[UTC 2019-3-2 15:29:42] 15:29:43 Received message from Master: op=Log open serial=74205 15:29:43 Log file open: Observatory C:\PKZPrograms\Logs\20190301 \ PKZ20190302152943_Observatory.txt 15:29:43 Previous log file: 15:29:47 Received message from Master: op=Log directory change serial=74207 15:29:47 Log file directory changed from C:\PKZPrograms\Logs\20190301 to C:\PKZPrograms\Logs\20190302 15:29:47 Log file name is PKZ20190302152947_Observatory.txt 15:33:38 Received message from Master: op=Identify serial=74215 15:43:38 No messages received for 10 min. 4492 sent since last one of these. 15:43:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 15:43:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 15:43:38 MsgArea S: [UTC 2019-3-2 15:43:50] 15:53:38 No messages received for 10 min. 0 sent since last one of these. 15:53:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 15:53:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 15:53:38 MsgArea S: 16:03:38 No messages received for 10 min. 0 sent since last one of these. 16:03:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 16:03:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:03:38 MsgArea S: [UTC 2019-3-2 16:03:50] 16:13:38 No messages received for 10 min. 0 sent since last one of these. 16:13:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 16:13:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:13:38 MsgArea S: 16:23:38 No messages received for 10 min. 0 sent since last one of these. 16:23:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 16:23:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:23:38 MsgArea S: [UTC 2019-3-2 16:23:50] 16:33:38 No messages received for 10 min. 0 sent since last one of these. 16:33:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 16:33:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:33:38 MsgArea S: 16:43:38 No messages received for 10 min. 0 sent since last one of these. 16:43:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 16:43:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:43:38 MsgArea S: [UTC 2019-3-2 16:43:50] 16:53:38 No messages received for 10 min. 0 sent since last one of these. 16:53:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 16:53:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:53:38 MsgArea S: 17:03:38 No messages received for 10 min. 0 sent since last one of these. 17:03:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 17:03:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:03:38 MsgArea S: [UTC 2019-3-2 17:03:50] 17:13:38 No messages received for 10 min. 0 sent since last one of these. 17:13:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 17:13:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:13:38 MsgArea S: 17:23:38 No messages received for 10 min. 0 sent since last one of these. 17:23:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 17:23:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:23:38 MsgArea S: [UTC 2019-3-2 17:23:50] 17:33:38 No messages received for 10 min. 0 sent since last one of these. 17:33:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 17:33:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:33:38 MsgArea S: 17:43:38 No messages received for 10 min. 0 sent since last one of these. 17:43:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 17:43:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:43:38 MsgArea S: [UTC 2019-3-2 17:43:50] 17:53:38 No messages received for 10 min. 0 sent since last one of these. 17:53:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 17:53:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:53:38 MsgArea S: 18:03:38 No messages received for 10 min. 0 sent since last one of these. 18:03:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 18:03:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:03:38 MsgArea S: [UTC 2019-3-2 18:03:50] 18:13:38 No messages received for 10 min. 0 sent since last one of these. 18:13:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 18:13:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:13:38 MsgArea S: 18:23:38 No messages received for 10 min. 0 sent since last one of these. 18:23:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 18:23:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:23:38 MsgArea S: [UTC 2019-3-2 18:23:50] 18:33:38 No messages received for 10 min. 0 sent since last one of these. 18:33:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 18:33:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:33:38 MsgArea S: 18:43:38 No messages received for 10 min. 0 sent since last one of these. 18:43:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 18:43:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:43:38 MsgArea S: [UTC 2019-3-2 18:43:50] 18:53:38 No messages received for 10 min. 0 sent since last one of these. 18:53:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 18:53:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:53:38 MsgArea S: 19:03:38 No messages received for 10 min. 0 sent since last one of these. 19:03:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 19:03:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:03:38 MsgArea S: [UTC 2019-3-2 19:03:50] 19:13:38 No messages received for 10 min. 0 sent since last one of these. 19:13:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 19:13:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:13:38 MsgArea S: 19:23:38 No messages received for 10 min. 0 sent since last one of these. 19:23:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 19:23:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:23:38 MsgArea S: [UTC 2019-3-2 19:23:50] 19:33:38 No messages received for 10 min. 0 sent since last one of these. 19:33:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 19:33:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:33:38 MsgArea S: 19:43:38 No messages received for 10 min. 0 sent since last one of these. 19:43:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 19:43:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:43:38 MsgArea S: [UTC 2019-3-2 19:43:50] 19:53:38 No messages received for 10 min. 0 sent since last one of these. 19:53:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 19:53:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:53:38 MsgArea S: 20:03:38 No messages received for 10 min. 0 sent since last one of these. 20:03:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 20:03:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:03:38 MsgArea S: [UTC 2019-3-2 20:03:50] 20:13:38 No messages received for 10 min. 0 sent since last one of these. 20:13:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 20:13:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:13:38 MsgArea S: 20:23:38 No messages received for 10 min. 0 sent since last one of these. 20:23:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 20:23:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:23:38 MsgArea S: [UTC 2019-3-2 20:23:50] 20:33:38 No messages received for 10 min. 0 sent since last one of these. 20:33:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 20:33:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:33:38 MsgArea S: 20:43:38 No messages received for 10 min. 0 sent since last one of these. 20:43:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 20:43:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:43:38 MsgArea S: [UTC 2019-3-2 20:43:50] 20:53:38 No messages received for 10 min. 0 sent since last one of these. 20:53:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 20:53:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:53:38 MsgArea S: 21:03:38 No messages received for 10 min. 0 sent since last one of these. 21:03:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 21:03:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:03:38 MsgArea S: [UTC 2019-3-2 21:03:50] 21:13:38 No messages received for 10 min. 0 sent since last one of these. 21:13:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 21:13:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:13:38 MsgArea S: 21:23:38 No messages received for 10 min. 0 sent since last one of these. 21:23:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 21:23:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:23:38 MsgArea S: [UTC 2019-3-2 21:23:50] 21:33:38 No messages received for 10 min. 0 sent since last one of these. 21:33:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 21:33:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:33:38 MsgArea S: 21:43:38 No messages received for 10 min. 0 sent since last one of these. 21:43:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 21:43:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:43:38 MsgArea S: [UTC 2019-3-2 21:43:50] 21:53:38 No messages received for 10 min. 0 sent since last one of these. 21:53:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 21:53:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:53:38 MsgArea S: 22:03:38 No messages received for 10 min. 0 sent since last one of these. 22:03:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 22:03:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:03:38 MsgArea S: [UTC 2019-3-2 22:03:50] 22:13:38 No messages received for 10 min. 0 sent since last one of these. 22:13:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 22:13:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:13:38 MsgArea S: 22:23:38 No messages received for 10 min. 0 sent since last one of these. 22:23:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 22:23:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:23:38 MsgArea S: [UTC 2019-3-2 22:23:50] 22:33:38 No messages received for 10 min. 0 sent since last one of these. 22:33:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 22:33:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:33:38 MsgArea S: 22:43:38 No messages received for 10 min. 0 sent since last one of these. 22:43:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 22:43:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:43:38 MsgArea S: [UTC 2019-3-2 22:43:50] 22:53:38 No messages received for 10 min. 0 sent since last one of these. 22:53:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 22:53:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:53:38 MsgArea S: 23:03:38 No messages received for 10 min. 0 sent since last one of these. 23:03:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 23:03:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:03:38 MsgArea S: [UTC 2019-3-2 23:03:50] 23:13:38 No messages received for 10 min. 0 sent since last one of these. 23:13:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 23:13:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:13:38 MsgArea S: 23:23:38 No messages received for 10 min. 0 sent since last one of these. 23:23:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 23:23:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:23:38 MsgArea S: [UTC 2019-3-2 23:23:50] 23:33:38 No messages received for 10 min. 0 sent since last one of these. 23:33:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 23:33:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:33:38 MsgArea S: 23:43:38 No messages received for 10 min. 0 sent since last one of these. 23:43:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 23:43:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:43:38 MsgArea S: [UTC 2019-3-2 23:43:50] 23:53:38 No messages received for 10 min. 0 sent since last one of these. 23:53:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 23:53:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:53:38 MsgArea S: 00:03:38 No messages received for 10 min. 0 sent since last one of these. 00:03:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 00:03:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:03:38 MsgArea S: [UTC 2019-3-3 00:03:50] 00:13:38 No messages received for 10 min. 0 sent since last one of these. 00:13:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 00:13:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:13:38 MsgArea S: 00:23:38 No messages received for 10 min. 0 sent since last one of these. 00:23:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 00:23:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:23:38 MsgArea S: [UTC 2019-3-3 00:23:50] 00:33:38 No messages received for 10 min. 0 sent since last one of these. 00:33:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 00:33:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:33:38 MsgArea S: 00:43:38 No messages received for 10 min. 0 sent since last one of these. 00:43:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 00:43:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:43:38 MsgArea S: [UTC 2019-3-3 00:43:50] 00:53:38 No messages received for 10 min. 0 sent since last one of these. 00:53:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 00:53:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:53:38 MsgArea S: 01:03:38 No messages received for 10 min. 0 sent since last one of these. 01:03:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 01:03:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:03:38 MsgArea S: [UTC 2019-3-3 01:03:50] 01:13:38 No messages received for 10 min. 0 sent since last one of these. 01:13:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 01:13:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:13:38 MsgArea S: 01:23:38 No messages received for 10 min. 0 sent since last one of these. 01:23:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 01:23:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:23:38 MsgArea S: [UTC 2019-3-3 01:23:50] 01:33:38 No messages received for 10 min. 0 sent since last one of these. 01:33:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 01:33:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:33:38 MsgArea S: 01:43:38 No messages received for 10 min. 0 sent since last one of these. 01:43:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 01:43:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:43:38 MsgArea S: [UTC 2019-3-3 01:43:50] 01:53:38 No messages received for 10 min. 0 sent since last one of these. 01:53:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 01:53:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:53:38 MsgArea S: 02:03:38 No messages received for 10 min. 0 sent since last one of these. 02:03:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 02:03:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:03:38 MsgArea S: [UTC 2019-3-3 02:03:50] 02:13:38 No messages received for 10 min. 0 sent since last one of these. 02:13:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 02:13:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:13:38 MsgArea S: 02:23:38 No messages received for 10 min. 0 sent since last one of these. 02:23:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 02:23:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:23:38 MsgArea S: [UTC 2019-3-3 02:23:50] 02:33:38 No messages received for 10 min. 0 sent since last one of these. 02:33:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 02:33:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:33:38 MsgArea S: 02:43:38 No messages received for 10 min. 0 sent since last one of these. 02:43:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 02:43:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:43:38 MsgArea S: [UTC 2019-3-3 02:43:50] 02:53:38 No messages received for 10 min. 0 sent since last one of these. 02:53:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 02:53:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:53:38 MsgArea S: 03:03:38 No messages received for 10 min. 0 sent since last one of these. 03:03:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 03:03:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 03:03:38 MsgArea S: [UTC 2019-3-3 03:03:50] 03:13:38 No messages received for 10 min. 0 sent since last one of these. 03:13:38 MsgArea H: nextMessageSerial=74218 startMsgs=68 nextFree=23052 maxMsg=65468 03:13:38 MsgArea Q: Master=22440:22848 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 03:13:38 MsgArea S: 03:18:34 Received message from Master: op=PointingHead serial=74219 03:18:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:18:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:18:34 Point started: ret=0 03:18:34 point_skyscan result=0 03:18:35 Check angles 03:18:35 SkyScan query 03:18:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:18:36 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:18:36 Message to Master queued w/err=0: serial=74219 error=0 03:18:41 Received message from Master: op=Filter serial=74220 03:18:41 Color wheel filter change from 2 to 2 03:18:41 FLIGetFilterPos err=0 currentPosition=2 03:18:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:18:41 Filter is already there-color wheel unchanged 03:18:41 Received message from Master: op=Shutter serial=74221 03:18:41 Shutter LASER close 03:18:42 Received message from Camera: op=State serial=74223 03:18:42 GetSingleValue result=40 Value=cccccccc 03:18:42 SkyScan query 03:18:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:18:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:43 Parameters OK 03:18:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:43 Set A/D data flow result=40 03:18:43 Set A/D channel type result=40 03:18:43 Set A/D encoding result=40 03:18:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:43 Set channel filter=0.000000e+000 result=40 03:18:43 Config A/D Result=40 03:18:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:43 Get A/D filter: -9.255963e+061 result=40 03:18:43 Get A/D value=-858993460 result=40 03:18:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:43 Parameters OK 03:18:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:43 Set A/D data flow result=40 03:18:43 Set A/D channel type result=40 03:18:43 Set A/D encoding result=40 03:18:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:43 Set channel filter=0.000000e+000 result=40 03:18:43 Config A/D Result=40 03:18:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:43 Get A/D filter: -9.255963e+061 result=40 03:18:43 Get A/D value=-858993460 result=40 03:18:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:18:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:18:43 Aux= 03:18:43 Message to Camera, serial 74223 queued 03:18:49 Received message from Master: op=PointingHead serial=74234 03:18:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:18:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:18:49 Point started: ret=0 03:18:49 point_skyscan result=0 03:18:50 Check angles 03:18:50 SkyScan query 03:18:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:18:50 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:18:50 Message to Master queued w/err=0: serial=74234 error=0 03:18:55 Received message from Master: op=Filter serial=74235 03:18:55 Color wheel filter change from 2 to 2 03:18:55 FLIGetFilterPos err=0 currentPosition=2 03:18:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:18:55 Filter is already there-color wheel unchanged 03:18:56 Received message from Master: op=Shutter serial=74236 03:18:56 Shutter LASER close 03:18:56 Received message from Camera: op=State serial=74238 03:18:56 GetSingleValue result=40 Value=cccccccc 03:18:56 SkyScan query 03:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:18:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:56 Parameters OK 03:18:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:56 Set A/D data flow result=40 03:18:56 Set A/D channel type result=40 03:18:56 Set A/D encoding result=40 03:18:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:56 Set channel filter=0.000000e+000 result=40 03:18:56 Config A/D Result=40 03:18:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:56 Get A/D filter: -9.255963e+061 result=40 03:18:56 Get A/D value=-858993460 result=40 03:18:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:56 Parameters OK 03:18:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:56 Set A/D data flow result=40 03:18:56 Set A/D channel type result=40 03:18:56 Set A/D encoding result=40 03:18:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:56 Set channel filter=0.000000e+000 result=40 03:18:56 Config A/D Result=40 03:18:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:56 Get A/D filter: -9.255963e+061 result=40 03:18:56 Get A/D value=-858993460 result=40 03:18:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:18:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:18:56 Aux= 03:18:56 Message to Camera, serial 74238 queued 03:19:32 Received message from Master: op=PointingHead serial=74250 03:19:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:19:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:19:32 Point started: ret=0 03:19:32 point_skyscan result=0 03:19:33 Check angles 03:19:33 SkyScan query 03:19:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:19:34 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:19:34 Message to Master queued w/err=0: serial=74250 error=0 03:19:39 Received message from Master: op=Filter serial=74251 03:19:39 Color wheel filter change from 2 to 2 03:19:39 FLIGetFilterPos err=0 currentPosition=2 03:19:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:39 Filter is already there-color wheel unchanged 03:19:39 Received message from Master: op=Shutter serial=74252 03:19:39 Shutter LASER open 03:19:39 Received message from Camera: op=State serial=74254 03:19:39 GetSingleValue result=40 Value=cccccccc 03:19:39 SkyScan query 03:19:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:19:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:40 Parameters OK 03:19:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:40 Set A/D data flow result=40 03:19:40 Set A/D channel type result=40 03:19:40 Set A/D encoding result=40 03:19:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:40 Set channel filter=0.000000e+000 result=40 03:19:40 Config A/D Result=40 03:19:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:40 Get A/D filter: -9.255963e+061 result=40 03:19:40 Get A/D value=-858993460 result=40 03:19:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:40 Parameters OK 03:19:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:40 Set A/D data flow result=40 03:19:40 Set A/D channel type result=40 03:19:40 Set A/D encoding result=40 03:19:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:40 Set channel filter=0.000000e+000 result=40 03:19:40 Config A/D Result=40 03:19:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:40 Get A/D filter: -9.255963e+061 result=40 03:19:40 Get A/D value=-858993460 result=40 03:19:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:40 Aux= 03:19:40 Message to Camera, serial 74254 queued 03:19:48 Received message from Master: op=Shutter serial=74264 03:19:48 Shutter LASER close 03:19:49 Received message from Master: op=PointingHead serial=74268 03:19:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:19:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:19:49 Point started: ret=0 03:19:49 point_skyscan result=0 03:19:50 Check angles 03:19:50 SkyScan query 03:19:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:19:50 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:19:50 Message to Master queued w/err=0: serial=74268 error=0 03:19:55 Received message from Master: op=Filter serial=74269 03:19:55 Color wheel filter change from 2 to 2 03:19:55 FLIGetFilterPos err=0 currentPosition=2 03:19:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:55 Filter is already there-color wheel unchanged 03:19:55 Received message from Master: op=Shutter serial=74270 03:19:55 Shutter LASER close 03:19:56 Received message from Camera: op=State serial=74272 03:19:56 GetSingleValue result=40 Value=cccccccc 03:19:56 SkyScan query 03:19:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:19:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:56 Parameters OK 03:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:56 Set A/D data flow result=40 03:19:56 Set A/D channel type result=40 03:19:56 Set A/D encoding result=40 03:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:56 Set channel filter=0.000000e+000 result=40 03:19:56 Config A/D Result=40 03:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:56 Get A/D filter: -9.255963e+061 result=40 03:19:56 Get A/D value=-858993460 result=40 03:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:56 Parameters OK 03:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:56 Set A/D data flow result=40 03:19:56 Set A/D channel type result=40 03:19:56 Set A/D encoding result=40 03:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:56 Set channel filter=0.000000e+000 result=40 03:19:56 Config A/D Result=40 03:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:56 Get A/D filter: -9.255963e+061 result=40 03:19:56 Get A/D value=-858993460 result=40 03:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:56 Aux= 03:19:56 Message to Camera, serial 74272 queued 03:20:04 Received message from Master: op=PointingHead serial=74284 03:20:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:20:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:20:04 Point started: ret=0 03:20:04 point_skyscan result=0 03:20:05 Check angles 03:20:05 SkyScan query 03:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 03:20:06 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 03:20:06 Check angles 03:20:06 SkyScan query 03:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 03:20:07 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 03:20:07 Check angles 03:20:07 SkyScan query 03:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 03:20:07 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 03:20:07 Check angles 03:20:07 SkyScan query 03:20:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 03:20:08 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 03:20:08 Check angles 03:20:08 SkyScan query 03:20:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.995<-15933 Statuses=0008 0009 03:20:09 Msec=3000 True Az=112.995 Ze=-58.995 Az status=0008 Ze status=0009 03:20:09 Check angles 03:20:09 SkyScan query 03:20:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 03:20:10 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 03:20:10 Check angles 03:20:10 SkyScan query 03:20:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.07<-13138 Statuses=0008 0009 03:20:10 Msec=4500 True Az=112.995 Ze=-17.07 Az status=0008 Ze status=0009 03:20:10 Check angles 03:20:10 SkyScan query 03:20:11 SkyScan query done: ret=0 az=112.995<-7533 ze=3.885<-11741 Statuses=0008 0009 03:20:11 Msec=5250 True Az=112.995 Ze=3.885 Az status=0008 Ze status=0009 03:20:11 Check angles 03:20:11 SkyScan query 03:20:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:20:12 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:20:12 Message to Master queued w/err=0: serial=74284 error=0 03:20:17 Received message from Master: op=Filter serial=74285 03:20:17 Color wheel filter change from 2 to 0 03:20:17 FLIGetFilterPos err=0 currentPosition=2 03:20:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:23 FLISetFilterPos err=0 rqPosition=0 03:20:23 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:23 Check after 0.00 sec for filter wheel DIn/CWh=0 03:20:23 FLIGetFilterPos err=0 currentPosition=0 03:20:23 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:23 Received message from Master: op=Shutter serial=74286 03:20:23 Shutter LASER close 03:20:23 Received message from Camera: op=State serial=74288 03:20:23 GetSingleValue result=40 Value=cccccccc 03:20:23 SkyScan query 03:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:20:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:24 Parameters OK 03:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:24 Set A/D data flow result=40 03:20:24 Set A/D channel type result=40 03:20:24 Set A/D encoding result=40 03:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:24 Set channel filter=0.000000e+000 result=40 03:20:24 Config A/D Result=40 03:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:24 Get A/D filter: -9.255963e+061 result=40 03:20:24 Get A/D value=-858993460 result=40 03:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:24 Parameters OK 03:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:24 Set A/D data flow result=40 03:20:24 Set A/D channel type result=40 03:20:24 Set A/D encoding result=40 03:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:24 Set channel filter=0.000000e+000 result=40 03:20:24 Config A/D Result=40 03:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:24 Get A/D filter: -9.255963e+061 result=40 03:20:24 Get A/D value=-858993460 result=40 03:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:20:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:20:24 Aux= 03:20:24 Message to Camera, serial 74288 queued 03:21:01 Received message from Master: op=PointingHead serial=74301 03:21:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:21:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:21:01 Point started: ret=0 03:21:01 point_skyscan result=0 03:21:02 Check angles 03:21:02 SkyScan query 03:21:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:21:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:21:02 Message to Master queued w/err=0: serial=74301 error=0 03:21:07 Received message from Master: op=Filter serial=74302 03:21:07 Color wheel filter change from 0 to 0 03:21:07 FLIGetFilterPos err=0 currentPosition=0 03:21:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:21:07 Filter is already there-color wheel unchanged 03:21:08 Received message from Master: op=Shutter serial=74303 03:21:08 Shutter LASER close 03:21:08 Received message from Camera: op=State serial=74305 03:21:08 GetSingleValue result=40 Value=cccccccc 03:21:08 SkyScan query 03:21:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:21:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:08 Parameters OK 03:21:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:08 Set A/D data flow result=40 03:21:08 Set A/D channel type result=40 03:21:08 Set A/D encoding result=40 03:21:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:08 Set channel filter=0.000000e+000 result=40 03:21:08 Config A/D Result=40 03:21:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:08 Get A/D filter: -9.255963e+061 result=40 03:21:08 Get A/D value=-858993460 result=40 03:21:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:08 Parameters OK 03:21:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:08 Set A/D data flow result=40 03:21:08 Set A/D channel type result=40 03:21:08 Set A/D encoding result=40 03:21:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:08 Set channel filter=0.000000e+000 result=40 03:21:08 Config A/D Result=40 03:21:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:08 Get A/D filter: -9.255963e+061 result=40 03:21:08 Get A/D value=-858993460 result=40 03:21:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:21:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:21:08 Aux= 03:21:08 Message to Camera, serial 74305 queued 03:21:45 Received message from Master: op=PointingHead serial=74318 03:21:45 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:21:45 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:21:45 Point started: ret=0 03:21:45 point_skyscan result=0 03:21:46 Check angles 03:21:46 SkyScan query 03:21:47 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 03:21:47 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 03:21:47 Check angles 03:21:47 SkyScan query 03:21:47 SkyScan query done: ret=0 az=153.36<-10224 ze=-6.495<-12433 Statuses=0009 0008 03:21:47 Msec=750 True Az=153.36 Ze=-6.495 Az status=0009 Ze status=0008 03:21:48 Check angles 03:21:48 SkyScan query 03:21:48 SkyScan query done: ret=0 az=170.805<-11387 ze=-6.495<-12433 Statuses=0009 0008 03:21:48 Msec=1500 True Az=170.805 Ze=-6.495 Az status=0009 Ze status=0008 03:21:48 Check angles 03:21:48 SkyScan query 03:21:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 03:21:49 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 03:21:49 Message to Master queued w/err=0: serial=74318 error=0 03:21:54 Received message from Master: op=Filter serial=74319 03:21:54 Color wheel filter change from 0 to 0 03:21:54 FLIGetFilterPos err=0 currentPosition=0 03:21:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:21:54 Filter is already there-color wheel unchanged 03:21:54 Received message from Master: op=Shutter serial=74320 03:21:54 Shutter LASER close 03:21:54 Received message from Camera: op=State serial=74322 03:21:54 GetSingleValue result=40 Value=cccccccc 03:21:54 SkyScan query 03:21:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:21:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:55 Parameters OK 03:21:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:55 Set A/D data flow result=40 03:21:55 Set A/D channel type result=40 03:21:55 Set A/D encoding result=40 03:21:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:55 Set channel filter=0.000000e+000 result=40 03:21:55 Config A/D Result=40 03:21:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:55 Get A/D filter: -9.255963e+061 result=40 03:21:55 Get A/D value=-858993460 result=40 03:21:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:55 Parameters OK 03:21:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:55 Set A/D data flow result=40 03:21:55 Set A/D channel type result=40 03:21:55 Set A/D encoding result=40 03:21:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:55 Set channel filter=0.000000e+000 result=40 03:21:55 Config A/D Result=40 03:21:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:55 Get A/D filter: -9.255963e+061 result=40 03:21:55 Get A/D value=-858993460 result=40 03:21:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:21:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:21:55 Aux= 03:21:55 Message to Camera, serial 74322 queued 03:22:32 Received message from Master: op=PointingHead serial=74335 03:22:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:22:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:22:32 Point started: ret=0 03:22:32 point_skyscan result=0 03:22:33 Check angles 03:22:33 SkyScan query 03:22:33 SkyScan query done: ret=0 az=152.52<-10168 ze=6.51<-11566 Statuses=0009 0008 03:22:33 Msec=0 True Az=152.52 Ze=6.51 Az status=0009 Ze status=0008 03:22:33 Check angles 03:22:33 SkyScan query 03:22:34 SkyScan query done: ret=0 az=134.655<-8977 ze=6.495<-11567 Statuses=0009 0008 03:22:34 Msec=750 True Az=134.655 Ze=6.495 Az status=0009 Ze status=0008 03:22:34 Check angles 03:22:34 SkyScan query 03:22:35 SkyScan query done: ret=0 az=117.24<-7816 ze=6.495<-11567 Statuses=0009 0008 03:22:35 Msec=1500 True Az=117.24 Ze=6.495 Az status=0009 Ze status=0008 03:22:35 Check angles 03:22:35 SkyScan query 03:22:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:22:36 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:22:36 Message to Master queued w/err=0: serial=74335 error=0 03:22:41 Received message from Master: op=Filter serial=74336 03:22:41 Color wheel filter change from 0 to 0 03:22:41 FLIGetFilterPos err=0 currentPosition=0 03:22:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:41 Filter is already there-color wheel unchanged 03:22:41 Received message from Master: op=Shutter serial=74337 03:22:41 Shutter LASER close 03:22:41 Received message from Camera: op=State serial=74339 03:22:41 GetSingleValue result=40 Value=cccccccc 03:22:41 SkyScan query 03:22:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:22:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:41 Parameters OK 03:22:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:41 Set A/D data flow result=40 03:22:41 Set A/D channel type result=40 03:22:41 Set A/D encoding result=40 03:22:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:41 Set channel filter=0.000000e+000 result=40 03:22:41 Config A/D Result=40 03:22:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:41 Get A/D filter: -9.255963e+061 result=40 03:22:41 Get A/D value=-858993460 result=40 03:22:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:41 Parameters OK 03:22:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:41 Set A/D data flow result=40 03:22:41 Set A/D channel type result=40 03:22:41 Set A/D encoding result=40 03:22:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:41 Set channel filter=0.000000e+000 result=40 03:22:41 Config A/D Result=40 03:22:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:41 Get A/D filter: -9.255963e+061 result=40 03:22:41 Get A/D value=-858993460 result=40 03:22:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:22:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:22:41 Aux= 03:22:41 Message to Camera, serial 74339 queued 03:23:18 Received message from Master: op=PointingHead serial=74352 03:23:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:23:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:23:19 Point started: ret=0 03:23:19 point_skyscan result=0 03:23:19 Check angles 03:23:19 SkyScan query 03:23:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.745<-13583 Statuses=0008 0009 03:23:20 Msec=0 True Az=112.995 Ze=-23.745 Az status=0008 Ze status=0009 03:23:20 Check angles 03:23:20 SkyScan query 03:23:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 03:23:21 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 03:23:21 Check angles 03:23:21 SkyScan query 03:23:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 03:23:21 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 03:23:22 Check angles 03:23:22 SkyScan query 03:23:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 03:23:22 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 03:23:22 Check angles 03:23:22 SkyScan query 03:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-108<-19200 Statuses=0008 0009 03:23:23 Msec=3000 True Az=112.995 Ze=-108 Az status=0008 Ze status=0009 03:23:23 Check angles 03:23:23 SkyScan query 03:23:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.39<-20626 Statuses=0008 0009 03:23:24 Msec=3750 True Az=112.995 Ze=-129.39 Az status=0008 Ze status=0009 03:23:24 Check angles 03:23:24 SkyScan query 03:23:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.75<-22050 Statuses=0008 0009 03:23:24 Msec=4500 True Az=112.995 Ze=-150.75 Az status=0008 Ze status=0009 03:23:25 Check angles 03:23:25 SkyScan query 03:23:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0008 0009 03:23:25 Msec=5250 True Az=112.995 Ze=-171.45 Az status=0008 Ze status=0009 03:23:25 Check angles 03:23:25 SkyScan query 03:23:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:23:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:23:26 Message to Master queued w/err=0: serial=74352 error=0 03:23:31 Received message from Master: op=Filter serial=74353 03:23:31 Color wheel filter change from 0 to 0 03:23:31 FLIGetFilterPos err=0 currentPosition=0 03:23:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:31 Filter is already there-color wheel unchanged 03:23:31 Received message from Master: op=Shutter serial=74354 03:23:31 Shutter LASER open 03:23:31 Received message from Camera: op=State serial=74356 03:23:31 GetSingleValue result=40 Value=cccccccc 03:23:31 SkyScan query 03:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:23:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:32 Parameters OK 03:23:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:32 Set A/D data flow result=40 03:23:32 Set A/D channel type result=40 03:23:32 Set A/D encoding result=40 03:23:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:32 Set channel filter=0.000000e+000 result=40 03:23:32 Config A/D Result=40 03:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:32 Get A/D filter: -9.255963e+061 result=40 03:23:32 Get A/D value=-858993460 result=40 03:23:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:32 Parameters OK 03:23:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:32 Set A/D data flow result=40 03:23:32 Set A/D channel type result=40 03:23:32 Set A/D encoding result=40 03:23:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:32 Set channel filter=0.000000e+000 result=40 03:23:32 Config A/D Result=40 03:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:32 Get A/D filter: -9.255963e+061 result=40 03:23:32 Get A/D value=-858993460 result=40 03:23:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:32 Aux= 03:23:32 Message to Camera, serial 74356 queued 03:23:40 Received message from Master: op=Shutter serial=74366 03:23:40 Shutter LASER close 03:23:41 Received message from Master: op=PointingHead serial=74370 03:23:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:23:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:23:41 Point started: ret=0 03:23:41 point_skyscan result=0 03:23:42 Check angles 03:23:42 SkyScan query 03:23:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 03:23:42 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 03:23:43 Check angles 03:23:43 SkyScan query 03:23:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.62<-20108 Statuses=0008 0009 03:23:43 Msec=750 True Az=112.995 Ze=-121.62 Az status=0008 Ze status=0009 03:23:43 Check angles 03:23:43 SkyScan query 03:23:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 03:23:44 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 03:23:44 Check angles 03:23:44 SkyScan query 03:23:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 03:23:45 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 03:23:45 Check angles 03:23:45 SkyScan query 03:23:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.74<-15916 Statuses=0008 0009 03:23:45 Msec=3000 True Az=112.995 Ze=-58.74 Az status=0008 Ze status=0009 03:23:46 Check angles 03:23:46 SkyScan query 03:23:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.785<-14519 Statuses=0008 0009 03:23:46 Msec=3750 True Az=112.995 Ze=-37.785 Az status=0008 Ze status=0009 03:23:46 Check angles 03:23:46 SkyScan query 03:23:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.41<-13094 Statuses=0008 0009 03:23:47 Msec=4500 True Az=112.995 Ze=-16.41 Az status=0008 Ze status=0009 03:23:47 Check angles 03:23:47 SkyScan query 03:23:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.455<-11703 Statuses=0008 0009 03:23:48 Msec=5250 True Az=112.995 Ze=4.455 Az status=0008 Ze status=0009 03:23:48 Check angles 03:23:48 SkyScan query 03:23:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:23:48 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:23:48 Message to Master queued w/err=0: serial=74370 error=0 [UTC 2019-3-3 03:23:50] 03:23:53 Received message from Master: op=Filter serial=74371 03:23:53 Color wheel filter change from 0 to 0 03:23:53 FLIGetFilterPos err=0 currentPosition=0 03:23:53 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:53 Filter is already there-color wheel unchanged 03:23:54 Received message from Master: op=Shutter serial=74372 03:23:54 Shutter LASER close 03:23:54 Received message from Camera: op=State serial=74374 03:23:54 GetSingleValue result=40 Value=cccccccc 03:23:54 SkyScan query 03:23:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:23:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:54 Parameters OK 03:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:54 Set A/D data flow result=40 03:23:54 Set A/D channel type result=40 03:23:54 Set A/D encoding result=40 03:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:54 Set channel filter=0.000000e+000 result=40 03:23:54 Config A/D Result=40 03:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:54 Get A/D filter: -9.255963e+061 result=40 03:23:54 Get A/D value=-858993460 result=40 03:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:54 Parameters OK 03:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:54 Set A/D data flow result=40 03:23:54 Set A/D channel type result=40 03:23:54 Set A/D encoding result=40 03:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:54 Set channel filter=0.000000e+000 result=40 03:23:54 Config A/D Result=40 03:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:54 Get A/D filter: -9.255963e+061 result=40 03:23:54 Get A/D value=-858993460 result=40 03:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:54 Aux= 03:23:54 Message to Camera, serial 74374 queued 03:24:30 Received message from Master: op=PointingHead serial=74386 03:24:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:24:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:24:31 Point started: ret=0 03:24:31 point_skyscan result=0 03:24:31 Check angles 03:24:31 SkyScan query 03:24:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:24:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:24:32 Message to Master queued w/err=0: serial=74386 error=0 03:24:37 Received message from Master: op=Filter serial=74387 03:24:37 Color wheel filter change from 0 to 0 03:24:37 FLIGetFilterPos err=0 currentPosition=0 03:24:37 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:37 Filter is already there-color wheel unchanged 03:24:37 Received message from Master: op=Shutter serial=74388 03:24:37 Shutter LASER close 03:24:37 Received message from Camera: op=State serial=74390 03:24:37 GetSingleValue result=40 Value=cccccccc 03:24:37 SkyScan query 03:24:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:24:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:38 Parameters OK 03:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:38 Set A/D data flow result=40 03:24:38 Set A/D channel type result=40 03:24:38 Set A/D encoding result=40 03:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:38 Set channel filter=0.000000e+000 result=40 03:24:38 Config A/D Result=40 03:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:38 Get A/D filter: -9.255963e+061 result=40 03:24:38 Get A/D value=-858993460 result=40 03:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:38 Parameters OK 03:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:38 Set A/D data flow result=40 03:24:38 Set A/D channel type result=40 03:24:38 Set A/D encoding result=40 03:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:38 Set channel filter=0.000000e+000 result=40 03:24:38 Config A/D Result=40 03:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:38 Get A/D filter: -9.255963e+061 result=40 03:24:38 Get A/D value=-858993460 result=40 03:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:38 Aux= 03:24:38 Message to Camera, serial 74390 queued 03:25:15 Received message from Master: op=PointingHead serial=74403 03:25:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:25:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:25:15 Point started: ret=0 03:25:15 point_skyscan result=0 03:25:16 Check angles 03:25:16 SkyScan query 03:25:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:25:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:25:16 Message to Master queued w/err=0: serial=74403 error=0 03:25:21 Received message from Master: op=Filter serial=74404 03:25:21 Color wheel filter change from 0 to 0 03:25:21 FLIGetFilterPos err=0 currentPosition=0 03:25:21 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:21 Filter is already there-color wheel unchanged 03:25:21 Received message from Master: op=Shutter serial=74405 03:25:21 Shutter LASER close 03:25:21 Received message from Camera: op=State serial=74407 03:25:21 GetSingleValue result=40 Value=cccccccc 03:25:21 SkyScan query 03:25:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:25:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:22 Parameters OK 03:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:22 Set A/D data flow result=40 03:25:22 Set A/D channel type result=40 03:25:22 Set A/D encoding result=40 03:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:22 Set channel filter=0.000000e+000 result=40 03:25:22 Config A/D Result=40 03:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:22 Get A/D filter: -9.255963e+061 result=40 03:25:22 Get A/D value=-858993460 result=40 03:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:22 Parameters OK 03:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:22 Set A/D data flow result=40 03:25:22 Set A/D channel type result=40 03:25:22 Set A/D encoding result=40 03:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:22 Set channel filter=0.000000e+000 result=40 03:25:22 Config A/D Result=40 03:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:22 Get A/D filter: -9.255963e+061 result=40 03:25:22 Get A/D value=-858993460 result=40 03:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:22 Aux= 03:25:22 Message to Camera, serial 74407 queued 03:25:59 Received message from Master: op=PointingHead serial=74420 03:25:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:25:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:25:59 Point started: ret=0 03:25:59 point_skyscan result=0 03:26:00 Check angles 03:26:00 SkyScan query 03:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:26:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:26:00 Message to Master queued w/err=0: serial=74420 error=0 03:26:05 Received message from Master: op=Filter serial=74421 03:26:05 Color wheel filter change from 0 to 0 03:26:05 FLIGetFilterPos err=0 currentPosition=0 03:26:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:05 Filter is already there-color wheel unchanged 03:26:06 Received message from Master: op=Shutter serial=74422 03:26:06 Shutter LASER close 03:26:06 Received message from Camera: op=State serial=74424 03:26:06 GetSingleValue result=40 Value=cccccccc 03:26:06 SkyScan query 03:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:26:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:06 Parameters OK 03:26:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:06 Set A/D data flow result=40 03:26:06 Set A/D channel type result=40 03:26:06 Set A/D encoding result=40 03:26:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:06 Set channel filter=0.000000e+000 result=40 03:26:06 Config A/D Result=40 03:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:06 Get A/D filter: -9.255963e+061 result=40 03:26:06 Get A/D value=-858993460 result=40 03:26:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:06 Parameters OK 03:26:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:06 Set A/D data flow result=40 03:26:06 Set A/D channel type result=40 03:26:06 Set A/D encoding result=40 03:26:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:06 Set channel filter=0.000000e+000 result=40 03:26:06 Config A/D Result=40 03:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:06 Get A/D filter: -9.255963e+061 result=40 03:26:06 Get A/D value=-858993460 result=40 03:26:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:06 Aux= 03:26:06 Message to Camera, serial 74424 queued 03:26:43 Received message from Master: op=PointingHead serial=74437 03:26:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:26:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:26:43 Point started: ret=0 03:26:43 point_skyscan result=0 03:26:44 Check angles 03:26:44 SkyScan query 03:26:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 03:26:45 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 03:26:45 Check angles 03:26:45 SkyScan query 03:26:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 03:26:46 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 03:26:46 Check angles 03:26:46 SkyScan query 03:26:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.79<-16386 Statuses=0008 0009 03:26:46 Msec=1500 True Az=112.995 Ze=-65.79 Az status=0008 Ze status=0009 03:26:46 Check angles 03:26:46 SkyScan query 03:26:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.745<-17783 Statuses=0008 0009 03:26:47 Msec=2250 True Az=112.995 Ze=-86.745 Az status=0008 Ze status=0009 03:26:47 Check angles 03:26:47 SkyScan query 03:26:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.7<-19180 Statuses=0008 0009 03:26:48 Msec=3000 True Az=112.995 Ze=-107.7 Az status=0008 Ze status=0009 03:26:48 Check angles 03:26:48 SkyScan query 03:26:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 03:26:49 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 03:26:49 Check angles 03:26:49 SkyScan query 03:26:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.045<-22003 Statuses=0008 0009 03:26:49 Msec=4500 True Az=112.995 Ze=-150.045 Az status=0008 Ze status=0009 03:26:49 Check angles 03:26:49 SkyScan query 03:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0008 0009 03:26:50 Msec=5250 True Az=112.995 Ze=-170.895 Az status=0008 Ze status=0009 03:26:50 Check angles 03:26:50 SkyScan query 03:26:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:26:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:26:51 Message to Master queued w/err=0: serial=74437 error=0 03:26:56 Received message from Master: op=Filter serial=74438 03:26:56 Color wheel filter change from 0 to 0 03:26:56 FLIGetFilterPos err=0 currentPosition=0 03:26:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:56 Filter is already there-color wheel unchanged 03:26:56 Received message from Master: op=Shutter serial=74439 03:26:56 Shutter LASER open 03:26:56 Received message from Camera: op=State serial=74441 03:26:56 GetSingleValue result=40 Value=cccccccc 03:26:56 SkyScan query 03:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:26:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:57 Parameters OK 03:26:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:57 Set A/D data flow result=40 03:26:57 Set A/D channel type result=40 03:26:57 Set A/D encoding result=40 03:26:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:57 Set channel filter=0.000000e+000 result=40 03:26:57 Config A/D Result=40 03:26:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:57 Get A/D filter: -9.255963e+061 result=40 03:26:57 Get A/D value=-858993460 result=40 03:26:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:57 Parameters OK 03:26:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:57 Set A/D data flow result=40 03:26:57 Set A/D channel type result=40 03:26:57 Set A/D encoding result=40 03:26:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:57 Set channel filter=0.000000e+000 result=40 03:26:57 Config A/D Result=40 03:26:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:57 Get A/D filter: -9.255963e+061 result=40 03:26:57 Get A/D value=-858993460 result=40 03:26:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:57 Aux= 03:26:57 Message to Camera, serial 74441 queued 03:27:05 Received message from Master: op=Shutter serial=74451 03:27:05 Shutter LASER close 03:27:06 Received message from Master: op=PointingHead serial=74455 03:27:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:27:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:27:06 Point started: ret=0 03:27:06 point_skyscan result=0 03:27:07 Check angles 03:27:07 SkyScan query 03:27:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 03:27:07 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 03:27:08 Check angles 03:27:08 SkyScan query 03:27:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.605<-20107 Statuses=0008 0009 03:27:08 Msec=750 True Az=112.995 Ze=-121.605 Az status=0008 Ze status=0009 03:27:08 Check angles 03:27:08 SkyScan query 03:27:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 03:27:09 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 03:27:09 Check angles 03:27:09 SkyScan query 03:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 03:27:10 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 03:27:10 Check angles 03:27:10 SkyScan query 03:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.755<-15917 Statuses=0008 0009 03:27:10 Msec=3000 True Az=112.995 Ze=-58.755 Az status=0008 Ze status=0009 03:27:11 Check angles 03:27:11 SkyScan query 03:27:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.365<-14491 Statuses=0008 0009 03:27:11 Msec=3750 True Az=112.995 Ze=-37.365 Az status=0008 Ze status=0009 03:27:11 Check angles 03:27:11 SkyScan query 03:27:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.41<-13094 Statuses=0008 0009 03:27:12 Msec=4500 True Az=112.995 Ze=-16.41 Az status=0008 Ze status=0009 03:27:12 Check angles 03:27:12 SkyScan query 03:27:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.455<-11703 Statuses=0008 0009 03:27:13 Msec=5250 True Az=112.995 Ze=4.455 Az status=0008 Ze status=0009 03:27:13 Check angles 03:27:13 SkyScan query 03:27:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:27:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:27:13 Message to Master queued w/err=0: serial=74455 error=0 03:27:18 Received message from Master: op=Filter serial=74456 03:27:18 Color wheel filter change from 0 to 0 03:27:18 FLIGetFilterPos err=0 currentPosition=0 03:27:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:18 Filter is already there-color wheel unchanged 03:27:19 Received message from Master: op=Shutter serial=74457 03:27:19 Shutter LASER close 03:27:19 Received message from Camera: op=State serial=74459 03:27:19 GetSingleValue result=40 Value=cccccccc 03:27:19 SkyScan query 03:27:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:27:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:19 Parameters OK 03:27:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:19 Set A/D data flow result=40 03:27:19 Set A/D channel type result=40 03:27:19 Set A/D encoding result=40 03:27:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:19 Set channel filter=0.000000e+000 result=40 03:27:19 Config A/D Result=40 03:27:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:19 Get A/D filter: -9.255963e+061 result=40 03:27:19 Get A/D value=-858993460 result=40 03:27:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:19 Parameters OK 03:27:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:19 Set A/D data flow result=40 03:27:19 Set A/D channel type result=40 03:27:19 Set A/D encoding result=40 03:27:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:19 Set channel filter=0.000000e+000 result=40 03:27:19 Config A/D Result=40 03:27:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:19 Get A/D filter: -9.255963e+061 result=40 03:27:19 Get A/D value=-858993460 result=40 03:27:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:19 Aux= 03:27:19 Message to Camera, serial 74459 queued 03:27:56 Received message from Master: op=PointingHead serial=74472 03:27:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:27:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:27:57 Point started: ret=0 03:27:57 point_skyscan result=0 03:27:57 Check angles 03:27:57 SkyScan query 03:27:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:27:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:27:58 Message to Master queued w/err=0: serial=74472 error=0 03:28:03 Received message from Master: op=Filter serial=74473 03:28:03 Color wheel filter change from 0 to 0 03:28:03 FLIGetFilterPos err=0 currentPosition=0 03:28:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:03 Filter is already there-color wheel unchanged 03:28:03 Received message from Master: op=Shutter serial=74474 03:28:03 Shutter LASER close 03:28:03 Received message from Camera: op=State serial=74476 03:28:03 GetSingleValue result=40 Value=cccccccc 03:28:03 SkyScan query 03:28:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:28:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:04 Parameters OK 03:28:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:04 Set A/D data flow result=40 03:28:04 Set A/D channel type result=40 03:28:04 Set A/D encoding result=40 03:28:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:04 Set channel filter=0.000000e+000 result=40 03:28:04 Config A/D Result=40 03:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:04 Get A/D filter: -9.255963e+061 result=40 03:28:04 Get A/D value=-858993460 result=40 03:28:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:04 Parameters OK 03:28:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:04 Set A/D data flow result=40 03:28:04 Set A/D channel type result=40 03:28:04 Set A/D encoding result=40 03:28:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:04 Set channel filter=0.000000e+000 result=40 03:28:04 Config A/D Result=40 03:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:04 Get A/D filter: -9.255963e+061 result=40 03:28:04 Get A/D value=-858993460 result=40 03:28:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:04 Aux= 03:28:04 Message to Camera, serial 74476 queued 03:28:40 Received message from Master: op=PointingHead serial=74489 03:28:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:28:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:28:41 Point started: ret=0 03:28:41 point_skyscan result=0 03:28:42 Check angles 03:28:42 SkyScan query 03:28:42 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 03:28:42 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 03:28:42 Check angles 03:28:42 SkyScan query 03:28:43 SkyScan query done: ret=0 az=153.765<-10251 ze=-6.495<-12433 Statuses=0009 0008 03:28:43 Msec=750 True Az=153.765 Ze=-6.495 Az status=0009 Ze status=0008 03:28:43 Check angles 03:28:43 SkyScan query 03:28:44 SkyScan query done: ret=0 az=171.285<-11419 ze=-6.495<-12433 Statuses=0009 0008 03:28:44 Msec=1500 True Az=171.285 Ze=-6.495 Az status=0009 Ze status=0008 03:28:44 Check angles 03:28:44 SkyScan query 03:28:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:28:44 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:28:44 Message to Master queued w/err=0: serial=74489 error=0 03:28:49 Received message from Master: op=Filter serial=74490 03:28:49 Color wheel filter change from 0 to 0 03:28:49 FLIGetFilterPos err=0 currentPosition=0 03:28:49 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:49 Filter is already there-color wheel unchanged 03:28:50 Received message from Master: op=Shutter serial=74491 03:28:50 Shutter LASER close 03:28:50 Received message from Camera: op=State serial=74493 03:28:50 GetSingleValue result=40 Value=cccccccc 03:28:50 SkyScan query 03:28:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:28:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:50 Parameters OK 03:28:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:50 Set A/D data flow result=40 03:28:50 Set A/D channel type result=40 03:28:50 Set A/D encoding result=40 03:28:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:50 Set channel filter=0.000000e+000 result=40 03:28:50 Config A/D Result=40 03:28:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:50 Get A/D filter: -9.255963e+061 result=40 03:28:50 Get A/D value=-858993460 result=40 03:28:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:50 Parameters OK 03:28:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:50 Set A/D data flow result=40 03:28:50 Set A/D channel type result=40 03:28:50 Set A/D encoding result=40 03:28:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:50 Set channel filter=0.000000e+000 result=40 03:28:50 Config A/D Result=40 03:28:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:50 Get A/D filter: -9.255963e+061 result=40 03:28:50 Get A/D value=-858993460 result=40 03:28:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:50 Aux= 03:28:50 Message to Camera, serial 74493 queued 03:29:27 Received message from Master: op=PointingHead serial=74506 03:29:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:29:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:29:27 Point started: ret=0 03:29:27 point_skyscan result=0 03:29:28 Check angles 03:29:28 SkyScan query 03:29:29 SkyScan query done: ret=0 az=153.21<-10214 ze=6.51<-11566 Statuses=0009 0008 03:29:29 Msec=0 True Az=153.21 Ze=6.51 Az status=0009 Ze status=0008 03:29:29 Check angles 03:29:29 SkyScan query 03:29:30 SkyScan query done: ret=0 az=135.735<-9049 ze=6.495<-11567 Statuses=0009 0008 03:29:30 Msec=750 True Az=135.735 Ze=6.495 Az status=0009 Ze status=0008 03:29:30 Check angles 03:29:30 SkyScan query 03:29:30 SkyScan query done: ret=0 az=118.26<-7884 ze=6.495<-11567 Statuses=0009 0008 03:29:30 Msec=1500 True Az=118.26 Ze=6.495 Az status=0009 Ze status=0008 03:29:30 Check angles 03:29:30 SkyScan query 03:29:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:29:31 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:29:31 Message to Master queued w/err=0: serial=74506 error=0 03:29:36 Received message from Master: op=Filter serial=74507 03:29:36 Color wheel filter change from 0 to 0 03:29:36 FLIGetFilterPos err=0 currentPosition=0 03:29:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:36 Filter is already there-color wheel unchanged 03:29:36 Received message from Master: op=Shutter serial=74508 03:29:36 Shutter LASER close 03:29:36 Received message from Camera: op=State serial=74510 03:29:36 GetSingleValue result=40 Value=cccccccc 03:29:36 SkyScan query 03:29:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:29:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:37 Parameters OK 03:29:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:37 Set A/D data flow result=40 03:29:37 Set A/D channel type result=40 03:29:37 Set A/D encoding result=40 03:29:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:37 Set channel filter=0.000000e+000 result=40 03:29:37 Config A/D Result=40 03:29:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:37 Get A/D filter: -9.255963e+061 result=40 03:29:37 Get A/D value=-858993460 result=40 03:29:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:37 Parameters OK 03:29:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:37 Set A/D data flow result=40 03:29:37 Set A/D channel type result=40 03:29:37 Set A/D encoding result=40 03:29:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:37 Set channel filter=0.000000e+000 result=40 03:29:37 Config A/D Result=40 03:29:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:37 Get A/D filter: -9.255963e+061 result=40 03:29:37 Get A/D value=-858993460 result=40 03:29:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:37 Aux= 03:29:37 Message to Camera, serial 74510 queued 03:30:14 Received message from Master: op=PointingHead serial=74523 03:30:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:30:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:30:14 Point started: ret=0 03:30:14 point_skyscan result=0 03:30:15 Check angles 03:30:15 SkyScan query 03:30:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 03:30:15 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 03:30:16 Check angles 03:30:16 SkyScan query 03:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 03:30:16 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 03:30:16 Check angles 03:30:16 SkyScan query 03:30:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.685<-16379 Statuses=0008 0009 03:30:17 Msec=1500 True Az=112.995 Ze=-65.685 Az status=0008 Ze status=0009 03:30:17 Check angles 03:30:17 SkyScan query 03:30:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 03:30:18 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 03:30:18 Check angles 03:30:18 SkyScan query 03:30:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.03<-19202 Statuses=0008 0009 03:30:18 Msec=3000 True Az=112.995 Ze=-108.03 Az status=0008 Ze status=0009 03:30:19 Check angles 03:30:19 SkyScan query 03:30:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.97<-20598 Statuses=0008 0009 03:30:19 Msec=3750 True Az=112.995 Ze=-128.97 Az status=0008 Ze status=0009 03:30:19 Check angles 03:30:19 SkyScan query 03:30:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 03:30:20 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 03:30:20 Check angles 03:30:20 SkyScan query 03:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0008 0009 03:30:21 Msec=5250 True Az=112.995 Ze=-171.465 Az status=0008 Ze status=0009 03:30:21 Check angles 03:30:21 SkyScan query 03:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:30:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:30:21 Message to Master queued w/err=0: serial=74523 error=0 03:30:26 Received message from Master: op=Filter serial=74524 03:30:26 Color wheel filter change from 0 to 0 03:30:26 FLIGetFilterPos err=0 currentPosition=0 03:30:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:26 Filter is already there-color wheel unchanged 03:30:27 Received message from Master: op=Shutter serial=74525 03:30:27 Shutter LASER open 03:30:27 Received message from Camera: op=State serial=74527 03:30:27 GetSingleValue result=40 Value=cccccccc 03:30:27 SkyScan query 03:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:30:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:27 Parameters OK 03:30:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:27 Set A/D data flow result=40 03:30:27 Set A/D channel type result=40 03:30:27 Set A/D encoding result=40 03:30:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:27 Set channel filter=0.000000e+000 result=40 03:30:27 Config A/D Result=40 03:30:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:27 Get A/D filter: -9.255963e+061 result=40 03:30:27 Get A/D value=-858993460 result=40 03:30:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:27 Parameters OK 03:30:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:27 Set A/D data flow result=40 03:30:27 Set A/D channel type result=40 03:30:27 Set A/D encoding result=40 03:30:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:27 Set channel filter=0.000000e+000 result=40 03:30:27 Config A/D Result=40 03:30:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:27 Get A/D filter: -9.255963e+061 result=40 03:30:27 Get A/D value=-858993460 result=40 03:30:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:27 Aux= 03:30:27 Message to Camera, serial 74527 queued 03:30:36 Received message from Master: op=Shutter serial=74537 03:30:36 Shutter LASER close 03:30:36 Received message from Master: op=PointingHead serial=74541 03:30:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:30:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:30:37 Point started: ret=0 03:30:37 point_skyscan result=0 03:30:37 Check angles 03:30:37 SkyScan query 03:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 03:30:38 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 03:30:38 Check angles 03:30:38 SkyScan query 03:30:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 03:30:39 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 03:30:39 Check angles 03:30:39 SkyScan query 03:30:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 03:30:39 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 03:30:40 Check angles 03:30:40 SkyScan query 03:30:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 03:30:40 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 03:30:40 Check angles 03:30:40 SkyScan query 03:30:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.695<-15913 Statuses=0008 0009 03:30:41 Msec=3000 True Az=112.995 Ze=-58.695 Az status=0008 Ze status=0009 03:30:41 Check angles 03:30:41 SkyScan query 03:30:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 03:30:42 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 03:30:42 Check angles 03:30:42 SkyScan query 03:30:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.335<-13089 Statuses=0008 0009 03:30:42 Msec=4500 True Az=112.995 Ze=-16.335 Az status=0008 Ze status=0009 03:30:43 Check angles 03:30:43 SkyScan query 03:30:43 SkyScan query done: ret=0 az=112.995<-7533 ze=4.83<-11678 Statuses=0008 0009 03:30:43 Msec=5250 True Az=112.995 Ze=4.83 Az status=0008 Ze status=0009 03:30:43 Check angles 03:30:43 SkyScan query 03:30:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:30:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:30:44 Message to Master queued w/err=0: serial=74541 error=0 03:30:49 Received message from Master: op=Filter serial=74542 03:30:49 Color wheel filter change from 0 to 0 03:30:49 FLIGetFilterPos err=0 currentPosition=0 03:30:49 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:49 Filter is already there-color wheel unchanged 03:30:49 Received message from Master: op=Shutter serial=74543 03:30:49 Shutter LASER close 03:30:49 Received message from Camera: op=State serial=74545 03:30:49 GetSingleValue result=40 Value=cccccccc 03:30:49 SkyScan query 03:30:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:30:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:50 Parameters OK 03:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:50 Set A/D data flow result=40 03:30:50 Set A/D channel type result=40 03:30:50 Set A/D encoding result=40 03:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:50 Set channel filter=0.000000e+000 result=40 03:30:50 Config A/D Result=40 03:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:50 Get A/D filter: -9.255963e+061 result=40 03:30:50 Get A/D value=-858993460 result=40 03:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:50 Parameters OK 03:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:50 Set A/D data flow result=40 03:30:50 Set A/D channel type result=40 03:30:50 Set A/D encoding result=40 03:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:50 Set channel filter=0.000000e+000 result=40 03:30:50 Config A/D Result=40 03:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:50 Get A/D filter: -9.255963e+061 result=40 03:30:50 Get A/D value=-858993460 result=40 03:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:50 Aux= 03:30:50 Message to Camera, serial 74545 queued 03:31:27 Received message from Master: op=PointingHead serial=74558 03:31:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:31:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:31:27 Point started: ret=0 03:31:27 point_skyscan result=0 03:31:28 Check angles 03:31:28 SkyScan query 03:31:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:31:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:31:28 Message to Master queued w/err=0: serial=74558 error=0 03:31:33 Received message from Master: op=Filter serial=74559 03:31:33 Color wheel filter change from 0 to 0 03:31:33 FLIGetFilterPos err=0 currentPosition=0 03:31:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:33 Filter is already there-color wheel unchanged 03:31:34 Received message from Master: op=Shutter serial=74560 03:31:34 Shutter LASER close 03:31:34 Received message from Camera: op=State serial=74562 03:31:34 GetSingleValue result=40 Value=cccccccc 03:31:34 SkyScan query 03:31:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:31:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:34 Parameters OK 03:31:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:34 Set A/D data flow result=40 03:31:34 Set A/D channel type result=40 03:31:34 Set A/D encoding result=40 03:31:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:34 Set channel filter=0.000000e+000 result=40 03:31:34 Config A/D Result=40 03:31:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:34 Get A/D filter: -9.255963e+061 result=40 03:31:34 Get A/D value=-858993460 result=40 03:31:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:34 Parameters OK 03:31:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:34 Set A/D data flow result=40 03:31:34 Set A/D channel type result=40 03:31:34 Set A/D encoding result=40 03:31:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:34 Set channel filter=0.000000e+000 result=40 03:31:34 Config A/D Result=40 03:31:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:34 Get A/D filter: -9.255963e+061 result=40 03:31:34 Get A/D value=-858993460 result=40 03:31:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:34 Aux= 03:31:34 Message to Camera, serial 74562 queued 03:32:11 Received message from Master: op=PointingHead serial=74575 03:32:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:32:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:32:11 Point started: ret=0 03:32:11 point_skyscan result=0 03:32:12 Check angles 03:32:12 SkyScan query 03:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:32:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:32:13 Message to Master queued w/err=0: serial=74575 error=0 03:32:18 Received message from Master: op=Filter serial=74576 03:32:18 Color wheel filter change from 0 to 0 03:32:18 FLIGetFilterPos err=0 currentPosition=0 03:32:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:18 Filter is already there-color wheel unchanged 03:32:18 Received message from Master: op=Shutter serial=74577 03:32:18 Shutter LASER close 03:32:18 Received message from Camera: op=State serial=74579 03:32:18 GetSingleValue result=40 Value=cccccccc 03:32:18 SkyScan query 03:32:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:32:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:18 Parameters OK 03:32:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:18 Set A/D data flow result=40 03:32:18 Set A/D channel type result=40 03:32:18 Set A/D encoding result=40 03:32:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:18 Set channel filter=0.000000e+000 result=40 03:32:18 Config A/D Result=40 03:32:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:18 Get A/D filter: -9.255963e+061 result=40 03:32:18 Get A/D value=-858993460 result=40 03:32:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:18 Parameters OK 03:32:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:18 Set A/D data flow result=40 03:32:18 Set A/D channel type result=40 03:32:18 Set A/D encoding result=40 03:32:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:18 Set channel filter=0.000000e+000 result=40 03:32:18 Config A/D Result=40 03:32:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:18 Get A/D filter: -9.255963e+061 result=40 03:32:18 Get A/D value=-858993460 result=40 03:32:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:18 Aux= 03:32:18 Message to Camera, serial 74579 queued 03:32:54 Received message from Master: op=PointingHead serial=74591 03:32:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:32:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:32:55 Point started: ret=0 03:32:55 point_skyscan result=0 03:32:55 Check angles 03:32:55 SkyScan query 03:32:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:32:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:32:56 Message to Master queued w/err=0: serial=74591 error=0 03:33:01 Received message from Master: op=Filter serial=74592 03:33:01 Color wheel filter change from 0 to 0 03:33:01 FLIGetFilterPos err=0 currentPosition=0 03:33:01 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:01 Filter is already there-color wheel unchanged 03:33:01 Received message from Master: op=Shutter serial=74593 03:33:01 Shutter LASER close 03:33:01 Received message from Camera: op=State serial=74595 03:33:01 GetSingleValue result=40 Value=cccccccc 03:33:01 SkyScan query 03:33:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:33:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:02 Parameters OK 03:33:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:02 Set A/D data flow result=40 03:33:02 Set A/D channel type result=40 03:33:02 Set A/D encoding result=40 03:33:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:02 Set channel filter=0.000000e+000 result=40 03:33:02 Config A/D Result=40 03:33:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:02 Get A/D filter: -9.255963e+061 result=40 03:33:02 Get A/D value=-858993460 result=40 03:33:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:02 Parameters OK 03:33:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:02 Set A/D data flow result=40 03:33:02 Set A/D channel type result=40 03:33:02 Set A/D encoding result=40 03:33:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:02 Set channel filter=0.000000e+000 result=40 03:33:02 Config A/D Result=40 03:33:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:02 Get A/D filter: -9.255963e+061 result=40 03:33:02 Get A/D value=-858993460 result=40 03:33:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:02 Aux= 03:33:02 Message to Camera, serial 74595 queued 03:33:38 Received message from Master: op=Identify serial=74604 03:33:39 Received message from Master: op=PointingHead serial=74611 03:33:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:33:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:33:39 Point started: ret=0 03:33:39 point_skyscan result=0 03:33:40 Check angles 03:33:40 SkyScan query 03:33:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 03:33:40 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 03:33:40 Check angles 03:33:40 SkyScan query 03:33:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 03:33:41 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 03:33:41 Check angles 03:33:41 SkyScan query 03:33:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 03:33:42 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 03:33:42 Check angles 03:33:42 SkyScan query 03:33:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 03:33:43 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 03:33:43 Check angles 03:33:43 SkyScan query 03:33:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 03:33:43 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 03:33:43 Check angles 03:33:43 SkyScan query 03:33:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 03:33:44 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 03:33:44 Check angles 03:33:44 SkyScan query 03:33:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.535<-21969 Statuses=0008 0009 03:33:45 Msec=4500 True Az=112.995 Ze=-149.535 Az status=0008 Ze status=0009 03:33:45 Check angles 03:33:45 SkyScan query 03:33:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.475<-23365 Statuses=0008 0009 03:33:46 Msec=5250 True Az=112.995 Ze=-170.475 Az status=0008 Ze status=0009 03:33:46 Check angles 03:33:46 SkyScan query 03:33:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:33:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:33:46 Message to Master queued w/err=0: serial=74611 error=0 03:33:51 Received message from Master: op=Filter serial=74612 03:33:51 Color wheel filter change from 0 to 0 03:33:51 FLIGetFilterPos err=0 currentPosition=0 03:33:51 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:51 Filter is already there-color wheel unchanged 03:33:52 Received message from Master: op=Shutter serial=74613 03:33:52 Shutter LASER open 03:33:52 Received message from Camera: op=State serial=74615 03:33:52 GetSingleValue result=40 Value=cccccccc 03:33:52 SkyScan query 03:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:33:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:52 Parameters OK 03:33:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:52 Set A/D data flow result=40 03:33:52 Set A/D channel type result=40 03:33:52 Set A/D encoding result=40 03:33:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:52 Set channel filter=0.000000e+000 result=40 03:33:52 Config A/D Result=40 03:33:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:52 Get A/D filter: -9.255963e+061 result=40 03:33:52 Get A/D value=-858993460 result=40 03:33:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:52 Parameters OK 03:33:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:52 Set A/D data flow result=40 03:33:52 Set A/D channel type result=40 03:33:52 Set A/D encoding result=40 03:33:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:52 Set channel filter=0.000000e+000 result=40 03:33:52 Config A/D Result=40 03:33:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:52 Get A/D filter: -9.255963e+061 result=40 03:33:52 Get A/D value=-858993460 result=40 03:33:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:52 Aux= 03:33:52 Message to Camera, serial 74615 queued 03:34:01 Received message from Master: op=Shutter serial=74625 03:34:01 Shutter LASER close 03:34:01 Received message from Master: op=PointingHead serial=74629 03:34:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:34:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:34:02 Point started: ret=0 03:34:02 point_skyscan result=0 03:34:03 Check angles 03:34:03 SkyScan query 03:34:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 03:34:03 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 03:34:03 Check angles 03:34:03 SkyScan query 03:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.31<-20154 Statuses=0008 0009 03:34:04 Msec=750 True Az=112.995 Ze=-122.31 Az status=0008 Ze status=0009 03:34:04 Check angles 03:34:04 SkyScan query 03:34:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 03:34:05 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 03:34:05 Check angles 03:34:05 SkyScan query 03:34:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.4<-17360 Statuses=0008 0009 03:34:05 Msec=2250 True Az=112.995 Ze=-80.4 Az status=0008 Ze status=0009 03:34:06 Check angles 03:34:06 SkyScan query 03:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.46<-15964 Statuses=0008 0009 03:34:06 Msec=3000 True Az=112.995 Ze=-59.46 Az status=0008 Ze status=0009 03:34:06 Check angles 03:34:06 SkyScan query 03:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.475<-14565 Statuses=0008 0009 03:34:07 Msec=3750 True Az=112.995 Ze=-38.475 Az status=0008 Ze status=0009 03:34:07 Check angles 03:34:07 SkyScan query 03:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 03:34:08 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 03:34:08 Check angles 03:34:08 SkyScan query 03:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 03:34:08 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 03:34:09 Check angles 03:34:09 SkyScan query 03:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:34:09 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:34:09 Message to Master queued w/err=0: serial=74629 error=0 03:34:14 Received message from Master: op=Filter serial=74630 03:34:14 Color wheel filter change from 0 to 0 03:34:14 FLIGetFilterPos err=0 currentPosition=0 03:34:14 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:14 Filter is already there-color wheel unchanged 03:34:14 Received message from Master: op=Shutter serial=74631 03:34:14 Shutter LASER close 03:34:14 Received message from Camera: op=State serial=74633 03:34:14 GetSingleValue result=40 Value=cccccccc 03:34:14 SkyScan query 03:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 [UTC 2019-3-3 03:34:15] 03:34:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:15 Parameters OK 03:34:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:15 Set A/D data flow result=40 03:34:15 Set A/D channel type result=40 03:34:15 Set A/D encoding result=40 03:34:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:15 Set channel filter=0.000000e+000 result=40 03:34:15 Config A/D Result=40 03:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:15 Get A/D filter: -9.255963e+061 result=40 03:34:15 Get A/D value=-858993460 result=40 03:34:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:15 Parameters OK 03:34:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:15 Set A/D data flow result=40 03:34:15 Set A/D channel type result=40 03:34:15 Set A/D encoding result=40 03:34:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:15 Set channel filter=0.000000e+000 result=40 03:34:15 Config A/D Result=40 03:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:15 Get A/D filter: -9.255963e+061 result=40 03:34:15 Get A/D value=-858993460 result=40 03:34:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:15 Aux= 03:34:15 Message to Camera, serial 74633 queued 03:34:52 Received message from Master: op=PointingHead serial=74646 03:34:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:34:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:34:52 Point started: ret=0 03:34:52 point_skyscan result=0 03:34:53 Check angles 03:34:53 SkyScan query 03:34:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:34:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:34:54 Message to Master queued w/err=0: serial=74646 error=0 03:34:59 Received message from Master: op=Filter serial=74647 03:34:59 Color wheel filter change from 0 to 0 03:34:59 FLIGetFilterPos err=0 currentPosition=0 03:34:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:59 Filter is already there-color wheel unchanged 03:34:59 Received message from Master: op=Shutter serial=74648 03:34:59 Shutter LASER close 03:34:59 Received message from Camera: op=State serial=74650 03:34:59 GetSingleValue result=40 Value=cccccccc 03:34:59 SkyScan query 03:34:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:34:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:59 Parameters OK 03:34:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:59 Set A/D data flow result=40 03:34:59 Set A/D channel type result=40 03:34:59 Set A/D encoding result=40 03:34:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:59 Set channel filter=0.000000e+000 result=40 03:34:59 Config A/D Result=40 03:34:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:59 Get A/D filter: -9.255963e+061 result=40 03:34:59 Get A/D value=-858993460 result=40 03:34:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:59 Parameters OK 03:34:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:59 Set A/D data flow result=40 03:34:59 Set A/D channel type result=40 03:34:59 Set A/D encoding result=40 03:34:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:59 Set channel filter=0.000000e+000 result=40 03:34:59 Config A/D Result=40 03:34:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:59 Get A/D filter: -9.255963e+061 result=40 03:34:59 Get A/D value=-858993460 result=40 03:34:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:59 Aux= 03:34:59 Message to Camera, serial 74650 queued 03:35:36 Received message from Master: op=PointingHead serial=74663 03:35:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:35:36 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:35:37 Point started: ret=0 03:35:37 point_skyscan result=0 03:35:37 Check angles 03:35:37 SkyScan query 03:35:38 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.495<-12433 Statuses=0009 0008 03:35:38 Msec=0 True Az=136.11 Ze=-6.495 Az status=0009 Ze status=0008 03:35:38 Check angles 03:35:38 SkyScan query 03:35:39 SkyScan query done: ret=0 az=154.05<-10270 ze=-6.48<-12432 Statuses=0009 0008 03:35:39 Msec=750 True Az=154.05 Ze=-6.48 Az status=0009 Ze status=0008 03:35:39 Check angles 03:35:39 SkyScan query 03:35:39 SkyScan query done: ret=0 az=171.45<-11430 ze=-6.48<-12432 Statuses=0009 0008 03:35:39 Msec=1500 True Az=171.45 Ze=-6.48 Az status=0009 Ze status=0008 03:35:40 Check angles 03:35:40 SkyScan query 03:35:40 SkyScan query done: ret=0 az=175.98<-11732 ze=-6.48<-12432 Statuses=0008 0008 03:35:40 Msec=2250 True Az=175.98 Ze=-6.48 Az status=0008 Ze status=0008 03:35:40 Message to Master queued w/err=0: serial=74663 error=0 03:35:45 Received message from Master: op=Filter serial=74664 03:35:45 Color wheel filter change from 0 to 0 03:35:45 FLIGetFilterPos err=0 currentPosition=0 03:35:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:35:45 Filter is already there-color wheel unchanged 03:35:45 Received message from Master: op=Shutter serial=74665 03:35:45 Shutter LASER close 03:35:45 Received message from Camera: op=State serial=74667 03:35:45 GetSingleValue result=40 Value=cccccccc 03:35:45 SkyScan query 03:35:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:35:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:46 Parameters OK 03:35:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:46 Set A/D data flow result=40 03:35:46 Set A/D channel type result=40 03:35:46 Set A/D encoding result=40 03:35:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:46 Set channel filter=0.000000e+000 result=40 03:35:46 Config A/D Result=40 03:35:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:46 Get A/D filter: -9.255963e+061 result=40 03:35:46 Get A/D value=-858993460 result=40 03:35:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:46 Parameters OK 03:35:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:46 Set A/D data flow result=40 03:35:46 Set A/D channel type result=40 03:35:46 Set A/D encoding result=40 03:35:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:46 Set channel filter=0.000000e+000 result=40 03:35:46 Config A/D Result=40 03:35:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:46 Get A/D filter: -9.255963e+061 result=40 03:35:46 Get A/D value=-858993460 result=40 03:35:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:35:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:35:46 Aux= 03:35:46 Message to Camera, serial 74667 queued 03:36:23 Received message from Master: op=PointingHead serial=74680 03:36:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:36:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:36:23 Point started: ret=0 03:36:23 point_skyscan result=0 03:36:24 Check angles 03:36:24 SkyScan query 03:36:24 SkyScan query done: ret=0 az=153.285<-10219 ze=6.51<-11566 Statuses=0009 0008 03:36:24 Msec=0 True Az=153.285 Ze=6.51 Az status=0009 Ze status=0008 03:36:25 Check angles 03:36:25 SkyScan query 03:36:25 SkyScan query done: ret=0 az=135.39<-9026 ze=6.495<-11567 Statuses=0009 0008 03:36:25 Msec=750 True Az=135.39 Ze=6.495 Az status=0009 Ze status=0008 03:36:25 Check angles 03:36:25 SkyScan query 03:36:26 SkyScan query done: ret=0 az=117.585<-7839 ze=6.495<-11567 Statuses=0009 0008 03:36:26 Msec=1500 True Az=117.585 Ze=6.495 Az status=0009 Ze status=0008 03:36:26 Check angles 03:36:26 SkyScan query 03:36:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:36:27 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:36:27 Message to Master queued w/err=0: serial=74680 error=0 03:36:32 Received message from Master: op=Filter serial=74681 03:36:32 Color wheel filter change from 0 to 0 03:36:32 FLIGetFilterPos err=0 currentPosition=0 03:36:32 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:32 Filter is already there-color wheel unchanged 03:36:32 Received message from Master: op=Shutter serial=74682 03:36:32 Shutter LASER close 03:36:32 Received message from Camera: op=State serial=74684 03:36:32 GetSingleValue result=40 Value=cccccccc 03:36:32 SkyScan query 03:36:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:36:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:32 Parameters OK 03:36:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:32 Set A/D data flow result=40 03:36:32 Set A/D channel type result=40 03:36:32 Set A/D encoding result=40 03:36:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:32 Set channel filter=0.000000e+000 result=40 03:36:32 Config A/D Result=40 03:36:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:32 Get A/D filter: -9.255963e+061 result=40 03:36:32 Get A/D value=-858993460 result=40 03:36:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:32 Parameters OK 03:36:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:32 Set A/D data flow result=40 03:36:32 Set A/D channel type result=40 03:36:32 Set A/D encoding result=40 03:36:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:32 Set channel filter=0.000000e+000 result=40 03:36:32 Config A/D Result=40 03:36:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:32 Get A/D filter: -9.255963e+061 result=40 03:36:32 Get A/D value=-858993460 result=40 03:36:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:32 Aux= 03:36:32 Message to Camera, serial 74684 queued 03:37:09 Received message from Master: op=PointingHead serial=74697 03:37:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:37:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:37:10 Point started: ret=0 03:37:10 point_skyscan result=0 03:37:10 Check angles 03:37:10 SkyScan query 03:37:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 03:37:11 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 03:37:11 Check angles 03:37:11 SkyScan query 03:37:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 03:37:12 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 03:37:12 Check angles 03:37:12 SkyScan query 03:37:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 03:37:12 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 03:37:13 Check angles 03:37:13 SkyScan query 03:37:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.92<-17728 Statuses=0008 0009 03:37:13 Msec=2250 True Az=112.995 Ze=-85.92 Az status=0008 Ze status=0009 03:37:13 Check angles 03:37:13 SkyScan query 03:37:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.845<-19123 Statuses=0008 0009 03:37:14 Msec=3000 True Az=112.995 Ze=-106.845 Az status=0008 Ze status=0009 03:37:14 Check angles 03:37:14 SkyScan query 03:37:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.815<-20521 Statuses=0008 0009 03:37:15 Msec=3750 True Az=112.995 Ze=-127.815 Az status=0008 Ze status=0009 03:37:15 Check angles 03:37:15 SkyScan query 03:37:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.755<-21917 Statuses=0008 0009 03:37:15 Msec=4500 True Az=112.995 Ze=-148.755 Az status=0008 Ze status=0009 03:37:16 Check angles 03:37:16 SkyScan query 03:37:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.71<-23314 Statuses=0008 0009 03:37:16 Msec=5250 True Az=112.995 Ze=-169.71 Az status=0008 Ze status=0009 03:37:16 Check angles 03:37:16 SkyScan query 03:37:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:37:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:37:17 Message to Master queued w/err=0: serial=74697 error=0 03:37:22 Received message from Master: op=Filter serial=74698 03:37:22 Color wheel filter change from 0 to 0 03:37:22 FLIGetFilterPos err=0 currentPosition=0 03:37:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:22 Filter is already there-color wheel unchanged 03:37:22 Received message from Master: op=Shutter serial=74699 03:37:22 Shutter LASER open 03:37:22 Received message from Camera: op=State serial=74701 03:37:22 GetSingleValue result=40 Value=cccccccc 03:37:22 SkyScan query 03:37:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:37:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:23 Parameters OK 03:37:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:23 Set A/D data flow result=40 03:37:23 Set A/D channel type result=40 03:37:23 Set A/D encoding result=40 03:37:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:23 Set channel filter=0.000000e+000 result=40 03:37:23 Config A/D Result=40 03:37:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:23 Get A/D filter: -9.255963e+061 result=40 03:37:23 Get A/D value=-858993460 result=40 03:37:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:23 Parameters OK 03:37:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:23 Set A/D data flow result=40 03:37:23 Set A/D channel type result=40 03:37:23 Set A/D encoding result=40 03:37:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:23 Set channel filter=0.000000e+000 result=40 03:37:23 Config A/D Result=40 03:37:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:23 Get A/D filter: -9.255963e+061 result=40 03:37:23 Get A/D value=-858993460 result=40 03:37:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:23 Aux= 03:37:23 Message to Camera, serial 74701 queued 03:37:31 Received message from Master: op=Shutter serial=74711 03:37:31 Shutter LASER close 03:37:32 Received message from Master: op=PointingHead serial=74715 03:37:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:37:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:37:32 Point started: ret=0 03:37:32 point_skyscan result=0 03:37:33 Check angles 03:37:33 SkyScan query 03:37:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 03:37:33 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 03:37:34 Check angles 03:37:34 SkyScan query 03:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.71<-20114 Statuses=0008 0009 03:37:34 Msec=750 True Az=112.995 Ze=-121.71 Az status=0008 Ze status=0009 03:37:34 Check angles 03:37:34 SkyScan query 03:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 03:37:35 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 03:37:35 Check angles 03:37:35 SkyScan query 03:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.365<-17291 Statuses=0008 0009 03:37:36 Msec=2250 True Az=112.995 Ze=-79.365 Az status=0008 Ze status=0009 03:37:36 Check angles 03:37:36 SkyScan query 03:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.41<-15894 Statuses=0008 0009 03:37:36 Msec=3000 True Az=112.995 Ze=-58.41 Az status=0008 Ze status=0009 03:37:37 Check angles 03:37:37 SkyScan query 03:37:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.485<-14499 Statuses=0008 0009 03:37:37 Msec=3750 True Az=112.995 Ze=-37.485 Az status=0008 Ze status=0009 03:37:37 Check angles 03:37:37 SkyScan query 03:37:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.065<-13071 Statuses=0008 0009 03:37:38 Msec=4500 True Az=112.995 Ze=-16.065 Az status=0008 Ze status=0009 03:37:38 Check angles 03:37:38 SkyScan query 03:37:39 SkyScan query done: ret=0 az=112.995<-7533 ze=4.71<-11686 Statuses=0008 0009 03:37:39 Msec=5250 True Az=112.995 Ze=4.71 Az status=0008 Ze status=0009 03:37:39 Check angles 03:37:39 SkyScan query 03:37:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:37:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:37:39 Message to Master queued w/err=0: serial=74715 error=0 03:37:44 Received message from Master: op=Filter serial=74716 03:37:44 Color wheel filter change from 0 to 0 03:37:44 FLIGetFilterPos err=0 currentPosition=0 03:37:44 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:44 Filter is already there-color wheel unchanged 03:37:45 Received message from Master: op=Shutter serial=74717 03:37:45 Shutter LASER close 03:37:45 Received message from Camera: op=State serial=74719 03:37:45 GetSingleValue result=40 Value=cccccccc 03:37:45 SkyScan query 03:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:37:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:45 Parameters OK 03:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:45 Set A/D data flow result=40 03:37:45 Set A/D channel type result=40 03:37:45 Set A/D encoding result=40 03:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:45 Set channel filter=0.000000e+000 result=40 03:37:45 Config A/D Result=40 03:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:45 Get A/D filter: -9.255963e+061 result=40 03:37:45 Get A/D value=-858993460 result=40 03:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:45 Parameters OK 03:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:45 Set A/D data flow result=40 03:37:45 Set A/D channel type result=40 03:37:45 Set A/D encoding result=40 03:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:45 Set channel filter=0.000000e+000 result=40 03:37:45 Config A/D Result=40 03:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:45 Get A/D filter: -9.255963e+061 result=40 03:37:45 Get A/D value=-858993460 result=40 03:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:45 Aux= 03:37:45 Message to Camera, serial 74719 queued 03:38:22 Received message from Master: op=PointingHead serial=74732 03:38:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:38:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:38:23 Point started: ret=0 03:38:23 point_skyscan result=0 03:38:23 Check angles 03:38:23 SkyScan query 03:38:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:38:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:38:24 Message to Master queued w/err=0: serial=74732 error=0 03:38:29 Received message from Master: op=Filter serial=74733 03:38:29 Color wheel filter change from 0 to 0 03:38:29 FLIGetFilterPos err=0 currentPosition=0 03:38:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:29 Filter is already there-color wheel unchanged 03:38:29 Received message from Master: op=Shutter serial=74734 03:38:29 Shutter LASER close 03:38:29 Received message from Camera: op=State serial=74736 03:38:29 GetSingleValue result=40 Value=cccccccc 03:38:29 SkyScan query 03:38:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:38:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:30 Parameters OK 03:38:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:30 Set A/D data flow result=40 03:38:30 Set A/D channel type result=40 03:38:30 Set A/D encoding result=40 03:38:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:30 Set channel filter=0.000000e+000 result=40 03:38:30 Config A/D Result=40 03:38:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:30 Get A/D filter: -9.255963e+061 result=40 03:38:30 Get A/D value=-858993460 result=40 03:38:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:30 Parameters OK 03:38:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:30 Set A/D data flow result=40 03:38:30 Set A/D channel type result=40 03:38:30 Set A/D encoding result=40 03:38:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:30 Set channel filter=0.000000e+000 result=40 03:38:30 Config A/D Result=40 03:38:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:30 Get A/D filter: -9.255963e+061 result=40 03:38:30 Get A/D value=-858993460 result=40 03:38:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:30 Aux= 03:38:30 Message to Camera, serial 74736 queued 03:39:07 Received message from Master: op=PointingHead serial=74749 03:39:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:39:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:39:07 Point started: ret=0 03:39:07 point_skyscan result=0 03:39:08 Check angles 03:39:08 SkyScan query 03:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:39:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:39:08 Message to Master queued w/err=0: serial=74749 error=0 03:39:13 Received message from Master: op=Filter serial=74750 03:39:13 Color wheel filter change from 0 to 0 03:39:13 FLIGetFilterPos err=0 currentPosition=0 03:39:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:13 Filter is already there-color wheel unchanged 03:39:13 Received message from Master: op=Shutter serial=74751 03:39:13 Shutter LASER close 03:39:13 Received message from Camera: op=State serial=74753 03:39:13 GetSingleValue result=40 Value=cccccccc 03:39:13 SkyScan query 03:39:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:39:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:14 Parameters OK 03:39:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:14 Set A/D data flow result=40 03:39:14 Set A/D channel type result=40 03:39:14 Set A/D encoding result=40 03:39:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:14 Set channel filter=0.000000e+000 result=40 03:39:14 Config A/D Result=40 03:39:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:14 Get A/D filter: -9.255963e+061 result=40 03:39:14 Get A/D value=-858993460 result=40 03:39:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:14 Parameters OK 03:39:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:14 Set A/D data flow result=40 03:39:14 Set A/D channel type result=40 03:39:14 Set A/D encoding result=40 03:39:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:14 Set channel filter=0.000000e+000 result=40 03:39:14 Config A/D Result=40 03:39:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:14 Get A/D filter: -9.255963e+061 result=40 03:39:14 Get A/D value=-858993460 result=40 03:39:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:14 Aux= 03:39:14 Message to Camera, serial 74753 queued 03:39:51 Received message from Master: op=PointingHead serial=74766 03:39:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:39:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:39:51 Point started: ret=0 03:39:51 point_skyscan result=0 03:39:52 Check angles 03:39:52 SkyScan query 03:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:39:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:39:53 Message to Master queued w/err=0: serial=74766 error=0 03:39:58 Received message from Master: op=Filter serial=74767 03:39:58 Color wheel filter change from 0 to 0 03:39:58 FLIGetFilterPos err=0 currentPosition=0 03:39:58 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:58 Filter is already there-color wheel unchanged 03:39:58 Received message from Master: op=Shutter serial=74768 03:39:58 Shutter LASER close 03:39:58 Received message from Camera: op=State serial=74770 03:39:58 GetSingleValue result=40 Value=cccccccc 03:39:58 SkyScan query 03:39:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:39:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:58 Parameters OK 03:39:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:58 Set A/D data flow result=40 03:39:58 Set A/D channel type result=40 03:39:58 Set A/D encoding result=40 03:39:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:58 Set channel filter=0.000000e+000 result=40 03:39:58 Config A/D Result=40 03:39:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:58 Get A/D filter: -9.255963e+061 result=40 03:39:58 Get A/D value=-858993460 result=40 03:39:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:58 Parameters OK 03:39:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:58 Set A/D data flow result=40 03:39:58 Set A/D channel type result=40 03:39:58 Set A/D encoding result=40 03:39:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:58 Set channel filter=0.000000e+000 result=40 03:39:58 Config A/D Result=40 03:39:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:58 Get A/D filter: -9.255963e+061 result=40 03:39:58 Get A/D value=-858993460 result=40 03:39:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:58 Aux= 03:39:58 Message to Camera, serial 74770 queued 03:40:35 Received message from Master: op=PointingHead serial=74783 03:40:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:40:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:40:36 Point started: ret=0 03:40:36 point_skyscan result=0 03:40:36 Check angles 03:40:36 SkyScan query 03:40:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 03:40:37 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 03:40:37 Check angles 03:40:37 SkyScan query 03:40:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.075<-15005 Statuses=0008 0009 03:40:38 Msec=750 True Az=112.995 Ze=-45.075 Az status=0008 Ze status=0009 03:40:38 Check angles 03:40:38 SkyScan query 03:40:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.12<-16408 Statuses=0008 0009 03:40:38 Msec=1500 True Az=112.995 Ze=-66.12 Az status=0008 Ze status=0009 03:40:39 Check angles 03:40:39 SkyScan query 03:40:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.97<-17798 Statuses=0008 0009 03:40:39 Msec=2250 True Az=112.995 Ze=-86.97 Az status=0008 Ze status=0009 03:40:39 Check angles 03:40:39 SkyScan query 03:40:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.925<-19195 Statuses=0008 0009 03:40:40 Msec=3000 True Az=112.995 Ze=-107.925 Az status=0008 Ze status=0009 03:40:40 Check angles 03:40:40 SkyScan query 03:40:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.865<-20591 Statuses=0008 0009 03:40:41 Msec=3750 True Az=112.995 Ze=-128.865 Az status=0008 Ze status=0009 03:40:41 Check angles 03:40:41 SkyScan query 03:40:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.27<-22018 Statuses=0008 0009 03:40:41 Msec=4500 True Az=112.995 Ze=-150.27 Az status=0008 Ze status=0009 03:40:42 Check angles 03:40:42 SkyScan query 03:40:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.075<-23405 Statuses=0008 0009 03:40:42 Msec=5250 True Az=112.995 Ze=-171.075 Az status=0008 Ze status=0009 03:40:42 Check angles 03:40:42 SkyScan query 03:40:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:40:43 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:40:43 Message to Master queued w/err=0: serial=74783 error=0 03:40:48 Received message from Master: op=Filter serial=74784 03:40:48 Color wheel filter change from 0 to 0 03:40:48 FLIGetFilterPos err=0 currentPosition=0 03:40:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:48 Filter is already there-color wheel unchanged 03:40:48 Received message from Master: op=Shutter serial=74785 03:40:48 Shutter LASER open 03:40:48 Received message from Camera: op=State serial=74787 03:40:48 GetSingleValue result=40 Value=cccccccc 03:40:48 SkyScan query 03:40:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:40:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:49 Parameters OK 03:40:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:49 Set A/D data flow result=40 03:40:49 Set A/D channel type result=40 03:40:49 Set A/D encoding result=40 03:40:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:49 Set channel filter=0.000000e+000 result=40 03:40:49 Config A/D Result=40 03:40:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:49 Get A/D filter: -9.255963e+061 result=40 03:40:49 Get A/D value=-858993460 result=40 03:40:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:49 Parameters OK 03:40:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:49 Set A/D data flow result=40 03:40:49 Set A/D channel type result=40 03:40:49 Set A/D encoding result=40 03:40:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:49 Set channel filter=0.000000e+000 result=40 03:40:49 Config A/D Result=40 03:40:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:49 Get A/D filter: -9.255963e+061 result=40 03:40:49 Get A/D value=-858993460 result=40 03:40:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:49 Aux= 03:40:49 Message to Camera, serial 74787 queued 03:40:57 Received message from Master: op=Shutter serial=74797 03:40:57 Shutter LASER close 03:40:58 Received message from Master: op=PointingHead serial=74801 03:40:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:40:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:40:58 Point started: ret=0 03:40:58 point_skyscan result=0 03:40:59 Check angles 03:40:59 SkyScan query 03:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 03:40:59 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 03:41:00 Check angles 03:41:00 SkyScan query 03:41:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 03:41:00 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 03:41:00 Check angles 03:41:00 SkyScan query 03:41:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.41<-18694 Statuses=0008 0009 03:41:01 Msec=1500 True Az=112.995 Ze=-100.41 Az status=0008 Ze status=0009 03:41:01 Check angles 03:41:01 SkyScan query 03:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 03:41:02 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 03:41:02 Check angles 03:41:02 SkyScan query 03:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 03:41:02 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 03:41:03 Check angles 03:41:03 SkyScan query 03:41:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.11<-14474 Statuses=0008 0009 03:41:03 Msec=3750 True Az=112.995 Ze=-37.11 Az status=0008 Ze status=0009 03:41:03 Check angles 03:41:03 SkyScan query 03:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.14<-13076 Statuses=0008 0009 03:41:04 Msec=4500 True Az=112.995 Ze=-16.14 Az status=0008 Ze status=0009 03:41:04 Check angles 03:41:04 SkyScan query 03:41:05 SkyScan query done: ret=0 az=112.995<-7533 ze=4.65<-11690 Statuses=0008 0009 03:41:05 Msec=5250 True Az=112.995 Ze=4.65 Az status=0008 Ze status=0009 03:41:05 Check angles 03:41:05 SkyScan query 03:41:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:41:05 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:41:05 Message to Master queued w/err=0: serial=74801 error=0 03:41:10 Received message from Master: op=Filter serial=74802 03:41:10 Color wheel filter change from 0 to 0 03:41:10 FLIGetFilterPos err=0 currentPosition=0 03:41:10 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:10 Filter is already there-color wheel unchanged 03:41:11 Received message from Master: op=Shutter serial=74803 03:41:11 Shutter LASER close 03:41:11 Received message from Camera: op=State serial=74805 03:41:11 GetSingleValue result=40 Value=cccccccc 03:41:11 SkyScan query 03:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:41:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:11 Parameters OK 03:41:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:11 Set A/D data flow result=40 03:41:11 Set A/D channel type result=40 03:41:11 Set A/D encoding result=40 03:41:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:11 Set channel filter=0.000000e+000 result=40 03:41:11 Config A/D Result=40 03:41:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:11 Get A/D filter: -9.255963e+061 result=40 03:41:11 Get A/D value=-858993460 result=40 03:41:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:11 Parameters OK 03:41:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:11 Set A/D data flow result=40 03:41:11 Set A/D channel type result=40 03:41:11 Set A/D encoding result=40 03:41:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:11 Set channel filter=0.000000e+000 result=40 03:41:11 Config A/D Result=40 03:41:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:11 Get A/D filter: -9.255963e+061 result=40 03:41:11 Get A/D value=-858993460 result=40 03:41:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:11 Aux= 03:41:11 Message to Camera, serial 74805 queued 03:41:48 Received message from Master: op=PointingHead serial=74818 03:41:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:41:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:41:49 Point started: ret=0 03:41:49 point_skyscan result=0 03:41:49 Check angles 03:41:49 SkyScan query 03:41:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:41:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:41:50 Message to Master queued w/err=0: serial=74818 error=0 03:41:55 Received message from Master: op=Filter serial=74819 03:41:55 Color wheel filter change from 0 to 0 03:41:55 FLIGetFilterPos err=0 currentPosition=0 03:41:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:55 Filter is already there-color wheel unchanged 03:41:55 Received message from Master: op=Shutter serial=74820 03:41:55 Shutter LASER close 03:41:55 Received message from Camera: op=State serial=74822 03:41:55 GetSingleValue result=40 Value=cccccccc 03:41:55 SkyScan query 03:41:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:41:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:56 Parameters OK 03:41:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:56 Set A/D data flow result=40 03:41:56 Set A/D channel type result=40 03:41:56 Set A/D encoding result=40 03:41:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:56 Set channel filter=0.000000e+000 result=40 03:41:56 Config A/D Result=40 03:41:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:56 Get A/D filter: -9.255963e+061 result=40 03:41:56 Get A/D value=-858993460 result=40 03:41:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:56 Parameters OK 03:41:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:56 Set A/D data flow result=40 03:41:56 Set A/D channel type result=40 03:41:56 Set A/D encoding result=40 03:41:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:56 Set channel filter=0.000000e+000 result=40 03:41:56 Config A/D Result=40 03:41:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:56 Get A/D filter: -9.255963e+061 result=40 03:41:56 Get A/D value=-858993460 result=40 03:41:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:56 Aux= 03:41:56 Message to Camera, serial 74822 queued 03:42:33 Received message from Master: op=PointingHead serial=74835 03:42:33 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:42:33 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:42:33 Point started: ret=0 03:42:33 point_skyscan result=0 03:42:34 Check angles 03:42:34 SkyScan query 03:42:34 SkyScan query done: ret=0 az=136.29<-9086 ze=-6.495<-12433 Statuses=0009 0008 03:42:34 Msec=0 True Az=136.29 Ze=-6.495 Az status=0009 Ze status=0008 03:42:34 Check angles 03:42:34 SkyScan query 03:42:35 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.48<-12432 Statuses=0009 0008 03:42:35 Msec=750 True Az=153.78 Ze=-6.48 Az status=0009 Ze status=0008 03:42:35 Check angles 03:42:35 SkyScan query 03:42:36 SkyScan query done: ret=0 az=171.225<-11415 ze=-6.48<-12432 Statuses=0009 0008 03:42:36 Msec=1500 True Az=171.225 Ze=-6.48 Az status=0009 Ze status=0008 03:42:36 Check angles 03:42:36 SkyScan query 03:42:36 SkyScan query done: ret=0 az=175.98<-11732 ze=-6.48<-12432 Statuses=0008 0008 03:42:36 Msec=2250 True Az=175.98 Ze=-6.48 Az status=0008 Ze status=0008 03:42:36 Message to Master queued w/err=0: serial=74835 error=0 03:42:41 Received message from Master: op=Filter serial=74836 03:42:41 Color wheel filter change from 0 to 0 03:42:41 FLIGetFilterPos err=0 currentPosition=0 03:42:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:41 Filter is already there-color wheel unchanged 03:42:42 Received message from Master: op=Shutter serial=74837 03:42:42 Shutter LASER close 03:42:42 Received message from Camera: op=State serial=74839 03:42:42 GetSingleValue result=40 Value=cccccccc 03:42:42 SkyScan query 03:42:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:42:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:42 Parameters OK 03:42:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:42 Set A/D data flow result=40 03:42:42 Set A/D channel type result=40 03:42:42 Set A/D encoding result=40 03:42:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:42 Set channel filter=0.000000e+000 result=40 03:42:42 Config A/D Result=40 03:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:42 Get A/D filter: -9.255963e+061 result=40 03:42:42 Get A/D value=-858993460 result=40 03:42:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:42 Parameters OK 03:42:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:42 Set A/D data flow result=40 03:42:42 Set A/D channel type result=40 03:42:42 Set A/D encoding result=40 03:42:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:42 Set channel filter=0.000000e+000 result=40 03:42:42 Config A/D Result=40 03:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:42 Get A/D filter: -9.255963e+061 result=40 03:42:42 Get A/D value=-858993460 result=40 03:42:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:42:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:42:42 Aux= 03:42:42 Message to Camera, serial 74839 queued 03:43:18 Received message from Master: op=PointingHead serial=74851 03:43:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:43:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:43:19 Point started: ret=0 03:43:19 point_skyscan result=0 03:43:19 Check angles 03:43:19 SkyScan query 03:43:20 SkyScan query done: ret=0 az=152.715<-10181 ze=6.51<-11566 Statuses=0009 0008 03:43:20 Msec=0 True Az=152.715 Ze=6.51 Az status=0009 Ze status=0008 03:43:20 Check angles 03:43:20 SkyScan query 03:43:21 SkyScan query done: ret=0 az=134.82<-8988 ze=6.495<-11567 Statuses=0009 0008 03:43:21 Msec=750 True Az=134.82 Ze=6.495 Az status=0009 Ze status=0008 03:43:21 Check angles 03:43:21 SkyScan query 03:43:21 SkyScan query done: ret=0 az=117.345<-7823 ze=6.495<-11567 Statuses=0009 0008 03:43:21 Msec=1500 True Az=117.345 Ze=6.495 Az status=0009 Ze status=0008 03:43:22 Check angles 03:43:22 SkyScan query 03:43:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:43:22 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:43:22 Message to Master queued w/err=0: serial=74851 error=0 03:43:27 Received message from Master: op=Filter serial=74852 03:43:27 Color wheel filter change from 0 to 0 03:43:27 FLIGetFilterPos err=0 currentPosition=0 03:43:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:27 Filter is already there-color wheel unchanged 03:43:27 Received message from Master: op=Shutter serial=74853 03:43:27 Shutter LASER close 03:43:27 Received message from Camera: op=State serial=74855 03:43:27 GetSingleValue result=40 Value=cccccccc 03:43:27 SkyScan query 03:43:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:43:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:28 Parameters OK 03:43:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:28 Set A/D data flow result=40 03:43:28 Set A/D channel type result=40 03:43:28 Set A/D encoding result=40 03:43:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:28 Set channel filter=0.000000e+000 result=40 03:43:28 Config A/D Result=40 03:43:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:28 Get A/D filter: -9.255963e+061 result=40 03:43:28 Get A/D value=-858993460 result=40 03:43:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:28 Parameters OK 03:43:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:28 Set A/D data flow result=40 03:43:28 Set A/D channel type result=40 03:43:28 Set A/D encoding result=40 03:43:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:28 Set channel filter=0.000000e+000 result=40 03:43:28 Config A/D Result=40 03:43:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:28 Get A/D filter: -9.255963e+061 result=40 03:43:28 Get A/D value=-858993460 result=40 03:43:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:28 Aux= 03:43:28 Message to Camera, serial 74855 queued [UTC 2019-3-3 03:43:50] 03:44:05 Received message from Master: op=PointingHead serial=74868 03:44:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:44:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:44:05 Point started: ret=0 03:44:05 point_skyscan result=0 03:44:06 Check angles 03:44:06 SkyScan query 03:44:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 03:44:06 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 03:44:07 Check angles 03:44:07 SkyScan query 03:44:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.965<-14931 Statuses=0008 0009 03:44:07 Msec=750 True Az=112.995 Ze=-43.965 Az status=0008 Ze status=0009 03:44:07 Check angles 03:44:07 SkyScan query 03:44:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 03:44:08 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 03:44:08 Check angles 03:44:08 SkyScan query 03:44:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.31<-17754 Statuses=0008 0009 03:44:09 Msec=2250 True Az=112.995 Ze=-86.31 Az status=0008 Ze status=0009 03:44:09 Check angles 03:44:09 SkyScan query 03:44:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.25<-19150 Statuses=0008 0009 03:44:09 Msec=3000 True Az=112.995 Ze=-107.25 Az status=0008 Ze status=0009 03:44:10 Check angles 03:44:10 SkyScan query 03:44:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.205<-20547 Statuses=0008 0009 03:44:10 Msec=3750 True Az=112.995 Ze=-128.205 Az status=0008 Ze status=0009 03:44:10 Check angles 03:44:10 SkyScan query 03:44:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.175<-21945 Statuses=0008 0009 03:44:11 Msec=4500 True Az=112.995 Ze=-149.175 Az status=0008 Ze status=0009 03:44:11 Check angles 03:44:11 SkyScan query 03:44:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.115<-23341 Statuses=0008 0009 03:44:12 Msec=5250 True Az=112.995 Ze=-170.115 Az status=0008 Ze status=0009 03:44:12 Check angles 03:44:12 SkyScan query 03:44:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:44:12 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:44:12 Message to Master queued w/err=0: serial=74868 error=0 03:44:17 Received message from Master: op=Filter serial=74869 03:44:17 Color wheel filter change from 0 to 0 03:44:17 FLIGetFilterPos err=0 currentPosition=0 03:44:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:17 Filter is already there-color wheel unchanged 03:44:18 Received message from Master: op=Shutter serial=74870 03:44:18 Shutter LASER open 03:44:18 Received message from Camera: op=State serial=74872 03:44:18 GetSingleValue result=40 Value=cccccccc 03:44:18 SkyScan query 03:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:44:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:18 Parameters OK 03:44:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:18 Set A/D data flow result=40 03:44:18 Set A/D channel type result=40 03:44:18 Set A/D encoding result=40 03:44:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:18 Set channel filter=0.000000e+000 result=40 03:44:18 Config A/D Result=40 03:44:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:18 Get A/D filter: -9.255963e+061 result=40 03:44:18 Get A/D value=-858993460 result=40 03:44:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:18 Parameters OK 03:44:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:18 Set A/D data flow result=40 03:44:18 Set A/D channel type result=40 03:44:18 Set A/D encoding result=40 03:44:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:18 Set channel filter=0.000000e+000 result=40 03:44:18 Config A/D Result=40 03:44:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:18 Get A/D filter: -9.255963e+061 result=40 03:44:18 Get A/D value=-858993460 result=40 03:44:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:18 Aux= 03:44:18 Message to Camera, serial 74872 queued 03:44:27 Received message from Master: op=Shutter serial=74882 03:44:27 Shutter LASER close 03:44:27 Received message from Master: op=PointingHead serial=74886 03:44:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:44:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:44:28 Point started: ret=0 03:44:28 point_skyscan result=0 03:44:28 Check angles 03:44:28 SkyScan query 03:44:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 03:44:29 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 03:44:29 Check angles 03:44:29 SkyScan query 03:44:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 03:44:30 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 03:44:30 Check angles 03:44:30 SkyScan query 03:44:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.74<-18716 Statuses=0008 0009 03:44:30 Msec=1500 True Az=112.995 Ze=-100.74 Az status=0008 Ze status=0009 03:44:31 Check angles 03:44:31 SkyScan query 03:44:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.8<-17320 Statuses=0008 0009 03:44:31 Msec=2250 True Az=112.995 Ze=-79.8 Az status=0008 Ze status=0009 03:44:31 Check angles 03:44:31 SkyScan query 03:44:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.365<-15891 Statuses=0008 0009 03:44:32 Msec=3000 True Az=112.995 Ze=-58.365 Az status=0008 Ze status=0009 03:44:32 Check angles 03:44:32 SkyScan query 03:44:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.47<-14498 Statuses=0008 0009 03:44:33 Msec=3750 True Az=112.995 Ze=-37.47 Az status=0008 Ze status=0009 03:44:33 Check angles 03:44:33 SkyScan query 03:44:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.5<-13100 Statuses=0008 0009 03:44:33 Msec=4500 True Az=112.995 Ze=-16.5 Az status=0008 Ze status=0009 03:44:34 Check angles 03:44:34 SkyScan query 03:44:34 SkyScan query done: ret=0 az=112.995<-7533 ze=4.71<-11686 Statuses=0008 0009 03:44:34 Msec=5250 True Az=112.995 Ze=4.71 Az status=0008 Ze status=0009 03:44:34 Check angles 03:44:34 SkyScan query 03:44:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:44:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:44:35 Message to Master queued w/err=0: serial=74886 error=0 03:44:40 Received message from Master: op=Filter serial=74887 03:44:40 Color wheel filter change from 0 to 0 03:44:40 FLIGetFilterPos err=0 currentPosition=0 03:44:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:40 Filter is already there-color wheel unchanged 03:44:40 Received message from Master: op=Shutter serial=74888 03:44:40 Shutter LASER close 03:44:40 Received message from Camera: op=State serial=74890 03:44:40 GetSingleValue result=40 Value=cccccccc 03:44:40 SkyScan query 03:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:44:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:41 Parameters OK 03:44:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:41 Set A/D data flow result=40 03:44:41 Set A/D channel type result=40 03:44:41 Set A/D encoding result=40 03:44:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:41 Set channel filter=0.000000e+000 result=40 03:44:41 Config A/D Result=40 03:44:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:41 Get A/D filter: -9.255963e+061 result=40 03:44:41 Get A/D value=-858993460 result=40 03:44:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:41 Parameters OK 03:44:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:41 Set A/D data flow result=40 03:44:41 Set A/D channel type result=40 03:44:41 Set A/D encoding result=40 03:44:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:41 Set channel filter=0.000000e+000 result=40 03:44:41 Config A/D Result=40 03:44:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:41 Get A/D filter: -9.255963e+061 result=40 03:44:41 Get A/D value=-858993460 result=40 03:44:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:41 Aux= 03:44:41 Message to Camera, serial 74890 queued 03:45:18 Received message from Master: op=PointingHead serial=74903 03:45:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:45:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:45:18 Point started: ret=0 03:45:18 point_skyscan result=0 03:45:19 Check angles 03:45:19 SkyScan query 03:45:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:45:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:45:19 Message to Master queued w/err=0: serial=74903 error=0 03:45:24 Received message from Master: op=Filter serial=74904 03:45:24 Color wheel filter change from 0 to 0 03:45:24 FLIGetFilterPos err=0 currentPosition=0 03:45:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:24 Filter is already there-color wheel unchanged 03:45:25 Received message from Master: op=Shutter serial=74905 03:45:25 Shutter LASER close 03:45:25 Received message from Camera: op=State serial=74907 03:45:25 GetSingleValue result=40 Value=cccccccc 03:45:25 SkyScan query 03:45:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:45:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:25 Parameters OK 03:45:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:25 Set A/D data flow result=40 03:45:25 Set A/D channel type result=40 03:45:25 Set A/D encoding result=40 03:45:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:25 Set channel filter=0.000000e+000 result=40 03:45:25 Config A/D Result=40 03:45:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:25 Get A/D filter: -9.255963e+061 result=40 03:45:25 Get A/D value=-858993460 result=40 03:45:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:25 Parameters OK 03:45:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:25 Set A/D data flow result=40 03:45:25 Set A/D channel type result=40 03:45:25 Set A/D encoding result=40 03:45:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:25 Set channel filter=0.000000e+000 result=40 03:45:25 Config A/D Result=40 03:45:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:25 Get A/D filter: -9.255963e+061 result=40 03:45:25 Get A/D value=-858993460 result=40 03:45:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:25 Aux= 03:45:25 Message to Camera, serial 74907 queued 03:46:02 Received message from Master: op=PointingHead serial=74920 03:46:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:46:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:46:02 Point started: ret=0 03:46:02 point_skyscan result=0 03:46:03 Check angles 03:46:03 SkyScan query 03:46:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:46:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:46:04 Message to Master queued w/err=0: serial=74920 error=0 03:46:09 Received message from Master: op=Filter serial=74921 03:46:09 Color wheel filter change from 0 to 0 03:46:09 FLIGetFilterPos err=0 currentPosition=0 03:46:09 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:09 Filter is already there-color wheel unchanged 03:46:09 Received message from Master: op=Shutter serial=74922 03:46:09 Shutter LASER close 03:46:09 Received message from Camera: op=State serial=74924 03:46:09 GetSingleValue result=40 Value=cccccccc 03:46:09 SkyScan query 03:46:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:46:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:09 Parameters OK 03:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:09 Set A/D data flow result=40 03:46:09 Set A/D channel type result=40 03:46:09 Set A/D encoding result=40 03:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:09 Set channel filter=0.000000e+000 result=40 03:46:09 Config A/D Result=40 03:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:09 Get A/D filter: -9.255963e+061 result=40 03:46:09 Get A/D value=-858993460 result=40 03:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:09 Parameters OK 03:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:09 Set A/D data flow result=40 03:46:09 Set A/D channel type result=40 03:46:09 Set A/D encoding result=40 03:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:09 Set channel filter=0.000000e+000 result=40 03:46:09 Config A/D Result=40 03:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:09 Get A/D filter: -9.255963e+061 result=40 03:46:09 Get A/D value=-858993460 result=40 03:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:09 Aux= 03:46:09 Message to Camera, serial 74924 queued 03:46:46 Received message from Master: op=PointingHead serial=74937 03:46:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:46:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:46:47 Point started: ret=0 03:46:47 point_skyscan result=0 03:46:47 Check angles 03:46:47 SkyScan query 03:46:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:46:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:46:48 Message to Master queued w/err=0: serial=74937 error=0 03:46:53 Received message from Master: op=Filter serial=74938 03:46:53 Color wheel filter change from 0 to 0 03:46:53 FLIGetFilterPos err=0 currentPosition=0 03:46:53 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:53 Filter is already there-color wheel unchanged 03:46:53 Received message from Master: op=Shutter serial=74939 03:46:53 Shutter LASER close 03:46:53 Received message from Camera: op=State serial=74941 03:46:53 GetSingleValue result=40 Value=cccccccc 03:46:53 SkyScan query 03:46:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:46:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:54 Parameters OK 03:46:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:54 Set A/D data flow result=40 03:46:54 Set A/D channel type result=40 03:46:54 Set A/D encoding result=40 03:46:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:54 Set channel filter=0.000000e+000 result=40 03:46:54 Config A/D Result=40 03:46:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:54 Get A/D filter: -9.255963e+061 result=40 03:46:54 Get A/D value=-858993460 result=40 03:46:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:54 Parameters OK 03:46:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:54 Set A/D data flow result=40 03:46:54 Set A/D channel type result=40 03:46:54 Set A/D encoding result=40 03:46:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:54 Set channel filter=0.000000e+000 result=40 03:46:54 Config A/D Result=40 03:46:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:54 Get A/D filter: -9.255963e+061 result=40 03:46:54 Get A/D value=-858993460 result=40 03:46:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:54 Aux= 03:46:54 Message to Camera, serial 74941 queued 03:47:31 Received message from Master: op=PointingHead serial=74954 03:47:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:47:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:47:31 Point started: ret=0 03:47:31 point_skyscan result=0 03:47:32 Check angles 03:47:32 SkyScan query 03:47:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 03:47:32 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 03:47:32 Check angles 03:47:32 SkyScan query 03:47:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 03:47:33 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 03:47:33 Check angles 03:47:33 SkyScan query 03:47:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 03:47:34 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 03:47:34 Check angles 03:47:34 SkyScan query 03:47:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.58<-17772 Statuses=0008 0009 03:47:35 Msec=2250 True Az=112.995 Ze=-86.58 Az status=0008 Ze status=0009 03:47:35 Check angles 03:47:35 SkyScan query 03:47:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.535<-19169 Statuses=0008 0009 03:47:35 Msec=3000 True Az=112.995 Ze=-107.535 Az status=0008 Ze status=0009 03:47:35 Check angles 03:47:35 SkyScan query 03:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.475<-20565 Statuses=0008 0009 03:47:36 Msec=3750 True Az=112.995 Ze=-128.475 Az status=0008 Ze status=0009 03:47:36 Check angles 03:47:36 SkyScan query 03:47:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.43<-21962 Statuses=0008 0009 03:47:37 Msec=4500 True Az=112.995 Ze=-149.43 Az status=0008 Ze status=0009 03:47:37 Check angles 03:47:37 SkyScan query 03:47:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.4<-23360 Statuses=0008 0009 03:47:38 Msec=5250 True Az=112.995 Ze=-170.4 Az status=0008 Ze status=0009 03:47:38 Check angles 03:47:38 SkyScan query 03:47:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:47:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:47:38 Message to Master queued w/err=0: serial=74954 error=0 03:47:43 Received message from Master: op=Filter serial=74955 03:47:43 Color wheel filter change from 0 to 0 03:47:43 FLIGetFilterPos err=0 currentPosition=0 03:47:43 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:43 Filter is already there-color wheel unchanged 03:47:43 Received message from Master: op=Shutter serial=74956 03:47:43 Shutter LASER open 03:47:44 Received message from Camera: op=State serial=74958 03:47:44 GetSingleValue result=40 Value=cccccccc 03:47:44 SkyScan query 03:47:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:47:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:44 Parameters OK 03:47:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:44 Set A/D data flow result=40 03:47:44 Set A/D channel type result=40 03:47:44 Set A/D encoding result=40 03:47:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:44 Set channel filter=0.000000e+000 result=40 03:47:44 Config A/D Result=40 03:47:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:44 Get A/D filter: -9.255963e+061 result=40 03:47:44 Get A/D value=-858993460 result=40 03:47:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:44 Parameters OK 03:47:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:44 Set A/D data flow result=40 03:47:44 Set A/D channel type result=40 03:47:44 Set A/D encoding result=40 03:47:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:44 Set channel filter=0.000000e+000 result=40 03:47:44 Config A/D Result=40 03:47:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:44 Get A/D filter: -9.255963e+061 result=40 03:47:44 Get A/D value=-858993460 result=40 03:47:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:44 Aux= 03:47:44 Message to Camera, serial 74958 queued 03:47:52 Received message from Master: op=Shutter serial=74967 03:47:52 Shutter LASER close 03:47:52 Received message from Master: op=PointingHead serial=74971 03:47:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:47:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:47:53 Point started: ret=0 03:47:53 point_skyscan result=0 03:47:53 Check angles 03:47:53 SkyScan query 03:47:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 03:47:54 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 03:47:54 Check angles 03:47:54 SkyScan query 03:47:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 03:47:55 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 03:47:55 Check angles 03:47:55 SkyScan query 03:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 03:47:56 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 03:47:56 Check angles 03:47:56 SkyScan query 03:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.995<-17333 Statuses=0008 0009 03:47:56 Msec=2250 True Az=112.995 Ze=-79.995 Az status=0008 Ze status=0009 03:47:56 Check angles 03:47:56 SkyScan query 03:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.055<-15937 Statuses=0008 0009 03:47:57 Msec=3000 True Az=112.995 Ze=-59.055 Az status=0008 Ze status=0009 03:47:57 Check angles 03:47:57 SkyScan query 03:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.07<-14538 Statuses=0008 0009 03:47:58 Msec=3750 True Az=112.995 Ze=-38.07 Az status=0008 Ze status=0009 03:47:58 Check angles 03:47:58 SkyScan query 03:47:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.115<-13141 Statuses=0008 0009 03:47:59 Msec=4500 True Az=112.995 Ze=-17.115 Az status=0008 Ze status=0009 03:47:59 Check angles 03:47:59 SkyScan query 03:47:59 SkyScan query done: ret=0 az=112.995<-7533 ze=3.84<-11744 Statuses=0008 0009 03:47:59 Msec=5250 True Az=112.995 Ze=3.84 Az status=0008 Ze status=0009 03:47:59 Check angles 03:47:59 SkyScan query 03:48:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:48:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:48:00 Message to Master queued w/err=0: serial=74971 error=0 03:48:05 Received message from Master: op=Filter serial=74972 03:48:05 Color wheel filter change from 0 to 0 03:48:05 FLIGetFilterPos err=0 currentPosition=0 03:48:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:05 Filter is already there-color wheel unchanged 03:48:05 Received message from Master: op=Shutter serial=74973 03:48:05 Shutter LASER close 03:48:05 Received message from Camera: op=State serial=74975 03:48:05 GetSingleValue result=40 Value=cccccccc 03:48:05 SkyScan query 03:48:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:48:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:06 Parameters OK 03:48:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:06 Set A/D data flow result=40 03:48:06 Set A/D channel type result=40 03:48:06 Set A/D encoding result=40 03:48:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:06 Set channel filter=0.000000e+000 result=40 03:48:06 Config A/D Result=40 03:48:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:06 Get A/D filter: -9.255963e+061 result=40 03:48:06 Get A/D value=-858993460 result=40 03:48:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:06 Parameters OK 03:48:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:06 Set A/D data flow result=40 03:48:06 Set A/D channel type result=40 03:48:06 Set A/D encoding result=40 03:48:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:06 Set channel filter=0.000000e+000 result=40 03:48:06 Config A/D Result=40 03:48:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:06 Get A/D filter: -9.255963e+061 result=40 03:48:06 Get A/D value=-858993460 result=40 03:48:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:06 Aux= 03:48:06 Message to Camera, serial 74975 queued 03:48:42 Received message from Master: op=PointingHead serial=74987 03:48:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:48:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:48:42 Point started: ret=0 03:48:42 point_skyscan result=0 03:48:43 Check angles 03:48:43 SkyScan query 03:48:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:48:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:48:44 Message to Master queued w/err=0: serial=74987 error=0 03:48:49 Received message from Master: op=Filter serial=74988 03:48:49 Color wheel filter change from 0 to 0 03:48:49 FLIGetFilterPos err=0 currentPosition=0 03:48:49 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:49 Filter is already there-color wheel unchanged 03:48:49 Received message from Master: op=Shutter serial=74989 03:48:49 Shutter LASER close 03:48:49 Received message from Camera: op=State serial=74991 03:48:49 GetSingleValue result=40 Value=cccccccc 03:48:49 SkyScan query 03:48:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:48:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:49 Parameters OK 03:48:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:49 Set A/D data flow result=40 03:48:49 Set A/D channel type result=40 03:48:49 Set A/D encoding result=40 03:48:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:49 Set channel filter=0.000000e+000 result=40 03:48:49 Config A/D Result=40 03:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:49 Get A/D filter: -9.255963e+061 result=40 03:48:49 Get A/D value=-858993460 result=40 03:48:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:49 Parameters OK 03:48:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:49 Set A/D data flow result=40 03:48:49 Set A/D channel type result=40 03:48:49 Set A/D encoding result=40 03:48:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:49 Set channel filter=0.000000e+000 result=40 03:48:49 Config A/D Result=40 03:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:49 Get A/D filter: -9.255963e+061 result=40 03:48:49 Get A/D value=-858993460 result=40 03:48:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:49 Aux= 03:48:49 Message to Camera, serial 74991 queued 03:49:26 Received message from Master: op=PointingHead serial=75004 03:49:26 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:49:26 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:49:26 Point started: ret=0 03:49:26 point_skyscan result=0 03:49:27 Check angles 03:49:27 SkyScan query 03:49:28 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.495<-12433 Statuses=0009 0008 03:49:28 Msec=0 True Az=135.9 Ze=-6.495 Az status=0009 Ze status=0008 03:49:28 Check angles 03:49:28 SkyScan query 03:49:29 SkyScan query done: ret=0 az=153.405<-10227 ze=-6.48<-12432 Statuses=0009 0008 03:49:29 Msec=750 True Az=153.405 Ze=-6.48 Az status=0009 Ze status=0008 03:49:29 Check angles 03:49:29 SkyScan query 03:49:29 SkyScan query done: ret=0 az=170.865<-11391 ze=-6.48<-12432 Statuses=0009 0008 03:49:29 Msec=1500 True Az=170.865 Ze=-6.48 Az status=0009 Ze status=0008 03:49:29 Check angles 03:49:29 SkyScan query 03:49:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:49:30 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 03:49:30 Message to Master queued w/err=0: serial=75004 error=0 03:49:35 Received message from Master: op=Filter serial=75005 03:49:35 Color wheel filter change from 0 to 0 03:49:35 FLIGetFilterPos err=0 currentPosition=0 03:49:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:49:35 Filter is already there-color wheel unchanged 03:49:35 Received message from Master: op=Shutter serial=75006 03:49:35 Shutter LASER close 03:49:35 Received message from Camera: op=State serial=75008 03:49:35 GetSingleValue result=40 Value=cccccccc 03:49:35 SkyScan query 03:49:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:49:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:36 Parameters OK 03:49:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:36 Set A/D data flow result=40 03:49:36 Set A/D channel type result=40 03:49:36 Set A/D encoding result=40 03:49:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:36 Set channel filter=0.000000e+000 result=40 03:49:36 Config A/D Result=40 03:49:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:36 Get A/D filter: -9.255963e+061 result=40 03:49:36 Get A/D value=-858993460 result=40 03:49:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:36 Parameters OK 03:49:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:36 Set A/D data flow result=40 03:49:36 Set A/D channel type result=40 03:49:36 Set A/D encoding result=40 03:49:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:36 Set channel filter=0.000000e+000 result=40 03:49:36 Config A/D Result=40 03:49:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:36 Get A/D filter: -9.255963e+061 result=40 03:49:36 Get A/D value=-858993460 result=40 03:49:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:49:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:49:36 Aux= 03:49:36 Message to Camera, serial 75008 queued 03:50:13 Received message from Master: op=PointingHead serial=75021 03:50:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:50:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:50:13 Point started: ret=0 03:50:13 point_skyscan result=0 03:50:14 Check angles 03:50:14 SkyScan query 03:50:14 SkyScan query done: ret=0 az=152.685<-10179 ze=6.51<-11566 Statuses=0009 0008 03:50:14 Msec=0 True Az=152.685 Ze=6.51 Az status=0009 Ze status=0008 03:50:15 Check angles 03:50:15 SkyScan query 03:50:15 SkyScan query done: ret=0 az=135.24<-9016 ze=6.495<-11567 Statuses=0009 0008 03:50:15 Msec=750 True Az=135.24 Ze=6.495 Az status=0009 Ze status=0008 03:50:15 Check angles 03:50:15 SkyScan query 03:50:16 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 03:50:16 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 03:50:16 Check angles 03:50:16 SkyScan query 03:50:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:50:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:50:17 Message to Master queued w/err=0: serial=75021 error=0 03:50:22 Received message from Master: op=Filter serial=75022 03:50:22 Color wheel filter change from 0 to 0 03:50:22 FLIGetFilterPos err=0 currentPosition=0 03:50:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:22 Filter is already there-color wheel unchanged 03:50:22 Received message from Master: op=Shutter serial=75023 03:50:22 Shutter LASER close 03:50:22 Received message from Camera: op=State serial=75025 03:50:22 GetSingleValue result=40 Value=cccccccc 03:50:22 SkyScan query 03:50:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:50:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:22 Parameters OK 03:50:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:22 Set A/D data flow result=40 03:50:22 Set A/D channel type result=40 03:50:22 Set A/D encoding result=40 03:50:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:22 Set channel filter=0.000000e+000 result=40 03:50:22 Config A/D Result=40 03:50:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:22 Get A/D filter: -9.255963e+061 result=40 03:50:22 Get A/D value=-858993460 result=40 03:50:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:22 Parameters OK 03:50:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:22 Set A/D data flow result=40 03:50:22 Set A/D channel type result=40 03:50:22 Set A/D encoding result=40 03:50:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:22 Set channel filter=0.000000e+000 result=40 03:50:22 Config A/D Result=40 03:50:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:22 Get A/D filter: -9.255963e+061 result=40 03:50:22 Get A/D value=-858993460 result=40 03:50:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:22 Aux= 03:50:22 Message to Camera, serial 75025 queued 03:50:59 Received message from Master: op=PointingHead serial=75038 03:50:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:50:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:51:00 Point started: ret=0 03:51:00 point_skyscan result=0 03:51:00 Check angles 03:51:00 SkyScan query 03:51:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.835<-13589 Statuses=0008 0009 03:51:01 Msec=0 True Az=112.995 Ze=-23.835 Az status=0008 Ze status=0009 03:51:01 Check angles 03:51:01 SkyScan query 03:51:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.805<-14987 Statuses=0008 0009 03:51:02 Msec=750 True Az=112.995 Ze=-44.805 Az status=0008 Ze status=0009 03:51:02 Check angles 03:51:02 SkyScan query 03:51:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 03:51:02 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 03:51:03 Check angles 03:51:03 SkyScan query 03:51:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.12<-17808 Statuses=0008 0009 03:51:03 Msec=2250 True Az=112.995 Ze=-87.12 Az status=0008 Ze status=0009 03:51:03 Check angles 03:51:03 SkyScan query 03:51:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.06<-19204 Statuses=0008 0009 03:51:04 Msec=3000 True Az=112.995 Ze=-108.06 Az status=0008 Ze status=0009 03:51:04 Check angles 03:51:04 SkyScan query 03:51:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 03:51:05 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 03:51:05 Check angles 03:51:05 SkyScan query 03:51:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.985<-21999 Statuses=0008 0009 03:51:05 Msec=4500 True Az=112.995 Ze=-149.985 Az status=0008 Ze status=0009 03:51:06 Check angles 03:51:06 SkyScan query 03:51:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 03:51:06 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 03:51:06 Check angles 03:51:06 SkyScan query 03:51:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:51:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:51:07 Message to Master queued w/err=0: serial=75038 error=0 03:51:12 Received message from Master: op=Filter serial=75039 03:51:12 Color wheel filter change from 0 to 0 03:51:12 FLIGetFilterPos err=0 currentPosition=0 03:51:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:12 Filter is already there-color wheel unchanged 03:51:12 Received message from Master: op=Shutter serial=75040 03:51:12 Shutter LASER open 03:51:12 Received message from Camera: op=State serial=75042 03:51:12 GetSingleValue result=40 Value=cccccccc 03:51:12 SkyScan query 03:51:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:51:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:13 Parameters OK 03:51:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:13 Set A/D data flow result=40 03:51:13 Set A/D channel type result=40 03:51:13 Set A/D encoding result=40 03:51:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:13 Set channel filter=0.000000e+000 result=40 03:51:13 Config A/D Result=40 03:51:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:13 Get A/D filter: -9.255963e+061 result=40 03:51:13 Get A/D value=-858993460 result=40 03:51:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:13 Parameters OK 03:51:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:13 Set A/D data flow result=40 03:51:13 Set A/D channel type result=40 03:51:13 Set A/D encoding result=40 03:51:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:13 Set channel filter=0.000000e+000 result=40 03:51:13 Config A/D Result=40 03:51:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:13 Get A/D filter: -9.255963e+061 result=40 03:51:13 Get A/D value=-858993460 result=40 03:51:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:13 Aux= 03:51:13 Message to Camera, serial 75042 queued 03:51:21 Received message from Master: op=Shutter serial=75052 03:51:21 Shutter LASER close 03:51:22 Received message from Master: op=PointingHead serial=75056 03:51:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:51:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:51:22 Point started: ret=0 03:51:22 point_skyscan result=0 03:51:23 Check angles 03:51:23 SkyScan query 03:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 03:51:23 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 03:51:24 Check angles 03:51:24 SkyScan query 03:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 03:51:24 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 03:51:24 Check angles 03:51:24 SkyScan query 03:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 03:51:25 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 03:51:25 Check angles 03:51:25 SkyScan query 03:51:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 03:51:26 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 03:51:26 Check angles 03:51:26 SkyScan query 03:51:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 03:51:26 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 03:51:27 Check angles 03:51:27 SkyScan query 03:51:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.95<-14530 Statuses=0008 0009 03:51:27 Msec=3750 True Az=112.995 Ze=-37.95 Az status=0008 Ze status=0009 03:51:27 Check angles 03:51:27 SkyScan query 03:51:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.01<-13134 Statuses=0008 0009 03:51:28 Msec=4500 True Az=112.995 Ze=-17.01 Az status=0008 Ze status=0009 03:51:28 Check angles 03:51:28 SkyScan query 03:51:29 SkyScan query done: ret=0 az=112.995<-7533 ze=3.96<-11736 Statuses=0008 0009 03:51:29 Msec=5250 True Az=112.995 Ze=3.96 Az status=0008 Ze status=0009 03:51:29 Check angles 03:51:29 SkyScan query 03:51:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:51:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:51:29 Message to Master queued w/err=0: serial=75056 error=0 03:51:34 Received message from Master: op=Filter serial=75057 03:51:34 Color wheel filter change from 0 to 0 03:51:34 FLIGetFilterPos err=0 currentPosition=0 03:51:34 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:34 Filter is already there-color wheel unchanged 03:51:35 Received message from Master: op=Shutter serial=75058 03:51:35 Shutter LASER close 03:51:35 Received message from Camera: op=State serial=75060 03:51:35 GetSingleValue result=40 Value=cccccccc 03:51:35 SkyScan query 03:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:51:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:35 Parameters OK 03:51:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:35 Set A/D data flow result=40 03:51:35 Set A/D channel type result=40 03:51:35 Set A/D encoding result=40 03:51:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:35 Set channel filter=0.000000e+000 result=40 03:51:35 Config A/D Result=40 03:51:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:35 Get A/D filter: -9.255963e+061 result=40 03:51:35 Get A/D value=-858993460 result=40 03:51:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:35 Parameters OK 03:51:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:35 Set A/D data flow result=40 03:51:35 Set A/D channel type result=40 03:51:35 Set A/D encoding result=40 03:51:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:35 Set channel filter=0.000000e+000 result=40 03:51:35 Config A/D Result=40 03:51:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:35 Get A/D filter: -9.255963e+061 result=40 03:51:35 Get A/D value=-858993460 result=40 03:51:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:35 Aux= 03:51:35 Message to Camera, serial 75060 queued 03:52:12 Received message from Master: op=PointingHead serial=75073 03:52:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:52:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:52:13 Point started: ret=0 03:52:13 point_skyscan result=0 03:52:13 Check angles 03:52:13 SkyScan query 03:52:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:52:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:52:14 Message to Master queued w/err=0: serial=75073 error=0 03:52:19 Received message from Master: op=Filter serial=75074 03:52:19 Color wheel filter change from 0 to 0 03:52:19 FLIGetFilterPos err=0 currentPosition=0 03:52:19 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:19 Filter is already there-color wheel unchanged 03:52:19 Received message from Master: op=Shutter serial=75075 03:52:19 Shutter LASER close 03:52:19 Received message from Camera: op=State serial=75077 03:52:19 GetSingleValue result=40 Value=cccccccc 03:52:19 SkyScan query 03:52:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:52:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:20 Parameters OK 03:52:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:20 Set A/D data flow result=40 03:52:20 Set A/D channel type result=40 03:52:20 Set A/D encoding result=40 03:52:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:20 Set channel filter=0.000000e+000 result=40 03:52:20 Config A/D Result=40 03:52:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:20 Get A/D filter: -9.255963e+061 result=40 03:52:20 Get A/D value=-858993460 result=40 03:52:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:20 Parameters OK 03:52:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:20 Set A/D data flow result=40 03:52:20 Set A/D channel type result=40 03:52:20 Set A/D encoding result=40 03:52:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:20 Set channel filter=0.000000e+000 result=40 03:52:20 Config A/D Result=40 03:52:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:20 Get A/D filter: -9.255963e+061 result=40 03:52:20 Get A/D value=-858993460 result=40 03:52:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:20 Aux= 03:52:20 Message to Camera, serial 75077 queued 03:52:57 Received message from Master: op=PointingHead serial=75090 03:52:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:52:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:52:57 Point started: ret=0 03:52:57 point_skyscan result=0 03:52:58 Check angles 03:52:58 SkyScan query 03:52:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:52:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:52:58 Message to Master queued w/err=0: serial=75090 error=0 03:53:03 Received message from Master: op=Filter serial=75091 03:53:03 Color wheel filter change from 0 to 0 03:53:03 FLIGetFilterPos err=0 currentPosition=0 03:53:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:03 Filter is already there-color wheel unchanged 03:53:03 Received message from Master: op=Shutter serial=75092 03:53:03 Shutter LASER close 03:53:03 Received message from Camera: op=State serial=75094 03:53:03 GetSingleValue result=40 Value=cccccccc 03:53:03 SkyScan query 03:53:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:53:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:04 Parameters OK 03:53:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:04 Set A/D data flow result=40 03:53:04 Set A/D channel type result=40 03:53:04 Set A/D encoding result=40 03:53:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:04 Set channel filter=0.000000e+000 result=40 03:53:04 Config A/D Result=40 03:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:04 Get A/D filter: -9.255963e+061 result=40 03:53:04 Get A/D value=-858993460 result=40 03:53:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:04 Parameters OK 03:53:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:04 Set A/D data flow result=40 03:53:04 Set A/D channel type result=40 03:53:04 Set A/D encoding result=40 03:53:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:04 Set channel filter=0.000000e+000 result=40 03:53:04 Config A/D Result=40 03:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:04 Get A/D filter: -9.255963e+061 result=40 03:53:04 Get A/D value=-858993460 result=40 03:53:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:04 Aux= 03:53:04 Message to Camera, serial 75094 queued 03:53:41 Received message from Master: op=PointingHead serial=75107 03:53:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:53:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:53:41 Point started: ret=0 03:53:41 point_skyscan result=0 03:53:42 Check angles 03:53:42 SkyScan query 03:53:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:53:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:53:43 Message to Master queued w/err=0: serial=75107 error=0 03:53:48 Received message from Master: op=Filter serial=75108 03:53:48 Color wheel filter change from 0 to 0 03:53:48 FLIGetFilterPos err=0 currentPosition=0 03:53:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:48 Filter is already there-color wheel unchanged 03:53:48 Received message from Master: op=Shutter serial=75109 03:53:48 Shutter LASER close 03:53:48 Received message from Camera: op=State serial=75111 03:53:48 GetSingleValue result=40 Value=cccccccc 03:53:48 SkyScan query 03:53:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:53:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:48 Parameters OK 03:53:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:48 Set A/D data flow result=40 03:53:48 Set A/D channel type result=40 03:53:48 Set A/D encoding result=40 03:53:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:48 Set channel filter=0.000000e+000 result=40 03:53:48 Config A/D Result=40 03:53:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:48 Get A/D filter: -9.255963e+061 result=40 03:53:48 Get A/D value=-858993460 result=40 03:53:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:48 Parameters OK 03:53:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:48 Set A/D data flow result=40 03:53:48 Set A/D channel type result=40 03:53:48 Set A/D encoding result=40 03:53:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:48 Set channel filter=0.000000e+000 result=40 03:53:48 Config A/D Result=40 03:53:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:48 Get A/D filter: -9.255963e+061 result=40 03:53:48 Get A/D value=-858993460 result=40 03:53:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:48 Aux= 03:53:48 Message to Camera, serial 75111 queued 03:54:25 Received message from Master: op=PointingHead serial=75124 03:54:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:54:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:54:26 Point started: ret=0 03:54:26 point_skyscan result=0 03:54:26 Check angles 03:54:26 SkyScan query 03:54:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.685<-13579 Statuses=0008 0009 03:54:27 Msec=0 True Az=112.995 Ze=-23.685 Az status=0008 Ze status=0009 03:54:27 Check angles 03:54:27 SkyScan query 03:54:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.06<-15004 Statuses=0008 0009 [UTC 2019-3-3 03:54:28] 03:54:28 Msec=750 True Az=112.995 Ze=-45.06 Az status=0008 Ze status=0009 03:54:28 Check angles 03:54:28 SkyScan query 03:54:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.075<-16405 Statuses=0008 0009 03:54:28 Msec=1500 True Az=112.995 Ze=-66.075 Az status=0008 Ze status=0009 03:54:29 Check angles 03:54:29 SkyScan query 03:54:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.955<-17797 Statuses=0008 0009 03:54:29 Msec=2250 True Az=112.995 Ze=-86.955 Az status=0008 Ze status=0009 03:54:29 Check angles 03:54:29 SkyScan query 03:54:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.345<-19223 Statuses=0008 0009 03:54:30 Msec=3000 True Az=112.995 Ze=-108.345 Az status=0008 Ze status=0009 03:54:30 Check angles 03:54:30 SkyScan query 03:54:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.75<-20650 Statuses=0008 0009 03:54:31 Msec=3750 True Az=112.995 Ze=-129.75 Az status=0008 Ze status=0009 03:54:31 Check angles 03:54:31 SkyScan query 03:54:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.69<-22046 Statuses=0008 0009 03:54:31 Msec=4500 True Az=112.995 Ze=-150.69 Az status=0008 Ze status=0009 03:54:32 Check angles 03:54:32 SkyScan query 03:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.69<-23446 Statuses=0008 0009 03:54:32 Msec=5250 True Az=112.995 Ze=-171.69 Az status=0008 Ze status=0009 03:54:32 Check angles 03:54:32 SkyScan query 03:54:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:54:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:54:33 Message to Master queued w/err=0: serial=75124 error=0 03:54:38 Received message from Master: op=Filter serial=75125 03:54:38 Color wheel filter change from 0 to 0 03:54:38 FLIGetFilterPos err=0 currentPosition=0 03:54:38 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:38 Filter is already there-color wheel unchanged 03:54:38 Received message from Master: op=Shutter serial=75126 03:54:38 Shutter LASER open 03:54:38 Received message from Camera: op=State serial=75128 03:54:38 GetSingleValue result=40 Value=cccccccc 03:54:38 SkyScan query 03:54:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:54:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:39 Parameters OK 03:54:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:39 Set A/D data flow result=40 03:54:39 Set A/D channel type result=40 03:54:39 Set A/D encoding result=40 03:54:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:39 Set channel filter=0.000000e+000 result=40 03:54:39 Config A/D Result=40 03:54:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:39 Get A/D filter: -9.255963e+061 result=40 03:54:39 Get A/D value=-858993460 result=40 03:54:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:39 Parameters OK 03:54:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:39 Set A/D data flow result=40 03:54:39 Set A/D channel type result=40 03:54:39 Set A/D encoding result=40 03:54:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:39 Set channel filter=0.000000e+000 result=40 03:54:39 Config A/D Result=40 03:54:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:39 Get A/D filter: -9.255963e+061 result=40 03:54:39 Get A/D value=-858993460 result=40 03:54:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:39 Aux= 03:54:39 Message to Camera, serial 75128 queued 03:54:47 Received message from Master: op=Shutter serial=75138 03:54:47 Shutter LASER close 03:54:48 Received message from Master: op=PointingHead serial=75142 03:54:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:54:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:54:48 Point started: ret=0 03:54:48 point_skyscan result=0 03:54:49 Check angles 03:54:49 SkyScan query 03:54:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 03:54:50 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 03:54:50 Check angles 03:54:50 SkyScan query 03:54:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 03:54:50 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 03:54:50 Check angles 03:54:50 SkyScan query 03:54:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 03:54:51 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 03:54:51 Check angles 03:54:51 SkyScan query 03:54:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.325<-17355 Statuses=0008 0009 03:54:52 Msec=2250 True Az=112.995 Ze=-80.325 Az status=0008 Ze status=0009 03:54:52 Check angles 03:54:52 SkyScan query 03:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.385<-15959 Statuses=0008 0009 03:54:53 Msec=3000 True Az=112.995 Ze=-59.385 Az status=0008 Ze status=0009 03:54:53 Check angles 03:54:53 SkyScan query 03:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.415<-14561 Statuses=0008 0009 03:54:53 Msec=3750 True Az=112.995 Ze=-38.415 Az status=0008 Ze status=0009 03:54:53 Check angles 03:54:53 SkyScan query 03:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.475<-13165 Statuses=0008 0009 03:54:54 Msec=4500 True Az=112.995 Ze=-17.475 Az status=0008 Ze status=0009 03:54:54 Check angles 03:54:54 SkyScan query 03:54:55 SkyScan query done: ret=0 az=112.995<-7533 ze=3.495<-11767 Statuses=0008 0009 03:54:55 Msec=5250 True Az=112.995 Ze=3.495 Az status=0008 Ze status=0009 03:54:55 Check angles 03:54:55 SkyScan query 03:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:54:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:54:56 Message to Master queued w/err=0: serial=75142 error=0 03:55:01 Received message from Master: op=Filter serial=75143 03:55:01 Color wheel filter change from 0 to 0 03:55:01 FLIGetFilterPos err=0 currentPosition=0 03:55:01 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:01 Filter is already there-color wheel unchanged 03:55:01 Received message from Master: op=Shutter serial=75144 03:55:01 Shutter LASER close 03:55:01 Received message from Camera: op=State serial=75146 03:55:01 GetSingleValue result=40 Value=cccccccc 03:55:01 SkyScan query 03:55:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:55:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:01 Parameters OK 03:55:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:01 Set A/D data flow result=40 03:55:01 Set A/D channel type result=40 03:55:01 Set A/D encoding result=40 03:55:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:01 Set channel filter=0.000000e+000 result=40 03:55:01 Config A/D Result=40 03:55:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:01 Get A/D filter: -9.255963e+061 result=40 03:55:01 Get A/D value=-858993460 result=40 03:55:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:01 Parameters OK 03:55:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:01 Set A/D data flow result=40 03:55:01 Set A/D channel type result=40 03:55:01 Set A/D encoding result=40 03:55:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:01 Set channel filter=0.000000e+000 result=40 03:55:01 Config A/D Result=40 03:55:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:01 Get A/D filter: -9.255963e+061 result=40 03:55:01 Get A/D value=-858993460 result=40 03:55:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:01 Aux= 03:55:01 Message to Camera, serial 75146 queued 03:55:38 Received message from Master: op=PointingHead serial=75159 03:55:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:55:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:55:39 Point started: ret=0 03:55:39 point_skyscan result=0 03:55:39 Check angles 03:55:39 SkyScan query 03:55:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:55:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:55:40 Message to Master queued w/err=0: serial=75159 error=0 03:55:45 Received message from Master: op=Filter serial=75160 03:55:45 Color wheel filter change from 0 to 0 03:55:45 FLIGetFilterPos err=0 currentPosition=0 03:55:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:45 Filter is already there-color wheel unchanged 03:55:45 Received message from Master: op=Shutter serial=75161 03:55:45 Shutter LASER close 03:55:45 Received message from Camera: op=State serial=75163 03:55:45 GetSingleValue result=40 Value=cccccccc 03:55:45 SkyScan query 03:55:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:55:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:46 Parameters OK 03:55:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:46 Set A/D data flow result=40 03:55:46 Set A/D channel type result=40 03:55:46 Set A/D encoding result=40 03:55:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:46 Set channel filter=0.000000e+000 result=40 03:55:46 Config A/D Result=40 03:55:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:46 Get A/D filter: -9.255963e+061 result=40 03:55:46 Get A/D value=-858993460 result=40 03:55:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:46 Parameters OK 03:55:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:46 Set A/D data flow result=40 03:55:46 Set A/D channel type result=40 03:55:46 Set A/D encoding result=40 03:55:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:46 Set channel filter=0.000000e+000 result=40 03:55:46 Config A/D Result=40 03:55:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:46 Get A/D filter: -9.255963e+061 result=40 03:55:46 Get A/D value=-858993460 result=40 03:55:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:46 Aux= 03:55:46 Message to Camera, serial 75163 queued 03:56:23 Received message from Master: op=PointingHead serial=75176 03:56:23 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:56:23 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:56:23 Point started: ret=0 03:56:23 point_skyscan result=0 03:56:24 Check angles 03:56:24 SkyScan query 03:56:24 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 03:56:24 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 03:56:24 Check angles 03:56:24 SkyScan query 03:56:25 SkyScan query done: ret=0 az=154.035<-10269 ze=-6.495<-12433 Statuses=0009 0008 03:56:25 Msec=750 True Az=154.035 Ze=-6.495 Az status=0009 Ze status=0008 03:56:25 Check angles 03:56:25 SkyScan query 03:56:26 SkyScan query done: ret=0 az=171.405<-11427 ze=-6.495<-12433 Statuses=0009 0008 03:56:26 Msec=1500 True Az=171.405 Ze=-6.495 Az status=0009 Ze status=0008 03:56:26 Check angles 03:56:26 SkyScan query 03:56:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:56:27 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:56:27 Message to Master queued w/err=0: serial=75176 error=0 03:56:32 Received message from Master: op=Filter serial=75177 03:56:32 Color wheel filter change from 0 to 0 03:56:32 FLIGetFilterPos err=0 currentPosition=0 03:56:32 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:32 Filter is already there-color wheel unchanged 03:56:32 Received message from Master: op=Shutter serial=75178 03:56:32 Shutter LASER close 03:56:32 Received message from Camera: op=State serial=75180 03:56:32 GetSingleValue result=40 Value=cccccccc 03:56:32 SkyScan query 03:56:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:56:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:32 Parameters OK 03:56:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:32 Set A/D data flow result=40 03:56:32 Set A/D channel type result=40 03:56:32 Set A/D encoding result=40 03:56:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:32 Set channel filter=0.000000e+000 result=40 03:56:32 Config A/D Result=40 03:56:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:32 Get A/D filter: -9.255963e+061 result=40 03:56:32 Get A/D value=-858993460 result=40 03:56:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:32 Parameters OK 03:56:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:32 Set A/D data flow result=40 03:56:32 Set A/D channel type result=40 03:56:32 Set A/D encoding result=40 03:56:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:32 Set channel filter=0.000000e+000 result=40 03:56:32 Config A/D Result=40 03:56:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:32 Get A/D filter: -9.255963e+061 result=40 03:56:32 Get A/D value=-858993460 result=40 03:56:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:32 Aux= 03:56:32 Message to Camera, serial 75180 queued 03:57:08 Received message from Master: op=PointingHead serial=75192 03:57:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:57:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:57:09 Point started: ret=0 03:57:09 point_skyscan result=0 03:57:09 Check angles 03:57:09 SkyScan query 03:57:10 SkyScan query done: ret=0 az=153.12<-10208 ze=6.51<-11566 Statuses=0009 0008 03:57:10 Msec=0 True Az=153.12 Ze=6.51 Az status=0009 Ze status=0008 03:57:10 Check angles 03:57:10 SkyScan query 03:57:11 SkyScan query done: ret=0 az=135.21<-9014 ze=6.495<-11567 Statuses=0009 0008 03:57:11 Msec=750 True Az=135.21 Ze=6.495 Az status=0009 Ze status=0008 03:57:11 Check angles 03:57:11 SkyScan query 03:57:11 SkyScan query done: ret=0 az=117.69<-7846 ze=6.495<-11567 Statuses=0009 0008 03:57:11 Msec=1500 True Az=117.69 Ze=6.495 Az status=0009 Ze status=0008 03:57:12 Check angles 03:57:12 SkyScan query 03:57:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:57:12 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:57:12 Message to Master queued w/err=0: serial=75192 error=0 03:57:17 Received message from Master: op=Filter serial=75193 03:57:17 Color wheel filter change from 0 to 0 03:57:17 FLIGetFilterPos err=0 currentPosition=0 03:57:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:17 Filter is already there-color wheel unchanged 03:57:17 Received message from Master: op=Shutter serial=75194 03:57:17 Shutter LASER close 03:57:17 Received message from Camera: op=State serial=75196 03:57:17 GetSingleValue result=40 Value=cccccccc 03:57:17 SkyScan query 03:57:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:57:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:18 Parameters OK 03:57:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:18 Set A/D data flow result=40 03:57:18 Set A/D channel type result=40 03:57:18 Set A/D encoding result=40 03:57:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:18 Set channel filter=0.000000e+000 result=40 03:57:18 Config A/D Result=40 03:57:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:18 Get A/D filter: -9.255963e+061 result=40 03:57:18 Get A/D value=-858993460 result=40 03:57:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:18 Parameters OK 03:57:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:18 Set A/D data flow result=40 03:57:18 Set A/D channel type result=40 03:57:18 Set A/D encoding result=40 03:57:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:18 Set channel filter=0.000000e+000 result=40 03:57:18 Config A/D Result=40 03:57:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:18 Get A/D filter: -9.255963e+061 result=40 03:57:18 Get A/D value=-858993460 result=40 03:57:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:18 Aux= 03:57:18 Message to Camera, serial 75196 queued 03:57:55 Received message from Master: op=PointingHead serial=75209 03:57:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:57:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:57:55 Point started: ret=0 03:57:55 point_skyscan result=0 03:57:56 Check angles 03:57:56 SkyScan query 03:57:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 03:57:56 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 03:57:57 Check angles 03:57:57 SkyScan query 03:57:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.835<-14989 Statuses=0008 0009 03:57:57 Msec=750 True Az=112.995 Ze=-44.835 Az status=0008 Ze status=0009 03:57:57 Check angles 03:57:57 SkyScan query 03:57:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.21<-16414 Statuses=0008 0009 03:57:58 Msec=1500 True Az=112.995 Ze=-66.21 Az status=0008 Ze status=0009 03:57:58 Check angles 03:57:58 SkyScan query 03:57:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.6<-17840 Statuses=0008 0009 03:57:59 Msec=2250 True Az=112.995 Ze=-87.6 Az status=0008 Ze status=0009 03:57:59 Check angles 03:57:59 SkyScan query 03:58:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.54<-19236 Statuses=0008 0009 03:58:00 Msec=3000 True Az=112.995 Ze=-108.54 Az status=0008 Ze status=0009 03:58:00 Check angles 03:58:00 SkyScan query 03:58:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.495<-20633 Statuses=0008 0009 03:58:00 Msec=3750 True Az=112.995 Ze=-129.495 Az status=0008 Ze status=0009 03:58:00 Check angles 03:58:00 SkyScan query 03:58:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.45<-22030 Statuses=0008 0009 03:58:01 Msec=4500 True Az=112.995 Ze=-150.45 Az status=0008 Ze status=0009 03:58:01 Check angles 03:58:01 SkyScan query 03:58:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.225<-23415 Statuses=0008 0009 03:58:02 Msec=5250 True Az=112.995 Ze=-171.225 Az status=0008 Ze status=0009 03:58:02 Check angles 03:58:02 SkyScan query 03:58:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:58:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:58:03 Message to Master queued w/err=0: serial=75209 error=0 03:58:08 Received message from Master: op=Filter serial=75210 03:58:08 Color wheel filter change from 0 to 0 03:58:08 FLIGetFilterPos err=0 currentPosition=0 03:58:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:08 Filter is already there-color wheel unchanged 03:58:08 Received message from Master: op=Shutter serial=75211 03:58:08 Shutter LASER open 03:58:08 Received message from Camera: op=State serial=75213 03:58:08 GetSingleValue result=40 Value=cccccccc 03:58:08 SkyScan query 03:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:58:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:08 Parameters OK 03:58:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:08 Set A/D data flow result=40 03:58:08 Set A/D channel type result=40 03:58:08 Set A/D encoding result=40 03:58:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:08 Set channel filter=0.000000e+000 result=40 03:58:08 Config A/D Result=40 03:58:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:08 Get A/D filter: -9.255963e+061 result=40 03:58:08 Get A/D value=-858993460 result=40 03:58:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:08 Parameters OK 03:58:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:08 Set A/D data flow result=40 03:58:08 Set A/D channel type result=40 03:58:08 Set A/D encoding result=40 03:58:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:08 Set channel filter=0.000000e+000 result=40 03:58:08 Config A/D Result=40 03:58:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:08 Get A/D filter: -9.255963e+061 result=40 03:58:08 Get A/D value=-858993460 result=40 03:58:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:08 Aux= 03:58:08 Message to Camera, serial 75213 queued 03:58:17 Received message from Master: op=Shutter serial=75223 03:58:17 Shutter LASER close 03:58:17 Received message from Master: op=PointingHead serial=75227 03:58:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:58:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:58:18 Point started: ret=0 03:58:18 point_skyscan result=0 03:58:18 Check angles 03:58:18 SkyScan query 03:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 03:58:19 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 03:58:19 Check angles 03:58:19 SkyScan query 03:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 03:58:20 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 03:58:20 Check angles 03:58:20 SkyScan query 03:58:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 03:58:21 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 03:58:21 Check angles 03:58:21 SkyScan query 03:58:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.53<-17302 Statuses=0008 0009 03:58:21 Msec=2250 True Az=112.995 Ze=-79.53 Az status=0008 Ze status=0009 03:58:21 Check angles 03:58:21 SkyScan query 03:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 03:58:22 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 03:58:22 Check angles 03:58:22 SkyScan query 03:58:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 03:58:23 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 03:58:23 Check angles 03:58:23 SkyScan query 03:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.665<-13111 Statuses=0008 0009 03:58:24 Msec=4500 True Az=112.995 Ze=-16.665 Az status=0008 Ze status=0009 03:58:24 Check angles 03:58:24 SkyScan query 03:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.245<-11717 Statuses=0008 0009 03:58:24 Msec=5250 True Az=112.995 Ze=4.245 Az status=0008 Ze status=0009 03:58:24 Check angles 03:58:24 SkyScan query 03:58:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:58:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:58:25 Message to Master queued w/err=0: serial=75227 error=0 03:58:30 Received message from Master: op=Filter serial=75228 03:58:30 Color wheel filter change from 0 to 0 03:58:30 FLIGetFilterPos err=0 currentPosition=0 03:58:30 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:30 Filter is already there-color wheel unchanged 03:58:30 Received message from Master: op=Shutter serial=75229 03:58:30 Shutter LASER close 03:58:30 Received message from Camera: op=State serial=75231 03:58:30 GetSingleValue result=40 Value=cccccccc 03:58:30 SkyScan query 03:58:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:58:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:31 Parameters OK 03:58:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:31 Set A/D data flow result=40 03:58:31 Set A/D channel type result=40 03:58:31 Set A/D encoding result=40 03:58:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:31 Set channel filter=0.000000e+000 result=40 03:58:31 Config A/D Result=40 03:58:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:31 Get A/D filter: -9.255963e+061 result=40 03:58:31 Get A/D value=-858993460 result=40 03:58:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:31 Parameters OK 03:58:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:31 Set A/D data flow result=40 03:58:31 Set A/D channel type result=40 03:58:31 Set A/D encoding result=40 03:58:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:31 Set channel filter=0.000000e+000 result=40 03:58:31 Config A/D Result=40 03:58:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:31 Get A/D filter: -9.255963e+061 result=40 03:58:31 Get A/D value=-858993460 result=40 03:58:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:31 Aux= 03:58:31 Message to Camera, serial 75231 queued 03:59:08 Received message from Master: op=PointingHead serial=75244 03:59:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:59:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:59:08 Point started: ret=0 03:59:08 point_skyscan result=0 03:59:09 Check angles 03:59:09 SkyScan query 03:59:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:59:09 Message to Master queued w/err=0: serial=75244 error=0 03:59:14 Received message from Master: op=Filter serial=75245 03:59:14 Color wheel filter change from 0 to 0 03:59:14 FLIGetFilterPos err=0 currentPosition=0 03:59:14 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:14 Filter is already there-color wheel unchanged 03:59:15 Received message from Master: op=Shutter serial=75246 03:59:15 Shutter LASER close 03:59:15 Received message from Camera: op=State serial=75248 03:59:15 GetSingleValue result=40 Value=cccccccc 03:59:15 SkyScan query 03:59:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:15 Parameters OK 03:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:15 Set A/D data flow result=40 03:59:15 Set A/D channel type result=40 03:59:15 Set A/D encoding result=40 03:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:15 Set channel filter=0.000000e+000 result=40 03:59:15 Config A/D Result=40 03:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:15 Get A/D filter: -9.255963e+061 result=40 03:59:15 Get A/D value=-858993460 result=40 03:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:15 Parameters OK 03:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:15 Set A/D data flow result=40 03:59:15 Set A/D channel type result=40 03:59:15 Set A/D encoding result=40 03:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:15 Set channel filter=0.000000e+000 result=40 03:59:15 Config A/D Result=40 03:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:15 Get A/D filter: -9.255963e+061 result=40 03:59:15 Get A/D value=-858993460 result=40 03:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:15 Aux= 03:59:15 Message to Camera, serial 75248 queued 03:59:52 Received message from Master: op=PointingHead serial=75261 03:59:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:59:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:59:52 Point started: ret=0 03:59:52 point_skyscan result=0 03:59:53 Check angles 03:59:53 SkyScan query 03:59:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:59:54 Message to Master queued w/err=0: serial=75261 error=0 03:59:59 Received message from Master: op=Filter serial=75262 03:59:59 Color wheel filter change from 0 to 0 03:59:59 FLIGetFilterPos err=0 currentPosition=0 03:59:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:59 Filter is already there-color wheel unchanged 03:59:59 Received message from Master: op=Shutter serial=75263 03:59:59 Shutter LASER close 03:59:59 Received message from Camera: op=State serial=75265 03:59:59 GetSingleValue result=40 Value=cccccccc 03:59:59 SkyScan query 04:00:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:00:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:00 Parameters OK 04:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:00 Set A/D data flow result=40 04:00:00 Set A/D channel type result=40 04:00:00 Set A/D encoding result=40 04:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:00 Set channel filter=0.000000e+000 result=40 04:00:00 Config A/D Result=40 04:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:00 Get A/D filter: -9.255963e+061 result=40 04:00:00 Get A/D value=-858993460 result=40 04:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:00 Parameters OK 04:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:00 Set A/D data flow result=40 04:00:00 Set A/D channel type result=40 04:00:00 Set A/D encoding result=40 04:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:00 Set channel filter=0.000000e+000 result=40 04:00:00 Config A/D Result=40 04:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:00 Get A/D filter: -9.255963e+061 result=40 04:00:00 Get A/D value=-858993460 result=40 04:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:00 Aux= 04:00:00 Message to Camera, serial 75265 queued 04:00:36 Received message from Master: op=PointingHead serial=75278 04:00:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:00:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:00:37 Point started: ret=0 04:00:37 point_skyscan result=0 04:00:38 Check angles 04:00:38 SkyScan query 04:00:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:00:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:00:38 Message to Master queued w/err=0: serial=75278 error=0 04:00:43 Received message from Master: op=Filter serial=75279 04:00:43 Color wheel filter change from 0 to 0 04:00:43 FLIGetFilterPos err=0 currentPosition=0 04:00:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:43 Filter is already there-color wheel unchanged 04:00:43 Received message from Master: op=Shutter serial=75280 04:00:43 Shutter LASER close 04:00:43 Received message from Camera: op=State serial=75282 04:00:43 GetSingleValue result=40 Value=cccccccc 04:00:43 SkyScan query 04:00:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:00:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:44 Parameters OK 04:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:44 Set A/D data flow result=40 04:00:44 Set A/D channel type result=40 04:00:44 Set A/D encoding result=40 04:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:44 Set channel filter=0.000000e+000 result=40 04:00:44 Config A/D Result=40 04:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:44 Get A/D filter: -9.255963e+061 result=40 04:00:44 Get A/D value=-858993460 result=40 04:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:44 Parameters OK 04:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:44 Set A/D data flow result=40 04:00:44 Set A/D channel type result=40 04:00:44 Set A/D encoding result=40 04:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:44 Set channel filter=0.000000e+000 result=40 04:00:44 Config A/D Result=40 04:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:44 Get A/D filter: -9.255963e+061 result=40 04:00:44 Get A/D value=-858993460 result=40 04:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:44 Aux= 04:00:44 Message to Camera, serial 75282 queued 04:01:21 Received message from Master: op=PointingHead serial=75295 04:01:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:01:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:01:21 Point started: ret=0 04:01:21 point_skyscan result=0 04:01:22 Check angles 04:01:22 SkyScan query 04:01:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 04:01:22 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 04:01:23 Check angles 04:01:23 SkyScan query 04:01:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 04:01:23 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 04:01:23 Check angles 04:01:23 SkyScan query 04:01:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.31<-16354 Statuses=0008 0009 04:01:24 Msec=1500 True Az=112.995 Ze=-65.31 Az status=0008 Ze status=0009 04:01:24 Check angles 04:01:24 SkyScan query 04:01:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.265<-17751 Statuses=0008 0009 04:01:25 Msec=2250 True Az=112.995 Ze=-86.265 Az status=0008 Ze status=0009 04:01:25 Check angles 04:01:25 SkyScan query 04:01:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.22<-19148 Statuses=0008 0009 04:01:25 Msec=3000 True Az=112.995 Ze=-107.22 Az status=0008 Ze status=0009 04:01:26 Check angles 04:01:26 SkyScan query 04:01:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.175<-20545 Statuses=0008 0009 04:01:26 Msec=3750 True Az=112.995 Ze=-128.175 Az status=0008 Ze status=0009 04:01:26 Check angles 04:01:26 SkyScan query 04:01:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.565<-21971 Statuses=0008 0009 04:01:27 Msec=4500 True Az=112.995 Ze=-149.565 Az status=0008 Ze status=0009 04:01:27 Check angles 04:01:27 SkyScan query 04:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.49<-23366 Statuses=0008 0009 04:01:28 Msec=5250 True Az=112.995 Ze=-170.49 Az status=0008 Ze status=0009 04:01:28 Check angles 04:01:28 SkyScan query 04:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:01:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:01:28 Message to Master queued w/err=0: serial=75295 error=0 04:01:33 Received message from Master: op=Filter serial=75296 04:01:33 Color wheel filter change from 0 to 0 04:01:33 FLIGetFilterPos err=0 currentPosition=0 04:01:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:33 Filter is already there-color wheel unchanged 04:01:34 Received message from Master: op=Shutter serial=75297 04:01:34 Shutter LASER open 04:01:34 Received message from Camera: op=State serial=75299 04:01:34 GetSingleValue result=40 Value=cccccccc 04:01:34 SkyScan query 04:01:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:01:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:34 Parameters OK 04:01:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:34 Set A/D data flow result=40 04:01:34 Set A/D channel type result=40 04:01:34 Set A/D encoding result=40 04:01:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:34 Set channel filter=0.000000e+000 result=40 04:01:34 Config A/D Result=40 04:01:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:34 Get A/D filter: -9.255963e+061 result=40 04:01:34 Get A/D value=-858993460 result=40 04:01:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:34 Parameters OK 04:01:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:34 Set A/D data flow result=40 04:01:34 Set A/D channel type result=40 04:01:34 Set A/D encoding result=40 04:01:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:34 Set channel filter=0.000000e+000 result=40 04:01:34 Config A/D Result=40 04:01:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:34 Get A/D filter: -9.255963e+061 result=40 04:01:34 Get A/D value=-858993460 result=40 04:01:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:34 Aux= 04:01:34 Message to Camera, serial 75299 queued 04:01:42 Received message from Master: op=Shutter serial=75308 04:01:42 Shutter LASER close 04:01:42 Received message from Master: op=PointingHead serial=75312 04:01:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:01:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:01:43 Point started: ret=0 04:01:43 point_skyscan result=0 04:01:44 Check angles 04:01:44 SkyScan query 04:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 04:01:44 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 04:01:44 Check angles 04:01:44 SkyScan query 04:01:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 04:01:45 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 04:01:45 Check angles 04:01:45 SkyScan query 04:01:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 04:01:46 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 04:01:46 Check angles 04:01:46 SkyScan query 04:01:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.475<-17365 Statuses=0008 0009 04:01:46 Msec=2250 True Az=112.995 Ze=-80.475 Az status=0008 Ze status=0009 04:01:47 Check angles 04:01:47 SkyScan query 04:01:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.535<-15969 Statuses=0008 0009 04:01:47 Msec=3000 True Az=112.995 Ze=-59.535 Az status=0008 Ze status=0009 04:01:47 Check angles 04:01:47 SkyScan query 04:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.58<-14572 Statuses=0008 0009 04:01:48 Msec=3750 True Az=112.995 Ze=-38.58 Az status=0008 Ze status=0009 04:01:48 Check angles 04:01:48 SkyScan query 04:01:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.625<-13175 Statuses=0008 0009 04:01:49 Msec=4500 True Az=112.995 Ze=-17.625 Az status=0008 Ze status=0009 04:01:49 Check angles 04:01:49 SkyScan query 04:01:49 SkyScan query done: ret=0 az=112.995<-7533 ze=3.315<-11779 Statuses=0008 0009 04:01:49 Msec=5250 True Az=112.995 Ze=3.315 Az status=0008 Ze status=0009 04:01:50 Check angles 04:01:50 SkyScan query 04:01:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:01:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:01:50 Message to Master queued w/err=0: serial=75312 error=0 04:01:55 Received message from Master: op=Filter serial=75313 04:01:55 Color wheel filter change from 0 to 0 04:01:55 FLIGetFilterPos err=0 currentPosition=0 04:01:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:55 Filter is already there-color wheel unchanged 04:01:55 Received message from Master: op=Shutter serial=75314 04:01:55 Shutter LASER close 04:01:55 Received message from Camera: op=State serial=75316 04:01:55 GetSingleValue result=40 Value=cccccccc 04:01:55 SkyScan query 04:01:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:01:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:56 Parameters OK 04:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:56 Set A/D data flow result=40 04:01:56 Set A/D channel type result=40 04:01:56 Set A/D encoding result=40 04:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:56 Set channel filter=0.000000e+000 result=40 04:01:56 Config A/D Result=40 04:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:56 Get A/D filter: -9.255963e+061 result=40 04:01:56 Get A/D value=-858993460 result=40 04:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:56 Parameters OK 04:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:56 Set A/D data flow result=40 04:01:56 Set A/D channel type result=40 04:01:56 Set A/D encoding result=40 04:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:56 Set channel filter=0.000000e+000 result=40 04:01:56 Config A/D Result=40 04:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:56 Get A/D filter: -9.255963e+061 result=40 04:01:56 Get A/D value=-858993460 result=40 04:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:56 Aux= 04:01:56 Message to Camera, serial 75316 queued 04:02:33 Received message from Master: op=PointingHead serial=75329 04:02:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:02:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:02:33 Point started: ret=0 04:02:33 point_skyscan result=0 04:02:34 Check angles 04:02:34 SkyScan query 04:02:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:02:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:02:35 Message to Master queued w/err=0: serial=75329 error=0 04:02:40 Received message from Master: op=Filter serial=75330 04:02:40 Color wheel filter change from 0 to 0 04:02:40 FLIGetFilterPos err=0 currentPosition=0 04:02:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:40 Filter is already there-color wheel unchanged 04:02:40 Received message from Master: op=Shutter serial=75331 04:02:40 Shutter LASER close 04:02:40 Received message from Camera: op=State serial=75333 04:02:40 GetSingleValue result=40 Value=cccccccc 04:02:40 SkyScan query 04:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:02:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:40 Parameters OK 04:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:40 Set A/D data flow result=40 04:02:40 Set A/D channel type result=40 04:02:40 Set A/D encoding result=40 04:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:40 Set channel filter=0.000000e+000 result=40 04:02:40 Config A/D Result=40 04:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:40 Get A/D filter: -9.255963e+061 result=40 04:02:40 Get A/D value=-858993460 result=40 04:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:40 Parameters OK 04:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:40 Set A/D data flow result=40 04:02:40 Set A/D channel type result=40 04:02:40 Set A/D encoding result=40 04:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:40 Set channel filter=0.000000e+000 result=40 04:02:40 Config A/D Result=40 04:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:40 Get A/D filter: -9.255963e+061 result=40 04:02:40 Get A/D value=-858993460 result=40 04:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:40 Aux= 04:02:40 Message to Camera, serial 75333 queued 04:03:17 Received message from Master: op=PointingHead serial=75346 04:03:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:03:17 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:03:17 Point started: ret=0 04:03:17 point_skyscan result=0 04:03:18 Check angles 04:03:18 SkyScan query 04:03:19 SkyScan query done: ret=0 az=136.08<-9072 ze=-6.51<-12434 Statuses=0009 0008 04:03:19 Msec=0 True Az=136.08 Ze=-6.51 Az status=0009 Ze status=0008 04:03:19 Check angles 04:03:19 SkyScan query 04:03:20 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.495<-12433 Statuses=0009 0008 04:03:20 Msec=750 True Az=153.6 Ze=-6.495 Az status=0009 Ze status=0008 04:03:20 Check angles 04:03:20 SkyScan query 04:03:20 SkyScan query done: ret=0 az=171<-11400 ze=-6.495<-12433 Statuses=0009 0008 04:03:20 Msec=1500 True Az=171 Ze=-6.495 Az status=0009 Ze status=0008 04:03:20 Check angles 04:03:20 SkyScan query 04:03:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:03:21 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:03:21 Message to Master queued w/err=0: serial=75346 error=0 04:03:26 Received message from Master: op=Filter serial=75347 04:03:26 Color wheel filter change from 0 to 0 04:03:26 FLIGetFilterPos err=0 currentPosition=0 04:03:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:26 Filter is already there-color wheel unchanged 04:03:26 Received message from Master: op=Shutter serial=75348 04:03:26 Shutter LASER close 04:03:26 Received message from Camera: op=State serial=75350 04:03:26 GetSingleValue result=40 Value=cccccccc 04:03:26 SkyScan query 04:03:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:03:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:27 Parameters OK 04:03:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:27 Set A/D data flow result=40 04:03:27 Set A/D channel type result=40 04:03:27 Set A/D encoding result=40 04:03:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:27 Set channel filter=0.000000e+000 result=40 04:03:27 Config A/D Result=40 04:03:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:27 Get A/D filter: -9.255963e+061 result=40 04:03:27 Get A/D value=-858993460 result=40 04:03:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:27 Parameters OK 04:03:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:27 Set A/D data flow result=40 04:03:27 Set A/D channel type result=40 04:03:27 Set A/D encoding result=40 04:03:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:27 Set channel filter=0.000000e+000 result=40 04:03:27 Config A/D Result=40 04:03:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:27 Get A/D filter: -9.255963e+061 result=40 04:03:27 Get A/D value=-858993460 result=40 04:03:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:27 Aux= 04:03:27 Message to Camera, serial 75350 queued 04:03:38 Received message from Master: op=Identify serial=75351 [UTC 2019-3-3 04:03:50] 04:04:04 Received message from Master: op=PointingHead serial=75366 04:04:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:04:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:04:04 Point started: ret=0 04:04:04 point_skyscan result=0 04:04:05 Check angles 04:04:05 SkyScan query 04:04:05 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 04:04:05 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 04:04:06 Check angles 04:04:06 SkyScan query 04:04:06 SkyScan query done: ret=0 az=135.24<-9016 ze=6.495<-11567 Statuses=0009 0008 04:04:06 Msec=750 True Az=135.24 Ze=6.495 Az status=0009 Ze status=0008 04:04:06 Check angles 04:04:06 SkyScan query 04:04:07 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 04:04:07 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 04:04:07 Check angles 04:04:07 SkyScan query 04:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:04:08 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:04:08 Message to Master queued w/err=0: serial=75366 error=0 04:04:13 Received message from Master: op=Filter serial=75367 04:04:13 Color wheel filter change from 0 to 0 04:04:13 FLIGetFilterPos err=0 currentPosition=0 04:04:13 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:13 Filter is already there-color wheel unchanged 04:04:13 Received message from Master: op=Shutter serial=75368 04:04:13 Shutter LASER close 04:04:13 Received message from Camera: op=State serial=75370 04:04:13 GetSingleValue result=40 Value=cccccccc 04:04:13 SkyScan query 04:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:04:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:13 Parameters OK 04:04:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:13 Set A/D data flow result=40 04:04:13 Set A/D channel type result=40 04:04:13 Set A/D encoding result=40 04:04:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:13 Set channel filter=0.000000e+000 result=40 04:04:13 Config A/D Result=40 04:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:13 Get A/D filter: -9.255963e+061 result=40 04:04:13 Get A/D value=-858993460 result=40 04:04:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:13 Parameters OK 04:04:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:13 Set A/D data flow result=40 04:04:13 Set A/D channel type result=40 04:04:13 Set A/D encoding result=40 04:04:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:13 Set channel filter=0.000000e+000 result=40 04:04:13 Config A/D Result=40 04:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:13 Get A/D filter: -9.255963e+061 result=40 04:04:13 Get A/D value=-858993460 result=40 04:04:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:13 Aux= 04:04:13 Message to Camera, serial 75370 queued 04:04:50 Received message from Master: op=PointingHead serial=75383 04:04:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:04:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:04:51 Point started: ret=0 04:04:51 point_skyscan result=0 04:04:51 Check angles 04:04:51 SkyScan query 04:04:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 04:04:52 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 04:04:52 Check angles 04:04:52 SkyScan query 04:04:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 04:04:53 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 04:04:53 Check angles 04:04:53 SkyScan query 04:04:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 04:04:53 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 04:04:54 Check angles 04:04:54 SkyScan query 04:04:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.865<-17791 Statuses=0008 0009 04:04:54 Msec=2250 True Az=112.995 Ze=-86.865 Az status=0008 Ze status=0009 04:04:54 Check angles 04:04:54 SkyScan query 04:04:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.27<-19218 Statuses=0008 0009 04:04:55 Msec=3000 True Az=112.995 Ze=-108.27 Az status=0008 Ze status=0009 04:04:55 Check angles 04:04:55 SkyScan query 04:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.225<-20615 Statuses=0008 0009 04:04:56 Msec=3750 True Az=112.995 Ze=-129.225 Az status=0008 Ze status=0009 04:04:56 Check angles 04:04:56 SkyScan query 04:04:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.18<-22012 Statuses=0008 0009 04:04:57 Msec=4500 True Az=112.995 Ze=-150.18 Az status=0008 Ze status=0009 04:04:57 Check angles 04:04:57 SkyScan query 04:04:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171<-23400 Statuses=0008 0009 04:04:57 Msec=5250 True Az=112.995 Ze=-171 Az status=0008 Ze status=0009 04:04:57 Check angles 04:04:57 SkyScan query 04:04:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:04:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:04:58 Message to Master queued w/err=0: serial=75383 error=0 04:05:03 Received message from Master: op=Filter serial=75384 04:05:03 Color wheel filter change from 0 to 0 04:05:03 FLIGetFilterPos err=0 currentPosition=0 04:05:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:03 Filter is already there-color wheel unchanged 04:05:03 Received message from Master: op=Shutter serial=75385 04:05:03 Shutter LASER open 04:05:03 Received message from Camera: op=State serial=75387 04:05:03 GetSingleValue result=40 Value=cccccccc 04:05:03 SkyScan query 04:05:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:05:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:04 Parameters OK 04:05:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:04 Set A/D data flow result=40 04:05:04 Set A/D channel type result=40 04:05:04 Set A/D encoding result=40 04:05:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:04 Set channel filter=0.000000e+000 result=40 04:05:04 Config A/D Result=40 04:05:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:04 Get A/D filter: -9.255963e+061 result=40 04:05:04 Get A/D value=-858993460 result=40 04:05:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:04 Parameters OK 04:05:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:04 Set A/D data flow result=40 04:05:04 Set A/D channel type result=40 04:05:04 Set A/D encoding result=40 04:05:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:04 Set channel filter=0.000000e+000 result=40 04:05:04 Config A/D Result=40 04:05:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:04 Get A/D filter: -9.255963e+061 result=40 04:05:04 Get A/D value=-858993460 result=40 04:05:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:04 Aux= 04:05:04 Message to Camera, serial 75387 queued 04:05:12 Received message from Master: op=Shutter serial=75397 04:05:12 Shutter LASER close 04:05:13 Received message from Master: op=PointingHead serial=75401 04:05:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:05:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:05:13 Point started: ret=0 04:05:13 point_skyscan result=0 04:05:14 Check angles 04:05:14 SkyScan query 04:05:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 04:05:14 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 04:05:15 Check angles 04:05:15 SkyScan query 04:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 04:05:15 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 04:05:15 Check angles 04:05:15 SkyScan query 04:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 04:05:16 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 04:05:16 Check angles 04:05:16 SkyScan query 04:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.92<-17328 Statuses=0008 0009 04:05:17 Msec=2250 True Az=112.995 Ze=-79.92 Az status=0008 Ze status=0009 04:05:17 Check angles 04:05:17 SkyScan query 04:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.98<-15932 Statuses=0008 0009 04:05:17 Msec=3000 True Az=112.995 Ze=-58.98 Az status=0008 Ze status=0009 04:05:18 Check angles 04:05:18 SkyScan query 04:05:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.575<-14505 Statuses=0008 0009 04:05:18 Msec=3750 True Az=112.995 Ze=-37.575 Az status=0008 Ze status=0009 04:05:18 Check angles 04:05:18 SkyScan query 04:05:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 04:05:19 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 04:05:19 Check angles 04:05:19 SkyScan query 04:05:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.305<-11713 Statuses=0008 0009 04:05:20 Msec=5250 True Az=112.995 Ze=4.305 Az status=0008 Ze status=0009 04:05:20 Check angles 04:05:20 SkyScan query 04:05:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:05:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:05:21 Message to Master queued w/err=0: serial=75401 error=0 04:05:26 Received message from Master: op=Filter serial=75402 04:05:26 Color wheel filter change from 0 to 0 04:05:26 FLIGetFilterPos err=0 currentPosition=0 04:05:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:26 Filter is already there-color wheel unchanged 04:05:26 Received message from Master: op=Shutter serial=75403 04:05:26 Shutter LASER close 04:05:26 Received message from Camera: op=State serial=75405 04:05:26 GetSingleValue result=40 Value=cccccccc 04:05:26 SkyScan query 04:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:05:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:26 Parameters OK 04:05:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:26 Set A/D data flow result=40 04:05:26 Set A/D channel type result=40 04:05:26 Set A/D encoding result=40 04:05:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:26 Set channel filter=0.000000e+000 result=40 04:05:26 Config A/D Result=40 04:05:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:26 Get A/D filter: -9.255963e+061 result=40 04:05:26 Get A/D value=-858993460 result=40 04:05:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:26 Parameters OK 04:05:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:26 Set A/D data flow result=40 04:05:26 Set A/D channel type result=40 04:05:26 Set A/D encoding result=40 04:05:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:26 Set channel filter=0.000000e+000 result=40 04:05:26 Config A/D Result=40 04:05:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:26 Get A/D filter: -9.255963e+061 result=40 04:05:26 Get A/D value=-858993460 result=40 04:05:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:26 Aux= 04:05:26 Message to Camera, serial 75405 queued 04:06:03 Received message from Master: op=PointingHead serial=75418 04:06:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:06:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:06:04 Point started: ret=0 04:06:04 point_skyscan result=0 04:06:04 Check angles 04:06:04 SkyScan query 04:06:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:06:05 Message to Master queued w/err=0: serial=75418 error=0 04:06:10 Received message from Master: op=Filter serial=75419 04:06:10 Color wheel filter change from 0 to 0 04:06:10 FLIGetFilterPos err=0 currentPosition=0 04:06:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:10 Filter is already there-color wheel unchanged 04:06:10 Received message from Master: op=Shutter serial=75420 04:06:10 Shutter LASER close 04:06:10 Received message from Camera: op=State serial=75422 04:06:10 GetSingleValue result=40 Value=cccccccc 04:06:10 SkyScan query 04:06:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:11 Parameters OK 04:06:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:11 Set A/D data flow result=40 04:06:11 Set A/D channel type result=40 04:06:11 Set A/D encoding result=40 04:06:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:11 Set channel filter=0.000000e+000 result=40 04:06:11 Config A/D Result=40 04:06:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:11 Get A/D filter: -9.255963e+061 result=40 04:06:11 Get A/D value=-858993460 result=40 04:06:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:11 Parameters OK 04:06:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:11 Set A/D data flow result=40 04:06:11 Set A/D channel type result=40 04:06:11 Set A/D encoding result=40 04:06:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:11 Set channel filter=0.000000e+000 result=40 04:06:11 Config A/D Result=40 04:06:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:11 Get A/D filter: -9.255963e+061 result=40 04:06:11 Get A/D value=-858993460 result=40 04:06:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:11 Aux= 04:06:11 Message to Camera, serial 75422 queued 04:06:48 Received message from Master: op=PointingHead serial=75435 04:06:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:06:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:06:48 Point started: ret=0 04:06:48 point_skyscan result=0 04:06:49 Check angles 04:06:49 SkyScan query 04:06:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:06:49 Message to Master queued w/err=0: serial=75435 error=0 04:06:54 Received message from Master: op=Filter serial=75436 04:06:54 Color wheel filter change from 0 to 0 04:06:54 FLIGetFilterPos err=0 currentPosition=0 04:06:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:54 Filter is already there-color wheel unchanged 04:06:54 Received message from Master: op=Shutter serial=75437 04:06:54 Shutter LASER close 04:06:54 Received message from Camera: op=State serial=75439 04:06:54 GetSingleValue result=40 Value=cccccccc 04:06:54 SkyScan query 04:06:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:55 Parameters OK 04:06:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:55 Set A/D data flow result=40 04:06:55 Set A/D channel type result=40 04:06:55 Set A/D encoding result=40 04:06:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:55 Set channel filter=0.000000e+000 result=40 04:06:55 Config A/D Result=40 04:06:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:55 Get A/D filter: -9.255963e+061 result=40 04:06:55 Get A/D value=-858993460 result=40 04:06:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:55 Parameters OK 04:06:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:55 Set A/D data flow result=40 04:06:55 Set A/D channel type result=40 04:06:55 Set A/D encoding result=40 04:06:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:55 Set channel filter=0.000000e+000 result=40 04:06:55 Config A/D Result=40 04:06:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:55 Get A/D filter: -9.255963e+061 result=40 04:06:55 Get A/D value=-858993460 result=40 04:06:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:55 Aux= 04:06:55 Message to Camera, serial 75439 queued 04:07:32 Received message from Master: op=PointingHead serial=75452 04:07:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:07:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:07:32 Point started: ret=0 04:07:32 point_skyscan result=0 04:07:33 Check angles 04:07:33 SkyScan query 04:07:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:07:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:07:34 Message to Master queued w/err=0: serial=75452 error=0 04:07:39 Received message from Master: op=Filter serial=75453 04:07:39 Color wheel filter change from 0 to 0 04:07:39 FLIGetFilterPos err=0 currentPosition=0 04:07:39 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:39 Filter is already there-color wheel unchanged 04:07:39 Received message from Master: op=Shutter serial=75454 04:07:39 Shutter LASER close 04:07:39 Received message from Camera: op=State serial=75456 04:07:39 GetSingleValue result=40 Value=cccccccc 04:07:39 SkyScan query 04:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:07:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:39 Parameters OK 04:07:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:39 Set A/D data flow result=40 04:07:39 Set A/D channel type result=40 04:07:39 Set A/D encoding result=40 04:07:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:39 Set channel filter=0.000000e+000 result=40 04:07:39 Config A/D Result=40 04:07:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:39 Get A/D filter: -9.255963e+061 result=40 04:07:39 Get A/D value=-858993460 result=40 04:07:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:39 Parameters OK 04:07:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:39 Set A/D data flow result=40 04:07:39 Set A/D channel type result=40 04:07:39 Set A/D encoding result=40 04:07:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:39 Set channel filter=0.000000e+000 result=40 04:07:39 Config A/D Result=40 04:07:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:39 Get A/D filter: -9.255963e+061 result=40 04:07:39 Get A/D value=-858993460 result=40 04:07:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:39 Aux= 04:07:39 Message to Camera, serial 75456 queued 04:08:16 Received message from Master: op=PointingHead serial=75469 04:08:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:08:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:08:16 Point started: ret=0 04:08:16 point_skyscan result=0 04:08:17 Check angles 04:08:17 SkyScan query 04:08:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 04:08:18 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 04:08:18 Check angles 04:08:18 SkyScan query 04:08:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 04:08:19 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 04:08:19 Check angles 04:08:19 SkyScan query 04:08:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.31<-16354 Statuses=0008 0009 04:08:19 Msec=1500 True Az=112.995 Ze=-65.31 Az status=0008 Ze status=0009 04:08:19 Check angles 04:08:19 SkyScan query 04:08:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.265<-17751 Statuses=0008 0009 04:08:20 Msec=2250 True Az=112.995 Ze=-86.265 Az status=0008 Ze status=0009 04:08:20 Check angles 04:08:20 SkyScan query 04:08:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.235<-19149 Statuses=0008 0009 04:08:21 Msec=3000 True Az=112.995 Ze=-107.235 Az status=0008 Ze status=0009 04:08:21 Check angles 04:08:21 SkyScan query 04:08:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.175<-20545 Statuses=0008 0009 04:08:22 Msec=3750 True Az=112.995 Ze=-128.175 Az status=0008 Ze status=0009 04:08:22 Check angles 04:08:22 SkyScan query 04:08:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.13<-21942 Statuses=0008 0009 04:08:22 Msec=4500 True Az=112.995 Ze=-149.13 Az status=0008 Ze status=0009 04:08:22 Check angles 04:08:22 SkyScan query 04:08:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.07<-23338 Statuses=0008 0009 04:08:23 Msec=5250 True Az=112.995 Ze=-170.07 Az status=0008 Ze status=0009 04:08:23 Check angles 04:08:23 SkyScan query 04:08:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:08:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:08:24 Message to Master queued w/err=0: serial=75469 error=0 04:08:29 Received message from Master: op=Filter serial=75470 04:08:29 Color wheel filter change from 0 to 0 04:08:29 FLIGetFilterPos err=0 currentPosition=0 04:08:29 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:29 Filter is already there-color wheel unchanged 04:08:29 Received message from Master: op=Shutter serial=75471 04:08:29 Shutter LASER open 04:08:29 Received message from Camera: op=State serial=75473 04:08:29 GetSingleValue result=40 Value=cccccccc 04:08:29 SkyScan query 04:08:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:08:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:30 Parameters OK 04:08:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:30 Set A/D data flow result=40 04:08:30 Set A/D channel type result=40 04:08:30 Set A/D encoding result=40 04:08:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:30 Set channel filter=0.000000e+000 result=40 04:08:30 Config A/D Result=40 04:08:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:30 Get A/D filter: -9.255963e+061 result=40 04:08:30 Get A/D value=-858993460 result=40 04:08:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:30 Parameters OK 04:08:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:30 Set A/D data flow result=40 04:08:30 Set A/D channel type result=40 04:08:30 Set A/D encoding result=40 04:08:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:30 Set channel filter=0.000000e+000 result=40 04:08:30 Config A/D Result=40 04:08:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:30 Get A/D filter: -9.255963e+061 result=40 04:08:30 Get A/D value=-858993460 result=40 04:08:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:30 Aux= 04:08:30 Message to Camera, serial 75473 queued 04:08:38 Received message from Master: op=Shutter serial=75483 04:08:38 Shutter LASER close 04:08:39 Received message from Master: op=PointingHead serial=75487 04:08:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:08:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:08:39 Point started: ret=0 04:08:39 point_skyscan result=0 04:08:40 Check angles 04:08:40 SkyScan query 04:08:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 04:08:40 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 04:08:41 Check angles 04:08:41 SkyScan query 04:08:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 04:08:41 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 04:08:41 Check angles 04:08:41 SkyScan query 04:08:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 04:08:42 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 04:08:42 Check angles 04:08:42 SkyScan query 04:08:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 04:08:43 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 04:08:43 Check angles 04:08:43 SkyScan query 04:08:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 04:08:43 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 04:08:44 Check angles 04:08:44 SkyScan query 04:08:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 04:08:44 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 04:08:44 Check angles 04:08:44 SkyScan query 04:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 04:08:45 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 04:08:45 Check angles 04:08:45 SkyScan query 04:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 04:08:46 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 04:08:46 Check angles 04:08:46 SkyScan query 04:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:08:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:08:46 Message to Master queued w/err=0: serial=75487 error=0 04:08:51 Received message from Master: op=Filter serial=75488 04:08:51 Color wheel filter change from 0 to 0 04:08:51 FLIGetFilterPos err=0 currentPosition=0 04:08:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:51 Filter is already there-color wheel unchanged 04:08:52 Received message from Master: op=Shutter serial=75489 04:08:52 Shutter LASER close 04:08:52 Received message from Camera: op=State serial=75491 04:08:52 GetSingleValue result=40 Value=cccccccc 04:08:52 SkyScan query 04:08:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:08:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:52 Parameters OK 04:08:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:52 Set A/D data flow result=40 04:08:52 Set A/D channel type result=40 04:08:52 Set A/D encoding result=40 04:08:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:52 Set channel filter=0.000000e+000 result=40 04:08:52 Config A/D Result=40 04:08:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:52 Get A/D filter: -9.255963e+061 result=40 04:08:52 Get A/D value=-858993460 result=40 04:08:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:52 Parameters OK 04:08:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:52 Set A/D data flow result=40 04:08:52 Set A/D channel type result=40 04:08:52 Set A/D encoding result=40 04:08:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:52 Set channel filter=0.000000e+000 result=40 04:08:52 Config A/D Result=40 04:08:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:52 Get A/D filter: -9.255963e+061 result=40 04:08:52 Get A/D value=-858993460 result=40 04:08:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:52 Aux= 04:08:52 Message to Camera, serial 75491 queued 04:09:29 Received message from Master: op=PointingHead serial=75504 04:09:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:09:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:09:30 Point started: ret=0 04:09:30 point_skyscan result=0 04:09:30 Check angles 04:09:30 SkyScan query 04:09:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:09:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:09:31 Message to Master queued w/err=0: serial=75504 error=0 04:09:36 Received message from Master: op=Filter serial=75505 04:09:36 Color wheel filter change from 0 to 0 04:09:36 FLIGetFilterPos err=0 currentPosition=0 04:09:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:36 Filter is already there-color wheel unchanged 04:09:36 Received message from Master: op=Shutter serial=75506 04:09:36 Shutter LASER close 04:09:36 Received message from Camera: op=State serial=75508 04:09:36 GetSingleValue result=40 Value=cccccccc 04:09:36 SkyScan query 04:09:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:09:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:37 Parameters OK 04:09:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:37 Set A/D data flow result=40 04:09:37 Set A/D channel type result=40 04:09:37 Set A/D encoding result=40 04:09:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:37 Set channel filter=0.000000e+000 result=40 04:09:37 Config A/D Result=40 04:09:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:37 Get A/D filter: -9.255963e+061 result=40 04:09:37 Get A/D value=-858993460 result=40 04:09:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:37 Parameters OK 04:09:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:37 Set A/D data flow result=40 04:09:37 Set A/D channel type result=40 04:09:37 Set A/D encoding result=40 04:09:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:37 Set channel filter=0.000000e+000 result=40 04:09:37 Config A/D Result=40 04:09:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:37 Get A/D filter: -9.255963e+061 result=40 04:09:37 Get A/D value=-858993460 result=40 04:09:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:37 Aux= 04:09:37 Message to Camera, serial 75508 queued 04:10:13 Received message from Master: op=PointingHead serial=75521 04:10:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:10:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:10:14 Point started: ret=0 04:10:14 point_skyscan result=0 04:10:15 Check angles 04:10:15 SkyScan query 04:10:15 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.495<-12433 Statuses=0009 0008 04:10:15 Msec=0 True Az=135.765 Ze=-6.495 Az status=0009 Ze status=0008 04:10:15 Check angles 04:10:15 SkyScan query 04:10:16 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.48<-12432 Statuses=0009 0008 04:10:16 Msec=750 True Az=153.345 Ze=-6.48 Az status=0009 Ze status=0008 04:10:16 Check angles 04:10:16 SkyScan query 04:10:17 SkyScan query done: ret=0 az=170.775<-11385 ze=-6.48<-12432 Statuses=0009 0008 04:10:17 Msec=1500 True Az=170.775 Ze=-6.48 Az status=0009 Ze status=0008 04:10:17 Check angles 04:10:17 SkyScan query 04:10:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:10:17 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 04:10:17 Message to Master queued w/err=0: serial=75521 error=0 04:10:22 Received message from Master: op=Filter serial=75522 04:10:22 Color wheel filter change from 0 to 0 04:10:22 FLIGetFilterPos err=0 currentPosition=0 04:10:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:22 Filter is already there-color wheel unchanged 04:10:23 Received message from Master: op=Shutter serial=75523 04:10:23 Shutter LASER close 04:10:23 Received message from Camera: op=State serial=75525 04:10:23 GetSingleValue result=40 Value=cccccccc 04:10:23 SkyScan query 04:10:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:10:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:23 Parameters OK 04:10:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:23 Set A/D data flow result=40 04:10:23 Set A/D channel type result=40 04:10:23 Set A/D encoding result=40 04:10:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:23 Set channel filter=0.000000e+000 result=40 04:10:23 Config A/D Result=40 04:10:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:23 Get A/D filter: -9.255963e+061 result=40 04:10:23 Get A/D value=-858993460 result=40 04:10:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:23 Parameters OK 04:10:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:23 Set A/D data flow result=40 04:10:23 Set A/D channel type result=40 04:10:23 Set A/D encoding result=40 04:10:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:23 Set channel filter=0.000000e+000 result=40 04:10:23 Config A/D Result=40 04:10:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:23 Get A/D filter: -9.255963e+061 result=40 04:10:23 Get A/D value=-858993460 result=40 04:10:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:23 Aux= 04:10:23 Message to Camera, serial 75525 queued 04:11:00 Received message from Master: op=PointingHead serial=75538 04:11:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:11:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:11:00 Point started: ret=0 04:11:00 point_skyscan result=0 04:11:01 Check angles 04:11:01 SkyScan query 04:11:02 SkyScan query done: ret=0 az=152.955<-10197 ze=6.51<-11566 Statuses=0009 0008 04:11:02 Msec=0 True Az=152.955 Ze=6.51 Az status=0009 Ze status=0008 04:11:02 Check angles 04:11:02 SkyScan query 04:11:03 SkyScan query done: ret=0 az=135.54<-9036 ze=6.495<-11567 Statuses=0009 0008 04:11:03 Msec=750 True Az=135.54 Ze=6.495 Az status=0009 Ze status=0008 04:11:03 Check angles 04:11:03 SkyScan query 04:11:03 SkyScan query done: ret=0 az=118.035<-7869 ze=6.495<-11567 Statuses=0009 0008 04:11:03 Msec=1500 True Az=118.035 Ze=6.495 Az status=0009 Ze status=0008 04:11:03 Check angles 04:11:03 SkyScan query 04:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:11:04 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:11:04 Message to Master queued w/err=0: serial=75538 error=0 04:11:09 Received message from Master: op=Filter serial=75539 04:11:09 Color wheel filter change from 0 to 0 04:11:09 FLIGetFilterPos err=0 currentPosition=0 04:11:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:09 Filter is already there-color wheel unchanged 04:11:09 Received message from Master: op=Shutter serial=75540 04:11:09 Shutter LASER close 04:11:09 Received message from Camera: op=State serial=75542 04:11:09 GetSingleValue result=40 Value=cccccccc 04:11:09 SkyScan query 04:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:11:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:10 Parameters OK 04:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:10 Set A/D data flow result=40 04:11:10 Set A/D channel type result=40 04:11:10 Set A/D encoding result=40 04:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:10 Set channel filter=0.000000e+000 result=40 04:11:10 Config A/D Result=40 04:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:10 Get A/D filter: -9.255963e+061 result=40 04:11:10 Get A/D value=-858993460 result=40 04:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:10 Parameters OK 04:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:10 Set A/D data flow result=40 04:11:10 Set A/D channel type result=40 04:11:10 Set A/D encoding result=40 04:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:10 Set channel filter=0.000000e+000 result=40 04:11:10 Config A/D Result=40 04:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:10 Get A/D filter: -9.255963e+061 result=40 04:11:10 Get A/D value=-858993460 result=40 04:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:10 Aux= 04:11:10 Message to Camera, serial 75542 queued 04:11:47 Received message from Master: op=PointingHead serial=75555 04:11:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:11:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:11:47 Point started: ret=0 04:11:47 point_skyscan result=0 04:11:48 Check angles 04:11:48 SkyScan query 04:11:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 04:11:48 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 04:11:49 Check angles 04:11:49 SkyScan query 04:11:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 04:11:49 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 04:11:49 Check angles 04:11:49 SkyScan query 04:11:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 04:11:50 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 04:11:50 Check angles 04:11:50 SkyScan query 04:11:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.92<-17728 Statuses=0008 0009 04:11:51 Msec=2250 True Az=112.995 Ze=-85.92 Az status=0008 Ze status=0009 04:11:51 Check angles 04:11:51 SkyScan query 04:11:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 04:11:51 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 04:11:52 Check angles 04:11:52 SkyScan query 04:11:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.25<-20550 Statuses=0008 0009 04:11:52 Msec=3750 True Az=112.995 Ze=-128.25 Az status=0008 Ze status=0009 04:11:52 Check angles 04:11:52 SkyScan query 04:11:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.205<-21947 Statuses=0008 0009 04:11:53 Msec=4500 True Az=112.995 Ze=-149.205 Az status=0008 Ze status=0009 04:11:53 Check angles 04:11:53 SkyScan query 04:11:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.55<-23370 Statuses=0008 0009 04:11:54 Msec=5250 True Az=112.995 Ze=-170.55 Az status=0008 Ze status=0009 04:11:54 Check angles 04:11:54 SkyScan query 04:11:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:11:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:11:54 Message to Master queued w/err=0: serial=75555 error=0 04:11:59 Received message from Master: op=Filter serial=75556 04:11:59 Color wheel filter change from 0 to 0 04:11:59 FLIGetFilterPos err=0 currentPosition=0 04:11:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:59 Filter is already there-color wheel unchanged 04:12:00 Received message from Master: op=Shutter serial=75557 04:12:00 Shutter LASER open 04:12:00 Received message from Camera: op=State serial=75559 04:12:00 GetSingleValue result=40 Value=cccccccc 04:12:00 SkyScan query 04:12:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:12:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:00 Parameters OK 04:12:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:00 Set A/D data flow result=40 04:12:00 Set A/D channel type result=40 04:12:00 Set A/D encoding result=40 04:12:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:00 Set channel filter=0.000000e+000 result=40 04:12:00 Config A/D Result=40 04:12:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:00 Get A/D filter: -9.255963e+061 result=40 04:12:00 Get A/D value=-858993460 result=40 04:12:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:00 Parameters OK 04:12:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:00 Set A/D data flow result=40 04:12:00 Set A/D channel type result=40 04:12:00 Set A/D encoding result=40 04:12:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:00 Set channel filter=0.000000e+000 result=40 04:12:00 Config A/D Result=40 04:12:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:00 Get A/D filter: -9.255963e+061 result=40 04:12:00 Get A/D value=-858993460 result=40 04:12:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:00 Aux= 04:12:00 Message to Camera, serial 75559 queued 04:12:09 Received message from Master: op=Shutter serial=75569 04:12:09 Shutter LASER close 04:12:09 Received message from Master: op=PointingHead serial=75573 04:12:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:12:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:12:10 Point started: ret=0 04:12:10 point_skyscan result=0 04:12:10 Check angles 04:12:10 SkyScan query 04:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 04:12:11 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 04:12:11 Check angles 04:12:11 SkyScan query 04:12:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.575<-20105 Statuses=0008 0009 04:12:12 Msec=750 True Az=112.995 Ze=-121.575 Az status=0008 Ze status=0009 04:12:12 Check angles 04:12:12 SkyScan query 04:12:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.635<-18709 Statuses=0008 0009 04:12:12 Msec=1500 True Az=112.995 Ze=-100.635 Az status=0008 Ze status=0009 04:12:13 Check angles 04:12:13 SkyScan query 04:12:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.68<-17312 Statuses=0008 0009 04:12:13 Msec=2250 True Az=112.995 Ze=-79.68 Az status=0008 Ze status=0009 04:12:13 Check angles 04:12:13 SkyScan query 04:12:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 04:12:14 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 04:12:14 Check angles 04:12:14 SkyScan query 04:12:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 04:12:15 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 04:12:15 Check angles 04:12:15 SkyScan query 04:12:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 04:12:15 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 04:12:16 Check angles 04:12:16 SkyScan query 04:12:16 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 04:12:16 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 04:12:16 Check angles 04:12:16 SkyScan query 04:12:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:12:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:12:17 Message to Master queued w/err=0: serial=75573 error=0 04:12:22 Received message from Master: op=Filter serial=75574 04:12:22 Color wheel filter change from 0 to 0 04:12:22 FLIGetFilterPos err=0 currentPosition=0 04:12:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:22 Filter is already there-color wheel unchanged 04:12:22 Received message from Master: op=Shutter serial=75575 04:12:22 Shutter LASER close 04:12:22 Received message from Camera: op=State serial=75577 04:12:22 GetSingleValue result=40 Value=cccccccc 04:12:22 SkyScan query 04:12:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:12:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:23 Parameters OK 04:12:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:23 Set A/D data flow result=40 04:12:23 Set A/D channel type result=40 04:12:23 Set A/D encoding result=40 04:12:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:23 Set channel filter=0.000000e+000 result=40 04:12:23 Config A/D Result=40 04:12:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:23 Get A/D filter: -9.255963e+061 result=40 04:12:23 Get A/D value=-858993460 result=40 04:12:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:23 Parameters OK 04:12:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:23 Set A/D data flow result=40 04:12:23 Set A/D channel type result=40 04:12:23 Set A/D encoding result=40 04:12:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:23 Set channel filter=0.000000e+000 result=40 04:12:23 Config A/D Result=40 04:12:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:23 Get A/D filter: -9.255963e+061 result=40 04:12:23 Get A/D value=-858993460 result=40 04:12:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:23 Aux= 04:12:23 Message to Camera, serial 75577 queued 04:13:00 Received message from Master: op=PointingHead serial=75590 04:13:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:13:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:13:00 Point started: ret=0 04:13:00 point_skyscan result=0 04:13:01 Check angles 04:13:01 SkyScan query 04:13:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:13:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:13:01 Message to Master queued w/err=0: serial=75590 error=0 04:13:06 Received message from Master: op=Filter serial=75591 04:13:06 Color wheel filter change from 0 to 0 04:13:06 FLIGetFilterPos err=0 currentPosition=0 04:13:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:06 Filter is already there-color wheel unchanged 04:13:07 Received message from Master: op=Shutter serial=75592 04:13:07 Shutter LASER close 04:13:07 Received message from Camera: op=State serial=75594 04:13:07 GetSingleValue result=40 Value=cccccccc 04:13:07 SkyScan query 04:13:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:13:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:07 Parameters OK 04:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:07 Set A/D data flow result=40 04:13:07 Set A/D channel type result=40 04:13:07 Set A/D encoding result=40 04:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:07 Set channel filter=0.000000e+000 result=40 04:13:07 Config A/D Result=40 04:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:07 Get A/D filter: -9.255963e+061 result=40 04:13:07 Get A/D value=-858993460 result=40 04:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:07 Parameters OK 04:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:07 Set A/D data flow result=40 04:13:07 Set A/D channel type result=40 04:13:07 Set A/D encoding result=40 04:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:07 Set channel filter=0.000000e+000 result=40 04:13:07 Config A/D Result=40 04:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:07 Get A/D filter: -9.255963e+061 result=40 04:13:07 Get A/D value=-858993460 result=40 04:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:07 Aux= 04:13:07 Message to Camera, serial 75594 queued 04:13:44 Received message from Master: op=PointingHead serial=75607 04:13:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:13:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:13:44 Point started: ret=0 04:13:44 point_skyscan result=0 04:13:45 Check angles 04:13:45 SkyScan query 04:13:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:13:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:13:46 Message to Master queued w/err=0: serial=75607 error=0 04:13:51 Received message from Master: op=Filter serial=75608 04:13:51 Color wheel filter change from 0 to 0 04:13:51 FLIGetFilterPos err=0 currentPosition=0 04:13:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:51 Filter is already there-color wheel unchanged 04:13:51 Received message from Master: op=Shutter serial=75609 04:13:51 Shutter LASER close 04:13:51 Received message from Camera: op=State serial=75611 04:13:51 GetSingleValue result=40 Value=cccccccc 04:13:51 SkyScan query 04:13:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:13:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:51 Parameters OK 04:13:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:51 Set A/D data flow result=40 04:13:51 Set A/D channel type result=40 04:13:51 Set A/D encoding result=40 04:13:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:51 Set channel filter=0.000000e+000 result=40 04:13:51 Config A/D Result=40 04:13:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:51 Get A/D filter: -9.255963e+061 result=40 04:13:51 Get A/D value=-858993460 result=40 04:13:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:51 Parameters OK 04:13:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:51 Set A/D data flow result=40 04:13:51 Set A/D channel type result=40 04:13:51 Set A/D encoding result=40 04:13:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:51 Set channel filter=0.000000e+000 result=40 04:13:51 Config A/D Result=40 04:13:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:51 Get A/D filter: -9.255963e+061 result=40 04:13:51 Get A/D value=-858993460 result=40 04:13:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:51 Aux= 04:13:51 Message to Camera, serial 75611 queued [UTC 2019-3-3 04:14:28] 04:14:28 Received message from Master: op=PointingHead serial=75624 04:14:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:14:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:14:29 Point started: ret=0 04:14:29 point_skyscan result=0 04:14:29 Check angles 04:14:29 SkyScan query 04:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:14:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:14:30 Message to Master queued w/err=0: serial=75624 error=0 04:14:35 Received message from Master: op=Filter serial=75625 04:14:35 Color wheel filter change from 0 to 0 04:14:35 FLIGetFilterPos err=0 currentPosition=0 04:14:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:35 Filter is already there-color wheel unchanged 04:14:35 Received message from Master: op=Shutter serial=75626 04:14:35 Shutter LASER close 04:14:35 Received message from Camera: op=State serial=75628 04:14:35 GetSingleValue result=40 Value=cccccccc 04:14:35 SkyScan query 04:14:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:14:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:36 Parameters OK 04:14:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:36 Set A/D data flow result=40 04:14:36 Set A/D channel type result=40 04:14:36 Set A/D encoding result=40 04:14:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:36 Set channel filter=0.000000e+000 result=40 04:14:36 Config A/D Result=40 04:14:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:36 Get A/D filter: -9.255963e+061 result=40 04:14:36 Get A/D value=-858993460 result=40 04:14:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:36 Parameters OK 04:14:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:36 Set A/D data flow result=40 04:14:36 Set A/D channel type result=40 04:14:36 Set A/D encoding result=40 04:14:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:36 Set channel filter=0.000000e+000 result=40 04:14:36 Config A/D Result=40 04:14:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:36 Get A/D filter: -9.255963e+061 result=40 04:14:36 Get A/D value=-858993460 result=40 04:14:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:36 Aux= 04:14:36 Message to Camera, serial 75628 queued 04:15:13 Received message from Master: op=PointingHead serial=75641 04:15:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:15:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:15:13 Point started: ret=0 04:15:13 point_skyscan result=0 04:15:14 Check angles 04:15:14 SkyScan query 04:15:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 04:15:14 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 04:15:15 Check angles 04:15:15 SkyScan query 04:15:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.195<-15013 Statuses=0008 0009 04:15:15 Msec=750 True Az=112.995 Ze=-45.195 Az status=0008 Ze status=0009 04:15:15 Check angles 04:15:15 SkyScan query 04:15:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.135<-16409 Statuses=0008 0009 04:15:16 Msec=1500 True Az=112.995 Ze=-66.135 Az status=0008 Ze status=0009 04:15:16 Check angles 04:15:16 SkyScan query 04:15:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 04:15:17 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 04:15:17 Check angles 04:15:17 SkyScan query 04:15:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.045<-19203 Statuses=0008 0009 04:15:17 Msec=3000 True Az=112.995 Ze=-108.045 Az status=0008 Ze status=0009 04:15:18 Check angles 04:15:18 SkyScan query 04:15:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.985<-20599 Statuses=0008 0009 04:15:18 Msec=3750 True Az=112.995 Ze=-128.985 Az status=0008 Ze status=0009 04:15:18 Check angles 04:15:18 SkyScan query 04:15:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.375<-22025 Statuses=0008 0009 04:15:19 Msec=4500 True Az=112.995 Ze=-150.375 Az status=0008 Ze status=0009 04:15:19 Check angles 04:15:19 SkyScan query 04:15:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0008 0009 04:15:20 Msec=5250 True Az=112.995 Ze=-171.165 Az status=0008 Ze status=0009 04:15:20 Check angles 04:15:20 SkyScan query 04:15:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:15:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:15:20 Message to Master queued w/err=0: serial=75641 error=0 04:15:25 Received message from Master: op=Filter serial=75642 04:15:25 Color wheel filter change from 0 to 0 04:15:25 FLIGetFilterPos err=0 currentPosition=0 04:15:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:25 Filter is already there-color wheel unchanged 04:15:26 Received message from Master: op=Shutter serial=75643 04:15:26 Shutter LASER open 04:15:26 Received message from Camera: op=State serial=75645 04:15:26 GetSingleValue result=40 Value=cccccccc 04:15:26 SkyScan query 04:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:15:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:26 Parameters OK 04:15:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:26 Set A/D data flow result=40 04:15:26 Set A/D channel type result=40 04:15:26 Set A/D encoding result=40 04:15:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:26 Set channel filter=0.000000e+000 result=40 04:15:26 Config A/D Result=40 04:15:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:26 Get A/D filter: -9.255963e+061 result=40 04:15:26 Get A/D value=-858993460 result=40 04:15:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:26 Parameters OK 04:15:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:26 Set A/D data flow result=40 04:15:26 Set A/D channel type result=40 04:15:26 Set A/D encoding result=40 04:15:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:26 Set channel filter=0.000000e+000 result=40 04:15:26 Config A/D Result=40 04:15:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:26 Get A/D filter: -9.255963e+061 result=40 04:15:26 Get A/D value=-858993460 result=40 04:15:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:26 Aux= 04:15:26 Message to Camera, serial 75645 queued 04:15:35 Received message from Master: op=Shutter serial=75655 04:15:35 Shutter LASER close 04:15:35 Received message from Master: op=PointingHead serial=75659 04:15:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:15:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:15:36 Point started: ret=0 04:15:36 point_skyscan result=0 04:15:36 Check angles 04:15:36 SkyScan query 04:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 04:15:37 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 04:15:37 Check angles 04:15:37 SkyScan query 04:15:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 04:15:38 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 04:15:38 Check angles 04:15:38 SkyScan query 04:15:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 04:15:39 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 04:15:39 Check angles 04:15:39 SkyScan query 04:15:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 04:15:39 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 04:15:39 Check angles 04:15:39 SkyScan query 04:15:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 04:15:40 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 04:15:40 Check angles 04:15:40 SkyScan query 04:15:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 04:15:41 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 04:15:41 Check angles 04:15:41 SkyScan query 04:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 04:15:42 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 04:15:42 Check angles 04:15:42 SkyScan query 04:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 04:15:42 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 04:15:42 Check angles 04:15:42 SkyScan query 04:15:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:15:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:15:43 Message to Master queued w/err=0: serial=75659 error=0 04:15:48 Received message from Master: op=Filter serial=75660 04:15:48 Color wheel filter change from 0 to 0 04:15:48 FLIGetFilterPos err=0 currentPosition=0 04:15:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:48 Filter is already there-color wheel unchanged 04:15:48 Received message from Master: op=Shutter serial=75661 04:15:48 Shutter LASER close 04:15:48 Received message from Camera: op=State serial=75663 04:15:48 GetSingleValue result=40 Value=cccccccc 04:15:48 SkyScan query 04:15:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:15:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:49 Parameters OK 04:15:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:49 Set A/D data flow result=40 04:15:49 Set A/D channel type result=40 04:15:49 Set A/D encoding result=40 04:15:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:49 Set channel filter=0.000000e+000 result=40 04:15:49 Config A/D Result=40 04:15:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:49 Get A/D filter: -9.255963e+061 result=40 04:15:49 Get A/D value=-858993460 result=40 04:15:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:49 Parameters OK 04:15:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:49 Set A/D data flow result=40 04:15:49 Set A/D channel type result=40 04:15:49 Set A/D encoding result=40 04:15:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:49 Set channel filter=0.000000e+000 result=40 04:15:49 Config A/D Result=40 04:15:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:49 Get A/D filter: -9.255963e+061 result=40 04:15:49 Get A/D value=-858993460 result=40 04:15:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:49 Aux= 04:15:49 Message to Camera, serial 75663 queued 04:16:26 Received message from Master: op=PointingHead serial=75676 04:16:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:16:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:16:26 Point started: ret=0 04:16:26 point_skyscan result=0 04:16:27 Check angles 04:16:27 SkyScan query 04:16:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:16:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:16:27 Message to Master queued w/err=0: serial=75676 error=0 04:16:32 Received message from Master: op=Filter serial=75677 04:16:32 Color wheel filter change from 0 to 0 04:16:32 FLIGetFilterPos err=0 currentPosition=0 04:16:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:32 Filter is already there-color wheel unchanged 04:16:33 Received message from Master: op=Shutter serial=75678 04:16:33 Shutter LASER close 04:16:33 Received message from Camera: op=State serial=75680 04:16:33 GetSingleValue result=40 Value=cccccccc 04:16:33 SkyScan query 04:16:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:16:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:33 Parameters OK 04:16:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:33 Set A/D data flow result=40 04:16:33 Set A/D channel type result=40 04:16:33 Set A/D encoding result=40 04:16:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:33 Set channel filter=0.000000e+000 result=40 04:16:33 Config A/D Result=40 04:16:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:33 Get A/D filter: -9.255963e+061 result=40 04:16:33 Get A/D value=-858993460 result=40 04:16:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:33 Parameters OK 04:16:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:33 Set A/D data flow result=40 04:16:33 Set A/D channel type result=40 04:16:33 Set A/D encoding result=40 04:16:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:33 Set channel filter=0.000000e+000 result=40 04:16:33 Config A/D Result=40 04:16:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:33 Get A/D filter: -9.255963e+061 result=40 04:16:33 Get A/D value=-858993460 result=40 04:16:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:33 Aux= 04:16:33 Message to Camera, serial 75680 queued 04:17:10 Received message from Master: op=PointingHead serial=75693 04:17:10 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:17:10 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:17:10 Point started: ret=0 04:17:10 point_skyscan result=0 04:17:11 Check angles 04:17:11 SkyScan query 04:17:12 SkyScan query done: ret=0 az=136.185<-9079 ze=-6.51<-12434 Statuses=0009 0008 04:17:12 Msec=0 True Az=136.185 Ze=-6.51 Az status=0009 Ze status=0008 04:17:12 Check angles 04:17:12 SkyScan query 04:17:13 SkyScan query done: ret=0 az=153.69<-10246 ze=-6.495<-12433 Statuses=0009 0008 04:17:13 Msec=750 True Az=153.69 Ze=-6.495 Az status=0009 Ze status=0008 04:17:13 Check angles 04:17:13 SkyScan query 04:17:13 SkyScan query done: ret=0 az=171.18<-11412 ze=-6.495<-12433 Statuses=0009 0008 04:17:13 Msec=1500 True Az=171.18 Ze=-6.495 Az status=0009 Ze status=0008 04:17:13 Check angles 04:17:13 SkyScan query 04:17:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:17:14 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:17:14 Message to Master queued w/err=0: serial=75693 error=0 04:17:19 Received message from Master: op=Filter serial=75694 04:17:19 Color wheel filter change from 0 to 0 04:17:19 FLIGetFilterPos err=0 currentPosition=0 04:17:19 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:19 Filter is already there-color wheel unchanged 04:17:19 Received message from Master: op=Shutter serial=75695 04:17:19 Shutter LASER close 04:17:19 Received message from Camera: op=State serial=75697 04:17:19 GetSingleValue result=40 Value=cccccccc 04:17:19 SkyScan query 04:17:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:17:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:20 Parameters OK 04:17:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:20 Set A/D data flow result=40 04:17:20 Set A/D channel type result=40 04:17:20 Set A/D encoding result=40 04:17:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:20 Set channel filter=0.000000e+000 result=40 04:17:20 Config A/D Result=40 04:17:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:20 Get A/D filter: -9.255963e+061 result=40 04:17:20 Get A/D value=-858993460 result=40 04:17:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:20 Parameters OK 04:17:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:20 Set A/D data flow result=40 04:17:20 Set A/D channel type result=40 04:17:20 Set A/D encoding result=40 04:17:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:20 Set channel filter=0.000000e+000 result=40 04:17:20 Config A/D Result=40 04:17:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:20 Get A/D filter: -9.255963e+061 result=40 04:17:20 Get A/D value=-858993460 result=40 04:17:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:20 Aux= 04:17:20 Message to Camera, serial 75697 queued 04:17:57 Received message from Master: op=PointingHead serial=75710 04:17:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:17:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:17:57 Point started: ret=0 04:17:57 point_skyscan result=0 04:17:58 Check angles 04:17:58 SkyScan query 04:17:58 SkyScan query done: ret=0 az=152.58<-10172 ze=6.51<-11566 Statuses=0009 0008 04:17:58 Msec=0 True Az=152.58 Ze=6.51 Az status=0009 Ze status=0008 04:17:59 Check angles 04:17:59 SkyScan query 04:17:59 SkyScan query done: ret=0 az=134.715<-8981 ze=6.495<-11567 Statuses=0009 0008 04:17:59 Msec=750 True Az=134.715 Ze=6.495 Az status=0009 Ze status=0008 04:17:59 Check angles 04:17:59 SkyScan query 04:18:00 SkyScan query done: ret=0 az=117.24<-7816 ze=6.495<-11567 Statuses=0009 0008 04:18:00 Msec=1500 True Az=117.24 Ze=6.495 Az status=0009 Ze status=0008 04:18:00 Check angles 04:18:00 SkyScan query 04:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:18:01 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:18:01 Message to Master queued w/err=0: serial=75710 error=0 04:18:06 Received message from Master: op=Filter serial=75711 04:18:06 Color wheel filter change from 0 to 0 04:18:06 FLIGetFilterPos err=0 currentPosition=0 04:18:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:06 Filter is already there-color wheel unchanged 04:18:06 Received message from Master: op=Shutter serial=75712 04:18:06 Shutter LASER close 04:18:06 Received message from Camera: op=State serial=75714 04:18:06 GetSingleValue result=40 Value=cccccccc 04:18:06 SkyScan query 04:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:18:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:06 Parameters OK 04:18:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:06 Set A/D data flow result=40 04:18:06 Set A/D channel type result=40 04:18:06 Set A/D encoding result=40 04:18:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:06 Set channel filter=0.000000e+000 result=40 04:18:06 Config A/D Result=40 04:18:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:06 Get A/D filter: -9.255963e+061 result=40 04:18:06 Get A/D value=-858993460 result=40 04:18:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:06 Parameters OK 04:18:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:06 Set A/D data flow result=40 04:18:06 Set A/D channel type result=40 04:18:06 Set A/D encoding result=40 04:18:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:06 Set channel filter=0.000000e+000 result=40 04:18:06 Config A/D Result=40 04:18:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:06 Get A/D filter: -9.255963e+061 result=40 04:18:06 Get A/D value=-858993460 result=40 04:18:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:06 Aux= 04:18:06 Message to Camera, serial 75714 queued 04:18:43 Received message from Master: op=PointingHead serial=75727 04:18:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:18:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:18:44 Point started: ret=0 04:18:44 point_skyscan result=0 04:18:44 Check angles 04:18:44 SkyScan query 04:18:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 04:18:45 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 04:18:45 Check angles 04:18:45 SkyScan query 04:18:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 04:18:46 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 04:18:46 Check angles 04:18:46 SkyScan query 04:18:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 04:18:46 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 04:18:47 Check angles 04:18:47 SkyScan query 04:18:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 04:18:47 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 04:18:47 Check angles 04:18:47 SkyScan query 04:18:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 04:18:48 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 04:18:48 Check angles 04:18:48 SkyScan query 04:18:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 04:18:49 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 04:18:49 Check angles 04:18:49 SkyScan query 04:18:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 04:18:49 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 04:18:50 Check angles 04:18:50 SkyScan query 04:18:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.655<-23377 Statuses=0008 0009 04:18:50 Msec=5250 True Az=112.995 Ze=-170.655 Az status=0008 Ze status=0009 04:18:50 Check angles 04:18:50 SkyScan query 04:18:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:18:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:18:51 Message to Master queued w/err=0: serial=75727 error=0 04:18:56 Received message from Master: op=Filter serial=75728 04:18:56 Color wheel filter change from 0 to 0 04:18:56 FLIGetFilterPos err=0 currentPosition=0 04:18:56 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:56 Filter is already there-color wheel unchanged 04:18:56 Received message from Master: op=Shutter serial=75729 04:18:56 Shutter LASER open 04:18:56 Received message from Camera: op=State serial=75731 04:18:56 GetSingleValue result=40 Value=cccccccc 04:18:56 SkyScan query 04:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:18:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:57 Parameters OK 04:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:57 Set A/D data flow result=40 04:18:57 Set A/D channel type result=40 04:18:57 Set A/D encoding result=40 04:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:57 Set channel filter=0.000000e+000 result=40 04:18:57 Config A/D Result=40 04:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:57 Get A/D filter: -9.255963e+061 result=40 04:18:57 Get A/D value=-858993460 result=40 04:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:57 Parameters OK 04:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:57 Set A/D data flow result=40 04:18:57 Set A/D channel type result=40 04:18:57 Set A/D encoding result=40 04:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:57 Set channel filter=0.000000e+000 result=40 04:18:57 Config A/D Result=40 04:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:57 Get A/D filter: -9.255963e+061 result=40 04:18:57 Get A/D value=-858993460 result=40 04:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:57 Aux= 04:18:57 Message to Camera, serial 75731 queued 04:19:05 Received message from Master: op=Shutter serial=75741 04:19:05 Shutter LASER close 04:19:06 Received message from Master: op=PointingHead serial=75745 04:19:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:19:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:19:06 Point started: ret=0 04:19:06 point_skyscan result=0 04:19:07 Check angles 04:19:07 SkyScan query 04:19:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 04:19:07 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 04:19:08 Check angles 04:19:08 SkyScan query 04:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 04:19:08 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 04:19:08 Check angles 04:19:08 SkyScan query 04:19:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 04:19:09 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 04:19:09 Check angles 04:19:09 SkyScan query 04:19:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 04:19:10 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 04:19:10 Check angles 04:19:10 SkyScan query 04:19:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 04:19:10 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 04:19:11 Check angles 04:19:11 SkyScan query 04:19:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 04:19:11 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 04:19:11 Check angles 04:19:11 SkyScan query 04:19:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 04:19:12 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 04:19:12 Check angles 04:19:12 SkyScan query 04:19:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 04:19:13 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 04:19:13 Check angles 04:19:13 SkyScan query 04:19:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:19:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:19:13 Message to Master queued w/err=0: serial=75745 error=0 04:19:18 Received message from Master: op=Filter serial=75746 04:19:18 Color wheel filter change from 0 to 0 04:19:18 FLIGetFilterPos err=0 currentPosition=0 04:19:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:18 Filter is already there-color wheel unchanged 04:19:19 Received message from Master: op=Shutter serial=75747 04:19:19 Shutter LASER close 04:19:19 Received message from Camera: op=State serial=75749 04:19:19 GetSingleValue result=40 Value=cccccccc 04:19:19 SkyScan query 04:19:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:19:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:19 Parameters OK 04:19:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:19 Set A/D data flow result=40 04:19:19 Set A/D channel type result=40 04:19:19 Set A/D encoding result=40 04:19:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:19 Set channel filter=0.000000e+000 result=40 04:19:19 Config A/D Result=40 04:19:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:19 Get A/D filter: -9.255963e+061 result=40 04:19:19 Get A/D value=-858993460 result=40 04:19:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:19 Parameters OK 04:19:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:19 Set A/D data flow result=40 04:19:19 Set A/D channel type result=40 04:19:19 Set A/D encoding result=40 04:19:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:19 Set channel filter=0.000000e+000 result=40 04:19:19 Config A/D Result=40 04:19:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:19 Get A/D filter: -9.255963e+061 result=40 04:19:19 Get A/D value=-858993460 result=40 04:19:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:19 Aux= 04:19:19 Message to Camera, serial 75749 queued 04:19:56 Received message from Master: op=PointingHead serial=75762 04:19:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:19:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:19:57 Point started: ret=0 04:19:57 point_skyscan result=0 04:19:57 Check angles 04:19:57 SkyScan query 04:19:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:19:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:19:58 Message to Master queued w/err=0: serial=75762 error=0 04:20:03 Received message from Master: op=Filter serial=75763 04:20:03 Color wheel filter change from 0 to 0 04:20:03 FLIGetFilterPos err=0 currentPosition=0 04:20:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:03 Filter is already there-color wheel unchanged 04:20:03 Received message from Master: op=Shutter serial=75764 04:20:03 Shutter LASER close 04:20:03 Received message from Camera: op=State serial=75766 04:20:03 GetSingleValue result=40 Value=cccccccc 04:20:03 SkyScan query 04:20:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:20:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:04 Parameters OK 04:20:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:04 Set A/D data flow result=40 04:20:04 Set A/D channel type result=40 04:20:04 Set A/D encoding result=40 04:20:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:04 Set channel filter=0.000000e+000 result=40 04:20:04 Config A/D Result=40 04:20:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:04 Get A/D filter: -9.255963e+061 result=40 04:20:04 Get A/D value=-858993460 result=40 04:20:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:04 Parameters OK 04:20:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:04 Set A/D data flow result=40 04:20:04 Set A/D channel type result=40 04:20:04 Set A/D encoding result=40 04:20:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:04 Set channel filter=0.000000e+000 result=40 04:20:04 Config A/D Result=40 04:20:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:04 Get A/D filter: -9.255963e+061 result=40 04:20:04 Get A/D value=-858993460 result=40 04:20:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:04 Aux= 04:20:04 Message to Camera, serial 75766 queued 04:20:41 Received message from Master: op=PointingHead serial=75779 04:20:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:20:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:20:41 Point started: ret=0 04:20:41 point_skyscan result=0 04:20:42 Check angles 04:20:42 SkyScan query 04:20:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:20:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:20:42 Message to Master queued w/err=0: serial=75779 error=0 04:20:47 Received message from Master: op=Filter serial=75780 04:20:47 Color wheel filter change from 0 to 0 04:20:47 FLIGetFilterPos err=0 currentPosition=0 04:20:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:47 Filter is already there-color wheel unchanged 04:20:47 Received message from Master: op=Shutter serial=75781 04:20:47 Shutter LASER close 04:20:48 Received message from Camera: op=State serial=75783 04:20:48 GetSingleValue result=40 Value=cccccccc 04:20:48 SkyScan query 04:20:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:20:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:48 Parameters OK 04:20:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:48 Set A/D data flow result=40 04:20:48 Set A/D channel type result=40 04:20:48 Set A/D encoding result=40 04:20:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:48 Set channel filter=0.000000e+000 result=40 04:20:48 Config A/D Result=40 04:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:48 Get A/D filter: -9.255963e+061 result=40 04:20:48 Get A/D value=-858993460 result=40 04:20:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:48 Parameters OK 04:20:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:48 Set A/D data flow result=40 04:20:48 Set A/D channel type result=40 04:20:48 Set A/D encoding result=40 04:20:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:48 Set channel filter=0.000000e+000 result=40 04:20:48 Config A/D Result=40 04:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:48 Get A/D filter: -9.255963e+061 result=40 04:20:48 Get A/D value=-858993460 result=40 04:20:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:48 Aux= 04:20:48 Message to Camera, serial 75783 queued 04:21:25 Received message from Master: op=PointingHead serial=75796 04:21:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:21:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:21:25 Point started: ret=0 04:21:25 point_skyscan result=0 04:21:26 Check angles 04:21:26 SkyScan query 04:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:21:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:21:27 Message to Master queued w/err=0: serial=75796 error=0 04:21:32 Received message from Master: op=Filter serial=75797 04:21:32 Color wheel filter change from 0 to 0 04:21:32 FLIGetFilterPos err=0 currentPosition=0 04:21:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:32 Filter is already there-color wheel unchanged 04:21:32 Received message from Master: op=Shutter serial=75798 04:21:32 Shutter LASER close 04:21:32 Received message from Camera: op=State serial=75800 04:21:32 GetSingleValue result=40 Value=cccccccc 04:21:32 SkyScan query 04:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:21:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:32 Parameters OK 04:21:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:32 Set A/D data flow result=40 04:21:32 Set A/D channel type result=40 04:21:32 Set A/D encoding result=40 04:21:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:32 Set channel filter=0.000000e+000 result=40 04:21:32 Config A/D Result=40 04:21:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:32 Get A/D filter: -9.255963e+061 result=40 04:21:32 Get A/D value=-858993460 result=40 04:21:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:32 Parameters OK 04:21:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:32 Set A/D data flow result=40 04:21:32 Set A/D channel type result=40 04:21:32 Set A/D encoding result=40 04:21:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:32 Set channel filter=0.000000e+000 result=40 04:21:32 Config A/D Result=40 04:21:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:32 Get A/D filter: -9.255963e+061 result=40 04:21:32 Get A/D value=-858993460 result=40 04:21:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:32 Aux= 04:21:32 Message to Camera, serial 75800 queued 04:22:09 Received message from Master: op=PointingHead serial=75813 04:22:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:22:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:22:10 Point started: ret=0 04:22:10 point_skyscan result=0 04:22:10 Check angles 04:22:10 SkyScan query 04:22:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 04:22:11 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 04:22:11 Check angles 04:22:11 SkyScan query 04:22:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 04:22:12 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 04:22:12 Check angles 04:22:12 SkyScan query 04:22:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 04:22:12 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 04:22:13 Check angles 04:22:13 SkyScan query 04:22:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 04:22:13 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 04:22:13 Check angles 04:22:13 SkyScan query 04:22:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.43<-19162 Statuses=0008 0009 04:22:14 Msec=3000 True Az=112.995 Ze=-107.43 Az status=0008 Ze status=0009 04:22:14 Check angles 04:22:14 SkyScan query 04:22:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 04:22:15 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 04:22:15 Check angles 04:22:15 SkyScan query 04:22:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.775<-21985 Statuses=0008 0009 04:22:15 Msec=4500 True Az=112.995 Ze=-149.775 Az status=0008 Ze status=0009 04:22:16 Check angles 04:22:16 SkyScan query 04:22:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.655<-23377 Statuses=0008 0009 04:22:16 Msec=5250 True Az=112.995 Ze=-170.655 Az status=0008 Ze status=0009 04:22:16 Check angles 04:22:16 SkyScan query 04:22:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:22:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:22:17 Message to Master queued w/err=0: serial=75813 error=0 04:22:22 Received message from Master: op=Filter serial=75814 04:22:22 Color wheel filter change from 0 to 0 04:22:22 FLIGetFilterPos err=0 currentPosition=0 04:22:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:22 Filter is already there-color wheel unchanged 04:22:22 Received message from Master: op=Shutter serial=75815 04:22:22 Shutter LASER open 04:22:22 Received message from Camera: op=State serial=75817 04:22:22 GetSingleValue result=40 Value=cccccccc 04:22:22 SkyScan query 04:22:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:22:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:23 Parameters OK 04:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:23 Set A/D data flow result=40 04:22:23 Set A/D channel type result=40 04:22:23 Set A/D encoding result=40 04:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:23 Set channel filter=0.000000e+000 result=40 04:22:23 Config A/D Result=40 04:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:23 Get A/D filter: -9.255963e+061 result=40 04:22:23 Get A/D value=-858993460 result=40 04:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:23 Parameters OK 04:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:23 Set A/D data flow result=40 04:22:23 Set A/D channel type result=40 04:22:23 Set A/D encoding result=40 04:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:23 Set channel filter=0.000000e+000 result=40 04:22:23 Config A/D Result=40 04:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:23 Get A/D filter: -9.255963e+061 result=40 04:22:23 Get A/D value=-858993460 result=40 04:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:23 Aux= 04:22:23 Message to Camera, serial 75817 queued 04:22:31 Received message from Master: op=Shutter serial=75827 04:22:31 Shutter LASER close 04:22:32 Received message from Master: op=PointingHead serial=75831 04:22:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:22:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:22:32 Point started: ret=0 04:22:32 point_skyscan result=0 04:22:33 Check angles 04:22:33 SkyScan query 04:22:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.71<-21514 Statuses=0008 0009 04:22:34 Msec=0 True Az=112.995 Ze=-142.71 Az status=0008 Ze status=0009 04:22:34 Check angles 04:22:34 SkyScan query 04:22:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.725<-20115 Statuses=0008 0009 04:22:34 Msec=750 True Az=112.995 Ze=-121.725 Az status=0008 Ze status=0009 04:22:34 Check angles 04:22:34 SkyScan query 04:22:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 04:22:35 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 04:22:35 Check angles 04:22:35 SkyScan query 04:22:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.845<-17323 Statuses=0008 0009 04:22:36 Msec=2250 True Az=112.995 Ze=-79.845 Az status=0008 Ze status=0009 04:22:36 Check angles 04:22:36 SkyScan query 04:22:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.89<-15926 Statuses=0008 0009 04:22:37 Msec=3000 True Az=112.995 Ze=-58.89 Az status=0008 Ze status=0009 04:22:37 Check angles 04:22:37 SkyScan query 04:22:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.92<-14528 Statuses=0008 0009 04:22:37 Msec=3750 True Az=112.995 Ze=-37.92 Az status=0008 Ze status=0009 04:22:37 Check angles 04:22:37 SkyScan query 04:22:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.965<-13131 Statuses=0008 0009 04:22:38 Msec=4500 True Az=112.995 Ze=-16.965 Az status=0008 Ze status=0009 04:22:38 Check angles 04:22:38 SkyScan query 04:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 04:22:39 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 04:22:39 Check angles 04:22:39 SkyScan query 04:22:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:22:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:22:40 Message to Master queued w/err=0: serial=75831 error=0 04:22:45 Received message from Master: op=Filter serial=75832 04:22:45 Color wheel filter change from 0 to 0 04:22:45 FLIGetFilterPos err=0 currentPosition=0 04:22:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:45 Filter is already there-color wheel unchanged 04:22:45 Received message from Master: op=Shutter serial=75833 04:22:45 Shutter LASER close 04:22:45 Received message from Camera: op=State serial=75835 04:22:45 GetSingleValue result=40 Value=cccccccc 04:22:45 SkyScan query 04:22:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:22:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:45 Parameters OK 04:22:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:45 Set A/D data flow result=40 04:22:45 Set A/D channel type result=40 04:22:45 Set A/D encoding result=40 04:22:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:45 Set channel filter=0.000000e+000 result=40 04:22:45 Config A/D Result=40 04:22:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:45 Get A/D filter: -9.255963e+061 result=40 04:22:45 Get A/D value=-858993460 result=40 04:22:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:45 Parameters OK 04:22:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:45 Set A/D data flow result=40 04:22:45 Set A/D channel type result=40 04:22:45 Set A/D encoding result=40 04:22:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:45 Set channel filter=0.000000e+000 result=40 04:22:45 Config A/D Result=40 04:22:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:45 Get A/D filter: -9.255963e+061 result=40 04:22:45 Get A/D value=-858993460 result=40 04:22:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:45 Aux= 04:22:45 Message to Camera, serial 75835 queued 04:23:22 Received message from Master: op=PointingHead serial=75848 04:23:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:23:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:23:23 Point started: ret=0 04:23:23 point_skyscan result=0 04:23:23 Check angles 04:23:23 SkyScan query 04:23:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:23:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:23:24 Message to Master queued w/err=0: serial=75848 error=0 04:23:29 Received message from Master: op=Filter serial=75849 04:23:29 Color wheel filter change from 0 to 0 04:23:29 FLIGetFilterPos err=0 currentPosition=0 04:23:29 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:29 Filter is already there-color wheel unchanged 04:23:29 Received message from Master: op=Shutter serial=75850 04:23:29 Shutter LASER close 04:23:29 Received message from Camera: op=State serial=75852 04:23:29 GetSingleValue result=40 Value=cccccccc 04:23:29 SkyScan query 04:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:23:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:30 Parameters OK 04:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:30 Set A/D data flow result=40 04:23:30 Set A/D channel type result=40 04:23:30 Set A/D encoding result=40 04:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:30 Set channel filter=0.000000e+000 result=40 04:23:30 Config A/D Result=40 04:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:30 Get A/D filter: -9.255963e+061 result=40 04:23:30 Get A/D value=-858993460 result=40 04:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:30 Parameters OK 04:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:30 Set A/D data flow result=40 04:23:30 Set A/D channel type result=40 04:23:30 Set A/D encoding result=40 04:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:30 Set channel filter=0.000000e+000 result=40 04:23:30 Config A/D Result=40 04:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:30 Get A/D filter: -9.255963e+061 result=40 04:23:30 Get A/D value=-858993460 result=40 04:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:30 Aux= 04:23:30 Message to Camera, serial 75852 queued [UTC 2019-3-3 04:23:50] 04:24:07 Received message from Master: op=PointingHead serial=75865 04:24:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:24:07 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:24:07 Point started: ret=0 04:24:07 point_skyscan result=0 04:24:08 Check angles 04:24:08 SkyScan query 04:24:08 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.495<-12433 Statuses=0009 0008 04:24:08 Msec=0 True Az=135.96 Ze=-6.495 Az status=0009 Ze status=0008 04:24:08 Check angles 04:24:08 SkyScan query 04:24:09 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.48<-12432 Statuses=0009 0008 04:24:09 Msec=750 True Az=153.555 Ze=-6.48 Az status=0009 Ze status=0008 04:24:09 Check angles 04:24:09 SkyScan query 04:24:10 SkyScan query done: ret=0 az=170.97<-11398 ze=-6.48<-12432 Statuses=0009 0008 04:24:10 Msec=1500 True Az=170.97 Ze=-6.48 Az status=0009 Ze status=0008 04:24:10 Check angles 04:24:10 SkyScan query 04:24:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:24:11 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 04:24:11 Message to Master queued w/err=0: serial=75865 error=0 04:24:16 Received message from Master: op=Filter serial=75866 04:24:16 Color wheel filter change from 0 to 0 04:24:16 FLIGetFilterPos err=0 currentPosition=0 04:24:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:16 Filter is already there-color wheel unchanged 04:24:16 Received message from Master: op=Shutter serial=75867 04:24:16 Shutter LASER close 04:24:16 Received message from Camera: op=State serial=75869 04:24:16 GetSingleValue result=40 Value=cccccccc 04:24:16 SkyScan query 04:24:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:24:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:16 Parameters OK 04:24:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:16 Set A/D data flow result=40 04:24:16 Set A/D channel type result=40 04:24:16 Set A/D encoding result=40 04:24:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:16 Set channel filter=0.000000e+000 result=40 04:24:16 Config A/D Result=40 04:24:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:16 Get A/D filter: -9.255963e+061 result=40 04:24:16 Get A/D value=-858993460 result=40 04:24:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:16 Parameters OK 04:24:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:16 Set A/D data flow result=40 04:24:16 Set A/D channel type result=40 04:24:16 Set A/D encoding result=40 04:24:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:16 Set channel filter=0.000000e+000 result=40 04:24:16 Config A/D Result=40 04:24:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:16 Get A/D filter: -9.255963e+061 result=40 04:24:16 Get A/D value=-858993460 result=40 04:24:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:16 Aux= 04:24:16 Message to Camera, serial 75869 queued 04:24:53 Received message from Master: op=PointingHead serial=75882 04:24:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:24:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:24:54 Point started: ret=0 04:24:54 point_skyscan result=0 04:24:54 Check angles 04:24:54 SkyScan query 04:24:55 SkyScan query done: ret=0 az=152.805<-10187 ze=6.51<-11566 Statuses=0009 0008 04:24:55 Msec=0 True Az=152.805 Ze=6.51 Az status=0009 Ze status=0008 04:24:55 Check angles 04:24:55 SkyScan query 04:24:56 SkyScan query done: ret=0 az=135.285<-9019 ze=6.495<-11567 Statuses=0009 0008 04:24:56 Msec=750 True Az=135.285 Ze=6.495 Az status=0009 Ze status=0008 04:24:56 Check angles 04:24:56 SkyScan query 04:24:56 SkyScan query done: ret=0 az=117.795<-7853 ze=6.495<-11567 Statuses=0009 0008 04:24:56 Msec=1500 True Az=117.795 Ze=6.495 Az status=0009 Ze status=0008 04:24:57 Check angles 04:24:57 SkyScan query 04:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:24:57 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:24:57 Message to Master queued w/err=0: serial=75882 error=0 04:25:02 Received message from Master: op=Filter serial=75883 04:25:02 Color wheel filter change from 0 to 0 04:25:02 FLIGetFilterPos err=0 currentPosition=0 04:25:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:02 Filter is already there-color wheel unchanged 04:25:02 Received message from Master: op=Shutter serial=75884 04:25:02 Shutter LASER close 04:25:02 Received message from Camera: op=State serial=75886 04:25:02 GetSingleValue result=40 Value=cccccccc 04:25:02 SkyScan query 04:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:25:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:03 Parameters OK 04:25:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:03 Set A/D data flow result=40 04:25:03 Set A/D channel type result=40 04:25:03 Set A/D encoding result=40 04:25:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:03 Set channel filter=0.000000e+000 result=40 04:25:03 Config A/D Result=40 04:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:03 Get A/D filter: -9.255963e+061 result=40 04:25:03 Get A/D value=-858993460 result=40 04:25:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:03 Parameters OK 04:25:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:03 Set A/D data flow result=40 04:25:03 Set A/D channel type result=40 04:25:03 Set A/D encoding result=40 04:25:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:03 Set channel filter=0.000000e+000 result=40 04:25:03 Config A/D Result=40 04:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:03 Get A/D filter: -9.255963e+061 result=40 04:25:03 Get A/D value=-858993460 result=40 04:25:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:03 Aux= 04:25:03 Message to Camera, serial 75886 queued 04:25:40 Received message from Master: op=PointingHead serial=75899 04:25:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:25:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:25:40 Point started: ret=0 04:25:40 point_skyscan result=0 04:25:41 Check angles 04:25:41 SkyScan query 04:25:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 04:25:41 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 04:25:42 Check angles 04:25:42 SkyScan query 04:25:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 04:25:42 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 04:25:42 Check angles 04:25:42 SkyScan query 04:25:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 04:25:43 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 04:25:43 Check angles 04:25:43 SkyScan query 04:25:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 04:25:44 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 04:25:44 Check angles 04:25:44 SkyScan query 04:25:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.775<-19185 Statuses=0008 0009 04:25:44 Msec=3000 True Az=112.995 Ze=-107.775 Az status=0008 Ze status=0009 04:25:45 Check angles 04:25:45 SkyScan query 04:25:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 04:25:45 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 04:25:45 Check angles 04:25:45 SkyScan query 04:25:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 04:25:46 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 04:25:46 Check angles 04:25:46 SkyScan query 04:25:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0008 0009 04:25:47 Msec=5250 True Az=112.995 Ze=-170.955 Az status=0008 Ze status=0009 04:25:47 Check angles 04:25:47 SkyScan query 04:25:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:25:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:25:48 Message to Master queued w/err=0: serial=75899 error=0 04:25:53 Received message from Master: op=Filter serial=75900 04:25:53 Color wheel filter change from 0 to 0 04:25:53 FLIGetFilterPos err=0 currentPosition=0 04:25:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:53 Filter is already there-color wheel unchanged 04:25:53 Received message from Master: op=Shutter serial=75901 04:25:53 Shutter LASER open 04:25:53 Received message from Camera: op=State serial=75903 04:25:53 GetSingleValue result=40 Value=cccccccc 04:25:53 SkyScan query 04:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:25:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:53 Parameters OK 04:25:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:53 Set A/D data flow result=40 04:25:53 Set A/D channel type result=40 04:25:53 Set A/D encoding result=40 04:25:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:53 Set channel filter=0.000000e+000 result=40 04:25:53 Config A/D Result=40 04:25:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:53 Get A/D filter: -9.255963e+061 result=40 04:25:53 Get A/D value=-858993460 result=40 04:25:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:53 Parameters OK 04:25:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:53 Set A/D data flow result=40 04:25:53 Set A/D channel type result=40 04:25:53 Set A/D encoding result=40 04:25:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:53 Set channel filter=0.000000e+000 result=40 04:25:53 Config A/D Result=40 04:25:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:53 Get A/D filter: -9.255963e+061 result=40 04:25:53 Get A/D value=-858993460 result=40 04:25:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:53 Aux= 04:25:53 Message to Camera, serial 75903 queued 04:26:02 Received message from Master: op=Shutter serial=75913 04:26:02 Shutter LASER close 04:26:02 Received message from Master: op=PointingHead serial=75917 04:26:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:26:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:26:03 Point started: ret=0 04:26:03 point_skyscan result=0 04:26:03 Check angles 04:26:03 SkyScan query 04:26:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 04:26:04 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 04:26:04 Check angles 04:26:04 SkyScan query 04:26:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 04:26:05 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 04:26:05 Check angles 04:26:05 SkyScan query 04:26:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 04:26:05 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 04:26:06 Check angles 04:26:06 SkyScan query 04:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 04:26:06 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 04:26:06 Check angles 04:26:06 SkyScan query 04:26:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 04:26:07 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 04:26:07 Check angles 04:26:07 SkyScan query 04:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.1<-14540 Statuses=0008 0009 04:26:08 Msec=3750 True Az=112.995 Ze=-38.1 Az status=0008 Ze status=0009 04:26:08 Check angles 04:26:08 SkyScan query 04:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.175<-13145 Statuses=0008 0009 04:26:08 Msec=4500 True Az=112.995 Ze=-17.175 Az status=0008 Ze status=0009 04:26:09 Check angles 04:26:09 SkyScan query 04:26:09 SkyScan query done: ret=0 az=112.995<-7533 ze=3.795<-11747 Statuses=0008 0009 04:26:09 Msec=5250 True Az=112.995 Ze=3.795 Az status=0008 Ze status=0009 04:26:09 Check angles 04:26:09 SkyScan query 04:26:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:26:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:26:10 Message to Master queued w/err=0: serial=75917 error=0 04:26:15 Received message from Master: op=Filter serial=75918 04:26:15 Color wheel filter change from 0 to 0 04:26:15 FLIGetFilterPos err=0 currentPosition=0 04:26:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:15 Filter is already there-color wheel unchanged 04:26:15 Received message from Master: op=Shutter serial=75919 04:26:15 Shutter LASER close 04:26:15 Received message from Camera: op=State serial=75921 04:26:15 GetSingleValue result=40 Value=cccccccc 04:26:15 SkyScan query 04:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:26:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:16 Parameters OK 04:26:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:16 Set A/D data flow result=40 04:26:16 Set A/D channel type result=40 04:26:16 Set A/D encoding result=40 04:26:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:16 Set channel filter=0.000000e+000 result=40 04:26:16 Config A/D Result=40 04:26:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:16 Get A/D filter: -9.255963e+061 result=40 04:26:16 Get A/D value=-858993460 result=40 04:26:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:16 Parameters OK 04:26:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:16 Set A/D data flow result=40 04:26:16 Set A/D channel type result=40 04:26:16 Set A/D encoding result=40 04:26:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:16 Set channel filter=0.000000e+000 result=40 04:26:16 Config A/D Result=40 04:26:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:16 Get A/D filter: -9.255963e+061 result=40 04:26:16 Get A/D value=-858993460 result=40 04:26:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:16 Aux= 04:26:16 Message to Camera, serial 75921 queued 04:26:53 Received message from Master: op=PointingHead serial=75934 04:26:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:26:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:26:53 Point started: ret=0 04:26:53 point_skyscan result=0 04:26:54 Check angles 04:26:54 SkyScan query 04:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:26:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:26:54 Message to Master queued w/err=0: serial=75934 error=0 04:26:59 Received message from Master: op=Filter serial=75935 04:26:59 Color wheel filter change from 0 to 0 04:26:59 FLIGetFilterPos err=0 currentPosition=0 04:26:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:59 Filter is already there-color wheel unchanged 04:27:00 Received message from Master: op=Shutter serial=75936 04:27:00 Shutter LASER close 04:27:00 Received message from Camera: op=State serial=75938 04:27:00 GetSingleValue result=40 Value=cccccccc 04:27:00 SkyScan query 04:27:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:27:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:00 Parameters OK 04:27:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:00 Set A/D data flow result=40 04:27:00 Set A/D channel type result=40 04:27:00 Set A/D encoding result=40 04:27:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:00 Set channel filter=0.000000e+000 result=40 04:27:00 Config A/D Result=40 04:27:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:00 Get A/D filter: -9.255963e+061 result=40 04:27:00 Get A/D value=-858993460 result=40 04:27:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:00 Parameters OK 04:27:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:00 Set A/D data flow result=40 04:27:00 Set A/D channel type result=40 04:27:00 Set A/D encoding result=40 04:27:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:00 Set channel filter=0.000000e+000 result=40 04:27:00 Config A/D Result=40 04:27:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:00 Get A/D filter: -9.255963e+061 result=40 04:27:00 Get A/D value=-858993460 result=40 04:27:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:00 Aux= 04:27:00 Message to Camera, serial 75938 queued 04:27:37 Received message from Master: op=PointingHead serial=75951 04:27:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:27:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:27:37 Point started: ret=0 04:27:37 point_skyscan result=0 04:27:38 Check angles 04:27:38 SkyScan query 04:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:27:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:27:39 Message to Master queued w/err=0: serial=75951 error=0 04:27:44 Received message from Master: op=Filter serial=75952 04:27:44 Color wheel filter change from 0 to 0 04:27:44 FLIGetFilterPos err=0 currentPosition=0 04:27:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:44 Filter is already there-color wheel unchanged 04:27:44 Received message from Master: op=Shutter serial=75953 04:27:44 Shutter LASER close 04:27:44 Received message from Camera: op=State serial=75955 04:27:44 GetSingleValue result=40 Value=cccccccc 04:27:44 SkyScan query 04:27:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:27:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:44 Parameters OK 04:27:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:44 Set A/D data flow result=40 04:27:44 Set A/D channel type result=40 04:27:44 Set A/D encoding result=40 04:27:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:44 Set channel filter=0.000000e+000 result=40 04:27:44 Config A/D Result=40 04:27:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:44 Get A/D filter: -9.255963e+061 result=40 04:27:44 Get A/D value=-858993460 result=40 04:27:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:44 Parameters OK 04:27:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:44 Set A/D data flow result=40 04:27:44 Set A/D channel type result=40 04:27:44 Set A/D encoding result=40 04:27:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:44 Set channel filter=0.000000e+000 result=40 04:27:44 Config A/D Result=40 04:27:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:44 Get A/D filter: -9.255963e+061 result=40 04:27:44 Get A/D value=-858993460 result=40 04:27:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:44 Aux= 04:27:44 Message to Camera, serial 75955 queued 04:28:21 Received message from Master: op=PointingHead serial=75968 04:28:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:28:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:28:22 Point started: ret=0 04:28:22 point_skyscan result=0 04:28:22 Check angles 04:28:22 SkyScan query 04:28:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:28:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:28:23 Message to Master queued w/err=0: serial=75968 error=0 04:28:28 Received message from Master: op=Filter serial=75969 04:28:28 Color wheel filter change from 0 to 0 04:28:28 FLIGetFilterPos err=0 currentPosition=0 04:28:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:28 Filter is already there-color wheel unchanged 04:28:28 Received message from Master: op=Shutter serial=75970 04:28:28 Shutter LASER close 04:28:28 Received message from Camera: op=State serial=75972 04:28:28 GetSingleValue result=40 Value=cccccccc 04:28:28 SkyScan query 04:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:28:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:29 Parameters OK 04:28:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:29 Set A/D data flow result=40 04:28:29 Set A/D channel type result=40 04:28:29 Set A/D encoding result=40 04:28:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:29 Set channel filter=0.000000e+000 result=40 04:28:29 Config A/D Result=40 04:28:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:29 Get A/D filter: -9.255963e+061 result=40 04:28:29 Get A/D value=-858993460 result=40 04:28:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:29 Parameters OK 04:28:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:29 Set A/D data flow result=40 04:28:29 Set A/D channel type result=40 04:28:29 Set A/D encoding result=40 04:28:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:29 Set channel filter=0.000000e+000 result=40 04:28:29 Config A/D Result=40 04:28:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:29 Get A/D filter: -9.255963e+061 result=40 04:28:29 Get A/D value=-858993460 result=40 04:28:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:29 Aux= 04:28:29 Message to Camera, serial 75972 queued 04:29:06 Received message from Master: op=PointingHead serial=75985 04:29:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:29:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:29:06 Point started: ret=0 04:29:06 point_skyscan result=0 04:29:07 Check angles 04:29:07 SkyScan query 04:29:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 04:29:07 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 04:29:07 Check angles 04:29:07 SkyScan query 04:29:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 04:29:08 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 04:29:08 Check angles 04:29:08 SkyScan query 04:29:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 04:29:09 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 04:29:09 Check angles 04:29:09 SkyScan query 04:29:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.355<-17757 Statuses=0008 0009 04:29:10 Msec=2250 True Az=112.995 Ze=-86.355 Az status=0008 Ze status=0009 04:29:10 Check angles 04:29:10 SkyScan query 04:29:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 04:29:10 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 04:29:10 Check angles 04:29:10 SkyScan query 04:29:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.25<-20550 Statuses=0008 0009 04:29:11 Msec=3750 True Az=112.995 Ze=-128.25 Az status=0008 Ze status=0009 04:29:11 Check angles 04:29:11 SkyScan query 04:29:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.22<-21948 Statuses=0008 0009 04:29:12 Msec=4500 True Az=112.995 Ze=-149.22 Az status=0008 Ze status=0009 04:29:12 Check angles 04:29:12 SkyScan query 04:29:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.16<-23344 Statuses=0008 0009 04:29:13 Msec=5250 True Az=112.995 Ze=-170.16 Az status=0008 Ze status=0009 04:29:13 Check angles 04:29:13 SkyScan query 04:29:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:29:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:29:13 Message to Master queued w/err=0: serial=75985 error=0 04:29:18 Received message from Master: op=Filter serial=75986 04:29:18 Color wheel filter change from 0 to 0 04:29:18 FLIGetFilterPos err=0 currentPosition=0 04:29:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:18 Filter is already there-color wheel unchanged 04:29:18 Received message from Master: op=Shutter serial=75987 04:29:18 Shutter LASER open 04:29:19 Received message from Camera: op=State serial=75989 04:29:19 GetSingleValue result=40 Value=cccccccc 04:29:19 SkyScan query 04:29:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:29:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:19 Parameters OK 04:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:19 Set A/D data flow result=40 04:29:19 Set A/D channel type result=40 04:29:19 Set A/D encoding result=40 04:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:19 Set channel filter=0.000000e+000 result=40 04:29:19 Config A/D Result=40 04:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:19 Get A/D filter: -9.255963e+061 result=40 04:29:19 Get A/D value=-858993460 result=40 04:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:19 Parameters OK 04:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:19 Set A/D data flow result=40 04:29:19 Set A/D channel type result=40 04:29:19 Set A/D encoding result=40 04:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:19 Set channel filter=0.000000e+000 result=40 04:29:19 Config A/D Result=40 04:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:19 Get A/D filter: -9.255963e+061 result=40 04:29:19 Get A/D value=-858993460 result=40 04:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:19 Aux= 04:29:19 Message to Camera, serial 75989 queued 04:29:28 Received message from Master: op=Shutter serial=75999 04:29:28 Shutter LASER close 04:29:28 Received message from Master: op=PointingHead serial=76003 04:29:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:29:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:29:29 Point started: ret=0 04:29:29 point_skyscan result=0 04:29:29 Check angles 04:29:29 SkyScan query 04:29:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 04:29:30 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 04:29:30 Check angles 04:29:30 SkyScan query 04:29:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 04:29:31 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 04:29:31 Check angles 04:29:31 SkyScan query 04:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.37<-18758 Statuses=0008 0009 04:29:32 Msec=1500 True Az=112.995 Ze=-101.37 Az status=0008 Ze status=0009 04:29:32 Check angles 04:29:32 SkyScan query 04:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.415<-17361 Statuses=0008 0009 04:29:32 Msec=2250 True Az=112.995 Ze=-80.415 Az status=0008 Ze status=0009 04:29:32 Check angles 04:29:32 SkyScan query 04:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.46<-15964 Statuses=0008 0009 04:29:33 Msec=3000 True Az=112.995 Ze=-59.46 Az status=0008 Ze status=0009 04:29:33 Check angles 04:29:33 SkyScan query 04:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.49<-14566 Statuses=0008 0009 04:29:34 Msec=3750 True Az=112.995 Ze=-38.49 Az status=0008 Ze status=0009 04:29:34 Check angles 04:29:34 SkyScan query 04:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.55<-13170 Statuses=0008 0009 04:29:35 Msec=4500 True Az=112.995 Ze=-17.55 Az status=0008 Ze status=0009 04:29:35 Check angles 04:29:35 SkyScan query 04:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=3.405<-11773 Statuses=0008 0009 04:29:35 Msec=5250 True Az=112.995 Ze=3.405 Az status=0008 Ze status=0009 04:29:35 Check angles 04:29:35 SkyScan query 04:29:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:29:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:29:36 Message to Master queued w/err=0: serial=76003 error=0 04:29:41 Received message from Master: op=Filter serial=76004 04:29:41 Color wheel filter change from 0 to 0 04:29:41 FLIGetFilterPos err=0 currentPosition=0 04:29:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:41 Filter is already there-color wheel unchanged 04:29:41 Received message from Master: op=Shutter serial=76005 04:29:41 Shutter LASER close 04:29:41 Received message from Camera: op=State serial=76007 04:29:41 GetSingleValue result=40 Value=cccccccc 04:29:41 SkyScan query 04:29:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:29:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:42 Parameters OK 04:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:42 Set A/D data flow result=40 04:29:42 Set A/D channel type result=40 04:29:42 Set A/D encoding result=40 04:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:42 Set channel filter=0.000000e+000 result=40 04:29:42 Config A/D Result=40 04:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:42 Get A/D filter: -9.255963e+061 result=40 04:29:42 Get A/D value=-858993460 result=40 04:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:42 Parameters OK 04:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:42 Set A/D data flow result=40 04:29:42 Set A/D channel type result=40 04:29:42 Set A/D encoding result=40 04:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:42 Set channel filter=0.000000e+000 result=40 04:29:42 Config A/D Result=40 04:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:42 Get A/D filter: -9.255963e+061 result=40 04:29:42 Get A/D value=-858993460 result=40 04:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:42 Aux= 04:29:42 Message to Camera, serial 76007 queued 04:30:19 Received message from Master: op=PointingHead serial=76020 04:30:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:30:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:30:19 Point started: ret=0 04:30:19 point_skyscan result=0 04:30:20 Check angles 04:30:20 SkyScan query 04:30:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:30:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:30:20 Message to Master queued w/err=0: serial=76020 error=0 04:30:25 Received message from Master: op=Filter serial=76021 04:30:25 Color wheel filter change from 0 to 0 04:30:25 FLIGetFilterPos err=0 currentPosition=0 04:30:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:25 Filter is already there-color wheel unchanged 04:30:26 Received message from Master: op=Shutter serial=76022 04:30:26 Shutter LASER close 04:30:26 Received message from Camera: op=State serial=76024 04:30:26 GetSingleValue result=40 Value=cccccccc 04:30:26 SkyScan query 04:30:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:30:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:26 Parameters OK 04:30:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:26 Set A/D data flow result=40 04:30:26 Set A/D channel type result=40 04:30:26 Set A/D encoding result=40 04:30:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:26 Set channel filter=0.000000e+000 result=40 04:30:26 Config A/D Result=40 04:30:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:26 Get A/D filter: -9.255963e+061 result=40 04:30:26 Get A/D value=-858993460 result=40 04:30:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:26 Parameters OK 04:30:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:26 Set A/D data flow result=40 04:30:26 Set A/D channel type result=40 04:30:26 Set A/D encoding result=40 04:30:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:26 Set channel filter=0.000000e+000 result=40 04:30:26 Config A/D Result=40 04:30:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:26 Get A/D filter: -9.255963e+061 result=40 04:30:26 Get A/D value=-858993460 result=40 04:30:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:26 Aux= 04:30:26 Message to Camera, serial 76024 queued 04:31:03 Received message from Master: op=PointingHead serial=76037 04:31:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:31:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:31:03 Point started: ret=0 04:31:03 point_skyscan result=0 04:31:04 Check angles 04:31:04 SkyScan query 04:31:05 SkyScan query done: ret=0 az=136.26<-9084 ze=-6.51<-12434 Statuses=0009 0008 04:31:05 Msec=0 True Az=136.26 Ze=-6.51 Az status=0009 Ze status=0008 04:31:05 Check angles 04:31:05 SkyScan query 04:31:06 SkyScan query done: ret=0 az=153.765<-10251 ze=-6.495<-12433 Statuses=0009 0008 04:31:06 Msec=750 True Az=153.765 Ze=-6.495 Az status=0009 Ze status=0008 04:31:06 Check angles 04:31:06 SkyScan query 04:31:06 SkyScan query done: ret=0 az=171.27<-11418 ze=-6.495<-12433 Statuses=0009 0008 04:31:06 Msec=1500 True Az=171.27 Ze=-6.495 Az status=0009 Ze status=0008 04:31:06 Check angles 04:31:06 SkyScan query 04:31:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:31:07 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:31:07 Message to Master queued w/err=0: serial=76037 error=0 04:31:12 Received message from Master: op=Filter serial=76038 04:31:12 Color wheel filter change from 0 to 0 04:31:12 FLIGetFilterPos err=0 currentPosition=0 04:31:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:12 Filter is already there-color wheel unchanged 04:31:12 Received message from Master: op=Shutter serial=76039 04:31:12 Shutter LASER close 04:31:12 Received message from Camera: op=State serial=76041 04:31:12 GetSingleValue result=40 Value=cccccccc 04:31:12 SkyScan query 04:31:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:31:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:13 Parameters OK 04:31:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:13 Set A/D data flow result=40 04:31:13 Set A/D channel type result=40 04:31:13 Set A/D encoding result=40 04:31:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:13 Set channel filter=0.000000e+000 result=40 04:31:13 Config A/D Result=40 04:31:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:13 Get A/D filter: -9.255963e+061 result=40 04:31:13 Get A/D value=-858993460 result=40 04:31:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:13 Parameters OK 04:31:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:13 Set A/D data flow result=40 04:31:13 Set A/D channel type result=40 04:31:13 Set A/D encoding result=40 04:31:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:13 Set channel filter=0.000000e+000 result=40 04:31:13 Config A/D Result=40 04:31:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:13 Get A/D filter: -9.255963e+061 result=40 04:31:13 Get A/D value=-858993460 result=40 04:31:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:13 Aux= 04:31:13 Message to Camera, serial 76041 queued 04:31:50 Received message from Master: op=PointingHead serial=76054 04:31:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:31:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:31:50 Point started: ret=0 04:31:50 point_skyscan result=0 04:31:51 Check angles 04:31:51 SkyScan query 04:31:51 SkyScan query done: ret=0 az=152.805<-10187 ze=6.51<-11566 Statuses=0009 0008 04:31:51 Msec=0 True Az=152.805 Ze=6.51 Az status=0009 Ze status=0008 04:31:51 Check angles 04:31:51 SkyScan query 04:31:52 SkyScan query done: ret=0 az=135.285<-9019 ze=6.495<-11567 Statuses=0009 0008 04:31:52 Msec=750 True Az=135.285 Ze=6.495 Az status=0009 Ze status=0008 04:31:52 Check angles 04:31:52 SkyScan query 04:31:53 SkyScan query done: ret=0 az=117.765<-7851 ze=6.495<-11567 Statuses=0009 0008 04:31:53 Msec=1500 True Az=117.765 Ze=6.495 Az status=0009 Ze status=0008 04:31:53 Check angles 04:31:53 SkyScan query 04:31:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:31:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:31:54 Message to Master queued w/err=0: serial=76054 error=0 04:31:59 Received message from Master: op=Filter serial=76055 04:31:59 Color wheel filter change from 0 to 0 04:31:59 FLIGetFilterPos err=0 currentPosition=0 04:31:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:59 Filter is already there-color wheel unchanged 04:31:59 Received message from Master: op=Shutter serial=76056 04:31:59 Shutter LASER close 04:31:59 Received message from Camera: op=State serial=76058 04:31:59 GetSingleValue result=40 Value=cccccccc 04:31:59 SkyScan query 04:31:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:31:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:59 Parameters OK 04:31:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:59 Set A/D data flow result=40 04:31:59 Set A/D channel type result=40 04:31:59 Set A/D encoding result=40 04:31:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:59 Set channel filter=0.000000e+000 result=40 04:31:59 Config A/D Result=40 04:31:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:59 Get A/D filter: -9.255963e+061 result=40 04:31:59 Get A/D value=-858993460 result=40 04:31:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:59 Parameters OK 04:31:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:59 Set A/D data flow result=40 04:31:59 Set A/D channel type result=40 04:31:59 Set A/D encoding result=40 04:31:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:59 Set channel filter=0.000000e+000 result=40 04:31:59 Config A/D Result=40 04:31:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:59 Get A/D filter: -9.255963e+061 result=40 04:31:59 Get A/D value=-858993460 result=40 04:31:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:59 Aux= 04:31:59 Message to Camera, serial 76058 queued 04:32:36 Received message from Master: op=PointingHead serial=76071 04:32:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:32:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:32:37 Point started: ret=0 04:32:37 point_skyscan result=0 04:32:37 Check angles 04:32:37 SkyScan query 04:32:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 04:32:38 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 04:32:38 Check angles 04:32:38 SkyScan query 04:32:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 04:32:39 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 04:32:39 Check angles 04:32:39 SkyScan query 04:32:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.025<-16335 Statuses=0008 0009 04:32:39 Msec=1500 True Az=112.995 Ze=-65.025 Az status=0008 Ze status=0009 04:32:40 Check angles 04:32:40 SkyScan query 04:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 04:32:40 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 04:32:40 Check angles 04:32:40 SkyScan query 04:32:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.34<-19156 Statuses=0008 0009 04:32:41 Msec=3000 True Az=112.995 Ze=-107.34 Az status=0008 Ze status=0009 04:32:41 Check angles 04:32:41 SkyScan query 04:32:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.31<-20554 Statuses=0008 0009 04:32:42 Msec=3750 True Az=112.995 Ze=-128.31 Az status=0008 Ze status=0009 04:32:42 Check angles 04:32:42 SkyScan query 04:32:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 04:32:42 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 04:32:43 Check angles 04:32:43 SkyScan query 04:32:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0008 0009 04:32:43 Msec=5250 True Az=112.995 Ze=-170.97 Az status=0008 Ze status=0009 04:32:43 Check angles 04:32:43 SkyScan query 04:32:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:32:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:32:44 Message to Master queued w/err=0: serial=76071 error=0 04:32:49 Received message from Master: op=Filter serial=76072 04:32:49 Color wheel filter change from 0 to 0 04:32:49 FLIGetFilterPos err=0 currentPosition=0 04:32:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:49 Filter is already there-color wheel unchanged 04:32:49 Received message from Master: op=Shutter serial=76073 04:32:49 Shutter LASER open 04:32:49 Received message from Camera: op=State serial=76075 04:32:49 GetSingleValue result=40 Value=cccccccc 04:32:49 SkyScan query 04:32:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:32:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:50 Parameters OK 04:32:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:50 Set A/D data flow result=40 04:32:50 Set A/D channel type result=40 04:32:50 Set A/D encoding result=40 04:32:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:50 Set channel filter=0.000000e+000 result=40 04:32:50 Config A/D Result=40 04:32:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:50 Get A/D filter: -9.255963e+061 result=40 04:32:50 Get A/D value=-858993460 result=40 04:32:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:50 Parameters OK 04:32:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:50 Set A/D data flow result=40 04:32:50 Set A/D channel type result=40 04:32:50 Set A/D encoding result=40 04:32:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:50 Set channel filter=0.000000e+000 result=40 04:32:50 Config A/D Result=40 04:32:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:50 Get A/D filter: -9.255963e+061 result=40 04:32:50 Get A/D value=-858993460 result=40 04:32:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:32:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:32:50 Aux= 04:32:50 Message to Camera, serial 76075 queued 04:32:58 Received message from Master: op=Shutter serial=76085 04:32:58 Shutter LASER close 04:32:59 Received message from Master: op=PointingHead serial=76089 04:32:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:32:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:32:59 Point started: ret=0 04:32:59 point_skyscan result=0 04:33:00 Check angles 04:33:00 SkyScan query 04:33:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 04:33:00 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 04:33:01 Check angles 04:33:01 SkyScan query 04:33:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 04:33:01 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 04:33:01 Check angles 04:33:01 SkyScan query 04:33:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.55<-18770 Statuses=0008 0009 04:33:02 Msec=1500 True Az=112.995 Ze=-101.55 Az status=0008 Ze status=0009 04:33:02 Check angles 04:33:02 SkyScan query 04:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 04:33:03 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 04:33:03 Check angles 04:33:03 SkyScan query 04:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 04:33:03 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 04:33:04 Check angles 04:33:04 SkyScan query 04:33:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.235<-14549 Statuses=0008 0009 04:33:04 Msec=3750 True Az=112.995 Ze=-38.235 Az status=0008 Ze status=0009 04:33:04 Check angles 04:33:04 SkyScan query 04:33:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 04:33:05 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 04:33:05 Check angles 04:33:05 SkyScan query 04:33:06 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 04:33:06 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 04:33:06 Check angles 04:33:06 SkyScan query 04:33:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:33:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:33:06 Message to Master queued w/err=0: serial=76089 error=0 04:33:11 Received message from Master: op=Filter serial=76090 04:33:11 Color wheel filter change from 0 to 0 04:33:11 FLIGetFilterPos err=0 currentPosition=0 04:33:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:11 Filter is already there-color wheel unchanged 04:33:12 Received message from Master: op=Shutter serial=76091 04:33:12 Shutter LASER close 04:33:12 Received message from Camera: op=State serial=76093 04:33:12 GetSingleValue result=40 Value=cccccccc 04:33:12 SkyScan query 04:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:12 Parameters OK 04:33:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:12 Set A/D data flow result=40 04:33:12 Set A/D channel type result=40 04:33:12 Set A/D encoding result=40 04:33:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:12 Set channel filter=0.000000e+000 result=40 04:33:12 Config A/D Result=40 04:33:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:12 Get A/D filter: -9.255963e+061 result=40 04:33:12 Get A/D value=-858993460 result=40 04:33:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:12 Parameters OK 04:33:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:12 Set A/D data flow result=40 04:33:12 Set A/D channel type result=40 04:33:12 Set A/D encoding result=40 04:33:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:12 Set channel filter=0.000000e+000 result=40 04:33:12 Config A/D Result=40 04:33:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:12 Get A/D filter: -9.255963e+061 result=40 04:33:12 Get A/D value=-858993460 result=40 04:33:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:12 Aux= 04:33:12 Message to Camera, serial 76093 queued 04:33:38 Received message from Master: op=Identify serial=76094 04:33:49 Received message from Master: op=PointingHead serial=76109 04:33:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:33:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:33:49 Point started: ret=0 04:33:49 point_skyscan result=0 04:33:50 Check angles 04:33:50 SkyScan query 04:33:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:33:51 Message to Master queued w/err=0: serial=76109 error=0 04:33:56 Received message from Master: op=Filter serial=76110 04:33:56 Color wheel filter change from 0 to 0 04:33:56 FLIGetFilterPos err=0 currentPosition=0 04:33:56 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:56 Filter is already there-color wheel unchanged 04:33:56 Received message from Master: op=Shutter serial=76111 04:33:56 Shutter LASER close 04:33:56 Received message from Camera: op=State serial=76113 04:33:56 GetSingleValue result=40 Value=cccccccc 04:33:56 SkyScan query 04:33:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:57 Parameters OK 04:33:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:57 Set A/D data flow result=40 04:33:57 Set A/D channel type result=40 04:33:57 Set A/D encoding result=40 04:33:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:57 Set channel filter=0.000000e+000 result=40 04:33:57 Config A/D Result=40 04:33:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:57 Get A/D filter: -9.255963e+061 result=40 04:33:57 Get A/D value=-858993460 result=40 04:33:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:57 Parameters OK 04:33:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:57 Set A/D data flow result=40 [UTC 2019-3-3 04:33:57] 04:33:57 Set A/D channel type result=40 04:33:57 Set A/D encoding result=40 04:33:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:57 Set channel filter=0.000000e+000 result=40 04:33:57 Config A/D Result=40 04:33:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:57 Get A/D filter: -9.255963e+061 result=40 04:33:57 Get A/D value=-858993460 result=40 04:33:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:57 Aux= 04:33:57 Message to Camera, serial 76113 queued 04:34:34 Received message from Master: op=PointingHead serial=76126 04:34:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:34:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:34:34 Point started: ret=0 04:34:34 point_skyscan result=0 04:34:35 Check angles 04:34:35 SkyScan query 04:34:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:34:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:34:35 Message to Master queued w/err=0: serial=76126 error=0 04:34:40 Received message from Master: op=Filter serial=76127 04:34:40 Color wheel filter change from 0 to 0 04:34:40 FLIGetFilterPos err=0 currentPosition=0 04:34:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:40 Filter is already there-color wheel unchanged 04:34:40 Received message from Master: op=Shutter serial=76128 04:34:40 Shutter LASER close 04:34:40 Received message from Camera: op=State serial=76130 04:34:40 GetSingleValue result=40 Value=cccccccc 04:34:40 SkyScan query 04:34:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:34:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:41 Parameters OK 04:34:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:41 Set A/D data flow result=40 04:34:41 Set A/D channel type result=40 04:34:41 Set A/D encoding result=40 04:34:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:41 Set channel filter=0.000000e+000 result=40 04:34:41 Config A/D Result=40 04:34:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:41 Get A/D filter: -9.255963e+061 result=40 04:34:41 Get A/D value=-858993460 result=40 04:34:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:41 Parameters OK 04:34:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:41 Set A/D data flow result=40 04:34:41 Set A/D channel type result=40 04:34:41 Set A/D encoding result=40 04:34:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:41 Set channel filter=0.000000e+000 result=40 04:34:41 Config A/D Result=40 04:34:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:41 Get A/D filter: -9.255963e+061 result=40 04:34:41 Get A/D value=-858993460 result=40 04:34:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:41 Aux= 04:34:41 Message to Camera, serial 76130 queued 04:35:18 Received message from Master: op=PointingHead serial=76143 04:35:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:35:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:35:18 Point started: ret=0 04:35:18 point_skyscan result=0 04:35:19 Check angles 04:35:19 SkyScan query 04:35:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:35:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:35:19 Message to Master queued w/err=0: serial=76143 error=0 04:35:24 Received message from Master: op=Filter serial=76144 04:35:24 Color wheel filter change from 0 to 0 04:35:24 FLIGetFilterPos err=0 currentPosition=0 04:35:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:24 Filter is already there-color wheel unchanged 04:35:25 Received message from Master: op=Shutter serial=76145 04:35:25 Shutter LASER close 04:35:25 Received message from Camera: op=State serial=76147 04:35:25 GetSingleValue result=40 Value=cccccccc 04:35:25 SkyScan query 04:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:35:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:25 Parameters OK 04:35:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:25 Set A/D data flow result=40 04:35:25 Set A/D channel type result=40 04:35:25 Set A/D encoding result=40 04:35:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:25 Set channel filter=0.000000e+000 result=40 04:35:25 Config A/D Result=40 04:35:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:25 Get A/D filter: -9.255963e+061 result=40 04:35:25 Get A/D value=-858993460 result=40 04:35:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:25 Parameters OK 04:35:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:25 Set A/D data flow result=40 04:35:25 Set A/D channel type result=40 04:35:25 Set A/D encoding result=40 04:35:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:25 Set channel filter=0.000000e+000 result=40 04:35:25 Config A/D Result=40 04:35:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:25 Get A/D filter: -9.255963e+061 result=40 04:35:25 Get A/D value=-858993460 result=40 04:35:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:25 Aux= 04:35:25 Message to Camera, serial 76147 queued 04:36:01 Received message from Master: op=PointingHead serial=76159 04:36:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:36:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:36:02 Point started: ret=0 04:36:02 point_skyscan result=0 04:36:02 Check angles 04:36:02 SkyScan query 04:36:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 04:36:03 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 04:36:03 Check angles 04:36:03 SkyScan query 04:36:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.045<-15003 Statuses=0008 0009 04:36:04 Msec=750 True Az=112.995 Ze=-45.045 Az status=0008 Ze status=0009 04:36:04 Check angles 04:36:04 SkyScan query 04:36:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.97<-16398 Statuses=0008 0009 04:36:04 Msec=1500 True Az=112.995 Ze=-65.97 Az status=0008 Ze status=0009 04:36:05 Check angles 04:36:05 SkyScan query 04:36:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.925<-17795 Statuses=0008 0009 04:36:05 Msec=2250 True Az=112.995 Ze=-86.925 Az status=0008 Ze status=0009 04:36:05 Check angles 04:36:05 SkyScan query 04:36:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 04:36:06 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 04:36:06 Check angles 04:36:06 SkyScan query 04:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.805<-20587 Statuses=0008 0009 04:36:07 Msec=3750 True Az=112.995 Ze=-128.805 Az status=0008 Ze status=0009 04:36:07 Check angles 04:36:07 SkyScan query 04:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.775<-21985 Statuses=0008 0009 04:36:07 Msec=4500 True Az=112.995 Ze=-149.775 Az status=0008 Ze status=0009 04:36:08 Check angles 04:36:08 SkyScan query 04:36:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.685<-23379 Statuses=0008 0009 04:36:08 Msec=5250 True Az=112.995 Ze=-170.685 Az status=0008 Ze status=0009 04:36:08 Check angles 04:36:08 SkyScan query 04:36:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:36:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:36:09 Message to Master queued w/err=0: serial=76159 error=0 04:36:14 Received message from Master: op=Filter serial=76160 04:36:14 Color wheel filter change from 0 to 0 04:36:14 FLIGetFilterPos err=0 currentPosition=0 04:36:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:14 Filter is already there-color wheel unchanged 04:36:14 Received message from Master: op=Shutter serial=76161 04:36:14 Shutter LASER open 04:36:14 Received message from Camera: op=State serial=76163 04:36:14 GetSingleValue result=40 Value=cccccccc 04:36:14 SkyScan query 04:36:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:36:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:15 Parameters OK 04:36:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:15 Set A/D data flow result=40 04:36:15 Set A/D channel type result=40 04:36:15 Set A/D encoding result=40 04:36:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:15 Set channel filter=0.000000e+000 result=40 04:36:15 Config A/D Result=40 04:36:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:15 Get A/D filter: -9.255963e+061 result=40 04:36:15 Get A/D value=-858993460 result=40 04:36:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:15 Parameters OK 04:36:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:15 Set A/D data flow result=40 04:36:15 Set A/D channel type result=40 04:36:15 Set A/D encoding result=40 04:36:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:15 Set channel filter=0.000000e+000 result=40 04:36:15 Config A/D Result=40 04:36:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:15 Get A/D filter: -9.255963e+061 result=40 04:36:15 Get A/D value=-858993460 result=40 04:36:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:15 Aux= 04:36:15 Message to Camera, serial 76163 queued 04:36:23 Received message from Master: op=Shutter serial=76173 04:36:23 Shutter LASER close 04:36:24 Received message from Master: op=PointingHead serial=76177 04:36:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:36:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:36:24 Point started: ret=0 04:36:24 point_skyscan result=0 04:36:25 Check angles 04:36:25 SkyScan query 04:36:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 04:36:25 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 04:36:26 Check angles 04:36:26 SkyScan query 04:36:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 04:36:26 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 04:36:26 Check angles 04:36:26 SkyScan query 04:36:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 04:36:27 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 04:36:27 Check angles 04:36:27 SkyScan query 04:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 04:36:28 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 04:36:28 Check angles 04:36:28 SkyScan query 04:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.5<-15900 Statuses=0008 0009 04:36:28 Msec=3000 True Az=112.995 Ze=-58.5 Az status=0008 Ze status=0009 04:36:29 Check angles 04:36:29 SkyScan query 04:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 04:36:29 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 04:36:29 Check angles 04:36:29 SkyScan query 04:36:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 04:36:30 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 04:36:30 Check angles 04:36:30 SkyScan query 04:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=4.65<-11690 Statuses=0008 0009 04:36:31 Msec=5250 True Az=112.995 Ze=4.65 Az status=0008 Ze status=0009 04:36:31 Check angles 04:36:31 SkyScan query 04:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:36:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:36:31 Message to Master queued w/err=0: serial=76177 error=0 04:36:36 Received message from Master: op=Filter serial=76178 04:36:36 Color wheel filter change from 0 to 0 04:36:36 FLIGetFilterPos err=0 currentPosition=0 04:36:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:36 Filter is already there-color wheel unchanged 04:36:37 Received message from Master: op=Shutter serial=76179 04:36:37 Shutter LASER close 04:36:37 Received message from Camera: op=State serial=76181 04:36:37 GetSingleValue result=40 Value=cccccccc 04:36:37 SkyScan query 04:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:36:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:37 Parameters OK 04:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:37 Set A/D data flow result=40 04:36:37 Set A/D channel type result=40 04:36:37 Set A/D encoding result=40 04:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:37 Set channel filter=0.000000e+000 result=40 04:36:37 Config A/D Result=40 04:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:37 Get A/D filter: -9.255963e+061 result=40 04:36:37 Get A/D value=-858993460 result=40 04:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:37 Parameters OK 04:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:37 Set A/D data flow result=40 04:36:37 Set A/D channel type result=40 04:36:37 Set A/D encoding result=40 04:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:37 Set channel filter=0.000000e+000 result=40 04:36:37 Config A/D Result=40 04:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:37 Get A/D filter: -9.255963e+061 result=40 04:36:37 Get A/D value=-858993460 result=40 04:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:37 Aux= 04:36:37 Message to Camera, serial 76181 queued 04:37:14 Received message from Master: op=PointingHead serial=76194 04:37:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:37:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:37:15 Point started: ret=0 04:37:15 point_skyscan result=0 04:37:15 Check angles 04:37:15 SkyScan query 04:37:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:37:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:37:16 Message to Master queued w/err=0: serial=76194 error=0 04:37:21 Received message from Master: op=Filter serial=76195 04:37:21 Color wheel filter change from 0 to 0 04:37:21 FLIGetFilterPos err=0 currentPosition=0 04:37:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:21 Filter is already there-color wheel unchanged 04:37:21 Received message from Master: op=Shutter serial=76196 04:37:21 Shutter LASER close 04:37:21 Received message from Camera: op=State serial=76198 04:37:21 GetSingleValue result=40 Value=cccccccc 04:37:21 SkyScan query 04:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:37:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:22 Parameters OK 04:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:22 Set A/D data flow result=40 04:37:22 Set A/D channel type result=40 04:37:22 Set A/D encoding result=40 04:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:22 Set channel filter=0.000000e+000 result=40 04:37:22 Config A/D Result=40 04:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:22 Get A/D filter: -9.255963e+061 result=40 04:37:22 Get A/D value=-858993460 result=40 04:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:22 Parameters OK 04:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:22 Set A/D data flow result=40 04:37:22 Set A/D channel type result=40 04:37:22 Set A/D encoding result=40 04:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:22 Set channel filter=0.000000e+000 result=40 04:37:22 Config A/D Result=40 04:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:22 Get A/D filter: -9.255963e+061 result=40 04:37:22 Get A/D value=-858993460 result=40 04:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:22 Aux= 04:37:22 Message to Camera, serial 76198 queued 04:37:59 Received message from Master: op=PointingHead serial=76211 04:37:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:37:59 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:37:59 Point started: ret=0 04:37:59 point_skyscan result=0 04:38:00 Check angles 04:38:00 SkyScan query 04:38:00 SkyScan query done: ret=0 az=136.035<-9069 ze=-6.51<-12434 Statuses=0009 0008 04:38:00 Msec=0 True Az=136.035 Ze=-6.51 Az status=0009 Ze status=0008 04:38:00 Check angles 04:38:00 SkyScan query 04:38:01 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 04:38:01 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 04:38:01 Check angles 04:38:01 SkyScan query 04:38:02 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 04:38:02 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 04:38:02 Check angles 04:38:02 SkyScan query 04:38:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:38:02 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:38:02 Message to Master queued w/err=0: serial=76211 error=0 04:38:07 Received message from Master: op=Filter serial=76212 04:38:07 Color wheel filter change from 0 to 0 04:38:07 FLIGetFilterPos err=0 currentPosition=0 04:38:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:07 Filter is already there-color wheel unchanged 04:38:08 Received message from Master: op=Shutter serial=76213 04:38:08 Shutter LASER close 04:38:08 Received message from Camera: op=State serial=76215 04:38:08 GetSingleValue result=40 Value=cccccccc 04:38:08 SkyScan query 04:38:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:38:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:08 Parameters OK 04:38:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:08 Set A/D data flow result=40 04:38:08 Set A/D channel type result=40 04:38:08 Set A/D encoding result=40 04:38:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:08 Set channel filter=0.000000e+000 result=40 04:38:08 Config A/D Result=40 04:38:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:08 Get A/D filter: -9.255963e+061 result=40 04:38:08 Get A/D value=-858993460 result=40 04:38:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:08 Parameters OK 04:38:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:08 Set A/D data flow result=40 04:38:08 Set A/D channel type result=40 04:38:08 Set A/D encoding result=40 04:38:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:08 Set channel filter=0.000000e+000 result=40 04:38:08 Config A/D Result=40 04:38:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:08 Get A/D filter: -9.255963e+061 result=40 04:38:08 Get A/D value=-858993460 result=40 04:38:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:08 Aux= 04:38:08 Message to Camera, serial 76215 queued 04:38:45 Received message from Master: op=PointingHead serial=76228 04:38:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:38:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:38:46 Point started: ret=0 04:38:46 point_skyscan result=0 04:38:46 Check angles 04:38:46 SkyScan query 04:38:47 SkyScan query done: ret=0 az=152.565<-10171 ze=6.51<-11566 Statuses=0009 0008 04:38:47 Msec=0 True Az=152.565 Ze=6.51 Az status=0009 Ze status=0008 04:38:47 Check angles 04:38:47 SkyScan query 04:38:48 SkyScan query done: ret=0 az=134.715<-8981 ze=6.495<-11567 Statuses=0009 0008 04:38:48 Msec=750 True Az=134.715 Ze=6.495 Az status=0009 Ze status=0008 04:38:48 Check angles 04:38:48 SkyScan query 04:38:48 SkyScan query done: ret=0 az=117.255<-7817 ze=6.495<-11567 Statuses=0009 0008 04:38:48 Msec=1500 True Az=117.255 Ze=6.495 Az status=0009 Ze status=0008 04:38:49 Check angles 04:38:49 SkyScan query 04:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:38:49 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:38:49 Message to Master queued w/err=0: serial=76228 error=0 04:38:54 Received message from Master: op=Filter serial=76229 04:38:54 Color wheel filter change from 0 to 0 04:38:54 FLIGetFilterPos err=0 currentPosition=0 04:38:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:54 Filter is already there-color wheel unchanged 04:38:54 Received message from Master: op=Shutter serial=76230 04:38:54 Shutter LASER close 04:38:54 Received message from Camera: op=State serial=76232 04:38:54 GetSingleValue result=40 Value=cccccccc 04:38:54 SkyScan query 04:38:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:38:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:55 Parameters OK 04:38:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:55 Set A/D data flow result=40 04:38:55 Set A/D channel type result=40 04:38:55 Set A/D encoding result=40 04:38:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:55 Set channel filter=0.000000e+000 result=40 04:38:55 Config A/D Result=40 04:38:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:55 Get A/D filter: -9.255963e+061 result=40 04:38:55 Get A/D value=-858993460 result=40 04:38:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:55 Parameters OK 04:38:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:55 Set A/D data flow result=40 04:38:55 Set A/D channel type result=40 04:38:55 Set A/D encoding result=40 04:38:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:55 Set channel filter=0.000000e+000 result=40 04:38:55 Config A/D Result=40 04:38:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:55 Get A/D filter: -9.255963e+061 result=40 04:38:55 Get A/D value=-858993460 result=40 04:38:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:55 Aux= 04:38:55 Message to Camera, serial 76232 queued 04:39:32 Received message from Master: op=PointingHead serial=76245 04:39:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:39:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:39:32 Point started: ret=0 04:39:32 point_skyscan result=0 04:39:33 Check angles 04:39:33 SkyScan query 04:39:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 04:39:33 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 04:39:34 Check angles 04:39:34 SkyScan query 04:39:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 04:39:34 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 04:39:34 Check angles 04:39:34 SkyScan query 04:39:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.61<-16374 Statuses=0008 0009 04:39:35 Msec=1500 True Az=112.995 Ze=-65.61 Az status=0008 Ze status=0009 04:39:35 Check angles 04:39:35 SkyScan query 04:39:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.565<-17771 Statuses=0008 0009 04:39:36 Msec=2250 True Az=112.995 Ze=-86.565 Az status=0008 Ze status=0009 04:39:36 Check angles 04:39:36 SkyScan query 04:39:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 04:39:36 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 04:39:37 Check angles 04:39:37 SkyScan query 04:39:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 04:39:37 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 04:39:37 Check angles 04:39:37 SkyScan query 04:39:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.415<-21961 Statuses=0008 0009 04:39:38 Msec=4500 True Az=112.995 Ze=-149.415 Az status=0008 Ze status=0009 04:39:38 Check angles 04:39:38 SkyScan query 04:39:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.37<-23358 Statuses=0008 0009 04:39:39 Msec=5250 True Az=112.995 Ze=-170.37 Az status=0008 Ze status=0009 04:39:39 Check angles 04:39:39 SkyScan query 04:39:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:39:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:39:39 Message to Master queued w/err=0: serial=76245 error=0 04:39:44 Received message from Master: op=Filter serial=76246 04:39:44 Color wheel filter change from 0 to 0 04:39:44 FLIGetFilterPos err=0 currentPosition=0 04:39:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:44 Filter is already there-color wheel unchanged 04:39:45 Received message from Master: op=Shutter serial=76247 04:39:45 Shutter LASER open 04:39:45 Received message from Camera: op=State serial=76249 04:39:45 GetSingleValue result=40 Value=cccccccc 04:39:45 SkyScan query 04:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:39:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:45 Parameters OK 04:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:45 Set A/D data flow result=40 04:39:45 Set A/D channel type result=40 04:39:45 Set A/D encoding result=40 04:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:45 Set channel filter=0.000000e+000 result=40 04:39:45 Config A/D Result=40 04:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:45 Get A/D filter: -9.255963e+061 result=40 04:39:45 Get A/D value=-858993460 result=40 04:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:45 Parameters OK 04:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:45 Set A/D data flow result=40 04:39:45 Set A/D channel type result=40 04:39:45 Set A/D encoding result=40 04:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:45 Set channel filter=0.000000e+000 result=40 04:39:45 Config A/D Result=40 04:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:45 Get A/D filter: -9.255963e+061 result=40 04:39:45 Get A/D value=-858993460 result=40 04:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:45 Aux= 04:39:45 Message to Camera, serial 76249 queued 04:39:54 Received message from Master: op=Shutter serial=76259 04:39:54 Shutter LASER close 04:39:54 Received message from Master: op=PointingHead serial=76263 04:39:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:39:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:39:55 Point started: ret=0 04:39:55 point_skyscan result=0 04:39:55 Check angles 04:39:55 SkyScan query 04:39:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 04:39:56 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 04:39:56 Check angles 04:39:56 SkyScan query 04:39:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 04:39:57 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 04:39:57 Check angles 04:39:57 SkyScan query 04:39:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.235<-18749 Statuses=0008 0009 04:39:57 Msec=1500 True Az=112.995 Ze=-101.235 Az status=0008 Ze status=0009 04:39:58 Check angles 04:39:58 SkyScan query 04:39:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 04:39:58 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 04:39:58 Check angles 04:39:58 SkyScan query 04:39:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.905<-15927 Statuses=0008 0009 04:39:59 Msec=3000 True Az=112.995 Ze=-58.905 Az status=0008 Ze status=0009 04:39:59 Check angles 04:39:59 SkyScan query 04:40:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.935<-14529 Statuses=0008 0009 04:40:00 Msec=3750 True Az=112.995 Ze=-37.935 Az status=0008 Ze status=0009 04:40:00 Check angles 04:40:00 SkyScan query 04:40:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.53<-13102 Statuses=0008 0009 04:40:00 Msec=4500 True Az=112.995 Ze=-16.53 Az status=0008 Ze status=0009 04:40:01 Check angles 04:40:01 SkyScan query 04:40:01 SkyScan query done: ret=0 az=112.995<-7533 ze=4.35<-11710 Statuses=0008 0009 04:40:01 Msec=5250 True Az=112.995 Ze=4.35 Az status=0008 Ze status=0009 04:40:01 Check angles 04:40:01 SkyScan query 04:40:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:40:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:40:02 Message to Master queued w/err=0: serial=76263 error=0 04:40:07 Received message from Master: op=Filter serial=76264 04:40:07 Color wheel filter change from 0 to 0 04:40:07 FLIGetFilterPos err=0 currentPosition=0 04:40:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:07 Filter is already there-color wheel unchanged 04:40:07 Received message from Master: op=Shutter serial=76265 04:40:07 Shutter LASER close 04:40:07 Received message from Camera: op=State serial=76267 04:40:07 GetSingleValue result=40 Value=cccccccc 04:40:07 SkyScan query 04:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:40:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:08 Parameters OK 04:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:08 Set A/D data flow result=40 04:40:08 Set A/D channel type result=40 04:40:08 Set A/D encoding result=40 04:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:08 Set channel filter=0.000000e+000 result=40 04:40:08 Config A/D Result=40 04:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:08 Get A/D filter: -9.255963e+061 result=40 04:40:08 Get A/D value=-858993460 result=40 04:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:08 Parameters OK 04:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:08 Set A/D data flow result=40 04:40:08 Set A/D channel type result=40 04:40:08 Set A/D encoding result=40 04:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:08 Set channel filter=0.000000e+000 result=40 04:40:08 Config A/D Result=40 04:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:08 Get A/D filter: -9.255963e+061 result=40 04:40:08 Get A/D value=-858993460 result=40 04:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:08 Aux= 04:40:08 Message to Camera, serial 76267 queued 04:40:45 Received message from Master: op=PointingHead serial=76280 04:40:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:40:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:40:45 Point started: ret=0 04:40:45 point_skyscan result=0 04:40:46 Check angles 04:40:46 SkyScan query 04:40:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:40:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:40:46 Message to Master queued w/err=0: serial=76280 error=0 04:40:51 Received message from Master: op=Filter serial=76281 04:40:51 Color wheel filter change from 0 to 0 04:40:51 FLIGetFilterPos err=0 currentPosition=0 04:40:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:51 Filter is already there-color wheel unchanged 04:40:52 Received message from Master: op=Shutter serial=76282 04:40:52 Shutter LASER close 04:40:52 Received message from Camera: op=State serial=76284 04:40:52 GetSingleValue result=40 Value=cccccccc 04:40:52 SkyScan query 04:40:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:40:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:52 Parameters OK 04:40:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:52 Set A/D data flow result=40 04:40:52 Set A/D channel type result=40 04:40:52 Set A/D encoding result=40 04:40:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:52 Set channel filter=0.000000e+000 result=40 04:40:52 Config A/D Result=40 04:40:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:52 Get A/D filter: -9.255963e+061 result=40 04:40:52 Get A/D value=-858993460 result=40 04:40:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:52 Parameters OK 04:40:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:52 Set A/D data flow result=40 04:40:52 Set A/D channel type result=40 04:40:52 Set A/D encoding result=40 04:40:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:52 Set channel filter=0.000000e+000 result=40 04:40:52 Config A/D Result=40 04:40:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:52 Get A/D filter: -9.255963e+061 result=40 04:40:52 Get A/D value=-858993460 result=40 04:40:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:52 Aux= 04:40:52 Message to Camera, serial 76284 queued 04:41:29 Received message from Master: op=PointingHead serial=76297 04:41:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:41:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:41:29 Point started: ret=0 04:41:29 point_skyscan result=0 04:41:30 Check angles 04:41:30 SkyScan query 04:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:41:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:41:31 Message to Master queued w/err=0: serial=76297 error=0 04:41:36 Received message from Master: op=Filter serial=76298 04:41:36 Color wheel filter change from 0 to 0 04:41:36 FLIGetFilterPos err=0 currentPosition=0 04:41:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:36 Filter is already there-color wheel unchanged 04:41:36 Received message from Master: op=Shutter serial=76299 04:41:36 Shutter LASER close 04:41:36 Received message from Camera: op=State serial=76301 04:41:36 GetSingleValue result=40 Value=cccccccc 04:41:36 SkyScan query 04:41:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:41:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:36 Parameters OK 04:41:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:36 Set A/D data flow result=40 04:41:36 Set A/D channel type result=40 04:41:36 Set A/D encoding result=40 04:41:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:36 Set channel filter=0.000000e+000 result=40 04:41:36 Config A/D Result=40 04:41:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:36 Get A/D filter: -9.255963e+061 result=40 04:41:36 Get A/D value=-858993460 result=40 04:41:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:36 Parameters OK 04:41:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:36 Set A/D data flow result=40 04:41:36 Set A/D channel type result=40 04:41:36 Set A/D encoding result=40 04:41:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:36 Set channel filter=0.000000e+000 result=40 04:41:36 Config A/D Result=40 04:41:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:36 Get A/D filter: -9.255963e+061 result=40 04:41:36 Get A/D value=-858993460 result=40 04:41:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:36 Aux= 04:41:36 Message to Camera, serial 76301 queued 04:42:13 Received message from Master: op=PointingHead serial=76314 04:42:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:42:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:42:14 Point started: ret=0 04:42:14 point_skyscan result=0 04:42:14 Check angles 04:42:14 SkyScan query 04:42:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:42:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:42:15 Message to Master queued w/err=0: serial=76314 error=0 04:42:20 Received message from Master: op=Filter serial=76315 04:42:20 Color wheel filter change from 0 to 0 04:42:20 FLIGetFilterPos err=0 currentPosition=0 04:42:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:20 Filter is already there-color wheel unchanged 04:42:20 Received message from Master: op=Shutter serial=76316 04:42:20 Shutter LASER close 04:42:20 Received message from Camera: op=State serial=76318 04:42:20 GetSingleValue result=40 Value=cccccccc 04:42:20 SkyScan query 04:42:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:42:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:21 Parameters OK 04:42:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:21 Set A/D data flow result=40 04:42:21 Set A/D channel type result=40 04:42:21 Set A/D encoding result=40 04:42:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:21 Set channel filter=0.000000e+000 result=40 04:42:21 Config A/D Result=40 04:42:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:21 Get A/D filter: -9.255963e+061 result=40 04:42:21 Get A/D value=-858993460 result=40 04:42:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:21 Parameters OK 04:42:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:21 Set A/D data flow result=40 04:42:21 Set A/D channel type result=40 04:42:21 Set A/D encoding result=40 04:42:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:21 Set channel filter=0.000000e+000 result=40 04:42:21 Config A/D Result=40 04:42:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:21 Get A/D filter: -9.255963e+061 result=40 04:42:21 Get A/D value=-858993460 result=40 04:42:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:21 Aux= 04:42:21 Message to Camera, serial 76318 queued 04:42:58 Received message from Master: op=PointingHead serial=76331 04:42:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:42:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:42:58 Point started: ret=0 04:42:58 point_skyscan result=0 04:42:59 Check angles 04:42:59 SkyScan query 04:42:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 04:42:59 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 04:42:59 Check angles 04:42:59 SkyScan query 04:43:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 04:43:00 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 04:43:00 Check angles 04:43:00 SkyScan query 04:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 04:43:01 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 04:43:01 Check angles 04:43:01 SkyScan query 04:43:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.58<-17772 Statuses=0008 0009 04:43:02 Msec=2250 True Az=112.995 Ze=-86.58 Az status=0008 Ze status=0009 04:43:02 Check angles 04:43:02 SkyScan query 04:43:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 04:43:02 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 04:43:02 Check angles 04:43:02 SkyScan query 04:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.91<-20594 Statuses=0008 0009 04:43:03 Msec=3750 True Az=112.995 Ze=-128.91 Az status=0008 Ze status=0009 04:43:03 Check angles 04:43:03 SkyScan query 04:43:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.865<-21991 Statuses=0008 0009 04:43:04 Msec=4500 True Az=112.995 Ze=-149.865 Az status=0008 Ze status=0009 04:43:04 Check angles 04:43:04 SkyScan query 04:43:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.76<-23384 Statuses=0008 0009 04:43:05 Msec=5250 True Az=112.995 Ze=-170.76 Az status=0008 Ze status=0009 04:43:05 Check angles 04:43:05 SkyScan query 04:43:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:43:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:43:05 Message to Master queued w/err=0: serial=76331 error=0 04:43:10 Received message from Master: op=Filter serial=76332 04:43:10 Color wheel filter change from 0 to 0 04:43:10 FLIGetFilterPos err=0 currentPosition=0 04:43:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:10 Filter is already there-color wheel unchanged 04:43:10 Received message from Master: op=Shutter serial=76333 04:43:10 Shutter LASER open 04:43:11 Received message from Camera: op=State serial=76335 04:43:11 GetSingleValue result=40 Value=cccccccc 04:43:11 SkyScan query 04:43:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:43:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:11 Parameters OK 04:43:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:11 Set A/D data flow result=40 04:43:11 Set A/D channel type result=40 04:43:11 Set A/D encoding result=40 04:43:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:11 Set channel filter=0.000000e+000 result=40 04:43:11 Config A/D Result=40 04:43:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:11 Get A/D filter: -9.255963e+061 result=40 04:43:11 Get A/D value=-858993460 result=40 04:43:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:11 Parameters OK 04:43:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:11 Set A/D data flow result=40 04:43:11 Set A/D channel type result=40 04:43:11 Set A/D encoding result=40 04:43:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:11 Set channel filter=0.000000e+000 result=40 04:43:11 Config A/D Result=40 04:43:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:11 Get A/D filter: -9.255963e+061 result=40 04:43:11 Get A/D value=-858993460 result=40 04:43:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:11 Aux= 04:43:11 Message to Camera, serial 76335 queued 04:43:20 Received message from Master: op=Shutter serial=76345 04:43:20 Shutter LASER close 04:43:20 Received message from Master: op=PointingHead serial=76349 04:43:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:43:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:43:21 Point started: ret=0 04:43:21 point_skyscan result=0 04:43:21 Check angles 04:43:21 SkyScan query 04:43:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.905<-21527 Statuses=0008 0009 04:43:22 Msec=0 True Az=112.995 Ze=-142.905 Az status=0008 Ze status=0009 04:43:22 Check angles 04:43:22 SkyScan query 04:43:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.515<-20101 Statuses=0008 0009 04:43:23 Msec=750 True Az=112.995 Ze=-121.515 Az status=0008 Ze status=0009 04:43:23 Check angles 04:43:23 SkyScan query 04:43:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.56<-18704 Statuses=0008 0009 04:43:24 Msec=1500 True Az=112.995 Ze=-100.56 Az status=0008 Ze status=0009 04:43:24 Check angles 04:43:24 SkyScan query 04:43:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.605<-17307 Statuses=0008 0009 04:43:24 Msec=2250 True Az=112.995 Ze=-79.605 Az status=0008 Ze status=0009 04:43:24 Check angles 04:43:24 SkyScan query 04:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.65<-15910 Statuses=0008 0009 04:43:25 Msec=3000 True Az=112.995 Ze=-58.65 Az status=0008 Ze status=0009 04:43:25 Check angles 04:43:25 SkyScan query 04:43:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.695<-14513 Statuses=0008 0009 04:43:26 Msec=3750 True Az=112.995 Ze=-37.695 Az status=0008 Ze status=0009 04:43:26 Check angles 04:43:26 SkyScan query 04:43:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.74<-13116 Statuses=0008 0009 04:43:27 Msec=4500 True Az=112.995 Ze=-16.74 Az status=0008 Ze status=0009 04:43:27 Check angles 04:43:27 SkyScan query 04:43:27 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 04:43:27 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 04:43:27 Check angles 04:43:27 SkyScan query 04:43:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:43:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:43:28 Message to Master queued w/err=0: serial=76349 error=0 04:43:33 Received message from Master: op=Filter serial=76350 04:43:33 Color wheel filter change from 0 to 0 04:43:33 FLIGetFilterPos err=0 currentPosition=0 04:43:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:33 Filter is already there-color wheel unchanged 04:43:33 Received message from Master: op=Shutter serial=76351 04:43:33 Shutter LASER close 04:43:33 Received message from Camera: op=State serial=76353 04:43:33 GetSingleValue result=40 Value=cccccccc 04:43:33 SkyScan query 04:43:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:43:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:34 Parameters OK 04:43:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:34 Set A/D data flow result=40 04:43:34 Set A/D channel type result=40 04:43:34 Set A/D encoding result=40 04:43:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:34 Set channel filter=0.000000e+000 result=40 04:43:34 Config A/D Result=40 04:43:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:34 Get A/D filter: -9.255963e+061 result=40 04:43:34 Get A/D value=-858993460 result=40 04:43:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:34 Parameters OK 04:43:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:34 Set A/D data flow result=40 04:43:34 Set A/D channel type result=40 04:43:34 Set A/D encoding result=40 04:43:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:34 Set channel filter=0.000000e+000 result=40 04:43:34 Config A/D Result=40 04:43:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:34 Get A/D filter: -9.255963e+061 result=40 04:43:34 Get A/D value=-858993460 result=40 04:43:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:34 Aux= 04:43:34 Message to Camera, serial 76353 queued [UTC 2019-3-3 04:43:50] 04:44:11 Received message from Master: op=PointingHead serial=76366 04:44:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:44:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:44:11 Point started: ret=0 04:44:11 point_skyscan result=0 04:44:12 Check angles 04:44:12 SkyScan query 04:44:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:44:12 Message to Master queued w/err=0: serial=76366 error=0 04:44:17 Received message from Master: op=Filter serial=76367 04:44:17 Color wheel filter change from 0 to 0 04:44:17 FLIGetFilterPos err=0 currentPosition=0 04:44:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:17 Filter is already there-color wheel unchanged 04:44:18 Received message from Master: op=Shutter serial=76368 04:44:18 Shutter LASER close 04:44:18 Received message from Camera: op=State serial=76370 04:44:18 GetSingleValue result=40 Value=cccccccc 04:44:18 SkyScan query 04:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:18 Parameters OK 04:44:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:18 Set A/D data flow result=40 04:44:18 Set A/D channel type result=40 04:44:18 Set A/D encoding result=40 04:44:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:18 Set channel filter=0.000000e+000 result=40 04:44:18 Config A/D Result=40 04:44:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:18 Get A/D filter: -9.255963e+061 result=40 04:44:18 Get A/D value=-858993460 result=40 04:44:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:18 Parameters OK 04:44:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:18 Set A/D data flow result=40 04:44:18 Set A/D channel type result=40 04:44:18 Set A/D encoding result=40 04:44:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:18 Set channel filter=0.000000e+000 result=40 04:44:18 Config A/D Result=40 04:44:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:18 Get A/D filter: -9.255963e+061 result=40 04:44:18 Get A/D value=-858993460 result=40 04:44:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:18 Aux= 04:44:18 Message to Camera, serial 76370 queued 04:44:55 Received message from Master: op=PointingHead serial=76383 04:44:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:44:55 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:44:55 Point started: ret=0 04:44:55 point_skyscan result=0 04:44:56 Check angles 04:44:56 SkyScan query 04:44:57 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 04:44:57 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 04:44:57 Check angles 04:44:57 SkyScan query 04:44:57 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.495<-12433 Statuses=0009 0008 04:44:57 Msec=750 True Az=153.795 Ze=-6.495 Az status=0009 Ze status=0008 04:44:58 Check angles 04:44:58 SkyScan query 04:44:58 SkyScan query done: ret=0 az=171.615<-11441 ze=-6.495<-12433 Statuses=0009 0008 04:44:58 Msec=1500 True Az=171.615 Ze=-6.495 Az status=0009 Ze status=0008 04:44:58 Check angles 04:44:58 SkyScan query 04:44:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:44:59 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:44:59 Message to Master queued w/err=0: serial=76383 error=0 04:45:04 Received message from Master: op=Filter serial=76384 04:45:04 Color wheel filter change from 0 to 0 04:45:04 FLIGetFilterPos err=0 currentPosition=0 04:45:04 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:04 Filter is already there-color wheel unchanged 04:45:04 Received message from Master: op=Shutter serial=76385 04:45:04 Shutter LASER close 04:45:04 Received message from Camera: op=State serial=76387 04:45:04 GetSingleValue result=40 Value=cccccccc 04:45:04 SkyScan query 04:45:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:45:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:05 Parameters OK 04:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:05 Set A/D data flow result=40 04:45:05 Set A/D channel type result=40 04:45:05 Set A/D encoding result=40 04:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:05 Set channel filter=0.000000e+000 result=40 04:45:05 Config A/D Result=40 04:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:05 Get A/D filter: -9.255963e+061 result=40 04:45:05 Get A/D value=-858993460 result=40 04:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:05 Parameters OK 04:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:05 Set A/D data flow result=40 04:45:05 Set A/D channel type result=40 04:45:05 Set A/D encoding result=40 04:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:05 Set channel filter=0.000000e+000 result=40 04:45:05 Config A/D Result=40 04:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:05 Get A/D filter: -9.255963e+061 result=40 04:45:05 Get A/D value=-858993460 result=40 04:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:05 Aux= 04:45:05 Message to Camera, serial 76387 queued 04:45:42 Received message from Master: op=PointingHead serial=76400 04:45:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:45:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:45:42 Point started: ret=0 04:45:42 point_skyscan result=0 04:45:43 Check angles 04:45:43 SkyScan query 04:45:43 SkyScan query done: ret=0 az=152.94<-10196 ze=6.51<-11566 Statuses=0009 0008 04:45:43 Msec=0 True Az=152.94 Ze=6.51 Az status=0009 Ze status=0008 04:45:43 Check angles 04:45:43 SkyScan query 04:45:44 SkyScan query done: ret=0 az=135.51<-9034 ze=6.495<-11567 Statuses=0009 0008 04:45:44 Msec=750 True Az=135.51 Ze=6.495 Az status=0009 Ze status=0008 04:45:44 Check angles 04:45:44 SkyScan query 04:45:45 SkyScan query done: ret=0 az=117.69<-7846 ze=6.495<-11567 Statuses=0009 0008 04:45:45 Msec=1500 True Az=117.69 Ze=6.495 Az status=0009 Ze status=0008 04:45:45 Check angles 04:45:45 SkyScan query 04:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:45:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:45:46 Message to Master queued w/err=0: serial=76400 error=0 04:45:51 Received message from Master: op=Filter serial=76401 04:45:51 Color wheel filter change from 0 to 0 04:45:51 FLIGetFilterPos err=0 currentPosition=0 04:45:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:51 Filter is already there-color wheel unchanged 04:45:51 Received message from Master: op=Shutter serial=76402 04:45:51 Shutter LASER close 04:45:51 Received message from Camera: op=State serial=76404 04:45:51 GetSingleValue result=40 Value=cccccccc 04:45:51 SkyScan query 04:45:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:45:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:51 Parameters OK 04:45:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:51 Set A/D data flow result=40 04:45:51 Set A/D channel type result=40 04:45:51 Set A/D encoding result=40 04:45:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:51 Set channel filter=0.000000e+000 result=40 04:45:51 Config A/D Result=40 04:45:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:51 Get A/D filter: -9.255963e+061 result=40 04:45:51 Get A/D value=-858993460 result=40 04:45:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:51 Parameters OK 04:45:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:51 Set A/D data flow result=40 04:45:51 Set A/D channel type result=40 04:45:51 Set A/D encoding result=40 04:45:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:51 Set channel filter=0.000000e+000 result=40 04:45:51 Config A/D Result=40 04:45:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:51 Get A/D filter: -9.255963e+061 result=40 04:45:51 Get A/D value=-858993460 result=40 04:45:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:51 Aux= 04:45:51 Message to Camera, serial 76404 queued 04:46:28 Received message from Master: op=PointingHead serial=76417 04:46:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:46:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:46:29 Point started: ret=0 04:46:29 point_skyscan result=0 04:46:29 Check angles 04:46:29 SkyScan query 04:46:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 04:46:30 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 04:46:30 Check angles 04:46:30 SkyScan query 04:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 04:46:31 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 04:46:31 Check angles 04:46:31 SkyScan query 04:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.18<-16412 Statuses=0008 0009 04:46:31 Msec=1500 True Az=112.995 Ze=-66.18 Az status=0008 Ze status=0009 04:46:32 Check angles 04:46:32 SkyScan query 04:46:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.135<-17809 Statuses=0008 0009 04:46:32 Msec=2250 True Az=112.995 Ze=-87.135 Az status=0008 Ze status=0009 04:46:32 Check angles 04:46:32 SkyScan query 04:46:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.075<-19205 Statuses=0008 0009 04:46:33 Msec=3000 True Az=112.995 Ze=-108.075 Az status=0008 Ze status=0009 04:46:33 Check angles 04:46:33 SkyScan query 04:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.465<-20631 Statuses=0008 0009 04:46:34 Msec=3750 True Az=112.995 Ze=-129.465 Az status=0008 Ze status=0009 04:46:34 Check angles 04:46:34 SkyScan query 04:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.855<-22057 Statuses=0008 0009 04:46:34 Msec=4500 True Az=112.995 Ze=-150.855 Az status=0008 Ze status=0009 04:46:35 Check angles 04:46:35 SkyScan query 04:46:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0008 0009 04:46:35 Msec=5250 True Az=112.995 Ze=-171.51 Az status=0008 Ze status=0009 04:46:35 Check angles 04:46:35 SkyScan query 04:46:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:46:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:46:36 Message to Master queued w/err=0: serial=76417 error=0 04:46:41 Received message from Master: op=Filter serial=76418 04:46:41 Color wheel filter change from 0 to 0 04:46:41 FLIGetFilterPos err=0 currentPosition=0 04:46:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:41 Filter is already there-color wheel unchanged 04:46:41 Received message from Master: op=Shutter serial=76419 04:46:41 Shutter LASER open 04:46:41 Received message from Camera: op=State serial=76421 04:46:41 GetSingleValue result=40 Value=cccccccc 04:46:41 SkyScan query 04:46:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:46:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:42 Parameters OK 04:46:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:42 Set A/D data flow result=40 04:46:42 Set A/D channel type result=40 04:46:42 Set A/D encoding result=40 04:46:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:42 Set channel filter=0.000000e+000 result=40 04:46:42 Config A/D Result=40 04:46:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:42 Get A/D filter: -9.255963e+061 result=40 04:46:42 Get A/D value=-858993460 result=40 04:46:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:42 Parameters OK 04:46:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:42 Set A/D data flow result=40 04:46:42 Set A/D channel type result=40 04:46:42 Set A/D encoding result=40 04:46:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:42 Set channel filter=0.000000e+000 result=40 04:46:42 Config A/D Result=40 04:46:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:42 Get A/D filter: -9.255963e+061 result=40 04:46:42 Get A/D value=-858993460 result=40 04:46:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:42 Aux= 04:46:42 Message to Camera, serial 76421 queued 04:46:50 Received message from Master: op=Shutter serial=76431 04:46:50 Shutter LASER close 04:46:51 Received message from Master: op=PointingHead serial=76435 04:46:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:46:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:46:51 Point started: ret=0 04:46:51 point_skyscan result=0 04:46:52 Check angles 04:46:52 SkyScan query 04:46:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 04:46:52 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 04:46:53 Check angles 04:46:53 SkyScan query 04:46:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 04:46:53 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 04:46:53 Check angles 04:46:53 SkyScan query 04:46:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 04:46:54 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 04:46:54 Check angles 04:46:54 SkyScan query 04:46:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.74<-17316 Statuses=0008 0009 04:46:55 Msec=2250 True Az=112.995 Ze=-79.74 Az status=0008 Ze status=0009 04:46:55 Check angles 04:46:55 SkyScan query 04:46:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 04:46:55 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 04:46:56 Check angles 04:46:56 SkyScan query 04:46:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.83<-14522 Statuses=0008 0009 04:46:56 Msec=3750 True Az=112.995 Ze=-37.83 Az status=0008 Ze status=0009 04:46:56 Check angles 04:46:56 SkyScan query 04:46:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.425<-13095 Statuses=0008 0009 04:46:57 Msec=4500 True Az=112.995 Ze=-16.425 Az status=0008 Ze status=0009 04:46:57 Check angles 04:46:57 SkyScan query 04:46:58 SkyScan query done: ret=0 az=112.995<-7533 ze=4.425<-11705 Statuses=0008 0009 04:46:58 Msec=5250 True Az=112.995 Ze=4.425 Az status=0008 Ze status=0009 04:46:58 Check angles 04:46:58 SkyScan query 04:46:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:46:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:46:58 Message to Master queued w/err=0: serial=76435 error=0 04:47:03 Received message from Master: op=Filter serial=76436 04:47:03 Color wheel filter change from 0 to 0 04:47:03 FLIGetFilterPos err=0 currentPosition=0 04:47:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:03 Filter is already there-color wheel unchanged 04:47:04 Received message from Master: op=Shutter serial=76437 04:47:04 Shutter LASER close 04:47:04 Received message from Camera: op=State serial=76439 04:47:04 GetSingleValue result=40 Value=cccccccc 04:47:04 SkyScan query 04:47:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:47:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:04 Parameters OK 04:47:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:04 Set A/D data flow result=40 04:47:04 Set A/D channel type result=40 04:47:04 Set A/D encoding result=40 04:47:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:04 Set channel filter=0.000000e+000 result=40 04:47:04 Config A/D Result=40 04:47:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:04 Get A/D filter: -9.255963e+061 result=40 04:47:04 Get A/D value=-858993460 result=40 04:47:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:04 Parameters OK 04:47:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:04 Set A/D data flow result=40 04:47:04 Set A/D channel type result=40 04:47:04 Set A/D encoding result=40 04:47:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:04 Set channel filter=0.000000e+000 result=40 04:47:04 Config A/D Result=40 04:47:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:04 Get A/D filter: -9.255963e+061 result=40 04:47:04 Get A/D value=-858993460 result=40 04:47:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:04 Aux= 04:47:04 Message to Camera, serial 76439 queued 04:47:41 Received message from Master: op=PointingHead serial=76452 04:47:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:47:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:47:42 Point started: ret=0 04:47:42 point_skyscan result=0 04:47:42 Check angles 04:47:42 SkyScan query 04:47:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:47:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:47:43 Message to Master queued w/err=0: serial=76452 error=0 04:47:48 Received message from Master: op=Filter serial=76453 04:47:48 Color wheel filter change from 0 to 0 04:47:48 FLIGetFilterPos err=0 currentPosition=0 04:47:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:48 Filter is already there-color wheel unchanged 04:47:48 Received message from Master: op=Shutter serial=76454 04:47:48 Shutter LASER close 04:47:48 Received message from Camera: op=State serial=76456 04:47:48 GetSingleValue result=40 Value=cccccccc 04:47:48 SkyScan query 04:47:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:47:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:49 Parameters OK 04:47:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:49 Set A/D data flow result=40 04:47:49 Set A/D channel type result=40 04:47:49 Set A/D encoding result=40 04:47:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:49 Set channel filter=0.000000e+000 result=40 04:47:49 Config A/D Result=40 04:47:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:49 Get A/D filter: -9.255963e+061 result=40 04:47:49 Get A/D value=-858993460 result=40 04:47:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:49 Parameters OK 04:47:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:49 Set A/D data flow result=40 04:47:49 Set A/D channel type result=40 04:47:49 Set A/D encoding result=40 04:47:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:49 Set channel filter=0.000000e+000 result=40 04:47:49 Config A/D Result=40 04:47:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:49 Get A/D filter: -9.255963e+061 result=40 04:47:49 Get A/D value=-858993460 result=40 04:47:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:49 Aux= 04:47:49 Message to Camera, serial 76456 queued 04:48:25 Received message from Master: op=PointingHead serial=76468 04:48:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:48:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:48:25 Point started: ret=0 04:48:25 point_skyscan result=0 04:48:26 Check angles 04:48:26 SkyScan query 04:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:48:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:48:26 Message to Master queued w/err=0: serial=76468 error=0 04:48:31 Received message from Master: op=Filter serial=76469 04:48:31 Color wheel filter change from 0 to 0 04:48:31 FLIGetFilterPos err=0 currentPosition=0 04:48:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:31 Filter is already there-color wheel unchanged 04:48:31 Received message from Master: op=Shutter serial=76470 04:48:31 Shutter LASER close 04:48:31 Received message from Camera: op=State serial=76472 04:48:31 GetSingleValue result=40 Value=cccccccc 04:48:31 SkyScan query 04:48:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:48:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:32 Parameters OK 04:48:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:32 Set A/D data flow result=40 04:48:32 Set A/D channel type result=40 04:48:32 Set A/D encoding result=40 04:48:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:32 Set channel filter=0.000000e+000 result=40 04:48:32 Config A/D Result=40 04:48:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:32 Get A/D filter: -9.255963e+061 result=40 04:48:32 Get A/D value=-858993460 result=40 04:48:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:32 Parameters OK 04:48:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:32 Set A/D data flow result=40 04:48:32 Set A/D channel type result=40 04:48:32 Set A/D encoding result=40 04:48:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:32 Set channel filter=0.000000e+000 result=40 04:48:32 Config A/D Result=40 04:48:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:32 Get A/D filter: -9.255963e+061 result=40 04:48:32 Get A/D value=-858993460 result=40 04:48:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:32 Aux= 04:48:32 Message to Camera, serial 76472 queued 04:49:09 Received message from Master: op=PointingHead serial=76485 04:49:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:49:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:49:09 Point started: ret=0 04:49:09 point_skyscan result=0 04:49:10 Check angles 04:49:10 SkyScan query 04:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:49:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:49:11 Message to Master queued w/err=0: serial=76485 error=0 04:49:16 Received message from Master: op=Filter serial=76486 04:49:16 Color wheel filter change from 0 to 0 04:49:16 FLIGetFilterPos err=0 currentPosition=0 04:49:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:16 Filter is already there-color wheel unchanged 04:49:16 Received message from Master: op=Shutter serial=76487 04:49:16 Shutter LASER close 04:49:16 Received message from Camera: op=State serial=76489 04:49:16 GetSingleValue result=40 Value=cccccccc 04:49:16 SkyScan query 04:49:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:49:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:16 Parameters OK 04:49:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:16 Set A/D data flow result=40 04:49:16 Set A/D channel type result=40 04:49:16 Set A/D encoding result=40 04:49:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:16 Set channel filter=0.000000e+000 result=40 04:49:16 Config A/D Result=40 04:49:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:16 Get A/D filter: -9.255963e+061 result=40 04:49:16 Get A/D value=-858993460 result=40 04:49:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:16 Parameters OK 04:49:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:16 Set A/D data flow result=40 04:49:16 Set A/D channel type result=40 04:49:16 Set A/D encoding result=40 04:49:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:16 Set channel filter=0.000000e+000 result=40 04:49:16 Config A/D Result=40 04:49:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:16 Get A/D filter: -9.255963e+061 result=40 04:49:16 Get A/D value=-858993460 result=40 04:49:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:16 Aux= 04:49:16 Message to Camera, serial 76489 queued 04:49:53 Received message from Master: op=PointingHead serial=76502 04:49:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:49:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:49:53 Point started: ret=0 04:49:53 point_skyscan result=0 04:49:54 Check angles 04:49:54 SkyScan query 04:49:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 04:49:55 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 04:49:55 Check angles 04:49:55 SkyScan query 04:49:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 04:49:56 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 04:49:56 Check angles 04:49:56 SkyScan query 04:49:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 04:49:56 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 04:49:56 Check angles 04:49:56 SkyScan query 04:49:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.16<-17744 Statuses=0008 0009 04:49:57 Msec=2250 True Az=112.995 Ze=-86.16 Az status=0008 Ze status=0009 04:49:57 Check angles 04:49:57 SkyScan query 04:49:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.085<-19139 Statuses=0008 0009 04:49:58 Msec=3000 True Az=112.995 Ze=-107.085 Az status=0008 Ze status=0009 04:49:58 Check angles 04:49:58 SkyScan query 04:49:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.04<-20536 Statuses=0008 0009 04:49:59 Msec=3750 True Az=112.995 Ze=-128.04 Az status=0008 Ze status=0009 04:49:59 Check angles 04:49:59 SkyScan query 04:49:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.995<-21933 Statuses=0008 0009 04:49:59 Msec=4500 True Az=112.995 Ze=-148.995 Az status=0008 Ze status=0009 04:49:59 Check angles 04:49:59 SkyScan query 04:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.935<-23329 Statuses=0008 0009 04:50:00 Msec=5250 True Az=112.995 Ze=-169.935 Az status=0008 Ze status=0009 04:50:00 Check angles 04:50:00 SkyScan query 04:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:50:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:50:01 Message to Master queued w/err=0: serial=76502 error=0 04:50:06 Received message from Master: op=Filter serial=76503 04:50:06 Color wheel filter change from 0 to 0 04:50:06 FLIGetFilterPos err=0 currentPosition=0 04:50:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:06 Filter is already there-color wheel unchanged 04:50:06 Received message from Master: op=Shutter serial=76504 04:50:06 Shutter LASER open 04:50:06 Received message from Camera: op=State serial=76506 04:50:06 GetSingleValue result=40 Value=cccccccc 04:50:06 SkyScan query 04:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:50:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:07 Parameters OK 04:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:07 Set A/D data flow result=40 04:50:07 Set A/D channel type result=40 04:50:07 Set A/D encoding result=40 04:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:07 Set channel filter=0.000000e+000 result=40 04:50:07 Config A/D Result=40 04:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:07 Get A/D filter: -9.255963e+061 result=40 04:50:07 Get A/D value=-858993460 result=40 04:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:07 Parameters OK 04:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:07 Set A/D data flow result=40 04:50:07 Set A/D channel type result=40 04:50:07 Set A/D encoding result=40 04:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:07 Set channel filter=0.000000e+000 result=40 04:50:07 Config A/D Result=40 04:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:07 Get A/D filter: -9.255963e+061 result=40 04:50:07 Get A/D value=-858993460 result=40 04:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:07 Aux= 04:50:07 Message to Camera, serial 76506 queued 04:50:15 Received message from Master: op=Shutter serial=76516 04:50:15 Shutter LASER close 04:50:16 Received message from Master: op=PointingHead serial=76520 04:50:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:50:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:50:16 Point started: ret=0 04:50:16 point_skyscan result=0 04:50:17 Check angles 04:50:17 SkyScan query 04:50:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 04:50:17 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 04:50:18 Check angles 04:50:18 SkyScan query 04:50:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 04:50:18 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 04:50:18 Check angles 04:50:18 SkyScan query 04:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 04:50:19 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 04:50:19 Check angles 04:50:19 SkyScan query 04:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 04:50:20 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 04:50:20 Check angles 04:50:20 SkyScan query 04:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 04:50:20 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 04:50:21 Check angles 04:50:21 SkyScan query 04:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.25<-14550 Statuses=0008 0009 04:50:21 Msec=3750 True Az=112.995 Ze=-38.25 Az status=0008 Ze status=0009 04:50:21 Check angles 04:50:21 SkyScan query 04:50:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.31<-13154 Statuses=0008 0009 04:50:22 Msec=4500 True Az=112.995 Ze=-17.31 Az status=0008 Ze status=0009 04:50:22 Check angles 04:50:22 SkyScan query 04:50:23 SkyScan query done: ret=0 az=112.995<-7533 ze=3.66<-11756 Statuses=0008 0009 04:50:23 Msec=5250 True Az=112.995 Ze=3.66 Az status=0008 Ze status=0009 04:50:23 Check angles 04:50:23 SkyScan query 04:50:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:50:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:50:23 Message to Master queued w/err=0: serial=76520 error=0 04:50:28 Received message from Master: op=Filter serial=76521 04:50:28 Color wheel filter change from 0 to 0 04:50:28 FLIGetFilterPos err=0 currentPosition=0 04:50:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:28 Filter is already there-color wheel unchanged 04:50:29 Received message from Master: op=Shutter serial=76522 04:50:29 Shutter LASER close 04:50:29 Received message from Camera: op=State serial=76524 04:50:29 GetSingleValue result=40 Value=cccccccc 04:50:29 SkyScan query 04:50:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:50:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:29 Parameters OK 04:50:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:29 Set A/D data flow result=40 04:50:29 Set A/D channel type result=40 04:50:29 Set A/D encoding result=40 04:50:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:29 Set channel filter=0.000000e+000 result=40 04:50:29 Config A/D Result=40 04:50:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:29 Get A/D filter: -9.255963e+061 result=40 04:50:29 Get A/D value=-858993460 result=40 04:50:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:29 Parameters OK 04:50:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:29 Set A/D data flow result=40 04:50:29 Set A/D channel type result=40 04:50:29 Set A/D encoding result=40 04:50:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:29 Set channel filter=0.000000e+000 result=40 04:50:29 Config A/D Result=40 04:50:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:29 Get A/D filter: -9.255963e+061 result=40 04:50:29 Get A/D value=-858993460 result=40 04:50:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:29 Aux= 04:50:29 Message to Camera, serial 76524 queued 04:51:06 Received message from Master: op=PointingHead serial=76537 04:51:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:51:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:51:07 Point started: ret=0 04:51:07 point_skyscan result=0 04:51:07 Check angles 04:51:07 SkyScan query 04:51:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:51:08 Message to Master queued w/err=0: serial=76537 error=0 04:51:13 Received message from Master: op=Filter serial=76538 04:51:13 Color wheel filter change from 0 to 0 04:51:13 FLIGetFilterPos err=0 currentPosition=0 04:51:13 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:13 Filter is already there-color wheel unchanged 04:51:13 Received message from Master: op=Shutter serial=76539 04:51:13 Shutter LASER close 04:51:13 Received message from Camera: op=State serial=76541 04:51:13 GetSingleValue result=40 Value=cccccccc 04:51:13 SkyScan query 04:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:14 Parameters OK 04:51:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:14 Set A/D data flow result=40 04:51:14 Set A/D channel type result=40 04:51:14 Set A/D encoding result=40 04:51:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:14 Set channel filter=0.000000e+000 result=40 04:51:14 Config A/D Result=40 04:51:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:14 Get A/D filter: -9.255963e+061 result=40 04:51:14 Get A/D value=-858993460 result=40 04:51:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:14 Parameters OK 04:51:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:14 Set A/D data flow result=40 04:51:14 Set A/D channel type result=40 04:51:14 Set A/D encoding result=40 04:51:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:14 Set channel filter=0.000000e+000 result=40 04:51:14 Config A/D Result=40 04:51:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:14 Get A/D filter: -9.255963e+061 result=40 04:51:14 Get A/D value=-858993460 result=40 04:51:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:14 Aux= 04:51:14 Message to Camera, serial 76541 queued 04:51:50 Received message from Master: op=PointingHead serial=76553 04:51:50 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:51:50 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:51:50 Point started: ret=0 04:51:50 point_skyscan result=0 04:51:51 Check angles 04:51:51 SkyScan query 04:51:51 SkyScan query done: ret=0 az=135.825<-9055 ze=-6.51<-12434 Statuses=0009 0008 04:51:51 Msec=0 True Az=135.825 Ze=-6.51 Az status=0009 Ze status=0008 04:51:51 Check angles 04:51:51 SkyScan query 04:51:52 SkyScan query done: ret=0 az=153.33<-10222 ze=-6.495<-12433 Statuses=0009 0008 04:51:52 Msec=750 True Az=153.33 Ze=-6.495 Az status=0009 Ze status=0008 04:51:52 Check angles 04:51:52 SkyScan query 04:51:53 SkyScan query done: ret=0 az=170.76<-11384 ze=-6.495<-12433 Statuses=0009 0008 04:51:53 Msec=1500 True Az=170.76 Ze=-6.495 Az status=0009 Ze status=0008 04:51:53 Check angles 04:51:53 SkyScan query 04:51:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:51:53 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:51:53 Message to Master queued w/err=0: serial=76553 error=0 04:51:58 Received message from Master: op=Filter serial=76554 04:51:58 Color wheel filter change from 0 to 0 04:51:58 FLIGetFilterPos err=0 currentPosition=0 04:51:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:58 Filter is already there-color wheel unchanged 04:51:59 Received message from Master: op=Shutter serial=76555 04:51:59 Shutter LASER close 04:51:59 Received message from Camera: op=State serial=76557 04:51:59 GetSingleValue result=40 Value=cccccccc 04:51:59 SkyScan query 04:51:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:51:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:59 Parameters OK 04:51:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:59 Set A/D data flow result=40 04:51:59 Set A/D channel type result=40 04:51:59 Set A/D encoding result=40 04:51:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:59 Set channel filter=0.000000e+000 result=40 04:51:59 Config A/D Result=40 04:51:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:59 Get A/D filter: -9.255963e+061 result=40 04:51:59 Get A/D value=-858993460 result=40 04:51:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:59 Parameters OK 04:51:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:59 Set A/D data flow result=40 04:51:59 Set A/D channel type result=40 04:51:59 Set A/D encoding result=40 04:51:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:59 Set channel filter=0.000000e+000 result=40 04:51:59 Config A/D Result=40 04:51:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:59 Get A/D filter: -9.255963e+061 result=40 04:51:59 Get A/D value=-858993460 result=40 04:51:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:59 Aux= 04:51:59 Message to Camera, serial 76557 queued 04:52:36 Received message from Master: op=PointingHead serial=76570 04:52:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:52:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:52:36 Point started: ret=0 04:52:36 point_skyscan result=0 04:52:37 Check angles 04:52:37 SkyScan query 04:52:38 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 04:52:38 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 04:52:38 Check angles 04:52:38 SkyScan query 04:52:38 SkyScan query done: ret=0 az=135.12<-9008 ze=6.495<-11567 Statuses=0009 0008 04:52:38 Msec=750 True Az=135.12 Ze=6.495 Az status=0009 Ze status=0008 04:52:39 Check angles 04:52:39 SkyScan query 04:52:39 SkyScan query done: ret=0 az=117.645<-7843 ze=6.495<-11567 Statuses=0009 0008 04:52:39 Msec=1500 True Az=117.645 Ze=6.495 Az status=0009 Ze status=0008 04:52:39 Check angles 04:52:39 SkyScan query 04:52:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:52:40 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:52:40 Message to Master queued w/err=0: serial=76570 error=0 04:52:45 Received message from Master: op=Filter serial=76571 04:52:45 Color wheel filter change from 0 to 0 04:52:45 FLIGetFilterPos err=0 currentPosition=0 04:52:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:52:45 Filter is already there-color wheel unchanged 04:52:45 Received message from Master: op=Shutter serial=76572 04:52:45 Shutter LASER close 04:52:45 Received message from Camera: op=State serial=76574 04:52:45 GetSingleValue result=40 Value=cccccccc 04:52:45 SkyScan query 04:52:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:52:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:46 Parameters OK 04:52:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:46 Set A/D data flow result=40 04:52:46 Set A/D channel type result=40 04:52:46 Set A/D encoding result=40 04:52:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:46 Set channel filter=0.000000e+000 result=40 04:52:46 Config A/D Result=40 04:52:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:46 Get A/D filter: -9.255963e+061 result=40 04:52:46 Get A/D value=-858993460 result=40 04:52:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:46 Parameters OK 04:52:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:46 Set A/D data flow result=40 04:52:46 Set A/D channel type result=40 04:52:46 Set A/D encoding result=40 04:52:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:46 Set channel filter=0.000000e+000 result=40 04:52:46 Config A/D Result=40 04:52:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:46 Get A/D filter: -9.255963e+061 result=40 04:52:46 Get A/D value=-858993460 result=40 04:52:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:52:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:52:46 Aux= 04:52:46 Message to Camera, serial 76574 queued 04:53:23 Received message from Master: op=PointingHead serial=76587 04:53:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:53:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:53:23 Point started: ret=0 04:53:23 point_skyscan result=0 04:53:24 Check angles 04:53:24 SkyScan query 04:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 04:53:24 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 04:53:25 Check angles 04:53:25 SkyScan query 04:53:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.105<-15007 Statuses=0008 0009 04:53:25 Msec=750 True Az=112.995 Ze=-45.105 Az status=0008 Ze status=0009 04:53:25 Check angles 04:53:25 SkyScan query 04:53:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.06<-16404 Statuses=0008 0009 04:53:26 Msec=1500 True Az=112.995 Ze=-66.06 Az status=0008 Ze status=0009 04:53:26 Check angles 04:53:26 SkyScan query 04:53:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.435<-17829 Statuses=0008 0009 04:53:27 Msec=2250 True Az=112.995 Ze=-87.435 Az status=0008 Ze status=0009 04:53:27 Check angles 04:53:27 SkyScan query 04:53:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.81<-19254 Statuses=0008 0009 04:53:27 Msec=3000 True Az=112.995 Ze=-108.81 Az status=0008 Ze status=0009 04:53:28 Check angles 04:53:28 SkyScan query 04:53:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-130.215<-20681 Statuses=0008 0009 04:53:28 Msec=3750 True Az=112.995 Ze=-130.215 Az status=0008 Ze status=0009 04:53:28 Check angles 04:53:28 SkyScan query 04:53:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.155<-22077 Statuses=0008 0009 04:53:29 Msec=4500 True Az=112.995 Ze=-151.155 Az status=0008 Ze status=0009 04:53:29 Check angles 04:53:29 SkyScan query 04:53:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.72<-23448 Statuses=0008 0009 04:53:30 Msec=5250 True Az=112.995 Ze=-171.72 Az status=0008 Ze status=0009 04:53:30 Check angles 04:53:30 SkyScan query 04:53:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:53:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:53:30 Message to Master queued w/err=0: serial=76587 error=0 04:53:35 Received message from Master: op=Filter serial=76588 04:53:35 Color wheel filter change from 0 to 0 04:53:35 FLIGetFilterPos err=0 currentPosition=0 04:53:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:35 Filter is already there-color wheel unchanged 04:53:36 Received message from Master: op=Shutter serial=76589 04:53:36 Shutter LASER open 04:53:36 Received message from Camera: op=State serial=76591 04:53:36 GetSingleValue result=40 Value=cccccccc 04:53:36 SkyScan query 04:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:53:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:36 Parameters OK 04:53:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:36 Set A/D data flow result=40 04:53:36 Set A/D channel type result=40 04:53:36 Set A/D encoding result=40 04:53:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:36 Set channel filter=0.000000e+000 result=40 04:53:36 Config A/D Result=40 04:53:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:36 Get A/D filter: -9.255963e+061 result=40 04:53:36 Get A/D value=-858993460 result=40 04:53:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:36 Parameters OK 04:53:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:36 Set A/D data flow result=40 04:53:36 Set A/D channel type result=40 04:53:36 Set A/D encoding result=40 04:53:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:36 Set channel filter=0.000000e+000 result=40 04:53:36 Config A/D Result=40 04:53:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:36 Get A/D filter: -9.255963e+061 result=40 04:53:36 Get A/D value=-858993460 result=40 04:53:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:36 Aux= 04:53:36 Message to Camera, serial 76591 queued 04:53:45 Received message from Master: op=Shutter serial=76601 04:53:45 Shutter LASER close 04:53:45 Received message from Master: op=PointingHead serial=76605 04:53:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:53:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:53:46 Point started: ret=0 04:53:46 point_skyscan result=0 04:53:46 Check angles 04:53:46 SkyScan query 04:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 04:53:47 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 04:53:47 Check angles 04:53:47 SkyScan query 04:53:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 04:53:48 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 04:53:48 Check angles 04:53:48 SkyScan query 04:53:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 04:53:48 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 04:53:49 Check angles 04:53:49 SkyScan query 04:53:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.995<-17333 Statuses=0008 0009 04:53:49 Msec=2250 True Az=112.995 Ze=-79.995 Az status=0008 Ze status=0009 04:53:49 Check angles 04:53:49 SkyScan query 04:53:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 04:53:50 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 04:53:50 Check angles 04:53:50 SkyScan query 04:53:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.2<-14480 Statuses=0008 0009 04:53:51 Msec=3750 True Az=112.995 Ze=-37.2 Az status=0008 Ze status=0009 04:53:51 Check angles 04:53:51 SkyScan query 04:53:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.23<-13082 Statuses=0008 0009 04:53:51 Msec=4500 True Az=112.995 Ze=-16.23 Az status=0008 Ze status=0009 04:53:52 Check angles 04:53:52 SkyScan query 04:53:52 SkyScan query done: ret=0 az=112.995<-7533 ze=4.59<-11694 Statuses=0008 0009 04:53:52 Msec=5250 True Az=112.995 Ze=4.59 Az status=0008 Ze status=0009 04:53:52 Check angles 04:53:52 SkyScan query 04:53:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:53:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:53:53 Message to Master queued w/err=0: serial=76605 error=0 04:53:58 Received message from Master: op=Filter serial=76606 04:53:58 Color wheel filter change from 0 to 0 04:53:58 FLIGetFilterPos err=0 currentPosition=0 04:53:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:58 Filter is already there-color wheel unchanged 04:53:58 Received message from Master: op=Shutter serial=76607 04:53:58 Shutter LASER close 04:53:58 Received message from Camera: op=State serial=76609 04:53:58 GetSingleValue result=40 Value=cccccccc 04:53:58 SkyScan query 04:53:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:53:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:59 Parameters OK 04:53:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:59 Set A/D data flow result=40 04:53:59 Set A/D channel type result=40 04:53:59 Set A/D encoding result=40 04:53:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:59 Set channel filter=0.000000e+000 result=40 04:53:59 Config A/D Result=40 04:53:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:59 Get A/D filter: -9.255963e+061 result=40 04:53:59 Get A/D value=-858993460 result=40 04:53:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:59 Parameters OK 04:53:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:59 Set A/D data flow result=40 04:53:59 Set A/D channel type result=40 [UTC 2019-3-3 04:53:59] 04:53:59 Set A/D encoding result=40 04:53:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:59 Set channel filter=0.000000e+000 result=40 04:53:59 Config A/D Result=40 04:53:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:59 Get A/D filter: -9.255963e+061 result=40 04:53:59 Get A/D value=-858993460 result=40 04:53:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:59 Aux= 04:53:59 Message to Camera, serial 76609 queued 04:54:36 Received message from Master: op=PointingHead serial=76622 04:54:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:54:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:54:36 Point started: ret=0 04:54:36 point_skyscan result=0 04:54:37 Check angles 04:54:37 SkyScan query 04:54:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:54:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:54:37 Message to Master queued w/err=0: serial=76622 error=0 04:54:42 Received message from Master: op=Filter serial=76623 04:54:42 Color wheel filter change from 0 to 0 04:54:42 FLIGetFilterPos err=0 currentPosition=0 04:54:42 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:42 Filter is already there-color wheel unchanged 04:54:42 Received message from Master: op=Shutter serial=76624 04:54:42 Shutter LASER close 04:54:43 Received message from Camera: op=State serial=76626 04:54:43 GetSingleValue result=40 Value=cccccccc 04:54:43 SkyScan query 04:54:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:54:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:43 Parameters OK 04:54:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:43 Set A/D data flow result=40 04:54:43 Set A/D channel type result=40 04:54:43 Set A/D encoding result=40 04:54:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:43 Set channel filter=0.000000e+000 result=40 04:54:43 Config A/D Result=40 04:54:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:43 Get A/D filter: -9.255963e+061 result=40 04:54:43 Get A/D value=-858993460 result=40 04:54:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:43 Parameters OK 04:54:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:43 Set A/D data flow result=40 04:54:43 Set A/D channel type result=40 04:54:43 Set A/D encoding result=40 04:54:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:43 Set channel filter=0.000000e+000 result=40 04:54:43 Config A/D Result=40 04:54:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:43 Get A/D filter: -9.255963e+061 result=40 04:54:43 Get A/D value=-858993460 result=40 04:54:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:43 Aux= 04:54:43 Message to Camera, serial 76626 queued 04:55:20 Received message from Master: op=PointingHead serial=76639 04:55:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:55:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:55:20 Point started: ret=0 04:55:20 point_skyscan result=0 04:55:21 Check angles 04:55:21 SkyScan query 04:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:55:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:55:22 Message to Master queued w/err=0: serial=76639 error=0 04:55:27 Received message from Master: op=Filter serial=76640 04:55:27 Color wheel filter change from 0 to 0 04:55:27 FLIGetFilterPos err=0 currentPosition=0 04:55:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:55:27 Filter is already there-color wheel unchanged 04:55:27 Received message from Master: op=Shutter serial=76641 04:55:27 Shutter LASER close 04:55:27 Received message from Camera: op=State serial=76643 04:55:27 GetSingleValue result=40 Value=cccccccc 04:55:27 SkyScan query 04:55:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:55:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:27 Parameters OK 04:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:27 Set A/D data flow result=40 04:55:27 Set A/D channel type result=40 04:55:27 Set A/D encoding result=40 04:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:27 Set channel filter=0.000000e+000 result=40 04:55:27 Config A/D Result=40 04:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:27 Get A/D filter: -9.255963e+061 result=40 04:55:27 Get A/D value=-858993460 result=40 04:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:27 Parameters OK 04:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:27 Set A/D data flow result=40 04:55:27 Set A/D channel type result=40 04:55:27 Set A/D encoding result=40 04:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:27 Set channel filter=0.000000e+000 result=40 04:55:27 Config A/D Result=40 04:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:27 Get A/D filter: -9.255963e+061 result=40 04:55:27 Get A/D value=-858993460 result=40 04:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:55:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:55:27 Aux= 04:55:27 Message to Camera, serial 76643 queued 04:56:04 Received message from Master: op=PointingHead serial=76656 04:56:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:56:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:56:05 Point started: ret=0 04:56:05 point_skyscan result=0 04:56:05 Check angles 04:56:05 SkyScan query 04:56:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:56:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:56:06 Message to Master queued w/err=0: serial=76656 error=0 04:56:11 Received message from Master: op=Filter serial=76657 04:56:11 Color wheel filter change from 0 to 0 04:56:11 FLIGetFilterPos err=0 currentPosition=0 04:56:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:11 Filter is already there-color wheel unchanged 04:56:11 Received message from Master: op=Shutter serial=76658 04:56:11 Shutter LASER close 04:56:11 Received message from Camera: op=State serial=76660 04:56:11 GetSingleValue result=40 Value=cccccccc 04:56:11 SkyScan query 04:56:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:56:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:12 Parameters OK 04:56:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:12 Set A/D data flow result=40 04:56:12 Set A/D channel type result=40 04:56:12 Set A/D encoding result=40 04:56:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:12 Set channel filter=0.000000e+000 result=40 04:56:12 Config A/D Result=40 04:56:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:12 Get A/D filter: -9.255963e+061 result=40 04:56:12 Get A/D value=-858993460 result=40 04:56:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:12 Parameters OK 04:56:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:12 Set A/D data flow result=40 04:56:12 Set A/D channel type result=40 04:56:12 Set A/D encoding result=40 04:56:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:12 Set channel filter=0.000000e+000 result=40 04:56:12 Config A/D Result=40 04:56:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:12 Get A/D filter: -9.255963e+061 result=40 04:56:12 Get A/D value=-858993460 result=40 04:56:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:12 Aux= 04:56:12 Message to Camera, serial 76660 queued 04:56:49 Received message from Master: op=PointingHead serial=76673 04:56:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:56:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:56:49 Point started: ret=0 04:56:49 point_skyscan result=0 04:56:50 Check angles 04:56:50 SkyScan query 04:56:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 04:56:50 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 04:56:50 Check angles 04:56:50 SkyScan query 04:56:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 04:56:51 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 04:56:51 Check angles 04:56:51 SkyScan query 04:56:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 04:56:52 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 04:56:52 Check angles 04:56:52 SkyScan query 04:56:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.98<-17732 Statuses=0008 0009 04:56:52 Msec=2250 True Az=112.995 Ze=-85.98 Az status=0008 Ze status=0009 04:56:53 Check angles 04:56:53 SkyScan query 04:56:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.905<-19127 Statuses=0008 0009 04:56:53 Msec=3000 True Az=112.995 Ze=-106.905 Az status=0008 Ze status=0009 04:56:53 Check angles 04:56:53 SkyScan query 04:56:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.875<-20525 Statuses=0008 0009 04:56:54 Msec=3750 True Az=112.995 Ze=-127.875 Az status=0008 Ze status=0009 04:56:54 Check angles 04:56:54 SkyScan query 04:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.83<-21922 Statuses=0008 0009 04:56:55 Msec=4500 True Az=112.995 Ze=-148.83 Az status=0008 Ze status=0009 04:56:55 Check angles 04:56:55 SkyScan query 04:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.77<-23318 Statuses=0008 0009 04:56:55 Msec=5250 True Az=112.995 Ze=-169.77 Az status=0008 Ze status=0009 04:56:56 Check angles 04:56:56 SkyScan query 04:56:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:56:56 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:56:56 Message to Master queued w/err=0: serial=76673 error=0 04:57:01 Received message from Master: op=Filter serial=76674 04:57:01 Color wheel filter change from 0 to 0 04:57:01 FLIGetFilterPos err=0 currentPosition=0 04:57:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:01 Filter is already there-color wheel unchanged 04:57:01 Received message from Master: op=Shutter serial=76675 04:57:01 Shutter LASER open 04:57:02 Received message from Camera: op=State serial=76677 04:57:02 GetSingleValue result=40 Value=cccccccc 04:57:02 SkyScan query 04:57:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:57:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:02 Parameters OK 04:57:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:02 Set A/D data flow result=40 04:57:02 Set A/D channel type result=40 04:57:02 Set A/D encoding result=40 04:57:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:02 Set channel filter=0.000000e+000 result=40 04:57:02 Config A/D Result=40 04:57:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:02 Get A/D filter: -9.255963e+061 result=40 04:57:02 Get A/D value=-858993460 result=40 04:57:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:02 Parameters OK 04:57:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:02 Set A/D data flow result=40 04:57:02 Set A/D channel type result=40 04:57:02 Set A/D encoding result=40 04:57:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:02 Set channel filter=0.000000e+000 result=40 04:57:02 Config A/D Result=40 04:57:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:02 Get A/D filter: -9.255963e+061 result=40 04:57:02 Get A/D value=-858993460 result=40 04:57:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:02 Aux= 04:57:02 Message to Camera, serial 76677 queued 04:57:11 Received message from Master: op=Shutter serial=76687 04:57:11 Shutter LASER close 04:57:11 Received message from Master: op=PointingHead serial=76691 04:57:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:57:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:57:12 Point started: ret=0 04:57:12 point_skyscan result=0 04:57:12 Check angles 04:57:12 SkyScan query 04:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.535<-21569 Statuses=0008 0009 04:57:13 Msec=0 True Az=112.995 Ze=-143.535 Az status=0008 Ze status=0009 04:57:13 Check angles 04:57:13 SkyScan query 04:57:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 04:57:14 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 04:57:14 Check angles 04:57:14 SkyScan query 04:57:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 04:57:14 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 04:57:15 Check angles 04:57:15 SkyScan query 04:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 04:57:15 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 04:57:15 Check angles 04:57:15 SkyScan query 04:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.845<-15923 Statuses=0008 0009 04:57:16 Msec=3000 True Az=112.995 Ze=-58.845 Az status=0008 Ze status=0009 04:57:16 Check angles 04:57:16 SkyScan query 04:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 04:57:17 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 04:57:17 Check angles 04:57:17 SkyScan query 04:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 04:57:17 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 04:57:18 Check angles 04:57:18 SkyScan query 04:57:18 SkyScan query done: ret=0 az=112.995<-7533 ze=4.38<-11708 Statuses=0008 0009 04:57:18 Msec=5250 True Az=112.995 Ze=4.38 Az status=0008 Ze status=0009 04:57:18 Check angles 04:57:18 SkyScan query 04:57:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:57:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:57:19 Message to Master queued w/err=0: serial=76691 error=0 04:57:24 Received message from Master: op=Filter serial=76692 04:57:24 Color wheel filter change from 0 to 0 04:57:24 FLIGetFilterPos err=0 currentPosition=0 04:57:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:24 Filter is already there-color wheel unchanged 04:57:24 Received message from Master: op=Shutter serial=76693 04:57:24 Shutter LASER close 04:57:24 Received message from Camera: op=State serial=76695 04:57:24 GetSingleValue result=40 Value=cccccccc 04:57:24 SkyScan query 04:57:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:57:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:25 Parameters OK 04:57:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:25 Set A/D data flow result=40 04:57:25 Set A/D channel type result=40 04:57:25 Set A/D encoding result=40 04:57:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:25 Set channel filter=0.000000e+000 result=40 04:57:25 Config A/D Result=40 04:57:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:25 Get A/D filter: -9.255963e+061 result=40 04:57:25 Get A/D value=-858993460 result=40 04:57:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:25 Parameters OK 04:57:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:25 Set A/D data flow result=40 04:57:25 Set A/D channel type result=40 04:57:25 Set A/D encoding result=40 04:57:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:25 Set channel filter=0.000000e+000 result=40 04:57:25 Config A/D Result=40 04:57:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:25 Get A/D filter: -9.255963e+061 result=40 04:57:25 Get A/D value=-858993460 result=40 04:57:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:25 Aux= 04:57:25 Message to Camera, serial 76695 queued 04:58:02 Received message from Master: op=PointingHead serial=76708 04:58:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:58:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:58:02 Point started: ret=0 04:58:02 point_skyscan result=0 04:58:03 Check angles 04:58:03 SkyScan query 04:58:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:58:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:58:03 Message to Master queued w/err=0: serial=76708 error=0 04:58:08 Received message from Master: op=Filter serial=76709 04:58:08 Color wheel filter change from 0 to 0 04:58:08 FLIGetFilterPos err=0 currentPosition=0 04:58:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:08 Filter is already there-color wheel unchanged 04:58:09 Received message from Master: op=Shutter serial=76710 04:58:09 Shutter LASER close 04:58:09 Received message from Camera: op=State serial=76712 04:58:09 GetSingleValue result=40 Value=cccccccc 04:58:09 SkyScan query 04:58:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:58:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:09 Parameters OK 04:58:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:09 Set A/D data flow result=40 04:58:09 Set A/D channel type result=40 04:58:09 Set A/D encoding result=40 04:58:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:09 Set channel filter=0.000000e+000 result=40 04:58:09 Config A/D Result=40 04:58:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:09 Get A/D filter: -9.255963e+061 result=40 04:58:09 Get A/D value=-858993460 result=40 04:58:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:09 Parameters OK 04:58:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:09 Set A/D data flow result=40 04:58:09 Set A/D channel type result=40 04:58:09 Set A/D encoding result=40 04:58:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:09 Set channel filter=0.000000e+000 result=40 04:58:09 Config A/D Result=40 04:58:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:09 Get A/D filter: -9.255963e+061 result=40 04:58:09 Get A/D value=-858993460 result=40 04:58:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:09 Aux= 04:58:09 Message to Camera, serial 76712 queued 04:58:46 Received message from Master: op=PointingHead serial=76725 04:58:46 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:58:46 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:58:46 Point started: ret=0 04:58:46 point_skyscan result=0 04:58:47 Check angles 04:58:47 SkyScan query 04:58:48 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.495<-12433 Statuses=0009 0008 04:58:48 Msec=0 True Az=135.9 Ze=-6.495 Az status=0009 Ze status=0008 04:58:48 Check angles 04:58:48 SkyScan query 04:58:48 SkyScan query done: ret=0 az=153.405<-10227 ze=-6.495<-12433 Statuses=0009 0008 04:58:48 Msec=750 True Az=153.405 Ze=-6.495 Az status=0009 Ze status=0008 04:58:49 Check angles 04:58:49 SkyScan query 04:58:49 SkyScan query done: ret=0 az=170.835<-11389 ze=-6.48<-12432 Statuses=0009 0008 04:58:49 Msec=1500 True Az=170.835 Ze=-6.48 Az status=0009 Ze status=0008 04:58:49 Check angles 04:58:49 SkyScan query 04:58:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:58:50 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 04:58:50 Message to Master queued w/err=0: serial=76725 error=0 04:58:55 Received message from Master: op=Filter serial=76726 04:58:55 Color wheel filter change from 0 to 0 04:58:55 FLIGetFilterPos err=0 currentPosition=0 04:58:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:55 Filter is already there-color wheel unchanged 04:58:55 Received message from Master: op=Shutter serial=76727 04:58:55 Shutter LASER close 04:58:55 Received message from Camera: op=State serial=76729 04:58:55 GetSingleValue result=40 Value=cccccccc 04:58:55 SkyScan query 04:58:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:58:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:56 Parameters OK 04:58:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:56 Set A/D data flow result=40 04:58:56 Set A/D channel type result=40 04:58:56 Set A/D encoding result=40 04:58:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:56 Set channel filter=0.000000e+000 result=40 04:58:56 Config A/D Result=40 04:58:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:56 Get A/D filter: -9.255963e+061 result=40 04:58:56 Get A/D value=-858993460 result=40 04:58:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:56 Parameters OK 04:58:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:56 Set A/D data flow result=40 04:58:56 Set A/D channel type result=40 04:58:56 Set A/D encoding result=40 04:58:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:56 Set channel filter=0.000000e+000 result=40 04:58:56 Config A/D Result=40 04:58:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:56 Get A/D filter: -9.255963e+061 result=40 04:58:56 Get A/D value=-858993460 result=40 04:58:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:56 Aux= 04:58:56 Message to Camera, serial 76729 queued 04:59:32 Received message from Master: op=PointingHead serial=76742 04:59:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:59:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:59:33 Point started: ret=0 04:59:33 point_skyscan result=0 04:59:34 Check angles 04:59:34 SkyScan query 04:59:34 SkyScan query done: ret=0 az=152.58<-10172 ze=6.51<-11566 Statuses=0009 0008 04:59:34 Msec=0 True Az=152.58 Ze=6.51 Az status=0009 Ze status=0008 04:59:34 Check angles 04:59:34 SkyScan query 04:59:35 SkyScan query done: ret=0 az=135.045<-9003 ze=6.495<-11567 Statuses=0009 0008 04:59:35 Msec=750 True Az=135.045 Ze=6.495 Az status=0009 Ze status=0008 04:59:35 Check angles 04:59:35 SkyScan query 04:59:36 SkyScan query done: ret=0 az=117.09<-7806 ze=6.495<-11567 Statuses=0009 0008 04:59:36 Msec=1500 True Az=117.09 Ze=6.495 Az status=0009 Ze status=0008 04:59:36 Check angles 04:59:36 SkyScan query 04:59:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:59:36 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:59:36 Message to Master queued w/err=0: serial=76742 error=0 04:59:41 Received message from Master: op=Filter serial=76743 04:59:41 Color wheel filter change from 0 to 0 04:59:41 FLIGetFilterPos err=0 currentPosition=0 04:59:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:41 Filter is already there-color wheel unchanged 04:59:42 Received message from Master: op=Shutter serial=76744 04:59:42 Shutter LASER close 04:59:42 Received message from Camera: op=State serial=76746 04:59:42 GetSingleValue result=40 Value=cccccccc 04:59:42 SkyScan query 04:59:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:59:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:42 Parameters OK 04:59:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:42 Set A/D data flow result=40 04:59:42 Set A/D channel type result=40 04:59:42 Set A/D encoding result=40 04:59:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:42 Set channel filter=0.000000e+000 result=40 04:59:42 Config A/D Result=40 04:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:42 Get A/D filter: -9.255963e+061 result=40 04:59:42 Get A/D value=-858993460 result=40 04:59:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:42 Parameters OK 04:59:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:42 Set A/D data flow result=40 04:59:42 Set A/D channel type result=40 04:59:42 Set A/D encoding result=40 04:59:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:42 Set channel filter=0.000000e+000 result=40 04:59:42 Config A/D Result=40 04:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:42 Get A/D filter: -9.255963e+061 result=40 04:59:42 Get A/D value=-858993460 result=40 04:59:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:42 Aux= 04:59:42 Message to Camera, serial 76746 queued 05:00:19 Received message from Master: op=PointingHead serial=76759 05:00:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:00:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:00:19 Point started: ret=0 05:00:19 point_skyscan result=0 05:00:20 Check angles 05:00:20 SkyScan query 05:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.88<-13592 Statuses=0008 0009 05:00:21 Msec=0 True Az=112.995 Ze=-23.88 Az status=0008 Ze status=0009 05:00:21 Check angles 05:00:21 SkyScan query 05:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.82<-14988 Statuses=0008 0009 05:00:21 Msec=750 True Az=112.995 Ze=-44.82 Az status=0008 Ze status=0009 05:00:22 Check angles 05:00:22 SkyScan query 05:00:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 05:00:22 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 05:00:22 Check angles 05:00:22 SkyScan query 05:00:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.135<-17809 Statuses=0008 0009 05:00:23 Msec=2250 True Az=112.995 Ze=-87.135 Az status=0008 Ze status=0009 05:00:23 Check angles 05:00:23 SkyScan query 05:00:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.525<-19235 Statuses=0008 0009 05:00:24 Msec=3000 True Az=112.995 Ze=-108.525 Az status=0008 Ze status=0009 05:00:24 Check angles 05:00:24 SkyScan query 05:00:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.48<-20632 Statuses=0008 0009 05:00:25 Msec=3750 True Az=112.995 Ze=-129.48 Az status=0008 Ze status=0009 05:00:25 Check angles 05:00:25 SkyScan query 05:00:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.435<-22029 Statuses=0008 0009 05:00:25 Msec=4500 True Az=112.995 Ze=-150.435 Az status=0008 Ze status=0009 05:00:25 Check angles 05:00:25 SkyScan query 05:00:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 05:00:26 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 05:00:26 Check angles 05:00:26 SkyScan query 05:00:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:00:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:00:27 Message to Master queued w/err=0: serial=76759 error=0 05:00:32 Received message from Master: op=Filter serial=76760 05:00:32 Color wheel filter change from 0 to 0 05:00:32 FLIGetFilterPos err=0 currentPosition=0 05:00:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:32 Filter is already there-color wheel unchanged 05:00:32 Received message from Master: op=Shutter serial=76761 05:00:32 Shutter LASER open 05:00:32 Received message from Camera: op=State serial=76763 05:00:32 GetSingleValue result=40 Value=cccccccc 05:00:32 SkyScan query 05:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:00:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:33 Parameters OK 05:00:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:33 Set A/D data flow result=40 05:00:33 Set A/D channel type result=40 05:00:33 Set A/D encoding result=40 05:00:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:33 Set channel filter=0.000000e+000 result=40 05:00:33 Config A/D Result=40 05:00:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:33 Get A/D filter: -9.255963e+061 result=40 05:00:33 Get A/D value=-858993460 result=40 05:00:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:33 Parameters OK 05:00:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:33 Set A/D data flow result=40 05:00:33 Set A/D channel type result=40 05:00:33 Set A/D encoding result=40 05:00:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:33 Set channel filter=0.000000e+000 result=40 05:00:33 Config A/D Result=40 05:00:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:33 Get A/D filter: -9.255963e+061 result=40 05:00:33 Get A/D value=-858993460 result=40 05:00:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:33 Aux= 05:00:33 Message to Camera, serial 76763 queued 05:00:41 Received message from Master: op=Shutter serial=76773 05:00:41 Shutter LASER close 05:00:42 Received message from Master: op=PointingHead serial=76777 05:00:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:00:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:00:42 Point started: ret=0 05:00:42 point_skyscan result=0 05:00:43 Check angles 05:00:43 SkyScan query 05:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 05:00:43 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 05:00:43 Check angles 05:00:43 SkyScan query 05:00:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.35<-20090 Statuses=0008 0009 05:00:44 Msec=750 True Az=112.995 Ze=-121.35 Az status=0008 Ze status=0009 05:00:44 Check angles 05:00:44 SkyScan query 05:00:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.38<-18692 Statuses=0008 0009 05:00:45 Msec=1500 True Az=112.995 Ze=-100.38 Az status=0008 Ze status=0009 05:00:45 Check angles 05:00:45 SkyScan query 05:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 05:00:46 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 05:00:46 Check angles 05:00:46 SkyScan query 05:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 05:00:46 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 05:00:46 Check angles 05:00:46 SkyScan query 05:00:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.53<-14502 Statuses=0008 0009 05:00:47 Msec=3750 True Az=112.995 Ze=-37.53 Az status=0008 Ze status=0009 05:00:47 Check angles 05:00:47 SkyScan query 05:00:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 05:00:48 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 05:00:48 Check angles 05:00:48 SkyScan query 05:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=4.335<-11711 Statuses=0008 0009 05:00:49 Msec=5250 True Az=112.995 Ze=4.335 Az status=0008 Ze status=0009 05:00:49 Check angles 05:00:49 SkyScan query 05:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:00:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:00:49 Message to Master queued w/err=0: serial=76777 error=0 05:00:54 Received message from Master: op=Filter serial=76778 05:00:54 Color wheel filter change from 0 to 0 05:00:54 FLIGetFilterPos err=0 currentPosition=0 05:00:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:54 Filter is already there-color wheel unchanged 05:00:54 Received message from Master: op=Shutter serial=76779 05:00:54 Shutter LASER close 05:00:55 Received message from Camera: op=State serial=76781 05:00:55 GetSingleValue result=40 Value=cccccccc 05:00:55 SkyScan query 05:00:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:00:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:55 Parameters OK 05:00:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:55 Set A/D data flow result=40 05:00:55 Set A/D channel type result=40 05:00:55 Set A/D encoding result=40 05:00:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:55 Set channel filter=0.000000e+000 result=40 05:00:55 Config A/D Result=40 05:00:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:55 Get A/D filter: -9.255963e+061 result=40 05:00:55 Get A/D value=-858993460 result=40 05:00:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:55 Parameters OK 05:00:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:55 Set A/D data flow result=40 05:00:55 Set A/D channel type result=40 05:00:55 Set A/D encoding result=40 05:00:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:55 Set channel filter=0.000000e+000 result=40 05:00:55 Config A/D Result=40 05:00:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:55 Get A/D filter: -9.255963e+061 result=40 05:00:55 Get A/D value=-858993460 result=40 05:00:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:55 Aux= 05:00:55 Message to Camera, serial 76781 queued 05:01:32 Received message from Master: op=PointingHead serial=76794 05:01:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:01:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:01:32 Point started: ret=0 05:01:32 point_skyscan result=0 05:01:33 Check angles 05:01:33 SkyScan query 05:01:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:01:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:01:34 Message to Master queued w/err=0: serial=76794 error=0 05:01:39 Received message from Master: op=Filter serial=76795 05:01:39 Color wheel filter change from 0 to 0 05:01:39 FLIGetFilterPos err=0 currentPosition=0 05:01:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:39 Filter is already there-color wheel unchanged 05:01:39 Received message from Master: op=Shutter serial=76796 05:01:39 Shutter LASER close 05:01:39 Received message from Camera: op=State serial=76798 05:01:39 GetSingleValue result=40 Value=cccccccc 05:01:39 SkyScan query 05:01:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:01:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:39 Parameters OK 05:01:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:39 Set A/D data flow result=40 05:01:39 Set A/D channel type result=40 05:01:39 Set A/D encoding result=40 05:01:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:39 Set channel filter=0.000000e+000 result=40 05:01:39 Config A/D Result=40 05:01:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:39 Get A/D filter: -9.255963e+061 result=40 05:01:39 Get A/D value=-858993460 result=40 05:01:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:39 Parameters OK 05:01:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:39 Set A/D data flow result=40 05:01:39 Set A/D channel type result=40 05:01:39 Set A/D encoding result=40 05:01:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:39 Set channel filter=0.000000e+000 result=40 05:01:39 Config A/D Result=40 05:01:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:39 Get A/D filter: -9.255963e+061 result=40 05:01:39 Get A/D value=-858993460 result=40 05:01:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:39 Aux= 05:01:39 Message to Camera, serial 76798 queued 05:02:15 Received message from Master: op=PointingHead serial=76810 05:02:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:02:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:02:16 Point started: ret=0 05:02:16 point_skyscan result=0 05:02:17 Check angles 05:02:17 SkyScan query 05:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:02:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:02:17 Message to Master queued w/err=0: serial=76810 error=0 05:02:22 Received message from Master: op=Filter serial=76811 05:02:22 Color wheel filter change from 0 to 0 05:02:22 FLIGetFilterPos err=0 currentPosition=0 05:02:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:02:22 Filter is already there-color wheel unchanged 05:02:22 Received message from Master: op=Shutter serial=76812 05:02:22 Shutter LASER close 05:02:22 Received message from Camera: op=State serial=76814 05:02:22 GetSingleValue result=40 Value=cccccccc 05:02:22 SkyScan query 05:02:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:02:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:23 Parameters OK 05:02:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:23 Set A/D data flow result=40 05:02:23 Set A/D channel type result=40 05:02:23 Set A/D encoding result=40 05:02:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:23 Set channel filter=0.000000e+000 result=40 05:02:23 Config A/D Result=40 05:02:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:23 Get A/D filter: -9.255963e+061 result=40 05:02:23 Get A/D value=-858993460 result=40 05:02:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:23 Parameters OK 05:02:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:23 Set A/D data flow result=40 05:02:23 Set A/D channel type result=40 05:02:23 Set A/D encoding result=40 05:02:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:23 Set channel filter=0.000000e+000 result=40 05:02:23 Config A/D Result=40 05:02:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:23 Get A/D filter: -9.255963e+061 result=40 05:02:23 Get A/D value=-858993460 result=40 05:02:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:02:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:02:23 Aux= 05:02:23 Message to Camera, serial 76814 queued 05:03:00 Received message from Master: op=PointingHead serial=76827 05:03:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:03:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:03:00 Point started: ret=0 05:03:00 point_skyscan result=0 05:03:01 Check angles 05:03:01 SkyScan query 05:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:03:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:03:01 Message to Master queued w/err=0: serial=76827 error=0 05:03:06 Received message from Master: op=Filter serial=76828 05:03:06 Color wheel filter change from 0 to 0 05:03:06 FLIGetFilterPos err=0 currentPosition=0 05:03:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:06 Filter is already there-color wheel unchanged 05:03:07 Received message from Master: op=Shutter serial=76829 05:03:07 Shutter LASER close 05:03:07 Received message from Camera: op=State serial=76831 05:03:07 GetSingleValue result=40 Value=cccccccc 05:03:07 SkyScan query 05:03:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:03:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:07 Parameters OK 05:03:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:07 Set A/D data flow result=40 05:03:07 Set A/D channel type result=40 05:03:07 Set A/D encoding result=40 05:03:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:07 Set channel filter=0.000000e+000 result=40 05:03:07 Config A/D Result=40 05:03:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:07 Get A/D filter: -9.255963e+061 result=40 05:03:07 Get A/D value=-858993460 result=40 05:03:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:07 Parameters OK 05:03:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:07 Set A/D data flow result=40 05:03:07 Set A/D channel type result=40 05:03:07 Set A/D encoding result=40 05:03:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:07 Set channel filter=0.000000e+000 result=40 05:03:07 Config A/D Result=40 05:03:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:07 Get A/D filter: -9.255963e+061 result=40 05:03:07 Get A/D value=-858993460 result=40 05:03:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:07 Aux= 05:03:07 Message to Camera, serial 76831 queued 05:03:38 Received message from Master: op=Identify serial=76835 05:03:44 Received message from Master: op=PointingHead serial=76847 05:03:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:03:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:03:44 Point started: ret=0 05:03:44 point_skyscan result=0 05:03:45 Check angles 05:03:45 SkyScan query 05:03:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 05:03:46 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 05:03:46 Check angles 05:03:46 SkyScan query 05:03:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 05:03:46 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 05:03:47 Check angles 05:03:47 SkyScan query 05:03:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 05:03:47 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 05:03:47 Check angles 05:03:47 SkyScan query 05:03:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.175<-17745 Statuses=0008 0009 05:03:48 Msec=2250 True Az=112.995 Ze=-86.175 Az status=0008 Ze status=0009 05:03:48 Check angles 05:03:48 SkyScan query 05:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.145<-19143 Statuses=0008 0009 05:03:49 Msec=3000 True Az=112.995 Ze=-107.145 Az status=0008 Ze status=0009 05:03:49 Check angles 05:03:49 SkyScan query 05:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.1<-20540 Statuses=0008 0009 05:03:49 Msec=3750 True Az=112.995 Ze=-128.1 Az status=0008 Ze status=0009 05:03:50 Check angles 05:03:50 SkyScan query 05:03:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.055<-21937 Statuses=0008 0009 05:03:50 Msec=4500 True Az=112.995 Ze=-149.055 Az status=0008 Ze status=0009 [UTC 2019-3-3 05:03:50] 05:03:50 Check angles 05:03:50 SkyScan query 05:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.01<-23334 Statuses=0008 0009 05:03:51 Msec=5250 True Az=112.995 Ze=-170.01 Az status=0008 Ze status=0009 05:03:51 Check angles 05:03:51 SkyScan query 05:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:03:52 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:03:52 Message to Master queued w/err=0: serial=76847 error=0 05:03:57 Received message from Master: op=Filter serial=76848 05:03:57 Color wheel filter change from 0 to 0 05:03:57 FLIGetFilterPos err=0 currentPosition=0 05:03:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:57 Filter is already there-color wheel unchanged 05:03:57 Received message from Master: op=Shutter serial=76849 05:03:57 Shutter LASER open 05:03:57 Received message from Camera: op=State serial=76851 05:03:57 GetSingleValue result=40 Value=cccccccc 05:03:57 SkyScan query 05:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:03:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:58 Parameters OK 05:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:58 Set A/D data flow result=40 05:03:58 Set A/D channel type result=40 05:03:58 Set A/D encoding result=40 05:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:58 Set channel filter=0.000000e+000 result=40 05:03:58 Config A/D Result=40 05:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:58 Get A/D filter: -9.255963e+061 result=40 05:03:58 Get A/D value=-858993460 result=40 05:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:58 Parameters OK 05:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:58 Set A/D data flow result=40 05:03:58 Set A/D channel type result=40 05:03:58 Set A/D encoding result=40 05:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:58 Set channel filter=0.000000e+000 result=40 05:03:58 Config A/D Result=40 05:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:58 Get A/D filter: -9.255963e+061 result=40 05:03:58 Get A/D value=-858993460 result=40 05:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:58 Aux= 05:03:58 Message to Camera, serial 76851 queued 05:04:06 Received message from Master: op=Shutter serial=76861 05:04:06 Shutter LASER close 05:04:07 Received message from Master: op=PointingHead serial=76865 05:04:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:04:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:04:07 Point started: ret=0 05:04:07 point_skyscan result=0 05:04:08 Check angles 05:04:08 SkyScan query 05:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 05:04:08 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 05:04:08 Check angles 05:04:08 SkyScan query 05:04:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.4<-20160 Statuses=0008 0009 05:04:09 Msec=750 True Az=112.995 Ze=-122.4 Az status=0008 Ze status=0009 05:04:09 Check angles 05:04:09 SkyScan query 05:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 05:04:10 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 05:04:10 Check angles 05:04:10 SkyScan query 05:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.475<-17365 Statuses=0008 0009 05:04:11 Msec=2250 True Az=112.995 Ze=-80.475 Az status=0008 Ze status=0009 05:04:11 Check angles 05:04:11 SkyScan query 05:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.535<-15969 Statuses=0008 0009 05:04:11 Msec=3000 True Az=112.995 Ze=-59.535 Az status=0008 Ze status=0009 05:04:11 Check angles 05:04:11 SkyScan query 05:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.565<-14571 Statuses=0008 0009 05:04:12 Msec=3750 True Az=112.995 Ze=-38.565 Az status=0008 Ze status=0009 05:04:12 Check angles 05:04:12 SkyScan query 05:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.61<-13174 Statuses=0008 0009 05:04:13 Msec=4500 True Az=112.995 Ze=-17.61 Az status=0008 Ze status=0009 05:04:13 Check angles 05:04:13 SkyScan query 05:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=3.345<-11777 Statuses=0008 0009 05:04:14 Msec=5250 True Az=112.995 Ze=3.345 Az status=0008 Ze status=0009 05:04:14 Check angles 05:04:14 SkyScan query 05:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:04:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:04:14 Message to Master queued w/err=0: serial=76865 error=0 05:04:19 Received message from Master: op=Filter serial=76866 05:04:19 Color wheel filter change from 0 to 0 05:04:19 FLIGetFilterPos err=0 currentPosition=0 05:04:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:19 Filter is already there-color wheel unchanged 05:04:19 Received message from Master: op=Shutter serial=76867 05:04:19 Shutter LASER close 05:04:20 Received message from Camera: op=State serial=76869 05:04:20 GetSingleValue result=40 Value=cccccccc 05:04:20 SkyScan query 05:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:04:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:20 Parameters OK 05:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:20 Set A/D data flow result=40 05:04:20 Set A/D channel type result=40 05:04:20 Set A/D encoding result=40 05:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:20 Set channel filter=0.000000e+000 result=40 05:04:20 Config A/D Result=40 05:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:20 Get A/D filter: -9.255963e+061 result=40 05:04:20 Get A/D value=-858993460 result=40 05:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:20 Parameters OK 05:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:20 Set A/D data flow result=40 05:04:20 Set A/D channel type result=40 05:04:20 Set A/D encoding result=40 05:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:20 Set channel filter=0.000000e+000 result=40 05:04:20 Config A/D Result=40 05:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:20 Get A/D filter: -9.255963e+061 result=40 05:04:20 Get A/D value=-858993460 result=40 05:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:20 Aux= 05:04:20 Message to Camera, serial 76869 queued 05:04:57 Received message from Master: op=PointingHead serial=76882 05:04:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:04:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:04:57 Point started: ret=0 05:04:57 point_skyscan result=0 05:04:58 Check angles 05:04:58 SkyScan query 05:04:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:04:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:04:59 Message to Master queued w/err=0: serial=76882 error=0 05:05:04 Received message from Master: op=Filter serial=76883 05:05:04 Color wheel filter change from 0 to 0 05:05:04 FLIGetFilterPos err=0 currentPosition=0 05:05:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:04 Filter is already there-color wheel unchanged 05:05:04 Received message from Master: op=Shutter serial=76884 05:05:04 Shutter LASER close 05:05:04 Received message from Camera: op=State serial=76886 05:05:04 GetSingleValue result=40 Value=cccccccc 05:05:04 SkyScan query 05:05:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:05:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:05 Parameters OK 05:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:05 Set A/D data flow result=40 05:05:05 Set A/D channel type result=40 05:05:05 Set A/D encoding result=40 05:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:05 Set channel filter=0.000000e+000 result=40 05:05:05 Config A/D Result=40 05:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:05 Get A/D filter: -9.255963e+061 result=40 05:05:05 Get A/D value=-858993460 result=40 05:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:05 Parameters OK 05:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:05 Set A/D data flow result=40 05:05:05 Set A/D channel type result=40 05:05:05 Set A/D encoding result=40 05:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:05 Set channel filter=0.000000e+000 result=40 05:05:05 Config A/D Result=40 05:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:05 Get A/D filter: -9.255963e+061 result=40 05:05:05 Get A/D value=-858993460 result=40 05:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:05 Aux= 05:05:05 Message to Camera, serial 76886 queued 05:05:41 Received message from Master: op=PointingHead serial=76899 05:05:41 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:05:41 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:05:42 Point started: ret=0 05:05:42 point_skyscan result=0 05:05:42 Check angles 05:05:42 SkyScan query 05:05:43 SkyScan query done: ret=0 az=135.75<-9050 ze=-6.51<-12434 Statuses=0009 0008 05:05:43 Msec=0 True Az=135.75 Ze=-6.51 Az status=0009 Ze status=0008 05:05:43 Check angles 05:05:43 SkyScan query 05:05:44 SkyScan query done: ret=0 az=153.315<-10221 ze=-6.495<-12433 Statuses=0009 0008 05:05:44 Msec=750 True Az=153.315 Ze=-6.495 Az status=0009 Ze status=0008 05:05:44 Check angles 05:05:44 SkyScan query 05:05:45 SkyScan query done: ret=0 az=170.715<-11381 ze=-6.495<-12433 Statuses=0009 0008 05:05:45 Msec=1500 True Az=170.715 Ze=-6.495 Az status=0009 Ze status=0008 05:05:45 Check angles 05:05:45 SkyScan query 05:05:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:05:45 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:05:45 Message to Master queued w/err=0: serial=76899 error=0 05:05:50 Received message from Master: op=Filter serial=76900 05:05:50 Color wheel filter change from 0 to 0 05:05:50 FLIGetFilterPos err=0 currentPosition=0 05:05:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:50 Filter is already there-color wheel unchanged 05:05:50 Received message from Master: op=Shutter serial=76901 05:05:50 Shutter LASER close 05:05:50 Received message from Camera: op=State serial=76903 05:05:50 GetSingleValue result=40 Value=cccccccc 05:05:50 SkyScan query 05:05:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:05:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:51 Parameters OK 05:05:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:51 Set A/D data flow result=40 05:05:51 Set A/D channel type result=40 05:05:51 Set A/D encoding result=40 05:05:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:51 Set channel filter=0.000000e+000 result=40 05:05:51 Config A/D Result=40 05:05:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:51 Get A/D filter: -9.255963e+061 result=40 05:05:51 Get A/D value=-858993460 result=40 05:05:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:51 Parameters OK 05:05:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:51 Set A/D data flow result=40 05:05:51 Set A/D channel type result=40 05:05:51 Set A/D encoding result=40 05:05:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:51 Set channel filter=0.000000e+000 result=40 05:05:51 Config A/D Result=40 05:05:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:51 Get A/D filter: -9.255963e+061 result=40 05:05:51 Get A/D value=-858993460 result=40 05:05:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:51 Aux= 05:05:51 Message to Camera, serial 76903 queued 05:06:28 Received message from Master: op=PointingHead serial=76916 05:06:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:06:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:06:28 Point started: ret=0 05:06:28 point_skyscan result=0 05:06:29 Check angles 05:06:29 SkyScan query 05:06:30 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 05:06:30 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 05:06:30 Check angles 05:06:30 SkyScan query 05:06:30 SkyScan query done: ret=0 az=135.465<-9031 ze=6.495<-11567 Statuses=0009 0008 05:06:30 Msec=750 True Az=135.465 Ze=6.495 Az status=0009 Ze status=0008 05:06:30 Check angles 05:06:30 SkyScan query 05:06:31 SkyScan query done: ret=0 az=117.99<-7866 ze=6.495<-11567 Statuses=0009 0008 05:06:31 Msec=1500 True Az=117.99 Ze=6.495 Az status=0009 Ze status=0008 05:06:31 Check angles 05:06:31 SkyScan query 05:06:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:06:32 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:06:32 Message to Master queued w/err=0: serial=76916 error=0 05:06:37 Received message from Master: op=Filter serial=76917 05:06:37 Color wheel filter change from 0 to 0 05:06:37 FLIGetFilterPos err=0 currentPosition=0 05:06:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:37 Filter is already there-color wheel unchanged 05:06:37 Received message from Master: op=Shutter serial=76918 05:06:37 Shutter LASER close 05:06:37 Received message from Camera: op=State serial=76920 05:06:37 GetSingleValue result=40 Value=cccccccc 05:06:37 SkyScan query 05:06:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:06:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:38 Parameters OK 05:06:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:38 Set A/D data flow result=40 05:06:38 Set A/D channel type result=40 05:06:38 Set A/D encoding result=40 05:06:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:38 Set channel filter=0.000000e+000 result=40 05:06:38 Config A/D Result=40 05:06:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:38 Get A/D filter: -9.255963e+061 result=40 05:06:38 Get A/D value=-858993460 result=40 05:06:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:38 Parameters OK 05:06:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:38 Set A/D data flow result=40 05:06:38 Set A/D channel type result=40 05:06:38 Set A/D encoding result=40 05:06:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:38 Set channel filter=0.000000e+000 result=40 05:06:38 Config A/D Result=40 05:06:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:38 Get A/D filter: -9.255963e+061 result=40 05:06:38 Get A/D value=-858993460 result=40 05:06:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:38 Aux= 05:06:38 Message to Camera, serial 76920 queued 05:07:15 Received message from Master: op=PointingHead serial=76933 05:07:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:07:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:07:15 Point started: ret=0 05:07:15 point_skyscan result=0 05:07:16 Check angles 05:07:16 SkyScan query 05:07:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 05:07:16 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 05:07:16 Check angles 05:07:16 SkyScan query 05:07:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 05:07:17 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 05:07:17 Check angles 05:07:17 SkyScan query 05:07:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.98<-16332 Statuses=0008 0009 05:07:18 Msec=1500 True Az=112.995 Ze=-64.98 Az status=0008 Ze status=0009 05:07:18 Check angles 05:07:18 SkyScan query 05:07:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 05:07:18 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 05:07:19 Check angles 05:07:19 SkyScan query 05:07:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 05:07:19 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 05:07:19 Check angles 05:07:19 SkyScan query 05:07:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.845<-20523 Statuses=0008 0009 05:07:20 Msec=3750 True Az=112.995 Ze=-127.845 Az status=0008 Ze status=0009 05:07:20 Check angles 05:07:20 SkyScan query 05:07:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.785<-21919 Statuses=0008 0009 05:07:21 Msec=4500 True Az=112.995 Ze=-148.785 Az status=0008 Ze status=0009 05:07:21 Check angles 05:07:21 SkyScan query 05:07:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.74<-23316 Statuses=0008 0009 05:07:21 Msec=5250 True Az=112.995 Ze=-169.74 Az status=0008 Ze status=0009 05:07:22 Check angles 05:07:22 SkyScan query 05:07:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:07:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:07:22 Message to Master queued w/err=0: serial=76933 error=0 05:07:27 Received message from Master: op=Filter serial=76934 05:07:27 Color wheel filter change from 0 to 0 05:07:27 FLIGetFilterPos err=0 currentPosition=0 05:07:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:27 Filter is already there-color wheel unchanged 05:07:27 Received message from Master: op=Shutter serial=76935 05:07:27 Shutter LASER open 05:07:28 Received message from Camera: op=State serial=76937 05:07:28 GetSingleValue result=40 Value=cccccccc 05:07:28 SkyScan query 05:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:07:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:28 Parameters OK 05:07:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:28 Set A/D data flow result=40 05:07:28 Set A/D channel type result=40 05:07:28 Set A/D encoding result=40 05:07:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:28 Set channel filter=0.000000e+000 result=40 05:07:28 Config A/D Result=40 05:07:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:28 Get A/D filter: -9.255963e+061 result=40 05:07:28 Get A/D value=-858993460 result=40 05:07:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:28 Parameters OK 05:07:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:28 Set A/D data flow result=40 05:07:28 Set A/D channel type result=40 05:07:28 Set A/D encoding result=40 05:07:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:28 Set channel filter=0.000000e+000 result=40 05:07:28 Config A/D Result=40 05:07:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:28 Get A/D filter: -9.255963e+061 result=40 05:07:28 Get A/D value=-858993460 result=40 05:07:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:28 Aux= 05:07:28 Message to Camera, serial 76937 queued 05:07:37 Received message from Master: op=Shutter serial=76947 05:07:37 Shutter LASER close 05:07:37 Received message from Master: op=PointingHead serial=76951 05:07:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:07:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:07:37 Point started: ret=0 05:07:37 point_skyscan result=0 05:07:38 Check angles 05:07:38 SkyScan query 05:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 05:07:39 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 05:07:39 Check angles 05:07:39 SkyScan query 05:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.95<-20130 Statuses=0008 0009 05:07:39 Msec=750 True Az=112.995 Ze=-121.95 Az status=0008 Ze status=0009 05:07:40 Check angles 05:07:40 SkyScan query 05:07:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 05:07:40 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 05:07:40 Check angles 05:07:40 SkyScan query 05:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.62<-17308 Statuses=0008 0009 05:07:41 Msec=2250 True Az=112.995 Ze=-79.62 Az status=0008 Ze status=0009 05:07:41 Check angles 05:07:41 SkyScan query 05:07:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.665<-15911 Statuses=0008 0009 05:07:42 Msec=3000 True Az=112.995 Ze=-58.665 Az status=0008 Ze status=0009 05:07:42 Check angles 05:07:42 SkyScan query 05:07:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 05:07:42 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 05:07:43 Check angles 05:07:43 SkyScan query 05:07:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.32<-13088 Statuses=0008 0009 05:07:43 Msec=4500 True Az=112.995 Ze=-16.32 Az status=0008 Ze status=0009 05:07:43 Check angles 05:07:43 SkyScan query 05:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=4.53<-11698 Statuses=0008 0009 05:07:44 Msec=5250 True Az=112.995 Ze=4.53 Az status=0008 Ze status=0009 05:07:44 Check angles 05:07:44 SkyScan query 05:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:07:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:07:45 Message to Master queued w/err=0: serial=76951 error=0 05:07:50 Received message from Master: op=Filter serial=76952 05:07:50 Color wheel filter change from 0 to 0 05:07:50 FLIGetFilterPos err=0 currentPosition=0 05:07:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:50 Filter is already there-color wheel unchanged 05:07:50 Received message from Master: op=Shutter serial=76953 05:07:50 Shutter LASER close 05:07:50 Received message from Camera: op=State serial=76955 05:07:50 GetSingleValue result=40 Value=cccccccc 05:07:50 SkyScan query 05:07:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:07:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:51 Parameters OK 05:07:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:51 Set A/D data flow result=40 05:07:51 Set A/D channel type result=40 05:07:51 Set A/D encoding result=40 05:07:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:51 Set channel filter=0.000000e+000 result=40 05:07:51 Config A/D Result=40 05:07:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:51 Get A/D filter: -9.255963e+061 result=40 05:07:51 Get A/D value=-858993460 result=40 05:07:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:51 Parameters OK 05:07:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:51 Set A/D data flow result=40 05:07:51 Set A/D channel type result=40 05:07:51 Set A/D encoding result=40 05:07:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:51 Set channel filter=0.000000e+000 result=40 05:07:51 Config A/D Result=40 05:07:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:51 Get A/D filter: -9.255963e+061 result=40 05:07:51 Get A/D value=-858993460 result=40 05:07:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:51 Aux= 05:07:51 Message to Camera, serial 76955 queued 05:08:27 Received message from Master: op=PointingHead serial=76968 05:08:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:08:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:08:28 Point started: ret=0 05:08:28 point_skyscan result=0 05:08:29 Check angles 05:08:29 SkyScan query 05:08:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:08:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:08:29 Message to Master queued w/err=0: serial=76968 error=0 05:08:34 Received message from Master: op=Filter serial=76969 05:08:34 Color wheel filter change from 0 to 0 05:08:34 FLIGetFilterPos err=0 currentPosition=0 05:08:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:34 Filter is already there-color wheel unchanged 05:08:34 Received message from Master: op=Shutter serial=76970 05:08:34 Shutter LASER close 05:08:34 Received message from Camera: op=State serial=76972 05:08:34 GetSingleValue result=40 Value=cccccccc 05:08:34 SkyScan query 05:08:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:08:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:35 Parameters OK 05:08:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:35 Set A/D data flow result=40 05:08:35 Set A/D channel type result=40 05:08:35 Set A/D encoding result=40 05:08:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:35 Set channel filter=0.000000e+000 result=40 05:08:35 Config A/D Result=40 05:08:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:35 Get A/D filter: -9.255963e+061 result=40 05:08:35 Get A/D value=-858993460 result=40 05:08:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:35 Parameters OK 05:08:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:35 Set A/D data flow result=40 05:08:35 Set A/D channel type result=40 05:08:35 Set A/D encoding result=40 05:08:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:35 Set channel filter=0.000000e+000 result=40 05:08:35 Config A/D Result=40 05:08:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:35 Get A/D filter: -9.255963e+061 result=40 05:08:35 Get A/D value=-858993460 result=40 05:08:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:35 Aux= 05:08:35 Message to Camera, serial 76972 queued 05:09:12 Received message from Master: op=PointingHead serial=76985 05:09:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:09:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:09:12 Point started: ret=0 05:09:12 point_skyscan result=0 05:09:13 Check angles 05:09:13 SkyScan query 05:09:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:09:13 Message to Master queued w/err=0: serial=76985 error=0 05:09:18 Received message from Master: op=Filter serial=76986 05:09:18 Color wheel filter change from 0 to 0 05:09:18 FLIGetFilterPos err=0 currentPosition=0 05:09:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:18 Filter is already there-color wheel unchanged 05:09:19 Received message from Master: op=Shutter serial=76987 05:09:19 Shutter LASER close 05:09:19 Received message from Camera: op=State serial=76989 05:09:19 GetSingleValue result=40 Value=cccccccc 05:09:19 SkyScan query 05:09:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:19 Parameters OK 05:09:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:19 Set A/D data flow result=40 05:09:19 Set A/D channel type result=40 05:09:19 Set A/D encoding result=40 05:09:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:19 Set channel filter=0.000000e+000 result=40 05:09:19 Config A/D Result=40 05:09:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:19 Get A/D filter: -9.255963e+061 result=40 05:09:19 Get A/D value=-858993460 result=40 05:09:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:19 Parameters OK 05:09:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:19 Set A/D data flow result=40 05:09:19 Set A/D channel type result=40 05:09:19 Set A/D encoding result=40 05:09:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:19 Set channel filter=0.000000e+000 result=40 05:09:19 Config A/D Result=40 05:09:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:19 Get A/D filter: -9.255963e+061 result=40 05:09:19 Get A/D value=-858993460 result=40 05:09:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:19 Aux= 05:09:19 Message to Camera, serial 76989 queued 05:09:56 Received message from Master: op=PointingHead serial=77002 05:09:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:09:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:09:56 Point started: ret=0 05:09:56 point_skyscan result=0 05:09:57 Check angles 05:09:57 SkyScan query 05:09:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:09:58 Message to Master queued w/err=0: serial=77002 error=0 05:10:03 Received message from Master: op=Filter serial=77003 05:10:03 Color wheel filter change from 0 to 0 05:10:03 FLIGetFilterPos err=0 currentPosition=0 05:10:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:03 Filter is already there-color wheel unchanged 05:10:03 Received message from Master: op=Shutter serial=77004 05:10:03 Shutter LASER close 05:10:03 Received message from Camera: op=State serial=77006 05:10:03 GetSingleValue result=40 Value=cccccccc 05:10:03 SkyScan query 05:10:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:10:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:04 Parameters OK 05:10:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:04 Set A/D data flow result=40 05:10:04 Set A/D channel type result=40 05:10:04 Set A/D encoding result=40 05:10:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:04 Set channel filter=0.000000e+000 result=40 05:10:04 Config A/D Result=40 05:10:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:04 Get A/D filter: -9.255963e+061 result=40 05:10:04 Get A/D value=-858993460 result=40 05:10:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:04 Parameters OK 05:10:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:04 Set A/D data flow result=40 05:10:04 Set A/D channel type result=40 05:10:04 Set A/D encoding result=40 05:10:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:04 Set channel filter=0.000000e+000 result=40 05:10:04 Config A/D Result=40 05:10:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:04 Get A/D filter: -9.255963e+061 result=40 05:10:04 Get A/D value=-858993460 result=40 05:10:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:04 Aux= 05:10:04 Message to Camera, serial 77006 queued 05:10:40 Received message from Master: op=PointingHead serial=77019 05:10:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:10:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:10:41 Point started: ret=0 05:10:41 point_skyscan result=0 05:10:41 Check angles 05:10:41 SkyScan query 05:10:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 05:10:42 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 05:10:42 Check angles 05:10:42 SkyScan query 05:10:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 05:10:43 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 05:10:43 Check angles 05:10:43 SkyScan query 05:10:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 05:10:44 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 05:10:44 Check angles 05:10:44 SkyScan query 05:10:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.145<-17743 Statuses=0008 0009 05:10:44 Msec=2250 True Az=112.995 Ze=-86.145 Az status=0008 Ze status=0009 05:10:44 Check angles 05:10:44 SkyScan query 05:10:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 05:10:45 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 05:10:45 Check angles 05:10:45 SkyScan query 05:10:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 05:10:46 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 05:10:46 Check angles 05:10:46 SkyScan query 05:10:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.43<-21962 Statuses=0008 0009 05:10:47 Msec=4500 True Az=112.995 Ze=-149.43 Az status=0008 Ze status=0009 05:10:47 Check angles 05:10:47 SkyScan query 05:10:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.37<-23358 Statuses=0008 0009 05:10:47 Msec=5250 True Az=112.995 Ze=-170.37 Az status=0008 Ze status=0009 05:10:47 Check angles 05:10:47 SkyScan query 05:10:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:10:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:10:48 Message to Master queued w/err=0: serial=77019 error=0 05:10:53 Received message from Master: op=Filter serial=77020 05:10:53 Color wheel filter change from 0 to 0 05:10:53 FLIGetFilterPos err=0 currentPosition=0 05:10:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:53 Filter is already there-color wheel unchanged 05:10:53 Received message from Master: op=Shutter serial=77021 05:10:53 Shutter LASER open 05:10:53 Received message from Camera: op=State serial=77023 05:10:53 GetSingleValue result=40 Value=cccccccc 05:10:53 SkyScan query 05:10:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:10:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:54 Parameters OK 05:10:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:54 Set A/D data flow result=40 05:10:54 Set A/D channel type result=40 05:10:54 Set A/D encoding result=40 05:10:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:54 Set channel filter=0.000000e+000 result=40 05:10:54 Config A/D Result=40 05:10:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:54 Get A/D filter: -9.255963e+061 result=40 05:10:54 Get A/D value=-858993460 result=40 05:10:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:54 Parameters OK 05:10:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:54 Set A/D data flow result=40 05:10:54 Set A/D channel type result=40 05:10:54 Set A/D encoding result=40 05:10:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:54 Set channel filter=0.000000e+000 result=40 05:10:54 Config A/D Result=40 05:10:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:54 Get A/D filter: -9.255963e+061 result=40 05:10:54 Get A/D value=-858993460 result=40 05:10:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:54 Aux= 05:10:54 Message to Camera, serial 77023 queued 05:11:02 Received message from Master: op=Shutter serial=77033 05:11:02 Shutter LASER close 05:11:03 Received message from Master: op=PointingHead serial=77037 05:11:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:11:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:11:03 Point started: ret=0 05:11:03 point_skyscan result=0 05:11:04 Check angles 05:11:04 SkyScan query 05:11:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 05:11:05 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 05:11:05 Check angles 05:11:05 SkyScan query 05:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 05:11:06 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 05:11:06 Check angles 05:11:06 SkyScan query 05:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.41<-18694 Statuses=0008 0009 05:11:06 Msec=1500 True Az=112.995 Ze=-100.41 Az status=0008 Ze status=0009 05:11:06 Check angles 05:11:06 SkyScan query 05:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.455<-17297 Statuses=0008 0009 05:11:07 Msec=2250 True Az=112.995 Ze=-79.455 Az status=0008 Ze status=0009 05:11:07 Check angles 05:11:07 SkyScan query 05:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 05:11:08 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 05:11:08 Check angles 05:11:08 SkyScan query 05:11:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 05:11:09 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 05:11:09 Check angles 05:11:09 SkyScan query 05:11:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 05:11:09 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 05:11:09 Check angles 05:11:09 SkyScan query 05:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.305<-11713 Statuses=0008 0009 05:11:10 Msec=5250 True Az=112.995 Ze=4.305 Az status=0008 Ze status=0009 05:11:10 Check angles 05:11:10 SkyScan query 05:11:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:11:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:11:11 Message to Master queued w/err=0: serial=77037 error=0 05:11:16 Received message from Master: op=Filter serial=77038 05:11:16 Color wheel filter change from 0 to 0 05:11:16 FLIGetFilterPos err=0 currentPosition=0 05:11:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:16 Filter is already there-color wheel unchanged 05:11:16 Received message from Master: op=Shutter serial=77039 05:11:16 Shutter LASER close 05:11:16 Received message from Camera: op=State serial=77041 05:11:16 GetSingleValue result=40 Value=cccccccc 05:11:16 SkyScan query 05:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:11:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:17 Parameters OK 05:11:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:17 Set A/D data flow result=40 05:11:17 Set A/D channel type result=40 05:11:17 Set A/D encoding result=40 05:11:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:17 Set channel filter=0.000000e+000 result=40 05:11:17 Config A/D Result=40 05:11:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:17 Get A/D filter: -9.255963e+061 result=40 05:11:17 Get A/D value=-858993460 result=40 05:11:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:17 Parameters OK 05:11:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:17 Set A/D data flow result=40 05:11:17 Set A/D channel type result=40 05:11:17 Set A/D encoding result=40 05:11:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:17 Set channel filter=0.000000e+000 result=40 05:11:17 Config A/D Result=40 05:11:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:17 Get A/D filter: -9.255963e+061 result=40 05:11:17 Get A/D value=-858993460 result=40 05:11:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:17 Aux= 05:11:17 Message to Camera, serial 77041 queued 05:11:54 Received message from Master: op=PointingHead serial=77054 05:11:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:11:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:11:54 Point started: ret=0 05:11:54 point_skyscan result=0 05:11:55 Check angles 05:11:55 SkyScan query 05:11:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:11:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:11:55 Message to Master queued w/err=0: serial=77054 error=0 05:12:00 Received message from Master: op=Filter serial=77055 05:12:00 Color wheel filter change from 0 to 0 05:12:00 FLIGetFilterPos err=0 currentPosition=0 05:12:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:00 Filter is already there-color wheel unchanged 05:12:00 Received message from Master: op=Shutter serial=77056 05:12:00 Shutter LASER close 05:12:00 Received message from Camera: op=State serial=77058 05:12:00 GetSingleValue result=40 Value=cccccccc 05:12:00 SkyScan query 05:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:12:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:01 Parameters OK 05:12:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:01 Set A/D data flow result=40 05:12:01 Set A/D channel type result=40 05:12:01 Set A/D encoding result=40 05:12:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:01 Set channel filter=0.000000e+000 result=40 05:12:01 Config A/D Result=40 05:12:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:01 Get A/D filter: -9.255963e+061 result=40 05:12:01 Get A/D value=-858993460 result=40 05:12:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:01 Parameters OK 05:12:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:01 Set A/D data flow result=40 05:12:01 Set A/D channel type result=40 05:12:01 Set A/D encoding result=40 05:12:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:01 Set channel filter=0.000000e+000 result=40 05:12:01 Config A/D Result=40 05:12:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:01 Get A/D filter: -9.255963e+061 result=40 05:12:01 Get A/D value=-858993460 result=40 05:12:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:01 Aux= 05:12:01 Message to Camera, serial 77058 queued 05:12:38 Received message from Master: op=PointingHead serial=77071 05:12:38 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:12:38 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:12:38 Point started: ret=0 05:12:38 point_skyscan result=0 05:12:39 Check angles 05:12:39 SkyScan query 05:12:40 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 05:12:40 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 05:12:40 Check angles 05:12:40 SkyScan query 05:12:40 SkyScan query done: ret=0 az=154.185<-10279 ze=-6.495<-12433 Statuses=0009 0008 05:12:40 Msec=750 True Az=154.185 Ze=-6.495 Az status=0009 Ze status=0008 05:12:40 Check angles 05:12:40 SkyScan query 05:12:41 SkyScan query done: ret=0 az=171.72<-11448 ze=-6.495<-12433 Statuses=0009 0008 05:12:41 Msec=1500 True Az=171.72 Ze=-6.495 Az status=0009 Ze status=0008 05:12:41 Check angles 05:12:41 SkyScan query 05:12:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:12:42 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:12:42 Message to Master queued w/err=0: serial=77071 error=0 05:12:47 Received message from Master: op=Filter serial=77072 05:12:47 Color wheel filter change from 0 to 0 05:12:47 FLIGetFilterPos err=0 currentPosition=0 05:12:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:47 Filter is already there-color wheel unchanged 05:12:47 Received message from Master: op=Shutter serial=77073 05:12:47 Shutter LASER close 05:12:47 Received message from Camera: op=State serial=77075 05:12:47 GetSingleValue result=40 Value=cccccccc 05:12:47 SkyScan query 05:12:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:12:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:48 Parameters OK 05:12:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:48 Set A/D data flow result=40 05:12:48 Set A/D channel type result=40 05:12:48 Set A/D encoding result=40 05:12:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:48 Set channel filter=0.000000e+000 result=40 05:12:48 Config A/D Result=40 05:12:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:48 Get A/D filter: -9.255963e+061 result=40 05:12:48 Get A/D value=-858993460 result=40 05:12:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:48 Parameters OK 05:12:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:48 Set A/D data flow result=40 05:12:48 Set A/D channel type result=40 05:12:48 Set A/D encoding result=40 05:12:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:48 Set channel filter=0.000000e+000 result=40 05:12:48 Config A/D Result=40 05:12:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:48 Get A/D filter: -9.255963e+061 result=40 05:12:48 Get A/D value=-858993460 result=40 05:12:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:48 Aux= 05:12:48 Message to Camera, serial 77075 queued 05:13:24 Received message from Master: op=PointingHead serial=77088 05:13:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:13:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:13:25 Point started: ret=0 05:13:25 point_skyscan result=0 05:13:26 Check angles 05:13:26 SkyScan query 05:13:26 SkyScan query done: ret=0 az=153.165<-10211 ze=6.51<-11566 Statuses=0009 0008 05:13:26 Msec=0 True Az=153.165 Ze=6.51 Az status=0009 Ze status=0008 05:13:26 Check angles 05:13:26 SkyScan query 05:13:27 SkyScan query done: ret=0 az=135.24<-9016 ze=6.495<-11567 Statuses=0009 0008 05:13:27 Msec=750 True Az=135.24 Ze=6.495 Az status=0009 Ze status=0008 05:13:27 Check angles 05:13:27 SkyScan query 05:13:28 SkyScan query done: ret=0 az=117.48<-7832 ze=6.495<-11567 Statuses=0009 0008 05:13:28 Msec=1500 True Az=117.48 Ze=6.495 Az status=0009 Ze status=0008 05:13:28 Check angles 05:13:28 SkyScan query 05:13:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:13:28 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:13:28 Message to Master queued w/err=0: serial=77088 error=0 05:13:33 Received message from Master: op=Filter serial=77089 05:13:33 Color wheel filter change from 0 to 0 05:13:33 FLIGetFilterPos err=0 currentPosition=0 05:13:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:33 Filter is already there-color wheel unchanged 05:13:34 Received message from Master: op=Shutter serial=77090 05:13:34 Shutter LASER close 05:13:34 Received message from Camera: op=State serial=77092 05:13:34 GetSingleValue result=40 Value=cccccccc 05:13:34 SkyScan query 05:13:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:13:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:34 Parameters OK 05:13:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:34 Set A/D data flow result=40 05:13:34 Set A/D channel type result=40 05:13:34 Set A/D encoding result=40 05:13:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:34 Set channel filter=0.000000e+000 result=40 05:13:34 Config A/D Result=40 05:13:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:34 Get A/D filter: -9.255963e+061 result=40 05:13:34 Get A/D value=-858993460 result=40 05:13:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:34 Parameters OK 05:13:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:34 Set A/D data flow result=40 05:13:34 Set A/D channel type result=40 05:13:34 Set A/D encoding result=40 05:13:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:34 Set channel filter=0.000000e+000 result=40 05:13:34 Config A/D Result=40 05:13:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:34 Get A/D filter: -9.255963e+061 result=40 05:13:34 Get A/D value=-858993460 result=40 05:13:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:34 Aux= 05:13:34 Message to Camera, serial 77092 queued 05:14:11 Received message from Master: op=PointingHead serial=77105 05:14:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:14:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:14:11 Point started: ret=0 05:14:11 point_skyscan result=0 05:14:12 Check angles 05:14:12 SkyScan query 05:14:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 05:14:13 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 05:14:13 Check angles 05:14:13 SkyScan query 05:14:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 05:14:13 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 05:14:14 Check angles 05:14:14 SkyScan query 05:14:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 05:14:14 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 05:14:14 Check angles 05:14:14 SkyScan query 05:14:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.58<-17772 Statuses=0008 0009 05:14:15 Msec=2250 True Az=112.995 Ze=-86.58 Az status=0008 Ze status=0009 [UTC 2019-3-3 05:14:15] 05:14:15 Check angles 05:14:15 SkyScan query 05:14:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-109.26<-19284 Statuses=0008 0009 05:14:16 Msec=3000 True Az=112.995 Ze=-109.26 Az status=0008 Ze status=0009 05:14:16 Check angles 05:14:16 SkyScan query 05:14:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 05:14:16 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 05:14:17 Check angles 05:14:17 SkyScan query 05:14:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.415<-21961 Statuses=0008 0009 05:14:17 Msec=4500 True Az=112.995 Ze=-149.415 Az status=0008 Ze status=0009 05:14:17 Check angles 05:14:17 SkyScan query 05:14:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.37<-23358 Statuses=0008 0009 05:14:18 Msec=5250 True Az=112.995 Ze=-170.37 Az status=0008 Ze status=0009 05:14:18 Check angles 05:14:18 SkyScan query 05:14:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:14:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:14:19 Message to Master queued w/err=0: serial=77105 error=0 05:14:24 Received message from Master: op=Filter serial=77106 05:14:24 Color wheel filter change from 0 to 0 05:14:24 FLIGetFilterPos err=0 currentPosition=0 05:14:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:24 Filter is already there-color wheel unchanged 05:14:24 Received message from Master: op=Shutter serial=77107 05:14:24 Shutter LASER open 05:14:24 Received message from Camera: op=State serial=77109 05:14:24 GetSingleValue result=40 Value=cccccccc 05:14:24 SkyScan query 05:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:14:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:25 Parameters OK 05:14:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:25 Set A/D data flow result=40 05:14:25 Set A/D channel type result=40 05:14:25 Set A/D encoding result=40 05:14:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:25 Set channel filter=0.000000e+000 result=40 05:14:25 Config A/D Result=40 05:14:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:25 Get A/D filter: -9.255963e+061 result=40 05:14:25 Get A/D value=-858993460 result=40 05:14:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:25 Parameters OK 05:14:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:25 Set A/D data flow result=40 05:14:25 Set A/D channel type result=40 05:14:25 Set A/D encoding result=40 05:14:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:25 Set channel filter=0.000000e+000 result=40 05:14:25 Config A/D Result=40 05:14:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:25 Get A/D filter: -9.255963e+061 result=40 05:14:25 Get A/D value=-858993460 result=40 05:14:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:25 Aux= 05:14:25 Message to Camera, serial 77109 queued 05:14:33 Received message from Master: op=Shutter serial=77119 05:14:33 Shutter LASER close 05:14:33 Received message from Master: op=PointingHead serial=77123 05:14:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:14:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:14:34 Point started: ret=0 05:14:34 point_skyscan result=0 05:14:35 Check angles 05:14:35 SkyScan query 05:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 05:14:35 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 05:14:35 Check angles 05:14:35 SkyScan query 05:14:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.4<-20160 Statuses=0008 0009 05:14:36 Msec=750 True Az=112.995 Ze=-122.4 Az status=0008 Ze status=0009 05:14:36 Check angles 05:14:36 SkyScan query 05:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 05:14:37 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 05:14:37 Check angles 05:14:37 SkyScan query 05:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.49<-17366 Statuses=0008 0009 05:14:37 Msec=2250 True Az=112.995 Ze=-80.49 Az status=0008 Ze status=0009 05:14:38 Check angles 05:14:38 SkyScan query 05:14:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.535<-15969 Statuses=0008 0009 05:14:38 Msec=3000 True Az=112.995 Ze=-59.535 Az status=0008 Ze status=0009 05:14:38 Check angles 05:14:38 SkyScan query 05:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.13<-14542 Statuses=0008 0009 05:14:39 Msec=3750 True Az=112.995 Ze=-38.13 Az status=0008 Ze status=0009 05:14:39 Check angles 05:14:39 SkyScan query 05:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 05:14:40 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 05:14:40 Check angles 05:14:40 SkyScan query 05:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 05:14:40 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 05:14:41 Check angles 05:14:41 SkyScan query 05:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:14:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:14:41 Message to Master queued w/err=0: serial=77123 error=0 05:14:46 Received message from Master: op=Filter serial=77124 05:14:46 Color wheel filter change from 0 to 0 05:14:46 FLIGetFilterPos err=0 currentPosition=0 05:14:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:46 Filter is already there-color wheel unchanged 05:14:46 Received message from Master: op=Shutter serial=77125 05:14:46 Shutter LASER close 05:14:46 Received message from Camera: op=State serial=77127 05:14:46 GetSingleValue result=40 Value=cccccccc 05:14:46 SkyScan query 05:14:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:14:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:47 Parameters OK 05:14:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:47 Set A/D data flow result=40 05:14:47 Set A/D channel type result=40 05:14:47 Set A/D encoding result=40 05:14:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:47 Set channel filter=0.000000e+000 result=40 05:14:47 Config A/D Result=40 05:14:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:47 Get A/D filter: -9.255963e+061 result=40 05:14:47 Get A/D value=-858993460 result=40 05:14:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:47 Parameters OK 05:14:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:47 Set A/D data flow result=40 05:14:47 Set A/D channel type result=40 05:14:47 Set A/D encoding result=40 05:14:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:47 Set channel filter=0.000000e+000 result=40 05:14:47 Config A/D Result=40 05:14:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:47 Get A/D filter: -9.255963e+061 result=40 05:14:47 Get A/D value=-858993460 result=40 05:14:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:47 Aux= 05:14:47 Message to Camera, serial 77127 queued 05:15:24 Received message from Master: op=PointingHead serial=77140 05:15:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:15:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:15:24 Point started: ret=0 05:15:24 point_skyscan result=0 05:15:25 Check angles 05:15:25 SkyScan query 05:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:15:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:15:26 Message to Master queued w/err=0: serial=77140 error=0 05:15:31 Received message from Master: op=Filter serial=77141 05:15:31 Color wheel filter change from 0 to 0 05:15:31 FLIGetFilterPos err=0 currentPosition=0 05:15:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:31 Filter is already there-color wheel unchanged 05:15:31 Received message from Master: op=Shutter serial=77142 05:15:31 Shutter LASER close 05:15:31 Received message from Camera: op=State serial=77144 05:15:31 GetSingleValue result=40 Value=cccccccc 05:15:31 SkyScan query 05:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:15:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:31 Parameters OK 05:15:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:31 Set A/D data flow result=40 05:15:31 Set A/D channel type result=40 05:15:31 Set A/D encoding result=40 05:15:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:31 Set channel filter=0.000000e+000 result=40 05:15:31 Config A/D Result=40 05:15:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:31 Get A/D filter: -9.255963e+061 result=40 05:15:31 Get A/D value=-858993460 result=40 05:15:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:31 Parameters OK 05:15:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:31 Set A/D data flow result=40 05:15:31 Set A/D channel type result=40 05:15:31 Set A/D encoding result=40 05:15:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:31 Set channel filter=0.000000e+000 result=40 05:15:31 Config A/D Result=40 05:15:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:31 Get A/D filter: -9.255963e+061 result=40 05:15:31 Get A/D value=-858993460 result=40 05:15:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:31 Aux= 05:15:31 Message to Camera, serial 77144 queued 05:16:08 Received message from Master: op=PointingHead serial=77157 05:16:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:16:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:16:09 Point started: ret=0 05:16:09 point_skyscan result=0 05:16:09 Check angles 05:16:09 SkyScan query 05:16:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:16:10 Message to Master queued w/err=0: serial=77157 error=0 05:16:15 Received message from Master: op=Filter serial=77158 05:16:15 Color wheel filter change from 0 to 0 05:16:15 FLIGetFilterPos err=0 currentPosition=0 05:16:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:15 Filter is already there-color wheel unchanged 05:16:15 Received message from Master: op=Shutter serial=77159 05:16:15 Shutter LASER close 05:16:15 Received message from Camera: op=State serial=77161 05:16:15 GetSingleValue result=40 Value=cccccccc 05:16:15 SkyScan query 05:16:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:16 Parameters OK 05:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:16 Set A/D data flow result=40 05:16:16 Set A/D channel type result=40 05:16:16 Set A/D encoding result=40 05:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:16 Set channel filter=0.000000e+000 result=40 05:16:16 Config A/D Result=40 05:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:16 Get A/D filter: -9.255963e+061 result=40 05:16:16 Get A/D value=-858993460 result=40 05:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:16 Parameters OK 05:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:16 Set A/D data flow result=40 05:16:16 Set A/D channel type result=40 05:16:16 Set A/D encoding result=40 05:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:16 Set channel filter=0.000000e+000 result=40 05:16:16 Config A/D Result=40 05:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:16 Get A/D filter: -9.255963e+061 result=40 05:16:16 Get A/D value=-858993460 result=40 05:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:16 Aux= 05:16:16 Message to Camera, serial 77161 queued 05:16:53 Received message from Master: op=PointingHead serial=77174 05:16:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:16:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:16:53 Point started: ret=0 05:16:53 point_skyscan result=0 05:16:54 Check angles 05:16:54 SkyScan query 05:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:16:54 Message to Master queued w/err=0: serial=77174 error=0 05:16:59 Received message from Master: op=Filter serial=77175 05:16:59 Color wheel filter change from 0 to 0 05:16:59 FLIGetFilterPos err=0 currentPosition=0 05:16:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:59 Filter is already there-color wheel unchanged 05:16:59 Received message from Master: op=Shutter serial=77176 05:16:59 Shutter LASER close 05:16:59 Received message from Camera: op=State serial=77178 05:16:59 GetSingleValue result=40 Value=cccccccc 05:16:59 SkyScan query 05:17:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:17:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:00 Parameters OK 05:17:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:00 Set A/D data flow result=40 05:17:00 Set A/D channel type result=40 05:17:00 Set A/D encoding result=40 05:17:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:00 Set channel filter=0.000000e+000 result=40 05:17:00 Config A/D Result=40 05:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:00 Get A/D filter: -9.255963e+061 result=40 05:17:00 Get A/D value=-858993460 result=40 05:17:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:00 Parameters OK 05:17:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:00 Set A/D data flow result=40 05:17:00 Set A/D channel type result=40 05:17:00 Set A/D encoding result=40 05:17:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:00 Set channel filter=0.000000e+000 result=40 05:17:00 Config A/D Result=40 05:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:00 Get A/D filter: -9.255963e+061 result=40 05:17:00 Get A/D value=-858993460 result=40 05:17:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:00 Aux= 05:17:00 Message to Camera, serial 77178 queued 05:17:37 Received message from Master: op=PointingHead serial=77191 05:17:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:17:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:17:37 Point started: ret=0 05:17:37 point_skyscan result=0 05:17:38 Check angles 05:17:38 SkyScan query 05:17:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 05:17:39 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 05:17:39 Check angles 05:17:39 SkyScan query 05:17:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 05:17:39 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 05:17:39 Check angles 05:17:39 SkyScan query 05:17:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 05:17:40 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 05:17:40 Check angles 05:17:40 SkyScan query 05:17:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 05:17:41 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 05:17:41 Check angles 05:17:41 SkyScan query 05:17:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 05:17:42 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 05:17:42 Check angles 05:17:42 SkyScan query 05:17:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 05:17:42 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 05:17:42 Check angles 05:17:42 SkyScan query 05:17:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.745<-21983 Statuses=0008 0009 05:17:43 Msec=4500 True Az=112.995 Ze=-149.745 Az status=0008 Ze status=0009 05:17:43 Check angles 05:17:43 SkyScan query 05:17:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.655<-23377 Statuses=0008 0009 05:17:44 Msec=5250 True Az=112.995 Ze=-170.655 Az status=0008 Ze status=0009 05:17:44 Check angles 05:17:44 SkyScan query 05:17:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:17:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:17:45 Message to Master queued w/err=0: serial=77191 error=0 05:17:50 Received message from Master: op=Filter serial=77192 05:17:50 Color wheel filter change from 0 to 0 05:17:50 FLIGetFilterPos err=0 currentPosition=0 05:17:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:50 Filter is already there-color wheel unchanged 05:17:50 Received message from Master: op=Shutter serial=77193 05:17:50 Shutter LASER open 05:17:50 Received message from Camera: op=State serial=77195 05:17:50 GetSingleValue result=40 Value=cccccccc 05:17:50 SkyScan query 05:17:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:17:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:50 Parameters OK 05:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:50 Set A/D data flow result=40 05:17:50 Set A/D channel type result=40 05:17:50 Set A/D encoding result=40 05:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:50 Set channel filter=0.000000e+000 result=40 05:17:50 Config A/D Result=40 05:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:50 Get A/D filter: -9.255963e+061 result=40 05:17:50 Get A/D value=-858993460 result=40 05:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:50 Parameters OK 05:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:50 Set A/D data flow result=40 05:17:50 Set A/D channel type result=40 05:17:50 Set A/D encoding result=40 05:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:50 Set channel filter=0.000000e+000 result=40 05:17:50 Config A/D Result=40 05:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:50 Get A/D filter: -9.255963e+061 result=40 05:17:50 Get A/D value=-858993460 result=40 05:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:50 Aux= 05:17:50 Message to Camera, serial 77195 queued 05:17:59 Received message from Master: op=Shutter serial=77205 05:17:59 Shutter LASER close 05:18:00 Received message from Master: op=PointingHead serial=77209 05:18:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:18:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:18:00 Point started: ret=0 05:18:00 point_skyscan result=0 05:18:01 Check angles 05:18:01 SkyScan query 05:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.535<-21569 Statuses=0008 0009 05:18:01 Msec=0 True Az=112.995 Ze=-143.535 Az status=0008 Ze status=0009 05:18:01 Check angles 05:18:01 SkyScan query 05:18:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.58<-20172 Statuses=0008 0009 05:18:02 Msec=750 True Az=112.995 Ze=-122.58 Az status=0008 Ze status=0009 05:18:02 Check angles 05:18:02 SkyScan query 05:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.61<-18774 Statuses=0008 0009 05:18:03 Msec=1500 True Az=112.995 Ze=-101.61 Az status=0008 Ze status=0009 05:18:03 Check angles 05:18:03 SkyScan query 05:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.64<-17376 Statuses=0008 0009 05:18:03 Msec=2250 True Az=112.995 Ze=-80.64 Az status=0008 Ze status=0009 05:18:04 Check angles 05:18:04 SkyScan query 05:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.7<-15980 Statuses=0008 0009 05:18:04 Msec=3000 True Az=112.995 Ze=-59.7 Az status=0008 Ze status=0009 05:18:04 Check angles 05:18:04 SkyScan query 05:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.745<-14583 Statuses=0008 0009 05:18:05 Msec=3750 True Az=112.995 Ze=-38.745 Az status=0008 Ze status=0009 05:18:05 Check angles 05:18:05 SkyScan query 05:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.775<-13185 Statuses=0008 0009 05:18:06 Msec=4500 True Az=112.995 Ze=-17.775 Az status=0008 Ze status=0009 05:18:06 Check angles 05:18:06 SkyScan query 05:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=3.165<-11789 Statuses=0008 0009 05:18:06 Msec=5250 True Az=112.995 Ze=3.165 Az status=0008 Ze status=0009 05:18:07 Check angles 05:18:07 SkyScan query 05:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:18:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:18:07 Message to Master queued w/err=0: serial=77209 error=0 05:18:12 Received message from Master: op=Filter serial=77210 05:18:12 Color wheel filter change from 0 to 0 05:18:12 FLIGetFilterPos err=0 currentPosition=0 05:18:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:12 Filter is already there-color wheel unchanged 05:18:12 Received message from Master: op=Shutter serial=77211 05:18:12 Shutter LASER close 05:18:13 Received message from Camera: op=State serial=77213 05:18:13 GetSingleValue result=40 Value=cccccccc 05:18:13 SkyScan query 05:18:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:18:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:13 Parameters OK 05:18:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:13 Set A/D data flow result=40 05:18:13 Set A/D channel type result=40 05:18:13 Set A/D encoding result=40 05:18:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:13 Set channel filter=0.000000e+000 result=40 05:18:13 Config A/D Result=40 05:18:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:13 Get A/D filter: -9.255963e+061 result=40 05:18:13 Get A/D value=-858993460 result=40 05:18:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:13 Parameters OK 05:18:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:13 Set A/D data flow result=40 05:18:13 Set A/D channel type result=40 05:18:13 Set A/D encoding result=40 05:18:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:13 Set channel filter=0.000000e+000 result=40 05:18:13 Config A/D Result=40 05:18:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:13 Get A/D filter: -9.255963e+061 result=40 05:18:13 Get A/D value=-858993460 result=40 05:18:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:13 Aux= 05:18:13 Message to Camera, serial 77213 queued 05:18:50 Received message from Master: op=PointingHead serial=77226 05:18:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:18:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:18:50 Point started: ret=0 05:18:50 point_skyscan result=0 05:18:51 Check angles 05:18:51 SkyScan query 05:18:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:18:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:18:52 Message to Master queued w/err=0: serial=77226 error=0 05:18:57 Received message from Master: op=Filter serial=77227 05:18:57 Color wheel filter change from 0 to 0 05:18:57 FLIGetFilterPos err=0 currentPosition=0 05:18:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:57 Filter is already there-color wheel unchanged 05:18:57 Received message from Master: op=Shutter serial=77228 05:18:57 Shutter LASER close 05:18:57 Received message from Camera: op=State serial=77230 05:18:57 GetSingleValue result=40 Value=cccccccc 05:18:57 SkyScan query 05:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:18:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:57 Parameters OK 05:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:57 Set A/D data flow result=40 05:18:57 Set A/D channel type result=40 05:18:57 Set A/D encoding result=40 05:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:57 Set channel filter=0.000000e+000 result=40 05:18:57 Config A/D Result=40 05:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:57 Get A/D filter: -9.255963e+061 result=40 05:18:57 Get A/D value=-858993460 result=40 05:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:57 Parameters OK 05:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:57 Set A/D data flow result=40 05:18:57 Set A/D channel type result=40 05:18:57 Set A/D encoding result=40 05:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:57 Set channel filter=0.000000e+000 result=40 05:18:57 Config A/D Result=40 05:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:57 Get A/D filter: -9.255963e+061 result=40 05:18:57 Get A/D value=-858993460 result=40 05:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:57 Aux= 05:18:57 Message to Camera, serial 77230 queued 05:19:34 Received message from Master: op=PointingHead serial=77243 05:19:34 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:19:34 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:19:35 Point started: ret=0 05:19:35 point_skyscan result=0 05:19:35 Check angles 05:19:35 SkyScan query 05:19:36 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 05:19:36 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 05:19:36 Check angles 05:19:36 SkyScan query 05:19:37 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.495<-12433 Statuses=0009 0008 05:19:37 Msec=750 True Az=153.345 Ze=-6.495 Az status=0009 Ze status=0008 05:19:37 Check angles 05:19:37 SkyScan query 05:19:37 SkyScan query done: ret=0 az=170.67<-11378 ze=-6.495<-12433 Statuses=0009 0008 05:19:37 Msec=1500 True Az=170.67 Ze=-6.495 Az status=0009 Ze status=0008 05:19:38 Check angles 05:19:38 SkyScan query 05:19:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:19:38 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:19:38 Message to Master queued w/err=0: serial=77243 error=0 05:19:43 Received message from Master: op=Filter serial=77244 05:19:43 Color wheel filter change from 0 to 0 05:19:43 FLIGetFilterPos err=0 currentPosition=0 05:19:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:43 Filter is already there-color wheel unchanged 05:19:43 Received message from Master: op=Shutter serial=77245 05:19:43 Shutter LASER close 05:19:43 Received message from Camera: op=State serial=77247 05:19:43 GetSingleValue result=40 Value=cccccccc 05:19:43 SkyScan query 05:19:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:19:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:44 Parameters OK 05:19:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:44 Set A/D data flow result=40 05:19:44 Set A/D channel type result=40 05:19:44 Set A/D encoding result=40 05:19:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:44 Set channel filter=0.000000e+000 result=40 05:19:44 Config A/D Result=40 05:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:44 Get A/D filter: -9.255963e+061 result=40 05:19:44 Get A/D value=-858993460 result=40 05:19:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:44 Parameters OK 05:19:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:44 Set A/D data flow result=40 05:19:44 Set A/D channel type result=40 05:19:44 Set A/D encoding result=40 05:19:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:44 Set channel filter=0.000000e+000 result=40 05:19:44 Config A/D Result=40 05:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:44 Get A/D filter: -9.255963e+061 result=40 05:19:44 Get A/D value=-858993460 result=40 05:19:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:44 Aux= 05:19:44 Message to Camera, serial 77247 queued 05:20:21 Received message from Master: op=PointingHead serial=77260 05:20:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:20:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:20:21 Point started: ret=0 05:20:21 point_skyscan result=0 05:20:22 Check angles 05:20:22 SkyScan query 05:20:22 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 05:20:22 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 05:20:23 Check angles 05:20:23 SkyScan query 05:20:23 SkyScan query done: ret=0 az=135.405<-9027 ze=6.495<-11567 Statuses=0009 0008 05:20:23 Msec=750 True Az=135.405 Ze=6.495 Az status=0009 Ze status=0008 05:20:23 Check angles 05:20:23 SkyScan query 05:20:24 SkyScan query done: ret=0 az=117.9<-7860 ze=6.495<-11567 Statuses=0009 0008 05:20:24 Msec=1500 True Az=117.9 Ze=6.495 Az status=0009 Ze status=0008 05:20:24 Check angles 05:20:24 SkyScan query 05:20:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:20:25 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:20:25 Message to Master queued w/err=0: serial=77260 error=0 05:20:30 Received message from Master: op=Filter serial=77261 05:20:30 Color wheel filter change from 0 to 0 05:20:30 FLIGetFilterPos err=0 currentPosition=0 05:20:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:30 Filter is already there-color wheel unchanged 05:20:30 Received message from Master: op=Shutter serial=77262 05:20:30 Shutter LASER close 05:20:30 Received message from Camera: op=State serial=77264 05:20:30 GetSingleValue result=40 Value=cccccccc 05:20:30 SkyScan query 05:20:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:20:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:31 Parameters OK 05:20:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:31 Set A/D data flow result=40 05:20:31 Set A/D channel type result=40 05:20:31 Set A/D encoding result=40 05:20:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:31 Set channel filter=0.000000e+000 result=40 05:20:31 Config A/D Result=40 05:20:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:31 Get A/D filter: -9.255963e+061 result=40 05:20:31 Get A/D value=-858993460 result=40 05:20:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:31 Parameters OK 05:20:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:31 Set A/D data flow result=40 05:20:31 Set A/D channel type result=40 05:20:31 Set A/D encoding result=40 05:20:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:31 Set channel filter=0.000000e+000 result=40 05:20:31 Config A/D Result=40 05:20:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:31 Get A/D filter: -9.255963e+061 result=40 05:20:31 Get A/D value=-858993460 result=40 05:20:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:31 Aux= 05:20:31 Message to Camera, serial 77264 queued 05:21:06 Received message from Master: op=PointingHead serial=77276 05:21:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:21:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:21:07 Point started: ret=0 05:21:07 point_skyscan result=0 05:21:08 Check angles 05:21:08 SkyScan query 05:21:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 05:21:08 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 05:21:08 Check angles 05:21:08 SkyScan query 05:21:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 05:21:09 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 05:21:09 Check angles 05:21:09 SkyScan query 05:21:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.97<-16398 Statuses=0008 0009 05:21:10 Msec=1500 True Az=112.995 Ze=-65.97 Az status=0008 Ze status=0009 05:21:10 Check angles 05:21:10 SkyScan query 05:21:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 05:21:10 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 05:21:11 Check angles 05:21:11 SkyScan query 05:21:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 05:21:11 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 05:21:11 Check angles 05:21:11 SkyScan query 05:21:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.805<-20587 Statuses=0008 0009 05:21:12 Msec=3750 True Az=112.995 Ze=-128.805 Az status=0008 Ze status=0009 05:21:12 Check angles 05:21:12 SkyScan query 05:21:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.775<-21985 Statuses=0008 0009 05:21:13 Msec=4500 True Az=112.995 Ze=-149.775 Az status=0008 Ze status=0009 05:21:13 Check angles 05:21:13 SkyScan query 05:21:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.685<-23379 Statuses=0008 0009 05:21:13 Msec=5250 True Az=112.995 Ze=-170.685 Az status=0008 Ze status=0009 05:21:14 Check angles 05:21:14 SkyScan query 05:21:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:21:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:21:14 Message to Master queued w/err=0: serial=77276 error=0 05:21:19 Received message from Master: op=Filter serial=77277 05:21:19 Color wheel filter change from 0 to 0 05:21:19 FLIGetFilterPos err=0 currentPosition=0 05:21:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:19 Filter is already there-color wheel unchanged 05:21:19 Received message from Master: op=Shutter serial=77278 05:21:19 Shutter LASER open 05:21:20 Received message from Camera: op=State serial=77280 05:21:20 GetSingleValue result=40 Value=cccccccc 05:21:20 SkyScan query 05:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:21:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:20 Parameters OK 05:21:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:20 Set A/D data flow result=40 05:21:20 Set A/D channel type result=40 05:21:20 Set A/D encoding result=40 05:21:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:20 Set channel filter=0.000000e+000 result=40 05:21:20 Config A/D Result=40 05:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:20 Get A/D filter: -9.255963e+061 result=40 05:21:20 Get A/D value=-858993460 result=40 05:21:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:20 Parameters OK 05:21:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:20 Set A/D data flow result=40 05:21:20 Set A/D channel type result=40 05:21:20 Set A/D encoding result=40 05:21:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:20 Set channel filter=0.000000e+000 result=40 05:21:20 Config A/D Result=40 05:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:20 Get A/D filter: -9.255963e+061 result=40 05:21:20 Get A/D value=-858993460 result=40 05:21:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:20 Aux= 05:21:20 Message to Camera, serial 77280 queued 05:21:29 Received message from Master: op=Shutter serial=77290 05:21:29 Shutter LASER close 05:21:29 Received message from Master: op=PointingHead serial=77294 05:21:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:21:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:21:29 Point started: ret=0 05:21:29 point_skyscan result=0 05:21:30 Check angles 05:21:30 SkyScan query 05:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.71<-21514 Statuses=0008 0009 05:21:31 Msec=0 True Az=112.995 Ze=-142.71 Az status=0008 Ze status=0009 05:21:31 Check angles 05:21:31 SkyScan query 05:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 05:21:31 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 05:21:32 Check angles 05:21:32 SkyScan query 05:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.8<-18720 Statuses=0008 0009 05:21:32 Msec=1500 True Az=112.995 Ze=-100.8 Az status=0008 Ze status=0009 05:21:32 Check angles 05:21:32 SkyScan query 05:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 05:21:33 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 05:21:33 Check angles 05:21:33 SkyScan query 05:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.905<-15927 Statuses=0008 0009 05:21:34 Msec=3000 True Az=112.995 Ze=-58.905 Az status=0008 Ze status=0009 05:21:34 Check angles 05:21:34 SkyScan query 05:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.515<-14501 Statuses=0008 0009 05:21:34 Msec=3750 True Az=112.995 Ze=-37.515 Az status=0008 Ze status=0009 05:21:35 Check angles 05:21:35 SkyScan query 05:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.545<-13103 Statuses=0008 0009 05:21:35 Msec=4500 True Az=112.995 Ze=-16.545 Az status=0008 Ze status=0009 05:21:35 Check angles 05:21:35 SkyScan query 05:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=4.35<-11710 Statuses=0008 0009 05:21:36 Msec=5250 True Az=112.995 Ze=4.35 Az status=0008 Ze status=0009 05:21:36 Check angles 05:21:36 SkyScan query 05:21:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:21:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:21:37 Message to Master queued w/err=0: serial=77294 error=0 05:21:42 Received message from Master: op=Filter serial=77295 05:21:42 Color wheel filter change from 0 to 0 05:21:42 FLIGetFilterPos err=0 currentPosition=0 05:21:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:42 Filter is already there-color wheel unchanged 05:21:42 Received message from Master: op=Shutter serial=77296 05:21:42 Shutter LASER close 05:21:42 Received message from Camera: op=State serial=77298 05:21:42 GetSingleValue result=40 Value=cccccccc 05:21:42 SkyScan query 05:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:21:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:43 Parameters OK 05:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:43 Set A/D data flow result=40 05:21:43 Set A/D channel type result=40 05:21:43 Set A/D encoding result=40 05:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:43 Set channel filter=0.000000e+000 result=40 05:21:43 Config A/D Result=40 05:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:43 Get A/D filter: -9.255963e+061 result=40 05:21:43 Get A/D value=-858993460 result=40 05:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:43 Parameters OK 05:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:43 Set A/D data flow result=40 05:21:43 Set A/D channel type result=40 05:21:43 Set A/D encoding result=40 05:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:43 Set channel filter=0.000000e+000 result=40 05:21:43 Config A/D Result=40 05:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:43 Get A/D filter: -9.255963e+061 result=40 05:21:43 Get A/D value=-858993460 result=40 05:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:43 Aux= 05:21:43 Message to Camera, serial 77298 queued 05:22:19 Received message from Master: op=PointingHead serial=77311 05:22:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:22:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:22:20 Point started: ret=0 05:22:20 point_skyscan result=0 05:22:21 Check angles 05:22:21 SkyScan query 05:22:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:22:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:22:21 Message to Master queued w/err=0: serial=77311 error=0 05:22:26 Received message from Master: op=Filter serial=77312 05:22:26 Color wheel filter change from 0 to 0 05:22:26 FLIGetFilterPos err=0 currentPosition=0 05:22:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:26 Filter is already there-color wheel unchanged 05:22:26 Received message from Master: op=Shutter serial=77313 05:22:26 Shutter LASER close 05:22:26 Received message from Camera: op=State serial=77315 05:22:26 GetSingleValue result=40 Value=cccccccc 05:22:26 SkyScan query 05:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:22:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:27 Parameters OK 05:22:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:27 Set A/D data flow result=40 05:22:27 Set A/D channel type result=40 05:22:27 Set A/D encoding result=40 05:22:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:27 Set channel filter=0.000000e+000 result=40 05:22:27 Config A/D Result=40 05:22:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:27 Get A/D filter: -9.255963e+061 result=40 05:22:27 Get A/D value=-858993460 result=40 05:22:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:27 Parameters OK 05:22:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:27 Set A/D data flow result=40 05:22:27 Set A/D channel type result=40 05:22:27 Set A/D encoding result=40 05:22:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:27 Set channel filter=0.000000e+000 result=40 05:22:27 Config A/D Result=40 05:22:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:27 Get A/D filter: -9.255963e+061 result=40 05:22:27 Get A/D value=-858993460 result=40 05:22:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:27 Aux= 05:22:27 Message to Camera, serial 77315 queued 05:23:04 Received message from Master: op=PointingHead serial=77328 05:23:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:23:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:23:04 Point started: ret=0 05:23:04 point_skyscan result=0 05:23:05 Check angles 05:23:05 SkyScan query 05:23:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:23:05 Message to Master queued w/err=0: serial=77328 error=0 05:23:10 Received message from Master: op=Filter serial=77329 05:23:10 Color wheel filter change from 0 to 0 05:23:10 FLIGetFilterPos err=0 currentPosition=0 05:23:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:10 Filter is already there-color wheel unchanged 05:23:11 Received message from Master: op=Shutter serial=77330 05:23:11 Shutter LASER close 05:23:11 Received message from Camera: op=State serial=77332 05:23:11 GetSingleValue result=40 Value=cccccccc 05:23:11 SkyScan query 05:23:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:11 Parameters OK 05:23:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:11 Set A/D data flow result=40 05:23:11 Set A/D channel type result=40 05:23:11 Set A/D encoding result=40 05:23:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:11 Set channel filter=0.000000e+000 result=40 05:23:11 Config A/D Result=40 05:23:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:11 Get A/D filter: -9.255963e+061 result=40 05:23:11 Get A/D value=-858993460 result=40 05:23:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:11 Parameters OK 05:23:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:11 Set A/D data flow result=40 05:23:11 Set A/D channel type result=40 05:23:11 Set A/D encoding result=40 05:23:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:11 Set channel filter=0.000000e+000 result=40 05:23:11 Config A/D Result=40 05:23:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:11 Get A/D filter: -9.255963e+061 result=40 05:23:11 Get A/D value=-858993460 result=40 05:23:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:11 Aux= 05:23:11 Message to Camera, serial 77332 queued 05:23:48 Received message from Master: op=PointingHead serial=77345 05:23:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:23:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:23:48 Point started: ret=0 05:23:48 point_skyscan result=0 05:23:49 Check angles 05:23:49 SkyScan query 05:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:23:50 Message to Master queued w/err=0: serial=77345 error=0 [UTC 2019-3-3 05:23:50] 05:23:55 Received message from Master: op=Filter serial=77346 05:23:55 Color wheel filter change from 0 to 0 05:23:55 FLIGetFilterPos err=0 currentPosition=0 05:23:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:55 Filter is already there-color wheel unchanged 05:23:55 Received message from Master: op=Shutter serial=77347 05:23:55 Shutter LASER close 05:23:55 Received message from Camera: op=State serial=77349 05:23:55 GetSingleValue result=40 Value=cccccccc 05:23:55 SkyScan query 05:23:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:56 Parameters OK 05:23:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:56 Set A/D data flow result=40 05:23:56 Set A/D channel type result=40 05:23:56 Set A/D encoding result=40 05:23:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:56 Set channel filter=0.000000e+000 result=40 05:23:56 Config A/D Result=40 05:23:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:56 Get A/D filter: -9.255963e+061 result=40 05:23:56 Get A/D value=-858993460 result=40 05:23:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:56 Parameters OK 05:23:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:56 Set A/D data flow result=40 05:23:56 Set A/D channel type result=40 05:23:56 Set A/D encoding result=40 05:23:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:56 Set channel filter=0.000000e+000 result=40 05:23:56 Config A/D Result=40 05:23:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:56 Get A/D filter: -9.255963e+061 result=40 05:23:56 Get A/D value=-858993460 result=40 05:23:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:56 Aux= 05:23:56 Message to Camera, serial 77349 queued 05:24:32 Received message from Master: op=PointingHead serial=77362 05:24:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:24:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:24:33 Point started: ret=0 05:24:33 point_skyscan result=0 05:24:33 Check angles 05:24:33 SkyScan query 05:24:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 05:24:34 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 05:24:34 Check angles 05:24:34 SkyScan query 05:24:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 05:24:35 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 05:24:35 Check angles 05:24:35 SkyScan query 05:24:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 05:24:36 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 05:24:36 Check angles 05:24:36 SkyScan query 05:24:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.595<-17773 Statuses=0008 0009 05:24:36 Msec=2250 True Az=112.995 Ze=-86.595 Az status=0008 Ze status=0009 05:24:36 Check angles 05:24:36 SkyScan query 05:24:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.55<-19170 Statuses=0008 0009 05:24:37 Msec=3000 True Az=112.995 Ze=-107.55 Az status=0008 Ze status=0009 05:24:37 Check angles 05:24:37 SkyScan query 05:24:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.49<-20566 Statuses=0008 0009 05:24:38 Msec=3750 True Az=112.995 Ze=-128.49 Az status=0008 Ze status=0009 05:24:38 Check angles 05:24:38 SkyScan query 05:24:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.475<-21965 Statuses=0008 0009 05:24:39 Msec=4500 True Az=112.995 Ze=-149.475 Az status=0008 Ze status=0009 05:24:39 Check angles 05:24:39 SkyScan query 05:24:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.4<-23360 Statuses=0008 0009 05:24:39 Msec=5250 True Az=112.995 Ze=-170.4 Az status=0008 Ze status=0009 05:24:39 Check angles 05:24:39 SkyScan query 05:24:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:24:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:24:40 Message to Master queued w/err=0: serial=77362 error=0 05:24:45 Received message from Master: op=Filter serial=77363 05:24:45 Color wheel filter change from 0 to 0 05:24:45 FLIGetFilterPos err=0 currentPosition=0 05:24:45 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:45 Filter is already there-color wheel unchanged 05:24:45 Received message from Master: op=Shutter serial=77364 05:24:45 Shutter LASER open 05:24:45 Received message from Camera: op=State serial=77366 05:24:45 GetSingleValue result=40 Value=cccccccc 05:24:45 SkyScan query 05:24:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:24:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:46 Parameters OK 05:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:46 Set A/D data flow result=40 05:24:46 Set A/D channel type result=40 05:24:46 Set A/D encoding result=40 05:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:46 Set channel filter=0.000000e+000 result=40 05:24:46 Config A/D Result=40 05:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:46 Get A/D filter: -9.255963e+061 result=40 05:24:46 Get A/D value=-858993460 result=40 05:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:46 Parameters OK 05:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:46 Set A/D data flow result=40 05:24:46 Set A/D channel type result=40 05:24:46 Set A/D encoding result=40 05:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:46 Set channel filter=0.000000e+000 result=40 05:24:46 Config A/D Result=40 05:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:46 Get A/D filter: -9.255963e+061 result=40 05:24:46 Get A/D value=-858993460 result=40 05:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:46 Aux= 05:24:46 Message to Camera, serial 77366 queued 05:24:54 Received message from Master: op=Shutter serial=77376 05:24:54 Shutter LASER close 05:24:55 Received message from Master: op=PointingHead serial=77380 05:24:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:24:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:24:55 Point started: ret=0 05:24:55 point_skyscan result=0 05:24:56 Check angles 05:24:56 SkyScan query 05:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 05:24:57 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 05:24:57 Check angles 05:24:57 SkyScan query 05:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 05:24:58 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 05:24:58 Check angles 05:24:58 SkyScan query 05:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 05:24:58 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 05:24:58 Check angles 05:24:58 SkyScan query 05:24:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 05:24:59 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 05:24:59 Check angles 05:24:59 SkyScan query 05:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 05:25:00 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 05:25:00 Check angles 05:25:00 SkyScan query 05:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 05:25:01 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 05:25:01 Check angles 05:25:01 SkyScan query 05:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 05:25:01 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 05:25:01 Check angles 05:25:01 SkyScan query 05:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=4.245<-11717 Statuses=0008 0009 05:25:02 Msec=5250 True Az=112.995 Ze=4.245 Az status=0008 Ze status=0009 05:25:02 Check angles 05:25:02 SkyScan query 05:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:25:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:25:03 Message to Master queued w/err=0: serial=77380 error=0 05:25:08 Received message from Master: op=Filter serial=77381 05:25:08 Color wheel filter change from 0 to 0 05:25:08 FLIGetFilterPos err=0 currentPosition=0 05:25:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:08 Filter is already there-color wheel unchanged 05:25:08 Received message from Master: op=Shutter serial=77382 05:25:08 Shutter LASER close 05:25:08 Received message from Camera: op=State serial=77384 05:25:08 GetSingleValue result=40 Value=cccccccc 05:25:08 SkyScan query 05:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:25:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:09 Parameters OK 05:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:09 Set A/D data flow result=40 05:25:09 Set A/D channel type result=40 05:25:09 Set A/D encoding result=40 05:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:09 Set channel filter=0.000000e+000 result=40 05:25:09 Config A/D Result=40 05:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:09 Get A/D filter: -9.255963e+061 result=40 05:25:09 Get A/D value=-858993460 result=40 05:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:09 Parameters OK 05:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:09 Set A/D data flow result=40 05:25:09 Set A/D channel type result=40 05:25:09 Set A/D encoding result=40 05:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:09 Set channel filter=0.000000e+000 result=40 05:25:09 Config A/D Result=40 05:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:09 Get A/D filter: -9.255963e+061 result=40 05:25:09 Get A/D value=-858993460 result=40 05:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:09 Aux= 05:25:09 Message to Camera, serial 77384 queued 05:25:46 Received message from Master: op=PointingHead serial=77397 05:25:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:25:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:25:46 Point started: ret=0 05:25:46 point_skyscan result=0 05:25:47 Check angles 05:25:47 SkyScan query 05:25:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:25:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:25:47 Message to Master queued w/err=0: serial=77397 error=0 05:25:52 Received message from Master: op=Filter serial=77398 05:25:52 Color wheel filter change from 0 to 0 05:25:52 FLIGetFilterPos err=0 currentPosition=0 05:25:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:52 Filter is already there-color wheel unchanged 05:25:52 Received message from Master: op=Shutter serial=77399 05:25:52 Shutter LASER close 05:25:52 Received message from Camera: op=State serial=77401 05:25:52 GetSingleValue result=40 Value=cccccccc 05:25:52 SkyScan query 05:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:25:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:53 Parameters OK 05:25:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:53 Set A/D data flow result=40 05:25:53 Set A/D channel type result=40 05:25:53 Set A/D encoding result=40 05:25:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:53 Set channel filter=0.000000e+000 result=40 05:25:53 Config A/D Result=40 05:25:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:53 Get A/D filter: -9.255963e+061 result=40 05:25:53 Get A/D value=-858993460 result=40 05:25:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:53 Parameters OK 05:25:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:53 Set A/D data flow result=40 05:25:53 Set A/D channel type result=40 05:25:53 Set A/D encoding result=40 05:25:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:53 Set channel filter=0.000000e+000 result=40 05:25:53 Config A/D Result=40 05:25:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:53 Get A/D filter: -9.255963e+061 result=40 05:25:53 Get A/D value=-858993460 result=40 05:25:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:53 Aux= 05:25:53 Message to Camera, serial 77401 queued 05:26:30 Received message from Master: op=PointingHead serial=77414 05:26:30 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:26:30 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:26:30 Point started: ret=0 05:26:30 point_skyscan result=0 05:26:31 Check angles 05:26:31 SkyScan query 05:26:32 SkyScan query done: ret=0 az=136.08<-9072 ze=-6.51<-12434 Statuses=0009 0008 05:26:32 Msec=0 True Az=136.08 Ze=-6.51 Az status=0009 Ze status=0008 05:26:32 Check angles 05:26:32 SkyScan query 05:26:32 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.495<-12433 Statuses=0009 0008 05:26:32 Msec=750 True Az=153.51 Ze=-6.495 Az status=0009 Ze status=0008 05:26:32 Check angles 05:26:32 SkyScan query 05:26:33 SkyScan query done: ret=0 az=171.06<-11404 ze=-6.495<-12433 Statuses=0009 0008 05:26:33 Msec=1500 True Az=171.06 Ze=-6.495 Az status=0009 Ze status=0008 05:26:33 Check angles 05:26:33 SkyScan query 05:26:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:26:34 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:26:34 Message to Master queued w/err=0: serial=77414 error=0 05:26:39 Received message from Master: op=Filter serial=77415 05:26:39 Color wheel filter change from 0 to 0 05:26:39 FLIGetFilterPos err=0 currentPosition=0 05:26:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:39 Filter is already there-color wheel unchanged 05:26:39 Received message from Master: op=Shutter serial=77416 05:26:39 Shutter LASER close 05:26:39 Received message from Camera: op=State serial=77418 05:26:39 GetSingleValue result=40 Value=cccccccc 05:26:39 SkyScan query 05:26:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:26:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:40 Parameters OK 05:26:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:40 Set A/D data flow result=40 05:26:40 Set A/D channel type result=40 05:26:40 Set A/D encoding result=40 05:26:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:40 Set channel filter=0.000000e+000 result=40 05:26:40 Config A/D Result=40 05:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:40 Get A/D filter: -9.255963e+061 result=40 05:26:40 Get A/D value=-858993460 result=40 05:26:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:40 Parameters OK 05:26:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:40 Set A/D data flow result=40 05:26:40 Set A/D channel type result=40 05:26:40 Set A/D encoding result=40 05:26:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:40 Set channel filter=0.000000e+000 result=40 05:26:40 Config A/D Result=40 05:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:40 Get A/D filter: -9.255963e+061 result=40 05:26:40 Get A/D value=-858993460 result=40 05:26:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:40 Aux= 05:26:40 Message to Camera, serial 77418 queued 05:27:16 Received message from Master: op=PointingHead serial=77431 05:27:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:27:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:27:17 Point started: ret=0 05:27:17 point_skyscan result=0 05:27:18 Check angles 05:27:18 SkyScan query 05:27:18 SkyScan query done: ret=0 az=152.895<-10193 ze=6.51<-11566 Statuses=0009 0008 05:27:18 Msec=0 True Az=152.895 Ze=6.51 Az status=0009 Ze status=0008 05:27:18 Check angles 05:27:18 SkyScan query 05:27:19 SkyScan query done: ret=0 az=135.015<-9001 ze=6.495<-11567 Statuses=0009 0008 05:27:19 Msec=750 True Az=135.015 Ze=6.495 Az status=0009 Ze status=0008 05:27:19 Check angles 05:27:19 SkyScan query 05:27:20 SkyScan query done: ret=0 az=117.57<-7838 ze=6.495<-11567 Statuses=0009 0008 05:27:20 Msec=1500 True Az=117.57 Ze=6.495 Az status=0009 Ze status=0008 05:27:20 Check angles 05:27:20 SkyScan query 05:27:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:27:20 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:27:20 Message to Master queued w/err=0: serial=77431 error=0 05:27:25 Received message from Master: op=Filter serial=77432 05:27:25 Color wheel filter change from 0 to 0 05:27:25 FLIGetFilterPos err=0 currentPosition=0 05:27:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:25 Filter is already there-color wheel unchanged 05:27:26 Received message from Master: op=Shutter serial=77433 05:27:26 Shutter LASER close 05:27:26 Received message from Camera: op=State serial=77435 05:27:26 GetSingleValue result=40 Value=cccccccc 05:27:26 SkyScan query 05:27:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:27:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:26 Parameters OK 05:27:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:26 Set A/D data flow result=40 05:27:26 Set A/D channel type result=40 05:27:26 Set A/D encoding result=40 05:27:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:26 Set channel filter=0.000000e+000 result=40 05:27:26 Config A/D Result=40 05:27:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:26 Get A/D filter: -9.255963e+061 result=40 05:27:26 Get A/D value=-858993460 result=40 05:27:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:26 Parameters OK 05:27:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:26 Set A/D data flow result=40 05:27:26 Set A/D channel type result=40 05:27:26 Set A/D encoding result=40 05:27:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:26 Set channel filter=0.000000e+000 result=40 05:27:26 Config A/D Result=40 05:27:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:26 Get A/D filter: -9.255963e+061 result=40 05:27:26 Get A/D value=-858993460 result=40 05:27:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:26 Aux= 05:27:26 Message to Camera, serial 77435 queued 05:28:03 Received message from Master: op=PointingHead serial=77448 05:28:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:28:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:28:03 Point started: ret=0 05:28:03 point_skyscan result=0 05:28:04 Check angles 05:28:04 SkyScan query 05:28:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.98<-13532 Statuses=0008 0009 05:28:05 Msec=0 True Az=112.995 Ze=-22.98 Az status=0008 Ze status=0009 05:28:05 Check angles 05:28:05 SkyScan query 05:28:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.965<-14931 Statuses=0008 0009 05:28:05 Msec=750 True Az=112.995 Ze=-43.965 Az status=0008 Ze status=0009 05:28:06 Check angles 05:28:06 SkyScan query 05:28:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.905<-16327 Statuses=0008 0009 05:28:06 Msec=1500 True Az=112.995 Ze=-64.905 Az status=0008 Ze status=0009 05:28:06 Check angles 05:28:06 SkyScan query 05:28:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.905<-17727 Statuses=0008 0009 05:28:07 Msec=2250 True Az=112.995 Ze=-85.905 Az status=0008 Ze status=0009 05:28:07 Check angles 05:28:07 SkyScan query 05:28:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.83<-19122 Statuses=0008 0009 05:28:08 Msec=3000 True Az=112.995 Ze=-106.83 Az status=0008 Ze status=0009 05:28:08 Check angles 05:28:08 SkyScan query 05:28:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.77<-20518 Statuses=0008 0009 05:28:08 Msec=3750 True Az=112.995 Ze=-127.77 Az status=0008 Ze status=0009 05:28:09 Check angles 05:28:09 SkyScan query 05:28:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.725<-21915 Statuses=0008 0009 05:28:09 Msec=4500 True Az=112.995 Ze=-148.725 Az status=0008 Ze status=0009 05:28:09 Check angles 05:28:09 SkyScan query 05:28:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.665<-23311 Statuses=0008 0009 05:28:10 Msec=5250 True Az=112.995 Ze=-169.665 Az status=0008 Ze status=0009 05:28:10 Check angles 05:28:10 SkyScan query 05:28:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:28:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:28:11 Message to Master queued w/err=0: serial=77448 error=0 05:28:16 Received message from Master: op=Filter serial=77449 05:28:16 Color wheel filter change from 0 to 0 05:28:16 FLIGetFilterPos err=0 currentPosition=0 05:28:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:16 Filter is already there-color wheel unchanged 05:28:16 Received message from Master: op=Shutter serial=77450 05:28:16 Shutter LASER open 05:28:16 Received message from Camera: op=State serial=77452 05:28:16 GetSingleValue result=40 Value=cccccccc 05:28:16 SkyScan query 05:28:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:28:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:17 Parameters OK 05:28:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:17 Set A/D data flow result=40 05:28:17 Set A/D channel type result=40 05:28:17 Set A/D encoding result=40 05:28:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:17 Set channel filter=0.000000e+000 result=40 05:28:17 Config A/D Result=40 05:28:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:17 Get A/D filter: -9.255963e+061 result=40 05:28:17 Get A/D value=-858993460 result=40 05:28:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:17 Parameters OK 05:28:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:17 Set A/D data flow result=40 05:28:17 Set A/D channel type result=40 05:28:17 Set A/D encoding result=40 05:28:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:17 Set channel filter=0.000000e+000 result=40 05:28:17 Config A/D Result=40 05:28:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:17 Get A/D filter: -9.255963e+061 result=40 05:28:17 Get A/D value=-858993460 result=40 05:28:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:17 Aux= 05:28:17 Message to Camera, serial 77452 queued 05:28:25 Received message from Master: op=Shutter serial=77462 05:28:25 Shutter LASER close 05:28:25 Received message from Master: op=PointingHead serial=77466 05:28:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:28:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:28:26 Point started: ret=0 05:28:26 point_skyscan result=0 05:28:27 Check angles 05:28:27 SkyScan query 05:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 05:28:27 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 05:28:27 Check angles 05:28:27 SkyScan query 05:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.47<-20098 Statuses=0008 0009 05:28:28 Msec=750 True Az=112.995 Ze=-121.47 Az status=0008 Ze status=0009 05:28:28 Check angles 05:28:28 SkyScan query 05:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.515<-18701 Statuses=0008 0009 05:28:29 Msec=1500 True Az=112.995 Ze=-100.515 Az status=0008 Ze status=0009 05:28:29 Check angles 05:28:29 SkyScan query 05:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.545<-17303 Statuses=0008 0009 05:28:29 Msec=2250 True Az=112.995 Ze=-79.545 Az status=0008 Ze status=0009 05:28:30 Check angles 05:28:30 SkyScan query 05:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.59<-15906 Statuses=0008 0009 05:28:30 Msec=3000 True Az=112.995 Ze=-58.59 Az status=0008 Ze status=0009 05:28:30 Check angles 05:28:30 SkyScan query 05:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.65<-14510 Statuses=0008 0009 05:28:31 Msec=3750 True Az=112.995 Ze=-37.65 Az status=0008 Ze status=0009 05:28:31 Check angles 05:28:31 SkyScan query 05:28:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.695<-13113 Statuses=0008 0009 05:28:32 Msec=4500 True Az=112.995 Ze=-16.695 Az status=0008 Ze status=0009 05:28:32 Check angles 05:28:32 SkyScan query 05:28:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.23<-11718 Statuses=0008 0009 05:28:32 Msec=5250 True Az=112.995 Ze=4.23 Az status=0008 Ze status=0009 05:28:33 Check angles 05:28:33 SkyScan query 05:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:28:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:28:33 Message to Master queued w/err=0: serial=77466 error=0 05:28:38 Received message from Master: op=Filter serial=77467 05:28:38 Color wheel filter change from 0 to 0 05:28:38 FLIGetFilterPos err=0 currentPosition=0 05:28:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:38 Filter is already there-color wheel unchanged 05:28:38 Received message from Master: op=Shutter serial=77468 05:28:38 Shutter LASER close 05:28:38 Received message from Camera: op=State serial=77470 05:28:38 GetSingleValue result=40 Value=cccccccc 05:28:38 SkyScan query 05:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:28:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:39 Parameters OK 05:28:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:39 Set A/D data flow result=40 05:28:39 Set A/D channel type result=40 05:28:39 Set A/D encoding result=40 05:28:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:39 Set channel filter=0.000000e+000 result=40 05:28:39 Config A/D Result=40 05:28:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:39 Get A/D filter: -9.255963e+061 result=40 05:28:39 Get A/D value=-858993460 result=40 05:28:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:39 Parameters OK 05:28:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:39 Set A/D data flow result=40 05:28:39 Set A/D channel type result=40 05:28:39 Set A/D encoding result=40 05:28:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:39 Set channel filter=0.000000e+000 result=40 05:28:39 Config A/D Result=40 05:28:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:39 Get A/D filter: -9.255963e+061 result=40 05:28:39 Get A/D value=-858993460 result=40 05:28:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:39 Aux= 05:28:39 Message to Camera, serial 77470 queued 05:29:16 Received message from Master: op=PointingHead serial=77483 05:29:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:29:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:29:16 Point started: ret=0 05:29:16 point_skyscan result=0 05:29:17 Check angles 05:29:17 SkyScan query 05:29:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:29:18 Message to Master queued w/err=0: serial=77483 error=0 05:29:23 Received message from Master: op=Filter serial=77484 05:29:23 Color wheel filter change from 0 to 0 05:29:23 FLIGetFilterPos err=0 currentPosition=0 05:29:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:23 Filter is already there-color wheel unchanged 05:29:23 Received message from Master: op=Shutter serial=77485 05:29:23 Shutter LASER close 05:29:23 Received message from Camera: op=State serial=77487 05:29:23 GetSingleValue result=40 Value=cccccccc 05:29:23 SkyScan query 05:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:23 Parameters OK 05:29:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:23 Set A/D data flow result=40 05:29:23 Set A/D channel type result=40 05:29:23 Set A/D encoding result=40 05:29:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:23 Set channel filter=0.000000e+000 result=40 05:29:23 Config A/D Result=40 05:29:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:23 Get A/D filter: -9.255963e+061 result=40 05:29:23 Get A/D value=-858993460 result=40 05:29:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:23 Parameters OK 05:29:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:23 Set A/D data flow result=40 05:29:23 Set A/D channel type result=40 05:29:23 Set A/D encoding result=40 05:29:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:23 Set channel filter=0.000000e+000 result=40 05:29:23 Config A/D Result=40 05:29:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:23 Get A/D filter: -9.255963e+061 result=40 05:29:23 Get A/D value=-858993460 result=40 05:29:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:23 Aux= 05:29:23 Message to Camera, serial 77487 queued 05:30:00 Received message from Master: op=PointingHead serial=77500 05:30:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:30:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:30:01 Point started: ret=0 05:30:01 point_skyscan result=0 05:30:01 Check angles 05:30:01 SkyScan query 05:30:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:30:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:30:02 Message to Master queued w/err=0: serial=77500 error=0 05:30:07 Received message from Master: op=Filter serial=77501 05:30:07 Color wheel filter change from 0 to 0 05:30:07 FLIGetFilterPos err=0 currentPosition=0 05:30:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:07 Filter is already there-color wheel unchanged 05:30:07 Received message from Master: op=Shutter serial=77502 05:30:07 Shutter LASER close 05:30:07 Received message from Camera: op=State serial=77504 05:30:07 GetSingleValue result=40 Value=cccccccc 05:30:07 SkyScan query 05:30:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:30:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:08 Parameters OK 05:30:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:08 Set A/D data flow result=40 05:30:08 Set A/D channel type result=40 05:30:08 Set A/D encoding result=40 05:30:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:08 Set channel filter=0.000000e+000 result=40 05:30:08 Config A/D Result=40 05:30:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:08 Get A/D filter: -9.255963e+061 result=40 05:30:08 Get A/D value=-858993460 result=40 05:30:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:08 Parameters OK 05:30:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:08 Set A/D data flow result=40 05:30:08 Set A/D channel type result=40 05:30:08 Set A/D encoding result=40 05:30:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:08 Set channel filter=0.000000e+000 result=40 05:30:08 Config A/D Result=40 05:30:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:08 Get A/D filter: -9.255963e+061 result=40 05:30:08 Get A/D value=-858993460 result=40 05:30:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:08 Aux= 05:30:08 Message to Camera, serial 77504 queued 05:30:45 Received message from Master: op=PointingHead serial=77517 05:30:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:30:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:30:45 Point started: ret=0 05:30:45 point_skyscan result=0 05:30:46 Check angles 05:30:46 SkyScan query 05:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:30:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:30:46 Message to Master queued w/err=0: serial=77517 error=0 05:30:51 Received message from Master: op=Filter serial=77518 05:30:51 Color wheel filter change from 0 to 0 05:30:51 FLIGetFilterPos err=0 currentPosition=0 05:30:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:51 Filter is already there-color wheel unchanged 05:30:51 Received message from Master: op=Shutter serial=77519 05:30:51 Shutter LASER close 05:30:51 Received message from Camera: op=State serial=77521 05:30:51 GetSingleValue result=40 Value=cccccccc 05:30:51 SkyScan query 05:30:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:30:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:52 Parameters OK 05:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:52 Set A/D data flow result=40 05:30:52 Set A/D channel type result=40 05:30:52 Set A/D encoding result=40 05:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:52 Set channel filter=0.000000e+000 result=40 05:30:52 Config A/D Result=40 05:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:52 Get A/D filter: -9.255963e+061 result=40 05:30:52 Get A/D value=-858993460 result=40 05:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:52 Parameters OK 05:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:52 Set A/D data flow result=40 05:30:52 Set A/D channel type result=40 05:30:52 Set A/D encoding result=40 05:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:52 Set channel filter=0.000000e+000 result=40 05:30:52 Config A/D Result=40 05:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:52 Get A/D filter: -9.255963e+061 result=40 05:30:52 Get A/D value=-858993460 result=40 05:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:52 Aux= 05:30:52 Message to Camera, serial 77521 queued 05:31:29 Received message from Master: op=PointingHead serial=77534 05:31:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:31:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:31:29 Point started: ret=0 05:31:29 point_skyscan result=0 05:31:30 Check angles 05:31:30 SkyScan query 05:31:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 05:31:31 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 05:31:31 Check angles 05:31:31 SkyScan query 05:31:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.325<-14955 Statuses=0008 0009 05:31:31 Msec=750 True Az=112.995 Ze=-44.325 Az status=0008 Ze status=0009 05:31:31 Check angles 05:31:31 SkyScan query 05:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 05:31:32 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 05:31:32 Check angles 05:31:32 SkyScan query 05:31:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.235<-17749 Statuses=0008 0009 05:31:33 Msec=2250 True Az=112.995 Ze=-86.235 Az status=0008 Ze status=0009 05:31:33 Check angles 05:31:33 SkyScan query 05:31:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.19<-19146 Statuses=0008 0009 05:31:34 Msec=3000 True Az=112.995 Ze=-107.19 Az status=0008 Ze status=0009 05:31:34 Check angles 05:31:34 SkyScan query 05:31:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.145<-20543 Statuses=0008 0009 05:31:34 Msec=3750 True Az=112.995 Ze=-128.145 Az status=0008 Ze status=0009 05:31:34 Check angles 05:31:34 SkyScan query 05:31:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.1<-21940 Statuses=0008 0009 05:31:35 Msec=4500 True Az=112.995 Ze=-149.1 Az status=0008 Ze status=0009 05:31:35 Check angles 05:31:35 SkyScan query 05:31:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.04<-23336 Statuses=0008 0009 05:31:36 Msec=5250 True Az=112.995 Ze=-170.04 Az status=0008 Ze status=0009 05:31:36 Check angles 05:31:36 SkyScan query 05:31:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:31:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:31:37 Message to Master queued w/err=0: serial=77534 error=0 05:31:42 Received message from Master: op=Filter serial=77535 05:31:42 Color wheel filter change from 0 to 0 05:31:42 FLIGetFilterPos err=0 currentPosition=0 05:31:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:42 Filter is already there-color wheel unchanged 05:31:42 Received message from Master: op=Shutter serial=77536 05:31:42 Shutter LASER open 05:31:42 Received message from Camera: op=State serial=77538 05:31:42 GetSingleValue result=40 Value=cccccccc 05:31:42 SkyScan query 05:31:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:31:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:42 Parameters OK 05:31:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:42 Set A/D data flow result=40 05:31:42 Set A/D channel type result=40 05:31:42 Set A/D encoding result=40 05:31:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:42 Set channel filter=0.000000e+000 result=40 05:31:42 Config A/D Result=40 05:31:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:42 Get A/D filter: -9.255963e+061 result=40 05:31:42 Get A/D value=-858993460 result=40 05:31:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:42 Parameters OK 05:31:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:42 Set A/D data flow result=40 05:31:42 Set A/D channel type result=40 05:31:42 Set A/D encoding result=40 05:31:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:42 Set channel filter=0.000000e+000 result=40 05:31:42 Config A/D Result=40 05:31:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:42 Get A/D filter: -9.255963e+061 result=40 05:31:42 Get A/D value=-858993460 result=40 05:31:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:42 Aux= 05:31:42 Message to Camera, serial 77538 queued 05:31:51 Received message from Master: op=Shutter serial=77548 05:31:51 Shutter LASER close 05:31:52 Received message from Master: op=PointingHead serial=77552 05:31:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:31:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:31:52 Point started: ret=0 05:31:52 point_skyscan result=0 05:31:53 Check angles 05:31:53 SkyScan query 05:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 05:31:53 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 05:31:53 Check angles 05:31:53 SkyScan query 05:31:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 05:31:54 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 05:31:54 Check angles 05:31:54 SkyScan query 05:31:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 05:31:55 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 05:31:55 Check angles 05:31:55 SkyScan query 05:31:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 05:31:55 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 05:31:56 Check angles 05:31:56 SkyScan query 05:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.52<-15968 Statuses=0008 0009 05:31:56 Msec=3000 True Az=112.995 Ze=-59.52 Az status=0008 Ze status=0009 05:31:56 Check angles 05:31:56 SkyScan query 05:31:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.55<-14570 Statuses=0008 0009 05:31:57 Msec=3750 True Az=112.995 Ze=-38.55 Az status=0008 Ze status=0009 05:31:57 Check angles 05:31:57 SkyScan query 05:31:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.61<-13174 Statuses=0008 0009 05:31:58 Msec=4500 True Az=112.995 Ze=-17.61 Az status=0008 Ze status=0009 05:31:58 Check angles 05:31:58 SkyScan query 05:31:58 SkyScan query done: ret=0 az=112.995<-7533 ze=3.345<-11777 Statuses=0008 0009 05:31:58 Msec=5250 True Az=112.995 Ze=3.345 Az status=0008 Ze status=0009 05:31:59 Check angles 05:31:59 SkyScan query 05:31:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:31:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:31:59 Message to Master queued w/err=0: serial=77552 error=0 05:32:04 Received message from Master: op=Filter serial=77553 05:32:04 Color wheel filter change from 0 to 0 05:32:04 FLIGetFilterPos err=0 currentPosition=0 05:32:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:04 Filter is already there-color wheel unchanged 05:32:04 Received message from Master: op=Shutter serial=77554 05:32:04 Shutter LASER close 05:32:05 Received message from Camera: op=State serial=77556 05:32:05 GetSingleValue result=40 Value=cccccccc 05:32:05 SkyScan query 05:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:32:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:05 Parameters OK 05:32:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:05 Set A/D data flow result=40 05:32:05 Set A/D channel type result=40 05:32:05 Set A/D encoding result=40 05:32:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:05 Set channel filter=0.000000e+000 result=40 05:32:05 Config A/D Result=40 05:32:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:05 Get A/D filter: -9.255963e+061 result=40 05:32:05 Get A/D value=-858993460 result=40 05:32:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:05 Parameters OK 05:32:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:05 Set A/D data flow result=40 05:32:05 Set A/D channel type result=40 05:32:05 Set A/D encoding result=40 05:32:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:05 Set channel filter=0.000000e+000 result=40 05:32:05 Config A/D Result=40 05:32:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:05 Get A/D filter: -9.255963e+061 result=40 05:32:05 Get A/D value=-858993460 result=40 05:32:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:05 Aux= 05:32:05 Message to Camera, serial 77556 queued 05:32:42 Received message from Master: op=PointingHead serial=77569 05:32:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:32:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:32:42 Point started: ret=0 05:32:42 point_skyscan result=0 05:32:43 Check angles 05:32:43 SkyScan query 05:32:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:32:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:32:44 Message to Master queued w/err=0: serial=77569 error=0 05:32:49 Received message from Master: op=Filter serial=77570 05:32:49 Color wheel filter change from 0 to 0 05:32:49 FLIGetFilterPos err=0 currentPosition=0 05:32:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:49 Filter is already there-color wheel unchanged 05:32:49 Received message from Master: op=Shutter serial=77571 05:32:49 Shutter LASER close 05:32:49 Received message from Camera: op=State serial=77573 05:32:49 GetSingleValue result=40 Value=cccccccc 05:32:49 SkyScan query 05:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:32:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:49 Parameters OK 05:32:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:49 Set A/D data flow result=40 05:32:49 Set A/D channel type result=40 05:32:49 Set A/D encoding result=40 05:32:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:49 Set channel filter=0.000000e+000 result=40 05:32:49 Config A/D Result=40 05:32:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:49 Get A/D filter: -9.255963e+061 result=40 05:32:49 Get A/D value=-858993460 result=40 05:32:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:49 Parameters OK 05:32:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:49 Set A/D data flow result=40 05:32:49 Set A/D channel type result=40 05:32:49 Set A/D encoding result=40 05:32:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:49 Set channel filter=0.000000e+000 result=40 05:32:49 Config A/D Result=40 05:32:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:49 Get A/D filter: -9.255963e+061 result=40 05:32:49 Get A/D value=-858993460 result=40 05:32:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:49 Aux= 05:32:49 Message to Camera, serial 77573 queued 05:33:26 Received message from Master: op=PointingHead serial=77586 05:33:26 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:33:26 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:33:27 Point started: ret=0 05:33:27 point_skyscan result=0 05:33:27 Check angles 05:33:27 SkyScan query 05:33:28 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 05:33:28 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 05:33:28 Check angles 05:33:28 SkyScan query 05:33:29 SkyScan query done: ret=0 az=153.645<-10243 ze=-6.495<-12433 Statuses=0009 0008 05:33:29 Msec=750 True Az=153.645 Ze=-6.495 Az status=0009 Ze status=0008 05:33:29 Check angles 05:33:29 SkyScan query 05:33:29 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 05:33:29 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 05:33:30 Check angles 05:33:30 SkyScan query 05:33:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:33:30 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:33:30 Message to Master queued w/err=0: serial=77586 error=0 05:33:35 Received message from Master: op=Filter serial=77587 05:33:35 Color wheel filter change from 0 to 0 05:33:35 FLIGetFilterPos err=0 currentPosition=0 05:33:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:35 Filter is already there-color wheel unchanged 05:33:35 Received message from Master: op=Shutter serial=77588 05:33:35 Shutter LASER close 05:33:35 Received message from Camera: op=State serial=77590 05:33:35 GetSingleValue result=40 Value=cccccccc 05:33:35 SkyScan query 05:33:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:33:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:36 Parameters OK 05:33:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:36 Set A/D data flow result=40 05:33:36 Set A/D channel type result=40 05:33:36 Set A/D encoding result=40 05:33:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:36 Set channel filter=0.000000e+000 result=40 05:33:36 Config A/D Result=40 05:33:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:36 Get A/D filter: -9.255963e+061 result=40 05:33:36 Get A/D value=-858993460 result=40 05:33:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:36 Parameters OK 05:33:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:36 Set A/D data flow result=40 05:33:36 Set A/D channel type result=40 05:33:36 Set A/D encoding result=40 05:33:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:36 Set channel filter=0.000000e+000 result=40 05:33:36 Config A/D Result=40 05:33:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:36 Get A/D filter: -9.255963e+061 result=40 05:33:36 Get A/D value=-858993460 result=40 05:33:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:36 Aux= 05:33:36 Message to Camera, serial 77590 queued 05:33:38 Received message from Master: op=Identify serial=77591 05:34:13 Received message from Master: op=PointingHead serial=77606 05:34:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:34:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:34:13 Point started: ret=0 05:34:13 point_skyscan result=0 05:34:14 Check angles 05:34:14 SkyScan query 05:34:14 SkyScan query done: ret=0 az=152.685<-10179 ze=6.51<-11566 Statuses=0009 0008 05:34:14 Msec=0 True Az=152.685 Ze=6.51 Az status=0009 Ze status=0008 [UTC 2019-3-3 05:34:15] 05:34:15 Check angles 05:34:15 SkyScan query 05:34:15 SkyScan query done: ret=0 az=133.77<-8918 ze=6.495<-11567 Statuses=0009 0008 05:34:15 Msec=750 True Az=133.77 Ze=6.495 Az status=0009 Ze status=0008 05:34:15 Check angles 05:34:15 SkyScan query 05:34:16 SkyScan query done: ret=0 az=117.405<-7827 ze=6.495<-11567 Statuses=0009 0008 05:34:16 Msec=1500 True Az=117.405 Ze=6.495 Az status=0009 Ze status=0008 05:34:16 Check angles 05:34:16 SkyScan query 05:34:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:34:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:34:17 Message to Master queued w/err=0: serial=77606 error=0 05:34:22 Received message from Master: op=Filter serial=77607 05:34:22 Color wheel filter change from 0 to 0 05:34:22 FLIGetFilterPos err=0 currentPosition=0 05:34:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:22 Filter is already there-color wheel unchanged 05:34:22 Received message from Master: op=Shutter serial=77608 05:34:22 Shutter LASER close 05:34:22 Received message from Camera: op=State serial=77610 05:34:22 GetSingleValue result=40 Value=cccccccc 05:34:22 SkyScan query 05:34:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:34:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:23 Parameters OK 05:34:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:23 Set A/D data flow result=40 05:34:23 Set A/D channel type result=40 05:34:23 Set A/D encoding result=40 05:34:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:23 Set channel filter=0.000000e+000 result=40 05:34:23 Config A/D Result=40 05:34:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:23 Get A/D filter: -9.255963e+061 result=40 05:34:23 Get A/D value=-858993460 result=40 05:34:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:23 Parameters OK 05:34:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:23 Set A/D data flow result=40 05:34:23 Set A/D channel type result=40 05:34:23 Set A/D encoding result=40 05:34:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:23 Set channel filter=0.000000e+000 result=40 05:34:23 Config A/D Result=40 05:34:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:23 Get A/D filter: -9.255963e+061 result=40 05:34:23 Get A/D value=-858993460 result=40 05:34:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:23 Aux= 05:34:23 Message to Camera, serial 77610 queued 05:34:58 Received message from Master: op=PointingHead serial=77622 05:34:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:34:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:34:59 Point started: ret=0 05:34:59 point_skyscan result=0 05:35:00 Check angles 05:35:00 SkyScan query 05:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 05:35:00 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 05:35:00 Check angles 05:35:00 SkyScan query 05:35:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 05:35:01 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 05:35:01 Check angles 05:35:01 SkyScan query 05:35:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.925<-16395 Statuses=0008 0009 05:35:02 Msec=1500 True Az=112.995 Ze=-65.925 Az status=0008 Ze status=0009 05:35:02 Check angles 05:35:02 SkyScan query 05:35:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.865<-17791 Statuses=0008 0009 05:35:02 Msec=2250 True Az=112.995 Ze=-86.865 Az status=0008 Ze status=0009 05:35:03 Check angles 05:35:03 SkyScan query 05:35:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.835<-19189 Statuses=0008 0009 05:35:03 Msec=3000 True Az=112.995 Ze=-107.835 Az status=0008 Ze status=0009 05:35:03 Check angles 05:35:03 SkyScan query 05:35:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 05:35:04 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 05:35:04 Check angles 05:35:04 SkyScan query 05:35:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.73<-21982 Statuses=0008 0009 05:35:05 Msec=4500 True Az=112.995 Ze=-149.73 Az status=0008 Ze status=0009 05:35:05 Check angles 05:35:05 SkyScan query 05:35:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.655<-23377 Statuses=0008 0009 05:35:05 Msec=5250 True Az=112.995 Ze=-170.655 Az status=0008 Ze status=0009 05:35:06 Check angles 05:35:06 SkyScan query 05:35:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:35:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:35:06 Message to Master queued w/err=0: serial=77622 error=0 05:35:11 Received message from Master: op=Filter serial=77623 05:35:11 Color wheel filter change from 0 to 0 05:35:11 FLIGetFilterPos err=0 currentPosition=0 05:35:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:11 Filter is already there-color wheel unchanged 05:35:11 Received message from Master: op=Shutter serial=77624 05:35:11 Shutter LASER open 05:35:12 Received message from Camera: op=State serial=77626 05:35:12 GetSingleValue result=40 Value=cccccccc 05:35:12 SkyScan query 05:35:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:35:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:12 Parameters OK 05:35:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:12 Set A/D data flow result=40 05:35:12 Set A/D channel type result=40 05:35:12 Set A/D encoding result=40 05:35:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:12 Set channel filter=0.000000e+000 result=40 05:35:12 Config A/D Result=40 05:35:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:12 Get A/D filter: -9.255963e+061 result=40 05:35:12 Get A/D value=-858993460 result=40 05:35:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:12 Parameters OK 05:35:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:12 Set A/D data flow result=40 05:35:12 Set A/D channel type result=40 05:35:12 Set A/D encoding result=40 05:35:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:12 Set channel filter=0.000000e+000 result=40 05:35:12 Config A/D Result=40 05:35:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:12 Get A/D filter: -9.255963e+061 result=40 05:35:12 Get A/D value=-858993460 result=40 05:35:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:12 Aux= 05:35:12 Message to Camera, serial 77626 queued 05:35:21 Received message from Master: op=Shutter serial=77636 05:35:21 Shutter LASER close 05:35:21 Received message from Master: op=PointingHead serial=77640 05:35:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:35:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:35:21 Point started: ret=0 05:35:21 point_skyscan result=0 05:35:22 Check angles 05:35:22 SkyScan query 05:35:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 05:35:23 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 05:35:23 Check angles 05:35:23 SkyScan query 05:35:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.5<-20100 Statuses=0008 0009 05:35:23 Msec=750 True Az=112.995 Ze=-121.5 Az status=0008 Ze status=0009 05:35:24 Check angles 05:35:24 SkyScan query 05:35:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 05:35:24 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 05:35:24 Check angles 05:35:24 SkyScan query 05:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 05:35:25 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 05:35:25 Check angles 05:35:25 SkyScan query 05:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.02<-15868 Statuses=0008 0009 05:35:26 Msec=3000 True Az=112.995 Ze=-58.02 Az status=0008 Ze status=0009 05:35:26 Check angles 05:35:26 SkyScan query 05:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.095<-14473 Statuses=0008 0009 05:35:26 Msec=3750 True Az=112.995 Ze=-37.095 Az status=0008 Ze status=0009 05:35:27 Check angles 05:35:27 SkyScan query 05:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.705<-13047 Statuses=0008 0009 05:35:27 Msec=4500 True Az=112.995 Ze=-15.705 Az status=0008 Ze status=0009 05:35:27 Check angles 05:35:27 SkyScan query 05:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=5.28<-11648 Statuses=0008 0009 05:35:28 Msec=5250 True Az=112.995 Ze=5.28 Az status=0008 Ze status=0009 05:35:28 Check angles 05:35:28 SkyScan query 05:35:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:35:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:35:29 Message to Master queued w/err=0: serial=77640 error=0 05:35:34 Received message from Master: op=Filter serial=77641 05:35:34 Color wheel filter change from 0 to 0 05:35:34 FLIGetFilterPos err=0 currentPosition=0 05:35:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:34 Filter is already there-color wheel unchanged 05:35:34 Received message from Master: op=Shutter serial=77642 05:35:34 Shutter LASER close 05:35:34 Received message from Camera: op=State serial=77644 05:35:34 GetSingleValue result=40 Value=cccccccc 05:35:34 SkyScan query 05:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:35:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:35 Parameters OK 05:35:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:35 Set A/D data flow result=40 05:35:35 Set A/D channel type result=40 05:35:35 Set A/D encoding result=40 05:35:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:35 Set channel filter=0.000000e+000 result=40 05:35:35 Config A/D Result=40 05:35:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:35 Get A/D filter: -9.255963e+061 result=40 05:35:35 Get A/D value=-858993460 result=40 05:35:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:35 Parameters OK 05:35:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:35 Set A/D data flow result=40 05:35:35 Set A/D channel type result=40 05:35:35 Set A/D encoding result=40 05:35:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:35 Set channel filter=0.000000e+000 result=40 05:35:35 Config A/D Result=40 05:35:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:35 Get A/D filter: -9.255963e+061 result=40 05:35:35 Get A/D value=-858993460 result=40 05:35:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:35 Aux= 05:35:35 Message to Camera, serial 77644 queued 05:36:11 Received message from Master: op=PointingHead serial=77657 05:36:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:36:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:36:12 Point started: ret=0 05:36:12 point_skyscan result=0 05:36:13 Check angles 05:36:13 SkyScan query 05:36:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:36:13 Message to Master queued w/err=0: serial=77657 error=0 05:36:18 Received message from Master: op=Filter serial=77658 05:36:18 Color wheel filter change from 0 to 0 05:36:18 FLIGetFilterPos err=0 currentPosition=0 05:36:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:18 Filter is already there-color wheel unchanged 05:36:18 Received message from Master: op=Shutter serial=77659 05:36:18 Shutter LASER close 05:36:18 Received message from Camera: op=State serial=77661 05:36:18 GetSingleValue result=40 Value=cccccccc 05:36:18 SkyScan query 05:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:19 Parameters OK 05:36:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:19 Set A/D data flow result=40 05:36:19 Set A/D channel type result=40 05:36:19 Set A/D encoding result=40 05:36:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:19 Set channel filter=0.000000e+000 result=40 05:36:19 Config A/D Result=40 05:36:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:19 Get A/D filter: -9.255963e+061 result=40 05:36:19 Get A/D value=-858993460 result=40 05:36:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:19 Parameters OK 05:36:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:19 Set A/D data flow result=40 05:36:19 Set A/D channel type result=40 05:36:19 Set A/D encoding result=40 05:36:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:19 Set channel filter=0.000000e+000 result=40 05:36:19 Config A/D Result=40 05:36:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:19 Get A/D filter: -9.255963e+061 result=40 05:36:19 Get A/D value=-858993460 result=40 05:36:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:19 Aux= 05:36:19 Message to Camera, serial 77661 queued 05:36:56 Received message from Master: op=PointingHead serial=77674 05:36:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:36:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:36:56 Point started: ret=0 05:36:56 point_skyscan result=0 05:36:57 Check angles 05:36:57 SkyScan query 05:36:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:36:57 Message to Master queued w/err=0: serial=77674 error=0 05:37:02 Received message from Master: op=Filter serial=77675 05:37:02 Color wheel filter change from 0 to 0 05:37:02 FLIGetFilterPos err=0 currentPosition=0 05:37:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:02 Filter is already there-color wheel unchanged 05:37:03 Received message from Master: op=Shutter serial=77676 05:37:03 Shutter LASER close 05:37:03 Received message from Camera: op=State serial=77678 05:37:03 GetSingleValue result=40 Value=cccccccc 05:37:03 SkyScan query 05:37:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:37:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:03 Parameters OK 05:37:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:03 Set A/D data flow result=40 05:37:03 Set A/D channel type result=40 05:37:03 Set A/D encoding result=40 05:37:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:03 Set channel filter=0.000000e+000 result=40 05:37:03 Config A/D Result=40 05:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:03 Get A/D filter: -9.255963e+061 result=40 05:37:03 Get A/D value=-858993460 result=40 05:37:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:03 Parameters OK 05:37:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:03 Set A/D data flow result=40 05:37:03 Set A/D channel type result=40 05:37:03 Set A/D encoding result=40 05:37:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:03 Set channel filter=0.000000e+000 result=40 05:37:03 Config A/D Result=40 05:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:03 Get A/D filter: -9.255963e+061 result=40 05:37:03 Get A/D value=-858993460 result=40 05:37:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:03 Aux= 05:37:03 Message to Camera, serial 77678 queued 05:37:40 Received message from Master: op=PointingHead serial=77691 05:37:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:37:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:37:40 Point started: ret=0 05:37:40 point_skyscan result=0 05:37:41 Check angles 05:37:41 SkyScan query 05:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:37:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:37:42 Message to Master queued w/err=0: serial=77691 error=0 05:37:47 Received message from Master: op=Filter serial=77692 05:37:47 Color wheel filter change from 0 to 0 05:37:47 FLIGetFilterPos err=0 currentPosition=0 05:37:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:47 Filter is already there-color wheel unchanged 05:37:47 Received message from Master: op=Shutter serial=77693 05:37:47 Shutter LASER close 05:37:47 Received message from Camera: op=State serial=77695 05:37:47 GetSingleValue result=40 Value=cccccccc 05:37:47 SkyScan query 05:37:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:37:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:47 Parameters OK 05:37:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:47 Set A/D data flow result=40 05:37:47 Set A/D channel type result=40 05:37:47 Set A/D encoding result=40 05:37:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:47 Set channel filter=0.000000e+000 result=40 05:37:47 Config A/D Result=40 05:37:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:47 Get A/D filter: -9.255963e+061 result=40 05:37:47 Get A/D value=-858993460 result=40 05:37:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:47 Parameters OK 05:37:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:47 Set A/D data flow result=40 05:37:47 Set A/D channel type result=40 05:37:47 Set A/D encoding result=40 05:37:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:47 Set channel filter=0.000000e+000 result=40 05:37:47 Config A/D Result=40 05:37:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:47 Get A/D filter: -9.255963e+061 result=40 05:37:47 Get A/D value=-858993460 result=40 05:37:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:47 Aux= 05:37:47 Message to Camera, serial 77695 queued 05:38:24 Received message from Master: op=PointingHead serial=77708 05:38:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:38:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:38:25 Point started: ret=0 05:38:25 point_skyscan result=0 05:38:25 Check angles 05:38:25 SkyScan query 05:38:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 05:38:26 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 05:38:26 Check angles 05:38:26 SkyScan query 05:38:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.955<-14997 Statuses=0008 0009 05:38:27 Msec=750 True Az=112.995 Ze=-44.955 Az status=0008 Ze status=0009 05:38:27 Check angles 05:38:27 SkyScan query 05:38:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.895<-16393 Statuses=0008 0009 05:38:27 Msec=1500 True Az=112.995 Ze=-65.895 Az status=0008 Ze status=0009 05:38:28 Check angles 05:38:28 SkyScan query 05:38:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.835<-17789 Statuses=0008 0009 05:38:28 Msec=2250 True Az=112.995 Ze=-86.835 Az status=0008 Ze status=0009 05:38:28 Check angles 05:38:28 SkyScan query 05:38:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 05:38:29 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 05:38:29 Check angles 05:38:29 SkyScan query 05:38:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.195<-20613 Statuses=0008 0009 05:38:30 Msec=3750 True Az=112.995 Ze=-129.195 Az status=0008 Ze status=0009 05:38:30 Check angles 05:38:30 SkyScan query 05:38:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.57<-22038 Statuses=0008 0009 05:38:31 Msec=4500 True Az=112.995 Ze=-150.57 Az status=0008 Ze status=0009 05:38:31 Check angles 05:38:31 SkyScan query 05:38:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.615<-23441 Statuses=0008 0009 05:38:31 Msec=5250 True Az=112.995 Ze=-171.615 Az status=0008 Ze status=0009 05:38:31 Check angles 05:38:31 SkyScan query 05:38:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:38:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:38:32 Message to Master queued w/err=0: serial=77708 error=0 05:38:37 Received message from Master: op=Filter serial=77709 05:38:37 Color wheel filter change from 0 to 0 05:38:37 FLIGetFilterPos err=0 currentPosition=0 05:38:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:37 Filter is already there-color wheel unchanged 05:38:37 Received message from Master: op=Shutter serial=77710 05:38:37 Shutter LASER open 05:38:37 Received message from Camera: op=State serial=77712 05:38:37 GetSingleValue result=40 Value=cccccccc 05:38:37 SkyScan query 05:38:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:38:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:38 Parameters OK 05:38:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:38 Set A/D data flow result=40 05:38:38 Set A/D channel type result=40 05:38:38 Set A/D encoding result=40 05:38:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:38 Set channel filter=0.000000e+000 result=40 05:38:38 Config A/D Result=40 05:38:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:38 Get A/D filter: -9.255963e+061 result=40 05:38:38 Get A/D value=-858993460 result=40 05:38:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:38 Parameters OK 05:38:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:38 Set A/D data flow result=40 05:38:38 Set A/D channel type result=40 05:38:38 Set A/D encoding result=40 05:38:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:38 Set channel filter=0.000000e+000 result=40 05:38:38 Config A/D Result=40 05:38:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:38 Get A/D filter: -9.255963e+061 result=40 05:38:38 Get A/D value=-858993460 result=40 05:38:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:38 Aux= 05:38:38 Message to Camera, serial 77712 queued 05:38:45 Received message from Master: op=Shutter serial=77721 05:38:45 Shutter LASER close 05:38:46 Received message from Master: op=PointingHead serial=77725 05:38:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:38:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:38:46 Point started: ret=0 05:38:46 point_skyscan result=0 05:38:47 Check angles 05:38:47 SkyScan query 05:38:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.565<-21571 Statuses=0008 0009 05:38:48 Msec=0 True Az=112.995 Ze=-143.565 Az status=0008 Ze status=0009 05:38:48 Check angles 05:38:48 SkyScan query 05:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 05:38:49 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 05:38:49 Check angles 05:38:49 SkyScan query 05:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 05:38:49 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 05:38:49 Check angles 05:38:49 SkyScan query 05:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.25<-17350 Statuses=0008 0009 05:38:50 Msec=2250 True Az=112.995 Ze=-80.25 Az status=0008 Ze status=0009 05:38:50 Check angles 05:38:50 SkyScan query 05:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.28<-15952 Statuses=0008 0009 05:38:51 Msec=3000 True Az=112.995 Ze=-59.28 Az status=0008 Ze status=0009 05:38:51 Check angles 05:38:51 SkyScan query 05:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.295<-14553 Statuses=0008 0009 05:38:52 Msec=3750 True Az=112.995 Ze=-38.295 Az status=0008 Ze status=0009 05:38:52 Check angles 05:38:52 SkyScan query 05:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.37<-13158 Statuses=0008 0009 05:38:52 Msec=4500 True Az=112.995 Ze=-17.37 Az status=0008 Ze status=0009 05:38:52 Check angles 05:38:52 SkyScan query 05:38:53 SkyScan query done: ret=0 az=112.995<-7533 ze=3.585<-11761 Statuses=0008 0009 05:38:53 Msec=5250 True Az=112.995 Ze=3.585 Az status=0008 Ze status=0009 05:38:53 Check angles 05:38:53 SkyScan query 05:38:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:38:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:38:54 Message to Master queued w/err=0: serial=77725 error=0 05:38:59 Received message from Master: op=Filter serial=77726 05:38:59 Color wheel filter change from 0 to 0 05:38:59 FLIGetFilterPos err=0 currentPosition=0 05:38:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:59 Filter is already there-color wheel unchanged 05:38:59 Received message from Master: op=Shutter serial=77727 05:38:59 Shutter LASER close 05:38:59 Received message from Camera: op=State serial=77729 05:38:59 GetSingleValue result=40 Value=cccccccc 05:38:59 SkyScan query 05:39:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:39:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:00 Parameters OK 05:39:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:00 Set A/D data flow result=40 05:39:00 Set A/D channel type result=40 05:39:00 Set A/D encoding result=40 05:39:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:00 Set channel filter=0.000000e+000 result=40 05:39:00 Config A/D Result=40 05:39:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:00 Get A/D filter: -9.255963e+061 result=40 05:39:00 Get A/D value=-858993460 result=40 05:39:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:00 Parameters OK 05:39:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:00 Set A/D data flow result=40 05:39:00 Set A/D channel type result=40 05:39:00 Set A/D encoding result=40 05:39:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:00 Set channel filter=0.000000e+000 result=40 05:39:00 Config A/D Result=40 05:39:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:00 Get A/D filter: -9.255963e+061 result=40 05:39:00 Get A/D value=-858993460 result=40 05:39:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:00 Aux= 05:39:00 Message to Camera, serial 77729 queued 05:39:37 Received message from Master: op=PointingHead serial=77742 05:39:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:39:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:39:37 Point started: ret=0 05:39:37 point_skyscan result=0 05:39:38 Check angles 05:39:38 SkyScan query 05:39:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:39:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:39:38 Message to Master queued w/err=0: serial=77742 error=0 05:39:43 Received message from Master: op=Filter serial=77743 05:39:43 Color wheel filter change from 0 to 0 05:39:43 FLIGetFilterPos err=0 currentPosition=0 05:39:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:43 Filter is already there-color wheel unchanged 05:39:43 Received message from Master: op=Shutter serial=77744 05:39:43 Shutter LASER close 05:39:43 Received message from Camera: op=State serial=77746 05:39:43 GetSingleValue result=40 Value=cccccccc 05:39:43 SkyScan query 05:39:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:39:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:44 Parameters OK 05:39:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:44 Set A/D data flow result=40 05:39:44 Set A/D channel type result=40 05:39:44 Set A/D encoding result=40 05:39:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:44 Set channel filter=0.000000e+000 result=40 05:39:44 Config A/D Result=40 05:39:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:44 Get A/D filter: -9.255963e+061 result=40 05:39:44 Get A/D value=-858993460 result=40 05:39:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:44 Parameters OK 05:39:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:44 Set A/D data flow result=40 05:39:44 Set A/D channel type result=40 05:39:44 Set A/D encoding result=40 05:39:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:44 Set channel filter=0.000000e+000 result=40 05:39:44 Config A/D Result=40 05:39:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:44 Get A/D filter: -9.255963e+061 result=40 05:39:44 Get A/D value=-858993460 result=40 05:39:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:44 Aux= 05:39:44 Message to Camera, serial 77746 queued 05:40:20 Received message from Master: op=PointingHead serial=77758 05:40:20 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:40:20 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:40:20 Point started: ret=0 05:40:20 point_skyscan result=0 05:40:21 Check angles 05:40:21 SkyScan query 05:40:22 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 05:40:22 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 05:40:22 Check angles 05:40:22 SkyScan query 05:40:22 SkyScan query done: ret=0 az=154.155<-10277 ze=-6.495<-12433 Statuses=0009 0008 05:40:22 Msec=750 True Az=154.155 Ze=-6.495 Az status=0009 Ze status=0008 05:40:22 Check angles 05:40:22 SkyScan query 05:40:23 SkyScan query done: ret=0 az=171.735<-11449 ze=-6.495<-12433 Statuses=0009 0008 05:40:23 Msec=1500 True Az=171.735 Ze=-6.495 Az status=0009 Ze status=0008 05:40:23 Check angles 05:40:23 SkyScan query 05:40:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:40:24 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:40:24 Message to Master queued w/err=0: serial=77758 error=0 05:40:29 Received message from Master: op=Filter serial=77759 05:40:29 Color wheel filter change from 0 to 0 05:40:29 FLIGetFilterPos err=0 currentPosition=0 05:40:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:29 Filter is already there-color wheel unchanged 05:40:29 Received message from Master: op=Shutter serial=77760 05:40:29 Shutter LASER close 05:40:29 Received message from Camera: op=State serial=77762 05:40:29 GetSingleValue result=40 Value=cccccccc 05:40:29 SkyScan query 05:40:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:40:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:30 Parameters OK 05:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:30 Set A/D data flow result=40 05:40:30 Set A/D channel type result=40 05:40:30 Set A/D encoding result=40 05:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:30 Set channel filter=0.000000e+000 result=40 05:40:30 Config A/D Result=40 05:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:30 Get A/D filter: -9.255963e+061 result=40 05:40:30 Get A/D value=-858993460 result=40 05:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:30 Parameters OK 05:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:30 Set A/D data flow result=40 05:40:30 Set A/D channel type result=40 05:40:30 Set A/D encoding result=40 05:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:30 Set channel filter=0.000000e+000 result=40 05:40:30 Config A/D Result=40 05:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:30 Get A/D filter: -9.255963e+061 result=40 05:40:30 Get A/D value=-858993460 result=40 05:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:30 Aux= 05:40:30 Message to Camera, serial 77762 queued 05:41:06 Received message from Master: op=PointingHead serial=77775 05:41:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:41:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:41:07 Point started: ret=0 05:41:07 point_skyscan result=0 05:41:08 Check angles 05:41:08 SkyScan query 05:41:08 SkyScan query done: ret=0 az=152.565<-10171 ze=6.51<-11566 Statuses=0009 0008 05:41:08 Msec=0 True Az=152.565 Ze=6.51 Az status=0009 Ze status=0008 05:41:08 Check angles 05:41:08 SkyScan query 05:41:09 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 05:41:09 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 05:41:09 Check angles 05:41:09 SkyScan query 05:41:10 SkyScan query done: ret=0 az=117.285<-7819 ze=6.495<-11567 Statuses=0009 0008 05:41:10 Msec=1500 True Az=117.285 Ze=6.495 Az status=0009 Ze status=0008 05:41:10 Check angles 05:41:10 SkyScan query 05:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:41:10 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:41:10 Message to Master queued w/err=0: serial=77775 error=0 05:41:15 Received message from Master: op=Filter serial=77776 05:41:15 Color wheel filter change from 0 to 0 05:41:15 FLIGetFilterPos err=0 currentPosition=0 05:41:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:15 Filter is already there-color wheel unchanged 05:41:16 Received message from Master: op=Shutter serial=77777 05:41:16 Shutter LASER close 05:41:16 Received message from Camera: op=State serial=77779 05:41:16 GetSingleValue result=40 Value=cccccccc 05:41:16 SkyScan query 05:41:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:41:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:16 Parameters OK 05:41:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:16 Set A/D data flow result=40 05:41:16 Set A/D channel type result=40 05:41:16 Set A/D encoding result=40 05:41:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:16 Set channel filter=0.000000e+000 result=40 05:41:16 Config A/D Result=40 05:41:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:16 Get A/D filter: -9.255963e+061 result=40 05:41:16 Get A/D value=-858993460 result=40 05:41:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:16 Parameters OK 05:41:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:16 Set A/D data flow result=40 05:41:16 Set A/D channel type result=40 05:41:16 Set A/D encoding result=40 05:41:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:16 Set channel filter=0.000000e+000 result=40 05:41:16 Config A/D Result=40 05:41:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:16 Get A/D filter: -9.255963e+061 result=40 05:41:16 Get A/D value=-858993460 result=40 05:41:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:16 Aux= 05:41:16 Message to Camera, serial 77779 queued 05:41:53 Received message from Master: op=PointingHead serial=77792 05:41:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:41:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:41:53 Point started: ret=0 05:41:53 point_skyscan result=0 05:41:54 Check angles 05:41:54 SkyScan query 05:41:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 05:41:55 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 05:41:55 Check angles 05:41:55 SkyScan query 05:41:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.19<-14946 Statuses=0008 0009 05:41:55 Msec=750 True Az=112.995 Ze=-44.19 Az status=0008 Ze status=0009 05:41:56 Check angles 05:41:56 SkyScan query 05:41:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.13<-16342 Statuses=0008 0009 05:41:56 Msec=1500 True Az=112.995 Ze=-65.13 Az status=0008 Ze status=0009 05:41:56 Check angles 05:41:56 SkyScan query 05:41:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.1<-17740 Statuses=0008 0009 05:41:57 Msec=2250 True Az=112.995 Ze=-86.1 Az status=0008 Ze status=0009 05:41:57 Check angles 05:41:57 SkyScan query 05:41:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.04<-19136 Statuses=0008 0009 05:41:58 Msec=3000 True Az=112.995 Ze=-107.04 Az status=0008 Ze status=0009 05:41:58 Check angles 05:41:58 SkyScan query 05:41:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.995<-20533 Statuses=0008 0009 05:41:58 Msec=3750 True Az=112.995 Ze=-127.995 Az status=0008 Ze status=0009 05:41:59 Check angles 05:41:59 SkyScan query 05:41:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.95<-21930 Statuses=0008 0009 05:41:59 Msec=4500 True Az=112.995 Ze=-148.95 Az status=0008 Ze status=0009 05:41:59 Check angles 05:41:59 SkyScan query 05:42:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.89<-23326 Statuses=0008 0009 05:42:00 Msec=5250 True Az=112.995 Ze=-169.89 Az status=0008 Ze status=0009 05:42:00 Check angles 05:42:00 SkyScan query 05:42:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:42:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:42:01 Message to Master queued w/err=0: serial=77792 error=0 05:42:06 Received message from Master: op=Filter serial=77793 05:42:06 Color wheel filter change from 0 to 0 05:42:06 FLIGetFilterPos err=0 currentPosition=0 05:42:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:06 Filter is already there-color wheel unchanged 05:42:06 Received message from Master: op=Shutter serial=77794 05:42:06 Shutter LASER open 05:42:06 Received message from Camera: op=State serial=77796 05:42:06 GetSingleValue result=40 Value=cccccccc 05:42:06 SkyScan query 05:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:42:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:07 Parameters OK 05:42:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:07 Set A/D data flow result=40 05:42:07 Set A/D channel type result=40 05:42:07 Set A/D encoding result=40 05:42:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:07 Set channel filter=0.000000e+000 result=40 05:42:07 Config A/D Result=40 05:42:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:07 Get A/D filter: -9.255963e+061 result=40 05:42:07 Get A/D value=-858993460 result=40 05:42:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:07 Parameters OK 05:42:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:07 Set A/D data flow result=40 05:42:07 Set A/D channel type result=40 05:42:07 Set A/D encoding result=40 05:42:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:07 Set channel filter=0.000000e+000 result=40 05:42:07 Config A/D Result=40 05:42:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:07 Get A/D filter: -9.255963e+061 result=40 05:42:07 Get A/D value=-858993460 result=40 05:42:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:07 Aux= 05:42:07 Message to Camera, serial 77796 queued 05:42:15 Received message from Master: op=Shutter serial=77806 05:42:15 Shutter LASER close 05:42:15 Received message from Master: op=PointingHead serial=77810 05:42:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:42:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:42:16 Point started: ret=0 05:42:16 point_skyscan result=0 05:42:17 Check angles 05:42:17 SkyScan query 05:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 05:42:17 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 05:42:17 Check angles 05:42:17 SkyScan query 05:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 05:42:18 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 05:42:18 Check angles 05:42:18 SkyScan query 05:42:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 05:42:19 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 05:42:19 Check angles 05:42:19 SkyScan query 05:42:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.71<-17314 Statuses=0008 0009 05:42:19 Msec=2250 True Az=112.995 Ze=-79.71 Az status=0008 Ze status=0009 05:42:20 Check angles 05:42:20 SkyScan query 05:42:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.77<-15918 Statuses=0008 0009 05:42:20 Msec=3000 True Az=112.995 Ze=-58.77 Az status=0008 Ze status=0009 05:42:20 Check angles 05:42:20 SkyScan query 05:42:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 05:42:21 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 05:42:21 Check angles 05:42:21 SkyScan query 05:42:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 05:42:22 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 05:42:22 Check angles 05:42:22 SkyScan query 05:42:22 SkyScan query done: ret=0 az=112.995<-7533 ze=4.455<-11703 Statuses=0008 0009 05:42:22 Msec=5250 True Az=112.995 Ze=4.455 Az status=0008 Ze status=0009 05:42:23 Check angles 05:42:23 SkyScan query 05:42:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:42:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:42:23 Message to Master queued w/err=0: serial=77810 error=0 05:42:28 Received message from Master: op=Filter serial=77811 05:42:28 Color wheel filter change from 0 to 0 05:42:28 FLIGetFilterPos err=0 currentPosition=0 05:42:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:28 Filter is already there-color wheel unchanged 05:42:28 Received message from Master: op=Shutter serial=77812 05:42:28 Shutter LASER close 05:42:29 Received message from Camera: op=State serial=77814 05:42:29 GetSingleValue result=40 Value=cccccccc 05:42:29 SkyScan query 05:42:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:42:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:29 Parameters OK 05:42:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:29 Set A/D data flow result=40 05:42:29 Set A/D channel type result=40 05:42:29 Set A/D encoding result=40 05:42:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:29 Set channel filter=0.000000e+000 result=40 05:42:29 Config A/D Result=40 05:42:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:29 Get A/D filter: -9.255963e+061 result=40 05:42:29 Get A/D value=-858993460 result=40 05:42:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:29 Parameters OK 05:42:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:29 Set A/D data flow result=40 05:42:29 Set A/D channel type result=40 05:42:29 Set A/D encoding result=40 05:42:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:29 Set channel filter=0.000000e+000 result=40 05:42:29 Config A/D Result=40 05:42:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:29 Get A/D filter: -9.255963e+061 result=40 05:42:29 Get A/D value=-858993460 result=40 05:42:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:29 Aux= 05:42:29 Message to Camera, serial 77814 queued 05:43:06 Received message from Master: op=PointingHead serial=77827 05:43:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:43:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:43:06 Point started: ret=0 05:43:06 point_skyscan result=0 05:43:07 Check angles 05:43:07 SkyScan query 05:43:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:43:08 Message to Master queued w/err=0: serial=77827 error=0 05:43:13 Received message from Master: op=Filter serial=77828 05:43:13 Color wheel filter change from 0 to 0 05:43:13 FLIGetFilterPos err=0 currentPosition=0 05:43:13 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:13 Filter is already there-color wheel unchanged 05:43:13 Received message from Master: op=Shutter serial=77829 05:43:13 Shutter LASER close 05:43:13 Received message from Camera: op=State serial=77831 05:43:13 GetSingleValue result=40 Value=cccccccc 05:43:13 SkyScan query 05:43:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:13 Parameters OK 05:43:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:13 Set A/D data flow result=40 05:43:13 Set A/D channel type result=40 05:43:13 Set A/D encoding result=40 05:43:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:13 Set channel filter=0.000000e+000 result=40 05:43:13 Config A/D Result=40 05:43:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:13 Get A/D filter: -9.255963e+061 result=40 05:43:13 Get A/D value=-858993460 result=40 05:43:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:13 Parameters OK 05:43:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:13 Set A/D data flow result=40 05:43:13 Set A/D channel type result=40 05:43:13 Set A/D encoding result=40 05:43:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:13 Set channel filter=0.000000e+000 result=40 05:43:13 Config A/D Result=40 05:43:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:13 Get A/D filter: -9.255963e+061 result=40 05:43:13 Get A/D value=-858993460 result=40 05:43:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:13 Aux= 05:43:13 Message to Camera, serial 77831 queued [UTC 2019-3-3 05:43:50] 05:43:50 Received message from Master: op=PointingHead serial=77844 05:43:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:43:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:43:51 Point started: ret=0 05:43:51 point_skyscan result=0 05:43:51 Check angles 05:43:51 SkyScan query 05:43:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:43:52 Message to Master queued w/err=0: serial=77844 error=0 05:43:57 Received message from Master: op=Filter serial=77845 05:43:57 Color wheel filter change from 0 to 0 05:43:57 FLIGetFilterPos err=0 currentPosition=0 05:43:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:57 Filter is already there-color wheel unchanged 05:43:57 Received message from Master: op=Shutter serial=77846 05:43:57 Shutter LASER close 05:43:57 Received message from Camera: op=State serial=77848 05:43:57 GetSingleValue result=40 Value=cccccccc 05:43:57 SkyScan query 05:43:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:58 Parameters OK 05:43:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:58 Set A/D data flow result=40 05:43:58 Set A/D channel type result=40 05:43:58 Set A/D encoding result=40 05:43:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:58 Set channel filter=0.000000e+000 result=40 05:43:58 Config A/D Result=40 05:43:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:58 Get A/D filter: -9.255963e+061 result=40 05:43:58 Get A/D value=-858993460 result=40 05:43:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:58 Parameters OK 05:43:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:58 Set A/D data flow result=40 05:43:58 Set A/D channel type result=40 05:43:58 Set A/D encoding result=40 05:43:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:58 Set channel filter=0.000000e+000 result=40 05:43:58 Config A/D Result=40 05:43:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:58 Get A/D filter: -9.255963e+061 result=40 05:43:58 Get A/D value=-858993460 result=40 05:43:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:58 Aux= 05:43:58 Message to Camera, serial 77848 queued 05:44:35 Received message from Master: op=PointingHead serial=77861 05:44:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:44:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:44:35 Point started: ret=0 05:44:35 point_skyscan result=0 05:44:36 Check angles 05:44:36 SkyScan query 05:44:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:44:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:44:36 Message to Master queued w/err=0: serial=77861 error=0 05:44:41 Received message from Master: op=Filter serial=77862 05:44:41 Color wheel filter change from 0 to 0 05:44:41 FLIGetFilterPos err=0 currentPosition=0 05:44:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:41 Filter is already there-color wheel unchanged 05:44:41 Received message from Master: op=Shutter serial=77863 05:44:41 Shutter LASER close 05:44:41 Received message from Camera: op=State serial=77865 05:44:41 GetSingleValue result=40 Value=cccccccc 05:44:41 SkyScan query 05:44:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:44:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:42 Parameters OK 05:44:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:42 Set A/D data flow result=40 05:44:42 Set A/D channel type result=40 05:44:42 Set A/D encoding result=40 05:44:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:42 Set channel filter=0.000000e+000 result=40 05:44:42 Config A/D Result=40 05:44:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:42 Get A/D filter: -9.255963e+061 result=40 05:44:42 Get A/D value=-858993460 result=40 05:44:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:42 Parameters OK 05:44:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:42 Set A/D data flow result=40 05:44:42 Set A/D channel type result=40 05:44:42 Set A/D encoding result=40 05:44:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:42 Set channel filter=0.000000e+000 result=40 05:44:42 Config A/D Result=40 05:44:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:42 Get A/D filter: -9.255963e+061 result=40 05:44:42 Get A/D value=-858993460 result=40 05:44:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:42 Aux= 05:44:42 Message to Camera, serial 77865 queued 05:45:19 Received message from Master: op=PointingHead serial=77878 05:45:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:45:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:45:19 Point started: ret=0 05:45:19 point_skyscan result=0 05:45:20 Check angles 05:45:20 SkyScan query 05:45:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.52<-13568 Statuses=0008 0009 05:45:21 Msec=0 True Az=112.995 Ze=-23.52 Az status=0008 Ze status=0009 05:45:21 Check angles 05:45:21 SkyScan query 05:45:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 05:45:21 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 05:45:22 Check angles 05:45:22 SkyScan query 05:45:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 05:45:22 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 05:45:22 Check angles 05:45:22 SkyScan query 05:45:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 05:45:23 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 05:45:23 Check angles 05:45:23 SkyScan query 05:45:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.21<-19214 Statuses=0008 0009 05:45:24 Msec=3000 True Az=112.995 Ze=-108.21 Az status=0008 Ze status=0009 05:45:24 Check angles 05:45:24 SkyScan query 05:45:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.585<-20639 Statuses=0008 0009 05:45:24 Msec=3750 True Az=112.995 Ze=-129.585 Az status=0008 Ze status=0009 05:45:25 Check angles 05:45:25 SkyScan query 05:45:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.54<-22036 Statuses=0008 0009 05:45:25 Msec=4500 True Az=112.995 Ze=-150.54 Az status=0008 Ze status=0009 05:45:25 Check angles 05:45:25 SkyScan query 05:45:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.285<-23419 Statuses=0008 0009 05:45:26 Msec=5250 True Az=112.995 Ze=-171.285 Az status=0008 Ze status=0009 05:45:26 Check angles 05:45:26 SkyScan query 05:45:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:45:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:45:27 Message to Master queued w/err=0: serial=77878 error=0 05:45:32 Received message from Master: op=Filter serial=77879 05:45:32 Color wheel filter change from 0 to 0 05:45:32 FLIGetFilterPos err=0 currentPosition=0 05:45:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:32 Filter is already there-color wheel unchanged 05:45:32 Received message from Master: op=Shutter serial=77880 05:45:32 Shutter LASER open 05:45:32 Received message from Camera: op=State serial=77882 05:45:32 GetSingleValue result=40 Value=cccccccc 05:45:32 SkyScan query 05:45:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:45:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:33 Parameters OK 05:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:33 Set A/D data flow result=40 05:45:33 Set A/D channel type result=40 05:45:33 Set A/D encoding result=40 05:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:33 Set channel filter=0.000000e+000 result=40 05:45:33 Config A/D Result=40 05:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:33 Get A/D filter: -9.255963e+061 result=40 05:45:33 Get A/D value=-858993460 result=40 05:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:33 Parameters OK 05:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:33 Set A/D data flow result=40 05:45:33 Set A/D channel type result=40 05:45:33 Set A/D encoding result=40 05:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:33 Set channel filter=0.000000e+000 result=40 05:45:33 Config A/D Result=40 05:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:33 Get A/D filter: -9.255963e+061 result=40 05:45:33 Get A/D value=-858993460 result=40 05:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:33 Aux= 05:45:33 Message to Camera, serial 77882 queued 05:45:41 Received message from Master: op=Shutter serial=77892 05:45:41 Shutter LASER close 05:45:42 Received message from Master: op=PointingHead serial=77896 05:45:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:45:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:45:42 Point started: ret=0 05:45:42 point_skyscan result=0 05:45:43 Check angles 05:45:43 SkyScan query 05:45:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 05:45:43 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 05:45:43 Check angles 05:45:43 SkyScan query 05:45:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 05:45:44 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 05:45:44 Check angles 05:45:44 SkyScan query 05:45:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.605<-18707 Statuses=0008 0009 05:45:45 Msec=1500 True Az=112.995 Ze=-100.605 Az status=0008 Ze status=0009 05:45:45 Check angles 05:45:45 SkyScan query 05:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 05:45:46 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 05:45:46 Check angles 05:45:46 SkyScan query 05:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.695<-15913 Statuses=0008 0009 05:45:46 Msec=3000 True Az=112.995 Ze=-58.695 Az status=0008 Ze status=0009 05:45:46 Check angles 05:45:46 SkyScan query 05:45:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 05:45:47 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 05:45:47 Check angles 05:45:47 SkyScan query 05:45:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.77<-13118 Statuses=0008 0009 05:45:48 Msec=4500 True Az=112.995 Ze=-16.77 Az status=0008 Ze status=0009 05:45:48 Check angles 05:45:48 SkyScan query 05:45:49 SkyScan query done: ret=0 az=112.995<-7533 ze=4.155<-11723 Statuses=0008 0009 05:45:49 Msec=5250 True Az=112.995 Ze=4.155 Az status=0008 Ze status=0009 05:45:49 Check angles 05:45:49 SkyScan query 05:45:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:45:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:45:49 Message to Master queued w/err=0: serial=77896 error=0 05:45:54 Received message from Master: op=Filter serial=77897 05:45:54 Color wheel filter change from 0 to 0 05:45:54 FLIGetFilterPos err=0 currentPosition=0 05:45:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:54 Filter is already there-color wheel unchanged 05:45:54 Received message from Master: op=Shutter serial=77898 05:45:54 Shutter LASER close 05:45:55 Received message from Camera: op=State serial=77900 05:45:55 GetSingleValue result=40 Value=cccccccc 05:45:55 SkyScan query 05:45:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:45:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:55 Parameters OK 05:45:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:55 Set A/D data flow result=40 05:45:55 Set A/D channel type result=40 05:45:55 Set A/D encoding result=40 05:45:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:55 Set channel filter=0.000000e+000 result=40 05:45:55 Config A/D Result=40 05:45:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:55 Get A/D filter: -9.255963e+061 result=40 05:45:55 Get A/D value=-858993460 result=40 05:45:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:55 Parameters OK 05:45:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:55 Set A/D data flow result=40 05:45:55 Set A/D channel type result=40 05:45:55 Set A/D encoding result=40 05:45:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:55 Set channel filter=0.000000e+000 result=40 05:45:55 Config A/D Result=40 05:45:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:55 Get A/D filter: -9.255963e+061 result=40 05:45:55 Get A/D value=-858993460 result=40 05:45:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:55 Aux= 05:45:55 Message to Camera, serial 77900 queued 05:46:32 Received message from Master: op=PointingHead serial=77913 05:46:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:46:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:46:32 Point started: ret=0 05:46:32 point_skyscan result=0 05:46:33 Check angles 05:46:33 SkyScan query 05:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:46:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:46:34 Message to Master queued w/err=0: serial=77913 error=0 05:46:39 Received message from Master: op=Filter serial=77914 05:46:39 Color wheel filter change from 0 to 0 05:46:39 FLIGetFilterPos err=0 currentPosition=0 05:46:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:39 Filter is already there-color wheel unchanged 05:46:39 Received message from Master: op=Shutter serial=77915 05:46:39 Shutter LASER close 05:46:39 Received message from Camera: op=State serial=77917 05:46:39 GetSingleValue result=40 Value=cccccccc 05:46:39 SkyScan query 05:46:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:46:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:39 Parameters OK 05:46:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:39 Set A/D data flow result=40 05:46:39 Set A/D channel type result=40 05:46:39 Set A/D encoding result=40 05:46:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:39 Set channel filter=0.000000e+000 result=40 05:46:39 Config A/D Result=40 05:46:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:39 Get A/D filter: -9.255963e+061 result=40 05:46:39 Get A/D value=-858993460 result=40 05:46:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:39 Parameters OK 05:46:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:39 Set A/D data flow result=40 05:46:39 Set A/D channel type result=40 05:46:39 Set A/D encoding result=40 05:46:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:39 Set channel filter=0.000000e+000 result=40 05:46:39 Config A/D Result=40 05:46:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:39 Get A/D filter: -9.255963e+061 result=40 05:46:39 Get A/D value=-858993460 result=40 05:46:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:39 Aux= 05:46:39 Message to Camera, serial 77917 queued 05:47:16 Received message from Master: op=PointingHead serial=77930 05:47:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:47:16 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:47:17 Point started: ret=0 05:47:17 point_skyscan result=0 05:47:17 Check angles 05:47:17 SkyScan query 05:47:18 SkyScan query done: ret=0 az=135.87<-9058 ze=-6.51<-12434 Statuses=0009 0008 05:47:18 Msec=0 True Az=135.87 Ze=-6.51 Az status=0009 Ze status=0008 05:47:18 Check angles 05:47:18 SkyScan query 05:47:19 SkyScan query done: ret=0 az=153.66<-10244 ze=-6.495<-12433 Statuses=0009 0008 05:47:19 Msec=750 True Az=153.66 Ze=-6.495 Az status=0009 Ze status=0008 05:47:19 Check angles 05:47:19 SkyScan query 05:47:20 SkyScan query done: ret=0 az=171.465<-11431 ze=-6.495<-12433 Statuses=0009 0008 05:47:20 Msec=1500 True Az=171.465 Ze=-6.495 Az status=0009 Ze status=0008 05:47:20 Check angles 05:47:20 SkyScan query 05:47:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:47:20 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:47:20 Message to Master queued w/err=0: serial=77930 error=0 05:47:25 Received message from Master: op=Filter serial=77931 05:47:25 Color wheel filter change from 0 to 0 05:47:25 FLIGetFilterPos err=0 currentPosition=0 05:47:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:25 Filter is already there-color wheel unchanged 05:47:25 Received message from Master: op=Shutter serial=77932 05:47:25 Shutter LASER close 05:47:26 Received message from Camera: op=State serial=77934 05:47:26 GetSingleValue result=40 Value=cccccccc 05:47:26 SkyScan query 05:47:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:47:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:26 Parameters OK 05:47:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:26 Set A/D data flow result=40 05:47:26 Set A/D channel type result=40 05:47:26 Set A/D encoding result=40 05:47:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:26 Set channel filter=0.000000e+000 result=40 05:47:26 Config A/D Result=40 05:47:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:26 Get A/D filter: -9.255963e+061 result=40 05:47:26 Get A/D value=-858993460 result=40 05:47:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:26 Parameters OK 05:47:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:26 Set A/D data flow result=40 05:47:26 Set A/D channel type result=40 05:47:26 Set A/D encoding result=40 05:47:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:26 Set channel filter=0.000000e+000 result=40 05:47:26 Config A/D Result=40 05:47:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:26 Get A/D filter: -9.255963e+061 result=40 05:47:26 Get A/D value=-858993460 result=40 05:47:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:26 Aux= 05:47:26 Message to Camera, serial 77934 queued 05:48:02 Received message from Master: op=PointingHead serial=77946 05:48:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:48:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:48:02 Point started: ret=0 05:48:02 point_skyscan result=0 05:48:03 Check angles 05:48:03 SkyScan query 05:48:04 SkyScan query done: ret=0 az=153.09<-10206 ze=6.51<-11566 Statuses=0009 0008 05:48:04 Msec=0 True Az=153.09 Ze=6.51 Az status=0009 Ze status=0008 05:48:04 Check angles 05:48:04 SkyScan query 05:48:05 SkyScan query done: ret=0 az=135.615<-9041 ze=6.495<-11567 Statuses=0009 0008 05:48:05 Msec=750 True Az=135.615 Ze=6.495 Az status=0009 Ze status=0008 05:48:05 Check angles 05:48:05 SkyScan query 05:48:05 SkyScan query done: ret=0 az=117.915<-7861 ze=6.495<-11567 Statuses=0009 0008 05:48:05 Msec=1500 True Az=117.915 Ze=6.495 Az status=0009 Ze status=0008 05:48:05 Check angles 05:48:05 SkyScan query 05:48:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:48:06 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:48:06 Message to Master queued w/err=0: serial=77946 error=0 05:48:11 Received message from Master: op=Filter serial=77947 05:48:11 Color wheel filter change from 0 to 0 05:48:11 FLIGetFilterPos err=0 currentPosition=0 05:48:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:11 Filter is already there-color wheel unchanged 05:48:11 Received message from Master: op=Shutter serial=77948 05:48:11 Shutter LASER close 05:48:11 Received message from Camera: op=State serial=77950 05:48:11 GetSingleValue result=40 Value=cccccccc 05:48:11 SkyScan query 05:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:48:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:12 Parameters OK 05:48:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:12 Set A/D data flow result=40 05:48:12 Set A/D channel type result=40 05:48:12 Set A/D encoding result=40 05:48:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:12 Set channel filter=0.000000e+000 result=40 05:48:12 Config A/D Result=40 05:48:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:12 Get A/D filter: -9.255963e+061 result=40 05:48:12 Get A/D value=-858993460 result=40 05:48:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:12 Parameters OK 05:48:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:12 Set A/D data flow result=40 05:48:12 Set A/D channel type result=40 05:48:12 Set A/D encoding result=40 05:48:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:12 Set channel filter=0.000000e+000 result=40 05:48:12 Config A/D Result=40 05:48:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:12 Get A/D filter: -9.255963e+061 result=40 05:48:12 Get A/D value=-858993460 result=40 05:48:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:12 Aux= 05:48:12 Message to Camera, serial 77950 queued 05:48:49 Received message from Master: op=PointingHead serial=77963 05:48:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:48:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:48:49 Point started: ret=0 05:48:49 point_skyscan result=0 05:48:50 Check angles 05:48:50 SkyScan query 05:48:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 05:48:50 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 05:48:51 Check angles 05:48:51 SkyScan query 05:48:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 05:48:51 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 05:48:51 Check angles 05:48:51 SkyScan query 05:48:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 05:48:52 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 05:48:52 Check angles 05:48:52 SkyScan query 05:48:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 05:48:53 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 05:48:53 Check angles 05:48:53 SkyScan query 05:48:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.76<-19184 Statuses=0008 0009 05:48:54 Msec=3000 True Az=112.995 Ze=-107.76 Az status=0008 Ze status=0009 05:48:54 Check angles 05:48:54 SkyScan query 05:48:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.7<-20580 Statuses=0008 0009 05:48:54 Msec=3750 True Az=112.995 Ze=-128.7 Az status=0008 Ze status=0009 05:48:54 Check angles 05:48:54 SkyScan query 05:48:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.09<-22006 Statuses=0008 0009 05:48:55 Msec=4500 True Az=112.995 Ze=-150.09 Az status=0008 Ze status=0009 05:48:55 Check angles 05:48:55 SkyScan query 05:48:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0008 0009 05:48:56 Msec=5250 True Az=112.995 Ze=-170.925 Az status=0008 Ze status=0009 05:48:56 Check angles 05:48:56 SkyScan query 05:48:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:48:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:48:57 Message to Master queued w/err=0: serial=77963 error=0 05:49:02 Received message from Master: op=Filter serial=77964 05:49:02 Color wheel filter change from 0 to 0 05:49:02 FLIGetFilterPos err=0 currentPosition=0 05:49:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:02 Filter is already there-color wheel unchanged 05:49:02 Received message from Master: op=Shutter serial=77965 05:49:02 Shutter LASER open 05:49:02 Received message from Camera: op=State serial=77967 05:49:02 GetSingleValue result=40 Value=cccccccc 05:49:02 SkyScan query 05:49:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:49:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:02 Parameters OK 05:49:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:02 Set A/D data flow result=40 05:49:02 Set A/D channel type result=40 05:49:02 Set A/D encoding result=40 05:49:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:02 Set channel filter=0.000000e+000 result=40 05:49:02 Config A/D Result=40 05:49:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:02 Get A/D filter: -9.255963e+061 result=40 05:49:02 Get A/D value=-858993460 result=40 05:49:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:02 Parameters OK 05:49:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:02 Set A/D data flow result=40 05:49:02 Set A/D channel type result=40 05:49:02 Set A/D encoding result=40 05:49:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:02 Set channel filter=0.000000e+000 result=40 05:49:02 Config A/D Result=40 05:49:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:02 Get A/D filter: -9.255963e+061 result=40 05:49:02 Get A/D value=-858993460 result=40 05:49:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:02 Aux= 05:49:02 Message to Camera, serial 77967 queued 05:49:11 Received message from Master: op=Shutter serial=77977 05:49:11 Shutter LASER close 05:49:11 Received message from Master: op=PointingHead serial=77981 05:49:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:49:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:49:12 Point started: ret=0 05:49:12 point_skyscan result=0 05:49:12 Check angles 05:49:12 SkyScan query 05:49:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 05:49:13 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 05:49:13 Check angles 05:49:13 SkyScan query 05:49:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 05:49:14 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 05:49:14 Check angles 05:49:14 SkyScan query 05:49:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 05:49:15 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 05:49:15 Check angles 05:49:15 SkyScan query 05:49:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 05:49:15 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 05:49:15 Check angles 05:49:15 SkyScan query 05:49:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 05:49:16 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 05:49:16 Check angles 05:49:16 SkyScan query 05:49:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 05:49:17 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 05:49:17 Check angles 05:49:17 SkyScan query 05:49:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 05:49:18 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 05:49:18 Check angles 05:49:18 SkyScan query 05:49:18 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 05:49:18 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 05:49:18 Check angles 05:49:18 SkyScan query 05:49:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:49:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:49:19 Message to Master queued w/err=0: serial=77981 error=0 05:49:24 Received message from Master: op=Filter serial=77982 05:49:24 Color wheel filter change from 0 to 0 05:49:24 FLIGetFilterPos err=0 currentPosition=0 05:49:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:24 Filter is already there-color wheel unchanged 05:49:24 Received message from Master: op=Shutter serial=77983 05:49:24 Shutter LASER close 05:49:24 Received message from Camera: op=State serial=77985 05:49:24 GetSingleValue result=40 Value=cccccccc 05:49:24 SkyScan query 05:49:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:49:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:25 Parameters OK 05:49:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:25 Set A/D data flow result=40 05:49:25 Set A/D channel type result=40 05:49:25 Set A/D encoding result=40 05:49:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:25 Set channel filter=0.000000e+000 result=40 05:49:25 Config A/D Result=40 05:49:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:25 Get A/D filter: -9.255963e+061 result=40 05:49:25 Get A/D value=-858993460 result=40 05:49:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:25 Parameters OK 05:49:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:25 Set A/D data flow result=40 05:49:25 Set A/D channel type result=40 05:49:25 Set A/D encoding result=40 05:49:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:25 Set channel filter=0.000000e+000 result=40 05:49:25 Config A/D Result=40 05:49:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:25 Get A/D filter: -9.255963e+061 result=40 05:49:25 Get A/D value=-858993460 result=40 05:49:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:25 Aux= 05:49:25 Message to Camera, serial 77985 queued 05:50:02 Received message from Master: op=PointingHead serial=77998 05:50:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:50:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:50:02 Point started: ret=0 05:50:02 point_skyscan result=0 05:50:03 Check angles 05:50:03 SkyScan query 05:50:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:50:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:50:03 Message to Master queued w/err=0: serial=77998 error=0 05:50:08 Received message from Master: op=Filter serial=77999 05:50:08 Color wheel filter change from 0 to 0 05:50:08 FLIGetFilterPos err=0 currentPosition=0 05:50:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:08 Filter is already there-color wheel unchanged 05:50:09 Received message from Master: op=Shutter serial=78000 05:50:09 Shutter LASER close 05:50:09 Received message from Camera: op=State serial=78002 05:50:09 GetSingleValue result=40 Value=cccccccc 05:50:09 SkyScan query 05:50:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:50:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:09 Parameters OK 05:50:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:09 Set A/D data flow result=40 05:50:09 Set A/D channel type result=40 05:50:09 Set A/D encoding result=40 05:50:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:09 Set channel filter=0.000000e+000 result=40 05:50:09 Config A/D Result=40 05:50:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:09 Get A/D filter: -9.255963e+061 result=40 05:50:09 Get A/D value=-858993460 result=40 05:50:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:09 Parameters OK 05:50:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:09 Set A/D data flow result=40 05:50:09 Set A/D channel type result=40 05:50:09 Set A/D encoding result=40 05:50:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:09 Set channel filter=0.000000e+000 result=40 05:50:09 Config A/D Result=40 05:50:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:09 Get A/D filter: -9.255963e+061 result=40 05:50:09 Get A/D value=-858993460 result=40 05:50:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:09 Aux= 05:50:09 Message to Camera, serial 78002 queued 05:50:46 Received message from Master: op=PointingHead serial=78015 05:50:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:50:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:50:46 Point started: ret=0 05:50:46 point_skyscan result=0 05:50:47 Check angles 05:50:47 SkyScan query 05:50:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:50:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:50:48 Message to Master queued w/err=0: serial=78015 error=0 05:50:53 Received message from Master: op=Filter serial=78016 05:50:53 Color wheel filter change from 0 to 0 05:50:53 FLIGetFilterPos err=0 currentPosition=0 05:50:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:53 Filter is already there-color wheel unchanged 05:50:53 Received message from Master: op=Shutter serial=78017 05:50:53 Shutter LASER close 05:50:53 Received message from Camera: op=State serial=78019 05:50:53 GetSingleValue result=40 Value=cccccccc 05:50:53 SkyScan query 05:50:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:50:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:54 Parameters OK 05:50:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:54 Set A/D data flow result=40 05:50:54 Set A/D channel type result=40 05:50:54 Set A/D encoding result=40 05:50:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:54 Set channel filter=0.000000e+000 result=40 05:50:54 Config A/D Result=40 05:50:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:54 Get A/D filter: -9.255963e+061 result=40 05:50:54 Get A/D value=-858993460 result=40 05:50:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:54 Parameters OK 05:50:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:54 Set A/D data flow result=40 05:50:54 Set A/D channel type result=40 05:50:54 Set A/D encoding result=40 05:50:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:54 Set channel filter=0.000000e+000 result=40 05:50:54 Config A/D Result=40 05:50:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:54 Get A/D filter: -9.255963e+061 result=40 05:50:54 Get A/D value=-858993460 result=40 05:50:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:54 Aux= 05:50:54 Message to Camera, serial 78019 queued 05:51:30 Received message from Master: op=PointingHead serial=78032 05:51:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:51:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:51:31 Point started: ret=0 05:51:31 point_skyscan result=0 05:51:32 Check angles 05:51:32 SkyScan query 05:51:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:51:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:51:32 Message to Master queued w/err=0: serial=78032 error=0 05:51:37 Received message from Master: op=Filter serial=78033 05:51:37 Color wheel filter change from 0 to 0 05:51:37 FLIGetFilterPos err=0 currentPosition=0 05:51:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:37 Filter is already there-color wheel unchanged 05:51:37 Received message from Master: op=Shutter serial=78034 05:51:37 Shutter LASER close 05:51:37 Received message from Camera: op=State serial=78036 05:51:37 GetSingleValue result=40 Value=cccccccc 05:51:37 SkyScan query 05:51:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:51:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:38 Parameters OK 05:51:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:38 Set A/D data flow result=40 05:51:38 Set A/D channel type result=40 05:51:38 Set A/D encoding result=40 05:51:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:38 Set channel filter=0.000000e+000 result=40 05:51:38 Config A/D Result=40 05:51:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:38 Get A/D filter: -9.255963e+061 result=40 05:51:38 Get A/D value=-858993460 result=40 05:51:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:38 Parameters OK 05:51:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:38 Set A/D data flow result=40 05:51:38 Set A/D channel type result=40 05:51:38 Set A/D encoding result=40 05:51:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:38 Set channel filter=0.000000e+000 result=40 05:51:38 Config A/D Result=40 05:51:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:38 Get A/D filter: -9.255963e+061 result=40 05:51:38 Get A/D value=-858993460 result=40 05:51:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:38 Aux= 05:51:38 Message to Camera, serial 78036 queued 05:52:15 Received message from Master: op=PointingHead serial=78049 05:52:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:52:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:52:15 Point started: ret=0 05:52:15 point_skyscan result=0 05:52:16 Check angles 05:52:16 SkyScan query 05:52:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.685<-13579 Statuses=0008 0009 05:52:16 Msec=0 True Az=112.995 Ze=-23.685 Az status=0008 Ze status=0009 05:52:17 Check angles 05:52:17 SkyScan query 05:52:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.09<-15006 Statuses=0008 0009 05:52:17 Msec=750 True Az=112.995 Ze=-45.09 Az status=0008 Ze status=0009 05:52:17 Check angles 05:52:17 SkyScan query 05:52:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.03<-16402 Statuses=0008 0009 05:52:18 Msec=1500 True Az=112.995 Ze=-66.03 Az status=0008 Ze status=0009 05:52:18 Check angles 05:52:18 SkyScan query 05:52:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-87<-17800 Statuses=0008 0009 05:52:19 Msec=2250 True Az=112.995 Ze=-87 Az status=0008 Ze status=0009 05:52:19 Check angles 05:52:19 SkyScan query 05:52:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.94<-19196 Statuses=0008 0009 05:52:19 Msec=3000 True Az=112.995 Ze=-107.94 Az status=0008 Ze status=0009 05:52:20 Check angles 05:52:20 SkyScan query 05:52:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.88<-20592 Statuses=0008 0009 05:52:20 Msec=3750 True Az=112.995 Ze=-128.88 Az status=0008 Ze status=0009 05:52:20 Check angles 05:52:20 SkyScan query 05:52:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 05:52:21 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 05:52:21 Check angles 05:52:21 SkyScan query 05:52:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 05:52:22 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 05:52:22 Check angles 05:52:22 SkyScan query 05:52:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:52:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:52:22 Message to Master queued w/err=0: serial=78049 error=0 05:52:27 Received message from Master: op=Filter serial=78050 05:52:27 Color wheel filter change from 0 to 0 05:52:27 FLIGetFilterPos err=0 currentPosition=0 05:52:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:27 Filter is already there-color wheel unchanged 05:52:28 Received message from Master: op=Shutter serial=78051 05:52:28 Shutter LASER open 05:52:28 Received message from Camera: op=State serial=78053 05:52:28 GetSingleValue result=40 Value=cccccccc 05:52:28 SkyScan query 05:52:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:52:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:28 Parameters OK 05:52:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:28 Set A/D data flow result=40 05:52:28 Set A/D channel type result=40 05:52:28 Set A/D encoding result=40 05:52:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:28 Set channel filter=0.000000e+000 result=40 05:52:28 Config A/D Result=40 05:52:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:28 Get A/D filter: -9.255963e+061 result=40 05:52:28 Get A/D value=-858993460 result=40 05:52:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:28 Parameters OK 05:52:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:28 Set A/D data flow result=40 05:52:28 Set A/D channel type result=40 05:52:28 Set A/D encoding result=40 05:52:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:28 Set channel filter=0.000000e+000 result=40 05:52:28 Config A/D Result=40 05:52:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:28 Get A/D filter: -9.255963e+061 result=40 05:52:28 Get A/D value=-858993460 result=40 05:52:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:28 Aux= 05:52:28 Message to Camera, serial 78053 queued 05:52:37 Received message from Master: op=Shutter serial=78063 05:52:37 Shutter LASER close 05:52:37 Received message from Master: op=PointingHead serial=78067 05:52:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:52:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:52:38 Point started: ret=0 05:52:38 point_skyscan result=0 05:52:38 Check angles 05:52:38 SkyScan query 05:52:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.875<-21525 Statuses=0008 0009 05:52:39 Msec=0 True Az=112.995 Ze=-142.875 Az status=0008 Ze status=0009 05:52:39 Check angles 05:52:39 SkyScan query 05:52:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.92<-20128 Statuses=0008 0009 05:52:40 Msec=750 True Az=112.995 Ze=-121.92 Az status=0008 Ze status=0009 05:52:40 Check angles 05:52:40 SkyScan query 05:52:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 05:52:41 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 05:52:41 Check angles 05:52:41 SkyScan query 05:52:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.025<-17335 Statuses=0008 0009 05:52:41 Msec=2250 True Az=112.995 Ze=-80.025 Az status=0008 Ze status=0009 05:52:41 Check angles 05:52:41 SkyScan query 05:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 05:52:42 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 05:52:42 Check angles 05:52:42 SkyScan query 05:52:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.085<-14539 Statuses=0008 0009 05:52:43 Msec=3750 True Az=112.995 Ze=-38.085 Az status=0008 Ze status=0009 05:52:43 Check angles 05:52:43 SkyScan query 05:52:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.145<-13143 Statuses=0008 0009 05:52:44 Msec=4500 True Az=112.995 Ze=-17.145 Az status=0008 Ze status=0009 05:52:44 Check angles 05:52:44 SkyScan query 05:52:44 SkyScan query done: ret=0 az=112.995<-7533 ze=3.81<-11746 Statuses=0008 0009 05:52:44 Msec=5250 True Az=112.995 Ze=3.81 Az status=0008 Ze status=0009 05:52:44 Check angles 05:52:44 SkyScan query 05:52:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:52:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:52:45 Message to Master queued w/err=0: serial=78067 error=0 05:52:50 Received message from Master: op=Filter serial=78068 05:52:50 Color wheel filter change from 0 to 0 05:52:50 FLIGetFilterPos err=0 currentPosition=0 05:52:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:50 Filter is already there-color wheel unchanged 05:52:50 Received message from Master: op=Shutter serial=78069 05:52:50 Shutter LASER close 05:52:50 Received message from Camera: op=State serial=78071 05:52:50 GetSingleValue result=40 Value=cccccccc 05:52:50 SkyScan query 05:52:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:52:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:51 Parameters OK 05:52:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:51 Set A/D data flow result=40 05:52:51 Set A/D channel type result=40 05:52:51 Set A/D encoding result=40 05:52:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:51 Set channel filter=0.000000e+000 result=40 05:52:51 Config A/D Result=40 05:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:51 Get A/D filter: -9.255963e+061 result=40 05:52:51 Get A/D value=-858993460 result=40 05:52:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:51 Parameters OK 05:52:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:51 Set A/D data flow result=40 05:52:51 Set A/D channel type result=40 05:52:51 Set A/D encoding result=40 05:52:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:51 Set channel filter=0.000000e+000 result=40 05:52:51 Config A/D Result=40 05:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:51 Get A/D filter: -9.255963e+061 result=40 05:52:51 Get A/D value=-858993460 result=40 05:52:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:51 Aux= 05:52:51 Message to Camera, serial 78071 queued 05:53:28 Received message from Master: op=PointingHead serial=78084 05:53:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:53:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:53:28 Point started: ret=0 05:53:28 point_skyscan result=0 05:53:29 Check angles 05:53:29 SkyScan query 05:53:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:53:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:53:30 Message to Master queued w/err=0: serial=78084 error=0 05:53:35 Received message from Master: op=Filter serial=78085 05:53:35 Color wheel filter change from 0 to 0 05:53:35 FLIGetFilterPos err=0 currentPosition=0 05:53:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:35 Filter is already there-color wheel unchanged 05:53:35 Received message from Master: op=Shutter serial=78086 05:53:35 Shutter LASER close 05:53:35 Received message from Camera: op=State serial=78088 05:53:35 GetSingleValue result=40 Value=cccccccc 05:53:35 SkyScan query 05:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:53:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:35 Parameters OK 05:53:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:35 Set A/D data flow result=40 05:53:35 Set A/D channel type result=40 05:53:35 Set A/D encoding result=40 05:53:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:35 Set channel filter=0.000000e+000 result=40 05:53:35 Config A/D Result=40 05:53:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:35 Get A/D filter: -9.255963e+061 result=40 05:53:35 Get A/D value=-858993460 result=40 05:53:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:35 Parameters OK 05:53:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:35 Set A/D data flow result=40 05:53:35 Set A/D channel type result=40 05:53:35 Set A/D encoding result=40 05:53:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:35 Set channel filter=0.000000e+000 result=40 05:53:35 Config A/D Result=40 05:53:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:35 Get A/D filter: -9.255963e+061 result=40 05:53:35 Get A/D value=-858993460 result=40 05:53:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:35 Aux= 05:53:35 Message to Camera, serial 78088 queued 05:54:12 Received message from Master: op=PointingHead serial=78101 05:54:12 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:54:12 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:54:12 Point started: ret=0 05:54:12 point_skyscan result=0 05:54:13 Check angles 05:54:13 SkyScan query 05:54:14 SkyScan query done: ret=0 az=135.75<-9050 ze=-6.51<-12434 Statuses=0009 0008 05:54:14 Msec=0 True Az=135.75 Ze=-6.51 Az status=0009 Ze status=0008 05:54:14 Check angles 05:54:14 SkyScan query 05:54:15 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.495<-12433 Statuses=0009 0008 [UTC 2019-3-3 05:54:15] 05:54:15 Msec=750 True Az=153.285 Ze=-6.495 Az status=0009 Ze status=0008 05:54:15 Check angles 05:54:15 SkyScan query 05:54:15 SkyScan query done: ret=0 az=170.76<-11384 ze=-6.495<-12433 Statuses=0009 0008 05:54:15 Msec=1500 True Az=170.76 Ze=-6.495 Az status=0009 Ze status=0008 05:54:15 Check angles 05:54:15 SkyScan query 05:54:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:54:16 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:54:16 Message to Master queued w/err=0: serial=78101 error=0 05:54:21 Received message from Master: op=Filter serial=78102 05:54:21 Color wheel filter change from 0 to 0 05:54:21 FLIGetFilterPos err=0 currentPosition=0 05:54:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:21 Filter is already there-color wheel unchanged 05:54:21 Received message from Master: op=Shutter serial=78103 05:54:21 Shutter LASER close 05:54:21 Received message from Camera: op=State serial=78105 05:54:21 GetSingleValue result=40 Value=cccccccc 05:54:21 SkyScan query 05:54:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:54:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:22 Parameters OK 05:54:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:22 Set A/D data flow result=40 05:54:22 Set A/D channel type result=40 05:54:22 Set A/D encoding result=40 05:54:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:22 Set channel filter=0.000000e+000 result=40 05:54:22 Config A/D Result=40 05:54:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:22 Get A/D filter: -9.255963e+061 result=40 05:54:22 Get A/D value=-858993460 result=40 05:54:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:22 Parameters OK 05:54:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:22 Set A/D data flow result=40 05:54:22 Set A/D channel type result=40 05:54:22 Set A/D encoding result=40 05:54:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:22 Set channel filter=0.000000e+000 result=40 05:54:22 Config A/D Result=40 05:54:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:22 Get A/D filter: -9.255963e+061 result=40 05:54:22 Get A/D value=-858993460 result=40 05:54:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:22 Aux= 05:54:22 Message to Camera, serial 78105 queued 05:54:58 Received message from Master: op=PointingHead serial=78117 05:54:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:54:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:54:58 Point started: ret=0 05:54:58 point_skyscan result=0 05:54:59 Check angles 05:54:59 SkyScan query 05:54:59 SkyScan query done: ret=0 az=153.195<-10213 ze=6.51<-11566 Statuses=0009 0008 05:54:59 Msec=0 True Az=153.195 Ze=6.51 Az status=0009 Ze status=0008 05:55:00 Check angles 05:55:00 SkyScan query 05:55:00 SkyScan query done: ret=0 az=135.33<-9022 ze=6.495<-11567 Statuses=0009 0008 05:55:00 Msec=750 True Az=135.33 Ze=6.495 Az status=0009 Ze status=0008 05:55:00 Check angles 05:55:00 SkyScan query 05:55:01 SkyScan query done: ret=0 az=117.87<-7858 ze=6.495<-11567 Statuses=0009 0008 05:55:01 Msec=1500 True Az=117.87 Ze=6.495 Az status=0009 Ze status=0008 05:55:01 Check angles 05:55:01 SkyScan query 05:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:55:02 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:55:02 Message to Master queued w/err=0: serial=78117 error=0 05:55:07 Received message from Master: op=Filter serial=78118 05:55:07 Color wheel filter change from 0 to 0 05:55:07 FLIGetFilterPos err=0 currentPosition=0 05:55:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:07 Filter is already there-color wheel unchanged 05:55:07 Received message from Master: op=Shutter serial=78119 05:55:07 Shutter LASER close 05:55:07 Received message from Camera: op=State serial=78121 05:55:07 GetSingleValue result=40 Value=cccccccc 05:55:07 SkyScan query 05:55:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:55:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:07 Parameters OK 05:55:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:07 Set A/D data flow result=40 05:55:07 Set A/D channel type result=40 05:55:07 Set A/D encoding result=40 05:55:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:07 Set channel filter=0.000000e+000 result=40 05:55:07 Config A/D Result=40 05:55:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:07 Get A/D filter: -9.255963e+061 result=40 05:55:07 Get A/D value=-858993460 result=40 05:55:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:07 Parameters OK 05:55:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:07 Set A/D data flow result=40 05:55:07 Set A/D channel type result=40 05:55:07 Set A/D encoding result=40 05:55:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:07 Set channel filter=0.000000e+000 result=40 05:55:07 Config A/D Result=40 05:55:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:07 Get A/D filter: -9.255963e+061 result=40 05:55:07 Get A/D value=-858993460 result=40 05:55:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:07 Aux= 05:55:07 Message to Camera, serial 78121 queued 05:55:44 Received message from Master: op=PointingHead serial=78134 05:55:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:55:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:55:45 Point started: ret=0 05:55:45 point_skyscan result=0 05:55:45 Check angles 05:55:45 SkyScan query 05:55:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 05:55:46 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 05:55:46 Check angles 05:55:46 SkyScan query 05:55:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.055<-14937 Statuses=0008 0009 05:55:47 Msec=750 True Az=112.995 Ze=-44.055 Az status=0008 Ze status=0009 05:55:47 Check angles 05:55:47 SkyScan query 05:55:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 05:55:47 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 05:55:48 Check angles 05:55:48 SkyScan query 05:55:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 05:55:48 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 05:55:48 Check angles 05:55:48 SkyScan query 05:55:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.325<-19155 Statuses=0008 0009 05:55:49 Msec=3000 True Az=112.995 Ze=-107.325 Az status=0008 Ze status=0009 05:55:49 Check angles 05:55:49 SkyScan query 05:55:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.28<-20552 Statuses=0008 0009 05:55:50 Msec=3750 True Az=112.995 Ze=-128.28 Az status=0008 Ze status=0009 05:55:50 Check angles 05:55:50 SkyScan query 05:55:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.25<-21950 Statuses=0008 0009 05:55:50 Msec=4500 True Az=112.995 Ze=-149.25 Az status=0008 Ze status=0009 05:55:51 Check angles 05:55:51 SkyScan query 05:55:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 05:55:51 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 05:55:51 Check angles 05:55:51 SkyScan query 05:55:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:55:52 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:55:52 Message to Master queued w/err=0: serial=78134 error=0 05:55:57 Received message from Master: op=Filter serial=78135 05:55:57 Color wheel filter change from 0 to 0 05:55:57 FLIGetFilterPos err=0 currentPosition=0 05:55:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:57 Filter is already there-color wheel unchanged 05:55:57 Received message from Master: op=Shutter serial=78136 05:55:57 Shutter LASER open 05:55:57 Received message from Camera: op=State serial=78138 05:55:57 GetSingleValue result=40 Value=cccccccc 05:55:57 SkyScan query 05:55:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:55:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:58 Parameters OK 05:55:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:58 Set A/D data flow result=40 05:55:58 Set A/D channel type result=40 05:55:58 Set A/D encoding result=40 05:55:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:58 Set channel filter=0.000000e+000 result=40 05:55:58 Config A/D Result=40 05:55:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:58 Get A/D filter: -9.255963e+061 result=40 05:55:58 Get A/D value=-858993460 result=40 05:55:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:58 Parameters OK 05:55:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:58 Set A/D data flow result=40 05:55:58 Set A/D channel type result=40 05:55:58 Set A/D encoding result=40 05:55:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:58 Set channel filter=0.000000e+000 result=40 05:55:58 Config A/D Result=40 05:55:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:58 Get A/D filter: -9.255963e+061 result=40 05:55:58 Get A/D value=-858993460 result=40 05:55:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:58 Aux= 05:55:58 Message to Camera, serial 78138 queued 05:56:06 Received message from Master: op=Shutter serial=78148 05:56:06 Shutter LASER close 05:56:07 Received message from Master: op=PointingHead serial=78152 05:56:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:56:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:56:07 Point started: ret=0 05:56:07 point_skyscan result=0 05:56:08 Check angles 05:56:08 SkyScan query 05:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 05:56:08 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 05:56:09 Check angles 05:56:09 SkyScan query 05:56:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 05:56:09 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 05:56:09 Check angles 05:56:09 SkyScan query 05:56:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 05:56:10 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 05:56:10 Check angles 05:56:10 SkyScan query 05:56:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 05:56:11 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 05:56:11 Check angles 05:56:11 SkyScan query 05:56:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 05:56:11 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 05:56:12 Check angles 05:56:12 SkyScan query 05:56:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 05:56:12 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 05:56:12 Check angles 05:56:12 SkyScan query 05:56:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 05:56:13 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 05:56:13 Check angles 05:56:13 SkyScan query 05:56:14 SkyScan query done: ret=0 az=112.995<-7533 ze=3.69<-11754 Statuses=0008 0009 05:56:14 Msec=5250 True Az=112.995 Ze=3.69 Az status=0008 Ze status=0009 05:56:14 Check angles 05:56:14 SkyScan query 05:56:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:56:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:56:14 Message to Master queued w/err=0: serial=78152 error=0 05:56:19 Received message from Master: op=Filter serial=78153 05:56:19 Color wheel filter change from 0 to 0 05:56:19 FLIGetFilterPos err=0 currentPosition=0 05:56:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:19 Filter is already there-color wheel unchanged 05:56:20 Received message from Master: op=Shutter serial=78154 05:56:20 Shutter LASER close 05:56:20 Received message from Camera: op=State serial=78156 05:56:20 GetSingleValue result=40 Value=cccccccc 05:56:20 SkyScan query 05:56:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:56:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:20 Parameters OK 05:56:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:20 Set A/D data flow result=40 05:56:20 Set A/D channel type result=40 05:56:20 Set A/D encoding result=40 05:56:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:20 Set channel filter=0.000000e+000 result=40 05:56:20 Config A/D Result=40 05:56:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:20 Get A/D filter: -9.255963e+061 result=40 05:56:20 Get A/D value=-858993460 result=40 05:56:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:20 Parameters OK 05:56:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:20 Set A/D data flow result=40 05:56:20 Set A/D channel type result=40 05:56:20 Set A/D encoding result=40 05:56:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:20 Set channel filter=0.000000e+000 result=40 05:56:20 Config A/D Result=40 05:56:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:20 Get A/D filter: -9.255963e+061 result=40 05:56:20 Get A/D value=-858993460 result=40 05:56:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:20 Aux= 05:56:20 Message to Camera, serial 78156 queued 05:56:57 Received message from Master: op=PointingHead serial=78169 05:56:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:56:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:56:58 Point started: ret=0 05:56:58 point_skyscan result=0 05:56:58 Check angles 05:56:58 SkyScan query 05:56:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:56:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:56:59 Message to Master queued w/err=0: serial=78169 error=0 05:57:04 Received message from Master: op=Filter serial=78170 05:57:04 Color wheel filter change from 0 to 0 05:57:04 FLIGetFilterPos err=0 currentPosition=0 05:57:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:04 Filter is already there-color wheel unchanged 05:57:04 Received message from Master: op=Shutter serial=78171 05:57:04 Shutter LASER close 05:57:04 Received message from Camera: op=State serial=78173 05:57:04 GetSingleValue result=40 Value=cccccccc 05:57:04 SkyScan query 05:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:57:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:05 Parameters OK 05:57:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:05 Set A/D data flow result=40 05:57:05 Set A/D channel type result=40 05:57:05 Set A/D encoding result=40 05:57:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:05 Set channel filter=0.000000e+000 result=40 05:57:05 Config A/D Result=40 05:57:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:05 Get A/D filter: -9.255963e+061 result=40 05:57:05 Get A/D value=-858993460 result=40 05:57:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:05 Parameters OK 05:57:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:05 Set A/D data flow result=40 05:57:05 Set A/D channel type result=40 05:57:05 Set A/D encoding result=40 05:57:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:05 Set channel filter=0.000000e+000 result=40 05:57:05 Config A/D Result=40 05:57:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:05 Get A/D filter: -9.255963e+061 result=40 05:57:05 Get A/D value=-858993460 result=40 05:57:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:05 Aux= 05:57:05 Message to Camera, serial 78173 queued 05:57:42 Received message from Master: op=PointingHead serial=78186 05:57:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:57:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:57:42 Point started: ret=0 05:57:42 point_skyscan result=0 05:57:43 Check angles 05:57:43 SkyScan query 05:57:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:57:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:57:43 Message to Master queued w/err=0: serial=78186 error=0 05:57:48 Received message from Master: op=Filter serial=78187 05:57:48 Color wheel filter change from 0 to 0 05:57:48 FLIGetFilterPos err=0 currentPosition=0 05:57:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:48 Filter is already there-color wheel unchanged 05:57:48 Received message from Master: op=Shutter serial=78188 05:57:48 Shutter LASER close 05:57:49 Received message from Camera: op=State serial=78190 05:57:49 GetSingleValue result=40 Value=cccccccc 05:57:49 SkyScan query 05:57:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:57:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:49 Parameters OK 05:57:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:49 Set A/D data flow result=40 05:57:49 Set A/D channel type result=40 05:57:49 Set A/D encoding result=40 05:57:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:49 Set channel filter=0.000000e+000 result=40 05:57:49 Config A/D Result=40 05:57:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:49 Get A/D filter: -9.255963e+061 result=40 05:57:49 Get A/D value=-858993460 result=40 05:57:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:49 Parameters OK 05:57:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:49 Set A/D data flow result=40 05:57:49 Set A/D channel type result=40 05:57:49 Set A/D encoding result=40 05:57:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:49 Set channel filter=0.000000e+000 result=40 05:57:49 Config A/D Result=40 05:57:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:49 Get A/D filter: -9.255963e+061 result=40 05:57:49 Get A/D value=-858993460 result=40 05:57:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:49 Aux= 05:57:49 Message to Camera, serial 78190 queued 05:58:26 Received message from Master: op=PointingHead serial=78203 05:58:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:58:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:58:26 Point started: ret=0 05:58:26 point_skyscan result=0 05:58:27 Check angles 05:58:27 SkyScan query 05:58:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:58:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:58:28 Message to Master queued w/err=0: serial=78203 error=0 05:58:33 Received message from Master: op=Filter serial=78204 05:58:33 Color wheel filter change from 0 to 0 05:58:33 FLIGetFilterPos err=0 currentPosition=0 05:58:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:33 Filter is already there-color wheel unchanged 05:58:33 Received message from Master: op=Shutter serial=78205 05:58:33 Shutter LASER close 05:58:33 Received message from Camera: op=State serial=78207 05:58:33 GetSingleValue result=40 Value=cccccccc 05:58:33 SkyScan query 05:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:58:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:33 Parameters OK 05:58:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:33 Set A/D data flow result=40 05:58:33 Set A/D channel type result=40 05:58:33 Set A/D encoding result=40 05:58:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:33 Set channel filter=0.000000e+000 result=40 05:58:33 Config A/D Result=40 05:58:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:33 Get A/D filter: -9.255963e+061 result=40 05:58:33 Get A/D value=-858993460 result=40 05:58:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:33 Parameters OK 05:58:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:33 Set A/D data flow result=40 05:58:33 Set A/D channel type result=40 05:58:33 Set A/D encoding result=40 05:58:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:33 Set channel filter=0.000000e+000 result=40 05:58:33 Config A/D Result=40 05:58:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:33 Get A/D filter: -9.255963e+061 result=40 05:58:33 Get A/D value=-858993460 result=40 05:58:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:33 Aux= 05:58:33 Message to Camera, serial 78207 queued 05:59:10 Received message from Master: op=PointingHead serial=78220 05:59:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:59:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:59:11 Point started: ret=0 05:59:11 point_skyscan result=0 05:59:11 Check angles 05:59:11 SkyScan query 05:59:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.88<-13592 Statuses=0008 0009 05:59:12 Msec=0 True Az=112.995 Ze=-23.88 Az status=0008 Ze status=0009 05:59:12 Check angles 05:59:12 SkyScan query 05:59:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.82<-14988 Statuses=0008 0009 05:59:13 Msec=750 True Az=112.995 Ze=-44.82 Az status=0008 Ze status=0009 05:59:13 Check angles 05:59:13 SkyScan query 05:59:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 05:59:13 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 05:59:14 Check angles 05:59:14 SkyScan query 05:59:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 05:59:14 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 05:59:14 Check angles 05:59:14 SkyScan query 05:59:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 05:59:15 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 05:59:15 Check angles 05:59:15 SkyScan query 05:59:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.61<-20574 Statuses=0008 0009 05:59:16 Msec=3750 True Az=112.995 Ze=-128.61 Az status=0008 Ze status=0009 05:59:16 Check angles 05:59:16 SkyScan query 05:59:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.58<-21972 Statuses=0008 0009 05:59:16 Msec=4500 True Az=112.995 Ze=-149.58 Az status=0008 Ze status=0009 05:59:17 Check angles 05:59:17 SkyScan query 05:59:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.505<-23367 Statuses=0008 0009 05:59:17 Msec=5250 True Az=112.995 Ze=-170.505 Az status=0008 Ze status=0009 05:59:17 Check angles 05:59:17 SkyScan query 05:59:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:59:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:59:18 Message to Master queued w/err=0: serial=78220 error=0 05:59:23 Received message from Master: op=Filter serial=78221 05:59:23 Color wheel filter change from 0 to 0 05:59:23 FLIGetFilterPos err=0 currentPosition=0 05:59:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:23 Filter is already there-color wheel unchanged 05:59:23 Received message from Master: op=Shutter serial=78222 05:59:23 Shutter LASER open 05:59:23 Received message from Camera: op=State serial=78224 05:59:23 GetSingleValue result=40 Value=cccccccc 05:59:23 SkyScan query 05:59:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:59:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:24 Parameters OK 05:59:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:24 Set A/D data flow result=40 05:59:24 Set A/D channel type result=40 05:59:24 Set A/D encoding result=40 05:59:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:24 Set channel filter=0.000000e+000 result=40 05:59:24 Config A/D Result=40 05:59:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:24 Get A/D filter: -9.255963e+061 result=40 05:59:24 Get A/D value=-858993460 result=40 05:59:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:24 Parameters OK 05:59:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:24 Set A/D data flow result=40 05:59:24 Set A/D channel type result=40 05:59:24 Set A/D encoding result=40 05:59:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:24 Set channel filter=0.000000e+000 result=40 05:59:24 Config A/D Result=40 05:59:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:24 Get A/D filter: -9.255963e+061 result=40 05:59:24 Get A/D value=-858993460 result=40 05:59:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:24 Aux= 05:59:24 Message to Camera, serial 78224 queued 05:59:32 Received message from Master: op=Shutter serial=78234 05:59:32 Shutter LASER close 05:59:33 Received message from Master: op=PointingHead serial=78238 05:59:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:59:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:59:33 Point started: ret=0 05:59:33 point_skyscan result=0 05:59:34 Check angles 05:59:34 SkyScan query 05:59:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 05:59:35 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 05:59:35 Check angles 05:59:35 SkyScan query 05:59:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 05:59:35 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 05:59:35 Check angles 05:59:35 SkyScan query 05:59:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.83<-18722 Statuses=0008 0009 05:59:36 Msec=1500 True Az=112.995 Ze=-100.83 Az status=0008 Ze status=0009 05:59:36 Check angles 05:59:36 SkyScan query 05:59:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 05:59:37 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 05:59:37 Check angles 05:59:37 SkyScan query 05:59:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 05:59:38 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 05:59:38 Check angles 05:59:38 SkyScan query 05:59:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.95<-14530 Statuses=0008 0009 05:59:38 Msec=3750 True Az=112.995 Ze=-37.95 Az status=0008 Ze status=0009 05:59:38 Check angles 05:59:38 SkyScan query 05:59:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.995<-13133 Statuses=0008 0009 05:59:39 Msec=4500 True Az=112.995 Ze=-16.995 Az status=0008 Ze status=0009 05:59:39 Check angles 05:59:39 SkyScan query 05:59:40 SkyScan query done: ret=0 az=112.995<-7533 ze=3.945<-11737 Statuses=0008 0009 05:59:40 Msec=5250 True Az=112.995 Ze=3.945 Az status=0008 Ze status=0009 05:59:40 Check angles 05:59:40 SkyScan query 05:59:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:59:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:59:41 Message to Master queued w/err=0: serial=78238 error=0 05:59:46 Received message from Master: op=Filter serial=78239 05:59:46 Color wheel filter change from 0 to 0 05:59:46 FLIGetFilterPos err=0 currentPosition=0 05:59:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:46 Filter is already there-color wheel unchanged 05:59:46 Received message from Master: op=Shutter serial=78240 05:59:46 Shutter LASER close 05:59:46 Received message from Camera: op=State serial=78242 05:59:46 GetSingleValue result=40 Value=cccccccc 05:59:46 SkyScan query 05:59:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:59:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:46 Parameters OK 05:59:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:46 Set A/D data flow result=40 05:59:46 Set A/D channel type result=40 05:59:46 Set A/D encoding result=40 05:59:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:46 Set channel filter=0.000000e+000 result=40 05:59:46 Config A/D Result=40 05:59:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:46 Get A/D filter: -9.255963e+061 result=40 05:59:46 Get A/D value=-858993460 result=40 05:59:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:46 Parameters OK 05:59:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:46 Set A/D data flow result=40 05:59:46 Set A/D channel type result=40 05:59:46 Set A/D encoding result=40 05:59:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:46 Set channel filter=0.000000e+000 result=40 05:59:46 Config A/D Result=40 05:59:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:46 Get A/D filter: -9.255963e+061 result=40 05:59:46 Get A/D value=-858993460 result=40 05:59:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:46 Aux= 05:59:46 Message to Camera, serial 78242 queued 06:00:23 Received message from Master: op=PointingHead serial=78255 06:00:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:00:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:00:24 Point started: ret=0 06:00:24 point_skyscan result=0 06:00:24 Check angles 06:00:24 SkyScan query 06:00:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:00:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:00:25 Message to Master queued w/err=0: serial=78255 error=0 06:00:30 Received message from Master: op=Filter serial=78256 06:00:30 Color wheel filter change from 0 to 0 06:00:30 FLIGetFilterPos err=0 currentPosition=0 06:00:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:30 Filter is already there-color wheel unchanged 06:00:30 Received message from Master: op=Shutter serial=78257 06:00:30 Shutter LASER close 06:00:30 Received message from Camera: op=State serial=78259 06:00:30 GetSingleValue result=40 Value=cccccccc 06:00:30 SkyScan query 06:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:00:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:31 Parameters OK 06:00:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:31 Set A/D data flow result=40 06:00:31 Set A/D channel type result=40 06:00:31 Set A/D encoding result=40 06:00:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:31 Set channel filter=0.000000e+000 result=40 06:00:31 Config A/D Result=40 06:00:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:31 Get A/D filter: -9.255963e+061 result=40 06:00:31 Get A/D value=-858993460 result=40 06:00:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:31 Parameters OK 06:00:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:31 Set A/D data flow result=40 06:00:31 Set A/D channel type result=40 06:00:31 Set A/D encoding result=40 06:00:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:31 Set channel filter=0.000000e+000 result=40 06:00:31 Config A/D Result=40 06:00:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:31 Get A/D filter: -9.255963e+061 result=40 06:00:31 Get A/D value=-858993460 result=40 06:00:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:31 Aux= 06:00:31 Message to Camera, serial 78259 queued 06:01:08 Received message from Master: op=PointingHead serial=78272 06:01:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:01:08 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:01:08 Point started: ret=0 06:01:08 point_skyscan result=0 06:01:09 Check angles 06:01:09 SkyScan query 06:01:09 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 06:01:09 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 06:01:09 Check angles 06:01:09 SkyScan query 06:01:10 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.495<-12433 Statuses=0009 0008 06:01:10 Msec=750 True Az=153.51 Ze=-6.495 Az status=0009 Ze status=0008 06:01:10 Check angles 06:01:10 SkyScan query 06:01:11 SkyScan query done: ret=0 az=170.97<-11398 ze=-6.495<-12433 Statuses=0009 0008 06:01:11 Msec=1500 True Az=170.97 Ze=-6.495 Az status=0009 Ze status=0008 06:01:11 Check angles 06:01:11 SkyScan query 06:01:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:01:12 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:01:12 Message to Master queued w/err=0: serial=78272 error=0 06:01:17 Received message from Master: op=Filter serial=78273 06:01:17 Color wheel filter change from 0 to 0 06:01:17 FLIGetFilterPos err=0 currentPosition=0 06:01:17 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:17 Filter is already there-color wheel unchanged 06:01:17 Received message from Master: op=Shutter serial=78274 06:01:17 Shutter LASER close 06:01:17 Received message from Camera: op=State serial=78276 06:01:17 GetSingleValue result=40 Value=cccccccc 06:01:17 SkyScan query 06:01:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:01:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:17 Parameters OK 06:01:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:17 Set A/D data flow result=40 06:01:17 Set A/D channel type result=40 06:01:17 Set A/D encoding result=40 06:01:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:17 Set channel filter=0.000000e+000 result=40 06:01:17 Config A/D Result=40 06:01:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:17 Get A/D filter: -9.255963e+061 result=40 06:01:17 Get A/D value=-858993460 result=40 06:01:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:17 Parameters OK 06:01:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:17 Set A/D data flow result=40 06:01:17 Set A/D channel type result=40 06:01:17 Set A/D encoding result=40 06:01:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:17 Set channel filter=0.000000e+000 result=40 06:01:17 Config A/D Result=40 06:01:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:17 Get A/D filter: -9.255963e+061 result=40 06:01:17 Get A/D value=-858993460 result=40 06:01:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:17 Aux= 06:01:17 Message to Camera, serial 78276 queued 06:01:54 Received message from Master: op=PointingHead serial=78289 06:01:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:01:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:01:55 Point started: ret=0 06:01:55 point_skyscan result=0 06:01:55 Check angles 06:01:55 SkyScan query 06:01:56 SkyScan query done: ret=0 az=152.82<-10188 ze=6.51<-11566 Statuses=0009 0008 06:01:56 Msec=0 True Az=152.82 Ze=6.51 Az status=0009 Ze status=0008 06:01:56 Check angles 06:01:56 SkyScan query 06:01:57 SkyScan query done: ret=0 az=134.955<-8997 ze=6.495<-11567 Statuses=0009 0008 06:01:57 Msec=750 True Az=134.955 Ze=6.495 Az status=0009 Ze status=0008 06:01:57 Check angles 06:01:57 SkyScan query 06:01:57 SkyScan query done: ret=0 az=117.555<-7837 ze=6.495<-11567 Statuses=0009 0008 06:01:57 Msec=1500 True Az=117.555 Ze=6.495 Az status=0009 Ze status=0008 06:01:58 Check angles 06:01:58 SkyScan query 06:01:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:01:58 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:01:58 Message to Master queued w/err=0: serial=78289 error=0 06:02:03 Received message from Master: op=Filter serial=78290 06:02:03 Color wheel filter change from 0 to 0 06:02:03 FLIGetFilterPos err=0 currentPosition=0 06:02:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:03 Filter is already there-color wheel unchanged 06:02:03 Received message from Master: op=Shutter serial=78291 06:02:03 Shutter LASER close 06:02:03 Received message from Camera: op=State serial=78293 06:02:03 GetSingleValue result=40 Value=cccccccc 06:02:03 SkyScan query 06:02:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:02:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:04 Parameters OK 06:02:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:04 Set A/D data flow result=40 06:02:04 Set A/D channel type result=40 06:02:04 Set A/D encoding result=40 06:02:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:04 Set channel filter=0.000000e+000 result=40 06:02:04 Config A/D Result=40 06:02:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:04 Get A/D filter: -9.255963e+061 result=40 06:02:04 Get A/D value=-858993460 result=40 06:02:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:04 Parameters OK 06:02:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:04 Set A/D data flow result=40 06:02:04 Set A/D channel type result=40 06:02:04 Set A/D encoding result=40 06:02:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:04 Set channel filter=0.000000e+000 result=40 06:02:04 Config A/D Result=40 06:02:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:04 Get A/D filter: -9.255963e+061 result=40 06:02:04 Get A/D value=-858993460 result=40 06:02:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:04 Aux= 06:02:04 Message to Camera, serial 78293 queued 06:02:41 Received message from Master: op=PointingHead serial=78306 06:02:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:02:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:02:41 Point started: ret=0 06:02:41 point_skyscan result=0 06:02:42 Check angles 06:02:42 SkyScan query 06:02:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 06:02:43 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 06:02:43 Check angles 06:02:43 SkyScan query 06:02:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 06:02:43 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 06:02:43 Check angles 06:02:43 SkyScan query 06:02:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 06:02:44 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 06:02:44 Check angles 06:02:44 SkyScan query 06:02:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 06:02:45 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 06:02:45 Check angles 06:02:45 SkyScan query 06:02:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.015<-19201 Statuses=0008 0009 06:02:46 Msec=3000 True Az=112.995 Ze=-108.015 Az status=0008 Ze status=0009 06:02:46 Check angles 06:02:46 SkyScan query 06:02:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.405<-20627 Statuses=0008 0009 06:02:46 Msec=3750 True Az=112.995 Ze=-129.405 Az status=0008 Ze status=0009 06:02:46 Check angles 06:02:46 SkyScan query 06:02:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 06:02:47 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 06:02:47 Check angles 06:02:47 SkyScan query 06:02:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 06:02:48 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 06:02:48 Check angles 06:02:48 SkyScan query 06:02:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:02:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:02:49 Message to Master queued w/err=0: serial=78306 error=0 06:02:54 Received message from Master: op=Filter serial=78307 06:02:54 Color wheel filter change from 0 to 0 06:02:54 FLIGetFilterPos err=0 currentPosition=0 06:02:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:54 Filter is already there-color wheel unchanged 06:02:54 Received message from Master: op=Shutter serial=78308 06:02:54 Shutter LASER open 06:02:54 Received message from Camera: op=State serial=78310 06:02:54 GetSingleValue result=40 Value=cccccccc 06:02:54 SkyScan query 06:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:02:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:54 Parameters OK 06:02:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:54 Set A/D data flow result=40 06:02:54 Set A/D channel type result=40 06:02:54 Set A/D encoding result=40 06:02:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:54 Set channel filter=0.000000e+000 result=40 06:02:54 Config A/D Result=40 06:02:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:54 Get A/D filter: -9.255963e+061 result=40 06:02:54 Get A/D value=-858993460 result=40 06:02:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:54 Parameters OK 06:02:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:54 Set A/D data flow result=40 06:02:54 Set A/D channel type result=40 06:02:54 Set A/D encoding result=40 06:02:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:54 Set channel filter=0.000000e+000 result=40 06:02:54 Config A/D Result=40 06:02:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:54 Get A/D filter: -9.255963e+061 result=40 06:02:54 Get A/D value=-858993460 result=40 06:02:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:54 Aux= 06:02:54 Message to Camera, serial 78310 queued 06:03:03 Received message from Master: op=Shutter serial=78320 06:03:03 Shutter LASER close 06:03:03 Received message from Master: op=PointingHead serial=78324 06:03:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:03:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:03:04 Point started: ret=0 06:03:04 point_skyscan result=0 06:03:04 Check angles 06:03:04 SkyScan query 06:03:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.13<-21542 Statuses=0008 0009 06:03:05 Msec=0 True Az=112.995 Ze=-143.13 Az status=0008 Ze status=0009 06:03:05 Check angles 06:03:05 SkyScan query 06:03:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 06:03:06 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 06:03:06 Check angles 06:03:06 SkyScan query 06:03:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 06:03:07 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 06:03:07 Check angles 06:03:07 SkyScan query 06:03:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.845<-17323 Statuses=0008 0009 06:03:07 Msec=2250 True Az=112.995 Ze=-79.845 Az status=0008 Ze status=0009 06:03:07 Check angles 06:03:07 SkyScan query 06:03:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.89<-15926 Statuses=0008 0009 06:03:08 Msec=3000 True Az=112.995 Ze=-58.89 Az status=0008 Ze status=0009 06:03:08 Check angles 06:03:08 SkyScan query 06:03:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.5<-14500 Statuses=0008 0009 06:03:09 Msec=3750 True Az=112.995 Ze=-37.5 Az status=0008 Ze status=0009 06:03:09 Check angles 06:03:09 SkyScan query 06:03:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.095<-13073 Statuses=0008 0009 06:03:10 Msec=4500 True Az=112.995 Ze=-16.095 Az status=0008 Ze status=0009 06:03:10 Check angles 06:03:10 SkyScan query 06:03:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.695<-11687 Statuses=0008 0009 06:03:10 Msec=5250 True Az=112.995 Ze=4.695 Az status=0008 Ze status=0009 06:03:10 Check angles 06:03:10 SkyScan query 06:03:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:03:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:03:11 Message to Master queued w/err=0: serial=78324 error=0 06:03:16 Received message from Master: op=Filter serial=78325 06:03:16 Color wheel filter change from 0 to 0 06:03:16 FLIGetFilterPos err=0 currentPosition=0 06:03:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:16 Filter is already there-color wheel unchanged 06:03:16 Received message from Master: op=Shutter serial=78326 06:03:16 Shutter LASER close 06:03:16 Received message from Camera: op=State serial=78328 06:03:16 GetSingleValue result=40 Value=cccccccc 06:03:16 SkyScan query 06:03:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:03:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:17 Parameters OK 06:03:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:17 Set A/D data flow result=40 06:03:17 Set A/D channel type result=40 06:03:17 Set A/D encoding result=40 06:03:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:17 Set channel filter=0.000000e+000 result=40 06:03:17 Config A/D Result=40 06:03:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:17 Get A/D filter: -9.255963e+061 result=40 06:03:17 Get A/D value=-858993460 result=40 06:03:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:17 Parameters OK 06:03:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:17 Set A/D data flow result=40 06:03:17 Set A/D channel type result=40 06:03:17 Set A/D encoding result=40 06:03:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:17 Set channel filter=0.000000e+000 result=40 06:03:17 Config A/D Result=40 06:03:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:17 Get A/D filter: -9.255963e+061 result=40 06:03:17 Get A/D value=-858993460 result=40 06:03:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:17 Aux= 06:03:17 Message to Camera, serial 78328 queued 06:03:38 Received message from Master: op=Identify serial=78329 [UTC 2019-3-3 06:03:50] 06:03:54 Received message from Master: op=PointingHead serial=78344 06:03:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:03:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:03:54 Point started: ret=0 06:03:54 point_skyscan result=0 06:03:55 Check angles 06:03:55 SkyScan query 06:03:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:03:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:03:55 Message to Master queued w/err=0: serial=78344 error=0 06:04:00 Received message from Master: op=Filter serial=78345 06:04:00 Color wheel filter change from 0 to 0 06:04:00 FLIGetFilterPos err=0 currentPosition=0 06:04:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:00 Filter is already there-color wheel unchanged 06:04:01 Received message from Master: op=Shutter serial=78346 06:04:01 Shutter LASER close 06:04:01 Received message from Camera: op=State serial=78348 06:04:01 GetSingleValue result=40 Value=cccccccc 06:04:01 SkyScan query 06:04:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:04:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:01 Parameters OK 06:04:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:01 Set A/D data flow result=40 06:04:01 Set A/D channel type result=40 06:04:01 Set A/D encoding result=40 06:04:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:01 Set channel filter=0.000000e+000 result=40 06:04:01 Config A/D Result=40 06:04:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:01 Get A/D filter: -9.255963e+061 result=40 06:04:01 Get A/D value=-858993460 result=40 06:04:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:01 Parameters OK 06:04:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:01 Set A/D data flow result=40 06:04:01 Set A/D channel type result=40 06:04:01 Set A/D encoding result=40 06:04:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:01 Set channel filter=0.000000e+000 result=40 06:04:01 Config A/D Result=40 06:04:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:01 Get A/D filter: -9.255963e+061 result=40 06:04:01 Get A/D value=-858993460 result=40 06:04:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:01 Aux= 06:04:01 Message to Camera, serial 78348 queued 06:04:38 Received message from Master: op=PointingHead serial=78361 06:04:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:04:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:04:38 Point started: ret=0 06:04:38 point_skyscan result=0 06:04:39 Check angles 06:04:39 SkyScan query 06:04:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:04:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:04:40 Message to Master queued w/err=0: serial=78361 error=0 06:04:45 Received message from Master: op=Filter serial=78362 06:04:45 Color wheel filter change from 0 to 0 06:04:45 FLIGetFilterPos err=0 currentPosition=0 06:04:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:45 Filter is already there-color wheel unchanged 06:04:45 Received message from Master: op=Shutter serial=78363 06:04:45 Shutter LASER close 06:04:45 Received message from Camera: op=State serial=78365 06:04:45 GetSingleValue result=40 Value=cccccccc 06:04:45 SkyScan query 06:04:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:04:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:46 Parameters OK 06:04:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:46 Set A/D data flow result=40 06:04:46 Set A/D channel type result=40 06:04:46 Set A/D encoding result=40 06:04:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:46 Set channel filter=0.000000e+000 result=40 06:04:46 Config A/D Result=40 06:04:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:46 Get A/D filter: -9.255963e+061 result=40 06:04:46 Get A/D value=-858993460 result=40 06:04:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:46 Parameters OK 06:04:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:46 Set A/D data flow result=40 06:04:46 Set A/D channel type result=40 06:04:46 Set A/D encoding result=40 06:04:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:46 Set channel filter=0.000000e+000 result=40 06:04:46 Config A/D Result=40 06:04:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:46 Get A/D filter: -9.255963e+061 result=40 06:04:46 Get A/D value=-858993460 result=40 06:04:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:46 Aux= 06:04:46 Message to Camera, serial 78365 queued 06:05:22 Received message from Master: op=PointingHead serial=78378 06:05:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:05:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:05:23 Point started: ret=0 06:05:23 point_skyscan result=0 06:05:23 Check angles 06:05:23 SkyScan query 06:05:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:05:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:05:24 Message to Master queued w/err=0: serial=78378 error=0 06:05:29 Received message from Master: op=Filter serial=78379 06:05:29 Color wheel filter change from 0 to 0 06:05:29 FLIGetFilterPos err=0 currentPosition=0 06:05:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:29 Filter is already there-color wheel unchanged 06:05:29 Received message from Master: op=Shutter serial=78380 06:05:29 Shutter LASER close 06:05:29 Received message from Camera: op=State serial=78382 06:05:29 GetSingleValue result=40 Value=cccccccc 06:05:29 SkyScan query 06:05:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:05:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:30 Parameters OK 06:05:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:30 Set A/D data flow result=40 06:05:30 Set A/D channel type result=40 06:05:30 Set A/D encoding result=40 06:05:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:30 Set channel filter=0.000000e+000 result=40 06:05:30 Config A/D Result=40 06:05:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:30 Get A/D filter: -9.255963e+061 result=40 06:05:30 Get A/D value=-858993460 result=40 06:05:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:30 Parameters OK 06:05:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:30 Set A/D data flow result=40 06:05:30 Set A/D channel type result=40 06:05:30 Set A/D encoding result=40 06:05:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:30 Set channel filter=0.000000e+000 result=40 06:05:30 Config A/D Result=40 06:05:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:30 Get A/D filter: -9.255963e+061 result=40 06:05:30 Get A/D value=-858993460 result=40 06:05:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:30 Aux= 06:05:30 Message to Camera, serial 78382 queued 06:06:07 Received message from Master: op=PointingHead serial=78395 06:06:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:06:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:06:07 Point started: ret=0 06:06:07 point_skyscan result=0 06:06:08 Check angles 06:06:08 SkyScan query 06:06:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 06:06:08 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 06:06:09 Check angles 06:06:09 SkyScan query 06:06:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 06:06:09 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 06:06:09 Check angles 06:06:09 SkyScan query 06:06:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.775<-16385 Statuses=0008 0009 06:06:10 Msec=1500 True Az=112.995 Ze=-65.775 Az status=0008 Ze status=0009 06:06:10 Check angles 06:06:10 SkyScan query 06:06:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.7<-17780 Statuses=0008 0009 06:06:11 Msec=2250 True Az=112.995 Ze=-86.7 Az status=0008 Ze status=0009 06:06:11 Check angles 06:06:11 SkyScan query 06:06:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 06:06:11 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 06:06:12 Check angles 06:06:12 SkyScan query 06:06:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 06:06:12 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 06:06:12 Check angles 06:06:12 SkyScan query 06:06:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.985<-21999 Statuses=0008 0009 06:06:13 Msec=4500 True Az=112.995 Ze=-149.985 Az status=0008 Ze status=0009 06:06:13 Check angles 06:06:13 SkyScan query 06:06:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 06:06:14 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 06:06:14 Check angles 06:06:14 SkyScan query 06:06:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:06:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:06:14 Message to Master queued w/err=0: serial=78395 error=0 06:06:19 Received message from Master: op=Filter serial=78396 06:06:19 Color wheel filter change from 0 to 0 06:06:19 FLIGetFilterPos err=0 currentPosition=0 06:06:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:19 Filter is already there-color wheel unchanged 06:06:20 Received message from Master: op=Shutter serial=78397 06:06:20 Shutter LASER open 06:06:20 Received message from Camera: op=State serial=78399 06:06:20 GetSingleValue result=40 Value=cccccccc 06:06:20 SkyScan query 06:06:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:06:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:20 Parameters OK 06:06:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:20 Set A/D data flow result=40 06:06:20 Set A/D channel type result=40 06:06:20 Set A/D encoding result=40 06:06:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:20 Set channel filter=0.000000e+000 result=40 06:06:20 Config A/D Result=40 06:06:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:20 Get A/D filter: -9.255963e+061 result=40 06:06:20 Get A/D value=-858993460 result=40 06:06:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:20 Parameters OK 06:06:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:20 Set A/D data flow result=40 06:06:20 Set A/D channel type result=40 06:06:20 Set A/D encoding result=40 06:06:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:20 Set channel filter=0.000000e+000 result=40 06:06:20 Config A/D Result=40 06:06:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:20 Get A/D filter: -9.255963e+061 result=40 06:06:20 Get A/D value=-858993460 result=40 06:06:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:20 Aux= 06:06:20 Message to Camera, serial 78399 queued 06:06:29 Received message from Master: op=Shutter serial=78409 06:06:29 Shutter LASER close 06:06:29 Received message from Master: op=PointingHead serial=78413 06:06:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:06:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:06:30 Point started: ret=0 06:06:30 point_skyscan result=0 06:06:30 Check angles 06:06:30 SkyScan query 06:06:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.13<-21542 Statuses=0008 0009 06:06:31 Msec=0 True Az=112.995 Ze=-143.13 Az status=0008 Ze status=0009 06:06:31 Check angles 06:06:31 SkyScan query 06:06:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.16<-20144 Statuses=0008 0009 06:06:32 Msec=750 True Az=112.995 Ze=-122.16 Az status=0008 Ze status=0009 06:06:32 Check angles 06:06:32 SkyScan query 06:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 06:06:33 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 06:06:33 Check angles 06:06:33 SkyScan query 06:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.265<-17351 Statuses=0008 0009 06:06:33 Msec=2250 True Az=112.995 Ze=-80.265 Az status=0008 Ze status=0009 06:06:33 Check angles 06:06:33 SkyScan query 06:06:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.325<-15955 Statuses=0008 0009 06:06:34 Msec=3000 True Az=112.995 Ze=-59.325 Az status=0008 Ze status=0009 06:06:34 Check angles 06:06:34 SkyScan query 06:06:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.34<-14556 Statuses=0008 0009 06:06:35 Msec=3750 True Az=112.995 Ze=-38.34 Az status=0008 Ze status=0009 06:06:35 Check angles 06:06:35 SkyScan query 06:06:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.4<-13160 Statuses=0008 0009 06:06:36 Msec=4500 True Az=112.995 Ze=-17.4 Az status=0008 Ze status=0009 06:06:36 Check angles 06:06:36 SkyScan query 06:06:36 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 06:06:36 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 06:06:36 Check angles 06:06:36 SkyScan query 06:06:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:06:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:06:37 Message to Master queued w/err=0: serial=78413 error=0 06:06:42 Received message from Master: op=Filter serial=78414 06:06:42 Color wheel filter change from 0 to 0 06:06:42 FLIGetFilterPos err=0 currentPosition=0 06:06:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:42 Filter is already there-color wheel unchanged 06:06:42 Received message from Master: op=Shutter serial=78415 06:06:42 Shutter LASER close 06:06:42 Received message from Camera: op=State serial=78417 06:06:42 GetSingleValue result=40 Value=cccccccc 06:06:42 SkyScan query 06:06:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:06:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:43 Parameters OK 06:06:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:43 Set A/D data flow result=40 06:06:43 Set A/D channel type result=40 06:06:43 Set A/D encoding result=40 06:06:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:43 Set channel filter=0.000000e+000 result=40 06:06:43 Config A/D Result=40 06:06:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:43 Get A/D filter: -9.255963e+061 result=40 06:06:43 Get A/D value=-858993460 result=40 06:06:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:43 Parameters OK 06:06:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:43 Set A/D data flow result=40 06:06:43 Set A/D channel type result=40 06:06:43 Set A/D encoding result=40 06:06:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:43 Set channel filter=0.000000e+000 result=40 06:06:43 Config A/D Result=40 06:06:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:43 Get A/D filter: -9.255963e+061 result=40 06:06:43 Get A/D value=-858993460 result=40 06:06:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:43 Aux= 06:06:43 Message to Camera, serial 78417 queued 06:07:19 Received message from Master: op=PointingHead serial=78429 06:07:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:07:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:07:19 Point started: ret=0 06:07:19 point_skyscan result=0 06:07:20 Check angles 06:07:20 SkyScan query 06:07:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:07:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:07:21 Message to Master queued w/err=0: serial=78429 error=0 06:07:26 Received message from Master: op=Filter serial=78430 06:07:26 Color wheel filter change from 0 to 0 06:07:26 FLIGetFilterPos err=0 currentPosition=0 06:07:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:26 Filter is already there-color wheel unchanged 06:07:26 Received message from Master: op=Shutter serial=78431 06:07:26 Shutter LASER close 06:07:26 Received message from Camera: op=State serial=78433 06:07:26 GetSingleValue result=40 Value=cccccccc 06:07:26 SkyScan query 06:07:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:07:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:26 Parameters OK 06:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:26 Set A/D data flow result=40 06:07:26 Set A/D channel type result=40 06:07:26 Set A/D encoding result=40 06:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:26 Set channel filter=0.000000e+000 result=40 06:07:26 Config A/D Result=40 06:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:26 Get A/D filter: -9.255963e+061 result=40 06:07:26 Get A/D value=-858993460 result=40 06:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:26 Parameters OK 06:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:26 Set A/D data flow result=40 06:07:26 Set A/D channel type result=40 06:07:26 Set A/D encoding result=40 06:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:26 Set channel filter=0.000000e+000 result=40 06:07:26 Config A/D Result=40 06:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:26 Get A/D filter: -9.255963e+061 result=40 06:07:26 Get A/D value=-858993460 result=40 06:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:26 Aux= 06:07:26 Message to Camera, serial 78433 queued 06:08:03 Received message from Master: op=PointingHead serial=78446 06:08:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:08:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:08:04 Point started: ret=0 06:08:04 point_skyscan result=0 06:08:04 Check angles 06:08:04 SkyScan query 06:08:05 SkyScan query done: ret=0 az=136.455<-9097 ze=-6.51<-12434 Statuses=0009 0008 06:08:05 Msec=0 True Az=136.455 Ze=-6.51 Az status=0009 Ze status=0008 06:08:05 Check angles 06:08:05 SkyScan query 06:08:06 SkyScan query done: ret=0 az=153.96<-10264 ze=-6.495<-12433 Statuses=0009 0008 06:08:06 Msec=750 True Az=153.96 Ze=-6.495 Az status=0009 Ze status=0008 06:08:06 Check angles 06:08:06 SkyScan query 06:08:06 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 06:08:06 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 06:08:07 Check angles 06:08:07 SkyScan query 06:08:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:08:07 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:08:07 Message to Master queued w/err=0: serial=78446 error=0 06:08:12 Received message from Master: op=Filter serial=78447 06:08:12 Color wheel filter change from 0 to 0 06:08:12 FLIGetFilterPos err=0 currentPosition=0 06:08:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:12 Filter is already there-color wheel unchanged 06:08:12 Received message from Master: op=Shutter serial=78448 06:08:12 Shutter LASER close 06:08:12 Received message from Camera: op=State serial=78450 06:08:12 GetSingleValue result=40 Value=cccccccc 06:08:12 SkyScan query 06:08:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:08:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:13 Parameters OK 06:08:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:13 Set A/D data flow result=40 06:08:13 Set A/D channel type result=40 06:08:13 Set A/D encoding result=40 06:08:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:13 Set channel filter=0.000000e+000 result=40 06:08:13 Config A/D Result=40 06:08:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:13 Get A/D filter: -9.255963e+061 result=40 06:08:13 Get A/D value=-858993460 result=40 06:08:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:13 Parameters OK 06:08:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:13 Set A/D data flow result=40 06:08:13 Set A/D channel type result=40 06:08:13 Set A/D encoding result=40 06:08:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:13 Set channel filter=0.000000e+000 result=40 06:08:13 Config A/D Result=40 06:08:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:13 Get A/D filter: -9.255963e+061 result=40 06:08:13 Get A/D value=-858993460 result=40 06:08:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:13 Aux= 06:08:13 Message to Camera, serial 78450 queued 06:08:50 Received message from Master: op=PointingHead serial=78463 06:08:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:08:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:08:50 Point started: ret=0 06:08:50 point_skyscan result=0 06:08:51 Check angles 06:08:51 SkyScan query 06:08:51 SkyScan query done: ret=0 az=152.52<-10168 ze=6.51<-11566 Statuses=0009 0008 06:08:51 Msec=0 True Az=152.52 Ze=6.51 Az status=0009 Ze status=0008 06:08:52 Check angles 06:08:52 SkyScan query 06:08:52 SkyScan query done: ret=0 az=135<-9000 ze=6.495<-11567 Statuses=0009 0008 06:08:52 Msec=750 True Az=135 Ze=6.495 Az status=0009 Ze status=0008 06:08:52 Check angles 06:08:52 SkyScan query 06:08:53 SkyScan query done: ret=0 az=117.615<-7841 ze=6.495<-11567 Statuses=0009 0008 06:08:53 Msec=1500 True Az=117.615 Ze=6.495 Az status=0009 Ze status=0008 06:08:53 Check angles 06:08:53 SkyScan query 06:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:08:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:08:54 Message to Master queued w/err=0: serial=78463 error=0 06:08:59 Received message from Master: op=Filter serial=78464 06:08:59 Color wheel filter change from 0 to 0 06:08:59 FLIGetFilterPos err=0 currentPosition=0 06:08:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:59 Filter is already there-color wheel unchanged 06:08:59 Received message from Master: op=Shutter serial=78465 06:08:59 Shutter LASER close 06:08:59 Received message from Camera: op=State serial=78467 06:08:59 GetSingleValue result=40 Value=cccccccc 06:08:59 SkyScan query 06:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:08:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:59 Parameters OK 06:08:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:59 Set A/D data flow result=40 06:08:59 Set A/D channel type result=40 06:08:59 Set A/D encoding result=40 06:08:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:59 Set channel filter=0.000000e+000 result=40 06:08:59 Config A/D Result=40 06:08:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:59 Get A/D filter: -9.255963e+061 result=40 06:08:59 Get A/D value=-858993460 result=40 06:08:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:59 Parameters OK 06:08:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:59 Set A/D data flow result=40 06:08:59 Set A/D channel type result=40 06:08:59 Set A/D encoding result=40 06:08:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:59 Set channel filter=0.000000e+000 result=40 06:08:59 Config A/D Result=40 06:08:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:59 Get A/D filter: -9.255963e+061 result=40 06:08:59 Get A/D value=-858993460 result=40 06:08:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:59 Aux= 06:08:59 Message to Camera, serial 78467 queued 06:09:36 Received message from Master: op=PointingHead serial=78480 06:09:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:09:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:09:37 Point started: ret=0 06:09:37 point_skyscan result=0 06:09:37 Check angles 06:09:37 SkyScan query 06:09:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 06:09:38 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 06:09:38 Check angles 06:09:38 SkyScan query 06:09:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.235<-14949 Statuses=0008 0009 06:09:39 Msec=750 True Az=112.995 Ze=-44.235 Az status=0008 Ze status=0009 06:09:39 Check angles 06:09:39 SkyScan query 06:09:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 06:09:39 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 06:09:40 Check angles 06:09:40 SkyScan query 06:09:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 06:09:40 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 06:09:40 Check angles 06:09:40 SkyScan query 06:09:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 06:09:41 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 06:09:41 Check angles 06:09:41 SkyScan query 06:09:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 06:09:42 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 06:09:42 Check angles 06:09:42 SkyScan query 06:09:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 06:09:43 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 06:09:43 Check angles 06:09:43 SkyScan query 06:09:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 06:09:43 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 06:09:43 Check angles 06:09:43 SkyScan query 06:09:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:09:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:09:44 Message to Master queued w/err=0: serial=78480 error=0 06:09:49 Received message from Master: op=Filter serial=78481 06:09:49 Color wheel filter change from 0 to 0 06:09:49 FLIGetFilterPos err=0 currentPosition=0 06:09:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:49 Filter is already there-color wheel unchanged 06:09:49 Received message from Master: op=Shutter serial=78482 06:09:49 Shutter LASER open 06:09:49 Received message from Camera: op=State serial=78484 06:09:49 GetSingleValue result=40 Value=cccccccc 06:09:49 SkyScan query 06:09:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:09:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:50 Parameters OK 06:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:50 Set A/D data flow result=40 06:09:50 Set A/D channel type result=40 06:09:50 Set A/D encoding result=40 06:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:50 Set channel filter=0.000000e+000 result=40 06:09:50 Config A/D Result=40 06:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:50 Get A/D filter: -9.255963e+061 result=40 06:09:50 Get A/D value=-858993460 result=40 06:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:50 Parameters OK 06:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:50 Set A/D data flow result=40 06:09:50 Set A/D channel type result=40 06:09:50 Set A/D encoding result=40 06:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:50 Set channel filter=0.000000e+000 result=40 06:09:50 Config A/D Result=40 06:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:50 Get A/D filter: -9.255963e+061 result=40 06:09:50 Get A/D value=-858993460 result=40 06:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:50 Aux= 06:09:50 Message to Camera, serial 78484 queued 06:09:58 Received message from Master: op=Shutter serial=78494 06:09:58 Shutter LASER close 06:09:59 Received message from Master: op=PointingHead serial=78498 06:09:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:09:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:09:59 Point started: ret=0 06:09:59 point_skyscan result=0 06:10:00 Check angles 06:10:00 SkyScan query 06:10:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 06:10:00 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 06:10:01 Check angles 06:10:01 SkyScan query 06:10:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 06:10:01 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 06:10:01 Check angles 06:10:01 SkyScan query 06:10:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 06:10:02 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 06:10:02 Check angles 06:10:02 SkyScan query 06:10:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 06:10:03 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 06:10:03 Check angles 06:10:03 SkyScan query 06:10:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 06:10:03 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 06:10:04 Check angles 06:10:04 SkyScan query 06:10:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 06:10:04 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 06:10:04 Check angles 06:10:04 SkyScan query 06:10:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.115<-13141 Statuses=0008 0009 06:10:05 Msec=4500 True Az=112.995 Ze=-17.115 Az status=0008 Ze status=0009 06:10:05 Check angles 06:10:05 SkyScan query 06:10:06 SkyScan query done: ret=0 az=112.995<-7533 ze=4.26<-11716 Statuses=0008 0009 06:10:06 Msec=5250 True Az=112.995 Ze=4.26 Az status=0008 Ze status=0009 06:10:06 Check angles 06:10:06 SkyScan query 06:10:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:10:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:10:06 Message to Master queued w/err=0: serial=78498 error=0 06:10:11 Received message from Master: op=Filter serial=78499 06:10:11 Color wheel filter change from 0 to 0 06:10:11 FLIGetFilterPos err=0 currentPosition=0 06:10:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:11 Filter is already there-color wheel unchanged 06:10:12 Received message from Master: op=Shutter serial=78500 06:10:12 Shutter LASER close 06:10:12 Received message from Camera: op=State serial=78502 06:10:12 GetSingleValue result=40 Value=cccccccc 06:10:12 SkyScan query 06:10:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:10:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:12 Parameters OK 06:10:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:12 Set A/D data flow result=40 06:10:12 Set A/D channel type result=40 06:10:12 Set A/D encoding result=40 06:10:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:12 Set channel filter=0.000000e+000 result=40 06:10:12 Config A/D Result=40 06:10:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:12 Get A/D filter: -9.255963e+061 result=40 06:10:12 Get A/D value=-858993460 result=40 06:10:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:12 Parameters OK 06:10:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:12 Set A/D data flow result=40 06:10:12 Set A/D channel type result=40 06:10:12 Set A/D encoding result=40 06:10:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:12 Set channel filter=0.000000e+000 result=40 06:10:12 Config A/D Result=40 06:10:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:12 Get A/D filter: -9.255963e+061 result=40 06:10:12 Get A/D value=-858993460 result=40 06:10:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:12 Aux= 06:10:12 Message to Camera, serial 78502 queued 06:10:48 Received message from Master: op=PointingHead serial=78514 06:10:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:10:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:10:49 Point started: ret=0 06:10:49 point_skyscan result=0 06:10:49 Check angles 06:10:49 SkyScan query 06:10:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:10:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:10:50 Message to Master queued w/err=0: serial=78514 error=0 06:10:55 Received message from Master: op=Filter serial=78515 06:10:55 Color wheel filter change from 0 to 0 06:10:55 FLIGetFilterPos err=0 currentPosition=0 06:10:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:55 Filter is already there-color wheel unchanged 06:10:55 Received message from Master: op=Shutter serial=78516 06:10:55 Shutter LASER close 06:10:55 Received message from Camera: op=State serial=78518 06:10:55 GetSingleValue result=40 Value=cccccccc 06:10:55 SkyScan query 06:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:10:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:56 Parameters OK 06:10:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:56 Set A/D data flow result=40 06:10:56 Set A/D channel type result=40 06:10:56 Set A/D encoding result=40 06:10:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:56 Set channel filter=0.000000e+000 result=40 06:10:56 Config A/D Result=40 06:10:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:56 Get A/D filter: -9.255963e+061 result=40 06:10:56 Get A/D value=-858993460 result=40 06:10:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:56 Parameters OK 06:10:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:56 Set A/D data flow result=40 06:10:56 Set A/D channel type result=40 06:10:56 Set A/D encoding result=40 06:10:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:56 Set channel filter=0.000000e+000 result=40 06:10:56 Config A/D Result=40 06:10:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:56 Get A/D filter: -9.255963e+061 result=40 06:10:56 Get A/D value=-858993460 result=40 06:10:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:56 Aux= 06:10:56 Message to Camera, serial 78518 queued 06:11:33 Received message from Master: op=PointingHead serial=78531 06:11:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:11:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:11:33 Point started: ret=0 06:11:33 point_skyscan result=0 06:11:34 Check angles 06:11:34 SkyScan query 06:11:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:11:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:11:34 Message to Master queued w/err=0: serial=78531 error=0 06:11:39 Received message from Master: op=Filter serial=78532 06:11:39 Color wheel filter change from 0 to 0 06:11:39 FLIGetFilterPos err=0 currentPosition=0 06:11:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:11:39 Filter is already there-color wheel unchanged 06:11:39 Received message from Master: op=Shutter serial=78533 06:11:39 Shutter LASER close 06:11:39 Received message from Camera: op=State serial=78535 06:11:39 GetSingleValue result=40 Value=cccccccc 06:11:39 SkyScan query 06:11:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:11:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:40 Parameters OK 06:11:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:40 Set A/D data flow result=40 06:11:40 Set A/D channel type result=40 06:11:40 Set A/D encoding result=40 06:11:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:40 Set channel filter=0.000000e+000 result=40 06:11:40 Config A/D Result=40 06:11:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:40 Get A/D filter: -9.255963e+061 result=40 06:11:40 Get A/D value=-858993460 result=40 06:11:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:40 Parameters OK 06:11:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:40 Set A/D data flow result=40 06:11:40 Set A/D channel type result=40 06:11:40 Set A/D encoding result=40 06:11:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:40 Set channel filter=0.000000e+000 result=40 06:11:40 Config A/D Result=40 06:11:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:40 Get A/D filter: -9.255963e+061 result=40 06:11:40 Get A/D value=-858993460 result=40 06:11:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:11:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:11:40 Aux= 06:11:40 Message to Camera, serial 78535 queued 06:12:16 Received message from Master: op=PointingHead serial=78547 06:12:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:12:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:12:16 Point started: ret=0 06:12:16 point_skyscan result=0 06:12:17 Check angles 06:12:17 SkyScan query 06:12:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:12:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:12:18 Message to Master queued w/err=0: serial=78547 error=0 06:12:23 Received message from Master: op=Filter serial=78548 06:12:23 Color wheel filter change from 0 to 0 06:12:23 FLIGetFilterPos err=0 currentPosition=0 06:12:23 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:23 Filter is already there-color wheel unchanged 06:12:23 Received message from Master: op=Shutter serial=78549 06:12:23 Shutter LASER close 06:12:23 Received message from Camera: op=State serial=78551 06:12:23 GetSingleValue result=40 Value=cccccccc 06:12:23 SkyScan query 06:12:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:12:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:23 Parameters OK 06:12:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:23 Set A/D data flow result=40 06:12:23 Set A/D channel type result=40 06:12:23 Set A/D encoding result=40 06:12:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:23 Set channel filter=0.000000e+000 result=40 06:12:23 Config A/D Result=40 06:12:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:23 Get A/D filter: -9.255963e+061 result=40 06:12:23 Get A/D value=-858993460 result=40 06:12:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:23 Parameters OK 06:12:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:23 Set A/D data flow result=40 06:12:23 Set A/D channel type result=40 06:12:23 Set A/D encoding result=40 06:12:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:23 Set channel filter=0.000000e+000 result=40 06:12:23 Config A/D Result=40 06:12:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:23 Get A/D filter: -9.255963e+061 result=40 06:12:23 Get A/D value=-858993460 result=40 06:12:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:23 Aux= 06:12:23 Message to Camera, serial 78551 queued 06:13:00 Received message from Master: op=PointingHead serial=78564 06:13:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:13:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:13:01 Point started: ret=0 06:13:01 point_skyscan result=0 06:13:01 Check angles 06:13:01 SkyScan query 06:13:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 06:13:02 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 06:13:02 Check angles 06:13:02 SkyScan query 06:13:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 06:13:03 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 06:13:03 Check angles 06:13:03 SkyScan query 06:13:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.985<-16399 Statuses=0008 0009 06:13:03 Msec=1500 True Az=112.995 Ze=-65.985 Az status=0008 Ze status=0009 06:13:04 Check angles 06:13:04 SkyScan query 06:13:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.925<-17795 Statuses=0008 0009 06:13:04 Msec=2250 True Az=112.995 Ze=-86.925 Az status=0008 Ze status=0009 06:13:04 Check angles 06:13:04 SkyScan query 06:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 06:13:05 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 06:13:05 Check angles 06:13:05 SkyScan query 06:13:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 06:13:06 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 06:13:06 Check angles 06:13:06 SkyScan query 06:13:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.79<-21986 Statuses=0008 0009 06:13:06 Msec=4500 True Az=112.995 Ze=-149.79 Az status=0008 Ze status=0009 06:13:07 Check angles 06:13:07 SkyScan query 06:13:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.7<-23380 Statuses=0008 0009 06:13:07 Msec=5250 True Az=112.995 Ze=-170.7 Az status=0008 Ze status=0009 06:13:07 Check angles 06:13:07 SkyScan query 06:13:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:13:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:13:08 Message to Master queued w/err=0: serial=78564 error=0 06:13:13 Received message from Master: op=Filter serial=78565 06:13:13 Color wheel filter change from 0 to 0 06:13:13 FLIGetFilterPos err=0 currentPosition=0 06:13:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:13 Filter is already there-color wheel unchanged 06:13:13 Received message from Master: op=Shutter serial=78566 06:13:13 Shutter LASER open 06:13:13 Received message from Camera: op=State serial=78568 06:13:13 GetSingleValue result=40 Value=cccccccc 06:13:13 SkyScan query 06:13:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:13:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:14 Parameters OK 06:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:14 Set A/D data flow result=40 06:13:14 Set A/D channel type result=40 06:13:14 Set A/D encoding result=40 06:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:14 Set channel filter=0.000000e+000 result=40 06:13:14 Config A/D Result=40 06:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:14 Get A/D filter: -9.255963e+061 result=40 06:13:14 Get A/D value=-858993460 result=40 06:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:14 Parameters OK 06:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:14 Set A/D data flow result=40 06:13:14 Set A/D channel type result=40 06:13:14 Set A/D encoding result=40 06:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:14 Set channel filter=0.000000e+000 result=40 06:13:14 Config A/D Result=40 06:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:14 Get A/D filter: -9.255963e+061 result=40 06:13:14 Get A/D value=-858993460 result=40 06:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:14 Aux= 06:13:14 Message to Camera, serial 78568 queued 06:13:22 Received message from Master: op=Shutter serial=78578 06:13:22 Shutter LASER close 06:13:23 Received message from Master: op=PointingHead serial=78582 06:13:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:13:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:13:23 Point started: ret=0 06:13:23 point_skyscan result=0 06:13:24 Check angles 06:13:24 SkyScan query 06:13:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 06:13:25 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 06:13:25 Check angles 06:13:25 SkyScan query 06:13:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 06:13:25 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 06:13:26 Check angles 06:13:26 SkyScan query 06:13:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.35<-18690 Statuses=0008 0009 06:13:26 Msec=1500 True Az=112.995 Ze=-100.35 Az status=0008 Ze status=0009 06:13:26 Check angles 06:13:26 SkyScan query 06:13:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.35<-17290 Statuses=0008 0009 06:13:27 Msec=2250 True Az=112.995 Ze=-79.35 Az status=0008 Ze status=0009 06:13:27 Check angles 06:13:27 SkyScan query 06:13:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.425<-15895 Statuses=0008 0009 06:13:28 Msec=3000 True Az=112.995 Ze=-58.425 Az status=0008 Ze status=0009 06:13:28 Check angles 06:13:28 SkyScan query 06:13:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.47<-14498 Statuses=0008 0009 06:13:28 Msec=3750 True Az=112.995 Ze=-37.47 Az status=0008 Ze status=0009 06:13:29 Check angles 06:13:29 SkyScan query 06:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.5<-13100 Statuses=0008 0009 06:13:29 Msec=4500 True Az=112.995 Ze=-16.5 Az status=0008 Ze status=0009 06:13:29 Check angles 06:13:29 SkyScan query 06:13:30 SkyScan query done: ret=0 az=112.995<-7533 ze=4.38<-11708 Statuses=0008 0009 06:13:30 Msec=5250 True Az=112.995 Ze=4.38 Az status=0008 Ze status=0009 06:13:30 Check angles 06:13:30 SkyScan query 06:13:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:13:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:13:31 Message to Master queued w/err=0: serial=78582 error=0 06:13:36 Received message from Master: op=Filter serial=78583 06:13:36 Color wheel filter change from 0 to 0 06:13:36 FLIGetFilterPos err=0 currentPosition=0 06:13:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:36 Filter is already there-color wheel unchanged 06:13:36 Received message from Master: op=Shutter serial=78584 06:13:36 Shutter LASER close 06:13:36 Received message from Camera: op=State serial=78586 06:13:36 GetSingleValue result=40 Value=cccccccc 06:13:36 SkyScan query 06:13:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:13:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:37 Parameters OK 06:13:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:37 Set A/D data flow result=40 06:13:37 Set A/D channel type result=40 06:13:37 Set A/D encoding result=40 06:13:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:37 Set channel filter=0.000000e+000 result=40 06:13:37 Config A/D Result=40 06:13:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:37 Get A/D filter: -9.255963e+061 result=40 06:13:37 Get A/D value=-858993460 result=40 06:13:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:37 Parameters OK 06:13:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:37 Set A/D data flow result=40 06:13:37 Set A/D channel type result=40 06:13:37 Set A/D encoding result=40 06:13:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:37 Set channel filter=0.000000e+000 result=40 06:13:37 Config A/D Result=40 06:13:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:37 Get A/D filter: -9.255963e+061 result=40 06:13:37 Get A/D value=-858993460 result=40 06:13:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:37 Aux= 06:13:37 Message to Camera, serial 78586 queued 06:14:13 Received message from Master: op=PointingHead serial=78599 06:14:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:14:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:14:14 Point started: ret=0 06:14:14 point_skyscan result=0 06:14:14 Check angles 06:14:14 SkyScan query 06:14:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:14:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:14:15 Message to Master queued w/err=0: serial=78599 error=0 06:14:20 Received message from Master: op=Filter serial=78600 06:14:20 Color wheel filter change from 0 to 0 [UTC 2019-3-3 06:14:20] 06:14:20 FLIGetFilterPos err=0 currentPosition=0 06:14:20 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:20 Filter is already there-color wheel unchanged 06:14:20 Received message from Master: op=Shutter serial=78601 06:14:20 Shutter LASER close 06:14:20 Received message from Camera: op=State serial=78603 06:14:20 GetSingleValue result=40 Value=cccccccc 06:14:20 SkyScan query 06:14:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:14:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:21 Parameters OK 06:14:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:21 Set A/D data flow result=40 06:14:21 Set A/D channel type result=40 06:14:21 Set A/D encoding result=40 06:14:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:21 Set channel filter=0.000000e+000 result=40 06:14:21 Config A/D Result=40 06:14:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:21 Get A/D filter: -9.255963e+061 result=40 06:14:21 Get A/D value=-858993460 result=40 06:14:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:21 Parameters OK 06:14:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:21 Set A/D data flow result=40 06:14:21 Set A/D channel type result=40 06:14:21 Set A/D encoding result=40 06:14:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:21 Set channel filter=0.000000e+000 result=40 06:14:21 Config A/D Result=40 06:14:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:21 Get A/D filter: -9.255963e+061 result=40 06:14:21 Get A/D value=-858993460 result=40 06:14:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:21 Aux= 06:14:21 Message to Camera, serial 78603 queued 06:14:58 Received message from Master: op=PointingHead serial=78616 06:14:58 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:14:58 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:14:58 Point started: ret=0 06:14:58 point_skyscan result=0 06:14:59 Check angles 06:14:59 SkyScan query 06:14:59 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 06:14:59 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 06:15:00 Check angles 06:15:00 SkyScan query 06:15:00 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.495<-12433 Statuses=0009 0008 06:15:00 Msec=750 True Az=153.795 Ze=-6.495 Az status=0009 Ze status=0008 06:15:00 Check angles 06:15:00 SkyScan query 06:15:01 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 06:15:01 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 06:15:01 Check angles 06:15:01 SkyScan query 06:15:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:15:02 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:15:02 Message to Master queued w/err=0: serial=78616 error=0 06:15:07 Received message from Master: op=Filter serial=78617 06:15:07 Color wheel filter change from 0 to 0 06:15:07 FLIGetFilterPos err=0 currentPosition=0 06:15:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:07 Filter is already there-color wheel unchanged 06:15:07 Received message from Master: op=Shutter serial=78618 06:15:07 Shutter LASER close 06:15:07 Received message from Camera: op=State serial=78620 06:15:07 GetSingleValue result=40 Value=cccccccc 06:15:07 SkyScan query 06:15:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:15:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:07 Parameters OK 06:15:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:07 Set A/D data flow result=40 06:15:07 Set A/D channel type result=40 06:15:07 Set A/D encoding result=40 06:15:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:07 Set channel filter=0.000000e+000 result=40 06:15:07 Config A/D Result=40 06:15:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:07 Get A/D filter: -9.255963e+061 result=40 06:15:07 Get A/D value=-858993460 result=40 06:15:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:07 Parameters OK 06:15:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:07 Set A/D data flow result=40 06:15:07 Set A/D channel type result=40 06:15:07 Set A/D encoding result=40 06:15:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:07 Set channel filter=0.000000e+000 result=40 06:15:07 Config A/D Result=40 06:15:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:07 Get A/D filter: -9.255963e+061 result=40 06:15:07 Get A/D value=-858993460 result=40 06:15:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:07 Aux= 06:15:07 Message to Camera, serial 78620 queued 06:15:44 Received message from Master: op=PointingHead serial=78633 06:15:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:15:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:15:45 Point started: ret=0 06:15:45 point_skyscan result=0 06:15:45 Check angles 06:15:45 SkyScan query 06:15:46 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 06:15:46 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 06:15:46 Check angles 06:15:46 SkyScan query 06:15:47 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 06:15:47 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 06:15:47 Check angles 06:15:47 SkyScan query 06:15:47 SkyScan query done: ret=0 az=118.02<-7868 ze=6.495<-11567 Statuses=0009 0008 06:15:47 Msec=1500 True Az=118.02 Ze=6.495 Az status=0009 Ze status=0008 06:15:48 Check angles 06:15:48 SkyScan query 06:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:15:48 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:15:48 Message to Master queued w/err=0: serial=78633 error=0 06:15:53 Received message from Master: op=Filter serial=78634 06:15:53 Color wheel filter change from 0 to 0 06:15:53 FLIGetFilterPos err=0 currentPosition=0 06:15:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:53 Filter is already there-color wheel unchanged 06:15:53 Received message from Master: op=Shutter serial=78635 06:15:53 Shutter LASER close 06:15:53 Received message from Camera: op=State serial=78637 06:15:53 GetSingleValue result=40 Value=cccccccc 06:15:53 SkyScan query 06:15:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:15:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:54 Parameters OK 06:15:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:54 Set A/D data flow result=40 06:15:54 Set A/D channel type result=40 06:15:54 Set A/D encoding result=40 06:15:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:54 Set channel filter=0.000000e+000 result=40 06:15:54 Config A/D Result=40 06:15:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:54 Get A/D filter: -9.255963e+061 result=40 06:15:54 Get A/D value=-858993460 result=40 06:15:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:54 Parameters OK 06:15:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:54 Set A/D data flow result=40 06:15:54 Set A/D channel type result=40 06:15:54 Set A/D encoding result=40 06:15:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:54 Set channel filter=0.000000e+000 result=40 06:15:54 Config A/D Result=40 06:15:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:54 Get A/D filter: -9.255963e+061 result=40 06:15:54 Get A/D value=-858993460 result=40 06:15:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:54 Aux= 06:15:54 Message to Camera, serial 78637 queued 06:16:31 Received message from Master: op=PointingHead serial=78650 06:16:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:16:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:16:31 Point started: ret=0 06:16:31 point_skyscan result=0 06:16:32 Check angles 06:16:32 SkyScan query 06:16:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 06:16:33 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 06:16:33 Check angles 06:16:33 SkyScan query 06:16:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.19<-14946 Statuses=0008 0009 06:16:33 Msec=750 True Az=112.995 Ze=-44.19 Az status=0008 Ze status=0009 06:16:33 Check angles 06:16:33 SkyScan query 06:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.115<-16341 Statuses=0008 0009 06:16:34 Msec=1500 True Az=112.995 Ze=-65.115 Az status=0008 Ze status=0009 06:16:34 Check angles 06:16:34 SkyScan query 06:16:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.085<-17739 Statuses=0008 0009 06:16:35 Msec=2250 True Az=112.995 Ze=-86.085 Az status=0008 Ze status=0009 06:16:35 Check angles 06:16:35 SkyScan query 06:16:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.025<-19135 Statuses=0008 0009 06:16:36 Msec=3000 True Az=112.995 Ze=-107.025 Az status=0008 Ze status=0009 06:16:36 Check angles 06:16:36 SkyScan query 06:16:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.995<-20533 Statuses=0008 0009 06:16:36 Msec=3750 True Az=112.995 Ze=-127.995 Az status=0008 Ze status=0009 06:16:36 Check angles 06:16:36 SkyScan query 06:16:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.935<-21929 Statuses=0008 0009 06:16:37 Msec=4500 True Az=112.995 Ze=-148.935 Az status=0008 Ze status=0009 06:16:37 Check angles 06:16:37 SkyScan query 06:16:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.89<-23326 Statuses=0008 0009 06:16:38 Msec=5250 True Az=112.995 Ze=-169.89 Az status=0008 Ze status=0009 06:16:38 Check angles 06:16:38 SkyScan query 06:16:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:16:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:16:39 Message to Master queued w/err=0: serial=78650 error=0 06:16:44 Received message from Master: op=Filter serial=78651 06:16:44 Color wheel filter change from 0 to 0 06:16:44 FLIGetFilterPos err=0 currentPosition=0 06:16:44 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:44 Filter is already there-color wheel unchanged 06:16:44 Received message from Master: op=Shutter serial=78652 06:16:44 Shutter LASER open 06:16:44 Received message from Camera: op=State serial=78654 06:16:44 GetSingleValue result=40 Value=cccccccc 06:16:44 SkyScan query 06:16:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:16:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:44 Parameters OK 06:16:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:44 Set A/D data flow result=40 06:16:44 Set A/D channel type result=40 06:16:44 Set A/D encoding result=40 06:16:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:44 Set channel filter=0.000000e+000 result=40 06:16:44 Config A/D Result=40 06:16:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:44 Get A/D filter: -9.255963e+061 result=40 06:16:44 Get A/D value=-858993460 result=40 06:16:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:44 Parameters OK 06:16:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:44 Set A/D data flow result=40 06:16:44 Set A/D channel type result=40 06:16:44 Set A/D encoding result=40 06:16:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:44 Set channel filter=0.000000e+000 result=40 06:16:44 Config A/D Result=40 06:16:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:44 Get A/D filter: -9.255963e+061 result=40 06:16:44 Get A/D value=-858993460 result=40 06:16:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:44 Aux= 06:16:44 Message to Camera, serial 78654 queued 06:16:53 Received message from Master: op=Shutter serial=78664 06:16:53 Shutter LASER close 06:16:53 Received message from Master: op=PointingHead serial=78668 06:16:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:16:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:16:54 Point started: ret=0 06:16:54 point_skyscan result=0 06:16:54 Check angles 06:16:54 SkyScan query 06:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 06:16:55 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 06:16:55 Check angles 06:16:55 SkyScan query 06:16:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 06:16:56 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 06:16:56 Check angles 06:16:56 SkyScan query 06:16:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 06:16:57 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 06:16:57 Check angles 06:16:57 SkyScan query 06:16:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.71<-17314 Statuses=0008 0009 06:16:57 Msec=2250 True Az=112.995 Ze=-79.71 Az status=0008 Ze status=0009 06:16:57 Check angles 06:16:57 SkyScan query 06:16:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.755<-15917 Statuses=0008 0009 06:16:58 Msec=3000 True Az=112.995 Ze=-58.755 Az status=0008 Ze status=0009 06:16:58 Check angles 06:16:58 SkyScan query 06:16:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.785<-14519 Statuses=0008 0009 06:16:59 Msec=3750 True Az=112.995 Ze=-37.785 Az status=0008 Ze status=0009 06:16:59 Check angles 06:16:59 SkyScan query 06:17:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 06:17:00 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 06:17:00 Check angles 06:17:00 SkyScan query 06:17:00 SkyScan query done: ret=0 az=112.995<-7533 ze=4.11<-11726 Statuses=0008 0009 06:17:00 Msec=5250 True Az=112.995 Ze=4.11 Az status=0008 Ze status=0009 06:17:00 Check angles 06:17:00 SkyScan query 06:17:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:17:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:17:01 Message to Master queued w/err=0: serial=78668 error=0 06:17:06 Received message from Master: op=Filter serial=78669 06:17:06 Color wheel filter change from 0 to 0 06:17:06 FLIGetFilterPos err=0 currentPosition=0 06:17:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:06 Filter is already there-color wheel unchanged 06:17:06 Received message from Master: op=Shutter serial=78670 06:17:06 Shutter LASER close 06:17:06 Received message from Camera: op=State serial=78672 06:17:06 GetSingleValue result=40 Value=cccccccc 06:17:06 SkyScan query 06:17:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:17:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:07 Parameters OK 06:17:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:07 Set A/D data flow result=40 06:17:07 Set A/D channel type result=40 06:17:07 Set A/D encoding result=40 06:17:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:07 Set channel filter=0.000000e+000 result=40 06:17:07 Config A/D Result=40 06:17:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:07 Get A/D filter: -9.255963e+061 result=40 06:17:07 Get A/D value=-858993460 result=40 06:17:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:07 Parameters OK 06:17:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:07 Set A/D data flow result=40 06:17:07 Set A/D channel type result=40 06:17:07 Set A/D encoding result=40 06:17:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:07 Set channel filter=0.000000e+000 result=40 06:17:07 Config A/D Result=40 06:17:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:07 Get A/D filter: -9.255963e+061 result=40 06:17:07 Get A/D value=-858993460 result=40 06:17:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:07 Aux= 06:17:07 Message to Camera, serial 78672 queued 06:17:44 Received message from Master: op=PointingHead serial=78685 06:17:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:17:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:17:44 Point started: ret=0 06:17:44 point_skyscan result=0 06:17:45 Check angles 06:17:45 SkyScan query 06:17:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:17:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:17:46 Message to Master queued w/err=0: serial=78685 error=0 06:17:51 Received message from Master: op=Filter serial=78686 06:17:51 Color wheel filter change from 0 to 0 06:17:51 FLIGetFilterPos err=0 currentPosition=0 06:17:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:51 Filter is already there-color wheel unchanged 06:17:51 Received message from Master: op=Shutter serial=78687 06:17:51 Shutter LASER close 06:17:51 Received message from Camera: op=State serial=78689 06:17:51 GetSingleValue result=40 Value=cccccccc 06:17:51 SkyScan query 06:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:17:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:51 Parameters OK 06:17:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:51 Set A/D data flow result=40 06:17:51 Set A/D channel type result=40 06:17:51 Set A/D encoding result=40 06:17:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:51 Set channel filter=0.000000e+000 result=40 06:17:51 Config A/D Result=40 06:17:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:51 Get A/D filter: -9.255963e+061 result=40 06:17:51 Get A/D value=-858993460 result=40 06:17:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:51 Parameters OK 06:17:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:51 Set A/D data flow result=40 06:17:51 Set A/D channel type result=40 06:17:51 Set A/D encoding result=40 06:17:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:51 Set channel filter=0.000000e+000 result=40 06:17:51 Config A/D Result=40 06:17:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:51 Get A/D filter: -9.255963e+061 result=40 06:17:51 Get A/D value=-858993460 result=40 06:17:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:51 Aux= 06:17:51 Message to Camera, serial 78689 queued 06:18:28 Received message from Master: op=PointingHead serial=78702 06:18:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:18:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:18:28 Point started: ret=0 06:18:28 point_skyscan result=0 06:18:29 Check angles 06:18:29 SkyScan query 06:18:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:18:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:18:30 Message to Master queued w/err=0: serial=78702 error=0 06:18:35 Received message from Master: op=Filter serial=78703 06:18:35 Color wheel filter change from 0 to 0 06:18:35 FLIGetFilterPos err=0 currentPosition=0 06:18:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:35 Filter is already there-color wheel unchanged 06:18:35 Received message from Master: op=Shutter serial=78704 06:18:35 Shutter LASER close 06:18:35 Received message from Camera: op=State serial=78706 06:18:35 GetSingleValue result=40 Value=cccccccc 06:18:35 SkyScan query 06:18:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:18:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:36 Parameters OK 06:18:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:36 Set A/D data flow result=40 06:18:36 Set A/D channel type result=40 06:18:36 Set A/D encoding result=40 06:18:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:36 Set channel filter=0.000000e+000 result=40 06:18:36 Config A/D Result=40 06:18:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:36 Get A/D filter: -9.255963e+061 result=40 06:18:36 Get A/D value=-858993460 result=40 06:18:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:36 Parameters OK 06:18:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:36 Set A/D data flow result=40 06:18:36 Set A/D channel type result=40 06:18:36 Set A/D encoding result=40 06:18:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:36 Set channel filter=0.000000e+000 result=40 06:18:36 Config A/D Result=40 06:18:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:36 Get A/D filter: -9.255963e+061 result=40 06:18:36 Get A/D value=-858993460 result=40 06:18:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:36 Aux= 06:18:36 Message to Camera, serial 78706 queued 06:19:12 Received message from Master: op=PointingHead serial=78719 06:19:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:19:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:19:13 Point started: ret=0 06:19:13 point_skyscan result=0 06:19:14 Check angles 06:19:14 SkyScan query 06:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:19:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:19:14 Message to Master queued w/err=0: serial=78719 error=0 06:19:19 Received message from Master: op=Filter serial=78720 06:19:19 Color wheel filter change from 0 to 0 06:19:19 FLIGetFilterPos err=0 currentPosition=0 06:19:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:19 Filter is already there-color wheel unchanged 06:19:19 Received message from Master: op=Shutter serial=78721 06:19:19 Shutter LASER close 06:19:19 Received message from Camera: op=State serial=78723 06:19:19 GetSingleValue result=40 Value=cccccccc 06:19:19 SkyScan query 06:19:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:19:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:20 Parameters OK 06:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:20 Set A/D data flow result=40 06:19:20 Set A/D channel type result=40 06:19:20 Set A/D encoding result=40 06:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:20 Set channel filter=0.000000e+000 result=40 06:19:20 Config A/D Result=40 06:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:20 Get A/D filter: -9.255963e+061 result=40 06:19:20 Get A/D value=-858993460 result=40 06:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:20 Parameters OK 06:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:20 Set A/D data flow result=40 06:19:20 Set A/D channel type result=40 06:19:20 Set A/D encoding result=40 06:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:20 Set channel filter=0.000000e+000 result=40 06:19:20 Config A/D Result=40 06:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:20 Get A/D filter: -9.255963e+061 result=40 06:19:20 Get A/D value=-858993460 result=40 06:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:20 Aux= 06:19:20 Message to Camera, serial 78723 queued 06:19:57 Received message from Master: op=PointingHead serial=78736 06:19:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:19:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:19:57 Point started: ret=0 06:19:57 point_skyscan result=0 06:19:58 Check angles 06:19:58 SkyScan query 06:19:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 06:19:58 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 06:19:59 Check angles 06:19:59 SkyScan query 06:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.16<-14944 Statuses=0008 0009 06:19:59 Msec=750 True Az=112.995 Ze=-44.16 Az status=0008 Ze status=0009 06:19:59 Check angles 06:19:59 SkyScan query 06:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 06:20:00 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 06:20:00 Check angles 06:20:00 SkyScan query 06:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.49<-17766 Statuses=0008 0009 06:20:01 Msec=2250 True Az=112.995 Ze=-86.49 Az status=0008 Ze status=0009 06:20:01 Check angles 06:20:01 SkyScan query 06:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.445<-19163 Statuses=0008 0009 06:20:01 Msec=3000 True Az=112.995 Ze=-107.445 Az status=0008 Ze status=0009 06:20:02 Check angles 06:20:02 SkyScan query 06:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.385<-20559 Statuses=0008 0009 06:20:02 Msec=3750 True Az=112.995 Ze=-128.385 Az status=0008 Ze status=0009 06:20:02 Check angles 06:20:02 SkyScan query 06:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.355<-21957 Statuses=0008 0009 06:20:03 Msec=4500 True Az=112.995 Ze=-149.355 Az status=0008 Ze status=0009 06:20:03 Check angles 06:20:03 SkyScan query 06:20:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.295<-23353 Statuses=0008 0009 06:20:04 Msec=5250 True Az=112.995 Ze=-170.295 Az status=0008 Ze status=0009 06:20:04 Check angles 06:20:04 SkyScan query 06:20:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:20:04 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:20:04 Message to Master queued w/err=0: serial=78736 error=0 06:20:09 Received message from Master: op=Filter serial=78737 06:20:09 Color wheel filter change from 0 to 0 06:20:09 FLIGetFilterPos err=0 currentPosition=0 06:20:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:09 Filter is already there-color wheel unchanged 06:20:10 Received message from Master: op=Shutter serial=78738 06:20:10 Shutter LASER open 06:20:10 Received message from Camera: op=State serial=78740 06:20:10 GetSingleValue result=40 Value=cccccccc 06:20:10 SkyScan query 06:20:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:20:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:10 Parameters OK 06:20:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:10 Set A/D data flow result=40 06:20:10 Set A/D channel type result=40 06:20:10 Set A/D encoding result=40 06:20:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:10 Set channel filter=0.000000e+000 result=40 06:20:10 Config A/D Result=40 06:20:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:10 Get A/D filter: -9.255963e+061 result=40 06:20:10 Get A/D value=-858993460 result=40 06:20:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:10 Parameters OK 06:20:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:10 Set A/D data flow result=40 06:20:10 Set A/D channel type result=40 06:20:10 Set A/D encoding result=40 06:20:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:10 Set channel filter=0.000000e+000 result=40 06:20:10 Config A/D Result=40 06:20:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:10 Get A/D filter: -9.255963e+061 result=40 06:20:10 Get A/D value=-858993460 result=40 06:20:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:10 Aux= 06:20:10 Message to Camera, serial 78740 queued 06:20:19 Received message from Master: op=Shutter serial=78750 06:20:19 Shutter LASER close 06:20:19 Received message from Master: op=PointingHead serial=78754 06:20:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:20:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:20:20 Point started: ret=0 06:20:20 point_skyscan result=0 06:20:20 Check angles 06:20:20 SkyScan query 06:20:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 06:20:21 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 06:20:21 Check angles 06:20:21 SkyScan query 06:20:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 06:20:22 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 06:20:22 Check angles 06:20:22 SkyScan query 06:20:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 06:20:23 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 06:20:23 Check angles 06:20:23 SkyScan query 06:20:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.025<-17335 Statuses=0008 0009 06:20:23 Msec=2250 True Az=112.995 Ze=-80.025 Az status=0008 Ze status=0009 06:20:23 Check angles 06:20:23 SkyScan query 06:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.07<-15938 Statuses=0008 0009 06:20:24 Msec=3000 True Az=112.995 Ze=-59.07 Az status=0008 Ze status=0009 06:20:24 Check angles 06:20:24 SkyScan query 06:20:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.085<-14539 Statuses=0008 0009 06:20:25 Msec=3750 True Az=112.995 Ze=-38.085 Az status=0008 Ze status=0009 06:20:25 Check angles 06:20:25 SkyScan query 06:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.145<-13143 Statuses=0008 0009 06:20:26 Msec=4500 True Az=112.995 Ze=-17.145 Az status=0008 Ze status=0009 06:20:26 Check angles 06:20:26 SkyScan query 06:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=3.81<-11746 Statuses=0008 0009 06:20:26 Msec=5250 True Az=112.995 Ze=3.81 Az status=0008 Ze status=0009 06:20:26 Check angles 06:20:26 SkyScan query 06:20:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:20:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:20:27 Message to Master queued w/err=0: serial=78754 error=0 06:20:32 Received message from Master: op=Filter serial=78755 06:20:32 Color wheel filter change from 0 to 0 06:20:32 FLIGetFilterPos err=0 currentPosition=0 06:20:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:32 Filter is already there-color wheel unchanged 06:20:32 Received message from Master: op=Shutter serial=78756 06:20:32 Shutter LASER close 06:20:32 Received message from Camera: op=State serial=78758 06:20:32 GetSingleValue result=40 Value=cccccccc 06:20:32 SkyScan query 06:20:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:20:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:33 Parameters OK 06:20:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:33 Set A/D data flow result=40 06:20:33 Set A/D channel type result=40 06:20:33 Set A/D encoding result=40 06:20:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:33 Set channel filter=0.000000e+000 result=40 06:20:33 Config A/D Result=40 06:20:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:33 Get A/D filter: -9.255963e+061 result=40 06:20:33 Get A/D value=-858993460 result=40 06:20:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:33 Parameters OK 06:20:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:33 Set A/D data flow result=40 06:20:33 Set A/D channel type result=40 06:20:33 Set A/D encoding result=40 06:20:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:33 Set channel filter=0.000000e+000 result=40 06:20:33 Config A/D Result=40 06:20:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:33 Get A/D filter: -9.255963e+061 result=40 06:20:33 Get A/D value=-858993460 result=40 06:20:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:33 Aux= 06:20:33 Message to Camera, serial 78758 queued 06:21:09 Received message from Master: op=PointingHead serial=78770 06:21:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:21:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:21:09 Point started: ret=0 06:21:09 point_skyscan result=0 06:21:10 Check angles 06:21:10 SkyScan query 06:21:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:21:11 Message to Master queued w/err=0: serial=78770 error=0 06:21:16 Received message from Master: op=Filter serial=78771 06:21:16 Color wheel filter change from 0 to 0 06:21:16 FLIGetFilterPos err=0 currentPosition=0 06:21:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:16 Filter is already there-color wheel unchanged 06:21:16 Received message from Master: op=Shutter serial=78772 06:21:16 Shutter LASER close 06:21:16 Received message from Camera: op=State serial=78774 06:21:16 GetSingleValue result=40 Value=cccccccc 06:21:16 SkyScan query 06:21:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:16 Parameters OK 06:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:16 Set A/D data flow result=40 06:21:16 Set A/D channel type result=40 06:21:16 Set A/D encoding result=40 06:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:16 Set channel filter=0.000000e+000 result=40 06:21:16 Config A/D Result=40 06:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:16 Get A/D filter: -9.255963e+061 result=40 06:21:16 Get A/D value=-858993460 result=40 06:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:16 Parameters OK 06:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:16 Set A/D data flow result=40 06:21:16 Set A/D channel type result=40 06:21:16 Set A/D encoding result=40 06:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:16 Set channel filter=0.000000e+000 result=40 06:21:16 Config A/D Result=40 06:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:16 Get A/D filter: -9.255963e+061 result=40 06:21:16 Get A/D value=-858993460 result=40 06:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:16 Aux= 06:21:16 Message to Camera, serial 78774 queued 06:21:53 Received message from Master: op=PointingHead serial=78787 06:21:53 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:21:53 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:21:54 Point started: ret=0 06:21:54 point_skyscan result=0 06:21:54 Check angles 06:21:54 SkyScan query 06:21:55 SkyScan query done: ret=0 az=135.675<-9045 ze=-6.51<-12434 Statuses=0009 0008 06:21:55 Msec=0 True Az=135.675 Ze=-6.51 Az status=0009 Ze status=0008 06:21:55 Check angles 06:21:55 SkyScan query 06:21:56 SkyScan query done: ret=0 az=153.165<-10211 ze=-6.495<-12433 Statuses=0009 0008 06:21:56 Msec=750 True Az=153.165 Ze=-6.495 Az status=0009 Ze status=0008 06:21:56 Check angles 06:21:56 SkyScan query 06:21:56 SkyScan query done: ret=0 az=170.97<-11398 ze=-6.495<-12433 Statuses=0009 0008 06:21:56 Msec=1500 True Az=170.97 Ze=-6.495 Az status=0009 Ze status=0008 06:21:57 Check angles 06:21:57 SkyScan query 06:21:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:21:57 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:21:57 Message to Master queued w/err=0: serial=78787 error=0 06:22:02 Received message from Master: op=Filter serial=78788 06:22:02 Color wheel filter change from 0 to 0 06:22:02 FLIGetFilterPos err=0 currentPosition=0 06:22:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:02 Filter is already there-color wheel unchanged 06:22:02 Received message from Master: op=Shutter serial=78789 06:22:02 Shutter LASER close 06:22:02 Received message from Camera: op=State serial=78791 06:22:02 GetSingleValue result=40 Value=cccccccc 06:22:02 SkyScan query 06:22:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:22:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:03 Parameters OK 06:22:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:03 Set A/D data flow result=40 06:22:03 Set A/D channel type result=40 06:22:03 Set A/D encoding result=40 06:22:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:03 Set channel filter=0.000000e+000 result=40 06:22:03 Config A/D Result=40 06:22:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:03 Get A/D filter: -9.255963e+061 result=40 06:22:03 Get A/D value=-858993460 result=40 06:22:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:03 Parameters OK 06:22:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:03 Set A/D data flow result=40 06:22:03 Set A/D channel type result=40 06:22:03 Set A/D encoding result=40 06:22:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:03 Set channel filter=0.000000e+000 result=40 06:22:03 Config A/D Result=40 06:22:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:03 Get A/D filter: -9.255963e+061 result=40 06:22:03 Get A/D value=-858993460 result=40 06:22:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:03 Aux= 06:22:03 Message to Camera, serial 78791 queued 06:22:40 Received message from Master: op=PointingHead serial=78804 06:22:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:22:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:22:40 Point started: ret=0 06:22:40 point_skyscan result=0 06:22:41 Check angles 06:22:41 SkyScan query 06:22:41 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 06:22:41 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 06:22:42 Check angles 06:22:42 SkyScan query 06:22:42 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 06:22:42 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 06:22:42 Check angles 06:22:42 SkyScan query 06:22:43 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 06:22:43 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 06:22:43 Check angles 06:22:43 SkyScan query 06:22:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:22:44 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:22:44 Message to Master queued w/err=0: serial=78804 error=0 06:22:49 Received message from Master: op=Filter serial=78805 06:22:49 Color wheel filter change from 0 to 0 06:22:49 FLIGetFilterPos err=0 currentPosition=0 06:22:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:49 Filter is already there-color wheel unchanged 06:22:49 Received message from Master: op=Shutter serial=78806 06:22:49 Shutter LASER close 06:22:49 Received message from Camera: op=State serial=78808 06:22:49 GetSingleValue result=40 Value=cccccccc 06:22:49 SkyScan query 06:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:22:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:49 Parameters OK 06:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:49 Set A/D data flow result=40 06:22:49 Set A/D channel type result=40 06:22:49 Set A/D encoding result=40 06:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:49 Set channel filter=0.000000e+000 result=40 06:22:49 Config A/D Result=40 06:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:49 Get A/D filter: -9.255963e+061 result=40 06:22:49 Get A/D value=-858993460 result=40 06:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:49 Parameters OK 06:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:49 Set A/D data flow result=40 06:22:49 Set A/D channel type result=40 06:22:49 Set A/D encoding result=40 06:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:49 Set channel filter=0.000000e+000 result=40 06:22:49 Config A/D Result=40 06:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:49 Get A/D filter: -9.255963e+061 result=40 06:22:49 Get A/D value=-858993460 result=40 06:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:49 Aux= 06:22:49 Message to Camera, serial 78808 queued 06:23:26 Received message from Master: op=PointingHead serial=78821 06:23:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:23:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:23:27 Point started: ret=0 06:23:27 point_skyscan result=0 06:23:27 Check angles 06:23:27 SkyScan query 06:23:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 06:23:28 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 06:23:28 Check angles 06:23:28 SkyScan query 06:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.16<-14944 Statuses=0008 0009 06:23:29 Msec=750 True Az=112.995 Ze=-44.16 Az status=0008 Ze status=0009 06:23:29 Check angles 06:23:29 SkyScan query 06:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 06:23:29 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 06:23:30 Check angles 06:23:30 SkyScan query 06:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.07<-17738 Statuses=0008 0009 06:23:30 Msec=2250 True Az=112.995 Ze=-86.07 Az status=0008 Ze status=0009 06:23:30 Check angles 06:23:30 SkyScan query 06:23:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.995<-19133 Statuses=0008 0009 06:23:31 Msec=3000 True Az=112.995 Ze=-106.995 Az status=0008 Ze status=0009 06:23:31 Check angles 06:23:31 SkyScan query 06:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.965<-20531 Statuses=0008 0009 06:23:32 Msec=3750 True Az=112.995 Ze=-127.965 Az status=0008 Ze status=0009 06:23:32 Check angles 06:23:32 SkyScan query 06:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.905<-21927 Statuses=0008 0009 06:23:32 Msec=4500 True Az=112.995 Ze=-148.905 Az status=0008 Ze status=0009 06:23:33 Check angles 06:23:33 SkyScan query 06:23:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.295<-23353 Statuses=0008 0009 06:23:33 Msec=5250 True Az=112.995 Ze=-170.295 Az status=0008 Ze status=0009 06:23:33 Check angles 06:23:33 SkyScan query 06:23:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:23:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:23:34 Message to Master queued w/err=0: serial=78821 error=0 06:23:39 Received message from Master: op=Filter serial=78822 06:23:39 Color wheel filter change from 0 to 0 06:23:39 FLIGetFilterPos err=0 currentPosition=0 06:23:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:39 Filter is already there-color wheel unchanged 06:23:39 Received message from Master: op=Shutter serial=78823 06:23:39 Shutter LASER open 06:23:39 Received message from Camera: op=State serial=78825 06:23:39 GetSingleValue result=40 Value=cccccccc 06:23:39 SkyScan query 06:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:23:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:40 Parameters OK 06:23:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:40 Set A/D data flow result=40 06:23:40 Set A/D channel type result=40 06:23:40 Set A/D encoding result=40 06:23:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:40 Set channel filter=0.000000e+000 result=40 06:23:40 Config A/D Result=40 06:23:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:40 Get A/D filter: -9.255963e+061 result=40 06:23:40 Get A/D value=-858993460 result=40 06:23:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:40 Parameters OK 06:23:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:40 Set A/D data flow result=40 06:23:40 Set A/D channel type result=40 06:23:40 Set A/D encoding result=40 06:23:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:40 Set channel filter=0.000000e+000 result=40 06:23:40 Config A/D Result=40 06:23:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:40 Get A/D filter: -9.255963e+061 result=40 06:23:40 Get A/D value=-858993460 result=40 06:23:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:40 Aux= 06:23:40 Message to Camera, serial 78825 queued 06:23:48 Received message from Master: op=Shutter serial=78835 06:23:48 Shutter LASER close 06:23:49 Received message from Master: op=PointingHead serial=78839 06:23:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:23:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:23:49 Point started: ret=0 06:23:49 point_skyscan result=0 [UTC 2019-3-3 06:23:50] 06:23:50 Check angles 06:23:50 SkyScan query 06:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.005<-21467 Statuses=0008 0009 06:23:50 Msec=0 True Az=112.995 Ze=-142.005 Az status=0008 Ze status=0009 06:23:51 Check angles 06:23:51 SkyScan query 06:23:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.905<-20127 Statuses=0008 0009 06:23:51 Msec=750 True Az=112.995 Ze=-121.905 Az status=0008 Ze status=0009 06:23:51 Check angles 06:23:51 SkyScan query 06:23:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.53<-18702 Statuses=0008 0009 06:23:52 Msec=1500 True Az=112.995 Ze=-100.53 Az status=0008 Ze status=0009 06:23:52 Check angles 06:23:52 SkyScan query 06:23:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.56<-17304 Statuses=0008 0009 06:23:53 Msec=2250 True Az=112.995 Ze=-79.56 Az status=0008 Ze status=0009 06:23:53 Check angles 06:23:53 SkyScan query 06:23:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.635<-15909 Statuses=0008 0009 06:23:53 Msec=3000 True Az=112.995 Ze=-58.635 Az status=0008 Ze status=0009 06:23:54 Check angles 06:23:54 SkyScan query 06:23:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.68<-14512 Statuses=0008 0009 06:23:54 Msec=3750 True Az=112.995 Ze=-37.68 Az status=0008 Ze status=0009 06:23:54 Check angles 06:23:54 SkyScan query 06:23:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.725<-13115 Statuses=0008 0009 06:23:55 Msec=4500 True Az=112.995 Ze=-16.725 Az status=0008 Ze status=0009 06:23:55 Check angles 06:23:55 SkyScan query 06:23:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 06:23:56 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 06:23:56 Check angles 06:23:56 SkyScan query 06:23:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:23:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:23:56 Message to Master queued w/err=0: serial=78839 error=0 06:24:01 Received message from Master: op=Filter serial=78840 06:24:01 Color wheel filter change from 0 to 0 06:24:01 FLIGetFilterPos err=0 currentPosition=0 06:24:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:01 Filter is already there-color wheel unchanged 06:24:02 Received message from Master: op=Shutter serial=78841 06:24:02 Shutter LASER close 06:24:02 Received message from Camera: op=State serial=78843 06:24:02 GetSingleValue result=40 Value=cccccccc 06:24:02 SkyScan query 06:24:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:24:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:02 Parameters OK 06:24:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:02 Set A/D data flow result=40 06:24:02 Set A/D channel type result=40 06:24:02 Set A/D encoding result=40 06:24:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:02 Set channel filter=0.000000e+000 result=40 06:24:02 Config A/D Result=40 06:24:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:02 Get A/D filter: -9.255963e+061 result=40 06:24:02 Get A/D value=-858993460 result=40 06:24:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:02 Parameters OK 06:24:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:02 Set A/D data flow result=40 06:24:02 Set A/D channel type result=40 06:24:02 Set A/D encoding result=40 06:24:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:02 Set channel filter=0.000000e+000 result=40 06:24:02 Config A/D Result=40 06:24:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:02 Get A/D filter: -9.255963e+061 result=40 06:24:02 Get A/D value=-858993460 result=40 06:24:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:02 Aux= 06:24:02 Message to Camera, serial 78843 queued 06:24:39 Received message from Master: op=PointingHead serial=78856 06:24:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:24:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:24:40 Point started: ret=0 06:24:40 point_skyscan result=0 06:24:40 Check angles 06:24:40 SkyScan query 06:24:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:24:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:24:41 Message to Master queued w/err=0: serial=78856 error=0 06:24:46 Received message from Master: op=Filter serial=78857 06:24:46 Color wheel filter change from 0 to 0 06:24:46 FLIGetFilterPos err=0 currentPosition=0 06:24:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:46 Filter is already there-color wheel unchanged 06:24:46 Received message from Master: op=Shutter serial=78858 06:24:46 Shutter LASER close 06:24:46 Received message from Camera: op=State serial=78860 06:24:46 GetSingleValue result=40 Value=cccccccc 06:24:46 SkyScan query 06:24:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:24:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:47 Parameters OK 06:24:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:47 Set A/D data flow result=40 06:24:47 Set A/D channel type result=40 06:24:47 Set A/D encoding result=40 06:24:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:47 Set channel filter=0.000000e+000 result=40 06:24:47 Config A/D Result=40 06:24:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:47 Get A/D filter: -9.255963e+061 result=40 06:24:47 Get A/D value=-858993460 result=40 06:24:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:47 Parameters OK 06:24:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:47 Set A/D data flow result=40 06:24:47 Set A/D channel type result=40 06:24:47 Set A/D encoding result=40 06:24:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:47 Set channel filter=0.000000e+000 result=40 06:24:47 Config A/D Result=40 06:24:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:47 Get A/D filter: -9.255963e+061 result=40 06:24:47 Get A/D value=-858993460 result=40 06:24:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:47 Aux= 06:24:47 Message to Camera, serial 78860 queued 06:25:24 Received message from Master: op=PointingHead serial=78873 06:25:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:25:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:25:24 Point started: ret=0 06:25:24 point_skyscan result=0 06:25:25 Check angles 06:25:25 SkyScan query 06:25:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:25:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:25:25 Message to Master queued w/err=0: serial=78873 error=0 06:25:30 Received message from Master: op=Filter serial=78874 06:25:30 Color wheel filter change from 0 to 0 06:25:30 FLIGetFilterPos err=0 currentPosition=0 06:25:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:30 Filter is already there-color wheel unchanged 06:25:30 Received message from Master: op=Shutter serial=78875 06:25:30 Shutter LASER close 06:25:30 Received message from Camera: op=State serial=78877 06:25:30 GetSingleValue result=40 Value=cccccccc 06:25:30 SkyScan query 06:25:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:25:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:31 Parameters OK 06:25:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:31 Set A/D data flow result=40 06:25:31 Set A/D channel type result=40 06:25:31 Set A/D encoding result=40 06:25:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:31 Set channel filter=0.000000e+000 result=40 06:25:31 Config A/D Result=40 06:25:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:31 Get A/D filter: -9.255963e+061 result=40 06:25:31 Get A/D value=-858993460 result=40 06:25:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:31 Parameters OK 06:25:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:31 Set A/D data flow result=40 06:25:31 Set A/D channel type result=40 06:25:31 Set A/D encoding result=40 06:25:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:31 Set channel filter=0.000000e+000 result=40 06:25:31 Config A/D Result=40 06:25:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:31 Get A/D filter: -9.255963e+061 result=40 06:25:31 Get A/D value=-858993460 result=40 06:25:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:31 Aux= 06:25:31 Message to Camera, serial 78877 queued 06:26:07 Received message from Master: op=PointingHead serial=78889 06:26:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:26:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:26:07 Point started: ret=0 06:26:07 point_skyscan result=0 06:26:08 Check angles 06:26:08 SkyScan query 06:26:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:26:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:26:09 Message to Master queued w/err=0: serial=78889 error=0 06:26:14 Received message from Master: op=Filter serial=78890 06:26:14 Color wheel filter change from 0 to 0 06:26:14 FLIGetFilterPos err=0 currentPosition=0 06:26:14 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:14 Filter is already there-color wheel unchanged 06:26:14 Received message from Master: op=Shutter serial=78891 06:26:14 Shutter LASER close 06:26:14 Received message from Camera: op=State serial=78893 06:26:14 GetSingleValue result=40 Value=cccccccc 06:26:14 SkyScan query 06:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:26:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:14 Parameters OK 06:26:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:14 Set A/D data flow result=40 06:26:14 Set A/D channel type result=40 06:26:14 Set A/D encoding result=40 06:26:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:14 Set channel filter=0.000000e+000 result=40 06:26:14 Config A/D Result=40 06:26:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:14 Get A/D filter: -9.255963e+061 result=40 06:26:14 Get A/D value=-858993460 result=40 06:26:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:14 Parameters OK 06:26:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:14 Set A/D data flow result=40 06:26:14 Set A/D channel type result=40 06:26:14 Set A/D encoding result=40 06:26:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:14 Set channel filter=0.000000e+000 result=40 06:26:14 Config A/D Result=40 06:26:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:14 Get A/D filter: -9.255963e+061 result=40 06:26:14 Get A/D value=-858993460 result=40 06:26:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:14 Aux= 06:26:14 Message to Camera, serial 78893 queued 06:26:50 Received message from Master: op=PointingHead serial=78905 06:26:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:26:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:26:51 Point started: ret=0 06:26:51 point_skyscan result=0 06:26:51 Check angles 06:26:51 SkyScan query 06:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 06:26:52 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 06:26:52 Check angles 06:26:52 SkyScan query 06:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 06:26:53 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 06:26:53 Check angles 06:26:53 SkyScan query 06:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.97<-16398 Statuses=0008 0009 06:26:53 Msec=1500 True Az=112.995 Ze=-65.97 Az status=0008 Ze status=0009 06:26:54 Check angles 06:26:54 SkyScan query 06:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 06:26:54 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 06:26:54 Check angles 06:26:54 SkyScan query 06:26:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 06:26:55 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 06:26:55 Check angles 06:26:55 SkyScan query 06:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.255<-20617 Statuses=0008 0009 06:26:56 Msec=3750 True Az=112.995 Ze=-129.255 Az status=0008 Ze status=0009 06:26:56 Check angles 06:26:56 SkyScan query 06:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.21<-22014 Statuses=0008 0009 06:26:56 Msec=4500 True Az=112.995 Ze=-150.21 Az status=0008 Ze status=0009 06:26:57 Check angles 06:26:57 SkyScan query 06:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.03<-23402 Statuses=0008 0009 06:26:57 Msec=5250 True Az=112.995 Ze=-171.03 Az status=0008 Ze status=0009 06:26:57 Check angles 06:26:57 SkyScan query 06:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:26:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:26:58 Message to Master queued w/err=0: serial=78905 error=0 06:27:03 Received message from Master: op=Filter serial=78906 06:27:03 Color wheel filter change from 0 to 0 06:27:03 FLIGetFilterPos err=0 currentPosition=0 06:27:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:03 Filter is already there-color wheel unchanged 06:27:03 Received message from Master: op=Shutter serial=78907 06:27:03 Shutter LASER open 06:27:03 Received message from Camera: op=State serial=78909 06:27:03 GetSingleValue result=40 Value=cccccccc 06:27:03 SkyScan query 06:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:27:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:04 Parameters OK 06:27:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:04 Set A/D data flow result=40 06:27:04 Set A/D channel type result=40 06:27:04 Set A/D encoding result=40 06:27:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:04 Set channel filter=0.000000e+000 result=40 06:27:04 Config A/D Result=40 06:27:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:04 Get A/D filter: -9.255963e+061 result=40 06:27:04 Get A/D value=-858993460 result=40 06:27:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:04 Parameters OK 06:27:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:04 Set A/D data flow result=40 06:27:04 Set A/D channel type result=40 06:27:04 Set A/D encoding result=40 06:27:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:04 Set channel filter=0.000000e+000 result=40 06:27:04 Config A/D Result=40 06:27:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:04 Get A/D filter: -9.255963e+061 result=40 06:27:04 Get A/D value=-858993460 result=40 06:27:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:04 Aux= 06:27:04 Message to Camera, serial 78909 queued 06:27:12 Received message from Master: op=Shutter serial=78919 06:27:12 Shutter LASER close 06:27:13 Received message from Master: op=PointingHead serial=78923 06:27:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:27:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:27:13 Point started: ret=0 06:27:13 point_skyscan result=0 06:27:14 Check angles 06:27:14 SkyScan query 06:27:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 06:27:15 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 06:27:15 Check angles 06:27:15 SkyScan query 06:27:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 06:27:15 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 06:27:16 Check angles 06:27:16 SkyScan query 06:27:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 06:27:16 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 06:27:16 Check angles 06:27:16 SkyScan query 06:27:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 06:27:17 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 06:27:17 Check angles 06:27:17 SkyScan query 06:27:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 06:27:18 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 06:27:18 Check angles 06:27:18 SkyScan query 06:27:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.935<-14529 Statuses=0008 0009 06:27:18 Msec=3750 True Az=112.995 Ze=-37.935 Az status=0008 Ze status=0009 06:27:19 Check angles 06:27:19 SkyScan query 06:27:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.995<-13133 Statuses=0008 0009 06:27:19 Msec=4500 True Az=112.995 Ze=-16.995 Az status=0008 Ze status=0009 06:27:19 Check angles 06:27:19 SkyScan query 06:27:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.35<-11710 Statuses=0008 0009 06:27:20 Msec=5250 True Az=112.995 Ze=4.35 Az status=0008 Ze status=0009 06:27:20 Check angles 06:27:20 SkyScan query 06:27:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:27:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:27:21 Message to Master queued w/err=0: serial=78923 error=0 06:27:26 Received message from Master: op=Filter serial=78924 06:27:26 Color wheel filter change from 0 to 0 06:27:26 FLIGetFilterPos err=0 currentPosition=0 06:27:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:26 Filter is already there-color wheel unchanged 06:27:26 Received message from Master: op=Shutter serial=78925 06:27:26 Shutter LASER close 06:27:26 Received message from Camera: op=State serial=78927 06:27:26 GetSingleValue result=40 Value=cccccccc 06:27:26 SkyScan query 06:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:27:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:27 Parameters OK 06:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:27 Set A/D data flow result=40 06:27:27 Set A/D channel type result=40 06:27:27 Set A/D encoding result=40 06:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:27 Set channel filter=0.000000e+000 result=40 06:27:27 Config A/D Result=40 06:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:27 Get A/D filter: -9.255963e+061 result=40 06:27:27 Get A/D value=-858993460 result=40 06:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:27 Parameters OK 06:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:27 Set A/D data flow result=40 06:27:27 Set A/D channel type result=40 06:27:27 Set A/D encoding result=40 06:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:27 Set channel filter=0.000000e+000 result=40 06:27:27 Config A/D Result=40 06:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:27 Get A/D filter: -9.255963e+061 result=40 06:27:27 Get A/D value=-858993460 result=40 06:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:27 Aux= 06:27:27 Message to Camera, serial 78927 queued 06:28:03 Received message from Master: op=PointingHead serial=78940 06:28:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:28:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:28:04 Point started: ret=0 06:28:04 point_skyscan result=0 06:28:05 Check angles 06:28:05 SkyScan query 06:28:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:28:05 Message to Master queued w/err=0: serial=78940 error=0 06:28:10 Received message from Master: op=Filter serial=78941 06:28:10 Color wheel filter change from 0 to 0 06:28:10 FLIGetFilterPos err=0 currentPosition=0 06:28:10 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:10 Filter is already there-color wheel unchanged 06:28:10 Received message from Master: op=Shutter serial=78942 06:28:10 Shutter LASER close 06:28:10 Received message from Camera: op=State serial=78944 06:28:10 GetSingleValue result=40 Value=cccccccc 06:28:10 SkyScan query 06:28:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:11 Parameters OK 06:28:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:11 Set A/D data flow result=40 06:28:11 Set A/D channel type result=40 06:28:11 Set A/D encoding result=40 06:28:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:11 Set channel filter=0.000000e+000 result=40 06:28:11 Config A/D Result=40 06:28:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:11 Get A/D filter: -9.255963e+061 result=40 06:28:11 Get A/D value=-858993460 result=40 06:28:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:11 Parameters OK 06:28:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:11 Set A/D data flow result=40 06:28:11 Set A/D channel type result=40 06:28:11 Set A/D encoding result=40 06:28:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:11 Set channel filter=0.000000e+000 result=40 06:28:11 Config A/D Result=40 06:28:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:11 Get A/D filter: -9.255963e+061 result=40 06:28:11 Get A/D value=-858993460 result=40 06:28:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:11 Aux= 06:28:11 Message to Camera, serial 78944 queued 06:28:48 Received message from Master: op=PointingHead serial=78957 06:28:48 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:28:48 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:28:48 Point started: ret=0 06:28:48 point_skyscan result=0 06:28:49 Check angles 06:28:49 SkyScan query 06:28:49 SkyScan query done: ret=0 az=135.825<-9055 ze=-6.51<-12434 Statuses=0009 0008 06:28:49 Msec=0 True Az=135.825 Ze=-6.51 Az status=0009 Ze status=0008 06:28:50 Check angles 06:28:50 SkyScan query 06:28:50 SkyScan query done: ret=0 az=153.3<-10220 ze=-6.495<-12433 Statuses=0009 0008 06:28:50 Msec=750 True Az=153.3 Ze=-6.495 Az status=0009 Ze status=0008 06:28:50 Check angles 06:28:50 SkyScan query 06:28:51 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 06:28:51 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 06:28:51 Check angles 06:28:51 SkyScan query 06:28:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:28:52 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:28:52 Message to Master queued w/err=0: serial=78957 error=0 06:28:57 Received message from Master: op=Filter serial=78958 06:28:57 Color wheel filter change from 0 to 0 06:28:57 FLIGetFilterPos err=0 currentPosition=0 06:28:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:57 Filter is already there-color wheel unchanged 06:28:57 Received message from Master: op=Shutter serial=78959 06:28:57 Shutter LASER close 06:28:57 Received message from Camera: op=State serial=78961 06:28:57 GetSingleValue result=40 Value=cccccccc 06:28:57 SkyScan query 06:28:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:28:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:57 Parameters OK 06:28:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:57 Set A/D data flow result=40 06:28:57 Set A/D channel type result=40 06:28:57 Set A/D encoding result=40 06:28:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:57 Set channel filter=0.000000e+000 result=40 06:28:57 Config A/D Result=40 06:28:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:57 Get A/D filter: -9.255963e+061 result=40 06:28:57 Get A/D value=-858993460 result=40 06:28:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:57 Parameters OK 06:28:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:57 Set A/D data flow result=40 06:28:57 Set A/D channel type result=40 06:28:57 Set A/D encoding result=40 06:28:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:57 Set channel filter=0.000000e+000 result=40 06:28:57 Config A/D Result=40 06:28:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:57 Get A/D filter: -9.255963e+061 result=40 06:28:57 Get A/D value=-858993460 result=40 06:28:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:57 Aux= 06:28:57 Message to Camera, serial 78961 queued 06:29:34 Received message from Master: op=PointingHead serial=78974 06:29:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:29:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:29:35 Point started: ret=0 06:29:35 point_skyscan result=0 06:29:35 Check angles 06:29:35 SkyScan query 06:29:36 SkyScan query done: ret=0 az=152.79<-10186 ze=6.51<-11566 Statuses=0009 0008 06:29:36 Msec=0 True Az=152.79 Ze=6.51 Az status=0009 Ze status=0008 06:29:36 Check angles 06:29:36 SkyScan query 06:29:37 SkyScan query done: ret=0 az=135.33<-9022 ze=6.495<-11567 Statuses=0009 0008 06:29:37 Msec=750 True Az=135.33 Ze=6.495 Az status=0009 Ze status=0008 06:29:37 Check angles 06:29:37 SkyScan query 06:29:37 SkyScan query done: ret=0 az=117.465<-7831 ze=6.495<-11567 Statuses=0009 0008 06:29:37 Msec=1500 True Az=117.465 Ze=6.495 Az status=0009 Ze status=0008 06:29:38 Check angles 06:29:38 SkyScan query 06:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:29:38 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:29:38 Message to Master queued w/err=0: serial=78974 error=0 06:29:43 Received message from Master: op=Filter serial=78975 06:29:43 Color wheel filter change from 0 to 0 06:29:43 FLIGetFilterPos err=0 currentPosition=0 06:29:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:29:43 Filter is already there-color wheel unchanged 06:29:43 Received message from Master: op=Shutter serial=78976 06:29:43 Shutter LASER close 06:29:43 Received message from Camera: op=State serial=78978 06:29:43 GetSingleValue result=40 Value=cccccccc 06:29:43 SkyScan query 06:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:29:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:44 Parameters OK 06:29:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:44 Set A/D data flow result=40 06:29:44 Set A/D channel type result=40 06:29:44 Set A/D encoding result=40 06:29:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:44 Set channel filter=0.000000e+000 result=40 06:29:44 Config A/D Result=40 06:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:44 Get A/D filter: -9.255963e+061 result=40 06:29:44 Get A/D value=-858993460 result=40 06:29:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:44 Parameters OK 06:29:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:44 Set A/D data flow result=40 06:29:44 Set A/D channel type result=40 06:29:44 Set A/D encoding result=40 06:29:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:44 Set channel filter=0.000000e+000 result=40 06:29:44 Config A/D Result=40 06:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:44 Get A/D filter: -9.255963e+061 result=40 06:29:44 Get A/D value=-858993460 result=40 06:29:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:29:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:29:44 Aux= 06:29:44 Message to Camera, serial 78978 queued 06:30:21 Received message from Master: op=PointingHead serial=78991 06:30:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:30:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:30:21 Point started: ret=0 06:30:21 point_skyscan result=0 06:30:22 Check angles 06:30:22 SkyScan query 06:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.865<-13591 Statuses=0008 0009 06:30:23 Msec=0 True Az=112.995 Ze=-23.865 Az status=0008 Ze status=0009 06:30:23 Check angles 06:30:23 SkyScan query 06:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.805<-14987 Statuses=0008 0009 06:30:23 Msec=750 True Az=112.995 Ze=-44.805 Az status=0008 Ze status=0009 06:30:23 Check angles 06:30:23 SkyScan query 06:30:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 06:30:24 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 06:30:24 Check angles 06:30:24 SkyScan query 06:30:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.7<-17780 Statuses=0008 0009 06:30:25 Msec=2250 True Az=112.995 Ze=-86.7 Az status=0008 Ze status=0009 06:30:25 Check angles 06:30:25 SkyScan query 06:30:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.655<-19177 Statuses=0008 0009 06:30:26 Msec=3000 True Az=112.995 Ze=-107.655 Az status=0008 Ze status=0009 06:30:26 Check angles 06:30:26 SkyScan query 06:30:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 06:30:26 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 06:30:26 Check angles 06:30:26 SkyScan query 06:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-150<-22000 Statuses=0008 0009 06:30:27 Msec=4500 True Az=112.995 Ze=-150 Az status=0008 Ze status=0009 06:30:27 Check angles 06:30:27 SkyScan query 06:30:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0008 0009 06:30:28 Msec=5250 True Az=112.995 Ze=-170.865 Az status=0008 Ze status=0009 06:30:28 Check angles 06:30:28 SkyScan query 06:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:30:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:30:29 Message to Master queued w/err=0: serial=78991 error=0 06:30:34 Received message from Master: op=Filter serial=78992 06:30:34 Color wheel filter change from 0 to 0 06:30:34 FLIGetFilterPos err=0 currentPosition=0 06:30:34 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:34 Filter is already there-color wheel unchanged 06:30:34 Received message from Master: op=Shutter serial=78993 06:30:34 Shutter LASER open 06:30:34 Received message from Camera: op=State serial=78995 06:30:34 GetSingleValue result=40 Value=cccccccc 06:30:34 SkyScan query 06:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:30:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:35 Parameters OK 06:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:35 Set A/D data flow result=40 06:30:35 Set A/D channel type result=40 06:30:35 Set A/D encoding result=40 06:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:35 Set channel filter=0.000000e+000 result=40 06:30:35 Config A/D Result=40 06:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:35 Get A/D filter: -9.255963e+061 result=40 06:30:35 Get A/D value=-858993460 result=40 06:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:35 Parameters OK 06:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:35 Set A/D data flow result=40 06:30:35 Set A/D channel type result=40 06:30:35 Set A/D encoding result=40 06:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:35 Set channel filter=0.000000e+000 result=40 06:30:35 Config A/D Result=40 06:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:35 Get A/D filter: -9.255963e+061 result=40 06:30:35 Get A/D value=-858993460 result=40 06:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:35 Aux= 06:30:35 Message to Camera, serial 78995 queued 06:30:43 Received message from Master: op=Shutter serial=79005 06:30:43 Shutter LASER close 06:30:43 Received message from Master: op=PointingHead serial=79009 06:30:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:30:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:30:44 Point started: ret=0 06:30:44 point_skyscan result=0 06:30:45 Check angles 06:30:45 SkyScan query 06:30:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.86<-21524 Statuses=0008 0009 06:30:45 Msec=0 True Az=112.995 Ze=-142.86 Az status=0008 Ze status=0009 06:30:45 Check angles 06:30:45 SkyScan query 06:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 06:30:46 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 06:30:46 Check angles 06:30:46 SkyScan query 06:30:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.53<-18702 Statuses=0008 0009 06:30:47 Msec=1500 True Az=112.995 Ze=-100.53 Az status=0008 Ze status=0009 06:30:47 Check angles 06:30:47 SkyScan query 06:30:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.56<-17304 Statuses=0008 0009 06:30:47 Msec=2250 True Az=112.995 Ze=-79.56 Az status=0008 Ze status=0009 06:30:48 Check angles 06:30:48 SkyScan query 06:30:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.605<-15907 Statuses=0008 0009 06:30:48 Msec=3000 True Az=112.995 Ze=-58.605 Az status=0008 Ze status=0009 06:30:48 Check angles 06:30:48 SkyScan query 06:30:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.65<-14510 Statuses=0008 0009 06:30:49 Msec=3750 True Az=112.995 Ze=-37.65 Az status=0008 Ze status=0009 06:30:49 Check angles 06:30:49 SkyScan query 06:30:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.71<-13114 Statuses=0008 0009 06:30:50 Msec=4500 True Az=112.995 Ze=-16.71 Az status=0008 Ze status=0009 06:30:50 Check angles 06:30:50 SkyScan query 06:30:50 SkyScan query done: ret=0 az=112.995<-7533 ze=4.23<-11718 Statuses=0008 0009 06:30:50 Msec=5250 True Az=112.995 Ze=4.23 Az status=0008 Ze status=0009 06:30:51 Check angles 06:30:51 SkyScan query 06:30:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:30:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:30:51 Message to Master queued w/err=0: serial=79009 error=0 06:30:56 Received message from Master: op=Filter serial=79010 06:30:56 Color wheel filter change from 0 to 0 06:30:56 FLIGetFilterPos err=0 currentPosition=0 06:30:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:56 Filter is already there-color wheel unchanged 06:30:56 Received message from Master: op=Shutter serial=79011 06:30:56 Shutter LASER close 06:30:56 Received message from Camera: op=State serial=79013 06:30:56 GetSingleValue result=40 Value=cccccccc 06:30:56 SkyScan query 06:30:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:30:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:57 Parameters OK 06:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:57 Set A/D data flow result=40 06:30:57 Set A/D channel type result=40 06:30:57 Set A/D encoding result=40 06:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:57 Set channel filter=0.000000e+000 result=40 06:30:57 Config A/D Result=40 06:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:57 Get A/D filter: -9.255963e+061 result=40 06:30:57 Get A/D value=-858993460 result=40 06:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:57 Parameters OK 06:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:57 Set A/D data flow result=40 06:30:57 Set A/D channel type result=40 06:30:57 Set A/D encoding result=40 06:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:57 Set channel filter=0.000000e+000 result=40 06:30:57 Config A/D Result=40 06:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:57 Get A/D filter: -9.255963e+061 result=40 06:30:57 Get A/D value=-858993460 result=40 06:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:57 Aux= 06:30:57 Message to Camera, serial 79013 queued 06:31:34 Received message from Master: op=PointingHead serial=79026 06:31:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:31:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:31:34 Point started: ret=0 06:31:34 point_skyscan result=0 06:31:35 Check angles 06:31:35 SkyScan query 06:31:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:31:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:31:36 Message to Master queued w/err=0: serial=79026 error=0 06:31:41 Received message from Master: op=Filter serial=79027 06:31:41 Color wheel filter change from 0 to 0 06:31:41 FLIGetFilterPos err=0 currentPosition=0 06:31:41 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:41 Filter is already there-color wheel unchanged 06:31:41 Received message from Master: op=Shutter serial=79028 06:31:41 Shutter LASER close 06:31:41 Received message from Camera: op=State serial=79030 06:31:41 GetSingleValue result=40 Value=cccccccc 06:31:41 SkyScan query 06:31:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:31:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:41 Parameters OK 06:31:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:41 Set A/D data flow result=40 06:31:41 Set A/D channel type result=40 06:31:41 Set A/D encoding result=40 06:31:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:41 Set channel filter=0.000000e+000 result=40 06:31:41 Config A/D Result=40 06:31:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:41 Get A/D filter: -9.255963e+061 result=40 06:31:41 Get A/D value=-858993460 result=40 06:31:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:41 Parameters OK 06:31:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:41 Set A/D data flow result=40 06:31:41 Set A/D channel type result=40 06:31:41 Set A/D encoding result=40 06:31:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:41 Set channel filter=0.000000e+000 result=40 06:31:41 Config A/D Result=40 06:31:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:41 Get A/D filter: -9.255963e+061 result=40 06:31:41 Get A/D value=-858993460 result=40 06:31:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:41 Aux= 06:31:41 Message to Camera, serial 79030 queued 06:32:18 Received message from Master: op=PointingHead serial=79043 06:32:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:32:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:32:18 Point started: ret=0 06:32:18 point_skyscan result=0 06:32:19 Check angles 06:32:19 SkyScan query 06:32:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:32:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:32:20 Message to Master queued w/err=0: serial=79043 error=0 06:32:25 Received message from Master: op=Filter serial=79044 06:32:25 Color wheel filter change from 0 to 0 06:32:25 FLIGetFilterPos err=0 currentPosition=0 06:32:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:25 Filter is already there-color wheel unchanged 06:32:25 Received message from Master: op=Shutter serial=79045 06:32:25 Shutter LASER close 06:32:25 Received message from Camera: op=State serial=79047 06:32:25 GetSingleValue result=40 Value=cccccccc 06:32:25 SkyScan query 06:32:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:32:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:26 Parameters OK 06:32:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:26 Set A/D data flow result=40 06:32:26 Set A/D channel type result=40 06:32:26 Set A/D encoding result=40 06:32:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:26 Set channel filter=0.000000e+000 result=40 06:32:26 Config A/D Result=40 06:32:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:26 Get A/D filter: -9.255963e+061 result=40 06:32:26 Get A/D value=-858993460 result=40 06:32:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:26 Parameters OK 06:32:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:26 Set A/D data flow result=40 06:32:26 Set A/D channel type result=40 06:32:26 Set A/D encoding result=40 06:32:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:26 Set channel filter=0.000000e+000 result=40 06:32:26 Config A/D Result=40 06:32:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:26 Get A/D filter: -9.255963e+061 result=40 06:32:26 Get A/D value=-858993460 result=40 06:32:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:26 Aux= 06:32:26 Message to Camera, serial 79047 queued 06:33:02 Received message from Master: op=PointingHead serial=79060 06:33:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:33:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:33:03 Point started: ret=0 06:33:03 point_skyscan result=0 06:33:04 Check angles 06:33:04 SkyScan query 06:33:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:33:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:33:04 Message to Master queued w/err=0: serial=79060 error=0 06:33:09 Received message from Master: op=Filter serial=79061 06:33:09 Color wheel filter change from 0 to 0 06:33:09 FLIGetFilterPos err=0 currentPosition=0 06:33:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:09 Filter is already there-color wheel unchanged 06:33:09 Received message from Master: op=Shutter serial=79062 06:33:09 Shutter LASER close 06:33:09 Received message from Camera: op=State serial=79064 06:33:09 GetSingleValue result=40 Value=cccccccc 06:33:09 SkyScan query 06:33:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:33:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:10 Parameters OK 06:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:10 Set A/D data flow result=40 06:33:10 Set A/D channel type result=40 06:33:10 Set A/D encoding result=40 06:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:10 Set channel filter=0.000000e+000 result=40 06:33:10 Config A/D Result=40 06:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:10 Get A/D filter: -9.255963e+061 result=40 06:33:10 Get A/D value=-858993460 result=40 06:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:10 Parameters OK 06:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:10 Set A/D data flow result=40 06:33:10 Set A/D channel type result=40 06:33:10 Set A/D encoding result=40 06:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:10 Set channel filter=0.000000e+000 result=40 06:33:10 Config A/D Result=40 06:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:10 Get A/D filter: -9.255963e+061 result=40 06:33:10 Get A/D value=-858993460 result=40 06:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:10 Aux= 06:33:10 Message to Camera, serial 79064 queued 06:33:38 Received message from Master: op=Identify serial=79065 06:33:47 Received message from Master: op=PointingHead serial=79080 06:33:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:33:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:33:47 Point started: ret=0 06:33:47 point_skyscan result=0 06:33:48 Check angles 06:33:48 SkyScan query 06:33:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 06:33:48 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 06:33:49 Check angles 06:33:49 SkyScan query 06:33:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.055<-14937 Statuses=0008 0009 06:33:49 Msec=750 True Az=112.995 Ze=-44.055 Az status=0008 Ze status=0009 06:33:49 Check angles 06:33:49 SkyScan query 06:33:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 06:33:50 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 06:33:50 Check angles 06:33:50 SkyScan query 06:33:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 06:33:51 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 06:33:51 Check angles 06:33:51 SkyScan query 06:33:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.34<-19156 Statuses=0008 0009 06:33:51 Msec=3000 True Az=112.995 Ze=-107.34 Az status=0008 Ze status=0009 06:33:52 Check angles 06:33:52 SkyScan query 06:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.295<-20553 Statuses=0008 0009 06:33:52 Msec=3750 True Az=112.995 Ze=-128.295 Az status=0008 Ze status=0009 06:33:52 Check angles 06:33:52 SkyScan query 06:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 06:33:53 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 06:33:53 Check angles 06:33:53 SkyScan query 06:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 06:33:54 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 06:33:54 Check angles 06:33:54 SkyScan query 06:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:33:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:33:54 Message to Master queued w/err=0: serial=79080 error=0 06:33:59 Received message from Master: op=Filter serial=79081 06:33:59 Color wheel filter change from 0 to 0 06:33:59 FLIGetFilterPos err=0 currentPosition=0 06:33:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:59 Filter is already there-color wheel unchanged 06:34:00 Received message from Master: op=Shutter serial=79082 06:34:00 Shutter LASER open 06:34:00 Received message from Camera: op=State serial=79084 06:34:00 GetSingleValue result=40 Value=cccccccc 06:34:00 SkyScan query 06:34:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:34:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:00 Parameters OK 06:34:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:00 Set A/D data flow result=40 06:34:00 Set A/D channel type result=40 06:34:00 Set A/D encoding result=40 06:34:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:00 Set channel filter=0.000000e+000 result=40 06:34:00 Config A/D Result=40 06:34:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:00 Get A/D filter: -9.255963e+061 result=40 06:34:00 Get A/D value=-858993460 result=40 06:34:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:00 Parameters OK 06:34:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:00 Set A/D data flow result=40 06:34:00 Set A/D channel type result=40 06:34:00 Set A/D encoding result=40 06:34:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:00 Set channel filter=0.000000e+000 result=40 06:34:00 Config A/D Result=40 06:34:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:00 Get A/D filter: -9.255963e+061 result=40 06:34:00 Get A/D value=-858993460 result=40 06:34:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:00 Aux= 06:34:00 Message to Camera, serial 79084 queued 06:34:09 Received message from Master: op=Shutter serial=79094 06:34:09 Shutter LASER close 06:34:09 Received message from Master: op=PointingHead serial=79098 06:34:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:34:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:34:10 Point started: ret=0 06:34:10 point_skyscan result=0 06:34:10 Check angles 06:34:10 SkyScan query 06:34:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 06:34:11 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 06:34:11 Check angles 06:34:11 SkyScan query 06:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 06:34:12 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 06:34:12 Check angles 06:34:12 SkyScan query 06:34:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 [UTC 2019-3-3 06:34:13] 06:34:13 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 06:34:13 Check angles 06:34:13 SkyScan query 06:34:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 06:34:13 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 06:34:13 Check angles 06:34:13 SkyScan query 06:34:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 06:34:14 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 06:34:14 Check angles 06:34:14 SkyScan query 06:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.025<-14535 Statuses=0008 0009 06:34:15 Msec=3750 True Az=112.995 Ze=-38.025 Az status=0008 Ze status=0009 06:34:15 Check angles 06:34:15 SkyScan query 06:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 06:34:16 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 06:34:16 Check angles 06:34:16 SkyScan query 06:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=3.87<-11742 Statuses=0008 0009 06:34:16 Msec=5250 True Az=112.995 Ze=3.87 Az status=0008 Ze status=0009 06:34:16 Check angles 06:34:16 SkyScan query 06:34:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:34:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:34:17 Message to Master queued w/err=0: serial=79098 error=0 06:34:22 Received message from Master: op=Filter serial=79099 06:34:22 Color wheel filter change from 0 to 0 06:34:22 FLIGetFilterPos err=0 currentPosition=0 06:34:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:22 Filter is already there-color wheel unchanged 06:34:22 Received message from Master: op=Shutter serial=79100 06:34:22 Shutter LASER close 06:34:22 Received message from Camera: op=State serial=79102 06:34:22 GetSingleValue result=40 Value=cccccccc 06:34:22 SkyScan query 06:34:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:34:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:23 Parameters OK 06:34:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:23 Set A/D data flow result=40 06:34:23 Set A/D channel type result=40 06:34:23 Set A/D encoding result=40 06:34:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:23 Set channel filter=0.000000e+000 result=40 06:34:23 Config A/D Result=40 06:34:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:23 Get A/D filter: -9.255963e+061 result=40 06:34:23 Get A/D value=-858993460 result=40 06:34:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:23 Parameters OK 06:34:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:23 Set A/D data flow result=40 06:34:23 Set A/D channel type result=40 06:34:23 Set A/D encoding result=40 06:34:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:23 Set channel filter=0.000000e+000 result=40 06:34:23 Config A/D Result=40 06:34:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:23 Get A/D filter: -9.255963e+061 result=40 06:34:23 Get A/D value=-858993460 result=40 06:34:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:23 Aux= 06:34:23 Message to Camera, serial 79102 queued 06:35:00 Received message from Master: op=PointingHead serial=79115 06:35:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:35:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:35:00 Point started: ret=0 06:35:00 point_skyscan result=0 06:35:01 Check angles 06:35:01 SkyScan query 06:35:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:35:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:35:02 Message to Master queued w/err=0: serial=79115 error=0 06:35:07 Received message from Master: op=Filter serial=79116 06:35:07 Color wheel filter change from 0 to 0 06:35:07 FLIGetFilterPos err=0 currentPosition=0 06:35:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:07 Filter is already there-color wheel unchanged 06:35:07 Received message from Master: op=Shutter serial=79117 06:35:07 Shutter LASER close 06:35:07 Received message from Camera: op=State serial=79119 06:35:07 GetSingleValue result=40 Value=cccccccc 06:35:07 SkyScan query 06:35:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:35:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:07 Parameters OK 06:35:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:07 Set A/D data flow result=40 06:35:07 Set A/D channel type result=40 06:35:07 Set A/D encoding result=40 06:35:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:07 Set channel filter=0.000000e+000 result=40 06:35:07 Config A/D Result=40 06:35:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:07 Get A/D filter: -9.255963e+061 result=40 06:35:07 Get A/D value=-858993460 result=40 06:35:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:07 Parameters OK 06:35:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:07 Set A/D data flow result=40 06:35:07 Set A/D channel type result=40 06:35:07 Set A/D encoding result=40 06:35:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:07 Set channel filter=0.000000e+000 result=40 06:35:07 Config A/D Result=40 06:35:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:07 Get A/D filter: -9.255963e+061 result=40 06:35:07 Get A/D value=-858993460 result=40 06:35:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:07 Aux= 06:35:07 Message to Camera, serial 79119 queued 06:35:44 Received message from Master: op=PointingHead serial=79132 06:35:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:35:44 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:35:45 Point started: ret=0 06:35:45 point_skyscan result=0 06:35:45 Check angles 06:35:45 SkyScan query 06:35:46 SkyScan query done: ret=0 az=135.69<-9046 ze=-6.51<-12434 Statuses=0009 0008 06:35:46 Msec=0 True Az=135.69 Ze=-6.51 Az status=0009 Ze status=0008 06:35:46 Check angles 06:35:46 SkyScan query 06:35:47 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.495<-12433 Statuses=0009 0008 06:35:47 Msec=750 True Az=153.285 Ze=-6.495 Az status=0009 Ze status=0008 06:35:47 Check angles 06:35:47 SkyScan query 06:35:47 SkyScan query done: ret=0 az=170.7<-11380 ze=-6.495<-12433 Statuses=0009 0008 06:35:47 Msec=1500 True Az=170.7 Ze=-6.495 Az status=0009 Ze status=0008 06:35:48 Check angles 06:35:48 SkyScan query 06:35:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:35:48 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:35:48 Message to Master queued w/err=0: serial=79132 error=0 06:35:53 Received message from Master: op=Filter serial=79133 06:35:53 Color wheel filter change from 0 to 0 06:35:53 FLIGetFilterPos err=0 currentPosition=0 06:35:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:53 Filter is already there-color wheel unchanged 06:35:53 Received message from Master: op=Shutter serial=79134 06:35:53 Shutter LASER close 06:35:53 Received message from Camera: op=State serial=79136 06:35:53 GetSingleValue result=40 Value=cccccccc 06:35:53 SkyScan query 06:35:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:35:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:54 Parameters OK 06:35:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:54 Set A/D data flow result=40 06:35:54 Set A/D channel type result=40 06:35:54 Set A/D encoding result=40 06:35:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:54 Set channel filter=0.000000e+000 result=40 06:35:54 Config A/D Result=40 06:35:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:54 Get A/D filter: -9.255963e+061 result=40 06:35:54 Get A/D value=-858993460 result=40 06:35:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:54 Parameters OK 06:35:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:54 Set A/D data flow result=40 06:35:54 Set A/D channel type result=40 06:35:54 Set A/D encoding result=40 06:35:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:54 Set channel filter=0.000000e+000 result=40 06:35:54 Config A/D Result=40 06:35:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:54 Get A/D filter: -9.255963e+061 result=40 06:35:54 Get A/D value=-858993460 result=40 06:35:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:54 Aux= 06:35:54 Message to Camera, serial 79136 queued 06:36:31 Received message from Master: op=PointingHead serial=79149 06:36:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:36:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:36:31 Point started: ret=0 06:36:31 point_skyscan result=0 06:36:32 Check angles 06:36:32 SkyScan query 06:36:32 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 06:36:32 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 06:36:33 Check angles 06:36:33 SkyScan query 06:36:33 SkyScan query done: ret=0 az=134.805<-8987 ze=6.495<-11567 Statuses=0009 0008 06:36:33 Msec=750 True Az=134.805 Ze=6.495 Az status=0009 Ze status=0008 06:36:33 Check angles 06:36:33 SkyScan query 06:36:34 SkyScan query done: ret=0 az=117.345<-7823 ze=6.495<-11567 Statuses=0009 0008 06:36:34 Msec=1500 True Az=117.345 Ze=6.495 Az status=0009 Ze status=0008 06:36:34 Check angles 06:36:34 SkyScan query 06:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:36:35 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:36:35 Message to Master queued w/err=0: serial=79149 error=0 06:36:40 Received message from Master: op=Filter serial=79150 06:36:40 Color wheel filter change from 0 to 0 06:36:40 FLIGetFilterPos err=0 currentPosition=0 06:36:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:40 Filter is already there-color wheel unchanged 06:36:40 Received message from Master: op=Shutter serial=79151 06:36:40 Shutter LASER close 06:36:40 Received message from Camera: op=State serial=79153 06:36:40 GetSingleValue result=40 Value=cccccccc 06:36:40 SkyScan query 06:36:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:36:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:41 Parameters OK 06:36:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:41 Set A/D data flow result=40 06:36:41 Set A/D channel type result=40 06:36:41 Set A/D encoding result=40 06:36:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:41 Set channel filter=0.000000e+000 result=40 06:36:41 Config A/D Result=40 06:36:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:41 Get A/D filter: -9.255963e+061 result=40 06:36:41 Get A/D value=-858993460 result=40 06:36:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:41 Parameters OK 06:36:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:41 Set A/D data flow result=40 06:36:41 Set A/D channel type result=40 06:36:41 Set A/D encoding result=40 06:36:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:41 Set channel filter=0.000000e+000 result=40 06:36:41 Config A/D Result=40 06:36:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:41 Get A/D filter: -9.255963e+061 result=40 06:36:41 Get A/D value=-858993460 result=40 06:36:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:41 Aux= 06:36:41 Message to Camera, serial 79153 queued 06:37:17 Received message from Master: op=PointingHead serial=79166 06:37:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:37:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:37:18 Point started: ret=0 06:37:18 point_skyscan result=0 06:37:18 Check angles 06:37:18 SkyScan query 06:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 06:37:19 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 06:37:19 Check angles 06:37:19 SkyScan query 06:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 06:37:20 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 06:37:20 Check angles 06:37:20 SkyScan query 06:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.175<-16345 Statuses=0008 0009 06:37:21 Msec=1500 True Az=112.995 Ze=-65.175 Az status=0008 Ze status=0009 06:37:21 Check angles 06:37:21 SkyScan query 06:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.145<-17743 Statuses=0008 0009 06:37:21 Msec=2250 True Az=112.995 Ze=-86.145 Az status=0008 Ze status=0009 06:37:21 Check angles 06:37:21 SkyScan query 06:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.07<-19138 Statuses=0008 0009 06:37:22 Msec=3000 True Az=112.995 Ze=-107.07 Az status=0008 Ze status=0009 06:37:22 Check angles 06:37:22 SkyScan query 06:37:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.07<-20538 Statuses=0008 0009 06:37:23 Msec=3750 True Az=112.995 Ze=-128.07 Az status=0008 Ze status=0009 06:37:23 Check angles 06:37:23 SkyScan query 06:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.995<-21933 Statuses=0008 0009 06:37:24 Msec=4500 True Az=112.995 Ze=-148.995 Az status=0008 Ze status=0009 06:37:24 Check angles 06:37:24 SkyScan query 06:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.95<-23330 Statuses=0008 0009 06:37:24 Msec=5250 True Az=112.995 Ze=-169.95 Az status=0008 Ze status=0009 06:37:24 Check angles 06:37:24 SkyScan query 06:37:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:37:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:37:25 Message to Master queued w/err=0: serial=79166 error=0 06:37:30 Received message from Master: op=Filter serial=79167 06:37:30 Color wheel filter change from 0 to 0 06:37:30 FLIGetFilterPos err=0 currentPosition=0 06:37:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:30 Filter is already there-color wheel unchanged 06:37:30 Received message from Master: op=Shutter serial=79168 06:37:30 Shutter LASER open 06:37:30 Received message from Camera: op=State serial=79170 06:37:30 GetSingleValue result=40 Value=cccccccc 06:37:30 SkyScan query 06:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:37:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:31 Parameters OK 06:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:31 Set A/D data flow result=40 06:37:31 Set A/D channel type result=40 06:37:31 Set A/D encoding result=40 06:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:31 Set channel filter=0.000000e+000 result=40 06:37:31 Config A/D Result=40 06:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:31 Get A/D filter: -9.255963e+061 result=40 06:37:31 Get A/D value=-858993460 result=40 06:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:31 Parameters OK 06:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:31 Set A/D data flow result=40 06:37:31 Set A/D channel type result=40 06:37:31 Set A/D encoding result=40 06:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:31 Set channel filter=0.000000e+000 result=40 06:37:31 Config A/D Result=40 06:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:31 Get A/D filter: -9.255963e+061 result=40 06:37:31 Get A/D value=-858993460 result=40 06:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:31 Aux= 06:37:31 Message to Camera, serial 79170 queued 06:37:39 Received message from Master: op=Shutter serial=79180 06:37:39 Shutter LASER close 06:37:40 Received message from Master: op=PointingHead serial=79184 06:37:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:37:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:37:40 Point started: ret=0 06:37:40 point_skyscan result=0 06:37:41 Check angles 06:37:41 SkyScan query 06:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 06:37:42 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 06:37:42 Check angles 06:37:42 SkyScan query 06:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 06:37:42 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 06:37:42 Check angles 06:37:42 SkyScan query 06:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 06:37:43 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 06:37:43 Check angles 06:37:43 SkyScan query 06:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.5<-17300 Statuses=0008 0009 06:37:44 Msec=2250 True Az=112.995 Ze=-79.5 Az status=0008 Ze status=0009 06:37:44 Check angles 06:37:44 SkyScan query 06:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 06:37:45 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 06:37:45 Check angles 06:37:45 SkyScan query 06:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.59<-14506 Statuses=0008 0009 06:37:45 Msec=3750 True Az=112.995 Ze=-37.59 Az status=0008 Ze status=0009 06:37:45 Check angles 06:37:45 SkyScan query 06:37:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.2<-13080 Statuses=0008 0009 06:37:46 Msec=4500 True Az=112.995 Ze=-16.2 Az status=0008 Ze status=0009 06:37:46 Check angles 06:37:46 SkyScan query 06:37:47 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 06:37:47 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 06:37:47 Check angles 06:37:47 SkyScan query 06:37:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:37:48 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:37:48 Message to Master queued w/err=0: serial=79184 error=0 06:37:53 Received message from Master: op=Filter serial=79185 06:37:53 Color wheel filter change from 0 to 0 06:37:53 FLIGetFilterPos err=0 currentPosition=0 06:37:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:53 Filter is already there-color wheel unchanged 06:37:53 Received message from Master: op=Shutter serial=79186 06:37:53 Shutter LASER close 06:37:53 Received message from Camera: op=State serial=79188 06:37:53 GetSingleValue result=40 Value=cccccccc 06:37:53 SkyScan query 06:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:37:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:53 Parameters OK 06:37:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:53 Set A/D data flow result=40 06:37:53 Set A/D channel type result=40 06:37:53 Set A/D encoding result=40 06:37:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:53 Set channel filter=0.000000e+000 result=40 06:37:53 Config A/D Result=40 06:37:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:53 Get A/D filter: -9.255963e+061 result=40 06:37:53 Get A/D value=-858993460 result=40 06:37:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:53 Parameters OK 06:37:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:53 Set A/D data flow result=40 06:37:53 Set A/D channel type result=40 06:37:53 Set A/D encoding result=40 06:37:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:53 Set channel filter=0.000000e+000 result=40 06:37:53 Config A/D Result=40 06:37:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:53 Get A/D filter: -9.255963e+061 result=40 06:37:53 Get A/D value=-858993460 result=40 06:37:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:53 Aux= 06:37:53 Message to Camera, serial 79188 queued 06:38:30 Received message from Master: op=PointingHead serial=79201 06:38:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:38:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:38:31 Point started: ret=0 06:38:31 point_skyscan result=0 06:38:31 Check angles 06:38:31 SkyScan query 06:38:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:38:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:38:32 Message to Master queued w/err=0: serial=79201 error=0 06:38:37 Received message from Master: op=Filter serial=79202 06:38:37 Color wheel filter change from 0 to 0 06:38:37 FLIGetFilterPos err=0 currentPosition=0 06:38:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:37 Filter is already there-color wheel unchanged 06:38:37 Received message from Master: op=Shutter serial=79203 06:38:37 Shutter LASER close 06:38:37 Received message from Camera: op=State serial=79205 06:38:37 GetSingleValue result=40 Value=cccccccc 06:38:37 SkyScan query 06:38:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:38:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:38 Parameters OK 06:38:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:38 Set A/D data flow result=40 06:38:38 Set A/D channel type result=40 06:38:38 Set A/D encoding result=40 06:38:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:38 Set channel filter=0.000000e+000 result=40 06:38:38 Config A/D Result=40 06:38:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:38 Get A/D filter: -9.255963e+061 result=40 06:38:38 Get A/D value=-858993460 result=40 06:38:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:38 Parameters OK 06:38:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:38 Set A/D data flow result=40 06:38:38 Set A/D channel type result=40 06:38:38 Set A/D encoding result=40 06:38:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:38 Set channel filter=0.000000e+000 result=40 06:38:38 Config A/D Result=40 06:38:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:38 Get A/D filter: -9.255963e+061 result=40 06:38:38 Get A/D value=-858993460 result=40 06:38:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:38 Aux= 06:38:38 Message to Camera, serial 79205 queued 06:39:15 Received message from Master: op=PointingHead serial=79218 06:39:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:39:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:39:15 Point started: ret=0 06:39:15 point_skyscan result=0 06:39:16 Check angles 06:39:16 SkyScan query 06:39:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:39:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:39:16 Message to Master queued w/err=0: serial=79218 error=0 06:39:21 Received message from Master: op=Filter serial=79219 06:39:21 Color wheel filter change from 0 to 0 06:39:21 FLIGetFilterPos err=0 currentPosition=0 06:39:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:21 Filter is already there-color wheel unchanged 06:39:21 Received message from Master: op=Shutter serial=79220 06:39:21 Shutter LASER close 06:39:21 Received message from Camera: op=State serial=79222 06:39:21 GetSingleValue result=40 Value=cccccccc 06:39:21 SkyScan query 06:39:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:39:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:22 Parameters OK 06:39:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:22 Set A/D data flow result=40 06:39:22 Set A/D channel type result=40 06:39:22 Set A/D encoding result=40 06:39:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:22 Set channel filter=0.000000e+000 result=40 06:39:22 Config A/D Result=40 06:39:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:22 Get A/D filter: -9.255963e+061 result=40 06:39:22 Get A/D value=-858993460 result=40 06:39:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:22 Parameters OK 06:39:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:22 Set A/D data flow result=40 06:39:22 Set A/D channel type result=40 06:39:22 Set A/D encoding result=40 06:39:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:22 Set channel filter=0.000000e+000 result=40 06:39:22 Config A/D Result=40 06:39:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:22 Get A/D filter: -9.255963e+061 result=40 06:39:22 Get A/D value=-858993460 result=40 06:39:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:22 Aux= 06:39:22 Message to Camera, serial 79222 queued 06:39:59 Received message from Master: op=PointingHead serial=79235 06:39:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:39:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:39:59 Point started: ret=0 06:39:59 point_skyscan result=0 06:40:00 Check angles 06:40:00 SkyScan query 06:40:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:40:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:40:01 Message to Master queued w/err=0: serial=79235 error=0 06:40:06 Received message from Master: op=Filter serial=79236 06:40:06 Color wheel filter change from 0 to 0 06:40:06 FLIGetFilterPos err=0 currentPosition=0 06:40:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:06 Filter is already there-color wheel unchanged 06:40:06 Received message from Master: op=Shutter serial=79237 06:40:06 Shutter LASER close 06:40:06 Received message from Camera: op=State serial=79239 06:40:06 GetSingleValue result=40 Value=cccccccc 06:40:06 SkyScan query 06:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:40:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:06 Parameters OK 06:40:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:06 Set A/D data flow result=40 06:40:06 Set A/D channel type result=40 06:40:06 Set A/D encoding result=40 06:40:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:06 Set channel filter=0.000000e+000 result=40 06:40:06 Config A/D Result=40 06:40:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:06 Get A/D filter: -9.255963e+061 result=40 06:40:06 Get A/D value=-858993460 result=40 06:40:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:06 Parameters OK 06:40:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:06 Set A/D data flow result=40 06:40:06 Set A/D channel type result=40 06:40:06 Set A/D encoding result=40 06:40:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:06 Set channel filter=0.000000e+000 result=40 06:40:06 Config A/D Result=40 06:40:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:06 Get A/D filter: -9.255963e+061 result=40 06:40:06 Get A/D value=-858993460 result=40 06:40:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:06 Aux= 06:40:06 Message to Camera, serial 79239 queued 06:40:43 Received message from Master: op=PointingHead serial=79252 06:40:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:40:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:40:44 Point started: ret=0 06:40:44 point_skyscan result=0 06:40:44 Check angles 06:40:44 SkyScan query 06:40:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.4<-13560 Statuses=0008 0009 06:40:45 Msec=0 True Az=112.995 Ze=-23.4 Az status=0008 Ze status=0009 06:40:45 Check angles 06:40:45 SkyScan query 06:40:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.82<-14988 Statuses=0008 0009 06:40:46 Msec=750 True Az=112.995 Ze=-44.82 Az status=0008 Ze status=0009 06:40:46 Check angles 06:40:46 SkyScan query 06:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.21<-16414 Statuses=0008 0009 06:40:47 Msec=1500 True Az=112.995 Ze=-66.21 Az status=0008 Ze status=0009 06:40:47 Check angles 06:40:47 SkyScan query 06:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.585<-17839 Statuses=0008 0009 06:40:47 Msec=2250 True Az=112.995 Ze=-87.585 Az status=0008 Ze status=0009 06:40:47 Check angles 06:40:47 SkyScan query 06:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.525<-19235 Statuses=0008 0009 06:40:48 Msec=3000 True Az=112.995 Ze=-108.525 Az status=0008 Ze status=0009 06:40:48 Check angles 06:40:48 SkyScan query 06:40:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.495<-20633 Statuses=0008 0009 06:40:49 Msec=3750 True Az=112.995 Ze=-129.495 Az status=0008 Ze status=0009 06:40:49 Check angles 06:40:49 SkyScan query 06:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.45<-22030 Statuses=0008 0009 06:40:50 Msec=4500 True Az=112.995 Ze=-150.45 Az status=0008 Ze status=0009 06:40:50 Check angles 06:40:50 SkyScan query 06:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0008 0009 06:40:50 Msec=5250 True Az=112.995 Ze=-171.21 Az status=0008 Ze status=0009 06:40:50 Check angles 06:40:50 SkyScan query 06:40:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:40:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:40:51 Message to Master queued w/err=0: serial=79252 error=0 06:40:56 Received message from Master: op=Filter serial=79253 06:40:56 Color wheel filter change from 0 to 0 06:40:56 FLIGetFilterPos err=0 currentPosition=0 06:40:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:56 Filter is already there-color wheel unchanged 06:40:56 Received message from Master: op=Shutter serial=79254 06:40:56 Shutter LASER open 06:40:56 Received message from Camera: op=State serial=79256 06:40:56 GetSingleValue result=40 Value=cccccccc 06:40:56 SkyScan query 06:40:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:40:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:57 Parameters OK 06:40:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:57 Set A/D data flow result=40 06:40:57 Set A/D channel type result=40 06:40:57 Set A/D encoding result=40 06:40:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:57 Set channel filter=0.000000e+000 result=40 06:40:57 Config A/D Result=40 06:40:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:57 Get A/D filter: -9.255963e+061 result=40 06:40:57 Get A/D value=-858993460 result=40 06:40:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:57 Parameters OK 06:40:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:57 Set A/D data flow result=40 06:40:57 Set A/D channel type result=40 06:40:57 Set A/D encoding result=40 06:40:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:57 Set channel filter=0.000000e+000 result=40 06:40:57 Config A/D Result=40 06:40:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:57 Get A/D filter: -9.255963e+061 result=40 06:40:57 Get A/D value=-858993460 result=40 06:40:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:57 Aux= 06:40:57 Message to Camera, serial 79256 queued 06:41:05 Received message from Master: op=Shutter serial=79266 06:41:05 Shutter LASER close 06:41:06 Received message from Master: op=PointingHead serial=79270 06:41:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:41:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:41:06 Point started: ret=0 06:41:06 point_skyscan result=0 06:41:07 Check angles 06:41:07 SkyScan query 06:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 06:41:08 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 06:41:08 Check angles 06:41:08 SkyScan query 06:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 06:41:08 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 06:41:09 Check angles 06:41:09 SkyScan query 06:41:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 06:41:09 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 06:41:09 Check angles 06:41:09 SkyScan query 06:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 06:41:10 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 06:41:10 Check angles 06:41:10 SkyScan query 06:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 06:41:11 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 06:41:11 Check angles 06:41:11 SkyScan query 06:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 06:41:11 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 06:41:12 Check angles 06:41:12 SkyScan query 06:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 06:41:12 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 06:41:12 Check angles 06:41:12 SkyScan query 06:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 06:41:13 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 06:41:13 Check angles 06:41:13 SkyScan query 06:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:41:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:41:14 Message to Master queued w/err=0: serial=79270 error=0 06:41:19 Received message from Master: op=Filter serial=79271 06:41:19 Color wheel filter change from 0 to 0 06:41:19 FLIGetFilterPos err=0 currentPosition=0 06:41:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:19 Filter is already there-color wheel unchanged 06:41:19 Received message from Master: op=Shutter serial=79272 06:41:19 Shutter LASER close 06:41:19 Received message from Camera: op=State serial=79274 06:41:19 GetSingleValue result=40 Value=cccccccc 06:41:19 SkyScan query 06:41:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:41:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:20 Parameters OK 06:41:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:20 Set A/D data flow result=40 06:41:20 Set A/D channel type result=40 06:41:20 Set A/D encoding result=40 06:41:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:20 Set channel filter=0.000000e+000 result=40 06:41:20 Config A/D Result=40 06:41:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:20 Get A/D filter: -9.255963e+061 result=40 06:41:20 Get A/D value=-858993460 result=40 06:41:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:20 Parameters OK 06:41:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:20 Set A/D data flow result=40 06:41:20 Set A/D channel type result=40 06:41:20 Set A/D encoding result=40 06:41:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:20 Set channel filter=0.000000e+000 result=40 06:41:20 Config A/D Result=40 06:41:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:20 Get A/D filter: -9.255963e+061 result=40 06:41:20 Get A/D value=-858993460 result=40 06:41:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:20 Aux= 06:41:20 Message to Camera, serial 79274 queued 06:41:56 Received message from Master: op=PointingHead serial=79287 06:41:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:41:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:41:57 Point started: ret=0 06:41:57 point_skyscan result=0 06:41:58 Check angles 06:41:58 SkyScan query 06:41:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:41:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:41:58 Message to Master queued w/err=0: serial=79287 error=0 06:42:03 Received message from Master: op=Filter serial=79288 06:42:03 Color wheel filter change from 0 to 0 06:42:03 FLIGetFilterPos err=0 currentPosition=0 06:42:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:03 Filter is already there-color wheel unchanged 06:42:03 Received message from Master: op=Shutter serial=79289 06:42:03 Shutter LASER close 06:42:03 Received message from Camera: op=State serial=79291 06:42:03 GetSingleValue result=40 Value=cccccccc 06:42:03 SkyScan query 06:42:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:42:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:04 Parameters OK 06:42:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:04 Set A/D data flow result=40 06:42:04 Set A/D channel type result=40 06:42:04 Set A/D encoding result=40 06:42:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:04 Set channel filter=0.000000e+000 result=40 06:42:04 Config A/D Result=40 06:42:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:04 Get A/D filter: -9.255963e+061 result=40 06:42:04 Get A/D value=-858993460 result=40 06:42:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:04 Parameters OK 06:42:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:04 Set A/D data flow result=40 06:42:04 Set A/D channel type result=40 06:42:04 Set A/D encoding result=40 06:42:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:04 Set channel filter=0.000000e+000 result=40 06:42:04 Config A/D Result=40 06:42:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:04 Get A/D filter: -9.255963e+061 result=40 06:42:04 Get A/D value=-858993460 result=40 06:42:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:04 Aux= 06:42:04 Message to Camera, serial 79291 queued 06:42:41 Received message from Master: op=PointingHead serial=79304 06:42:41 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:42:41 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:42:41 Point started: ret=0 06:42:41 point_skyscan result=0 06:42:42 Check angles 06:42:42 SkyScan query 06:42:42 SkyScan query done: ret=0 az=136.35<-9090 ze=-6.51<-12434 Statuses=0009 0008 06:42:42 Msec=0 True Az=136.35 Ze=-6.51 Az status=0009 Ze status=0008 06:42:43 Check angles 06:42:43 SkyScan query 06:42:43 SkyScan query done: ret=0 az=154.215<-10281 ze=-6.495<-12433 Statuses=0009 0008 06:42:43 Msec=750 True Az=154.215 Ze=-6.495 Az status=0009 Ze status=0008 06:42:43 Check angles 06:42:43 SkyScan query 06:42:44 SkyScan query done: ret=0 az=171.615<-11441 ze=-6.495<-12433 Statuses=0009 0008 06:42:44 Msec=1500 True Az=171.615 Ze=-6.495 Az status=0009 Ze status=0008 06:42:44 Check angles 06:42:44 SkyScan query 06:42:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:42:45 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:42:45 Message to Master queued w/err=0: serial=79304 error=0 06:42:50 Received message from Master: op=Filter serial=79305 06:42:50 Color wheel filter change from 0 to 0 06:42:50 FLIGetFilterPos err=0 currentPosition=0 06:42:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:50 Filter is already there-color wheel unchanged 06:42:50 Received message from Master: op=Shutter serial=79306 06:42:50 Shutter LASER close 06:42:50 Received message from Camera: op=State serial=79308 06:42:50 GetSingleValue result=40 Value=cccccccc 06:42:50 SkyScan query 06:42:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:42:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:51 Parameters OK 06:42:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:51 Set A/D data flow result=40 06:42:51 Set A/D channel type result=40 06:42:51 Set A/D encoding result=40 06:42:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:51 Set channel filter=0.000000e+000 result=40 06:42:51 Config A/D Result=40 06:42:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:51 Get A/D filter: -9.255963e+061 result=40 06:42:51 Get A/D value=-858993460 result=40 06:42:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:51 Parameters OK 06:42:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:51 Set A/D data flow result=40 06:42:51 Set A/D channel type result=40 06:42:51 Set A/D encoding result=40 06:42:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:51 Set channel filter=0.000000e+000 result=40 06:42:51 Config A/D Result=40 06:42:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:51 Get A/D filter: -9.255963e+061 result=40 06:42:51 Get A/D value=-858993460 result=40 06:42:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:51 Aux= 06:42:51 Message to Camera, serial 79308 queued 06:43:27 Received message from Master: op=PointingHead serial=79321 06:43:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:43:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:43:28 Point started: ret=0 06:43:28 point_skyscan result=0 06:43:28 Check angles 06:43:28 SkyScan query 06:43:29 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 06:43:29 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 06:43:29 Check angles 06:43:29 SkyScan query 06:43:30 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 06:43:30 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 06:43:30 Check angles 06:43:30 SkyScan query 06:43:31 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 06:43:31 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 06:43:31 Check angles 06:43:31 SkyScan query 06:43:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:43:31 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:43:31 Message to Master queued w/err=0: serial=79321 error=0 06:43:36 Received message from Master: op=Filter serial=79322 06:43:36 Color wheel filter change from 0 to 0 06:43:36 FLIGetFilterPos err=0 currentPosition=0 06:43:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:36 Filter is already there-color wheel unchanged 06:43:36 Received message from Master: op=Shutter serial=79323 06:43:36 Shutter LASER close 06:43:37 Received message from Camera: op=State serial=79325 06:43:37 GetSingleValue result=40 Value=cccccccc 06:43:37 SkyScan query 06:43:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:43:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:37 Parameters OK 06:43:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:37 Set A/D data flow result=40 06:43:37 Set A/D channel type result=40 06:43:37 Set A/D encoding result=40 06:43:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:37 Set channel filter=0.000000e+000 result=40 06:43:37 Config A/D Result=40 06:43:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:37 Get A/D filter: -9.255963e+061 result=40 06:43:37 Get A/D value=-858993460 result=40 06:43:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:37 Parameters OK 06:43:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:37 Set A/D data flow result=40 06:43:37 Set A/D channel type result=40 06:43:37 Set A/D encoding result=40 06:43:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:37 Set channel filter=0.000000e+000 result=40 06:43:37 Config A/D Result=40 06:43:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:37 Get A/D filter: -9.255963e+061 result=40 06:43:37 Get A/D value=-858993460 result=40 06:43:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:37 Aux= 06:43:37 Message to Camera, serial 79325 queued [UTC 2019-3-3 06:43:50] 06:44:14 Received message from Master: op=PointingHead serial=79338 06:44:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:44:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:44:14 Point started: ret=0 06:44:14 point_skyscan result=0 06:44:15 Check angles 06:44:15 SkyScan query 06:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 06:44:16 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 06:44:16 Check angles 06:44:16 SkyScan query 06:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 06:44:16 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 06:44:17 Check angles 06:44:17 SkyScan query 06:44:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.25<-16350 Statuses=0008 0009 06:44:17 Msec=1500 True Az=112.995 Ze=-65.25 Az status=0008 Ze status=0009 06:44:17 Check angles 06:44:17 SkyScan query 06:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 06:44:18 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 06:44:18 Check angles 06:44:18 SkyScan query 06:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.015<-19201 Statuses=0008 0009 06:44:19 Msec=3000 True Az=112.995 Ze=-108.015 Az status=0008 Ze status=0009 06:44:19 Check angles 06:44:19 SkyScan query 06:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.405<-20627 Statuses=0008 0009 06:44:19 Msec=3750 True Az=112.995 Ze=-129.405 Az status=0008 Ze status=0009 06:44:20 Check angles 06:44:20 SkyScan query 06:44:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 06:44:20 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 06:44:20 Check angles 06:44:20 SkyScan query 06:44:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 06:44:21 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 06:44:21 Check angles 06:44:21 SkyScan query 06:44:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:44:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:44:22 Message to Master queued w/err=0: serial=79338 error=0 06:44:27 Received message from Master: op=Filter serial=79339 06:44:27 Color wheel filter change from 0 to 0 06:44:27 FLIGetFilterPos err=0 currentPosition=0 06:44:27 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:27 Filter is already there-color wheel unchanged 06:44:27 Received message from Master: op=Shutter serial=79340 06:44:27 Shutter LASER open 06:44:27 Received message from Camera: op=State serial=79342 06:44:27 GetSingleValue result=40 Value=cccccccc 06:44:27 SkyScan query 06:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:44:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:28 Parameters OK 06:44:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:28 Set A/D data flow result=40 06:44:28 Set A/D channel type result=40 06:44:28 Set A/D encoding result=40 06:44:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:28 Set channel filter=0.000000e+000 result=40 06:44:28 Config A/D Result=40 06:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:28 Get A/D filter: -9.255963e+061 result=40 06:44:28 Get A/D value=-858993460 result=40 06:44:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:28 Parameters OK 06:44:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:28 Set A/D data flow result=40 06:44:28 Set A/D channel type result=40 06:44:28 Set A/D encoding result=40 06:44:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:28 Set channel filter=0.000000e+000 result=40 06:44:28 Config A/D Result=40 06:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:28 Get A/D filter: -9.255963e+061 result=40 06:44:28 Get A/D value=-858993460 result=40 06:44:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:28 Aux= 06:44:28 Message to Camera, serial 79342 queued 06:44:35 Received message from Master: op=Shutter serial=79351 06:44:35 Shutter LASER close 06:44:36 Received message from Master: op=PointingHead serial=79355 06:44:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:44:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:44:36 Point started: ret=0 06:44:36 point_skyscan result=0 06:44:37 Check angles 06:44:37 SkyScan query 06:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.935<-21529 Statuses=0008 0009 06:44:37 Msec=0 True Az=112.995 Ze=-142.935 Az status=0008 Ze status=0009 06:44:37 Check angles 06:44:37 SkyScan query 06:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.545<-20103 Statuses=0008 0009 06:44:38 Msec=750 True Az=112.995 Ze=-121.545 Az status=0008 Ze status=0009 06:44:38 Check angles 06:44:38 SkyScan query 06:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.62<-18708 Statuses=0008 0009 06:44:39 Msec=1500 True Az=112.995 Ze=-100.62 Az status=0008 Ze status=0009 06:44:39 Check angles 06:44:39 SkyScan query 06:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.2<-17280 Statuses=0008 0009 06:44:39 Msec=2250 True Az=112.995 Ze=-79.2 Az status=0008 Ze status=0009 06:44:40 Check angles 06:44:40 SkyScan query 06:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.23<-15882 Statuses=0008 0009 06:44:40 Msec=3000 True Az=112.995 Ze=-58.23 Az status=0008 Ze status=0009 06:44:40 Check angles 06:44:40 SkyScan query 06:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.305<-14487 Statuses=0008 0009 06:44:41 Msec=3750 True Az=112.995 Ze=-37.305 Az status=0008 Ze status=0009 06:44:41 Check angles 06:44:41 SkyScan query 06:44:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.335<-13089 Statuses=0008 0009 06:44:42 Msec=4500 True Az=112.995 Ze=-16.335 Az status=0008 Ze status=0009 06:44:42 Check angles 06:44:42 SkyScan query 06:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=4.815<-11679 Statuses=0008 0009 06:44:43 Msec=5250 True Az=112.995 Ze=4.815 Az status=0008 Ze status=0009 06:44:43 Check angles 06:44:43 SkyScan query 06:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:44:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:44:43 Message to Master queued w/err=0: serial=79355 error=0 06:44:48 Received message from Master: op=Filter serial=79356 06:44:48 Color wheel filter change from 0 to 0 06:44:48 FLIGetFilterPos err=0 currentPosition=0 06:44:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:48 Filter is already there-color wheel unchanged 06:44:48 Received message from Master: op=Shutter serial=79357 06:44:48 Shutter LASER close 06:44:49 Received message from Camera: op=State serial=79359 06:44:49 GetSingleValue result=40 Value=cccccccc 06:44:49 SkyScan query 06:44:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:44:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:49 Parameters OK 06:44:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:49 Set A/D data flow result=40 06:44:49 Set A/D channel type result=40 06:44:49 Set A/D encoding result=40 06:44:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:49 Set channel filter=0.000000e+000 result=40 06:44:49 Config A/D Result=40 06:44:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:49 Get A/D filter: -9.255963e+061 result=40 06:44:49 Get A/D value=-858993460 result=40 06:44:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:49 Parameters OK 06:44:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:49 Set A/D data flow result=40 06:44:49 Set A/D channel type result=40 06:44:49 Set A/D encoding result=40 06:44:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:49 Set channel filter=0.000000e+000 result=40 06:44:49 Config A/D Result=40 06:44:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:49 Get A/D filter: -9.255963e+061 result=40 06:44:49 Get A/D value=-858993460 result=40 06:44:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:49 Aux= 06:44:49 Message to Camera, serial 79359 queued 06:45:26 Received message from Master: op=PointingHead serial=79372 06:45:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:45:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:45:26 Point started: ret=0 06:45:26 point_skyscan result=0 06:45:27 Check angles 06:45:27 SkyScan query 06:45:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:45:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:45:28 Message to Master queued w/err=0: serial=79372 error=0 06:45:33 Received message from Master: op=Filter serial=79373 06:45:33 Color wheel filter change from 0 to 0 06:45:33 FLIGetFilterPos err=0 currentPosition=0 06:45:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:33 Filter is already there-color wheel unchanged 06:45:33 Received message from Master: op=Shutter serial=79374 06:45:33 Shutter LASER close 06:45:33 Received message from Camera: op=State serial=79376 06:45:33 GetSingleValue result=40 Value=cccccccc 06:45:33 SkyScan query 06:45:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:45:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:33 Parameters OK 06:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:33 Set A/D data flow result=40 06:45:33 Set A/D channel type result=40 06:45:33 Set A/D encoding result=40 06:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:33 Set channel filter=0.000000e+000 result=40 06:45:33 Config A/D Result=40 06:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:33 Get A/D filter: -9.255963e+061 result=40 06:45:33 Get A/D value=-858993460 result=40 06:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:33 Parameters OK 06:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:33 Set A/D data flow result=40 06:45:33 Set A/D channel type result=40 06:45:33 Set A/D encoding result=40 06:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:33 Set channel filter=0.000000e+000 result=40 06:45:33 Config A/D Result=40 06:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:33 Get A/D filter: -9.255963e+061 result=40 06:45:33 Get A/D value=-858993460 result=40 06:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:33 Aux= 06:45:33 Message to Camera, serial 79376 queued 06:46:10 Received message from Master: op=PointingHead serial=79389 06:46:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:46:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:46:11 Point started: ret=0 06:46:11 point_skyscan result=0 06:46:11 Check angles 06:46:11 SkyScan query 06:46:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:46:12 Message to Master queued w/err=0: serial=79389 error=0 06:46:17 Received message from Master: op=Filter serial=79390 06:46:17 Color wheel filter change from 0 to 0 06:46:17 FLIGetFilterPos err=0 currentPosition=0 06:46:17 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:17 Filter is already there-color wheel unchanged 06:46:17 Received message from Master: op=Shutter serial=79391 06:46:17 Shutter LASER close 06:46:17 Received message from Camera: op=State serial=79393 06:46:17 GetSingleValue result=40 Value=cccccccc 06:46:17 SkyScan query 06:46:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:18 Parameters OK 06:46:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:18 Set A/D data flow result=40 06:46:18 Set A/D channel type result=40 06:46:18 Set A/D encoding result=40 06:46:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:18 Set channel filter=0.000000e+000 result=40 06:46:18 Config A/D Result=40 06:46:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:18 Get A/D filter: -9.255963e+061 result=40 06:46:18 Get A/D value=-858993460 result=40 06:46:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:18 Parameters OK 06:46:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:18 Set A/D data flow result=40 06:46:18 Set A/D channel type result=40 06:46:18 Set A/D encoding result=40 06:46:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:18 Set channel filter=0.000000e+000 result=40 06:46:18 Config A/D Result=40 06:46:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:18 Get A/D filter: -9.255963e+061 result=40 06:46:18 Get A/D value=-858993460 result=40 06:46:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:18 Aux= 06:46:18 Message to Camera, serial 79393 queued 06:46:55 Received message from Master: op=PointingHead serial=79406 06:46:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:46:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:46:55 Point started: ret=0 06:46:55 point_skyscan result=0 06:46:56 Check angles 06:46:56 SkyScan query 06:46:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:46:56 Message to Master queued w/err=0: serial=79406 error=0 06:47:01 Received message from Master: op=Filter serial=79407 06:47:01 Color wheel filter change from 0 to 0 06:47:01 FLIGetFilterPos err=0 currentPosition=0 06:47:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:01 Filter is already there-color wheel unchanged 06:47:01 Received message from Master: op=Shutter serial=79408 06:47:01 Shutter LASER close 06:47:01 Received message from Camera: op=State serial=79410 06:47:01 GetSingleValue result=40 Value=cccccccc 06:47:01 SkyScan query 06:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:47:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:02 Parameters OK 06:47:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:02 Set A/D data flow result=40 06:47:02 Set A/D channel type result=40 06:47:02 Set A/D encoding result=40 06:47:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:02 Set channel filter=0.000000e+000 result=40 06:47:02 Config A/D Result=40 06:47:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:02 Get A/D filter: -9.255963e+061 result=40 06:47:02 Get A/D value=-858993460 result=40 06:47:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:02 Parameters OK 06:47:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:02 Set A/D data flow result=40 06:47:02 Set A/D channel type result=40 06:47:02 Set A/D encoding result=40 06:47:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:02 Set channel filter=0.000000e+000 result=40 06:47:02 Config A/D Result=40 06:47:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:02 Get A/D filter: -9.255963e+061 result=40 06:47:02 Get A/D value=-858993460 result=40 06:47:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:02 Aux= 06:47:02 Message to Camera, serial 79410 queued 06:47:39 Received message from Master: op=PointingHead serial=79423 06:47:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:47:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:47:39 Point started: ret=0 06:47:39 point_skyscan result=0 06:47:40 Check angles 06:47:40 SkyScan query 06:47:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 06:47:41 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 06:47:41 Check angles 06:47:41 SkyScan query 06:47:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 06:47:41 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 06:47:42 Check angles 06:47:42 SkyScan query 06:47:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.685<-16379 Statuses=0008 0009 06:47:42 Msec=1500 True Az=112.995 Ze=-65.685 Az status=0008 Ze status=0009 06:47:42 Check angles 06:47:42 SkyScan query 06:47:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 06:47:43 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 06:47:43 Check angles 06:47:43 SkyScan query 06:47:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.03<-19202 Statuses=0008 0009 06:47:44 Msec=3000 True Az=112.995 Ze=-108.03 Az status=0008 Ze status=0009 06:47:44 Check angles 06:47:44 SkyScan query 06:47:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.97<-20598 Statuses=0008 0009 06:47:44 Msec=3750 True Az=112.995 Ze=-128.97 Az status=0008 Ze status=0009 06:47:45 Check angles 06:47:45 SkyScan query 06:47:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 06:47:45 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 06:47:45 Check angles 06:47:45 SkyScan query 06:47:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.15<-23410 Statuses=0008 0009 06:47:46 Msec=5250 True Az=112.995 Ze=-171.15 Az status=0008 Ze status=0009 06:47:46 Check angles 06:47:46 SkyScan query 06:47:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:47:47 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:47:47 Message to Master queued w/err=0: serial=79423 error=0 06:47:52 Received message from Master: op=Filter serial=79424 06:47:52 Color wheel filter change from 0 to 0 06:47:52 FLIGetFilterPos err=0 currentPosition=0 06:47:52 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:52 Filter is already there-color wheel unchanged 06:47:52 Received message from Master: op=Shutter serial=79425 06:47:52 Shutter LASER open 06:47:52 Received message from Camera: op=State serial=79427 06:47:52 GetSingleValue result=40 Value=cccccccc 06:47:52 SkyScan query 06:47:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:47:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:53 Parameters OK 06:47:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:53 Set A/D data flow result=40 06:47:53 Set A/D channel type result=40 06:47:53 Set A/D encoding result=40 06:47:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:53 Set channel filter=0.000000e+000 result=40 06:47:53 Config A/D Result=40 06:47:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:53 Get A/D filter: -9.255963e+061 result=40 06:47:53 Get A/D value=-858993460 result=40 06:47:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:53 Parameters OK 06:47:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:53 Set A/D data flow result=40 06:47:53 Set A/D channel type result=40 06:47:53 Set A/D encoding result=40 06:47:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:53 Set channel filter=0.000000e+000 result=40 06:47:53 Config A/D Result=40 06:47:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:53 Get A/D filter: -9.255963e+061 result=40 06:47:53 Get A/D value=-858993460 result=40 06:47:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:53 Aux= 06:47:53 Message to Camera, serial 79427 queued 06:48:01 Received message from Master: op=Shutter serial=79437 06:48:01 Shutter LASER close 06:48:02 Received message from Master: op=PointingHead serial=79441 06:48:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:48:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:48:02 Point started: ret=0 06:48:02 point_skyscan result=0 06:48:03 Check angles 06:48:03 SkyScan query 06:48:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 06:48:03 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 06:48:03 Check angles 06:48:03 SkyScan query 06:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 06:48:04 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 06:48:04 Check angles 06:48:04 SkyScan query 06:48:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 06:48:05 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 06:48:05 Check angles 06:48:05 SkyScan query 06:48:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.95<-17330 Statuses=0008 0009 06:48:05 Msec=2250 True Az=112.995 Ze=-79.95 Az status=0008 Ze status=0009 06:48:06 Check angles 06:48:06 SkyScan query 06:48:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.98<-15932 Statuses=0008 0009 06:48:06 Msec=3000 True Az=112.995 Ze=-58.98 Az status=0008 Ze status=0009 06:48:06 Check angles 06:48:06 SkyScan query 06:48:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.575<-14505 Statuses=0008 0009 06:48:07 Msec=3750 True Az=112.995 Ze=-37.575 Az status=0008 Ze status=0009 06:48:07 Check angles 06:48:07 SkyScan query 06:48:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.605<-13107 Statuses=0008 0009 06:48:08 Msec=4500 True Az=112.995 Ze=-16.605 Az status=0008 Ze status=0009 06:48:08 Check angles 06:48:08 SkyScan query 06:48:08 SkyScan query done: ret=0 az=112.995<-7533 ze=4.29<-11714 Statuses=0008 0009 06:48:08 Msec=5250 True Az=112.995 Ze=4.29 Az status=0008 Ze status=0009 06:48:09 Check angles 06:48:09 SkyScan query 06:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:48:09 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:48:09 Message to Master queued w/err=0: serial=79441 error=0 06:48:14 Received message from Master: op=Filter serial=79442 06:48:14 Color wheel filter change from 0 to 0 06:48:14 FLIGetFilterPos err=0 currentPosition=0 06:48:14 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:14 Filter is already there-color wheel unchanged 06:48:14 Received message from Master: op=Shutter serial=79443 06:48:14 Shutter LASER close 06:48:15 Received message from Camera: op=State serial=79445 06:48:15 GetSingleValue result=40 Value=cccccccc 06:48:15 SkyScan query 06:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:48:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:15 Parameters OK 06:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:15 Set A/D data flow result=40 06:48:15 Set A/D channel type result=40 06:48:15 Set A/D encoding result=40 06:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:15 Set channel filter=0.000000e+000 result=40 06:48:15 Config A/D Result=40 06:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:15 Get A/D filter: -9.255963e+061 result=40 06:48:15 Get A/D value=-858993460 result=40 06:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:15 Parameters OK 06:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:15 Set A/D data flow result=40 06:48:15 Set A/D channel type result=40 06:48:15 Set A/D encoding result=40 06:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:15 Set channel filter=0.000000e+000 result=40 06:48:15 Config A/D Result=40 06:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:15 Get A/D filter: -9.255963e+061 result=40 06:48:15 Get A/D value=-858993460 result=40 06:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:15 Aux= 06:48:15 Message to Camera, serial 79445 queued 06:48:52 Received message from Master: op=PointingHead serial=79458 06:48:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:48:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:48:52 Point started: ret=0 06:48:52 point_skyscan result=0 06:48:53 Check angles 06:48:53 SkyScan query 06:48:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:48:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:48:54 Message to Master queued w/err=0: serial=79458 error=0 06:48:59 Received message from Master: op=Filter serial=79459 06:48:59 Color wheel filter change from 0 to 0 06:48:59 FLIGetFilterPos err=0 currentPosition=0 06:48:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:59 Filter is already there-color wheel unchanged 06:48:59 Received message from Master: op=Shutter serial=79460 06:48:59 Shutter LASER close 06:48:59 Received message from Camera: op=State serial=79462 06:48:59 GetSingleValue result=40 Value=cccccccc 06:48:59 SkyScan query 06:49:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:49:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:00 Parameters OK 06:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:00 Set A/D data flow result=40 06:49:00 Set A/D channel type result=40 06:49:00 Set A/D encoding result=40 06:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:00 Set channel filter=0.000000e+000 result=40 06:49:00 Config A/D Result=40 06:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:00 Get A/D filter: -9.255963e+061 result=40 06:49:00 Get A/D value=-858993460 result=40 06:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:00 Parameters OK 06:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:00 Set A/D data flow result=40 06:49:00 Set A/D channel type result=40 06:49:00 Set A/D encoding result=40 06:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:00 Set channel filter=0.000000e+000 result=40 06:49:00 Config A/D Result=40 06:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:00 Get A/D filter: -9.255963e+061 result=40 06:49:00 Get A/D value=-858993460 result=40 06:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:00 Aux= 06:49:00 Message to Camera, serial 79462 queued 06:49:36 Received message from Master: op=PointingHead serial=79475 06:49:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:49:36 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:49:37 Point started: ret=0 06:49:37 point_skyscan result=0 06:49:38 Check angles 06:49:38 SkyScan query 06:49:38 SkyScan query done: ret=0 az=136.23<-9082 ze=-6.51<-12434 Statuses=0009 0008 06:49:38 Msec=0 True Az=136.23 Ze=-6.51 Az status=0009 Ze status=0008 06:49:38 Check angles 06:49:38 SkyScan query 06:49:39 SkyScan query done: ret=0 az=154.08<-10272 ze=-6.495<-12433 Statuses=0009 0008 06:49:39 Msec=750 True Az=154.08 Ze=-6.495 Az status=0009 Ze status=0008 06:49:39 Check angles 06:49:39 SkyScan query 06:49:40 SkyScan query done: ret=0 az=171.51<-11434 ze=-6.495<-12433 Statuses=0009 0008 06:49:40 Msec=1500 True Az=171.51 Ze=-6.495 Az status=0009 Ze status=0008 06:49:40 Check angles 06:49:40 SkyScan query 06:49:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:49:40 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:49:40 Message to Master queued w/err=0: serial=79475 error=0 06:49:45 Received message from Master: op=Filter serial=79476 06:49:45 Color wheel filter change from 0 to 0 06:49:45 FLIGetFilterPos err=0 currentPosition=0 06:49:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:49:45 Filter is already there-color wheel unchanged 06:49:46 Received message from Master: op=Shutter serial=79477 06:49:46 Shutter LASER close 06:49:46 Received message from Camera: op=State serial=79479 06:49:46 GetSingleValue result=40 Value=cccccccc 06:49:46 SkyScan query 06:49:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:49:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:46 Parameters OK 06:49:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:46 Set A/D data flow result=40 06:49:46 Set A/D channel type result=40 06:49:46 Set A/D encoding result=40 06:49:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:46 Set channel filter=0.000000e+000 result=40 06:49:46 Config A/D Result=40 06:49:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:46 Get A/D filter: -9.255963e+061 result=40 06:49:46 Get A/D value=-858993460 result=40 06:49:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:46 Parameters OK 06:49:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:46 Set A/D data flow result=40 06:49:46 Set A/D channel type result=40 06:49:46 Set A/D encoding result=40 06:49:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:46 Set channel filter=0.000000e+000 result=40 06:49:46 Config A/D Result=40 06:49:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:46 Get A/D filter: -9.255963e+061 result=40 06:49:46 Get A/D value=-858993460 result=40 06:49:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:46 Aux= 06:49:46 Message to Camera, serial 79479 queued 06:50:23 Received message from Master: op=PointingHead serial=79492 06:50:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:50:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:50:23 Point started: ret=0 06:50:23 point_skyscan result=0 06:50:24 Check angles 06:50:24 SkyScan query 06:50:25 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 06:50:25 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 06:50:25 Check angles 06:50:25 SkyScan query 06:50:25 SkyScan query done: ret=0 az=135.39<-9026 ze=6.495<-11567 Statuses=0009 0008 06:50:25 Msec=750 True Az=135.39 Ze=6.495 Az status=0009 Ze status=0008 06:50:26 Check angles 06:50:26 SkyScan query 06:50:26 SkyScan query done: ret=0 az=117.93<-7862 ze=6.495<-11567 Statuses=0009 0008 06:50:26 Msec=1500 True Az=117.93 Ze=6.495 Az status=0009 Ze status=0008 06:50:26 Check angles 06:50:26 SkyScan query 06:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:50:27 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:50:27 Message to Master queued w/err=0: serial=79492 error=0 06:50:32 Received message from Master: op=Filter serial=79493 06:50:32 Color wheel filter change from 0 to 0 06:50:32 FLIGetFilterPos err=0 currentPosition=0 06:50:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:32 Filter is already there-color wheel unchanged 06:50:32 Received message from Master: op=Shutter serial=79494 06:50:32 Shutter LASER close 06:50:32 Received message from Camera: op=State serial=79496 06:50:32 GetSingleValue result=40 Value=cccccccc 06:50:32 SkyScan query 06:50:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:50:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:33 Parameters OK 06:50:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:33 Set A/D data flow result=40 06:50:33 Set A/D channel type result=40 06:50:33 Set A/D encoding result=40 06:50:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:33 Set channel filter=0.000000e+000 result=40 06:50:33 Config A/D Result=40 06:50:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:33 Get A/D filter: -9.255963e+061 result=40 06:50:33 Get A/D value=-858993460 result=40 06:50:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:33 Parameters OK 06:50:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:33 Set A/D data flow result=40 06:50:33 Set A/D channel type result=40 06:50:33 Set A/D encoding result=40 06:50:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:33 Set channel filter=0.000000e+000 result=40 06:50:33 Config A/D Result=40 06:50:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:33 Get A/D filter: -9.255963e+061 result=40 06:50:33 Get A/D value=-858993460 result=40 06:50:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:33 Aux= 06:50:33 Message to Camera, serial 79496 queued 06:51:10 Received message from Master: op=PointingHead serial=79509 06:51:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:51:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:51:10 Point started: ret=0 06:51:10 point_skyscan result=0 06:51:11 Check angles 06:51:11 SkyScan query 06:51:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 06:51:11 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 06:51:11 Check angles 06:51:11 SkyScan query 06:51:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 06:51:12 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 06:51:12 Check angles 06:51:12 SkyScan query 06:51:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 06:51:13 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 06:51:13 Check angles 06:51:13 SkyScan query 06:51:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 06:51:13 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 06:51:14 Check angles 06:51:14 SkyScan query 06:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.31<-19154 Statuses=0008 0009 06:51:14 Msec=3000 True Az=112.995 Ze=-107.31 Az status=0008 Ze status=0009 06:51:14 Check angles 06:51:14 SkyScan query 06:51:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.265<-20551 Statuses=0008 0009 06:51:15 Msec=3750 True Az=112.995 Ze=-128.265 Az status=0008 Ze status=0009 06:51:15 Check angles 06:51:15 SkyScan query 06:51:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.22<-21948 Statuses=0008 0009 06:51:16 Msec=4500 True Az=112.995 Ze=-149.22 Az status=0008 Ze status=0009 06:51:16 Check angles 06:51:16 SkyScan query 06:51:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.175<-23345 Statuses=0008 0009 06:51:16 Msec=5250 True Az=112.995 Ze=-170.175 Az status=0008 Ze status=0009 06:51:17 Check angles 06:51:17 SkyScan query 06:51:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:51:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:51:17 Message to Master queued w/err=0: serial=79509 error=0 06:51:22 Received message from Master: op=Filter serial=79510 06:51:22 Color wheel filter change from 0 to 0 06:51:22 FLIGetFilterPos err=0 currentPosition=0 06:51:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:22 Filter is already there-color wheel unchanged 06:51:22 Received message from Master: op=Shutter serial=79511 06:51:22 Shutter LASER open 06:51:23 Received message from Camera: op=State serial=79513 06:51:23 GetSingleValue result=40 Value=cccccccc 06:51:23 SkyScan query 06:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:51:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:23 Parameters OK 06:51:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:23 Set A/D data flow result=40 06:51:23 Set A/D channel type result=40 06:51:23 Set A/D encoding result=40 06:51:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:23 Set channel filter=0.000000e+000 result=40 06:51:23 Config A/D Result=40 06:51:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:23 Get A/D filter: -9.255963e+061 result=40 06:51:23 Get A/D value=-858993460 result=40 06:51:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:23 Parameters OK 06:51:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:23 Set A/D data flow result=40 06:51:23 Set A/D channel type result=40 06:51:23 Set A/D encoding result=40 06:51:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:23 Set channel filter=0.000000e+000 result=40 06:51:23 Config A/D Result=40 06:51:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:23 Get A/D filter: -9.255963e+061 result=40 06:51:23 Get A/D value=-858993460 result=40 06:51:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:23 Aux= 06:51:23 Message to Camera, serial 79513 queued 06:51:32 Received message from Master: op=Shutter serial=79523 06:51:32 Shutter LASER close 06:51:32 Received message from Master: op=PointingHead serial=79527 06:51:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:51:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:51:32 Point started: ret=0 06:51:32 point_skyscan result=0 06:51:33 Check angles 06:51:33 SkyScan query 06:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 06:51:34 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 06:51:34 Check angles 06:51:34 SkyScan query 06:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 06:51:34 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 06:51:35 Check angles 06:51:35 SkyScan query 06:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 06:51:35 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 06:51:35 Check angles 06:51:35 SkyScan query 06:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 06:51:36 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 06:51:36 Check angles 06:51:36 SkyScan query 06:51:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 06:51:37 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 06:51:37 Check angles 06:51:37 SkyScan query 06:51:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.25<-14550 Statuses=0008 0009 06:51:37 Msec=3750 True Az=112.995 Ze=-38.25 Az status=0008 Ze status=0009 06:51:38 Check angles 06:51:38 SkyScan query 06:51:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 06:51:38 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 06:51:38 Check angles 06:51:38 SkyScan query 06:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=4.08<-11728 Statuses=0008 0009 06:51:39 Msec=5250 True Az=112.995 Ze=4.08 Az status=0008 Ze status=0009 06:51:39 Check angles 06:51:39 SkyScan query 06:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:51:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:51:40 Message to Master queued w/err=0: serial=79527 error=0 06:51:45 Received message from Master: op=Filter serial=79528 06:51:45 Color wheel filter change from 0 to 0 06:51:45 FLIGetFilterPos err=0 currentPosition=0 06:51:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:45 Filter is already there-color wheel unchanged 06:51:45 Received message from Master: op=Shutter serial=79529 06:51:45 Shutter LASER close 06:51:45 Received message from Camera: op=State serial=79531 06:51:45 GetSingleValue result=40 Value=cccccccc 06:51:45 SkyScan query 06:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:51:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:46 Parameters OK 06:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:46 Set A/D data flow result=40 06:51:46 Set A/D channel type result=40 06:51:46 Set A/D encoding result=40 06:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:46 Set channel filter=0.000000e+000 result=40 06:51:46 Config A/D Result=40 06:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:46 Get A/D filter: -9.255963e+061 result=40 06:51:46 Get A/D value=-858993460 result=40 06:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:46 Parameters OK 06:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:46 Set A/D data flow result=40 06:51:46 Set A/D channel type result=40 06:51:46 Set A/D encoding result=40 06:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:46 Set channel filter=0.000000e+000 result=40 06:51:46 Config A/D Result=40 06:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:46 Get A/D filter: -9.255963e+061 result=40 06:51:46 Get A/D value=-858993460 result=40 06:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:46 Aux= 06:51:46 Message to Camera, serial 79531 queued 06:52:22 Received message from Master: op=PointingHead serial=79544 06:52:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:52:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:52:23 Point started: ret=0 06:52:23 point_skyscan result=0 06:52:23 Check angles 06:52:23 SkyScan query 06:52:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:52:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:52:24 Message to Master queued w/err=0: serial=79544 error=0 06:52:29 Received message from Master: op=Filter serial=79545 06:52:29 Color wheel filter change from 0 to 0 06:52:29 FLIGetFilterPos err=0 currentPosition=0 06:52:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:29 Filter is already there-color wheel unchanged 06:52:29 Received message from Master: op=Shutter serial=79546 06:52:29 Shutter LASER close 06:52:29 Received message from Camera: op=State serial=79548 06:52:29 GetSingleValue result=40 Value=cccccccc 06:52:29 SkyScan query 06:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:52:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:30 Parameters OK 06:52:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:30 Set A/D data flow result=40 06:52:30 Set A/D channel type result=40 06:52:30 Set A/D encoding result=40 06:52:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:30 Set channel filter=0.000000e+000 result=40 06:52:30 Config A/D Result=40 06:52:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:30 Get A/D filter: -9.255963e+061 result=40 06:52:30 Get A/D value=-858993460 result=40 06:52:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:30 Parameters OK 06:52:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:30 Set A/D data flow result=40 06:52:30 Set A/D channel type result=40 06:52:30 Set A/D encoding result=40 06:52:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:30 Set channel filter=0.000000e+000 result=40 06:52:30 Config A/D Result=40 06:52:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:30 Get A/D filter: -9.255963e+061 result=40 06:52:30 Get A/D value=-858993460 result=40 06:52:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:30 Aux= 06:52:30 Message to Camera, serial 79548 queued 06:53:07 Received message from Master: op=PointingHead serial=79561 06:53:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:53:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:53:07 Point started: ret=0 06:53:07 point_skyscan result=0 06:53:08 Check angles 06:53:08 SkyScan query 06:53:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:53:08 Message to Master queued w/err=0: serial=79561 error=0 06:53:13 Received message from Master: op=Filter serial=79562 06:53:13 Color wheel filter change from 0 to 0 06:53:13 FLIGetFilterPos err=0 currentPosition=0 06:53:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:13 Filter is already there-color wheel unchanged 06:53:14 Received message from Master: op=Shutter serial=79563 06:53:14 Shutter LASER close 06:53:14 Received message from Camera: op=State serial=79565 06:53:14 GetSingleValue result=40 Value=cccccccc 06:53:14 SkyScan query 06:53:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:14 Parameters OK 06:53:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:14 Set A/D data flow result=40 06:53:14 Set A/D channel type result=40 06:53:14 Set A/D encoding result=40 06:53:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:14 Set channel filter=0.000000e+000 result=40 06:53:14 Config A/D Result=40 06:53:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:14 Get A/D filter: -9.255963e+061 result=40 06:53:14 Get A/D value=-858993460 result=40 06:53:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:14 Parameters OK 06:53:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:14 Set A/D data flow result=40 06:53:14 Set A/D channel type result=40 06:53:14 Set A/D encoding result=40 06:53:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:14 Set channel filter=0.000000e+000 result=40 06:53:14 Config A/D Result=40 06:53:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:14 Get A/D filter: -9.255963e+061 result=40 06:53:14 Get A/D value=-858993460 result=40 06:53:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:14 Aux= 06:53:14 Message to Camera, serial 79565 queued 06:53:51 Received message from Master: op=PointingHead serial=79578 06:53:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:53:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:53:51 Point started: ret=0 06:53:51 point_skyscan result=0 06:53:52 Check angles 06:53:52 SkyScan query 06:53:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:53:53 Message to Master queued w/err=0: serial=79578 error=0 06:53:58 Received message from Master: op=Filter serial=79579 06:53:58 Color wheel filter change from 0 to 0 06:53:58 FLIGetFilterPos err=0 currentPosition=0 06:53:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:58 Filter is already there-color wheel unchanged 06:53:58 Received message from Master: op=Shutter serial=79580 06:53:58 Shutter LASER close 06:53:58 Received message from Camera: op=State serial=79582 06:53:58 GetSingleValue result=40 Value=cccccccc 06:53:58 SkyScan query 06:53:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:59 Parameters OK 06:53:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:59 Set A/D data flow result=40 06:53:59 Set A/D channel type result=40 06:53:59 Set A/D encoding result=40 06:53:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:59 Set channel filter=0.000000e+000 result=40 06:53:59 Config A/D Result=40 06:53:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:59 Get A/D filter: -9.255963e+061 result=40 06:53:59 Get A/D value=-858993460 result=40 06:53:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:59 Parameters OK 06:53:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:59 Set A/D data flow result=40 06:53:59 Set A/D channel type result=40 06:53:59 Set A/D encoding result=40 06:53:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:59 Set channel filter=0.000000e+000 result=40 06:53:59 Config A/D Result=40 06:53:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:59 Get A/D filter: -9.255963e+061 result=40 06:53:59 Get A/D value=-858993460 result=40 06:53:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:59 Aux= 06:53:59 Message to Camera, serial 79582 queued 06:54:35 Received message from Master: op=PointingHead serial=79595 06:54:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:54:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:54:36 Point started: ret=0 06:54:36 point_skyscan result=0 06:54:36 Check angles 06:54:36 SkyScan query 06:54:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 06:54:37 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 06:54:37 Check angles 06:54:37 SkyScan query 06:54:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 [UTC 2019-3-3 06:54:38] 06:54:38 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 06:54:38 Check angles 06:54:38 SkyScan query 06:54:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 06:54:39 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 06:54:39 Check angles 06:54:39 SkyScan query 06:54:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 06:54:39 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 06:54:39 Check angles 06:54:39 SkyScan query 06:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.475<-19165 Statuses=0008 0009 06:54:40 Msec=3000 True Az=112.995 Ze=-107.475 Az status=0008 Ze status=0009 06:54:40 Check angles 06:54:40 SkyScan query 06:54:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.415<-20561 Statuses=0008 0009 06:54:41 Msec=3750 True Az=112.995 Ze=-128.415 Az status=0008 Ze status=0009 06:54:41 Check angles 06:54:41 SkyScan query 06:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.385<-21959 Statuses=0008 0009 06:54:42 Msec=4500 True Az=112.995 Ze=-149.385 Az status=0008 Ze status=0009 06:54:42 Check angles 06:54:42 SkyScan query 06:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.325<-23355 Statuses=0008 0009 06:54:42 Msec=5250 True Az=112.995 Ze=-170.325 Az status=0008 Ze status=0009 06:54:42 Check angles 06:54:42 SkyScan query 06:54:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:54:43 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:54:43 Message to Master queued w/err=0: serial=79595 error=0 06:54:48 Received message from Master: op=Filter serial=79596 06:54:48 Color wheel filter change from 0 to 0 06:54:48 FLIGetFilterPos err=0 currentPosition=0 06:54:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:48 Filter is already there-color wheel unchanged 06:54:48 Received message from Master: op=Shutter serial=79597 06:54:48 Shutter LASER open 06:54:48 Received message from Camera: op=State serial=79599 06:54:48 GetSingleValue result=40 Value=cccccccc 06:54:48 SkyScan query 06:54:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:54:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:49 Parameters OK 06:54:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:49 Set A/D data flow result=40 06:54:49 Set A/D channel type result=40 06:54:49 Set A/D encoding result=40 06:54:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:49 Set channel filter=0.000000e+000 result=40 06:54:49 Config A/D Result=40 06:54:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:49 Get A/D filter: -9.255963e+061 result=40 06:54:49 Get A/D value=-858993460 result=40 06:54:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:49 Parameters OK 06:54:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:49 Set A/D data flow result=40 06:54:49 Set A/D channel type result=40 06:54:49 Set A/D encoding result=40 06:54:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:49 Set channel filter=0.000000e+000 result=40 06:54:49 Config A/D Result=40 06:54:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:49 Get A/D filter: -9.255963e+061 result=40 06:54:49 Get A/D value=-858993460 result=40 06:54:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:49 Aux= 06:54:49 Message to Camera, serial 79599 queued 06:54:57 Received message from Master: op=Shutter serial=79609 06:54:57 Shutter LASER close 06:54:58 Received message from Master: op=PointingHead serial=79613 06:54:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:54:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:54:58 Point started: ret=0 06:54:58 point_skyscan result=0 06:54:59 Check angles 06:54:59 SkyScan query 06:55:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 06:55:00 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 06:55:00 Check angles 06:55:00 SkyScan query 06:55:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.475<-20165 Statuses=0008 0009 06:55:00 Msec=750 True Az=112.995 Ze=-122.475 Az status=0008 Ze status=0009 06:55:01 Check angles 06:55:01 SkyScan query 06:55:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.505<-18767 Statuses=0008 0009 06:55:01 Msec=1500 True Az=112.995 Ze=-101.505 Az status=0008 Ze status=0009 06:55:01 Check angles 06:55:01 SkyScan query 06:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.535<-17369 Statuses=0008 0009 06:55:02 Msec=2250 True Az=112.995 Ze=-80.535 Az status=0008 Ze status=0009 06:55:02 Check angles 06:55:02 SkyScan query 06:55:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 06:55:03 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 06:55:03 Check angles 06:55:03 SkyScan query 06:55:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 06:55:03 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 06:55:04 Check angles 06:55:04 SkyScan query 06:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 06:55:04 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 06:55:04 Check angles 06:55:04 SkyScan query 06:55:05 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 06:55:05 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 06:55:05 Check angles 06:55:05 SkyScan query 06:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:55:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:55:06 Message to Master queued w/err=0: serial=79613 error=0 06:55:11 Received message from Master: op=Filter serial=79614 06:55:11 Color wheel filter change from 0 to 0 06:55:11 FLIGetFilterPos err=0 currentPosition=0 06:55:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:11 Filter is already there-color wheel unchanged 06:55:11 Received message from Master: op=Shutter serial=79615 06:55:11 Shutter LASER close 06:55:11 Received message from Camera: op=State serial=79617 06:55:11 GetSingleValue result=40 Value=cccccccc 06:55:11 SkyScan query 06:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:55:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:12 Parameters OK 06:55:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:12 Set A/D data flow result=40 06:55:12 Set A/D channel type result=40 06:55:12 Set A/D encoding result=40 06:55:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:12 Set channel filter=0.000000e+000 result=40 06:55:12 Config A/D Result=40 06:55:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:12 Get A/D filter: -9.255963e+061 result=40 06:55:12 Get A/D value=-858993460 result=40 06:55:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:12 Parameters OK 06:55:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:12 Set A/D data flow result=40 06:55:12 Set A/D channel type result=40 06:55:12 Set A/D encoding result=40 06:55:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:12 Set channel filter=0.000000e+000 result=40 06:55:12 Config A/D Result=40 06:55:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:12 Get A/D filter: -9.255963e+061 result=40 06:55:12 Get A/D value=-858993460 result=40 06:55:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:12 Aux= 06:55:12 Message to Camera, serial 79617 queued 06:55:48 Received message from Master: op=PointingHead serial=79630 06:55:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:55:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:55:49 Point started: ret=0 06:55:49 point_skyscan result=0 06:55:50 Check angles 06:55:50 SkyScan query 06:55:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:55:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:55:50 Message to Master queued w/err=0: serial=79630 error=0 06:55:55 Received message from Master: op=Filter serial=79631 06:55:55 Color wheel filter change from 0 to 0 06:55:55 FLIGetFilterPos err=0 currentPosition=0 06:55:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:55 Filter is already there-color wheel unchanged 06:55:55 Received message from Master: op=Shutter serial=79632 06:55:55 Shutter LASER close 06:55:55 Received message from Camera: op=State serial=79634 06:55:55 GetSingleValue result=40 Value=cccccccc 06:55:55 SkyScan query 06:55:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:55:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:56 Parameters OK 06:55:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:56 Set A/D data flow result=40 06:55:56 Set A/D channel type result=40 06:55:56 Set A/D encoding result=40 06:55:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:56 Set channel filter=0.000000e+000 result=40 06:55:56 Config A/D Result=40 06:55:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:56 Get A/D filter: -9.255963e+061 result=40 06:55:56 Get A/D value=-858993460 result=40 06:55:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:56 Parameters OK 06:55:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:56 Set A/D data flow result=40 06:55:56 Set A/D channel type result=40 06:55:56 Set A/D encoding result=40 06:55:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:56 Set channel filter=0.000000e+000 result=40 06:55:56 Config A/D Result=40 06:55:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:56 Get A/D filter: -9.255963e+061 result=40 06:55:56 Get A/D value=-858993460 result=40 06:55:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:56 Aux= 06:55:56 Message to Camera, serial 79634 queued 06:56:33 Received message from Master: op=PointingHead serial=79647 06:56:33 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:56:33 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:56:33 Point started: ret=0 06:56:33 point_skyscan result=0 06:56:34 Check angles 06:56:34 SkyScan query 06:56:34 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 06:56:34 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 06:56:35 Check angles 06:56:35 SkyScan query 06:56:35 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.495<-12433 Statuses=0009 0008 06:56:35 Msec=750 True Az=153.6 Ze=-6.495 Az status=0009 Ze status=0008 06:56:35 Check angles 06:56:35 SkyScan query 06:56:36 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 06:56:36 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 06:56:36 Check angles 06:56:36 SkyScan query 06:56:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:56:37 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:56:37 Message to Master queued w/err=0: serial=79647 error=0 06:56:42 Received message from Master: op=Filter serial=79648 06:56:42 Color wheel filter change from 0 to 0 06:56:42 FLIGetFilterPos err=0 currentPosition=0 06:56:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:42 Filter is already there-color wheel unchanged 06:56:42 Received message from Master: op=Shutter serial=79649 06:56:42 Shutter LASER close 06:56:42 Received message from Camera: op=State serial=79651 06:56:42 GetSingleValue result=40 Value=cccccccc 06:56:42 SkyScan query 06:56:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:56:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:42 Parameters OK 06:56:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:42 Set A/D data flow result=40 06:56:42 Set A/D channel type result=40 06:56:42 Set A/D encoding result=40 06:56:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:42 Set channel filter=0.000000e+000 result=40 06:56:42 Config A/D Result=40 06:56:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:42 Get A/D filter: -9.255963e+061 result=40 06:56:42 Get A/D value=-858993460 result=40 06:56:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:42 Parameters OK 06:56:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:42 Set A/D data flow result=40 06:56:42 Set A/D channel type result=40 06:56:42 Set A/D encoding result=40 06:56:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:42 Set channel filter=0.000000e+000 result=40 06:56:42 Config A/D Result=40 06:56:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:42 Get A/D filter: -9.255963e+061 result=40 06:56:42 Get A/D value=-858993460 result=40 06:56:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:42 Aux= 06:56:42 Message to Camera, serial 79651 queued 06:57:19 Received message from Master: op=PointingHead serial=79664 06:57:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:57:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:57:20 Point started: ret=0 06:57:20 point_skyscan result=0 06:57:20 Check angles 06:57:20 SkyScan query 06:57:21 SkyScan query done: ret=0 az=152.445<-10163 ze=6.51<-11566 Statuses=0009 0008 06:57:21 Msec=0 True Az=152.445 Ze=6.51 Az status=0009 Ze status=0008 06:57:21 Check angles 06:57:21 SkyScan query 06:57:22 SkyScan query done: ret=0 az=135<-9000 ze=6.495<-11567 Statuses=0009 0008 06:57:22 Msec=750 True Az=135 Ze=6.495 Az status=0009 Ze status=0008 06:57:22 Check angles 06:57:22 SkyScan query 06:57:22 SkyScan query done: ret=0 az=117.555<-7837 ze=6.495<-11567 Statuses=0009 0008 06:57:22 Msec=1500 True Az=117.555 Ze=6.495 Az status=0009 Ze status=0008 06:57:23 Check angles 06:57:23 SkyScan query 06:57:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:57:23 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:57:23 Message to Master queued w/err=0: serial=79664 error=0 06:57:28 Received message from Master: op=Filter serial=79665 06:57:28 Color wheel filter change from 0 to 0 06:57:28 FLIGetFilterPos err=0 currentPosition=0 06:57:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:28 Filter is already there-color wheel unchanged 06:57:28 Received message from Master: op=Shutter serial=79666 06:57:28 Shutter LASER close 06:57:28 Received message from Camera: op=State serial=79668 06:57:28 GetSingleValue result=40 Value=cccccccc 06:57:28 SkyScan query 06:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:57:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:29 Parameters OK 06:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:29 Set A/D data flow result=40 06:57:29 Set A/D channel type result=40 06:57:29 Set A/D encoding result=40 06:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:29 Set channel filter=0.000000e+000 result=40 06:57:29 Config A/D Result=40 06:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:29 Get A/D filter: -9.255963e+061 result=40 06:57:29 Get A/D value=-858993460 result=40 06:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:29 Parameters OK 06:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:29 Set A/D data flow result=40 06:57:29 Set A/D channel type result=40 06:57:29 Set A/D encoding result=40 06:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:29 Set channel filter=0.000000e+000 result=40 06:57:29 Config A/D Result=40 06:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:29 Get A/D filter: -9.255963e+061 result=40 06:57:29 Get A/D value=-858993460 result=40 06:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:29 Aux= 06:57:29 Message to Camera, serial 79668 queued 06:58:06 Received message from Master: op=PointingHead serial=79681 06:58:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:58:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:58:06 Point started: ret=0 06:58:06 point_skyscan result=0 06:58:07 Check angles 06:58:07 SkyScan query 06:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.865<-13591 Statuses=0008 0009 06:58:08 Msec=0 True Az=112.995 Ze=-23.865 Az status=0008 Ze status=0009 06:58:08 Check angles 06:58:08 SkyScan query 06:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.805<-14987 Statuses=0008 0009 06:58:08 Msec=750 True Az=112.995 Ze=-44.805 Az status=0008 Ze status=0009 06:58:09 Check angles 06:58:09 SkyScan query 06:58:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.165<-16411 Statuses=0008 0009 06:58:09 Msec=1500 True Az=112.995 Ze=-66.165 Az status=0008 Ze status=0009 06:58:09 Check angles 06:58:09 SkyScan query 06:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.12<-17808 Statuses=0008 0009 06:58:10 Msec=2250 True Az=112.995 Ze=-87.12 Az status=0008 Ze status=0009 06:58:10 Check angles 06:58:10 SkyScan query 06:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 06:58:11 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 06:58:11 Check angles 06:58:11 SkyScan query 06:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.48<-20632 Statuses=0008 0009 06:58:11 Msec=3750 True Az=112.995 Ze=-129.48 Az status=0008 Ze status=0009 06:58:12 Check angles 06:58:12 SkyScan query 06:58:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.435<-22029 Statuses=0008 0009 06:58:12 Msec=4500 True Az=112.995 Ze=-150.435 Az status=0008 Ze status=0009 06:58:12 Check angles 06:58:12 SkyScan query 06:58:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 06:58:13 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 06:58:13 Check angles 06:58:13 SkyScan query 06:58:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:58:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:58:14 Message to Master queued w/err=0: serial=79681 error=0 06:58:19 Received message from Master: op=Filter serial=79682 06:58:19 Color wheel filter change from 0 to 0 06:58:19 FLIGetFilterPos err=0 currentPosition=0 06:58:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:19 Filter is already there-color wheel unchanged 06:58:19 Received message from Master: op=Shutter serial=79683 06:58:19 Shutter LASER open 06:58:19 Received message from Camera: op=State serial=79685 06:58:19 GetSingleValue result=40 Value=cccccccc 06:58:19 SkyScan query 06:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:58:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:20 Parameters OK 06:58:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:20 Set A/D data flow result=40 06:58:20 Set A/D channel type result=40 06:58:20 Set A/D encoding result=40 06:58:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:20 Set channel filter=0.000000e+000 result=40 06:58:20 Config A/D Result=40 06:58:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:20 Get A/D filter: -9.255963e+061 result=40 06:58:20 Get A/D value=-858993460 result=40 06:58:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:20 Parameters OK 06:58:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:20 Set A/D data flow result=40 06:58:20 Set A/D channel type result=40 06:58:20 Set A/D encoding result=40 06:58:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:20 Set channel filter=0.000000e+000 result=40 06:58:20 Config A/D Result=40 06:58:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:20 Get A/D filter: -9.255963e+061 result=40 06:58:20 Get A/D value=-858993460 result=40 06:58:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:20 Aux= 06:58:20 Message to Camera, serial 79685 queued 06:58:27 Received message from Master: op=Shutter serial=79694 06:58:27 Shutter LASER close 06:58:28 Received message from Master: op=PointingHead serial=79698 06:58:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:58:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:58:28 Point started: ret=0 06:58:28 point_skyscan result=0 06:58:29 Check angles 06:58:29 SkyScan query 06:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 06:58:29 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 06:58:29 Check angles 06:58:29 SkyScan query 06:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 06:58:30 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 06:58:30 Check angles 06:58:30 SkyScan query 06:58:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.25<-18750 Statuses=0008 0009 06:58:31 Msec=1500 True Az=112.995 Ze=-101.25 Az status=0008 Ze status=0009 06:58:31 Check angles 06:58:31 SkyScan query 06:58:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 06:58:31 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 06:58:32 Check angles 06:58:32 SkyScan query 06:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.34<-15956 Statuses=0008 0009 06:58:32 Msec=3000 True Az=112.995 Ze=-59.34 Az status=0008 Ze status=0009 06:58:32 Check angles 06:58:32 SkyScan query 06:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.355<-14557 Statuses=0008 0009 06:58:33 Msec=3750 True Az=112.995 Ze=-38.355 Az status=0008 Ze status=0009 06:58:33 Check angles 06:58:33 SkyScan query 06:58:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.415<-13161 Statuses=0008 0009 06:58:34 Msec=4500 True Az=112.995 Ze=-17.415 Az status=0008 Ze status=0009 06:58:34 Check angles 06:58:34 SkyScan query 06:58:34 SkyScan query done: ret=0 az=112.995<-7533 ze=3.54<-11764 Statuses=0008 0009 06:58:34 Msec=5250 True Az=112.995 Ze=3.54 Az status=0008 Ze status=0009 06:58:35 Check angles 06:58:35 SkyScan query 06:58:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:58:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:58:35 Message to Master queued w/err=0: serial=79698 error=0 06:58:40 Received message from Master: op=Filter serial=79699 06:58:40 Color wheel filter change from 0 to 0 06:58:40 FLIGetFilterPos err=0 currentPosition=0 06:58:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:40 Filter is already there-color wheel unchanged 06:58:40 Received message from Master: op=Shutter serial=79700 06:58:40 Shutter LASER close 06:58:41 Received message from Camera: op=State serial=79702 06:58:41 GetSingleValue result=40 Value=cccccccc 06:58:41 SkyScan query 06:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:58:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:41 Parameters OK 06:58:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:41 Set A/D data flow result=40 06:58:41 Set A/D channel type result=40 06:58:41 Set A/D encoding result=40 06:58:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:41 Set channel filter=0.000000e+000 result=40 06:58:41 Config A/D Result=40 06:58:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:41 Get A/D filter: -9.255963e+061 result=40 06:58:41 Get A/D value=-858993460 result=40 06:58:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:41 Parameters OK 06:58:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:41 Set A/D data flow result=40 06:58:41 Set A/D channel type result=40 06:58:41 Set A/D encoding result=40 06:58:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:41 Set channel filter=0.000000e+000 result=40 06:58:41 Config A/D Result=40 06:58:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:41 Get A/D filter: -9.255963e+061 result=40 06:58:41 Get A/D value=-858993460 result=40 06:58:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:41 Aux= 06:58:41 Message to Camera, serial 79702 queued 06:59:18 Received message from Master: op=PointingHead serial=79715 06:59:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:59:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:59:18 Point started: ret=0 06:59:18 point_skyscan result=0 06:59:19 Check angles 06:59:19 SkyScan query 06:59:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:59:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:59:20 Message to Master queued w/err=0: serial=79715 error=0 06:59:25 Received message from Master: op=Filter serial=79716 06:59:25 Color wheel filter change from 0 to 0 06:59:25 FLIGetFilterPos err=0 currentPosition=0 06:59:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:25 Filter is already there-color wheel unchanged 06:59:25 Received message from Master: op=Shutter serial=79717 06:59:25 Shutter LASER close 06:59:25 Received message from Camera: op=State serial=79719 06:59:25 GetSingleValue result=40 Value=cccccccc 06:59:25 SkyScan query 06:59:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:59:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:25 Parameters OK 06:59:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:25 Set A/D data flow result=40 06:59:25 Set A/D channel type result=40 06:59:25 Set A/D encoding result=40 06:59:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:25 Set channel filter=0.000000e+000 result=40 06:59:25 Config A/D Result=40 06:59:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:25 Get A/D filter: -9.255963e+061 result=40 06:59:25 Get A/D value=-858993460 result=40 06:59:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:25 Parameters OK 06:59:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:25 Set A/D data flow result=40 06:59:25 Set A/D channel type result=40 06:59:25 Set A/D encoding result=40 06:59:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:25 Set channel filter=0.000000e+000 result=40 06:59:25 Config A/D Result=40 06:59:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:25 Get A/D filter: -9.255963e+061 result=40 06:59:25 Get A/D value=-858993460 result=40 06:59:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:25 Aux= 06:59:25 Message to Camera, serial 79719 queued 07:00:02 Received message from Master: op=PointingHead serial=79732 07:00:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:00:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:00:03 Point started: ret=0 07:00:03 point_skyscan result=0 07:00:03 Check angles 07:00:03 SkyScan query 07:00:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:00:04 Message to Master queued w/err=0: serial=79732 error=0 07:00:09 Received message from Master: op=Filter serial=79733 07:00:09 Color wheel filter change from 0 to 0 07:00:09 FLIGetFilterPos err=0 currentPosition=0 07:00:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:09 Filter is already there-color wheel unchanged 07:00:09 Received message from Master: op=Shutter serial=79734 07:00:09 Shutter LASER close 07:00:09 Received message from Camera: op=State serial=79736 07:00:09 GetSingleValue result=40 Value=cccccccc 07:00:09 SkyScan query 07:00:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:10 Parameters OK 07:00:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:10 Set A/D data flow result=40 07:00:10 Set A/D channel type result=40 07:00:10 Set A/D encoding result=40 07:00:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:10 Set channel filter=0.000000e+000 result=40 07:00:10 Config A/D Result=40 07:00:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:10 Get A/D filter: -9.255963e+061 result=40 07:00:10 Get A/D value=-858993460 result=40 07:00:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:10 Parameters OK 07:00:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:10 Set A/D data flow result=40 07:00:10 Set A/D channel type result=40 07:00:10 Set A/D encoding result=40 07:00:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:10 Set channel filter=0.000000e+000 result=40 07:00:10 Config A/D Result=40 07:00:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:10 Get A/D filter: -9.255963e+061 result=40 07:00:10 Get A/D value=-858993460 result=40 07:00:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:10 Aux= 07:00:10 Message to Camera, serial 79736 queued 07:00:46 Received message from Master: op=PointingHead serial=79749 07:00:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:00:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:00:47 Point started: ret=0 07:00:47 point_skyscan result=0 07:00:48 Check angles 07:00:48 SkyScan query 07:00:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:00:48 Message to Master queued w/err=0: serial=79749 error=0 07:00:53 Received message from Master: op=Filter serial=79750 07:00:53 Color wheel filter change from 0 to 0 07:00:53 FLIGetFilterPos err=0 currentPosition=0 07:00:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:53 Filter is already there-color wheel unchanged 07:00:53 Received message from Master: op=Shutter serial=79751 07:00:53 Shutter LASER close 07:00:53 Received message from Camera: op=State serial=79753 07:00:53 GetSingleValue result=40 Value=cccccccc 07:00:53 SkyScan query 07:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:54 Parameters OK 07:00:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:54 Set A/D data flow result=40 07:00:54 Set A/D channel type result=40 07:00:54 Set A/D encoding result=40 07:00:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:54 Set channel filter=0.000000e+000 result=40 07:00:54 Config A/D Result=40 07:00:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:54 Get A/D filter: -9.255963e+061 result=40 07:00:54 Get A/D value=-858993460 result=40 07:00:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:54 Parameters OK 07:00:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:54 Set A/D data flow result=40 07:00:54 Set A/D channel type result=40 07:00:54 Set A/D encoding result=40 07:00:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:54 Set channel filter=0.000000e+000 result=40 07:00:54 Config A/D Result=40 07:00:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:54 Get A/D filter: -9.255963e+061 result=40 07:00:54 Get A/D value=-858993460 result=40 07:00:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:54 Aux= 07:00:54 Message to Camera, serial 79753 queued 07:01:31 Received message from Master: op=PointingHead serial=79766 07:01:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:01:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:01:31 Point started: ret=0 07:01:31 point_skyscan result=0 07:01:32 Check angles 07:01:32 SkyScan query 07:01:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 07:01:32 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 07:01:33 Check angles 07:01:33 SkyScan query 07:01:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.145<-14943 Statuses=0008 0009 07:01:33 Msec=750 True Az=112.995 Ze=-44.145 Az status=0008 Ze status=0009 07:01:33 Check angles 07:01:33 SkyScan query 07:01:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.085<-16339 Statuses=0008 0009 07:01:34 Msec=1500 True Az=112.995 Ze=-65.085 Az status=0008 Ze status=0009 07:01:34 Check angles 07:01:34 SkyScan query 07:01:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.175<-17745 Statuses=0008 0009 07:01:35 Msec=2250 True Az=112.995 Ze=-86.175 Az status=0008 Ze status=0009 07:01:35 Check angles 07:01:35 SkyScan query 07:01:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.995<-19133 Statuses=0008 0009 07:01:35 Msec=3000 True Az=112.995 Ze=-106.995 Az status=0008 Ze status=0009 07:01:36 Check angles 07:01:36 SkyScan query 07:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.965<-20531 Statuses=0008 0009 07:01:36 Msec=3750 True Az=112.995 Ze=-127.965 Az status=0008 Ze status=0009 07:01:36 Check angles 07:01:36 SkyScan query 07:01:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.905<-21927 Statuses=0008 0009 07:01:37 Msec=4500 True Az=112.995 Ze=-148.905 Az status=0008 Ze status=0009 07:01:37 Check angles 07:01:37 SkyScan query 07:01:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.86<-23324 Statuses=0008 0009 07:01:38 Msec=5250 True Az=112.995 Ze=-169.86 Az status=0008 Ze status=0009 07:01:38 Check angles 07:01:38 SkyScan query 07:01:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:01:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:01:38 Message to Master queued w/err=0: serial=79766 error=0 07:01:43 Received message from Master: op=Filter serial=79767 07:01:43 Color wheel filter change from 0 to 0 07:01:43 FLIGetFilterPos err=0 currentPosition=0 07:01:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:43 Filter is already there-color wheel unchanged 07:01:44 Received message from Master: op=Shutter serial=79768 07:01:44 Shutter LASER open 07:01:44 Received message from Camera: op=State serial=79770 07:01:44 GetSingleValue result=40 Value=cccccccc 07:01:44 SkyScan query 07:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:01:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:44 Parameters OK 07:01:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:44 Set A/D data flow result=40 07:01:44 Set A/D channel type result=40 07:01:44 Set A/D encoding result=40 07:01:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:44 Set channel filter=0.000000e+000 result=40 07:01:44 Config A/D Result=40 07:01:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:44 Get A/D filter: -9.255963e+061 result=40 07:01:44 Get A/D value=-858993460 result=40 07:01:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:44 Parameters OK 07:01:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:44 Set A/D data flow result=40 07:01:44 Set A/D channel type result=40 07:01:44 Set A/D encoding result=40 07:01:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:44 Set channel filter=0.000000e+000 result=40 07:01:44 Config A/D Result=40 07:01:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:44 Get A/D filter: -9.255963e+061 result=40 07:01:44 Get A/D value=-858993460 result=40 07:01:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:44 Aux= 07:01:44 Message to Camera, serial 79770 queued 07:01:53 Received message from Master: op=Shutter serial=79780 07:01:53 Shutter LASER close 07:01:53 Received message from Master: op=PointingHead serial=79784 07:01:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:01:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:01:54 Point started: ret=0 07:01:54 point_skyscan result=0 07:01:54 Check angles 07:01:54 SkyScan query 07:01:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 07:01:55 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 07:01:55 Check angles 07:01:55 SkyScan query 07:01:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 07:01:56 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 07:01:56 Check angles 07:01:56 SkyScan query 07:01:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 07:01:57 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 07:01:57 Check angles 07:01:57 SkyScan query 07:01:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 07:01:57 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 07:01:57 Check angles 07:01:57 SkyScan query 07:01:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.995<-15933 Statuses=0008 0009 07:01:58 Msec=3000 True Az=112.995 Ze=-58.995 Az status=0008 Ze status=0009 07:01:58 Check angles 07:01:58 SkyScan query 07:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.995<-14533 Statuses=0008 0009 07:01:59 Msec=3750 True Az=112.995 Ze=-37.995 Az status=0008 Ze status=0009 07:01:59 Check angles 07:01:59 SkyScan query 07:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.07<-13138 Statuses=0008 0009 07:02:00 Msec=4500 True Az=112.995 Ze=-17.07 Az status=0008 Ze status=0009 07:02:00 Check angles 07:02:00 SkyScan query 07:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=3.9<-11740 Statuses=0008 0009 07:02:00 Msec=5250 True Az=112.995 Ze=3.9 Az status=0008 Ze status=0009 07:02:00 Check angles 07:02:00 SkyScan query 07:02:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:02:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:02:01 Message to Master queued w/err=0: serial=79784 error=0 07:02:06 Received message from Master: op=Filter serial=79785 07:02:06 Color wheel filter change from 0 to 0 07:02:06 FLIGetFilterPos err=0 currentPosition=0 07:02:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:06 Filter is already there-color wheel unchanged 07:02:06 Received message from Master: op=Shutter serial=79786 07:02:06 Shutter LASER close 07:02:06 Received message from Camera: op=State serial=79788 07:02:06 GetSingleValue result=40 Value=cccccccc 07:02:06 SkyScan query 07:02:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:02:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:07 Parameters OK 07:02:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:07 Set A/D data flow result=40 07:02:07 Set A/D channel type result=40 07:02:07 Set A/D encoding result=40 07:02:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:07 Set channel filter=0.000000e+000 result=40 07:02:07 Config A/D Result=40 07:02:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:07 Get A/D filter: -9.255963e+061 result=40 07:02:07 Get A/D value=-858993460 result=40 07:02:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:07 Parameters OK 07:02:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:07 Set A/D data flow result=40 07:02:07 Set A/D channel type result=40 07:02:07 Set A/D encoding result=40 07:02:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:07 Set channel filter=0.000000e+000 result=40 07:02:07 Config A/D Result=40 07:02:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:07 Get A/D filter: -9.255963e+061 result=40 07:02:07 Get A/D value=-858993460 result=40 07:02:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:07 Aux= 07:02:07 Message to Camera, serial 79788 queued 07:02:44 Received message from Master: op=PointingHead serial=79801 07:02:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:02:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:02:44 Point started: ret=0 07:02:44 point_skyscan result=0 07:02:45 Check angles 07:02:45 SkyScan query 07:02:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:02:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:02:46 Message to Master queued w/err=0: serial=79801 error=0 07:02:51 Received message from Master: op=Filter serial=79802 07:02:51 Color wheel filter change from 0 to 0 07:02:51 FLIGetFilterPos err=0 currentPosition=0 07:02:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:51 Filter is already there-color wheel unchanged 07:02:51 Received message from Master: op=Shutter serial=79803 07:02:51 Shutter LASER close 07:02:51 Received message from Camera: op=State serial=79805 07:02:51 GetSingleValue result=40 Value=cccccccc 07:02:51 SkyScan query 07:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:02:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:51 Parameters OK 07:02:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:51 Set A/D data flow result=40 07:02:51 Set A/D channel type result=40 07:02:51 Set A/D encoding result=40 07:02:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:51 Set channel filter=0.000000e+000 result=40 07:02:51 Config A/D Result=40 07:02:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:51 Get A/D filter: -9.255963e+061 result=40 07:02:51 Get A/D value=-858993460 result=40 07:02:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:51 Parameters OK 07:02:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:51 Set A/D data flow result=40 07:02:51 Set A/D channel type result=40 07:02:51 Set A/D encoding result=40 07:02:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:51 Set channel filter=0.000000e+000 result=40 07:02:51 Config A/D Result=40 07:02:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:51 Get A/D filter: -9.255963e+061 result=40 07:02:51 Get A/D value=-858993460 result=40 07:02:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:51 Aux= 07:02:51 Message to Camera, serial 79805 queued 07:03:28 Received message from Master: op=PointingHead serial=79818 07:03:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:03:28 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:03:29 Point started: ret=0 07:03:29 point_skyscan result=0 07:03:29 Check angles 07:03:29 SkyScan query 07:03:30 SkyScan query done: ret=0 az=135.855<-9057 ze=-6.51<-12434 Statuses=0009 0008 07:03:30 Msec=0 True Az=135.855 Ze=-6.51 Az status=0009 Ze status=0008 07:03:30 Check angles 07:03:30 SkyScan query 07:03:31 SkyScan query done: ret=0 az=153.42<-10228 ze=-6.495<-12433 Statuses=0009 0008 07:03:31 Msec=750 True Az=153.42 Ze=-6.495 Az status=0009 Ze status=0008 07:03:31 Check angles 07:03:31 SkyScan query 07:03:31 SkyScan query done: ret=0 az=170.865<-11391 ze=-6.495<-12433 Statuses=0009 0008 07:03:31 Msec=1500 True Az=170.865 Ze=-6.495 Az status=0009 Ze status=0008 07:03:32 Check angles 07:03:32 SkyScan query 07:03:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:03:32 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:03:32 Message to Master queued w/err=0: serial=79818 error=0 07:03:37 Received message from Master: op=Filter serial=79819 07:03:37 Color wheel filter change from 0 to 0 07:03:37 FLIGetFilterPos err=0 currentPosition=0 07:03:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:37 Filter is already there-color wheel unchanged 07:03:37 Received message from Master: op=Shutter serial=79820 07:03:37 Shutter LASER close 07:03:37 Received message from Camera: op=State serial=79822 07:03:37 GetSingleValue result=40 Value=cccccccc 07:03:37 SkyScan query 07:03:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:03:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:38 Parameters OK 07:03:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:38 Set A/D data flow result=40 07:03:38 Set A/D channel type result=40 07:03:38 Set A/D encoding result=40 07:03:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:38 Set channel filter=0.000000e+000 result=40 07:03:38 Config A/D Result=40 07:03:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:38 Get A/D filter: -9.255963e+061 result=40 07:03:38 Get A/D value=-858993460 result=40 07:03:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:38 Parameters OK 07:03:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:38 Set A/D data flow result=40 07:03:38 Set A/D channel type result=40 07:03:38 Set A/D encoding result=40 07:03:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:38 Set channel filter=0.000000e+000 result=40 07:03:38 Config A/D Result=40 07:03:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:38 Get A/D filter: -9.255963e+061 result=40 07:03:38 Get A/D value=-858993460 result=40 07:03:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:38 Aux= 07:03:38 Message to Camera, serial 79822 queued 07:03:38 Received message from Master: op=Identify serial=79823 [UTC 2019-3-3 07:03:50] 07:04:15 Received message from Master: op=PointingHead serial=79838 07:04:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:04:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:04:15 Point started: ret=0 07:04:15 point_skyscan result=0 07:04:16 Check angles 07:04:16 SkyScan query 07:04:16 SkyScan query done: ret=0 az=152.64<-10176 ze=6.51<-11566 Statuses=0009 0008 07:04:16 Msec=0 True Az=152.64 Ze=6.51 Az status=0009 Ze status=0008 07:04:17 Check angles 07:04:17 SkyScan query 07:04:17 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 07:04:17 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 07:04:17 Check angles 07:04:17 SkyScan query 07:04:18 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 07:04:18 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 07:04:18 Check angles 07:04:18 SkyScan query 07:04:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:04:19 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:04:19 Message to Master queued w/err=0: serial=79838 error=0 07:04:24 Received message from Master: op=Filter serial=79839 07:04:24 Color wheel filter change from 0 to 0 07:04:24 FLIGetFilterPos err=0 currentPosition=0 07:04:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:24 Filter is already there-color wheel unchanged 07:04:24 Received message from Master: op=Shutter serial=79840 07:04:24 Shutter LASER close 07:04:24 Received message from Camera: op=State serial=79842 07:04:24 GetSingleValue result=40 Value=cccccccc 07:04:24 SkyScan query 07:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:04:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:24 Parameters OK 07:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:24 Set A/D data flow result=40 07:04:24 Set A/D channel type result=40 07:04:24 Set A/D encoding result=40 07:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:24 Set channel filter=0.000000e+000 result=40 07:04:24 Config A/D Result=40 07:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:24 Get A/D filter: -9.255963e+061 result=40 07:04:24 Get A/D value=-858993460 result=40 07:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:24 Parameters OK 07:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:24 Set A/D data flow result=40 07:04:24 Set A/D channel type result=40 07:04:24 Set A/D encoding result=40 07:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:24 Set channel filter=0.000000e+000 result=40 07:04:24 Config A/D Result=40 07:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:24 Get A/D filter: -9.255963e+061 result=40 07:04:24 Get A/D value=-858993460 result=40 07:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:24 Aux= 07:04:24 Message to Camera, serial 79842 queued 07:05:01 Received message from Master: op=PointingHead serial=79855 07:05:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:05:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:05:02 Point started: ret=0 07:05:02 point_skyscan result=0 07:05:02 Check angles 07:05:02 SkyScan query 07:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 07:05:03 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 07:05:03 Check angles 07:05:03 SkyScan query 07:05:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 07:05:04 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 07:05:04 Check angles 07:05:04 SkyScan query 07:05:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 07:05:04 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 07:05:05 Check angles 07:05:05 SkyScan query 07:05:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 07:05:05 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 07:05:05 Check angles 07:05:05 SkyScan query 07:05:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.745<-19183 Statuses=0008 0009 07:05:06 Msec=3000 True Az=112.995 Ze=-107.745 Az status=0008 Ze status=0009 07:05:06 Check angles 07:05:06 SkyScan query 07:05:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 07:05:07 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 07:05:07 Check angles 07:05:07 SkyScan query 07:05:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.09<-22006 Statuses=0008 0009 07:05:08 Msec=4500 True Az=112.995 Ze=-150.09 Az status=0008 Ze status=0009 07:05:08 Check angles 07:05:08 SkyScan query 07:05:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0008 0009 07:05:08 Msec=5250 True Az=112.995 Ze=-170.925 Az status=0008 Ze status=0009 07:05:08 Check angles 07:05:08 SkyScan query 07:05:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:05:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:05:09 Message to Master queued w/err=0: serial=79855 error=0 07:05:14 Received message from Master: op=Filter serial=79856 07:05:14 Color wheel filter change from 0 to 0 07:05:14 FLIGetFilterPos err=0 currentPosition=0 07:05:14 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:14 Filter is already there-color wheel unchanged 07:05:14 Received message from Master: op=Shutter serial=79857 07:05:14 Shutter LASER open 07:05:14 Received message from Camera: op=State serial=79859 07:05:14 GetSingleValue result=40 Value=cccccccc 07:05:14 SkyScan query 07:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:05:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:15 Parameters OK 07:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:15 Set A/D data flow result=40 07:05:15 Set A/D channel type result=40 07:05:15 Set A/D encoding result=40 07:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:15 Set channel filter=0.000000e+000 result=40 07:05:15 Config A/D Result=40 07:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:15 Get A/D filter: -9.255963e+061 result=40 07:05:15 Get A/D value=-858993460 result=40 07:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:15 Parameters OK 07:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:15 Set A/D data flow result=40 07:05:15 Set A/D channel type result=40 07:05:15 Set A/D encoding result=40 07:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:15 Set channel filter=0.000000e+000 result=40 07:05:15 Config A/D Result=40 07:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:15 Get A/D filter: -9.255963e+061 result=40 07:05:15 Get A/D value=-858993460 result=40 07:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:15 Aux= 07:05:15 Message to Camera, serial 79859 queued 07:05:23 Received message from Master: op=Shutter serial=79869 07:05:23 Shutter LASER close 07:05:24 Received message from Master: op=PointingHead serial=79873 07:05:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:05:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:05:24 Point started: ret=0 07:05:24 point_skyscan result=0 07:05:25 Check angles 07:05:25 SkyScan query 07:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.875<-21525 Statuses=0008 0009 07:05:25 Msec=0 True Az=112.995 Ze=-142.875 Az status=0008 Ze status=0009 07:05:26 Check angles 07:05:26 SkyScan query 07:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 07:05:26 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 07:05:26 Check angles 07:05:26 SkyScan query 07:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 07:05:27 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 07:05:27 Check angles 07:05:27 SkyScan query 07:05:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.01<-17334 Statuses=0008 0009 07:05:28 Msec=2250 True Az=112.995 Ze=-80.01 Az status=0008 Ze status=0009 07:05:28 Check angles 07:05:28 SkyScan query 07:05:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 07:05:28 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 07:05:29 Check angles 07:05:29 SkyScan query 07:05:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.1<-14540 Statuses=0008 0009 07:05:29 Msec=3750 True Az=112.995 Ze=-38.1 Az status=0008 Ze status=0009 07:05:29 Check angles 07:05:29 SkyScan query 07:05:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.145<-13143 Statuses=0008 0009 07:05:30 Msec=4500 True Az=112.995 Ze=-17.145 Az status=0008 Ze status=0009 07:05:30 Check angles 07:05:30 SkyScan query 07:05:31 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 07:05:31 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 07:05:31 Check angles 07:05:31 SkyScan query 07:05:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:05:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:05:31 Message to Master queued w/err=0: serial=79873 error=0 07:05:36 Received message from Master: op=Filter serial=79874 07:05:36 Color wheel filter change from 0 to 0 07:05:36 FLIGetFilterPos err=0 currentPosition=0 07:05:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:36 Filter is already there-color wheel unchanged 07:05:37 Received message from Master: op=Shutter serial=79875 07:05:37 Shutter LASER close 07:05:37 Received message from Camera: op=State serial=79877 07:05:37 GetSingleValue result=40 Value=cccccccc 07:05:37 SkyScan query 07:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:05:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:37 Parameters OK 07:05:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:37 Set A/D data flow result=40 07:05:37 Set A/D channel type result=40 07:05:37 Set A/D encoding result=40 07:05:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:37 Set channel filter=0.000000e+000 result=40 07:05:37 Config A/D Result=40 07:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:37 Get A/D filter: -9.255963e+061 result=40 07:05:37 Get A/D value=-858993460 result=40 07:05:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:37 Parameters OK 07:05:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:37 Set A/D data flow result=40 07:05:37 Set A/D channel type result=40 07:05:37 Set A/D encoding result=40 07:05:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:37 Set channel filter=0.000000e+000 result=40 07:05:37 Config A/D Result=40 07:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:37 Get A/D filter: -9.255963e+061 result=40 07:05:37 Get A/D value=-858993460 result=40 07:05:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:37 Aux= 07:05:37 Message to Camera, serial 79877 queued 07:06:14 Received message from Master: op=PointingHead serial=79890 07:06:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:06:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:06:15 Point started: ret=0 07:06:15 point_skyscan result=0 07:06:15 Check angles 07:06:15 SkyScan query 07:06:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:06:16 Message to Master queued w/err=0: serial=79890 error=0 07:06:21 Received message from Master: op=Filter serial=79891 07:06:21 Color wheel filter change from 0 to 0 07:06:21 FLIGetFilterPos err=0 currentPosition=0 07:06:21 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:21 Filter is already there-color wheel unchanged 07:06:21 Received message from Master: op=Shutter serial=79892 07:06:21 Shutter LASER close 07:06:21 Received message from Camera: op=State serial=79894 07:06:21 GetSingleValue result=40 Value=cccccccc 07:06:21 SkyScan query 07:06:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:22 Parameters OK 07:06:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:22 Set A/D data flow result=40 07:06:22 Set A/D channel type result=40 07:06:22 Set A/D encoding result=40 07:06:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:22 Set channel filter=0.000000e+000 result=40 07:06:22 Config A/D Result=40 07:06:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:22 Get A/D filter: -9.255963e+061 result=40 07:06:22 Get A/D value=-858993460 result=40 07:06:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:22 Parameters OK 07:06:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:22 Set A/D data flow result=40 07:06:22 Set A/D channel type result=40 07:06:22 Set A/D encoding result=40 07:06:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:22 Set channel filter=0.000000e+000 result=40 07:06:22 Config A/D Result=40 07:06:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:22 Get A/D filter: -9.255963e+061 result=40 07:06:22 Get A/D value=-858993460 result=40 07:06:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:22 Aux= 07:06:22 Message to Camera, serial 79894 queued 07:06:59 Received message from Master: op=PointingHead serial=79907 07:06:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:06:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:06:59 Point started: ret=0 07:06:59 point_skyscan result=0 07:07:00 Check angles 07:07:00 SkyScan query 07:07:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:07:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:07:00 Message to Master queued w/err=0: serial=79907 error=0 07:07:05 Received message from Master: op=Filter serial=79908 07:07:05 Color wheel filter change from 0 to 0 07:07:05 FLIGetFilterPos err=0 currentPosition=0 07:07:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:05 Filter is already there-color wheel unchanged 07:07:05 Received message from Master: op=Shutter serial=79909 07:07:05 Shutter LASER close 07:07:05 Received message from Camera: op=State serial=79911 07:07:05 GetSingleValue result=40 Value=cccccccc 07:07:05 SkyScan query 07:07:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:07:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:06 Parameters OK 07:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:06 Set A/D data flow result=40 07:07:06 Set A/D channel type result=40 07:07:06 Set A/D encoding result=40 07:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:06 Set channel filter=0.000000e+000 result=40 07:07:06 Config A/D Result=40 07:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:06 Get A/D filter: -9.255963e+061 result=40 07:07:06 Get A/D value=-858993460 result=40 07:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:06 Parameters OK 07:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:06 Set A/D data flow result=40 07:07:06 Set A/D channel type result=40 07:07:06 Set A/D encoding result=40 07:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:06 Set channel filter=0.000000e+000 result=40 07:07:06 Config A/D Result=40 07:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:06 Get A/D filter: -9.255963e+061 result=40 07:07:06 Get A/D value=-858993460 result=40 07:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:06 Aux= 07:07:06 Message to Camera, serial 79911 queued 07:07:43 Received message from Master: op=PointingHead serial=79924 07:07:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:07:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:07:43 Point started: ret=0 07:07:43 point_skyscan result=0 07:07:44 Check angles 07:07:44 SkyScan query 07:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:07:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:07:45 Message to Master queued w/err=0: serial=79924 error=0 07:07:50 Received message from Master: op=Filter serial=79925 07:07:50 Color wheel filter change from 0 to 0 07:07:50 FLIGetFilterPos err=0 currentPosition=0 07:07:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:50 Filter is already there-color wheel unchanged 07:07:50 Received message from Master: op=Shutter serial=79926 07:07:50 Shutter LASER close 07:07:50 Received message from Camera: op=State serial=79928 07:07:50 GetSingleValue result=40 Value=cccccccc 07:07:50 SkyScan query 07:07:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:07:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:50 Parameters OK 07:07:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:50 Set A/D data flow result=40 07:07:50 Set A/D channel type result=40 07:07:50 Set A/D encoding result=40 07:07:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:50 Set channel filter=0.000000e+000 result=40 07:07:50 Config A/D Result=40 07:07:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:50 Get A/D filter: -9.255963e+061 result=40 07:07:50 Get A/D value=-858993460 result=40 07:07:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:50 Parameters OK 07:07:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:50 Set A/D data flow result=40 07:07:50 Set A/D channel type result=40 07:07:50 Set A/D encoding result=40 07:07:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:50 Set channel filter=0.000000e+000 result=40 07:07:50 Config A/D Result=40 07:07:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:50 Get A/D filter: -9.255963e+061 result=40 07:07:50 Get A/D value=-858993460 result=40 07:07:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:50 Aux= 07:07:50 Message to Camera, serial 79928 queued 07:08:27 Received message from Master: op=PointingHead serial=79941 07:08:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:08:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:08:28 Point started: ret=0 07:08:28 point_skyscan result=0 07:08:28 Check angles 07:08:28 SkyScan query 07:08:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 07:08:29 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 07:08:29 Check angles 07:08:29 SkyScan query 07:08:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 07:08:30 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 07:08:30 Check angles 07:08:30 SkyScan query 07:08:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 07:08:30 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 07:08:31 Check angles 07:08:31 SkyScan query 07:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 07:08:31 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 07:08:31 Check angles 07:08:31 SkyScan query 07:08:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 07:08:32 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 07:08:32 Check angles 07:08:32 SkyScan query 07:08:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 07:08:33 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 07:08:33 Check angles 07:08:33 SkyScan query 07:08:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 07:08:33 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 07:08:34 Check angles 07:08:34 SkyScan query 07:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 07:08:34 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 07:08:34 Check angles 07:08:34 SkyScan query 07:08:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:08:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:08:35 Message to Master queued w/err=0: serial=79941 error=0 07:08:40 Received message from Master: op=Filter serial=79942 07:08:40 Color wheel filter change from 0 to 0 07:08:40 FLIGetFilterPos err=0 currentPosition=0 07:08:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:40 Filter is already there-color wheel unchanged 07:08:40 Received message from Master: op=Shutter serial=79943 07:08:40 Shutter LASER open 07:08:40 Received message from Camera: op=State serial=79945 07:08:40 GetSingleValue result=40 Value=cccccccc 07:08:40 SkyScan query 07:08:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:08:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:41 Parameters OK 07:08:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:41 Set A/D data flow result=40 07:08:41 Set A/D channel type result=40 07:08:41 Set A/D encoding result=40 07:08:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:41 Set channel filter=0.000000e+000 result=40 07:08:41 Config A/D Result=40 07:08:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:41 Get A/D filter: -9.255963e+061 result=40 07:08:41 Get A/D value=-858993460 result=40 07:08:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:41 Parameters OK 07:08:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:41 Set A/D data flow result=40 07:08:41 Set A/D channel type result=40 07:08:41 Set A/D encoding result=40 07:08:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:41 Set channel filter=0.000000e+000 result=40 07:08:41 Config A/D Result=40 07:08:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:41 Get A/D filter: -9.255963e+061 result=40 07:08:41 Get A/D value=-858993460 result=40 07:08:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:41 Aux= 07:08:41 Message to Camera, serial 79945 queued 07:08:49 Received message from Master: op=Shutter serial=79955 07:08:49 Shutter LASER close 07:08:50 Received message from Master: op=PointingHead serial=79959 07:08:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:08:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:08:50 Point started: ret=0 07:08:50 point_skyscan result=0 07:08:51 Check angles 07:08:51 SkyScan query 07:08:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 07:08:52 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 07:08:52 Check angles 07:08:52 SkyScan query 07:08:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.92<-20128 Statuses=0008 0009 07:08:52 Msec=750 True Az=112.995 Ze=-121.92 Az status=0008 Ze status=0009 07:08:52 Check angles 07:08:52 SkyScan query 07:08:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.995<-18733 Statuses=0008 0009 07:08:53 Msec=1500 True Az=112.995 Ze=-100.995 Az status=0008 Ze status=0009 07:08:53 Check angles 07:08:53 SkyScan query 07:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 07:08:54 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 07:08:54 Check angles 07:08:54 SkyScan query 07:08:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 07:08:55 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 07:08:55 Check angles 07:08:55 SkyScan query 07:08:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.115<-14541 Statuses=0008 0009 07:08:55 Msec=3750 True Az=112.995 Ze=-38.115 Az status=0008 Ze status=0009 07:08:55 Check angles 07:08:55 SkyScan query 07:08:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.16<-13144 Statuses=0008 0009 07:08:56 Msec=4500 True Az=112.995 Ze=-17.16 Az status=0008 Ze status=0009 07:08:56 Check angles 07:08:56 SkyScan query 07:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=3.795<-11747 Statuses=0008 0009 07:08:57 Msec=5250 True Az=112.995 Ze=3.795 Az status=0008 Ze status=0009 07:08:57 Check angles 07:08:57 SkyScan query 07:08:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:08:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:08:58 Message to Master queued w/err=0: serial=79959 error=0 07:09:03 Received message from Master: op=Filter serial=79960 07:09:03 Color wheel filter change from 0 to 0 07:09:03 FLIGetFilterPos err=0 currentPosition=0 07:09:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:03 Filter is already there-color wheel unchanged 07:09:03 Received message from Master: op=Shutter serial=79961 07:09:03 Shutter LASER close 07:09:03 Received message from Camera: op=State serial=79963 07:09:03 GetSingleValue result=40 Value=cccccccc 07:09:03 SkyScan query 07:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:09:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:03 Parameters OK 07:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:03 Set A/D data flow result=40 07:09:03 Set A/D channel type result=40 07:09:03 Set A/D encoding result=40 07:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:03 Set channel filter=0.000000e+000 result=40 07:09:03 Config A/D Result=40 07:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:03 Get A/D filter: -9.255963e+061 result=40 07:09:03 Get A/D value=-858993460 result=40 07:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:03 Parameters OK 07:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:03 Set A/D data flow result=40 07:09:03 Set A/D channel type result=40 07:09:03 Set A/D encoding result=40 07:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:03 Set channel filter=0.000000e+000 result=40 07:09:03 Config A/D Result=40 07:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:03 Get A/D filter: -9.255963e+061 result=40 07:09:03 Get A/D value=-858993460 result=40 07:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:03 Aux= 07:09:03 Message to Camera, serial 79963 queued 07:09:40 Received message from Master: op=PointingHead serial=79976 07:09:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:09:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:09:41 Point started: ret=0 07:09:41 point_skyscan result=0 07:09:41 Check angles 07:09:41 SkyScan query 07:09:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:09:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:09:42 Message to Master queued w/err=0: serial=79976 error=0 07:09:47 Received message from Master: op=Filter serial=79977 07:09:47 Color wheel filter change from 0 to 0 07:09:47 FLIGetFilterPos err=0 currentPosition=0 07:09:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:47 Filter is already there-color wheel unchanged 07:09:47 Received message from Master: op=Shutter serial=79978 07:09:47 Shutter LASER close 07:09:47 Received message from Camera: op=State serial=79980 07:09:47 GetSingleValue result=40 Value=cccccccc 07:09:47 SkyScan query 07:09:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:09:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:48 Parameters OK 07:09:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:48 Set A/D data flow result=40 07:09:48 Set A/D channel type result=40 07:09:48 Set A/D encoding result=40 07:09:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:48 Set channel filter=0.000000e+000 result=40 07:09:48 Config A/D Result=40 07:09:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:48 Get A/D filter: -9.255963e+061 result=40 07:09:48 Get A/D value=-858993460 result=40 07:09:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:48 Parameters OK 07:09:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:48 Set A/D data flow result=40 07:09:48 Set A/D channel type result=40 07:09:48 Set A/D encoding result=40 07:09:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:48 Set channel filter=0.000000e+000 result=40 07:09:48 Config A/D Result=40 07:09:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:48 Get A/D filter: -9.255963e+061 result=40 07:09:48 Get A/D value=-858993460 result=40 07:09:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:48 Aux= 07:09:48 Message to Camera, serial 79980 queued 07:10:25 Received message from Master: op=PointingHead serial=79993 07:10:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:10:25 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:10:25 Point started: ret=0 07:10:25 point_skyscan result=0 07:10:26 Check angles 07:10:26 SkyScan query 07:10:26 SkyScan query done: ret=0 az=136.35<-9090 ze=-6.51<-12434 Statuses=0009 0008 07:10:26 Msec=0 True Az=136.35 Ze=-6.51 Az status=0009 Ze status=0008 07:10:26 Check angles 07:10:26 SkyScan query 07:10:27 SkyScan query done: ret=0 az=153.825<-10255 ze=-6.495<-12433 Statuses=0009 0008 07:10:27 Msec=750 True Az=153.825 Ze=-6.495 Az status=0009 Ze status=0008 07:10:27 Check angles 07:10:27 SkyScan query 07:10:28 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 07:10:28 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 07:10:28 Check angles 07:10:28 SkyScan query 07:10:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:10:29 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:10:29 Message to Master queued w/err=0: serial=79993 error=0 07:10:34 Received message from Master: op=Filter serial=79994 07:10:34 Color wheel filter change from 0 to 0 07:10:34 FLIGetFilterPos err=0 currentPosition=0 07:10:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:34 Filter is already there-color wheel unchanged 07:10:34 Received message from Master: op=Shutter serial=79995 07:10:34 Shutter LASER close 07:10:34 Received message from Camera: op=State serial=79997 07:10:34 GetSingleValue result=40 Value=cccccccc 07:10:34 SkyScan query 07:10:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:10:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:34 Parameters OK 07:10:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:34 Set A/D data flow result=40 07:10:34 Set A/D channel type result=40 07:10:34 Set A/D encoding result=40 07:10:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:34 Set channel filter=0.000000e+000 result=40 07:10:34 Config A/D Result=40 07:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:34 Get A/D filter: -9.255963e+061 result=40 07:10:34 Get A/D value=-858993460 result=40 07:10:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:34 Parameters OK 07:10:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:34 Set A/D data flow result=40 07:10:34 Set A/D channel type result=40 07:10:34 Set A/D encoding result=40 07:10:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:34 Set channel filter=0.000000e+000 result=40 07:10:34 Config A/D Result=40 07:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:34 Get A/D filter: -9.255963e+061 result=40 07:10:34 Get A/D value=-858993460 result=40 07:10:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:34 Aux= 07:10:34 Message to Camera, serial 79997 queued 07:11:11 Received message from Master: op=PointingHead serial=80010 07:11:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:11:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:11:12 Point started: ret=0 07:11:12 point_skyscan result=0 07:11:12 Check angles 07:11:12 SkyScan query 07:11:13 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 07:11:13 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 07:11:13 Check angles 07:11:13 SkyScan query 07:11:14 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 07:11:14 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 07:11:14 Check angles 07:11:14 SkyScan query 07:11:14 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 07:11:14 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 07:11:15 Check angles 07:11:15 SkyScan query 07:11:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:11:15 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:11:15 Message to Master queued w/err=0: serial=80010 error=0 07:11:20 Received message from Master: op=Filter serial=80011 07:11:20 Color wheel filter change from 0 to 0 07:11:20 FLIGetFilterPos err=0 currentPosition=0 07:11:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:20 Filter is already there-color wheel unchanged 07:11:20 Received message from Master: op=Shutter serial=80012 07:11:20 Shutter LASER close 07:11:20 Received message from Camera: op=State serial=80014 07:11:20 GetSingleValue result=40 Value=cccccccc 07:11:20 SkyScan query 07:11:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:11:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:21 Parameters OK 07:11:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:21 Set A/D data flow result=40 07:11:21 Set A/D channel type result=40 07:11:21 Set A/D encoding result=40 07:11:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:21 Set channel filter=0.000000e+000 result=40 07:11:21 Config A/D Result=40 07:11:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:21 Get A/D filter: -9.255963e+061 result=40 07:11:21 Get A/D value=-858993460 result=40 07:11:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:21 Parameters OK 07:11:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:21 Set A/D data flow result=40 07:11:21 Set A/D channel type result=40 07:11:21 Set A/D encoding result=40 07:11:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:21 Set channel filter=0.000000e+000 result=40 07:11:21 Config A/D Result=40 07:11:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:21 Get A/D filter: -9.255963e+061 result=40 07:11:21 Get A/D value=-858993460 result=40 07:11:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:21 Aux= 07:11:21 Message to Camera, serial 80014 queued 07:11:58 Received message from Master: op=PointingHead serial=80027 07:11:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:11:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:11:58 Point started: ret=0 07:11:58 point_skyscan result=0 07:11:59 Check angles 07:11:59 SkyScan query 07:11:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 07:11:59 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 07:12:00 Check angles 07:12:00 SkyScan query 07:12:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 07:12:00 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 07:12:00 Check angles 07:12:00 SkyScan query 07:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.28<-16352 Statuses=0008 0009 07:12:01 Msec=1500 True Az=112.995 Ze=-65.28 Az status=0008 Ze status=0009 07:12:01 Check angles 07:12:01 SkyScan query 07:12:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.25<-17750 Statuses=0008 0009 07:12:02 Msec=2250 True Az=112.995 Ze=-86.25 Az status=0008 Ze status=0009 07:12:02 Check angles 07:12:02 SkyScan query 07:12:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.19<-19146 Statuses=0008 0009 07:12:02 Msec=3000 True Az=112.995 Ze=-107.19 Az status=0008 Ze status=0009 07:12:03 Check angles 07:12:03 SkyScan query 07:12:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.55<-20570 Statuses=0008 0009 07:12:03 Msec=3750 True Az=112.995 Ze=-128.55 Az status=0008 Ze status=0009 07:12:03 Check angles 07:12:03 SkyScan query 07:12:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.52<-21968 Statuses=0008 0009 07:12:04 Msec=4500 True Az=112.995 Ze=-149.52 Az status=0008 Ze status=0009 07:12:04 Check angles 07:12:04 SkyScan query 07:12:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.46<-23364 Statuses=0008 0009 07:12:05 Msec=5250 True Az=112.995 Ze=-170.46 Az status=0008 Ze status=0009 07:12:05 Check angles 07:12:05 SkyScan query 07:12:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:12:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:12:05 Message to Master queued w/err=0: serial=80027 error=0 07:12:10 Received message from Master: op=Filter serial=80028 07:12:10 Color wheel filter change from 0 to 0 07:12:10 FLIGetFilterPos err=0 currentPosition=0 07:12:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:10 Filter is already there-color wheel unchanged 07:12:11 Received message from Master: op=Shutter serial=80029 07:12:11 Shutter LASER open 07:12:11 Received message from Camera: op=State serial=80031 07:12:11 GetSingleValue result=40 Value=cccccccc 07:12:11 SkyScan query 07:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:12:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:11 Parameters OK 07:12:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:11 Set A/D data flow result=40 07:12:11 Set A/D channel type result=40 07:12:11 Set A/D encoding result=40 07:12:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:11 Set channel filter=0.000000e+000 result=40 07:12:11 Config A/D Result=40 07:12:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:11 Get A/D filter: -9.255963e+061 result=40 07:12:11 Get A/D value=-858993460 result=40 07:12:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:11 Parameters OK 07:12:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:11 Set A/D data flow result=40 07:12:11 Set A/D channel type result=40 07:12:11 Set A/D encoding result=40 07:12:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:11 Set channel filter=0.000000e+000 result=40 07:12:11 Config A/D Result=40 07:12:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:11 Get A/D filter: -9.255963e+061 result=40 07:12:11 Get A/D value=-858993460 result=40 07:12:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:11 Aux= 07:12:11 Message to Camera, serial 80031 queued 07:12:19 Received message from Master: op=Shutter serial=80040 07:12:19 Shutter LASER close 07:12:19 Received message from Master: op=PointingHead serial=80044 07:12:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:12:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:12:20 Point started: ret=0 07:12:20 point_skyscan result=0 07:12:20 Check angles 07:12:20 SkyScan query 07:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.77<-21518 Statuses=0008 0009 07:12:21 Msec=0 True Az=112.995 Ze=-142.77 Az status=0008 Ze status=0009 07:12:21 Check angles 07:12:21 SkyScan query 07:12:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.395<-20093 Statuses=0008 0009 07:12:22 Msec=750 True Az=112.995 Ze=-121.395 Az status=0008 Ze status=0009 07:12:22 Check angles 07:12:22 SkyScan query 07:12:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-99.99<-18666 Statuses=0008 0009 07:12:23 Msec=1500 True Az=112.995 Ze=-99.99 Az status=0008 Ze status=0009 07:12:23 Check angles 07:12:23 SkyScan query 07:12:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.05<-17270 Statuses=0008 0009 07:12:23 Msec=2250 True Az=112.995 Ze=-79.05 Az status=0008 Ze status=0009 07:12:23 Check angles 07:12:23 SkyScan query 07:12:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.065<-15871 Statuses=0008 0009 07:12:24 Msec=3000 True Az=112.995 Ze=-58.065 Az status=0008 Ze status=0009 07:12:24 Check angles 07:12:24 SkyScan query 07:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.14<-14476 Statuses=0008 0009 07:12:25 Msec=3750 True Az=112.995 Ze=-37.14 Az status=0008 Ze status=0009 07:12:25 Check angles 07:12:25 SkyScan query 07:12:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.17<-13078 Statuses=0008 0009 07:12:26 Msec=4500 True Az=112.995 Ze=-16.17 Az status=0008 Ze status=0009 07:12:26 Check angles 07:12:26 SkyScan query 07:12:26 SkyScan query done: ret=0 az=112.995<-7533 ze=4.95<-11670 Statuses=0008 0009 07:12:26 Msec=5250 True Az=112.995 Ze=4.95 Az status=0008 Ze status=0009 07:12:26 Check angles 07:12:26 SkyScan query 07:12:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:12:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:12:27 Message to Master queued w/err=0: serial=80044 error=0 07:12:32 Received message from Master: op=Filter serial=80045 07:12:32 Color wheel filter change from 0 to 0 07:12:32 FLIGetFilterPos err=0 currentPosition=0 07:12:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:32 Filter is already there-color wheel unchanged 07:12:32 Received message from Master: op=Shutter serial=80046 07:12:32 Shutter LASER close 07:12:32 Received message from Camera: op=State serial=80048 07:12:32 GetSingleValue result=40 Value=cccccccc 07:12:32 SkyScan query 07:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:12:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:33 Parameters OK 07:12:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:33 Set A/D data flow result=40 07:12:33 Set A/D channel type result=40 07:12:33 Set A/D encoding result=40 07:12:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:33 Set channel filter=0.000000e+000 result=40 07:12:33 Config A/D Result=40 07:12:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:33 Get A/D filter: -9.255963e+061 result=40 07:12:33 Get A/D value=-858993460 result=40 07:12:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:33 Parameters OK 07:12:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:33 Set A/D data flow result=40 07:12:33 Set A/D channel type result=40 07:12:33 Set A/D encoding result=40 07:12:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:33 Set channel filter=0.000000e+000 result=40 07:12:33 Config A/D Result=40 07:12:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:33 Get A/D filter: -9.255963e+061 result=40 07:12:33 Get A/D value=-858993460 result=40 07:12:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:33 Aux= 07:12:33 Message to Camera, serial 80048 queued 07:13:10 Received message from Master: op=PointingHead serial=80061 07:13:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:13:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:13:10 Point started: ret=0 07:13:10 point_skyscan result=0 07:13:11 Check angles 07:13:11 SkyScan query 07:13:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:13:11 Message to Master queued w/err=0: serial=80061 error=0 07:13:16 Received message from Master: op=Filter serial=80062 07:13:16 Color wheel filter change from 0 to 0 07:13:16 FLIGetFilterPos err=0 currentPosition=0 07:13:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:16 Filter is already there-color wheel unchanged 07:13:17 Received message from Master: op=Shutter serial=80063 07:13:17 Shutter LASER close 07:13:17 Received message from Camera: op=State serial=80065 07:13:17 GetSingleValue result=40 Value=cccccccc 07:13:17 SkyScan query 07:13:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:17 Parameters OK 07:13:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:17 Set A/D data flow result=40 07:13:17 Set A/D channel type result=40 07:13:17 Set A/D encoding result=40 07:13:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:17 Set channel filter=0.000000e+000 result=40 07:13:17 Config A/D Result=40 07:13:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:17 Get A/D filter: -9.255963e+061 result=40 07:13:17 Get A/D value=-858993460 result=40 07:13:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:17 Parameters OK 07:13:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:17 Set A/D data flow result=40 07:13:17 Set A/D channel type result=40 07:13:17 Set A/D encoding result=40 07:13:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:17 Set channel filter=0.000000e+000 result=40 07:13:17 Config A/D Result=40 07:13:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:17 Get A/D filter: -9.255963e+061 result=40 07:13:17 Get A/D value=-858993460 result=40 07:13:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:17 Aux= 07:13:17 Message to Camera, serial 80065 queued 07:13:53 Received message from Master: op=PointingHead serial=80077 07:13:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:13:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:13:54 Point started: ret=0 07:13:54 point_skyscan result=0 07:13:54 Check angles 07:13:54 SkyScan query 07:13:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:13:55 Message to Master queued w/err=0: serial=80077 error=0 07:14:00 Received message from Master: op=Filter serial=80078 07:14:00 Color wheel filter change from 0 to 0 07:14:00 FLIGetFilterPos err=0 currentPosition=0 07:14:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:00 Filter is already there-color wheel unchanged 07:14:00 Received message from Master: op=Shutter serial=80079 07:14:00 Shutter LASER close 07:14:00 Received message from Camera: op=State serial=80081 07:14:00 GetSingleValue result=40 Value=cccccccc 07:14:00 SkyScan query 07:14:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:14:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:01 Parameters OK 07:14:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:01 Set A/D data flow result=40 07:14:01 Set A/D channel type result=40 07:14:01 Set A/D encoding result=40 07:14:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:01 Set channel filter=0.000000e+000 result=40 07:14:01 Config A/D Result=40 07:14:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:01 Get A/D filter: -9.255963e+061 result=40 07:14:01 Get A/D value=-858993460 result=40 07:14:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:01 Parameters OK 07:14:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:01 Set A/D data flow result=40 07:14:01 Set A/D channel type result=40 07:14:01 Set A/D encoding result=40 07:14:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:01 Set channel filter=0.000000e+000 result=40 07:14:01 Config A/D Result=40 07:14:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:01 Get A/D filter: -9.255963e+061 result=40 07:14:01 Get A/D value=-858993460 result=40 07:14:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:01 Aux= 07:14:01 Message to Camera, serial 80081 queued [UTC 2019-3-3 07:14:37] 07:14:37 Received message from Master: op=PointingHead serial=80094 07:14:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:14:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:14:38 Point started: ret=0 07:14:38 point_skyscan result=0 07:14:39 Check angles 07:14:39 SkyScan query 07:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:14:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:14:39 Message to Master queued w/err=0: serial=80094 error=0 07:14:44 Received message from Master: op=Filter serial=80095 07:14:44 Color wheel filter change from 0 to 0 07:14:44 FLIGetFilterPos err=0 currentPosition=0 07:14:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:44 Filter is already there-color wheel unchanged 07:14:44 Received message from Master: op=Shutter serial=80096 07:14:44 Shutter LASER close 07:14:44 Received message from Camera: op=State serial=80098 07:14:44 GetSingleValue result=40 Value=cccccccc 07:14:44 SkyScan query 07:14:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:14:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:45 Parameters OK 07:14:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:45 Set A/D data flow result=40 07:14:45 Set A/D channel type result=40 07:14:45 Set A/D encoding result=40 07:14:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:45 Set channel filter=0.000000e+000 result=40 07:14:45 Config A/D Result=40 07:14:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:45 Get A/D filter: -9.255963e+061 result=40 07:14:45 Get A/D value=-858993460 result=40 07:14:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:45 Parameters OK 07:14:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:45 Set A/D data flow result=40 07:14:45 Set A/D channel type result=40 07:14:45 Set A/D encoding result=40 07:14:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:45 Set channel filter=0.000000e+000 result=40 07:14:45 Config A/D Result=40 07:14:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:45 Get A/D filter: -9.255963e+061 result=40 07:14:45 Get A/D value=-858993460 result=40 07:14:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:45 Aux= 07:14:45 Message to Camera, serial 80098 queued 07:15:22 Received message from Master: op=PointingHead serial=80111 07:15:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:15:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:15:22 Point started: ret=0 07:15:22 point_skyscan result=0 07:15:23 Check angles 07:15:23 SkyScan query 07:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.88<-13592 Statuses=0008 0009 07:15:23 Msec=0 True Az=112.995 Ze=-23.88 Az status=0008 Ze status=0009 07:15:24 Check angles 07:15:24 SkyScan query 07:15:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.82<-14988 Statuses=0008 0009 07:15:24 Msec=750 True Az=112.995 Ze=-44.82 Az status=0008 Ze status=0009 07:15:24 Check angles 07:15:24 SkyScan query 07:15:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 07:15:25 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 07:15:25 Check angles 07:15:25 SkyScan query 07:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.135<-17809 Statuses=0008 0009 07:15:26 Msec=2250 True Az=112.995 Ze=-87.135 Az status=0008 Ze status=0009 07:15:26 Check angles 07:15:26 SkyScan query 07:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.105<-19207 Statuses=0008 0009 07:15:26 Msec=3000 True Az=112.995 Ze=-108.105 Az status=0008 Ze status=0009 07:15:27 Check angles 07:15:27 SkyScan query 07:15:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.045<-20603 Statuses=0008 0009 07:15:27 Msec=3750 True Az=112.995 Ze=-129.045 Az status=0008 Ze status=0009 07:15:27 Check angles 07:15:27 SkyScan query 07:15:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.015<-22001 Statuses=0008 0009 07:15:28 Msec=4500 True Az=112.995 Ze=-150.015 Az status=0008 Ze status=0009 07:15:28 Check angles 07:15:28 SkyScan query 07:15:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 07:15:29 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 07:15:29 Check angles 07:15:29 SkyScan query 07:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:15:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:15:30 Message to Master queued w/err=0: serial=80111 error=0 07:15:35 Received message from Master: op=Filter serial=80112 07:15:35 Color wheel filter change from 0 to 0 07:15:35 FLIGetFilterPos err=0 currentPosition=0 07:15:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:35 Filter is already there-color wheel unchanged 07:15:35 Received message from Master: op=Shutter serial=80113 07:15:35 Shutter LASER open 07:15:35 Received message from Camera: op=State serial=80115 07:15:35 GetSingleValue result=40 Value=cccccccc 07:15:35 SkyScan query 07:15:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:15:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:35 Parameters OK 07:15:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:35 Set A/D data flow result=40 07:15:35 Set A/D channel type result=40 07:15:35 Set A/D encoding result=40 07:15:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:35 Set channel filter=0.000000e+000 result=40 07:15:35 Config A/D Result=40 07:15:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:35 Get A/D filter: -9.255963e+061 result=40 07:15:35 Get A/D value=-858993460 result=40 07:15:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:35 Parameters OK 07:15:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:35 Set A/D data flow result=40 07:15:35 Set A/D channel type result=40 07:15:35 Set A/D encoding result=40 07:15:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:35 Set channel filter=0.000000e+000 result=40 07:15:35 Config A/D Result=40 07:15:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:35 Get A/D filter: -9.255963e+061 result=40 07:15:35 Get A/D value=-858993460 result=40 07:15:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:35 Aux= 07:15:35 Message to Camera, serial 80115 queued 07:15:44 Received message from Master: op=Shutter serial=80125 07:15:44 Shutter LASER close 07:15:44 Received message from Master: op=PointingHead serial=80129 07:15:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:15:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:15:45 Point started: ret=0 07:15:45 point_skyscan result=0 07:15:46 Check angles 07:15:46 SkyScan query 07:15:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 07:15:46 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 07:15:46 Check angles 07:15:46 SkyScan query 07:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.755<-20117 Statuses=0008 0009 07:15:47 Msec=750 True Az=112.995 Ze=-121.755 Az status=0008 Ze status=0009 07:15:47 Check angles 07:15:47 SkyScan query 07:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.83<-18722 Statuses=0008 0009 07:15:48 Msec=1500 True Az=112.995 Ze=-100.83 Az status=0008 Ze status=0009 07:15:48 Check angles 07:15:48 SkyScan query 07:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 07:15:48 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 07:15:49 Check angles 07:15:49 SkyScan query 07:15:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 07:15:49 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 07:15:49 Check angles 07:15:49 SkyScan query 07:15:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.95<-14530 Statuses=0008 0009 07:15:50 Msec=3750 True Az=112.995 Ze=-37.95 Az status=0008 Ze status=0009 07:15:50 Check angles 07:15:50 SkyScan query 07:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 07:15:51 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 07:15:51 Check angles 07:15:51 SkyScan query 07:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=4.335<-11711 Statuses=0008 0009 07:15:51 Msec=5250 True Az=112.995 Ze=4.335 Az status=0008 Ze status=0009 07:15:52 Check angles 07:15:52 SkyScan query 07:15:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:15:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:15:52 Message to Master queued w/err=0: serial=80129 error=0 07:15:57 Received message from Master: op=Filter serial=80130 07:15:57 Color wheel filter change from 0 to 0 07:15:57 FLIGetFilterPos err=0 currentPosition=0 07:15:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:57 Filter is already there-color wheel unchanged 07:15:57 Received message from Master: op=Shutter serial=80131 07:15:57 Shutter LASER close 07:15:58 Received message from Camera: op=State serial=80133 07:15:58 GetSingleValue result=40 Value=cccccccc 07:15:58 SkyScan query 07:15:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:15:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:58 Parameters OK 07:15:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:58 Set A/D data flow result=40 07:15:58 Set A/D channel type result=40 07:15:58 Set A/D encoding result=40 07:15:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:58 Set channel filter=0.000000e+000 result=40 07:15:58 Config A/D Result=40 07:15:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:58 Get A/D filter: -9.255963e+061 result=40 07:15:58 Get A/D value=-858993460 result=40 07:15:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:58 Parameters OK 07:15:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:58 Set A/D data flow result=40 07:15:58 Set A/D channel type result=40 07:15:58 Set A/D encoding result=40 07:15:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:58 Set channel filter=0.000000e+000 result=40 07:15:58 Config A/D Result=40 07:15:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:58 Get A/D filter: -9.255963e+061 result=40 07:15:58 Get A/D value=-858993460 result=40 07:15:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:58 Aux= 07:15:58 Message to Camera, serial 80133 queued 07:16:35 Received message from Master: op=PointingHead serial=80146 07:16:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:16:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:16:35 Point started: ret=0 07:16:35 point_skyscan result=0 07:16:36 Check angles 07:16:36 SkyScan query 07:16:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:16:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:16:37 Message to Master queued w/err=0: serial=80146 error=0 07:16:42 Received message from Master: op=Filter serial=80147 07:16:42 Color wheel filter change from 0 to 0 07:16:42 FLIGetFilterPos err=0 currentPosition=0 07:16:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:42 Filter is already there-color wheel unchanged 07:16:42 Received message from Master: op=Shutter serial=80148 07:16:42 Shutter LASER close 07:16:42 Received message from Camera: op=State serial=80150 07:16:42 GetSingleValue result=40 Value=cccccccc 07:16:42 SkyScan query 07:16:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:16:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:42 Parameters OK 07:16:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:42 Set A/D data flow result=40 07:16:42 Set A/D channel type result=40 07:16:42 Set A/D encoding result=40 07:16:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:42 Set channel filter=0.000000e+000 result=40 07:16:42 Config A/D Result=40 07:16:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:42 Get A/D filter: -9.255963e+061 result=40 07:16:42 Get A/D value=-858993460 result=40 07:16:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:42 Parameters OK 07:16:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:42 Set A/D data flow result=40 07:16:42 Set A/D channel type result=40 07:16:42 Set A/D encoding result=40 07:16:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:42 Set channel filter=0.000000e+000 result=40 07:16:42 Config A/D Result=40 07:16:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:42 Get A/D filter: -9.255963e+061 result=40 07:16:42 Get A/D value=-858993460 result=40 07:16:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:42 Aux= 07:16:42 Message to Camera, serial 80150 queued 07:17:19 Received message from Master: op=PointingHead serial=80163 07:17:19 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:17:19 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:17:20 Point started: ret=0 07:17:20 point_skyscan result=0 07:17:20 Check angles 07:17:20 SkyScan query 07:17:21 SkyScan query done: ret=0 az=136.35<-9090 ze=-6.51<-12434 Statuses=0009 0008 07:17:21 Msec=0 True Az=136.35 Ze=-6.51 Az status=0009 Ze status=0008 07:17:21 Check angles 07:17:21 SkyScan query 07:17:22 SkyScan query done: ret=0 az=153.765<-10251 ze=-6.495<-12433 Statuses=0009 0008 07:17:22 Msec=750 True Az=153.765 Ze=-6.495 Az status=0009 Ze status=0008 07:17:22 Check angles 07:17:22 SkyScan query 07:17:22 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.495<-12433 Statuses=0009 0008 07:17:22 Msec=1500 True Az=171.36 Ze=-6.495 Az status=0009 Ze status=0008 07:17:23 Check angles 07:17:23 SkyScan query 07:17:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:17:23 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:17:23 Message to Master queued w/err=0: serial=80163 error=0 07:17:28 Received message from Master: op=Filter serial=80164 07:17:28 Color wheel filter change from 0 to 0 07:17:28 FLIGetFilterPos err=0 currentPosition=0 07:17:28 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:28 Filter is already there-color wheel unchanged 07:17:28 Received message from Master: op=Shutter serial=80165 07:17:28 Shutter LASER close 07:17:28 Received message from Camera: op=State serial=80167 07:17:28 GetSingleValue result=40 Value=cccccccc 07:17:28 SkyScan query 07:17:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:17:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:29 Parameters OK 07:17:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:29 Set A/D data flow result=40 07:17:29 Set A/D channel type result=40 07:17:29 Set A/D encoding result=40 07:17:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:29 Set channel filter=0.000000e+000 result=40 07:17:29 Config A/D Result=40 07:17:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:29 Get A/D filter: -9.255963e+061 result=40 07:17:29 Get A/D value=-858993460 result=40 07:17:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:29 Parameters OK 07:17:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:29 Set A/D data flow result=40 07:17:29 Set A/D channel type result=40 07:17:29 Set A/D encoding result=40 07:17:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:29 Set channel filter=0.000000e+000 result=40 07:17:29 Config A/D Result=40 07:17:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:29 Get A/D filter: -9.255963e+061 result=40 07:17:29 Get A/D value=-858993460 result=40 07:17:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:29 Aux= 07:17:29 Message to Camera, serial 80167 queued 07:18:06 Received message from Master: op=PointingHead serial=80180 07:18:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:18:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:18:06 Point started: ret=0 07:18:06 point_skyscan result=0 07:18:07 Check angles 07:18:07 SkyScan query 07:18:08 SkyScan query done: ret=0 az=152.82<-10188 ze=6.51<-11566 Statuses=0009 0008 07:18:08 Msec=0 True Az=152.82 Ze=6.51 Az status=0009 Ze status=0008 07:18:08 Check angles 07:18:08 SkyScan query 07:18:08 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 07:18:08 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 07:18:08 Check angles 07:18:08 SkyScan query 07:18:09 SkyScan query done: ret=0 az=117.855<-7857 ze=6.495<-11567 Statuses=0009 0008 07:18:09 Msec=1500 True Az=117.855 Ze=6.495 Az status=0009 Ze status=0008 07:18:09 Check angles 07:18:09 SkyScan query 07:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:18:10 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:18:10 Message to Master queued w/err=0: serial=80180 error=0 07:18:15 Received message from Master: op=Filter serial=80181 07:18:15 Color wheel filter change from 0 to 0 07:18:15 FLIGetFilterPos err=0 currentPosition=0 07:18:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:15 Filter is already there-color wheel unchanged 07:18:15 Received message from Master: op=Shutter serial=80182 07:18:15 Shutter LASER close 07:18:15 Received message from Camera: op=State serial=80184 07:18:15 GetSingleValue result=40 Value=cccccccc 07:18:15 SkyScan query 07:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:18:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:16 Parameters OK 07:18:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:16 Set A/D data flow result=40 07:18:16 Set A/D channel type result=40 07:18:16 Set A/D encoding result=40 07:18:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:16 Set channel filter=0.000000e+000 result=40 07:18:16 Config A/D Result=40 07:18:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:16 Get A/D filter: -9.255963e+061 result=40 07:18:16 Get A/D value=-858993460 result=40 07:18:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:16 Parameters OK 07:18:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:16 Set A/D data flow result=40 07:18:16 Set A/D channel type result=40 07:18:16 Set A/D encoding result=40 07:18:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:16 Set channel filter=0.000000e+000 result=40 07:18:16 Config A/D Result=40 07:18:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:16 Get A/D filter: -9.255963e+061 result=40 07:18:16 Get A/D value=-858993460 result=40 07:18:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:16 Aux= 07:18:16 Message to Camera, serial 80184 queued 07:18:52 Received message from Master: op=PointingHead serial=80197 07:18:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:18:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:18:53 Point started: ret=0 07:18:53 point_skyscan result=0 07:18:54 Check angles 07:18:54 SkyScan query 07:18:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.4<-13560 Statuses=0008 0009 07:18:54 Msec=0 True Az=112.995 Ze=-23.4 Az status=0008 Ze status=0009 07:18:54 Check angles 07:18:54 SkyScan query 07:18:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 07:18:55 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 07:18:55 Check angles 07:18:55 SkyScan query 07:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 07:18:56 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 07:18:56 Check angles 07:18:56 SkyScan query 07:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.135<-17809 Statuses=0008 0009 07:18:56 Msec=2250 True Az=112.995 Ze=-87.135 Az status=0008 Ze status=0009 07:18:57 Check angles 07:18:57 SkyScan query 07:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 07:18:57 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 07:18:57 Check angles 07:18:57 SkyScan query 07:18:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.06<-20604 Statuses=0008 0009 07:18:58 Msec=3750 True Az=112.995 Ze=-129.06 Az status=0008 Ze status=0009 07:18:58 Check angles 07:18:58 SkyScan query 07:18:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.03<-22002 Statuses=0008 0009 07:18:59 Msec=4500 True Az=112.995 Ze=-150.03 Az status=0008 Ze status=0009 07:18:59 Check angles 07:18:59 SkyScan query 07:18:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0008 0009 07:18:59 Msec=5250 True Az=112.995 Ze=-170.865 Az status=0008 Ze status=0009 07:19:00 Check angles 07:19:00 SkyScan query 07:19:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:19:00 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:19:00 Message to Master queued w/err=0: serial=80197 error=0 07:19:05 Received message from Master: op=Filter serial=80198 07:19:05 Color wheel filter change from 0 to 0 07:19:05 FLIGetFilterPos err=0 currentPosition=0 07:19:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:05 Filter is already there-color wheel unchanged 07:19:05 Received message from Master: op=Shutter serial=80199 07:19:05 Shutter LASER open 07:19:05 Received message from Camera: op=State serial=80201 07:19:05 GetSingleValue result=40 Value=cccccccc 07:19:05 SkyScan query 07:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:19:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:06 Parameters OK 07:19:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:06 Set A/D data flow result=40 07:19:06 Set A/D channel type result=40 07:19:06 Set A/D encoding result=40 07:19:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:06 Set channel filter=0.000000e+000 result=40 07:19:06 Config A/D Result=40 07:19:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:06 Get A/D filter: -9.255963e+061 result=40 07:19:06 Get A/D value=-858993460 result=40 07:19:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:06 Parameters OK 07:19:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:06 Set A/D data flow result=40 07:19:06 Set A/D channel type result=40 07:19:06 Set A/D encoding result=40 07:19:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:06 Set channel filter=0.000000e+000 result=40 07:19:06 Config A/D Result=40 07:19:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:06 Get A/D filter: -9.255963e+061 result=40 07:19:06 Get A/D value=-858993460 result=40 07:19:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:06 Aux= 07:19:06 Message to Camera, serial 80201 queued 07:19:14 Received message from Master: op=Shutter serial=80211 07:19:14 Shutter LASER close 07:19:15 Received message from Master: op=PointingHead serial=80215 07:19:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:19:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:19:15 Point started: ret=0 07:19:15 point_skyscan result=0 07:19:16 Check angles 07:19:16 SkyScan query 07:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.77<-21518 Statuses=0008 0009 07:19:17 Msec=0 True Az=112.995 Ze=-142.77 Az status=0008 Ze status=0009 07:19:17 Check angles 07:19:17 SkyScan query 07:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.395<-20093 Statuses=0008 0009 07:19:17 Msec=750 True Az=112.995 Ze=-121.395 Az status=0008 Ze status=0009 07:19:18 Check angles 07:19:18 SkyScan query 07:19:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.005<-18667 Statuses=0008 0009 07:19:18 Msec=1500 True Az=112.995 Ze=-100.005 Az status=0008 Ze status=0009 07:19:18 Check angles 07:19:18 SkyScan query 07:19:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.035<-17269 Statuses=0008 0009 07:19:19 Msec=2250 True Az=112.995 Ze=-79.035 Az status=0008 Ze status=0009 07:19:19 Check angles 07:19:19 SkyScan query 07:19:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.065<-15871 Statuses=0008 0009 07:19:20 Msec=3000 True Az=112.995 Ze=-58.065 Az status=0008 Ze status=0009 07:19:20 Check angles 07:19:20 SkyScan query 07:19:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.14<-14476 Statuses=0008 0009 07:19:20 Msec=3750 True Az=112.995 Ze=-37.14 Az status=0008 Ze status=0009 07:19:21 Check angles 07:19:21 SkyScan query 07:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.17<-13078 Statuses=0008 0009 07:19:21 Msec=4500 True Az=112.995 Ze=-16.17 Az status=0008 Ze status=0009 07:19:21 Check angles 07:19:21 SkyScan query 07:19:22 SkyScan query done: ret=0 az=112.995<-7533 ze=4.95<-11670 Statuses=0008 0009 07:19:22 Msec=5250 True Az=112.995 Ze=4.95 Az status=0008 Ze status=0009 07:19:22 Check angles 07:19:22 SkyScan query 07:19:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:19:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:19:23 Message to Master queued w/err=0: serial=80215 error=0 07:19:28 Received message from Master: op=Filter serial=80216 07:19:28 Color wheel filter change from 0 to 0 07:19:28 FLIGetFilterPos err=0 currentPosition=0 07:19:28 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:28 Filter is already there-color wheel unchanged 07:19:28 Received message from Master: op=Shutter serial=80217 07:19:28 Shutter LASER close 07:19:28 Received message from Camera: op=State serial=80219 07:19:28 GetSingleValue result=40 Value=cccccccc 07:19:28 SkyScan query 07:19:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:19:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:29 Parameters OK 07:19:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:29 Set A/D data flow result=40 07:19:29 Set A/D channel type result=40 07:19:29 Set A/D encoding result=40 07:19:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:29 Set channel filter=0.000000e+000 result=40 07:19:29 Config A/D Result=40 07:19:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:29 Get A/D filter: -9.255963e+061 result=40 07:19:29 Get A/D value=-858993460 result=40 07:19:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:29 Parameters OK 07:19:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:29 Set A/D data flow result=40 07:19:29 Set A/D channel type result=40 07:19:29 Set A/D encoding result=40 07:19:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:29 Set channel filter=0.000000e+000 result=40 07:19:29 Config A/D Result=40 07:19:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:29 Get A/D filter: -9.255963e+061 result=40 07:19:29 Get A/D value=-858993460 result=40 07:19:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:29 Aux= 07:19:29 Message to Camera, serial 80219 queued 07:20:05 Received message from Master: op=PointingHead serial=80232 07:20:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:20:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:20:06 Point started: ret=0 07:20:06 point_skyscan result=0 07:20:07 Check angles 07:20:07 SkyScan query 07:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:20:07 Message to Master queued w/err=0: serial=80232 error=0 07:20:12 Received message from Master: op=Filter serial=80233 07:20:12 Color wheel filter change from 0 to 0 07:20:12 FLIGetFilterPos err=0 currentPosition=0 07:20:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:12 Filter is already there-color wheel unchanged 07:20:12 Received message from Master: op=Shutter serial=80234 07:20:12 Shutter LASER close 07:20:12 Received message from Camera: op=State serial=80236 07:20:12 GetSingleValue result=40 Value=cccccccc 07:20:12 SkyScan query 07:20:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:13 Parameters OK 07:20:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:13 Set A/D data flow result=40 07:20:13 Set A/D channel type result=40 07:20:13 Set A/D encoding result=40 07:20:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:13 Set channel filter=0.000000e+000 result=40 07:20:13 Config A/D Result=40 07:20:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:13 Get A/D filter: -9.255963e+061 result=40 07:20:13 Get A/D value=-858993460 result=40 07:20:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:13 Parameters OK 07:20:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:13 Set A/D data flow result=40 07:20:13 Set A/D channel type result=40 07:20:13 Set A/D encoding result=40 07:20:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:13 Set channel filter=0.000000e+000 result=40 07:20:13 Config A/D Result=40 07:20:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:13 Get A/D filter: -9.255963e+061 result=40 07:20:13 Get A/D value=-858993460 result=40 07:20:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:13 Aux= 07:20:13 Message to Camera, serial 80236 queued 07:20:50 Received message from Master: op=PointingHead serial=80249 07:20:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:20:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:20:50 Point started: ret=0 07:20:50 point_skyscan result=0 07:20:51 Check angles 07:20:51 SkyScan query 07:20:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:20:51 Message to Master queued w/err=0: serial=80249 error=0 07:20:56 Received message from Master: op=Filter serial=80250 07:20:56 Color wheel filter change from 0 to 0 07:20:56 FLIGetFilterPos err=0 currentPosition=0 07:20:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:56 Filter is already there-color wheel unchanged 07:20:57 Received message from Master: op=Shutter serial=80251 07:20:57 Shutter LASER close 07:20:57 Received message from Camera: op=State serial=80253 07:20:57 GetSingleValue result=40 Value=cccccccc 07:20:57 SkyScan query 07:20:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:57 Parameters OK 07:20:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:57 Set A/D data flow result=40 07:20:57 Set A/D channel type result=40 07:20:57 Set A/D encoding result=40 07:20:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:57 Set channel filter=0.000000e+000 result=40 07:20:57 Config A/D Result=40 07:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:57 Get A/D filter: -9.255963e+061 result=40 07:20:57 Get A/D value=-858993460 result=40 07:20:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:57 Parameters OK 07:20:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:57 Set A/D data flow result=40 07:20:57 Set A/D channel type result=40 07:20:57 Set A/D encoding result=40 07:20:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:57 Set channel filter=0.000000e+000 result=40 07:20:57 Config A/D Result=40 07:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:57 Get A/D filter: -9.255963e+061 result=40 07:20:57 Get A/D value=-858993460 result=40 07:20:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:57 Aux= 07:20:57 Message to Camera, serial 80253 queued 07:21:34 Received message from Master: op=PointingHead serial=80266 07:21:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:21:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:21:34 Point started: ret=0 07:21:34 point_skyscan result=0 07:21:35 Check angles 07:21:35 SkyScan query 07:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:21:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:21:36 Message to Master queued w/err=0: serial=80266 error=0 07:21:41 Received message from Master: op=Filter serial=80267 07:21:41 Color wheel filter change from 0 to 0 07:21:41 FLIGetFilterPos err=0 currentPosition=0 07:21:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:41 Filter is already there-color wheel unchanged 07:21:41 Received message from Master: op=Shutter serial=80268 07:21:41 Shutter LASER close 07:21:41 Received message from Camera: op=State serial=80270 07:21:41 GetSingleValue result=40 Value=cccccccc 07:21:41 SkyScan query 07:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:21:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:42 Parameters OK 07:21:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:42 Set A/D data flow result=40 07:21:42 Set A/D channel type result=40 07:21:42 Set A/D encoding result=40 07:21:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:42 Set channel filter=0.000000e+000 result=40 07:21:42 Config A/D Result=40 07:21:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:42 Get A/D filter: -9.255963e+061 result=40 07:21:42 Get A/D value=-858993460 result=40 07:21:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:42 Parameters OK 07:21:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:42 Set A/D data flow result=40 07:21:42 Set A/D channel type result=40 07:21:42 Set A/D encoding result=40 07:21:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:42 Set channel filter=0.000000e+000 result=40 07:21:42 Config A/D Result=40 07:21:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:42 Get A/D filter: -9.255963e+061 result=40 07:21:42 Get A/D value=-858993460 result=40 07:21:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:42 Aux= 07:21:42 Message to Camera, serial 80270 queued 07:22:18 Received message from Master: op=PointingHead serial=80283 07:22:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:22:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:22:19 Point started: ret=0 07:22:19 point_skyscan result=0 07:22:20 Check angles 07:22:20 SkyScan query 07:22:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 07:22:20 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 07:22:20 Check angles 07:22:20 SkyScan query 07:22:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 07:22:21 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 07:22:21 Check angles 07:22:21 SkyScan query 07:22:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.895<-16393 Statuses=0008 0009 07:22:22 Msec=1500 True Az=112.995 Ze=-65.895 Az status=0008 Ze status=0009 07:22:22 Check angles 07:22:22 SkyScan query 07:22:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 07:22:22 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 07:22:23 Check angles 07:22:23 SkyScan query 07:22:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.805<-19187 Statuses=0008 0009 07:22:23 Msec=3000 True Az=112.995 Ze=-107.805 Az status=0008 Ze status=0009 07:22:23 Check angles 07:22:23 SkyScan query 07:22:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.18<-20612 Statuses=0008 0009 07:22:24 Msec=3750 True Az=112.995 Ze=-129.18 Az status=0008 Ze status=0009 07:22:24 Check angles 07:22:24 SkyScan query 07:22:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.135<-22009 Statuses=0008 0009 07:22:25 Msec=4500 True Az=112.995 Ze=-150.135 Az status=0008 Ze status=0009 07:22:25 Check angles 07:22:25 SkyScan query 07:22:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0008 0009 07:22:25 Msec=5250 True Az=112.995 Ze=-170.97 Az status=0008 Ze status=0009 07:22:26 Check angles 07:22:26 SkyScan query 07:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:22:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:22:26 Message to Master queued w/err=0: serial=80283 error=0 07:22:31 Received message from Master: op=Filter serial=80284 07:22:31 Color wheel filter change from 0 to 0 07:22:31 FLIGetFilterPos err=0 currentPosition=0 07:22:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:31 Filter is already there-color wheel unchanged 07:22:31 Received message from Master: op=Shutter serial=80285 07:22:31 Shutter LASER open 07:22:31 Received message from Camera: op=State serial=80287 07:22:31 GetSingleValue result=40 Value=cccccccc 07:22:31 SkyScan query 07:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:22:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:32 Parameters OK 07:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:32 Set A/D data flow result=40 07:22:32 Set A/D channel type result=40 07:22:32 Set A/D encoding result=40 07:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:32 Set channel filter=0.000000e+000 result=40 07:22:32 Config A/D Result=40 07:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:32 Get A/D filter: -9.255963e+061 result=40 07:22:32 Get A/D value=-858993460 result=40 07:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:32 Parameters OK 07:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:32 Set A/D data flow result=40 07:22:32 Set A/D channel type result=40 07:22:32 Set A/D encoding result=40 07:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:32 Set channel filter=0.000000e+000 result=40 07:22:32 Config A/D Result=40 07:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:32 Get A/D filter: -9.255963e+061 result=40 07:22:32 Get A/D value=-858993460 result=40 07:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:32 Aux= 07:22:32 Message to Camera, serial 80287 queued 07:22:40 Received message from Master: op=Shutter serial=80297 07:22:41 Shutter LASER close 07:22:41 Received message from Master: op=PointingHead serial=80301 07:22:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:22:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:22:41 Point started: ret=0 07:22:41 point_skyscan result=0 07:22:42 Check angles 07:22:42 SkyScan query 07:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 07:22:43 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 07:22:43 Check angles 07:22:43 SkyScan query 07:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 07:22:43 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 07:22:44 Check angles 07:22:44 SkyScan query 07:22:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 07:22:44 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 07:22:44 Check angles 07:22:44 SkyScan query 07:22:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 07:22:45 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 07:22:45 Check angles 07:22:45 SkyScan query 07:22:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 07:22:46 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 07:22:46 Check angles 07:22:46 SkyScan query 07:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.53<-14502 Statuses=0008 0009 07:22:47 Msec=3750 True Az=112.995 Ze=-37.53 Az status=0008 Ze status=0009 07:22:47 Check angles 07:22:47 SkyScan query 07:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.11<-13074 Statuses=0008 0009 07:22:47 Msec=4500 True Az=112.995 Ze=-16.11 Az status=0008 Ze status=0009 07:22:47 Check angles 07:22:47 SkyScan query 07:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 07:22:48 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 07:22:48 Check angles 07:22:48 SkyScan query 07:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:22:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:22:49 Message to Master queued w/err=0: serial=80301 error=0 07:22:54 Received message from Master: op=Filter serial=80302 07:22:54 Color wheel filter change from 0 to 0 07:22:54 FLIGetFilterPos err=0 currentPosition=0 07:22:54 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:54 Filter is already there-color wheel unchanged 07:22:54 Received message from Master: op=Shutter serial=80303 07:22:54 Shutter LASER close 07:22:54 Received message from Camera: op=State serial=80305 07:22:54 GetSingleValue result=40 Value=cccccccc 07:22:54 SkyScan query 07:22:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:22:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:55 Parameters OK 07:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:55 Set A/D data flow result=40 07:22:55 Set A/D channel type result=40 07:22:55 Set A/D encoding result=40 07:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:55 Set channel filter=0.000000e+000 result=40 07:22:55 Config A/D Result=40 07:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:55 Get A/D filter: -9.255963e+061 result=40 07:22:55 Get A/D value=-858993460 result=40 07:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:55 Parameters OK 07:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:55 Set A/D data flow result=40 07:22:55 Set A/D channel type result=40 07:22:55 Set A/D encoding result=40 07:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:55 Set channel filter=0.000000e+000 result=40 07:22:55 Config A/D Result=40 07:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:55 Get A/D filter: -9.255963e+061 result=40 07:22:55 Get A/D value=-858993460 result=40 07:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:55 Aux= 07:22:55 Message to Camera, serial 80305 queued 07:23:32 Received message from Master: op=PointingHead serial=80318 07:23:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:23:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:23:32 Point started: ret=0 07:23:32 point_skyscan result=0 07:23:33 Check angles 07:23:33 SkyScan query 07:23:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:23:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:23:33 Message to Master queued w/err=0: serial=80318 error=0 07:23:38 Received message from Master: op=Filter serial=80319 07:23:38 Color wheel filter change from 0 to 0 07:23:38 FLIGetFilterPos err=0 currentPosition=0 07:23:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:38 Filter is already there-color wheel unchanged 07:23:38 Received message from Master: op=Shutter serial=80320 07:23:38 Shutter LASER close 07:23:38 Received message from Camera: op=State serial=80322 07:23:38 GetSingleValue result=40 Value=cccccccc 07:23:38 SkyScan query 07:23:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:23:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:39 Parameters OK 07:23:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:39 Set A/D data flow result=40 07:23:39 Set A/D channel type result=40 07:23:39 Set A/D encoding result=40 07:23:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:39 Set channel filter=0.000000e+000 result=40 07:23:39 Config A/D Result=40 07:23:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:39 Get A/D filter: -9.255963e+061 result=40 07:23:39 Get A/D value=-858993460 result=40 07:23:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:39 Parameters OK 07:23:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:39 Set A/D data flow result=40 07:23:39 Set A/D channel type result=40 07:23:39 Set A/D encoding result=40 07:23:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:39 Set channel filter=0.000000e+000 result=40 07:23:39 Config A/D Result=40 07:23:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:39 Get A/D filter: -9.255963e+061 result=40 07:23:39 Get A/D value=-858993460 result=40 07:23:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:39 Aux= 07:23:39 Message to Camera, serial 80322 queued [UTC 2019-3-3 07:23:50] 07:24:16 Received message from Master: op=PointingHead serial=80335 07:24:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:24:16 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:24:16 Point started: ret=0 07:24:16 point_skyscan result=0 07:24:17 Check angles 07:24:17 SkyScan query 07:24:17 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 07:24:17 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 07:24:18 Check angles 07:24:18 SkyScan query 07:24:18 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 07:24:18 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 07:24:18 Check angles 07:24:18 SkyScan query 07:24:19 SkyScan query done: ret=0 az=170.955<-11397 ze=-6.495<-12433 Statuses=0009 0008 07:24:19 Msec=1500 True Az=170.955 Ze=-6.495 Az status=0009 Ze status=0008 07:24:19 Check angles 07:24:19 SkyScan query 07:24:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:24:20 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:24:20 Message to Master queued w/err=0: serial=80335 error=0 07:24:25 Received message from Master: op=Filter serial=80336 07:24:25 Color wheel filter change from 0 to 0 07:24:25 FLIGetFilterPos err=0 currentPosition=0 07:24:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:25 Filter is already there-color wheel unchanged 07:24:25 Received message from Master: op=Shutter serial=80337 07:24:25 Shutter LASER close 07:24:25 Received message from Camera: op=State serial=80339 07:24:25 GetSingleValue result=40 Value=cccccccc 07:24:25 SkyScan query 07:24:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:24:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:26 Parameters OK 07:24:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:26 Set A/D data flow result=40 07:24:26 Set A/D channel type result=40 07:24:26 Set A/D encoding result=40 07:24:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:26 Set channel filter=0.000000e+000 result=40 07:24:26 Config A/D Result=40 07:24:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:26 Get A/D filter: -9.255963e+061 result=40 07:24:26 Get A/D value=-858993460 result=40 07:24:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:26 Parameters OK 07:24:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:26 Set A/D data flow result=40 07:24:26 Set A/D channel type result=40 07:24:26 Set A/D encoding result=40 07:24:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:26 Set channel filter=0.000000e+000 result=40 07:24:26 Config A/D Result=40 07:24:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:26 Get A/D filter: -9.255963e+061 result=40 07:24:26 Get A/D value=-858993460 result=40 07:24:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:26 Aux= 07:24:26 Message to Camera, serial 80339 queued 07:25:02 Received message from Master: op=PointingHead serial=80352 07:25:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:25:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:25:03 Point started: ret=0 07:25:03 point_skyscan result=0 07:25:03 Check angles 07:25:03 SkyScan query 07:25:04 SkyScan query done: ret=0 az=153.03<-10202 ze=6.51<-11566 Statuses=0009 0008 07:25:04 Msec=0 True Az=153.03 Ze=6.51 Az status=0009 Ze status=0008 07:25:04 Check angles 07:25:04 SkyScan query 07:25:05 SkyScan query done: ret=0 az=135.57<-9038 ze=6.495<-11567 Statuses=0009 0008 07:25:05 Msec=750 True Az=135.57 Ze=6.495 Az status=0009 Ze status=0008 07:25:05 Check angles 07:25:05 SkyScan query 07:25:06 SkyScan query done: ret=0 az=118.065<-7871 ze=6.495<-11567 Statuses=0009 0008 07:25:06 Msec=1500 True Az=118.065 Ze=6.495 Az status=0009 Ze status=0008 07:25:06 Check angles 07:25:06 SkyScan query 07:25:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:25:06 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:25:06 Message to Master queued w/err=0: serial=80352 error=0 07:25:11 Received message from Master: op=Filter serial=80353 07:25:11 Color wheel filter change from 0 to 0 07:25:11 FLIGetFilterPos err=0 currentPosition=0 07:25:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:11 Filter is already there-color wheel unchanged 07:25:11 Received message from Master: op=Shutter serial=80354 07:25:11 Shutter LASER close 07:25:12 Received message from Camera: op=State serial=80356 07:25:12 GetSingleValue result=40 Value=cccccccc 07:25:12 SkyScan query 07:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:25:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:12 Parameters OK 07:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:12 Set A/D data flow result=40 07:25:12 Set A/D channel type result=40 07:25:12 Set A/D encoding result=40 07:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:12 Set channel filter=0.000000e+000 result=40 07:25:12 Config A/D Result=40 07:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:12 Get A/D filter: -9.255963e+061 result=40 07:25:12 Get A/D value=-858993460 result=40 07:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:12 Parameters OK 07:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:12 Set A/D data flow result=40 07:25:12 Set A/D channel type result=40 07:25:12 Set A/D encoding result=40 07:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:12 Set channel filter=0.000000e+000 result=40 07:25:12 Config A/D Result=40 07:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:12 Get A/D filter: -9.255963e+061 result=40 07:25:12 Get A/D value=-858993460 result=40 07:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:12 Aux= 07:25:12 Message to Camera, serial 80356 queued 07:25:49 Received message from Master: op=PointingHead serial=80369 07:25:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:25:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:25:49 Point started: ret=0 07:25:49 point_skyscan result=0 07:25:50 Check angles 07:25:50 SkyScan query 07:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 07:25:51 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 07:25:51 Check angles 07:25:51 SkyScan query 07:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 07:25:51 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 07:25:52 Check angles 07:25:52 SkyScan query 07:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.925<-16395 Statuses=0008 0009 07:25:52 Msec=1500 True Az=112.995 Ze=-65.925 Az status=0008 Ze status=0009 07:25:52 Check angles 07:25:52 SkyScan query 07:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.85<-17790 Statuses=0008 0009 07:25:53 Msec=2250 True Az=112.995 Ze=-86.85 Az status=0008 Ze status=0009 07:25:53 Check angles 07:25:53 SkyScan query 07:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.835<-19189 Statuses=0008 0009 07:25:54 Msec=3000 True Az=112.995 Ze=-107.835 Az status=0008 Ze status=0009 07:25:54 Check angles 07:25:54 SkyScan query 07:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.21<-20614 Statuses=0008 0009 07:25:54 Msec=3750 True Az=112.995 Ze=-129.21 Az status=0008 Ze status=0009 07:25:55 Check angles 07:25:55 SkyScan query 07:25:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.18<-22012 Statuses=0008 0009 07:25:55 Msec=4500 True Az=112.995 Ze=-150.18 Az status=0008 Ze status=0009 07:25:55 Check angles 07:25:55 SkyScan query 07:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0008 0009 07:25:56 Msec=5250 True Az=112.995 Ze=-170.985 Az status=0008 Ze status=0009 07:25:56 Check angles 07:25:56 SkyScan query 07:25:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:25:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:25:57 Message to Master queued w/err=0: serial=80369 error=0 07:26:02 Received message from Master: op=Filter serial=80370 07:26:02 Color wheel filter change from 0 to 0 07:26:02 FLIGetFilterPos err=0 currentPosition=0 07:26:02 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:02 Filter is already there-color wheel unchanged 07:26:02 Received message from Master: op=Shutter serial=80371 07:26:02 Shutter LASER open 07:26:02 Received message from Camera: op=State serial=80373 07:26:02 GetSingleValue result=40 Value=cccccccc 07:26:02 SkyScan query 07:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:26:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:03 Parameters OK 07:26:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:03 Set A/D data flow result=40 07:26:03 Set A/D channel type result=40 07:26:03 Set A/D encoding result=40 07:26:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:03 Set channel filter=0.000000e+000 result=40 07:26:03 Config A/D Result=40 07:26:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:03 Get A/D filter: -9.255963e+061 result=40 07:26:03 Get A/D value=-858993460 result=40 07:26:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:03 Parameters OK 07:26:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:03 Set A/D data flow result=40 07:26:03 Set A/D channel type result=40 07:26:03 Set A/D encoding result=40 07:26:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:03 Set channel filter=0.000000e+000 result=40 07:26:03 Config A/D Result=40 07:26:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:03 Get A/D filter: -9.255963e+061 result=40 07:26:03 Get A/D value=-858993460 result=40 07:26:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:03 Aux= 07:26:03 Message to Camera, serial 80373 queued 07:26:11 Received message from Master: op=Shutter serial=80383 07:26:11 Shutter LASER close 07:26:12 Received message from Master: op=PointingHead serial=80387 07:26:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:26:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:26:12 Point started: ret=0 07:26:12 point_skyscan result=0 07:26:13 Check angles 07:26:13 SkyScan query 07:26:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 07:26:13 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 07:26:13 Check angles 07:26:13 SkyScan query 07:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 07:26:14 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 07:26:14 Check angles 07:26:14 SkyScan query 07:26:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 07:26:15 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 07:26:15 Check angles 07:26:15 SkyScan query 07:26:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.115<-17341 Statuses=0008 0009 07:26:15 Msec=2250 True Az=112.995 Ze=-80.115 Az status=0008 Ze status=0009 07:26:16 Check angles 07:26:16 SkyScan query 07:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 07:26:16 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 07:26:16 Check angles 07:26:16 SkyScan query 07:26:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 07:26:17 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 07:26:17 Check angles 07:26:17 SkyScan query 07:26:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 07:26:18 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 07:26:18 Check angles 07:26:18 SkyScan query 07:26:18 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 07:26:18 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 07:26:19 Check angles 07:26:19 SkyScan query 07:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:26:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:26:19 Message to Master queued w/err=0: serial=80387 error=0 07:26:24 Received message from Master: op=Filter serial=80388 07:26:24 Color wheel filter change from 0 to 0 07:26:24 FLIGetFilterPos err=0 currentPosition=0 07:26:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:24 Filter is already there-color wheel unchanged 07:26:24 Received message from Master: op=Shutter serial=80389 07:26:24 Shutter LASER close 07:26:25 Received message from Camera: op=State serial=80391 07:26:25 GetSingleValue result=40 Value=cccccccc 07:26:25 SkyScan query 07:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:26:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:25 Parameters OK 07:26:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:25 Set A/D data flow result=40 07:26:25 Set A/D channel type result=40 07:26:25 Set A/D encoding result=40 07:26:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:25 Set channel filter=0.000000e+000 result=40 07:26:25 Config A/D Result=40 07:26:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:25 Get A/D filter: -9.255963e+061 result=40 07:26:25 Get A/D value=-858993460 result=40 07:26:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:25 Parameters OK 07:26:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:25 Set A/D data flow result=40 07:26:25 Set A/D channel type result=40 07:26:25 Set A/D encoding result=40 07:26:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:25 Set channel filter=0.000000e+000 result=40 07:26:25 Config A/D Result=40 07:26:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:25 Get A/D filter: -9.255963e+061 result=40 07:26:25 Get A/D value=-858993460 result=40 07:26:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:25 Aux= 07:26:25 Message to Camera, serial 80391 queued 07:27:02 Received message from Master: op=PointingHead serial=80404 07:27:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:27:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:27:02 Point started: ret=0 07:27:02 point_skyscan result=0 07:27:03 Check angles 07:27:03 SkyScan query 07:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:27:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:27:04 Message to Master queued w/err=0: serial=80404 error=0 07:27:09 Received message from Master: op=Filter serial=80405 07:27:09 Color wheel filter change from 0 to 0 07:27:09 FLIGetFilterPos err=0 currentPosition=0 07:27:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:09 Filter is already there-color wheel unchanged 07:27:09 Received message from Master: op=Shutter serial=80406 07:27:09 Shutter LASER close 07:27:09 Received message from Camera: op=State serial=80408 07:27:09 GetSingleValue result=40 Value=cccccccc 07:27:09 SkyScan query 07:27:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:27:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:09 Parameters OK 07:27:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:09 Set A/D data flow result=40 07:27:09 Set A/D channel type result=40 07:27:09 Set A/D encoding result=40 07:27:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:09 Set channel filter=0.000000e+000 result=40 07:27:09 Config A/D Result=40 07:27:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:09 Get A/D filter: -9.255963e+061 result=40 07:27:09 Get A/D value=-858993460 result=40 07:27:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:09 Parameters OK 07:27:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:09 Set A/D data flow result=40 07:27:09 Set A/D channel type result=40 07:27:09 Set A/D encoding result=40 07:27:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:09 Set channel filter=0.000000e+000 result=40 07:27:09 Config A/D Result=40 07:27:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:09 Get A/D filter: -9.255963e+061 result=40 07:27:09 Get A/D value=-858993460 result=40 07:27:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:09 Aux= 07:27:09 Message to Camera, serial 80408 queued 07:27:46 Received message from Master: op=PointingHead serial=80421 07:27:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:27:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:27:47 Point started: ret=0 07:27:47 point_skyscan result=0 07:27:47 Check angles 07:27:47 SkyScan query 07:27:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:27:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:27:48 Message to Master queued w/err=0: serial=80421 error=0 07:27:53 Received message from Master: op=Filter serial=80422 07:27:53 Color wheel filter change from 0 to 0 07:27:53 FLIGetFilterPos err=0 currentPosition=0 07:27:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:53 Filter is already there-color wheel unchanged 07:27:53 Received message from Master: op=Shutter serial=80423 07:27:53 Shutter LASER close 07:27:53 Received message from Camera: op=State serial=80425 07:27:53 GetSingleValue result=40 Value=cccccccc 07:27:53 SkyScan query 07:27:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:27:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:54 Parameters OK 07:27:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:54 Set A/D data flow result=40 07:27:54 Set A/D channel type result=40 07:27:54 Set A/D encoding result=40 07:27:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:54 Set channel filter=0.000000e+000 result=40 07:27:54 Config A/D Result=40 07:27:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:54 Get A/D filter: -9.255963e+061 result=40 07:27:54 Get A/D value=-858993460 result=40 07:27:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:54 Parameters OK 07:27:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:54 Set A/D data flow result=40 07:27:54 Set A/D channel type result=40 07:27:54 Set A/D encoding result=40 07:27:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:54 Set channel filter=0.000000e+000 result=40 07:27:54 Config A/D Result=40 07:27:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:54 Get A/D filter: -9.255963e+061 result=40 07:27:54 Get A/D value=-858993460 result=40 07:27:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:54 Aux= 07:27:54 Message to Camera, serial 80425 queued 07:28:31 Received message from Master: op=PointingHead serial=80438 07:28:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:28:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:28:31 Point started: ret=0 07:28:31 point_skyscan result=0 07:28:32 Check angles 07:28:32 SkyScan query 07:28:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:28:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:28:32 Message to Master queued w/err=0: serial=80438 error=0 07:28:37 Received message from Master: op=Filter serial=80439 07:28:37 Color wheel filter change from 0 to 0 07:28:37 FLIGetFilterPos err=0 currentPosition=0 07:28:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:37 Filter is already there-color wheel unchanged 07:28:37 Received message from Master: op=Shutter serial=80440 07:28:37 Shutter LASER close 07:28:38 Received message from Camera: op=State serial=80442 07:28:38 GetSingleValue result=40 Value=cccccccc 07:28:38 SkyScan query 07:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:28:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:38 Parameters OK 07:28:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:38 Set A/D data flow result=40 07:28:38 Set A/D channel type result=40 07:28:38 Set A/D encoding result=40 07:28:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:38 Set channel filter=0.000000e+000 result=40 07:28:38 Config A/D Result=40 07:28:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:38 Get A/D filter: -9.255963e+061 result=40 07:28:38 Get A/D value=-858993460 result=40 07:28:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:38 Parameters OK 07:28:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:38 Set A/D data flow result=40 07:28:38 Set A/D channel type result=40 07:28:38 Set A/D encoding result=40 07:28:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:38 Set channel filter=0.000000e+000 result=40 07:28:38 Config A/D Result=40 07:28:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:38 Get A/D filter: -9.255963e+061 result=40 07:28:38 Get A/D value=-858993460 result=40 07:28:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:38 Aux= 07:28:38 Message to Camera, serial 80442 queued 07:29:15 Received message from Master: op=PointingHead serial=80455 07:29:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:29:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:29:15 Point started: ret=0 07:29:15 point_skyscan result=0 07:29:16 Check angles 07:29:16 SkyScan query 07:29:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 07:29:17 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 07:29:17 Check angles 07:29:17 SkyScan query 07:29:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 07:29:17 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 07:29:17 Check angles 07:29:17 SkyScan query 07:29:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.025<-16335 Statuses=0008 0009 07:29:18 Msec=1500 True Az=112.995 Ze=-65.025 Az status=0008 Ze status=0009 07:29:18 Check angles 07:29:18 SkyScan query 07:29:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.01<-17734 Statuses=0008 0009 07:29:19 Msec=2250 True Az=112.995 Ze=-86.01 Az status=0008 Ze status=0009 07:29:19 Check angles 07:29:19 SkyScan query 07:29:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.92<-19128 Statuses=0008 0009 07:29:20 Msec=3000 True Az=112.995 Ze=-106.92 Az status=0008 Ze status=0009 07:29:20 Check angles 07:29:20 SkyScan query 07:29:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.89<-20526 Statuses=0008 0009 07:29:20 Msec=3750 True Az=112.995 Ze=-127.89 Az status=0008 Ze status=0009 07:29:20 Check angles 07:29:20 SkyScan query 07:29:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.83<-21922 Statuses=0008 0009 07:29:21 Msec=4500 True Az=112.995 Ze=-148.83 Az status=0008 Ze status=0009 07:29:21 Check angles 07:29:21 SkyScan query 07:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.755<-23317 Statuses=0008 0009 07:29:22 Msec=5250 True Az=112.995 Ze=-169.755 Az status=0008 Ze status=0009 07:29:22 Check angles 07:29:22 SkyScan query 07:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:29:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:29:23 Message to Master queued w/err=0: serial=80455 error=0 07:29:28 Received message from Master: op=Filter serial=80456 07:29:28 Color wheel filter change from 0 to 0 07:29:28 FLIGetFilterPos err=0 currentPosition=0 07:29:28 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:28 Filter is already there-color wheel unchanged 07:29:28 Received message from Master: op=Shutter serial=80457 07:29:28 Shutter LASER open 07:29:28 Received message from Camera: op=State serial=80459 07:29:28 GetSingleValue result=40 Value=cccccccc 07:29:28 SkyScan query 07:29:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:29:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:28 Parameters OK 07:29:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:28 Set A/D data flow result=40 07:29:28 Set A/D channel type result=40 07:29:28 Set A/D encoding result=40 07:29:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:28 Set channel filter=0.000000e+000 result=40 07:29:28 Config A/D Result=40 07:29:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:28 Get A/D filter: -9.255963e+061 result=40 07:29:28 Get A/D value=-858993460 result=40 07:29:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:28 Parameters OK 07:29:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:28 Set A/D data flow result=40 07:29:28 Set A/D channel type result=40 07:29:28 Set A/D encoding result=40 07:29:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:28 Set channel filter=0.000000e+000 result=40 07:29:28 Config A/D Result=40 07:29:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:28 Get A/D filter: -9.255963e+061 result=40 07:29:28 Get A/D value=-858993460 result=40 07:29:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:28 Aux= 07:29:28 Message to Camera, serial 80459 queued 07:29:36 Received message from Master: op=Shutter serial=80468 07:29:36 Shutter LASER close 07:29:37 Received message from Master: op=PointingHead serial=80472 07:29:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:29:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:29:37 Point started: ret=0 07:29:37 point_skyscan result=0 07:29:38 Check angles 07:29:38 SkyScan query 07:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 07:29:38 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 07:29:38 Check angles 07:29:38 SkyScan query 07:29:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 07:29:39 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 07:29:39 Check angles 07:29:39 SkyScan query 07:29:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 07:29:40 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 07:29:40 Check angles 07:29:40 SkyScan query 07:29:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.245<-17283 Statuses=0008 0009 07:29:41 Msec=2250 True Az=112.995 Ze=-79.245 Az status=0008 Ze status=0009 07:29:41 Check angles 07:29:41 SkyScan query 07:29:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.855<-15857 Statuses=0008 0009 07:29:41 Msec=3000 True Az=112.995 Ze=-57.855 Az status=0008 Ze status=0009 07:29:41 Check angles 07:29:41 SkyScan query 07:29:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.915<-14461 Statuses=0008 0009 07:29:42 Msec=3750 True Az=112.995 Ze=-36.915 Az status=0008 Ze status=0009 07:29:42 Check angles 07:29:42 SkyScan query 07:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.51<-13034 Statuses=0008 0009 07:29:43 Msec=4500 True Az=112.995 Ze=-15.51 Az status=0008 Ze status=0009 07:29:43 Check angles 07:29:43 SkyScan query 07:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=5.385<-11641 Statuses=0008 0009 07:29:44 Msec=5250 True Az=112.995 Ze=5.385 Az status=0008 Ze status=0009 07:29:44 Check angles 07:29:44 SkyScan query 07:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:29:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:29:44 Message to Master queued w/err=0: serial=80472 error=0 07:29:49 Received message from Master: op=Filter serial=80473 07:29:49 Color wheel filter change from 0 to 0 07:29:49 FLIGetFilterPos err=0 currentPosition=0 07:29:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:49 Filter is already there-color wheel unchanged 07:29:49 Received message from Master: op=Shutter serial=80474 07:29:49 Shutter LASER close 07:29:50 Received message from Camera: op=State serial=80476 07:29:50 GetSingleValue result=40 Value=cccccccc 07:29:50 SkyScan query 07:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:29:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:50 Parameters OK 07:29:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:50 Set A/D data flow result=40 07:29:50 Set A/D channel type result=40 07:29:50 Set A/D encoding result=40 07:29:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:50 Set channel filter=0.000000e+000 result=40 07:29:50 Config A/D Result=40 07:29:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:50 Get A/D filter: -9.255963e+061 result=40 07:29:50 Get A/D value=-858993460 result=40 07:29:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:50 Parameters OK 07:29:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:50 Set A/D data flow result=40 07:29:50 Set A/D channel type result=40 07:29:50 Set A/D encoding result=40 07:29:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:50 Set channel filter=0.000000e+000 result=40 07:29:50 Config A/D Result=40 07:29:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:50 Get A/D filter: -9.255963e+061 result=40 07:29:50 Get A/D value=-858993460 result=40 07:29:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:50 Aux= 07:29:50 Message to Camera, serial 80476 queued 07:30:27 Received message from Master: op=PointingHead serial=80489 07:30:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:30:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:30:27 Point started: ret=0 07:30:27 point_skyscan result=0 07:30:28 Check angles 07:30:28 SkyScan query 07:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:30:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:30:29 Message to Master queued w/err=0: serial=80489 error=0 07:30:34 Received message from Master: op=Filter serial=80490 07:30:34 Color wheel filter change from 0 to 0 07:30:34 FLIGetFilterPos err=0 currentPosition=0 07:30:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:34 Filter is already there-color wheel unchanged 07:30:34 Received message from Master: op=Shutter serial=80491 07:30:34 Shutter LASER close 07:30:34 Received message from Camera: op=State serial=80493 07:30:34 GetSingleValue result=40 Value=cccccccc 07:30:34 SkyScan query 07:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:30:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:35 Parameters OK 07:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:35 Set A/D data flow result=40 07:30:35 Set A/D channel type result=40 07:30:35 Set A/D encoding result=40 07:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:35 Set channel filter=0.000000e+000 result=40 07:30:35 Config A/D Result=40 07:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:35 Get A/D filter: -9.255963e+061 result=40 07:30:35 Get A/D value=-858993460 result=40 07:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:35 Parameters OK 07:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:35 Set A/D data flow result=40 07:30:35 Set A/D channel type result=40 07:30:35 Set A/D encoding result=40 07:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:35 Set channel filter=0.000000e+000 result=40 07:30:35 Config A/D Result=40 07:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:35 Get A/D filter: -9.255963e+061 result=40 07:30:35 Get A/D value=-858993460 result=40 07:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:35 Aux= 07:30:35 Message to Camera, serial 80493 queued 07:31:10 Received message from Master: op=PointingHead serial=80505 07:31:10 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:31:10 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:31:11 Point started: ret=0 07:31:11 point_skyscan result=0 07:31:12 Check angles 07:31:12 SkyScan query 07:31:12 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 07:31:12 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 07:31:12 Check angles 07:31:12 SkyScan query 07:31:13 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.495<-12433 Statuses=0009 0008 07:31:13 Msec=750 True Az=153.285 Ze=-6.495 Az status=0009 Ze status=0008 07:31:13 Check angles 07:31:13 SkyScan query 07:31:14 SkyScan query done: ret=0 az=170.775<-11385 ze=-6.495<-12433 Statuses=0009 0008 07:31:14 Msec=1500 True Az=170.775 Ze=-6.495 Az status=0009 Ze status=0008 07:31:14 Check angles 07:31:14 SkyScan query 07:31:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:31:14 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:31:14 Message to Master queued w/err=0: serial=80505 error=0 07:31:19 Received message from Master: op=Filter serial=80506 07:31:19 Color wheel filter change from 0 to 0 07:31:19 FLIGetFilterPos err=0 currentPosition=0 07:31:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:19 Filter is already there-color wheel unchanged 07:31:20 Received message from Master: op=Shutter serial=80507 07:31:20 Shutter LASER close 07:31:20 Received message from Camera: op=State serial=80509 07:31:20 GetSingleValue result=40 Value=cccccccc 07:31:20 SkyScan query 07:31:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:31:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:20 Parameters OK 07:31:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:20 Set A/D data flow result=40 07:31:20 Set A/D channel type result=40 07:31:20 Set A/D encoding result=40 07:31:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:20 Set channel filter=0.000000e+000 result=40 07:31:20 Config A/D Result=40 07:31:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:20 Get A/D filter: -9.255963e+061 result=40 07:31:20 Get A/D value=-858993460 result=40 07:31:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:20 Parameters OK 07:31:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:20 Set A/D data flow result=40 07:31:20 Set A/D channel type result=40 07:31:20 Set A/D encoding result=40 07:31:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:20 Set channel filter=0.000000e+000 result=40 07:31:20 Config A/D Result=40 07:31:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:20 Get A/D filter: -9.255963e+061 result=40 07:31:20 Get A/D value=-858993460 result=40 07:31:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:20 Aux= 07:31:20 Message to Camera, serial 80509 queued 07:31:57 Received message from Master: op=PointingHead serial=80522 07:31:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:31:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:31:57 Point started: ret=0 07:31:57 point_skyscan result=0 07:31:58 Check angles 07:31:58 SkyScan query 07:31:59 SkyScan query done: ret=0 az=153.09<-10206 ze=6.51<-11566 Statuses=0009 0008 07:31:59 Msec=0 True Az=153.09 Ze=6.51 Az status=0009 Ze status=0008 07:31:59 Check angles 07:31:59 SkyScan query 07:31:59 SkyScan query done: ret=0 az=135.615<-9041 ze=6.495<-11567 Statuses=0009 0008 07:31:59 Msec=750 True Az=135.615 Ze=6.495 Az status=0009 Ze status=0008 07:32:00 Check angles 07:32:00 SkyScan query 07:32:00 SkyScan query done: ret=0 az=118.11<-7874 ze=6.495<-11567 Statuses=0009 0008 07:32:00 Msec=1500 True Az=118.11 Ze=6.495 Az status=0009 Ze status=0008 07:32:00 Check angles 07:32:00 SkyScan query 07:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:32:01 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:32:01 Message to Master queued w/err=0: serial=80522 error=0 07:32:06 Received message from Master: op=Filter serial=80523 07:32:06 Color wheel filter change from 0 to 0 07:32:06 FLIGetFilterPos err=0 currentPosition=0 07:32:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:06 Filter is already there-color wheel unchanged 07:32:06 Received message from Master: op=Shutter serial=80524 07:32:06 Shutter LASER close 07:32:06 Received message from Camera: op=State serial=80526 07:32:06 GetSingleValue result=40 Value=cccccccc 07:32:06 SkyScan query 07:32:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:32:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:07 Parameters OK 07:32:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:07 Set A/D data flow result=40 07:32:07 Set A/D channel type result=40 07:32:07 Set A/D encoding result=40 07:32:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:07 Set channel filter=0.000000e+000 result=40 07:32:07 Config A/D Result=40 07:32:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:07 Get A/D filter: -9.255963e+061 result=40 07:32:07 Get A/D value=-858993460 result=40 07:32:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:07 Parameters OK 07:32:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:07 Set A/D data flow result=40 07:32:07 Set A/D channel type result=40 07:32:07 Set A/D encoding result=40 07:32:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:07 Set channel filter=0.000000e+000 result=40 07:32:07 Config A/D Result=40 07:32:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:07 Get A/D filter: -9.255963e+061 result=40 07:32:07 Get A/D value=-858993460 result=40 07:32:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:07 Aux= 07:32:07 Message to Camera, serial 80526 queued 07:32:44 Received message from Master: op=PointingHead serial=80539 07:32:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:32:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:32:44 Point started: ret=0 07:32:44 point_skyscan result=0 07:32:45 Check angles 07:32:45 SkyScan query 07:32:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 07:32:45 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 07:32:45 Check angles 07:32:45 SkyScan query 07:32:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.775<-14985 Statuses=0008 0009 07:32:46 Msec=750 True Az=112.995 Ze=-44.775 Az status=0008 Ze status=0009 07:32:46 Check angles 07:32:46 SkyScan query 07:32:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 07:32:47 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 07:32:47 Check angles 07:32:47 SkyScan query 07:32:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 07:32:47 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 07:32:48 Check angles 07:32:48 SkyScan query 07:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 07:32:48 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 07:32:48 Check angles 07:32:48 SkyScan query 07:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 07:32:49 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 07:32:49 Check angles 07:32:49 SkyScan query 07:32:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.97<-21998 Statuses=0008 0009 07:32:50 Msec=4500 True Az=112.995 Ze=-149.97 Az status=0008 Ze status=0009 07:32:50 Check angles 07:32:50 SkyScan query 07:32:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0008 0009 07:32:51 Msec=5250 True Az=112.995 Ze=-171.18 Az status=0008 Ze status=0009 07:32:51 Check angles 07:32:51 SkyScan query 07:32:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:32:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:32:51 Message to Master queued w/err=0: serial=80539 error=0 07:32:56 Received message from Master: op=Filter serial=80540 07:32:56 Color wheel filter change from 0 to 0 07:32:56 FLIGetFilterPos err=0 currentPosition=0 07:32:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:56 Filter is already there-color wheel unchanged 07:32:56 Received message from Master: op=Shutter serial=80541 07:32:56 Shutter LASER open 07:32:57 Received message from Camera: op=State serial=80543 07:32:57 GetSingleValue result=40 Value=cccccccc 07:32:57 SkyScan query 07:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:32:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:57 Parameters OK 07:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:57 Set A/D data flow result=40 07:32:57 Set A/D channel type result=40 07:32:57 Set A/D encoding result=40 07:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:57 Set channel filter=0.000000e+000 result=40 07:32:57 Config A/D Result=40 07:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:57 Get A/D filter: -9.255963e+061 result=40 07:32:57 Get A/D value=-858993460 result=40 07:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:57 Parameters OK 07:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:57 Set A/D data flow result=40 07:32:57 Set A/D channel type result=40 07:32:57 Set A/D encoding result=40 07:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:57 Set channel filter=0.000000e+000 result=40 07:32:57 Config A/D Result=40 07:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:57 Get A/D filter: -9.255963e+061 result=40 07:32:57 Get A/D value=-858993460 result=40 07:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:57 Aux= 07:32:57 Message to Camera, serial 80543 queued 07:33:06 Received message from Master: op=Shutter serial=80553 07:33:06 Shutter LASER close 07:33:06 Received message from Master: op=PointingHead serial=80557 07:33:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:33:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:33:06 Point started: ret=0 07:33:06 point_skyscan result=0 07:33:07 Check angles 07:33:07 SkyScan query 07:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 07:33:08 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 07:33:08 Check angles 07:33:08 SkyScan query 07:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 07:33:08 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 07:33:09 Check angles 07:33:09 SkyScan query 07:33:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 07:33:09 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 07:33:09 Check angles 07:33:09 SkyScan query 07:33:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 07:33:10 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 07:33:10 Check angles 07:33:10 SkyScan query 07:33:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.785<-15919 Statuses=0008 0009 07:33:11 Msec=3000 True Az=112.995 Ze=-58.785 Az status=0008 Ze status=0009 07:33:11 Check angles 07:33:11 SkyScan query 07:33:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.815<-14521 Statuses=0008 0009 07:33:11 Msec=3750 True Az=112.995 Ze=-37.815 Az status=0008 Ze status=0009 07:33:12 Check angles 07:33:12 SkyScan query 07:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 07:33:12 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 07:33:12 Check angles 07:33:12 SkyScan query 07:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.44<-11704 Statuses=0008 0009 07:33:13 Msec=5250 True Az=112.995 Ze=4.44 Az status=0008 Ze status=0009 07:33:13 Check angles 07:33:13 SkyScan query 07:33:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:33:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:33:14 Message to Master queued w/err=0: serial=80557 error=0 07:33:19 Received message from Master: op=Filter serial=80558 07:33:19 Color wheel filter change from 0 to 0 07:33:19 FLIGetFilterPos err=0 currentPosition=0 07:33:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:19 Filter is already there-color wheel unchanged 07:33:19 Received message from Master: op=Shutter serial=80559 07:33:19 Shutter LASER close 07:33:19 Received message from Camera: op=State serial=80561 07:33:19 GetSingleValue result=40 Value=cccccccc 07:33:19 SkyScan query 07:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:33:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:20 Parameters OK 07:33:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:20 Set A/D data flow result=40 07:33:20 Set A/D channel type result=40 07:33:20 Set A/D encoding result=40 07:33:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:20 Set channel filter=0.000000e+000 result=40 07:33:20 Config A/D Result=40 07:33:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:20 Get A/D filter: -9.255963e+061 result=40 07:33:20 Get A/D value=-858993460 result=40 07:33:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:20 Parameters OK 07:33:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:20 Set A/D data flow result=40 07:33:20 Set A/D channel type result=40 07:33:20 Set A/D encoding result=40 07:33:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:20 Set channel filter=0.000000e+000 result=40 07:33:20 Config A/D Result=40 07:33:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:20 Get A/D filter: -9.255963e+061 result=40 07:33:20 Get A/D value=-858993460 result=40 07:33:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:20 Aux= 07:33:20 Message to Camera, serial 80561 queued 07:33:38 Received message from Master: op=Identify serial=80562 07:33:57 Received message from Master: op=PointingHead serial=80577 07:33:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:33:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:33:57 Point started: ret=0 07:33:57 point_skyscan result=0 07:33:58 Check angles 07:33:58 SkyScan query 07:33:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:33:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:33:58 Message to Master queued w/err=0: serial=80577 error=0 07:34:03 Received message from Master: op=Filter serial=80578 07:34:03 Color wheel filter change from 0 to 0 07:34:03 FLIGetFilterPos err=0 currentPosition=0 07:34:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:03 Filter is already there-color wheel unchanged 07:34:03 Received message from Master: op=Shutter serial=80579 07:34:03 Shutter LASER close 07:34:03 Received message from Camera: op=State serial=80581 07:34:03 GetSingleValue result=40 Value=cccccccc 07:34:03 SkyScan query 07:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:34:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:04 Parameters OK 07:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:04 Set A/D data flow result=40 07:34:04 Set A/D channel type result=40 07:34:04 Set A/D encoding result=40 07:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:04 Set channel filter=0.000000e+000 result=40 07:34:04 Config A/D Result=40 07:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:04 Get A/D filter: -9.255963e+061 result=40 07:34:04 Get A/D value=-858993460 result=40 07:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:04 Parameters OK 07:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:04 Set A/D data flow result=40 [UTC 2019-3-3 07:34:04] 07:34:04 Set A/D channel type result=40 07:34:04 Set A/D encoding result=40 07:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:04 Set channel filter=0.000000e+000 result=40 07:34:04 Config A/D Result=40 07:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:04 Get A/D filter: -9.255963e+061 result=40 07:34:04 Get A/D value=-858993460 result=40 07:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:04 Aux= 07:34:04 Message to Camera, serial 80581 queued 07:34:41 Received message from Master: op=PointingHead serial=80594 07:34:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:34:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:34:41 Point started: ret=0 07:34:41 point_skyscan result=0 07:34:42 Check angles 07:34:42 SkyScan query 07:34:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:34:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:34:43 Message to Master queued w/err=0: serial=80594 error=0 07:34:48 Received message from Master: op=Filter serial=80595 07:34:48 Color wheel filter change from 0 to 0 07:34:48 FLIGetFilterPos err=0 currentPosition=0 07:34:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:48 Filter is already there-color wheel unchanged 07:34:48 Received message from Master: op=Shutter serial=80596 07:34:48 Shutter LASER close 07:34:48 Received message from Camera: op=State serial=80598 07:34:48 GetSingleValue result=40 Value=cccccccc 07:34:48 SkyScan query 07:34:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:34:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:48 Parameters OK 07:34:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:48 Set A/D data flow result=40 07:34:48 Set A/D channel type result=40 07:34:48 Set A/D encoding result=40 07:34:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:48 Set channel filter=0.000000e+000 result=40 07:34:48 Config A/D Result=40 07:34:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:48 Get A/D filter: -9.255963e+061 result=40 07:34:48 Get A/D value=-858993460 result=40 07:34:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:48 Parameters OK 07:34:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:48 Set A/D data flow result=40 07:34:48 Set A/D channel type result=40 07:34:48 Set A/D encoding result=40 07:34:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:48 Set channel filter=0.000000e+000 result=40 07:34:48 Config A/D Result=40 07:34:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:48 Get A/D filter: -9.255963e+061 result=40 07:34:48 Get A/D value=-858993460 result=40 07:34:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:48 Aux= 07:34:48 Message to Camera, serial 80598 queued 07:35:25 Received message from Master: op=PointingHead serial=80611 07:35:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:35:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:35:25 Point started: ret=0 07:35:25 point_skyscan result=0 07:35:26 Check angles 07:35:26 SkyScan query 07:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:35:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:35:27 Message to Master queued w/err=0: serial=80611 error=0 07:35:32 Received message from Master: op=Filter serial=80612 07:35:32 Color wheel filter change from 0 to 0 07:35:32 FLIGetFilterPos err=0 currentPosition=0 07:35:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:32 Filter is already there-color wheel unchanged 07:35:32 Received message from Master: op=Shutter serial=80613 07:35:32 Shutter LASER close 07:35:32 Received message from Camera: op=State serial=80615 07:35:32 GetSingleValue result=40 Value=cccccccc 07:35:32 SkyScan query 07:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:35:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:33 Parameters OK 07:35:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:33 Set A/D data flow result=40 07:35:33 Set A/D channel type result=40 07:35:33 Set A/D encoding result=40 07:35:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:33 Set channel filter=0.000000e+000 result=40 07:35:33 Config A/D Result=40 07:35:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:33 Get A/D filter: -9.255963e+061 result=40 07:35:33 Get A/D value=-858993460 result=40 07:35:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:33 Parameters OK 07:35:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:33 Set A/D data flow result=40 07:35:33 Set A/D channel type result=40 07:35:33 Set A/D encoding result=40 07:35:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:33 Set channel filter=0.000000e+000 result=40 07:35:33 Config A/D Result=40 07:35:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:33 Get A/D filter: -9.255963e+061 result=40 07:35:33 Get A/D value=-858993460 result=40 07:35:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:33 Aux= 07:35:33 Message to Camera, serial 80615 queued 07:36:10 Received message from Master: op=PointingHead serial=80628 07:36:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:36:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:36:10 Point started: ret=0 07:36:10 point_skyscan result=0 07:36:11 Check angles 07:36:11 SkyScan query 07:36:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 07:36:11 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 07:36:11 Check angles 07:36:11 SkyScan query 07:36:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.15<-15010 Statuses=0008 0009 07:36:12 Msec=750 True Az=112.995 Ze=-45.15 Az status=0008 Ze status=0009 07:36:12 Check angles 07:36:12 SkyScan query 07:36:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.105<-16407 Statuses=0008 0009 07:36:13 Msec=1500 True Az=112.995 Ze=-66.105 Az status=0008 Ze status=0009 07:36:13 Check angles 07:36:13 SkyScan query 07:36:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 07:36:13 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 07:36:14 Check angles 07:36:14 SkyScan query 07:36:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.015<-19201 Statuses=0008 0009 07:36:14 Msec=3000 True Az=112.995 Ze=-108.015 Az status=0008 Ze status=0009 07:36:14 Check angles 07:36:14 SkyScan query 07:36:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 07:36:15 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 07:36:15 Check angles 07:36:15 SkyScan query 07:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.91<-21994 Statuses=0008 0009 07:36:16 Msec=4500 True Az=112.995 Ze=-149.91 Az status=0008 Ze status=0009 07:36:16 Check angles 07:36:16 SkyScan query 07:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.79<-23386 Statuses=0008 0009 07:36:16 Msec=5250 True Az=112.995 Ze=-170.79 Az status=0008 Ze status=0009 07:36:17 Check angles 07:36:17 SkyScan query 07:36:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:36:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:36:17 Message to Master queued w/err=0: serial=80628 error=0 07:36:22 Received message from Master: op=Filter serial=80629 07:36:22 Color wheel filter change from 0 to 0 07:36:22 FLIGetFilterPos err=0 currentPosition=0 07:36:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:22 Filter is already there-color wheel unchanged 07:36:22 Received message from Master: op=Shutter serial=80630 07:36:22 Shutter LASER open 07:36:23 Received message from Camera: op=State serial=80632 07:36:23 GetSingleValue result=40 Value=cccccccc 07:36:23 SkyScan query 07:36:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:36:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:23 Parameters OK 07:36:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:23 Set A/D data flow result=40 07:36:23 Set A/D channel type result=40 07:36:23 Set A/D encoding result=40 07:36:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:23 Set channel filter=0.000000e+000 result=40 07:36:23 Config A/D Result=40 07:36:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:23 Get A/D filter: -9.255963e+061 result=40 07:36:23 Get A/D value=-858993460 result=40 07:36:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:23 Parameters OK 07:36:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:23 Set A/D data flow result=40 07:36:23 Set A/D channel type result=40 07:36:23 Set A/D encoding result=40 07:36:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:23 Set channel filter=0.000000e+000 result=40 07:36:23 Config A/D Result=40 07:36:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:23 Get A/D filter: -9.255963e+061 result=40 07:36:23 Get A/D value=-858993460 result=40 07:36:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:23 Aux= 07:36:23 Message to Camera, serial 80632 queued 07:36:32 Received message from Master: op=Shutter serial=80642 07:36:32 Shutter LASER close 07:36:32 Received message from Master: op=PointingHead serial=80646 07:36:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:36:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:36:33 Point started: ret=0 07:36:33 point_skyscan result=0 07:36:33 Check angles 07:36:33 SkyScan query 07:36:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 07:36:34 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 07:36:34 Check angles 07:36:34 SkyScan query 07:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 07:36:35 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 07:36:35 Check angles 07:36:35 SkyScan query 07:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 07:36:35 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 07:36:36 Check angles 07:36:36 SkyScan query 07:36:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.725<-17315 Statuses=0008 0009 07:36:36 Msec=2250 True Az=112.995 Ze=-79.725 Az status=0008 Ze status=0009 07:36:36 Check angles 07:36:36 SkyScan query 07:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.305<-15887 Statuses=0008 0009 07:36:37 Msec=3000 True Az=112.995 Ze=-58.305 Az status=0008 Ze status=0009 07:36:37 Check angles 07:36:37 SkyScan query 07:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.38<-14492 Statuses=0008 0009 07:36:38 Msec=3750 True Az=112.995 Ze=-37.38 Az status=0008 Ze status=0009 07:36:38 Check angles 07:36:38 SkyScan query 07:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.96<-13064 Statuses=0008 0009 07:36:38 Msec=4500 True Az=112.995 Ze=-15.96 Az status=0008 Ze status=0009 07:36:39 Check angles 07:36:39 SkyScan query 07:36:39 SkyScan query done: ret=0 az=112.995<-7533 ze=5.1<-11660 Statuses=0008 0009 07:36:39 Msec=5250 True Az=112.995 Ze=5.1 Az status=0008 Ze status=0009 07:36:39 Check angles 07:36:39 SkyScan query 07:36:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:36:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:36:40 Message to Master queued w/err=0: serial=80646 error=0 07:36:45 Received message from Master: op=Filter serial=80647 07:36:45 Color wheel filter change from 0 to 0 07:36:45 FLIGetFilterPos err=0 currentPosition=0 07:36:45 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:45 Filter is already there-color wheel unchanged 07:36:45 Received message from Master: op=Shutter serial=80648 07:36:45 Shutter LASER close 07:36:45 Received message from Camera: op=State serial=80650 07:36:45 GetSingleValue result=40 Value=cccccccc 07:36:45 SkyScan query 07:36:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:36:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:46 Parameters OK 07:36:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:46 Set A/D data flow result=40 07:36:46 Set A/D channel type result=40 07:36:46 Set A/D encoding result=40 07:36:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:46 Set channel filter=0.000000e+000 result=40 07:36:46 Config A/D Result=40 07:36:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:46 Get A/D filter: -9.255963e+061 result=40 07:36:46 Get A/D value=-858993460 result=40 07:36:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:46 Parameters OK 07:36:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:46 Set A/D data flow result=40 07:36:46 Set A/D channel type result=40 07:36:46 Set A/D encoding result=40 07:36:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:46 Set channel filter=0.000000e+000 result=40 07:36:46 Config A/D Result=40 07:36:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:46 Get A/D filter: -9.255963e+061 result=40 07:36:46 Get A/D value=-858993460 result=40 07:36:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:46 Aux= 07:36:46 Message to Camera, serial 80650 queued 07:37:23 Received message from Master: op=PointingHead serial=80663 07:37:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:37:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:37:23 Point started: ret=0 07:37:23 point_skyscan result=0 07:37:24 Check angles 07:37:24 SkyScan query 07:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:37:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:37:24 Message to Master queued w/err=0: serial=80663 error=0 07:37:29 Received message from Master: op=Filter serial=80664 07:37:29 Color wheel filter change from 0 to 0 07:37:29 FLIGetFilterPos err=0 currentPosition=0 07:37:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:29 Filter is already there-color wheel unchanged 07:37:30 Received message from Master: op=Shutter serial=80665 07:37:30 Shutter LASER close 07:37:30 Received message from Camera: op=State serial=80667 07:37:30 GetSingleValue result=40 Value=cccccccc 07:37:30 SkyScan query 07:37:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:37:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:30 Parameters OK 07:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:30 Set A/D data flow result=40 07:37:30 Set A/D channel type result=40 07:37:30 Set A/D encoding result=40 07:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:30 Set channel filter=0.000000e+000 result=40 07:37:30 Config A/D Result=40 07:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:30 Get A/D filter: -9.255963e+061 result=40 07:37:30 Get A/D value=-858993460 result=40 07:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:30 Parameters OK 07:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:30 Set A/D data flow result=40 07:37:30 Set A/D channel type result=40 07:37:30 Set A/D encoding result=40 07:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:30 Set channel filter=0.000000e+000 result=40 07:37:30 Config A/D Result=40 07:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:30 Get A/D filter: -9.255963e+061 result=40 07:37:30 Get A/D value=-858993460 result=40 07:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:30 Aux= 07:37:30 Message to Camera, serial 80667 queued 07:38:07 Received message from Master: op=PointingHead serial=80680 07:38:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:38:07 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:38:07 Point started: ret=0 07:38:07 point_skyscan result=0 07:38:08 Check angles 07:38:08 SkyScan query 07:38:09 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 07:38:09 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 07:38:09 Check angles 07:38:09 SkyScan query 07:38:09 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.495<-12433 Statuses=0009 0008 07:38:09 Msec=750 True Az=153.735 Ze=-6.495 Az status=0009 Ze status=0008 07:38:10 Check angles 07:38:10 SkyScan query 07:38:10 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 07:38:10 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 07:38:10 Check angles 07:38:10 SkyScan query 07:38:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:38:11 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:38:11 Message to Master queued w/err=0: serial=80680 error=0 07:38:16 Received message from Master: op=Filter serial=80681 07:38:16 Color wheel filter change from 0 to 0 07:38:16 FLIGetFilterPos err=0 currentPosition=0 07:38:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:16 Filter is already there-color wheel unchanged 07:38:16 Received message from Master: op=Shutter serial=80682 07:38:16 Shutter LASER close 07:38:16 Received message from Camera: op=State serial=80684 07:38:16 GetSingleValue result=40 Value=cccccccc 07:38:16 SkyScan query 07:38:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:38:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:17 Parameters OK 07:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:17 Set A/D data flow result=40 07:38:17 Set A/D channel type result=40 07:38:17 Set A/D encoding result=40 07:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:17 Set channel filter=0.000000e+000 result=40 07:38:17 Config A/D Result=40 07:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:17 Get A/D filter: -9.255963e+061 result=40 07:38:17 Get A/D value=-858993460 result=40 07:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:17 Parameters OK 07:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:17 Set A/D data flow result=40 07:38:17 Set A/D channel type result=40 07:38:17 Set A/D encoding result=40 07:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:17 Set channel filter=0.000000e+000 result=40 07:38:17 Config A/D Result=40 07:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:17 Get A/D filter: -9.255963e+061 result=40 07:38:17 Get A/D value=-858993460 result=40 07:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:17 Aux= 07:38:17 Message to Camera, serial 80684 queued 07:38:54 Received message from Master: op=PointingHead serial=80697 07:38:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:38:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:38:54 Point started: ret=0 07:38:54 point_skyscan result=0 07:38:55 Check angles 07:38:55 SkyScan query 07:38:55 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 07:38:55 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 07:38:55 Check angles 07:38:55 SkyScan query 07:38:56 SkyScan query done: ret=0 az=135.525<-9035 ze=6.495<-11567 Statuses=0009 0008 07:38:56 Msec=750 True Az=135.525 Ze=6.495 Az status=0009 Ze status=0008 07:38:56 Check angles 07:38:56 SkyScan query 07:38:57 SkyScan query done: ret=0 az=118.095<-7873 ze=6.495<-11567 Statuses=0009 0008 07:38:57 Msec=1500 True Az=118.095 Ze=6.495 Az status=0009 Ze status=0008 07:38:57 Check angles 07:38:57 SkyScan query 07:38:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:38:58 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:38:58 Message to Master queued w/err=0: serial=80697 error=0 07:39:03 Received message from Master: op=Filter serial=80698 07:39:03 Color wheel filter change from 0 to 0 07:39:03 FLIGetFilterPos err=0 currentPosition=0 07:39:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:03 Filter is already there-color wheel unchanged 07:39:03 Received message from Master: op=Shutter serial=80699 07:39:03 Shutter LASER close 07:39:03 Received message from Camera: op=State serial=80701 07:39:03 GetSingleValue result=40 Value=cccccccc 07:39:03 SkyScan query 07:39:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:39:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:03 Parameters OK 07:39:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:03 Set A/D data flow result=40 07:39:03 Set A/D channel type result=40 07:39:03 Set A/D encoding result=40 07:39:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:03 Set channel filter=0.000000e+000 result=40 07:39:03 Config A/D Result=40 07:39:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:03 Get A/D filter: -9.255963e+061 result=40 07:39:03 Get A/D value=-858993460 result=40 07:39:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:03 Parameters OK 07:39:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:03 Set A/D data flow result=40 07:39:03 Set A/D channel type result=40 07:39:03 Set A/D encoding result=40 07:39:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:03 Set channel filter=0.000000e+000 result=40 07:39:03 Config A/D Result=40 07:39:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:03 Get A/D filter: -9.255963e+061 result=40 07:39:03 Get A/D value=-858993460 result=40 07:39:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:03 Aux= 07:39:03 Message to Camera, serial 80701 queued 07:39:40 Received message from Master: op=PointingHead serial=80714 07:39:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:39:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:39:40 Point started: ret=0 07:39:40 point_skyscan result=0 07:39:41 Check angles 07:39:41 SkyScan query 07:39:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 07:39:42 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 07:39:42 Check angles 07:39:42 SkyScan query 07:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.16<-14944 Statuses=0008 0009 07:39:43 Msec=750 True Az=112.995 Ze=-44.16 Az status=0008 Ze status=0009 07:39:43 Check angles 07:39:43 SkyScan query 07:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 07:39:43 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 07:39:43 Check angles 07:39:43 SkyScan query 07:39:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.085<-17739 Statuses=0008 0009 07:39:44 Msec=2250 True Az=112.995 Ze=-86.085 Az status=0008 Ze status=0009 07:39:44 Check angles 07:39:44 SkyScan query 07:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.98<-19132 Statuses=0008 0009 07:39:45 Msec=3000 True Az=112.995 Ze=-106.98 Az status=0008 Ze status=0009 07:39:45 Check angles 07:39:45 SkyScan query 07:39:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.95<-20530 Statuses=0008 0009 07:39:46 Msec=3750 True Az=112.995 Ze=-127.95 Az status=0008 Ze status=0009 07:39:46 Check angles 07:39:46 SkyScan query 07:39:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.875<-21925 Statuses=0008 0009 07:39:46 Msec=4500 True Az=112.995 Ze=-148.875 Az status=0008 Ze status=0009 07:39:46 Check angles 07:39:46 SkyScan query 07:39:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.83<-23322 Statuses=0008 0009 07:39:47 Msec=5250 True Az=112.995 Ze=-169.83 Az status=0008 Ze status=0009 07:39:47 Check angles 07:39:47 SkyScan query 07:39:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:39:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:39:48 Message to Master queued w/err=0: serial=80714 error=0 07:39:53 Received message from Master: op=Filter serial=80715 07:39:53 Color wheel filter change from 0 to 0 07:39:53 FLIGetFilterPos err=0 currentPosition=0 07:39:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:53 Filter is already there-color wheel unchanged 07:39:53 Received message from Master: op=Shutter serial=80716 07:39:53 Shutter LASER open 07:39:53 Received message from Camera: op=State serial=80718 07:39:53 GetSingleValue result=40 Value=cccccccc 07:39:53 SkyScan query 07:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:39:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:54 Parameters OK 07:39:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:54 Set A/D data flow result=40 07:39:54 Set A/D channel type result=40 07:39:54 Set A/D encoding result=40 07:39:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:54 Set channel filter=0.000000e+000 result=40 07:39:54 Config A/D Result=40 07:39:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:54 Get A/D filter: -9.255963e+061 result=40 07:39:54 Get A/D value=-858993460 result=40 07:39:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:54 Parameters OK 07:39:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:54 Set A/D data flow result=40 07:39:54 Set A/D channel type result=40 07:39:54 Set A/D encoding result=40 07:39:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:54 Set channel filter=0.000000e+000 result=40 07:39:54 Config A/D Result=40 07:39:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:54 Get A/D filter: -9.255963e+061 result=40 07:39:54 Get A/D value=-858993460 result=40 07:39:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:54 Aux= 07:39:54 Message to Camera, serial 80718 queued 07:40:02 Received message from Master: op=Shutter serial=80728 07:40:02 Shutter LASER close 07:40:03 Received message from Master: op=PointingHead serial=80732 07:40:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:40:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:40:03 Point started: ret=0 07:40:03 point_skyscan result=0 07:40:04 Check angles 07:40:04 SkyScan query 07:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 07:40:04 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 07:40:05 Check angles 07:40:05 SkyScan query 07:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 07:40:05 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 07:40:05 Check angles 07:40:05 SkyScan query 07:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 07:40:06 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 07:40:06 Check angles 07:40:06 SkyScan query 07:40:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 07:40:07 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 07:40:07 Check angles 07:40:07 SkyScan query 07:40:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 07:40:07 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 07:40:08 Check angles 07:40:08 SkyScan query 07:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 07:40:08 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 07:40:08 Check angles 07:40:08 SkyScan query 07:40:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.605<-13107 Statuses=0008 0009 07:40:09 Msec=4500 True Az=112.995 Ze=-16.605 Az status=0008 Ze status=0009 07:40:09 Check angles 07:40:09 SkyScan query 07:40:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.305<-11713 Statuses=0008 0009 07:40:10 Msec=5250 True Az=112.995 Ze=4.305 Az status=0008 Ze status=0009 07:40:10 Check angles 07:40:10 SkyScan query 07:40:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:40:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:40:10 Message to Master queued w/err=0: serial=80732 error=0 07:40:15 Received message from Master: op=Filter serial=80733 07:40:15 Color wheel filter change from 0 to 0 07:40:15 FLIGetFilterPos err=0 currentPosition=0 07:40:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:15 Filter is already there-color wheel unchanged 07:40:16 Received message from Master: op=Shutter serial=80734 07:40:16 Shutter LASER close 07:40:16 Received message from Camera: op=State serial=80736 07:40:16 GetSingleValue result=40 Value=cccccccc 07:40:16 SkyScan query 07:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:40:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:16 Parameters OK 07:40:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:16 Set A/D data flow result=40 07:40:16 Set A/D channel type result=40 07:40:16 Set A/D encoding result=40 07:40:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:16 Set channel filter=0.000000e+000 result=40 07:40:16 Config A/D Result=40 07:40:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:16 Get A/D filter: -9.255963e+061 result=40 07:40:16 Get A/D value=-858993460 result=40 07:40:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:16 Parameters OK 07:40:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:16 Set A/D data flow result=40 07:40:16 Set A/D channel type result=40 07:40:16 Set A/D encoding result=40 07:40:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:16 Set channel filter=0.000000e+000 result=40 07:40:16 Config A/D Result=40 07:40:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:16 Get A/D filter: -9.255963e+061 result=40 07:40:16 Get A/D value=-858993460 result=40 07:40:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:16 Aux= 07:40:16 Message to Camera, serial 80736 queued 07:40:53 Received message from Master: op=PointingHead serial=80749 07:40:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:40:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:40:54 Point started: ret=0 07:40:54 point_skyscan result=0 07:40:54 Check angles 07:40:54 SkyScan query 07:40:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:40:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:40:55 Message to Master queued w/err=0: serial=80749 error=0 07:41:00 Received message from Master: op=Filter serial=80750 07:41:00 Color wheel filter change from 0 to 0 07:41:00 FLIGetFilterPos err=0 currentPosition=0 07:41:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:00 Filter is already there-color wheel unchanged 07:41:00 Received message from Master: op=Shutter serial=80751 07:41:00 Shutter LASER close 07:41:00 Received message from Camera: op=State serial=80753 07:41:00 GetSingleValue result=40 Value=cccccccc 07:41:00 SkyScan query 07:41:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:41:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:01 Parameters OK 07:41:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:01 Set A/D data flow result=40 07:41:01 Set A/D channel type result=40 07:41:01 Set A/D encoding result=40 07:41:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:01 Set channel filter=0.000000e+000 result=40 07:41:01 Config A/D Result=40 07:41:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:01 Get A/D filter: -9.255963e+061 result=40 07:41:01 Get A/D value=-858993460 result=40 07:41:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:01 Parameters OK 07:41:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:01 Set A/D data flow result=40 07:41:01 Set A/D channel type result=40 07:41:01 Set A/D encoding result=40 07:41:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:01 Set channel filter=0.000000e+000 result=40 07:41:01 Config A/D Result=40 07:41:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:01 Get A/D filter: -9.255963e+061 result=40 07:41:01 Get A/D value=-858993460 result=40 07:41:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:01 Aux= 07:41:01 Message to Camera, serial 80753 queued 07:41:37 Received message from Master: op=PointingHead serial=80766 07:41:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:41:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:41:38 Point started: ret=0 07:41:38 point_skyscan result=0 07:41:39 Check angles 07:41:39 SkyScan query 07:41:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:41:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:41:39 Message to Master queued w/err=0: serial=80766 error=0 07:41:44 Received message from Master: op=Filter serial=80767 07:41:44 Color wheel filter change from 0 to 0 07:41:44 FLIGetFilterPos err=0 currentPosition=0 07:41:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:44 Filter is already there-color wheel unchanged 07:41:44 Received message from Master: op=Shutter serial=80768 07:41:44 Shutter LASER close 07:41:44 Received message from Camera: op=State serial=80770 07:41:44 GetSingleValue result=40 Value=cccccccc 07:41:44 SkyScan query 07:41:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:41:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:45 Parameters OK 07:41:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:45 Set A/D data flow result=40 07:41:45 Set A/D channel type result=40 07:41:45 Set A/D encoding result=40 07:41:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:45 Set channel filter=0.000000e+000 result=40 07:41:45 Config A/D Result=40 07:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:45 Get A/D filter: -9.255963e+061 result=40 07:41:45 Get A/D value=-858993460 result=40 07:41:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:45 Parameters OK 07:41:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:45 Set A/D data flow result=40 07:41:45 Set A/D channel type result=40 07:41:45 Set A/D encoding result=40 07:41:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:45 Set channel filter=0.000000e+000 result=40 07:41:45 Config A/D Result=40 07:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:45 Get A/D filter: -9.255963e+061 result=40 07:41:45 Get A/D value=-858993460 result=40 07:41:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:45 Aux= 07:41:45 Message to Camera, serial 80770 queued 07:42:21 Received message from Master: op=PointingHead serial=80782 07:42:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:42:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:42:21 Point started: ret=0 07:42:21 point_skyscan result=0 07:42:22 Check angles 07:42:22 SkyScan query 07:42:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:42:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:42:22 Message to Master queued w/err=0: serial=80782 error=0 07:42:27 Received message from Master: op=Filter serial=80783 07:42:27 Color wheel filter change from 0 to 0 07:42:27 FLIGetFilterPos err=0 currentPosition=0 07:42:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:27 Filter is already there-color wheel unchanged 07:42:28 Received message from Master: op=Shutter serial=80784 07:42:28 Shutter LASER close 07:42:28 Received message from Camera: op=State serial=80786 07:42:28 GetSingleValue result=40 Value=cccccccc 07:42:28 SkyScan query 07:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:42:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:28 Parameters OK 07:42:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:28 Set A/D data flow result=40 07:42:28 Set A/D channel type result=40 07:42:28 Set A/D encoding result=40 07:42:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:28 Set channel filter=0.000000e+000 result=40 07:42:28 Config A/D Result=40 07:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:28 Get A/D filter: -9.255963e+061 result=40 07:42:28 Get A/D value=-858993460 result=40 07:42:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:28 Parameters OK 07:42:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:28 Set A/D data flow result=40 07:42:28 Set A/D channel type result=40 07:42:28 Set A/D encoding result=40 07:42:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:28 Set channel filter=0.000000e+000 result=40 07:42:28 Config A/D Result=40 07:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:28 Get A/D filter: -9.255963e+061 result=40 07:42:28 Get A/D value=-858993460 result=40 07:42:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:28 Aux= 07:42:28 Message to Camera, serial 80786 queued 07:43:05 Received message from Master: op=PointingHead serial=80799 07:43:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:43:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:43:05 Point started: ret=0 07:43:05 point_skyscan result=0 07:43:06 Check angles 07:43:06 SkyScan query 07:43:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 07:43:07 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 07:43:07 Check angles 07:43:07 SkyScan query 07:43:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.115<-14941 Statuses=0008 0009 07:43:07 Msec=750 True Az=112.995 Ze=-44.115 Az status=0008 Ze status=0009 07:43:08 Check angles 07:43:08 SkyScan query 07:43:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 07:43:08 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 07:43:08 Check angles 07:43:08 SkyScan query 07:43:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 07:43:09 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 07:43:09 Check angles 07:43:09 SkyScan query 07:43:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 07:43:10 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 07:43:10 Check angles 07:43:10 SkyScan query 07:43:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 07:43:10 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 07:43:11 Check angles 07:43:11 SkyScan query 07:43:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.73<-21982 Statuses=0008 0009 07:43:11 Msec=4500 True Az=112.995 Ze=-149.73 Az status=0008 Ze status=0009 07:43:11 Check angles 07:43:11 SkyScan query 07:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.655<-23377 Statuses=0008 0009 07:43:12 Msec=5250 True Az=112.995 Ze=-170.655 Az status=0008 Ze status=0009 07:43:12 Check angles 07:43:12 SkyScan query 07:43:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:43:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:43:13 Message to Master queued w/err=0: serial=80799 error=0 07:43:18 Received message from Master: op=Filter serial=80800 07:43:18 Color wheel filter change from 0 to 0 07:43:18 FLIGetFilterPos err=0 currentPosition=0 07:43:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:18 Filter is already there-color wheel unchanged 07:43:18 Received message from Master: op=Shutter serial=80801 07:43:18 Shutter LASER open 07:43:18 Received message from Camera: op=State serial=80803 07:43:18 GetSingleValue result=40 Value=cccccccc 07:43:18 SkyScan query 07:43:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:43:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:19 Parameters OK 07:43:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:19 Set A/D data flow result=40 07:43:19 Set A/D channel type result=40 07:43:19 Set A/D encoding result=40 07:43:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:19 Set channel filter=0.000000e+000 result=40 07:43:19 Config A/D Result=40 07:43:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:19 Get A/D filter: -9.255963e+061 result=40 07:43:19 Get A/D value=-858993460 result=40 07:43:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:19 Parameters OK 07:43:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:19 Set A/D data flow result=40 07:43:19 Set A/D channel type result=40 07:43:19 Set A/D encoding result=40 07:43:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:19 Set channel filter=0.000000e+000 result=40 07:43:19 Config A/D Result=40 07:43:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:19 Get A/D filter: -9.255963e+061 result=40 07:43:19 Get A/D value=-858993460 result=40 07:43:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:19 Aux= 07:43:19 Message to Camera, serial 80803 queued 07:43:27 Received message from Master: op=Shutter serial=80813 07:43:27 Shutter LASER close 07:43:28 Received message from Master: op=PointingHead serial=80817 07:43:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:43:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:43:28 Point started: ret=0 07:43:28 point_skyscan result=0 07:43:29 Check angles 07:43:29 SkyScan query 07:43:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.665<-21511 Statuses=0008 0009 07:43:29 Msec=0 True Az=112.995 Ze=-142.665 Az status=0008 Ze status=0009 07:43:30 Check angles 07:43:30 SkyScan query 07:43:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 07:43:30 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 07:43:30 Check angles 07:43:30 SkyScan query 07:43:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 07:43:31 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 07:43:31 Check angles 07:43:31 SkyScan query 07:43:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.365<-17291 Statuses=0008 0009 07:43:32 Msec=2250 True Az=112.995 Ze=-79.365 Az status=0008 Ze status=0009 07:43:32 Check angles 07:43:32 SkyScan query 07:43:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.395<-15893 Statuses=0008 0009 07:43:32 Msec=3000 True Az=112.995 Ze=-58.395 Az status=0008 Ze status=0009 07:43:33 Check angles 07:43:33 SkyScan query 07:43:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.035<-14469 Statuses=0008 0009 07:43:33 Msec=3750 True Az=112.995 Ze=-37.035 Az status=0008 Ze status=0009 07:43:33 Check angles 07:43:33 SkyScan query 07:43:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.065<-13071 Statuses=0008 0009 07:43:34 Msec=4500 True Az=112.995 Ze=-16.065 Az status=0008 Ze status=0009 07:43:34 Check angles 07:43:34 SkyScan query 07:43:35 SkyScan query done: ret=0 az=112.995<-7533 ze=4.71<-11686 Statuses=0008 0009 07:43:35 Msec=5250 True Az=112.995 Ze=4.71 Az status=0008 Ze status=0009 07:43:35 Check angles 07:43:35 SkyScan query 07:43:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:43:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:43:35 Message to Master queued w/err=0: serial=80817 error=0 07:43:40 Received message from Master: op=Filter serial=80818 07:43:40 Color wheel filter change from 0 to 0 07:43:40 FLIGetFilterPos err=0 currentPosition=0 07:43:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:40 Filter is already there-color wheel unchanged 07:43:41 Received message from Master: op=Shutter serial=80819 07:43:41 Shutter LASER close 07:43:41 Received message from Camera: op=State serial=80821 07:43:41 GetSingleValue result=40 Value=cccccccc 07:43:41 SkyScan query 07:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:43:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:41 Parameters OK 07:43:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:41 Set A/D data flow result=40 07:43:41 Set A/D channel type result=40 07:43:41 Set A/D encoding result=40 07:43:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:41 Set channel filter=0.000000e+000 result=40 07:43:41 Config A/D Result=40 07:43:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:41 Get A/D filter: -9.255963e+061 result=40 07:43:41 Get A/D value=-858993460 result=40 07:43:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:41 Parameters OK 07:43:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:41 Set A/D data flow result=40 07:43:41 Set A/D channel type result=40 07:43:41 Set A/D encoding result=40 07:43:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:41 Set channel filter=0.000000e+000 result=40 07:43:41 Config A/D Result=40 07:43:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:41 Get A/D filter: -9.255963e+061 result=40 07:43:41 Get A/D value=-858993460 result=40 07:43:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:41 Aux= 07:43:41 Message to Camera, serial 80821 queued [UTC 2019-3-3 07:43:50] 07:44:18 Received message from Master: op=PointingHead serial=80834 07:44:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:44:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:44:19 Point started: ret=0 07:44:19 point_skyscan result=0 07:44:19 Check angles 07:44:19 SkyScan query 07:44:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:44:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:44:20 Message to Master queued w/err=0: serial=80834 error=0 07:44:25 Received message from Master: op=Filter serial=80835 07:44:25 Color wheel filter change from 0 to 0 07:44:25 FLIGetFilterPos err=0 currentPosition=0 07:44:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:25 Filter is already there-color wheel unchanged 07:44:25 Received message from Master: op=Shutter serial=80836 07:44:25 Shutter LASER close 07:44:25 Received message from Camera: op=State serial=80838 07:44:25 GetSingleValue result=40 Value=cccccccc 07:44:25 SkyScan query 07:44:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:44:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:26 Parameters OK 07:44:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:26 Set A/D data flow result=40 07:44:26 Set A/D channel type result=40 07:44:26 Set A/D encoding result=40 07:44:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:26 Set channel filter=0.000000e+000 result=40 07:44:26 Config A/D Result=40 07:44:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:26 Get A/D filter: -9.255963e+061 result=40 07:44:26 Get A/D value=-858993460 result=40 07:44:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:26 Parameters OK 07:44:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:26 Set A/D data flow result=40 07:44:26 Set A/D channel type result=40 07:44:26 Set A/D encoding result=40 07:44:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:26 Set channel filter=0.000000e+000 result=40 07:44:26 Config A/D Result=40 07:44:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:26 Get A/D filter: -9.255963e+061 result=40 07:44:26 Get A/D value=-858993460 result=40 07:44:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:26 Aux= 07:44:26 Message to Camera, serial 80838 queued 07:45:02 Received message from Master: op=PointingHead serial=80850 07:45:02 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:45:02 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:45:02 Point started: ret=0 07:45:02 point_skyscan result=0 07:45:03 Check angles 07:45:03 SkyScan query 07:45:03 SkyScan query done: ret=0 az=136.44<-9096 ze=-6.51<-12434 Statuses=0009 0008 07:45:03 Msec=0 True Az=136.44 Ze=-6.51 Az status=0009 Ze status=0008 07:45:03 Check angles 07:45:03 SkyScan query 07:45:04 SkyScan query done: ret=0 az=154.065<-10271 ze=-6.495<-12433 Statuses=0009 0008 07:45:04 Msec=750 True Az=154.065 Ze=-6.495 Az status=0009 Ze status=0008 07:45:04 Check angles 07:45:04 SkyScan query 07:45:05 SkyScan query done: ret=0 az=171.75<-11450 ze=-6.495<-12433 Statuses=0009 0008 07:45:05 Msec=1500 True Az=171.75 Ze=-6.495 Az status=0009 Ze status=0008 07:45:05 Check angles 07:45:05 SkyScan query 07:45:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:45:05 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:45:05 Message to Master queued w/err=0: serial=80850 error=0 07:45:10 Received message from Master: op=Filter serial=80851 07:45:10 Color wheel filter change from 0 to 0 07:45:10 FLIGetFilterPos err=0 currentPosition=0 07:45:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:10 Filter is already there-color wheel unchanged 07:45:11 Received message from Master: op=Shutter serial=80852 07:45:11 Shutter LASER close 07:45:11 Received message from Camera: op=State serial=80854 07:45:11 GetSingleValue result=40 Value=cccccccc 07:45:11 SkyScan query 07:45:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:45:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:11 Parameters OK 07:45:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:11 Set A/D data flow result=40 07:45:11 Set A/D channel type result=40 07:45:11 Set A/D encoding result=40 07:45:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:11 Set channel filter=0.000000e+000 result=40 07:45:11 Config A/D Result=40 07:45:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:11 Get A/D filter: -9.255963e+061 result=40 07:45:11 Get A/D value=-858993460 result=40 07:45:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:11 Parameters OK 07:45:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:11 Set A/D data flow result=40 07:45:11 Set A/D channel type result=40 07:45:11 Set A/D encoding result=40 07:45:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:11 Set channel filter=0.000000e+000 result=40 07:45:11 Config A/D Result=40 07:45:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:11 Get A/D filter: -9.255963e+061 result=40 07:45:11 Get A/D value=-858993460 result=40 07:45:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:11 Aux= 07:45:11 Message to Camera, serial 80854 queued 07:45:47 Received message from Master: op=PointingHead serial=80866 07:45:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:45:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:45:47 Point started: ret=0 07:45:47 point_skyscan result=0 07:45:48 Check angles 07:45:48 SkyScan query 07:45:49 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 07:45:49 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 07:45:49 Check angles 07:45:49 SkyScan query 07:45:50 SkyScan query done: ret=0 az=135.36<-9024 ze=6.495<-11567 Statuses=0009 0008 07:45:50 Msec=750 True Az=135.36 Ze=6.495 Az status=0009 Ze status=0008 07:45:50 Check angles 07:45:50 SkyScan query 07:45:50 SkyScan query done: ret=0 az=117.87<-7858 ze=6.495<-11567 Statuses=0009 0008 07:45:50 Msec=1500 True Az=117.87 Ze=6.495 Az status=0009 Ze status=0008 07:45:50 Check angles 07:45:50 SkyScan query 07:45:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:45:51 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:45:51 Message to Master queued w/err=0: serial=80866 error=0 07:45:56 Received message from Master: op=Filter serial=80867 07:45:56 Color wheel filter change from 0 to 0 07:45:56 FLIGetFilterPos err=0 currentPosition=0 07:45:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:56 Filter is already there-color wheel unchanged 07:45:56 Received message from Master: op=Shutter serial=80868 07:45:56 Shutter LASER close 07:45:56 Received message from Camera: op=State serial=80870 07:45:56 GetSingleValue result=40 Value=cccccccc 07:45:56 SkyScan query 07:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:45:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:57 Parameters OK 07:45:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:57 Set A/D data flow result=40 07:45:57 Set A/D channel type result=40 07:45:57 Set A/D encoding result=40 07:45:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:57 Set channel filter=0.000000e+000 result=40 07:45:57 Config A/D Result=40 07:45:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:57 Get A/D filter: -9.255963e+061 result=40 07:45:57 Get A/D value=-858993460 result=40 07:45:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:57 Parameters OK 07:45:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:57 Set A/D data flow result=40 07:45:57 Set A/D channel type result=40 07:45:57 Set A/D encoding result=40 07:45:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:57 Set channel filter=0.000000e+000 result=40 07:45:57 Config A/D Result=40 07:45:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:57 Get A/D filter: -9.255963e+061 result=40 07:45:57 Get A/D value=-858993460 result=40 07:45:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:57 Aux= 07:45:57 Message to Camera, serial 80870 queued 07:46:34 Received message from Master: op=PointingHead serial=80883 07:46:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:46:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:46:34 Point started: ret=0 07:46:34 point_skyscan result=0 07:46:35 Check angles 07:46:35 SkyScan query 07:46:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 07:46:35 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 07:46:36 Check angles 07:46:36 SkyScan query 07:46:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 07:46:36 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 07:46:36 Check angles 07:46:36 SkyScan query 07:46:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.61<-16374 Statuses=0008 0009 07:46:37 Msec=1500 True Az=112.995 Ze=-65.61 Az status=0008 Ze status=0009 07:46:37 Check angles 07:46:37 SkyScan query 07:46:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.985<-17799 Statuses=0008 0009 07:46:38 Msec=2250 True Az=112.995 Ze=-86.985 Az status=0008 Ze status=0009 07:46:38 Check angles 07:46:38 SkyScan query 07:46:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.94<-19196 Statuses=0008 0009 07:46:38 Msec=3000 True Az=112.995 Ze=-107.94 Az status=0008 Ze status=0009 07:46:39 Check angles 07:46:39 SkyScan query 07:46:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.88<-20592 Statuses=0008 0009 07:46:39 Msec=3750 True Az=112.995 Ze=-128.88 Az status=0008 Ze status=0009 07:46:39 Check angles 07:46:39 SkyScan query 07:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.285<-22019 Statuses=0008 0009 07:46:40 Msec=4500 True Az=112.995 Ze=-150.285 Az status=0008 Ze status=0009 07:46:40 Check angles 07:46:40 SkyScan query 07:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.405<-23427 Statuses=0008 0009 07:46:41 Msec=5250 True Az=112.995 Ze=-171.405 Az status=0008 Ze status=0009 07:46:41 Check angles 07:46:41 SkyScan query 07:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:46:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:46:41 Message to Master queued w/err=0: serial=80883 error=0 07:46:46 Received message from Master: op=Filter serial=80884 07:46:46 Color wheel filter change from 0 to 0 07:46:46 FLIGetFilterPos err=0 currentPosition=0 07:46:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:46 Filter is already there-color wheel unchanged 07:46:47 Received message from Master: op=Shutter serial=80885 07:46:47 Shutter LASER open 07:46:47 Received message from Camera: op=State serial=80887 07:46:47 GetSingleValue result=40 Value=cccccccc 07:46:47 SkyScan query 07:46:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:46:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:47 Parameters OK 07:46:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:47 Set A/D data flow result=40 07:46:47 Set A/D channel type result=40 07:46:47 Set A/D encoding result=40 07:46:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:47 Set channel filter=0.000000e+000 result=40 07:46:47 Config A/D Result=40 07:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:47 Get A/D filter: -9.255963e+061 result=40 07:46:47 Get A/D value=-858993460 result=40 07:46:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:47 Parameters OK 07:46:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:47 Set A/D data flow result=40 07:46:47 Set A/D channel type result=40 07:46:47 Set A/D encoding result=40 07:46:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:47 Set channel filter=0.000000e+000 result=40 07:46:47 Config A/D Result=40 07:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:47 Get A/D filter: -9.255963e+061 result=40 07:46:47 Get A/D value=-858993460 result=40 07:46:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:46:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:46:47 Aux= 07:46:47 Message to Camera, serial 80887 queued 07:46:56 Received message from Master: op=Shutter serial=80897 07:46:56 Shutter LASER close 07:46:56 Received message from Master: op=PointingHead serial=80901 07:46:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:46:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:46:57 Point started: ret=0 07:46:57 point_skyscan result=0 07:46:57 Check angles 07:46:57 SkyScan query 07:46:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 07:46:58 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 07:46:58 Check angles 07:46:58 SkyScan query 07:46:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 07:46:59 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 07:46:59 Check angles 07:46:59 SkyScan query 07:46:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.95<-18730 Statuses=0008 0009 07:46:59 Msec=1500 True Az=112.995 Ze=-100.95 Az status=0008 Ze status=0009 07:47:00 Check angles 07:47:00 SkyScan query 07:47:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.995<-17333 Statuses=0008 0009 07:47:00 Msec=2250 True Az=112.995 Ze=-79.995 Az status=0008 Ze status=0009 07:47:00 Check angles 07:47:00 SkyScan query 07:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.055<-15937 Statuses=0008 0009 07:47:01 Msec=3000 True Az=112.995 Ze=-59.055 Az status=0008 Ze status=0009 07:47:01 Check angles 07:47:01 SkyScan query 07:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.055<-14537 Statuses=0008 0009 07:47:02 Msec=3750 True Az=112.995 Ze=-38.055 Az status=0008 Ze status=0009 07:47:02 Check angles 07:47:02 SkyScan query 07:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.13<-13142 Statuses=0008 0009 07:47:02 Msec=4500 True Az=112.995 Ze=-17.13 Az status=0008 Ze status=0009 07:47:03 Check angles 07:47:03 SkyScan query 07:47:03 SkyScan query done: ret=0 az=112.995<-7533 ze=4.245<-11717 Statuses=0008 0009 07:47:03 Msec=5250 True Az=112.995 Ze=4.245 Az status=0008 Ze status=0009 07:47:03 Check angles 07:47:03 SkyScan query 07:47:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:47:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:47:04 Message to Master queued w/err=0: serial=80901 error=0 07:47:09 Received message from Master: op=Filter serial=80902 07:47:09 Color wheel filter change from 0 to 0 07:47:09 FLIGetFilterPos err=0 currentPosition=0 07:47:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:09 Filter is already there-color wheel unchanged 07:47:09 Received message from Master: op=Shutter serial=80903 07:47:09 Shutter LASER close 07:47:09 Received message from Camera: op=State serial=80905 07:47:09 GetSingleValue result=40 Value=cccccccc 07:47:09 SkyScan query 07:47:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:10 Parameters OK 07:47:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:10 Set A/D data flow result=40 07:47:10 Set A/D channel type result=40 07:47:10 Set A/D encoding result=40 07:47:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:10 Set channel filter=0.000000e+000 result=40 07:47:10 Config A/D Result=40 07:47:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:10 Get A/D filter: -9.255963e+061 result=40 07:47:10 Get A/D value=-858993460 result=40 07:47:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:10 Parameters OK 07:47:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:10 Set A/D data flow result=40 07:47:10 Set A/D channel type result=40 07:47:10 Set A/D encoding result=40 07:47:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:10 Set channel filter=0.000000e+000 result=40 07:47:10 Config A/D Result=40 07:47:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:10 Get A/D filter: -9.255963e+061 result=40 07:47:10 Get A/D value=-858993460 result=40 07:47:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:10 Aux= 07:47:10 Message to Camera, serial 80905 queued 07:47:47 Received message from Master: op=PointingHead serial=80918 07:47:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:47:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:47:47 Point started: ret=0 07:47:47 point_skyscan result=0 07:47:48 Check angles 07:47:48 SkyScan query 07:47:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:47:48 Message to Master queued w/err=0: serial=80918 error=0 07:47:53 Received message from Master: op=Filter serial=80919 07:47:53 Color wheel filter change from 0 to 0 07:47:53 FLIGetFilterPos err=0 currentPosition=0 07:47:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:53 Filter is already there-color wheel unchanged 07:47:54 Received message from Master: op=Shutter serial=80920 07:47:54 Shutter LASER close 07:47:54 Received message from Camera: op=State serial=80922 07:47:54 GetSingleValue result=40 Value=cccccccc 07:47:54 SkyScan query 07:47:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:54 Parameters OK 07:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:54 Set A/D data flow result=40 07:47:54 Set A/D channel type result=40 07:47:54 Set A/D encoding result=40 07:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:54 Set channel filter=0.000000e+000 result=40 07:47:54 Config A/D Result=40 07:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:54 Get A/D filter: -9.255963e+061 result=40 07:47:54 Get A/D value=-858993460 result=40 07:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:54 Parameters OK 07:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:54 Set A/D data flow result=40 07:47:54 Set A/D channel type result=40 07:47:54 Set A/D encoding result=40 07:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:54 Set channel filter=0.000000e+000 result=40 07:47:54 Config A/D Result=40 07:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:54 Get A/D filter: -9.255963e+061 result=40 07:47:54 Get A/D value=-858993460 result=40 07:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:54 Aux= 07:47:54 Message to Camera, serial 80922 queued 07:48:31 Received message from Master: op=PointingHead serial=80935 07:48:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:48:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:48:31 Point started: ret=0 07:48:31 point_skyscan result=0 07:48:32 Check angles 07:48:32 SkyScan query 07:48:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:48:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:48:33 Message to Master queued w/err=0: serial=80935 error=0 07:48:38 Received message from Master: op=Filter serial=80936 07:48:38 Color wheel filter change from 0 to 0 07:48:38 FLIGetFilterPos err=0 currentPosition=0 07:48:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:38 Filter is already there-color wheel unchanged 07:48:38 Received message from Master: op=Shutter serial=80937 07:48:38 Shutter LASER close 07:48:38 Received message from Camera: op=State serial=80939 07:48:38 GetSingleValue result=40 Value=cccccccc 07:48:38 SkyScan query 07:48:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:48:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:38 Parameters OK 07:48:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:38 Set A/D data flow result=40 07:48:38 Set A/D channel type result=40 07:48:38 Set A/D encoding result=40 07:48:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:38 Set channel filter=0.000000e+000 result=40 07:48:38 Config A/D Result=40 07:48:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:38 Get A/D filter: -9.255963e+061 result=40 07:48:38 Get A/D value=-858993460 result=40 07:48:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:38 Parameters OK 07:48:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:38 Set A/D data flow result=40 07:48:38 Set A/D channel type result=40 07:48:38 Set A/D encoding result=40 07:48:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:38 Set channel filter=0.000000e+000 result=40 07:48:38 Config A/D Result=40 07:48:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:38 Get A/D filter: -9.255963e+061 result=40 07:48:38 Get A/D value=-858993460 result=40 07:48:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:38 Aux= 07:48:38 Message to Camera, serial 80939 queued 07:49:15 Received message from Master: op=PointingHead serial=80952 07:49:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:49:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:49:16 Point started: ret=0 07:49:16 point_skyscan result=0 07:49:16 Check angles 07:49:16 SkyScan query 07:49:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:49:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:49:17 Message to Master queued w/err=0: serial=80952 error=0 07:49:22 Received message from Master: op=Filter serial=80953 07:49:22 Color wheel filter change from 0 to 0 07:49:22 FLIGetFilterPos err=0 currentPosition=0 07:49:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:22 Filter is already there-color wheel unchanged 07:49:22 Received message from Master: op=Shutter serial=80954 07:49:22 Shutter LASER close 07:49:22 Received message from Camera: op=State serial=80956 07:49:22 GetSingleValue result=40 Value=cccccccc 07:49:22 SkyScan query 07:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:49:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:23 Parameters OK 07:49:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:23 Set A/D data flow result=40 07:49:23 Set A/D channel type result=40 07:49:23 Set A/D encoding result=40 07:49:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:23 Set channel filter=0.000000e+000 result=40 07:49:23 Config A/D Result=40 07:49:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:23 Get A/D filter: -9.255963e+061 result=40 07:49:23 Get A/D value=-858993460 result=40 07:49:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:23 Parameters OK 07:49:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:23 Set A/D data flow result=40 07:49:23 Set A/D channel type result=40 07:49:23 Set A/D encoding result=40 07:49:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:23 Set channel filter=0.000000e+000 result=40 07:49:23 Config A/D Result=40 07:49:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:23 Get A/D filter: -9.255963e+061 result=40 07:49:23 Get A/D value=-858993460 result=40 07:49:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:23 Aux= 07:49:23 Message to Camera, serial 80956 queued 07:49:59 Received message from Master: op=PointingHead serial=80968 07:49:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:49:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:49:59 Point started: ret=0 07:49:59 point_skyscan result=0 07:50:00 Check angles 07:50:00 SkyScan query 07:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.58<-13572 Statuses=0008 0009 07:50:00 Msec=0 True Az=112.995 Ze=-23.58 Az status=0008 Ze status=0009 07:50:01 Check angles 07:50:01 SkyScan query 07:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.985<-14999 Statuses=0008 0009 07:50:01 Msec=750 True Az=112.995 Ze=-44.985 Az status=0008 Ze status=0009 07:50:01 Check angles 07:50:01 SkyScan query 07:50:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.925<-16395 Statuses=0008 0009 07:50:02 Msec=1500 True Az=112.995 Ze=-65.925 Az status=0008 Ze status=0009 07:50:02 Check angles 07:50:02 SkyScan query 07:50:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.865<-17791 Statuses=0008 0009 07:50:03 Msec=2250 True Az=112.995 Ze=-86.865 Az status=0008 Ze status=0009 07:50:03 Check angles 07:50:03 SkyScan query 07:50:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.835<-19189 Statuses=0008 0009 07:50:03 Msec=3000 True Az=112.995 Ze=-107.835 Az status=0008 Ze status=0009 07:50:04 Check angles 07:50:04 SkyScan query 07:50:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.76<-20584 Statuses=0008 0009 07:50:04 Msec=3750 True Az=112.995 Ze=-128.76 Az status=0008 Ze status=0009 07:50:04 Check angles 07:50:04 SkyScan query 07:50:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.73<-21982 Statuses=0008 0009 07:50:05 Msec=4500 True Az=112.995 Ze=-149.73 Az status=0008 Ze status=0009 07:50:05 Check angles 07:50:05 SkyScan query 07:50:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.655<-23377 Statuses=0008 0009 07:50:06 Msec=5250 True Az=112.995 Ze=-170.655 Az status=0008 Ze status=0009 07:50:06 Check angles 07:50:06 SkyScan query 07:50:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:50:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:50:06 Message to Master queued w/err=0: serial=80968 error=0 07:50:11 Received message from Master: op=Filter serial=80969 07:50:11 Color wheel filter change from 0 to 0 07:50:11 FLIGetFilterPos err=0 currentPosition=0 07:50:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:11 Filter is already there-color wheel unchanged 07:50:12 Received message from Master: op=Shutter serial=80970 07:50:12 Shutter LASER open 07:50:12 Received message from Camera: op=State serial=80972 07:50:12 GetSingleValue result=40 Value=cccccccc 07:50:12 SkyScan query 07:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:50:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:12 Parameters OK 07:50:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:12 Set A/D data flow result=40 07:50:12 Set A/D channel type result=40 07:50:12 Set A/D encoding result=40 07:50:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:12 Set channel filter=0.000000e+000 result=40 07:50:12 Config A/D Result=40 07:50:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:12 Get A/D filter: -9.255963e+061 result=40 07:50:12 Get A/D value=-858993460 result=40 07:50:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:12 Parameters OK 07:50:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:12 Set A/D data flow result=40 07:50:12 Set A/D channel type result=40 07:50:12 Set A/D encoding result=40 07:50:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:12 Set channel filter=0.000000e+000 result=40 07:50:12 Config A/D Result=40 07:50:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:12 Get A/D filter: -9.255963e+061 result=40 07:50:12 Get A/D value=-858993460 result=40 07:50:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:12 Aux= 07:50:12 Message to Camera, serial 80972 queued 07:50:21 Received message from Master: op=Shutter serial=80982 07:50:21 Shutter LASER close 07:50:21 Received message from Master: op=PointingHead serial=80986 07:50:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:50:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:50:22 Point started: ret=0 07:50:22 point_skyscan result=0 07:50:22 Check angles 07:50:22 SkyScan query 07:50:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.65<-21510 Statuses=0008 0009 07:50:23 Msec=0 True Az=112.995 Ze=-142.65 Az status=0008 Ze status=0009 07:50:23 Check angles 07:50:23 SkyScan query 07:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 07:50:24 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 07:50:24 Check angles 07:50:24 SkyScan query 07:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.77<-18718 Statuses=0008 0009 07:50:24 Msec=1500 True Az=112.995 Ze=-100.77 Az status=0008 Ze status=0009 07:50:25 Check angles 07:50:25 SkyScan query 07:50:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.815<-17321 Statuses=0008 0009 07:50:25 Msec=2250 True Az=112.995 Ze=-79.815 Az status=0008 Ze status=0009 07:50:25 Check angles 07:50:25 SkyScan query 07:50:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.86<-15924 Statuses=0008 0009 07:50:26 Msec=3000 True Az=112.995 Ze=-58.86 Az status=0008 Ze status=0009 07:50:26 Check angles 07:50:26 SkyScan query 07:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 07:50:27 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 07:50:27 Check angles 07:50:27 SkyScan query 07:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.935<-13129 Statuses=0008 0009 07:50:27 Msec=4500 True Az=112.995 Ze=-16.935 Az status=0008 Ze status=0009 07:50:28 Check angles 07:50:28 SkyScan query 07:50:28 SkyScan query done: ret=0 az=112.995<-7533 ze=4.395<-11707 Statuses=0008 0009 07:50:28 Msec=5250 True Az=112.995 Ze=4.395 Az status=0008 Ze status=0009 07:50:28 Check angles 07:50:28 SkyScan query 07:50:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:50:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:50:29 Message to Master queued w/err=0: serial=80986 error=0 07:50:34 Received message from Master: op=Filter serial=80987 07:50:34 Color wheel filter change from 0 to 0 07:50:34 FLIGetFilterPos err=0 currentPosition=0 07:50:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:34 Filter is already there-color wheel unchanged 07:50:34 Received message from Master: op=Shutter serial=80988 07:50:34 Shutter LASER close 07:50:34 Received message from Camera: op=State serial=80990 07:50:34 GetSingleValue result=40 Value=cccccccc 07:50:34 SkyScan query 07:50:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:50:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:35 Parameters OK 07:50:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:35 Set A/D data flow result=40 07:50:35 Set A/D channel type result=40 07:50:35 Set A/D encoding result=40 07:50:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:35 Set channel filter=0.000000e+000 result=40 07:50:35 Config A/D Result=40 07:50:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:35 Get A/D filter: -9.255963e+061 result=40 07:50:35 Get A/D value=-858993460 result=40 07:50:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:35 Parameters OK 07:50:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:35 Set A/D data flow result=40 07:50:35 Set A/D channel type result=40 07:50:35 Set A/D encoding result=40 07:50:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:35 Set channel filter=0.000000e+000 result=40 07:50:35 Config A/D Result=40 07:50:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:35 Get A/D filter: -9.255963e+061 result=40 07:50:35 Get A/D value=-858993460 result=40 07:50:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:35 Aux= 07:50:35 Message to Camera, serial 80990 queued 07:51:12 Received message from Master: op=PointingHead serial=81003 07:51:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:51:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:51:12 Point started: ret=0 07:51:12 point_skyscan result=0 07:51:13 Check angles 07:51:13 SkyScan query 07:51:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:51:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:51:13 Message to Master queued w/err=0: serial=81003 error=0 07:51:18 Received message from Master: op=Filter serial=81004 07:51:18 Color wheel filter change from 0 to 0 07:51:18 FLIGetFilterPos err=0 currentPosition=0 07:51:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:18 Filter is already there-color wheel unchanged 07:51:19 Received message from Master: op=Shutter serial=81005 07:51:19 Shutter LASER close 07:51:19 Received message from Camera: op=State serial=81007 07:51:19 GetSingleValue result=40 Value=cccccccc 07:51:19 SkyScan query 07:51:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:51:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:19 Parameters OK 07:51:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:19 Set A/D data flow result=40 07:51:19 Set A/D channel type result=40 07:51:19 Set A/D encoding result=40 07:51:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:19 Set channel filter=0.000000e+000 result=40 07:51:19 Config A/D Result=40 07:51:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:19 Get A/D filter: -9.255963e+061 result=40 07:51:19 Get A/D value=-858993460 result=40 07:51:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:19 Parameters OK 07:51:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:19 Set A/D data flow result=40 07:51:19 Set A/D channel type result=40 07:51:19 Set A/D encoding result=40 07:51:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:19 Set channel filter=0.000000e+000 result=40 07:51:19 Config A/D Result=40 07:51:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:19 Get A/D filter: -9.255963e+061 result=40 07:51:19 Get A/D value=-858993460 result=40 07:51:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:19 Aux= 07:51:19 Message to Camera, serial 81007 queued 07:51:56 Received message from Master: op=PointingHead serial=81020 07:51:56 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:51:56 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:51:56 Point started: ret=0 07:51:56 point_skyscan result=0 07:51:57 Check angles 07:51:57 SkyScan query 07:51:58 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 07:51:58 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 07:51:58 Check angles 07:51:58 SkyScan query 07:51:58 SkyScan query done: ret=0 az=153.99<-10266 ze=-6.495<-12433 Statuses=0009 0008 07:51:58 Msec=750 True Az=153.99 Ze=-6.495 Az status=0009 Ze status=0008 07:51:59 Check angles 07:51:59 SkyScan query 07:51:59 SkyScan query done: ret=0 az=171.525<-11435 ze=-6.495<-12433 Statuses=0009 0008 07:51:59 Msec=1500 True Az=171.525 Ze=-6.495 Az status=0009 Ze status=0008 07:51:59 Check angles 07:51:59 SkyScan query 07:52:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:52:00 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:52:00 Message to Master queued w/err=0: serial=81020 error=0 07:52:05 Received message from Master: op=Filter serial=81021 07:52:05 Color wheel filter change from 0 to 0 07:52:05 FLIGetFilterPos err=0 currentPosition=0 07:52:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:05 Filter is already there-color wheel unchanged 07:52:05 Received message from Master: op=Shutter serial=81022 07:52:05 Shutter LASER close 07:52:05 Received message from Camera: op=State serial=81024 07:52:05 GetSingleValue result=40 Value=cccccccc 07:52:05 SkyScan query 07:52:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:52:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:06 Parameters OK 07:52:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:06 Set A/D data flow result=40 07:52:06 Set A/D channel type result=40 07:52:06 Set A/D encoding result=40 07:52:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:06 Set channel filter=0.000000e+000 result=40 07:52:06 Config A/D Result=40 07:52:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:06 Get A/D filter: -9.255963e+061 result=40 07:52:06 Get A/D value=-858993460 result=40 07:52:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:06 Parameters OK 07:52:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:06 Set A/D data flow result=40 07:52:06 Set A/D channel type result=40 07:52:06 Set A/D encoding result=40 07:52:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:06 Set channel filter=0.000000e+000 result=40 07:52:06 Config A/D Result=40 07:52:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:06 Get A/D filter: -9.255963e+061 result=40 07:52:06 Get A/D value=-858993460 result=40 07:52:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:06 Aux= 07:52:06 Message to Camera, serial 81024 queued 07:52:43 Received message from Master: op=PointingHead serial=81037 07:52:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:52:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:52:43 Point started: ret=0 07:52:43 point_skyscan result=0 07:52:44 Check angles 07:52:44 SkyScan query 07:52:44 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 07:52:44 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 07:52:44 Check angles 07:52:44 SkyScan query 07:52:45 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 07:52:45 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 07:52:45 Check angles 07:52:45 SkyScan query 07:52:46 SkyScan query done: ret=0 az=117.645<-7843 ze=6.495<-11567 Statuses=0009 0008 07:52:46 Msec=1500 True Az=117.645 Ze=6.495 Az status=0009 Ze status=0008 07:52:46 Check angles 07:52:46 SkyScan query 07:52:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:52:47 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:52:47 Message to Master queued w/err=0: serial=81037 error=0 07:52:52 Received message from Master: op=Filter serial=81038 07:52:52 Color wheel filter change from 0 to 0 07:52:52 FLIGetFilterPos err=0 currentPosition=0 07:52:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:52 Filter is already there-color wheel unchanged 07:52:52 Received message from Master: op=Shutter serial=81039 07:52:52 Shutter LASER close 07:52:52 Received message from Camera: op=State serial=81041 07:52:52 GetSingleValue result=40 Value=cccccccc 07:52:52 SkyScan query 07:52:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:52:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:52 Parameters OK 07:52:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:52 Set A/D data flow result=40 07:52:52 Set A/D channel type result=40 07:52:52 Set A/D encoding result=40 07:52:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:52 Set channel filter=0.000000e+000 result=40 07:52:52 Config A/D Result=40 07:52:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:52 Get A/D filter: -9.255963e+061 result=40 07:52:52 Get A/D value=-858993460 result=40 07:52:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:52 Parameters OK 07:52:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:52 Set A/D data flow result=40 07:52:52 Set A/D channel type result=40 07:52:52 Set A/D encoding result=40 07:52:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:52 Set channel filter=0.000000e+000 result=40 07:52:52 Config A/D Result=40 07:52:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:52 Get A/D filter: -9.255963e+061 result=40 07:52:52 Get A/D value=-858993460 result=40 07:52:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:52 Aux= 07:52:52 Message to Camera, serial 81041 queued 07:53:29 Received message from Master: op=PointingHead serial=81054 07:53:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:53:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:53:30 Point started: ret=0 07:53:30 point_skyscan result=0 07:53:30 Check angles 07:53:30 SkyScan query 07:53:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 07:53:31 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 07:53:31 Check angles 07:53:31 SkyScan query 07:53:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 07:53:32 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 07:53:32 Check angles 07:53:32 SkyScan query 07:53:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.43<-16362 Statuses=0008 0009 07:53:32 Msec=1500 True Az=112.995 Ze=-65.43 Az status=0008 Ze status=0009 07:53:33 Check angles 07:53:33 SkyScan query 07:53:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.385<-17759 Statuses=0008 0009 07:53:33 Msec=2250 True Az=112.995 Ze=-86.385 Az status=0008 Ze status=0009 07:53:33 Check angles 07:53:33 SkyScan query 07:53:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.76<-19184 Statuses=0008 0009 07:53:34 Msec=3000 True Az=112.995 Ze=-107.76 Az status=0008 Ze status=0009 07:53:34 Check angles 07:53:34 SkyScan query 07:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.685<-20579 Statuses=0008 0009 07:53:35 Msec=3750 True Az=112.995 Ze=-128.685 Az status=0008 Ze status=0009 07:53:35 Check angles 07:53:35 SkyScan query 07:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.655<-21977 Statuses=0008 0009 07:53:35 Msec=4500 True Az=112.995 Ze=-149.655 Az status=0008 Ze status=0009 07:53:36 Check angles 07:53:36 SkyScan query 07:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 07:53:36 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 07:53:36 Check angles 07:53:36 SkyScan query 07:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:53:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:53:37 Message to Master queued w/err=0: serial=81054 error=0 07:53:42 Received message from Master: op=Filter serial=81055 07:53:42 Color wheel filter change from 0 to 0 07:53:42 FLIGetFilterPos err=0 currentPosition=0 07:53:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:42 Filter is already there-color wheel unchanged 07:53:42 Received message from Master: op=Shutter serial=81056 07:53:42 Shutter LASER open 07:53:42 Received message from Camera: op=State serial=81058 07:53:42 GetSingleValue result=40 Value=cccccccc 07:53:42 SkyScan query 07:53:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:53:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:43 Parameters OK 07:53:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:43 Set A/D data flow result=40 07:53:43 Set A/D channel type result=40 07:53:43 Set A/D encoding result=40 07:53:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:43 Set channel filter=0.000000e+000 result=40 07:53:43 Config A/D Result=40 07:53:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:43 Get A/D filter: -9.255963e+061 result=40 07:53:43 Get A/D value=-858993460 result=40 07:53:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:43 Parameters OK 07:53:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:43 Set A/D data flow result=40 07:53:43 Set A/D channel type result=40 07:53:43 Set A/D encoding result=40 07:53:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:43 Set channel filter=0.000000e+000 result=40 07:53:43 Config A/D Result=40 07:53:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:43 Get A/D filter: -9.255963e+061 result=40 07:53:43 Get A/D value=-858993460 result=40 07:53:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:43 Aux= 07:53:43 Message to Camera, serial 81058 queued 07:53:51 Received message from Master: op=Shutter serial=81068 07:53:51 Shutter LASER close 07:53:52 Received message from Master: op=PointingHead serial=81072 07:53:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:53:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:53:52 Point started: ret=0 07:53:52 point_skyscan result=0 07:53:53 Check angles 07:53:53 SkyScan query 07:53:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 07:53:53 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 07:53:54 Check angles 07:53:54 SkyScan query 07:53:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 07:53:54 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 07:53:54 Check angles 07:53:54 SkyScan query 07:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 07:53:55 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 07:53:55 Check angles 07:53:55 SkyScan query 07:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.4<-17360 Statuses=0008 0009 07:53:56 Msec=2250 True Az=112.995 Ze=-80.4 Az status=0008 Ze status=0009 07:53:56 Check angles 07:53:56 SkyScan query 07:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.46<-15964 Statuses=0008 0009 07:53:56 Msec=3000 True Az=112.995 Ze=-59.46 Az status=0008 Ze status=0009 07:53:57 Check angles 07:53:57 SkyScan query 07:53:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.49<-14566 Statuses=0008 0009 07:53:57 Msec=3750 True Az=112.995 Ze=-38.49 Az status=0008 Ze status=0009 07:53:57 Check angles 07:53:57 SkyScan query 07:53:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.55<-13170 Statuses=0008 0009 07:53:58 Msec=4500 True Az=112.995 Ze=-17.55 Az status=0008 Ze status=0009 07:53:58 Check angles 07:53:58 SkyScan query 07:53:59 SkyScan query done: ret=0 az=112.995<-7533 ze=3.465<-11769 Statuses=0008 0009 07:53:59 Msec=5250 True Az=112.995 Ze=3.465 Az status=0008 Ze status=0009 07:53:59 Check angles 07:53:59 SkyScan query 07:53:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:53:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:53:59 Message to Master queued w/err=0: serial=81072 error=0 07:54:04 Received message from Master: op=Filter serial=81073 07:54:04 Color wheel filter change from 0 to 0 07:54:04 FLIGetFilterPos err=0 currentPosition=0 07:54:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:04 Filter is already there-color wheel unchanged 07:54:05 Received message from Master: op=Shutter serial=81074 07:54:05 Shutter LASER close 07:54:05 Received message from Camera: op=State serial=81076 07:54:05 GetSingleValue result=40 Value=cccccccc 07:54:05 SkyScan query 07:54:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:54:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:05 Parameters OK 07:54:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:05 Set A/D data flow result=40 07:54:05 Set A/D channel type result=40 07:54:05 Set A/D encoding result=40 07:54:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:05 Set channel filter=0.000000e+000 result=40 07:54:05 Config A/D Result=40 07:54:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:05 Get A/D filter: -9.255963e+061 result=40 07:54:05 Get A/D value=-858993460 result=40 07:54:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:05 Parameters OK 07:54:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:05 Set A/D data flow result=40 07:54:05 Set A/D channel type result=40 [UTC 2019-3-3 07:54:05] 07:54:05 Set A/D encoding result=40 07:54:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:05 Set channel filter=0.000000e+000 result=40 07:54:05 Config A/D Result=40 07:54:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:05 Get A/D filter: -9.255963e+061 result=40 07:54:05 Get A/D value=-858993460 result=40 07:54:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:05 Aux= 07:54:05 Message to Camera, serial 81076 queued 07:54:42 Received message from Master: op=PointingHead serial=81089 07:54:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:54:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:54:43 Point started: ret=0 07:54:43 point_skyscan result=0 07:54:43 Check angles 07:54:43 SkyScan query 07:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:54:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:54:44 Message to Master queued w/err=0: serial=81089 error=0 07:54:49 Received message from Master: op=Filter serial=81090 07:54:49 Color wheel filter change from 0 to 0 07:54:49 FLIGetFilterPos err=0 currentPosition=0 07:54:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:49 Filter is already there-color wheel unchanged 07:54:49 Received message from Master: op=Shutter serial=81091 07:54:49 Shutter LASER close 07:54:49 Received message from Camera: op=State serial=81093 07:54:49 GetSingleValue result=40 Value=cccccccc 07:54:49 SkyScan query 07:54:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:54:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:50 Parameters OK 07:54:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:50 Set A/D data flow result=40 07:54:50 Set A/D channel type result=40 07:54:50 Set A/D encoding result=40 07:54:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:50 Set channel filter=0.000000e+000 result=40 07:54:50 Config A/D Result=40 07:54:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:50 Get A/D filter: -9.255963e+061 result=40 07:54:50 Get A/D value=-858993460 result=40 07:54:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:50 Parameters OK 07:54:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:50 Set A/D data flow result=40 07:54:50 Set A/D channel type result=40 07:54:50 Set A/D encoding result=40 07:54:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:50 Set channel filter=0.000000e+000 result=40 07:54:50 Config A/D Result=40 07:54:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:50 Get A/D filter: -9.255963e+061 result=40 07:54:50 Get A/D value=-858993460 result=40 07:54:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:50 Aux= 07:54:50 Message to Camera, serial 81093 queued 07:55:26 Received message from Master: op=PointingHead serial=81106 07:55:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:55:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:55:27 Point started: ret=0 07:55:27 point_skyscan result=0 07:55:28 Check angles 07:55:28 SkyScan query 07:55:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:55:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:55:28 Message to Master queued w/err=0: serial=81106 error=0 07:55:33 Received message from Master: op=Filter serial=81107 07:55:33 Color wheel filter change from 0 to 0 07:55:33 FLIGetFilterPos err=0 currentPosition=0 07:55:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:55:33 Filter is already there-color wheel unchanged 07:55:33 Received message from Master: op=Shutter serial=81108 07:55:33 Shutter LASER close 07:55:33 Received message from Camera: op=State serial=81110 07:55:33 GetSingleValue result=40 Value=cccccccc 07:55:33 SkyScan query 07:55:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:55:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:34 Parameters OK 07:55:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:34 Set A/D data flow result=40 07:55:34 Set A/D channel type result=40 07:55:34 Set A/D encoding result=40 07:55:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:34 Set channel filter=0.000000e+000 result=40 07:55:34 Config A/D Result=40 07:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:34 Get A/D filter: -9.255963e+061 result=40 07:55:34 Get A/D value=-858993460 result=40 07:55:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:34 Parameters OK 07:55:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:34 Set A/D data flow result=40 07:55:34 Set A/D channel type result=40 07:55:34 Set A/D encoding result=40 07:55:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:34 Set channel filter=0.000000e+000 result=40 07:55:34 Config A/D Result=40 07:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:34 Get A/D filter: -9.255963e+061 result=40 07:55:34 Get A/D value=-858993460 result=40 07:55:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:55:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:55:34 Aux= 07:55:34 Message to Camera, serial 81110 queued 07:56:11 Received message from Master: op=PointingHead serial=81123 07:56:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:56:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:56:11 Point started: ret=0 07:56:11 point_skyscan result=0 07:56:12 Check angles 07:56:12 SkyScan query 07:56:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:56:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:56:12 Message to Master queued w/err=0: serial=81123 error=0 07:56:17 Received message from Master: op=Filter serial=81124 07:56:17 Color wheel filter change from 0 to 0 07:56:17 FLIGetFilterPos err=0 currentPosition=0 07:56:17 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:17 Filter is already there-color wheel unchanged 07:56:18 Received message from Master: op=Shutter serial=81125 07:56:18 Shutter LASER close 07:56:18 Received message from Camera: op=State serial=81127 07:56:18 GetSingleValue result=40 Value=cccccccc 07:56:18 SkyScan query 07:56:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:56:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:18 Parameters OK 07:56:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:18 Set A/D data flow result=40 07:56:18 Set A/D channel type result=40 07:56:18 Set A/D encoding result=40 07:56:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:18 Set channel filter=0.000000e+000 result=40 07:56:18 Config A/D Result=40 07:56:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:18 Get A/D filter: -9.255963e+061 result=40 07:56:18 Get A/D value=-858993460 result=40 07:56:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:18 Parameters OK 07:56:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:18 Set A/D data flow result=40 07:56:18 Set A/D channel type result=40 07:56:18 Set A/D encoding result=40 07:56:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:18 Set channel filter=0.000000e+000 result=40 07:56:18 Config A/D Result=40 07:56:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:18 Get A/D filter: -9.255963e+061 result=40 07:56:18 Get A/D value=-858993460 result=40 07:56:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:18 Aux= 07:56:18 Message to Camera, serial 81127 queued 07:56:55 Received message from Master: op=PointingHead serial=81140 07:56:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:56:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:56:55 Point started: ret=0 07:56:55 point_skyscan result=0 07:56:56 Check angles 07:56:56 SkyScan query 07:56:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 07:56:57 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 07:56:57 Check angles 07:56:57 SkyScan query 07:56:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 07:56:58 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 07:56:58 Check angles 07:56:58 SkyScan query 07:56:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.175<-16345 Statuses=0008 0009 07:56:58 Msec=1500 True Az=112.995 Ze=-65.175 Az status=0008 Ze status=0009 07:56:58 Check angles 07:56:58 SkyScan query 07:56:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.16<-17744 Statuses=0008 0009 07:56:59 Msec=2250 True Az=112.995 Ze=-86.16 Az status=0008 Ze status=0009 07:56:59 Check angles 07:56:59 SkyScan query 07:57:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.085<-19139 Statuses=0008 0009 07:57:00 Msec=3000 True Az=112.995 Ze=-107.085 Az status=0008 Ze status=0009 07:57:00 Check angles 07:57:00 SkyScan query 07:57:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.04<-20536 Statuses=0008 0009 07:57:01 Msec=3750 True Az=112.995 Ze=-128.04 Az status=0008 Ze status=0009 07:57:01 Check angles 07:57:01 SkyScan query 07:57:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.995<-21933 Statuses=0008 0009 07:57:01 Msec=4500 True Az=112.995 Ze=-148.995 Az status=0008 Ze status=0009 07:57:01 Check angles 07:57:01 SkyScan query 07:57:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.935<-23329 Statuses=0008 0009 07:57:02 Msec=5250 True Az=112.995 Ze=-169.935 Az status=0008 Ze status=0009 07:57:02 Check angles 07:57:02 SkyScan query 07:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:57:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:57:03 Message to Master queued w/err=0: serial=81140 error=0 07:57:08 Received message from Master: op=Filter serial=81141 07:57:08 Color wheel filter change from 0 to 0 07:57:08 FLIGetFilterPos err=0 currentPosition=0 07:57:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:08 Filter is already there-color wheel unchanged 07:57:08 Received message from Master: op=Shutter serial=81142 07:57:08 Shutter LASER open 07:57:08 Received message from Camera: op=State serial=81144 07:57:08 GetSingleValue result=40 Value=cccccccc 07:57:08 SkyScan query 07:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:57:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:09 Parameters OK 07:57:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:09 Set A/D data flow result=40 07:57:09 Set A/D channel type result=40 07:57:09 Set A/D encoding result=40 07:57:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:09 Set channel filter=0.000000e+000 result=40 07:57:09 Config A/D Result=40 07:57:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:09 Get A/D filter: -9.255963e+061 result=40 07:57:09 Get A/D value=-858993460 result=40 07:57:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:09 Parameters OK 07:57:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:09 Set A/D data flow result=40 07:57:09 Set A/D channel type result=40 07:57:09 Set A/D encoding result=40 07:57:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:09 Set channel filter=0.000000e+000 result=40 07:57:09 Config A/D Result=40 07:57:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:09 Get A/D filter: -9.255963e+061 result=40 07:57:09 Get A/D value=-858993460 result=40 07:57:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:09 Aux= 07:57:09 Message to Camera, serial 81144 queued 07:57:17 Received message from Master: op=Shutter serial=81154 07:57:17 Shutter LASER close 07:57:18 Received message from Master: op=PointingHead serial=81158 07:57:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:57:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:57:18 Point started: ret=0 07:57:18 point_skyscan result=0 07:57:19 Check angles 07:57:19 SkyScan query 07:57:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.935<-21529 Statuses=0008 0009 07:57:19 Msec=0 True Az=112.995 Ze=-142.935 Az status=0008 Ze status=0009 07:57:20 Check angles 07:57:20 SkyScan query 07:57:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.95<-20130 Statuses=0008 0009 07:57:20 Msec=750 True Az=112.995 Ze=-121.95 Az status=0008 Ze status=0009 07:57:20 Check angles 07:57:20 SkyScan query 07:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 07:57:21 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 07:57:21 Check angles 07:57:21 SkyScan query 07:57:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.635<-17309 Statuses=0008 0009 07:57:22 Msec=2250 True Az=112.995 Ze=-79.635 Az status=0008 Ze status=0009 07:57:22 Check angles 07:57:22 SkyScan query 07:57:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.68<-15912 Statuses=0008 0009 07:57:22 Msec=3000 True Az=112.995 Ze=-58.68 Az status=0008 Ze status=0009 07:57:23 Check angles 07:57:23 SkyScan query 07:57:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.305<-14487 Statuses=0008 0009 07:57:23 Msec=3750 True Az=112.995 Ze=-37.305 Az status=0008 Ze status=0009 07:57:23 Check angles 07:57:23 SkyScan query 07:57:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.32<-13088 Statuses=0008 0009 07:57:24 Msec=4500 True Az=112.995 Ze=-16.32 Az status=0008 Ze status=0009 07:57:24 Check angles 07:57:24 SkyScan query 07:57:25 SkyScan query done: ret=0 az=112.995<-7533 ze=4.53<-11698 Statuses=0008 0009 07:57:25 Msec=5250 True Az=112.995 Ze=4.53 Az status=0008 Ze status=0009 07:57:25 Check angles 07:57:25 SkyScan query 07:57:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:57:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:57:26 Message to Master queued w/err=0: serial=81158 error=0 07:57:31 Received message from Master: op=Filter serial=81159 07:57:31 Color wheel filter change from 0 to 0 07:57:31 FLIGetFilterPos err=0 currentPosition=0 07:57:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:31 Filter is already there-color wheel unchanged 07:57:31 Received message from Master: op=Shutter serial=81160 07:57:31 Shutter LASER close 07:57:31 Received message from Camera: op=State serial=81162 07:57:31 GetSingleValue result=40 Value=cccccccc 07:57:31 SkyScan query 07:57:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:57:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:31 Parameters OK 07:57:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:31 Set A/D data flow result=40 07:57:31 Set A/D channel type result=40 07:57:31 Set A/D encoding result=40 07:57:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:31 Set channel filter=0.000000e+000 result=40 07:57:31 Config A/D Result=40 07:57:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:31 Get A/D filter: -9.255963e+061 result=40 07:57:31 Get A/D value=-858993460 result=40 07:57:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:31 Parameters OK 07:57:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:31 Set A/D data flow result=40 07:57:31 Set A/D channel type result=40 07:57:31 Set A/D encoding result=40 07:57:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:31 Set channel filter=0.000000e+000 result=40 07:57:31 Config A/D Result=40 07:57:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:31 Get A/D filter: -9.255963e+061 result=40 07:57:31 Get A/D value=-858993460 result=40 07:57:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:31 Aux= 07:57:31 Message to Camera, serial 81162 queued 07:58:08 Received message from Master: op=PointingHead serial=81175 07:58:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:58:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:58:09 Point started: ret=0 07:58:09 point_skyscan result=0 07:58:09 Check angles 07:58:09 SkyScan query 07:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:58:10 Message to Master queued w/err=0: serial=81175 error=0 07:58:15 Received message from Master: op=Filter serial=81176 07:58:15 Color wheel filter change from 0 to 0 07:58:15 FLIGetFilterPos err=0 currentPosition=0 07:58:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:15 Filter is already there-color wheel unchanged 07:58:15 Received message from Master: op=Shutter serial=81177 07:58:15 Shutter LASER close 07:58:15 Received message from Camera: op=State serial=81179 07:58:15 GetSingleValue result=40 Value=cccccccc 07:58:15 SkyScan query 07:58:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:16 Parameters OK 07:58:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:16 Set A/D data flow result=40 07:58:16 Set A/D channel type result=40 07:58:16 Set A/D encoding result=40 07:58:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:16 Set channel filter=0.000000e+000 result=40 07:58:16 Config A/D Result=40 07:58:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:16 Get A/D filter: -9.255963e+061 result=40 07:58:16 Get A/D value=-858993460 result=40 07:58:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:16 Parameters OK 07:58:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:16 Set A/D data flow result=40 07:58:16 Set A/D channel type result=40 07:58:16 Set A/D encoding result=40 07:58:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:16 Set channel filter=0.000000e+000 result=40 07:58:16 Config A/D Result=40 07:58:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:16 Get A/D filter: -9.255963e+061 result=40 07:58:16 Get A/D value=-858993460 result=40 07:58:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:16 Aux= 07:58:16 Message to Camera, serial 81179 queued 07:58:53 Received message from Master: op=PointingHead serial=81192 07:58:53 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:58:53 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:58:53 Point started: ret=0 07:58:53 point_skyscan result=0 07:58:54 Check angles 07:58:54 SkyScan query 07:58:54 SkyScan query done: ret=0 az=135.99<-9066 ze=-6.51<-12434 Statuses=0009 0008 07:58:54 Msec=0 True Az=135.99 Ze=-6.51 Az status=0009 Ze status=0008 07:58:54 Check angles 07:58:54 SkyScan query 07:58:55 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 07:58:55 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 07:58:55 Check angles 07:58:55 SkyScan query 07:58:56 SkyScan query done: ret=0 az=170.94<-11396 ze=-6.495<-12433 Statuses=0009 0008 07:58:56 Msec=1500 True Az=170.94 Ze=-6.495 Az status=0009 Ze status=0008 07:58:56 Check angles 07:58:56 SkyScan query 07:58:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:58:57 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:58:57 Message to Master queued w/err=0: serial=81192 error=0 07:59:02 Received message from Master: op=Filter serial=81193 07:59:02 Color wheel filter change from 0 to 0 07:59:02 FLIGetFilterPos err=0 currentPosition=0 07:59:02 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:02 Filter is already there-color wheel unchanged 07:59:02 Received message from Master: op=Shutter serial=81194 07:59:02 Shutter LASER close 07:59:02 Received message from Camera: op=State serial=81196 07:59:02 GetSingleValue result=40 Value=cccccccc 07:59:02 SkyScan query 07:59:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:59:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:02 Parameters OK 07:59:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:02 Set A/D data flow result=40 07:59:02 Set A/D channel type result=40 07:59:02 Set A/D encoding result=40 07:59:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:02 Set channel filter=0.000000e+000 result=40 07:59:02 Config A/D Result=40 07:59:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:02 Get A/D filter: -9.255963e+061 result=40 07:59:02 Get A/D value=-858993460 result=40 07:59:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:02 Parameters OK 07:59:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:02 Set A/D data flow result=40 07:59:02 Set A/D channel type result=40 07:59:02 Set A/D encoding result=40 07:59:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:02 Set channel filter=0.000000e+000 result=40 07:59:02 Config A/D Result=40 07:59:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:02 Get A/D filter: -9.255963e+061 result=40 07:59:02 Get A/D value=-858993460 result=40 07:59:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:02 Aux= 07:59:02 Message to Camera, serial 81196 queued 07:59:39 Received message from Master: op=PointingHead serial=81209 07:59:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:59:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:59:40 Point started: ret=0 07:59:40 point_skyscan result=0 07:59:40 Check angles 07:59:40 SkyScan query 07:59:41 SkyScan query done: ret=0 az=153.165<-10211 ze=6.51<-11566 Statuses=0009 0008 07:59:41 Msec=0 True Az=153.165 Ze=6.51 Az status=0009 Ze status=0008 07:59:41 Check angles 07:59:41 SkyScan query 07:59:42 SkyScan query done: ret=0 az=135.315<-9021 ze=6.495<-11567 Statuses=0009 0008 07:59:42 Msec=750 True Az=135.315 Ze=6.495 Az status=0009 Ze status=0008 07:59:42 Check angles 07:59:42 SkyScan query 07:59:42 SkyScan query done: ret=0 az=117.885<-7859 ze=6.495<-11567 Statuses=0009 0008 07:59:42 Msec=1500 True Az=117.885 Ze=6.495 Az status=0009 Ze status=0008 07:59:43 Check angles 07:59:43 SkyScan query 07:59:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:59:43 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:59:43 Message to Master queued w/err=0: serial=81209 error=0 07:59:48 Received message from Master: op=Filter serial=81210 07:59:48 Color wheel filter change from 0 to 0 07:59:48 FLIGetFilterPos err=0 currentPosition=0 07:59:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:48 Filter is already there-color wheel unchanged 07:59:48 Received message from Master: op=Shutter serial=81211 07:59:48 Shutter LASER close 07:59:48 Received message from Camera: op=State serial=81213 07:59:48 GetSingleValue result=40 Value=cccccccc 07:59:48 SkyScan query 07:59:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:59:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:49 Parameters OK 07:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:49 Set A/D data flow result=40 07:59:49 Set A/D channel type result=40 07:59:49 Set A/D encoding result=40 07:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:49 Set channel filter=0.000000e+000 result=40 07:59:49 Config A/D Result=40 07:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:49 Get A/D filter: -9.255963e+061 result=40 07:59:49 Get A/D value=-858993460 result=40 07:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:49 Parameters OK 07:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:49 Set A/D data flow result=40 07:59:49 Set A/D channel type result=40 07:59:49 Set A/D encoding result=40 07:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:49 Set channel filter=0.000000e+000 result=40 07:59:49 Config A/D Result=40 07:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:49 Get A/D filter: -9.255963e+061 result=40 07:59:49 Get A/D value=-858993460 result=40 07:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:49 Aux= 07:59:49 Message to Camera, serial 81213 queued 08:00:26 Received message from Master: op=PointingHead serial=81226 08:00:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:00:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:00:26 Point started: ret=0 08:00:26 point_skyscan result=0 08:00:27 Check angles 08:00:27 SkyScan query 08:00:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 08:00:27 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 08:00:28 Check angles 08:00:28 SkyScan query 08:00:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 08:00:28 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 08:00:28 Check angles 08:00:28 SkyScan query 08:00:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 08:00:29 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 08:00:29 Check angles 08:00:29 SkyScan query 08:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 08:00:30 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 08:00:30 Check angles 08:00:30 SkyScan query 08:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.835<-19189 Statuses=0008 0009 08:00:30 Msec=3000 True Az=112.995 Ze=-107.835 Az status=0008 Ze status=0009 08:00:31 Check angles 08:00:31 SkyScan query 08:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 08:00:31 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 08:00:31 Check angles 08:00:31 SkyScan query 08:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.745<-21983 Statuses=0008 0009 08:00:32 Msec=4500 True Az=112.995 Ze=-149.745 Az status=0008 Ze status=0009 08:00:32 Check angles 08:00:32 SkyScan query 08:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 08:00:33 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 08:00:33 Check angles 08:00:33 SkyScan query 08:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:00:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:00:33 Message to Master queued w/err=0: serial=81226 error=0 08:00:38 Received message from Master: op=Filter serial=81227 08:00:38 Color wheel filter change from 0 to 0 08:00:38 FLIGetFilterPos err=0 currentPosition=0 08:00:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:38 Filter is already there-color wheel unchanged 08:00:39 Received message from Master: op=Shutter serial=81228 08:00:39 Shutter LASER open 08:00:39 Received message from Camera: op=State serial=81230 08:00:39 GetSingleValue result=40 Value=cccccccc 08:00:39 SkyScan query 08:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:00:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:39 Parameters OK 08:00:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:39 Set A/D data flow result=40 08:00:39 Set A/D channel type result=40 08:00:39 Set A/D encoding result=40 08:00:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:39 Set channel filter=0.000000e+000 result=40 08:00:39 Config A/D Result=40 08:00:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:39 Get A/D filter: -9.255963e+061 result=40 08:00:39 Get A/D value=-858993460 result=40 08:00:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:39 Parameters OK 08:00:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:39 Set A/D data flow result=40 08:00:39 Set A/D channel type result=40 08:00:39 Set A/D encoding result=40 08:00:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:39 Set channel filter=0.000000e+000 result=40 08:00:39 Config A/D Result=40 08:00:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:39 Get A/D filter: -9.255963e+061 result=40 08:00:39 Get A/D value=-858993460 result=40 08:00:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:39 Aux= 08:00:39 Message to Camera, serial 81230 queued 08:00:48 Received message from Master: op=Shutter serial=81240 08:00:48 Shutter LASER close 08:00:48 Received message from Master: op=PointingHead serial=81244 08:00:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:00:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:00:49 Point started: ret=0 08:00:49 point_skyscan result=0 08:00:49 Check angles 08:00:49 SkyScan query 08:00:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 08:00:50 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 08:00:50 Check angles 08:00:50 SkyScan query 08:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.4<-20160 Statuses=0008 0009 08:00:51 Msec=750 True Az=112.995 Ze=-122.4 Az status=0008 Ze status=0009 08:00:51 Check angles 08:00:51 SkyScan query 08:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 08:00:51 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 08:00:52 Check angles 08:00:52 SkyScan query 08:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 08:00:52 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 08:00:52 Check angles 08:00:52 SkyScan query 08:00:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.52<-15968 Statuses=0008 0009 08:00:53 Msec=3000 True Az=112.995 Ze=-59.52 Az status=0008 Ze status=0009 08:00:53 Check angles 08:00:53 SkyScan query 08:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.565<-14571 Statuses=0008 0009 08:00:54 Msec=3750 True Az=112.995 Ze=-38.565 Az status=0008 Ze status=0009 08:00:54 Check angles 08:00:54 SkyScan query 08:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.175<-13145 Statuses=0008 0009 08:00:54 Msec=4500 True Az=112.995 Ze=-17.175 Az status=0008 Ze status=0009 08:00:55 Check angles 08:00:55 SkyScan query 08:00:55 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 08:00:55 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 08:00:55 Check angles 08:00:55 SkyScan query 08:00:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:00:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:00:56 Message to Master queued w/err=0: serial=81244 error=0 08:01:01 Received message from Master: op=Filter serial=81245 08:01:01 Color wheel filter change from 0 to 0 08:01:01 FLIGetFilterPos err=0 currentPosition=0 08:01:01 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:01 Filter is already there-color wheel unchanged 08:01:01 Received message from Master: op=Shutter serial=81246 08:01:01 Shutter LASER close 08:01:01 Received message from Camera: op=State serial=81248 08:01:01 GetSingleValue result=40 Value=cccccccc 08:01:01 SkyScan query 08:01:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:01:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:02 Parameters OK 08:01:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:02 Set A/D data flow result=40 08:01:02 Set A/D channel type result=40 08:01:02 Set A/D encoding result=40 08:01:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:02 Set channel filter=0.000000e+000 result=40 08:01:02 Config A/D Result=40 08:01:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:02 Get A/D filter: -9.255963e+061 result=40 08:01:02 Get A/D value=-858993460 result=40 08:01:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:02 Parameters OK 08:01:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:02 Set A/D data flow result=40 08:01:02 Set A/D channel type result=40 08:01:02 Set A/D encoding result=40 08:01:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:02 Set channel filter=0.000000e+000 result=40 08:01:02 Config A/D Result=40 08:01:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:02 Get A/D filter: -9.255963e+061 result=40 08:01:02 Get A/D value=-858993460 result=40 08:01:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:02 Aux= 08:01:02 Message to Camera, serial 81248 queued 08:01:39 Received message from Master: op=PointingHead serial=81261 08:01:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:01:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:01:39 Point started: ret=0 08:01:39 point_skyscan result=0 08:01:40 Check angles 08:01:40 SkyScan query 08:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:01:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:01:40 Message to Master queued w/err=0: serial=81261 error=0 08:01:45 Received message from Master: op=Filter serial=81262 08:01:45 Color wheel filter change from 0 to 0 08:01:45 FLIGetFilterPos err=0 currentPosition=0 08:01:45 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:45 Filter is already there-color wheel unchanged 08:01:46 Received message from Master: op=Shutter serial=81263 08:01:46 Shutter LASER close 08:01:46 Received message from Camera: op=State serial=81265 08:01:46 GetSingleValue result=40 Value=cccccccc 08:01:46 SkyScan query 08:01:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:01:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:46 Parameters OK 08:01:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:46 Set A/D data flow result=40 08:01:46 Set A/D channel type result=40 08:01:46 Set A/D encoding result=40 08:01:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:46 Set channel filter=0.000000e+000 result=40 08:01:46 Config A/D Result=40 08:01:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:46 Get A/D filter: -9.255963e+061 result=40 08:01:46 Get A/D value=-858993460 result=40 08:01:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:46 Parameters OK 08:01:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:46 Set A/D data flow result=40 08:01:46 Set A/D channel type result=40 08:01:46 Set A/D encoding result=40 08:01:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:46 Set channel filter=0.000000e+000 result=40 08:01:46 Config A/D Result=40 08:01:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:46 Get A/D filter: -9.255963e+061 result=40 08:01:46 Get A/D value=-858993460 result=40 08:01:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:46 Aux= 08:01:46 Message to Camera, serial 81265 queued 08:02:23 Received message from Master: op=PointingHead serial=81278 08:02:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:02:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:02:23 Point started: ret=0 08:02:23 point_skyscan result=0 08:02:24 Check angles 08:02:24 SkyScan query 08:02:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:02:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:02:25 Message to Master queued w/err=0: serial=81278 error=0 08:02:30 Received message from Master: op=Filter serial=81279 08:02:30 Color wheel filter change from 0 to 0 08:02:30 FLIGetFilterPos err=0 currentPosition=0 08:02:30 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:30 Filter is already there-color wheel unchanged 08:02:30 Received message from Master: op=Shutter serial=81280 08:02:30 Shutter LASER close 08:02:30 Received message from Camera: op=State serial=81282 08:02:30 GetSingleValue result=40 Value=cccccccc 08:02:30 SkyScan query 08:02:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:02:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:30 Parameters OK 08:02:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:30 Set A/D data flow result=40 08:02:30 Set A/D channel type result=40 08:02:30 Set A/D encoding result=40 08:02:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:30 Set channel filter=0.000000e+000 result=40 08:02:30 Config A/D Result=40 08:02:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:30 Get A/D filter: -9.255963e+061 result=40 08:02:30 Get A/D value=-858993460 result=40 08:02:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:30 Parameters OK 08:02:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:30 Set A/D data flow result=40 08:02:30 Set A/D channel type result=40 08:02:30 Set A/D encoding result=40 08:02:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:30 Set channel filter=0.000000e+000 result=40 08:02:30 Config A/D Result=40 08:02:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:30 Get A/D filter: -9.255963e+061 result=40 08:02:30 Get A/D value=-858993460 result=40 08:02:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:30 Aux= 08:02:30 Message to Camera, serial 81282 queued 08:03:07 Received message from Master: op=PointingHead serial=81295 08:03:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:03:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:03:08 Point started: ret=0 08:03:08 point_skyscan result=0 08:03:08 Check angles 08:03:08 SkyScan query 08:03:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:03:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:03:09 Message to Master queued w/err=0: serial=81295 error=0 08:03:14 Received message from Master: op=Filter serial=81296 08:03:14 Color wheel filter change from 0 to 0 08:03:14 FLIGetFilterPos err=0 currentPosition=0 08:03:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:14 Filter is already there-color wheel unchanged 08:03:14 Received message from Master: op=Shutter serial=81297 08:03:14 Shutter LASER close 08:03:14 Received message from Camera: op=State serial=81299 08:03:14 GetSingleValue result=40 Value=cccccccc 08:03:14 SkyScan query 08:03:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:03:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:15 Parameters OK 08:03:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:15 Set A/D data flow result=40 08:03:15 Set A/D channel type result=40 08:03:15 Set A/D encoding result=40 08:03:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:15 Set channel filter=0.000000e+000 result=40 08:03:15 Config A/D Result=40 08:03:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:15 Get A/D filter: -9.255963e+061 result=40 08:03:15 Get A/D value=-858993460 result=40 08:03:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:15 Parameters OK 08:03:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:15 Set A/D data flow result=40 08:03:15 Set A/D channel type result=40 08:03:15 Set A/D encoding result=40 08:03:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:15 Set channel filter=0.000000e+000 result=40 08:03:15 Config A/D Result=40 08:03:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:15 Get A/D filter: -9.255963e+061 result=40 08:03:15 Get A/D value=-858993460 result=40 08:03:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:15 Aux= 08:03:15 Message to Camera, serial 81299 queued 08:03:38 Received message from Master: op=Identify serial=81300 [UTC 2019-3-3 08:03:50] 08:03:51 Received message from Master: op=PointingHead serial=81314 08:03:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:03:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:03:51 Point started: ret=0 08:03:51 point_skyscan result=0 08:03:52 Check angles 08:03:52 SkyScan query 08:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 08:03:52 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 08:03:53 Check angles 08:03:53 SkyScan query 08:03:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 08:03:53 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 08:03:53 Check angles 08:03:53 SkyScan query 08:03:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.685<-16379 Statuses=0008 0009 08:03:54 Msec=1500 True Az=112.995 Ze=-65.685 Az status=0008 Ze status=0009 08:03:54 Check angles 08:03:54 SkyScan query 08:03:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 08:03:55 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 08:03:55 Check angles 08:03:55 SkyScan query 08:03:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.03<-19202 Statuses=0008 0009 08:03:55 Msec=3000 True Az=112.995 Ze=-108.03 Az status=0008 Ze status=0009 08:03:56 Check angles 08:03:56 SkyScan query 08:03:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.955<-20597 Statuses=0008 0009 08:03:56 Msec=3750 True Az=112.995 Ze=-128.955 Az status=0008 Ze status=0009 08:03:56 Check angles 08:03:56 SkyScan query 08:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.94<-21996 Statuses=0008 0009 08:03:57 Msec=4500 True Az=112.995 Ze=-149.94 Az status=0008 Ze status=0009 08:03:57 Check angles 08:03:57 SkyScan query 08:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.82<-23388 Statuses=0008 0009 08:03:58 Msec=5250 True Az=112.995 Ze=-170.82 Az status=0008 Ze status=0009 08:03:58 Check angles 08:03:58 SkyScan query 08:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:03:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:03:58 Message to Master queued w/err=0: serial=81314 error=0 08:04:03 Received message from Master: op=Filter serial=81315 08:04:03 Color wheel filter change from 0 to 0 08:04:03 FLIGetFilterPos err=0 currentPosition=0 08:04:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:03 Filter is already there-color wheel unchanged 08:04:04 Received message from Master: op=Shutter serial=81316 08:04:04 Shutter LASER open 08:04:04 Received message from Camera: op=State serial=81318 08:04:04 GetSingleValue result=40 Value=cccccccc 08:04:04 SkyScan query 08:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:04:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:04 Parameters OK 08:04:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:04 Set A/D data flow result=40 08:04:04 Set A/D channel type result=40 08:04:04 Set A/D encoding result=40 08:04:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:04 Set channel filter=0.000000e+000 result=40 08:04:04 Config A/D Result=40 08:04:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:04 Get A/D filter: -9.255963e+061 result=40 08:04:04 Get A/D value=-858993460 result=40 08:04:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:04 Parameters OK 08:04:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:04 Set A/D data flow result=40 08:04:04 Set A/D channel type result=40 08:04:04 Set A/D encoding result=40 08:04:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:04 Set channel filter=0.000000e+000 result=40 08:04:04 Config A/D Result=40 08:04:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:04 Get A/D filter: -9.255963e+061 result=40 08:04:04 Get A/D value=-858993460 result=40 08:04:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:04 Aux= 08:04:04 Message to Camera, serial 81318 queued 08:04:13 Received message from Master: op=Shutter serial=81328 08:04:13 Shutter LASER close 08:04:13 Received message from Master: op=PointingHead serial=81332 08:04:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:04:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:04:14 Point started: ret=0 08:04:14 point_skyscan result=0 08:04:14 Check angles 08:04:14 SkyScan query 08:04:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 08:04:15 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 08:04:15 Check angles 08:04:15 SkyScan query 08:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 08:04:16 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 08:04:16 Check angles 08:04:16 SkyScan query 08:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.695<-18713 Statuses=0008 0009 08:04:17 Msec=1500 True Az=112.995 Ze=-100.695 Az status=0008 Ze status=0009 08:04:17 Check angles 08:04:17 SkyScan query 08:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.29<-17286 Statuses=0008 0009 08:04:17 Msec=2250 True Az=112.995 Ze=-79.29 Az status=0008 Ze status=0009 08:04:17 Check angles 08:04:17 SkyScan query 08:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.32<-15888 Statuses=0008 0009 08:04:18 Msec=3000 True Az=112.995 Ze=-58.32 Az status=0008 Ze status=0009 08:04:18 Check angles 08:04:18 SkyScan query 08:04:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.395<-14493 Statuses=0008 0009 08:04:19 Msec=3750 True Az=112.995 Ze=-37.395 Az status=0008 Ze status=0009 08:04:19 Check angles 08:04:19 SkyScan query 08:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.425<-13095 Statuses=0008 0009 08:04:20 Msec=4500 True Az=112.995 Ze=-16.425 Az status=0008 Ze status=0009 08:04:20 Check angles 08:04:20 SkyScan query 08:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.44<-11704 Statuses=0008 0009 08:04:20 Msec=5250 True Az=112.995 Ze=4.44 Az status=0008 Ze status=0009 08:04:20 Check angles 08:04:20 SkyScan query 08:04:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:04:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:04:21 Message to Master queued w/err=0: serial=81332 error=0 08:04:26 Received message from Master: op=Filter serial=81333 08:04:26 Color wheel filter change from 0 to 0 08:04:26 FLIGetFilterPos err=0 currentPosition=0 08:04:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:26 Filter is already there-color wheel unchanged 08:04:26 Received message from Master: op=Shutter serial=81334 08:04:26 Shutter LASER close 08:04:26 Received message from Camera: op=State serial=81336 08:04:26 GetSingleValue result=40 Value=cccccccc 08:04:26 SkyScan query 08:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:04:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:27 Parameters OK 08:04:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:27 Set A/D data flow result=40 08:04:27 Set A/D channel type result=40 08:04:27 Set A/D encoding result=40 08:04:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:27 Set channel filter=0.000000e+000 result=40 08:04:27 Config A/D Result=40 08:04:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:27 Get A/D filter: -9.255963e+061 result=40 08:04:27 Get A/D value=-858993460 result=40 08:04:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:27 Parameters OK 08:04:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:27 Set A/D data flow result=40 08:04:27 Set A/D channel type result=40 08:04:27 Set A/D encoding result=40 08:04:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:27 Set channel filter=0.000000e+000 result=40 08:04:27 Config A/D Result=40 08:04:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:27 Get A/D filter: -9.255963e+061 result=40 08:04:27 Get A/D value=-858993460 result=40 08:04:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:27 Aux= 08:04:27 Message to Camera, serial 81336 queued 08:05:04 Received message from Master: op=PointingHead serial=81349 08:05:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:05:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:05:04 Point started: ret=0 08:05:04 point_skyscan result=0 08:05:05 Check angles 08:05:05 SkyScan query 08:05:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:05:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:05:06 Message to Master queued w/err=0: serial=81349 error=0 08:05:11 Received message from Master: op=Filter serial=81350 08:05:11 Color wheel filter change from 0 to 0 08:05:11 FLIGetFilterPos err=0 currentPosition=0 08:05:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:11 Filter is already there-color wheel unchanged 08:05:11 Received message from Master: op=Shutter serial=81351 08:05:11 Shutter LASER close 08:05:11 Received message from Camera: op=State serial=81353 08:05:11 GetSingleValue result=40 Value=cccccccc 08:05:11 SkyScan query 08:05:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:05:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:11 Parameters OK 08:05:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:11 Set A/D data flow result=40 08:05:11 Set A/D channel type result=40 08:05:11 Set A/D encoding result=40 08:05:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:11 Set channel filter=0.000000e+000 result=40 08:05:11 Config A/D Result=40 08:05:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:11 Get A/D filter: -9.255963e+061 result=40 08:05:11 Get A/D value=-858993460 result=40 08:05:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:11 Parameters OK 08:05:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:11 Set A/D data flow result=40 08:05:11 Set A/D channel type result=40 08:05:11 Set A/D encoding result=40 08:05:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:11 Set channel filter=0.000000e+000 result=40 08:05:11 Config A/D Result=40 08:05:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:11 Get A/D filter: -9.255963e+061 result=40 08:05:11 Get A/D value=-858993460 result=40 08:05:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:11 Aux= 08:05:11 Message to Camera, serial 81353 queued 08:05:48 Received message from Master: op=PointingHead serial=81366 08:05:48 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:05:48 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:05:48 Point started: ret=0 08:05:48 point_skyscan result=0 08:05:49 Check angles 08:05:49 SkyScan query 08:05:50 SkyScan query done: ret=0 az=136.38<-9092 ze=-6.51<-12434 Statuses=0009 0008 08:05:50 Msec=0 True Az=136.38 Ze=-6.51 Az status=0009 Ze status=0008 08:05:50 Check angles 08:05:50 SkyScan query 08:05:51 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 08:05:51 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 08:05:51 Check angles 08:05:51 SkyScan query 08:05:51 SkyScan query done: ret=0 az=171.3<-11420 ze=-6.495<-12433 Statuses=0009 0008 08:05:51 Msec=1500 True Az=171.3 Ze=-6.495 Az status=0009 Ze status=0008 08:05:51 Check angles 08:05:51 SkyScan query 08:05:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:05:52 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:05:52 Message to Master queued w/err=0: serial=81366 error=0 08:05:57 Received message from Master: op=Filter serial=81367 08:05:57 Color wheel filter change from 0 to 0 08:05:57 FLIGetFilterPos err=0 currentPosition=0 08:05:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:57 Filter is already there-color wheel unchanged 08:05:57 Received message from Master: op=Shutter serial=81368 08:05:57 Shutter LASER close 08:05:57 Received message from Camera: op=State serial=81370 08:05:57 GetSingleValue result=40 Value=cccccccc 08:05:57 SkyScan query 08:05:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:05:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:58 Parameters OK 08:05:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:58 Set A/D data flow result=40 08:05:58 Set A/D channel type result=40 08:05:58 Set A/D encoding result=40 08:05:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:58 Set channel filter=0.000000e+000 result=40 08:05:58 Config A/D Result=40 08:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:58 Get A/D filter: -9.255963e+061 result=40 08:05:58 Get A/D value=-858993460 result=40 08:05:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:58 Parameters OK 08:05:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:58 Set A/D data flow result=40 08:05:58 Set A/D channel type result=40 08:05:58 Set A/D encoding result=40 08:05:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:58 Set channel filter=0.000000e+000 result=40 08:05:58 Config A/D Result=40 08:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:58 Get A/D filter: -9.255963e+061 result=40 08:05:58 Get A/D value=-858993460 result=40 08:05:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:58 Aux= 08:05:58 Message to Camera, serial 81370 queued 08:06:35 Received message from Master: op=PointingHead serial=81383 08:06:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:06:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:06:35 Point started: ret=0 08:06:35 point_skyscan result=0 08:06:36 Check angles 08:06:36 SkyScan query 08:06:36 SkyScan query done: ret=0 az=152.64<-10176 ze=6.51<-11566 Statuses=0009 0008 08:06:36 Msec=0 True Az=152.64 Ze=6.51 Az status=0009 Ze status=0008 08:06:37 Check angles 08:06:37 SkyScan query 08:06:37 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 08:06:37 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 08:06:37 Check angles 08:06:37 SkyScan query 08:06:38 SkyScan query done: ret=0 az=117.645<-7843 ze=6.495<-11567 Statuses=0009 0008 08:06:38 Msec=1500 True Az=117.645 Ze=6.495 Az status=0009 Ze status=0008 08:06:38 Check angles 08:06:38 SkyScan query 08:06:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:06:39 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:06:39 Message to Master queued w/err=0: serial=81383 error=0 08:06:44 Received message from Master: op=Filter serial=81384 08:06:44 Color wheel filter change from 0 to 0 08:06:44 FLIGetFilterPos err=0 currentPosition=0 08:06:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:44 Filter is already there-color wheel unchanged 08:06:44 Received message from Master: op=Shutter serial=81385 08:06:44 Shutter LASER close 08:06:44 Received message from Camera: op=State serial=81387 08:06:44 GetSingleValue result=40 Value=cccccccc 08:06:44 SkyScan query 08:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:06:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:44 Parameters OK 08:06:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:44 Set A/D data flow result=40 08:06:44 Set A/D channel type result=40 08:06:44 Set A/D encoding result=40 08:06:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:44 Set channel filter=0.000000e+000 result=40 08:06:44 Config A/D Result=40 08:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:44 Get A/D filter: -9.255963e+061 result=40 08:06:44 Get A/D value=-858993460 result=40 08:06:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:44 Parameters OK 08:06:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:44 Set A/D data flow result=40 08:06:44 Set A/D channel type result=40 08:06:44 Set A/D encoding result=40 08:06:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:44 Set channel filter=0.000000e+000 result=40 08:06:44 Config A/D Result=40 08:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:44 Get A/D filter: -9.255963e+061 result=40 08:06:44 Get A/D value=-858993460 result=40 08:06:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:44 Aux= 08:06:44 Message to Camera, serial 81387 queued 08:07:21 Received message from Master: op=PointingHead serial=81400 08:07:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:07:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:07:22 Point started: ret=0 08:07:22 point_skyscan result=0 08:07:22 Check angles 08:07:22 SkyScan query 08:07:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 08:07:23 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 08:07:23 Check angles 08:07:23 SkyScan query 08:07:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 08:07:24 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 08:07:24 Check angles 08:07:24 SkyScan query 08:07:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 08:07:24 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 08:07:25 Check angles 08:07:25 SkyScan query 08:07:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.935<-17729 Statuses=0008 0009 08:07:25 Msec=2250 True Az=112.995 Ze=-85.935 Az status=0008 Ze status=0009 08:07:25 Check angles 08:07:25 SkyScan query 08:07:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.86<-19124 Statuses=0008 0009 08:07:26 Msec=3000 True Az=112.995 Ze=-106.86 Az status=0008 Ze status=0009 08:07:26 Check angles 08:07:26 SkyScan query 08:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.83<-20522 Statuses=0008 0009 08:07:27 Msec=3750 True Az=112.995 Ze=-127.83 Az status=0008 Ze status=0009 08:07:27 Check angles 08:07:27 SkyScan query 08:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.77<-21918 Statuses=0008 0009 08:07:27 Msec=4500 True Az=112.995 Ze=-148.77 Az status=0008 Ze status=0009 08:07:28 Check angles 08:07:28 SkyScan query 08:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.16<-23344 Statuses=0008 0009 08:07:28 Msec=5250 True Az=112.995 Ze=-170.16 Az status=0008 Ze status=0009 08:07:28 Check angles 08:07:28 SkyScan query 08:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:07:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:07:29 Message to Master queued w/err=0: serial=81400 error=0 08:07:34 Received message from Master: op=Filter serial=81401 08:07:34 Color wheel filter change from 0 to 0 08:07:34 FLIGetFilterPos err=0 currentPosition=0 08:07:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:34 Filter is already there-color wheel unchanged 08:07:34 Received message from Master: op=Shutter serial=81402 08:07:34 Shutter LASER open 08:07:34 Received message from Camera: op=State serial=81404 08:07:34 GetSingleValue result=40 Value=cccccccc 08:07:34 SkyScan query 08:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:07:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:35 Parameters OK 08:07:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:35 Set A/D data flow result=40 08:07:35 Set A/D channel type result=40 08:07:35 Set A/D encoding result=40 08:07:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:35 Set channel filter=0.000000e+000 result=40 08:07:35 Config A/D Result=40 08:07:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:35 Get A/D filter: -9.255963e+061 result=40 08:07:35 Get A/D value=-858993460 result=40 08:07:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:35 Parameters OK 08:07:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:35 Set A/D data flow result=40 08:07:35 Set A/D channel type result=40 08:07:35 Set A/D encoding result=40 08:07:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:35 Set channel filter=0.000000e+000 result=40 08:07:35 Config A/D Result=40 08:07:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:35 Get A/D filter: -9.255963e+061 result=40 08:07:35 Get A/D value=-858993460 result=40 08:07:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:35 Aux= 08:07:35 Message to Camera, serial 81404 queued 08:07:43 Received message from Master: op=Shutter serial=81414 08:07:43 Shutter LASER close 08:07:44 Received message from Master: op=PointingHead serial=81418 08:07:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:07:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:07:44 Point started: ret=0 08:07:44 point_skyscan result=0 08:07:45 Check angles 08:07:45 SkyScan query 08:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 08:07:45 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 08:07:46 Check angles 08:07:46 SkyScan query 08:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.01<-20134 Statuses=0008 0009 08:07:46 Msec=750 True Az=112.995 Ze=-122.01 Az status=0008 Ze status=0009 08:07:46 Check angles 08:07:46 SkyScan query 08:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 08:07:47 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 08:07:47 Check angles 08:07:47 SkyScan query 08:07:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.68<-17312 Statuses=0008 0009 08:07:48 Msec=2250 True Az=112.995 Ze=-79.68 Az status=0008 Ze status=0009 08:07:48 Check angles 08:07:48 SkyScan query 08:07:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.74<-15916 Statuses=0008 0009 08:07:48 Msec=3000 True Az=112.995 Ze=-58.74 Az status=0008 Ze status=0009 08:07:49 Check angles 08:07:49 SkyScan query 08:07:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.35<-14490 Statuses=0008 0009 08:07:49 Msec=3750 True Az=112.995 Ze=-37.35 Az status=0008 Ze status=0009 08:07:49 Check angles 08:07:49 SkyScan query 08:07:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.365<-13091 Statuses=0008 0009 08:07:50 Msec=4500 True Az=112.995 Ze=-16.365 Az status=0008 Ze status=0009 08:07:50 Check angles 08:07:50 SkyScan query 08:07:51 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 08:07:51 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 08:07:51 Check angles 08:07:51 SkyScan query 08:07:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:07:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:07:51 Message to Master queued w/err=0: serial=81418 error=0 08:07:56 Received message from Master: op=Filter serial=81419 08:07:56 Color wheel filter change from 0 to 0 08:07:56 FLIGetFilterPos err=0 currentPosition=0 08:07:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:56 Filter is already there-color wheel unchanged 08:07:57 Received message from Master: op=Shutter serial=81420 08:07:57 Shutter LASER close 08:07:57 Received message from Camera: op=State serial=81422 08:07:57 GetSingleValue result=40 Value=cccccccc 08:07:57 SkyScan query 08:07:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:07:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:57 Parameters OK 08:07:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:57 Set A/D data flow result=40 08:07:57 Set A/D channel type result=40 08:07:57 Set A/D encoding result=40 08:07:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:57 Set channel filter=0.000000e+000 result=40 08:07:57 Config A/D Result=40 08:07:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:57 Get A/D filter: -9.255963e+061 result=40 08:07:57 Get A/D value=-858993460 result=40 08:07:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:57 Parameters OK 08:07:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:57 Set A/D data flow result=40 08:07:57 Set A/D channel type result=40 08:07:57 Set A/D encoding result=40 08:07:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:57 Set channel filter=0.000000e+000 result=40 08:07:57 Config A/D Result=40 08:07:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:57 Get A/D filter: -9.255963e+061 result=40 08:07:57 Get A/D value=-858993460 result=40 08:07:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:57 Aux= 08:07:57 Message to Camera, serial 81422 queued 08:08:34 Received message from Master: op=PointingHead serial=81435 08:08:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:08:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:08:35 Point started: ret=0 08:08:35 point_skyscan result=0 08:08:35 Check angles 08:08:35 SkyScan query 08:08:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:08:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:08:36 Message to Master queued w/err=0: serial=81435 error=0 08:08:41 Received message from Master: op=Filter serial=81436 08:08:41 Color wheel filter change from 0 to 0 08:08:41 FLIGetFilterPos err=0 currentPosition=0 08:08:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:41 Filter is already there-color wheel unchanged 08:08:41 Received message from Master: op=Shutter serial=81437 08:08:41 Shutter LASER close 08:08:41 Received message from Camera: op=State serial=81439 08:08:41 GetSingleValue result=40 Value=cccccccc 08:08:41 SkyScan query 08:08:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:08:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:42 Parameters OK 08:08:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:42 Set A/D data flow result=40 08:08:42 Set A/D channel type result=40 08:08:42 Set A/D encoding result=40 08:08:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:42 Set channel filter=0.000000e+000 result=40 08:08:42 Config A/D Result=40 08:08:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:42 Get A/D filter: -9.255963e+061 result=40 08:08:42 Get A/D value=-858993460 result=40 08:08:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:42 Parameters OK 08:08:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:42 Set A/D data flow result=40 08:08:42 Set A/D channel type result=40 08:08:42 Set A/D encoding result=40 08:08:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:42 Set channel filter=0.000000e+000 result=40 08:08:42 Config A/D Result=40 08:08:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:42 Get A/D filter: -9.255963e+061 result=40 08:08:42 Get A/D value=-858993460 result=40 08:08:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:42 Aux= 08:08:42 Message to Camera, serial 81439 queued 08:09:19 Received message from Master: op=PointingHead serial=81452 08:09:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:09:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:09:19 Point started: ret=0 08:09:19 point_skyscan result=0 08:09:20 Check angles 08:09:20 SkyScan query 08:09:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:09:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:09:20 Message to Master queued w/err=0: serial=81452 error=0 08:09:25 Received message from Master: op=Filter serial=81453 08:09:25 Color wheel filter change from 0 to 0 08:09:25 FLIGetFilterPos err=0 currentPosition=0 08:09:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:25 Filter is already there-color wheel unchanged 08:09:25 Received message from Master: op=Shutter serial=81454 08:09:25 Shutter LASER close 08:09:25 Received message from Camera: op=State serial=81456 08:09:25 GetSingleValue result=40 Value=cccccccc 08:09:25 SkyScan query 08:09:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:09:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:26 Parameters OK 08:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:26 Set A/D data flow result=40 08:09:26 Set A/D channel type result=40 08:09:26 Set A/D encoding result=40 08:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:26 Set channel filter=0.000000e+000 result=40 08:09:26 Config A/D Result=40 08:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:26 Get A/D filter: -9.255963e+061 result=40 08:09:26 Get A/D value=-858993460 result=40 08:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:26 Parameters OK 08:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:26 Set A/D data flow result=40 08:09:26 Set A/D channel type result=40 08:09:26 Set A/D encoding result=40 08:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:26 Set channel filter=0.000000e+000 result=40 08:09:26 Config A/D Result=40 08:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:26 Get A/D filter: -9.255963e+061 result=40 08:09:26 Get A/D value=-858993460 result=40 08:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:26 Aux= 08:09:26 Message to Camera, serial 81456 queued 08:10:03 Received message from Master: op=PointingHead serial=81469 08:10:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:10:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:10:03 Point started: ret=0 08:10:03 point_skyscan result=0 08:10:04 Check angles 08:10:04 SkyScan query 08:10:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:10:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:10:05 Message to Master queued w/err=0: serial=81469 error=0 08:10:10 Received message from Master: op=Filter serial=81470 08:10:10 Color wheel filter change from 0 to 0 08:10:10 FLIGetFilterPos err=0 currentPosition=0 08:10:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:10 Filter is already there-color wheel unchanged 08:10:10 Received message from Master: op=Shutter serial=81471 08:10:10 Shutter LASER close 08:10:10 Received message from Camera: op=State serial=81473 08:10:10 GetSingleValue result=40 Value=cccccccc 08:10:10 SkyScan query 08:10:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:10:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:10 Parameters OK 08:10:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:10 Set A/D data flow result=40 08:10:10 Set A/D channel type result=40 08:10:10 Set A/D encoding result=40 08:10:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:10 Set channel filter=0.000000e+000 result=40 08:10:10 Config A/D Result=40 08:10:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:10 Get A/D filter: -9.255963e+061 result=40 08:10:10 Get A/D value=-858993460 result=40 08:10:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:10 Parameters OK 08:10:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:10 Set A/D data flow result=40 08:10:10 Set A/D channel type result=40 08:10:10 Set A/D encoding result=40 08:10:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:10 Set channel filter=0.000000e+000 result=40 08:10:10 Config A/D Result=40 08:10:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:10 Get A/D filter: -9.255963e+061 result=40 08:10:10 Get A/D value=-858993460 result=40 08:10:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:10 Aux= 08:10:10 Message to Camera, serial 81473 queued 08:10:47 Received message from Master: op=PointingHead serial=81486 08:10:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:10:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:10:47 Point started: ret=0 08:10:47 point_skyscan result=0 08:10:48 Check angles 08:10:48 SkyScan query 08:10:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 08:10:49 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 08:10:49 Check angles 08:10:49 SkyScan query 08:10:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 08:10:50 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 08:10:50 Check angles 08:10:50 SkyScan query 08:10:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 08:10:50 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 08:10:50 Check angles 08:10:50 SkyScan query 08:10:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.58<-17772 Statuses=0008 0009 08:10:51 Msec=2250 True Az=112.995 Ze=-86.58 Az status=0008 Ze status=0009 08:10:51 Check angles 08:10:51 SkyScan query 08:10:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.55<-19170 Statuses=0008 0009 08:10:52 Msec=3000 True Az=112.995 Ze=-107.55 Az status=0008 Ze status=0009 08:10:52 Check angles 08:10:52 SkyScan query 08:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.475<-20565 Statuses=0008 0009 08:10:53 Msec=3750 True Az=112.995 Ze=-128.475 Az status=0008 Ze status=0009 08:10:53 Check angles 08:10:53 SkyScan query 08:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.445<-21963 Statuses=0008 0009 08:10:53 Msec=4500 True Az=112.995 Ze=-149.445 Az status=0008 Ze status=0009 08:10:53 Check angles 08:10:53 SkyScan query 08:10:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.385<-23359 Statuses=0008 0009 08:10:54 Msec=5250 True Az=112.995 Ze=-170.385 Az status=0008 Ze status=0009 08:10:54 Check angles 08:10:54 SkyScan query 08:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:10:55 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:10:55 Message to Master queued w/err=0: serial=81486 error=0 08:11:00 Received message from Master: op=Filter serial=81487 08:11:00 Color wheel filter change from 0 to 0 08:11:00 FLIGetFilterPos err=0 currentPosition=0 08:11:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:00 Filter is already there-color wheel unchanged 08:11:00 Received message from Master: op=Shutter serial=81488 08:11:00 Shutter LASER open 08:11:00 Received message from Camera: op=State serial=81490 08:11:00 GetSingleValue result=40 Value=cccccccc 08:11:00 SkyScan query 08:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:11:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:01 Parameters OK 08:11:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:01 Set A/D data flow result=40 08:11:01 Set A/D channel type result=40 08:11:01 Set A/D encoding result=40 08:11:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:01 Set channel filter=0.000000e+000 result=40 08:11:01 Config A/D Result=40 08:11:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:01 Get A/D filter: -9.255963e+061 result=40 08:11:01 Get A/D value=-858993460 result=40 08:11:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:01 Parameters OK 08:11:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:01 Set A/D data flow result=40 08:11:01 Set A/D channel type result=40 08:11:01 Set A/D encoding result=40 08:11:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:01 Set channel filter=0.000000e+000 result=40 08:11:01 Config A/D Result=40 08:11:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:01 Get A/D filter: -9.255963e+061 result=40 08:11:01 Get A/D value=-858993460 result=40 08:11:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:01 Aux= 08:11:01 Message to Camera, serial 81490 queued 08:11:09 Received message from Master: op=Shutter serial=81500 08:11:09 Shutter LASER close 08:11:10 Received message from Master: op=PointingHead serial=81504 08:11:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:11:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:11:10 Point started: ret=0 08:11:10 point_skyscan result=0 08:11:11 Check angles 08:11:11 SkyScan query 08:11:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 08:11:11 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 08:11:12 Check angles 08:11:12 SkyScan query 08:11:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.535<-20169 Statuses=0008 0009 08:11:12 Msec=750 True Az=112.995 Ze=-122.535 Az status=0008 Ze status=0009 08:11:12 Check angles 08:11:12 SkyScan query 08:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 08:11:13 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 08:11:13 Check angles 08:11:13 SkyScan query 08:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 08:11:14 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 08:11:14 Check angles 08:11:14 SkyScan query 08:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 08:11:14 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 08:11:15 Check angles 08:11:15 SkyScan query 08:11:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 08:11:15 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 08:11:15 Check angles 08:11:15 SkyScan query 08:11:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.325<-13155 Statuses=0008 0009 08:11:16 Msec=4500 True Az=112.995 Ze=-17.325 Az status=0008 Ze status=0009 08:11:16 Check angles 08:11:16 SkyScan query 08:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=3.63<-11758 Statuses=0008 0009 08:11:17 Msec=5250 True Az=112.995 Ze=3.63 Az status=0008 Ze status=0009 08:11:17 Check angles 08:11:17 SkyScan query 08:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:11:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:11:17 Message to Master queued w/err=0: serial=81504 error=0 08:11:22 Received message from Master: op=Filter serial=81505 08:11:22 Color wheel filter change from 0 to 0 08:11:22 FLIGetFilterPos err=0 currentPosition=0 08:11:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:22 Filter is already there-color wheel unchanged 08:11:23 Received message from Master: op=Shutter serial=81506 08:11:23 Shutter LASER close 08:11:23 Received message from Camera: op=State serial=81508 08:11:23 GetSingleValue result=40 Value=cccccccc 08:11:23 SkyScan query 08:11:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:11:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:23 Parameters OK 08:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:23 Set A/D data flow result=40 08:11:23 Set A/D channel type result=40 08:11:23 Set A/D encoding result=40 08:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:23 Set channel filter=0.000000e+000 result=40 08:11:23 Config A/D Result=40 08:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:23 Get A/D filter: -9.255963e+061 result=40 08:11:23 Get A/D value=-858993460 result=40 08:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:23 Parameters OK 08:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:23 Set A/D data flow result=40 08:11:23 Set A/D channel type result=40 08:11:23 Set A/D encoding result=40 08:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:23 Set channel filter=0.000000e+000 result=40 08:11:23 Config A/D Result=40 08:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:23 Get A/D filter: -9.255963e+061 result=40 08:11:23 Get A/D value=-858993460 result=40 08:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:23 Aux= 08:11:23 Message to Camera, serial 81508 queued 08:12:00 Received message from Master: op=PointingHead serial=81521 08:12:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:12:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:12:01 Point started: ret=0 08:12:01 point_skyscan result=0 08:12:01 Check angles 08:12:01 SkyScan query 08:12:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:12:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:12:02 Message to Master queued w/err=0: serial=81521 error=0 08:12:07 Received message from Master: op=Filter serial=81522 08:12:07 Color wheel filter change from 0 to 0 08:12:07 FLIGetFilterPos err=0 currentPosition=0 08:12:07 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:07 Filter is already there-color wheel unchanged 08:12:07 Received message from Master: op=Shutter serial=81523 08:12:07 Shutter LASER close 08:12:07 Received message from Camera: op=State serial=81525 08:12:07 GetSingleValue result=40 Value=cccccccc 08:12:07 SkyScan query 08:12:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:12:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:08 Parameters OK 08:12:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:08 Set A/D data flow result=40 08:12:08 Set A/D channel type result=40 08:12:08 Set A/D encoding result=40 08:12:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:08 Set channel filter=0.000000e+000 result=40 08:12:08 Config A/D Result=40 08:12:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:08 Get A/D filter: -9.255963e+061 result=40 08:12:08 Get A/D value=-858993460 result=40 08:12:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:08 Parameters OK 08:12:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:08 Set A/D data flow result=40 08:12:08 Set A/D channel type result=40 08:12:08 Set A/D encoding result=40 08:12:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:08 Set channel filter=0.000000e+000 result=40 08:12:08 Config A/D Result=40 08:12:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:08 Get A/D filter: -9.255963e+061 result=40 08:12:08 Get A/D value=-858993460 result=40 08:12:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:08 Aux= 08:12:08 Message to Camera, serial 81525 queued 08:12:45 Received message from Master: op=PointingHead serial=81538 08:12:45 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:12:45 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:12:45 Point started: ret=0 08:12:45 point_skyscan result=0 08:12:46 Check angles 08:12:46 SkyScan query 08:12:46 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 08:12:46 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 08:12:46 Check angles 08:12:46 SkyScan query 08:12:47 SkyScan query done: ret=0 az=153.585<-10239 ze=-6.495<-12433 Statuses=0009 0008 08:12:47 Msec=750 True Az=153.585 Ze=-6.495 Az status=0009 Ze status=0008 08:12:47 Check angles 08:12:47 SkyScan query 08:12:48 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 08:12:48 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 08:12:48 Check angles 08:12:48 SkyScan query 08:12:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:12:49 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:12:49 Message to Master queued w/err=0: serial=81538 error=0 08:12:54 Received message from Master: op=Filter serial=81539 08:12:54 Color wheel filter change from 0 to 0 08:12:54 FLIGetFilterPos err=0 currentPosition=0 08:12:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:54 Filter is already there-color wheel unchanged 08:12:54 Received message from Master: op=Shutter serial=81540 08:12:54 Shutter LASER close 08:12:54 Received message from Camera: op=State serial=81542 08:12:54 GetSingleValue result=40 Value=cccccccc 08:12:54 SkyScan query 08:12:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:12:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:54 Parameters OK 08:12:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:54 Set A/D data flow result=40 08:12:54 Set A/D channel type result=40 08:12:54 Set A/D encoding result=40 08:12:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:54 Set channel filter=0.000000e+000 result=40 08:12:54 Config A/D Result=40 08:12:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:54 Get A/D filter: -9.255963e+061 result=40 08:12:54 Get A/D value=-858993460 result=40 08:12:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:54 Parameters OK 08:12:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:54 Set A/D data flow result=40 08:12:54 Set A/D channel type result=40 08:12:54 Set A/D encoding result=40 08:12:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:54 Set channel filter=0.000000e+000 result=40 08:12:54 Config A/D Result=40 08:12:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:54 Get A/D filter: -9.255963e+061 result=40 08:12:54 Get A/D value=-858993460 result=40 08:12:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:54 Aux= 08:12:54 Message to Camera, serial 81542 queued 08:13:31 Received message from Master: op=PointingHead serial=81555 08:13:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:13:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:13:31 Point started: ret=0 08:13:31 point_skyscan result=0 08:13:32 Check angles 08:13:32 SkyScan query 08:13:33 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 08:13:33 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 08:13:33 Check angles 08:13:33 SkyScan query 08:13:34 SkyScan query done: ret=0 az=135.615<-9041 ze=6.495<-11567 Statuses=0009 0008 08:13:34 Msec=750 True Az=135.615 Ze=6.495 Az status=0009 Ze status=0008 08:13:34 Check angles 08:13:34 SkyScan query 08:13:34 SkyScan query done: ret=0 az=118.215<-7881 ze=6.495<-11567 Statuses=0009 0008 08:13:34 Msec=1500 True Az=118.215 Ze=6.495 Az status=0009 Ze status=0008 08:13:34 Check angles 08:13:34 SkyScan query 08:13:35 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 08:13:35 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 08:13:35 Message to Master queued w/err=0: serial=81555 error=0 08:13:40 Received message from Master: op=Filter serial=81556 08:13:40 Color wheel filter change from 0 to 0 08:13:40 FLIGetFilterPos err=0 currentPosition=0 08:13:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:40 Filter is already there-color wheel unchanged 08:13:40 Received message from Master: op=Shutter serial=81557 08:13:40 Shutter LASER close 08:13:40 Received message from Camera: op=State serial=81559 08:13:40 GetSingleValue result=40 Value=cccccccc 08:13:40 SkyScan query 08:13:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:13:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:41 Parameters OK 08:13:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:41 Set A/D data flow result=40 08:13:41 Set A/D channel type result=40 08:13:41 Set A/D encoding result=40 08:13:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:41 Set channel filter=0.000000e+000 result=40 08:13:41 Config A/D Result=40 08:13:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:41 Get A/D filter: -9.255963e+061 result=40 08:13:41 Get A/D value=-858993460 result=40 08:13:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:41 Parameters OK 08:13:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:41 Set A/D data flow result=40 08:13:41 Set A/D channel type result=40 [UTC 2019-3-3 08:13:41] 08:13:41 Set A/D encoding result=40 08:13:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:41 Set channel filter=0.000000e+000 result=40 08:13:41 Config A/D Result=40 08:13:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:41 Get A/D filter: -9.255963e+061 result=40 08:13:41 Get A/D value=-858993460 result=40 08:13:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:41 Aux= 08:13:41 Message to Camera, serial 81559 queued 08:14:18 Received message from Master: op=PointingHead serial=81572 08:14:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:14:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:14:18 Point started: ret=0 08:14:18 point_skyscan result=0 08:14:19 Check angles 08:14:19 SkyScan query 08:14:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 08:14:19 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 08:14:20 Check angles 08:14:20 SkyScan query 08:14:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 08:14:20 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 08:14:20 Check angles 08:14:20 SkyScan query 08:14:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 08:14:21 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 08:14:21 Check angles 08:14:21 SkyScan query 08:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 08:14:22 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 08:14:22 Check angles 08:14:22 SkyScan query 08:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.61<-19174 Statuses=0008 0009 08:14:22 Msec=3000 True Az=112.995 Ze=-107.61 Az status=0008 Ze status=0009 08:14:23 Check angles 08:14:23 SkyScan query 08:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.97<-20598 Statuses=0008 0009 08:14:23 Msec=3750 True Az=112.995 Ze=-128.97 Az status=0008 Ze status=0009 08:14:23 Check angles 08:14:23 SkyScan query 08:14:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.94<-21996 Statuses=0008 0009 08:14:24 Msec=4500 True Az=112.995 Ze=-149.94 Az status=0008 Ze status=0009 08:14:24 Check angles 08:14:24 SkyScan query 08:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.82<-23388 Statuses=0008 0009 08:14:25 Msec=5250 True Az=112.995 Ze=-170.82 Az status=0008 Ze status=0009 08:14:25 Check angles 08:14:25 SkyScan query 08:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:14:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:14:25 Message to Master queued w/err=0: serial=81572 error=0 08:14:30 Received message from Master: op=Filter serial=81573 08:14:30 Color wheel filter change from 0 to 0 08:14:30 FLIGetFilterPos err=0 currentPosition=0 08:14:30 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:30 Filter is already there-color wheel unchanged 08:14:31 Received message from Master: op=Shutter serial=81574 08:14:31 Shutter LASER open 08:14:31 Received message from Camera: op=State serial=81576 08:14:31 GetSingleValue result=40 Value=cccccccc 08:14:31 SkyScan query 08:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:14:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:31 Parameters OK 08:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:31 Set A/D data flow result=40 08:14:31 Set A/D channel type result=40 08:14:31 Set A/D encoding result=40 08:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:31 Set channel filter=0.000000e+000 result=40 08:14:31 Config A/D Result=40 08:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:31 Get A/D filter: -9.255963e+061 result=40 08:14:31 Get A/D value=-858993460 result=40 08:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:31 Parameters OK 08:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:31 Set A/D data flow result=40 08:14:31 Set A/D channel type result=40 08:14:31 Set A/D encoding result=40 08:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:31 Set channel filter=0.000000e+000 result=40 08:14:31 Config A/D Result=40 08:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:31 Get A/D filter: -9.255963e+061 result=40 08:14:31 Get A/D value=-858993460 result=40 08:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:31 Aux= 08:14:31 Message to Camera, serial 81576 queued 08:14:40 Received message from Master: op=Shutter serial=81586 08:14:40 Shutter LASER close 08:14:40 Received message from Master: op=PointingHead serial=81590 08:14:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:14:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:14:41 Point started: ret=0 08:14:41 point_skyscan result=0 08:14:41 Check angles 08:14:41 SkyScan query 08:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 08:14:42 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 08:14:42 Check angles 08:14:42 SkyScan query 08:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 08:14:43 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 08:14:43 Check angles 08:14:43 SkyScan query 08:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 08:14:43 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 08:14:44 Check angles 08:14:44 SkyScan query 08:14:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 08:14:44 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 08:14:44 Check angles 08:14:44 SkyScan query 08:14:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 08:14:45 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 08:14:45 Check angles 08:14:45 SkyScan query 08:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 08:14:46 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 08:14:46 Check angles 08:14:46 SkyScan query 08:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 08:14:46 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 08:14:47 Check angles 08:14:47 SkyScan query 08:14:47 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 08:14:47 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 08:14:47 Check angles 08:14:47 SkyScan query 08:14:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:14:48 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:14:48 Message to Master queued w/err=0: serial=81590 error=0 08:14:53 Received message from Master: op=Filter serial=81591 08:14:53 Color wheel filter change from 0 to 0 08:14:53 FLIGetFilterPos err=0 currentPosition=0 08:14:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:53 Filter is already there-color wheel unchanged 08:14:53 Received message from Master: op=Shutter serial=81592 08:14:53 Shutter LASER close 08:14:53 Received message from Camera: op=State serial=81594 08:14:53 GetSingleValue result=40 Value=cccccccc 08:14:53 SkyScan query 08:14:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:14:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:54 Parameters OK 08:14:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:54 Set A/D data flow result=40 08:14:54 Set A/D channel type result=40 08:14:54 Set A/D encoding result=40 08:14:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:54 Set channel filter=0.000000e+000 result=40 08:14:54 Config A/D Result=40 08:14:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:54 Get A/D filter: -9.255963e+061 result=40 08:14:54 Get A/D value=-858993460 result=40 08:14:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:54 Parameters OK 08:14:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:54 Set A/D data flow result=40 08:14:54 Set A/D channel type result=40 08:14:54 Set A/D encoding result=40 08:14:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:54 Set channel filter=0.000000e+000 result=40 08:14:54 Config A/D Result=40 08:14:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:54 Get A/D filter: -9.255963e+061 result=40 08:14:54 Get A/D value=-858993460 result=40 08:14:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:54 Aux= 08:14:54 Message to Camera, serial 81594 queued 08:15:31 Received message from Master: op=PointingHead serial=81607 08:15:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:15:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:15:31 Point started: ret=0 08:15:31 point_skyscan result=0 08:15:32 Check angles 08:15:32 SkyScan query 08:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:15:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:15:32 Message to Master queued w/err=0: serial=81607 error=0 08:15:37 Received message from Master: op=Filter serial=81608 08:15:37 Color wheel filter change from 0 to 0 08:15:37 FLIGetFilterPos err=0 currentPosition=0 08:15:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:37 Filter is already there-color wheel unchanged 08:15:38 Received message from Master: op=Shutter serial=81609 08:15:38 Shutter LASER close 08:15:38 Received message from Camera: op=State serial=81611 08:15:38 GetSingleValue result=40 Value=cccccccc 08:15:38 SkyScan query 08:15:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:15:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:38 Parameters OK 08:15:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:38 Set A/D data flow result=40 08:15:38 Set A/D channel type result=40 08:15:38 Set A/D encoding result=40 08:15:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:38 Set channel filter=0.000000e+000 result=40 08:15:38 Config A/D Result=40 08:15:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:38 Get A/D filter: -9.255963e+061 result=40 08:15:38 Get A/D value=-858993460 result=40 08:15:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:38 Parameters OK 08:15:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:38 Set A/D data flow result=40 08:15:38 Set A/D channel type result=40 08:15:38 Set A/D encoding result=40 08:15:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:38 Set channel filter=0.000000e+000 result=40 08:15:38 Config A/D Result=40 08:15:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:38 Get A/D filter: -9.255963e+061 result=40 08:15:38 Get A/D value=-858993460 result=40 08:15:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:38 Aux= 08:15:38 Message to Camera, serial 81611 queued 08:16:15 Received message from Master: op=PointingHead serial=81624 08:16:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:16:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:16:15 Point started: ret=0 08:16:15 point_skyscan result=0 08:16:16 Check angles 08:16:16 SkyScan query 08:16:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:16:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:16:17 Message to Master queued w/err=0: serial=81624 error=0 08:16:22 Received message from Master: op=Filter serial=81625 08:16:22 Color wheel filter change from 0 to 0 08:16:22 FLIGetFilterPos err=0 currentPosition=0 08:16:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:22 Filter is already there-color wheel unchanged 08:16:22 Received message from Master: op=Shutter serial=81626 08:16:22 Shutter LASER close 08:16:22 Received message from Camera: op=State serial=81628 08:16:22 GetSingleValue result=40 Value=cccccccc 08:16:22 SkyScan query 08:16:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:16:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:22 Parameters OK 08:16:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:22 Set A/D data flow result=40 08:16:22 Set A/D channel type result=40 08:16:22 Set A/D encoding result=40 08:16:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:22 Set channel filter=0.000000e+000 result=40 08:16:22 Config A/D Result=40 08:16:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:22 Get A/D filter: -9.255963e+061 result=40 08:16:22 Get A/D value=-858993460 result=40 08:16:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:22 Parameters OK 08:16:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:22 Set A/D data flow result=40 08:16:22 Set A/D channel type result=40 08:16:22 Set A/D encoding result=40 08:16:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:22 Set channel filter=0.000000e+000 result=40 08:16:22 Config A/D Result=40 08:16:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:22 Get A/D filter: -9.255963e+061 result=40 08:16:22 Get A/D value=-858993460 result=40 08:16:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:22 Aux= 08:16:22 Message to Camera, serial 81628 queued 08:16:59 Received message from Master: op=PointingHead serial=81641 08:16:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:16:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:17:00 Point started: ret=0 08:17:00 point_skyscan result=0 08:17:00 Check angles 08:17:00 SkyScan query 08:17:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:17:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:17:01 Message to Master queued w/err=0: serial=81641 error=0 08:17:06 Received message from Master: op=Filter serial=81642 08:17:06 Color wheel filter change from 0 to 0 08:17:06 FLIGetFilterPos err=0 currentPosition=0 08:17:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:06 Filter is already there-color wheel unchanged 08:17:06 Received message from Master: op=Shutter serial=81643 08:17:06 Shutter LASER close 08:17:06 Received message from Camera: op=State serial=81645 08:17:06 GetSingleValue result=40 Value=cccccccc 08:17:06 SkyScan query 08:17:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:17:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:07 Parameters OK 08:17:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:07 Set A/D data flow result=40 08:17:07 Set A/D channel type result=40 08:17:07 Set A/D encoding result=40 08:17:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:07 Set channel filter=0.000000e+000 result=40 08:17:07 Config A/D Result=40 08:17:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:07 Get A/D filter: -9.255963e+061 result=40 08:17:07 Get A/D value=-858993460 result=40 08:17:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:07 Parameters OK 08:17:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:07 Set A/D data flow result=40 08:17:07 Set A/D channel type result=40 08:17:07 Set A/D encoding result=40 08:17:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:07 Set channel filter=0.000000e+000 result=40 08:17:07 Config A/D Result=40 08:17:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:07 Get A/D filter: -9.255963e+061 result=40 08:17:07 Get A/D value=-858993460 result=40 08:17:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:07 Aux= 08:17:07 Message to Camera, serial 81645 queued 08:17:44 Received message from Master: op=PointingHead serial=81658 08:17:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:17:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:17:44 Point started: ret=0 08:17:44 point_skyscan result=0 08:17:45 Check angles 08:17:45 SkyScan query 08:17:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 08:17:45 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 08:17:46 Check angles 08:17:46 SkyScan query 08:17:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 08:17:46 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 08:17:46 Check angles 08:17:46 SkyScan query 08:17:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.88<-16392 Statuses=0008 0009 08:17:47 Msec=1500 True Az=112.995 Ze=-65.88 Az status=0008 Ze status=0009 08:17:47 Check angles 08:17:47 SkyScan query 08:17:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 08:17:48 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 08:17:48 Check angles 08:17:48 SkyScan query 08:17:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.775<-19185 Statuses=0008 0009 08:17:48 Msec=3000 True Az=112.995 Ze=-107.775 Az status=0008 Ze status=0009 08:17:49 Check angles 08:17:49 SkyScan query 08:17:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 08:17:49 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 08:17:49 Check angles 08:17:49 SkyScan query 08:17:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 08:17:50 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 08:17:50 Check angles 08:17:50 SkyScan query 08:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.94<-23396 Statuses=0008 0009 08:17:51 Msec=5250 True Az=112.995 Ze=-170.94 Az status=0008 Ze status=0009 08:17:51 Check angles 08:17:51 SkyScan query 08:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:17:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:17:51 Message to Master queued w/err=0: serial=81658 error=0 08:17:56 Received message from Master: op=Filter serial=81659 08:17:56 Color wheel filter change from 0 to 0 08:17:56 FLIGetFilterPos err=0 currentPosition=0 08:17:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:56 Filter is already there-color wheel unchanged 08:17:57 Received message from Master: op=Shutter serial=81660 08:17:57 Shutter LASER open 08:17:57 Received message from Camera: op=State serial=81662 08:17:57 GetSingleValue result=40 Value=cccccccc 08:17:57 SkyScan query 08:17:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:17:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:57 Parameters OK 08:17:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:57 Set A/D data flow result=40 08:17:57 Set A/D channel type result=40 08:17:57 Set A/D encoding result=40 08:17:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:57 Set channel filter=0.000000e+000 result=40 08:17:57 Config A/D Result=40 08:17:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:57 Get A/D filter: -9.255963e+061 result=40 08:17:57 Get A/D value=-858993460 result=40 08:17:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:57 Parameters OK 08:17:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:57 Set A/D data flow result=40 08:17:57 Set A/D channel type result=40 08:17:57 Set A/D encoding result=40 08:17:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:57 Set channel filter=0.000000e+000 result=40 08:17:57 Config A/D Result=40 08:17:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:57 Get A/D filter: -9.255963e+061 result=40 08:17:57 Get A/D value=-858993460 result=40 08:17:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:57 Aux= 08:17:57 Message to Camera, serial 81662 queued 08:18:06 Received message from Master: op=Shutter serial=81672 08:18:06 Shutter LASER close 08:18:06 Received message from Master: op=PointingHead serial=81676 08:18:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:18:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:18:07 Point started: ret=0 08:18:07 point_skyscan result=0 08:18:07 Check angles 08:18:07 SkyScan query 08:18:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 08:18:08 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 08:18:08 Check angles 08:18:08 SkyScan query 08:18:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.455<-20097 Statuses=0008 0009 08:18:09 Msec=750 True Az=112.995 Ze=-121.455 Az status=0008 Ze status=0009 08:18:09 Check angles 08:18:09 SkyScan query 08:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 08:18:10 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 08:18:10 Check angles 08:18:10 SkyScan query 08:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.545<-17303 Statuses=0008 0009 08:18:10 Msec=2250 True Az=112.995 Ze=-79.545 Az status=0008 Ze status=0009 08:18:10 Check angles 08:18:10 SkyScan query 08:18:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 08:18:11 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 08:18:11 Check angles 08:18:11 SkyScan query 08:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 08:18:12 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 08:18:12 Check angles 08:18:12 SkyScan query 08:18:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.23<-13082 Statuses=0008 0009 08:18:13 Msec=4500 True Az=112.995 Ze=-16.23 Az status=0008 Ze status=0009 08:18:13 Check angles 08:18:13 SkyScan query 08:18:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.59<-11694 Statuses=0008 0009 08:18:13 Msec=5250 True Az=112.995 Ze=4.59 Az status=0008 Ze status=0009 08:18:13 Check angles 08:18:13 SkyScan query 08:18:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:18:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:18:14 Message to Master queued w/err=0: serial=81676 error=0 08:18:19 Received message from Master: op=Filter serial=81677 08:18:19 Color wheel filter change from 0 to 0 08:18:19 FLIGetFilterPos err=0 currentPosition=0 08:18:19 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:19 Filter is already there-color wheel unchanged 08:18:19 Received message from Master: op=Shutter serial=81678 08:18:19 Shutter LASER close 08:18:19 Received message from Camera: op=State serial=81680 08:18:19 GetSingleValue result=40 Value=cccccccc 08:18:19 SkyScan query 08:18:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:18:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:20 Parameters OK 08:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:20 Set A/D data flow result=40 08:18:20 Set A/D channel type result=40 08:18:20 Set A/D encoding result=40 08:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:20 Set channel filter=0.000000e+000 result=40 08:18:20 Config A/D Result=40 08:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:20 Get A/D filter: -9.255963e+061 result=40 08:18:20 Get A/D value=-858993460 result=40 08:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:20 Parameters OK 08:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:20 Set A/D data flow result=40 08:18:20 Set A/D channel type result=40 08:18:20 Set A/D encoding result=40 08:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:20 Set channel filter=0.000000e+000 result=40 08:18:20 Config A/D Result=40 08:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:20 Get A/D filter: -9.255963e+061 result=40 08:18:20 Get A/D value=-858993460 result=40 08:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:20 Aux= 08:18:20 Message to Camera, serial 81680 queued 08:18:57 Received message from Master: op=PointingHead serial=81693 08:18:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:18:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:18:57 Point started: ret=0 08:18:57 point_skyscan result=0 08:18:58 Check angles 08:18:58 SkyScan query 08:18:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:18:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:18:58 Message to Master queued w/err=0: serial=81693 error=0 08:19:03 Received message from Master: op=Filter serial=81694 08:19:03 Color wheel filter change from 0 to 0 08:19:03 FLIGetFilterPos err=0 currentPosition=0 08:19:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:03 Filter is already there-color wheel unchanged 08:19:04 Received message from Master: op=Shutter serial=81695 08:19:04 Shutter LASER close 08:19:04 Received message from Camera: op=State serial=81697 08:19:04 GetSingleValue result=40 Value=cccccccc 08:19:04 SkyScan query 08:19:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:19:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:04 Parameters OK 08:19:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:04 Set A/D data flow result=40 08:19:04 Set A/D channel type result=40 08:19:04 Set A/D encoding result=40 08:19:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:04 Set channel filter=0.000000e+000 result=40 08:19:04 Config A/D Result=40 08:19:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:04 Get A/D filter: -9.255963e+061 result=40 08:19:04 Get A/D value=-858993460 result=40 08:19:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:04 Parameters OK 08:19:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:04 Set A/D data flow result=40 08:19:04 Set A/D channel type result=40 08:19:04 Set A/D encoding result=40 08:19:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:04 Set channel filter=0.000000e+000 result=40 08:19:04 Config A/D Result=40 08:19:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:04 Get A/D filter: -9.255963e+061 result=40 08:19:04 Get A/D value=-858993460 result=40 08:19:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:04 Aux= 08:19:04 Message to Camera, serial 81697 queued 08:19:41 Received message from Master: op=PointingHead serial=81710 08:19:41 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:19:41 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:19:41 Point started: ret=0 08:19:41 point_skyscan result=0 08:19:42 Check angles 08:19:42 SkyScan query 08:19:43 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 08:19:43 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 08:19:43 Check angles 08:19:43 SkyScan query 08:19:44 SkyScan query done: ret=0 az=153.69<-10246 ze=-6.495<-12433 Statuses=0009 0008 08:19:44 Msec=750 True Az=153.69 Ze=-6.495 Az status=0009 Ze status=0008 08:19:44 Check angles 08:19:44 SkyScan query 08:19:44 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 08:19:44 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 08:19:44 Check angles 08:19:44 SkyScan query 08:19:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:19:45 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:19:45 Message to Master queued w/err=0: serial=81710 error=0 08:19:50 Received message from Master: op=Filter serial=81711 08:19:50 Color wheel filter change from 0 to 0 08:19:50 FLIGetFilterPos err=0 currentPosition=0 08:19:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:50 Filter is already there-color wheel unchanged 08:19:50 Received message from Master: op=Shutter serial=81712 08:19:50 Shutter LASER close 08:19:50 Received message from Camera: op=State serial=81714 08:19:50 GetSingleValue result=40 Value=cccccccc 08:19:50 SkyScan query 08:19:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:19:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:51 Parameters OK 08:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:51 Set A/D data flow result=40 08:19:51 Set A/D channel type result=40 08:19:51 Set A/D encoding result=40 08:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:51 Set channel filter=0.000000e+000 result=40 08:19:51 Config A/D Result=40 08:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:51 Get A/D filter: -9.255963e+061 result=40 08:19:51 Get A/D value=-858993460 result=40 08:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:51 Parameters OK 08:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:51 Set A/D data flow result=40 08:19:51 Set A/D channel type result=40 08:19:51 Set A/D encoding result=40 08:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:51 Set channel filter=0.000000e+000 result=40 08:19:51 Config A/D Result=40 08:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:51 Get A/D filter: -9.255963e+061 result=40 08:19:51 Get A/D value=-858993460 result=40 08:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:51 Aux= 08:19:51 Message to Camera, serial 81714 queued 08:20:28 Received message from Master: op=PointingHead serial=81727 08:20:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:20:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:20:28 Point started: ret=0 08:20:28 point_skyscan result=0 08:20:29 Check angles 08:20:29 SkyScan query 08:20:29 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 08:20:29 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 08:20:30 Check angles 08:20:30 SkyScan query 08:20:30 SkyScan query done: ret=0 az=134.79<-8986 ze=6.495<-11567 Statuses=0009 0008 08:20:30 Msec=750 True Az=134.79 Ze=6.495 Az status=0009 Ze status=0008 08:20:30 Check angles 08:20:30 SkyScan query 08:20:31 SkyScan query done: ret=0 az=117.345<-7823 ze=6.495<-11567 Statuses=0009 0008 08:20:31 Msec=1500 True Az=117.345 Ze=6.495 Az status=0009 Ze status=0008 08:20:31 Check angles 08:20:31 SkyScan query 08:20:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:20:32 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:20:32 Message to Master queued w/err=0: serial=81727 error=0 08:20:37 Received message from Master: op=Filter serial=81728 08:20:37 Color wheel filter change from 0 to 0 08:20:37 FLIGetFilterPos err=0 currentPosition=0 08:20:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:37 Filter is already there-color wheel unchanged 08:20:37 Received message from Master: op=Shutter serial=81729 08:20:37 Shutter LASER close 08:20:37 Received message from Camera: op=State serial=81731 08:20:37 GetSingleValue result=40 Value=cccccccc 08:20:37 SkyScan query 08:20:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:20:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:37 Parameters OK 08:20:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:37 Set A/D data flow result=40 08:20:37 Set A/D channel type result=40 08:20:37 Set A/D encoding result=40 08:20:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:37 Set channel filter=0.000000e+000 result=40 08:20:37 Config A/D Result=40 08:20:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:37 Get A/D filter: -9.255963e+061 result=40 08:20:37 Get A/D value=-858993460 result=40 08:20:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:37 Parameters OK 08:20:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:37 Set A/D data flow result=40 08:20:37 Set A/D channel type result=40 08:20:37 Set A/D encoding result=40 08:20:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:37 Set channel filter=0.000000e+000 result=40 08:20:37 Config A/D Result=40 08:20:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:37 Get A/D filter: -9.255963e+061 result=40 08:20:37 Get A/D value=-858993460 result=40 08:20:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:37 Aux= 08:20:37 Message to Camera, serial 81731 queued 08:21:14 Received message from Master: op=PointingHead serial=81744 08:21:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:21:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:21:15 Point started: ret=0 08:21:15 point_skyscan result=0 08:21:15 Check angles 08:21:15 SkyScan query 08:21:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 08:21:16 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 08:21:16 Check angles 08:21:16 SkyScan query 08:21:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.03<-15002 Statuses=0008 0009 08:21:17 Msec=750 True Az=112.995 Ze=-45.03 Az status=0008 Ze status=0009 08:21:17 Check angles 08:21:17 SkyScan query 08:21:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.865<-16391 Statuses=0008 0009 08:21:17 Msec=1500 True Az=112.995 Ze=-65.865 Az status=0008 Ze status=0009 08:21:18 Check angles 08:21:18 SkyScan query 08:21:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.79<-17786 Statuses=0008 0009 08:21:18 Msec=2250 True Az=112.995 Ze=-86.79 Az status=0008 Ze status=0009 08:21:18 Check angles 08:21:18 SkyScan query 08:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.76<-19184 Statuses=0008 0009 08:21:19 Msec=3000 True Az=112.995 Ze=-107.76 Az status=0008 Ze status=0009 08:21:19 Check angles 08:21:19 SkyScan query 08:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.685<-20579 Statuses=0008 0009 08:21:20 Msec=3750 True Az=112.995 Ze=-128.685 Az status=0008 Ze status=0009 08:21:20 Check angles 08:21:20 SkyScan query 08:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.655<-21977 Statuses=0008 0009 08:21:20 Msec=4500 True Az=112.995 Ze=-149.655 Az status=0008 Ze status=0009 08:21:21 Check angles 08:21:21 SkyScan query 08:21:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.58<-23372 Statuses=0008 0009 08:21:21 Msec=5250 True Az=112.995 Ze=-170.58 Az status=0008 Ze status=0009 08:21:21 Check angles 08:21:21 SkyScan query 08:21:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:21:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:21:22 Message to Master queued w/err=0: serial=81744 error=0 08:21:27 Received message from Master: op=Filter serial=81745 08:21:27 Color wheel filter change from 0 to 0 08:21:27 FLIGetFilterPos err=0 currentPosition=0 08:21:27 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:27 Filter is already there-color wheel unchanged 08:21:27 Received message from Master: op=Shutter serial=81746 08:21:27 Shutter LASER open 08:21:27 Received message from Camera: op=State serial=81748 08:21:27 GetSingleValue result=40 Value=cccccccc 08:21:27 SkyScan query 08:21:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:21:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:28 Parameters OK 08:21:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:28 Set A/D data flow result=40 08:21:28 Set A/D channel type result=40 08:21:28 Set A/D encoding result=40 08:21:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:28 Set channel filter=0.000000e+000 result=40 08:21:28 Config A/D Result=40 08:21:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:28 Get A/D filter: -9.255963e+061 result=40 08:21:28 Get A/D value=-858993460 result=40 08:21:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:28 Parameters OK 08:21:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:28 Set A/D data flow result=40 08:21:28 Set A/D channel type result=40 08:21:28 Set A/D encoding result=40 08:21:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:28 Set channel filter=0.000000e+000 result=40 08:21:28 Config A/D Result=40 08:21:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:28 Get A/D filter: -9.255963e+061 result=40 08:21:28 Get A/D value=-858993460 result=40 08:21:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:28 Aux= 08:21:28 Message to Camera, serial 81748 queued 08:21:36 Received message from Master: op=Shutter serial=81758 08:21:36 Shutter LASER close 08:21:37 Received message from Master: op=PointingHead serial=81762 08:21:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:21:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:21:37 Point started: ret=0 08:21:37 point_skyscan result=0 08:21:38 Check angles 08:21:38 SkyScan query 08:21:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.535<-21569 Statuses=0008 0009 08:21:38 Msec=0 True Az=112.995 Ze=-143.535 Az status=0008 Ze status=0009 08:21:39 Check angles 08:21:39 SkyScan query 08:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 08:21:39 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 08:21:39 Check angles 08:21:39 SkyScan query 08:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.61<-18774 Statuses=0008 0009 08:21:40 Msec=1500 True Az=112.995 Ze=-101.61 Az status=0008 Ze status=0009 08:21:40 Check angles 08:21:40 SkyScan query 08:21:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 08:21:41 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 08:21:41 Check angles 08:21:41 SkyScan query 08:21:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.265<-15951 Statuses=0008 0009 08:21:41 Msec=3000 True Az=112.995 Ze=-59.265 Az status=0008 Ze status=0009 08:21:42 Check angles 08:21:42 SkyScan query 08:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.295<-14553 Statuses=0008 0009 08:21:42 Msec=3750 True Az=112.995 Ze=-38.295 Az status=0008 Ze status=0009 08:21:42 Check angles 08:21:42 SkyScan query 08:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 08:21:43 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 08:21:43 Check angles 08:21:43 SkyScan query 08:21:44 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 08:21:44 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 08:21:44 Check angles 08:21:44 SkyScan query 08:21:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:21:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:21:44 Message to Master queued w/err=0: serial=81762 error=0 08:21:49 Received message from Master: op=Filter serial=81763 08:21:49 Color wheel filter change from 0 to 0 08:21:49 FLIGetFilterPos err=0 currentPosition=0 08:21:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:49 Filter is already there-color wheel unchanged 08:21:50 Received message from Master: op=Shutter serial=81764 08:21:50 Shutter LASER close 08:21:50 Received message from Camera: op=State serial=81766 08:21:50 GetSingleValue result=40 Value=cccccccc 08:21:50 SkyScan query 08:21:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:21:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:50 Parameters OK 08:21:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:50 Set A/D data flow result=40 08:21:50 Set A/D channel type result=40 08:21:50 Set A/D encoding result=40 08:21:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:50 Set channel filter=0.000000e+000 result=40 08:21:50 Config A/D Result=40 08:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:50 Get A/D filter: -9.255963e+061 result=40 08:21:50 Get A/D value=-858993460 result=40 08:21:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:50 Parameters OK 08:21:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:50 Set A/D data flow result=40 08:21:50 Set A/D channel type result=40 08:21:50 Set A/D encoding result=40 08:21:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:50 Set channel filter=0.000000e+000 result=40 08:21:50 Config A/D Result=40 08:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:50 Get A/D filter: -9.255963e+061 result=40 08:21:50 Get A/D value=-858993460 result=40 08:21:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:50 Aux= 08:21:50 Message to Camera, serial 81766 queued 08:22:26 Received message from Master: op=PointingHead serial=81778 08:22:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:22:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:22:27 Point started: ret=0 08:22:27 point_skyscan result=0 08:22:27 Check angles 08:22:27 SkyScan query 08:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:22:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:22:28 Message to Master queued w/err=0: serial=81778 error=0 08:22:33 Received message from Master: op=Filter serial=81779 08:22:33 Color wheel filter change from 0 to 0 08:22:33 FLIGetFilterPos err=0 currentPosition=0 08:22:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:33 Filter is already there-color wheel unchanged 08:22:33 Received message from Master: op=Shutter serial=81780 08:22:33 Shutter LASER close 08:22:33 Received message from Camera: op=State serial=81782 08:22:33 GetSingleValue result=40 Value=cccccccc 08:22:33 SkyScan query 08:22:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:22:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:34 Parameters OK 08:22:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:34 Set A/D data flow result=40 08:22:34 Set A/D channel type result=40 08:22:34 Set A/D encoding result=40 08:22:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:34 Set channel filter=0.000000e+000 result=40 08:22:34 Config A/D Result=40 08:22:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:34 Get A/D filter: -9.255963e+061 result=40 08:22:34 Get A/D value=-858993460 result=40 08:22:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:34 Parameters OK 08:22:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:34 Set A/D data flow result=40 08:22:34 Set A/D channel type result=40 08:22:34 Set A/D encoding result=40 08:22:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:34 Set channel filter=0.000000e+000 result=40 08:22:34 Config A/D Result=40 08:22:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:34 Get A/D filter: -9.255963e+061 result=40 08:22:34 Get A/D value=-858993460 result=40 08:22:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:34 Aux= 08:22:34 Message to Camera, serial 81782 queued 08:23:11 Received message from Master: op=PointingHead serial=81795 08:23:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:23:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:23:11 Point started: ret=0 08:23:11 point_skyscan result=0 08:23:12 Check angles 08:23:12 SkyScan query 08:23:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:23:12 Message to Master queued w/err=0: serial=81795 error=0 08:23:17 Received message from Master: op=Filter serial=81796 08:23:17 Color wheel filter change from 0 to 0 08:23:17 FLIGetFilterPos err=0 currentPosition=0 08:23:17 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:17 Filter is already there-color wheel unchanged 08:23:17 Received message from Master: op=Shutter serial=81797 08:23:17 Shutter LASER close 08:23:17 Received message from Camera: op=State serial=81799 08:23:17 GetSingleValue result=40 Value=cccccccc 08:23:17 SkyScan query 08:23:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:18 Parameters OK 08:23:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:18 Set A/D data flow result=40 08:23:18 Set A/D channel type result=40 08:23:18 Set A/D encoding result=40 08:23:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:18 Set channel filter=0.000000e+000 result=40 08:23:18 Config A/D Result=40 08:23:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:18 Get A/D filter: -9.255963e+061 result=40 08:23:18 Get A/D value=-858993460 result=40 08:23:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:18 Parameters OK 08:23:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:18 Set A/D data flow result=40 08:23:18 Set A/D channel type result=40 08:23:18 Set A/D encoding result=40 08:23:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:18 Set channel filter=0.000000e+000 result=40 08:23:18 Config A/D Result=40 08:23:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:18 Get A/D filter: -9.255963e+061 result=40 08:23:18 Get A/D value=-858993460 result=40 08:23:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:18 Aux= 08:23:18 Message to Camera, serial 81799 queued [UTC 2019-3-3 08:23:50] 08:23:55 Received message from Master: op=PointingHead serial=81812 08:23:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:23:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:23:55 Point started: ret=0 08:23:55 point_skyscan result=0 08:23:56 Check angles 08:23:56 SkyScan query 08:23:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:23:57 Message to Master queued w/err=0: serial=81812 error=0 08:24:02 Received message from Master: op=Filter serial=81813 08:24:02 Color wheel filter change from 0 to 0 08:24:02 FLIGetFilterPos err=0 currentPosition=0 08:24:02 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:02 Filter is already there-color wheel unchanged 08:24:02 Received message from Master: op=Shutter serial=81814 08:24:02 Shutter LASER close 08:24:02 Received message from Camera: op=State serial=81816 08:24:02 GetSingleValue result=40 Value=cccccccc 08:24:02 SkyScan query 08:24:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:24:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:02 Parameters OK 08:24:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:02 Set A/D data flow result=40 08:24:02 Set A/D channel type result=40 08:24:02 Set A/D encoding result=40 08:24:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:02 Set channel filter=0.000000e+000 result=40 08:24:02 Config A/D Result=40 08:24:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:02 Get A/D filter: -9.255963e+061 result=40 08:24:02 Get A/D value=-858993460 result=40 08:24:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:02 Parameters OK 08:24:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:02 Set A/D data flow result=40 08:24:02 Set A/D channel type result=40 08:24:02 Set A/D encoding result=40 08:24:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:02 Set channel filter=0.000000e+000 result=40 08:24:02 Config A/D Result=40 08:24:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:02 Get A/D filter: -9.255963e+061 result=40 08:24:02 Get A/D value=-858993460 result=40 08:24:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:02 Aux= 08:24:02 Message to Camera, serial 81816 queued 08:24:39 Received message from Master: op=PointingHead serial=81829 08:24:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:24:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:24:40 Point started: ret=0 08:24:40 point_skyscan result=0 08:24:40 Check angles 08:24:40 SkyScan query 08:24:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.98<-13532 Statuses=0008 0009 08:24:41 Msec=0 True Az=112.995 Ze=-22.98 Az status=0008 Ze status=0009 08:24:41 Check angles 08:24:41 SkyScan query 08:24:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.965<-14931 Statuses=0008 0009 08:24:42 Msec=750 True Az=112.995 Ze=-43.965 Az status=0008 Ze status=0009 08:24:42 Check angles 08:24:42 SkyScan query 08:24:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.905<-16327 Statuses=0008 0009 08:24:42 Msec=1500 True Az=112.995 Ze=-64.905 Az status=0008 Ze status=0009 08:24:43 Check angles 08:24:43 SkyScan query 08:24:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.905<-17727 Statuses=0008 0009 08:24:43 Msec=2250 True Az=112.995 Ze=-85.905 Az status=0008 Ze status=0009 08:24:43 Check angles 08:24:43 SkyScan query 08:24:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.83<-19122 Statuses=0008 0009 08:24:44 Msec=3000 True Az=112.995 Ze=-106.83 Az status=0008 Ze status=0009 08:24:44 Check angles 08:24:44 SkyScan query 08:24:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.8<-20520 Statuses=0008 0009 08:24:45 Msec=3750 True Az=112.995 Ze=-127.8 Az status=0008 Ze status=0009 08:24:45 Check angles 08:24:45 SkyScan query 08:24:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.74<-21916 Statuses=0008 0009 08:24:45 Msec=4500 True Az=112.995 Ze=-148.74 Az status=0008 Ze status=0009 08:24:46 Check angles 08:24:46 SkyScan query 08:24:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.68<-23312 Statuses=0008 0009 08:24:46 Msec=5250 True Az=112.995 Ze=-169.68 Az status=0008 Ze status=0009 08:24:46 Check angles 08:24:46 SkyScan query 08:24:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:24:47 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:24:47 Message to Master queued w/err=0: serial=81829 error=0 08:24:52 Received message from Master: op=Filter serial=81830 08:24:52 Color wheel filter change from 0 to 0 08:24:52 FLIGetFilterPos err=0 currentPosition=0 08:24:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:52 Filter is already there-color wheel unchanged 08:24:52 Received message from Master: op=Shutter serial=81831 08:24:52 Shutter LASER open 08:24:52 Received message from Camera: op=State serial=81833 08:24:52 GetSingleValue result=40 Value=cccccccc 08:24:52 SkyScan query 08:24:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:24:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:53 Parameters OK 08:24:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:53 Set A/D data flow result=40 08:24:53 Set A/D channel type result=40 08:24:53 Set A/D encoding result=40 08:24:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:53 Set channel filter=0.000000e+000 result=40 08:24:53 Config A/D Result=40 08:24:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:53 Get A/D filter: -9.255963e+061 result=40 08:24:53 Get A/D value=-858993460 result=40 08:24:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:53 Parameters OK 08:24:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:53 Set A/D data flow result=40 08:24:53 Set A/D channel type result=40 08:24:53 Set A/D encoding result=40 08:24:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:53 Set channel filter=0.000000e+000 result=40 08:24:53 Config A/D Result=40 08:24:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:53 Get A/D filter: -9.255963e+061 result=40 08:24:53 Get A/D value=-858993460 result=40 08:24:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:53 Aux= 08:24:53 Message to Camera, serial 81833 queued 08:25:01 Received message from Master: op=Shutter serial=81843 08:25:01 Shutter LASER close 08:25:02 Received message from Master: op=PointingHead serial=81847 08:25:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:25:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:25:02 Point started: ret=0 08:25:02 point_skyscan result=0 08:25:03 Check angles 08:25:03 SkyScan query 08:25:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.68<-21512 Statuses=0008 0009 08:25:04 Msec=0 True Az=112.995 Ze=-142.68 Az status=0008 Ze status=0009 08:25:04 Check angles 08:25:04 SkyScan query 08:25:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.71<-20114 Statuses=0008 0009 08:25:04 Msec=750 True Az=112.995 Ze=-121.71 Az status=0008 Ze status=0009 08:25:04 Check angles 08:25:04 SkyScan query 08:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 08:25:05 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 08:25:05 Check angles 08:25:05 SkyScan query 08:25:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.83<-17322 Statuses=0008 0009 08:25:06 Msec=2250 True Az=112.995 Ze=-79.83 Az status=0008 Ze status=0009 08:25:06 Check angles 08:25:06 SkyScan query 08:25:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.875<-15925 Statuses=0008 0009 08:25:07 Msec=3000 True Az=112.995 Ze=-58.875 Az status=0008 Ze status=0009 08:25:07 Check angles 08:25:07 SkyScan query 08:25:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.89<-14526 Statuses=0008 0009 08:25:07 Msec=3750 True Az=112.995 Ze=-37.89 Az status=0008 Ze status=0009 08:25:07 Check angles 08:25:07 SkyScan query 08:25:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.95<-13130 Statuses=0008 0009 08:25:08 Msec=4500 True Az=112.995 Ze=-16.95 Az status=0008 Ze status=0009 08:25:08 Check angles 08:25:08 SkyScan query 08:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=4.38<-11708 Statuses=0008 0009 08:25:09 Msec=5250 True Az=112.995 Ze=4.38 Az status=0008 Ze status=0009 08:25:09 Check angles 08:25:09 SkyScan query 08:25:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:25:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:25:10 Message to Master queued w/err=0: serial=81847 error=0 08:25:15 Received message from Master: op=Filter serial=81848 08:25:15 Color wheel filter change from 0 to 0 08:25:15 FLIGetFilterPos err=0 currentPosition=0 08:25:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:15 Filter is already there-color wheel unchanged 08:25:15 Received message from Master: op=Shutter serial=81849 08:25:15 Shutter LASER close 08:25:15 Received message from Camera: op=State serial=81851 08:25:15 GetSingleValue result=40 Value=cccccccc 08:25:15 SkyScan query 08:25:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:25:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:15 Parameters OK 08:25:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:15 Set A/D data flow result=40 08:25:15 Set A/D channel type result=40 08:25:15 Set A/D encoding result=40 08:25:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:15 Set channel filter=0.000000e+000 result=40 08:25:15 Config A/D Result=40 08:25:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:15 Get A/D filter: -9.255963e+061 result=40 08:25:15 Get A/D value=-858993460 result=40 08:25:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:15 Parameters OK 08:25:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:15 Set A/D data flow result=40 08:25:15 Set A/D channel type result=40 08:25:15 Set A/D encoding result=40 08:25:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:15 Set channel filter=0.000000e+000 result=40 08:25:15 Config A/D Result=40 08:25:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:15 Get A/D filter: -9.255963e+061 result=40 08:25:15 Get A/D value=-858993460 result=40 08:25:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:15 Aux= 08:25:15 Message to Camera, serial 81851 queued 08:25:52 Received message from Master: op=PointingHead serial=81864 08:25:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:25:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:25:53 Point started: ret=0 08:25:53 point_skyscan result=0 08:25:53 Check angles 08:25:53 SkyScan query 08:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:25:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:25:54 Message to Master queued w/err=0: serial=81864 error=0 08:25:59 Received message from Master: op=Filter serial=81865 08:25:59 Color wheel filter change from 0 to 0 08:25:59 FLIGetFilterPos err=0 currentPosition=0 08:25:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:59 Filter is already there-color wheel unchanged 08:25:59 Received message from Master: op=Shutter serial=81866 08:25:59 Shutter LASER close 08:25:59 Received message from Camera: op=State serial=81868 08:25:59 GetSingleValue result=40 Value=cccccccc 08:25:59 SkyScan query 08:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:26:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:00 Parameters OK 08:26:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:00 Set A/D data flow result=40 08:26:00 Set A/D channel type result=40 08:26:00 Set A/D encoding result=40 08:26:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:00 Set channel filter=0.000000e+000 result=40 08:26:00 Config A/D Result=40 08:26:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:00 Get A/D filter: -9.255963e+061 result=40 08:26:00 Get A/D value=-858993460 result=40 08:26:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:00 Parameters OK 08:26:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:00 Set A/D data flow result=40 08:26:00 Set A/D channel type result=40 08:26:00 Set A/D encoding result=40 08:26:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:00 Set channel filter=0.000000e+000 result=40 08:26:00 Config A/D Result=40 08:26:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:00 Get A/D filter: -9.255963e+061 result=40 08:26:00 Get A/D value=-858993460 result=40 08:26:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:00 Aux= 08:26:00 Message to Camera, serial 81868 queued 08:26:37 Received message from Master: op=PointingHead serial=81881 08:26:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:26:37 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:26:37 Point started: ret=0 08:26:37 point_skyscan result=0 08:26:38 Check angles 08:26:38 SkyScan query 08:26:38 SkyScan query done: ret=0 az=135.87<-9058 ze=-6.51<-12434 Statuses=0009 0008 08:26:38 Msec=0 True Az=135.87 Ze=-6.51 Az status=0009 Ze status=0008 08:26:39 Check angles 08:26:39 SkyScan query 08:26:39 SkyScan query done: ret=0 az=153.81<-10254 ze=-6.495<-12433 Statuses=0009 0008 08:26:39 Msec=750 True Az=153.81 Ze=-6.495 Az status=0009 Ze status=0008 08:26:39 Check angles 08:26:39 SkyScan query 08:26:40 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 08:26:40 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 08:26:40 Check angles 08:26:40 SkyScan query 08:26:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:26:41 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:26:41 Message to Master queued w/err=0: serial=81881 error=0 08:26:46 Received message from Master: op=Filter serial=81882 08:26:46 Color wheel filter change from 0 to 0 08:26:46 FLIGetFilterPos err=0 currentPosition=0 08:26:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:46 Filter is already there-color wheel unchanged 08:26:46 Received message from Master: op=Shutter serial=81883 08:26:46 Shutter LASER close 08:26:46 Received message from Camera: op=State serial=81885 08:26:46 GetSingleValue result=40 Value=cccccccc 08:26:46 SkyScan query 08:26:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:26:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:46 Parameters OK 08:26:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:46 Set A/D data flow result=40 08:26:46 Set A/D channel type result=40 08:26:46 Set A/D encoding result=40 08:26:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:46 Set channel filter=0.000000e+000 result=40 08:26:46 Config A/D Result=40 08:26:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:46 Get A/D filter: -9.255963e+061 result=40 08:26:46 Get A/D value=-858993460 result=40 08:26:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:46 Parameters OK 08:26:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:46 Set A/D data flow result=40 08:26:46 Set A/D channel type result=40 08:26:46 Set A/D encoding result=40 08:26:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:46 Set channel filter=0.000000e+000 result=40 08:26:46 Config A/D Result=40 08:26:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:46 Get A/D filter: -9.255963e+061 result=40 08:26:46 Get A/D value=-858993460 result=40 08:26:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:46 Aux= 08:26:46 Message to Camera, serial 81885 queued 08:27:23 Received message from Master: op=PointingHead serial=81898 08:27:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:27:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:27:24 Point started: ret=0 08:27:24 point_skyscan result=0 08:27:24 Check angles 08:27:24 SkyScan query 08:27:25 SkyScan query done: ret=0 az=153.165<-10211 ze=6.51<-11566 Statuses=0009 0008 08:27:25 Msec=0 True Az=153.165 Ze=6.51 Az status=0009 Ze status=0008 08:27:25 Check angles 08:27:25 SkyScan query 08:27:26 SkyScan query done: ret=0 az=135.675<-9045 ze=6.495<-11567 Statuses=0009 0008 08:27:26 Msec=750 True Az=135.675 Ze=6.495 Az status=0009 Ze status=0008 08:27:26 Check angles 08:27:26 SkyScan query 08:27:26 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 08:27:26 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 08:27:27 Check angles 08:27:27 SkyScan query 08:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:27:27 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:27:27 Message to Master queued w/err=0: serial=81898 error=0 08:27:32 Received message from Master: op=Filter serial=81899 08:27:32 Color wheel filter change from 0 to 0 08:27:32 FLIGetFilterPos err=0 currentPosition=0 08:27:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:32 Filter is already there-color wheel unchanged 08:27:32 Received message from Master: op=Shutter serial=81900 08:27:32 Shutter LASER close 08:27:32 Received message from Camera: op=State serial=81902 08:27:32 GetSingleValue result=40 Value=cccccccc 08:27:32 SkyScan query 08:27:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:27:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:33 Parameters OK 08:27:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:33 Set A/D data flow result=40 08:27:33 Set A/D channel type result=40 08:27:33 Set A/D encoding result=40 08:27:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:33 Set channel filter=0.000000e+000 result=40 08:27:33 Config A/D Result=40 08:27:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:33 Get A/D filter: -9.255963e+061 result=40 08:27:33 Get A/D value=-858993460 result=40 08:27:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:33 Parameters OK 08:27:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:33 Set A/D data flow result=40 08:27:33 Set A/D channel type result=40 08:27:33 Set A/D encoding result=40 08:27:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:33 Set channel filter=0.000000e+000 result=40 08:27:33 Config A/D Result=40 08:27:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:33 Get A/D filter: -9.255963e+061 result=40 08:27:33 Get A/D value=-858993460 result=40 08:27:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:33 Aux= 08:27:33 Message to Camera, serial 81902 queued 08:28:10 Received message from Master: op=PointingHead serial=81915 08:28:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:28:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:28:10 Point started: ret=0 08:28:10 point_skyscan result=0 08:28:11 Check angles 08:28:11 SkyScan query 08:28:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.4<-13560 Statuses=0008 0009 08:28:11 Msec=0 True Az=112.995 Ze=-23.4 Az status=0008 Ze status=0009 08:28:12 Check angles 08:28:12 SkyScan query 08:28:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.805<-14987 Statuses=0008 0009 08:28:12 Msec=750 True Az=112.995 Ze=-44.805 Az status=0008 Ze status=0009 08:28:12 Check angles 08:28:12 SkyScan query 08:28:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.195<-16413 Statuses=0008 0009 08:28:13 Msec=1500 True Az=112.995 Ze=-66.195 Az status=0008 Ze status=0009 08:28:13 Check angles 08:28:13 SkyScan query 08:28:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.135<-17809 Statuses=0008 0009 08:28:14 Msec=2250 True Az=112.995 Ze=-87.135 Az status=0008 Ze status=0009 08:28:14 Check angles 08:28:14 SkyScan query 08:28:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.525<-19235 Statuses=0008 0009 08:28:14 Msec=3000 True Az=112.995 Ze=-108.525 Az status=0008 Ze status=0009 08:28:15 Check angles 08:28:15 SkyScan query 08:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.48<-20632 Statuses=0008 0009 08:28:15 Msec=3750 True Az=112.995 Ze=-129.48 Az status=0008 Ze status=0009 08:28:15 Check angles 08:28:15 SkyScan query 08:28:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.45<-22030 Statuses=0008 0009 08:28:16 Msec=4500 True Az=112.995 Ze=-150.45 Az status=0008 Ze status=0009 08:28:16 Check angles 08:28:16 SkyScan query 08:28:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0008 0009 08:28:17 Msec=5250 True Az=112.995 Ze=-171.525 Az status=0008 Ze status=0009 08:28:17 Check angles 08:28:17 SkyScan query 08:28:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:28:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:28:18 Message to Master queued w/err=0: serial=81915 error=0 08:28:23 Received message from Master: op=Filter serial=81916 08:28:23 Color wheel filter change from 0 to 0 08:28:23 FLIGetFilterPos err=0 currentPosition=0 08:28:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:23 Filter is already there-color wheel unchanged 08:28:23 Received message from Master: op=Shutter serial=81917 08:28:23 Shutter LASER open 08:28:23 Received message from Camera: op=State serial=81919 08:28:23 GetSingleValue result=40 Value=cccccccc 08:28:23 SkyScan query 08:28:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:28:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:23 Parameters OK 08:28:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:23 Set A/D data flow result=40 08:28:23 Set A/D channel type result=40 08:28:23 Set A/D encoding result=40 08:28:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:23 Set channel filter=0.000000e+000 result=40 08:28:23 Config A/D Result=40 08:28:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:23 Get A/D filter: -9.255963e+061 result=40 08:28:23 Get A/D value=-858993460 result=40 08:28:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:23 Parameters OK 08:28:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:23 Set A/D data flow result=40 08:28:23 Set A/D channel type result=40 08:28:23 Set A/D encoding result=40 08:28:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:23 Set channel filter=0.000000e+000 result=40 08:28:23 Config A/D Result=40 08:28:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:23 Get A/D filter: -9.255963e+061 result=40 08:28:23 Get A/D value=-858993460 result=40 08:28:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:23 Aux= 08:28:23 Message to Camera, serial 81919 queued 08:28:32 Received message from Master: op=Shutter serial=81929 08:28:32 Shutter LASER close 08:28:32 Received message from Master: op=PointingHead serial=81933 08:28:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:28:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:28:33 Point started: ret=0 08:28:33 point_skyscan result=0 08:28:33 Check angles 08:28:33 SkyScan query 08:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 08:28:34 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 08:28:34 Check angles 08:28:34 SkyScan query 08:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 08:28:35 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 08:28:35 Check angles 08:28:35 SkyScan query 08:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 08:28:36 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 08:28:36 Check angles 08:28:36 SkyScan query 08:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.74<-17316 Statuses=0008 0009 08:28:36 Msec=2250 True Az=112.995 Ze=-79.74 Az status=0008 Ze status=0009 08:28:36 Check angles 08:28:36 SkyScan query 08:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 08:28:37 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 08:28:37 Check angles 08:28:37 SkyScan query 08:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.41<-14494 Statuses=0008 0009 08:28:38 Msec=3750 True Az=112.995 Ze=-37.41 Az status=0008 Ze status=0009 08:28:38 Check angles 08:28:38 SkyScan query 08:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.975<-13065 Statuses=0008 0009 08:28:39 Msec=4500 True Az=112.995 Ze=-15.975 Az status=0008 Ze status=0009 08:28:39 Check angles 08:28:39 SkyScan query 08:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=4.755<-11683 Statuses=0008 0009 08:28:39 Msec=5250 True Az=112.995 Ze=4.755 Az status=0008 Ze status=0009 08:28:39 Check angles 08:28:39 SkyScan query 08:28:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:28:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:28:40 Message to Master queued w/err=0: serial=81933 error=0 08:28:45 Received message from Master: op=Filter serial=81934 08:28:45 Color wheel filter change from 0 to 0 08:28:45 FLIGetFilterPos err=0 currentPosition=0 08:28:45 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:45 Filter is already there-color wheel unchanged 08:28:45 Received message from Master: op=Shutter serial=81935 08:28:45 Shutter LASER close 08:28:45 Received message from Camera: op=State serial=81937 08:28:45 GetSingleValue result=40 Value=cccccccc 08:28:45 SkyScan query 08:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:28:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:46 Parameters OK 08:28:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:46 Set A/D data flow result=40 08:28:46 Set A/D channel type result=40 08:28:46 Set A/D encoding result=40 08:28:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:46 Set channel filter=0.000000e+000 result=40 08:28:46 Config A/D Result=40 08:28:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:46 Get A/D filter: -9.255963e+061 result=40 08:28:46 Get A/D value=-858993460 result=40 08:28:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:46 Parameters OK 08:28:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:46 Set A/D data flow result=40 08:28:46 Set A/D channel type result=40 08:28:46 Set A/D encoding result=40 08:28:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:46 Set channel filter=0.000000e+000 result=40 08:28:46 Config A/D Result=40 08:28:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:46 Get A/D filter: -9.255963e+061 result=40 08:28:46 Get A/D value=-858993460 result=40 08:28:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:46 Aux= 08:28:46 Message to Camera, serial 81937 queued 08:29:23 Received message from Master: op=PointingHead serial=81950 08:29:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:29:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:29:23 Point started: ret=0 08:29:23 point_skyscan result=0 08:29:24 Check angles 08:29:24 SkyScan query 08:29:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:29:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:29:24 Message to Master queued w/err=0: serial=81950 error=0 08:29:29 Received message from Master: op=Filter serial=81951 08:29:29 Color wheel filter change from 0 to 0 08:29:29 FLIGetFilterPos err=0 currentPosition=0 08:29:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:29 Filter is already there-color wheel unchanged 08:29:30 Received message from Master: op=Shutter serial=81952 08:29:30 Shutter LASER close 08:29:30 Received message from Camera: op=State serial=81954 08:29:30 GetSingleValue result=40 Value=cccccccc 08:29:30 SkyScan query 08:29:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:29:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:30 Parameters OK 08:29:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:30 Set A/D data flow result=40 08:29:30 Set A/D channel type result=40 08:29:30 Set A/D encoding result=40 08:29:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:30 Set channel filter=0.000000e+000 result=40 08:29:30 Config A/D Result=40 08:29:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:30 Get A/D filter: -9.255963e+061 result=40 08:29:30 Get A/D value=-858993460 result=40 08:29:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:30 Parameters OK 08:29:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:30 Set A/D data flow result=40 08:29:30 Set A/D channel type result=40 08:29:30 Set A/D encoding result=40 08:29:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:30 Set channel filter=0.000000e+000 result=40 08:29:30 Config A/D Result=40 08:29:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:30 Get A/D filter: -9.255963e+061 result=40 08:29:30 Get A/D value=-858993460 result=40 08:29:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:30 Aux= 08:29:30 Message to Camera, serial 81954 queued 08:30:07 Received message from Master: op=PointingHead serial=81967 08:30:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:30:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:30:07 Point started: ret=0 08:30:07 point_skyscan result=0 08:30:08 Check angles 08:30:08 SkyScan query 08:30:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:30:09 Message to Master queued w/err=0: serial=81967 error=0 08:30:14 Received message from Master: op=Filter serial=81968 08:30:14 Color wheel filter change from 0 to 0 08:30:14 FLIGetFilterPos err=0 currentPosition=0 08:30:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:14 Filter is already there-color wheel unchanged 08:30:14 Received message from Master: op=Shutter serial=81969 08:30:14 Shutter LASER close 08:30:14 Received message from Camera: op=State serial=81971 08:30:14 GetSingleValue result=40 Value=cccccccc 08:30:14 SkyScan query 08:30:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:15 Parameters OK 08:30:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:15 Set A/D data flow result=40 08:30:15 Set A/D channel type result=40 08:30:15 Set A/D encoding result=40 08:30:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:15 Set channel filter=0.000000e+000 result=40 08:30:15 Config A/D Result=40 08:30:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:15 Get A/D filter: -9.255963e+061 result=40 08:30:15 Get A/D value=-858993460 result=40 08:30:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:15 Parameters OK 08:30:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:15 Set A/D data flow result=40 08:30:15 Set A/D channel type result=40 08:30:15 Set A/D encoding result=40 08:30:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:15 Set channel filter=0.000000e+000 result=40 08:30:15 Config A/D Result=40 08:30:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:15 Get A/D filter: -9.255963e+061 result=40 08:30:15 Get A/D value=-858993460 result=40 08:30:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:15 Aux= 08:30:15 Message to Camera, serial 81971 queued 08:30:51 Received message from Master: op=PointingHead serial=81984 08:30:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:30:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:30:52 Point started: ret=0 08:30:52 point_skyscan result=0 08:30:53 Check angles 08:30:53 SkyScan query 08:30:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:30:53 Message to Master queued w/err=0: serial=81984 error=0 08:30:58 Received message from Master: op=Filter serial=81985 08:30:58 Color wheel filter change from 0 to 0 08:30:58 FLIGetFilterPos err=0 currentPosition=0 08:30:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:58 Filter is already there-color wheel unchanged 08:30:58 Received message from Master: op=Shutter serial=81986 08:30:58 Shutter LASER close 08:30:58 Received message from Camera: op=State serial=81988 08:30:58 GetSingleValue result=40 Value=cccccccc 08:30:58 SkyScan query 08:30:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:59 Parameters OK 08:30:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:59 Set A/D data flow result=40 08:30:59 Set A/D channel type result=40 08:30:59 Set A/D encoding result=40 08:30:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:59 Set channel filter=0.000000e+000 result=40 08:30:59 Config A/D Result=40 08:30:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:59 Get A/D filter: -9.255963e+061 result=40 08:30:59 Get A/D value=-858993460 result=40 08:30:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:59 Parameters OK 08:30:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:59 Set A/D data flow result=40 08:30:59 Set A/D channel type result=40 08:30:59 Set A/D encoding result=40 08:30:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:59 Set channel filter=0.000000e+000 result=40 08:30:59 Config A/D Result=40 08:30:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:59 Get A/D filter: -9.255963e+061 result=40 08:30:59 Get A/D value=-858993460 result=40 08:30:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:59 Aux= 08:30:59 Message to Camera, serial 81988 queued 08:31:36 Received message from Master: op=PointingHead serial=82001 08:31:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:31:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:31:36 Point started: ret=0 08:31:36 point_skyscan result=0 08:31:37 Check angles 08:31:37 SkyScan query 08:31:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 08:31:38 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 08:31:38 Check angles 08:31:38 SkyScan query 08:31:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 08:31:38 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 08:31:38 Check angles 08:31:38 SkyScan query 08:31:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 08:31:39 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 08:31:39 Check angles 08:31:39 SkyScan query 08:31:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.76<-17784 Statuses=0008 0009 08:31:40 Msec=2250 True Az=112.995 Ze=-86.76 Az status=0008 Ze status=0009 08:31:40 Check angles 08:31:40 SkyScan query 08:31:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.715<-19181 Statuses=0008 0009 08:31:41 Msec=3000 True Az=112.995 Ze=-107.715 Az status=0008 Ze status=0009 08:31:41 Check angles 08:31:41 SkyScan query 08:31:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 08:31:41 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 08:31:41 Check angles 08:31:41 SkyScan query 08:31:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.61<-21974 Statuses=0008 0009 08:31:42 Msec=4500 True Az=112.995 Ze=-149.61 Az status=0008 Ze status=0009 08:31:42 Check angles 08:31:42 SkyScan query 08:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 08:31:43 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 08:31:43 Check angles 08:31:43 SkyScan query 08:31:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:31:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:31:44 Message to Master queued w/err=0: serial=82001 error=0 08:31:49 Received message from Master: op=Filter serial=82002 08:31:49 Color wheel filter change from 0 to 0 08:31:49 FLIGetFilterPos err=0 currentPosition=0 08:31:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:49 Filter is already there-color wheel unchanged 08:31:49 Received message from Master: op=Shutter serial=82003 08:31:49 Shutter LASER open 08:31:49 Received message from Camera: op=State serial=82005 08:31:49 GetSingleValue result=40 Value=cccccccc 08:31:49 SkyScan query 08:31:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:31:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:49 Parameters OK 08:31:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:49 Set A/D data flow result=40 08:31:49 Set A/D channel type result=40 08:31:49 Set A/D encoding result=40 08:31:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:49 Set channel filter=0.000000e+000 result=40 08:31:49 Config A/D Result=40 08:31:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:49 Get A/D filter: -9.255963e+061 result=40 08:31:49 Get A/D value=-858993460 result=40 08:31:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:49 Parameters OK 08:31:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:49 Set A/D data flow result=40 08:31:49 Set A/D channel type result=40 08:31:49 Set A/D encoding result=40 08:31:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:49 Set channel filter=0.000000e+000 result=40 08:31:49 Config A/D Result=40 08:31:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:49 Get A/D filter: -9.255963e+061 result=40 08:31:49 Get A/D value=-858993460 result=40 08:31:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:49 Aux= 08:31:49 Message to Camera, serial 82005 queued 08:31:58 Received message from Master: op=Shutter serial=82015 08:31:58 Shutter LASER close 08:31:58 Received message from Master: op=PointingHead serial=82019 08:31:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:31:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:31:59 Point started: ret=0 08:31:59 point_skyscan result=0 08:32:00 Check angles 08:32:00 SkyScan query 08:32:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 08:32:00 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 08:32:00 Check angles 08:32:00 SkyScan query 08:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 08:32:01 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 08:32:01 Check angles 08:32:01 SkyScan query 08:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.37<-18758 Statuses=0008 0009 08:32:02 Msec=1500 True Az=112.995 Ze=-101.37 Az status=0008 Ze status=0009 08:32:02 Check angles 08:32:02 SkyScan query 08:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.415<-17361 Statuses=0008 0009 08:32:02 Msec=2250 True Az=112.995 Ze=-80.415 Az status=0008 Ze status=0009 08:32:03 Check angles 08:32:03 SkyScan query 08:32:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.475<-15965 Statuses=0008 0009 08:32:03 Msec=3000 True Az=112.995 Ze=-59.475 Az status=0008 Ze status=0009 08:32:03 Check angles 08:32:03 SkyScan query 08:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.49<-14566 Statuses=0008 0009 08:32:04 Msec=3750 True Az=112.995 Ze=-38.49 Az status=0008 Ze status=0009 08:32:04 Check angles 08:32:04 SkyScan query 08:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.55<-13170 Statuses=0008 0009 08:32:05 Msec=4500 True Az=112.995 Ze=-17.55 Az status=0008 Ze status=0009 08:32:05 Check angles 08:32:05 SkyScan query 08:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=3.42<-11772 Statuses=0008 0009 08:32:05 Msec=5250 True Az=112.995 Ze=3.42 Az status=0008 Ze status=0009 08:32:06 Check angles 08:32:06 SkyScan query 08:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:32:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:32:06 Message to Master queued w/err=0: serial=82019 error=0 08:32:11 Received message from Master: op=Filter serial=82020 08:32:11 Color wheel filter change from 0 to 0 08:32:11 FLIGetFilterPos err=0 currentPosition=0 08:32:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:11 Filter is already there-color wheel unchanged 08:32:11 Received message from Master: op=Shutter serial=82021 08:32:11 Shutter LASER close 08:32:11 Received message from Camera: op=State serial=82023 08:32:11 GetSingleValue result=40 Value=cccccccc 08:32:11 SkyScan query 08:32:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:32:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:12 Parameters OK 08:32:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:12 Set A/D data flow result=40 08:32:12 Set A/D channel type result=40 08:32:12 Set A/D encoding result=40 08:32:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:12 Set channel filter=0.000000e+000 result=40 08:32:12 Config A/D Result=40 08:32:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:12 Get A/D filter: -9.255963e+061 result=40 08:32:12 Get A/D value=-858993460 result=40 08:32:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:12 Parameters OK 08:32:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:12 Set A/D data flow result=40 08:32:12 Set A/D channel type result=40 08:32:12 Set A/D encoding result=40 08:32:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:12 Set channel filter=0.000000e+000 result=40 08:32:12 Config A/D Result=40 08:32:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:12 Get A/D filter: -9.255963e+061 result=40 08:32:12 Get A/D value=-858993460 result=40 08:32:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:12 Aux= 08:32:12 Message to Camera, serial 82023 queued 08:32:48 Received message from Master: op=PointingHead serial=82035 08:32:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:32:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:32:48 Point started: ret=0 08:32:48 point_skyscan result=0 08:32:49 Check angles 08:32:49 SkyScan query 08:32:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:32:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:32:50 Message to Master queued w/err=0: serial=82035 error=0 08:32:55 Received message from Master: op=Filter serial=82036 08:32:55 Color wheel filter change from 0 to 0 08:32:55 FLIGetFilterPos err=0 currentPosition=0 08:32:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:55 Filter is already there-color wheel unchanged 08:32:55 Received message from Master: op=Shutter serial=82037 08:32:55 Shutter LASER close 08:32:55 Received message from Camera: op=State serial=82039 08:32:55 GetSingleValue result=40 Value=cccccccc 08:32:55 SkyScan query 08:32:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:32:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:55 Parameters OK 08:32:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:55 Set A/D data flow result=40 08:32:55 Set A/D channel type result=40 08:32:55 Set A/D encoding result=40 08:32:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:55 Set channel filter=0.000000e+000 result=40 08:32:55 Config A/D Result=40 08:32:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:55 Get A/D filter: -9.255963e+061 result=40 08:32:55 Get A/D value=-858993460 result=40 08:32:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:55 Parameters OK 08:32:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:55 Set A/D data flow result=40 08:32:55 Set A/D channel type result=40 08:32:55 Set A/D encoding result=40 08:32:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:55 Set channel filter=0.000000e+000 result=40 08:32:55 Config A/D Result=40 08:32:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:55 Get A/D filter: -9.255963e+061 result=40 08:32:55 Get A/D value=-858993460 result=40 08:32:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:55 Aux= 08:32:55 Message to Camera, serial 82039 queued 08:33:32 Received message from Master: op=PointingHead serial=82052 08:33:32 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:33:32 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:33:33 Point started: ret=0 08:33:33 point_skyscan result=0 08:33:33 Check angles 08:33:33 SkyScan query 08:33:34 SkyScan query done: ret=0 az=136.08<-9072 ze=-6.51<-12434 Statuses=0009 0008 08:33:34 Msec=0 True Az=136.08 Ze=-6.51 Az status=0009 Ze status=0008 08:33:34 Check angles 08:33:34 SkyScan query 08:33:35 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.495<-12433 Statuses=0009 0008 08:33:35 Msec=750 True Az=153.495 Ze=-6.495 Az status=0009 Ze status=0008 08:33:35 Check angles 08:33:35 SkyScan query 08:33:35 SkyScan query done: ret=0 az=170.97<-11398 ze=-6.495<-12433 Statuses=0009 0008 08:33:35 Msec=1500 True Az=170.97 Ze=-6.495 Az status=0009 Ze status=0008 08:33:36 Check angles 08:33:36 SkyScan query 08:33:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:33:36 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:33:36 Message to Master queued w/err=0: serial=82052 error=0 08:33:38 Received message from Master: op=Identify serial=82053 08:33:41 Received message from Master: op=Filter serial=82056 08:33:41 Color wheel filter change from 0 to 0 08:33:41 FLIGetFilterPos err=0 currentPosition=0 08:33:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:41 Filter is already there-color wheel unchanged 08:33:41 Received message from Master: op=Shutter serial=82057 08:33:41 Shutter LASER close 08:33:41 Received message from Camera: op=State serial=82059 08:33:41 GetSingleValue result=40 Value=cccccccc 08:33:41 SkyScan query 08:33:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:33:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:42 Parameters OK 08:33:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:42 Set A/D data flow result=40 08:33:42 Set A/D channel type result=40 08:33:42 Set A/D encoding result=40 08:33:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:42 Set channel filter=0.000000e+000 result=40 08:33:42 Config A/D Result=40 08:33:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:42 Get A/D filter: -9.255963e+061 result=40 08:33:42 Get A/D value=-858993460 result=40 08:33:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:42 Parameters OK 08:33:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:42 Set A/D data flow result=40 08:33:42 Set A/D channel type result=40 08:33:42 Set A/D encoding result=40 08:33:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:42 Set channel filter=0.000000e+000 result=40 08:33:42 Config A/D Result=40 08:33:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:42 Get A/D filter: -9.255963e+061 result=40 08:33:42 Get A/D value=-858993460 result=40 08:33:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:42 Aux= [UTC 2019-3-3 08:33:42] 08:33:42 Message to Camera, serial 82059 queued 08:34:19 Received message from Master: op=PointingHead serial=82072 08:34:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:34:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:34:19 Point started: ret=0 08:34:19 point_skyscan result=0 08:34:20 Check angles 08:34:20 SkyScan query 08:34:20 SkyScan query done: ret=0 az=153.24<-10216 ze=6.51<-11566 Statuses=0009 0008 08:34:20 Msec=0 True Az=153.24 Ze=6.51 Az status=0009 Ze status=0008 08:34:21 Check angles 08:34:21 SkyScan query 08:34:21 SkyScan query done: ret=0 az=135.72<-9048 ze=6.495<-11567 Statuses=0009 0008 08:34:21 Msec=750 True Az=135.72 Ze=6.495 Az status=0009 Ze status=0008 08:34:21 Check angles 08:34:21 SkyScan query 08:34:22 SkyScan query done: ret=0 az=117.855<-7857 ze=6.495<-11567 Statuses=0009 0008 08:34:22 Msec=1500 True Az=117.855 Ze=6.495 Az status=0009 Ze status=0008 08:34:22 Check angles 08:34:22 SkyScan query 08:34:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:34:23 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:34:23 Message to Master queued w/err=0: serial=82072 error=0 08:34:28 Received message from Master: op=Filter serial=82073 08:34:28 Color wheel filter change from 0 to 0 08:34:28 FLIGetFilterPos err=0 currentPosition=0 08:34:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:28 Filter is already there-color wheel unchanged 08:34:28 Received message from Master: op=Shutter serial=82074 08:34:28 Shutter LASER close 08:34:28 Received message from Camera: op=State serial=82076 08:34:28 GetSingleValue result=40 Value=cccccccc 08:34:28 SkyScan query 08:34:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:34:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:29 Parameters OK 08:34:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:29 Set A/D data flow result=40 08:34:29 Set A/D channel type result=40 08:34:29 Set A/D encoding result=40 08:34:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:29 Set channel filter=0.000000e+000 result=40 08:34:29 Config A/D Result=40 08:34:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:29 Get A/D filter: -9.255963e+061 result=40 08:34:29 Get A/D value=-858993460 result=40 08:34:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:29 Parameters OK 08:34:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:29 Set A/D data flow result=40 08:34:29 Set A/D channel type result=40 08:34:29 Set A/D encoding result=40 08:34:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:29 Set channel filter=0.000000e+000 result=40 08:34:29 Config A/D Result=40 08:34:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:29 Get A/D filter: -9.255963e+061 result=40 08:34:29 Get A/D value=-858993460 result=40 08:34:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:29 Aux= 08:34:29 Message to Camera, serial 82076 queued 08:35:05 Received message from Master: op=PointingHead serial=82089 08:35:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:35:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:35:06 Point started: ret=0 08:35:06 point_skyscan result=0 08:35:06 Check angles 08:35:06 SkyScan query 08:35:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 08:35:07 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 08:35:07 Check angles 08:35:07 SkyScan query 08:35:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.145<-14943 Statuses=0008 0009 08:35:08 Msec=750 True Az=112.995 Ze=-44.145 Az status=0008 Ze status=0009 08:35:08 Check angles 08:35:08 SkyScan query 08:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.085<-16339 Statuses=0008 0009 08:35:09 Msec=1500 True Az=112.995 Ze=-65.085 Az status=0008 Ze status=0009 08:35:09 Check angles 08:35:09 SkyScan query 08:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.055<-17737 Statuses=0008 0009 08:35:09 Msec=2250 True Az=112.995 Ze=-86.055 Az status=0008 Ze status=0009 08:35:09 Check angles 08:35:09 SkyScan query 08:35:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.43<-19162 Statuses=0008 0009 08:35:10 Msec=3000 True Az=112.995 Ze=-107.43 Az status=0008 Ze status=0009 08:35:10 Check angles 08:35:10 SkyScan query 08:35:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 08:35:11 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 08:35:11 Check angles 08:35:11 SkyScan query 08:35:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.325<-21955 Statuses=0008 0009 08:35:12 Msec=4500 True Az=112.995 Ze=-149.325 Az status=0008 Ze status=0009 08:35:12 Check angles 08:35:12 SkyScan query 08:35:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.67<-23378 Statuses=0008 0009 08:35:12 Msec=5250 True Az=112.995 Ze=-170.67 Az status=0008 Ze status=0009 08:35:12 Check angles 08:35:12 SkyScan query 08:35:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:35:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:35:13 Message to Master queued w/err=0: serial=82089 error=0 08:35:18 Received message from Master: op=Filter serial=82090 08:35:18 Color wheel filter change from 0 to 0 08:35:18 FLIGetFilterPos err=0 currentPosition=0 08:35:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:18 Filter is already there-color wheel unchanged 08:35:18 Received message from Master: op=Shutter serial=82091 08:35:18 Shutter LASER open 08:35:18 Received message from Camera: op=State serial=82093 08:35:18 GetSingleValue result=40 Value=cccccccc 08:35:18 SkyScan query 08:35:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:35:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:19 Parameters OK 08:35:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:19 Set A/D data flow result=40 08:35:19 Set A/D channel type result=40 08:35:19 Set A/D encoding result=40 08:35:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:19 Set channel filter=0.000000e+000 result=40 08:35:19 Config A/D Result=40 08:35:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:19 Get A/D filter: -9.255963e+061 result=40 08:35:19 Get A/D value=-858993460 result=40 08:35:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:19 Parameters OK 08:35:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:19 Set A/D data flow result=40 08:35:19 Set A/D channel type result=40 08:35:19 Set A/D encoding result=40 08:35:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:19 Set channel filter=0.000000e+000 result=40 08:35:19 Config A/D Result=40 08:35:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:19 Get A/D filter: -9.255963e+061 result=40 08:35:19 Get A/D value=-858993460 result=40 08:35:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:19 Aux= 08:35:19 Message to Camera, serial 82093 queued 08:35:27 Received message from Master: op=Shutter serial=82103 08:35:27 Shutter LASER close 08:35:28 Received message from Master: op=PointingHead serial=82107 08:35:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:35:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:35:28 Point started: ret=0 08:35:28 point_skyscan result=0 08:35:29 Check angles 08:35:29 SkyScan query 08:35:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 08:35:30 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 08:35:30 Check angles 08:35:30 SkyScan query 08:35:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 08:35:30 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 08:35:30 Check angles 08:35:30 SkyScan query 08:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 08:35:31 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 08:35:31 Check angles 08:35:31 SkyScan query 08:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.115<-17341 Statuses=0008 0009 08:35:32 Msec=2250 True Az=112.995 Ze=-80.115 Az status=0008 Ze status=0009 08:35:32 Check angles 08:35:32 SkyScan query 08:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 08:35:33 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 08:35:33 Check angles 08:35:33 SkyScan query 08:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 08:35:33 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 08:35:33 Check angles 08:35:33 SkyScan query 08:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 08:35:34 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 08:35:34 Check angles 08:35:34 SkyScan query 08:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 08:35:35 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 08:35:35 Check angles 08:35:35 SkyScan query 08:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:35:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:35:36 Message to Master queued w/err=0: serial=82107 error=0 08:35:41 Received message from Master: op=Filter serial=82108 08:35:41 Color wheel filter change from 0 to 0 08:35:41 FLIGetFilterPos err=0 currentPosition=0 08:35:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:41 Filter is already there-color wheel unchanged 08:35:41 Received message from Master: op=Shutter serial=82109 08:35:41 Shutter LASER close 08:35:41 Received message from Camera: op=State serial=82111 08:35:41 GetSingleValue result=40 Value=cccccccc 08:35:41 SkyScan query 08:35:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:35:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:41 Parameters OK 08:35:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:41 Set A/D data flow result=40 08:35:41 Set A/D channel type result=40 08:35:41 Set A/D encoding result=40 08:35:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:41 Set channel filter=0.000000e+000 result=40 08:35:41 Config A/D Result=40 08:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:41 Get A/D filter: -9.255963e+061 result=40 08:35:41 Get A/D value=-858993460 result=40 08:35:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:41 Parameters OK 08:35:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:41 Set A/D data flow result=40 08:35:41 Set A/D channel type result=40 08:35:41 Set A/D encoding result=40 08:35:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:41 Set channel filter=0.000000e+000 result=40 08:35:41 Config A/D Result=40 08:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:41 Get A/D filter: -9.255963e+061 result=40 08:35:41 Get A/D value=-858993460 result=40 08:35:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:41 Aux= 08:35:41 Message to Camera, serial 82111 queued 08:36:17 Received message from Master: op=PointingHead serial=82123 08:36:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:36:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:36:18 Point started: ret=0 08:36:18 point_skyscan result=0 08:36:18 Check angles 08:36:18 SkyScan query 08:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:36:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:36:19 Message to Master queued w/err=0: serial=82123 error=0 08:36:24 Received message from Master: op=Filter serial=82124 08:36:24 Color wheel filter change from 0 to 0 08:36:24 FLIGetFilterPos err=0 currentPosition=0 08:36:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:24 Filter is already there-color wheel unchanged 08:36:24 Received message from Master: op=Shutter serial=82125 08:36:24 Shutter LASER close 08:36:24 Received message from Camera: op=State serial=82127 08:36:24 GetSingleValue result=40 Value=cccccccc 08:36:24 SkyScan query 08:36:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:36:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:25 Parameters OK 08:36:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:25 Set A/D data flow result=40 08:36:25 Set A/D channel type result=40 08:36:25 Set A/D encoding result=40 08:36:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:25 Set channel filter=0.000000e+000 result=40 08:36:25 Config A/D Result=40 08:36:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:25 Get A/D filter: -9.255963e+061 result=40 08:36:25 Get A/D value=-858993460 result=40 08:36:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:25 Parameters OK 08:36:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:25 Set A/D data flow result=40 08:36:25 Set A/D channel type result=40 08:36:25 Set A/D encoding result=40 08:36:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:25 Set channel filter=0.000000e+000 result=40 08:36:25 Config A/D Result=40 08:36:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:25 Get A/D filter: -9.255963e+061 result=40 08:36:25 Get A/D value=-858993460 result=40 08:36:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:25 Aux= 08:36:25 Message to Camera, serial 82127 queued 08:37:02 Received message from Master: op=PointingHead serial=82140 08:37:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:37:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:37:02 Point started: ret=0 08:37:02 point_skyscan result=0 08:37:03 Check angles 08:37:03 SkyScan query 08:37:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:37:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:37:03 Message to Master queued w/err=0: serial=82140 error=0 08:37:08 Received message from Master: op=Filter serial=82141 08:37:08 Color wheel filter change from 0 to 0 08:37:08 FLIGetFilterPos err=0 currentPosition=0 08:37:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:08 Filter is already there-color wheel unchanged 08:37:09 Received message from Master: op=Shutter serial=82142 08:37:09 Shutter LASER close 08:37:09 Received message from Camera: op=State serial=82144 08:37:09 GetSingleValue result=40 Value=cccccccc 08:37:09 SkyScan query 08:37:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:37:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:09 Parameters OK 08:37:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:09 Set A/D data flow result=40 08:37:09 Set A/D channel type result=40 08:37:09 Set A/D encoding result=40 08:37:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:09 Set channel filter=0.000000e+000 result=40 08:37:09 Config A/D Result=40 08:37:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:09 Get A/D filter: -9.255963e+061 result=40 08:37:09 Get A/D value=-858993460 result=40 08:37:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:09 Parameters OK 08:37:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:09 Set A/D data flow result=40 08:37:09 Set A/D channel type result=40 08:37:09 Set A/D encoding result=40 08:37:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:09 Set channel filter=0.000000e+000 result=40 08:37:09 Config A/D Result=40 08:37:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:09 Get A/D filter: -9.255963e+061 result=40 08:37:09 Get A/D value=-858993460 result=40 08:37:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:09 Aux= 08:37:09 Message to Camera, serial 82144 queued 08:37:46 Received message from Master: op=PointingHead serial=82157 08:37:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:37:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:37:46 Point started: ret=0 08:37:46 point_skyscan result=0 08:37:47 Check angles 08:37:47 SkyScan query 08:37:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:37:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:37:48 Message to Master queued w/err=0: serial=82157 error=0 08:37:53 Received message from Master: op=Filter serial=82158 08:37:53 Color wheel filter change from 0 to 0 08:37:53 FLIGetFilterPos err=0 currentPosition=0 08:37:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:53 Filter is already there-color wheel unchanged 08:37:53 Received message from Master: op=Shutter serial=82159 08:37:53 Shutter LASER close 08:37:53 Received message from Camera: op=State serial=82161 08:37:53 GetSingleValue result=40 Value=cccccccc 08:37:53 SkyScan query 08:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:37:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:53 Parameters OK 08:37:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:53 Set A/D data flow result=40 08:37:53 Set A/D channel type result=40 08:37:53 Set A/D encoding result=40 08:37:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:53 Set channel filter=0.000000e+000 result=40 08:37:53 Config A/D Result=40 08:37:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:53 Get A/D filter: -9.255963e+061 result=40 08:37:53 Get A/D value=-858993460 result=40 08:37:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:53 Parameters OK 08:37:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:53 Set A/D data flow result=40 08:37:53 Set A/D channel type result=40 08:37:53 Set A/D encoding result=40 08:37:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:53 Set channel filter=0.000000e+000 result=40 08:37:53 Config A/D Result=40 08:37:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:53 Get A/D filter: -9.255963e+061 result=40 08:37:53 Get A/D value=-858993460 result=40 08:37:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:53 Aux= 08:37:53 Message to Camera, serial 82161 queued 08:38:30 Received message from Master: op=PointingHead serial=82174 08:38:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:38:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:38:31 Point started: ret=0 08:38:31 point_skyscan result=0 08:38:31 Check angles 08:38:31 SkyScan query 08:38:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 08:38:32 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 08:38:32 Check angles 08:38:32 SkyScan query 08:38:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 08:38:33 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 08:38:33 Check angles 08:38:33 SkyScan query 08:38:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.075<-16405 Statuses=0008 0009 08:38:33 Msec=1500 True Az=112.995 Ze=-66.075 Az status=0008 Ze status=0009 08:38:34 Check angles 08:38:34 SkyScan query 08:38:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.015<-17801 Statuses=0008 0009 08:38:34 Msec=2250 True Az=112.995 Ze=-87.015 Az status=0008 Ze status=0009 08:38:34 Check angles 08:38:34 SkyScan query 08:38:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 08:38:35 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 08:38:35 Check angles 08:38:35 SkyScan query 08:38:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.36<-20624 Statuses=0008 0009 08:38:36 Msec=3750 True Az=112.995 Ze=-129.36 Az status=0008 Ze status=0009 08:38:36 Check angles 08:38:36 SkyScan query 08:38:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.315<-22021 Statuses=0008 0009 08:38:36 Msec=4500 True Az=112.995 Ze=-150.315 Az status=0008 Ze status=0009 08:38:37 Check angles 08:38:37 SkyScan query 08:38:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0008 0009 08:38:37 Msec=5250 True Az=112.995 Ze=-171.105 Az status=0008 Ze status=0009 08:38:37 Check angles 08:38:37 SkyScan query 08:38:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:38:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:38:38 Message to Master queued w/err=0: serial=82174 error=0 08:38:43 Received message from Master: op=Filter serial=82175 08:38:43 Color wheel filter change from 0 to 0 08:38:43 FLIGetFilterPos err=0 currentPosition=0 08:38:43 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:43 Filter is already there-color wheel unchanged 08:38:43 Received message from Master: op=Shutter serial=82176 08:38:43 Shutter LASER open 08:38:43 Received message from Camera: op=State serial=82178 08:38:43 GetSingleValue result=40 Value=cccccccc 08:38:43 SkyScan query 08:38:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:38:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:44 Parameters OK 08:38:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:44 Set A/D data flow result=40 08:38:44 Set A/D channel type result=40 08:38:44 Set A/D encoding result=40 08:38:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:44 Set channel filter=0.000000e+000 result=40 08:38:44 Config A/D Result=40 08:38:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:44 Get A/D filter: -9.255963e+061 result=40 08:38:44 Get A/D value=-858993460 result=40 08:38:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:44 Parameters OK 08:38:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:44 Set A/D data flow result=40 08:38:44 Set A/D channel type result=40 08:38:44 Set A/D encoding result=40 08:38:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:44 Set channel filter=0.000000e+000 result=40 08:38:44 Config A/D Result=40 08:38:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:44 Get A/D filter: -9.255963e+061 result=40 08:38:44 Get A/D value=-858993460 result=40 08:38:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:44 Aux= 08:38:44 Message to Camera, serial 82178 queued 08:38:52 Received message from Master: op=Shutter serial=82188 08:38:52 Shutter LASER close 08:38:53 Received message from Master: op=PointingHead serial=82192 08:38:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:38:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:38:53 Point started: ret=0 08:38:53 point_skyscan result=0 08:38:54 Check angles 08:38:54 SkyScan query 08:38:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 08:38:55 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 08:38:55 Check angles 08:38:55 SkyScan query 08:38:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.68<-20112 Statuses=0008 0009 08:38:55 Msec=750 True Az=112.995 Ze=-121.68 Az status=0008 Ze status=0009 08:38:56 Check angles 08:38:56 SkyScan query 08:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.755<-18717 Statuses=0008 0009 08:38:56 Msec=1500 True Az=112.995 Ze=-100.755 Az status=0008 Ze status=0009 08:38:56 Check angles 08:38:56 SkyScan query 08:38:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.8<-17320 Statuses=0008 0009 08:38:57 Msec=2250 True Az=112.995 Ze=-79.8 Az status=0008 Ze status=0009 08:38:57 Check angles 08:38:57 SkyScan query 08:38:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.86<-15924 Statuses=0008 0009 08:38:58 Msec=3000 True Az=112.995 Ze=-58.86 Az status=0008 Ze status=0009 08:38:58 Check angles 08:38:58 SkyScan query 08:38:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 08:38:58 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 08:38:59 Check angles 08:38:59 SkyScan query 08:38:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 08:38:59 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 08:38:59 Check angles 08:38:59 SkyScan query 08:39:00 SkyScan query done: ret=0 az=112.995<-7533 ze=4.02<-11732 Statuses=0008 0009 08:39:00 Msec=5250 True Az=112.995 Ze=4.02 Az status=0008 Ze status=0009 08:39:00 Check angles 08:39:00 SkyScan query 08:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:39:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:39:01 Message to Master queued w/err=0: serial=82192 error=0 08:39:06 Received message from Master: op=Filter serial=82193 08:39:06 Color wheel filter change from 0 to 0 08:39:06 FLIGetFilterPos err=0 currentPosition=0 08:39:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:06 Filter is already there-color wheel unchanged 08:39:06 Received message from Master: op=Shutter serial=82194 08:39:06 Shutter LASER close 08:39:06 Received message from Camera: op=State serial=82196 08:39:06 GetSingleValue result=40 Value=cccccccc 08:39:06 SkyScan query 08:39:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:39:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:07 Parameters OK 08:39:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:07 Set A/D data flow result=40 08:39:07 Set A/D channel type result=40 08:39:07 Set A/D encoding result=40 08:39:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:07 Set channel filter=0.000000e+000 result=40 08:39:07 Config A/D Result=40 08:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:07 Get A/D filter: -9.255963e+061 result=40 08:39:07 Get A/D value=-858993460 result=40 08:39:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:07 Parameters OK 08:39:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:07 Set A/D data flow result=40 08:39:07 Set A/D channel type result=40 08:39:07 Set A/D encoding result=40 08:39:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:07 Set channel filter=0.000000e+000 result=40 08:39:07 Config A/D Result=40 08:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:07 Get A/D filter: -9.255963e+061 result=40 08:39:07 Get A/D value=-858993460 result=40 08:39:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:07 Aux= 08:39:07 Message to Camera, serial 82196 queued 08:39:43 Received message from Master: op=PointingHead serial=82209 08:39:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:39:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:39:44 Point started: ret=0 08:39:44 point_skyscan result=0 08:39:45 Check angles 08:39:45 SkyScan query 08:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:39:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:39:45 Message to Master queued w/err=0: serial=82209 error=0 08:39:50 Received message from Master: op=Filter serial=82210 08:39:50 Color wheel filter change from 0 to 0 08:39:50 FLIGetFilterPos err=0 currentPosition=0 08:39:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:50 Filter is already there-color wheel unchanged 08:39:50 Received message from Master: op=Shutter serial=82211 08:39:50 Shutter LASER close 08:39:50 Received message from Camera: op=State serial=82213 08:39:50 GetSingleValue result=40 Value=cccccccc 08:39:50 SkyScan query 08:39:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:39:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:51 Parameters OK 08:39:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:51 Set A/D data flow result=40 08:39:51 Set A/D channel type result=40 08:39:51 Set A/D encoding result=40 08:39:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:51 Set channel filter=0.000000e+000 result=40 08:39:51 Config A/D Result=40 08:39:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:51 Get A/D filter: -9.255963e+061 result=40 08:39:51 Get A/D value=-858993460 result=40 08:39:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:51 Parameters OK 08:39:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:51 Set A/D data flow result=40 08:39:51 Set A/D channel type result=40 08:39:51 Set A/D encoding result=40 08:39:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:51 Set channel filter=0.000000e+000 result=40 08:39:51 Config A/D Result=40 08:39:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:51 Get A/D filter: -9.255963e+061 result=40 08:39:51 Get A/D value=-858993460 result=40 08:39:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:51 Aux= 08:39:51 Message to Camera, serial 82213 queued 08:40:28 Received message from Master: op=PointingHead serial=82226 08:40:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:40:28 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:40:28 Point started: ret=0 08:40:28 point_skyscan result=0 08:40:29 Check angles 08:40:29 SkyScan query 08:40:29 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 08:40:29 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 08:40:30 Check angles 08:40:30 SkyScan query 08:40:30 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.495<-12433 Statuses=0009 0008 08:40:30 Msec=750 True Az=153.6 Ze=-6.495 Az status=0009 Ze status=0008 08:40:30 Check angles 08:40:30 SkyScan query 08:40:31 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 08:40:31 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 08:40:31 Check angles 08:40:31 SkyScan query 08:40:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:40:32 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:40:32 Message to Master queued w/err=0: serial=82226 error=0 08:40:37 Received message from Master: op=Filter serial=82227 08:40:37 Color wheel filter change from 0 to 0 08:40:37 FLIGetFilterPos err=0 currentPosition=0 08:40:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:37 Filter is already there-color wheel unchanged 08:40:37 Received message from Master: op=Shutter serial=82228 08:40:37 Shutter LASER close 08:40:37 Received message from Camera: op=State serial=82230 08:40:37 GetSingleValue result=40 Value=cccccccc 08:40:37 SkyScan query 08:40:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:40:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:38 Parameters OK 08:40:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:38 Set A/D data flow result=40 08:40:38 Set A/D channel type result=40 08:40:38 Set A/D encoding result=40 08:40:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:38 Set channel filter=0.000000e+000 result=40 08:40:38 Config A/D Result=40 08:40:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:38 Get A/D filter: -9.255963e+061 result=40 08:40:38 Get A/D value=-858993460 result=40 08:40:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:38 Parameters OK 08:40:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:38 Set A/D data flow result=40 08:40:38 Set A/D channel type result=40 08:40:38 Set A/D encoding result=40 08:40:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:38 Set channel filter=0.000000e+000 result=40 08:40:38 Config A/D Result=40 08:40:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:38 Get A/D filter: -9.255963e+061 result=40 08:40:38 Get A/D value=-858993460 result=40 08:40:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:38 Aux= 08:40:38 Message to Camera, serial 82230 queued 08:41:14 Received message from Master: op=PointingHead serial=82243 08:41:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:41:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:41:15 Point started: ret=0 08:41:15 point_skyscan result=0 08:41:16 Check angles 08:41:16 SkyScan query 08:41:16 SkyScan query done: ret=0 az=152.67<-10178 ze=6.51<-11566 Statuses=0009 0008 08:41:16 Msec=0 True Az=152.67 Ze=6.51 Az status=0009 Ze status=0008 08:41:16 Check angles 08:41:16 SkyScan query 08:41:17 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 08:41:17 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 08:41:17 Check angles 08:41:17 SkyScan query 08:41:18 SkyScan query done: ret=0 az=117.315<-7821 ze=6.495<-11567 Statuses=0009 0008 08:41:18 Msec=1500 True Az=117.315 Ze=6.495 Az status=0009 Ze status=0008 08:41:18 Check angles 08:41:18 SkyScan query 08:41:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:41:18 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:41:18 Message to Master queued w/err=0: serial=82243 error=0 08:41:23 Received message from Master: op=Filter serial=82244 08:41:23 Color wheel filter change from 0 to 0 08:41:23 FLIGetFilterPos err=0 currentPosition=0 08:41:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:41:23 Filter is already there-color wheel unchanged 08:41:24 Received message from Master: op=Shutter serial=82245 08:41:24 Shutter LASER close 08:41:24 Received message from Camera: op=State serial=82247 08:41:24 GetSingleValue result=40 Value=cccccccc 08:41:24 SkyScan query 08:41:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:41:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:24 Parameters OK 08:41:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:24 Set A/D data flow result=40 08:41:24 Set A/D channel type result=40 08:41:24 Set A/D encoding result=40 08:41:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:24 Set channel filter=0.000000e+000 result=40 08:41:24 Config A/D Result=40 08:41:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:24 Get A/D filter: -9.255963e+061 result=40 08:41:24 Get A/D value=-858993460 result=40 08:41:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:24 Parameters OK 08:41:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:24 Set A/D data flow result=40 08:41:24 Set A/D channel type result=40 08:41:24 Set A/D encoding result=40 08:41:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:24 Set channel filter=0.000000e+000 result=40 08:41:24 Config A/D Result=40 08:41:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:24 Get A/D filter: -9.255963e+061 result=40 08:41:24 Get A/D value=-858993460 result=40 08:41:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:24 Aux= 08:41:24 Message to Camera, serial 82247 queued 08:42:01 Received message from Master: op=PointingHead serial=82260 08:42:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:42:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:42:01 Point started: ret=0 08:42:01 point_skyscan result=0 08:42:02 Check angles 08:42:02 SkyScan query 08:42:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 08:42:03 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 08:42:03 Check angles 08:42:03 SkyScan query 08:42:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.16<-14944 Statuses=0008 0009 08:42:03 Msec=750 True Az=112.995 Ze=-44.16 Az status=0008 Ze status=0009 08:42:04 Check angles 08:42:04 SkyScan query 08:42:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 08:42:04 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 08:42:04 Check angles 08:42:04 SkyScan query 08:42:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.07<-17738 Statuses=0008 0009 08:42:05 Msec=2250 True Az=112.995 Ze=-86.07 Az status=0008 Ze status=0009 08:42:05 Check angles 08:42:05 SkyScan query 08:42:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.445<-19163 Statuses=0008 0009 08:42:06 Msec=3000 True Az=112.995 Ze=-107.445 Az status=0008 Ze status=0009 08:42:06 Check angles 08:42:06 SkyScan query 08:42:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.385<-20559 Statuses=0008 0009 08:42:06 Msec=3750 True Az=112.995 Ze=-128.385 Az status=0008 Ze status=0009 08:42:07 Check angles 08:42:07 SkyScan query 08:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.355<-21957 Statuses=0008 0009 08:42:07 Msec=4500 True Az=112.995 Ze=-149.355 Az status=0008 Ze status=0009 08:42:07 Check angles 08:42:07 SkyScan query 08:42:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.67<-23378 Statuses=0008 0009 08:42:08 Msec=5250 True Az=112.995 Ze=-170.67 Az status=0008 Ze status=0009 08:42:08 Check angles 08:42:08 SkyScan query 08:42:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:42:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:42:09 Message to Master queued w/err=0: serial=82260 error=0 08:42:14 Received message from Master: op=Filter serial=82261 08:42:14 Color wheel filter change from 0 to 0 08:42:14 FLIGetFilterPos err=0 currentPosition=0 08:42:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:14 Filter is already there-color wheel unchanged 08:42:14 Received message from Master: op=Shutter serial=82262 08:42:14 Shutter LASER open 08:42:14 Received message from Camera: op=State serial=82264 08:42:14 GetSingleValue result=40 Value=cccccccc 08:42:14 SkyScan query 08:42:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:42:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:15 Parameters OK 08:42:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:15 Set A/D data flow result=40 08:42:15 Set A/D channel type result=40 08:42:15 Set A/D encoding result=40 08:42:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:15 Set channel filter=0.000000e+000 result=40 08:42:15 Config A/D Result=40 08:42:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:15 Get A/D filter: -9.255963e+061 result=40 08:42:15 Get A/D value=-858993460 result=40 08:42:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:15 Parameters OK 08:42:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:15 Set A/D data flow result=40 08:42:15 Set A/D channel type result=40 08:42:15 Set A/D encoding result=40 08:42:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:15 Set channel filter=0.000000e+000 result=40 08:42:15 Config A/D Result=40 08:42:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:15 Get A/D filter: -9.255963e+061 result=40 08:42:15 Get A/D value=-858993460 result=40 08:42:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:15 Aux= 08:42:15 Message to Camera, serial 82264 queued 08:42:23 Received message from Master: op=Shutter serial=82274 08:42:23 Shutter LASER close 08:42:23 Received message from Master: op=PointingHead serial=82278 08:42:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:42:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:42:24 Point started: ret=0 08:42:24 point_skyscan result=0 08:42:25 Check angles 08:42:25 SkyScan query 08:42:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 08:42:25 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 08:42:25 Check angles 08:42:25 SkyScan query 08:42:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 08:42:26 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 08:42:26 Check angles 08:42:26 SkyScan query 08:42:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 08:42:27 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 08:42:27 Check angles 08:42:27 SkyScan query 08:42:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.325<-17355 Statuses=0008 0009 08:42:27 Msec=2250 True Az=112.995 Ze=-80.325 Az status=0008 Ze status=0009 08:42:28 Check angles 08:42:28 SkyScan query 08:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.95<-15930 Statuses=0008 0009 08:42:28 Msec=3000 True Az=112.995 Ze=-58.95 Az status=0008 Ze status=0009 08:42:28 Check angles 08:42:28 SkyScan query 08:42:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 08:42:29 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 08:42:29 Check angles 08:42:29 SkyScan query 08:42:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.025<-13135 Statuses=0008 0009 08:42:30 Msec=4500 True Az=112.995 Ze=-17.025 Az status=0008 Ze status=0009 08:42:30 Check angles 08:42:30 SkyScan query 08:42:30 SkyScan query done: ret=0 az=112.995<-7533 ze=4.29<-11714 Statuses=0008 0009 08:42:30 Msec=5250 True Az=112.995 Ze=4.29 Az status=0008 Ze status=0009 08:42:31 Check angles 08:42:31 SkyScan query 08:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:42:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:42:31 Message to Master queued w/err=0: serial=82278 error=0 08:42:36 Received message from Master: op=Filter serial=82279 08:42:36 Color wheel filter change from 0 to 0 08:42:36 FLIGetFilterPos err=0 currentPosition=0 08:42:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:36 Filter is already there-color wheel unchanged 08:42:36 Received message from Master: op=Shutter serial=82280 08:42:36 Shutter LASER close 08:42:37 Received message from Camera: op=State serial=82282 08:42:37 GetSingleValue result=40 Value=cccccccc 08:42:37 SkyScan query 08:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:42:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:37 Parameters OK 08:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:37 Set A/D data flow result=40 08:42:37 Set A/D channel type result=40 08:42:37 Set A/D encoding result=40 08:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:37 Set channel filter=0.000000e+000 result=40 08:42:37 Config A/D Result=40 08:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:37 Get A/D filter: -9.255963e+061 result=40 08:42:37 Get A/D value=-858993460 result=40 08:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:37 Parameters OK 08:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:37 Set A/D data flow result=40 08:42:37 Set A/D channel type result=40 08:42:37 Set A/D encoding result=40 08:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:37 Set channel filter=0.000000e+000 result=40 08:42:37 Config A/D Result=40 08:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:37 Get A/D filter: -9.255963e+061 result=40 08:42:37 Get A/D value=-858993460 result=40 08:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:37 Aux= 08:42:37 Message to Camera, serial 82282 queued 08:43:14 Received message from Master: op=PointingHead serial=82295 08:43:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:43:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:43:14 Point started: ret=0 08:43:14 point_skyscan result=0 08:43:15 Check angles 08:43:15 SkyScan query 08:43:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:43:16 Message to Master queued w/err=0: serial=82295 error=0 08:43:21 Received message from Master: op=Filter serial=82296 08:43:21 Color wheel filter change from 0 to 0 08:43:21 FLIGetFilterPos err=0 currentPosition=0 08:43:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:21 Filter is already there-color wheel unchanged 08:43:21 Received message from Master: op=Shutter serial=82297 08:43:21 Shutter LASER close 08:43:21 Received message from Camera: op=State serial=82299 08:43:21 GetSingleValue result=40 Value=cccccccc 08:43:21 SkyScan query 08:43:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:21 Parameters OK 08:43:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:21 Set A/D data flow result=40 08:43:21 Set A/D channel type result=40 08:43:21 Set A/D encoding result=40 08:43:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:21 Set channel filter=0.000000e+000 result=40 08:43:21 Config A/D Result=40 08:43:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:21 Get A/D filter: -9.255963e+061 result=40 08:43:21 Get A/D value=-858993460 result=40 08:43:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:21 Parameters OK 08:43:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:21 Set A/D data flow result=40 08:43:21 Set A/D channel type result=40 08:43:21 Set A/D encoding result=40 08:43:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:21 Set channel filter=0.000000e+000 result=40 08:43:21 Config A/D Result=40 08:43:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:21 Get A/D filter: -9.255963e+061 result=40 08:43:21 Get A/D value=-858993460 result=40 08:43:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:21 Aux= 08:43:21 Message to Camera, serial 82299 queued [UTC 2019-3-3 08:43:50] 08:43:58 Received message from Master: op=PointingHead serial=82312 08:43:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:43:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:43:59 Point started: ret=0 08:43:59 point_skyscan result=0 08:43:59 Check angles 08:43:59 SkyScan query 08:44:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:44:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:44:00 Message to Master queued w/err=0: serial=82312 error=0 08:44:05 Received message from Master: op=Filter serial=82313 08:44:05 Color wheel filter change from 0 to 0 08:44:05 FLIGetFilterPos err=0 currentPosition=0 08:44:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:05 Filter is already there-color wheel unchanged 08:44:05 Received message from Master: op=Shutter serial=82314 08:44:05 Shutter LASER close 08:44:05 Received message from Camera: op=State serial=82316 08:44:05 GetSingleValue result=40 Value=cccccccc 08:44:05 SkyScan query 08:44:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:44:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:06 Parameters OK 08:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:06 Set A/D data flow result=40 08:44:06 Set A/D channel type result=40 08:44:06 Set A/D encoding result=40 08:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:06 Set channel filter=0.000000e+000 result=40 08:44:06 Config A/D Result=40 08:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:06 Get A/D filter: -9.255963e+061 result=40 08:44:06 Get A/D value=-858993460 result=40 08:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:06 Parameters OK 08:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:06 Set A/D data flow result=40 08:44:06 Set A/D channel type result=40 08:44:06 Set A/D encoding result=40 08:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:06 Set channel filter=0.000000e+000 result=40 08:44:06 Config A/D Result=40 08:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:06 Get A/D filter: -9.255963e+061 result=40 08:44:06 Get A/D value=-858993460 result=40 08:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:06 Aux= 08:44:06 Message to Camera, serial 82316 queued 08:44:43 Received message from Master: op=PointingHead serial=82329 08:44:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:44:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:44:43 Point started: ret=0 08:44:43 point_skyscan result=0 08:44:44 Check angles 08:44:44 SkyScan query 08:44:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:44:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:44:44 Message to Master queued w/err=0: serial=82329 error=0 08:44:49 Received message from Master: op=Filter serial=82330 08:44:49 Color wheel filter change from 0 to 0 08:44:49 FLIGetFilterPos err=0 currentPosition=0 08:44:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:49 Filter is already there-color wheel unchanged 08:44:49 Received message from Master: op=Shutter serial=82331 08:44:49 Shutter LASER close 08:44:49 Received message from Camera: op=State serial=82333 08:44:49 GetSingleValue result=40 Value=cccccccc 08:44:49 SkyScan query 08:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:44:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:50 Parameters OK 08:44:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:50 Set A/D data flow result=40 08:44:50 Set A/D channel type result=40 08:44:50 Set A/D encoding result=40 08:44:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:50 Set channel filter=0.000000e+000 result=40 08:44:50 Config A/D Result=40 08:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:50 Get A/D filter: -9.255963e+061 result=40 08:44:50 Get A/D value=-858993460 result=40 08:44:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:50 Parameters OK 08:44:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:50 Set A/D data flow result=40 08:44:50 Set A/D channel type result=40 08:44:50 Set A/D encoding result=40 08:44:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:50 Set channel filter=0.000000e+000 result=40 08:44:50 Config A/D Result=40 08:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:50 Get A/D filter: -9.255963e+061 result=40 08:44:50 Get A/D value=-858993460 result=40 08:44:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:50 Aux= 08:44:50 Message to Camera, serial 82333 queued 08:45:27 Received message from Master: op=PointingHead serial=82346 08:45:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:45:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:45:27 Point started: ret=0 08:45:27 point_skyscan result=0 08:45:28 Check angles 08:45:28 SkyScan query 08:45:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 08:45:29 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 08:45:29 Check angles 08:45:29 SkyScan query 08:45:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 08:45:29 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 08:45:29 Check angles 08:45:29 SkyScan query 08:45:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 08:45:30 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 08:45:30 Check angles 08:45:30 SkyScan query 08:45:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 08:45:31 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 08:45:31 Check angles 08:45:31 SkyScan query 08:45:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.61<-19174 Statuses=0008 0009 08:45:32 Msec=3000 True Az=112.995 Ze=-107.61 Az status=0008 Ze status=0009 08:45:32 Check angles 08:45:32 SkyScan query 08:45:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.535<-20569 Statuses=0008 0009 08:45:32 Msec=3750 True Az=112.995 Ze=-128.535 Az status=0008 Ze status=0009 08:45:32 Check angles 08:45:32 SkyScan query 08:45:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.505<-21967 Statuses=0008 0009 08:45:33 Msec=4500 True Az=112.995 Ze=-149.505 Az status=0008 Ze status=0009 08:45:33 Check angles 08:45:33 SkyScan query 08:45:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.445<-23363 Statuses=0008 0009 08:45:34 Msec=5250 True Az=112.995 Ze=-170.445 Az status=0008 Ze status=0009 08:45:34 Check angles 08:45:34 SkyScan query 08:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:45:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:45:35 Message to Master queued w/err=0: serial=82346 error=0 08:45:40 Received message from Master: op=Filter serial=82347 08:45:40 Color wheel filter change from 0 to 0 08:45:40 FLIGetFilterPos err=0 currentPosition=0 08:45:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:40 Filter is already there-color wheel unchanged 08:45:40 Received message from Master: op=Shutter serial=82348 08:45:40 Shutter LASER open 08:45:40 Received message from Camera: op=State serial=82350 08:45:40 GetSingleValue result=40 Value=cccccccc 08:45:40 SkyScan query 08:45:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:45:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:40 Parameters OK 08:45:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:40 Set A/D data flow result=40 08:45:40 Set A/D channel type result=40 08:45:40 Set A/D encoding result=40 08:45:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:40 Set channel filter=0.000000e+000 result=40 08:45:40 Config A/D Result=40 08:45:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:40 Get A/D filter: -9.255963e+061 result=40 08:45:40 Get A/D value=-858993460 result=40 08:45:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:40 Parameters OK 08:45:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:40 Set A/D data flow result=40 08:45:40 Set A/D channel type result=40 08:45:40 Set A/D encoding result=40 08:45:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:40 Set channel filter=0.000000e+000 result=40 08:45:40 Config A/D Result=40 08:45:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:40 Get A/D filter: -9.255963e+061 result=40 08:45:40 Get A/D value=-858993460 result=40 08:45:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:40 Aux= 08:45:40 Message to Camera, serial 82350 queued 08:45:49 Received message from Master: op=Shutter serial=82360 08:45:49 Shutter LASER close 08:45:49 Received message from Master: op=PointingHead serial=82364 08:45:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:45:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:45:50 Point started: ret=0 08:45:50 point_skyscan result=0 08:45:51 Check angles 08:45:51 SkyScan query 08:45:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.68<-21512 Statuses=0008 0009 08:45:51 Msec=0 True Az=112.995 Ze=-142.68 Az status=0008 Ze status=0009 08:45:51 Check angles 08:45:51 SkyScan query 08:45:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.71<-20114 Statuses=0008 0009 08:45:52 Msec=750 True Az=112.995 Ze=-121.71 Az status=0008 Ze status=0009 08:45:52 Check angles 08:45:52 SkyScan query 08:45:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 08:45:53 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 08:45:53 Check angles 08:45:53 SkyScan query 08:45:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.83<-17322 Statuses=0008 0009 08:45:53 Msec=2250 True Az=112.995 Ze=-79.83 Az status=0008 Ze status=0009 08:45:54 Check angles 08:45:54 SkyScan query 08:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.875<-15925 Statuses=0008 0009 08:45:54 Msec=3000 True Az=112.995 Ze=-58.875 Az status=0008 Ze status=0009 08:45:54 Check angles 08:45:54 SkyScan query 08:45:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 08:45:55 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 08:45:55 Check angles 08:45:55 SkyScan query 08:45:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.5<-13100 Statuses=0008 0009 08:45:56 Msec=4500 True Az=112.995 Ze=-16.5 Az status=0008 Ze status=0009 08:45:56 Check angles 08:45:56 SkyScan query 08:45:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.365<-11709 Statuses=0008 0009 08:45:56 Msec=5250 True Az=112.995 Ze=4.365 Az status=0008 Ze status=0009 08:45:57 Check angles 08:45:57 SkyScan query 08:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:45:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:45:57 Message to Master queued w/err=0: serial=82364 error=0 08:46:02 Received message from Master: op=Filter serial=82365 08:46:02 Color wheel filter change from 0 to 0 08:46:02 FLIGetFilterPos err=0 currentPosition=0 08:46:02 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:02 Filter is already there-color wheel unchanged 08:46:02 Received message from Master: op=Shutter serial=82366 08:46:02 Shutter LASER close 08:46:03 Received message from Camera: op=State serial=82368 08:46:03 GetSingleValue result=40 Value=cccccccc 08:46:03 SkyScan query 08:46:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:46:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:03 Parameters OK 08:46:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:03 Set A/D data flow result=40 08:46:03 Set A/D channel type result=40 08:46:03 Set A/D encoding result=40 08:46:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:03 Set channel filter=0.000000e+000 result=40 08:46:03 Config A/D Result=40 08:46:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:03 Get A/D filter: -9.255963e+061 result=40 08:46:03 Get A/D value=-858993460 result=40 08:46:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:03 Parameters OK 08:46:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:03 Set A/D data flow result=40 08:46:03 Set A/D channel type result=40 08:46:03 Set A/D encoding result=40 08:46:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:03 Set channel filter=0.000000e+000 result=40 08:46:03 Config A/D Result=40 08:46:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:03 Get A/D filter: -9.255963e+061 result=40 08:46:03 Get A/D value=-858993460 result=40 08:46:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:03 Aux= 08:46:03 Message to Camera, serial 82368 queued 08:46:40 Received message from Master: op=PointingHead serial=82381 08:46:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:46:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:46:40 Point started: ret=0 08:46:40 point_skyscan result=0 08:46:41 Check angles 08:46:41 SkyScan query 08:46:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:46:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:46:42 Message to Master queued w/err=0: serial=82381 error=0 08:46:47 Received message from Master: op=Filter serial=82382 08:46:47 Color wheel filter change from 0 to 0 08:46:47 FLIGetFilterPos err=0 currentPosition=0 08:46:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:47 Filter is already there-color wheel unchanged 08:46:47 Received message from Master: op=Shutter serial=82383 08:46:47 Shutter LASER close 08:46:47 Received message from Camera: op=State serial=82385 08:46:47 GetSingleValue result=40 Value=cccccccc 08:46:47 SkyScan query 08:46:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:46:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:47 Parameters OK 08:46:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:47 Set A/D data flow result=40 08:46:47 Set A/D channel type result=40 08:46:47 Set A/D encoding result=40 08:46:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:47 Set channel filter=0.000000e+000 result=40 08:46:47 Config A/D Result=40 08:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:47 Get A/D filter: -9.255963e+061 result=40 08:46:47 Get A/D value=-858993460 result=40 08:46:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:47 Parameters OK 08:46:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:47 Set A/D data flow result=40 08:46:47 Set A/D channel type result=40 08:46:47 Set A/D encoding result=40 08:46:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:47 Set channel filter=0.000000e+000 result=40 08:46:47 Config A/D Result=40 08:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:47 Get A/D filter: -9.255963e+061 result=40 08:46:47 Get A/D value=-858993460 result=40 08:46:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:47 Aux= 08:46:47 Message to Camera, serial 82385 queued 08:47:24 Received message from Master: op=PointingHead serial=82398 08:47:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:47:24 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:47:25 Point started: ret=0 08:47:25 point_skyscan result=0 08:47:25 Check angles 08:47:25 SkyScan query 08:47:26 SkyScan query done: ret=0 az=135.825<-9055 ze=-6.51<-12434 Statuses=0009 0008 08:47:26 Msec=0 True Az=135.825 Ze=-6.51 Az status=0009 Ze status=0008 08:47:26 Check angles 08:47:26 SkyScan query 08:47:27 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.495<-12433 Statuses=0009 0008 08:47:27 Msec=750 True Az=153.285 Ze=-6.495 Az status=0009 Ze status=0008 08:47:27 Check angles 08:47:27 SkyScan query 08:47:27 SkyScan query done: ret=0 az=170.775<-11385 ze=-6.495<-12433 Statuses=0009 0008 08:47:27 Msec=1500 True Az=170.775 Ze=-6.495 Az status=0009 Ze status=0008 08:47:28 Check angles 08:47:28 SkyScan query 08:47:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:47:28 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:47:28 Message to Master queued w/err=0: serial=82398 error=0 08:47:33 Received message from Master: op=Filter serial=82399 08:47:33 Color wheel filter change from 0 to 0 08:47:33 FLIGetFilterPos err=0 currentPosition=0 08:47:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:33 Filter is already there-color wheel unchanged 08:47:33 Received message from Master: op=Shutter serial=82400 08:47:33 Shutter LASER close 08:47:33 Received message from Camera: op=State serial=82402 08:47:33 GetSingleValue result=40 Value=cccccccc 08:47:33 SkyScan query 08:47:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:47:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:34 Parameters OK 08:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:34 Set A/D data flow result=40 08:47:34 Set A/D channel type result=40 08:47:34 Set A/D encoding result=40 08:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:34 Set channel filter=0.000000e+000 result=40 08:47:34 Config A/D Result=40 08:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:34 Get A/D filter: -9.255963e+061 result=40 08:47:34 Get A/D value=-858993460 result=40 08:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:34 Parameters OK 08:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:34 Set A/D data flow result=40 08:47:34 Set A/D channel type result=40 08:47:34 Set A/D encoding result=40 08:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:34 Set channel filter=0.000000e+000 result=40 08:47:34 Config A/D Result=40 08:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:34 Get A/D filter: -9.255963e+061 result=40 08:47:34 Get A/D value=-858993460 result=40 08:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:34 Aux= 08:47:34 Message to Camera, serial 82402 queued 08:48:11 Received message from Master: op=PointingHead serial=82415 08:48:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:48:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:48:11 Point started: ret=0 08:48:11 point_skyscan result=0 08:48:12 Check angles 08:48:12 SkyScan query 08:48:12 SkyScan query done: ret=0 az=153.03<-10202 ze=6.51<-11566 Statuses=0009 0008 08:48:12 Msec=0 True Az=153.03 Ze=6.51 Az status=0009 Ze status=0008 08:48:13 Check angles 08:48:13 SkyScan query 08:48:13 SkyScan query done: ret=0 az=135.195<-9013 ze=6.495<-11567 Statuses=0009 0008 08:48:13 Msec=750 True Az=135.195 Ze=6.495 Az status=0009 Ze status=0008 08:48:13 Check angles 08:48:13 SkyScan query 08:48:14 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 08:48:14 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 08:48:14 Check angles 08:48:14 SkyScan query 08:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:48:15 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:48:15 Message to Master queued w/err=0: serial=82415 error=0 08:48:20 Received message from Master: op=Filter serial=82416 08:48:20 Color wheel filter change from 0 to 0 08:48:20 FLIGetFilterPos err=0 currentPosition=0 08:48:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:20 Filter is already there-color wheel unchanged 08:48:20 Received message from Master: op=Shutter serial=82417 08:48:20 Shutter LASER close 08:48:20 Received message from Camera: op=State serial=82419 08:48:20 GetSingleValue result=40 Value=cccccccc 08:48:20 SkyScan query 08:48:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:48:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:20 Parameters OK 08:48:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:20 Set A/D data flow result=40 08:48:20 Set A/D channel type result=40 08:48:20 Set A/D encoding result=40 08:48:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:20 Set channel filter=0.000000e+000 result=40 08:48:20 Config A/D Result=40 08:48:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:20 Get A/D filter: -9.255963e+061 result=40 08:48:20 Get A/D value=-858993460 result=40 08:48:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:20 Parameters OK 08:48:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:20 Set A/D data flow result=40 08:48:20 Set A/D channel type result=40 08:48:20 Set A/D encoding result=40 08:48:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:20 Set channel filter=0.000000e+000 result=40 08:48:20 Config A/D Result=40 08:48:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:20 Get A/D filter: -9.255963e+061 result=40 08:48:20 Get A/D value=-858993460 result=40 08:48:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:20 Aux= 08:48:20 Message to Camera, serial 82419 queued 08:48:56 Received message from Master: op=PointingHead serial=82431 08:48:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:48:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:48:57 Point started: ret=0 08:48:57 point_skyscan result=0 08:48:57 Check angles 08:48:57 SkyScan query 08:48:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 08:48:58 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 08:48:58 Check angles 08:48:58 SkyScan query 08:48:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.015<-15001 Statuses=0008 0009 08:48:59 Msec=750 True Az=112.995 Ze=-45.015 Az status=0008 Ze status=0009 08:48:59 Check angles 08:48:59 SkyScan query 08:49:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.97<-16398 Statuses=0008 0009 08:49:00 Msec=1500 True Az=112.995 Ze=-65.97 Az status=0008 Ze status=0009 08:49:00 Check angles 08:49:00 SkyScan query 08:49:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 08:49:00 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 08:49:00 Check angles 08:49:00 SkyScan query 08:49:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 08:49:01 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 08:49:01 Check angles 08:49:01 SkyScan query 08:49:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 08:49:02 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 08:49:02 Check angles 08:49:02 SkyScan query 08:49:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.775<-21985 Statuses=0008 0009 08:49:03 Msec=4500 True Az=112.995 Ze=-149.775 Az status=0008 Ze status=0009 08:49:03 Check angles 08:49:03 SkyScan query 08:49:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.7<-23380 Statuses=0008 0009 08:49:03 Msec=5250 True Az=112.995 Ze=-170.7 Az status=0008 Ze status=0009 08:49:03 Check angles 08:49:03 SkyScan query 08:49:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:49:04 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:49:04 Message to Master queued w/err=0: serial=82431 error=0 08:49:09 Received message from Master: op=Filter serial=82432 08:49:09 Color wheel filter change from 0 to 0 08:49:09 FLIGetFilterPos err=0 currentPosition=0 08:49:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:09 Filter is already there-color wheel unchanged 08:49:09 Received message from Master: op=Shutter serial=82433 08:49:09 Shutter LASER open 08:49:09 Received message from Camera: op=State serial=82435 08:49:09 GetSingleValue result=40 Value=cccccccc 08:49:09 SkyScan query 08:49:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:49:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:10 Parameters OK 08:49:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:10 Set A/D data flow result=40 08:49:10 Set A/D channel type result=40 08:49:10 Set A/D encoding result=40 08:49:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:10 Set channel filter=0.000000e+000 result=40 08:49:10 Config A/D Result=40 08:49:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:10 Get A/D filter: -9.255963e+061 result=40 08:49:10 Get A/D value=-858993460 result=40 08:49:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:10 Parameters OK 08:49:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:10 Set A/D data flow result=40 08:49:10 Set A/D channel type result=40 08:49:10 Set A/D encoding result=40 08:49:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:10 Set channel filter=0.000000e+000 result=40 08:49:10 Config A/D Result=40 08:49:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:10 Get A/D filter: -9.255963e+061 result=40 08:49:10 Get A/D value=-858993460 result=40 08:49:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:10 Aux= 08:49:10 Message to Camera, serial 82435 queued 08:49:18 Received message from Master: op=Shutter serial=82445 08:49:18 Shutter LASER close 08:49:19 Received message from Master: op=PointingHead serial=82449 08:49:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:49:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:49:19 Point started: ret=0 08:49:19 point_skyscan result=0 08:49:20 Check angles 08:49:20 SkyScan query 08:49:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 08:49:20 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 08:49:21 Check angles 08:49:21 SkyScan query 08:49:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.95<-20130 Statuses=0008 0009 08:49:21 Msec=750 True Az=112.995 Ze=-121.95 Az status=0008 Ze status=0009 08:49:21 Check angles 08:49:21 SkyScan query 08:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 08:49:22 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 08:49:22 Check angles 08:49:22 SkyScan query 08:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.07<-17338 Statuses=0008 0009 08:49:23 Msec=2250 True Az=112.995 Ze=-80.07 Az status=0008 Ze status=0009 08:49:23 Check angles 08:49:23 SkyScan query 08:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.13<-15942 Statuses=0008 0009 08:49:23 Msec=3000 True Az=112.995 Ze=-59.13 Az status=0008 Ze status=0009 08:49:24 Check angles 08:49:24 SkyScan query 08:49:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 08:49:24 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 08:49:24 Check angles 08:49:24 SkyScan query 08:49:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.205<-13147 Statuses=0008 0009 08:49:25 Msec=4500 True Az=112.995 Ze=-17.205 Az status=0008 Ze status=0009 08:49:25 Check angles 08:49:25 SkyScan query 08:49:26 SkyScan query done: ret=0 az=112.995<-7533 ze=3.765<-11749 Statuses=0008 0009 08:49:26 Msec=5250 True Az=112.995 Ze=3.765 Az status=0008 Ze status=0009 08:49:26 Check angles 08:49:26 SkyScan query 08:49:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:49:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:49:26 Message to Master queued w/err=0: serial=82449 error=0 08:49:31 Received message from Master: op=Filter serial=82450 08:49:31 Color wheel filter change from 0 to 0 08:49:31 FLIGetFilterPos err=0 currentPosition=0 08:49:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:31 Filter is already there-color wheel unchanged 08:49:32 Received message from Master: op=Shutter serial=82451 08:49:32 Shutter LASER close 08:49:32 Received message from Camera: op=State serial=82453 08:49:32 GetSingleValue result=40 Value=cccccccc 08:49:32 SkyScan query 08:49:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:49:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:32 Parameters OK 08:49:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:32 Set A/D data flow result=40 08:49:32 Set A/D channel type result=40 08:49:32 Set A/D encoding result=40 08:49:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:32 Set channel filter=0.000000e+000 result=40 08:49:32 Config A/D Result=40 08:49:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:32 Get A/D filter: -9.255963e+061 result=40 08:49:32 Get A/D value=-858993460 result=40 08:49:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:32 Parameters OK 08:49:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:32 Set A/D data flow result=40 08:49:32 Set A/D channel type result=40 08:49:32 Set A/D encoding result=40 08:49:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:32 Set channel filter=0.000000e+000 result=40 08:49:32 Config A/D Result=40 08:49:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:32 Get A/D filter: -9.255963e+061 result=40 08:49:32 Get A/D value=-858993460 result=40 08:49:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:32 Aux= 08:49:32 Message to Camera, serial 82453 queued 08:50:08 Received message from Master: op=PointingHead serial=82465 08:50:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:50:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:50:09 Point started: ret=0 08:50:09 point_skyscan result=0 08:50:09 Check angles 08:50:09 SkyScan query 08:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:50:10 Message to Master queued w/err=0: serial=82465 error=0 08:50:15 Received message from Master: op=Filter serial=82466 08:50:15 Color wheel filter change from 0 to 0 08:50:15 FLIGetFilterPos err=0 currentPosition=0 08:50:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:15 Filter is already there-color wheel unchanged 08:50:15 Received message from Master: op=Shutter serial=82467 08:50:15 Shutter LASER close 08:50:15 Received message from Camera: op=State serial=82469 08:50:15 GetSingleValue result=40 Value=cccccccc 08:50:15 SkyScan query 08:50:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:16 Parameters OK 08:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:16 Set A/D data flow result=40 08:50:16 Set A/D channel type result=40 08:50:16 Set A/D encoding result=40 08:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:16 Set channel filter=0.000000e+000 result=40 08:50:16 Config A/D Result=40 08:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:16 Get A/D filter: -9.255963e+061 result=40 08:50:16 Get A/D value=-858993460 result=40 08:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:16 Parameters OK 08:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:16 Set A/D data flow result=40 08:50:16 Set A/D channel type result=40 08:50:16 Set A/D encoding result=40 08:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:16 Set channel filter=0.000000e+000 result=40 08:50:16 Config A/D Result=40 08:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:16 Get A/D filter: -9.255963e+061 result=40 08:50:16 Get A/D value=-858993460 result=40 08:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:16 Aux= 08:50:16 Message to Camera, serial 82469 queued 08:50:53 Received message from Master: op=PointingHead serial=82482 08:50:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:50:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:50:53 Point started: ret=0 08:50:53 point_skyscan result=0 08:50:54 Check angles 08:50:54 SkyScan query 08:50:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:50:54 Message to Master queued w/err=0: serial=82482 error=0 08:50:59 Received message from Master: op=Filter serial=82483 08:50:59 Color wheel filter change from 0 to 0 08:50:59 FLIGetFilterPos err=0 currentPosition=0 08:50:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:59 Filter is already there-color wheel unchanged 08:50:59 Received message from Master: op=Shutter serial=82484 08:50:59 Shutter LASER close 08:50:59 Received message from Camera: op=State serial=82486 08:50:59 GetSingleValue result=40 Value=cccccccc 08:50:59 SkyScan query 08:51:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:51:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:00 Parameters OK 08:51:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:00 Set A/D data flow result=40 08:51:00 Set A/D channel type result=40 08:51:00 Set A/D encoding result=40 08:51:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:00 Set channel filter=0.000000e+000 result=40 08:51:00 Config A/D Result=40 08:51:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:00 Get A/D filter: -9.255963e+061 result=40 08:51:00 Get A/D value=-858993460 result=40 08:51:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:00 Parameters OK 08:51:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:00 Set A/D data flow result=40 08:51:00 Set A/D channel type result=40 08:51:00 Set A/D encoding result=40 08:51:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:00 Set channel filter=0.000000e+000 result=40 08:51:00 Config A/D Result=40 08:51:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:00 Get A/D filter: -9.255963e+061 result=40 08:51:00 Get A/D value=-858993460 result=40 08:51:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:00 Aux= 08:51:00 Message to Camera, serial 82486 queued 08:51:37 Received message from Master: op=PointingHead serial=82499 08:51:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:51:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:51:37 Point started: ret=0 08:51:37 point_skyscan result=0 08:51:38 Check angles 08:51:38 SkyScan query 08:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:51:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:51:39 Message to Master queued w/err=0: serial=82499 error=0 08:51:44 Received message from Master: op=Filter serial=82500 08:51:44 Color wheel filter change from 0 to 0 08:51:44 FLIGetFilterPos err=0 currentPosition=0 08:51:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:44 Filter is already there-color wheel unchanged 08:51:44 Received message from Master: op=Shutter serial=82501 08:51:44 Shutter LASER close 08:51:44 Received message from Camera: op=State serial=82503 08:51:44 GetSingleValue result=40 Value=cccccccc 08:51:44 SkyScan query 08:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:51:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:44 Parameters OK 08:51:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:44 Set A/D data flow result=40 08:51:44 Set A/D channel type result=40 08:51:44 Set A/D encoding result=40 08:51:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:44 Set channel filter=0.000000e+000 result=40 08:51:44 Config A/D Result=40 08:51:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:44 Get A/D filter: -9.255963e+061 result=40 08:51:44 Get A/D value=-858993460 result=40 08:51:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:44 Parameters OK 08:51:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:44 Set A/D data flow result=40 08:51:44 Set A/D channel type result=40 08:51:44 Set A/D encoding result=40 08:51:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:44 Set channel filter=0.000000e+000 result=40 08:51:44 Config A/D Result=40 08:51:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:44 Get A/D filter: -9.255963e+061 result=40 08:51:44 Get A/D value=-858993460 result=40 08:51:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:44 Aux= 08:51:44 Message to Camera, serial 82503 queued 08:52:21 Received message from Master: op=PointingHead serial=82516 08:52:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:52:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:52:22 Point started: ret=0 08:52:22 point_skyscan result=0 08:52:22 Check angles 08:52:22 SkyScan query 08:52:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 08:52:23 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 08:52:23 Check angles 08:52:23 SkyScan query 08:52:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.045<-15003 Statuses=0008 0009 08:52:24 Msec=750 True Az=112.995 Ze=-45.045 Az status=0008 Ze status=0009 08:52:24 Check angles 08:52:24 SkyScan query 08:52:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.435<-16429 Statuses=0008 0009 08:52:24 Msec=1500 True Az=112.995 Ze=-66.435 Az status=0008 Ze status=0009 08:52:25 Check angles 08:52:25 SkyScan query 08:52:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.39<-17826 Statuses=0008 0009 08:52:25 Msec=2250 True Az=112.995 Ze=-87.39 Az status=0008 Ze status=0009 08:52:25 Check angles 08:52:25 SkyScan query 08:52:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.33<-19222 Statuses=0008 0009 08:52:26 Msec=3000 True Az=112.995 Ze=-108.33 Az status=0008 Ze status=0009 08:52:26 Check angles 08:52:26 SkyScan query 08:52:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.3<-20620 Statuses=0008 0009 08:52:27 Msec=3750 True Az=112.995 Ze=-129.3 Az status=0008 Ze status=0009 08:52:27 Check angles 08:52:27 SkyScan query 08:52:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.255<-22017 Statuses=0008 0009 08:52:27 Msec=4500 True Az=112.995 Ze=-150.255 Az status=0008 Ze status=0009 08:52:28 Check angles 08:52:28 SkyScan query 08:52:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 08:52:28 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 08:52:28 Check angles 08:52:28 SkyScan query 08:52:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:52:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:52:29 Message to Master queued w/err=0: serial=82516 error=0 08:52:34 Received message from Master: op=Filter serial=82517 08:52:34 Color wheel filter change from 0 to 0 08:52:34 FLIGetFilterPos err=0 currentPosition=0 08:52:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:34 Filter is already there-color wheel unchanged 08:52:34 Received message from Master: op=Shutter serial=82518 08:52:34 Shutter LASER open 08:52:34 Received message from Camera: op=State serial=82520 08:52:34 GetSingleValue result=40 Value=cccccccc 08:52:34 SkyScan query 08:52:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:52:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:35 Parameters OK 08:52:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:35 Set A/D data flow result=40 08:52:35 Set A/D channel type result=40 08:52:35 Set A/D encoding result=40 08:52:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:35 Set channel filter=0.000000e+000 result=40 08:52:35 Config A/D Result=40 08:52:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:35 Get A/D filter: -9.255963e+061 result=40 08:52:35 Get A/D value=-858993460 result=40 08:52:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:35 Parameters OK 08:52:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:35 Set A/D data flow result=40 08:52:35 Set A/D channel type result=40 08:52:35 Set A/D encoding result=40 08:52:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:35 Set channel filter=0.000000e+000 result=40 08:52:35 Config A/D Result=40 08:52:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:35 Get A/D filter: -9.255963e+061 result=40 08:52:35 Get A/D value=-858993460 result=40 08:52:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:35 Aux= 08:52:35 Message to Camera, serial 82520 queued 08:52:43 Received message from Master: op=Shutter serial=82530 08:52:43 Shutter LASER close 08:52:44 Received message from Master: op=PointingHead serial=82534 08:52:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:52:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:52:44 Point started: ret=0 08:52:44 point_skyscan result=0 08:52:45 Check angles 08:52:45 SkyScan query 08:52:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 08:52:46 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 08:52:46 Check angles 08:52:46 SkyScan query 08:52:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.59<-20106 Statuses=0008 0009 08:52:46 Msec=750 True Az=112.995 Ze=-121.59 Az status=0008 Ze status=0009 08:52:46 Check angles 08:52:46 SkyScan query 08:52:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.635<-18709 Statuses=0008 0009 08:52:47 Msec=1500 True Az=112.995 Ze=-100.635 Az status=0008 Ze status=0009 08:52:47 Check angles 08:52:47 SkyScan query 08:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 08:52:48 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 08:52:48 Check angles 08:52:48 SkyScan query 08:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.755<-15917 Statuses=0008 0009 08:52:49 Msec=3000 True Az=112.995 Ze=-58.755 Az status=0008 Ze status=0009 08:52:49 Check angles 08:52:49 SkyScan query 08:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.785<-14519 Statuses=0008 0009 08:52:49 Msec=3750 True Az=112.995 Ze=-37.785 Az status=0008 Ze status=0009 08:52:49 Check angles 08:52:49 SkyScan query 08:52:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 08:52:50 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 08:52:50 Check angles 08:52:50 SkyScan query 08:52:51 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 08:52:51 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 08:52:51 Check angles 08:52:51 SkyScan query 08:52:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:52:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:52:52 Message to Master queued w/err=0: serial=82534 error=0 08:52:57 Received message from Master: op=Filter serial=82535 08:52:57 Color wheel filter change from 0 to 0 08:52:57 FLIGetFilterPos err=0 currentPosition=0 08:52:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:57 Filter is already there-color wheel unchanged 08:52:57 Received message from Master: op=Shutter serial=82536 08:52:57 Shutter LASER close 08:52:57 Received message from Camera: op=State serial=82538 08:52:57 GetSingleValue result=40 Value=cccccccc 08:52:57 SkyScan query 08:52:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:52:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:57 Parameters OK 08:52:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:57 Set A/D data flow result=40 08:52:57 Set A/D channel type result=40 08:52:57 Set A/D encoding result=40 08:52:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:57 Set channel filter=0.000000e+000 result=40 08:52:57 Config A/D Result=40 08:52:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:57 Get A/D filter: -9.255963e+061 result=40 08:52:57 Get A/D value=-858993460 result=40 08:52:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:57 Parameters OK 08:52:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:57 Set A/D data flow result=40 08:52:57 Set A/D channel type result=40 08:52:57 Set A/D encoding result=40 08:52:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:57 Set channel filter=0.000000e+000 result=40 08:52:57 Config A/D Result=40 08:52:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:57 Get A/D filter: -9.255963e+061 result=40 08:52:57 Get A/D value=-858993460 result=40 08:52:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:57 Aux= 08:52:57 Message to Camera, serial 82538 queued 08:53:34 Received message from Master: op=PointingHead serial=82551 08:53:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:53:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:53:35 Point started: ret=0 08:53:35 point_skyscan result=0 08:53:35 Check angles 08:53:35 SkyScan query 08:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:53:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:53:36 Message to Master queued w/err=0: serial=82551 error=0 08:53:41 Received message from Master: op=Filter serial=82552 08:53:41 Color wheel filter change from 0 to 0 08:53:41 FLIGetFilterPos err=0 currentPosition=0 08:53:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:41 Filter is already there-color wheel unchanged 08:53:41 Received message from Master: op=Shutter serial=82553 08:53:41 Shutter LASER close 08:53:41 Received message from Camera: op=State serial=82555 08:53:41 GetSingleValue result=40 Value=cccccccc 08:53:41 SkyScan query 08:53:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:53:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:42 Parameters OK 08:53:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:42 Set A/D data flow result=40 08:53:42 Set A/D channel type result=40 08:53:42 Set A/D encoding result=40 08:53:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:42 Set channel filter=0.000000e+000 result=40 08:53:42 Config A/D Result=40 08:53:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:42 Get A/D filter: -9.255963e+061 result=40 08:53:42 Get A/D value=-858993460 result=40 08:53:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:42 Parameters OK 08:53:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:42 Set A/D data flow result=40 08:53:42 Set A/D channel type result=40 08:53:42 Set A/D encoding result=40 08:53:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:42 Set channel filter=0.000000e+000 result=40 08:53:42 Config A/D Result=40 08:53:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:42 Get A/D filter: -9.255963e+061 result=40 08:53:42 Get A/D value=-858993460 result=40 08:53:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:42 Aux= 08:53:42 Message to Camera, serial 82555 queued 08:54:19 Received message from Master: op=PointingHead serial=82568 08:54:19 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:54:19 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:54:19 Point started: ret=0 08:54:19 point_skyscan result=0 08:54:20 Check angles 08:54:20 SkyScan query 08:54:20 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 08:54:20 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 08:54:20 Check angles 08:54:20 SkyScan query 08:54:21 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.495<-12433 Statuses=0009 0008 [UTC 2019-3-3 08:54:21] 08:54:21 Msec=750 True Az=153.345 Ze=-6.495 Az status=0009 Ze status=0008 08:54:21 Check angles 08:54:21 SkyScan query 08:54:22 SkyScan query done: ret=0 az=170.85<-11390 ze=-6.495<-12433 Statuses=0009 0008 08:54:22 Msec=1500 True Az=170.85 Ze=-6.495 Az status=0009 Ze status=0008 08:54:22 Check angles 08:54:22 SkyScan query 08:54:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:54:22 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:54:22 Message to Master queued w/err=0: serial=82568 error=0 08:54:27 Received message from Master: op=Filter serial=82569 08:54:27 Color wheel filter change from 0 to 0 08:54:27 FLIGetFilterPos err=0 currentPosition=0 08:54:27 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:27 Filter is already there-color wheel unchanged 08:54:28 Received message from Master: op=Shutter serial=82570 08:54:28 Shutter LASER close 08:54:28 Received message from Camera: op=State serial=82572 08:54:28 GetSingleValue result=40 Value=cccccccc 08:54:28 SkyScan query 08:54:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:54:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:28 Parameters OK 08:54:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:28 Set A/D data flow result=40 08:54:28 Set A/D channel type result=40 08:54:28 Set A/D encoding result=40 08:54:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:28 Set channel filter=0.000000e+000 result=40 08:54:28 Config A/D Result=40 08:54:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:28 Get A/D filter: -9.255963e+061 result=40 08:54:28 Get A/D value=-858993460 result=40 08:54:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:28 Parameters OK 08:54:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:28 Set A/D data flow result=40 08:54:28 Set A/D channel type result=40 08:54:28 Set A/D encoding result=40 08:54:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:28 Set channel filter=0.000000e+000 result=40 08:54:28 Config A/D Result=40 08:54:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:28 Get A/D filter: -9.255963e+061 result=40 08:54:28 Get A/D value=-858993460 result=40 08:54:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:28 Aux= 08:54:28 Message to Camera, serial 82572 queued 08:55:04 Received message from Master: op=PointingHead serial=82584 08:55:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:55:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:55:05 Point started: ret=0 08:55:05 point_skyscan result=0 08:55:05 Check angles 08:55:05 SkyScan query 08:55:06 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 08:55:06 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 08:55:06 Check angles 08:55:06 SkyScan query 08:55:07 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 08:55:07 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 08:55:07 Check angles 08:55:07 SkyScan query 08:55:07 SkyScan query done: ret=0 az=117.855<-7857 ze=6.495<-11567 Statuses=0009 0008 08:55:07 Msec=1500 True Az=117.855 Ze=6.495 Az status=0009 Ze status=0008 08:55:08 Check angles 08:55:08 SkyScan query 08:55:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:55:08 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:55:08 Message to Master queued w/err=0: serial=82584 error=0 08:55:13 Received message from Master: op=Filter serial=82585 08:55:13 Color wheel filter change from 0 to 0 08:55:13 FLIGetFilterPos err=0 currentPosition=0 08:55:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:13 Filter is already there-color wheel unchanged 08:55:13 Received message from Master: op=Shutter serial=82586 08:55:13 Shutter LASER close 08:55:13 Received message from Camera: op=State serial=82588 08:55:13 GetSingleValue result=40 Value=cccccccc 08:55:13 SkyScan query 08:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:55:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:14 Parameters OK 08:55:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:14 Set A/D data flow result=40 08:55:14 Set A/D channel type result=40 08:55:14 Set A/D encoding result=40 08:55:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:14 Set channel filter=0.000000e+000 result=40 08:55:14 Config A/D Result=40 08:55:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:14 Get A/D filter: -9.255963e+061 result=40 08:55:14 Get A/D value=-858993460 result=40 08:55:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:14 Parameters OK 08:55:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:14 Set A/D data flow result=40 08:55:14 Set A/D channel type result=40 08:55:14 Set A/D encoding result=40 08:55:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:14 Set channel filter=0.000000e+000 result=40 08:55:14 Config A/D Result=40 08:55:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:14 Get A/D filter: -9.255963e+061 result=40 08:55:14 Get A/D value=-858993460 result=40 08:55:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:14 Aux= 08:55:14 Message to Camera, serial 82588 queued 08:55:51 Received message from Master: op=PointingHead serial=82601 08:55:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:55:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:55:51 Point started: ret=0 08:55:51 point_skyscan result=0 08:55:52 Check angles 08:55:52 SkyScan query 08:55:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 08:55:52 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 08:55:53 Check angles 08:55:53 SkyScan query 08:55:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 08:55:53 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 08:55:53 Check angles 08:55:53 SkyScan query 08:55:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.52<-16368 Statuses=0008 0009 08:55:54 Msec=1500 True Az=112.995 Ze=-65.52 Az status=0008 Ze status=0009 08:55:54 Check angles 08:55:54 SkyScan query 08:55:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.49<-17766 Statuses=0008 0009 08:55:55 Msec=2250 True Az=112.995 Ze=-86.49 Az status=0008 Ze status=0009 08:55:55 Check angles 08:55:55 SkyScan query 08:55:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 08:55:55 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 08:55:56 Check angles 08:55:56 SkyScan query 08:55:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.76<-20584 Statuses=0008 0009 08:55:56 Msec=3750 True Az=112.995 Ze=-128.76 Az status=0008 Ze status=0009 08:55:56 Check angles 08:55:56 SkyScan query 08:55:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 08:55:57 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 08:55:57 Check angles 08:55:57 SkyScan query 08:55:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.67<-23378 Statuses=0008 0009 08:55:58 Msec=5250 True Az=112.995 Ze=-170.67 Az status=0008 Ze status=0009 08:55:58 Check angles 08:55:58 SkyScan query 08:55:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:55:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:55:58 Message to Master queued w/err=0: serial=82601 error=0 08:56:03 Received message from Master: op=Filter serial=82602 08:56:03 Color wheel filter change from 0 to 0 08:56:03 FLIGetFilterPos err=0 currentPosition=0 08:56:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:03 Filter is already there-color wheel unchanged 08:56:04 Received message from Master: op=Shutter serial=82603 08:56:04 Shutter LASER open 08:56:04 Received message from Camera: op=State serial=82605 08:56:04 GetSingleValue result=40 Value=cccccccc 08:56:04 SkyScan query 08:56:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:56:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:04 Parameters OK 08:56:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:04 Set A/D data flow result=40 08:56:04 Set A/D channel type result=40 08:56:04 Set A/D encoding result=40 08:56:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:04 Set channel filter=0.000000e+000 result=40 08:56:04 Config A/D Result=40 08:56:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:04 Get A/D filter: -9.255963e+061 result=40 08:56:04 Get A/D value=-858993460 result=40 08:56:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:04 Parameters OK 08:56:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:04 Set A/D data flow result=40 08:56:04 Set A/D channel type result=40 08:56:04 Set A/D encoding result=40 08:56:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:04 Set channel filter=0.000000e+000 result=40 08:56:04 Config A/D Result=40 08:56:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:04 Get A/D filter: -9.255963e+061 result=40 08:56:04 Get A/D value=-858993460 result=40 08:56:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:04 Aux= 08:56:04 Message to Camera, serial 82605 queued 08:56:13 Received message from Master: op=Shutter serial=82615 08:56:13 Shutter LASER close 08:56:13 Received message from Master: op=PointingHead serial=82619 08:56:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:56:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:56:14 Point started: ret=0 08:56:14 point_skyscan result=0 08:56:14 Check angles 08:56:14 SkyScan query 08:56:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 08:56:15 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 08:56:15 Check angles 08:56:15 SkyScan query 08:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 08:56:16 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 08:56:16 Check angles 08:56:16 SkyScan query 08:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 08:56:16 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 08:56:17 Check angles 08:56:17 SkyScan query 08:56:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 08:56:17 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 08:56:17 Check angles 08:56:17 SkyScan query 08:56:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 08:56:18 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 08:56:18 Check angles 08:56:18 SkyScan query 08:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 08:56:19 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 08:56:19 Check angles 08:56:19 SkyScan query 08:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 08:56:19 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 08:56:20 Check angles 08:56:20 SkyScan query 08:56:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 08:56:20 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 08:56:20 Check angles 08:56:20 SkyScan query 08:56:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:56:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:56:21 Message to Master queued w/err=0: serial=82619 error=0 08:56:26 Received message from Master: op=Filter serial=82620 08:56:26 Color wheel filter change from 0 to 0 08:56:26 FLIGetFilterPos err=0 currentPosition=0 08:56:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:26 Filter is already there-color wheel unchanged 08:56:26 Received message from Master: op=Shutter serial=82621 08:56:26 Shutter LASER close 08:56:26 Received message from Camera: op=State serial=82623 08:56:26 GetSingleValue result=40 Value=cccccccc 08:56:26 SkyScan query 08:56:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:56:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:27 Parameters OK 08:56:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:27 Set A/D data flow result=40 08:56:27 Set A/D channel type result=40 08:56:27 Set A/D encoding result=40 08:56:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:27 Set channel filter=0.000000e+000 result=40 08:56:27 Config A/D Result=40 08:56:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:27 Get A/D filter: -9.255963e+061 result=40 08:56:27 Get A/D value=-858993460 result=40 08:56:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:27 Parameters OK 08:56:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:27 Set A/D data flow result=40 08:56:27 Set A/D channel type result=40 08:56:27 Set A/D encoding result=40 08:56:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:27 Set channel filter=0.000000e+000 result=40 08:56:27 Config A/D Result=40 08:56:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:27 Get A/D filter: -9.255963e+061 result=40 08:56:27 Get A/D value=-858993460 result=40 08:56:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:27 Aux= 08:56:27 Message to Camera, serial 82623 queued 08:57:04 Received message from Master: op=PointingHead serial=82636 08:57:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:57:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:57:04 Point started: ret=0 08:57:04 point_skyscan result=0 08:57:05 Check angles 08:57:05 SkyScan query 08:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:57:05 Message to Master queued w/err=0: serial=82636 error=0 08:57:10 Received message from Master: op=Filter serial=82637 08:57:10 Color wheel filter change from 0 to 0 08:57:10 FLIGetFilterPos err=0 currentPosition=0 08:57:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:10 Filter is already there-color wheel unchanged 08:57:11 Received message from Master: op=Shutter serial=82638 08:57:11 Shutter LASER close 08:57:11 Received message from Camera: op=State serial=82640 08:57:11 GetSingleValue result=40 Value=cccccccc 08:57:11 SkyScan query 08:57:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:11 Parameters OK 08:57:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:11 Set A/D data flow result=40 08:57:11 Set A/D channel type result=40 08:57:11 Set A/D encoding result=40 08:57:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:11 Set channel filter=0.000000e+000 result=40 08:57:11 Config A/D Result=40 08:57:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:11 Get A/D filter: -9.255963e+061 result=40 08:57:11 Get A/D value=-858993460 result=40 08:57:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:11 Parameters OK 08:57:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:11 Set A/D data flow result=40 08:57:11 Set A/D channel type result=40 08:57:11 Set A/D encoding result=40 08:57:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:11 Set channel filter=0.000000e+000 result=40 08:57:11 Config A/D Result=40 08:57:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:11 Get A/D filter: -9.255963e+061 result=40 08:57:11 Get A/D value=-858993460 result=40 08:57:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:11 Aux= 08:57:11 Message to Camera, serial 82640 queued 08:57:48 Received message from Master: op=PointingHead serial=82653 08:57:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:57:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:57:48 Point started: ret=0 08:57:48 point_skyscan result=0 08:57:49 Check angles 08:57:49 SkyScan query 08:57:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:57:50 Message to Master queued w/err=0: serial=82653 error=0 08:57:55 Received message from Master: op=Filter serial=82654 08:57:55 Color wheel filter change from 0 to 0 08:57:55 FLIGetFilterPos err=0 currentPosition=0 08:57:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:55 Filter is already there-color wheel unchanged 08:57:55 Received message from Master: op=Shutter serial=82655 08:57:55 Shutter LASER close 08:57:55 Received message from Camera: op=State serial=82657 08:57:55 GetSingleValue result=40 Value=cccccccc 08:57:55 SkyScan query 08:57:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:55 Parameters OK 08:57:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:55 Set A/D data flow result=40 08:57:55 Set A/D channel type result=40 08:57:55 Set A/D encoding result=40 08:57:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:55 Set channel filter=0.000000e+000 result=40 08:57:55 Config A/D Result=40 08:57:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:55 Get A/D filter: -9.255963e+061 result=40 08:57:55 Get A/D value=-858993460 result=40 08:57:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:55 Parameters OK 08:57:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:55 Set A/D data flow result=40 08:57:55 Set A/D channel type result=40 08:57:55 Set A/D encoding result=40 08:57:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:55 Set channel filter=0.000000e+000 result=40 08:57:55 Config A/D Result=40 08:57:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:55 Get A/D filter: -9.255963e+061 result=40 08:57:55 Get A/D value=-858993460 result=40 08:57:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:55 Aux= 08:57:55 Message to Camera, serial 82657 queued 08:58:32 Received message from Master: op=PointingHead serial=82670 08:58:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:58:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:58:33 Point started: ret=0 08:58:33 point_skyscan result=0 08:58:33 Check angles 08:58:33 SkyScan query 08:58:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:58:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:58:34 Message to Master queued w/err=0: serial=82670 error=0 08:58:39 Received message from Master: op=Filter serial=82671 08:58:39 Color wheel filter change from 0 to 0 08:58:39 FLIGetFilterPos err=0 currentPosition=0 08:58:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:39 Filter is already there-color wheel unchanged 08:58:39 Received message from Master: op=Shutter serial=82672 08:58:39 Shutter LASER close 08:58:39 Received message from Camera: op=State serial=82674 08:58:39 GetSingleValue result=40 Value=cccccccc 08:58:39 SkyScan query 08:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:58:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:40 Parameters OK 08:58:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:40 Set A/D data flow result=40 08:58:40 Set A/D channel type result=40 08:58:40 Set A/D encoding result=40 08:58:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:40 Set channel filter=0.000000e+000 result=40 08:58:40 Config A/D Result=40 08:58:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:40 Get A/D filter: -9.255963e+061 result=40 08:58:40 Get A/D value=-858993460 result=40 08:58:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:40 Parameters OK 08:58:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:40 Set A/D data flow result=40 08:58:40 Set A/D channel type result=40 08:58:40 Set A/D encoding result=40 08:58:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:40 Set channel filter=0.000000e+000 result=40 08:58:40 Config A/D Result=40 08:58:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:40 Get A/D filter: -9.255963e+061 result=40 08:58:40 Get A/D value=-858993460 result=40 08:58:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:40 Aux= 08:58:40 Message to Camera, serial 82674 queued 08:59:17 Received message from Master: op=PointingHead serial=82687 08:59:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:59:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:59:17 Point started: ret=0 08:59:17 point_skyscan result=0 08:59:18 Check angles 08:59:18 SkyScan query 08:59:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 08:59:18 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 08:59:18 Check angles 08:59:18 SkyScan query 08:59:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 08:59:19 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 08:59:19 Check angles 08:59:19 SkyScan query 08:59:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 08:59:20 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 08:59:20 Check angles 08:59:20 SkyScan query 08:59:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 08:59:21 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 08:59:21 Check angles 08:59:21 SkyScan query 08:59:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.165<-19211 Statuses=0008 0009 08:59:21 Msec=3000 True Az=112.995 Ze=-108.165 Az status=0008 Ze status=0009 08:59:21 Check angles 08:59:21 SkyScan query 08:59:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.12<-20608 Statuses=0008 0009 08:59:22 Msec=3750 True Az=112.995 Ze=-129.12 Az status=0008 Ze status=0009 08:59:22 Check angles 08:59:22 SkyScan query 08:59:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.075<-22005 Statuses=0008 0009 08:59:23 Msec=4500 True Az=112.995 Ze=-150.075 Az status=0008 Ze status=0009 08:59:23 Check angles 08:59:23 SkyScan query 08:59:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0008 0009 08:59:24 Msec=5250 True Az=112.995 Ze=-170.925 Az status=0008 Ze status=0009 08:59:24 Check angles 08:59:24 SkyScan query 08:59:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:59:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:59:24 Message to Master queued w/err=0: serial=82687 error=0 08:59:29 Received message from Master: op=Filter serial=82688 08:59:29 Color wheel filter change from 0 to 0 08:59:29 FLIGetFilterPos err=0 currentPosition=0 08:59:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:29 Filter is already there-color wheel unchanged 08:59:30 Received message from Master: op=Shutter serial=82689 08:59:30 Shutter LASER open 08:59:30 Received message from Camera: op=State serial=82691 08:59:30 GetSingleValue result=40 Value=cccccccc 08:59:30 SkyScan query 08:59:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:59:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:30 Parameters OK 08:59:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:30 Set A/D data flow result=40 08:59:30 Set A/D channel type result=40 08:59:30 Set A/D encoding result=40 08:59:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:30 Set channel filter=0.000000e+000 result=40 08:59:30 Config A/D Result=40 08:59:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:30 Get A/D filter: -9.255963e+061 result=40 08:59:30 Get A/D value=-858993460 result=40 08:59:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:30 Parameters OK 08:59:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:30 Set A/D data flow result=40 08:59:30 Set A/D channel type result=40 08:59:30 Set A/D encoding result=40 08:59:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:30 Set channel filter=0.000000e+000 result=40 08:59:30 Config A/D Result=40 08:59:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:30 Get A/D filter: -9.255963e+061 result=40 08:59:30 Get A/D value=-858993460 result=40 08:59:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:30 Aux= 08:59:30 Message to Camera, serial 82691 queued 08:59:39 Received message from Master: op=Shutter serial=82701 08:59:39 Shutter LASER close 08:59:39 Received message from Master: op=PointingHead serial=82705 08:59:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:59:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:59:40 Point started: ret=0 08:59:40 point_skyscan result=0 08:59:40 Check angles 08:59:40 SkyScan query 08:59:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 08:59:41 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 08:59:41 Check angles 08:59:41 SkyScan query 08:59:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.71<-20114 Statuses=0008 0009 08:59:42 Msec=750 True Az=112.995 Ze=-121.71 Az status=0008 Ze status=0009 08:59:42 Check angles 08:59:42 SkyScan query 08:59:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.35<-18690 Statuses=0008 0009 08:59:43 Msec=1500 True Az=112.995 Ze=-100.35 Az status=0008 Ze status=0009 08:59:43 Check angles 08:59:43 SkyScan query 08:59:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 08:59:43 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 08:59:43 Check angles 08:59:43 SkyScan query 08:59:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.41<-15894 Statuses=0008 0009 08:59:44 Msec=3000 True Az=112.995 Ze=-58.41 Az status=0008 Ze status=0009 08:59:44 Check angles 08:59:44 SkyScan query 08:59:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.485<-14499 Statuses=0008 0009 08:59:45 Msec=3750 True Az=112.995 Ze=-37.485 Az status=0008 Ze status=0009 08:59:45 Check angles 08:59:45 SkyScan query 08:59:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.515<-13101 Statuses=0008 0009 08:59:46 Msec=4500 True Az=112.995 Ze=-16.515 Az status=0008 Ze status=0009 08:59:46 Check angles 08:59:46 SkyScan query 08:59:46 SkyScan query done: ret=0 az=112.995<-7533 ze=4.71<-11686 Statuses=0008 0009 08:59:46 Msec=5250 True Az=112.995 Ze=4.71 Az status=0008 Ze status=0009 08:59:46 Check angles 08:59:46 SkyScan query 08:59:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:59:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:59:47 Message to Master queued w/err=0: serial=82705 error=0 08:59:52 Received message from Master: op=Filter serial=82706 08:59:52 Color wheel filter change from 0 to 0 08:59:52 FLIGetFilterPos err=0 currentPosition=0 08:59:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:52 Filter is already there-color wheel unchanged 08:59:52 Received message from Master: op=Shutter serial=82707 08:59:52 Shutter LASER close 08:59:52 Received message from Camera: op=State serial=82709 08:59:52 GetSingleValue result=40 Value=cccccccc 08:59:52 SkyScan query 08:59:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:59:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:53 Parameters OK 08:59:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:53 Set A/D data flow result=40 08:59:53 Set A/D channel type result=40 08:59:53 Set A/D encoding result=40 08:59:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:53 Set channel filter=0.000000e+000 result=40 08:59:53 Config A/D Result=40 08:59:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:53 Get A/D filter: -9.255963e+061 result=40 08:59:53 Get A/D value=-858993460 result=40 08:59:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:53 Parameters OK 08:59:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:53 Set A/D data flow result=40 08:59:53 Set A/D channel type result=40 08:59:53 Set A/D encoding result=40 08:59:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:53 Set channel filter=0.000000e+000 result=40 08:59:53 Config A/D Result=40 08:59:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:53 Get A/D filter: -9.255963e+061 result=40 08:59:53 Get A/D value=-858993460 result=40 08:59:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:53 Aux= 08:59:53 Message to Camera, serial 82709 queued 09:00:30 Received message from Master: op=PointingHead serial=82722 09:00:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:00:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:00:30 Point started: ret=0 09:00:30 point_skyscan result=0 09:00:31 Check angles 09:00:31 SkyScan query 09:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:00:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:00:31 Message to Master queued w/err=0: serial=82722 error=0 09:00:36 Received message from Master: op=Filter serial=82723 09:00:36 Color wheel filter change from 0 to 0 09:00:36 FLIGetFilterPos err=0 currentPosition=0 09:00:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:36 Filter is already there-color wheel unchanged 09:00:37 Received message from Master: op=Shutter serial=82724 09:00:37 Shutter LASER close 09:00:37 Received message from Camera: op=State serial=82726 09:00:37 GetSingleValue result=40 Value=cccccccc 09:00:37 SkyScan query 09:00:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:00:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:37 Parameters OK 09:00:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:37 Set A/D data flow result=40 09:00:37 Set A/D channel type result=40 09:00:37 Set A/D encoding result=40 09:00:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:37 Set channel filter=0.000000e+000 result=40 09:00:37 Config A/D Result=40 09:00:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:37 Get A/D filter: -9.255963e+061 result=40 09:00:37 Get A/D value=-858993460 result=40 09:00:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:37 Parameters OK 09:00:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:37 Set A/D data flow result=40 09:00:37 Set A/D channel type result=40 09:00:37 Set A/D encoding result=40 09:00:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:37 Set channel filter=0.000000e+000 result=40 09:00:37 Config A/D Result=40 09:00:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:37 Get A/D filter: -9.255963e+061 result=40 09:00:37 Get A/D value=-858993460 result=40 09:00:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:37 Aux= 09:00:37 Message to Camera, serial 82726 queued 09:01:14 Received message from Master: op=PointingHead serial=82739 09:01:14 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:01:14 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:01:14 Point started: ret=0 09:01:14 point_skyscan result=0 09:01:15 Check angles 09:01:15 SkyScan query 09:01:16 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 09:01:16 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 09:01:16 Check angles 09:01:16 SkyScan query 09:01:17 SkyScan query done: ret=0 az=153.36<-10224 ze=-6.495<-12433 Statuses=0009 0008 09:01:17 Msec=750 True Az=153.36 Ze=-6.495 Az status=0009 Ze status=0008 09:01:17 Check angles 09:01:17 SkyScan query 09:01:17 SkyScan query done: ret=0 az=170.91<-11394 ze=-6.495<-12433 Statuses=0009 0008 09:01:17 Msec=1500 True Az=170.91 Ze=-6.495 Az status=0009 Ze status=0008 09:01:17 Check angles 09:01:17 SkyScan query 09:01:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:01:18 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:01:18 Message to Master queued w/err=0: serial=82739 error=0 09:01:23 Received message from Master: op=Filter serial=82740 09:01:23 Color wheel filter change from 0 to 0 09:01:23 FLIGetFilterPos err=0 currentPosition=0 09:01:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:23 Filter is already there-color wheel unchanged 09:01:23 Received message from Master: op=Shutter serial=82741 09:01:23 Shutter LASER close 09:01:23 Received message from Camera: op=State serial=82743 09:01:23 GetSingleValue result=40 Value=cccccccc 09:01:23 SkyScan query 09:01:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:01:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:24 Parameters OK 09:01:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:24 Set A/D data flow result=40 09:01:24 Set A/D channel type result=40 09:01:24 Set A/D encoding result=40 09:01:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:24 Set channel filter=0.000000e+000 result=40 09:01:24 Config A/D Result=40 09:01:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:24 Get A/D filter: -9.255963e+061 result=40 09:01:24 Get A/D value=-858993460 result=40 09:01:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:24 Parameters OK 09:01:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:24 Set A/D data flow result=40 09:01:24 Set A/D channel type result=40 09:01:24 Set A/D encoding result=40 09:01:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:24 Set channel filter=0.000000e+000 result=40 09:01:24 Config A/D Result=40 09:01:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:24 Get A/D filter: -9.255963e+061 result=40 09:01:24 Get A/D value=-858993460 result=40 09:01:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:01:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:01:24 Aux= 09:01:24 Message to Camera, serial 82743 queued 09:02:01 Received message from Master: op=PointingHead serial=82756 09:02:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:02:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:02:01 Point started: ret=0 09:02:01 point_skyscan result=0 09:02:02 Check angles 09:02:02 SkyScan query 09:02:02 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 09:02:02 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 09:02:02 Check angles 09:02:02 SkyScan query 09:02:03 SkyScan query done: ret=0 az=135.39<-9026 ze=6.495<-11567 Statuses=0009 0008 09:02:03 Msec=750 True Az=135.39 Ze=6.495 Az status=0009 Ze status=0008 09:02:03 Check angles 09:02:03 SkyScan query 09:02:04 SkyScan query done: ret=0 az=117.915<-7861 ze=6.495<-11567 Statuses=0009 0008 09:02:04 Msec=1500 True Az=117.915 Ze=6.495 Az status=0009 Ze status=0008 09:02:04 Check angles 09:02:04 SkyScan query 09:02:05 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 09:02:05 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 09:02:05 Message to Master queued w/err=0: serial=82756 error=0 09:02:10 Received message from Master: op=Filter serial=82757 09:02:10 Color wheel filter change from 0 to 0 09:02:10 FLIGetFilterPos err=0 currentPosition=0 09:02:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:10 Filter is already there-color wheel unchanged 09:02:10 Received message from Master: op=Shutter serial=82758 09:02:10 Shutter LASER close 09:02:10 Received message from Camera: op=State serial=82760 09:02:10 GetSingleValue result=40 Value=cccccccc 09:02:10 SkyScan query 09:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:02:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:10 Parameters OK 09:02:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:10 Set A/D data flow result=40 09:02:10 Set A/D channel type result=40 09:02:10 Set A/D encoding result=40 09:02:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:10 Set channel filter=0.000000e+000 result=40 09:02:10 Config A/D Result=40 09:02:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:10 Get A/D filter: -9.255963e+061 result=40 09:02:10 Get A/D value=-858993460 result=40 09:02:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:10 Parameters OK 09:02:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:10 Set A/D data flow result=40 09:02:10 Set A/D channel type result=40 09:02:10 Set A/D encoding result=40 09:02:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:10 Set channel filter=0.000000e+000 result=40 09:02:10 Config A/D Result=40 09:02:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:10 Get A/D filter: -9.255963e+061 result=40 09:02:10 Get A/D value=-858993460 result=40 09:02:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:10 Aux= 09:02:10 Message to Camera, serial 82760 queued 09:02:47 Received message from Master: op=PointingHead serial=82773 09:02:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:02:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:02:48 Point started: ret=0 09:02:48 point_skyscan result=0 09:02:48 Check angles 09:02:48 SkyScan query 09:02:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 09:02:49 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 09:02:49 Check angles 09:02:49 SkyScan query 09:02:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 09:02:50 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 09:02:50 Check angles 09:02:50 SkyScan query 09:02:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.105<-16407 Statuses=0008 0009 09:02:50 Msec=1500 True Az=112.995 Ze=-66.105 Az status=0008 Ze status=0009 09:02:51 Check angles 09:02:51 SkyScan query 09:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 09:02:51 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 09:02:51 Check angles 09:02:51 SkyScan query 09:02:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-108<-19200 Statuses=0008 0009 09:02:52 Msec=3000 True Az=112.995 Ze=-108 Az status=0008 Ze status=0009 09:02:52 Check angles 09:02:52 SkyScan query 09:02:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.39<-20626 Statuses=0008 0009 09:02:53 Msec=3750 True Az=112.995 Ze=-129.39 Az status=0008 Ze status=0009 09:02:53 Check angles 09:02:53 SkyScan query 09:02:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 09:02:53 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 09:02:54 Check angles 09:02:54 SkyScan query 09:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 09:02:54 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 09:02:54 Check angles 09:02:54 SkyScan query 09:02:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:02:55 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:02:55 Message to Master queued w/err=0: serial=82773 error=0 09:03:00 Received message from Master: op=Filter serial=82774 09:03:00 Color wheel filter change from 0 to 0 09:03:00 FLIGetFilterPos err=0 currentPosition=0 09:03:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:00 Filter is already there-color wheel unchanged 09:03:00 Received message from Master: op=Shutter serial=82775 09:03:00 Shutter LASER open 09:03:00 Received message from Camera: op=State serial=82777 09:03:00 GetSingleValue result=40 Value=cccccccc 09:03:00 SkyScan query 09:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:03:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:01 Parameters OK 09:03:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:01 Set A/D data flow result=40 09:03:01 Set A/D channel type result=40 09:03:01 Set A/D encoding result=40 09:03:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:01 Set channel filter=0.000000e+000 result=40 09:03:01 Config A/D Result=40 09:03:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:01 Get A/D filter: -9.255963e+061 result=40 09:03:01 Get A/D value=-858993460 result=40 09:03:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:01 Parameters OK 09:03:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:01 Set A/D data flow result=40 09:03:01 Set A/D channel type result=40 09:03:01 Set A/D encoding result=40 09:03:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:01 Set channel filter=0.000000e+000 result=40 09:03:01 Config A/D Result=40 09:03:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:01 Get A/D filter: -9.255963e+061 result=40 09:03:01 Get A/D value=-858993460 result=40 09:03:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:01 Aux= 09:03:01 Message to Camera, serial 82777 queued 09:03:09 Received message from Master: op=Shutter serial=82787 09:03:09 Shutter LASER close 09:03:10 Received message from Master: op=PointingHead serial=82791 09:03:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:03:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:03:10 Point started: ret=0 09:03:10 point_skyscan result=0 09:03:11 Check angles 09:03:11 SkyScan query 09:03:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 09:03:11 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 09:03:12 Check angles 09:03:12 SkyScan query 09:03:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 09:03:12 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 09:03:12 Check angles 09:03:12 SkyScan query 09:03:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.485<-18699 Statuses=0008 0009 09:03:13 Msec=1500 True Az=112.995 Ze=-100.485 Az status=0008 Ze status=0009 09:03:13 Check angles 09:03:13 SkyScan query 09:03:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.065<-17271 Statuses=0008 0009 09:03:14 Msec=2250 True Az=112.995 Ze=-79.065 Az status=0008 Ze status=0009 09:03:14 Check angles 09:03:14 SkyScan query 09:03:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.69<-15846 Statuses=0008 0009 09:03:14 Msec=3000 True Az=112.995 Ze=-57.69 Az status=0008 Ze status=0009 09:03:15 Check angles 09:03:15 SkyScan query 09:03:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.735<-14449 Statuses=0008 0009 09:03:15 Msec=3750 True Az=112.995 Ze=-36.735 Az status=0008 Ze status=0009 09:03:15 Check angles 09:03:15 SkyScan query 09:03:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.345<-13023 Statuses=0008 0009 09:03:16 Msec=4500 True Az=112.995 Ze=-15.345 Az status=0008 Ze status=0009 09:03:16 Check angles 09:03:16 SkyScan query 09:03:17 SkyScan query done: ret=0 az=112.995<-7533 ze=5.49<-11634 Statuses=0008 0009 09:03:17 Msec=5250 True Az=112.995 Ze=5.49 Az status=0008 Ze status=0009 09:03:17 Check angles 09:03:17 SkyScan query 09:03:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:03:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:03:17 Message to Master queued w/err=0: serial=82791 error=0 09:03:22 Received message from Master: op=Filter serial=82792 09:03:22 Color wheel filter change from 0 to 0 09:03:22 FLIGetFilterPos err=0 currentPosition=0 09:03:22 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:22 Filter is already there-color wheel unchanged 09:03:23 Received message from Master: op=Shutter serial=82793 09:03:23 Shutter LASER close 09:03:23 Received message from Camera: op=State serial=82795 09:03:23 GetSingleValue result=40 Value=cccccccc 09:03:23 SkyScan query 09:03:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:03:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:23 Parameters OK 09:03:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:23 Set A/D data flow result=40 09:03:23 Set A/D channel type result=40 09:03:23 Set A/D encoding result=40 09:03:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:23 Set channel filter=0.000000e+000 result=40 09:03:23 Config A/D Result=40 09:03:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:23 Get A/D filter: -9.255963e+061 result=40 09:03:23 Get A/D value=-858993460 result=40 09:03:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:23 Parameters OK 09:03:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:23 Set A/D data flow result=40 09:03:23 Set A/D channel type result=40 09:03:23 Set A/D encoding result=40 09:03:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:23 Set channel filter=0.000000e+000 result=40 09:03:23 Config A/D Result=40 09:03:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:23 Get A/D filter: -9.255963e+061 result=40 09:03:23 Get A/D value=-858993460 result=40 09:03:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:23 Aux= 09:03:23 Message to Camera, serial 82795 queued 09:03:38 Received message from Master: op=Identify serial=82796 [UTC 2019-3-3 09:03:50] 09:04:00 Received message from Master: op=PointingHead serial=82811 09:04:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:04:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:04:01 Point started: ret=0 09:04:01 point_skyscan result=0 09:04:01 Check angles 09:04:01 SkyScan query 09:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:04:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:04:02 Message to Master queued w/err=0: serial=82811 error=0 09:04:07 Received message from Master: op=Filter serial=82812 09:04:07 Color wheel filter change from 0 to 0 09:04:07 FLIGetFilterPos err=0 currentPosition=0 09:04:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:07 Filter is already there-color wheel unchanged 09:04:07 Received message from Master: op=Shutter serial=82813 09:04:07 Shutter LASER close 09:04:07 Received message from Camera: op=State serial=82815 09:04:07 GetSingleValue result=40 Value=cccccccc 09:04:07 SkyScan query 09:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:04:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:08 Parameters OK 09:04:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:08 Set A/D data flow result=40 09:04:08 Set A/D channel type result=40 09:04:08 Set A/D encoding result=40 09:04:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:08 Set channel filter=0.000000e+000 result=40 09:04:08 Config A/D Result=40 09:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:08 Get A/D filter: -9.255963e+061 result=40 09:04:08 Get A/D value=-858993460 result=40 09:04:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:08 Parameters OK 09:04:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:08 Set A/D data flow result=40 09:04:08 Set A/D channel type result=40 09:04:08 Set A/D encoding result=40 09:04:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:08 Set channel filter=0.000000e+000 result=40 09:04:08 Config A/D Result=40 09:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:08 Get A/D filter: -9.255963e+061 result=40 09:04:08 Get A/D value=-858993460 result=40 09:04:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:08 Aux= 09:04:08 Message to Camera, serial 82815 queued 09:04:44 Received message from Master: op=PointingHead serial=82827 09:04:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:04:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:04:44 Point started: ret=0 09:04:44 point_skyscan result=0 09:04:45 Check angles 09:04:45 SkyScan query 09:04:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:04:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:04:45 Message to Master queued w/err=0: serial=82827 error=0 09:04:50 Received message from Master: op=Filter serial=82828 09:04:50 Color wheel filter change from 0 to 0 09:04:50 FLIGetFilterPos err=0 currentPosition=0 09:04:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:50 Filter is already there-color wheel unchanged 09:04:50 Received message from Master: op=Shutter serial=82829 09:04:50 Shutter LASER close 09:04:50 Received message from Camera: op=State serial=82831 09:04:50 GetSingleValue result=40 Value=cccccccc 09:04:50 SkyScan query 09:04:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:04:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:51 Parameters OK 09:04:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:51 Set A/D data flow result=40 09:04:51 Set A/D channel type result=40 09:04:51 Set A/D encoding result=40 09:04:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:51 Set channel filter=0.000000e+000 result=40 09:04:51 Config A/D Result=40 09:04:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:51 Get A/D filter: -9.255963e+061 result=40 09:04:51 Get A/D value=-858993460 result=40 09:04:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:51 Parameters OK 09:04:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:51 Set A/D data flow result=40 09:04:51 Set A/D channel type result=40 09:04:51 Set A/D encoding result=40 09:04:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:51 Set channel filter=0.000000e+000 result=40 09:04:51 Config A/D Result=40 09:04:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:51 Get A/D filter: -9.255963e+061 result=40 09:04:51 Get A/D value=-858993460 result=40 09:04:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:51 Aux= 09:04:51 Message to Camera, serial 82831 queued 09:05:28 Received message from Master: op=PointingHead serial=82844 09:05:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:05:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:05:28 Point started: ret=0 09:05:28 point_skyscan result=0 09:05:29 Check angles 09:05:29 SkyScan query 09:05:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:05:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:05:30 Message to Master queued w/err=0: serial=82844 error=0 09:05:35 Received message from Master: op=Filter serial=82845 09:05:35 Color wheel filter change from 0 to 0 09:05:35 FLIGetFilterPos err=0 currentPosition=0 09:05:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:35 Filter is already there-color wheel unchanged 09:05:35 Received message from Master: op=Shutter serial=82846 09:05:35 Shutter LASER close 09:05:35 Received message from Camera: op=State serial=82848 09:05:35 GetSingleValue result=40 Value=cccccccc 09:05:35 SkyScan query 09:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:05:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:35 Parameters OK 09:05:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:35 Set A/D data flow result=40 09:05:35 Set A/D channel type result=40 09:05:35 Set A/D encoding result=40 09:05:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:35 Set channel filter=0.000000e+000 result=40 09:05:35 Config A/D Result=40 09:05:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:35 Get A/D filter: -9.255963e+061 result=40 09:05:35 Get A/D value=-858993460 result=40 09:05:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:35 Parameters OK 09:05:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:35 Set A/D data flow result=40 09:05:35 Set A/D channel type result=40 09:05:35 Set A/D encoding result=40 09:05:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:35 Set channel filter=0.000000e+000 result=40 09:05:35 Config A/D Result=40 09:05:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:35 Get A/D filter: -9.255963e+061 result=40 09:05:35 Get A/D value=-858993460 result=40 09:05:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:35 Aux= 09:05:35 Message to Camera, serial 82848 queued 09:06:12 Received message from Master: op=PointingHead serial=82861 09:06:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:06:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:06:13 Point started: ret=0 09:06:13 point_skyscan result=0 09:06:13 Check angles 09:06:13 SkyScan query 09:06:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 09:06:14 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 09:06:14 Check angles 09:06:14 SkyScan query 09:06:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 09:06:15 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 09:06:15 Check angles 09:06:15 SkyScan query 09:06:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 09:06:15 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 09:06:16 Check angles 09:06:16 SkyScan query 09:06:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 09:06:16 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 09:06:16 Check angles 09:06:16 SkyScan query 09:06:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 09:06:17 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 09:06:17 Check angles 09:06:17 SkyScan query 09:06:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 09:06:18 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 09:06:18 Check angles 09:06:18 SkyScan query 09:06:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 09:06:18 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 09:06:19 Check angles 09:06:19 SkyScan query 09:06:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.52<-23368 Statuses=0008 0009 09:06:19 Msec=5250 True Az=112.995 Ze=-170.52 Az status=0008 Ze status=0009 09:06:19 Check angles 09:06:19 SkyScan query 09:06:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:06:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:06:20 Message to Master queued w/err=0: serial=82861 error=0 09:06:25 Received message from Master: op=Filter serial=82862 09:06:25 Color wheel filter change from 0 to 0 09:06:25 FLIGetFilterPos err=0 currentPosition=0 09:06:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:25 Filter is already there-color wheel unchanged 09:06:25 Received message from Master: op=Shutter serial=82863 09:06:25 Shutter LASER open 09:06:25 Received message from Camera: op=State serial=82865 09:06:25 GetSingleValue result=40 Value=cccccccc 09:06:25 SkyScan query 09:06:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:06:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:26 Parameters OK 09:06:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:26 Set A/D data flow result=40 09:06:26 Set A/D channel type result=40 09:06:26 Set A/D encoding result=40 09:06:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:26 Set channel filter=0.000000e+000 result=40 09:06:26 Config A/D Result=40 09:06:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:26 Get A/D filter: -9.255963e+061 result=40 09:06:26 Get A/D value=-858993460 result=40 09:06:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:26 Parameters OK 09:06:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:26 Set A/D data flow result=40 09:06:26 Set A/D channel type result=40 09:06:26 Set A/D encoding result=40 09:06:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:26 Set channel filter=0.000000e+000 result=40 09:06:26 Config A/D Result=40 09:06:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:26 Get A/D filter: -9.255963e+061 result=40 09:06:26 Get A/D value=-858993460 result=40 09:06:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:26 Aux= 09:06:26 Message to Camera, serial 82865 queued 09:06:34 Received message from Master: op=Shutter serial=82875 09:06:34 Shutter LASER close 09:06:35 Received message from Master: op=PointingHead serial=82879 09:06:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:06:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:06:35 Point started: ret=0 09:06:35 point_skyscan result=0 09:06:36 Check angles 09:06:36 SkyScan query 09:06:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 09:06:37 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 09:06:37 Check angles 09:06:37 SkyScan query 09:06:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 09:06:37 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 09:06:37 Check angles 09:06:37 SkyScan query 09:06:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.385<-18759 Statuses=0008 0009 09:06:38 Msec=1500 True Az=112.995 Ze=-101.385 Az status=0008 Ze status=0009 09:06:38 Check angles 09:06:38 SkyScan query 09:06:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.43<-17362 Statuses=0008 0009 09:06:39 Msec=2250 True Az=112.995 Ze=-80.43 Az status=0008 Ze status=0009 09:06:39 Check angles 09:06:39 SkyScan query 09:06:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.49<-15966 Statuses=0008 0009 09:06:40 Msec=3000 True Az=112.995 Ze=-59.49 Az status=0008 Ze status=0009 09:06:40 Check angles 09:06:40 SkyScan query 09:06:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.535<-14569 Statuses=0008 0009 09:06:40 Msec=3750 True Az=112.995 Ze=-38.535 Az status=0008 Ze status=0009 09:06:40 Check angles 09:06:40 SkyScan query 09:06:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.565<-13171 Statuses=0008 0009 09:06:41 Msec=4500 True Az=112.995 Ze=-17.565 Az status=0008 Ze status=0009 09:06:41 Check angles 09:06:41 SkyScan query 09:06:42 SkyScan query done: ret=0 az=112.995<-7533 ze=3.39<-11774 Statuses=0008 0009 09:06:42 Msec=5250 True Az=112.995 Ze=3.39 Az status=0008 Ze status=0009 09:06:42 Check angles 09:06:42 SkyScan query 09:06:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:06:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:06:43 Message to Master queued w/err=0: serial=82879 error=0 09:06:48 Received message from Master: op=Filter serial=82880 09:06:48 Color wheel filter change from 0 to 0 09:06:48 FLIGetFilterPos err=0 currentPosition=0 09:06:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:48 Filter is already there-color wheel unchanged 09:06:48 Received message from Master: op=Shutter serial=82881 09:06:48 Shutter LASER close 09:06:48 Received message from Camera: op=State serial=82883 09:06:48 GetSingleValue result=40 Value=cccccccc 09:06:48 SkyScan query 09:06:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:06:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:48 Parameters OK 09:06:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:48 Set A/D data flow result=40 09:06:48 Set A/D channel type result=40 09:06:48 Set A/D encoding result=40 09:06:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:48 Set channel filter=0.000000e+000 result=40 09:06:48 Config A/D Result=40 09:06:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:48 Get A/D filter: -9.255963e+061 result=40 09:06:48 Get A/D value=-858993460 result=40 09:06:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:48 Parameters OK 09:06:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:48 Set A/D data flow result=40 09:06:48 Set A/D channel type result=40 09:06:48 Set A/D encoding result=40 09:06:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:48 Set channel filter=0.000000e+000 result=40 09:06:48 Config A/D Result=40 09:06:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:48 Get A/D filter: -9.255963e+061 result=40 09:06:48 Get A/D value=-858993460 result=40 09:06:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:48 Aux= 09:06:48 Message to Camera, serial 82883 queued 09:07:25 Received message from Master: op=PointingHead serial=82896 09:07:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:07:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:07:26 Point started: ret=0 09:07:26 point_skyscan result=0 09:07:26 Check angles 09:07:26 SkyScan query 09:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:07:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:07:27 Message to Master queued w/err=0: serial=82896 error=0 09:07:32 Received message from Master: op=Filter serial=82897 09:07:32 Color wheel filter change from 0 to 0 09:07:32 FLIGetFilterPos err=0 currentPosition=0 09:07:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:32 Filter is already there-color wheel unchanged 09:07:32 Received message from Master: op=Shutter serial=82898 09:07:32 Shutter LASER close 09:07:32 Received message from Camera: op=State serial=82900 09:07:32 GetSingleValue result=40 Value=cccccccc 09:07:32 SkyScan query 09:07:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:07:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:33 Parameters OK 09:07:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:33 Set A/D data flow result=40 09:07:33 Set A/D channel type result=40 09:07:33 Set A/D encoding result=40 09:07:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:33 Set channel filter=0.000000e+000 result=40 09:07:33 Config A/D Result=40 09:07:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:33 Get A/D filter: -9.255963e+061 result=40 09:07:33 Get A/D value=-858993460 result=40 09:07:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:33 Parameters OK 09:07:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:33 Set A/D data flow result=40 09:07:33 Set A/D channel type result=40 09:07:33 Set A/D encoding result=40 09:07:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:33 Set channel filter=0.000000e+000 result=40 09:07:33 Config A/D Result=40 09:07:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:33 Get A/D filter: -9.255963e+061 result=40 09:07:33 Get A/D value=-858993460 result=40 09:07:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:33 Aux= 09:07:33 Message to Camera, serial 82900 queued 09:08:10 Received message from Master: op=PointingHead serial=82913 09:08:10 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:08:10 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:08:10 Point started: ret=0 09:08:10 point_skyscan result=0 09:08:11 Check angles 09:08:11 SkyScan query 09:08:11 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 09:08:11 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 09:08:11 Check angles 09:08:11 SkyScan query 09:08:12 SkyScan query done: ret=0 az=153.615<-10241 ze=-6.495<-12433 Statuses=0009 0008 09:08:12 Msec=750 True Az=153.615 Ze=-6.495 Az status=0009 Ze status=0008 09:08:12 Check angles 09:08:12 SkyScan query 09:08:13 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 09:08:13 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 09:08:13 Check angles 09:08:13 SkyScan query 09:08:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:08:13 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:08:13 Message to Master queued w/err=0: serial=82913 error=0 09:08:18 Received message from Master: op=Filter serial=82914 09:08:18 Color wheel filter change from 0 to 0 09:08:18 FLIGetFilterPos err=0 currentPosition=0 09:08:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:18 Filter is already there-color wheel unchanged 09:08:19 Received message from Master: op=Shutter serial=82915 09:08:19 Shutter LASER close 09:08:19 Received message from Camera: op=State serial=82917 09:08:19 GetSingleValue result=40 Value=cccccccc 09:08:19 SkyScan query 09:08:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:08:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:19 Parameters OK 09:08:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:19 Set A/D data flow result=40 09:08:19 Set A/D channel type result=40 09:08:19 Set A/D encoding result=40 09:08:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:19 Set channel filter=0.000000e+000 result=40 09:08:19 Config A/D Result=40 09:08:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:19 Get A/D filter: -9.255963e+061 result=40 09:08:19 Get A/D value=-858993460 result=40 09:08:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:19 Parameters OK 09:08:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:19 Set A/D data flow result=40 09:08:19 Set A/D channel type result=40 09:08:19 Set A/D encoding result=40 09:08:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:19 Set channel filter=0.000000e+000 result=40 09:08:19 Config A/D Result=40 09:08:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:19 Get A/D filter: -9.255963e+061 result=40 09:08:19 Get A/D value=-858993460 result=40 09:08:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:19 Aux= 09:08:19 Message to Camera, serial 82917 queued 09:08:55 Received message from Master: op=PointingHead serial=82929 09:08:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:08:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:08:56 Point started: ret=0 09:08:56 point_skyscan result=0 09:08:56 Check angles 09:08:56 SkyScan query 09:08:57 SkyScan query done: ret=0 az=152.79<-10186 ze=6.51<-11566 Statuses=0009 0008 09:08:57 Msec=0 True Az=152.79 Ze=6.51 Az status=0009 Ze status=0008 09:08:57 Check angles 09:08:57 SkyScan query 09:08:58 SkyScan query done: ret=0 az=135.285<-9019 ze=6.495<-11567 Statuses=0009 0008 09:08:58 Msec=750 True Az=135.285 Ze=6.495 Az status=0009 Ze status=0008 09:08:58 Check angles 09:08:58 SkyScan query 09:08:58 SkyScan query done: ret=0 az=117.48<-7832 ze=6.495<-11567 Statuses=0009 0008 09:08:58 Msec=1500 True Az=117.48 Ze=6.495 Az status=0009 Ze status=0008 09:08:59 Check angles 09:08:59 SkyScan query 09:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:08:59 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:08:59 Message to Master queued w/err=0: serial=82929 error=0 09:09:04 Received message from Master: op=Filter serial=82930 09:09:04 Color wheel filter change from 0 to 0 09:09:04 FLIGetFilterPos err=0 currentPosition=0 09:09:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:04 Filter is already there-color wheel unchanged 09:09:04 Received message from Master: op=Shutter serial=82931 09:09:04 Shutter LASER close 09:09:04 Received message from Camera: op=State serial=82933 09:09:04 GetSingleValue result=40 Value=cccccccc 09:09:04 SkyScan query 09:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:09:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:05 Parameters OK 09:09:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:05 Set A/D data flow result=40 09:09:05 Set A/D channel type result=40 09:09:05 Set A/D encoding result=40 09:09:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:05 Set channel filter=0.000000e+000 result=40 09:09:05 Config A/D Result=40 09:09:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:05 Get A/D filter: -9.255963e+061 result=40 09:09:05 Get A/D value=-858993460 result=40 09:09:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:05 Parameters OK 09:09:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:05 Set A/D data flow result=40 09:09:05 Set A/D channel type result=40 09:09:05 Set A/D encoding result=40 09:09:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:05 Set channel filter=0.000000e+000 result=40 09:09:05 Config A/D Result=40 09:09:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:05 Get A/D filter: -9.255963e+061 result=40 09:09:05 Get A/D value=-858993460 result=40 09:09:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:05 Aux= 09:09:05 Message to Camera, serial 82933 queued 09:09:42 Received message from Master: op=PointingHead serial=82946 09:09:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:09:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:09:42 Point started: ret=0 09:09:42 point_skyscan result=0 09:09:43 Check angles 09:09:43 SkyScan query 09:09:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 09:09:43 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 09:09:44 Check angles 09:09:44 SkyScan query 09:09:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 09:09:44 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 09:09:44 Check angles 09:09:44 SkyScan query 09:09:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 09:09:45 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 09:09:45 Check angles 09:09:45 SkyScan query 09:09:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 09:09:46 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 09:09:46 Check angles 09:09:46 SkyScan query 09:09:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.235<-19149 Statuses=0008 0009 09:09:46 Msec=3000 True Az=112.995 Ze=-107.235 Az status=0008 Ze status=0009 09:09:47 Check angles 09:09:47 SkyScan query 09:09:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.19<-20546 Statuses=0008 0009 09:09:47 Msec=3750 True Az=112.995 Ze=-128.19 Az status=0008 Ze status=0009 09:09:47 Check angles 09:09:47 SkyScan query 09:09:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.145<-21943 Statuses=0008 0009 09:09:48 Msec=4500 True Az=112.995 Ze=-149.145 Az status=0008 Ze status=0009 09:09:48 Check angles 09:09:48 SkyScan query 09:09:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.1<-23340 Statuses=0008 0009 09:09:49 Msec=5250 True Az=112.995 Ze=-170.1 Az status=0008 Ze status=0009 09:09:49 Check angles 09:09:49 SkyScan query 09:09:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:09:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:09:49 Message to Master queued w/err=0: serial=82946 error=0 09:09:54 Received message from Master: op=Filter serial=82947 09:09:54 Color wheel filter change from 0 to 0 09:09:54 FLIGetFilterPos err=0 currentPosition=0 09:09:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:54 Filter is already there-color wheel unchanged 09:09:55 Received message from Master: op=Shutter serial=82948 09:09:55 Shutter LASER open 09:09:55 Received message from Camera: op=State serial=82950 09:09:55 GetSingleValue result=40 Value=cccccccc 09:09:55 SkyScan query 09:09:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:09:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:55 Parameters OK 09:09:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:55 Set A/D data flow result=40 09:09:55 Set A/D channel type result=40 09:09:55 Set A/D encoding result=40 09:09:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:55 Set channel filter=0.000000e+000 result=40 09:09:55 Config A/D Result=40 09:09:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:55 Get A/D filter: -9.255963e+061 result=40 09:09:55 Get A/D value=-858993460 result=40 09:09:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:55 Parameters OK 09:09:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:55 Set A/D data flow result=40 09:09:55 Set A/D channel type result=40 09:09:55 Set A/D encoding result=40 09:09:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:55 Set channel filter=0.000000e+000 result=40 09:09:55 Config A/D Result=40 09:09:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:55 Get A/D filter: -9.255963e+061 result=40 09:09:55 Get A/D value=-858993460 result=40 09:09:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:55 Aux= 09:09:55 Message to Camera, serial 82950 queued 09:10:04 Received message from Master: op=Shutter serial=82960 09:10:04 Shutter LASER close 09:10:04 Received message from Master: op=PointingHead serial=82964 09:10:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:10:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:10:05 Point started: ret=0 09:10:05 point_skyscan result=0 09:10:05 Check angles 09:10:05 SkyScan query 09:10:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 09:10:06 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 09:10:06 Check angles 09:10:06 SkyScan query 09:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 09:10:07 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 09:10:07 Check angles 09:10:07 SkyScan query 09:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 09:10:07 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 09:10:08 Check angles 09:10:08 SkyScan query 09:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 09:10:08 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 09:10:08 Check angles 09:10:08 SkyScan query 09:10:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 09:10:09 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 09:10:09 Check angles 09:10:09 SkyScan query 09:10:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 09:10:10 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 09:10:10 Check angles 09:10:10 SkyScan query 09:10:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 09:10:10 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 09:10:11 Check angles 09:10:11 SkyScan query 09:10:11 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 09:10:11 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 09:10:11 Check angles 09:10:11 SkyScan query 09:10:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:10:12 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:10:12 Message to Master queued w/err=0: serial=82964 error=0 09:10:17 Received message from Master: op=Filter serial=82965 09:10:17 Color wheel filter change from 0 to 0 09:10:17 FLIGetFilterPos err=0 currentPosition=0 09:10:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:17 Filter is already there-color wheel unchanged 09:10:17 Received message from Master: op=Shutter serial=82966 09:10:17 Shutter LASER close 09:10:17 Received message from Camera: op=State serial=82968 09:10:17 GetSingleValue result=40 Value=cccccccc 09:10:17 SkyScan query 09:10:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:18 Parameters OK 09:10:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:18 Set A/D data flow result=40 09:10:18 Set A/D channel type result=40 09:10:18 Set A/D encoding result=40 09:10:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:18 Set channel filter=0.000000e+000 result=40 09:10:18 Config A/D Result=40 09:10:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:18 Get A/D filter: -9.255963e+061 result=40 09:10:18 Get A/D value=-858993460 result=40 09:10:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:18 Parameters OK 09:10:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:18 Set A/D data flow result=40 09:10:18 Set A/D channel type result=40 09:10:18 Set A/D encoding result=40 09:10:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:18 Set channel filter=0.000000e+000 result=40 09:10:18 Config A/D Result=40 09:10:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:18 Get A/D filter: -9.255963e+061 result=40 09:10:18 Get A/D value=-858993460 result=40 09:10:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:18 Aux= 09:10:18 Message to Camera, serial 82968 queued 09:10:55 Received message from Master: op=PointingHead serial=82981 09:10:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:10:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:10:55 Point started: ret=0 09:10:55 point_skyscan result=0 09:10:56 Check angles 09:10:56 SkyScan query 09:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:10:56 Message to Master queued w/err=0: serial=82981 error=0 09:11:01 Received message from Master: op=Filter serial=82982 09:11:01 Color wheel filter change from 0 to 0 09:11:01 FLIGetFilterPos err=0 currentPosition=0 09:11:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:01 Filter is already there-color wheel unchanged 09:11:02 Received message from Master: op=Shutter serial=82983 09:11:02 Shutter LASER close 09:11:02 Received message from Camera: op=State serial=82985 09:11:02 GetSingleValue result=40 Value=cccccccc 09:11:02 SkyScan query 09:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:11:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:02 Parameters OK 09:11:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:02 Set A/D data flow result=40 09:11:02 Set A/D channel type result=40 09:11:02 Set A/D encoding result=40 09:11:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:02 Set channel filter=0.000000e+000 result=40 09:11:02 Config A/D Result=40 09:11:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:02 Get A/D filter: -9.255963e+061 result=40 09:11:02 Get A/D value=-858993460 result=40 09:11:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:02 Parameters OK 09:11:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:02 Set A/D data flow result=40 09:11:02 Set A/D channel type result=40 09:11:02 Set A/D encoding result=40 09:11:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:02 Set channel filter=0.000000e+000 result=40 09:11:02 Config A/D Result=40 09:11:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:02 Get A/D filter: -9.255963e+061 result=40 09:11:02 Get A/D value=-858993460 result=40 09:11:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:02 Aux= 09:11:02 Message to Camera, serial 82985 queued 09:11:39 Received message from Master: op=PointingHead serial=82998 09:11:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:11:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:11:39 Point started: ret=0 09:11:39 point_skyscan result=0 09:11:40 Check angles 09:11:40 SkyScan query 09:11:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:11:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:11:41 Message to Master queued w/err=0: serial=82998 error=0 09:11:46 Received message from Master: op=Filter serial=82999 09:11:46 Color wheel filter change from 0 to 0 09:11:46 FLIGetFilterPos err=0 currentPosition=0 09:11:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:46 Filter is already there-color wheel unchanged 09:11:46 Received message from Master: op=Shutter serial=83000 09:11:46 Shutter LASER close 09:11:46 Received message from Camera: op=State serial=83002 09:11:46 GetSingleValue result=40 Value=cccccccc 09:11:46 SkyScan query 09:11:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:11:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:46 Parameters OK 09:11:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:46 Set A/D data flow result=40 09:11:46 Set A/D channel type result=40 09:11:46 Set A/D encoding result=40 09:11:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:46 Set channel filter=0.000000e+000 result=40 09:11:46 Config A/D Result=40 09:11:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:46 Get A/D filter: -9.255963e+061 result=40 09:11:46 Get A/D value=-858993460 result=40 09:11:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:46 Parameters OK 09:11:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:46 Set A/D data flow result=40 09:11:46 Set A/D channel type result=40 09:11:46 Set A/D encoding result=40 09:11:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:46 Set channel filter=0.000000e+000 result=40 09:11:46 Config A/D Result=40 09:11:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:46 Get A/D filter: -9.255963e+061 result=40 09:11:46 Get A/D value=-858993460 result=40 09:11:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:46 Aux= 09:11:46 Message to Camera, serial 83002 queued 09:12:23 Received message from Master: op=PointingHead serial=83015 09:12:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:12:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:12:24 Point started: ret=0 09:12:24 point_skyscan result=0 09:12:24 Check angles 09:12:24 SkyScan query 09:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:12:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:12:25 Message to Master queued w/err=0: serial=83015 error=0 09:12:30 Received message from Master: op=Filter serial=83016 09:12:30 Color wheel filter change from 0 to 0 09:12:30 FLIGetFilterPos err=0 currentPosition=0 09:12:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:30 Filter is already there-color wheel unchanged 09:12:30 Received message from Master: op=Shutter serial=83017 09:12:30 Shutter LASER close 09:12:30 Received message from Camera: op=State serial=83019 09:12:30 GetSingleValue result=40 Value=cccccccc 09:12:30 SkyScan query 09:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:12:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:31 Parameters OK 09:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:31 Set A/D data flow result=40 09:12:31 Set A/D channel type result=40 09:12:31 Set A/D encoding result=40 09:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:31 Set channel filter=0.000000e+000 result=40 09:12:31 Config A/D Result=40 09:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:31 Get A/D filter: -9.255963e+061 result=40 09:12:31 Get A/D value=-858993460 result=40 09:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:31 Parameters OK 09:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:31 Set A/D data flow result=40 09:12:31 Set A/D channel type result=40 09:12:31 Set A/D encoding result=40 09:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:31 Set channel filter=0.000000e+000 result=40 09:12:31 Config A/D Result=40 09:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:31 Get A/D filter: -9.255963e+061 result=40 09:12:31 Get A/D value=-858993460 result=40 09:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:31 Aux= 09:12:31 Message to Camera, serial 83019 queued 09:13:08 Received message from Master: op=PointingHead serial=83032 09:13:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:13:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:13:08 Point started: ret=0 09:13:08 point_skyscan result=0 09:13:09 Check angles 09:13:09 SkyScan query 09:13:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 09:13:09 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 09:13:09 Check angles 09:13:09 SkyScan query 09:13:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.01<-14934 Statuses=0008 0009 09:13:10 Msec=750 True Az=112.995 Ze=-44.01 Az status=0008 Ze status=0009 09:13:10 Check angles 09:13:10 SkyScan query 09:13:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.98<-16332 Statuses=0008 0009 09:13:11 Msec=1500 True Az=112.995 Ze=-64.98 Az status=0008 Ze status=0009 09:13:11 Check angles 09:13:11 SkyScan query 09:13:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 09:13:11 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 09:13:12 Check angles 09:13:12 SkyScan query 09:13:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 09:13:12 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 09:13:12 Check angles 09:13:12 SkyScan query 09:13:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.845<-20523 Statuses=0008 0009 09:13:13 Msec=3750 True Az=112.995 Ze=-127.845 Az status=0008 Ze status=0009 09:13:13 Check angles 09:13:13 SkyScan query 09:13:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.8<-21920 Statuses=0008 0009 09:13:14 Msec=4500 True Az=112.995 Ze=-148.8 Az status=0008 Ze status=0009 09:13:14 Check angles 09:13:14 SkyScan query 09:13:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.725<-23315 Statuses=0008 0009 09:13:14 Msec=5250 True Az=112.995 Ze=-169.725 Az status=0008 Ze status=0009 09:13:15 Check angles 09:13:15 SkyScan query 09:13:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:13:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:13:15 Message to Master queued w/err=0: serial=83032 error=0 09:13:20 Received message from Master: op=Filter serial=83033 09:13:20 Color wheel filter change from 0 to 0 09:13:20 FLIGetFilterPos err=0 currentPosition=0 09:13:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:20 Filter is already there-color wheel unchanged 09:13:20 Received message from Master: op=Shutter serial=83034 09:13:20 Shutter LASER open 09:13:21 Received message from Camera: op=State serial=83036 09:13:21 GetSingleValue result=40 Value=cccccccc 09:13:21 SkyScan query 09:13:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:13:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:21 Parameters OK 09:13:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:21 Set A/D data flow result=40 09:13:21 Set A/D channel type result=40 09:13:21 Set A/D encoding result=40 09:13:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:21 Set channel filter=0.000000e+000 result=40 09:13:21 Config A/D Result=40 09:13:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:21 Get A/D filter: -9.255963e+061 result=40 09:13:21 Get A/D value=-858993460 result=40 09:13:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:21 Parameters OK 09:13:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:21 Set A/D data flow result=40 09:13:21 Set A/D channel type result=40 09:13:21 Set A/D encoding result=40 09:13:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:21 Set channel filter=0.000000e+000 result=40 09:13:21 Config A/D Result=40 09:13:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:21 Get A/D filter: -9.255963e+061 result=40 09:13:21 Get A/D value=-858993460 result=40 09:13:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:21 Aux= 09:13:21 Message to Camera, serial 83036 queued 09:13:29 Received message from Master: op=Shutter serial=83045 09:13:29 Shutter LASER close 09:13:29 Received message from Master: op=PointingHead serial=83049 09:13:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:13:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:13:30 Point started: ret=0 09:13:30 point_skyscan result=0 09:13:30 Check angles 09:13:30 SkyScan query 09:13:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 09:13:31 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 09:13:31 Check angles 09:13:31 SkyScan query 09:13:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.22<-20148 Statuses=0008 0009 09:13:32 Msec=750 True Az=112.995 Ze=-122.22 Az status=0008 Ze status=0009 09:13:32 Check angles 09:13:32 SkyScan query 09:13:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 09:13:32 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 09:13:33 Check angles 09:13:33 SkyScan query 09:13:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 09:13:33 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 09:13:33 Check angles 09:13:33 SkyScan query 09:13:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 09:13:34 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 09:13:34 Check angles 09:13:34 SkyScan query 09:13:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.95<-14530 Statuses=0008 0009 09:13:35 Msec=3750 True Az=112.995 Ze=-37.95 Az status=0008 Ze status=0009 09:13:35 Check angles 09:13:35 SkyScan query 09:13:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 09:13:35 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 09:13:36 Check angles 09:13:36 SkyScan query 09:13:36 SkyScan query done: ret=0 az=112.995<-7533 ze=4.335<-11711 Statuses=0008 0009 09:13:36 Msec=5250 True Az=112.995 Ze=4.335 Az status=0008 Ze status=0009 09:13:36 Check angles 09:13:36 SkyScan query 09:13:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:13:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:13:37 Message to Master queued w/err=0: serial=83049 error=0 09:13:42 Received message from Master: op=Filter serial=83050 09:13:42 Color wheel filter change from 0 to 0 09:13:42 FLIGetFilterPos err=0 currentPosition=0 09:13:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:42 Filter is already there-color wheel unchanged 09:13:42 Received message from Master: op=Shutter serial=83051 09:13:42 Shutter LASER close 09:13:42 Received message from Camera: op=State serial=83053 09:13:42 GetSingleValue result=40 Value=cccccccc 09:13:42 SkyScan query 09:13:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:13:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:43 Parameters OK 09:13:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:43 Set A/D data flow result=40 09:13:43 Set A/D channel type result=40 09:13:43 Set A/D encoding result=40 09:13:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:43 Set channel filter=0.000000e+000 result=40 09:13:43 Config A/D Result=40 09:13:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:43 Get A/D filter: -9.255963e+061 result=40 09:13:43 Get A/D value=-858993460 result=40 09:13:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:43 Parameters OK 09:13:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:43 Set A/D data flow result=40 09:13:43 Set A/D channel type result=40 09:13:43 Set A/D encoding result=40 09:13:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:43 Set channel filter=0.000000e+000 result=40 09:13:43 Config A/D Result=40 09:13:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:43 Get A/D filter: -9.255963e+061 result=40 09:13:43 Get A/D value=-858993460 result=40 09:13:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:43 Aux= 09:13:43 Message to Camera, serial 83053 queued 09:14:20 Received message from Master: op=PointingHead serial=83066 09:14:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:14:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:14:20 Point started: ret=0 09:14:20 point_skyscan result=0 09:14:21 Check angles 09:14:21 SkyScan query 09:14:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:14:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:14:21 Message to Master queued w/err=0: serial=83066 error=0 09:14:26 Received message from Master: op=Filter serial=83067 09:14:26 Color wheel filter change from 0 to 0 [UTC 2019-3-3 09:14:26] 09:14:26 FLIGetFilterPos err=0 currentPosition=0 09:14:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:26 Filter is already there-color wheel unchanged 09:14:27 Received message from Master: op=Shutter serial=83068 09:14:27 Shutter LASER close 09:14:27 Received message from Camera: op=State serial=83070 09:14:27 GetSingleValue result=40 Value=cccccccc 09:14:27 SkyScan query 09:14:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:14:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:27 Parameters OK 09:14:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:27 Set A/D data flow result=40 09:14:27 Set A/D channel type result=40 09:14:27 Set A/D encoding result=40 09:14:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:27 Set channel filter=0.000000e+000 result=40 09:14:27 Config A/D Result=40 09:14:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:27 Get A/D filter: -9.255963e+061 result=40 09:14:27 Get A/D value=-858993460 result=40 09:14:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:27 Parameters OK 09:14:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:27 Set A/D data flow result=40 09:14:27 Set A/D channel type result=40 09:14:27 Set A/D encoding result=40 09:14:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:27 Set channel filter=0.000000e+000 result=40 09:14:27 Config A/D Result=40 09:14:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:27 Get A/D filter: -9.255963e+061 result=40 09:14:27 Get A/D value=-858993460 result=40 09:14:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:27 Aux= 09:14:27 Message to Camera, serial 83070 queued 09:15:04 Received message from Master: op=PointingHead serial=83083 09:15:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:15:04 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:15:04 Point started: ret=0 09:15:04 point_skyscan result=0 09:15:05 Check angles 09:15:05 SkyScan query 09:15:06 SkyScan query done: ret=0 az=135.87<-9058 ze=-6.51<-12434 Statuses=0009 0008 09:15:06 Msec=0 True Az=135.87 Ze=-6.51 Az status=0009 Ze status=0008 09:15:06 Check angles 09:15:06 SkyScan query 09:15:07 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.495<-12433 Statuses=0009 0008 09:15:07 Msec=750 True Az=153.735 Ze=-6.495 Az status=0009 Ze status=0008 09:15:07 Check angles 09:15:07 SkyScan query 09:15:07 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 09:15:07 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 09:15:07 Check angles 09:15:07 SkyScan query 09:15:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:15:08 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:15:08 Message to Master queued w/err=0: serial=83083 error=0 09:15:13 Received message from Master: op=Filter serial=83084 09:15:13 Color wheel filter change from 0 to 0 09:15:13 FLIGetFilterPos err=0 currentPosition=0 09:15:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:13 Filter is already there-color wheel unchanged 09:15:13 Received message from Master: op=Shutter serial=83085 09:15:13 Shutter LASER close 09:15:13 Received message from Camera: op=State serial=83087 09:15:13 GetSingleValue result=40 Value=cccccccc 09:15:13 SkyScan query 09:15:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:15:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:14 Parameters OK 09:15:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:14 Set A/D data flow result=40 09:15:14 Set A/D channel type result=40 09:15:14 Set A/D encoding result=40 09:15:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:14 Set channel filter=0.000000e+000 result=40 09:15:14 Config A/D Result=40 09:15:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:14 Get A/D filter: -9.255963e+061 result=40 09:15:14 Get A/D value=-858993460 result=40 09:15:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:14 Parameters OK 09:15:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:14 Set A/D data flow result=40 09:15:14 Set A/D channel type result=40 09:15:14 Set A/D encoding result=40 09:15:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:14 Set channel filter=0.000000e+000 result=40 09:15:14 Config A/D Result=40 09:15:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:14 Get A/D filter: -9.255963e+061 result=40 09:15:14 Get A/D value=-858993460 result=40 09:15:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:14 Aux= 09:15:14 Message to Camera, serial 83087 queued 09:15:51 Received message from Master: op=PointingHead serial=83100 09:15:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:15:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:15:51 Point started: ret=0 09:15:51 point_skyscan result=0 09:15:52 Check angles 09:15:52 SkyScan query 09:15:52 SkyScan query done: ret=0 az=153.015<-10201 ze=6.51<-11566 Statuses=0009 0008 09:15:52 Msec=0 True Az=153.015 Ze=6.51 Az status=0009 Ze status=0008 09:15:53 Check angles 09:15:53 SkyScan query 09:15:53 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 09:15:53 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 09:15:53 Check angles 09:15:53 SkyScan query 09:15:54 SkyScan query done: ret=0 az=117.225<-7815 ze=6.495<-11567 Statuses=0009 0008 09:15:54 Msec=1500 True Az=117.225 Ze=6.495 Az status=0009 Ze status=0008 09:15:54 Check angles 09:15:54 SkyScan query 09:15:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:15:55 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:15:55 Message to Master queued w/err=0: serial=83100 error=0 09:16:00 Received message from Master: op=Filter serial=83101 09:16:00 Color wheel filter change from 0 to 0 09:16:00 FLIGetFilterPos err=0 currentPosition=0 09:16:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:00 Filter is already there-color wheel unchanged 09:16:00 Received message from Master: op=Shutter serial=83102 09:16:00 Shutter LASER close 09:16:00 Received message from Camera: op=State serial=83104 09:16:00 GetSingleValue result=40 Value=cccccccc 09:16:00 SkyScan query 09:16:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:16:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:00 Parameters OK 09:16:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:00 Set A/D data flow result=40 09:16:00 Set A/D channel type result=40 09:16:00 Set A/D encoding result=40 09:16:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:00 Set channel filter=0.000000e+000 result=40 09:16:00 Config A/D Result=40 09:16:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:00 Get A/D filter: -9.255963e+061 result=40 09:16:00 Get A/D value=-858993460 result=40 09:16:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:00 Parameters OK 09:16:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:00 Set A/D data flow result=40 09:16:00 Set A/D channel type result=40 09:16:00 Set A/D encoding result=40 09:16:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:00 Set channel filter=0.000000e+000 result=40 09:16:00 Config A/D Result=40 09:16:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:00 Get A/D filter: -9.255963e+061 result=40 09:16:00 Get A/D value=-858993460 result=40 09:16:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:00 Aux= 09:16:00 Message to Camera, serial 83104 queued 09:16:37 Received message from Master: op=PointingHead serial=83117 09:16:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:16:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:16:38 Point started: ret=0 09:16:38 point_skyscan result=0 09:16:38 Check angles 09:16:38 SkyScan query 09:16:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 09:16:39 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 09:16:39 Check angles 09:16:39 SkyScan query 09:16:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 09:16:40 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 09:16:40 Check angles 09:16:40 SkyScan query 09:16:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.28<-16352 Statuses=0008 0009 09:16:40 Msec=1500 True Az=112.995 Ze=-65.28 Az status=0008 Ze status=0009 09:16:41 Check angles 09:16:41 SkyScan query 09:16:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.25<-17750 Statuses=0008 0009 09:16:41 Msec=2250 True Az=112.995 Ze=-86.25 Az status=0008 Ze status=0009 09:16:41 Check angles 09:16:41 SkyScan query 09:16:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.175<-19145 Statuses=0008 0009 09:16:42 Msec=3000 True Az=112.995 Ze=-107.175 Az status=0008 Ze status=0009 09:16:42 Check angles 09:16:42 SkyScan query 09:16:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.145<-20543 Statuses=0008 0009 09:16:43 Msec=3750 True Az=112.995 Ze=-128.145 Az status=0008 Ze status=0009 09:16:43 Check angles 09:16:43 SkyScan query 09:16:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.085<-21939 Statuses=0008 0009 09:16:43 Msec=4500 True Az=112.995 Ze=-149.085 Az status=0008 Ze status=0009 09:16:44 Check angles 09:16:44 SkyScan query 09:16:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.025<-23335 Statuses=0008 0009 09:16:44 Msec=5250 True Az=112.995 Ze=-170.025 Az status=0008 Ze status=0009 09:16:44 Check angles 09:16:44 SkyScan query 09:16:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:16:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:16:45 Message to Master queued w/err=0: serial=83117 error=0 09:16:50 Received message from Master: op=Filter serial=83118 09:16:50 Color wheel filter change from 0 to 0 09:16:50 FLIGetFilterPos err=0 currentPosition=0 09:16:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:50 Filter is already there-color wheel unchanged 09:16:50 Received message from Master: op=Shutter serial=83119 09:16:50 Shutter LASER open 09:16:50 Received message from Camera: op=State serial=83121 09:16:50 GetSingleValue result=40 Value=cccccccc 09:16:50 SkyScan query 09:16:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:16:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:51 Parameters OK 09:16:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:51 Set A/D data flow result=40 09:16:51 Set A/D channel type result=40 09:16:51 Set A/D encoding result=40 09:16:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:51 Set channel filter=0.000000e+000 result=40 09:16:51 Config A/D Result=40 09:16:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:51 Get A/D filter: -9.255963e+061 result=40 09:16:51 Get A/D value=-858993460 result=40 09:16:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:51 Parameters OK 09:16:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:51 Set A/D data flow result=40 09:16:51 Set A/D channel type result=40 09:16:51 Set A/D encoding result=40 09:16:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:51 Set channel filter=0.000000e+000 result=40 09:16:51 Config A/D Result=40 09:16:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:51 Get A/D filter: -9.255963e+061 result=40 09:16:51 Get A/D value=-858993460 result=40 09:16:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:51 Aux= 09:16:51 Message to Camera, serial 83121 queued 09:16:59 Received message from Master: op=Shutter serial=83131 09:16:59 Shutter LASER close 09:17:00 Received message from Master: op=PointingHead serial=83135 09:17:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:17:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:17:00 Point started: ret=0 09:17:00 point_skyscan result=0 09:17:01 Check angles 09:17:01 SkyScan query 09:17:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.535<-21569 Statuses=0008 0009 09:17:01 Msec=0 True Az=112.995 Ze=-143.535 Az status=0008 Ze status=0009 09:17:02 Check angles 09:17:02 SkyScan query 09:17:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 09:17:02 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 09:17:02 Check angles 09:17:02 SkyScan query 09:17:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 09:17:03 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 09:17:03 Check angles 09:17:03 SkyScan query 09:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 09:17:04 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 09:17:04 Check angles 09:17:04 SkyScan query 09:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.28<-15952 Statuses=0008 0009 09:17:04 Msec=3000 True Az=112.995 Ze=-59.28 Az status=0008 Ze status=0009 09:17:05 Check angles 09:17:05 SkyScan query 09:17:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.31<-14554 Statuses=0008 0009 09:17:05 Msec=3750 True Az=112.995 Ze=-38.31 Az status=0008 Ze status=0009 09:17:05 Check angles 09:17:05 SkyScan query 09:17:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.37<-13158 Statuses=0008 0009 09:17:06 Msec=4500 True Az=112.995 Ze=-17.37 Az status=0008 Ze status=0009 09:17:06 Check angles 09:17:06 SkyScan query 09:17:07 SkyScan query done: ret=0 az=112.995<-7533 ze=3.585<-11761 Statuses=0008 0009 09:17:07 Msec=5250 True Az=112.995 Ze=3.585 Az status=0008 Ze status=0009 09:17:07 Check angles 09:17:07 SkyScan query 09:17:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:17:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:17:07 Message to Master queued w/err=0: serial=83135 error=0 09:17:12 Received message from Master: op=Filter serial=83136 09:17:12 Color wheel filter change from 0 to 0 09:17:12 FLIGetFilterPos err=0 currentPosition=0 09:17:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:12 Filter is already there-color wheel unchanged 09:17:13 Received message from Master: op=Shutter serial=83137 09:17:13 Shutter LASER close 09:17:13 Received message from Camera: op=State serial=83139 09:17:13 GetSingleValue result=40 Value=cccccccc 09:17:13 SkyScan query 09:17:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:17:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:13 Parameters OK 09:17:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:13 Set A/D data flow result=40 09:17:13 Set A/D channel type result=40 09:17:13 Set A/D encoding result=40 09:17:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:13 Set channel filter=0.000000e+000 result=40 09:17:13 Config A/D Result=40 09:17:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:13 Get A/D filter: -9.255963e+061 result=40 09:17:13 Get A/D value=-858993460 result=40 09:17:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:13 Parameters OK 09:17:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:13 Set A/D data flow result=40 09:17:13 Set A/D channel type result=40 09:17:13 Set A/D encoding result=40 09:17:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:13 Set channel filter=0.000000e+000 result=40 09:17:13 Config A/D Result=40 09:17:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:13 Get A/D filter: -9.255963e+061 result=40 09:17:13 Get A/D value=-858993460 result=40 09:17:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:13 Aux= 09:17:13 Message to Camera, serial 83139 queued 09:17:50 Received message from Master: op=PointingHead serial=83152 09:17:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:17:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:17:51 Point started: ret=0 09:17:51 point_skyscan result=0 09:17:51 Check angles 09:17:51 SkyScan query 09:17:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:17:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:17:52 Message to Master queued w/err=0: serial=83152 error=0 09:17:57 Received message from Master: op=Filter serial=83153 09:17:57 Color wheel filter change from 0 to 0 09:17:57 FLIGetFilterPos err=0 currentPosition=0 09:17:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:57 Filter is already there-color wheel unchanged 09:17:57 Received message from Master: op=Shutter serial=83154 09:17:57 Shutter LASER close 09:17:57 Received message from Camera: op=State serial=83156 09:17:57 GetSingleValue result=40 Value=cccccccc 09:17:57 SkyScan query 09:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:17:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:58 Parameters OK 09:17:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:58 Set A/D data flow result=40 09:17:58 Set A/D channel type result=40 09:17:58 Set A/D encoding result=40 09:17:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:58 Set channel filter=0.000000e+000 result=40 09:17:58 Config A/D Result=40 09:17:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:58 Get A/D filter: -9.255963e+061 result=40 09:17:58 Get A/D value=-858993460 result=40 09:17:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:58 Parameters OK 09:17:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:58 Set A/D data flow result=40 09:17:58 Set A/D channel type result=40 09:17:58 Set A/D encoding result=40 09:17:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:58 Set channel filter=0.000000e+000 result=40 09:17:58 Config A/D Result=40 09:17:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:58 Get A/D filter: -9.255963e+061 result=40 09:17:58 Get A/D value=-858993460 result=40 09:17:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:58 Aux= 09:17:58 Message to Camera, serial 83156 queued 09:18:35 Received message from Master: op=PointingHead serial=83169 09:18:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:18:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:18:35 Point started: ret=0 09:18:35 point_skyscan result=0 09:18:36 Check angles 09:18:36 SkyScan query 09:18:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:18:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:18:36 Message to Master queued w/err=0: serial=83169 error=0 09:18:41 Received message from Master: op=Filter serial=83170 09:18:41 Color wheel filter change from 0 to 0 09:18:41 FLIGetFilterPos err=0 currentPosition=0 09:18:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:41 Filter is already there-color wheel unchanged 09:18:41 Received message from Master: op=Shutter serial=83171 09:18:41 Shutter LASER close 09:18:41 Received message from Camera: op=State serial=83173 09:18:41 GetSingleValue result=40 Value=cccccccc 09:18:41 SkyScan query 09:18:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:18:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:42 Parameters OK 09:18:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:42 Set A/D data flow result=40 09:18:42 Set A/D channel type result=40 09:18:42 Set A/D encoding result=40 09:18:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:42 Set channel filter=0.000000e+000 result=40 09:18:42 Config A/D Result=40 09:18:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:42 Get A/D filter: -9.255963e+061 result=40 09:18:42 Get A/D value=-858993460 result=40 09:18:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:42 Parameters OK 09:18:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:42 Set A/D data flow result=40 09:18:42 Set A/D channel type result=40 09:18:42 Set A/D encoding result=40 09:18:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:42 Set channel filter=0.000000e+000 result=40 09:18:42 Config A/D Result=40 09:18:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:42 Get A/D filter: -9.255963e+061 result=40 09:18:42 Get A/D value=-858993460 result=40 09:18:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:42 Aux= 09:18:42 Message to Camera, serial 83173 queued 09:19:19 Received message from Master: op=PointingHead serial=83186 09:19:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:19:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:19:19 Point started: ret=0 09:19:19 point_skyscan result=0 09:19:20 Check angles 09:19:20 SkyScan query 09:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:19:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:19:21 Message to Master queued w/err=0: serial=83186 error=0 09:19:26 Received message from Master: op=Filter serial=83187 09:19:26 Color wheel filter change from 0 to 0 09:19:26 FLIGetFilterPos err=0 currentPosition=0 09:19:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:26 Filter is already there-color wheel unchanged 09:19:26 Received message from Master: op=Shutter serial=83188 09:19:26 Shutter LASER close 09:19:26 Received message from Camera: op=State serial=83190 09:19:26 GetSingleValue result=40 Value=cccccccc 09:19:26 SkyScan query 09:19:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:19:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:26 Parameters OK 09:19:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:26 Set A/D data flow result=40 09:19:26 Set A/D channel type result=40 09:19:26 Set A/D encoding result=40 09:19:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:26 Set channel filter=0.000000e+000 result=40 09:19:26 Config A/D Result=40 09:19:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:26 Get A/D filter: -9.255963e+061 result=40 09:19:26 Get A/D value=-858993460 result=40 09:19:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:26 Parameters OK 09:19:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:26 Set A/D data flow result=40 09:19:26 Set A/D channel type result=40 09:19:26 Set A/D encoding result=40 09:19:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:26 Set channel filter=0.000000e+000 result=40 09:19:26 Config A/D Result=40 09:19:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:26 Get A/D filter: -9.255963e+061 result=40 09:19:26 Get A/D value=-858993460 result=40 09:19:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:26 Aux= 09:19:26 Message to Camera, serial 83190 queued 09:20:03 Received message from Master: op=PointingHead serial=83203 09:20:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:20:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:20:03 Point started: ret=0 09:20:03 point_skyscan result=0 09:20:04 Check angles 09:20:04 SkyScan query 09:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 09:20:05 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 09:20:05 Check angles 09:20:05 SkyScan query 09:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 09:20:06 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 09:20:06 Check angles 09:20:06 SkyScan query 09:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 09:20:06 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 09:20:06 Check angles 09:20:06 SkyScan query 09:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.98<-17732 Statuses=0008 0009 09:20:07 Msec=2250 True Az=112.995 Ze=-85.98 Az status=0008 Ze status=0009 09:20:07 Check angles 09:20:07 SkyScan query 09:20:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.905<-19127 Statuses=0008 0009 09:20:08 Msec=3000 True Az=112.995 Ze=-106.905 Az status=0008 Ze status=0009 09:20:08 Check angles 09:20:08 SkyScan query 09:20:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.905<-20527 Statuses=0008 0009 09:20:09 Msec=3750 True Az=112.995 Ze=-127.905 Az status=0008 Ze status=0009 09:20:09 Check angles 09:20:09 SkyScan query 09:20:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.815<-21921 Statuses=0008 0009 09:20:09 Msec=4500 True Az=112.995 Ze=-148.815 Az status=0008 Ze status=0009 09:20:09 Check angles 09:20:09 SkyScan query 09:20:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.785<-23319 Statuses=0008 0009 09:20:10 Msec=5250 True Az=112.995 Ze=-169.785 Az status=0008 Ze status=0009 09:20:10 Check angles 09:20:10 SkyScan query 09:20:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:20:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:20:11 Message to Master queued w/err=0: serial=83203 error=0 09:20:16 Received message from Master: op=Filter serial=83204 09:20:16 Color wheel filter change from 0 to 0 09:20:16 FLIGetFilterPos err=0 currentPosition=0 09:20:16 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:16 Filter is already there-color wheel unchanged 09:20:16 Received message from Master: op=Shutter serial=83205 09:20:16 Shutter LASER open 09:20:16 Received message from Camera: op=State serial=83207 09:20:16 GetSingleValue result=40 Value=cccccccc 09:20:16 SkyScan query 09:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:20:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:17 Parameters OK 09:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:17 Set A/D data flow result=40 09:20:17 Set A/D channel type result=40 09:20:17 Set A/D encoding result=40 09:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:17 Set channel filter=0.000000e+000 result=40 09:20:17 Config A/D Result=40 09:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:17 Get A/D filter: -9.255963e+061 result=40 09:20:17 Get A/D value=-858993460 result=40 09:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:17 Parameters OK 09:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:17 Set A/D data flow result=40 09:20:17 Set A/D channel type result=40 09:20:17 Set A/D encoding result=40 09:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:17 Set channel filter=0.000000e+000 result=40 09:20:17 Config A/D Result=40 09:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:17 Get A/D filter: -9.255963e+061 result=40 09:20:17 Get A/D value=-858993460 result=40 09:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:17 Aux= 09:20:17 Message to Camera, serial 83207 queued 09:20:25 Received message from Master: op=Shutter serial=83217 09:20:25 Shutter LASER close 09:20:26 Received message from Master: op=PointingHead serial=83221 09:20:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:20:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:20:26 Point started: ret=0 09:20:26 point_skyscan result=0 09:20:27 Check angles 09:20:27 SkyScan query 09:20:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 09:20:27 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 09:20:28 Check angles 09:20:28 SkyScan query 09:20:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 09:20:28 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 09:20:28 Check angles 09:20:28 SkyScan query 09:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.8<-18720 Statuses=0008 0009 09:20:29 Msec=1500 True Az=112.995 Ze=-100.8 Az status=0008 Ze status=0009 09:20:29 Check angles 09:20:29 SkyScan query 09:20:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 09:20:30 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 09:20:30 Check angles 09:20:30 SkyScan query 09:20:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.44<-15896 Statuses=0008 0009 09:20:31 Msec=3000 True Az=112.995 Ze=-58.44 Az status=0008 Ze status=0009 09:20:31 Check angles 09:20:31 SkyScan query 09:20:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.065<-14471 Statuses=0008 0009 09:20:31 Msec=3750 True Az=112.995 Ze=-37.065 Az status=0008 Ze status=0009 09:20:31 Check angles 09:20:31 SkyScan query 09:20:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.095<-13073 Statuses=0008 0009 09:20:32 Msec=4500 True Az=112.995 Ze=-16.095 Az status=0008 Ze status=0009 09:20:32 Check angles 09:20:32 SkyScan query 09:20:33 SkyScan query done: ret=0 az=112.995<-7533 ze=4.995<-11667 Statuses=0008 0009 09:20:33 Msec=5250 True Az=112.995 Ze=4.995 Az status=0008 Ze status=0009 09:20:33 Check angles 09:20:33 SkyScan query 09:20:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:20:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:20:34 Message to Master queued w/err=0: serial=83221 error=0 09:20:39 Received message from Master: op=Filter serial=83222 09:20:39 Color wheel filter change from 0 to 0 09:20:39 FLIGetFilterPos err=0 currentPosition=0 09:20:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:39 Filter is already there-color wheel unchanged 09:20:39 Received message from Master: op=Shutter serial=83223 09:20:39 Shutter LASER close 09:20:39 Received message from Camera: op=State serial=83225 09:20:39 GetSingleValue result=40 Value=cccccccc 09:20:39 SkyScan query 09:20:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:20:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:39 Parameters OK 09:20:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:39 Set A/D data flow result=40 09:20:39 Set A/D channel type result=40 09:20:39 Set A/D encoding result=40 09:20:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:39 Set channel filter=0.000000e+000 result=40 09:20:39 Config A/D Result=40 09:20:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:39 Get A/D filter: -9.255963e+061 result=40 09:20:39 Get A/D value=-858993460 result=40 09:20:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:39 Parameters OK 09:20:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:39 Set A/D data flow result=40 09:20:39 Set A/D channel type result=40 09:20:39 Set A/D encoding result=40 09:20:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:39 Set channel filter=0.000000e+000 result=40 09:20:39 Config A/D Result=40 09:20:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:39 Get A/D filter: -9.255963e+061 result=40 09:20:39 Get A/D value=-858993460 result=40 09:20:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:39 Aux= 09:20:39 Message to Camera, serial 83225 queued 09:21:16 Received message from Master: op=PointingHead serial=83238 09:21:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:21:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:21:17 Point started: ret=0 09:21:17 point_skyscan result=0 09:21:17 Check angles 09:21:17 SkyScan query 09:21:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:21:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:21:18 Message to Master queued w/err=0: serial=83238 error=0 09:21:23 Received message from Master: op=Filter serial=83239 09:21:23 Color wheel filter change from 0 to 0 09:21:23 FLIGetFilterPos err=0 currentPosition=0 09:21:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:23 Filter is already there-color wheel unchanged 09:21:23 Received message from Master: op=Shutter serial=83240 09:21:23 Shutter LASER close 09:21:23 Received message from Camera: op=State serial=83242 09:21:23 GetSingleValue result=40 Value=cccccccc 09:21:23 SkyScan query 09:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:21:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:24 Parameters OK 09:21:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:24 Set A/D data flow result=40 09:21:24 Set A/D channel type result=40 09:21:24 Set A/D encoding result=40 09:21:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:24 Set channel filter=0.000000e+000 result=40 09:21:24 Config A/D Result=40 09:21:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:24 Get A/D filter: -9.255963e+061 result=40 09:21:24 Get A/D value=-858993460 result=40 09:21:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:24 Parameters OK 09:21:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:24 Set A/D data flow result=40 09:21:24 Set A/D channel type result=40 09:21:24 Set A/D encoding result=40 09:21:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:24 Set channel filter=0.000000e+000 result=40 09:21:24 Config A/D Result=40 09:21:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:24 Get A/D filter: -9.255963e+061 result=40 09:21:24 Get A/D value=-858993460 result=40 09:21:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:24 Aux= 09:21:24 Message to Camera, serial 83242 queued 09:22:01 Received message from Master: op=PointingHead serial=83255 09:22:01 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:22:01 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:22:01 Point started: ret=0 09:22:01 point_skyscan result=0 09:22:02 Check angles 09:22:02 SkyScan query 09:22:02 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.495<-12433 Statuses=0009 0008 09:22:02 Msec=0 True Az=135.915 Ze=-6.495 Az status=0009 Ze status=0008 09:22:02 Check angles 09:22:02 SkyScan query 09:22:03 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.48<-12432 Statuses=0009 0008 09:22:03 Msec=750 True Az=153.495 Ze=-6.48 Az status=0009 Ze status=0008 09:22:03 Check angles 09:22:03 SkyScan query 09:22:04 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.48<-12432 Statuses=0009 0008 09:22:04 Msec=1500 True Az=171.33 Ze=-6.48 Az status=0009 Ze status=0008 09:22:04 Check angles 09:22:04 SkyScan query 09:22:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 09:22:05 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 09:22:05 Message to Master queued w/err=0: serial=83255 error=0 09:22:10 Received message from Master: op=Filter serial=83256 09:22:10 Color wheel filter change from 0 to 0 09:22:10 FLIGetFilterPos err=0 currentPosition=0 09:22:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:10 Filter is already there-color wheel unchanged 09:22:10 Received message from Master: op=Shutter serial=83257 09:22:10 Shutter LASER close 09:22:10 Received message from Camera: op=State serial=83259 09:22:10 GetSingleValue result=40 Value=cccccccc 09:22:10 SkyScan query 09:22:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 09:22:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:10 Parameters OK 09:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:10 Set A/D data flow result=40 09:22:10 Set A/D channel type result=40 09:22:10 Set A/D encoding result=40 09:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:10 Set channel filter=0.000000e+000 result=40 09:22:10 Config A/D Result=40 09:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:10 Get A/D filter: -9.255963e+061 result=40 09:22:10 Get A/D value=-858993460 result=40 09:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:10 Parameters OK 09:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:10 Set A/D data flow result=40 09:22:10 Set A/D channel type result=40 09:22:10 Set A/D encoding result=40 09:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:10 Set channel filter=0.000000e+000 result=40 09:22:10 Config A/D Result=40 09:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:10 Get A/D filter: -9.255963e+061 result=40 09:22:10 Get A/D value=-858993460 result=40 09:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:10 Aux= 09:22:10 Message to Camera, serial 83259 queued 09:22:46 Received message from Master: op=PointingHead serial=83271 09:22:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:22:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:22:47 Point started: ret=0 09:22:47 point_skyscan result=0 09:22:47 Check angles 09:22:47 SkyScan query 09:22:48 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 09:22:48 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 09:22:48 Check angles 09:22:48 SkyScan query 09:22:49 SkyScan query done: ret=0 az=135.165<-9011 ze=6.495<-11567 Statuses=0009 0008 09:22:49 Msec=750 True Az=135.165 Ze=6.495 Az status=0009 Ze status=0008 09:22:49 Check angles 09:22:49 SkyScan query 09:22:49 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 09:22:49 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 09:22:50 Check angles 09:22:50 SkyScan query 09:22:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:22:50 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:22:50 Message to Master queued w/err=0: serial=83271 error=0 09:22:55 Received message from Master: op=Filter serial=83272 09:22:55 Color wheel filter change from 0 to 0 09:22:55 FLIGetFilterPos err=0 currentPosition=0 09:22:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:55 Filter is already there-color wheel unchanged 09:22:55 Received message from Master: op=Shutter serial=83273 09:22:55 Shutter LASER close 09:22:55 Received message from Camera: op=State serial=83275 09:22:55 GetSingleValue result=40 Value=cccccccc 09:22:55 SkyScan query 09:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:22:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:56 Parameters OK 09:22:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:56 Set A/D data flow result=40 09:22:56 Set A/D channel type result=40 09:22:56 Set A/D encoding result=40 09:22:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:56 Set channel filter=0.000000e+000 result=40 09:22:56 Config A/D Result=40 09:22:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:56 Get A/D filter: -9.255963e+061 result=40 09:22:56 Get A/D value=-858993460 result=40 09:22:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:56 Parameters OK 09:22:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:56 Set A/D data flow result=40 09:22:56 Set A/D channel type result=40 09:22:56 Set A/D encoding result=40 09:22:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:56 Set channel filter=0.000000e+000 result=40 09:22:56 Config A/D Result=40 09:22:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:56 Get A/D filter: -9.255963e+061 result=40 09:22:56 Get A/D value=-858993460 result=40 09:22:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:56 Aux= 09:22:56 Message to Camera, serial 83275 queued 09:23:33 Received message from Master: op=PointingHead serial=83288 09:23:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:23:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:23:33 Point started: ret=0 09:23:33 point_skyscan result=0 09:23:34 Check angles 09:23:34 SkyScan query 09:23:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 09:23:34 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 09:23:35 Check angles 09:23:35 SkyScan query 09:23:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 09:23:35 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 09:23:35 Check angles 09:23:35 SkyScan query 09:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 09:23:36 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 09:23:36 Check angles 09:23:36 SkyScan query 09:23:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.195<-17813 Statuses=0008 0009 09:23:37 Msec=2250 True Az=112.995 Ze=-87.195 Az status=0008 Ze status=0009 09:23:37 Check angles 09:23:37 SkyScan query 09:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.57<-19238 Statuses=0008 0009 09:23:38 Msec=3000 True Az=112.995 Ze=-108.57 Az status=0008 Ze status=0009 09:23:38 Check angles 09:23:38 SkyScan query 09:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.54<-20636 Statuses=0008 0009 09:23:38 Msec=3750 True Az=112.995 Ze=-129.54 Az status=0008 Ze status=0009 09:23:38 Check angles 09:23:38 SkyScan query 09:23:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.495<-22033 Statuses=0008 0009 09:23:39 Msec=4500 True Az=112.995 Ze=-150.495 Az status=0008 Ze status=0009 09:23:39 Check angles 09:23:39 SkyScan query 09:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.24<-23416 Statuses=0008 0009 09:23:40 Msec=5250 True Az=112.995 Ze=-171.24 Az status=0008 Ze status=0009 09:23:40 Check angles 09:23:40 SkyScan query 09:23:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:23:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:23:41 Message to Master queued w/err=0: serial=83288 error=0 09:23:46 Received message from Master: op=Filter serial=83289 09:23:46 Color wheel filter change from 0 to 0 09:23:46 FLIGetFilterPos err=0 currentPosition=0 09:23:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:46 Filter is already there-color wheel unchanged 09:23:46 Received message from Master: op=Shutter serial=83290 09:23:46 Shutter LASER open 09:23:46 Received message from Camera: op=State serial=83292 09:23:46 GetSingleValue result=40 Value=cccccccc 09:23:46 SkyScan query 09:23:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:23:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:46 Parameters OK 09:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:46 Set A/D data flow result=40 09:23:46 Set A/D channel type result=40 09:23:46 Set A/D encoding result=40 09:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:46 Set channel filter=0.000000e+000 result=40 09:23:46 Config A/D Result=40 09:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:46 Get A/D filter: -9.255963e+061 result=40 09:23:46 Get A/D value=-858993460 result=40 09:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:46 Parameters OK 09:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:46 Set A/D data flow result=40 09:23:46 Set A/D channel type result=40 09:23:46 Set A/D encoding result=40 09:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:46 Set channel filter=0.000000e+000 result=40 09:23:46 Config A/D Result=40 09:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:46 Get A/D filter: -9.255963e+061 result=40 09:23:46 Get A/D value=-858993460 result=40 09:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:46 Aux= 09:23:46 Message to Camera, serial 83292 queued [UTC 2019-3-3 09:23:50] 09:23:55 Received message from Master: op=Shutter serial=83302 09:23:55 Shutter LASER close 09:23:55 Received message from Master: op=PointingHead serial=83306 09:23:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:23:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:23:56 Point started: ret=0 09:23:56 point_skyscan result=0 09:23:56 Check angles 09:23:56 SkyScan query 09:23:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 09:23:57 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 09:23:57 Check angles 09:23:57 SkyScan query 09:23:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.01<-20134 Statuses=0008 0009 09:23:58 Msec=750 True Az=112.995 Ze=-122.01 Az status=0008 Ze status=0009 09:23:58 Check angles 09:23:58 SkyScan query 09:23:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 09:23:58 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 09:23:59 Check angles 09:23:59 SkyScan query 09:23:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 09:23:59 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 09:23:59 Check angles 09:23:59 SkyScan query 09:24:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.275<-15885 Statuses=0008 0009 09:24:00 Msec=3000 True Az=112.995 Ze=-58.275 Az status=0008 Ze status=0009 09:24:00 Check angles 09:24:00 SkyScan query 09:24:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.35<-14490 Statuses=0008 0009 09:24:01 Msec=3750 True Az=112.995 Ze=-37.35 Az status=0008 Ze status=0009 09:24:01 Check angles 09:24:01 SkyScan query 09:24:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.38<-13092 Statuses=0008 0009 09:24:02 Msec=4500 True Az=112.995 Ze=-16.38 Az status=0008 Ze status=0009 09:24:02 Check angles 09:24:02 SkyScan query 09:24:02 SkyScan query done: ret=0 az=112.995<-7533 ze=4.47<-11702 Statuses=0008 0009 09:24:02 Msec=5250 True Az=112.995 Ze=4.47 Az status=0008 Ze status=0009 09:24:02 Check angles 09:24:02 SkyScan query 09:24:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:24:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:24:03 Message to Master queued w/err=0: serial=83306 error=0 09:24:08 Received message from Master: op=Filter serial=83307 09:24:08 Color wheel filter change from 0 to 0 09:24:08 FLIGetFilterPos err=0 currentPosition=0 09:24:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:08 Filter is already there-color wheel unchanged 09:24:08 Received message from Master: op=Shutter serial=83308 09:24:08 Shutter LASER close 09:24:08 Received message from Camera: op=State serial=83310 09:24:08 GetSingleValue result=40 Value=cccccccc 09:24:08 SkyScan query 09:24:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:24:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:09 Parameters OK 09:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:09 Set A/D data flow result=40 09:24:09 Set A/D channel type result=40 09:24:09 Set A/D encoding result=40 09:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:09 Set channel filter=0.000000e+000 result=40 09:24:09 Config A/D Result=40 09:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:09 Get A/D filter: -9.255963e+061 result=40 09:24:09 Get A/D value=-858993460 result=40 09:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:09 Parameters OK 09:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:09 Set A/D data flow result=40 09:24:09 Set A/D channel type result=40 09:24:09 Set A/D encoding result=40 09:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:09 Set channel filter=0.000000e+000 result=40 09:24:09 Config A/D Result=40 09:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:09 Get A/D filter: -9.255963e+061 result=40 09:24:09 Get A/D value=-858993460 result=40 09:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:09 Aux= 09:24:09 Message to Camera, serial 83310 queued 09:24:46 Received message from Master: op=PointingHead serial=83323 09:24:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:24:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:24:46 Point started: ret=0 09:24:46 point_skyscan result=0 09:24:47 Check angles 09:24:47 SkyScan query 09:24:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:24:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:24:47 Message to Master queued w/err=0: serial=83323 error=0 09:24:52 Received message from Master: op=Filter serial=83324 09:24:52 Color wheel filter change from 0 to 0 09:24:52 FLIGetFilterPos err=0 currentPosition=0 09:24:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:52 Filter is already there-color wheel unchanged 09:24:53 Received message from Master: op=Shutter serial=83325 09:24:53 Shutter LASER close 09:24:53 Received message from Camera: op=State serial=83327 09:24:53 GetSingleValue result=40 Value=cccccccc 09:24:53 SkyScan query 09:24:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:24:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:53 Parameters OK 09:24:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:53 Set A/D data flow result=40 09:24:53 Set A/D channel type result=40 09:24:53 Set A/D encoding result=40 09:24:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:53 Set channel filter=0.000000e+000 result=40 09:24:53 Config A/D Result=40 09:24:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:53 Get A/D filter: -9.255963e+061 result=40 09:24:53 Get A/D value=-858993460 result=40 09:24:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:53 Parameters OK 09:24:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:53 Set A/D data flow result=40 09:24:53 Set A/D channel type result=40 09:24:53 Set A/D encoding result=40 09:24:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:53 Set channel filter=0.000000e+000 result=40 09:24:53 Config A/D Result=40 09:24:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:53 Get A/D filter: -9.255963e+061 result=40 09:24:53 Get A/D value=-858993460 result=40 09:24:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:53 Aux= 09:24:53 Message to Camera, serial 83327 queued 09:25:30 Received message from Master: op=PointingHead serial=83340 09:25:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:25:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:25:30 Point started: ret=0 09:25:30 point_skyscan result=0 09:25:31 Check angles 09:25:31 SkyScan query 09:25:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:25:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:25:32 Message to Master queued w/err=0: serial=83340 error=0 09:25:37 Received message from Master: op=Filter serial=83341 09:25:37 Color wheel filter change from 0 to 0 09:25:37 FLIGetFilterPos err=0 currentPosition=0 09:25:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:37 Filter is already there-color wheel unchanged 09:25:37 Received message from Master: op=Shutter serial=83342 09:25:37 Shutter LASER close 09:25:37 Received message from Camera: op=State serial=83344 09:25:37 GetSingleValue result=40 Value=cccccccc 09:25:37 SkyScan query 09:25:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:25:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:38 Parameters OK 09:25:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:38 Set A/D data flow result=40 09:25:38 Set A/D channel type result=40 09:25:38 Set A/D encoding result=40 09:25:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:38 Set channel filter=0.000000e+000 result=40 09:25:38 Config A/D Result=40 09:25:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:38 Get A/D filter: -9.255963e+061 result=40 09:25:38 Get A/D value=-858993460 result=40 09:25:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:38 Parameters OK 09:25:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:38 Set A/D data flow result=40 09:25:38 Set A/D channel type result=40 09:25:38 Set A/D encoding result=40 09:25:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:38 Set channel filter=0.000000e+000 result=40 09:25:38 Config A/D Result=40 09:25:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:38 Get A/D filter: -9.255963e+061 result=40 09:25:38 Get A/D value=-858993460 result=40 09:25:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:38 Aux= 09:25:38 Message to Camera, serial 83344 queued 09:26:14 Received message from Master: op=PointingHead serial=83357 09:26:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:26:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:26:15 Point started: ret=0 09:26:15 point_skyscan result=0 09:26:16 Check angles 09:26:16 SkyScan query 09:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:26:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:26:16 Message to Master queued w/err=0: serial=83357 error=0 09:26:21 Received message from Master: op=Filter serial=83358 09:26:21 Color wheel filter change from 0 to 0 09:26:21 FLIGetFilterPos err=0 currentPosition=0 09:26:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:21 Filter is already there-color wheel unchanged 09:26:21 Received message from Master: op=Shutter serial=83359 09:26:21 Shutter LASER close 09:26:21 Received message from Camera: op=State serial=83361 09:26:21 GetSingleValue result=40 Value=cccccccc 09:26:21 SkyScan query 09:26:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:26:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:22 Parameters OK 09:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:22 Set A/D data flow result=40 09:26:22 Set A/D channel type result=40 09:26:22 Set A/D encoding result=40 09:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:22 Set channel filter=0.000000e+000 result=40 09:26:22 Config A/D Result=40 09:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:22 Get A/D filter: -9.255963e+061 result=40 09:26:22 Get A/D value=-858993460 result=40 09:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:22 Parameters OK 09:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:22 Set A/D data flow result=40 09:26:22 Set A/D channel type result=40 09:26:22 Set A/D encoding result=40 09:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:22 Set channel filter=0.000000e+000 result=40 09:26:22 Config A/D Result=40 09:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:22 Get A/D filter: -9.255963e+061 result=40 09:26:22 Get A/D value=-858993460 result=40 09:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:22 Aux= 09:26:22 Message to Camera, serial 83361 queued 09:26:59 Received message from Master: op=PointingHead serial=83374 09:26:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:26:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:26:59 Point started: ret=0 09:26:59 point_skyscan result=0 09:27:00 Check angles 09:27:00 SkyScan query 09:27:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.52<-13568 Statuses=0008 0009 09:27:00 Msec=0 True Az=112.995 Ze=-23.52 Az status=0008 Ze status=0009 09:27:01 Check angles 09:27:01 SkyScan query 09:27:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 09:27:01 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 09:27:01 Check angles 09:27:01 SkyScan query 09:27:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 09:27:02 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 09:27:02 Check angles 09:27:02 SkyScan query 09:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 09:27:03 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 09:27:03 Check angles 09:27:03 SkyScan query 09:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.355<-19157 Statuses=0008 0009 09:27:03 Msec=3000 True Az=112.995 Ze=-107.355 Az status=0008 Ze status=0009 09:27:04 Check angles 09:27:04 SkyScan query 09:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.295<-20553 Statuses=0008 0009 09:27:04 Msec=3750 True Az=112.995 Ze=-128.295 Az status=0008 Ze status=0009 09:27:04 Check angles 09:27:04 SkyScan query 09:27:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.265<-21951 Statuses=0008 0009 09:27:05 Msec=4500 True Az=112.995 Ze=-149.265 Az status=0008 Ze status=0009 09:27:05 Check angles 09:27:05 SkyScan query 09:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 09:27:06 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 09:27:06 Check angles 09:27:06 SkyScan query 09:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:27:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:27:06 Message to Master queued w/err=0: serial=83374 error=0 09:27:11 Received message from Master: op=Filter serial=83375 09:27:11 Color wheel filter change from 0 to 0 09:27:11 FLIGetFilterPos err=0 currentPosition=0 09:27:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:11 Filter is already there-color wheel unchanged 09:27:12 Received message from Master: op=Shutter serial=83376 09:27:12 Shutter LASER open 09:27:12 Received message from Camera: op=State serial=83378 09:27:12 GetSingleValue result=40 Value=cccccccc 09:27:12 SkyScan query 09:27:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:27:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:12 Parameters OK 09:27:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:12 Set A/D data flow result=40 09:27:12 Set A/D channel type result=40 09:27:12 Set A/D encoding result=40 09:27:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:12 Set channel filter=0.000000e+000 result=40 09:27:12 Config A/D Result=40 09:27:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:12 Get A/D filter: -9.255963e+061 result=40 09:27:12 Get A/D value=-858993460 result=40 09:27:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:12 Parameters OK 09:27:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:12 Set A/D data flow result=40 09:27:12 Set A/D channel type result=40 09:27:12 Set A/D encoding result=40 09:27:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:12 Set channel filter=0.000000e+000 result=40 09:27:12 Config A/D Result=40 09:27:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:12 Get A/D filter: -9.255963e+061 result=40 09:27:12 Get A/D value=-858993460 result=40 09:27:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:12 Aux= 09:27:12 Message to Camera, serial 83378 queued 09:27:20 Received message from Master: op=Shutter serial=83387 09:27:20 Shutter LASER close 09:27:20 Received message from Master: op=PointingHead serial=83391 09:27:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:27:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:27:21 Point started: ret=0 09:27:21 point_skyscan result=0 09:27:22 Check angles 09:27:22 SkyScan query 09:27:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 09:27:22 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 09:27:22 Check angles 09:27:22 SkyScan query 09:27:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 09:27:23 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 09:27:23 Check angles 09:27:23 SkyScan query 09:27:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 09:27:24 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 09:27:24 Check angles 09:27:24 SkyScan query 09:27:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.32<-17288 Statuses=0008 0009 09:27:24 Msec=2250 True Az=112.995 Ze=-79.32 Az status=0008 Ze status=0009 09:27:25 Check angles 09:27:25 SkyScan query 09:27:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.35<-15890 Statuses=0008 0009 09:27:25 Msec=3000 True Az=112.995 Ze=-58.35 Az status=0008 Ze status=0009 09:27:25 Check angles 09:27:25 SkyScan query 09:27:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.44<-14496 Statuses=0008 0009 09:27:26 Msec=3750 True Az=112.995 Ze=-37.44 Az status=0008 Ze status=0009 09:27:26 Check angles 09:27:26 SkyScan query 09:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.455<-13097 Statuses=0008 0009 09:27:27 Msec=4500 True Az=112.995 Ze=-16.455 Az status=0008 Ze status=0009 09:27:27 Check angles 09:27:27 SkyScan query 09:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=4.41<-11706 Statuses=0008 0009 09:27:27 Msec=5250 True Az=112.995 Ze=4.41 Az status=0008 Ze status=0009 09:27:28 Check angles 09:27:28 SkyScan query 09:27:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:27:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:27:28 Message to Master queued w/err=0: serial=83391 error=0 09:27:33 Received message from Master: op=Filter serial=83392 09:27:33 Color wheel filter change from 0 to 0 09:27:33 FLIGetFilterPos err=0 currentPosition=0 09:27:33 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:33 Filter is already there-color wheel unchanged 09:27:33 Received message from Master: op=Shutter serial=83393 09:27:33 Shutter LASER close 09:27:33 Received message from Camera: op=State serial=83395 09:27:33 GetSingleValue result=40 Value=cccccccc 09:27:33 SkyScan query 09:27:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:27:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:34 Parameters OK 09:27:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:34 Set A/D data flow result=40 09:27:34 Set A/D channel type result=40 09:27:34 Set A/D encoding result=40 09:27:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:34 Set channel filter=0.000000e+000 result=40 09:27:34 Config A/D Result=40 09:27:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:34 Get A/D filter: -9.255963e+061 result=40 09:27:34 Get A/D value=-858993460 result=40 09:27:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:34 Parameters OK 09:27:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:34 Set A/D data flow result=40 09:27:34 Set A/D channel type result=40 09:27:34 Set A/D encoding result=40 09:27:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:34 Set channel filter=0.000000e+000 result=40 09:27:34 Config A/D Result=40 09:27:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:34 Get A/D filter: -9.255963e+061 result=40 09:27:34 Get A/D value=-858993460 result=40 09:27:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:34 Aux= 09:27:34 Message to Camera, serial 83395 queued 09:28:11 Received message from Master: op=PointingHead serial=83408 09:28:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:28:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:28:11 Point started: ret=0 09:28:11 point_skyscan result=0 09:28:12 Check angles 09:28:12 SkyScan query 09:28:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:28:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:28:13 Message to Master queued w/err=0: serial=83408 error=0 09:28:18 Received message from Master: op=Filter serial=83409 09:28:18 Color wheel filter change from 0 to 0 09:28:18 FLIGetFilterPos err=0 currentPosition=0 09:28:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:18 Filter is already there-color wheel unchanged 09:28:18 Received message from Master: op=Shutter serial=83410 09:28:18 Shutter LASER close 09:28:18 Received message from Camera: op=State serial=83412 09:28:18 GetSingleValue result=40 Value=cccccccc 09:28:18 SkyScan query 09:28:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:28:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:18 Parameters OK 09:28:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:18 Set A/D data flow result=40 09:28:18 Set A/D channel type result=40 09:28:18 Set A/D encoding result=40 09:28:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:18 Set channel filter=0.000000e+000 result=40 09:28:18 Config A/D Result=40 09:28:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:18 Get A/D filter: -9.255963e+061 result=40 09:28:18 Get A/D value=-858993460 result=40 09:28:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:18 Parameters OK 09:28:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:18 Set A/D data flow result=40 09:28:18 Set A/D channel type result=40 09:28:18 Set A/D encoding result=40 09:28:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:18 Set channel filter=0.000000e+000 result=40 09:28:18 Config A/D Result=40 09:28:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:18 Get A/D filter: -9.255963e+061 result=40 09:28:18 Get A/D value=-858993460 result=40 09:28:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:18 Aux= 09:28:18 Message to Camera, serial 83412 queued 09:28:55 Received message from Master: op=PointingHead serial=83425 09:28:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:28:55 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:28:56 Point started: ret=0 09:28:56 point_skyscan result=0 09:28:56 Check angles 09:28:56 SkyScan query 09:28:57 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 09:28:57 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 09:28:57 Check angles 09:28:57 SkyScan query 09:28:58 SkyScan query done: ret=0 az=153.615<-10241 ze=-6.495<-12433 Statuses=0009 0008 09:28:58 Msec=750 True Az=153.615 Ze=-6.495 Az status=0009 Ze status=0008 09:28:58 Check angles 09:28:58 SkyScan query 09:28:58 SkyScan query done: ret=0 az=170.97<-11398 ze=-6.495<-12433 Statuses=0009 0008 09:28:58 Msec=1500 True Az=170.97 Ze=-6.495 Az status=0009 Ze status=0008 09:28:59 Check angles 09:28:59 SkyScan query 09:28:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:28:59 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:28:59 Message to Master queued w/err=0: serial=83425 error=0 09:29:04 Received message from Master: op=Filter serial=83426 09:29:04 Color wheel filter change from 0 to 0 09:29:04 FLIGetFilterPos err=0 currentPosition=0 09:29:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:04 Filter is already there-color wheel unchanged 09:29:04 Received message from Master: op=Shutter serial=83427 09:29:04 Shutter LASER close 09:29:04 Received message from Camera: op=State serial=83429 09:29:04 GetSingleValue result=40 Value=cccccccc 09:29:04 SkyScan query 09:29:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:29:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:05 Parameters OK 09:29:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:05 Set A/D data flow result=40 09:29:05 Set A/D channel type result=40 09:29:05 Set A/D encoding result=40 09:29:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:05 Set channel filter=0.000000e+000 result=40 09:29:05 Config A/D Result=40 09:29:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:05 Get A/D filter: -9.255963e+061 result=40 09:29:05 Get A/D value=-858993460 result=40 09:29:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:05 Parameters OK 09:29:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:05 Set A/D data flow result=40 09:29:05 Set A/D channel type result=40 09:29:05 Set A/D encoding result=40 09:29:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:05 Set channel filter=0.000000e+000 result=40 09:29:05 Config A/D Result=40 09:29:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:05 Get A/D filter: -9.255963e+061 result=40 09:29:05 Get A/D value=-858993460 result=40 09:29:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:05 Aux= 09:29:05 Message to Camera, serial 83429 queued 09:29:42 Received message from Master: op=PointingHead serial=83442 09:29:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:29:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:29:42 Point started: ret=0 09:29:42 point_skyscan result=0 09:29:43 Check angles 09:29:43 SkyScan query 09:29:43 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 09:29:43 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 09:29:44 Check angles 09:29:44 SkyScan query 09:29:44 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 09:29:44 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 09:29:44 Check angles 09:29:44 SkyScan query 09:29:45 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 09:29:45 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 09:29:45 Check angles 09:29:45 SkyScan query 09:29:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:29:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:29:46 Message to Master queued w/err=0: serial=83442 error=0 09:29:51 Received message from Master: op=Filter serial=83443 09:29:51 Color wheel filter change from 0 to 0 09:29:51 FLIGetFilterPos err=0 currentPosition=0 09:29:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:51 Filter is already there-color wheel unchanged 09:29:51 Received message from Master: op=Shutter serial=83444 09:29:51 Shutter LASER close 09:29:51 Received message from Camera: op=State serial=83446 09:29:51 GetSingleValue result=40 Value=cccccccc 09:29:51 SkyScan query 09:29:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:29:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:51 Parameters OK 09:29:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:51 Set A/D data flow result=40 09:29:51 Set A/D channel type result=40 09:29:51 Set A/D encoding result=40 09:29:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:51 Set channel filter=0.000000e+000 result=40 09:29:51 Config A/D Result=40 09:29:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:51 Get A/D filter: -9.255963e+061 result=40 09:29:51 Get A/D value=-858993460 result=40 09:29:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:51 Parameters OK 09:29:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:51 Set A/D data flow result=40 09:29:51 Set A/D channel type result=40 09:29:51 Set A/D encoding result=40 09:29:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:51 Set channel filter=0.000000e+000 result=40 09:29:51 Config A/D Result=40 09:29:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:51 Get A/D filter: -9.255963e+061 result=40 09:29:51 Get A/D value=-858993460 result=40 09:29:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:51 Aux= 09:29:51 Message to Camera, serial 83446 queued 09:30:28 Received message from Master: op=PointingHead serial=83459 09:30:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:30:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:30:29 Point started: ret=0 09:30:29 point_skyscan result=0 09:30:29 Check angles 09:30:29 SkyScan query 09:30:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 09:30:30 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 09:30:30 Check angles 09:30:30 SkyScan query 09:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 09:30:31 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 09:30:31 Check angles 09:30:31 SkyScan query 09:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 09:30:31 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 09:30:32 Check angles 09:30:32 SkyScan query 09:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 09:30:32 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 09:30:32 Check angles 09:30:32 SkyScan query 09:30:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.715<-19181 Statuses=0008 0009 09:30:33 Msec=3000 True Az=112.995 Ze=-107.715 Az status=0008 Ze status=0009 09:30:33 Check angles 09:30:33 SkyScan query 09:30:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 09:30:34 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 09:30:34 Check angles 09:30:34 SkyScan query 09:30:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.045<-22003 Statuses=0008 0009 09:30:34 Msec=4500 True Az=112.995 Ze=-150.045 Az status=0008 Ze status=0009 09:30:35 Check angles 09:30:35 SkyScan query 09:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 09:30:35 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 09:30:35 Check angles 09:30:35 SkyScan query 09:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:30:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:30:36 Message to Master queued w/err=0: serial=83459 error=0 09:30:41 Received message from Master: op=Filter serial=83460 09:30:41 Color wheel filter change from 0 to 0 09:30:41 FLIGetFilterPos err=0 currentPosition=0 09:30:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:41 Filter is already there-color wheel unchanged 09:30:41 Received message from Master: op=Shutter serial=83461 09:30:41 Shutter LASER open 09:30:41 Received message from Camera: op=State serial=83463 09:30:41 GetSingleValue result=40 Value=cccccccc 09:30:41 SkyScan query 09:30:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:30:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:42 Parameters OK 09:30:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:42 Set A/D data flow result=40 09:30:42 Set A/D channel type result=40 09:30:42 Set A/D encoding result=40 09:30:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:42 Set channel filter=0.000000e+000 result=40 09:30:42 Config A/D Result=40 09:30:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:42 Get A/D filter: -9.255963e+061 result=40 09:30:42 Get A/D value=-858993460 result=40 09:30:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:42 Parameters OK 09:30:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:42 Set A/D data flow result=40 09:30:42 Set A/D channel type result=40 09:30:42 Set A/D encoding result=40 09:30:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:42 Set channel filter=0.000000e+000 result=40 09:30:42 Config A/D Result=40 09:30:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:42 Get A/D filter: -9.255963e+061 result=40 09:30:42 Get A/D value=-858993460 result=40 09:30:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:42 Aux= 09:30:42 Message to Camera, serial 83463 queued 09:30:50 Received message from Master: op=Shutter serial=83473 09:30:50 Shutter LASER close 09:30:51 Received message from Master: op=PointingHead serial=83477 09:30:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:30:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:30:51 Point started: ret=0 09:30:51 point_skyscan result=0 09:30:52 Check angles 09:30:52 SkyScan query 09:30:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 09:30:52 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 09:30:53 Check angles 09:30:53 SkyScan query 09:30:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.43<-20162 Statuses=0008 0009 09:30:53 Msec=750 True Az=112.995 Ze=-122.43 Az status=0008 Ze status=0009 09:30:53 Check angles 09:30:53 SkyScan query 09:30:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 09:30:54 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 09:30:54 Check angles 09:30:54 SkyScan query 09:30:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.4<-17360 Statuses=0008 0009 09:30:55 Msec=2250 True Az=112.995 Ze=-80.4 Az status=0008 Ze status=0009 09:30:55 Check angles 09:30:55 SkyScan query 09:30:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.565<-15971 Statuses=0008 0009 09:30:55 Msec=3000 True Az=112.995 Ze=-59.565 Az status=0008 Ze status=0009 09:30:56 Check angles 09:30:56 SkyScan query 09:30:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.61<-14574 Statuses=0008 0009 09:30:56 Msec=3750 True Az=112.995 Ze=-38.61 Az status=0008 Ze status=0009 09:30:56 Check angles 09:30:56 SkyScan query 09:30:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.655<-13177 Statuses=0008 0009 09:30:57 Msec=4500 True Az=112.995 Ze=-17.655 Az status=0008 Ze status=0009 09:30:57 Check angles 09:30:57 SkyScan query 09:30:58 SkyScan query done: ret=0 az=112.995<-7533 ze=3.3<-11780 Statuses=0008 0009 09:30:58 Msec=5250 True Az=112.995 Ze=3.3 Az status=0008 Ze status=0009 09:30:58 Check angles 09:30:58 SkyScan query 09:30:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:30:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:30:58 Message to Master queued w/err=0: serial=83477 error=0 09:31:03 Received message from Master: op=Filter serial=83478 09:31:03 Color wheel filter change from 0 to 0 09:31:03 FLIGetFilterPos err=0 currentPosition=0 09:31:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:03 Filter is already there-color wheel unchanged 09:31:04 Received message from Master: op=Shutter serial=83479 09:31:04 Shutter LASER close 09:31:04 Received message from Camera: op=State serial=83481 09:31:04 GetSingleValue result=40 Value=cccccccc 09:31:04 SkyScan query 09:31:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:31:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:04 Parameters OK 09:31:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:04 Set A/D data flow result=40 09:31:04 Set A/D channel type result=40 09:31:04 Set A/D encoding result=40 09:31:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:04 Set channel filter=0.000000e+000 result=40 09:31:04 Config A/D Result=40 09:31:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:04 Get A/D filter: -9.255963e+061 result=40 09:31:04 Get A/D value=-858993460 result=40 09:31:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:04 Parameters OK 09:31:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:04 Set A/D data flow result=40 09:31:04 Set A/D channel type result=40 09:31:04 Set A/D encoding result=40 09:31:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:04 Set channel filter=0.000000e+000 result=40 09:31:04 Config A/D Result=40 09:31:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:04 Get A/D filter: -9.255963e+061 result=40 09:31:04 Get A/D value=-858993460 result=40 09:31:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:04 Aux= 09:31:04 Message to Camera, serial 83481 queued 09:31:41 Received message from Master: op=PointingHead serial=83494 09:31:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:31:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:31:42 Point started: ret=0 09:31:42 point_skyscan result=0 09:31:42 Check angles 09:31:42 SkyScan query 09:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:31:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:31:43 Message to Master queued w/err=0: serial=83494 error=0 09:31:48 Received message from Master: op=Filter serial=83495 09:31:48 Color wheel filter change from 0 to 0 09:31:48 FLIGetFilterPos err=0 currentPosition=0 09:31:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:48 Filter is already there-color wheel unchanged 09:31:48 Received message from Master: op=Shutter serial=83496 09:31:48 Shutter LASER close 09:31:48 Received message from Camera: op=State serial=83498 09:31:48 GetSingleValue result=40 Value=cccccccc 09:31:48 SkyScan query 09:31:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:31:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:49 Parameters OK 09:31:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:49 Set A/D data flow result=40 09:31:49 Set A/D channel type result=40 09:31:49 Set A/D encoding result=40 09:31:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:49 Set channel filter=0.000000e+000 result=40 09:31:49 Config A/D Result=40 09:31:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:49 Get A/D filter: -9.255963e+061 result=40 09:31:49 Get A/D value=-858993460 result=40 09:31:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:49 Parameters OK 09:31:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:49 Set A/D data flow result=40 09:31:49 Set A/D channel type result=40 09:31:49 Set A/D encoding result=40 09:31:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:49 Set channel filter=0.000000e+000 result=40 09:31:49 Config A/D Result=40 09:31:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:49 Get A/D filter: -9.255963e+061 result=40 09:31:49 Get A/D value=-858993460 result=40 09:31:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:49 Aux= 09:31:49 Message to Camera, serial 83498 queued 09:32:26 Received message from Master: op=PointingHead serial=83511 09:32:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:32:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:32:26 Point started: ret=0 09:32:26 point_skyscan result=0 09:32:27 Check angles 09:32:27 SkyScan query 09:32:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:32:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:32:27 Message to Master queued w/err=0: serial=83511 error=0 09:32:32 Received message from Master: op=Filter serial=83512 09:32:32 Color wheel filter change from 0 to 0 09:32:32 FLIGetFilterPos err=0 currentPosition=0 09:32:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:32 Filter is already there-color wheel unchanged 09:32:32 Received message from Master: op=Shutter serial=83513 09:32:32 Shutter LASER close 09:32:32 Received message from Camera: op=State serial=83515 09:32:32 GetSingleValue result=40 Value=cccccccc 09:32:32 SkyScan query 09:32:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:32:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:33 Parameters OK 09:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:33 Set A/D data flow result=40 09:32:33 Set A/D channel type result=40 09:32:33 Set A/D encoding result=40 09:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:33 Set channel filter=0.000000e+000 result=40 09:32:33 Config A/D Result=40 09:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:33 Get A/D filter: -9.255963e+061 result=40 09:32:33 Get A/D value=-858993460 result=40 09:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:33 Parameters OK 09:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:33 Set A/D data flow result=40 09:32:33 Set A/D channel type result=40 09:32:33 Set A/D encoding result=40 09:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:33 Set channel filter=0.000000e+000 result=40 09:32:33 Config A/D Result=40 09:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:33 Get A/D filter: -9.255963e+061 result=40 09:32:33 Get A/D value=-858993460 result=40 09:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:33 Aux= 09:32:33 Message to Camera, serial 83515 queued 09:33:10 Received message from Master: op=PointingHead serial=83528 09:33:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:33:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:33:10 Point started: ret=0 09:33:10 point_skyscan result=0 09:33:11 Check angles 09:33:11 SkyScan query 09:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:33:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:33:12 Message to Master queued w/err=0: serial=83528 error=0 09:33:17 Received message from Master: op=Filter serial=83529 09:33:17 Color wheel filter change from 0 to 0 09:33:17 FLIGetFilterPos err=0 currentPosition=0 09:33:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:17 Filter is already there-color wheel unchanged 09:33:17 Received message from Master: op=Shutter serial=83530 09:33:17 Shutter LASER close 09:33:17 Received message from Camera: op=State serial=83532 09:33:17 GetSingleValue result=40 Value=cccccccc 09:33:17 SkyScan query 09:33:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:33:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:17 Parameters OK 09:33:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:17 Set A/D data flow result=40 09:33:17 Set A/D channel type result=40 09:33:17 Set A/D encoding result=40 09:33:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:17 Set channel filter=0.000000e+000 result=40 09:33:17 Config A/D Result=40 09:33:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:17 Get A/D filter: -9.255963e+061 result=40 09:33:17 Get A/D value=-858993460 result=40 09:33:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:17 Parameters OK 09:33:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:17 Set A/D data flow result=40 09:33:17 Set A/D channel type result=40 09:33:17 Set A/D encoding result=40 09:33:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:17 Set channel filter=0.000000e+000 result=40 09:33:17 Config A/D Result=40 09:33:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:17 Get A/D filter: -9.255963e+061 result=40 09:33:17 Get A/D value=-858993460 result=40 09:33:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:17 Aux= 09:33:17 Message to Camera, serial 83532 queued 09:33:38 Received message from Master: op=Identify serial=83533 09:33:54 Received message from Master: op=PointingHead serial=83548 09:33:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:33:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:33:55 Point started: ret=0 09:33:55 point_skyscan result=0 09:33:55 Check angles 09:33:55 SkyScan query 09:33:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.88<-13592 Statuses=0008 0009 09:33:56 Msec=0 True Az=112.995 Ze=-23.88 Az status=0008 Ze status=0009 09:33:56 Check angles 09:33:56 SkyScan query 09:33:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.24<-15016 Statuses=0008 0009 09:33:57 Msec=750 True Az=112.995 Ze=-45.24 Az status=0008 Ze status=0009 09:33:57 Check angles 09:33:57 SkyScan query 09:33:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.18<-16412 Statuses=0008 0009 09:33:57 Msec=1500 True Az=112.995 Ze=-66.18 Az status=0008 Ze status=0009 09:33:58 Check angles 09:33:58 SkyScan query 09:33:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.15<-17810 Statuses=0008 0009 09:33:58 Msec=2250 True Az=112.995 Ze=-87.15 Az status=0008 Ze status=0009 09:33:58 Check angles 09:33:58 SkyScan query 09:33:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 09:33:59 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 09:33:59 Check angles 09:33:59 SkyScan query 09:34:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.045<-20603 Statuses=0008 0009 09:34:00 Msec=3750 True Az=112.995 Ze=-129.045 Az status=0008 Ze status=0009 09:34:00 Check angles 09:34:00 SkyScan query 09:34:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-150<-22000 Statuses=0008 0009 09:34:00 Msec=4500 True Az=112.995 Ze=-150 Az status=0008 Ze status=0009 09:34:01 Check angles 09:34:01 SkyScan query 09:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0008 0009 09:34:01 Msec=5250 True Az=112.995 Ze=-170.865 Az status=0008 Ze status=0009 09:34:01 Check angles 09:34:01 SkyScan query 09:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:34:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:34:02 Message to Master queued w/err=0: serial=83548 error=0 09:34:07 Received message from Master: op=Filter serial=83549 09:34:07 Color wheel filter change from 0 to 0 09:34:07 FLIGetFilterPos err=0 currentPosition=0 09:34:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:07 Filter is already there-color wheel unchanged 09:34:07 Received message from Master: op=Shutter serial=83550 09:34:07 Shutter LASER open 09:34:07 Received message from Camera: op=State serial=83552 09:34:07 GetSingleValue result=40 Value=cccccccc 09:34:07 SkyScan query 09:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:34:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:08 Parameters OK 09:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:08 Set A/D data flow result=40 09:34:08 Set A/D channel type result=40 09:34:08 Set A/D encoding result=40 09:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:08 Set channel filter=0.000000e+000 result=40 09:34:08 Config A/D Result=40 09:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:08 Get A/D filter: -9.255963e+061 result=40 09:34:08 Get A/D value=-858993460 result=40 09:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:08 Parameters OK 09:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:08 Set A/D data flow result=40 09:34:08 Set A/D channel type result=40 09:34:08 Set A/D encoding result=40 09:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:08 Set channel filter=0.000000e+000 result=40 09:34:08 Config A/D Result=40 09:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:08 Get A/D filter: -9.255963e+061 result=40 09:34:08 Get A/D value=-858993460 result=40 09:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:08 Aux= 09:34:08 Message to Camera, serial 83552 queued 09:34:16 Received message from Master: op=Shutter serial=83562 09:34:16 Shutter LASER close 09:34:17 Received message from Master: op=PointingHead serial=83566 09:34:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:34:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:34:17 Point started: ret=0 09:34:17 point_skyscan result=0 09:34:18 Check angles 09:34:18 SkyScan query 09:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 09:34:18 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 [UTC 2019-3-3 09:34:19] 09:34:19 Check angles 09:34:19 SkyScan query 09:34:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-120.675<-20045 Statuses=0008 0009 09:34:19 Msec=750 True Az=112.995 Ze=-120.675 Az status=0008 Ze status=0009 09:34:19 Check angles 09:34:19 SkyScan query 09:34:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 09:34:20 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 09:34:20 Check angles 09:34:20 SkyScan query 09:34:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 09:34:21 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 09:34:21 Check angles 09:34:21 SkyScan query 09:34:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.695<-15913 Statuses=0008 0009 09:34:21 Msec=3000 True Az=112.995 Ze=-58.695 Az status=0008 Ze status=0009 09:34:22 Check angles 09:34:22 SkyScan query 09:34:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 09:34:22 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 09:34:22 Check angles 09:34:22 SkyScan query 09:34:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.77<-13118 Statuses=0008 0009 09:34:23 Msec=4500 True Az=112.995 Ze=-16.77 Az status=0008 Ze status=0009 09:34:23 Check angles 09:34:23 SkyScan query 09:34:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.155<-11723 Statuses=0008 0009 09:34:24 Msec=5250 True Az=112.995 Ze=4.155 Az status=0008 Ze status=0009 09:34:24 Check angles 09:34:24 SkyScan query 09:34:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:34:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:34:24 Message to Master queued w/err=0: serial=83566 error=0 09:34:29 Received message from Master: op=Filter serial=83567 09:34:29 Color wheel filter change from 0 to 0 09:34:29 FLIGetFilterPos err=0 currentPosition=0 09:34:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:29 Filter is already there-color wheel unchanged 09:34:30 Received message from Master: op=Shutter serial=83568 09:34:30 Shutter LASER close 09:34:30 Received message from Camera: op=State serial=83570 09:34:30 GetSingleValue result=40 Value=cccccccc 09:34:30 SkyScan query 09:34:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:34:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:30 Parameters OK 09:34:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:30 Set A/D data flow result=40 09:34:30 Set A/D channel type result=40 09:34:30 Set A/D encoding result=40 09:34:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:30 Set channel filter=0.000000e+000 result=40 09:34:30 Config A/D Result=40 09:34:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:30 Get A/D filter: -9.255963e+061 result=40 09:34:30 Get A/D value=-858993460 result=40 09:34:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:30 Parameters OK 09:34:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:30 Set A/D data flow result=40 09:34:30 Set A/D channel type result=40 09:34:30 Set A/D encoding result=40 09:34:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:30 Set channel filter=0.000000e+000 result=40 09:34:30 Config A/D Result=40 09:34:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:30 Get A/D filter: -9.255963e+061 result=40 09:34:30 Get A/D value=-858993460 result=40 09:34:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:30 Aux= 09:34:30 Message to Camera, serial 83570 queued 09:35:07 Received message from Master: op=PointingHead serial=83583 09:35:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:35:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:35:08 Point started: ret=0 09:35:08 point_skyscan result=0 09:35:08 Check angles 09:35:08 SkyScan query 09:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:35:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:35:09 Message to Master queued w/err=0: serial=83583 error=0 09:35:14 Received message from Master: op=Filter serial=83584 09:35:14 Color wheel filter change from 0 to 0 09:35:14 FLIGetFilterPos err=0 currentPosition=0 09:35:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:14 Filter is already there-color wheel unchanged 09:35:14 Received message from Master: op=Shutter serial=83585 09:35:14 Shutter LASER close 09:35:14 Received message from Camera: op=State serial=83587 09:35:14 GetSingleValue result=40 Value=cccccccc 09:35:14 SkyScan query 09:35:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:35:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:15 Parameters OK 09:35:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:15 Set A/D data flow result=40 09:35:15 Set A/D channel type result=40 09:35:15 Set A/D encoding result=40 09:35:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:15 Set channel filter=0.000000e+000 result=40 09:35:15 Config A/D Result=40 09:35:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:15 Get A/D filter: -9.255963e+061 result=40 09:35:15 Get A/D value=-858993460 result=40 09:35:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:15 Parameters OK 09:35:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:15 Set A/D data flow result=40 09:35:15 Set A/D channel type result=40 09:35:15 Set A/D encoding result=40 09:35:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:15 Set channel filter=0.000000e+000 result=40 09:35:15 Config A/D Result=40 09:35:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:15 Get A/D filter: -9.255963e+061 result=40 09:35:15 Get A/D value=-858993460 result=40 09:35:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:15 Aux= 09:35:15 Message to Camera, serial 83587 queued 09:35:52 Received message from Master: op=PointingHead serial=83600 09:35:52 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:35:52 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:35:52 Point started: ret=0 09:35:52 point_skyscan result=0 09:35:53 Check angles 09:35:53 SkyScan query 09:35:53 SkyScan query done: ret=0 az=135.885<-9059 ze=-6.51<-12434 Statuses=0009 0008 09:35:53 Msec=0 True Az=135.885 Ze=-6.51 Az status=0009 Ze status=0008 09:35:53 Check angles 09:35:53 SkyScan query 09:35:54 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.495<-12433 Statuses=0009 0008 09:35:54 Msec=750 True Az=153.795 Ze=-6.495 Az status=0009 Ze status=0008 09:35:54 Check angles 09:35:54 SkyScan query 09:35:55 SkyScan query done: ret=0 az=171.3<-11420 ze=-6.495<-12433 Statuses=0009 0008 09:35:55 Msec=1500 True Az=171.3 Ze=-6.495 Az status=0009 Ze status=0008 09:35:55 Check angles 09:35:55 SkyScan query 09:35:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:35:56 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:35:56 Message to Master queued w/err=0: serial=83600 error=0 09:36:01 Received message from Master: op=Filter serial=83601 09:36:01 Color wheel filter change from 0 to 0 09:36:01 FLIGetFilterPos err=0 currentPosition=0 09:36:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:01 Filter is already there-color wheel unchanged 09:36:01 Received message from Master: op=Shutter serial=83602 09:36:01 Shutter LASER close 09:36:01 Received message from Camera: op=State serial=83604 09:36:01 GetSingleValue result=40 Value=cccccccc 09:36:01 SkyScan query 09:36:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:36:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:01 Parameters OK 09:36:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:01 Set A/D data flow result=40 09:36:01 Set A/D channel type result=40 09:36:01 Set A/D encoding result=40 09:36:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:01 Set channel filter=0.000000e+000 result=40 09:36:01 Config A/D Result=40 09:36:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:01 Get A/D filter: -9.255963e+061 result=40 09:36:01 Get A/D value=-858993460 result=40 09:36:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:01 Parameters OK 09:36:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:01 Set A/D data flow result=40 09:36:01 Set A/D channel type result=40 09:36:01 Set A/D encoding result=40 09:36:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:01 Set channel filter=0.000000e+000 result=40 09:36:01 Config A/D Result=40 09:36:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:01 Get A/D filter: -9.255963e+061 result=40 09:36:01 Get A/D value=-858993460 result=40 09:36:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:01 Aux= 09:36:01 Message to Camera, serial 83604 queued 09:36:38 Received message from Master: op=PointingHead serial=83617 09:36:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:36:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:36:39 Point started: ret=0 09:36:39 point_skyscan result=0 09:36:39 Check angles 09:36:39 SkyScan query 09:36:40 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 09:36:40 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 09:36:40 Check angles 09:36:40 SkyScan query 09:36:41 SkyScan query done: ret=0 az=135.075<-9005 ze=6.495<-11567 Statuses=0009 0008 09:36:41 Msec=750 True Az=135.075 Ze=6.495 Az status=0009 Ze status=0008 09:36:41 Check angles 09:36:41 SkyScan query 09:36:41 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 09:36:41 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 09:36:42 Check angles 09:36:42 SkyScan query 09:36:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:36:42 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:36:42 Message to Master queued w/err=0: serial=83617 error=0 09:36:47 Received message from Master: op=Filter serial=83618 09:36:47 Color wheel filter change from 0 to 0 09:36:47 FLIGetFilterPos err=0 currentPosition=0 09:36:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:47 Filter is already there-color wheel unchanged 09:36:47 Received message from Master: op=Shutter serial=83619 09:36:47 Shutter LASER close 09:36:47 Received message from Camera: op=State serial=83621 09:36:47 GetSingleValue result=40 Value=cccccccc 09:36:47 SkyScan query 09:36:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:36:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:48 Parameters OK 09:36:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:48 Set A/D data flow result=40 09:36:48 Set A/D channel type result=40 09:36:48 Set A/D encoding result=40 09:36:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:48 Set channel filter=0.000000e+000 result=40 09:36:48 Config A/D Result=40 09:36:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:48 Get A/D filter: -9.255963e+061 result=40 09:36:48 Get A/D value=-858993460 result=40 09:36:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:48 Parameters OK 09:36:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:48 Set A/D data flow result=40 09:36:48 Set A/D channel type result=40 09:36:48 Set A/D encoding result=40 09:36:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:48 Set channel filter=0.000000e+000 result=40 09:36:48 Config A/D Result=40 09:36:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:48 Get A/D filter: -9.255963e+061 result=40 09:36:48 Get A/D value=-858993460 result=40 09:36:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:48 Aux= 09:36:48 Message to Camera, serial 83621 queued 09:37:25 Received message from Master: op=PointingHead serial=83634 09:37:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:37:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:37:25 Point started: ret=0 09:37:25 point_skyscan result=0 09:37:26 Check angles 09:37:26 SkyScan query 09:37:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 09:37:26 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 09:37:27 Check angles 09:37:27 SkyScan query 09:37:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 09:37:27 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 09:37:27 Check angles 09:37:27 SkyScan query 09:37:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 09:37:28 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 09:37:28 Check angles 09:37:28 SkyScan query 09:37:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 09:37:29 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 09:37:29 Check angles 09:37:29 SkyScan query 09:37:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.745<-19183 Statuses=0008 0009 09:37:29 Msec=3000 True Az=112.995 Ze=-107.745 Az status=0008 Ze status=0009 09:37:30 Check angles 09:37:30 SkyScan query 09:37:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 09:37:30 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 09:37:30 Check angles 09:37:30 SkyScan query 09:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 09:37:31 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 09:37:31 Check angles 09:37:31 SkyScan query 09:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.58<-23372 Statuses=0008 0009 09:37:32 Msec=5250 True Az=112.995 Ze=-170.58 Az status=0008 Ze status=0009 09:37:32 Check angles 09:37:32 SkyScan query 09:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:37:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:37:32 Message to Master queued w/err=0: serial=83634 error=0 09:37:37 Received message from Master: op=Filter serial=83635 09:37:37 Color wheel filter change from 0 to 0 09:37:37 FLIGetFilterPos err=0 currentPosition=0 09:37:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:37 Filter is already there-color wheel unchanged 09:37:38 Received message from Master: op=Shutter serial=83636 09:37:38 Shutter LASER open 09:37:38 Received message from Camera: op=State serial=83638 09:37:38 GetSingleValue result=40 Value=cccccccc 09:37:38 SkyScan query 09:37:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:37:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:38 Parameters OK 09:37:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:38 Set A/D data flow result=40 09:37:38 Set A/D channel type result=40 09:37:38 Set A/D encoding result=40 09:37:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:38 Set channel filter=0.000000e+000 result=40 09:37:38 Config A/D Result=40 09:37:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:38 Get A/D filter: -9.255963e+061 result=40 09:37:38 Get A/D value=-858993460 result=40 09:37:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:38 Parameters OK 09:37:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:38 Set A/D data flow result=40 09:37:38 Set A/D channel type result=40 09:37:38 Set A/D encoding result=40 09:37:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:38 Set channel filter=0.000000e+000 result=40 09:37:38 Config A/D Result=40 09:37:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:38 Get A/D filter: -9.255963e+061 result=40 09:37:38 Get A/D value=-858993460 result=40 09:37:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:38 Aux= 09:37:38 Message to Camera, serial 83638 queued 09:37:47 Received message from Master: op=Shutter serial=83648 09:37:47 Shutter LASER close 09:37:47 Received message from Master: op=PointingHead serial=83652 09:37:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:37:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:37:48 Point started: ret=0 09:37:48 point_skyscan result=0 09:37:48 Check angles 09:37:48 SkyScan query 09:37:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 09:37:49 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 09:37:49 Check angles 09:37:49 SkyScan query 09:37:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 09:37:50 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 09:37:50 Check angles 09:37:50 SkyScan query 09:37:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.44<-18696 Statuses=0008 0009 09:37:50 Msec=1500 True Az=112.995 Ze=-100.44 Az status=0008 Ze status=0009 09:37:51 Check angles 09:37:51 SkyScan query 09:37:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.47<-17298 Statuses=0008 0009 09:37:51 Msec=2250 True Az=112.995 Ze=-79.47 Az status=0008 Ze status=0009 09:37:51 Check angles 09:37:51 SkyScan query 09:37:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.065<-15871 Statuses=0008 0009 09:37:52 Msec=3000 True Az=112.995 Ze=-58.065 Az status=0008 Ze status=0009 09:37:52 Check angles 09:37:52 SkyScan query 09:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.14<-14476 Statuses=0008 0009 09:37:53 Msec=3750 True Az=112.995 Ze=-37.14 Az status=0008 Ze status=0009 09:37:53 Check angles 09:37:53 SkyScan query 09:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.17<-13078 Statuses=0008 0009 09:37:53 Msec=4500 True Az=112.995 Ze=-16.17 Az status=0008 Ze status=0009 09:37:54 Check angles 09:37:54 SkyScan query 09:37:54 SkyScan query done: ret=0 az=112.995<-7533 ze=4.95<-11670 Statuses=0008 0009 09:37:54 Msec=5250 True Az=112.995 Ze=4.95 Az status=0008 Ze status=0009 09:37:54 Check angles 09:37:54 SkyScan query 09:37:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:37:55 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:37:55 Message to Master queued w/err=0: serial=83652 error=0 09:38:00 Received message from Master: op=Filter serial=83653 09:38:00 Color wheel filter change from 0 to 0 09:38:00 FLIGetFilterPos err=0 currentPosition=0 09:38:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:00 Filter is already there-color wheel unchanged 09:38:00 Received message from Master: op=Shutter serial=83654 09:38:00 Shutter LASER close 09:38:00 Received message from Camera: op=State serial=83656 09:38:00 GetSingleValue result=40 Value=cccccccc 09:38:00 SkyScan query 09:38:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:38:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:01 Parameters OK 09:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:01 Set A/D data flow result=40 09:38:01 Set A/D channel type result=40 09:38:01 Set A/D encoding result=40 09:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:01 Set channel filter=0.000000e+000 result=40 09:38:01 Config A/D Result=40 09:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:01 Get A/D filter: -9.255963e+061 result=40 09:38:01 Get A/D value=-858993460 result=40 09:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:01 Parameters OK 09:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:01 Set A/D data flow result=40 09:38:01 Set A/D channel type result=40 09:38:01 Set A/D encoding result=40 09:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:01 Set channel filter=0.000000e+000 result=40 09:38:01 Config A/D Result=40 09:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:01 Get A/D filter: -9.255963e+061 result=40 09:38:01 Get A/D value=-858993460 result=40 09:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:01 Aux= 09:38:01 Message to Camera, serial 83656 queued 09:38:38 Received message from Master: op=PointingHead serial=83669 09:38:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:38:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:38:38 Point started: ret=0 09:38:38 point_skyscan result=0 09:38:39 Check angles 09:38:39 SkyScan query 09:38:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:38:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:38:39 Message to Master queued w/err=0: serial=83669 error=0 09:38:44 Received message from Master: op=Filter serial=83670 09:38:44 Color wheel filter change from 0 to 0 09:38:44 FLIGetFilterPos err=0 currentPosition=0 09:38:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:44 Filter is already there-color wheel unchanged 09:38:45 Received message from Master: op=Shutter serial=83671 09:38:45 Shutter LASER close 09:38:45 Received message from Camera: op=State serial=83673 09:38:45 GetSingleValue result=40 Value=cccccccc 09:38:45 SkyScan query 09:38:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:38:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:45 Parameters OK 09:38:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:45 Set A/D data flow result=40 09:38:45 Set A/D channel type result=40 09:38:45 Set A/D encoding result=40 09:38:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:45 Set channel filter=0.000000e+000 result=40 09:38:45 Config A/D Result=40 09:38:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:45 Get A/D filter: -9.255963e+061 result=40 09:38:45 Get A/D value=-858993460 result=40 09:38:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:45 Parameters OK 09:38:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:45 Set A/D data flow result=40 09:38:45 Set A/D channel type result=40 09:38:45 Set A/D encoding result=40 09:38:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:45 Set channel filter=0.000000e+000 result=40 09:38:45 Config A/D Result=40 09:38:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:45 Get A/D filter: -9.255963e+061 result=40 09:38:45 Get A/D value=-858993460 result=40 09:38:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:45 Aux= 09:38:45 Message to Camera, serial 83673 queued 09:39:22 Received message from Master: op=PointingHead serial=83686 09:39:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:39:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:39:22 Point started: ret=0 09:39:22 point_skyscan result=0 09:39:23 Check angles 09:39:23 SkyScan query 09:39:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:39:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:39:24 Message to Master queued w/err=0: serial=83686 error=0 09:39:29 Received message from Master: op=Filter serial=83687 09:39:29 Color wheel filter change from 0 to 0 09:39:29 FLIGetFilterPos err=0 currentPosition=0 09:39:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:29 Filter is already there-color wheel unchanged 09:39:29 Received message from Master: op=Shutter serial=83688 09:39:29 Shutter LASER close 09:39:29 Received message from Camera: op=State serial=83690 09:39:29 GetSingleValue result=40 Value=cccccccc 09:39:29 SkyScan query 09:39:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:39:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:30 Parameters OK 09:39:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:30 Set A/D data flow result=40 09:39:30 Set A/D channel type result=40 09:39:30 Set A/D encoding result=40 09:39:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:30 Set channel filter=0.000000e+000 result=40 09:39:30 Config A/D Result=40 09:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:30 Get A/D filter: -9.255963e+061 result=40 09:39:30 Get A/D value=-858993460 result=40 09:39:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:30 Parameters OK 09:39:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:30 Set A/D data flow result=40 09:39:30 Set A/D channel type result=40 09:39:30 Set A/D encoding result=40 09:39:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:30 Set channel filter=0.000000e+000 result=40 09:39:30 Config A/D Result=40 09:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:30 Get A/D filter: -9.255963e+061 result=40 09:39:30 Get A/D value=-858993460 result=40 09:39:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:30 Aux= 09:39:30 Message to Camera, serial 83690 queued 09:40:06 Received message from Master: op=PointingHead serial=83703 09:40:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:40:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:40:07 Point started: ret=0 09:40:07 point_skyscan result=0 09:40:07 Check angles 09:40:07 SkyScan query 09:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:40:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:40:08 Message to Master queued w/err=0: serial=83703 error=0 09:40:13 Received message from Master: op=Filter serial=83704 09:40:13 Color wheel filter change from 0 to 0 09:40:13 FLIGetFilterPos err=0 currentPosition=0 09:40:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:13 Filter is already there-color wheel unchanged 09:40:13 Received message from Master: op=Shutter serial=83705 09:40:13 Shutter LASER close 09:40:13 Received message from Camera: op=State serial=83707 09:40:13 GetSingleValue result=40 Value=cccccccc 09:40:13 SkyScan query 09:40:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:40:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:14 Parameters OK 09:40:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:14 Set A/D data flow result=40 09:40:14 Set A/D channel type result=40 09:40:14 Set A/D encoding result=40 09:40:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:14 Set channel filter=0.000000e+000 result=40 09:40:14 Config A/D Result=40 09:40:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:14 Get A/D filter: -9.255963e+061 result=40 09:40:14 Get A/D value=-858993460 result=40 09:40:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:14 Parameters OK 09:40:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:14 Set A/D data flow result=40 09:40:14 Set A/D channel type result=40 09:40:14 Set A/D encoding result=40 09:40:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:14 Set channel filter=0.000000e+000 result=40 09:40:14 Config A/D Result=40 09:40:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:14 Get A/D filter: -9.255963e+061 result=40 09:40:14 Get A/D value=-858993460 result=40 09:40:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:14 Aux= 09:40:14 Message to Camera, serial 83707 queued 09:40:51 Received message from Master: op=PointingHead serial=83720 09:40:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:40:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:40:51 Point started: ret=0 09:40:51 point_skyscan result=0 09:40:52 Check angles 09:40:52 SkyScan query 09:40:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 09:40:52 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 09:40:52 Check angles 09:40:52 SkyScan query 09:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 09:40:53 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 09:40:53 Check angles 09:40:53 SkyScan query 09:40:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.175<-16345 Statuses=0008 0009 09:40:54 Msec=1500 True Az=112.995 Ze=-65.175 Az status=0008 Ze status=0009 09:40:54 Check angles 09:40:54 SkyScan query 09:40:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.13<-17742 Statuses=0008 0009 09:40:55 Msec=2250 True Az=112.995 Ze=-86.13 Az status=0008 Ze status=0009 09:40:55 Check angles 09:40:55 SkyScan query 09:40:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.085<-19139 Statuses=0008 0009 09:40:55 Msec=3000 True Az=112.995 Ze=-107.085 Az status=0008 Ze status=0009 09:40:55 Check angles 09:40:55 SkyScan query 09:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.04<-20536 Statuses=0008 0009 09:40:56 Msec=3750 True Az=112.995 Ze=-128.04 Az status=0008 Ze status=0009 09:40:56 Check angles 09:40:56 SkyScan query 09:40:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.995<-21933 Statuses=0008 0009 09:40:57 Msec=4500 True Az=112.995 Ze=-148.995 Az status=0008 Ze status=0009 09:40:57 Check angles 09:40:57 SkyScan query 09:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.935<-23329 Statuses=0008 0009 09:40:58 Msec=5250 True Az=112.995 Ze=-169.935 Az status=0008 Ze status=0009 09:40:58 Check angles 09:40:58 SkyScan query 09:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:40:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:40:58 Message to Master queued w/err=0: serial=83720 error=0 09:41:03 Received message from Master: op=Filter serial=83721 09:41:03 Color wheel filter change from 0 to 0 09:41:03 FLIGetFilterPos err=0 currentPosition=0 09:41:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:03 Filter is already there-color wheel unchanged 09:41:03 Received message from Master: op=Shutter serial=83722 09:41:03 Shutter LASER open 09:41:04 Received message from Camera: op=State serial=83724 09:41:04 GetSingleValue result=40 Value=cccccccc 09:41:04 SkyScan query 09:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:41:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:04 Parameters OK 09:41:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:04 Set A/D data flow result=40 09:41:04 Set A/D channel type result=40 09:41:04 Set A/D encoding result=40 09:41:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:04 Set channel filter=0.000000e+000 result=40 09:41:04 Config A/D Result=40 09:41:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:04 Get A/D filter: -9.255963e+061 result=40 09:41:04 Get A/D value=-858993460 result=40 09:41:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:04 Parameters OK 09:41:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:04 Set A/D data flow result=40 09:41:04 Set A/D channel type result=40 09:41:04 Set A/D encoding result=40 09:41:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:04 Set channel filter=0.000000e+000 result=40 09:41:04 Config A/D Result=40 09:41:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:04 Get A/D filter: -9.255963e+061 result=40 09:41:04 Get A/D value=-858993460 result=40 09:41:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:04 Aux= 09:41:04 Message to Camera, serial 83724 queued 09:41:13 Received message from Master: op=Shutter serial=83734 09:41:13 Shutter LASER close 09:41:13 Received message from Master: op=PointingHead serial=83738 09:41:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:41:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:41:14 Point started: ret=0 09:41:14 point_skyscan result=0 09:41:14 Check angles 09:41:14 SkyScan query 09:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 09:41:15 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 09:41:15 Check angles 09:41:15 SkyScan query 09:41:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.22<-20148 Statuses=0008 0009 09:41:16 Msec=750 True Az=112.995 Ze=-122.22 Az status=0008 Ze status=0009 09:41:16 Check angles 09:41:16 SkyScan query 09:41:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 09:41:17 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 09:41:17 Check angles 09:41:17 SkyScan query 09:41:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 09:41:17 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 09:41:17 Check angles 09:41:17 SkyScan query 09:41:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.965<-15931 Statuses=0008 0009 09:41:18 Msec=3000 True Az=112.995 Ze=-58.965 Az status=0008 Ze status=0009 09:41:18 Check angles 09:41:18 SkyScan query 09:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 09:41:19 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 09:41:19 Check angles 09:41:19 SkyScan query 09:41:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.17<-13078 Statuses=0008 0009 09:41:20 Msec=4500 True Az=112.995 Ze=-16.17 Az status=0008 Ze status=0009 09:41:20 Check angles 09:41:20 SkyScan query 09:41:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.635<-11691 Statuses=0008 0009 09:41:20 Msec=5250 True Az=112.995 Ze=4.635 Az status=0008 Ze status=0009 09:41:20 Check angles 09:41:20 SkyScan query 09:41:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:41:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:41:21 Message to Master queued w/err=0: serial=83738 error=0 09:41:26 Received message from Master: op=Filter serial=83739 09:41:26 Color wheel filter change from 0 to 0 09:41:26 FLIGetFilterPos err=0 currentPosition=0 09:41:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:26 Filter is already there-color wheel unchanged 09:41:26 Received message from Master: op=Shutter serial=83740 09:41:26 Shutter LASER close 09:41:26 Received message from Camera: op=State serial=83742 09:41:26 GetSingleValue result=40 Value=cccccccc 09:41:26 SkyScan query 09:41:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:41:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:27 Parameters OK 09:41:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:27 Set A/D data flow result=40 09:41:27 Set A/D channel type result=40 09:41:27 Set A/D encoding result=40 09:41:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:27 Set channel filter=0.000000e+000 result=40 09:41:27 Config A/D Result=40 09:41:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:27 Get A/D filter: -9.255963e+061 result=40 09:41:27 Get A/D value=-858993460 result=40 09:41:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:27 Parameters OK 09:41:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:27 Set A/D data flow result=40 09:41:27 Set A/D channel type result=40 09:41:27 Set A/D encoding result=40 09:41:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:27 Set channel filter=0.000000e+000 result=40 09:41:27 Config A/D Result=40 09:41:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:27 Get A/D filter: -9.255963e+061 result=40 09:41:27 Get A/D value=-858993460 result=40 09:41:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:27 Aux= 09:41:27 Message to Camera, serial 83742 queued 09:42:04 Received message from Master: op=PointingHead serial=83755 09:42:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:42:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:42:04 Point started: ret=0 09:42:04 point_skyscan result=0 09:42:05 Check angles 09:42:05 SkyScan query 09:42:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:42:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:42:05 Message to Master queued w/err=0: serial=83755 error=0 09:42:10 Received message from Master: op=Filter serial=83756 09:42:10 Color wheel filter change from 0 to 0 09:42:10 FLIGetFilterPos err=0 currentPosition=0 09:42:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:10 Filter is already there-color wheel unchanged 09:42:11 Received message from Master: op=Shutter serial=83757 09:42:11 Shutter LASER close 09:42:11 Received message from Camera: op=State serial=83759 09:42:11 GetSingleValue result=40 Value=cccccccc 09:42:11 SkyScan query 09:42:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:42:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:11 Parameters OK 09:42:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:11 Set A/D data flow result=40 09:42:11 Set A/D channel type result=40 09:42:11 Set A/D encoding result=40 09:42:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:11 Set channel filter=0.000000e+000 result=40 09:42:11 Config A/D Result=40 09:42:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:11 Get A/D filter: -9.255963e+061 result=40 09:42:11 Get A/D value=-858993460 result=40 09:42:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:11 Parameters OK 09:42:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:11 Set A/D data flow result=40 09:42:11 Set A/D channel type result=40 09:42:11 Set A/D encoding result=40 09:42:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:11 Set channel filter=0.000000e+000 result=40 09:42:11 Config A/D Result=40 09:42:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:11 Get A/D filter: -9.255963e+061 result=40 09:42:11 Get A/D value=-858993460 result=40 09:42:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:11 Aux= 09:42:11 Message to Camera, serial 83759 queued 09:42:48 Received message from Master: op=PointingHead serial=83772 09:42:48 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:42:48 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:42:48 Point started: ret=0 09:42:48 point_skyscan result=0 09:42:49 Check angles 09:42:49 SkyScan query 09:42:50 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 09:42:50 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 09:42:50 Check angles 09:42:50 SkyScan query 09:42:51 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.495<-12433 Statuses=0009 0008 09:42:51 Msec=750 True Az=153.6 Ze=-6.495 Az status=0009 Ze status=0008 09:42:51 Check angles 09:42:51 SkyScan query 09:42:51 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 09:42:51 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 09:42:51 Check angles 09:42:51 SkyScan query 09:42:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:42:52 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:42:52 Message to Master queued w/err=0: serial=83772 error=0 09:42:57 Received message from Master: op=Filter serial=83773 09:42:57 Color wheel filter change from 0 to 0 09:42:57 FLIGetFilterPos err=0 currentPosition=0 09:42:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:57 Filter is already there-color wheel unchanged 09:42:57 Received message from Master: op=Shutter serial=83774 09:42:57 Shutter LASER close 09:42:57 Received message from Camera: op=State serial=83776 09:42:57 GetSingleValue result=40 Value=cccccccc 09:42:57 SkyScan query 09:42:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:42:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:58 Parameters OK 09:42:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:58 Set A/D data flow result=40 09:42:58 Set A/D channel type result=40 09:42:58 Set A/D encoding result=40 09:42:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:58 Set channel filter=0.000000e+000 result=40 09:42:58 Config A/D Result=40 09:42:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:58 Get A/D filter: -9.255963e+061 result=40 09:42:58 Get A/D value=-858993460 result=40 09:42:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:58 Parameters OK 09:42:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:58 Set A/D data flow result=40 09:42:58 Set A/D channel type result=40 09:42:58 Set A/D encoding result=40 09:42:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:58 Set channel filter=0.000000e+000 result=40 09:42:58 Config A/D Result=40 09:42:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:58 Get A/D filter: -9.255963e+061 result=40 09:42:58 Get A/D value=-858993460 result=40 09:42:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:58 Aux= 09:42:58 Message to Camera, serial 83776 queued 09:43:35 Received message from Master: op=PointingHead serial=83789 09:43:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:43:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:43:35 Point started: ret=0 09:43:35 point_skyscan result=0 09:43:36 Check angles 09:43:36 SkyScan query 09:43:36 SkyScan query done: ret=0 az=153.165<-10211 ze=6.51<-11566 Statuses=0009 0008 09:43:36 Msec=0 True Az=153.165 Ze=6.51 Az status=0009 Ze status=0008 09:43:36 Check angles 09:43:36 SkyScan query 09:43:37 SkyScan query done: ret=0 az=135.675<-9045 ze=6.495<-11567 Statuses=0009 0008 09:43:37 Msec=750 True Az=135.675 Ze=6.495 Az status=0009 Ze status=0008 09:43:37 Check angles 09:43:37 SkyScan query 09:43:38 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 09:43:38 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 09:43:38 Check angles 09:43:38 SkyScan query 09:43:39 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 09:43:39 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 09:43:39 Message to Master queued w/err=0: serial=83789 error=0 09:43:44 Received message from Master: op=Filter serial=83790 09:43:44 Color wheel filter change from 0 to 0 09:43:44 FLIGetFilterPos err=0 currentPosition=0 09:43:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:44 Filter is already there-color wheel unchanged 09:43:44 Received message from Master: op=Shutter serial=83791 09:43:44 Shutter LASER close 09:43:44 Received message from Camera: op=State serial=83793 09:43:44 GetSingleValue result=40 Value=cccccccc 09:43:44 SkyScan query 09:43:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:43:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:44 Parameters OK 09:43:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:44 Set A/D data flow result=40 09:43:44 Set A/D channel type result=40 09:43:44 Set A/D encoding result=40 09:43:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:44 Set channel filter=0.000000e+000 result=40 09:43:44 Config A/D Result=40 09:43:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:44 Get A/D filter: -9.255963e+061 result=40 09:43:44 Get A/D value=-858993460 result=40 09:43:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:44 Parameters OK 09:43:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:44 Set A/D data flow result=40 09:43:44 Set A/D channel type result=40 09:43:44 Set A/D encoding result=40 09:43:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:44 Set channel filter=0.000000e+000 result=40 09:43:44 Config A/D Result=40 09:43:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:44 Get A/D filter: -9.255963e+061 result=40 09:43:44 Get A/D value=-858993460 result=40 09:43:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:44 Aux= 09:43:44 Message to Camera, serial 83793 queued [UTC 2019-3-3 09:43:50] 09:44:21 Received message from Master: op=PointingHead serial=83806 09:44:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:44:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:44:22 Point started: ret=0 09:44:22 point_skyscan result=0 09:44:22 Check angles 09:44:22 SkyScan query 09:44:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.685<-13579 Statuses=0008 0009 09:44:23 Msec=0 True Az=112.995 Ze=-23.685 Az status=0008 Ze status=0009 09:44:23 Check angles 09:44:23 SkyScan query 09:44:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.045<-15003 Statuses=0008 0009 09:44:24 Msec=750 True Az=112.995 Ze=-45.045 Az status=0008 Ze status=0009 09:44:24 Check angles 09:44:24 SkyScan query 09:44:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.435<-16429 Statuses=0008 0009 09:44:24 Msec=1500 True Az=112.995 Ze=-66.435 Az status=0008 Ze status=0009 09:44:25 Check angles 09:44:25 SkyScan query 09:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.405<-17827 Statuses=0008 0009 09:44:25 Msec=2250 True Az=112.995 Ze=-87.405 Az status=0008 Ze status=0009 09:44:25 Check angles 09:44:25 SkyScan query 09:44:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.345<-19223 Statuses=0008 0009 09:44:26 Msec=3000 True Az=112.995 Ze=-108.345 Az status=0008 Ze status=0009 09:44:26 Check angles 09:44:26 SkyScan query 09:44:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.3<-20620 Statuses=0008 0009 09:44:27 Msec=3750 True Az=112.995 Ze=-129.3 Az status=0008 Ze status=0009 09:44:27 Check angles 09:44:27 SkyScan query 09:44:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.255<-22017 Statuses=0008 0009 09:44:27 Msec=4500 True Az=112.995 Ze=-150.255 Az status=0008 Ze status=0009 09:44:28 Check angles 09:44:28 SkyScan query 09:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.39<-23426 Statuses=0008 0009 09:44:28 Msec=5250 True Az=112.995 Ze=-171.39 Az status=0008 Ze status=0009 09:44:28 Check angles 09:44:28 SkyScan query 09:44:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:44:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:44:29 Message to Master queued w/err=0: serial=83806 error=0 09:44:34 Received message from Master: op=Filter serial=83807 09:44:34 Color wheel filter change from 0 to 0 09:44:34 FLIGetFilterPos err=0 currentPosition=0 09:44:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:34 Filter is already there-color wheel unchanged 09:44:34 Received message from Master: op=Shutter serial=83808 09:44:34 Shutter LASER open 09:44:34 Received message from Camera: op=State serial=83810 09:44:34 GetSingleValue result=40 Value=cccccccc 09:44:34 SkyScan query 09:44:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:44:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:35 Parameters OK 09:44:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:35 Set A/D data flow result=40 09:44:35 Set A/D channel type result=40 09:44:35 Set A/D encoding result=40 09:44:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:35 Set channel filter=0.000000e+000 result=40 09:44:35 Config A/D Result=40 09:44:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:35 Get A/D filter: -9.255963e+061 result=40 09:44:35 Get A/D value=-858993460 result=40 09:44:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:35 Parameters OK 09:44:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:35 Set A/D data flow result=40 09:44:35 Set A/D channel type result=40 09:44:35 Set A/D encoding result=40 09:44:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:35 Set channel filter=0.000000e+000 result=40 09:44:35 Config A/D Result=40 09:44:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:35 Get A/D filter: -9.255963e+061 result=40 09:44:35 Get A/D value=-858993460 result=40 09:44:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:35 Aux= 09:44:35 Message to Camera, serial 83810 queued 09:44:43 Received message from Master: op=Shutter serial=83820 09:44:43 Shutter LASER close 09:44:44 Received message from Master: op=PointingHead serial=83824 09:44:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:44:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:44:44 Point started: ret=0 09:44:44 point_skyscan result=0 09:44:45 Check angles 09:44:45 SkyScan query 09:44:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 09:44:45 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 09:44:46 Check angles 09:44:46 SkyScan query 09:44:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 09:44:46 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 09:44:46 Check angles 09:44:46 SkyScan query 09:44:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 09:44:47 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 09:44:47 Check angles 09:44:47 SkyScan query 09:44:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 09:44:48 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 09:44:48 Check angles 09:44:48 SkyScan query 09:44:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 09:44:48 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 09:44:49 Check angles 09:44:49 SkyScan query 09:44:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 09:44:49 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 09:44:49 Check angles 09:44:49 SkyScan query 09:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.325<-13155 Statuses=0008 0009 09:44:50 Msec=4500 True Az=112.995 Ze=-17.325 Az status=0008 Ze status=0009 09:44:50 Check angles 09:44:50 SkyScan query 09:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 09:44:51 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 09:44:51 Check angles 09:44:51 SkyScan query 09:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:44:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:44:51 Message to Master queued w/err=0: serial=83824 error=0 09:44:56 Received message from Master: op=Filter serial=83825 09:44:56 Color wheel filter change from 0 to 0 09:44:56 FLIGetFilterPos err=0 currentPosition=0 09:44:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:56 Filter is already there-color wheel unchanged 09:44:57 Received message from Master: op=Shutter serial=83826 09:44:57 Shutter LASER close 09:44:57 Received message from Camera: op=State serial=83828 09:44:57 GetSingleValue result=40 Value=cccccccc 09:44:57 SkyScan query 09:44:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:44:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:57 Parameters OK 09:44:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:57 Set A/D data flow result=40 09:44:57 Set A/D channel type result=40 09:44:57 Set A/D encoding result=40 09:44:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:57 Set channel filter=0.000000e+000 result=40 09:44:57 Config A/D Result=40 09:44:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:57 Get A/D filter: -9.255963e+061 result=40 09:44:57 Get A/D value=-858993460 result=40 09:44:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:57 Parameters OK 09:44:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:57 Set A/D data flow result=40 09:44:57 Set A/D channel type result=40 09:44:57 Set A/D encoding result=40 09:44:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:57 Set channel filter=0.000000e+000 result=40 09:44:57 Config A/D Result=40 09:44:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:57 Get A/D filter: -9.255963e+061 result=40 09:44:57 Get A/D value=-858993460 result=40 09:44:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:57 Aux= 09:44:57 Message to Camera, serial 83828 queued 09:45:34 Received message from Master: op=PointingHead serial=83841 09:45:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:45:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:45:35 Point started: ret=0 09:45:35 point_skyscan result=0 09:45:35 Check angles 09:45:35 SkyScan query 09:45:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:45:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:45:36 Message to Master queued w/err=0: serial=83841 error=0 09:45:41 Received message from Master: op=Filter serial=83842 09:45:41 Color wheel filter change from 0 to 0 09:45:41 FLIGetFilterPos err=0 currentPosition=0 09:45:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:41 Filter is already there-color wheel unchanged 09:45:41 Received message from Master: op=Shutter serial=83843 09:45:41 Shutter LASER close 09:45:41 Received message from Camera: op=State serial=83845 09:45:41 GetSingleValue result=40 Value=cccccccc 09:45:41 SkyScan query 09:45:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:45:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:42 Parameters OK 09:45:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:42 Set A/D data flow result=40 09:45:42 Set A/D channel type result=40 09:45:42 Set A/D encoding result=40 09:45:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:42 Set channel filter=0.000000e+000 result=40 09:45:42 Config A/D Result=40 09:45:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:42 Get A/D filter: -9.255963e+061 result=40 09:45:42 Get A/D value=-858993460 result=40 09:45:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:42 Parameters OK 09:45:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:42 Set A/D data flow result=40 09:45:42 Set A/D channel type result=40 09:45:42 Set A/D encoding result=40 09:45:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:42 Set channel filter=0.000000e+000 result=40 09:45:42 Config A/D Result=40 09:45:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:42 Get A/D filter: -9.255963e+061 result=40 09:45:42 Get A/D value=-858993460 result=40 09:45:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:42 Aux= 09:45:42 Message to Camera, serial 83845 queued 09:46:19 Received message from Master: op=PointingHead serial=83858 09:46:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:46:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:46:19 Point started: ret=0 09:46:19 point_skyscan result=0 09:46:20 Check angles 09:46:20 SkyScan query 09:46:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:46:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:46:20 Message to Master queued w/err=0: serial=83858 error=0 09:46:25 Received message from Master: op=Filter serial=83859 09:46:25 Color wheel filter change from 0 to 0 09:46:25 FLIGetFilterPos err=0 currentPosition=0 09:46:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:25 Filter is already there-color wheel unchanged 09:46:25 Received message from Master: op=Shutter serial=83860 09:46:25 Shutter LASER close 09:46:25 Received message from Camera: op=State serial=83862 09:46:25 GetSingleValue result=40 Value=cccccccc 09:46:25 SkyScan query 09:46:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:46:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:26 Parameters OK 09:46:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:26 Set A/D data flow result=40 09:46:26 Set A/D channel type result=40 09:46:26 Set A/D encoding result=40 09:46:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:26 Set channel filter=0.000000e+000 result=40 09:46:26 Config A/D Result=40 09:46:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:26 Get A/D filter: -9.255963e+061 result=40 09:46:26 Get A/D value=-858993460 result=40 09:46:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:26 Parameters OK 09:46:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:26 Set A/D data flow result=40 09:46:26 Set A/D channel type result=40 09:46:26 Set A/D encoding result=40 09:46:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:26 Set channel filter=0.000000e+000 result=40 09:46:26 Config A/D Result=40 09:46:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:26 Get A/D filter: -9.255963e+061 result=40 09:46:26 Get A/D value=-858993460 result=40 09:46:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:26 Aux= 09:46:26 Message to Camera, serial 83862 queued 09:47:03 Received message from Master: op=PointingHead serial=83875 09:47:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:47:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:47:03 Point started: ret=0 09:47:03 point_skyscan result=0 09:47:04 Check angles 09:47:04 SkyScan query 09:47:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:47:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:47:05 Message to Master queued w/err=0: serial=83875 error=0 09:47:10 Received message from Master: op=Filter serial=83876 09:47:10 Color wheel filter change from 0 to 0 09:47:10 FLIGetFilterPos err=0 currentPosition=0 09:47:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:10 Filter is already there-color wheel unchanged 09:47:10 Received message from Master: op=Shutter serial=83877 09:47:10 Shutter LASER close 09:47:10 Received message from Camera: op=State serial=83879 09:47:10 GetSingleValue result=40 Value=cccccccc 09:47:10 SkyScan query 09:47:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:47:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:10 Parameters OK 09:47:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:10 Set A/D data flow result=40 09:47:10 Set A/D channel type result=40 09:47:10 Set A/D encoding result=40 09:47:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:10 Set channel filter=0.000000e+000 result=40 09:47:10 Config A/D Result=40 09:47:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:10 Get A/D filter: -9.255963e+061 result=40 09:47:10 Get A/D value=-858993460 result=40 09:47:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:10 Parameters OK 09:47:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:10 Set A/D data flow result=40 09:47:10 Set A/D channel type result=40 09:47:10 Set A/D encoding result=40 09:47:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:10 Set channel filter=0.000000e+000 result=40 09:47:10 Config A/D Result=40 09:47:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:10 Get A/D filter: -9.255963e+061 result=40 09:47:10 Get A/D value=-858993460 result=40 09:47:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:10 Aux= 09:47:10 Message to Camera, serial 83879 queued 09:47:47 Received message from Master: op=PointingHead serial=83892 09:47:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:47:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:47:47 Point started: ret=0 09:47:47 point_skyscan result=0 09:47:48 Check angles 09:47:48 SkyScan query 09:47:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 09:47:49 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 09:47:49 Check angles 09:47:49 SkyScan query 09:47:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.775<-14985 Statuses=0008 0009 09:47:50 Msec=750 True Az=112.995 Ze=-44.775 Az status=0008 Ze status=0009 09:47:50 Check angles 09:47:50 SkyScan query 09:47:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 09:47:50 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 09:47:50 Check angles 09:47:50 SkyScan query 09:47:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 09:47:51 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 09:47:51 Check angles 09:47:51 SkyScan query 09:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 09:47:52 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 09:47:52 Check angles 09:47:52 SkyScan query 09:47:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 09:47:53 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 09:47:53 Check angles 09:47:53 SkyScan query 09:47:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.535<-21969 Statuses=0008 0009 09:47:53 Msec=4500 True Az=112.995 Ze=-149.535 Az status=0008 Ze status=0009 09:47:53 Check angles 09:47:53 SkyScan query 09:47:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.475<-23365 Statuses=0008 0009 09:47:54 Msec=5250 True Az=112.995 Ze=-170.475 Az status=0008 Ze status=0009 09:47:54 Check angles 09:47:54 SkyScan query 09:47:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:47:55 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:47:55 Message to Master queued w/err=0: serial=83892 error=0 09:48:00 Received message from Master: op=Filter serial=83893 09:48:00 Color wheel filter change from 0 to 0 09:48:00 FLIGetFilterPos err=0 currentPosition=0 09:48:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:00 Filter is already there-color wheel unchanged 09:48:00 Received message from Master: op=Shutter serial=83894 09:48:00 Shutter LASER open 09:48:00 Received message from Camera: op=State serial=83896 09:48:00 GetSingleValue result=40 Value=cccccccc 09:48:00 SkyScan query 09:48:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:48:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:01 Parameters OK 09:48:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:01 Set A/D data flow result=40 09:48:01 Set A/D channel type result=40 09:48:01 Set A/D encoding result=40 09:48:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:01 Set channel filter=0.000000e+000 result=40 09:48:01 Config A/D Result=40 09:48:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:01 Get A/D filter: -9.255963e+061 result=40 09:48:01 Get A/D value=-858993460 result=40 09:48:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:01 Parameters OK 09:48:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:01 Set A/D data flow result=40 09:48:01 Set A/D channel type result=40 09:48:01 Set A/D encoding result=40 09:48:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:01 Set channel filter=0.000000e+000 result=40 09:48:01 Config A/D Result=40 09:48:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:01 Get A/D filter: -9.255963e+061 result=40 09:48:01 Get A/D value=-858993460 result=40 09:48:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:01 Aux= 09:48:01 Message to Camera, serial 83896 queued 09:48:09 Received message from Master: op=Shutter serial=83906 09:48:09 Shutter LASER close 09:48:10 Received message from Master: op=PointingHead serial=83910 09:48:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:48:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:48:10 Point started: ret=0 09:48:10 point_skyscan result=0 09:48:11 Check angles 09:48:11 SkyScan query 09:48:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 09:48:11 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 09:48:12 Check angles 09:48:12 SkyScan query 09:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 09:48:12 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 09:48:12 Check angles 09:48:12 SkyScan query 09:48:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 09:48:13 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 09:48:13 Check angles 09:48:13 SkyScan query 09:48:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 09:48:14 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 09:48:14 Check angles 09:48:14 SkyScan query 09:48:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 09:48:14 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 09:48:15 Check angles 09:48:15 SkyScan query 09:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 09:48:15 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 09:48:15 Check angles 09:48:15 SkyScan query 09:48:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.325<-13155 Statuses=0008 0009 09:48:16 Msec=4500 True Az=112.995 Ze=-17.325 Az status=0008 Ze status=0009 09:48:16 Check angles 09:48:16 SkyScan query 09:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=3.63<-11758 Statuses=0008 0009 09:48:17 Msec=5250 True Az=112.995 Ze=3.63 Az status=0008 Ze status=0009 09:48:17 Check angles 09:48:17 SkyScan query 09:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:48:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:48:17 Message to Master queued w/err=0: serial=83910 error=0 09:48:22 Received message from Master: op=Filter serial=83911 09:48:22 Color wheel filter change from 0 to 0 09:48:22 FLIGetFilterPos err=0 currentPosition=0 09:48:22 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:22 Filter is already there-color wheel unchanged 09:48:23 Received message from Master: op=Shutter serial=83912 09:48:23 Shutter LASER close 09:48:23 Received message from Camera: op=State serial=83914 09:48:23 GetSingleValue result=40 Value=cccccccc 09:48:23 SkyScan query 09:48:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:48:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:23 Parameters OK 09:48:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:23 Set A/D data flow result=40 09:48:23 Set A/D channel type result=40 09:48:23 Set A/D encoding result=40 09:48:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:23 Set channel filter=0.000000e+000 result=40 09:48:23 Config A/D Result=40 09:48:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:23 Get A/D filter: -9.255963e+061 result=40 09:48:23 Get A/D value=-858993460 result=40 09:48:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:23 Parameters OK 09:48:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:23 Set A/D data flow result=40 09:48:23 Set A/D channel type result=40 09:48:23 Set A/D encoding result=40 09:48:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:23 Set channel filter=0.000000e+000 result=40 09:48:23 Config A/D Result=40 09:48:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:23 Get A/D filter: -9.255963e+061 result=40 09:48:23 Get A/D value=-858993460 result=40 09:48:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:23 Aux= 09:48:23 Message to Camera, serial 83914 queued 09:49:00 Received message from Master: op=PointingHead serial=83927 09:49:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:49:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:49:01 Point started: ret=0 09:49:01 point_skyscan result=0 09:49:01 Check angles 09:49:01 SkyScan query 09:49:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:49:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:49:02 Message to Master queued w/err=0: serial=83927 error=0 09:49:07 Received message from Master: op=Filter serial=83928 09:49:07 Color wheel filter change from 0 to 0 09:49:07 FLIGetFilterPos err=0 currentPosition=0 09:49:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:07 Filter is already there-color wheel unchanged 09:49:07 Received message from Master: op=Shutter serial=83929 09:49:07 Shutter LASER close 09:49:07 Received message from Camera: op=State serial=83931 09:49:07 GetSingleValue result=40 Value=cccccccc 09:49:07 SkyScan query 09:49:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:49:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:08 Parameters OK 09:49:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:08 Set A/D data flow result=40 09:49:08 Set A/D channel type result=40 09:49:08 Set A/D encoding result=40 09:49:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:08 Set channel filter=0.000000e+000 result=40 09:49:08 Config A/D Result=40 09:49:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:08 Get A/D filter: -9.255963e+061 result=40 09:49:08 Get A/D value=-858993460 result=40 09:49:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:08 Parameters OK 09:49:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:08 Set A/D data flow result=40 09:49:08 Set A/D channel type result=40 09:49:08 Set A/D encoding result=40 09:49:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:08 Set channel filter=0.000000e+000 result=40 09:49:08 Config A/D Result=40 09:49:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:08 Get A/D filter: -9.255963e+061 result=40 09:49:08 Get A/D value=-858993460 result=40 09:49:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:08 Aux= 09:49:08 Message to Camera, serial 83931 queued 09:49:45 Received message from Master: op=PointingHead serial=83944 09:49:45 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:49:45 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:49:45 Point started: ret=0 09:49:45 point_skyscan result=0 09:49:46 Check angles 09:49:46 SkyScan query 09:49:46 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 09:49:46 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 09:49:46 Check angles 09:49:46 SkyScan query 09:49:47 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 09:49:47 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 09:49:47 Check angles 09:49:47 SkyScan query 09:49:48 SkyScan query done: ret=0 az=170.985<-11399 ze=-6.495<-12433 Statuses=0009 0008 09:49:48 Msec=1500 True Az=170.985 Ze=-6.495 Az status=0009 Ze status=0008 09:49:48 Check angles 09:49:48 SkyScan query 09:49:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:49:48 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:49:48 Message to Master queued w/err=0: serial=83944 error=0 09:49:53 Received message from Master: op=Filter serial=83945 09:49:53 Color wheel filter change from 0 to 0 09:49:53 FLIGetFilterPos err=0 currentPosition=0 09:49:53 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:53 Filter is already there-color wheel unchanged 09:49:54 Received message from Master: op=Shutter serial=83946 09:49:54 Shutter LASER close 09:49:54 Received message from Camera: op=State serial=83948 09:49:54 GetSingleValue result=40 Value=cccccccc 09:49:54 SkyScan query 09:49:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:49:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:54 Parameters OK 09:49:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:54 Set A/D data flow result=40 09:49:54 Set A/D channel type result=40 09:49:54 Set A/D encoding result=40 09:49:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:54 Set channel filter=0.000000e+000 result=40 09:49:54 Config A/D Result=40 09:49:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:54 Get A/D filter: -9.255963e+061 result=40 09:49:54 Get A/D value=-858993460 result=40 09:49:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:54 Parameters OK 09:49:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:54 Set A/D data flow result=40 09:49:54 Set A/D channel type result=40 09:49:54 Set A/D encoding result=40 09:49:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:54 Set channel filter=0.000000e+000 result=40 09:49:54 Config A/D Result=40 09:49:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:54 Get A/D filter: -9.255963e+061 result=40 09:49:54 Get A/D value=-858993460 result=40 09:49:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:54 Aux= 09:49:54 Message to Camera, serial 83948 queued 09:50:31 Received message from Master: op=PointingHead serial=83961 09:50:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:50:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:50:31 Point started: ret=0 09:50:31 point_skyscan result=0 09:50:32 Check angles 09:50:32 SkyScan query 09:50:33 SkyScan query done: ret=0 az=153.03<-10202 ze=6.51<-11566 Statuses=0009 0008 09:50:33 Msec=0 True Az=153.03 Ze=6.51 Az status=0009 Ze status=0008 09:50:33 Check angles 09:50:33 SkyScan query 09:50:34 SkyScan query done: ret=0 az=135.165<-9011 ze=6.495<-11567 Statuses=0009 0008 09:50:34 Msec=750 True Az=135.165 Ze=6.495 Az status=0009 Ze status=0008 09:50:34 Check angles 09:50:34 SkyScan query 09:50:34 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 09:50:34 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 09:50:34 Check angles 09:50:34 SkyScan query 09:50:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:50:35 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:50:35 Message to Master queued w/err=0: serial=83961 error=0 09:50:40 Received message from Master: op=Filter serial=83962 09:50:40 Color wheel filter change from 0 to 0 09:50:40 FLIGetFilterPos err=0 currentPosition=0 09:50:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:40 Filter is already there-color wheel unchanged 09:50:40 Received message from Master: op=Shutter serial=83963 09:50:40 Shutter LASER close 09:50:40 Received message from Camera: op=State serial=83965 09:50:40 GetSingleValue result=40 Value=cccccccc 09:50:40 SkyScan query 09:50:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:50:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:41 Parameters OK 09:50:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:41 Set A/D data flow result=40 09:50:41 Set A/D channel type result=40 09:50:41 Set A/D encoding result=40 09:50:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:41 Set channel filter=0.000000e+000 result=40 09:50:41 Config A/D Result=40 09:50:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:41 Get A/D filter: -9.255963e+061 result=40 09:50:41 Get A/D value=-858993460 result=40 09:50:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:41 Parameters OK 09:50:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:41 Set A/D data flow result=40 09:50:41 Set A/D channel type result=40 09:50:41 Set A/D encoding result=40 09:50:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:41 Set channel filter=0.000000e+000 result=40 09:50:41 Config A/D Result=40 09:50:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:41 Get A/D filter: -9.255963e+061 result=40 09:50:41 Get A/D value=-858993460 result=40 09:50:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:41 Aux= 09:50:41 Message to Camera, serial 83965 queued 09:51:18 Received message from Master: op=PointingHead serial=83978 09:51:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:51:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:51:18 Point started: ret=0 09:51:18 point_skyscan result=0 09:51:19 Check angles 09:51:19 SkyScan query 09:51:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 09:51:19 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 09:51:20 Check angles 09:51:20 SkyScan query 09:51:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 09:51:20 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 09:51:20 Check angles 09:51:20 SkyScan query 09:51:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 09:51:21 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 09:51:21 Check angles 09:51:21 SkyScan query 09:51:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 09:51:22 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 09:51:22 Check angles 09:51:22 SkyScan query 09:51:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.115<-19141 Statuses=0008 0009 09:51:22 Msec=3000 True Az=112.995 Ze=-107.115 Az status=0008 Ze status=0009 09:51:23 Check angles 09:51:23 SkyScan query 09:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.07<-20538 Statuses=0008 0009 09:51:23 Msec=3750 True Az=112.995 Ze=-128.07 Az status=0008 Ze status=0009 09:51:23 Check angles 09:51:23 SkyScan query 09:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.445<-21963 Statuses=0008 0009 09:51:24 Msec=4500 True Az=112.995 Ze=-149.445 Az status=0008 Ze status=0009 09:51:24 Check angles 09:51:24 SkyScan query 09:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.4<-23360 Statuses=0008 0009 09:51:25 Msec=5250 True Az=112.995 Ze=-170.4 Az status=0008 Ze status=0009 09:51:25 Check angles 09:51:25 SkyScan query 09:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:51:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:51:25 Message to Master queued w/err=0: serial=83978 error=0 09:51:30 Received message from Master: op=Filter serial=83979 09:51:30 Color wheel filter change from 0 to 0 09:51:30 FLIGetFilterPos err=0 currentPosition=0 09:51:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:30 Filter is already there-color wheel unchanged 09:51:31 Received message from Master: op=Shutter serial=83980 09:51:31 Shutter LASER open 09:51:31 Received message from Camera: op=State serial=83982 09:51:31 GetSingleValue result=40 Value=cccccccc 09:51:31 SkyScan query 09:51:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:51:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:31 Parameters OK 09:51:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:31 Set A/D data flow result=40 09:51:31 Set A/D channel type result=40 09:51:31 Set A/D encoding result=40 09:51:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:31 Set channel filter=0.000000e+000 result=40 09:51:31 Config A/D Result=40 09:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:31 Get A/D filter: -9.255963e+061 result=40 09:51:31 Get A/D value=-858993460 result=40 09:51:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:31 Parameters OK 09:51:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:31 Set A/D data flow result=40 09:51:31 Set A/D channel type result=40 09:51:31 Set A/D encoding result=40 09:51:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:31 Set channel filter=0.000000e+000 result=40 09:51:31 Config A/D Result=40 09:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:31 Get A/D filter: -9.255963e+061 result=40 09:51:31 Get A/D value=-858993460 result=40 09:51:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:31 Aux= 09:51:31 Message to Camera, serial 83982 queued 09:51:39 Received message from Master: op=Shutter serial=83991 09:51:39 Shutter LASER close 09:51:39 Received message from Master: op=PointingHead serial=83995 09:51:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:51:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:51:40 Point started: ret=0 09:51:40 point_skyscan result=0 09:51:40 Check angles 09:51:40 SkyScan query 09:51:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.665<-21511 Statuses=0008 0009 09:51:41 Msec=0 True Az=112.995 Ze=-142.665 Az status=0008 Ze status=0009 09:51:41 Check angles 09:51:41 SkyScan query 09:51:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 09:51:42 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 09:51:42 Check angles 09:51:42 SkyScan query 09:51:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.74<-18716 Statuses=0008 0009 09:51:42 Msec=1500 True Az=112.995 Ze=-100.74 Az status=0008 Ze status=0009 09:51:43 Check angles 09:51:43 SkyScan query 09:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.8<-17320 Statuses=0008 0009 09:51:43 Msec=2250 True Az=112.995 Ze=-79.8 Az status=0008 Ze status=0009 09:51:43 Check angles 09:51:43 SkyScan query 09:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.86<-15924 Statuses=0008 0009 09:51:44 Msec=3000 True Az=112.995 Ze=-58.86 Az status=0008 Ze status=0009 09:51:44 Check angles 09:51:44 SkyScan query 09:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.89<-14526 Statuses=0008 0009 09:51:45 Msec=3750 True Az=112.995 Ze=-37.89 Az status=0008 Ze status=0009 09:51:45 Check angles 09:51:45 SkyScan query 09:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 09:51:45 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 09:51:46 Check angles 09:51:46 SkyScan query 09:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=4.02<-11732 Statuses=0008 0009 09:51:46 Msec=5250 True Az=112.995 Ze=4.02 Az status=0008 Ze status=0009 09:51:46 Check angles 09:51:46 SkyScan query 09:51:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:51:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:51:47 Message to Master queued w/err=0: serial=83995 error=0 09:51:52 Received message from Master: op=Filter serial=83996 09:51:52 Color wheel filter change from 0 to 0 09:51:52 FLIGetFilterPos err=0 currentPosition=0 09:51:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:52 Filter is already there-color wheel unchanged 09:51:52 Received message from Master: op=Shutter serial=83997 09:51:52 Shutter LASER close 09:51:52 Received message from Camera: op=State serial=83999 09:51:52 GetSingleValue result=40 Value=cccccccc 09:51:52 SkyScan query 09:51:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:51:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:53 Parameters OK 09:51:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:53 Set A/D data flow result=40 09:51:53 Set A/D channel type result=40 09:51:53 Set A/D encoding result=40 09:51:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:53 Set channel filter=0.000000e+000 result=40 09:51:53 Config A/D Result=40 09:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:53 Get A/D filter: -9.255963e+061 result=40 09:51:53 Get A/D value=-858993460 result=40 09:51:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:53 Parameters OK 09:51:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:53 Set A/D data flow result=40 09:51:53 Set A/D channel type result=40 09:51:53 Set A/D encoding result=40 09:51:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:53 Set channel filter=0.000000e+000 result=40 09:51:53 Config A/D Result=40 09:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:53 Get A/D filter: -9.255963e+061 result=40 09:51:53 Get A/D value=-858993460 result=40 09:51:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:53 Aux= 09:51:53 Message to Camera, serial 83999 queued 09:52:30 Received message from Master: op=PointingHead serial=84012 09:52:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:52:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:52:30 Point started: ret=0 09:52:30 point_skyscan result=0 09:52:31 Check angles 09:52:31 SkyScan query 09:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:52:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:52:31 Message to Master queued w/err=0: serial=84012 error=0 09:52:36 Received message from Master: op=Filter serial=84013 09:52:36 Color wheel filter change from 0 to 0 09:52:36 FLIGetFilterPos err=0 currentPosition=0 09:52:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:36 Filter is already there-color wheel unchanged 09:52:37 Received message from Master: op=Shutter serial=84014 09:52:37 Shutter LASER close 09:52:37 Received message from Camera: op=State serial=84016 09:52:37 GetSingleValue result=40 Value=cccccccc 09:52:37 SkyScan query 09:52:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:52:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:37 Parameters OK 09:52:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:37 Set A/D data flow result=40 09:52:37 Set A/D channel type result=40 09:52:37 Set A/D encoding result=40 09:52:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:37 Set channel filter=0.000000e+000 result=40 09:52:37 Config A/D Result=40 09:52:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:37 Get A/D filter: -9.255963e+061 result=40 09:52:37 Get A/D value=-858993460 result=40 09:52:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:37 Parameters OK 09:52:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:37 Set A/D data flow result=40 09:52:37 Set A/D channel type result=40 09:52:37 Set A/D encoding result=40 09:52:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:37 Set channel filter=0.000000e+000 result=40 09:52:37 Config A/D Result=40 09:52:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:37 Get A/D filter: -9.255963e+061 result=40 09:52:37 Get A/D value=-858993460 result=40 09:52:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:37 Aux= 09:52:37 Message to Camera, serial 84016 queued 09:53:14 Received message from Master: op=PointingHead serial=84029 09:53:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:53:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:53:14 Point started: ret=0 09:53:14 point_skyscan result=0 09:53:15 Check angles 09:53:15 SkyScan query 09:53:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:53:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:53:16 Message to Master queued w/err=0: serial=84029 error=0 09:53:21 Received message from Master: op=Filter serial=84030 09:53:21 Color wheel filter change from 0 to 0 09:53:21 FLIGetFilterPos err=0 currentPosition=0 09:53:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:21 Filter is already there-color wheel unchanged 09:53:21 Received message from Master: op=Shutter serial=84031 09:53:21 Shutter LASER close 09:53:21 Received message from Camera: op=State serial=84033 09:53:21 GetSingleValue result=40 Value=cccccccc 09:53:21 SkyScan query 09:53:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:53:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:21 Parameters OK 09:53:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:21 Set A/D data flow result=40 09:53:21 Set A/D channel type result=40 09:53:21 Set A/D encoding result=40 09:53:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:21 Set channel filter=0.000000e+000 result=40 09:53:21 Config A/D Result=40 09:53:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:21 Get A/D filter: -9.255963e+061 result=40 09:53:21 Get A/D value=-858993460 result=40 09:53:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:21 Parameters OK 09:53:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:21 Set A/D data flow result=40 09:53:21 Set A/D channel type result=40 09:53:21 Set A/D encoding result=40 09:53:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:21 Set channel filter=0.000000e+000 result=40 09:53:21 Config A/D Result=40 09:53:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:21 Get A/D filter: -9.255963e+061 result=40 09:53:21 Get A/D value=-858993460 result=40 09:53:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:21 Aux= 09:53:21 Message to Camera, serial 84033 queued 09:53:58 Received message from Master: op=PointingHead serial=84046 09:53:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:53:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:53:59 Point started: ret=0 09:53:59 point_skyscan result=0 09:53:59 Check angles 09:53:59 SkyScan query 09:54:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:54:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:54:00 Message to Master queued w/err=0: serial=84046 error=0 09:54:05 Received message from Master: op=Filter serial=84047 09:54:05 Color wheel filter change from 0 to 0 09:54:05 FLIGetFilterPos err=0 currentPosition=0 09:54:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:05 Filter is already there-color wheel unchanged 09:54:05 Received message from Master: op=Shutter serial=84048 09:54:05 Shutter LASER close 09:54:05 Received message from Camera: op=State serial=84050 09:54:05 GetSingleValue result=40 Value=cccccccc 09:54:05 SkyScan query 09:54:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:54:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:06 Parameters OK 09:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:06 Set A/D data flow result=40 09:54:06 Set A/D channel type result=40 09:54:06 Set A/D encoding result=40 09:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:06 Set channel filter=0.000000e+000 result=40 09:54:06 Config A/D Result=40 09:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:06 Get A/D filter: -9.255963e+061 result=40 09:54:06 Get A/D value=-858993460 result=40 09:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:06 Parameters OK 09:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:06 Set A/D data flow result=40 09:54:06 Set A/D channel type result=40 09:54:06 Set A/D encoding result=40 09:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:06 Set channel filter=0.000000e+000 result=40 09:54:06 Config A/D Result=40 09:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:06 Get A/D filter: -9.255963e+061 result=40 09:54:06 Get A/D value=-858993460 result=40 09:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:06 Aux= 09:54:06 Message to Camera, serial 84050 queued 09:54:43 Received message from Master: op=PointingHead serial=84063 09:54:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:54:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:54:43 Point started: ret=0 09:54:43 point_skyscan result=0 09:54:44 Check angles 09:54:44 SkyScan query 09:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.835<-13589 Statuses=0008 0009 09:54:44 Msec=0 True Az=112.995 Ze=-23.835 Az status=0008 Ze status=0009 09:54:44 Check angles 09:54:44 SkyScan query 09:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.195<-15013 Statuses=0008 0009 [UTC 2019-3-3 09:54:45] 09:54:45 Msec=750 True Az=112.995 Ze=-45.195 Az status=0008 Ze status=0009 09:54:45 Check angles 09:54:45 SkyScan query 09:54:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.135<-16409 Statuses=0008 0009 09:54:46 Msec=1500 True Az=112.995 Ze=-66.135 Az status=0008 Ze status=0009 09:54:46 Check angles 09:54:46 SkyScan query 09:54:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.51<-17834 Statuses=0008 0009 09:54:47 Msec=2250 True Az=112.995 Ze=-87.51 Az status=0008 Ze status=0009 09:54:47 Check angles 09:54:47 SkyScan query 09:54:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.9<-19260 Statuses=0008 0009 09:54:47 Msec=3000 True Az=112.995 Ze=-108.9 Az status=0008 Ze status=0009 09:54:47 Check angles 09:54:47 SkyScan query 09:54:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.855<-20657 Statuses=0008 0009 09:54:48 Msec=3750 True Az=112.995 Ze=-129.855 Az status=0008 Ze status=0009 09:54:48 Check angles 09:54:48 SkyScan query 09:54:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.795<-22053 Statuses=0008 0009 09:54:49 Msec=4500 True Az=112.995 Ze=-150.795 Az status=0008 Ze status=0009 09:54:49 Check angles 09:54:49 SkyScan query 09:54:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0008 0009 09:54:50 Msec=5250 True Az=112.995 Ze=-171.495 Az status=0008 Ze status=0009 09:54:50 Check angles 09:54:50 SkyScan query 09:54:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:54:50 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:54:50 Message to Master queued w/err=0: serial=84063 error=0 09:54:55 Received message from Master: op=Filter serial=84064 09:54:55 Color wheel filter change from 0 to 0 09:54:55 FLIGetFilterPos err=0 currentPosition=0 09:54:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:55 Filter is already there-color wheel unchanged 09:54:55 Received message from Master: op=Shutter serial=84065 09:54:55 Shutter LASER open 09:54:56 Received message from Camera: op=State serial=84067 09:54:56 GetSingleValue result=40 Value=cccccccc 09:54:56 SkyScan query 09:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:54:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:56 Parameters OK 09:54:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:56 Set A/D data flow result=40 09:54:56 Set A/D channel type result=40 09:54:56 Set A/D encoding result=40 09:54:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:56 Set channel filter=0.000000e+000 result=40 09:54:56 Config A/D Result=40 09:54:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:56 Get A/D filter: -9.255963e+061 result=40 09:54:56 Get A/D value=-858993460 result=40 09:54:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:56 Parameters OK 09:54:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:56 Set A/D data flow result=40 09:54:56 Set A/D channel type result=40 09:54:56 Set A/D encoding result=40 09:54:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:56 Set channel filter=0.000000e+000 result=40 09:54:56 Config A/D Result=40 09:54:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:56 Get A/D filter: -9.255963e+061 result=40 09:54:56 Get A/D value=-858993460 result=40 09:54:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:56 Aux= 09:54:56 Message to Camera, serial 84067 queued 09:55:05 Received message from Master: op=Shutter serial=84077 09:55:05 Shutter LASER close 09:55:05 Received message from Master: op=PointingHead serial=84081 09:55:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:55:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:55:06 Point started: ret=0 09:55:06 point_skyscan result=0 09:55:06 Check angles 09:55:06 SkyScan query 09:55:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 09:55:07 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 09:55:07 Check angles 09:55:07 SkyScan query 09:55:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 09:55:08 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 09:55:08 Check angles 09:55:08 SkyScan query 09:55:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 09:55:09 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 09:55:09 Check angles 09:55:09 SkyScan query 09:55:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 09:55:09 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 09:55:09 Check angles 09:55:09 SkyScan query 09:55:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.815<-15921 Statuses=0008 0009 09:55:10 Msec=3000 True Az=112.995 Ze=-58.815 Az status=0008 Ze status=0009 09:55:10 Check angles 09:55:10 SkyScan query 09:55:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 09:55:11 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 09:55:11 Check angles 09:55:11 SkyScan query 09:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 09:55:12 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 09:55:12 Check angles 09:55:12 SkyScan query 09:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=4.425<-11705 Statuses=0008 0009 09:55:12 Msec=5250 True Az=112.995 Ze=4.425 Az status=0008 Ze status=0009 09:55:12 Check angles 09:55:12 SkyScan query 09:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:55:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:55:13 Message to Master queued w/err=0: serial=84081 error=0 09:55:18 Received message from Master: op=Filter serial=84082 09:55:18 Color wheel filter change from 0 to 0 09:55:18 FLIGetFilterPos err=0 currentPosition=0 09:55:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:18 Filter is already there-color wheel unchanged 09:55:18 Received message from Master: op=Shutter serial=84083 09:55:18 Shutter LASER close 09:55:18 Received message from Camera: op=State serial=84085 09:55:18 GetSingleValue result=40 Value=cccccccc 09:55:18 SkyScan query 09:55:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:55:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:19 Parameters OK 09:55:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:19 Set A/D data flow result=40 09:55:19 Set A/D channel type result=40 09:55:19 Set A/D encoding result=40 09:55:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:19 Set channel filter=0.000000e+000 result=40 09:55:19 Config A/D Result=40 09:55:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:19 Get A/D filter: -9.255963e+061 result=40 09:55:19 Get A/D value=-858993460 result=40 09:55:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:19 Parameters OK 09:55:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:19 Set A/D data flow result=40 09:55:19 Set A/D channel type result=40 09:55:19 Set A/D encoding result=40 09:55:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:19 Set channel filter=0.000000e+000 result=40 09:55:19 Config A/D Result=40 09:55:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:19 Get A/D filter: -9.255963e+061 result=40 09:55:19 Get A/D value=-858993460 result=40 09:55:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:19 Aux= 09:55:19 Message to Camera, serial 84085 queued 09:55:56 Received message from Master: op=PointingHead serial=84098 09:55:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:55:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:55:56 Point started: ret=0 09:55:56 point_skyscan result=0 09:55:57 Check angles 09:55:57 SkyScan query 09:55:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:55:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:55:57 Message to Master queued w/err=0: serial=84098 error=0 09:56:02 Received message from Master: op=Filter serial=84099 09:56:02 Color wheel filter change from 0 to 0 09:56:02 FLIGetFilterPos err=0 currentPosition=0 09:56:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:02 Filter is already there-color wheel unchanged 09:56:03 Received message from Master: op=Shutter serial=84100 09:56:03 Shutter LASER close 09:56:03 Received message from Camera: op=State serial=84102 09:56:03 GetSingleValue result=40 Value=cccccccc 09:56:03 SkyScan query 09:56:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:56:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:03 Parameters OK 09:56:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:03 Set A/D data flow result=40 09:56:03 Set A/D channel type result=40 09:56:03 Set A/D encoding result=40 09:56:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:03 Set channel filter=0.000000e+000 result=40 09:56:03 Config A/D Result=40 09:56:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:03 Get A/D filter: -9.255963e+061 result=40 09:56:03 Get A/D value=-858993460 result=40 09:56:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:03 Parameters OK 09:56:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:03 Set A/D data flow result=40 09:56:03 Set A/D channel type result=40 09:56:03 Set A/D encoding result=40 09:56:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:03 Set channel filter=0.000000e+000 result=40 09:56:03 Config A/D Result=40 09:56:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:03 Get A/D filter: -9.255963e+061 result=40 09:56:03 Get A/D value=-858993460 result=40 09:56:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:03 Aux= 09:56:03 Message to Camera, serial 84102 queued 09:56:40 Received message from Master: op=PointingHead serial=84115 09:56:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:56:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:56:40 Point started: ret=0 09:56:40 point_skyscan result=0 09:56:41 Check angles 09:56:41 SkyScan query 09:56:42 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 09:56:42 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 09:56:42 Check angles 09:56:42 SkyScan query 09:56:43 SkyScan query done: ret=0 az=153.63<-10242 ze=-6.495<-12433 Statuses=0009 0008 09:56:43 Msec=750 True Az=153.63 Ze=-6.495 Az status=0009 Ze status=0008 09:56:43 Check angles 09:56:43 SkyScan query 09:56:43 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.495<-12433 Statuses=0009 0008 09:56:43 Msec=1500 True Az=171.15 Ze=-6.495 Az status=0009 Ze status=0008 09:56:43 Check angles 09:56:43 SkyScan query 09:56:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:56:44 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:56:44 Message to Master queued w/err=0: serial=84115 error=0 09:56:49 Received message from Master: op=Filter serial=84116 09:56:49 Color wheel filter change from 0 to 0 09:56:49 FLIGetFilterPos err=0 currentPosition=0 09:56:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:49 Filter is already there-color wheel unchanged 09:56:49 Received message from Master: op=Shutter serial=84117 09:56:49 Shutter LASER close 09:56:49 Received message from Camera: op=State serial=84119 09:56:49 GetSingleValue result=40 Value=cccccccc 09:56:49 SkyScan query 09:56:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:56:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:50 Parameters OK 09:56:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:50 Set A/D data flow result=40 09:56:50 Set A/D channel type result=40 09:56:50 Set A/D encoding result=40 09:56:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:50 Set channel filter=0.000000e+000 result=40 09:56:50 Config A/D Result=40 09:56:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:50 Get A/D filter: -9.255963e+061 result=40 09:56:50 Get A/D value=-858993460 result=40 09:56:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:50 Parameters OK 09:56:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:50 Set A/D data flow result=40 09:56:50 Set A/D channel type result=40 09:56:50 Set A/D encoding result=40 09:56:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:50 Set channel filter=0.000000e+000 result=40 09:56:50 Config A/D Result=40 09:56:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:50 Get A/D filter: -9.255963e+061 result=40 09:56:50 Get A/D value=-858993460 result=40 09:56:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:50 Aux= 09:56:50 Message to Camera, serial 84119 queued 09:57:27 Received message from Master: op=PointingHead serial=84132 09:57:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:57:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:57:27 Point started: ret=0 09:57:27 point_skyscan result=0 09:57:28 Check angles 09:57:28 SkyScan query 09:57:28 SkyScan query done: ret=0 az=153.255<-10217 ze=6.51<-11566 Statuses=0009 0008 09:57:28 Msec=0 True Az=153.255 Ze=6.51 Az status=0009 Ze status=0008 09:57:28 Check angles 09:57:28 SkyScan query 09:57:29 SkyScan query done: ret=0 az=135.72<-9048 ze=6.495<-11567 Statuses=0009 0008 09:57:29 Msec=750 True Az=135.72 Ze=6.495 Az status=0009 Ze status=0008 09:57:29 Check angles 09:57:29 SkyScan query 09:57:30 SkyScan query done: ret=0 az=118.23<-7882 ze=6.495<-11567 Statuses=0009 0008 09:57:30 Msec=1500 True Az=118.23 Ze=6.495 Az status=0009 Ze status=0008 09:57:30 Check angles 09:57:30 SkyScan query 09:57:31 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 09:57:31 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 09:57:31 Message to Master queued w/err=0: serial=84132 error=0 09:57:36 Received message from Master: op=Filter serial=84133 09:57:36 Color wheel filter change from 0 to 0 09:57:36 FLIGetFilterPos err=0 currentPosition=0 09:57:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:36 Filter is already there-color wheel unchanged 09:57:36 Received message from Master: op=Shutter serial=84134 09:57:36 Shutter LASER close 09:57:36 Received message from Camera: op=State serial=84136 09:57:36 GetSingleValue result=40 Value=cccccccc 09:57:36 SkyScan query 09:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:57:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:36 Parameters OK 09:57:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:36 Set A/D data flow result=40 09:57:36 Set A/D channel type result=40 09:57:36 Set A/D encoding result=40 09:57:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:36 Set channel filter=0.000000e+000 result=40 09:57:36 Config A/D Result=40 09:57:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:36 Get A/D filter: -9.255963e+061 result=40 09:57:36 Get A/D value=-858993460 result=40 09:57:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:36 Parameters OK 09:57:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:36 Set A/D data flow result=40 09:57:36 Set A/D channel type result=40 09:57:36 Set A/D encoding result=40 09:57:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:36 Set channel filter=0.000000e+000 result=40 09:57:36 Config A/D Result=40 09:57:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:36 Get A/D filter: -9.255963e+061 result=40 09:57:36 Get A/D value=-858993460 result=40 09:57:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:36 Aux= 09:57:36 Message to Camera, serial 84136 queued 09:58:13 Received message from Master: op=PointingHead serial=84149 09:58:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:58:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:58:14 Point started: ret=0 09:58:14 point_skyscan result=0 09:58:14 Check angles 09:58:14 SkyScan query 09:58:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.85<-13590 Statuses=0008 0009 09:58:15 Msec=0 True Az=112.995 Ze=-23.85 Az status=0008 Ze status=0009 09:58:15 Check angles 09:58:15 SkyScan query 09:58:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 09:58:16 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 09:58:16 Check angles 09:58:16 SkyScan query 09:58:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 09:58:16 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 09:58:17 Check angles 09:58:17 SkyScan query 09:58:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 09:58:17 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 09:58:17 Check angles 09:58:17 SkyScan query 09:58:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.075<-19205 Statuses=0008 0009 09:58:18 Msec=3000 True Az=112.995 Ze=-108.075 Az status=0008 Ze status=0009 09:58:18 Check angles 09:58:18 SkyScan query 09:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.45<-20630 Statuses=0008 0009 09:58:19 Msec=3750 True Az=112.995 Ze=-129.45 Az status=0008 Ze status=0009 09:58:19 Check angles 09:58:19 SkyScan query 09:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.825<-22055 Statuses=0008 0009 09:58:19 Msec=4500 True Az=112.995 Ze=-150.825 Az status=0008 Ze status=0009 09:58:20 Check angles 09:58:20 SkyScan query 09:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0008 0009 09:58:20 Msec=5250 True Az=112.995 Ze=-171.51 Az status=0008 Ze status=0009 09:58:20 Check angles 09:58:20 SkyScan query 09:58:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:58:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:58:21 Message to Master queued w/err=0: serial=84149 error=0 09:58:26 Received message from Master: op=Filter serial=84150 09:58:26 Color wheel filter change from 0 to 0 09:58:26 FLIGetFilterPos err=0 currentPosition=0 09:58:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:26 Filter is already there-color wheel unchanged 09:58:26 Received message from Master: op=Shutter serial=84151 09:58:26 Shutter LASER open 09:58:26 Received message from Camera: op=State serial=84153 09:58:26 GetSingleValue result=40 Value=cccccccc 09:58:26 SkyScan query 09:58:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:58:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:27 Parameters OK 09:58:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:27 Set A/D data flow result=40 09:58:27 Set A/D channel type result=40 09:58:27 Set A/D encoding result=40 09:58:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:27 Set channel filter=0.000000e+000 result=40 09:58:27 Config A/D Result=40 09:58:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:27 Get A/D filter: -9.255963e+061 result=40 09:58:27 Get A/D value=-858993460 result=40 09:58:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:27 Parameters OK 09:58:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:27 Set A/D data flow result=40 09:58:27 Set A/D channel type result=40 09:58:27 Set A/D encoding result=40 09:58:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:27 Set channel filter=0.000000e+000 result=40 09:58:27 Config A/D Result=40 09:58:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:27 Get A/D filter: -9.255963e+061 result=40 09:58:27 Get A/D value=-858993460 result=40 09:58:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:27 Aux= 09:58:27 Message to Camera, serial 84153 queued 09:58:35 Received message from Master: op=Shutter serial=84163 09:58:35 Shutter LASER close 09:58:36 Received message from Master: op=PointingHead serial=84167 09:58:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:58:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:58:36 Point started: ret=0 09:58:36 point_skyscan result=0 09:58:37 Check angles 09:58:37 SkyScan query 09:58:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 09:58:37 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 09:58:38 Check angles 09:58:38 SkyScan query 09:58:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 09:58:38 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 09:58:38 Check angles 09:58:38 SkyScan query 09:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.755<-18717 Statuses=0008 0009 09:58:39 Msec=1500 True Az=112.995 Ze=-100.755 Az status=0008 Ze status=0009 09:58:39 Check angles 09:58:39 SkyScan query 09:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.8<-17320 Statuses=0008 0009 09:58:40 Msec=2250 True Az=112.995 Ze=-79.8 Az status=0008 Ze status=0009 09:58:40 Check angles 09:58:40 SkyScan query 09:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.86<-15924 Statuses=0008 0009 09:58:40 Msec=3000 True Az=112.995 Ze=-58.86 Az status=0008 Ze status=0009 09:58:41 Check angles 09:58:41 SkyScan query 09:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.455<-14497 Statuses=0008 0009 09:58:41 Msec=3750 True Az=112.995 Ze=-37.455 Az status=0008 Ze status=0009 09:58:41 Check angles 09:58:41 SkyScan query 09:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.035<-13069 Statuses=0008 0009 09:58:42 Msec=4500 True Az=112.995 Ze=-16.035 Az status=0008 Ze status=0009 09:58:42 Check angles 09:58:42 SkyScan query 09:58:43 SkyScan query done: ret=0 az=112.995<-7533 ze=4.725<-11685 Statuses=0008 0009 09:58:43 Msec=5250 True Az=112.995 Ze=4.725 Az status=0008 Ze status=0009 09:58:43 Check angles 09:58:43 SkyScan query 09:58:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:58:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:58:43 Message to Master queued w/err=0: serial=84167 error=0 09:58:48 Received message from Master: op=Filter serial=84168 09:58:48 Color wheel filter change from 0 to 0 09:58:48 FLIGetFilterPos err=0 currentPosition=0 09:58:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:48 Filter is already there-color wheel unchanged 09:58:49 Received message from Master: op=Shutter serial=84169 09:58:49 Shutter LASER close 09:58:49 Received message from Camera: op=State serial=84171 09:58:49 GetSingleValue result=40 Value=cccccccc 09:58:49 SkyScan query 09:58:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:58:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:49 Parameters OK 09:58:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:49 Set A/D data flow result=40 09:58:49 Set A/D channel type result=40 09:58:49 Set A/D encoding result=40 09:58:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:49 Set channel filter=0.000000e+000 result=40 09:58:49 Config A/D Result=40 09:58:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:49 Get A/D filter: -9.255963e+061 result=40 09:58:49 Get A/D value=-858993460 result=40 09:58:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:49 Parameters OK 09:58:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:49 Set A/D data flow result=40 09:58:49 Set A/D channel type result=40 09:58:49 Set A/D encoding result=40 09:58:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:49 Set channel filter=0.000000e+000 result=40 09:58:49 Config A/D Result=40 09:58:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:49 Get A/D filter: -9.255963e+061 result=40 09:58:49 Get A/D value=-858993460 result=40 09:58:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:49 Aux= 09:58:49 Message to Camera, serial 84171 queued 09:59:26 Received message from Master: op=PointingHead serial=84184 09:59:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:59:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:59:27 Point started: ret=0 09:59:27 point_skyscan result=0 09:59:27 Check angles 09:59:27 SkyScan query 09:59:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:59:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:59:28 Message to Master queued w/err=0: serial=84184 error=0 09:59:33 Received message from Master: op=Filter serial=84185 09:59:33 Color wheel filter change from 0 to 0 09:59:33 FLIGetFilterPos err=0 currentPosition=0 09:59:33 FLIGetStepsRemaining err=0 RemainingSteps=0 09:59:33 Filter is already there-color wheel unchanged 09:59:33 Received message from Master: op=Shutter serial=84186 09:59:33 Shutter LASER close 09:59:33 Received message from Camera: op=State serial=84188 09:59:33 GetSingleValue result=40 Value=cccccccc 09:59:33 SkyScan query 09:59:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:59:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:34 Parameters OK 09:59:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:34 Set A/D data flow result=40 09:59:34 Set A/D channel type result=40 09:59:34 Set A/D encoding result=40 09:59:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:34 Set channel filter=0.000000e+000 result=40 09:59:34 Config A/D Result=40 09:59:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:34 Get A/D filter: -9.255963e+061 result=40 09:59:34 Get A/D value=-858993460 result=40 09:59:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:34 Parameters OK 09:59:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:34 Set A/D data flow result=40 09:59:34 Set A/D channel type result=40 09:59:34 Set A/D encoding result=40 09:59:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:34 Set channel filter=0.000000e+000 result=40 09:59:34 Config A/D Result=40 09:59:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:34 Get A/D filter: -9.255963e+061 result=40 09:59:34 Get A/D value=-858993460 result=40 09:59:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:34 Aux= 09:59:34 Message to Camera, serial 84188 queued 10:00:10 Received message from Master: op=PointingHead serial=84200 10:00:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:00:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:00:10 Point started: ret=0 10:00:10 point_skyscan result=0 10:00:11 Check angles 10:00:11 SkyScan query 10:00:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:00:11 Message to Master queued w/err=0: serial=84200 error=0 10:00:16 Received message from Master: op=Filter serial=84201 10:00:16 Color wheel filter change from 0 to 0 10:00:16 FLIGetFilterPos err=0 currentPosition=0 10:00:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:16 Filter is already there-color wheel unchanged 10:00:16 Received message from Master: op=Shutter serial=84202 10:00:16 Shutter LASER close 10:00:16 Received message from Camera: op=State serial=84204 10:00:16 GetSingleValue result=40 Value=cccccccc 10:00:16 SkyScan query 10:00:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:17 Parameters OK 10:00:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:17 Set A/D data flow result=40 10:00:17 Set A/D channel type result=40 10:00:17 Set A/D encoding result=40 10:00:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:17 Set channel filter=0.000000e+000 result=40 10:00:17 Config A/D Result=40 10:00:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:17 Get A/D filter: -9.255963e+061 result=40 10:00:17 Get A/D value=-858993460 result=40 10:00:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:17 Parameters OK 10:00:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:17 Set A/D data flow result=40 10:00:17 Set A/D channel type result=40 10:00:17 Set A/D encoding result=40 10:00:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:17 Set channel filter=0.000000e+000 result=40 10:00:17 Config A/D Result=40 10:00:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:17 Get A/D filter: -9.255963e+061 result=40 10:00:17 Get A/D value=-858993460 result=40 10:00:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:17 Aux= 10:00:17 Message to Camera, serial 84204 queued 10:00:54 Received message from Master: op=PointingHead serial=84217 10:00:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:00:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:00:54 Point started: ret=0 10:00:54 point_skyscan result=0 10:00:55 Check angles 10:00:55 SkyScan query 10:00:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:00:56 Message to Master queued w/err=0: serial=84217 error=0 10:01:01 Received message from Master: op=Filter serial=84218 10:01:01 Color wheel filter change from 0 to 0 10:01:01 FLIGetFilterPos err=0 currentPosition=0 10:01:01 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:01 Filter is already there-color wheel unchanged 10:01:01 Received message from Master: op=Shutter serial=84219 10:01:01 Shutter LASER close 10:01:01 Received message from Camera: op=State serial=84221 10:01:01 GetSingleValue result=40 Value=cccccccc 10:01:01 SkyScan query 10:01:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:01:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:01 Parameters OK 10:01:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:01 Set A/D data flow result=40 10:01:01 Set A/D channel type result=40 10:01:01 Set A/D encoding result=40 10:01:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:01 Set channel filter=0.000000e+000 result=40 10:01:01 Config A/D Result=40 10:01:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:01 Get A/D filter: -9.255963e+061 result=40 10:01:01 Get A/D value=-858993460 result=40 10:01:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:01 Parameters OK 10:01:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:01 Set A/D data flow result=40 10:01:01 Set A/D channel type result=40 10:01:01 Set A/D encoding result=40 10:01:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:01 Set channel filter=0.000000e+000 result=40 10:01:01 Config A/D Result=40 10:01:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:01 Get A/D filter: -9.255963e+061 result=40 10:01:01 Get A/D value=-858993460 result=40 10:01:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:01 Aux= 10:01:01 Message to Camera, serial 84221 queued 10:01:38 Received message from Master: op=PointingHead serial=84234 10:01:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:01:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:01:39 Point started: ret=0 10:01:39 point_skyscan result=0 10:01:39 Check angles 10:01:39 SkyScan query 10:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 10:01:40 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 10:01:40 Check angles 10:01:40 SkyScan query 10:01:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 10:01:41 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 10:01:41 Check angles 10:01:41 SkyScan query 10:01:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.135<-16409 Statuses=0008 0009 10:01:41 Msec=1500 True Az=112.995 Ze=-66.135 Az status=0008 Ze status=0009 10:01:42 Check angles 10:01:42 SkyScan query 10:01:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.075<-17805 Statuses=0008 0009 10:01:42 Msec=2250 True Az=112.995 Ze=-87.075 Az status=0008 Ze status=0009 10:01:42 Check angles 10:01:42 SkyScan query 10:01:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.045<-19203 Statuses=0008 0009 10:01:43 Msec=3000 True Az=112.995 Ze=-108.045 Az status=0008 Ze status=0009 10:01:43 Check angles 10:01:43 SkyScan query 10:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.97<-20598 Statuses=0008 0009 10:01:44 Msec=3750 True Az=112.995 Ze=-128.97 Az status=0008 Ze status=0009 10:01:44 Check angles 10:01:44 SkyScan query 10:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.955<-21997 Statuses=0008 0009 10:01:44 Msec=4500 True Az=112.995 Ze=-149.955 Az status=0008 Ze status=0009 10:01:45 Check angles 10:01:45 SkyScan query 10:01:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.15<-23410 Statuses=0008 0009 10:01:45 Msec=5250 True Az=112.995 Ze=-171.15 Az status=0008 Ze status=0009 10:01:45 Check angles 10:01:45 SkyScan query 10:01:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:01:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:01:46 Message to Master queued w/err=0: serial=84234 error=0 10:01:51 Received message from Master: op=Filter serial=84235 10:01:51 Color wheel filter change from 0 to 0 10:01:51 FLIGetFilterPos err=0 currentPosition=0 10:01:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:51 Filter is already there-color wheel unchanged 10:01:51 Received message from Master: op=Shutter serial=84236 10:01:51 Shutter LASER open 10:01:51 Received message from Camera: op=State serial=84238 10:01:51 GetSingleValue result=40 Value=cccccccc 10:01:51 SkyScan query 10:01:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:01:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:52 Parameters OK 10:01:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:52 Set A/D data flow result=40 10:01:52 Set A/D channel type result=40 10:01:52 Set A/D encoding result=40 10:01:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:52 Set channel filter=0.000000e+000 result=40 10:01:52 Config A/D Result=40 10:01:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:52 Get A/D filter: -9.255963e+061 result=40 10:01:52 Get A/D value=-858993460 result=40 10:01:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:52 Parameters OK 10:01:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:52 Set A/D data flow result=40 10:01:52 Set A/D channel type result=40 10:01:52 Set A/D encoding result=40 10:01:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:52 Set channel filter=0.000000e+000 result=40 10:01:52 Config A/D Result=40 10:01:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:52 Get A/D filter: -9.255963e+061 result=40 10:01:52 Get A/D value=-858993460 result=40 10:01:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:52 Aux= 10:01:52 Message to Camera, serial 84238 queued 10:02:00 Received message from Master: op=Shutter serial=84248 10:02:00 Shutter LASER close 10:02:01 Received message from Master: op=PointingHead serial=84252 10:02:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:02:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:02:01 Point started: ret=0 10:02:01 point_skyscan result=0 10:02:02 Check angles 10:02:02 SkyScan query 10:02:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 10:02:02 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 10:02:03 Check angles 10:02:03 SkyScan query 10:02:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 10:02:03 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 10:02:03 Check angles 10:02:03 SkyScan query 10:02:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.34<-18756 Statuses=0008 0009 10:02:04 Msec=1500 True Az=112.995 Ze=-101.34 Az status=0008 Ze status=0009 10:02:04 Check angles 10:02:04 SkyScan query 10:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.37<-17358 Statuses=0008 0009 10:02:05 Msec=2250 True Az=112.995 Ze=-80.37 Az status=0008 Ze status=0009 10:02:05 Check angles 10:02:05 SkyScan query 10:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.415<-15961 Statuses=0008 0009 10:02:05 Msec=3000 True Az=112.995 Ze=-59.415 Az status=0008 Ze status=0009 10:02:06 Check angles 10:02:06 SkyScan query 10:02:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.46<-14564 Statuses=0008 0009 10:02:06 Msec=3750 True Az=112.995 Ze=-38.46 Az status=0008 Ze status=0009 10:02:06 Check angles 10:02:06 SkyScan query 10:02:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.07<-13138 Statuses=0008 0009 10:02:07 Msec=4500 True Az=112.995 Ze=-17.07 Az status=0008 Ze status=0009 10:02:07 Check angles 10:02:07 SkyScan query 10:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=3.885<-11741 Statuses=0008 0009 10:02:08 Msec=5250 True Az=112.995 Ze=3.885 Az status=0008 Ze status=0009 10:02:08 Check angles 10:02:08 SkyScan query 10:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:02:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:02:08 Message to Master queued w/err=0: serial=84252 error=0 10:02:13 Received message from Master: op=Filter serial=84253 10:02:13 Color wheel filter change from 0 to 0 10:02:13 FLIGetFilterPos err=0 currentPosition=0 10:02:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:13 Filter is already there-color wheel unchanged 10:02:14 Received message from Master: op=Shutter serial=84254 10:02:14 Shutter LASER close 10:02:14 Received message from Camera: op=State serial=84256 10:02:14 GetSingleValue result=40 Value=cccccccc 10:02:14 SkyScan query 10:02:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:02:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:14 Parameters OK 10:02:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:14 Set A/D data flow result=40 10:02:14 Set A/D channel type result=40 10:02:14 Set A/D encoding result=40 10:02:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:14 Set channel filter=0.000000e+000 result=40 10:02:14 Config A/D Result=40 10:02:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:14 Get A/D filter: -9.255963e+061 result=40 10:02:14 Get A/D value=-858993460 result=40 10:02:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:14 Parameters OK 10:02:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:14 Set A/D data flow result=40 10:02:14 Set A/D channel type result=40 10:02:14 Set A/D encoding result=40 10:02:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:14 Set channel filter=0.000000e+000 result=40 10:02:14 Config A/D Result=40 10:02:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:14 Get A/D filter: -9.255963e+061 result=40 10:02:14 Get A/D value=-858993460 result=40 10:02:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:14 Aux= 10:02:14 Message to Camera, serial 84256 queued 10:02:51 Received message from Master: op=PointingHead serial=84269 10:02:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:02:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:02:52 Point started: ret=0 10:02:52 point_skyscan result=0 10:02:52 Check angles 10:02:52 SkyScan query 10:02:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:02:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:02:53 Message to Master queued w/err=0: serial=84269 error=0 10:02:58 Received message from Master: op=Filter serial=84270 10:02:58 Color wheel filter change from 0 to 0 10:02:58 FLIGetFilterPos err=0 currentPosition=0 10:02:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:58 Filter is already there-color wheel unchanged 10:02:58 Received message from Master: op=Shutter serial=84271 10:02:58 Shutter LASER close 10:02:58 Received message from Camera: op=State serial=84273 10:02:58 GetSingleValue result=40 Value=cccccccc 10:02:58 SkyScan query 10:02:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:02:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:59 Parameters OK 10:02:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:59 Set A/D data flow result=40 10:02:59 Set A/D channel type result=40 10:02:59 Set A/D encoding result=40 10:02:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:59 Set channel filter=0.000000e+000 result=40 10:02:59 Config A/D Result=40 10:02:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:59 Get A/D filter: -9.255963e+061 result=40 10:02:59 Get A/D value=-858993460 result=40 10:02:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:59 Parameters OK 10:02:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:59 Set A/D data flow result=40 10:02:59 Set A/D channel type result=40 10:02:59 Set A/D encoding result=40 10:02:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:59 Set channel filter=0.000000e+000 result=40 10:02:59 Config A/D Result=40 10:02:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:59 Get A/D filter: -9.255963e+061 result=40 10:02:59 Get A/D value=-858993460 result=40 10:02:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:59 Aux= 10:02:59 Message to Camera, serial 84273 queued 10:03:36 Received message from Master: op=PointingHead serial=84286 10:03:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:03:36 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:03:36 Point started: ret=0 10:03:36 point_skyscan result=0 10:03:37 Check angles 10:03:37 SkyScan query 10:03:37 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 10:03:37 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 10:03:37 Check angles 10:03:37 SkyScan query 10:03:38 SkyScan query done: ret=0 az=154.17<-10278 ze=-6.495<-12433 Statuses=0009 0008 10:03:38 Msec=750 True Az=154.17 Ze=-6.495 Az status=0009 Ze status=0008 10:03:38 Received message from Master: op=Identify serial=84287 10:03:38 Check angles 10:03:38 SkyScan query 10:03:39 SkyScan query done: ret=0 az=171.96<-11464 ze=-6.495<-12433 Statuses=0009 0008 10:03:39 Msec=1500 True Az=171.96 Ze=-6.495 Az status=0009 Ze status=0008 10:03:39 Check angles 10:03:39 SkyScan query 10:03:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:03:40 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:03:40 Message to Master queued w/err=0: serial=84286 error=0 10:03:45 Received message from Master: op=Filter serial=84290 10:03:45 Color wheel filter change from 0 to 0 10:03:45 FLIGetFilterPos err=0 currentPosition=0 10:03:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:45 Filter is already there-color wheel unchanged 10:03:45 Received message from Master: op=Shutter serial=84291 10:03:45 Shutter LASER close 10:03:45 Received message from Camera: op=State serial=84293 10:03:45 GetSingleValue result=40 Value=cccccccc 10:03:45 SkyScan query 10:03:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:03:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:45 Parameters OK 10:03:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:45 Set A/D data flow result=40 10:03:45 Set A/D channel type result=40 10:03:45 Set A/D encoding result=40 10:03:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:45 Set channel filter=0.000000e+000 result=40 10:03:45 Config A/D Result=40 10:03:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:45 Get A/D filter: -9.255963e+061 result=40 10:03:45 Get A/D value=-858993460 result=40 10:03:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:45 Parameters OK 10:03:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:45 Set A/D data flow result=40 10:03:45 Set A/D channel type result=40 10:03:45 Set A/D encoding result=40 10:03:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:45 Set channel filter=0.000000e+000 result=40 10:03:45 Config A/D Result=40 10:03:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:45 Get A/D filter: -9.255963e+061 result=40 10:03:45 Get A/D value=-858993460 result=40 10:03:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:45 Aux= 10:03:45 Message to Camera, serial 84293 queued [UTC 2019-3-3 10:03:50] 10:04:22 Received message from Master: op=PointingHead serial=84306 10:04:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:04:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:04:23 Point started: ret=0 10:04:23 point_skyscan result=0 10:04:23 Check angles 10:04:23 SkyScan query 10:04:24 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 10:04:24 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 10:04:24 Check angles 10:04:24 SkyScan query 10:04:25 SkyScan query done: ret=0 az=135.495<-9033 ze=6.495<-11567 Statuses=0009 0008 10:04:25 Msec=750 True Az=135.495 Ze=6.495 Az status=0009 Ze status=0008 10:04:25 Check angles 10:04:25 SkyScan query 10:04:25 SkyScan query done: ret=0 az=117.99<-7866 ze=6.495<-11567 Statuses=0009 0008 10:04:25 Msec=1500 True Az=117.99 Ze=6.495 Az status=0009 Ze status=0008 10:04:26 Check angles 10:04:26 SkyScan query 10:04:26 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 10:04:26 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 10:04:26 Message to Master queued w/err=0: serial=84306 error=0 10:04:31 Received message from Master: op=Filter serial=84307 10:04:31 Color wheel filter change from 0 to 0 10:04:31 FLIGetFilterPos err=0 currentPosition=0 10:04:31 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:31 Filter is already there-color wheel unchanged 10:04:31 Received message from Master: op=Shutter serial=84308 10:04:31 Shutter LASER close 10:04:31 Received message from Camera: op=State serial=84310 10:04:31 GetSingleValue result=40 Value=cccccccc 10:04:31 SkyScan query 10:04:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:04:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:32 Parameters OK 10:04:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:32 Set A/D data flow result=40 10:04:32 Set A/D channel type result=40 10:04:32 Set A/D encoding result=40 10:04:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:32 Set channel filter=0.000000e+000 result=40 10:04:32 Config A/D Result=40 10:04:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:32 Get A/D filter: -9.255963e+061 result=40 10:04:32 Get A/D value=-858993460 result=40 10:04:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:32 Parameters OK 10:04:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:32 Set A/D data flow result=40 10:04:32 Set A/D channel type result=40 10:04:32 Set A/D encoding result=40 10:04:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:32 Set channel filter=0.000000e+000 result=40 10:04:32 Config A/D Result=40 10:04:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:32 Get A/D filter: -9.255963e+061 result=40 10:04:32 Get A/D value=-858993460 result=40 10:04:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:32 Aux= 10:04:32 Message to Camera, serial 84310 queued 10:05:09 Received message from Master: op=PointingHead serial=84323 10:05:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:05:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:05:09 Point started: ret=0 10:05:09 point_skyscan result=0 10:05:10 Check angles 10:05:10 SkyScan query 10:05:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 10:05:10 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 10:05:11 Check angles 10:05:11 SkyScan query 10:05:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 10:05:11 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 10:05:11 Check angles 10:05:11 SkyScan query 10:05:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.09<-16406 Statuses=0008 0009 10:05:12 Msec=1500 True Az=112.995 Ze=-66.09 Az status=0008 Ze status=0009 10:05:12 Check angles 10:05:12 SkyScan query 10:05:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.03<-17802 Statuses=0008 0009 10:05:13 Msec=2250 True Az=112.995 Ze=-87.03 Az status=0008 Ze status=0009 10:05:13 Check angles 10:05:13 SkyScan query 10:05:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.985<-19199 Statuses=0008 0009 10:05:13 Msec=3000 True Az=112.995 Ze=-107.985 Az status=0008 Ze status=0009 10:05:14 Check angles 10:05:14 SkyScan query 10:05:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.925<-20595 Statuses=0008 0009 10:05:14 Msec=3750 True Az=112.995 Ze=-128.925 Az status=0008 Ze status=0009 10:05:14 Check angles 10:05:14 SkyScan query 10:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.88<-21992 Statuses=0008 0009 10:05:15 Msec=4500 True Az=112.995 Ze=-149.88 Az status=0008 Ze status=0009 10:05:15 Check angles 10:05:15 SkyScan query 10:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 10:05:16 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 10:05:16 Check angles 10:05:16 SkyScan query 10:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:05:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:05:16 Message to Master queued w/err=0: serial=84323 error=0 10:05:21 Received message from Master: op=Filter serial=84324 10:05:21 Color wheel filter change from 0 to 0 10:05:21 FLIGetFilterPos err=0 currentPosition=0 10:05:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:21 Filter is already there-color wheel unchanged 10:05:22 Received message from Master: op=Shutter serial=84325 10:05:22 Shutter LASER open 10:05:22 Received message from Camera: op=State serial=84327 10:05:22 GetSingleValue result=40 Value=cccccccc 10:05:22 SkyScan query 10:05:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:05:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:22 Parameters OK 10:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:22 Set A/D data flow result=40 10:05:22 Set A/D channel type result=40 10:05:22 Set A/D encoding result=40 10:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:22 Set channel filter=0.000000e+000 result=40 10:05:22 Config A/D Result=40 10:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:22 Get A/D filter: -9.255963e+061 result=40 10:05:22 Get A/D value=-858993460 result=40 10:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:22 Parameters OK 10:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:22 Set A/D data flow result=40 10:05:22 Set A/D channel type result=40 10:05:22 Set A/D encoding result=40 10:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:22 Set channel filter=0.000000e+000 result=40 10:05:22 Config A/D Result=40 10:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:22 Get A/D filter: -9.255963e+061 result=40 10:05:22 Get A/D value=-858993460 result=40 10:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:22 Aux= 10:05:22 Message to Camera, serial 84327 queued 10:05:31 Received message from Master: op=Shutter serial=84337 10:05:31 Shutter LASER close 10:05:31 Received message from Master: op=PointingHead serial=84341 10:05:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:05:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:05:32 Point started: ret=0 10:05:32 point_skyscan result=0 10:05:32 Check angles 10:05:32 SkyScan query 10:05:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 10:05:33 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 10:05:33 Check angles 10:05:33 SkyScan query 10:05:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.92<-20128 Statuses=0008 0009 10:05:34 Msec=750 True Az=112.995 Ze=-121.92 Az status=0008 Ze status=0009 10:05:34 Check angles 10:05:34 SkyScan query 10:05:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.605<-18707 Statuses=0008 0009 10:05:34 Msec=1500 True Az=112.995 Ze=-100.605 Az status=0008 Ze status=0009 10:05:35 Check angles 10:05:35 SkyScan query 10:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 10:05:35 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 10:05:35 Check angles 10:05:35 SkyScan query 10:05:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.245<-15883 Statuses=0008 0009 10:05:36 Msec=3000 True Az=112.995 Ze=-58.245 Az status=0008 Ze status=0009 10:05:36 Check angles 10:05:36 SkyScan query 10:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.87<-14458 Statuses=0008 0009 10:05:37 Msec=3750 True Az=112.995 Ze=-36.87 Az status=0008 Ze status=0009 10:05:37 Check angles 10:05:37 SkyScan query 10:05:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.465<-13031 Statuses=0008 0009 10:05:38 Msec=4500 True Az=112.995 Ze=-15.465 Az status=0008 Ze status=0009 10:05:38 Check angles 10:05:38 SkyScan query 10:05:38 SkyScan query done: ret=0 az=112.995<-7533 ze=5.145<-11657 Statuses=0008 0009 10:05:38 Msec=5250 True Az=112.995 Ze=5.145 Az status=0008 Ze status=0009 10:05:38 Check angles 10:05:38 SkyScan query 10:05:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:05:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:05:39 Message to Master queued w/err=0: serial=84341 error=0 10:05:44 Received message from Master: op=Filter serial=84342 10:05:44 Color wheel filter change from 0 to 0 10:05:44 FLIGetFilterPos err=0 currentPosition=0 10:05:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:44 Filter is already there-color wheel unchanged 10:05:44 Received message from Master: op=Shutter serial=84343 10:05:44 Shutter LASER close 10:05:44 Received message from Camera: op=State serial=84345 10:05:44 GetSingleValue result=40 Value=cccccccc 10:05:44 SkyScan query 10:05:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:05:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:45 Parameters OK 10:05:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:45 Set A/D data flow result=40 10:05:45 Set A/D channel type result=40 10:05:45 Set A/D encoding result=40 10:05:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:45 Set channel filter=0.000000e+000 result=40 10:05:45 Config A/D Result=40 10:05:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:45 Get A/D filter: -9.255963e+061 result=40 10:05:45 Get A/D value=-858993460 result=40 10:05:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:45 Parameters OK 10:05:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:45 Set A/D data flow result=40 10:05:45 Set A/D channel type result=40 10:05:45 Set A/D encoding result=40 10:05:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:45 Set channel filter=0.000000e+000 result=40 10:05:45 Config A/D Result=40 10:05:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:45 Get A/D filter: -9.255963e+061 result=40 10:05:45 Get A/D value=-858993460 result=40 10:05:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:45 Aux= 10:05:45 Message to Camera, serial 84345 queued 10:06:22 Received message from Master: op=PointingHead serial=84358 10:06:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:06:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:06:22 Point started: ret=0 10:06:22 point_skyscan result=0 10:06:23 Check angles 10:06:23 SkyScan query 10:06:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:06:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:06:23 Message to Master queued w/err=0: serial=84358 error=0 10:06:28 Received message from Master: op=Filter serial=84359 10:06:28 Color wheel filter change from 0 to 0 10:06:28 FLIGetFilterPos err=0 currentPosition=0 10:06:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:28 Filter is already there-color wheel unchanged 10:06:29 Received message from Master: op=Shutter serial=84360 10:06:29 Shutter LASER close 10:06:29 Received message from Camera: op=State serial=84362 10:06:29 GetSingleValue result=40 Value=cccccccc 10:06:29 SkyScan query 10:06:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:06:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:29 Parameters OK 10:06:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:29 Set A/D data flow result=40 10:06:29 Set A/D channel type result=40 10:06:29 Set A/D encoding result=40 10:06:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:29 Set channel filter=0.000000e+000 result=40 10:06:29 Config A/D Result=40 10:06:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:29 Get A/D filter: -9.255963e+061 result=40 10:06:29 Get A/D value=-858993460 result=40 10:06:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:29 Parameters OK 10:06:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:29 Set A/D data flow result=40 10:06:29 Set A/D channel type result=40 10:06:29 Set A/D encoding result=40 10:06:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:29 Set channel filter=0.000000e+000 result=40 10:06:29 Config A/D Result=40 10:06:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:29 Get A/D filter: -9.255963e+061 result=40 10:06:29 Get A/D value=-858993460 result=40 10:06:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:29 Aux= 10:06:29 Message to Camera, serial 84362 queued 10:07:06 Received message from Master: op=PointingHead serial=84375 10:07:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:07:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:07:06 Point started: ret=0 10:07:06 point_skyscan result=0 10:07:07 Check angles 10:07:07 SkyScan query 10:07:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:07:08 Message to Master queued w/err=0: serial=84375 error=0 10:07:13 Received message from Master: op=Filter serial=84376 10:07:13 Color wheel filter change from 0 to 0 10:07:13 FLIGetFilterPos err=0 currentPosition=0 10:07:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:13 Filter is already there-color wheel unchanged 10:07:13 Received message from Master: op=Shutter serial=84377 10:07:13 Shutter LASER close 10:07:13 Received message from Camera: op=State serial=84379 10:07:13 GetSingleValue result=40 Value=cccccccc 10:07:13 SkyScan query 10:07:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:14 Parameters OK 10:07:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:14 Set A/D data flow result=40 10:07:14 Set A/D channel type result=40 10:07:14 Set A/D encoding result=40 10:07:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:14 Set channel filter=0.000000e+000 result=40 10:07:14 Config A/D Result=40 10:07:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:14 Get A/D filter: -9.255963e+061 result=40 10:07:14 Get A/D value=-858993460 result=40 10:07:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:14 Parameters OK 10:07:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:14 Set A/D data flow result=40 10:07:14 Set A/D channel type result=40 10:07:14 Set A/D encoding result=40 10:07:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:14 Set channel filter=0.000000e+000 result=40 10:07:14 Config A/D Result=40 10:07:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:14 Get A/D filter: -9.255963e+061 result=40 10:07:14 Get A/D value=-858993460 result=40 10:07:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:14 Aux= 10:07:14 Message to Camera, serial 84379 queued 10:07:49 Received message from Master: op=PointingHead serial=84391 10:07:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:07:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:07:50 Point started: ret=0 10:07:50 point_skyscan result=0 10:07:51 Check angles 10:07:51 SkyScan query 10:07:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:07:51 Message to Master queued w/err=0: serial=84391 error=0 10:07:56 Received message from Master: op=Filter serial=84392 10:07:56 Color wheel filter change from 0 to 0 10:07:56 FLIGetFilterPos err=0 currentPosition=0 10:07:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:56 Filter is already there-color wheel unchanged 10:07:56 Received message from Master: op=Shutter serial=84393 10:07:56 Shutter LASER close 10:07:56 Received message from Camera: op=State serial=84395 10:07:56 GetSingleValue result=40 Value=cccccccc 10:07:56 SkyScan query 10:07:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:57 Parameters OK 10:07:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:57 Set A/D data flow result=40 10:07:57 Set A/D channel type result=40 10:07:57 Set A/D encoding result=40 10:07:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:57 Set channel filter=0.000000e+000 result=40 10:07:57 Config A/D Result=40 10:07:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:57 Get A/D filter: -9.255963e+061 result=40 10:07:57 Get A/D value=-858993460 result=40 10:07:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:57 Parameters OK 10:07:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:57 Set A/D data flow result=40 10:07:57 Set A/D channel type result=40 10:07:57 Set A/D encoding result=40 10:07:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:57 Set channel filter=0.000000e+000 result=40 10:07:57 Config A/D Result=40 10:07:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:57 Get A/D filter: -9.255963e+061 result=40 10:07:57 Get A/D value=-858993460 result=40 10:07:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:57 Aux= 10:07:57 Message to Camera, serial 84395 queued 10:08:34 Received message from Master: op=PointingHead serial=84408 10:08:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:08:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:08:34 Point started: ret=0 10:08:34 point_skyscan result=0 10:08:35 Check angles 10:08:35 SkyScan query 10:08:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 10:08:35 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 10:08:36 Check angles 10:08:36 SkyScan query 10:08:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 10:08:36 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 10:08:36 Check angles 10:08:36 SkyScan query 10:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.06<-16404 Statuses=0008 0009 10:08:37 Msec=1500 True Az=112.995 Ze=-66.06 Az status=0008 Ze status=0009 10:08:37 Check angles 10:08:37 SkyScan query 10:08:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-87<-17800 Statuses=0008 0009 10:08:38 Msec=2250 True Az=112.995 Ze=-87 Az status=0008 Ze status=0009 10:08:38 Check angles 10:08:38 SkyScan query 10:08:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 10:08:38 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 10:08:39 Check angles 10:08:39 SkyScan query 10:08:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.91<-20594 Statuses=0008 0009 10:08:39 Msec=3750 True Az=112.995 Ze=-128.91 Az status=0008 Ze status=0009 10:08:39 Check angles 10:08:39 SkyScan query 10:08:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.865<-21991 Statuses=0008 0009 10:08:40 Msec=4500 True Az=112.995 Ze=-149.865 Az status=0008 Ze status=0009 10:08:40 Check angles 10:08:40 SkyScan query 10:08:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0008 0009 10:08:41 Msec=5250 True Az=112.995 Ze=-171.105 Az status=0008 Ze status=0009 10:08:41 Check angles 10:08:41 SkyScan query 10:08:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:08:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:08:41 Message to Master queued w/err=0: serial=84408 error=0 10:08:46 Received message from Master: op=Filter serial=84409 10:08:46 Color wheel filter change from 0 to 0 10:08:46 FLIGetFilterPos err=0 currentPosition=0 10:08:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:46 Filter is already there-color wheel unchanged 10:08:47 Received message from Master: op=Shutter serial=84410 10:08:47 Shutter LASER open 10:08:47 Received message from Camera: op=State serial=84412 10:08:47 GetSingleValue result=40 Value=cccccccc 10:08:47 SkyScan query 10:08:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:08:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:47 Parameters OK 10:08:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:47 Set A/D data flow result=40 10:08:47 Set A/D channel type result=40 10:08:47 Set A/D encoding result=40 10:08:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:47 Set channel filter=0.000000e+000 result=40 10:08:47 Config A/D Result=40 10:08:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:47 Get A/D filter: -9.255963e+061 result=40 10:08:47 Get A/D value=-858993460 result=40 10:08:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:47 Parameters OK 10:08:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:47 Set A/D data flow result=40 10:08:47 Set A/D channel type result=40 10:08:47 Set A/D encoding result=40 10:08:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:47 Set channel filter=0.000000e+000 result=40 10:08:47 Config A/D Result=40 10:08:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:47 Get A/D filter: -9.255963e+061 result=40 10:08:47 Get A/D value=-858993460 result=40 10:08:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:47 Aux= 10:08:47 Message to Camera, serial 84412 queued 10:08:56 Received message from Master: op=Shutter serial=84422 10:08:56 Shutter LASER close 10:08:57 Received message from Master: op=PointingHead serial=84426 10:08:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:08:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:08:57 Point started: ret=0 10:08:57 point_skyscan result=0 10:08:58 Check angles 10:08:58 SkyScan query 10:08:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 10:08:58 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 10:08:58 Check angles 10:08:58 SkyScan query 10:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 10:08:59 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 10:08:59 Check angles 10:08:59 SkyScan query 10:09:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 10:09:00 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 10:09:00 Check angles 10:09:00 SkyScan query 10:09:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 10:09:00 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 10:09:01 Check angles 10:09:01 SkyScan query 10:09:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.995<-15933 Statuses=0008 0009 10:09:01 Msec=3000 True Az=112.995 Ze=-58.995 Az status=0008 Ze status=0009 10:09:01 Check angles 10:09:01 SkyScan query 10:09:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.59<-14506 Statuses=0008 0009 10:09:02 Msec=3750 True Az=112.995 Ze=-37.59 Az status=0008 Ze status=0009 10:09:02 Check angles 10:09:02 SkyScan query 10:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.605<-13107 Statuses=0008 0009 10:09:03 Msec=4500 True Az=112.995 Ze=-16.605 Az status=0008 Ze status=0009 10:09:03 Check angles 10:09:03 SkyScan query 10:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=4.29<-11714 Statuses=0008 0009 10:09:03 Msec=5250 True Az=112.995 Ze=4.29 Az status=0008 Ze status=0009 10:09:04 Check angles 10:09:04 SkyScan query 10:09:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:09:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:09:04 Message to Master queued w/err=0: serial=84426 error=0 10:09:09 Received message from Master: op=Filter serial=84427 10:09:09 Color wheel filter change from 0 to 0 10:09:09 FLIGetFilterPos err=0 currentPosition=0 10:09:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:09 Filter is already there-color wheel unchanged 10:09:09 Received message from Master: op=Shutter serial=84428 10:09:09 Shutter LASER close 10:09:10 Received message from Camera: op=State serial=84430 10:09:10 GetSingleValue result=40 Value=cccccccc 10:09:10 SkyScan query 10:09:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:09:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:10 Parameters OK 10:09:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:10 Set A/D data flow result=40 10:09:10 Set A/D channel type result=40 10:09:10 Set A/D encoding result=40 10:09:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:10 Set channel filter=0.000000e+000 result=40 10:09:10 Config A/D Result=40 10:09:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:10 Get A/D filter: -9.255963e+061 result=40 10:09:10 Get A/D value=-858993460 result=40 10:09:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:10 Parameters OK 10:09:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:10 Set A/D data flow result=40 10:09:10 Set A/D channel type result=40 10:09:10 Set A/D encoding result=40 10:09:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:10 Set channel filter=0.000000e+000 result=40 10:09:10 Config A/D Result=40 10:09:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:10 Get A/D filter: -9.255963e+061 result=40 10:09:10 Get A/D value=-858993460 result=40 10:09:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:10 Aux= 10:09:10 Message to Camera, serial 84430 queued 10:09:47 Received message from Master: op=PointingHead serial=84443 10:09:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:09:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:09:47 Point started: ret=0 10:09:47 point_skyscan result=0 10:09:48 Check angles 10:09:48 SkyScan query 10:09:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:09:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:09:49 Message to Master queued w/err=0: serial=84443 error=0 10:09:54 Received message from Master: op=Filter serial=84444 10:09:54 Color wheel filter change from 0 to 0 10:09:54 FLIGetFilterPos err=0 currentPosition=0 10:09:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:54 Filter is already there-color wheel unchanged 10:09:54 Received message from Master: op=Shutter serial=84445 10:09:54 Shutter LASER close 10:09:54 Received message from Camera: op=State serial=84447 10:09:54 GetSingleValue result=40 Value=cccccccc 10:09:54 SkyScan query 10:09:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:09:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:54 Parameters OK 10:09:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:54 Set A/D data flow result=40 10:09:54 Set A/D channel type result=40 10:09:54 Set A/D encoding result=40 10:09:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:54 Set channel filter=0.000000e+000 result=40 10:09:54 Config A/D Result=40 10:09:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:54 Get A/D filter: -9.255963e+061 result=40 10:09:54 Get A/D value=-858993460 result=40 10:09:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:54 Parameters OK 10:09:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:54 Set A/D data flow result=40 10:09:54 Set A/D channel type result=40 10:09:54 Set A/D encoding result=40 10:09:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:54 Set channel filter=0.000000e+000 result=40 10:09:54 Config A/D Result=40 10:09:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:54 Get A/D filter: -9.255963e+061 result=40 10:09:54 Get A/D value=-858993460 result=40 10:09:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:54 Aux= 10:09:54 Message to Camera, serial 84447 queued 10:10:31 Received message from Master: op=PointingHead serial=84460 10:10:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:10:31 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:10:32 Point started: ret=0 10:10:32 point_skyscan result=0 10:10:32 Check angles 10:10:32 SkyScan query 10:10:33 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 10:10:33 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 10:10:33 Check angles 10:10:33 SkyScan query 10:10:34 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.495<-12433 Statuses=0009 0008 10:10:34 Msec=750 True Az=153.495 Ze=-6.495 Az status=0009 Ze status=0008 10:10:34 Check angles 10:10:34 SkyScan query 10:10:34 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 10:10:34 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 10:10:35 Check angles 10:10:35 SkyScan query 10:10:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:10:35 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:10:35 Message to Master queued w/err=0: serial=84460 error=0 10:10:40 Received message from Master: op=Filter serial=84461 10:10:40 Color wheel filter change from 0 to 0 10:10:40 FLIGetFilterPos err=0 currentPosition=0 10:10:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:40 Filter is already there-color wheel unchanged 10:10:40 Received message from Master: op=Shutter serial=84462 10:10:40 Shutter LASER close 10:10:40 Received message from Camera: op=State serial=84464 10:10:40 GetSingleValue result=40 Value=cccccccc 10:10:40 SkyScan query 10:10:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:10:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:41 Parameters OK 10:10:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:41 Set A/D data flow result=40 10:10:41 Set A/D channel type result=40 10:10:41 Set A/D encoding result=40 10:10:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:41 Set channel filter=0.000000e+000 result=40 10:10:41 Config A/D Result=40 10:10:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:41 Get A/D filter: -9.255963e+061 result=40 10:10:41 Get A/D value=-858993460 result=40 10:10:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:41 Parameters OK 10:10:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:41 Set A/D data flow result=40 10:10:41 Set A/D channel type result=40 10:10:41 Set A/D encoding result=40 10:10:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:41 Set channel filter=0.000000e+000 result=40 10:10:41 Config A/D Result=40 10:10:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:41 Get A/D filter: -9.255963e+061 result=40 10:10:41 Get A/D value=-858993460 result=40 10:10:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:41 Aux= 10:10:41 Message to Camera, serial 84464 queued 10:11:18 Received message from Master: op=PointingHead serial=84477 10:11:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:11:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:11:18 Point started: ret=0 10:11:18 point_skyscan result=0 10:11:19 Check angles 10:11:19 SkyScan query 10:11:20 SkyScan query done: ret=0 az=152.58<-10172 ze=6.51<-11566 Statuses=0009 0008 10:11:20 Msec=0 True Az=152.58 Ze=6.51 Az status=0009 Ze status=0008 10:11:20 Check angles 10:11:20 SkyScan query 10:11:20 SkyScan query done: ret=0 az=135.12<-9008 ze=6.495<-11567 Statuses=0009 0008 10:11:20 Msec=750 True Az=135.12 Ze=6.495 Az status=0009 Ze status=0008 10:11:20 Check angles 10:11:20 SkyScan query 10:11:21 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 10:11:21 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 10:11:21 Check angles 10:11:21 SkyScan query 10:11:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:11:22 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:11:22 Message to Master queued w/err=0: serial=84477 error=0 10:11:27 Received message from Master: op=Filter serial=84478 10:11:27 Color wheel filter change from 0 to 0 10:11:27 FLIGetFilterPos err=0 currentPosition=0 10:11:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:27 Filter is already there-color wheel unchanged 10:11:27 Received message from Master: op=Shutter serial=84479 10:11:27 Shutter LASER close 10:11:27 Received message from Camera: op=State serial=84481 10:11:27 GetSingleValue result=40 Value=cccccccc 10:11:27 SkyScan query 10:11:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:11:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:28 Parameters OK 10:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:28 Set A/D data flow result=40 10:11:28 Set A/D channel type result=40 10:11:28 Set A/D encoding result=40 10:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:28 Set channel filter=0.000000e+000 result=40 10:11:28 Config A/D Result=40 10:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:28 Get A/D filter: -9.255963e+061 result=40 10:11:28 Get A/D value=-858993460 result=40 10:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:28 Parameters OK 10:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:28 Set A/D data flow result=40 10:11:28 Set A/D channel type result=40 10:11:28 Set A/D encoding result=40 10:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:28 Set channel filter=0.000000e+000 result=40 10:11:28 Config A/D Result=40 10:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:28 Get A/D filter: -9.255963e+061 result=40 10:11:28 Get A/D value=-858993460 result=40 10:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:28 Aux= 10:11:28 Message to Camera, serial 84481 queued 10:12:04 Received message from Master: op=PointingHead serial=84494 10:12:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:12:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:12:05 Point started: ret=0 10:12:05 point_skyscan result=0 10:12:06 Check angles 10:12:06 SkyScan query 10:12:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.76<-13584 Statuses=0008 0009 10:12:06 Msec=0 True Az=112.995 Ze=-23.76 Az status=0008 Ze status=0009 10:12:06 Check angles 10:12:06 SkyScan query 10:12:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.135<-15009 Statuses=0008 0009 10:12:07 Msec=750 True Az=112.995 Ze=-45.135 Az status=0008 Ze status=0009 10:12:07 Check angles 10:12:07 SkyScan query 10:12:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.105<-16407 Statuses=0008 0009 10:12:08 Msec=1500 True Az=112.995 Ze=-66.105 Az status=0008 Ze status=0009 10:12:08 Check angles 10:12:08 SkyScan query 10:12:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 10:12:08 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 10:12:09 Check angles 10:12:09 SkyScan query 10:12:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-108<-19200 Statuses=0008 0009 10:12:09 Msec=3000 True Az=112.995 Ze=-108 Az status=0008 Ze status=0009 10:12:09 Check angles 10:12:09 SkyScan query 10:12:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 10:12:10 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 10:12:10 Check angles 10:12:10 SkyScan query 10:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 10:12:11 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 10:12:11 Check angles 10:12:11 SkyScan query 10:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0008 0009 10:12:11 Msec=5250 True Az=112.995 Ze=-171.12 Az status=0008 Ze status=0009 10:12:12 Check angles 10:12:12 SkyScan query 10:12:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:12:12 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:12:12 Message to Master queued w/err=0: serial=84494 error=0 10:12:17 Received message from Master: op=Filter serial=84495 10:12:17 Color wheel filter change from 0 to 0 10:12:17 FLIGetFilterPos err=0 currentPosition=0 10:12:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:17 Filter is already there-color wheel unchanged 10:12:17 Received message from Master: op=Shutter serial=84496 10:12:17 Shutter LASER open 10:12:18 Received message from Camera: op=State serial=84498 10:12:18 GetSingleValue result=40 Value=cccccccc 10:12:18 SkyScan query 10:12:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:12:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:18 Parameters OK 10:12:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:18 Set A/D data flow result=40 10:12:18 Set A/D channel type result=40 10:12:18 Set A/D encoding result=40 10:12:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:18 Set channel filter=0.000000e+000 result=40 10:12:18 Config A/D Result=40 10:12:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:18 Get A/D filter: -9.255963e+061 result=40 10:12:18 Get A/D value=-858993460 result=40 10:12:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:18 Parameters OK 10:12:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:18 Set A/D data flow result=40 10:12:18 Set A/D channel type result=40 10:12:18 Set A/D encoding result=40 10:12:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:18 Set channel filter=0.000000e+000 result=40 10:12:18 Config A/D Result=40 10:12:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:18 Get A/D filter: -9.255963e+061 result=40 10:12:18 Get A/D value=-858993460 result=40 10:12:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:18 Aux= 10:12:18 Message to Camera, serial 84498 queued 10:12:27 Received message from Master: op=Shutter serial=84508 10:12:27 Shutter LASER close 10:12:27 Received message from Master: op=PointingHead serial=84512 10:12:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:12:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:12:27 Point started: ret=0 10:12:27 point_skyscan result=0 10:12:28 Check angles 10:12:28 SkyScan query 10:12:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 10:12:29 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 10:12:29 Check angles 10:12:29 SkyScan query 10:12:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.295<-20153 Statuses=0008 0009 10:12:29 Msec=750 True Az=112.995 Ze=-122.295 Az status=0008 Ze status=0009 10:12:30 Check angles 10:12:30 SkyScan query 10:12:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.34<-18756 Statuses=0008 0009 10:12:30 Msec=1500 True Az=112.995 Ze=-101.34 Az status=0008 Ze status=0009 10:12:30 Check angles 10:12:30 SkyScan query 10:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.385<-17359 Statuses=0008 0009 10:12:31 Msec=2250 True Az=112.995 Ze=-80.385 Az status=0008 Ze status=0009 10:12:31 Check angles 10:12:31 SkyScan query 10:12:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.445<-15963 Statuses=0008 0009 10:12:32 Msec=3000 True Az=112.995 Ze=-59.445 Az status=0008 Ze status=0009 10:12:32 Check angles 10:12:32 SkyScan query 10:12:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.46<-14564 Statuses=0008 0009 10:12:32 Msec=3750 True Az=112.995 Ze=-38.46 Az status=0008 Ze status=0009 10:12:33 Check angles 10:12:33 SkyScan query 10:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 10:12:33 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 10:12:33 Check angles 10:12:33 SkyScan query 10:12:34 SkyScan query done: ret=0 az=112.995<-7533 ze=3.885<-11741 Statuses=0008 0009 10:12:34 Msec=5250 True Az=112.995 Ze=3.885 Az status=0008 Ze status=0009 10:12:34 Check angles 10:12:34 SkyScan query 10:12:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:12:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:12:35 Message to Master queued w/err=0: serial=84512 error=0 10:12:40 Received message from Master: op=Filter serial=84513 10:12:40 Color wheel filter change from 0 to 0 10:12:40 FLIGetFilterPos err=0 currentPosition=0 10:12:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:40 Filter is already there-color wheel unchanged 10:12:40 Received message from Master: op=Shutter serial=84514 10:12:40 Shutter LASER close 10:12:40 Received message from Camera: op=State serial=84516 10:12:40 GetSingleValue result=40 Value=cccccccc 10:12:40 SkyScan query 10:12:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:12:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:41 Parameters OK 10:12:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:41 Set A/D data flow result=40 10:12:41 Set A/D channel type result=40 10:12:41 Set A/D encoding result=40 10:12:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:41 Set channel filter=0.000000e+000 result=40 10:12:41 Config A/D Result=40 10:12:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:41 Get A/D filter: -9.255963e+061 result=40 10:12:41 Get A/D value=-858993460 result=40 10:12:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:41 Parameters OK 10:12:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:41 Set A/D data flow result=40 10:12:41 Set A/D channel type result=40 10:12:41 Set A/D encoding result=40 10:12:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:41 Set channel filter=0.000000e+000 result=40 10:12:41 Config A/D Result=40 10:12:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:41 Get A/D filter: -9.255963e+061 result=40 10:12:41 Get A/D value=-858993460 result=40 10:12:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:41 Aux= 10:12:41 Message to Camera, serial 84516 queued 10:13:17 Received message from Master: op=PointingHead serial=84529 10:13:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:13:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:13:18 Point started: ret=0 10:13:18 point_skyscan result=0 10:13:19 Check angles 10:13:19 SkyScan query 10:13:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:13:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:13:19 Message to Master queued w/err=0: serial=84529 error=0 10:13:24 Received message from Master: op=Filter serial=84530 10:13:24 Color wheel filter change from 0 to 0 10:13:24 FLIGetFilterPos err=0 currentPosition=0 10:13:24 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:24 Filter is already there-color wheel unchanged 10:13:24 Received message from Master: op=Shutter serial=84531 10:13:24 Shutter LASER close 10:13:24 Received message from Camera: op=State serial=84533 10:13:24 GetSingleValue result=40 Value=cccccccc 10:13:24 SkyScan query 10:13:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:13:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:25 Parameters OK 10:13:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:25 Set A/D data flow result=40 10:13:25 Set A/D channel type result=40 10:13:25 Set A/D encoding result=40 10:13:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:25 Set channel filter=0.000000e+000 result=40 10:13:25 Config A/D Result=40 10:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:25 Get A/D filter: -9.255963e+061 result=40 10:13:25 Get A/D value=-858993460 result=40 10:13:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:25 Parameters OK 10:13:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:25 Set A/D data flow result=40 10:13:25 Set A/D channel type result=40 10:13:25 Set A/D encoding result=40 10:13:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:25 Set channel filter=0.000000e+000 result=40 10:13:25 Config A/D Result=40 10:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:25 Get A/D filter: -9.255963e+061 result=40 10:13:25 Get A/D value=-858993460 result=40 10:13:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:25 Aux= 10:13:25 Message to Camera, serial 84533 queued 10:14:01 Received message from Master: op=PointingHead serial=84545 10:14:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:14:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:14:01 Point started: ret=0 10:14:01 point_skyscan result=0 10:14:02 Check angles 10:14:02 SkyScan query 10:14:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:14:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:14:02 Message to Master queued w/err=0: serial=84545 error=0 10:14:07 Received message from Master: op=Filter serial=84546 10:14:07 Color wheel filter change from 0 to 0 10:14:07 FLIGetFilterPos err=0 currentPosition=0 10:14:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:07 Filter is already there-color wheel unchanged 10:14:08 Received message from Master: op=Shutter serial=84547 10:14:08 Shutter LASER close 10:14:08 Received message from Camera: op=State serial=84549 10:14:08 GetSingleValue result=40 Value=cccccccc 10:14:08 SkyScan query 10:14:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:14:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:08 Parameters OK 10:14:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:08 Set A/D data flow result=40 10:14:08 Set A/D channel type result=40 10:14:08 Set A/D encoding result=40 10:14:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:08 Set channel filter=0.000000e+000 result=40 10:14:08 Config A/D Result=40 10:14:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:08 Get A/D filter: -9.255963e+061 result=40 10:14:08 Get A/D value=-858993460 result=40 10:14:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:08 Parameters OK 10:14:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:08 Set A/D data flow result=40 10:14:08 Set A/D channel type result=40 10:14:08 Set A/D encoding result=40 10:14:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:08 Set channel filter=0.000000e+000 result=40 10:14:08 Config A/D Result=40 10:14:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:08 Get A/D filter: -9.255963e+061 result=40 10:14:08 Get A/D value=-858993460 result=40 10:14:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:08 Aux= 10:14:08 Message to Camera, serial 84549 queued [UTC 2019-3-3 10:14:45] 10:14:45 Received message from Master: op=PointingHead serial=84562 10:14:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:14:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:14:46 Point started: ret=0 10:14:46 point_skyscan result=0 10:14:46 Check angles 10:14:46 SkyScan query 10:14:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:14:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:14:47 Message to Master queued w/err=0: serial=84562 error=0 10:14:52 Received message from Master: op=Filter serial=84563 10:14:52 Color wheel filter change from 0 to 0 10:14:52 FLIGetFilterPos err=0 currentPosition=0 10:14:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:52 Filter is already there-color wheel unchanged 10:14:52 Received message from Master: op=Shutter serial=84564 10:14:52 Shutter LASER close 10:14:52 Received message from Camera: op=State serial=84566 10:14:52 GetSingleValue result=40 Value=cccccccc 10:14:52 SkyScan query 10:14:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:14:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:53 Parameters OK 10:14:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:53 Set A/D data flow result=40 10:14:53 Set A/D channel type result=40 10:14:53 Set A/D encoding result=40 10:14:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:53 Set channel filter=0.000000e+000 result=40 10:14:53 Config A/D Result=40 10:14:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:53 Get A/D filter: -9.255963e+061 result=40 10:14:53 Get A/D value=-858993460 result=40 10:14:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:53 Parameters OK 10:14:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:53 Set A/D data flow result=40 10:14:53 Set A/D channel type result=40 10:14:53 Set A/D encoding result=40 10:14:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:53 Set channel filter=0.000000e+000 result=40 10:14:53 Config A/D Result=40 10:14:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:53 Get A/D filter: -9.255963e+061 result=40 10:14:53 Get A/D value=-858993460 result=40 10:14:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:53 Aux= 10:14:53 Message to Camera, serial 84566 queued 10:15:29 Received message from Master: op=PointingHead serial=84579 10:15:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:15:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:15:30 Point started: ret=0 10:15:30 point_skyscan result=0 10:15:31 Check angles 10:15:31 SkyScan query 10:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 10:15:31 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 10:15:31 Check angles 10:15:31 SkyScan query 10:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.895<-14993 Statuses=0008 0009 10:15:32 Msec=750 True Az=112.995 Ze=-44.895 Az status=0008 Ze status=0009 10:15:32 Check angles 10:15:32 SkyScan query 10:15:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.85<-16390 Statuses=0008 0009 10:15:33 Msec=1500 True Az=112.995 Ze=-65.85 Az status=0008 Ze status=0009 10:15:33 Check angles 10:15:33 SkyScan query 10:15:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 10:15:33 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 10:15:34 Check angles 10:15:34 SkyScan query 10:15:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.745<-19183 Statuses=0008 0009 10:15:34 Msec=3000 True Az=112.995 Ze=-107.745 Az status=0008 Ze status=0009 10:15:34 Check angles 10:15:34 SkyScan query 10:15:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 10:15:35 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 10:15:35 Check angles 10:15:35 SkyScan query 10:15:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 10:15:36 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 10:15:36 Check angles 10:15:36 SkyScan query 10:15:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 10:15:36 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 10:15:37 Check angles 10:15:37 SkyScan query 10:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:15:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:15:37 Message to Master queued w/err=0: serial=84579 error=0 10:15:42 Received message from Master: op=Filter serial=84580 10:15:42 Color wheel filter change from 0 to 0 10:15:42 FLIGetFilterPos err=0 currentPosition=0 10:15:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:42 Filter is already there-color wheel unchanged 10:15:42 Received message from Master: op=Shutter serial=84581 10:15:42 Shutter LASER open 10:15:43 Received message from Camera: op=State serial=84583 10:15:43 GetSingleValue result=40 Value=cccccccc 10:15:43 SkyScan query 10:15:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:15:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:43 Parameters OK 10:15:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:43 Set A/D data flow result=40 10:15:43 Set A/D channel type result=40 10:15:43 Set A/D encoding result=40 10:15:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:43 Set channel filter=0.000000e+000 result=40 10:15:43 Config A/D Result=40 10:15:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:43 Get A/D filter: -9.255963e+061 result=40 10:15:43 Get A/D value=-858993460 result=40 10:15:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:43 Parameters OK 10:15:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:43 Set A/D data flow result=40 10:15:43 Set A/D channel type result=40 10:15:43 Set A/D encoding result=40 10:15:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:43 Set channel filter=0.000000e+000 result=40 10:15:43 Config A/D Result=40 10:15:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:43 Get A/D filter: -9.255963e+061 result=40 10:15:43 Get A/D value=-858993460 result=40 10:15:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:43 Aux= 10:15:43 Message to Camera, serial 84583 queued 10:15:52 Received message from Master: op=Shutter serial=84593 10:15:52 Shutter LASER close 10:15:52 Received message from Master: op=PointingHead serial=84597 10:15:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:15:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:15:52 Point started: ret=0 10:15:52 point_skyscan result=0 10:15:53 Check angles 10:15:53 SkyScan query 10:15:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 10:15:54 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 10:15:54 Check angles 10:15:54 SkyScan query 10:15:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 10:15:55 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 10:15:55 Check angles 10:15:55 SkyScan query 10:15:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 10:15:55 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 10:15:55 Check angles 10:15:55 SkyScan query 10:15:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 10:15:56 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 10:15:56 Check angles 10:15:56 SkyScan query 10:15:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 10:15:57 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 10:15:57 Check angles 10:15:57 SkyScan query 10:15:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 10:15:58 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 10:15:58 Check angles 10:15:58 SkyScan query 10:15:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 10:15:58 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 10:15:58 Check angles 10:15:58 SkyScan query 10:15:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.305<-11713 Statuses=0008 0009 10:15:59 Msec=5250 True Az=112.995 Ze=4.305 Az status=0008 Ze status=0009 10:15:59 Check angles 10:15:59 SkyScan query 10:16:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:16:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:16:00 Message to Master queued w/err=0: serial=84597 error=0 10:16:05 Received message from Master: op=Filter serial=84598 10:16:05 Color wheel filter change from 0 to 0 10:16:05 FLIGetFilterPos err=0 currentPosition=0 10:16:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:05 Filter is already there-color wheel unchanged 10:16:05 Received message from Master: op=Shutter serial=84599 10:16:05 Shutter LASER close 10:16:05 Received message from Camera: op=State serial=84601 10:16:05 GetSingleValue result=40 Value=cccccccc 10:16:05 SkyScan query 10:16:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:16:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:06 Parameters OK 10:16:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:06 Set A/D data flow result=40 10:16:06 Set A/D channel type result=40 10:16:06 Set A/D encoding result=40 10:16:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:06 Set channel filter=0.000000e+000 result=40 10:16:06 Config A/D Result=40 10:16:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:06 Get A/D filter: -9.255963e+061 result=40 10:16:06 Get A/D value=-858993460 result=40 10:16:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:06 Parameters OK 10:16:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:06 Set A/D data flow result=40 10:16:06 Set A/D channel type result=40 10:16:06 Set A/D encoding result=40 10:16:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:06 Set channel filter=0.000000e+000 result=40 10:16:06 Config A/D Result=40 10:16:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:06 Get A/D filter: -9.255963e+061 result=40 10:16:06 Get A/D value=-858993460 result=40 10:16:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:06 Aux= 10:16:06 Message to Camera, serial 84601 queued 10:16:43 Received message from Master: op=PointingHead serial=84614 10:16:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:16:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:16:43 Point started: ret=0 10:16:43 point_skyscan result=0 10:16:44 Check angles 10:16:44 SkyScan query 10:16:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:16:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:16:44 Message to Master queued w/err=0: serial=84614 error=0 10:16:49 Received message from Master: op=Filter serial=84615 10:16:49 Color wheel filter change from 0 to 0 10:16:49 FLIGetFilterPos err=0 currentPosition=0 10:16:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:49 Filter is already there-color wheel unchanged 10:16:49 Received message from Master: op=Shutter serial=84616 10:16:49 Shutter LASER close 10:16:49 Received message from Camera: op=State serial=84618 10:16:49 GetSingleValue result=40 Value=cccccccc 10:16:49 SkyScan query 10:16:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:16:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:50 Parameters OK 10:16:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:50 Set A/D data flow result=40 10:16:50 Set A/D channel type result=40 10:16:50 Set A/D encoding result=40 10:16:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:50 Set channel filter=0.000000e+000 result=40 10:16:50 Config A/D Result=40 10:16:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:50 Get A/D filter: -9.255963e+061 result=40 10:16:50 Get A/D value=-858993460 result=40 10:16:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:50 Parameters OK 10:16:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:50 Set A/D data flow result=40 10:16:50 Set A/D channel type result=40 10:16:50 Set A/D encoding result=40 10:16:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:50 Set channel filter=0.000000e+000 result=40 10:16:50 Config A/D Result=40 10:16:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:50 Get A/D filter: -9.255963e+061 result=40 10:16:50 Get A/D value=-858993460 result=40 10:16:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:50 Aux= 10:16:50 Message to Camera, serial 84618 queued 10:17:27 Received message from Master: op=PointingHead serial=84631 10:17:27 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:17:27 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:17:27 Point started: ret=0 10:17:27 point_skyscan result=0 10:17:28 Check angles 10:17:28 SkyScan query 10:17:29 SkyScan query done: ret=0 az=135.825<-9055 ze=-6.51<-12434 Statuses=0009 0008 10:17:29 Msec=0 True Az=135.825 Ze=-6.51 Az status=0009 Ze status=0008 10:17:29 Check angles 10:17:29 SkyScan query 10:17:29 SkyScan query done: ret=0 az=153.675<-10245 ze=-6.495<-12433 Statuses=0009 0008 10:17:29 Msec=750 True Az=153.675 Ze=-6.495 Az status=0009 Ze status=0008 10:17:29 Check angles 10:17:29 SkyScan query 10:17:30 SkyScan query done: ret=0 az=171.435<-11429 ze=-6.495<-12433 Statuses=0009 0008 10:17:30 Msec=1500 True Az=171.435 Ze=-6.495 Az status=0009 Ze status=0008 10:17:30 Check angles 10:17:30 SkyScan query 10:17:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:17:31 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:17:31 Message to Master queued w/err=0: serial=84631 error=0 10:17:36 Received message from Master: op=Filter serial=84632 10:17:36 Color wheel filter change from 0 to 0 10:17:36 FLIGetFilterPos err=0 currentPosition=0 10:17:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:36 Filter is already there-color wheel unchanged 10:17:36 Received message from Master: op=Shutter serial=84633 10:17:36 Shutter LASER close 10:17:36 Received message from Camera: op=State serial=84635 10:17:36 GetSingleValue result=40 Value=cccccccc 10:17:36 SkyScan query 10:17:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:17:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:37 Parameters OK 10:17:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:37 Set A/D data flow result=40 10:17:37 Set A/D channel type result=40 10:17:37 Set A/D encoding result=40 10:17:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:37 Set channel filter=0.000000e+000 result=40 10:17:37 Config A/D Result=40 10:17:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:37 Get A/D filter: -9.255963e+061 result=40 10:17:37 Get A/D value=-858993460 result=40 10:17:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:37 Parameters OK 10:17:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:37 Set A/D data flow result=40 10:17:37 Set A/D channel type result=40 10:17:37 Set A/D encoding result=40 10:17:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:37 Set channel filter=0.000000e+000 result=40 10:17:37 Config A/D Result=40 10:17:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:37 Get A/D filter: -9.255963e+061 result=40 10:17:37 Get A/D value=-858993460 result=40 10:17:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:37 Aux= 10:17:37 Message to Camera, serial 84635 queued 10:18:13 Received message from Master: op=PointingHead serial=84648 10:18:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:18:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:18:14 Point started: ret=0 10:18:14 point_skyscan result=0 10:18:15 Check angles 10:18:15 SkyScan query 10:18:15 SkyScan query done: ret=0 az=152.67<-10178 ze=6.51<-11566 Statuses=0009 0008 10:18:15 Msec=0 True Az=152.67 Ze=6.51 Az status=0009 Ze status=0008 10:18:15 Check angles 10:18:15 SkyScan query 10:18:16 SkyScan query done: ret=0 az=135.18<-9012 ze=6.495<-11567 Statuses=0009 0008 10:18:16 Msec=750 True Az=135.18 Ze=6.495 Az status=0009 Ze status=0008 10:18:16 Check angles 10:18:16 SkyScan query 10:18:17 SkyScan query done: ret=0 az=117.72<-7848 ze=6.495<-11567 Statuses=0009 0008 10:18:17 Msec=1500 True Az=117.72 Ze=6.495 Az status=0009 Ze status=0008 10:18:17 Check angles 10:18:17 SkyScan query 10:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:18:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:18:17 Message to Master queued w/err=0: serial=84648 error=0 10:18:22 Received message from Master: op=Filter serial=84649 10:18:22 Color wheel filter change from 0 to 0 10:18:22 FLIGetFilterPos err=0 currentPosition=0 10:18:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:22 Filter is already there-color wheel unchanged 10:18:23 Received message from Master: op=Shutter serial=84650 10:18:23 Shutter LASER close 10:18:23 Received message from Camera: op=State serial=84652 10:18:23 GetSingleValue result=40 Value=cccccccc 10:18:23 SkyScan query 10:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:18:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:23 Parameters OK 10:18:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:23 Set A/D data flow result=40 10:18:23 Set A/D channel type result=40 10:18:23 Set A/D encoding result=40 10:18:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:23 Set channel filter=0.000000e+000 result=40 10:18:23 Config A/D Result=40 10:18:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:23 Get A/D filter: -9.255963e+061 result=40 10:18:23 Get A/D value=-858993460 result=40 10:18:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:23 Parameters OK 10:18:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:23 Set A/D data flow result=40 10:18:23 Set A/D channel type result=40 10:18:23 Set A/D encoding result=40 10:18:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:23 Set channel filter=0.000000e+000 result=40 10:18:23 Config A/D Result=40 10:18:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:23 Get A/D filter: -9.255963e+061 result=40 10:18:23 Get A/D value=-858993460 result=40 10:18:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:23 Aux= 10:18:23 Message to Camera, serial 84652 queued 10:19:00 Received message from Master: op=PointingHead serial=84665 10:19:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:19:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:19:00 Point started: ret=0 10:19:00 point_skyscan result=0 10:19:01 Check angles 10:19:01 SkyScan query 10:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 10:19:02 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 10:19:02 Check angles 10:19:02 SkyScan query 10:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 10:19:02 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 10:19:03 Check angles 10:19:03 SkyScan query 10:19:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 10:19:03 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 10:19:03 Check angles 10:19:03 SkyScan query 10:19:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 10:19:04 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 10:19:04 Check angles 10:19:04 SkyScan query 10:19:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.565<-19171 Statuses=0008 0009 10:19:05 Msec=3000 True Az=112.995 Ze=-107.565 Az status=0008 Ze status=0009 10:19:05 Check angles 10:19:05 SkyScan query 10:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.925<-20595 Statuses=0008 0009 10:19:06 Msec=3750 True Az=112.995 Ze=-128.925 Az status=0008 Ze status=0009 10:19:06 Check angles 10:19:06 SkyScan query 10:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.345<-22023 Statuses=0008 0009 10:19:06 Msec=4500 True Az=112.995 Ze=-150.345 Az status=0008 Ze status=0009 10:19:06 Check angles 10:19:06 SkyScan query 10:19:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0008 0009 10:19:07 Msec=5250 True Az=112.995 Ze=-171.12 Az status=0008 Ze status=0009 10:19:07 Check angles 10:19:07 SkyScan query 10:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:19:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:19:08 Message to Master queued w/err=0: serial=84665 error=0 10:19:13 Received message from Master: op=Filter serial=84666 10:19:13 Color wheel filter change from 0 to 0 10:19:13 FLIGetFilterPos err=0 currentPosition=0 10:19:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:13 Filter is already there-color wheel unchanged 10:19:13 Received message from Master: op=Shutter serial=84667 10:19:13 Shutter LASER open 10:19:13 Received message from Camera: op=State serial=84669 10:19:13 GetSingleValue result=40 Value=cccccccc 10:19:13 SkyScan query 10:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:14 Parameters OK 10:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:14 Set A/D data flow result=40 10:19:14 Set A/D channel type result=40 10:19:14 Set A/D encoding result=40 10:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:14 Set channel filter=0.000000e+000 result=40 10:19:14 Config A/D Result=40 10:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:14 Get A/D filter: -9.255963e+061 result=40 10:19:14 Get A/D value=-858993460 result=40 10:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:14 Parameters OK 10:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:14 Set A/D data flow result=40 10:19:14 Set A/D channel type result=40 10:19:14 Set A/D encoding result=40 10:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:14 Set channel filter=0.000000e+000 result=40 10:19:14 Config A/D Result=40 10:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:14 Get A/D filter: -9.255963e+061 result=40 10:19:14 Get A/D value=-858993460 result=40 10:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:14 Aux= 10:19:14 Message to Camera, serial 84669 queued 10:19:22 Received message from Master: op=Shutter serial=84679 10:19:22 Shutter LASER close 10:19:23 Received message from Master: op=PointingHead serial=84683 10:19:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:19:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:19:23 Point started: ret=0 10:19:23 point_skyscan result=0 10:19:24 Check angles 10:19:24 SkyScan query 10:19:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 10:19:24 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 10:19:24 Check angles 10:19:24 SkyScan query 10:19:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.535<-20169 Statuses=0008 0009 10:19:25 Msec=750 True Az=112.995 Ze=-122.535 Az status=0008 Ze status=0009 10:19:25 Check angles 10:19:25 SkyScan query 10:19:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 10:19:26 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 10:19:26 Check angles 10:19:26 SkyScan query 10:19:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 10:19:26 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 10:19:27 Check angles 10:19:27 SkyScan query 10:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 10:19:27 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 10:19:27 Check angles 10:19:27 SkyScan query 10:19:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.815<-14521 Statuses=0008 0009 10:19:28 Msec=3750 True Az=112.995 Ze=-37.815 Az status=0008 Ze status=0009 10:19:28 Check angles 10:19:28 SkyScan query 10:19:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.425<-13095 Statuses=0008 0009 10:19:29 Msec=4500 True Az=112.995 Ze=-16.425 Az status=0008 Ze status=0009 10:19:29 Check angles 10:19:29 SkyScan query 10:19:30 SkyScan query done: ret=0 az=112.995<-7533 ze=4.44<-11704 Statuses=0008 0009 10:19:30 Msec=5250 True Az=112.995 Ze=4.44 Az status=0008 Ze status=0009 10:19:30 Check angles 10:19:30 SkyScan query 10:19:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:19:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:19:30 Message to Master queued w/err=0: serial=84683 error=0 10:19:35 Received message from Master: op=Filter serial=84684 10:19:35 Color wheel filter change from 0 to 0 10:19:35 FLIGetFilterPos err=0 currentPosition=0 10:19:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:35 Filter is already there-color wheel unchanged 10:19:35 Received message from Master: op=Shutter serial=84685 10:19:35 Shutter LASER close 10:19:36 Received message from Camera: op=State serial=84687 10:19:36 GetSingleValue result=40 Value=cccccccc 10:19:36 SkyScan query 10:19:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:19:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:36 Parameters OK 10:19:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:36 Set A/D data flow result=40 10:19:36 Set A/D channel type result=40 10:19:36 Set A/D encoding result=40 10:19:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:36 Set channel filter=0.000000e+000 result=40 10:19:36 Config A/D Result=40 10:19:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:36 Get A/D filter: -9.255963e+061 result=40 10:19:36 Get A/D value=-858993460 result=40 10:19:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:36 Parameters OK 10:19:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:36 Set A/D data flow result=40 10:19:36 Set A/D channel type result=40 10:19:36 Set A/D encoding result=40 10:19:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:36 Set channel filter=0.000000e+000 result=40 10:19:36 Config A/D Result=40 10:19:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:36 Get A/D filter: -9.255963e+061 result=40 10:19:36 Get A/D value=-858993460 result=40 10:19:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:36 Aux= 10:19:36 Message to Camera, serial 84687 queued 10:20:13 Received message from Master: op=PointingHead serial=84700 10:20:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:20:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:20:13 Point started: ret=0 10:20:13 point_skyscan result=0 10:20:14 Check angles 10:20:14 SkyScan query 10:20:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:20:15 Message to Master queued w/err=0: serial=84700 error=0 10:20:20 Received message from Master: op=Filter serial=84701 10:20:20 Color wheel filter change from 0 to 0 10:20:20 FLIGetFilterPos err=0 currentPosition=0 10:20:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:20 Filter is already there-color wheel unchanged 10:20:20 Received message from Master: op=Shutter serial=84702 10:20:20 Shutter LASER close 10:20:20 Received message from Camera: op=State serial=84704 10:20:20 GetSingleValue result=40 Value=cccccccc 10:20:20 SkyScan query 10:20:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:20 Parameters OK 10:20:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:20 Set A/D data flow result=40 10:20:20 Set A/D channel type result=40 10:20:20 Set A/D encoding result=40 10:20:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:20 Set channel filter=0.000000e+000 result=40 10:20:20 Config A/D Result=40 10:20:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:20 Get A/D filter: -9.255963e+061 result=40 10:20:20 Get A/D value=-858993460 result=40 10:20:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:20 Parameters OK 10:20:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:20 Set A/D data flow result=40 10:20:20 Set A/D channel type result=40 10:20:20 Set A/D encoding result=40 10:20:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:20 Set channel filter=0.000000e+000 result=40 10:20:20 Config A/D Result=40 10:20:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:20 Get A/D filter: -9.255963e+061 result=40 10:20:20 Get A/D value=-858993460 result=40 10:20:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:20 Aux= 10:20:20 Message to Camera, serial 84704 queued 10:20:57 Received message from Master: op=PointingHead serial=84717 10:20:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:20:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:20:58 Point started: ret=0 10:20:58 point_skyscan result=0 10:20:58 Check angles 10:20:58 SkyScan query 10:20:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:20:59 Message to Master queued w/err=0: serial=84717 error=0 10:21:04 Received message from Master: op=Filter serial=84718 10:21:04 Color wheel filter change from 0 to 0 10:21:04 FLIGetFilterPos err=0 currentPosition=0 10:21:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:04 Filter is already there-color wheel unchanged 10:21:04 Received message from Master: op=Shutter serial=84719 10:21:04 Shutter LASER close 10:21:04 Received message from Camera: op=State serial=84721 10:21:04 GetSingleValue result=40 Value=cccccccc 10:21:04 SkyScan query 10:21:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:21:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:05 Parameters OK 10:21:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:05 Set A/D data flow result=40 10:21:05 Set A/D channel type result=40 10:21:05 Set A/D encoding result=40 10:21:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:05 Set channel filter=0.000000e+000 result=40 10:21:05 Config A/D Result=40 10:21:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:05 Get A/D filter: -9.255963e+061 result=40 10:21:05 Get A/D value=-858993460 result=40 10:21:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:05 Parameters OK 10:21:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:05 Set A/D data flow result=40 10:21:05 Set A/D channel type result=40 10:21:05 Set A/D encoding result=40 10:21:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:05 Set channel filter=0.000000e+000 result=40 10:21:05 Config A/D Result=40 10:21:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:05 Get A/D filter: -9.255963e+061 result=40 10:21:05 Get A/D value=-858993460 result=40 10:21:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:05 Aux= 10:21:05 Message to Camera, serial 84721 queued 10:21:42 Received message from Master: op=PointingHead serial=84734 10:21:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:21:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:21:42 Point started: ret=0 10:21:42 point_skyscan result=0 10:21:43 Check angles 10:21:43 SkyScan query 10:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:21:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:21:43 Message to Master queued w/err=0: serial=84734 error=0 10:21:48 Received message from Master: op=Filter serial=84735 10:21:48 Color wheel filter change from 0 to 0 10:21:48 FLIGetFilterPos err=0 currentPosition=0 10:21:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:48 Filter is already there-color wheel unchanged 10:21:48 Received message from Master: op=Shutter serial=84736 10:21:48 Shutter LASER close 10:21:49 Received message from Camera: op=State serial=84738 10:21:49 GetSingleValue result=40 Value=cccccccc 10:21:49 SkyScan query 10:21:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:21:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:49 Parameters OK 10:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:49 Set A/D data flow result=40 10:21:49 Set A/D channel type result=40 10:21:49 Set A/D encoding result=40 10:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:49 Set channel filter=0.000000e+000 result=40 10:21:49 Config A/D Result=40 10:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:49 Get A/D filter: -9.255963e+061 result=40 10:21:49 Get A/D value=-858993460 result=40 10:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:49 Parameters OK 10:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:49 Set A/D data flow result=40 10:21:49 Set A/D channel type result=40 10:21:49 Set A/D encoding result=40 10:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:49 Set channel filter=0.000000e+000 result=40 10:21:49 Config A/D Result=40 10:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:49 Get A/D filter: -9.255963e+061 result=40 10:21:49 Get A/D value=-858993460 result=40 10:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:49 Aux= 10:21:49 Message to Camera, serial 84738 queued 10:22:26 Received message from Master: op=PointingHead serial=84751 10:22:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:22:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:22:26 Point started: ret=0 10:22:26 point_skyscan result=0 10:22:27 Check angles 10:22:27 SkyScan query 10:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 10:22:28 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 10:22:28 Check angles 10:22:28 SkyScan query 10:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 10:22:28 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 10:22:29 Check angles 10:22:29 SkyScan query 10:22:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.045<-16403 Statuses=0008 0009 10:22:29 Msec=1500 True Az=112.995 Ze=-66.045 Az status=0008 Ze status=0009 10:22:29 Check angles 10:22:29 SkyScan query 10:22:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.985<-17799 Statuses=0008 0009 10:22:30 Msec=2250 True Az=112.995 Ze=-86.985 Az status=0008 Ze status=0009 10:22:30 Check angles 10:22:30 SkyScan query 10:22:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 10:22:31 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 10:22:31 Check angles 10:22:31 SkyScan query 10:22:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.345<-20623 Statuses=0008 0009 10:22:31 Msec=3750 True Az=112.995 Ze=-129.345 Az status=0008 Ze status=0009 10:22:32 Check angles 10:22:32 SkyScan query 10:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.3<-22020 Statuses=0008 0009 10:22:32 Msec=4500 True Az=112.995 Ze=-150.3 Az status=0008 Ze status=0009 10:22:32 Check angles 10:22:32 SkyScan query 10:22:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.09<-23406 Statuses=0008 0009 10:22:33 Msec=5250 True Az=112.995 Ze=-171.09 Az status=0008 Ze status=0009 10:22:33 Check angles 10:22:33 SkyScan query 10:22:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:22:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:22:34 Message to Master queued w/err=0: serial=84751 error=0 10:22:39 Received message from Master: op=Filter serial=84752 10:22:39 Color wheel filter change from 0 to 0 10:22:39 FLIGetFilterPos err=0 currentPosition=0 10:22:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:39 Filter is already there-color wheel unchanged 10:22:39 Received message from Master: op=Shutter serial=84753 10:22:39 Shutter LASER open 10:22:39 Received message from Camera: op=State serial=84755 10:22:39 GetSingleValue result=40 Value=cccccccc 10:22:39 SkyScan query 10:22:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:22:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:40 Parameters OK 10:22:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:40 Set A/D data flow result=40 10:22:40 Set A/D channel type result=40 10:22:40 Set A/D encoding result=40 10:22:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:40 Set channel filter=0.000000e+000 result=40 10:22:40 Config A/D Result=40 10:22:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:40 Get A/D filter: -9.255963e+061 result=40 10:22:40 Get A/D value=-858993460 result=40 10:22:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:40 Parameters OK 10:22:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:40 Set A/D data flow result=40 10:22:40 Set A/D channel type result=40 10:22:40 Set A/D encoding result=40 10:22:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:40 Set channel filter=0.000000e+000 result=40 10:22:40 Config A/D Result=40 10:22:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:40 Get A/D filter: -9.255963e+061 result=40 10:22:40 Get A/D value=-858993460 result=40 10:22:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:40 Aux= 10:22:40 Message to Camera, serial 84755 queued 10:22:48 Received message from Master: op=Shutter serial=84765 10:22:48 Shutter LASER close 10:22:49 Received message from Master: op=PointingHead serial=84769 10:22:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:22:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:22:49 Point started: ret=0 10:22:49 point_skyscan result=0 10:22:50 Check angles 10:22:50 SkyScan query 10:22:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 10:22:50 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 10:22:51 Check angles 10:22:51 SkyScan query 10:22:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.41<-20094 Statuses=0008 0009 10:22:51 Msec=750 True Az=112.995 Ze=-121.41 Az status=0008 Ze status=0009 10:22:51 Check angles 10:22:51 SkyScan query 10:22:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 10:22:52 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 10:22:52 Check angles 10:22:52 SkyScan query 10:22:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.485<-17299 Statuses=0008 0009 10:22:53 Msec=2250 True Az=112.995 Ze=-79.485 Az status=0008 Ze status=0009 10:22:53 Check angles 10:22:53 SkyScan query 10:22:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.53<-15902 Statuses=0008 0009 10:22:53 Msec=3000 True Az=112.995 Ze=-58.53 Az status=0008 Ze status=0009 10:22:54 Check angles 10:22:54 SkyScan query 10:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.59<-14506 Statuses=0008 0009 10:22:54 Msec=3750 True Az=112.995 Ze=-37.59 Az status=0008 Ze status=0009 10:22:54 Check angles 10:22:54 SkyScan query 10:22:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.62<-13108 Statuses=0008 0009 10:22:55 Msec=4500 True Az=112.995 Ze=-16.62 Az status=0008 Ze status=0009 10:22:55 Check angles 10:22:55 SkyScan query 10:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.275<-11715 Statuses=0008 0009 10:22:56 Msec=5250 True Az=112.995 Ze=4.275 Az status=0008 Ze status=0009 10:22:56 Check angles 10:22:56 SkyScan query 10:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:22:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:22:56 Message to Master queued w/err=0: serial=84769 error=0 10:23:01 Received message from Master: op=Filter serial=84770 10:23:01 Color wheel filter change from 0 to 0 10:23:01 FLIGetFilterPos err=0 currentPosition=0 10:23:01 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:01 Filter is already there-color wheel unchanged 10:23:02 Received message from Master: op=Shutter serial=84771 10:23:02 Shutter LASER close 10:23:02 Received message from Camera: op=State serial=84773 10:23:02 GetSingleValue result=40 Value=cccccccc 10:23:02 SkyScan query 10:23:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:23:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:02 Parameters OK 10:23:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:02 Set A/D data flow result=40 10:23:02 Set A/D channel type result=40 10:23:02 Set A/D encoding result=40 10:23:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:02 Set channel filter=0.000000e+000 result=40 10:23:02 Config A/D Result=40 10:23:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:02 Get A/D filter: -9.255963e+061 result=40 10:23:02 Get A/D value=-858993460 result=40 10:23:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:02 Parameters OK 10:23:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:02 Set A/D data flow result=40 10:23:02 Set A/D channel type result=40 10:23:02 Set A/D encoding result=40 10:23:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:02 Set channel filter=0.000000e+000 result=40 10:23:02 Config A/D Result=40 10:23:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:02 Get A/D filter: -9.255963e+061 result=40 10:23:02 Get A/D value=-858993460 result=40 10:23:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:02 Aux= 10:23:02 Message to Camera, serial 84773 queued 10:23:38 Received message from Master: op=PointingHead serial=84785 10:23:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:23:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:23:39 Point started: ret=0 10:23:39 point_skyscan result=0 10:23:39 Check angles 10:23:39 SkyScan query 10:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:23:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:23:40 Message to Master queued w/err=0: serial=84785 error=0 10:23:45 Received message from Master: op=Filter serial=84786 10:23:45 Color wheel filter change from 0 to 0 10:23:45 FLIGetFilterPos err=0 currentPosition=0 10:23:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:45 Filter is already there-color wheel unchanged 10:23:45 Received message from Master: op=Shutter serial=84787 10:23:45 Shutter LASER close 10:23:45 Received message from Camera: op=State serial=84789 10:23:45 GetSingleValue result=40 Value=cccccccc 10:23:45 SkyScan query 10:23:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:23:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:46 Parameters OK 10:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:46 Set A/D data flow result=40 10:23:46 Set A/D channel type result=40 10:23:46 Set A/D encoding result=40 10:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:46 Set channel filter=0.000000e+000 result=40 10:23:46 Config A/D Result=40 10:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:46 Get A/D filter: -9.255963e+061 result=40 10:23:46 Get A/D value=-858993460 result=40 10:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:46 Parameters OK 10:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:46 Set A/D data flow result=40 10:23:46 Set A/D channel type result=40 10:23:46 Set A/D encoding result=40 10:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:46 Set channel filter=0.000000e+000 result=40 10:23:46 Config A/D Result=40 10:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:46 Get A/D filter: -9.255963e+061 result=40 10:23:46 Get A/D value=-858993460 result=40 10:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:46 Aux= 10:23:46 Message to Camera, serial 84789 queued [UTC 2019-3-3 10:23:50] 10:24:23 Received message from Master: op=PointingHead serial=84802 10:24:23 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:24:23 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:24:23 Point started: ret=0 10:24:23 point_skyscan result=0 10:24:24 Check angles 10:24:24 SkyScan query 10:24:24 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 10:24:24 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 10:24:24 Check angles 10:24:24 SkyScan query 10:24:25 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.495<-12433 Statuses=0009 0008 10:24:25 Msec=750 True Az=153.735 Ze=-6.495 Az status=0009 Ze status=0008 10:24:25 Check angles 10:24:25 SkyScan query 10:24:26 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 10:24:26 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 10:24:26 Check angles 10:24:26 SkyScan query 10:24:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:24:26 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:24:26 Message to Master queued w/err=0: serial=84802 error=0 10:24:31 Received message from Master: op=Filter serial=84803 10:24:31 Color wheel filter change from 0 to 0 10:24:31 FLIGetFilterPos err=0 currentPosition=0 10:24:31 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:31 Filter is already there-color wheel unchanged 10:24:32 Received message from Master: op=Shutter serial=84804 10:24:32 Shutter LASER close 10:24:32 Received message from Camera: op=State serial=84806 10:24:32 GetSingleValue result=40 Value=cccccccc 10:24:32 SkyScan query 10:24:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:24:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:32 Parameters OK 10:24:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:32 Set A/D data flow result=40 10:24:32 Set A/D channel type result=40 10:24:32 Set A/D encoding result=40 10:24:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:32 Set channel filter=0.000000e+000 result=40 10:24:32 Config A/D Result=40 10:24:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:32 Get A/D filter: -9.255963e+061 result=40 10:24:32 Get A/D value=-858993460 result=40 10:24:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:32 Parameters OK 10:24:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:32 Set A/D data flow result=40 10:24:32 Set A/D channel type result=40 10:24:32 Set A/D encoding result=40 10:24:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:32 Set channel filter=0.000000e+000 result=40 10:24:32 Config A/D Result=40 10:24:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:32 Get A/D filter: -9.255963e+061 result=40 10:24:32 Get A/D value=-858993460 result=40 10:24:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:32 Aux= 10:24:32 Message to Camera, serial 84806 queued 10:25:09 Received message from Master: op=PointingHead serial=84819 10:25:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:25:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:25:09 Point started: ret=0 10:25:09 point_skyscan result=0 10:25:10 Check angles 10:25:10 SkyScan query 10:25:11 SkyScan query done: ret=0 az=153.015<-10201 ze=6.51<-11566 Statuses=0009 0008 10:25:11 Msec=0 True Az=153.015 Ze=6.51 Az status=0009 Ze status=0008 10:25:11 Check angles 10:25:11 SkyScan query 10:25:11 SkyScan query done: ret=0 az=135.57<-9038 ze=6.495<-11567 Statuses=0009 0008 10:25:11 Msec=750 True Az=135.57 Ze=6.495 Az status=0009 Ze status=0008 10:25:12 Check angles 10:25:12 SkyScan query 10:25:12 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 10:25:12 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 10:25:12 Check angles 10:25:12 SkyScan query 10:25:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:25:13 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:25:13 Message to Master queued w/err=0: serial=84819 error=0 10:25:18 Received message from Master: op=Filter serial=84820 10:25:18 Color wheel filter change from 0 to 0 10:25:18 FLIGetFilterPos err=0 currentPosition=0 10:25:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:18 Filter is already there-color wheel unchanged 10:25:18 Received message from Master: op=Shutter serial=84821 10:25:18 Shutter LASER close 10:25:18 Received message from Camera: op=State serial=84823 10:25:18 GetSingleValue result=40 Value=cccccccc 10:25:18 SkyScan query 10:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:25:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:19 Parameters OK 10:25:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:19 Set A/D data flow result=40 10:25:19 Set A/D channel type result=40 10:25:19 Set A/D encoding result=40 10:25:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:19 Set channel filter=0.000000e+000 result=40 10:25:19 Config A/D Result=40 10:25:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:19 Get A/D filter: -9.255963e+061 result=40 10:25:19 Get A/D value=-858993460 result=40 10:25:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:19 Parameters OK 10:25:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:19 Set A/D data flow result=40 10:25:19 Set A/D channel type result=40 10:25:19 Set A/D encoding result=40 10:25:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:19 Set channel filter=0.000000e+000 result=40 10:25:19 Config A/D Result=40 10:25:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:19 Get A/D filter: -9.255963e+061 result=40 10:25:19 Get A/D value=-858993460 result=40 10:25:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:19 Aux= 10:25:19 Message to Camera, serial 84823 queued 10:25:56 Received message from Master: op=PointingHead serial=84836 10:25:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:25:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:25:56 Point started: ret=0 10:25:56 point_skyscan result=0 10:25:57 Check angles 10:25:57 SkyScan query 10:25:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 10:25:57 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 10:25:57 Check angles 10:25:57 SkyScan query 10:25:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 10:25:58 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 10:25:58 Check angles 10:25:58 SkyScan query 10:25:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 10:25:59 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 10:25:59 Check angles 10:25:59 SkyScan query 10:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 10:26:00 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 10:26:00 Check angles 10:26:00 SkyScan query 10:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 10:26:00 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 10:26:00 Check angles 10:26:00 SkyScan query 10:26:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.355<-20557 Statuses=0008 0009 10:26:01 Msec=3750 True Az=112.995 Ze=-128.355 Az status=0008 Ze status=0009 10:26:01 Check angles 10:26:01 SkyScan query 10:26:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.31<-21954 Statuses=0008 0009 10:26:02 Msec=4500 True Az=112.995 Ze=-149.31 Az status=0008 Ze status=0009 10:26:02 Check angles 10:26:02 SkyScan query 10:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.28<-23352 Statuses=0008 0009 10:26:03 Msec=5250 True Az=112.995 Ze=-170.28 Az status=0008 Ze status=0009 10:26:03 Check angles 10:26:03 SkyScan query 10:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:26:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:26:03 Message to Master queued w/err=0: serial=84836 error=0 10:26:08 Received message from Master: op=Filter serial=84837 10:26:08 Color wheel filter change from 0 to 0 10:26:08 FLIGetFilterPos err=0 currentPosition=0 10:26:08 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:08 Filter is already there-color wheel unchanged 10:26:08 Received message from Master: op=Shutter serial=84838 10:26:08 Shutter LASER open 10:26:09 Received message from Camera: op=State serial=84840 10:26:09 GetSingleValue result=40 Value=cccccccc 10:26:09 SkyScan query 10:26:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:26:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:09 Parameters OK 10:26:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:09 Set A/D data flow result=40 10:26:09 Set A/D channel type result=40 10:26:09 Set A/D encoding result=40 10:26:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:09 Set channel filter=0.000000e+000 result=40 10:26:09 Config A/D Result=40 10:26:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:09 Get A/D filter: -9.255963e+061 result=40 10:26:09 Get A/D value=-858993460 result=40 10:26:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:09 Parameters OK 10:26:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:09 Set A/D data flow result=40 10:26:09 Set A/D channel type result=40 10:26:09 Set A/D encoding result=40 10:26:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:09 Set channel filter=0.000000e+000 result=40 10:26:09 Config A/D Result=40 10:26:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:09 Get A/D filter: -9.255963e+061 result=40 10:26:09 Get A/D value=-858993460 result=40 10:26:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:09 Aux= 10:26:09 Message to Camera, serial 84840 queued 10:26:18 Received message from Master: op=Shutter serial=84850 10:26:18 Shutter LASER close 10:26:18 Received message from Master: op=PointingHead serial=84854 10:26:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:26:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:26:18 Point started: ret=0 10:26:18 point_skyscan result=0 10:26:19 Check angles 10:26:19 SkyScan query 10:26:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.1<-21540 Statuses=0008 0009 10:26:20 Msec=0 True Az=112.995 Ze=-143.1 Az status=0008 Ze status=0009 10:26:20 Check angles 10:26:20 SkyScan query 10:26:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 10:26:21 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 10:26:21 Check angles 10:26:21 SkyScan query 10:26:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 10:26:21 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 10:26:21 Check angles 10:26:21 SkyScan query 10:26:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.25<-17350 Statuses=0008 0009 10:26:22 Msec=2250 True Az=112.995 Ze=-80.25 Az status=0008 Ze status=0009 10:26:22 Check angles 10:26:22 SkyScan query 10:26:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 10:26:23 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 10:26:23 Check angles 10:26:23 SkyScan query 10:26:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.325<-14555 Statuses=0008 0009 10:26:24 Msec=3750 True Az=112.995 Ze=-38.325 Az status=0008 Ze status=0009 10:26:24 Check angles 10:26:24 SkyScan query 10:26:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.385<-13159 Statuses=0008 0009 10:26:24 Msec=4500 True Az=112.995 Ze=-17.385 Az status=0008 Ze status=0009 10:26:24 Check angles 10:26:24 SkyScan query 10:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=3.57<-11762 Statuses=0008 0009 10:26:25 Msec=5250 True Az=112.995 Ze=3.57 Az status=0008 Ze status=0009 10:26:25 Check angles 10:26:25 SkyScan query 10:26:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:26:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:26:26 Message to Master queued w/err=0: serial=84854 error=0 10:26:31 Received message from Master: op=Filter serial=84855 10:26:31 Color wheel filter change from 0 to 0 10:26:31 FLIGetFilterPos err=0 currentPosition=0 10:26:31 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:31 Filter is already there-color wheel unchanged 10:26:31 Received message from Master: op=Shutter serial=84856 10:26:31 Shutter LASER close 10:26:31 Received message from Camera: op=State serial=84858 10:26:31 GetSingleValue result=40 Value=cccccccc 10:26:31 SkyScan query 10:26:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:26:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:32 Parameters OK 10:26:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:32 Set A/D data flow result=40 10:26:32 Set A/D channel type result=40 10:26:32 Set A/D encoding result=40 10:26:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:32 Set channel filter=0.000000e+000 result=40 10:26:32 Config A/D Result=40 10:26:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:32 Get A/D filter: -9.255963e+061 result=40 10:26:32 Get A/D value=-858993460 result=40 10:26:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:32 Parameters OK 10:26:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:32 Set A/D data flow result=40 10:26:32 Set A/D channel type result=40 10:26:32 Set A/D encoding result=40 10:26:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:32 Set channel filter=0.000000e+000 result=40 10:26:32 Config A/D Result=40 10:26:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:32 Get A/D filter: -9.255963e+061 result=40 10:26:32 Get A/D value=-858993460 result=40 10:26:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:32 Aux= 10:26:32 Message to Camera, serial 84858 queued 10:27:09 Received message from Master: op=PointingHead serial=84871 10:27:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:27:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:27:09 Point started: ret=0 10:27:09 point_skyscan result=0 10:27:10 Check angles 10:27:10 SkyScan query 10:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:27:10 Message to Master queued w/err=0: serial=84871 error=0 10:27:15 Received message from Master: op=Filter serial=84872 10:27:15 Color wheel filter change from 0 to 0 10:27:15 FLIGetFilterPos err=0 currentPosition=0 10:27:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:15 Filter is already there-color wheel unchanged 10:27:15 Received message from Master: op=Shutter serial=84873 10:27:15 Shutter LASER close 10:27:15 Received message from Camera: op=State serial=84875 10:27:15 GetSingleValue result=40 Value=cccccccc 10:27:15 SkyScan query 10:27:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:16 Parameters OK 10:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:16 Set A/D data flow result=40 10:27:16 Set A/D channel type result=40 10:27:16 Set A/D encoding result=40 10:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:16 Set channel filter=0.000000e+000 result=40 10:27:16 Config A/D Result=40 10:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:16 Get A/D filter: -9.255963e+061 result=40 10:27:16 Get A/D value=-858993460 result=40 10:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:16 Parameters OK 10:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:16 Set A/D data flow result=40 10:27:16 Set A/D channel type result=40 10:27:16 Set A/D encoding result=40 10:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:16 Set channel filter=0.000000e+000 result=40 10:27:16 Config A/D Result=40 10:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:16 Get A/D filter: -9.255963e+061 result=40 10:27:16 Get A/D value=-858993460 result=40 10:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:16 Aux= 10:27:16 Message to Camera, serial 84875 queued 10:27:53 Received message from Master: op=PointingHead serial=84888 10:27:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:27:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:27:53 Point started: ret=0 10:27:53 point_skyscan result=0 10:27:54 Check angles 10:27:54 SkyScan query 10:27:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:27:55 Message to Master queued w/err=0: serial=84888 error=0 10:28:00 Received message from Master: op=Filter serial=84889 10:28:00 Color wheel filter change from 0 to 0 10:28:00 FLIGetFilterPos err=0 currentPosition=0 10:28:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:00 Filter is already there-color wheel unchanged 10:28:00 Received message from Master: op=Shutter serial=84890 10:28:00 Shutter LASER close 10:28:00 Received message from Camera: op=State serial=84892 10:28:00 GetSingleValue result=40 Value=cccccccc 10:28:00 SkyScan query 10:28:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:28:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:00 Parameters OK 10:28:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:00 Set A/D data flow result=40 10:28:00 Set A/D channel type result=40 10:28:00 Set A/D encoding result=40 10:28:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:00 Set channel filter=0.000000e+000 result=40 10:28:00 Config A/D Result=40 10:28:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:00 Get A/D filter: -9.255963e+061 result=40 10:28:00 Get A/D value=-858993460 result=40 10:28:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:00 Parameters OK 10:28:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:00 Set A/D data flow result=40 10:28:00 Set A/D channel type result=40 10:28:00 Set A/D encoding result=40 10:28:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:00 Set channel filter=0.000000e+000 result=40 10:28:00 Config A/D Result=40 10:28:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:00 Get A/D filter: -9.255963e+061 result=40 10:28:00 Get A/D value=-858993460 result=40 10:28:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:00 Aux= 10:28:00 Message to Camera, serial 84892 queued 10:28:37 Received message from Master: op=PointingHead serial=84905 10:28:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:28:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:28:38 Point started: ret=0 10:28:38 point_skyscan result=0 10:28:38 Check angles 10:28:38 SkyScan query 10:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:28:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:28:39 Message to Master queued w/err=0: serial=84905 error=0 10:28:44 Received message from Master: op=Filter serial=84906 10:28:44 Color wheel filter change from 0 to 0 10:28:44 FLIGetFilterPos err=0 currentPosition=0 10:28:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:44 Filter is already there-color wheel unchanged 10:28:44 Received message from Master: op=Shutter serial=84907 10:28:44 Shutter LASER close 10:28:44 Received message from Camera: op=State serial=84909 10:28:44 GetSingleValue result=40 Value=cccccccc 10:28:44 SkyScan query 10:28:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:28:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:45 Parameters OK 10:28:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:45 Set A/D data flow result=40 10:28:45 Set A/D channel type result=40 10:28:45 Set A/D encoding result=40 10:28:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:45 Set channel filter=0.000000e+000 result=40 10:28:45 Config A/D Result=40 10:28:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:45 Get A/D filter: -9.255963e+061 result=40 10:28:45 Get A/D value=-858993460 result=40 10:28:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:45 Parameters OK 10:28:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:45 Set A/D data flow result=40 10:28:45 Set A/D channel type result=40 10:28:45 Set A/D encoding result=40 10:28:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:45 Set channel filter=0.000000e+000 result=40 10:28:45 Config A/D Result=40 10:28:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:45 Get A/D filter: -9.255963e+061 result=40 10:28:45 Get A/D value=-858993460 result=40 10:28:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:45 Aux= 10:28:45 Message to Camera, serial 84909 queued 10:29:21 Received message from Master: op=PointingHead serial=84922 10:29:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:29:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:29:22 Point started: ret=0 10:29:22 point_skyscan result=0 10:29:23 Check angles 10:29:23 SkyScan query 10:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 10:29:23 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 10:29:23 Check angles 10:29:23 SkyScan query 10:29:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 10:29:24 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 10:29:24 Check angles 10:29:24 SkyScan query 10:29:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 10:29:25 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 10:29:25 Check angles 10:29:25 SkyScan query 10:29:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.745<-17783 Statuses=0008 0009 10:29:25 Msec=2250 True Az=112.995 Ze=-86.745 Az status=0008 Ze status=0009 10:29:26 Check angles 10:29:26 SkyScan query 10:29:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.73<-19182 Statuses=0008 0009 10:29:26 Msec=3000 True Az=112.995 Ze=-107.73 Az status=0008 Ze status=0009 10:29:26 Check angles 10:29:26 SkyScan query 10:29:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 10:29:27 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 10:29:27 Check angles 10:29:27 SkyScan query 10:29:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 10:29:28 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 10:29:28 Check angles 10:29:28 SkyScan query 10:29:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 10:29:28 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 10:29:29 Check angles 10:29:29 SkyScan query 10:29:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:29:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:29:29 Message to Master queued w/err=0: serial=84922 error=0 10:29:34 Received message from Master: op=Filter serial=84923 10:29:34 Color wheel filter change from 0 to 0 10:29:34 FLIGetFilterPos err=0 currentPosition=0 10:29:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:34 Filter is already there-color wheel unchanged 10:29:34 Received message from Master: op=Shutter serial=84924 10:29:34 Shutter LASER open 10:29:35 Received message from Camera: op=State serial=84926 10:29:35 GetSingleValue result=40 Value=cccccccc 10:29:35 SkyScan query 10:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:29:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:35 Parameters OK 10:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:35 Set A/D data flow result=40 10:29:35 Set A/D channel type result=40 10:29:35 Set A/D encoding result=40 10:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:35 Set channel filter=0.000000e+000 result=40 10:29:35 Config A/D Result=40 10:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:35 Get A/D filter: -9.255963e+061 result=40 10:29:35 Get A/D value=-858993460 result=40 10:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:35 Parameters OK 10:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:35 Set A/D data flow result=40 10:29:35 Set A/D channel type result=40 10:29:35 Set A/D encoding result=40 10:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:35 Set channel filter=0.000000e+000 result=40 10:29:35 Config A/D Result=40 10:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:35 Get A/D filter: -9.255963e+061 result=40 10:29:35 Get A/D value=-858993460 result=40 10:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:35 Aux= 10:29:35 Message to Camera, serial 84926 queued 10:29:44 Received message from Master: op=Shutter serial=84936 10:29:44 Shutter LASER close 10:29:44 Received message from Master: op=PointingHead serial=84940 10:29:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:29:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:29:44 Point started: ret=0 10:29:44 point_skyscan result=0 10:29:45 Check angles 10:29:45 SkyScan query 10:29:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 10:29:46 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 10:29:46 Check angles 10:29:46 SkyScan query 10:29:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 10:29:47 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 10:29:47 Check angles 10:29:47 SkyScan query 10:29:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 10:29:47 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 10:29:47 Check angles 10:29:47 SkyScan query 10:29:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.025<-17335 Statuses=0008 0009 10:29:48 Msec=2250 True Az=112.995 Ze=-80.025 Az status=0008 Ze status=0009 10:29:48 Check angles 10:29:48 SkyScan query 10:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 10:29:49 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 10:29:49 Check angles 10:29:49 SkyScan query 10:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.085<-14539 Statuses=0008 0009 10:29:50 Msec=3750 True Az=112.995 Ze=-38.085 Az status=0008 Ze status=0009 10:29:50 Check angles 10:29:50 SkyScan query 10:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.145<-13143 Statuses=0008 0009 10:29:50 Msec=4500 True Az=112.995 Ze=-17.145 Az status=0008 Ze status=0009 10:29:50 Check angles 10:29:50 SkyScan query 10:29:51 SkyScan query done: ret=0 az=112.995<-7533 ze=3.81<-11746 Statuses=0008 0009 10:29:51 Msec=5250 True Az=112.995 Ze=3.81 Az status=0008 Ze status=0009 10:29:51 Check angles 10:29:51 SkyScan query 10:29:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:29:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:29:52 Message to Master queued w/err=0: serial=84940 error=0 10:29:57 Received message from Master: op=Filter serial=84941 10:29:57 Color wheel filter change from 0 to 0 10:29:57 FLIGetFilterPos err=0 currentPosition=0 10:29:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:57 Filter is already there-color wheel unchanged 10:29:57 Received message from Master: op=Shutter serial=84942 10:29:57 Shutter LASER close 10:29:57 Received message from Camera: op=State serial=84944 10:29:57 GetSingleValue result=40 Value=cccccccc 10:29:57 SkyScan query 10:29:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:29:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:58 Parameters OK 10:29:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:58 Set A/D data flow result=40 10:29:58 Set A/D channel type result=40 10:29:58 Set A/D encoding result=40 10:29:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:58 Set channel filter=0.000000e+000 result=40 10:29:58 Config A/D Result=40 10:29:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:58 Get A/D filter: -9.255963e+061 result=40 10:29:58 Get A/D value=-858993460 result=40 10:29:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:58 Parameters OK 10:29:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:58 Set A/D data flow result=40 10:29:58 Set A/D channel type result=40 10:29:58 Set A/D encoding result=40 10:29:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:58 Set channel filter=0.000000e+000 result=40 10:29:58 Config A/D Result=40 10:29:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:58 Get A/D filter: -9.255963e+061 result=40 10:29:58 Get A/D value=-858993460 result=40 10:29:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:58 Aux= 10:29:58 Message to Camera, serial 84944 queued 10:30:35 Received message from Master: op=PointingHead serial=84957 10:30:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:30:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:30:35 Point started: ret=0 10:30:35 point_skyscan result=0 10:30:36 Check angles 10:30:36 SkyScan query 10:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:30:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:30:36 Message to Master queued w/err=0: serial=84957 error=0 10:30:41 Received message from Master: op=Filter serial=84958 10:30:41 Color wheel filter change from 0 to 0 10:30:41 FLIGetFilterPos err=0 currentPosition=0 10:30:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:41 Filter is already there-color wheel unchanged 10:30:41 Received message from Master: op=Shutter serial=84959 10:30:41 Shutter LASER close 10:30:41 Received message from Camera: op=State serial=84961 10:30:41 GetSingleValue result=40 Value=cccccccc 10:30:41 SkyScan query 10:30:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:30:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:42 Parameters OK 10:30:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:42 Set A/D data flow result=40 10:30:42 Set A/D channel type result=40 10:30:42 Set A/D encoding result=40 10:30:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:42 Set channel filter=0.000000e+000 result=40 10:30:42 Config A/D Result=40 10:30:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:42 Get A/D filter: -9.255963e+061 result=40 10:30:42 Get A/D value=-858993460 result=40 10:30:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:42 Parameters OK 10:30:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:42 Set A/D data flow result=40 10:30:42 Set A/D channel type result=40 10:30:42 Set A/D encoding result=40 10:30:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:42 Set channel filter=0.000000e+000 result=40 10:30:42 Config A/D Result=40 10:30:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:42 Get A/D filter: -9.255963e+061 result=40 10:30:42 Get A/D value=-858993460 result=40 10:30:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:42 Aux= 10:30:42 Message to Camera, serial 84961 queued 10:31:19 Received message from Master: op=PointingHead serial=84974 10:31:19 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:31:19 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:31:19 Point started: ret=0 10:31:19 point_skyscan result=0 10:31:20 Check angles 10:31:20 SkyScan query 10:31:20 SkyScan query done: ret=0 az=136.185<-9079 ze=-6.51<-12434 Statuses=0009 0008 10:31:20 Msec=0 True Az=136.185 Ze=-6.51 Az status=0009 Ze status=0008 10:31:21 Check angles 10:31:21 SkyScan query 10:31:21 SkyScan query done: ret=0 az=153.675<-10245 ze=-6.495<-12433 Statuses=0009 0008 10:31:21 Msec=750 True Az=153.675 Ze=-6.495 Az status=0009 Ze status=0008 10:31:21 Check angles 10:31:21 SkyScan query 10:31:22 SkyScan query done: ret=0 az=171.195<-11413 ze=-6.495<-12433 Statuses=0009 0008 10:31:22 Msec=1500 True Az=171.195 Ze=-6.495 Az status=0009 Ze status=0008 10:31:22 Check angles 10:31:22 SkyScan query 10:31:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:31:23 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:31:23 Message to Master queued w/err=0: serial=84974 error=0 10:31:28 Received message from Master: op=Filter serial=84975 10:31:28 Color wheel filter change from 0 to 0 10:31:28 FLIGetFilterPos err=0 currentPosition=0 10:31:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:31:28 Filter is already there-color wheel unchanged 10:31:28 Received message from Master: op=Shutter serial=84976 10:31:28 Shutter LASER close 10:31:28 Received message from Camera: op=State serial=84978 10:31:28 GetSingleValue result=40 Value=cccccccc 10:31:28 SkyScan query 10:31:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:31:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:29 Parameters OK 10:31:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:29 Set A/D data flow result=40 10:31:29 Set A/D channel type result=40 10:31:29 Set A/D encoding result=40 10:31:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:29 Set channel filter=0.000000e+000 result=40 10:31:29 Config A/D Result=40 10:31:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:29 Get A/D filter: -9.255963e+061 result=40 10:31:29 Get A/D value=-858993460 result=40 10:31:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:29 Parameters OK 10:31:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:29 Set A/D data flow result=40 10:31:29 Set A/D channel type result=40 10:31:29 Set A/D encoding result=40 10:31:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:29 Set channel filter=0.000000e+000 result=40 10:31:29 Config A/D Result=40 10:31:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:29 Get A/D filter: -9.255963e+061 result=40 10:31:29 Get A/D value=-858993460 result=40 10:31:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:31:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:31:29 Aux= 10:31:29 Message to Camera, serial 84978 queued 10:32:05 Received message from Master: op=PointingHead serial=84991 10:32:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:32:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:32:06 Point started: ret=0 10:32:06 point_skyscan result=0 10:32:06 Check angles 10:32:06 SkyScan query 10:32:07 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 10:32:07 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 10:32:07 Check angles 10:32:07 SkyScan query 10:32:08 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 10:32:08 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 10:32:08 Check angles 10:32:08 SkyScan query 10:32:09 SkyScan query done: ret=0 az=117.87<-7858 ze=6.495<-11567 Statuses=0009 0008 10:32:09 Msec=1500 True Az=117.87 Ze=6.495 Az status=0009 Ze status=0008 10:32:09 Check angles 10:32:09 SkyScan query 10:32:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:32:09 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:32:09 Message to Master queued w/err=0: serial=84991 error=0 10:32:14 Received message from Master: op=Filter serial=84992 10:32:14 Color wheel filter change from 0 to 0 10:32:14 FLIGetFilterPos err=0 currentPosition=0 10:32:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:14 Filter is already there-color wheel unchanged 10:32:14 Received message from Master: op=Shutter serial=84993 10:32:14 Shutter LASER close 10:32:14 Received message from Camera: op=State serial=84995 10:32:14 GetSingleValue result=40 Value=cccccccc 10:32:14 SkyScan query 10:32:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:32:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:15 Parameters OK 10:32:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:15 Set A/D data flow result=40 10:32:15 Set A/D channel type result=40 10:32:15 Set A/D encoding result=40 10:32:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:15 Set channel filter=0.000000e+000 result=40 10:32:15 Config A/D Result=40 10:32:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:15 Get A/D filter: -9.255963e+061 result=40 10:32:15 Get A/D value=-858993460 result=40 10:32:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:15 Parameters OK 10:32:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:15 Set A/D data flow result=40 10:32:15 Set A/D channel type result=40 10:32:15 Set A/D encoding result=40 10:32:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:15 Set channel filter=0.000000e+000 result=40 10:32:15 Config A/D Result=40 10:32:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:15 Get A/D filter: -9.255963e+061 result=40 10:32:15 Get A/D value=-858993460 result=40 10:32:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:15 Aux= 10:32:15 Message to Camera, serial 84995 queued 10:32:51 Received message from Master: op=PointingHead serial=85007 10:32:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:32:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:32:51 Point started: ret=0 10:32:51 point_skyscan result=0 10:32:52 Check angles 10:32:52 SkyScan query 10:32:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 10:32:53 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 10:32:53 Check angles 10:32:53 SkyScan query 10:32:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.98<-14932 Statuses=0008 0009 10:32:53 Msec=750 True Az=112.995 Ze=-43.98 Az status=0008 Ze status=0009 10:32:54 Check angles 10:32:54 SkyScan query 10:32:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 10:32:54 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 10:32:54 Check angles 10:32:54 SkyScan query 10:32:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 10:32:55 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 10:32:55 Check angles 10:32:55 SkyScan query 10:32:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 10:32:56 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 10:32:56 Check angles 10:32:56 SkyScan query 10:32:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 10:32:56 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 10:32:57 Check angles 10:32:57 SkyScan query 10:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 10:32:57 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 10:32:57 Check angles 10:32:57 SkyScan query 10:32:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.88<-23392 Statuses=0008 0009 10:32:58 Msec=5250 True Az=112.995 Ze=-170.88 Az status=0008 Ze status=0009 10:32:58 Check angles 10:32:58 SkyScan query 10:32:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:32:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:32:59 Message to Master queued w/err=0: serial=85007 error=0 10:33:04 Received message from Master: op=Filter serial=85008 10:33:04 Color wheel filter change from 0 to 0 10:33:04 FLIGetFilterPos err=0 currentPosition=0 10:33:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:04 Filter is already there-color wheel unchanged 10:33:04 Received message from Master: op=Shutter serial=85009 10:33:04 Shutter LASER open 10:33:04 Received message from Camera: op=State serial=85011 10:33:04 GetSingleValue result=40 Value=cccccccc 10:33:04 SkyScan query 10:33:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:33:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:05 Parameters OK 10:33:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:05 Set A/D data flow result=40 10:33:05 Set A/D channel type result=40 10:33:05 Set A/D encoding result=40 10:33:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:05 Set channel filter=0.000000e+000 result=40 10:33:05 Config A/D Result=40 10:33:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:05 Get A/D filter: -9.255963e+061 result=40 10:33:05 Get A/D value=-858993460 result=40 10:33:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:05 Parameters OK 10:33:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:05 Set A/D data flow result=40 10:33:05 Set A/D channel type result=40 10:33:05 Set A/D encoding result=40 10:33:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:05 Set channel filter=0.000000e+000 result=40 10:33:05 Config A/D Result=40 10:33:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:05 Get A/D filter: -9.255963e+061 result=40 10:33:05 Get A/D value=-858993460 result=40 10:33:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:05 Aux= 10:33:05 Message to Camera, serial 85011 queued 10:33:13 Received message from Master: op=Shutter serial=85021 10:33:13 Shutter LASER close 10:33:13 Received message from Master: op=PointingHead serial=85025 10:33:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:33:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:33:14 Point started: ret=0 10:33:14 point_skyscan result=0 10:33:15 Check angles 10:33:15 SkyScan query 10:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 10:33:15 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 10:33:15 Check angles 10:33:15 SkyScan query 10:33:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.59<-20106 Statuses=0008 0009 10:33:16 Msec=750 True Az=112.995 Ze=-121.59 Az status=0008 Ze status=0009 10:33:16 Check angles 10:33:16 SkyScan query 10:33:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 10:33:17 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 10:33:17 Check angles 10:33:17 SkyScan query 10:33:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 10:33:17 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 10:33:18 Check angles 10:33:18 SkyScan query 10:33:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.275<-15885 Statuses=0008 0009 10:33:18 Msec=3000 True Az=112.995 Ze=-58.275 Az status=0008 Ze status=0009 10:33:18 Check angles 10:33:18 SkyScan query 10:33:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.35<-14490 Statuses=0008 0009 10:33:19 Msec=3750 True Az=112.995 Ze=-37.35 Az status=0008 Ze status=0009 10:33:19 Check angles 10:33:19 SkyScan query 10:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.395<-13093 Statuses=0008 0009 10:33:20 Msec=4500 True Az=112.995 Ze=-16.395 Az status=0008 Ze status=0009 10:33:20 Check angles 10:33:20 SkyScan query 10:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.8<-11680 Statuses=0008 0009 10:33:20 Msec=5250 True Az=112.995 Ze=4.8 Az status=0008 Ze status=0009 10:33:21 Check angles 10:33:21 SkyScan query 10:33:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:33:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:33:21 Message to Master queued w/err=0: serial=85025 error=0 10:33:26 Received message from Master: op=Filter serial=85026 10:33:26 Color wheel filter change from 0 to 0 10:33:26 FLIGetFilterPos err=0 currentPosition=0 10:33:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:26 Filter is already there-color wheel unchanged 10:33:26 Received message from Master: op=Shutter serial=85027 10:33:26 Shutter LASER close 10:33:27 Received message from Camera: op=State serial=85029 10:33:27 GetSingleValue result=40 Value=cccccccc 10:33:27 SkyScan query 10:33:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:33:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:27 Parameters OK 10:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:27 Set A/D data flow result=40 10:33:27 Set A/D channel type result=40 10:33:27 Set A/D encoding result=40 10:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:27 Set channel filter=0.000000e+000 result=40 10:33:27 Config A/D Result=40 10:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:27 Get A/D filter: -9.255963e+061 result=40 10:33:27 Get A/D value=-858993460 result=40 10:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:27 Parameters OK 10:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:27 Set A/D data flow result=40 10:33:27 Set A/D channel type result=40 10:33:27 Set A/D encoding result=40 10:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:27 Set channel filter=0.000000e+000 result=40 10:33:27 Config A/D Result=40 10:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:27 Get A/D filter: -9.255963e+061 result=40 10:33:27 Get A/D value=-858993460 result=40 10:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:27 Aux= 10:33:27 Message to Camera, serial 85029 queued 10:33:38 Received message from Master: op=Identify serial=85030 10:34:04 Received message from Master: op=PointingHead serial=85045 10:34:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:34:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:34:04 Point started: ret=0 10:34:04 point_skyscan result=0 10:34:05 Check angles 10:34:05 SkyScan query 10:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:34:06 Message to Master queued w/err=0: serial=85045 error=0 10:34:11 Received message from Master: op=Filter serial=85046 10:34:11 Color wheel filter change from 0 to 0 10:34:11 FLIGetFilterPos err=0 currentPosition=0 10:34:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:11 Filter is already there-color wheel unchanged 10:34:11 Received message from Master: op=Shutter serial=85047 10:34:11 Shutter LASER close 10:34:11 Received message from Camera: op=State serial=85049 10:34:11 GetSingleValue result=40 Value=cccccccc 10:34:11 SkyScan query 10:34:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:11 Parameters OK 10:34:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:11 Set A/D data flow result=40 10:34:11 Set A/D channel type result=40 10:34:11 Set A/D encoding result=40 10:34:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:11 Set channel filter=0.000000e+000 result=40 10:34:11 Config A/D Result=40 10:34:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:11 Get A/D filter: -9.255963e+061 result=40 10:34:11 Get A/D value=-858993460 result=40 10:34:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:11 Parameters OK 10:34:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:11 Set A/D data flow result=40 [UTC 2019-3-3 10:34:11] 10:34:11 Set A/D channel type result=40 10:34:11 Set A/D encoding result=40 10:34:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:11 Set channel filter=0.000000e+000 result=40 10:34:11 Config A/D Result=40 10:34:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:11 Get A/D filter: -9.255963e+061 result=40 10:34:11 Get A/D value=-858993460 result=40 10:34:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:11 Aux= 10:34:11 Message to Camera, serial 85049 queued 10:34:48 Received message from Master: op=PointingHead serial=85062 10:34:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:34:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:34:49 Point started: ret=0 10:34:49 point_skyscan result=0 10:34:49 Check angles 10:34:49 SkyScan query 10:34:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:34:50 Message to Master queued w/err=0: serial=85062 error=0 10:34:55 Received message from Master: op=Filter serial=85063 10:34:55 Color wheel filter change from 0 to 0 10:34:55 FLIGetFilterPos err=0 currentPosition=0 10:34:55 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:55 Filter is already there-color wheel unchanged 10:34:55 Received message from Master: op=Shutter serial=85064 10:34:55 Shutter LASER close 10:34:55 Received message from Camera: op=State serial=85066 10:34:55 GetSingleValue result=40 Value=cccccccc 10:34:55 SkyScan query 10:34:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:56 Parameters OK 10:34:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:56 Set A/D data flow result=40 10:34:56 Set A/D channel type result=40 10:34:56 Set A/D encoding result=40 10:34:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:56 Set channel filter=0.000000e+000 result=40 10:34:56 Config A/D Result=40 10:34:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:56 Get A/D filter: -9.255963e+061 result=40 10:34:56 Get A/D value=-858993460 result=40 10:34:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:56 Parameters OK 10:34:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:56 Set A/D data flow result=40 10:34:56 Set A/D channel type result=40 10:34:56 Set A/D encoding result=40 10:34:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:56 Set channel filter=0.000000e+000 result=40 10:34:56 Config A/D Result=40 10:34:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:56 Get A/D filter: -9.255963e+061 result=40 10:34:56 Get A/D value=-858993460 result=40 10:34:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:56 Aux= 10:34:56 Message to Camera, serial 85066 queued 10:35:33 Received message from Master: op=PointingHead serial=85079 10:35:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:35:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:35:33 Point started: ret=0 10:35:33 point_skyscan result=0 10:35:34 Check angles 10:35:34 SkyScan query 10:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:35:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:35:34 Message to Master queued w/err=0: serial=85079 error=0 10:35:39 Received message from Master: op=Filter serial=85080 10:35:39 Color wheel filter change from 0 to 0 10:35:39 FLIGetFilterPos err=0 currentPosition=0 10:35:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:39 Filter is already there-color wheel unchanged 10:35:39 Received message from Master: op=Shutter serial=85081 10:35:39 Shutter LASER close 10:35:39 Received message from Camera: op=State serial=85083 10:35:39 GetSingleValue result=40 Value=cccccccc 10:35:39 SkyScan query 10:35:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:35:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:40 Parameters OK 10:35:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:40 Set A/D data flow result=40 10:35:40 Set A/D channel type result=40 10:35:40 Set A/D encoding result=40 10:35:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:40 Set channel filter=0.000000e+000 result=40 10:35:40 Config A/D Result=40 10:35:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:40 Get A/D filter: -9.255963e+061 result=40 10:35:40 Get A/D value=-858993460 result=40 10:35:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:40 Parameters OK 10:35:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:40 Set A/D data flow result=40 10:35:40 Set A/D channel type result=40 10:35:40 Set A/D encoding result=40 10:35:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:40 Set channel filter=0.000000e+000 result=40 10:35:40 Config A/D Result=40 10:35:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:40 Get A/D filter: -9.255963e+061 result=40 10:35:40 Get A/D value=-858993460 result=40 10:35:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:40 Aux= 10:35:40 Message to Camera, serial 85083 queued 10:36:17 Received message from Master: op=PointingHead serial=85096 10:36:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:36:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:36:17 Point started: ret=0 10:36:17 point_skyscan result=0 10:36:18 Check angles 10:36:18 SkyScan query 10:36:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 10:36:18 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 10:36:19 Check angles 10:36:19 SkyScan query 10:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 10:36:19 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 10:36:19 Check angles 10:36:19 SkyScan query 10:36:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.685<-16379 Statuses=0008 0009 10:36:20 Msec=1500 True Az=112.995 Ze=-65.685 Az status=0008 Ze status=0009 10:36:20 Check angles 10:36:20 SkyScan query 10:36:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.06<-17804 Statuses=0008 0009 10:36:21 Msec=2250 True Az=112.995 Ze=-87.06 Az status=0008 Ze status=0009 10:36:21 Check angles 10:36:21 SkyScan query 10:36:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.03<-19202 Statuses=0008 0009 10:36:21 Msec=3000 True Az=112.995 Ze=-108.03 Az status=0008 Ze status=0009 10:36:22 Check angles 10:36:22 SkyScan query 10:36:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.97<-20598 Statuses=0008 0009 10:36:22 Msec=3750 True Az=112.995 Ze=-128.97 Az status=0008 Ze status=0009 10:36:22 Check angles 10:36:22 SkyScan query 10:36:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.375<-22025 Statuses=0008 0009 10:36:23 Msec=4500 True Az=112.995 Ze=-150.375 Az status=0008 Ze status=0009 10:36:23 Check angles 10:36:23 SkyScan query 10:36:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0008 0009 10:36:24 Msec=5250 True Az=112.995 Ze=-171.465 Az status=0008 Ze status=0009 10:36:24 Check angles 10:36:24 SkyScan query 10:36:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:36:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:36:25 Message to Master queued w/err=0: serial=85096 error=0 10:36:30 Received message from Master: op=Filter serial=85097 10:36:30 Color wheel filter change from 0 to 0 10:36:30 FLIGetFilterPos err=0 currentPosition=0 10:36:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:30 Filter is already there-color wheel unchanged 10:36:30 Received message from Master: op=Shutter serial=85098 10:36:30 Shutter LASER open 10:36:30 Received message from Camera: op=State serial=85100 10:36:30 GetSingleValue result=40 Value=cccccccc 10:36:30 SkyScan query 10:36:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:36:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:30 Parameters OK 10:36:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:30 Set A/D data flow result=40 10:36:30 Set A/D channel type result=40 10:36:30 Set A/D encoding result=40 10:36:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:30 Set channel filter=0.000000e+000 result=40 10:36:30 Config A/D Result=40 10:36:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:30 Get A/D filter: -9.255963e+061 result=40 10:36:30 Get A/D value=-858993460 result=40 10:36:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:30 Parameters OK 10:36:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:30 Set A/D data flow result=40 10:36:30 Set A/D channel type result=40 10:36:30 Set A/D encoding result=40 10:36:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:30 Set channel filter=0.000000e+000 result=40 10:36:30 Config A/D Result=40 10:36:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:30 Get A/D filter: -9.255963e+061 result=40 10:36:30 Get A/D value=-858993460 result=40 10:36:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:30 Aux= 10:36:30 Message to Camera, serial 85100 queued 10:36:39 Received message from Master: op=Shutter serial=85110 10:36:39 Shutter LASER close 10:36:40 Received message from Master: op=PointingHead serial=85114 10:36:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:36:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:36:40 Point started: ret=0 10:36:40 point_skyscan result=0 10:36:41 Check angles 10:36:41 SkyScan query 10:36:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.89<-21526 Statuses=0008 0009 10:36:41 Msec=0 True Az=112.995 Ze=-142.89 Az status=0008 Ze status=0009 10:36:41 Check angles 10:36:41 SkyScan query 10:36:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.5<-20100 Statuses=0008 0009 10:36:42 Msec=750 True Az=112.995 Ze=-121.5 Az status=0008 Ze status=0009 10:36:42 Check angles 10:36:42 SkyScan query 10:36:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.56<-18704 Statuses=0008 0009 10:36:43 Msec=1500 True Az=112.995 Ze=-100.56 Az status=0008 Ze status=0009 10:36:43 Check angles 10:36:43 SkyScan query 10:36:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.59<-17306 Statuses=0008 0009 10:36:43 Msec=2250 True Az=112.995 Ze=-79.59 Az status=0008 Ze status=0009 10:36:44 Check angles 10:36:44 SkyScan query 10:36:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.62<-15908 Statuses=0008 0009 10:36:44 Msec=3000 True Az=112.995 Ze=-58.62 Az status=0008 Ze status=0009 10:36:44 Check angles 10:36:44 SkyScan query 10:36:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.665<-14511 Statuses=0008 0009 10:36:45 Msec=3750 True Az=112.995 Ze=-37.665 Az status=0008 Ze status=0009 10:36:45 Check angles 10:36:45 SkyScan query 10:36:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.71<-13114 Statuses=0008 0009 10:36:46 Msec=4500 True Az=112.995 Ze=-16.71 Az status=0008 Ze status=0009 10:36:46 Check angles 10:36:46 SkyScan query 10:36:46 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 10:36:46 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 10:36:47 Check angles 10:36:47 SkyScan query 10:36:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:36:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:36:47 Message to Master queued w/err=0: serial=85114 error=0 10:36:52 Received message from Master: op=Filter serial=85115 10:36:52 Color wheel filter change from 0 to 0 10:36:52 FLIGetFilterPos err=0 currentPosition=0 10:36:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:52 Filter is already there-color wheel unchanged 10:36:52 Received message from Master: op=Shutter serial=85116 10:36:52 Shutter LASER close 10:36:53 Received message from Camera: op=State serial=85118 10:36:53 GetSingleValue result=40 Value=cccccccc 10:36:53 SkyScan query 10:36:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:36:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:53 Parameters OK 10:36:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:53 Set A/D data flow result=40 10:36:53 Set A/D channel type result=40 10:36:53 Set A/D encoding result=40 10:36:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:53 Set channel filter=0.000000e+000 result=40 10:36:53 Config A/D Result=40 10:36:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:53 Get A/D filter: -9.255963e+061 result=40 10:36:53 Get A/D value=-858993460 result=40 10:36:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:53 Parameters OK 10:36:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:53 Set A/D data flow result=40 10:36:53 Set A/D channel type result=40 10:36:53 Set A/D encoding result=40 10:36:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:53 Set channel filter=0.000000e+000 result=40 10:36:53 Config A/D Result=40 10:36:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:53 Get A/D filter: -9.255963e+061 result=40 10:36:53 Get A/D value=-858993460 result=40 10:36:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:53 Aux= 10:36:53 Message to Camera, serial 85118 queued 10:37:30 Received message from Master: op=PointingHead serial=85131 10:37:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:37:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:37:30 Point started: ret=0 10:37:30 point_skyscan result=0 10:37:31 Check angles 10:37:31 SkyScan query 10:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:37:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:37:32 Message to Master queued w/err=0: serial=85131 error=0 10:37:37 Received message from Master: op=Filter serial=85132 10:37:37 Color wheel filter change from 0 to 0 10:37:37 FLIGetFilterPos err=0 currentPosition=0 10:37:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:37 Filter is already there-color wheel unchanged 10:37:37 Received message from Master: op=Shutter serial=85133 10:37:37 Shutter LASER close 10:37:37 Received message from Camera: op=State serial=85135 10:37:37 GetSingleValue result=40 Value=cccccccc 10:37:37 SkyScan query 10:37:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:37:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:37 Parameters OK 10:37:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:37 Set A/D data flow result=40 10:37:37 Set A/D channel type result=40 10:37:37 Set A/D encoding result=40 10:37:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:37 Set channel filter=0.000000e+000 result=40 10:37:37 Config A/D Result=40 10:37:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:37 Get A/D filter: -9.255963e+061 result=40 10:37:37 Get A/D value=-858993460 result=40 10:37:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:37 Parameters OK 10:37:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:37 Set A/D data flow result=40 10:37:37 Set A/D channel type result=40 10:37:37 Set A/D encoding result=40 10:37:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:37 Set channel filter=0.000000e+000 result=40 10:37:37 Config A/D Result=40 10:37:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:37 Get A/D filter: -9.255963e+061 result=40 10:37:37 Get A/D value=-858993460 result=40 10:37:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:37 Aux= 10:37:37 Message to Camera, serial 85135 queued 10:38:14 Received message from Master: op=PointingHead serial=85148 10:38:14 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:38:14 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:38:15 Point started: ret=0 10:38:15 point_skyscan result=0 10:38:15 Check angles 10:38:15 SkyScan query 10:38:16 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 10:38:16 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 10:38:16 Check angles 10:38:16 SkyScan query 10:38:17 SkyScan query done: ret=0 az=153.54<-10236 ze=-6.495<-12433 Statuses=0009 0008 10:38:17 Msec=750 True Az=153.54 Ze=-6.495 Az status=0009 Ze status=0008 10:38:17 Check angles 10:38:17 SkyScan query 10:38:17 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 10:38:17 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 10:38:18 Check angles 10:38:18 SkyScan query 10:38:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:38:18 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:38:18 Message to Master queued w/err=0: serial=85148 error=0 10:38:23 Received message from Master: op=Filter serial=85149 10:38:23 Color wheel filter change from 0 to 0 10:38:23 FLIGetFilterPos err=0 currentPosition=0 10:38:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:38:23 Filter is already there-color wheel unchanged 10:38:23 Received message from Master: op=Shutter serial=85150 10:38:23 Shutter LASER close 10:38:23 Received message from Camera: op=State serial=85152 10:38:23 GetSingleValue result=40 Value=cccccccc 10:38:23 SkyScan query 10:38:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:38:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:24 Parameters OK 10:38:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:24 Set A/D data flow result=40 10:38:24 Set A/D channel type result=40 10:38:24 Set A/D encoding result=40 10:38:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:24 Set channel filter=0.000000e+000 result=40 10:38:24 Config A/D Result=40 10:38:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:24 Get A/D filter: -9.255963e+061 result=40 10:38:24 Get A/D value=-858993460 result=40 10:38:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:24 Parameters OK 10:38:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:24 Set A/D data flow result=40 10:38:24 Set A/D channel type result=40 10:38:24 Set A/D encoding result=40 10:38:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:24 Set channel filter=0.000000e+000 result=40 10:38:24 Config A/D Result=40 10:38:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:24 Get A/D filter: -9.255963e+061 result=40 10:38:24 Get A/D value=-858993460 result=40 10:38:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:38:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:38:24 Aux= 10:38:24 Message to Camera, serial 85152 queued 10:39:01 Received message from Master: op=PointingHead serial=85165 10:39:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:39:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:39:01 Point started: ret=0 10:39:01 point_skyscan result=0 10:39:02 Check angles 10:39:02 SkyScan query 10:39:03 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 10:39:03 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 10:39:03 Check angles 10:39:03 SkyScan query 10:39:03 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 10:39:03 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 10:39:03 Check angles 10:39:03 SkyScan query 10:39:04 SkyScan query done: ret=0 az=117.57<-7838 ze=6.495<-11567 Statuses=0009 0008 10:39:04 Msec=1500 True Az=117.57 Ze=6.495 Az status=0009 Ze status=0008 10:39:04 Check angles 10:39:04 SkyScan query 10:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:39:05 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:39:05 Message to Master queued w/err=0: serial=85165 error=0 10:39:10 Received message from Master: op=Filter serial=85166 10:39:10 Color wheel filter change from 0 to 0 10:39:10 FLIGetFilterPos err=0 currentPosition=0 10:39:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:10 Filter is already there-color wheel unchanged 10:39:10 Received message from Master: op=Shutter serial=85167 10:39:10 Shutter LASER close 10:39:10 Received message from Camera: op=State serial=85169 10:39:10 GetSingleValue result=40 Value=cccccccc 10:39:10 SkyScan query 10:39:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:39:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:11 Parameters OK 10:39:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:11 Set A/D data flow result=40 10:39:11 Set A/D channel type result=40 10:39:11 Set A/D encoding result=40 10:39:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:11 Set channel filter=0.000000e+000 result=40 10:39:11 Config A/D Result=40 10:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:11 Get A/D filter: -9.255963e+061 result=40 10:39:11 Get A/D value=-858993460 result=40 10:39:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:11 Parameters OK 10:39:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:11 Set A/D data flow result=40 10:39:11 Set A/D channel type result=40 10:39:11 Set A/D encoding result=40 10:39:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:11 Set channel filter=0.000000e+000 result=40 10:39:11 Config A/D Result=40 10:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:11 Get A/D filter: -9.255963e+061 result=40 10:39:11 Get A/D value=-858993460 result=40 10:39:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:11 Aux= 10:39:11 Message to Camera, serial 85169 queued 10:39:47 Received message from Master: op=PointingHead serial=85182 10:39:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:39:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:39:48 Point started: ret=0 10:39:48 point_skyscan result=0 10:39:49 Check angles 10:39:49 SkyScan query 10:39:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.61<-13574 Statuses=0008 0009 10:39:49 Msec=0 True Az=112.995 Ze=-23.61 Az status=0008 Ze status=0009 10:39:49 Check angles 10:39:49 SkyScan query 10:39:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 10:39:50 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 10:39:50 Check angles 10:39:50 SkyScan query 10:39:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 10:39:51 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 10:39:51 Check angles 10:39:51 SkyScan query 10:39:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 10:39:51 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 10:39:52 Check angles 10:39:52 SkyScan query 10:39:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 10:39:52 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 10:39:52 Check angles 10:39:52 SkyScan query 10:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.355<-20557 Statuses=0008 0009 10:39:53 Msec=3750 True Az=112.995 Ze=-128.355 Az status=0008 Ze status=0009 10:39:53 Check angles 10:39:53 SkyScan query 10:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.31<-21954 Statuses=0008 0009 10:39:54 Msec=4500 True Az=112.995 Ze=-149.31 Az status=0008 Ze status=0009 10:39:54 Check angles 10:39:54 SkyScan query 10:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 10:39:54 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 10:39:55 Check angles 10:39:55 SkyScan query 10:39:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:39:55 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:39:55 Message to Master queued w/err=0: serial=85182 error=0 10:40:00 Received message from Master: op=Filter serial=85183 10:40:00 Color wheel filter change from 0 to 0 10:40:00 FLIGetFilterPos err=0 currentPosition=0 10:40:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:00 Filter is already there-color wheel unchanged 10:40:00 Received message from Master: op=Shutter serial=85184 10:40:00 Shutter LASER open 10:40:01 Received message from Camera: op=State serial=85186 10:40:01 GetSingleValue result=40 Value=cccccccc 10:40:01 SkyScan query 10:40:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:40:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:01 Parameters OK 10:40:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:01 Set A/D data flow result=40 10:40:01 Set A/D channel type result=40 10:40:01 Set A/D encoding result=40 10:40:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:01 Set channel filter=0.000000e+000 result=40 10:40:01 Config A/D Result=40 10:40:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:01 Get A/D filter: -9.255963e+061 result=40 10:40:01 Get A/D value=-858993460 result=40 10:40:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:01 Parameters OK 10:40:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:01 Set A/D data flow result=40 10:40:01 Set A/D channel type result=40 10:40:01 Set A/D encoding result=40 10:40:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:01 Set channel filter=0.000000e+000 result=40 10:40:01 Config A/D Result=40 10:40:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:01 Get A/D filter: -9.255963e+061 result=40 10:40:01 Get A/D value=-858993460 result=40 10:40:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:01 Aux= 10:40:01 Message to Camera, serial 85186 queued 10:40:10 Received message from Master: op=Shutter serial=85196 10:40:10 Shutter LASER close 10:40:10 Received message from Master: op=PointingHead serial=85200 10:40:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:40:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:40:10 Point started: ret=0 10:40:10 point_skyscan result=0 10:40:11 Check angles 10:40:11 SkyScan query 10:40:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 10:40:12 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 10:40:12 Check angles 10:40:12 SkyScan query 10:40:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.43<-20162 Statuses=0008 0009 10:40:12 Msec=750 True Az=112.995 Ze=-122.43 Az status=0008 Ze status=0009 10:40:13 Check angles 10:40:13 SkyScan query 10:40:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 10:40:13 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 10:40:13 Check angles 10:40:13 SkyScan query 10:40:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.49<-17366 Statuses=0008 0009 10:40:14 Msec=2250 True Az=112.995 Ze=-80.49 Az status=0008 Ze status=0009 10:40:14 Check angles 10:40:14 SkyScan query 10:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.55<-15970 Statuses=0008 0009 10:40:15 Msec=3000 True Az=112.995 Ze=-59.55 Az status=0008 Ze status=0009 10:40:15 Check angles 10:40:15 SkyScan query 10:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 10:40:15 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 10:40:16 Check angles 10:40:16 SkyScan query 10:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.755<-13117 Statuses=0008 0009 10:40:16 Msec=4500 True Az=112.995 Ze=-16.755 Az status=0008 Ze status=0009 10:40:16 Check angles 10:40:16 SkyScan query 10:40:17 SkyScan query done: ret=0 az=112.995<-7533 ze=4.515<-11699 Statuses=0008 0009 10:40:17 Msec=5250 True Az=112.995 Ze=4.515 Az status=0008 Ze status=0009 10:40:17 Check angles 10:40:17 SkyScan query 10:40:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:40:18 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:40:18 Message to Master queued w/err=0: serial=85200 error=0 10:40:23 Received message from Master: op=Filter serial=85201 10:40:23 Color wheel filter change from 0 to 0 10:40:23 FLIGetFilterPos err=0 currentPosition=0 10:40:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:23 Filter is already there-color wheel unchanged 10:40:23 Received message from Master: op=Shutter serial=85202 10:40:23 Shutter LASER close 10:40:23 Received message from Camera: op=State serial=85204 10:40:23 GetSingleValue result=40 Value=cccccccc 10:40:23 SkyScan query 10:40:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:40:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:24 Parameters OK 10:40:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:24 Set A/D data flow result=40 10:40:24 Set A/D channel type result=40 10:40:24 Set A/D encoding result=40 10:40:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:24 Set channel filter=0.000000e+000 result=40 10:40:24 Config A/D Result=40 10:40:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:24 Get A/D filter: -9.255963e+061 result=40 10:40:24 Get A/D value=-858993460 result=40 10:40:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:24 Parameters OK 10:40:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:24 Set A/D data flow result=40 10:40:24 Set A/D channel type result=40 10:40:24 Set A/D encoding result=40 10:40:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:24 Set channel filter=0.000000e+000 result=40 10:40:24 Config A/D Result=40 10:40:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:24 Get A/D filter: -9.255963e+061 result=40 10:40:24 Get A/D value=-858993460 result=40 10:40:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:24 Aux= 10:40:24 Message to Camera, serial 85204 queued 10:41:00 Received message from Master: op=PointingHead serial=85217 10:41:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:41:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:41:01 Point started: ret=0 10:41:01 point_skyscan result=0 10:41:02 Check angles 10:41:02 SkyScan query 10:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:41:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:41:02 Message to Master queued w/err=0: serial=85217 error=0 10:41:07 Received message from Master: op=Filter serial=85218 10:41:07 Color wheel filter change from 0 to 0 10:41:07 FLIGetFilterPos err=0 currentPosition=0 10:41:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:07 Filter is already there-color wheel unchanged 10:41:07 Received message from Master: op=Shutter serial=85219 10:41:07 Shutter LASER close 10:41:07 Received message from Camera: op=State serial=85221 10:41:07 GetSingleValue result=40 Value=cccccccc 10:41:07 SkyScan query 10:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:41:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:08 Parameters OK 10:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:08 Set A/D data flow result=40 10:41:08 Set A/D channel type result=40 10:41:08 Set A/D encoding result=40 10:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:08 Set channel filter=0.000000e+000 result=40 10:41:08 Config A/D Result=40 10:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:08 Get A/D filter: -9.255963e+061 result=40 10:41:08 Get A/D value=-858993460 result=40 10:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:08 Parameters OK 10:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:08 Set A/D data flow result=40 10:41:08 Set A/D channel type result=40 10:41:08 Set A/D encoding result=40 10:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:08 Set channel filter=0.000000e+000 result=40 10:41:08 Config A/D Result=40 10:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:08 Get A/D filter: -9.255963e+061 result=40 10:41:08 Get A/D value=-858993460 result=40 10:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:08 Aux= 10:41:08 Message to Camera, serial 85221 queued 10:41:45 Received message from Master: op=PointingHead serial=85234 10:41:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:41:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:41:45 Point started: ret=0 10:41:45 point_skyscan result=0 10:41:46 Check angles 10:41:46 SkyScan query 10:41:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:41:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:41:46 Message to Master queued w/err=0: serial=85234 error=0 10:41:51 Received message from Master: op=Filter serial=85235 10:41:51 Color wheel filter change from 0 to 0 10:41:51 FLIGetFilterPos err=0 currentPosition=0 10:41:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:51 Filter is already there-color wheel unchanged 10:41:52 Received message from Master: op=Shutter serial=85236 10:41:52 Shutter LASER close 10:41:52 Received message from Camera: op=State serial=85238 10:41:52 GetSingleValue result=40 Value=cccccccc 10:41:52 SkyScan query 10:41:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:41:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:52 Parameters OK 10:41:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:52 Set A/D data flow result=40 10:41:52 Set A/D channel type result=40 10:41:52 Set A/D encoding result=40 10:41:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:52 Set channel filter=0.000000e+000 result=40 10:41:52 Config A/D Result=40 10:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:52 Get A/D filter: -9.255963e+061 result=40 10:41:52 Get A/D value=-858993460 result=40 10:41:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:52 Parameters OK 10:41:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:52 Set A/D data flow result=40 10:41:52 Set A/D channel type result=40 10:41:52 Set A/D encoding result=40 10:41:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:52 Set channel filter=0.000000e+000 result=40 10:41:52 Config A/D Result=40 10:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:52 Get A/D filter: -9.255963e+061 result=40 10:41:52 Get A/D value=-858993460 result=40 10:41:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:52 Aux= 10:41:52 Message to Camera, serial 85238 queued 10:42:29 Received message from Master: op=PointingHead serial=85251 10:42:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:42:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:42:29 Point started: ret=0 10:42:29 point_skyscan result=0 10:42:30 Check angles 10:42:30 SkyScan query 10:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:42:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:42:31 Message to Master queued w/err=0: serial=85251 error=0 10:42:36 Received message from Master: op=Filter serial=85252 10:42:36 Color wheel filter change from 0 to 0 10:42:36 FLIGetFilterPos err=0 currentPosition=0 10:42:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:36 Filter is already there-color wheel unchanged 10:42:36 Received message from Master: op=Shutter serial=85253 10:42:36 Shutter LASER close 10:42:36 Received message from Camera: op=State serial=85255 10:42:36 GetSingleValue result=40 Value=cccccccc 10:42:36 SkyScan query 10:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:42:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:37 Parameters OK 10:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:37 Set A/D data flow result=40 10:42:37 Set A/D channel type result=40 10:42:37 Set A/D encoding result=40 10:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:37 Set channel filter=0.000000e+000 result=40 10:42:37 Config A/D Result=40 10:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:37 Get A/D filter: -9.255963e+061 result=40 10:42:37 Get A/D value=-858993460 result=40 10:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:37 Parameters OK 10:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:37 Set A/D data flow result=40 10:42:37 Set A/D channel type result=40 10:42:37 Set A/D encoding result=40 10:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:37 Set channel filter=0.000000e+000 result=40 10:42:37 Config A/D Result=40 10:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:37 Get A/D filter: -9.255963e+061 result=40 10:42:37 Get A/D value=-858993460 result=40 10:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:37 Aux= 10:42:37 Message to Camera, serial 85255 queued 10:43:13 Received message from Master: op=PointingHead serial=85268 10:43:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:43:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:43:14 Point started: ret=0 10:43:14 point_skyscan result=0 10:43:15 Check angles 10:43:15 SkyScan query 10:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 10:43:15 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 10:43:15 Check angles 10:43:15 SkyScan query 10:43:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 10:43:16 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 10:43:16 Check angles 10:43:16 SkyScan query 10:43:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.805<-16387 Statuses=0008 0009 10:43:17 Msec=1500 True Az=112.995 Ze=-65.805 Az status=0008 Ze status=0009 10:43:17 Check angles 10:43:17 SkyScan query 10:43:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.76<-17784 Statuses=0008 0009 10:43:17 Msec=2250 True Az=112.995 Ze=-86.76 Az status=0008 Ze status=0009 10:43:18 Check angles 10:43:18 SkyScan query 10:43:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.73<-19182 Statuses=0008 0009 10:43:18 Msec=3000 True Az=112.995 Ze=-107.73 Az status=0008 Ze status=0009 10:43:18 Check angles 10:43:18 SkyScan query 10:43:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.105<-20607 Statuses=0008 0009 10:43:19 Msec=3750 True Az=112.995 Ze=-129.105 Az status=0008 Ze status=0009 10:43:19 Check angles 10:43:19 SkyScan query 10:43:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.06<-22004 Statuses=0008 0009 10:43:20 Msec=4500 True Az=112.995 Ze=-150.06 Az status=0008 Ze status=0009 10:43:20 Check angles 10:43:20 SkyScan query 10:43:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 10:43:20 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 10:43:21 Check angles 10:43:21 SkyScan query 10:43:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:43:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:43:21 Message to Master queued w/err=0: serial=85268 error=0 10:43:26 Received message from Master: op=Filter serial=85269 10:43:26 Color wheel filter change from 0 to 0 10:43:26 FLIGetFilterPos err=0 currentPosition=0 10:43:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:26 Filter is already there-color wheel unchanged 10:43:26 Received message from Master: op=Shutter serial=85270 10:43:26 Shutter LASER open 10:43:26 Received message from Camera: op=State serial=85272 10:43:26 GetSingleValue result=40 Value=cccccccc 10:43:26 SkyScan query 10:43:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:43:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:27 Parameters OK 10:43:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:27 Set A/D data flow result=40 10:43:27 Set A/D channel type result=40 10:43:27 Set A/D encoding result=40 10:43:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:27 Set channel filter=0.000000e+000 result=40 10:43:27 Config A/D Result=40 10:43:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:27 Get A/D filter: -9.255963e+061 result=40 10:43:27 Get A/D value=-858993460 result=40 10:43:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:27 Parameters OK 10:43:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:27 Set A/D data flow result=40 10:43:27 Set A/D channel type result=40 10:43:27 Set A/D encoding result=40 10:43:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:27 Set channel filter=0.000000e+000 result=40 10:43:27 Config A/D Result=40 10:43:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:27 Get A/D filter: -9.255963e+061 result=40 10:43:27 Get A/D value=-858993460 result=40 10:43:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:27 Aux= 10:43:27 Message to Camera, serial 85272 queued 10:43:35 Received message from Master: op=Shutter serial=85282 10:43:35 Shutter LASER close 10:43:36 Received message from Master: op=PointingHead serial=85286 10:43:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:43:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:43:36 Point started: ret=0 10:43:36 point_skyscan result=0 10:43:37 Check angles 10:43:37 SkyScan query 10:43:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 10:43:38 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 10:43:38 Check angles 10:43:38 SkyScan query 10:43:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.22<-20148 Statuses=0008 0009 10:43:38 Msec=750 True Az=112.995 Ze=-122.22 Az status=0008 Ze status=0009 10:43:39 Check angles 10:43:39 SkyScan query 10:43:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 10:43:39 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 10:43:39 Check angles 10:43:39 SkyScan query 10:43:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.31<-17354 Statuses=0008 0009 10:43:40 Msec=2250 True Az=112.995 Ze=-80.31 Az status=0008 Ze status=0009 10:43:40 Check angles 10:43:40 SkyScan query 10:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 10:43:41 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 10:43:41 Check angles 10:43:41 SkyScan query 10:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.95<-14530 Statuses=0008 0009 10:43:41 Msec=3750 True Az=112.995 Ze=-37.95 Az status=0008 Ze status=0009 10:43:42 Check angles 10:43:42 SkyScan query 10:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.01<-13134 Statuses=0008 0009 10:43:42 Msec=4500 True Az=112.995 Ze=-17.01 Az status=0008 Ze status=0009 10:43:42 Check angles 10:43:42 SkyScan query 10:43:43 SkyScan query done: ret=0 az=112.995<-7533 ze=3.945<-11737 Statuses=0008 0009 10:43:43 Msec=5250 True Az=112.995 Ze=3.945 Az status=0008 Ze status=0009 10:43:43 Check angles 10:43:43 SkyScan query 10:43:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:43:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:43:44 Message to Master queued w/err=0: serial=85286 error=0 10:43:49 Received message from Master: op=Filter serial=85287 10:43:49 Color wheel filter change from 0 to 0 10:43:49 FLIGetFilterPos err=0 currentPosition=0 10:43:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:49 Filter is already there-color wheel unchanged 10:43:49 Received message from Master: op=Shutter serial=85288 10:43:49 Shutter LASER close 10:43:49 Received message from Camera: op=State serial=85290 10:43:49 GetSingleValue result=40 Value=cccccccc 10:43:49 SkyScan query 10:43:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:43:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:50 Parameters OK 10:43:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:50 Set A/D data flow result=40 10:43:50 Set A/D channel type result=40 10:43:50 Set A/D encoding result=40 10:43:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:50 Set channel filter=0.000000e+000 result=40 10:43:50 Config A/D Result=40 10:43:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:50 Get A/D filter: -9.255963e+061 result=40 10:43:50 Get A/D value=-858993460 result=40 10:43:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:50 Parameters OK 10:43:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:50 Set A/D data flow result=40 10:43:50 Set A/D channel type result=40 10:43:50 Set A/D encoding result=40 10:43:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:50 Set channel filter=0.000000e+000 result=40 10:43:50 Config A/D Result=40 10:43:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:50 Get A/D filter: -9.255963e+061 result=40 10:43:50 Get A/D value=-858993460 result=40 10:43:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:50 Aux= 10:43:50 Message to Camera, serial 85290 queued [UTC 2019-3-3 10:43:50] 10:44:26 Received message from Master: op=PointingHead serial=85303 10:44:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:44:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:44:27 Point started: ret=0 10:44:27 point_skyscan result=0 10:44:28 Check angles 10:44:28 SkyScan query 10:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:44:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:44:28 Message to Master queued w/err=0: serial=85303 error=0 10:44:33 Received message from Master: op=Filter serial=85304 10:44:33 Color wheel filter change from 0 to 0 10:44:33 FLIGetFilterPos err=0 currentPosition=0 10:44:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:33 Filter is already there-color wheel unchanged 10:44:33 Received message from Master: op=Shutter serial=85305 10:44:33 Shutter LASER close 10:44:33 Received message from Camera: op=State serial=85307 10:44:33 GetSingleValue result=40 Value=cccccccc 10:44:33 SkyScan query 10:44:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:44:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:34 Parameters OK 10:44:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:34 Set A/D data flow result=40 10:44:34 Set A/D channel type result=40 10:44:34 Set A/D encoding result=40 10:44:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:34 Set channel filter=0.000000e+000 result=40 10:44:34 Config A/D Result=40 10:44:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:34 Get A/D filter: -9.255963e+061 result=40 10:44:34 Get A/D value=-858993460 result=40 10:44:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:34 Parameters OK 10:44:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:34 Set A/D data flow result=40 10:44:34 Set A/D channel type result=40 10:44:34 Set A/D encoding result=40 10:44:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:34 Set channel filter=0.000000e+000 result=40 10:44:34 Config A/D Result=40 10:44:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:34 Get A/D filter: -9.255963e+061 result=40 10:44:34 Get A/D value=-858993460 result=40 10:44:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:34 Aux= 10:44:34 Message to Camera, serial 85307 queued 10:45:11 Received message from Master: op=PointingHead serial=85320 10:45:11 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:45:11 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:45:11 Point started: ret=0 10:45:11 point_skyscan result=0 10:45:12 Check angles 10:45:12 SkyScan query 10:45:13 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 10:45:13 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 10:45:13 Check angles 10:45:13 SkyScan query 10:45:13 SkyScan query done: ret=0 az=153.825<-10255 ze=-6.495<-12433 Statuses=0009 0008 10:45:13 Msec=750 True Az=153.825 Ze=-6.495 Az status=0009 Ze status=0008 10:45:13 Check angles 10:45:13 SkyScan query 10:45:14 SkyScan query done: ret=0 az=171.645<-11443 ze=-6.495<-12433 Statuses=0009 0008 10:45:14 Msec=1500 True Az=171.645 Ze=-6.495 Az status=0009 Ze status=0008 10:45:14 Check angles 10:45:14 SkyScan query 10:45:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:45:15 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:45:15 Message to Master queued w/err=0: serial=85320 error=0 10:45:20 Received message from Master: op=Filter serial=85321 10:45:20 Color wheel filter change from 0 to 0 10:45:20 FLIGetFilterPos err=0 currentPosition=0 10:45:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:20 Filter is already there-color wheel unchanged 10:45:20 Received message from Master: op=Shutter serial=85322 10:45:20 Shutter LASER close 10:45:20 Received message from Camera: op=State serial=85324 10:45:20 GetSingleValue result=40 Value=cccccccc 10:45:20 SkyScan query 10:45:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:45:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:21 Parameters OK 10:45:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:21 Set A/D data flow result=40 10:45:21 Set A/D channel type result=40 10:45:21 Set A/D encoding result=40 10:45:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:21 Set channel filter=0.000000e+000 result=40 10:45:21 Config A/D Result=40 10:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:21 Get A/D filter: -9.255963e+061 result=40 10:45:21 Get A/D value=-858993460 result=40 10:45:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:21 Parameters OK 10:45:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:21 Set A/D data flow result=40 10:45:21 Set A/D channel type result=40 10:45:21 Set A/D encoding result=40 10:45:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:21 Set channel filter=0.000000e+000 result=40 10:45:21 Config A/D Result=40 10:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:21 Get A/D filter: -9.255963e+061 result=40 10:45:21 Get A/D value=-858993460 result=40 10:45:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:45:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:45:21 Aux= 10:45:21 Message to Camera, serial 85324 queued 10:45:57 Received message from Master: op=PointingHead serial=85337 10:45:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:45:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:45:58 Point started: ret=0 10:45:58 point_skyscan result=0 10:45:59 Check angles 10:45:59 SkyScan query 10:45:59 SkyScan query done: ret=0 az=152.7<-10180 ze=6.51<-11566 Statuses=0009 0008 10:45:59 Msec=0 True Az=152.7 Ze=6.51 Az status=0009 Ze status=0008 10:45:59 Check angles 10:45:59 SkyScan query 10:46:00 SkyScan query done: ret=0 az=135.18<-9012 ze=6.495<-11567 Statuses=0009 0008 10:46:00 Msec=750 True Az=135.18 Ze=6.495 Az status=0009 Ze status=0008 10:46:00 Check angles 10:46:00 SkyScan query 10:46:01 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 10:46:01 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 10:46:01 Check angles 10:46:01 SkyScan query 10:46:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:46:01 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:46:01 Message to Master queued w/err=0: serial=85337 error=0 10:46:06 Received message from Master: op=Filter serial=85338 10:46:06 Color wheel filter change from 0 to 0 10:46:06 FLIGetFilterPos err=0 currentPosition=0 10:46:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:06 Filter is already there-color wheel unchanged 10:46:07 Received message from Master: op=Shutter serial=85339 10:46:07 Shutter LASER close 10:46:07 Received message from Camera: op=State serial=85341 10:46:07 GetSingleValue result=40 Value=cccccccc 10:46:07 SkyScan query 10:46:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:46:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:07 Parameters OK 10:46:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:07 Set A/D data flow result=40 10:46:07 Set A/D channel type result=40 10:46:07 Set A/D encoding result=40 10:46:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:07 Set channel filter=0.000000e+000 result=40 10:46:07 Config A/D Result=40 10:46:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:07 Get A/D filter: -9.255963e+061 result=40 10:46:07 Get A/D value=-858993460 result=40 10:46:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:07 Parameters OK 10:46:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:07 Set A/D data flow result=40 10:46:07 Set A/D channel type result=40 10:46:07 Set A/D encoding result=40 10:46:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:07 Set channel filter=0.000000e+000 result=40 10:46:07 Config A/D Result=40 10:46:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:07 Get A/D filter: -9.255963e+061 result=40 10:46:07 Get A/D value=-858993460 result=40 10:46:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:07 Aux= 10:46:07 Message to Camera, serial 85341 queued 10:46:43 Received message from Master: op=PointingHead serial=85353 10:46:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:46:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:46:43 Point started: ret=0 10:46:43 point_skyscan result=0 10:46:44 Check angles 10:46:44 SkyScan query 10:46:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 10:46:45 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 10:46:45 Check angles 10:46:45 SkyScan query 10:46:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 10:46:45 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 10:46:46 Check angles 10:46:46 SkyScan query 10:46:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.235<-16349 Statuses=0008 0009 10:46:46 Msec=1500 True Az=112.995 Ze=-65.235 Az status=0008 Ze status=0009 10:46:46 Check angles 10:46:46 SkyScan query 10:46:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 10:46:47 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 10:46:47 Check angles 10:46:47 SkyScan query 10:46:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.58<-19172 Statuses=0008 0009 10:46:48 Msec=3000 True Az=112.995 Ze=-107.58 Az status=0008 Ze status=0009 10:46:48 Check angles 10:46:48 SkyScan query 10:46:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.505<-20567 Statuses=0008 0009 10:46:48 Msec=3750 True Az=112.995 Ze=-128.505 Az status=0008 Ze status=0009 10:46:49 Check angles 10:46:49 SkyScan query 10:46:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.91<-21994 Statuses=0008 0009 10:46:49 Msec=4500 True Az=112.995 Ze=-149.91 Az status=0008 Ze status=0009 10:46:49 Check angles 10:46:49 SkyScan query 10:46:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0008 0009 10:46:50 Msec=5250 True Az=112.995 Ze=-171.12 Az status=0008 Ze status=0009 10:46:50 Check angles 10:46:50 SkyScan query 10:46:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:46:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:46:51 Message to Master queued w/err=0: serial=85353 error=0 10:46:56 Received message from Master: op=Filter serial=85354 10:46:56 Color wheel filter change from 0 to 0 10:46:56 FLIGetFilterPos err=0 currentPosition=0 10:46:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:56 Filter is already there-color wheel unchanged 10:46:56 Received message from Master: op=Shutter serial=85355 10:46:56 Shutter LASER open 10:46:56 Received message from Camera: op=State serial=85357 10:46:56 GetSingleValue result=40 Value=cccccccc 10:46:56 SkyScan query 10:46:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:46:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:57 Parameters OK 10:46:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:57 Set A/D data flow result=40 10:46:57 Set A/D channel type result=40 10:46:57 Set A/D encoding result=40 10:46:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:57 Set channel filter=0.000000e+000 result=40 10:46:57 Config A/D Result=40 10:46:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:57 Get A/D filter: -9.255963e+061 result=40 10:46:57 Get A/D value=-858993460 result=40 10:46:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:57 Parameters OK 10:46:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:57 Set A/D data flow result=40 10:46:57 Set A/D channel type result=40 10:46:57 Set A/D encoding result=40 10:46:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:57 Set channel filter=0.000000e+000 result=40 10:46:57 Config A/D Result=40 10:46:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:57 Get A/D filter: -9.255963e+061 result=40 10:46:57 Get A/D value=-858993460 result=40 10:46:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:57 Aux= 10:46:57 Message to Camera, serial 85357 queued 10:47:05 Received message from Master: op=Shutter serial=85367 10:47:05 Shutter LASER close 10:47:06 Received message from Master: op=PointingHead serial=85371 10:47:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:47:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:47:06 Point started: ret=0 10:47:06 point_skyscan result=0 10:47:07 Check angles 10:47:07 SkyScan query 10:47:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 10:47:07 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 10:47:07 Check angles 10:47:07 SkyScan query 10:47:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.355<-20157 Statuses=0008 0009 10:47:08 Msec=750 True Az=112.995 Ze=-122.355 Az status=0008 Ze status=0009 10:47:08 Check angles 10:47:08 SkyScan query 10:47:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 10:47:09 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 10:47:09 Check angles 10:47:09 SkyScan query 10:47:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.575<-17305 Statuses=0008 0009 10:47:10 Msec=2250 True Az=112.995 Ze=-79.575 Az status=0008 Ze status=0009 10:47:10 Check angles 10:47:10 SkyScan query 10:47:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.635<-15909 Statuses=0008 0009 10:47:10 Msec=3000 True Az=112.995 Ze=-58.635 Az status=0008 Ze status=0009 10:47:10 Check angles 10:47:10 SkyScan query 10:47:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.665<-14511 Statuses=0008 0009 10:47:11 Msec=3750 True Az=112.995 Ze=-37.665 Az status=0008 Ze status=0009 10:47:11 Check angles 10:47:11 SkyScan query 10:47:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.695<-13113 Statuses=0008 0009 10:47:12 Msec=4500 True Az=112.995 Ze=-16.695 Az status=0008 Ze status=0009 10:47:12 Check angles 10:47:12 SkyScan query 10:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.215<-11719 Statuses=0008 0009 10:47:13 Msec=5250 True Az=112.995 Ze=4.215 Az status=0008 Ze status=0009 10:47:13 Check angles 10:47:13 SkyScan query 10:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:47:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:47:13 Message to Master queued w/err=0: serial=85371 error=0 10:47:18 Received message from Master: op=Filter serial=85372 10:47:18 Color wheel filter change from 0 to 0 10:47:18 FLIGetFilterPos err=0 currentPosition=0 10:47:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:18 Filter is already there-color wheel unchanged 10:47:18 Received message from Master: op=Shutter serial=85373 10:47:18 Shutter LASER close 10:47:19 Received message from Camera: op=State serial=85375 10:47:19 GetSingleValue result=40 Value=cccccccc 10:47:19 SkyScan query 10:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:19 Parameters OK 10:47:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:19 Set A/D data flow result=40 10:47:19 Set A/D channel type result=40 10:47:19 Set A/D encoding result=40 10:47:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:19 Set channel filter=0.000000e+000 result=40 10:47:19 Config A/D Result=40 10:47:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:19 Get A/D filter: -9.255963e+061 result=40 10:47:19 Get A/D value=-858993460 result=40 10:47:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:19 Parameters OK 10:47:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:19 Set A/D data flow result=40 10:47:19 Set A/D channel type result=40 10:47:19 Set A/D encoding result=40 10:47:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:19 Set channel filter=0.000000e+000 result=40 10:47:19 Config A/D Result=40 10:47:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:19 Get A/D filter: -9.255963e+061 result=40 10:47:19 Get A/D value=-858993460 result=40 10:47:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:19 Aux= 10:47:19 Message to Camera, serial 85375 queued 10:47:56 Received message from Master: op=PointingHead serial=85388 10:47:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:47:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:47:56 Point started: ret=0 10:47:56 point_skyscan result=0 10:47:57 Check angles 10:47:57 SkyScan query 10:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:47:58 Message to Master queued w/err=0: serial=85388 error=0 10:48:03 Received message from Master: op=Filter serial=85389 10:48:03 Color wheel filter change from 0 to 0 10:48:03 FLIGetFilterPos err=0 currentPosition=0 10:48:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:03 Filter is already there-color wheel unchanged 10:48:03 Received message from Master: op=Shutter serial=85390 10:48:03 Shutter LASER close 10:48:03 Received message from Camera: op=State serial=85392 10:48:03 GetSingleValue result=40 Value=cccccccc 10:48:03 SkyScan query 10:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:48:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:04 Parameters OK 10:48:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:04 Set A/D data flow result=40 10:48:04 Set A/D channel type result=40 10:48:04 Set A/D encoding result=40 10:48:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:04 Set channel filter=0.000000e+000 result=40 10:48:04 Config A/D Result=40 10:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:04 Get A/D filter: -9.255963e+061 result=40 10:48:04 Get A/D value=-858993460 result=40 10:48:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:04 Parameters OK 10:48:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:04 Set A/D data flow result=40 10:48:04 Set A/D channel type result=40 10:48:04 Set A/D encoding result=40 10:48:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:04 Set channel filter=0.000000e+000 result=40 10:48:04 Config A/D Result=40 10:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:04 Get A/D filter: -9.255963e+061 result=40 10:48:04 Get A/D value=-858993460 result=40 10:48:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:04 Aux= 10:48:04 Message to Camera, serial 85392 queued 10:48:40 Received message from Master: op=PointingHead serial=85405 10:48:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:48:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:48:41 Point started: ret=0 10:48:41 point_skyscan result=0 10:48:41 Check angles 10:48:41 SkyScan query 10:48:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:48:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:48:42 Message to Master queued w/err=0: serial=85405 error=0 10:48:47 Received message from Master: op=Filter serial=85406 10:48:47 Color wheel filter change from 0 to 0 10:48:47 FLIGetFilterPos err=0 currentPosition=0 10:48:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:47 Filter is already there-color wheel unchanged 10:48:47 Received message from Master: op=Shutter serial=85407 10:48:47 Shutter LASER close 10:48:47 Received message from Camera: op=State serial=85409 10:48:47 GetSingleValue result=40 Value=cccccccc 10:48:47 SkyScan query 10:48:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:48:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:48 Parameters OK 10:48:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:48 Set A/D data flow result=40 10:48:48 Set A/D channel type result=40 10:48:48 Set A/D encoding result=40 10:48:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:48 Set channel filter=0.000000e+000 result=40 10:48:48 Config A/D Result=40 10:48:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:48 Get A/D filter: -9.255963e+061 result=40 10:48:48 Get A/D value=-858993460 result=40 10:48:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:48 Parameters OK 10:48:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:48 Set A/D data flow result=40 10:48:48 Set A/D channel type result=40 10:48:48 Set A/D encoding result=40 10:48:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:48 Set channel filter=0.000000e+000 result=40 10:48:48 Config A/D Result=40 10:48:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:48 Get A/D filter: -9.255963e+061 result=40 10:48:48 Get A/D value=-858993460 result=40 10:48:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:48 Aux= 10:48:48 Message to Camera, serial 85409 queued 10:49:25 Received message from Master: op=PointingHead serial=85422 10:49:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:49:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:49:25 Point started: ret=0 10:49:25 point_skyscan result=0 10:49:26 Check angles 10:49:26 SkyScan query 10:49:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:49:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:49:26 Message to Master queued w/err=0: serial=85422 error=0 10:49:31 Received message from Master: op=Filter serial=85423 10:49:31 Color wheel filter change from 0 to 0 10:49:31 FLIGetFilterPos err=0 currentPosition=0 10:49:31 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:31 Filter is already there-color wheel unchanged 10:49:32 Received message from Master: op=Shutter serial=85424 10:49:32 Shutter LASER close 10:49:32 Received message from Camera: op=State serial=85426 10:49:32 GetSingleValue result=40 Value=cccccccc 10:49:32 SkyScan query 10:49:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:49:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:32 Parameters OK 10:49:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:32 Set A/D data flow result=40 10:49:32 Set A/D channel type result=40 10:49:32 Set A/D encoding result=40 10:49:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:32 Set channel filter=0.000000e+000 result=40 10:49:32 Config A/D Result=40 10:49:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:32 Get A/D filter: -9.255963e+061 result=40 10:49:32 Get A/D value=-858993460 result=40 10:49:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:32 Parameters OK 10:49:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:32 Set A/D data flow result=40 10:49:32 Set A/D channel type result=40 10:49:32 Set A/D encoding result=40 10:49:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:32 Set channel filter=0.000000e+000 result=40 10:49:32 Config A/D Result=40 10:49:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:32 Get A/D filter: -9.255963e+061 result=40 10:49:32 Get A/D value=-858993460 result=40 10:49:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:32 Aux= 10:49:32 Message to Camera, serial 85426 queued 10:50:09 Received message from Master: op=PointingHead serial=85439 10:50:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:50:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:50:09 Point started: ret=0 10:50:09 point_skyscan result=0 10:50:10 Check angles 10:50:10 SkyScan query 10:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.805<-13587 Statuses=0008 0009 10:50:11 Msec=0 True Az=112.995 Ze=-23.805 Az status=0008 Ze status=0009 10:50:11 Check angles 10:50:11 SkyScan query 10:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 10:50:11 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 10:50:12 Check angles 10:50:12 SkyScan query 10:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 10:50:12 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 10:50:12 Check angles 10:50:12 SkyScan query 10:50:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 10:50:13 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 10:50:13 Check angles 10:50:13 SkyScan query 10:50:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.595<-19173 Statuses=0008 0009 10:50:14 Msec=3000 True Az=112.995 Ze=-107.595 Az status=0008 Ze status=0009 10:50:14 Check angles 10:50:14 SkyScan query 10:50:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.955<-20597 Statuses=0008 0009 10:50:14 Msec=3750 True Az=112.995 Ze=-128.955 Az status=0008 Ze status=0009 10:50:15 Check angles 10:50:15 SkyScan query 10:50:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.94<-21996 Statuses=0008 0009 10:50:15 Msec=4500 True Az=112.995 Ze=-149.94 Az status=0008 Ze status=0009 10:50:15 Check angles 10:50:15 SkyScan query 10:50:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.82<-23388 Statuses=0008 0009 10:50:16 Msec=5250 True Az=112.995 Ze=-170.82 Az status=0008 Ze status=0009 10:50:16 Check angles 10:50:16 SkyScan query 10:50:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:50:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:50:17 Message to Master queued w/err=0: serial=85439 error=0 10:50:22 Received message from Master: op=Filter serial=85440 10:50:22 Color wheel filter change from 0 to 0 10:50:22 FLIGetFilterPos err=0 currentPosition=0 10:50:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:22 Filter is already there-color wheel unchanged 10:50:22 Received message from Master: op=Shutter serial=85441 10:50:22 Shutter LASER open 10:50:22 Received message from Camera: op=State serial=85443 10:50:22 GetSingleValue result=40 Value=cccccccc 10:50:22 SkyScan query 10:50:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:50:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:23 Parameters OK 10:50:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:23 Set A/D data flow result=40 10:50:23 Set A/D channel type result=40 10:50:23 Set A/D encoding result=40 10:50:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:23 Set channel filter=0.000000e+000 result=40 10:50:23 Config A/D Result=40 10:50:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:23 Get A/D filter: -9.255963e+061 result=40 10:50:23 Get A/D value=-858993460 result=40 10:50:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:23 Parameters OK 10:50:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:23 Set A/D data flow result=40 10:50:23 Set A/D channel type result=40 10:50:23 Set A/D encoding result=40 10:50:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:23 Set channel filter=0.000000e+000 result=40 10:50:23 Config A/D Result=40 10:50:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:23 Get A/D filter: -9.255963e+061 result=40 10:50:23 Get A/D value=-858993460 result=40 10:50:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:23 Aux= 10:50:23 Message to Camera, serial 85443 queued 10:50:31 Received message from Master: op=Shutter serial=85453 10:50:31 Shutter LASER close 10:50:32 Received message from Master: op=PointingHead serial=85457 10:50:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:50:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:50:32 Point started: ret=0 10:50:32 point_skyscan result=0 10:50:33 Check angles 10:50:33 SkyScan query 10:50:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 10:50:33 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 10:50:34 Check angles 10:50:34 SkyScan query 10:50:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 10:50:34 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 10:50:34 Check angles 10:50:34 SkyScan query 10:50:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.25<-18750 Statuses=0008 0009 10:50:35 Msec=1500 True Az=112.995 Ze=-101.25 Az status=0008 Ze status=0009 10:50:35 Check angles 10:50:35 SkyScan query 10:50:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.845<-17323 Statuses=0008 0009 10:50:36 Msec=2250 True Az=112.995 Ze=-79.845 Az status=0008 Ze status=0009 10:50:36 Check angles 10:50:36 SkyScan query 10:50:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.905<-15927 Statuses=0008 0009 10:50:36 Msec=3000 True Az=112.995 Ze=-58.905 Az status=0008 Ze status=0009 10:50:37 Check angles 10:50:37 SkyScan query 10:50:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.515<-14501 Statuses=0008 0009 10:50:37 Msec=3750 True Az=112.995 Ze=-37.515 Az status=0008 Ze status=0009 10:50:37 Check angles 10:50:37 SkyScan query 10:50:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.545<-13103 Statuses=0008 0009 10:50:38 Msec=4500 True Az=112.995 Ze=-16.545 Az status=0008 Ze status=0009 10:50:38 Check angles 10:50:38 SkyScan query 10:50:39 SkyScan query done: ret=0 az=112.995<-7533 ze=4.35<-11710 Statuses=0008 0009 10:50:39 Msec=5250 True Az=112.995 Ze=4.35 Az status=0008 Ze status=0009 10:50:39 Check angles 10:50:39 SkyScan query 10:50:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:50:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:50:39 Message to Master queued w/err=0: serial=85457 error=0 10:50:44 Received message from Master: op=Filter serial=85458 10:50:44 Color wheel filter change from 0 to 0 10:50:44 FLIGetFilterPos err=0 currentPosition=0 10:50:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:44 Filter is already there-color wheel unchanged 10:50:45 Received message from Master: op=Shutter serial=85459 10:50:45 Shutter LASER close 10:50:45 Received message from Camera: op=State serial=85461 10:50:45 GetSingleValue result=40 Value=cccccccc 10:50:45 SkyScan query 10:50:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:50:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:45 Parameters OK 10:50:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:45 Set A/D data flow result=40 10:50:45 Set A/D channel type result=40 10:50:45 Set A/D encoding result=40 10:50:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:45 Set channel filter=0.000000e+000 result=40 10:50:45 Config A/D Result=40 10:50:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:45 Get A/D filter: -9.255963e+061 result=40 10:50:45 Get A/D value=-858993460 result=40 10:50:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:45 Parameters OK 10:50:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:45 Set A/D data flow result=40 10:50:45 Set A/D channel type result=40 10:50:45 Set A/D encoding result=40 10:50:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:45 Set channel filter=0.000000e+000 result=40 10:50:45 Config A/D Result=40 10:50:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:45 Get A/D filter: -9.255963e+061 result=40 10:50:45 Get A/D value=-858993460 result=40 10:50:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:45 Aux= 10:50:45 Message to Camera, serial 85461 queued 10:51:22 Received message from Master: op=PointingHead serial=85474 10:51:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:51:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:51:23 Point started: ret=0 10:51:23 point_skyscan result=0 10:51:23 Check angles 10:51:23 SkyScan query 10:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:51:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:51:24 Message to Master queued w/err=0: serial=85474 error=0 10:51:29 Received message from Master: op=Filter serial=85475 10:51:29 Color wheel filter change from 0 to 0 10:51:29 FLIGetFilterPos err=0 currentPosition=0 10:51:29 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:29 Filter is already there-color wheel unchanged 10:51:29 Received message from Master: op=Shutter serial=85476 10:51:29 Shutter LASER close 10:51:29 Received message from Camera: op=State serial=85478 10:51:29 GetSingleValue result=40 Value=cccccccc 10:51:29 SkyScan query 10:51:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:51:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:30 Parameters OK 10:51:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:30 Set A/D data flow result=40 10:51:30 Set A/D channel type result=40 10:51:30 Set A/D encoding result=40 10:51:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:30 Set channel filter=0.000000e+000 result=40 10:51:30 Config A/D Result=40 10:51:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:30 Get A/D filter: -9.255963e+061 result=40 10:51:30 Get A/D value=-858993460 result=40 10:51:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:30 Parameters OK 10:51:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:30 Set A/D data flow result=40 10:51:30 Set A/D channel type result=40 10:51:30 Set A/D encoding result=40 10:51:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:30 Set channel filter=0.000000e+000 result=40 10:51:30 Config A/D Result=40 10:51:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:30 Get A/D filter: -9.255963e+061 result=40 10:51:30 Get A/D value=-858993460 result=40 10:51:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:30 Aux= 10:51:30 Message to Camera, serial 85478 queued 10:52:06 Received message from Master: op=PointingHead serial=85491 10:52:06 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:52:06 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:52:07 Point started: ret=0 10:52:07 point_skyscan result=0 10:52:08 Check angles 10:52:08 SkyScan query 10:52:08 SkyScan query done: ret=0 az=136.35<-9090 ze=-6.51<-12434 Statuses=0009 0008 10:52:08 Msec=0 True Az=136.35 Ze=-6.51 Az status=0009 Ze status=0008 10:52:08 Check angles 10:52:08 SkyScan query 10:52:09 SkyScan query done: ret=0 az=153.825<-10255 ze=-6.495<-12433 Statuses=0009 0008 10:52:09 Msec=750 True Az=153.825 Ze=-6.495 Az status=0009 Ze status=0008 10:52:09 Check angles 10:52:09 SkyScan query 10:52:10 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.495<-12433 Statuses=0009 0008 10:52:10 Msec=1500 True Az=171.36 Ze=-6.495 Az status=0009 Ze status=0008 10:52:10 Check angles 10:52:10 SkyScan query 10:52:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:52:10 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:52:10 Message to Master queued w/err=0: serial=85491 error=0 10:52:15 Received message from Master: op=Filter serial=85492 10:52:15 Color wheel filter change from 0 to 0 10:52:15 FLIGetFilterPos err=0 currentPosition=0 10:52:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:15 Filter is already there-color wheel unchanged 10:52:16 Received message from Master: op=Shutter serial=85493 10:52:16 Shutter LASER close 10:52:16 Received message from Camera: op=State serial=85495 10:52:16 GetSingleValue result=40 Value=cccccccc 10:52:16 SkyScan query 10:52:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:52:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:16 Parameters OK 10:52:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:16 Set A/D data flow result=40 10:52:16 Set A/D channel type result=40 10:52:16 Set A/D encoding result=40 10:52:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:16 Set channel filter=0.000000e+000 result=40 10:52:16 Config A/D Result=40 10:52:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:16 Get A/D filter: -9.255963e+061 result=40 10:52:16 Get A/D value=-858993460 result=40 10:52:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:16 Parameters OK 10:52:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:16 Set A/D data flow result=40 10:52:16 Set A/D channel type result=40 10:52:16 Set A/D encoding result=40 10:52:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:16 Set channel filter=0.000000e+000 result=40 10:52:16 Config A/D Result=40 10:52:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:16 Get A/D filter: -9.255963e+061 result=40 10:52:16 Get A/D value=-858993460 result=40 10:52:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:16 Aux= 10:52:16 Message to Camera, serial 85495 queued 10:52:53 Received message from Master: op=PointingHead serial=85508 10:52:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:52:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:52:53 Point started: ret=0 10:52:53 point_skyscan result=0 10:52:54 Check angles 10:52:54 SkyScan query 10:52:55 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 10:52:55 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 10:52:55 Check angles 10:52:55 SkyScan query 10:52:55 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 10:52:55 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 10:52:56 Check angles 10:52:56 SkyScan query 10:52:56 SkyScan query done: ret=0 az=117.615<-7841 ze=6.495<-11567 Statuses=0009 0008 10:52:56 Msec=1500 True Az=117.615 Ze=6.495 Az status=0009 Ze status=0008 10:52:56 Check angles 10:52:56 SkyScan query 10:52:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:52:57 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:52:57 Message to Master queued w/err=0: serial=85508 error=0 10:53:02 Received message from Master: op=Filter serial=85509 10:53:02 Color wheel filter change from 0 to 0 10:53:02 FLIGetFilterPos err=0 currentPosition=0 10:53:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:02 Filter is already there-color wheel unchanged 10:53:02 Received message from Master: op=Shutter serial=85510 10:53:02 Shutter LASER close 10:53:02 Received message from Camera: op=State serial=85512 10:53:02 GetSingleValue result=40 Value=cccccccc 10:53:02 SkyScan query 10:53:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:53:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:03 Parameters OK 10:53:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:03 Set A/D data flow result=40 10:53:03 Set A/D channel type result=40 10:53:03 Set A/D encoding result=40 10:53:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:03 Set channel filter=0.000000e+000 result=40 10:53:03 Config A/D Result=40 10:53:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:03 Get A/D filter: -9.255963e+061 result=40 10:53:03 Get A/D value=-858993460 result=40 10:53:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:03 Parameters OK 10:53:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:03 Set A/D data flow result=40 10:53:03 Set A/D channel type result=40 10:53:03 Set A/D encoding result=40 10:53:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:03 Set channel filter=0.000000e+000 result=40 10:53:03 Config A/D Result=40 10:53:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:03 Get A/D filter: -9.255963e+061 result=40 10:53:03 Get A/D value=-858993460 result=40 10:53:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:03 Aux= 10:53:03 Message to Camera, serial 85512 queued 10:53:40 Received message from Master: op=PointingHead serial=85525 10:53:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:53:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:53:40 Point started: ret=0 10:53:40 point_skyscan result=0 10:53:41 Check angles 10:53:41 SkyScan query 10:53:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 10:53:41 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 10:53:41 Check angles 10:53:41 SkyScan query 10:53:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 10:53:42 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 10:53:42 Check angles 10:53:42 SkyScan query 10:53:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 10:53:43 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 10:53:43 Check angles 10:53:43 SkyScan query 10:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.31<-17754 Statuses=0008 0009 10:53:44 Msec=2250 True Az=112.995 Ze=-86.31 Az status=0008 Ze status=0009 10:53:44 Check angles 10:53:44 SkyScan query 10:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.25<-19150 Statuses=0008 0009 10:53:44 Msec=3000 True Az=112.995 Ze=-107.25 Az status=0008 Ze status=0009 10:53:44 Check angles 10:53:44 SkyScan query 10:53:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.61<-20574 Statuses=0008 0009 10:53:45 Msec=3750 True Az=112.995 Ze=-128.61 Az status=0008 Ze status=0009 10:53:45 Check angles 10:53:45 SkyScan query 10:53:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.58<-21972 Statuses=0008 0009 10:53:46 Msec=4500 True Az=112.995 Ze=-149.58 Az status=0008 Ze status=0009 10:53:46 Check angles 10:53:46 SkyScan query 10:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.52<-23368 Statuses=0008 0009 10:53:47 Msec=5250 True Az=112.995 Ze=-170.52 Az status=0008 Ze status=0009 10:53:47 Check angles 10:53:47 SkyScan query 10:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:53:47 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:53:47 Message to Master queued w/err=0: serial=85525 error=0 10:53:52 Received message from Master: op=Filter serial=85526 10:53:52 Color wheel filter change from 0 to 0 10:53:52 FLIGetFilterPos err=0 currentPosition=0 10:53:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:52 Filter is already there-color wheel unchanged 10:53:52 Received message from Master: op=Shutter serial=85527 10:53:52 Shutter LASER open 10:53:53 Received message from Camera: op=State serial=85529 10:53:53 GetSingleValue result=40 Value=cccccccc 10:53:53 SkyScan query 10:53:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:53:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:53 Parameters OK 10:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:53 Set A/D data flow result=40 10:53:53 Set A/D channel type result=40 10:53:53 Set A/D encoding result=40 10:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:53 Set channel filter=0.000000e+000 result=40 10:53:53 Config A/D Result=40 10:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:53 Get A/D filter: -9.255963e+061 result=40 10:53:53 Get A/D value=-858993460 result=40 10:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:53 Parameters OK 10:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:53 Set A/D data flow result=40 10:53:53 Set A/D channel type result=40 10:53:53 Set A/D encoding result=40 10:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:53 Set channel filter=0.000000e+000 result=40 10:53:53 Config A/D Result=40 10:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:53 Get A/D filter: -9.255963e+061 result=40 10:53:53 Get A/D value=-858993460 result=40 10:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:53 Aux= 10:53:53 Message to Camera, serial 85529 queued 10:54:02 Received message from Master: op=Shutter serial=85539 10:54:02 Shutter LASER close 10:54:02 Received message from Master: op=PointingHead serial=85543 10:54:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:54:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:54:02 Point started: ret=0 10:54:02 point_skyscan result=0 10:54:03 Check angles 10:54:03 SkyScan query 10:54:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 10:54:04 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 10:54:04 Check angles 10:54:04 SkyScan query 10:54:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 10:54:05 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 10:54:05 Check angles 10:54:05 SkyScan query 10:54:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 10:54:05 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 10:54:05 Check angles 10:54:05 SkyScan query 10:54:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 10:54:06 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 10:54:06 Check angles 10:54:06 SkyScan query 10:54:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.265<-15951 Statuses=0008 0009 10:54:07 Msec=3000 True Az=112.995 Ze=-59.265 Az status=0008 Ze status=0009 10:54:07 Check angles 10:54:07 SkyScan query 10:54:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 10:54:08 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 10:54:08 Check angles 10:54:08 SkyScan query 10:54:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.34<-13156 Statuses=0008 0009 10:54:08 Msec=4500 True Az=112.995 Ze=-17.34 Az status=0008 Ze status=0009 10:54:08 Check angles 10:54:08 SkyScan query 10:54:09 SkyScan query done: ret=0 az=112.995<-7533 ze=3.615<-11759 Statuses=0008 0009 10:54:09 Msec=5250 True Az=112.995 Ze=3.615 Az status=0008 Ze status=0009 10:54:09 Check angles 10:54:09 SkyScan query 10:54:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:54:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:54:10 Message to Master queued w/err=0: serial=85543 error=0 10:54:15 Received message from Master: op=Filter serial=85544 10:54:15 Color wheel filter change from 0 to 0 10:54:15 FLIGetFilterPos err=0 currentPosition=0 10:54:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:15 Filter is already there-color wheel unchanged 10:54:15 Received message from Master: op=Shutter serial=85545 10:54:15 Shutter LASER close 10:54:15 Received message from Camera: op=State serial=85547 10:54:15 GetSingleValue result=40 Value=cccccccc 10:54:15 SkyScan query 10:54:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:16 Parameters OK 10:54:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:16 Set A/D data flow result=40 10:54:16 Set A/D channel type result=40 10:54:16 Set A/D encoding result=40 10:54:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:16 Set channel filter=0.000000e+000 result=40 10:54:16 Config A/D Result=40 10:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:16 Get A/D filter: -9.255963e+061 result=40 10:54:16 Get A/D value=-858993460 result=40 10:54:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:16 Parameters OK 10:54:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:16 Set A/D data flow result=40 10:54:16 Set A/D channel type result=40 [UTC 2019-3-3 10:54:16] 10:54:16 Set A/D encoding result=40 10:54:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:16 Set channel filter=0.000000e+000 result=40 10:54:16 Config A/D Result=40 10:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:16 Get A/D filter: -9.255963e+061 result=40 10:54:16 Get A/D value=-858993460 result=40 10:54:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:16 Aux= 10:54:16 Message to Camera, serial 85547 queued 10:54:53 Received message from Master: op=PointingHead serial=85560 10:54:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:54:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:54:53 Point started: ret=0 10:54:53 point_skyscan result=0 10:54:54 Check angles 10:54:54 SkyScan query 10:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:54:54 Message to Master queued w/err=0: serial=85560 error=0 10:54:59 Received message from Master: op=Filter serial=85561 10:54:59 Color wheel filter change from 0 to 0 10:54:59 FLIGetFilterPos err=0 currentPosition=0 10:54:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:59 Filter is already there-color wheel unchanged 10:54:59 Received message from Master: op=Shutter serial=85562 10:54:59 Shutter LASER close 10:54:59 Received message from Camera: op=State serial=85564 10:54:59 GetSingleValue result=40 Value=cccccccc 10:54:59 SkyScan query 10:55:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:55:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:00 Parameters OK 10:55:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:00 Set A/D data flow result=40 10:55:00 Set A/D channel type result=40 10:55:00 Set A/D encoding result=40 10:55:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:00 Set channel filter=0.000000e+000 result=40 10:55:00 Config A/D Result=40 10:55:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:00 Get A/D filter: -9.255963e+061 result=40 10:55:00 Get A/D value=-858993460 result=40 10:55:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:00 Parameters OK 10:55:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:00 Set A/D data flow result=40 10:55:00 Set A/D channel type result=40 10:55:00 Set A/D encoding result=40 10:55:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:00 Set channel filter=0.000000e+000 result=40 10:55:00 Config A/D Result=40 10:55:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:00 Get A/D filter: -9.255963e+061 result=40 10:55:00 Get A/D value=-858993460 result=40 10:55:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:00 Aux= 10:55:00 Message to Camera, serial 85564 queued 10:55:37 Received message from Master: op=PointingHead serial=85577 10:55:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:55:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:55:37 Point started: ret=0 10:55:37 point_skyscan result=0 10:55:38 Check angles 10:55:38 SkyScan query 10:55:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:55:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:55:39 Message to Master queued w/err=0: serial=85577 error=0 10:55:44 Received message from Master: op=Filter serial=85578 10:55:44 Color wheel filter change from 0 to 0 10:55:44 FLIGetFilterPos err=0 currentPosition=0 10:55:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:44 Filter is already there-color wheel unchanged 10:55:44 Received message from Master: op=Shutter serial=85579 10:55:44 Shutter LASER close 10:55:44 Received message from Camera: op=State serial=85581 10:55:44 GetSingleValue result=40 Value=cccccccc 10:55:44 SkyScan query 10:55:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:55:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:44 Parameters OK 10:55:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:44 Set A/D data flow result=40 10:55:44 Set A/D channel type result=40 10:55:44 Set A/D encoding result=40 10:55:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:44 Set channel filter=0.000000e+000 result=40 10:55:44 Config A/D Result=40 10:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:44 Get A/D filter: -9.255963e+061 result=40 10:55:44 Get A/D value=-858993460 result=40 10:55:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:44 Parameters OK 10:55:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:44 Set A/D data flow result=40 10:55:44 Set A/D channel type result=40 10:55:44 Set A/D encoding result=40 10:55:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:44 Set channel filter=0.000000e+000 result=40 10:55:44 Config A/D Result=40 10:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:44 Get A/D filter: -9.255963e+061 result=40 10:55:44 Get A/D value=-858993460 result=40 10:55:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:44 Aux= 10:55:44 Message to Camera, serial 85581 queued 10:56:21 Received message from Master: op=PointingHead serial=85594 10:56:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:56:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:56:22 Point started: ret=0 10:56:22 point_skyscan result=0 10:56:22 Check angles 10:56:22 SkyScan query 10:56:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:56:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:56:23 Message to Master queued w/err=0: serial=85594 error=0 10:56:28 Received message from Master: op=Filter serial=85595 10:56:28 Color wheel filter change from 0 to 0 10:56:28 FLIGetFilterPos err=0 currentPosition=0 10:56:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:28 Filter is already there-color wheel unchanged 10:56:28 Received message from Master: op=Shutter serial=85596 10:56:28 Shutter LASER close 10:56:28 Received message from Camera: op=State serial=85598 10:56:28 GetSingleValue result=40 Value=cccccccc 10:56:28 SkyScan query 10:56:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:56:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:29 Parameters OK 10:56:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:29 Set A/D data flow result=40 10:56:29 Set A/D channel type result=40 10:56:29 Set A/D encoding result=40 10:56:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:29 Set channel filter=0.000000e+000 result=40 10:56:29 Config A/D Result=40 10:56:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:29 Get A/D filter: -9.255963e+061 result=40 10:56:29 Get A/D value=-858993460 result=40 10:56:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:29 Parameters OK 10:56:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:29 Set A/D data flow result=40 10:56:29 Set A/D channel type result=40 10:56:29 Set A/D encoding result=40 10:56:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:29 Set channel filter=0.000000e+000 result=40 10:56:29 Config A/D Result=40 10:56:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:29 Get A/D filter: -9.255963e+061 result=40 10:56:29 Get A/D value=-858993460 result=40 10:56:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:29 Aux= 10:56:29 Message to Camera, serial 85598 queued 10:57:06 Received message from Master: op=PointingHead serial=85611 10:57:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:57:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:57:06 Point started: ret=0 10:57:06 point_skyscan result=0 10:57:07 Check angles 10:57:07 SkyScan query 10:57:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 10:57:07 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 10:57:07 Check angles 10:57:07 SkyScan query 10:57:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 10:57:08 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 10:57:08 Check angles 10:57:08 SkyScan query 10:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.085<-16339 Statuses=0008 0009 10:57:09 Msec=1500 True Az=112.995 Ze=-65.085 Az status=0008 Ze status=0009 10:57:09 Check angles 10:57:09 SkyScan query 10:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 10:57:09 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 10:57:10 Check angles 10:57:10 SkyScan query 10:57:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.43<-19162 Statuses=0008 0009 10:57:10 Msec=3000 True Az=112.995 Ze=-107.43 Az status=0008 Ze status=0009 10:57:10 Check angles 10:57:10 SkyScan query 10:57:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 10:57:11 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 10:57:11 Check angles 10:57:11 SkyScan query 10:57:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.745<-21983 Statuses=0008 0009 10:57:12 Msec=4500 True Az=112.995 Ze=-149.745 Az status=0008 Ze status=0009 10:57:12 Check angles 10:57:12 SkyScan query 10:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 10:57:13 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 10:57:13 Check angles 10:57:13 SkyScan query 10:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:57:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:57:13 Message to Master queued w/err=0: serial=85611 error=0 10:57:18 Received message from Master: op=Filter serial=85612 10:57:18 Color wheel filter change from 0 to 0 10:57:18 FLIGetFilterPos err=0 currentPosition=0 10:57:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:18 Filter is already there-color wheel unchanged 10:57:18 Received message from Master: op=Shutter serial=85613 10:57:18 Shutter LASER open 10:57:19 Received message from Camera: op=State serial=85615 10:57:19 GetSingleValue result=40 Value=cccccccc 10:57:19 SkyScan query 10:57:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:57:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:19 Parameters OK 10:57:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:19 Set A/D data flow result=40 10:57:19 Set A/D channel type result=40 10:57:19 Set A/D encoding result=40 10:57:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:19 Set channel filter=0.000000e+000 result=40 10:57:19 Config A/D Result=40 10:57:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:19 Get A/D filter: -9.255963e+061 result=40 10:57:19 Get A/D value=-858993460 result=40 10:57:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:19 Parameters OK 10:57:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:19 Set A/D data flow result=40 10:57:19 Set A/D channel type result=40 10:57:19 Set A/D encoding result=40 10:57:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:19 Set channel filter=0.000000e+000 result=40 10:57:19 Config A/D Result=40 10:57:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:19 Get A/D filter: -9.255963e+061 result=40 10:57:19 Get A/D value=-858993460 result=40 10:57:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:19 Aux= 10:57:19 Message to Camera, serial 85615 queued 10:57:28 Received message from Master: op=Shutter serial=85625 10:57:28 Shutter LASER close 10:57:28 Received message from Master: op=PointingHead serial=85629 10:57:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:57:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:57:29 Point started: ret=0 10:57:29 point_skyscan result=0 10:57:29 Check angles 10:57:29 SkyScan query 10:57:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 10:57:30 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 10:57:30 Check angles 10:57:30 SkyScan query 10:57:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.425<-20095 Statuses=0008 0009 10:57:31 Msec=750 True Az=112.995 Ze=-121.425 Az status=0008 Ze status=0009 10:57:31 Check angles 10:57:31 SkyScan query 10:57:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 10:57:31 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 10:57:32 Check angles 10:57:32 SkyScan query 10:57:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.5<-17300 Statuses=0008 0009 10:57:32 Msec=2250 True Az=112.995 Ze=-79.5 Az status=0008 Ze status=0009 10:57:32 Check angles 10:57:32 SkyScan query 10:57:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.08<-15872 Statuses=0008 0009 10:57:33 Msec=3000 True Az=112.995 Ze=-58.08 Az status=0008 Ze status=0009 10:57:33 Check angles 10:57:33 SkyScan query 10:57:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.155<-14477 Statuses=0008 0009 10:57:34 Msec=3750 True Az=112.995 Ze=-37.155 Az status=0008 Ze status=0009 10:57:34 Check angles 10:57:34 SkyScan query 10:57:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.2<-13080 Statuses=0008 0009 10:57:34 Msec=4500 True Az=112.995 Ze=-16.2 Az status=0008 Ze status=0009 10:57:35 Check angles 10:57:35 SkyScan query 10:57:35 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 10:57:35 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 10:57:35 Check angles 10:57:35 SkyScan query 10:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:57:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:57:36 Message to Master queued w/err=0: serial=85629 error=0 10:57:41 Received message from Master: op=Filter serial=85630 10:57:41 Color wheel filter change from 0 to 0 10:57:41 FLIGetFilterPos err=0 currentPosition=0 10:57:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:41 Filter is already there-color wheel unchanged 10:57:41 Received message from Master: op=Shutter serial=85631 10:57:41 Shutter LASER close 10:57:41 Received message from Camera: op=State serial=85633 10:57:41 GetSingleValue result=40 Value=cccccccc 10:57:41 SkyScan query 10:57:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:57:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:42 Parameters OK 10:57:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:42 Set A/D data flow result=40 10:57:42 Set A/D channel type result=40 10:57:42 Set A/D encoding result=40 10:57:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:42 Set channel filter=0.000000e+000 result=40 10:57:42 Config A/D Result=40 10:57:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:42 Get A/D filter: -9.255963e+061 result=40 10:57:42 Get A/D value=-858993460 result=40 10:57:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:42 Parameters OK 10:57:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:42 Set A/D data flow result=40 10:57:42 Set A/D channel type result=40 10:57:42 Set A/D encoding result=40 10:57:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:42 Set channel filter=0.000000e+000 result=40 10:57:42 Config A/D Result=40 10:57:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:42 Get A/D filter: -9.255963e+061 result=40 10:57:42 Get A/D value=-858993460 result=40 10:57:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:42 Aux= 10:57:42 Message to Camera, serial 85633 queued 10:58:19 Received message from Master: op=PointingHead serial=85646 10:58:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:58:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:58:19 Point started: ret=0 10:58:19 point_skyscan result=0 10:58:20 Check angles 10:58:20 SkyScan query 10:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:58:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:58:20 Message to Master queued w/err=0: serial=85646 error=0 10:58:25 Received message from Master: op=Filter serial=85647 10:58:25 Color wheel filter change from 0 to 0 10:58:25 FLIGetFilterPos err=0 currentPosition=0 10:58:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:25 Filter is already there-color wheel unchanged 10:58:26 Received message from Master: op=Shutter serial=85648 10:58:26 Shutter LASER close 10:58:26 Received message from Camera: op=State serial=85650 10:58:26 GetSingleValue result=40 Value=cccccccc 10:58:26 SkyScan query 10:58:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:58:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:26 Parameters OK 10:58:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:26 Set A/D data flow result=40 10:58:26 Set A/D channel type result=40 10:58:26 Set A/D encoding result=40 10:58:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:26 Set channel filter=0.000000e+000 result=40 10:58:26 Config A/D Result=40 10:58:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:26 Get A/D filter: -9.255963e+061 result=40 10:58:26 Get A/D value=-858993460 result=40 10:58:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:26 Parameters OK 10:58:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:26 Set A/D data flow result=40 10:58:26 Set A/D channel type result=40 10:58:26 Set A/D encoding result=40 10:58:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:26 Set channel filter=0.000000e+000 result=40 10:58:26 Config A/D Result=40 10:58:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:26 Get A/D filter: -9.255963e+061 result=40 10:58:26 Get A/D value=-858993460 result=40 10:58:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:26 Aux= 10:58:26 Message to Camera, serial 85650 queued 10:59:03 Received message from Master: op=PointingHead serial=85663 10:59:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:59:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:59:03 Point started: ret=0 10:59:03 point_skyscan result=0 10:59:04 Check angles 10:59:04 SkyScan query 10:59:05 SkyScan query done: ret=0 az=135.72<-9048 ze=-6.51<-12434 Statuses=0009 0008 10:59:05 Msec=0 True Az=135.72 Ze=-6.51 Az status=0009 Ze status=0008 10:59:05 Check angles 10:59:05 SkyScan query 10:59:05 SkyScan query done: ret=0 az=153.18<-10212 ze=-6.495<-12433 Statuses=0009 0008 10:59:05 Msec=750 True Az=153.18 Ze=-6.495 Az status=0009 Ze status=0008 10:59:06 Check angles 10:59:06 SkyScan query 10:59:06 SkyScan query done: ret=0 az=170.685<-11379 ze=-6.495<-12433 Statuses=0009 0008 10:59:06 Msec=1500 True Az=170.685 Ze=-6.495 Az status=0009 Ze status=0008 10:59:06 Check angles 10:59:06 SkyScan query 10:59:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:59:07 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:59:07 Message to Master queued w/err=0: serial=85663 error=0 10:59:12 Received message from Master: op=Filter serial=85664 10:59:12 Color wheel filter change from 0 to 0 10:59:12 FLIGetFilterPos err=0 currentPosition=0 10:59:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:12 Filter is already there-color wheel unchanged 10:59:12 Received message from Master: op=Shutter serial=85665 10:59:12 Shutter LASER close 10:59:12 Received message from Camera: op=State serial=85667 10:59:12 GetSingleValue result=40 Value=cccccccc 10:59:12 SkyScan query 10:59:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:59:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:13 Parameters OK 10:59:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:13 Set A/D data flow result=40 10:59:13 Set A/D channel type result=40 10:59:13 Set A/D encoding result=40 10:59:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:13 Set channel filter=0.000000e+000 result=40 10:59:13 Config A/D Result=40 10:59:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:13 Get A/D filter: -9.255963e+061 result=40 10:59:13 Get A/D value=-858993460 result=40 10:59:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:13 Parameters OK 10:59:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:13 Set A/D data flow result=40 10:59:13 Set A/D channel type result=40 10:59:13 Set A/D encoding result=40 10:59:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:13 Set channel filter=0.000000e+000 result=40 10:59:13 Config A/D Result=40 10:59:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:13 Get A/D filter: -9.255963e+061 result=40 10:59:13 Get A/D value=-858993460 result=40 10:59:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:13 Aux= 10:59:13 Message to Camera, serial 85667 queued 10:59:50 Received message from Master: op=PointingHead serial=85680 10:59:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:59:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:59:50 Point started: ret=0 10:59:50 point_skyscan result=0 10:59:51 Check angles 10:59:51 SkyScan query 10:59:51 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 10:59:51 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 10:59:51 Check angles 10:59:51 SkyScan query 10:59:52 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 10:59:52 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 10:59:52 Check angles 10:59:52 SkyScan query 10:59:53 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 10:59:53 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 10:59:53 Check angles 10:59:53 SkyScan query 10:59:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:59:53 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:59:53 Message to Master queued w/err=0: serial=85680 error=0 10:59:58 Received message from Master: op=Filter serial=85681 10:59:58 Color wheel filter change from 0 to 0 10:59:58 FLIGetFilterPos err=0 currentPosition=0 10:59:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:58 Filter is already there-color wheel unchanged 10:59:59 Received message from Master: op=Shutter serial=85682 10:59:59 Shutter LASER close 10:59:59 Received message from Camera: op=State serial=85684 10:59:59 GetSingleValue result=40 Value=cccccccc 10:59:59 SkyScan query 10:59:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:59:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:59 Parameters OK 10:59:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:59 Set A/D data flow result=40 10:59:59 Set A/D channel type result=40 10:59:59 Set A/D encoding result=40 10:59:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:59 Set channel filter=0.000000e+000 result=40 10:59:59 Config A/D Result=40 10:59:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:59 Get A/D filter: -9.255963e+061 result=40 10:59:59 Get A/D value=-858993460 result=40 10:59:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:59 Parameters OK 10:59:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:59 Set A/D data flow result=40 10:59:59 Set A/D channel type result=40 10:59:59 Set A/D encoding result=40 10:59:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:59 Set channel filter=0.000000e+000 result=40 10:59:59 Config A/D Result=40 10:59:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:59 Get A/D filter: -9.255963e+061 result=40 10:59:59 Get A/D value=-858993460 result=40 10:59:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:59 Aux= 10:59:59 Message to Camera, serial 85684 queued 11:00:35 Received message from Master: op=PointingHead serial=85696 11:00:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:00:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:00:36 Point started: ret=0 11:00:36 point_skyscan result=0 11:00:36 Check angles 11:00:36 SkyScan query 11:00:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 11:00:37 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 11:00:37 Check angles 11:00:37 SkyScan query 11:00:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 11:00:38 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 11:00:38 Check angles 11:00:38 SkyScan query 11:00:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 11:00:38 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 11:00:39 Check angles 11:00:39 SkyScan query 11:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 11:00:39 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 11:00:39 Check angles 11:00:39 SkyScan query 11:00:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.895<-19193 Statuses=0008 0009 11:00:40 Msec=3000 True Az=112.995 Ze=-107.895 Az status=0008 Ze status=0009 11:00:40 Check angles 11:00:40 SkyScan query 11:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.285<-20619 Statuses=0008 0009 11:00:41 Msec=3750 True Az=112.995 Ze=-129.285 Az status=0008 Ze status=0009 11:00:41 Check angles 11:00:41 SkyScan query 11:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.24<-22016 Statuses=0008 0009 11:00:41 Msec=4500 True Az=112.995 Ze=-150.24 Az status=0008 Ze status=0009 11:00:42 Check angles 11:00:42 SkyScan query 11:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0008 0009 11:00:42 Msec=5250 True Az=112.995 Ze=-171.045 Az status=0008 Ze status=0009 11:00:42 Check angles 11:00:42 SkyScan query 11:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:00:43 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:00:43 Message to Master queued w/err=0: serial=85696 error=0 11:00:48 Received message from Master: op=Filter serial=85697 11:00:48 Color wheel filter change from 0 to 0 11:00:48 FLIGetFilterPos err=0 currentPosition=0 11:00:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:48 Filter is already there-color wheel unchanged 11:00:48 Received message from Master: op=Shutter serial=85698 11:00:48 Shutter LASER open 11:00:48 Received message from Camera: op=State serial=85700 11:00:48 GetSingleValue result=40 Value=cccccccc 11:00:48 SkyScan query 11:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:00:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:49 Parameters OK 11:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:49 Set A/D data flow result=40 11:00:49 Set A/D channel type result=40 11:00:49 Set A/D encoding result=40 11:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:49 Set channel filter=0.000000e+000 result=40 11:00:49 Config A/D Result=40 11:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:49 Get A/D filter: -9.255963e+061 result=40 11:00:49 Get A/D value=-858993460 result=40 11:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:49 Parameters OK 11:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:49 Set A/D data flow result=40 11:00:49 Set A/D channel type result=40 11:00:49 Set A/D encoding result=40 11:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:49 Set channel filter=0.000000e+000 result=40 11:00:49 Config A/D Result=40 11:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:49 Get A/D filter: -9.255963e+061 result=40 11:00:49 Get A/D value=-858993460 result=40 11:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:49 Aux= 11:00:49 Message to Camera, serial 85700 queued 11:00:57 Received message from Master: op=Shutter serial=85710 11:00:57 Shutter LASER close 11:00:58 Received message from Master: op=PointingHead serial=85714 11:00:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:00:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:00:58 Point started: ret=0 11:00:58 point_skyscan result=0 11:00:59 Check angles 11:00:59 SkyScan query 11:00:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 11:00:59 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 11:01:00 Check angles 11:01:00 SkyScan query 11:01:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.905<-20127 Statuses=0008 0009 11:01:00 Msec=750 True Az=112.995 Ze=-121.905 Az status=0008 Ze status=0009 11:01:00 Check angles 11:01:00 SkyScan query 11:01:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 11:01:01 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 11:01:01 Check angles 11:01:01 SkyScan query 11:01:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.025<-17335 Statuses=0008 0009 11:01:02 Msec=2250 True Az=112.995 Ze=-80.025 Az status=0008 Ze status=0009 11:01:02 Check angles 11:01:02 SkyScan query 11:01:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.635<-15909 Statuses=0008 0009 11:01:02 Msec=3000 True Az=112.995 Ze=-58.635 Az status=0008 Ze status=0009 11:01:03 Check angles 11:01:03 SkyScan query 11:01:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.245<-14483 Statuses=0008 0009 11:01:03 Msec=3750 True Az=112.995 Ze=-37.245 Az status=0008 Ze status=0009 11:01:03 Check angles 11:01:03 SkyScan query 11:01:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.275<-13085 Statuses=0008 0009 11:01:04 Msec=4500 True Az=112.995 Ze=-16.275 Az status=0008 Ze status=0009 11:01:04 Check angles 11:01:04 SkyScan query 11:01:05 SkyScan query done: ret=0 az=112.995<-7533 ze=4.545<-11697 Statuses=0008 0009 11:01:05 Msec=5250 True Az=112.995 Ze=4.545 Az status=0008 Ze status=0009 11:01:05 Check angles 11:01:05 SkyScan query 11:01:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:01:05 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:01:05 Message to Master queued w/err=0: serial=85714 error=0 11:01:10 Received message from Master: op=Filter serial=85715 11:01:10 Color wheel filter change from 0 to 0 11:01:10 FLIGetFilterPos err=0 currentPosition=0 11:01:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:10 Filter is already there-color wheel unchanged 11:01:11 Received message from Master: op=Shutter serial=85716 11:01:11 Shutter LASER close 11:01:11 Received message from Camera: op=State serial=85718 11:01:11 GetSingleValue result=40 Value=cccccccc 11:01:11 SkyScan query 11:01:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:01:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:11 Parameters OK 11:01:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:11 Set A/D data flow result=40 11:01:11 Set A/D channel type result=40 11:01:11 Set A/D encoding result=40 11:01:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:11 Set channel filter=0.000000e+000 result=40 11:01:11 Config A/D Result=40 11:01:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:11 Get A/D filter: -9.255963e+061 result=40 11:01:11 Get A/D value=-858993460 result=40 11:01:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:11 Parameters OK 11:01:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:11 Set A/D data flow result=40 11:01:11 Set A/D channel type result=40 11:01:11 Set A/D encoding result=40 11:01:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:11 Set channel filter=0.000000e+000 result=40 11:01:11 Config A/D Result=40 11:01:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:11 Get A/D filter: -9.255963e+061 result=40 11:01:11 Get A/D value=-858993460 result=40 11:01:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:11 Aux= 11:01:11 Message to Camera, serial 85718 queued 11:01:48 Received message from Master: op=PointingHead serial=85731 11:01:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:01:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:01:48 Point started: ret=0 11:01:48 point_skyscan result=0 11:01:49 Check angles 11:01:49 SkyScan query 11:01:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:01:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:01:50 Message to Master queued w/err=0: serial=85731 error=0 11:01:55 Received message from Master: op=Filter serial=85732 11:01:55 Color wheel filter change from 0 to 0 11:01:55 FLIGetFilterPos err=0 currentPosition=0 11:01:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:55 Filter is already there-color wheel unchanged 11:01:55 Received message from Master: op=Shutter serial=85733 11:01:55 Shutter LASER close 11:01:55 Received message from Camera: op=State serial=85735 11:01:55 GetSingleValue result=40 Value=cccccccc 11:01:55 SkyScan query 11:01:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:01:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:56 Parameters OK 11:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:56 Set A/D data flow result=40 11:01:56 Set A/D channel type result=40 11:01:56 Set A/D encoding result=40 11:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:56 Set channel filter=0.000000e+000 result=40 11:01:56 Config A/D Result=40 11:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:56 Get A/D filter: -9.255963e+061 result=40 11:01:56 Get A/D value=-858993460 result=40 11:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:56 Parameters OK 11:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:56 Set A/D data flow result=40 11:01:56 Set A/D channel type result=40 11:01:56 Set A/D encoding result=40 11:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:56 Set channel filter=0.000000e+000 result=40 11:01:56 Config A/D Result=40 11:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:56 Get A/D filter: -9.255963e+061 result=40 11:01:56 Get A/D value=-858993460 result=40 11:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:56 Aux= 11:01:56 Message to Camera, serial 85735 queued 11:02:32 Received message from Master: op=PointingHead serial=85748 11:02:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:02:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:02:33 Point started: ret=0 11:02:33 point_skyscan result=0 11:02:34 Check angles 11:02:34 SkyScan query 11:02:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:02:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:02:34 Message to Master queued w/err=0: serial=85748 error=0 11:02:39 Received message from Master: op=Filter serial=85749 11:02:39 Color wheel filter change from 0 to 0 11:02:39 FLIGetFilterPos err=0 currentPosition=0 11:02:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:39 Filter is already there-color wheel unchanged 11:02:39 Received message from Master: op=Shutter serial=85750 11:02:39 Shutter LASER close 11:02:39 Received message from Camera: op=State serial=85752 11:02:39 GetSingleValue result=40 Value=cccccccc 11:02:39 SkyScan query 11:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:02:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:40 Parameters OK 11:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:40 Set A/D data flow result=40 11:02:40 Set A/D channel type result=40 11:02:40 Set A/D encoding result=40 11:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:40 Set channel filter=0.000000e+000 result=40 11:02:40 Config A/D Result=40 11:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:40 Get A/D filter: -9.255963e+061 result=40 11:02:40 Get A/D value=-858993460 result=40 11:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:40 Parameters OK 11:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:40 Set A/D data flow result=40 11:02:40 Set A/D channel type result=40 11:02:40 Set A/D encoding result=40 11:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:40 Set channel filter=0.000000e+000 result=40 11:02:40 Config A/D Result=40 11:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:40 Get A/D filter: -9.255963e+061 result=40 11:02:40 Get A/D value=-858993460 result=40 11:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:40 Aux= 11:02:40 Message to Camera, serial 85752 queued 11:03:17 Received message from Master: op=PointingHead serial=85765 11:03:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:03:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:03:17 Point started: ret=0 11:03:17 point_skyscan result=0 11:03:18 Check angles 11:03:18 SkyScan query 11:03:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:03:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:03:18 Message to Master queued w/err=0: serial=85765 error=0 11:03:23 Received message from Master: op=Filter serial=85766 11:03:23 Color wheel filter change from 0 to 0 11:03:23 FLIGetFilterPos err=0 currentPosition=0 11:03:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:23 Filter is already there-color wheel unchanged 11:03:24 Received message from Master: op=Shutter serial=85767 11:03:24 Shutter LASER close 11:03:24 Received message from Camera: op=State serial=85769 11:03:24 GetSingleValue result=40 Value=cccccccc 11:03:24 SkyScan query 11:03:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:03:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:24 Parameters OK 11:03:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:24 Set A/D data flow result=40 11:03:24 Set A/D channel type result=40 11:03:24 Set A/D encoding result=40 11:03:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:24 Set channel filter=0.000000e+000 result=40 11:03:24 Config A/D Result=40 11:03:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:24 Get A/D filter: -9.255963e+061 result=40 11:03:24 Get A/D value=-858993460 result=40 11:03:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:24 Parameters OK 11:03:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:24 Set A/D data flow result=40 11:03:24 Set A/D channel type result=40 11:03:24 Set A/D encoding result=40 11:03:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:24 Set channel filter=0.000000e+000 result=40 11:03:24 Config A/D Result=40 11:03:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:24 Get A/D filter: -9.255963e+061 result=40 11:03:24 Get A/D value=-858993460 result=40 11:03:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:24 Aux= 11:03:24 Message to Camera, serial 85769 queued 11:03:38 Received message from Master: op=Identify serial=85770 [UTC 2019-3-3 11:03:50] 11:04:01 Received message from Master: op=PointingHead serial=85785 11:04:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:04:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:04:01 Point started: ret=0 11:04:01 point_skyscan result=0 11:04:02 Check angles 11:04:02 SkyScan query 11:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 11:04:03 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 11:04:03 Check angles 11:04:03 SkyScan query 11:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 11:04:03 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 11:04:04 Check angles 11:04:04 SkyScan query 11:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.025<-16335 Statuses=0008 0009 11:04:04 Msec=1500 True Az=112.995 Ze=-65.025 Az status=0008 Ze status=0009 11:04:04 Check angles 11:04:04 SkyScan query 11:04:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.415<-17761 Statuses=0008 0009 11:04:05 Msec=2250 True Az=112.995 Ze=-86.415 Az status=0008 Ze status=0009 11:04:05 Check angles 11:04:05 SkyScan query 11:04:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 11:04:06 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 11:04:06 Check angles 11:04:06 SkyScan query 11:04:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.73<-20582 Statuses=0008 0009 11:04:06 Msec=3750 True Az=112.995 Ze=-128.73 Az status=0008 Ze status=0009 11:04:07 Check angles 11:04:07 SkyScan query 11:04:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.7<-21980 Statuses=0008 0009 11:04:07 Msec=4500 True Az=112.995 Ze=-149.7 Az status=0008 Ze status=0009 11:04:07 Check angles 11:04:07 SkyScan query 11:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.625<-23375 Statuses=0008 0009 11:04:08 Msec=5250 True Az=112.995 Ze=-170.625 Az status=0008 Ze status=0009 11:04:08 Check angles 11:04:08 SkyScan query 11:04:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:04:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:04:09 Message to Master queued w/err=0: serial=85785 error=0 11:04:14 Received message from Master: op=Filter serial=85786 11:04:14 Color wheel filter change from 0 to 0 11:04:14 FLIGetFilterPos err=0 currentPosition=0 11:04:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:14 Filter is already there-color wheel unchanged 11:04:14 Received message from Master: op=Shutter serial=85787 11:04:14 Shutter LASER open 11:04:14 Received message from Camera: op=State serial=85789 11:04:14 GetSingleValue result=40 Value=cccccccc 11:04:14 SkyScan query 11:04:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:04:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:15 Parameters OK 11:04:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:15 Set A/D data flow result=40 11:04:15 Set A/D channel type result=40 11:04:15 Set A/D encoding result=40 11:04:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:15 Set channel filter=0.000000e+000 result=40 11:04:15 Config A/D Result=40 11:04:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:15 Get A/D filter: -9.255963e+061 result=40 11:04:15 Get A/D value=-858993460 result=40 11:04:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:15 Parameters OK 11:04:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:15 Set A/D data flow result=40 11:04:15 Set A/D channel type result=40 11:04:15 Set A/D encoding result=40 11:04:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:15 Set channel filter=0.000000e+000 result=40 11:04:15 Config A/D Result=40 11:04:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:15 Get A/D filter: -9.255963e+061 result=40 11:04:15 Get A/D value=-858993460 result=40 11:04:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:15 Aux= 11:04:15 Message to Camera, serial 85789 queued 11:04:23 Received message from Master: op=Shutter serial=85799 11:04:23 Shutter LASER close 11:04:24 Received message from Master: op=PointingHead serial=85803 11:04:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:04:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:04:24 Point started: ret=0 11:04:24 point_skyscan result=0 11:04:25 Check angles 11:04:25 SkyScan query 11:04:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 11:04:25 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 11:04:26 Check angles 11:04:26 SkyScan query 11:04:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 11:04:26 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 11:04:26 Check angles 11:04:26 SkyScan query 11:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.235<-18749 Statuses=0008 0009 11:04:27 Msec=1500 True Az=112.995 Ze=-101.235 Az status=0008 Ze status=0009 11:04:27 Check angles 11:04:27 SkyScan query 11:04:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.28<-17352 Statuses=0008 0009 11:04:28 Msec=2250 True Az=112.995 Ze=-80.28 Az status=0008 Ze status=0009 11:04:28 Check angles 11:04:28 SkyScan query 11:04:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.34<-15956 Statuses=0008 0009 11:04:28 Msec=3000 True Az=112.995 Ze=-59.34 Az status=0008 Ze status=0009 11:04:29 Check angles 11:04:29 SkyScan query 11:04:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.355<-14557 Statuses=0008 0009 11:04:29 Msec=3750 True Az=112.995 Ze=-38.355 Az status=0008 Ze status=0009 11:04:29 Check angles 11:04:29 SkyScan query 11:04:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.415<-13161 Statuses=0008 0009 11:04:30 Msec=4500 True Az=112.995 Ze=-17.415 Az status=0008 Ze status=0009 11:04:30 Check angles 11:04:30 SkyScan query 11:04:31 SkyScan query done: ret=0 az=112.995<-7533 ze=3.975<-11735 Statuses=0008 0009 11:04:31 Msec=5250 True Az=112.995 Ze=3.975 Az status=0008 Ze status=0009 11:04:31 Check angles 11:04:31 SkyScan query 11:04:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:04:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:04:31 Message to Master queued w/err=0: serial=85803 error=0 11:04:36 Received message from Master: op=Filter serial=85804 11:04:36 Color wheel filter change from 0 to 0 11:04:36 FLIGetFilterPos err=0 currentPosition=0 11:04:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:37 Filter is already there-color wheel unchanged 11:04:37 Received message from Master: op=Shutter serial=85805 11:04:37 Shutter LASER close 11:04:37 Received message from Camera: op=State serial=85807 11:04:37 GetSingleValue result=40 Value=cccccccc 11:04:37 SkyScan query 11:04:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:04:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:37 Parameters OK 11:04:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:37 Set A/D data flow result=40 11:04:37 Set A/D channel type result=40 11:04:37 Set A/D encoding result=40 11:04:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:37 Set channel filter=0.000000e+000 result=40 11:04:37 Config A/D Result=40 11:04:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:37 Get A/D filter: -9.255963e+061 result=40 11:04:37 Get A/D value=-858993460 result=40 11:04:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:37 Parameters OK 11:04:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:37 Set A/D data flow result=40 11:04:37 Set A/D channel type result=40 11:04:37 Set A/D encoding result=40 11:04:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:37 Set channel filter=0.000000e+000 result=40 11:04:37 Config A/D Result=40 11:04:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:37 Get A/D filter: -9.255963e+061 result=40 11:04:37 Get A/D value=-858993460 result=40 11:04:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:37 Aux= 11:04:37 Message to Camera, serial 85807 queued 11:05:14 Received message from Master: op=PointingHead serial=85820 11:05:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:05:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:05:15 Point started: ret=0 11:05:15 point_skyscan result=0 11:05:15 Check angles 11:05:15 SkyScan query 11:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:05:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:05:16 Message to Master queued w/err=0: serial=85820 error=0 11:05:21 Received message from Master: op=Filter serial=85821 11:05:21 Color wheel filter change from 0 to 0 11:05:21 FLIGetFilterPos err=0 currentPosition=0 11:05:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:21 Filter is already there-color wheel unchanged 11:05:21 Received message from Master: op=Shutter serial=85822 11:05:21 Shutter LASER close 11:05:21 Received message from Camera: op=State serial=85824 11:05:21 GetSingleValue result=40 Value=cccccccc 11:05:21 SkyScan query 11:05:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:05:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:22 Parameters OK 11:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:22 Set A/D data flow result=40 11:05:22 Set A/D channel type result=40 11:05:22 Set A/D encoding result=40 11:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:22 Set channel filter=0.000000e+000 result=40 11:05:22 Config A/D Result=40 11:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:22 Get A/D filter: -9.255963e+061 result=40 11:05:22 Get A/D value=-858993460 result=40 11:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:22 Parameters OK 11:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:22 Set A/D data flow result=40 11:05:22 Set A/D channel type result=40 11:05:22 Set A/D encoding result=40 11:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:22 Set channel filter=0.000000e+000 result=40 11:05:22 Config A/D Result=40 11:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:22 Get A/D filter: -9.255963e+061 result=40 11:05:22 Get A/D value=-858993460 result=40 11:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:22 Aux= 11:05:22 Message to Camera, serial 85824 queued 11:05:59 Received message from Master: op=PointingHead serial=85837 11:05:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:05:59 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:05:59 Point started: ret=0 11:05:59 point_skyscan result=0 11:06:00 Check angles 11:06:00 SkyScan query 11:06:00 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 11:06:00 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 11:06:00 Check angles 11:06:00 SkyScan query 11:06:01 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.495<-12433 Statuses=0009 0008 11:06:01 Msec=750 True Az=153.345 Ze=-6.495 Az status=0009 Ze status=0008 11:06:01 Check angles 11:06:01 SkyScan query 11:06:02 SkyScan query done: ret=0 az=170.79<-11386 ze=-6.495<-12433 Statuses=0009 0008 11:06:02 Msec=1500 True Az=170.79 Ze=-6.495 Az status=0009 Ze status=0008 11:06:02 Check angles 11:06:02 SkyScan query 11:06:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:06:02 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:06:02 Message to Master queued w/err=0: serial=85837 error=0 11:06:07 Received message from Master: op=Filter serial=85838 11:06:07 Color wheel filter change from 0 to 0 11:06:07 FLIGetFilterPos err=0 currentPosition=0 11:06:07 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:07 Filter is already there-color wheel unchanged 11:06:08 Received message from Master: op=Shutter serial=85839 11:06:08 Shutter LASER close 11:06:08 Received message from Camera: op=State serial=85841 11:06:08 GetSingleValue result=40 Value=cccccccc 11:06:08 SkyScan query 11:06:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:06:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:08 Parameters OK 11:06:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:08 Set A/D data flow result=40 11:06:08 Set A/D channel type result=40 11:06:08 Set A/D encoding result=40 11:06:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:08 Set channel filter=0.000000e+000 result=40 11:06:08 Config A/D Result=40 11:06:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:08 Get A/D filter: -9.255963e+061 result=40 11:06:08 Get A/D value=-858993460 result=40 11:06:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:08 Parameters OK 11:06:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:08 Set A/D data flow result=40 11:06:08 Set A/D channel type result=40 11:06:08 Set A/D encoding result=40 11:06:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:08 Set channel filter=0.000000e+000 result=40 11:06:08 Config A/D Result=40 11:06:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:08 Get A/D filter: -9.255963e+061 result=40 11:06:08 Get A/D value=-858993460 result=40 11:06:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:08 Aux= 11:06:08 Message to Camera, serial 85841 queued 11:06:45 Received message from Master: op=PointingHead serial=85854 11:06:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:06:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:06:45 Point started: ret=0 11:06:45 point_skyscan result=0 11:06:46 Check angles 11:06:46 SkyScan query 11:06:47 SkyScan query done: ret=0 az=152.58<-10172 ze=6.51<-11566 Statuses=0009 0008 11:06:47 Msec=0 True Az=152.58 Ze=6.51 Az status=0009 Ze status=0008 11:06:47 Check angles 11:06:47 SkyScan query 11:06:48 SkyScan query done: ret=0 az=134.67<-8978 ze=6.495<-11567 Statuses=0009 0008 11:06:48 Msec=750 True Az=134.67 Ze=6.495 Az status=0009 Ze status=0008 11:06:48 Check angles 11:06:48 SkyScan query 11:06:48 SkyScan query done: ret=0 az=117.21<-7814 ze=6.495<-11567 Statuses=0009 0008 11:06:48 Msec=1500 True Az=117.21 Ze=6.495 Az status=0009 Ze status=0008 11:06:48 Check angles 11:06:48 SkyScan query 11:06:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:06:49 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:06:49 Message to Master queued w/err=0: serial=85854 error=0 11:06:54 Received message from Master: op=Filter serial=85855 11:06:54 Color wheel filter change from 0 to 0 11:06:54 FLIGetFilterPos err=0 currentPosition=0 11:06:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:54 Filter is already there-color wheel unchanged 11:06:54 Received message from Master: op=Shutter serial=85856 11:06:54 Shutter LASER close 11:06:54 Received message from Camera: op=State serial=85858 11:06:54 GetSingleValue result=40 Value=cccccccc 11:06:54 SkyScan query 11:06:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:06:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:55 Parameters OK 11:06:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:55 Set A/D data flow result=40 11:06:55 Set A/D channel type result=40 11:06:55 Set A/D encoding result=40 11:06:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:55 Set channel filter=0.000000e+000 result=40 11:06:55 Config A/D Result=40 11:06:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:55 Get A/D filter: -9.255963e+061 result=40 11:06:55 Get A/D value=-858993460 result=40 11:06:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:55 Parameters OK 11:06:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:55 Set A/D data flow result=40 11:06:55 Set A/D channel type result=40 11:06:55 Set A/D encoding result=40 11:06:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:55 Set channel filter=0.000000e+000 result=40 11:06:55 Config A/D Result=40 11:06:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:55 Get A/D filter: -9.255963e+061 result=40 11:06:55 Get A/D value=-858993460 result=40 11:06:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:55 Aux= 11:06:55 Message to Camera, serial 85858 queued 11:07:32 Received message from Master: op=PointingHead serial=85871 11:07:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:07:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:07:32 Point started: ret=0 11:07:32 point_skyscan result=0 11:07:33 Check angles 11:07:33 SkyScan query 11:07:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 11:07:33 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 11:07:34 Check angles 11:07:34 SkyScan query 11:07:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.045<-15003 Statuses=0008 0009 11:07:34 Msec=750 True Az=112.995 Ze=-45.045 Az status=0008 Ze status=0009 11:07:34 Check angles 11:07:34 SkyScan query 11:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.015<-16401 Statuses=0008 0009 11:07:35 Msec=1500 True Az=112.995 Ze=-66.015 Az status=0008 Ze status=0009 11:07:35 Check angles 11:07:35 SkyScan query 11:07:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.94<-17796 Statuses=0008 0009 11:07:36 Msec=2250 True Az=112.995 Ze=-86.94 Az status=0008 Ze status=0009 11:07:36 Check angles 11:07:36 SkyScan query 11:07:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.91<-19194 Statuses=0008 0009 11:07:36 Msec=3000 True Az=112.995 Ze=-107.91 Az status=0008 Ze status=0009 11:07:37 Check angles 11:07:37 SkyScan query 11:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.85<-20590 Statuses=0008 0009 11:07:37 Msec=3750 True Az=112.995 Ze=-128.85 Az status=0008 Ze status=0009 11:07:37 Check angles 11:07:37 SkyScan query 11:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.805<-21987 Statuses=0008 0009 11:07:38 Msec=4500 True Az=112.995 Ze=-149.805 Az status=0008 Ze status=0009 11:07:38 Check angles 11:07:38 SkyScan query 11:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.715<-23381 Statuses=0008 0009 11:07:39 Msec=5250 True Az=112.995 Ze=-170.715 Az status=0008 Ze status=0009 11:07:39 Check angles 11:07:39 SkyScan query 11:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:07:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:07:39 Message to Master queued w/err=0: serial=85871 error=0 11:07:44 Received message from Master: op=Filter serial=85872 11:07:44 Color wheel filter change from 0 to 0 11:07:44 FLIGetFilterPos err=0 currentPosition=0 11:07:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:44 Filter is already there-color wheel unchanged 11:07:45 Received message from Master: op=Shutter serial=85873 11:07:45 Shutter LASER open 11:07:45 Received message from Camera: op=State serial=85875 11:07:45 GetSingleValue result=40 Value=cccccccc 11:07:45 SkyScan query 11:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:07:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:45 Parameters OK 11:07:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:45 Set A/D data flow result=40 11:07:45 Set A/D channel type result=40 11:07:45 Set A/D encoding result=40 11:07:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:45 Set channel filter=0.000000e+000 result=40 11:07:45 Config A/D Result=40 11:07:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:45 Get A/D filter: -9.255963e+061 result=40 11:07:45 Get A/D value=-858993460 result=40 11:07:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:45 Parameters OK 11:07:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:45 Set A/D data flow result=40 11:07:45 Set A/D channel type result=40 11:07:45 Set A/D encoding result=40 11:07:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:45 Set channel filter=0.000000e+000 result=40 11:07:45 Config A/D Result=40 11:07:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:45 Get A/D filter: -9.255963e+061 result=40 11:07:45 Get A/D value=-858993460 result=40 11:07:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:45 Aux= 11:07:45 Message to Camera, serial 85875 queued 11:07:54 Received message from Master: op=Shutter serial=85885 11:07:54 Shutter LASER close 11:07:54 Received message from Master: op=PointingHead serial=85889 11:07:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:07:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:07:54 Point started: ret=0 11:07:54 point_skyscan result=0 11:07:55 Check angles 11:07:55 SkyScan query 11:07:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 11:07:56 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 11:07:56 Check angles 11:07:56 SkyScan query 11:07:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.22<-20148 Statuses=0008 0009 11:07:57 Msec=750 True Az=112.995 Ze=-122.22 Az status=0008 Ze status=0009 11:07:57 Check angles 11:07:57 SkyScan query 11:07:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 11:07:57 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 11:07:57 Check angles 11:07:57 SkyScan query 11:07:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.31<-17354 Statuses=0008 0009 11:07:58 Msec=2250 True Az=112.995 Ze=-80.31 Az status=0008 Ze status=0009 11:07:58 Check angles 11:07:58 SkyScan query 11:07:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.37<-15958 Statuses=0008 0009 11:07:59 Msec=3000 True Az=112.995 Ze=-59.37 Az status=0008 Ze status=0009 11:07:59 Check angles 11:07:59 SkyScan query 11:08:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.4<-14560 Statuses=0008 0009 11:08:00 Msec=3750 True Az=112.995 Ze=-38.4 Az status=0008 Ze status=0009 11:08:00 Check angles 11:08:00 SkyScan query 11:08:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.46<-13164 Statuses=0008 0009 11:08:00 Msec=4500 True Az=112.995 Ze=-17.46 Az status=0008 Ze status=0009 11:08:00 Check angles 11:08:00 SkyScan query 11:08:01 SkyScan query done: ret=0 az=112.995<-7533 ze=3.51<-11766 Statuses=0008 0009 11:08:01 Msec=5250 True Az=112.995 Ze=3.51 Az status=0008 Ze status=0009 11:08:01 Check angles 11:08:01 SkyScan query 11:08:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:08:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:08:02 Message to Master queued w/err=0: serial=85889 error=0 11:08:07 Received message from Master: op=Filter serial=85890 11:08:07 Color wheel filter change from 0 to 0 11:08:07 FLIGetFilterPos err=0 currentPosition=0 11:08:07 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:07 Filter is already there-color wheel unchanged 11:08:07 Received message from Master: op=Shutter serial=85891 11:08:07 Shutter LASER close 11:08:07 Received message from Camera: op=State serial=85893 11:08:07 GetSingleValue result=40 Value=cccccccc 11:08:07 SkyScan query 11:08:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:08:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:08 Parameters OK 11:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:08 Set A/D data flow result=40 11:08:08 Set A/D channel type result=40 11:08:08 Set A/D encoding result=40 11:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:08 Set channel filter=0.000000e+000 result=40 11:08:08 Config A/D Result=40 11:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:08 Get A/D filter: -9.255963e+061 result=40 11:08:08 Get A/D value=-858993460 result=40 11:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:08 Parameters OK 11:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:08 Set A/D data flow result=40 11:08:08 Set A/D channel type result=40 11:08:08 Set A/D encoding result=40 11:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:08 Set channel filter=0.000000e+000 result=40 11:08:08 Config A/D Result=40 11:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:08 Get A/D filter: -9.255963e+061 result=40 11:08:08 Get A/D value=-858993460 result=40 11:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:08 Aux= 11:08:08 Message to Camera, serial 85893 queued 11:08:45 Received message from Master: op=PointingHead serial=85906 11:08:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:08:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:08:45 Point started: ret=0 11:08:45 point_skyscan result=0 11:08:46 Check angles 11:08:46 SkyScan query 11:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:08:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:08:46 Message to Master queued w/err=0: serial=85906 error=0 11:08:51 Received message from Master: op=Filter serial=85907 11:08:51 Color wheel filter change from 0 to 0 11:08:51 FLIGetFilterPos err=0 currentPosition=0 11:08:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:51 Filter is already there-color wheel unchanged 11:08:51 Received message from Master: op=Shutter serial=85908 11:08:51 Shutter LASER close 11:08:51 Received message from Camera: op=State serial=85910 11:08:51 GetSingleValue result=40 Value=cccccccc 11:08:51 SkyScan query 11:08:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:08:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:52 Parameters OK 11:08:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:52 Set A/D data flow result=40 11:08:52 Set A/D channel type result=40 11:08:52 Set A/D encoding result=40 11:08:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:52 Set channel filter=0.000000e+000 result=40 11:08:52 Config A/D Result=40 11:08:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:52 Get A/D filter: -9.255963e+061 result=40 11:08:52 Get A/D value=-858993460 result=40 11:08:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:52 Parameters OK 11:08:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:52 Set A/D data flow result=40 11:08:52 Set A/D channel type result=40 11:08:52 Set A/D encoding result=40 11:08:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:52 Set channel filter=0.000000e+000 result=40 11:08:52 Config A/D Result=40 11:08:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:52 Get A/D filter: -9.255963e+061 result=40 11:08:52 Get A/D value=-858993460 result=40 11:08:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:52 Aux= 11:08:52 Message to Camera, serial 85910 queued 11:09:29 Received message from Master: op=PointingHead serial=85923 11:09:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:09:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:09:29 Point started: ret=0 11:09:29 point_skyscan result=0 11:09:30 Check angles 11:09:30 SkyScan query 11:09:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:09:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:09:31 Message to Master queued w/err=0: serial=85923 error=0 11:09:36 Received message from Master: op=Filter serial=85924 11:09:36 Color wheel filter change from 0 to 0 11:09:36 FLIGetFilterPos err=0 currentPosition=0 11:09:36 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:36 Filter is already there-color wheel unchanged 11:09:36 Received message from Master: op=Shutter serial=85925 11:09:36 Shutter LASER close 11:09:36 Received message from Camera: op=State serial=85927 11:09:36 GetSingleValue result=40 Value=cccccccc 11:09:36 SkyScan query 11:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:09:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:36 Parameters OK 11:09:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:36 Set A/D data flow result=40 11:09:36 Set A/D channel type result=40 11:09:36 Set A/D encoding result=40 11:09:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:36 Set channel filter=0.000000e+000 result=40 11:09:36 Config A/D Result=40 11:09:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:36 Get A/D filter: -9.255963e+061 result=40 11:09:36 Get A/D value=-858993460 result=40 11:09:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:36 Parameters OK 11:09:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:36 Set A/D data flow result=40 11:09:36 Set A/D channel type result=40 11:09:36 Set A/D encoding result=40 11:09:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:36 Set channel filter=0.000000e+000 result=40 11:09:36 Config A/D Result=40 11:09:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:36 Get A/D filter: -9.255963e+061 result=40 11:09:36 Get A/D value=-858993460 result=40 11:09:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:36 Aux= 11:09:36 Message to Camera, serial 85927 queued 11:10:13 Received message from Master: op=PointingHead serial=85940 11:10:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:10:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:10:14 Point started: ret=0 11:10:14 point_skyscan result=0 11:10:14 Check angles 11:10:14 SkyScan query 11:10:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:10:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:10:15 Message to Master queued w/err=0: serial=85940 error=0 11:10:20 Received message from Master: op=Filter serial=85941 11:10:20 Color wheel filter change from 0 to 0 11:10:20 FLIGetFilterPos err=0 currentPosition=0 11:10:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:10:20 Filter is already there-color wheel unchanged 11:10:20 Received message from Master: op=Shutter serial=85942 11:10:20 Shutter LASER close 11:10:20 Received message from Camera: op=State serial=85944 11:10:20 GetSingleValue result=40 Value=cccccccc 11:10:20 SkyScan query 11:10:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:10:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:21 Parameters OK 11:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:21 Set A/D data flow result=40 11:10:21 Set A/D channel type result=40 11:10:21 Set A/D encoding result=40 11:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:21 Set channel filter=0.000000e+000 result=40 11:10:21 Config A/D Result=40 11:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:21 Get A/D filter: -9.255963e+061 result=40 11:10:21 Get A/D value=-858993460 result=40 11:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:21 Parameters OK 11:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:21 Set A/D data flow result=40 11:10:21 Set A/D channel type result=40 11:10:21 Set A/D encoding result=40 11:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:21 Set channel filter=0.000000e+000 result=40 11:10:21 Config A/D Result=40 11:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:21 Get A/D filter: -9.255963e+061 result=40 11:10:21 Get A/D value=-858993460 result=40 11:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:10:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:10:21 Aux= 11:10:21 Message to Camera, serial 85944 queued 11:10:57 Received message from Master: op=PointingHead serial=85956 11:10:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:10:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:10:57 Point started: ret=0 11:10:57 point_skyscan result=0 11:10:58 Check angles 11:10:58 SkyScan query 11:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 11:10:58 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 11:10:58 Check angles 11:10:58 SkyScan query 11:10:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 11:10:59 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 11:10:59 Check angles 11:10:59 SkyScan query 11:11:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 11:11:00 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 11:11:00 Check angles 11:11:00 SkyScan query 11:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 11:11:01 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 11:11:01 Check angles 11:11:01 SkyScan query 11:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.895<-19193 Statuses=0008 0009 11:11:01 Msec=3000 True Az=112.995 Ze=-107.895 Az status=0008 Ze status=0009 11:11:01 Check angles 11:11:01 SkyScan query 11:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.835<-20589 Statuses=0008 0009 11:11:02 Msec=3750 True Az=112.995 Ze=-128.835 Az status=0008 Ze status=0009 11:11:02 Check angles 11:11:02 SkyScan query 11:11:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.79<-21986 Statuses=0008 0009 11:11:03 Msec=4500 True Az=112.995 Ze=-149.79 Az status=0008 Ze status=0009 11:11:03 Check angles 11:11:03 SkyScan query 11:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 11:11:04 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 11:11:04 Check angles 11:11:04 SkyScan query 11:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:11:04 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:11:04 Message to Master queued w/err=0: serial=85956 error=0 11:11:09 Received message from Master: op=Filter serial=85957 11:11:09 Color wheel filter change from 0 to 0 11:11:09 FLIGetFilterPos err=0 currentPosition=0 11:11:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:09 Filter is already there-color wheel unchanged 11:11:09 Received message from Master: op=Shutter serial=85958 11:11:09 Shutter LASER open 11:11:10 Received message from Camera: op=State serial=85960 11:11:10 GetSingleValue result=40 Value=cccccccc 11:11:10 SkyScan query 11:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:11:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:10 Parameters OK 11:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:10 Set A/D data flow result=40 11:11:10 Set A/D channel type result=40 11:11:10 Set A/D encoding result=40 11:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:10 Set channel filter=0.000000e+000 result=40 11:11:10 Config A/D Result=40 11:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:10 Get A/D filter: -9.255963e+061 result=40 11:11:10 Get A/D value=-858993460 result=40 11:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:10 Parameters OK 11:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:10 Set A/D data flow result=40 11:11:10 Set A/D channel type result=40 11:11:10 Set A/D encoding result=40 11:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:10 Set channel filter=0.000000e+000 result=40 11:11:10 Config A/D Result=40 11:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:10 Get A/D filter: -9.255963e+061 result=40 11:11:10 Get A/D value=-858993460 result=40 11:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:10 Aux= 11:11:10 Message to Camera, serial 85960 queued 11:11:19 Received message from Master: op=Shutter serial=85970 11:11:19 Shutter LASER close 11:11:19 Received message from Master: op=PointingHead serial=85974 11:11:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:11:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:11:20 Point started: ret=0 11:11:20 point_skyscan result=0 11:11:20 Check angles 11:11:20 SkyScan query 11:11:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 11:11:21 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 11:11:21 Check angles 11:11:21 SkyScan query 11:11:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 11:11:22 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 11:11:22 Check angles 11:11:22 SkyScan query 11:11:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 11:11:22 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 11:11:23 Check angles 11:11:23 SkyScan query 11:11:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 11:11:23 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 11:11:23 Check angles 11:11:23 SkyScan query 11:11:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 11:11:24 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 11:11:24 Check angles 11:11:24 SkyScan query 11:11:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 11:11:25 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 11:11:25 Check angles 11:11:25 SkyScan query 11:11:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 11:11:25 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 11:11:26 Check angles 11:11:26 SkyScan query 11:11:26 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 11:11:26 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 11:11:26 Check angles 11:11:26 SkyScan query 11:11:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:11:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:11:27 Message to Master queued w/err=0: serial=85974 error=0 11:11:32 Received message from Master: op=Filter serial=85975 11:11:32 Color wheel filter change from 0 to 0 11:11:32 FLIGetFilterPos err=0 currentPosition=0 11:11:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:32 Filter is already there-color wheel unchanged 11:11:32 Received message from Master: op=Shutter serial=85976 11:11:32 Shutter LASER close 11:11:32 Received message from Camera: op=State serial=85978 11:11:32 GetSingleValue result=40 Value=cccccccc 11:11:32 SkyScan query 11:11:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:11:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:33 Parameters OK 11:11:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:33 Set A/D data flow result=40 11:11:33 Set A/D channel type result=40 11:11:33 Set A/D encoding result=40 11:11:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:33 Set channel filter=0.000000e+000 result=40 11:11:33 Config A/D Result=40 11:11:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:33 Get A/D filter: -9.255963e+061 result=40 11:11:33 Get A/D value=-858993460 result=40 11:11:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:33 Parameters OK 11:11:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:33 Set A/D data flow result=40 11:11:33 Set A/D channel type result=40 11:11:33 Set A/D encoding result=40 11:11:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:33 Set channel filter=0.000000e+000 result=40 11:11:33 Config A/D Result=40 11:11:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:33 Get A/D filter: -9.255963e+061 result=40 11:11:33 Get A/D value=-858993460 result=40 11:11:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:33 Aux= 11:11:33 Message to Camera, serial 85978 queued 11:12:10 Received message from Master: op=PointingHead serial=85991 11:12:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:12:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:12:10 Point started: ret=0 11:12:10 point_skyscan result=0 11:12:11 Check angles 11:12:11 SkyScan query 11:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:12:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:12:11 Message to Master queued w/err=0: serial=85991 error=0 11:12:16 Received message from Master: op=Filter serial=85992 11:12:16 Color wheel filter change from 0 to 0 11:12:16 FLIGetFilterPos err=0 currentPosition=0 11:12:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:16 Filter is already there-color wheel unchanged 11:12:17 Received message from Master: op=Shutter serial=85993 11:12:17 Shutter LASER close 11:12:17 Received message from Camera: op=State serial=85995 11:12:17 GetSingleValue result=40 Value=cccccccc 11:12:17 SkyScan query 11:12:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:12:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:17 Parameters OK 11:12:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:17 Set A/D data flow result=40 11:12:17 Set A/D channel type result=40 11:12:17 Set A/D encoding result=40 11:12:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:17 Set channel filter=0.000000e+000 result=40 11:12:17 Config A/D Result=40 11:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:17 Get A/D filter: -9.255963e+061 result=40 11:12:17 Get A/D value=-858993460 result=40 11:12:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:17 Parameters OK 11:12:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:17 Set A/D data flow result=40 11:12:17 Set A/D channel type result=40 11:12:17 Set A/D encoding result=40 11:12:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:17 Set channel filter=0.000000e+000 result=40 11:12:17 Config A/D Result=40 11:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:17 Get A/D filter: -9.255963e+061 result=40 11:12:17 Get A/D value=-858993460 result=40 11:12:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:17 Aux= 11:12:17 Message to Camera, serial 85995 queued 11:12:54 Received message from Master: op=PointingHead serial=86008 11:12:54 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:12:54 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:12:54 Point started: ret=0 11:12:54 point_skyscan result=0 11:12:55 Check angles 11:12:55 SkyScan query 11:12:56 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 11:12:56 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 11:12:56 Check angles 11:12:56 SkyScan query 11:12:56 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.495<-12433 Statuses=0009 0008 11:12:56 Msec=750 True Az=153.51 Ze=-6.495 Az status=0009 Ze status=0008 11:12:57 Check angles 11:12:57 SkyScan query 11:12:57 SkyScan query done: ret=0 az=170.985<-11399 ze=-6.495<-12433 Statuses=0009 0008 11:12:57 Msec=1500 True Az=170.985 Ze=-6.495 Az status=0009 Ze status=0008 11:12:57 Check angles 11:12:57 SkyScan query 11:12:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:12:58 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:12:58 Message to Master queued w/err=0: serial=86008 error=0 11:13:03 Received message from Master: op=Filter serial=86009 11:13:03 Color wheel filter change from 0 to 0 11:13:03 FLIGetFilterPos err=0 currentPosition=0 11:13:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:03 Filter is already there-color wheel unchanged 11:13:03 Received message from Master: op=Shutter serial=86010 11:13:03 Shutter LASER close 11:13:03 Received message from Camera: op=State serial=86012 11:13:03 GetSingleValue result=40 Value=cccccccc 11:13:03 SkyScan query 11:13:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:13:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:04 Parameters OK 11:13:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:04 Set A/D data flow result=40 11:13:04 Set A/D channel type result=40 11:13:04 Set A/D encoding result=40 11:13:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:04 Set channel filter=0.000000e+000 result=40 11:13:04 Config A/D Result=40 11:13:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:04 Get A/D filter: -9.255963e+061 result=40 11:13:04 Get A/D value=-858993460 result=40 11:13:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:04 Parameters OK 11:13:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:04 Set A/D data flow result=40 11:13:04 Set A/D channel type result=40 11:13:04 Set A/D encoding result=40 11:13:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:04 Set channel filter=0.000000e+000 result=40 11:13:04 Config A/D Result=40 11:13:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:04 Get A/D filter: -9.255963e+061 result=40 11:13:04 Get A/D value=-858993460 result=40 11:13:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:04 Aux= 11:13:04 Message to Camera, serial 86012 queued 11:13:41 Received message from Master: op=PointingHead serial=86025 11:13:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:13:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:13:41 Point started: ret=0 11:13:41 point_skyscan result=0 11:13:42 Check angles 11:13:42 SkyScan query 11:13:42 SkyScan query done: ret=0 az=152.745<-10183 ze=6.51<-11566 Statuses=0009 0008 11:13:42 Msec=0 True Az=152.745 Ze=6.51 Az status=0009 Ze status=0008 11:13:42 Check angles 11:13:42 SkyScan query 11:13:43 SkyScan query done: ret=0 az=134.79<-8986 ze=6.495<-11567 Statuses=0009 0008 11:13:43 Msec=750 True Az=134.79 Ze=6.495 Az status=0009 Ze status=0008 11:13:43 Check angles 11:13:43 SkyScan query 11:13:44 SkyScan query done: ret=0 az=117.39<-7826 ze=6.495<-11567 Statuses=0009 0008 11:13:44 Msec=1500 True Az=117.39 Ze=6.495 Az status=0009 Ze status=0008 11:13:44 Check angles 11:13:44 SkyScan query 11:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:13:44 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:13:44 Message to Master queued w/err=0: serial=86025 error=0 11:13:49 Received message from Master: op=Filter serial=86026 11:13:49 Color wheel filter change from 0 to 0 11:13:49 FLIGetFilterPos err=0 currentPosition=0 11:13:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:49 Filter is already there-color wheel unchanged 11:13:50 Received message from Master: op=Shutter serial=86027 11:13:50 Shutter LASER close 11:13:50 Received message from Camera: op=State serial=86029 11:13:50 GetSingleValue result=40 Value=cccccccc 11:13:50 SkyScan query 11:13:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:13:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:50 Parameters OK 11:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:50 Set A/D data flow result=40 11:13:50 Set A/D channel type result=40 11:13:50 Set A/D encoding result=40 11:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:50 Set channel filter=0.000000e+000 result=40 11:13:50 Config A/D Result=40 11:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:50 Get A/D filter: -9.255963e+061 result=40 11:13:50 Get A/D value=-858993460 result=40 11:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:50 Parameters OK 11:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:50 Set A/D data flow result=40 11:13:50 Set A/D channel type result=40 [UTC 2019-3-3 11:13:50] 11:13:50 Set A/D encoding result=40 11:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:50 Set channel filter=0.000000e+000 result=40 11:13:50 Config A/D Result=40 11:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:50 Get A/D filter: -9.255963e+061 result=40 11:13:50 Get A/D value=-858993460 result=40 11:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:50 Aux= 11:13:50 Message to Camera, serial 86029 queued 11:14:27 Received message from Master: op=PointingHead serial=86042 11:14:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:14:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:14:28 Point started: ret=0 11:14:28 point_skyscan result=0 11:14:28 Check angles 11:14:28 SkyScan query 11:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 11:14:29 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 11:14:29 Check angles 11:14:29 SkyScan query 11:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 11:14:30 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 11:14:30 Check angles 11:14:30 SkyScan query 11:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 11:14:30 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 11:14:31 Check angles 11:14:31 SkyScan query 11:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 11:14:31 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 11:14:31 Check angles 11:14:31 SkyScan query 11:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.48<-19232 Statuses=0008 0009 11:14:32 Msec=3000 True Az=112.995 Ze=-108.48 Az status=0008 Ze status=0009 11:14:32 Check angles 11:14:32 SkyScan query 11:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.435<-20629 Statuses=0008 0009 11:14:33 Msec=3750 True Az=112.995 Ze=-129.435 Az status=0008 Ze status=0009 11:14:33 Check angles 11:14:33 SkyScan query 11:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.39<-22026 Statuses=0008 0009 11:14:33 Msec=4500 True Az=112.995 Ze=-150.39 Az status=0008 Ze status=0009 11:14:34 Check angles 11:14:34 SkyScan query 11:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0008 0009 11:14:34 Msec=5250 True Az=112.995 Ze=-171.165 Az status=0008 Ze status=0009 11:14:34 Check angles 11:14:34 SkyScan query 11:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:14:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:14:35 Message to Master queued w/err=0: serial=86042 error=0 11:14:40 Received message from Master: op=Filter serial=86043 11:14:40 Color wheel filter change from 0 to 0 11:14:40 FLIGetFilterPos err=0 currentPosition=0 11:14:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:40 Filter is already there-color wheel unchanged 11:14:40 Received message from Master: op=Shutter serial=86044 11:14:40 Shutter LASER open 11:14:40 Received message from Camera: op=State serial=86046 11:14:40 GetSingleValue result=40 Value=cccccccc 11:14:40 SkyScan query 11:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:14:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:41 Parameters OK 11:14:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:41 Set A/D data flow result=40 11:14:41 Set A/D channel type result=40 11:14:41 Set A/D encoding result=40 11:14:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:41 Set channel filter=0.000000e+000 result=40 11:14:41 Config A/D Result=40 11:14:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:41 Get A/D filter: -9.255963e+061 result=40 11:14:41 Get A/D value=-858993460 result=40 11:14:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:41 Parameters OK 11:14:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:41 Set A/D data flow result=40 11:14:41 Set A/D channel type result=40 11:14:41 Set A/D encoding result=40 11:14:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:41 Set channel filter=0.000000e+000 result=40 11:14:41 Config A/D Result=40 11:14:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:41 Get A/D filter: -9.255963e+061 result=40 11:14:41 Get A/D value=-858993460 result=40 11:14:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:41 Aux= 11:14:41 Message to Camera, serial 86046 queued 11:14:49 Received message from Master: op=Shutter serial=86056 11:14:49 Shutter LASER close 11:14:50 Received message from Master: op=PointingHead serial=86060 11:14:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:14:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:14:50 Point started: ret=0 11:14:50 point_skyscan result=0 11:14:51 Check angles 11:14:51 SkyScan query 11:14:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 11:14:51 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 11:14:52 Check angles 11:14:52 SkyScan query 11:14:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 11:14:52 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 11:14:52 Check angles 11:14:52 SkyScan query 11:14:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 11:14:53 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 11:14:53 Check angles 11:14:53 SkyScan query 11:14:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 11:14:54 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 11:14:54 Check angles 11:14:54 SkyScan query 11:14:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 11:14:54 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 11:14:55 Check angles 11:14:55 SkyScan query 11:14:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.785<-14519 Statuses=0008 0009 11:14:55 Msec=3750 True Az=112.995 Ze=-37.785 Az status=0008 Ze status=0009 11:14:55 Check angles 11:14:55 SkyScan query 11:14:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 11:14:56 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 11:14:56 Check angles 11:14:56 SkyScan query 11:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=4.11<-11726 Statuses=0008 0009 11:14:57 Msec=5250 True Az=112.995 Ze=4.11 Az status=0008 Ze status=0009 11:14:57 Check angles 11:14:57 SkyScan query 11:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:14:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:14:57 Message to Master queued w/err=0: serial=86060 error=0 11:15:02 Received message from Master: op=Filter serial=86061 11:15:02 Color wheel filter change from 0 to 0 11:15:02 FLIGetFilterPos err=0 currentPosition=0 11:15:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:02 Filter is already there-color wheel unchanged 11:15:03 Received message from Master: op=Shutter serial=86062 11:15:03 Shutter LASER close 11:15:03 Received message from Camera: op=State serial=86064 11:15:03 GetSingleValue result=40 Value=cccccccc 11:15:03 SkyScan query 11:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:15:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:03 Parameters OK 11:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:03 Set A/D data flow result=40 11:15:03 Set A/D channel type result=40 11:15:03 Set A/D encoding result=40 11:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:03 Set channel filter=0.000000e+000 result=40 11:15:03 Config A/D Result=40 11:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:03 Get A/D filter: -9.255963e+061 result=40 11:15:03 Get A/D value=-858993460 result=40 11:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:03 Parameters OK 11:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:03 Set A/D data flow result=40 11:15:03 Set A/D channel type result=40 11:15:03 Set A/D encoding result=40 11:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:03 Set channel filter=0.000000e+000 result=40 11:15:03 Config A/D Result=40 11:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:03 Get A/D filter: -9.255963e+061 result=40 11:15:03 Get A/D value=-858993460 result=40 11:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:03 Aux= 11:15:03 Message to Camera, serial 86064 queued 11:15:40 Received message from Master: op=PointingHead serial=86077 11:15:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:15:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:15:40 Point started: ret=0 11:15:40 point_skyscan result=0 11:15:41 Check angles 11:15:41 SkyScan query 11:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:15:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:15:42 Message to Master queued w/err=0: serial=86077 error=0 11:15:47 Received message from Master: op=Filter serial=86078 11:15:47 Color wheel filter change from 0 to 0 11:15:47 FLIGetFilterPos err=0 currentPosition=0 11:15:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:47 Filter is already there-color wheel unchanged 11:15:47 Received message from Master: op=Shutter serial=86079 11:15:47 Shutter LASER close 11:15:47 Received message from Camera: op=State serial=86081 11:15:47 GetSingleValue result=40 Value=cccccccc 11:15:47 SkyScan query 11:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:15:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:48 Parameters OK 11:15:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:48 Set A/D data flow result=40 11:15:48 Set A/D channel type result=40 11:15:48 Set A/D encoding result=40 11:15:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:48 Set channel filter=0.000000e+000 result=40 11:15:48 Config A/D Result=40 11:15:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:48 Get A/D filter: -9.255963e+061 result=40 11:15:48 Get A/D value=-858993460 result=40 11:15:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:48 Parameters OK 11:15:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:48 Set A/D data flow result=40 11:15:48 Set A/D channel type result=40 11:15:48 Set A/D encoding result=40 11:15:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:48 Set channel filter=0.000000e+000 result=40 11:15:48 Config A/D Result=40 11:15:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:48 Get A/D filter: -9.255963e+061 result=40 11:15:48 Get A/D value=-858993460 result=40 11:15:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:48 Aux= 11:15:48 Message to Camera, serial 86081 queued 11:16:24 Received message from Master: op=PointingHead serial=86094 11:16:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:16:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:16:25 Point started: ret=0 11:16:25 point_skyscan result=0 11:16:26 Check angles 11:16:26 SkyScan query 11:16:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:16:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:16:26 Message to Master queued w/err=0: serial=86094 error=0 11:16:31 Received message from Master: op=Filter serial=86095 11:16:31 Color wheel filter change from 0 to 0 11:16:31 FLIGetFilterPos err=0 currentPosition=0 11:16:31 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:31 Filter is already there-color wheel unchanged 11:16:31 Received message from Master: op=Shutter serial=86096 11:16:31 Shutter LASER close 11:16:31 Received message from Camera: op=State serial=86098 11:16:31 GetSingleValue result=40 Value=cccccccc 11:16:31 SkyScan query 11:16:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:16:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:32 Parameters OK 11:16:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:32 Set A/D data flow result=40 11:16:32 Set A/D channel type result=40 11:16:32 Set A/D encoding result=40 11:16:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:32 Set channel filter=0.000000e+000 result=40 11:16:32 Config A/D Result=40 11:16:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:32 Get A/D filter: -9.255963e+061 result=40 11:16:32 Get A/D value=-858993460 result=40 11:16:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:32 Parameters OK 11:16:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:32 Set A/D data flow result=40 11:16:32 Set A/D channel type result=40 11:16:32 Set A/D encoding result=40 11:16:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:32 Set channel filter=0.000000e+000 result=40 11:16:32 Config A/D Result=40 11:16:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:32 Get A/D filter: -9.255963e+061 result=40 11:16:32 Get A/D value=-858993460 result=40 11:16:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:32 Aux= 11:16:32 Message to Camera, serial 86098 queued 11:17:09 Received message from Master: op=PointingHead serial=86111 11:17:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:17:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:17:09 Point started: ret=0 11:17:09 point_skyscan result=0 11:17:10 Check angles 11:17:10 SkyScan query 11:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:17:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:17:10 Message to Master queued w/err=0: serial=86111 error=0 11:17:15 Received message from Master: op=Filter serial=86112 11:17:15 Color wheel filter change from 0 to 0 11:17:15 FLIGetFilterPos err=0 currentPosition=0 11:17:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:15 Filter is already there-color wheel unchanged 11:17:16 Received message from Master: op=Shutter serial=86113 11:17:16 Shutter LASER close 11:17:16 Received message from Camera: op=State serial=86115 11:17:16 GetSingleValue result=40 Value=cccccccc 11:17:16 SkyScan query 11:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:17:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:16 Parameters OK 11:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:16 Set A/D data flow result=40 11:17:16 Set A/D channel type result=40 11:17:16 Set A/D encoding result=40 11:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:16 Set channel filter=0.000000e+000 result=40 11:17:16 Config A/D Result=40 11:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:16 Get A/D filter: -9.255963e+061 result=40 11:17:16 Get A/D value=-858993460 result=40 11:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:16 Parameters OK 11:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:16 Set A/D data flow result=40 11:17:16 Set A/D channel type result=40 11:17:16 Set A/D encoding result=40 11:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:16 Set channel filter=0.000000e+000 result=40 11:17:16 Config A/D Result=40 11:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:16 Get A/D filter: -9.255963e+061 result=40 11:17:16 Get A/D value=-858993460 result=40 11:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:16 Aux= 11:17:16 Message to Camera, serial 86115 queued 11:17:53 Received message from Master: op=PointingHead serial=86128 11:17:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:17:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:17:53 Point started: ret=0 11:17:53 point_skyscan result=0 11:17:54 Check angles 11:17:54 SkyScan query 11:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 11:17:55 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 11:17:55 Check angles 11:17:55 SkyScan query 11:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 11:17:55 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 11:17:56 Check angles 11:17:56 SkyScan query 11:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.295<-16353 Statuses=0008 0009 11:17:56 Msec=1500 True Az=112.995 Ze=-65.295 Az status=0008 Ze status=0009 11:17:56 Check angles 11:17:56 SkyScan query 11:17:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.25<-17750 Statuses=0008 0009 11:17:57 Msec=2250 True Az=112.995 Ze=-86.25 Az status=0008 Ze status=0009 11:17:57 Check angles 11:17:57 SkyScan query 11:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.19<-19146 Statuses=0008 0009 11:17:58 Msec=3000 True Az=112.995 Ze=-107.19 Az status=0008 Ze status=0009 11:17:58 Check angles 11:17:58 SkyScan query 11:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.145<-20543 Statuses=0008 0009 11:17:58 Msec=3750 True Az=112.995 Ze=-128.145 Az status=0008 Ze status=0009 11:17:59 Check angles 11:17:59 SkyScan query 11:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.115<-21941 Statuses=0008 0009 11:17:59 Msec=4500 True Az=112.995 Ze=-149.115 Az status=0008 Ze status=0009 11:17:59 Check angles 11:17:59 SkyScan query 11:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.055<-23337 Statuses=0008 0009 11:18:00 Msec=5250 True Az=112.995 Ze=-170.055 Az status=0008 Ze status=0009 11:18:00 Check angles 11:18:00 SkyScan query 11:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:18:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:18:01 Message to Master queued w/err=0: serial=86128 error=0 11:18:06 Received message from Master: op=Filter serial=86129 11:18:06 Color wheel filter change from 0 to 0 11:18:06 FLIGetFilterPos err=0 currentPosition=0 11:18:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:06 Filter is already there-color wheel unchanged 11:18:06 Received message from Master: op=Shutter serial=86130 11:18:06 Shutter LASER open 11:18:06 Received message from Camera: op=State serial=86132 11:18:06 GetSingleValue result=40 Value=cccccccc 11:18:06 SkyScan query 11:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:18:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:07 Parameters OK 11:18:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:07 Set A/D data flow result=40 11:18:07 Set A/D channel type result=40 11:18:07 Set A/D encoding result=40 11:18:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:07 Set channel filter=0.000000e+000 result=40 11:18:07 Config A/D Result=40 11:18:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:07 Get A/D filter: -9.255963e+061 result=40 11:18:07 Get A/D value=-858993460 result=40 11:18:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:07 Parameters OK 11:18:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:07 Set A/D data flow result=40 11:18:07 Set A/D channel type result=40 11:18:07 Set A/D encoding result=40 11:18:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:07 Set channel filter=0.000000e+000 result=40 11:18:07 Config A/D Result=40 11:18:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:07 Get A/D filter: -9.255963e+061 result=40 11:18:07 Get A/D value=-858993460 result=40 11:18:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:07 Aux= 11:18:07 Message to Camera, serial 86132 queued 11:18:15 Received message from Master: op=Shutter serial=86142 11:18:15 Shutter LASER close 11:18:16 Received message from Master: op=PointingHead serial=86146 11:18:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:18:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:18:16 Point started: ret=0 11:18:16 point_skyscan result=0 11:18:17 Check angles 11:18:17 SkyScan query 11:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 11:18:17 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 11:18:18 Check angles 11:18:18 SkyScan query 11:18:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 11:18:18 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 11:18:18 Check angles 11:18:18 SkyScan query 11:18:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.38<-18692 Statuses=0008 0009 11:18:19 Msec=1500 True Az=112.995 Ze=-100.38 Az status=0008 Ze status=0009 11:18:19 Check angles 11:18:19 SkyScan query 11:18:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 11:18:20 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 11:18:20 Check angles 11:18:20 SkyScan query 11:18:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 11:18:20 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 11:18:21 Check angles 11:18:21 SkyScan query 11:18:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.515<-14501 Statuses=0008 0009 11:18:21 Msec=3750 True Az=112.995 Ze=-37.515 Az status=0008 Ze status=0009 11:18:21 Check angles 11:18:21 SkyScan query 11:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.545<-13103 Statuses=0008 0009 11:18:22 Msec=4500 True Az=112.995 Ze=-16.545 Az status=0008 Ze status=0009 11:18:22 Check angles 11:18:22 SkyScan query 11:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 11:18:23 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 11:18:23 Check angles 11:18:23 SkyScan query 11:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:18:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:18:23 Message to Master queued w/err=0: serial=86146 error=0 11:18:28 Received message from Master: op=Filter serial=86147 11:18:28 Color wheel filter change from 0 to 0 11:18:28 FLIGetFilterPos err=0 currentPosition=0 11:18:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:28 Filter is already there-color wheel unchanged 11:18:29 Received message from Master: op=Shutter serial=86148 11:18:29 Shutter LASER close 11:18:29 Received message from Camera: op=State serial=86150 11:18:29 GetSingleValue result=40 Value=cccccccc 11:18:29 SkyScan query 11:18:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:18:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:29 Parameters OK 11:18:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:29 Set A/D data flow result=40 11:18:29 Set A/D channel type result=40 11:18:29 Set A/D encoding result=40 11:18:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:29 Set channel filter=0.000000e+000 result=40 11:18:29 Config A/D Result=40 11:18:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:29 Get A/D filter: -9.255963e+061 result=40 11:18:29 Get A/D value=-858993460 result=40 11:18:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:29 Parameters OK 11:18:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:29 Set A/D data flow result=40 11:18:29 Set A/D channel type result=40 11:18:29 Set A/D encoding result=40 11:18:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:29 Set channel filter=0.000000e+000 result=40 11:18:29 Config A/D Result=40 11:18:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:29 Get A/D filter: -9.255963e+061 result=40 11:18:29 Get A/D value=-858993460 result=40 11:18:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:29 Aux= 11:18:29 Message to Camera, serial 86150 queued 11:19:06 Received message from Master: op=PointingHead serial=86163 11:19:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:19:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:19:06 Point started: ret=0 11:19:06 point_skyscan result=0 11:19:07 Check angles 11:19:07 SkyScan query 11:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:19:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:19:08 Message to Master queued w/err=0: serial=86163 error=0 11:19:13 Received message from Master: op=Filter serial=86164 11:19:13 Color wheel filter change from 0 to 0 11:19:13 FLIGetFilterPos err=0 currentPosition=0 11:19:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:13 Filter is already there-color wheel unchanged 11:19:13 Received message from Master: op=Shutter serial=86165 11:19:13 Shutter LASER close 11:19:13 Received message from Camera: op=State serial=86167 11:19:13 GetSingleValue result=40 Value=cccccccc 11:19:13 SkyScan query 11:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:14 Parameters OK 11:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:14 Set A/D data flow result=40 11:19:14 Set A/D channel type result=40 11:19:14 Set A/D encoding result=40 11:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:14 Set channel filter=0.000000e+000 result=40 11:19:14 Config A/D Result=40 11:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:14 Get A/D filter: -9.255963e+061 result=40 11:19:14 Get A/D value=-858993460 result=40 11:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:14 Parameters OK 11:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:14 Set A/D data flow result=40 11:19:14 Set A/D channel type result=40 11:19:14 Set A/D encoding result=40 11:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:14 Set channel filter=0.000000e+000 result=40 11:19:14 Config A/D Result=40 11:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:14 Get A/D filter: -9.255963e+061 result=40 11:19:14 Get A/D value=-858993460 result=40 11:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:14 Aux= 11:19:14 Message to Camera, serial 86167 queued 11:19:50 Received message from Master: op=PointingHead serial=86180 11:19:50 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:19:50 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:19:51 Point started: ret=0 11:19:51 point_skyscan result=0 11:19:52 Check angles 11:19:52 SkyScan query 11:19:52 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 11:19:52 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 11:19:52 Check angles 11:19:52 SkyScan query 11:19:53 SkyScan query done: ret=0 az=153.81<-10254 ze=-6.495<-12433 Statuses=0009 0008 11:19:53 Msec=750 True Az=153.81 Ze=-6.495 Az status=0009 Ze status=0008 11:19:53 Check angles 11:19:53 SkyScan query 11:19:54 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 11:19:54 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 11:19:54 Check angles 11:19:54 SkyScan query 11:19:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:19:54 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:19:54 Message to Master queued w/err=0: serial=86180 error=0 11:19:59 Received message from Master: op=Filter serial=86181 11:19:59 Color wheel filter change from 0 to 0 11:19:59 FLIGetFilterPos err=0 currentPosition=0 11:19:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:59 Filter is already there-color wheel unchanged 11:20:00 Received message from Master: op=Shutter serial=86182 11:20:00 Shutter LASER close 11:20:00 Received message from Camera: op=State serial=86184 11:20:00 GetSingleValue result=40 Value=cccccccc 11:20:00 SkyScan query 11:20:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:20:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:00 Parameters OK 11:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:00 Set A/D data flow result=40 11:20:00 Set A/D channel type result=40 11:20:00 Set A/D encoding result=40 11:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:00 Set channel filter=0.000000e+000 result=40 11:20:00 Config A/D Result=40 11:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:00 Get A/D filter: -9.255963e+061 result=40 11:20:00 Get A/D value=-858993460 result=40 11:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:00 Parameters OK 11:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:00 Set A/D data flow result=40 11:20:00 Set A/D channel type result=40 11:20:00 Set A/D encoding result=40 11:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:00 Set channel filter=0.000000e+000 result=40 11:20:00 Config A/D Result=40 11:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:00 Get A/D filter: -9.255963e+061 result=40 11:20:00 Get A/D value=-858993460 result=40 11:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:00 Aux= 11:20:00 Message to Camera, serial 86184 queued 11:20:37 Received message from Master: op=PointingHead serial=86197 11:20:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:20:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:20:37 Point started: ret=0 11:20:37 point_skyscan result=0 11:20:38 Check angles 11:20:38 SkyScan query 11:20:39 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 11:20:39 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 11:20:39 Check angles 11:20:39 SkyScan query 11:20:39 SkyScan query done: ret=0 az=134.955<-8997 ze=6.495<-11567 Statuses=0009 0008 11:20:39 Msec=750 True Az=134.955 Ze=6.495 Az status=0009 Ze status=0008 11:20:40 Check angles 11:20:40 SkyScan query 11:20:40 SkyScan query done: ret=0 az=117.57<-7838 ze=6.495<-11567 Statuses=0009 0008 11:20:40 Msec=1500 True Az=117.57 Ze=6.495 Az status=0009 Ze status=0008 11:20:40 Check angles 11:20:40 SkyScan query 11:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:20:41 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:20:41 Message to Master queued w/err=0: serial=86197 error=0 11:20:46 Received message from Master: op=Filter serial=86198 11:20:46 Color wheel filter change from 0 to 0 11:20:46 FLIGetFilterPos err=0 currentPosition=0 11:20:46 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:46 Filter is already there-color wheel unchanged 11:20:46 Received message from Master: op=Shutter serial=86199 11:20:46 Shutter LASER close 11:20:46 Received message from Camera: op=State serial=86201 11:20:46 GetSingleValue result=40 Value=cccccccc 11:20:46 SkyScan query 11:20:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:20:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:47 Parameters OK 11:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:47 Set A/D data flow result=40 11:20:47 Set A/D channel type result=40 11:20:47 Set A/D encoding result=40 11:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:47 Set channel filter=0.000000e+000 result=40 11:20:47 Config A/D Result=40 11:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:47 Get A/D filter: -9.255963e+061 result=40 11:20:47 Get A/D value=-858993460 result=40 11:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:47 Parameters OK 11:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:47 Set A/D data flow result=40 11:20:47 Set A/D channel type result=40 11:20:47 Set A/D encoding result=40 11:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:47 Set channel filter=0.000000e+000 result=40 11:20:47 Config A/D Result=40 11:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:47 Get A/D filter: -9.255963e+061 result=40 11:20:47 Get A/D value=-858993460 result=40 11:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:47 Aux= 11:20:47 Message to Camera, serial 86201 queued 11:21:24 Received message from Master: op=PointingHead serial=86214 11:21:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:21:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:21:24 Point started: ret=0 11:21:24 point_skyscan result=0 11:21:25 Check angles 11:21:25 SkyScan query 11:21:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 11:21:25 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 11:21:25 Check angles 11:21:25 SkyScan query 11:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 11:21:26 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 11:21:26 Check angles 11:21:26 SkyScan query 11:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.06<-16404 Statuses=0008 0009 11:21:27 Msec=1500 True Az=112.995 Ze=-66.06 Az status=0008 Ze status=0009 11:21:27 Check angles 11:21:27 SkyScan query 11:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-87<-17800 Statuses=0008 0009 11:21:27 Msec=2250 True Az=112.995 Ze=-87 Az status=0008 Ze status=0009 11:21:28 Check angles 11:21:28 SkyScan query 11:21:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 11:21:28 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 11:21:28 Check angles 11:21:28 SkyScan query 11:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.91<-20594 Statuses=0008 0009 11:21:29 Msec=3750 True Az=112.995 Ze=-128.91 Az status=0008 Ze status=0009 11:21:29 Check angles 11:21:29 SkyScan query 11:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.85<-21990 Statuses=0008 0009 11:21:30 Msec=4500 True Az=112.995 Ze=-149.85 Az status=0008 Ze status=0009 11:21:30 Check angles 11:21:30 SkyScan query 11:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 11:21:30 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 11:21:31 Check angles 11:21:31 SkyScan query 11:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:21:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:21:31 Message to Master queued w/err=0: serial=86214 error=0 11:21:36 Received message from Master: op=Filter serial=86215 11:21:36 Color wheel filter change from 0 to 0 11:21:36 FLIGetFilterPos err=0 currentPosition=0 11:21:36 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:36 Filter is already there-color wheel unchanged 11:21:36 Received message from Master: op=Shutter serial=86216 11:21:36 Shutter LASER open 11:21:37 Received message from Camera: op=State serial=86218 11:21:37 GetSingleValue result=40 Value=cccccccc 11:21:37 SkyScan query 11:21:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:21:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:37 Parameters OK 11:21:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:37 Set A/D data flow result=40 11:21:37 Set A/D channel type result=40 11:21:37 Set A/D encoding result=40 11:21:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:37 Set channel filter=0.000000e+000 result=40 11:21:37 Config A/D Result=40 11:21:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:37 Get A/D filter: -9.255963e+061 result=40 11:21:37 Get A/D value=-858993460 result=40 11:21:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:37 Parameters OK 11:21:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:37 Set A/D data flow result=40 11:21:37 Set A/D channel type result=40 11:21:37 Set A/D encoding result=40 11:21:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:37 Set channel filter=0.000000e+000 result=40 11:21:37 Config A/D Result=40 11:21:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:37 Get A/D filter: -9.255963e+061 result=40 11:21:37 Get A/D value=-858993460 result=40 11:21:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:37 Aux= 11:21:37 Message to Camera, serial 86218 queued 11:21:46 Received message from Master: op=Shutter serial=86228 11:21:46 Shutter LASER close 11:21:46 Received message from Master: op=PointingHead serial=86232 11:21:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:21:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:21:46 Point started: ret=0 11:21:46 point_skyscan result=0 11:21:47 Check angles 11:21:47 SkyScan query 11:21:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 11:21:48 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 11:21:48 Check angles 11:21:48 SkyScan query 11:21:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.355<-20157 Statuses=0008 0009 11:21:48 Msec=750 True Az=112.995 Ze=-122.355 Az status=0008 Ze status=0009 11:21:49 Check angles 11:21:49 SkyScan query 11:21:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.4<-18760 Statuses=0008 0009 11:21:49 Msec=1500 True Az=112.995 Ze=-101.4 Az status=0008 Ze status=0009 11:21:49 Check angles 11:21:49 SkyScan query 11:21:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.43<-17362 Statuses=0008 0009 11:21:50 Msec=2250 True Az=112.995 Ze=-80.43 Az status=0008 Ze status=0009 11:21:50 Check angles 11:21:50 SkyScan query 11:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.475<-15965 Statuses=0008 0009 11:21:51 Msec=3000 True Az=112.995 Ze=-59.475 Az status=0008 Ze status=0009 11:21:51 Check angles 11:21:51 SkyScan query 11:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.52<-14568 Statuses=0008 0009 11:21:51 Msec=3750 True Az=112.995 Ze=-38.52 Az status=0008 Ze status=0009 11:21:52 Check angles 11:21:52 SkyScan query 11:21:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.565<-13171 Statuses=0008 0009 11:21:52 Msec=4500 True Az=112.995 Ze=-17.565 Az status=0008 Ze status=0009 11:21:52 Check angles 11:21:52 SkyScan query 11:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=3.39<-11774 Statuses=0008 0009 11:21:53 Msec=5250 True Az=112.995 Ze=3.39 Az status=0008 Ze status=0009 11:21:53 Check angles 11:21:53 SkyScan query 11:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:21:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:21:54 Message to Master queued w/err=0: serial=86232 error=0 11:21:59 Received message from Master: op=Filter serial=86233 11:21:59 Color wheel filter change from 0 to 0 11:21:59 FLIGetFilterPos err=0 currentPosition=0 11:21:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:59 Filter is already there-color wheel unchanged 11:21:59 Received message from Master: op=Shutter serial=86234 11:21:59 Shutter LASER close 11:21:59 Received message from Camera: op=State serial=86236 11:21:59 GetSingleValue result=40 Value=cccccccc 11:21:59 SkyScan query 11:22:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:22:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:00 Parameters OK 11:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:00 Set A/D data flow result=40 11:22:00 Set A/D channel type result=40 11:22:00 Set A/D encoding result=40 11:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:00 Set channel filter=0.000000e+000 result=40 11:22:00 Config A/D Result=40 11:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:00 Get A/D filter: -9.255963e+061 result=40 11:22:00 Get A/D value=-858993460 result=40 11:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:00 Parameters OK 11:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:00 Set A/D data flow result=40 11:22:00 Set A/D channel type result=40 11:22:00 Set A/D encoding result=40 11:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:00 Set channel filter=0.000000e+000 result=40 11:22:00 Config A/D Result=40 11:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:00 Get A/D filter: -9.255963e+061 result=40 11:22:00 Get A/D value=-858993460 result=40 11:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:00 Aux= 11:22:00 Message to Camera, serial 86236 queued 11:22:37 Received message from Master: op=PointingHead serial=86249 11:22:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:22:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:22:37 Point started: ret=0 11:22:37 point_skyscan result=0 11:22:38 Check angles 11:22:38 SkyScan query 11:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:22:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:22:39 Message to Master queued w/err=0: serial=86249 error=0 11:22:44 Received message from Master: op=Filter serial=86250 11:22:44 Color wheel filter change from 0 to 0 11:22:44 FLIGetFilterPos err=0 currentPosition=0 11:22:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:44 Filter is already there-color wheel unchanged 11:22:44 Received message from Master: op=Shutter serial=86251 11:22:44 Shutter LASER close 11:22:44 Received message from Camera: op=State serial=86253 11:22:44 GetSingleValue result=40 Value=cccccccc 11:22:44 SkyScan query 11:22:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:22:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:44 Parameters OK 11:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:44 Set A/D data flow result=40 11:22:44 Set A/D channel type result=40 11:22:44 Set A/D encoding result=40 11:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:44 Set channel filter=0.000000e+000 result=40 11:22:44 Config A/D Result=40 11:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:44 Get A/D filter: -9.255963e+061 result=40 11:22:44 Get A/D value=-858993460 result=40 11:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:44 Parameters OK 11:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:44 Set A/D data flow result=40 11:22:44 Set A/D channel type result=40 11:22:44 Set A/D encoding result=40 11:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:44 Set channel filter=0.000000e+000 result=40 11:22:44 Config A/D Result=40 11:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:44 Get A/D filter: -9.255963e+061 result=40 11:22:44 Get A/D value=-858993460 result=40 11:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:44 Aux= 11:22:44 Message to Camera, serial 86253 queued 11:23:21 Received message from Master: op=PointingHead serial=86266 11:23:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:23:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:23:21 Point started: ret=0 11:23:21 point_skyscan result=0 11:23:22 Check angles 11:23:22 SkyScan query 11:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:23:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:23:23 Message to Master queued w/err=0: serial=86266 error=0 11:23:28 Received message from Master: op=Filter serial=86267 11:23:28 Color wheel filter change from 0 to 0 11:23:28 FLIGetFilterPos err=0 currentPosition=0 11:23:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:28 Filter is already there-color wheel unchanged 11:23:28 Received message from Master: op=Shutter serial=86268 11:23:28 Shutter LASER close 11:23:28 Received message from Camera: op=State serial=86270 11:23:28 GetSingleValue result=40 Value=cccccccc 11:23:28 SkyScan query 11:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:23:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:29 Parameters OK 11:23:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:29 Set A/D data flow result=40 11:23:29 Set A/D channel type result=40 11:23:29 Set A/D encoding result=40 11:23:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:29 Set channel filter=0.000000e+000 result=40 11:23:29 Config A/D Result=40 11:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:29 Get A/D filter: -9.255963e+061 result=40 11:23:29 Get A/D value=-858993460 result=40 11:23:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:29 Parameters OK 11:23:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:29 Set A/D data flow result=40 11:23:29 Set A/D channel type result=40 11:23:29 Set A/D encoding result=40 11:23:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:29 Set channel filter=0.000000e+000 result=40 11:23:29 Config A/D Result=40 11:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:29 Get A/D filter: -9.255963e+061 result=40 11:23:29 Get A/D value=-858993460 result=40 11:23:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:29 Aux= 11:23:29 Message to Camera, serial 86270 queued [UTC 2019-3-3 11:23:50] 11:24:06 Received message from Master: op=PointingHead serial=86283 11:24:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:24:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:24:06 Point started: ret=0 11:24:06 point_skyscan result=0 11:24:07 Check angles 11:24:07 SkyScan query 11:24:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:24:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:24:07 Message to Master queued w/err=0: serial=86283 error=0 11:24:12 Received message from Master: op=Filter serial=86284 11:24:12 Color wheel filter change from 0 to 0 11:24:12 FLIGetFilterPos err=0 currentPosition=0 11:24:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:12 Filter is already there-color wheel unchanged 11:24:12 Received message from Master: op=Shutter serial=86285 11:24:12 Shutter LASER close 11:24:12 Received message from Camera: op=State serial=86287 11:24:12 GetSingleValue result=40 Value=cccccccc 11:24:12 SkyScan query 11:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:24:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:13 Parameters OK 11:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:13 Set A/D data flow result=40 11:24:13 Set A/D channel type result=40 11:24:13 Set A/D encoding result=40 11:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:13 Set channel filter=0.000000e+000 result=40 11:24:13 Config A/D Result=40 11:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:13 Get A/D filter: -9.255963e+061 result=40 11:24:13 Get A/D value=-858993460 result=40 11:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:13 Parameters OK 11:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:13 Set A/D data flow result=40 11:24:13 Set A/D channel type result=40 11:24:13 Set A/D encoding result=40 11:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:13 Set channel filter=0.000000e+000 result=40 11:24:13 Config A/D Result=40 11:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:13 Get A/D filter: -9.255963e+061 result=40 11:24:13 Get A/D value=-858993460 result=40 11:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:13 Aux= 11:24:13 Message to Camera, serial 86287 queued 11:24:50 Received message from Master: op=PointingHead serial=86300 11:24:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:24:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:24:50 Point started: ret=0 11:24:50 point_skyscan result=0 11:24:51 Check angles 11:24:51 SkyScan query 11:24:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 11:24:51 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 11:24:52 Check angles 11:24:52 SkyScan query 11:24:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.98<-14932 Statuses=0008 0009 11:24:52 Msec=750 True Az=112.995 Ze=-43.98 Az status=0008 Ze status=0009 11:24:52 Check angles 11:24:52 SkyScan query 11:24:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 11:24:53 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 11:24:53 Check angles 11:24:53 SkyScan query 11:24:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.905<-17727 Statuses=0008 0009 11:24:54 Msec=2250 True Az=112.995 Ze=-85.905 Az status=0008 Ze status=0009 11:24:54 Check angles 11:24:54 SkyScan query 11:24:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 11:24:54 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 11:24:55 Check angles 11:24:55 SkyScan query 11:24:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.25<-20550 Statuses=0008 0009 11:24:55 Msec=3750 True Az=112.995 Ze=-128.25 Az status=0008 Ze status=0009 11:24:55 Check angles 11:24:55 SkyScan query 11:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.205<-21947 Statuses=0008 0009 11:24:56 Msec=4500 True Az=112.995 Ze=-149.205 Az status=0008 Ze status=0009 11:24:56 Check angles 11:24:56 SkyScan query 11:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 11:24:57 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 11:24:57 Check angles 11:24:57 SkyScan query 11:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:24:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:24:58 Message to Master queued w/err=0: serial=86300 error=0 11:25:03 Received message from Master: op=Filter serial=86301 11:25:03 Color wheel filter change from 0 to 0 11:25:03 FLIGetFilterPos err=0 currentPosition=0 11:25:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:03 Filter is already there-color wheel unchanged 11:25:03 Received message from Master: op=Shutter serial=86302 11:25:03 Shutter LASER open 11:25:03 Received message from Camera: op=State serial=86304 11:25:03 GetSingleValue result=40 Value=cccccccc 11:25:03 SkyScan query 11:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:25:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:03 Parameters OK 11:25:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:03 Set A/D data flow result=40 11:25:03 Set A/D channel type result=40 11:25:03 Set A/D encoding result=40 11:25:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:03 Set channel filter=0.000000e+000 result=40 11:25:03 Config A/D Result=40 11:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:03 Get A/D filter: -9.255963e+061 result=40 11:25:03 Get A/D value=-858993460 result=40 11:25:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:03 Parameters OK 11:25:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:03 Set A/D data flow result=40 11:25:03 Set A/D channel type result=40 11:25:03 Set A/D encoding result=40 11:25:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:03 Set channel filter=0.000000e+000 result=40 11:25:03 Config A/D Result=40 11:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:03 Get A/D filter: -9.255963e+061 result=40 11:25:03 Get A/D value=-858993460 result=40 11:25:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:03 Aux= 11:25:03 Message to Camera, serial 86304 queued 11:25:12 Received message from Master: op=Shutter serial=86314 11:25:12 Shutter LASER close 11:25:12 Received message from Master: op=PointingHead serial=86318 11:25:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:25:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:25:13 Point started: ret=0 11:25:13 point_skyscan result=0 11:25:14 Check angles 11:25:14 SkyScan query 11:25:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 11:25:14 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 11:25:14 Check angles 11:25:14 SkyScan query 11:25:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 11:25:15 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 11:25:15 Check angles 11:25:15 SkyScan query 11:25:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.71<-18714 Statuses=0008 0009 11:25:16 Msec=1500 True Az=112.995 Ze=-100.71 Az status=0008 Ze status=0009 11:25:16 Check angles 11:25:16 SkyScan query 11:25:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.755<-17317 Statuses=0008 0009 11:25:16 Msec=2250 True Az=112.995 Ze=-79.755 Az status=0008 Ze status=0009 11:25:17 Check angles 11:25:17 SkyScan query 11:25:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.815<-15921 Statuses=0008 0009 11:25:17 Msec=3000 True Az=112.995 Ze=-58.815 Az status=0008 Ze status=0009 11:25:17 Check angles 11:25:17 SkyScan query 11:25:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 11:25:18 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 11:25:18 Check angles 11:25:18 SkyScan query 11:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 11:25:19 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 11:25:19 Check angles 11:25:19 SkyScan query 11:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=4.425<-11705 Statuses=0008 0009 11:25:19 Msec=5250 True Az=112.995 Ze=4.425 Az status=0008 Ze status=0009 11:25:20 Check angles 11:25:20 SkyScan query 11:25:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:25:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:25:20 Message to Master queued w/err=0: serial=86318 error=0 11:25:25 Received message from Master: op=Filter serial=86319 11:25:25 Color wheel filter change from 0 to 0 11:25:25 FLIGetFilterPos err=0 currentPosition=0 11:25:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:25 Filter is already there-color wheel unchanged 11:25:25 Received message from Master: op=Shutter serial=86320 11:25:25 Shutter LASER close 11:25:26 Received message from Camera: op=State serial=86322 11:25:26 GetSingleValue result=40 Value=cccccccc 11:25:26 SkyScan query 11:25:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:25:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:26 Parameters OK 11:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:26 Set A/D data flow result=40 11:25:26 Set A/D channel type result=40 11:25:26 Set A/D encoding result=40 11:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:26 Set channel filter=0.000000e+000 result=40 11:25:26 Config A/D Result=40 11:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:26 Get A/D filter: -9.255963e+061 result=40 11:25:26 Get A/D value=-858993460 result=40 11:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:26 Parameters OK 11:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:26 Set A/D data flow result=40 11:25:26 Set A/D channel type result=40 11:25:26 Set A/D encoding result=40 11:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:26 Set channel filter=0.000000e+000 result=40 11:25:26 Config A/D Result=40 11:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:26 Get A/D filter: -9.255963e+061 result=40 11:25:26 Get A/D value=-858993460 result=40 11:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:26 Aux= 11:25:26 Message to Camera, serial 86322 queued 11:26:03 Received message from Master: op=PointingHead serial=86335 11:26:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:26:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:26:03 Point started: ret=0 11:26:03 point_skyscan result=0 11:26:04 Check angles 11:26:04 SkyScan query 11:26:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:26:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:26:05 Message to Master queued w/err=0: serial=86335 error=0 11:26:10 Received message from Master: op=Filter serial=86336 11:26:10 Color wheel filter change from 0 to 0 11:26:10 FLIGetFilterPos err=0 currentPosition=0 11:26:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:10 Filter is already there-color wheel unchanged 11:26:10 Received message from Master: op=Shutter serial=86337 11:26:10 Shutter LASER close 11:26:10 Received message from Camera: op=State serial=86339 11:26:10 GetSingleValue result=40 Value=cccccccc 11:26:10 SkyScan query 11:26:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:26:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:10 Parameters OK 11:26:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:10 Set A/D data flow result=40 11:26:10 Set A/D channel type result=40 11:26:10 Set A/D encoding result=40 11:26:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:10 Set channel filter=0.000000e+000 result=40 11:26:10 Config A/D Result=40 11:26:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:10 Get A/D filter: -9.255963e+061 result=40 11:26:10 Get A/D value=-858993460 result=40 11:26:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:10 Parameters OK 11:26:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:10 Set A/D data flow result=40 11:26:10 Set A/D channel type result=40 11:26:10 Set A/D encoding result=40 11:26:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:10 Set channel filter=0.000000e+000 result=40 11:26:10 Config A/D Result=40 11:26:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:10 Get A/D filter: -9.255963e+061 result=40 11:26:10 Get A/D value=-858993460 result=40 11:26:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:10 Aux= 11:26:10 Message to Camera, serial 86339 queued 11:26:46 Received message from Master: op=PointingHead serial=86351 11:26:46 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:26:46 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:26:47 Point started: ret=0 11:26:47 point_skyscan result=0 11:26:47 Check angles 11:26:47 SkyScan query 11:26:48 SkyScan query done: ret=0 az=136.14<-9076 ze=-6.51<-12434 Statuses=0009 0008 11:26:48 Msec=0 True Az=136.14 Ze=-6.51 Az status=0009 Ze status=0008 11:26:48 Check angles 11:26:48 SkyScan query 11:26:49 SkyScan query done: ret=0 az=153.66<-10244 ze=-6.495<-12433 Statuses=0009 0008 11:26:49 Msec=750 True Az=153.66 Ze=-6.495 Az status=0009 Ze status=0008 11:26:49 Check angles 11:26:49 SkyScan query 11:26:49 SkyScan query done: ret=0 az=171.03<-11402 ze=-6.495<-12433 Statuses=0009 0008 11:26:49 Msec=1500 True Az=171.03 Ze=-6.495 Az status=0009 Ze status=0008 11:26:50 Check angles 11:26:50 SkyScan query 11:26:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:26:50 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:26:50 Message to Master queued w/err=0: serial=86351 error=0 11:26:55 Received message from Master: op=Filter serial=86352 11:26:55 Color wheel filter change from 0 to 0 11:26:55 FLIGetFilterPos err=0 currentPosition=0 11:26:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:55 Filter is already there-color wheel unchanged 11:26:55 Received message from Master: op=Shutter serial=86353 11:26:55 Shutter LASER close 11:26:55 Received message from Camera: op=State serial=86355 11:26:55 GetSingleValue result=40 Value=cccccccc 11:26:55 SkyScan query 11:26:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:26:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:56 Parameters OK 11:26:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:56 Set A/D data flow result=40 11:26:56 Set A/D channel type result=40 11:26:56 Set A/D encoding result=40 11:26:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:56 Set channel filter=0.000000e+000 result=40 11:26:56 Config A/D Result=40 11:26:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:56 Get A/D filter: -9.255963e+061 result=40 11:26:56 Get A/D value=-858993460 result=40 11:26:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:56 Parameters OK 11:26:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:56 Set A/D data flow result=40 11:26:56 Set A/D channel type result=40 11:26:56 Set A/D encoding result=40 11:26:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:56 Set channel filter=0.000000e+000 result=40 11:26:56 Config A/D Result=40 11:26:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:56 Get A/D filter: -9.255963e+061 result=40 11:26:56 Get A/D value=-858993460 result=40 11:26:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:56 Aux= 11:26:56 Message to Camera, serial 86355 queued 11:27:33 Received message from Master: op=PointingHead serial=86368 11:27:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:27:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:27:33 Point started: ret=0 11:27:33 point_skyscan result=0 11:27:34 Check angles 11:27:34 SkyScan query 11:27:34 SkyScan query done: ret=0 az=152.58<-10172 ze=6.51<-11566 Statuses=0009 0008 11:27:34 Msec=0 True Az=152.58 Ze=6.51 Az status=0009 Ze status=0008 11:27:35 Check angles 11:27:35 SkyScan query 11:27:35 SkyScan query done: ret=0 az=135.075<-9005 ze=6.495<-11567 Statuses=0009 0008 11:27:35 Msec=750 True Az=135.075 Ze=6.495 Az status=0009 Ze status=0008 11:27:35 Check angles 11:27:35 SkyScan query 11:27:36 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 11:27:36 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 11:27:36 Check angles 11:27:36 SkyScan query 11:27:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:27:37 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:27:37 Message to Master queued w/err=0: serial=86368 error=0 11:27:42 Received message from Master: op=Filter serial=86369 11:27:42 Color wheel filter change from 0 to 0 11:27:42 FLIGetFilterPos err=0 currentPosition=0 11:27:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:42 Filter is already there-color wheel unchanged 11:27:42 Received message from Master: op=Shutter serial=86370 11:27:42 Shutter LASER close 11:27:42 Received message from Camera: op=State serial=86372 11:27:42 GetSingleValue result=40 Value=cccccccc 11:27:42 SkyScan query 11:27:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:27:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:43 Parameters OK 11:27:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:43 Set A/D data flow result=40 11:27:43 Set A/D channel type result=40 11:27:43 Set A/D encoding result=40 11:27:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:43 Set channel filter=0.000000e+000 result=40 11:27:43 Config A/D Result=40 11:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:43 Get A/D filter: -9.255963e+061 result=40 11:27:43 Get A/D value=-858993460 result=40 11:27:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:43 Parameters OK 11:27:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:43 Set A/D data flow result=40 11:27:43 Set A/D channel type result=40 11:27:43 Set A/D encoding result=40 11:27:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:43 Set channel filter=0.000000e+000 result=40 11:27:43 Config A/D Result=40 11:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:43 Get A/D filter: -9.255963e+061 result=40 11:27:43 Get A/D value=-858993460 result=40 11:27:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:43 Aux= 11:27:43 Message to Camera, serial 86372 queued 11:28:19 Received message from Master: op=PointingHead serial=86385 11:28:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:28:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:28:20 Point started: ret=0 11:28:20 point_skyscan result=0 11:28:21 Check angles 11:28:21 SkyScan query 11:28:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.865<-13591 Statuses=0008 0009 11:28:21 Msec=0 True Az=112.995 Ze=-23.865 Az status=0008 Ze status=0009 11:28:21 Check angles 11:28:21 SkyScan query 11:28:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.805<-14987 Statuses=0008 0009 11:28:22 Msec=750 True Az=112.995 Ze=-44.805 Az status=0008 Ze status=0009 11:28:22 Check angles 11:28:22 SkyScan query 11:28:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.195<-16413 Statuses=0008 0009 11:28:23 Msec=1500 True Az=112.995 Ze=-66.195 Az status=0008 Ze status=0009 11:28:23 Check angles 11:28:23 SkyScan query 11:28:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.135<-17809 Statuses=0008 0009 11:28:23 Msec=2250 True Az=112.995 Ze=-87.135 Az status=0008 Ze status=0009 11:28:24 Check angles 11:28:24 SkyScan query 11:28:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 11:28:24 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 11:28:24 Check angles 11:28:24 SkyScan query 11:28:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.045<-20603 Statuses=0008 0009 11:28:25 Msec=3750 True Az=112.995 Ze=-129.045 Az status=0008 Ze status=0009 11:28:25 Check angles 11:28:25 SkyScan query 11:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.45<-22030 Statuses=0008 0009 11:28:26 Msec=4500 True Az=112.995 Ze=-150.45 Az status=0008 Ze status=0009 11:28:26 Check angles 11:28:26 SkyScan query 11:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0008 0009 11:28:26 Msec=5250 True Az=112.995 Ze=-171.21 Az status=0008 Ze status=0009 11:28:27 Check angles 11:28:27 SkyScan query 11:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:28:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:28:27 Message to Master queued w/err=0: serial=86385 error=0 11:28:32 Received message from Master: op=Filter serial=86386 11:28:32 Color wheel filter change from 0 to 0 11:28:32 FLIGetFilterPos err=0 currentPosition=0 11:28:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:32 Filter is already there-color wheel unchanged 11:28:32 Received message from Master: op=Shutter serial=86387 11:28:32 Shutter LASER open 11:28:32 Received message from Camera: op=State serial=86389 11:28:32 GetSingleValue result=40 Value=cccccccc 11:28:32 SkyScan query 11:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:28:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:33 Parameters OK 11:28:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:33 Set A/D data flow result=40 11:28:33 Set A/D channel type result=40 11:28:33 Set A/D encoding result=40 11:28:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:33 Set channel filter=0.000000e+000 result=40 11:28:33 Config A/D Result=40 11:28:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:33 Get A/D filter: -9.255963e+061 result=40 11:28:33 Get A/D value=-858993460 result=40 11:28:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:33 Parameters OK 11:28:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:33 Set A/D data flow result=40 11:28:33 Set A/D channel type result=40 11:28:33 Set A/D encoding result=40 11:28:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:33 Set channel filter=0.000000e+000 result=40 11:28:33 Config A/D Result=40 11:28:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:33 Get A/D filter: -9.255963e+061 result=40 11:28:33 Get A/D value=-858993460 result=40 11:28:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:33 Aux= 11:28:33 Message to Camera, serial 86389 queued 11:28:41 Received message from Master: op=Shutter serial=86399 11:28:41 Shutter LASER close 11:28:42 Received message from Master: op=PointingHead serial=86403 11:28:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:28:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:28:42 Point started: ret=0 11:28:42 point_skyscan result=0 11:28:43 Check angles 11:28:43 SkyScan query 11:28:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 11:28:44 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 11:28:44 Check angles 11:28:44 SkyScan query 11:28:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 11:28:44 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 11:28:45 Check angles 11:28:45 SkyScan query 11:28:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.68<-18712 Statuses=0008 0009 11:28:45 Msec=1500 True Az=112.995 Ze=-100.68 Az status=0008 Ze status=0009 11:28:45 Check angles 11:28:45 SkyScan query 11:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.725<-17315 Statuses=0008 0009 11:28:46 Msec=2250 True Az=112.995 Ze=-79.725 Az status=0008 Ze status=0009 11:28:46 Check angles 11:28:46 SkyScan query 11:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.785<-15919 Statuses=0008 0009 11:28:47 Msec=3000 True Az=112.995 Ze=-58.785 Az status=0008 Ze status=0009 11:28:47 Check angles 11:28:47 SkyScan query 11:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.815<-14521 Statuses=0008 0009 11:28:47 Msec=3750 True Az=112.995 Ze=-37.815 Az status=0008 Ze status=0009 11:28:48 Check angles 11:28:48 SkyScan query 11:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.86<-13124 Statuses=0008 0009 11:28:48 Msec=4500 True Az=112.995 Ze=-16.86 Az status=0008 Ze status=0009 11:28:48 Check angles 11:28:48 SkyScan query 11:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=4.455<-11703 Statuses=0008 0009 11:28:49 Msec=5250 True Az=112.995 Ze=4.455 Az status=0008 Ze status=0009 11:28:49 Check angles 11:28:49 SkyScan query 11:28:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:28:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:28:50 Message to Master queued w/err=0: serial=86403 error=0 11:28:55 Received message from Master: op=Filter serial=86404 11:28:55 Color wheel filter change from 0 to 0 11:28:55 FLIGetFilterPos err=0 currentPosition=0 11:28:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:55 Filter is already there-color wheel unchanged 11:28:55 Received message from Master: op=Shutter serial=86405 11:28:55 Shutter LASER close 11:28:55 Received message from Camera: op=State serial=86407 11:28:55 GetSingleValue result=40 Value=cccccccc 11:28:55 SkyScan query 11:28:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:28:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:56 Parameters OK 11:28:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:56 Set A/D data flow result=40 11:28:56 Set A/D channel type result=40 11:28:56 Set A/D encoding result=40 11:28:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:56 Set channel filter=0.000000e+000 result=40 11:28:56 Config A/D Result=40 11:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:56 Get A/D filter: -9.255963e+061 result=40 11:28:56 Get A/D value=-858993460 result=40 11:28:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:56 Parameters OK 11:28:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:56 Set A/D data flow result=40 11:28:56 Set A/D channel type result=40 11:28:56 Set A/D encoding result=40 11:28:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:56 Set channel filter=0.000000e+000 result=40 11:28:56 Config A/D Result=40 11:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:56 Get A/D filter: -9.255963e+061 result=40 11:28:56 Get A/D value=-858993460 result=40 11:28:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:56 Aux= 11:28:56 Message to Camera, serial 86407 queued 11:29:32 Received message from Master: op=PointingHead serial=86420 11:29:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:29:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:29:33 Point started: ret=0 11:29:33 point_skyscan result=0 11:29:33 Check angles 11:29:33 SkyScan query 11:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:29:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:29:34 Message to Master queued w/err=0: serial=86420 error=0 11:29:39 Received message from Master: op=Filter serial=86421 11:29:39 Color wheel filter change from 0 to 0 11:29:39 FLIGetFilterPos err=0 currentPosition=0 11:29:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:39 Filter is already there-color wheel unchanged 11:29:39 Received message from Master: op=Shutter serial=86422 11:29:39 Shutter LASER close 11:29:39 Received message from Camera: op=State serial=86424 11:29:39 GetSingleValue result=40 Value=cccccccc 11:29:39 SkyScan query 11:29:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:29:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:40 Parameters OK 11:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:40 Set A/D data flow result=40 11:29:40 Set A/D channel type result=40 11:29:40 Set A/D encoding result=40 11:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:40 Set channel filter=0.000000e+000 result=40 11:29:40 Config A/D Result=40 11:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:40 Get A/D filter: -9.255963e+061 result=40 11:29:40 Get A/D value=-858993460 result=40 11:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:40 Parameters OK 11:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:40 Set A/D data flow result=40 11:29:40 Set A/D channel type result=40 11:29:40 Set A/D encoding result=40 11:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:40 Set channel filter=0.000000e+000 result=40 11:29:40 Config A/D Result=40 11:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:40 Get A/D filter: -9.255963e+061 result=40 11:29:40 Get A/D value=-858993460 result=40 11:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:40 Aux= 11:29:40 Message to Camera, serial 86424 queued 11:30:17 Received message from Master: op=PointingHead serial=86437 11:30:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:30:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:30:17 Point started: ret=0 11:30:17 point_skyscan result=0 11:30:18 Check angles 11:30:18 SkyScan query 11:30:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:30:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:30:18 Message to Master queued w/err=0: serial=86437 error=0 11:30:23 Received message from Master: op=Filter serial=86438 11:30:23 Color wheel filter change from 0 to 0 11:30:23 FLIGetFilterPos err=0 currentPosition=0 11:30:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:23 Filter is already there-color wheel unchanged 11:30:23 Received message from Master: op=Shutter serial=86439 11:30:23 Shutter LASER close 11:30:24 Received message from Camera: op=State serial=86441 11:30:24 GetSingleValue result=40 Value=cccccccc 11:30:24 SkyScan query 11:30:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:30:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:24 Parameters OK 11:30:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:24 Set A/D data flow result=40 11:30:24 Set A/D channel type result=40 11:30:24 Set A/D encoding result=40 11:30:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:24 Set channel filter=0.000000e+000 result=40 11:30:24 Config A/D Result=40 11:30:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:24 Get A/D filter: -9.255963e+061 result=40 11:30:24 Get A/D value=-858993460 result=40 11:30:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:24 Parameters OK 11:30:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:24 Set A/D data flow result=40 11:30:24 Set A/D channel type result=40 11:30:24 Set A/D encoding result=40 11:30:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:24 Set channel filter=0.000000e+000 result=40 11:30:24 Config A/D Result=40 11:30:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:24 Get A/D filter: -9.255963e+061 result=40 11:30:24 Get A/D value=-858993460 result=40 11:30:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:24 Aux= 11:30:24 Message to Camera, serial 86441 queued 11:31:01 Received message from Master: op=PointingHead serial=86454 11:31:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:31:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:31:01 Point started: ret=0 11:31:01 point_skyscan result=0 11:31:02 Check angles 11:31:02 SkyScan query 11:31:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:31:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:31:03 Message to Master queued w/err=0: serial=86454 error=0 11:31:08 Received message from Master: op=Filter serial=86455 11:31:08 Color wheel filter change from 0 to 0 11:31:08 FLIGetFilterPos err=0 currentPosition=0 11:31:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:08 Filter is already there-color wheel unchanged 11:31:08 Received message from Master: op=Shutter serial=86456 11:31:08 Shutter LASER close 11:31:08 Received message from Camera: op=State serial=86458 11:31:08 GetSingleValue result=40 Value=cccccccc 11:31:08 SkyScan query 11:31:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:31:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:08 Parameters OK 11:31:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:08 Set A/D data flow result=40 11:31:08 Set A/D channel type result=40 11:31:08 Set A/D encoding result=40 11:31:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:08 Set channel filter=0.000000e+000 result=40 11:31:08 Config A/D Result=40 11:31:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:08 Get A/D filter: -9.255963e+061 result=40 11:31:08 Get A/D value=-858993460 result=40 11:31:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:08 Parameters OK 11:31:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:08 Set A/D data flow result=40 11:31:08 Set A/D channel type result=40 11:31:08 Set A/D encoding result=40 11:31:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:08 Set channel filter=0.000000e+000 result=40 11:31:08 Config A/D Result=40 11:31:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:08 Get A/D filter: -9.255963e+061 result=40 11:31:08 Get A/D value=-858993460 result=40 11:31:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:08 Aux= 11:31:08 Message to Camera, serial 86458 queued 11:31:45 Received message from Master: op=PointingHead serial=86471 11:31:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:31:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:31:46 Point started: ret=0 11:31:46 point_skyscan result=0 11:31:46 Check angles 11:31:46 SkyScan query 11:31:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 11:31:47 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 11:31:47 Check angles 11:31:47 SkyScan query 11:31:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 11:31:48 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 11:31:48 Check angles 11:31:48 SkyScan query 11:31:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 11:31:48 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 11:31:49 Check angles 11:31:49 SkyScan query 11:31:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.79<-17786 Statuses=0008 0009 11:31:49 Msec=2250 True Az=112.995 Ze=-86.79 Az status=0008 Ze status=0009 11:31:49 Check angles 11:31:49 SkyScan query 11:31:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.76<-19184 Statuses=0008 0009 11:31:50 Msec=3000 True Az=112.995 Ze=-107.76 Az status=0008 Ze status=0009 11:31:50 Check angles 11:31:50 SkyScan query 11:31:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.685<-20579 Statuses=0008 0009 11:31:51 Msec=3750 True Az=112.995 Ze=-128.685 Az status=0008 Ze status=0009 11:31:51 Check angles 11:31:51 SkyScan query 11:31:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 11:31:51 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 11:31:52 Check angles 11:31:52 SkyScan query 11:31:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 11:31:52 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 11:31:52 Check angles 11:31:52 SkyScan query 11:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:31:53 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:31:53 Message to Master queued w/err=0: serial=86471 error=0 11:31:58 Received message from Master: op=Filter serial=86472 11:31:58 Color wheel filter change from 0 to 0 11:31:58 FLIGetFilterPos err=0 currentPosition=0 11:31:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:58 Filter is already there-color wheel unchanged 11:31:58 Received message from Master: op=Shutter serial=86473 11:31:58 Shutter LASER open 11:31:58 Received message from Camera: op=State serial=86475 11:31:58 GetSingleValue result=40 Value=cccccccc 11:31:58 SkyScan query 11:31:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:31:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:59 Parameters OK 11:31:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:59 Set A/D data flow result=40 11:31:59 Set A/D channel type result=40 11:31:59 Set A/D encoding result=40 11:31:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:59 Set channel filter=0.000000e+000 result=40 11:31:59 Config A/D Result=40 11:31:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:59 Get A/D filter: -9.255963e+061 result=40 11:31:59 Get A/D value=-858993460 result=40 11:31:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:59 Parameters OK 11:31:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:59 Set A/D data flow result=40 11:31:59 Set A/D channel type result=40 11:31:59 Set A/D encoding result=40 11:31:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:59 Set channel filter=0.000000e+000 result=40 11:31:59 Config A/D Result=40 11:31:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:59 Get A/D filter: -9.255963e+061 result=40 11:31:59 Get A/D value=-858993460 result=40 11:31:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:59 Aux= 11:31:59 Message to Camera, serial 86475 queued 11:32:07 Received message from Master: op=Shutter serial=86485 11:32:07 Shutter LASER close 11:32:08 Received message from Master: op=PointingHead serial=86489 11:32:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:32:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:32:08 Point started: ret=0 11:32:08 point_skyscan result=0 11:32:09 Check angles 11:32:09 SkyScan query 11:32:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 11:32:10 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 11:32:10 Check angles 11:32:10 SkyScan query 11:32:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 11:32:10 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 11:32:10 Check angles 11:32:10 SkyScan query 11:32:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 11:32:11 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 11:32:11 Check angles 11:32:11 SkyScan query 11:32:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 11:32:12 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 11:32:12 Check angles 11:32:12 SkyScan query 11:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 11:32:13 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 11:32:13 Check angles 11:32:13 SkyScan query 11:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 11:32:13 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 11:32:13 Check angles 11:32:13 SkyScan query 11:32:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 11:32:14 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 11:32:14 Check angles 11:32:14 SkyScan query 11:32:15 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 11:32:15 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 11:32:15 Check angles 11:32:15 SkyScan query 11:32:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:32:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:32:16 Message to Master queued w/err=0: serial=86489 error=0 11:32:21 Received message from Master: op=Filter serial=86490 11:32:21 Color wheel filter change from 0 to 0 11:32:21 FLIGetFilterPos err=0 currentPosition=0 11:32:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:21 Filter is already there-color wheel unchanged 11:32:21 Received message from Master: op=Shutter serial=86491 11:32:21 Shutter LASER close 11:32:21 Received message from Camera: op=State serial=86493 11:32:21 GetSingleValue result=40 Value=cccccccc 11:32:21 SkyScan query 11:32:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:32:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:21 Parameters OK 11:32:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:21 Set A/D data flow result=40 11:32:21 Set A/D channel type result=40 11:32:21 Set A/D encoding result=40 11:32:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:21 Set channel filter=0.000000e+000 result=40 11:32:21 Config A/D Result=40 11:32:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:21 Get A/D filter: -9.255963e+061 result=40 11:32:21 Get A/D value=-858993460 result=40 11:32:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:21 Parameters OK 11:32:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:21 Set A/D data flow result=40 11:32:21 Set A/D channel type result=40 11:32:21 Set A/D encoding result=40 11:32:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:21 Set channel filter=0.000000e+000 result=40 11:32:21 Config A/D Result=40 11:32:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:21 Get A/D filter: -9.255963e+061 result=40 11:32:21 Get A/D value=-858993460 result=40 11:32:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:21 Aux= 11:32:21 Message to Camera, serial 86493 queued 11:32:57 Received message from Master: op=PointingHead serial=86505 11:32:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:32:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:32:58 Point started: ret=0 11:32:58 point_skyscan result=0 11:32:58 Check angles 11:32:58 SkyScan query 11:32:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:32:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:32:59 Message to Master queued w/err=0: serial=86505 error=0 11:33:04 Received message from Master: op=Filter serial=86506 11:33:04 Color wheel filter change from 0 to 0 11:33:04 FLIGetFilterPos err=0 currentPosition=0 11:33:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:04 Filter is already there-color wheel unchanged 11:33:04 Received message from Master: op=Shutter serial=86507 11:33:04 Shutter LASER close 11:33:04 Received message from Camera: op=State serial=86509 11:33:04 GetSingleValue result=40 Value=cccccccc 11:33:04 SkyScan query 11:33:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:33:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:05 Parameters OK 11:33:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:05 Set A/D data flow result=40 11:33:05 Set A/D channel type result=40 11:33:05 Set A/D encoding result=40 11:33:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:05 Set channel filter=0.000000e+000 result=40 11:33:05 Config A/D Result=40 11:33:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:05 Get A/D filter: -9.255963e+061 result=40 11:33:05 Get A/D value=-858993460 result=40 11:33:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:05 Parameters OK 11:33:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:05 Set A/D data flow result=40 11:33:05 Set A/D channel type result=40 11:33:05 Set A/D encoding result=40 11:33:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:05 Set channel filter=0.000000e+000 result=40 11:33:05 Config A/D Result=40 11:33:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:05 Get A/D filter: -9.255963e+061 result=40 11:33:05 Get A/D value=-858993460 result=40 11:33:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:05 Aux= 11:33:05 Message to Camera, serial 86509 queued 11:33:38 Received message from Master: op=Identify serial=86515 11:33:42 Received message from Master: op=PointingHead serial=86525 11:33:42 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:33:42 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:33:42 Point started: ret=0 11:33:42 point_skyscan result=0 11:33:43 Check angles 11:33:43 SkyScan query 11:33:43 SkyScan query done: ret=0 az=135.87<-9058 ze=-6.51<-12434 Statuses=0009 0008 11:33:43 Msec=0 True Az=135.87 Ze=-6.51 Az status=0009 Ze status=0008 11:33:44 Check angles 11:33:44 SkyScan query 11:33:44 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 11:33:44 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 11:33:44 Check angles 11:33:44 SkyScan query 11:33:45 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.495<-12433 Statuses=0009 0008 11:33:45 Msec=1500 True Az=171.15 Ze=-6.495 Az status=0009 Ze status=0008 11:33:45 Check angles 11:33:45 SkyScan query 11:33:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:33:46 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:33:46 Message to Master queued w/err=0: serial=86525 error=0 11:33:51 Received message from Master: op=Filter serial=86526 11:33:51 Color wheel filter change from 0 to 0 11:33:51 FLIGetFilterPos err=0 currentPosition=0 11:33:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:51 Filter is already there-color wheel unchanged 11:33:51 Received message from Master: op=Shutter serial=86527 11:33:51 Shutter LASER close 11:33:51 Received message from Camera: op=State serial=86529 11:33:51 GetSingleValue result=40 Value=cccccccc 11:33:51 SkyScan query 11:33:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:33:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:51 Parameters OK 11:33:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:51 Set A/D data flow result=40 11:33:51 Set A/D channel type result=40 11:33:51 Set A/D encoding result=40 11:33:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:51 Set channel filter=0.000000e+000 result=40 11:33:51 Config A/D Result=40 11:33:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:51 Get A/D filter: -9.255963e+061 result=40 11:33:51 Get A/D value=-858993460 result=40 11:33:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:51 Parameters OK 11:33:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:51 Set A/D data flow result=40 11:33:51 Set A/D channel type result=40 11:33:51 Set A/D encoding result=40 11:33:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:51 Set channel filter=0.000000e+000 result=40 11:33:51 Config A/D Result=40 11:33:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:51 Get A/D filter: -9.255963e+061 result=40 11:33:51 Get A/D value=-858993460 result=40 11:33:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:51 Aux= [UTC 2019-3-3 11:33:51] 11:33:51 Message to Camera, serial 86529 queued 11:34:28 Received message from Master: op=PointingHead serial=86542 11:34:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:34:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:34:29 Point started: ret=0 11:34:29 point_skyscan result=0 11:34:29 Check angles 11:34:29 SkyScan query 11:34:30 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 11:34:30 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 11:34:30 Check angles 11:34:30 SkyScan query 11:34:31 SkyScan query done: ret=0 az=135<-9000 ze=6.495<-11567 Statuses=0009 0008 11:34:31 Msec=750 True Az=135 Ze=6.495 Az status=0009 Ze status=0008 11:34:31 Check angles 11:34:31 SkyScan query 11:34:31 SkyScan query done: ret=0 az=117.51<-7834 ze=6.495<-11567 Statuses=0009 0008 11:34:31 Msec=1500 True Az=117.51 Ze=6.495 Az status=0009 Ze status=0008 11:34:32 Check angles 11:34:32 SkyScan query 11:34:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:34:32 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:34:32 Message to Master queued w/err=0: serial=86542 error=0 11:34:37 Received message from Master: op=Filter serial=86543 11:34:37 Color wheel filter change from 0 to 0 11:34:37 FLIGetFilterPos err=0 currentPosition=0 11:34:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:37 Filter is already there-color wheel unchanged 11:34:37 Received message from Master: op=Shutter serial=86544 11:34:37 Shutter LASER close 11:34:37 Received message from Camera: op=State serial=86546 11:34:37 GetSingleValue result=40 Value=cccccccc 11:34:37 SkyScan query 11:34:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:34:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:38 Parameters OK 11:34:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:38 Set A/D data flow result=40 11:34:38 Set A/D channel type result=40 11:34:38 Set A/D encoding result=40 11:34:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:38 Set channel filter=0.000000e+000 result=40 11:34:38 Config A/D Result=40 11:34:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:38 Get A/D filter: -9.255963e+061 result=40 11:34:38 Get A/D value=-858993460 result=40 11:34:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:38 Parameters OK 11:34:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:38 Set A/D data flow result=40 11:34:38 Set A/D channel type result=40 11:34:38 Set A/D encoding result=40 11:34:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:38 Set channel filter=0.000000e+000 result=40 11:34:38 Config A/D Result=40 11:34:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:38 Get A/D filter: -9.255963e+061 result=40 11:34:38 Get A/D value=-858993460 result=40 11:34:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:38 Aux= 11:34:38 Message to Camera, serial 86546 queued 11:35:15 Received message from Master: op=PointingHead serial=86559 11:35:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:35:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:35:15 Point started: ret=0 11:35:15 point_skyscan result=0 11:35:16 Check angles 11:35:16 SkyScan query 11:35:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 11:35:16 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 11:35:17 Check angles 11:35:17 SkyScan query 11:35:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 11:35:17 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 11:35:17 Check angles 11:35:17 SkyScan query 11:35:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.03<-16402 Statuses=0008 0009 11:35:18 Msec=1500 True Az=112.995 Ze=-66.03 Az status=0008 Ze status=0009 11:35:18 Check angles 11:35:18 SkyScan query 11:35:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.39<-17826 Statuses=0008 0009 11:35:19 Msec=2250 True Az=112.995 Ze=-87.39 Az status=0008 Ze status=0009 11:35:19 Check angles 11:35:19 SkyScan query 11:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.345<-19223 Statuses=0008 0009 11:35:20 Msec=3000 True Az=112.995 Ze=-108.345 Az status=0008 Ze status=0009 11:35:20 Check angles 11:35:20 SkyScan query 11:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.315<-20621 Statuses=0008 0009 11:35:20 Msec=3750 True Az=112.995 Ze=-129.315 Az status=0008 Ze status=0009 11:35:20 Check angles 11:35:20 SkyScan query 11:35:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.27<-22018 Statuses=0008 0009 11:35:21 Msec=4500 True Az=112.995 Ze=-150.27 Az status=0008 Ze status=0009 11:35:21 Check angles 11:35:21 SkyScan query 11:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 11:35:22 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 11:35:22 Check angles 11:35:22 SkyScan query 11:35:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:35:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:35:23 Message to Master queued w/err=0: serial=86559 error=0 11:35:28 Received message from Master: op=Filter serial=86560 11:35:28 Color wheel filter change from 0 to 0 11:35:28 FLIGetFilterPos err=0 currentPosition=0 11:35:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:28 Filter is already there-color wheel unchanged 11:35:28 Received message from Master: op=Shutter serial=86561 11:35:28 Shutter LASER open 11:35:28 Received message from Camera: op=State serial=86563 11:35:28 GetSingleValue result=40 Value=cccccccc 11:35:28 SkyScan query 11:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:35:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:28 Parameters OK 11:35:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:28 Set A/D data flow result=40 11:35:28 Set A/D channel type result=40 11:35:28 Set A/D encoding result=40 11:35:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:28 Set channel filter=0.000000e+000 result=40 11:35:28 Config A/D Result=40 11:35:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:28 Get A/D filter: -9.255963e+061 result=40 11:35:28 Get A/D value=-858993460 result=40 11:35:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:28 Parameters OK 11:35:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:28 Set A/D data flow result=40 11:35:28 Set A/D channel type result=40 11:35:28 Set A/D encoding result=40 11:35:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:28 Set channel filter=0.000000e+000 result=40 11:35:28 Config A/D Result=40 11:35:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:28 Get A/D filter: -9.255963e+061 result=40 11:35:28 Get A/D value=-858993460 result=40 11:35:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:28 Aux= 11:35:28 Message to Camera, serial 86563 queued 11:35:37 Received message from Master: op=Shutter serial=86573 11:35:37 Shutter LASER close 11:35:37 Received message from Master: op=PointingHead serial=86577 11:35:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:35:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:35:38 Point started: ret=0 11:35:38 point_skyscan result=0 11:35:38 Check angles 11:35:38 SkyScan query 11:35:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 11:35:39 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 11:35:39 Check angles 11:35:39 SkyScan query 11:35:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 11:35:40 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 11:35:40 Check angles 11:35:40 SkyScan query 11:35:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 11:35:41 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 11:35:41 Check angles 11:35:41 SkyScan query 11:35:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.115<-17341 Statuses=0008 0009 11:35:41 Msec=2250 True Az=112.995 Ze=-80.115 Az status=0008 Ze status=0009 11:35:41 Check angles 11:35:41 SkyScan query 11:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 11:35:42 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 11:35:42 Check angles 11:35:42 SkyScan query 11:35:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 11:35:43 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 11:35:43 Check angles 11:35:43 SkyScan query 11:35:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.25<-13150 Statuses=0008 0009 11:35:44 Msec=4500 True Az=112.995 Ze=-17.25 Az status=0008 Ze status=0009 11:35:44 Check angles 11:35:44 SkyScan query 11:35:44 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 11:35:44 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 11:35:44 Check angles 11:35:44 SkyScan query 11:35:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:35:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:35:45 Message to Master queued w/err=0: serial=86577 error=0 11:35:50 Received message from Master: op=Filter serial=86578 11:35:50 Color wheel filter change from 0 to 0 11:35:50 FLIGetFilterPos err=0 currentPosition=0 11:35:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:50 Filter is already there-color wheel unchanged 11:35:50 Received message from Master: op=Shutter serial=86579 11:35:50 Shutter LASER close 11:35:50 Received message from Camera: op=State serial=86581 11:35:50 GetSingleValue result=40 Value=cccccccc 11:35:50 SkyScan query 11:35:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:35:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:51 Parameters OK 11:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:51 Set A/D data flow result=40 11:35:51 Set A/D channel type result=40 11:35:51 Set A/D encoding result=40 11:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:51 Set channel filter=0.000000e+000 result=40 11:35:51 Config A/D Result=40 11:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:51 Get A/D filter: -9.255963e+061 result=40 11:35:51 Get A/D value=-858993460 result=40 11:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:51 Parameters OK 11:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:51 Set A/D data flow result=40 11:35:51 Set A/D channel type result=40 11:35:51 Set A/D encoding result=40 11:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:51 Set channel filter=0.000000e+000 result=40 11:35:51 Config A/D Result=40 11:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:51 Get A/D filter: -9.255963e+061 result=40 11:35:51 Get A/D value=-858993460 result=40 11:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:51 Aux= 11:35:51 Message to Camera, serial 86581 queued 11:36:28 Received message from Master: op=PointingHead serial=86594 11:36:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:36:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:36:28 Point started: ret=0 11:36:28 point_skyscan result=0 11:36:29 Check angles 11:36:29 SkyScan query 11:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:36:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:36:29 Message to Master queued w/err=0: serial=86594 error=0 11:36:34 Received message from Master: op=Filter serial=86595 11:36:34 Color wheel filter change from 0 to 0 11:36:34 FLIGetFilterPos err=0 currentPosition=0 11:36:34 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:34 Filter is already there-color wheel unchanged 11:36:35 Received message from Master: op=Shutter serial=86596 11:36:35 Shutter LASER close 11:36:35 Received message from Camera: op=State serial=86598 11:36:35 GetSingleValue result=40 Value=cccccccc 11:36:35 SkyScan query 11:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:36:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:35 Parameters OK 11:36:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:35 Set A/D data flow result=40 11:36:35 Set A/D channel type result=40 11:36:35 Set A/D encoding result=40 11:36:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:35 Set channel filter=0.000000e+000 result=40 11:36:35 Config A/D Result=40 11:36:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:35 Get A/D filter: -9.255963e+061 result=40 11:36:35 Get A/D value=-858993460 result=40 11:36:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:35 Parameters OK 11:36:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:35 Set A/D data flow result=40 11:36:35 Set A/D channel type result=40 11:36:35 Set A/D encoding result=40 11:36:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:35 Set channel filter=0.000000e+000 result=40 11:36:35 Config A/D Result=40 11:36:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:35 Get A/D filter: -9.255963e+061 result=40 11:36:35 Get A/D value=-858993460 result=40 11:36:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:35 Aux= 11:36:35 Message to Camera, serial 86598 queued 11:37:12 Received message from Master: op=PointingHead serial=86611 11:37:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:37:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:37:12 Point started: ret=0 11:37:12 point_skyscan result=0 11:37:13 Check angles 11:37:13 SkyScan query 11:37:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:37:14 Message to Master queued w/err=0: serial=86611 error=0 11:37:19 Received message from Master: op=Filter serial=86612 11:37:19 Color wheel filter change from 0 to 0 11:37:19 FLIGetFilterPos err=0 currentPosition=0 11:37:19 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:19 Filter is already there-color wheel unchanged 11:37:19 Received message from Master: op=Shutter serial=86613 11:37:19 Shutter LASER close 11:37:19 Received message from Camera: op=State serial=86615 11:37:19 GetSingleValue result=40 Value=cccccccc 11:37:19 SkyScan query 11:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:20 Parameters OK 11:37:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:20 Set A/D data flow result=40 11:37:20 Set A/D channel type result=40 11:37:20 Set A/D encoding result=40 11:37:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:20 Set channel filter=0.000000e+000 result=40 11:37:20 Config A/D Result=40 11:37:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:20 Get A/D filter: -9.255963e+061 result=40 11:37:20 Get A/D value=-858993460 result=40 11:37:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:20 Parameters OK 11:37:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:20 Set A/D data flow result=40 11:37:20 Set A/D channel type result=40 11:37:20 Set A/D encoding result=40 11:37:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:20 Set channel filter=0.000000e+000 result=40 11:37:20 Config A/D Result=40 11:37:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:20 Get A/D filter: -9.255963e+061 result=40 11:37:20 Get A/D value=-858993460 result=40 11:37:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:20 Aux= 11:37:20 Message to Camera, serial 86615 queued 11:37:55 Received message from Master: op=PointingHead serial=86627 11:37:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:37:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:37:56 Point started: ret=0 11:37:56 point_skyscan result=0 11:37:57 Check angles 11:37:57 SkyScan query 11:37:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:37:57 Message to Master queued w/err=0: serial=86627 error=0 11:38:02 Received message from Master: op=Filter serial=86628 11:38:02 Color wheel filter change from 0 to 0 11:38:02 FLIGetFilterPos err=0 currentPosition=0 11:38:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:02 Filter is already there-color wheel unchanged 11:38:02 Received message from Master: op=Shutter serial=86629 11:38:02 Shutter LASER close 11:38:02 Received message from Camera: op=State serial=86631 11:38:02 GetSingleValue result=40 Value=cccccccc 11:38:02 SkyScan query 11:38:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:38:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:03 Parameters OK 11:38:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:03 Set A/D data flow result=40 11:38:03 Set A/D channel type result=40 11:38:03 Set A/D encoding result=40 11:38:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:03 Set channel filter=0.000000e+000 result=40 11:38:03 Config A/D Result=40 11:38:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:03 Get A/D filter: -9.255963e+061 result=40 11:38:03 Get A/D value=-858993460 result=40 11:38:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:03 Parameters OK 11:38:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:03 Set A/D data flow result=40 11:38:03 Set A/D channel type result=40 11:38:03 Set A/D encoding result=40 11:38:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:03 Set channel filter=0.000000e+000 result=40 11:38:03 Config A/D Result=40 11:38:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:03 Get A/D filter: -9.255963e+061 result=40 11:38:03 Get A/D value=-858993460 result=40 11:38:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:03 Aux= 11:38:03 Message to Camera, serial 86631 queued 11:38:40 Received message from Master: op=PointingHead serial=86644 11:38:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:38:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:38:40 Point started: ret=0 11:38:40 point_skyscan result=0 11:38:41 Check angles 11:38:41 SkyScan query 11:38:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 11:38:41 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 11:38:42 Check angles 11:38:42 SkyScan query 11:38:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.98<-14932 Statuses=0008 0009 11:38:42 Msec=750 True Az=112.995 Ze=-43.98 Az status=0008 Ze status=0009 11:38:42 Check angles 11:38:42 SkyScan query 11:38:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.935<-16329 Statuses=0008 0009 11:38:43 Msec=1500 True Az=112.995 Ze=-64.935 Az status=0008 Ze status=0009 11:38:43 Check angles 11:38:43 SkyScan query 11:38:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 11:38:44 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 11:38:44 Check angles 11:38:44 SkyScan query 11:38:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.715<-19181 Statuses=0008 0009 11:38:44 Msec=3000 True Az=112.995 Ze=-107.715 Az status=0008 Ze status=0009 11:38:45 Check angles 11:38:45 SkyScan query 11:38:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 11:38:45 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 11:38:45 Check angles 11:38:45 SkyScan query 11:38:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.61<-21974 Statuses=0008 0009 11:38:46 Msec=4500 True Az=112.995 Ze=-149.61 Az status=0008 Ze status=0009 11:38:46 Check angles 11:38:46 SkyScan query 11:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.55<-23370 Statuses=0008 0009 11:38:47 Msec=5250 True Az=112.995 Ze=-170.55 Az status=0008 Ze status=0009 11:38:47 Check angles 11:38:47 SkyScan query 11:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:38:47 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:38:47 Message to Master queued w/err=0: serial=86644 error=0 11:38:52 Received message from Master: op=Filter serial=86645 11:38:52 Color wheel filter change from 0 to 0 11:38:52 FLIGetFilterPos err=0 currentPosition=0 11:38:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:52 Filter is already there-color wheel unchanged 11:38:53 Received message from Master: op=Shutter serial=86646 11:38:53 Shutter LASER open 11:38:53 Received message from Camera: op=State serial=86648 11:38:53 GetSingleValue result=40 Value=cccccccc 11:38:53 SkyScan query 11:38:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:38:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:53 Parameters OK 11:38:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:53 Set A/D data flow result=40 11:38:53 Set A/D channel type result=40 11:38:53 Set A/D encoding result=40 11:38:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:53 Set channel filter=0.000000e+000 result=40 11:38:53 Config A/D Result=40 11:38:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:53 Get A/D filter: -9.255963e+061 result=40 11:38:53 Get A/D value=-858993460 result=40 11:38:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:53 Parameters OK 11:38:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:53 Set A/D data flow result=40 11:38:53 Set A/D channel type result=40 11:38:53 Set A/D encoding result=40 11:38:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:53 Set channel filter=0.000000e+000 result=40 11:38:53 Config A/D Result=40 11:38:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:53 Get A/D filter: -9.255963e+061 result=40 11:38:53 Get A/D value=-858993460 result=40 11:38:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:53 Aux= 11:38:53 Message to Camera, serial 86648 queued 11:39:02 Received message from Master: op=Shutter serial=86658 11:39:02 Shutter LASER close 11:39:02 Received message from Master: op=PointingHead serial=86662 11:39:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:39:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:39:03 Point started: ret=0 11:39:03 point_skyscan result=0 11:39:04 Check angles 11:39:04 SkyScan query 11:39:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 11:39:04 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 11:39:04 Check angles 11:39:04 SkyScan query 11:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 11:39:05 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 11:39:05 Check angles 11:39:05 SkyScan query 11:39:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.95<-18730 Statuses=0008 0009 11:39:06 Msec=1500 True Az=112.995 Ze=-100.95 Az status=0008 Ze status=0009 11:39:06 Check angles 11:39:06 SkyScan query 11:39:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.545<-17303 Statuses=0008 0009 11:39:06 Msec=2250 True Az=112.995 Ze=-79.545 Az status=0008 Ze status=0009 11:39:07 Check angles 11:39:07 SkyScan query 11:39:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.59<-15906 Statuses=0008 0009 11:39:07 Msec=3000 True Az=112.995 Ze=-58.59 Az status=0008 Ze status=0009 11:39:07 Check angles 11:39:07 SkyScan query 11:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.65<-14510 Statuses=0008 0009 11:39:08 Msec=3750 True Az=112.995 Ze=-37.65 Az status=0008 Ze status=0009 11:39:08 Check angles 11:39:08 SkyScan query 11:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.695<-13113 Statuses=0008 0009 11:39:09 Msec=4500 True Az=112.995 Ze=-16.695 Az status=0008 Ze status=0009 11:39:09 Check angles 11:39:09 SkyScan query 11:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=4.23<-11718 Statuses=0008 0009 11:39:09 Msec=5250 True Az=112.995 Ze=4.23 Az status=0008 Ze status=0009 11:39:10 Check angles 11:39:10 SkyScan query 11:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:39:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:39:10 Message to Master queued w/err=0: serial=86662 error=0 11:39:15 Received message from Master: op=Filter serial=86663 11:39:15 Color wheel filter change from 0 to 0 11:39:15 FLIGetFilterPos err=0 currentPosition=0 11:39:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:15 Filter is already there-color wheel unchanged 11:39:15 Received message from Master: op=Shutter serial=86664 11:39:15 Shutter LASER close 11:39:15 Received message from Camera: op=State serial=86666 11:39:15 GetSingleValue result=40 Value=cccccccc 11:39:15 SkyScan query 11:39:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:39:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:16 Parameters OK 11:39:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:16 Set A/D data flow result=40 11:39:16 Set A/D channel type result=40 11:39:16 Set A/D encoding result=40 11:39:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:16 Set channel filter=0.000000e+000 result=40 11:39:16 Config A/D Result=40 11:39:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:16 Get A/D filter: -9.255963e+061 result=40 11:39:16 Get A/D value=-858993460 result=40 11:39:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:16 Parameters OK 11:39:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:16 Set A/D data flow result=40 11:39:16 Set A/D channel type result=40 11:39:16 Set A/D encoding result=40 11:39:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:16 Set channel filter=0.000000e+000 result=40 11:39:16 Config A/D Result=40 11:39:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:16 Get A/D filter: -9.255963e+061 result=40 11:39:16 Get A/D value=-858993460 result=40 11:39:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:16 Aux= 11:39:16 Message to Camera, serial 86666 queued 11:39:53 Received message from Master: op=PointingHead serial=86679 11:39:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:39:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:39:53 Point started: ret=0 11:39:53 point_skyscan result=0 11:39:54 Check angles 11:39:54 SkyScan query 11:39:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:39:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:39:55 Message to Master queued w/err=0: serial=86679 error=0 11:40:00 Received message from Master: op=Filter serial=86680 11:40:00 Color wheel filter change from 0 to 0 11:40:00 FLIGetFilterPos err=0 currentPosition=0 11:40:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:00 Filter is already there-color wheel unchanged 11:40:00 Received message from Master: op=Shutter serial=86681 11:40:00 Shutter LASER close 11:40:00 Received message from Camera: op=State serial=86683 11:40:00 GetSingleValue result=40 Value=cccccccc 11:40:00 SkyScan query 11:40:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:40:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:00 Parameters OK 11:40:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:00 Set A/D data flow result=40 11:40:00 Set A/D channel type result=40 11:40:00 Set A/D encoding result=40 11:40:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:00 Set channel filter=0.000000e+000 result=40 11:40:00 Config A/D Result=40 11:40:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:00 Get A/D filter: -9.255963e+061 result=40 11:40:00 Get A/D value=-858993460 result=40 11:40:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:00 Parameters OK 11:40:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:00 Set A/D data flow result=40 11:40:00 Set A/D channel type result=40 11:40:00 Set A/D encoding result=40 11:40:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:00 Set channel filter=0.000000e+000 result=40 11:40:00 Config A/D Result=40 11:40:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:00 Get A/D filter: -9.255963e+061 result=40 11:40:00 Get A/D value=-858993460 result=40 11:40:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:00 Aux= 11:40:00 Message to Camera, serial 86683 queued 11:40:37 Received message from Master: op=PointingHead serial=86696 11:40:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:40:37 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:40:37 Point started: ret=0 11:40:37 point_skyscan result=0 11:40:38 Check angles 11:40:38 SkyScan query 11:40:39 SkyScan query done: ret=0 az=135.795<-9053 ze=-6.51<-12434 Statuses=0009 0008 11:40:39 Msec=0 True Az=135.795 Ze=-6.51 Az status=0009 Ze status=0008 11:40:39 Check angles 11:40:39 SkyScan query 11:40:40 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.495<-12433 Statuses=0009 0008 11:40:40 Msec=750 True Az=153.345 Ze=-6.495 Az status=0009 Ze status=0008 11:40:40 Check angles 11:40:40 SkyScan query 11:40:40 SkyScan query done: ret=0 az=170.82<-11388 ze=-6.495<-12433 Statuses=0009 0008 11:40:40 Msec=1500 True Az=170.82 Ze=-6.495 Az status=0009 Ze status=0008 11:40:40 Check angles 11:40:40 SkyScan query 11:40:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:40:41 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:40:41 Message to Master queued w/err=0: serial=86696 error=0 11:40:46 Received message from Master: op=Filter serial=86697 11:40:46 Color wheel filter change from 0 to 0 11:40:46 FLIGetFilterPos err=0 currentPosition=0 11:40:46 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:46 Filter is already there-color wheel unchanged 11:40:46 Received message from Master: op=Shutter serial=86698 11:40:46 Shutter LASER close 11:40:46 Received message from Camera: op=State serial=86700 11:40:46 GetSingleValue result=40 Value=cccccccc 11:40:46 SkyScan query 11:40:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:40:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:47 Parameters OK 11:40:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:47 Set A/D data flow result=40 11:40:47 Set A/D channel type result=40 11:40:47 Set A/D encoding result=40 11:40:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:47 Set channel filter=0.000000e+000 result=40 11:40:47 Config A/D Result=40 11:40:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:47 Get A/D filter: -9.255963e+061 result=40 11:40:47 Get A/D value=-858993460 result=40 11:40:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:47 Parameters OK 11:40:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:47 Set A/D data flow result=40 11:40:47 Set A/D channel type result=40 11:40:47 Set A/D encoding result=40 11:40:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:47 Set channel filter=0.000000e+000 result=40 11:40:47 Config A/D Result=40 11:40:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:47 Get A/D filter: -9.255963e+061 result=40 11:40:47 Get A/D value=-858993460 result=40 11:40:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:47 Aux= 11:40:47 Message to Camera, serial 86700 queued 11:41:24 Received message from Master: op=PointingHead serial=86713 11:41:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:41:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:41:24 Point started: ret=0 11:41:24 point_skyscan result=0 11:41:25 Check angles 11:41:25 SkyScan query 11:41:25 SkyScan query done: ret=0 az=152.805<-10187 ze=6.51<-11566 Statuses=0009 0008 11:41:25 Msec=0 True Az=152.805 Ze=6.51 Az status=0009 Ze status=0008 11:41:26 Check angles 11:41:26 SkyScan query 11:41:26 SkyScan query done: ret=0 az=134.97<-8998 ze=6.495<-11567 Statuses=0009 0008 11:41:26 Msec=750 True Az=134.97 Ze=6.495 Az status=0009 Ze status=0008 11:41:26 Check angles 11:41:26 SkyScan query 11:41:27 SkyScan query done: ret=0 az=117.54<-7836 ze=6.495<-11567 Statuses=0009 0008 11:41:27 Msec=1500 True Az=117.54 Ze=6.495 Az status=0009 Ze status=0008 11:41:27 Check angles 11:41:27 SkyScan query 11:41:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:41:28 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:41:28 Message to Master queued w/err=0: serial=86713 error=0 11:41:33 Received message from Master: op=Filter serial=86714 11:41:33 Color wheel filter change from 0 to 0 11:41:33 FLIGetFilterPos err=0 currentPosition=0 11:41:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:33 Filter is already there-color wheel unchanged 11:41:33 Received message from Master: op=Shutter serial=86715 11:41:33 Shutter LASER close 11:41:33 Received message from Camera: op=State serial=86717 11:41:33 GetSingleValue result=40 Value=cccccccc 11:41:33 SkyScan query 11:41:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:41:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:33 Parameters OK 11:41:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:33 Set A/D data flow result=40 11:41:33 Set A/D channel type result=40 11:41:33 Set A/D encoding result=40 11:41:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:33 Set channel filter=0.000000e+000 result=40 11:41:33 Config A/D Result=40 11:41:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:33 Get A/D filter: -9.255963e+061 result=40 11:41:33 Get A/D value=-858993460 result=40 11:41:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:33 Parameters OK 11:41:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:33 Set A/D data flow result=40 11:41:33 Set A/D channel type result=40 11:41:33 Set A/D encoding result=40 11:41:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:33 Set channel filter=0.000000e+000 result=40 11:41:33 Config A/D Result=40 11:41:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:33 Get A/D filter: -9.255963e+061 result=40 11:41:33 Get A/D value=-858993460 result=40 11:41:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:33 Aux= 11:41:33 Message to Camera, serial 86717 queued 11:42:10 Received message from Master: op=PointingHead serial=86730 11:42:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:42:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:42:11 Point started: ret=0 11:42:11 point_skyscan result=0 11:42:11 Check angles 11:42:11 SkyScan query 11:42:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 11:42:12 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 11:42:12 Check angles 11:42:12 SkyScan query 11:42:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 11:42:13 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 11:42:13 Check angles 11:42:13 SkyScan query 11:42:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 11:42:14 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 11:42:14 Check angles 11:42:14 SkyScan query 11:42:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 11:42:14 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 11:42:14 Check angles 11:42:14 SkyScan query 11:42:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 11:42:15 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 11:42:15 Check angles 11:42:15 SkyScan query 11:42:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 11:42:16 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 11:42:16 Check angles 11:42:16 SkyScan query 11:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.535<-21969 Statuses=0008 0009 11:42:17 Msec=4500 True Az=112.995 Ze=-149.535 Az status=0008 Ze status=0009 11:42:17 Check angles 11:42:17 SkyScan query 11:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.46<-23364 Statuses=0008 0009 11:42:17 Msec=5250 True Az=112.995 Ze=-170.46 Az status=0008 Ze status=0009 11:42:17 Check angles 11:42:17 SkyScan query 11:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:42:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:42:18 Message to Master queued w/err=0: serial=86730 error=0 11:42:23 Received message from Master: op=Filter serial=86731 11:42:23 Color wheel filter change from 0 to 0 11:42:23 FLIGetFilterPos err=0 currentPosition=0 11:42:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:23 Filter is already there-color wheel unchanged 11:42:23 Received message from Master: op=Shutter serial=86732 11:42:23 Shutter LASER open 11:42:23 Received message from Camera: op=State serial=86734 11:42:23 GetSingleValue result=40 Value=cccccccc 11:42:23 SkyScan query 11:42:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:42:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:24 Parameters OK 11:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:24 Set A/D data flow result=40 11:42:24 Set A/D channel type result=40 11:42:24 Set A/D encoding result=40 11:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:24 Set channel filter=0.000000e+000 result=40 11:42:24 Config A/D Result=40 11:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:24 Get A/D filter: -9.255963e+061 result=40 11:42:24 Get A/D value=-858993460 result=40 11:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:24 Parameters OK 11:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:24 Set A/D data flow result=40 11:42:24 Set A/D channel type result=40 11:42:24 Set A/D encoding result=40 11:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:24 Set channel filter=0.000000e+000 result=40 11:42:24 Config A/D Result=40 11:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:24 Get A/D filter: -9.255963e+061 result=40 11:42:24 Get A/D value=-858993460 result=40 11:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:24 Aux= 11:42:24 Message to Camera, serial 86734 queued 11:42:31 Received message from Master: op=Shutter serial=86743 11:42:31 Shutter LASER close 11:42:32 Received message from Master: op=PointingHead serial=86747 11:42:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:42:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:42:32 Point started: ret=0 11:42:32 point_skyscan result=0 11:42:33 Check angles 11:42:33 SkyScan query 11:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 11:42:34 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 11:42:34 Check angles 11:42:34 SkyScan query 11:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.01<-20134 Statuses=0008 0009 11:42:34 Msec=750 True Az=112.995 Ze=-122.01 Az status=0008 Ze status=0009 11:42:34 Check angles 11:42:34 SkyScan query 11:42:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 11:42:35 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 11:42:35 Check angles 11:42:35 SkyScan query 11:42:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 11:42:36 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 11:42:36 Check angles 11:42:36 SkyScan query 11:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 11:42:37 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 11:42:37 Check angles 11:42:37 SkyScan query 11:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 11:42:37 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 11:42:37 Check angles 11:42:37 SkyScan query 11:42:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 11:42:38 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 11:42:38 Check angles 11:42:38 SkyScan query 11:42:39 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 11:42:39 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 11:42:39 Check angles 11:42:39 SkyScan query 11:42:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:42:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:42:40 Message to Master queued w/err=0: serial=86747 error=0 11:42:45 Received message from Master: op=Filter serial=86748 11:42:45 Color wheel filter change from 0 to 0 11:42:45 FLIGetFilterPos err=0 currentPosition=0 11:42:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:45 Filter is already there-color wheel unchanged 11:42:45 Received message from Master: op=Shutter serial=86749 11:42:45 Shutter LASER close 11:42:45 Received message from Camera: op=State serial=86751 11:42:45 GetSingleValue result=40 Value=cccccccc 11:42:45 SkyScan query 11:42:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:42:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:45 Parameters OK 11:42:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:45 Set A/D data flow result=40 11:42:45 Set A/D channel type result=40 11:42:45 Set A/D encoding result=40 11:42:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:45 Set channel filter=0.000000e+000 result=40 11:42:45 Config A/D Result=40 11:42:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:45 Get A/D filter: -9.255963e+061 result=40 11:42:45 Get A/D value=-858993460 result=40 11:42:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:45 Parameters OK 11:42:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:45 Set A/D data flow result=40 11:42:45 Set A/D channel type result=40 11:42:45 Set A/D encoding result=40 11:42:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:45 Set channel filter=0.000000e+000 result=40 11:42:45 Config A/D Result=40 11:42:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:45 Get A/D filter: -9.255963e+061 result=40 11:42:45 Get A/D value=-858993460 result=40 11:42:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:45 Aux= 11:42:45 Message to Camera, serial 86751 queued 11:43:22 Received message from Master: op=PointingHead serial=86764 11:43:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:43:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:43:23 Point started: ret=0 11:43:23 point_skyscan result=0 11:43:23 Check angles 11:43:23 SkyScan query 11:43:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:43:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:43:24 Message to Master queued w/err=0: serial=86764 error=0 11:43:29 Received message from Master: op=Filter serial=86765 11:43:29 Color wheel filter change from 0 to 0 11:43:29 FLIGetFilterPos err=0 currentPosition=0 11:43:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:29 Filter is already there-color wheel unchanged 11:43:29 Received message from Master: op=Shutter serial=86766 11:43:29 Shutter LASER close 11:43:29 Received message from Camera: op=State serial=86768 11:43:29 GetSingleValue result=40 Value=cccccccc 11:43:29 SkyScan query 11:43:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:43:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:30 Parameters OK 11:43:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:30 Set A/D data flow result=40 11:43:30 Set A/D channel type result=40 11:43:30 Set A/D encoding result=40 11:43:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:30 Set channel filter=0.000000e+000 result=40 11:43:30 Config A/D Result=40 11:43:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:30 Get A/D filter: -9.255963e+061 result=40 11:43:30 Get A/D value=-858993460 result=40 11:43:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:30 Parameters OK 11:43:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:30 Set A/D data flow result=40 11:43:30 Set A/D channel type result=40 11:43:30 Set A/D encoding result=40 11:43:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:30 Set channel filter=0.000000e+000 result=40 11:43:30 Config A/D Result=40 11:43:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:30 Get A/D filter: -9.255963e+061 result=40 11:43:30 Get A/D value=-858993460 result=40 11:43:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:30 Aux= 11:43:30 Message to Camera, serial 86768 queued [UTC 2019-3-3 11:43:50] 11:44:07 Received message from Master: op=PointingHead serial=86781 11:44:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:44:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:44:07 Point started: ret=0 11:44:07 point_skyscan result=0 11:44:08 Check angles 11:44:08 SkyScan query 11:44:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:44:08 Message to Master queued w/err=0: serial=86781 error=0 11:44:13 Received message from Master: op=Filter serial=86782 11:44:13 Color wheel filter change from 0 to 0 11:44:13 FLIGetFilterPos err=0 currentPosition=0 11:44:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:13 Filter is already there-color wheel unchanged 11:44:13 Received message from Master: op=Shutter serial=86783 11:44:13 Shutter LASER close 11:44:13 Received message from Camera: op=State serial=86785 11:44:13 GetSingleValue result=40 Value=cccccccc 11:44:13 SkyScan query 11:44:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:14 Parameters OK 11:44:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:14 Set A/D data flow result=40 11:44:14 Set A/D channel type result=40 11:44:14 Set A/D encoding result=40 11:44:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:14 Set channel filter=0.000000e+000 result=40 11:44:14 Config A/D Result=40 11:44:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:14 Get A/D filter: -9.255963e+061 result=40 11:44:14 Get A/D value=-858993460 result=40 11:44:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:14 Parameters OK 11:44:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:14 Set A/D data flow result=40 11:44:14 Set A/D channel type result=40 11:44:14 Set A/D encoding result=40 11:44:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:14 Set channel filter=0.000000e+000 result=40 11:44:14 Config A/D Result=40 11:44:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:14 Get A/D filter: -9.255963e+061 result=40 11:44:14 Get A/D value=-858993460 result=40 11:44:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:14 Aux= 11:44:14 Message to Camera, serial 86785 queued 11:44:51 Received message from Master: op=PointingHead serial=86798 11:44:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:44:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:44:51 Point started: ret=0 11:44:51 point_skyscan result=0 11:44:52 Check angles 11:44:52 SkyScan query 11:44:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:44:53 Message to Master queued w/err=0: serial=86798 error=0 11:44:58 Received message from Master: op=Filter serial=86799 11:44:58 Color wheel filter change from 0 to 0 11:44:58 FLIGetFilterPos err=0 currentPosition=0 11:44:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:58 Filter is already there-color wheel unchanged 11:44:58 Received message from Master: op=Shutter serial=86800 11:44:58 Shutter LASER close 11:44:58 Received message from Camera: op=State serial=86802 11:44:58 GetSingleValue result=40 Value=cccccccc 11:44:58 SkyScan query 11:44:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:58 Parameters OK 11:44:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:58 Set A/D data flow result=40 11:44:58 Set A/D channel type result=40 11:44:58 Set A/D encoding result=40 11:44:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:58 Set channel filter=0.000000e+000 result=40 11:44:58 Config A/D Result=40 11:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:58 Get A/D filter: -9.255963e+061 result=40 11:44:58 Get A/D value=-858993460 result=40 11:44:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:58 Parameters OK 11:44:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:58 Set A/D data flow result=40 11:44:58 Set A/D channel type result=40 11:44:58 Set A/D encoding result=40 11:44:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:58 Set channel filter=0.000000e+000 result=40 11:44:58 Config A/D Result=40 11:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:58 Get A/D filter: -9.255963e+061 result=40 11:44:58 Get A/D value=-858993460 result=40 11:44:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:58 Aux= 11:44:58 Message to Camera, serial 86802 queued 11:45:35 Received message from Master: op=PointingHead serial=86815 11:45:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:45:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:45:36 Point started: ret=0 11:45:36 point_skyscan result=0 11:45:36 Check angles 11:45:36 SkyScan query 11:45:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.655<-13577 Statuses=0008 0009 11:45:37 Msec=0 True Az=112.995 Ze=-23.655 Az status=0008 Ze status=0009 11:45:37 Check angles 11:45:37 SkyScan query 11:45:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.045<-15003 Statuses=0008 0009 11:45:38 Msec=750 True Az=112.995 Ze=-45.045 Az status=0008 Ze status=0009 11:45:38 Check angles 11:45:38 SkyScan query 11:45:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-66<-16400 Statuses=0008 0009 11:45:38 Msec=1500 True Az=112.995 Ze=-66 Az status=0008 Ze status=0009 11:45:39 Check angles 11:45:39 SkyScan query 11:45:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.94<-17796 Statuses=0008 0009 11:45:39 Msec=2250 True Az=112.995 Ze=-86.94 Az status=0008 Ze status=0009 11:45:39 Check angles 11:45:39 SkyScan query 11:45:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.895<-19193 Statuses=0008 0009 11:45:40 Msec=3000 True Az=112.995 Ze=-107.895 Az status=0008 Ze status=0009 11:45:40 Check angles 11:45:40 SkyScan query 11:45:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 11:45:41 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 11:45:41 Check angles 11:45:41 SkyScan query 11:45:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.24<-22016 Statuses=0008 0009 11:45:41 Msec=4500 True Az=112.995 Ze=-150.24 Az status=0008 Ze status=0009 11:45:42 Check angles 11:45:42 SkyScan query 11:45:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0008 0009 11:45:42 Msec=5250 True Az=112.995 Ze=-171.045 Az status=0008 Ze status=0009 11:45:42 Check angles 11:45:42 SkyScan query 11:45:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:45:43 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:45:43 Message to Master queued w/err=0: serial=86815 error=0 11:45:48 Received message from Master: op=Filter serial=86816 11:45:48 Color wheel filter change from 0 to 0 11:45:48 FLIGetFilterPos err=0 currentPosition=0 11:45:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:48 Filter is already there-color wheel unchanged 11:45:48 Received message from Master: op=Shutter serial=86817 11:45:48 Shutter LASER open 11:45:48 Received message from Camera: op=State serial=86819 11:45:48 GetSingleValue result=40 Value=cccccccc 11:45:48 SkyScan query 11:45:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:45:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:49 Parameters OK 11:45:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:49 Set A/D data flow result=40 11:45:49 Set A/D channel type result=40 11:45:49 Set A/D encoding result=40 11:45:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:49 Set channel filter=0.000000e+000 result=40 11:45:49 Config A/D Result=40 11:45:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:49 Get A/D filter: -9.255963e+061 result=40 11:45:49 Get A/D value=-858993460 result=40 11:45:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:49 Parameters OK 11:45:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:49 Set A/D data flow result=40 11:45:49 Set A/D channel type result=40 11:45:49 Set A/D encoding result=40 11:45:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:49 Set channel filter=0.000000e+000 result=40 11:45:49 Config A/D Result=40 11:45:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:49 Get A/D filter: -9.255963e+061 result=40 11:45:49 Get A/D value=-858993460 result=40 11:45:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:49 Aux= 11:45:49 Message to Camera, serial 86819 queued 11:45:57 Received message from Master: op=Shutter serial=86829 11:45:57 Shutter LASER close 11:45:58 Received message from Master: op=PointingHead serial=86833 11:45:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:45:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:45:58 Point started: ret=0 11:45:58 point_skyscan result=0 11:45:59 Check angles 11:45:59 SkyScan query 11:45:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 11:45:59 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 11:46:00 Check angles 11:46:00 SkyScan query 11:46:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 11:46:00 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 11:46:00 Check angles 11:46:00 SkyScan query 11:46:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 11:46:01 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 11:46:01 Check angles 11:46:01 SkyScan query 11:46:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 11:46:02 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 11:46:02 Check angles 11:46:02 SkyScan query 11:46:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.095<-15873 Statuses=0008 0009 11:46:03 Msec=3000 True Az=112.995 Ze=-58.095 Az status=0008 Ze status=0009 11:46:03 Check angles 11:46:03 SkyScan query 11:46:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.185<-14479 Statuses=0008 0009 11:46:03 Msec=3750 True Az=112.995 Ze=-37.185 Az status=0008 Ze status=0009 11:46:03 Check angles 11:46:03 SkyScan query 11:46:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.215<-13081 Statuses=0008 0009 11:46:04 Msec=4500 True Az=112.995 Ze=-16.215 Az status=0008 Ze status=0009 11:46:04 Check angles 11:46:04 SkyScan query 11:46:05 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 11:46:05 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 11:46:05 Check angles 11:46:05 SkyScan query 11:46:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:46:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:46:06 Message to Master queued w/err=0: serial=86833 error=0 11:46:11 Received message from Master: op=Filter serial=86834 11:46:11 Color wheel filter change from 0 to 0 11:46:11 FLIGetFilterPos err=0 currentPosition=0 11:46:11 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:11 Filter is already there-color wheel unchanged 11:46:11 Received message from Master: op=Shutter serial=86835 11:46:11 Shutter LASER close 11:46:11 Received message from Camera: op=State serial=86837 11:46:11 GetSingleValue result=40 Value=cccccccc 11:46:11 SkyScan query 11:46:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:46:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:11 Parameters OK 11:46:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:11 Set A/D data flow result=40 11:46:11 Set A/D channel type result=40 11:46:11 Set A/D encoding result=40 11:46:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:11 Set channel filter=0.000000e+000 result=40 11:46:11 Config A/D Result=40 11:46:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:11 Get A/D filter: -9.255963e+061 result=40 11:46:11 Get A/D value=-858993460 result=40 11:46:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:11 Parameters OK 11:46:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:11 Set A/D data flow result=40 11:46:11 Set A/D channel type result=40 11:46:11 Set A/D encoding result=40 11:46:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:11 Set channel filter=0.000000e+000 result=40 11:46:11 Config A/D Result=40 11:46:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:11 Get A/D filter: -9.255963e+061 result=40 11:46:11 Get A/D value=-858993460 result=40 11:46:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:11 Aux= 11:46:11 Message to Camera, serial 86837 queued 11:46:47 Received message from Master: op=PointingHead serial=86849 11:46:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:46:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:46:48 Point started: ret=0 11:46:48 point_skyscan result=0 11:46:48 Check angles 11:46:48 SkyScan query 11:46:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:46:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:46:49 Message to Master queued w/err=0: serial=86849 error=0 11:46:54 Received message from Master: op=Filter serial=86850 11:46:54 Color wheel filter change from 0 to 0 11:46:54 FLIGetFilterPos err=0 currentPosition=0 11:46:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:54 Filter is already there-color wheel unchanged 11:46:54 Received message from Master: op=Shutter serial=86851 11:46:54 Shutter LASER close 11:46:54 Received message from Camera: op=State serial=86853 11:46:54 GetSingleValue result=40 Value=cccccccc 11:46:54 SkyScan query 11:46:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:46:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:55 Parameters OK 11:46:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:55 Set A/D data flow result=40 11:46:55 Set A/D channel type result=40 11:46:55 Set A/D encoding result=40 11:46:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:55 Set channel filter=0.000000e+000 result=40 11:46:55 Config A/D Result=40 11:46:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:55 Get A/D filter: -9.255963e+061 result=40 11:46:55 Get A/D value=-858993460 result=40 11:46:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:55 Parameters OK 11:46:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:55 Set A/D data flow result=40 11:46:55 Set A/D channel type result=40 11:46:55 Set A/D encoding result=40 11:46:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:55 Set channel filter=0.000000e+000 result=40 11:46:55 Config A/D Result=40 11:46:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:55 Get A/D filter: -9.255963e+061 result=40 11:46:55 Get A/D value=-858993460 result=40 11:46:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:55 Aux= 11:46:55 Message to Camera, serial 86853 queued 11:47:32 Received message from Master: op=PointingHead serial=86866 11:47:32 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:47:32 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:47:32 Point started: ret=0 11:47:32 point_skyscan result=0 11:47:33 Check angles 11:47:33 SkyScan query 11:47:33 SkyScan query done: ret=0 az=135.735<-9049 ze=-6.51<-12434 Statuses=0009 0008 11:47:33 Msec=0 True Az=135.735 Ze=-6.51 Az status=0009 Ze status=0008 11:47:34 Check angles 11:47:34 SkyScan query 11:47:34 SkyScan query done: ret=0 az=153.33<-10222 ze=-6.495<-12433 Statuses=0009 0008 11:47:34 Msec=750 True Az=153.33 Ze=-6.495 Az status=0009 Ze status=0008 11:47:34 Check angles 11:47:34 SkyScan query 11:47:35 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.495<-12433 Statuses=0009 0008 11:47:35 Msec=1500 True Az=171.15 Ze=-6.495 Az status=0009 Ze status=0008 11:47:35 Check angles 11:47:35 SkyScan query 11:47:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:47:36 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:47:36 Message to Master queued w/err=0: serial=86866 error=0 11:47:41 Received message from Master: op=Filter serial=86867 11:47:41 Color wheel filter change from 0 to 0 11:47:41 FLIGetFilterPos err=0 currentPosition=0 11:47:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:47:41 Filter is already there-color wheel unchanged 11:47:41 Received message from Master: op=Shutter serial=86868 11:47:41 Shutter LASER close 11:47:41 Received message from Camera: op=State serial=86870 11:47:41 GetSingleValue result=40 Value=cccccccc 11:47:41 SkyScan query 11:47:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:47:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:41 Parameters OK 11:47:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:41 Set A/D data flow result=40 11:47:41 Set A/D channel type result=40 11:47:41 Set A/D encoding result=40 11:47:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:41 Set channel filter=0.000000e+000 result=40 11:47:41 Config A/D Result=40 11:47:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:41 Get A/D filter: -9.255963e+061 result=40 11:47:41 Get A/D value=-858993460 result=40 11:47:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:41 Parameters OK 11:47:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:41 Set A/D data flow result=40 11:47:41 Set A/D channel type result=40 11:47:41 Set A/D encoding result=40 11:47:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:41 Set channel filter=0.000000e+000 result=40 11:47:41 Config A/D Result=40 11:47:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:41 Get A/D filter: -9.255963e+061 result=40 11:47:41 Get A/D value=-858993460 result=40 11:47:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:47:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:47:41 Aux= 11:47:41 Message to Camera, serial 86870 queued 11:48:18 Received message from Master: op=PointingHead serial=86883 11:48:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:48:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:48:19 Point started: ret=0 11:48:19 point_skyscan result=0 11:48:19 Check angles 11:48:19 SkyScan query 11:48:20 SkyScan query done: ret=0 az=152.385<-10159 ze=6.51<-11566 Statuses=0009 0008 11:48:20 Msec=0 True Az=152.385 Ze=6.51 Az status=0009 Ze status=0008 11:48:20 Check angles 11:48:20 SkyScan query 11:48:21 SkyScan query done: ret=0 az=134.775<-8985 ze=6.495<-11567 Statuses=0009 0008 11:48:21 Msec=750 True Az=134.775 Ze=6.495 Az status=0009 Ze status=0008 11:48:21 Check angles 11:48:21 SkyScan query 11:48:21 SkyScan query done: ret=0 az=117.345<-7823 ze=6.495<-11567 Statuses=0009 0008 11:48:21 Msec=1500 True Az=117.345 Ze=6.495 Az status=0009 Ze status=0008 11:48:22 Check angles 11:48:22 SkyScan query 11:48:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:48:22 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:48:22 Message to Master queued w/err=0: serial=86883 error=0 11:48:27 Received message from Master: op=Filter serial=86884 11:48:27 Color wheel filter change from 0 to 0 11:48:27 FLIGetFilterPos err=0 currentPosition=0 11:48:27 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:27 Filter is already there-color wheel unchanged 11:48:27 Received message from Master: op=Shutter serial=86885 11:48:27 Shutter LASER close 11:48:27 Received message from Camera: op=State serial=86887 11:48:27 GetSingleValue result=40 Value=cccccccc 11:48:27 SkyScan query 11:48:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:48:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:28 Parameters OK 11:48:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:28 Set A/D data flow result=40 11:48:28 Set A/D channel type result=40 11:48:28 Set A/D encoding result=40 11:48:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:28 Set channel filter=0.000000e+000 result=40 11:48:28 Config A/D Result=40 11:48:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:28 Get A/D filter: -9.255963e+061 result=40 11:48:28 Get A/D value=-858993460 result=40 11:48:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:28 Parameters OK 11:48:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:28 Set A/D data flow result=40 11:48:28 Set A/D channel type result=40 11:48:28 Set A/D encoding result=40 11:48:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:28 Set channel filter=0.000000e+000 result=40 11:48:28 Config A/D Result=40 11:48:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:28 Get A/D filter: -9.255963e+061 result=40 11:48:28 Get A/D value=-858993460 result=40 11:48:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:28 Aux= 11:48:28 Message to Camera, serial 86887 queued 11:49:05 Received message from Master: op=PointingHead serial=86900 11:49:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:49:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:49:05 Point started: ret=0 11:49:05 point_skyscan result=0 11:49:06 Check angles 11:49:06 SkyScan query 11:49:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 11:49:07 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 11:49:07 Check angles 11:49:07 SkyScan query 11:49:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 11:49:07 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 11:49:07 Check angles 11:49:07 SkyScan query 11:49:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.235<-16349 Statuses=0008 0009 11:49:08 Msec=1500 True Az=112.995 Ze=-65.235 Az status=0008 Ze status=0009 11:49:08 Check angles 11:49:08 SkyScan query 11:49:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 11:49:09 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 11:49:09 Check angles 11:49:09 SkyScan query 11:49:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.13<-19142 Statuses=0008 0009 11:49:10 Msec=3000 True Az=112.995 Ze=-107.13 Az status=0008 Ze status=0009 11:49:10 Check angles 11:49:10 SkyScan query 11:49:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.1<-20540 Statuses=0008 0009 11:49:10 Msec=3750 True Az=112.995 Ze=-128.1 Az status=0008 Ze status=0009 11:49:10 Check angles 11:49:10 SkyScan query 11:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.04<-21936 Statuses=0008 0009 11:49:11 Msec=4500 True Az=112.995 Ze=-149.04 Az status=0008 Ze status=0009 11:49:11 Check angles 11:49:11 SkyScan query 11:49:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.995<-23333 Statuses=0008 0009 11:49:12 Msec=5250 True Az=112.995 Ze=-169.995 Az status=0008 Ze status=0009 11:49:12 Check angles 11:49:12 SkyScan query 11:49:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:49:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:49:13 Message to Master queued w/err=0: serial=86900 error=0 11:49:18 Received message from Master: op=Filter serial=86901 11:49:18 Color wheel filter change from 0 to 0 11:49:18 FLIGetFilterPos err=0 currentPosition=0 11:49:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:18 Filter is already there-color wheel unchanged 11:49:18 Received message from Master: op=Shutter serial=86902 11:49:18 Shutter LASER open 11:49:18 Received message from Camera: op=State serial=86904 11:49:18 GetSingleValue result=40 Value=cccccccc 11:49:18 SkyScan query 11:49:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:49:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:18 Parameters OK 11:49:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:18 Set A/D data flow result=40 11:49:18 Set A/D channel type result=40 11:49:18 Set A/D encoding result=40 11:49:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:18 Set channel filter=0.000000e+000 result=40 11:49:18 Config A/D Result=40 11:49:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:18 Get A/D filter: -9.255963e+061 result=40 11:49:18 Get A/D value=-858993460 result=40 11:49:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:18 Parameters OK 11:49:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:18 Set A/D data flow result=40 11:49:18 Set A/D channel type result=40 11:49:18 Set A/D encoding result=40 11:49:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:18 Set channel filter=0.000000e+000 result=40 11:49:18 Config A/D Result=40 11:49:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:18 Get A/D filter: -9.255963e+061 result=40 11:49:18 Get A/D value=-858993460 result=40 11:49:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:18 Aux= 11:49:18 Message to Camera, serial 86904 queued 11:49:27 Received message from Master: op=Shutter serial=86914 11:49:27 Shutter LASER close 11:49:27 Received message from Master: op=PointingHead serial=86918 11:49:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:49:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:49:28 Point started: ret=0 11:49:28 point_skyscan result=0 11:49:28 Check angles 11:49:28 SkyScan query 11:49:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 11:49:29 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 11:49:29 Check angles 11:49:29 SkyScan query 11:49:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 11:49:30 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 11:49:30 Check angles 11:49:30 SkyScan query 11:49:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 11:49:31 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 11:49:31 Check angles 11:49:31 SkyScan query 11:49:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.485<-17299 Statuses=0008 0009 11:49:31 Msec=2250 True Az=112.995 Ze=-79.485 Az status=0008 Ze status=0009 11:49:31 Check angles 11:49:31 SkyScan query 11:49:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.545<-15903 Statuses=0008 0009 11:49:32 Msec=3000 True Az=112.995 Ze=-58.545 Az status=0008 Ze status=0009 11:49:32 Check angles 11:49:32 SkyScan query 11:49:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.59<-14506 Statuses=0008 0009 11:49:33 Msec=3750 True Az=112.995 Ze=-37.59 Az status=0008 Ze status=0009 11:49:33 Check angles 11:49:33 SkyScan query 11:49:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.62<-13108 Statuses=0008 0009 11:49:34 Msec=4500 True Az=112.995 Ze=-16.62 Az status=0008 Ze status=0009 11:49:34 Check angles 11:49:34 SkyScan query 11:49:34 SkyScan query done: ret=0 az=112.995<-7533 ze=4.275<-11715 Statuses=0008 0009 11:49:34 Msec=5250 True Az=112.995 Ze=4.275 Az status=0008 Ze status=0009 11:49:34 Check angles 11:49:34 SkyScan query 11:49:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:49:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:49:35 Message to Master queued w/err=0: serial=86918 error=0 11:49:40 Received message from Master: op=Filter serial=86919 11:49:40 Color wheel filter change from 0 to 0 11:49:40 FLIGetFilterPos err=0 currentPosition=0 11:49:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:40 Filter is already there-color wheel unchanged 11:49:40 Received message from Master: op=Shutter serial=86920 11:49:40 Shutter LASER close 11:49:40 Received message from Camera: op=State serial=86922 11:49:40 GetSingleValue result=40 Value=cccccccc 11:49:40 SkyScan query 11:49:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:49:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:41 Parameters OK 11:49:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:41 Set A/D data flow result=40 11:49:41 Set A/D channel type result=40 11:49:41 Set A/D encoding result=40 11:49:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:41 Set channel filter=0.000000e+000 result=40 11:49:41 Config A/D Result=40 11:49:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:41 Get A/D filter: -9.255963e+061 result=40 11:49:41 Get A/D value=-858993460 result=40 11:49:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:41 Parameters OK 11:49:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:41 Set A/D data flow result=40 11:49:41 Set A/D channel type result=40 11:49:41 Set A/D encoding result=40 11:49:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:41 Set channel filter=0.000000e+000 result=40 11:49:41 Config A/D Result=40 11:49:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:41 Get A/D filter: -9.255963e+061 result=40 11:49:41 Get A/D value=-858993460 result=40 11:49:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:41 Aux= 11:49:41 Message to Camera, serial 86922 queued 11:50:18 Received message from Master: op=PointingHead serial=86935 11:50:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:50:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:50:18 Point started: ret=0 11:50:18 point_skyscan result=0 11:50:19 Check angles 11:50:19 SkyScan query 11:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:50:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:50:19 Message to Master queued w/err=0: serial=86935 error=0 11:50:24 Received message from Master: op=Filter serial=86936 11:50:24 Color wheel filter change from 0 to 0 11:50:24 FLIGetFilterPos err=0 currentPosition=0 11:50:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:24 Filter is already there-color wheel unchanged 11:50:25 Received message from Master: op=Shutter serial=86937 11:50:25 Shutter LASER close 11:50:25 Received message from Camera: op=State serial=86939 11:50:25 GetSingleValue result=40 Value=cccccccc 11:50:25 SkyScan query 11:50:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:50:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:25 Parameters OK 11:50:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:25 Set A/D data flow result=40 11:50:25 Set A/D channel type result=40 11:50:25 Set A/D encoding result=40 11:50:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:25 Set channel filter=0.000000e+000 result=40 11:50:25 Config A/D Result=40 11:50:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:25 Get A/D filter: -9.255963e+061 result=40 11:50:25 Get A/D value=-858993460 result=40 11:50:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:25 Parameters OK 11:50:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:25 Set A/D data flow result=40 11:50:25 Set A/D channel type result=40 11:50:25 Set A/D encoding result=40 11:50:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:25 Set channel filter=0.000000e+000 result=40 11:50:25 Config A/D Result=40 11:50:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:25 Get A/D filter: -9.255963e+061 result=40 11:50:25 Get A/D value=-858993460 result=40 11:50:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:25 Aux= 11:50:25 Message to Camera, serial 86939 queued 11:51:02 Received message from Master: op=PointingHead serial=86952 11:51:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:51:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:51:02 Point started: ret=0 11:51:02 point_skyscan result=0 11:51:03 Check angles 11:51:03 SkyScan query 11:51:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:51:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:51:04 Message to Master queued w/err=0: serial=86952 error=0 11:51:09 Received message from Master: op=Filter serial=86953 11:51:09 Color wheel filter change from 0 to 0 11:51:09 FLIGetFilterPos err=0 currentPosition=0 11:51:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:09 Filter is already there-color wheel unchanged 11:51:09 Received message from Master: op=Shutter serial=86954 11:51:09 Shutter LASER close 11:51:09 Received message from Camera: op=State serial=86956 11:51:09 GetSingleValue result=40 Value=cccccccc 11:51:09 SkyScan query 11:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:51:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:10 Parameters OK 11:51:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:10 Set A/D data flow result=40 11:51:10 Set A/D channel type result=40 11:51:10 Set A/D encoding result=40 11:51:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:10 Set channel filter=0.000000e+000 result=40 11:51:10 Config A/D Result=40 11:51:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:10 Get A/D filter: -9.255963e+061 result=40 11:51:10 Get A/D value=-858993460 result=40 11:51:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:10 Parameters OK 11:51:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:10 Set A/D data flow result=40 11:51:10 Set A/D channel type result=40 11:51:10 Set A/D encoding result=40 11:51:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:10 Set channel filter=0.000000e+000 result=40 11:51:10 Config A/D Result=40 11:51:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:10 Get A/D filter: -9.255963e+061 result=40 11:51:10 Get A/D value=-858993460 result=40 11:51:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:10 Aux= 11:51:10 Message to Camera, serial 86956 queued 11:51:45 Received message from Master: op=PointingHead serial=86968 11:51:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:51:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:51:46 Point started: ret=0 11:51:46 point_skyscan result=0 11:51:47 Check angles 11:51:47 SkyScan query 11:51:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:51:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:51:47 Message to Master queued w/err=0: serial=86968 error=0 11:51:52 Received message from Master: op=Filter serial=86969 11:51:52 Color wheel filter change from 0 to 0 11:51:52 FLIGetFilterPos err=0 currentPosition=0 11:51:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:52 Filter is already there-color wheel unchanged 11:51:52 Received message from Master: op=Shutter serial=86970 11:51:52 Shutter LASER close 11:51:52 Received message from Camera: op=State serial=86972 11:51:52 GetSingleValue result=40 Value=cccccccc 11:51:52 SkyScan query 11:51:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:51:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:53 Parameters OK 11:51:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:53 Set A/D data flow result=40 11:51:53 Set A/D channel type result=40 11:51:53 Set A/D encoding result=40 11:51:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:53 Set channel filter=0.000000e+000 result=40 11:51:53 Config A/D Result=40 11:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:53 Get A/D filter: -9.255963e+061 result=40 11:51:53 Get A/D value=-858993460 result=40 11:51:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:53 Parameters OK 11:51:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:53 Set A/D data flow result=40 11:51:53 Set A/D channel type result=40 11:51:53 Set A/D encoding result=40 11:51:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:53 Set channel filter=0.000000e+000 result=40 11:51:53 Config A/D Result=40 11:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:53 Get A/D filter: -9.255963e+061 result=40 11:51:53 Get A/D value=-858993460 result=40 11:51:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:53 Aux= 11:51:53 Message to Camera, serial 86972 queued 11:52:30 Received message from Master: op=PointingHead serial=86985 11:52:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:52:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:52:30 Point started: ret=0 11:52:30 point_skyscan result=0 11:52:31 Check angles 11:52:31 SkyScan query 11:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 11:52:31 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 11:52:32 Check angles 11:52:32 SkyScan query 11:52:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.965<-14931 Statuses=0008 0009 11:52:32 Msec=750 True Az=112.995 Ze=-43.965 Az status=0008 Ze status=0009 11:52:32 Check angles 11:52:32 SkyScan query 11:52:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 11:52:33 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 11:52:33 Check angles 11:52:33 SkyScan query 11:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 11:52:34 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 11:52:34 Check angles 11:52:34 SkyScan query 11:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.265<-19151 Statuses=0008 0009 11:52:34 Msec=3000 True Az=112.995 Ze=-107.265 Az status=0008 Ze status=0009 11:52:35 Check angles 11:52:35 SkyScan query 11:52:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.22<-20548 Statuses=0008 0009 11:52:35 Msec=3750 True Az=112.995 Ze=-128.22 Az status=0008 Ze status=0009 11:52:35 Check angles 11:52:35 SkyScan query 11:52:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.19<-21946 Statuses=0008 0009 11:52:36 Msec=4500 True Az=112.995 Ze=-149.19 Az status=0008 Ze status=0009 11:52:36 Check angles 11:52:36 SkyScan query 11:52:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.13<-23342 Statuses=0008 0009 11:52:37 Msec=5250 True Az=112.995 Ze=-170.13 Az status=0008 Ze status=0009 11:52:37 Check angles 11:52:37 SkyScan query 11:52:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:52:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:52:37 Message to Master queued w/err=0: serial=86985 error=0 11:52:42 Received message from Master: op=Filter serial=86986 11:52:42 Color wheel filter change from 0 to 0 11:52:42 FLIGetFilterPos err=0 currentPosition=0 11:52:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:42 Filter is already there-color wheel unchanged 11:52:43 Received message from Master: op=Shutter serial=86987 11:52:43 Shutter LASER open 11:52:43 Received message from Camera: op=State serial=86989 11:52:43 GetSingleValue result=40 Value=cccccccc 11:52:43 SkyScan query 11:52:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:52:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:43 Parameters OK 11:52:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:43 Set A/D data flow result=40 11:52:43 Set A/D channel type result=40 11:52:43 Set A/D encoding result=40 11:52:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:43 Set channel filter=0.000000e+000 result=40 11:52:43 Config A/D Result=40 11:52:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:43 Get A/D filter: -9.255963e+061 result=40 11:52:43 Get A/D value=-858993460 result=40 11:52:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:43 Parameters OK 11:52:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:43 Set A/D data flow result=40 11:52:43 Set A/D channel type result=40 11:52:43 Set A/D encoding result=40 11:52:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:43 Set channel filter=0.000000e+000 result=40 11:52:43 Config A/D Result=40 11:52:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:43 Get A/D filter: -9.255963e+061 result=40 11:52:43 Get A/D value=-858993460 result=40 11:52:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:43 Aux= 11:52:43 Message to Camera, serial 86989 queued 11:52:52 Received message from Master: op=Shutter serial=86999 11:52:52 Shutter LASER close 11:52:52 Received message from Master: op=PointingHead serial=87003 11:52:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:52:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:52:53 Point started: ret=0 11:52:53 point_skyscan result=0 11:52:53 Check angles 11:52:53 SkyScan query 11:52:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.535<-21569 Statuses=0008 0009 11:52:54 Msec=0 True Az=112.995 Ze=-143.535 Az status=0008 Ze status=0009 11:52:54 Check angles 11:52:54 SkyScan query 11:52:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 11:52:55 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 11:52:55 Check angles 11:52:55 SkyScan query 11:52:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 11:52:56 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 11:52:56 Check angles 11:52:56 SkyScan query 11:52:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 11:52:56 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 11:52:56 Check angles 11:52:56 SkyScan query 11:52:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.28<-15952 Statuses=0008 0009 11:52:57 Msec=3000 True Az=112.995 Ze=-59.28 Az status=0008 Ze status=0009 11:52:57 Check angles 11:52:57 SkyScan query 11:52:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.295<-14553 Statuses=0008 0009 11:52:58 Msec=3750 True Az=112.995 Ze=-38.295 Az status=0008 Ze status=0009 11:52:58 Check angles 11:52:58 SkyScan query 11:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.355<-13157 Statuses=0008 0009 11:52:59 Msec=4500 True Az=112.995 Ze=-17.355 Az status=0008 Ze status=0009 11:52:59 Check angles 11:52:59 SkyScan query 11:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=3.615<-11759 Statuses=0008 0009 11:52:59 Msec=5250 True Az=112.995 Ze=3.615 Az status=0008 Ze status=0009 11:52:59 Check angles 11:52:59 SkyScan query 11:53:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:53:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:53:00 Message to Master queued w/err=0: serial=87003 error=0 11:53:05 Received message from Master: op=Filter serial=87004 11:53:05 Color wheel filter change from 0 to 0 11:53:05 FLIGetFilterPos err=0 currentPosition=0 11:53:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:05 Filter is already there-color wheel unchanged 11:53:05 Received message from Master: op=Shutter serial=87005 11:53:05 Shutter LASER close 11:53:05 Received message from Camera: op=State serial=87007 11:53:05 GetSingleValue result=40 Value=cccccccc 11:53:05 SkyScan query 11:53:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:53:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:06 Parameters OK 11:53:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:06 Set A/D data flow result=40 11:53:06 Set A/D channel type result=40 11:53:06 Set A/D encoding result=40 11:53:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:06 Set channel filter=0.000000e+000 result=40 11:53:06 Config A/D Result=40 11:53:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:06 Get A/D filter: -9.255963e+061 result=40 11:53:06 Get A/D value=-858993460 result=40 11:53:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:06 Parameters OK 11:53:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:06 Set A/D data flow result=40 11:53:06 Set A/D channel type result=40 11:53:06 Set A/D encoding result=40 11:53:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:06 Set channel filter=0.000000e+000 result=40 11:53:06 Config A/D Result=40 11:53:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:06 Get A/D filter: -9.255963e+061 result=40 11:53:06 Get A/D value=-858993460 result=40 11:53:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:06 Aux= 11:53:06 Message to Camera, serial 87007 queued 11:53:43 Received message from Master: op=PointingHead serial=87020 11:53:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:53:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:53:43 Point started: ret=0 11:53:43 point_skyscan result=0 11:53:44 Check angles 11:53:44 SkyScan query 11:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:53:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:53:44 Message to Master queued w/err=0: serial=87020 error=0 11:53:49 Received message from Master: op=Filter serial=87021 11:53:49 Color wheel filter change from 0 to 0 11:53:49 FLIGetFilterPos err=0 currentPosition=0 11:53:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:49 Filter is already there-color wheel unchanged 11:53:50 Received message from Master: op=Shutter serial=87022 11:53:50 Shutter LASER close 11:53:50 Received message from Camera: op=State serial=87024 11:53:50 GetSingleValue result=40 Value=cccccccc 11:53:50 SkyScan query 11:53:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:53:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:50 Parameters OK 11:53:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:50 Set A/D data flow result=40 11:53:50 Set A/D channel type result=40 11:53:50 Set A/D encoding result=40 11:53:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:50 Set channel filter=0.000000e+000 result=40 11:53:50 Config A/D Result=40 11:53:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:50 Get A/D filter: -9.255963e+061 result=40 11:53:50 Get A/D value=-858993460 result=40 11:53:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:50 Parameters OK 11:53:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:50 Set A/D data flow result=40 11:53:50 Set A/D channel type result=40 11:53:50 Set A/D encoding result=40 11:53:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:50 Set channel filter=0.000000e+000 result=40 11:53:50 Config A/D Result=40 11:53:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:50 Get A/D filter: -9.255963e+061 result=40 11:53:50 Get A/D value=-858993460 result=40 11:53:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:50 Aux= 11:53:50 Message to Camera, serial 87024 queued 11:54:27 Received message from Master: op=PointingHead serial=87037 11:54:27 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:54:27 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:54:27 Point started: ret=0 11:54:27 point_skyscan result=0 11:54:28 Check angles 11:54:28 SkyScan query 11:54:29 SkyScan query done: ret=0 az=136.14<-9076 ze=-6.51<-12434 Statuses=0009 0008 11:54:29 Msec=0 True Az=136.14 Ze=-6.51 Az status=0009 Ze status=0008 11:54:29 Check angles 11:54:29 SkyScan query 11:54:30 SkyScan query done: ret=0 az=154.005<-10267 ze=-6.495<-12433 Statuses=0009 0008 [UTC 2019-3-3 11:54:30] 11:54:30 Msec=750 True Az=154.005 Ze=-6.495 Az status=0009 Ze status=0008 11:54:30 Check angles 11:54:30 SkyScan query 11:54:30 SkyScan query done: ret=0 az=171.495<-11433 ze=-6.495<-12433 Statuses=0009 0008 11:54:30 Msec=1500 True Az=171.495 Ze=-6.495 Az status=0009 Ze status=0008 11:54:30 Check angles 11:54:30 SkyScan query 11:54:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:54:31 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:54:31 Message to Master queued w/err=0: serial=87037 error=0 11:54:36 Received message from Master: op=Filter serial=87038 11:54:36 Color wheel filter change from 0 to 0 11:54:36 FLIGetFilterPos err=0 currentPosition=0 11:54:36 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:36 Filter is already there-color wheel unchanged 11:54:36 Received message from Master: op=Shutter serial=87039 11:54:36 Shutter LASER close 11:54:36 Received message from Camera: op=State serial=87041 11:54:36 GetSingleValue result=40 Value=cccccccc 11:54:36 SkyScan query 11:54:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:54:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:37 Parameters OK 11:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:37 Set A/D data flow result=40 11:54:37 Set A/D channel type result=40 11:54:37 Set A/D encoding result=40 11:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:37 Set channel filter=0.000000e+000 result=40 11:54:37 Config A/D Result=40 11:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:37 Get A/D filter: -9.255963e+061 result=40 11:54:37 Get A/D value=-858993460 result=40 11:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:37 Parameters OK 11:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:37 Set A/D data flow result=40 11:54:37 Set A/D channel type result=40 11:54:37 Set A/D encoding result=40 11:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:37 Set channel filter=0.000000e+000 result=40 11:54:37 Config A/D Result=40 11:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:37 Get A/D filter: -9.255963e+061 result=40 11:54:37 Get A/D value=-858993460 result=40 11:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:37 Aux= 11:54:37 Message to Camera, serial 87041 queued 11:55:14 Received message from Master: op=PointingHead serial=87054 11:55:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:55:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:55:14 Point started: ret=0 11:55:14 point_skyscan result=0 11:55:15 Check angles 11:55:15 SkyScan query 11:55:15 SkyScan query done: ret=0 az=152.52<-10168 ze=6.51<-11566 Statuses=0009 0008 11:55:15 Msec=0 True Az=152.52 Ze=6.51 Az status=0009 Ze status=0008 11:55:16 Check angles 11:55:16 SkyScan query 11:55:16 SkyScan query done: ret=0 az=135<-9000 ze=6.495<-11567 Statuses=0009 0008 11:55:16 Msec=750 True Az=135 Ze=6.495 Az status=0009 Ze status=0008 11:55:16 Check angles 11:55:16 SkyScan query 11:55:17 SkyScan query done: ret=0 az=117.54<-7836 ze=6.495<-11567 Statuses=0009 0008 11:55:17 Msec=1500 True Az=117.54 Ze=6.495 Az status=0009 Ze status=0008 11:55:17 Check angles 11:55:17 SkyScan query 11:55:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:55:18 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:55:18 Message to Master queued w/err=0: serial=87054 error=0 11:55:23 Received message from Master: op=Filter serial=87055 11:55:23 Color wheel filter change from 0 to 0 11:55:23 FLIGetFilterPos err=0 currentPosition=0 11:55:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:23 Filter is already there-color wheel unchanged 11:55:23 Received message from Master: op=Shutter serial=87056 11:55:23 Shutter LASER close 11:55:23 Received message from Camera: op=State serial=87058 11:55:23 GetSingleValue result=40 Value=cccccccc 11:55:23 SkyScan query 11:55:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:55:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:23 Parameters OK 11:55:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:23 Set A/D data flow result=40 11:55:23 Set A/D channel type result=40 11:55:23 Set A/D encoding result=40 11:55:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:23 Set channel filter=0.000000e+000 result=40 11:55:23 Config A/D Result=40 11:55:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:23 Get A/D filter: -9.255963e+061 result=40 11:55:23 Get A/D value=-858993460 result=40 11:55:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:23 Parameters OK 11:55:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:23 Set A/D data flow result=40 11:55:23 Set A/D channel type result=40 11:55:23 Set A/D encoding result=40 11:55:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:23 Set channel filter=0.000000e+000 result=40 11:55:23 Config A/D Result=40 11:55:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:23 Get A/D filter: -9.255963e+061 result=40 11:55:23 Get A/D value=-858993460 result=40 11:55:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:23 Aux= 11:55:23 Message to Camera, serial 87058 queued 11:56:00 Received message from Master: op=PointingHead serial=87071 11:56:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:56:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:56:01 Point started: ret=0 11:56:01 point_skyscan result=0 11:56:01 Check angles 11:56:01 SkyScan query 11:56:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 11:56:02 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 11:56:02 Check angles 11:56:02 SkyScan query 11:56:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 11:56:03 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 11:56:03 Check angles 11:56:03 SkyScan query 11:56:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 11:56:03 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 11:56:04 Check angles 11:56:04 SkyScan query 11:56:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.31<-17754 Statuses=0008 0009 11:56:04 Msec=2250 True Az=112.995 Ze=-86.31 Az status=0008 Ze status=0009 11:56:04 Check angles 11:56:04 SkyScan query 11:56:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.25<-19150 Statuses=0008 0009 11:56:05 Msec=3000 True Az=112.995 Ze=-107.25 Az status=0008 Ze status=0009 11:56:05 Check angles 11:56:05 SkyScan query 11:56:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.61<-20574 Statuses=0008 0009 11:56:06 Msec=3750 True Az=112.995 Ze=-128.61 Az status=0008 Ze status=0009 11:56:06 Check angles 11:56:06 SkyScan query 11:56:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.565<-21971 Statuses=0008 0009 11:56:06 Msec=4500 True Az=112.995 Ze=-149.565 Az status=0008 Ze status=0009 11:56:07 Check angles 11:56:07 SkyScan query 11:56:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.52<-23368 Statuses=0008 0009 11:56:07 Msec=5250 True Az=112.995 Ze=-170.52 Az status=0008 Ze status=0009 11:56:07 Check angles 11:56:07 SkyScan query 11:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:56:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:56:08 Message to Master queued w/err=0: serial=87071 error=0 11:56:13 Received message from Master: op=Filter serial=87072 11:56:13 Color wheel filter change from 0 to 0 11:56:13 FLIGetFilterPos err=0 currentPosition=0 11:56:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:13 Filter is already there-color wheel unchanged 11:56:13 Received message from Master: op=Shutter serial=87073 11:56:13 Shutter LASER open 11:56:13 Received message from Camera: op=State serial=87075 11:56:13 GetSingleValue result=40 Value=cccccccc 11:56:13 SkyScan query 11:56:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:56:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:14 Parameters OK 11:56:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:14 Set A/D data flow result=40 11:56:14 Set A/D channel type result=40 11:56:14 Set A/D encoding result=40 11:56:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:14 Set channel filter=0.000000e+000 result=40 11:56:14 Config A/D Result=40 11:56:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:14 Get A/D filter: -9.255963e+061 result=40 11:56:14 Get A/D value=-858993460 result=40 11:56:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:14 Parameters OK 11:56:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:14 Set A/D data flow result=40 11:56:14 Set A/D channel type result=40 11:56:14 Set A/D encoding result=40 11:56:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:14 Set channel filter=0.000000e+000 result=40 11:56:14 Config A/D Result=40 11:56:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:14 Get A/D filter: -9.255963e+061 result=40 11:56:14 Get A/D value=-858993460 result=40 11:56:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:14 Aux= 11:56:14 Message to Camera, serial 87075 queued 11:56:22 Received message from Master: op=Shutter serial=87085 11:56:22 Shutter LASER close 11:56:23 Received message from Master: op=PointingHead serial=87089 11:56:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:56:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:56:23 Point started: ret=0 11:56:23 point_skyscan result=0 11:56:24 Check angles 11:56:24 SkyScan query 11:56:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 11:56:24 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 11:56:25 Check angles 11:56:25 SkyScan query 11:56:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 11:56:25 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 11:56:25 Check angles 11:56:25 SkyScan query 11:56:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.425<-18695 Statuses=0008 0009 11:56:26 Msec=1500 True Az=112.995 Ze=-100.425 Az status=0008 Ze status=0009 11:56:26 Check angles 11:56:26 SkyScan query 11:56:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.455<-17297 Statuses=0008 0009 11:56:27 Msec=2250 True Az=112.995 Ze=-79.455 Az status=0008 Ze status=0009 11:56:27 Check angles 11:56:27 SkyScan query 11:56:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 11:56:27 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 11:56:28 Check angles 11:56:28 SkyScan query 11:56:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 11:56:28 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 11:56:28 Check angles 11:56:28 SkyScan query 11:56:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 11:56:29 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 11:56:29 Check angles 11:56:29 SkyScan query 11:56:30 SkyScan query done: ret=0 az=112.995<-7533 ze=4.32<-11712 Statuses=0008 0009 11:56:30 Msec=5250 True Az=112.995 Ze=4.32 Az status=0008 Ze status=0009 11:56:30 Check angles 11:56:30 SkyScan query 11:56:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:56:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:56:30 Message to Master queued w/err=0: serial=87089 error=0 11:56:35 Received message from Master: op=Filter serial=87090 11:56:35 Color wheel filter change from 0 to 0 11:56:35 FLIGetFilterPos err=0 currentPosition=0 11:56:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:35 Filter is already there-color wheel unchanged 11:56:36 Received message from Master: op=Shutter serial=87091 11:56:36 Shutter LASER close 11:56:36 Received message from Camera: op=State serial=87093 11:56:36 GetSingleValue result=40 Value=cccccccc 11:56:36 SkyScan query 11:56:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:56:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:36 Parameters OK 11:56:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:36 Set A/D data flow result=40 11:56:36 Set A/D channel type result=40 11:56:36 Set A/D encoding result=40 11:56:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:36 Set channel filter=0.000000e+000 result=40 11:56:36 Config A/D Result=40 11:56:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:36 Get A/D filter: -9.255963e+061 result=40 11:56:36 Get A/D value=-858993460 result=40 11:56:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:36 Parameters OK 11:56:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:36 Set A/D data flow result=40 11:56:36 Set A/D channel type result=40 11:56:36 Set A/D encoding result=40 11:56:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:36 Set channel filter=0.000000e+000 result=40 11:56:36 Config A/D Result=40 11:56:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:36 Get A/D filter: -9.255963e+061 result=40 11:56:36 Get A/D value=-858993460 result=40 11:56:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:36 Aux= 11:56:36 Message to Camera, serial 87093 queued 11:57:13 Received message from Master: op=PointingHead serial=87106 11:57:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:57:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:57:14 Point started: ret=0 11:57:14 point_skyscan result=0 11:57:14 Check angles 11:57:14 SkyScan query 11:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:57:15 Message to Master queued w/err=0: serial=87106 error=0 11:57:20 Received message from Master: op=Filter serial=87107 11:57:20 Color wheel filter change from 0 to 0 11:57:20 FLIGetFilterPos err=0 currentPosition=0 11:57:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:20 Filter is already there-color wheel unchanged 11:57:20 Received message from Master: op=Shutter serial=87108 11:57:20 Shutter LASER close 11:57:20 Received message from Camera: op=State serial=87110 11:57:20 GetSingleValue result=40 Value=cccccccc 11:57:20 SkyScan query 11:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:21 Parameters OK 11:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:21 Set A/D data flow result=40 11:57:21 Set A/D channel type result=40 11:57:21 Set A/D encoding result=40 11:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:21 Set channel filter=0.000000e+000 result=40 11:57:21 Config A/D Result=40 11:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:21 Get A/D filter: -9.255963e+061 result=40 11:57:21 Get A/D value=-858993460 result=40 11:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:21 Parameters OK 11:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:21 Set A/D data flow result=40 11:57:21 Set A/D channel type result=40 11:57:21 Set A/D encoding result=40 11:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:21 Set channel filter=0.000000e+000 result=40 11:57:21 Config A/D Result=40 11:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:21 Get A/D filter: -9.255963e+061 result=40 11:57:21 Get A/D value=-858993460 result=40 11:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:21 Aux= 11:57:21 Message to Camera, serial 87110 queued 11:57:58 Received message from Master: op=PointingHead serial=87123 11:57:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:57:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:57:58 Point started: ret=0 11:57:58 point_skyscan result=0 11:57:59 Check angles 11:57:59 SkyScan query 11:57:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:57:59 Message to Master queued w/err=0: serial=87123 error=0 11:58:04 Received message from Master: op=Filter serial=87124 11:58:04 Color wheel filter change from 0 to 0 11:58:04 FLIGetFilterPos err=0 currentPosition=0 11:58:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:04 Filter is already there-color wheel unchanged 11:58:04 Received message from Master: op=Shutter serial=87125 11:58:04 Shutter LASER close 11:58:05 Received message from Camera: op=State serial=87127 11:58:05 GetSingleValue result=40 Value=cccccccc 11:58:05 SkyScan query 11:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:58:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:05 Parameters OK 11:58:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:05 Set A/D data flow result=40 11:58:05 Set A/D channel type result=40 11:58:05 Set A/D encoding result=40 11:58:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:05 Set channel filter=0.000000e+000 result=40 11:58:05 Config A/D Result=40 11:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:05 Get A/D filter: -9.255963e+061 result=40 11:58:05 Get A/D value=-858993460 result=40 11:58:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:05 Parameters OK 11:58:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:05 Set A/D data flow result=40 11:58:05 Set A/D channel type result=40 11:58:05 Set A/D encoding result=40 11:58:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:05 Set channel filter=0.000000e+000 result=40 11:58:05 Config A/D Result=40 11:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:05 Get A/D filter: -9.255963e+061 result=40 11:58:05 Get A/D value=-858993460 result=40 11:58:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:05 Aux= 11:58:05 Message to Camera, serial 87127 queued 11:58:42 Received message from Master: op=PointingHead serial=87140 11:58:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:58:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:58:42 Point started: ret=0 11:58:42 point_skyscan result=0 11:58:43 Check angles 11:58:43 SkyScan query 11:58:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:58:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:58:44 Message to Master queued w/err=0: serial=87140 error=0 11:58:49 Received message from Master: op=Filter serial=87141 11:58:49 Color wheel filter change from 0 to 0 11:58:49 FLIGetFilterPos err=0 currentPosition=0 11:58:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:49 Filter is already there-color wheel unchanged 11:58:49 Received message from Master: op=Shutter serial=87142 11:58:49 Shutter LASER close 11:58:49 Received message from Camera: op=State serial=87144 11:58:49 GetSingleValue result=40 Value=cccccccc 11:58:49 SkyScan query 11:58:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:58:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:49 Parameters OK 11:58:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:49 Set A/D data flow result=40 11:58:49 Set A/D channel type result=40 11:58:49 Set A/D encoding result=40 11:58:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:49 Set channel filter=0.000000e+000 result=40 11:58:49 Config A/D Result=40 11:58:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:49 Get A/D filter: -9.255963e+061 result=40 11:58:49 Get A/D value=-858993460 result=40 11:58:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:49 Parameters OK 11:58:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:49 Set A/D data flow result=40 11:58:49 Set A/D channel type result=40 11:58:49 Set A/D encoding result=40 11:58:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:49 Set channel filter=0.000000e+000 result=40 11:58:49 Config A/D Result=40 11:58:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:49 Get A/D filter: -9.255963e+061 result=40 11:58:49 Get A/D value=-858993460 result=40 11:58:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:49 Aux= 11:58:49 Message to Camera, serial 87144 queued 11:59:26 Received message from Master: op=PointingHead serial=87157 11:59:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:59:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:59:27 Point started: ret=0 11:59:27 point_skyscan result=0 11:59:27 Check angles 11:59:27 SkyScan query 11:59:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 11:59:28 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 11:59:28 Check angles 11:59:28 SkyScan query 11:59:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 11:59:29 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 11:59:29 Check angles 11:59:29 SkyScan query 11:59:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.98<-16332 Statuses=0008 0009 11:59:29 Msec=1500 True Az=112.995 Ze=-64.98 Az status=0008 Ze status=0009 11:59:30 Check angles 11:59:30 SkyScan query 11:59:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 11:59:30 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 11:59:30 Check angles 11:59:30 SkyScan query 11:59:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 11:59:31 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 11:59:31 Check angles 11:59:31 SkyScan query 11:59:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.845<-20523 Statuses=0008 0009 11:59:32 Msec=3750 True Az=112.995 Ze=-127.845 Az status=0008 Ze status=0009 11:59:32 Check angles 11:59:32 SkyScan query 11:59:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.8<-21920 Statuses=0008 0009 11:59:32 Msec=4500 True Az=112.995 Ze=-148.8 Az status=0008 Ze status=0009 11:59:33 Check angles 11:59:33 SkyScan query 11:59:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.725<-23315 Statuses=0008 0009 11:59:33 Msec=5250 True Az=112.995 Ze=-169.725 Az status=0008 Ze status=0009 11:59:33 Check angles 11:59:33 SkyScan query 11:59:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:59:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:59:34 Message to Master queued w/err=0: serial=87157 error=0 11:59:39 Received message from Master: op=Filter serial=87158 11:59:39 Color wheel filter change from 0 to 0 11:59:39 FLIGetFilterPos err=0 currentPosition=0 11:59:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:39 Filter is already there-color wheel unchanged 11:59:39 Received message from Master: op=Shutter serial=87159 11:59:39 Shutter LASER open 11:59:39 Received message from Camera: op=State serial=87161 11:59:39 GetSingleValue result=40 Value=cccccccc 11:59:39 SkyScan query 11:59:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:59:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:40 Parameters OK 11:59:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:40 Set A/D data flow result=40 11:59:40 Set A/D channel type result=40 11:59:40 Set A/D encoding result=40 11:59:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:40 Set channel filter=0.000000e+000 result=40 11:59:40 Config A/D Result=40 11:59:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:40 Get A/D filter: -9.255963e+061 result=40 11:59:40 Get A/D value=-858993460 result=40 11:59:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:40 Parameters OK 11:59:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:40 Set A/D data flow result=40 11:59:40 Set A/D channel type result=40 11:59:40 Set A/D encoding result=40 11:59:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:40 Set channel filter=0.000000e+000 result=40 11:59:40 Config A/D Result=40 11:59:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:40 Get A/D filter: -9.255963e+061 result=40 11:59:40 Get A/D value=-858993460 result=40 11:59:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:40 Aux= 11:59:40 Message to Camera, serial 87161 queued 11:59:48 Received message from Master: op=Shutter serial=87171 11:59:48 Shutter LASER close 11:59:49 Received message from Master: op=PointingHead serial=87175 11:59:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:59:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:59:49 Point started: ret=0 11:59:49 point_skyscan result=0 11:59:50 Check angles 11:59:50 SkyScan query 11:59:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 11:59:51 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 11:59:51 Check angles 11:59:51 SkyScan query 11:59:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.92<-20128 Statuses=0008 0009 11:59:51 Msec=750 True Az=112.995 Ze=-121.92 Az status=0008 Ze status=0009 11:59:51 Check angles 11:59:51 SkyScan query 11:59:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.995<-18733 Statuses=0008 0009 11:59:52 Msec=1500 True Az=112.995 Ze=-100.995 Az status=0008 Ze status=0009 11:59:52 Check angles 11:59:52 SkyScan query 11:59:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 11:59:53 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 11:59:53 Check angles 11:59:53 SkyScan query 11:59:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.635<-15909 Statuses=0008 0009 11:59:54 Msec=3000 True Az=112.995 Ze=-58.635 Az status=0008 Ze status=0009 11:59:54 Check angles 11:59:54 SkyScan query 11:59:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.68<-14512 Statuses=0008 0009 11:59:54 Msec=3750 True Az=112.995 Ze=-37.68 Az status=0008 Ze status=0009 11:59:54 Check angles 11:59:54 SkyScan query 11:59:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.725<-13115 Statuses=0008 0009 11:59:55 Msec=4500 True Az=112.995 Ze=-16.725 Az status=0008 Ze status=0009 11:59:55 Check angles 11:59:55 SkyScan query 11:59:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 11:59:56 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 11:59:56 Check angles 11:59:56 SkyScan query 11:59:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:59:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:59:57 Message to Master queued w/err=0: serial=87175 error=0 12:00:02 Received message from Master: op=Filter serial=87176 12:00:02 Color wheel filter change from 0 to 0 12:00:02 FLIGetFilterPos err=0 currentPosition=0 12:00:02 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:02 Filter is already there-color wheel unchanged 12:00:02 Received message from Master: op=Shutter serial=87177 12:00:02 Shutter LASER close 12:00:02 Received message from Camera: op=State serial=87179 12:00:02 GetSingleValue result=40 Value=cccccccc 12:00:02 SkyScan query 12:00:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:00:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:02 Parameters OK 12:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:02 Set A/D data flow result=40 12:00:02 Set A/D channel type result=40 12:00:02 Set A/D encoding result=40 12:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:02 Set channel filter=0.000000e+000 result=40 12:00:02 Config A/D Result=40 12:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:02 Get A/D filter: -9.255963e+061 result=40 12:00:02 Get A/D value=-858993460 result=40 12:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:02 Parameters OK 12:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:02 Set A/D data flow result=40 12:00:02 Set A/D channel type result=40 12:00:02 Set A/D encoding result=40 12:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:02 Set channel filter=0.000000e+000 result=40 12:00:02 Config A/D Result=40 12:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:02 Get A/D filter: -9.255963e+061 result=40 12:00:02 Get A/D value=-858993460 result=40 12:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:02 Aux= 12:00:02 Message to Camera, serial 87179 queued 12:00:39 Received message from Master: op=PointingHead serial=87192 12:00:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:00:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:00:40 Point started: ret=0 12:00:40 point_skyscan result=0 12:00:40 Check angles 12:00:40 SkyScan query 12:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:00:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:00:41 Message to Master queued w/err=0: serial=87192 error=0 12:00:46 Received message from Master: op=Filter serial=87193 12:00:46 Color wheel filter change from 0 to 0 12:00:46 FLIGetFilterPos err=0 currentPosition=0 12:00:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:46 Filter is already there-color wheel unchanged 12:00:46 Received message from Master: op=Shutter serial=87194 12:00:46 Shutter LASER close 12:00:46 Received message from Camera: op=State serial=87196 12:00:46 GetSingleValue result=40 Value=cccccccc 12:00:46 SkyScan query 12:00:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:00:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:47 Parameters OK 12:00:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:47 Set A/D data flow result=40 12:00:47 Set A/D channel type result=40 12:00:47 Set A/D encoding result=40 12:00:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:47 Set channel filter=0.000000e+000 result=40 12:00:47 Config A/D Result=40 12:00:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:47 Get A/D filter: -9.255963e+061 result=40 12:00:47 Get A/D value=-858993460 result=40 12:00:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:47 Parameters OK 12:00:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:47 Set A/D data flow result=40 12:00:47 Set A/D channel type result=40 12:00:47 Set A/D encoding result=40 12:00:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:47 Set channel filter=0.000000e+000 result=40 12:00:47 Config A/D Result=40 12:00:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:47 Get A/D filter: -9.255963e+061 result=40 12:00:47 Get A/D value=-858993460 result=40 12:00:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:47 Aux= 12:00:47 Message to Camera, serial 87196 queued 12:01:24 Received message from Master: op=PointingHead serial=87209 12:01:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:01:24 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:01:24 Point started: ret=0 12:01:24 point_skyscan result=0 12:01:25 Check angles 12:01:25 SkyScan query 12:01:25 SkyScan query done: ret=0 az=135.855<-9057 ze=-6.51<-12434 Statuses=0009 0008 12:01:25 Msec=0 True Az=135.855 Ze=-6.51 Az status=0009 Ze status=0008 12:01:26 Check angles 12:01:26 SkyScan query 12:01:26 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 12:01:26 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 12:01:26 Check angles 12:01:26 SkyScan query 12:01:27 SkyScan query done: ret=0 az=171.51<-11434 ze=-6.495<-12433 Statuses=0009 0008 12:01:27 Msec=1500 True Az=171.51 Ze=-6.495 Az status=0009 Ze status=0008 12:01:27 Check angles 12:01:27 SkyScan query 12:01:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:01:28 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:01:28 Message to Master queued w/err=0: serial=87209 error=0 12:01:33 Received message from Master: op=Filter serial=87210 12:01:33 Color wheel filter change from 0 to 0 12:01:33 FLIGetFilterPos err=0 currentPosition=0 12:01:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:01:33 Filter is already there-color wheel unchanged 12:01:33 Received message from Master: op=Shutter serial=87211 12:01:33 Shutter LASER close 12:01:33 Received message from Camera: op=State serial=87213 12:01:33 GetSingleValue result=40 Value=cccccccc 12:01:33 SkyScan query 12:01:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:01:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:33 Parameters OK 12:01:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:33 Set A/D data flow result=40 12:01:33 Set A/D channel type result=40 12:01:33 Set A/D encoding result=40 12:01:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:33 Set channel filter=0.000000e+000 result=40 12:01:33 Config A/D Result=40 12:01:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:33 Get A/D filter: -9.255963e+061 result=40 12:01:33 Get A/D value=-858993460 result=40 12:01:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:33 Parameters OK 12:01:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:33 Set A/D data flow result=40 12:01:33 Set A/D channel type result=40 12:01:33 Set A/D encoding result=40 12:01:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:33 Set channel filter=0.000000e+000 result=40 12:01:33 Config A/D Result=40 12:01:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:33 Get A/D filter: -9.255963e+061 result=40 12:01:33 Get A/D value=-858993460 result=40 12:01:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:01:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:01:33 Aux= 12:01:33 Message to Camera, serial 87213 queued 12:02:10 Received message from Master: op=PointingHead serial=87226 12:02:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:02:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:02:11 Point started: ret=0 12:02:11 point_skyscan result=0 12:02:11 Check angles 12:02:11 SkyScan query 12:02:12 SkyScan query done: ret=0 az=152.505<-10167 ze=6.51<-11566 Statuses=0009 0008 12:02:12 Msec=0 True Az=152.505 Ze=6.51 Az status=0009 Ze status=0008 12:02:12 Check angles 12:02:12 SkyScan query 12:02:13 SkyScan query done: ret=0 az=135.03<-9002 ze=6.495<-11567 Statuses=0009 0008 12:02:13 Msec=750 True Az=135.03 Ze=6.495 Az status=0009 Ze status=0008 12:02:13 Check angles 12:02:13 SkyScan query 12:02:13 SkyScan query done: ret=0 az=117.18<-7812 ze=6.495<-11567 Statuses=0009 0008 12:02:13 Msec=1500 True Az=117.18 Ze=6.495 Az status=0009 Ze status=0008 12:02:14 Check angles 12:02:14 SkyScan query 12:02:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:02:14 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:02:14 Message to Master queued w/err=0: serial=87226 error=0 12:02:19 Received message from Master: op=Filter serial=87227 12:02:19 Color wheel filter change from 0 to 0 12:02:19 FLIGetFilterPos err=0 currentPosition=0 12:02:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:19 Filter is already there-color wheel unchanged 12:02:19 Received message from Master: op=Shutter serial=87228 12:02:19 Shutter LASER close 12:02:19 Received message from Camera: op=State serial=87230 12:02:19 GetSingleValue result=40 Value=cccccccc 12:02:19 SkyScan query 12:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:02:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:20 Parameters OK 12:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:20 Set A/D data flow result=40 12:02:20 Set A/D channel type result=40 12:02:20 Set A/D encoding result=40 12:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:20 Set channel filter=0.000000e+000 result=40 12:02:20 Config A/D Result=40 12:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:20 Get A/D filter: -9.255963e+061 result=40 12:02:20 Get A/D value=-858993460 result=40 12:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:20 Parameters OK 12:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:20 Set A/D data flow result=40 12:02:20 Set A/D channel type result=40 12:02:20 Set A/D encoding result=40 12:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:20 Set channel filter=0.000000e+000 result=40 12:02:20 Config A/D Result=40 12:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:20 Get A/D filter: -9.255963e+061 result=40 12:02:20 Get A/D value=-858993460 result=40 12:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:20 Aux= 12:02:20 Message to Camera, serial 87230 queued 12:02:57 Received message from Master: op=PointingHead serial=87243 12:02:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:02:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:02:57 Point started: ret=0 12:02:57 point_skyscan result=0 12:02:58 Check angles 12:02:58 SkyScan query 12:02:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 12:02:58 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 12:02:59 Check angles 12:02:59 SkyScan query 12:02:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 12:02:59 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 12:02:59 Check angles 12:02:59 SkyScan query 12:03:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 12:03:00 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 12:03:00 Check angles 12:03:00 SkyScan query 12:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 12:03:01 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 12:03:01 Check angles 12:03:01 SkyScan query 12:03:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-108<-19200 Statuses=0008 0009 12:03:02 Msec=3000 True Az=112.995 Ze=-108 Az status=0008 Ze status=0009 12:03:02 Check angles 12:03:02 SkyScan query 12:03:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 12:03:02 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 12:03:02 Check angles 12:03:02 SkyScan query 12:03:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.91<-21994 Statuses=0008 0009 12:03:03 Msec=4500 True Az=112.995 Ze=-149.91 Az status=0008 Ze status=0009 12:03:03 Check angles 12:03:03 SkyScan query 12:03:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 12:03:04 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 12:03:04 Check angles 12:03:04 SkyScan query 12:03:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:03:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:03:05 Message to Master queued w/err=0: serial=87243 error=0 12:03:10 Received message from Master: op=Filter serial=87244 12:03:10 Color wheel filter change from 0 to 0 12:03:10 FLIGetFilterPos err=0 currentPosition=0 12:03:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:10 Filter is already there-color wheel unchanged 12:03:10 Received message from Master: op=Shutter serial=87245 12:03:10 Shutter LASER open 12:03:10 Received message from Camera: op=State serial=87247 12:03:10 GetSingleValue result=40 Value=cccccccc 12:03:10 SkyScan query 12:03:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:03:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:10 Parameters OK 12:03:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:10 Set A/D data flow result=40 12:03:10 Set A/D channel type result=40 12:03:10 Set A/D encoding result=40 12:03:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:10 Set channel filter=0.000000e+000 result=40 12:03:10 Config A/D Result=40 12:03:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:10 Get A/D filter: -9.255963e+061 result=40 12:03:10 Get A/D value=-858993460 result=40 12:03:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:10 Parameters OK 12:03:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:10 Set A/D data flow result=40 12:03:10 Set A/D channel type result=40 12:03:10 Set A/D encoding result=40 12:03:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:10 Set channel filter=0.000000e+000 result=40 12:03:10 Config A/D Result=40 12:03:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:10 Get A/D filter: -9.255963e+061 result=40 12:03:10 Get A/D value=-858993460 result=40 12:03:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:10 Aux= 12:03:10 Message to Camera, serial 87247 queued 12:03:19 Received message from Master: op=Shutter serial=87257 12:03:19 Shutter LASER close 12:03:19 Received message from Master: op=PointingHead serial=87261 12:03:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:03:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:03:20 Point started: ret=0 12:03:20 point_skyscan result=0 12:03:20 Check angles 12:03:20 SkyScan query 12:03:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 12:03:21 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 12:03:21 Check angles 12:03:21 SkyScan query 12:03:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 12:03:22 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 12:03:22 Check angles 12:03:22 SkyScan query 12:03:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.8<-18720 Statuses=0008 0009 12:03:23 Msec=1500 True Az=112.995 Ze=-100.8 Az status=0008 Ze status=0009 12:03:23 Check angles 12:03:23 SkyScan query 12:03:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 12:03:23 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 12:03:23 Check angles 12:03:23 SkyScan query 12:03:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 12:03:24 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 12:03:24 Check angles 12:03:24 SkyScan query 12:03:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.515<-14501 Statuses=0008 0009 12:03:25 Msec=3750 True Az=112.995 Ze=-37.515 Az status=0008 Ze status=0009 12:03:25 Check angles 12:03:25 SkyScan query 12:03:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.545<-13103 Statuses=0008 0009 12:03:26 Msec=4500 True Az=112.995 Ze=-16.545 Az status=0008 Ze status=0009 12:03:26 Check angles 12:03:26 SkyScan query 12:03:26 SkyScan query done: ret=0 az=112.995<-7533 ze=4.35<-11710 Statuses=0008 0009 12:03:26 Msec=5250 True Az=112.995 Ze=4.35 Az status=0008 Ze status=0009 12:03:26 Check angles 12:03:26 SkyScan query 12:03:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:03:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:03:27 Message to Master queued w/err=0: serial=87261 error=0 12:03:32 Received message from Master: op=Filter serial=87262 12:03:32 Color wheel filter change from 0 to 0 12:03:32 FLIGetFilterPos err=0 currentPosition=0 12:03:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:32 Filter is already there-color wheel unchanged 12:03:32 Received message from Master: op=Shutter serial=87263 12:03:32 Shutter LASER close 12:03:32 Received message from Camera: op=State serial=87265 12:03:32 GetSingleValue result=40 Value=cccccccc 12:03:32 SkyScan query 12:03:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:03:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:33 Parameters OK 12:03:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:33 Set A/D data flow result=40 12:03:33 Set A/D channel type result=40 12:03:33 Set A/D encoding result=40 12:03:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:33 Set channel filter=0.000000e+000 result=40 12:03:33 Config A/D Result=40 12:03:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:33 Get A/D filter: -9.255963e+061 result=40 12:03:33 Get A/D value=-858993460 result=40 12:03:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:33 Parameters OK 12:03:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:33 Set A/D data flow result=40 12:03:33 Set A/D channel type result=40 12:03:33 Set A/D encoding result=40 12:03:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:33 Set channel filter=0.000000e+000 result=40 12:03:33 Config A/D Result=40 12:03:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:33 Get A/D filter: -9.255963e+061 result=40 12:03:33 Get A/D value=-858993460 result=40 12:03:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:33 Aux= 12:03:33 Message to Camera, serial 87265 queued 12:03:38 Received message from Master: op=Identify serial=87266 [UTC 2019-3-3 12:03:50] 12:04:10 Received message from Master: op=PointingHead serial=87281 12:04:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:04:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:04:10 Point started: ret=0 12:04:10 point_skyscan result=0 12:04:11 Check angles 12:04:11 SkyScan query 12:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:04:11 Message to Master queued w/err=0: serial=87281 error=0 12:04:16 Received message from Master: op=Filter serial=87282 12:04:16 Color wheel filter change from 0 to 0 12:04:16 FLIGetFilterPos err=0 currentPosition=0 12:04:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:16 Filter is already there-color wheel unchanged 12:04:17 Received message from Master: op=Shutter serial=87283 12:04:17 Shutter LASER close 12:04:17 Received message from Camera: op=State serial=87285 12:04:17 GetSingleValue result=40 Value=cccccccc 12:04:17 SkyScan query 12:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:17 Parameters OK 12:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:17 Set A/D data flow result=40 12:04:17 Set A/D channel type result=40 12:04:17 Set A/D encoding result=40 12:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:17 Set channel filter=0.000000e+000 result=40 12:04:17 Config A/D Result=40 12:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:17 Get A/D filter: -9.255963e+061 result=40 12:04:17 Get A/D value=-858993460 result=40 12:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:17 Parameters OK 12:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:17 Set A/D data flow result=40 12:04:17 Set A/D channel type result=40 12:04:17 Set A/D encoding result=40 12:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:17 Set channel filter=0.000000e+000 result=40 12:04:17 Config A/D Result=40 12:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:17 Get A/D filter: -9.255963e+061 result=40 12:04:17 Get A/D value=-858993460 result=40 12:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:17 Aux= 12:04:17 Message to Camera, serial 87285 queued 12:04:54 Received message from Master: op=PointingHead serial=87298 12:04:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:04:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:04:54 Point started: ret=0 12:04:54 point_skyscan result=0 12:04:55 Check angles 12:04:55 SkyScan query 12:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:04:56 Message to Master queued w/err=0: serial=87298 error=0 12:05:01 Received message from Master: op=Filter serial=87299 12:05:01 Color wheel filter change from 0 to 0 12:05:01 FLIGetFilterPos err=0 currentPosition=0 12:05:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:01 Filter is already there-color wheel unchanged 12:05:01 Received message from Master: op=Shutter serial=87300 12:05:01 Shutter LASER close 12:05:01 Received message from Camera: op=State serial=87302 12:05:01 GetSingleValue result=40 Value=cccccccc 12:05:01 SkyScan query 12:05:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:05:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:02 Parameters OK 12:05:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:02 Set A/D data flow result=40 12:05:02 Set A/D channel type result=40 12:05:02 Set A/D encoding result=40 12:05:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:02 Set channel filter=0.000000e+000 result=40 12:05:02 Config A/D Result=40 12:05:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:02 Get A/D filter: -9.255963e+061 result=40 12:05:02 Get A/D value=-858993460 result=40 12:05:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:02 Parameters OK 12:05:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:02 Set A/D data flow result=40 12:05:02 Set A/D channel type result=40 12:05:02 Set A/D encoding result=40 12:05:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:02 Set channel filter=0.000000e+000 result=40 12:05:02 Config A/D Result=40 12:05:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:02 Get A/D filter: -9.255963e+061 result=40 12:05:02 Get A/D value=-858993460 result=40 12:05:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:02 Aux= 12:05:02 Message to Camera, serial 87302 queued 12:05:38 Received message from Master: op=PointingHead serial=87315 12:05:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:05:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:05:39 Point started: ret=0 12:05:39 point_skyscan result=0 12:05:40 Check angles 12:05:40 SkyScan query 12:05:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:05:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:05:40 Message to Master queued w/err=0: serial=87315 error=0 12:05:45 Received message from Master: op=Filter serial=87316 12:05:45 Color wheel filter change from 0 to 0 12:05:45 FLIGetFilterPos err=0 currentPosition=0 12:05:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:45 Filter is already there-color wheel unchanged 12:05:45 Received message from Master: op=Shutter serial=87317 12:05:45 Shutter LASER close 12:05:45 Received message from Camera: op=State serial=87319 12:05:45 GetSingleValue result=40 Value=cccccccc 12:05:45 SkyScan query 12:05:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:05:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:46 Parameters OK 12:05:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:46 Set A/D data flow result=40 12:05:46 Set A/D channel type result=40 12:05:46 Set A/D encoding result=40 12:05:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:46 Set channel filter=0.000000e+000 result=40 12:05:46 Config A/D Result=40 12:05:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:46 Get A/D filter: -9.255963e+061 result=40 12:05:46 Get A/D value=-858993460 result=40 12:05:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:46 Parameters OK 12:05:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:46 Set A/D data flow result=40 12:05:46 Set A/D channel type result=40 12:05:46 Set A/D encoding result=40 12:05:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:46 Set channel filter=0.000000e+000 result=40 12:05:46 Config A/D Result=40 12:05:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:46 Get A/D filter: -9.255963e+061 result=40 12:05:46 Get A/D value=-858993460 result=40 12:05:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:46 Aux= 12:05:46 Message to Camera, serial 87319 queued 12:06:23 Received message from Master: op=PointingHead serial=87332 12:06:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:06:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:06:23 Point started: ret=0 12:06:23 point_skyscan result=0 12:06:24 Check angles 12:06:24 SkyScan query 12:06:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 12:06:24 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 12:06:25 Check angles 12:06:25 SkyScan query 12:06:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 12:06:25 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 12:06:25 Check angles 12:06:25 SkyScan query 12:06:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 12:06:26 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 12:06:26 Check angles 12:06:26 SkyScan query 12:06:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 12:06:27 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 12:06:27 Check angles 12:06:27 SkyScan query 12:06:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 12:06:27 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 12:06:28 Check angles 12:06:28 SkyScan query 12:06:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.355<-20557 Statuses=0008 0009 12:06:28 Msec=3750 True Az=112.995 Ze=-128.355 Az status=0008 Ze status=0009 12:06:28 Check angles 12:06:28 SkyScan query 12:06:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.325<-21955 Statuses=0008 0009 12:06:29 Msec=4500 True Az=112.995 Ze=-149.325 Az status=0008 Ze status=0009 12:06:29 Check angles 12:06:29 SkyScan query 12:06:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 12:06:30 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 12:06:30 Check angles 12:06:30 SkyScan query 12:06:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:06:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:06:30 Message to Master queued w/err=0: serial=87332 error=0 12:06:35 Received message from Master: op=Filter serial=87333 12:06:35 Color wheel filter change from 0 to 0 12:06:35 FLIGetFilterPos err=0 currentPosition=0 12:06:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:35 Filter is already there-color wheel unchanged 12:06:36 Received message from Master: op=Shutter serial=87334 12:06:36 Shutter LASER open 12:06:36 Received message from Camera: op=State serial=87336 12:06:36 GetSingleValue result=40 Value=cccccccc 12:06:36 SkyScan query 12:06:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:06:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:36 Parameters OK 12:06:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:36 Set A/D data flow result=40 12:06:36 Set A/D channel type result=40 12:06:36 Set A/D encoding result=40 12:06:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:36 Set channel filter=0.000000e+000 result=40 12:06:36 Config A/D Result=40 12:06:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:36 Get A/D filter: -9.255963e+061 result=40 12:06:36 Get A/D value=-858993460 result=40 12:06:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:36 Parameters OK 12:06:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:36 Set A/D data flow result=40 12:06:36 Set A/D channel type result=40 12:06:36 Set A/D encoding result=40 12:06:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:36 Set channel filter=0.000000e+000 result=40 12:06:36 Config A/D Result=40 12:06:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:36 Get A/D filter: -9.255963e+061 result=40 12:06:36 Get A/D value=-858993460 result=40 12:06:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:36 Aux= 12:06:36 Message to Camera, serial 87336 queued 12:06:45 Received message from Master: op=Shutter serial=87346 12:06:45 Shutter LASER close 12:06:45 Received message from Master: op=PointingHead serial=87350 12:06:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:06:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:06:46 Point started: ret=0 12:06:46 point_skyscan result=0 12:06:47 Check angles 12:06:47 SkyScan query 12:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.13<-21542 Statuses=0008 0009 12:06:47 Msec=0 True Az=112.995 Ze=-143.13 Az status=0008 Ze status=0009 12:06:47 Check angles 12:06:47 SkyScan query 12:06:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.725<-20115 Statuses=0008 0009 12:06:48 Msec=750 True Az=112.995 Ze=-121.725 Az status=0008 Ze status=0009 12:06:48 Check angles 12:06:48 SkyScan query 12:06:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.35<-18690 Statuses=0008 0009 12:06:49 Msec=1500 True Az=112.995 Ze=-100.35 Az status=0008 Ze status=0009 12:06:49 Check angles 12:06:49 SkyScan query 12:06:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.395<-17293 Statuses=0008 0009 12:06:49 Msec=2250 True Az=112.995 Ze=-79.395 Az status=0008 Ze status=0009 12:06:50 Check angles 12:06:50 SkyScan query 12:06:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.99<-15866 Statuses=0008 0009 12:06:50 Msec=3000 True Az=112.995 Ze=-57.99 Az status=0008 Ze status=0009 12:06:50 Check angles 12:06:50 SkyScan query 12:06:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.035<-14469 Statuses=0008 0009 12:06:51 Msec=3750 True Az=112.995 Ze=-37.035 Az status=0008 Ze status=0009 12:06:51 Check angles 12:06:51 SkyScan query 12:06:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.065<-13071 Statuses=0008 0009 12:06:52 Msec=4500 True Az=112.995 Ze=-16.065 Az status=0008 Ze status=0009 12:06:52 Check angles 12:06:52 SkyScan query 12:06:52 SkyScan query done: ret=0 az=112.995<-7533 ze=5.025<-11665 Statuses=0008 0009 12:06:52 Msec=5250 True Az=112.995 Ze=5.025 Az status=0008 Ze status=0009 12:06:53 Check angles 12:06:53 SkyScan query 12:06:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:06:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:06:53 Message to Master queued w/err=0: serial=87350 error=0 12:06:58 Received message from Master: op=Filter serial=87351 12:06:58 Color wheel filter change from 0 to 0 12:06:58 FLIGetFilterPos err=0 currentPosition=0 12:06:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:58 Filter is already there-color wheel unchanged 12:06:58 Received message from Master: op=Shutter serial=87352 12:06:58 Shutter LASER close 12:06:59 Received message from Camera: op=State serial=87354 12:06:59 GetSingleValue result=40 Value=cccccccc 12:06:59 SkyScan query 12:06:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:06:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:59 Parameters OK 12:06:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:59 Set A/D data flow result=40 12:06:59 Set A/D channel type result=40 12:06:59 Set A/D encoding result=40 12:06:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:59 Set channel filter=0.000000e+000 result=40 12:06:59 Config A/D Result=40 12:06:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:59 Get A/D filter: -9.255963e+061 result=40 12:06:59 Get A/D value=-858993460 result=40 12:06:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:59 Parameters OK 12:06:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:59 Set A/D data flow result=40 12:06:59 Set A/D channel type result=40 12:06:59 Set A/D encoding result=40 12:06:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:59 Set channel filter=0.000000e+000 result=40 12:06:59 Config A/D Result=40 12:06:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:59 Get A/D filter: -9.255963e+061 result=40 12:06:59 Get A/D value=-858993460 result=40 12:06:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:59 Aux= 12:06:59 Message to Camera, serial 87354 queued 12:07:36 Received message from Master: op=PointingHead serial=87367 12:07:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:07:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:07:36 Point started: ret=0 12:07:36 point_skyscan result=0 12:07:37 Check angles 12:07:37 SkyScan query 12:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:07:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:07:38 Message to Master queued w/err=0: serial=87367 error=0 12:07:43 Received message from Master: op=Filter serial=87368 12:07:43 Color wheel filter change from 0 to 0 12:07:43 FLIGetFilterPos err=0 currentPosition=0 12:07:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:43 Filter is already there-color wheel unchanged 12:07:43 Received message from Master: op=Shutter serial=87369 12:07:43 Shutter LASER close 12:07:43 Received message from Camera: op=State serial=87371 12:07:43 GetSingleValue result=40 Value=cccccccc 12:07:43 SkyScan query 12:07:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:07:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:43 Parameters OK 12:07:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:43 Set A/D data flow result=40 12:07:43 Set A/D channel type result=40 12:07:43 Set A/D encoding result=40 12:07:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:43 Set channel filter=0.000000e+000 result=40 12:07:43 Config A/D Result=40 12:07:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:43 Get A/D filter: -9.255963e+061 result=40 12:07:43 Get A/D value=-858993460 result=40 12:07:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:43 Parameters OK 12:07:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:43 Set A/D data flow result=40 12:07:43 Set A/D channel type result=40 12:07:43 Set A/D encoding result=40 12:07:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:43 Set channel filter=0.000000e+000 result=40 12:07:43 Config A/D Result=40 12:07:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:43 Get A/D filter: -9.255963e+061 result=40 12:07:43 Get A/D value=-858993460 result=40 12:07:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:43 Aux= 12:07:43 Message to Camera, serial 87371 queued 12:08:20 Received message from Master: op=PointingHead serial=87384 12:08:20 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:08:20 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:08:21 Point started: ret=0 12:08:21 point_skyscan result=0 12:08:21 Check angles 12:08:21 SkyScan query 12:08:22 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 12:08:22 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 12:08:22 Check angles 12:08:22 SkyScan query 12:08:23 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.495<-12433 Statuses=0009 0008 12:08:23 Msec=750 True Az=153.495 Ze=-6.495 Az status=0009 Ze status=0008 12:08:23 Check angles 12:08:23 SkyScan query 12:08:23 SkyScan query done: ret=0 az=170.985<-11399 ze=-6.495<-12433 Statuses=0009 0008 12:08:23 Msec=1500 True Az=170.985 Ze=-6.495 Az status=0009 Ze status=0008 12:08:24 Check angles 12:08:24 SkyScan query 12:08:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:08:24 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:08:24 Message to Master queued w/err=0: serial=87384 error=0 12:08:29 Received message from Master: op=Filter serial=87385 12:08:29 Color wheel filter change from 0 to 0 12:08:29 FLIGetFilterPos err=0 currentPosition=0 12:08:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:29 Filter is already there-color wheel unchanged 12:08:29 Received message from Master: op=Shutter serial=87386 12:08:29 Shutter LASER close 12:08:29 Received message from Camera: op=State serial=87388 12:08:29 GetSingleValue result=40 Value=cccccccc 12:08:29 SkyScan query 12:08:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:08:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:30 Parameters OK 12:08:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:30 Set A/D data flow result=40 12:08:30 Set A/D channel type result=40 12:08:30 Set A/D encoding result=40 12:08:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:30 Set channel filter=0.000000e+000 result=40 12:08:30 Config A/D Result=40 12:08:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:30 Get A/D filter: -9.255963e+061 result=40 12:08:30 Get A/D value=-858993460 result=40 12:08:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:30 Parameters OK 12:08:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:30 Set A/D data flow result=40 12:08:30 Set A/D channel type result=40 12:08:30 Set A/D encoding result=40 12:08:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:30 Set channel filter=0.000000e+000 result=40 12:08:30 Config A/D Result=40 12:08:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:30 Get A/D filter: -9.255963e+061 result=40 12:08:30 Get A/D value=-858993460 result=40 12:08:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:30 Aux= 12:08:30 Message to Camera, serial 87388 queued 12:09:07 Received message from Master: op=PointingHead serial=87401 12:09:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:09:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:09:07 Point started: ret=0 12:09:07 point_skyscan result=0 12:09:08 Check angles 12:09:08 SkyScan query 12:09:08 SkyScan query done: ret=0 az=153.12<-10208 ze=6.51<-11566 Statuses=0009 0008 12:09:08 Msec=0 True Az=153.12 Ze=6.51 Az status=0009 Ze status=0008 12:09:09 Check angles 12:09:09 SkyScan query 12:09:09 SkyScan query done: ret=0 az=135.69<-9046 ze=6.495<-11567 Statuses=0009 0008 12:09:09 Msec=750 True Az=135.69 Ze=6.495 Az status=0009 Ze status=0008 12:09:09 Check angles 12:09:09 SkyScan query 12:09:10 SkyScan query done: ret=0 az=118.14<-7876 ze=6.495<-11567 Statuses=0009 0008 12:09:10 Msec=1500 True Az=118.14 Ze=6.495 Az status=0009 Ze status=0008 12:09:10 Check angles 12:09:10 SkyScan query 12:09:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:09:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:09:11 Message to Master queued w/err=0: serial=87401 error=0 12:09:16 Received message from Master: op=Filter serial=87402 12:09:16 Color wheel filter change from 0 to 0 12:09:16 FLIGetFilterPos err=0 currentPosition=0 12:09:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:16 Filter is already there-color wheel unchanged 12:09:16 Received message from Master: op=Shutter serial=87403 12:09:16 Shutter LASER close 12:09:16 Received message from Camera: op=State serial=87405 12:09:16 GetSingleValue result=40 Value=cccccccc 12:09:16 SkyScan query 12:09:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:09:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:16 Parameters OK 12:09:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:16 Set A/D data flow result=40 12:09:16 Set A/D channel type result=40 12:09:16 Set A/D encoding result=40 12:09:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:16 Set channel filter=0.000000e+000 result=40 12:09:16 Config A/D Result=40 12:09:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:16 Get A/D filter: -9.255963e+061 result=40 12:09:16 Get A/D value=-858993460 result=40 12:09:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:16 Parameters OK 12:09:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:16 Set A/D data flow result=40 12:09:16 Set A/D channel type result=40 12:09:16 Set A/D encoding result=40 12:09:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:16 Set channel filter=0.000000e+000 result=40 12:09:16 Config A/D Result=40 12:09:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:16 Get A/D filter: -9.255963e+061 result=40 12:09:16 Get A/D value=-858993460 result=40 12:09:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:16 Aux= 12:09:16 Message to Camera, serial 87405 queued 12:09:53 Received message from Master: op=PointingHead serial=87418 12:09:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:09:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:09:54 Point started: ret=0 12:09:54 point_skyscan result=0 12:09:54 Check angles 12:09:54 SkyScan query 12:09:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 12:09:55 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 12:09:55 Check angles 12:09:55 SkyScan query 12:09:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 12:09:56 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 12:09:56 Check angles 12:09:56 SkyScan query 12:09:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 12:09:57 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 12:09:57 Check angles 12:09:57 SkyScan query 12:09:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 12:09:57 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 12:09:57 Check angles 12:09:57 SkyScan query 12:09:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.595<-19173 Statuses=0008 0009 12:09:58 Msec=3000 True Az=112.995 Ze=-107.595 Az status=0008 Ze status=0009 12:09:58 Check angles 12:09:58 SkyScan query 12:09:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.955<-20597 Statuses=0008 0009 12:09:59 Msec=3750 True Az=112.995 Ze=-128.955 Az status=0008 Ze status=0009 12:09:59 Check angles 12:09:59 SkyScan query 12:10:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 12:10:00 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 12:10:00 Check angles 12:10:00 SkyScan query 12:10:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 12:10:00 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 12:10:00 Check angles 12:10:00 SkyScan query 12:10:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:10:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:10:01 Message to Master queued w/err=0: serial=87418 error=0 12:10:06 Received message from Master: op=Filter serial=87419 12:10:06 Color wheel filter change from 0 to 0 12:10:06 FLIGetFilterPos err=0 currentPosition=0 12:10:06 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:06 Filter is already there-color wheel unchanged 12:10:06 Received message from Master: op=Shutter serial=87420 12:10:06 Shutter LASER open 12:10:06 Received message from Camera: op=State serial=87422 12:10:06 GetSingleValue result=40 Value=cccccccc 12:10:06 SkyScan query 12:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:10:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:07 Parameters OK 12:10:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:07 Set A/D data flow result=40 12:10:07 Set A/D channel type result=40 12:10:07 Set A/D encoding result=40 12:10:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:07 Set channel filter=0.000000e+000 result=40 12:10:07 Config A/D Result=40 12:10:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:07 Get A/D filter: -9.255963e+061 result=40 12:10:07 Get A/D value=-858993460 result=40 12:10:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:07 Parameters OK 12:10:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:07 Set A/D data flow result=40 12:10:07 Set A/D channel type result=40 12:10:07 Set A/D encoding result=40 12:10:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:07 Set channel filter=0.000000e+000 result=40 12:10:07 Config A/D Result=40 12:10:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:07 Get A/D filter: -9.255963e+061 result=40 12:10:07 Get A/D value=-858993460 result=40 12:10:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:10:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:10:07 Aux= 12:10:07 Message to Camera, serial 87422 queued 12:10:15 Received message from Master: op=Shutter serial=87432 12:10:15 Shutter LASER close 12:10:16 Received message from Master: op=PointingHead serial=87436 12:10:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:10:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:10:16 Point started: ret=0 12:10:16 point_skyscan result=0 12:10:17 Check angles 12:10:17 SkyScan query 12:10:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 12:10:18 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 12:10:18 Check angles 12:10:18 SkyScan query 12:10:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 12:10:18 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 12:10:18 Check angles 12:10:18 SkyScan query 12:10:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.25<-18750 Statuses=0008 0009 12:10:19 Msec=1500 True Az=112.995 Ze=-101.25 Az status=0008 Ze status=0009 12:10:19 Check angles 12:10:19 SkyScan query 12:10:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 12:10:20 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 12:10:20 Check angles 12:10:20 SkyScan query 12:10:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.355<-15957 Statuses=0008 0009 12:10:21 Msec=3000 True Az=112.995 Ze=-59.355 Az status=0008 Ze status=0009 12:10:21 Check angles 12:10:21 SkyScan query 12:10:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.935<-14529 Statuses=0008 0009 12:10:21 Msec=3750 True Az=112.995 Ze=-37.935 Az status=0008 Ze status=0009 12:10:21 Check angles 12:10:21 SkyScan query 12:10:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.545<-13103 Statuses=0008 0009 12:10:22 Msec=4500 True Az=112.995 Ze=-16.545 Az status=0008 Ze status=0009 12:10:22 Check angles 12:10:22 SkyScan query 12:10:23 SkyScan query done: ret=0 az=112.995<-7533 ze=4.335<-11711 Statuses=0008 0009 12:10:23 Msec=5250 True Az=112.995 Ze=4.335 Az status=0008 Ze status=0009 12:10:23 Check angles 12:10:23 SkyScan query 12:10:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:10:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:10:24 Message to Master queued w/err=0: serial=87436 error=0 12:10:29 Received message from Master: op=Filter serial=87437 12:10:29 Color wheel filter change from 0 to 0 12:10:29 FLIGetFilterPos err=0 currentPosition=0 12:10:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:29 Filter is already there-color wheel unchanged 12:10:29 Received message from Master: op=Shutter serial=87438 12:10:29 Shutter LASER close 12:10:29 Received message from Camera: op=State serial=87440 12:10:29 GetSingleValue result=40 Value=cccccccc 12:10:29 SkyScan query 12:10:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:10:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:29 Parameters OK 12:10:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:29 Set A/D data flow result=40 12:10:29 Set A/D channel type result=40 12:10:29 Set A/D encoding result=40 12:10:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:29 Set channel filter=0.000000e+000 result=40 12:10:29 Config A/D Result=40 12:10:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:29 Get A/D filter: -9.255963e+061 result=40 12:10:29 Get A/D value=-858993460 result=40 12:10:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:29 Parameters OK 12:10:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:29 Set A/D data flow result=40 12:10:29 Set A/D channel type result=40 12:10:29 Set A/D encoding result=40 12:10:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:29 Set channel filter=0.000000e+000 result=40 12:10:29 Config A/D Result=40 12:10:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:29 Get A/D filter: -9.255963e+061 result=40 12:10:29 Get A/D value=-858993460 result=40 12:10:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:10:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:10:29 Aux= 12:10:29 Message to Camera, serial 87440 queued 12:11:06 Received message from Master: op=PointingHead serial=87453 12:11:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:11:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:11:07 Point started: ret=0 12:11:07 point_skyscan result=0 12:11:07 Check angles 12:11:07 SkyScan query 12:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:11:08 Message to Master queued w/err=0: serial=87453 error=0 12:11:13 Received message from Master: op=Filter serial=87454 12:11:13 Color wheel filter change from 0 to 0 12:11:13 FLIGetFilterPos err=0 currentPosition=0 12:11:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:13 Filter is already there-color wheel unchanged 12:11:13 Received message from Master: op=Shutter serial=87455 12:11:13 Shutter LASER close 12:11:13 Received message from Camera: op=State serial=87457 12:11:13 GetSingleValue result=40 Value=cccccccc 12:11:13 SkyScan query 12:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:14 Parameters OK 12:11:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:14 Set A/D data flow result=40 12:11:14 Set A/D channel type result=40 12:11:14 Set A/D encoding result=40 12:11:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:14 Set channel filter=0.000000e+000 result=40 12:11:14 Config A/D Result=40 12:11:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:14 Get A/D filter: -9.255963e+061 result=40 12:11:14 Get A/D value=-858993460 result=40 12:11:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:14 Parameters OK 12:11:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:14 Set A/D data flow result=40 12:11:14 Set A/D channel type result=40 12:11:14 Set A/D encoding result=40 12:11:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:14 Set channel filter=0.000000e+000 result=40 12:11:14 Config A/D Result=40 12:11:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:14 Get A/D filter: -9.255963e+061 result=40 12:11:14 Get A/D value=-858993460 result=40 12:11:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:14 Aux= 12:11:14 Message to Camera, serial 87457 queued 12:11:51 Received message from Master: op=PointingHead serial=87470 12:11:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:11:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:11:51 Point started: ret=0 12:11:51 point_skyscan result=0 12:11:52 Check angles 12:11:52 SkyScan query 12:11:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:11:52 Message to Master queued w/err=0: serial=87470 error=0 12:11:57 Received message from Master: op=Filter serial=87471 12:11:57 Color wheel filter change from 0 to 0 12:11:57 FLIGetFilterPos err=0 currentPosition=0 12:11:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:57 Filter is already there-color wheel unchanged 12:11:57 Received message from Master: op=Shutter serial=87472 12:11:57 Shutter LASER close 12:11:58 Received message from Camera: op=State serial=87474 12:11:58 GetSingleValue result=40 Value=cccccccc 12:11:58 SkyScan query 12:11:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:58 Parameters OK 12:11:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:58 Set A/D data flow result=40 12:11:58 Set A/D channel type result=40 12:11:58 Set A/D encoding result=40 12:11:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:58 Set channel filter=0.000000e+000 result=40 12:11:58 Config A/D Result=40 12:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:58 Get A/D filter: -9.255963e+061 result=40 12:11:58 Get A/D value=-858993460 result=40 12:11:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:58 Parameters OK 12:11:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:58 Set A/D data flow result=40 12:11:58 Set A/D channel type result=40 12:11:58 Set A/D encoding result=40 12:11:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:58 Set channel filter=0.000000e+000 result=40 12:11:58 Config A/D Result=40 12:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:58 Get A/D filter: -9.255963e+061 result=40 12:11:58 Get A/D value=-858993460 result=40 12:11:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:58 Aux= 12:11:58 Message to Camera, serial 87474 queued 12:12:35 Received message from Master: op=PointingHead serial=87487 12:12:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:12:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:12:35 Point started: ret=0 12:12:35 point_skyscan result=0 12:12:36 Check angles 12:12:36 SkyScan query 12:12:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:12:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:12:37 Message to Master queued w/err=0: serial=87487 error=0 12:12:42 Received message from Master: op=Filter serial=87488 12:12:42 Color wheel filter change from 0 to 0 12:12:42 FLIGetFilterPos err=0 currentPosition=0 12:12:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:42 Filter is already there-color wheel unchanged 12:12:42 Received message from Master: op=Shutter serial=87489 12:12:42 Shutter LASER close 12:12:42 Received message from Camera: op=State serial=87491 12:12:42 GetSingleValue result=40 Value=cccccccc 12:12:42 SkyScan query 12:12:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:12:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:42 Parameters OK 12:12:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:42 Set A/D data flow result=40 12:12:42 Set A/D channel type result=40 12:12:42 Set A/D encoding result=40 12:12:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:42 Set channel filter=0.000000e+000 result=40 12:12:42 Config A/D Result=40 12:12:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:42 Get A/D filter: -9.255963e+061 result=40 12:12:42 Get A/D value=-858993460 result=40 12:12:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:42 Parameters OK 12:12:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:42 Set A/D data flow result=40 12:12:42 Set A/D channel type result=40 12:12:42 Set A/D encoding result=40 12:12:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:42 Set channel filter=0.000000e+000 result=40 12:12:42 Config A/D Result=40 12:12:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:42 Get A/D filter: -9.255963e+061 result=40 12:12:42 Get A/D value=-858993460 result=40 12:12:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:42 Aux= 12:12:42 Message to Camera, serial 87491 queued 12:13:19 Received message from Master: op=PointingHead serial=87504 12:13:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:13:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:13:20 Point started: ret=0 12:13:20 point_skyscan result=0 12:13:20 Check angles 12:13:20 SkyScan query 12:13:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 12:13:21 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 12:13:21 Check angles 12:13:21 SkyScan query 12:13:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 12:13:22 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 12:13:22 Check angles 12:13:22 SkyScan query 12:13:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.52<-16368 Statuses=0008 0009 12:13:22 Msec=1500 True Az=112.995 Ze=-65.52 Az status=0008 Ze status=0009 12:13:23 Check angles 12:13:23 SkyScan query 12:13:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.895<-17793 Statuses=0008 0009 12:13:23 Msec=2250 True Az=112.995 Ze=-86.895 Az status=0008 Ze status=0009 12:13:23 Check angles 12:13:23 SkyScan query 12:13:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 12:13:24 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 12:13:24 Check angles 12:13:24 SkyScan query 12:13:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.79<-20586 Statuses=0008 0009 12:13:25 Msec=3750 True Az=112.995 Ze=-128.79 Az status=0008 Ze status=0009 12:13:25 Check angles 12:13:25 SkyScan query 12:13:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 12:13:25 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 12:13:26 Check angles 12:13:26 SkyScan query 12:13:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.67<-23378 Statuses=0008 0009 12:13:26 Msec=5250 True Az=112.995 Ze=-170.67 Az status=0008 Ze status=0009 12:13:26 Check angles 12:13:26 SkyScan query 12:13:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:13:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:13:27 Message to Master queued w/err=0: serial=87504 error=0 12:13:32 Received message from Master: op=Filter serial=87505 12:13:32 Color wheel filter change from 0 to 0 12:13:32 FLIGetFilterPos err=0 currentPosition=0 12:13:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:32 Filter is already there-color wheel unchanged 12:13:32 Received message from Master: op=Shutter serial=87506 12:13:32 Shutter LASER open 12:13:32 Received message from Camera: op=State serial=87508 12:13:32 GetSingleValue result=40 Value=cccccccc 12:13:32 SkyScan query 12:13:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:13:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:33 Parameters OK 12:13:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:33 Set A/D data flow result=40 12:13:33 Set A/D channel type result=40 12:13:33 Set A/D encoding result=40 12:13:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:33 Set channel filter=0.000000e+000 result=40 12:13:33 Config A/D Result=40 12:13:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:33 Get A/D filter: -9.255963e+061 result=40 12:13:33 Get A/D value=-858993460 result=40 12:13:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:33 Parameters OK 12:13:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:33 Set A/D data flow result=40 12:13:33 Set A/D channel type result=40 12:13:33 Set A/D encoding result=40 12:13:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:33 Set channel filter=0.000000e+000 result=40 12:13:33 Config A/D Result=40 12:13:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:33 Get A/D filter: -9.255963e+061 result=40 12:13:33 Get A/D value=-858993460 result=40 12:13:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:33 Aux= 12:13:33 Message to Camera, serial 87508 queued 12:13:41 Received message from Master: op=Shutter serial=87518 12:13:41 Shutter LASER close 12:13:42 Received message from Master: op=PointingHead serial=87522 12:13:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:13:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:13:42 Point started: ret=0 12:13:42 point_skyscan result=0 12:13:43 Check angles 12:13:43 SkyScan query 12:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 12:13:44 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 12:13:44 Check angles 12:13:44 SkyScan query 12:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.46<-20164 Statuses=0008 0009 12:13:44 Msec=750 True Az=112.995 Ze=-122.46 Az status=0008 Ze status=0009 12:13:45 Check angles 12:13:45 SkyScan query 12:13:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.49<-18766 Statuses=0008 0009 12:13:45 Msec=1500 True Az=112.995 Ze=-101.49 Az status=0008 Ze status=0009 12:13:45 Check angles 12:13:45 SkyScan query 12:13:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.52<-17368 Statuses=0008 0009 12:13:46 Msec=2250 True Az=112.995 Ze=-80.52 Az status=0008 Ze status=0009 12:13:46 Check angles 12:13:46 SkyScan query 12:13:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.58<-15972 Statuses=0008 0009 12:13:47 Msec=3000 True Az=112.995 Ze=-59.58 Az status=0008 Ze status=0009 12:13:47 Check angles 12:13:47 SkyScan query 12:13:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.625<-14575 Statuses=0008 0009 12:13:47 Msec=3750 True Az=112.995 Ze=-38.625 Az status=0008 Ze status=0009 12:13:48 Check angles 12:13:48 SkyScan query 12:13:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.67<-13178 Statuses=0008 0009 12:13:48 Msec=4500 True Az=112.995 Ze=-17.67 Az status=0008 Ze status=0009 12:13:48 Check angles 12:13:48 SkyScan query 12:13:49 SkyScan query done: ret=0 az=112.995<-7533 ze=3.285<-11781 Statuses=0008 0009 12:13:49 Msec=5250 True Az=112.995 Ze=3.285 Az status=0008 Ze status=0009 12:13:49 Check angles 12:13:49 SkyScan query 12:13:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:13:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:13:50 Message to Master queued w/err=0: serial=87522 error=0 12:13:55 Received message from Master: op=Filter serial=87523 12:13:55 Color wheel filter change from 0 to 0 12:13:55 FLIGetFilterPos err=0 currentPosition=0 12:13:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:55 Filter is already there-color wheel unchanged 12:13:55 Received message from Master: op=Shutter serial=87524 12:13:55 Shutter LASER close 12:13:55 Received message from Camera: op=State serial=87526 12:13:55 GetSingleValue result=40 Value=cccccccc 12:13:55 SkyScan query 12:13:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:13:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:56 Parameters OK 12:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:56 Set A/D data flow result=40 12:13:56 Set A/D channel type result=40 12:13:56 Set A/D encoding result=40 12:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:56 Set channel filter=0.000000e+000 result=40 12:13:56 Config A/D Result=40 12:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:56 Get A/D filter: -9.255963e+061 result=40 12:13:56 Get A/D value=-858993460 result=40 12:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:56 Parameters OK 12:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:56 Set A/D data flow result=40 12:13:56 Set A/D channel type result=40 12:13:56 Set A/D encoding result=40 12:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:56 Set channel filter=0.000000e+000 result=40 12:13:56 Config A/D Result=40 12:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:56 Get A/D filter: -9.255963e+061 result=40 12:13:56 Get A/D value=-858993460 result=40 12:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:56 Aux= 12:13:56 Message to Camera, serial 87526 queued 12:14:32 Received message from Master: op=PointingHead serial=87539 12:14:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:14:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:14:33 Point started: ret=0 12:14:33 point_skyscan result=0 12:14:34 Check angles 12:14:34 SkyScan query 12:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:14:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:14:34 Message to Master queued w/err=0: serial=87539 error=0 12:14:39 Received message from Master: op=Filter serial=87540 12:14:39 Color wheel filter change from 0 to 0 [UTC 2019-3-3 12:14:39] 12:14:39 FLIGetFilterPos err=0 currentPosition=0 12:14:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:39 Filter is already there-color wheel unchanged 12:14:39 Received message from Master: op=Shutter serial=87541 12:14:39 Shutter LASER close 12:14:39 Received message from Camera: op=State serial=87543 12:14:39 GetSingleValue result=40 Value=cccccccc 12:14:39 SkyScan query 12:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:14:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:40 Parameters OK 12:14:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:40 Set A/D data flow result=40 12:14:40 Set A/D channel type result=40 12:14:40 Set A/D encoding result=40 12:14:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:40 Set channel filter=0.000000e+000 result=40 12:14:40 Config A/D Result=40 12:14:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:40 Get A/D filter: -9.255963e+061 result=40 12:14:40 Get A/D value=-858993460 result=40 12:14:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:40 Parameters OK 12:14:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:40 Set A/D data flow result=40 12:14:40 Set A/D channel type result=40 12:14:40 Set A/D encoding result=40 12:14:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:40 Set channel filter=0.000000e+000 result=40 12:14:40 Config A/D Result=40 12:14:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:40 Get A/D filter: -9.255963e+061 result=40 12:14:40 Get A/D value=-858993460 result=40 12:14:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:40 Aux= 12:14:40 Message to Camera, serial 87543 queued 12:15:17 Received message from Master: op=PointingHead serial=87556 12:15:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:15:17 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:15:17 Point started: ret=0 12:15:17 point_skyscan result=0 12:15:18 Check angles 12:15:18 SkyScan query 12:15:18 SkyScan query done: ret=0 az=135.78<-9052 ze=-6.51<-12434 Statuses=0009 0008 12:15:18 Msec=0 True Az=135.78 Ze=-6.51 Az status=0009 Ze status=0008 12:15:19 Check angles 12:15:19 SkyScan query 12:15:19 SkyScan query done: ret=0 az=153.18<-10212 ze=-6.495<-12433 Statuses=0009 0008 12:15:19 Msec=750 True Az=153.18 Ze=-6.495 Az status=0009 Ze status=0008 12:15:19 Check angles 12:15:19 SkyScan query 12:15:20 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 12:15:20 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 12:15:20 Check angles 12:15:20 SkyScan query 12:15:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:15:21 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:15:21 Message to Master queued w/err=0: serial=87556 error=0 12:15:26 Received message from Master: op=Filter serial=87557 12:15:26 Color wheel filter change from 0 to 0 12:15:26 FLIGetFilterPos err=0 currentPosition=0 12:15:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:26 Filter is already there-color wheel unchanged 12:15:26 Received message from Master: op=Shutter serial=87558 12:15:26 Shutter LASER close 12:15:26 Received message from Camera: op=State serial=87560 12:15:26 GetSingleValue result=40 Value=cccccccc 12:15:26 SkyScan query 12:15:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:15:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:27 Parameters OK 12:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:27 Set A/D data flow result=40 12:15:27 Set A/D channel type result=40 12:15:27 Set A/D encoding result=40 12:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:27 Set channel filter=0.000000e+000 result=40 12:15:27 Config A/D Result=40 12:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:27 Get A/D filter: -9.255963e+061 result=40 12:15:27 Get A/D value=-858993460 result=40 12:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:27 Parameters OK 12:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:27 Set A/D data flow result=40 12:15:27 Set A/D channel type result=40 12:15:27 Set A/D encoding result=40 12:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:27 Set channel filter=0.000000e+000 result=40 12:15:27 Config A/D Result=40 12:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:27 Get A/D filter: -9.255963e+061 result=40 12:15:27 Get A/D value=-858993460 result=40 12:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:27 Aux= 12:15:27 Message to Camera, serial 87560 queued 12:16:03 Received message from Master: op=PointingHead serial=87573 12:16:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:16:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:16:04 Point started: ret=0 12:16:04 point_skyscan result=0 12:16:04 Check angles 12:16:04 SkyScan query 12:16:05 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 12:16:05 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 12:16:05 Check angles 12:16:05 SkyScan query 12:16:06 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 12:16:06 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 12:16:06 Check angles 12:16:06 SkyScan query 12:16:07 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 12:16:07 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 12:16:07 Check angles 12:16:07 SkyScan query 12:16:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:16:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:16:07 Message to Master queued w/err=0: serial=87573 error=0 12:16:12 Received message from Master: op=Filter serial=87574 12:16:12 Color wheel filter change from 0 to 0 12:16:12 FLIGetFilterPos err=0 currentPosition=0 12:16:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:12 Filter is already there-color wheel unchanged 12:16:12 Received message from Master: op=Shutter serial=87575 12:16:12 Shutter LASER close 12:16:13 Received message from Camera: op=State serial=87577 12:16:13 GetSingleValue result=40 Value=cccccccc 12:16:13 SkyScan query 12:16:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:16:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:13 Parameters OK 12:16:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:13 Set A/D data flow result=40 12:16:13 Set A/D channel type result=40 12:16:13 Set A/D encoding result=40 12:16:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:13 Set channel filter=0.000000e+000 result=40 12:16:13 Config A/D Result=40 12:16:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:13 Get A/D filter: -9.255963e+061 result=40 12:16:13 Get A/D value=-858993460 result=40 12:16:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:13 Parameters OK 12:16:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:13 Set A/D data flow result=40 12:16:13 Set A/D channel type result=40 12:16:13 Set A/D encoding result=40 12:16:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:13 Set channel filter=0.000000e+000 result=40 12:16:13 Config A/D Result=40 12:16:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:13 Get A/D filter: -9.255963e+061 result=40 12:16:13 Get A/D value=-858993460 result=40 12:16:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:13 Aux= 12:16:13 Message to Camera, serial 87577 queued 12:16:50 Received message from Master: op=PointingHead serial=87590 12:16:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:16:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:16:50 Point started: ret=0 12:16:50 point_skyscan result=0 12:16:51 Check angles 12:16:51 SkyScan query 12:16:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 12:16:52 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 12:16:52 Check angles 12:16:52 SkyScan query 12:16:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 12:16:52 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 12:16:53 Check angles 12:16:53 SkyScan query 12:16:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 12:16:53 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 12:16:53 Check angles 12:16:53 SkyScan query 12:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.835<-17789 Statuses=0008 0009 12:16:54 Msec=2250 True Az=112.995 Ze=-86.835 Az status=0008 Ze status=0009 12:16:54 Check angles 12:16:54 SkyScan query 12:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.805<-19187 Statuses=0008 0009 12:16:55 Msec=3000 True Az=112.995 Ze=-107.805 Az status=0008 Ze status=0009 12:16:55 Check angles 12:16:55 SkyScan query 12:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.73<-20582 Statuses=0008 0009 12:16:55 Msec=3750 True Az=112.995 Ze=-128.73 Az status=0008 Ze status=0009 12:16:56 Check angles 12:16:56 SkyScan query 12:16:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.135<-22009 Statuses=0008 0009 12:16:56 Msec=4500 True Az=112.995 Ze=-150.135 Az status=0008 Ze status=0009 12:16:56 Check angles 12:16:56 SkyScan query 12:16:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.315<-23421 Statuses=0008 0009 12:16:57 Msec=5250 True Az=112.995 Ze=-171.315 Az status=0008 Ze status=0009 12:16:57 Check angles 12:16:57 SkyScan query 12:16:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:16:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:16:58 Message to Master queued w/err=0: serial=87590 error=0 12:17:03 Received message from Master: op=Filter serial=87591 12:17:03 Color wheel filter change from 0 to 0 12:17:03 FLIGetFilterPos err=0 currentPosition=0 12:17:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:03 Filter is already there-color wheel unchanged 12:17:03 Received message from Master: op=Shutter serial=87592 12:17:03 Shutter LASER open 12:17:03 Received message from Camera: op=State serial=87594 12:17:03 GetSingleValue result=40 Value=cccccccc 12:17:03 SkyScan query 12:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:17:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:04 Parameters OK 12:17:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:04 Set A/D data flow result=40 12:17:04 Set A/D channel type result=40 12:17:04 Set A/D encoding result=40 12:17:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:04 Set channel filter=0.000000e+000 result=40 12:17:04 Config A/D Result=40 12:17:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:04 Get A/D filter: -9.255963e+061 result=40 12:17:04 Get A/D value=-858993460 result=40 12:17:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:04 Parameters OK 12:17:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:04 Set A/D data flow result=40 12:17:04 Set A/D channel type result=40 12:17:04 Set A/D encoding result=40 12:17:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:04 Set channel filter=0.000000e+000 result=40 12:17:04 Config A/D Result=40 12:17:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:04 Get A/D filter: -9.255963e+061 result=40 12:17:04 Get A/D value=-858993460 result=40 12:17:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:04 Aux= 12:17:04 Message to Camera, serial 87594 queued 12:17:12 Received message from Master: op=Shutter serial=87604 12:17:12 Shutter LASER close 12:17:12 Received message from Master: op=PointingHead serial=87608 12:17:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:17:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:17:13 Point started: ret=0 12:17:13 point_skyscan result=0 12:17:14 Check angles 12:17:14 SkyScan query 12:17:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 12:17:14 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 12:17:14 Check angles 12:17:14 SkyScan query 12:17:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 12:17:15 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 12:17:15 Check angles 12:17:15 SkyScan query 12:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 12:17:16 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 12:17:16 Check angles 12:17:16 SkyScan query 12:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 12:17:16 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 12:17:17 Check angles 12:17:17 SkyScan query 12:17:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.755<-15917 Statuses=0008 0009 12:17:17 Msec=3000 True Az=112.995 Ze=-58.755 Az status=0008 Ze status=0009 12:17:17 Check angles 12:17:17 SkyScan query 12:17:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.785<-14519 Statuses=0008 0009 12:17:18 Msec=3750 True Az=112.995 Ze=-37.785 Az status=0008 Ze status=0009 12:17:18 Check angles 12:17:18 SkyScan query 12:17:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.815<-13121 Statuses=0008 0009 12:17:19 Msec=4500 True Az=112.995 Ze=-16.815 Az status=0008 Ze status=0009 12:17:19 Check angles 12:17:19 SkyScan query 12:17:19 SkyScan query done: ret=0 az=112.995<-7533 ze=4.11<-11726 Statuses=0008 0009 12:17:19 Msec=5250 True Az=112.995 Ze=4.11 Az status=0008 Ze status=0009 12:17:20 Check angles 12:17:20 SkyScan query 12:17:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:17:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:17:20 Message to Master queued w/err=0: serial=87608 error=0 12:17:25 Received message from Master: op=Filter serial=87609 12:17:25 Color wheel filter change from 0 to 0 12:17:25 FLIGetFilterPos err=0 currentPosition=0 12:17:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:25 Filter is already there-color wheel unchanged 12:17:25 Received message from Master: op=Shutter serial=87610 12:17:25 Shutter LASER close 12:17:25 Received message from Camera: op=State serial=87612 12:17:25 GetSingleValue result=40 Value=cccccccc 12:17:25 SkyScan query 12:17:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:17:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:26 Parameters OK 12:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:26 Set A/D data flow result=40 12:17:26 Set A/D channel type result=40 12:17:26 Set A/D encoding result=40 12:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:26 Set channel filter=0.000000e+000 result=40 12:17:26 Config A/D Result=40 12:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:26 Get A/D filter: -9.255963e+061 result=40 12:17:26 Get A/D value=-858993460 result=40 12:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:26 Parameters OK 12:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:26 Set A/D data flow result=40 12:17:26 Set A/D channel type result=40 12:17:26 Set A/D encoding result=40 12:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:26 Set channel filter=0.000000e+000 result=40 12:17:26 Config A/D Result=40 12:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:26 Get A/D filter: -9.255963e+061 result=40 12:17:26 Get A/D value=-858993460 result=40 12:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:26 Aux= 12:17:26 Message to Camera, serial 87612 queued 12:18:03 Received message from Master: op=PointingHead serial=87625 12:18:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:18:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:18:03 Point started: ret=0 12:18:03 point_skyscan result=0 12:18:04 Check angles 12:18:04 SkyScan query 12:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:18:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:18:05 Message to Master queued w/err=0: serial=87625 error=0 12:18:10 Received message from Master: op=Filter serial=87626 12:18:10 Color wheel filter change from 0 to 0 12:18:10 FLIGetFilterPos err=0 currentPosition=0 12:18:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:10 Filter is already there-color wheel unchanged 12:18:10 Received message from Master: op=Shutter serial=87627 12:18:10 Shutter LASER close 12:18:10 Received message from Camera: op=State serial=87629 12:18:10 GetSingleValue result=40 Value=cccccccc 12:18:10 SkyScan query 12:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:18:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:10 Parameters OK 12:18:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:10 Set A/D data flow result=40 12:18:10 Set A/D channel type result=40 12:18:10 Set A/D encoding result=40 12:18:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:10 Set channel filter=0.000000e+000 result=40 12:18:10 Config A/D Result=40 12:18:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:10 Get A/D filter: -9.255963e+061 result=40 12:18:10 Get A/D value=-858993460 result=40 12:18:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:10 Parameters OK 12:18:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:10 Set A/D data flow result=40 12:18:10 Set A/D channel type result=40 12:18:10 Set A/D encoding result=40 12:18:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:10 Set channel filter=0.000000e+000 result=40 12:18:10 Config A/D Result=40 12:18:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:10 Get A/D filter: -9.255963e+061 result=40 12:18:10 Get A/D value=-858993460 result=40 12:18:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:10 Aux= 12:18:10 Message to Camera, serial 87629 queued 12:18:47 Received message from Master: op=PointingHead serial=87642 12:18:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:18:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:18:48 Point started: ret=0 12:18:48 point_skyscan result=0 12:18:48 Check angles 12:18:48 SkyScan query 12:18:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:18:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:18:49 Message to Master queued w/err=0: serial=87642 error=0 12:18:54 Received message from Master: op=Filter serial=87643 12:18:54 Color wheel filter change from 0 to 0 12:18:54 FLIGetFilterPos err=0 currentPosition=0 12:18:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:54 Filter is already there-color wheel unchanged 12:18:54 Received message from Master: op=Shutter serial=87644 12:18:54 Shutter LASER close 12:18:54 Received message from Camera: op=State serial=87646 12:18:54 GetSingleValue result=40 Value=cccccccc 12:18:54 SkyScan query 12:18:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:18:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:55 Parameters OK 12:18:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:55 Set A/D data flow result=40 12:18:55 Set A/D channel type result=40 12:18:55 Set A/D encoding result=40 12:18:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:55 Set channel filter=0.000000e+000 result=40 12:18:55 Config A/D Result=40 12:18:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:55 Get A/D filter: -9.255963e+061 result=40 12:18:55 Get A/D value=-858993460 result=40 12:18:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:55 Parameters OK 12:18:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:55 Set A/D data flow result=40 12:18:55 Set A/D channel type result=40 12:18:55 Set A/D encoding result=40 12:18:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:55 Set channel filter=0.000000e+000 result=40 12:18:55 Config A/D Result=40 12:18:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:55 Get A/D filter: -9.255963e+061 result=40 12:18:55 Get A/D value=-858993460 result=40 12:18:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:55 Aux= 12:18:55 Message to Camera, serial 87646 queued 12:19:32 Received message from Master: op=PointingHead serial=87659 12:19:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:19:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:19:32 Point started: ret=0 12:19:32 point_skyscan result=0 12:19:33 Check angles 12:19:33 SkyScan query 12:19:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:19:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:19:33 Message to Master queued w/err=0: serial=87659 error=0 12:19:38 Received message from Master: op=Filter serial=87660 12:19:38 Color wheel filter change from 0 to 0 12:19:38 FLIGetFilterPos err=0 currentPosition=0 12:19:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:38 Filter is already there-color wheel unchanged 12:19:38 Received message from Master: op=Shutter serial=87661 12:19:38 Shutter LASER close 12:19:38 Received message from Camera: op=State serial=87663 12:19:38 GetSingleValue result=40 Value=cccccccc 12:19:38 SkyScan query 12:19:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:19:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:39 Parameters OK 12:19:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:39 Set A/D data flow result=40 12:19:39 Set A/D channel type result=40 12:19:39 Set A/D encoding result=40 12:19:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:39 Set channel filter=0.000000e+000 result=40 12:19:39 Config A/D Result=40 12:19:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:39 Get A/D filter: -9.255963e+061 result=40 12:19:39 Get A/D value=-858993460 result=40 12:19:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:39 Parameters OK 12:19:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:39 Set A/D data flow result=40 12:19:39 Set A/D channel type result=40 12:19:39 Set A/D encoding result=40 12:19:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:39 Set channel filter=0.000000e+000 result=40 12:19:39 Config A/D Result=40 12:19:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:39 Get A/D filter: -9.255963e+061 result=40 12:19:39 Get A/D value=-858993460 result=40 12:19:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:39 Aux= 12:19:39 Message to Camera, serial 87663 queued 12:20:16 Received message from Master: op=PointingHead serial=87676 12:20:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:20:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:20:16 Point started: ret=0 12:20:16 point_skyscan result=0 12:20:17 Check angles 12:20:17 SkyScan query 12:20:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 12:20:18 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 12:20:18 Check angles 12:20:18 SkyScan query 12:20:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 12:20:18 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 12:20:18 Check angles 12:20:18 SkyScan query 12:20:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.295<-16353 Statuses=0008 0009 12:20:19 Msec=1500 True Az=112.995 Ze=-65.295 Az status=0008 Ze status=0009 12:20:19 Check angles 12:20:19 SkyScan query 12:20:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 12:20:20 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 12:20:20 Check angles 12:20:20 SkyScan query 12:20:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.64<-19176 Statuses=0008 0009 12:20:21 Msec=3000 True Az=112.995 Ze=-107.64 Az status=0008 Ze status=0009 12:20:21 Check angles 12:20:21 SkyScan query 12:20:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 12:20:21 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 12:20:21 Check angles 12:20:21 SkyScan query 12:20:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.535<-21969 Statuses=0008 0009 12:20:22 Msec=4500 True Az=112.995 Ze=-149.535 Az status=0008 Ze status=0009 12:20:22 Check angles 12:20:22 SkyScan query 12:20:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.46<-23364 Statuses=0008 0009 12:20:23 Msec=5250 True Az=112.995 Ze=-170.46 Az status=0008 Ze status=0009 12:20:23 Check angles 12:20:23 SkyScan query 12:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:20:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:20:24 Message to Master queued w/err=0: serial=87676 error=0 12:20:29 Received message from Master: op=Filter serial=87677 12:20:29 Color wheel filter change from 0 to 0 12:20:29 FLIGetFilterPos err=0 currentPosition=0 12:20:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:29 Filter is already there-color wheel unchanged 12:20:29 Received message from Master: op=Shutter serial=87678 12:20:29 Shutter LASER open 12:20:29 Received message from Camera: op=State serial=87680 12:20:29 GetSingleValue result=40 Value=cccccccc 12:20:29 SkyScan query 12:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:20:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:29 Parameters OK 12:20:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:29 Set A/D data flow result=40 12:20:29 Set A/D channel type result=40 12:20:29 Set A/D encoding result=40 12:20:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:29 Set channel filter=0.000000e+000 result=40 12:20:29 Config A/D Result=40 12:20:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:29 Get A/D filter: -9.255963e+061 result=40 12:20:29 Get A/D value=-858993460 result=40 12:20:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:29 Parameters OK 12:20:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:29 Set A/D data flow result=40 12:20:29 Set A/D channel type result=40 12:20:29 Set A/D encoding result=40 12:20:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:29 Set channel filter=0.000000e+000 result=40 12:20:29 Config A/D Result=40 12:20:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:29 Get A/D filter: -9.255963e+061 result=40 12:20:29 Get A/D value=-858993460 result=40 12:20:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:29 Aux= 12:20:29 Message to Camera, serial 87680 queued 12:20:38 Received message from Master: op=Shutter serial=87690 12:20:38 Shutter LASER close 12:20:39 Received message from Master: op=PointingHead serial=87694 12:20:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:20:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:20:39 Point started: ret=0 12:20:39 point_skyscan result=0 12:20:40 Check angles 12:20:40 SkyScan query 12:20:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 12:20:40 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 12:20:40 Check angles 12:20:40 SkyScan query 12:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 12:20:41 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 12:20:41 Check angles 12:20:41 SkyScan query 12:20:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 12:20:42 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 12:20:42 Check angles 12:20:42 SkyScan query 12:20:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 12:20:42 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 12:20:43 Check angles 12:20:43 SkyScan query 12:20:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.115<-15941 Statuses=0008 0009 12:20:43 Msec=3000 True Az=112.995 Ze=-59.115 Az status=0008 Ze status=0009 12:20:43 Check angles 12:20:43 SkyScan query 12:20:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.13<-14542 Statuses=0008 0009 12:20:44 Msec=3750 True Az=112.995 Ze=-38.13 Az status=0008 Ze status=0009 12:20:44 Check angles 12:20:44 SkyScan query 12:20:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 12:20:45 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 12:20:45 Check angles 12:20:45 SkyScan query 12:20:45 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 12:20:45 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 12:20:46 Check angles 12:20:46 SkyScan query 12:20:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:20:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:20:46 Message to Master queued w/err=0: serial=87694 error=0 12:20:51 Received message from Master: op=Filter serial=87695 12:20:51 Color wheel filter change from 0 to 0 12:20:51 FLIGetFilterPos err=0 currentPosition=0 12:20:51 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:51 Filter is already there-color wheel unchanged 12:20:51 Received message from Master: op=Shutter serial=87696 12:20:51 Shutter LASER close 12:20:52 Received message from Camera: op=State serial=87698 12:20:52 GetSingleValue result=40 Value=cccccccc 12:20:52 SkyScan query 12:20:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:20:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:52 Parameters OK 12:20:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:52 Set A/D data flow result=40 12:20:52 Set A/D channel type result=40 12:20:52 Set A/D encoding result=40 12:20:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:52 Set channel filter=0.000000e+000 result=40 12:20:52 Config A/D Result=40 12:20:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:52 Get A/D filter: -9.255963e+061 result=40 12:20:52 Get A/D value=-858993460 result=40 12:20:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:52 Parameters OK 12:20:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:52 Set A/D data flow result=40 12:20:52 Set A/D channel type result=40 12:20:52 Set A/D encoding result=40 12:20:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:52 Set channel filter=0.000000e+000 result=40 12:20:52 Config A/D Result=40 12:20:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:52 Get A/D filter: -9.255963e+061 result=40 12:20:52 Get A/D value=-858993460 result=40 12:20:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:52 Aux= 12:20:52 Message to Camera, serial 87698 queued 12:21:29 Received message from Master: op=PointingHead serial=87711 12:21:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:21:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:21:29 Point started: ret=0 12:21:29 point_skyscan result=0 12:21:30 Check angles 12:21:30 SkyScan query 12:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:21:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:21:31 Message to Master queued w/err=0: serial=87711 error=0 12:21:36 Received message from Master: op=Filter serial=87712 12:21:36 Color wheel filter change from 0 to 0 12:21:36 FLIGetFilterPos err=0 currentPosition=0 12:21:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:36 Filter is already there-color wheel unchanged 12:21:36 Received message from Master: op=Shutter serial=87713 12:21:36 Shutter LASER close 12:21:36 Received message from Camera: op=State serial=87715 12:21:36 GetSingleValue result=40 Value=cccccccc 12:21:36 SkyScan query 12:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:21:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:36 Parameters OK 12:21:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:36 Set A/D data flow result=40 12:21:36 Set A/D channel type result=40 12:21:36 Set A/D encoding result=40 12:21:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:36 Set channel filter=0.000000e+000 result=40 12:21:36 Config A/D Result=40 12:21:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:36 Get A/D filter: -9.255963e+061 result=40 12:21:36 Get A/D value=-858993460 result=40 12:21:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:36 Parameters OK 12:21:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:36 Set A/D data flow result=40 12:21:36 Set A/D channel type result=40 12:21:36 Set A/D encoding result=40 12:21:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:36 Set channel filter=0.000000e+000 result=40 12:21:36 Config A/D Result=40 12:21:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:36 Get A/D filter: -9.255963e+061 result=40 12:21:36 Get A/D value=-858993460 result=40 12:21:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:36 Aux= 12:21:36 Message to Camera, serial 87715 queued 12:22:13 Received message from Master: op=PointingHead serial=87728 12:22:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:22:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:22:14 Point started: ret=0 12:22:14 point_skyscan result=0 12:22:14 Check angles 12:22:14 SkyScan query 12:22:15 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 12:22:15 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 12:22:15 Check angles 12:22:15 SkyScan query 12:22:16 SkyScan query done: ret=0 az=153.765<-10251 ze=-6.495<-12433 Statuses=0009 0008 12:22:16 Msec=750 True Az=153.765 Ze=-6.495 Az status=0009 Ze status=0008 12:22:16 Check angles 12:22:16 SkyScan query 12:22:16 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 12:22:16 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 12:22:17 Check angles 12:22:17 SkyScan query 12:22:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:22:17 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:22:17 Message to Master queued w/err=0: serial=87728 error=0 12:22:22 Received message from Master: op=Filter serial=87729 12:22:22 Color wheel filter change from 0 to 0 12:22:22 FLIGetFilterPos err=0 currentPosition=0 12:22:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:22 Filter is already there-color wheel unchanged 12:22:22 Received message from Master: op=Shutter serial=87730 12:22:22 Shutter LASER close 12:22:22 Received message from Camera: op=State serial=87732 12:22:22 GetSingleValue result=40 Value=cccccccc 12:22:22 SkyScan query 12:22:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:22:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:23 Parameters OK 12:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:23 Set A/D data flow result=40 12:22:23 Set A/D channel type result=40 12:22:23 Set A/D encoding result=40 12:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:23 Set channel filter=0.000000e+000 result=40 12:22:23 Config A/D Result=40 12:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:23 Get A/D filter: -9.255963e+061 result=40 12:22:23 Get A/D value=-858993460 result=40 12:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:23 Parameters OK 12:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:23 Set A/D data flow result=40 12:22:23 Set A/D channel type result=40 12:22:23 Set A/D encoding result=40 12:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:23 Set channel filter=0.000000e+000 result=40 12:22:23 Config A/D Result=40 12:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:23 Get A/D filter: -9.255963e+061 result=40 12:22:23 Get A/D value=-858993460 result=40 12:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:23 Aux= 12:22:23 Message to Camera, serial 87732 queued 12:23:00 Received message from Master: op=PointingHead serial=87745 12:23:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:23:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:23:00 Point started: ret=0 12:23:00 point_skyscan result=0 12:23:01 Check angles 12:23:01 SkyScan query 12:23:01 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 12:23:01 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 12:23:02 Check angles 12:23:02 SkyScan query 12:23:02 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 12:23:02 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 12:23:02 Check angles 12:23:02 SkyScan query 12:23:03 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 12:23:03 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 12:23:03 Check angles 12:23:03 SkyScan query 12:23:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:23:04 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:23:04 Message to Master queued w/err=0: serial=87745 error=0 12:23:09 Received message from Master: op=Filter serial=87746 12:23:09 Color wheel filter change from 0 to 0 12:23:09 FLIGetFilterPos err=0 currentPosition=0 12:23:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:09 Filter is already there-color wheel unchanged 12:23:09 Received message from Master: op=Shutter serial=87747 12:23:09 Shutter LASER close 12:23:09 Received message from Camera: op=State serial=87749 12:23:09 GetSingleValue result=40 Value=cccccccc 12:23:09 SkyScan query 12:23:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:23:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:10 Parameters OK 12:23:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:10 Set A/D data flow result=40 12:23:10 Set A/D channel type result=40 12:23:10 Set A/D encoding result=40 12:23:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:10 Set channel filter=0.000000e+000 result=40 12:23:10 Config A/D Result=40 12:23:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:10 Get A/D filter: -9.255963e+061 result=40 12:23:10 Get A/D value=-858993460 result=40 12:23:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:10 Parameters OK 12:23:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:10 Set A/D data flow result=40 12:23:10 Set A/D channel type result=40 12:23:10 Set A/D encoding result=40 12:23:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:10 Set channel filter=0.000000e+000 result=40 12:23:10 Config A/D Result=40 12:23:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:10 Get A/D filter: -9.255963e+061 result=40 12:23:10 Get A/D value=-858993460 result=40 12:23:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:10 Aux= 12:23:10 Message to Camera, serial 87749 queued 12:23:46 Received message from Master: op=PointingHead serial=87762 12:23:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:23:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:23:47 Point started: ret=0 12:23:47 point_skyscan result=0 12:23:47 Check angles 12:23:47 SkyScan query 12:23:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 12:23:48 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 12:23:48 Check angles 12:23:48 SkyScan query 12:23:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 12:23:49 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 12:23:49 Check angles 12:23:49 SkyScan query 12:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.145<-16343 Statuses=0008 0009 12:23:50 Msec=1500 True Az=112.995 Ze=-65.145 Az status=0008 Ze status=0009 12:23:50 Check angles 12:23:50 SkyScan query 12:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.115<-17741 Statuses=0008 0009 12:23:50 Msec=2250 True Az=112.995 Ze=-86.115 Az status=0008 Ze status=0009 [UTC 2019-3-3 12:23:50] 12:23:50 Check angles 12:23:50 SkyScan query 12:23:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.04<-19136 Statuses=0008 0009 12:23:51 Msec=3000 True Az=112.995 Ze=-107.04 Az status=0008 Ze status=0009 12:23:51 Check angles 12:23:51 SkyScan query 12:23:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.01<-20534 Statuses=0008 0009 12:23:52 Msec=3750 True Az=112.995 Ze=-128.01 Az status=0008 Ze status=0009 12:23:52 Check angles 12:23:52 SkyScan query 12:23:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.95<-21930 Statuses=0008 0009 12:23:53 Msec=4500 True Az=112.995 Ze=-148.95 Az status=0008 Ze status=0009 12:23:53 Check angles 12:23:53 SkyScan query 12:23:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.89<-23326 Statuses=0008 0009 12:23:53 Msec=5250 True Az=112.995 Ze=-169.89 Az status=0008 Ze status=0009 12:23:53 Check angles 12:23:53 SkyScan query 12:23:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:23:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:23:54 Message to Master queued w/err=0: serial=87762 error=0 12:23:59 Received message from Master: op=Filter serial=87763 12:23:59 Color wheel filter change from 0 to 0 12:23:59 FLIGetFilterPos err=0 currentPosition=0 12:23:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:59 Filter is already there-color wheel unchanged 12:23:59 Received message from Master: op=Shutter serial=87764 12:23:59 Shutter LASER open 12:23:59 Received message from Camera: op=State serial=87766 12:23:59 GetSingleValue result=40 Value=cccccccc 12:23:59 SkyScan query 12:24:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:24:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:00 Parameters OK 12:24:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:00 Set A/D data flow result=40 12:24:00 Set A/D channel type result=40 12:24:00 Set A/D encoding result=40 12:24:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:00 Set channel filter=0.000000e+000 result=40 12:24:00 Config A/D Result=40 12:24:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:00 Get A/D filter: -9.255963e+061 result=40 12:24:00 Get A/D value=-858993460 result=40 12:24:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:00 Parameters OK 12:24:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:00 Set A/D data flow result=40 12:24:00 Set A/D channel type result=40 12:24:00 Set A/D encoding result=40 12:24:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:00 Set channel filter=0.000000e+000 result=40 12:24:00 Config A/D Result=40 12:24:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:00 Get A/D filter: -9.255963e+061 result=40 12:24:00 Get A/D value=-858993460 result=40 12:24:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:00 Aux= 12:24:00 Message to Camera, serial 87766 queued 12:24:07 Received message from Master: op=Shutter serial=87775 12:24:07 Shutter LASER close 12:24:08 Received message from Master: op=PointingHead serial=87779 12:24:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:24:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:24:08 Point started: ret=0 12:24:08 point_skyscan result=0 12:24:09 Check angles 12:24:09 SkyScan query 12:24:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 12:24:10 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 12:24:10 Check angles 12:24:10 SkyScan query 12:24:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.905<-20127 Statuses=0008 0009 12:24:10 Msec=750 True Az=112.995 Ze=-121.905 Az status=0008 Ze status=0009 12:24:11 Check angles 12:24:11 SkyScan query 12:24:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 12:24:11 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 12:24:11 Check angles 12:24:11 SkyScan query 12:24:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.025<-17335 Statuses=0008 0009 12:24:12 Msec=2250 True Az=112.995 Ze=-80.025 Az status=0008 Ze status=0009 12:24:12 Check angles 12:24:12 SkyScan query 12:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 12:24:13 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 12:24:13 Check angles 12:24:13 SkyScan query 12:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.1<-14540 Statuses=0008 0009 12:24:13 Msec=3750 True Az=112.995 Ze=-38.1 Az status=0008 Ze status=0009 12:24:14 Check angles 12:24:14 SkyScan query 12:24:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.16<-13144 Statuses=0008 0009 12:24:14 Msec=4500 True Az=112.995 Ze=-17.16 Az status=0008 Ze status=0009 12:24:14 Check angles 12:24:14 SkyScan query 12:24:15 SkyScan query done: ret=0 az=112.995<-7533 ze=3.81<-11746 Statuses=0008 0009 12:24:15 Msec=5250 True Az=112.995 Ze=3.81 Az status=0008 Ze status=0009 12:24:15 Check angles 12:24:15 SkyScan query 12:24:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:24:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:24:16 Message to Master queued w/err=0: serial=87779 error=0 12:24:21 Received message from Master: op=Filter serial=87780 12:24:21 Color wheel filter change from 0 to 0 12:24:21 FLIGetFilterPos err=0 currentPosition=0 12:24:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:21 Filter is already there-color wheel unchanged 12:24:21 Received message from Master: op=Shutter serial=87781 12:24:21 Shutter LASER close 12:24:21 Received message from Camera: op=State serial=87783 12:24:21 GetSingleValue result=40 Value=cccccccc 12:24:21 SkyScan query 12:24:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:24:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:22 Parameters OK 12:24:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:22 Set A/D data flow result=40 12:24:22 Set A/D channel type result=40 12:24:22 Set A/D encoding result=40 12:24:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:22 Set channel filter=0.000000e+000 result=40 12:24:22 Config A/D Result=40 12:24:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:22 Get A/D filter: -9.255963e+061 result=40 12:24:22 Get A/D value=-858993460 result=40 12:24:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:22 Parameters OK 12:24:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:22 Set A/D data flow result=40 12:24:22 Set A/D channel type result=40 12:24:22 Set A/D encoding result=40 12:24:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:22 Set channel filter=0.000000e+000 result=40 12:24:22 Config A/D Result=40 12:24:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:22 Get A/D filter: -9.255963e+061 result=40 12:24:22 Get A/D value=-858993460 result=40 12:24:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:22 Aux= 12:24:22 Message to Camera, serial 87783 queued 12:24:58 Received message from Master: op=PointingHead serial=87796 12:24:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:24:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:24:59 Point started: ret=0 12:24:59 point_skyscan result=0 12:24:59 Check angles 12:24:59 SkyScan query 12:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:25:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:25:00 Message to Master queued w/err=0: serial=87796 error=0 12:25:05 Received message from Master: op=Filter serial=87797 12:25:05 Color wheel filter change from 0 to 0 12:25:05 FLIGetFilterPos err=0 currentPosition=0 12:25:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:05 Filter is already there-color wheel unchanged 12:25:05 Received message from Master: op=Shutter serial=87798 12:25:05 Shutter LASER close 12:25:05 Received message from Camera: op=State serial=87800 12:25:05 GetSingleValue result=40 Value=cccccccc 12:25:05 SkyScan query 12:25:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:25:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:06 Parameters OK 12:25:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:06 Set A/D data flow result=40 12:25:06 Set A/D channel type result=40 12:25:06 Set A/D encoding result=40 12:25:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:06 Set channel filter=0.000000e+000 result=40 12:25:06 Config A/D Result=40 12:25:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:06 Get A/D filter: -9.255963e+061 result=40 12:25:06 Get A/D value=-858993460 result=40 12:25:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:06 Parameters OK 12:25:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:06 Set A/D data flow result=40 12:25:06 Set A/D channel type result=40 12:25:06 Set A/D encoding result=40 12:25:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:06 Set channel filter=0.000000e+000 result=40 12:25:06 Config A/D Result=40 12:25:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:06 Get A/D filter: -9.255963e+061 result=40 12:25:06 Get A/D value=-858993460 result=40 12:25:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:06 Aux= 12:25:06 Message to Camera, serial 87800 queued 12:25:43 Received message from Master: op=PointingHead serial=87813 12:25:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:25:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:25:43 Point started: ret=0 12:25:43 point_skyscan result=0 12:25:44 Check angles 12:25:44 SkyScan query 12:25:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:25:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:25:44 Message to Master queued w/err=0: serial=87813 error=0 12:25:49 Received message from Master: op=Filter serial=87814 12:25:49 Color wheel filter change from 0 to 0 12:25:49 FLIGetFilterPos err=0 currentPosition=0 12:25:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:49 Filter is already there-color wheel unchanged 12:25:50 Received message from Master: op=Shutter serial=87815 12:25:50 Shutter LASER close 12:25:50 Received message from Camera: op=State serial=87817 12:25:50 GetSingleValue result=40 Value=cccccccc 12:25:50 SkyScan query 12:25:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:25:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:50 Parameters OK 12:25:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:50 Set A/D data flow result=40 12:25:50 Set A/D channel type result=40 12:25:50 Set A/D encoding result=40 12:25:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:50 Set channel filter=0.000000e+000 result=40 12:25:50 Config A/D Result=40 12:25:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:50 Get A/D filter: -9.255963e+061 result=40 12:25:50 Get A/D value=-858993460 result=40 12:25:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:50 Parameters OK 12:25:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:50 Set A/D data flow result=40 12:25:50 Set A/D channel type result=40 12:25:50 Set A/D encoding result=40 12:25:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:50 Set channel filter=0.000000e+000 result=40 12:25:50 Config A/D Result=40 12:25:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:50 Get A/D filter: -9.255963e+061 result=40 12:25:50 Get A/D value=-858993460 result=40 12:25:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:50 Aux= 12:25:50 Message to Camera, serial 87817 queued 12:26:27 Received message from Master: op=PointingHead serial=87830 12:26:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:26:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:26:27 Point started: ret=0 12:26:27 point_skyscan result=0 12:26:28 Check angles 12:26:28 SkyScan query 12:26:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:26:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:26:29 Message to Master queued w/err=0: serial=87830 error=0 12:26:34 Received message from Master: op=Filter serial=87831 12:26:34 Color wheel filter change from 0 to 0 12:26:34 FLIGetFilterPos err=0 currentPosition=0 12:26:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:34 Filter is already there-color wheel unchanged 12:26:34 Received message from Master: op=Shutter serial=87832 12:26:34 Shutter LASER close 12:26:34 Received message from Camera: op=State serial=87834 12:26:34 GetSingleValue result=40 Value=cccccccc 12:26:34 SkyScan query 12:26:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:26:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:34 Parameters OK 12:26:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:34 Set A/D data flow result=40 12:26:34 Set A/D channel type result=40 12:26:34 Set A/D encoding result=40 12:26:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:34 Set channel filter=0.000000e+000 result=40 12:26:34 Config A/D Result=40 12:26:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:34 Get A/D filter: -9.255963e+061 result=40 12:26:34 Get A/D value=-858993460 result=40 12:26:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:34 Parameters OK 12:26:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:34 Set A/D data flow result=40 12:26:34 Set A/D channel type result=40 12:26:34 Set A/D encoding result=40 12:26:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:34 Set channel filter=0.000000e+000 result=40 12:26:34 Config A/D Result=40 12:26:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:34 Get A/D filter: -9.255963e+061 result=40 12:26:34 Get A/D value=-858993460 result=40 12:26:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:34 Aux= 12:26:34 Message to Camera, serial 87834 queued 12:27:11 Received message from Master: op=PointingHead serial=87847 12:27:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:27:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:27:12 Point started: ret=0 12:27:12 point_skyscan result=0 12:27:12 Check angles 12:27:12 SkyScan query 12:27:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 12:27:13 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 12:27:13 Check angles 12:27:13 SkyScan query 12:27:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 12:27:14 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 12:27:14 Check angles 12:27:14 SkyScan query 12:27:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.12<-16408 Statuses=0008 0009 12:27:14 Msec=1500 True Az=112.995 Ze=-66.12 Az status=0008 Ze status=0009 12:27:15 Check angles 12:27:15 SkyScan query 12:27:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 12:27:15 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 12:27:15 Check angles 12:27:15 SkyScan query 12:27:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.015<-19201 Statuses=0008 0009 12:27:16 Msec=3000 True Az=112.995 Ze=-108.015 Az status=0008 Ze status=0009 12:27:16 Check angles 12:27:16 SkyScan query 12:27:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.955<-20597 Statuses=0008 0009 12:27:17 Msec=3750 True Az=112.995 Ze=-128.955 Az status=0008 Ze status=0009 12:27:17 Check angles 12:27:17 SkyScan query 12:27:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.925<-21995 Statuses=0008 0009 12:27:17 Msec=4500 True Az=112.995 Ze=-149.925 Az status=0008 Ze status=0009 12:27:18 Check angles 12:27:18 SkyScan query 12:27:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.805<-23387 Statuses=0008 0009 12:27:18 Msec=5250 True Az=112.995 Ze=-170.805 Az status=0008 Ze status=0009 12:27:18 Check angles 12:27:18 SkyScan query 12:27:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:27:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:27:19 Message to Master queued w/err=0: serial=87847 error=0 12:27:24 Received message from Master: op=Filter serial=87848 12:27:24 Color wheel filter change from 0 to 0 12:27:24 FLIGetFilterPos err=0 currentPosition=0 12:27:24 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:24 Filter is already there-color wheel unchanged 12:27:24 Received message from Master: op=Shutter serial=87849 12:27:24 Shutter LASER open 12:27:24 Received message from Camera: op=State serial=87851 12:27:24 GetSingleValue result=40 Value=cccccccc 12:27:24 SkyScan query 12:27:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:27:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:25 Parameters OK 12:27:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:25 Set A/D data flow result=40 12:27:25 Set A/D channel type result=40 12:27:25 Set A/D encoding result=40 12:27:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:25 Set channel filter=0.000000e+000 result=40 12:27:25 Config A/D Result=40 12:27:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:25 Get A/D filter: -9.255963e+061 result=40 12:27:25 Get A/D value=-858993460 result=40 12:27:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:25 Parameters OK 12:27:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:25 Set A/D data flow result=40 12:27:25 Set A/D channel type result=40 12:27:25 Set A/D encoding result=40 12:27:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:25 Set channel filter=0.000000e+000 result=40 12:27:25 Config A/D Result=40 12:27:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:25 Get A/D filter: -9.255963e+061 result=40 12:27:25 Get A/D value=-858993460 result=40 12:27:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:25 Aux= 12:27:25 Message to Camera, serial 87851 queued 12:27:33 Received message from Master: op=Shutter serial=87861 12:27:33 Shutter LASER close 12:27:34 Received message from Master: op=PointingHead serial=87865 12:27:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:27:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:27:34 Point started: ret=0 12:27:34 point_skyscan result=0 12:27:35 Check angles 12:27:35 SkyScan query 12:27:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 12:27:36 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 12:27:36 Check angles 12:27:36 SkyScan query 12:27:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.665<-20111 Statuses=0008 0009 12:27:36 Msec=750 True Az=112.995 Ze=-121.665 Az status=0008 Ze status=0009 12:27:37 Check angles 12:27:37 SkyScan query 12:27:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.71<-18714 Statuses=0008 0009 12:27:37 Msec=1500 True Az=112.995 Ze=-100.71 Az status=0008 Ze status=0009 12:27:37 Check angles 12:27:37 SkyScan query 12:27:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.32<-17288 Statuses=0008 0009 12:27:38 Msec=2250 True Az=112.995 Ze=-79.32 Az status=0008 Ze status=0009 12:27:38 Check angles 12:27:38 SkyScan query 12:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.915<-15861 Statuses=0008 0009 12:27:39 Msec=3000 True Az=112.995 Ze=-57.915 Az status=0008 Ze status=0009 12:27:39 Check angles 12:27:39 SkyScan query 12:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.525<-14435 Statuses=0008 0009 12:27:39 Msec=3750 True Az=112.995 Ze=-36.525 Az status=0008 Ze status=0009 12:27:40 Check angles 12:27:40 SkyScan query 12:27:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.585<-13039 Statuses=0008 0009 12:27:40 Msec=4500 True Az=112.995 Ze=-15.585 Az status=0008 Ze status=0009 12:27:40 Check angles 12:27:40 SkyScan query 12:27:41 SkyScan query done: ret=0 az=112.995<-7533 ze=5.055<-11663 Statuses=0008 0009 12:27:41 Msec=5250 True Az=112.995 Ze=5.055 Az status=0008 Ze status=0009 12:27:41 Check angles 12:27:41 SkyScan query 12:27:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:27:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:27:42 Message to Master queued w/err=0: serial=87865 error=0 12:27:47 Received message from Master: op=Filter serial=87866 12:27:47 Color wheel filter change from 0 to 0 12:27:47 FLIGetFilterPos err=0 currentPosition=0 12:27:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:47 Filter is already there-color wheel unchanged 12:27:47 Received message from Master: op=Shutter serial=87867 12:27:47 Shutter LASER close 12:27:47 Received message from Camera: op=State serial=87869 12:27:47 GetSingleValue result=40 Value=cccccccc 12:27:47 SkyScan query 12:27:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:27:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:48 Parameters OK 12:27:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:48 Set A/D data flow result=40 12:27:48 Set A/D channel type result=40 12:27:48 Set A/D encoding result=40 12:27:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:48 Set channel filter=0.000000e+000 result=40 12:27:48 Config A/D Result=40 12:27:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:48 Get A/D filter: -9.255963e+061 result=40 12:27:48 Get A/D value=-858993460 result=40 12:27:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:48 Parameters OK 12:27:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:48 Set A/D data flow result=40 12:27:48 Set A/D channel type result=40 12:27:48 Set A/D encoding result=40 12:27:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:48 Set channel filter=0.000000e+000 result=40 12:27:48 Config A/D Result=40 12:27:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:48 Get A/D filter: -9.255963e+061 result=40 12:27:48 Get A/D value=-858993460 result=40 12:27:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:48 Aux= 12:27:48 Message to Camera, serial 87869 queued 12:28:24 Received message from Master: op=PointingHead serial=87882 12:28:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:28:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:28:25 Point started: ret=0 12:28:25 point_skyscan result=0 12:28:26 Check angles 12:28:26 SkyScan query 12:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:28:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:28:26 Message to Master queued w/err=0: serial=87882 error=0 12:28:31 Received message from Master: op=Filter serial=87883 12:28:31 Color wheel filter change from 0 to 0 12:28:31 FLIGetFilterPos err=0 currentPosition=0 12:28:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:31 Filter is already there-color wheel unchanged 12:28:31 Received message from Master: op=Shutter serial=87884 12:28:31 Shutter LASER close 12:28:31 Received message from Camera: op=State serial=87886 12:28:31 GetSingleValue result=40 Value=cccccccc 12:28:31 SkyScan query 12:28:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:28:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:32 Parameters OK 12:28:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:32 Set A/D data flow result=40 12:28:32 Set A/D channel type result=40 12:28:32 Set A/D encoding result=40 12:28:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:32 Set channel filter=0.000000e+000 result=40 12:28:32 Config A/D Result=40 12:28:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:32 Get A/D filter: -9.255963e+061 result=40 12:28:32 Get A/D value=-858993460 result=40 12:28:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:32 Parameters OK 12:28:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:32 Set A/D data flow result=40 12:28:32 Set A/D channel type result=40 12:28:32 Set A/D encoding result=40 12:28:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:32 Set channel filter=0.000000e+000 result=40 12:28:32 Config A/D Result=40 12:28:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:32 Get A/D filter: -9.255963e+061 result=40 12:28:32 Get A/D value=-858993460 result=40 12:28:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:32 Aux= 12:28:32 Message to Camera, serial 87886 queued 12:29:09 Received message from Master: op=PointingHead serial=87899 12:29:09 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:29:09 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:29:09 Point started: ret=0 12:29:09 point_skyscan result=0 12:29:10 Check angles 12:29:10 SkyScan query 12:29:10 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 12:29:10 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 12:29:11 Check angles 12:29:11 SkyScan query 12:29:11 SkyScan query done: ret=0 az=153.69<-10246 ze=-6.495<-12433 Statuses=0009 0008 12:29:11 Msec=750 True Az=153.69 Ze=-6.495 Az status=0009 Ze status=0008 12:29:11 Check angles 12:29:11 SkyScan query 12:29:12 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.495<-12433 Statuses=0009 0008 12:29:12 Msec=1500 True Az=171.15 Ze=-6.495 Az status=0009 Ze status=0008 12:29:12 Check angles 12:29:12 SkyScan query 12:29:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:29:13 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:29:13 Message to Master queued w/err=0: serial=87899 error=0 12:29:18 Received message from Master: op=Filter serial=87900 12:29:18 Color wheel filter change from 0 to 0 12:29:18 FLIGetFilterPos err=0 currentPosition=0 12:29:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:18 Filter is already there-color wheel unchanged 12:29:18 Received message from Master: op=Shutter serial=87901 12:29:18 Shutter LASER close 12:29:18 Received message from Camera: op=State serial=87903 12:29:18 GetSingleValue result=40 Value=cccccccc 12:29:18 SkyScan query 12:29:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:29:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:19 Parameters OK 12:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:19 Set A/D data flow result=40 12:29:19 Set A/D channel type result=40 12:29:19 Set A/D encoding result=40 12:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:19 Set channel filter=0.000000e+000 result=40 12:29:19 Config A/D Result=40 12:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:19 Get A/D filter: -9.255963e+061 result=40 12:29:19 Get A/D value=-858993460 result=40 12:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:19 Parameters OK 12:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:19 Set A/D data flow result=40 12:29:19 Set A/D channel type result=40 12:29:19 Set A/D encoding result=40 12:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:19 Set channel filter=0.000000e+000 result=40 12:29:19 Config A/D Result=40 12:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:19 Get A/D filter: -9.255963e+061 result=40 12:29:19 Get A/D value=-858993460 result=40 12:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:19 Aux= 12:29:19 Message to Camera, serial 87903 queued 12:29:54 Received message from Master: op=PointingHead serial=87915 12:29:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:29:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:29:55 Point started: ret=0 12:29:55 point_skyscan result=0 12:29:56 Check angles 12:29:56 SkyScan query 12:29:56 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 12:29:56 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 12:29:56 Check angles 12:29:56 SkyScan query 12:29:57 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 12:29:57 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 12:29:57 Check angles 12:29:57 SkyScan query 12:29:58 SkyScan query done: ret=0 az=117.24<-7816 ze=6.495<-11567 Statuses=0009 0008 12:29:58 Msec=1500 True Az=117.24 Ze=6.495 Az status=0009 Ze status=0008 12:29:58 Check angles 12:29:58 SkyScan query 12:29:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:29:58 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:29:58 Message to Master queued w/err=0: serial=87915 error=0 12:30:03 Received message from Master: op=Filter serial=87916 12:30:03 Color wheel filter change from 0 to 0 12:30:03 FLIGetFilterPos err=0 currentPosition=0 12:30:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:03 Filter is already there-color wheel unchanged 12:30:04 Received message from Master: op=Shutter serial=87917 12:30:04 Shutter LASER close 12:30:04 Received message from Camera: op=State serial=87919 12:30:04 GetSingleValue result=40 Value=cccccccc 12:30:04 SkyScan query 12:30:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:30:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:04 Parameters OK 12:30:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:04 Set A/D data flow result=40 12:30:04 Set A/D channel type result=40 12:30:04 Set A/D encoding result=40 12:30:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:04 Set channel filter=0.000000e+000 result=40 12:30:04 Config A/D Result=40 12:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:04 Get A/D filter: -9.255963e+061 result=40 12:30:04 Get A/D value=-858993460 result=40 12:30:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:04 Parameters OK 12:30:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:04 Set A/D data flow result=40 12:30:04 Set A/D channel type result=40 12:30:04 Set A/D encoding result=40 12:30:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:04 Set channel filter=0.000000e+000 result=40 12:30:04 Config A/D Result=40 12:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:04 Get A/D filter: -9.255963e+061 result=40 12:30:04 Get A/D value=-858993460 result=40 12:30:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:04 Aux= 12:30:04 Message to Camera, serial 87919 queued 12:30:41 Received message from Master: op=PointingHead serial=87932 12:30:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:30:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:30:41 Point started: ret=0 12:30:41 point_skyscan result=0 12:30:42 Check angles 12:30:42 SkyScan query 12:30:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 12:30:43 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 12:30:43 Check angles 12:30:43 SkyScan query 12:30:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.235<-14949 Statuses=0008 0009 12:30:43 Msec=750 True Az=112.995 Ze=-44.235 Az status=0008 Ze status=0009 12:30:44 Check angles 12:30:44 SkyScan query 12:30:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.61<-16374 Statuses=0008 0009 12:30:44 Msec=1500 True Az=112.995 Ze=-65.61 Az status=0008 Ze status=0009 12:30:44 Check angles 12:30:44 SkyScan query 12:30:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 12:30:45 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 12:30:45 Check angles 12:30:45 SkyScan query 12:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.94<-19196 Statuses=0008 0009 12:30:46 Msec=3000 True Az=112.995 Ze=-107.94 Az status=0008 Ze status=0009 12:30:46 Check angles 12:30:46 SkyScan query 12:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.865<-20591 Statuses=0008 0009 12:30:46 Msec=3750 True Az=112.995 Ze=-128.865 Az status=0008 Ze status=0009 12:30:47 Check angles 12:30:47 SkyScan query 12:30:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 12:30:47 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 12:30:47 Check angles 12:30:47 SkyScan query 12:30:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.09<-23406 Statuses=0008 0009 12:30:48 Msec=5250 True Az=112.995 Ze=-171.09 Az status=0008 Ze status=0009 12:30:48 Check angles 12:30:48 SkyScan query 12:30:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:30:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:30:49 Message to Master queued w/err=0: serial=87932 error=0 12:30:54 Received message from Master: op=Filter serial=87933 12:30:54 Color wheel filter change from 0 to 0 12:30:54 FLIGetFilterPos err=0 currentPosition=0 12:30:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:54 Filter is already there-color wheel unchanged 12:30:54 Received message from Master: op=Shutter serial=87934 12:30:54 Shutter LASER open 12:30:54 Received message from Camera: op=State serial=87936 12:30:54 GetSingleValue result=40 Value=cccccccc 12:30:54 SkyScan query 12:30:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:30:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:55 Parameters OK 12:30:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:55 Set A/D data flow result=40 12:30:55 Set A/D channel type result=40 12:30:55 Set A/D encoding result=40 12:30:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:55 Set channel filter=0.000000e+000 result=40 12:30:55 Config A/D Result=40 12:30:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:55 Get A/D filter: -9.255963e+061 result=40 12:30:55 Get A/D value=-858993460 result=40 12:30:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:55 Parameters OK 12:30:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:55 Set A/D data flow result=40 12:30:55 Set A/D channel type result=40 12:30:55 Set A/D encoding result=40 12:30:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:55 Set channel filter=0.000000e+000 result=40 12:30:55 Config A/D Result=40 12:30:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:55 Get A/D filter: -9.255963e+061 result=40 12:30:55 Get A/D value=-858993460 result=40 12:30:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:55 Aux= 12:30:55 Message to Camera, serial 87936 queued 12:31:03 Received message from Master: op=Shutter serial=87946 12:31:03 Shutter LASER close 12:31:03 Received message from Master: op=PointingHead serial=87950 12:31:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:31:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:31:04 Point started: ret=0 12:31:04 point_skyscan result=0 12:31:05 Check angles 12:31:05 SkyScan query 12:31:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 12:31:05 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 12:31:05 Check angles 12:31:05 SkyScan query 12:31:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 12:31:06 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 12:31:06 Check angles 12:31:06 SkyScan query 12:31:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 12:31:07 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 12:31:07 Check angles 12:31:07 SkyScan query 12:31:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 12:31:07 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 12:31:08 Check angles 12:31:08 SkyScan query 12:31:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.68<-15912 Statuses=0008 0009 12:31:08 Msec=3000 True Az=112.995 Ze=-58.68 Az status=0008 Ze status=0009 12:31:08 Check angles 12:31:08 SkyScan query 12:31:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 12:31:09 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 12:31:09 Check angles 12:31:09 SkyScan query 12:31:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.755<-13117 Statuses=0008 0009 12:31:10 Msec=4500 True Az=112.995 Ze=-16.755 Az status=0008 Ze status=0009 12:31:10 Check angles 12:31:10 SkyScan query 12:31:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.515<-11699 Statuses=0008 0009 12:31:10 Msec=5250 True Az=112.995 Ze=4.515 Az status=0008 Ze status=0009 12:31:11 Check angles 12:31:11 SkyScan query 12:31:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:31:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:31:11 Message to Master queued w/err=0: serial=87950 error=0 12:31:16 Received message from Master: op=Filter serial=87951 12:31:16 Color wheel filter change from 0 to 0 12:31:16 FLIGetFilterPos err=0 currentPosition=0 12:31:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:16 Filter is already there-color wheel unchanged 12:31:16 Received message from Master: op=Shutter serial=87952 12:31:16 Shutter LASER close 12:31:17 Received message from Camera: op=State serial=87954 12:31:17 GetSingleValue result=40 Value=cccccccc 12:31:17 SkyScan query 12:31:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:17 Parameters OK 12:31:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:17 Set A/D data flow result=40 12:31:17 Set A/D channel type result=40 12:31:17 Set A/D encoding result=40 12:31:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:17 Set channel filter=0.000000e+000 result=40 12:31:17 Config A/D Result=40 12:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:17 Get A/D filter: -9.255963e+061 result=40 12:31:17 Get A/D value=-858993460 result=40 12:31:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:17 Parameters OK 12:31:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:17 Set A/D data flow result=40 12:31:17 Set A/D channel type result=40 12:31:17 Set A/D encoding result=40 12:31:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:17 Set channel filter=0.000000e+000 result=40 12:31:17 Config A/D Result=40 12:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:17 Get A/D filter: -9.255963e+061 result=40 12:31:17 Get A/D value=-858993460 result=40 12:31:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:17 Aux= 12:31:17 Message to Camera, serial 87954 queued 12:31:54 Received message from Master: op=PointingHead serial=87967 12:31:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:31:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:31:54 Point started: ret=0 12:31:54 point_skyscan result=0 12:31:55 Check angles 12:31:55 SkyScan query 12:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:31:56 Message to Master queued w/err=0: serial=87967 error=0 12:32:01 Received message from Master: op=Filter serial=87968 12:32:01 Color wheel filter change from 0 to 0 12:32:01 FLIGetFilterPos err=0 currentPosition=0 12:32:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:01 Filter is already there-color wheel unchanged 12:32:01 Received message from Master: op=Shutter serial=87969 12:32:01 Shutter LASER close 12:32:01 Received message from Camera: op=State serial=87971 12:32:01 GetSingleValue result=40 Value=cccccccc 12:32:01 SkyScan query 12:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:32:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:01 Parameters OK 12:32:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:01 Set A/D data flow result=40 12:32:01 Set A/D channel type result=40 12:32:01 Set A/D encoding result=40 12:32:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:01 Set channel filter=0.000000e+000 result=40 12:32:01 Config A/D Result=40 12:32:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:01 Get A/D filter: -9.255963e+061 result=40 12:32:01 Get A/D value=-858993460 result=40 12:32:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:01 Parameters OK 12:32:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:01 Set A/D data flow result=40 12:32:01 Set A/D channel type result=40 12:32:01 Set A/D encoding result=40 12:32:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:01 Set channel filter=0.000000e+000 result=40 12:32:01 Config A/D Result=40 12:32:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:01 Get A/D filter: -9.255963e+061 result=40 12:32:01 Get A/D value=-858993460 result=40 12:32:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:01 Aux= 12:32:01 Message to Camera, serial 87971 queued 12:32:38 Received message from Master: op=PointingHead serial=87984 12:32:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:32:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:32:39 Point started: ret=0 12:32:39 point_skyscan result=0 12:32:39 Check angles 12:32:39 SkyScan query 12:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:32:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:32:40 Message to Master queued w/err=0: serial=87984 error=0 12:32:45 Received message from Master: op=Filter serial=87985 12:32:45 Color wheel filter change from 0 to 0 12:32:45 FLIGetFilterPos err=0 currentPosition=0 12:32:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:45 Filter is already there-color wheel unchanged 12:32:45 Received message from Master: op=Shutter serial=87986 12:32:45 Shutter LASER close 12:32:45 Received message from Camera: op=State serial=87988 12:32:45 GetSingleValue result=40 Value=cccccccc 12:32:45 SkyScan query 12:32:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:32:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:46 Parameters OK 12:32:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:46 Set A/D data flow result=40 12:32:46 Set A/D channel type result=40 12:32:46 Set A/D encoding result=40 12:32:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:46 Set channel filter=0.000000e+000 result=40 12:32:46 Config A/D Result=40 12:32:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:46 Get A/D filter: -9.255963e+061 result=40 12:32:46 Get A/D value=-858993460 result=40 12:32:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:46 Parameters OK 12:32:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:46 Set A/D data flow result=40 12:32:46 Set A/D channel type result=40 12:32:46 Set A/D encoding result=40 12:32:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:46 Set channel filter=0.000000e+000 result=40 12:32:46 Config A/D Result=40 12:32:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:46 Get A/D filter: -9.255963e+061 result=40 12:32:46 Get A/D value=-858993460 result=40 12:32:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:46 Aux= 12:32:46 Message to Camera, serial 87988 queued 12:33:23 Received message from Master: op=PointingHead serial=88001 12:33:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:33:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:33:23 Point started: ret=0 12:33:23 point_skyscan result=0 12:33:24 Check angles 12:33:24 SkyScan query 12:33:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:33:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:33:24 Message to Master queued w/err=0: serial=88001 error=0 12:33:29 Received message from Master: op=Filter serial=88002 12:33:29 Color wheel filter change from 0 to 0 12:33:29 FLIGetFilterPos err=0 currentPosition=0 12:33:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:29 Filter is already there-color wheel unchanged 12:33:30 Received message from Master: op=Shutter serial=88003 12:33:30 Shutter LASER close 12:33:30 Received message from Camera: op=State serial=88005 12:33:30 GetSingleValue result=40 Value=cccccccc 12:33:30 SkyScan query 12:33:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:33:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:30 Parameters OK 12:33:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:30 Set A/D data flow result=40 12:33:30 Set A/D channel type result=40 12:33:30 Set A/D encoding result=40 12:33:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:30 Set channel filter=0.000000e+000 result=40 12:33:30 Config A/D Result=40 12:33:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:30 Get A/D filter: -9.255963e+061 result=40 12:33:30 Get A/D value=-858993460 result=40 12:33:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:30 Parameters OK 12:33:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:30 Set A/D data flow result=40 12:33:30 Set A/D channel type result=40 12:33:30 Set A/D encoding result=40 12:33:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:30 Set channel filter=0.000000e+000 result=40 12:33:30 Config A/D Result=40 12:33:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:30 Get A/D filter: -9.255963e+061 result=40 12:33:30 Get A/D value=-858993460 result=40 12:33:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:30 Aux= 12:33:30 Message to Camera, serial 88005 queued 12:33:38 Received message from Master: op=Identify serial=88006 12:34:07 Received message from Master: op=PointingHead serial=88021 12:34:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:34:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:34:07 Point started: ret=0 12:34:07 point_skyscan result=0 12:34:08 Check angles 12:34:08 SkyScan query 12:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 12:34:09 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 12:34:09 Check angles 12:34:09 SkyScan query 12:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 12:34:09 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 12:34:10 Check angles 12:34:10 SkyScan query 12:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.52<-16368 Statuses=0008 0009 12:34:10 Msec=1500 True Az=112.995 Ze=-65.52 Az status=0008 Ze status=0009 12:34:10 Check angles 12:34:10 SkyScan query 12:34:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 12:34:11 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 12:34:11 Check angles 12:34:11 SkyScan query 12:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.43<-19162 Statuses=0008 0009 12:34:12 Msec=3000 True Az=112.995 Ze=-107.43 Az status=0008 Ze status=0009 12:34:12 Check angles 12:34:12 SkyScan query 12:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.79<-20586 Statuses=0008 0009 12:34:12 Msec=3750 True Az=112.995 Ze=-128.79 Az status=0008 Ze status=0009 12:34:13 Check angles 12:34:13 SkyScan query 12:34:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 [UTC 2019-3-3 12:34:13] 12:34:13 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 12:34:13 Check angles 12:34:13 SkyScan query 12:34:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.67<-23378 Statuses=0008 0009 12:34:14 Msec=5250 True Az=112.995 Ze=-170.67 Az status=0008 Ze status=0009 12:34:14 Check angles 12:34:14 SkyScan query 12:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:34:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:34:15 Message to Master queued w/err=0: serial=88021 error=0 12:34:20 Received message from Master: op=Filter serial=88022 12:34:20 Color wheel filter change from 0 to 0 12:34:20 FLIGetFilterPos err=0 currentPosition=0 12:34:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:20 Filter is already there-color wheel unchanged 12:34:20 Received message from Master: op=Shutter serial=88023 12:34:20 Shutter LASER open 12:34:20 Received message from Camera: op=State serial=88025 12:34:20 GetSingleValue result=40 Value=cccccccc 12:34:20 SkyScan query 12:34:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:34:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:21 Parameters OK 12:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:21 Set A/D data flow result=40 12:34:21 Set A/D channel type result=40 12:34:21 Set A/D encoding result=40 12:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:21 Set channel filter=0.000000e+000 result=40 12:34:21 Config A/D Result=40 12:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:21 Get A/D filter: -9.255963e+061 result=40 12:34:21 Get A/D value=-858993460 result=40 12:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:21 Parameters OK 12:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:21 Set A/D data flow result=40 12:34:21 Set A/D channel type result=40 12:34:21 Set A/D encoding result=40 12:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:21 Set channel filter=0.000000e+000 result=40 12:34:21 Config A/D Result=40 12:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:21 Get A/D filter: -9.255963e+061 result=40 12:34:21 Get A/D value=-858993460 result=40 12:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:21 Aux= 12:34:21 Message to Camera, serial 88025 queued 12:34:29 Received message from Master: op=Shutter serial=88035 12:34:29 Shutter LASER close 12:34:30 Received message from Master: op=PointingHead serial=88039 12:34:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:34:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:34:30 Point started: ret=0 12:34:30 point_skyscan result=0 12:34:31 Check angles 12:34:31 SkyScan query 12:34:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 12:34:31 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 12:34:31 Check angles 12:34:31 SkyScan query 12:34:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 12:34:32 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 12:34:32 Check angles 12:34:32 SkyScan query 12:34:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 12:34:33 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 12:34:33 Check angles 12:34:33 SkyScan query 12:34:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 12:34:34 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 12:34:34 Check angles 12:34:34 SkyScan query 12:34:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 12:34:34 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 12:34:34 Check angles 12:34:34 SkyScan query 12:34:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 12:34:35 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 12:34:35 Check angles 12:34:35 SkyScan query 12:34:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.77<-13118 Statuses=0008 0009 12:34:36 Msec=4500 True Az=112.995 Ze=-16.77 Az status=0008 Ze status=0009 12:34:36 Check angles 12:34:36 SkyScan query 12:34:37 SkyScan query done: ret=0 az=112.995<-7533 ze=4.155<-11723 Statuses=0008 0009 12:34:37 Msec=5250 True Az=112.995 Ze=4.155 Az status=0008 Ze status=0009 12:34:37 Check angles 12:34:37 SkyScan query 12:34:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:34:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:34:37 Message to Master queued w/err=0: serial=88039 error=0 12:34:42 Received message from Master: op=Filter serial=88040 12:34:42 Color wheel filter change from 0 to 0 12:34:42 FLIGetFilterPos err=0 currentPosition=0 12:34:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:42 Filter is already there-color wheel unchanged 12:34:42 Received message from Master: op=Shutter serial=88041 12:34:42 Shutter LASER close 12:34:43 Received message from Camera: op=State serial=88043 12:34:43 GetSingleValue result=40 Value=cccccccc 12:34:43 SkyScan query 12:34:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:34:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:43 Parameters OK 12:34:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:43 Set A/D data flow result=40 12:34:43 Set A/D channel type result=40 12:34:43 Set A/D encoding result=40 12:34:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:43 Set channel filter=0.000000e+000 result=40 12:34:43 Config A/D Result=40 12:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:43 Get A/D filter: -9.255963e+061 result=40 12:34:43 Get A/D value=-858993460 result=40 12:34:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:43 Parameters OK 12:34:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:43 Set A/D data flow result=40 12:34:43 Set A/D channel type result=40 12:34:43 Set A/D encoding result=40 12:34:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:43 Set channel filter=0.000000e+000 result=40 12:34:43 Config A/D Result=40 12:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:43 Get A/D filter: -9.255963e+061 result=40 12:34:43 Get A/D value=-858993460 result=40 12:34:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:43 Aux= 12:34:43 Message to Camera, serial 88043 queued 12:35:20 Received message from Master: op=PointingHead serial=88056 12:35:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:35:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:35:20 Point started: ret=0 12:35:20 point_skyscan result=0 12:35:21 Check angles 12:35:21 SkyScan query 12:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:35:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:35:22 Message to Master queued w/err=0: serial=88056 error=0 12:35:27 Received message from Master: op=Filter serial=88057 12:35:27 Color wheel filter change from 0 to 0 12:35:27 FLIGetFilterPos err=0 currentPosition=0 12:35:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:27 Filter is already there-color wheel unchanged 12:35:27 Received message from Master: op=Shutter serial=88058 12:35:27 Shutter LASER close 12:35:27 Received message from Camera: op=State serial=88060 12:35:27 GetSingleValue result=40 Value=cccccccc 12:35:27 SkyScan query 12:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:35:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:28 Parameters OK 12:35:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:28 Set A/D data flow result=40 12:35:28 Set A/D channel type result=40 12:35:28 Set A/D encoding result=40 12:35:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:28 Set channel filter=0.000000e+000 result=40 12:35:28 Config A/D Result=40 12:35:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:28 Get A/D filter: -9.255963e+061 result=40 12:35:28 Get A/D value=-858993460 result=40 12:35:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:28 Parameters OK 12:35:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:28 Set A/D data flow result=40 12:35:28 Set A/D channel type result=40 12:35:28 Set A/D encoding result=40 12:35:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:28 Set channel filter=0.000000e+000 result=40 12:35:28 Config A/D Result=40 12:35:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:28 Get A/D filter: -9.255963e+061 result=40 12:35:28 Get A/D value=-858993460 result=40 12:35:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:28 Aux= 12:35:28 Message to Camera, serial 88060 queued 12:36:04 Received message from Master: op=PointingHead serial=88073 12:36:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:36:04 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:36:05 Point started: ret=0 12:36:05 point_skyscan result=0 12:36:05 Check angles 12:36:05 SkyScan query 12:36:06 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 12:36:06 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 12:36:06 Check angles 12:36:06 SkyScan query 12:36:07 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 12:36:07 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 12:36:07 Check angles 12:36:07 SkyScan query 12:36:08 SkyScan query done: ret=0 az=171.405<-11427 ze=-6.495<-12433 Statuses=0009 0008 12:36:08 Msec=1500 True Az=171.405 Ze=-6.495 Az status=0009 Ze status=0008 12:36:08 Check angles 12:36:08 SkyScan query 12:36:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:36:08 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:36:08 Message to Master queued w/err=0: serial=88073 error=0 12:36:13 Received message from Master: op=Filter serial=88074 12:36:13 Color wheel filter change from 0 to 0 12:36:13 FLIGetFilterPos err=0 currentPosition=0 12:36:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:13 Filter is already there-color wheel unchanged 12:36:13 Received message from Master: op=Shutter serial=88075 12:36:13 Shutter LASER close 12:36:14 Received message from Camera: op=State serial=88077 12:36:14 GetSingleValue result=40 Value=cccccccc 12:36:14 SkyScan query 12:36:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:36:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:14 Parameters OK 12:36:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:14 Set A/D data flow result=40 12:36:14 Set A/D channel type result=40 12:36:14 Set A/D encoding result=40 12:36:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:14 Set channel filter=0.000000e+000 result=40 12:36:14 Config A/D Result=40 12:36:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:14 Get A/D filter: -9.255963e+061 result=40 12:36:14 Get A/D value=-858993460 result=40 12:36:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:14 Parameters OK 12:36:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:14 Set A/D data flow result=40 12:36:14 Set A/D channel type result=40 12:36:14 Set A/D encoding result=40 12:36:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:14 Set channel filter=0.000000e+000 result=40 12:36:14 Config A/D Result=40 12:36:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:14 Get A/D filter: -9.255963e+061 result=40 12:36:14 Get A/D value=-858993460 result=40 12:36:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:14 Aux= 12:36:14 Message to Camera, serial 88077 queued 12:36:51 Received message from Master: op=PointingHead serial=88090 12:36:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:36:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:36:51 Point started: ret=0 12:36:51 point_skyscan result=0 12:36:52 Check angles 12:36:52 SkyScan query 12:36:53 SkyScan query done: ret=0 az=152.505<-10167 ze=6.51<-11566 Statuses=0009 0008 12:36:53 Msec=0 True Az=152.505 Ze=6.51 Az status=0009 Ze status=0008 12:36:53 Check angles 12:36:53 SkyScan query 12:36:53 SkyScan query done: ret=0 az=135.03<-9002 ze=6.495<-11567 Statuses=0009 0008 12:36:53 Msec=750 True Az=135.03 Ze=6.495 Az status=0009 Ze status=0008 12:36:54 Check angles 12:36:54 SkyScan query 12:36:54 SkyScan query done: ret=0 az=117.18<-7812 ze=6.495<-11567 Statuses=0009 0008 12:36:54 Msec=1500 True Az=117.18 Ze=6.495 Az status=0009 Ze status=0008 12:36:54 Check angles 12:36:54 SkyScan query 12:36:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:36:55 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:36:55 Message to Master queued w/err=0: serial=88090 error=0 12:37:00 Received message from Master: op=Filter serial=88091 12:37:00 Color wheel filter change from 0 to 0 12:37:00 FLIGetFilterPos err=0 currentPosition=0 12:37:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:00 Filter is already there-color wheel unchanged 12:37:00 Received message from Master: op=Shutter serial=88092 12:37:00 Shutter LASER close 12:37:00 Received message from Camera: op=State serial=88094 12:37:00 GetSingleValue result=40 Value=cccccccc 12:37:00 SkyScan query 12:37:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:37:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:01 Parameters OK 12:37:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:01 Set A/D data flow result=40 12:37:01 Set A/D channel type result=40 12:37:01 Set A/D encoding result=40 12:37:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:01 Set channel filter=0.000000e+000 result=40 12:37:01 Config A/D Result=40 12:37:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:01 Get A/D filter: -9.255963e+061 result=40 12:37:01 Get A/D value=-858993460 result=40 12:37:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:01 Parameters OK 12:37:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:01 Set A/D data flow result=40 12:37:01 Set A/D channel type result=40 12:37:01 Set A/D encoding result=40 12:37:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:01 Set channel filter=0.000000e+000 result=40 12:37:01 Config A/D Result=40 12:37:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:01 Get A/D filter: -9.255963e+061 result=40 12:37:01 Get A/D value=-858993460 result=40 12:37:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:01 Aux= 12:37:01 Message to Camera, serial 88094 queued 12:37:37 Received message from Master: op=PointingHead serial=88107 12:37:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:37:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:37:38 Point started: ret=0 12:37:38 point_skyscan result=0 12:37:39 Check angles 12:37:39 SkyScan query 12:37:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.98<-13532 Statuses=0008 0009 12:37:39 Msec=0 True Az=112.995 Ze=-22.98 Az status=0008 Ze status=0009 12:37:39 Check angles 12:37:39 SkyScan query 12:37:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.965<-14931 Statuses=0008 0009 12:37:40 Msec=750 True Az=112.995 Ze=-43.965 Az status=0008 Ze status=0009 12:37:40 Check angles 12:37:40 SkyScan query 12:37:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.92<-16328 Statuses=0008 0009 12:37:41 Msec=1500 True Az=112.995 Ze=-64.92 Az status=0008 Ze status=0009 12:37:41 Check angles 12:37:41 SkyScan query 12:37:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.89<-17726 Statuses=0008 0009 12:37:41 Msec=2250 True Az=112.995 Ze=-85.89 Az status=0008 Ze status=0009 12:37:42 Check angles 12:37:42 SkyScan query 12:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.815<-19121 Statuses=0008 0009 12:37:42 Msec=3000 True Az=112.995 Ze=-106.815 Az status=0008 Ze status=0009 12:37:42 Check angles 12:37:42 SkyScan query 12:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.785<-20519 Statuses=0008 0009 12:37:43 Msec=3750 True Az=112.995 Ze=-127.785 Az status=0008 Ze status=0009 12:37:43 Check angles 12:37:43 SkyScan query 12:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.725<-21915 Statuses=0008 0009 12:37:44 Msec=4500 True Az=112.995 Ze=-148.725 Az status=0008 Ze status=0009 12:37:44 Check angles 12:37:44 SkyScan query 12:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.665<-23311 Statuses=0008 0009 12:37:44 Msec=5250 True Az=112.995 Ze=-169.665 Az status=0008 Ze status=0009 12:37:45 Check angles 12:37:45 SkyScan query 12:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:37:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:37:45 Message to Master queued w/err=0: serial=88107 error=0 12:37:50 Received message from Master: op=Filter serial=88108 12:37:50 Color wheel filter change from 0 to 0 12:37:50 FLIGetFilterPos err=0 currentPosition=0 12:37:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:50 Filter is already there-color wheel unchanged 12:37:50 Received message from Master: op=Shutter serial=88109 12:37:50 Shutter LASER open 12:37:51 Received message from Camera: op=State serial=88111 12:37:51 GetSingleValue result=40 Value=cccccccc 12:37:51 SkyScan query 12:37:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:37:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:51 Parameters OK 12:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:51 Set A/D data flow result=40 12:37:51 Set A/D channel type result=40 12:37:51 Set A/D encoding result=40 12:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:51 Set channel filter=0.000000e+000 result=40 12:37:51 Config A/D Result=40 12:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:51 Get A/D filter: -9.255963e+061 result=40 12:37:51 Get A/D value=-858993460 result=40 12:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:51 Parameters OK 12:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:51 Set A/D data flow result=40 12:37:51 Set A/D channel type result=40 12:37:51 Set A/D encoding result=40 12:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:51 Set channel filter=0.000000e+000 result=40 12:37:51 Config A/D Result=40 12:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:51 Get A/D filter: -9.255963e+061 result=40 12:37:51 Get A/D value=-858993460 result=40 12:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:51 Aux= 12:37:51 Message to Camera, serial 88111 queued 12:37:59 Received message from Master: op=Shutter serial=88120 12:37:59 Shutter LASER close 12:37:59 Received message from Master: op=PointingHead serial=88124 12:37:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:37:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:37:59 Point started: ret=0 12:37:59 point_skyscan result=0 12:38:00 Check angles 12:38:00 SkyScan query 12:38:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 12:38:01 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 12:38:01 Check angles 12:38:01 SkyScan query 12:38:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.905<-20127 Statuses=0008 0009 12:38:01 Msec=750 True Az=112.995 Ze=-121.905 Az status=0008 Ze status=0009 12:38:02 Check angles 12:38:02 SkyScan query 12:38:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.545<-18703 Statuses=0008 0009 12:38:02 Msec=1500 True Az=112.995 Ze=-100.545 Az status=0008 Ze status=0009 12:38:02 Check angles 12:38:02 SkyScan query 12:38:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.575<-17305 Statuses=0008 0009 12:38:03 Msec=2250 True Az=112.995 Ze=-79.575 Az status=0008 Ze status=0009 12:38:03 Check angles 12:38:03 SkyScan query 12:38:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.62<-15908 Statuses=0008 0009 12:38:04 Msec=3000 True Az=112.995 Ze=-58.62 Az status=0008 Ze status=0009 12:38:04 Check angles 12:38:04 SkyScan query 12:38:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.245<-14483 Statuses=0008 0009 12:38:04 Msec=3750 True Az=112.995 Ze=-37.245 Az status=0008 Ze status=0009 12:38:05 Check angles 12:38:05 SkyScan query 12:38:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.275<-13085 Statuses=0008 0009 12:38:05 Msec=4500 True Az=112.995 Ze=-16.275 Az status=0008 Ze status=0009 12:38:05 Check angles 12:38:05 SkyScan query 12:38:06 SkyScan query done: ret=0 az=112.995<-7533 ze=4.545<-11697 Statuses=0008 0009 12:38:06 Msec=5250 True Az=112.995 Ze=4.545 Az status=0008 Ze status=0009 12:38:06 Check angles 12:38:06 SkyScan query 12:38:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:38:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:38:07 Message to Master queued w/err=0: serial=88124 error=0 12:38:12 Received message from Master: op=Filter serial=88125 12:38:12 Color wheel filter change from 0 to 0 12:38:12 FLIGetFilterPos err=0 currentPosition=0 12:38:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:12 Filter is already there-color wheel unchanged 12:38:12 Received message from Master: op=Shutter serial=88126 12:38:12 Shutter LASER close 12:38:12 Received message from Camera: op=State serial=88128 12:38:12 GetSingleValue result=40 Value=cccccccc 12:38:12 SkyScan query 12:38:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:38:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:13 Parameters OK 12:38:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:13 Set A/D data flow result=40 12:38:13 Set A/D channel type result=40 12:38:13 Set A/D encoding result=40 12:38:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:13 Set channel filter=0.000000e+000 result=40 12:38:13 Config A/D Result=40 12:38:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:13 Get A/D filter: -9.255963e+061 result=40 12:38:13 Get A/D value=-858993460 result=40 12:38:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:13 Parameters OK 12:38:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:13 Set A/D data flow result=40 12:38:13 Set A/D channel type result=40 12:38:13 Set A/D encoding result=40 12:38:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:13 Set channel filter=0.000000e+000 result=40 12:38:13 Config A/D Result=40 12:38:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:13 Get A/D filter: -9.255963e+061 result=40 12:38:13 Get A/D value=-858993460 result=40 12:38:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:13 Aux= 12:38:13 Message to Camera, serial 88128 queued 12:38:50 Received message from Master: op=PointingHead serial=88141 12:38:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:38:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:38:50 Point started: ret=0 12:38:50 point_skyscan result=0 12:38:51 Check angles 12:38:51 SkyScan query 12:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:38:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:38:51 Message to Master queued w/err=0: serial=88141 error=0 12:38:56 Received message from Master: op=Filter serial=88142 12:38:56 Color wheel filter change from 0 to 0 12:38:56 FLIGetFilterPos err=0 currentPosition=0 12:38:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:56 Filter is already there-color wheel unchanged 12:38:56 Received message from Master: op=Shutter serial=88143 12:38:56 Shutter LASER close 12:38:56 Received message from Camera: op=State serial=88145 12:38:56 GetSingleValue result=40 Value=cccccccc 12:38:56 SkyScan query 12:38:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:38:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:57 Parameters OK 12:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:57 Set A/D data flow result=40 12:38:57 Set A/D channel type result=40 12:38:57 Set A/D encoding result=40 12:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:57 Set channel filter=0.000000e+000 result=40 12:38:57 Config A/D Result=40 12:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:57 Get A/D filter: -9.255963e+061 result=40 12:38:57 Get A/D value=-858993460 result=40 12:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:57 Parameters OK 12:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:57 Set A/D data flow result=40 12:38:57 Set A/D channel type result=40 12:38:57 Set A/D encoding result=40 12:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:57 Set channel filter=0.000000e+000 result=40 12:38:57 Config A/D Result=40 12:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:57 Get A/D filter: -9.255963e+061 result=40 12:38:57 Get A/D value=-858993460 result=40 12:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:57 Aux= 12:38:57 Message to Camera, serial 88145 queued 12:39:34 Received message from Master: op=PointingHead serial=88158 12:39:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:39:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:39:34 Point started: ret=0 12:39:34 point_skyscan result=0 12:39:35 Check angles 12:39:35 SkyScan query 12:39:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:39:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:39:35 Message to Master queued w/err=0: serial=88158 error=0 12:39:40 Received message from Master: op=Filter serial=88159 12:39:40 Color wheel filter change from 0 to 0 12:39:40 FLIGetFilterPos err=0 currentPosition=0 12:39:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:40 Filter is already there-color wheel unchanged 12:39:41 Received message from Master: op=Shutter serial=88160 12:39:41 Shutter LASER close 12:39:41 Received message from Camera: op=State serial=88162 12:39:41 GetSingleValue result=40 Value=cccccccc 12:39:41 SkyScan query 12:39:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:39:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:41 Parameters OK 12:39:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:41 Set A/D data flow result=40 12:39:41 Set A/D channel type result=40 12:39:41 Set A/D encoding result=40 12:39:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:41 Set channel filter=0.000000e+000 result=40 12:39:41 Config A/D Result=40 12:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:41 Get A/D filter: -9.255963e+061 result=40 12:39:41 Get A/D value=-858993460 result=40 12:39:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:41 Parameters OK 12:39:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:41 Set A/D data flow result=40 12:39:41 Set A/D channel type result=40 12:39:41 Set A/D encoding result=40 12:39:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:41 Set channel filter=0.000000e+000 result=40 12:39:41 Config A/D Result=40 12:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:41 Get A/D filter: -9.255963e+061 result=40 12:39:41 Get A/D value=-858993460 result=40 12:39:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:41 Aux= 12:39:41 Message to Camera, serial 88162 queued 12:40:18 Received message from Master: op=PointingHead serial=88175 12:40:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:40:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:40:18 Point started: ret=0 12:40:18 point_skyscan result=0 12:40:19 Check angles 12:40:19 SkyScan query 12:40:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:40:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:40:20 Message to Master queued w/err=0: serial=88175 error=0 12:40:25 Received message from Master: op=Filter serial=88176 12:40:25 Color wheel filter change from 0 to 0 12:40:25 FLIGetFilterPos err=0 currentPosition=0 12:40:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:25 Filter is already there-color wheel unchanged 12:40:25 Received message from Master: op=Shutter serial=88177 12:40:25 Shutter LASER close 12:40:25 Received message from Camera: op=State serial=88179 12:40:25 GetSingleValue result=40 Value=cccccccc 12:40:25 SkyScan query 12:40:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:40:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:26 Parameters OK 12:40:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:26 Set A/D data flow result=40 12:40:26 Set A/D channel type result=40 12:40:26 Set A/D encoding result=40 12:40:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:26 Set channel filter=0.000000e+000 result=40 12:40:26 Config A/D Result=40 12:40:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:26 Get A/D filter: -9.255963e+061 result=40 12:40:26 Get A/D value=-858993460 result=40 12:40:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:26 Parameters OK 12:40:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:26 Set A/D data flow result=40 12:40:26 Set A/D channel type result=40 12:40:26 Set A/D encoding result=40 12:40:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:26 Set channel filter=0.000000e+000 result=40 12:40:26 Config A/D Result=40 12:40:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:26 Get A/D filter: -9.255963e+061 result=40 12:40:26 Get A/D value=-858993460 result=40 12:40:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:26 Aux= 12:40:26 Message to Camera, serial 88179 queued 12:41:02 Received message from Master: op=PointingHead serial=88192 12:41:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:41:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:41:03 Point started: ret=0 12:41:03 point_skyscan result=0 12:41:04 Check angles 12:41:04 SkyScan query 12:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 12:41:04 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 12:41:04 Check angles 12:41:04 SkyScan query 12:41:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 12:41:05 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 12:41:05 Check angles 12:41:05 SkyScan query 12:41:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 12:41:06 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 12:41:06 Check angles 12:41:06 SkyScan query 12:41:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 12:41:06 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 12:41:07 Check angles 12:41:07 SkyScan query 12:41:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 12:41:07 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 12:41:07 Check angles 12:41:07 SkyScan query 12:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.805<-20587 Statuses=0008 0009 12:41:08 Msec=3750 True Az=112.995 Ze=-128.805 Az status=0008 Ze status=0009 12:41:08 Check angles 12:41:08 SkyScan query 12:41:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.21<-22014 Statuses=0008 0009 12:41:09 Msec=4500 True Az=112.995 Ze=-150.21 Az status=0008 Ze status=0009 12:41:09 Check angles 12:41:09 SkyScan query 12:41:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.36<-23424 Statuses=0008 0009 12:41:09 Msec=5250 True Az=112.995 Ze=-171.36 Az status=0008 Ze status=0009 12:41:10 Check angles 12:41:10 SkyScan query 12:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:41:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:41:10 Message to Master queued w/err=0: serial=88192 error=0 12:41:15 Received message from Master: op=Filter serial=88193 12:41:15 Color wheel filter change from 0 to 0 12:41:15 FLIGetFilterPos err=0 currentPosition=0 12:41:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:15 Filter is already there-color wheel unchanged 12:41:15 Received message from Master: op=Shutter serial=88194 12:41:15 Shutter LASER open 12:41:16 Received message from Camera: op=State serial=88196 12:41:16 GetSingleValue result=40 Value=cccccccc 12:41:16 SkyScan query 12:41:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:41:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:16 Parameters OK 12:41:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:16 Set A/D data flow result=40 12:41:16 Set A/D channel type result=40 12:41:16 Set A/D encoding result=40 12:41:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:16 Set channel filter=0.000000e+000 result=40 12:41:16 Config A/D Result=40 12:41:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:16 Get A/D filter: -9.255963e+061 result=40 12:41:16 Get A/D value=-858993460 result=40 12:41:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:16 Parameters OK 12:41:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:16 Set A/D data flow result=40 12:41:16 Set A/D channel type result=40 12:41:16 Set A/D encoding result=40 12:41:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:16 Set channel filter=0.000000e+000 result=40 12:41:16 Config A/D Result=40 12:41:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:16 Get A/D filter: -9.255963e+061 result=40 12:41:16 Get A/D value=-858993460 result=40 12:41:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:16 Aux= 12:41:16 Message to Camera, serial 88196 queued 12:41:25 Received message from Master: op=Shutter serial=88206 12:41:25 Shutter LASER close 12:41:25 Received message from Master: op=PointingHead serial=88210 12:41:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:41:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:41:25 Point started: ret=0 12:41:25 point_skyscan result=0 12:41:26 Check angles 12:41:26 SkyScan query 12:41:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 12:41:27 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 12:41:27 Check angles 12:41:27 SkyScan query 12:41:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 12:41:27 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 12:41:28 Check angles 12:41:28 SkyScan query 12:41:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.62<-18708 Statuses=0008 0009 12:41:28 Msec=1500 True Az=112.995 Ze=-100.62 Az status=0008 Ze status=0009 12:41:28 Check angles 12:41:28 SkyScan query 12:41:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.665<-17311 Statuses=0008 0009 12:41:29 Msec=2250 True Az=112.995 Ze=-79.665 Az status=0008 Ze status=0009 12:41:29 Check angles 12:41:29 SkyScan query 12:41:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 12:41:30 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 12:41:30 Check angles 12:41:30 SkyScan query 12:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.32<-14488 Statuses=0008 0009 12:41:31 Msec=3750 True Az=112.995 Ze=-37.32 Az status=0008 Ze status=0009 12:41:31 Check angles 12:41:31 SkyScan query 12:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.885<-13059 Statuses=0008 0009 12:41:31 Msec=4500 True Az=112.995 Ze=-15.885 Az status=0008 Ze status=0009 12:41:31 Check angles 12:41:31 SkyScan query 12:41:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.83<-11678 Statuses=0008 0009 12:41:32 Msec=5250 True Az=112.995 Ze=4.83 Az status=0008 Ze status=0009 12:41:32 Check angles 12:41:32 SkyScan query 12:41:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:41:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:41:33 Message to Master queued w/err=0: serial=88210 error=0 12:41:38 Received message from Master: op=Filter serial=88211 12:41:38 Color wheel filter change from 0 to 0 12:41:38 FLIGetFilterPos err=0 currentPosition=0 12:41:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:38 Filter is already there-color wheel unchanged 12:41:38 Received message from Master: op=Shutter serial=88212 12:41:38 Shutter LASER close 12:41:38 Received message from Camera: op=State serial=88214 12:41:38 GetSingleValue result=40 Value=cccccccc 12:41:38 SkyScan query 12:41:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:41:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:39 Parameters OK 12:41:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:39 Set A/D data flow result=40 12:41:39 Set A/D channel type result=40 12:41:39 Set A/D encoding result=40 12:41:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:39 Set channel filter=0.000000e+000 result=40 12:41:39 Config A/D Result=40 12:41:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:39 Get A/D filter: -9.255963e+061 result=40 12:41:39 Get A/D value=-858993460 result=40 12:41:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:39 Parameters OK 12:41:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:39 Set A/D data flow result=40 12:41:39 Set A/D channel type result=40 12:41:39 Set A/D encoding result=40 12:41:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:39 Set channel filter=0.000000e+000 result=40 12:41:39 Config A/D Result=40 12:41:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:39 Get A/D filter: -9.255963e+061 result=40 12:41:39 Get A/D value=-858993460 result=40 12:41:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:39 Aux= 12:41:39 Message to Camera, serial 88214 queued 12:42:16 Received message from Master: op=PointingHead serial=88227 12:42:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:42:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:42:16 Point started: ret=0 12:42:16 point_skyscan result=0 12:42:17 Check angles 12:42:17 SkyScan query 12:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:42:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:42:17 Message to Master queued w/err=0: serial=88227 error=0 12:42:22 Received message from Master: op=Filter serial=88228 12:42:22 Color wheel filter change from 0 to 0 12:42:22 FLIGetFilterPos err=0 currentPosition=0 12:42:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:22 Filter is already there-color wheel unchanged 12:42:22 Received message from Master: op=Shutter serial=88229 12:42:22 Shutter LASER close 12:42:22 Received message from Camera: op=State serial=88231 12:42:22 GetSingleValue result=40 Value=cccccccc 12:42:22 SkyScan query 12:42:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:42:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:23 Parameters OK 12:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:23 Set A/D data flow result=40 12:42:23 Set A/D channel type result=40 12:42:23 Set A/D encoding result=40 12:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:23 Set channel filter=0.000000e+000 result=40 12:42:23 Config A/D Result=40 12:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:23 Get A/D filter: -9.255963e+061 result=40 12:42:23 Get A/D value=-858993460 result=40 12:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:23 Parameters OK 12:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:23 Set A/D data flow result=40 12:42:23 Set A/D channel type result=40 12:42:23 Set A/D encoding result=40 12:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:23 Set channel filter=0.000000e+000 result=40 12:42:23 Config A/D Result=40 12:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:23 Get A/D filter: -9.255963e+061 result=40 12:42:23 Get A/D value=-858993460 result=40 12:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:23 Aux= 12:42:23 Message to Camera, serial 88231 queued 12:43:00 Received message from Master: op=PointingHead serial=88244 12:43:00 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:43:00 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:43:00 Point started: ret=0 12:43:00 point_skyscan result=0 12:43:01 Check angles 12:43:01 SkyScan query 12:43:02 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 12:43:02 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 12:43:02 Check angles 12:43:02 SkyScan query 12:43:02 SkyScan query done: ret=0 az=153.81<-10254 ze=-6.495<-12433 Statuses=0009 0008 12:43:02 Msec=750 True Az=153.81 Ze=-6.495 Az status=0009 Ze status=0008 12:43:02 Check angles 12:43:02 SkyScan query 12:43:03 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 12:43:03 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 12:43:03 Check angles 12:43:03 SkyScan query 12:43:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:43:04 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:43:04 Message to Master queued w/err=0: serial=88244 error=0 12:43:09 Received message from Master: op=Filter serial=88245 12:43:09 Color wheel filter change from 0 to 0 12:43:09 FLIGetFilterPos err=0 currentPosition=0 12:43:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:09 Filter is already there-color wheel unchanged 12:43:09 Received message from Master: op=Shutter serial=88246 12:43:09 Shutter LASER close 12:43:09 Received message from Camera: op=State serial=88248 12:43:09 GetSingleValue result=40 Value=cccccccc 12:43:09 SkyScan query 12:43:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:43:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:10 Parameters OK 12:43:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:10 Set A/D data flow result=40 12:43:10 Set A/D channel type result=40 12:43:10 Set A/D encoding result=40 12:43:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:10 Set channel filter=0.000000e+000 result=40 12:43:10 Config A/D Result=40 12:43:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:10 Get A/D filter: -9.255963e+061 result=40 12:43:10 Get A/D value=-858993460 result=40 12:43:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:10 Parameters OK 12:43:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:10 Set A/D data flow result=40 12:43:10 Set A/D channel type result=40 12:43:10 Set A/D encoding result=40 12:43:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:10 Set channel filter=0.000000e+000 result=40 12:43:10 Config A/D Result=40 12:43:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:10 Get A/D filter: -9.255963e+061 result=40 12:43:10 Get A/D value=-858993460 result=40 12:43:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:10 Aux= 12:43:10 Message to Camera, serial 88248 queued 12:43:46 Received message from Master: op=PointingHead serial=88261 12:43:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:43:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:43:47 Point started: ret=0 12:43:47 point_skyscan result=0 12:43:48 Check angles 12:43:48 SkyScan query 12:43:48 SkyScan query done: ret=0 az=152.895<-10193 ze=6.51<-11566 Statuses=0009 0008 12:43:48 Msec=0 True Az=152.895 Ze=6.51 Az status=0009 Ze status=0008 12:43:48 Check angles 12:43:48 SkyScan query 12:43:49 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 12:43:49 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 12:43:49 Check angles 12:43:49 SkyScan query 12:43:50 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 12:43:50 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 12:43:50 Check angles 12:43:50 SkyScan query 12:43:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:43:50 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:43:50 Message to Master queued w/err=0: serial=88261 error=0 [UTC 2019-3-3 12:43:50] 12:43:55 Received message from Master: op=Filter serial=88262 12:43:55 Color wheel filter change from 0 to 0 12:43:55 FLIGetFilterPos err=0 currentPosition=0 12:43:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:55 Filter is already there-color wheel unchanged 12:43:56 Received message from Master: op=Shutter serial=88263 12:43:56 Shutter LASER close 12:43:56 Received message from Camera: op=State serial=88265 12:43:56 GetSingleValue result=40 Value=cccccccc 12:43:56 SkyScan query 12:43:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:43:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:56 Parameters OK 12:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:56 Set A/D data flow result=40 12:43:56 Set A/D channel type result=40 12:43:56 Set A/D encoding result=40 12:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:56 Set channel filter=0.000000e+000 result=40 12:43:56 Config A/D Result=40 12:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:56 Get A/D filter: -9.255963e+061 result=40 12:43:56 Get A/D value=-858993460 result=40 12:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:56 Parameters OK 12:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:56 Set A/D data flow result=40 12:43:56 Set A/D channel type result=40 12:43:56 Set A/D encoding result=40 12:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:56 Set channel filter=0.000000e+000 result=40 12:43:56 Config A/D Result=40 12:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:56 Get A/D filter: -9.255963e+061 result=40 12:43:56 Get A/D value=-858993460 result=40 12:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:56 Aux= 12:43:56 Message to Camera, serial 88265 queued 12:44:33 Received message from Master: op=PointingHead serial=88278 12:44:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:44:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:44:33 Point started: ret=0 12:44:33 point_skyscan result=0 12:44:34 Check angles 12:44:34 SkyScan query 12:44:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 12:44:35 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 12:44:35 Check angles 12:44:35 SkyScan query 12:44:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 12:44:35 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 12:44:36 Check angles 12:44:36 SkyScan query 12:44:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.25<-16350 Statuses=0008 0009 12:44:36 Msec=1500 True Az=112.995 Ze=-65.25 Az status=0008 Ze status=0009 12:44:36 Check angles 12:44:36 SkyScan query 12:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 12:44:37 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 12:44:37 Check angles 12:44:37 SkyScan query 12:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.595<-19173 Statuses=0008 0009 12:44:38 Msec=3000 True Az=112.995 Ze=-107.595 Az status=0008 Ze status=0009 12:44:38 Check angles 12:44:38 SkyScan query 12:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.535<-20569 Statuses=0008 0009 12:44:38 Msec=3750 True Az=112.995 Ze=-128.535 Az status=0008 Ze status=0009 12:44:39 Check angles 12:44:39 SkyScan query 12:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.94<-21996 Statuses=0008 0009 12:44:39 Msec=4500 True Az=112.995 Ze=-149.94 Az status=0008 Ze status=0009 12:44:39 Check angles 12:44:39 SkyScan query 12:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.805<-23387 Statuses=0008 0009 12:44:40 Msec=5250 True Az=112.995 Ze=-170.805 Az status=0008 Ze status=0009 12:44:40 Check angles 12:44:40 SkyScan query 12:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:44:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:44:41 Message to Master queued w/err=0: serial=88278 error=0 12:44:46 Received message from Master: op=Filter serial=88279 12:44:46 Color wheel filter change from 0 to 0 12:44:46 FLIGetFilterPos err=0 currentPosition=0 12:44:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:46 Filter is already there-color wheel unchanged 12:44:46 Received message from Master: op=Shutter serial=88280 12:44:46 Shutter LASER open 12:44:46 Received message from Camera: op=State serial=88282 12:44:46 GetSingleValue result=40 Value=cccccccc 12:44:46 SkyScan query 12:44:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:44:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:47 Parameters OK 12:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:47 Set A/D data flow result=40 12:44:47 Set A/D channel type result=40 12:44:47 Set A/D encoding result=40 12:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:47 Set channel filter=0.000000e+000 result=40 12:44:47 Config A/D Result=40 12:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:47 Get A/D filter: -9.255963e+061 result=40 12:44:47 Get A/D value=-858993460 result=40 12:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:47 Parameters OK 12:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:47 Set A/D data flow result=40 12:44:47 Set A/D channel type result=40 12:44:47 Set A/D encoding result=40 12:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:47 Set channel filter=0.000000e+000 result=40 12:44:47 Config A/D Result=40 12:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:47 Get A/D filter: -9.255963e+061 result=40 12:44:47 Get A/D value=-858993460 result=40 12:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:47 Aux= 12:44:47 Message to Camera, serial 88282 queued 12:44:55 Received message from Master: op=Shutter serial=88292 12:44:55 Shutter LASER close 12:44:55 Received message from Master: op=PointingHead serial=88296 12:44:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:44:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:44:56 Point started: ret=0 12:44:56 point_skyscan result=0 12:44:57 Check angles 12:44:57 SkyScan query 12:44:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 12:44:57 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 12:44:57 Check angles 12:44:57 SkyScan query 12:44:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 12:44:58 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 12:44:58 Check angles 12:44:58 SkyScan query 12:44:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 12:44:59 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 12:44:59 Check angles 12:44:59 SkyScan query 12:44:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.53<-17302 Statuses=0008 0009 12:44:59 Msec=2250 True Az=112.995 Ze=-79.53 Az status=0008 Ze status=0009 12:45:00 Check angles 12:45:00 SkyScan query 12:45:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.59<-15906 Statuses=0008 0009 12:45:00 Msec=3000 True Az=112.995 Ze=-58.59 Az status=0008 Ze status=0009 12:45:00 Check angles 12:45:00 SkyScan query 12:45:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 12:45:01 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 12:45:01 Check angles 12:45:01 SkyScan query 12:45:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.23<-13082 Statuses=0008 0009 12:45:02 Msec=4500 True Az=112.995 Ze=-16.23 Az status=0008 Ze status=0009 12:45:02 Check angles 12:45:02 SkyScan query 12:45:02 SkyScan query done: ret=0 az=112.995<-7533 ze=4.59<-11694 Statuses=0008 0009 12:45:02 Msec=5250 True Az=112.995 Ze=4.59 Az status=0008 Ze status=0009 12:45:03 Check angles 12:45:03 SkyScan query 12:45:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:45:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:45:03 Message to Master queued w/err=0: serial=88296 error=0 12:45:08 Received message from Master: op=Filter serial=88297 12:45:08 Color wheel filter change from 0 to 0 12:45:08 FLIGetFilterPos err=0 currentPosition=0 12:45:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:08 Filter is already there-color wheel unchanged 12:45:08 Received message from Master: op=Shutter serial=88298 12:45:08 Shutter LASER close 12:45:09 Received message from Camera: op=State serial=88300 12:45:09 GetSingleValue result=40 Value=cccccccc 12:45:09 SkyScan query 12:45:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:45:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:09 Parameters OK 12:45:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:09 Set A/D data flow result=40 12:45:09 Set A/D channel type result=40 12:45:09 Set A/D encoding result=40 12:45:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:09 Set channel filter=0.000000e+000 result=40 12:45:09 Config A/D Result=40 12:45:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:09 Get A/D filter: -9.255963e+061 result=40 12:45:09 Get A/D value=-858993460 result=40 12:45:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:09 Parameters OK 12:45:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:09 Set A/D data flow result=40 12:45:09 Set A/D channel type result=40 12:45:09 Set A/D encoding result=40 12:45:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:09 Set channel filter=0.000000e+000 result=40 12:45:09 Config A/D Result=40 12:45:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:09 Get A/D filter: -9.255963e+061 result=40 12:45:09 Get A/D value=-858993460 result=40 12:45:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:09 Aux= 12:45:09 Message to Camera, serial 88300 queued 12:45:45 Received message from Master: op=PointingHead serial=88312 12:45:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:45:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:45:45 Point started: ret=0 12:45:45 point_skyscan result=0 12:45:46 Check angles 12:45:46 SkyScan query 12:45:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:45:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:45:47 Message to Master queued w/err=0: serial=88312 error=0 12:45:52 Received message from Master: op=Filter serial=88313 12:45:52 Color wheel filter change from 0 to 0 12:45:52 FLIGetFilterPos err=0 currentPosition=0 12:45:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:52 Filter is already there-color wheel unchanged 12:45:52 Received message from Master: op=Shutter serial=88314 12:45:52 Shutter LASER close 12:45:52 Received message from Camera: op=State serial=88316 12:45:52 GetSingleValue result=40 Value=cccccccc 12:45:52 SkyScan query 12:45:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:45:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:52 Parameters OK 12:45:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:52 Set A/D data flow result=40 12:45:52 Set A/D channel type result=40 12:45:52 Set A/D encoding result=40 12:45:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:52 Set channel filter=0.000000e+000 result=40 12:45:52 Config A/D Result=40 12:45:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:52 Get A/D filter: -9.255963e+061 result=40 12:45:52 Get A/D value=-858993460 result=40 12:45:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:52 Parameters OK 12:45:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:52 Set A/D data flow result=40 12:45:52 Set A/D channel type result=40 12:45:52 Set A/D encoding result=40 12:45:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:52 Set channel filter=0.000000e+000 result=40 12:45:52 Config A/D Result=40 12:45:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:52 Get A/D filter: -9.255963e+061 result=40 12:45:52 Get A/D value=-858993460 result=40 12:45:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:52 Aux= 12:45:52 Message to Camera, serial 88316 queued 12:46:29 Received message from Master: op=PointingHead serial=88329 12:46:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:46:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:46:30 Point started: ret=0 12:46:30 point_skyscan result=0 12:46:30 Check angles 12:46:30 SkyScan query 12:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:46:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:46:31 Message to Master queued w/err=0: serial=88329 error=0 12:46:36 Received message from Master: op=Filter serial=88330 12:46:36 Color wheel filter change from 0 to 0 12:46:36 FLIGetFilterPos err=0 currentPosition=0 12:46:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:36 Filter is already there-color wheel unchanged 12:46:36 Received message from Master: op=Shutter serial=88331 12:46:36 Shutter LASER close 12:46:36 Received message from Camera: op=State serial=88333 12:46:36 GetSingleValue result=40 Value=cccccccc 12:46:36 SkyScan query 12:46:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:46:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:37 Parameters OK 12:46:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:37 Set A/D data flow result=40 12:46:37 Set A/D channel type result=40 12:46:37 Set A/D encoding result=40 12:46:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:37 Set channel filter=0.000000e+000 result=40 12:46:37 Config A/D Result=40 12:46:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:37 Get A/D filter: -9.255963e+061 result=40 12:46:37 Get A/D value=-858993460 result=40 12:46:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:37 Parameters OK 12:46:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:37 Set A/D data flow result=40 12:46:37 Set A/D channel type result=40 12:46:37 Set A/D encoding result=40 12:46:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:37 Set channel filter=0.000000e+000 result=40 12:46:37 Config A/D Result=40 12:46:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:37 Get A/D filter: -9.255963e+061 result=40 12:46:37 Get A/D value=-858993460 result=40 12:46:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:37 Aux= 12:46:37 Message to Camera, serial 88333 queued 12:47:14 Received message from Master: op=PointingHead serial=88346 12:47:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:47:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:47:14 Point started: ret=0 12:47:14 point_skyscan result=0 12:47:15 Check angles 12:47:15 SkyScan query 12:47:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:47:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:47:15 Message to Master queued w/err=0: serial=88346 error=0 12:47:20 Received message from Master: op=Filter serial=88347 12:47:20 Color wheel filter change from 0 to 0 12:47:20 FLIGetFilterPos err=0 currentPosition=0 12:47:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:20 Filter is already there-color wheel unchanged 12:47:20 Received message from Master: op=Shutter serial=88348 12:47:20 Shutter LASER close 12:47:20 Received message from Camera: op=State serial=88350 12:47:20 GetSingleValue result=40 Value=cccccccc 12:47:20 SkyScan query 12:47:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:47:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:21 Parameters OK 12:47:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:21 Set A/D data flow result=40 12:47:21 Set A/D channel type result=40 12:47:21 Set A/D encoding result=40 12:47:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:21 Set channel filter=0.000000e+000 result=40 12:47:21 Config A/D Result=40 12:47:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:21 Get A/D filter: -9.255963e+061 result=40 12:47:21 Get A/D value=-858993460 result=40 12:47:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:21 Parameters OK 12:47:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:21 Set A/D data flow result=40 12:47:21 Set A/D channel type result=40 12:47:21 Set A/D encoding result=40 12:47:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:21 Set channel filter=0.000000e+000 result=40 12:47:21 Config A/D Result=40 12:47:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:21 Get A/D filter: -9.255963e+061 result=40 12:47:21 Get A/D value=-858993460 result=40 12:47:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:21 Aux= 12:47:21 Message to Camera, serial 88350 queued 12:47:58 Received message from Master: op=PointingHead serial=88363 12:47:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:47:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:47:58 Point started: ret=0 12:47:58 point_skyscan result=0 12:47:59 Check angles 12:47:59 SkyScan query 12:48:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 12:48:00 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 12:48:00 Check angles 12:48:00 SkyScan query 12:48:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.325<-14955 Statuses=0008 0009 12:48:00 Msec=750 True Az=112.995 Ze=-44.325 Az status=0008 Ze status=0009 12:48:00 Check angles 12:48:00 SkyScan query 12:48:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.28<-16352 Statuses=0008 0009 12:48:01 Msec=1500 True Az=112.995 Ze=-65.28 Az status=0008 Ze status=0009 12:48:01 Check angles 12:48:01 SkyScan query 12:48:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.235<-17749 Statuses=0008 0009 12:48:02 Msec=2250 True Az=112.995 Ze=-86.235 Az status=0008 Ze status=0009 12:48:02 Check angles 12:48:02 SkyScan query 12:48:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.19<-19146 Statuses=0008 0009 12:48:03 Msec=3000 True Az=112.995 Ze=-107.19 Az status=0008 Ze status=0009 12:48:03 Check angles 12:48:03 SkyScan query 12:48:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.145<-20543 Statuses=0008 0009 12:48:03 Msec=3750 True Az=112.995 Ze=-128.145 Az status=0008 Ze status=0009 12:48:03 Check angles 12:48:03 SkyScan query 12:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.1<-21940 Statuses=0008 0009 12:48:04 Msec=4500 True Az=112.995 Ze=-149.1 Az status=0008 Ze status=0009 12:48:04 Check angles 12:48:04 SkyScan query 12:48:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.04<-23336 Statuses=0008 0009 12:48:05 Msec=5250 True Az=112.995 Ze=-170.04 Az status=0008 Ze status=0009 12:48:05 Check angles 12:48:05 SkyScan query 12:48:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:48:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:48:06 Message to Master queued w/err=0: serial=88363 error=0 12:48:11 Received message from Master: op=Filter serial=88364 12:48:11 Color wheel filter change from 0 to 0 12:48:11 FLIGetFilterPos err=0 currentPosition=0 12:48:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:11 Filter is already there-color wheel unchanged 12:48:11 Received message from Master: op=Shutter serial=88365 12:48:11 Shutter LASER open 12:48:11 Received message from Camera: op=State serial=88367 12:48:11 GetSingleValue result=40 Value=cccccccc 12:48:11 SkyScan query 12:48:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:48:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:11 Parameters OK 12:48:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:11 Set A/D data flow result=40 12:48:11 Set A/D channel type result=40 12:48:11 Set A/D encoding result=40 12:48:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:11 Set channel filter=0.000000e+000 result=40 12:48:11 Config A/D Result=40 12:48:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:11 Get A/D filter: -9.255963e+061 result=40 12:48:11 Get A/D value=-858993460 result=40 12:48:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:11 Parameters OK 12:48:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:11 Set A/D data flow result=40 12:48:11 Set A/D channel type result=40 12:48:11 Set A/D encoding result=40 12:48:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:11 Set channel filter=0.000000e+000 result=40 12:48:11 Config A/D Result=40 12:48:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:11 Get A/D filter: -9.255963e+061 result=40 12:48:11 Get A/D value=-858993460 result=40 12:48:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:11 Aux= 12:48:11 Message to Camera, serial 88367 queued 12:48:20 Received message from Master: op=Shutter serial=88377 12:48:20 Shutter LASER close 12:48:21 Received message from Master: op=PointingHead serial=88381 12:48:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:48:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:48:21 Point started: ret=0 12:48:21 point_skyscan result=0 12:48:22 Check angles 12:48:22 SkyScan query 12:48:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 12:48:22 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 12:48:22 Check angles 12:48:22 SkyScan query 12:48:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 12:48:23 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 12:48:23 Check angles 12:48:23 SkyScan query 12:48:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 12:48:24 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 12:48:24 Check angles 12:48:24 SkyScan query 12:48:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.89<-17326 Statuses=0008 0009 12:48:24 Msec=2250 True Az=112.995 Ze=-79.89 Az status=0008 Ze status=0009 12:48:25 Check angles 12:48:25 SkyScan query 12:48:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 12:48:25 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 12:48:25 Check angles 12:48:25 SkyScan query 12:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.965<-14531 Statuses=0008 0009 12:48:26 Msec=3750 True Az=112.995 Ze=-37.965 Az status=0008 Ze status=0009 12:48:26 Check angles 12:48:26 SkyScan query 12:48:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.01<-13134 Statuses=0008 0009 12:48:27 Msec=4500 True Az=112.995 Ze=-17.01 Az status=0008 Ze status=0009 12:48:27 Check angles 12:48:27 SkyScan query 12:48:27 SkyScan query done: ret=0 az=112.995<-7533 ze=3.945<-11737 Statuses=0008 0009 12:48:27 Msec=5250 True Az=112.995 Ze=3.945 Az status=0008 Ze status=0009 12:48:28 Check angles 12:48:28 SkyScan query 12:48:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:48:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:48:28 Message to Master queued w/err=0: serial=88381 error=0 12:48:33 Received message from Master: op=Filter serial=88382 12:48:33 Color wheel filter change from 0 to 0 12:48:33 FLIGetFilterPos err=0 currentPosition=0 12:48:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:33 Filter is already there-color wheel unchanged 12:48:33 Received message from Master: op=Shutter serial=88383 12:48:33 Shutter LASER close 12:48:34 Received message from Camera: op=State serial=88385 12:48:34 GetSingleValue result=40 Value=cccccccc 12:48:34 SkyScan query 12:48:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:48:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:34 Parameters OK 12:48:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:34 Set A/D data flow result=40 12:48:34 Set A/D channel type result=40 12:48:34 Set A/D encoding result=40 12:48:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:34 Set channel filter=0.000000e+000 result=40 12:48:34 Config A/D Result=40 12:48:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:34 Get A/D filter: -9.255963e+061 result=40 12:48:34 Get A/D value=-858993460 result=40 12:48:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:34 Parameters OK 12:48:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:34 Set A/D data flow result=40 12:48:34 Set A/D channel type result=40 12:48:34 Set A/D encoding result=40 12:48:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:34 Set channel filter=0.000000e+000 result=40 12:48:34 Config A/D Result=40 12:48:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:34 Get A/D filter: -9.255963e+061 result=40 12:48:34 Get A/D value=-858993460 result=40 12:48:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:34 Aux= 12:48:34 Message to Camera, serial 88385 queued 12:49:11 Received message from Master: op=PointingHead serial=88398 12:49:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:49:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:49:11 Point started: ret=0 12:49:11 point_skyscan result=0 12:49:12 Check angles 12:49:12 SkyScan query 12:49:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:49:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:49:13 Message to Master queued w/err=0: serial=88398 error=0 12:49:18 Received message from Master: op=Filter serial=88399 12:49:18 Color wheel filter change from 0 to 0 12:49:18 FLIGetFilterPos err=0 currentPosition=0 12:49:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:18 Filter is already there-color wheel unchanged 12:49:18 Received message from Master: op=Shutter serial=88400 12:49:18 Shutter LASER close 12:49:18 Received message from Camera: op=State serial=88402 12:49:18 GetSingleValue result=40 Value=cccccccc 12:49:18 SkyScan query 12:49:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:49:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:18 Parameters OK 12:49:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:18 Set A/D data flow result=40 12:49:18 Set A/D channel type result=40 12:49:18 Set A/D encoding result=40 12:49:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:18 Set channel filter=0.000000e+000 result=40 12:49:18 Config A/D Result=40 12:49:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:18 Get A/D filter: -9.255963e+061 result=40 12:49:18 Get A/D value=-858993460 result=40 12:49:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:18 Parameters OK 12:49:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:18 Set A/D data flow result=40 12:49:18 Set A/D channel type result=40 12:49:18 Set A/D encoding result=40 12:49:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:18 Set channel filter=0.000000e+000 result=40 12:49:18 Config A/D Result=40 12:49:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:18 Get A/D filter: -9.255963e+061 result=40 12:49:18 Get A/D value=-858993460 result=40 12:49:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:18 Aux= 12:49:18 Message to Camera, serial 88402 queued 12:49:55 Received message from Master: op=PointingHead serial=88415 12:49:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:49:55 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:49:56 Point started: ret=0 12:49:56 point_skyscan result=0 12:49:56 Check angles 12:49:56 SkyScan query 12:49:57 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 12:49:57 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 12:49:57 Check angles 12:49:57 SkyScan query 12:49:58 SkyScan query done: ret=0 az=153.645<-10243 ze=-6.495<-12433 Statuses=0009 0008 12:49:58 Msec=750 True Az=153.645 Ze=-6.495 Az status=0009 Ze status=0008 12:49:58 Check angles 12:49:58 SkyScan query 12:49:58 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 12:49:58 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 12:49:59 Check angles 12:49:59 SkyScan query 12:49:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:49:59 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:49:59 Message to Master queued w/err=0: serial=88415 error=0 12:50:04 Received message from Master: op=Filter serial=88416 12:50:04 Color wheel filter change from 0 to 0 12:50:04 FLIGetFilterPos err=0 currentPosition=0 12:50:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:04 Filter is already there-color wheel unchanged 12:50:04 Received message from Master: op=Shutter serial=88417 12:50:04 Shutter LASER close 12:50:04 Received message from Camera: op=State serial=88419 12:50:04 GetSingleValue result=40 Value=cccccccc 12:50:04 SkyScan query 12:50:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:50:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:05 Parameters OK 12:50:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:05 Set A/D data flow result=40 12:50:05 Set A/D channel type result=40 12:50:05 Set A/D encoding result=40 12:50:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:05 Set channel filter=0.000000e+000 result=40 12:50:05 Config A/D Result=40 12:50:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:05 Get A/D filter: -9.255963e+061 result=40 12:50:05 Get A/D value=-858993460 result=40 12:50:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:05 Parameters OK 12:50:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:05 Set A/D data flow result=40 12:50:05 Set A/D channel type result=40 12:50:05 Set A/D encoding result=40 12:50:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:05 Set channel filter=0.000000e+000 result=40 12:50:05 Config A/D Result=40 12:50:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:05 Get A/D filter: -9.255963e+061 result=40 12:50:05 Get A/D value=-858993460 result=40 12:50:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:05 Aux= 12:50:05 Message to Camera, serial 88419 queued 12:50:42 Received message from Master: op=PointingHead serial=88432 12:50:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:50:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:50:42 Point started: ret=0 12:50:42 point_skyscan result=0 12:50:43 Check angles 12:50:43 SkyScan query 12:50:43 SkyScan query done: ret=0 az=152.505<-10167 ze=6.51<-11566 Statuses=0009 0008 12:50:43 Msec=0 True Az=152.505 Ze=6.51 Az status=0009 Ze status=0008 12:50:44 Check angles 12:50:44 SkyScan query 12:50:44 SkyScan query done: ret=0 az=135.03<-9002 ze=6.495<-11567 Statuses=0009 0008 12:50:44 Msec=750 True Az=135.03 Ze=6.495 Az status=0009 Ze status=0008 12:50:44 Check angles 12:50:44 SkyScan query 12:50:45 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 12:50:45 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 12:50:45 Check angles 12:50:45 SkyScan query 12:50:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:50:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:50:46 Message to Master queued w/err=0: serial=88432 error=0 12:50:51 Received message from Master: op=Filter serial=88433 12:50:51 Color wheel filter change from 0 to 0 12:50:51 FLIGetFilterPos err=0 currentPosition=0 12:50:51 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:51 Filter is already there-color wheel unchanged 12:50:51 Received message from Master: op=Shutter serial=88434 12:50:51 Shutter LASER close 12:50:51 Received message from Camera: op=State serial=88436 12:50:51 GetSingleValue result=40 Value=cccccccc 12:50:51 SkyScan query 12:50:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:50:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:52 Parameters OK 12:50:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:52 Set A/D data flow result=40 12:50:52 Set A/D channel type result=40 12:50:52 Set A/D encoding result=40 12:50:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:52 Set channel filter=0.000000e+000 result=40 12:50:52 Config A/D Result=40 12:50:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:52 Get A/D filter: -9.255963e+061 result=40 12:50:52 Get A/D value=-858993460 result=40 12:50:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:52 Parameters OK 12:50:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:52 Set A/D data flow result=40 12:50:52 Set A/D channel type result=40 12:50:52 Set A/D encoding result=40 12:50:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:52 Set channel filter=0.000000e+000 result=40 12:50:52 Config A/D Result=40 12:50:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:52 Get A/D filter: -9.255963e+061 result=40 12:50:52 Get A/D value=-858993460 result=40 12:50:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:52 Aux= 12:50:52 Message to Camera, serial 88436 queued 12:51:28 Received message from Master: op=PointingHead serial=88449 12:51:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:51:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:51:29 Point started: ret=0 12:51:29 point_skyscan result=0 12:51:29 Check angles 12:51:29 SkyScan query 12:51:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 12:51:30 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 12:51:30 Check angles 12:51:30 SkyScan query 12:51:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 12:51:31 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 12:51:31 Check angles 12:51:31 SkyScan query 12:51:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 12:51:32 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 12:51:32 Check angles 12:51:32 SkyScan query 12:51:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.76<-17784 Statuses=0008 0009 12:51:32 Msec=2250 True Az=112.995 Ze=-86.76 Az status=0008 Ze status=0009 12:51:32 Check angles 12:51:32 SkyScan query 12:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.73<-19182 Statuses=0008 0009 12:51:33 Msec=3000 True Az=112.995 Ze=-107.73 Az status=0008 Ze status=0009 12:51:33 Check angles 12:51:33 SkyScan query 12:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 12:51:34 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 12:51:34 Check angles 12:51:34 SkyScan query 12:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 12:51:35 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 12:51:35 Check angles 12:51:35 SkyScan query 12:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 12:51:35 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 12:51:35 Check angles 12:51:35 SkyScan query 12:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:51:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:51:36 Message to Master queued w/err=0: serial=88449 error=0 12:51:41 Received message from Master: op=Filter serial=88450 12:51:41 Color wheel filter change from 0 to 0 12:51:41 FLIGetFilterPos err=0 currentPosition=0 12:51:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:41 Filter is already there-color wheel unchanged 12:51:41 Received message from Master: op=Shutter serial=88451 12:51:41 Shutter LASER open 12:51:41 Received message from Camera: op=State serial=88453 12:51:41 GetSingleValue result=40 Value=cccccccc 12:51:41 SkyScan query 12:51:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:51:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:42 Parameters OK 12:51:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:42 Set A/D data flow result=40 12:51:42 Set A/D channel type result=40 12:51:42 Set A/D encoding result=40 12:51:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:42 Set channel filter=0.000000e+000 result=40 12:51:42 Config A/D Result=40 12:51:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:42 Get A/D filter: -9.255963e+061 result=40 12:51:42 Get A/D value=-858993460 result=40 12:51:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:42 Parameters OK 12:51:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:42 Set A/D data flow result=40 12:51:42 Set A/D channel type result=40 12:51:42 Set A/D encoding result=40 12:51:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:42 Set channel filter=0.000000e+000 result=40 12:51:42 Config A/D Result=40 12:51:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:42 Get A/D filter: -9.255963e+061 result=40 12:51:42 Get A/D value=-858993460 result=40 12:51:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:42 Aux= 12:51:42 Message to Camera, serial 88453 queued 12:51:50 Received message from Master: op=Shutter serial=88463 12:51:50 Shutter LASER close 12:51:51 Received message from Master: op=PointingHead serial=88467 12:51:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:51:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:51:51 Point started: ret=0 12:51:51 point_skyscan result=0 12:51:52 Check angles 12:51:52 SkyScan query 12:51:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 12:51:53 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 12:51:53 Check angles 12:51:53 SkyScan query 12:51:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 12:51:53 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 12:51:54 Check angles 12:51:54 SkyScan query 12:51:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 12:51:54 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 12:51:54 Check angles 12:51:54 SkyScan query 12:51:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 12:51:55 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 12:51:55 Check angles 12:51:55 SkyScan query 12:51:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 12:51:56 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 12:51:56 Check angles 12:51:56 SkyScan query 12:51:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 12:51:56 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 12:51:57 Check angles 12:51:57 SkyScan query 12:51:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 12:51:57 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 12:51:57 Check angles 12:51:57 SkyScan query 12:51:58 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 12:51:58 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 12:51:58 Check angles 12:51:58 SkyScan query 12:51:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:51:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:51:59 Message to Master queued w/err=0: serial=88467 error=0 12:52:04 Received message from Master: op=Filter serial=88468 12:52:04 Color wheel filter change from 0 to 0 12:52:04 FLIGetFilterPos err=0 currentPosition=0 12:52:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:04 Filter is already there-color wheel unchanged 12:52:04 Received message from Master: op=Shutter serial=88469 12:52:04 Shutter LASER close 12:52:04 Received message from Camera: op=State serial=88471 12:52:04 GetSingleValue result=40 Value=cccccccc 12:52:04 SkyScan query 12:52:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:52:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:05 Parameters OK 12:52:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:05 Set A/D data flow result=40 12:52:05 Set A/D channel type result=40 12:52:05 Set A/D encoding result=40 12:52:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:05 Set channel filter=0.000000e+000 result=40 12:52:05 Config A/D Result=40 12:52:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:05 Get A/D filter: -9.255963e+061 result=40 12:52:05 Get A/D value=-858993460 result=40 12:52:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:05 Parameters OK 12:52:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:05 Set A/D data flow result=40 12:52:05 Set A/D channel type result=40 12:52:05 Set A/D encoding result=40 12:52:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:05 Set channel filter=0.000000e+000 result=40 12:52:05 Config A/D Result=40 12:52:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:05 Get A/D filter: -9.255963e+061 result=40 12:52:05 Get A/D value=-858993460 result=40 12:52:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:05 Aux= 12:52:05 Message to Camera, serial 88471 queued 12:52:41 Received message from Master: op=PointingHead serial=88484 12:52:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:52:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:52:42 Point started: ret=0 12:52:42 point_skyscan result=0 12:52:43 Check angles 12:52:43 SkyScan query 12:52:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:52:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:52:43 Message to Master queued w/err=0: serial=88484 error=0 12:52:48 Received message from Master: op=Filter serial=88485 12:52:48 Color wheel filter change from 0 to 0 12:52:48 FLIGetFilterPos err=0 currentPosition=0 12:52:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:48 Filter is already there-color wheel unchanged 12:52:48 Received message from Master: op=Shutter serial=88486 12:52:48 Shutter LASER close 12:52:48 Received message from Camera: op=State serial=88488 12:52:48 GetSingleValue result=40 Value=cccccccc 12:52:48 SkyScan query 12:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:52:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:49 Parameters OK 12:52:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:49 Set A/D data flow result=40 12:52:49 Set A/D channel type result=40 12:52:49 Set A/D encoding result=40 12:52:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:49 Set channel filter=0.000000e+000 result=40 12:52:49 Config A/D Result=40 12:52:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:49 Get A/D filter: -9.255963e+061 result=40 12:52:49 Get A/D value=-858993460 result=40 12:52:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:49 Parameters OK 12:52:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:49 Set A/D data flow result=40 12:52:49 Set A/D channel type result=40 12:52:49 Set A/D encoding result=40 12:52:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:49 Set channel filter=0.000000e+000 result=40 12:52:49 Config A/D Result=40 12:52:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:49 Get A/D filter: -9.255963e+061 result=40 12:52:49 Get A/D value=-858993460 result=40 12:52:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:49 Aux= 12:52:49 Message to Camera, serial 88488 queued 12:53:26 Received message from Master: op=PointingHead serial=88501 12:53:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:53:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:53:26 Point started: ret=0 12:53:26 point_skyscan result=0 12:53:27 Check angles 12:53:27 SkyScan query 12:53:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:53:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:53:27 Message to Master queued w/err=0: serial=88501 error=0 12:53:32 Received message from Master: op=Filter serial=88502 12:53:32 Color wheel filter change from 0 to 0 12:53:32 FLIGetFilterPos err=0 currentPosition=0 12:53:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:32 Filter is already there-color wheel unchanged 12:53:33 Received message from Master: op=Shutter serial=88503 12:53:33 Shutter LASER close 12:53:33 Received message from Camera: op=State serial=88505 12:53:33 GetSingleValue result=40 Value=cccccccc 12:53:33 SkyScan query 12:53:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:53:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:33 Parameters OK 12:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:33 Set A/D data flow result=40 12:53:33 Set A/D channel type result=40 12:53:33 Set A/D encoding result=40 12:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:33 Set channel filter=0.000000e+000 result=40 12:53:33 Config A/D Result=40 12:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:33 Get A/D filter: -9.255963e+061 result=40 12:53:33 Get A/D value=-858993460 result=40 12:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:33 Parameters OK 12:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:33 Set A/D data flow result=40 12:53:33 Set A/D channel type result=40 12:53:33 Set A/D encoding result=40 12:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:33 Set channel filter=0.000000e+000 result=40 12:53:33 Config A/D Result=40 12:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:33 Get A/D filter: -9.255963e+061 result=40 12:53:33 Get A/D value=-858993460 result=40 12:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:33 Aux= 12:53:33 Message to Camera, serial 88505 queued 12:54:10 Received message from Master: op=PointingHead serial=88518 12:54:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:54:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:54:10 Point started: ret=0 12:54:10 point_skyscan result=0 12:54:11 Check angles 12:54:11 SkyScan query 12:54:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:54:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:54:12 Message to Master queued w/err=0: serial=88518 error=0 12:54:17 Received message from Master: op=Filter serial=88519 12:54:17 Color wheel filter change from 0 to 0 12:54:17 FLIGetFilterPos err=0 currentPosition=0 12:54:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:17 Filter is already there-color wheel unchanged 12:54:17 Received message from Master: op=Shutter serial=88520 12:54:17 Shutter LASER close 12:54:17 Received message from Camera: op=State serial=88522 12:54:17 GetSingleValue result=40 Value=cccccccc 12:54:17 SkyScan query 12:54:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:54:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 [UTC 2019-3-3 12:54:17] 12:54:17 Parameters OK 12:54:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:18 Set A/D data flow result=40 12:54:18 Set A/D channel type result=40 12:54:18 Set A/D encoding result=40 12:54:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:18 Set channel filter=0.000000e+000 result=40 12:54:18 Config A/D Result=40 12:54:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:18 Get A/D filter: -9.255963e+061 result=40 12:54:18 Get A/D value=-858993460 result=40 12:54:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:18 Parameters OK 12:54:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:18 Set A/D data flow result=40 12:54:18 Set A/D channel type result=40 12:54:18 Set A/D encoding result=40 12:54:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:18 Set channel filter=0.000000e+000 result=40 12:54:18 Config A/D Result=40 12:54:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:18 Get A/D filter: -9.255963e+061 result=40 12:54:18 Get A/D value=-858993460 result=40 12:54:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:18 Aux= 12:54:18 Message to Camera, serial 88522 queued 12:54:54 Received message from Master: op=PointingHead serial=88535 12:54:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:54:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:54:55 Point started: ret=0 12:54:55 point_skyscan result=0 12:54:55 Check angles 12:54:55 SkyScan query 12:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 12:54:56 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 12:54:56 Check angles 12:54:56 SkyScan query 12:54:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 12:54:57 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 12:54:57 Check angles 12:54:57 SkyScan query 12:54:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.235<-16349 Statuses=0008 0009 12:54:57 Msec=1500 True Az=112.995 Ze=-65.235 Az status=0008 Ze status=0009 12:54:58 Check angles 12:54:58 SkyScan query 12:54:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 12:54:58 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 12:54:58 Check angles 12:54:58 SkyScan query 12:54:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.58<-19172 Statuses=0008 0009 12:54:59 Msec=3000 True Az=112.995 Ze=-107.58 Az status=0008 Ze status=0009 12:54:59 Check angles 12:54:59 SkyScan query 12:55:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.505<-20567 Statuses=0008 0009 12:55:00 Msec=3750 True Az=112.995 Ze=-128.505 Az status=0008 Ze status=0009 12:55:00 Check angles 12:55:00 SkyScan query 12:55:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.91<-21994 Statuses=0008 0009 12:55:01 Msec=4500 True Az=112.995 Ze=-149.91 Az status=0008 Ze status=0009 12:55:01 Check angles 12:55:01 SkyScan query 12:55:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 12:55:01 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 12:55:01 Check angles 12:55:01 SkyScan query 12:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:55:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:55:02 Message to Master queued w/err=0: serial=88535 error=0 12:55:07 Received message from Master: op=Filter serial=88536 12:55:07 Color wheel filter change from 0 to 0 12:55:07 FLIGetFilterPos err=0 currentPosition=0 12:55:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:07 Filter is already there-color wheel unchanged 12:55:07 Received message from Master: op=Shutter serial=88537 12:55:07 Shutter LASER open 12:55:07 Received message from Camera: op=State serial=88539 12:55:07 GetSingleValue result=40 Value=cccccccc 12:55:07 SkyScan query 12:55:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:55:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:08 Parameters OK 12:55:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:08 Set A/D data flow result=40 12:55:08 Set A/D channel type result=40 12:55:08 Set A/D encoding result=40 12:55:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:08 Set channel filter=0.000000e+000 result=40 12:55:08 Config A/D Result=40 12:55:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:08 Get A/D filter: -9.255963e+061 result=40 12:55:08 Get A/D value=-858993460 result=40 12:55:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:08 Parameters OK 12:55:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:08 Set A/D data flow result=40 12:55:08 Set A/D channel type result=40 12:55:08 Set A/D encoding result=40 12:55:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:08 Set channel filter=0.000000e+000 result=40 12:55:08 Config A/D Result=40 12:55:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:08 Get A/D filter: -9.255963e+061 result=40 12:55:08 Get A/D value=-858993460 result=40 12:55:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:08 Aux= 12:55:08 Message to Camera, serial 88539 queued 12:55:16 Received message from Master: op=Shutter serial=88549 12:55:16 Shutter LASER close 12:55:17 Received message from Master: op=PointingHead serial=88553 12:55:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:55:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:55:17 Point started: ret=0 12:55:17 point_skyscan result=0 12:55:18 Check angles 12:55:18 SkyScan query 12:55:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 12:55:19 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 12:55:19 Check angles 12:55:19 SkyScan query 12:55:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.65<-20110 Statuses=0008 0009 12:55:19 Msec=750 True Az=112.995 Ze=-121.65 Az status=0008 Ze status=0009 12:55:20 Check angles 12:55:20 SkyScan query 12:55:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 12:55:20 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 12:55:20 Check angles 12:55:20 SkyScan query 12:55:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.77<-17318 Statuses=0008 0009 12:55:21 Msec=2250 True Az=112.995 Ze=-79.77 Az status=0008 Ze status=0009 12:55:21 Check angles 12:55:21 SkyScan query 12:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 12:55:22 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 12:55:22 Check angles 12:55:22 SkyScan query 12:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 12:55:22 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 12:55:23 Check angles 12:55:23 SkyScan query 12:55:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 12:55:23 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 12:55:23 Check angles 12:55:23 SkyScan query 12:55:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 12:55:24 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 12:55:24 Check angles 12:55:24 SkyScan query 12:55:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:55:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:55:25 Message to Master queued w/err=0: serial=88553 error=0 12:55:30 Received message from Master: op=Filter serial=88554 12:55:30 Color wheel filter change from 0 to 0 12:55:30 FLIGetFilterPos err=0 currentPosition=0 12:55:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:30 Filter is already there-color wheel unchanged 12:55:30 Received message from Master: op=Shutter serial=88555 12:55:30 Shutter LASER close 12:55:30 Received message from Camera: op=State serial=88557 12:55:30 GetSingleValue result=40 Value=cccccccc 12:55:30 SkyScan query 12:55:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:55:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:31 Parameters OK 12:55:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:31 Set A/D data flow result=40 12:55:31 Set A/D channel type result=40 12:55:31 Set A/D encoding result=40 12:55:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:31 Set channel filter=0.000000e+000 result=40 12:55:31 Config A/D Result=40 12:55:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:31 Get A/D filter: -9.255963e+061 result=40 12:55:31 Get A/D value=-858993460 result=40 12:55:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:31 Parameters OK 12:55:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:31 Set A/D data flow result=40 12:55:31 Set A/D channel type result=40 12:55:31 Set A/D encoding result=40 12:55:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:31 Set channel filter=0.000000e+000 result=40 12:55:31 Config A/D Result=40 12:55:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:31 Get A/D filter: -9.255963e+061 result=40 12:55:31 Get A/D value=-858993460 result=40 12:55:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:31 Aux= 12:55:31 Message to Camera, serial 88557 queued 12:56:07 Received message from Master: op=PointingHead serial=88570 12:56:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:56:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:56:08 Point started: ret=0 12:56:08 point_skyscan result=0 12:56:08 Check angles 12:56:08 SkyScan query 12:56:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:56:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:56:09 Message to Master queued w/err=0: serial=88570 error=0 12:56:14 Received message from Master: op=Filter serial=88571 12:56:14 Color wheel filter change from 0 to 0 12:56:14 FLIGetFilterPos err=0 currentPosition=0 12:56:14 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:14 Filter is already there-color wheel unchanged 12:56:14 Received message from Master: op=Shutter serial=88572 12:56:14 Shutter LASER close 12:56:14 Received message from Camera: op=State serial=88574 12:56:14 GetSingleValue result=40 Value=cccccccc 12:56:14 SkyScan query 12:56:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:56:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:15 Parameters OK 12:56:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:15 Set A/D data flow result=40 12:56:15 Set A/D channel type result=40 12:56:15 Set A/D encoding result=40 12:56:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:15 Set channel filter=0.000000e+000 result=40 12:56:15 Config A/D Result=40 12:56:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:15 Get A/D filter: -9.255963e+061 result=40 12:56:15 Get A/D value=-858993460 result=40 12:56:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:15 Parameters OK 12:56:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:15 Set A/D data flow result=40 12:56:15 Set A/D channel type result=40 12:56:15 Set A/D encoding result=40 12:56:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:15 Set channel filter=0.000000e+000 result=40 12:56:15 Config A/D Result=40 12:56:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:15 Get A/D filter: -9.255963e+061 result=40 12:56:15 Get A/D value=-858993460 result=40 12:56:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:15 Aux= 12:56:15 Message to Camera, serial 88574 queued 12:56:51 Received message from Master: op=PointingHead serial=88586 12:56:51 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:56:51 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:56:51 Point started: ret=0 12:56:51 point_skyscan result=0 12:56:52 Check angles 12:56:52 SkyScan query 12:56:52 SkyScan query done: ret=0 az=135.855<-9057 ze=-6.51<-12434 Statuses=0009 0008 12:56:52 Msec=0 True Az=135.855 Ze=-6.51 Az status=0009 Ze status=0008 12:56:53 Check angles 12:56:53 SkyScan query 12:56:53 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.495<-12433 Statuses=0009 0008 12:56:53 Msec=750 True Az=153.345 Ze=-6.495 Az status=0009 Ze status=0008 12:56:53 Check angles 12:56:53 SkyScan query 12:56:54 SkyScan query done: ret=0 az=170.82<-11388 ze=-6.495<-12433 Statuses=0009 0008 12:56:54 Msec=1500 True Az=170.82 Ze=-6.495 Az status=0009 Ze status=0008 12:56:54 Check angles 12:56:54 SkyScan query 12:56:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:56:55 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:56:55 Message to Master queued w/err=0: serial=88586 error=0 12:57:00 Received message from Master: op=Filter serial=88587 12:57:00 Color wheel filter change from 0 to 0 12:57:00 FLIGetFilterPos err=0 currentPosition=0 12:57:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:00 Filter is already there-color wheel unchanged 12:57:00 Received message from Master: op=Shutter serial=88588 12:57:00 Shutter LASER close 12:57:00 Received message from Camera: op=State serial=88590 12:57:00 GetSingleValue result=40 Value=cccccccc 12:57:00 SkyScan query 12:57:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:57:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:00 Parameters OK 12:57:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:00 Set A/D data flow result=40 12:57:00 Set A/D channel type result=40 12:57:00 Set A/D encoding result=40 12:57:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:00 Set channel filter=0.000000e+000 result=40 12:57:00 Config A/D Result=40 12:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:00 Get A/D filter: -9.255963e+061 result=40 12:57:00 Get A/D value=-858993460 result=40 12:57:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:00 Parameters OK 12:57:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:00 Set A/D data flow result=40 12:57:00 Set A/D channel type result=40 12:57:00 Set A/D encoding result=40 12:57:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:00 Set channel filter=0.000000e+000 result=40 12:57:00 Config A/D Result=40 12:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:00 Get A/D filter: -9.255963e+061 result=40 12:57:00 Get A/D value=-858993460 result=40 12:57:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:00 Aux= 12:57:00 Message to Camera, serial 88590 queued 12:57:37 Received message from Master: op=PointingHead serial=88603 12:57:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:57:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:57:38 Point started: ret=0 12:57:38 point_skyscan result=0 12:57:38 Check angles 12:57:38 SkyScan query 12:57:39 SkyScan query done: ret=0 az=152.715<-10181 ze=6.51<-11566 Statuses=0009 0008 12:57:39 Msec=0 True Az=152.715 Ze=6.51 Az status=0009 Ze status=0008 12:57:39 Check angles 12:57:39 SkyScan query 12:57:40 SkyScan query done: ret=0 az=134.955<-8997 ze=6.495<-11567 Statuses=0009 0008 12:57:40 Msec=750 True Az=134.955 Ze=6.495 Az status=0009 Ze status=0008 12:57:40 Check angles 12:57:40 SkyScan query 12:57:40 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 12:57:40 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 12:57:41 Check angles 12:57:41 SkyScan query 12:57:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:57:41 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:57:41 Message to Master queued w/err=0: serial=88603 error=0 12:57:46 Received message from Master: op=Filter serial=88604 12:57:46 Color wheel filter change from 0 to 0 12:57:46 FLIGetFilterPos err=0 currentPosition=0 12:57:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:46 Filter is already there-color wheel unchanged 12:57:46 Received message from Master: op=Shutter serial=88605 12:57:46 Shutter LASER close 12:57:46 Received message from Camera: op=State serial=88607 12:57:46 GetSingleValue result=40 Value=cccccccc 12:57:46 SkyScan query 12:57:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:57:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:47 Parameters OK 12:57:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:47 Set A/D data flow result=40 12:57:47 Set A/D channel type result=40 12:57:47 Set A/D encoding result=40 12:57:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:47 Set channel filter=0.000000e+000 result=40 12:57:47 Config A/D Result=40 12:57:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:47 Get A/D filter: -9.255963e+061 result=40 12:57:47 Get A/D value=-858993460 result=40 12:57:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:47 Parameters OK 12:57:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:47 Set A/D data flow result=40 12:57:47 Set A/D channel type result=40 12:57:47 Set A/D encoding result=40 12:57:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:47 Set channel filter=0.000000e+000 result=40 12:57:47 Config A/D Result=40 12:57:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:47 Get A/D filter: -9.255963e+061 result=40 12:57:47 Get A/D value=-858993460 result=40 12:57:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:47 Aux= 12:57:47 Message to Camera, serial 88607 queued 12:58:24 Received message from Master: op=PointingHead serial=88620 12:58:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:58:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:58:24 Point started: ret=0 12:58:24 point_skyscan result=0 12:58:25 Check angles 12:58:25 SkyScan query 12:58:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 12:58:26 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 12:58:26 Check angles 12:58:26 SkyScan query 12:58:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.835<-14989 Statuses=0008 0009 12:58:26 Msec=750 True Az=112.995 Ze=-44.835 Az status=0008 Ze status=0009 12:58:26 Check angles 12:58:26 SkyScan query 12:58:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.775<-16385 Statuses=0008 0009 12:58:27 Msec=1500 True Az=112.995 Ze=-65.775 Az status=0008 Ze status=0009 12:58:27 Check angles 12:58:27 SkyScan query 12:58:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 12:58:28 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 12:58:28 Check angles 12:58:28 SkyScan query 12:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 12:58:29 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 12:58:29 Check angles 12:58:29 SkyScan query 12:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.06<-20604 Statuses=0008 0009 12:58:29 Msec=3750 True Az=112.995 Ze=-129.06 Az status=0008 Ze status=0009 12:58:29 Check angles 12:58:29 SkyScan query 12:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.015<-22001 Statuses=0008 0009 12:58:30 Msec=4500 True Az=112.995 Ze=-150.015 Az status=0008 Ze status=0009 12:58:30 Check angles 12:58:30 SkyScan query 12:58:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.88<-23392 Statuses=0008 0009 12:58:31 Msec=5250 True Az=112.995 Ze=-170.88 Az status=0008 Ze status=0009 12:58:31 Check angles 12:58:31 SkyScan query 12:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:58:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:58:32 Message to Master queued w/err=0: serial=88620 error=0 12:58:37 Received message from Master: op=Filter serial=88621 12:58:37 Color wheel filter change from 0 to 0 12:58:37 FLIGetFilterPos err=0 currentPosition=0 12:58:37 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:37 Filter is already there-color wheel unchanged 12:58:37 Received message from Master: op=Shutter serial=88622 12:58:37 Shutter LASER open 12:58:37 Received message from Camera: op=State serial=88624 12:58:37 GetSingleValue result=40 Value=cccccccc 12:58:37 SkyScan query 12:58:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:58:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:37 Parameters OK 12:58:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:37 Set A/D data flow result=40 12:58:37 Set A/D channel type result=40 12:58:37 Set A/D encoding result=40 12:58:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:37 Set channel filter=0.000000e+000 result=40 12:58:37 Config A/D Result=40 12:58:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:37 Get A/D filter: -9.255963e+061 result=40 12:58:37 Get A/D value=-858993460 result=40 12:58:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:37 Parameters OK 12:58:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:37 Set A/D data flow result=40 12:58:37 Set A/D channel type result=40 12:58:37 Set A/D encoding result=40 12:58:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:37 Set channel filter=0.000000e+000 result=40 12:58:37 Config A/D Result=40 12:58:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:37 Get A/D filter: -9.255963e+061 result=40 12:58:37 Get A/D value=-858993460 result=40 12:58:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:37 Aux= 12:58:37 Message to Camera, serial 88624 queued 12:58:46 Received message from Master: op=Shutter serial=88634 12:58:46 Shutter LASER close 12:58:46 Received message from Master: op=PointingHead serial=88638 12:58:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:58:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:58:47 Point started: ret=0 12:58:47 point_skyscan result=0 12:58:47 Check angles 12:58:47 SkyScan query 12:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 12:58:48 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 12:58:48 Check angles 12:58:48 SkyScan query 12:58:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 12:58:49 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 12:58:49 Check angles 12:58:49 SkyScan query 12:58:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 12:58:50 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 12:58:50 Check angles 12:58:50 SkyScan query 12:58:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 12:58:50 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 12:58:50 Check angles 12:58:50 SkyScan query 12:58:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 12:58:51 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 12:58:51 Check angles 12:58:51 SkyScan query 12:58:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 12:58:52 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 12:58:52 Check angles 12:58:52 SkyScan query 12:58:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.77<-13118 Statuses=0008 0009 12:58:53 Msec=4500 True Az=112.995 Ze=-16.77 Az status=0008 Ze status=0009 12:58:53 Check angles 12:58:53 SkyScan query 12:58:53 SkyScan query done: ret=0 az=112.995<-7533 ze=4.155<-11723 Statuses=0008 0009 12:58:53 Msec=5250 True Az=112.995 Ze=4.155 Az status=0008 Ze status=0009 12:58:53 Check angles 12:58:53 SkyScan query 12:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:58:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:58:54 Message to Master queued w/err=0: serial=88638 error=0 12:58:59 Received message from Master: op=Filter serial=88639 12:58:59 Color wheel filter change from 0 to 0 12:58:59 FLIGetFilterPos err=0 currentPosition=0 12:58:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:59 Filter is already there-color wheel unchanged 12:58:59 Received message from Master: op=Shutter serial=88640 12:58:59 Shutter LASER close 12:58:59 Received message from Camera: op=State serial=88642 12:58:59 GetSingleValue result=40 Value=cccccccc 12:58:59 SkyScan query 12:59:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:59:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:00 Parameters OK 12:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:00 Set A/D data flow result=40 12:59:00 Set A/D channel type result=40 12:59:00 Set A/D encoding result=40 12:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:00 Set channel filter=0.000000e+000 result=40 12:59:00 Config A/D Result=40 12:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:00 Get A/D filter: -9.255963e+061 result=40 12:59:00 Get A/D value=-858993460 result=40 12:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:00 Parameters OK 12:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:00 Set A/D data flow result=40 12:59:00 Set A/D channel type result=40 12:59:00 Set A/D encoding result=40 12:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:00 Set channel filter=0.000000e+000 result=40 12:59:00 Config A/D Result=40 12:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:00 Get A/D filter: -9.255963e+061 result=40 12:59:00 Get A/D value=-858993460 result=40 12:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:00 Aux= 12:59:00 Message to Camera, serial 88642 queued 12:59:37 Received message from Master: op=PointingHead serial=88655 12:59:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:59:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:59:37 Point started: ret=0 12:59:37 point_skyscan result=0 12:59:38 Check angles 12:59:38 SkyScan query 12:59:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:59:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:59:38 Message to Master queued w/err=0: serial=88655 error=0 12:59:43 Received message from Master: op=Filter serial=88656 12:59:43 Color wheel filter change from 0 to 0 12:59:43 FLIGetFilterPos err=0 currentPosition=0 12:59:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:43 Filter is already there-color wheel unchanged 12:59:44 Received message from Master: op=Shutter serial=88657 12:59:44 Shutter LASER close 12:59:44 Received message from Camera: op=State serial=88659 12:59:44 GetSingleValue result=40 Value=cccccccc 12:59:44 SkyScan query 12:59:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:59:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:44 Parameters OK 12:59:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:44 Set A/D data flow result=40 12:59:44 Set A/D channel type result=40 12:59:44 Set A/D encoding result=40 12:59:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:44 Set channel filter=0.000000e+000 result=40 12:59:44 Config A/D Result=40 12:59:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:44 Get A/D filter: -9.255963e+061 result=40 12:59:44 Get A/D value=-858993460 result=40 12:59:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:44 Parameters OK 12:59:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:44 Set A/D data flow result=40 12:59:44 Set A/D channel type result=40 12:59:44 Set A/D encoding result=40 12:59:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:44 Set channel filter=0.000000e+000 result=40 12:59:44 Config A/D Result=40 12:59:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:44 Get A/D filter: -9.255963e+061 result=40 12:59:44 Get A/D value=-858993460 result=40 12:59:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:44 Aux= 12:59:44 Message to Camera, serial 88659 queued 13:00:21 Received message from Master: op=PointingHead serial=88672 13:00:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:00:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:00:21 Point started: ret=0 13:00:21 point_skyscan result=0 13:00:22 Check angles 13:00:22 SkyScan query 13:00:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:00:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:00:23 Message to Master queued w/err=0: serial=88672 error=0 13:00:28 Received message from Master: op=Filter serial=88673 13:00:28 Color wheel filter change from 0 to 0 13:00:28 FLIGetFilterPos err=0 currentPosition=0 13:00:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:28 Filter is already there-color wheel unchanged 13:00:28 Received message from Master: op=Shutter serial=88674 13:00:28 Shutter LASER close 13:00:28 Received message from Camera: op=State serial=88676 13:00:28 GetSingleValue result=40 Value=cccccccc 13:00:28 SkyScan query 13:00:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:00:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:29 Parameters OK 13:00:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:29 Set A/D data flow result=40 13:00:29 Set A/D channel type result=40 13:00:29 Set A/D encoding result=40 13:00:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:29 Set channel filter=0.000000e+000 result=40 13:00:29 Config A/D Result=40 13:00:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:29 Get A/D filter: -9.255963e+061 result=40 13:00:29 Get A/D value=-858993460 result=40 13:00:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:29 Parameters OK 13:00:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:29 Set A/D data flow result=40 13:00:29 Set A/D channel type result=40 13:00:29 Set A/D encoding result=40 13:00:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:29 Set channel filter=0.000000e+000 result=40 13:00:29 Config A/D Result=40 13:00:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:29 Get A/D filter: -9.255963e+061 result=40 13:00:29 Get A/D value=-858993460 result=40 13:00:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:29 Aux= 13:00:29 Message to Camera, serial 88676 queued 13:01:05 Received message from Master: op=PointingHead serial=88689 13:01:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:01:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:01:06 Point started: ret=0 13:01:06 point_skyscan result=0 13:01:06 Check angles 13:01:06 SkyScan query 13:01:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:01:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:01:07 Message to Master queued w/err=0: serial=88689 error=0 13:01:12 Received message from Master: op=Filter serial=88690 13:01:12 Color wheel filter change from 0 to 0 13:01:12 FLIGetFilterPos err=0 currentPosition=0 13:01:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:12 Filter is already there-color wheel unchanged 13:01:12 Received message from Master: op=Shutter serial=88691 13:01:12 Shutter LASER close 13:01:12 Received message from Camera: op=State serial=88693 13:01:12 GetSingleValue result=40 Value=cccccccc 13:01:12 SkyScan query 13:01:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:01:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:13 Parameters OK 13:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:13 Set A/D data flow result=40 13:01:13 Set A/D channel type result=40 13:01:13 Set A/D encoding result=40 13:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:13 Set channel filter=0.000000e+000 result=40 13:01:13 Config A/D Result=40 13:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:13 Get A/D filter: -9.255963e+061 result=40 13:01:13 Get A/D value=-858993460 result=40 13:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:13 Parameters OK 13:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:13 Set A/D data flow result=40 13:01:13 Set A/D channel type result=40 13:01:13 Set A/D encoding result=40 13:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:13 Set channel filter=0.000000e+000 result=40 13:01:13 Config A/D Result=40 13:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:13 Get A/D filter: -9.255963e+061 result=40 13:01:13 Get A/D value=-858993460 result=40 13:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:13 Aux= 13:01:13 Message to Camera, serial 88693 queued 13:01:49 Received message from Master: op=PointingHead serial=88705 13:01:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:01:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:01:49 Point started: ret=0 13:01:49 point_skyscan result=0 13:01:50 Check angles 13:01:50 SkyScan query 13:01:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.58<-13572 Statuses=0008 0009 13:01:50 Msec=0 True Az=112.995 Ze=-23.58 Az status=0008 Ze status=0009 13:01:51 Check angles 13:01:51 SkyScan query 13:01:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 13:01:51 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 13:01:51 Check angles 13:01:51 SkyScan query 13:01:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 13:01:52 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 13:01:52 Check angles 13:01:52 SkyScan query 13:01:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 13:01:53 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 13:01:53 Check angles 13:01:53 SkyScan query 13:01:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 13:01:53 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 13:01:54 Check angles 13:01:54 SkyScan query 13:01:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 13:01:54 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 13:01:54 Check angles 13:01:54 SkyScan query 13:01:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.31<-21954 Statuses=0008 0009 13:01:55 Msec=4500 True Az=112.995 Ze=-149.31 Az status=0008 Ze status=0009 13:01:55 Check angles 13:01:55 SkyScan query 13:01:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 13:01:56 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 13:01:56 Check angles 13:01:56 SkyScan query 13:01:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:01:56 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:01:56 Message to Master queued w/err=0: serial=88705 error=0 13:02:01 Received message from Master: op=Filter serial=88706 13:02:01 Color wheel filter change from 0 to 0 13:02:01 FLIGetFilterPos err=0 currentPosition=0 13:02:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:01 Filter is already there-color wheel unchanged 13:02:02 Received message from Master: op=Shutter serial=88707 13:02:02 Shutter LASER open 13:02:02 Received message from Camera: op=State serial=88709 13:02:02 GetSingleValue result=40 Value=cccccccc 13:02:02 SkyScan query 13:02:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:02:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:02 Parameters OK 13:02:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:02 Set A/D data flow result=40 13:02:02 Set A/D channel type result=40 13:02:02 Set A/D encoding result=40 13:02:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:02 Set channel filter=0.000000e+000 result=40 13:02:02 Config A/D Result=40 13:02:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:02 Get A/D filter: -9.255963e+061 result=40 13:02:02 Get A/D value=-858993460 result=40 13:02:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:02 Parameters OK 13:02:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:02 Set A/D data flow result=40 13:02:02 Set A/D channel type result=40 13:02:02 Set A/D encoding result=40 13:02:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:02 Set channel filter=0.000000e+000 result=40 13:02:02 Config A/D Result=40 13:02:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:02 Get A/D filter: -9.255963e+061 result=40 13:02:02 Get A/D value=-858993460 result=40 13:02:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:02 Aux= 13:02:02 Message to Camera, serial 88709 queued 13:02:11 Received message from Master: op=Shutter serial=88719 13:02:11 Shutter LASER close 13:02:11 Received message from Master: op=PointingHead serial=88723 13:02:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:02:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:02:12 Point started: ret=0 13:02:12 point_skyscan result=0 13:02:13 Check angles 13:02:13 SkyScan query 13:02:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 13:02:13 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 13:02:13 Check angles 13:02:13 SkyScan query 13:02:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 13:02:14 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 13:02:14 Check angles 13:02:14 SkyScan query 13:02:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.475<-18765 Statuses=0008 0009 13:02:15 Msec=1500 True Az=112.995 Ze=-101.475 Az status=0008 Ze status=0009 13:02:15 Check angles 13:02:15 SkyScan query 13:02:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.505<-17367 Statuses=0008 0009 13:02:15 Msec=2250 True Az=112.995 Ze=-80.505 Az status=0008 Ze status=0009 13:02:16 Check angles 13:02:16 SkyScan query 13:02:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.565<-15971 Statuses=0008 0009 13:02:16 Msec=3000 True Az=112.995 Ze=-59.565 Az status=0008 Ze status=0009 13:02:16 Check angles 13:02:16 SkyScan query 13:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.61<-14574 Statuses=0008 0009 13:02:17 Msec=3750 True Az=112.995 Ze=-38.61 Az status=0008 Ze status=0009 13:02:17 Check angles 13:02:17 SkyScan query 13:02:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.22<-13148 Statuses=0008 0009 13:02:18 Msec=4500 True Az=112.995 Ze=-17.22 Az status=0008 Ze status=0009 13:02:18 Check angles 13:02:18 SkyScan query 13:02:18 SkyScan query done: ret=0 az=112.995<-7533 ze=3.735<-11751 Statuses=0008 0009 13:02:18 Msec=5250 True Az=112.995 Ze=3.735 Az status=0008 Ze status=0009 13:02:19 Check angles 13:02:19 SkyScan query 13:02:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:02:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:02:19 Message to Master queued w/err=0: serial=88723 error=0 13:02:24 Received message from Master: op=Filter serial=88724 13:02:24 Color wheel filter change from 0 to 0 13:02:24 FLIGetFilterPos err=0 currentPosition=0 13:02:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:24 Filter is already there-color wheel unchanged 13:02:24 Received message from Master: op=Shutter serial=88725 13:02:24 Shutter LASER close 13:02:24 Received message from Camera: op=State serial=88727 13:02:24 GetSingleValue result=40 Value=cccccccc 13:02:24 SkyScan query 13:02:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:02:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:25 Parameters OK 13:02:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:25 Set A/D data flow result=40 13:02:25 Set A/D channel type result=40 13:02:25 Set A/D encoding result=40 13:02:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:25 Set channel filter=0.000000e+000 result=40 13:02:25 Config A/D Result=40 13:02:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:25 Get A/D filter: -9.255963e+061 result=40 13:02:25 Get A/D value=-858993460 result=40 13:02:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:25 Parameters OK 13:02:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:25 Set A/D data flow result=40 13:02:25 Set A/D channel type result=40 13:02:25 Set A/D encoding result=40 13:02:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:25 Set channel filter=0.000000e+000 result=40 13:02:25 Config A/D Result=40 13:02:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:25 Get A/D filter: -9.255963e+061 result=40 13:02:25 Get A/D value=-858993460 result=40 13:02:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:25 Aux= 13:02:25 Message to Camera, serial 88727 queued 13:03:02 Received message from Master: op=PointingHead serial=88740 13:03:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:03:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:03:02 Point started: ret=0 13:03:02 point_skyscan result=0 13:03:03 Check angles 13:03:03 SkyScan query 13:03:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:03:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:03:04 Message to Master queued w/err=0: serial=88740 error=0 13:03:09 Received message from Master: op=Filter serial=88741 13:03:09 Color wheel filter change from 0 to 0 13:03:09 FLIGetFilterPos err=0 currentPosition=0 13:03:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:09 Filter is already there-color wheel unchanged 13:03:09 Received message from Master: op=Shutter serial=88742 13:03:09 Shutter LASER close 13:03:09 Received message from Camera: op=State serial=88744 13:03:09 GetSingleValue result=40 Value=cccccccc 13:03:09 SkyScan query 13:03:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:03:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:09 Parameters OK 13:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:09 Set A/D data flow result=40 13:03:09 Set A/D channel type result=40 13:03:09 Set A/D encoding result=40 13:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:09 Set channel filter=0.000000e+000 result=40 13:03:09 Config A/D Result=40 13:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:09 Get A/D filter: -9.255963e+061 result=40 13:03:09 Get A/D value=-858993460 result=40 13:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:09 Parameters OK 13:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:09 Set A/D data flow result=40 13:03:09 Set A/D channel type result=40 13:03:09 Set A/D encoding result=40 13:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:09 Set channel filter=0.000000e+000 result=40 13:03:09 Config A/D Result=40 13:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:09 Get A/D filter: -9.255963e+061 result=40 13:03:09 Get A/D value=-858993460 result=40 13:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:09 Aux= 13:03:09 Message to Camera, serial 88744 queued 13:03:38 Received message from Master: op=Identify serial=88745 13:03:46 Received message from Master: op=PointingHead serial=88760 13:03:46 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:03:46 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:03:47 Point started: ret=0 13:03:47 point_skyscan result=0 13:03:47 Check angles 13:03:47 SkyScan query 13:03:48 SkyScan query done: ret=0 az=136.35<-9090 ze=-6.51<-12434 Statuses=0009 0008 13:03:48 Msec=0 True Az=136.35 Ze=-6.51 Az status=0009 Ze status=0008 13:03:48 Check angles 13:03:48 SkyScan query 13:03:49 SkyScan query done: ret=0 az=154.185<-10279 ze=-6.495<-12433 Statuses=0009 0008 13:03:49 Msec=750 True Az=154.185 Ze=-6.495 Az status=0009 Ze status=0008 13:03:49 Check angles 13:03:49 SkyScan query 13:03:49 SkyScan query done: ret=0 az=172.005<-11467 ze=-6.495<-12433 Statuses=0009 0008 13:03:49 Msec=1500 True Az=172.005 Ze=-6.495 Az status=0009 Ze status=0008 13:03:50 Check angles 13:03:50 SkyScan query 13:03:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:03:50 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:03:50 Message to Master queued w/err=0: serial=88760 error=0 [UTC 2019-3-3 13:03:50] 13:03:55 Received message from Master: op=Filter serial=88761 13:03:55 Color wheel filter change from 0 to 0 13:03:55 FLIGetFilterPos err=0 currentPosition=0 13:03:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:55 Filter is already there-color wheel unchanged 13:03:55 Received message from Master: op=Shutter serial=88762 13:03:55 Shutter LASER close 13:03:55 Received message from Camera: op=State serial=88764 13:03:55 GetSingleValue result=40 Value=cccccccc 13:03:55 SkyScan query 13:03:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:03:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:56 Parameters OK 13:03:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:56 Set A/D data flow result=40 13:03:56 Set A/D channel type result=40 13:03:56 Set A/D encoding result=40 13:03:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:56 Set channel filter=0.000000e+000 result=40 13:03:56 Config A/D Result=40 13:03:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:56 Get A/D filter: -9.255963e+061 result=40 13:03:56 Get A/D value=-858993460 result=40 13:03:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:56 Parameters OK 13:03:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:56 Set A/D data flow result=40 13:03:56 Set A/D channel type result=40 13:03:56 Set A/D encoding result=40 13:03:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:56 Set channel filter=0.000000e+000 result=40 13:03:56 Config A/D Result=40 13:03:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:56 Get A/D filter: -9.255963e+061 result=40 13:03:56 Get A/D value=-858993460 result=40 13:03:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:56 Aux= 13:03:56 Message to Camera, serial 88764 queued 13:04:33 Received message from Master: op=PointingHead serial=88777 13:04:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:04:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:04:33 Point started: ret=0 13:04:33 point_skyscan result=0 13:04:34 Check angles 13:04:34 SkyScan query 13:04:34 SkyScan query done: ret=0 az=153.225<-10215 ze=6.51<-11566 Statuses=0009 0008 13:04:34 Msec=0 True Az=153.225 Ze=6.51 Az status=0009 Ze status=0008 13:04:35 Check angles 13:04:35 SkyScan query 13:04:35 SkyScan query done: ret=0 az=135.81<-9054 ze=6.495<-11567 Statuses=0009 0008 13:04:35 Msec=750 True Az=135.81 Ze=6.495 Az status=0009 Ze status=0008 13:04:35 Check angles 13:04:35 SkyScan query 13:04:36 SkyScan query done: ret=0 az=118.32<-7888 ze=6.495<-11567 Statuses=0009 0008 13:04:36 Msec=1500 True Az=118.32 Ze=6.495 Az status=0009 Ze status=0008 13:04:36 Check angles 13:04:36 SkyScan query 13:04:37 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 13:04:37 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 13:04:37 Message to Master queued w/err=0: serial=88777 error=0 13:04:42 Received message from Master: op=Filter serial=88778 13:04:42 Color wheel filter change from 0 to 0 13:04:42 FLIGetFilterPos err=0 currentPosition=0 13:04:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:42 Filter is already there-color wheel unchanged 13:04:42 Received message from Master: op=Shutter serial=88779 13:04:42 Shutter LASER close 13:04:42 Received message from Camera: op=State serial=88781 13:04:42 GetSingleValue result=40 Value=cccccccc 13:04:42 SkyScan query 13:04:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:04:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:42 Parameters OK 13:04:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:42 Set A/D data flow result=40 13:04:42 Set A/D channel type result=40 13:04:42 Set A/D encoding result=40 13:04:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:42 Set channel filter=0.000000e+000 result=40 13:04:42 Config A/D Result=40 13:04:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:42 Get A/D filter: -9.255963e+061 result=40 13:04:42 Get A/D value=-858993460 result=40 13:04:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:42 Parameters OK 13:04:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:42 Set A/D data flow result=40 13:04:42 Set A/D channel type result=40 13:04:42 Set A/D encoding result=40 13:04:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:42 Set channel filter=0.000000e+000 result=40 13:04:42 Config A/D Result=40 13:04:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:42 Get A/D filter: -9.255963e+061 result=40 13:04:42 Get A/D value=-858993460 result=40 13:04:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:42 Aux= 13:04:42 Message to Camera, serial 88781 queued 13:05:19 Received message from Master: op=PointingHead serial=88794 13:05:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:05:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:05:20 Point started: ret=0 13:05:20 point_skyscan result=0 13:05:20 Check angles 13:05:20 SkyScan query 13:05:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 13:05:21 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 13:05:21 Check angles 13:05:21 SkyScan query 13:05:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 13:05:22 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 13:05:22 Check angles 13:05:22 SkyScan query 13:05:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.295<-16353 Statuses=0008 0009 13:05:22 Msec=1500 True Az=112.995 Ze=-65.295 Az status=0008 Ze status=0009 13:05:23 Check angles 13:05:23 SkyScan query 13:05:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 13:05:23 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 13:05:23 Check angles 13:05:23 SkyScan query 13:05:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 13:05:24 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 13:05:24 Check angles 13:05:24 SkyScan query 13:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 13:05:25 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 13:05:25 Check angles 13:05:25 SkyScan query 13:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.97<-21998 Statuses=0008 0009 13:05:26 Msec=4500 True Az=112.995 Ze=-149.97 Az status=0008 Ze status=0009 13:05:26 Check angles 13:05:26 SkyScan query 13:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0008 0009 13:05:26 Msec=5250 True Az=112.995 Ze=-171.165 Az status=0008 Ze status=0009 13:05:26 Check angles 13:05:26 SkyScan query 13:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:05:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:05:27 Message to Master queued w/err=0: serial=88794 error=0 13:05:32 Received message from Master: op=Filter serial=88795 13:05:32 Color wheel filter change from 0 to 0 13:05:32 FLIGetFilterPos err=0 currentPosition=0 13:05:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:32 Filter is already there-color wheel unchanged 13:05:32 Received message from Master: op=Shutter serial=88796 13:05:32 Shutter LASER open 13:05:32 Received message from Camera: op=State serial=88798 13:05:32 GetSingleValue result=40 Value=cccccccc 13:05:32 SkyScan query 13:05:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:05:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:33 Parameters OK 13:05:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:33 Set A/D data flow result=40 13:05:33 Set A/D channel type result=40 13:05:33 Set A/D encoding result=40 13:05:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:33 Set channel filter=0.000000e+000 result=40 13:05:33 Config A/D Result=40 13:05:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:33 Get A/D filter: -9.255963e+061 result=40 13:05:33 Get A/D value=-858993460 result=40 13:05:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:33 Parameters OK 13:05:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:33 Set A/D data flow result=40 13:05:33 Set A/D channel type result=40 13:05:33 Set A/D encoding result=40 13:05:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:33 Set channel filter=0.000000e+000 result=40 13:05:33 Config A/D Result=40 13:05:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:33 Get A/D filter: -9.255963e+061 result=40 13:05:33 Get A/D value=-858993460 result=40 13:05:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:33 Aux= 13:05:33 Message to Camera, serial 88798 queued 13:05:41 Received message from Master: op=Shutter serial=88808 13:05:41 Shutter LASER close 13:05:42 Received message from Master: op=PointingHead serial=88812 13:05:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:05:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:05:42 Point started: ret=0 13:05:42 point_skyscan result=0 13:05:43 Check angles 13:05:43 SkyScan query 13:05:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 13:05:44 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 13:05:44 Check angles 13:05:44 SkyScan query 13:05:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 13:05:44 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 13:05:45 Check angles 13:05:45 SkyScan query 13:05:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.395<-18693 Statuses=0008 0009 13:05:45 Msec=1500 True Az=112.995 Ze=-100.395 Az status=0008 Ze status=0009 13:05:45 Check angles 13:05:45 SkyScan query 13:05:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 13:05:46 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 13:05:46 Check angles 13:05:46 SkyScan query 13:05:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.02<-15868 Statuses=0008 0009 13:05:47 Msec=3000 True Az=112.995 Ze=-58.02 Az status=0008 Ze status=0009 13:05:47 Check angles 13:05:47 SkyScan query 13:05:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.645<-14443 Statuses=0008 0009 13:05:47 Msec=3750 True Az=112.995 Ze=-36.645 Az status=0008 Ze status=0009 13:05:48 Check angles 13:05:48 SkyScan query 13:05:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.27<-13018 Statuses=0008 0009 13:05:48 Msec=4500 True Az=112.995 Ze=-15.27 Az status=0008 Ze status=0009 13:05:48 Check angles 13:05:48 SkyScan query 13:05:49 SkyScan query done: ret=0 az=112.995<-7533 ze=5.265<-11649 Statuses=0008 0009 13:05:49 Msec=5250 True Az=112.995 Ze=5.265 Az status=0008 Ze status=0009 13:05:49 Check angles 13:05:49 SkyScan query 13:05:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:05:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:05:50 Message to Master queued w/err=0: serial=88812 error=0 13:05:55 Received message from Master: op=Filter serial=88813 13:05:55 Color wheel filter change from 0 to 0 13:05:55 FLIGetFilterPos err=0 currentPosition=0 13:05:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:55 Filter is already there-color wheel unchanged 13:05:55 Received message from Master: op=Shutter serial=88814 13:05:55 Shutter LASER close 13:05:55 Received message from Camera: op=State serial=88816 13:05:55 GetSingleValue result=40 Value=cccccccc 13:05:55 SkyScan query 13:05:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:05:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:56 Parameters OK 13:05:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:56 Set A/D data flow result=40 13:05:56 Set A/D channel type result=40 13:05:56 Set A/D encoding result=40 13:05:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:56 Set channel filter=0.000000e+000 result=40 13:05:56 Config A/D Result=40 13:05:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:56 Get A/D filter: -9.255963e+061 result=40 13:05:56 Get A/D value=-858993460 result=40 13:05:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:56 Parameters OK 13:05:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:56 Set A/D data flow result=40 13:05:56 Set A/D channel type result=40 13:05:56 Set A/D encoding result=40 13:05:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:56 Set channel filter=0.000000e+000 result=40 13:05:56 Config A/D Result=40 13:05:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:56 Get A/D filter: -9.255963e+061 result=40 13:05:56 Get A/D value=-858993460 result=40 13:05:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:56 Aux= 13:05:56 Message to Camera, serial 88816 queued 13:06:32 Received message from Master: op=PointingHead serial=88829 13:06:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:06:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:06:33 Point started: ret=0 13:06:33 point_skyscan result=0 13:06:34 Check angles 13:06:34 SkyScan query 13:06:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:06:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:06:34 Message to Master queued w/err=0: serial=88829 error=0 13:06:39 Received message from Master: op=Filter serial=88830 13:06:39 Color wheel filter change from 0 to 0 13:06:39 FLIGetFilterPos err=0 currentPosition=0 13:06:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:39 Filter is already there-color wheel unchanged 13:06:39 Received message from Master: op=Shutter serial=88831 13:06:39 Shutter LASER close 13:06:39 Received message from Camera: op=State serial=88833 13:06:39 GetSingleValue result=40 Value=cccccccc 13:06:39 SkyScan query 13:06:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:06:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:40 Parameters OK 13:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:40 Set A/D data flow result=40 13:06:40 Set A/D channel type result=40 13:06:40 Set A/D encoding result=40 13:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:40 Set channel filter=0.000000e+000 result=40 13:06:40 Config A/D Result=40 13:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:40 Get A/D filter: -9.255963e+061 result=40 13:06:40 Get A/D value=-858993460 result=40 13:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:40 Parameters OK 13:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:40 Set A/D data flow result=40 13:06:40 Set A/D channel type result=40 13:06:40 Set A/D encoding result=40 13:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:40 Set channel filter=0.000000e+000 result=40 13:06:40 Config A/D Result=40 13:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:40 Get A/D filter: -9.255963e+061 result=40 13:06:40 Get A/D value=-858993460 result=40 13:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:40 Aux= 13:06:40 Message to Camera, serial 88833 queued 13:07:17 Received message from Master: op=PointingHead serial=88846 13:07:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:07:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:07:17 Point started: ret=0 13:07:17 point_skyscan result=0 13:07:18 Check angles 13:07:18 SkyScan query 13:07:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:07:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:07:18 Message to Master queued w/err=0: serial=88846 error=0 13:07:23 Received message from Master: op=Filter serial=88847 13:07:23 Color wheel filter change from 0 to 0 13:07:23 FLIGetFilterPos err=0 currentPosition=0 13:07:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:23 Filter is already there-color wheel unchanged 13:07:24 Received message from Master: op=Shutter serial=88848 13:07:24 Shutter LASER close 13:07:24 Received message from Camera: op=State serial=88850 13:07:24 GetSingleValue result=40 Value=cccccccc 13:07:24 SkyScan query 13:07:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:07:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:24 Parameters OK 13:07:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:24 Set A/D data flow result=40 13:07:24 Set A/D channel type result=40 13:07:24 Set A/D encoding result=40 13:07:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:24 Set channel filter=0.000000e+000 result=40 13:07:24 Config A/D Result=40 13:07:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:24 Get A/D filter: -9.255963e+061 result=40 13:07:24 Get A/D value=-858993460 result=40 13:07:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:24 Parameters OK 13:07:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:24 Set A/D data flow result=40 13:07:24 Set A/D channel type result=40 13:07:24 Set A/D encoding result=40 13:07:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:24 Set channel filter=0.000000e+000 result=40 13:07:24 Config A/D Result=40 13:07:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:24 Get A/D filter: -9.255963e+061 result=40 13:07:24 Get A/D value=-858993460 result=40 13:07:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:24 Aux= 13:07:24 Message to Camera, serial 88850 queued 13:08:01 Received message from Master: op=PointingHead serial=88863 13:08:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:08:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:08:01 Point started: ret=0 13:08:01 point_skyscan result=0 13:08:02 Check angles 13:08:02 SkyScan query 13:08:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:08:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:08:03 Message to Master queued w/err=0: serial=88863 error=0 13:08:08 Received message from Master: op=Filter serial=88864 13:08:08 Color wheel filter change from 0 to 0 13:08:08 FLIGetFilterPos err=0 currentPosition=0 13:08:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:08 Filter is already there-color wheel unchanged 13:08:08 Received message from Master: op=Shutter serial=88865 13:08:08 Shutter LASER close 13:08:08 Received message from Camera: op=State serial=88867 13:08:08 GetSingleValue result=40 Value=cccccccc 13:08:08 SkyScan query 13:08:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:08:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:08 Parameters OK 13:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:08 Set A/D data flow result=40 13:08:08 Set A/D channel type result=40 13:08:08 Set A/D encoding result=40 13:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:08 Set channel filter=0.000000e+000 result=40 13:08:08 Config A/D Result=40 13:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:08 Get A/D filter: -9.255963e+061 result=40 13:08:08 Get A/D value=-858993460 result=40 13:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:08 Parameters OK 13:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:08 Set A/D data flow result=40 13:08:08 Set A/D channel type result=40 13:08:08 Set A/D encoding result=40 13:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:08 Set channel filter=0.000000e+000 result=40 13:08:08 Config A/D Result=40 13:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:08 Get A/D filter: -9.255963e+061 result=40 13:08:08 Get A/D value=-858993460 result=40 13:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:08 Aux= 13:08:08 Message to Camera, serial 88867 queued 13:08:45 Received message from Master: op=PointingHead serial=88880 13:08:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:08:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:08:46 Point started: ret=0 13:08:46 point_skyscan result=0 13:08:46 Check angles 13:08:46 SkyScan query 13:08:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 13:08:47 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 13:08:47 Check angles 13:08:47 SkyScan query 13:08:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 13:08:48 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 13:08:48 Check angles 13:08:48 SkyScan query 13:08:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 13:08:48 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 13:08:49 Check angles 13:08:49 SkyScan query 13:08:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 13:08:49 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 13:08:49 Check angles 13:08:49 SkyScan query 13:08:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.46<-19164 Statuses=0008 0009 13:08:50 Msec=3000 True Az=112.995 Ze=-107.46 Az status=0008 Ze status=0009 13:08:50 Check angles 13:08:50 SkyScan query 13:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.835<-20589 Statuses=0008 0009 13:08:51 Msec=3750 True Az=112.995 Ze=-128.835 Az status=0008 Ze status=0009 13:08:51 Check angles 13:08:51 SkyScan query 13:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.805<-21987 Statuses=0008 0009 13:08:51 Msec=4500 True Az=112.995 Ze=-149.805 Az status=0008 Ze status=0009 13:08:52 Check angles 13:08:52 SkyScan query 13:08:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.7<-23380 Statuses=0008 0009 13:08:52 Msec=5250 True Az=112.995 Ze=-170.7 Az status=0008 Ze status=0009 13:08:52 Check angles 13:08:52 SkyScan query 13:08:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:08:53 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:08:53 Message to Master queued w/err=0: serial=88880 error=0 13:08:58 Received message from Master: op=Filter serial=88881 13:08:58 Color wheel filter change from 0 to 0 13:08:58 FLIGetFilterPos err=0 currentPosition=0 13:08:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:58 Filter is already there-color wheel unchanged 13:08:58 Received message from Master: op=Shutter serial=88882 13:08:58 Shutter LASER open 13:08:58 Received message from Camera: op=State serial=88884 13:08:58 GetSingleValue result=40 Value=cccccccc 13:08:58 SkyScan query 13:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:08:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:59 Parameters OK 13:08:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:59 Set A/D data flow result=40 13:08:59 Set A/D channel type result=40 13:08:59 Set A/D encoding result=40 13:08:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:59 Set channel filter=0.000000e+000 result=40 13:08:59 Config A/D Result=40 13:08:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:59 Get A/D filter: -9.255963e+061 result=40 13:08:59 Get A/D value=-858993460 result=40 13:08:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:59 Parameters OK 13:08:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:59 Set A/D data flow result=40 13:08:59 Set A/D channel type result=40 13:08:59 Set A/D encoding result=40 13:08:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:59 Set channel filter=0.000000e+000 result=40 13:08:59 Config A/D Result=40 13:08:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:59 Get A/D filter: -9.255963e+061 result=40 13:08:59 Get A/D value=-858993460 result=40 13:08:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:59 Aux= 13:08:59 Message to Camera, serial 88884 queued 13:09:07 Received message from Master: op=Shutter serial=88894 13:09:07 Shutter LASER close 13:09:08 Received message from Master: op=PointingHead serial=88898 13:09:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:09:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:09:08 Point started: ret=0 13:09:08 point_skyscan result=0 13:09:09 Check angles 13:09:09 SkyScan query 13:09:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 13:09:10 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 13:09:10 Check angles 13:09:10 SkyScan query 13:09:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 13:09:10 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 13:09:11 Check angles 13:09:11 SkyScan query 13:09:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 13:09:11 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 13:09:11 Check angles 13:09:11 SkyScan query 13:09:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 13:09:12 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 13:09:12 Check angles 13:09:12 SkyScan query 13:09:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.95<-15930 Statuses=0008 0009 13:09:13 Msec=3000 True Az=112.995 Ze=-58.95 Az status=0008 Ze status=0009 13:09:13 Check angles 13:09:13 SkyScan query 13:09:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 13:09:13 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 13:09:14 Check angles 13:09:14 SkyScan query 13:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.575<-13105 Statuses=0008 0009 13:09:14 Msec=4500 True Az=112.995 Ze=-16.575 Az status=0008 Ze status=0009 13:09:14 Check angles 13:09:14 SkyScan query 13:09:15 SkyScan query done: ret=0 az=112.995<-7533 ze=4.305<-11713 Statuses=0008 0009 13:09:15 Msec=5250 True Az=112.995 Ze=4.305 Az status=0008 Ze status=0009 13:09:15 Check angles 13:09:15 SkyScan query 13:09:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:09:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:09:16 Message to Master queued w/err=0: serial=88898 error=0 13:09:21 Received message from Master: op=Filter serial=88899 13:09:21 Color wheel filter change from 0 to 0 13:09:21 FLIGetFilterPos err=0 currentPosition=0 13:09:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:21 Filter is already there-color wheel unchanged 13:09:21 Received message from Master: op=Shutter serial=88900 13:09:21 Shutter LASER close 13:09:21 Received message from Camera: op=State serial=88902 13:09:21 GetSingleValue result=40 Value=cccccccc 13:09:21 SkyScan query 13:09:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:09:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:22 Parameters OK 13:09:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:22 Set A/D data flow result=40 13:09:22 Set A/D channel type result=40 13:09:22 Set A/D encoding result=40 13:09:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:22 Set channel filter=0.000000e+000 result=40 13:09:22 Config A/D Result=40 13:09:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:22 Get A/D filter: -9.255963e+061 result=40 13:09:22 Get A/D value=-858993460 result=40 13:09:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:22 Parameters OK 13:09:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:22 Set A/D data flow result=40 13:09:22 Set A/D channel type result=40 13:09:22 Set A/D encoding result=40 13:09:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:22 Set channel filter=0.000000e+000 result=40 13:09:22 Config A/D Result=40 13:09:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:22 Get A/D filter: -9.255963e+061 result=40 13:09:22 Get A/D value=-858993460 result=40 13:09:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:22 Aux= 13:09:22 Message to Camera, serial 88902 queued 13:09:58 Received message from Master: op=PointingHead serial=88915 13:09:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:09:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:09:59 Point started: ret=0 13:09:59 point_skyscan result=0 13:10:00 Check angles 13:10:00 SkyScan query 13:10:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:10:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:10:00 Message to Master queued w/err=0: serial=88915 error=0 13:10:05 Received message from Master: op=Filter serial=88916 13:10:05 Color wheel filter change from 0 to 0 13:10:05 FLIGetFilterPos err=0 currentPosition=0 13:10:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:05 Filter is already there-color wheel unchanged 13:10:05 Received message from Master: op=Shutter serial=88917 13:10:05 Shutter LASER close 13:10:05 Received message from Camera: op=State serial=88919 13:10:05 GetSingleValue result=40 Value=cccccccc 13:10:05 SkyScan query 13:10:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:10:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:06 Parameters OK 13:10:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:06 Set A/D data flow result=40 13:10:06 Set A/D channel type result=40 13:10:06 Set A/D encoding result=40 13:10:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:06 Set channel filter=0.000000e+000 result=40 13:10:06 Config A/D Result=40 13:10:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:06 Get A/D filter: -9.255963e+061 result=40 13:10:06 Get A/D value=-858993460 result=40 13:10:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:06 Parameters OK 13:10:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:06 Set A/D data flow result=40 13:10:06 Set A/D channel type result=40 13:10:06 Set A/D encoding result=40 13:10:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:06 Set channel filter=0.000000e+000 result=40 13:10:06 Config A/D Result=40 13:10:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:06 Get A/D filter: -9.255963e+061 result=40 13:10:06 Get A/D value=-858993460 result=40 13:10:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:06 Aux= 13:10:06 Message to Camera, serial 88919 queued 13:10:42 Received message from Master: op=PointingHead serial=88931 13:10:42 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:10:42 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:10:42 Point started: ret=0 13:10:42 point_skyscan result=0 13:10:43 Check angles 13:10:43 SkyScan query 13:10:43 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 13:10:43 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 13:10:44 Check angles 13:10:44 SkyScan query 13:10:44 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 13:10:44 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 13:10:44 Check angles 13:10:44 SkyScan query 13:10:45 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 13:10:45 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 13:10:45 Check angles 13:10:45 SkyScan query 13:10:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:10:46 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:10:46 Message to Master queued w/err=0: serial=88931 error=0 13:10:51 Received message from Master: op=Filter serial=88932 13:10:51 Color wheel filter change from 0 to 0 13:10:51 FLIGetFilterPos err=0 currentPosition=0 13:10:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:51 Filter is already there-color wheel unchanged 13:10:51 Received message from Master: op=Shutter serial=88933 13:10:51 Shutter LASER close 13:10:51 Received message from Camera: op=State serial=88935 13:10:51 GetSingleValue result=40 Value=cccccccc 13:10:51 SkyScan query 13:10:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:10:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:52 Parameters OK 13:10:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:52 Set A/D data flow result=40 13:10:52 Set A/D channel type result=40 13:10:52 Set A/D encoding result=40 13:10:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:52 Set channel filter=0.000000e+000 result=40 13:10:52 Config A/D Result=40 13:10:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:52 Get A/D filter: -9.255963e+061 result=40 13:10:52 Get A/D value=-858993460 result=40 13:10:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:52 Parameters OK 13:10:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:52 Set A/D data flow result=40 13:10:52 Set A/D channel type result=40 13:10:52 Set A/D encoding result=40 13:10:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:52 Set channel filter=0.000000e+000 result=40 13:10:52 Config A/D Result=40 13:10:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:52 Get A/D filter: -9.255963e+061 result=40 13:10:52 Get A/D value=-858993460 result=40 13:10:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:52 Aux= 13:10:52 Message to Camera, serial 88935 queued 13:11:28 Received message from Master: op=PointingHead serial=88948 13:11:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:11:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:11:29 Point started: ret=0 13:11:29 point_skyscan result=0 13:11:29 Check angles 13:11:29 SkyScan query 13:11:30 SkyScan query done: ret=0 az=153.015<-10201 ze=6.51<-11566 Statuses=0009 0008 13:11:30 Msec=0 True Az=153.015 Ze=6.51 Az status=0009 Ze status=0008 13:11:30 Check angles 13:11:30 SkyScan query 13:11:31 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 13:11:31 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 13:11:31 Check angles 13:11:31 SkyScan query 13:11:32 SkyScan query done: ret=0 az=117.39<-7826 ze=6.495<-11567 Statuses=0009 0008 13:11:32 Msec=1500 True Az=117.39 Ze=6.495 Az status=0009 Ze status=0008 13:11:32 Check angles 13:11:32 SkyScan query 13:11:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:11:32 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:11:32 Message to Master queued w/err=0: serial=88948 error=0 13:11:37 Received message from Master: op=Filter serial=88949 13:11:37 Color wheel filter change from 0 to 0 13:11:37 FLIGetFilterPos err=0 currentPosition=0 13:11:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:37 Filter is already there-color wheel unchanged 13:11:37 Received message from Master: op=Shutter serial=88950 13:11:37 Shutter LASER close 13:11:37 Received message from Camera: op=State serial=88952 13:11:37 GetSingleValue result=40 Value=cccccccc 13:11:37 SkyScan query 13:11:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:11:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:38 Parameters OK 13:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:38 Set A/D data flow result=40 13:11:38 Set A/D channel type result=40 13:11:38 Set A/D encoding result=40 13:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:38 Set channel filter=0.000000e+000 result=40 13:11:38 Config A/D Result=40 13:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:38 Get A/D filter: -9.255963e+061 result=40 13:11:38 Get A/D value=-858993460 result=40 13:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:38 Parameters OK 13:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:38 Set A/D data flow result=40 13:11:38 Set A/D channel type result=40 13:11:38 Set A/D encoding result=40 13:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:38 Set channel filter=0.000000e+000 result=40 13:11:38 Config A/D Result=40 13:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:38 Get A/D filter: -9.255963e+061 result=40 13:11:38 Get A/D value=-858993460 result=40 13:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:38 Aux= 13:11:38 Message to Camera, serial 88952 queued 13:12:15 Received message from Master: op=PointingHead serial=88965 13:12:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:12:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:12:15 Point started: ret=0 13:12:15 point_skyscan result=0 13:12:16 Check angles 13:12:16 SkyScan query 13:12:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 13:12:17 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 13:12:17 Check angles 13:12:17 SkyScan query 13:12:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 13:12:17 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 13:12:17 Check angles 13:12:17 SkyScan query 13:12:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 13:12:18 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 13:12:18 Check angles 13:12:18 SkyScan query 13:12:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 13:12:19 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 13:12:19 Check angles 13:12:19 SkyScan query 13:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 13:12:20 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 13:12:20 Check angles 13:12:20 SkyScan query 13:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.845<-20523 Statuses=0008 0009 13:12:20 Msec=3750 True Az=112.995 Ze=-127.845 Az status=0008 Ze status=0009 13:12:20 Check angles 13:12:20 SkyScan query 13:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.785<-21919 Statuses=0008 0009 13:12:21 Msec=4500 True Az=112.995 Ze=-148.785 Az status=0008 Ze status=0009 13:12:21 Check angles 13:12:21 SkyScan query 13:12:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.725<-23315 Statuses=0008 0009 13:12:22 Msec=5250 True Az=112.995 Ze=-169.725 Az status=0008 Ze status=0009 13:12:22 Check angles 13:12:22 SkyScan query 13:12:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:12:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:12:23 Message to Master queued w/err=0: serial=88965 error=0 13:12:28 Received message from Master: op=Filter serial=88966 13:12:28 Color wheel filter change from 0 to 0 13:12:28 FLIGetFilterPos err=0 currentPosition=0 13:12:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:28 Filter is already there-color wheel unchanged 13:12:28 Received message from Master: op=Shutter serial=88967 13:12:28 Shutter LASER open 13:12:28 Received message from Camera: op=State serial=88969 13:12:28 GetSingleValue result=40 Value=cccccccc 13:12:28 SkyScan query 13:12:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:12:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:28 Parameters OK 13:12:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:28 Set A/D data flow result=40 13:12:28 Set A/D channel type result=40 13:12:28 Set A/D encoding result=40 13:12:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:28 Set channel filter=0.000000e+000 result=40 13:12:28 Config A/D Result=40 13:12:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:28 Get A/D filter: -9.255963e+061 result=40 13:12:28 Get A/D value=-858993460 result=40 13:12:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:28 Parameters OK 13:12:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:28 Set A/D data flow result=40 13:12:28 Set A/D channel type result=40 13:12:28 Set A/D encoding result=40 13:12:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:28 Set channel filter=0.000000e+000 result=40 13:12:28 Config A/D Result=40 13:12:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:28 Get A/D filter: -9.255963e+061 result=40 13:12:28 Get A/D value=-858993460 result=40 13:12:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:28 Aux= 13:12:28 Message to Camera, serial 88969 queued 13:12:37 Received message from Master: op=Shutter serial=88979 13:12:37 Shutter LASER close 13:12:37 Received message from Master: op=PointingHead serial=88983 13:12:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:12:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:12:38 Point started: ret=0 13:12:38 point_skyscan result=0 13:12:38 Check angles 13:12:38 SkyScan query 13:12:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 13:12:39 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 13:12:39 Check angles 13:12:39 SkyScan query 13:12:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 13:12:40 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 13:12:40 Check angles 13:12:40 SkyScan query 13:12:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 13:12:41 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 13:12:41 Check angles 13:12:41 SkyScan query 13:12:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.665<-17311 Statuses=0008 0009 13:12:41 Msec=2250 True Az=112.995 Ze=-79.665 Az status=0008 Ze status=0009 13:12:41 Check angles 13:12:41 SkyScan query 13:12:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 13:12:42 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 13:12:42 Check angles 13:12:42 SkyScan query 13:12:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 13:12:43 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 13:12:43 Check angles 13:12:43 SkyScan query 13:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.35<-13090 Statuses=0008 0009 13:12:44 Msec=4500 True Az=112.995 Ze=-16.35 Az status=0008 Ze status=0009 13:12:44 Check angles 13:12:44 SkyScan query 13:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 13:12:44 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 13:12:44 Check angles 13:12:44 SkyScan query 13:12:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:12:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:12:45 Message to Master queued w/err=0: serial=88983 error=0 13:12:50 Received message from Master: op=Filter serial=88984 13:12:50 Color wheel filter change from 0 to 0 13:12:50 FLIGetFilterPos err=0 currentPosition=0 13:12:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:50 Filter is already there-color wheel unchanged 13:12:50 Received message from Master: op=Shutter serial=88985 13:12:50 Shutter LASER close 13:12:50 Received message from Camera: op=State serial=88987 13:12:50 GetSingleValue result=40 Value=cccccccc 13:12:50 SkyScan query 13:12:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:12:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:51 Parameters OK 13:12:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:51 Set A/D data flow result=40 13:12:51 Set A/D channel type result=40 13:12:51 Set A/D encoding result=40 13:12:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:51 Set channel filter=0.000000e+000 result=40 13:12:51 Config A/D Result=40 13:12:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:51 Get A/D filter: -9.255963e+061 result=40 13:12:51 Get A/D value=-858993460 result=40 13:12:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:51 Parameters OK 13:12:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:51 Set A/D data flow result=40 13:12:51 Set A/D channel type result=40 13:12:51 Set A/D encoding result=40 13:12:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:51 Set channel filter=0.000000e+000 result=40 13:12:51 Config A/D Result=40 13:12:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:51 Get A/D filter: -9.255963e+061 result=40 13:12:51 Get A/D value=-858993460 result=40 13:12:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:51 Aux= 13:12:51 Message to Camera, serial 88987 queued 13:13:28 Received message from Master: op=PointingHead serial=89000 13:13:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:13:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:13:28 Point started: ret=0 13:13:28 point_skyscan result=0 13:13:29 Check angles 13:13:29 SkyScan query 13:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:13:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:13:29 Message to Master queued w/err=0: serial=89000 error=0 13:13:34 Received message from Master: op=Filter serial=89001 13:13:34 Color wheel filter change from 0 to 0 13:13:34 FLIGetFilterPos err=0 currentPosition=0 13:13:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:34 Filter is already there-color wheel unchanged 13:13:35 Received message from Master: op=Shutter serial=89002 13:13:35 Shutter LASER close 13:13:35 Received message from Camera: op=State serial=89004 13:13:35 GetSingleValue result=40 Value=cccccccc 13:13:35 SkyScan query 13:13:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:13:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:35 Parameters OK 13:13:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:35 Set A/D data flow result=40 13:13:35 Set A/D channel type result=40 13:13:35 Set A/D encoding result=40 13:13:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:35 Set channel filter=0.000000e+000 result=40 13:13:35 Config A/D Result=40 13:13:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:35 Get A/D filter: -9.255963e+061 result=40 13:13:35 Get A/D value=-858993460 result=40 13:13:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:35 Parameters OK 13:13:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:35 Set A/D data flow result=40 13:13:35 Set A/D channel type result=40 13:13:35 Set A/D encoding result=40 13:13:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:35 Set channel filter=0.000000e+000 result=40 13:13:35 Config A/D Result=40 13:13:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:35 Get A/D filter: -9.255963e+061 result=40 13:13:35 Get A/D value=-858993460 result=40 13:13:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:35 Aux= 13:13:35 Message to Camera, serial 89004 queued 13:14:12 Received message from Master: op=PointingHead serial=89017 13:14:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:14:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:14:12 Point started: ret=0 13:14:12 point_skyscan result=0 13:14:13 Check angles 13:14:13 SkyScan query 13:14:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:14:14 Message to Master queued w/err=0: serial=89017 error=0 [UTC 2019-3-3 13:14:19] 13:14:19 Received message from Master: op=Filter serial=89018 13:14:19 Color wheel filter change from 0 to 0 13:14:19 FLIGetFilterPos err=0 currentPosition=0 13:14:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:19 Filter is already there-color wheel unchanged 13:14:19 Received message from Master: op=Shutter serial=89019 13:14:19 Shutter LASER close 13:14:19 Received message from Camera: op=State serial=89021 13:14:19 GetSingleValue result=40 Value=cccccccc 13:14:19 SkyScan query 13:14:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:20 Parameters OK 13:14:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:20 Set A/D data flow result=40 13:14:20 Set A/D channel type result=40 13:14:20 Set A/D encoding result=40 13:14:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:20 Set channel filter=0.000000e+000 result=40 13:14:20 Config A/D Result=40 13:14:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:20 Get A/D filter: -9.255963e+061 result=40 13:14:20 Get A/D value=-858993460 result=40 13:14:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:20 Parameters OK 13:14:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:20 Set A/D data flow result=40 13:14:20 Set A/D channel type result=40 13:14:20 Set A/D encoding result=40 13:14:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:20 Set channel filter=0.000000e+000 result=40 13:14:20 Config A/D Result=40 13:14:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:20 Get A/D filter: -9.255963e+061 result=40 13:14:20 Get A/D value=-858993460 result=40 13:14:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:20 Aux= 13:14:20 Message to Camera, serial 89021 queued 13:14:56 Received message from Master: op=PointingHead serial=89034 13:14:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:14:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:14:57 Point started: ret=0 13:14:57 point_skyscan result=0 13:14:58 Check angles 13:14:58 SkyScan query 13:14:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:14:58 Message to Master queued w/err=0: serial=89034 error=0 13:15:03 Received message from Master: op=Filter serial=89035 13:15:03 Color wheel filter change from 0 to 0 13:15:03 FLIGetFilterPos err=0 currentPosition=0 13:15:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:03 Filter is already there-color wheel unchanged 13:15:03 Received message from Master: op=Shutter serial=89036 13:15:03 Shutter LASER close 13:15:03 Received message from Camera: op=State serial=89038 13:15:03 GetSingleValue result=40 Value=cccccccc 13:15:03 SkyScan query 13:15:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:15:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:04 Parameters OK 13:15:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:04 Set A/D data flow result=40 13:15:04 Set A/D channel type result=40 13:15:04 Set A/D encoding result=40 13:15:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:04 Set channel filter=0.000000e+000 result=40 13:15:04 Config A/D Result=40 13:15:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:04 Get A/D filter: -9.255963e+061 result=40 13:15:04 Get A/D value=-858993460 result=40 13:15:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:04 Parameters OK 13:15:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:04 Set A/D data flow result=40 13:15:04 Set A/D channel type result=40 13:15:04 Set A/D encoding result=40 13:15:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:04 Set channel filter=0.000000e+000 result=40 13:15:04 Config A/D Result=40 13:15:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:04 Get A/D filter: -9.255963e+061 result=40 13:15:04 Get A/D value=-858993460 result=40 13:15:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:04 Aux= 13:15:04 Message to Camera, serial 89038 queued 13:15:40 Received message from Master: op=PointingHead serial=89050 13:15:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:15:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:15:40 Point started: ret=0 13:15:40 point_skyscan result=0 13:15:41 Check angles 13:15:41 SkyScan query 13:15:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 13:15:41 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 13:15:42 Check angles 13:15:42 SkyScan query 13:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.055<-14937 Statuses=0008 0009 13:15:42 Msec=750 True Az=112.995 Ze=-44.055 Az status=0008 Ze status=0009 13:15:42 Check angles 13:15:42 SkyScan query 13:15:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 13:15:43 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 13:15:43 Check angles 13:15:43 SkyScan query 13:15:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.995<-17733 Statuses=0008 0009 13:15:44 Msec=2250 True Az=112.995 Ze=-85.995 Az status=0008 Ze status=0009 13:15:44 Check angles 13:15:44 SkyScan query 13:15:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.37<-19158 Statuses=0008 0009 13:15:44 Msec=3000 True Az=112.995 Ze=-107.37 Az status=0008 Ze status=0009 13:15:45 Check angles 13:15:45 SkyScan query 13:15:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.31<-20554 Statuses=0008 0009 13:15:45 Msec=3750 True Az=112.995 Ze=-128.31 Az status=0008 Ze status=0009 13:15:45 Check angles 13:15:45 SkyScan query 13:15:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.28<-21952 Statuses=0008 0009 13:15:46 Msec=4500 True Az=112.995 Ze=-149.28 Az status=0008 Ze status=0009 13:15:46 Check angles 13:15:46 SkyScan query 13:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 13:15:47 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 13:15:47 Check angles 13:15:47 SkyScan query 13:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:15:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:15:48 Message to Master queued w/err=0: serial=89050 error=0 13:15:53 Received message from Master: op=Filter serial=89051 13:15:53 Color wheel filter change from 0 to 0 13:15:53 FLIGetFilterPos err=0 currentPosition=0 13:15:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:53 Filter is already there-color wheel unchanged 13:15:53 Received message from Master: op=Shutter serial=89052 13:15:53 Shutter LASER open 13:15:53 Received message from Camera: op=State serial=89054 13:15:53 GetSingleValue result=40 Value=cccccccc 13:15:53 SkyScan query 13:15:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:15:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:53 Parameters OK 13:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:53 Set A/D data flow result=40 13:15:53 Set A/D channel type result=40 13:15:53 Set A/D encoding result=40 13:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:53 Set channel filter=0.000000e+000 result=40 13:15:53 Config A/D Result=40 13:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:53 Get A/D filter: -9.255963e+061 result=40 13:15:53 Get A/D value=-858993460 result=40 13:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:53 Parameters OK 13:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:53 Set A/D data flow result=40 13:15:53 Set A/D channel type result=40 13:15:53 Set A/D encoding result=40 13:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:53 Set channel filter=0.000000e+000 result=40 13:15:53 Config A/D Result=40 13:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:53 Get A/D filter: -9.255963e+061 result=40 13:15:53 Get A/D value=-858993460 result=40 13:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:53 Aux= 13:15:53 Message to Camera, serial 89054 queued 13:16:02 Received message from Master: op=Shutter serial=89064 13:16:02 Shutter LASER close 13:16:02 Received message from Master: op=PointingHead serial=89068 13:16:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:16:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:16:03 Point started: ret=0 13:16:03 point_skyscan result=0 13:16:04 Check angles 13:16:04 SkyScan query 13:16:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 13:16:04 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 13:16:04 Check angles 13:16:04 SkyScan query 13:16:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 13:16:05 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 13:16:05 Check angles 13:16:05 SkyScan query 13:16:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 13:16:06 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 13:16:06 Check angles 13:16:06 SkyScan query 13:16:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 13:16:06 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 13:16:07 Check angles 13:16:07 SkyScan query 13:16:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.74<-15916 Statuses=0008 0009 13:16:07 Msec=3000 True Az=112.995 Ze=-58.74 Az status=0008 Ze status=0009 13:16:07 Check angles 13:16:07 SkyScan query 13:16:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 13:16:08 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 13:16:08 Check angles 13:16:08 SkyScan query 13:16:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 13:16:09 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 13:16:09 Check angles 13:16:09 SkyScan query 13:16:09 SkyScan query done: ret=0 az=112.995<-7533 ze=4.47<-11702 Statuses=0008 0009 13:16:09 Msec=5250 True Az=112.995 Ze=4.47 Az status=0008 Ze status=0009 13:16:10 Check angles 13:16:10 SkyScan query 13:16:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:16:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:16:10 Message to Master queued w/err=0: serial=89068 error=0 13:16:15 Received message from Master: op=Filter serial=89069 13:16:15 Color wheel filter change from 0 to 0 13:16:15 FLIGetFilterPos err=0 currentPosition=0 13:16:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:15 Filter is already there-color wheel unchanged 13:16:15 Received message from Master: op=Shutter serial=89070 13:16:15 Shutter LASER close 13:16:16 Received message from Camera: op=State serial=89072 13:16:16 GetSingleValue result=40 Value=cccccccc 13:16:16 SkyScan query 13:16:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:16:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:16 Parameters OK 13:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:16 Set A/D data flow result=40 13:16:16 Set A/D channel type result=40 13:16:16 Set A/D encoding result=40 13:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:16 Set channel filter=0.000000e+000 result=40 13:16:16 Config A/D Result=40 13:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:16 Get A/D filter: -9.255963e+061 result=40 13:16:16 Get A/D value=-858993460 result=40 13:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:16 Parameters OK 13:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:16 Set A/D data flow result=40 13:16:16 Set A/D channel type result=40 13:16:16 Set A/D encoding result=40 13:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:16 Set channel filter=0.000000e+000 result=40 13:16:16 Config A/D Result=40 13:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:16 Get A/D filter: -9.255963e+061 result=40 13:16:16 Get A/D value=-858993460 result=40 13:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:16 Aux= 13:16:16 Message to Camera, serial 89072 queued 13:16:53 Received message from Master: op=PointingHead serial=89085 13:16:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:16:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:16:53 Point started: ret=0 13:16:53 point_skyscan result=0 13:16:54 Check angles 13:16:54 SkyScan query 13:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:16:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:16:55 Message to Master queued w/err=0: serial=89085 error=0 13:17:00 Received message from Master: op=Filter serial=89086 13:17:00 Color wheel filter change from 0 to 0 13:17:00 FLIGetFilterPos err=0 currentPosition=0 13:17:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:00 Filter is already there-color wheel unchanged 13:17:00 Received message from Master: op=Shutter serial=89087 13:17:00 Shutter LASER close 13:17:00 Received message from Camera: op=State serial=89089 13:17:00 GetSingleValue result=40 Value=cccccccc 13:17:00 SkyScan query 13:17:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:17:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:00 Parameters OK 13:17:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:00 Set A/D data flow result=40 13:17:00 Set A/D channel type result=40 13:17:00 Set A/D encoding result=40 13:17:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:00 Set channel filter=0.000000e+000 result=40 13:17:00 Config A/D Result=40 13:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:00 Get A/D filter: -9.255963e+061 result=40 13:17:00 Get A/D value=-858993460 result=40 13:17:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:00 Parameters OK 13:17:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:00 Set A/D data flow result=40 13:17:00 Set A/D channel type result=40 13:17:00 Set A/D encoding result=40 13:17:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:00 Set channel filter=0.000000e+000 result=40 13:17:00 Config A/D Result=40 13:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:00 Get A/D filter: -9.255963e+061 result=40 13:17:00 Get A/D value=-858993460 result=40 13:17:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:00 Aux= 13:17:00 Message to Camera, serial 89089 queued 13:17:37 Received message from Master: op=PointingHead serial=89102 13:17:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:17:37 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:17:38 Point started: ret=0 13:17:38 point_skyscan result=0 13:17:38 Check angles 13:17:38 SkyScan query 13:17:39 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 13:17:39 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 13:17:39 Check angles 13:17:39 SkyScan query 13:17:40 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.495<-12433 Statuses=0009 0008 13:17:40 Msec=750 True Az=153.51 Ze=-6.495 Az status=0009 Ze status=0008 13:17:40 Check angles 13:17:40 SkyScan query 13:17:40 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 13:17:40 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 13:17:41 Check angles 13:17:41 SkyScan query 13:17:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:17:41 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:17:41 Message to Master queued w/err=0: serial=89102 error=0 13:17:46 Received message from Master: op=Filter serial=89103 13:17:46 Color wheel filter change from 0 to 0 13:17:46 FLIGetFilterPos err=0 currentPosition=0 13:17:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:46 Filter is already there-color wheel unchanged 13:17:46 Received message from Master: op=Shutter serial=89104 13:17:46 Shutter LASER close 13:17:46 Received message from Camera: op=State serial=89106 13:17:46 GetSingleValue result=40 Value=cccccccc 13:17:46 SkyScan query 13:17:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:17:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:47 Parameters OK 13:17:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:47 Set A/D data flow result=40 13:17:47 Set A/D channel type result=40 13:17:47 Set A/D encoding result=40 13:17:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:47 Set channel filter=0.000000e+000 result=40 13:17:47 Config A/D Result=40 13:17:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:47 Get A/D filter: -9.255963e+061 result=40 13:17:47 Get A/D value=-858993460 result=40 13:17:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:47 Parameters OK 13:17:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:47 Set A/D data flow result=40 13:17:47 Set A/D channel type result=40 13:17:47 Set A/D encoding result=40 13:17:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:47 Set channel filter=0.000000e+000 result=40 13:17:47 Config A/D Result=40 13:17:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:47 Get A/D filter: -9.255963e+061 result=40 13:17:47 Get A/D value=-858993460 result=40 13:17:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:47 Aux= 13:17:47 Message to Camera, serial 89106 queued 13:18:24 Received message from Master: op=PointingHead serial=89119 13:18:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:18:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:18:24 Point started: ret=0 13:18:24 point_skyscan result=0 13:18:25 Check angles 13:18:25 SkyScan query 13:18:25 SkyScan query done: ret=0 az=153.18<-10212 ze=6.51<-11566 Statuses=0009 0008 13:18:25 Msec=0 True Az=153.18 Ze=6.51 Az status=0009 Ze status=0008 13:18:26 Check angles 13:18:26 SkyScan query 13:18:26 SkyScan query done: ret=0 az=135.675<-9045 ze=6.495<-11567 Statuses=0009 0008 13:18:26 Msec=750 True Az=135.675 Ze=6.495 Az status=0009 Ze status=0008 13:18:26 Check angles 13:18:26 SkyScan query 13:18:27 SkyScan query done: ret=0 az=117.615<-7841 ze=6.495<-11567 Statuses=0009 0008 13:18:27 Msec=1500 True Az=117.615 Ze=6.495 Az status=0009 Ze status=0008 13:18:27 Check angles 13:18:27 SkyScan query 13:18:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:18:28 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:18:28 Message to Master queued w/err=0: serial=89119 error=0 13:18:33 Received message from Master: op=Filter serial=89120 13:18:33 Color wheel filter change from 0 to 0 13:18:33 FLIGetFilterPos err=0 currentPosition=0 13:18:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:33 Filter is already there-color wheel unchanged 13:18:33 Received message from Master: op=Shutter serial=89121 13:18:33 Shutter LASER close 13:18:33 Received message from Camera: op=State serial=89123 13:18:33 GetSingleValue result=40 Value=cccccccc 13:18:33 SkyScan query 13:18:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:18:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:33 Parameters OK 13:18:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:33 Set A/D data flow result=40 13:18:33 Set A/D channel type result=40 13:18:33 Set A/D encoding result=40 13:18:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:33 Set channel filter=0.000000e+000 result=40 13:18:33 Config A/D Result=40 13:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:33 Get A/D filter: -9.255963e+061 result=40 13:18:33 Get A/D value=-858993460 result=40 13:18:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:33 Parameters OK 13:18:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:33 Set A/D data flow result=40 13:18:33 Set A/D channel type result=40 13:18:33 Set A/D encoding result=40 13:18:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:33 Set channel filter=0.000000e+000 result=40 13:18:33 Config A/D Result=40 13:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:33 Get A/D filter: -9.255963e+061 result=40 13:18:33 Get A/D value=-858993460 result=40 13:18:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:33 Aux= 13:18:33 Message to Camera, serial 89123 queued 13:19:10 Received message from Master: op=PointingHead serial=89136 13:19:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:19:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:19:11 Point started: ret=0 13:19:11 point_skyscan result=0 13:19:11 Check angles 13:19:11 SkyScan query 13:19:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 13:19:12 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 13:19:12 Check angles 13:19:12 SkyScan query 13:19:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 13:19:13 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 13:19:13 Check angles 13:19:13 SkyScan query 13:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.31<-16354 Statuses=0008 0009 13:19:14 Msec=1500 True Az=112.995 Ze=-65.31 Az status=0008 Ze status=0009 13:19:14 Check angles 13:19:14 SkyScan query 13:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.28<-17752 Statuses=0008 0009 13:19:14 Msec=2250 True Az=112.995 Ze=-86.28 Az status=0008 Ze status=0009 13:19:14 Check angles 13:19:14 SkyScan query 13:19:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.655<-19177 Statuses=0008 0009 13:19:15 Msec=3000 True Az=112.995 Ze=-107.655 Az status=0008 Ze status=0009 13:19:15 Check angles 13:19:15 SkyScan query 13:19:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 13:19:16 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 13:19:16 Check angles 13:19:16 SkyScan query 13:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.55<-21970 Statuses=0008 0009 13:19:17 Msec=4500 True Az=112.995 Ze=-149.55 Az status=0008 Ze status=0009 13:19:17 Check angles 13:19:17 SkyScan query 13:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.835<-23389 Statuses=0008 0009 13:19:17 Msec=5250 True Az=112.995 Ze=-170.835 Az status=0008 Ze status=0009 13:19:17 Check angles 13:19:17 SkyScan query 13:19:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:19:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:19:18 Message to Master queued w/err=0: serial=89136 error=0 13:19:23 Received message from Master: op=Filter serial=89137 13:19:23 Color wheel filter change from 0 to 0 13:19:23 FLIGetFilterPos err=0 currentPosition=0 13:19:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:23 Filter is already there-color wheel unchanged 13:19:23 Received message from Master: op=Shutter serial=89138 13:19:23 Shutter LASER open 13:19:23 Received message from Camera: op=State serial=89140 13:19:23 GetSingleValue result=40 Value=cccccccc 13:19:23 SkyScan query 13:19:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:19:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:24 Parameters OK 13:19:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:24 Set A/D data flow result=40 13:19:24 Set A/D channel type result=40 13:19:24 Set A/D encoding result=40 13:19:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:24 Set channel filter=0.000000e+000 result=40 13:19:24 Config A/D Result=40 13:19:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:24 Get A/D filter: -9.255963e+061 result=40 13:19:24 Get A/D value=-858993460 result=40 13:19:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:24 Parameters OK 13:19:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:24 Set A/D data flow result=40 13:19:24 Set A/D channel type result=40 13:19:24 Set A/D encoding result=40 13:19:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:24 Set channel filter=0.000000e+000 result=40 13:19:24 Config A/D Result=40 13:19:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:24 Get A/D filter: -9.255963e+061 result=40 13:19:24 Get A/D value=-858993460 result=40 13:19:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:24 Aux= 13:19:24 Message to Camera, serial 89140 queued 13:19:32 Received message from Master: op=Shutter serial=89150 13:19:32 Shutter LASER close 13:19:33 Received message from Master: op=PointingHead serial=89154 13:19:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:19:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:19:33 Point started: ret=0 13:19:33 point_skyscan result=0 13:19:34 Check angles 13:19:34 SkyScan query 13:19:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 13:19:35 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 13:19:35 Check angles 13:19:35 SkyScan query 13:19:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 13:19:35 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 13:19:36 Check angles 13:19:36 SkyScan query 13:19:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 13:19:36 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 13:19:36 Check angles 13:19:36 SkyScan query 13:19:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 13:19:37 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 13:19:37 Check angles 13:19:37 SkyScan query 13:19:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 13:19:38 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 13:19:38 Check angles 13:19:38 SkyScan query 13:19:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 13:19:38 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 13:19:39 Check angles 13:19:39 SkyScan query 13:19:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 13:19:39 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 13:19:39 Check angles 13:19:39 SkyScan query 13:19:40 SkyScan query done: ret=0 az=112.995<-7533 ze=3.84<-11744 Statuses=0008 0009 13:19:40 Msec=5250 True Az=112.995 Ze=3.84 Az status=0008 Ze status=0009 13:19:40 Check angles 13:19:40 SkyScan query 13:19:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:19:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:19:41 Message to Master queued w/err=0: serial=89154 error=0 13:19:46 Received message from Master: op=Filter serial=89155 13:19:46 Color wheel filter change from 0 to 0 13:19:46 FLIGetFilterPos err=0 currentPosition=0 13:19:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:46 Filter is already there-color wheel unchanged 13:19:46 Received message from Master: op=Shutter serial=89156 13:19:46 Shutter LASER close 13:19:46 Received message from Camera: op=State serial=89158 13:19:46 GetSingleValue result=40 Value=cccccccc 13:19:46 SkyScan query 13:19:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:19:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:47 Parameters OK 13:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:47 Set A/D data flow result=40 13:19:47 Set A/D channel type result=40 13:19:47 Set A/D encoding result=40 13:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:47 Set channel filter=0.000000e+000 result=40 13:19:47 Config A/D Result=40 13:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:47 Get A/D filter: -9.255963e+061 result=40 13:19:47 Get A/D value=-858993460 result=40 13:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:47 Parameters OK 13:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:47 Set A/D data flow result=40 13:19:47 Set A/D channel type result=40 13:19:47 Set A/D encoding result=40 13:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:47 Set channel filter=0.000000e+000 result=40 13:19:47 Config A/D Result=40 13:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:47 Get A/D filter: -9.255963e+061 result=40 13:19:47 Get A/D value=-858993460 result=40 13:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:47 Aux= 13:19:47 Message to Camera, serial 89158 queued 13:20:23 Received message from Master: op=PointingHead serial=89171 13:20:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:20:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:20:24 Point started: ret=0 13:20:24 point_skyscan result=0 13:20:24 Check angles 13:20:24 SkyScan query 13:20:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:20:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:20:25 Message to Master queued w/err=0: serial=89171 error=0 13:20:30 Received message from Master: op=Filter serial=89172 13:20:30 Color wheel filter change from 0 to 0 13:20:30 FLIGetFilterPos err=0 currentPosition=0 13:20:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:30 Filter is already there-color wheel unchanged 13:20:30 Received message from Master: op=Shutter serial=89173 13:20:30 Shutter LASER close 13:20:30 Received message from Camera: op=State serial=89175 13:20:30 GetSingleValue result=40 Value=cccccccc 13:20:30 SkyScan query 13:20:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:20:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:31 Parameters OK 13:20:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:31 Set A/D data flow result=40 13:20:31 Set A/D channel type result=40 13:20:31 Set A/D encoding result=40 13:20:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:31 Set channel filter=0.000000e+000 result=40 13:20:31 Config A/D Result=40 13:20:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:31 Get A/D filter: -9.255963e+061 result=40 13:20:31 Get A/D value=-858993460 result=40 13:20:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:31 Parameters OK 13:20:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:31 Set A/D data flow result=40 13:20:31 Set A/D channel type result=40 13:20:31 Set A/D encoding result=40 13:20:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:31 Set channel filter=0.000000e+000 result=40 13:20:31 Config A/D Result=40 13:20:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:31 Get A/D filter: -9.255963e+061 result=40 13:20:31 Get A/D value=-858993460 result=40 13:20:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:31 Aux= 13:20:31 Message to Camera, serial 89175 queued 13:21:08 Received message from Master: op=PointingHead serial=89188 13:21:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:21:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:21:08 Point started: ret=0 13:21:08 point_skyscan result=0 13:21:09 Check angles 13:21:09 SkyScan query 13:21:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:21:09 Message to Master queued w/err=0: serial=89188 error=0 13:21:14 Received message from Master: op=Filter serial=89189 13:21:14 Color wheel filter change from 0 to 0 13:21:14 FLIGetFilterPos err=0 currentPosition=0 13:21:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:14 Filter is already there-color wheel unchanged 13:21:15 Received message from Master: op=Shutter serial=89190 13:21:15 Shutter LASER close 13:21:15 Received message from Camera: op=State serial=89192 13:21:15 GetSingleValue result=40 Value=cccccccc 13:21:15 SkyScan query 13:21:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:15 Parameters OK 13:21:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:15 Set A/D data flow result=40 13:21:15 Set A/D channel type result=40 13:21:15 Set A/D encoding result=40 13:21:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:15 Set channel filter=0.000000e+000 result=40 13:21:15 Config A/D Result=40 13:21:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:15 Get A/D filter: -9.255963e+061 result=40 13:21:15 Get A/D value=-858993460 result=40 13:21:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:15 Parameters OK 13:21:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:15 Set A/D data flow result=40 13:21:15 Set A/D channel type result=40 13:21:15 Set A/D encoding result=40 13:21:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:15 Set channel filter=0.000000e+000 result=40 13:21:15 Config A/D Result=40 13:21:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:15 Get A/D filter: -9.255963e+061 result=40 13:21:15 Get A/D value=-858993460 result=40 13:21:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:15 Aux= 13:21:15 Message to Camera, serial 89192 queued 13:21:52 Received message from Master: op=PointingHead serial=89205 13:21:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:21:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:21:52 Point started: ret=0 13:21:52 point_skyscan result=0 13:21:53 Check angles 13:21:53 SkyScan query 13:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:21:54 Message to Master queued w/err=0: serial=89205 error=0 13:21:59 Received message from Master: op=Filter serial=89206 13:21:59 Color wheel filter change from 0 to 0 13:21:59 FLIGetFilterPos err=0 currentPosition=0 13:21:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:59 Filter is already there-color wheel unchanged 13:21:59 Received message from Master: op=Shutter serial=89207 13:21:59 Shutter LASER close 13:21:59 Received message from Camera: op=State serial=89209 13:21:59 GetSingleValue result=40 Value=cccccccc 13:21:59 SkyScan query 13:21:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:59 Parameters OK 13:21:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:59 Set A/D data flow result=40 13:21:59 Set A/D channel type result=40 13:21:59 Set A/D encoding result=40 13:21:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:59 Set channel filter=0.000000e+000 result=40 13:21:59 Config A/D Result=40 13:21:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:59 Get A/D filter: -9.255963e+061 result=40 13:21:59 Get A/D value=-858993460 result=40 13:21:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:59 Parameters OK 13:21:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:59 Set A/D data flow result=40 13:21:59 Set A/D channel type result=40 13:21:59 Set A/D encoding result=40 13:21:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:59 Set channel filter=0.000000e+000 result=40 13:21:59 Config A/D Result=40 13:21:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:59 Get A/D filter: -9.255963e+061 result=40 13:21:59 Get A/D value=-858993460 result=40 13:21:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:59 Aux= 13:21:59 Message to Camera, serial 89209 queued 13:22:36 Received message from Master: op=PointingHead serial=89222 13:22:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:22:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:22:37 Point started: ret=0 13:22:37 point_skyscan result=0 13:22:37 Check angles 13:22:37 SkyScan query 13:22:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 13:22:38 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 13:22:38 Check angles 13:22:38 SkyScan query 13:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 13:22:39 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 13:22:39 Check angles 13:22:39 SkyScan query 13:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 13:22:39 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 13:22:40 Check angles 13:22:40 SkyScan query 13:22:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.295<-17753 Statuses=0008 0009 13:22:40 Msec=2250 True Az=112.995 Ze=-86.295 Az status=0008 Ze status=0009 13:22:40 Check angles 13:22:40 SkyScan query 13:22:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.235<-19149 Statuses=0008 0009 13:22:41 Msec=3000 True Az=112.995 Ze=-107.235 Az status=0008 Ze status=0009 13:22:41 Check angles 13:22:41 SkyScan query 13:22:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.175<-20545 Statuses=0008 0009 13:22:42 Msec=3750 True Az=112.995 Ze=-128.175 Az status=0008 Ze status=0009 13:22:42 Check angles 13:22:42 SkyScan query 13:22:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.16<-21944 Statuses=0008 0009 13:22:42 Msec=4500 True Az=112.995 Ze=-149.16 Az status=0008 Ze status=0009 13:22:43 Check angles 13:22:43 SkyScan query 13:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.1<-23340 Statuses=0008 0009 13:22:43 Msec=5250 True Az=112.995 Ze=-170.1 Az status=0008 Ze status=0009 13:22:43 Check angles 13:22:43 SkyScan query 13:22:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:22:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:22:44 Message to Master queued w/err=0: serial=89222 error=0 13:22:49 Received message from Master: op=Filter serial=89223 13:22:49 Color wheel filter change from 0 to 0 13:22:49 FLIGetFilterPos err=0 currentPosition=0 13:22:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:49 Filter is already there-color wheel unchanged 13:22:49 Received message from Master: op=Shutter serial=89224 13:22:49 Shutter LASER open 13:22:49 Received message from Camera: op=State serial=89226 13:22:49 GetSingleValue result=40 Value=cccccccc 13:22:49 SkyScan query 13:22:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:22:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:50 Parameters OK 13:22:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:50 Set A/D data flow result=40 13:22:50 Set A/D channel type result=40 13:22:50 Set A/D encoding result=40 13:22:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:50 Set channel filter=0.000000e+000 result=40 13:22:50 Config A/D Result=40 13:22:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:50 Get A/D filter: -9.255963e+061 result=40 13:22:50 Get A/D value=-858993460 result=40 13:22:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:50 Parameters OK 13:22:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:50 Set A/D data flow result=40 13:22:50 Set A/D channel type result=40 13:22:50 Set A/D encoding result=40 13:22:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:50 Set channel filter=0.000000e+000 result=40 13:22:50 Config A/D Result=40 13:22:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:50 Get A/D filter: -9.255963e+061 result=40 13:22:50 Get A/D value=-858993460 result=40 13:22:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:50 Aux= 13:22:50 Message to Camera, serial 89226 queued 13:22:58 Received message from Master: op=Shutter serial=89236 13:22:58 Shutter LASER close 13:22:59 Received message from Master: op=PointingHead serial=89240 13:22:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:22:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:22:59 Point started: ret=0 13:22:59 point_skyscan result=0 13:23:00 Check angles 13:23:00 SkyScan query 13:23:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 13:23:01 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 13:23:01 Check angles 13:23:01 SkyScan query 13:23:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 13:23:01 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 13:23:02 Check angles 13:23:02 SkyScan query 13:23:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 13:23:02 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 13:23:02 Check angles 13:23:02 SkyScan query 13:23:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.575<-17305 Statuses=0008 0009 13:23:03 Msec=2250 True Az=112.995 Ze=-79.575 Az status=0008 Ze status=0009 13:23:03 Check angles 13:23:03 SkyScan query 13:23:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.155<-15877 Statuses=0008 0009 13:23:04 Msec=3000 True Az=112.995 Ze=-58.155 Az status=0008 Ze status=0009 13:23:04 Check angles 13:23:04 SkyScan query 13:23:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.795<-14453 Statuses=0008 0009 13:23:04 Msec=3750 True Az=112.995 Ze=-36.795 Az status=0008 Ze status=0009 13:23:05 Check angles 13:23:05 SkyScan query 13:23:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.825<-13055 Statuses=0008 0009 13:23:05 Msec=4500 True Az=112.995 Ze=-15.825 Az status=0008 Ze status=0009 13:23:05 Check angles 13:23:05 SkyScan query 13:23:06 SkyScan query done: ret=0 az=112.995<-7533 ze=4.89<-11674 Statuses=0008 0009 13:23:06 Msec=5250 True Az=112.995 Ze=4.89 Az status=0008 Ze status=0009 13:23:06 Check angles 13:23:06 SkyScan query 13:23:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:23:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:23:07 Message to Master queued w/err=0: serial=89240 error=0 13:23:12 Received message from Master: op=Filter serial=89241 13:23:12 Color wheel filter change from 0 to 0 13:23:12 FLIGetFilterPos err=0 currentPosition=0 13:23:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:12 Filter is already there-color wheel unchanged 13:23:12 Received message from Master: op=Shutter serial=89242 13:23:12 Shutter LASER close 13:23:12 Received message from Camera: op=State serial=89244 13:23:12 GetSingleValue result=40 Value=cccccccc 13:23:12 SkyScan query 13:23:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:23:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:13 Parameters OK 13:23:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:13 Set A/D data flow result=40 13:23:13 Set A/D channel type result=40 13:23:13 Set A/D encoding result=40 13:23:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:13 Set channel filter=0.000000e+000 result=40 13:23:13 Config A/D Result=40 13:23:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:13 Get A/D filter: -9.255963e+061 result=40 13:23:13 Get A/D value=-858993460 result=40 13:23:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:13 Parameters OK 13:23:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:13 Set A/D data flow result=40 13:23:13 Set A/D channel type result=40 13:23:13 Set A/D encoding result=40 13:23:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:13 Set channel filter=0.000000e+000 result=40 13:23:13 Config A/D Result=40 13:23:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:13 Get A/D filter: -9.255963e+061 result=40 13:23:13 Get A/D value=-858993460 result=40 13:23:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:13 Aux= 13:23:13 Message to Camera, serial 89244 queued 13:23:49 Received message from Master: op=PointingHead serial=89257 13:23:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:23:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:23:50 Point started: ret=0 13:23:50 point_skyscan result=0 [UTC 2019-3-3 13:23:50] 13:23:51 Check angles 13:23:51 SkyScan query 13:23:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:23:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:23:51 Message to Master queued w/err=0: serial=89257 error=0 13:23:56 Received message from Master: op=Filter serial=89258 13:23:56 Color wheel filter change from 0 to 0 13:23:56 FLIGetFilterPos err=0 currentPosition=0 13:23:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:56 Filter is already there-color wheel unchanged 13:23:56 Received message from Master: op=Shutter serial=89259 13:23:56 Shutter LASER close 13:23:56 Received message from Camera: op=State serial=89261 13:23:56 GetSingleValue result=40 Value=cccccccc 13:23:56 SkyScan query 13:23:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:23:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:57 Parameters OK 13:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:57 Set A/D data flow result=40 13:23:57 Set A/D channel type result=40 13:23:57 Set A/D encoding result=40 13:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:57 Set channel filter=0.000000e+000 result=40 13:23:57 Config A/D Result=40 13:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:57 Get A/D filter: -9.255963e+061 result=40 13:23:57 Get A/D value=-858993460 result=40 13:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:57 Parameters OK 13:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:57 Set A/D data flow result=40 13:23:57 Set A/D channel type result=40 13:23:57 Set A/D encoding result=40 13:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:57 Set channel filter=0.000000e+000 result=40 13:23:57 Config A/D Result=40 13:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:57 Get A/D filter: -9.255963e+061 result=40 13:23:57 Get A/D value=-858993460 result=40 13:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:57 Aux= 13:23:57 Message to Camera, serial 89261 queued 13:24:33 Received message from Master: op=PointingHead serial=89273 13:24:33 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:24:33 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:24:33 Point started: ret=0 13:24:33 point_skyscan result=0 13:24:34 Check angles 13:24:34 SkyScan query 13:24:34 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 13:24:34 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 13:24:35 Check angles 13:24:35 SkyScan query 13:24:35 SkyScan query done: ret=0 az=153.42<-10228 ze=-6.495<-12433 Statuses=0009 0008 13:24:35 Msec=750 True Az=153.42 Ze=-6.495 Az status=0009 Ze status=0008 13:24:35 Check angles 13:24:35 SkyScan query 13:24:36 SkyScan query done: ret=0 az=170.85<-11390 ze=-6.495<-12433 Statuses=0009 0008 13:24:36 Msec=1500 True Az=170.85 Ze=-6.495 Az status=0009 Ze status=0008 13:24:36 Check angles 13:24:36 SkyScan query 13:24:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:24:37 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:24:37 Message to Master queued w/err=0: serial=89273 error=0 13:24:42 Received message from Master: op=Filter serial=89274 13:24:42 Color wheel filter change from 0 to 0 13:24:42 FLIGetFilterPos err=0 currentPosition=0 13:24:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:42 Filter is already there-color wheel unchanged 13:24:42 Received message from Master: op=Shutter serial=89275 13:24:42 Shutter LASER close 13:24:42 Received message from Camera: op=State serial=89277 13:24:42 GetSingleValue result=40 Value=cccccccc 13:24:42 SkyScan query 13:24:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:24:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:42 Parameters OK 13:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:42 Set A/D data flow result=40 13:24:42 Set A/D channel type result=40 13:24:42 Set A/D encoding result=40 13:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:42 Set channel filter=0.000000e+000 result=40 13:24:42 Config A/D Result=40 13:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:42 Get A/D filter: -9.255963e+061 result=40 13:24:42 Get A/D value=-858993460 result=40 13:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:42 Parameters OK 13:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:42 Set A/D data flow result=40 13:24:42 Set A/D channel type result=40 13:24:42 Set A/D encoding result=40 13:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:42 Set channel filter=0.000000e+000 result=40 13:24:42 Config A/D Result=40 13:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:42 Get A/D filter: -9.255963e+061 result=40 13:24:42 Get A/D value=-858993460 result=40 13:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:42 Aux= 13:24:42 Message to Camera, serial 89277 queued 13:25:19 Received message from Master: op=PointingHead serial=89290 13:25:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:25:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:25:20 Point started: ret=0 13:25:20 point_skyscan result=0 13:25:20 Check angles 13:25:20 SkyScan query 13:25:21 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 13:25:21 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 13:25:21 Check angles 13:25:21 SkyScan query 13:25:22 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 13:25:22 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 13:25:22 Check angles 13:25:22 SkyScan query 13:25:22 SkyScan query done: ret=0 az=117.9<-7860 ze=6.495<-11567 Statuses=0009 0008 13:25:22 Msec=1500 True Az=117.9 Ze=6.495 Az status=0009 Ze status=0008 13:25:23 Check angles 13:25:23 SkyScan query 13:25:23 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 13:25:23 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 13:25:23 Message to Master queued w/err=0: serial=89290 error=0 13:25:28 Received message from Master: op=Filter serial=89291 13:25:28 Color wheel filter change from 0 to 0 13:25:28 FLIGetFilterPos err=0 currentPosition=0 13:25:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:28 Filter is already there-color wheel unchanged 13:25:28 Received message from Master: op=Shutter serial=89292 13:25:28 Shutter LASER close 13:25:28 Received message from Camera: op=State serial=89294 13:25:28 GetSingleValue result=40 Value=cccccccc 13:25:28 SkyScan query 13:25:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:25:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:29 Parameters OK 13:25:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:29 Set A/D data flow result=40 13:25:29 Set A/D channel type result=40 13:25:29 Set A/D encoding result=40 13:25:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:29 Set channel filter=0.000000e+000 result=40 13:25:29 Config A/D Result=40 13:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:29 Get A/D filter: -9.255963e+061 result=40 13:25:29 Get A/D value=-858993460 result=40 13:25:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:29 Parameters OK 13:25:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:29 Set A/D data flow result=40 13:25:29 Set A/D channel type result=40 13:25:29 Set A/D encoding result=40 13:25:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:29 Set channel filter=0.000000e+000 result=40 13:25:29 Config A/D Result=40 13:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:29 Get A/D filter: -9.255963e+061 result=40 13:25:29 Get A/D value=-858993460 result=40 13:25:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:29 Aux= 13:25:29 Message to Camera, serial 89294 queued 13:26:06 Received message from Master: op=PointingHead serial=89307 13:26:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:26:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:26:06 Point started: ret=0 13:26:06 point_skyscan result=0 13:26:07 Check angles 13:26:07 SkyScan query 13:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 13:26:08 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 13:26:08 Check angles 13:26:08 SkyScan query 13:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.115<-14941 Statuses=0008 0009 13:26:08 Msec=750 True Az=112.995 Ze=-44.115 Az status=0008 Ze status=0009 13:26:08 Check angles 13:26:08 SkyScan query 13:26:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 13:26:09 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 13:26:09 Check angles 13:26:09 SkyScan query 13:26:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 13:26:10 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 13:26:10 Check angles 13:26:10 SkyScan query 13:26:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 13:26:11 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 13:26:11 Check angles 13:26:11 SkyScan query 13:26:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.76<-20584 Statuses=0008 0009 13:26:11 Msec=3750 True Az=112.995 Ze=-128.76 Az status=0008 Ze status=0009 13:26:11 Check angles 13:26:11 SkyScan query 13:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.73<-21982 Statuses=0008 0009 13:26:12 Msec=4500 True Az=112.995 Ze=-149.73 Az status=0008 Ze status=0009 13:26:12 Check angles 13:26:12 SkyScan query 13:26:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.655<-23377 Statuses=0008 0009 13:26:13 Msec=5250 True Az=112.995 Ze=-170.655 Az status=0008 Ze status=0009 13:26:13 Check angles 13:26:13 SkyScan query 13:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:26:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:26:14 Message to Master queued w/err=0: serial=89307 error=0 13:26:19 Received message from Master: op=Filter serial=89308 13:26:19 Color wheel filter change from 0 to 0 13:26:19 FLIGetFilterPos err=0 currentPosition=0 13:26:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:19 Filter is already there-color wheel unchanged 13:26:19 Received message from Master: op=Shutter serial=89309 13:26:19 Shutter LASER open 13:26:19 Received message from Camera: op=State serial=89311 13:26:19 GetSingleValue result=40 Value=cccccccc 13:26:19 SkyScan query 13:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:26:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:19 Parameters OK 13:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:19 Set A/D data flow result=40 13:26:19 Set A/D channel type result=40 13:26:19 Set A/D encoding result=40 13:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:19 Set channel filter=0.000000e+000 result=40 13:26:19 Config A/D Result=40 13:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:19 Get A/D filter: -9.255963e+061 result=40 13:26:19 Get A/D value=-858993460 result=40 13:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:19 Parameters OK 13:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:19 Set A/D data flow result=40 13:26:19 Set A/D channel type result=40 13:26:19 Set A/D encoding result=40 13:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:19 Set channel filter=0.000000e+000 result=40 13:26:19 Config A/D Result=40 13:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:19 Get A/D filter: -9.255963e+061 result=40 13:26:19 Get A/D value=-858993460 result=40 13:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:19 Aux= 13:26:19 Message to Camera, serial 89311 queued 13:26:28 Received message from Master: op=Shutter serial=89321 13:26:28 Shutter LASER close 13:26:28 Received message from Master: op=PointingHead serial=89325 13:26:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:26:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:26:29 Point started: ret=0 13:26:29 point_skyscan result=0 13:26:29 Check angles 13:26:29 SkyScan query 13:26:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 13:26:30 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 13:26:30 Check angles 13:26:30 SkyScan query 13:26:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 13:26:31 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 13:26:31 Check angles 13:26:31 SkyScan query 13:26:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.695<-18713 Statuses=0008 0009 13:26:32 Msec=1500 True Az=112.995 Ze=-100.695 Az status=0008 Ze status=0009 13:26:32 Check angles 13:26:32 SkyScan query 13:26:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.725<-17315 Statuses=0008 0009 13:26:32 Msec=2250 True Az=112.995 Ze=-79.725 Az status=0008 Ze status=0009 13:26:32 Check angles 13:26:32 SkyScan query 13:26:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.785<-15919 Statuses=0008 0009 13:26:33 Msec=3000 True Az=112.995 Ze=-58.785 Az status=0008 Ze status=0009 13:26:33 Check angles 13:26:33 SkyScan query 13:26:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.815<-14521 Statuses=0008 0009 13:26:34 Msec=3750 True Az=112.995 Ze=-37.815 Az status=0008 Ze status=0009 13:26:34 Check angles 13:26:34 SkyScan query 13:26:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.86<-13124 Statuses=0008 0009 13:26:35 Msec=4500 True Az=112.995 Ze=-16.86 Az status=0008 Ze status=0009 13:26:35 Check angles 13:26:35 SkyScan query 13:26:35 SkyScan query done: ret=0 az=112.995<-7533 ze=4.08<-11728 Statuses=0008 0009 13:26:35 Msec=5250 True Az=112.995 Ze=4.08 Az status=0008 Ze status=0009 13:26:35 Check angles 13:26:35 SkyScan query 13:26:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:26:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:26:36 Message to Master queued w/err=0: serial=89325 error=0 13:26:41 Received message from Master: op=Filter serial=89326 13:26:41 Color wheel filter change from 0 to 0 13:26:41 FLIGetFilterPos err=0 currentPosition=0 13:26:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:41 Filter is already there-color wheel unchanged 13:26:41 Received message from Master: op=Shutter serial=89327 13:26:41 Shutter LASER close 13:26:41 Received message from Camera: op=State serial=89329 13:26:41 GetSingleValue result=40 Value=cccccccc 13:26:41 SkyScan query 13:26:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:26:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:42 Parameters OK 13:26:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:42 Set A/D data flow result=40 13:26:42 Set A/D channel type result=40 13:26:42 Set A/D encoding result=40 13:26:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:42 Set channel filter=0.000000e+000 result=40 13:26:42 Config A/D Result=40 13:26:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:42 Get A/D filter: -9.255963e+061 result=40 13:26:42 Get A/D value=-858993460 result=40 13:26:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:42 Parameters OK 13:26:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:42 Set A/D data flow result=40 13:26:42 Set A/D channel type result=40 13:26:42 Set A/D encoding result=40 13:26:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:42 Set channel filter=0.000000e+000 result=40 13:26:42 Config A/D Result=40 13:26:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:42 Get A/D filter: -9.255963e+061 result=40 13:26:42 Get A/D value=-858993460 result=40 13:26:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:42 Aux= 13:26:42 Message to Camera, serial 89329 queued 13:27:19 Received message from Master: op=PointingHead serial=89342 13:27:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:27:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:27:19 Point started: ret=0 13:27:19 point_skyscan result=0 13:27:20 Check angles 13:27:20 SkyScan query 13:27:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:27:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:27:20 Message to Master queued w/err=0: serial=89342 error=0 13:27:25 Received message from Master: op=Filter serial=89343 13:27:25 Color wheel filter change from 0 to 0 13:27:25 FLIGetFilterPos err=0 currentPosition=0 13:27:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:25 Filter is already there-color wheel unchanged 13:27:26 Received message from Master: op=Shutter serial=89344 13:27:26 Shutter LASER close 13:27:26 Received message from Camera: op=State serial=89346 13:27:26 GetSingleValue result=40 Value=cccccccc 13:27:26 SkyScan query 13:27:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:27:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:26 Parameters OK 13:27:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:26 Set A/D data flow result=40 13:27:26 Set A/D channel type result=40 13:27:26 Set A/D encoding result=40 13:27:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:26 Set channel filter=0.000000e+000 result=40 13:27:26 Config A/D Result=40 13:27:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:26 Get A/D filter: -9.255963e+061 result=40 13:27:26 Get A/D value=-858993460 result=40 13:27:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:26 Parameters OK 13:27:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:26 Set A/D data flow result=40 13:27:26 Set A/D channel type result=40 13:27:26 Set A/D encoding result=40 13:27:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:26 Set channel filter=0.000000e+000 result=40 13:27:26 Config A/D Result=40 13:27:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:26 Get A/D filter: -9.255963e+061 result=40 13:27:26 Get A/D value=-858993460 result=40 13:27:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:26 Aux= 13:27:26 Message to Camera, serial 89346 queued 13:28:03 Received message from Master: op=PointingHead serial=89359 13:28:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:28:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:28:03 Point started: ret=0 13:28:03 point_skyscan result=0 13:28:04 Check angles 13:28:04 SkyScan query 13:28:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:28:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:28:05 Message to Master queued w/err=0: serial=89359 error=0 13:28:10 Received message from Master: op=Filter serial=89360 13:28:10 Color wheel filter change from 0 to 0 13:28:10 FLIGetFilterPos err=0 currentPosition=0 13:28:10 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:10 Filter is already there-color wheel unchanged 13:28:10 Received message from Master: op=Shutter serial=89361 13:28:10 Shutter LASER close 13:28:10 Received message from Camera: op=State serial=89363 13:28:10 GetSingleValue result=40 Value=cccccccc 13:28:10 SkyScan query 13:28:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:28:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:11 Parameters OK 13:28:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:11 Set A/D data flow result=40 13:28:11 Set A/D channel type result=40 13:28:11 Set A/D encoding result=40 13:28:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:11 Set channel filter=0.000000e+000 result=40 13:28:11 Config A/D Result=40 13:28:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:11 Get A/D filter: -9.255963e+061 result=40 13:28:11 Get A/D value=-858993460 result=40 13:28:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:11 Parameters OK 13:28:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:11 Set A/D data flow result=40 13:28:11 Set A/D channel type result=40 13:28:11 Set A/D encoding result=40 13:28:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:11 Set channel filter=0.000000e+000 result=40 13:28:11 Config A/D Result=40 13:28:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:11 Get A/D filter: -9.255963e+061 result=40 13:28:11 Get A/D value=-858993460 result=40 13:28:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:11 Aux= 13:28:11 Message to Camera, serial 89363 queued 13:28:47 Received message from Master: op=PointingHead serial=89376 13:28:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:28:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:28:48 Point started: ret=0 13:28:48 point_skyscan result=0 13:28:49 Check angles 13:28:49 SkyScan query 13:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:28:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:28:49 Message to Master queued w/err=0: serial=89376 error=0 13:28:54 Received message from Master: op=Filter serial=89377 13:28:54 Color wheel filter change from 0 to 0 13:28:54 FLIGetFilterPos err=0 currentPosition=0 13:28:54 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:54 Filter is already there-color wheel unchanged 13:28:54 Received message from Master: op=Shutter serial=89378 13:28:54 Shutter LASER close 13:28:54 Received message from Camera: op=State serial=89380 13:28:54 GetSingleValue result=40 Value=cccccccc 13:28:54 SkyScan query 13:28:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:28:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:55 Parameters OK 13:28:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:55 Set A/D data flow result=40 13:28:55 Set A/D channel type result=40 13:28:55 Set A/D encoding result=40 13:28:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:55 Set channel filter=0.000000e+000 result=40 13:28:55 Config A/D Result=40 13:28:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:55 Get A/D filter: -9.255963e+061 result=40 13:28:55 Get A/D value=-858993460 result=40 13:28:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:55 Parameters OK 13:28:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:55 Set A/D data flow result=40 13:28:55 Set A/D channel type result=40 13:28:55 Set A/D encoding result=40 13:28:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:55 Set channel filter=0.000000e+000 result=40 13:28:55 Config A/D Result=40 13:28:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:55 Get A/D filter: -9.255963e+061 result=40 13:28:55 Get A/D value=-858993460 result=40 13:28:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:55 Aux= 13:28:55 Message to Camera, serial 89380 queued 13:29:31 Received message from Master: op=PointingHead serial=89392 13:29:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:29:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:29:31 Point started: ret=0 13:29:31 point_skyscan result=0 13:29:32 Check angles 13:29:32 SkyScan query 13:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.55<-13570 Statuses=0008 0009 13:29:33 Msec=0 True Az=112.995 Ze=-23.55 Az status=0008 Ze status=0009 13:29:33 Check angles 13:29:33 SkyScan query 13:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 13:29:33 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 13:29:33 Check angles 13:29:33 SkyScan query 13:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 13:29:34 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 13:29:34 Check angles 13:29:34 SkyScan query 13:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.85<-17790 Statuses=0008 0009 13:29:35 Msec=2250 True Az=112.995 Ze=-86.85 Az status=0008 Ze status=0009 13:29:35 Check angles 13:29:35 SkyScan query 13:29:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.805<-19187 Statuses=0008 0009 13:29:36 Msec=3000 True Az=112.995 Ze=-107.805 Az status=0008 Ze status=0009 13:29:36 Check angles 13:29:36 SkyScan query 13:29:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.195<-20613 Statuses=0008 0009 13:29:36 Msec=3750 True Az=112.995 Ze=-129.195 Az status=0008 Ze status=0009 13:29:36 Check angles 13:29:36 SkyScan query 13:29:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.15<-22010 Statuses=0008 0009 13:29:37 Msec=4500 True Az=112.995 Ze=-150.15 Az status=0008 Ze status=0009 13:29:37 Check angles 13:29:37 SkyScan query 13:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0008 0009 13:29:38 Msec=5250 True Az=112.995 Ze=-170.985 Az status=0008 Ze status=0009 13:29:38 Check angles 13:29:38 SkyScan query 13:29:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:29:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:29:39 Message to Master queued w/err=0: serial=89392 error=0 13:29:44 Received message from Master: op=Filter serial=89393 13:29:44 Color wheel filter change from 0 to 0 13:29:44 FLIGetFilterPos err=0 currentPosition=0 13:29:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:44 Filter is already there-color wheel unchanged 13:29:44 Received message from Master: op=Shutter serial=89394 13:29:44 Shutter LASER open 13:29:44 Received message from Camera: op=State serial=89396 13:29:44 GetSingleValue result=40 Value=cccccccc 13:29:44 SkyScan query 13:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:29:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:44 Parameters OK 13:29:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:44 Set A/D data flow result=40 13:29:44 Set A/D channel type result=40 13:29:44 Set A/D encoding result=40 13:29:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:44 Set channel filter=0.000000e+000 result=40 13:29:44 Config A/D Result=40 13:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:44 Get A/D filter: -9.255963e+061 result=40 13:29:44 Get A/D value=-858993460 result=40 13:29:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:44 Parameters OK 13:29:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:44 Set A/D data flow result=40 13:29:44 Set A/D channel type result=40 13:29:44 Set A/D encoding result=40 13:29:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:44 Set channel filter=0.000000e+000 result=40 13:29:44 Config A/D Result=40 13:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:44 Get A/D filter: -9.255963e+061 result=40 13:29:44 Get A/D value=-858993460 result=40 13:29:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:44 Aux= 13:29:44 Message to Camera, serial 89396 queued 13:29:53 Received message from Master: op=Shutter serial=89406 13:29:53 Shutter LASER close 13:29:53 Received message from Master: op=PointingHead serial=89410 13:29:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:29:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:29:54 Point started: ret=0 13:29:54 point_skyscan result=0 13:29:55 Check angles 13:29:55 SkyScan query 13:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 13:29:55 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 13:29:55 Check angles 13:29:55 SkyScan query 13:29:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 13:29:56 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 13:29:56 Check angles 13:29:56 SkyScan query 13:29:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.8<-18720 Statuses=0008 0009 13:29:57 Msec=1500 True Az=112.995 Ze=-100.8 Az status=0008 Ze status=0009 13:29:57 Check angles 13:29:57 SkyScan query 13:29:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 13:29:57 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 13:29:58 Check angles 13:29:58 SkyScan query 13:29:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.905<-15927 Statuses=0008 0009 13:29:58 Msec=3000 True Az=112.995 Ze=-58.905 Az status=0008 Ze status=0009 13:29:58 Check angles 13:29:58 SkyScan query 13:29:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.92<-14528 Statuses=0008 0009 13:29:59 Msec=3750 True Az=112.995 Ze=-37.92 Az status=0008 Ze status=0009 13:29:59 Check angles 13:29:59 SkyScan query 13:30:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.98<-13132 Statuses=0008 0009 13:30:00 Msec=4500 True Az=112.995 Ze=-16.98 Az status=0008 Ze status=0009 13:30:00 Check angles 13:30:00 SkyScan query 13:30:00 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 13:30:00 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 13:30:01 Check angles 13:30:01 SkyScan query 13:30:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:30:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:30:01 Message to Master queued w/err=0: serial=89410 error=0 13:30:06 Received message from Master: op=Filter serial=89411 13:30:06 Color wheel filter change from 0 to 0 13:30:06 FLIGetFilterPos err=0 currentPosition=0 13:30:06 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:06 Filter is already there-color wheel unchanged 13:30:06 Received message from Master: op=Shutter serial=89412 13:30:06 Shutter LASER close 13:30:07 Received message from Camera: op=State serial=89414 13:30:07 GetSingleValue result=40 Value=cccccccc 13:30:07 SkyScan query 13:30:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:30:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:07 Parameters OK 13:30:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:07 Set A/D data flow result=40 13:30:07 Set A/D channel type result=40 13:30:07 Set A/D encoding result=40 13:30:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:07 Set channel filter=0.000000e+000 result=40 13:30:07 Config A/D Result=40 13:30:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:07 Get A/D filter: -9.255963e+061 result=40 13:30:07 Get A/D value=-858993460 result=40 13:30:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:07 Parameters OK 13:30:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:07 Set A/D data flow result=40 13:30:07 Set A/D channel type result=40 13:30:07 Set A/D encoding result=40 13:30:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:07 Set channel filter=0.000000e+000 result=40 13:30:07 Config A/D Result=40 13:30:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:07 Get A/D filter: -9.255963e+061 result=40 13:30:07 Get A/D value=-858993460 result=40 13:30:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:07 Aux= 13:30:07 Message to Camera, serial 89414 queued 13:30:44 Received message from Master: op=PointingHead serial=89427 13:30:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:30:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:30:44 Point started: ret=0 13:30:44 point_skyscan result=0 13:30:45 Check angles 13:30:45 SkyScan query 13:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:30:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:30:46 Message to Master queued w/err=0: serial=89427 error=0 13:30:51 Received message from Master: op=Filter serial=89428 13:30:51 Color wheel filter change from 0 to 0 13:30:51 FLIGetFilterPos err=0 currentPosition=0 13:30:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:51 Filter is already there-color wheel unchanged 13:30:51 Received message from Master: op=Shutter serial=89429 13:30:51 Shutter LASER close 13:30:51 Received message from Camera: op=State serial=89431 13:30:51 GetSingleValue result=40 Value=cccccccc 13:30:51 SkyScan query 13:30:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:30:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:51 Parameters OK 13:30:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:51 Set A/D data flow result=40 13:30:51 Set A/D channel type result=40 13:30:51 Set A/D encoding result=40 13:30:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:51 Set channel filter=0.000000e+000 result=40 13:30:51 Config A/D Result=40 13:30:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:51 Get A/D filter: -9.255963e+061 result=40 13:30:51 Get A/D value=-858993460 result=40 13:30:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:51 Parameters OK 13:30:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:51 Set A/D data flow result=40 13:30:51 Set A/D channel type result=40 13:30:51 Set A/D encoding result=40 13:30:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:51 Set channel filter=0.000000e+000 result=40 13:30:51 Config A/D Result=40 13:30:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:51 Get A/D filter: -9.255963e+061 result=40 13:30:51 Get A/D value=-858993460 result=40 13:30:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:51 Aux= 13:30:51 Message to Camera, serial 89431 queued 13:31:28 Received message from Master: op=PointingHead serial=89444 13:31:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:31:28 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:31:29 Point started: ret=0 13:31:29 point_skyscan result=0 13:31:29 Check angles 13:31:29 SkyScan query 13:31:30 SkyScan query done: ret=0 az=136.395<-9093 ze=-6.51<-12434 Statuses=0009 0008 13:31:30 Msec=0 True Az=136.395 Ze=-6.51 Az status=0009 Ze status=0008 13:31:30 Check angles 13:31:30 SkyScan query 13:31:31 SkyScan query done: ret=0 az=154.215<-10281 ze=-6.495<-12433 Statuses=0009 0008 13:31:31 Msec=750 True Az=154.215 Ze=-6.495 Az status=0009 Ze status=0008 13:31:31 Check angles 13:31:31 SkyScan query 13:31:31 SkyScan query done: ret=0 az=171.645<-11443 ze=-6.495<-12433 Statuses=0009 0008 13:31:31 Msec=1500 True Az=171.645 Ze=-6.495 Az status=0009 Ze status=0008 13:31:32 Check angles 13:31:32 SkyScan query 13:31:32 SkyScan query done: ret=0 az=175.98<-11732 ze=-6.495<-12433 Statuses=0008 0008 13:31:32 Msec=2250 True Az=175.98 Ze=-6.495 Az status=0008 Ze status=0008 13:31:32 Message to Master queued w/err=0: serial=89444 error=0 13:31:37 Received message from Master: op=Filter serial=89445 13:31:37 Color wheel filter change from 0 to 0 13:31:37 FLIGetFilterPos err=0 currentPosition=0 13:31:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:37 Filter is already there-color wheel unchanged 13:31:37 Received message from Master: op=Shutter serial=89446 13:31:37 Shutter LASER close 13:31:37 Received message from Camera: op=State serial=89448 13:31:37 GetSingleValue result=40 Value=cccccccc 13:31:37 SkyScan query 13:31:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:31:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:38 Parameters OK 13:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:38 Set A/D data flow result=40 13:31:38 Set A/D channel type result=40 13:31:38 Set A/D encoding result=40 13:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:38 Set channel filter=0.000000e+000 result=40 13:31:38 Config A/D Result=40 13:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:38 Get A/D filter: -9.255963e+061 result=40 13:31:38 Get A/D value=-858993460 result=40 13:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:38 Parameters OK 13:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:38 Set A/D data flow result=40 13:31:38 Set A/D channel type result=40 13:31:38 Set A/D encoding result=40 13:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:38 Set channel filter=0.000000e+000 result=40 13:31:38 Config A/D Result=40 13:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:38 Get A/D filter: -9.255963e+061 result=40 13:31:38 Get A/D value=-858993460 result=40 13:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:38 Aux= 13:31:38 Message to Camera, serial 89448 queued 13:32:15 Received message from Master: op=PointingHead serial=89461 13:32:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:32:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:32:15 Point started: ret=0 13:32:15 point_skyscan result=0 13:32:16 Check angles 13:32:16 SkyScan query 13:32:16 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 13:32:16 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 13:32:17 Check angles 13:32:17 SkyScan query 13:32:17 SkyScan query done: ret=0 az=135.03<-9002 ze=6.495<-11567 Statuses=0009 0008 13:32:17 Msec=750 True Az=135.03 Ze=6.495 Az status=0009 Ze status=0008 13:32:17 Check angles 13:32:17 SkyScan query 13:32:18 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 13:32:18 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 13:32:18 Check angles 13:32:18 SkyScan query 13:32:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:32:19 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:32:19 Message to Master queued w/err=0: serial=89461 error=0 13:32:24 Received message from Master: op=Filter serial=89462 13:32:24 Color wheel filter change from 0 to 0 13:32:24 FLIGetFilterPos err=0 currentPosition=0 13:32:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:24 Filter is already there-color wheel unchanged 13:32:24 Received message from Master: op=Shutter serial=89463 13:32:24 Shutter LASER close 13:32:24 Received message from Camera: op=State serial=89465 13:32:24 GetSingleValue result=40 Value=cccccccc 13:32:24 SkyScan query 13:32:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:32:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:25 Parameters OK 13:32:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:25 Set A/D data flow result=40 13:32:25 Set A/D channel type result=40 13:32:25 Set A/D encoding result=40 13:32:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:25 Set channel filter=0.000000e+000 result=40 13:32:25 Config A/D Result=40 13:32:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:25 Get A/D filter: -9.255963e+061 result=40 13:32:25 Get A/D value=-858993460 result=40 13:32:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:25 Parameters OK 13:32:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:25 Set A/D data flow result=40 13:32:25 Set A/D channel type result=40 13:32:25 Set A/D encoding result=40 13:32:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:25 Set channel filter=0.000000e+000 result=40 13:32:25 Config A/D Result=40 13:32:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:25 Get A/D filter: -9.255963e+061 result=40 13:32:25 Get A/D value=-858993460 result=40 13:32:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:25 Aux= 13:32:25 Message to Camera, serial 89465 queued 13:33:01 Received message from Master: op=PointingHead serial=89478 13:33:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:33:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:33:02 Point started: ret=0 13:33:02 point_skyscan result=0 13:33:03 Check angles 13:33:03 SkyScan query 13:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 13:33:03 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 13:33:03 Check angles 13:33:03 SkyScan query 13:33:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.06<-15004 Statuses=0008 0009 13:33:04 Msec=750 True Az=112.995 Ze=-45.06 Az status=0008 Ze status=0009 13:33:04 Check angles 13:33:04 SkyScan query 13:33:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.015<-16401 Statuses=0008 0009 13:33:05 Msec=1500 True Az=112.995 Ze=-66.015 Az status=0008 Ze status=0009 13:33:05 Check angles 13:33:05 SkyScan query 13:33:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.97<-17798 Statuses=0008 0009 13:33:05 Msec=2250 True Az=112.995 Ze=-86.97 Az status=0008 Ze status=0009 13:33:06 Check angles 13:33:06 SkyScan query 13:33:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.925<-19195 Statuses=0008 0009 13:33:06 Msec=3000 True Az=112.995 Ze=-107.925 Az status=0008 Ze status=0009 13:33:06 Check angles 13:33:06 SkyScan query 13:33:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.865<-20591 Statuses=0008 0009 13:33:07 Msec=3750 True Az=112.995 Ze=-128.865 Az status=0008 Ze status=0009 13:33:07 Check angles 13:33:07 SkyScan query 13:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.255<-22017 Statuses=0008 0009 13:33:08 Msec=4500 True Az=112.995 Ze=-150.255 Az status=0008 Ze status=0009 13:33:08 Check angles 13:33:08 SkyScan query 13:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 13:33:08 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 13:33:09 Check angles 13:33:09 SkyScan query 13:33:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:33:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:33:09 Message to Master queued w/err=0: serial=89478 error=0 13:33:14 Received message from Master: op=Filter serial=89479 13:33:14 Color wheel filter change from 0 to 0 13:33:14 FLIGetFilterPos err=0 currentPosition=0 13:33:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:14 Filter is already there-color wheel unchanged 13:33:14 Received message from Master: op=Shutter serial=89480 13:33:14 Shutter LASER open 13:33:14 Received message from Camera: op=State serial=89482 13:33:14 GetSingleValue result=40 Value=cccccccc 13:33:14 SkyScan query 13:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:33:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:15 Parameters OK 13:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:15 Set A/D data flow result=40 13:33:15 Set A/D channel type result=40 13:33:15 Set A/D encoding result=40 13:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:15 Set channel filter=0.000000e+000 result=40 13:33:15 Config A/D Result=40 13:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:15 Get A/D filter: -9.255963e+061 result=40 13:33:15 Get A/D value=-858993460 result=40 13:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:15 Parameters OK 13:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:15 Set A/D data flow result=40 13:33:15 Set A/D channel type result=40 13:33:15 Set A/D encoding result=40 13:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:15 Set channel filter=0.000000e+000 result=40 13:33:15 Config A/D Result=40 13:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:15 Get A/D filter: -9.255963e+061 result=40 13:33:15 Get A/D value=-858993460 result=40 13:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:33:15 Aux= 13:33:15 Message to Camera, serial 89482 queued 13:33:23 Received message from Master: op=Shutter serial=89492 13:33:24 Shutter LASER close 13:33:24 Received message from Master: op=PointingHead serial=89496 13:33:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:33:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:33:24 Point started: ret=0 13:33:24 point_skyscan result=0 13:33:25 Check angles 13:33:25 SkyScan query 13:33:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 13:33:26 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 13:33:26 Check angles 13:33:26 SkyScan query 13:33:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.535<-20169 Statuses=0008 0009 13:33:26 Msec=750 True Az=112.995 Ze=-122.535 Az status=0008 Ze status=0009 13:33:27 Check angles 13:33:27 SkyScan query 13:33:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.535<-18769 Statuses=0008 0009 13:33:27 Msec=1500 True Az=112.995 Ze=-101.535 Az status=0008 Ze status=0009 13:33:27 Check angles 13:33:27 SkyScan query 13:33:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 13:33:28 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 13:33:28 Check angles 13:33:28 SkyScan query 13:33:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.625<-15975 Statuses=0008 0009 13:33:29 Msec=3000 True Az=112.995 Ze=-59.625 Az status=0008 Ze status=0009 13:33:29 Check angles 13:33:29 SkyScan query 13:33:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.67<-14578 Statuses=0008 0009 13:33:29 Msec=3750 True Az=112.995 Ze=-38.67 Az status=0008 Ze status=0009 13:33:30 Check angles 13:33:30 SkyScan query 13:33:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 13:33:30 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 13:33:30 Check angles 13:33:30 SkyScan query 13:33:31 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 13:33:31 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 13:33:31 Check angles 13:33:31 SkyScan query 13:33:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:33:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:33:32 Message to Master queued w/err=0: serial=89496 error=0 13:33:37 Received message from Master: op=Filter serial=89497 13:33:37 Color wheel filter change from 0 to 0 13:33:37 FLIGetFilterPos err=0 currentPosition=0 13:33:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:37 Filter is already there-color wheel unchanged 13:33:37 Received message from Master: op=Shutter serial=89498 13:33:37 Shutter LASER close 13:33:37 Received message from Camera: op=State serial=89500 13:33:37 GetSingleValue result=40 Value=cccccccc 13:33:37 SkyScan query 13:33:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:33:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:38 Parameters OK 13:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:38 Set A/D data flow result=40 13:33:38 Set A/D channel type result=40 13:33:38 Set A/D encoding result=40 13:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:38 Set channel filter=0.000000e+000 result=40 13:33:38 Config A/D Result=40 13:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:38 Get A/D filter: -9.255963e+061 result=40 13:33:38 Get A/D value=-858993460 result=40 13:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:38 Parameters OK 13:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:38 Set A/D data flow result=40 13:33:38 Set A/D channel type result=40 13:33:38 Set A/D encoding result=40 13:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:38 Set channel filter=0.000000e+000 result=40 13:33:38 Config A/D Result=40 13:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2019-3-3 13:33:38] 13:33:38 Get A/D filter: -9.255963e+061 result=40 13:33:38 Get A/D value=-858993460 result=40 13:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:33:38 Aux= 13:33:38 Message to Camera, serial 89500 queued 13:33:38 Received message from Master: op=Identify serial=89501 13:34:14 Received message from Master: op=PointingHead serial=89516 13:34:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:34:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:34:15 Point started: ret=0 13:34:15 point_skyscan result=0 13:34:16 Check angles 13:34:16 SkyScan query 13:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:34:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:34:16 Message to Master queued w/err=0: serial=89516 error=0 13:34:21 Received message from Master: op=Filter serial=89517 13:34:21 Color wheel filter change from 0 to 0 13:34:21 FLIGetFilterPos err=0 currentPosition=0 13:34:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:21 Filter is already there-color wheel unchanged 13:34:21 Received message from Master: op=Shutter serial=89518 13:34:21 Shutter LASER close 13:34:21 Received message from Camera: op=State serial=89520 13:34:21 GetSingleValue result=40 Value=cccccccc 13:34:21 SkyScan query 13:34:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:34:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:22 Parameters OK 13:34:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:22 Set A/D data flow result=40 13:34:22 Set A/D channel type result=40 13:34:22 Set A/D encoding result=40 13:34:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:22 Set channel filter=0.000000e+000 result=40 13:34:22 Config A/D Result=40 13:34:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:22 Get A/D filter: -9.255963e+061 result=40 13:34:22 Get A/D value=-858993460 result=40 13:34:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:22 Parameters OK 13:34:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:22 Set A/D data flow result=40 13:34:22 Set A/D channel type result=40 13:34:22 Set A/D encoding result=40 13:34:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:22 Set channel filter=0.000000e+000 result=40 13:34:22 Config A/D Result=40 13:34:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:22 Get A/D filter: -9.255963e+061 result=40 13:34:22 Get A/D value=-858993460 result=40 13:34:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:22 Aux= 13:34:22 Message to Camera, serial 89520 queued 13:34:59 Received message from Master: op=PointingHead serial=89533 13:34:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:34:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:34:59 Point started: ret=0 13:34:59 point_skyscan result=0 13:35:00 Check angles 13:35:00 SkyScan query 13:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:35:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:35:00 Message to Master queued w/err=0: serial=89533 error=0 13:35:05 Received message from Master: op=Filter serial=89534 13:35:05 Color wheel filter change from 0 to 0 13:35:05 FLIGetFilterPos err=0 currentPosition=0 13:35:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:05 Filter is already there-color wheel unchanged 13:35:06 Received message from Master: op=Shutter serial=89535 13:35:06 Shutter LASER close 13:35:06 Received message from Camera: op=State serial=89537 13:35:06 GetSingleValue result=40 Value=cccccccc 13:35:06 SkyScan query 13:35:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:35:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:06 Parameters OK 13:35:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:06 Set A/D data flow result=40 13:35:06 Set A/D channel type result=40 13:35:06 Set A/D encoding result=40 13:35:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:06 Set channel filter=0.000000e+000 result=40 13:35:06 Config A/D Result=40 13:35:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:06 Get A/D filter: -9.255963e+061 result=40 13:35:06 Get A/D value=-858993460 result=40 13:35:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:06 Parameters OK 13:35:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:06 Set A/D data flow result=40 13:35:06 Set A/D channel type result=40 13:35:06 Set A/D encoding result=40 13:35:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:06 Set channel filter=0.000000e+000 result=40 13:35:06 Config A/D Result=40 13:35:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:06 Get A/D filter: -9.255963e+061 result=40 13:35:06 Get A/D value=-858993460 result=40 13:35:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:06 Aux= 13:35:06 Message to Camera, serial 89537 queued 13:35:43 Received message from Master: op=PointingHead serial=89550 13:35:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:35:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:35:43 Point started: ret=0 13:35:43 point_skyscan result=0 13:35:44 Check angles 13:35:44 SkyScan query 13:35:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:35:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:35:45 Message to Master queued w/err=0: serial=89550 error=0 13:35:50 Received message from Master: op=Filter serial=89551 13:35:50 Color wheel filter change from 0 to 0 13:35:50 FLIGetFilterPos err=0 currentPosition=0 13:35:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:50 Filter is already there-color wheel unchanged 13:35:50 Received message from Master: op=Shutter serial=89552 13:35:50 Shutter LASER close 13:35:50 Received message from Camera: op=State serial=89554 13:35:50 GetSingleValue result=40 Value=cccccccc 13:35:50 SkyScan query 13:35:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:35:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:50 Parameters OK 13:35:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:50 Set A/D data flow result=40 13:35:50 Set A/D channel type result=40 13:35:50 Set A/D encoding result=40 13:35:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:50 Set channel filter=0.000000e+000 result=40 13:35:50 Config A/D Result=40 13:35:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:50 Get A/D filter: -9.255963e+061 result=40 13:35:50 Get A/D value=-858993460 result=40 13:35:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:50 Parameters OK 13:35:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:50 Set A/D data flow result=40 13:35:50 Set A/D channel type result=40 13:35:50 Set A/D encoding result=40 13:35:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:50 Set channel filter=0.000000e+000 result=40 13:35:50 Config A/D Result=40 13:35:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:50 Get A/D filter: -9.255963e+061 result=40 13:35:50 Get A/D value=-858993460 result=40 13:35:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:50 Aux= 13:35:50 Message to Camera, serial 89554 queued 13:36:27 Received message from Master: op=PointingHead serial=89567 13:36:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:36:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:36:28 Point started: ret=0 13:36:28 point_skyscan result=0 13:36:28 Check angles 13:36:28 SkyScan query 13:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.55<-13570 Statuses=0008 0009 13:36:29 Msec=0 True Az=112.995 Ze=-23.55 Az status=0008 Ze status=0009 13:36:29 Check angles 13:36:29 SkyScan query 13:36:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.925<-14995 Statuses=0008 0009 13:36:30 Msec=750 True Az=112.995 Ze=-44.925 Az status=0008 Ze status=0009 13:36:30 Check angles 13:36:30 SkyScan query 13:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.88<-16392 Statuses=0008 0009 13:36:31 Msec=1500 True Az=112.995 Ze=-65.88 Az status=0008 Ze status=0009 13:36:31 Check angles 13:36:31 SkyScan query 13:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 13:36:31 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 13:36:31 Check angles 13:36:31 SkyScan query 13:36:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 13:36:32 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 13:36:32 Check angles 13:36:32 SkyScan query 13:36:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.73<-20582 Statuses=0008 0009 13:36:33 Msec=3750 True Az=112.995 Ze=-128.73 Az status=0008 Ze status=0009 13:36:33 Check angles 13:36:33 SkyScan query 13:36:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 13:36:34 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 13:36:34 Check angles 13:36:34 SkyScan query 13:36:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 13:36:34 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 13:36:34 Check angles 13:36:34 SkyScan query 13:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:36:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:36:35 Message to Master queued w/err=0: serial=89567 error=0 13:36:40 Received message from Master: op=Filter serial=89568 13:36:40 Color wheel filter change from 0 to 0 13:36:40 FLIGetFilterPos err=0 currentPosition=0 13:36:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:40 Filter is already there-color wheel unchanged 13:36:40 Received message from Master: op=Shutter serial=89569 13:36:40 Shutter LASER open 13:36:40 Received message from Camera: op=State serial=89571 13:36:40 GetSingleValue result=40 Value=cccccccc 13:36:40 SkyScan query 13:36:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:36:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:41 Parameters OK 13:36:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:41 Set A/D data flow result=40 13:36:41 Set A/D channel type result=40 13:36:41 Set A/D encoding result=40 13:36:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:41 Set channel filter=0.000000e+000 result=40 13:36:41 Config A/D Result=40 13:36:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:41 Get A/D filter: -9.255963e+061 result=40 13:36:41 Get A/D value=-858993460 result=40 13:36:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:41 Parameters OK 13:36:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:41 Set A/D data flow result=40 13:36:41 Set A/D channel type result=40 13:36:41 Set A/D encoding result=40 13:36:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:41 Set channel filter=0.000000e+000 result=40 13:36:41 Config A/D Result=40 13:36:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:41 Get A/D filter: -9.255963e+061 result=40 13:36:41 Get A/D value=-858993460 result=40 13:36:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:41 Aux= 13:36:41 Message to Camera, serial 89571 queued 13:36:49 Received message from Master: op=Shutter serial=89581 13:36:49 Shutter LASER close 13:36:50 Received message from Master: op=PointingHead serial=89585 13:36:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:36:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:36:50 Point started: ret=0 13:36:50 point_skyscan result=0 13:36:51 Check angles 13:36:51 SkyScan query 13:36:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 13:36:52 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 13:36:52 Check angles 13:36:52 SkyScan query 13:36:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 13:36:52 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 13:36:53 Check angles 13:36:53 SkyScan query 13:36:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 13:36:53 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 13:36:53 Check angles 13:36:53 SkyScan query 13:36:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 13:36:54 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 13:36:54 Check angles 13:36:54 SkyScan query 13:36:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 13:36:55 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 13:36:55 Check angles 13:36:55 SkyScan query 13:36:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.31<-14554 Statuses=0008 0009 13:36:55 Msec=3750 True Az=112.995 Ze=-38.31 Az status=0008 Ze status=0009 13:36:56 Check angles 13:36:56 SkyScan query 13:36:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.37<-13158 Statuses=0008 0009 13:36:56 Msec=4500 True Az=112.995 Ze=-17.37 Az status=0008 Ze status=0009 13:36:56 Check angles 13:36:56 SkyScan query 13:36:57 SkyScan query done: ret=0 az=112.995<-7533 ze=3.6<-11760 Statuses=0008 0009 13:36:57 Msec=5250 True Az=112.995 Ze=3.6 Az status=0008 Ze status=0009 13:36:57 Check angles 13:36:57 SkyScan query 13:36:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:36:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:36:58 Message to Master queued w/err=0: serial=89585 error=0 13:37:03 Received message from Master: op=Filter serial=89586 13:37:03 Color wheel filter change from 0 to 0 13:37:03 FLIGetFilterPos err=0 currentPosition=0 13:37:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:03 Filter is already there-color wheel unchanged 13:37:03 Received message from Master: op=Shutter serial=89587 13:37:03 Shutter LASER close 13:37:03 Received message from Camera: op=State serial=89589 13:37:03 GetSingleValue result=40 Value=cccccccc 13:37:03 SkyScan query 13:37:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:37:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:04 Parameters OK 13:37:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:04 Set A/D data flow result=40 13:37:04 Set A/D channel type result=40 13:37:04 Set A/D encoding result=40 13:37:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:04 Set channel filter=0.000000e+000 result=40 13:37:04 Config A/D Result=40 13:37:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:04 Get A/D filter: -9.255963e+061 result=40 13:37:04 Get A/D value=-858993460 result=40 13:37:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:04 Parameters OK 13:37:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:04 Set A/D data flow result=40 13:37:04 Set A/D channel type result=40 13:37:04 Set A/D encoding result=40 13:37:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:04 Set channel filter=0.000000e+000 result=40 13:37:04 Config A/D Result=40 13:37:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:04 Get A/D filter: -9.255963e+061 result=40 13:37:04 Get A/D value=-858993460 result=40 13:37:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:04 Aux= 13:37:04 Message to Camera, serial 89589 queued 13:37:40 Received message from Master: op=PointingHead serial=89602 13:37:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:37:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:37:41 Point started: ret=0 13:37:41 point_skyscan result=0 13:37:42 Check angles 13:37:42 SkyScan query 13:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:37:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:37:42 Message to Master queued w/err=0: serial=89602 error=0 13:37:47 Received message from Master: op=Filter serial=89603 13:37:47 Color wheel filter change from 0 to 0 13:37:47 FLIGetFilterPos err=0 currentPosition=0 13:37:47 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:47 Filter is already there-color wheel unchanged 13:37:47 Received message from Master: op=Shutter serial=89604 13:37:47 Shutter LASER close 13:37:47 Received message from Camera: op=State serial=89606 13:37:47 GetSingleValue result=40 Value=cccccccc 13:37:47 SkyScan query 13:37:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:37:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:48 Parameters OK 13:37:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:48 Set A/D data flow result=40 13:37:48 Set A/D channel type result=40 13:37:48 Set A/D encoding result=40 13:37:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:48 Set channel filter=0.000000e+000 result=40 13:37:48 Config A/D Result=40 13:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:48 Get A/D filter: -9.255963e+061 result=40 13:37:48 Get A/D value=-858993460 result=40 13:37:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:48 Parameters OK 13:37:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:48 Set A/D data flow result=40 13:37:48 Set A/D channel type result=40 13:37:48 Set A/D encoding result=40 13:37:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:48 Set channel filter=0.000000e+000 result=40 13:37:48 Config A/D Result=40 13:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:48 Get A/D filter: -9.255963e+061 result=40 13:37:48 Get A/D value=-858993460 result=40 13:37:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:48 Aux= 13:37:48 Message to Camera, serial 89606 queued 13:38:25 Received message from Master: op=PointingHead serial=89619 13:38:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:38:25 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:38:25 Point started: ret=0 13:38:25 point_skyscan result=0 13:38:26 Check angles 13:38:26 SkyScan query 13:38:26 SkyScan query done: ret=0 az=135.66<-9044 ze=-6.51<-12434 Statuses=0009 0008 13:38:26 Msec=0 True Az=135.66 Ze=-6.51 Az status=0009 Ze status=0008 13:38:27 Check angles 13:38:27 SkyScan query 13:38:27 SkyScan query done: ret=0 az=153.18<-10212 ze=-6.495<-12433 Statuses=0009 0008 13:38:27 Msec=750 True Az=153.18 Ze=-6.495 Az status=0009 Ze status=0008 13:38:27 Check angles 13:38:27 SkyScan query 13:38:28 SkyScan query done: ret=0 az=170.985<-11399 ze=-6.495<-12433 Statuses=0009 0008 13:38:28 Msec=1500 True Az=170.985 Ze=-6.495 Az status=0009 Ze status=0008 13:38:28 Check angles 13:38:28 SkyScan query 13:38:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:38:29 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:38:29 Message to Master queued w/err=0: serial=89619 error=0 13:38:34 Received message from Master: op=Filter serial=89620 13:38:34 Color wheel filter change from 0 to 0 13:38:34 FLIGetFilterPos err=0 currentPosition=0 13:38:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:34 Filter is already there-color wheel unchanged 13:38:34 Received message from Master: op=Shutter serial=89621 13:38:34 Shutter LASER close 13:38:34 Received message from Camera: op=State serial=89623 13:38:34 GetSingleValue result=40 Value=cccccccc 13:38:34 SkyScan query 13:38:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:38:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:35 Parameters OK 13:38:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:35 Set A/D data flow result=40 13:38:35 Set A/D channel type result=40 13:38:35 Set A/D encoding result=40 13:38:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:35 Set channel filter=0.000000e+000 result=40 13:38:35 Config A/D Result=40 13:38:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:35 Get A/D filter: -9.255963e+061 result=40 13:38:35 Get A/D value=-858993460 result=40 13:38:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:35 Parameters OK 13:38:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:35 Set A/D data flow result=40 13:38:35 Set A/D channel type result=40 13:38:35 Set A/D encoding result=40 13:38:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:35 Set channel filter=0.000000e+000 result=40 13:38:35 Config A/D Result=40 13:38:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:35 Get A/D filter: -9.255963e+061 result=40 13:38:35 Get A/D value=-858993460 result=40 13:38:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:35 Aux= 13:38:35 Message to Camera, serial 89623 queued 13:39:11 Received message from Master: op=PointingHead serial=89636 13:39:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:39:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:39:12 Point started: ret=0 13:39:12 point_skyscan result=0 13:39:12 Check angles 13:39:12 SkyScan query 13:39:13 SkyScan query done: ret=0 az=152.745<-10183 ze=6.51<-11566 Statuses=0009 0008 13:39:13 Msec=0 True Az=152.745 Ze=6.51 Az status=0009 Ze status=0008 13:39:13 Check angles 13:39:13 SkyScan query 13:39:14 SkyScan query done: ret=0 az=134.895<-8993 ze=6.495<-11567 Statuses=0009 0008 13:39:14 Msec=750 True Az=134.895 Ze=6.495 Az status=0009 Ze status=0008 13:39:14 Check angles 13:39:14 SkyScan query 13:39:15 SkyScan query done: ret=0 az=117.465<-7831 ze=6.495<-11567 Statuses=0009 0008 13:39:15 Msec=1500 True Az=117.465 Ze=6.495 Az status=0009 Ze status=0008 13:39:15 Check angles 13:39:15 SkyScan query 13:39:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:39:15 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:39:15 Message to Master queued w/err=0: serial=89636 error=0 13:39:20 Received message from Master: op=Filter serial=89637 13:39:20 Color wheel filter change from 0 to 0 13:39:20 FLIGetFilterPos err=0 currentPosition=0 13:39:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:20 Filter is already there-color wheel unchanged 13:39:20 Received message from Master: op=Shutter serial=89638 13:39:20 Shutter LASER close 13:39:21 Received message from Camera: op=State serial=89640 13:39:21 GetSingleValue result=40 Value=cccccccc 13:39:21 SkyScan query 13:39:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:39:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:21 Parameters OK 13:39:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:21 Set A/D data flow result=40 13:39:21 Set A/D channel type result=40 13:39:21 Set A/D encoding result=40 13:39:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:21 Set channel filter=0.000000e+000 result=40 13:39:21 Config A/D Result=40 13:39:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:21 Get A/D filter: -9.255963e+061 result=40 13:39:21 Get A/D value=-858993460 result=40 13:39:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:21 Parameters OK 13:39:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:21 Set A/D data flow result=40 13:39:21 Set A/D channel type result=40 13:39:21 Set A/D encoding result=40 13:39:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:21 Set channel filter=0.000000e+000 result=40 13:39:21 Config A/D Result=40 13:39:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:21 Get A/D filter: -9.255963e+061 result=40 13:39:21 Get A/D value=-858993460 result=40 13:39:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:21 Aux= 13:39:21 Message to Camera, serial 89640 queued 13:39:58 Received message from Master: op=PointingHead serial=89653 13:39:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:39:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:39:58 Point started: ret=0 13:39:58 point_skyscan result=0 13:39:59 Check angles 13:39:59 SkyScan query 13:40:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 13:40:00 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 13:40:00 Check angles 13:40:00 SkyScan query 13:40:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 13:40:00 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 13:40:01 Check angles 13:40:01 SkyScan query 13:40:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 13:40:01 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 13:40:01 Check angles 13:40:01 SkyScan query 13:40:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 13:40:02 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 13:40:02 Check angles 13:40:02 SkyScan query 13:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 13:40:03 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 13:40:03 Check angles 13:40:03 SkyScan query 13:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.355<-20557 Statuses=0008 0009 13:40:03 Msec=3750 True Az=112.995 Ze=-128.355 Az status=0008 Ze status=0009 13:40:04 Check angles 13:40:04 SkyScan query 13:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.31<-21954 Statuses=0008 0009 13:40:04 Msec=4500 True Az=112.995 Ze=-149.31 Az status=0008 Ze status=0009 13:40:04 Check angles 13:40:04 SkyScan query 13:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 13:40:05 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 13:40:05 Check angles 13:40:05 SkyScan query 13:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:40:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:40:06 Message to Master queued w/err=0: serial=89653 error=0 13:40:11 Received message from Master: op=Filter serial=89654 13:40:11 Color wheel filter change from 0 to 0 13:40:11 FLIGetFilterPos err=0 currentPosition=0 13:40:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:11 Filter is already there-color wheel unchanged 13:40:11 Received message from Master: op=Shutter serial=89655 13:40:11 Shutter LASER open 13:40:11 Received message from Camera: op=State serial=89657 13:40:11 GetSingleValue result=40 Value=cccccccc 13:40:11 SkyScan query 13:40:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:40:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:12 Parameters OK 13:40:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:12 Set A/D data flow result=40 13:40:12 Set A/D channel type result=40 13:40:12 Set A/D encoding result=40 13:40:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:12 Set channel filter=0.000000e+000 result=40 13:40:12 Config A/D Result=40 13:40:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:12 Get A/D filter: -9.255963e+061 result=40 13:40:12 Get A/D value=-858993460 result=40 13:40:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:12 Parameters OK 13:40:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:12 Set A/D data flow result=40 13:40:12 Set A/D channel type result=40 13:40:12 Set A/D encoding result=40 13:40:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:12 Set channel filter=0.000000e+000 result=40 13:40:12 Config A/D Result=40 13:40:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:12 Get A/D filter: -9.255963e+061 result=40 13:40:12 Get A/D value=-858993460 result=40 13:40:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:12 Aux= 13:40:12 Message to Camera, serial 89657 queued 13:40:20 Received message from Master: op=Shutter serial=89667 13:40:20 Shutter LASER close 13:40:20 Received message from Master: op=PointingHead serial=89671 13:40:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:40:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:40:21 Point started: ret=0 13:40:21 point_skyscan result=0 13:40:21 Check angles 13:40:21 SkyScan query 13:40:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 13:40:22 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 13:40:22 Check angles 13:40:22 SkyScan query 13:40:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 13:40:23 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 13:40:23 Check angles 13:40:23 SkyScan query 13:40:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.565<-18771 Statuses=0008 0009 13:40:24 Msec=1500 True Az=112.995 Ze=-101.565 Az status=0008 Ze status=0009 13:40:24 Check angles 13:40:24 SkyScan query 13:40:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.595<-17373 Statuses=0008 0009 13:40:24 Msec=2250 True Az=112.995 Ze=-80.595 Az status=0008 Ze status=0009 13:40:24 Check angles 13:40:24 SkyScan query 13:40:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.67<-15978 Statuses=0008 0009 13:40:25 Msec=3000 True Az=112.995 Ze=-59.67 Az status=0008 Ze status=0009 13:40:25 Check angles 13:40:25 SkyScan query 13:40:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.715<-14581 Statuses=0008 0009 13:40:26 Msec=3750 True Az=112.995 Ze=-38.715 Az status=0008 Ze status=0009 13:40:26 Check angles 13:40:26 SkyScan query 13:40:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.76<-13184 Statuses=0008 0009 13:40:27 Msec=4500 True Az=112.995 Ze=-17.76 Az status=0008 Ze status=0009 13:40:27 Check angles 13:40:27 SkyScan query 13:40:27 SkyScan query done: ret=0 az=112.995<-7533 ze=3.18<-11788 Statuses=0008 0009 13:40:27 Msec=5250 True Az=112.995 Ze=3.18 Az status=0008 Ze status=0009 13:40:27 Check angles 13:40:27 SkyScan query 13:40:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:40:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:40:28 Message to Master queued w/err=0: serial=89671 error=0 13:40:33 Received message from Master: op=Filter serial=89672 13:40:33 Color wheel filter change from 0 to 0 13:40:33 FLIGetFilterPos err=0 currentPosition=0 13:40:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:33 Filter is already there-color wheel unchanged 13:40:33 Received message from Master: op=Shutter serial=89673 13:40:33 Shutter LASER close 13:40:33 Received message from Camera: op=State serial=89675 13:40:33 GetSingleValue result=40 Value=cccccccc 13:40:33 SkyScan query 13:40:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:40:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:34 Parameters OK 13:40:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:34 Set A/D data flow result=40 13:40:34 Set A/D channel type result=40 13:40:34 Set A/D encoding result=40 13:40:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:34 Set channel filter=0.000000e+000 result=40 13:40:34 Config A/D Result=40 13:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:34 Get A/D filter: -9.255963e+061 result=40 13:40:34 Get A/D value=-858993460 result=40 13:40:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:34 Parameters OK 13:40:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:34 Set A/D data flow result=40 13:40:34 Set A/D channel type result=40 13:40:34 Set A/D encoding result=40 13:40:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:34 Set channel filter=0.000000e+000 result=40 13:40:34 Config A/D Result=40 13:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:34 Get A/D filter: -9.255963e+061 result=40 13:40:34 Get A/D value=-858993460 result=40 13:40:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:34 Aux= 13:40:34 Message to Camera, serial 89675 queued 13:41:11 Received message from Master: op=PointingHead serial=89688 13:41:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:41:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:41:11 Point started: ret=0 13:41:11 point_skyscan result=0 13:41:12 Check angles 13:41:12 SkyScan query 13:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:41:12 Message to Master queued w/err=0: serial=89688 error=0 13:41:17 Received message from Master: op=Filter serial=89689 13:41:17 Color wheel filter change from 0 to 0 13:41:17 FLIGetFilterPos err=0 currentPosition=0 13:41:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:17 Filter is already there-color wheel unchanged 13:41:18 Received message from Master: op=Shutter serial=89690 13:41:18 Shutter LASER close 13:41:18 Received message from Camera: op=State serial=89692 13:41:18 GetSingleValue result=40 Value=cccccccc 13:41:18 SkyScan query 13:41:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:18 Parameters OK 13:41:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:18 Set A/D data flow result=40 13:41:18 Set A/D channel type result=40 13:41:18 Set A/D encoding result=40 13:41:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:18 Set channel filter=0.000000e+000 result=40 13:41:18 Config A/D Result=40 13:41:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:18 Get A/D filter: -9.255963e+061 result=40 13:41:18 Get A/D value=-858993460 result=40 13:41:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:18 Parameters OK 13:41:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:18 Set A/D data flow result=40 13:41:18 Set A/D channel type result=40 13:41:18 Set A/D encoding result=40 13:41:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:18 Set channel filter=0.000000e+000 result=40 13:41:18 Config A/D Result=40 13:41:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:18 Get A/D filter: -9.255963e+061 result=40 13:41:18 Get A/D value=-858993460 result=40 13:41:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:18 Aux= 13:41:18 Message to Camera, serial 89692 queued 13:41:55 Received message from Master: op=PointingHead serial=89705 13:41:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:41:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:41:55 Point started: ret=0 13:41:55 point_skyscan result=0 13:41:56 Check angles 13:41:56 SkyScan query 13:41:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:41:57 Message to Master queued w/err=0: serial=89705 error=0 13:42:02 Received message from Master: op=Filter serial=89706 13:42:02 Color wheel filter change from 0 to 0 13:42:02 FLIGetFilterPos err=0 currentPosition=0 13:42:02 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:02 Filter is already there-color wheel unchanged 13:42:02 Received message from Master: op=Shutter serial=89707 13:42:02 Shutter LASER close 13:42:02 Received message from Camera: op=State serial=89709 13:42:02 GetSingleValue result=40 Value=cccccccc 13:42:02 SkyScan query 13:42:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:42:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:03 Parameters OK 13:42:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:03 Set A/D data flow result=40 13:42:03 Set A/D channel type result=40 13:42:03 Set A/D encoding result=40 13:42:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:03 Set channel filter=0.000000e+000 result=40 13:42:03 Config A/D Result=40 13:42:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:03 Get A/D filter: -9.255963e+061 result=40 13:42:03 Get A/D value=-858993460 result=40 13:42:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:03 Parameters OK 13:42:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:03 Set A/D data flow result=40 13:42:03 Set A/D channel type result=40 13:42:03 Set A/D encoding result=40 13:42:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:03 Set channel filter=0.000000e+000 result=40 13:42:03 Config A/D Result=40 13:42:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:03 Get A/D filter: -9.255963e+061 result=40 13:42:03 Get A/D value=-858993460 result=40 13:42:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:03 Aux= 13:42:03 Message to Camera, serial 89709 queued 13:42:39 Received message from Master: op=PointingHead serial=89722 13:42:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:42:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:42:40 Point started: ret=0 13:42:40 point_skyscan result=0 13:42:40 Check angles 13:42:40 SkyScan query 13:42:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:42:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:42:41 Message to Master queued w/err=0: serial=89722 error=0 13:42:46 Received message from Master: op=Filter serial=89723 13:42:46 Color wheel filter change from 0 to 0 13:42:46 FLIGetFilterPos err=0 currentPosition=0 13:42:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:46 Filter is already there-color wheel unchanged 13:42:46 Received message from Master: op=Shutter serial=89724 13:42:46 Shutter LASER close 13:42:46 Received message from Camera: op=State serial=89726 13:42:46 GetSingleValue result=40 Value=cccccccc 13:42:46 SkyScan query 13:42:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:42:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:47 Parameters OK 13:42:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:47 Set A/D data flow result=40 13:42:47 Set A/D channel type result=40 13:42:47 Set A/D encoding result=40 13:42:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:47 Set channel filter=0.000000e+000 result=40 13:42:47 Config A/D Result=40 13:42:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:47 Get A/D filter: -9.255963e+061 result=40 13:42:47 Get A/D value=-858993460 result=40 13:42:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:47 Parameters OK 13:42:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:47 Set A/D data flow result=40 13:42:47 Set A/D channel type result=40 13:42:47 Set A/D encoding result=40 13:42:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:47 Set channel filter=0.000000e+000 result=40 13:42:47 Config A/D Result=40 13:42:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:47 Get A/D filter: -9.255963e+061 result=40 13:42:47 Get A/D value=-858993460 result=40 13:42:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:47 Aux= 13:42:47 Message to Camera, serial 89726 queued 13:43:24 Received message from Master: op=PointingHead serial=89739 13:43:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:43:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:43:24 Point started: ret=0 13:43:24 point_skyscan result=0 13:43:25 Check angles 13:43:25 SkyScan query 13:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 13:43:25 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 13:43:26 Check angles 13:43:26 SkyScan query 13:43:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.775<-14985 Statuses=0008 0009 13:43:26 Msec=750 True Az=112.995 Ze=-44.775 Az status=0008 Ze status=0009 13:43:26 Check angles 13:43:26 SkyScan query 13:43:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.15<-16410 Statuses=0008 0009 13:43:27 Msec=1500 True Az=112.995 Ze=-66.15 Az status=0008 Ze status=0009 13:43:27 Check angles 13:43:27 SkyScan query 13:43:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 13:43:28 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 13:43:28 Check angles 13:43:28 SkyScan query 13:43:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.48<-19232 Statuses=0008 0009 13:43:28 Msec=3000 True Az=112.995 Ze=-108.48 Az status=0008 Ze status=0009 13:43:29 Check angles 13:43:29 SkyScan query 13:43:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.87<-20658 Statuses=0008 0009 13:43:29 Msec=3750 True Az=112.995 Ze=-129.87 Az status=0008 Ze status=0009 13:43:29 Check angles 13:43:29 SkyScan query 13:43:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.245<-22083 Statuses=0008 0009 13:43:30 Msec=4500 True Az=112.995 Ze=-151.245 Az status=0008 Ze status=0009 13:43:30 Check angles 13:43:30 SkyScan query 13:43:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.765<-23451 Statuses=0008 0009 13:43:31 Msec=5250 True Az=112.995 Ze=-171.765 Az status=0008 Ze status=0009 13:43:31 Check angles 13:43:31 SkyScan query 13:43:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:43:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:43:32 Message to Master queued w/err=0: serial=89739 error=0 13:43:37 Received message from Master: op=Filter serial=89740 13:43:37 Color wheel filter change from 0 to 0 13:43:37 FLIGetFilterPos err=0 currentPosition=0 13:43:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:37 Filter is already there-color wheel unchanged 13:43:37 Received message from Master: op=Shutter serial=89741 13:43:37 Shutter LASER open 13:43:37 Received message from Camera: op=State serial=89743 13:43:37 GetSingleValue result=40 Value=cccccccc 13:43:37 SkyScan query 13:43:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:43:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:37 Parameters OK 13:43:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:37 Set A/D data flow result=40 13:43:37 Set A/D channel type result=40 13:43:37 Set A/D encoding result=40 13:43:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:37 Set channel filter=0.000000e+000 result=40 13:43:37 Config A/D Result=40 13:43:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:37 Get A/D filter: -9.255963e+061 result=40 13:43:37 Get A/D value=-858993460 result=40 13:43:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:37 Parameters OK 13:43:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:37 Set A/D data flow result=40 13:43:37 Set A/D channel type result=40 13:43:37 Set A/D encoding result=40 13:43:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:37 Set channel filter=0.000000e+000 result=40 13:43:37 Config A/D Result=40 13:43:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:37 Get A/D filter: -9.255963e+061 result=40 13:43:37 Get A/D value=-858993460 result=40 13:43:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:37 Aux= 13:43:37 Message to Camera, serial 89743 queued 13:43:46 Received message from Master: op=Shutter serial=89753 13:43:46 Shutter LASER close 13:43:46 Received message from Master: op=PointingHead serial=89757 13:43:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:43:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:43:47 Point started: ret=0 13:43:47 point_skyscan result=0 13:43:48 Check angles 13:43:48 SkyScan query 13:43:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 13:43:48 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 13:43:48 Check angles 13:43:48 SkyScan query 13:43:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 13:43:49 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 13:43:49 Check angles 13:43:49 SkyScan query 13:43:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 13:43:50 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 13:43:50 Check angles 13:43:50 SkyScan query 13:43:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.28<-17352 Statuses=0008 0009 13:43:50 Msec=2250 True Az=112.995 Ze=-80.28 Az status=0008 Ze status=0009 [UTC 2019-3-3 13:43:50] 13:43:51 Check angles 13:43:51 SkyScan query 13:43:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.355<-15957 Statuses=0008 0009 13:43:51 Msec=3000 True Az=112.995 Ze=-59.355 Az status=0008 Ze status=0009 13:43:51 Check angles 13:43:51 SkyScan query 13:43:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.965<-14531 Statuses=0008 0009 13:43:52 Msec=3750 True Az=112.995 Ze=-37.965 Az status=0008 Ze status=0009 13:43:52 Check angles 13:43:52 SkyScan query 13:43:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.01<-13134 Statuses=0008 0009 13:43:53 Msec=4500 True Az=112.995 Ze=-17.01 Az status=0008 Ze status=0009 13:43:53 Check angles 13:43:53 SkyScan query 13:43:53 SkyScan query done: ret=0 az=112.995<-7533 ze=3.93<-11738 Statuses=0008 0009 13:43:53 Msec=5250 True Az=112.995 Ze=3.93 Az status=0008 Ze status=0009 13:43:54 Check angles 13:43:54 SkyScan query 13:43:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:43:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:43:54 Message to Master queued w/err=0: serial=89757 error=0 13:43:59 Received message from Master: op=Filter serial=89758 13:43:59 Color wheel filter change from 0 to 0 13:43:59 FLIGetFilterPos err=0 currentPosition=0 13:43:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:59 Filter is already there-color wheel unchanged 13:43:59 Received message from Master: op=Shutter serial=89759 13:43:59 Shutter LASER close 13:44:00 Received message from Camera: op=State serial=89761 13:44:00 GetSingleValue result=40 Value=cccccccc 13:44:00 SkyScan query 13:44:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:44:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:00 Parameters OK 13:44:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:00 Set A/D data flow result=40 13:44:00 Set A/D channel type result=40 13:44:00 Set A/D encoding result=40 13:44:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:00 Set channel filter=0.000000e+000 result=40 13:44:00 Config A/D Result=40 13:44:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:00 Get A/D filter: -9.255963e+061 result=40 13:44:00 Get A/D value=-858993460 result=40 13:44:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:00 Parameters OK 13:44:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:00 Set A/D data flow result=40 13:44:00 Set A/D channel type result=40 13:44:00 Set A/D encoding result=40 13:44:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:00 Set channel filter=0.000000e+000 result=40 13:44:00 Config A/D Result=40 13:44:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:00 Get A/D filter: -9.255963e+061 result=40 13:44:00 Get A/D value=-858993460 result=40 13:44:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:00 Aux= 13:44:00 Message to Camera, serial 89761 queued 13:44:37 Received message from Master: op=PointingHead serial=89774 13:44:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:44:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:44:37 Point started: ret=0 13:44:37 point_skyscan result=0 13:44:38 Check angles 13:44:38 SkyScan query 13:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:44:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:44:39 Message to Master queued w/err=0: serial=89774 error=0 13:44:44 Received message from Master: op=Filter serial=89775 13:44:44 Color wheel filter change from 0 to 0 13:44:44 FLIGetFilterPos err=0 currentPosition=0 13:44:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:44 Filter is already there-color wheel unchanged 13:44:44 Received message from Master: op=Shutter serial=89776 13:44:44 Shutter LASER close 13:44:44 Received message from Camera: op=State serial=89778 13:44:44 GetSingleValue result=40 Value=cccccccc 13:44:44 SkyScan query 13:44:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:44:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:44 Parameters OK 13:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:44 Set A/D data flow result=40 13:44:44 Set A/D channel type result=40 13:44:44 Set A/D encoding result=40 13:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:44 Set channel filter=0.000000e+000 result=40 13:44:44 Config A/D Result=40 13:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:44 Get A/D filter: -9.255963e+061 result=40 13:44:44 Get A/D value=-858993460 result=40 13:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:44 Parameters OK 13:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:44 Set A/D data flow result=40 13:44:44 Set A/D channel type result=40 13:44:44 Set A/D encoding result=40 13:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:44 Set channel filter=0.000000e+000 result=40 13:44:44 Config A/D Result=40 13:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:44 Get A/D filter: -9.255963e+061 result=40 13:44:44 Get A/D value=-858993460 result=40 13:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:44 Aux= 13:44:44 Message to Camera, serial 89778 queued 13:45:21 Received message from Master: op=PointingHead serial=89791 13:45:21 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:45:21 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:45:22 Point started: ret=0 13:45:22 point_skyscan result=0 13:45:22 Check angles 13:45:22 SkyScan query 13:45:23 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 13:45:23 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 13:45:23 Check angles 13:45:23 SkyScan query 13:45:24 SkyScan query done: ret=0 az=154.02<-10268 ze=-6.495<-12433 Statuses=0009 0008 13:45:24 Msec=750 True Az=154.02 Ze=-6.495 Az status=0009 Ze status=0008 13:45:24 Check angles 13:45:24 SkyScan query 13:45:24 SkyScan query done: ret=0 az=171.465<-11431 ze=-6.495<-12433 Statuses=0009 0008 13:45:24 Msec=1500 True Az=171.465 Ze=-6.495 Az status=0009 Ze status=0008 13:45:25 Check angles 13:45:25 SkyScan query 13:45:25 SkyScan query done: ret=0 az=175.98<-11732 ze=-6.495<-12433 Statuses=0008 0008 13:45:25 Msec=2250 True Az=175.98 Ze=-6.495 Az status=0008 Ze status=0008 13:45:25 Message to Master queued w/err=0: serial=89791 error=0 13:45:30 Received message from Master: op=Filter serial=89792 13:45:30 Color wheel filter change from 0 to 0 13:45:30 FLIGetFilterPos err=0 currentPosition=0 13:45:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:30 Filter is already there-color wheel unchanged 13:45:30 Received message from Master: op=Shutter serial=89793 13:45:30 Shutter LASER close 13:45:30 Received message from Camera: op=State serial=89795 13:45:30 GetSingleValue result=40 Value=cccccccc 13:45:30 SkyScan query 13:45:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:45:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:31 Parameters OK 13:45:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:31 Set A/D data flow result=40 13:45:31 Set A/D channel type result=40 13:45:31 Set A/D encoding result=40 13:45:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:31 Set channel filter=0.000000e+000 result=40 13:45:31 Config A/D Result=40 13:45:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:31 Get A/D filter: -9.255963e+061 result=40 13:45:31 Get A/D value=-858993460 result=40 13:45:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:31 Parameters OK 13:45:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:31 Set A/D data flow result=40 13:45:31 Set A/D channel type result=40 13:45:31 Set A/D encoding result=40 13:45:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:31 Set channel filter=0.000000e+000 result=40 13:45:31 Config A/D Result=40 13:45:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:31 Get A/D filter: -9.255963e+061 result=40 13:45:31 Get A/D value=-858993460 result=40 13:45:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:31 Aux= 13:45:31 Message to Camera, serial 89795 queued 13:46:08 Received message from Master: op=PointingHead serial=89808 13:46:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:46:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:46:08 Point started: ret=0 13:46:08 point_skyscan result=0 13:46:09 Check angles 13:46:09 SkyScan query 13:46:09 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 13:46:09 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 13:46:10 Check angles 13:46:10 SkyScan query 13:46:10 SkyScan query done: ret=0 az=135.12<-9008 ze=6.495<-11567 Statuses=0009 0008 13:46:10 Msec=750 True Az=135.12 Ze=6.495 Az status=0009 Ze status=0008 13:46:10 Check angles 13:46:10 SkyScan query 13:46:11 SkyScan query done: ret=0 az=117.645<-7843 ze=6.495<-11567 Statuses=0009 0008 13:46:11 Msec=1500 True Az=117.645 Ze=6.495 Az status=0009 Ze status=0008 13:46:11 Check angles 13:46:11 SkyScan query 13:46:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:46:12 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:46:12 Message to Master queued w/err=0: serial=89808 error=0 13:46:17 Received message from Master: op=Filter serial=89809 13:46:17 Color wheel filter change from 0 to 0 13:46:17 FLIGetFilterPos err=0 currentPosition=0 13:46:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:17 Filter is already there-color wheel unchanged 13:46:17 Received message from Master: op=Shutter serial=89810 13:46:17 Shutter LASER close 13:46:17 Received message from Camera: op=State serial=89812 13:46:17 GetSingleValue result=40 Value=cccccccc 13:46:17 SkyScan query 13:46:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:46:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:17 Parameters OK 13:46:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:17 Set A/D data flow result=40 13:46:17 Set A/D channel type result=40 13:46:17 Set A/D encoding result=40 13:46:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:17 Set channel filter=0.000000e+000 result=40 13:46:17 Config A/D Result=40 13:46:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:17 Get A/D filter: -9.255963e+061 result=40 13:46:17 Get A/D value=-858993460 result=40 13:46:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:17 Parameters OK 13:46:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:17 Set A/D data flow result=40 13:46:17 Set A/D channel type result=40 13:46:17 Set A/D encoding result=40 13:46:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:17 Set channel filter=0.000000e+000 result=40 13:46:17 Config A/D Result=40 13:46:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:17 Get A/D filter: -9.255963e+061 result=40 13:46:17 Get A/D value=-858993460 result=40 13:46:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:17 Aux= 13:46:17 Message to Camera, serial 89812 queued 13:46:54 Received message from Master: op=PointingHead serial=89825 13:46:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:46:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:46:55 Point started: ret=0 13:46:55 point_skyscan result=0 13:46:55 Check angles 13:46:55 SkyScan query 13:46:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.85<-13590 Statuses=0008 0009 13:46:56 Msec=0 True Az=112.995 Ze=-23.85 Az status=0008 Ze status=0009 13:46:56 Check angles 13:46:56 SkyScan query 13:46:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 13:46:57 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 13:46:57 Check angles 13:46:57 SkyScan query 13:46:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 13:46:57 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 13:46:58 Check angles 13:46:58 SkyScan query 13:46:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 13:46:58 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 13:46:58 Check angles 13:46:58 SkyScan query 13:46:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.64<-19176 Statuses=0008 0009 13:46:59 Msec=3000 True Az=112.995 Ze=-107.64 Az status=0008 Ze status=0009 13:46:59 Check angles 13:46:59 SkyScan query 13:47:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 13:47:00 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 13:47:00 Check angles 13:47:00 SkyScan query 13:47:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.55<-21970 Statuses=0008 0009 13:47:00 Msec=4500 True Az=112.995 Ze=-149.55 Az status=0008 Ze status=0009 13:47:01 Check angles 13:47:01 SkyScan query 13:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.49<-23366 Statuses=0008 0009 13:47:01 Msec=5250 True Az=112.995 Ze=-170.49 Az status=0008 Ze status=0009 13:47:01 Check angles 13:47:01 SkyScan query 13:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:47:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:47:02 Message to Master queued w/err=0: serial=89825 error=0 13:47:07 Received message from Master: op=Filter serial=89826 13:47:07 Color wheel filter change from 0 to 0 13:47:07 FLIGetFilterPos err=0 currentPosition=0 13:47:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:07 Filter is already there-color wheel unchanged 13:47:07 Received message from Master: op=Shutter serial=89827 13:47:07 Shutter LASER open 13:47:07 Received message from Camera: op=State serial=89829 13:47:07 GetSingleValue result=40 Value=cccccccc 13:47:07 SkyScan query 13:47:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:47:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:08 Parameters OK 13:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:08 Set A/D data flow result=40 13:47:08 Set A/D channel type result=40 13:47:08 Set A/D encoding result=40 13:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:08 Set channel filter=0.000000e+000 result=40 13:47:08 Config A/D Result=40 13:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:08 Get A/D filter: -9.255963e+061 result=40 13:47:08 Get A/D value=-858993460 result=40 13:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:08 Parameters OK 13:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:08 Set A/D data flow result=40 13:47:08 Set A/D channel type result=40 13:47:08 Set A/D encoding result=40 13:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:08 Set channel filter=0.000000e+000 result=40 13:47:08 Config A/D Result=40 13:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:08 Get A/D filter: -9.255963e+061 result=40 13:47:08 Get A/D value=-858993460 result=40 13:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:08 Aux= 13:47:08 Message to Camera, serial 89829 queued 13:47:16 Received message from Master: op=Shutter serial=89839 13:47:16 Shutter LASER close 13:47:17 Received message from Master: op=PointingHead serial=89843 13:47:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:47:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:47:17 Point started: ret=0 13:47:17 point_skyscan result=0 13:47:18 Check angles 13:47:18 SkyScan query 13:47:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 13:47:18 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 13:47:19 Check angles 13:47:19 SkyScan query 13:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.43<-20162 Statuses=0008 0009 13:47:19 Msec=750 True Az=112.995 Ze=-122.43 Az status=0008 Ze status=0009 13:47:19 Check angles 13:47:19 SkyScan query 13:47:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 13:47:20 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 13:47:20 Check angles 13:47:20 SkyScan query 13:47:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.635<-17309 Statuses=0008 0009 13:47:21 Msec=2250 True Az=112.995 Ze=-79.635 Az status=0008 Ze status=0009 13:47:21 Check angles 13:47:21 SkyScan query 13:47:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.68<-15912 Statuses=0008 0009 13:47:21 Msec=3000 True Az=112.995 Ze=-58.68 Az status=0008 Ze status=0009 13:47:22 Check angles 13:47:22 SkyScan query 13:47:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 13:47:22 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 13:47:22 Check angles 13:47:22 SkyScan query 13:47:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.77<-13118 Statuses=0008 0009 13:47:23 Msec=4500 True Az=112.995 Ze=-16.77 Az status=0008 Ze status=0009 13:47:23 Check angles 13:47:23 SkyScan query 13:47:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.17<-11722 Statuses=0008 0009 13:47:24 Msec=5250 True Az=112.995 Ze=4.17 Az status=0008 Ze status=0009 13:47:24 Check angles 13:47:24 SkyScan query 13:47:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:47:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:47:24 Message to Master queued w/err=0: serial=89843 error=0 13:47:29 Received message from Master: op=Filter serial=89844 13:47:29 Color wheel filter change from 0 to 0 13:47:29 FLIGetFilterPos err=0 currentPosition=0 13:47:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:29 Filter is already there-color wheel unchanged 13:47:30 Received message from Master: op=Shutter serial=89845 13:47:30 Shutter LASER close 13:47:30 Received message from Camera: op=State serial=89847 13:47:30 GetSingleValue result=40 Value=cccccccc 13:47:30 SkyScan query 13:47:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:47:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:30 Parameters OK 13:47:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:30 Set A/D data flow result=40 13:47:30 Set A/D channel type result=40 13:47:30 Set A/D encoding result=40 13:47:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:30 Set channel filter=0.000000e+000 result=40 13:47:30 Config A/D Result=40 13:47:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:30 Get A/D filter: -9.255963e+061 result=40 13:47:30 Get A/D value=-858993460 result=40 13:47:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:30 Parameters OK 13:47:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:30 Set A/D data flow result=40 13:47:30 Set A/D channel type result=40 13:47:30 Set A/D encoding result=40 13:47:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:30 Set channel filter=0.000000e+000 result=40 13:47:30 Config A/D Result=40 13:47:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:30 Get A/D filter: -9.255963e+061 result=40 13:47:30 Get A/D value=-858993460 result=40 13:47:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:30 Aux= 13:47:30 Message to Camera, serial 89847 queued 13:48:07 Received message from Master: op=PointingHead serial=89860 13:48:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:48:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:48:08 Point started: ret=0 13:48:08 point_skyscan result=0 13:48:08 Check angles 13:48:08 SkyScan query 13:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:48:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:48:09 Message to Master queued w/err=0: serial=89860 error=0 13:48:14 Received message from Master: op=Filter serial=89861 13:48:14 Color wheel filter change from 0 to 0 13:48:14 FLIGetFilterPos err=0 currentPosition=0 13:48:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:14 Filter is already there-color wheel unchanged 13:48:14 Received message from Master: op=Shutter serial=89862 13:48:14 Shutter LASER close 13:48:14 Received message from Camera: op=State serial=89864 13:48:14 GetSingleValue result=40 Value=cccccccc 13:48:14 SkyScan query 13:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:48:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:15 Parameters OK 13:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:15 Set A/D data flow result=40 13:48:15 Set A/D channel type result=40 13:48:15 Set A/D encoding result=40 13:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:15 Set channel filter=0.000000e+000 result=40 13:48:15 Config A/D Result=40 13:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:15 Get A/D filter: -9.255963e+061 result=40 13:48:15 Get A/D value=-858993460 result=40 13:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:15 Parameters OK 13:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:15 Set A/D data flow result=40 13:48:15 Set A/D channel type result=40 13:48:15 Set A/D encoding result=40 13:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:15 Set channel filter=0.000000e+000 result=40 13:48:15 Config A/D Result=40 13:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:15 Get A/D filter: -9.255963e+061 result=40 13:48:15 Get A/D value=-858993460 result=40 13:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:15 Aux= 13:48:15 Message to Camera, serial 89864 queued 13:48:51 Received message from Master: op=PointingHead serial=89876 13:48:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:48:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:48:51 Point started: ret=0 13:48:51 point_skyscan result=0 13:48:52 Check angles 13:48:52 SkyScan query 13:48:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:48:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:48:52 Message to Master queued w/err=0: serial=89876 error=0 13:48:57 Received message from Master: op=Filter serial=89877 13:48:57 Color wheel filter change from 0 to 0 13:48:57 FLIGetFilterPos err=0 currentPosition=0 13:48:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:57 Filter is already there-color wheel unchanged 13:48:58 Received message from Master: op=Shutter serial=89878 13:48:58 Shutter LASER close 13:48:58 Received message from Camera: op=State serial=89880 13:48:58 GetSingleValue result=40 Value=cccccccc 13:48:58 SkyScan query 13:48:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:48:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:58 Parameters OK 13:48:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:58 Set A/D data flow result=40 13:48:58 Set A/D channel type result=40 13:48:58 Set A/D encoding result=40 13:48:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:58 Set channel filter=0.000000e+000 result=40 13:48:58 Config A/D Result=40 13:48:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:58 Get A/D filter: -9.255963e+061 result=40 13:48:58 Get A/D value=-858993460 result=40 13:48:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:58 Parameters OK 13:48:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:58 Set A/D data flow result=40 13:48:58 Set A/D channel type result=40 13:48:58 Set A/D encoding result=40 13:48:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:58 Set channel filter=0.000000e+000 result=40 13:48:58 Config A/D Result=40 13:48:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:58 Get A/D filter: -9.255963e+061 result=40 13:48:58 Get A/D value=-858993460 result=40 13:48:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:58 Aux= 13:48:58 Message to Camera, serial 89880 queued 13:49:35 Received message from Master: op=PointingHead serial=89893 13:49:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:49:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:49:35 Point started: ret=0 13:49:35 point_skyscan result=0 13:49:36 Check angles 13:49:36 SkyScan query 13:49:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:49:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:49:37 Message to Master queued w/err=0: serial=89893 error=0 13:49:42 Received message from Master: op=Filter serial=89894 13:49:42 Color wheel filter change from 0 to 0 13:49:42 FLIGetFilterPos err=0 currentPosition=0 13:49:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:42 Filter is already there-color wheel unchanged 13:49:42 Received message from Master: op=Shutter serial=89895 13:49:42 Shutter LASER close 13:49:42 Received message from Camera: op=State serial=89897 13:49:42 GetSingleValue result=40 Value=cccccccc 13:49:42 SkyScan query 13:49:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:49:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:42 Parameters OK 13:49:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:42 Set A/D data flow result=40 13:49:42 Set A/D channel type result=40 13:49:42 Set A/D encoding result=40 13:49:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:42 Set channel filter=0.000000e+000 result=40 13:49:42 Config A/D Result=40 13:49:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:42 Get A/D filter: -9.255963e+061 result=40 13:49:42 Get A/D value=-858993460 result=40 13:49:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:42 Parameters OK 13:49:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:42 Set A/D data flow result=40 13:49:42 Set A/D channel type result=40 13:49:42 Set A/D encoding result=40 13:49:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:42 Set channel filter=0.000000e+000 result=40 13:49:42 Config A/D Result=40 13:49:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:42 Get A/D filter: -9.255963e+061 result=40 13:49:42 Get A/D value=-858993460 result=40 13:49:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:42 Aux= 13:49:42 Message to Camera, serial 89897 queued 13:50:19 Received message from Master: op=PointingHead serial=89910 13:50:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:50:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:50:20 Point started: ret=0 13:50:20 point_skyscan result=0 13:50:20 Check angles 13:50:20 SkyScan query 13:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 13:50:21 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 13:50:21 Check angles 13:50:21 SkyScan query 13:50:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.16<-14944 Statuses=0008 0009 13:50:22 Msec=750 True Az=112.995 Ze=-44.16 Az status=0008 Ze status=0009 13:50:22 Check angles 13:50:22 SkyScan query 13:50:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.115<-16341 Statuses=0008 0009 13:50:22 Msec=1500 True Az=112.995 Ze=-65.115 Az status=0008 Ze status=0009 13:50:23 Check angles 13:50:23 SkyScan query 13:50:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.085<-17739 Statuses=0008 0009 13:50:23 Msec=2250 True Az=112.995 Ze=-86.085 Az status=0008 Ze status=0009 13:50:23 Check angles 13:50:23 SkyScan query 13:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.025<-19135 Statuses=0008 0009 13:50:24 Msec=3000 True Az=112.995 Ze=-107.025 Az status=0008 Ze status=0009 13:50:24 Check angles 13:50:24 SkyScan query 13:50:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.995<-20533 Statuses=0008 0009 13:50:25 Msec=3750 True Az=112.995 Ze=-127.995 Az status=0008 Ze status=0009 13:50:25 Check angles 13:50:25 SkyScan query 13:50:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.935<-21929 Statuses=0008 0009 13:50:25 Msec=4500 True Az=112.995 Ze=-148.935 Az status=0008 Ze status=0009 13:50:26 Check angles 13:50:26 SkyScan query 13:50:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.875<-23325 Statuses=0008 0009 13:50:26 Msec=5250 True Az=112.995 Ze=-169.875 Az status=0008 Ze status=0009 13:50:26 Check angles 13:50:26 SkyScan query 13:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:50:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:50:27 Message to Master queued w/err=0: serial=89910 error=0 13:50:32 Received message from Master: op=Filter serial=89911 13:50:32 Color wheel filter change from 0 to 0 13:50:32 FLIGetFilterPos err=0 currentPosition=0 13:50:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:32 Filter is already there-color wheel unchanged 13:50:32 Received message from Master: op=Shutter serial=89912 13:50:32 Shutter LASER open 13:50:32 Received message from Camera: op=State serial=89914 13:50:32 GetSingleValue result=40 Value=cccccccc 13:50:32 SkyScan query 13:50:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:50:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:33 Parameters OK 13:50:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:33 Set A/D data flow result=40 13:50:33 Set A/D channel type result=40 13:50:33 Set A/D encoding result=40 13:50:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:33 Set channel filter=0.000000e+000 result=40 13:50:33 Config A/D Result=40 13:50:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:33 Get A/D filter: -9.255963e+061 result=40 13:50:33 Get A/D value=-858993460 result=40 13:50:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:33 Parameters OK 13:50:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:33 Set A/D data flow result=40 13:50:33 Set A/D channel type result=40 13:50:33 Set A/D encoding result=40 13:50:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:33 Set channel filter=0.000000e+000 result=40 13:50:33 Config A/D Result=40 13:50:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:33 Get A/D filter: -9.255963e+061 result=40 13:50:33 Get A/D value=-858993460 result=40 13:50:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:33 Aux= 13:50:33 Message to Camera, serial 89914 queued 13:50:41 Received message from Master: op=Shutter serial=89924 13:50:41 Shutter LASER close 13:50:42 Received message from Master: op=PointingHead serial=89928 13:50:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:50:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:50:42 Point started: ret=0 13:50:42 point_skyscan result=0 13:50:43 Check angles 13:50:43 SkyScan query 13:50:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 13:50:44 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 13:50:44 Check angles 13:50:44 SkyScan query 13:50:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 13:50:44 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 13:50:44 Check angles 13:50:44 SkyScan query 13:50:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.31<-18754 Statuses=0008 0009 13:50:45 Msec=1500 True Az=112.995 Ze=-101.31 Az status=0008 Ze status=0009 13:50:45 Check angles 13:50:45 SkyScan query 13:50:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.34<-17356 Statuses=0008 0009 13:50:46 Msec=2250 True Az=112.995 Ze=-80.34 Az status=0008 Ze status=0009 13:50:46 Check angles 13:50:46 SkyScan query 13:50:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.4<-15960 Statuses=0008 0009 13:50:47 Msec=3000 True Az=112.995 Ze=-59.4 Az status=0008 Ze status=0009 13:50:47 Check angles 13:50:47 SkyScan query 13:50:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.43<-14562 Statuses=0008 0009 13:50:47 Msec=3750 True Az=112.995 Ze=-38.43 Az status=0008 Ze status=0009 13:50:47 Check angles 13:50:47 SkyScan query 13:50:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.49<-13166 Statuses=0008 0009 13:50:48 Msec=4500 True Az=112.995 Ze=-17.49 Az status=0008 Ze status=0009 13:50:48 Check angles 13:50:48 SkyScan query 13:50:49 SkyScan query done: ret=0 az=112.995<-7533 ze=3.48<-11768 Statuses=0008 0009 13:50:49 Msec=5250 True Az=112.995 Ze=3.48 Az status=0008 Ze status=0009 13:50:49 Check angles 13:50:49 SkyScan query 13:50:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:50:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:50:50 Message to Master queued w/err=0: serial=89928 error=0 13:50:55 Received message from Master: op=Filter serial=89929 13:50:55 Color wheel filter change from 0 to 0 13:50:55 FLIGetFilterPos err=0 currentPosition=0 13:50:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:55 Filter is already there-color wheel unchanged 13:50:55 Received message from Master: op=Shutter serial=89930 13:50:55 Shutter LASER close 13:50:55 Received message from Camera: op=State serial=89932 13:50:55 GetSingleValue result=40 Value=cccccccc 13:50:55 SkyScan query 13:50:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:50:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:55 Parameters OK 13:50:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:55 Set A/D data flow result=40 13:50:55 Set A/D channel type result=40 13:50:55 Set A/D encoding result=40 13:50:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:55 Set channel filter=0.000000e+000 result=40 13:50:55 Config A/D Result=40 13:50:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:55 Get A/D filter: -9.255963e+061 result=40 13:50:55 Get A/D value=-858993460 result=40 13:50:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:55 Parameters OK 13:50:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:55 Set A/D data flow result=40 13:50:55 Set A/D channel type result=40 13:50:55 Set A/D encoding result=40 13:50:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:55 Set channel filter=0.000000e+000 result=40 13:50:55 Config A/D Result=40 13:50:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:55 Get A/D filter: -9.255963e+061 result=40 13:50:55 Get A/D value=-858993460 result=40 13:50:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:55 Aux= 13:50:55 Message to Camera, serial 89932 queued 13:51:32 Received message from Master: op=PointingHead serial=89945 13:51:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:51:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:51:33 Point started: ret=0 13:51:33 point_skyscan result=0 13:51:33 Check angles 13:51:33 SkyScan query 13:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:51:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:51:34 Message to Master queued w/err=0: serial=89945 error=0 13:51:39 Received message from Master: op=Filter serial=89946 13:51:39 Color wheel filter change from 0 to 0 13:51:39 FLIGetFilterPos err=0 currentPosition=0 13:51:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:39 Filter is already there-color wheel unchanged 13:51:39 Received message from Master: op=Shutter serial=89947 13:51:39 Shutter LASER close 13:51:39 Received message from Camera: op=State serial=89949 13:51:39 GetSingleValue result=40 Value=cccccccc 13:51:39 SkyScan query 13:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:51:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:40 Parameters OK 13:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:40 Set A/D data flow result=40 13:51:40 Set A/D channel type result=40 13:51:40 Set A/D encoding result=40 13:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:40 Set channel filter=0.000000e+000 result=40 13:51:40 Config A/D Result=40 13:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:40 Get A/D filter: -9.255963e+061 result=40 13:51:40 Get A/D value=-858993460 result=40 13:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:40 Parameters OK 13:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:40 Set A/D data flow result=40 13:51:40 Set A/D channel type result=40 13:51:40 Set A/D encoding result=40 13:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:40 Set channel filter=0.000000e+000 result=40 13:51:40 Config A/D Result=40 13:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:40 Get A/D filter: -9.255963e+061 result=40 13:51:40 Get A/D value=-858993460 result=40 13:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:40 Aux= 13:51:40 Message to Camera, serial 89949 queued 13:52:17 Received message from Master: op=PointingHead serial=89962 13:52:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:52:17 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:52:17 Point started: ret=0 13:52:17 point_skyscan result=0 13:52:18 Check angles 13:52:18 SkyScan query 13:52:18 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 13:52:18 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 13:52:19 Check angles 13:52:19 SkyScan query 13:52:19 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 13:52:19 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 13:52:19 Check angles 13:52:19 SkyScan query 13:52:20 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 13:52:20 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 13:52:20 Check angles 13:52:20 SkyScan query 13:52:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:52:21 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:52:21 Message to Master queued w/err=0: serial=89962 error=0 13:52:26 Received message from Master: op=Filter serial=89963 13:52:26 Color wheel filter change from 0 to 0 13:52:26 FLIGetFilterPos err=0 currentPosition=0 13:52:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:26 Filter is already there-color wheel unchanged 13:52:26 Received message from Master: op=Shutter serial=89964 13:52:26 Shutter LASER close 13:52:26 Received message from Camera: op=State serial=89966 13:52:26 GetSingleValue result=40 Value=cccccccc 13:52:26 SkyScan query 13:52:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:52:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:26 Parameters OK 13:52:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:26 Set A/D data flow result=40 13:52:26 Set A/D channel type result=40 13:52:26 Set A/D encoding result=40 13:52:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:26 Set channel filter=0.000000e+000 result=40 13:52:26 Config A/D Result=40 13:52:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:26 Get A/D filter: -9.255963e+061 result=40 13:52:26 Get A/D value=-858993460 result=40 13:52:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:26 Parameters OK 13:52:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:26 Set A/D data flow result=40 13:52:26 Set A/D channel type result=40 13:52:26 Set A/D encoding result=40 13:52:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:26 Set channel filter=0.000000e+000 result=40 13:52:26 Config A/D Result=40 13:52:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:26 Get A/D filter: -9.255963e+061 result=40 13:52:26 Get A/D value=-858993460 result=40 13:52:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:26 Aux= 13:52:26 Message to Camera, serial 89966 queued 13:53:03 Received message from Master: op=PointingHead serial=89979 13:53:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:53:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:53:04 Point started: ret=0 13:53:04 point_skyscan result=0 13:53:04 Check angles 13:53:04 SkyScan query 13:53:05 SkyScan query done: ret=0 az=152.43<-10162 ze=6.51<-11566 Statuses=0009 0008 13:53:05 Msec=0 True Az=152.43 Ze=6.51 Az status=0009 Ze status=0008 13:53:05 Check angles 13:53:05 SkyScan query 13:53:06 SkyScan query done: ret=0 az=134.955<-8997 ze=6.495<-11567 Statuses=0009 0008 13:53:06 Msec=750 True Az=134.955 Ze=6.495 Az status=0009 Ze status=0008 13:53:06 Check angles 13:53:06 SkyScan query 13:53:06 SkyScan query done: ret=0 az=117.585<-7839 ze=6.495<-11567 Statuses=0009 0008 13:53:06 Msec=1500 True Az=117.585 Ze=6.495 Az status=0009 Ze status=0008 13:53:07 Check angles 13:53:07 SkyScan query 13:53:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:53:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:53:07 Message to Master queued w/err=0: serial=89979 error=0 13:53:12 Received message from Master: op=Filter serial=89980 13:53:12 Color wheel filter change from 0 to 0 13:53:12 FLIGetFilterPos err=0 currentPosition=0 13:53:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:12 Filter is already there-color wheel unchanged 13:53:12 Received message from Master: op=Shutter serial=89981 13:53:12 Shutter LASER close 13:53:12 Received message from Camera: op=State serial=89983 13:53:12 GetSingleValue result=40 Value=cccccccc 13:53:12 SkyScan query 13:53:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:53:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:13 Parameters OK 13:53:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:13 Set A/D data flow result=40 13:53:13 Set A/D channel type result=40 13:53:13 Set A/D encoding result=40 13:53:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:13 Set channel filter=0.000000e+000 result=40 13:53:13 Config A/D Result=40 13:53:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:13 Get A/D filter: -9.255963e+061 result=40 13:53:13 Get A/D value=-858993460 result=40 13:53:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:13 Parameters OK 13:53:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:13 Set A/D data flow result=40 13:53:13 Set A/D channel type result=40 13:53:13 Set A/D encoding result=40 13:53:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:13 Set channel filter=0.000000e+000 result=40 13:53:13 Config A/D Result=40 13:53:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:13 Get A/D filter: -9.255963e+061 result=40 13:53:13 Get A/D value=-858993460 result=40 13:53:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:13 Aux= 13:53:13 Message to Camera, serial 89983 queued 13:53:50 Received message from Master: op=PointingHead serial=89996 13:53:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:53:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:53:50 Point started: ret=0 13:53:50 point_skyscan result=0 13:53:51 Check angles 13:53:51 SkyScan query 13:53:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 13:53:51 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 13:53:52 Check angles 13:53:52 SkyScan query 13:53:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 13:53:52 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 13:53:52 Check angles 13:53:52 SkyScan query 13:53:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 13:53:53 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 13:53:53 Check angles 13:53:53 SkyScan query 13:53:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.58<-17772 Statuses=0008 0009 13:53:54 Msec=2250 True Az=112.995 Ze=-86.58 Az status=0008 Ze status=0009 13:53:54 Check angles 13:53:54 SkyScan query 13:53:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 13:53:54 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 13:53:55 Check angles 13:53:55 SkyScan query 13:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.895<-20593 Statuses=0008 0009 13:53:55 Msec=3750 True Az=112.995 Ze=-128.895 Az status=0008 Ze status=0009 13:53:55 Check angles 13:53:55 SkyScan query 13:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.865<-21991 Statuses=0008 0009 13:53:56 Msec=4500 True Az=112.995 Ze=-149.865 Az status=0008 Ze status=0009 13:53:56 Check angles 13:53:56 SkyScan query 13:53:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0008 0009 13:53:57 Msec=5250 True Az=112.995 Ze=-171.105 Az status=0008 Ze status=0009 13:53:57 Check angles 13:53:57 SkyScan query 13:53:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:53:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:53:58 Message to Master queued w/err=0: serial=89996 error=0 13:54:03 Received message from Master: op=Filter serial=89997 13:54:03 Color wheel filter change from 0 to 0 13:54:03 FLIGetFilterPos err=0 currentPosition=0 13:54:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:03 Filter is already there-color wheel unchanged 13:54:03 Received message from Master: op=Shutter serial=89998 13:54:03 Shutter LASER open 13:54:03 Received message from Camera: op=State serial=90000 13:54:03 GetSingleValue result=40 Value=cccccccc 13:54:03 SkyScan query 13:54:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:54:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:03 Parameters OK 13:54:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:03 Set A/D data flow result=40 13:54:03 Set A/D channel type result=40 13:54:03 Set A/D encoding result=40 13:54:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:03 Set channel filter=0.000000e+000 result=40 13:54:03 Config A/D Result=40 13:54:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:03 Get A/D filter: -9.255963e+061 result=40 13:54:03 Get A/D value=-858993460 result=40 13:54:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:03 Parameters OK 13:54:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:03 Set A/D data flow result=40 13:54:03 Set A/D channel type result=40 13:54:03 Set A/D encoding result=40 13:54:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:03 Set channel filter=0.000000e+000 result=40 13:54:03 Config A/D Result=40 13:54:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:03 Get A/D filter: -9.255963e+061 result=40 13:54:03 Get A/D value=-858993460 result=40 13:54:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:03 Aux= 13:54:03 Message to Camera, serial 90000 queued 13:54:12 Received message from Master: op=Shutter serial=90010 13:54:12 Shutter LASER close 13:54:12 Received message from Master: op=PointingHead serial=90014 13:54:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:54:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:54:13 Point started: ret=0 13:54:13 point_skyscan result=0 13:54:13 Check angles 13:54:13 SkyScan query 13:54:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 13:54:14 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 [UTC 2019-3-3 13:54:14] 13:54:14 Check angles 13:54:14 SkyScan query 13:54:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-120.63<-20042 Statuses=0008 0009 13:54:15 Msec=750 True Az=112.995 Ze=-120.63 Az status=0008 Ze status=0009 13:54:15 Check angles 13:54:15 SkyScan query 13:54:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 13:54:15 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 13:54:16 Check angles 13:54:16 SkyScan query 13:54:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 13:54:16 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 13:54:16 Check angles 13:54:16 SkyScan query 13:54:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.115<-15941 Statuses=0008 0009 13:54:17 Msec=3000 True Az=112.995 Ze=-59.115 Az status=0008 Ze status=0009 13:54:17 Check angles 13:54:17 SkyScan query 13:54:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 13:54:18 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 13:54:18 Check angles 13:54:18 SkyScan query 13:54:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.175<-13145 Statuses=0008 0009 13:54:18 Msec=4500 True Az=112.995 Ze=-17.175 Az status=0008 Ze status=0009 13:54:19 Check angles 13:54:19 SkyScan query 13:54:19 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 13:54:19 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 13:54:19 Check angles 13:54:19 SkyScan query 13:54:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:54:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:54:20 Message to Master queued w/err=0: serial=90014 error=0 13:54:25 Received message from Master: op=Filter serial=90015 13:54:25 Color wheel filter change from 0 to 0 13:54:25 FLIGetFilterPos err=0 currentPosition=0 13:54:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:25 Filter is already there-color wheel unchanged 13:54:25 Received message from Master: op=Shutter serial=90016 13:54:25 Shutter LASER close 13:54:25 Received message from Camera: op=State serial=90018 13:54:25 GetSingleValue result=40 Value=cccccccc 13:54:25 SkyScan query 13:54:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:54:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:26 Parameters OK 13:54:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:26 Set A/D data flow result=40 13:54:26 Set A/D channel type result=40 13:54:26 Set A/D encoding result=40 13:54:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:26 Set channel filter=0.000000e+000 result=40 13:54:26 Config A/D Result=40 13:54:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:26 Get A/D filter: -9.255963e+061 result=40 13:54:26 Get A/D value=-858993460 result=40 13:54:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:26 Parameters OK 13:54:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:26 Set A/D data flow result=40 13:54:26 Set A/D channel type result=40 13:54:26 Set A/D encoding result=40 13:54:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:26 Set channel filter=0.000000e+000 result=40 13:54:26 Config A/D Result=40 13:54:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:26 Get A/D filter: -9.255963e+061 result=40 13:54:26 Get A/D value=-858993460 result=40 13:54:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:26 Aux= 13:54:26 Message to Camera, serial 90018 queued 13:55:03 Received message from Master: op=PointingHead serial=90031 13:55:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:55:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:55:03 Point started: ret=0 13:55:03 point_skyscan result=0 13:55:04 Check angles 13:55:04 SkyScan query 13:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:55:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:55:04 Message to Master queued w/err=0: serial=90031 error=0 13:55:09 Received message from Master: op=Filter serial=90032 13:55:09 Color wheel filter change from 0 to 0 13:55:09 FLIGetFilterPos err=0 currentPosition=0 13:55:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:09 Filter is already there-color wheel unchanged 13:55:10 Received message from Master: op=Shutter serial=90033 13:55:10 Shutter LASER close 13:55:10 Received message from Camera: op=State serial=90035 13:55:10 GetSingleValue result=40 Value=cccccccc 13:55:10 SkyScan query 13:55:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:55:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:10 Parameters OK 13:55:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:10 Set A/D data flow result=40 13:55:10 Set A/D channel type result=40 13:55:10 Set A/D encoding result=40 13:55:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:10 Set channel filter=0.000000e+000 result=40 13:55:10 Config A/D Result=40 13:55:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:10 Get A/D filter: -9.255963e+061 result=40 13:55:10 Get A/D value=-858993460 result=40 13:55:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:10 Parameters OK 13:55:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:10 Set A/D data flow result=40 13:55:10 Set A/D channel type result=40 13:55:10 Set A/D encoding result=40 13:55:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:10 Set channel filter=0.000000e+000 result=40 13:55:10 Config A/D Result=40 13:55:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:10 Get A/D filter: -9.255963e+061 result=40 13:55:10 Get A/D value=-858993460 result=40 13:55:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:10 Aux= 13:55:10 Message to Camera, serial 90035 queued 13:55:47 Received message from Master: op=PointingHead serial=90048 13:55:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:55:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:55:47 Point started: ret=0 13:55:47 point_skyscan result=0 13:55:48 Check angles 13:55:48 SkyScan query 13:55:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:55:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:55:49 Message to Master queued w/err=0: serial=90048 error=0 13:55:54 Received message from Master: op=Filter serial=90049 13:55:54 Color wheel filter change from 0 to 0 13:55:54 FLIGetFilterPos err=0 currentPosition=0 13:55:54 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:54 Filter is already there-color wheel unchanged 13:55:54 Received message from Master: op=Shutter serial=90050 13:55:54 Shutter LASER close 13:55:54 Received message from Camera: op=State serial=90052 13:55:54 GetSingleValue result=40 Value=cccccccc 13:55:54 SkyScan query 13:55:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:55:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:55 Parameters OK 13:55:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:55 Set A/D data flow result=40 13:55:55 Set A/D channel type result=40 13:55:55 Set A/D encoding result=40 13:55:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:55 Set channel filter=0.000000e+000 result=40 13:55:55 Config A/D Result=40 13:55:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:55 Get A/D filter: -9.255963e+061 result=40 13:55:55 Get A/D value=-858993460 result=40 13:55:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:55 Parameters OK 13:55:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:55 Set A/D data flow result=40 13:55:55 Set A/D channel type result=40 13:55:55 Set A/D encoding result=40 13:55:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:55 Set channel filter=0.000000e+000 result=40 13:55:55 Config A/D Result=40 13:55:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:55 Get A/D filter: -9.255963e+061 result=40 13:55:55 Get A/D value=-858993460 result=40 13:55:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:55 Aux= 13:55:55 Message to Camera, serial 90052 queued 13:56:31 Received message from Master: op=PointingHead serial=90065 13:56:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:56:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:56:32 Point started: ret=0 13:56:32 point_skyscan result=0 13:56:32 Check angles 13:56:32 SkyScan query 13:56:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:56:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:56:33 Message to Master queued w/err=0: serial=90065 error=0 13:56:38 Received message from Master: op=Filter serial=90066 13:56:38 Color wheel filter change from 0 to 0 13:56:38 FLIGetFilterPos err=0 currentPosition=0 13:56:38 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:38 Filter is already there-color wheel unchanged 13:56:38 Received message from Master: op=Shutter serial=90067 13:56:38 Shutter LASER close 13:56:38 Received message from Camera: op=State serial=90069 13:56:38 GetSingleValue result=40 Value=cccccccc 13:56:38 SkyScan query 13:56:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:56:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:39 Parameters OK 13:56:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:39 Set A/D data flow result=40 13:56:39 Set A/D channel type result=40 13:56:39 Set A/D encoding result=40 13:56:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:39 Set channel filter=0.000000e+000 result=40 13:56:39 Config A/D Result=40 13:56:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:39 Get A/D filter: -9.255963e+061 result=40 13:56:39 Get A/D value=-858993460 result=40 13:56:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:39 Parameters OK 13:56:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:39 Set A/D data flow result=40 13:56:39 Set A/D channel type result=40 13:56:39 Set A/D encoding result=40 13:56:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:39 Set channel filter=0.000000e+000 result=40 13:56:39 Config A/D Result=40 13:56:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:39 Get A/D filter: -9.255963e+061 result=40 13:56:39 Get A/D value=-858993460 result=40 13:56:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:39 Aux= 13:56:39 Message to Camera, serial 90069 queued 13:57:16 Received message from Master: op=PointingHead serial=90082 13:57:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:57:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:57:16 Point started: ret=0 13:57:16 point_skyscan result=0 13:57:17 Check angles 13:57:17 SkyScan query 13:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 13:57:17 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 13:57:18 Check angles 13:57:18 SkyScan query 13:57:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.165<-15011 Statuses=0008 0009 13:57:18 Msec=750 True Az=112.995 Ze=-45.165 Az status=0008 Ze status=0009 13:57:18 Check angles 13:57:18 SkyScan query 13:57:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.12<-16408 Statuses=0008 0009 13:57:19 Msec=1500 True Az=112.995 Ze=-66.12 Az status=0008 Ze status=0009 13:57:19 Check angles 13:57:19 SkyScan query 13:57:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.51<-17834 Statuses=0008 0009 13:57:20 Msec=2250 True Az=112.995 Ze=-87.51 Az status=0008 Ze status=0009 13:57:20 Check angles 13:57:20 SkyScan query 13:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.855<-19257 Statuses=0008 0009 13:57:21 Msec=3000 True Az=112.995 Ze=-108.855 Az status=0008 Ze status=0009 13:57:21 Check angles 13:57:21 SkyScan query 13:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-130.275<-20685 Statuses=0008 0009 13:57:21 Msec=3750 True Az=112.995 Ze=-130.275 Az status=0008 Ze status=0009 13:57:21 Check angles 13:57:21 SkyScan query 13:57:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.2<-22080 Statuses=0008 0009 13:57:22 Msec=4500 True Az=112.995 Ze=-151.2 Az status=0008 Ze status=0009 13:57:22 Check angles 13:57:22 SkyScan query 13:57:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.75<-23450 Statuses=0008 0009 13:57:23 Msec=5250 True Az=112.995 Ze=-171.75 Az status=0008 Ze status=0009 13:57:23 Check angles 13:57:23 SkyScan query 13:57:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:57:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:57:24 Message to Master queued w/err=0: serial=90082 error=0 13:57:29 Received message from Master: op=Filter serial=90083 13:57:29 Color wheel filter change from 0 to 0 13:57:29 FLIGetFilterPos err=0 currentPosition=0 13:57:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:29 Filter is already there-color wheel unchanged 13:57:29 Received message from Master: op=Shutter serial=90084 13:57:29 Shutter LASER open 13:57:29 Received message from Camera: op=State serial=90086 13:57:29 GetSingleValue result=40 Value=cccccccc 13:57:29 SkyScan query 13:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:57:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:29 Parameters OK 13:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:29 Set A/D data flow result=40 13:57:29 Set A/D channel type result=40 13:57:29 Set A/D encoding result=40 13:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:29 Set channel filter=0.000000e+000 result=40 13:57:29 Config A/D Result=40 13:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:29 Get A/D filter: -9.255963e+061 result=40 13:57:29 Get A/D value=-858993460 result=40 13:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:29 Parameters OK 13:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:29 Set A/D data flow result=40 13:57:29 Set A/D channel type result=40 13:57:29 Set A/D encoding result=40 13:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:29 Set channel filter=0.000000e+000 result=40 13:57:29 Config A/D Result=40 13:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:29 Get A/D filter: -9.255963e+061 result=40 13:57:29 Get A/D value=-858993460 result=40 13:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:29 Aux= 13:57:29 Message to Camera, serial 90086 queued 13:57:38 Received message from Master: op=Shutter serial=90096 13:57:38 Shutter LASER close 13:57:38 Received message from Master: op=PointingHead serial=90100 13:57:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:57:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:57:39 Point started: ret=0 13:57:39 point_skyscan result=0 13:57:40 Check angles 13:57:40 SkyScan query 13:57:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 13:57:40 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 13:57:40 Check angles 13:57:40 SkyScan query 13:57:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 13:57:41 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 13:57:41 Check angles 13:57:41 SkyScan query 13:57:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 13:57:42 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 13:57:42 Check angles 13:57:42 SkyScan query 13:57:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.4<-17360 Statuses=0008 0009 13:57:42 Msec=2250 True Az=112.995 Ze=-80.4 Az status=0008 Ze status=0009 13:57:43 Check angles 13:57:43 SkyScan query 13:57:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 13:57:43 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 13:57:43 Check angles 13:57:43 SkyScan query 13:57:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.055<-14537 Statuses=0008 0009 13:57:44 Msec=3750 True Az=112.995 Ze=-38.055 Az status=0008 Ze status=0009 13:57:44 Check angles 13:57:44 SkyScan query 13:57:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 13:57:45 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 13:57:45 Check angles 13:57:45 SkyScan query 13:57:45 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 13:57:45 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 13:57:46 Check angles 13:57:46 SkyScan query 13:57:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:57:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:57:46 Message to Master queued w/err=0: serial=90100 error=0 13:57:51 Received message from Master: op=Filter serial=90101 13:57:51 Color wheel filter change from 0 to 0 13:57:51 FLIGetFilterPos err=0 currentPosition=0 13:57:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:51 Filter is already there-color wheel unchanged 13:57:51 Received message from Master: op=Shutter serial=90102 13:57:51 Shutter LASER close 13:57:52 Received message from Camera: op=State serial=90104 13:57:52 GetSingleValue result=40 Value=cccccccc 13:57:52 SkyScan query 13:57:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:57:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:52 Parameters OK 13:57:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:52 Set A/D data flow result=40 13:57:52 Set A/D channel type result=40 13:57:52 Set A/D encoding result=40 13:57:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:52 Set channel filter=0.000000e+000 result=40 13:57:52 Config A/D Result=40 13:57:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:52 Get A/D filter: -9.255963e+061 result=40 13:57:52 Get A/D value=-858993460 result=40 13:57:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:52 Parameters OK 13:57:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:52 Set A/D data flow result=40 13:57:52 Set A/D channel type result=40 13:57:52 Set A/D encoding result=40 13:57:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:52 Set channel filter=0.000000e+000 result=40 13:57:52 Config A/D Result=40 13:57:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:52 Get A/D filter: -9.255963e+061 result=40 13:57:52 Get A/D value=-858993460 result=40 13:57:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:52 Aux= 13:57:52 Message to Camera, serial 90104 queued 13:58:29 Received message from Master: op=PointingHead serial=90117 13:58:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:58:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:58:29 Point started: ret=0 13:58:29 point_skyscan result=0 13:58:30 Check angles 13:58:30 SkyScan query 13:58:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:58:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:58:31 Message to Master queued w/err=0: serial=90117 error=0 13:58:36 Received message from Master: op=Filter serial=90118 13:58:36 Color wheel filter change from 0 to 0 13:58:36 FLIGetFilterPos err=0 currentPosition=0 13:58:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:36 Filter is already there-color wheel unchanged 13:58:36 Received message from Master: op=Shutter serial=90119 13:58:36 Shutter LASER close 13:58:36 Received message from Camera: op=State serial=90121 13:58:36 GetSingleValue result=40 Value=cccccccc 13:58:36 SkyScan query 13:58:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:58:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:36 Parameters OK 13:58:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:36 Set A/D data flow result=40 13:58:36 Set A/D channel type result=40 13:58:36 Set A/D encoding result=40 13:58:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:36 Set channel filter=0.000000e+000 result=40 13:58:36 Config A/D Result=40 13:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:36 Get A/D filter: -9.255963e+061 result=40 13:58:36 Get A/D value=-858993460 result=40 13:58:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:36 Parameters OK 13:58:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:36 Set A/D data flow result=40 13:58:36 Set A/D channel type result=40 13:58:36 Set A/D encoding result=40 13:58:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:36 Set channel filter=0.000000e+000 result=40 13:58:36 Config A/D Result=40 13:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:36 Get A/D filter: -9.255963e+061 result=40 13:58:36 Get A/D value=-858993460 result=40 13:58:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:36 Aux= 13:58:36 Message to Camera, serial 90121 queued 13:59:13 Received message from Master: op=PointingHead serial=90134 13:59:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:59:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:59:14 Point started: ret=0 13:59:14 point_skyscan result=0 13:59:14 Check angles 13:59:14 SkyScan query 13:59:15 SkyScan query done: ret=0 az=135.675<-9045 ze=-6.51<-12434 Statuses=0009 0008 13:59:15 Msec=0 True Az=135.675 Ze=-6.51 Az status=0009 Ze status=0008 13:59:15 Check angles 13:59:15 SkyScan query 13:59:16 SkyScan query done: ret=0 az=153.18<-10212 ze=-6.495<-12433 Statuses=0009 0008 13:59:16 Msec=750 True Az=153.18 Ze=-6.495 Az status=0009 Ze status=0008 13:59:16 Check angles 13:59:16 SkyScan query 13:59:16 SkyScan query done: ret=0 az=171<-11400 ze=-6.495<-12433 Statuses=0009 0008 13:59:16 Msec=1500 True Az=171 Ze=-6.495 Az status=0009 Ze status=0008 13:59:17 Check angles 13:59:17 SkyScan query 13:59:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:59:17 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:59:17 Message to Master queued w/err=0: serial=90134 error=0 13:59:22 Received message from Master: op=Filter serial=90135 13:59:22 Color wheel filter change from 0 to 0 13:59:22 FLIGetFilterPos err=0 currentPosition=0 13:59:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:22 Filter is already there-color wheel unchanged 13:59:22 Received message from Master: op=Shutter serial=90136 13:59:22 Shutter LASER close 13:59:22 Received message from Camera: op=State serial=90138 13:59:22 GetSingleValue result=40 Value=cccccccc 13:59:22 SkyScan query 13:59:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:59:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:23 Parameters OK 13:59:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:23 Set A/D data flow result=40 13:59:23 Set A/D channel type result=40 13:59:23 Set A/D encoding result=40 13:59:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:23 Set channel filter=0.000000e+000 result=40 13:59:23 Config A/D Result=40 13:59:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:23 Get A/D filter: -9.255963e+061 result=40 13:59:23 Get A/D value=-858993460 result=40 13:59:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:23 Parameters OK 13:59:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:23 Set A/D data flow result=40 13:59:23 Set A/D channel type result=40 13:59:23 Set A/D encoding result=40 13:59:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:23 Set channel filter=0.000000e+000 result=40 13:59:23 Config A/D Result=40 13:59:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:23 Get A/D filter: -9.255963e+061 result=40 13:59:23 Get A/D value=-858993460 result=40 13:59:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:23 Aux= 13:59:23 Message to Camera, serial 90138 queued 14:00:00 Received message from Master: op=PointingHead serial=90151 14:00:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:00:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:00:00 Point started: ret=0 14:00:00 point_skyscan result=0 14:00:01 Check angles 14:00:01 SkyScan query 14:00:01 SkyScan query done: ret=0 az=153.195<-10213 ze=6.51<-11566 Statuses=0009 0008 14:00:01 Msec=0 True Az=153.195 Ze=6.51 Az status=0009 Ze status=0008 14:00:02 Check angles 14:00:02 SkyScan query 14:00:02 SkyScan query done: ret=0 az=135.705<-9047 ze=6.495<-11567 Statuses=0009 0008 14:00:02 Msec=750 True Az=135.705 Ze=6.495 Az status=0009 Ze status=0008 14:00:02 Check angles 14:00:02 SkyScan query 14:00:03 SkyScan query done: ret=0 az=118.26<-7884 ze=6.495<-11567 Statuses=0009 0008 14:00:03 Msec=1500 True Az=118.26 Ze=6.495 Az status=0009 Ze status=0008 14:00:03 Check angles 14:00:03 SkyScan query 14:00:04 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 14:00:04 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 14:00:04 Message to Master queued w/err=0: serial=90151 error=0 14:00:09 Received message from Master: op=Filter serial=90152 14:00:09 Color wheel filter change from 0 to 0 14:00:09 FLIGetFilterPos err=0 currentPosition=0 14:00:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:09 Filter is already there-color wheel unchanged 14:00:09 Received message from Master: op=Shutter serial=90153 14:00:09 Shutter LASER close 14:00:09 Received message from Camera: op=State serial=90155 14:00:09 GetSingleValue result=40 Value=cccccccc 14:00:09 SkyScan query 14:00:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:00:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:09 Parameters OK 14:00:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:09 Set A/D data flow result=40 14:00:09 Set A/D channel type result=40 14:00:09 Set A/D encoding result=40 14:00:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:09 Set channel filter=0.000000e+000 result=40 14:00:09 Config A/D Result=40 14:00:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:09 Get A/D filter: -9.255963e+061 result=40 14:00:09 Get A/D value=-858993460 result=40 14:00:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:09 Parameters OK 14:00:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:09 Set A/D data flow result=40 14:00:09 Set A/D channel type result=40 14:00:09 Set A/D encoding result=40 14:00:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:09 Set channel filter=0.000000e+000 result=40 14:00:09 Config A/D Result=40 14:00:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:09 Get A/D filter: -9.255963e+061 result=40 14:00:09 Get A/D value=-858993460 result=40 14:00:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:09 Aux= 14:00:09 Message to Camera, serial 90155 queued 14:00:46 Received message from Master: op=PointingHead serial=90168 14:00:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:00:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:00:47 Point started: ret=0 14:00:47 point_skyscan result=0 14:00:47 Check angles 14:00:47 SkyScan query 14:00:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 14:00:48 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 14:00:48 Check angles 14:00:48 SkyScan query 14:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 14:00:49 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 14:00:49 Check angles 14:00:49 SkyScan query 14:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 14:00:49 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 14:00:50 Check angles 14:00:50 SkyScan query 14:00:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.175<-17745 Statuses=0008 0009 14:00:50 Msec=2250 True Az=112.995 Ze=-86.175 Az status=0008 Ze status=0009 14:00:50 Check angles 14:00:50 SkyScan query 14:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.1<-19140 Statuses=0008 0009 14:00:51 Msec=3000 True Az=112.995 Ze=-107.1 Az status=0008 Ze status=0009 14:00:51 Check angles 14:00:51 SkyScan query 14:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.07<-20538 Statuses=0008 0009 14:00:52 Msec=3750 True Az=112.995 Ze=-128.07 Az status=0008 Ze status=0009 14:00:52 Check angles 14:00:52 SkyScan query 14:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.01<-21934 Statuses=0008 0009 14:00:52 Msec=4500 True Az=112.995 Ze=-149.01 Az status=0008 Ze status=0009 14:00:53 Check angles 14:00:53 SkyScan query 14:00:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.385<-23359 Statuses=0008 0009 14:00:53 Msec=5250 True Az=112.995 Ze=-170.385 Az status=0008 Ze status=0009 14:00:53 Check angles 14:00:53 SkyScan query 14:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:00:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:00:54 Message to Master queued w/err=0: serial=90168 error=0 14:00:59 Received message from Master: op=Filter serial=90169 14:00:59 Color wheel filter change from 0 to 0 14:00:59 FLIGetFilterPos err=0 currentPosition=0 14:00:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:59 Filter is already there-color wheel unchanged 14:00:59 Received message from Master: op=Shutter serial=90170 14:00:59 Shutter LASER open 14:00:59 Received message from Camera: op=State serial=90172 14:00:59 GetSingleValue result=40 Value=cccccccc 14:00:59 SkyScan query 14:01:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:01:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:00 Parameters OK 14:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:00 Set A/D data flow result=40 14:01:00 Set A/D channel type result=40 14:01:00 Set A/D encoding result=40 14:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:00 Set channel filter=0.000000e+000 result=40 14:01:00 Config A/D Result=40 14:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:00 Get A/D filter: -9.255963e+061 result=40 14:01:00 Get A/D value=-858993460 result=40 14:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:00 Parameters OK 14:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:00 Set A/D data flow result=40 14:01:00 Set A/D channel type result=40 14:01:00 Set A/D encoding result=40 14:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:00 Set channel filter=0.000000e+000 result=40 14:01:00 Config A/D Result=40 14:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:00 Get A/D filter: -9.255963e+061 result=40 14:01:00 Get A/D value=-858993460 result=40 14:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:00 Aux= 14:01:00 Message to Camera, serial 90172 queued 14:01:08 Received message from Master: op=Shutter serial=90182 14:01:08 Shutter LASER close 14:01:09 Received message from Master: op=PointingHead serial=90186 14:01:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:01:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:01:09 Point started: ret=0 14:01:09 point_skyscan result=0 14:01:10 Check angles 14:01:10 SkyScan query 14:01:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 14:01:10 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 14:01:11 Check angles 14:01:11 SkyScan query 14:01:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 14:01:11 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 14:01:11 Check angles 14:01:11 SkyScan query 14:01:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.58<-18772 Statuses=0008 0009 14:01:12 Msec=1500 True Az=112.995 Ze=-101.58 Az status=0008 Ze status=0009 14:01:12 Check angles 14:01:12 SkyScan query 14:01:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.61<-17374 Statuses=0008 0009 14:01:13 Msec=2250 True Az=112.995 Ze=-80.61 Az status=0008 Ze status=0009 14:01:13 Check angles 14:01:13 SkyScan query 14:01:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.67<-15978 Statuses=0008 0009 14:01:13 Msec=3000 True Az=112.995 Ze=-59.67 Az status=0008 Ze status=0009 14:01:14 Check angles 14:01:14 SkyScan query 14:01:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.715<-14581 Statuses=0008 0009 14:01:14 Msec=3750 True Az=112.995 Ze=-38.715 Az status=0008 Ze status=0009 14:01:14 Check angles 14:01:14 SkyScan query 14:01:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.745<-13183 Statuses=0008 0009 14:01:15 Msec=4500 True Az=112.995 Ze=-17.745 Az status=0008 Ze status=0009 14:01:15 Check angles 14:01:15 SkyScan query 14:01:16 SkyScan query done: ret=0 az=112.995<-7533 ze=3.195<-11787 Statuses=0008 0009 14:01:16 Msec=5250 True Az=112.995 Ze=3.195 Az status=0008 Ze status=0009 14:01:16 Check angles 14:01:16 SkyScan query 14:01:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:01:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:01:16 Message to Master queued w/err=0: serial=90186 error=0 14:01:21 Received message from Master: op=Filter serial=90187 14:01:21 Color wheel filter change from 0 to 0 14:01:21 FLIGetFilterPos err=0 currentPosition=0 14:01:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:21 Filter is already there-color wheel unchanged 14:01:22 Received message from Master: op=Shutter serial=90188 14:01:22 Shutter LASER close 14:01:22 Received message from Camera: op=State serial=90190 14:01:22 GetSingleValue result=40 Value=cccccccc 14:01:22 SkyScan query 14:01:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:01:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:22 Parameters OK 14:01:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:22 Set A/D data flow result=40 14:01:22 Set A/D channel type result=40 14:01:22 Set A/D encoding result=40 14:01:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:22 Set channel filter=0.000000e+000 result=40 14:01:22 Config A/D Result=40 14:01:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:22 Get A/D filter: -9.255963e+061 result=40 14:01:22 Get A/D value=-858993460 result=40 14:01:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:22 Parameters OK 14:01:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:22 Set A/D data flow result=40 14:01:22 Set A/D channel type result=40 14:01:22 Set A/D encoding result=40 14:01:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:22 Set channel filter=0.000000e+000 result=40 14:01:22 Config A/D Result=40 14:01:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:22 Get A/D filter: -9.255963e+061 result=40 14:01:22 Get A/D value=-858993460 result=40 14:01:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:22 Aux= 14:01:22 Message to Camera, serial 90190 queued 14:01:58 Received message from Master: op=PointingHead serial=90202 14:01:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:01:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:01:59 Point started: ret=0 14:01:59 point_skyscan result=0 14:01:59 Check angles 14:01:59 SkyScan query 14:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:02:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:02:00 Message to Master queued w/err=0: serial=90202 error=0 14:02:05 Received message from Master: op=Filter serial=90203 14:02:05 Color wheel filter change from 0 to 0 14:02:05 FLIGetFilterPos err=0 currentPosition=0 14:02:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:05 Filter is already there-color wheel unchanged 14:02:05 Received message from Master: op=Shutter serial=90204 14:02:05 Shutter LASER close 14:02:05 Received message from Camera: op=State serial=90206 14:02:05 GetSingleValue result=40 Value=cccccccc 14:02:05 SkyScan query 14:02:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:02:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:06 Parameters OK 14:02:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:06 Set A/D data flow result=40 14:02:06 Set A/D channel type result=40 14:02:06 Set A/D encoding result=40 14:02:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:06 Set channel filter=0.000000e+000 result=40 14:02:06 Config A/D Result=40 14:02:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:06 Get A/D filter: -9.255963e+061 result=40 14:02:06 Get A/D value=-858993460 result=40 14:02:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:06 Parameters OK 14:02:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:06 Set A/D data flow result=40 14:02:06 Set A/D channel type result=40 14:02:06 Set A/D encoding result=40 14:02:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:06 Set channel filter=0.000000e+000 result=40 14:02:06 Config A/D Result=40 14:02:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:06 Get A/D filter: -9.255963e+061 result=40 14:02:06 Get A/D value=-858993460 result=40 14:02:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:06 Aux= 14:02:06 Message to Camera, serial 90206 queued 14:02:43 Received message from Master: op=PointingHead serial=90219 14:02:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:02:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:02:43 Point started: ret=0 14:02:43 point_skyscan result=0 14:02:44 Check angles 14:02:44 SkyScan query 14:02:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:02:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:02:44 Message to Master queued w/err=0: serial=90219 error=0 14:02:49 Received message from Master: op=Filter serial=90220 14:02:49 Color wheel filter change from 0 to 0 14:02:49 FLIGetFilterPos err=0 currentPosition=0 14:02:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:49 Filter is already there-color wheel unchanged 14:02:49 Received message from Master: op=Shutter serial=90221 14:02:49 Shutter LASER close 14:02:49 Received message from Camera: op=State serial=90223 14:02:49 GetSingleValue result=40 Value=cccccccc 14:02:49 SkyScan query 14:02:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:02:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:50 Parameters OK 14:02:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:50 Set A/D data flow result=40 14:02:50 Set A/D channel type result=40 14:02:50 Set A/D encoding result=40 14:02:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:50 Set channel filter=0.000000e+000 result=40 14:02:50 Config A/D Result=40 14:02:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:50 Get A/D filter: -9.255963e+061 result=40 14:02:50 Get A/D value=-858993460 result=40 14:02:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:50 Parameters OK 14:02:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:50 Set A/D data flow result=40 14:02:50 Set A/D channel type result=40 14:02:50 Set A/D encoding result=40 14:02:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:50 Set channel filter=0.000000e+000 result=40 14:02:50 Config A/D Result=40 14:02:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:50 Get A/D filter: -9.255963e+061 result=40 14:02:50 Get A/D value=-858993460 result=40 14:02:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:50 Aux= 14:02:50 Message to Camera, serial 90223 queued 14:03:27 Received message from Master: op=PointingHead serial=90236 14:03:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:03:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:03:27 Point started: ret=0 14:03:27 point_skyscan result=0 14:03:28 Check angles 14:03:28 SkyScan query 14:03:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:03:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:03:28 Message to Master queued w/err=0: serial=90236 error=0 14:03:33 Received message from Master: op=Filter serial=90237 14:03:33 Color wheel filter change from 0 to 0 14:03:33 FLIGetFilterPos err=0 currentPosition=0 14:03:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:33 Filter is already there-color wheel unchanged 14:03:34 Received message from Master: op=Shutter serial=90238 14:03:34 Shutter LASER close 14:03:34 Received message from Camera: op=State serial=90240 14:03:34 GetSingleValue result=40 Value=cccccccc 14:03:34 SkyScan query 14:03:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:03:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:34 Parameters OK 14:03:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:34 Set A/D data flow result=40 14:03:34 Set A/D channel type result=40 14:03:34 Set A/D encoding result=40 14:03:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:34 Set channel filter=0.000000e+000 result=40 14:03:34 Config A/D Result=40 14:03:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:34 Get A/D filter: -9.255963e+061 result=40 14:03:34 Get A/D value=-858993460 result=40 14:03:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:34 Parameters OK 14:03:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:34 Set A/D data flow result=40 14:03:34 Set A/D channel type result=40 14:03:34 Set A/D encoding result=40 14:03:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:34 Set channel filter=0.000000e+000 result=40 14:03:34 Config A/D Result=40 14:03:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:34 Get A/D filter: -9.255963e+061 result=40 14:03:34 Get A/D value=-858993460 result=40 14:03:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:34 Aux= 14:03:34 Message to Camera, serial 90240 queued 14:03:38 Received message from Master: op=Identify serial=90241 [UTC 2019-3-3 14:03:50] 14:04:11 Received message from Master: op=PointingHead serial=90256 14:04:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:04:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:04:11 Point started: ret=0 14:04:11 point_skyscan result=0 14:04:12 Check angles 14:04:12 SkyScan query 14:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 14:04:13 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 14:04:13 Check angles 14:04:13 SkyScan query 14:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 14:04:14 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 14:04:14 Check angles 14:04:14 SkyScan query 14:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 14:04:14 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 14:04:14 Check angles 14:04:14 SkyScan query 14:04:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.895<-17793 Statuses=0008 0009 14:04:15 Msec=2250 True Az=112.995 Ze=-86.895 Az status=0008 Ze status=0009 14:04:15 Check angles 14:04:15 SkyScan query 14:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.85<-19190 Statuses=0008 0009 14:04:16 Msec=3000 True Az=112.995 Ze=-107.85 Az status=0008 Ze status=0009 14:04:16 Check angles 14:04:16 SkyScan query 14:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.79<-20586 Statuses=0008 0009 14:04:17 Msec=3750 True Az=112.995 Ze=-128.79 Az status=0008 Ze status=0009 14:04:17 Check angles 14:04:17 SkyScan query 14:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.195<-22013 Statuses=0008 0009 14:04:17 Msec=4500 True Az=112.995 Ze=-150.195 Az status=0008 Ze status=0009 14:04:17 Check angles 14:04:17 SkyScan query 14:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 14:04:18 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 14:04:18 Check angles 14:04:18 SkyScan query 14:04:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:04:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:04:19 Message to Master queued w/err=0: serial=90256 error=0 14:04:24 Received message from Master: op=Filter serial=90257 14:04:24 Color wheel filter change from 0 to 0 14:04:24 FLIGetFilterPos err=0 currentPosition=0 14:04:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:24 Filter is already there-color wheel unchanged 14:04:24 Received message from Master: op=Shutter serial=90258 14:04:24 Shutter LASER open 14:04:24 Received message from Camera: op=State serial=90260 14:04:24 GetSingleValue result=40 Value=cccccccc 14:04:24 SkyScan query 14:04:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:04:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:25 Parameters OK 14:04:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:25 Set A/D data flow result=40 14:04:25 Set A/D channel type result=40 14:04:25 Set A/D encoding result=40 14:04:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:25 Set channel filter=0.000000e+000 result=40 14:04:25 Config A/D Result=40 14:04:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:25 Get A/D filter: -9.255963e+061 result=40 14:04:25 Get A/D value=-858993460 result=40 14:04:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:25 Parameters OK 14:04:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:25 Set A/D data flow result=40 14:04:25 Set A/D channel type result=40 14:04:25 Set A/D encoding result=40 14:04:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:25 Set channel filter=0.000000e+000 result=40 14:04:25 Config A/D Result=40 14:04:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:25 Get A/D filter: -9.255963e+061 result=40 14:04:25 Get A/D value=-858993460 result=40 14:04:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:25 Aux= 14:04:25 Message to Camera, serial 90260 queued 14:04:32 Received message from Master: op=Shutter serial=90269 14:04:32 Shutter LASER close 14:04:33 Received message from Master: op=PointingHead serial=90273 14:04:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:04:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:04:33 Point started: ret=0 14:04:33 point_skyscan result=0 14:04:34 Check angles 14:04:34 SkyScan query 14:04:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 14:04:34 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 14:04:35 Check angles 14:04:35 SkyScan query 14:04:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 14:04:35 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 14:04:35 Check angles 14:04:35 SkyScan query 14:04:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.31<-18754 Statuses=0008 0009 14:04:36 Msec=1500 True Az=112.995 Ze=-101.31 Az status=0008 Ze status=0009 14:04:36 Check angles 14:04:36 SkyScan query 14:04:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.34<-17356 Statuses=0008 0009 14:04:37 Msec=2250 True Az=112.995 Ze=-80.34 Az status=0008 Ze status=0009 14:04:37 Check angles 14:04:37 SkyScan query 14:04:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.4<-15960 Statuses=0008 0009 14:04:37 Msec=3000 True Az=112.995 Ze=-59.4 Az status=0008 Ze status=0009 14:04:38 Check angles 14:04:38 SkyScan query 14:04:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.995<-14533 Statuses=0008 0009 14:04:38 Msec=3750 True Az=112.995 Ze=-37.995 Az status=0008 Ze status=0009 14:04:38 Check angles 14:04:38 SkyScan query 14:04:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.04<-13136 Statuses=0008 0009 14:04:39 Msec=4500 True Az=112.995 Ze=-17.04 Az status=0008 Ze status=0009 14:04:39 Check angles 14:04:39 SkyScan query 14:04:40 SkyScan query done: ret=0 az=112.995<-7533 ze=3.915<-11739 Statuses=0008 0009 14:04:40 Msec=5250 True Az=112.995 Ze=3.915 Az status=0008 Ze status=0009 14:04:40 Check angles 14:04:40 SkyScan query 14:04:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:04:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:04:40 Message to Master queued w/err=0: serial=90273 error=0 14:04:45 Received message from Master: op=Filter serial=90274 14:04:45 Color wheel filter change from 0 to 0 14:04:45 FLIGetFilterPos err=0 currentPosition=0 14:04:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:45 Filter is already there-color wheel unchanged 14:04:46 Received message from Master: op=Shutter serial=90275 14:04:46 Shutter LASER close 14:04:46 Received message from Camera: op=State serial=90277 14:04:46 GetSingleValue result=40 Value=cccccccc 14:04:46 SkyScan query 14:04:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:04:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:46 Parameters OK 14:04:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:46 Set A/D data flow result=40 14:04:46 Set A/D channel type result=40 14:04:46 Set A/D encoding result=40 14:04:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:46 Set channel filter=0.000000e+000 result=40 14:04:46 Config A/D Result=40 14:04:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:46 Get A/D filter: -9.255963e+061 result=40 14:04:46 Get A/D value=-858993460 result=40 14:04:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:46 Parameters OK 14:04:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:46 Set A/D data flow result=40 14:04:46 Set A/D channel type result=40 14:04:46 Set A/D encoding result=40 14:04:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:46 Set channel filter=0.000000e+000 result=40 14:04:46 Config A/D Result=40 14:04:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:46 Get A/D filter: -9.255963e+061 result=40 14:04:46 Get A/D value=-858993460 result=40 14:04:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:46 Aux= 14:04:46 Message to Camera, serial 90277 queued 14:05:23 Received message from Master: op=PointingHead serial=90290 14:05:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:05:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:05:24 Point started: ret=0 14:05:24 point_skyscan result=0 14:05:24 Check angles 14:05:24 SkyScan query 14:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:05:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:05:25 Message to Master queued w/err=0: serial=90290 error=0 14:05:30 Received message from Master: op=Filter serial=90291 14:05:30 Color wheel filter change from 0 to 0 14:05:30 FLIGetFilterPos err=0 currentPosition=0 14:05:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:30 Filter is already there-color wheel unchanged 14:05:30 Received message from Master: op=Shutter serial=90292 14:05:30 Shutter LASER close 14:05:30 Received message from Camera: op=State serial=90294 14:05:30 GetSingleValue result=40 Value=cccccccc 14:05:30 SkyScan query 14:05:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:05:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:31 Parameters OK 14:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:31 Set A/D data flow result=40 14:05:31 Set A/D channel type result=40 14:05:31 Set A/D encoding result=40 14:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:31 Set channel filter=0.000000e+000 result=40 14:05:31 Config A/D Result=40 14:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:31 Get A/D filter: -9.255963e+061 result=40 14:05:31 Get A/D value=-858993460 result=40 14:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:31 Parameters OK 14:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:31 Set A/D data flow result=40 14:05:31 Set A/D channel type result=40 14:05:31 Set A/D encoding result=40 14:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:31 Set channel filter=0.000000e+000 result=40 14:05:31 Config A/D Result=40 14:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:31 Get A/D filter: -9.255963e+061 result=40 14:05:31 Get A/D value=-858993460 result=40 14:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:31 Aux= 14:05:31 Message to Camera, serial 90294 queued 14:06:08 Received message from Master: op=PointingHead serial=90307 14:06:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:06:08 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:06:08 Point started: ret=0 14:06:08 point_skyscan result=0 14:06:09 Check angles 14:06:09 SkyScan query 14:06:09 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 14:06:09 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 14:06:10 Check angles 14:06:10 SkyScan query 14:06:10 SkyScan query done: ret=0 az=154.26<-10284 ze=-6.495<-12433 Statuses=0009 0008 14:06:10 Msec=750 True Az=154.26 Ze=-6.495 Az status=0009 Ze status=0008 14:06:10 Check angles 14:06:10 SkyScan query 14:06:11 SkyScan query done: ret=0 az=171.675<-11445 ze=-6.495<-12433 Statuses=0009 0008 14:06:11 Msec=1500 True Az=171.675 Ze=-6.495 Az status=0009 Ze status=0008 14:06:11 Check angles 14:06:11 SkyScan query 14:06:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:06:12 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:06:12 Message to Master queued w/err=0: serial=90307 error=0 14:06:17 Received message from Master: op=Filter serial=90308 14:06:17 Color wheel filter change from 0 to 0 14:06:17 FLIGetFilterPos err=0 currentPosition=0 14:06:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:17 Filter is already there-color wheel unchanged 14:06:17 Received message from Master: op=Shutter serial=90309 14:06:17 Shutter LASER close 14:06:17 Received message from Camera: op=State serial=90311 14:06:17 GetSingleValue result=40 Value=cccccccc 14:06:17 SkyScan query 14:06:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:06:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:17 Parameters OK 14:06:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:17 Set A/D data flow result=40 14:06:17 Set A/D channel type result=40 14:06:17 Set A/D encoding result=40 14:06:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:17 Set channel filter=0.000000e+000 result=40 14:06:17 Config A/D Result=40 14:06:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:17 Get A/D filter: -9.255963e+061 result=40 14:06:17 Get A/D value=-858993460 result=40 14:06:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:17 Parameters OK 14:06:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:17 Set A/D data flow result=40 14:06:17 Set A/D channel type result=40 14:06:17 Set A/D encoding result=40 14:06:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:17 Set channel filter=0.000000e+000 result=40 14:06:17 Config A/D Result=40 14:06:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:17 Get A/D filter: -9.255963e+061 result=40 14:06:17 Get A/D value=-858993460 result=40 14:06:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:17 Aux= 14:06:17 Message to Camera, serial 90311 queued 14:06:54 Received message from Master: op=PointingHead serial=90324 14:06:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:06:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:06:55 Point started: ret=0 14:06:55 point_skyscan result=0 14:06:55 Check angles 14:06:55 SkyScan query 14:06:56 SkyScan query done: ret=0 az=152.64<-10176 ze=6.51<-11566 Statuses=0009 0008 14:06:56 Msec=0 True Az=152.64 Ze=6.51 Az status=0009 Ze status=0008 14:06:56 Check angles 14:06:56 SkyScan query 14:06:57 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 14:06:57 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 14:06:57 Check angles 14:06:57 SkyScan query 14:06:57 SkyScan query done: ret=0 az=117.69<-7846 ze=6.495<-11567 Statuses=0009 0008 14:06:57 Msec=1500 True Az=117.69 Ze=6.495 Az status=0009 Ze status=0008 14:06:58 Check angles 14:06:58 SkyScan query 14:06:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:06:58 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:06:58 Message to Master queued w/err=0: serial=90324 error=0 14:07:03 Received message from Master: op=Filter serial=90325 14:07:03 Color wheel filter change from 0 to 0 14:07:03 FLIGetFilterPos err=0 currentPosition=0 14:07:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:03 Filter is already there-color wheel unchanged 14:07:03 Received message from Master: op=Shutter serial=90326 14:07:03 Shutter LASER close 14:07:03 Received message from Camera: op=State serial=90328 14:07:03 GetSingleValue result=40 Value=cccccccc 14:07:03 SkyScan query 14:07:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:07:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:04 Parameters OK 14:07:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:04 Set A/D data flow result=40 14:07:04 Set A/D channel type result=40 14:07:04 Set A/D encoding result=40 14:07:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:04 Set channel filter=0.000000e+000 result=40 14:07:04 Config A/D Result=40 14:07:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:04 Get A/D filter: -9.255963e+061 result=40 14:07:04 Get A/D value=-858993460 result=40 14:07:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:04 Parameters OK 14:07:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:04 Set A/D data flow result=40 14:07:04 Set A/D channel type result=40 14:07:04 Set A/D encoding result=40 14:07:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:04 Set channel filter=0.000000e+000 result=40 14:07:04 Config A/D Result=40 14:07:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:04 Get A/D filter: -9.255963e+061 result=40 14:07:04 Get A/D value=-858993460 result=40 14:07:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:04 Aux= 14:07:04 Message to Camera, serial 90328 queued 14:07:41 Received message from Master: op=PointingHead serial=90341 14:07:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:07:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:07:41 Point started: ret=0 14:07:41 point_skyscan result=0 14:07:42 Check angles 14:07:42 SkyScan query 14:07:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 14:07:42 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 14:07:43 Check angles 14:07:43 SkyScan query 14:07:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 14:07:43 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 14:07:43 Check angles 14:07:43 SkyScan query 14:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.16<-16344 Statuses=0008 0009 14:07:44 Msec=1500 True Az=112.995 Ze=-65.16 Az status=0008 Ze status=0009 14:07:44 Check angles 14:07:44 SkyScan query 14:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.145<-17743 Statuses=0008 0009 14:07:45 Msec=2250 True Az=112.995 Ze=-86.145 Az status=0008 Ze status=0009 14:07:45 Check angles 14:07:45 SkyScan query 14:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.07<-19138 Statuses=0008 0009 14:07:45 Msec=3000 True Az=112.995 Ze=-107.07 Az status=0008 Ze status=0009 14:07:46 Check angles 14:07:46 SkyScan query 14:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.04<-20536 Statuses=0008 0009 14:07:46 Msec=3750 True Az=112.995 Ze=-128.04 Az status=0008 Ze status=0009 14:07:46 Check angles 14:07:46 SkyScan query 14:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.98<-21932 Statuses=0008 0009 14:07:47 Msec=4500 True Az=112.995 Ze=-148.98 Az status=0008 Ze status=0009 14:07:47 Check angles 14:07:47 SkyScan query 14:07:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.92<-23328 Statuses=0008 0009 14:07:48 Msec=5250 True Az=112.995 Ze=-169.92 Az status=0008 Ze status=0009 14:07:48 Check angles 14:07:48 SkyScan query 14:07:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:07:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:07:48 Message to Master queued w/err=0: serial=90341 error=0 14:07:53 Received message from Master: op=Filter serial=90342 14:07:53 Color wheel filter change from 0 to 0 14:07:53 FLIGetFilterPos err=0 currentPosition=0 14:07:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:53 Filter is already there-color wheel unchanged 14:07:54 Received message from Master: op=Shutter serial=90343 14:07:54 Shutter LASER open 14:07:54 Received message from Camera: op=State serial=90345 14:07:54 GetSingleValue result=40 Value=cccccccc 14:07:54 SkyScan query 14:07:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:07:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:54 Parameters OK 14:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:54 Set A/D data flow result=40 14:07:54 Set A/D channel type result=40 14:07:54 Set A/D encoding result=40 14:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:54 Set channel filter=0.000000e+000 result=40 14:07:54 Config A/D Result=40 14:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:54 Get A/D filter: -9.255963e+061 result=40 14:07:54 Get A/D value=-858993460 result=40 14:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:54 Parameters OK 14:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:54 Set A/D data flow result=40 14:07:54 Set A/D channel type result=40 14:07:54 Set A/D encoding result=40 14:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:54 Set channel filter=0.000000e+000 result=40 14:07:54 Config A/D Result=40 14:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:54 Get A/D filter: -9.255963e+061 result=40 14:07:54 Get A/D value=-858993460 result=40 14:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:54 Aux= 14:07:54 Message to Camera, serial 90345 queued 14:08:03 Received message from Master: op=Shutter serial=90355 14:08:03 Shutter LASER close 14:08:03 Received message from Master: op=PointingHead serial=90359 14:08:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:08:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:08:04 Point started: ret=0 14:08:04 point_skyscan result=0 14:08:04 Check angles 14:08:04 SkyScan query 14:08:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 14:08:05 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 14:08:05 Check angles 14:08:05 SkyScan query 14:08:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.38<-20092 Statuses=0008 0009 14:08:06 Msec=750 True Az=112.995 Ze=-121.38 Az status=0008 Ze status=0009 14:08:06 Check angles 14:08:06 SkyScan query 14:08:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.425<-18695 Statuses=0008 0009 14:08:06 Msec=1500 True Az=112.995 Ze=-100.425 Az status=0008 Ze status=0009 14:08:07 Check angles 14:08:07 SkyScan query 14:08:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.455<-17297 Statuses=0008 0009 14:08:07 Msec=2250 True Az=112.995 Ze=-79.455 Az status=0008 Ze status=0009 14:08:07 Check angles 14:08:07 SkyScan query 14:08:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.05<-15870 Statuses=0008 0009 14:08:08 Msec=3000 True Az=112.995 Ze=-58.05 Az status=0008 Ze status=0009 14:08:08 Check angles 14:08:08 SkyScan query 14:08:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.66<-14444 Statuses=0008 0009 14:08:09 Msec=3750 True Az=112.995 Ze=-36.66 Az status=0008 Ze status=0009 14:08:09 Check angles 14:08:09 SkyScan query 14:08:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.705<-13047 Statuses=0008 0009 14:08:10 Msec=4500 True Az=112.995 Ze=-15.705 Az status=0008 Ze status=0009 14:08:10 Check angles 14:08:10 SkyScan query 14:08:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.965<-11669 Statuses=0008 0009 14:08:10 Msec=5250 True Az=112.995 Ze=4.965 Az status=0008 Ze status=0009 14:08:10 Check angles 14:08:10 SkyScan query 14:08:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:08:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:08:11 Message to Master queued w/err=0: serial=90359 error=0 14:08:16 Received message from Master: op=Filter serial=90360 14:08:16 Color wheel filter change from 0 to 0 14:08:16 FLIGetFilterPos err=0 currentPosition=0 14:08:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:16 Filter is already there-color wheel unchanged 14:08:16 Received message from Master: op=Shutter serial=90361 14:08:16 Shutter LASER close 14:08:16 Received message from Camera: op=State serial=90363 14:08:16 GetSingleValue result=40 Value=cccccccc 14:08:16 SkyScan query 14:08:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:17 Parameters OK 14:08:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:17 Set A/D data flow result=40 14:08:17 Set A/D channel type result=40 14:08:17 Set A/D encoding result=40 14:08:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:17 Set channel filter=0.000000e+000 result=40 14:08:17 Config A/D Result=40 14:08:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:17 Get A/D filter: -9.255963e+061 result=40 14:08:17 Get A/D value=-858993460 result=40 14:08:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:17 Parameters OK 14:08:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:17 Set A/D data flow result=40 14:08:17 Set A/D channel type result=40 14:08:17 Set A/D encoding result=40 14:08:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:17 Set channel filter=0.000000e+000 result=40 14:08:17 Config A/D Result=40 14:08:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:17 Get A/D filter: -9.255963e+061 result=40 14:08:17 Get A/D value=-858993460 result=40 14:08:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:17 Aux= 14:08:17 Message to Camera, serial 90363 queued 14:08:54 Received message from Master: op=PointingHead serial=90376 14:08:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:08:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:08:54 Point started: ret=0 14:08:54 point_skyscan result=0 14:08:55 Check angles 14:08:55 SkyScan query 14:08:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:08:55 Message to Master queued w/err=0: serial=90376 error=0 14:09:00 Received message from Master: op=Filter serial=90377 14:09:00 Color wheel filter change from 0 to 0 14:09:00 FLIGetFilterPos err=0 currentPosition=0 14:09:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:00 Filter is already there-color wheel unchanged 14:09:01 Received message from Master: op=Shutter serial=90378 14:09:01 Shutter LASER close 14:09:01 Received message from Camera: op=State serial=90380 14:09:01 GetSingleValue result=40 Value=cccccccc 14:09:01 SkyScan query 14:09:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:09:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:01 Parameters OK 14:09:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:01 Set A/D data flow result=40 14:09:01 Set A/D channel type result=40 14:09:01 Set A/D encoding result=40 14:09:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:01 Set channel filter=0.000000e+000 result=40 14:09:01 Config A/D Result=40 14:09:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:01 Get A/D filter: -9.255963e+061 result=40 14:09:01 Get A/D value=-858993460 result=40 14:09:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:01 Parameters OK 14:09:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:01 Set A/D data flow result=40 14:09:01 Set A/D channel type result=40 14:09:01 Set A/D encoding result=40 14:09:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:01 Set channel filter=0.000000e+000 result=40 14:09:01 Config A/D Result=40 14:09:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:01 Get A/D filter: -9.255963e+061 result=40 14:09:01 Get A/D value=-858993460 result=40 14:09:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:01 Aux= 14:09:01 Message to Camera, serial 90380 queued 14:09:38 Received message from Master: op=PointingHead serial=90393 14:09:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:09:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:09:38 Point started: ret=0 14:09:38 point_skyscan result=0 14:09:39 Check angles 14:09:39 SkyScan query 14:09:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:09:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:09:40 Message to Master queued w/err=0: serial=90393 error=0 14:09:45 Received message from Master: op=Filter serial=90394 14:09:45 Color wheel filter change from 0 to 0 14:09:45 FLIGetFilterPos err=0 currentPosition=0 14:09:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:45 Filter is already there-color wheel unchanged 14:09:45 Received message from Master: op=Shutter serial=90395 14:09:45 Shutter LASER close 14:09:45 Received message from Camera: op=State serial=90397 14:09:45 GetSingleValue result=40 Value=cccccccc 14:09:45 SkyScan query 14:09:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:09:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:46 Parameters OK 14:09:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:46 Set A/D data flow result=40 14:09:46 Set A/D channel type result=40 14:09:46 Set A/D encoding result=40 14:09:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:46 Set channel filter=0.000000e+000 result=40 14:09:46 Config A/D Result=40 14:09:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:46 Get A/D filter: -9.255963e+061 result=40 14:09:46 Get A/D value=-858993460 result=40 14:09:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:46 Parameters OK 14:09:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:46 Set A/D data flow result=40 14:09:46 Set A/D channel type result=40 14:09:46 Set A/D encoding result=40 14:09:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:46 Set channel filter=0.000000e+000 result=40 14:09:46 Config A/D Result=40 14:09:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:46 Get A/D filter: -9.255963e+061 result=40 14:09:46 Get A/D value=-858993460 result=40 14:09:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:46 Aux= 14:09:46 Message to Camera, serial 90397 queued 14:10:22 Received message from Master: op=PointingHead serial=90410 14:10:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:10:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:10:23 Point started: ret=0 14:10:23 point_skyscan result=0 14:10:23 Check angles 14:10:23 SkyScan query 14:10:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:10:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:10:24 Message to Master queued w/err=0: serial=90410 error=0 14:10:29 Received message from Master: op=Filter serial=90411 14:10:29 Color wheel filter change from 0 to 0 14:10:29 FLIGetFilterPos err=0 currentPosition=0 14:10:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:10:29 Filter is already there-color wheel unchanged 14:10:29 Received message from Master: op=Shutter serial=90412 14:10:29 Shutter LASER close 14:10:29 Received message from Camera: op=State serial=90414 14:10:29 GetSingleValue result=40 Value=cccccccc 14:10:29 SkyScan query 14:10:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:10:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:30 Parameters OK 14:10:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:30 Set A/D data flow result=40 14:10:30 Set A/D channel type result=40 14:10:30 Set A/D encoding result=40 14:10:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:30 Set channel filter=0.000000e+000 result=40 14:10:30 Config A/D Result=40 14:10:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:30 Get A/D filter: -9.255963e+061 result=40 14:10:30 Get A/D value=-858993460 result=40 14:10:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:30 Parameters OK 14:10:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:30 Set A/D data flow result=40 14:10:30 Set A/D channel type result=40 14:10:30 Set A/D encoding result=40 14:10:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:30 Set channel filter=0.000000e+000 result=40 14:10:30 Config A/D Result=40 14:10:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:30 Get A/D filter: -9.255963e+061 result=40 14:10:30 Get A/D value=-858993460 result=40 14:10:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:10:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:10:30 Aux= 14:10:30 Message to Camera, serial 90414 queued 14:11:07 Received message from Master: op=PointingHead serial=90427 14:11:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:11:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:11:07 Point started: ret=0 14:11:07 point_skyscan result=0 14:11:08 Check angles 14:11:08 SkyScan query 14:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 14:11:08 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 14:11:09 Check angles 14:11:09 SkyScan query 14:11:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 14:11:09 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 14:11:09 Check angles 14:11:09 SkyScan query 14:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.43<-16362 Statuses=0008 0009 14:11:10 Msec=1500 True Az=112.995 Ze=-65.43 Az status=0008 Ze status=0009 14:11:10 Check angles 14:11:10 SkyScan query 14:11:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.79<-17786 Statuses=0008 0009 14:11:11 Msec=2250 True Az=112.995 Ze=-86.79 Az status=0008 Ze status=0009 14:11:11 Check angles 14:11:11 SkyScan query 14:11:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.76<-19184 Statuses=0008 0009 14:11:11 Msec=3000 True Az=112.995 Ze=-107.76 Az status=0008 Ze status=0009 14:11:12 Check angles 14:11:12 SkyScan query 14:11:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.685<-20579 Statuses=0008 0009 14:11:12 Msec=3750 True Az=112.995 Ze=-128.685 Az status=0008 Ze status=0009 14:11:12 Check angles 14:11:12 SkyScan query 14:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.09<-22006 Statuses=0008 0009 14:11:13 Msec=4500 True Az=112.995 Ze=-150.09 Az status=0008 Ze status=0009 14:11:13 Check angles 14:11:13 SkyScan query 14:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.94<-23396 Statuses=0008 0009 14:11:14 Msec=5250 True Az=112.995 Ze=-170.94 Az status=0008 Ze status=0009 14:11:14 Check angles 14:11:14 SkyScan query 14:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:11:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:11:14 Message to Master queued w/err=0: serial=90427 error=0 14:11:19 Received message from Master: op=Filter serial=90428 14:11:19 Color wheel filter change from 0 to 0 14:11:19 FLIGetFilterPos err=0 currentPosition=0 14:11:19 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:19 Filter is already there-color wheel unchanged 14:11:20 Received message from Master: op=Shutter serial=90429 14:11:20 Shutter LASER open 14:11:20 Received message from Camera: op=State serial=90431 14:11:20 GetSingleValue result=40 Value=cccccccc 14:11:20 SkyScan query 14:11:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:11:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:20 Parameters OK 14:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:20 Set A/D data flow result=40 14:11:20 Set A/D channel type result=40 14:11:20 Set A/D encoding result=40 14:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:20 Set channel filter=0.000000e+000 result=40 14:11:20 Config A/D Result=40 14:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:20 Get A/D filter: -9.255963e+061 result=40 14:11:20 Get A/D value=-858993460 result=40 14:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:20 Parameters OK 14:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:20 Set A/D data flow result=40 14:11:20 Set A/D channel type result=40 14:11:20 Set A/D encoding result=40 14:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:20 Set channel filter=0.000000e+000 result=40 14:11:20 Config A/D Result=40 14:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:20 Get A/D filter: -9.255963e+061 result=40 14:11:20 Get A/D value=-858993460 result=40 14:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:20 Aux= 14:11:20 Message to Camera, serial 90431 queued 14:11:29 Received message from Master: op=Shutter serial=90441 14:11:29 Shutter LASER close 14:11:29 Received message from Master: op=PointingHead serial=90445 14:11:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:11:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:11:30 Point started: ret=0 14:11:30 point_skyscan result=0 14:11:30 Check angles 14:11:30 SkyScan query 14:11:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 14:11:31 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 14:11:31 Check angles 14:11:31 SkyScan query 14:11:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 14:11:32 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 14:11:32 Check angles 14:11:32 SkyScan query 14:11:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 14:11:33 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 14:11:33 Check angles 14:11:33 SkyScan query 14:11:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 14:11:33 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 14:11:33 Check angles 14:11:33 SkyScan query 14:11:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.545<-15903 Statuses=0008 0009 14:11:34 Msec=3000 True Az=112.995 Ze=-58.545 Az status=0008 Ze status=0009 14:11:34 Check angles 14:11:34 SkyScan query 14:11:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.17<-14478 Statuses=0008 0009 14:11:35 Msec=3750 True Az=112.995 Ze=-37.17 Az status=0008 Ze status=0009 14:11:35 Check angles 14:11:35 SkyScan query 14:11:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.2<-13080 Statuses=0008 0009 14:11:36 Msec=4500 True Az=112.995 Ze=-16.2 Az status=0008 Ze status=0009 14:11:36 Check angles 14:11:36 SkyScan query 14:11:36 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 14:11:36 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 14:11:36 Check angles 14:11:36 SkyScan query 14:11:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:11:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:11:37 Message to Master queued w/err=0: serial=90445 error=0 14:11:42 Received message from Master: op=Filter serial=90446 14:11:42 Color wheel filter change from 0 to 0 14:11:42 FLIGetFilterPos err=0 currentPosition=0 14:11:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:42 Filter is already there-color wheel unchanged 14:11:42 Received message from Master: op=Shutter serial=90447 14:11:42 Shutter LASER close 14:11:42 Received message from Camera: op=State serial=90449 14:11:42 GetSingleValue result=40 Value=cccccccc 14:11:42 SkyScan query 14:11:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:11:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:43 Parameters OK 14:11:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:43 Set A/D data flow result=40 14:11:43 Set A/D channel type result=40 14:11:43 Set A/D encoding result=40 14:11:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:43 Set channel filter=0.000000e+000 result=40 14:11:43 Config A/D Result=40 14:11:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:43 Get A/D filter: -9.255963e+061 result=40 14:11:43 Get A/D value=-858993460 result=40 14:11:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:43 Parameters OK 14:11:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:43 Set A/D data flow result=40 14:11:43 Set A/D channel type result=40 14:11:43 Set A/D encoding result=40 14:11:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:43 Set channel filter=0.000000e+000 result=40 14:11:43 Config A/D Result=40 14:11:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:43 Get A/D filter: -9.255963e+061 result=40 14:11:43 Get A/D value=-858993460 result=40 14:11:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:43 Aux= 14:11:43 Message to Camera, serial 90449 queued 14:12:20 Received message from Master: op=PointingHead serial=90462 14:12:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:12:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:12:20 Point started: ret=0 14:12:20 point_skyscan result=0 14:12:21 Check angles 14:12:21 SkyScan query 14:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:12:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:12:21 Message to Master queued w/err=0: serial=90462 error=0 14:12:26 Received message from Master: op=Filter serial=90463 14:12:26 Color wheel filter change from 0 to 0 14:12:26 FLIGetFilterPos err=0 currentPosition=0 14:12:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:26 Filter is already there-color wheel unchanged 14:12:27 Received message from Master: op=Shutter serial=90464 14:12:27 Shutter LASER close 14:12:27 Received message from Camera: op=State serial=90466 14:12:27 GetSingleValue result=40 Value=cccccccc 14:12:27 SkyScan query 14:12:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:12:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:27 Parameters OK 14:12:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:27 Set A/D data flow result=40 14:12:27 Set A/D channel type result=40 14:12:27 Set A/D encoding result=40 14:12:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:27 Set channel filter=0.000000e+000 result=40 14:12:27 Config A/D Result=40 14:12:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:27 Get A/D filter: -9.255963e+061 result=40 14:12:27 Get A/D value=-858993460 result=40 14:12:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:27 Parameters OK 14:12:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:27 Set A/D data flow result=40 14:12:27 Set A/D channel type result=40 14:12:27 Set A/D encoding result=40 14:12:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:27 Set channel filter=0.000000e+000 result=40 14:12:27 Config A/D Result=40 14:12:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:27 Get A/D filter: -9.255963e+061 result=40 14:12:27 Get A/D value=-858993460 result=40 14:12:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:27 Aux= 14:12:27 Message to Camera, serial 90466 queued 14:13:04 Received message from Master: op=PointingHead serial=90479 14:13:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:13:04 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:13:04 Point started: ret=0 14:13:04 point_skyscan result=0 14:13:05 Check angles 14:13:05 SkyScan query 14:13:06 SkyScan query done: ret=0 az=136.35<-9090 ze=-6.51<-12434 Statuses=0009 0008 14:13:06 Msec=0 True Az=136.35 Ze=-6.51 Az status=0009 Ze status=0008 14:13:06 Check angles 14:13:06 SkyScan query 14:13:07 SkyScan query done: ret=0 az=154.185<-10279 ze=-6.495<-12433 Statuses=0009 0008 14:13:07 Msec=750 True Az=154.185 Ze=-6.495 Az status=0009 Ze status=0008 14:13:07 Check angles 14:13:07 SkyScan query 14:13:07 SkyScan query done: ret=0 az=171.66<-11444 ze=-6.495<-12433 Statuses=0009 0008 14:13:07 Msec=1500 True Az=171.66 Ze=-6.495 Az status=0009 Ze status=0008 14:13:07 Check angles 14:13:07 SkyScan query 14:13:08 SkyScan query done: ret=0 az=175.98<-11732 ze=-6.495<-12433 Statuses=0008 0008 14:13:08 Msec=2250 True Az=175.98 Ze=-6.495 Az status=0008 Ze status=0008 14:13:08 Message to Master queued w/err=0: serial=90479 error=0 14:13:13 Received message from Master: op=Filter serial=90480 14:13:13 Color wheel filter change from 0 to 0 14:13:13 FLIGetFilterPos err=0 currentPosition=0 14:13:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:13 Filter is already there-color wheel unchanged 14:13:13 Received message from Master: op=Shutter serial=90481 14:13:13 Shutter LASER close 14:13:13 Received message from Camera: op=State serial=90483 14:13:13 GetSingleValue result=40 Value=cccccccc 14:13:13 SkyScan query 14:13:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:13:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:14 Parameters OK 14:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:14 Set A/D data flow result=40 14:13:14 Set A/D channel type result=40 14:13:14 Set A/D encoding result=40 14:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:14 Set channel filter=0.000000e+000 result=40 14:13:14 Config A/D Result=40 14:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:14 Get A/D filter: -9.255963e+061 result=40 14:13:14 Get A/D value=-858993460 result=40 14:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:14 Parameters OK 14:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:14 Set A/D data flow result=40 14:13:14 Set A/D channel type result=40 14:13:14 Set A/D encoding result=40 14:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:14 Set channel filter=0.000000e+000 result=40 14:13:14 Config A/D Result=40 14:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:14 Get A/D filter: -9.255963e+061 result=40 14:13:14 Get A/D value=-858993460 result=40 14:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:14 Aux= 14:13:14 Message to Camera, serial 90483 queued 14:13:51 Received message from Master: op=PointingHead serial=90496 14:13:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:13:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:13:51 Point started: ret=0 14:13:51 point_skyscan result=0 14:13:52 Check angles 14:13:52 SkyScan query 14:13:52 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 14:13:52 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 14:13:53 Check angles 14:13:53 SkyScan query 14:13:53 SkyScan query done: ret=0 az=135.06<-9004 ze=6.495<-11567 Statuses=0009 0008 14:13:53 Msec=750 True Az=135.06 Ze=6.495 Az status=0009 Ze status=0008 14:13:53 Check angles 14:13:53 SkyScan query 14:13:54 SkyScan query done: ret=0 az=117.36<-7824 ze=6.495<-11567 Statuses=0009 0008 14:13:54 Msec=1500 True Az=117.36 Ze=6.495 Az status=0009 Ze status=0008 14:13:54 Check angles 14:13:54 SkyScan query 14:13:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:13:55 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:13:55 Message to Master queued w/err=0: serial=90496 error=0 14:14:00 Received message from Master: op=Filter serial=90497 14:14:00 Color wheel filter change from 0 to 0 14:14:00 FLIGetFilterPos err=0 currentPosition=0 14:14:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:00 Filter is already there-color wheel unchanged 14:14:00 Received message from Master: op=Shutter serial=90498 14:14:00 Shutter LASER close 14:14:00 Received message from Camera: op=State serial=90500 14:14:00 GetSingleValue result=40 Value=cccccccc 14:14:00 SkyScan query 14:14:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:14:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:00 Parameters OK 14:14:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:00 Set A/D data flow result=40 14:14:00 Set A/D channel type result=40 14:14:00 Set A/D encoding result=40 14:14:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:00 Set channel filter=0.000000e+000 result=40 14:14:00 Config A/D Result=40 14:14:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:00 Get A/D filter: -9.255963e+061 result=40 14:14:00 Get A/D value=-858993460 result=40 14:14:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:00 Parameters OK 14:14:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:00 Set A/D data flow result=40 14:14:00 Set A/D channel type result=40 [UTC 2019-3-3 14:14:00] 14:14:00 Set A/D encoding result=40 14:14:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:00 Set channel filter=0.000000e+000 result=40 14:14:00 Config A/D Result=40 14:14:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:00 Get A/D filter: -9.255963e+061 result=40 14:14:00 Get A/D value=-858993460 result=40 14:14:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:00 Aux= 14:14:00 Message to Camera, serial 90500 queued 14:14:37 Received message from Master: op=PointingHead serial=90513 14:14:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:14:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:14:38 Point started: ret=0 14:14:38 point_skyscan result=0 14:14:38 Check angles 14:14:38 SkyScan query 14:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 14:14:39 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 14:14:39 Check angles 14:14:39 SkyScan query 14:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.325<-14955 Statuses=0008 0009 14:14:40 Msec=750 True Az=112.995 Ze=-44.325 Az status=0008 Ze status=0009 14:14:40 Check angles 14:14:40 SkyScan query 14:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.28<-16352 Statuses=0008 0009 14:14:40 Msec=1500 True Az=112.995 Ze=-65.28 Az status=0008 Ze status=0009 14:14:41 Check angles 14:14:41 SkyScan query 14:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 14:14:41 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 14:14:41 Check angles 14:14:41 SkyScan query 14:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.61<-19174 Statuses=0008 0009 14:14:42 Msec=3000 True Az=112.995 Ze=-107.61 Az status=0008 Ze status=0009 14:14:42 Check angles 14:14:42 SkyScan query 14:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.55<-20570 Statuses=0008 0009 14:14:43 Msec=3750 True Az=112.995 Ze=-128.55 Az status=0008 Ze status=0009 14:14:43 Check angles 14:14:43 SkyScan query 14:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.52<-21968 Statuses=0008 0009 14:14:43 Msec=4500 True Az=112.995 Ze=-149.52 Az status=0008 Ze status=0009 14:14:44 Check angles 14:14:44 SkyScan query 14:14:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.46<-23364 Statuses=0008 0009 14:14:44 Msec=5250 True Az=112.995 Ze=-170.46 Az status=0008 Ze status=0009 14:14:44 Check angles 14:14:44 SkyScan query 14:14:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:14:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:14:45 Message to Master queued w/err=0: serial=90513 error=0 14:14:50 Received message from Master: op=Filter serial=90514 14:14:50 Color wheel filter change from 0 to 0 14:14:50 FLIGetFilterPos err=0 currentPosition=0 14:14:50 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:50 Filter is already there-color wheel unchanged 14:14:50 Received message from Master: op=Shutter serial=90515 14:14:50 Shutter LASER open 14:14:50 Received message from Camera: op=State serial=90517 14:14:50 GetSingleValue result=40 Value=cccccccc 14:14:50 SkyScan query 14:14:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:14:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:51 Parameters OK 14:14:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:51 Set A/D data flow result=40 14:14:51 Set A/D channel type result=40 14:14:51 Set A/D encoding result=40 14:14:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:51 Set channel filter=0.000000e+000 result=40 14:14:51 Config A/D Result=40 14:14:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:51 Get A/D filter: -9.255963e+061 result=40 14:14:51 Get A/D value=-858993460 result=40 14:14:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:51 Parameters OK 14:14:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:51 Set A/D data flow result=40 14:14:51 Set A/D channel type result=40 14:14:51 Set A/D encoding result=40 14:14:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:51 Set channel filter=0.000000e+000 result=40 14:14:51 Config A/D Result=40 14:14:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:51 Get A/D filter: -9.255963e+061 result=40 14:14:51 Get A/D value=-858993460 result=40 14:14:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:51 Aux= 14:14:51 Message to Camera, serial 90517 queued 14:14:59 Received message from Master: op=Shutter serial=90527 14:14:59 Shutter LASER close 14:15:00 Received message from Master: op=PointingHead serial=90531 14:15:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:15:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:15:00 Point started: ret=0 14:15:00 point_skyscan result=0 14:15:01 Check angles 14:15:01 SkyScan query 14:15:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 14:15:01 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 14:15:02 Check angles 14:15:02 SkyScan query 14:15:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 14:15:02 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 14:15:02 Check angles 14:15:02 SkyScan query 14:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 14:15:03 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 14:15:03 Check angles 14:15:03 SkyScan query 14:15:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.55<-17370 Statuses=0008 0009 14:15:04 Msec=2250 True Az=112.995 Ze=-80.55 Az status=0008 Ze status=0009 14:15:04 Check angles 14:15:04 SkyScan query 14:15:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 14:15:04 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 14:15:05 Check angles 14:15:05 SkyScan query 14:15:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 14:15:05 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 14:15:05 Check angles 14:15:05 SkyScan query 14:15:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 14:15:06 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 14:15:06 Check angles 14:15:06 SkyScan query 14:15:07 SkyScan query done: ret=0 az=112.995<-7533 ze=3.705<-11753 Statuses=0008 0009 14:15:07 Msec=5250 True Az=112.995 Ze=3.705 Az status=0008 Ze status=0009 14:15:07 Check angles 14:15:07 SkyScan query 14:15:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:15:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:15:07 Message to Master queued w/err=0: serial=90531 error=0 14:15:12 Received message from Master: op=Filter serial=90532 14:15:12 Color wheel filter change from 0 to 0 14:15:12 FLIGetFilterPos err=0 currentPosition=0 14:15:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:12 Filter is already there-color wheel unchanged 14:15:13 Received message from Master: op=Shutter serial=90533 14:15:13 Shutter LASER close 14:15:13 Received message from Camera: op=State serial=90535 14:15:13 GetSingleValue result=40 Value=cccccccc 14:15:13 SkyScan query 14:15:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:15:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:13 Parameters OK 14:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:13 Set A/D data flow result=40 14:15:13 Set A/D channel type result=40 14:15:13 Set A/D encoding result=40 14:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:13 Set channel filter=0.000000e+000 result=40 14:15:13 Config A/D Result=40 14:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:13 Get A/D filter: -9.255963e+061 result=40 14:15:13 Get A/D value=-858993460 result=40 14:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:13 Parameters OK 14:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:13 Set A/D data flow result=40 14:15:13 Set A/D channel type result=40 14:15:13 Set A/D encoding result=40 14:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:13 Set channel filter=0.000000e+000 result=40 14:15:13 Config A/D Result=40 14:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:13 Get A/D filter: -9.255963e+061 result=40 14:15:13 Get A/D value=-858993460 result=40 14:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:13 Aux= 14:15:13 Message to Camera, serial 90535 queued 14:15:49 Received message from Master: op=PointingHead serial=90547 14:15:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:15:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:15:50 Point started: ret=0 14:15:50 point_skyscan result=0 14:15:50 Check angles 14:15:50 SkyScan query 14:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:15:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:15:51 Message to Master queued w/err=0: serial=90547 error=0 14:15:56 Received message from Master: op=Filter serial=90548 14:15:56 Color wheel filter change from 0 to 0 14:15:56 FLIGetFilterPos err=0 currentPosition=0 14:15:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:56 Filter is already there-color wheel unchanged 14:15:56 Received message from Master: op=Shutter serial=90549 14:15:56 Shutter LASER close 14:15:56 Received message from Camera: op=State serial=90551 14:15:56 GetSingleValue result=40 Value=cccccccc 14:15:56 SkyScan query 14:15:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:15:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:57 Parameters OK 14:15:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:57 Set A/D data flow result=40 14:15:57 Set A/D channel type result=40 14:15:57 Set A/D encoding result=40 14:15:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:57 Set channel filter=0.000000e+000 result=40 14:15:57 Config A/D Result=40 14:15:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:57 Get A/D filter: -9.255963e+061 result=40 14:15:57 Get A/D value=-858993460 result=40 14:15:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:57 Parameters OK 14:15:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:57 Set A/D data flow result=40 14:15:57 Set A/D channel type result=40 14:15:57 Set A/D encoding result=40 14:15:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:57 Set channel filter=0.000000e+000 result=40 14:15:57 Config A/D Result=40 14:15:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:57 Get A/D filter: -9.255963e+061 result=40 14:15:57 Get A/D value=-858993460 result=40 14:15:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:57 Aux= 14:15:57 Message to Camera, serial 90551 queued 14:16:34 Received message from Master: op=PointingHead serial=90564 14:16:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:16:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:16:34 Point started: ret=0 14:16:34 point_skyscan result=0 14:16:35 Check angles 14:16:35 SkyScan query 14:16:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:16:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:16:35 Message to Master queued w/err=0: serial=90564 error=0 14:16:40 Received message from Master: op=Filter serial=90565 14:16:40 Color wheel filter change from 0 to 0 14:16:40 FLIGetFilterPos err=0 currentPosition=0 14:16:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:40 Filter is already there-color wheel unchanged 14:16:40 Received message from Master: op=Shutter serial=90566 14:16:40 Shutter LASER close 14:16:40 Received message from Camera: op=State serial=90568 14:16:40 GetSingleValue result=40 Value=cccccccc 14:16:40 SkyScan query 14:16:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:16:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:41 Parameters OK 14:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:41 Set A/D data flow result=40 14:16:41 Set A/D channel type result=40 14:16:41 Set A/D encoding result=40 14:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:41 Set channel filter=0.000000e+000 result=40 14:16:41 Config A/D Result=40 14:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:41 Get A/D filter: -9.255963e+061 result=40 14:16:41 Get A/D value=-858993460 result=40 14:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:41 Parameters OK 14:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:41 Set A/D data flow result=40 14:16:41 Set A/D channel type result=40 14:16:41 Set A/D encoding result=40 14:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:41 Set channel filter=0.000000e+000 result=40 14:16:41 Config A/D Result=40 14:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:41 Get A/D filter: -9.255963e+061 result=40 14:16:41 Get A/D value=-858993460 result=40 14:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:41 Aux= 14:16:41 Message to Camera, serial 90568 queued 14:17:18 Received message from Master: op=PointingHead serial=90581 14:17:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:17:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:17:18 Point started: ret=0 14:17:18 point_skyscan result=0 14:17:19 Check angles 14:17:19 SkyScan query 14:17:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:17:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:17:20 Message to Master queued w/err=0: serial=90581 error=0 14:17:25 Received message from Master: op=Filter serial=90582 14:17:25 Color wheel filter change from 0 to 0 14:17:25 FLIGetFilterPos err=0 currentPosition=0 14:17:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:25 Filter is already there-color wheel unchanged 14:17:25 Received message from Master: op=Shutter serial=90583 14:17:25 Shutter LASER close 14:17:25 Received message from Camera: op=State serial=90585 14:17:25 GetSingleValue result=40 Value=cccccccc 14:17:25 SkyScan query 14:17:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:17:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:25 Parameters OK 14:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:25 Set A/D data flow result=40 14:17:25 Set A/D channel type result=40 14:17:25 Set A/D encoding result=40 14:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:25 Set channel filter=0.000000e+000 result=40 14:17:25 Config A/D Result=40 14:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:25 Get A/D filter: -9.255963e+061 result=40 14:17:25 Get A/D value=-858993460 result=40 14:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:25 Parameters OK 14:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:25 Set A/D data flow result=40 14:17:25 Set A/D channel type result=40 14:17:25 Set A/D encoding result=40 14:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:25 Set channel filter=0.000000e+000 result=40 14:17:25 Config A/D Result=40 14:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:25 Get A/D filter: -9.255963e+061 result=40 14:17:25 Get A/D value=-858993460 result=40 14:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:25 Aux= 14:17:25 Message to Camera, serial 90585 queued 14:18:02 Received message from Master: op=PointingHead serial=90598 14:18:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:18:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:18:02 Point started: ret=0 14:18:02 point_skyscan result=0 14:18:03 Check angles 14:18:03 SkyScan query 14:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 14:18:04 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 14:18:04 Check angles 14:18:04 SkyScan query 14:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 14:18:05 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 14:18:05 Check angles 14:18:05 SkyScan query 14:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 14:18:05 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 14:18:05 Check angles 14:18:05 SkyScan query 14:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.385<-17759 Statuses=0008 0009 14:18:06 Msec=2250 True Az=112.995 Ze=-86.385 Az status=0008 Ze status=0009 14:18:06 Check angles 14:18:06 SkyScan query 14:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.325<-19155 Statuses=0008 0009 14:18:07 Msec=3000 True Az=112.995 Ze=-107.325 Az status=0008 Ze status=0009 14:18:07 Check angles 14:18:07 SkyScan query 14:18:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.265<-20551 Statuses=0008 0009 14:18:08 Msec=3750 True Az=112.995 Ze=-128.265 Az status=0008 Ze status=0009 14:18:08 Check angles 14:18:08 SkyScan query 14:18:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.235<-21949 Statuses=0008 0009 14:18:08 Msec=4500 True Az=112.995 Ze=-149.235 Az status=0008 Ze status=0009 14:18:08 Check angles 14:18:08 SkyScan query 14:18:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.175<-23345 Statuses=0008 0009 14:18:09 Msec=5250 True Az=112.995 Ze=-170.175 Az status=0008 Ze status=0009 14:18:09 Check angles 14:18:09 SkyScan query 14:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:18:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:18:10 Message to Master queued w/err=0: serial=90598 error=0 14:18:15 Received message from Master: op=Filter serial=90599 14:18:15 Color wheel filter change from 0 to 0 14:18:15 FLIGetFilterPos err=0 currentPosition=0 14:18:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:15 Filter is already there-color wheel unchanged 14:18:15 Received message from Master: op=Shutter serial=90600 14:18:15 Shutter LASER open 14:18:15 Received message from Camera: op=State serial=90602 14:18:15 GetSingleValue result=40 Value=cccccccc 14:18:15 SkyScan query 14:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:18:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:16 Parameters OK 14:18:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:16 Set A/D data flow result=40 14:18:16 Set A/D channel type result=40 14:18:16 Set A/D encoding result=40 14:18:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:16 Set channel filter=0.000000e+000 result=40 14:18:16 Config A/D Result=40 14:18:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:16 Get A/D filter: -9.255963e+061 result=40 14:18:16 Get A/D value=-858993460 result=40 14:18:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:16 Parameters OK 14:18:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:16 Set A/D data flow result=40 14:18:16 Set A/D channel type result=40 14:18:16 Set A/D encoding result=40 14:18:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:16 Set channel filter=0.000000e+000 result=40 14:18:16 Config A/D Result=40 14:18:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:16 Get A/D filter: -9.255963e+061 result=40 14:18:16 Get A/D value=-858993460 result=40 14:18:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:16 Aux= 14:18:16 Message to Camera, serial 90602 queued 14:18:24 Received message from Master: op=Shutter serial=90612 14:18:24 Shutter LASER close 14:18:25 Received message from Master: op=PointingHead serial=90616 14:18:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:18:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:18:25 Point started: ret=0 14:18:25 point_skyscan result=0 14:18:26 Check angles 14:18:26 SkyScan query 14:18:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 14:18:26 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 14:18:27 Check angles 14:18:27 SkyScan query 14:18:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 14:18:27 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 14:18:27 Check angles 14:18:27 SkyScan query 14:18:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.235<-18749 Statuses=0008 0009 14:18:28 Msec=1500 True Az=112.995 Ze=-101.235 Az status=0008 Ze status=0009 14:18:28 Check angles 14:18:28 SkyScan query 14:18:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 14:18:29 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 14:18:29 Check angles 14:18:29 SkyScan query 14:18:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.44<-15896 Statuses=0008 0009 14:18:29 Msec=3000 True Az=112.995 Ze=-58.44 Az status=0008 Ze status=0009 14:18:30 Check angles 14:18:30 SkyScan query 14:18:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.5<-14500 Statuses=0008 0009 14:18:30 Msec=3750 True Az=112.995 Ze=-37.5 Az status=0008 Ze status=0009 14:18:30 Check angles 14:18:30 SkyScan query 14:18:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.53<-13102 Statuses=0008 0009 14:18:31 Msec=4500 True Az=112.995 Ze=-16.53 Az status=0008 Ze status=0009 14:18:31 Check angles 14:18:31 SkyScan query 14:18:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.35<-11710 Statuses=0008 0009 14:18:32 Msec=5250 True Az=112.995 Ze=4.35 Az status=0008 Ze status=0009 14:18:32 Check angles 14:18:32 SkyScan query 14:18:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:18:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:18:32 Message to Master queued w/err=0: serial=90616 error=0 14:18:37 Received message from Master: op=Filter serial=90617 14:18:37 Color wheel filter change from 0 to 0 14:18:37 FLIGetFilterPos err=0 currentPosition=0 14:18:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:37 Filter is already there-color wheel unchanged 14:18:38 Received message from Master: op=Shutter serial=90618 14:18:38 Shutter LASER close 14:18:38 Received message from Camera: op=State serial=90620 14:18:38 GetSingleValue result=40 Value=cccccccc 14:18:38 SkyScan query 14:18:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:18:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:38 Parameters OK 14:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:38 Set A/D data flow result=40 14:18:38 Set A/D channel type result=40 14:18:38 Set A/D encoding result=40 14:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:38 Set channel filter=0.000000e+000 result=40 14:18:38 Config A/D Result=40 14:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:38 Get A/D filter: -9.255963e+061 result=40 14:18:38 Get A/D value=-858993460 result=40 14:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:38 Parameters OK 14:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:38 Set A/D data flow result=40 14:18:38 Set A/D channel type result=40 14:18:38 Set A/D encoding result=40 14:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:38 Set channel filter=0.000000e+000 result=40 14:18:38 Config A/D Result=40 14:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:38 Get A/D filter: -9.255963e+061 result=40 14:18:38 Get A/D value=-858993460 result=40 14:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:38 Aux= 14:18:38 Message to Camera, serial 90620 queued 14:19:15 Received message from Master: op=PointingHead serial=90633 14:19:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:19:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:19:16 Point started: ret=0 14:19:16 point_skyscan result=0 14:19:16 Check angles 14:19:16 SkyScan query 14:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:19:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:19:17 Message to Master queued w/err=0: serial=90633 error=0 14:19:22 Received message from Master: op=Filter serial=90634 14:19:22 Color wheel filter change from 0 to 0 14:19:22 FLIGetFilterPos err=0 currentPosition=0 14:19:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:22 Filter is already there-color wheel unchanged 14:19:22 Received message from Master: op=Shutter serial=90635 14:19:22 Shutter LASER close 14:19:22 Received message from Camera: op=State serial=90637 14:19:22 GetSingleValue result=40 Value=cccccccc 14:19:22 SkyScan query 14:19:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:19:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:23 Parameters OK 14:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:23 Set A/D data flow result=40 14:19:23 Set A/D channel type result=40 14:19:23 Set A/D encoding result=40 14:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:23 Set channel filter=0.000000e+000 result=40 14:19:23 Config A/D Result=40 14:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:23 Get A/D filter: -9.255963e+061 result=40 14:19:23 Get A/D value=-858993460 result=40 14:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:23 Parameters OK 14:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:23 Set A/D data flow result=40 14:19:23 Set A/D channel type result=40 14:19:23 Set A/D encoding result=40 14:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:23 Set channel filter=0.000000e+000 result=40 14:19:23 Config A/D Result=40 14:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:23 Get A/D filter: -9.255963e+061 result=40 14:19:23 Get A/D value=-858993460 result=40 14:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:23 Aux= 14:19:23 Message to Camera, serial 90637 queued 14:20:00 Received message from Master: op=PointingHead serial=90650 14:20:00 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:20:00 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:20:00 Point started: ret=0 14:20:00 point_skyscan result=0 14:20:01 Check angles 14:20:01 SkyScan query 14:20:01 SkyScan query done: ret=0 az=135.825<-9055 ze=-6.51<-12434 Statuses=0009 0008 14:20:01 Msec=0 True Az=135.825 Ze=-6.51 Az status=0009 Ze status=0008 14:20:01 Check angles 14:20:01 SkyScan query 14:20:02 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.495<-12433 Statuses=0009 0008 14:20:02 Msec=750 True Az=153.345 Ze=-6.495 Az status=0009 Ze status=0008 14:20:02 Check angles 14:20:02 SkyScan query 14:20:03 SkyScan query done: ret=0 az=170.85<-11390 ze=-6.495<-12433 Statuses=0009 0008 14:20:03 Msec=1500 True Az=170.85 Ze=-6.495 Az status=0009 Ze status=0008 14:20:03 Check angles 14:20:03 SkyScan query 14:20:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:20:03 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:20:03 Message to Master queued w/err=0: serial=90650 error=0 14:20:08 Received message from Master: op=Filter serial=90651 14:20:08 Color wheel filter change from 0 to 0 14:20:08 FLIGetFilterPos err=0 currentPosition=0 14:20:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:08 Filter is already there-color wheel unchanged 14:20:09 Received message from Master: op=Shutter serial=90652 14:20:09 Shutter LASER close 14:20:09 Received message from Camera: op=State serial=90654 14:20:09 GetSingleValue result=40 Value=cccccccc 14:20:09 SkyScan query 14:20:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:20:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:09 Parameters OK 14:20:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:09 Set A/D data flow result=40 14:20:09 Set A/D channel type result=40 14:20:09 Set A/D encoding result=40 14:20:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:09 Set channel filter=0.000000e+000 result=40 14:20:09 Config A/D Result=40 14:20:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:09 Get A/D filter: -9.255963e+061 result=40 14:20:09 Get A/D value=-858993460 result=40 14:20:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:09 Parameters OK 14:20:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:09 Set A/D data flow result=40 14:20:09 Set A/D channel type result=40 14:20:09 Set A/D encoding result=40 14:20:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:09 Set channel filter=0.000000e+000 result=40 14:20:09 Config A/D Result=40 14:20:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:09 Get A/D filter: -9.255963e+061 result=40 14:20:09 Get A/D value=-858993460 result=40 14:20:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:09 Aux= 14:20:09 Message to Camera, serial 90654 queued 14:20:45 Received message from Master: op=PointingHead serial=90666 14:20:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:20:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:20:46 Point started: ret=0 14:20:46 point_skyscan result=0 14:20:46 Check angles 14:20:46 SkyScan query 14:20:47 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 14:20:47 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 14:20:47 Check angles 14:20:47 SkyScan query 14:20:48 SkyScan query done: ret=0 az=135.66<-9044 ze=6.495<-11567 Statuses=0009 0008 14:20:48 Msec=750 True Az=135.66 Ze=6.495 Az status=0009 Ze status=0008 14:20:48 Check angles 14:20:48 SkyScan query 14:20:48 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 14:20:48 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 14:20:49 Check angles 14:20:49 SkyScan query 14:20:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:20:49 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:20:49 Message to Master queued w/err=0: serial=90666 error=0 14:20:54 Received message from Master: op=Filter serial=90667 14:20:54 Color wheel filter change from 0 to 0 14:20:54 FLIGetFilterPos err=0 currentPosition=0 14:20:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:54 Filter is already there-color wheel unchanged 14:20:54 Received message from Master: op=Shutter serial=90668 14:20:54 Shutter LASER close 14:20:54 Received message from Camera: op=State serial=90670 14:20:54 GetSingleValue result=40 Value=cccccccc 14:20:54 SkyScan query 14:20:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:20:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:55 Parameters OK 14:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:55 Set A/D data flow result=40 14:20:55 Set A/D channel type result=40 14:20:55 Set A/D encoding result=40 14:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:55 Set channel filter=0.000000e+000 result=40 14:20:55 Config A/D Result=40 14:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:55 Get A/D filter: -9.255963e+061 result=40 14:20:55 Get A/D value=-858993460 result=40 14:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:55 Parameters OK 14:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:55 Set A/D data flow result=40 14:20:55 Set A/D channel type result=40 14:20:55 Set A/D encoding result=40 14:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:55 Set channel filter=0.000000e+000 result=40 14:20:55 Config A/D Result=40 14:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:55 Get A/D filter: -9.255963e+061 result=40 14:20:55 Get A/D value=-858993460 result=40 14:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:55 Aux= 14:20:55 Message to Camera, serial 90670 queued 14:21:32 Received message from Master: op=PointingHead serial=90683 14:21:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:21:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:21:32 Point started: ret=0 14:21:32 point_skyscan result=0 14:21:33 Check angles 14:21:33 SkyScan query 14:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 14:21:33 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 14:21:34 Check angles 14:21:34 SkyScan query 14:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.325<-14955 Statuses=0008 0009 14:21:34 Msec=750 True Az=112.995 Ze=-44.325 Az status=0008 Ze status=0009 14:21:34 Check angles 14:21:34 SkyScan query 14:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 14:21:35 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 14:21:35 Check angles 14:21:35 SkyScan query 14:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 14:21:36 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 14:21:36 Check angles 14:21:36 SkyScan query 14:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.16<-19144 Statuses=0008 0009 14:21:36 Msec=3000 True Az=112.995 Ze=-107.16 Az status=0008 Ze status=0009 14:21:37 Check angles 14:21:37 SkyScan query 14:21:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.115<-20541 Statuses=0008 0009 14:21:37 Msec=3750 True Az=112.995 Ze=-128.115 Az status=0008 Ze status=0009 14:21:37 Check angles 14:21:37 SkyScan query 14:21:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.085<-21939 Statuses=0008 0009 14:21:38 Msec=4500 True Az=112.995 Ze=-149.085 Az status=0008 Ze status=0009 14:21:38 Check angles 14:21:38 SkyScan query 14:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.025<-23335 Statuses=0008 0009 14:21:39 Msec=5250 True Az=112.995 Ze=-170.025 Az status=0008 Ze status=0009 14:21:39 Check angles 14:21:39 SkyScan query 14:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:21:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:21:39 Message to Master queued w/err=0: serial=90683 error=0 14:21:44 Received message from Master: op=Filter serial=90684 14:21:44 Color wheel filter change from 0 to 0 14:21:44 FLIGetFilterPos err=0 currentPosition=0 14:21:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:44 Filter is already there-color wheel unchanged 14:21:45 Received message from Master: op=Shutter serial=90685 14:21:45 Shutter LASER open 14:21:45 Received message from Camera: op=State serial=90687 14:21:45 GetSingleValue result=40 Value=cccccccc 14:21:45 SkyScan query 14:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:21:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:45 Parameters OK 14:21:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:45 Set A/D data flow result=40 14:21:45 Set A/D channel type result=40 14:21:45 Set A/D encoding result=40 14:21:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:45 Set channel filter=0.000000e+000 result=40 14:21:45 Config A/D Result=40 14:21:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:45 Get A/D filter: -9.255963e+061 result=40 14:21:45 Get A/D value=-858993460 result=40 14:21:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:45 Parameters OK 14:21:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:45 Set A/D data flow result=40 14:21:45 Set A/D channel type result=40 14:21:45 Set A/D encoding result=40 14:21:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:45 Set channel filter=0.000000e+000 result=40 14:21:45 Config A/D Result=40 14:21:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:45 Get A/D filter: -9.255963e+061 result=40 14:21:45 Get A/D value=-858993460 result=40 14:21:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:45 Aux= 14:21:45 Message to Camera, serial 90687 queued 14:21:54 Received message from Master: op=Shutter serial=90697 14:21:54 Shutter LASER close 14:21:54 Received message from Master: op=PointingHead serial=90701 14:21:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:21:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:21:55 Point started: ret=0 14:21:55 point_skyscan result=0 14:21:55 Check angles 14:21:55 SkyScan query 14:21:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 14:21:56 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 14:21:56 Check angles 14:21:56 SkyScan query 14:21:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 14:21:57 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 14:21:57 Check angles 14:21:57 SkyScan query 14:21:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.95<-18730 Statuses=0008 0009 14:21:57 Msec=1500 True Az=112.995 Ze=-100.95 Az status=0008 Ze status=0009 14:21:58 Check angles 14:21:58 SkyScan query 14:21:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.53<-17302 Statuses=0008 0009 14:21:58 Msec=2250 True Az=112.995 Ze=-79.53 Az status=0008 Ze status=0009 14:21:58 Check angles 14:21:58 SkyScan query 14:21:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.59<-15906 Statuses=0008 0009 14:21:59 Msec=3000 True Az=112.995 Ze=-58.59 Az status=0008 Ze status=0009 14:21:59 Check angles 14:21:59 SkyScan query 14:22:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 14:22:00 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 14:22:00 Check angles 14:22:00 SkyScan query 14:22:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.23<-13082 Statuses=0008 0009 14:22:00 Msec=4500 True Az=112.995 Ze=-16.23 Az status=0008 Ze status=0009 14:22:01 Check angles 14:22:01 SkyScan query 14:22:01 SkyScan query done: ret=0 az=112.995<-7533 ze=4.59<-11694 Statuses=0008 0009 14:22:01 Msec=5250 True Az=112.995 Ze=4.59 Az status=0008 Ze status=0009 14:22:01 Check angles 14:22:01 SkyScan query 14:22:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:22:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:22:02 Message to Master queued w/err=0: serial=90701 error=0 14:22:07 Received message from Master: op=Filter serial=90702 14:22:07 Color wheel filter change from 0 to 0 14:22:07 FLIGetFilterPos err=0 currentPosition=0 14:22:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:07 Filter is already there-color wheel unchanged 14:22:07 Received message from Master: op=Shutter serial=90703 14:22:07 Shutter LASER close 14:22:07 Received message from Camera: op=State serial=90705 14:22:07 GetSingleValue result=40 Value=cccccccc 14:22:07 SkyScan query 14:22:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:22:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:08 Parameters OK 14:22:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:08 Set A/D data flow result=40 14:22:08 Set A/D channel type result=40 14:22:08 Set A/D encoding result=40 14:22:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:08 Set channel filter=0.000000e+000 result=40 14:22:08 Config A/D Result=40 14:22:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:08 Get A/D filter: -9.255963e+061 result=40 14:22:08 Get A/D value=-858993460 result=40 14:22:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:08 Parameters OK 14:22:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:08 Set A/D data flow result=40 14:22:08 Set A/D channel type result=40 14:22:08 Set A/D encoding result=40 14:22:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:08 Set channel filter=0.000000e+000 result=40 14:22:08 Config A/D Result=40 14:22:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:08 Get A/D filter: -9.255963e+061 result=40 14:22:08 Get A/D value=-858993460 result=40 14:22:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:08 Aux= 14:22:08 Message to Camera, serial 90705 queued 14:22:45 Received message from Master: op=PointingHead serial=90718 14:22:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:22:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:22:45 Point started: ret=0 14:22:45 point_skyscan result=0 14:22:46 Check angles 14:22:46 SkyScan query 14:22:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:22:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:22:46 Message to Master queued w/err=0: serial=90718 error=0 14:22:51 Received message from Master: op=Filter serial=90719 14:22:51 Color wheel filter change from 0 to 0 14:22:51 FLIGetFilterPos err=0 currentPosition=0 14:22:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:51 Filter is already there-color wheel unchanged 14:22:52 Received message from Master: op=Shutter serial=90720 14:22:52 Shutter LASER close 14:22:52 Received message from Camera: op=State serial=90722 14:22:52 GetSingleValue result=40 Value=cccccccc 14:22:52 SkyScan query 14:22:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:22:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:52 Parameters OK 14:22:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:52 Set A/D data flow result=40 14:22:52 Set A/D channel type result=40 14:22:52 Set A/D encoding result=40 14:22:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:52 Set channel filter=0.000000e+000 result=40 14:22:52 Config A/D Result=40 14:22:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:52 Get A/D filter: -9.255963e+061 result=40 14:22:52 Get A/D value=-858993460 result=40 14:22:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:52 Parameters OK 14:22:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:52 Set A/D data flow result=40 14:22:52 Set A/D channel type result=40 14:22:52 Set A/D encoding result=40 14:22:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:52 Set channel filter=0.000000e+000 result=40 14:22:52 Config A/D Result=40 14:22:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:52 Get A/D filter: -9.255963e+061 result=40 14:22:52 Get A/D value=-858993460 result=40 14:22:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:52 Aux= 14:22:52 Message to Camera, serial 90722 queued 14:23:29 Received message from Master: op=PointingHead serial=90735 14:23:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:23:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:23:29 Point started: ret=0 14:23:29 point_skyscan result=0 14:23:30 Check angles 14:23:30 SkyScan query 14:23:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:23:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:23:31 Message to Master queued w/err=0: serial=90735 error=0 14:23:36 Received message from Master: op=Filter serial=90736 14:23:36 Color wheel filter change from 0 to 0 14:23:36 FLIGetFilterPos err=0 currentPosition=0 14:23:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:36 Filter is already there-color wheel unchanged 14:23:36 Received message from Master: op=Shutter serial=90737 14:23:36 Shutter LASER close 14:23:36 Received message from Camera: op=State serial=90739 14:23:36 GetSingleValue result=40 Value=cccccccc 14:23:36 SkyScan query 14:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:23:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:36 Parameters OK 14:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:36 Set A/D data flow result=40 14:23:36 Set A/D channel type result=40 14:23:36 Set A/D encoding result=40 14:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:36 Set channel filter=0.000000e+000 result=40 14:23:36 Config A/D Result=40 14:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:36 Get A/D filter: -9.255963e+061 result=40 14:23:36 Get A/D value=-858993460 result=40 14:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:36 Parameters OK 14:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:36 Set A/D data flow result=40 14:23:36 Set A/D channel type result=40 14:23:36 Set A/D encoding result=40 14:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:36 Set channel filter=0.000000e+000 result=40 14:23:36 Config A/D Result=40 14:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:36 Get A/D filter: -9.255963e+061 result=40 14:23:36 Get A/D value=-858993460 result=40 14:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:36 Aux= 14:23:36 Message to Camera, serial 90739 queued [UTC 2019-3-3 14:23:50] 14:24:13 Received message from Master: op=PointingHead serial=90752 14:24:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:24:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:24:14 Point started: ret=0 14:24:14 point_skyscan result=0 14:24:14 Check angles 14:24:14 SkyScan query 14:24:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:24:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:24:15 Message to Master queued w/err=0: serial=90752 error=0 14:24:20 Received message from Master: op=Filter serial=90753 14:24:20 Color wheel filter change from 0 to 0 14:24:20 FLIGetFilterPos err=0 currentPosition=0 14:24:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:20 Filter is already there-color wheel unchanged 14:24:20 Received message from Master: op=Shutter serial=90754 14:24:20 Shutter LASER close 14:24:20 Received message from Camera: op=State serial=90756 14:24:20 GetSingleValue result=40 Value=cccccccc 14:24:20 SkyScan query 14:24:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:24:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:21 Parameters OK 14:24:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:21 Set A/D data flow result=40 14:24:21 Set A/D channel type result=40 14:24:21 Set A/D encoding result=40 14:24:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:21 Set channel filter=0.000000e+000 result=40 14:24:21 Config A/D Result=40 14:24:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:21 Get A/D filter: -9.255963e+061 result=40 14:24:21 Get A/D value=-858993460 result=40 14:24:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:21 Parameters OK 14:24:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:21 Set A/D data flow result=40 14:24:21 Set A/D channel type result=40 14:24:21 Set A/D encoding result=40 14:24:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:21 Set channel filter=0.000000e+000 result=40 14:24:21 Config A/D Result=40 14:24:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:21 Get A/D filter: -9.255963e+061 result=40 14:24:21 Get A/D value=-858993460 result=40 14:24:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:21 Aux= 14:24:21 Message to Camera, serial 90756 queued 14:24:58 Received message from Master: op=PointingHead serial=90769 14:24:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:24:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:24:58 Point started: ret=0 14:24:58 point_skyscan result=0 14:24:59 Check angles 14:24:59 SkyScan query 14:24:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 14:24:59 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 14:24:59 Check angles 14:24:59 SkyScan query 14:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 14:25:00 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 14:25:00 Check angles 14:25:00 SkyScan query 14:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 14:25:01 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 14:25:01 Check angles 14:25:01 SkyScan query 14:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 14:25:01 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 14:25:02 Check angles 14:25:02 SkyScan query 14:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.355<-19157 Statuses=0008 0009 14:25:02 Msec=3000 True Az=112.995 Ze=-107.355 Az status=0008 Ze status=0009 14:25:02 Check angles 14:25:02 SkyScan query 14:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 14:25:03 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 14:25:03 Check angles 14:25:03 SkyScan query 14:25:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.12<-22008 Statuses=0008 0009 14:25:04 Msec=4500 True Az=112.995 Ze=-150.12 Az status=0008 Ze status=0009 14:25:04 Check angles 14:25:04 SkyScan query 14:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0008 0009 14:25:05 Msec=5250 True Az=112.995 Ze=-170.955 Az status=0008 Ze status=0009 14:25:05 Check angles 14:25:05 SkyScan query 14:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:25:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:25:05 Message to Master queued w/err=0: serial=90769 error=0 14:25:10 Received message from Master: op=Filter serial=90770 14:25:10 Color wheel filter change from 0 to 0 14:25:10 FLIGetFilterPos err=0 currentPosition=0 14:25:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:10 Filter is already there-color wheel unchanged 14:25:11 Received message from Master: op=Shutter serial=90771 14:25:11 Shutter LASER open 14:25:11 Received message from Camera: op=State serial=90773 14:25:11 GetSingleValue result=40 Value=cccccccc 14:25:11 SkyScan query 14:25:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:25:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:11 Parameters OK 14:25:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:11 Set A/D data flow result=40 14:25:11 Set A/D channel type result=40 14:25:11 Set A/D encoding result=40 14:25:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:11 Set channel filter=0.000000e+000 result=40 14:25:11 Config A/D Result=40 14:25:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:11 Get A/D filter: -9.255963e+061 result=40 14:25:11 Get A/D value=-858993460 result=40 14:25:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:11 Parameters OK 14:25:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:11 Set A/D data flow result=40 14:25:11 Set A/D channel type result=40 14:25:11 Set A/D encoding result=40 14:25:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:11 Set channel filter=0.000000e+000 result=40 14:25:11 Config A/D Result=40 14:25:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:11 Get A/D filter: -9.255963e+061 result=40 14:25:11 Get A/D value=-858993460 result=40 14:25:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:11 Aux= 14:25:11 Message to Camera, serial 90773 queued 14:25:20 Received message from Master: op=Shutter serial=90783 14:25:20 Shutter LASER close 14:25:20 Received message from Master: op=PointingHead serial=90787 14:25:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:25:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:25:21 Point started: ret=0 14:25:21 point_skyscan result=0 14:25:21 Check angles 14:25:21 SkyScan query 14:25:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 14:25:22 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 14:25:22 Check angles 14:25:22 SkyScan query 14:25:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 14:25:23 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 14:25:23 Check angles 14:25:23 SkyScan query 14:25:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 14:25:23 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 14:25:24 Check angles 14:25:24 SkyScan query 14:25:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.25<-17350 Statuses=0008 0009 14:25:24 Msec=2250 True Az=112.995 Ze=-80.25 Az status=0008 Ze status=0009 14:25:24 Check angles 14:25:24 SkyScan query 14:25:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.31<-15954 Statuses=0008 0009 14:25:25 Msec=3000 True Az=112.995 Ze=-59.31 Az status=0008 Ze status=0009 14:25:25 Check angles 14:25:25 SkyScan query 14:25:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.325<-14555 Statuses=0008 0009 14:25:26 Msec=3750 True Az=112.995 Ze=-38.325 Az status=0008 Ze status=0009 14:25:26 Check angles 14:25:26 SkyScan query 14:25:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.385<-13159 Statuses=0008 0009 14:25:26 Msec=4500 True Az=112.995 Ze=-17.385 Az status=0008 Ze status=0009 14:25:27 Check angles 14:25:27 SkyScan query 14:25:27 SkyScan query done: ret=0 az=112.995<-7533 ze=3.585<-11761 Statuses=0008 0009 14:25:27 Msec=5250 True Az=112.995 Ze=3.585 Az status=0008 Ze status=0009 14:25:27 Check angles 14:25:27 SkyScan query 14:25:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:25:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:25:28 Message to Master queued w/err=0: serial=90787 error=0 14:25:33 Received message from Master: op=Filter serial=90788 14:25:33 Color wheel filter change from 0 to 0 14:25:33 FLIGetFilterPos err=0 currentPosition=0 14:25:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:33 Filter is already there-color wheel unchanged 14:25:33 Received message from Master: op=Shutter serial=90789 14:25:33 Shutter LASER close 14:25:33 Received message from Camera: op=State serial=90791 14:25:33 GetSingleValue result=40 Value=cccccccc 14:25:33 SkyScan query 14:25:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:25:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:34 Parameters OK 14:25:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:34 Set A/D data flow result=40 14:25:34 Set A/D channel type result=40 14:25:34 Set A/D encoding result=40 14:25:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:34 Set channel filter=0.000000e+000 result=40 14:25:34 Config A/D Result=40 14:25:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:34 Get A/D filter: -9.255963e+061 result=40 14:25:34 Get A/D value=-858993460 result=40 14:25:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:34 Parameters OK 14:25:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:34 Set A/D data flow result=40 14:25:34 Set A/D channel type result=40 14:25:34 Set A/D encoding result=40 14:25:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:34 Set channel filter=0.000000e+000 result=40 14:25:34 Config A/D Result=40 14:25:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:34 Get A/D filter: -9.255963e+061 result=40 14:25:34 Get A/D value=-858993460 result=40 14:25:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:34 Aux= 14:25:34 Message to Camera, serial 90791 queued 14:26:11 Received message from Master: op=PointingHead serial=90804 14:26:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:26:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:26:11 Point started: ret=0 14:26:11 point_skyscan result=0 14:26:12 Check angles 14:26:12 SkyScan query 14:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:26:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:26:12 Message to Master queued w/err=0: serial=90804 error=0 14:26:17 Received message from Master: op=Filter serial=90805 14:26:17 Color wheel filter change from 0 to 0 14:26:17 FLIGetFilterPos err=0 currentPosition=0 14:26:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:17 Filter is already there-color wheel unchanged 14:26:18 Received message from Master: op=Shutter serial=90806 14:26:18 Shutter LASER close 14:26:18 Received message from Camera: op=State serial=90808 14:26:18 GetSingleValue result=40 Value=cccccccc 14:26:18 SkyScan query 14:26:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:26:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:18 Parameters OK 14:26:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:18 Set A/D data flow result=40 14:26:18 Set A/D channel type result=40 14:26:18 Set A/D encoding result=40 14:26:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:18 Set channel filter=0.000000e+000 result=40 14:26:18 Config A/D Result=40 14:26:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:18 Get A/D filter: -9.255963e+061 result=40 14:26:18 Get A/D value=-858993460 result=40 14:26:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:18 Parameters OK 14:26:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:18 Set A/D data flow result=40 14:26:18 Set A/D channel type result=40 14:26:18 Set A/D encoding result=40 14:26:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:18 Set channel filter=0.000000e+000 result=40 14:26:18 Config A/D Result=40 14:26:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:18 Get A/D filter: -9.255963e+061 result=40 14:26:18 Get A/D value=-858993460 result=40 14:26:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:18 Aux= 14:26:18 Message to Camera, serial 90808 queued 14:26:55 Received message from Master: op=PointingHead serial=90821 14:26:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:26:55 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:26:55 Point started: ret=0 14:26:55 point_skyscan result=0 14:26:56 Check angles 14:26:56 SkyScan query 14:26:57 SkyScan query done: ret=0 az=135.975<-9065 ze=-6.51<-12434 Statuses=0009 0008 14:26:57 Msec=0 True Az=135.975 Ze=-6.51 Az status=0009 Ze status=0008 14:26:57 Check angles 14:26:57 SkyScan query 14:26:57 SkyScan query done: ret=0 az=153.765<-10251 ze=-6.495<-12433 Statuses=0009 0008 14:26:57 Msec=750 True Az=153.765 Ze=-6.495 Az status=0009 Ze status=0008 14:26:58 Check angles 14:26:58 SkyScan query 14:26:58 SkyScan query done: ret=0 az=171.615<-11441 ze=-6.495<-12433 Statuses=0009 0008 14:26:58 Msec=1500 True Az=171.615 Ze=-6.495 Az status=0009 Ze status=0008 14:26:58 Check angles 14:26:58 SkyScan query 14:26:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:26:59 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:26:59 Message to Master queued w/err=0: serial=90821 error=0 14:27:04 Received message from Master: op=Filter serial=90822 14:27:04 Color wheel filter change from 0 to 0 14:27:04 FLIGetFilterPos err=0 currentPosition=0 14:27:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:04 Filter is already there-color wheel unchanged 14:27:04 Received message from Master: op=Shutter serial=90823 14:27:04 Shutter LASER close 14:27:04 Received message from Camera: op=State serial=90825 14:27:04 GetSingleValue result=40 Value=cccccccc 14:27:04 SkyScan query 14:27:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:27:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:05 Parameters OK 14:27:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:05 Set A/D data flow result=40 14:27:05 Set A/D channel type result=40 14:27:05 Set A/D encoding result=40 14:27:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:05 Set channel filter=0.000000e+000 result=40 14:27:05 Config A/D Result=40 14:27:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:05 Get A/D filter: -9.255963e+061 result=40 14:27:05 Get A/D value=-858993460 result=40 14:27:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:05 Parameters OK 14:27:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:05 Set A/D data flow result=40 14:27:05 Set A/D channel type result=40 14:27:05 Set A/D encoding result=40 14:27:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:05 Set channel filter=0.000000e+000 result=40 14:27:05 Config A/D Result=40 14:27:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:05 Get A/D filter: -9.255963e+061 result=40 14:27:05 Get A/D value=-858993460 result=40 14:27:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:05 Aux= 14:27:05 Message to Camera, serial 90825 queued 14:27:42 Received message from Master: op=PointingHead serial=90838 14:27:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:27:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:27:42 Point started: ret=0 14:27:42 point_skyscan result=0 14:27:43 Check angles 14:27:43 SkyScan query 14:27:43 SkyScan query done: ret=0 az=153.315<-10221 ze=6.51<-11566 Statuses=0009 0008 14:27:43 Msec=0 True Az=153.315 Ze=6.51 Az status=0009 Ze status=0008 14:27:43 Check angles 14:27:43 SkyScan query 14:27:44 SkyScan query done: ret=0 az=135.39<-9026 ze=6.495<-11567 Statuses=0009 0008 14:27:44 Msec=750 True Az=135.39 Ze=6.495 Az status=0009 Ze status=0008 14:27:44 Check angles 14:27:44 SkyScan query 14:27:45 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 14:27:45 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 14:27:45 Check angles 14:27:45 SkyScan query 14:27:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:27:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:27:46 Message to Master queued w/err=0: serial=90838 error=0 14:27:51 Received message from Master: op=Filter serial=90839 14:27:51 Color wheel filter change from 0 to 0 14:27:51 FLIGetFilterPos err=0 currentPosition=0 14:27:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:51 Filter is already there-color wheel unchanged 14:27:51 Received message from Master: op=Shutter serial=90840 14:27:51 Shutter LASER close 14:27:51 Received message from Camera: op=State serial=90842 14:27:51 GetSingleValue result=40 Value=cccccccc 14:27:51 SkyScan query 14:27:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:27:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:51 Parameters OK 14:27:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:51 Set A/D data flow result=40 14:27:51 Set A/D channel type result=40 14:27:51 Set A/D encoding result=40 14:27:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:51 Set channel filter=0.000000e+000 result=40 14:27:51 Config A/D Result=40 14:27:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:51 Get A/D filter: -9.255963e+061 result=40 14:27:51 Get A/D value=-858993460 result=40 14:27:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:51 Parameters OK 14:27:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:51 Set A/D data flow result=40 14:27:51 Set A/D channel type result=40 14:27:51 Set A/D encoding result=40 14:27:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:51 Set channel filter=0.000000e+000 result=40 14:27:51 Config A/D Result=40 14:27:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:51 Get A/D filter: -9.255963e+061 result=40 14:27:51 Get A/D value=-858993460 result=40 14:27:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:51 Aux= 14:27:51 Message to Camera, serial 90842 queued 14:28:28 Received message from Master: op=PointingHead serial=90855 14:28:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:28:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:28:28 Point started: ret=0 14:28:28 point_skyscan result=0 14:28:29 Check angles 14:28:29 SkyScan query 14:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 14:28:30 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 14:28:30 Check angles 14:28:30 SkyScan query 14:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 14:28:31 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 14:28:31 Check angles 14:28:31 SkyScan query 14:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 14:28:31 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 14:28:31 Check angles 14:28:31 SkyScan query 14:28:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 14:28:32 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 14:28:32 Check angles 14:28:32 SkyScan query 14:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.37<-19158 Statuses=0008 0009 14:28:33 Msec=3000 True Az=112.995 Ze=-107.37 Az status=0008 Ze status=0009 14:28:33 Check angles 14:28:33 SkyScan query 14:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.325<-20555 Statuses=0008 0009 14:28:34 Msec=3750 True Az=112.995 Ze=-128.325 Az status=0008 Ze status=0009 14:28:34 Check angles 14:28:34 SkyScan query 14:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.295<-21953 Statuses=0008 0009 14:28:34 Msec=4500 True Az=112.995 Ze=-149.295 Az status=0008 Ze status=0009 14:28:34 Check angles 14:28:34 SkyScan query 14:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.235<-23349 Statuses=0008 0009 14:28:35 Msec=5250 True Az=112.995 Ze=-170.235 Az status=0008 Ze status=0009 14:28:35 Check angles 14:28:35 SkyScan query 14:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:28:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:28:36 Message to Master queued w/err=0: serial=90855 error=0 14:28:41 Received message from Master: op=Filter serial=90856 14:28:41 Color wheel filter change from 0 to 0 14:28:41 FLIGetFilterPos err=0 currentPosition=0 14:28:41 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:41 Filter is already there-color wheel unchanged 14:28:41 Received message from Master: op=Shutter serial=90857 14:28:41 Shutter LASER open 14:28:41 Received message from Camera: op=State serial=90859 14:28:41 GetSingleValue result=40 Value=cccccccc 14:28:41 SkyScan query 14:28:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:28:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:42 Parameters OK 14:28:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:42 Set A/D data flow result=40 14:28:42 Set A/D channel type result=40 14:28:42 Set A/D encoding result=40 14:28:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:42 Set channel filter=0.000000e+000 result=40 14:28:42 Config A/D Result=40 14:28:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:42 Get A/D filter: -9.255963e+061 result=40 14:28:42 Get A/D value=-858993460 result=40 14:28:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:42 Parameters OK 14:28:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:42 Set A/D data flow result=40 14:28:42 Set A/D channel type result=40 14:28:42 Set A/D encoding result=40 14:28:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:42 Set channel filter=0.000000e+000 result=40 14:28:42 Config A/D Result=40 14:28:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:42 Get A/D filter: -9.255963e+061 result=40 14:28:42 Get A/D value=-858993460 result=40 14:28:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:42 Aux= 14:28:42 Message to Camera, serial 90859 queued 14:28:50 Received message from Master: op=Shutter serial=90869 14:28:50 Shutter LASER close 14:28:51 Received message from Master: op=PointingHead serial=90873 14:28:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:28:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:28:51 Point started: ret=0 14:28:51 point_skyscan result=0 14:28:52 Check angles 14:28:52 SkyScan query 14:28:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.55<-21570 Statuses=0008 0009 14:28:52 Msec=0 True Az=112.995 Ze=-143.55 Az status=0008 Ze status=0009 14:28:52 Check angles 14:28:52 SkyScan query 14:28:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 14:28:53 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 14:28:53 Check angles 14:28:53 SkyScan query 14:28:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 14:28:54 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 14:28:54 Check angles 14:28:54 SkyScan query 14:28:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 14:28:55 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 14:28:55 Check angles 14:28:55 SkyScan query 14:28:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 14:28:55 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 14:28:55 Check angles 14:28:55 SkyScan query 14:28:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.89<-14526 Statuses=0008 0009 14:28:56 Msec=3750 True Az=112.995 Ze=-37.89 Az status=0008 Ze status=0009 14:28:56 Check angles 14:28:56 SkyScan query 14:28:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 14:28:57 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 14:28:57 Check angles 14:28:57 SkyScan query 14:28:58 SkyScan query done: ret=0 az=112.995<-7533 ze=4.02<-11732 Statuses=0008 0009 14:28:58 Msec=5250 True Az=112.995 Ze=4.02 Az status=0008 Ze status=0009 14:28:58 Check angles 14:28:58 SkyScan query 14:28:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:28:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:28:58 Message to Master queued w/err=0: serial=90873 error=0 14:29:03 Received message from Master: op=Filter serial=90874 14:29:03 Color wheel filter change from 0 to 0 14:29:03 FLIGetFilterPos err=0 currentPosition=0 14:29:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:03 Filter is already there-color wheel unchanged 14:29:03 Received message from Master: op=Shutter serial=90875 14:29:03 Shutter LASER close 14:29:04 Received message from Camera: op=State serial=90877 14:29:04 GetSingleValue result=40 Value=cccccccc 14:29:04 SkyScan query 14:29:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:29:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:04 Parameters OK 14:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:04 Set A/D data flow result=40 14:29:04 Set A/D channel type result=40 14:29:04 Set A/D encoding result=40 14:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:04 Set channel filter=0.000000e+000 result=40 14:29:04 Config A/D Result=40 14:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:04 Get A/D filter: -9.255963e+061 result=40 14:29:04 Get A/D value=-858993460 result=40 14:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:04 Parameters OK 14:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:04 Set A/D data flow result=40 14:29:04 Set A/D channel type result=40 14:29:04 Set A/D encoding result=40 14:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:04 Set channel filter=0.000000e+000 result=40 14:29:04 Config A/D Result=40 14:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:04 Get A/D filter: -9.255963e+061 result=40 14:29:04 Get A/D value=-858993460 result=40 14:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:04 Aux= 14:29:04 Message to Camera, serial 90877 queued 14:29:41 Received message from Master: op=PointingHead serial=90890 14:29:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:29:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:29:41 Point started: ret=0 14:29:41 point_skyscan result=0 14:29:42 Check angles 14:29:42 SkyScan query 14:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:29:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:29:43 Message to Master queued w/err=0: serial=90890 error=0 14:29:48 Received message from Master: op=Filter serial=90891 14:29:48 Color wheel filter change from 0 to 0 14:29:48 FLIGetFilterPos err=0 currentPosition=0 14:29:48 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:48 Filter is already there-color wheel unchanged 14:29:48 Received message from Master: op=Shutter serial=90892 14:29:48 Shutter LASER close 14:29:48 Received message from Camera: op=State serial=90894 14:29:48 GetSingleValue result=40 Value=cccccccc 14:29:48 SkyScan query 14:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:29:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:49 Parameters OK 14:29:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:49 Set A/D data flow result=40 14:29:49 Set A/D channel type result=40 14:29:49 Set A/D encoding result=40 14:29:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:49 Set channel filter=0.000000e+000 result=40 14:29:49 Config A/D Result=40 14:29:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:49 Get A/D filter: -9.255963e+061 result=40 14:29:49 Get A/D value=-858993460 result=40 14:29:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:49 Parameters OK 14:29:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:49 Set A/D data flow result=40 14:29:49 Set A/D channel type result=40 14:29:49 Set A/D encoding result=40 14:29:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:49 Set channel filter=0.000000e+000 result=40 14:29:49 Config A/D Result=40 14:29:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:49 Get A/D filter: -9.255963e+061 result=40 14:29:49 Get A/D value=-858993460 result=40 14:29:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:49 Aux= 14:29:49 Message to Camera, serial 90894 queued 14:30:25 Received message from Master: op=PointingHead serial=90907 14:30:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:30:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:30:26 Point started: ret=0 14:30:26 point_skyscan result=0 14:30:27 Check angles 14:30:27 SkyScan query 14:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:30:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:30:27 Message to Master queued w/err=0: serial=90907 error=0 14:30:32 Received message from Master: op=Filter serial=90908 14:30:32 Color wheel filter change from 0 to 0 14:30:32 FLIGetFilterPos err=0 currentPosition=0 14:30:32 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:32 Filter is already there-color wheel unchanged 14:30:32 Received message from Master: op=Shutter serial=90909 14:30:32 Shutter LASER close 14:30:32 Received message from Camera: op=State serial=90911 14:30:32 GetSingleValue result=40 Value=cccccccc 14:30:32 SkyScan query 14:30:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:30:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:33 Parameters OK 14:30:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:33 Set A/D data flow result=40 14:30:33 Set A/D channel type result=40 14:30:33 Set A/D encoding result=40 14:30:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:33 Set channel filter=0.000000e+000 result=40 14:30:33 Config A/D Result=40 14:30:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:33 Get A/D filter: -9.255963e+061 result=40 14:30:33 Get A/D value=-858993460 result=40 14:30:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:33 Parameters OK 14:30:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:33 Set A/D data flow result=40 14:30:33 Set A/D channel type result=40 14:30:33 Set A/D encoding result=40 14:30:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:33 Set channel filter=0.000000e+000 result=40 14:30:33 Config A/D Result=40 14:30:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:33 Get A/D filter: -9.255963e+061 result=40 14:30:33 Get A/D value=-858993460 result=40 14:30:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:33 Aux= 14:30:33 Message to Camera, serial 90911 queued 14:31:10 Received message from Master: op=PointingHead serial=90924 14:31:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:31:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:31:10 Point started: ret=0 14:31:10 point_skyscan result=0 14:31:11 Check angles 14:31:11 SkyScan query 14:31:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:31:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:31:11 Message to Master queued w/err=0: serial=90924 error=0 14:31:16 Received message from Master: op=Filter serial=90925 14:31:16 Color wheel filter change from 0 to 0 14:31:16 FLIGetFilterPos err=0 currentPosition=0 14:31:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:16 Filter is already there-color wheel unchanged 14:31:17 Received message from Master: op=Shutter serial=90926 14:31:17 Shutter LASER close 14:31:17 Received message from Camera: op=State serial=90928 14:31:17 GetSingleValue result=40 Value=cccccccc 14:31:17 SkyScan query 14:31:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:31:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:17 Parameters OK 14:31:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:17 Set A/D data flow result=40 14:31:17 Set A/D channel type result=40 14:31:17 Set A/D encoding result=40 14:31:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:17 Set channel filter=0.000000e+000 result=40 14:31:17 Config A/D Result=40 14:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:17 Get A/D filter: -9.255963e+061 result=40 14:31:17 Get A/D value=-858993460 result=40 14:31:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:17 Parameters OK 14:31:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:17 Set A/D data flow result=40 14:31:17 Set A/D channel type result=40 14:31:17 Set A/D encoding result=40 14:31:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:17 Set channel filter=0.000000e+000 result=40 14:31:17 Config A/D Result=40 14:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:17 Get A/D filter: -9.255963e+061 result=40 14:31:17 Get A/D value=-858993460 result=40 14:31:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:17 Aux= 14:31:17 Message to Camera, serial 90928 queued 14:31:54 Received message from Master: op=PointingHead serial=90941 14:31:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:31:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:31:54 Point started: ret=0 14:31:54 point_skyscan result=0 14:31:55 Check angles 14:31:55 SkyScan query 14:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 14:31:56 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 14:31:56 Check angles 14:31:56 SkyScan query 14:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 14:31:56 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 14:31:57 Check angles 14:31:57 SkyScan query 14:31:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 14:31:57 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 14:31:57 Check angles 14:31:57 SkyScan query 14:31:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 14:31:58 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 14:31:58 Check angles 14:31:58 SkyScan query 14:31:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.385<-19159 Statuses=0008 0009 14:31:59 Msec=3000 True Az=112.995 Ze=-107.385 Az status=0008 Ze status=0009 14:31:59 Check angles 14:31:59 SkyScan query 14:31:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 14:31:59 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 14:32:00 Check angles 14:32:00 SkyScan query 14:32:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.295<-21953 Statuses=0008 0009 14:32:00 Msec=4500 True Az=112.995 Ze=-149.295 Az status=0008 Ze status=0009 14:32:00 Check angles 14:32:00 SkyScan query 14:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.235<-23349 Statuses=0008 0009 14:32:01 Msec=5250 True Az=112.995 Ze=-170.235 Az status=0008 Ze status=0009 14:32:01 Check angles 14:32:01 SkyScan query 14:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:32:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:32:02 Message to Master queued w/err=0: serial=90941 error=0 14:32:07 Received message from Master: op=Filter serial=90942 14:32:07 Color wheel filter change from 0 to 0 14:32:07 FLIGetFilterPos err=0 currentPosition=0 14:32:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:07 Filter is already there-color wheel unchanged 14:32:07 Received message from Master: op=Shutter serial=90943 14:32:07 Shutter LASER open 14:32:07 Received message from Camera: op=State serial=90945 14:32:07 GetSingleValue result=40 Value=cccccccc 14:32:07 SkyScan query 14:32:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:32:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:08 Parameters OK 14:32:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:08 Set A/D data flow result=40 14:32:08 Set A/D channel type result=40 14:32:08 Set A/D encoding result=40 14:32:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:08 Set channel filter=0.000000e+000 result=40 14:32:08 Config A/D Result=40 14:32:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:08 Get A/D filter: -9.255963e+061 result=40 14:32:08 Get A/D value=-858993460 result=40 14:32:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:08 Parameters OK 14:32:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:08 Set A/D data flow result=40 14:32:08 Set A/D channel type result=40 14:32:08 Set A/D encoding result=40 14:32:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:08 Set channel filter=0.000000e+000 result=40 14:32:08 Config A/D Result=40 14:32:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:08 Get A/D filter: -9.255963e+061 result=40 14:32:08 Get A/D value=-858993460 result=40 14:32:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:08 Aux= 14:32:08 Message to Camera, serial 90945 queued 14:32:16 Received message from Master: op=Shutter serial=90955 14:32:16 Shutter LASER close 14:32:17 Received message from Master: op=PointingHead serial=90959 14:32:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:32:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:32:17 Point started: ret=0 14:32:17 point_skyscan result=0 14:32:18 Check angles 14:32:18 SkyScan query 14:32:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 14:32:18 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 14:32:18 Check angles 14:32:18 SkyScan query 14:32:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.43<-20162 Statuses=0008 0009 14:32:19 Msec=750 True Az=112.995 Ze=-122.43 Az status=0008 Ze status=0009 14:32:19 Check angles 14:32:19 SkyScan query 14:32:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 14:32:20 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 14:32:20 Check angles 14:32:20 SkyScan query 14:32:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.505<-17367 Statuses=0008 0009 14:32:21 Msec=2250 True Az=112.995 Ze=-80.505 Az status=0008 Ze status=0009 14:32:21 Check angles 14:32:21 SkyScan query 14:32:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.565<-15971 Statuses=0008 0009 14:32:21 Msec=3000 True Az=112.995 Ze=-59.565 Az status=0008 Ze status=0009 14:32:21 Check angles 14:32:21 SkyScan query 14:32:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.61<-14574 Statuses=0008 0009 14:32:22 Msec=3750 True Az=112.995 Ze=-38.61 Az status=0008 Ze status=0009 14:32:22 Check angles 14:32:22 SkyScan query 14:32:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.655<-13177 Statuses=0008 0009 14:32:23 Msec=4500 True Az=112.995 Ze=-17.655 Az status=0008 Ze status=0009 14:32:23 Check angles 14:32:23 SkyScan query 14:32:24 SkyScan query done: ret=0 az=112.995<-7533 ze=3.315<-11779 Statuses=0008 0009 14:32:24 Msec=5250 True Az=112.995 Ze=3.315 Az status=0008 Ze status=0009 14:32:24 Check angles 14:32:24 SkyScan query 14:32:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:32:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:32:24 Message to Master queued w/err=0: serial=90959 error=0 14:32:29 Received message from Master: op=Filter serial=90960 14:32:29 Color wheel filter change from 0 to 0 14:32:29 FLIGetFilterPos err=0 currentPosition=0 14:32:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:29 Filter is already there-color wheel unchanged 14:32:29 Received message from Master: op=Shutter serial=90961 14:32:29 Shutter LASER close 14:32:30 Received message from Camera: op=State serial=90963 14:32:30 GetSingleValue result=40 Value=cccccccc 14:32:30 SkyScan query 14:32:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:32:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:30 Parameters OK 14:32:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:30 Set A/D data flow result=40 14:32:30 Set A/D channel type result=40 14:32:30 Set A/D encoding result=40 14:32:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:30 Set channel filter=0.000000e+000 result=40 14:32:30 Config A/D Result=40 14:32:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:30 Get A/D filter: -9.255963e+061 result=40 14:32:30 Get A/D value=-858993460 result=40 14:32:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:30 Parameters OK 14:32:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:30 Set A/D data flow result=40 14:32:30 Set A/D channel type result=40 14:32:30 Set A/D encoding result=40 14:32:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:30 Set channel filter=0.000000e+000 result=40 14:32:30 Config A/D Result=40 14:32:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:30 Get A/D filter: -9.255963e+061 result=40 14:32:30 Get A/D value=-858993460 result=40 14:32:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:30 Aux= 14:32:30 Message to Camera, serial 90963 queued 14:33:07 Received message from Master: op=PointingHead serial=90976 14:33:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:33:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:33:07 Point started: ret=0 14:33:07 point_skyscan result=0 14:33:08 Check angles 14:33:08 SkyScan query 14:33:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:33:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:33:09 Message to Master queued w/err=0: serial=90976 error=0 14:33:14 Received message from Master: op=Filter serial=90977 14:33:14 Color wheel filter change from 0 to 0 14:33:14 FLIGetFilterPos err=0 currentPosition=0 14:33:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:14 Filter is already there-color wheel unchanged 14:33:14 Received message from Master: op=Shutter serial=90978 14:33:14 Shutter LASER close 14:33:14 Received message from Camera: op=State serial=90980 14:33:14 GetSingleValue result=40 Value=cccccccc 14:33:14 SkyScan query 14:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:33:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:15 Parameters OK 14:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:15 Set A/D data flow result=40 14:33:15 Set A/D channel type result=40 14:33:15 Set A/D encoding result=40 14:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:15 Set channel filter=0.000000e+000 result=40 14:33:15 Config A/D Result=40 14:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:15 Get A/D filter: -9.255963e+061 result=40 14:33:15 Get A/D value=-858993460 result=40 14:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:15 Parameters OK 14:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:15 Set A/D data flow result=40 14:33:15 Set A/D channel type result=40 14:33:15 Set A/D encoding result=40 14:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:15 Set channel filter=0.000000e+000 result=40 14:33:15 Config A/D Result=40 14:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:15 Get A/D filter: -9.255963e+061 result=40 14:33:15 Get A/D value=-858993460 result=40 14:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:15 Aux= 14:33:15 Message to Camera, serial 90980 queued 14:33:38 Received message from Master: op=Identify serial=90981 14:33:51 Received message from Master: op=PointingHead serial=90996 14:33:51 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:33:51 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:33:52 Point started: ret=0 14:33:52 point_skyscan result=0 14:33:52 Check angles 14:33:52 SkyScan query 14:33:53 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 14:33:53 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 14:33:53 Check angles 14:33:53 SkyScan query 14:33:54 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 14:33:54 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 14:33:54 Check angles 14:33:54 SkyScan query 14:33:55 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 14:33:55 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 14:33:55 Check angles 14:33:55 SkyScan query 14:33:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:33:55 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:33:55 Message to Master queued w/err=0: serial=90996 error=0 14:34:00 Received message from Master: op=Filter serial=90997 14:34:00 Color wheel filter change from 0 to 0 14:34:00 FLIGetFilterPos err=0 currentPosition=0 14:34:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:00 Filter is already there-color wheel unchanged 14:34:00 Received message from Master: op=Shutter serial=90998 14:34:00 Shutter LASER close 14:34:00 Received message from Camera: op=State serial=91000 14:34:00 GetSingleValue result=40 Value=cccccccc 14:34:00 SkyScan query 14:34:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:34:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:01 Parameters OK 14:34:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:01 Set A/D data flow result=40 14:34:01 Set A/D channel type result=40 14:34:01 Set A/D encoding result=40 14:34:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:01 Set channel filter=0.000000e+000 result=40 14:34:01 Config A/D Result=40 14:34:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:01 Get A/D filter: -9.255963e+061 result=40 14:34:01 Get A/D value=-858993460 result=40 14:34:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:01 Parameters OK 14:34:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:01 Set A/D data flow result=40 14:34:01 Set A/D channel type result=40 14:34:01 Set A/D encoding result=40 14:34:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:01 Set channel filter=0.000000e+000 result=40 14:34:01 Config A/D Result=40 14:34:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:01 Get A/D filter: -9.255963e+061 result=40 14:34:01 Get A/D value=-858993460 result=40 14:34:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:01 Aux= [UTC 2019-3-3 14:34:01] 14:34:01 Message to Camera, serial 91000 queued 14:34:37 Received message from Master: op=PointingHead serial=91012 14:34:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:34:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:34:37 Point started: ret=0 14:34:37 point_skyscan result=0 14:34:38 Check angles 14:34:38 SkyScan query 14:34:39 SkyScan query done: ret=0 az=152.595<-10173 ze=6.51<-11566 Statuses=0009 0008 14:34:39 Msec=0 True Az=152.595 Ze=6.51 Az status=0009 Ze status=0008 14:34:39 Check angles 14:34:39 SkyScan query 14:34:39 SkyScan query done: ret=0 az=134.82<-8988 ze=6.495<-11567 Statuses=0009 0008 14:34:39 Msec=750 True Az=134.82 Ze=6.495 Az status=0009 Ze status=0008 14:34:40 Check angles 14:34:40 SkyScan query 14:34:40 SkyScan query done: ret=0 az=117.39<-7826 ze=6.495<-11567 Statuses=0009 0008 14:34:40 Msec=1500 True Az=117.39 Ze=6.495 Az status=0009 Ze status=0008 14:34:40 Check angles 14:34:40 SkyScan query 14:34:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:34:41 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:34:41 Message to Master queued w/err=0: serial=91012 error=0 14:34:46 Received message from Master: op=Filter serial=91013 14:34:46 Color wheel filter change from 0 to 0 14:34:46 FLIGetFilterPos err=0 currentPosition=0 14:34:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:46 Filter is already there-color wheel unchanged 14:34:46 Received message from Master: op=Shutter serial=91014 14:34:46 Shutter LASER close 14:34:46 Received message from Camera: op=State serial=91016 14:34:46 GetSingleValue result=40 Value=cccccccc 14:34:46 SkyScan query 14:34:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:34:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:47 Parameters OK 14:34:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:47 Set A/D data flow result=40 14:34:47 Set A/D channel type result=40 14:34:47 Set A/D encoding result=40 14:34:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:47 Set channel filter=0.000000e+000 result=40 14:34:47 Config A/D Result=40 14:34:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:47 Get A/D filter: -9.255963e+061 result=40 14:34:47 Get A/D value=-858993460 result=40 14:34:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:47 Parameters OK 14:34:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:47 Set A/D data flow result=40 14:34:47 Set A/D channel type result=40 14:34:47 Set A/D encoding result=40 14:34:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:47 Set channel filter=0.000000e+000 result=40 14:34:47 Config A/D Result=40 14:34:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:47 Get A/D filter: -9.255963e+061 result=40 14:34:47 Get A/D value=-858993460 result=40 14:34:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:47 Aux= 14:34:47 Message to Camera, serial 91016 queued 14:35:24 Received message from Master: op=PointingHead serial=91029 14:35:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:35:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:35:24 Point started: ret=0 14:35:24 point_skyscan result=0 14:35:25 Check angles 14:35:25 SkyScan query 14:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.835<-13589 Statuses=0008 0009 14:35:25 Msec=0 True Az=112.995 Ze=-23.835 Az status=0008 Ze status=0009 14:35:25 Check angles 14:35:25 SkyScan query 14:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.21<-15014 Statuses=0008 0009 14:35:26 Msec=750 True Az=112.995 Ze=-45.21 Az status=0008 Ze status=0009 14:35:26 Check angles 14:35:26 SkyScan query 14:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.165<-16411 Statuses=0008 0009 14:35:27 Msec=1500 True Az=112.995 Ze=-66.165 Az status=0008 Ze status=0009 14:35:27 Check angles 14:35:27 SkyScan query 14:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.105<-17807 Statuses=0008 0009 14:35:27 Msec=2250 True Az=112.995 Ze=-87.105 Az status=0008 Ze status=0009 14:35:28 Check angles 14:35:28 SkyScan query 14:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.48<-19232 Statuses=0008 0009 14:35:28 Msec=3000 True Az=112.995 Ze=-108.48 Az status=0008 Ze status=0009 14:35:28 Check angles 14:35:28 SkyScan query 14:35:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.45<-20630 Statuses=0008 0009 14:35:29 Msec=3750 True Az=112.995 Ze=-129.45 Az status=0008 Ze status=0009 14:35:29 Check angles 14:35:29 SkyScan query 14:35:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.405<-22027 Statuses=0008 0009 14:35:30 Msec=4500 True Az=112.995 Ze=-150.405 Az status=0008 Ze status=0009 14:35:30 Check angles 14:35:30 SkyScan query 14:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0008 0009 14:35:31 Msec=5250 True Az=112.995 Ze=-171.495 Az status=0008 Ze status=0009 14:35:31 Check angles 14:35:31 SkyScan query 14:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:35:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:35:31 Message to Master queued w/err=0: serial=91029 error=0 14:35:36 Received message from Master: op=Filter serial=91030 14:35:36 Color wheel filter change from 0 to 0 14:35:36 FLIGetFilterPos err=0 currentPosition=0 14:35:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:36 Filter is already there-color wheel unchanged 14:35:36 Received message from Master: op=Shutter serial=91031 14:35:36 Shutter LASER open 14:35:37 Received message from Camera: op=State serial=91033 14:35:37 GetSingleValue result=40 Value=cccccccc 14:35:37 SkyScan query 14:35:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:35:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:37 Parameters OK 14:35:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:37 Set A/D data flow result=40 14:35:37 Set A/D channel type result=40 14:35:37 Set A/D encoding result=40 14:35:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:37 Set channel filter=0.000000e+000 result=40 14:35:37 Config A/D Result=40 14:35:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:37 Get A/D filter: -9.255963e+061 result=40 14:35:37 Get A/D value=-858993460 result=40 14:35:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:37 Parameters OK 14:35:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:37 Set A/D data flow result=40 14:35:37 Set A/D channel type result=40 14:35:37 Set A/D encoding result=40 14:35:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:37 Set channel filter=0.000000e+000 result=40 14:35:37 Config A/D Result=40 14:35:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:37 Get A/D filter: -9.255963e+061 result=40 14:35:37 Get A/D value=-858993460 result=40 14:35:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:37 Aux= 14:35:37 Message to Camera, serial 91033 queued 14:35:46 Received message from Master: op=Shutter serial=91043 14:35:46 Shutter LASER close 14:35:46 Received message from Master: op=PointingHead serial=91047 14:35:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:35:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:35:46 Point started: ret=0 14:35:46 point_skyscan result=0 14:35:47 Check angles 14:35:47 SkyScan query 14:35:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 14:35:48 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 14:35:48 Check angles 14:35:48 SkyScan query 14:35:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 14:35:49 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 14:35:49 Check angles 14:35:49 SkyScan query 14:35:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 14:35:49 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 14:35:49 Check angles 14:35:49 SkyScan query 14:35:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 14:35:50 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 14:35:50 Check angles 14:35:50 SkyScan query 14:35:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 14:35:51 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 14:35:51 Check angles 14:35:51 SkyScan query 14:35:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 14:35:52 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 14:35:52 Check angles 14:35:52 SkyScan query 14:35:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 14:35:52 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 14:35:52 Check angles 14:35:52 SkyScan query 14:35:53 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 14:35:53 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 14:35:53 Check angles 14:35:53 SkyScan query 14:35:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:35:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:35:54 Message to Master queued w/err=0: serial=91047 error=0 14:35:59 Received message from Master: op=Filter serial=91048 14:35:59 Color wheel filter change from 0 to 0 14:35:59 FLIGetFilterPos err=0 currentPosition=0 14:35:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:59 Filter is already there-color wheel unchanged 14:35:59 Received message from Master: op=Shutter serial=91049 14:35:59 Shutter LASER close 14:35:59 Received message from Camera: op=State serial=91051 14:35:59 GetSingleValue result=40 Value=cccccccc 14:35:59 SkyScan query 14:36:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:36:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:00 Parameters OK 14:36:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:00 Set A/D data flow result=40 14:36:00 Set A/D channel type result=40 14:36:00 Set A/D encoding result=40 14:36:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:00 Set channel filter=0.000000e+000 result=40 14:36:00 Config A/D Result=40 14:36:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:00 Get A/D filter: -9.255963e+061 result=40 14:36:00 Get A/D value=-858993460 result=40 14:36:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:00 Parameters OK 14:36:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:00 Set A/D data flow result=40 14:36:00 Set A/D channel type result=40 14:36:00 Set A/D encoding result=40 14:36:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:00 Set channel filter=0.000000e+000 result=40 14:36:00 Config A/D Result=40 14:36:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:00 Get A/D filter: -9.255963e+061 result=40 14:36:00 Get A/D value=-858993460 result=40 14:36:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:00 Aux= 14:36:00 Message to Camera, serial 91051 queued 14:36:37 Received message from Master: op=PointingHead serial=91064 14:36:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:36:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:36:37 Point started: ret=0 14:36:37 point_skyscan result=0 14:36:38 Check angles 14:36:38 SkyScan query 14:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:36:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:36:38 Message to Master queued w/err=0: serial=91064 error=0 14:36:43 Received message from Master: op=Filter serial=91065 14:36:43 Color wheel filter change from 0 to 0 14:36:43 FLIGetFilterPos err=0 currentPosition=0 14:36:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:43 Filter is already there-color wheel unchanged 14:36:43 Received message from Master: op=Shutter serial=91066 14:36:43 Shutter LASER close 14:36:43 Received message from Camera: op=State serial=91068 14:36:43 GetSingleValue result=40 Value=cccccccc 14:36:43 SkyScan query 14:36:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:36:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:44 Parameters OK 14:36:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:44 Set A/D data flow result=40 14:36:44 Set A/D channel type result=40 14:36:44 Set A/D encoding result=40 14:36:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:44 Set channel filter=0.000000e+000 result=40 14:36:44 Config A/D Result=40 14:36:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:44 Get A/D filter: -9.255963e+061 result=40 14:36:44 Get A/D value=-858993460 result=40 14:36:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:44 Parameters OK 14:36:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:44 Set A/D data flow result=40 14:36:44 Set A/D channel type result=40 14:36:44 Set A/D encoding result=40 14:36:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:44 Set channel filter=0.000000e+000 result=40 14:36:44 Config A/D Result=40 14:36:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:44 Get A/D filter: -9.255963e+061 result=40 14:36:44 Get A/D value=-858993460 result=40 14:36:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:44 Aux= 14:36:44 Message to Camera, serial 91068 queued 14:37:21 Received message from Master: op=PointingHead serial=91081 14:37:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:37:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:37:21 Point started: ret=0 14:37:21 point_skyscan result=0 14:37:22 Check angles 14:37:22 SkyScan query 14:37:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:37:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:37:23 Message to Master queued w/err=0: serial=91081 error=0 14:37:28 Received message from Master: op=Filter serial=91082 14:37:28 Color wheel filter change from 0 to 0 14:37:28 FLIGetFilterPos err=0 currentPosition=0 14:37:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:28 Filter is already there-color wheel unchanged 14:37:28 Received message from Master: op=Shutter serial=91083 14:37:28 Shutter LASER close 14:37:28 Received message from Camera: op=State serial=91085 14:37:28 GetSingleValue result=40 Value=cccccccc 14:37:28 SkyScan query 14:37:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:37:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:28 Parameters OK 14:37:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:28 Set A/D data flow result=40 14:37:28 Set A/D channel type result=40 14:37:28 Set A/D encoding result=40 14:37:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:28 Set channel filter=0.000000e+000 result=40 14:37:28 Config A/D Result=40 14:37:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:28 Get A/D filter: -9.255963e+061 result=40 14:37:28 Get A/D value=-858993460 result=40 14:37:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:28 Parameters OK 14:37:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:28 Set A/D data flow result=40 14:37:28 Set A/D channel type result=40 14:37:28 Set A/D encoding result=40 14:37:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:28 Set channel filter=0.000000e+000 result=40 14:37:28 Config A/D Result=40 14:37:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:28 Get A/D filter: -9.255963e+061 result=40 14:37:28 Get A/D value=-858993460 result=40 14:37:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:28 Aux= 14:37:28 Message to Camera, serial 91085 queued 14:38:05 Received message from Master: op=PointingHead serial=91098 14:38:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:38:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:38:06 Point started: ret=0 14:38:06 point_skyscan result=0 14:38:06 Check angles 14:38:06 SkyScan query 14:38:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:38:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:38:07 Message to Master queued w/err=0: serial=91098 error=0 14:38:12 Received message from Master: op=Filter serial=91099 14:38:12 Color wheel filter change from 0 to 0 14:38:12 FLIGetFilterPos err=0 currentPosition=0 14:38:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:12 Filter is already there-color wheel unchanged 14:38:12 Received message from Master: op=Shutter serial=91100 14:38:12 Shutter LASER close 14:38:12 Received message from Camera: op=State serial=91102 14:38:12 GetSingleValue result=40 Value=cccccccc 14:38:12 SkyScan query 14:38:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:38:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:13 Parameters OK 14:38:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:13 Set A/D data flow result=40 14:38:13 Set A/D channel type result=40 14:38:13 Set A/D encoding result=40 14:38:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:13 Set channel filter=0.000000e+000 result=40 14:38:13 Config A/D Result=40 14:38:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:13 Get A/D filter: -9.255963e+061 result=40 14:38:13 Get A/D value=-858993460 result=40 14:38:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:13 Parameters OK 14:38:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:13 Set A/D data flow result=40 14:38:13 Set A/D channel type result=40 14:38:13 Set A/D encoding result=40 14:38:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:13 Set channel filter=0.000000e+000 result=40 14:38:13 Config A/D Result=40 14:38:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:13 Get A/D filter: -9.255963e+061 result=40 14:38:13 Get A/D value=-858993460 result=40 14:38:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:13 Aux= 14:38:13 Message to Camera, serial 91102 queued 14:38:49 Received message from Master: op=PointingHead serial=91115 14:38:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:38:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:38:50 Point started: ret=0 14:38:50 point_skyscan result=0 14:38:51 Check angles 14:38:51 SkyScan query 14:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 14:38:51 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 14:38:51 Check angles 14:38:51 SkyScan query 14:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 14:38:52 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 14:38:52 Check angles 14:38:52 SkyScan query 14:38:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 14:38:53 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 14:38:53 Check angles 14:38:53 SkyScan query 14:38:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 14:38:53 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 14:38:54 Check angles 14:38:54 SkyScan query 14:38:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.58<-19172 Statuses=0008 0009 14:38:54 Msec=3000 True Az=112.995 Ze=-107.58 Az status=0008 Ze status=0009 14:38:54 Check angles 14:38:54 SkyScan query 14:38:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.52<-20568 Statuses=0008 0009 14:38:55 Msec=3750 True Az=112.995 Ze=-128.52 Az status=0008 Ze status=0009 14:38:55 Check angles 14:38:55 SkyScan query 14:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.49<-21966 Statuses=0008 0009 14:38:56 Msec=4500 True Az=112.995 Ze=-149.49 Az status=0008 Ze status=0009 14:38:56 Check angles 14:38:56 SkyScan query 14:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.43<-23362 Statuses=0008 0009 14:38:56 Msec=5250 True Az=112.995 Ze=-170.43 Az status=0008 Ze status=0009 14:38:57 Check angles 14:38:57 SkyScan query 14:38:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:38:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:38:57 Message to Master queued w/err=0: serial=91115 error=0 14:39:02 Received message from Master: op=Filter serial=91116 14:39:02 Color wheel filter change from 0 to 0 14:39:02 FLIGetFilterPos err=0 currentPosition=0 14:39:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:02 Filter is already there-color wheel unchanged 14:39:02 Received message from Master: op=Shutter serial=91117 14:39:02 Shutter LASER open 14:39:03 Received message from Camera: op=State serial=91119 14:39:03 GetSingleValue result=40 Value=cccccccc 14:39:03 SkyScan query 14:39:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:39:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:03 Parameters OK 14:39:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:03 Set A/D data flow result=40 14:39:03 Set A/D channel type result=40 14:39:03 Set A/D encoding result=40 14:39:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:03 Set channel filter=0.000000e+000 result=40 14:39:03 Config A/D Result=40 14:39:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:03 Get A/D filter: -9.255963e+061 result=40 14:39:03 Get A/D value=-858993460 result=40 14:39:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:03 Parameters OK 14:39:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:03 Set A/D data flow result=40 14:39:03 Set A/D channel type result=40 14:39:03 Set A/D encoding result=40 14:39:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:03 Set channel filter=0.000000e+000 result=40 14:39:03 Config A/D Result=40 14:39:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:03 Get A/D filter: -9.255963e+061 result=40 14:39:03 Get A/D value=-858993460 result=40 14:39:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:03 Aux= 14:39:03 Message to Camera, serial 91119 queued 14:39:12 Received message from Master: op=Shutter serial=91129 14:39:12 Shutter LASER close 14:39:12 Received message from Master: op=PointingHead serial=91133 14:39:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:39:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:39:13 Point started: ret=0 14:39:13 point_skyscan result=0 14:39:13 Check angles 14:39:13 SkyScan query 14:39:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 14:39:14 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 14:39:14 Check angles 14:39:14 SkyScan query 14:39:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 14:39:15 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 14:39:15 Check angles 14:39:15 SkyScan query 14:39:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.74<-18716 Statuses=0008 0009 14:39:15 Msec=1500 True Az=112.995 Ze=-100.74 Az status=0008 Ze status=0009 14:39:16 Check angles 14:39:16 SkyScan query 14:39:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.335<-17289 Statuses=0008 0009 14:39:16 Msec=2250 True Az=112.995 Ze=-79.335 Az status=0008 Ze status=0009 14:39:16 Check angles 14:39:16 SkyScan query 14:39:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.93<-15862 Statuses=0008 0009 14:39:17 Msec=3000 True Az=112.995 Ze=-57.93 Az status=0008 Ze status=0009 14:39:17 Check angles 14:39:17 SkyScan query 14:39:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.005<-14467 Statuses=0008 0009 14:39:18 Msec=3750 True Az=112.995 Ze=-37.005 Az status=0008 Ze status=0009 14:39:18 Check angles 14:39:18 SkyScan query 14:39:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.035<-13069 Statuses=0008 0009 14:39:18 Msec=4500 True Az=112.995 Ze=-16.035 Az status=0008 Ze status=0009 14:39:19 Check angles 14:39:19 SkyScan query 14:39:19 SkyScan query done: ret=0 az=112.995<-7533 ze=4.74<-11684 Statuses=0008 0009 14:39:19 Msec=5250 True Az=112.995 Ze=4.74 Az status=0008 Ze status=0009 14:39:19 Check angles 14:39:19 SkyScan query 14:39:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:39:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:39:20 Message to Master queued w/err=0: serial=91133 error=0 14:39:25 Received message from Master: op=Filter serial=91134 14:39:25 Color wheel filter change from 0 to 0 14:39:25 FLIGetFilterPos err=0 currentPosition=0 14:39:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:25 Filter is already there-color wheel unchanged 14:39:25 Received message from Master: op=Shutter serial=91135 14:39:25 Shutter LASER close 14:39:25 Received message from Camera: op=State serial=91137 14:39:25 GetSingleValue result=40 Value=cccccccc 14:39:25 SkyScan query 14:39:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:39:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:26 Parameters OK 14:39:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:26 Set A/D data flow result=40 14:39:26 Set A/D channel type result=40 14:39:26 Set A/D encoding result=40 14:39:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:26 Set channel filter=0.000000e+000 result=40 14:39:26 Config A/D Result=40 14:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:26 Get A/D filter: -9.255963e+061 result=40 14:39:26 Get A/D value=-858993460 result=40 14:39:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:26 Parameters OK 14:39:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:26 Set A/D data flow result=40 14:39:26 Set A/D channel type result=40 14:39:26 Set A/D encoding result=40 14:39:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:26 Set channel filter=0.000000e+000 result=40 14:39:26 Config A/D Result=40 14:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:26 Get A/D filter: -9.255963e+061 result=40 14:39:26 Get A/D value=-858993460 result=40 14:39:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:26 Aux= 14:39:26 Message to Camera, serial 91137 queued 14:40:03 Received message from Master: op=PointingHead serial=91150 14:40:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:40:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:40:03 Point started: ret=0 14:40:03 point_skyscan result=0 14:40:04 Check angles 14:40:04 SkyScan query 14:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:40:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:40:04 Message to Master queued w/err=0: serial=91150 error=0 14:40:09 Received message from Master: op=Filter serial=91151 14:40:09 Color wheel filter change from 0 to 0 14:40:09 FLIGetFilterPos err=0 currentPosition=0 14:40:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:09 Filter is already there-color wheel unchanged 14:40:10 Received message from Master: op=Shutter serial=91152 14:40:10 Shutter LASER close 14:40:10 Received message from Camera: op=State serial=91154 14:40:10 GetSingleValue result=40 Value=cccccccc 14:40:10 SkyScan query 14:40:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:40:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:10 Parameters OK 14:40:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:10 Set A/D data flow result=40 14:40:10 Set A/D channel type result=40 14:40:10 Set A/D encoding result=40 14:40:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:10 Set channel filter=0.000000e+000 result=40 14:40:10 Config A/D Result=40 14:40:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:10 Get A/D filter: -9.255963e+061 result=40 14:40:10 Get A/D value=-858993460 result=40 14:40:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:10 Parameters OK 14:40:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:10 Set A/D data flow result=40 14:40:10 Set A/D channel type result=40 14:40:10 Set A/D encoding result=40 14:40:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:10 Set channel filter=0.000000e+000 result=40 14:40:10 Config A/D Result=40 14:40:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:10 Get A/D filter: -9.255963e+061 result=40 14:40:10 Get A/D value=-858993460 result=40 14:40:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:10 Aux= 14:40:10 Message to Camera, serial 91154 queued 14:40:47 Received message from Master: op=PointingHead serial=91167 14:40:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:40:47 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:40:47 Point started: ret=0 14:40:47 point_skyscan result=0 14:40:48 Check angles 14:40:48 SkyScan query 14:40:49 SkyScan query done: ret=0 az=135.93<-9062 ze=-6.51<-12434 Statuses=0009 0008 14:40:49 Msec=0 True Az=135.93 Ze=-6.51 Az status=0009 Ze status=0008 14:40:49 Check angles 14:40:49 SkyScan query 14:40:49 SkyScan query done: ret=0 az=153.33<-10222 ze=-6.495<-12433 Statuses=0009 0008 14:40:49 Msec=750 True Az=153.33 Ze=-6.495 Az status=0009 Ze status=0008 14:40:50 Check angles 14:40:50 SkyScan query 14:40:50 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 14:40:50 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 14:40:50 Check angles 14:40:50 SkyScan query 14:40:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:40:51 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:40:51 Message to Master queued w/err=0: serial=91167 error=0 14:40:56 Received message from Master: op=Filter serial=91168 14:40:56 Color wheel filter change from 0 to 0 14:40:56 FLIGetFilterPos err=0 currentPosition=0 14:40:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:56 Filter is already there-color wheel unchanged 14:40:56 Received message from Master: op=Shutter serial=91169 14:40:56 Shutter LASER close 14:40:56 Received message from Camera: op=State serial=91171 14:40:56 GetSingleValue result=40 Value=cccccccc 14:40:56 SkyScan query 14:40:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:40:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:57 Parameters OK 14:40:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:57 Set A/D data flow result=40 14:40:57 Set A/D channel type result=40 14:40:57 Set A/D encoding result=40 14:40:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:57 Set channel filter=0.000000e+000 result=40 14:40:57 Config A/D Result=40 14:40:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:57 Get A/D filter: -9.255963e+061 result=40 14:40:57 Get A/D value=-858993460 result=40 14:40:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:57 Parameters OK 14:40:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:57 Set A/D data flow result=40 14:40:57 Set A/D channel type result=40 14:40:57 Set A/D encoding result=40 14:40:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:57 Set channel filter=0.000000e+000 result=40 14:40:57 Config A/D Result=40 14:40:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:57 Get A/D filter: -9.255963e+061 result=40 14:40:57 Get A/D value=-858993460 result=40 14:40:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:57 Aux= 14:40:57 Message to Camera, serial 91171 queued 14:41:33 Received message from Master: op=PointingHead serial=91184 14:41:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:41:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:41:34 Point started: ret=0 14:41:34 point_skyscan result=0 14:41:35 Check angles 14:41:35 SkyScan query 14:41:35 SkyScan query done: ret=0 az=152.85<-10190 ze=6.51<-11566 Statuses=0009 0008 14:41:35 Msec=0 True Az=152.85 Ze=6.51 Az status=0009 Ze status=0008 14:41:35 Check angles 14:41:35 SkyScan query 14:41:36 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 14:41:36 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 14:41:36 Check angles 14:41:36 SkyScan query 14:41:37 SkyScan query done: ret=0 az=117.21<-7814 ze=6.495<-11567 Statuses=0009 0008 14:41:37 Msec=1500 True Az=117.21 Ze=6.495 Az status=0009 Ze status=0008 14:41:37 Check angles 14:41:37 SkyScan query 14:41:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:41:37 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:41:37 Message to Master queued w/err=0: serial=91184 error=0 14:41:42 Received message from Master: op=Filter serial=91185 14:41:42 Color wheel filter change from 0 to 0 14:41:42 FLIGetFilterPos err=0 currentPosition=0 14:41:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:42 Filter is already there-color wheel unchanged 14:41:43 Received message from Master: op=Shutter serial=91186 14:41:43 Shutter LASER close 14:41:43 Received message from Camera: op=State serial=91188 14:41:43 GetSingleValue result=40 Value=cccccccc 14:41:43 SkyScan query 14:41:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:41:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:43 Parameters OK 14:41:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:43 Set A/D data flow result=40 14:41:43 Set A/D channel type result=40 14:41:43 Set A/D encoding result=40 14:41:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:43 Set channel filter=0.000000e+000 result=40 14:41:43 Config A/D Result=40 14:41:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:43 Get A/D filter: -9.255963e+061 result=40 14:41:43 Get A/D value=-858993460 result=40 14:41:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:43 Parameters OK 14:41:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:43 Set A/D data flow result=40 14:41:43 Set A/D channel type result=40 14:41:43 Set A/D encoding result=40 14:41:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:43 Set channel filter=0.000000e+000 result=40 14:41:43 Config A/D Result=40 14:41:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:43 Get A/D filter: -9.255963e+061 result=40 14:41:43 Get A/D value=-858993460 result=40 14:41:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:43 Aux= 14:41:43 Message to Camera, serial 91188 queued 14:42:20 Received message from Master: op=PointingHead serial=91201 14:42:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:42:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:42:20 Point started: ret=0 14:42:20 point_skyscan result=0 14:42:21 Check angles 14:42:21 SkyScan query 14:42:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 14:42:22 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 14:42:22 Check angles 14:42:22 SkyScan query 14:42:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 14:42:22 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 14:42:23 Check angles 14:42:23 SkyScan query 14:42:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 14:42:23 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 14:42:23 Check angles 14:42:23 SkyScan query 14:42:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 14:42:24 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 14:42:24 Check angles 14:42:24 SkyScan query 14:42:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 14:42:25 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 14:42:25 Check angles 14:42:25 SkyScan query 14:42:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 14:42:25 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 14:42:26 Check angles 14:42:26 SkyScan query 14:42:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.31<-21954 Statuses=0008 0009 14:42:26 Msec=4500 True Az=112.995 Ze=-149.31 Az status=0008 Ze status=0009 14:42:26 Check angles 14:42:26 SkyScan query 14:42:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 14:42:27 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 14:42:27 Check angles 14:42:27 SkyScan query 14:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:42:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:42:28 Message to Master queued w/err=0: serial=91201 error=0 14:42:33 Received message from Master: op=Filter serial=91202 14:42:33 Color wheel filter change from 0 to 0 14:42:33 FLIGetFilterPos err=0 currentPosition=0 14:42:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:33 Filter is already there-color wheel unchanged 14:42:33 Received message from Master: op=Shutter serial=91203 14:42:33 Shutter LASER open 14:42:33 Received message from Camera: op=State serial=91205 14:42:33 GetSingleValue result=40 Value=cccccccc 14:42:33 SkyScan query 14:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:42:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:34 Parameters OK 14:42:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:34 Set A/D data flow result=40 14:42:34 Set A/D channel type result=40 14:42:34 Set A/D encoding result=40 14:42:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:34 Set channel filter=0.000000e+000 result=40 14:42:34 Config A/D Result=40 14:42:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:34 Get A/D filter: -9.255963e+061 result=40 14:42:34 Get A/D value=-858993460 result=40 14:42:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:34 Parameters OK 14:42:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:34 Set A/D data flow result=40 14:42:34 Set A/D channel type result=40 14:42:34 Set A/D encoding result=40 14:42:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:34 Set channel filter=0.000000e+000 result=40 14:42:34 Config A/D Result=40 14:42:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:34 Get A/D filter: -9.255963e+061 result=40 14:42:34 Get A/D value=-858993460 result=40 14:42:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:34 Aux= 14:42:34 Message to Camera, serial 91205 queued 14:42:42 Received message from Master: op=Shutter serial=91215 14:42:42 Shutter LASER close 14:42:43 Received message from Master: op=PointingHead serial=91219 14:42:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:42:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:42:43 Point started: ret=0 14:42:43 point_skyscan result=0 14:42:44 Check angles 14:42:44 SkyScan query 14:42:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 14:42:44 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 14:42:44 Check angles 14:42:44 SkyScan query 14:42:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 14:42:45 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 14:42:45 Check angles 14:42:45 SkyScan query 14:42:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.515<-18701 Statuses=0008 0009 14:42:46 Msec=1500 True Az=112.995 Ze=-100.515 Az status=0008 Ze status=0009 14:42:46 Check angles 14:42:46 SkyScan query 14:42:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.095<-17273 Statuses=0008 0009 14:42:47 Msec=2250 True Az=112.995 Ze=-79.095 Az status=0008 Ze status=0009 14:42:47 Check angles 14:42:47 SkyScan query 14:42:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.69<-15846 Statuses=0008 0009 14:42:47 Msec=3000 True Az=112.995 Ze=-57.69 Az status=0008 Ze status=0009 14:42:47 Check angles 14:42:47 SkyScan query 14:42:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.765<-14451 Statuses=0008 0009 14:42:48 Msec=3750 True Az=112.995 Ze=-36.765 Az status=0008 Ze status=0009 14:42:48 Check angles 14:42:48 SkyScan query 14:42:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.345<-13023 Statuses=0008 0009 14:42:49 Msec=4500 True Az=112.995 Ze=-15.345 Az status=0008 Ze status=0009 14:42:49 Check angles 14:42:49 SkyScan query 14:42:50 SkyScan query done: ret=0 az=112.995<-7533 ze=5.205<-11653 Statuses=0008 0009 14:42:50 Msec=5250 True Az=112.995 Ze=5.205 Az status=0008 Ze status=0009 14:42:50 Check angles 14:42:50 SkyScan query 14:42:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:42:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:42:50 Message to Master queued w/err=0: serial=91219 error=0 14:42:55 Received message from Master: op=Filter serial=91220 14:42:55 Color wheel filter change from 0 to 0 14:42:55 FLIGetFilterPos err=0 currentPosition=0 14:42:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:55 Filter is already there-color wheel unchanged 14:42:55 Received message from Master: op=Shutter serial=91221 14:42:55 Shutter LASER close 14:42:56 Received message from Camera: op=State serial=91223 14:42:56 GetSingleValue result=40 Value=cccccccc 14:42:56 SkyScan query 14:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:42:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:56 Parameters OK 14:42:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:56 Set A/D data flow result=40 14:42:56 Set A/D channel type result=40 14:42:56 Set A/D encoding result=40 14:42:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:56 Set channel filter=0.000000e+000 result=40 14:42:56 Config A/D Result=40 14:42:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:56 Get A/D filter: -9.255963e+061 result=40 14:42:56 Get A/D value=-858993460 result=40 14:42:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:56 Parameters OK 14:42:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:56 Set A/D data flow result=40 14:42:56 Set A/D channel type result=40 14:42:56 Set A/D encoding result=40 14:42:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:56 Set channel filter=0.000000e+000 result=40 14:42:56 Config A/D Result=40 14:42:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:56 Get A/D filter: -9.255963e+061 result=40 14:42:56 Get A/D value=-858993460 result=40 14:42:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:56 Aux= 14:42:56 Message to Camera, serial 91223 queued 14:43:33 Received message from Master: op=PointingHead serial=91236 14:43:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:43:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:43:33 Point started: ret=0 14:43:33 point_skyscan result=0 14:43:34 Check angles 14:43:34 SkyScan query 14:43:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:43:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:43:35 Message to Master queued w/err=0: serial=91236 error=0 14:43:40 Received message from Master: op=Filter serial=91237 14:43:40 Color wheel filter change from 0 to 0 14:43:40 FLIGetFilterPos err=0 currentPosition=0 14:43:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:40 Filter is already there-color wheel unchanged 14:43:40 Received message from Master: op=Shutter serial=91238 14:43:40 Shutter LASER close 14:43:40 Received message from Camera: op=State serial=91240 14:43:40 GetSingleValue result=40 Value=cccccccc 14:43:40 SkyScan query 14:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:43:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:41 Parameters OK 14:43:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:41 Set A/D data flow result=40 14:43:41 Set A/D channel type result=40 14:43:41 Set A/D encoding result=40 14:43:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:41 Set channel filter=0.000000e+000 result=40 14:43:41 Config A/D Result=40 14:43:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:41 Get A/D filter: -9.255963e+061 result=40 14:43:41 Get A/D value=-858993460 result=40 14:43:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:41 Parameters OK 14:43:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:41 Set A/D data flow result=40 14:43:41 Set A/D channel type result=40 14:43:41 Set A/D encoding result=40 14:43:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:41 Set channel filter=0.000000e+000 result=40 14:43:41 Config A/D Result=40 14:43:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:41 Get A/D filter: -9.255963e+061 result=40 14:43:41 Get A/D value=-858993460 result=40 14:43:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:41 Aux= 14:43:41 Message to Camera, serial 91240 queued [UTC 2019-3-3 14:43:50] 14:44:17 Received message from Master: op=PointingHead serial=91253 14:44:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:44:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:44:18 Point started: ret=0 14:44:18 point_skyscan result=0 14:44:19 Check angles 14:44:19 SkyScan query 14:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:44:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:44:19 Message to Master queued w/err=0: serial=91253 error=0 14:44:24 Received message from Master: op=Filter serial=91254 14:44:24 Color wheel filter change from 0 to 0 14:44:24 FLIGetFilterPos err=0 currentPosition=0 14:44:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:24 Filter is already there-color wheel unchanged 14:44:24 Received message from Master: op=Shutter serial=91255 14:44:24 Shutter LASER close 14:44:24 Received message from Camera: op=State serial=91257 14:44:24 GetSingleValue result=40 Value=cccccccc 14:44:24 SkyScan query 14:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:44:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:25 Parameters OK 14:44:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:25 Set A/D data flow result=40 14:44:25 Set A/D channel type result=40 14:44:25 Set A/D encoding result=40 14:44:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:25 Set channel filter=0.000000e+000 result=40 14:44:25 Config A/D Result=40 14:44:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:25 Get A/D filter: -9.255963e+061 result=40 14:44:25 Get A/D value=-858993460 result=40 14:44:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:25 Parameters OK 14:44:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:25 Set A/D data flow result=40 14:44:25 Set A/D channel type result=40 14:44:25 Set A/D encoding result=40 14:44:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:25 Set channel filter=0.000000e+000 result=40 14:44:25 Config A/D Result=40 14:44:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:25 Get A/D filter: -9.255963e+061 result=40 14:44:25 Get A/D value=-858993460 result=40 14:44:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:25 Aux= 14:44:25 Message to Camera, serial 91257 queued 14:45:02 Received message from Master: op=PointingHead serial=91270 14:45:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:45:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:45:02 Point started: ret=0 14:45:02 point_skyscan result=0 14:45:03 Check angles 14:45:03 SkyScan query 14:45:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:45:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:45:03 Message to Master queued w/err=0: serial=91270 error=0 14:45:08 Received message from Master: op=Filter serial=91271 14:45:08 Color wheel filter change from 0 to 0 14:45:08 FLIGetFilterPos err=0 currentPosition=0 14:45:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:08 Filter is already there-color wheel unchanged 14:45:09 Received message from Master: op=Shutter serial=91272 14:45:09 Shutter LASER close 14:45:09 Received message from Camera: op=State serial=91274 14:45:09 GetSingleValue result=40 Value=cccccccc 14:45:09 SkyScan query 14:45:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:45:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:09 Parameters OK 14:45:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:09 Set A/D data flow result=40 14:45:09 Set A/D channel type result=40 14:45:09 Set A/D encoding result=40 14:45:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:09 Set channel filter=0.000000e+000 result=40 14:45:09 Config A/D Result=40 14:45:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:09 Get A/D filter: -9.255963e+061 result=40 14:45:09 Get A/D value=-858993460 result=40 14:45:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:09 Parameters OK 14:45:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:09 Set A/D data flow result=40 14:45:09 Set A/D channel type result=40 14:45:09 Set A/D encoding result=40 14:45:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:09 Set channel filter=0.000000e+000 result=40 14:45:09 Config A/D Result=40 14:45:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:09 Get A/D filter: -9.255963e+061 result=40 14:45:09 Get A/D value=-858993460 result=40 14:45:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:09 Aux= 14:45:09 Message to Camera, serial 91274 queued 14:45:46 Received message from Master: op=PointingHead serial=91287 14:45:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:45:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:45:46 Point started: ret=0 14:45:46 point_skyscan result=0 14:45:47 Check angles 14:45:47 SkyScan query 14:45:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 14:45:48 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 14:45:48 Check angles 14:45:48 SkyScan query 14:45:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 14:45:48 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 14:45:49 Check angles 14:45:49 SkyScan query 14:45:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 14:45:49 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 14:45:49 Check angles 14:45:49 SkyScan query 14:45:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 14:45:50 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 14:45:50 Check angles 14:45:50 SkyScan query 14:45:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.985<-19199 Statuses=0008 0009 14:45:51 Msec=3000 True Az=112.995 Ze=-107.985 Az status=0008 Ze status=0009 14:45:51 Check angles 14:45:51 SkyScan query 14:45:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 14:45:51 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 14:45:52 Check angles 14:45:52 SkyScan query 14:45:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.895<-21993 Statuses=0008 0009 14:45:52 Msec=4500 True Az=112.995 Ze=-149.895 Az status=0008 Ze status=0009 14:45:52 Check angles 14:45:52 SkyScan query 14:45:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 14:45:53 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 14:45:53 Check angles 14:45:53 SkyScan query 14:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:45:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:45:54 Message to Master queued w/err=0: serial=91287 error=0 14:45:59 Received message from Master: op=Filter serial=91288 14:45:59 Color wheel filter change from 0 to 0 14:45:59 FLIGetFilterPos err=0 currentPosition=0 14:45:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:59 Filter is already there-color wheel unchanged 14:45:59 Received message from Master: op=Shutter serial=91289 14:45:59 Shutter LASER open 14:45:59 Received message from Camera: op=State serial=91291 14:45:59 GetSingleValue result=40 Value=cccccccc 14:45:59 SkyScan query 14:46:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:46:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:00 Parameters OK 14:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:00 Set A/D data flow result=40 14:46:00 Set A/D channel type result=40 14:46:00 Set A/D encoding result=40 14:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:00 Set channel filter=0.000000e+000 result=40 14:46:00 Config A/D Result=40 14:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:00 Get A/D filter: -9.255963e+061 result=40 14:46:00 Get A/D value=-858993460 result=40 14:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:00 Parameters OK 14:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:00 Set A/D data flow result=40 14:46:00 Set A/D channel type result=40 14:46:00 Set A/D encoding result=40 14:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:00 Set channel filter=0.000000e+000 result=40 14:46:00 Config A/D Result=40 14:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:00 Get A/D filter: -9.255963e+061 result=40 14:46:00 Get A/D value=-858993460 result=40 14:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:00 Aux= 14:46:00 Message to Camera, serial 91291 queued 14:46:08 Received message from Master: op=Shutter serial=91301 14:46:08 Shutter LASER close 14:46:09 Received message from Master: op=PointingHead serial=91305 14:46:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:46:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:46:09 Point started: ret=0 14:46:09 point_skyscan result=0 14:46:10 Check angles 14:46:10 SkyScan query 14:46:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 14:46:10 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 14:46:11 Check angles 14:46:11 SkyScan query 14:46:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 14:46:11 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 14:46:11 Check angles 14:46:11 SkyScan query 14:46:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.605<-18707 Statuses=0008 0009 14:46:12 Msec=1500 True Az=112.995 Ze=-100.605 Az status=0008 Ze status=0009 14:46:12 Check angles 14:46:12 SkyScan query 14:46:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.665<-17311 Statuses=0008 0009 14:46:13 Msec=2250 True Az=112.995 Ze=-79.665 Az status=0008 Ze status=0009 14:46:13 Check angles 14:46:13 SkyScan query 14:46:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 14:46:13 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 14:46:14 Check angles 14:46:14 SkyScan query 14:46:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 14:46:14 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 14:46:14 Check angles 14:46:14 SkyScan query 14:46:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 14:46:15 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 14:46:15 Check angles 14:46:15 SkyScan query 14:46:16 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 14:46:16 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 14:46:16 Check angles 14:46:16 SkyScan query 14:46:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:46:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:46:16 Message to Master queued w/err=0: serial=91305 error=0 14:46:21 Received message from Master: op=Filter serial=91306 14:46:21 Color wheel filter change from 0 to 0 14:46:21 FLIGetFilterPos err=0 currentPosition=0 14:46:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:21 Filter is already there-color wheel unchanged 14:46:22 Received message from Master: op=Shutter serial=91307 14:46:22 Shutter LASER close 14:46:22 Received message from Camera: op=State serial=91309 14:46:22 GetSingleValue result=40 Value=cccccccc 14:46:22 SkyScan query 14:46:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:46:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:22 Parameters OK 14:46:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:22 Set A/D data flow result=40 14:46:22 Set A/D channel type result=40 14:46:22 Set A/D encoding result=40 14:46:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:22 Set channel filter=0.000000e+000 result=40 14:46:22 Config A/D Result=40 14:46:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:22 Get A/D filter: -9.255963e+061 result=40 14:46:22 Get A/D value=-858993460 result=40 14:46:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:22 Parameters OK 14:46:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:22 Set A/D data flow result=40 14:46:22 Set A/D channel type result=40 14:46:22 Set A/D encoding result=40 14:46:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:22 Set channel filter=0.000000e+000 result=40 14:46:22 Config A/D Result=40 14:46:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:22 Get A/D filter: -9.255963e+061 result=40 14:46:22 Get A/D value=-858993460 result=40 14:46:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:22 Aux= 14:46:22 Message to Camera, serial 91309 queued 14:46:59 Received message from Master: op=PointingHead serial=91322 14:46:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:46:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:46:59 Point started: ret=0 14:46:59 point_skyscan result=0 14:47:00 Check angles 14:47:00 SkyScan query 14:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:47:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:47:01 Message to Master queued w/err=0: serial=91322 error=0 14:47:06 Received message from Master: op=Filter serial=91323 14:47:06 Color wheel filter change from 0 to 0 14:47:06 FLIGetFilterPos err=0 currentPosition=0 14:47:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:06 Filter is already there-color wheel unchanged 14:47:06 Received message from Master: op=Shutter serial=91324 14:47:06 Shutter LASER close 14:47:06 Received message from Camera: op=State serial=91326 14:47:06 GetSingleValue result=40 Value=cccccccc 14:47:06 SkyScan query 14:47:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:47:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:07 Parameters OK 14:47:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:07 Set A/D data flow result=40 14:47:07 Set A/D channel type result=40 14:47:07 Set A/D encoding result=40 14:47:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:07 Set channel filter=0.000000e+000 result=40 14:47:07 Config A/D Result=40 14:47:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:07 Get A/D filter: -9.255963e+061 result=40 14:47:07 Get A/D value=-858993460 result=40 14:47:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:07 Parameters OK 14:47:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:07 Set A/D data flow result=40 14:47:07 Set A/D channel type result=40 14:47:07 Set A/D encoding result=40 14:47:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:07 Set channel filter=0.000000e+000 result=40 14:47:07 Config A/D Result=40 14:47:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:07 Get A/D filter: -9.255963e+061 result=40 14:47:07 Get A/D value=-858993460 result=40 14:47:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:07 Aux= 14:47:07 Message to Camera, serial 91326 queued 14:47:43 Received message from Master: op=PointingHead serial=91339 14:47:43 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:47:43 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:47:44 Point started: ret=0 14:47:44 point_skyscan result=0 14:47:45 Check angles 14:47:45 SkyScan query 14:47:45 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 14:47:45 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 14:47:45 Check angles 14:47:45 SkyScan query 14:47:46 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 14:47:46 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 14:47:46 Check angles 14:47:46 SkyScan query 14:47:47 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 14:47:47 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 14:47:47 Check angles 14:47:47 SkyScan query 14:47:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:47:47 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:47:47 Message to Master queued w/err=0: serial=91339 error=0 14:47:52 Received message from Master: op=Filter serial=91340 14:47:52 Color wheel filter change from 0 to 0 14:47:52 FLIGetFilterPos err=0 currentPosition=0 14:47:52 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:52 Filter is already there-color wheel unchanged 14:47:53 Received message from Master: op=Shutter serial=91341 14:47:53 Shutter LASER close 14:47:53 Received message from Camera: op=State serial=91343 14:47:53 GetSingleValue result=40 Value=cccccccc 14:47:53 SkyScan query 14:47:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:47:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:53 Parameters OK 14:47:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:53 Set A/D data flow result=40 14:47:53 Set A/D channel type result=40 14:47:53 Set A/D encoding result=40 14:47:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:53 Set channel filter=0.000000e+000 result=40 14:47:53 Config A/D Result=40 14:47:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:53 Get A/D filter: -9.255963e+061 result=40 14:47:53 Get A/D value=-858993460 result=40 14:47:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:53 Parameters OK 14:47:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:53 Set A/D data flow result=40 14:47:53 Set A/D channel type result=40 14:47:53 Set A/D encoding result=40 14:47:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:53 Set channel filter=0.000000e+000 result=40 14:47:53 Config A/D Result=40 14:47:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:53 Get A/D filter: -9.255963e+061 result=40 14:47:53 Get A/D value=-858993460 result=40 14:47:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:53 Aux= 14:47:53 Message to Camera, serial 91343 queued 14:48:29 Received message from Master: op=PointingHead serial=91355 14:48:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:48:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:48:29 Point started: ret=0 14:48:29 point_skyscan result=0 14:48:30 Check angles 14:48:30 SkyScan query 14:48:31 SkyScan query done: ret=0 az=153.225<-10215 ze=6.51<-11566 Statuses=0009 0008 14:48:31 Msec=0 True Az=153.225 Ze=6.51 Az status=0009 Ze status=0008 14:48:31 Check angles 14:48:31 SkyScan query 14:48:31 SkyScan query done: ret=0 az=135.72<-9048 ze=6.495<-11567 Statuses=0009 0008 14:48:31 Msec=750 True Az=135.72 Ze=6.495 Az status=0009 Ze status=0008 14:48:32 Check angles 14:48:32 SkyScan query 14:48:32 SkyScan query done: ret=0 az=118.245<-7883 ze=6.495<-11567 Statuses=0009 0008 14:48:32 Msec=1500 True Az=118.245 Ze=6.495 Az status=0009 Ze status=0008 14:48:32 Check angles 14:48:32 SkyScan query 14:48:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:48:33 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:48:33 Message to Master queued w/err=0: serial=91355 error=0 14:48:38 Received message from Master: op=Filter serial=91356 14:48:38 Color wheel filter change from 0 to 0 14:48:38 FLIGetFilterPos err=0 currentPosition=0 14:48:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:38 Filter is already there-color wheel unchanged 14:48:38 Received message from Master: op=Shutter serial=91357 14:48:38 Shutter LASER close 14:48:38 Received message from Camera: op=State serial=91359 14:48:38 GetSingleValue result=40 Value=cccccccc 14:48:38 SkyScan query 14:48:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:48:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:39 Parameters OK 14:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:39 Set A/D data flow result=40 14:48:39 Set A/D channel type result=40 14:48:39 Set A/D encoding result=40 14:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:39 Set channel filter=0.000000e+000 result=40 14:48:39 Config A/D Result=40 14:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:39 Get A/D filter: -9.255963e+061 result=40 14:48:39 Get A/D value=-858993460 result=40 14:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:39 Parameters OK 14:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:39 Set A/D data flow result=40 14:48:39 Set A/D channel type result=40 14:48:39 Set A/D encoding result=40 14:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:39 Set channel filter=0.000000e+000 result=40 14:48:39 Config A/D Result=40 14:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:39 Get A/D filter: -9.255963e+061 result=40 14:48:39 Get A/D value=-858993460 result=40 14:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:39 Aux= 14:48:39 Message to Camera, serial 91359 queued 14:49:16 Received message from Master: op=PointingHead serial=91372 14:49:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:49:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:49:16 Point started: ret=0 14:49:16 point_skyscan result=0 14:49:17 Check angles 14:49:17 SkyScan query 14:49:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 14:49:17 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 14:49:17 Check angles 14:49:17 SkyScan query 14:49:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 14:49:18 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 14:49:18 Check angles 14:49:18 SkyScan query 14:49:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.805<-16387 Statuses=0008 0009 14:49:19 Msec=1500 True Az=112.995 Ze=-65.805 Az status=0008 Ze status=0009 14:49:19 Check angles 14:49:19 SkyScan query 14:49:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 14:49:20 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 14:49:20 Check angles 14:49:20 SkyScan query 14:49:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.73<-19182 Statuses=0008 0009 14:49:20 Msec=3000 True Az=112.995 Ze=-107.73 Az status=0008 Ze status=0009 14:49:20 Check angles 14:49:20 SkyScan query 14:49:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.105<-20607 Statuses=0008 0009 14:49:21 Msec=3750 True Az=112.995 Ze=-129.105 Az status=0008 Ze status=0009 14:49:21 Check angles 14:49:21 SkyScan query 14:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.06<-22004 Statuses=0008 0009 14:49:22 Msec=4500 True Az=112.995 Ze=-150.06 Az status=0008 Ze status=0009 14:49:22 Check angles 14:49:22 SkyScan query 14:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 14:49:23 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 14:49:23 Check angles 14:49:23 SkyScan query 14:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:49:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:49:23 Message to Master queued w/err=0: serial=91372 error=0 14:49:28 Received message from Master: op=Filter serial=91373 14:49:28 Color wheel filter change from 0 to 0 14:49:28 FLIGetFilterPos err=0 currentPosition=0 14:49:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:49:28 Filter is already there-color wheel unchanged 14:49:28 Received message from Master: op=Shutter serial=91374 14:49:28 Shutter LASER open 14:49:29 Received message from Camera: op=State serial=91376 14:49:29 GetSingleValue result=40 Value=cccccccc 14:49:29 SkyScan query 14:49:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:49:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:29 Parameters OK 14:49:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:29 Set A/D data flow result=40 14:49:29 Set A/D channel type result=40 14:49:29 Set A/D encoding result=40 14:49:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:29 Set channel filter=0.000000e+000 result=40 14:49:29 Config A/D Result=40 14:49:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:29 Get A/D filter: -9.255963e+061 result=40 14:49:29 Get A/D value=-858993460 result=40 14:49:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:29 Parameters OK 14:49:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:29 Set A/D data flow result=40 14:49:29 Set A/D channel type result=40 14:49:29 Set A/D encoding result=40 14:49:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:29 Set channel filter=0.000000e+000 result=40 14:49:29 Config A/D Result=40 14:49:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:29 Get A/D filter: -9.255963e+061 result=40 14:49:29 Get A/D value=-858993460 result=40 14:49:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:49:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:49:29 Aux= 14:49:29 Message to Camera, serial 91376 queued 14:49:38 Received message from Master: op=Shutter serial=91386 14:49:38 Shutter LASER close 14:49:38 Received message from Master: op=PointingHead serial=91390 14:49:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:49:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:49:38 Point started: ret=0 14:49:38 point_skyscan result=0 14:49:39 Check angles 14:49:39 SkyScan query 14:49:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 14:49:40 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 14:49:40 Check angles 14:49:40 SkyScan query 14:49:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 14:49:41 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 14:49:41 Check angles 14:49:41 SkyScan query 14:49:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 14:49:41 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 14:49:41 Check angles 14:49:41 SkyScan query 14:49:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 14:49:42 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 14:49:42 Check angles 14:49:42 SkyScan query 14:49:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 14:49:43 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 14:49:43 Check angles 14:49:43 SkyScan query 14:49:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.235<-14549 Statuses=0008 0009 14:49:44 Msec=3750 True Az=112.995 Ze=-38.235 Az status=0008 Ze status=0009 14:49:44 Check angles 14:49:44 SkyScan query 14:49:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.295<-13153 Statuses=0008 0009 14:49:44 Msec=4500 True Az=112.995 Ze=-17.295 Az status=0008 Ze status=0009 14:49:44 Check angles 14:49:44 SkyScan query 14:49:45 SkyScan query done: ret=0 az=112.995<-7533 ze=4.08<-11728 Statuses=0008 0009 14:49:45 Msec=5250 True Az=112.995 Ze=4.08 Az status=0008 Ze status=0009 14:49:45 Check angles 14:49:45 SkyScan query 14:49:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:49:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:49:46 Message to Master queued w/err=0: serial=91390 error=0 14:49:51 Received message from Master: op=Filter serial=91391 14:49:51 Color wheel filter change from 0 to 0 14:49:51 FLIGetFilterPos err=0 currentPosition=0 14:49:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:49:51 Filter is already there-color wheel unchanged 14:49:51 Received message from Master: op=Shutter serial=91392 14:49:51 Shutter LASER close 14:49:51 Received message from Camera: op=State serial=91394 14:49:51 GetSingleValue result=40 Value=cccccccc 14:49:51 SkyScan query 14:49:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:49:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:52 Parameters OK 14:49:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:52 Set A/D data flow result=40 14:49:52 Set A/D channel type result=40 14:49:52 Set A/D encoding result=40 14:49:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:52 Set channel filter=0.000000e+000 result=40 14:49:52 Config A/D Result=40 14:49:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:52 Get A/D filter: -9.255963e+061 result=40 14:49:52 Get A/D value=-858993460 result=40 14:49:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:52 Parameters OK 14:49:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:52 Set A/D data flow result=40 14:49:52 Set A/D channel type result=40 14:49:52 Set A/D encoding result=40 14:49:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:52 Set channel filter=0.000000e+000 result=40 14:49:52 Config A/D Result=40 14:49:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:52 Get A/D filter: -9.255963e+061 result=40 14:49:52 Get A/D value=-858993460 result=40 14:49:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:49:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:49:52 Aux= 14:49:52 Message to Camera, serial 91394 queued 14:50:29 Received message from Master: op=PointingHead serial=91407 14:50:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:50:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:50:29 Point started: ret=0 14:50:29 point_skyscan result=0 14:50:30 Check angles 14:50:30 SkyScan query 14:50:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:50:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:50:30 Message to Master queued w/err=0: serial=91407 error=0 14:50:35 Received message from Master: op=Filter serial=91408 14:50:35 Color wheel filter change from 0 to 0 14:50:35 FLIGetFilterPos err=0 currentPosition=0 14:50:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:35 Filter is already there-color wheel unchanged 14:50:35 Received message from Master: op=Shutter serial=91409 14:50:35 Shutter LASER close 14:50:35 Received message from Camera: op=State serial=91411 14:50:35 GetSingleValue result=40 Value=cccccccc 14:50:35 SkyScan query 14:50:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:50:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:36 Parameters OK 14:50:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:36 Set A/D data flow result=40 14:50:36 Set A/D channel type result=40 14:50:36 Set A/D encoding result=40 14:50:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:36 Set channel filter=0.000000e+000 result=40 14:50:36 Config A/D Result=40 14:50:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:36 Get A/D filter: -9.255963e+061 result=40 14:50:36 Get A/D value=-858993460 result=40 14:50:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:36 Parameters OK 14:50:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:36 Set A/D data flow result=40 14:50:36 Set A/D channel type result=40 14:50:36 Set A/D encoding result=40 14:50:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:36 Set channel filter=0.000000e+000 result=40 14:50:36 Config A/D Result=40 14:50:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:36 Get A/D filter: -9.255963e+061 result=40 14:50:36 Get A/D value=-858993460 result=40 14:50:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:36 Aux= 14:50:36 Message to Camera, serial 91411 queued 14:51:13 Received message from Master: op=PointingHead serial=91424 14:51:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:51:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:51:13 Point started: ret=0 14:51:13 point_skyscan result=0 14:51:14 Check angles 14:51:14 SkyScan query 14:51:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:51:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:51:15 Message to Master queued w/err=0: serial=91424 error=0 14:51:20 Received message from Master: op=Filter serial=91425 14:51:20 Color wheel filter change from 0 to 0 14:51:20 FLIGetFilterPos err=0 currentPosition=0 14:51:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:20 Filter is already there-color wheel unchanged 14:51:20 Received message from Master: op=Shutter serial=91426 14:51:20 Shutter LASER close 14:51:20 Received message from Camera: op=State serial=91428 14:51:20 GetSingleValue result=40 Value=cccccccc 14:51:20 SkyScan query 14:51:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:51:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:20 Parameters OK 14:51:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:20 Set A/D data flow result=40 14:51:20 Set A/D channel type result=40 14:51:20 Set A/D encoding result=40 14:51:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:20 Set channel filter=0.000000e+000 result=40 14:51:20 Config A/D Result=40 14:51:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:20 Get A/D filter: -9.255963e+061 result=40 14:51:20 Get A/D value=-858993460 result=40 14:51:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:20 Parameters OK 14:51:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:20 Set A/D data flow result=40 14:51:20 Set A/D channel type result=40 14:51:20 Set A/D encoding result=40 14:51:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:20 Set channel filter=0.000000e+000 result=40 14:51:20 Config A/D Result=40 14:51:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:20 Get A/D filter: -9.255963e+061 result=40 14:51:20 Get A/D value=-858993460 result=40 14:51:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:51:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:51:20 Aux= 14:51:20 Message to Camera, serial 91428 queued 14:51:57 Received message from Master: op=PointingHead serial=91441 14:51:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:51:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:51:58 Point started: ret=0 14:51:58 point_skyscan result=0 14:51:58 Check angles 14:51:58 SkyScan query 14:51:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:51:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:51:59 Message to Master queued w/err=0: serial=91441 error=0 14:52:04 Received message from Master: op=Filter serial=91442 14:52:04 Color wheel filter change from 0 to 0 14:52:04 FLIGetFilterPos err=0 currentPosition=0 14:52:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:04 Filter is already there-color wheel unchanged 14:52:04 Received message from Master: op=Shutter serial=91443 14:52:04 Shutter LASER close 14:52:04 Received message from Camera: op=State serial=91445 14:52:04 GetSingleValue result=40 Value=cccccccc 14:52:04 SkyScan query 14:52:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:52:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:05 Parameters OK 14:52:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:05 Set A/D data flow result=40 14:52:05 Set A/D channel type result=40 14:52:05 Set A/D encoding result=40 14:52:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:05 Set channel filter=0.000000e+000 result=40 14:52:05 Config A/D Result=40 14:52:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:05 Get A/D filter: -9.255963e+061 result=40 14:52:05 Get A/D value=-858993460 result=40 14:52:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:05 Parameters OK 14:52:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:05 Set A/D data flow result=40 14:52:05 Set A/D channel type result=40 14:52:05 Set A/D encoding result=40 14:52:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:05 Set channel filter=0.000000e+000 result=40 14:52:05 Config A/D Result=40 14:52:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:05 Get A/D filter: -9.255963e+061 result=40 14:52:05 Get A/D value=-858993460 result=40 14:52:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:05 Aux= 14:52:05 Message to Camera, serial 91445 queued 14:52:42 Received message from Master: op=PointingHead serial=91458 14:52:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:52:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:52:42 Point started: ret=0 14:52:42 point_skyscan result=0 14:52:43 Check angles 14:52:43 SkyScan query 14:52:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 14:52:43 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 14:52:43 Check angles 14:52:43 SkyScan query 14:52:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 14:52:44 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 14:52:44 Check angles 14:52:44 SkyScan query 14:52:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 14:52:45 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 14:52:45 Check angles 14:52:45 SkyScan query 14:52:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.04<-17736 Statuses=0008 0009 14:52:45 Msec=2250 True Az=112.995 Ze=-86.04 Az status=0008 Ze status=0009 14:52:46 Check angles 14:52:46 SkyScan query 14:52:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.995<-19133 Statuses=0008 0009 14:52:46 Msec=3000 True Az=112.995 Ze=-106.995 Az status=0008 Ze status=0009 14:52:46 Check angles 14:52:46 SkyScan query 14:52:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.95<-20530 Statuses=0008 0009 14:52:47 Msec=3750 True Az=112.995 Ze=-127.95 Az status=0008 Ze status=0009 14:52:47 Check angles 14:52:47 SkyScan query 14:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.905<-21927 Statuses=0008 0009 14:52:48 Msec=4500 True Az=112.995 Ze=-148.905 Az status=0008 Ze status=0009 14:52:48 Check angles 14:52:48 SkyScan query 14:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.845<-23323 Statuses=0008 0009 14:52:48 Msec=5250 True Az=112.995 Ze=-169.845 Az status=0008 Ze status=0009 14:52:49 Check angles 14:52:49 SkyScan query 14:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:52:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:52:49 Message to Master queued w/err=0: serial=91458 error=0 14:52:54 Received message from Master: op=Filter serial=91459 14:52:54 Color wheel filter change from 0 to 0 14:52:54 FLIGetFilterPos err=0 currentPosition=0 14:52:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:54 Filter is already there-color wheel unchanged 14:52:54 Received message from Master: op=Shutter serial=91460 14:52:54 Shutter LASER open 14:52:55 Received message from Camera: op=State serial=91462 14:52:55 GetSingleValue result=40 Value=cccccccc 14:52:55 SkyScan query 14:52:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:52:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:55 Parameters OK 14:52:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:55 Set A/D data flow result=40 14:52:55 Set A/D channel type result=40 14:52:55 Set A/D encoding result=40 14:52:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:55 Set channel filter=0.000000e+000 result=40 14:52:55 Config A/D Result=40 14:52:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:55 Get A/D filter: -9.255963e+061 result=40 14:52:55 Get A/D value=-858993460 result=40 14:52:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:55 Parameters OK 14:52:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:55 Set A/D data flow result=40 14:52:55 Set A/D channel type result=40 14:52:55 Set A/D encoding result=40 14:52:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:55 Set channel filter=0.000000e+000 result=40 14:52:55 Config A/D Result=40 14:52:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:55 Get A/D filter: -9.255963e+061 result=40 14:52:55 Get A/D value=-858993460 result=40 14:52:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:55 Aux= 14:52:55 Message to Camera, serial 91462 queued 14:53:03 Received message from Master: op=Shutter serial=91471 14:53:03 Shutter LASER close 14:53:03 Received message from Master: op=PointingHead serial=91475 14:53:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:53:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:53:04 Point started: ret=0 14:53:04 point_skyscan result=0 14:53:04 Check angles 14:53:04 SkyScan query 14:53:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.695<-21513 Statuses=0008 0009 14:53:05 Msec=0 True Az=112.995 Ze=-142.695 Az status=0008 Ze status=0009 14:53:05 Check angles 14:53:05 SkyScan query 14:53:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.335<-20089 Statuses=0008 0009 14:53:06 Msec=750 True Az=112.995 Ze=-121.335 Az status=0008 Ze status=0009 14:53:06 Check angles 14:53:06 SkyScan query 14:53:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.365<-18691 Statuses=0008 0009 14:53:06 Msec=1500 True Az=112.995 Ze=-100.365 Az status=0008 Ze status=0009 14:53:07 Check angles 14:53:07 SkyScan query 14:53:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.395<-17293 Statuses=0008 0009 14:53:07 Msec=2250 True Az=112.995 Ze=-79.395 Az status=0008 Ze status=0009 14:53:07 Check angles 14:53:07 SkyScan query 14:53:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.99<-15866 Statuses=0008 0009 14:53:08 Msec=3000 True Az=112.995 Ze=-57.99 Az status=0008 Ze status=0009 14:53:08 Check angles 14:53:08 SkyScan query 14:53:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.065<-14471 Statuses=0008 0009 14:53:09 Msec=3750 True Az=112.995 Ze=-37.065 Az status=0008 Ze status=0009 14:53:09 Check angles 14:53:09 SkyScan query 14:53:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.08<-13072 Statuses=0008 0009 14:53:09 Msec=4500 True Az=112.995 Ze=-16.08 Az status=0008 Ze status=0009 14:53:10 Check angles 14:53:10 SkyScan query 14:53:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.695<-11687 Statuses=0008 0009 14:53:10 Msec=5250 True Az=112.995 Ze=4.695 Az status=0008 Ze status=0009 14:53:10 Check angles 14:53:10 SkyScan query 14:53:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:53:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:53:11 Message to Master queued w/err=0: serial=91475 error=0 14:53:16 Received message from Master: op=Filter serial=91476 14:53:16 Color wheel filter change from 0 to 0 14:53:16 FLIGetFilterPos err=0 currentPosition=0 14:53:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:16 Filter is already there-color wheel unchanged 14:53:16 Received message from Master: op=Shutter serial=91477 14:53:16 Shutter LASER close 14:53:16 Received message from Camera: op=State serial=91479 14:53:16 GetSingleValue result=40 Value=cccccccc 14:53:16 SkyScan query 14:53:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:53:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:17 Parameters OK 14:53:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:17 Set A/D data flow result=40 14:53:17 Set A/D channel type result=40 14:53:17 Set A/D encoding result=40 14:53:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:17 Set channel filter=0.000000e+000 result=40 14:53:17 Config A/D Result=40 14:53:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:17 Get A/D filter: -9.255963e+061 result=40 14:53:17 Get A/D value=-858993460 result=40 14:53:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:17 Parameters OK 14:53:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:17 Set A/D data flow result=40 14:53:17 Set A/D channel type result=40 14:53:17 Set A/D encoding result=40 14:53:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:17 Set channel filter=0.000000e+000 result=40 14:53:17 Config A/D Result=40 14:53:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:17 Get A/D filter: -9.255963e+061 result=40 14:53:17 Get A/D value=-858993460 result=40 14:53:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:17 Aux= 14:53:17 Message to Camera, serial 91479 queued 14:53:54 Received message from Master: op=PointingHead serial=91492 14:53:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:53:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:53:54 Point started: ret=0 14:53:54 point_skyscan result=0 14:53:55 Check angles 14:53:55 SkyScan query 14:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:53:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:53:55 Message to Master queued w/err=0: serial=91492 error=0 14:54:00 Received message from Master: op=Filter serial=91493 14:54:00 Color wheel filter change from 0 to 0 14:54:00 FLIGetFilterPos err=0 currentPosition=0 14:54:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:54:00 Filter is already there-color wheel unchanged 14:54:01 Received message from Master: op=Shutter serial=91494 14:54:01 Shutter LASER close 14:54:01 Received message from Camera: op=State serial=91496 14:54:01 GetSingleValue result=40 Value=cccccccc 14:54:01 SkyScan query 14:54:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:54:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:01 Parameters OK 14:54:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:01 Set A/D data flow result=40 14:54:01 Set A/D channel type result=40 14:54:01 Set A/D encoding result=40 14:54:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:01 Set channel filter=0.000000e+000 result=40 14:54:01 Config A/D Result=40 14:54:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:01 Get A/D filter: -9.255963e+061 result=40 14:54:01 Get A/D value=-858993460 result=40 14:54:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:01 Parameters OK 14:54:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:01 Set A/D data flow result=40 14:54:01 Set A/D channel type result=40 14:54:01 Set A/D encoding result=40 14:54:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:01 Set channel filter=0.000000e+000 result=40 14:54:01 Config A/D Result=40 14:54:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:01 Get A/D filter: -9.255963e+061 result=40 14:54:01 Get A/D value=-858993460 result=40 14:54:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:01 Aux= 14:54:01 Message to Camera, serial 91496 queued 14:54:38 Received message from Master: op=PointingHead serial=91509 14:54:38 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:54:38 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:54:38 Point started: ret=0 14:54:38 point_skyscan result=0 14:54:39 Check angles 14:54:39 SkyScan query 14:54:40 SkyScan query done: ret=0 az=135.795<-9053 ze=-6.51<-12434 Statuses=0009 0008 14:54:40 Msec=0 True Az=135.795 Ze=-6.51 Az status=0009 Ze status=0008 14:54:40 Check angles 14:54:40 SkyScan query 14:54:40 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.495<-12433 Statuses=0009 0008 [UTC 2019-3-3 14:54:40] 14:54:40 Msec=750 True Az=153.345 Ze=-6.495 Az status=0009 Ze status=0008 14:54:41 Check angles 14:54:41 SkyScan query 14:54:41 SkyScan query done: ret=0 az=170.775<-11385 ze=-6.495<-12433 Statuses=0009 0008 14:54:41 Msec=1500 True Az=170.775 Ze=-6.495 Az status=0009 Ze status=0008 14:54:41 Check angles 14:54:41 SkyScan query 14:54:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:54:42 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:54:42 Message to Master queued w/err=0: serial=91509 error=0 14:54:47 Received message from Master: op=Filter serial=91510 14:54:47 Color wheel filter change from 0 to 0 14:54:47 FLIGetFilterPos err=0 currentPosition=0 14:54:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:54:47 Filter is already there-color wheel unchanged 14:54:47 Received message from Master: op=Shutter serial=91511 14:54:47 Shutter LASER close 14:54:47 Received message from Camera: op=State serial=91513 14:54:47 GetSingleValue result=40 Value=cccccccc 14:54:47 SkyScan query 14:54:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:54:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:48 Parameters OK 14:54:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:48 Set A/D data flow result=40 14:54:48 Set A/D channel type result=40 14:54:48 Set A/D encoding result=40 14:54:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:48 Set channel filter=0.000000e+000 result=40 14:54:48 Config A/D Result=40 14:54:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:48 Get A/D filter: -9.255963e+061 result=40 14:54:48 Get A/D value=-858993460 result=40 14:54:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:48 Parameters OK 14:54:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:48 Set A/D data flow result=40 14:54:48 Set A/D channel type result=40 14:54:48 Set A/D encoding result=40 14:54:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:48 Set channel filter=0.000000e+000 result=40 14:54:48 Config A/D Result=40 14:54:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:48 Get A/D filter: -9.255963e+061 result=40 14:54:48 Get A/D value=-858993460 result=40 14:54:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:48 Aux= 14:54:48 Message to Camera, serial 91513 queued 14:55:25 Received message from Master: op=PointingHead serial=91526 14:55:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:55:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:55:25 Point started: ret=0 14:55:25 point_skyscan result=0 14:55:26 Check angles 14:55:26 SkyScan query 14:55:26 SkyScan query done: ret=0 az=153.03<-10202 ze=6.51<-11566 Statuses=0009 0008 14:55:26 Msec=0 True Az=153.03 Ze=6.51 Az status=0009 Ze status=0008 14:55:26 Check angles 14:55:26 SkyScan query 14:55:27 SkyScan query done: ret=0 az=135.6<-9040 ze=6.495<-11567 Statuses=0009 0008 14:55:27 Msec=750 True Az=135.6 Ze=6.495 Az status=0009 Ze status=0008 14:55:27 Check angles 14:55:27 SkyScan query 14:55:28 SkyScan query done: ret=0 az=118.095<-7873 ze=6.495<-11567 Statuses=0009 0008 14:55:28 Msec=1500 True Az=118.095 Ze=6.495 Az status=0009 Ze status=0008 14:55:28 Check angles 14:55:28 SkyScan query 14:55:28 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 14:55:28 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 14:55:28 Message to Master queued w/err=0: serial=91526 error=0 14:55:33 Received message from Master: op=Filter serial=91527 14:55:33 Color wheel filter change from 0 to 0 14:55:33 FLIGetFilterPos err=0 currentPosition=0 14:55:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:33 Filter is already there-color wheel unchanged 14:55:34 Received message from Master: op=Shutter serial=91528 14:55:34 Shutter LASER close 14:55:34 Received message from Camera: op=State serial=91530 14:55:34 GetSingleValue result=40 Value=cccccccc 14:55:34 SkyScan query 14:55:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:55:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:34 Parameters OK 14:55:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:34 Set A/D data flow result=40 14:55:34 Set A/D channel type result=40 14:55:34 Set A/D encoding result=40 14:55:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:34 Set channel filter=0.000000e+000 result=40 14:55:34 Config A/D Result=40 14:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:34 Get A/D filter: -9.255963e+061 result=40 14:55:34 Get A/D value=-858993460 result=40 14:55:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:34 Parameters OK 14:55:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:34 Set A/D data flow result=40 14:55:34 Set A/D channel type result=40 14:55:34 Set A/D encoding result=40 14:55:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:34 Set channel filter=0.000000e+000 result=40 14:55:34 Config A/D Result=40 14:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:34 Get A/D filter: -9.255963e+061 result=40 14:55:34 Get A/D value=-858993460 result=40 14:55:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:34 Aux= 14:55:34 Message to Camera, serial 91530 queued 14:56:11 Received message from Master: op=PointingHead serial=91543 14:56:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:56:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:56:11 Point started: ret=0 14:56:11 point_skyscan result=0 14:56:12 Check angles 14:56:12 SkyScan query 14:56:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 14:56:13 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 14:56:13 Check angles 14:56:13 SkyScan query 14:56:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 14:56:13 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 14:56:14 Check angles 14:56:14 SkyScan query 14:56:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.295<-16353 Statuses=0008 0009 14:56:14 Msec=1500 True Az=112.995 Ze=-65.295 Az status=0008 Ze status=0009 14:56:14 Check angles 14:56:14 SkyScan query 14:56:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.265<-17751 Statuses=0008 0009 14:56:15 Msec=2250 True Az=112.995 Ze=-86.265 Az status=0008 Ze status=0009 14:56:15 Check angles 14:56:15 SkyScan query 14:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.64<-19176 Statuses=0008 0009 14:56:16 Msec=3000 True Az=112.995 Ze=-107.64 Az status=0008 Ze status=0009 14:56:16 Check angles 14:56:16 SkyScan query 14:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 14:56:16 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 14:56:17 Check angles 14:56:17 SkyScan query 14:56:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.52<-21968 Statuses=0008 0009 14:56:17 Msec=4500 True Az=112.995 Ze=-149.52 Az status=0008 Ze status=0009 14:56:17 Check angles 14:56:17 SkyScan query 14:56:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.49<-23366 Statuses=0008 0009 14:56:18 Msec=5250 True Az=112.995 Ze=-170.49 Az status=0008 Ze status=0009 14:56:18 Check angles 14:56:18 SkyScan query 14:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:56:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:56:19 Message to Master queued w/err=0: serial=91543 error=0 14:56:24 Received message from Master: op=Filter serial=91544 14:56:24 Color wheel filter change from 0 to 0 14:56:24 FLIGetFilterPos err=0 currentPosition=0 14:56:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:24 Filter is already there-color wheel unchanged 14:56:24 Received message from Master: op=Shutter serial=91545 14:56:24 Shutter LASER open 14:56:24 Received message from Camera: op=State serial=91547 14:56:24 GetSingleValue result=40 Value=cccccccc 14:56:24 SkyScan query 14:56:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:56:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:25 Parameters OK 14:56:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:25 Set A/D data flow result=40 14:56:25 Set A/D channel type result=40 14:56:25 Set A/D encoding result=40 14:56:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:25 Set channel filter=0.000000e+000 result=40 14:56:25 Config A/D Result=40 14:56:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:25 Get A/D filter: -9.255963e+061 result=40 14:56:25 Get A/D value=-858993460 result=40 14:56:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:25 Parameters OK 14:56:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:25 Set A/D data flow result=40 14:56:25 Set A/D channel type result=40 14:56:25 Set A/D encoding result=40 14:56:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:25 Set channel filter=0.000000e+000 result=40 14:56:25 Config A/D Result=40 14:56:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:25 Get A/D filter: -9.255963e+061 result=40 14:56:25 Get A/D value=-858993460 result=40 14:56:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:25 Aux= 14:56:25 Message to Camera, serial 91547 queued 14:56:33 Received message from Master: op=Shutter serial=91557 14:56:33 Shutter LASER close 14:56:34 Received message from Master: op=PointingHead serial=91561 14:56:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:56:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:56:34 Point started: ret=0 14:56:34 point_skyscan result=0 14:56:35 Check angles 14:56:35 SkyScan query 14:56:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 14:56:35 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 14:56:35 Check angles 14:56:35 SkyScan query 14:56:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 14:56:36 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 14:56:36 Check angles 14:56:36 SkyScan query 14:56:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.37<-18758 Statuses=0008 0009 14:56:37 Msec=1500 True Az=112.995 Ze=-101.37 Az status=0008 Ze status=0009 14:56:37 Check angles 14:56:37 SkyScan query 14:56:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.415<-17361 Statuses=0008 0009 14:56:37 Msec=2250 True Az=112.995 Ze=-80.415 Az status=0008 Ze status=0009 14:56:38 Check angles 14:56:38 SkyScan query 14:56:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.445<-15963 Statuses=0008 0009 14:56:38 Msec=3000 True Az=112.995 Ze=-59.445 Az status=0008 Ze status=0009 14:56:38 Check angles 14:56:38 SkyScan query 14:56:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.49<-14566 Statuses=0008 0009 14:56:39 Msec=3750 True Az=112.995 Ze=-38.49 Az status=0008 Ze status=0009 14:56:39 Check angles 14:56:39 SkyScan query 14:56:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.55<-13170 Statuses=0008 0009 14:56:40 Msec=4500 True Az=112.995 Ze=-17.55 Az status=0008 Ze status=0009 14:56:40 Check angles 14:56:40 SkyScan query 14:56:40 SkyScan query done: ret=0 az=112.995<-7533 ze=3.42<-11772 Statuses=0008 0009 14:56:40 Msec=5250 True Az=112.995 Ze=3.42 Az status=0008 Ze status=0009 14:56:41 Check angles 14:56:41 SkyScan query 14:56:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:56:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:56:41 Message to Master queued w/err=0: serial=91561 error=0 14:56:46 Received message from Master: op=Filter serial=91562 14:56:46 Color wheel filter change from 0 to 0 14:56:46 FLIGetFilterPos err=0 currentPosition=0 14:56:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:46 Filter is already there-color wheel unchanged 14:56:46 Received message from Master: op=Shutter serial=91563 14:56:46 Shutter LASER close 14:56:47 Received message from Camera: op=State serial=91565 14:56:47 GetSingleValue result=40 Value=cccccccc 14:56:47 SkyScan query 14:56:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:56:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:47 Parameters OK 14:56:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:47 Set A/D data flow result=40 14:56:47 Set A/D channel type result=40 14:56:47 Set A/D encoding result=40 14:56:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:47 Set channel filter=0.000000e+000 result=40 14:56:47 Config A/D Result=40 14:56:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:47 Get A/D filter: -9.255963e+061 result=40 14:56:47 Get A/D value=-858993460 result=40 14:56:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:47 Parameters OK 14:56:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:47 Set A/D data flow result=40 14:56:47 Set A/D channel type result=40 14:56:47 Set A/D encoding result=40 14:56:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:47 Set channel filter=0.000000e+000 result=40 14:56:47 Config A/D Result=40 14:56:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:47 Get A/D filter: -9.255963e+061 result=40 14:56:47 Get A/D value=-858993460 result=40 14:56:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:47 Aux= 14:56:47 Message to Camera, serial 91565 queued 14:57:24 Received message from Master: op=PointingHead serial=91578 14:57:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:57:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:57:24 Point started: ret=0 14:57:24 point_skyscan result=0 14:57:25 Check angles 14:57:25 SkyScan query 14:57:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:57:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:57:26 Message to Master queued w/err=0: serial=91578 error=0 14:57:31 Received message from Master: op=Filter serial=91579 14:57:31 Color wheel filter change from 0 to 0 14:57:31 FLIGetFilterPos err=0 currentPosition=0 14:57:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:31 Filter is already there-color wheel unchanged 14:57:31 Received message from Master: op=Shutter serial=91580 14:57:31 Shutter LASER close 14:57:31 Received message from Camera: op=State serial=91582 14:57:31 GetSingleValue result=40 Value=cccccccc 14:57:31 SkyScan query 14:57:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:57:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:32 Parameters OK 14:57:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:32 Set A/D data flow result=40 14:57:32 Set A/D channel type result=40 14:57:32 Set A/D encoding result=40 14:57:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:32 Set channel filter=0.000000e+000 result=40 14:57:32 Config A/D Result=40 14:57:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:32 Get A/D filter: -9.255963e+061 result=40 14:57:32 Get A/D value=-858993460 result=40 14:57:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:32 Parameters OK 14:57:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:32 Set A/D data flow result=40 14:57:32 Set A/D channel type result=40 14:57:32 Set A/D encoding result=40 14:57:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:32 Set channel filter=0.000000e+000 result=40 14:57:32 Config A/D Result=40 14:57:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:32 Get A/D filter: -9.255963e+061 result=40 14:57:32 Get A/D value=-858993460 result=40 14:57:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:32 Aux= 14:57:32 Message to Camera, serial 91582 queued 14:58:08 Received message from Master: op=PointingHead serial=91595 14:58:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:58:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:58:09 Point started: ret=0 14:58:09 point_skyscan result=0 14:58:09 Check angles 14:58:09 SkyScan query 14:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:58:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:58:10 Message to Master queued w/err=0: serial=91595 error=0 14:58:15 Received message from Master: op=Filter serial=91596 14:58:15 Color wheel filter change from 0 to 0 14:58:15 FLIGetFilterPos err=0 currentPosition=0 14:58:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:15 Filter is already there-color wheel unchanged 14:58:15 Received message from Master: op=Shutter serial=91597 14:58:15 Shutter LASER close 14:58:15 Received message from Camera: op=State serial=91599 14:58:15 GetSingleValue result=40 Value=cccccccc 14:58:15 SkyScan query 14:58:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:58:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:16 Parameters OK 14:58:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:16 Set A/D data flow result=40 14:58:16 Set A/D channel type result=40 14:58:16 Set A/D encoding result=40 14:58:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:16 Set channel filter=0.000000e+000 result=40 14:58:16 Config A/D Result=40 14:58:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:16 Get A/D filter: -9.255963e+061 result=40 14:58:16 Get A/D value=-858993460 result=40 14:58:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:16 Parameters OK 14:58:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:16 Set A/D data flow result=40 14:58:16 Set A/D channel type result=40 14:58:16 Set A/D encoding result=40 14:58:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:16 Set channel filter=0.000000e+000 result=40 14:58:16 Config A/D Result=40 14:58:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:16 Get A/D filter: -9.255963e+061 result=40 14:58:16 Get A/D value=-858993460 result=40 14:58:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:16 Aux= 14:58:16 Message to Camera, serial 91599 queued 14:58:53 Received message from Master: op=PointingHead serial=91612 14:58:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:58:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:58:53 Point started: ret=0 14:58:53 point_skyscan result=0 14:58:54 Check angles 14:58:54 SkyScan query 14:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:58:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:58:54 Message to Master queued w/err=0: serial=91612 error=0 14:58:59 Received message from Master: op=Filter serial=91613 14:58:59 Color wheel filter change from 0 to 0 14:58:59 FLIGetFilterPos err=0 currentPosition=0 14:58:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:59 Filter is already there-color wheel unchanged 14:59:00 Received message from Master: op=Shutter serial=91614 14:59:00 Shutter LASER close 14:59:00 Received message from Camera: op=State serial=91616 14:59:00 GetSingleValue result=40 Value=cccccccc 14:59:00 SkyScan query 14:59:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:59:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:00 Parameters OK 14:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:00 Set A/D data flow result=40 14:59:00 Set A/D channel type result=40 14:59:00 Set A/D encoding result=40 14:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:00 Set channel filter=0.000000e+000 result=40 14:59:00 Config A/D Result=40 14:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:00 Get A/D filter: -9.255963e+061 result=40 14:59:00 Get A/D value=-858993460 result=40 14:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:00 Parameters OK 14:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:00 Set A/D data flow result=40 14:59:00 Set A/D channel type result=40 14:59:00 Set A/D encoding result=40 14:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:00 Set channel filter=0.000000e+000 result=40 14:59:00 Config A/D Result=40 14:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:00 Get A/D filter: -9.255963e+061 result=40 14:59:00 Get A/D value=-858993460 result=40 14:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:00 Aux= 14:59:00 Message to Camera, serial 91616 queued 14:59:37 Received message from Master: op=PointingHead serial=91629 14:59:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:59:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:59:37 Point started: ret=0 14:59:37 point_skyscan result=0 14:59:38 Check angles 14:59:38 SkyScan query 14:59:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 14:59:39 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 14:59:39 Check angles 14:59:39 SkyScan query 14:59:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.09<-15006 Statuses=0008 0009 14:59:39 Msec=750 True Az=112.995 Ze=-45.09 Az status=0008 Ze status=0009 14:59:40 Check angles 14:59:40 SkyScan query 14:59:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.03<-16402 Statuses=0008 0009 14:59:40 Msec=1500 True Az=112.995 Ze=-66.03 Az status=0008 Ze status=0009 14:59:40 Check angles 14:59:40 SkyScan query 14:59:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.985<-17799 Statuses=0008 0009 14:59:41 Msec=2250 True Az=112.995 Ze=-86.985 Az status=0008 Ze status=0009 14:59:41 Check angles 14:59:41 SkyScan query 14:59:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.345<-19223 Statuses=0008 0009 14:59:42 Msec=3000 True Az=112.995 Ze=-108.345 Az status=0008 Ze status=0009 14:59:42 Check angles 14:59:42 SkyScan query 14:59:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.315<-20621 Statuses=0008 0009 14:59:42 Msec=3750 True Az=112.995 Ze=-129.315 Az status=0008 Ze status=0009 14:59:43 Check angles 14:59:43 SkyScan query 14:59:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.285<-22019 Statuses=0008 0009 14:59:43 Msec=4500 True Az=112.995 Ze=-150.285 Az status=0008 Ze status=0009 14:59:43 Check angles 14:59:43 SkyScan query 14:59:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.075<-23405 Statuses=0008 0009 14:59:44 Msec=5250 True Az=112.995 Ze=-171.075 Az status=0008 Ze status=0009 14:59:44 Check angles 14:59:44 SkyScan query 14:59:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:59:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:59:45 Message to Master queued w/err=0: serial=91629 error=0 14:59:50 Received message from Master: op=Filter serial=91630 14:59:50 Color wheel filter change from 0 to 0 14:59:50 FLIGetFilterPos err=0 currentPosition=0 14:59:50 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:50 Filter is already there-color wheel unchanged 14:59:50 Received message from Master: op=Shutter serial=91631 14:59:50 Shutter LASER open 14:59:50 Received message from Camera: op=State serial=91633 14:59:50 GetSingleValue result=40 Value=cccccccc 14:59:50 SkyScan query 14:59:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:59:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:51 Parameters OK 14:59:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:51 Set A/D data flow result=40 14:59:51 Set A/D channel type result=40 14:59:51 Set A/D encoding result=40 14:59:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:51 Set channel filter=0.000000e+000 result=40 14:59:51 Config A/D Result=40 14:59:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:51 Get A/D filter: -9.255963e+061 result=40 14:59:51 Get A/D value=-858993460 result=40 14:59:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:51 Parameters OK 14:59:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:51 Set A/D data flow result=40 14:59:51 Set A/D channel type result=40 14:59:51 Set A/D encoding result=40 14:59:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:51 Set channel filter=0.000000e+000 result=40 14:59:51 Config A/D Result=40 14:59:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:51 Get A/D filter: -9.255963e+061 result=40 14:59:51 Get A/D value=-858993460 result=40 14:59:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:51 Aux= 14:59:51 Message to Camera, serial 91633 queued 14:59:59 Received message from Master: op=Shutter serial=91643 14:59:59 Shutter LASER close 15:00:00 Received message from Master: op=PointingHead serial=91647 15:00:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:00:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:00:00 Point started: ret=0 15:00:00 point_skyscan result=0 15:00:01 Check angles 15:00:01 SkyScan query 15:00:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.695<-21513 Statuses=0008 0009 15:00:01 Msec=0 True Az=112.995 Ze=-142.695 Az status=0008 Ze status=0009 15:00:02 Check angles 15:00:02 SkyScan query 15:00:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.725<-20115 Statuses=0008 0009 15:00:02 Msec=750 True Az=112.995 Ze=-121.725 Az status=0008 Ze status=0009 15:00:02 Check angles 15:00:02 SkyScan query 15:00:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 15:00:03 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 15:00:03 Check angles 15:00:03 SkyScan query 15:00:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 15:00:04 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 15:00:04 Check angles 15:00:04 SkyScan query 15:00:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.425<-15895 Statuses=0008 0009 15:00:04 Msec=3000 True Az=112.995 Ze=-58.425 Az status=0008 Ze status=0009 15:00:05 Check angles 15:00:05 SkyScan query 15:00:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.065<-14471 Statuses=0008 0009 15:00:05 Msec=3750 True Az=112.995 Ze=-37.065 Az status=0008 Ze status=0009 15:00:05 Check angles 15:00:05 SkyScan query 15:00:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.08<-13072 Statuses=0008 0009 15:00:06 Msec=4500 True Az=112.995 Ze=-16.08 Az status=0008 Ze status=0009 15:00:06 Check angles 15:00:06 SkyScan query 15:00:07 SkyScan query done: ret=0 az=112.995<-7533 ze=4.695<-11687 Statuses=0008 0009 15:00:07 Msec=5250 True Az=112.995 Ze=4.695 Az status=0008 Ze status=0009 15:00:07 Check angles 15:00:07 SkyScan query 15:00:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:00:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:00:07 Message to Master queued w/err=0: serial=91647 error=0 15:00:12 Received message from Master: op=Filter serial=91648 15:00:12 Color wheel filter change from 0 to 0 15:00:12 FLIGetFilterPos err=0 currentPosition=0 15:00:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:12 Filter is already there-color wheel unchanged 15:00:13 Received message from Master: op=Shutter serial=91649 15:00:13 Shutter LASER close 15:00:13 Received message from Camera: op=State serial=91651 15:00:13 GetSingleValue result=40 Value=cccccccc 15:00:13 SkyScan query 15:00:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:00:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:13 Parameters OK 15:00:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:13 Set A/D data flow result=40 15:00:13 Set A/D channel type result=40 15:00:13 Set A/D encoding result=40 15:00:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:13 Set channel filter=0.000000e+000 result=40 15:00:13 Config A/D Result=40 15:00:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:13 Get A/D filter: -9.255963e+061 result=40 15:00:13 Get A/D value=-858993460 result=40 15:00:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:13 Parameters OK 15:00:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:13 Set A/D data flow result=40 15:00:13 Set A/D channel type result=40 15:00:13 Set A/D encoding result=40 15:00:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:13 Set channel filter=0.000000e+000 result=40 15:00:13 Config A/D Result=40 15:00:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:13 Get A/D filter: -9.255963e+061 result=40 15:00:13 Get A/D value=-858993460 result=40 15:00:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:13 Aux= 15:00:13 Message to Camera, serial 91651 queued 15:00:50 Received message from Master: op=PointingHead serial=91664 15:00:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:00:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:00:50 Point started: ret=0 15:00:50 point_skyscan result=0 15:00:51 Check angles 15:00:51 SkyScan query 15:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:00:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:00:52 Message to Master queued w/err=0: serial=91664 error=0 15:00:57 Received message from Master: op=Filter serial=91665 15:00:57 Color wheel filter change from 0 to 0 15:00:57 FLIGetFilterPos err=0 currentPosition=0 15:00:57 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:57 Filter is already there-color wheel unchanged 15:00:57 Received message from Master: op=Shutter serial=91666 15:00:57 Shutter LASER close 15:00:57 Received message from Camera: op=State serial=91668 15:00:57 GetSingleValue result=40 Value=cccccccc 15:00:57 SkyScan query 15:00:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:00:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:58 Parameters OK 15:00:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:58 Set A/D data flow result=40 15:00:58 Set A/D channel type result=40 15:00:58 Set A/D encoding result=40 15:00:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:58 Set channel filter=0.000000e+000 result=40 15:00:58 Config A/D Result=40 15:00:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:58 Get A/D filter: -9.255963e+061 result=40 15:00:58 Get A/D value=-858993460 result=40 15:00:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:58 Parameters OK 15:00:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:58 Set A/D data flow result=40 15:00:58 Set A/D channel type result=40 15:00:58 Set A/D encoding result=40 15:00:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:58 Set channel filter=0.000000e+000 result=40 15:00:58 Config A/D Result=40 15:00:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:58 Get A/D filter: -9.255963e+061 result=40 15:00:58 Get A/D value=-858993460 result=40 15:00:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:58 Aux= 15:00:58 Message to Camera, serial 91668 queued 15:01:34 Received message from Master: op=PointingHead serial=91681 15:01:34 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:01:34 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:01:35 Point started: ret=0 15:01:35 point_skyscan result=0 15:01:36 Check angles 15:01:36 SkyScan query 15:01:36 SkyScan query done: ret=0 az=135.855<-9057 ze=-6.51<-12434 Statuses=0009 0008 15:01:36 Msec=0 True Az=135.855 Ze=-6.51 Az status=0009 Ze status=0008 15:01:36 Check angles 15:01:36 SkyScan query 15:01:37 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 15:01:37 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 15:01:37 Check angles 15:01:37 SkyScan query 15:01:38 SkyScan query done: ret=0 az=171.615<-11441 ze=-6.495<-12433 Statuses=0009 0008 15:01:38 Msec=1500 True Az=171.615 Ze=-6.495 Az status=0009 Ze status=0008 15:01:38 Check angles 15:01:38 SkyScan query 15:01:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:01:38 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:01:38 Message to Master queued w/err=0: serial=91681 error=0 15:01:43 Received message from Master: op=Filter serial=91682 15:01:43 Color wheel filter change from 0 to 0 15:01:43 FLIGetFilterPos err=0 currentPosition=0 15:01:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:01:43 Filter is already there-color wheel unchanged 15:01:44 Received message from Master: op=Shutter serial=91683 15:01:44 Shutter LASER close 15:01:44 Received message from Camera: op=State serial=91685 15:01:44 GetSingleValue result=40 Value=cccccccc 15:01:44 SkyScan query 15:01:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:01:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:44 Parameters OK 15:01:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:44 Set A/D data flow result=40 15:01:44 Set A/D channel type result=40 15:01:44 Set A/D encoding result=40 15:01:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:44 Set channel filter=0.000000e+000 result=40 15:01:44 Config A/D Result=40 15:01:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:44 Get A/D filter: -9.255963e+061 result=40 15:01:44 Get A/D value=-858993460 result=40 15:01:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:44 Parameters OK 15:01:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:44 Set A/D data flow result=40 15:01:44 Set A/D channel type result=40 15:01:44 Set A/D encoding result=40 15:01:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:44 Set channel filter=0.000000e+000 result=40 15:01:44 Config A/D Result=40 15:01:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:44 Get A/D filter: -9.255963e+061 result=40 15:01:44 Get A/D value=-858993460 result=40 15:01:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:01:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:01:44 Aux= 15:01:44 Message to Camera, serial 91685 queued 15:02:20 Received message from Master: op=PointingHead serial=91697 15:02:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:02:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:02:20 Point started: ret=0 15:02:20 point_skyscan result=0 15:02:21 Check angles 15:02:21 SkyScan query 15:02:22 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 15:02:22 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 15:02:22 Check angles 15:02:22 SkyScan query 15:02:22 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 15:02:22 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 15:02:23 Check angles 15:02:23 SkyScan query 15:02:23 SkyScan query done: ret=0 az=117.645<-7843 ze=6.495<-11567 Statuses=0009 0008 15:02:23 Msec=1500 True Az=117.645 Ze=6.495 Az status=0009 Ze status=0008 15:02:23 Check angles 15:02:23 SkyScan query 15:02:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:02:24 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:02:24 Message to Master queued w/err=0: serial=91697 error=0 15:02:29 Received message from Master: op=Filter serial=91698 15:02:29 Color wheel filter change from 0 to 0 15:02:29 FLIGetFilterPos err=0 currentPosition=0 15:02:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:29 Filter is already there-color wheel unchanged 15:02:29 Received message from Master: op=Shutter serial=91699 15:02:29 Shutter LASER close 15:02:29 Received message from Camera: op=State serial=91701 15:02:29 GetSingleValue result=40 Value=cccccccc 15:02:29 SkyScan query 15:02:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:02:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:30 Parameters OK 15:02:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:30 Set A/D data flow result=40 15:02:30 Set A/D channel type result=40 15:02:30 Set A/D encoding result=40 15:02:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:30 Set channel filter=0.000000e+000 result=40 15:02:30 Config A/D Result=40 15:02:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:30 Get A/D filter: -9.255963e+061 result=40 15:02:30 Get A/D value=-858993460 result=40 15:02:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:30 Parameters OK 15:02:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:30 Set A/D data flow result=40 15:02:30 Set A/D channel type result=40 15:02:30 Set A/D encoding result=40 15:02:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:30 Set channel filter=0.000000e+000 result=40 15:02:30 Config A/D Result=40 15:02:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:30 Get A/D filter: -9.255963e+061 result=40 15:02:30 Get A/D value=-858993460 result=40 15:02:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:30 Aux= 15:02:30 Message to Camera, serial 91701 queued 15:03:07 Received message from Master: op=PointingHead serial=91714 15:03:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:03:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:03:07 Point started: ret=0 15:03:07 point_skyscan result=0 15:03:08 Check angles 15:03:08 SkyScan query 15:03:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 15:03:08 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 15:03:08 Check angles 15:03:08 SkyScan query 15:03:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 15:03:09 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 15:03:09 Check angles 15:03:09 SkyScan query 15:03:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 15:03:10 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 15:03:10 Check angles 15:03:10 SkyScan query 15:03:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.16<-17744 Statuses=0008 0009 15:03:11 Msec=2250 True Az=112.995 Ze=-86.16 Az status=0008 Ze status=0009 15:03:11 Check angles 15:03:11 SkyScan query 15:03:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.1<-19140 Statuses=0008 0009 15:03:11 Msec=3000 True Az=112.995 Ze=-107.1 Az status=0008 Ze status=0009 15:03:11 Check angles 15:03:11 SkyScan query 15:03:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.055<-20537 Statuses=0008 0009 15:03:12 Msec=3750 True Az=112.995 Ze=-128.055 Az status=0008 Ze status=0009 15:03:12 Check angles 15:03:12 SkyScan query 15:03:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.01<-21934 Statuses=0008 0009 15:03:13 Msec=4500 True Az=112.995 Ze=-149.01 Az status=0008 Ze status=0009 15:03:13 Check angles 15:03:13 SkyScan query 15:03:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.95<-23330 Statuses=0008 0009 15:03:14 Msec=5250 True Az=112.995 Ze=-169.95 Az status=0008 Ze status=0009 15:03:14 Check angles 15:03:14 SkyScan query 15:03:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:03:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:03:14 Message to Master queued w/err=0: serial=91714 error=0 15:03:19 Received message from Master: op=Filter serial=91715 15:03:19 Color wheel filter change from 0 to 0 15:03:19 FLIGetFilterPos err=0 currentPosition=0 15:03:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:19 Filter is already there-color wheel unchanged 15:03:19 Received message from Master: op=Shutter serial=91716 15:03:19 Shutter LASER open 15:03:20 Received message from Camera: op=State serial=91718 15:03:20 GetSingleValue result=40 Value=cccccccc 15:03:20 SkyScan query 15:03:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:03:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:20 Parameters OK 15:03:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:20 Set A/D data flow result=40 15:03:20 Set A/D channel type result=40 15:03:20 Set A/D encoding result=40 15:03:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:20 Set channel filter=0.000000e+000 result=40 15:03:20 Config A/D Result=40 15:03:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:20 Get A/D filter: -9.255963e+061 result=40 15:03:20 Get A/D value=-858993460 result=40 15:03:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:20 Parameters OK 15:03:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:20 Set A/D data flow result=40 15:03:20 Set A/D channel type result=40 15:03:20 Set A/D encoding result=40 15:03:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:20 Set channel filter=0.000000e+000 result=40 15:03:20 Config A/D Result=40 15:03:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:20 Get A/D filter: -9.255963e+061 result=40 15:03:20 Get A/D value=-858993460 result=40 15:03:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:20 Aux= 15:03:20 Message to Camera, serial 91718 queued 15:03:29 Received message from Master: op=Shutter serial=91728 15:03:29 Shutter LASER close 15:03:29 Received message from Master: op=PointingHead serial=91732 15:03:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:03:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:03:29 Point started: ret=0 15:03:29 point_skyscan result=0 15:03:30 Check angles 15:03:30 SkyScan query 15:03:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 15:03:31 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 15:03:31 Check angles 15:03:31 SkyScan query 15:03:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.455<-20097 Statuses=0008 0009 15:03:32 Msec=750 True Az=112.995 Ze=-121.455 Az status=0008 Ze status=0009 15:03:32 Check angles 15:03:32 SkyScan query 15:03:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 15:03:32 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 15:03:32 Check angles 15:03:32 SkyScan query 15:03:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.545<-17303 Statuses=0008 0009 15:03:33 Msec=2250 True Az=112.995 Ze=-79.545 Az status=0008 Ze status=0009 15:03:33 Check angles 15:03:33 SkyScan query 15:03:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.125<-15875 Statuses=0008 0009 15:03:34 Msec=3000 True Az=112.995 Ze=-58.125 Az status=0008 Ze status=0009 15:03:34 Check angles 15:03:34 SkyScan query 15:03:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.2<-14480 Statuses=0008 0009 15:03:35 Msec=3750 True Az=112.995 Ze=-37.2 Az status=0008 Ze status=0009 15:03:35 Check angles 15:03:35 SkyScan query 15:03:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.23<-13082 Statuses=0008 0009 15:03:35 Msec=4500 True Az=112.995 Ze=-16.23 Az status=0008 Ze status=0009 15:03:35 Check angles 15:03:35 SkyScan query 15:03:36 SkyScan query done: ret=0 az=112.995<-7533 ze=4.59<-11694 Statuses=0008 0009 15:03:36 Msec=5250 True Az=112.995 Ze=4.59 Az status=0008 Ze status=0009 15:03:36 Check angles 15:03:36 SkyScan query 15:03:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:03:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:03:37 Message to Master queued w/err=0: serial=91732 error=0 15:03:38 Received message from Master: op=Identify serial=91733 15:03:42 Received message from Master: op=Filter serial=91736 15:03:42 Color wheel filter change from 0 to 0 15:03:42 FLIGetFilterPos err=0 currentPosition=0 15:03:42 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:42 Filter is already there-color wheel unchanged 15:03:42 Received message from Master: op=Shutter serial=91737 15:03:42 Shutter LASER close 15:03:42 Received message from Camera: op=State serial=91739 15:03:42 GetSingleValue result=40 Value=cccccccc 15:03:42 SkyScan query 15:03:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:03:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:43 Parameters OK 15:03:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:43 Set A/D data flow result=40 15:03:43 Set A/D channel type result=40 15:03:43 Set A/D encoding result=40 15:03:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:43 Set channel filter=0.000000e+000 result=40 15:03:43 Config A/D Result=40 15:03:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:43 Get A/D filter: -9.255963e+061 result=40 15:03:43 Get A/D value=-858993460 result=40 15:03:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:43 Parameters OK 15:03:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:43 Set A/D data flow result=40 15:03:43 Set A/D channel type result=40 15:03:43 Set A/D encoding result=40 15:03:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:43 Set channel filter=0.000000e+000 result=40 15:03:43 Config A/D Result=40 15:03:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:43 Get A/D filter: -9.255963e+061 result=40 15:03:43 Get A/D value=-858993460 result=40 15:03:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:43 Aux= 15:03:43 Message to Camera, serial 91739 queued [UTC 2019-3-3 15:03:50] 15:04:20 Received message from Master: op=PointingHead serial=91752 15:04:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:04:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:04:20 Point started: ret=0 15:04:20 point_skyscan result=0 15:04:21 Check angles 15:04:21 SkyScan query 15:04:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:04:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:04:21 Message to Master queued w/err=0: serial=91752 error=0 15:04:26 Received message from Master: op=Filter serial=91753 15:04:26 Color wheel filter change from 0 to 0 15:04:26 FLIGetFilterPos err=0 currentPosition=0 15:04:26 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:26 Filter is already there-color wheel unchanged 15:04:26 Received message from Master: op=Shutter serial=91754 15:04:26 Shutter LASER close 15:04:26 Received message from Camera: op=State serial=91756 15:04:26 GetSingleValue result=40 Value=cccccccc 15:04:26 SkyScan query 15:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:04:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:27 Parameters OK 15:04:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:27 Set A/D data flow result=40 15:04:27 Set A/D channel type result=40 15:04:27 Set A/D encoding result=40 15:04:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:27 Set channel filter=0.000000e+000 result=40 15:04:27 Config A/D Result=40 15:04:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:27 Get A/D filter: -9.255963e+061 result=40 15:04:27 Get A/D value=-858993460 result=40 15:04:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:27 Parameters OK 15:04:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:27 Set A/D data flow result=40 15:04:27 Set A/D channel type result=40 15:04:27 Set A/D encoding result=40 15:04:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:27 Set channel filter=0.000000e+000 result=40 15:04:27 Config A/D Result=40 15:04:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:27 Get A/D filter: -9.255963e+061 result=40 15:04:27 Get A/D value=-858993460 result=40 15:04:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:27 Aux= 15:04:27 Message to Camera, serial 91756 queued 15:05:04 Received message from Master: op=PointingHead serial=91769 15:05:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:05:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:05:04 Point started: ret=0 15:05:04 point_skyscan result=0 15:05:05 Check angles 15:05:05 SkyScan query 15:05:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:05:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:05:06 Message to Master queued w/err=0: serial=91769 error=0 15:05:11 Received message from Master: op=Filter serial=91770 15:05:11 Color wheel filter change from 0 to 0 15:05:11 FLIGetFilterPos err=0 currentPosition=0 15:05:11 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:11 Filter is already there-color wheel unchanged 15:05:11 Received message from Master: op=Shutter serial=91771 15:05:11 Shutter LASER close 15:05:11 Received message from Camera: op=State serial=91773 15:05:11 GetSingleValue result=40 Value=cccccccc 15:05:11 SkyScan query 15:05:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:05:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:11 Parameters OK 15:05:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:11 Set A/D data flow result=40 15:05:11 Set A/D channel type result=40 15:05:11 Set A/D encoding result=40 15:05:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:11 Set channel filter=0.000000e+000 result=40 15:05:11 Config A/D Result=40 15:05:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:11 Get A/D filter: -9.255963e+061 result=40 15:05:11 Get A/D value=-858993460 result=40 15:05:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:11 Parameters OK 15:05:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:11 Set A/D data flow result=40 15:05:11 Set A/D channel type result=40 15:05:11 Set A/D encoding result=40 15:05:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:11 Set channel filter=0.000000e+000 result=40 15:05:11 Config A/D Result=40 15:05:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:11 Get A/D filter: -9.255963e+061 result=40 15:05:11 Get A/D value=-858993460 result=40 15:05:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:11 Aux= 15:05:11 Message to Camera, serial 91773 queued 15:05:48 Received message from Master: op=PointingHead serial=91786 15:05:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:05:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:05:49 Point started: ret=0 15:05:49 point_skyscan result=0 15:05:49 Check angles 15:05:49 SkyScan query 15:05:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:05:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:05:50 Message to Master queued w/err=0: serial=91786 error=0 15:05:55 Received message from Master: op=Filter serial=91787 15:05:55 Color wheel filter change from 0 to 0 15:05:55 FLIGetFilterPos err=0 currentPosition=0 15:05:55 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:55 Filter is already there-color wheel unchanged 15:05:55 Received message from Master: op=Shutter serial=91788 15:05:55 Shutter LASER close 15:05:55 Received message from Camera: op=State serial=91790 15:05:55 GetSingleValue result=40 Value=cccccccc 15:05:55 SkyScan query 15:05:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:05:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:56 Parameters OK 15:05:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:56 Set A/D data flow result=40 15:05:56 Set A/D channel type result=40 15:05:56 Set A/D encoding result=40 15:05:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:56 Set channel filter=0.000000e+000 result=40 15:05:56 Config A/D Result=40 15:05:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:56 Get A/D filter: -9.255963e+061 result=40 15:05:56 Get A/D value=-858993460 result=40 15:05:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:56 Parameters OK 15:05:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:56 Set A/D data flow result=40 15:05:56 Set A/D channel type result=40 15:05:56 Set A/D encoding result=40 15:05:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:56 Set channel filter=0.000000e+000 result=40 15:05:56 Config A/D Result=40 15:05:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:56 Get A/D filter: -9.255963e+061 result=40 15:05:56 Get A/D value=-858993460 result=40 15:05:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:56 Aux= 15:05:56 Message to Camera, serial 91790 queued 15:06:32 Received message from Master: op=PointingHead serial=91803 15:06:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:06:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:06:33 Point started: ret=0 15:06:33 point_skyscan result=0 15:06:34 Check angles 15:06:34 SkyScan query 15:06:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.85<-13590 Statuses=0008 0009 15:06:34 Msec=0 True Az=112.995 Ze=-23.85 Az status=0008 Ze status=0009 15:06:34 Check angles 15:06:34 SkyScan query 15:06:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 15:06:35 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 15:06:35 Check angles 15:06:35 SkyScan query 15:06:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.165<-16411 Statuses=0008 0009 15:06:36 Msec=1500 True Az=112.995 Ze=-66.165 Az status=0008 Ze status=0009 15:06:36 Check angles 15:06:36 SkyScan query 15:06:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.12<-17808 Statuses=0008 0009 15:06:36 Msec=2250 True Az=112.995 Ze=-87.12 Az status=0008 Ze status=0009 15:06:37 Check angles 15:06:37 SkyScan query 15:06:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.075<-19205 Statuses=0008 0009 15:06:37 Msec=3000 True Az=112.995 Ze=-108.075 Az status=0008 Ze status=0009 15:06:37 Check angles 15:06:37 SkyScan query 15:06:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.465<-20631 Statuses=0008 0009 15:06:38 Msec=3750 True Az=112.995 Ze=-129.465 Az status=0008 Ze status=0009 15:06:38 Check angles 15:06:38 SkyScan query 15:06:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.42<-22028 Statuses=0008 0009 15:06:39 Msec=4500 True Az=112.995 Ze=-150.42 Az status=0008 Ze status=0009 15:06:39 Check angles 15:06:39 SkyScan query 15:06:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0008 0009 15:06:39 Msec=5250 True Az=112.995 Ze=-171.18 Az status=0008 Ze status=0009 15:06:40 Check angles 15:06:40 SkyScan query 15:06:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:06:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:06:40 Message to Master queued w/err=0: serial=91803 error=0 15:06:45 Received message from Master: op=Filter serial=91804 15:06:45 Color wheel filter change from 0 to 0 15:06:45 FLIGetFilterPos err=0 currentPosition=0 15:06:45 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:45 Filter is already there-color wheel unchanged 15:06:45 Received message from Master: op=Shutter serial=91805 15:06:45 Shutter LASER open 15:06:46 Received message from Camera: op=State serial=91807 15:06:46 GetSingleValue result=40 Value=cccccccc 15:06:46 SkyScan query 15:06:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:06:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:46 Parameters OK 15:06:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:46 Set A/D data flow result=40 15:06:46 Set A/D channel type result=40 15:06:46 Set A/D encoding result=40 15:06:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:46 Set channel filter=0.000000e+000 result=40 15:06:46 Config A/D Result=40 15:06:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:46 Get A/D filter: -9.255963e+061 result=40 15:06:46 Get A/D value=-858993460 result=40 15:06:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:46 Parameters OK 15:06:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:46 Set A/D data flow result=40 15:06:46 Set A/D channel type result=40 15:06:46 Set A/D encoding result=40 15:06:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:46 Set channel filter=0.000000e+000 result=40 15:06:46 Config A/D Result=40 15:06:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:46 Get A/D filter: -9.255963e+061 result=40 15:06:46 Get A/D value=-858993460 result=40 15:06:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:46 Aux= 15:06:46 Message to Camera, serial 91807 queued 15:06:54 Received message from Master: op=Shutter serial=91816 15:06:54 Shutter LASER close 15:06:54 Received message from Master: op=PointingHead serial=91820 15:06:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:06:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:06:55 Point started: ret=0 15:06:55 point_skyscan result=0 15:06:55 Check angles 15:06:55 SkyScan query 15:06:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.535<-21569 Statuses=0008 0009 15:06:56 Msec=0 True Az=112.995 Ze=-143.535 Az status=0008 Ze status=0009 15:06:56 Check angles 15:06:56 SkyScan query 15:06:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 15:06:57 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 15:06:57 Check angles 15:06:57 SkyScan query 15:06:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.625<-18775 Statuses=0008 0009 15:06:57 Msec=1500 True Az=112.995 Ze=-101.625 Az status=0008 Ze status=0009 15:06:58 Check angles 15:06:58 SkyScan query 15:06:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.64<-17376 Statuses=0008 0009 15:06:58 Msec=2250 True Az=112.995 Ze=-80.64 Az status=0008 Ze status=0009 15:06:58 Check angles 15:06:58 SkyScan query 15:06:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 15:06:59 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 15:06:59 Check angles 15:06:59 SkyScan query 15:07:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.31<-14554 Statuses=0008 0009 15:07:00 Msec=3750 True Az=112.995 Ze=-38.31 Az status=0008 Ze status=0009 15:07:00 Check angles 15:07:00 SkyScan query 15:07:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.37<-13158 Statuses=0008 0009 15:07:00 Msec=4500 True Az=112.995 Ze=-17.37 Az status=0008 Ze status=0009 15:07:01 Check angles 15:07:01 SkyScan query 15:07:01 SkyScan query done: ret=0 az=112.995<-7533 ze=3.6<-11760 Statuses=0008 0009 15:07:01 Msec=5250 True Az=112.995 Ze=3.6 Az status=0008 Ze status=0009 15:07:01 Check angles 15:07:01 SkyScan query 15:07:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:07:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:07:02 Message to Master queued w/err=0: serial=91820 error=0 15:07:07 Received message from Master: op=Filter serial=91821 15:07:07 Color wheel filter change from 0 to 0 15:07:07 FLIGetFilterPos err=0 currentPosition=0 15:07:07 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:07 Filter is already there-color wheel unchanged 15:07:07 Received message from Master: op=Shutter serial=91822 15:07:07 Shutter LASER close 15:07:07 Received message from Camera: op=State serial=91824 15:07:07 GetSingleValue result=40 Value=cccccccc 15:07:07 SkyScan query 15:07:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:07:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:08 Parameters OK 15:07:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:08 Set A/D data flow result=40 15:07:08 Set A/D channel type result=40 15:07:08 Set A/D encoding result=40 15:07:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:08 Set channel filter=0.000000e+000 result=40 15:07:08 Config A/D Result=40 15:07:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:08 Get A/D filter: -9.255963e+061 result=40 15:07:08 Get A/D value=-858993460 result=40 15:07:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:08 Parameters OK 15:07:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:08 Set A/D data flow result=40 15:07:08 Set A/D channel type result=40 15:07:08 Set A/D encoding result=40 15:07:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:08 Set channel filter=0.000000e+000 result=40 15:07:08 Config A/D Result=40 15:07:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:08 Get A/D filter: -9.255963e+061 result=40 15:07:08 Get A/D value=-858993460 result=40 15:07:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:08 Aux= 15:07:08 Message to Camera, serial 91824 queued 15:07:44 Received message from Master: op=PointingHead serial=91836 15:07:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:07:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:07:44 Point started: ret=0 15:07:44 point_skyscan result=0 15:07:45 Check angles 15:07:45 SkyScan query 15:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:07:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:07:45 Message to Master queued w/err=0: serial=91836 error=0 15:07:50 Received message from Master: op=Filter serial=91837 15:07:50 Color wheel filter change from 0 to 0 15:07:50 FLIGetFilterPos err=0 currentPosition=0 15:07:50 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:50 Filter is already there-color wheel unchanged 15:07:51 Received message from Master: op=Shutter serial=91838 15:07:51 Shutter LASER close 15:07:51 Received message from Camera: op=State serial=91840 15:07:51 GetSingleValue result=40 Value=cccccccc 15:07:51 SkyScan query 15:07:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:07:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:51 Parameters OK 15:07:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:51 Set A/D data flow result=40 15:07:51 Set A/D channel type result=40 15:07:51 Set A/D encoding result=40 15:07:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:51 Set channel filter=0.000000e+000 result=40 15:07:51 Config A/D Result=40 15:07:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:51 Get A/D filter: -9.255963e+061 result=40 15:07:51 Get A/D value=-858993460 result=40 15:07:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:51 Parameters OK 15:07:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:51 Set A/D data flow result=40 15:07:51 Set A/D channel type result=40 15:07:51 Set A/D encoding result=40 15:07:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:51 Set channel filter=0.000000e+000 result=40 15:07:51 Config A/D Result=40 15:07:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:51 Get A/D filter: -9.255963e+061 result=40 15:07:51 Get A/D value=-858993460 result=40 15:07:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:51 Aux= 15:07:51 Message to Camera, serial 91840 queued 15:08:28 Received message from Master: op=PointingHead serial=91853 15:08:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:08:28 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:08:28 Point started: ret=0 15:08:28 point_skyscan result=0 15:08:29 Check angles 15:08:29 SkyScan query 15:08:30 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 15:08:30 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 15:08:30 Check angles 15:08:30 SkyScan query 15:08:30 SkyScan query done: ret=0 az=153.585<-10239 ze=-6.495<-12433 Statuses=0009 0008 15:08:30 Msec=750 True Az=153.585 Ze=-6.495 Az status=0009 Ze status=0008 15:08:31 Check angles 15:08:31 SkyScan query 15:08:31 SkyScan query done: ret=0 az=171.03<-11402 ze=-6.495<-12433 Statuses=0009 0008 15:08:31 Msec=1500 True Az=171.03 Ze=-6.495 Az status=0009 Ze status=0008 15:08:31 Check angles 15:08:31 SkyScan query 15:08:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:08:32 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:08:32 Message to Master queued w/err=0: serial=91853 error=0 15:08:37 Received message from Master: op=Filter serial=91854 15:08:37 Color wheel filter change from 0 to 0 15:08:37 FLIGetFilterPos err=0 currentPosition=0 15:08:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:37 Filter is already there-color wheel unchanged 15:08:37 Received message from Master: op=Shutter serial=91855 15:08:37 Shutter LASER close 15:08:37 Received message from Camera: op=State serial=91857 15:08:37 GetSingleValue result=40 Value=cccccccc 15:08:37 SkyScan query 15:08:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:08:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:38 Parameters OK 15:08:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:38 Set A/D data flow result=40 15:08:38 Set A/D channel type result=40 15:08:38 Set A/D encoding result=40 15:08:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:38 Set channel filter=0.000000e+000 result=40 15:08:38 Config A/D Result=40 15:08:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:38 Get A/D filter: -9.255963e+061 result=40 15:08:38 Get A/D value=-858993460 result=40 15:08:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:38 Parameters OK 15:08:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:38 Set A/D data flow result=40 15:08:38 Set A/D channel type result=40 15:08:38 Set A/D encoding result=40 15:08:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:38 Set channel filter=0.000000e+000 result=40 15:08:38 Config A/D Result=40 15:08:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:38 Get A/D filter: -9.255963e+061 result=40 15:08:38 Get A/D value=-858993460 result=40 15:08:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:38 Aux= 15:08:38 Message to Camera, serial 91857 queued 15:09:15 Received message from Master: op=PointingHead serial=91870 15:09:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:09:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:09:15 Point started: ret=0 15:09:15 point_skyscan result=0 15:09:16 Check angles 15:09:16 SkyScan query 15:09:16 SkyScan query done: ret=0 az=152.805<-10187 ze=6.51<-11566 Statuses=0009 0008 15:09:16 Msec=0 True Az=152.805 Ze=6.51 Az status=0009 Ze status=0008 15:09:16 Check angles 15:09:16 SkyScan query 15:09:17 SkyScan query done: ret=0 az=134.91<-8994 ze=6.495<-11567 Statuses=0009 0008 15:09:17 Msec=750 True Az=134.91 Ze=6.495 Az status=0009 Ze status=0008 15:09:17 Check angles 15:09:17 SkyScan query 15:09:18 SkyScan query done: ret=0 az=117.465<-7831 ze=6.495<-11567 Statuses=0009 0008 15:09:18 Msec=1500 True Az=117.465 Ze=6.495 Az status=0009 Ze status=0008 15:09:18 Check angles 15:09:18 SkyScan query 15:09:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:09:18 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:09:18 Message to Master queued w/err=0: serial=91870 error=0 15:09:23 Received message from Master: op=Filter serial=91871 15:09:23 Color wheel filter change from 0 to 0 15:09:23 FLIGetFilterPos err=0 currentPosition=0 15:09:23 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:23 Filter is already there-color wheel unchanged 15:09:24 Received message from Master: op=Shutter serial=91872 15:09:24 Shutter LASER close 15:09:24 Received message from Camera: op=State serial=91874 15:09:24 GetSingleValue result=40 Value=cccccccc 15:09:24 SkyScan query 15:09:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:09:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:24 Parameters OK 15:09:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:24 Set A/D data flow result=40 15:09:24 Set A/D channel type result=40 15:09:24 Set A/D encoding result=40 15:09:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:24 Set channel filter=0.000000e+000 result=40 15:09:24 Config A/D Result=40 15:09:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:24 Get A/D filter: -9.255963e+061 result=40 15:09:24 Get A/D value=-858993460 result=40 15:09:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:24 Parameters OK 15:09:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:24 Set A/D data flow result=40 15:09:24 Set A/D channel type result=40 15:09:24 Set A/D encoding result=40 15:09:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:24 Set channel filter=0.000000e+000 result=40 15:09:24 Config A/D Result=40 15:09:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:24 Get A/D filter: -9.255963e+061 result=40 15:09:24 Get A/D value=-858993460 result=40 15:09:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:24 Aux= 15:09:24 Message to Camera, serial 91874 queued 15:10:01 Received message from Master: op=PointingHead serial=91887 15:10:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:10:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:10:01 Point started: ret=0 15:10:01 point_skyscan result=0 15:10:02 Check angles 15:10:02 SkyScan query 15:10:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 15:10:03 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 15:10:03 Check angles 15:10:03 SkyScan query 15:10:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 15:10:04 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 15:10:04 Check angles 15:10:04 SkyScan query 15:10:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.935<-16329 Statuses=0008 0009 15:10:04 Msec=1500 True Az=112.995 Ze=-64.935 Az status=0008 Ze status=0009 15:10:04 Check angles 15:10:04 SkyScan query 15:10:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 15:10:05 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 15:10:05 Check angles 15:10:05 SkyScan query 15:10:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 15:10:06 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 15:10:06 Check angles 15:10:06 SkyScan query 15:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.22<-20548 Statuses=0008 0009 15:10:07 Msec=3750 True Az=112.995 Ze=-128.22 Az status=0008 Ze status=0009 15:10:07 Check angles 15:10:07 SkyScan query 15:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.61<-21974 Statuses=0008 0009 15:10:07 Msec=4500 True Az=112.995 Ze=-149.61 Az status=0008 Ze status=0009 15:10:07 Check angles 15:10:07 SkyScan query 15:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 15:10:08 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 15:10:08 Check angles 15:10:08 SkyScan query 15:10:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:10:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:10:09 Message to Master queued w/err=0: serial=91887 error=0 15:10:14 Received message from Master: op=Filter serial=91888 15:10:14 Color wheel filter change from 0 to 0 15:10:14 FLIGetFilterPos err=0 currentPosition=0 15:10:14 FLIGetStepsRemaining err=0 RemainingSteps=0 15:10:14 Filter is already there-color wheel unchanged 15:10:14 Received message from Master: op=Shutter serial=91889 15:10:14 Shutter LASER open 15:10:14 Received message from Camera: op=State serial=91891 15:10:14 GetSingleValue result=40 Value=cccccccc 15:10:14 SkyScan query 15:10:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:10:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:15 Parameters OK 15:10:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:15 Set A/D data flow result=40 15:10:15 Set A/D channel type result=40 15:10:15 Set A/D encoding result=40 15:10:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:15 Set channel filter=0.000000e+000 result=40 15:10:15 Config A/D Result=40 15:10:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:15 Get A/D filter: -9.255963e+061 result=40 15:10:15 Get A/D value=-858993460 result=40 15:10:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:15 Parameters OK 15:10:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:15 Set A/D data flow result=40 15:10:15 Set A/D channel type result=40 15:10:15 Set A/D encoding result=40 15:10:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:15 Set channel filter=0.000000e+000 result=40 15:10:15 Config A/D Result=40 15:10:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:15 Get A/D filter: -9.255963e+061 result=40 15:10:15 Get A/D value=-858993460 result=40 15:10:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:10:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:10:15 Aux= 15:10:15 Message to Camera, serial 91891 queued 15:10:23 Received message from Master: op=Shutter serial=91901 15:10:23 Shutter LASER close 15:10:24 Received message from Master: op=PointingHead serial=91905 15:10:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:10:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:10:24 Point started: ret=0 15:10:24 point_skyscan result=0 15:10:25 Check angles 15:10:25 SkyScan query 15:10:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 15:10:25 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 15:10:25 Check angles 15:10:25 SkyScan query 15:10:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 15:10:26 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 15:10:26 Check angles 15:10:26 SkyScan query 15:10:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 15:10:27 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 15:10:27 Check angles 15:10:27 SkyScan query 15:10:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.8<-17320 Statuses=0008 0009 15:10:28 Msec=2250 True Az=112.995 Ze=-79.8 Az status=0008 Ze status=0009 15:10:28 Check angles 15:10:28 SkyScan query 15:10:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.86<-15924 Statuses=0008 0009 15:10:28 Msec=3000 True Az=112.995 Ze=-58.86 Az status=0008 Ze status=0009 15:10:28 Check angles 15:10:28 SkyScan query 15:10:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 15:10:29 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 15:10:29 Check angles 15:10:29 SkyScan query 15:10:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.455<-13097 Statuses=0008 0009 15:10:30 Msec=4500 True Az=112.995 Ze=-16.455 Az status=0008 Ze status=0009 15:10:30 Check angles 15:10:30 SkyScan query 15:10:31 SkyScan query done: ret=0 az=112.995<-7533 ze=4.41<-11706 Statuses=0008 0009 15:10:31 Msec=5250 True Az=112.995 Ze=4.41 Az status=0008 Ze status=0009 15:10:31 Check angles 15:10:31 SkyScan query 15:10:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:10:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:10:31 Message to Master queued w/err=0: serial=91905 error=0 15:10:36 Received message from Master: op=Filter serial=91906 15:10:36 Color wheel filter change from 0 to 0 15:10:36 FLIGetFilterPos err=0 currentPosition=0 15:10:36 FLIGetStepsRemaining err=0 RemainingSteps=0 15:10:36 Filter is already there-color wheel unchanged 15:10:36 Received message from Master: op=Shutter serial=91907 15:10:36 Shutter LASER close 15:10:37 Received message from Camera: op=State serial=91909 15:10:37 GetSingleValue result=40 Value=cccccccc 15:10:37 SkyScan query 15:10:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:10:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:37 Parameters OK 15:10:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:37 Set A/D data flow result=40 15:10:37 Set A/D channel type result=40 15:10:37 Set A/D encoding result=40 15:10:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:37 Set channel filter=0.000000e+000 result=40 15:10:37 Config A/D Result=40 15:10:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:37 Get A/D filter: -9.255963e+061 result=40 15:10:37 Get A/D value=-858993460 result=40 15:10:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:37 Parameters OK 15:10:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:37 Set A/D data flow result=40 15:10:37 Set A/D channel type result=40 15:10:37 Set A/D encoding result=40 15:10:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:37 Set channel filter=0.000000e+000 result=40 15:10:37 Config A/D Result=40 15:10:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:37 Get A/D filter: -9.255963e+061 result=40 15:10:37 Get A/D value=-858993460 result=40 15:10:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:10:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:10:37 Aux= 15:10:37 Message to Camera, serial 91909 queued 15:11:14 Received message from Master: op=PointingHead serial=91922 15:11:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:11:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:11:14 Point started: ret=0 15:11:14 point_skyscan result=0 15:11:15 Check angles 15:11:15 SkyScan query 15:11:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:11:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:11:16 Message to Master queued w/err=0: serial=91922 error=0 15:11:21 Received message from Master: op=Filter serial=91923 15:11:21 Color wheel filter change from 0 to 0 15:11:21 FLIGetFilterPos err=0 currentPosition=0 15:11:21 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:21 Filter is already there-color wheel unchanged 15:11:21 Received message from Master: op=Shutter serial=91924 15:11:21 Shutter LASER close 15:11:21 Received message from Camera: op=State serial=91926 15:11:21 GetSingleValue result=40 Value=cccccccc 15:11:21 SkyScan query 15:11:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:11:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:22 Parameters OK 15:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:22 Set A/D data flow result=40 15:11:22 Set A/D channel type result=40 15:11:22 Set A/D encoding result=40 15:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:22 Set channel filter=0.000000e+000 result=40 15:11:22 Config A/D Result=40 15:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:22 Get A/D filter: -9.255963e+061 result=40 15:11:22 Get A/D value=-858993460 result=40 15:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:22 Parameters OK 15:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:22 Set A/D data flow result=40 15:11:22 Set A/D channel type result=40 15:11:22 Set A/D encoding result=40 15:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:22 Set channel filter=0.000000e+000 result=40 15:11:22 Config A/D Result=40 15:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:22 Get A/D filter: -9.255963e+061 result=40 15:11:22 Get A/D value=-858993460 result=40 15:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:22 Aux= 15:11:22 Message to Camera, serial 91926 queued 15:11:58 Received message from Master: op=PointingHead serial=91939 15:11:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:11:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:11:59 Point started: ret=0 15:11:59 point_skyscan result=0 15:12:00 Check angles 15:12:00 SkyScan query 15:12:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:12:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:12:00 Message to Master queued w/err=0: serial=91939 error=0 15:12:05 Received message from Master: op=Filter serial=91940 15:12:05 Color wheel filter change from 0 to 0 15:12:05 FLIGetFilterPos err=0 currentPosition=0 15:12:05 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:05 Filter is already there-color wheel unchanged 15:12:05 Received message from Master: op=Shutter serial=91941 15:12:05 Shutter LASER close 15:12:05 Received message from Camera: op=State serial=91943 15:12:05 GetSingleValue result=40 Value=cccccccc 15:12:05 SkyScan query 15:12:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:12:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:06 Parameters OK 15:12:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:06 Set A/D data flow result=40 15:12:06 Set A/D channel type result=40 15:12:06 Set A/D encoding result=40 15:12:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:06 Set channel filter=0.000000e+000 result=40 15:12:06 Config A/D Result=40 15:12:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:06 Get A/D filter: -9.255963e+061 result=40 15:12:06 Get A/D value=-858993460 result=40 15:12:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:06 Parameters OK 15:12:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:06 Set A/D data flow result=40 15:12:06 Set A/D channel type result=40 15:12:06 Set A/D encoding result=40 15:12:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:06 Set channel filter=0.000000e+000 result=40 15:12:06 Config A/D Result=40 15:12:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:06 Get A/D filter: -9.255963e+061 result=40 15:12:06 Get A/D value=-858993460 result=40 15:12:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:06 Aux= 15:12:06 Message to Camera, serial 91943 queued 15:12:43 Received message from Master: op=PointingHead serial=91956 15:12:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:12:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:12:43 Point started: ret=0 15:12:43 point_skyscan result=0 15:12:44 Check angles 15:12:44 SkyScan query 15:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:12:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:12:44 Message to Master queued w/err=0: serial=91956 error=0 15:12:49 Received message from Master: op=Filter serial=91957 15:12:49 Color wheel filter change from 0 to 0 15:12:49 FLIGetFilterPos err=0 currentPosition=0 15:12:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:49 Filter is already there-color wheel unchanged 15:12:50 Received message from Master: op=Shutter serial=91958 15:12:50 Shutter LASER close 15:12:50 Received message from Camera: op=State serial=91960 15:12:50 GetSingleValue result=40 Value=cccccccc 15:12:50 SkyScan query 15:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:12:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:50 Parameters OK 15:12:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:50 Set A/D data flow result=40 15:12:50 Set A/D channel type result=40 15:12:50 Set A/D encoding result=40 15:12:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:50 Set channel filter=0.000000e+000 result=40 15:12:50 Config A/D Result=40 15:12:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:50 Get A/D filter: -9.255963e+061 result=40 15:12:50 Get A/D value=-858993460 result=40 15:12:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:50 Parameters OK 15:12:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:50 Set A/D data flow result=40 15:12:50 Set A/D channel type result=40 15:12:50 Set A/D encoding result=40 15:12:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:50 Set channel filter=0.000000e+000 result=40 15:12:50 Config A/D Result=40 15:12:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:50 Get A/D filter: -9.255963e+061 result=40 15:12:50 Get A/D value=-858993460 result=40 15:12:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:50 Aux= 15:12:50 Message to Camera, serial 91960 queued 15:13:27 Received message from Master: op=PointingHead serial=91973 15:13:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:13:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:13:27 Point started: ret=0 15:13:27 point_skyscan result=0 15:13:28 Check angles 15:13:28 SkyScan query 15:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 15:13:29 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 15:13:29 Check angles 15:13:29 SkyScan query 15:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 15:13:29 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 15:13:30 Check angles 15:13:30 SkyScan query 15:13:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 15:13:30 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 15:13:30 Check angles 15:13:30 SkyScan query 15:13:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.58<-17772 Statuses=0008 0009 15:13:31 Msec=2250 True Az=112.995 Ze=-86.58 Az status=0008 Ze status=0009 15:13:31 Check angles 15:13:31 SkyScan query 15:13:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.535<-19169 Statuses=0008 0009 15:13:32 Msec=3000 True Az=112.995 Ze=-107.535 Az status=0008 Ze status=0009 15:13:32 Check angles 15:13:32 SkyScan query 15:13:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.475<-20565 Statuses=0008 0009 15:13:32 Msec=3750 True Az=112.995 Ze=-128.475 Az status=0008 Ze status=0009 15:13:33 Check angles 15:13:33 SkyScan query 15:13:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.43<-21962 Statuses=0008 0009 15:13:33 Msec=4500 True Az=112.995 Ze=-149.43 Az status=0008 Ze status=0009 15:13:33 Check angles 15:13:33 SkyScan query 15:13:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.37<-23358 Statuses=0008 0009 15:13:34 Msec=5250 True Az=112.995 Ze=-170.37 Az status=0008 Ze status=0009 15:13:34 Check angles 15:13:34 SkyScan query 15:13:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:13:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:13:35 Message to Master queued w/err=0: serial=91973 error=0 15:13:40 Received message from Master: op=Filter serial=91974 15:13:40 Color wheel filter change from 0 to 0 15:13:40 FLIGetFilterPos err=0 currentPosition=0 15:13:40 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:40 Filter is already there-color wheel unchanged 15:13:40 Received message from Master: op=Shutter serial=91975 15:13:40 Shutter LASER open 15:13:40 Received message from Camera: op=State serial=91977 15:13:40 GetSingleValue result=40 Value=cccccccc 15:13:40 SkyScan query 15:13:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:13:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:41 Parameters OK 15:13:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:41 Set A/D data flow result=40 15:13:41 Set A/D channel type result=40 15:13:41 Set A/D encoding result=40 15:13:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:41 Set channel filter=0.000000e+000 result=40 15:13:41 Config A/D Result=40 15:13:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:41 Get A/D filter: -9.255963e+061 result=40 15:13:41 Get A/D value=-858993460 result=40 15:13:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:41 Parameters OK 15:13:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:41 Set A/D data flow result=40 15:13:41 Set A/D channel type result=40 15:13:41 Set A/D encoding result=40 15:13:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:41 Set channel filter=0.000000e+000 result=40 15:13:41 Config A/D Result=40 15:13:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:41 Get A/D filter: -9.255963e+061 result=40 15:13:41 Get A/D value=-858993460 result=40 15:13:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:41 Aux= 15:13:41 Message to Camera, serial 91977 queued 15:13:49 Received message from Master: op=Shutter serial=91987 15:13:49 Shutter LASER close 15:13:50 Received message from Master: op=PointingHead serial=91991 15:13:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:13:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:13:50 Point started: ret=0 15:13:50 point_skyscan result=0 15:13:51 Check angles 15:13:51 SkyScan query 15:13:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 15:13:51 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 15:13:52 Check angles 15:13:52 SkyScan query 15:13:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 15:13:52 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 15:13:52 Check angles 15:13:52 SkyScan query 15:13:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.605<-18707 Statuses=0008 0009 15:13:53 Msec=1500 True Az=112.995 Ze=-100.605 Az status=0008 Ze status=0009 15:13:53 Check angles 15:13:53 SkyScan query 15:13:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.2<-17280 Statuses=0008 0009 15:13:54 Msec=2250 True Az=112.995 Ze=-79.2 Az status=0008 Ze status=0009 15:13:54 Check angles 15:13:54 SkyScan query 15:13:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.825<-15855 Statuses=0008 0009 15:13:54 Msec=3000 True Az=112.995 Ze=-57.825 Az status=0008 Ze status=0009 15:13:55 Check angles 15:13:55 SkyScan query 15:13:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.87<-14458 Statuses=0008 0009 15:13:55 Msec=3750 True Az=112.995 Ze=-36.87 Az status=0008 Ze status=0009 15:13:55 Check angles 15:13:55 SkyScan query 15:13:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.9<-13060 Statuses=0008 0009 15:13:56 Msec=4500 True Az=112.995 Ze=-15.9 Az status=0008 Ze status=0009 15:13:56 Check angles 15:13:56 SkyScan query 15:13:57 SkyScan query done: ret=0 az=112.995<-7533 ze=4.83<-11678 Statuses=0008 0009 15:13:57 Msec=5250 True Az=112.995 Ze=4.83 Az status=0008 Ze status=0009 15:13:57 Check angles 15:13:57 SkyScan query 15:13:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:13:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:13:57 Message to Master queued w/err=0: serial=91991 error=0 15:14:02 Received message from Master: op=Filter serial=91992 15:14:02 Color wheel filter change from 0 to 0 15:14:02 FLIGetFilterPos err=0 currentPosition=0 15:14:02 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:02 Filter is already there-color wheel unchanged 15:14:03 Received message from Master: op=Shutter serial=91993 15:14:03 Shutter LASER close 15:14:03 Received message from Camera: op=State serial=91995 15:14:03 GetSingleValue result=40 Value=cccccccc 15:14:03 SkyScan query 15:14:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:14:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:03 Parameters OK 15:14:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:03 Set A/D data flow result=40 15:14:03 Set A/D channel type result=40 15:14:03 Set A/D encoding result=40 15:14:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:03 Set channel filter=0.000000e+000 result=40 15:14:03 Config A/D Result=40 15:14:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:03 Get A/D filter: -9.255963e+061 result=40 15:14:03 Get A/D value=-858993460 result=40 15:14:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:03 Parameters OK 15:14:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:03 Set A/D data flow result=40 15:14:03 Set A/D channel type result=40 15:14:03 Set A/D encoding result=40 15:14:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:03 Set channel filter=0.000000e+000 result=40 15:14:03 Config A/D Result=40 15:14:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:03 Get A/D filter: -9.255963e+061 result=40 15:14:03 Get A/D value=-858993460 result=40 15:14:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:03 Aux= 15:14:03 Message to Camera, serial 91995 queued 15:14:40 Received message from Master: op=PointingHead serial=92008 15:14:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:14:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:14:41 Point started: ret=0 15:14:41 point_skyscan result=0 15:14:41 Check angles 15:14:41 SkyScan query 15:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:14:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:14:42 Message to Master queued w/err=0: serial=92008 error=0 15:14:47 Received message from Master: op=Filter serial=92009 15:14:47 Color wheel filter change from 0 to 0 [UTC 2019-3-3 15:14:47] 15:14:47 FLIGetFilterPos err=0 currentPosition=0 15:14:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:47 Filter is already there-color wheel unchanged 15:14:47 Received message from Master: op=Shutter serial=92010 15:14:47 Shutter LASER close 15:14:47 Received message from Camera: op=State serial=92012 15:14:47 GetSingleValue result=40 Value=cccccccc 15:14:47 SkyScan query 15:14:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:14:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:48 Parameters OK 15:14:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:48 Set A/D data flow result=40 15:14:48 Set A/D channel type result=40 15:14:48 Set A/D encoding result=40 15:14:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:48 Set channel filter=0.000000e+000 result=40 15:14:48 Config A/D Result=40 15:14:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:48 Get A/D filter: -9.255963e+061 result=40 15:14:48 Get A/D value=-858993460 result=40 15:14:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:48 Parameters OK 15:14:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:48 Set A/D data flow result=40 15:14:48 Set A/D channel type result=40 15:14:48 Set A/D encoding result=40 15:14:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:48 Set channel filter=0.000000e+000 result=40 15:14:48 Config A/D Result=40 15:14:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:48 Get A/D filter: -9.255963e+061 result=40 15:14:48 Get A/D value=-858993460 result=40 15:14:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:48 Aux= 15:14:48 Message to Camera, serial 92012 queued 15:15:25 Received message from Master: op=PointingHead serial=92025 15:15:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:15:25 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:15:25 Point started: ret=0 15:15:25 point_skyscan result=0 15:15:26 Check angles 15:15:26 SkyScan query 15:15:26 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 15:15:26 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 15:15:26 Check angles 15:15:26 SkyScan query 15:15:27 SkyScan query done: ret=0 az=153.315<-10221 ze=-6.495<-12433 Statuses=0009 0008 15:15:27 Msec=750 True Az=153.315 Ze=-6.495 Az status=0009 Ze status=0008 15:15:27 Check angles 15:15:27 SkyScan query 15:15:28 SkyScan query done: ret=0 az=170.745<-11383 ze=-6.495<-12433 Statuses=0009 0008 15:15:28 Msec=1500 True Az=170.745 Ze=-6.495 Az status=0009 Ze status=0008 15:15:28 Check angles 15:15:28 SkyScan query 15:15:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:15:28 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:15:28 Message to Master queued w/err=0: serial=92025 error=0 15:15:33 Received message from Master: op=Filter serial=92026 15:15:33 Color wheel filter change from 0 to 0 15:15:33 FLIGetFilterPos err=0 currentPosition=0 15:15:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:33 Filter is already there-color wheel unchanged 15:15:34 Received message from Master: op=Shutter serial=92027 15:15:34 Shutter LASER close 15:15:34 Received message from Camera: op=State serial=92029 15:15:34 GetSingleValue result=40 Value=cccccccc 15:15:34 SkyScan query 15:15:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:15:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:34 Parameters OK 15:15:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:34 Set A/D data flow result=40 15:15:34 Set A/D channel type result=40 15:15:34 Set A/D encoding result=40 15:15:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:34 Set channel filter=0.000000e+000 result=40 15:15:34 Config A/D Result=40 15:15:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:34 Get A/D filter: -9.255963e+061 result=40 15:15:34 Get A/D value=-858993460 result=40 15:15:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:34 Parameters OK 15:15:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:34 Set A/D data flow result=40 15:15:34 Set A/D channel type result=40 15:15:34 Set A/D encoding result=40 15:15:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:34 Set channel filter=0.000000e+000 result=40 15:15:34 Config A/D Result=40 15:15:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:34 Get A/D filter: -9.255963e+061 result=40 15:15:34 Get A/D value=-858993460 result=40 15:15:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:34 Aux= 15:15:34 Message to Camera, serial 92029 queued 15:16:11 Received message from Master: op=PointingHead serial=92042 15:16:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:16:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:16:12 Point started: ret=0 15:16:12 point_skyscan result=0 15:16:12 Check angles 15:16:12 SkyScan query 15:16:13 SkyScan query done: ret=0 az=152.565<-10171 ze=6.51<-11566 Statuses=0009 0008 15:16:13 Msec=0 True Az=152.565 Ze=6.51 Az status=0009 Ze status=0008 15:16:13 Check angles 15:16:13 SkyScan query 15:16:14 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 15:16:14 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 15:16:14 Check angles 15:16:14 SkyScan query 15:16:14 SkyScan query done: ret=0 az=117.24<-7816 ze=6.495<-11567 Statuses=0009 0008 15:16:14 Msec=1500 True Az=117.24 Ze=6.495 Az status=0009 Ze status=0008 15:16:15 Check angles 15:16:15 SkyScan query 15:16:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:16:15 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:16:15 Message to Master queued w/err=0: serial=92042 error=0 15:16:20 Received message from Master: op=Filter serial=92043 15:16:20 Color wheel filter change from 0 to 0 15:16:20 FLIGetFilterPos err=0 currentPosition=0 15:16:20 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:20 Filter is already there-color wheel unchanged 15:16:20 Received message from Master: op=Shutter serial=92044 15:16:20 Shutter LASER close 15:16:20 Received message from Camera: op=State serial=92046 15:16:20 GetSingleValue result=40 Value=cccccccc 15:16:20 SkyScan query 15:16:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:16:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:21 Parameters OK 15:16:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:21 Set A/D data flow result=40 15:16:21 Set A/D channel type result=40 15:16:21 Set A/D encoding result=40 15:16:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:21 Set channel filter=0.000000e+000 result=40 15:16:21 Config A/D Result=40 15:16:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:21 Get A/D filter: -9.255963e+061 result=40 15:16:21 Get A/D value=-858993460 result=40 15:16:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:21 Parameters OK 15:16:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:21 Set A/D data flow result=40 15:16:21 Set A/D channel type result=40 15:16:21 Set A/D encoding result=40 15:16:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:21 Set channel filter=0.000000e+000 result=40 15:16:21 Config A/D Result=40 15:16:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:21 Get A/D filter: -9.255963e+061 result=40 15:16:21 Get A/D value=-858993460 result=40 15:16:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:21 Aux= 15:16:21 Message to Camera, serial 92046 queued 15:16:58 Received message from Master: op=PointingHead serial=92059 15:16:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:16:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:16:58 Point started: ret=0 15:16:58 point_skyscan result=0 15:16:59 Check angles 15:16:59 SkyScan query 15:16:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 15:16:59 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 15:17:00 Check angles 15:17:00 SkyScan query 15:17:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 15:17:00 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 15:17:00 Check angles 15:17:00 SkyScan query 15:17:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 15:17:01 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 15:17:01 Check angles 15:17:01 SkyScan query 15:17:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 15:17:02 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 15:17:02 Check angles 15:17:02 SkyScan query 15:17:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.595<-19173 Statuses=0008 0009 15:17:02 Msec=3000 True Az=112.995 Ze=-107.595 Az status=0008 Ze status=0009 15:17:03 Check angles 15:17:03 SkyScan query 15:17:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.97<-20598 Statuses=0008 0009 15:17:03 Msec=3750 True Az=112.995 Ze=-128.97 Az status=0008 Ze status=0009 15:17:03 Check angles 15:17:03 SkyScan query 15:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.925<-21995 Statuses=0008 0009 15:17:04 Msec=4500 True Az=112.995 Ze=-149.925 Az status=0008 Ze status=0009 15:17:04 Check angles 15:17:04 SkyScan query 15:17:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.82<-23388 Statuses=0008 0009 15:17:05 Msec=5250 True Az=112.995 Ze=-170.82 Az status=0008 Ze status=0009 15:17:05 Check angles 15:17:05 SkyScan query 15:17:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:17:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:17:05 Message to Master queued w/err=0: serial=92059 error=0 15:17:10 Received message from Master: op=Filter serial=92060 15:17:10 Color wheel filter change from 0 to 0 15:17:10 FLIGetFilterPos err=0 currentPosition=0 15:17:10 FLIGetStepsRemaining err=0 RemainingSteps=0 15:17:10 Filter is already there-color wheel unchanged 15:17:11 Received message from Master: op=Shutter serial=92061 15:17:11 Shutter LASER open 15:17:11 Received message from Camera: op=State serial=92063 15:17:11 GetSingleValue result=40 Value=cccccccc 15:17:11 SkyScan query 15:17:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:17:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:11 Parameters OK 15:17:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:11 Set A/D data flow result=40 15:17:11 Set A/D channel type result=40 15:17:11 Set A/D encoding result=40 15:17:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:11 Set channel filter=0.000000e+000 result=40 15:17:11 Config A/D Result=40 15:17:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:11 Get A/D filter: -9.255963e+061 result=40 15:17:11 Get A/D value=-858993460 result=40 15:17:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:11 Parameters OK 15:17:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:11 Set A/D data flow result=40 15:17:11 Set A/D channel type result=40 15:17:11 Set A/D encoding result=40 15:17:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:11 Set channel filter=0.000000e+000 result=40 15:17:11 Config A/D Result=40 15:17:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:11 Get A/D filter: -9.255963e+061 result=40 15:17:11 Get A/D value=-858993460 result=40 15:17:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:17:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:17:11 Aux= 15:17:11 Message to Camera, serial 92063 queued 15:17:20 Received message from Master: op=Shutter serial=92073 15:17:20 Shutter LASER close 15:17:20 Received message from Master: op=PointingHead serial=92077 15:17:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:17:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:17:21 Point started: ret=0 15:17:21 point_skyscan result=0 15:17:21 Check angles 15:17:21 SkyScan query 15:17:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 15:17:22 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 15:17:22 Check angles 15:17:22 SkyScan query 15:17:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 15:17:23 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 15:17:23 Check angles 15:17:23 SkyScan query 15:17:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.62<-18708 Statuses=0008 0009 15:17:23 Msec=1500 True Az=112.995 Ze=-100.62 Az status=0008 Ze status=0009 15:17:24 Check angles 15:17:24 SkyScan query 15:17:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.665<-17311 Statuses=0008 0009 15:17:24 Msec=2250 True Az=112.995 Ze=-79.665 Az status=0008 Ze status=0009 15:17:24 Check angles 15:17:24 SkyScan query 15:17:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 15:17:25 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 15:17:25 Check angles 15:17:25 SkyScan query 15:17:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 15:17:26 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 15:17:26 Check angles 15:17:26 SkyScan query 15:17:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 15:17:26 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 15:17:27 Check angles 15:17:27 SkyScan query 15:17:27 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 15:17:27 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 15:17:27 Check angles 15:17:27 SkyScan query 15:17:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:17:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:17:28 Message to Master queued w/err=0: serial=92077 error=0 15:17:33 Received message from Master: op=Filter serial=92078 15:17:33 Color wheel filter change from 0 to 0 15:17:33 FLIGetFilterPos err=0 currentPosition=0 15:17:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:17:33 Filter is already there-color wheel unchanged 15:17:33 Received message from Master: op=Shutter serial=92079 15:17:33 Shutter LASER close 15:17:33 Received message from Camera: op=State serial=92081 15:17:33 GetSingleValue result=40 Value=cccccccc 15:17:33 SkyScan query 15:17:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:17:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:34 Parameters OK 15:17:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:34 Set A/D data flow result=40 15:17:34 Set A/D channel type result=40 15:17:34 Set A/D encoding result=40 15:17:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:34 Set channel filter=0.000000e+000 result=40 15:17:34 Config A/D Result=40 15:17:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:34 Get A/D filter: -9.255963e+061 result=40 15:17:34 Get A/D value=-858993460 result=40 15:17:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:34 Parameters OK 15:17:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:34 Set A/D data flow result=40 15:17:34 Set A/D channel type result=40 15:17:34 Set A/D encoding result=40 15:17:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:34 Set channel filter=0.000000e+000 result=40 15:17:34 Config A/D Result=40 15:17:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:34 Get A/D filter: -9.255963e+061 result=40 15:17:34 Get A/D value=-858993460 result=40 15:17:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:17:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:17:34 Aux= 15:17:34 Message to Camera, serial 92081 queued 15:18:11 Received message from Master: op=PointingHead serial=92094 15:18:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:18:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:18:11 Point started: ret=0 15:18:11 point_skyscan result=0 15:18:12 Check angles 15:18:12 SkyScan query 15:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:18:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:18:12 Message to Master queued w/err=0: serial=92094 error=0 15:18:17 Received message from Master: op=Filter serial=92095 15:18:17 Color wheel filter change from 0 to 0 15:18:17 FLIGetFilterPos err=0 currentPosition=0 15:18:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:17 Filter is already there-color wheel unchanged 15:18:18 Received message from Master: op=Shutter serial=92096 15:18:18 Shutter LASER close 15:18:18 Received message from Camera: op=State serial=92098 15:18:18 GetSingleValue result=40 Value=cccccccc 15:18:18 SkyScan query 15:18:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:18:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:18 Parameters OK 15:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:18 Set A/D data flow result=40 15:18:18 Set A/D channel type result=40 15:18:18 Set A/D encoding result=40 15:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:18 Set channel filter=0.000000e+000 result=40 15:18:18 Config A/D Result=40 15:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:18 Get A/D filter: -9.255963e+061 result=40 15:18:18 Get A/D value=-858993460 result=40 15:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:18 Parameters OK 15:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:18 Set A/D data flow result=40 15:18:18 Set A/D channel type result=40 15:18:18 Set A/D encoding result=40 15:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:18 Set channel filter=0.000000e+000 result=40 15:18:18 Config A/D Result=40 15:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:18 Get A/D filter: -9.255963e+061 result=40 15:18:18 Get A/D value=-858993460 result=40 15:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:18 Aux= 15:18:18 Message to Camera, serial 92098 queued 15:18:55 Received message from Master: op=PointingHead serial=92111 15:18:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:18:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:18:55 Point started: ret=0 15:18:55 point_skyscan result=0 15:18:56 Check angles 15:18:56 SkyScan query 15:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:18:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:18:57 Message to Master queued w/err=0: serial=92111 error=0 15:19:02 Received message from Master: op=Filter serial=92112 15:19:02 Color wheel filter change from 0 to 0 15:19:02 FLIGetFilterPos err=0 currentPosition=0 15:19:02 FLIGetStepsRemaining err=0 RemainingSteps=0 15:19:02 Filter is already there-color wheel unchanged 15:19:02 Received message from Master: op=Shutter serial=92113 15:19:02 Shutter LASER close 15:19:02 Received message from Camera: op=State serial=92115 15:19:02 GetSingleValue result=40 Value=cccccccc 15:19:02 SkyScan query 15:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:19:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:02 Parameters OK 15:19:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:02 Set A/D data flow result=40 15:19:02 Set A/D channel type result=40 15:19:02 Set A/D encoding result=40 15:19:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:02 Set channel filter=0.000000e+000 result=40 15:19:02 Config A/D Result=40 15:19:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:02 Get A/D filter: -9.255963e+061 result=40 15:19:02 Get A/D value=-858993460 result=40 15:19:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:02 Parameters OK 15:19:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:02 Set A/D data flow result=40 15:19:02 Set A/D channel type result=40 15:19:02 Set A/D encoding result=40 15:19:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:02 Set channel filter=0.000000e+000 result=40 15:19:02 Config A/D Result=40 15:19:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:02 Get A/D filter: -9.255963e+061 result=40 15:19:02 Get A/D value=-858993460 result=40 15:19:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:19:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:19:02 Aux= 15:19:02 Message to Camera, serial 92115 queued 15:19:39 Received message from Master: op=PointingHead serial=92128 15:19:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:19:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:19:40 Point started: ret=0 15:19:40 point_skyscan result=0 15:19:40 Check angles 15:19:40 SkyScan query 15:19:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:19:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:19:41 Message to Master queued w/err=0: serial=92128 error=0 15:19:46 Received message from Master: op=Filter serial=92129 15:19:46 Color wheel filter change from 0 to 0 15:19:46 FLIGetFilterPos err=0 currentPosition=0 15:19:46 FLIGetStepsRemaining err=0 RemainingSteps=0 15:19:46 Filter is already there-color wheel unchanged 15:19:46 Received message from Master: op=Shutter serial=92130 15:19:46 Shutter LASER close 15:19:46 Received message from Camera: op=State serial=92132 15:19:46 GetSingleValue result=40 Value=cccccccc 15:19:46 SkyScan query 15:19:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:19:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:47 Parameters OK 15:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:47 Set A/D data flow result=40 15:19:47 Set A/D channel type result=40 15:19:47 Set A/D encoding result=40 15:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:47 Set channel filter=0.000000e+000 result=40 15:19:47 Config A/D Result=40 15:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:47 Get A/D filter: -9.255963e+061 result=40 15:19:47 Get A/D value=-858993460 result=40 15:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:47 Parameters OK 15:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:47 Set A/D data flow result=40 15:19:47 Set A/D channel type result=40 15:19:47 Set A/D encoding result=40 15:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:47 Set channel filter=0.000000e+000 result=40 15:19:47 Config A/D Result=40 15:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:47 Get A/D filter: -9.255963e+061 result=40 15:19:47 Get A/D value=-858993460 result=40 15:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:19:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:19:47 Aux= 15:19:47 Message to Camera, serial 92132 queued 15:20:24 Received message from Master: op=PointingHead serial=92145 15:20:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:20:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:20:24 Point started: ret=0 15:20:24 point_skyscan result=0 15:20:25 Check angles 15:20:25 SkyScan query 15:20:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 15:20:25 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 15:20:25 Check angles 15:20:25 SkyScan query 15:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 15:20:26 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 15:20:26 Check angles 15:20:26 SkyScan query 15:20:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 15:20:27 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 15:20:27 Check angles 15:20:27 SkyScan query 15:20:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 15:20:28 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 15:20:28 Check angles 15:20:28 SkyScan query 15:20:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.49<-19166 Statuses=0008 0009 15:20:28 Msec=3000 True Az=112.995 Ze=-107.49 Az status=0008 Ze status=0009 15:20:28 Check angles 15:20:28 SkyScan query 15:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.85<-20590 Statuses=0008 0009 15:20:29 Msec=3750 True Az=112.995 Ze=-128.85 Az status=0008 Ze status=0009 15:20:29 Check angles 15:20:29 SkyScan query 15:20:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.82<-21988 Statuses=0008 0009 15:20:30 Msec=4500 True Az=112.995 Ze=-149.82 Az status=0008 Ze status=0009 15:20:30 Check angles 15:20:30 SkyScan query 15:20:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.715<-23381 Statuses=0008 0009 15:20:31 Msec=5250 True Az=112.995 Ze=-170.715 Az status=0008 Ze status=0009 15:20:31 Check angles 15:20:31 SkyScan query 15:20:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:20:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:20:31 Message to Master queued w/err=0: serial=92145 error=0 15:20:36 Received message from Master: op=Filter serial=92146 15:20:36 Color wheel filter change from 0 to 0 15:20:36 FLIGetFilterPos err=0 currentPosition=0 15:20:36 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:36 Filter is already there-color wheel unchanged 15:20:36 Received message from Master: op=Shutter serial=92147 15:20:36 Shutter LASER open 15:20:37 Received message from Camera: op=State serial=92149 15:20:37 GetSingleValue result=40 Value=cccccccc 15:20:37 SkyScan query 15:20:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:20:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:37 Parameters OK 15:20:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:37 Set A/D data flow result=40 15:20:37 Set A/D channel type result=40 15:20:37 Set A/D encoding result=40 15:20:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:37 Set channel filter=0.000000e+000 result=40 15:20:37 Config A/D Result=40 15:20:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:37 Get A/D filter: -9.255963e+061 result=40 15:20:37 Get A/D value=-858993460 result=40 15:20:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:37 Parameters OK 15:20:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:37 Set A/D data flow result=40 15:20:37 Set A/D channel type result=40 15:20:37 Set A/D encoding result=40 15:20:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:37 Set channel filter=0.000000e+000 result=40 15:20:37 Config A/D Result=40 15:20:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:37 Get A/D filter: -9.255963e+061 result=40 15:20:37 Get A/D value=-858993460 result=40 15:20:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:37 Aux= 15:20:37 Message to Camera, serial 92149 queued 15:20:46 Received message from Master: op=Shutter serial=92159 15:20:46 Shutter LASER close 15:20:46 Received message from Master: op=PointingHead serial=92163 15:20:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:20:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:20:47 Point started: ret=0 15:20:47 point_skyscan result=0 15:20:47 Check angles 15:20:47 SkyScan query 15:20:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 15:20:48 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 15:20:48 Check angles 15:20:48 SkyScan query 15:20:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 15:20:49 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 15:20:49 Check angles 15:20:49 SkyScan query 15:20:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.535<-18769 Statuses=0008 0009 15:20:49 Msec=1500 True Az=112.995 Ze=-101.535 Az status=0008 Ze status=0009 15:20:50 Check angles 15:20:50 SkyScan query 15:20:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.55<-17370 Statuses=0008 0009 15:20:50 Msec=2250 True Az=112.995 Ze=-80.55 Az status=0008 Ze status=0009 15:20:50 Check angles 15:20:50 SkyScan query 15:20:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 15:20:51 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 15:20:51 Check angles 15:20:51 SkyScan query 15:20:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 15:20:52 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 15:20:52 Check angles 15:20:52 SkyScan query 15:20:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.295<-13153 Statuses=0008 0009 15:20:52 Msec=4500 True Az=112.995 Ze=-17.295 Az status=0008 Ze status=0009 15:20:53 Check angles 15:20:53 SkyScan query 15:20:53 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 15:20:53 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 15:20:53 Check angles 15:20:53 SkyScan query 15:20:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:20:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:20:54 Message to Master queued w/err=0: serial=92163 error=0 15:20:59 Received message from Master: op=Filter serial=92164 15:20:59 Color wheel filter change from 0 to 0 15:20:59 FLIGetFilterPos err=0 currentPosition=0 15:20:59 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:59 Filter is already there-color wheel unchanged 15:20:59 Received message from Master: op=Shutter serial=92165 15:20:59 Shutter LASER close 15:20:59 Received message from Camera: op=State serial=92167 15:20:59 GetSingleValue result=40 Value=cccccccc 15:20:59 SkyScan query 15:21:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:21:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:00 Parameters OK 15:21:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:00 Set A/D data flow result=40 15:21:00 Set A/D channel type result=40 15:21:00 Set A/D encoding result=40 15:21:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:00 Set channel filter=0.000000e+000 result=40 15:21:00 Config A/D Result=40 15:21:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:00 Get A/D filter: -9.255963e+061 result=40 15:21:00 Get A/D value=-858993460 result=40 15:21:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:00 Parameters OK 15:21:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:00 Set A/D data flow result=40 15:21:00 Set A/D channel type result=40 15:21:00 Set A/D encoding result=40 15:21:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:00 Set channel filter=0.000000e+000 result=40 15:21:00 Config A/D Result=40 15:21:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:00 Get A/D filter: -9.255963e+061 result=40 15:21:00 Get A/D value=-858993460 result=40 15:21:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:00 Aux= 15:21:00 Message to Camera, serial 92167 queued 15:21:37 Received message from Master: op=PointingHead serial=92180 15:21:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:21:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:21:37 Point started: ret=0 15:21:37 point_skyscan result=0 15:21:38 Check angles 15:21:38 SkyScan query 15:21:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:21:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:21:38 Message to Master queued w/err=0: serial=92180 error=0 15:21:43 Received message from Master: op=Filter serial=92181 15:21:43 Color wheel filter change from 0 to 0 15:21:43 FLIGetFilterPos err=0 currentPosition=0 15:21:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:43 Filter is already there-color wheel unchanged 15:21:44 Received message from Master: op=Shutter serial=92182 15:21:44 Shutter LASER close 15:21:44 Received message from Camera: op=State serial=92184 15:21:44 GetSingleValue result=40 Value=cccccccc 15:21:44 SkyScan query 15:21:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:21:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:44 Parameters OK 15:21:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:44 Set A/D data flow result=40 15:21:44 Set A/D channel type result=40 15:21:44 Set A/D encoding result=40 15:21:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:44 Set channel filter=0.000000e+000 result=40 15:21:44 Config A/D Result=40 15:21:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:44 Get A/D filter: -9.255963e+061 result=40 15:21:44 Get A/D value=-858993460 result=40 15:21:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:44 Parameters OK 15:21:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:44 Set A/D data flow result=40 15:21:44 Set A/D channel type result=40 15:21:44 Set A/D encoding result=40 15:21:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:44 Set channel filter=0.000000e+000 result=40 15:21:44 Config A/D Result=40 15:21:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:44 Get A/D filter: -9.255963e+061 result=40 15:21:44 Get A/D value=-858993460 result=40 15:21:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:44 Aux= 15:21:44 Message to Camera, serial 92184 queued 15:22:21 Received message from Master: op=PointingHead serial=92197 15:22:21 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:22:21 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:22:21 Point started: ret=0 15:22:21 point_skyscan result=0 15:22:22 Check angles 15:22:22 SkyScan query 15:22:23 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 15:22:23 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 15:22:23 Check angles 15:22:23 SkyScan query 15:22:24 SkyScan query done: ret=0 az=153.615<-10241 ze=-6.495<-12433 Statuses=0009 0008 15:22:24 Msec=750 True Az=153.615 Ze=-6.495 Az status=0009 Ze status=0008 15:22:24 Check angles 15:22:24 SkyScan query 15:22:24 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.495<-12433 Statuses=0009 0008 15:22:24 Msec=1500 True Az=171.15 Ze=-6.495 Az status=0009 Ze status=0008 15:22:24 Check angles 15:22:24 SkyScan query 15:22:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:22:25 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:22:25 Message to Master queued w/err=0: serial=92197 error=0 15:22:30 Received message from Master: op=Filter serial=92198 15:22:30 Color wheel filter change from 0 to 0 15:22:30 FLIGetFilterPos err=0 currentPosition=0 15:22:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:30 Filter is already there-color wheel unchanged 15:22:30 Received message from Master: op=Shutter serial=92199 15:22:30 Shutter LASER close 15:22:30 Received message from Camera: op=State serial=92201 15:22:30 GetSingleValue result=40 Value=cccccccc 15:22:30 SkyScan query 15:22:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:22:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:31 Parameters OK 15:22:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:31 Set A/D data flow result=40 15:22:31 Set A/D channel type result=40 15:22:31 Set A/D encoding result=40 15:22:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:31 Set channel filter=0.000000e+000 result=40 15:22:31 Config A/D Result=40 15:22:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:31 Get A/D filter: -9.255963e+061 result=40 15:22:31 Get A/D value=-858993460 result=40 15:22:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:31 Parameters OK 15:22:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:31 Set A/D data flow result=40 15:22:31 Set A/D channel type result=40 15:22:31 Set A/D encoding result=40 15:22:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:31 Set channel filter=0.000000e+000 result=40 15:22:31 Config A/D Result=40 15:22:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:31 Get A/D filter: -9.255963e+061 result=40 15:22:31 Get A/D value=-858993460 result=40 15:22:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:31 Aux= 15:22:31 Message to Camera, serial 92201 queued 15:23:08 Received message from Master: op=PointingHead serial=92214 15:23:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:23:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:23:08 Point started: ret=0 15:23:08 point_skyscan result=0 15:23:09 Check angles 15:23:09 SkyScan query 15:23:09 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 15:23:09 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 15:23:10 Check angles 15:23:10 SkyScan query 15:23:10 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 15:23:10 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 15:23:10 Check angles 15:23:10 SkyScan query 15:23:11 SkyScan query done: ret=0 az=117.255<-7817 ze=6.495<-11567 Statuses=0009 0008 15:23:11 Msec=1500 True Az=117.255 Ze=6.495 Az status=0009 Ze status=0008 15:23:11 Check angles 15:23:11 SkyScan query 15:23:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:23:12 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:23:12 Message to Master queued w/err=0: serial=92214 error=0 15:23:17 Received message from Master: op=Filter serial=92215 15:23:17 Color wheel filter change from 0 to 0 15:23:17 FLIGetFilterPos err=0 currentPosition=0 15:23:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:17 Filter is already there-color wheel unchanged 15:23:17 Received message from Master: op=Shutter serial=92216 15:23:17 Shutter LASER close 15:23:17 Received message from Camera: op=State serial=92218 15:23:17 GetSingleValue result=40 Value=cccccccc 15:23:17 SkyScan query 15:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:23:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:17 Parameters OK 15:23:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:17 Set A/D data flow result=40 15:23:17 Set A/D channel type result=40 15:23:17 Set A/D encoding result=40 15:23:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:17 Set channel filter=0.000000e+000 result=40 15:23:17 Config A/D Result=40 15:23:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:17 Get A/D filter: -9.255963e+061 result=40 15:23:17 Get A/D value=-858993460 result=40 15:23:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:17 Parameters OK 15:23:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:17 Set A/D data flow result=40 15:23:17 Set A/D channel type result=40 15:23:17 Set A/D encoding result=40 15:23:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:17 Set channel filter=0.000000e+000 result=40 15:23:17 Config A/D Result=40 15:23:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:17 Get A/D filter: -9.255963e+061 result=40 15:23:17 Get A/D value=-858993460 result=40 15:23:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:17 Aux= 15:23:17 Message to Camera, serial 92218 queued [UTC 2019-3-3 15:23:50] 15:23:53 Received message from Master: op=PointingHead serial=92230 15:23:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:23:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:23:54 Point started: ret=0 15:23:54 point_skyscan result=0 15:23:54 Check angles 15:23:54 SkyScan query 15:23:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 15:23:55 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 15:23:55 Check angles 15:23:55 SkyScan query 15:23:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 15:23:56 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 15:23:56 Check angles 15:23:56 SkyScan query 15:23:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.655<-16377 Statuses=0008 0009 15:23:57 Msec=1500 True Az=112.995 Ze=-65.655 Az status=0008 Ze status=0009 15:23:57 Check angles 15:23:57 SkyScan query 15:23:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 15:23:57 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 15:23:57 Check angles 15:23:57 SkyScan query 15:23:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.55<-19170 Statuses=0008 0009 15:23:58 Msec=3000 True Az=112.995 Ze=-107.55 Az status=0008 Ze status=0009 15:23:58 Check angles 15:23:58 SkyScan query 15:23:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.925<-20595 Statuses=0008 0009 15:23:59 Msec=3750 True Az=112.995 Ze=-128.925 Az status=0008 Ze status=0009 15:23:59 Check angles 15:23:59 SkyScan query 15:24:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.895<-21993 Statuses=0008 0009 15:24:00 Msec=4500 True Az=112.995 Ze=-149.895 Az status=0008 Ze status=0009 15:24:00 Check angles 15:24:00 SkyScan query 15:24:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 15:24:00 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 15:24:00 Check angles 15:24:00 SkyScan query 15:24:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:24:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:24:01 Message to Master queued w/err=0: serial=92230 error=0 15:24:06 Received message from Master: op=Filter serial=92231 15:24:06 Color wheel filter change from 0 to 0 15:24:06 FLIGetFilterPos err=0 currentPosition=0 15:24:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:24:06 Filter is already there-color wheel unchanged 15:24:06 Received message from Master: op=Shutter serial=92232 15:24:06 Shutter LASER open 15:24:06 Received message from Camera: op=State serial=92234 15:24:06 GetSingleValue result=40 Value=cccccccc 15:24:06 SkyScan query 15:24:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:24:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:07 Parameters OK 15:24:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:07 Set A/D data flow result=40 15:24:07 Set A/D channel type result=40 15:24:07 Set A/D encoding result=40 15:24:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:07 Set channel filter=0.000000e+000 result=40 15:24:07 Config A/D Result=40 15:24:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:07 Get A/D filter: -9.255963e+061 result=40 15:24:07 Get A/D value=-858993460 result=40 15:24:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:07 Parameters OK 15:24:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:07 Set A/D data flow result=40 15:24:07 Set A/D channel type result=40 15:24:07 Set A/D encoding result=40 15:24:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:07 Set channel filter=0.000000e+000 result=40 15:24:07 Config A/D Result=40 15:24:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:07 Get A/D filter: -9.255963e+061 result=40 15:24:07 Get A/D value=-858993460 result=40 15:24:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:24:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:24:07 Aux= 15:24:07 Message to Camera, serial 92234 queued 15:24:15 Received message from Master: op=Shutter serial=92244 15:24:15 Shutter LASER close 15:24:16 Received message from Master: op=PointingHead serial=92248 15:24:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:24:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:24:16 Point started: ret=0 15:24:16 point_skyscan result=0 15:24:17 Check angles 15:24:17 SkyScan query 15:24:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 15:24:18 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 15:24:18 Check angles 15:24:18 SkyScan query 15:24:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 15:24:18 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 15:24:18 Check angles 15:24:18 SkyScan query 15:24:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 15:24:19 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 15:24:19 Check angles 15:24:19 SkyScan query 15:24:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 15:24:20 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 15:24:20 Check angles 15:24:20 SkyScan query 15:24:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 15:24:21 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 15:24:21 Check angles 15:24:21 SkyScan query 15:24:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.115<-14541 Statuses=0008 0009 15:24:21 Msec=3750 True Az=112.995 Ze=-38.115 Az status=0008 Ze status=0009 15:24:21 Check angles 15:24:21 SkyScan query 15:24:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.74<-13116 Statuses=0008 0009 15:24:22 Msec=4500 True Az=112.995 Ze=-16.74 Az status=0008 Ze status=0009 15:24:22 Check angles 15:24:22 SkyScan query 15:24:23 SkyScan query done: ret=0 az=112.995<-7533 ze=4.185<-11721 Statuses=0008 0009 15:24:23 Msec=5250 True Az=112.995 Ze=4.185 Az status=0008 Ze status=0009 15:24:23 Check angles 15:24:23 SkyScan query 15:24:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:24:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:24:24 Message to Master queued w/err=0: serial=92248 error=0 15:24:29 Received message from Master: op=Filter serial=92249 15:24:29 Color wheel filter change from 0 to 0 15:24:29 FLIGetFilterPos err=0 currentPosition=0 15:24:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:24:29 Filter is already there-color wheel unchanged 15:24:29 Received message from Master: op=Shutter serial=92250 15:24:29 Shutter LASER close 15:24:29 Received message from Camera: op=State serial=92252 15:24:29 GetSingleValue result=40 Value=cccccccc 15:24:29 SkyScan query 15:24:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:24:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:29 Parameters OK 15:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:29 Set A/D data flow result=40 15:24:29 Set A/D channel type result=40 15:24:29 Set A/D encoding result=40 15:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:29 Set channel filter=0.000000e+000 result=40 15:24:29 Config A/D Result=40 15:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:29 Get A/D filter: -9.255963e+061 result=40 15:24:29 Get A/D value=-858993460 result=40 15:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:29 Parameters OK 15:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:29 Set A/D data flow result=40 15:24:29 Set A/D channel type result=40 15:24:29 Set A/D encoding result=40 15:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:29 Set channel filter=0.000000e+000 result=40 15:24:29 Config A/D Result=40 15:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:29 Get A/D filter: -9.255963e+061 result=40 15:24:29 Get A/D value=-858993460 result=40 15:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:24:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:24:29 Aux= 15:24:29 Message to Camera, serial 92252 queued 15:25:06 Received message from Master: op=PointingHead serial=92265 15:25:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:25:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:25:07 Point started: ret=0 15:25:07 point_skyscan result=0 15:25:07 Check angles 15:25:07 SkyScan query 15:25:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:25:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:25:08 Message to Master queued w/err=0: serial=92265 error=0 15:25:13 Received message from Master: op=Filter serial=92266 15:25:13 Color wheel filter change from 0 to 0 15:25:13 FLIGetFilterPos err=0 currentPosition=0 15:25:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:25:13 Filter is already there-color wheel unchanged 15:25:13 Received message from Master: op=Shutter serial=92267 15:25:13 Shutter LASER close 15:25:13 Received message from Camera: op=State serial=92269 15:25:13 GetSingleValue result=40 Value=cccccccc 15:25:13 SkyScan query 15:25:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:25:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:14 Parameters OK 15:25:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:14 Set A/D data flow result=40 15:25:14 Set A/D channel type result=40 15:25:14 Set A/D encoding result=40 15:25:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:14 Set channel filter=0.000000e+000 result=40 15:25:14 Config A/D Result=40 15:25:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:14 Get A/D filter: -9.255963e+061 result=40 15:25:14 Get A/D value=-858993460 result=40 15:25:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:14 Parameters OK 15:25:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:14 Set A/D data flow result=40 15:25:14 Set A/D channel type result=40 15:25:14 Set A/D encoding result=40 15:25:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:14 Set channel filter=0.000000e+000 result=40 15:25:14 Config A/D Result=40 15:25:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:14 Get A/D filter: -9.255963e+061 result=40 15:25:14 Get A/D value=-858993460 result=40 15:25:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:25:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:25:14 Aux= 15:25:14 Message to Camera, serial 92269 queued 15:25:50 Received message from Master: op=PointingHead serial=92281 15:25:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:25:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:25:50 Point started: ret=0 15:25:50 point_skyscan result=0 15:25:51 Check angles 15:25:51 SkyScan query 15:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 15:25:52 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 15:25:52 Check angles 15:25:52 SkyScan query 15:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 15:25:53 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 15:25:53 Check angles 15:25:53 SkyScan query 15:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 15:25:53 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 15:25:53 Check angles 15:25:53 SkyScan query 15:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.905<-17727 Statuses=0008 0009 15:25:54 Msec=2250 True Az=112.995 Ze=-85.905 Az status=0008 Ze status=0009 15:25:54 Check angles 15:25:54 SkyScan query 15:25:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.845<-19123 Statuses=0008 0009 15:25:55 Msec=3000 True Az=112.995 Ze=-106.845 Az status=0008 Ze status=0009 15:25:55 Check angles 15:25:55 SkyScan query 15:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.815<-20521 Statuses=0008 0009 15:25:56 Msec=3750 True Az=112.995 Ze=-127.815 Az status=0008 Ze status=0009 15:25:56 Check angles 15:25:56 SkyScan query 15:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.755<-21917 Statuses=0008 0009 15:25:56 Msec=4500 True Az=112.995 Ze=-148.755 Az status=0008 Ze status=0009 15:25:56 Check angles 15:25:56 SkyScan query 15:25:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.71<-23314 Statuses=0008 0009 15:25:57 Msec=5250 True Az=112.995 Ze=-169.71 Az status=0008 Ze status=0009 15:25:57 Check angles 15:25:57 SkyScan query 15:25:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:25:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:25:58 Message to Master queued w/err=0: serial=92281 error=0 15:26:03 Received message from Master: op=Filter serial=92282 15:26:03 Color wheel filter change from 0 to 2 15:26:03 FLIGetFilterPos err=0 currentPosition=0 15:26:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:26:06 FLISetFilterPos err=0 rqPosition=2 15:26:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:26:06 Check after 0.00 sec for filter wheel DIn/CWh=0 15:26:06 FLIGetFilterPos err=0 currentPosition=2 15:26:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:26:06 Received message from Master: op=Shutter serial=92283 15:26:06 Shutter LASER close 15:26:06 Received message from Camera: op=State serial=92285 15:26:06 GetSingleValue result=40 Value=cccccccc 15:26:06 SkyScan query 15:26:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:26:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:07 Parameters OK 15:26:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:07 Set A/D data flow result=40 15:26:07 Set A/D channel type result=40 15:26:07 Set A/D encoding result=40 15:26:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:07 Set channel filter=0.000000e+000 result=40 15:26:07 Config A/D Result=40 15:26:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:07 Get A/D filter: -9.255963e+061 result=40 15:26:07 Get A/D value=-858993460 result=40 15:26:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:07 Parameters OK 15:26:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:07 Set A/D data flow result=40 15:26:07 Set A/D channel type result=40 15:26:07 Set A/D encoding result=40 15:26:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:07 Set channel filter=0.000000e+000 result=40 15:26:07 Config A/D Result=40 15:26:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:07 Get A/D filter: -9.255963e+061 result=40 15:26:07 Get A/D value=-858993460 result=40 15:26:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:26:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:26:07 Aux= 15:26:07 Message to Camera, serial 92285 queued 15:26:13 Received message from Master: op=PointingHead serial=92296 15:26:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:26:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:26:13 Point started: ret=0 15:26:13 point_skyscan result=0 15:26:14 Check angles 15:26:14 SkyScan query 15:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:26:14 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 15:26:14 Message to Master queued w/err=0: serial=92296 error=0 15:26:19 Received message from Master: op=Filter serial=92297 15:26:19 Color wheel filter change from 2 to 2 15:26:19 FLIGetFilterPos err=0 currentPosition=2 15:26:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:26:19 Filter is already there-color wheel unchanged 15:26:20 Received message from Master: op=Shutter serial=92298 15:26:20 Shutter LASER close 15:26:20 Received message from Camera: op=State serial=92300 15:26:20 GetSingleValue result=40 Value=cccccccc 15:26:20 SkyScan query 15:26:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:26:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:20 Parameters OK 15:26:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:20 Set A/D data flow result=40 15:26:20 Set A/D channel type result=40 15:26:20 Set A/D encoding result=40 15:26:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:20 Set channel filter=0.000000e+000 result=40 15:26:20 Config A/D Result=40 15:26:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:20 Get A/D filter: -9.255963e+061 result=40 15:26:20 Get A/D value=-858993460 result=40 15:26:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:20 Parameters OK 15:26:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:20 Set A/D data flow result=40 15:26:20 Set A/D channel type result=40 15:26:20 Set A/D encoding result=40 15:26:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:20 Set channel filter=0.000000e+000 result=40 15:26:20 Config A/D Result=40 15:26:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:20 Get A/D filter: -9.255963e+061 result=40 15:26:20 Get A/D value=-858993460 result=40 15:26:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:26:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:26:20 Aux= 15:26:20 Message to Camera, serial 92300 queued 15:26:56 Received message from Master: op=PointingHead serial=92312 15:26:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:26:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:26:56 Point started: ret=0 15:26:56 point_skyscan result=0 15:26:57 Check angles 15:26:57 SkyScan query 15:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:26:58 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 15:26:58 Message to Master queued w/err=0: serial=92312 error=0 15:27:03 Received message from Master: op=Filter serial=92313 15:27:03 Color wheel filter change from 2 to 2 15:27:03 FLIGetFilterPos err=0 currentPosition=2 15:27:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:03 Filter is already there-color wheel unchanged 15:27:03 Received message from Master: op=Shutter serial=92314 15:27:03 Shutter LASER close 15:27:03 Received message from Camera: op=State serial=92316 15:27:03 GetSingleValue result=40 Value=cccccccc 15:27:03 SkyScan query 15:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:27:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:04 Parameters OK 15:27:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:04 Set A/D data flow result=40 15:27:04 Set A/D channel type result=40 15:27:04 Set A/D encoding result=40 15:27:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:04 Set channel filter=0.000000e+000 result=40 15:27:04 Config A/D Result=40 15:27:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:04 Get A/D filter: -9.255963e+061 result=40 15:27:04 Get A/D value=-858993460 result=40 15:27:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:04 Parameters OK 15:27:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:04 Set A/D data flow result=40 15:27:04 Set A/D channel type result=40 15:27:04 Set A/D encoding result=40 15:27:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:04 Set channel filter=0.000000e+000 result=40 15:27:04 Config A/D Result=40 15:27:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:04 Get A/D filter: -9.255963e+061 result=40 15:27:04 Get A/D value=-858993460 result=40 15:27:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:04 Aux= 15:27:04 Message to Camera, serial 92316 queued 15:27:12 Received message from Master: op=Log close serial=92330 15:27:12 Log file close 15:27:12 * END OF LOG *