[UTC 2019-2-28 15:36:34] 15:36:35 Received message from Master: op=Log open serial=37499 15:36:35 Log file open: Observatory C:\PKZPrograms\Logs\20190227 \ PKZ20190228153635_Observatory.txt 15:36:35 Previous log file: 15:36:39 Received message from Master: op=Log directory change serial=37501 15:36:39 Log file directory changed from C:\PKZPrograms\Logs\20190227 to C:\PKZPrograms\Logs\20190228 15:36:39 Log file name is PKZ20190228153639_Observatory.txt [UTC 2019-2-28 15:43:50] 15:46:39 No messages received for 10 min. 4572 sent since last one of these. 15:46:39 MsgArea H: nextMessageSerial=37509 startMsgs=68 nextFree=45084 maxMsg=65468 15:46:39 MsgArea Q: Master=-1:-1 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 15:46:39 MsgArea S: 15:56:39 No messages received for 10 min. 0 sent since last one of these. 15:56:39 MsgArea H: nextMessageSerial=37509 startMsgs=68 nextFree=45084 maxMsg=65468 15:56:39 MsgArea Q: Master=-1:-1 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 15:56:39 MsgArea S: 16:03:38 Received message from Master: op=Identify serial=37509 [UTC 2019-2-28 16:03:50] 16:13:38 No messages received for 10 min. 1 sent since last one of these. 16:13:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 16:13:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:13:38 MsgArea S: 16:23:38 No messages received for 10 min. 0 sent since last one of these. 16:23:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 16:23:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:23:38 MsgArea S: [UTC 2019-2-28 16:23:50] 16:33:38 No messages received for 10 min. 0 sent since last one of these. 16:33:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 16:33:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:33:38 MsgArea S: 16:43:38 No messages received for 10 min. 0 sent since last one of these. 16:43:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 16:43:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:43:38 MsgArea S: [UTC 2019-2-28 16:43:50] 16:53:38 No messages received for 10 min. 0 sent since last one of these. 16:53:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 16:53:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:53:38 MsgArea S: 17:03:38 No messages received for 10 min. 0 sent since last one of these. 17:03:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 17:03:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:03:38 MsgArea S: [UTC 2019-2-28 17:03:50] 17:13:38 No messages received for 10 min. 0 sent since last one of these. 17:13:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 17:13:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:13:38 MsgArea S: 17:23:38 No messages received for 10 min. 0 sent since last one of these. 17:23:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 17:23:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:23:38 MsgArea S: [UTC 2019-2-28 17:23:50] 17:33:38 No messages received for 10 min. 0 sent since last one of these. 17:33:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 17:33:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:33:38 MsgArea S: 17:43:38 No messages received for 10 min. 0 sent since last one of these. 17:43:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 17:43:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:43:38 MsgArea S: [UTC 2019-2-28 17:43:50] 17:53:38 No messages received for 10 min. 0 sent since last one of these. 17:53:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 17:53:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:53:38 MsgArea S: 18:03:38 No messages received for 10 min. 0 sent since last one of these. 18:03:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 18:03:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:03:38 MsgArea S: [UTC 2019-2-28 18:03:50] 18:13:38 No messages received for 10 min. 0 sent since last one of these. 18:13:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 18:13:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:13:38 MsgArea S: 18:23:38 No messages received for 10 min. 0 sent since last one of these. 18:23:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 18:23:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:23:38 MsgArea S: [UTC 2019-2-28 18:23:50] 18:33:38 No messages received for 10 min. 0 sent since last one of these. 18:33:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 18:33:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:33:38 MsgArea S: 18:43:38 No messages received for 10 min. 0 sent since last one of these. 18:43:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 18:43:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:43:38 MsgArea S: [UTC 2019-2-28 18:43:50] 18:53:38 No messages received for 10 min. 0 sent since last one of these. 18:53:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 18:53:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:53:38 MsgArea S: 19:03:38 No messages received for 10 min. 0 sent since last one of these. 19:03:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 19:03:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:03:38 MsgArea S: [UTC 2019-2-28 19:03:50] 19:13:38 No messages received for 10 min. 0 sent since last one of these. 19:13:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 19:13:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:13:38 MsgArea S: 19:23:38 No messages received for 10 min. 0 sent since last one of these. 19:23:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 19:23:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:23:38 MsgArea S: [UTC 2019-2-28 19:23:50] 19:33:38 No messages received for 10 min. 0 sent since last one of these. 19:33:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 19:33:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:33:38 MsgArea S: 19:43:38 No messages received for 10 min. 0 sent since last one of these. 19:43:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 19:43:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:43:38 MsgArea S: [UTC 2019-2-28 19:43:50] 19:53:38 No messages received for 10 min. 0 sent since last one of these. 19:53:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 19:53:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:53:38 MsgArea S: 20:03:38 No messages received for 10 min. 0 sent since last one of these. 20:03:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 20:03:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:03:38 MsgArea S: [UTC 2019-2-28 20:03:50] 20:13:38 No messages received for 10 min. 0 sent since last one of these. 20:13:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 20:13:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:13:38 MsgArea S: 20:23:38 No messages received for 10 min. 0 sent since last one of these. 20:23:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 20:23:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:23:38 MsgArea S: [UTC 2019-2-28 20:23:50] 20:33:38 No messages received for 10 min. 0 sent since last one of these. 20:33:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 20:33:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:33:38 MsgArea S: 20:43:38 No messages received for 10 min. 0 sent since last one of these. 20:43:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 20:43:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:43:38 MsgArea S: [UTC 2019-2-28 20:43:50] 20:53:38 No messages received for 10 min. 0 sent since last one of these. 20:53:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 20:53:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:53:38 MsgArea S: 21:03:38 No messages received for 10 min. 0 sent since last one of these. 21:03:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 21:03:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:03:38 MsgArea S: [UTC 2019-2-28 21:03:50] 21:13:38 No messages received for 10 min. 0 sent since last one of these. 21:13:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 21:13:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:13:38 MsgArea S: 21:23:38 No messages received for 10 min. 0 sent since last one of these. 21:23:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 21:23:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:23:38 MsgArea S: [UTC 2019-2-28 21:23:50] 21:33:38 No messages received for 10 min. 0 sent since last one of these. 21:33:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 21:33:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:33:38 MsgArea S: 21:43:38 No messages received for 10 min. 0 sent since last one of these. 21:43:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 21:43:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:43:38 MsgArea S: [UTC 2019-2-28 21:43:50] 21:53:38 No messages received for 10 min. 0 sent since last one of these. 21:53:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 21:53:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:53:38 MsgArea S: 22:03:38 No messages received for 10 min. 0 sent since last one of these. 22:03:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 22:03:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:03:38 MsgArea S: [UTC 2019-2-28 22:03:50] 22:13:38 No messages received for 10 min. 0 sent since last one of these. 22:13:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 22:13:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:13:38 MsgArea S: 22:23:38 No messages received for 10 min. 0 sent since last one of these. 22:23:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 22:23:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:23:38 MsgArea S: [UTC 2019-2-28 22:23:50] 22:33:38 No messages received for 10 min. 0 sent since last one of these. 22:33:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 22:33:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:33:38 MsgArea S: 22:43:38 No messages received for 10 min. 0 sent since last one of these. 22:43:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 22:43:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:43:38 MsgArea S: [UTC 2019-2-28 22:43:50] 22:53:38 No messages received for 10 min. 0 sent since last one of these. 22:53:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 22:53:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:53:38 MsgArea S: 23:03:38 No messages received for 10 min. 0 sent since last one of these. 23:03:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 23:03:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:03:38 MsgArea S: [UTC 2019-2-28 23:03:50] 23:13:38 No messages received for 10 min. 0 sent since last one of these. 23:13:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 23:13:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:13:38 MsgArea S: 23:23:38 No messages received for 10 min. 0 sent since last one of these. 23:23:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 23:23:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:23:38 MsgArea S: [UTC 2019-2-28 23:23:50] 23:33:38 No messages received for 10 min. 0 sent since last one of these. 23:33:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 23:33:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:33:38 MsgArea S: 23:43:38 No messages received for 10 min. 0 sent since last one of these. 23:43:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 23:43:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:43:38 MsgArea S: [UTC 2019-2-28 23:43:50] 23:53:38 No messages received for 10 min. 0 sent since last one of these. 23:53:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 23:53:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:53:38 MsgArea S: 00:03:38 No messages received for 10 min. 0 sent since last one of these. 00:03:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 00:03:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:03:38 MsgArea S: [UTC 2019-3-1 00:03:50] 00:13:38 No messages received for 10 min. 0 sent since last one of these. 00:13:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 00:13:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:13:38 MsgArea S: 00:23:38 No messages received for 10 min. 0 sent since last one of these. 00:23:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 00:23:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:23:38 MsgArea S: [UTC 2019-3-1 00:23:50] 00:33:38 No messages received for 10 min. 0 sent since last one of these. 00:33:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 00:33:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:33:38 MsgArea S: 00:43:38 No messages received for 10 min. 0 sent since last one of these. 00:43:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 00:43:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:43:38 MsgArea S: [UTC 2019-3-1 00:43:50] 00:53:38 No messages received for 10 min. 0 sent since last one of these. 00:53:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 00:53:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:53:38 MsgArea S: 01:03:38 No messages received for 10 min. 0 sent since last one of these. 01:03:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 01:03:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:03:38 MsgArea S: [UTC 2019-3-1 01:03:50] 01:13:38 No messages received for 10 min. 0 sent since last one of these. 01:13:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 01:13:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:13:38 MsgArea S: 01:23:38 No messages received for 10 min. 0 sent since last one of these. 01:23:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 01:23:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:23:38 MsgArea S: [UTC 2019-3-1 01:23:50] 01:33:38 No messages received for 10 min. 0 sent since last one of these. 01:33:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 01:33:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:33:38 MsgArea S: 01:43:38 No messages received for 10 min. 0 sent since last one of these. 01:43:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 01:43:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:43:38 MsgArea S: [UTC 2019-3-1 01:43:50] 01:53:38 No messages received for 10 min. 0 sent since last one of these. 01:53:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 01:53:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:53:38 MsgArea S: 02:03:38 No messages received for 10 min. 0 sent since last one of these. 02:03:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 02:03:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:03:38 MsgArea S: [UTC 2019-3-1 02:03:50] 02:13:38 No messages received for 10 min. 0 sent since last one of these. 02:13:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 02:13:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:13:38 MsgArea S: 02:23:38 No messages received for 10 min. 0 sent since last one of these. 02:23:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 02:23:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:23:38 MsgArea S: [UTC 2019-3-1 02:23:50] 02:33:38 No messages received for 10 min. 0 sent since last one of these. 02:33:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 02:33:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:33:38 MsgArea S: 02:43:38 No messages received for 10 min. 0 sent since last one of these. 02:43:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 02:43:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:43:38 MsgArea S: [UTC 2019-3-1 02:43:50] 02:53:38 No messages received for 10 min. 0 sent since last one of these. 02:53:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 02:53:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:53:38 MsgArea S: 03:03:38 No messages received for 10 min. 0 sent since last one of these. 03:03:38 MsgArea H: nextMessageSerial=37512 startMsgs=68 nextFree=46308 maxMsg=65468 03:03:38 MsgArea Q: Master=45696:46104 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 03:03:38 MsgArea S: [UTC 2019-3-1 03:03:50] 03:12:19 Received message from Master: op=PointingHead serial=37513 03:12:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:12:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:12:19 Point started: ret=0 03:12:19 point_skyscan result=0 03:12:20 Check angles 03:12:20 SkyScan query 03:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:12:21 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:12:21 Message to Master queued w/err=0: serial=37513 error=0 03:12:26 Received message from Master: op=Filter serial=37514 03:12:26 Color wheel filter change from 2 to 2 03:12:26 FLIGetFilterPos err=0 currentPosition=2 03:12:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:12:26 Filter is already there-color wheel unchanged 03:12:26 Received message from Master: op=Shutter serial=37515 03:12:26 Shutter LASER close 03:12:27 Received message from Camera: op=State serial=37517 03:12:27 GetSingleValue result=40 Value=cccccccc 03:12:27 SkyScan query 03:12:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:12:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:28 Parameters OK 03:12:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:28 Set A/D data flow result=40 03:12:28 Set A/D channel type result=40 03:12:28 Set A/D encoding result=40 03:12:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:28 Set channel filter=0.000000e+000 result=40 03:12:28 Config A/D Result=40 03:12:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:28 Get A/D filter: -9.255963e+061 result=40 03:12:28 Get A/D value=-858993460 result=40 03:12:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:28 Parameters OK 03:12:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:28 Set A/D data flow result=40 03:12:28 Set A/D channel type result=40 03:12:28 Set A/D encoding result=40 03:12:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:28 Set channel filter=0.000000e+000 result=40 03:12:28 Config A/D Result=40 03:12:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:28 Get A/D filter: -9.255963e+061 result=40 03:12:28 Get A/D value=-858993460 result=40 03:12:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:12:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:12:28 Aux= 03:12:28 Message to Camera, serial 37517 queued 03:12:34 Received message from Master: op=PointingHead serial=37528 03:12:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:12:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:12:34 Point started: ret=0 03:12:34 point_skyscan result=0 03:12:35 Check angles 03:12:35 SkyScan query 03:12:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:12:35 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:12:35 Message to Master queued w/err=0: serial=37528 error=0 03:12:40 Received message from Master: op=Filter serial=37529 03:12:40 Color wheel filter change from 2 to 2 03:12:40 FLIGetFilterPos err=0 currentPosition=2 03:12:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:12:40 Filter is already there-color wheel unchanged 03:12:40 Received message from Master: op=Shutter serial=37530 03:12:40 Shutter LASER close 03:12:41 Received message from Camera: op=State serial=37532 03:12:41 GetSingleValue result=40 Value=cccccccc 03:12:41 SkyScan query 03:12:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:12:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:41 Parameters OK 03:12:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:41 Set A/D data flow result=40 03:12:41 Set A/D channel type result=40 03:12:41 Set A/D encoding result=40 03:12:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:41 Set channel filter=0.000000e+000 result=40 03:12:41 Config A/D Result=40 03:12:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:41 Get A/D filter: -9.255963e+061 result=40 03:12:41 Get A/D value=-858993460 result=40 03:12:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:41 Parameters OK 03:12:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:41 Set A/D data flow result=40 03:12:41 Set A/D channel type result=40 03:12:41 Set A/D encoding result=40 03:12:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:41 Set channel filter=0.000000e+000 result=40 03:12:41 Config A/D Result=40 03:12:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:41 Get A/D filter: -9.255963e+061 result=40 03:12:41 Get A/D value=-858993460 result=40 03:12:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:12:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:12:41 Aux= 03:12:41 Message to Camera, serial 37532 queued 03:13:17 Received message from Master: op=PointingHead serial=37544 03:13:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:13:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:13:17 Point started: ret=0 03:13:17 point_skyscan result=0 03:13:18 Check angles 03:13:18 SkyScan query 03:13:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:13:19 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:13:19 Message to Master queued w/err=0: serial=37544 error=0 03:13:24 Received message from Master: op=Filter serial=37545 03:13:24 Color wheel filter change from 2 to 2 03:13:24 FLIGetFilterPos err=0 currentPosition=2 03:13:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:13:24 Filter is already there-color wheel unchanged 03:13:24 Received message from Master: op=Shutter serial=37546 03:13:24 Shutter LASER open 03:13:24 Received message from Camera: op=State serial=37548 03:13:24 GetSingleValue result=40 Value=cccccccc 03:13:24 SkyScan query 03:13:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:13:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:25 Parameters OK 03:13:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:25 Set A/D data flow result=40 03:13:25 Set A/D channel type result=40 03:13:25 Set A/D encoding result=40 03:13:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:25 Set channel filter=0.000000e+000 result=40 03:13:25 Config A/D Result=40 03:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:25 Get A/D filter: -9.255963e+061 result=40 03:13:25 Get A/D value=-858993460 result=40 03:13:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:25 Parameters OK 03:13:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:25 Set A/D data flow result=40 03:13:25 Set A/D channel type result=40 03:13:25 Set A/D encoding result=40 03:13:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:25 Set channel filter=0.000000e+000 result=40 03:13:25 Config A/D Result=40 03:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:25 Get A/D filter: -9.255963e+061 result=40 03:13:25 Get A/D value=-858993460 result=40 03:13:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:13:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:13:25 Aux= 03:13:25 Message to Camera, serial 37548 queued 03:13:33 Received message from Master: op=Shutter serial=37558 03:13:33 Shutter LASER close 03:13:33 Received message from Master: op=PointingHead serial=37562 03:13:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:13:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:13:34 Point started: ret=0 03:13:34 point_skyscan result=0 03:13:35 Check angles 03:13:35 SkyScan query 03:13:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:13:35 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:13:35 Message to Master queued w/err=0: serial=37562 error=0 03:13:40 Received message from Master: op=Filter serial=37563 03:13:40 Color wheel filter change from 2 to 2 03:13:40 FLIGetFilterPos err=0 currentPosition=2 03:13:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:13:40 Filter is already there-color wheel unchanged 03:13:41 Received message from Master: op=Shutter serial=37564 03:13:41 Shutter LASER close 03:13:41 Received message from Camera: op=State serial=37566 03:13:41 GetSingleValue result=40 Value=cccccccc 03:13:41 SkyScan query 03:13:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:13:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:42 Parameters OK 03:13:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:42 Set A/D data flow result=40 03:13:42 Set A/D channel type result=40 03:13:42 Set A/D encoding result=40 03:13:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:42 Set channel filter=0.000000e+000 result=40 03:13:42 Config A/D Result=40 03:13:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:42 Get A/D filter: -9.255963e+061 result=40 03:13:42 Get A/D value=-858993460 result=40 03:13:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:42 Parameters OK 03:13:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:42 Set A/D data flow result=40 03:13:42 Set A/D channel type result=40 03:13:42 Set A/D encoding result=40 03:13:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:42 Set channel filter=0.000000e+000 result=40 03:13:42 Config A/D Result=40 03:13:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:42 Get A/D filter: -9.255963e+061 result=40 03:13:42 Get A/D value=-858993460 result=40 03:13:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:13:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:13:42 Aux= 03:13:42 Message to Camera, serial 37566 queued 03:13:51 Received message from Master: op=PointingHead serial=37578 03:13:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:13:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:13:51 Point started: ret=0 03:13:51 point_skyscan result=0 03:13:52 Check angles 03:13:52 SkyScan query 03:13:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 03:13:52 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 03:13:52 Check angles 03:13:52 SkyScan query 03:13:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 03:13:53 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 03:13:53 Check angles 03:13:53 SkyScan query 03:13:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 03:13:54 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 03:13:54 Check angles 03:13:54 SkyScan query 03:13:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 03:13:55 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 03:13:55 Check angles 03:13:55 SkyScan query 03:13:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.98<-15932 Statuses=0008 0009 03:13:55 Msec=3000 True Az=112.995 Ze=-58.98 Az status=0008 Ze status=0009 03:13:55 Check angles 03:13:55 SkyScan query 03:13:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 03:13:56 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 03:13:56 Check angles 03:13:56 SkyScan query 03:13:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.055<-13137 Statuses=0008 0009 03:13:57 Msec=4500 True Az=112.995 Ze=-17.055 Az status=0008 Ze status=0009 03:13:57 Check angles 03:13:57 SkyScan query 03:13:58 SkyScan query done: ret=0 az=112.995<-7533 ze=3.9<-11740 Statuses=0008 0009 03:13:58 Msec=5250 True Az=112.995 Ze=3.9 Az status=0008 Ze status=0009 03:13:58 Check angles 03:13:58 SkyScan query 03:13:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:13:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:13:58 Message to Master queued w/err=0: serial=37578 error=0 03:14:03 Received message from Master: op=Filter serial=37579 03:14:03 Color wheel filter change from 2 to 0 03:14:03 FLIGetFilterPos err=0 currentPosition=2 03:14:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:14:09 FLISetFilterPos err=0 rqPosition=0 03:14:09 FLIGetStepsRemaining err=0 RemainingSteps=0 03:14:09 Check after 0.00 sec for filter wheel DIn/CWh=0 03:14:09 FLIGetFilterPos err=0 currentPosition=0 03:14:09 FLIGetStepsRemaining err=0 RemainingSteps=0 03:14:10 Received message from Master: op=Shutter serial=37580 03:14:10 Shutter LASER close 03:14:10 Received message from Camera: op=State serial=37582 03:14:10 GetSingleValue result=40 Value=cccccccc 03:14:10 SkyScan query 03:14:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:14:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:10 Parameters OK 03:14:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:10 Set A/D data flow result=40 03:14:10 Set A/D channel type result=40 03:14:10 Set A/D encoding result=40 03:14:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:10 Set channel filter=0.000000e+000 result=40 03:14:10 Config A/D Result=40 03:14:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:10 Get A/D filter: -9.255963e+061 result=40 03:14:10 Get A/D value=-858993460 result=40 03:14:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:10 Parameters OK 03:14:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:10 Set A/D data flow result=40 03:14:10 Set A/D channel type result=40 03:14:10 Set A/D encoding result=40 03:14:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:10 Set channel filter=0.000000e+000 result=40 03:14:10 Config A/D Result=40 03:14:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:10 Get A/D filter: -9.255963e+061 result=40 03:14:10 Get A/D value=-858993460 result=40 03:14:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:14:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:14:10 Aux= 03:14:10 Message to Camera, serial 37582 queued 03:14:47 Received message from Master: op=PointingHead serial=37595 03:14:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:14:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:14:48 Point started: ret=0 03:14:48 point_skyscan result=0 03:14:48 Check angles 03:14:48 SkyScan query 03:14:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:14:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:14:49 Message to Master queued w/err=0: serial=37595 error=0 03:14:54 Received message from Master: op=Filter serial=37596 03:14:54 Color wheel filter change from 0 to 0 03:14:54 FLIGetFilterPos err=0 currentPosition=0 03:14:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:14:54 Filter is already there-color wheel unchanged 03:14:54 Received message from Master: op=Shutter serial=37597 03:14:54 Shutter LASER close 03:14:54 Received message from Camera: op=State serial=37599 03:14:54 GetSingleValue result=40 Value=cccccccc 03:14:54 SkyScan query 03:14:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:14:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:55 Parameters OK 03:14:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:55 Set A/D data flow result=40 03:14:55 Set A/D channel type result=40 03:14:55 Set A/D encoding result=40 03:14:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:55 Set channel filter=0.000000e+000 result=40 03:14:55 Config A/D Result=40 03:14:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:55 Get A/D filter: -9.255963e+061 result=40 03:14:55 Get A/D value=-858993460 result=40 03:14:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:55 Parameters OK 03:14:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:55 Set A/D data flow result=40 03:14:55 Set A/D channel type result=40 03:14:55 Set A/D encoding result=40 03:14:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:55 Set channel filter=0.000000e+000 result=40 03:14:55 Config A/D Result=40 03:14:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:55 Get A/D filter: -9.255963e+061 result=40 03:14:55 Get A/D value=-858993460 result=40 03:14:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:14:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:14:55 Aux= 03:14:55 Message to Camera, serial 37599 queued 03:15:32 Received message from Master: op=PointingHead serial=37612 03:15:32 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:15:32 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:15:32 Point started: ret=0 03:15:32 point_skyscan result=0 03:15:33 Check angles 03:15:33 SkyScan query 03:15:33 SkyScan query done: ret=0 az=135.99<-9066 ze=-6.51<-12434 Statuses=0009 0008 03:15:33 Msec=0 True Az=135.99 Ze=-6.51 Az status=0009 Ze status=0008 03:15:33 Check angles 03:15:33 SkyScan query 03:15:34 SkyScan query done: ret=0 az=153.405<-10227 ze=-6.495<-12433 Statuses=0009 0008 03:15:34 Msec=750 True Az=153.405 Ze=-6.495 Az status=0009 Ze status=0008 03:15:34 Check angles 03:15:34 SkyScan query 03:15:35 SkyScan query done: ret=0 az=171.015<-11401 ze=-6.495<-12433 Statuses=0009 0008 03:15:35 Msec=1500 True Az=171.015 Ze=-6.495 Az status=0009 Ze status=0008 03:15:35 Check angles 03:15:35 SkyScan query 03:15:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:15:35 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:15:35 Message to Master queued w/err=0: serial=37612 error=0 03:15:40 Received message from Master: op=Filter serial=37613 03:15:40 Color wheel filter change from 0 to 0 03:15:40 FLIGetFilterPos err=0 currentPosition=0 03:15:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:15:40 Filter is already there-color wheel unchanged 03:15:41 Received message from Master: op=Shutter serial=37614 03:15:41 Shutter LASER close 03:15:41 Received message from Camera: op=State serial=37616 03:15:41 GetSingleValue result=40 Value=cccccccc 03:15:41 SkyScan query 03:15:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:15:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:41 Parameters OK 03:15:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:41 Set A/D data flow result=40 03:15:41 Set A/D channel type result=40 03:15:41 Set A/D encoding result=40 03:15:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:41 Set channel filter=0.000000e+000 result=40 03:15:41 Config A/D Result=40 03:15:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:41 Get A/D filter: -9.255963e+061 result=40 03:15:41 Get A/D value=-858993460 result=40 03:15:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:41 Parameters OK 03:15:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:41 Set A/D data flow result=40 03:15:41 Set A/D channel type result=40 03:15:41 Set A/D encoding result=40 03:15:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:41 Set channel filter=0.000000e+000 result=40 03:15:41 Config A/D Result=40 03:15:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:41 Get A/D filter: -9.255963e+061 result=40 03:15:41 Get A/D value=-858993460 result=40 03:15:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:15:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:15:41 Aux= 03:15:41 Message to Camera, serial 37616 queued 03:16:18 Received message from Master: op=PointingHead serial=37629 03:16:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:16:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:16:18 Point started: ret=0 03:16:18 point_skyscan result=0 03:16:19 Check angles 03:16:19 SkyScan query 03:16:20 SkyScan query done: ret=0 az=152.535<-10169 ze=6.51<-11566 Statuses=0009 0008 03:16:20 Msec=0 True Az=152.535 Ze=6.51 Az status=0009 Ze status=0008 03:16:20 Check angles 03:16:20 SkyScan query 03:16:20 SkyScan query done: ret=0 az=134.76<-8984 ze=6.495<-11567 Statuses=0009 0008 03:16:20 Msec=750 True Az=134.76 Ze=6.495 Az status=0009 Ze status=0008 03:16:21 Check angles 03:16:21 SkyScan query 03:16:21 SkyScan query done: ret=0 az=117.225<-7815 ze=6.495<-11567 Statuses=0009 0008 03:16:21 Msec=1500 True Az=117.225 Ze=6.495 Az status=0009 Ze status=0008 03:16:21 Check angles 03:16:21 SkyScan query 03:16:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:16:22 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:16:22 Message to Master queued w/err=0: serial=37629 error=0 03:16:27 Received message from Master: op=Filter serial=37630 03:16:27 Color wheel filter change from 0 to 0 03:16:27 FLIGetFilterPos err=0 currentPosition=0 03:16:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:16:27 Filter is already there-color wheel unchanged 03:16:27 Received message from Master: op=Shutter serial=37631 03:16:27 Shutter LASER close 03:16:27 Received message from Camera: op=State serial=37633 03:16:27 GetSingleValue result=40 Value=cccccccc 03:16:27 SkyScan query 03:16:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:16:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:28 Parameters OK 03:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:28 Set A/D data flow result=40 03:16:28 Set A/D channel type result=40 03:16:28 Set A/D encoding result=40 03:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:28 Set channel filter=0.000000e+000 result=40 03:16:28 Config A/D Result=40 03:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:28 Get A/D filter: -9.255963e+061 result=40 03:16:28 Get A/D value=-858993460 result=40 03:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:28 Parameters OK 03:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:28 Set A/D data flow result=40 03:16:28 Set A/D channel type result=40 03:16:28 Set A/D encoding result=40 03:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:28 Set channel filter=0.000000e+000 result=40 03:16:28 Config A/D Result=40 03:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:28 Get A/D filter: -9.255963e+061 result=40 03:16:28 Get A/D value=-858993460 result=40 03:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:16:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:16:28 Aux= 03:16:28 Message to Camera, serial 37633 queued 03:17:05 Received message from Master: op=PointingHead serial=37646 03:17:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:17:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:17:05 Point started: ret=0 03:17:05 point_skyscan result=0 03:17:06 Check angles 03:17:06 SkyScan query 03:17:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 03:17:06 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 03:17:06 Check angles 03:17:06 SkyScan query 03:17:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 03:17:07 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 03:17:07 Check angles 03:17:07 SkyScan query 03:17:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 03:17:08 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 03:17:08 Check angles 03:17:08 SkyScan query 03:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.745<-17783 Statuses=0008 0009 03:17:09 Msec=2250 True Az=112.995 Ze=-86.745 Az status=0008 Ze status=0009 03:17:09 Check angles 03:17:09 SkyScan query 03:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 03:17:09 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 03:17:09 Check angles 03:17:09 SkyScan query 03:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 03:17:10 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 03:17:10 Check angles 03:17:10 SkyScan query 03:17:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 03:17:11 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 03:17:11 Check angles 03:17:11 SkyScan query 03:17:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.88<-23392 Statuses=0008 0009 03:17:12 Msec=5250 True Az=112.995 Ze=-170.88 Az status=0008 Ze status=0009 03:17:12 Check angles 03:17:12 SkyScan query 03:17:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:17:12 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:17:12 Message to Master queued w/err=0: serial=37646 error=0 03:17:17 Received message from Master: op=Filter serial=37647 03:17:17 Color wheel filter change from 0 to 0 03:17:17 FLIGetFilterPos err=0 currentPosition=0 03:17:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:17:17 Filter is already there-color wheel unchanged 03:17:17 Received message from Master: op=Shutter serial=37648 03:17:17 Shutter LASER open 03:17:18 Received message from Camera: op=State serial=37650 03:17:18 GetSingleValue result=40 Value=cccccccc 03:17:18 SkyScan query 03:17:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:17:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:18 Parameters OK 03:17:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:18 Set A/D data flow result=40 03:17:18 Set A/D channel type result=40 03:17:18 Set A/D encoding result=40 03:17:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:18 Set channel filter=0.000000e+000 result=40 03:17:18 Config A/D Result=40 03:17:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:18 Get A/D filter: -9.255963e+061 result=40 03:17:18 Get A/D value=-858993460 result=40 03:17:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:18 Parameters OK 03:17:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:18 Set A/D data flow result=40 03:17:18 Set A/D channel type result=40 03:17:18 Set A/D encoding result=40 03:17:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:18 Set channel filter=0.000000e+000 result=40 03:17:18 Config A/D Result=40 03:17:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:18 Get A/D filter: -9.255963e+061 result=40 03:17:18 Get A/D value=-858993460 result=40 03:17:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:17:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:17:18 Aux= 03:17:18 Message to Camera, serial 37650 queued 03:17:27 Received message from Master: op=Shutter serial=37660 03:17:27 Shutter LASER close 03:17:27 Received message from Master: op=PointingHead serial=37664 03:17:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:17:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:17:27 Point started: ret=0 03:17:27 point_skyscan result=0 03:17:28 Check angles 03:17:28 SkyScan query 03:17:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 03:17:29 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 03:17:29 Check angles 03:17:29 SkyScan query 03:17:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 03:17:30 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 03:17:30 Check angles 03:17:30 SkyScan query 03:17:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 03:17:30 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 03:17:30 Check angles 03:17:30 SkyScan query 03:17:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 03:17:31 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 03:17:31 Check angles 03:17:31 SkyScan query 03:17:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.265<-15951 Statuses=0008 0009 03:17:32 Msec=3000 True Az=112.995 Ze=-59.265 Az status=0008 Ze status=0009 03:17:32 Check angles 03:17:32 SkyScan query 03:17:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.295<-14553 Statuses=0008 0009 03:17:33 Msec=3750 True Az=112.995 Ze=-38.295 Az status=0008 Ze status=0009 03:17:33 Check angles 03:17:33 SkyScan query 03:17:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.355<-13157 Statuses=0008 0009 03:17:33 Msec=4500 True Az=112.995 Ze=-17.355 Az status=0008 Ze status=0009 03:17:33 Check angles 03:17:33 SkyScan query 03:17:34 SkyScan query done: ret=0 az=112.995<-7533 ze=3.615<-11759 Statuses=0008 0009 03:17:34 Msec=5250 True Az=112.995 Ze=3.615 Az status=0008 Ze status=0009 03:17:34 Check angles 03:17:34 SkyScan query 03:17:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:17:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:17:35 Message to Master queued w/err=0: serial=37664 error=0 03:17:40 Received message from Master: op=Filter serial=37665 03:17:40 Color wheel filter change from 0 to 0 03:17:40 FLIGetFilterPos err=0 currentPosition=0 03:17:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:17:40 Filter is already there-color wheel unchanged 03:17:40 Received message from Master: op=Shutter serial=37666 03:17:40 Shutter LASER close 03:17:40 Received message from Camera: op=State serial=37668 03:17:40 GetSingleValue result=40 Value=cccccccc 03:17:40 SkyScan query 03:17:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:17:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:41 Parameters OK 03:17:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:41 Set A/D data flow result=40 03:17:41 Set A/D channel type result=40 03:17:41 Set A/D encoding result=40 03:17:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:41 Set channel filter=0.000000e+000 result=40 03:17:41 Config A/D Result=40 03:17:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:41 Get A/D filter: -9.255963e+061 result=40 03:17:41 Get A/D value=-858993460 result=40 03:17:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:41 Parameters OK 03:17:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:41 Set A/D data flow result=40 03:17:41 Set A/D channel type result=40 03:17:41 Set A/D encoding result=40 03:17:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:41 Set channel filter=0.000000e+000 result=40 03:17:41 Config A/D Result=40 03:17:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:41 Get A/D filter: -9.255963e+061 result=40 03:17:41 Get A/D value=-858993460 result=40 03:17:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:17:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:17:41 Aux= 03:17:41 Message to Camera, serial 37668 queued 03:18:17 Received message from Master: op=PointingHead serial=37680 03:18:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:18:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:18:17 Point started: ret=0 03:18:17 point_skyscan result=0 03:18:18 Check angles 03:18:18 SkyScan query 03:18:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.48<-11568 Statuses=0008 0008 03:18:18 Msec=0 True Az=112.995 Ze=6.48 Az status=0008 Ze status=0008 03:18:18 Message to Master queued w/err=0: serial=37680 error=0 03:18:23 Received message from Master: op=Filter serial=37681 03:18:23 Color wheel filter change from 0 to 0 03:18:23 FLIGetFilterPos err=0 currentPosition=0 03:18:23 FLIGetStepsRemaining err=0 RemainingSteps=0 03:18:23 Filter is already there-color wheel unchanged 03:18:23 Received message from Master: op=Shutter serial=37682 03:18:23 Shutter LASER close 03:18:23 Received message from Camera: op=State serial=37684 03:18:23 GetSingleValue result=40 Value=cccccccc 03:18:23 SkyScan query 03:18:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:18:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:24 Parameters OK 03:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:24 Set A/D data flow result=40 03:18:24 Set A/D channel type result=40 03:18:24 Set A/D encoding result=40 03:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:24 Set channel filter=0.000000e+000 result=40 03:18:24 Config A/D Result=40 03:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:24 Get A/D filter: -9.255963e+061 result=40 03:18:24 Get A/D value=-858993460 result=40 03:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:24 Parameters OK 03:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:24 Set A/D data flow result=40 03:18:24 Set A/D channel type result=40 03:18:24 Set A/D encoding result=40 03:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:24 Set channel filter=0.000000e+000 result=40 03:18:24 Config A/D Result=40 03:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:24 Get A/D filter: -9.255963e+061 result=40 03:18:24 Get A/D value=-858993460 result=40 03:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:18:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:18:24 Aux= 03:18:24 Message to Camera, serial 37684 queued 03:19:01 Received message from Master: op=PointingHead serial=37697 03:19:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:19:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:19:01 Point started: ret=0 03:19:01 point_skyscan result=0 03:19:02 Check angles 03:19:02 SkyScan query 03:19:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:19:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:19:03 Message to Master queued w/err=0: serial=37697 error=0 03:19:08 Received message from Master: op=Filter serial=37698 03:19:08 Color wheel filter change from 0 to 0 03:19:08 FLIGetFilterPos err=0 currentPosition=0 03:19:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:08 Filter is already there-color wheel unchanged 03:19:08 Received message from Master: op=Shutter serial=37699 03:19:08 Shutter LASER close 03:19:08 Received message from Camera: op=State serial=37701 03:19:08 GetSingleValue result=40 Value=cccccccc 03:19:08 SkyScan query 03:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:19:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:08 Parameters OK 03:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:08 Set A/D data flow result=40 03:19:08 Set A/D channel type result=40 03:19:08 Set A/D encoding result=40 03:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:08 Set channel filter=0.000000e+000 result=40 03:19:08 Config A/D Result=40 03:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:08 Get A/D filter: -9.255963e+061 result=40 03:19:08 Get A/D value=-858993460 result=40 03:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:08 Parameters OK 03:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:08 Set A/D data flow result=40 03:19:08 Set A/D channel type result=40 03:19:08 Set A/D encoding result=40 03:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:08 Set channel filter=0.000000e+000 result=40 03:19:08 Config A/D Result=40 03:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:08 Get A/D filter: -9.255963e+061 result=40 03:19:08 Get A/D value=-858993460 result=40 03:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:08 Aux= 03:19:08 Message to Camera, serial 37701 queued 03:19:45 Received message from Master: op=PointingHead serial=37714 03:19:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:19:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:19:45 Point started: ret=0 03:19:45 point_skyscan result=0 03:19:46 Check angles 03:19:46 SkyScan query 03:19:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:19:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:19:47 Message to Master queued w/err=0: serial=37714 error=0 03:19:52 Received message from Master: op=Filter serial=37715 03:19:52 Color wheel filter change from 0 to 0 03:19:52 FLIGetFilterPos err=0 currentPosition=0 03:19:52 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:52 Filter is already there-color wheel unchanged 03:19:52 Received message from Master: op=Shutter serial=37716 03:19:52 Shutter LASER close 03:19:52 Received message from Camera: op=State serial=37718 03:19:52 GetSingleValue result=40 Value=cccccccc 03:19:52 SkyScan query 03:19:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:19:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:53 Parameters OK 03:19:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:53 Set A/D data flow result=40 03:19:53 Set A/D channel type result=40 03:19:53 Set A/D encoding result=40 03:19:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:53 Set channel filter=0.000000e+000 result=40 03:19:53 Config A/D Result=40 03:19:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:53 Get A/D filter: -9.255963e+061 result=40 03:19:53 Get A/D value=-858993460 result=40 03:19:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:53 Parameters OK 03:19:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:53 Set A/D data flow result=40 03:19:53 Set A/D channel type result=40 03:19:53 Set A/D encoding result=40 03:19:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:53 Set channel filter=0.000000e+000 result=40 03:19:53 Config A/D Result=40 03:19:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:53 Get A/D filter: -9.255963e+061 result=40 03:19:53 Get A/D value=-858993460 result=40 03:19:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:53 Aux= 03:19:53 Message to Camera, serial 37718 queued 03:20:29 Received message from Master: op=PointingHead serial=37731 03:20:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:20:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:20:30 Point started: ret=0 03:20:30 point_skyscan result=0 03:20:31 Check angles 03:20:31 SkyScan query 03:20:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 03:20:31 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 03:20:31 Check angles 03:20:31 SkyScan query 03:20:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 03:20:32 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 03:20:32 Check angles 03:20:32 SkyScan query 03:20:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.79<-16386 Statuses=0008 0009 03:20:33 Msec=1500 True Az=112.995 Ze=-65.79 Az status=0008 Ze status=0009 03:20:33 Check angles 03:20:33 SkyScan query 03:20:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.745<-17783 Statuses=0008 0009 03:20:33 Msec=2250 True Az=112.995 Ze=-86.745 Az status=0008 Ze status=0009 03:20:34 Check angles 03:20:34 SkyScan query 03:20:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 03:20:34 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 03:20:34 Check angles 03:20:34 SkyScan query 03:20:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 03:20:35 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 03:20:35 Check angles 03:20:35 SkyScan query 03:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 03:20:36 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 03:20:36 Check angles 03:20:36 SkyScan query 03:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.88<-23392 Statuses=0008 0009 03:20:36 Msec=5250 True Az=112.995 Ze=-170.88 Az status=0008 Ze status=0009 03:20:37 Check angles 03:20:37 SkyScan query 03:20:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:20:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:20:37 Message to Master queued w/err=0: serial=37731 error=0 03:20:42 Received message from Master: op=Filter serial=37732 03:20:42 Color wheel filter change from 0 to 0 03:20:42 FLIGetFilterPos err=0 currentPosition=0 03:20:42 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:42 Filter is already there-color wheel unchanged 03:20:42 Received message from Master: op=Shutter serial=37733 03:20:42 Shutter LASER open 03:20:42 Received message from Camera: op=State serial=37735 03:20:42 GetSingleValue result=40 Value=cccccccc 03:20:42 SkyScan query 03:20:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:20:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:43 Parameters OK 03:20:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:43 Set A/D data flow result=40 03:20:43 Set A/D channel type result=40 03:20:43 Set A/D encoding result=40 03:20:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:43 Set channel filter=0.000000e+000 result=40 03:20:43 Config A/D Result=40 03:20:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:43 Get A/D filter: -9.255963e+061 result=40 03:20:43 Get A/D value=-858993460 result=40 03:20:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:43 Parameters OK 03:20:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:43 Set A/D data flow result=40 03:20:43 Set A/D channel type result=40 03:20:43 Set A/D encoding result=40 03:20:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:43 Set channel filter=0.000000e+000 result=40 03:20:43 Config A/D Result=40 03:20:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:43 Get A/D filter: -9.255963e+061 result=40 03:20:43 Get A/D value=-858993460 result=40 03:20:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:20:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:20:43 Aux= 03:20:43 Message to Camera, serial 37735 queued 03:20:51 Received message from Master: op=Shutter serial=37745 03:20:51 Shutter LASER close 03:20:52 Received message from Master: op=PointingHead serial=37749 03:20:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:20:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:20:52 Point started: ret=0 03:20:52 point_skyscan result=0 03:20:53 Check angles 03:20:53 SkyScan query 03:20:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 03:20:54 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 03:20:54 Check angles 03:20:54 SkyScan query 03:20:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.4<-20160 Statuses=0008 0009 03:20:54 Msec=750 True Az=112.995 Ze=-122.4 Az status=0008 Ze status=0009 03:20:55 Check angles 03:20:55 SkyScan query 03:20:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 03:20:55 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 03:20:55 Check angles 03:20:55 SkyScan query 03:20:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.605<-17307 Statuses=0008 0009 03:20:56 Msec=2250 True Az=112.995 Ze=-79.605 Az status=0008 Ze status=0009 03:20:56 Check angles 03:20:56 SkyScan query 03:20:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.65<-15910 Statuses=0008 0009 03:20:57 Msec=3000 True Az=112.995 Ze=-58.65 Az status=0008 Ze status=0009 03:20:57 Check angles 03:20:57 SkyScan query 03:20:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 03:20:58 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 03:20:58 Check angles 03:20:58 SkyScan query 03:20:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.74<-13116 Statuses=0008 0009 03:20:58 Msec=4500 True Az=112.995 Ze=-16.74 Az status=0008 Ze status=0009 03:20:58 Check angles 03:20:58 SkyScan query 03:20:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.17<-11722 Statuses=0008 0009 03:20:59 Msec=5250 True Az=112.995 Ze=4.17 Az status=0008 Ze status=0009 03:20:59 Check angles 03:20:59 SkyScan query 03:21:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:21:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:21:00 Message to Master queued w/err=0: serial=37749 error=0 03:21:05 Received message from Master: op=Filter serial=37750 03:21:05 Color wheel filter change from 0 to 0 03:21:05 FLIGetFilterPos err=0 currentPosition=0 03:21:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:21:05 Filter is already there-color wheel unchanged 03:21:05 Received message from Master: op=Shutter serial=37751 03:21:05 Shutter LASER close 03:21:05 Received message from Camera: op=State serial=37753 03:21:05 GetSingleValue result=40 Value=cccccccc 03:21:05 SkyScan query 03:21:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:21:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:06 Parameters OK 03:21:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:06 Set A/D data flow result=40 03:21:06 Set A/D channel type result=40 03:21:06 Set A/D encoding result=40 03:21:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:06 Set channel filter=0.000000e+000 result=40 03:21:06 Config A/D Result=40 03:21:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:06 Get A/D filter: -9.255963e+061 result=40 03:21:06 Get A/D value=-858993460 result=40 03:21:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:06 Parameters OK 03:21:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:06 Set A/D data flow result=40 03:21:06 Set A/D channel type result=40 03:21:06 Set A/D encoding result=40 03:21:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:06 Set channel filter=0.000000e+000 result=40 03:21:06 Config A/D Result=40 03:21:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:06 Get A/D filter: -9.255963e+061 result=40 03:21:06 Get A/D value=-858993460 result=40 03:21:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:21:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:21:06 Aux= 03:21:06 Message to Camera, serial 37753 queued 03:21:43 Received message from Master: op=PointingHead serial=37766 03:21:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:21:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:21:43 Point started: ret=0 03:21:43 point_skyscan result=0 03:21:44 Check angles 03:21:44 SkyScan query 03:21:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:21:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:21:44 Message to Master queued w/err=0: serial=37766 error=0 03:21:49 Received message from Master: op=Filter serial=37767 03:21:49 Color wheel filter change from 0 to 0 03:21:49 FLIGetFilterPos err=0 currentPosition=0 03:21:49 FLIGetStepsRemaining err=0 RemainingSteps=0 03:21:49 Filter is already there-color wheel unchanged 03:21:49 Received message from Master: op=Shutter serial=37768 03:21:49 Shutter LASER close 03:21:49 Received message from Camera: op=State serial=37770 03:21:49 GetSingleValue result=40 Value=cccccccc 03:21:49 SkyScan query 03:21:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:21:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:50 Parameters OK 03:21:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:50 Set A/D data flow result=40 03:21:50 Set A/D channel type result=40 03:21:50 Set A/D encoding result=40 03:21:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:50 Set channel filter=0.000000e+000 result=40 03:21:50 Config A/D Result=40 03:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:50 Get A/D filter: -9.255963e+061 result=40 03:21:50 Get A/D value=-858993460 result=40 03:21:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:50 Parameters OK 03:21:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:50 Set A/D data flow result=40 03:21:50 Set A/D channel type result=40 03:21:50 Set A/D encoding result=40 [UTC 2019-3-1 03:21:50] 03:21:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:50 Set channel filter=0.000000e+000 result=40 03:21:50 Config A/D Result=40 03:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:50 Get A/D filter: -9.255963e+061 result=40 03:21:50 Get A/D value=-858993460 result=40 03:21:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:21:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:21:50 Aux= 03:21:50 Message to Camera, serial 37770 queued 03:22:27 Received message from Master: op=PointingHead serial=37783 03:22:27 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:22:27 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:22:27 Point started: ret=0 03:22:27 point_skyscan result=0 03:22:28 Check angles 03:22:28 SkyScan query 03:22:29 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 03:22:29 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 03:22:29 Check angles 03:22:29 SkyScan query 03:22:29 SkyScan query done: ret=0 az=153.84<-10256 ze=-6.495<-12433 Statuses=0009 0008 03:22:29 Msec=750 True Az=153.84 Ze=-6.495 Az status=0009 Ze status=0008 03:22:29 Check angles 03:22:29 SkyScan query 03:22:30 SkyScan query done: ret=0 az=171.39<-11426 ze=-6.495<-12433 Statuses=0009 0008 03:22:30 Msec=1500 True Az=171.39 Ze=-6.495 Az status=0009 Ze status=0008 03:22:30 Check angles 03:22:30 SkyScan query 03:22:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:22:31 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:22:31 Message to Master queued w/err=0: serial=37783 error=0 03:22:36 Received message from Master: op=Filter serial=37784 03:22:36 Color wheel filter change from 0 to 0 03:22:36 FLIGetFilterPos err=0 currentPosition=0 03:22:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:36 Filter is already there-color wheel unchanged 03:22:36 Received message from Master: op=Shutter serial=37785 03:22:36 Shutter LASER close 03:22:36 Received message from Camera: op=State serial=37787 03:22:36 GetSingleValue result=40 Value=cccccccc 03:22:36 SkyScan query 03:22:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:22:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:37 Parameters OK 03:22:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:37 Set A/D data flow result=40 03:22:37 Set A/D channel type result=40 03:22:37 Set A/D encoding result=40 03:22:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:37 Set channel filter=0.000000e+000 result=40 03:22:37 Config A/D Result=40 03:22:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:37 Get A/D filter: -9.255963e+061 result=40 03:22:37 Get A/D value=-858993460 result=40 03:22:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:37 Parameters OK 03:22:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:37 Set A/D data flow result=40 03:22:37 Set A/D channel type result=40 03:22:37 Set A/D encoding result=40 03:22:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:37 Set channel filter=0.000000e+000 result=40 03:22:37 Config A/D Result=40 03:22:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:37 Get A/D filter: -9.255963e+061 result=40 03:22:37 Get A/D value=-858993460 result=40 03:22:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:22:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:22:37 Aux= 03:22:37 Message to Camera, serial 37787 queued 03:23:13 Received message from Master: op=PointingHead serial=37800 03:23:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:23:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:23:14 Point started: ret=0 03:23:14 point_skyscan result=0 03:23:15 Check angles 03:23:15 SkyScan query 03:23:15 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 03:23:15 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 03:23:15 Check angles 03:23:15 SkyScan query 03:23:16 SkyScan query done: ret=0 az=135.495<-9033 ze=6.495<-11567 Statuses=0009 0008 03:23:16 Msec=750 True Az=135.495 Ze=6.495 Az status=0009 Ze status=0008 03:23:16 Check angles 03:23:16 SkyScan query 03:23:17 SkyScan query done: ret=0 az=118.05<-7870 ze=6.495<-11567 Statuses=0009 0008 03:23:17 Msec=1500 True Az=118.05 Ze=6.495 Az status=0009 Ze status=0008 03:23:17 Check angles 03:23:17 SkyScan query 03:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:23:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:23:17 Message to Master queued w/err=0: serial=37800 error=0 03:23:22 Received message from Master: op=Filter serial=37801 03:23:22 Color wheel filter change from 0 to 0 03:23:22 FLIGetFilterPos err=0 currentPosition=0 03:23:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:22 Filter is already there-color wheel unchanged 03:23:23 Received message from Master: op=Shutter serial=37802 03:23:23 Shutter LASER close 03:23:23 Received message from Camera: op=State serial=37804 03:23:23 GetSingleValue result=40 Value=cccccccc 03:23:23 SkyScan query 03:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:23:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:23 Parameters OK 03:23:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:23 Set A/D data flow result=40 03:23:23 Set A/D channel type result=40 03:23:23 Set A/D encoding result=40 03:23:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:23 Set channel filter=0.000000e+000 result=40 03:23:23 Config A/D Result=40 03:23:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:23 Get A/D filter: -9.255963e+061 result=40 03:23:23 Get A/D value=-858993460 result=40 03:23:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:23 Parameters OK 03:23:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:23 Set A/D data flow result=40 03:23:23 Set A/D channel type result=40 03:23:23 Set A/D encoding result=40 03:23:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:23 Set channel filter=0.000000e+000 result=40 03:23:23 Config A/D Result=40 03:23:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:23 Get A/D filter: -9.255963e+061 result=40 03:23:23 Get A/D value=-858993460 result=40 03:23:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:23 Aux= 03:23:23 Message to Camera, serial 37804 queued [UTC 2019-3-1 03:23:50] 03:24:00 Received message from Master: op=PointingHead serial=37817 03:24:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:24:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:24:00 Point started: ret=0 03:24:00 point_skyscan result=0 03:24:01 Check angles 03:24:01 SkyScan query 03:24:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 03:24:02 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 03:24:02 Check angles 03:24:02 SkyScan query 03:24:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 03:24:02 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 03:24:03 Check angles 03:24:03 SkyScan query 03:24:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 03:24:03 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 03:24:03 Check angles 03:24:03 SkyScan query 03:24:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.79<-17786 Statuses=0008 0009 03:24:04 Msec=2250 True Az=112.995 Ze=-86.79 Az status=0008 Ze status=0009 03:24:04 Check angles 03:24:04 SkyScan query 03:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.73<-19182 Statuses=0008 0009 03:24:05 Msec=3000 True Az=112.995 Ze=-107.73 Az status=0008 Ze status=0009 03:24:05 Check angles 03:24:05 SkyScan query 03:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.105<-20607 Statuses=0008 0009 03:24:05 Msec=3750 True Az=112.995 Ze=-129.105 Az status=0008 Ze status=0009 03:24:06 Check angles 03:24:06 SkyScan query 03:24:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.075<-22005 Statuses=0008 0009 03:24:06 Msec=4500 True Az=112.995 Ze=-150.075 Az status=0008 Ze status=0009 03:24:06 Check angles 03:24:06 SkyScan query 03:24:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0008 0009 03:24:07 Msec=5250 True Az=112.995 Ze=-170.925 Az status=0008 Ze status=0009 03:24:07 Check angles 03:24:07 SkyScan query 03:24:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:24:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:24:08 Message to Master queued w/err=0: serial=37817 error=0 03:24:13 Received message from Master: op=Filter serial=37818 03:24:13 Color wheel filter change from 0 to 0 03:24:13 FLIGetFilterPos err=0 currentPosition=0 03:24:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:13 Filter is already there-color wheel unchanged 03:24:13 Received message from Master: op=Shutter serial=37819 03:24:13 Shutter LASER open 03:24:13 Received message from Camera: op=State serial=37821 03:24:13 GetSingleValue result=40 Value=cccccccc 03:24:13 SkyScan query 03:24:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:24:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:14 Parameters OK 03:24:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:14 Set A/D data flow result=40 03:24:14 Set A/D channel type result=40 03:24:14 Set A/D encoding result=40 03:24:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:14 Set channel filter=0.000000e+000 result=40 03:24:14 Config A/D Result=40 03:24:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:14 Get A/D filter: -9.255963e+061 result=40 03:24:14 Get A/D value=-858993460 result=40 03:24:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:14 Parameters OK 03:24:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:14 Set A/D data flow result=40 03:24:14 Set A/D channel type result=40 03:24:14 Set A/D encoding result=40 03:24:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:14 Set channel filter=0.000000e+000 result=40 03:24:14 Config A/D Result=40 03:24:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:14 Get A/D filter: -9.255963e+061 result=40 03:24:14 Get A/D value=-858993460 result=40 03:24:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:14 Aux= 03:24:14 Message to Camera, serial 37821 queued 03:24:22 Received message from Master: op=Shutter serial=37831 03:24:22 Shutter LASER close 03:24:23 Received message from Master: op=PointingHead serial=37835 03:24:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:24:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:24:23 Point started: ret=0 03:24:23 point_skyscan result=0 03:24:24 Check angles 03:24:24 SkyScan query 03:24:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.13<-21542 Statuses=0008 0009 03:24:24 Msec=0 True Az=112.995 Ze=-143.13 Az status=0008 Ze status=0009 03:24:24 Check angles 03:24:24 SkyScan query 03:24:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 03:24:25 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 03:24:25 Check angles 03:24:25 SkyScan query 03:24:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.8<-18720 Statuses=0008 0009 03:24:26 Msec=1500 True Az=112.995 Ze=-100.8 Az status=0008 Ze status=0009 03:24:26 Check angles 03:24:26 SkyScan query 03:24:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 03:24:27 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 03:24:27 Check angles 03:24:27 SkyScan query 03:24:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.99<-15866 Statuses=0008 0009 03:24:27 Msec=3000 True Az=112.995 Ze=-57.99 Az status=0008 Ze status=0009 03:24:27 Check angles 03:24:27 SkyScan query 03:24:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.065<-14471 Statuses=0008 0009 03:24:28 Msec=3750 True Az=112.995 Ze=-37.065 Az status=0008 Ze status=0009 03:24:28 Check angles 03:24:28 SkyScan query 03:24:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.095<-13073 Statuses=0008 0009 03:24:29 Msec=4500 True Az=112.995 Ze=-16.095 Az status=0008 Ze status=0009 03:24:29 Check angles 03:24:29 SkyScan query 03:24:30 SkyScan query done: ret=0 az=112.995<-7533 ze=4.68<-11688 Statuses=0008 0009 03:24:30 Msec=5250 True Az=112.995 Ze=4.68 Az status=0008 Ze status=0009 03:24:30 Check angles 03:24:30 SkyScan query 03:24:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:24:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:24:30 Message to Master queued w/err=0: serial=37835 error=0 03:24:35 Received message from Master: op=Filter serial=37836 03:24:35 Color wheel filter change from 0 to 0 03:24:35 FLIGetFilterPos err=0 currentPosition=0 03:24:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:35 Filter is already there-color wheel unchanged 03:24:35 Received message from Master: op=Shutter serial=37837 03:24:35 Shutter LASER close 03:24:36 Received message from Camera: op=State serial=37839 03:24:36 GetSingleValue result=40 Value=cccccccc 03:24:36 SkyScan query 03:24:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:24:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:36 Parameters OK 03:24:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:36 Set A/D data flow result=40 03:24:36 Set A/D channel type result=40 03:24:36 Set A/D encoding result=40 03:24:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:36 Set channel filter=0.000000e+000 result=40 03:24:36 Config A/D Result=40 03:24:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:36 Get A/D filter: -9.255963e+061 result=40 03:24:36 Get A/D value=-858993460 result=40 03:24:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:36 Parameters OK 03:24:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:36 Set A/D data flow result=40 03:24:36 Set A/D channel type result=40 03:24:36 Set A/D encoding result=40 03:24:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:36 Set channel filter=0.000000e+000 result=40 03:24:36 Config A/D Result=40 03:24:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:36 Get A/D filter: -9.255963e+061 result=40 03:24:36 Get A/D value=-858993460 result=40 03:24:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:36 Aux= 03:24:36 Message to Camera, serial 37839 queued 03:25:13 Received message from Master: op=PointingHead serial=37852 03:25:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:25:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:25:13 Point started: ret=0 03:25:13 point_skyscan result=0 03:25:14 Check angles 03:25:14 SkyScan query 03:25:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:25:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:25:15 Message to Master queued w/err=0: serial=37852 error=0 03:25:20 Received message from Master: op=Filter serial=37853 03:25:20 Color wheel filter change from 0 to 0 03:25:20 FLIGetFilterPos err=0 currentPosition=0 03:25:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:20 Filter is already there-color wheel unchanged 03:25:20 Received message from Master: op=Shutter serial=37854 03:25:20 Shutter LASER close 03:25:20 Received message from Camera: op=State serial=37856 03:25:20 GetSingleValue result=40 Value=cccccccc 03:25:20 SkyScan query 03:25:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:25:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:21 Parameters OK 03:25:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:21 Set A/D data flow result=40 03:25:21 Set A/D channel type result=40 03:25:21 Set A/D encoding result=40 03:25:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:21 Set channel filter=0.000000e+000 result=40 03:25:21 Config A/D Result=40 03:25:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:21 Get A/D filter: -9.255963e+061 result=40 03:25:21 Get A/D value=-858993460 result=40 03:25:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:21 Parameters OK 03:25:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:21 Set A/D data flow result=40 03:25:21 Set A/D channel type result=40 03:25:21 Set A/D encoding result=40 03:25:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:21 Set channel filter=0.000000e+000 result=40 03:25:21 Config A/D Result=40 03:25:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:21 Get A/D filter: -9.255963e+061 result=40 03:25:21 Get A/D value=-858993460 result=40 03:25:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:21 Aux= 03:25:21 Message to Camera, serial 37856 queued 03:25:57 Received message from Master: op=PointingHead serial=37869 03:25:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:25:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:25:58 Point started: ret=0 03:25:58 point_skyscan result=0 03:25:58 Check angles 03:25:58 SkyScan query 03:25:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:25:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:25:59 Message to Master queued w/err=0: serial=37869 error=0 03:26:04 Received message from Master: op=Filter serial=37870 03:26:04 Color wheel filter change from 0 to 0 03:26:04 FLIGetFilterPos err=0 currentPosition=0 03:26:04 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:04 Filter is already there-color wheel unchanged 03:26:04 Received message from Master: op=Shutter serial=37871 03:26:04 Shutter LASER close 03:26:04 Received message from Camera: op=State serial=37873 03:26:04 GetSingleValue result=40 Value=cccccccc 03:26:04 SkyScan query 03:26:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:26:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:05 Parameters OK 03:26:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:05 Set A/D data flow result=40 03:26:05 Set A/D channel type result=40 03:26:05 Set A/D encoding result=40 03:26:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:05 Set channel filter=0.000000e+000 result=40 03:26:05 Config A/D Result=40 03:26:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:05 Get A/D filter: -9.255963e+061 result=40 03:26:05 Get A/D value=-858993460 result=40 03:26:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:05 Parameters OK 03:26:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:05 Set A/D data flow result=40 03:26:05 Set A/D channel type result=40 03:26:05 Set A/D encoding result=40 03:26:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:05 Set channel filter=0.000000e+000 result=40 03:26:05 Config A/D Result=40 03:26:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:05 Get A/D filter: -9.255963e+061 result=40 03:26:05 Get A/D value=-858993460 result=40 03:26:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:05 Aux= 03:26:05 Message to Camera, serial 37873 queued 03:26:41 Received message from Master: op=PointingHead serial=37885 03:26:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:26:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:26:41 Point started: ret=0 03:26:41 point_skyscan result=0 03:26:42 Check angles 03:26:42 SkyScan query 03:26:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:26:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:26:42 Message to Master queued w/err=0: serial=37885 error=0 03:26:47 Received message from Master: op=Filter serial=37886 03:26:47 Color wheel filter change from 0 to 0 03:26:47 FLIGetFilterPos err=0 currentPosition=0 03:26:47 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:47 Filter is already there-color wheel unchanged 03:26:48 Received message from Master: op=Shutter serial=37887 03:26:48 Shutter LASER close 03:26:48 Received message from Camera: op=State serial=37889 03:26:48 GetSingleValue result=40 Value=cccccccc 03:26:48 SkyScan query 03:26:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:26:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:48 Parameters OK 03:26:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:48 Set A/D data flow result=40 03:26:48 Set A/D channel type result=40 03:26:48 Set A/D encoding result=40 03:26:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:48 Set channel filter=0.000000e+000 result=40 03:26:48 Config A/D Result=40 03:26:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:48 Get A/D filter: -9.255963e+061 result=40 03:26:48 Get A/D value=-858993460 result=40 03:26:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:48 Parameters OK 03:26:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:48 Set A/D data flow result=40 03:26:48 Set A/D channel type result=40 03:26:48 Set A/D encoding result=40 03:26:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:48 Set channel filter=0.000000e+000 result=40 03:26:48 Config A/D Result=40 03:26:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:48 Get A/D filter: -9.255963e+061 result=40 03:26:48 Get A/D value=-858993460 result=40 03:26:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:48 Aux= 03:26:48 Message to Camera, serial 37889 queued 03:27:25 Received message from Master: op=PointingHead serial=37902 03:27:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:27:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:27:25 Point started: ret=0 03:27:25 point_skyscan result=0 03:27:26 Check angles 03:27:26 SkyScan query 03:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 03:27:27 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 03:27:27 Check angles 03:27:27 SkyScan query 03:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 03:27:27 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 03:27:28 Check angles 03:27:28 SkyScan query 03:27:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.31<-16354 Statuses=0008 0009 03:27:28 Msec=1500 True Az=112.995 Ze=-65.31 Az status=0008 Ze status=0009 03:27:28 Check angles 03:27:28 SkyScan query 03:27:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.28<-17752 Statuses=0008 0009 03:27:29 Msec=2250 True Az=112.995 Ze=-86.28 Az status=0008 Ze status=0009 03:27:29 Check angles 03:27:29 SkyScan query 03:27:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.22<-19148 Statuses=0008 0009 03:27:30 Msec=3000 True Az=112.995 Ze=-107.22 Az status=0008 Ze status=0009 03:27:30 Check angles 03:27:30 SkyScan query 03:27:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.175<-20545 Statuses=0008 0009 03:27:30 Msec=3750 True Az=112.995 Ze=-128.175 Az status=0008 Ze status=0009 03:27:31 Check angles 03:27:31 SkyScan query 03:27:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.145<-21943 Statuses=0008 0009 03:27:31 Msec=4500 True Az=112.995 Ze=-149.145 Az status=0008 Ze status=0009 03:27:31 Check angles 03:27:31 SkyScan query 03:27:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.07<-23338 Statuses=0008 0009 03:27:32 Msec=5250 True Az=112.995 Ze=-170.07 Az status=0008 Ze status=0009 03:27:32 Check angles 03:27:32 SkyScan query 03:27:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:27:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:27:33 Message to Master queued w/err=0: serial=37902 error=0 03:27:38 Received message from Master: op=Filter serial=37903 03:27:38 Color wheel filter change from 0 to 0 03:27:38 FLIGetFilterPos err=0 currentPosition=0 03:27:38 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:38 Filter is already there-color wheel unchanged 03:27:38 Received message from Master: op=Shutter serial=37904 03:27:38 Shutter LASER open 03:27:38 Received message from Camera: op=State serial=37906 03:27:38 GetSingleValue result=40 Value=cccccccc 03:27:38 SkyScan query 03:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:27:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:39 Parameters OK 03:27:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:39 Set A/D data flow result=40 03:27:39 Set A/D channel type result=40 03:27:39 Set A/D encoding result=40 03:27:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:39 Set channel filter=0.000000e+000 result=40 03:27:39 Config A/D Result=40 03:27:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:39 Get A/D filter: -9.255963e+061 result=40 03:27:39 Get A/D value=-858993460 result=40 03:27:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:39 Parameters OK 03:27:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:39 Set A/D data flow result=40 03:27:39 Set A/D channel type result=40 03:27:39 Set A/D encoding result=40 03:27:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:39 Set channel filter=0.000000e+000 result=40 03:27:39 Config A/D Result=40 03:27:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:39 Get A/D filter: -9.255963e+061 result=40 03:27:39 Get A/D value=-858993460 result=40 03:27:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:39 Aux= 03:27:39 Message to Camera, serial 37906 queued 03:27:47 Received message from Master: op=Shutter serial=37916 03:27:47 Shutter LASER close 03:27:48 Received message from Master: op=PointingHead serial=37920 03:27:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:27:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:27:48 Point started: ret=0 03:27:48 point_skyscan result=0 03:27:49 Check angles 03:27:49 SkyScan query 03:27:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 03:27:49 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 03:27:50 Check angles 03:27:50 SkyScan query 03:27:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 03:27:50 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 03:27:50 Check angles 03:27:50 SkyScan query 03:27:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 03:27:51 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 03:27:51 Check angles 03:27:51 SkyScan query 03:27:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.23<-17282 Statuses=0008 0009 03:27:52 Msec=2250 True Az=112.995 Ze=-79.23 Az status=0008 Ze status=0009 03:27:52 Check angles 03:27:52 SkyScan query 03:27:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.26<-15884 Statuses=0008 0009 03:27:52 Msec=3000 True Az=112.995 Ze=-58.26 Az status=0008 Ze status=0009 03:27:53 Check angles 03:27:53 SkyScan query 03:27:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.335<-14489 Statuses=0008 0009 03:27:53 Msec=3750 True Az=112.995 Ze=-37.335 Az status=0008 Ze status=0009 03:27:53 Check angles 03:27:53 SkyScan query 03:27:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.365<-13091 Statuses=0008 0009 03:27:54 Msec=4500 True Az=112.995 Ze=-16.365 Az status=0008 Ze status=0009 03:27:54 Check angles 03:27:54 SkyScan query 03:27:55 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 03:27:55 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 03:27:55 Check angles 03:27:55 SkyScan query 03:27:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:27:55 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:27:55 Message to Master queued w/err=0: serial=37920 error=0 03:28:00 Received message from Master: op=Filter serial=37921 03:28:00 Color wheel filter change from 0 to 0 03:28:00 FLIGetFilterPos err=0 currentPosition=0 03:28:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:00 Filter is already there-color wheel unchanged 03:28:01 Received message from Master: op=Shutter serial=37922 03:28:01 Shutter LASER close 03:28:01 Received message from Camera: op=State serial=37924 03:28:01 GetSingleValue result=40 Value=cccccccc 03:28:01 SkyScan query 03:28:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:28:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:01 Parameters OK 03:28:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:01 Set A/D data flow result=40 03:28:01 Set A/D channel type result=40 03:28:01 Set A/D encoding result=40 03:28:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:01 Set channel filter=0.000000e+000 result=40 03:28:01 Config A/D Result=40 03:28:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:01 Get A/D filter: -9.255963e+061 result=40 03:28:01 Get A/D value=-858993460 result=40 03:28:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:01 Parameters OK 03:28:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:01 Set A/D data flow result=40 03:28:01 Set A/D channel type result=40 03:28:01 Set A/D encoding result=40 03:28:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:01 Set channel filter=0.000000e+000 result=40 03:28:01 Config A/D Result=40 03:28:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:01 Get A/D filter: -9.255963e+061 result=40 03:28:01 Get A/D value=-858993460 result=40 03:28:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:01 Aux= 03:28:01 Message to Camera, serial 37924 queued 03:28:38 Received message from Master: op=PointingHead serial=37937 03:28:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:28:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:28:39 Point started: ret=0 03:28:39 point_skyscan result=0 03:28:39 Check angles 03:28:39 SkyScan query 03:28:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:28:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:28:40 Message to Master queued w/err=0: serial=37937 error=0 03:28:45 Received message from Master: op=Filter serial=37938 03:28:45 Color wheel filter change from 0 to 0 03:28:45 FLIGetFilterPos err=0 currentPosition=0 03:28:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:45 Filter is already there-color wheel unchanged 03:28:45 Received message from Master: op=Shutter serial=37939 03:28:45 Shutter LASER close 03:28:45 Received message from Camera: op=State serial=37941 03:28:45 GetSingleValue result=40 Value=cccccccc 03:28:45 SkyScan query 03:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:28:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:46 Parameters OK 03:28:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:46 Set A/D data flow result=40 03:28:46 Set A/D channel type result=40 03:28:46 Set A/D encoding result=40 03:28:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:46 Set channel filter=0.000000e+000 result=40 03:28:46 Config A/D Result=40 03:28:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:46 Get A/D filter: -9.255963e+061 result=40 03:28:46 Get A/D value=-858993460 result=40 03:28:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:46 Parameters OK 03:28:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:46 Set A/D data flow result=40 03:28:46 Set A/D channel type result=40 03:28:46 Set A/D encoding result=40 03:28:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:46 Set channel filter=0.000000e+000 result=40 03:28:46 Config A/D Result=40 03:28:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:46 Get A/D filter: -9.255963e+061 result=40 03:28:46 Get A/D value=-858993460 result=40 03:28:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:46 Aux= 03:28:46 Message to Camera, serial 37941 queued 03:29:22 Received message from Master: op=PointingHead serial=37954 03:29:22 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:29:22 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:29:23 Point started: ret=0 03:29:23 point_skyscan result=0 03:29:24 Check angles 03:29:24 SkyScan query 03:29:24 SkyScan query done: ret=0 az=136.005<-9067 ze=-6.495<-12433 Statuses=0009 0008 03:29:24 Msec=0 True Az=136.005 Ze=-6.495 Az status=0009 Ze status=0008 03:29:24 Check angles 03:29:24 SkyScan query 03:29:25 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.48<-12432 Statuses=0009 0008 03:29:25 Msec=750 True Az=153.93 Ze=-6.48 Az status=0009 Ze status=0008 03:29:25 Check angles 03:29:25 SkyScan query 03:29:26 SkyScan query done: ret=0 az=171.78<-11452 ze=-6.48<-12432 Statuses=0009 0008 03:29:26 Msec=1500 True Az=171.78 Ze=-6.48 Az status=0009 Ze status=0008 03:29:26 Check angles 03:29:26 SkyScan query 03:29:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:29:26 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 03:29:26 Message to Master queued w/err=0: serial=37954 error=0 03:29:31 Received message from Master: op=Filter serial=37955 03:29:31 Color wheel filter change from 0 to 0 03:29:31 FLIGetFilterPos err=0 currentPosition=0 03:29:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:31 Filter is already there-color wheel unchanged 03:29:32 Received message from Master: op=Shutter serial=37956 03:29:32 Shutter LASER close 03:29:32 Received message from Camera: op=State serial=37958 03:29:32 GetSingleValue result=40 Value=cccccccc 03:29:32 SkyScan query 03:29:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:29:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:32 Parameters OK 03:29:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:32 Set A/D data flow result=40 03:29:32 Set A/D channel type result=40 03:29:32 Set A/D encoding result=40 03:29:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:32 Set channel filter=0.000000e+000 result=40 03:29:32 Config A/D Result=40 03:29:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:32 Get A/D filter: -9.255963e+061 result=40 03:29:32 Get A/D value=-858993460 result=40 03:29:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:32 Parameters OK 03:29:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:32 Set A/D data flow result=40 03:29:32 Set A/D channel type result=40 03:29:32 Set A/D encoding result=40 03:29:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:32 Set channel filter=0.000000e+000 result=40 03:29:32 Config A/D Result=40 03:29:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:32 Get A/D filter: -9.255963e+061 result=40 03:29:32 Get A/D value=-858993460 result=40 03:29:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:32 Aux= 03:29:32 Message to Camera, serial 37958 queued 03:30:09 Received message from Master: op=PointingHead serial=37971 03:30:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:30:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:30:09 Point started: ret=0 03:30:09 point_skyscan result=0 03:30:10 Check angles 03:30:10 SkyScan query 03:30:11 SkyScan query done: ret=0 az=153.165<-10211 ze=6.51<-11566 Statuses=0009 0008 03:30:11 Msec=0 True Az=153.165 Ze=6.51 Az status=0009 Ze status=0008 03:30:11 Check angles 03:30:11 SkyScan query 03:30:11 SkyScan query done: ret=0 az=135.735<-9049 ze=6.495<-11567 Statuses=0009 0008 03:30:11 Msec=750 True Az=135.735 Ze=6.495 Az status=0009 Ze status=0008 03:30:12 Check angles 03:30:12 SkyScan query 03:30:12 SkyScan query done: ret=0 az=118.26<-7884 ze=6.495<-11567 Statuses=0009 0008 03:30:12 Msec=1500 True Az=118.26 Ze=6.495 Az status=0009 Ze status=0008 03:30:12 Check angles 03:30:12 SkyScan query 03:30:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:30:13 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:30:13 Message to Master queued w/err=0: serial=37971 error=0 03:30:18 Received message from Master: op=Filter serial=37972 03:30:18 Color wheel filter change from 0 to 0 03:30:18 FLIGetFilterPos err=0 currentPosition=0 03:30:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:18 Filter is already there-color wheel unchanged 03:30:18 Received message from Master: op=Shutter serial=37973 03:30:18 Shutter LASER close 03:30:18 Received message from Camera: op=State serial=37975 03:30:18 GetSingleValue result=40 Value=cccccccc 03:30:18 SkyScan query 03:30:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:30:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:19 Parameters OK 03:30:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:19 Set A/D data flow result=40 03:30:19 Set A/D channel type result=40 03:30:19 Set A/D encoding result=40 03:30:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:19 Set channel filter=0.000000e+000 result=40 03:30:19 Config A/D Result=40 03:30:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:19 Get A/D filter: -9.255963e+061 result=40 03:30:19 Get A/D value=-858993460 result=40 03:30:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:19 Parameters OK 03:30:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:19 Set A/D data flow result=40 03:30:19 Set A/D channel type result=40 03:30:19 Set A/D encoding result=40 03:30:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:19 Set channel filter=0.000000e+000 result=40 03:30:19 Config A/D Result=40 03:30:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:19 Get A/D filter: -9.255963e+061 result=40 03:30:19 Get A/D value=-858993460 result=40 03:30:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:19 Aux= 03:30:19 Message to Camera, serial 37975 queued 03:30:56 Received message from Master: op=PointingHead serial=37988 03:30:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:30:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:30:56 Point started: ret=0 03:30:56 point_skyscan result=0 03:30:57 Check angles 03:30:57 SkyScan query 03:30:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.76<-13584 Statuses=0008 0009 03:30:57 Msec=0 True Az=112.995 Ze=-23.76 Az status=0008 Ze status=0009 03:30:57 Check angles 03:30:57 SkyScan query 03:30:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 03:30:58 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 03:30:58 Check angles 03:30:58 SkyScan query 03:30:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.655<-16377 Statuses=0008 0009 03:30:59 Msec=1500 True Az=112.995 Ze=-65.655 Az status=0008 Ze status=0009 03:30:59 Check angles 03:30:59 SkyScan query 03:30:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 03:30:59 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 03:31:00 Check angles 03:31:00 SkyScan query 03:31:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.565<-19171 Statuses=0008 0009 03:31:00 Msec=3000 True Az=112.995 Ze=-107.565 Az status=0008 Ze status=0009 03:31:00 Check angles 03:31:00 SkyScan query 03:31:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.505<-20567 Statuses=0008 0009 03:31:01 Msec=3750 True Az=112.995 Ze=-128.505 Az status=0008 Ze status=0009 03:31:01 Check angles 03:31:01 SkyScan query 03:31:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.91<-21994 Statuses=0008 0009 03:31:02 Msec=4500 True Az=112.995 Ze=-149.91 Az status=0008 Ze status=0009 03:31:02 Check angles 03:31:02 SkyScan query 03:31:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.79<-23386 Statuses=0008 0009 03:31:02 Msec=5250 True Az=112.995 Ze=-170.79 Az status=0008 Ze status=0009 03:31:03 Check angles 03:31:03 SkyScan query 03:31:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:31:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:31:03 Message to Master queued w/err=0: serial=37988 error=0 03:31:08 Received message from Master: op=Filter serial=37989 03:31:08 Color wheel filter change from 0 to 0 03:31:08 FLIGetFilterPos err=0 currentPosition=0 03:31:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:08 Filter is already there-color wheel unchanged 03:31:08 Received message from Master: op=Shutter serial=37990 03:31:08 Shutter LASER open 03:31:09 Received message from Camera: op=State serial=37992 03:31:09 GetSingleValue result=40 Value=cccccccc 03:31:09 SkyScan query 03:31:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:31:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:09 Parameters OK 03:31:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:09 Set A/D data flow result=40 03:31:09 Set A/D channel type result=40 03:31:09 Set A/D encoding result=40 03:31:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:09 Set channel filter=0.000000e+000 result=40 03:31:09 Config A/D Result=40 03:31:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:09 Get A/D filter: -9.255963e+061 result=40 03:31:09 Get A/D value=-858993460 result=40 03:31:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:09 Parameters OK 03:31:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:09 Set A/D data flow result=40 03:31:09 Set A/D channel type result=40 03:31:09 Set A/D encoding result=40 03:31:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:09 Set channel filter=0.000000e+000 result=40 03:31:09 Config A/D Result=40 03:31:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:09 Get A/D filter: -9.255963e+061 result=40 03:31:09 Get A/D value=-858993460 result=40 03:31:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:09 Aux= 03:31:09 Message to Camera, serial 37992 queued 03:31:18 Received message from Master: op=Shutter serial=38002 03:31:18 Shutter LASER close 03:31:18 Received message from Master: op=PointingHead serial=38006 03:31:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:31:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:31:18 Point started: ret=0 03:31:18 point_skyscan result=0 03:31:19 Check angles 03:31:19 SkyScan query 03:31:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 03:31:20 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 03:31:20 Check angles 03:31:20 SkyScan query 03:31:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 03:31:20 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 03:31:21 Check angles 03:31:21 SkyScan query 03:31:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 03:31:21 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 03:31:21 Check angles 03:31:21 SkyScan query 03:31:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 03:31:22 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 03:31:22 Check angles 03:31:22 SkyScan query 03:31:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.13<-15942 Statuses=0008 0009 03:31:23 Msec=3000 True Az=112.995 Ze=-59.13 Az status=0008 Ze status=0009 03:31:23 Check angles 03:31:23 SkyScan query 03:31:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 03:31:23 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 03:31:24 Check angles 03:31:24 SkyScan query 03:31:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 03:31:24 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 03:31:24 Check angles 03:31:24 SkyScan query 03:31:25 SkyScan query done: ret=0 az=112.995<-7533 ze=3.765<-11749 Statuses=0008 0009 03:31:25 Msec=5250 True Az=112.995 Ze=3.765 Az status=0008 Ze status=0009 03:31:25 Check angles 03:31:25 SkyScan query 03:31:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:31:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:31:26 Message to Master queued w/err=0: serial=38006 error=0 03:31:31 Received message from Master: op=Filter serial=38007 03:31:31 Color wheel filter change from 0 to 0 03:31:31 FLIGetFilterPos err=0 currentPosition=0 03:31:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:31 Filter is already there-color wheel unchanged 03:31:31 Received message from Master: op=Shutter serial=38008 03:31:31 Shutter LASER close 03:31:31 Received message from Camera: op=State serial=38010 03:31:31 GetSingleValue result=40 Value=cccccccc 03:31:31 SkyScan query 03:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:31:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:32 Parameters OK 03:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:32 Set A/D data flow result=40 03:31:32 Set A/D channel type result=40 03:31:32 Set A/D encoding result=40 03:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:32 Set channel filter=0.000000e+000 result=40 03:31:32 Config A/D Result=40 03:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:32 Get A/D filter: -9.255963e+061 result=40 03:31:32 Get A/D value=-858993460 result=40 03:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:32 Parameters OK 03:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:32 Set A/D data flow result=40 03:31:32 Set A/D channel type result=40 03:31:32 Set A/D encoding result=40 03:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:32 Set channel filter=0.000000e+000 result=40 03:31:32 Config A/D Result=40 03:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:32 Get A/D filter: -9.255963e+061 result=40 03:31:32 Get A/D value=-858993460 result=40 03:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:32 Aux= 03:31:32 Message to Camera, serial 38010 queued 03:32:09 Received message from Master: op=PointingHead serial=38023 03:32:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:32:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:32:09 Point started: ret=0 03:32:09 point_skyscan result=0 03:32:10 Check angles 03:32:10 SkyScan query 03:32:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:32:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:32:10 Message to Master queued w/err=0: serial=38023 error=0 03:32:15 Received message from Master: op=Filter serial=38024 03:32:15 Color wheel filter change from 0 to 0 03:32:15 FLIGetFilterPos err=0 currentPosition=0 03:32:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:15 Filter is already there-color wheel unchanged 03:32:15 Received message from Master: op=Shutter serial=38025 03:32:15 Shutter LASER close 03:32:15 Received message from Camera: op=State serial=38027 03:32:15 GetSingleValue result=40 Value=cccccccc 03:32:15 SkyScan query 03:32:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:32:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:16 Parameters OK 03:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:16 Set A/D data flow result=40 03:32:16 Set A/D channel type result=40 03:32:16 Set A/D encoding result=40 03:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:16 Set channel filter=0.000000e+000 result=40 03:32:16 Config A/D Result=40 03:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:16 Get A/D filter: -9.255963e+061 result=40 03:32:16 Get A/D value=-858993460 result=40 03:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:16 Parameters OK 03:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:16 Set A/D data flow result=40 03:32:16 Set A/D channel type result=40 03:32:16 Set A/D encoding result=40 03:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:16 Set channel filter=0.000000e+000 result=40 03:32:16 Config A/D Result=40 03:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:16 Get A/D filter: -9.255963e+061 result=40 03:32:16 Get A/D value=-858993460 result=40 03:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:16 Aux= 03:32:16 Message to Camera, serial 38027 queued 03:32:53 Received message from Master: op=PointingHead serial=38040 03:32:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:32:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:32:53 Point started: ret=0 03:32:53 point_skyscan result=0 03:32:54 Check angles 03:32:54 SkyScan query 03:32:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:32:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:32:55 Message to Master queued w/err=0: serial=38040 error=0 03:33:00 Received message from Master: op=Filter serial=38041 03:33:00 Color wheel filter change from 0 to 0 03:33:00 FLIGetFilterPos err=0 currentPosition=0 03:33:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:00 Filter is already there-color wheel unchanged 03:33:00 Received message from Master: op=Shutter serial=38042 03:33:00 Shutter LASER close 03:33:00 Received message from Camera: op=State serial=38044 03:33:00 GetSingleValue result=40 Value=cccccccc 03:33:00 SkyScan query 03:33:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:33:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:00 Parameters OK 03:33:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:00 Set A/D data flow result=40 03:33:00 Set A/D channel type result=40 03:33:00 Set A/D encoding result=40 03:33:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:00 Set channel filter=0.000000e+000 result=40 03:33:00 Config A/D Result=40 03:33:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:00 Get A/D filter: -9.255963e+061 result=40 03:33:00 Get A/D value=-858993460 result=40 03:33:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:00 Parameters OK 03:33:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:00 Set A/D data flow result=40 03:33:00 Set A/D channel type result=40 03:33:00 Set A/D encoding result=40 03:33:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:00 Set channel filter=0.000000e+000 result=40 03:33:00 Config A/D Result=40 03:33:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:00 Get A/D filter: -9.255963e+061 result=40 03:33:00 Get A/D value=-858993460 result=40 03:33:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:00 Aux= 03:33:00 Message to Camera, serial 38044 queued 03:33:37 Received message from Master: op=PointingHead serial=38057 03:33:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:33:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:33:37 Point started: ret=0 03:33:37 point_skyscan result=0 03:33:38 Received message from Master: op=Identify serial=38058 03:33:38 Check angles 03:33:38 SkyScan query 03:33:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:33:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:33:39 Message to Master queued w/err=0: serial=38057 error=0 03:33:44 Received message from Master: op=Filter serial=38061 03:33:44 Color wheel filter change from 0 to 0 03:33:44 FLIGetFilterPos err=0 currentPosition=0 03:33:44 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:44 Filter is already there-color wheel unchanged 03:33:44 Received message from Master: op=Shutter serial=38062 03:33:44 Shutter LASER close 03:33:44 Received message from Camera: op=State serial=38064 03:33:44 GetSingleValue result=40 Value=cccccccc 03:33:44 SkyScan query 03:33:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:33:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:45 Parameters OK 03:33:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:45 Set A/D data flow result=40 03:33:45 Set A/D channel type result=40 03:33:45 Set A/D encoding result=40 03:33:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:45 Set channel filter=0.000000e+000 result=40 03:33:45 Config A/D Result=40 03:33:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:45 Get A/D filter: -9.255963e+061 result=40 03:33:45 Get A/D value=-858993460 result=40 03:33:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:45 Parameters OK 03:33:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:45 Set A/D data flow result=40 03:33:45 Set A/D channel type result=40 03:33:45 Set A/D encoding result=40 03:33:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:45 Set channel filter=0.000000e+000 result=40 03:33:45 Config A/D Result=40 03:33:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:45 Get A/D filter: -9.255963e+061 result=40 03:33:45 Get A/D value=-858993460 result=40 03:33:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:45 Aux= 03:33:45 Message to Camera, serial 38064 queued 03:34:21 Received message from Master: op=PointingHead serial=38077 03:34:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:34:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:34:22 Point started: ret=0 03:34:22 point_skyscan result=0 03:34:23 Check angles 03:34:23 SkyScan query 03:34:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 03:34:23 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 03:34:23 Check angles 03:34:23 SkyScan query [UTC 2019-3-1 03:34:24] 03:34:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 03:34:24 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 03:34:24 Check angles 03:34:24 SkyScan query 03:34:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.685<-16379 Statuses=0008 0009 03:34:25 Msec=1500 True Az=112.995 Ze=-65.685 Az status=0008 Ze status=0009 03:34:25 Check angles 03:34:25 SkyScan query 03:34:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 03:34:25 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 03:34:26 Check angles 03:34:26 SkyScan query 03:34:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.595<-19173 Statuses=0008 0009 03:34:26 Msec=3000 True Az=112.995 Ze=-107.595 Az status=0008 Ze status=0009 03:34:26 Check angles 03:34:26 SkyScan query 03:34:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.535<-20569 Statuses=0008 0009 03:34:27 Msec=3750 True Az=112.995 Ze=-128.535 Az status=0008 Ze status=0009 03:34:27 Check angles 03:34:27 SkyScan query 03:34:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.505<-21967 Statuses=0008 0009 03:34:28 Msec=4500 True Az=112.995 Ze=-149.505 Az status=0008 Ze status=0009 03:34:28 Check angles 03:34:28 SkyScan query 03:34:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.43<-23362 Statuses=0008 0009 03:34:28 Msec=5250 True Az=112.995 Ze=-170.43 Az status=0008 Ze status=0009 03:34:29 Check angles 03:34:29 SkyScan query 03:34:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:34:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:34:29 Message to Master queued w/err=0: serial=38077 error=0 03:34:34 Received message from Master: op=Filter serial=38078 03:34:34 Color wheel filter change from 0 to 0 03:34:34 FLIGetFilterPos err=0 currentPosition=0 03:34:34 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:34 Filter is already there-color wheel unchanged 03:34:34 Received message from Master: op=Shutter serial=38079 03:34:34 Shutter LASER open 03:34:34 Received message from Camera: op=State serial=38081 03:34:34 GetSingleValue result=40 Value=cccccccc 03:34:34 SkyScan query 03:34:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:34:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:35 Parameters OK 03:34:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:35 Set A/D data flow result=40 03:34:35 Set A/D channel type result=40 03:34:35 Set A/D encoding result=40 03:34:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:35 Set channel filter=0.000000e+000 result=40 03:34:35 Config A/D Result=40 03:34:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:35 Get A/D filter: -9.255963e+061 result=40 03:34:35 Get A/D value=-858993460 result=40 03:34:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:35 Parameters OK 03:34:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:35 Set A/D data flow result=40 03:34:35 Set A/D channel type result=40 03:34:35 Set A/D encoding result=40 03:34:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:35 Set channel filter=0.000000e+000 result=40 03:34:35 Config A/D Result=40 03:34:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:35 Get A/D filter: -9.255963e+061 result=40 03:34:35 Get A/D value=-858993460 result=40 03:34:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:35 Aux= 03:34:35 Message to Camera, serial 38081 queued 03:34:43 Received message from Master: op=Shutter serial=38091 03:34:43 Shutter LASER close 03:34:44 Received message from Master: op=PointingHead serial=38095 03:34:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:34:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:34:44 Point started: ret=0 03:34:44 point_skyscan result=0 03:34:45 Check angles 03:34:45 SkyScan query 03:34:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 03:34:46 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 03:34:46 Check angles 03:34:46 SkyScan query 03:34:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.68<-20112 Statuses=0008 0009 03:34:46 Msec=750 True Az=112.995 Ze=-121.68 Az status=0008 Ze status=0009 03:34:47 Check angles 03:34:47 SkyScan query 03:34:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 03:34:47 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 03:34:47 Check angles 03:34:47 SkyScan query 03:34:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.77<-17318 Statuses=0008 0009 03:34:48 Msec=2250 True Az=112.995 Ze=-79.77 Az status=0008 Ze status=0009 03:34:48 Check angles 03:34:48 SkyScan query 03:34:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 03:34:49 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 03:34:49 Check angles 03:34:49 SkyScan query 03:34:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 03:34:49 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 03:34:50 Check angles 03:34:50 SkyScan query 03:34:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 03:34:50 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 03:34:50 Check angles 03:34:50 SkyScan query 03:34:51 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 03:34:51 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 03:34:51 Check angles 03:34:51 SkyScan query 03:34:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:34:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:34:52 Message to Master queued w/err=0: serial=38095 error=0 03:34:57 Received message from Master: op=Filter serial=38096 03:34:57 Color wheel filter change from 0 to 0 03:34:57 FLIGetFilterPos err=0 currentPosition=0 03:34:57 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:57 Filter is already there-color wheel unchanged 03:34:57 Received message from Master: op=Shutter serial=38097 03:34:57 Shutter LASER close 03:34:57 Received message from Camera: op=State serial=38099 03:34:57 GetSingleValue result=40 Value=cccccccc 03:34:57 SkyScan query 03:34:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:34:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:58 Parameters OK 03:34:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:58 Set A/D data flow result=40 03:34:58 Set A/D channel type result=40 03:34:58 Set A/D encoding result=40 03:34:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:58 Set channel filter=0.000000e+000 result=40 03:34:58 Config A/D Result=40 03:34:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:58 Get A/D filter: -9.255963e+061 result=40 03:34:58 Get A/D value=-858993460 result=40 03:34:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:58 Parameters OK 03:34:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:58 Set A/D data flow result=40 03:34:58 Set A/D channel type result=40 03:34:58 Set A/D encoding result=40 03:34:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:58 Set channel filter=0.000000e+000 result=40 03:34:58 Config A/D Result=40 03:34:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:58 Get A/D filter: -9.255963e+061 result=40 03:34:58 Get A/D value=-858993460 result=40 03:34:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:58 Aux= 03:34:58 Message to Camera, serial 38099 queued 03:35:34 Received message from Master: op=PointingHead serial=38112 03:35:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:35:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:35:35 Point started: ret=0 03:35:35 point_skyscan result=0 03:35:36 Check angles 03:35:36 SkyScan query 03:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:35:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:35:36 Message to Master queued w/err=0: serial=38112 error=0 03:35:41 Received message from Master: op=Filter serial=38113 03:35:41 Color wheel filter change from 0 to 0 03:35:41 FLIGetFilterPos err=0 currentPosition=0 03:35:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:35:41 Filter is already there-color wheel unchanged 03:35:41 Received message from Master: op=Shutter serial=38114 03:35:41 Shutter LASER close 03:35:41 Received message from Camera: op=State serial=38116 03:35:41 GetSingleValue result=40 Value=cccccccc 03:35:41 SkyScan query 03:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.48<-11568 Statuses=0008 0008 03:35:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:42 Parameters OK 03:35:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:42 Set A/D data flow result=40 03:35:42 Set A/D channel type result=40 03:35:42 Set A/D encoding result=40 03:35:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:42 Set channel filter=0.000000e+000 result=40 03:35:42 Config A/D Result=40 03:35:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:42 Get A/D filter: -9.255963e+061 result=40 03:35:42 Get A/D value=-858993460 result=40 03:35:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:42 Parameters OK 03:35:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:42 Set A/D data flow result=40 03:35:42 Set A/D channel type result=40 03:35:42 Set A/D encoding result=40 03:35:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:42 Set channel filter=0.000000e+000 result=40 03:35:42 Config A/D Result=40 03:35:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:42 Get A/D filter: -9.255963e+061 result=40 03:35:42 Get A/D value=-858993460 result=40 03:35:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:35:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:35:42 Aux= 03:35:42 Message to Camera, serial 38116 queued 03:36:19 Received message from Master: op=PointingHead serial=38129 03:36:19 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:36:19 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:36:19 Point started: ret=0 03:36:19 point_skyscan result=0 03:36:20 Check angles 03:36:20 SkyScan query 03:36:20 SkyScan query done: ret=0 az=135.99<-9066 ze=-6.495<-12433 Statuses=0009 0008 03:36:20 Msec=0 True Az=135.99 Ze=-6.495 Az status=0009 Ze status=0008 03:36:21 Check angles 03:36:21 SkyScan query 03:36:21 SkyScan query done: ret=0 az=153.405<-10227 ze=-6.48<-12432 Statuses=0009 0008 03:36:21 Msec=750 True Az=153.405 Ze=-6.48 Az status=0009 Ze status=0008 03:36:21 Check angles 03:36:21 SkyScan query 03:36:22 SkyScan query done: ret=0 az=170.955<-11397 ze=-6.48<-12432 Statuses=0009 0008 03:36:22 Msec=1500 True Az=170.955 Ze=-6.48 Az status=0009 Ze status=0008 03:36:22 Check angles 03:36:22 SkyScan query 03:36:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:36:23 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 03:36:23 Message to Master queued w/err=0: serial=38129 error=0 03:36:28 Received message from Master: op=Filter serial=38130 03:36:28 Color wheel filter change from 0 to 0 03:36:28 FLIGetFilterPos err=0 currentPosition=0 03:36:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:28 Filter is already there-color wheel unchanged 03:36:28 Received message from Master: op=Shutter serial=38131 03:36:28 Shutter LASER close 03:36:28 Received message from Camera: op=State serial=38133 03:36:28 GetSingleValue result=40 Value=cccccccc 03:36:28 SkyScan query 03:36:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:36:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:28 Parameters OK 03:36:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:28 Set A/D data flow result=40 03:36:28 Set A/D channel type result=40 03:36:28 Set A/D encoding result=40 03:36:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:28 Set channel filter=0.000000e+000 result=40 03:36:28 Config A/D Result=40 03:36:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:28 Get A/D filter: -9.255963e+061 result=40 03:36:28 Get A/D value=-858993460 result=40 03:36:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:28 Parameters OK 03:36:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:28 Set A/D data flow result=40 03:36:28 Set A/D channel type result=40 03:36:28 Set A/D encoding result=40 03:36:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:28 Set channel filter=0.000000e+000 result=40 03:36:28 Config A/D Result=40 03:36:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:28 Get A/D filter: -9.255963e+061 result=40 03:36:28 Get A/D value=-858993460 result=40 03:36:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:28 Aux= 03:36:28 Message to Camera, serial 38133 queued 03:37:04 Received message from Master: op=PointingHead serial=38145 03:37:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:37:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:37:05 Point started: ret=0 03:37:05 point_skyscan result=0 03:37:06 Check angles 03:37:06 SkyScan query 03:37:06 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 03:37:06 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 03:37:06 Check angles 03:37:06 SkyScan query 03:37:07 SkyScan query done: ret=0 az=135.195<-9013 ze=6.495<-11567 Statuses=0009 0008 03:37:07 Msec=750 True Az=135.195 Ze=6.495 Az status=0009 Ze status=0008 03:37:07 Check angles 03:37:07 SkyScan query 03:37:08 SkyScan query done: ret=0 az=117.27<-7818 ze=6.495<-11567 Statuses=0009 0008 03:37:08 Msec=1500 True Az=117.27 Ze=6.495 Az status=0009 Ze status=0008 03:37:08 Check angles 03:37:08 SkyScan query 03:37:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:37:08 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:37:08 Message to Master queued w/err=0: serial=38145 error=0 03:37:13 Received message from Master: op=Filter serial=38146 03:37:13 Color wheel filter change from 0 to 0 03:37:13 FLIGetFilterPos err=0 currentPosition=0 03:37:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:13 Filter is already there-color wheel unchanged 03:37:14 Received message from Master: op=Shutter serial=38147 03:37:14 Shutter LASER close 03:37:14 Received message from Camera: op=State serial=38149 03:37:14 GetSingleValue result=40 Value=cccccccc 03:37:14 SkyScan query 03:37:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:37:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:14 Parameters OK 03:37:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:14 Set A/D data flow result=40 03:37:14 Set A/D channel type result=40 03:37:14 Set A/D encoding result=40 03:37:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:14 Set channel filter=0.000000e+000 result=40 03:37:14 Config A/D Result=40 03:37:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:14 Get A/D filter: -9.255963e+061 result=40 03:37:14 Get A/D value=-858993460 result=40 03:37:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:14 Parameters OK 03:37:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:14 Set A/D data flow result=40 03:37:14 Set A/D channel type result=40 03:37:14 Set A/D encoding result=40 03:37:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:14 Set channel filter=0.000000e+000 result=40 03:37:14 Config A/D Result=40 03:37:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:14 Get A/D filter: -9.255963e+061 result=40 03:37:14 Get A/D value=-858993460 result=40 03:37:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:14 Aux= 03:37:14 Message to Camera, serial 38149 queued 03:37:51 Received message from Master: op=PointingHead serial=38162 03:37:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:37:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:37:51 Point started: ret=0 03:37:51 point_skyscan result=0 03:37:52 Check angles 03:37:52 SkyScan query 03:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 03:37:53 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 03:37:53 Check angles 03:37:53 SkyScan query 03:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 03:37:53 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 03:37:54 Check angles 03:37:54 SkyScan query 03:37:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 03:37:54 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 03:37:54 Check angles 03:37:54 SkyScan query 03:37:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 03:37:55 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 03:37:55 Check angles 03:37:55 SkyScan query 03:37:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.385<-19159 Statuses=0008 0009 03:37:56 Msec=3000 True Az=112.995 Ze=-107.385 Az status=0008 Ze status=0009 03:37:56 Check angles 03:37:56 SkyScan query 03:37:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.325<-20555 Statuses=0008 0009 03:37:56 Msec=3750 True Az=112.995 Ze=-128.325 Az status=0008 Ze status=0009 03:37:57 Check angles 03:37:57 SkyScan query 03:37:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.295<-21953 Statuses=0008 0009 03:37:57 Msec=4500 True Az=112.995 Ze=-149.295 Az status=0008 Ze status=0009 03:37:57 Check angles 03:37:57 SkyScan query 03:37:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 03:37:58 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 03:37:58 Check angles 03:37:58 SkyScan query 03:37:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:37:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:37:59 Message to Master queued w/err=0: serial=38162 error=0 03:38:04 Received message from Master: op=Filter serial=38163 03:38:04 Color wheel filter change from 0 to 0 03:38:04 FLIGetFilterPos err=0 currentPosition=0 03:38:04 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:04 Filter is already there-color wheel unchanged 03:38:04 Received message from Master: op=Shutter serial=38164 03:38:04 Shutter LASER open 03:38:04 Received message from Camera: op=State serial=38166 03:38:04 GetSingleValue result=40 Value=cccccccc 03:38:04 SkyScan query 03:38:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:38:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:05 Parameters OK 03:38:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:05 Set A/D data flow result=40 03:38:05 Set A/D channel type result=40 03:38:05 Set A/D encoding result=40 03:38:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:05 Set channel filter=0.000000e+000 result=40 03:38:05 Config A/D Result=40 03:38:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:05 Get A/D filter: -9.255963e+061 result=40 03:38:05 Get A/D value=-858993460 result=40 03:38:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:05 Parameters OK 03:38:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:05 Set A/D data flow result=40 03:38:05 Set A/D channel type result=40 03:38:05 Set A/D encoding result=40 03:38:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:05 Set channel filter=0.000000e+000 result=40 03:38:05 Config A/D Result=40 03:38:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:05 Get A/D filter: -9.255963e+061 result=40 03:38:05 Get A/D value=-858993460 result=40 03:38:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:05 Aux= 03:38:05 Message to Camera, serial 38166 queued 03:38:13 Received message from Master: op=Shutter serial=38176 03:38:13 Shutter LASER close 03:38:13 Received message from Master: op=PointingHead serial=38180 03:38:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:38:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:38:14 Point started: ret=0 03:38:14 point_skyscan result=0 03:38:15 Check angles 03:38:15 SkyScan query 03:38:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 03:38:15 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 03:38:15 Check angles 03:38:15 SkyScan query 03:38:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.43<-20162 Statuses=0008 0009 03:38:16 Msec=750 True Az=112.995 Ze=-122.43 Az status=0008 Ze status=0009 03:38:16 Check angles 03:38:16 SkyScan query 03:38:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 03:38:17 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 03:38:17 Check angles 03:38:17 SkyScan query 03:38:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.505<-17367 Statuses=0008 0009 03:38:17 Msec=2250 True Az=112.995 Ze=-80.505 Az status=0008 Ze status=0009 03:38:18 Check angles 03:38:18 SkyScan query 03:38:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.55<-15970 Statuses=0008 0009 03:38:18 Msec=3000 True Az=112.995 Ze=-59.55 Az status=0008 Ze status=0009 03:38:18 Check angles 03:38:18 SkyScan query 03:38:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.595<-14573 Statuses=0008 0009 03:38:19 Msec=3750 True Az=112.995 Ze=-38.595 Az status=0008 Ze status=0009 03:38:19 Check angles 03:38:19 SkyScan query 03:38:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.625<-13175 Statuses=0008 0009 03:38:20 Msec=4500 True Az=112.995 Ze=-17.625 Az status=0008 Ze status=0009 03:38:20 Check angles 03:38:20 SkyScan query 03:38:20 SkyScan query done: ret=0 az=112.995<-7533 ze=3.315<-11779 Statuses=0008 0009 03:38:20 Msec=5250 True Az=112.995 Ze=3.315 Az status=0008 Ze status=0009 03:38:21 Check angles 03:38:21 SkyScan query 03:38:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:38:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:38:21 Message to Master queued w/err=0: serial=38180 error=0 03:38:26 Received message from Master: op=Filter serial=38181 03:38:26 Color wheel filter change from 0 to 0 03:38:26 FLIGetFilterPos err=0 currentPosition=0 03:38:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:26 Filter is already there-color wheel unchanged 03:38:26 Received message from Master: op=Shutter serial=38182 03:38:26 Shutter LASER close 03:38:26 Received message from Camera: op=State serial=38184 03:38:26 GetSingleValue result=40 Value=cccccccc 03:38:26 SkyScan query 03:38:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:38:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:27 Parameters OK 03:38:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:27 Set A/D data flow result=40 03:38:27 Set A/D channel type result=40 03:38:27 Set A/D encoding result=40 03:38:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:27 Set channel filter=0.000000e+000 result=40 03:38:27 Config A/D Result=40 03:38:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:27 Get A/D filter: -9.255963e+061 result=40 03:38:27 Get A/D value=-858993460 result=40 03:38:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:27 Parameters OK 03:38:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:27 Set A/D data flow result=40 03:38:27 Set A/D channel type result=40 03:38:27 Set A/D encoding result=40 03:38:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:27 Set channel filter=0.000000e+000 result=40 03:38:27 Config A/D Result=40 03:38:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:27 Get A/D filter: -9.255963e+061 result=40 03:38:27 Get A/D value=-858993460 result=40 03:38:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:27 Aux= 03:38:27 Message to Camera, serial 38184 queued 03:39:04 Received message from Master: op=PointingHead serial=38197 03:39:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:39:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:39:04 Point started: ret=0 03:39:04 point_skyscan result=0 03:39:05 Check angles 03:39:05 SkyScan query 03:39:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:39:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:39:06 Message to Master queued w/err=0: serial=38197 error=0 03:39:11 Received message from Master: op=Filter serial=38198 03:39:11 Color wheel filter change from 0 to 0 03:39:11 FLIGetFilterPos err=0 currentPosition=0 03:39:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:11 Filter is already there-color wheel unchanged 03:39:11 Received message from Master: op=Shutter serial=38199 03:39:11 Shutter LASER close 03:39:11 Received message from Camera: op=State serial=38201 03:39:11 GetSingleValue result=40 Value=cccccccc 03:39:11 SkyScan query 03:39:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:39:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:11 Parameters OK 03:39:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:11 Set A/D data flow result=40 03:39:11 Set A/D channel type result=40 03:39:11 Set A/D encoding result=40 03:39:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:11 Set channel filter=0.000000e+000 result=40 03:39:11 Config A/D Result=40 03:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:11 Get A/D filter: -9.255963e+061 result=40 03:39:11 Get A/D value=-858993460 result=40 03:39:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:11 Parameters OK 03:39:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:11 Set A/D data flow result=40 03:39:11 Set A/D channel type result=40 03:39:11 Set A/D encoding result=40 03:39:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:11 Set channel filter=0.000000e+000 result=40 03:39:11 Config A/D Result=40 03:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:11 Get A/D filter: -9.255963e+061 result=40 03:39:11 Get A/D value=-858993460 result=40 03:39:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:11 Aux= 03:39:11 Message to Camera, serial 38201 queued 03:39:48 Received message from Master: op=PointingHead serial=38214 03:39:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:39:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:39:48 Point started: ret=0 03:39:48 point_skyscan result=0 03:39:49 Check angles 03:39:49 SkyScan query 03:39:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:39:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:39:50 Message to Master queued w/err=0: serial=38214 error=0 03:39:55 Received message from Master: op=Filter serial=38215 03:39:55 Color wheel filter change from 0 to 0 03:39:55 FLIGetFilterPos err=0 currentPosition=0 03:39:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:55 Filter is already there-color wheel unchanged 03:39:55 Received message from Master: op=Shutter serial=38216 03:39:55 Shutter LASER close 03:39:55 Received message from Camera: op=State serial=38218 03:39:55 GetSingleValue result=40 Value=cccccccc 03:39:55 SkyScan query 03:39:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:39:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:56 Parameters OK 03:39:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:56 Set A/D data flow result=40 03:39:56 Set A/D channel type result=40 03:39:56 Set A/D encoding result=40 03:39:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:56 Set channel filter=0.000000e+000 result=40 03:39:56 Config A/D Result=40 03:39:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:56 Get A/D filter: -9.255963e+061 result=40 03:39:56 Get A/D value=-858993460 result=40 03:39:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:56 Parameters OK 03:39:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:56 Set A/D data flow result=40 03:39:56 Set A/D channel type result=40 03:39:56 Set A/D encoding result=40 03:39:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:56 Set channel filter=0.000000e+000 result=40 03:39:56 Config A/D Result=40 03:39:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:56 Get A/D filter: -9.255963e+061 result=40 03:39:56 Get A/D value=-858993460 result=40 03:39:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:56 Aux= 03:39:56 Message to Camera, serial 38218 queued 03:40:32 Received message from Master: op=PointingHead serial=38231 03:40:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:40:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:40:33 Point started: ret=0 03:40:33 point_skyscan result=0 03:40:34 Check angles 03:40:34 SkyScan query 03:40:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:40:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:40:34 Message to Master queued w/err=0: serial=38231 error=0 03:40:39 Received message from Master: op=Filter serial=38232 03:40:39 Color wheel filter change from 0 to 0 03:40:39 FLIGetFilterPos err=0 currentPosition=0 03:40:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:39 Filter is already there-color wheel unchanged 03:40:39 Received message from Master: op=Shutter serial=38233 03:40:39 Shutter LASER close 03:40:39 Received message from Camera: op=State serial=38235 03:40:39 GetSingleValue result=40 Value=cccccccc 03:40:39 SkyScan query 03:40:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:40:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:40 Parameters OK 03:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:40 Set A/D data flow result=40 03:40:40 Set A/D channel type result=40 03:40:40 Set A/D encoding result=40 03:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:40 Set channel filter=0.000000e+000 result=40 03:40:40 Config A/D Result=40 03:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:40 Get A/D filter: -9.255963e+061 result=40 03:40:40 Get A/D value=-858993460 result=40 03:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:40 Parameters OK 03:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:40 Set A/D data flow result=40 03:40:40 Set A/D channel type result=40 03:40:40 Set A/D encoding result=40 03:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:40 Set channel filter=0.000000e+000 result=40 03:40:40 Config A/D Result=40 03:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:40 Get A/D filter: -9.255963e+061 result=40 03:40:40 Get A/D value=-858993460 result=40 03:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:40 Aux= 03:40:40 Message to Camera, serial 38235 queued 03:41:17 Received message from Master: op=PointingHead serial=38248 03:41:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:41:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:41:17 Point started: ret=0 03:41:17 point_skyscan result=0 03:41:18 Check angles 03:41:18 SkyScan query 03:41:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 03:41:18 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 03:41:19 Check angles 03:41:19 SkyScan query 03:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 03:41:19 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 03:41:19 Check angles 03:41:19 SkyScan query 03:41:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.655<-16377 Statuses=0008 0009 03:41:20 Msec=1500 True Az=112.995 Ze=-65.655 Az status=0008 Ze status=0009 03:41:20 Check angles 03:41:20 SkyScan query 03:41:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 03:41:21 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 03:41:21 Check angles 03:41:21 SkyScan query 03:41:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.985<-19199 Statuses=0008 0009 03:41:21 Msec=3000 True Az=112.995 Ze=-107.985 Az status=0008 Ze status=0009 03:41:22 Check angles 03:41:22 SkyScan query 03:41:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.925<-20595 Statuses=0008 0009 03:41:22 Msec=3750 True Az=112.995 Ze=-128.925 Az status=0008 Ze status=0009 03:41:22 Check angles 03:41:22 SkyScan query 03:41:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.895<-21993 Statuses=0008 0009 03:41:23 Msec=4500 True Az=112.995 Ze=-149.895 Az status=0008 Ze status=0009 03:41:23 Check angles 03:41:23 SkyScan query 03:41:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 03:41:24 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 03:41:24 Check angles 03:41:24 SkyScan query 03:41:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:41:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:41:24 Message to Master queued w/err=0: serial=38248 error=0 03:41:29 Received message from Master: op=Filter serial=38249 03:41:29 Color wheel filter change from 0 to 0 03:41:29 FLIGetFilterPos err=0 currentPosition=0 03:41:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:29 Filter is already there-color wheel unchanged 03:41:30 Received message from Master: op=Shutter serial=38250 03:41:30 Shutter LASER open 03:41:30 Received message from Camera: op=State serial=38252 03:41:30 GetSingleValue result=40 Value=cccccccc 03:41:30 SkyScan query 03:41:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:41:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:30 Parameters OK 03:41:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:30 Set A/D data flow result=40 03:41:30 Set A/D channel type result=40 03:41:30 Set A/D encoding result=40 03:41:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:30 Set channel filter=0.000000e+000 result=40 03:41:30 Config A/D Result=40 03:41:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:30 Get A/D filter: -9.255963e+061 result=40 03:41:30 Get A/D value=-858993460 result=40 03:41:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:30 Parameters OK 03:41:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:30 Set A/D data flow result=40 03:41:30 Set A/D channel type result=40 03:41:30 Set A/D encoding result=40 03:41:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:30 Set channel filter=0.000000e+000 result=40 03:41:30 Config A/D Result=40 03:41:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:30 Get A/D filter: -9.255963e+061 result=40 03:41:30 Get A/D value=-858993460 result=40 03:41:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:30 Aux= 03:41:30 Message to Camera, serial 38252 queued 03:41:38 Received message from Master: op=Shutter serial=38261 03:41:38 Shutter LASER close 03:41:38 Received message from Master: op=PointingHead serial=38265 03:41:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:41:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:41:39 Point started: ret=0 03:41:39 point_skyscan result=0 03:41:40 Check angles 03:41:40 SkyScan query 03:41:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 03:41:40 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 03:41:40 Check angles 03:41:40 SkyScan query 03:41:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.37<-20158 Statuses=0008 0009 03:41:41 Msec=750 True Az=112.995 Ze=-122.37 Az status=0008 Ze status=0009 03:41:41 Check angles 03:41:41 SkyScan query 03:41:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.4<-18760 Statuses=0008 0009 03:41:42 Msec=1500 True Az=112.995 Ze=-101.4 Az status=0008 Ze status=0009 03:41:42 Check angles 03:41:42 SkyScan query 03:41:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.445<-17363 Statuses=0008 0009 03:41:42 Msec=2250 True Az=112.995 Ze=-80.445 Az status=0008 Ze status=0009 03:41:43 Check angles 03:41:43 SkyScan query 03:41:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.49<-15966 Statuses=0008 0009 03:41:43 Msec=3000 True Az=112.995 Ze=-59.49 Az status=0008 Ze status=0009 03:41:43 Check angles 03:41:43 SkyScan query 03:41:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.52<-14568 Statuses=0008 0009 03:41:44 Msec=3750 True Az=112.995 Ze=-38.52 Az status=0008 Ze status=0009 03:41:44 Check angles 03:41:44 SkyScan query 03:41:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.58<-13172 Statuses=0008 0009 03:41:45 Msec=4500 True Az=112.995 Ze=-17.58 Az status=0008 Ze status=0009 03:41:45 Check angles 03:41:45 SkyScan query 03:41:45 SkyScan query done: ret=0 az=112.995<-7533 ze=3.825<-11745 Statuses=0008 0009 03:41:45 Msec=5250 True Az=112.995 Ze=3.825 Az status=0008 Ze status=0009 03:41:46 Check angles 03:41:46 SkyScan query 03:41:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:41:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:41:46 Message to Master queued w/err=0: serial=38265 error=0 03:41:51 Received message from Master: op=Filter serial=38266 03:41:51 Color wheel filter change from 0 to 0 03:41:51 FLIGetFilterPos err=0 currentPosition=0 03:41:51 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:51 Filter is already there-color wheel unchanged 03:41:51 Received message from Master: op=Shutter serial=38267 03:41:51 Shutter LASER close 03:41:52 Received message from Camera: op=State serial=38269 03:41:52 GetSingleValue result=40 Value=cccccccc 03:41:52 SkyScan query 03:41:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:41:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:52 Parameters OK 03:41:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:52 Set A/D data flow result=40 03:41:52 Set A/D channel type result=40 03:41:52 Set A/D encoding result=40 03:41:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:52 Set channel filter=0.000000e+000 result=40 03:41:52 Config A/D Result=40 03:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:52 Get A/D filter: -9.255963e+061 result=40 03:41:52 Get A/D value=-858993460 result=40 03:41:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:52 Parameters OK 03:41:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:52 Set A/D data flow result=40 03:41:52 Set A/D channel type result=40 03:41:52 Set A/D encoding result=40 03:41:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:52 Set channel filter=0.000000e+000 result=40 03:41:52 Config A/D Result=40 03:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:52 Get A/D filter: -9.255963e+061 result=40 03:41:52 Get A/D value=-858993460 result=40 03:41:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:52 Aux= 03:41:52 Message to Camera, serial 38269 queued 03:42:28 Received message from Master: op=PointingHead serial=38281 03:42:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:42:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:42:28 Point started: ret=0 03:42:28 point_skyscan result=0 03:42:29 Check angles 03:42:29 SkyScan query 03:42:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:42:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:42:30 Message to Master queued w/err=0: serial=38281 error=0 03:42:35 Received message from Master: op=Filter serial=38282 03:42:35 Color wheel filter change from 0 to 0 03:42:35 FLIGetFilterPos err=0 currentPosition=0 03:42:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:35 Filter is already there-color wheel unchanged 03:42:35 Received message from Master: op=Shutter serial=38283 03:42:35 Shutter LASER close 03:42:35 Received message from Camera: op=State serial=38285 03:42:35 GetSingleValue result=40 Value=cccccccc 03:42:35 SkyScan query 03:42:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:42:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:35 Parameters OK 03:42:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:35 Set A/D data flow result=40 03:42:35 Set A/D channel type result=40 03:42:35 Set A/D encoding result=40 03:42:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:35 Set channel filter=0.000000e+000 result=40 03:42:35 Config A/D Result=40 03:42:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:35 Get A/D filter: -9.255963e+061 result=40 03:42:35 Get A/D value=-858993460 result=40 03:42:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:35 Parameters OK 03:42:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:35 Set A/D data flow result=40 03:42:35 Set A/D channel type result=40 03:42:35 Set A/D encoding result=40 03:42:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:35 Set channel filter=0.000000e+000 result=40 03:42:35 Config A/D Result=40 03:42:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:35 Get A/D filter: -9.255963e+061 result=40 03:42:35 Get A/D value=-858993460 result=40 03:42:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:42:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:42:35 Aux= 03:42:35 Message to Camera, serial 38285 queued 03:43:12 Received message from Master: op=PointingHead serial=38298 03:43:12 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:43:12 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:43:13 Point started: ret=0 03:43:13 point_skyscan result=0 03:43:13 Check angles 03:43:13 SkyScan query 03:43:14 SkyScan query done: ret=0 az=135.78<-9052 ze=-6.51<-12434 Statuses=0009 0008 03:43:14 Msec=0 True Az=135.78 Ze=-6.51 Az status=0009 Ze status=0008 03:43:14 Check angles 03:43:14 SkyScan query 03:43:15 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.495<-12433 Statuses=0009 0008 03:43:15 Msec=750 True Az=153.345 Ze=-6.495 Az status=0009 Ze status=0008 03:43:15 Check angles 03:43:15 SkyScan query 03:43:15 SkyScan query done: ret=0 az=170.88<-11392 ze=-6.495<-12433 Statuses=0009 0008 03:43:15 Msec=1500 True Az=170.88 Ze=-6.495 Az status=0009 Ze status=0008 03:43:16 Check angles 03:43:16 SkyScan query 03:43:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:43:16 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:43:16 Message to Master queued w/err=0: serial=38298 error=0 03:43:21 Received message from Master: op=Filter serial=38299 03:43:21 Color wheel filter change from 0 to 0 03:43:21 FLIGetFilterPos err=0 currentPosition=0 03:43:21 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:21 Filter is already there-color wheel unchanged 03:43:21 Received message from Master: op=Shutter serial=38300 03:43:21 Shutter LASER close 03:43:21 Received message from Camera: op=State serial=38302 03:43:21 GetSingleValue result=40 Value=cccccccc 03:43:21 SkyScan query 03:43:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:43:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:22 Parameters OK 03:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:22 Set A/D data flow result=40 03:43:22 Set A/D channel type result=40 03:43:22 Set A/D encoding result=40 03:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:22 Set channel filter=0.000000e+000 result=40 03:43:22 Config A/D Result=40 03:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:22 Get A/D filter: -9.255963e+061 result=40 03:43:22 Get A/D value=-858993460 result=40 03:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:22 Parameters OK 03:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:22 Set A/D data flow result=40 03:43:22 Set A/D channel type result=40 03:43:22 Set A/D encoding result=40 03:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:22 Set channel filter=0.000000e+000 result=40 03:43:22 Config A/D Result=40 03:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:22 Get A/D filter: -9.255963e+061 result=40 03:43:22 Get A/D value=-858993460 result=40 03:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:22 Aux= 03:43:22 Message to Camera, serial 38302 queued [UTC 2019-3-1 03:43:50] 03:43:59 Received message from Master: op=PointingHead serial=38315 03:43:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:43:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:43:59 Point started: ret=0 03:43:59 point_skyscan result=0 03:44:00 Check angles 03:44:00 SkyScan query 03:44:00 SkyScan query done: ret=0 az=152.55<-10170 ze=6.51<-11566 Statuses=0009 0008 03:44:00 Msec=0 True Az=152.55 Ze=6.51 Az status=0009 Ze status=0008 03:44:01 Check angles 03:44:01 SkyScan query 03:44:01 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 03:44:01 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 03:44:01 Check angles 03:44:01 SkyScan query 03:44:02 SkyScan query done: ret=0 az=117.6<-7840 ze=6.495<-11567 Statuses=0009 0008 03:44:02 Msec=1500 True Az=117.6 Ze=6.495 Az status=0009 Ze status=0008 03:44:02 Check angles 03:44:02 SkyScan query 03:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:44:03 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:44:03 Message to Master queued w/err=0: serial=38315 error=0 03:44:08 Received message from Master: op=Filter serial=38316 03:44:08 Color wheel filter change from 0 to 0 03:44:08 FLIGetFilterPos err=0 currentPosition=0 03:44:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:08 Filter is already there-color wheel unchanged 03:44:08 Received message from Master: op=Shutter serial=38317 03:44:08 Shutter LASER close 03:44:08 Received message from Camera: op=State serial=38319 03:44:08 GetSingleValue result=40 Value=cccccccc 03:44:08 SkyScan query 03:44:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:44:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:09 Parameters OK 03:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:09 Set A/D data flow result=40 03:44:09 Set A/D channel type result=40 03:44:09 Set A/D encoding result=40 03:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:09 Set channel filter=0.000000e+000 result=40 03:44:09 Config A/D Result=40 03:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:09 Get A/D filter: -9.255963e+061 result=40 03:44:09 Get A/D value=-858993460 result=40 03:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:09 Parameters OK 03:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:09 Set A/D data flow result=40 03:44:09 Set A/D channel type result=40 03:44:09 Set A/D encoding result=40 03:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:09 Set channel filter=0.000000e+000 result=40 03:44:09 Config A/D Result=40 03:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:09 Get A/D filter: -9.255963e+061 result=40 03:44:09 Get A/D value=-858993460 result=40 03:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:09 Aux= 03:44:09 Message to Camera, serial 38319 queued 03:44:45 Received message from Master: op=PointingHead serial=38332 03:44:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:44:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:44:46 Point started: ret=0 03:44:46 point_skyscan result=0 03:44:46 Check angles 03:44:46 SkyScan query 03:44:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 03:44:47 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 03:44:47 Check angles 03:44:47 SkyScan query 03:44:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 03:44:48 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 03:44:48 Check angles 03:44:48 SkyScan query 03:44:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 03:44:49 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 03:44:49 Check angles 03:44:49 SkyScan query 03:44:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.73<-17782 Statuses=0008 0009 03:44:49 Msec=2250 True Az=112.995 Ze=-86.73 Az status=0008 Ze status=0009 03:44:49 Check angles 03:44:49 SkyScan query 03:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.67<-19178 Statuses=0008 0009 03:44:50 Msec=3000 True Az=112.995 Ze=-107.67 Az status=0008 Ze status=0009 03:44:50 Check angles 03:44:50 SkyScan query 03:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.045<-20603 Statuses=0008 0009 03:44:51 Msec=3750 True Az=112.995 Ze=-129.045 Az status=0008 Ze status=0009 03:44:51 Check angles 03:44:51 SkyScan query 03:44:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.015<-22001 Statuses=0008 0009 03:44:52 Msec=4500 True Az=112.995 Ze=-150.015 Az status=0008 Ze status=0009 03:44:52 Check angles 03:44:52 SkyScan query 03:44:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.88<-23392 Statuses=0008 0009 03:44:52 Msec=5250 True Az=112.995 Ze=-170.88 Az status=0008 Ze status=0009 03:44:52 Check angles 03:44:52 SkyScan query 03:44:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:44:53 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:44:53 Message to Master queued w/err=0: serial=38332 error=0 03:44:58 Received message from Master: op=Filter serial=38333 03:44:58 Color wheel filter change from 0 to 0 03:44:58 FLIGetFilterPos err=0 currentPosition=0 03:44:58 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:58 Filter is already there-color wheel unchanged 03:44:58 Received message from Master: op=Shutter serial=38334 03:44:58 Shutter LASER open 03:44:58 Received message from Camera: op=State serial=38336 03:44:58 GetSingleValue result=40 Value=cccccccc 03:44:58 SkyScan query 03:44:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:44:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:59 Parameters OK 03:44:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:59 Set A/D data flow result=40 03:44:59 Set A/D channel type result=40 03:44:59 Set A/D encoding result=40 03:44:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:59 Set channel filter=0.000000e+000 result=40 03:44:59 Config A/D Result=40 03:44:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:59 Get A/D filter: -9.255963e+061 result=40 03:44:59 Get A/D value=-858993460 result=40 03:44:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:59 Parameters OK 03:44:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:59 Set A/D data flow result=40 03:44:59 Set A/D channel type result=40 03:44:59 Set A/D encoding result=40 03:44:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:59 Set channel filter=0.000000e+000 result=40 03:44:59 Config A/D Result=40 03:44:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:59 Get A/D filter: -9.255963e+061 result=40 03:44:59 Get A/D value=-858993460 result=40 03:44:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:59 Aux= 03:44:59 Message to Camera, serial 38336 queued 03:45:07 Received message from Master: op=Shutter serial=38346 03:45:07 Shutter LASER close 03:45:08 Received message from Master: op=PointingHead serial=38350 03:45:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:45:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:45:08 Point started: ret=0 03:45:08 point_skyscan result=0 03:45:09 Check angles 03:45:09 SkyScan query 03:45:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 03:45:10 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 03:45:10 Check angles 03:45:10 SkyScan query 03:45:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 03:45:10 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 03:45:10 Check angles 03:45:10 SkyScan query 03:45:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 03:45:11 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 03:45:11 Check angles 03:45:11 SkyScan query 03:45:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.785<-17319 Statuses=0008 0009 03:45:12 Msec=2250 True Az=112.995 Ze=-79.785 Az status=0008 Ze status=0009 03:45:12 Check angles 03:45:12 SkyScan query 03:45:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 03:45:13 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 03:45:13 Check angles 03:45:13 SkyScan query 03:45:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.425<-14495 Statuses=0008 0009 03:45:13 Msec=3750 True Az=112.995 Ze=-37.425 Az status=0008 Ze status=0009 03:45:13 Check angles 03:45:13 SkyScan query 03:45:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.47<-13098 Statuses=0008 0009 03:45:14 Msec=4500 True Az=112.995 Ze=-16.47 Az status=0008 Ze status=0009 03:45:14 Check angles 03:45:14 SkyScan query 03:45:15 SkyScan query done: ret=0 az=112.995<-7533 ze=4.425<-11705 Statuses=0008 0009 03:45:15 Msec=5250 True Az=112.995 Ze=4.425 Az status=0008 Ze status=0009 03:45:15 Check angles 03:45:15 SkyScan query 03:45:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:45:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:45:16 Message to Master queued w/err=0: serial=38350 error=0 03:45:21 Received message from Master: op=Filter serial=38351 03:45:21 Color wheel filter change from 0 to 0 03:45:21 FLIGetFilterPos err=0 currentPosition=0 03:45:21 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:21 Filter is already there-color wheel unchanged 03:45:21 Received message from Master: op=Shutter serial=38352 03:45:21 Shutter LASER close 03:45:21 Received message from Camera: op=State serial=38354 03:45:21 GetSingleValue result=40 Value=cccccccc 03:45:21 SkyScan query 03:45:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:45:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:21 Parameters OK 03:45:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:21 Set A/D data flow result=40 03:45:21 Set A/D channel type result=40 03:45:21 Set A/D encoding result=40 03:45:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:21 Set channel filter=0.000000e+000 result=40 03:45:21 Config A/D Result=40 03:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:21 Get A/D filter: -9.255963e+061 result=40 03:45:21 Get A/D value=-858993460 result=40 03:45:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:21 Parameters OK 03:45:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:21 Set A/D data flow result=40 03:45:21 Set A/D channel type result=40 03:45:21 Set A/D encoding result=40 03:45:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:21 Set channel filter=0.000000e+000 result=40 03:45:21 Config A/D Result=40 03:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:21 Get A/D filter: -9.255963e+061 result=40 03:45:21 Get A/D value=-858993460 result=40 03:45:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:21 Aux= 03:45:21 Message to Camera, serial 38354 queued 03:45:58 Received message from Master: op=PointingHead serial=38367 03:45:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:45:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:45:59 Point started: ret=0 03:45:59 point_skyscan result=0 03:45:59 Check angles 03:45:59 SkyScan query 03:46:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:46:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:46:00 Message to Master queued w/err=0: serial=38367 error=0 03:46:05 Received message from Master: op=Filter serial=38368 03:46:05 Color wheel filter change from 0 to 0 03:46:05 FLIGetFilterPos err=0 currentPosition=0 03:46:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:05 Filter is already there-color wheel unchanged 03:46:05 Received message from Master: op=Shutter serial=38369 03:46:05 Shutter LASER close 03:46:05 Received message from Camera: op=State serial=38371 03:46:05 GetSingleValue result=40 Value=cccccccc 03:46:05 SkyScan query 03:46:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:46:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:06 Parameters OK 03:46:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:06 Set A/D data flow result=40 03:46:06 Set A/D channel type result=40 03:46:06 Set A/D encoding result=40 03:46:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:06 Set channel filter=0.000000e+000 result=40 03:46:06 Config A/D Result=40 03:46:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:06 Get A/D filter: -9.255963e+061 result=40 03:46:06 Get A/D value=-858993460 result=40 03:46:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:06 Parameters OK 03:46:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:06 Set A/D data flow result=40 03:46:06 Set A/D channel type result=40 03:46:06 Set A/D encoding result=40 03:46:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:06 Set channel filter=0.000000e+000 result=40 03:46:06 Config A/D Result=40 03:46:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:06 Get A/D filter: -9.255963e+061 result=40 03:46:06 Get A/D value=-858993460 result=40 03:46:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:06 Aux= 03:46:06 Message to Camera, serial 38371 queued 03:46:43 Received message from Master: op=PointingHead serial=38384 03:46:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:46:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:46:43 Point started: ret=0 03:46:43 point_skyscan result=0 03:46:44 Check angles 03:46:44 SkyScan query 03:46:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:46:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:46:44 Message to Master queued w/err=0: serial=38384 error=0 03:46:49 Received message from Master: op=Filter serial=38385 03:46:49 Color wheel filter change from 0 to 0 03:46:49 FLIGetFilterPos err=0 currentPosition=0 03:46:49 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:49 Filter is already there-color wheel unchanged 03:46:49 Received message from Master: op=Shutter serial=38386 03:46:49 Shutter LASER close 03:46:50 Received message from Camera: op=State serial=38388 03:46:50 GetSingleValue result=40 Value=cccccccc 03:46:50 SkyScan query 03:46:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:46:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:50 Parameters OK 03:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:50 Set A/D data flow result=40 03:46:50 Set A/D channel type result=40 03:46:50 Set A/D encoding result=40 03:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:50 Set channel filter=0.000000e+000 result=40 03:46:50 Config A/D Result=40 03:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:50 Get A/D filter: -9.255963e+061 result=40 03:46:50 Get A/D value=-858993460 result=40 03:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:50 Parameters OK 03:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:50 Set A/D data flow result=40 03:46:50 Set A/D channel type result=40 03:46:50 Set A/D encoding result=40 03:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:50 Set channel filter=0.000000e+000 result=40 03:46:50 Config A/D Result=40 03:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:50 Get A/D filter: -9.255963e+061 result=40 03:46:50 Get A/D value=-858993460 result=40 03:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:50 Aux= 03:46:50 Message to Camera, serial 38388 queued 03:47:27 Received message from Master: op=PointingHead serial=38401 03:47:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:47:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:47:27 Point started: ret=0 03:47:27 point_skyscan result=0 03:47:28 Check angles 03:47:28 SkyScan query 03:47:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:47:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:47:29 Message to Master queued w/err=0: serial=38401 error=0 03:47:34 Received message from Master: op=Filter serial=38402 03:47:34 Color wheel filter change from 0 to 0 03:47:34 FLIGetFilterPos err=0 currentPosition=0 03:47:34 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:34 Filter is already there-color wheel unchanged 03:47:34 Received message from Master: op=Shutter serial=38403 03:47:34 Shutter LASER close 03:47:34 Received message from Camera: op=State serial=38405 03:47:34 GetSingleValue result=40 Value=cccccccc 03:47:34 SkyScan query 03:47:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:47:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:34 Parameters OK 03:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:34 Set A/D data flow result=40 03:47:34 Set A/D channel type result=40 03:47:34 Set A/D encoding result=40 03:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:34 Set channel filter=0.000000e+000 result=40 03:47:34 Config A/D Result=40 03:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:34 Get A/D filter: -9.255963e+061 result=40 03:47:34 Get A/D value=-858993460 result=40 03:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:34 Parameters OK 03:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:34 Set A/D data flow result=40 03:47:34 Set A/D channel type result=40 03:47:34 Set A/D encoding result=40 03:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:34 Set channel filter=0.000000e+000 result=40 03:47:34 Config A/D Result=40 03:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:34 Get A/D filter: -9.255963e+061 result=40 03:47:34 Get A/D value=-858993460 result=40 03:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:34 Aux= 03:47:34 Message to Camera, serial 38405 queued 03:48:11 Received message from Master: op=PointingHead serial=38418 03:48:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:48:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:48:12 Point started: ret=0 03:48:12 point_skyscan result=0 03:48:12 Check angles 03:48:12 SkyScan query 03:48:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.685<-13579 Statuses=0008 0009 03:48:13 Msec=0 True Az=112.995 Ze=-23.685 Az status=0008 Ze status=0009 03:48:13 Check angles 03:48:13 SkyScan query 03:48:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 03:48:14 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 03:48:14 Check angles 03:48:14 SkyScan query 03:48:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 03:48:14 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 03:48:15 Check angles 03:48:15 SkyScan query 03:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 03:48:15 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 03:48:15 Check angles 03:48:15 SkyScan query 03:48:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 03:48:16 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 03:48:16 Check angles 03:48:16 SkyScan query 03:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.865<-20591 Statuses=0008 0009 03:48:17 Msec=3750 True Az=112.995 Ze=-128.865 Az status=0008 Ze status=0009 03:48:17 Check angles 03:48:17 SkyScan query 03:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 03:48:17 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 03:48:18 Check angles 03:48:18 SkyScan query 03:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 03:48:18 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 03:48:18 Check angles 03:48:18 SkyScan query 03:48:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:48:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:48:19 Message to Master queued w/err=0: serial=38418 error=0 03:48:24 Received message from Master: op=Filter serial=38419 03:48:24 Color wheel filter change from 0 to 0 03:48:24 FLIGetFilterPos err=0 currentPosition=0 03:48:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:24 Filter is already there-color wheel unchanged 03:48:24 Received message from Master: op=Shutter serial=38420 03:48:24 Shutter LASER open 03:48:24 Received message from Camera: op=State serial=38422 03:48:24 GetSingleValue result=40 Value=cccccccc 03:48:24 SkyScan query 03:48:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:48:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:25 Parameters OK 03:48:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:25 Set A/D data flow result=40 03:48:25 Set A/D channel type result=40 03:48:25 Set A/D encoding result=40 03:48:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:25 Set channel filter=0.000000e+000 result=40 03:48:25 Config A/D Result=40 03:48:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:25 Get A/D filter: -9.255963e+061 result=40 03:48:25 Get A/D value=-858993460 result=40 03:48:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:25 Parameters OK 03:48:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:25 Set A/D data flow result=40 03:48:25 Set A/D channel type result=40 03:48:25 Set A/D encoding result=40 03:48:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:25 Set channel filter=0.000000e+000 result=40 03:48:25 Config A/D Result=40 03:48:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:25 Get A/D filter: -9.255963e+061 result=40 03:48:25 Get A/D value=-858993460 result=40 03:48:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:25 Aux= 03:48:25 Message to Camera, serial 38422 queued 03:48:33 Received message from Master: op=Shutter serial=38432 03:48:33 Shutter LASER close 03:48:34 Received message from Master: op=PointingHead serial=38436 03:48:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:48:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:48:34 Point started: ret=0 03:48:34 point_skyscan result=0 03:48:35 Check angles 03:48:35 SkyScan query 03:48:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 03:48:36 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 03:48:36 Check angles 03:48:36 SkyScan query 03:48:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 03:48:36 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 03:48:36 Check angles 03:48:36 SkyScan query 03:48:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 03:48:37 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 03:48:37 Check angles 03:48:37 SkyScan query 03:48:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 03:48:38 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 03:48:38 Check angles 03:48:38 SkyScan query 03:48:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 03:48:39 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 03:48:39 Check angles 03:48:39 SkyScan query 03:48:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.235<-14549 Statuses=0008 0009 03:48:39 Msec=3750 True Az=112.995 Ze=-38.235 Az status=0008 Ze status=0009 03:48:39 Check angles 03:48:39 SkyScan query 03:48:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 03:48:40 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 03:48:40 Check angles 03:48:40 SkyScan query 03:48:41 SkyScan query done: ret=0 az=112.995<-7533 ze=3.705<-11753 Statuses=0008 0009 03:48:41 Msec=5250 True Az=112.995 Ze=3.705 Az status=0008 Ze status=0009 03:48:41 Check angles 03:48:41 SkyScan query 03:48:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:48:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:48:42 Message to Master queued w/err=0: serial=38436 error=0 03:48:47 Received message from Master: op=Filter serial=38437 03:48:47 Color wheel filter change from 0 to 0 03:48:47 FLIGetFilterPos err=0 currentPosition=0 03:48:47 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:47 Filter is already there-color wheel unchanged 03:48:47 Received message from Master: op=Shutter serial=38438 03:48:47 Shutter LASER close 03:48:47 Received message from Camera: op=State serial=38440 03:48:47 GetSingleValue result=40 Value=cccccccc 03:48:47 SkyScan query 03:48:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:48:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:47 Parameters OK 03:48:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:47 Set A/D data flow result=40 03:48:47 Set A/D channel type result=40 03:48:47 Set A/D encoding result=40 03:48:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:47 Set channel filter=0.000000e+000 result=40 03:48:47 Config A/D Result=40 03:48:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:47 Get A/D filter: -9.255963e+061 result=40 03:48:47 Get A/D value=-858993460 result=40 03:48:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:47 Parameters OK 03:48:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:47 Set A/D data flow result=40 03:48:47 Set A/D channel type result=40 03:48:47 Set A/D encoding result=40 03:48:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:47 Set channel filter=0.000000e+000 result=40 03:48:47 Config A/D Result=40 03:48:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:47 Get A/D filter: -9.255963e+061 result=40 03:48:47 Get A/D value=-858993460 result=40 03:48:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:47 Aux= 03:48:47 Message to Camera, serial 38440 queued 03:49:24 Received message from Master: op=PointingHead serial=38453 03:49:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:49:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:49:25 Point started: ret=0 03:49:25 point_skyscan result=0 03:49:25 Check angles 03:49:25 SkyScan query 03:49:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:49:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:49:26 Message to Master queued w/err=0: serial=38453 error=0 03:49:31 Received message from Master: op=Filter serial=38454 03:49:31 Color wheel filter change from 0 to 0 03:49:31 FLIGetFilterPos err=0 currentPosition=0 03:49:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:49:31 Filter is already there-color wheel unchanged 03:49:31 Received message from Master: op=Shutter serial=38455 03:49:31 Shutter LASER close 03:49:31 Received message from Camera: op=State serial=38457 03:49:31 GetSingleValue result=40 Value=cccccccc 03:49:31 SkyScan query 03:49:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:49:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:32 Parameters OK 03:49:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:32 Set A/D data flow result=40 03:49:32 Set A/D channel type result=40 03:49:32 Set A/D encoding result=40 03:49:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:32 Set channel filter=0.000000e+000 result=40 03:49:32 Config A/D Result=40 03:49:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:32 Get A/D filter: -9.255963e+061 result=40 03:49:32 Get A/D value=-858993460 result=40 03:49:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:32 Parameters OK 03:49:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:32 Set A/D data flow result=40 03:49:32 Set A/D channel type result=40 03:49:32 Set A/D encoding result=40 03:49:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:32 Set channel filter=0.000000e+000 result=40 03:49:32 Config A/D Result=40 03:49:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:32 Get A/D filter: -9.255963e+061 result=40 03:49:32 Get A/D value=-858993460 result=40 03:49:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:49:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:49:32 Aux= 03:49:32 Message to Camera, serial 38457 queued 03:50:09 Received message from Master: op=PointingHead serial=38470 03:50:09 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:50:09 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:50:09 Point started: ret=0 03:50:09 point_skyscan result=0 03:50:10 Check angles 03:50:10 SkyScan query 03:50:10 SkyScan query done: ret=0 az=136.14<-9076 ze=-6.495<-12433 Statuses=0009 0008 03:50:10 Msec=0 True Az=136.14 Ze=-6.495 Az status=0009 Ze status=0008 03:50:10 Check angles 03:50:10 SkyScan query 03:50:11 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.48<-12432 Statuses=0009 0008 03:50:11 Msec=750 True Az=153.6 Ze=-6.48 Az status=0009 Ze status=0008 03:50:11 Check angles 03:50:11 SkyScan query 03:50:12 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.48<-12432 Statuses=0009 0008 03:50:12 Msec=1500 True Az=171.15 Ze=-6.48 Az status=0009 Ze status=0008 03:50:12 Check angles 03:50:12 SkyScan query 03:50:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:50:13 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 03:50:13 Message to Master queued w/err=0: serial=38470 error=0 03:50:18 Received message from Master: op=Filter serial=38471 03:50:18 Color wheel filter change from 0 to 0 03:50:18 FLIGetFilterPos err=0 currentPosition=0 03:50:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:18 Filter is already there-color wheel unchanged 03:50:18 Received message from Master: op=Shutter serial=38472 03:50:18 Shutter LASER close 03:50:18 Received message from Camera: op=State serial=38474 03:50:18 GetSingleValue result=40 Value=cccccccc 03:50:18 SkyScan query 03:50:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:50:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:18 Parameters OK 03:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:18 Set A/D data flow result=40 03:50:18 Set A/D channel type result=40 03:50:18 Set A/D encoding result=40 03:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:18 Set channel filter=0.000000e+000 result=40 03:50:18 Config A/D Result=40 03:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:18 Get A/D filter: -9.255963e+061 result=40 03:50:18 Get A/D value=-858993460 result=40 03:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:18 Parameters OK 03:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:18 Set A/D data flow result=40 03:50:18 Set A/D channel type result=40 03:50:18 Set A/D encoding result=40 03:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:18 Set channel filter=0.000000e+000 result=40 03:50:18 Config A/D Result=40 03:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:18 Get A/D filter: -9.255963e+061 result=40 03:50:18 Get A/D value=-858993460 result=40 03:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:18 Aux= 03:50:18 Message to Camera, serial 38474 queued 03:50:54 Received message from Master: op=PointingHead serial=38486 03:50:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:50:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:50:55 Point started: ret=0 03:50:55 point_skyscan result=0 03:50:55 Check angles 03:50:55 SkyScan query 03:50:56 SkyScan query done: ret=0 az=152.58<-10172 ze=6.51<-11566 Statuses=0009 0008 03:50:56 Msec=0 True Az=152.58 Ze=6.51 Az status=0009 Ze status=0008 03:50:56 Check angles 03:50:56 SkyScan query 03:50:57 SkyScan query done: ret=0 az=134.775<-8985 ze=6.495<-11567 Statuses=0009 0008 03:50:57 Msec=750 True Az=134.775 Ze=6.495 Az status=0009 Ze status=0008 03:50:57 Check angles 03:50:57 SkyScan query 03:50:57 SkyScan query done: ret=0 az=117.3<-7820 ze=6.495<-11567 Statuses=0009 0008 03:50:57 Msec=1500 True Az=117.3 Ze=6.495 Az status=0009 Ze status=0008 03:50:58 Check angles 03:50:58 SkyScan query 03:50:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:50:58 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:50:58 Message to Master queued w/err=0: serial=38486 error=0 03:51:03 Received message from Master: op=Filter serial=38487 03:51:03 Color wheel filter change from 0 to 0 03:51:03 FLIGetFilterPos err=0 currentPosition=0 03:51:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:03 Filter is already there-color wheel unchanged 03:51:03 Received message from Master: op=Shutter serial=38488 03:51:03 Shutter LASER close 03:51:03 Received message from Camera: op=State serial=38490 03:51:03 GetSingleValue result=40 Value=cccccccc 03:51:03 SkyScan query 03:51:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:51:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:04 Parameters OK 03:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:04 Set A/D data flow result=40 03:51:04 Set A/D channel type result=40 03:51:04 Set A/D encoding result=40 03:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:04 Set channel filter=0.000000e+000 result=40 03:51:04 Config A/D Result=40 03:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:04 Get A/D filter: -9.255963e+061 result=40 03:51:04 Get A/D value=-858993460 result=40 03:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:04 Parameters OK 03:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:04 Set A/D data flow result=40 03:51:04 Set A/D channel type result=40 03:51:04 Set A/D encoding result=40 03:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:04 Set channel filter=0.000000e+000 result=40 03:51:04 Config A/D Result=40 03:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:04 Get A/D filter: -9.255963e+061 result=40 03:51:04 Get A/D value=-858993460 result=40 03:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:04 Aux= 03:51:04 Message to Camera, serial 38490 queued 03:51:41 Received message from Master: op=PointingHead serial=38503 03:51:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:51:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:51:41 Point started: ret=0 03:51:41 point_skyscan result=0 03:51:42 Check angles 03:51:42 SkyScan query 03:51:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 03:51:42 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 03:51:43 Check angles 03:51:43 SkyScan query 03:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.195<-15013 Statuses=0008 0009 03:51:43 Msec=750 True Az=112.995 Ze=-45.195 Az status=0008 Ze status=0009 03:51:43 Check angles 03:51:43 SkyScan query 03:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.135<-16409 Statuses=0008 0009 03:51:44 Msec=1500 True Az=112.995 Ze=-66.135 Az status=0008 Ze status=0009 03:51:44 Check angles 03:51:44 SkyScan query 03:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.105<-17807 Statuses=0008 0009 03:51:45 Msec=2250 True Az=112.995 Ze=-87.105 Az status=0008 Ze status=0009 03:51:45 Check angles 03:51:45 SkyScan query 03:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.48<-19232 Statuses=0008 0009 03:51:45 Msec=3000 True Az=112.995 Ze=-108.48 Az status=0008 Ze status=0009 03:51:46 Check angles 03:51:46 SkyScan query 03:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.435<-20629 Statuses=0008 0009 03:51:46 Msec=3750 True Az=112.995 Ze=-129.435 Az status=0008 Ze status=0009 03:51:46 Check angles 03:51:46 SkyScan query 03:51:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.39<-22026 Statuses=0008 0009 03:51:47 Msec=4500 True Az=112.995 Ze=-150.39 Az status=0008 Ze status=0009 03:51:47 Check angles 03:51:47 SkyScan query 03:51:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.48<-23432 Statuses=0008 0009 03:51:48 Msec=5250 True Az=112.995 Ze=-171.48 Az status=0008 Ze status=0009 03:51:48 Check angles 03:51:48 SkyScan query 03:51:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:51:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:51:49 Message to Master queued w/err=0: serial=38503 error=0 03:51:54 Received message from Master: op=Filter serial=38504 03:51:54 Color wheel filter change from 0 to 0 03:51:54 FLIGetFilterPos err=0 currentPosition=0 03:51:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:54 Filter is already there-color wheel unchanged 03:51:54 Received message from Master: op=Shutter serial=38505 03:51:54 Shutter LASER open 03:51:54 Received message from Camera: op=State serial=38507 03:51:54 GetSingleValue result=40 Value=cccccccc 03:51:54 SkyScan query 03:51:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:51:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:54 Parameters OK 03:51:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:54 Set A/D data flow result=40 03:51:54 Set A/D channel type result=40 03:51:54 Set A/D encoding result=40 03:51:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:54 Set channel filter=0.000000e+000 result=40 03:51:54 Config A/D Result=40 03:51:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:54 Get A/D filter: -9.255963e+061 result=40 03:51:54 Get A/D value=-858993460 result=40 03:51:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:54 Parameters OK 03:51:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:54 Set A/D data flow result=40 03:51:54 Set A/D channel type result=40 03:51:54 Set A/D encoding result=40 03:51:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:54 Set channel filter=0.000000e+000 result=40 03:51:54 Config A/D Result=40 03:51:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:54 Get A/D filter: -9.255963e+061 result=40 03:51:54 Get A/D value=-858993460 result=40 03:51:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:54 Aux= 03:51:54 Message to Camera, serial 38507 queued 03:52:03 Received message from Master: op=Shutter serial=38517 03:52:03 Shutter LASER close 03:52:03 Received message from Master: op=PointingHead serial=38521 03:52:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:52:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:52:04 Point started: ret=0 03:52:04 point_skyscan result=0 03:52:04 Check angles 03:52:04 SkyScan query 03:52:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 03:52:05 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 03:52:05 Check angles 03:52:05 SkyScan query 03:52:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 03:52:06 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 03:52:06 Check angles 03:52:06 SkyScan query 03:52:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.49<-18766 Statuses=0008 0009 03:52:06 Msec=1500 True Az=112.995 Ze=-101.49 Az status=0008 Ze status=0009 03:52:07 Check angles 03:52:07 SkyScan query 03:52:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 03:52:07 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 03:52:07 Check angles 03:52:07 SkyScan query 03:52:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.16<-15944 Statuses=0008 0009 03:52:08 Msec=3000 True Az=112.995 Ze=-59.16 Az status=0008 Ze status=0009 03:52:08 Check angles 03:52:08 SkyScan query 03:52:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 03:52:09 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 03:52:09 Check angles 03:52:09 SkyScan query 03:52:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 03:52:10 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 03:52:10 Check angles 03:52:10 SkyScan query 03:52:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 03:52:10 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 03:52:10 Check angles 03:52:10 SkyScan query 03:52:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:52:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:52:11 Message to Master queued w/err=0: serial=38521 error=0 03:52:16 Received message from Master: op=Filter serial=38522 03:52:16 Color wheel filter change from 0 to 0 03:52:16 FLIGetFilterPos err=0 currentPosition=0 03:52:16 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:16 Filter is already there-color wheel unchanged 03:52:16 Received message from Master: op=Shutter serial=38523 03:52:16 Shutter LASER close 03:52:16 Received message from Camera: op=State serial=38525 03:52:16 GetSingleValue result=40 Value=cccccccc 03:52:16 SkyScan query 03:52:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:52:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:17 Parameters OK 03:52:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:17 Set A/D data flow result=40 03:52:17 Set A/D channel type result=40 03:52:17 Set A/D encoding result=40 03:52:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:17 Set channel filter=0.000000e+000 result=40 03:52:17 Config A/D Result=40 03:52:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:17 Get A/D filter: -9.255963e+061 result=40 03:52:17 Get A/D value=-858993460 result=40 03:52:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:17 Parameters OK 03:52:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:17 Set A/D data flow result=40 03:52:17 Set A/D channel type result=40 03:52:17 Set A/D encoding result=40 03:52:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:17 Set channel filter=0.000000e+000 result=40 03:52:17 Config A/D Result=40 03:52:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:17 Get A/D filter: -9.255963e+061 result=40 03:52:17 Get A/D value=-858993460 result=40 03:52:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:17 Aux= 03:52:17 Message to Camera, serial 38525 queued 03:52:54 Received message from Master: op=PointingHead serial=38538 03:52:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:52:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:52:54 Point started: ret=0 03:52:54 point_skyscan result=0 03:52:55 Check angles 03:52:55 SkyScan query 03:52:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:52:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:52:55 Message to Master queued w/err=0: serial=38538 error=0 03:53:00 Received message from Master: op=Filter serial=38539 03:53:00 Color wheel filter change from 0 to 0 03:53:00 FLIGetFilterPos err=0 currentPosition=0 03:53:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:00 Filter is already there-color wheel unchanged 03:53:01 Received message from Master: op=Shutter serial=38540 03:53:01 Shutter LASER close 03:53:01 Received message from Camera: op=State serial=38542 03:53:01 GetSingleValue result=40 Value=cccccccc 03:53:01 SkyScan query 03:53:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:53:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:01 Parameters OK 03:53:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:01 Set A/D data flow result=40 03:53:01 Set A/D channel type result=40 03:53:01 Set A/D encoding result=40 03:53:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:01 Set channel filter=0.000000e+000 result=40 03:53:01 Config A/D Result=40 03:53:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:01 Get A/D filter: -9.255963e+061 result=40 03:53:01 Get A/D value=-858993460 result=40 03:53:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:01 Parameters OK 03:53:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:01 Set A/D data flow result=40 03:53:01 Set A/D channel type result=40 03:53:01 Set A/D encoding result=40 03:53:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:01 Set channel filter=0.000000e+000 result=40 03:53:01 Config A/D Result=40 03:53:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:01 Get A/D filter: -9.255963e+061 result=40 03:53:01 Get A/D value=-858993460 result=40 03:53:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:01 Aux= 03:53:01 Message to Camera, serial 38542 queued 03:53:38 Received message from Master: op=PointingHead serial=38555 03:53:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:53:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:53:38 Point started: ret=0 03:53:38 point_skyscan result=0 03:53:39 Check angles 03:53:39 SkyScan query 03:53:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:53:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:53:40 Message to Master queued w/err=0: serial=38555 error=0 03:53:45 Received message from Master: op=Filter serial=38556 03:53:45 Color wheel filter change from 0 to 0 03:53:45 FLIGetFilterPos err=0 currentPosition=0 03:53:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:45 Filter is already there-color wheel unchanged 03:53:45 Received message from Master: op=Shutter serial=38557 03:53:45 Shutter LASER close 03:53:45 Received message from Camera: op=State serial=38559 03:53:45 GetSingleValue result=40 Value=cccccccc 03:53:45 SkyScan query 03:53:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:53:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:46 Parameters OK 03:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:46 Set A/D data flow result=40 03:53:46 Set A/D channel type result=40 03:53:46 Set A/D encoding result=40 03:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:46 Set channel filter=0.000000e+000 result=40 03:53:46 Config A/D Result=40 03:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:46 Get A/D filter: -9.255963e+061 result=40 03:53:46 Get A/D value=-858993460 result=40 03:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:46 Parameters OK 03:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:46 Set A/D data flow result=40 03:53:46 Set A/D channel type result=40 03:53:46 Set A/D encoding result=40 03:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:46 Set channel filter=0.000000e+000 result=40 03:53:46 Config A/D Result=40 03:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:46 Get A/D filter: -9.255963e+061 result=40 03:53:46 Get A/D value=-858993460 result=40 03:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:46 Aux= 03:53:46 Message to Camera, serial 38559 queued [UTC 2019-3-1 03:54:22] 03:54:22 Received message from Master: op=PointingHead serial=38572 03:54:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:54:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:54:23 Point started: ret=0 03:54:23 point_skyscan result=0 03:54:24 Check angles 03:54:24 SkyScan query 03:54:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:54:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:54:24 Message to Master queued w/err=0: serial=38572 error=0 03:54:29 Received message from Master: op=Filter serial=38573 03:54:29 Color wheel filter change from 0 to 0 03:54:29 FLIGetFilterPos err=0 currentPosition=0 03:54:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:29 Filter is already there-color wheel unchanged 03:54:29 Received message from Master: op=Shutter serial=38574 03:54:29 Shutter LASER close 03:54:29 Received message from Camera: op=State serial=38576 03:54:29 GetSingleValue result=40 Value=cccccccc 03:54:29 SkyScan query 03:54:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:54:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:30 Parameters OK 03:54:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:30 Set A/D data flow result=40 03:54:30 Set A/D channel type result=40 03:54:30 Set A/D encoding result=40 03:54:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:30 Set channel filter=0.000000e+000 result=40 03:54:30 Config A/D Result=40 03:54:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:30 Get A/D filter: -9.255963e+061 result=40 03:54:30 Get A/D value=-858993460 result=40 03:54:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:30 Parameters OK 03:54:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:30 Set A/D data flow result=40 03:54:30 Set A/D channel type result=40 03:54:30 Set A/D encoding result=40 03:54:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:30 Set channel filter=0.000000e+000 result=40 03:54:30 Config A/D Result=40 03:54:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:30 Get A/D filter: -9.255963e+061 result=40 03:54:30 Get A/D value=-858993460 result=40 03:54:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:30 Aux= 03:54:30 Message to Camera, serial 38576 queued 03:55:07 Received message from Master: op=PointingHead serial=38589 03:55:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:55:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:55:07 Point started: ret=0 03:55:07 point_skyscan result=0 03:55:08 Check angles 03:55:08 SkyScan query 03:55:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.76<-13584 Statuses=0008 0009 03:55:08 Msec=0 True Az=112.995 Ze=-23.76 Az status=0008 Ze status=0009 03:55:09 Check angles 03:55:09 SkyScan query 03:55:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.165<-15011 Statuses=0008 0009 03:55:09 Msec=750 True Az=112.995 Ze=-45.165 Az status=0008 Ze status=0009 03:55:09 Check angles 03:55:09 SkyScan query 03:55:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.105<-16407 Statuses=0008 0009 03:55:10 Msec=1500 True Az=112.995 Ze=-66.105 Az status=0008 Ze status=0009 03:55:10 Check angles 03:55:10 SkyScan query 03:55:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.495<-17833 Statuses=0008 0009 03:55:11 Msec=2250 True Az=112.995 Ze=-87.495 Az status=0008 Ze status=0009 03:55:11 Check angles 03:55:11 SkyScan query 03:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.87<-19258 Statuses=0008 0009 03:55:12 Msec=3000 True Az=112.995 Ze=-108.87 Az status=0008 Ze status=0009 03:55:12 Check angles 03:55:12 SkyScan query 03:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-130.275<-20685 Statuses=0008 0009 03:55:12 Msec=3750 True Az=112.995 Ze=-130.275 Az status=0008 Ze status=0009 03:55:12 Check angles 03:55:12 SkyScan query 03:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.2<-22080 Statuses=0008 0009 03:55:13 Msec=4500 True Az=112.995 Ze=-151.2 Az status=0008 Ze status=0009 03:55:13 Check angles 03:55:13 SkyScan query 03:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.735<-23449 Statuses=0008 0009 03:55:14 Msec=5250 True Az=112.995 Ze=-171.735 Az status=0008 Ze status=0009 03:55:14 Check angles 03:55:14 SkyScan query 03:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:55:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:55:15 Message to Master queued w/err=0: serial=38589 error=0 03:55:20 Received message from Master: op=Filter serial=38590 03:55:20 Color wheel filter change from 0 to 0 03:55:20 FLIGetFilterPos err=0 currentPosition=0 03:55:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:20 Filter is already there-color wheel unchanged 03:55:20 Received message from Master: op=Shutter serial=38591 03:55:20 Shutter LASER open 03:55:20 Received message from Camera: op=State serial=38593 03:55:20 GetSingleValue result=40 Value=cccccccc 03:55:20 SkyScan query 03:55:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:55:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:20 Parameters OK 03:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:20 Set A/D data flow result=40 03:55:20 Set A/D channel type result=40 03:55:20 Set A/D encoding result=40 03:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:20 Set channel filter=0.000000e+000 result=40 03:55:20 Config A/D Result=40 03:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:20 Get A/D filter: -9.255963e+061 result=40 03:55:20 Get A/D value=-858993460 result=40 03:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:20 Parameters OK 03:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:20 Set A/D data flow result=40 03:55:20 Set A/D channel type result=40 03:55:20 Set A/D encoding result=40 03:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:20 Set channel filter=0.000000e+000 result=40 03:55:20 Config A/D Result=40 03:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:20 Get A/D filter: -9.255963e+061 result=40 03:55:20 Get A/D value=-858993460 result=40 03:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:20 Aux= 03:55:20 Message to Camera, serial 38593 queued 03:55:28 Received message from Master: op=Shutter serial=38602 03:55:28 Shutter LASER close 03:55:29 Received message from Master: op=PointingHead serial=38606 03:55:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:55:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:55:29 Point started: ret=0 03:55:29 point_skyscan result=0 03:55:30 Check angles 03:55:30 SkyScan query 03:55:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 03:55:30 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 03:55:30 Check angles 03:55:30 SkyScan query 03:55:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.475<-20165 Statuses=0008 0009 03:55:31 Msec=750 True Az=112.995 Ze=-122.475 Az status=0008 Ze status=0009 03:55:31 Check angles 03:55:31 SkyScan query 03:55:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 03:55:32 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 03:55:32 Check angles 03:55:32 SkyScan query 03:55:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 03:55:32 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 03:55:33 Check angles 03:55:33 SkyScan query 03:55:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 03:55:33 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 03:55:33 Check angles 03:55:33 SkyScan query 03:55:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 03:55:34 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 03:55:34 Check angles 03:55:34 SkyScan query 03:55:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.815<-13121 Statuses=0008 0009 03:55:35 Msec=4500 True Az=112.995 Ze=-16.815 Az status=0008 Ze status=0009 03:55:35 Check angles 03:55:35 SkyScan query 03:55:35 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 03:55:35 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 03:55:36 Check angles 03:55:36 SkyScan query 03:55:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:55:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:55:36 Message to Master queued w/err=0: serial=38606 error=0 03:55:41 Received message from Master: op=Filter serial=38607 03:55:41 Color wheel filter change from 0 to 0 03:55:41 FLIGetFilterPos err=0 currentPosition=0 03:55:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:41 Filter is already there-color wheel unchanged 03:55:41 Received message from Master: op=Shutter serial=38608 03:55:41 Shutter LASER close 03:55:42 Received message from Camera: op=State serial=38610 03:55:42 GetSingleValue result=40 Value=cccccccc 03:55:42 SkyScan query 03:55:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:55:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:42 Parameters OK 03:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:42 Set A/D data flow result=40 03:55:42 Set A/D channel type result=40 03:55:42 Set A/D encoding result=40 03:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:42 Set channel filter=0.000000e+000 result=40 03:55:42 Config A/D Result=40 03:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:42 Get A/D filter: -9.255963e+061 result=40 03:55:42 Get A/D value=-858993460 result=40 03:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:42 Parameters OK 03:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:42 Set A/D data flow result=40 03:55:42 Set A/D channel type result=40 03:55:42 Set A/D encoding result=40 03:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:42 Set channel filter=0.000000e+000 result=40 03:55:42 Config A/D Result=40 03:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:42 Get A/D filter: -9.255963e+061 result=40 03:55:42 Get A/D value=-858993460 result=40 03:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:42 Aux= 03:55:42 Message to Camera, serial 38610 queued 03:56:19 Received message from Master: op=PointingHead serial=38623 03:56:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:56:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:56:19 Point started: ret=0 03:56:19 point_skyscan result=0 03:56:20 Check angles 03:56:20 SkyScan query 03:56:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:56:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:56:21 Message to Master queued w/err=0: serial=38623 error=0 03:56:26 Received message from Master: op=Filter serial=38624 03:56:26 Color wheel filter change from 0 to 0 03:56:26 FLIGetFilterPos err=0 currentPosition=0 03:56:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:26 Filter is already there-color wheel unchanged 03:56:26 Received message from Master: op=Shutter serial=38625 03:56:26 Shutter LASER close 03:56:26 Received message from Camera: op=State serial=38627 03:56:26 GetSingleValue result=40 Value=cccccccc 03:56:26 SkyScan query 03:56:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:56:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:26 Parameters OK 03:56:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:26 Set A/D data flow result=40 03:56:26 Set A/D channel type result=40 03:56:26 Set A/D encoding result=40 03:56:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:26 Set channel filter=0.000000e+000 result=40 03:56:26 Config A/D Result=40 03:56:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:26 Get A/D filter: -9.255963e+061 result=40 03:56:26 Get A/D value=-858993460 result=40 03:56:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:26 Parameters OK 03:56:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:26 Set A/D data flow result=40 03:56:26 Set A/D channel type result=40 03:56:26 Set A/D encoding result=40 03:56:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:26 Set channel filter=0.000000e+000 result=40 03:56:26 Config A/D Result=40 03:56:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:26 Get A/D filter: -9.255963e+061 result=40 03:56:26 Get A/D value=-858993460 result=40 03:56:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:26 Aux= 03:56:26 Message to Camera, serial 38627 queued 03:57:03 Received message from Master: op=PointingHead serial=38640 03:57:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:57:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:57:04 Point started: ret=0 03:57:04 point_skyscan result=0 03:57:04 Check angles 03:57:04 SkyScan query 03:57:05 SkyScan query done: ret=0 az=135.81<-9054 ze=-6.495<-12433 Statuses=0009 0008 03:57:05 Msec=0 True Az=135.81 Ze=-6.495 Az status=0009 Ze status=0008 03:57:05 Check angles 03:57:05 SkyScan query 03:57:06 SkyScan query done: ret=0 az=153.18<-10212 ze=-6.48<-12432 Statuses=0009 0008 03:57:06 Msec=750 True Az=153.18 Ze=-6.48 Az status=0009 Ze status=0008 03:57:06 Check angles 03:57:06 SkyScan query 03:57:06 SkyScan query done: ret=0 az=170.76<-11384 ze=-6.48<-12432 Statuses=0009 0008 03:57:06 Msec=1500 True Az=170.76 Ze=-6.48 Az status=0009 Ze status=0008 03:57:07 Check angles 03:57:07 SkyScan query 03:57:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:57:07 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 03:57:07 Message to Master queued w/err=0: serial=38640 error=0 03:57:12 Received message from Master: op=Filter serial=38641 03:57:12 Color wheel filter change from 0 to 0 03:57:12 FLIGetFilterPos err=0 currentPosition=0 03:57:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:12 Filter is already there-color wheel unchanged 03:57:12 Received message from Master: op=Shutter serial=38642 03:57:12 Shutter LASER close 03:57:12 Received message from Camera: op=State serial=38644 03:57:12 GetSingleValue result=40 Value=cccccccc 03:57:12 SkyScan query 03:57:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:57:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:13 Parameters OK 03:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:13 Set A/D data flow result=40 03:57:13 Set A/D channel type result=40 03:57:13 Set A/D encoding result=40 03:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:13 Set channel filter=0.000000e+000 result=40 03:57:13 Config A/D Result=40 03:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:13 Get A/D filter: -9.255963e+061 result=40 03:57:13 Get A/D value=-858993460 result=40 03:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:13 Parameters OK 03:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:13 Set A/D data flow result=40 03:57:13 Set A/D channel type result=40 03:57:13 Set A/D encoding result=40 03:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:13 Set channel filter=0.000000e+000 result=40 03:57:13 Config A/D Result=40 03:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:13 Get A/D filter: -9.255963e+061 result=40 03:57:13 Get A/D value=-858993460 result=40 03:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:13 Aux= 03:57:13 Message to Camera, serial 38644 queued 03:57:50 Received message from Master: op=PointingHead serial=38657 03:57:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:57:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:57:50 Point started: ret=0 03:57:50 point_skyscan result=0 03:57:51 Check angles 03:57:51 SkyScan query 03:57:51 SkyScan query done: ret=0 az=153.09<-10206 ze=6.51<-11566 Statuses=0009 0008 03:57:51 Msec=0 True Az=153.09 Ze=6.51 Az status=0009 Ze status=0008 03:57:52 Check angles 03:57:52 SkyScan query 03:57:52 SkyScan query done: ret=0 az=135.195<-9013 ze=6.495<-11567 Statuses=0009 0008 03:57:52 Msec=750 True Az=135.195 Ze=6.495 Az status=0009 Ze status=0008 03:57:52 Check angles 03:57:52 SkyScan query 03:57:53 SkyScan query done: ret=0 az=117.27<-7818 ze=6.495<-11567 Statuses=0009 0008 03:57:53 Msec=1500 True Az=117.27 Ze=6.495 Az status=0009 Ze status=0008 03:57:53 Check angles 03:57:53 SkyScan query 03:57:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:57:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:57:54 Message to Master queued w/err=0: serial=38657 error=0 03:57:59 Received message from Master: op=Filter serial=38658 03:57:59 Color wheel filter change from 0 to 0 03:57:59 FLIGetFilterPos err=0 currentPosition=0 03:57:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:59 Filter is already there-color wheel unchanged 03:57:59 Received message from Master: op=Shutter serial=38659 03:57:59 Shutter LASER close 03:57:59 Received message from Camera: op=State serial=38661 03:57:59 GetSingleValue result=40 Value=cccccccc 03:57:59 SkyScan query 03:58:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:58:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:00 Parameters OK 03:58:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:00 Set A/D data flow result=40 03:58:00 Set A/D channel type result=40 03:58:00 Set A/D encoding result=40 03:58:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:00 Set channel filter=0.000000e+000 result=40 03:58:00 Config A/D Result=40 03:58:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:00 Get A/D filter: -9.255963e+061 result=40 03:58:00 Get A/D value=-858993460 result=40 03:58:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:00 Parameters OK 03:58:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:00 Set A/D data flow result=40 03:58:00 Set A/D channel type result=40 03:58:00 Set A/D encoding result=40 03:58:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:00 Set channel filter=0.000000e+000 result=40 03:58:00 Config A/D Result=40 03:58:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:00 Get A/D filter: -9.255963e+061 result=40 03:58:00 Get A/D value=-858993460 result=40 03:58:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:00 Aux= 03:58:00 Message to Camera, serial 38661 queued 03:58:36 Received message from Master: op=PointingHead serial=38674 03:58:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:58:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:58:37 Point started: ret=0 03:58:37 point_skyscan result=0 03:58:38 Check angles 03:58:38 SkyScan query 03:58:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 03:58:38 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 03:58:38 Check angles 03:58:38 SkyScan query 03:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 03:58:39 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 03:58:39 Check angles 03:58:39 SkyScan query 03:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 03:58:40 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 03:58:40 Check angles 03:58:40 SkyScan query 03:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.175<-17745 Statuses=0008 0009 03:58:40 Msec=2250 True Az=112.995 Ze=-86.175 Az status=0008 Ze status=0009 03:58:41 Check angles 03:58:41 SkyScan query 03:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.565<-19171 Statuses=0008 0009 03:58:41 Msec=3000 True Az=112.995 Ze=-107.565 Az status=0008 Ze status=0009 03:58:41 Check angles 03:58:41 SkyScan query 03:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.505<-20567 Statuses=0008 0009 03:58:42 Msec=3750 True Az=112.995 Ze=-128.505 Az status=0008 Ze status=0009 03:58:42 Check angles 03:58:42 SkyScan query 03:58:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.475<-21965 Statuses=0008 0009 03:58:43 Msec=4500 True Az=112.995 Ze=-149.475 Az status=0008 Ze status=0009 03:58:43 Check angles 03:58:43 SkyScan query 03:58:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 03:58:43 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 03:58:44 Check angles 03:58:44 SkyScan query 03:58:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:58:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:58:44 Message to Master queued w/err=0: serial=38674 error=0 03:58:49 Received message from Master: op=Filter serial=38675 03:58:49 Color wheel filter change from 0 to 0 03:58:49 FLIGetFilterPos err=0 currentPosition=0 03:58:49 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:49 Filter is already there-color wheel unchanged 03:58:49 Received message from Master: op=Shutter serial=38676 03:58:49 Shutter LASER open 03:58:50 Received message from Camera: op=State serial=38678 03:58:50 GetSingleValue result=40 Value=cccccccc 03:58:50 SkyScan query 03:58:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:58:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:50 Parameters OK 03:58:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:50 Set A/D data flow result=40 03:58:50 Set A/D channel type result=40 03:58:50 Set A/D encoding result=40 03:58:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:50 Set channel filter=0.000000e+000 result=40 03:58:50 Config A/D Result=40 03:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:50 Get A/D filter: -9.255963e+061 result=40 03:58:50 Get A/D value=-858993460 result=40 03:58:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:50 Parameters OK 03:58:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:50 Set A/D data flow result=40 03:58:50 Set A/D channel type result=40 03:58:50 Set A/D encoding result=40 03:58:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:50 Set channel filter=0.000000e+000 result=40 03:58:50 Config A/D Result=40 03:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:50 Get A/D filter: -9.255963e+061 result=40 03:58:50 Get A/D value=-858993460 result=40 03:58:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:50 Aux= 03:58:50 Message to Camera, serial 38678 queued 03:58:59 Received message from Master: op=Shutter serial=38688 03:58:59 Shutter LASER close 03:58:59 Received message from Master: op=PointingHead serial=38692 03:58:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:58:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:58:59 Point started: ret=0 03:58:59 point_skyscan result=0 03:59:00 Check angles 03:59:00 SkyScan query 03:59:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 03:59:01 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 03:59:01 Check angles 03:59:01 SkyScan query 03:59:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 03:59:01 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 03:59:02 Check angles 03:59:02 SkyScan query 03:59:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 03:59:02 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 03:59:02 Check angles 03:59:02 SkyScan query 03:59:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.325<-17355 Statuses=0008 0009 03:59:03 Msec=2250 True Az=112.995 Ze=-80.325 Az status=0008 Ze status=0009 03:59:03 Check angles 03:59:03 SkyScan query 03:59:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.95<-15930 Statuses=0008 0009 03:59:04 Msec=3000 True Az=112.995 Ze=-58.95 Az status=0008 Ze status=0009 03:59:04 Check angles 03:59:04 SkyScan query 03:59:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.965<-14531 Statuses=0008 0009 03:59:04 Msec=3750 True Az=112.995 Ze=-37.965 Az status=0008 Ze status=0009 03:59:05 Check angles 03:59:05 SkyScan query 03:59:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.025<-13135 Statuses=0008 0009 03:59:05 Msec=4500 True Az=112.995 Ze=-17.025 Az status=0008 Ze status=0009 03:59:05 Check angles 03:59:05 SkyScan query 03:59:06 SkyScan query done: ret=0 az=112.995<-7533 ze=3.93<-11738 Statuses=0008 0009 03:59:06 Msec=5250 True Az=112.995 Ze=3.93 Az status=0008 Ze status=0009 03:59:06 Check angles 03:59:06 SkyScan query 03:59:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:59:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:59:07 Message to Master queued w/err=0: serial=38692 error=0 03:59:12 Received message from Master: op=Filter serial=38693 03:59:12 Color wheel filter change from 0 to 0 03:59:12 FLIGetFilterPos err=0 currentPosition=0 03:59:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:12 Filter is already there-color wheel unchanged 03:59:12 Received message from Master: op=Shutter serial=38694 03:59:12 Shutter LASER close 03:59:12 Received message from Camera: op=State serial=38696 03:59:12 GetSingleValue result=40 Value=cccccccc 03:59:12 SkyScan query 03:59:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:13 Parameters OK 03:59:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:13 Set A/D data flow result=40 03:59:13 Set A/D channel type result=40 03:59:13 Set A/D encoding result=40 03:59:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:13 Set channel filter=0.000000e+000 result=40 03:59:13 Config A/D Result=40 03:59:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:13 Get A/D filter: -9.255963e+061 result=40 03:59:13 Get A/D value=-858993460 result=40 03:59:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:13 Parameters OK 03:59:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:13 Set A/D data flow result=40 03:59:13 Set A/D channel type result=40 03:59:13 Set A/D encoding result=40 03:59:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:13 Set channel filter=0.000000e+000 result=40 03:59:13 Config A/D Result=40 03:59:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:13 Get A/D filter: -9.255963e+061 result=40 03:59:13 Get A/D value=-858993460 result=40 03:59:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:13 Aux= 03:59:13 Message to Camera, serial 38696 queued 03:59:49 Received message from Master: op=PointingHead serial=38709 03:59:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:59:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:59:50 Point started: ret=0 03:59:50 point_skyscan result=0 03:59:50 Check angles 03:59:50 SkyScan query 03:59:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:59:51 Message to Master queued w/err=0: serial=38709 error=0 03:59:56 Received message from Master: op=Filter serial=38710 03:59:56 Color wheel filter change from 0 to 0 03:59:56 FLIGetFilterPos err=0 currentPosition=0 03:59:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:56 Filter is already there-color wheel unchanged 03:59:56 Received message from Master: op=Shutter serial=38711 03:59:56 Shutter LASER close 03:59:56 Received message from Camera: op=State serial=38713 03:59:56 GetSingleValue result=40 Value=cccccccc 03:59:56 SkyScan query 03:59:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:57 Parameters OK 03:59:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:57 Set A/D data flow result=40 03:59:57 Set A/D channel type result=40 03:59:57 Set A/D encoding result=40 03:59:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:57 Set channel filter=0.000000e+000 result=40 03:59:57 Config A/D Result=40 03:59:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:57 Get A/D filter: -9.255963e+061 result=40 03:59:57 Get A/D value=-858993460 result=40 03:59:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:57 Parameters OK 03:59:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:57 Set A/D data flow result=40 03:59:57 Set A/D channel type result=40 03:59:57 Set A/D encoding result=40 03:59:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:57 Set channel filter=0.000000e+000 result=40 03:59:57 Config A/D Result=40 03:59:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:57 Get A/D filter: -9.255963e+061 result=40 03:59:57 Get A/D value=-858993460 result=40 03:59:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:57 Aux= 03:59:57 Message to Camera, serial 38713 queued 04:00:34 Received message from Master: op=PointingHead serial=38726 04:00:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:00:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:00:34 Point started: ret=0 04:00:34 point_skyscan result=0 04:00:35 Check angles 04:00:35 SkyScan query 04:00:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:00:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:00:35 Message to Master queued w/err=0: serial=38726 error=0 04:00:40 Received message from Master: op=Filter serial=38727 04:00:40 Color wheel filter change from 0 to 0 04:00:40 FLIGetFilterPos err=0 currentPosition=0 04:00:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:40 Filter is already there-color wheel unchanged 04:00:41 Received message from Master: op=Shutter serial=38728 04:00:41 Shutter LASER close 04:00:41 Received message from Camera: op=State serial=38730 04:00:41 GetSingleValue result=40 Value=cccccccc 04:00:41 SkyScan query 04:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:00:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:41 Parameters OK 04:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:41 Set A/D data flow result=40 04:00:41 Set A/D channel type result=40 04:00:41 Set A/D encoding result=40 04:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:41 Set channel filter=0.000000e+000 result=40 04:00:41 Config A/D Result=40 04:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:41 Get A/D filter: -9.255963e+061 result=40 04:00:41 Get A/D value=-858993460 result=40 04:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:41 Parameters OK 04:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:41 Set A/D data flow result=40 04:00:41 Set A/D channel type result=40 04:00:41 Set A/D encoding result=40 04:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:41 Set channel filter=0.000000e+000 result=40 04:00:41 Config A/D Result=40 04:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:41 Get A/D filter: -9.255963e+061 result=40 04:00:41 Get A/D value=-858993460 result=40 04:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:41 Aux= 04:00:41 Message to Camera, serial 38730 queued 04:01:18 Received message from Master: op=PointingHead serial=38743 04:01:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:01:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:01:18 Point started: ret=0 04:01:18 point_skyscan result=0 04:01:19 Check angles 04:01:19 SkyScan query 04:01:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:01:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:01:20 Message to Master queued w/err=0: serial=38743 error=0 04:01:25 Received message from Master: op=Filter serial=38744 04:01:25 Color wheel filter change from 0 to 0 04:01:25 FLIGetFilterPos err=0 currentPosition=0 04:01:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:25 Filter is already there-color wheel unchanged 04:01:25 Received message from Master: op=Shutter serial=38745 04:01:25 Shutter LASER close 04:01:25 Received message from Camera: op=State serial=38747 04:01:25 GetSingleValue result=40 Value=cccccccc 04:01:25 SkyScan query 04:01:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:01:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:25 Parameters OK 04:01:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:25 Set A/D data flow result=40 04:01:25 Set A/D channel type result=40 04:01:25 Set A/D encoding result=40 04:01:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:25 Set channel filter=0.000000e+000 result=40 04:01:25 Config A/D Result=40 04:01:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:25 Get A/D filter: -9.255963e+061 result=40 04:01:25 Get A/D value=-858993460 result=40 04:01:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:25 Parameters OK 04:01:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:25 Set A/D data flow result=40 04:01:25 Set A/D channel type result=40 04:01:25 Set A/D encoding result=40 04:01:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:25 Set channel filter=0.000000e+000 result=40 04:01:25 Config A/D Result=40 04:01:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:25 Get A/D filter: -9.255963e+061 result=40 04:01:25 Get A/D value=-858993460 result=40 04:01:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:25 Aux= 04:01:25 Message to Camera, serial 38747 queued 04:02:02 Received message from Master: op=PointingHead serial=38760 04:02:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:02:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:02:03 Point started: ret=0 04:02:03 point_skyscan result=0 04:02:03 Check angles 04:02:03 SkyScan query 04:02:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 04:02:04 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 04:02:04 Check angles 04:02:04 SkyScan query 04:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 04:02:05 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 04:02:05 Check angles 04:02:05 SkyScan query 04:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 04:02:05 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 04:02:06 Check angles 04:02:06 SkyScan query 04:02:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 04:02:06 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 04:02:06 Check angles 04:02:06 SkyScan query 04:02:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.64<-19176 Statuses=0008 0009 04:02:07 Msec=3000 True Az=112.995 Ze=-107.64 Az status=0008 Ze status=0009 04:02:07 Check angles 04:02:07 SkyScan query 04:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 04:02:08 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 04:02:08 Check angles 04:02:08 SkyScan query 04:02:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.405<-22027 Statuses=0008 0009 04:02:09 Msec=4500 True Az=112.995 Ze=-150.405 Az status=0008 Ze status=0009 04:02:09 Check angles 04:02:09 SkyScan query 04:02:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0008 0009 04:02:09 Msec=5250 True Az=112.995 Ze=-171.18 Az status=0008 Ze status=0009 04:02:09 Check angles 04:02:09 SkyScan query 04:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:02:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:02:10 Message to Master queued w/err=0: serial=38760 error=0 04:02:15 Received message from Master: op=Filter serial=38761 04:02:15 Color wheel filter change from 0 to 0 04:02:15 FLIGetFilterPos err=0 currentPosition=0 04:02:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:15 Filter is already there-color wheel unchanged 04:02:15 Received message from Master: op=Shutter serial=38762 04:02:15 Shutter LASER open 04:02:15 Received message from Camera: op=State serial=38764 04:02:15 GetSingleValue result=40 Value=cccccccc 04:02:15 SkyScan query 04:02:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:02:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:16 Parameters OK 04:02:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:16 Set A/D data flow result=40 04:02:16 Set A/D channel type result=40 04:02:16 Set A/D encoding result=40 04:02:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:16 Set channel filter=0.000000e+000 result=40 04:02:16 Config A/D Result=40 04:02:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:16 Get A/D filter: -9.255963e+061 result=40 04:02:16 Get A/D value=-858993460 result=40 04:02:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:16 Parameters OK 04:02:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:16 Set A/D data flow result=40 04:02:16 Set A/D channel type result=40 04:02:16 Set A/D encoding result=40 04:02:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:16 Set channel filter=0.000000e+000 result=40 04:02:16 Config A/D Result=40 04:02:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:16 Get A/D filter: -9.255963e+061 result=40 04:02:16 Get A/D value=-858993460 result=40 04:02:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:16 Aux= 04:02:16 Message to Camera, serial 38764 queued 04:02:24 Received message from Master: op=Shutter serial=38774 04:02:24 Shutter LASER close 04:02:25 Received message from Master: op=PointingHead serial=38778 04:02:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:02:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:02:25 Point started: ret=0 04:02:25 point_skyscan result=0 04:02:26 Check angles 04:02:26 SkyScan query 04:02:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.89<-21526 Statuses=0008 0009 04:02:27 Msec=0 True Az=112.995 Ze=-142.89 Az status=0008 Ze status=0009 04:02:27 Check angles 04:02:27 SkyScan query 04:02:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 04:02:27 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 04:02:28 Check angles 04:02:28 SkyScan query 04:02:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.575<-18705 Statuses=0008 0009 04:02:28 Msec=1500 True Az=112.995 Ze=-100.575 Az status=0008 Ze status=0009 04:02:28 Check angles 04:02:28 SkyScan query 04:02:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.59<-17306 Statuses=0008 0009 04:02:29 Msec=2250 True Az=112.995 Ze=-79.59 Az status=0008 Ze status=0009 04:02:29 Check angles 04:02:29 SkyScan query 04:02:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.65<-15910 Statuses=0008 0009 04:02:30 Msec=3000 True Az=112.995 Ze=-58.65 Az status=0008 Ze status=0009 04:02:30 Check angles 04:02:30 SkyScan query 04:02:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 04:02:30 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 04:02:31 Check angles 04:02:31 SkyScan query 04:02:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.725<-13115 Statuses=0008 0009 04:02:31 Msec=4500 True Az=112.995 Ze=-16.725 Az status=0008 Ze status=0009 04:02:31 Check angles 04:02:31 SkyScan query 04:02:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 04:02:32 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 04:02:32 Check angles 04:02:32 SkyScan query 04:02:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:02:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:02:33 Message to Master queued w/err=0: serial=38778 error=0 04:02:38 Received message from Master: op=Filter serial=38779 04:02:38 Color wheel filter change from 0 to 0 04:02:38 FLIGetFilterPos err=0 currentPosition=0 04:02:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:38 Filter is already there-color wheel unchanged 04:02:38 Received message from Master: op=Shutter serial=38780 04:02:38 Shutter LASER close 04:02:38 Received message from Camera: op=State serial=38782 04:02:38 GetSingleValue result=40 Value=cccccccc 04:02:38 SkyScan query 04:02:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:02:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:39 Parameters OK 04:02:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:39 Set A/D data flow result=40 04:02:39 Set A/D channel type result=40 04:02:39 Set A/D encoding result=40 04:02:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:39 Set channel filter=0.000000e+000 result=40 04:02:39 Config A/D Result=40 04:02:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:39 Get A/D filter: -9.255963e+061 result=40 04:02:39 Get A/D value=-858993460 result=40 04:02:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:39 Parameters OK 04:02:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:39 Set A/D data flow result=40 04:02:39 Set A/D channel type result=40 04:02:39 Set A/D encoding result=40 04:02:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:39 Set channel filter=0.000000e+000 result=40 04:02:39 Config A/D Result=40 04:02:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:39 Get A/D filter: -9.255963e+061 result=40 04:02:39 Get A/D value=-858993460 result=40 04:02:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:39 Aux= 04:02:39 Message to Camera, serial 38782 queued 04:03:15 Received message from Master: op=PointingHead serial=38795 04:03:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:03:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:03:16 Point started: ret=0 04:03:16 point_skyscan result=0 04:03:16 Check angles 04:03:16 SkyScan query 04:03:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:03:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:03:17 Message to Master queued w/err=0: serial=38795 error=0 04:03:22 Received message from Master: op=Filter serial=38796 04:03:22 Color wheel filter change from 0 to 0 04:03:22 FLIGetFilterPos err=0 currentPosition=0 04:03:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:22 Filter is already there-color wheel unchanged 04:03:22 Received message from Master: op=Shutter serial=38797 04:03:22 Shutter LASER close 04:03:22 Received message from Camera: op=State serial=38799 04:03:22 GetSingleValue result=40 Value=cccccccc 04:03:22 SkyScan query 04:03:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:03:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:23 Parameters OK 04:03:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:23 Set A/D data flow result=40 04:03:23 Set A/D channel type result=40 04:03:23 Set A/D encoding result=40 04:03:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:23 Set channel filter=0.000000e+000 result=40 04:03:23 Config A/D Result=40 04:03:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:23 Get A/D filter: -9.255963e+061 result=40 04:03:23 Get A/D value=-858993460 result=40 04:03:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:23 Parameters OK 04:03:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:23 Set A/D data flow result=40 04:03:23 Set A/D channel type result=40 04:03:23 Set A/D encoding result=40 04:03:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:23 Set channel filter=0.000000e+000 result=40 04:03:23 Config A/D Result=40 04:03:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:23 Get A/D filter: -9.255963e+061 result=40 04:03:23 Get A/D value=-858993460 result=40 04:03:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:23 Aux= 04:03:23 Message to Camera, serial 38799 queued 04:03:38 Received message from Master: op=Identify serial=38800 [UTC 2019-3-1 04:03:50] 04:04:00 Received message from Master: op=PointingHead serial=38815 04:04:00 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:04:00 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:04:00 Point started: ret=0 04:04:00 point_skyscan result=0 04:04:01 Check angles 04:04:01 SkyScan query 04:04:01 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.495<-12433 Statuses=0009 0008 04:04:01 Msec=0 True Az=136.095 Ze=-6.495 Az status=0009 Ze status=0008 04:04:02 Check angles 04:04:02 SkyScan query 04:04:02 SkyScan query done: ret=0 az=154.005<-10267 ze=-6.48<-12432 Statuses=0009 0008 04:04:02 Msec=750 True Az=154.005 Ze=-6.48 Az status=0009 Ze status=0008 04:04:02 Check angles 04:04:02 SkyScan query 04:04:03 SkyScan query done: ret=0 az=171.45<-11430 ze=-6.48<-12432 Statuses=0009 0008 04:04:03 Msec=1500 True Az=171.45 Ze=-6.48 Az status=0009 Ze status=0008 04:04:03 Check angles 04:04:03 SkyScan query 04:04:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:04:04 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 04:04:04 Message to Master queued w/err=0: serial=38815 error=0 04:04:09 Received message from Master: op=Filter serial=38816 04:04:09 Color wheel filter change from 0 to 0 04:04:09 FLIGetFilterPos err=0 currentPosition=0 04:04:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:09 Filter is already there-color wheel unchanged 04:04:09 Received message from Master: op=Shutter serial=38817 04:04:09 Shutter LASER close 04:04:09 Received message from Camera: op=State serial=38819 04:04:09 GetSingleValue result=40 Value=cccccccc 04:04:09 SkyScan query 04:04:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:04:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:09 Parameters OK 04:04:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:09 Set A/D data flow result=40 04:04:09 Set A/D channel type result=40 04:04:09 Set A/D encoding result=40 04:04:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:09 Set channel filter=0.000000e+000 result=40 04:04:09 Config A/D Result=40 04:04:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:09 Get A/D filter: -9.255963e+061 result=40 04:04:09 Get A/D value=-858993460 result=40 04:04:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:09 Parameters OK 04:04:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:09 Set A/D data flow result=40 04:04:09 Set A/D channel type result=40 04:04:09 Set A/D encoding result=40 04:04:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:09 Set channel filter=0.000000e+000 result=40 04:04:09 Config A/D Result=40 04:04:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:09 Get A/D filter: -9.255963e+061 result=40 04:04:09 Get A/D value=-858993460 result=40 04:04:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:09 Aux= 04:04:09 Message to Camera, serial 38819 queued 04:04:46 Received message from Master: op=PointingHead serial=38832 04:04:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:04:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:04:47 Point started: ret=0 04:04:47 point_skyscan result=0 04:04:47 Check angles 04:04:47 SkyScan query 04:04:48 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 04:04:48 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 04:04:48 Check angles 04:04:48 SkyScan query 04:04:49 SkyScan query done: ret=0 az=135.21<-9014 ze=6.495<-11567 Statuses=0009 0008 04:04:49 Msec=750 True Az=135.21 Ze=6.495 Az status=0009 Ze status=0008 04:04:49 Check angles 04:04:49 SkyScan query 04:04:50 SkyScan query done: ret=0 az=117.87<-7858 ze=6.495<-11567 Statuses=0009 0008 04:04:50 Msec=1500 True Az=117.87 Ze=6.495 Az status=0009 Ze status=0008 04:04:50 Check angles 04:04:50 SkyScan query 04:04:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:04:50 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:04:50 Message to Master queued w/err=0: serial=38832 error=0 04:04:55 Received message from Master: op=Filter serial=38833 04:04:55 Color wheel filter change from 0 to 0 04:04:55 FLIGetFilterPos err=0 currentPosition=0 04:04:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:55 Filter is already there-color wheel unchanged 04:04:55 Received message from Master: op=Shutter serial=38834 04:04:55 Shutter LASER close 04:04:55 Received message from Camera: op=State serial=38836 04:04:55 GetSingleValue result=40 Value=cccccccc 04:04:55 SkyScan query 04:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:04:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:56 Parameters OK 04:04:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:56 Set A/D data flow result=40 04:04:56 Set A/D channel type result=40 04:04:56 Set A/D encoding result=40 04:04:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:56 Set channel filter=0.000000e+000 result=40 04:04:56 Config A/D Result=40 04:04:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:56 Get A/D filter: -9.255963e+061 result=40 04:04:56 Get A/D value=-858993460 result=40 04:04:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:56 Parameters OK 04:04:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:56 Set A/D data flow result=40 04:04:56 Set A/D channel type result=40 04:04:56 Set A/D encoding result=40 04:04:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:56 Set channel filter=0.000000e+000 result=40 04:04:56 Config A/D Result=40 04:04:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:56 Get A/D filter: -9.255963e+061 result=40 04:04:56 Get A/D value=-858993460 result=40 04:04:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:56 Aux= 04:04:56 Message to Camera, serial 38836 queued 04:05:33 Received message from Master: op=PointingHead serial=38849 04:05:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:05:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:05:33 Point started: ret=0 04:05:33 point_skyscan result=0 04:05:34 Check angles 04:05:34 SkyScan query 04:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 04:05:35 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 04:05:35 Check angles 04:05:35 SkyScan query 04:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.325<-14955 Statuses=0008 0009 04:05:35 Msec=750 True Az=112.995 Ze=-44.325 Az status=0008 Ze status=0009 04:05:36 Check angles 04:05:36 SkyScan query 04:05:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 04:05:36 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 04:05:36 Check angles 04:05:36 SkyScan query 04:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 04:05:37 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 04:05:37 Check angles 04:05:37 SkyScan query 04:05:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.045<-19203 Statuses=0008 0009 04:05:38 Msec=3000 True Az=112.995 Ze=-108.045 Az status=0008 Ze status=0009 04:05:38 Check angles 04:05:38 SkyScan query 04:05:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-129<-20600 Statuses=0008 0009 04:05:38 Msec=3750 True Az=112.995 Ze=-129 Az status=0008 Ze status=0009 04:05:39 Check angles 04:05:39 SkyScan query 04:05:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.955<-21997 Statuses=0008 0009 04:05:39 Msec=4500 True Az=112.995 Ze=-149.955 Az status=0008 Ze status=0009 04:05:39 Check angles 04:05:39 SkyScan query 04:05:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0008 0009 04:05:40 Msec=5250 True Az=112.995 Ze=-171.18 Az status=0008 Ze status=0009 04:05:40 Check angles 04:05:40 SkyScan query 04:05:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:05:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:05:41 Message to Master queued w/err=0: serial=38849 error=0 04:05:46 Received message from Master: op=Filter serial=38850 04:05:46 Color wheel filter change from 0 to 0 04:05:46 FLIGetFilterPos err=0 currentPosition=0 04:05:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:46 Filter is already there-color wheel unchanged 04:05:46 Received message from Master: op=Shutter serial=38851 04:05:46 Shutter LASER open 04:05:46 Received message from Camera: op=State serial=38853 04:05:46 GetSingleValue result=40 Value=cccccccc 04:05:46 SkyScan query 04:05:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:05:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:47 Parameters OK 04:05:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:47 Set A/D data flow result=40 04:05:47 Set A/D channel type result=40 04:05:47 Set A/D encoding result=40 04:05:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:47 Set channel filter=0.000000e+000 result=40 04:05:47 Config A/D Result=40 04:05:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:47 Get A/D filter: -9.255963e+061 result=40 04:05:47 Get A/D value=-858993460 result=40 04:05:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:47 Parameters OK 04:05:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:47 Set A/D data flow result=40 04:05:47 Set A/D channel type result=40 04:05:47 Set A/D encoding result=40 04:05:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:47 Set channel filter=0.000000e+000 result=40 04:05:47 Config A/D Result=40 04:05:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:47 Get A/D filter: -9.255963e+061 result=40 04:05:47 Get A/D value=-858993460 result=40 04:05:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:47 Aux= 04:05:47 Message to Camera, serial 38853 queued 04:05:55 Received message from Master: op=Shutter serial=38863 04:05:55 Shutter LASER close 04:05:55 Received message from Master: op=PointingHead serial=38867 04:05:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:05:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:05:56 Point started: ret=0 04:05:56 point_skyscan result=0 04:05:57 Check angles 04:05:57 SkyScan query 04:05:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 04:05:57 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 04:05:57 Check angles 04:05:57 SkyScan query 04:05:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 04:05:58 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 04:05:58 Check angles 04:05:58 SkyScan query 04:05:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.56<-18704 Statuses=0008 0009 04:05:59 Msec=1500 True Az=112.995 Ze=-100.56 Az status=0008 Ze status=0009 04:05:59 Check angles 04:05:59 SkyScan query 04:05:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.59<-17306 Statuses=0008 0009 04:05:59 Msec=2250 True Az=112.995 Ze=-79.59 Az status=0008 Ze status=0009 04:06:00 Check angles 04:06:00 SkyScan query 04:06:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.65<-15910 Statuses=0008 0009 04:06:00 Msec=3000 True Az=112.995 Ze=-58.65 Az status=0008 Ze status=0009 04:06:00 Check angles 04:06:00 SkyScan query 04:06:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.26<-14484 Statuses=0008 0009 04:06:01 Msec=3750 True Az=112.995 Ze=-37.26 Az status=0008 Ze status=0009 04:06:01 Check angles 04:06:01 SkyScan query 04:06:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.84<-13056 Statuses=0008 0009 04:06:02 Msec=4500 True Az=112.995 Ze=-15.84 Az status=0008 Ze status=0009 04:06:02 Check angles 04:06:02 SkyScan query 04:06:02 SkyScan query done: ret=0 az=112.995<-7533 ze=4.86<-11676 Statuses=0008 0009 04:06:02 Msec=5250 True Az=112.995 Ze=4.86 Az status=0008 Ze status=0009 04:06:03 Check angles 04:06:03 SkyScan query 04:06:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:06:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:06:03 Message to Master queued w/err=0: serial=38867 error=0 04:06:08 Received message from Master: op=Filter serial=38868 04:06:08 Color wheel filter change from 0 to 0 04:06:08 FLIGetFilterPos err=0 currentPosition=0 04:06:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:08 Filter is already there-color wheel unchanged 04:06:08 Received message from Master: op=Shutter serial=38869 04:06:08 Shutter LASER close 04:06:09 Received message from Camera: op=State serial=38871 04:06:09 GetSingleValue result=40 Value=cccccccc 04:06:09 SkyScan query 04:06:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:09 Parameters OK 04:06:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:09 Set A/D data flow result=40 04:06:09 Set A/D channel type result=40 04:06:09 Set A/D encoding result=40 04:06:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:09 Set channel filter=0.000000e+000 result=40 04:06:09 Config A/D Result=40 04:06:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:09 Get A/D filter: -9.255963e+061 result=40 04:06:09 Get A/D value=-858993460 result=40 04:06:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:09 Parameters OK 04:06:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:09 Set A/D data flow result=40 04:06:09 Set A/D channel type result=40 04:06:09 Set A/D encoding result=40 04:06:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:09 Set channel filter=0.000000e+000 result=40 04:06:09 Config A/D Result=40 04:06:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:09 Get A/D filter: -9.255963e+061 result=40 04:06:09 Get A/D value=-858993460 result=40 04:06:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:09 Aux= 04:06:09 Message to Camera, serial 38871 queued 04:06:46 Received message from Master: op=PointingHead serial=38884 04:06:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:06:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:06:46 Point started: ret=0 04:06:46 point_skyscan result=0 04:06:47 Check angles 04:06:47 SkyScan query 04:06:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:06:48 Message to Master queued w/err=0: serial=38884 error=0 04:06:53 Received message from Master: op=Filter serial=38885 04:06:53 Color wheel filter change from 0 to 0 04:06:53 FLIGetFilterPos err=0 currentPosition=0 04:06:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:53 Filter is already there-color wheel unchanged 04:06:53 Received message from Master: op=Shutter serial=38886 04:06:53 Shutter LASER close 04:06:53 Received message from Camera: op=State serial=38888 04:06:53 GetSingleValue result=40 Value=cccccccc 04:06:53 SkyScan query 04:06:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:53 Parameters OK 04:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:53 Set A/D data flow result=40 04:06:53 Set A/D channel type result=40 04:06:53 Set A/D encoding result=40 04:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:53 Set channel filter=0.000000e+000 result=40 04:06:53 Config A/D Result=40 04:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:53 Get A/D filter: -9.255963e+061 result=40 04:06:53 Get A/D value=-858993460 result=40 04:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:53 Parameters OK 04:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:53 Set A/D data flow result=40 04:06:53 Set A/D channel type result=40 04:06:53 Set A/D encoding result=40 04:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:53 Set channel filter=0.000000e+000 result=40 04:06:53 Config A/D Result=40 04:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:53 Get A/D filter: -9.255963e+061 result=40 04:06:53 Get A/D value=-858993460 result=40 04:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:53 Aux= 04:06:53 Message to Camera, serial 38888 queued 04:07:30 Received message from Master: op=PointingHead serial=38901 04:07:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:07:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:07:31 Point started: ret=0 04:07:31 point_skyscan result=0 04:07:31 Check angles 04:07:31 SkyScan query 04:07:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:07:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:07:32 Message to Master queued w/err=0: serial=38901 error=0 04:07:37 Received message from Master: op=Filter serial=38902 04:07:37 Color wheel filter change from 0 to 0 04:07:37 FLIGetFilterPos err=0 currentPosition=0 04:07:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:37 Filter is already there-color wheel unchanged 04:07:37 Received message from Master: op=Shutter serial=38903 04:07:37 Shutter LASER close 04:07:37 Received message from Camera: op=State serial=38905 04:07:37 GetSingleValue result=40 Value=cccccccc 04:07:37 SkyScan query 04:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:07:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:38 Parameters OK 04:07:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:38 Set A/D data flow result=40 04:07:38 Set A/D channel type result=40 04:07:38 Set A/D encoding result=40 04:07:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:38 Set channel filter=0.000000e+000 result=40 04:07:38 Config A/D Result=40 04:07:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:38 Get A/D filter: -9.255963e+061 result=40 04:07:38 Get A/D value=-858993460 result=40 04:07:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:38 Parameters OK 04:07:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:38 Set A/D data flow result=40 04:07:38 Set A/D channel type result=40 04:07:38 Set A/D encoding result=40 04:07:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:38 Set channel filter=0.000000e+000 result=40 04:07:38 Config A/D Result=40 04:07:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:38 Get A/D filter: -9.255963e+061 result=40 04:07:38 Get A/D value=-858993460 result=40 04:07:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:38 Aux= 04:07:38 Message to Camera, serial 38905 queued 04:08:15 Received message from Master: op=PointingHead serial=38918 04:08:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:08:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:08:15 Point started: ret=0 04:08:15 point_skyscan result=0 04:08:16 Check angles 04:08:16 SkyScan query 04:08:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:08:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:08:16 Message to Master queued w/err=0: serial=38918 error=0 04:08:21 Received message from Master: op=Filter serial=38919 04:08:21 Color wheel filter change from 0 to 0 04:08:21 FLIGetFilterPos err=0 currentPosition=0 04:08:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:21 Filter is already there-color wheel unchanged 04:08:21 Received message from Master: op=Shutter serial=38920 04:08:21 Shutter LASER close 04:08:21 Received message from Camera: op=State serial=38922 04:08:21 GetSingleValue result=40 Value=cccccccc 04:08:21 SkyScan query 04:08:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:08:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:22 Parameters OK 04:08:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:22 Set A/D data flow result=40 04:08:22 Set A/D channel type result=40 04:08:22 Set A/D encoding result=40 04:08:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:22 Set channel filter=0.000000e+000 result=40 04:08:22 Config A/D Result=40 04:08:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:22 Get A/D filter: -9.255963e+061 result=40 04:08:22 Get A/D value=-858993460 result=40 04:08:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:22 Parameters OK 04:08:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:22 Set A/D data flow result=40 04:08:22 Set A/D channel type result=40 04:08:22 Set A/D encoding result=40 04:08:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:22 Set channel filter=0.000000e+000 result=40 04:08:22 Config A/D Result=40 04:08:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:22 Get A/D filter: -9.255963e+061 result=40 04:08:22 Get A/D value=-858993460 result=40 04:08:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:22 Aux= 04:08:22 Message to Camera, serial 38922 queued 04:08:59 Received message from Master: op=PointingHead serial=38935 04:08:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:08:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:08:59 Point started: ret=0 04:08:59 point_skyscan result=0 04:09:00 Check angles 04:09:00 SkyScan query 04:09:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.76<-13584 Statuses=0008 0009 04:09:01 Msec=0 True Az=112.995 Ze=-23.76 Az status=0008 Ze status=0009 04:09:01 Check angles 04:09:01 SkyScan query 04:09:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.135<-15009 Statuses=0008 0009 04:09:01 Msec=750 True Az=112.995 Ze=-45.135 Az status=0008 Ze status=0009 04:09:01 Check angles 04:09:01 SkyScan query 04:09:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.09<-16406 Statuses=0008 0009 04:09:02 Msec=1500 True Az=112.995 Ze=-66.09 Az status=0008 Ze status=0009 04:09:02 Check angles 04:09:02 SkyScan query 04:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 04:09:03 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 04:09:03 Check angles 04:09:03 SkyScan query 04:09:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.42<-19228 Statuses=0008 0009 04:09:04 Msec=3000 True Az=112.995 Ze=-108.42 Az status=0008 Ze status=0009 04:09:04 Check angles 04:09:04 SkyScan query 04:09:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.39<-20626 Statuses=0008 0009 04:09:04 Msec=3750 True Az=112.995 Ze=-129.39 Az status=0008 Ze status=0009 04:09:04 Check angles 04:09:04 SkyScan query 04:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.345<-22023 Statuses=0008 0009 04:09:05 Msec=4500 True Az=112.995 Ze=-150.345 Az status=0008 Ze status=0009 04:09:05 Check angles 04:09:05 SkyScan query 04:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 04:09:06 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 04:09:06 Check angles 04:09:06 SkyScan query 04:09:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:09:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:09:07 Message to Master queued w/err=0: serial=38935 error=0 04:09:12 Received message from Master: op=Filter serial=38936 04:09:12 Color wheel filter change from 0 to 0 04:09:12 FLIGetFilterPos err=0 currentPosition=0 04:09:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:12 Filter is already there-color wheel unchanged 04:09:12 Received message from Master: op=Shutter serial=38937 04:09:12 Shutter LASER open 04:09:12 Received message from Camera: op=State serial=38939 04:09:12 GetSingleValue result=40 Value=cccccccc 04:09:12 SkyScan query 04:09:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:09:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:12 Parameters OK 04:09:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:12 Set A/D data flow result=40 04:09:12 Set A/D channel type result=40 04:09:12 Set A/D encoding result=40 04:09:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:12 Set channel filter=0.000000e+000 result=40 04:09:12 Config A/D Result=40 04:09:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:12 Get A/D filter: -9.255963e+061 result=40 04:09:12 Get A/D value=-858993460 result=40 04:09:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:12 Parameters OK 04:09:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:12 Set A/D data flow result=40 04:09:12 Set A/D channel type result=40 04:09:12 Set A/D encoding result=40 04:09:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:12 Set channel filter=0.000000e+000 result=40 04:09:12 Config A/D Result=40 04:09:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:12 Get A/D filter: -9.255963e+061 result=40 04:09:12 Get A/D value=-858993460 result=40 04:09:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:12 Aux= 04:09:12 Message to Camera, serial 38939 queued 04:09:21 Received message from Master: op=Shutter serial=38949 04:09:21 Shutter LASER close 04:09:22 Received message from Master: op=PointingHead serial=38953 04:09:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:09:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:09:22 Point started: ret=0 04:09:22 point_skyscan result=0 04:09:23 Check angles 04:09:23 SkyScan query 04:09:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 04:09:23 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 04:09:23 Check angles 04:09:23 SkyScan query 04:09:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 04:09:24 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 04:09:24 Check angles 04:09:24 SkyScan query 04:09:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 04:09:25 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 04:09:25 Check angles 04:09:25 SkyScan query 04:09:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 04:09:26 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 04:09:26 Check angles 04:09:26 SkyScan query 04:09:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 04:09:26 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 04:09:26 Check angles 04:09:26 SkyScan query 04:09:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 04:09:27 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 04:09:27 Check angles 04:09:27 SkyScan query 04:09:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.665<-13111 Statuses=0008 0009 04:09:28 Msec=4500 True Az=112.995 Ze=-16.665 Az status=0008 Ze status=0009 04:09:28 Check angles 04:09:28 SkyScan query 04:09:29 SkyScan query done: ret=0 az=112.995<-7533 ze=4.26<-11716 Statuses=0008 0009 04:09:29 Msec=5250 True Az=112.995 Ze=4.26 Az status=0008 Ze status=0009 04:09:29 Check angles 04:09:29 SkyScan query 04:09:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:09:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:09:29 Message to Master queued w/err=0: serial=38953 error=0 04:09:34 Received message from Master: op=Filter serial=38954 04:09:34 Color wheel filter change from 0 to 0 04:09:34 FLIGetFilterPos err=0 currentPosition=0 04:09:34 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:34 Filter is already there-color wheel unchanged 04:09:34 Received message from Master: op=Shutter serial=38955 04:09:34 Shutter LASER close 04:09:35 Received message from Camera: op=State serial=38957 04:09:35 GetSingleValue result=40 Value=cccccccc 04:09:35 SkyScan query 04:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:09:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:35 Parameters OK 04:09:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:35 Set A/D data flow result=40 04:09:35 Set A/D channel type result=40 04:09:35 Set A/D encoding result=40 04:09:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:35 Set channel filter=0.000000e+000 result=40 04:09:35 Config A/D Result=40 04:09:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:35 Get A/D filter: -9.255963e+061 result=40 04:09:35 Get A/D value=-858993460 result=40 04:09:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:35 Parameters OK 04:09:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:35 Set A/D data flow result=40 04:09:35 Set A/D channel type result=40 04:09:35 Set A/D encoding result=40 04:09:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:35 Set channel filter=0.000000e+000 result=40 04:09:35 Config A/D Result=40 04:09:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:35 Get A/D filter: -9.255963e+061 result=40 04:09:35 Get A/D value=-858993460 result=40 04:09:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:35 Aux= 04:09:35 Message to Camera, serial 38957 queued 04:10:12 Received message from Master: op=PointingHead serial=38970 04:10:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:10:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:10:12 Point started: ret=0 04:10:12 point_skyscan result=0 04:10:13 Check angles 04:10:13 SkyScan query 04:10:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:10:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:10:14 Message to Master queued w/err=0: serial=38970 error=0 04:10:19 Received message from Master: op=Filter serial=38971 04:10:19 Color wheel filter change from 0 to 0 04:10:19 FLIGetFilterPos err=0 currentPosition=0 04:10:19 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:19 Filter is already there-color wheel unchanged 04:10:19 Received message from Master: op=Shutter serial=38972 04:10:19 Shutter LASER close 04:10:19 Received message from Camera: op=State serial=38974 04:10:19 GetSingleValue result=40 Value=cccccccc 04:10:19 SkyScan query 04:10:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:10:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:19 Parameters OK 04:10:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:19 Set A/D data flow result=40 04:10:19 Set A/D channel type result=40 04:10:19 Set A/D encoding result=40 04:10:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:19 Set channel filter=0.000000e+000 result=40 04:10:19 Config A/D Result=40 04:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:19 Get A/D filter: -9.255963e+061 result=40 04:10:19 Get A/D value=-858993460 result=40 04:10:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:19 Parameters OK 04:10:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:19 Set A/D data flow result=40 04:10:19 Set A/D channel type result=40 04:10:19 Set A/D encoding result=40 04:10:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:19 Set channel filter=0.000000e+000 result=40 04:10:19 Config A/D Result=40 04:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:19 Get A/D filter: -9.255963e+061 result=40 04:10:19 Get A/D value=-858993460 result=40 04:10:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:19 Aux= 04:10:19 Message to Camera, serial 38974 queued 04:10:56 Received message from Master: op=PointingHead serial=38987 04:10:56 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:10:56 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:10:57 Point started: ret=0 04:10:57 point_skyscan result=0 04:10:57 Check angles 04:10:57 SkyScan query 04:10:58 SkyScan query done: ret=0 az=136.29<-9086 ze=-6.495<-12433 Statuses=0009 0008 04:10:58 Msec=0 True Az=136.29 Ze=-6.495 Az status=0009 Ze status=0008 04:10:58 Check angles 04:10:58 SkyScan query 04:10:59 SkyScan query done: ret=0 az=154.08<-10272 ze=-6.48<-12432 Statuses=0009 0008 04:10:59 Msec=750 True Az=154.08 Ze=-6.48 Az status=0009 Ze status=0008 04:10:59 Check angles 04:10:59 SkyScan query 04:11:00 SkyScan query done: ret=0 az=171.615<-11441 ze=-6.48<-12432 Statuses=0009 0008 04:11:00 Msec=1500 True Az=171.615 Ze=-6.48 Az status=0009 Ze status=0008 04:11:00 Check angles 04:11:00 SkyScan query 04:11:00 SkyScan query done: ret=0 az=175.98<-11732 ze=-6.48<-12432 Statuses=0008 0008 04:11:00 Msec=2250 True Az=175.98 Ze=-6.48 Az status=0008 Ze status=0008 04:11:00 Message to Master queued w/err=0: serial=38987 error=0 04:11:05 Received message from Master: op=Filter serial=38988 04:11:05 Color wheel filter change from 0 to 0 04:11:05 FLIGetFilterPos err=0 currentPosition=0 04:11:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:05 Filter is already there-color wheel unchanged 04:11:05 Received message from Master: op=Shutter serial=38989 04:11:05 Shutter LASER close 04:11:05 Received message from Camera: op=State serial=38991 04:11:05 GetSingleValue result=40 Value=cccccccc 04:11:05 SkyScan query 04:11:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:11:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:06 Parameters OK 04:11:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:06 Set A/D data flow result=40 04:11:06 Set A/D channel type result=40 04:11:06 Set A/D encoding result=40 04:11:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:06 Set channel filter=0.000000e+000 result=40 04:11:06 Config A/D Result=40 04:11:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:06 Get A/D filter: -9.255963e+061 result=40 04:11:06 Get A/D value=-858993460 result=40 04:11:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:06 Parameters OK 04:11:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:06 Set A/D data flow result=40 04:11:06 Set A/D channel type result=40 04:11:06 Set A/D encoding result=40 04:11:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:06 Set channel filter=0.000000e+000 result=40 04:11:06 Config A/D Result=40 04:11:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:06 Get A/D filter: -9.255963e+061 result=40 04:11:06 Get A/D value=-858993460 result=40 04:11:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:06 Aux= 04:11:06 Message to Camera, serial 38991 queued 04:11:43 Received message from Master: op=PointingHead serial=39004 04:11:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:11:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:11:43 Point started: ret=0 04:11:43 point_skyscan result=0 04:11:44 Check angles 04:11:44 SkyScan query 04:11:45 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 04:11:45 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 04:11:45 Check angles 04:11:45 SkyScan query 04:11:45 SkyScan query done: ret=0 az=135.63<-9042 ze=6.495<-11567 Statuses=0009 0008 04:11:45 Msec=750 True Az=135.63 Ze=6.495 Az status=0009 Ze status=0008 04:11:45 Check angles 04:11:45 SkyScan query 04:11:46 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 04:11:46 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 04:11:46 Check angles 04:11:46 SkyScan query 04:11:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:11:47 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:11:47 Message to Master queued w/err=0: serial=39004 error=0 04:11:52 Received message from Master: op=Filter serial=39005 04:11:52 Color wheel filter change from 0 to 0 04:11:52 FLIGetFilterPos err=0 currentPosition=0 04:11:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:52 Filter is already there-color wheel unchanged 04:11:52 Received message from Master: op=Shutter serial=39006 04:11:52 Shutter LASER close 04:11:52 Received message from Camera: op=State serial=39008 04:11:52 GetSingleValue result=40 Value=cccccccc 04:11:52 SkyScan query 04:11:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:11:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:53 Parameters OK 04:11:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:53 Set A/D data flow result=40 04:11:53 Set A/D channel type result=40 04:11:53 Set A/D encoding result=40 04:11:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:53 Set channel filter=0.000000e+000 result=40 04:11:53 Config A/D Result=40 04:11:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:53 Get A/D filter: -9.255963e+061 result=40 04:11:53 Get A/D value=-858993460 result=40 04:11:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:53 Parameters OK 04:11:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:53 Set A/D data flow result=40 04:11:53 Set A/D channel type result=40 04:11:53 Set A/D encoding result=40 04:11:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:53 Set channel filter=0.000000e+000 result=40 04:11:53 Config A/D Result=40 04:11:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:53 Get A/D filter: -9.255963e+061 result=40 04:11:53 Get A/D value=-858993460 result=40 04:11:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:53 Aux= 04:11:53 Message to Camera, serial 39008 queued 04:12:29 Received message from Master: op=PointingHead serial=39021 04:12:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:12:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:12:30 Point started: ret=0 04:12:30 point_skyscan result=0 04:12:31 Check angles 04:12:31 SkyScan query 04:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 04:12:31 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 04:12:31 Check angles 04:12:31 SkyScan query 04:12:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 04:12:32 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 04:12:32 Check angles 04:12:32 SkyScan query 04:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 04:12:33 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 04:12:33 Check angles 04:12:33 SkyScan query 04:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.865<-17791 Statuses=0008 0009 04:12:33 Msec=2250 True Az=112.995 Ze=-86.865 Az status=0008 Ze status=0009 04:12:34 Check angles 04:12:34 SkyScan query 04:12:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.255<-19217 Statuses=0008 0009 04:12:34 Msec=3000 True Az=112.995 Ze=-108.255 Az status=0008 Ze status=0009 04:12:34 Check angles 04:12:34 SkyScan query 04:12:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.21<-20614 Statuses=0008 0009 04:12:35 Msec=3750 True Az=112.995 Ze=-129.21 Az status=0008 Ze status=0009 04:12:35 Check angles 04:12:35 SkyScan query 04:12:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.165<-22011 Statuses=0008 0009 04:12:36 Msec=4500 True Az=112.995 Ze=-150.165 Az status=0008 Ze status=0009 04:12:36 Check angles 04:12:36 SkyScan query 04:12:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0008 0009 04:12:36 Msec=5250 True Az=112.995 Ze=-170.985 Az status=0008 Ze status=0009 04:12:37 Check angles 04:12:37 SkyScan query 04:12:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:12:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:12:37 Message to Master queued w/err=0: serial=39021 error=0 04:12:42 Received message from Master: op=Filter serial=39022 04:12:42 Color wheel filter change from 0 to 0 04:12:42 FLIGetFilterPos err=0 currentPosition=0 04:12:42 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:42 Filter is already there-color wheel unchanged 04:12:42 Received message from Master: op=Shutter serial=39023 04:12:42 Shutter LASER open 04:12:43 Received message from Camera: op=State serial=39025 04:12:43 GetSingleValue result=40 Value=cccccccc 04:12:43 SkyScan query 04:12:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:12:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:43 Parameters OK 04:12:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:43 Set A/D data flow result=40 04:12:43 Set A/D channel type result=40 04:12:43 Set A/D encoding result=40 04:12:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:43 Set channel filter=0.000000e+000 result=40 04:12:43 Config A/D Result=40 04:12:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:43 Get A/D filter: -9.255963e+061 result=40 04:12:43 Get A/D value=-858993460 result=40 04:12:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:43 Parameters OK 04:12:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:43 Set A/D data flow result=40 04:12:43 Set A/D channel type result=40 04:12:43 Set A/D encoding result=40 04:12:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:43 Set channel filter=0.000000e+000 result=40 04:12:43 Config A/D Result=40 04:12:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:43 Get A/D filter: -9.255963e+061 result=40 04:12:43 Get A/D value=-858993460 result=40 04:12:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:43 Aux= 04:12:43 Message to Camera, serial 39025 queued 04:12:52 Received message from Master: op=Shutter serial=39035 04:12:52 Shutter LASER close 04:12:52 Received message from Master: op=PointingHead serial=39039 04:12:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:12:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:12:52 Point started: ret=0 04:12:52 point_skyscan result=0 04:12:53 Check angles 04:12:53 SkyScan query 04:12:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 04:12:54 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 04:12:54 Check angles 04:12:54 SkyScan query 04:12:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.475<-20165 Statuses=0008 0009 04:12:54 Msec=750 True Az=112.995 Ze=-122.475 Az status=0008 Ze status=0009 04:12:55 Check angles 04:12:55 SkyScan query 04:12:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.49<-18766 Statuses=0008 0009 04:12:55 Msec=1500 True Az=112.995 Ze=-101.49 Az status=0008 Ze status=0009 04:12:55 Check angles 04:12:55 SkyScan query 04:12:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.535<-17369 Statuses=0008 0009 04:12:56 Msec=2250 True Az=112.995 Ze=-80.535 Az status=0008 Ze status=0009 04:12:56 Check angles 04:12:56 SkyScan query 04:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.58<-15972 Statuses=0008 0009 04:12:57 Msec=3000 True Az=112.995 Ze=-59.58 Az status=0008 Ze status=0009 04:12:57 Check angles 04:12:57 SkyScan query 04:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 04:12:57 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 04:12:58 Check angles 04:12:58 SkyScan query 04:12:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.235<-13149 Statuses=0008 0009 04:12:58 Msec=4500 True Az=112.995 Ze=-17.235 Az status=0008 Ze status=0009 04:12:58 Check angles 04:12:58 SkyScan query 04:12:59 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 04:12:59 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 04:12:59 Check angles 04:12:59 SkyScan query 04:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:13:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:13:00 Message to Master queued w/err=0: serial=39039 error=0 04:13:05 Received message from Master: op=Filter serial=39040 04:13:05 Color wheel filter change from 0 to 0 04:13:05 FLIGetFilterPos err=0 currentPosition=0 04:13:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:05 Filter is already there-color wheel unchanged 04:13:05 Received message from Master: op=Shutter serial=39041 04:13:05 Shutter LASER close 04:13:05 Received message from Camera: op=State serial=39043 04:13:05 GetSingleValue result=40 Value=cccccccc 04:13:05 SkyScan query 04:13:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:13:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:06 Parameters OK 04:13:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:06 Set A/D data flow result=40 04:13:06 Set A/D channel type result=40 04:13:06 Set A/D encoding result=40 04:13:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:06 Set channel filter=0.000000e+000 result=40 04:13:06 Config A/D Result=40 04:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:06 Get A/D filter: -9.255963e+061 result=40 04:13:06 Get A/D value=-858993460 result=40 04:13:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:06 Parameters OK 04:13:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:06 Set A/D data flow result=40 04:13:06 Set A/D channel type result=40 04:13:06 Set A/D encoding result=40 04:13:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:06 Set channel filter=0.000000e+000 result=40 04:13:06 Config A/D Result=40 04:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:06 Get A/D filter: -9.255963e+061 result=40 04:13:06 Get A/D value=-858993460 result=40 04:13:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:06 Aux= 04:13:06 Message to Camera, serial 39043 queued 04:13:42 Received message from Master: op=PointingHead serial=39056 04:13:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:13:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:13:43 Point started: ret=0 04:13:43 point_skyscan result=0 04:13:44 Check angles 04:13:44 SkyScan query 04:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:13:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:13:44 Message to Master queued w/err=0: serial=39056 error=0 04:13:49 Received message from Master: op=Filter serial=39057 04:13:49 Color wheel filter change from 0 to 0 04:13:49 FLIGetFilterPos err=0 currentPosition=0 04:13:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:49 Filter is already there-color wheel unchanged 04:13:49 Received message from Master: op=Shutter serial=39058 04:13:49 Shutter LASER close 04:13:49 Received message from Camera: op=State serial=39060 04:13:49 GetSingleValue result=40 Value=cccccccc 04:13:49 SkyScan query 04:13:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:13:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:50 Parameters OK 04:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:50 Set A/D data flow result=40 04:13:50 Set A/D channel type result=40 04:13:50 Set A/D encoding result=40 04:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:50 Set channel filter=0.000000e+000 result=40 04:13:50 Config A/D Result=40 04:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:50 Get A/D filter: -9.255963e+061 result=40 04:13:50 Get A/D value=-858993460 result=40 04:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:50 Parameters OK 04:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:50 Set A/D data flow result=40 04:13:50 Set A/D channel type result=40 [UTC 2019-3-1 04:13:50] 04:13:50 Set A/D encoding result=40 04:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:50 Set channel filter=0.000000e+000 result=40 04:13:50 Config A/D Result=40 04:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:50 Get A/D filter: -9.255963e+061 result=40 04:13:50 Get A/D value=-858993460 result=40 04:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:50 Aux= 04:13:50 Message to Camera, serial 39060 queued 04:14:27 Received message from Master: op=PointingHead serial=39073 04:14:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:14:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:14:27 Point started: ret=0 04:14:27 point_skyscan result=0 04:14:28 Check angles 04:14:28 SkyScan query 04:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:14:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:14:29 Message to Master queued w/err=0: serial=39073 error=0 04:14:34 Received message from Master: op=Filter serial=39074 04:14:34 Color wheel filter change from 0 to 0 04:14:34 FLIGetFilterPos err=0 currentPosition=0 04:14:34 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:34 Filter is already there-color wheel unchanged 04:14:34 Received message from Master: op=Shutter serial=39075 04:14:34 Shutter LASER close 04:14:34 Received message from Camera: op=State serial=39077 04:14:34 GetSingleValue result=40 Value=cccccccc 04:14:34 SkyScan query 04:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:14:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:34 Parameters OK 04:14:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:34 Set A/D data flow result=40 04:14:34 Set A/D channel type result=40 04:14:34 Set A/D encoding result=40 04:14:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:34 Set channel filter=0.000000e+000 result=40 04:14:34 Config A/D Result=40 04:14:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:34 Get A/D filter: -9.255963e+061 result=40 04:14:34 Get A/D value=-858993460 result=40 04:14:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:34 Parameters OK 04:14:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:34 Set A/D data flow result=40 04:14:34 Set A/D channel type result=40 04:14:34 Set A/D encoding result=40 04:14:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:34 Set channel filter=0.000000e+000 result=40 04:14:34 Config A/D Result=40 04:14:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:34 Get A/D filter: -9.255963e+061 result=40 04:14:34 Get A/D value=-858993460 result=40 04:14:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:34 Aux= 04:14:34 Message to Camera, serial 39077 queued 04:15:11 Received message from Master: op=PointingHead serial=39090 04:15:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:15:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:15:12 Point started: ret=0 04:15:12 point_skyscan result=0 04:15:12 Check angles 04:15:12 SkyScan query 04:15:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:15:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:15:13 Message to Master queued w/err=0: serial=39090 error=0 04:15:18 Received message from Master: op=Filter serial=39091 04:15:18 Color wheel filter change from 0 to 0 04:15:18 FLIGetFilterPos err=0 currentPosition=0 04:15:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:18 Filter is already there-color wheel unchanged 04:15:18 Received message from Master: op=Shutter serial=39092 04:15:18 Shutter LASER close 04:15:18 Received message from Camera: op=State serial=39094 04:15:18 GetSingleValue result=40 Value=cccccccc 04:15:18 SkyScan query 04:15:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:15:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:19 Parameters OK 04:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:19 Set A/D data flow result=40 04:15:19 Set A/D channel type result=40 04:15:19 Set A/D encoding result=40 04:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:19 Set channel filter=0.000000e+000 result=40 04:15:19 Config A/D Result=40 04:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:19 Get A/D filter: -9.255963e+061 result=40 04:15:19 Get A/D value=-858993460 result=40 04:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:19 Parameters OK 04:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:19 Set A/D data flow result=40 04:15:19 Set A/D channel type result=40 04:15:19 Set A/D encoding result=40 04:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:19 Set channel filter=0.000000e+000 result=40 04:15:19 Config A/D Result=40 04:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:19 Get A/D filter: -9.255963e+061 result=40 04:15:19 Get A/D value=-858993460 result=40 04:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:19 Aux= 04:15:19 Message to Camera, serial 39094 queued 04:15:56 Received message from Master: op=PointingHead serial=39107 04:15:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:15:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:15:56 Point started: ret=0 04:15:56 point_skyscan result=0 04:15:57 Check angles 04:15:57 SkyScan query 04:15:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.865<-13591 Statuses=0008 0009 04:15:57 Msec=0 True Az=112.995 Ze=-23.865 Az status=0008 Ze status=0009 04:15:57 Check angles 04:15:57 SkyScan query 04:15:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.24<-15016 Statuses=0008 0009 04:15:58 Msec=750 True Az=112.995 Ze=-45.24 Az status=0008 Ze status=0009 04:15:58 Check angles 04:15:58 SkyScan query 04:15:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.195<-16413 Statuses=0008 0009 04:15:59 Msec=1500 True Az=112.995 Ze=-66.195 Az status=0008 Ze status=0009 04:15:59 Check angles 04:15:59 SkyScan query 04:15:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.165<-17811 Statuses=0008 0009 04:15:59 Msec=2250 True Az=112.995 Ze=-87.165 Az status=0008 Ze status=0009 04:16:00 Check angles 04:16:00 SkyScan query 04:16:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.525<-19235 Statuses=0008 0009 04:16:00 Msec=3000 True Az=112.995 Ze=-108.525 Az status=0008 Ze status=0009 04:16:00 Check angles 04:16:00 SkyScan query 04:16:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.93<-20662 Statuses=0008 0009 04:16:01 Msec=3750 True Az=112.995 Ze=-129.93 Az status=0008 Ze status=0009 04:16:01 Check angles 04:16:01 SkyScan query 04:16:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.855<-22057 Statuses=0008 0009 04:16:02 Msec=4500 True Az=112.995 Ze=-150.855 Az status=0008 Ze status=0009 04:16:02 Check angles 04:16:02 SkyScan query 04:16:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.81<-23454 Statuses=0008 0009 04:16:03 Msec=5250 True Az=112.995 Ze=-171.81 Az status=0008 Ze status=0009 04:16:03 Check angles 04:16:03 SkyScan query 04:16:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:16:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:16:03 Message to Master queued w/err=0: serial=39107 error=0 04:16:08 Received message from Master: op=Filter serial=39108 04:16:08 Color wheel filter change from 0 to 0 04:16:08 FLIGetFilterPos err=0 currentPosition=0 04:16:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:08 Filter is already there-color wheel unchanged 04:16:08 Received message from Master: op=Shutter serial=39109 04:16:08 Shutter LASER open 04:16:09 Received message from Camera: op=State serial=39111 04:16:09 GetSingleValue result=40 Value=cccccccc 04:16:09 SkyScan query 04:16:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:16:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:09 Parameters OK 04:16:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:09 Set A/D data flow result=40 04:16:09 Set A/D channel type result=40 04:16:09 Set A/D encoding result=40 04:16:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:09 Set channel filter=0.000000e+000 result=40 04:16:09 Config A/D Result=40 04:16:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:09 Get A/D filter: -9.255963e+061 result=40 04:16:09 Get A/D value=-858993460 result=40 04:16:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:09 Parameters OK 04:16:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:09 Set A/D data flow result=40 04:16:09 Set A/D channel type result=40 04:16:09 Set A/D encoding result=40 04:16:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:09 Set channel filter=0.000000e+000 result=40 04:16:09 Config A/D Result=40 04:16:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:09 Get A/D filter: -9.255963e+061 result=40 04:16:09 Get A/D value=-858993460 result=40 04:16:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:09 Aux= 04:16:09 Message to Camera, serial 39111 queued 04:16:18 Received message from Master: op=Shutter serial=39121 04:16:18 Shutter LASER close 04:16:18 Received message from Master: op=PointingHead serial=39125 04:16:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:16:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:16:19 Point started: ret=0 04:16:19 point_skyscan result=0 04:16:19 Check angles 04:16:19 SkyScan query 04:16:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 04:16:20 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 04:16:20 Check angles 04:16:20 SkyScan query 04:16:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 04:16:21 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 04:16:21 Check angles 04:16:21 SkyScan query 04:16:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.37<-18758 Statuses=0008 0009 04:16:21 Msec=1500 True Az=112.995 Ze=-101.37 Az status=0008 Ze status=0009 04:16:22 Check angles 04:16:22 SkyScan query 04:16:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.415<-17361 Statuses=0008 0009 04:16:22 Msec=2250 True Az=112.995 Ze=-80.415 Az status=0008 Ze status=0009 04:16:22 Check angles 04:16:22 SkyScan query 04:16:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 04:16:23 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 04:16:23 Check angles 04:16:23 SkyScan query 04:16:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.055<-14537 Statuses=0008 0009 04:16:24 Msec=3750 True Az=112.995 Ze=-38.055 Az status=0008 Ze status=0009 04:16:24 Check angles 04:16:24 SkyScan query 04:16:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.115<-13141 Statuses=0008 0009 04:16:24 Msec=4500 True Az=112.995 Ze=-17.115 Az status=0008 Ze status=0009 04:16:25 Check angles 04:16:25 SkyScan query 04:16:25 SkyScan query done: ret=0 az=112.995<-7533 ze=4.245<-11717 Statuses=0008 0009 04:16:25 Msec=5250 True Az=112.995 Ze=4.245 Az status=0008 Ze status=0009 04:16:25 Check angles 04:16:25 SkyScan query 04:16:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:16:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:16:26 Message to Master queued w/err=0: serial=39125 error=0 04:16:31 Received message from Master: op=Filter serial=39126 04:16:31 Color wheel filter change from 0 to 0 04:16:31 FLIGetFilterPos err=0 currentPosition=0 04:16:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:31 Filter is already there-color wheel unchanged 04:16:31 Received message from Master: op=Shutter serial=39127 04:16:31 Shutter LASER close 04:16:31 Received message from Camera: op=State serial=39129 04:16:31 GetSingleValue result=40 Value=cccccccc 04:16:31 SkyScan query 04:16:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:16:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:32 Parameters OK 04:16:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:32 Set A/D data flow result=40 04:16:32 Set A/D channel type result=40 04:16:32 Set A/D encoding result=40 04:16:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:32 Set channel filter=0.000000e+000 result=40 04:16:32 Config A/D Result=40 04:16:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:32 Get A/D filter: -9.255963e+061 result=40 04:16:32 Get A/D value=-858993460 result=40 04:16:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:32 Parameters OK 04:16:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:32 Set A/D data flow result=40 04:16:32 Set A/D channel type result=40 04:16:32 Set A/D encoding result=40 04:16:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:32 Set channel filter=0.000000e+000 result=40 04:16:32 Config A/D Result=40 04:16:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:32 Get A/D filter: -9.255963e+061 result=40 04:16:32 Get A/D value=-858993460 result=40 04:16:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:32 Aux= 04:16:32 Message to Camera, serial 39129 queued 04:17:09 Received message from Master: op=PointingHead serial=39142 04:17:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:17:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:17:09 Point started: ret=0 04:17:09 point_skyscan result=0 04:17:10 Check angles 04:17:10 SkyScan query 04:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:17:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:17:10 Message to Master queued w/err=0: serial=39142 error=0 04:17:15 Received message from Master: op=Filter serial=39143 04:17:15 Color wheel filter change from 0 to 0 04:17:15 FLIGetFilterPos err=0 currentPosition=0 04:17:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:15 Filter is already there-color wheel unchanged 04:17:16 Received message from Master: op=Shutter serial=39144 04:17:16 Shutter LASER close 04:17:16 Received message from Camera: op=State serial=39146 04:17:16 GetSingleValue result=40 Value=cccccccc 04:17:16 SkyScan query 04:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:17:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:16 Parameters OK 04:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:16 Set A/D data flow result=40 04:17:16 Set A/D channel type result=40 04:17:16 Set A/D encoding result=40 04:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:16 Set channel filter=0.000000e+000 result=40 04:17:16 Config A/D Result=40 04:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:16 Get A/D filter: -9.255963e+061 result=40 04:17:16 Get A/D value=-858993460 result=40 04:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:16 Parameters OK 04:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:16 Set A/D data flow result=40 04:17:16 Set A/D channel type result=40 04:17:16 Set A/D encoding result=40 04:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:16 Set channel filter=0.000000e+000 result=40 04:17:16 Config A/D Result=40 04:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:16 Get A/D filter: -9.255963e+061 result=40 04:17:16 Get A/D value=-858993460 result=40 04:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:16 Aux= 04:17:16 Message to Camera, serial 39146 queued 04:17:53 Received message from Master: op=PointingHead serial=39159 04:17:53 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:17:53 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:17:53 Point started: ret=0 04:17:53 point_skyscan result=0 04:17:54 Check angles 04:17:54 SkyScan query 04:17:55 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.495<-12433 Statuses=0009 0008 04:17:55 Msec=0 True Az=136.11 Ze=-6.495 Az status=0009 Ze status=0008 04:17:55 Check angles 04:17:55 SkyScan query 04:17:55 SkyScan query done: ret=0 az=154.065<-10271 ze=-6.48<-12432 Statuses=0009 0008 04:17:55 Msec=750 True Az=154.065 Ze=-6.48 Az status=0009 Ze status=0008 04:17:56 Check angles 04:17:56 SkyScan query 04:17:56 SkyScan query done: ret=0 az=171.495<-11433 ze=-6.48<-12432 Statuses=0009 0008 04:17:56 Msec=1500 True Az=171.495 Ze=-6.48 Az status=0009 Ze status=0008 04:17:56 Check angles 04:17:56 SkyScan query 04:17:57 SkyScan query done: ret=0 az=175.98<-11732 ze=-6.48<-12432 Statuses=0008 0008 04:17:57 Msec=2250 True Az=175.98 Ze=-6.48 Az status=0008 Ze status=0008 04:17:57 Message to Master queued w/err=0: serial=39159 error=0 04:18:02 Received message from Master: op=Filter serial=39160 04:18:02 Color wheel filter change from 0 to 0 04:18:02 FLIGetFilterPos err=0 currentPosition=0 04:18:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:02 Filter is already there-color wheel unchanged 04:18:02 Received message from Master: op=Shutter serial=39161 04:18:02 Shutter LASER close 04:18:02 Received message from Camera: op=State serial=39163 04:18:02 GetSingleValue result=40 Value=cccccccc 04:18:02 SkyScan query 04:18:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:18:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:03 Parameters OK 04:18:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:03 Set A/D data flow result=40 04:18:03 Set A/D channel type result=40 04:18:03 Set A/D encoding result=40 04:18:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:03 Set channel filter=0.000000e+000 result=40 04:18:03 Config A/D Result=40 04:18:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:03 Get A/D filter: -9.255963e+061 result=40 04:18:03 Get A/D value=-858993460 result=40 04:18:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:03 Parameters OK 04:18:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:03 Set A/D data flow result=40 04:18:03 Set A/D channel type result=40 04:18:03 Set A/D encoding result=40 04:18:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:03 Set channel filter=0.000000e+000 result=40 04:18:03 Config A/D Result=40 04:18:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:03 Get A/D filter: -9.255963e+061 result=40 04:18:03 Get A/D value=-858993460 result=40 04:18:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:03 Aux= 04:18:03 Message to Camera, serial 39163 queued 04:18:40 Received message from Master: op=PointingHead serial=39176 04:18:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:18:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:18:40 Point started: ret=0 04:18:40 point_skyscan result=0 04:18:41 Check angles 04:18:41 SkyScan query 04:18:41 SkyScan query done: ret=0 az=153.165<-10211 ze=6.51<-11566 Statuses=0009 0008 04:18:41 Msec=0 True Az=153.165 Ze=6.51 Az status=0009 Ze status=0008 04:18:41 Check angles 04:18:41 SkyScan query 04:18:42 SkyScan query done: ret=0 az=135.36<-9024 ze=6.495<-11567 Statuses=0009 0008 04:18:42 Msec=750 True Az=135.36 Ze=6.495 Az status=0009 Ze status=0008 04:18:42 Check angles 04:18:42 SkyScan query 04:18:43 SkyScan query done: ret=0 az=117.84<-7856 ze=6.495<-11567 Statuses=0009 0008 04:18:43 Msec=1500 True Az=117.84 Ze=6.495 Az status=0009 Ze status=0008 04:18:43 Check angles 04:18:43 SkyScan query 04:18:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:18:44 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:18:44 Message to Master queued w/err=0: serial=39176 error=0 04:18:49 Received message from Master: op=Filter serial=39177 04:18:49 Color wheel filter change from 0 to 0 04:18:49 FLIGetFilterPos err=0 currentPosition=0 04:18:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:49 Filter is already there-color wheel unchanged 04:18:49 Received message from Master: op=Shutter serial=39178 04:18:49 Shutter LASER close 04:18:49 Received message from Camera: op=State serial=39180 04:18:49 GetSingleValue result=40 Value=cccccccc 04:18:49 SkyScan query 04:18:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:18:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:49 Parameters OK 04:18:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:49 Set A/D data flow result=40 04:18:49 Set A/D channel type result=40 04:18:49 Set A/D encoding result=40 04:18:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:49 Set channel filter=0.000000e+000 result=40 04:18:49 Config A/D Result=40 04:18:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:49 Get A/D filter: -9.255963e+061 result=40 04:18:49 Get A/D value=-858993460 result=40 04:18:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:49 Parameters OK 04:18:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:49 Set A/D data flow result=40 04:18:49 Set A/D channel type result=40 04:18:49 Set A/D encoding result=40 04:18:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:49 Set channel filter=0.000000e+000 result=40 04:18:49 Config A/D Result=40 04:18:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:49 Get A/D filter: -9.255963e+061 result=40 04:18:49 Get A/D value=-858993460 result=40 04:18:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:49 Aux= 04:18:49 Message to Camera, serial 39180 queued 04:19:26 Received message from Master: op=PointingHead serial=39193 04:19:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:19:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:19:27 Point started: ret=0 04:19:27 point_skyscan result=0 04:19:27 Check angles 04:19:27 SkyScan query 04:19:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 04:19:28 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 04:19:28 Check angles 04:19:28 SkyScan query 04:19:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.775<-14985 Statuses=0008 0009 04:19:29 Msec=750 True Az=112.995 Ze=-44.775 Az status=0008 Ze status=0009 04:19:29 Check angles 04:19:29 SkyScan query 04:19:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 04:19:29 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 04:19:30 Check angles 04:19:30 SkyScan query 04:19:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 04:19:30 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 04:19:30 Check angles 04:19:30 SkyScan query 04:19:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 04:19:31 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 04:19:31 Check angles 04:19:31 SkyScan query 04:19:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-129<-20600 Statuses=0008 0009 04:19:32 Msec=3750 True Az=112.995 Ze=-129 Az status=0008 Ze status=0009 04:19:32 Check angles 04:19:32 SkyScan query 04:19:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.955<-21997 Statuses=0008 0009 04:19:32 Msec=4500 True Az=112.995 Ze=-149.955 Az status=0008 Ze status=0009 04:19:33 Check angles 04:19:33 SkyScan query 04:19:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.835<-23389 Statuses=0008 0009 04:19:33 Msec=5250 True Az=112.995 Ze=-170.835 Az status=0008 Ze status=0009 04:19:33 Check angles 04:19:33 SkyScan query 04:19:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:19:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:19:34 Message to Master queued w/err=0: serial=39193 error=0 04:19:39 Received message from Master: op=Filter serial=39194 04:19:39 Color wheel filter change from 0 to 0 04:19:39 FLIGetFilterPos err=0 currentPosition=0 04:19:39 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:39 Filter is already there-color wheel unchanged 04:19:39 Received message from Master: op=Shutter serial=39195 04:19:39 Shutter LASER open 04:19:39 Received message from Camera: op=State serial=39197 04:19:39 GetSingleValue result=40 Value=cccccccc 04:19:39 SkyScan query 04:19:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:19:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:40 Parameters OK 04:19:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:40 Set A/D data flow result=40 04:19:40 Set A/D channel type result=40 04:19:40 Set A/D encoding result=40 04:19:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:40 Set channel filter=0.000000e+000 result=40 04:19:40 Config A/D Result=40 04:19:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:40 Get A/D filter: -9.255963e+061 result=40 04:19:40 Get A/D value=-858993460 result=40 04:19:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:40 Parameters OK 04:19:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:40 Set A/D data flow result=40 04:19:40 Set A/D channel type result=40 04:19:40 Set A/D encoding result=40 04:19:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:40 Set channel filter=0.000000e+000 result=40 04:19:40 Config A/D Result=40 04:19:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:40 Get A/D filter: -9.255963e+061 result=40 04:19:40 Get A/D value=-858993460 result=40 04:19:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:40 Aux= 04:19:40 Message to Camera, serial 39197 queued 04:19:48 Received message from Master: op=Shutter serial=39207 04:19:48 Shutter LASER close 04:19:49 Received message from Master: op=PointingHead serial=39211 04:19:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:19:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:19:49 Point started: ret=0 04:19:49 point_skyscan result=0 04:19:50 Check angles 04:19:50 SkyScan query 04:19:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 04:19:50 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 04:19:51 Check angles 04:19:51 SkyScan query 04:19:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 04:19:51 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 04:19:51 Check angles 04:19:51 SkyScan query 04:19:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.395<-18693 Statuses=0008 0009 04:19:52 Msec=1500 True Az=112.995 Ze=-100.395 Az status=0008 Ze status=0009 04:19:52 Check angles 04:19:52 SkyScan query 04:19:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 04:19:53 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 04:19:53 Check angles 04:19:53 SkyScan query 04:19:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 04:19:53 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 04:19:54 Check angles 04:19:54 SkyScan query 04:19:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 04:19:54 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 04:19:54 Check angles 04:19:54 SkyScan query 04:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.575<-13105 Statuses=0008 0009 04:19:55 Msec=4500 True Az=112.995 Ze=-16.575 Az status=0008 Ze status=0009 04:19:55 Check angles 04:19:55 SkyScan query 04:19:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.32<-11712 Statuses=0008 0009 04:19:56 Msec=5250 True Az=112.995 Ze=4.32 Az status=0008 Ze status=0009 04:19:56 Check angles 04:19:56 SkyScan query 04:19:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:19:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:19:56 Message to Master queued w/err=0: serial=39211 error=0 04:20:01 Received message from Master: op=Filter serial=39212 04:20:01 Color wheel filter change from 0 to 0 04:20:01 FLIGetFilterPos err=0 currentPosition=0 04:20:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:01 Filter is already there-color wheel unchanged 04:20:02 Received message from Master: op=Shutter serial=39213 04:20:02 Shutter LASER close 04:20:02 Received message from Camera: op=State serial=39215 04:20:02 GetSingleValue result=40 Value=cccccccc 04:20:02 SkyScan query 04:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:20:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:02 Parameters OK 04:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:02 Set A/D data flow result=40 04:20:02 Set A/D channel type result=40 04:20:02 Set A/D encoding result=40 04:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:02 Set channel filter=0.000000e+000 result=40 04:20:02 Config A/D Result=40 04:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:02 Get A/D filter: -9.255963e+061 result=40 04:20:02 Get A/D value=-858993460 result=40 04:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:02 Parameters OK 04:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:02 Set A/D data flow result=40 04:20:02 Set A/D channel type result=40 04:20:02 Set A/D encoding result=40 04:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:02 Set channel filter=0.000000e+000 result=40 04:20:02 Config A/D Result=40 04:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:02 Get A/D filter: -9.255963e+061 result=40 04:20:02 Get A/D value=-858993460 result=40 04:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:02 Aux= 04:20:02 Message to Camera, serial 39215 queued 04:20:39 Received message from Master: op=PointingHead serial=39228 04:20:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:20:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:20:39 Point started: ret=0 04:20:39 point_skyscan result=0 04:20:40 Check angles 04:20:40 SkyScan query 04:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:20:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:20:41 Message to Master queued w/err=0: serial=39228 error=0 04:20:46 Received message from Master: op=Filter serial=39229 04:20:46 Color wheel filter change from 0 to 0 04:20:46 FLIGetFilterPos err=0 currentPosition=0 04:20:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:46 Filter is already there-color wheel unchanged 04:20:46 Received message from Master: op=Shutter serial=39230 04:20:46 Shutter LASER close 04:20:46 Received message from Camera: op=State serial=39232 04:20:46 GetSingleValue result=40 Value=cccccccc 04:20:46 SkyScan query 04:20:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:20:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:47 Parameters OK 04:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:47 Set A/D data flow result=40 04:20:47 Set A/D channel type result=40 04:20:47 Set A/D encoding result=40 04:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:47 Set channel filter=0.000000e+000 result=40 04:20:47 Config A/D Result=40 04:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:47 Get A/D filter: -9.255963e+061 result=40 04:20:47 Get A/D value=-858993460 result=40 04:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:47 Parameters OK 04:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:47 Set A/D data flow result=40 04:20:47 Set A/D channel type result=40 04:20:47 Set A/D encoding result=40 04:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:47 Set channel filter=0.000000e+000 result=40 04:20:47 Config A/D Result=40 04:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:47 Get A/D filter: -9.255963e+061 result=40 04:20:47 Get A/D value=-858993460 result=40 04:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:47 Aux= 04:20:47 Message to Camera, serial 39232 queued 04:21:23 Received message from Master: op=PointingHead serial=39245 04:21:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:21:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:21:24 Point started: ret=0 04:21:24 point_skyscan result=0 04:21:25 Check angles 04:21:25 SkyScan query 04:21:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:21:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:21:25 Message to Master queued w/err=0: serial=39245 error=0 04:21:30 Received message from Master: op=Filter serial=39246 04:21:30 Color wheel filter change from 0 to 0 04:21:30 FLIGetFilterPos err=0 currentPosition=0 04:21:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:30 Filter is already there-color wheel unchanged 04:21:30 Received message from Master: op=Shutter serial=39247 04:21:30 Shutter LASER close 04:21:30 Received message from Camera: op=State serial=39249 04:21:30 GetSingleValue result=40 Value=cccccccc 04:21:30 SkyScan query 04:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:21:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:31 Parameters OK 04:21:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:31 Set A/D data flow result=40 04:21:31 Set A/D channel type result=40 04:21:31 Set A/D encoding result=40 04:21:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:31 Set channel filter=0.000000e+000 result=40 04:21:31 Config A/D Result=40 04:21:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:31 Get A/D filter: -9.255963e+061 result=40 04:21:31 Get A/D value=-858993460 result=40 04:21:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:31 Parameters OK 04:21:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:31 Set A/D data flow result=40 04:21:31 Set A/D channel type result=40 04:21:31 Set A/D encoding result=40 04:21:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:31 Set channel filter=0.000000e+000 result=40 04:21:31 Config A/D Result=40 04:21:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:31 Get A/D filter: -9.255963e+061 result=40 04:21:31 Get A/D value=-858993460 result=40 04:21:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:31 Aux= 04:21:31 Message to Camera, serial 39249 queued 04:22:08 Received message from Master: op=PointingHead serial=39262 04:22:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:22:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:22:08 Point started: ret=0 04:22:08 point_skyscan result=0 04:22:09 Check angles 04:22:09 SkyScan query 04:22:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:22:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:22:09 Message to Master queued w/err=0: serial=39262 error=0 04:22:14 Received message from Master: op=Filter serial=39263 04:22:14 Color wheel filter change from 0 to 0 04:22:14 FLIGetFilterPos err=0 currentPosition=0 04:22:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:14 Filter is already there-color wheel unchanged 04:22:15 Received message from Master: op=Shutter serial=39264 04:22:15 Shutter LASER close 04:22:15 Received message from Camera: op=State serial=39266 04:22:15 GetSingleValue result=40 Value=cccccccc 04:22:15 SkyScan query 04:22:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:22:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:15 Parameters OK 04:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:15 Set A/D data flow result=40 04:22:15 Set A/D channel type result=40 04:22:15 Set A/D encoding result=40 04:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:15 Set channel filter=0.000000e+000 result=40 04:22:15 Config A/D Result=40 04:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:15 Get A/D filter: -9.255963e+061 result=40 04:22:15 Get A/D value=-858993460 result=40 04:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:15 Parameters OK 04:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:15 Set A/D data flow result=40 04:22:15 Set A/D channel type result=40 04:22:15 Set A/D encoding result=40 04:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:15 Set channel filter=0.000000e+000 result=40 04:22:15 Config A/D Result=40 04:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:15 Get A/D filter: -9.255963e+061 result=40 04:22:15 Get A/D value=-858993460 result=40 04:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:15 Aux= 04:22:15 Message to Camera, serial 39266 queued 04:22:52 Received message from Master: op=PointingHead serial=39279 04:22:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:22:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:22:52 Point started: ret=0 04:22:52 point_skyscan result=0 04:22:53 Check angles 04:22:53 SkyScan query 04:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 04:22:54 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 04:22:54 Check angles 04:22:54 SkyScan query 04:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.115<-14941 Statuses=0008 0009 04:22:54 Msec=750 True Az=112.995 Ze=-44.115 Az status=0008 Ze status=0009 04:22:55 Check angles 04:22:55 SkyScan query 04:22:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.07<-16338 Statuses=0008 0009 04:22:55 Msec=1500 True Az=112.995 Ze=-65.07 Az status=0008 Ze status=0009 04:22:55 Check angles 04:22:55 SkyScan query 04:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.025<-17735 Statuses=0008 0009 04:22:56 Msec=2250 True Az=112.995 Ze=-86.025 Az status=0008 Ze status=0009 04:22:56 Check angles 04:22:56 SkyScan query 04:22:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.965<-19131 Statuses=0008 0009 04:22:57 Msec=3000 True Az=112.995 Ze=-106.965 Az status=0008 Ze status=0009 04:22:57 Check angles 04:22:57 SkyScan query 04:22:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.935<-20529 Statuses=0008 0009 04:22:57 Msec=3750 True Az=112.995 Ze=-127.935 Az status=0008 Ze status=0009 04:22:58 Check angles 04:22:58 SkyScan query 04:22:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.875<-21925 Statuses=0008 0009 04:22:58 Msec=4500 True Az=112.995 Ze=-148.875 Az status=0008 Ze status=0009 04:22:58 Check angles 04:22:58 SkyScan query 04:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.845<-23323 Statuses=0008 0009 04:22:59 Msec=5250 True Az=112.995 Ze=-169.845 Az status=0008 Ze status=0009 04:22:59 Check angles 04:22:59 SkyScan query 04:23:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:23:00 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:23:00 Message to Master queued w/err=0: serial=39279 error=0 04:23:05 Received message from Master: op=Filter serial=39280 04:23:05 Color wheel filter change from 0 to 0 04:23:05 FLIGetFilterPos err=0 currentPosition=0 04:23:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:05 Filter is already there-color wheel unchanged 04:23:05 Received message from Master: op=Shutter serial=39281 04:23:05 Shutter LASER open 04:23:05 Received message from Camera: op=State serial=39283 04:23:05 GetSingleValue result=40 Value=cccccccc 04:23:05 SkyScan query 04:23:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:23:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:06 Parameters OK 04:23:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:06 Set A/D data flow result=40 04:23:06 Set A/D channel type result=40 04:23:06 Set A/D encoding result=40 04:23:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:06 Set channel filter=0.000000e+000 result=40 04:23:06 Config A/D Result=40 04:23:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:06 Get A/D filter: -9.255963e+061 result=40 04:23:06 Get A/D value=-858993460 result=40 04:23:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:06 Parameters OK 04:23:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:06 Set A/D data flow result=40 04:23:06 Set A/D channel type result=40 04:23:06 Set A/D encoding result=40 04:23:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:06 Set channel filter=0.000000e+000 result=40 04:23:06 Config A/D Result=40 04:23:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:06 Get A/D filter: -9.255963e+061 result=40 04:23:06 Get A/D value=-858993460 result=40 04:23:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:06 Aux= 04:23:06 Message to Camera, serial 39283 queued 04:23:14 Received message from Master: op=Shutter serial=39293 04:23:14 Shutter LASER close 04:23:15 Received message from Master: op=PointingHead serial=39297 04:23:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:23:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:23:15 Point started: ret=0 04:23:15 point_skyscan result=0 04:23:16 Check angles 04:23:16 SkyScan query 04:23:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 04:23:16 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 04:23:17 Check angles 04:23:17 SkyScan query 04:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.95<-20130 Statuses=0008 0009 04:23:17 Msec=750 True Az=112.995 Ze=-121.95 Az status=0008 Ze status=0009 04:23:17 Check angles 04:23:17 SkyScan query 04:23:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.575<-18705 Statuses=0008 0009 04:23:18 Msec=1500 True Az=112.995 Ze=-100.575 Az status=0008 Ze status=0009 04:23:18 Check angles 04:23:18 SkyScan query 04:23:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.62<-17308 Statuses=0008 0009 04:23:19 Msec=2250 True Az=112.995 Ze=-79.62 Az status=0008 Ze status=0009 04:23:19 Check angles 04:23:19 SkyScan query 04:23:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.68<-15912 Statuses=0008 0009 04:23:19 Msec=3000 True Az=112.995 Ze=-58.68 Az status=0008 Ze status=0009 04:23:20 Check angles 04:23:20 SkyScan query 04:23:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 04:23:20 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 04:23:20 Check angles 04:23:20 SkyScan query 04:23:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.755<-13117 Statuses=0008 0009 04:23:21 Msec=4500 True Az=112.995 Ze=-16.755 Az status=0008 Ze status=0009 04:23:21 Check angles 04:23:21 SkyScan query 04:23:22 SkyScan query done: ret=0 az=112.995<-7533 ze=4.17<-11722 Statuses=0008 0009 04:23:22 Msec=5250 True Az=112.995 Ze=4.17 Az status=0008 Ze status=0009 04:23:22 Check angles 04:23:22 SkyScan query 04:23:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:23:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:23:22 Message to Master queued w/err=0: serial=39297 error=0 04:23:27 Received message from Master: op=Filter serial=39298 04:23:27 Color wheel filter change from 0 to 0 04:23:27 FLIGetFilterPos err=0 currentPosition=0 04:23:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:27 Filter is already there-color wheel unchanged 04:23:28 Received message from Master: op=Shutter serial=39299 04:23:28 Shutter LASER close 04:23:28 Received message from Camera: op=State serial=39301 04:23:28 GetSingleValue result=40 Value=cccccccc 04:23:28 SkyScan query 04:23:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:23:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:28 Parameters OK 04:23:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:28 Set A/D data flow result=40 04:23:28 Set A/D channel type result=40 04:23:28 Set A/D encoding result=40 04:23:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:28 Set channel filter=0.000000e+000 result=40 04:23:28 Config A/D Result=40 04:23:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:28 Get A/D filter: -9.255963e+061 result=40 04:23:28 Get A/D value=-858993460 result=40 04:23:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:28 Parameters OK 04:23:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:28 Set A/D data flow result=40 04:23:28 Set A/D channel type result=40 04:23:28 Set A/D encoding result=40 04:23:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:28 Set channel filter=0.000000e+000 result=40 04:23:28 Config A/D Result=40 04:23:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:28 Get A/D filter: -9.255963e+061 result=40 04:23:28 Get A/D value=-858993460 result=40 04:23:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:28 Aux= 04:23:28 Message to Camera, serial 39301 queued [UTC 2019-3-1 04:23:50] 04:24:05 Received message from Master: op=PointingHead serial=39314 04:24:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:24:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:24:05 Point started: ret=0 04:24:05 point_skyscan result=0 04:24:06 Check angles 04:24:06 SkyScan query 04:24:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:24:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:24:07 Message to Master queued w/err=0: serial=39314 error=0 04:24:12 Received message from Master: op=Filter serial=39315 04:24:12 Color wheel filter change from 0 to 0 04:24:12 FLIGetFilterPos err=0 currentPosition=0 04:24:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:12 Filter is already there-color wheel unchanged 04:24:12 Received message from Master: op=Shutter serial=39316 04:24:12 Shutter LASER close 04:24:12 Received message from Camera: op=State serial=39318 04:24:12 GetSingleValue result=40 Value=cccccccc 04:24:12 SkyScan query 04:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:24:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:13 Parameters OK 04:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:13 Set A/D data flow result=40 04:24:13 Set A/D channel type result=40 04:24:13 Set A/D encoding result=40 04:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:13 Set channel filter=0.000000e+000 result=40 04:24:13 Config A/D Result=40 04:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:13 Get A/D filter: -9.255963e+061 result=40 04:24:13 Get A/D value=-858993460 result=40 04:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:13 Parameters OK 04:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:13 Set A/D data flow result=40 04:24:13 Set A/D channel type result=40 04:24:13 Set A/D encoding result=40 04:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:13 Set channel filter=0.000000e+000 result=40 04:24:13 Config A/D Result=40 04:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:13 Get A/D filter: -9.255963e+061 result=40 04:24:13 Get A/D value=-858993460 result=40 04:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:13 Aux= 04:24:13 Message to Camera, serial 39318 queued 04:24:49 Received message from Master: op=PointingHead serial=39331 04:24:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:24:49 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:24:50 Point started: ret=0 04:24:50 point_skyscan result=0 04:24:51 Check angles 04:24:51 SkyScan query 04:24:51 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.495<-12433 Statuses=0009 0008 04:24:51 Msec=0 True Az=135.915 Ze=-6.495 Az status=0009 Ze status=0008 04:24:51 Check angles 04:24:51 SkyScan query 04:24:52 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.48<-12432 Statuses=0009 0008 04:24:52 Msec=750 True Az=153.78 Ze=-6.48 Az status=0009 Ze status=0008 04:24:52 Check angles 04:24:52 SkyScan query 04:24:53 SkyScan query done: ret=0 az=171.6<-11440 ze=-6.48<-12432 Statuses=0009 0008 04:24:53 Msec=1500 True Az=171.6 Ze=-6.48 Az status=0009 Ze status=0008 04:24:53 Check angles 04:24:53 SkyScan query 04:24:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:24:53 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 04:24:53 Message to Master queued w/err=0: serial=39331 error=0 04:24:58 Received message from Master: op=Filter serial=39332 04:24:58 Color wheel filter change from 0 to 0 04:24:58 FLIGetFilterPos err=0 currentPosition=0 04:24:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:58 Filter is already there-color wheel unchanged 04:24:59 Received message from Master: op=Shutter serial=39333 04:24:59 Shutter LASER close 04:24:59 Received message from Camera: op=State serial=39335 04:24:59 GetSingleValue result=40 Value=cccccccc 04:24:59 SkyScan query 04:24:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:24:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:59 Parameters OK 04:24:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:59 Set A/D data flow result=40 04:24:59 Set A/D channel type result=40 04:24:59 Set A/D encoding result=40 04:24:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:59 Set channel filter=0.000000e+000 result=40 04:24:59 Config A/D Result=40 04:24:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:59 Get A/D filter: -9.255963e+061 result=40 04:24:59 Get A/D value=-858993460 result=40 04:24:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:59 Parameters OK 04:24:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:59 Set A/D data flow result=40 04:24:59 Set A/D channel type result=40 04:24:59 Set A/D encoding result=40 04:24:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:59 Set channel filter=0.000000e+000 result=40 04:24:59 Config A/D Result=40 04:24:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:59 Get A/D filter: -9.255963e+061 result=40 04:24:59 Get A/D value=-858993460 result=40 04:24:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:59 Aux= 04:24:59 Message to Camera, serial 39335 queued 04:25:36 Received message from Master: op=PointingHead serial=39348 04:25:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:25:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:25:36 Point started: ret=0 04:25:36 point_skyscan result=0 04:25:37 Check angles 04:25:37 SkyScan query 04:25:38 SkyScan query done: ret=0 az=153.12<-10208 ze=6.51<-11566 Statuses=0009 0008 04:25:38 Msec=0 True Az=153.12 Ze=6.51 Az status=0009 Ze status=0008 04:25:38 Check angles 04:25:38 SkyScan query 04:25:38 SkyScan query done: ret=0 az=135.675<-9045 ze=6.495<-11567 Statuses=0009 0008 04:25:38 Msec=750 True Az=135.675 Ze=6.495 Az status=0009 Ze status=0008 04:25:39 Check angles 04:25:39 SkyScan query 04:25:39 SkyScan query done: ret=0 az=118.14<-7876 ze=6.495<-11567 Statuses=0009 0008 04:25:39 Msec=1500 True Az=118.14 Ze=6.495 Az status=0009 Ze status=0008 04:25:39 Check angles 04:25:39 SkyScan query 04:25:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:25:40 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:25:40 Message to Master queued w/err=0: serial=39348 error=0 04:25:45 Received message from Master: op=Filter serial=39349 04:25:45 Color wheel filter change from 0 to 0 04:25:45 FLIGetFilterPos err=0 currentPosition=0 04:25:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:45 Filter is already there-color wheel unchanged 04:25:45 Received message from Master: op=Shutter serial=39350 04:25:45 Shutter LASER close 04:25:45 Received message from Camera: op=State serial=39352 04:25:45 GetSingleValue result=40 Value=cccccccc 04:25:45 SkyScan query 04:25:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:25:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:46 Parameters OK 04:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:46 Set A/D data flow result=40 04:25:46 Set A/D channel type result=40 04:25:46 Set A/D encoding result=40 04:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:46 Set channel filter=0.000000e+000 result=40 04:25:46 Config A/D Result=40 04:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:46 Get A/D filter: -9.255963e+061 result=40 04:25:46 Get A/D value=-858993460 result=40 04:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:46 Parameters OK 04:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:46 Set A/D data flow result=40 04:25:46 Set A/D channel type result=40 04:25:46 Set A/D encoding result=40 04:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:46 Set channel filter=0.000000e+000 result=40 04:25:46 Config A/D Result=40 04:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:46 Get A/D filter: -9.255963e+061 result=40 04:25:46 Get A/D value=-858993460 result=40 04:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:46 Aux= 04:25:46 Message to Camera, serial 39352 queued 04:26:23 Received message from Master: op=PointingHead serial=39365 04:26:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:26:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:26:23 Point started: ret=0 04:26:23 point_skyscan result=0 04:26:24 Check angles 04:26:24 SkyScan query 04:26:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 04:26:24 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 04:26:24 Check angles 04:26:24 SkyScan query 04:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.775<-14985 Statuses=0008 0009 04:26:25 Msec=750 True Az=112.995 Ze=-44.775 Az status=0008 Ze status=0009 04:26:25 Check angles 04:26:25 SkyScan query 04:26:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 04:26:26 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 04:26:26 Check angles 04:26:26 SkyScan query 04:26:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 04:26:26 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 04:26:27 Check angles 04:26:27 SkyScan query 04:26:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.61<-19174 Statuses=0008 0009 04:26:27 Msec=3000 True Az=112.995 Ze=-107.61 Az status=0008 Ze status=0009 04:26:27 Check angles 04:26:27 SkyScan query 04:26:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.985<-20599 Statuses=0008 0009 04:26:28 Msec=3750 True Az=112.995 Ze=-128.985 Az status=0008 Ze status=0009 04:26:28 Check angles 04:26:28 SkyScan query 04:26:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.94<-21996 Statuses=0008 0009 04:26:29 Msec=4500 True Az=112.995 Ze=-149.94 Az status=0008 Ze status=0009 04:26:29 Check angles 04:26:29 SkyScan query 04:26:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.82<-23388 Statuses=0008 0009 04:26:29 Msec=5250 True Az=112.995 Ze=-170.82 Az status=0008 Ze status=0009 04:26:30 Check angles 04:26:30 SkyScan query 04:26:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:26:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:26:30 Message to Master queued w/err=0: serial=39365 error=0 04:26:35 Received message from Master: op=Filter serial=39366 04:26:35 Color wheel filter change from 0 to 0 04:26:35 FLIGetFilterPos err=0 currentPosition=0 04:26:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:35 Filter is already there-color wheel unchanged 04:26:35 Received message from Master: op=Shutter serial=39367 04:26:35 Shutter LASER open 04:26:36 Received message from Camera: op=State serial=39369 04:26:36 GetSingleValue result=40 Value=cccccccc 04:26:36 SkyScan query 04:26:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:26:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:36 Parameters OK 04:26:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:36 Set A/D data flow result=40 04:26:36 Set A/D channel type result=40 04:26:36 Set A/D encoding result=40 04:26:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:36 Set channel filter=0.000000e+000 result=40 04:26:36 Config A/D Result=40 04:26:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:36 Get A/D filter: -9.255963e+061 result=40 04:26:36 Get A/D value=-858993460 result=40 04:26:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:36 Parameters OK 04:26:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:36 Set A/D data flow result=40 04:26:36 Set A/D channel type result=40 04:26:36 Set A/D encoding result=40 04:26:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:36 Set channel filter=0.000000e+000 result=40 04:26:36 Config A/D Result=40 04:26:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:36 Get A/D filter: -9.255963e+061 result=40 04:26:36 Get A/D value=-858993460 result=40 04:26:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:36 Aux= 04:26:36 Message to Camera, serial 39369 queued 04:26:45 Received message from Master: op=Shutter serial=39379 04:26:45 Shutter LASER close 04:26:45 Received message from Master: op=PointingHead serial=39383 04:26:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:26:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:26:45 Point started: ret=0 04:26:45 point_skyscan result=0 04:26:46 Check angles 04:26:46 SkyScan query 04:26:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 04:26:47 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 04:26:47 Check angles 04:26:47 SkyScan query 04:26:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 04:26:47 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 04:26:48 Check angles 04:26:48 SkyScan query 04:26:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 04:26:48 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 04:26:48 Check angles 04:26:48 SkyScan query 04:26:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 04:26:49 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 04:26:49 Check angles 04:26:49 SkyScan query 04:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.695<-15913 Statuses=0008 0009 04:26:50 Msec=3000 True Az=112.995 Ze=-58.695 Az status=0008 Ze status=0009 04:26:50 Check angles 04:26:50 SkyScan query 04:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.305<-14487 Statuses=0008 0009 04:26:50 Msec=3750 True Az=112.995 Ze=-37.305 Az status=0008 Ze status=0009 04:26:51 Check angles 04:26:51 SkyScan query 04:26:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.32<-13088 Statuses=0008 0009 04:26:51 Msec=4500 True Az=112.995 Ze=-16.32 Az status=0008 Ze status=0009 04:26:51 Check angles 04:26:51 SkyScan query 04:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=4.515<-11699 Statuses=0008 0009 04:26:52 Msec=5250 True Az=112.995 Ze=4.515 Az status=0008 Ze status=0009 04:26:52 Check angles 04:26:52 SkyScan query 04:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:26:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:26:53 Message to Master queued w/err=0: serial=39383 error=0 04:26:58 Received message from Master: op=Filter serial=39384 04:26:58 Color wheel filter change from 0 to 0 04:26:58 FLIGetFilterPos err=0 currentPosition=0 04:26:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:58 Filter is already there-color wheel unchanged 04:26:58 Received message from Master: op=Shutter serial=39385 04:26:58 Shutter LASER close 04:26:58 Received message from Camera: op=State serial=39387 04:26:58 GetSingleValue result=40 Value=cccccccc 04:26:58 SkyScan query 04:26:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:26:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:59 Parameters OK 04:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:59 Set A/D data flow result=40 04:26:59 Set A/D channel type result=40 04:26:59 Set A/D encoding result=40 04:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:59 Set channel filter=0.000000e+000 result=40 04:26:59 Config A/D Result=40 04:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:59 Get A/D filter: -9.255963e+061 result=40 04:26:59 Get A/D value=-858993460 result=40 04:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:59 Parameters OK 04:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:59 Set A/D data flow result=40 04:26:59 Set A/D channel type result=40 04:26:59 Set A/D encoding result=40 04:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:59 Set channel filter=0.000000e+000 result=40 04:26:59 Config A/D Result=40 04:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:59 Get A/D filter: -9.255963e+061 result=40 04:26:59 Get A/D value=-858993460 result=40 04:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:59 Aux= 04:26:59 Message to Camera, serial 39387 queued 04:27:36 Received message from Master: op=PointingHead serial=39400 04:27:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:27:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:27:36 Point started: ret=0 04:27:36 point_skyscan result=0 04:27:37 Check angles 04:27:37 SkyScan query 04:27:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:27:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:27:37 Message to Master queued w/err=0: serial=39400 error=0 04:27:42 Received message from Master: op=Filter serial=39401 04:27:42 Color wheel filter change from 0 to 0 04:27:42 FLIGetFilterPos err=0 currentPosition=0 04:27:42 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:42 Filter is already there-color wheel unchanged 04:27:42 Received message from Master: op=Shutter serial=39402 04:27:42 Shutter LASER close 04:27:42 Received message from Camera: op=State serial=39404 04:27:42 GetSingleValue result=40 Value=cccccccc 04:27:42 SkyScan query 04:27:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:27:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:43 Parameters OK 04:27:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:43 Set A/D data flow result=40 04:27:43 Set A/D channel type result=40 04:27:43 Set A/D encoding result=40 04:27:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:43 Set channel filter=0.000000e+000 result=40 04:27:43 Config A/D Result=40 04:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:43 Get A/D filter: -9.255963e+061 result=40 04:27:43 Get A/D value=-858993460 result=40 04:27:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:43 Parameters OK 04:27:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:43 Set A/D data flow result=40 04:27:43 Set A/D channel type result=40 04:27:43 Set A/D encoding result=40 04:27:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:43 Set channel filter=0.000000e+000 result=40 04:27:43 Config A/D Result=40 04:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:43 Get A/D filter: -9.255963e+061 result=40 04:27:43 Get A/D value=-858993460 result=40 04:27:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:43 Aux= 04:27:43 Message to Camera, serial 39404 queued 04:28:19 Received message from Master: op=PointingHead serial=39416 04:28:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:28:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:28:19 Point started: ret=0 04:28:19 point_skyscan result=0 04:28:20 Check angles 04:28:20 SkyScan query 04:28:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:28:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:28:21 Message to Master queued w/err=0: serial=39416 error=0 04:28:26 Received message from Master: op=Filter serial=39417 04:28:26 Color wheel filter change from 0 to 0 04:28:26 FLIGetFilterPos err=0 currentPosition=0 04:28:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:26 Filter is already there-color wheel unchanged 04:28:26 Received message from Master: op=Shutter serial=39418 04:28:26 Shutter LASER close 04:28:26 Received message from Camera: op=State serial=39420 04:28:26 GetSingleValue result=40 Value=cccccccc 04:28:26 SkyScan query 04:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:28:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:26 Parameters OK 04:28:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:26 Set A/D data flow result=40 04:28:26 Set A/D channel type result=40 04:28:26 Set A/D encoding result=40 04:28:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:26 Set channel filter=0.000000e+000 result=40 04:28:26 Config A/D Result=40 04:28:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:26 Get A/D filter: -9.255963e+061 result=40 04:28:26 Get A/D value=-858993460 result=40 04:28:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:26 Parameters OK 04:28:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:26 Set A/D data flow result=40 04:28:26 Set A/D channel type result=40 04:28:26 Set A/D encoding result=40 04:28:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:26 Set channel filter=0.000000e+000 result=40 04:28:26 Config A/D Result=40 04:28:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:26 Get A/D filter: -9.255963e+061 result=40 04:28:26 Get A/D value=-858993460 result=40 04:28:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:26 Aux= 04:28:26 Message to Camera, serial 39420 queued 04:29:03 Received message from Master: op=PointingHead serial=39433 04:29:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:29:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:29:03 Point started: ret=0 04:29:03 point_skyscan result=0 04:29:04 Check angles 04:29:04 SkyScan query 04:29:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:29:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:29:05 Message to Master queued w/err=0: serial=39433 error=0 04:29:10 Received message from Master: op=Filter serial=39434 04:29:10 Color wheel filter change from 0 to 0 04:29:10 FLIGetFilterPos err=0 currentPosition=0 04:29:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:10 Filter is already there-color wheel unchanged 04:29:10 Received message from Master: op=Shutter serial=39435 04:29:10 Shutter LASER close 04:29:10 Received message from Camera: op=State serial=39437 04:29:10 GetSingleValue result=40 Value=cccccccc 04:29:10 SkyScan query 04:29:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:29:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:11 Parameters OK 04:29:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:11 Set A/D data flow result=40 04:29:11 Set A/D channel type result=40 04:29:11 Set A/D encoding result=40 04:29:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:11 Set channel filter=0.000000e+000 result=40 04:29:11 Config A/D Result=40 04:29:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:11 Get A/D filter: -9.255963e+061 result=40 04:29:11 Get A/D value=-858993460 result=40 04:29:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:11 Parameters OK 04:29:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:11 Set A/D data flow result=40 04:29:11 Set A/D channel type result=40 04:29:11 Set A/D encoding result=40 04:29:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:11 Set channel filter=0.000000e+000 result=40 04:29:11 Config A/D Result=40 04:29:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:11 Get A/D filter: -9.255963e+061 result=40 04:29:11 Get A/D value=-858993460 result=40 04:29:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:11 Aux= 04:29:11 Message to Camera, serial 39437 queued 04:29:47 Received message from Master: op=PointingHead serial=39449 04:29:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:29:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:29:47 Point started: ret=0 04:29:47 point_skyscan result=0 04:29:48 Check angles 04:29:48 SkyScan query 04:29:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 04:29:48 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 04:29:48 Check angles 04:29:48 SkyScan query 04:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.175<-14945 Statuses=0008 0009 04:29:49 Msec=750 True Az=112.995 Ze=-44.175 Az status=0008 Ze status=0009 04:29:49 Check angles 04:29:49 SkyScan query 04:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 04:29:50 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 04:29:50 Check angles 04:29:50 SkyScan query 04:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.07<-17738 Statuses=0008 0009 04:29:50 Msec=2250 True Az=112.995 Ze=-86.07 Az status=0008 Ze status=0009 04:29:51 Check angles 04:29:51 SkyScan query 04:29:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.025<-19135 Statuses=0008 0009 04:29:51 Msec=3000 True Az=112.995 Ze=-107.025 Az status=0008 Ze status=0009 04:29:51 Check angles 04:29:51 SkyScan query 04:29:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.98<-20532 Statuses=0008 0009 04:29:52 Msec=3750 True Az=112.995 Ze=-127.98 Az status=0008 Ze status=0009 04:29:52 Check angles 04:29:52 SkyScan query 04:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.935<-21929 Statuses=0008 0009 04:29:53 Msec=4500 True Az=112.995 Ze=-148.935 Az status=0008 Ze status=0009 04:29:53 Check angles 04:29:53 SkyScan query 04:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.875<-23325 Statuses=0008 0009 04:29:53 Msec=5250 True Az=112.995 Ze=-169.875 Az status=0008 Ze status=0009 04:29:54 Check angles 04:29:54 SkyScan query 04:29:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:29:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:29:54 Message to Master queued w/err=0: serial=39449 error=0 04:29:59 Received message from Master: op=Filter serial=39450 04:29:59 Color wheel filter change from 0 to 0 04:29:59 FLIGetFilterPos err=0 currentPosition=0 04:29:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:59 Filter is already there-color wheel unchanged 04:29:59 Received message from Master: op=Shutter serial=39451 04:29:59 Shutter LASER open 04:30:00 Received message from Camera: op=State serial=39453 04:30:00 GetSingleValue result=40 Value=cccccccc 04:30:00 SkyScan query 04:30:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:30:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:00 Parameters OK 04:30:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:00 Set A/D data flow result=40 04:30:00 Set A/D channel type result=40 04:30:00 Set A/D encoding result=40 04:30:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:00 Set channel filter=0.000000e+000 result=40 04:30:00 Config A/D Result=40 04:30:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:00 Get A/D filter: -9.255963e+061 result=40 04:30:00 Get A/D value=-858993460 result=40 04:30:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:00 Parameters OK 04:30:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:00 Set A/D data flow result=40 04:30:00 Set A/D channel type result=40 04:30:00 Set A/D encoding result=40 04:30:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:00 Set channel filter=0.000000e+000 result=40 04:30:00 Config A/D Result=40 04:30:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:00 Get A/D filter: -9.255963e+061 result=40 04:30:00 Get A/D value=-858993460 result=40 04:30:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:00 Aux= 04:30:00 Message to Camera, serial 39453 queued 04:30:09 Received message from Master: op=Shutter serial=39463 04:30:09 Shutter LASER close 04:30:09 Received message from Master: op=PointingHead serial=39467 04:30:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:30:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:30:09 Point started: ret=0 04:30:09 point_skyscan result=0 04:30:10 Check angles 04:30:10 SkyScan query 04:30:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 04:30:11 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 04:30:11 Check angles 04:30:11 SkyScan query 04:30:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 04:30:12 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 04:30:12 Check angles 04:30:12 SkyScan query 04:30:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.605<-18707 Statuses=0008 0009 04:30:12 Msec=1500 True Az=112.995 Ze=-100.605 Az status=0008 Ze status=0009 04:30:12 Check angles 04:30:12 SkyScan query 04:30:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 04:30:13 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 04:30:13 Check angles 04:30:13 SkyScan query 04:30:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.71<-15914 Statuses=0008 0009 04:30:14 Msec=3000 True Az=112.995 Ze=-58.71 Az status=0008 Ze status=0009 04:30:14 Check angles 04:30:14 SkyScan query 04:30:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 04:30:15 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 04:30:15 Check angles 04:30:15 SkyScan query 04:30:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.335<-13089 Statuses=0008 0009 04:30:15 Msec=4500 True Az=112.995 Ze=-16.335 Az status=0008 Ze status=0009 04:30:15 Check angles 04:30:15 SkyScan query 04:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=4.515<-11699 Statuses=0008 0009 04:30:16 Msec=5250 True Az=112.995 Ze=4.515 Az status=0008 Ze status=0009 04:30:16 Check angles 04:30:16 SkyScan query 04:30:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:30:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:30:17 Message to Master queued w/err=0: serial=39467 error=0 04:30:22 Received message from Master: op=Filter serial=39468 04:30:22 Color wheel filter change from 0 to 0 04:30:22 FLIGetFilterPos err=0 currentPosition=0 04:30:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:22 Filter is already there-color wheel unchanged 04:30:22 Received message from Master: op=Shutter serial=39469 04:30:22 Shutter LASER close 04:30:22 Received message from Camera: op=State serial=39471 04:30:22 GetSingleValue result=40 Value=cccccccc 04:30:22 SkyScan query 04:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:30:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:23 Parameters OK 04:30:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:23 Set A/D data flow result=40 04:30:23 Set A/D channel type result=40 04:30:23 Set A/D encoding result=40 04:30:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:23 Set channel filter=0.000000e+000 result=40 04:30:23 Config A/D Result=40 04:30:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:23 Get A/D filter: -9.255963e+061 result=40 04:30:23 Get A/D value=-858993460 result=40 04:30:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:23 Parameters OK 04:30:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:23 Set A/D data flow result=40 04:30:23 Set A/D channel type result=40 04:30:23 Set A/D encoding result=40 04:30:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:23 Set channel filter=0.000000e+000 result=40 04:30:23 Config A/D Result=40 04:30:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:23 Get A/D filter: -9.255963e+061 result=40 04:30:23 Get A/D value=-858993460 result=40 04:30:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:23 Aux= 04:30:23 Message to Camera, serial 39471 queued 04:31:00 Received message from Master: op=PointingHead serial=39484 04:31:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:31:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:31:00 Point started: ret=0 04:31:00 point_skyscan result=0 04:31:01 Check angles 04:31:01 SkyScan query 04:31:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:31:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:31:01 Message to Master queued w/err=0: serial=39484 error=0 04:31:06 Received message from Master: op=Filter serial=39485 04:31:06 Color wheel filter change from 0 to 0 04:31:06 FLIGetFilterPos err=0 currentPosition=0 04:31:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:06 Filter is already there-color wheel unchanged 04:31:06 Received message from Master: op=Shutter serial=39486 04:31:06 Shutter LASER close 04:31:06 Received message from Camera: op=State serial=39488 04:31:06 GetSingleValue result=40 Value=cccccccc 04:31:06 SkyScan query 04:31:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:31:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:07 Parameters OK 04:31:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:07 Set A/D data flow result=40 04:31:07 Set A/D channel type result=40 04:31:07 Set A/D encoding result=40 04:31:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:07 Set channel filter=0.000000e+000 result=40 04:31:07 Config A/D Result=40 04:31:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:07 Get A/D filter: -9.255963e+061 result=40 04:31:07 Get A/D value=-858993460 result=40 04:31:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:07 Parameters OK 04:31:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:07 Set A/D data flow result=40 04:31:07 Set A/D channel type result=40 04:31:07 Set A/D encoding result=40 04:31:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:07 Set channel filter=0.000000e+000 result=40 04:31:07 Config A/D Result=40 04:31:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:07 Get A/D filter: -9.255963e+061 result=40 04:31:07 Get A/D value=-858993460 result=40 04:31:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:07 Aux= 04:31:07 Message to Camera, serial 39488 queued 04:31:44 Received message from Master: op=PointingHead serial=39501 04:31:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:31:44 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:31:44 Point started: ret=0 04:31:44 point_skyscan result=0 04:31:45 Check angles 04:31:45 SkyScan query 04:31:45 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.495<-12433 Statuses=0009 0008 04:31:45 Msec=0 True Az=136.11 Ze=-6.495 Az status=0009 Ze status=0008 04:31:46 Check angles 04:31:46 SkyScan query 04:31:46 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.48<-12432 Statuses=0009 0008 04:31:46 Msec=750 True Az=153.705 Ze=-6.48 Az status=0009 Ze status=0008 04:31:46 Check angles 04:31:46 SkyScan query 04:31:47 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.48<-12432 Statuses=0009 0008 04:31:47 Msec=1500 True Az=171.15 Ze=-6.48 Az status=0009 Ze status=0008 04:31:47 Check angles 04:31:47 SkyScan query 04:31:48 SkyScan query done: ret=0 az=175.98<-11732 ze=-6.48<-12432 Statuses=0008 0008 04:31:48 Msec=2250 True Az=175.98 Ze=-6.48 Az status=0008 Ze status=0008 04:31:48 Message to Master queued w/err=0: serial=39501 error=0 04:31:53 Received message from Master: op=Filter serial=39502 04:31:53 Color wheel filter change from 0 to 0 04:31:53 FLIGetFilterPos err=0 currentPosition=0 04:31:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:53 Filter is already there-color wheel unchanged 04:31:53 Received message from Master: op=Shutter serial=39503 04:31:53 Shutter LASER close 04:31:53 Received message from Camera: op=State serial=39505 04:31:53 GetSingleValue result=40 Value=cccccccc 04:31:53 SkyScan query 04:31:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:31:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:54 Parameters OK 04:31:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:54 Set A/D data flow result=40 04:31:54 Set A/D channel type result=40 04:31:54 Set A/D encoding result=40 04:31:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:54 Set channel filter=0.000000e+000 result=40 04:31:54 Config A/D Result=40 04:31:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:54 Get A/D filter: -9.255963e+061 result=40 04:31:54 Get A/D value=-858993460 result=40 04:31:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:54 Parameters OK 04:31:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:54 Set A/D data flow result=40 04:31:54 Set A/D channel type result=40 04:31:54 Set A/D encoding result=40 04:31:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:54 Set channel filter=0.000000e+000 result=40 04:31:54 Config A/D Result=40 04:31:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:54 Get A/D filter: -9.255963e+061 result=40 04:31:54 Get A/D value=-858993460 result=40 04:31:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:54 Aux= 04:31:54 Message to Camera, serial 39505 queued 04:32:30 Received message from Master: op=PointingHead serial=39518 04:32:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:32:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:32:31 Point started: ret=0 04:32:31 point_skyscan result=0 04:32:32 Check angles 04:32:32 SkyScan query 04:32:32 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 04:32:32 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 04:32:32 Check angles 04:32:32 SkyScan query 04:32:33 SkyScan query done: ret=0 az=135.735<-9049 ze=6.495<-11567 Statuses=0009 0008 04:32:33 Msec=750 True Az=135.735 Ze=6.495 Az status=0009 Ze status=0008 04:32:33 Check angles 04:32:33 SkyScan query 04:32:34 SkyScan query done: ret=0 az=118.215<-7881 ze=6.495<-11567 Statuses=0009 0008 04:32:34 Msec=1500 True Az=118.215 Ze=6.495 Az status=0009 Ze status=0008 04:32:34 Check angles 04:32:34 SkyScan query 04:32:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:32:34 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:32:34 Message to Master queued w/err=0: serial=39518 error=0 04:32:39 Received message from Master: op=Filter serial=39519 04:32:39 Color wheel filter change from 0 to 0 04:32:39 FLIGetFilterPos err=0 currentPosition=0 04:32:39 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:39 Filter is already there-color wheel unchanged 04:32:40 Received message from Master: op=Shutter serial=39520 04:32:40 Shutter LASER close 04:32:40 Received message from Camera: op=State serial=39522 04:32:40 GetSingleValue result=40 Value=cccccccc 04:32:40 SkyScan query 04:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:32:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:40 Parameters OK 04:32:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:40 Set A/D data flow result=40 04:32:40 Set A/D channel type result=40 04:32:40 Set A/D encoding result=40 04:32:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:40 Set channel filter=0.000000e+000 result=40 04:32:40 Config A/D Result=40 04:32:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:40 Get A/D filter: -9.255963e+061 result=40 04:32:40 Get A/D value=-858993460 result=40 04:32:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:40 Parameters OK 04:32:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:40 Set A/D data flow result=40 04:32:40 Set A/D channel type result=40 04:32:40 Set A/D encoding result=40 04:32:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:40 Set channel filter=0.000000e+000 result=40 04:32:40 Config A/D Result=40 04:32:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:40 Get A/D filter: -9.255963e+061 result=40 04:32:40 Get A/D value=-858993460 result=40 04:32:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:32:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:32:40 Aux= 04:32:40 Message to Camera, serial 39522 queued 04:33:17 Received message from Master: op=PointingHead serial=39535 04:33:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:33:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:33:17 Point started: ret=0 04:33:17 point_skyscan result=0 04:33:18 Check angles 04:33:18 SkyScan query 04:33:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 04:33:19 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 04:33:19 Check angles 04:33:19 SkyScan query 04:33:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 04:33:19 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 04:33:20 Check angles 04:33:20 SkyScan query 04:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 04:33:20 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 04:33:20 Check angles 04:33:20 SkyScan query 04:33:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.73<-17782 Statuses=0008 0009 04:33:21 Msec=2250 True Az=112.995 Ze=-86.73 Az status=0008 Ze status=0009 04:33:21 Check angles 04:33:21 SkyScan query 04:33:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.105<-19207 Statuses=0008 0009 04:33:22 Msec=3000 True Az=112.995 Ze=-108.105 Az status=0008 Ze status=0009 04:33:22 Check angles 04:33:22 SkyScan query 04:33:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.045<-20603 Statuses=0008 0009 04:33:22 Msec=3750 True Az=112.995 Ze=-129.045 Az status=0008 Ze status=0009 04:33:23 Check angles 04:33:23 SkyScan query 04:33:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.45<-22030 Statuses=0008 0009 04:33:23 Msec=4500 True Az=112.995 Ze=-150.45 Az status=0008 Ze status=0009 04:33:23 Check angles 04:33:23 SkyScan query 04:33:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.54<-23436 Statuses=0008 0009 04:33:24 Msec=5250 True Az=112.995 Ze=-171.54 Az status=0008 Ze status=0009 04:33:24 Check angles 04:33:24 SkyScan query 04:33:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:33:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:33:25 Message to Master queued w/err=0: serial=39535 error=0 04:33:30 Received message from Master: op=Filter serial=39536 04:33:30 Color wheel filter change from 0 to 0 04:33:30 FLIGetFilterPos err=0 currentPosition=0 04:33:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:30 Filter is already there-color wheel unchanged 04:33:30 Received message from Master: op=Shutter serial=39537 04:33:30 Shutter LASER open 04:33:30 Received message from Camera: op=State serial=39539 04:33:30 GetSingleValue result=40 Value=cccccccc 04:33:30 SkyScan query 04:33:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:33:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:31 Parameters OK 04:33:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:31 Set A/D data flow result=40 04:33:31 Set A/D channel type result=40 04:33:31 Set A/D encoding result=40 04:33:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:31 Set channel filter=0.000000e+000 result=40 04:33:31 Config A/D Result=40 04:33:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:31 Get A/D filter: -9.255963e+061 result=40 04:33:31 Get A/D value=-858993460 result=40 04:33:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:31 Parameters OK 04:33:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:31 Set A/D data flow result=40 04:33:31 Set A/D channel type result=40 04:33:31 Set A/D encoding result=40 04:33:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:31 Set channel filter=0.000000e+000 result=40 04:33:31 Config A/D Result=40 04:33:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:31 Get A/D filter: -9.255963e+061 result=40 04:33:31 Get A/D value=-858993460 result=40 04:33:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:31 Aux= 04:33:31 Message to Camera, serial 39539 queued 04:33:38 Received message from Master: op=Identify serial=39547 04:33:39 Received message from Master: op=Shutter serial=39552 04:33:39 Shutter LASER close 04:33:40 Received message from Master: op=PointingHead serial=39556 04:33:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:33:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:33:40 Point started: ret=0 04:33:40 point_skyscan result=0 04:33:41 Check angles 04:33:41 SkyScan query 04:33:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 04:33:41 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 04:33:41 Check angles 04:33:41 SkyScan query 04:33:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 04:33:42 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 04:33:42 Check angles 04:33:42 SkyScan query 04:33:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 04:33:43 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 04:33:43 Check angles 04:33:43 SkyScan query 04:33:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 04:33:43 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 04:33:44 Check angles 04:33:44 SkyScan query 04:33:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.755<-15917 Statuses=0008 0009 04:33:44 Msec=3000 True Az=112.995 Ze=-58.755 Az status=0008 Ze status=0009 04:33:44 Check angles 04:33:44 SkyScan query 04:33:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.785<-14519 Statuses=0008 0009 04:33:45 Msec=3750 True Az=112.995 Ze=-37.785 Az status=0008 Ze status=0009 04:33:45 Check angles 04:33:45 SkyScan query 04:33:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 04:33:46 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 04:33:46 Check angles 04:33:46 SkyScan query 04:33:47 SkyScan query done: ret=0 az=112.995<-7533 ze=4.455<-11703 Statuses=0008 0009 04:33:47 Msec=5250 True Az=112.995 Ze=4.455 Az status=0008 Ze status=0009 04:33:47 Check angles 04:33:47 SkyScan query 04:33:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:33:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:33:47 Message to Master queued w/err=0: serial=39556 error=0 04:33:52 Received message from Master: op=Filter serial=39557 04:33:52 Color wheel filter change from 0 to 0 04:33:52 FLIGetFilterPos err=0 currentPosition=0 04:33:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:52 Filter is already there-color wheel unchanged 04:33:52 Received message from Master: op=Shutter serial=39558 04:33:52 Shutter LASER close 04:33:53 Received message from Camera: op=State serial=39560 04:33:53 GetSingleValue result=40 Value=cccccccc 04:33:53 SkyScan query 04:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:53 Parameters OK 04:33:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:53 Set A/D data flow result=40 04:33:53 Set A/D channel type result=40 04:33:53 Set A/D encoding result=40 04:33:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:53 Set channel filter=0.000000e+000 result=40 04:33:53 Config A/D Result=40 04:33:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:53 Get A/D filter: -9.255963e+061 result=40 04:33:53 Get A/D value=-858993460 result=40 04:33:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:53 Parameters OK 04:33:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:53 Set A/D data flow result=40 [UTC 2019-3-1 04:33:53] 04:33:53 Set A/D channel type result=40 04:33:53 Set A/D encoding result=40 04:33:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:53 Set channel filter=0.000000e+000 result=40 04:33:53 Config A/D Result=40 04:33:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:53 Get A/D filter: -9.255963e+061 result=40 04:33:53 Get A/D value=-858993460 result=40 04:33:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:53 Aux= 04:33:53 Message to Camera, serial 39560 queued 04:34:30 Received message from Master: op=PointingHead serial=39573 04:34:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:34:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:34:30 Point started: ret=0 04:34:30 point_skyscan result=0 04:34:31 Check angles 04:34:31 SkyScan query 04:34:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:34:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:34:32 Message to Master queued w/err=0: serial=39573 error=0 04:34:37 Received message from Master: op=Filter serial=39574 04:34:37 Color wheel filter change from 0 to 0 04:34:37 FLIGetFilterPos err=0 currentPosition=0 04:34:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:37 Filter is already there-color wheel unchanged 04:34:37 Received message from Master: op=Shutter serial=39575 04:34:37 Shutter LASER close 04:34:37 Received message from Camera: op=State serial=39577 04:34:37 GetSingleValue result=40 Value=cccccccc 04:34:37 SkyScan query 04:34:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:34:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:38 Parameters OK 04:34:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:38 Set A/D data flow result=40 04:34:38 Set A/D channel type result=40 04:34:38 Set A/D encoding result=40 04:34:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:38 Set channel filter=0.000000e+000 result=40 04:34:38 Config A/D Result=40 04:34:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:38 Get A/D filter: -9.255963e+061 result=40 04:34:38 Get A/D value=-858993460 result=40 04:34:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:38 Parameters OK 04:34:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:38 Set A/D data flow result=40 04:34:38 Set A/D channel type result=40 04:34:38 Set A/D encoding result=40 04:34:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:38 Set channel filter=0.000000e+000 result=40 04:34:38 Config A/D Result=40 04:34:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:38 Get A/D filter: -9.255963e+061 result=40 04:34:38 Get A/D value=-858993460 result=40 04:34:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:38 Aux= 04:34:38 Message to Camera, serial 39577 queued 04:35:14 Received message from Master: op=PointingHead serial=39590 04:35:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:35:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:35:15 Point started: ret=0 04:35:15 point_skyscan result=0 04:35:15 Check angles 04:35:15 SkyScan query 04:35:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:35:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:35:16 Message to Master queued w/err=0: serial=39590 error=0 04:35:21 Received message from Master: op=Filter serial=39591 04:35:21 Color wheel filter change from 0 to 0 04:35:21 FLIGetFilterPos err=0 currentPosition=0 04:35:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:21 Filter is already there-color wheel unchanged 04:35:21 Received message from Master: op=Shutter serial=39592 04:35:21 Shutter LASER close 04:35:21 Received message from Camera: op=State serial=39594 04:35:21 GetSingleValue result=40 Value=cccccccc 04:35:21 SkyScan query 04:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:35:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:22 Parameters OK 04:35:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:22 Set A/D data flow result=40 04:35:22 Set A/D channel type result=40 04:35:22 Set A/D encoding result=40 04:35:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:22 Set channel filter=0.000000e+000 result=40 04:35:22 Config A/D Result=40 04:35:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:22 Get A/D filter: -9.255963e+061 result=40 04:35:22 Get A/D value=-858993460 result=40 04:35:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:22 Parameters OK 04:35:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:22 Set A/D data flow result=40 04:35:22 Set A/D channel type result=40 04:35:22 Set A/D encoding result=40 04:35:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:22 Set channel filter=0.000000e+000 result=40 04:35:22 Config A/D Result=40 04:35:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:22 Get A/D filter: -9.255963e+061 result=40 04:35:22 Get A/D value=-858993460 result=40 04:35:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:22 Aux= 04:35:22 Message to Camera, serial 39594 queued 04:35:59 Received message from Master: op=PointingHead serial=39607 04:35:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:35:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:35:59 Point started: ret=0 04:35:59 point_skyscan result=0 04:36:00 Check angles 04:36:00 SkyScan query 04:36:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:36:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:36:00 Message to Master queued w/err=0: serial=39607 error=0 04:36:05 Received message from Master: op=Filter serial=39608 04:36:05 Color wheel filter change from 0 to 0 04:36:05 FLIGetFilterPos err=0 currentPosition=0 04:36:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:05 Filter is already there-color wheel unchanged 04:36:05 Received message from Master: op=Shutter serial=39609 04:36:05 Shutter LASER close 04:36:06 Received message from Camera: op=State serial=39611 04:36:06 GetSingleValue result=40 Value=cccccccc 04:36:06 SkyScan query 04:36:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:36:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:06 Parameters OK 04:36:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:06 Set A/D data flow result=40 04:36:06 Set A/D channel type result=40 04:36:06 Set A/D encoding result=40 04:36:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:06 Set channel filter=0.000000e+000 result=40 04:36:06 Config A/D Result=40 04:36:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:06 Get A/D filter: -9.255963e+061 result=40 04:36:06 Get A/D value=-858993460 result=40 04:36:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:06 Parameters OK 04:36:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:06 Set A/D data flow result=40 04:36:06 Set A/D channel type result=40 04:36:06 Set A/D encoding result=40 04:36:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:06 Set channel filter=0.000000e+000 result=40 04:36:06 Config A/D Result=40 04:36:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:06 Get A/D filter: -9.255963e+061 result=40 04:36:06 Get A/D value=-858993460 result=40 04:36:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:06 Aux= 04:36:06 Message to Camera, serial 39611 queued 04:36:43 Received message from Master: op=PointingHead serial=39624 04:36:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:36:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:36:43 Point started: ret=0 04:36:43 point_skyscan result=0 04:36:44 Check angles 04:36:44 SkyScan query 04:36:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 04:36:45 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 04:36:45 Check angles 04:36:45 SkyScan query 04:36:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 04:36:45 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 04:36:46 Check angles 04:36:46 SkyScan query 04:36:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.28<-16352 Statuses=0008 0009 04:36:46 Msec=1500 True Az=112.995 Ze=-65.28 Az status=0008 Ze status=0009 04:36:46 Check angles 04:36:46 SkyScan query 04:36:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.235<-17749 Statuses=0008 0009 04:36:47 Msec=2250 True Az=112.995 Ze=-86.235 Az status=0008 Ze status=0009 04:36:47 Check angles 04:36:47 SkyScan query 04:36:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.175<-19145 Statuses=0008 0009 04:36:48 Msec=3000 True Az=112.995 Ze=-107.175 Az status=0008 Ze status=0009 04:36:48 Check angles 04:36:48 SkyScan query 04:36:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.145<-20543 Statuses=0008 0009 04:36:48 Msec=3750 True Az=112.995 Ze=-128.145 Az status=0008 Ze status=0009 04:36:49 Check angles 04:36:49 SkyScan query 04:36:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.1<-21940 Statuses=0008 0009 04:36:49 Msec=4500 True Az=112.995 Ze=-149.1 Az status=0008 Ze status=0009 04:36:49 Check angles 04:36:49 SkyScan query 04:36:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.46<-23364 Statuses=0008 0009 04:36:50 Msec=5250 True Az=112.995 Ze=-170.46 Az status=0008 Ze status=0009 04:36:50 Check angles 04:36:50 SkyScan query 04:36:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:36:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:36:51 Message to Master queued w/err=0: serial=39624 error=0 04:36:56 Received message from Master: op=Filter serial=39625 04:36:56 Color wheel filter change from 0 to 0 04:36:56 FLIGetFilterPos err=0 currentPosition=0 04:36:56 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:56 Filter is already there-color wheel unchanged 04:36:56 Received message from Master: op=Shutter serial=39626 04:36:56 Shutter LASER open 04:36:56 Received message from Camera: op=State serial=39628 04:36:56 GetSingleValue result=40 Value=cccccccc 04:36:56 SkyScan query 04:36:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:36:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:57 Parameters OK 04:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:57 Set A/D data flow result=40 04:36:57 Set A/D channel type result=40 04:36:57 Set A/D encoding result=40 04:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:57 Set channel filter=0.000000e+000 result=40 04:36:57 Config A/D Result=40 04:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:57 Get A/D filter: -9.255963e+061 result=40 04:36:57 Get A/D value=-858993460 result=40 04:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:57 Parameters OK 04:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:57 Set A/D data flow result=40 04:36:57 Set A/D channel type result=40 04:36:57 Set A/D encoding result=40 04:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:57 Set channel filter=0.000000e+000 result=40 04:36:57 Config A/D Result=40 04:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:57 Get A/D filter: -9.255963e+061 result=40 04:36:57 Get A/D value=-858993460 result=40 04:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:57 Aux= 04:36:57 Message to Camera, serial 39628 queued 04:37:05 Received message from Master: op=Shutter serial=39638 04:37:05 Shutter LASER close 04:37:06 Received message from Master: op=PointingHead serial=39642 04:37:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:37:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:37:06 Point started: ret=0 04:37:06 point_skyscan result=0 04:37:07 Check angles 04:37:07 SkyScan query 04:37:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 04:37:07 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 04:37:08 Check angles 04:37:08 SkyScan query 04:37:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 04:37:08 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 04:37:08 Check angles 04:37:08 SkyScan query 04:37:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 04:37:09 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 04:37:09 Check angles 04:37:09 SkyScan query 04:37:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.5<-17300 Statuses=0008 0009 04:37:10 Msec=2250 True Az=112.995 Ze=-79.5 Az status=0008 Ze status=0009 04:37:10 Check angles 04:37:10 SkyScan query 04:37:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.545<-15903 Statuses=0008 0009 04:37:10 Msec=3000 True Az=112.995 Ze=-58.545 Az status=0008 Ze status=0009 04:37:11 Check angles 04:37:11 SkyScan query 04:37:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.155<-14477 Statuses=0008 0009 04:37:11 Msec=3750 True Az=112.995 Ze=-37.155 Az status=0008 Ze status=0009 04:37:11 Check angles 04:37:11 SkyScan query 04:37:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.2<-13080 Statuses=0008 0009 04:37:12 Msec=4500 True Az=112.995 Ze=-16.2 Az status=0008 Ze status=0009 04:37:12 Check angles 04:37:12 SkyScan query 04:37:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 04:37:13 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 04:37:13 Check angles 04:37:13 SkyScan query 04:37:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:37:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:37:13 Message to Master queued w/err=0: serial=39642 error=0 04:37:18 Received message from Master: op=Filter serial=39643 04:37:18 Color wheel filter change from 0 to 0 04:37:18 FLIGetFilterPos err=0 currentPosition=0 04:37:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:18 Filter is already there-color wheel unchanged 04:37:19 Received message from Master: op=Shutter serial=39644 04:37:19 Shutter LASER close 04:37:19 Received message from Camera: op=State serial=39646 04:37:19 GetSingleValue result=40 Value=cccccccc 04:37:19 SkyScan query 04:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:37:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:19 Parameters OK 04:37:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:19 Set A/D data flow result=40 04:37:19 Set A/D channel type result=40 04:37:19 Set A/D encoding result=40 04:37:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:19 Set channel filter=0.000000e+000 result=40 04:37:19 Config A/D Result=40 04:37:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:19 Get A/D filter: -9.255963e+061 result=40 04:37:19 Get A/D value=-858993460 result=40 04:37:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:19 Parameters OK 04:37:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:19 Set A/D data flow result=40 04:37:19 Set A/D channel type result=40 04:37:19 Set A/D encoding result=40 04:37:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:19 Set channel filter=0.000000e+000 result=40 04:37:19 Config A/D Result=40 04:37:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:19 Get A/D filter: -9.255963e+061 result=40 04:37:19 Get A/D value=-858993460 result=40 04:37:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:19 Aux= 04:37:19 Message to Camera, serial 39646 queued 04:37:56 Received message from Master: op=PointingHead serial=39659 04:37:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:37:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:37:56 Point started: ret=0 04:37:56 point_skyscan result=0 04:37:57 Check angles 04:37:57 SkyScan query 04:37:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:37:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:37:58 Message to Master queued w/err=0: serial=39659 error=0 04:38:03 Received message from Master: op=Filter serial=39660 04:38:03 Color wheel filter change from 0 to 0 04:38:03 FLIGetFilterPos err=0 currentPosition=0 04:38:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:03 Filter is already there-color wheel unchanged 04:38:03 Received message from Master: op=Shutter serial=39661 04:38:03 Shutter LASER close 04:38:03 Received message from Camera: op=State serial=39663 04:38:03 GetSingleValue result=40 Value=cccccccc 04:38:03 SkyScan query 04:38:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:38:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:04 Parameters OK 04:38:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:04 Set A/D data flow result=40 04:38:04 Set A/D channel type result=40 04:38:04 Set A/D encoding result=40 04:38:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:04 Set channel filter=0.000000e+000 result=40 04:38:04 Config A/D Result=40 04:38:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:04 Get A/D filter: -9.255963e+061 result=40 04:38:04 Get A/D value=-858993460 result=40 04:38:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:04 Parameters OK 04:38:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:04 Set A/D data flow result=40 04:38:04 Set A/D channel type result=40 04:38:04 Set A/D encoding result=40 04:38:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:04 Set channel filter=0.000000e+000 result=40 04:38:04 Config A/D Result=40 04:38:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:04 Get A/D filter: -9.255963e+061 result=40 04:38:04 Get A/D value=-858993460 result=40 04:38:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:04 Aux= 04:38:04 Message to Camera, serial 39663 queued 04:38:40 Received message from Master: op=PointingHead serial=39676 04:38:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:38:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:38:41 Point started: ret=0 04:38:41 point_skyscan result=0 04:38:42 Check angles 04:38:42 SkyScan query 04:38:42 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 04:38:42 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 04:38:42 Check angles 04:38:42 SkyScan query 04:38:43 SkyScan query done: ret=0 az=153.675<-10245 ze=-6.495<-12433 Statuses=0009 0008 04:38:43 Msec=750 True Az=153.675 Ze=-6.495 Az status=0009 Ze status=0008 04:38:43 Check angles 04:38:43 SkyScan query 04:38:44 SkyScan query done: ret=0 az=171.54<-11436 ze=-6.495<-12433 Statuses=0009 0008 04:38:44 Msec=1500 True Az=171.54 Ze=-6.495 Az status=0009 Ze status=0008 04:38:44 Check angles 04:38:44 SkyScan query 04:38:44 SkyScan query done: ret=0 az=175.98<-11732 ze=-6.495<-12433 Statuses=0008 0008 04:38:44 Msec=2250 True Az=175.98 Ze=-6.495 Az status=0008 Ze status=0008 04:38:44 Message to Master queued w/err=0: serial=39676 error=0 04:38:49 Received message from Master: op=Filter serial=39677 04:38:49 Color wheel filter change from 0 to 0 04:38:49 FLIGetFilterPos err=0 currentPosition=0 04:38:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:49 Filter is already there-color wheel unchanged 04:38:50 Received message from Master: op=Shutter serial=39678 04:38:50 Shutter LASER close 04:38:50 Received message from Camera: op=State serial=39680 04:38:50 GetSingleValue result=40 Value=cccccccc 04:38:50 SkyScan query 04:38:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:38:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:50 Parameters OK 04:38:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:50 Set A/D data flow result=40 04:38:50 Set A/D channel type result=40 04:38:50 Set A/D encoding result=40 04:38:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:50 Set channel filter=0.000000e+000 result=40 04:38:50 Config A/D Result=40 04:38:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:50 Get A/D filter: -9.255963e+061 result=40 04:38:50 Get A/D value=-858993460 result=40 04:38:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:50 Parameters OK 04:38:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:50 Set A/D data flow result=40 04:38:50 Set A/D channel type result=40 04:38:50 Set A/D encoding result=40 04:38:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:50 Set channel filter=0.000000e+000 result=40 04:38:50 Config A/D Result=40 04:38:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:50 Get A/D filter: -9.255963e+061 result=40 04:38:50 Get A/D value=-858993460 result=40 04:38:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:50 Aux= 04:38:50 Message to Camera, serial 39680 queued 04:39:27 Received message from Master: op=PointingHead serial=39693 04:39:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:39:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:39:27 Point started: ret=0 04:39:27 point_skyscan result=0 04:39:28 Check angles 04:39:28 SkyScan query 04:39:29 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 04:39:29 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 04:39:29 Check angles 04:39:29 SkyScan query 04:39:29 SkyScan query done: ret=0 az=135.18<-9012 ze=6.495<-11567 Statuses=0009 0008 04:39:29 Msec=750 True Az=135.18 Ze=6.495 Az status=0009 Ze status=0008 04:39:30 Check angles 04:39:30 SkyScan query 04:39:30 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 04:39:30 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 04:39:30 Check angles 04:39:30 SkyScan query 04:39:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:39:31 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:39:31 Message to Master queued w/err=0: serial=39693 error=0 04:39:36 Received message from Master: op=Filter serial=39694 04:39:36 Color wheel filter change from 0 to 0 04:39:36 FLIGetFilterPos err=0 currentPosition=0 04:39:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:36 Filter is already there-color wheel unchanged 04:39:36 Received message from Master: op=Shutter serial=39695 04:39:36 Shutter LASER close 04:39:36 Received message from Camera: op=State serial=39697 04:39:36 GetSingleValue result=40 Value=cccccccc 04:39:36 SkyScan query 04:39:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:39:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:37 Parameters OK 04:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:37 Set A/D data flow result=40 04:39:37 Set A/D channel type result=40 04:39:37 Set A/D encoding result=40 04:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:37 Set channel filter=0.000000e+000 result=40 04:39:37 Config A/D Result=40 04:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:37 Get A/D filter: -9.255963e+061 result=40 04:39:37 Get A/D value=-858993460 result=40 04:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:37 Parameters OK 04:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:37 Set A/D data flow result=40 04:39:37 Set A/D channel type result=40 04:39:37 Set A/D encoding result=40 04:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:37 Set channel filter=0.000000e+000 result=40 04:39:37 Config A/D Result=40 04:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:37 Get A/D filter: -9.255963e+061 result=40 04:39:37 Get A/D value=-858993460 result=40 04:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:37 Aux= 04:39:37 Message to Camera, serial 39697 queued 04:40:14 Received message from Master: op=PointingHead serial=39710 04:40:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:40:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:40:14 Point started: ret=0 04:40:14 point_skyscan result=0 04:40:15 Check angles 04:40:15 SkyScan query 04:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 04:40:15 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 04:40:15 Check angles 04:40:15 SkyScan query 04:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 04:40:16 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 04:40:16 Check angles 04:40:16 SkyScan query 04:40:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 04:40:17 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 04:40:17 Check angles 04:40:17 SkyScan query 04:40:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 04:40:17 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 04:40:18 Check angles 04:40:18 SkyScan query 04:40:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.265<-19151 Statuses=0008 0009 04:40:18 Msec=3000 True Az=112.995 Ze=-107.265 Az status=0008 Ze status=0009 04:40:18 Check angles 04:40:18 SkyScan query 04:40:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.22<-20548 Statuses=0008 0009 04:40:19 Msec=3750 True Az=112.995 Ze=-128.22 Az status=0008 Ze status=0009 04:40:19 Check angles 04:40:19 SkyScan query 04:40:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.175<-21945 Statuses=0008 0009 04:40:20 Msec=4500 True Az=112.995 Ze=-149.175 Az status=0008 Ze status=0009 04:40:20 Check angles 04:40:20 SkyScan query 04:40:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.115<-23341 Statuses=0008 0009 04:40:20 Msec=5250 True Az=112.995 Ze=-170.115 Az status=0008 Ze status=0009 04:40:21 Check angles 04:40:21 SkyScan query 04:40:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:40:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:40:21 Message to Master queued w/err=0: serial=39710 error=0 04:40:26 Received message from Master: op=Filter serial=39711 04:40:26 Color wheel filter change from 0 to 0 04:40:26 FLIGetFilterPos err=0 currentPosition=0 04:40:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:26 Filter is already there-color wheel unchanged 04:40:26 Received message from Master: op=Shutter serial=39712 04:40:26 Shutter LASER open 04:40:27 Received message from Camera: op=State serial=39714 04:40:27 GetSingleValue result=40 Value=cccccccc 04:40:27 SkyScan query 04:40:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:40:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:27 Parameters OK 04:40:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:27 Set A/D data flow result=40 04:40:27 Set A/D channel type result=40 04:40:27 Set A/D encoding result=40 04:40:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:27 Set channel filter=0.000000e+000 result=40 04:40:27 Config A/D Result=40 04:40:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:27 Get A/D filter: -9.255963e+061 result=40 04:40:27 Get A/D value=-858993460 result=40 04:40:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:27 Parameters OK 04:40:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:27 Set A/D data flow result=40 04:40:27 Set A/D channel type result=40 04:40:27 Set A/D encoding result=40 04:40:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:27 Set channel filter=0.000000e+000 result=40 04:40:27 Config A/D Result=40 04:40:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:27 Get A/D filter: -9.255963e+061 result=40 04:40:27 Get A/D value=-858993460 result=40 04:40:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:27 Aux= 04:40:27 Message to Camera, serial 39714 queued 04:40:36 Received message from Master: op=Shutter serial=39724 04:40:36 Shutter LASER close 04:40:36 Received message from Master: op=PointingHead serial=39728 04:40:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:40:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:40:36 Point started: ret=0 04:40:36 point_skyscan result=0 04:40:37 Check angles 04:40:37 SkyScan query 04:40:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.935<-21529 Statuses=0008 0009 04:40:38 Msec=0 True Az=112.995 Ze=-142.935 Az status=0008 Ze status=0009 04:40:38 Check angles 04:40:38 SkyScan query 04:40:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 04:40:38 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 04:40:39 Check angles 04:40:39 SkyScan query 04:40:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 04:40:39 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 04:40:39 Check angles 04:40:39 SkyScan query 04:40:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 04:40:40 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 04:40:40 Check angles 04:40:40 SkyScan query 04:40:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.16<-15944 Statuses=0008 0009 04:40:41 Msec=3000 True Az=112.995 Ze=-59.16 Az status=0008 Ze status=0009 04:40:41 Check angles 04:40:41 SkyScan query 04:40:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 04:40:41 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 04:40:42 Check angles 04:40:42 SkyScan query 04:40:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.205<-13147 Statuses=0008 0009 04:40:42 Msec=4500 True Az=112.995 Ze=-17.205 Az status=0008 Ze status=0009 04:40:42 Check angles 04:40:42 SkyScan query 04:40:43 SkyScan query done: ret=0 az=112.995<-7533 ze=3.75<-11750 Statuses=0008 0009 04:40:43 Msec=5250 True Az=112.995 Ze=3.75 Az status=0008 Ze status=0009 04:40:43 Check angles 04:40:43 SkyScan query 04:40:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:40:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:40:44 Message to Master queued w/err=0: serial=39728 error=0 04:40:49 Received message from Master: op=Filter serial=39729 04:40:49 Color wheel filter change from 0 to 0 04:40:49 FLIGetFilterPos err=0 currentPosition=0 04:40:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:49 Filter is already there-color wheel unchanged 04:40:49 Received message from Master: op=Shutter serial=39730 04:40:49 Shutter LASER close 04:40:49 Received message from Camera: op=State serial=39732 04:40:49 GetSingleValue result=40 Value=cccccccc 04:40:49 SkyScan query 04:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:40:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:50 Parameters OK 04:40:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:50 Set A/D data flow result=40 04:40:50 Set A/D channel type result=40 04:40:50 Set A/D encoding result=40 04:40:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:50 Set channel filter=0.000000e+000 result=40 04:40:50 Config A/D Result=40 04:40:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:50 Get A/D filter: -9.255963e+061 result=40 04:40:50 Get A/D value=-858993460 result=40 04:40:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:50 Parameters OK 04:40:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:50 Set A/D data flow result=40 04:40:50 Set A/D channel type result=40 04:40:50 Set A/D encoding result=40 04:40:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:50 Set channel filter=0.000000e+000 result=40 04:40:50 Config A/D Result=40 04:40:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:50 Get A/D filter: -9.255963e+061 result=40 04:40:50 Get A/D value=-858993460 result=40 04:40:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:50 Aux= 04:40:50 Message to Camera, serial 39732 queued 04:41:26 Received message from Master: op=PointingHead serial=39745 04:41:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:41:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:41:27 Point started: ret=0 04:41:27 point_skyscan result=0 04:41:27 Check angles 04:41:27 SkyScan query 04:41:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:41:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:41:28 Message to Master queued w/err=0: serial=39745 error=0 04:41:33 Received message from Master: op=Filter serial=39746 04:41:33 Color wheel filter change from 0 to 0 04:41:33 FLIGetFilterPos err=0 currentPosition=0 04:41:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:33 Filter is already there-color wheel unchanged 04:41:33 Received message from Master: op=Shutter serial=39747 04:41:33 Shutter LASER close 04:41:33 Received message from Camera: op=State serial=39749 04:41:33 GetSingleValue result=40 Value=cccccccc 04:41:33 SkyScan query 04:41:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:41:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:34 Parameters OK 04:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:34 Set A/D data flow result=40 04:41:34 Set A/D channel type result=40 04:41:34 Set A/D encoding result=40 04:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:34 Set channel filter=0.000000e+000 result=40 04:41:34 Config A/D Result=40 04:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:34 Get A/D filter: -9.255963e+061 result=40 04:41:34 Get A/D value=-858993460 result=40 04:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:34 Parameters OK 04:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:34 Set A/D data flow result=40 04:41:34 Set A/D channel type result=40 04:41:34 Set A/D encoding result=40 04:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:34 Set channel filter=0.000000e+000 result=40 04:41:34 Config A/D Result=40 04:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:34 Get A/D filter: -9.255963e+061 result=40 04:41:34 Get A/D value=-858993460 result=40 04:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:34 Aux= 04:41:34 Message to Camera, serial 39749 queued 04:42:10 Received message from Master: op=PointingHead serial=39761 04:42:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:42:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:42:10 Point started: ret=0 04:42:10 point_skyscan result=0 04:42:11 Check angles 04:42:11 SkyScan query 04:42:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:42:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:42:11 Message to Master queued w/err=0: serial=39761 error=0 04:42:16 Received message from Master: op=Filter serial=39762 04:42:16 Color wheel filter change from 0 to 0 04:42:16 FLIGetFilterPos err=0 currentPosition=0 04:42:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:16 Filter is already there-color wheel unchanged 04:42:17 Received message from Master: op=Shutter serial=39763 04:42:17 Shutter LASER close 04:42:17 Received message from Camera: op=State serial=39765 04:42:17 GetSingleValue result=40 Value=cccccccc 04:42:17 SkyScan query 04:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:42:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:17 Parameters OK 04:42:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:17 Set A/D data flow result=40 04:42:17 Set A/D channel type result=40 04:42:17 Set A/D encoding result=40 04:42:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:17 Set channel filter=0.000000e+000 result=40 04:42:17 Config A/D Result=40 04:42:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:17 Get A/D filter: -9.255963e+061 result=40 04:42:17 Get A/D value=-858993460 result=40 04:42:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:17 Parameters OK 04:42:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:17 Set A/D data flow result=40 04:42:17 Set A/D channel type result=40 04:42:17 Set A/D encoding result=40 04:42:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:17 Set channel filter=0.000000e+000 result=40 04:42:17 Config A/D Result=40 04:42:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:17 Get A/D filter: -9.255963e+061 result=40 04:42:17 Get A/D value=-858993460 result=40 04:42:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:17 Aux= 04:42:17 Message to Camera, serial 39765 queued 04:42:54 Received message from Master: op=PointingHead serial=39778 04:42:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:42:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:42:54 Point started: ret=0 04:42:54 point_skyscan result=0 04:42:55 Check angles 04:42:55 SkyScan query 04:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:42:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:42:56 Message to Master queued w/err=0: serial=39778 error=0 04:43:01 Received message from Master: op=Filter serial=39779 04:43:01 Color wheel filter change from 0 to 0 04:43:01 FLIGetFilterPos err=0 currentPosition=0 04:43:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:01 Filter is already there-color wheel unchanged 04:43:01 Received message from Master: op=Shutter serial=39780 04:43:01 Shutter LASER close 04:43:01 Received message from Camera: op=State serial=39782 04:43:01 GetSingleValue result=40 Value=cccccccc 04:43:01 SkyScan query 04:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:43:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:01 Parameters OK 04:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:01 Set A/D data flow result=40 04:43:01 Set A/D channel type result=40 04:43:01 Set A/D encoding result=40 04:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:01 Set channel filter=0.000000e+000 result=40 04:43:01 Config A/D Result=40 04:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:01 Get A/D filter: -9.255963e+061 result=40 04:43:01 Get A/D value=-858993460 result=40 04:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:01 Parameters OK 04:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:01 Set A/D data flow result=40 04:43:01 Set A/D channel type result=40 04:43:01 Set A/D encoding result=40 04:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:01 Set channel filter=0.000000e+000 result=40 04:43:01 Config A/D Result=40 04:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:01 Get A/D filter: -9.255963e+061 result=40 04:43:01 Get A/D value=-858993460 result=40 04:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:01 Aux= 04:43:01 Message to Camera, serial 39782 queued 04:43:38 Received message from Master: op=PointingHead serial=39795 04:43:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:43:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:43:39 Point started: ret=0 04:43:39 point_skyscan result=0 04:43:39 Check angles 04:43:39 SkyScan query 04:43:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 04:43:40 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 04:43:40 Check angles 04:43:40 SkyScan query 04:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 04:43:41 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 04:43:41 Check angles 04:43:41 SkyScan query 04:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 04:43:42 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 04:43:42 Check angles 04:43:42 SkyScan query 04:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 04:43:42 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 04:43:42 Check angles 04:43:42 SkyScan query 04:43:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 04:43:43 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 04:43:43 Check angles 04:43:43 SkyScan query 04:43:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 04:43:44 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 04:43:44 Check angles 04:43:44 SkyScan query 04:43:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.31<-21954 Statuses=0008 0009 04:43:45 Msec=4500 True Az=112.995 Ze=-149.31 Az status=0008 Ze status=0009 04:43:45 Check angles 04:43:45 SkyScan query 04:43:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 04:43:45 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 04:43:45 Check angles 04:43:45 SkyScan query 04:43:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:43:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:43:46 Message to Master queued w/err=0: serial=39795 error=0 [UTC 2019-3-1 04:43:50] 04:43:51 Received message from Master: op=Filter serial=39796 04:43:51 Color wheel filter change from 0 to 0 04:43:51 FLIGetFilterPos err=0 currentPosition=0 04:43:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:51 Filter is already there-color wheel unchanged 04:43:51 Received message from Master: op=Shutter serial=39797 04:43:51 Shutter LASER open 04:43:51 Received message from Camera: op=State serial=39799 04:43:51 GetSingleValue result=40 Value=cccccccc 04:43:51 SkyScan query 04:43:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:43:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:52 Parameters OK 04:43:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:52 Set A/D data flow result=40 04:43:52 Set A/D channel type result=40 04:43:52 Set A/D encoding result=40 04:43:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:52 Set channel filter=0.000000e+000 result=40 04:43:52 Config A/D Result=40 04:43:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:52 Get A/D filter: -9.255963e+061 result=40 04:43:52 Get A/D value=-858993460 result=40 04:43:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:52 Parameters OK 04:43:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:52 Set A/D data flow result=40 04:43:52 Set A/D channel type result=40 04:43:52 Set A/D encoding result=40 04:43:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:52 Set channel filter=0.000000e+000 result=40 04:43:52 Config A/D Result=40 04:43:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:52 Get A/D filter: -9.255963e+061 result=40 04:43:52 Get A/D value=-858993460 result=40 04:43:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:52 Aux= 04:43:52 Message to Camera, serial 39799 queued 04:44:00 Received message from Master: op=Shutter serial=39809 04:44:00 Shutter LASER close 04:44:01 Received message from Master: op=PointingHead serial=39813 04:44:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:44:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:44:01 Point started: ret=0 04:44:01 point_skyscan result=0 04:44:02 Check angles 04:44:02 SkyScan query 04:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 04:44:03 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 04:44:03 Check angles 04:44:03 SkyScan query 04:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.31<-20154 Statuses=0008 0009 04:44:03 Msec=750 True Az=112.995 Ze=-122.31 Az status=0008 Ze status=0009 04:44:04 Check angles 04:44:04 SkyScan query 04:44:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 04:44:04 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 04:44:04 Check angles 04:44:04 SkyScan query 04:44:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.4<-17360 Statuses=0008 0009 04:44:05 Msec=2250 True Az=112.995 Ze=-80.4 Az status=0008 Ze status=0009 04:44:05 Check angles 04:44:05 SkyScan query 04:44:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.445<-15963 Statuses=0008 0009 04:44:06 Msec=3000 True Az=112.995 Ze=-59.445 Az status=0008 Ze status=0009 04:44:06 Check angles 04:44:06 SkyScan query 04:44:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.475<-14565 Statuses=0008 0009 04:44:06 Msec=3750 True Az=112.995 Ze=-38.475 Az status=0008 Ze status=0009 04:44:07 Check angles 04:44:07 SkyScan query 04:44:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.52<-13168 Statuses=0008 0009 04:44:07 Msec=4500 True Az=112.995 Ze=-17.52 Az status=0008 Ze status=0009 04:44:07 Check angles 04:44:07 SkyScan query 04:44:08 SkyScan query done: ret=0 az=112.995<-7533 ze=3.87<-11742 Statuses=0008 0009 04:44:08 Msec=5250 True Az=112.995 Ze=3.87 Az status=0008 Ze status=0009 04:44:08 Check angles 04:44:08 SkyScan query 04:44:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:44:09 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:44:09 Message to Master queued w/err=0: serial=39813 error=0 04:44:14 Received message from Master: op=Filter serial=39814 04:44:14 Color wheel filter change from 0 to 0 04:44:14 FLIGetFilterPos err=0 currentPosition=0 04:44:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:14 Filter is already there-color wheel unchanged 04:44:14 Received message from Master: op=Shutter serial=39815 04:44:14 Shutter LASER close 04:44:14 Received message from Camera: op=State serial=39817 04:44:14 GetSingleValue result=40 Value=cccccccc 04:44:14 SkyScan query 04:44:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:15 Parameters OK 04:44:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:15 Set A/D data flow result=40 04:44:15 Set A/D channel type result=40 04:44:15 Set A/D encoding result=40 04:44:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:15 Set channel filter=0.000000e+000 result=40 04:44:15 Config A/D Result=40 04:44:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:15 Get A/D filter: -9.255963e+061 result=40 04:44:15 Get A/D value=-858993460 result=40 04:44:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:15 Parameters OK 04:44:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:15 Set A/D data flow result=40 04:44:15 Set A/D channel type result=40 04:44:15 Set A/D encoding result=40 04:44:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:15 Set channel filter=0.000000e+000 result=40 04:44:15 Config A/D Result=40 04:44:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:15 Get A/D filter: -9.255963e+061 result=40 04:44:15 Get A/D value=-858993460 result=40 04:44:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:15 Aux= 04:44:15 Message to Camera, serial 39817 queued 04:44:51 Received message from Master: op=PointingHead serial=39830 04:44:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:44:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:44:52 Point started: ret=0 04:44:52 point_skyscan result=0 04:44:53 Check angles 04:44:53 SkyScan query 04:44:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:44:53 Message to Master queued w/err=0: serial=39830 error=0 04:44:58 Received message from Master: op=Filter serial=39831 04:44:58 Color wheel filter change from 0 to 0 04:44:58 FLIGetFilterPos err=0 currentPosition=0 04:44:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:58 Filter is already there-color wheel unchanged 04:44:58 Received message from Master: op=Shutter serial=39832 04:44:58 Shutter LASER close 04:44:58 Received message from Camera: op=State serial=39834 04:44:58 GetSingleValue result=40 Value=cccccccc 04:44:58 SkyScan query 04:44:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:59 Parameters OK 04:44:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:59 Set A/D data flow result=40 04:44:59 Set A/D channel type result=40 04:44:59 Set A/D encoding result=40 04:44:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:59 Set channel filter=0.000000e+000 result=40 04:44:59 Config A/D Result=40 04:44:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:59 Get A/D filter: -9.255963e+061 result=40 04:44:59 Get A/D value=-858993460 result=40 04:44:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:59 Parameters OK 04:44:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:59 Set A/D data flow result=40 04:44:59 Set A/D channel type result=40 04:44:59 Set A/D encoding result=40 04:44:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:59 Set channel filter=0.000000e+000 result=40 04:44:59 Config A/D Result=40 04:44:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:59 Get A/D filter: -9.255963e+061 result=40 04:44:59 Get A/D value=-858993460 result=40 04:44:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:59 Aux= 04:44:59 Message to Camera, serial 39834 queued 04:45:35 Received message from Master: op=PointingHead serial=39846 04:45:35 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:45:35 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:45:35 Point started: ret=0 04:45:35 point_skyscan result=0 04:45:36 Check angles 04:45:36 SkyScan query 04:45:36 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.495<-12433 Statuses=0009 0008 04:45:36 Msec=0 True Az=135.765 Ze=-6.495 Az status=0009 Ze status=0008 04:45:37 Check angles 04:45:37 SkyScan query 04:45:37 SkyScan query done: ret=0 az=153.33<-10222 ze=-6.48<-12432 Statuses=0009 0008 04:45:37 Msec=750 True Az=153.33 Ze=-6.48 Az status=0009 Ze status=0008 04:45:37 Check angles 04:45:37 SkyScan query 04:45:38 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.48<-12432 Statuses=0009 0008 04:45:38 Msec=1500 True Az=171.21 Ze=-6.48 Az status=0009 Ze status=0008 04:45:38 Check angles 04:45:38 SkyScan query 04:45:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:45:39 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 04:45:39 Message to Master queued w/err=0: serial=39846 error=0 04:45:44 Received message from Master: op=Filter serial=39847 04:45:44 Color wheel filter change from 0 to 0 04:45:44 FLIGetFilterPos err=0 currentPosition=0 04:45:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:44 Filter is already there-color wheel unchanged 04:45:44 Received message from Master: op=Shutter serial=39848 04:45:44 Shutter LASER close 04:45:44 Received message from Camera: op=State serial=39850 04:45:44 GetSingleValue result=40 Value=cccccccc 04:45:44 SkyScan query 04:45:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:45:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:44 Parameters OK 04:45:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:44 Set A/D data flow result=40 04:45:44 Set A/D channel type result=40 04:45:44 Set A/D encoding result=40 04:45:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:44 Set channel filter=0.000000e+000 result=40 04:45:44 Config A/D Result=40 04:45:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:44 Get A/D filter: -9.255963e+061 result=40 04:45:44 Get A/D value=-858993460 result=40 04:45:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:44 Parameters OK 04:45:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:44 Set A/D data flow result=40 04:45:44 Set A/D channel type result=40 04:45:44 Set A/D encoding result=40 04:45:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:44 Set channel filter=0.000000e+000 result=40 04:45:44 Config A/D Result=40 04:45:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:44 Get A/D filter: -9.255963e+061 result=40 04:45:44 Get A/D value=-858993460 result=40 04:45:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:44 Aux= 04:45:44 Message to Camera, serial 39850 queued 04:46:21 Received message from Master: op=PointingHead serial=39863 04:46:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:46:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:46:22 Point started: ret=0 04:46:22 point_skyscan result=0 04:46:22 Check angles 04:46:22 SkyScan query 04:46:23 SkyScan query done: ret=0 az=153.225<-10215 ze=6.51<-11566 Statuses=0009 0008 04:46:23 Msec=0 True Az=153.225 Ze=6.51 Az status=0009 Ze status=0008 04:46:23 Check angles 04:46:23 SkyScan query 04:46:24 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 04:46:24 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 04:46:24 Check angles 04:46:24 SkyScan query 04:46:25 SkyScan query done: ret=0 az=117.915<-7861 ze=6.495<-11567 Statuses=0009 0008 04:46:25 Msec=1500 True Az=117.915 Ze=6.495 Az status=0009 Ze status=0008 04:46:25 Check angles 04:46:25 SkyScan query 04:46:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:46:25 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:46:25 Message to Master queued w/err=0: serial=39863 error=0 04:46:30 Received message from Master: op=Filter serial=39864 04:46:30 Color wheel filter change from 0 to 0 04:46:30 FLIGetFilterPos err=0 currentPosition=0 04:46:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:30 Filter is already there-color wheel unchanged 04:46:31 Received message from Master: op=Shutter serial=39865 04:46:31 Shutter LASER close 04:46:31 Received message from Camera: op=State serial=39867 04:46:31 GetSingleValue result=40 Value=cccccccc 04:46:31 SkyScan query 04:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:46:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:31 Parameters OK 04:46:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:31 Set A/D data flow result=40 04:46:31 Set A/D channel type result=40 04:46:31 Set A/D encoding result=40 04:46:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:31 Set channel filter=0.000000e+000 result=40 04:46:31 Config A/D Result=40 04:46:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:31 Get A/D filter: -9.255963e+061 result=40 04:46:31 Get A/D value=-858993460 result=40 04:46:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:31 Parameters OK 04:46:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:31 Set A/D data flow result=40 04:46:31 Set A/D channel type result=40 04:46:31 Set A/D encoding result=40 04:46:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:31 Set channel filter=0.000000e+000 result=40 04:46:31 Config A/D Result=40 04:46:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:31 Get A/D filter: -9.255963e+061 result=40 04:46:31 Get A/D value=-858993460 result=40 04:46:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:31 Aux= 04:46:31 Message to Camera, serial 39867 queued 04:47:08 Received message from Master: op=PointingHead serial=39880 04:47:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:47:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:47:08 Point started: ret=0 04:47:08 point_skyscan result=0 04:47:09 Check angles 04:47:09 SkyScan query 04:47:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 04:47:10 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 04:47:10 Check angles 04:47:10 SkyScan query 04:47:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 04:47:10 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 04:47:11 Check angles 04:47:11 SkyScan query 04:47:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 04:47:11 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 04:47:11 Check angles 04:47:11 SkyScan query 04:47:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 04:47:12 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 04:47:12 Check angles 04:47:12 SkyScan query 04:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.31<-19154 Statuses=0008 0009 04:47:13 Msec=3000 True Az=112.995 Ze=-107.31 Az status=0008 Ze status=0009 04:47:13 Check angles 04:47:13 SkyScan query 04:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.25<-20550 Statuses=0008 0009 04:47:13 Msec=3750 True Az=112.995 Ze=-128.25 Az status=0008 Ze status=0009 04:47:14 Check angles 04:47:14 SkyScan query 04:47:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 04:47:14 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 04:47:14 Check angles 04:47:14 SkyScan query 04:47:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 04:47:15 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 04:47:15 Check angles 04:47:15 SkyScan query 04:47:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:47:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:47:16 Message to Master queued w/err=0: serial=39880 error=0 04:47:21 Received message from Master: op=Filter serial=39881 04:47:21 Color wheel filter change from 0 to 0 04:47:21 FLIGetFilterPos err=0 currentPosition=0 04:47:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:21 Filter is already there-color wheel unchanged 04:47:21 Received message from Master: op=Shutter serial=39882 04:47:21 Shutter LASER open 04:47:21 Received message from Camera: op=State serial=39884 04:47:21 GetSingleValue result=40 Value=cccccccc 04:47:21 SkyScan query 04:47:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:47:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:22 Parameters OK 04:47:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:22 Set A/D data flow result=40 04:47:22 Set A/D channel type result=40 04:47:22 Set A/D encoding result=40 04:47:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:22 Set channel filter=0.000000e+000 result=40 04:47:22 Config A/D Result=40 04:47:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:22 Get A/D filter: -9.255963e+061 result=40 04:47:22 Get A/D value=-858993460 result=40 04:47:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:22 Parameters OK 04:47:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:22 Set A/D data flow result=40 04:47:22 Set A/D channel type result=40 04:47:22 Set A/D encoding result=40 04:47:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:22 Set channel filter=0.000000e+000 result=40 04:47:22 Config A/D Result=40 04:47:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:22 Get A/D filter: -9.255963e+061 result=40 04:47:22 Get A/D value=-858993460 result=40 04:47:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:22 Aux= 04:47:22 Message to Camera, serial 39884 queued 04:47:30 Received message from Master: op=Shutter serial=39894 04:47:30 Shutter LASER close 04:47:30 Received message from Master: op=PointingHead serial=39898 04:47:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:47:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:47:31 Point started: ret=0 04:47:31 point_skyscan result=0 04:47:32 Check angles 04:47:32 SkyScan query 04:47:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 04:47:32 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 04:47:32 Check angles 04:47:32 SkyScan query 04:47:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 04:47:33 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 04:47:33 Check angles 04:47:33 SkyScan query 04:47:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 04:47:34 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 04:47:34 Check angles 04:47:34 SkyScan query 04:47:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.995<-17333 Statuses=0008 0009 04:47:34 Msec=2250 True Az=112.995 Ze=-79.995 Az status=0008 Ze status=0009 04:47:35 Check angles 04:47:35 SkyScan query 04:47:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 04:47:35 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 04:47:35 Check angles 04:47:35 SkyScan query 04:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 04:47:36 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 04:47:36 Check angles 04:47:36 SkyScan query 04:47:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.68<-13112 Statuses=0008 0009 04:47:37 Msec=4500 True Az=112.995 Ze=-16.68 Az status=0008 Ze status=0009 04:47:37 Check angles 04:47:37 SkyScan query 04:47:37 SkyScan query done: ret=0 az=112.995<-7533 ze=4.245<-11717 Statuses=0008 0009 04:47:37 Msec=5250 True Az=112.995 Ze=4.245 Az status=0008 Ze status=0009 04:47:38 Check angles 04:47:38 SkyScan query 04:47:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:47:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:47:38 Message to Master queued w/err=0: serial=39898 error=0 04:47:43 Received message from Master: op=Filter serial=39899 04:47:43 Color wheel filter change from 0 to 0 04:47:43 FLIGetFilterPos err=0 currentPosition=0 04:47:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:43 Filter is already there-color wheel unchanged 04:47:43 Received message from Master: op=Shutter serial=39900 04:47:43 Shutter LASER close 04:47:44 Received message from Camera: op=State serial=39902 04:47:44 GetSingleValue result=40 Value=cccccccc 04:47:44 SkyScan query 04:47:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:47:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:44 Parameters OK 04:47:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:44 Set A/D data flow result=40 04:47:44 Set A/D channel type result=40 04:47:44 Set A/D encoding result=40 04:47:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:44 Set channel filter=0.000000e+000 result=40 04:47:44 Config A/D Result=40 04:47:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:44 Get A/D filter: -9.255963e+061 result=40 04:47:44 Get A/D value=-858993460 result=40 04:47:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:44 Parameters OK 04:47:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:44 Set A/D data flow result=40 04:47:44 Set A/D channel type result=40 04:47:44 Set A/D encoding result=40 04:47:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:44 Set channel filter=0.000000e+000 result=40 04:47:44 Config A/D Result=40 04:47:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:44 Get A/D filter: -9.255963e+061 result=40 04:47:44 Get A/D value=-858993460 result=40 04:47:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:44 Aux= 04:47:44 Message to Camera, serial 39902 queued 04:48:21 Received message from Master: op=PointingHead serial=39915 04:48:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:48:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:48:21 Point started: ret=0 04:48:21 point_skyscan result=0 04:48:22 Check angles 04:48:22 SkyScan query 04:48:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:48:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:48:23 Message to Master queued w/err=0: serial=39915 error=0 04:48:28 Received message from Master: op=Filter serial=39916 04:48:28 Color wheel filter change from 0 to 0 04:48:28 FLIGetFilterPos err=0 currentPosition=0 04:48:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:28 Filter is already there-color wheel unchanged 04:48:28 Received message from Master: op=Shutter serial=39917 04:48:28 Shutter LASER close 04:48:28 Received message from Camera: op=State serial=39919 04:48:28 GetSingleValue result=40 Value=cccccccc 04:48:28 SkyScan query 04:48:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:48:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:28 Parameters OK 04:48:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:28 Set A/D data flow result=40 04:48:28 Set A/D channel type result=40 04:48:28 Set A/D encoding result=40 04:48:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:28 Set channel filter=0.000000e+000 result=40 04:48:28 Config A/D Result=40 04:48:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:28 Get A/D filter: -9.255963e+061 result=40 04:48:28 Get A/D value=-858993460 result=40 04:48:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:28 Parameters OK 04:48:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:28 Set A/D data flow result=40 04:48:28 Set A/D channel type result=40 04:48:28 Set A/D encoding result=40 04:48:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:28 Set channel filter=0.000000e+000 result=40 04:48:28 Config A/D Result=40 04:48:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:28 Get A/D filter: -9.255963e+061 result=40 04:48:28 Get A/D value=-858993460 result=40 04:48:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:28 Aux= 04:48:28 Message to Camera, serial 39919 queued 04:49:05 Received message from Master: op=PointingHead serial=39932 04:49:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:49:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:49:06 Point started: ret=0 04:49:06 point_skyscan result=0 04:49:06 Check angles 04:49:06 SkyScan query 04:49:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:49:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:49:07 Message to Master queued w/err=0: serial=39932 error=0 04:49:12 Received message from Master: op=Filter serial=39933 04:49:12 Color wheel filter change from 0 to 0 04:49:12 FLIGetFilterPos err=0 currentPosition=0 04:49:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:12 Filter is already there-color wheel unchanged 04:49:12 Received message from Master: op=Shutter serial=39934 04:49:12 Shutter LASER close 04:49:12 Received message from Camera: op=State serial=39936 04:49:12 GetSingleValue result=40 Value=cccccccc 04:49:12 SkyScan query 04:49:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:49:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:13 Parameters OK 04:49:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:13 Set A/D data flow result=40 04:49:13 Set A/D channel type result=40 04:49:13 Set A/D encoding result=40 04:49:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:13 Set channel filter=0.000000e+000 result=40 04:49:13 Config A/D Result=40 04:49:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:13 Get A/D filter: -9.255963e+061 result=40 04:49:13 Get A/D value=-858993460 result=40 04:49:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:13 Parameters OK 04:49:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:13 Set A/D data flow result=40 04:49:13 Set A/D channel type result=40 04:49:13 Set A/D encoding result=40 04:49:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:13 Set channel filter=0.000000e+000 result=40 04:49:13 Config A/D Result=40 04:49:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:13 Get A/D filter: -9.255963e+061 result=40 04:49:13 Get A/D value=-858993460 result=40 04:49:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:13 Aux= 04:49:13 Message to Camera, serial 39936 queued 04:49:50 Received message from Master: op=PointingHead serial=39949 04:49:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:49:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:49:50 Point started: ret=0 04:49:50 point_skyscan result=0 04:49:51 Check angles 04:49:51 SkyScan query 04:49:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:49:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:49:51 Message to Master queued w/err=0: serial=39949 error=0 04:49:56 Received message from Master: op=Filter serial=39950 04:49:56 Color wheel filter change from 0 to 0 04:49:56 FLIGetFilterPos err=0 currentPosition=0 04:49:56 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:56 Filter is already there-color wheel unchanged 04:49:56 Received message from Master: op=Shutter serial=39951 04:49:56 Shutter LASER close 04:49:56 Received message from Camera: op=State serial=39953 04:49:56 GetSingleValue result=40 Value=cccccccc 04:49:56 SkyScan query 04:49:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:49:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:57 Parameters OK 04:49:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:57 Set A/D data flow result=40 04:49:57 Set A/D channel type result=40 04:49:57 Set A/D encoding result=40 04:49:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:57 Set channel filter=0.000000e+000 result=40 04:49:57 Config A/D Result=40 04:49:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:57 Get A/D filter: -9.255963e+061 result=40 04:49:57 Get A/D value=-858993460 result=40 04:49:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:57 Parameters OK 04:49:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:57 Set A/D data flow result=40 04:49:57 Set A/D channel type result=40 04:49:57 Set A/D encoding result=40 04:49:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:57 Set channel filter=0.000000e+000 result=40 04:49:57 Config A/D Result=40 04:49:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:57 Get A/D filter: -9.255963e+061 result=40 04:49:57 Get A/D value=-858993460 result=40 04:49:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:57 Aux= 04:49:57 Message to Camera, serial 39953 queued 04:50:34 Received message from Master: op=PointingHead serial=39966 04:50:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:50:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:50:34 Point started: ret=0 04:50:34 point_skyscan result=0 04:50:35 Check angles 04:50:35 SkyScan query 04:50:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 04:50:35 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 04:50:36 Check angles 04:50:36 SkyScan query 04:50:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.98<-14932 Statuses=0008 0009 04:50:36 Msec=750 True Az=112.995 Ze=-43.98 Az status=0008 Ze status=0009 04:50:36 Check angles 04:50:36 SkyScan query 04:50:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 04:50:37 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 04:50:37 Check angles 04:50:37 SkyScan query 04:50:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.355<-17757 Statuses=0008 0009 04:50:38 Msec=2250 True Az=112.995 Ze=-86.355 Az status=0008 Ze status=0009 04:50:38 Check angles 04:50:38 SkyScan query 04:50:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 04:50:38 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 04:50:39 Check angles 04:50:39 SkyScan query 04:50:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 04:50:39 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 04:50:39 Check angles 04:50:39 SkyScan query 04:50:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 04:50:40 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 04:50:40 Check angles 04:50:40 SkyScan query 04:50:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.55<-23370 Statuses=0008 0009 04:50:41 Msec=5250 True Az=112.995 Ze=-170.55 Az status=0008 Ze status=0009 04:50:41 Check angles 04:50:41 SkyScan query 04:50:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:50:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:50:42 Message to Master queued w/err=0: serial=39966 error=0 04:50:47 Received message from Master: op=Filter serial=39967 04:50:47 Color wheel filter change from 0 to 0 04:50:47 FLIGetFilterPos err=0 currentPosition=0 04:50:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:47 Filter is already there-color wheel unchanged 04:50:47 Received message from Master: op=Shutter serial=39968 04:50:47 Shutter LASER open 04:50:47 Received message from Camera: op=State serial=39970 04:50:47 GetSingleValue result=40 Value=cccccccc 04:50:47 SkyScan query 04:50:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:50:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:47 Parameters OK 04:50:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:47 Set A/D data flow result=40 04:50:47 Set A/D channel type result=40 04:50:47 Set A/D encoding result=40 04:50:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:47 Set channel filter=0.000000e+000 result=40 04:50:47 Config A/D Result=40 04:50:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:47 Get A/D filter: -9.255963e+061 result=40 04:50:47 Get A/D value=-858993460 result=40 04:50:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:47 Parameters OK 04:50:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:47 Set A/D data flow result=40 04:50:47 Set A/D channel type result=40 04:50:47 Set A/D encoding result=40 04:50:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:47 Set channel filter=0.000000e+000 result=40 04:50:47 Config A/D Result=40 04:50:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:47 Get A/D filter: -9.255963e+061 result=40 04:50:47 Get A/D value=-858993460 result=40 04:50:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:47 Aux= 04:50:47 Message to Camera, serial 39970 queued 04:50:56 Received message from Master: op=Shutter serial=39980 04:50:56 Shutter LASER close 04:50:57 Received message from Master: op=PointingHead serial=39984 04:50:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:50:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:50:57 Point started: ret=0 04:50:57 point_skyscan result=0 04:50:58 Check angles 04:50:58 SkyScan query 04:50:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 04:50:58 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 04:50:58 Check angles 04:50:58 SkyScan query 04:50:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.295<-20153 Statuses=0008 0009 04:50:59 Msec=750 True Az=112.995 Ze=-122.295 Az status=0008 Ze status=0009 04:50:59 Check angles 04:50:59 SkyScan query 04:51:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.34<-18756 Statuses=0008 0009 04:51:00 Msec=1500 True Az=112.995 Ze=-101.34 Az status=0008 Ze status=0009 04:51:00 Check angles 04:51:00 SkyScan query 04:51:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.385<-17359 Statuses=0008 0009 04:51:00 Msec=2250 True Az=112.995 Ze=-80.385 Az status=0008 Ze status=0009 04:51:01 Check angles 04:51:01 SkyScan query 04:51:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.43<-15962 Statuses=0008 0009 04:51:01 Msec=3000 True Az=112.995 Ze=-59.43 Az status=0008 Ze status=0009 04:51:01 Check angles 04:51:01 SkyScan query 04:51:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.46<-14564 Statuses=0008 0009 04:51:02 Msec=3750 True Az=112.995 Ze=-38.46 Az status=0008 Ze status=0009 04:51:02 Check angles 04:51:02 SkyScan query 04:51:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.505<-13167 Statuses=0008 0009 04:51:03 Msec=4500 True Az=112.995 Ze=-17.505 Az status=0008 Ze status=0009 04:51:03 Check angles 04:51:03 SkyScan query 04:51:03 SkyScan query done: ret=0 az=112.995<-7533 ze=3.45<-11770 Statuses=0008 0009 04:51:03 Msec=5250 True Az=112.995 Ze=3.45 Az status=0008 Ze status=0009 04:51:04 Check angles 04:51:04 SkyScan query 04:51:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:51:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:51:04 Message to Master queued w/err=0: serial=39984 error=0 04:51:09 Received message from Master: op=Filter serial=39985 04:51:09 Color wheel filter change from 0 to 0 04:51:09 FLIGetFilterPos err=0 currentPosition=0 04:51:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:09 Filter is already there-color wheel unchanged 04:51:09 Received message from Master: op=Shutter serial=39986 04:51:09 Shutter LASER close 04:51:10 Received message from Camera: op=State serial=39988 04:51:10 GetSingleValue result=40 Value=cccccccc 04:51:10 SkyScan query 04:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:10 Parameters OK 04:51:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:10 Set A/D data flow result=40 04:51:10 Set A/D channel type result=40 04:51:10 Set A/D encoding result=40 04:51:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:10 Set channel filter=0.000000e+000 result=40 04:51:10 Config A/D Result=40 04:51:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:10 Get A/D filter: -9.255963e+061 result=40 04:51:10 Get A/D value=-858993460 result=40 04:51:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:10 Parameters OK 04:51:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:10 Set A/D data flow result=40 04:51:10 Set A/D channel type result=40 04:51:10 Set A/D encoding result=40 04:51:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:10 Set channel filter=0.000000e+000 result=40 04:51:10 Config A/D Result=40 04:51:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:10 Get A/D filter: -9.255963e+061 result=40 04:51:10 Get A/D value=-858993460 result=40 04:51:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:10 Aux= 04:51:10 Message to Camera, serial 39988 queued 04:51:47 Received message from Master: op=PointingHead serial=40001 04:51:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:51:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:51:47 Point started: ret=0 04:51:47 point_skyscan result=0 04:51:48 Check angles 04:51:48 SkyScan query 04:51:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:51:49 Message to Master queued w/err=0: serial=40001 error=0 04:51:54 Received message from Master: op=Filter serial=40002 04:51:54 Color wheel filter change from 0 to 0 04:51:54 FLIGetFilterPos err=0 currentPosition=0 04:51:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:54 Filter is already there-color wheel unchanged 04:51:54 Received message from Master: op=Shutter serial=40003 04:51:54 Shutter LASER close 04:51:54 Received message from Camera: op=State serial=40005 04:51:54 GetSingleValue result=40 Value=cccccccc 04:51:54 SkyScan query 04:51:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:54 Parameters OK 04:51:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:54 Set A/D data flow result=40 04:51:54 Set A/D channel type result=40 04:51:54 Set A/D encoding result=40 04:51:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:54 Set channel filter=0.000000e+000 result=40 04:51:54 Config A/D Result=40 04:51:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:54 Get A/D filter: -9.255963e+061 result=40 04:51:54 Get A/D value=-858993460 result=40 04:51:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:54 Parameters OK 04:51:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:54 Set A/D data flow result=40 04:51:54 Set A/D channel type result=40 04:51:54 Set A/D encoding result=40 04:51:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:54 Set channel filter=0.000000e+000 result=40 04:51:54 Config A/D Result=40 04:51:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:54 Get A/D filter: -9.255963e+061 result=40 04:51:54 Get A/D value=-858993460 result=40 04:51:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:54 Aux= 04:51:54 Message to Camera, serial 40005 queued 04:52:31 Received message from Master: op=PointingHead serial=40018 04:52:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:52:31 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:52:32 Point started: ret=0 04:52:32 point_skyscan result=0 04:52:32 Check angles 04:52:32 SkyScan query 04:52:33 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 04:52:33 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 04:52:33 Check angles 04:52:33 SkyScan query 04:52:34 SkyScan query done: ret=0 az=153.585<-10239 ze=-6.495<-12433 Statuses=0009 0008 04:52:34 Msec=750 True Az=153.585 Ze=-6.495 Az status=0009 Ze status=0008 04:52:34 Check angles 04:52:34 SkyScan query 04:52:34 SkyScan query done: ret=0 az=171.435<-11429 ze=-6.495<-12433 Statuses=0009 0008 04:52:34 Msec=1500 True Az=171.435 Ze=-6.495 Az status=0009 Ze status=0008 04:52:35 Check angles 04:52:35 SkyScan query 04:52:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:52:35 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:52:35 Message to Master queued w/err=0: serial=40018 error=0 04:52:40 Received message from Master: op=Filter serial=40019 04:52:40 Color wheel filter change from 0 to 0 04:52:40 FLIGetFilterPos err=0 currentPosition=0 04:52:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:52:40 Filter is already there-color wheel unchanged 04:52:40 Received message from Master: op=Shutter serial=40020 04:52:40 Shutter LASER close 04:52:40 Received message from Camera: op=State serial=40022 04:52:40 GetSingleValue result=40 Value=cccccccc 04:52:40 SkyScan query 04:52:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:52:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:41 Parameters OK 04:52:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:41 Set A/D data flow result=40 04:52:41 Set A/D channel type result=40 04:52:41 Set A/D encoding result=40 04:52:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:41 Set channel filter=0.000000e+000 result=40 04:52:41 Config A/D Result=40 04:52:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:41 Get A/D filter: -9.255963e+061 result=40 04:52:41 Get A/D value=-858993460 result=40 04:52:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:41 Parameters OK 04:52:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:41 Set A/D data flow result=40 04:52:41 Set A/D channel type result=40 04:52:41 Set A/D encoding result=40 04:52:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:41 Set channel filter=0.000000e+000 result=40 04:52:41 Config A/D Result=40 04:52:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:41 Get A/D filter: -9.255963e+061 result=40 04:52:41 Get A/D value=-858993460 result=40 04:52:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:52:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:52:41 Aux= 04:52:41 Message to Camera, serial 40022 queued 04:53:18 Received message from Master: op=PointingHead serial=40035 04:53:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:53:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:53:18 Point started: ret=0 04:53:18 point_skyscan result=0 04:53:19 Check angles 04:53:19 SkyScan query 04:53:19 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 04:53:19 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 04:53:20 Check angles 04:53:20 SkyScan query 04:53:20 SkyScan query done: ret=0 az=135.675<-9045 ze=6.495<-11567 Statuses=0009 0008 04:53:20 Msec=750 True Az=135.675 Ze=6.495 Az status=0009 Ze status=0008 04:53:20 Check angles 04:53:20 SkyScan query 04:53:21 SkyScan query done: ret=0 az=118.23<-7882 ze=6.495<-11567 Statuses=0009 0008 04:53:21 Msec=1500 True Az=118.23 Ze=6.495 Az status=0009 Ze status=0008 04:53:21 Check angles 04:53:21 SkyScan query 04:53:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:53:22 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:53:22 Message to Master queued w/err=0: serial=40035 error=0 04:53:27 Received message from Master: op=Filter serial=40036 04:53:27 Color wheel filter change from 0 to 0 04:53:27 FLIGetFilterPos err=0 currentPosition=0 04:53:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:27 Filter is already there-color wheel unchanged 04:53:27 Received message from Master: op=Shutter serial=40037 04:53:27 Shutter LASER close 04:53:27 Received message from Camera: op=State serial=40039 04:53:27 GetSingleValue result=40 Value=cccccccc 04:53:27 SkyScan query 04:53:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:53:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:27 Parameters OK 04:53:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:27 Set A/D data flow result=40 04:53:27 Set A/D channel type result=40 04:53:27 Set A/D encoding result=40 04:53:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:27 Set channel filter=0.000000e+000 result=40 04:53:27 Config A/D Result=40 04:53:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:27 Get A/D filter: -9.255963e+061 result=40 04:53:27 Get A/D value=-858993460 result=40 04:53:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:27 Parameters OK 04:53:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:27 Set A/D data flow result=40 04:53:27 Set A/D channel type result=40 04:53:27 Set A/D encoding result=40 04:53:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:27 Set channel filter=0.000000e+000 result=40 04:53:27 Config A/D Result=40 04:53:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:27 Get A/D filter: -9.255963e+061 result=40 04:53:27 Get A/D value=-858993460 result=40 04:53:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:27 Aux= 04:53:27 Message to Camera, serial 40039 queued 04:54:04 Received message from Master: op=PointingHead serial=40052 04:54:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:54:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:54:05 Point started: ret=0 04:54:05 point_skyscan result=0 04:54:05 Check angles 04:54:05 SkyScan query 04:54:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 04:54:06 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 04:54:06 Check angles 04:54:06 SkyScan query 04:54:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 04:54:07 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 04:54:07 Check angles 04:54:07 SkyScan query 04:54:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.865<-16391 Statuses=0008 0009 04:54:08 Msec=1500 True Az=112.995 Ze=-65.865 Az status=0008 Ze status=0009 04:54:08 Check angles 04:54:08 SkyScan query 04:54:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 04:54:08 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 04:54:08 Check angles 04:54:08 SkyScan query 04:54:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.76<-19184 Statuses=0008 0009 04:54:09 Msec=3000 True Az=112.995 Ze=-107.76 Az status=0008 Ze status=0009 04:54:09 Check angles 04:54:09 SkyScan query 04:54:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.15<-20610 Statuses=0008 0009 04:54:10 Msec=3750 True Az=112.995 Ze=-129.15 Az status=0008 Ze status=0009 04:54:10 Check angles [UTC 2019-3-1 04:54:10] 04:54:10 SkyScan query 04:54:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.845<-22123 Statuses=0008 0009 04:54:11 Msec=4500 True Az=112.995 Ze=-151.845 Az status=0008 Ze status=0009 04:54:11 Check angles 04:54:11 SkyScan query 04:54:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.94<-23396 Statuses=0008 0009 04:54:11 Msec=5250 True Az=112.995 Ze=-170.94 Az status=0008 Ze status=0009 04:54:11 Check angles 04:54:11 SkyScan query 04:54:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:54:12 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:54:12 Message to Master queued w/err=0: serial=40052 error=0 04:54:17 Received message from Master: op=Filter serial=40053 04:54:17 Color wheel filter change from 0 to 0 04:54:17 FLIGetFilterPos err=0 currentPosition=0 04:54:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:17 Filter is already there-color wheel unchanged 04:54:17 Received message from Master: op=Shutter serial=40054 04:54:17 Shutter LASER open 04:54:17 Received message from Camera: op=State serial=40056 04:54:17 GetSingleValue result=40 Value=cccccccc 04:54:17 SkyScan query 04:54:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:54:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:18 Parameters OK 04:54:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:18 Set A/D data flow result=40 04:54:18 Set A/D channel type result=40 04:54:18 Set A/D encoding result=40 04:54:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:18 Set channel filter=0.000000e+000 result=40 04:54:18 Config A/D Result=40 04:54:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:18 Get A/D filter: -9.255963e+061 result=40 04:54:18 Get A/D value=-858993460 result=40 04:54:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:18 Parameters OK 04:54:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:18 Set A/D data flow result=40 04:54:18 Set A/D channel type result=40 04:54:18 Set A/D encoding result=40 04:54:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:18 Set channel filter=0.000000e+000 result=40 04:54:18 Config A/D Result=40 04:54:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:18 Get A/D filter: -9.255963e+061 result=40 04:54:18 Get A/D value=-858993460 result=40 04:54:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:18 Aux= 04:54:18 Message to Camera, serial 40056 queued 04:54:26 Received message from Master: op=Shutter serial=40066 04:54:26 Shutter LASER close 04:54:27 Received message from Master: op=PointingHead serial=40070 04:54:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:54:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:54:27 Point started: ret=0 04:54:27 point_skyscan result=0 04:54:28 Check angles 04:54:28 SkyScan query 04:54:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.68<-21512 Statuses=0008 0009 04:54:29 Msec=0 True Az=112.995 Ze=-142.68 Az status=0008 Ze status=0009 04:54:29 Check angles 04:54:29 SkyScan query 04:54:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.71<-20114 Statuses=0008 0009 04:54:29 Msec=750 True Az=112.995 Ze=-121.71 Az status=0008 Ze status=0009 04:54:29 Check angles 04:54:29 SkyScan query 04:54:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.77<-18718 Statuses=0008 0009 04:54:30 Msec=1500 True Az=112.995 Ze=-100.77 Az status=0008 Ze status=0009 04:54:30 Check angles 04:54:30 SkyScan query 04:54:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.365<-17291 Statuses=0008 0009 04:54:31 Msec=2250 True Az=112.995 Ze=-79.365 Az status=0008 Ze status=0009 04:54:31 Check angles 04:54:31 SkyScan query 04:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.425<-15895 Statuses=0008 0009 04:54:32 Msec=3000 True Az=112.995 Ze=-58.425 Az status=0008 Ze status=0009 04:54:32 Check angles 04:54:32 SkyScan query 04:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.47<-14498 Statuses=0008 0009 04:54:32 Msec=3750 True Az=112.995 Ze=-37.47 Az status=0008 Ze status=0009 04:54:32 Check angles 04:54:32 SkyScan query 04:54:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.5<-13100 Statuses=0008 0009 04:54:33 Msec=4500 True Az=112.995 Ze=-16.5 Az status=0008 Ze status=0009 04:54:33 Check angles 04:54:33 SkyScan query 04:54:34 SkyScan query done: ret=0 az=112.995<-7533 ze=4.365<-11709 Statuses=0008 0009 04:54:34 Msec=5250 True Az=112.995 Ze=4.365 Az status=0008 Ze status=0009 04:54:34 Check angles 04:54:34 SkyScan query 04:54:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:54:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:54:35 Message to Master queued w/err=0: serial=40070 error=0 04:54:40 Received message from Master: op=Filter serial=40071 04:54:40 Color wheel filter change from 0 to 0 04:54:40 FLIGetFilterPos err=0 currentPosition=0 04:54:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:40 Filter is already there-color wheel unchanged 04:54:40 Received message from Master: op=Shutter serial=40072 04:54:40 Shutter LASER close 04:54:40 Received message from Camera: op=State serial=40074 04:54:40 GetSingleValue result=40 Value=cccccccc 04:54:40 SkyScan query 04:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:54:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:40 Parameters OK 04:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:40 Set A/D data flow result=40 04:54:40 Set A/D channel type result=40 04:54:40 Set A/D encoding result=40 04:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:40 Set channel filter=0.000000e+000 result=40 04:54:40 Config A/D Result=40 04:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:40 Get A/D filter: -9.255963e+061 result=40 04:54:40 Get A/D value=-858993460 result=40 04:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:40 Parameters OK 04:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:40 Set A/D data flow result=40 04:54:40 Set A/D channel type result=40 04:54:40 Set A/D encoding result=40 04:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:40 Set channel filter=0.000000e+000 result=40 04:54:40 Config A/D Result=40 04:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:40 Get A/D filter: -9.255963e+061 result=40 04:54:40 Get A/D value=-858993460 result=40 04:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:40 Aux= 04:54:40 Message to Camera, serial 40074 queued 04:55:17 Received message from Master: op=PointingHead serial=40087 04:55:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:55:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:55:18 Point started: ret=0 04:55:18 point_skyscan result=0 04:55:18 Check angles 04:55:18 SkyScan query 04:55:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:55:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:55:19 Message to Master queued w/err=0: serial=40087 error=0 04:55:24 Received message from Master: op=Filter serial=40088 04:55:24 Color wheel filter change from 0 to 0 04:55:24 FLIGetFilterPos err=0 currentPosition=0 04:55:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:55:24 Filter is already there-color wheel unchanged 04:55:24 Received message from Master: op=Shutter serial=40089 04:55:24 Shutter LASER close 04:55:24 Received message from Camera: op=State serial=40091 04:55:24 GetSingleValue result=40 Value=cccccccc 04:55:24 SkyScan query 04:55:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:55:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:25 Parameters OK 04:55:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:25 Set A/D data flow result=40 04:55:25 Set A/D channel type result=40 04:55:25 Set A/D encoding result=40 04:55:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:25 Set channel filter=0.000000e+000 result=40 04:55:25 Config A/D Result=40 04:55:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:25 Get A/D filter: -9.255963e+061 result=40 04:55:25 Get A/D value=-858993460 result=40 04:55:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:25 Parameters OK 04:55:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:25 Set A/D data flow result=40 04:55:25 Set A/D channel type result=40 04:55:25 Set A/D encoding result=40 04:55:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:25 Set channel filter=0.000000e+000 result=40 04:55:25 Config A/D Result=40 04:55:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:25 Get A/D filter: -9.255963e+061 result=40 04:55:25 Get A/D value=-858993460 result=40 04:55:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:55:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:55:25 Aux= 04:55:25 Message to Camera, serial 40091 queued 04:56:02 Received message from Master: op=PointingHead serial=40104 04:56:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:56:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:56:02 Point started: ret=0 04:56:02 point_skyscan result=0 04:56:03 Check angles 04:56:03 SkyScan query 04:56:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:56:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:56:03 Message to Master queued w/err=0: serial=40104 error=0 04:56:08 Received message from Master: op=Filter serial=40105 04:56:08 Color wheel filter change from 0 to 0 04:56:08 FLIGetFilterPos err=0 currentPosition=0 04:56:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:08 Filter is already there-color wheel unchanged 04:56:09 Received message from Master: op=Shutter serial=40106 04:56:09 Shutter LASER close 04:56:09 Received message from Camera: op=State serial=40108 04:56:09 GetSingleValue result=40 Value=cccccccc 04:56:09 SkyScan query 04:56:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:56:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:09 Parameters OK 04:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:09 Set A/D data flow result=40 04:56:09 Set A/D channel type result=40 04:56:09 Set A/D encoding result=40 04:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:09 Set channel filter=0.000000e+000 result=40 04:56:09 Config A/D Result=40 04:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:09 Get A/D filter: -9.255963e+061 result=40 04:56:09 Get A/D value=-858993460 result=40 04:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:09 Parameters OK 04:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:09 Set A/D data flow result=40 04:56:09 Set A/D channel type result=40 04:56:09 Set A/D encoding result=40 04:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:09 Set channel filter=0.000000e+000 result=40 04:56:09 Config A/D Result=40 04:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:09 Get A/D filter: -9.255963e+061 result=40 04:56:09 Get A/D value=-858993460 result=40 04:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:09 Aux= 04:56:09 Message to Camera, serial 40108 queued 04:56:46 Received message from Master: op=PointingHead serial=40121 04:56:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:56:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:56:46 Point started: ret=0 04:56:46 point_skyscan result=0 04:56:47 Check angles 04:56:47 SkyScan query 04:56:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:56:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:56:48 Message to Master queued w/err=0: serial=40121 error=0 04:56:53 Received message from Master: op=Filter serial=40122 04:56:53 Color wheel filter change from 0 to 0 04:56:53 FLIGetFilterPos err=0 currentPosition=0 04:56:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:53 Filter is already there-color wheel unchanged 04:56:53 Received message from Master: op=Shutter serial=40123 04:56:53 Shutter LASER close 04:56:53 Received message from Camera: op=State serial=40125 04:56:53 GetSingleValue result=40 Value=cccccccc 04:56:53 SkyScan query 04:56:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:56:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:53 Parameters OK 04:56:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:53 Set A/D data flow result=40 04:56:53 Set A/D channel type result=40 04:56:53 Set A/D encoding result=40 04:56:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:53 Set channel filter=0.000000e+000 result=40 04:56:53 Config A/D Result=40 04:56:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:53 Get A/D filter: -9.255963e+061 result=40 04:56:53 Get A/D value=-858993460 result=40 04:56:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:53 Parameters OK 04:56:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:53 Set A/D data flow result=40 04:56:53 Set A/D channel type result=40 04:56:53 Set A/D encoding result=40 04:56:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:53 Set channel filter=0.000000e+000 result=40 04:56:53 Config A/D Result=40 04:56:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:53 Get A/D filter: -9.255963e+061 result=40 04:56:53 Get A/D value=-858993460 result=40 04:56:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:53 Aux= 04:56:53 Message to Camera, serial 40125 queued 04:57:30 Received message from Master: op=PointingHead serial=40138 04:57:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:57:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:57:31 Point started: ret=0 04:57:31 point_skyscan result=0 04:57:31 Check angles 04:57:31 SkyScan query 04:57:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 04:57:32 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 04:57:32 Check angles 04:57:32 SkyScan query 04:57:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 04:57:33 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 04:57:33 Check angles 04:57:33 SkyScan query 04:57:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 04:57:33 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 04:57:34 Check angles 04:57:34 SkyScan query 04:57:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 04:57:34 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 04:57:34 Check angles 04:57:34 SkyScan query 04:57:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.46<-19164 Statuses=0008 0009 04:57:35 Msec=3000 True Az=112.995 Ze=-107.46 Az status=0008 Ze status=0009 04:57:35 Check angles 04:57:35 SkyScan query 04:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.4<-20560 Statuses=0008 0009 04:57:36 Msec=3750 True Az=112.995 Ze=-128.4 Az status=0008 Ze status=0009 04:57:36 Check angles 04:57:36 SkyScan query 04:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.385<-21959 Statuses=0008 0009 04:57:36 Msec=4500 True Az=112.995 Ze=-149.385 Az status=0008 Ze status=0009 04:57:37 Check angles 04:57:37 SkyScan query 04:57:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.31<-23354 Statuses=0008 0009 04:57:37 Msec=5250 True Az=112.995 Ze=-170.31 Az status=0008 Ze status=0009 04:57:37 Check angles 04:57:37 SkyScan query 04:57:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:57:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:57:38 Message to Master queued w/err=0: serial=40138 error=0 04:57:43 Received message from Master: op=Filter serial=40139 04:57:43 Color wheel filter change from 0 to 0 04:57:43 FLIGetFilterPos err=0 currentPosition=0 04:57:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:43 Filter is already there-color wheel unchanged 04:57:43 Received message from Master: op=Shutter serial=40140 04:57:43 Shutter LASER open 04:57:43 Received message from Camera: op=State serial=40142 04:57:43 GetSingleValue result=40 Value=cccccccc 04:57:43 SkyScan query 04:57:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:57:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:44 Parameters OK 04:57:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:44 Set A/D data flow result=40 04:57:44 Set A/D channel type result=40 04:57:44 Set A/D encoding result=40 04:57:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:44 Set channel filter=0.000000e+000 result=40 04:57:44 Config A/D Result=40 04:57:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:44 Get A/D filter: -9.255963e+061 result=40 04:57:44 Get A/D value=-858993460 result=40 04:57:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:44 Parameters OK 04:57:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:44 Set A/D data flow result=40 04:57:44 Set A/D channel type result=40 04:57:44 Set A/D encoding result=40 04:57:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:44 Set channel filter=0.000000e+000 result=40 04:57:44 Config A/D Result=40 04:57:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:44 Get A/D filter: -9.255963e+061 result=40 04:57:44 Get A/D value=-858993460 result=40 04:57:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:44 Aux= 04:57:44 Message to Camera, serial 40142 queued 04:57:52 Received message from Master: op=Shutter serial=40152 04:57:52 Shutter LASER close 04:57:53 Received message from Master: op=PointingHead serial=40156 04:57:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:57:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:57:53 Point started: ret=0 04:57:53 point_skyscan result=0 04:57:54 Check angles 04:57:54 SkyScan query 04:57:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 04:57:55 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 04:57:55 Check angles 04:57:55 SkyScan query 04:57:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.92<-20128 Statuses=0008 0009 04:57:55 Msec=750 True Az=112.995 Ze=-121.92 Az status=0008 Ze status=0009 04:57:56 Check angles 04:57:56 SkyScan query 04:57:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.56<-18704 Statuses=0008 0009 04:57:56 Msec=1500 True Az=112.995 Ze=-100.56 Az status=0008 Ze status=0009 04:57:56 Check angles 04:57:56 SkyScan query 04:57:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.605<-17307 Statuses=0008 0009 04:57:57 Msec=2250 True Az=112.995 Ze=-79.605 Az status=0008 Ze status=0009 04:57:57 Check angles 04:57:57 SkyScan query 04:57:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.185<-15879 Statuses=0008 0009 04:57:58 Msec=3000 True Az=112.995 Ze=-58.185 Az status=0008 Ze status=0009 04:57:58 Check angles 04:57:58 SkyScan query 04:57:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.825<-14455 Statuses=0008 0009 04:57:58 Msec=3750 True Az=112.995 Ze=-36.825 Az status=0008 Ze status=0009 04:57:59 Check angles 04:57:59 SkyScan query 04:57:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.39<-13026 Statuses=0008 0009 04:57:59 Msec=4500 True Az=112.995 Ze=-15.39 Az status=0008 Ze status=0009 04:57:59 Check angles 04:57:59 SkyScan query 04:58:00 SkyScan query done: ret=0 az=112.995<-7533 ze=5.19<-11654 Statuses=0008 0009 04:58:00 Msec=5250 True Az=112.995 Ze=5.19 Az status=0008 Ze status=0009 04:58:00 Check angles 04:58:00 SkyScan query 04:58:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:58:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:58:01 Message to Master queued w/err=0: serial=40156 error=0 04:58:06 Received message from Master: op=Filter serial=40157 04:58:06 Color wheel filter change from 0 to 0 04:58:06 FLIGetFilterPos err=0 currentPosition=0 04:58:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:06 Filter is already there-color wheel unchanged 04:58:06 Received message from Master: op=Shutter serial=40158 04:58:06 Shutter LASER close 04:58:06 Received message from Camera: op=State serial=40160 04:58:06 GetSingleValue result=40 Value=cccccccc 04:58:06 SkyScan query 04:58:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:58:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:07 Parameters OK 04:58:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:07 Set A/D data flow result=40 04:58:07 Set A/D channel type result=40 04:58:07 Set A/D encoding result=40 04:58:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:07 Set channel filter=0.000000e+000 result=40 04:58:07 Config A/D Result=40 04:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:07 Get A/D filter: -9.255963e+061 result=40 04:58:07 Get A/D value=-858993460 result=40 04:58:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:07 Parameters OK 04:58:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:07 Set A/D data flow result=40 04:58:07 Set A/D channel type result=40 04:58:07 Set A/D encoding result=40 04:58:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:07 Set channel filter=0.000000e+000 result=40 04:58:07 Config A/D Result=40 04:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:07 Get A/D filter: -9.255963e+061 result=40 04:58:07 Get A/D value=-858993460 result=40 04:58:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:07 Aux= 04:58:07 Message to Camera, serial 40160 queued 04:58:43 Received message from Master: op=PointingHead serial=40173 04:58:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:58:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:58:44 Point started: ret=0 04:58:44 point_skyscan result=0 04:58:44 Check angles 04:58:44 SkyScan query 04:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:58:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:58:45 Message to Master queued w/err=0: serial=40173 error=0 04:58:50 Received message from Master: op=Filter serial=40174 04:58:50 Color wheel filter change from 0 to 0 04:58:50 FLIGetFilterPos err=0 currentPosition=0 04:58:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:50 Filter is already there-color wheel unchanged 04:58:50 Received message from Master: op=Shutter serial=40175 04:58:50 Shutter LASER close 04:58:50 Received message from Camera: op=State serial=40177 04:58:50 GetSingleValue result=40 Value=cccccccc 04:58:50 SkyScan query 04:58:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:58:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:51 Parameters OK 04:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:51 Set A/D data flow result=40 04:58:51 Set A/D channel type result=40 04:58:51 Set A/D encoding result=40 04:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:51 Set channel filter=0.000000e+000 result=40 04:58:51 Config A/D Result=40 04:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:51 Get A/D filter: -9.255963e+061 result=40 04:58:51 Get A/D value=-858993460 result=40 04:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:51 Parameters OK 04:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:51 Set A/D data flow result=40 04:58:51 Set A/D channel type result=40 04:58:51 Set A/D encoding result=40 04:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:51 Set channel filter=0.000000e+000 result=40 04:58:51 Config A/D Result=40 04:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:51 Get A/D filter: -9.255963e+061 result=40 04:58:51 Get A/D value=-858993460 result=40 04:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:51 Aux= 04:58:51 Message to Camera, serial 40177 queued 04:59:28 Received message from Master: op=PointingHead serial=40190 04:59:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:59:28 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:59:28 Point started: ret=0 04:59:28 point_skyscan result=0 04:59:29 Check angles 04:59:29 SkyScan query 04:59:29 SkyScan query done: ret=0 az=135.855<-9057 ze=-6.495<-12433 Statuses=0009 0008 04:59:29 Msec=0 True Az=135.855 Ze=-6.495 Az status=0009 Ze status=0008 04:59:30 Check angles 04:59:30 SkyScan query 04:59:30 SkyScan query done: ret=0 az=153.36<-10224 ze=-6.48<-12432 Statuses=0009 0008 04:59:30 Msec=750 True Az=153.36 Ze=-6.48 Az status=0009 Ze status=0008 04:59:30 Check angles 04:59:30 SkyScan query 04:59:31 SkyScan query done: ret=0 az=171.225<-11415 ze=-6.48<-12432 Statuses=0009 0008 04:59:31 Msec=1500 True Az=171.225 Ze=-6.48 Az status=0009 Ze status=0008 04:59:31 Check angles 04:59:31 SkyScan query 04:59:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:59:32 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 04:59:32 Message to Master queued w/err=0: serial=40190 error=0 04:59:37 Received message from Master: op=Filter serial=40191 04:59:37 Color wheel filter change from 0 to 0 04:59:37 FLIGetFilterPos err=0 currentPosition=0 04:59:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:37 Filter is already there-color wheel unchanged 04:59:37 Received message from Master: op=Shutter serial=40192 04:59:37 Shutter LASER close 04:59:37 Received message from Camera: op=State serial=40194 04:59:37 GetSingleValue result=40 Value=cccccccc 04:59:37 SkyScan query 04:59:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 04:59:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:37 Parameters OK 04:59:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:37 Set A/D data flow result=40 04:59:37 Set A/D channel type result=40 04:59:37 Set A/D encoding result=40 04:59:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:37 Set channel filter=0.000000e+000 result=40 04:59:37 Config A/D Result=40 04:59:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:37 Get A/D filter: -9.255963e+061 result=40 04:59:37 Get A/D value=-858993460 result=40 04:59:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:37 Parameters OK 04:59:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:37 Set A/D data flow result=40 04:59:37 Set A/D channel type result=40 04:59:37 Set A/D encoding result=40 04:59:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:37 Set channel filter=0.000000e+000 result=40 04:59:37 Config A/D Result=40 04:59:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:37 Get A/D filter: -9.255963e+061 result=40 04:59:37 Get A/D value=-858993460 result=40 04:59:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:37 Aux= 04:59:37 Message to Camera, serial 40194 queued 05:00:14 Received message from Master: op=PointingHead serial=40207 05:00:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:00:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:00:15 Point started: ret=0 05:00:15 point_skyscan result=0 05:00:15 Check angles 05:00:15 SkyScan query 05:00:16 SkyScan query done: ret=0 az=153.09<-10206 ze=6.51<-11566 Statuses=0009 0008 05:00:16 Msec=0 True Az=153.09 Ze=6.51 Az status=0009 Ze status=0008 05:00:16 Check angles 05:00:16 SkyScan query 05:00:17 SkyScan query done: ret=0 az=135.225<-9015 ze=6.495<-11567 Statuses=0009 0008 05:00:17 Msec=750 True Az=135.225 Ze=6.495 Az status=0009 Ze status=0008 05:00:17 Check angles 05:00:17 SkyScan query 05:00:17 SkyScan query done: ret=0 az=117.69<-7846 ze=6.495<-11567 Statuses=0009 0008 05:00:17 Msec=1500 True Az=117.69 Ze=6.495 Az status=0009 Ze status=0008 05:00:18 Check angles 05:00:18 SkyScan query 05:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:00:18 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:00:18 Message to Master queued w/err=0: serial=40207 error=0 05:00:23 Received message from Master: op=Filter serial=40208 05:00:23 Color wheel filter change from 0 to 0 05:00:23 FLIGetFilterPos err=0 currentPosition=0 05:00:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:23 Filter is already there-color wheel unchanged 05:00:23 Received message from Master: op=Shutter serial=40209 05:00:23 Shutter LASER close 05:00:23 Received message from Camera: op=State serial=40211 05:00:23 GetSingleValue result=40 Value=cccccccc 05:00:23 SkyScan query 05:00:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:00:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:24 Parameters OK 05:00:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:24 Set A/D data flow result=40 05:00:24 Set A/D channel type result=40 05:00:24 Set A/D encoding result=40 05:00:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:24 Set channel filter=0.000000e+000 result=40 05:00:24 Config A/D Result=40 05:00:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:24 Get A/D filter: -9.255963e+061 result=40 05:00:24 Get A/D value=-858993460 result=40 05:00:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:24 Parameters OK 05:00:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:24 Set A/D data flow result=40 05:00:24 Set A/D channel type result=40 05:00:24 Set A/D encoding result=40 05:00:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:24 Set channel filter=0.000000e+000 result=40 05:00:24 Config A/D Result=40 05:00:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:24 Get A/D filter: -9.255963e+061 result=40 05:00:24 Get A/D value=-858993460 result=40 05:00:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:24 Aux= 05:00:24 Message to Camera, serial 40211 queued 05:01:01 Received message from Master: op=PointingHead serial=40224 05:01:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:01:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:01:01 Point started: ret=0 05:01:01 point_skyscan result=0 05:01:02 Check angles 05:01:02 SkyScan query 05:01:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 05:01:03 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 05:01:03 Check angles 05:01:03 SkyScan query 05:01:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 05:01:03 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 05:01:03 Check angles 05:01:03 SkyScan query 05:01:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.085<-16339 Statuses=0008 0009 05:01:04 Msec=1500 True Az=112.995 Ze=-65.085 Az status=0008 Ze status=0009 05:01:04 Check angles 05:01:04 SkyScan query 05:01:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 05:01:05 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 05:01:05 Check angles 05:01:05 SkyScan query 05:01:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 05:01:06 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 05:01:06 Check angles 05:01:06 SkyScan query 05:01:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.355<-20557 Statuses=0008 0009 05:01:06 Msec=3750 True Az=112.995 Ze=-128.355 Az status=0008 Ze status=0009 05:01:06 Check angles 05:01:06 SkyScan query 05:01:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 05:01:07 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 05:01:07 Check angles 05:01:07 SkyScan query 05:01:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.655<-23377 Statuses=0008 0009 05:01:08 Msec=5250 True Az=112.995 Ze=-170.655 Az status=0008 Ze status=0009 05:01:08 Check angles 05:01:08 SkyScan query 05:01:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:01:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:01:09 Message to Master queued w/err=0: serial=40224 error=0 05:01:14 Received message from Master: op=Filter serial=40225 05:01:14 Color wheel filter change from 0 to 0 05:01:14 FLIGetFilterPos err=0 currentPosition=0 05:01:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:14 Filter is already there-color wheel unchanged 05:01:14 Received message from Master: op=Shutter serial=40226 05:01:14 Shutter LASER open 05:01:14 Received message from Camera: op=State serial=40228 05:01:14 GetSingleValue result=40 Value=cccccccc 05:01:14 SkyScan query 05:01:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:01:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:15 Parameters OK 05:01:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:15 Set A/D data flow result=40 05:01:15 Set A/D channel type result=40 05:01:15 Set A/D encoding result=40 05:01:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:15 Set channel filter=0.000000e+000 result=40 05:01:15 Config A/D Result=40 05:01:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:15 Get A/D filter: -9.255963e+061 result=40 05:01:15 Get A/D value=-858993460 result=40 05:01:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:15 Parameters OK 05:01:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:15 Set A/D data flow result=40 05:01:15 Set A/D channel type result=40 05:01:15 Set A/D encoding result=40 05:01:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:15 Set channel filter=0.000000e+000 result=40 05:01:15 Config A/D Result=40 05:01:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:15 Get A/D filter: -9.255963e+061 result=40 05:01:15 Get A/D value=-858993460 result=40 05:01:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:15 Aux= 05:01:15 Message to Camera, serial 40228 queued 05:01:23 Received message from Master: op=Shutter serial=40238 05:01:23 Shutter LASER close 05:01:23 Received message from Master: op=PointingHead serial=40242 05:01:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:01:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:01:24 Point started: ret=0 05:01:24 point_skyscan result=0 05:01:25 Check angles 05:01:25 SkyScan query 05:01:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 05:01:25 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 05:01:25 Check angles 05:01:25 SkyScan query 05:01:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.425<-20095 Statuses=0008 0009 05:01:26 Msec=750 True Az=112.995 Ze=-121.425 Az status=0008 Ze status=0009 05:01:26 Check angles 05:01:26 SkyScan query 05:01:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 05:01:27 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 05:01:27 Check angles 05:01:27 SkyScan query 05:01:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.5<-17300 Statuses=0008 0009 05:01:27 Msec=2250 True Az=112.995 Ze=-79.5 Az status=0008 Ze status=0009 05:01:28 Check angles 05:01:28 SkyScan query 05:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.545<-15903 Statuses=0008 0009 05:01:28 Msec=3000 True Az=112.995 Ze=-58.545 Az status=0008 Ze status=0009 05:01:28 Check angles 05:01:28 SkyScan query 05:01:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.17<-14478 Statuses=0008 0009 05:01:29 Msec=3750 True Az=112.995 Ze=-37.17 Az status=0008 Ze status=0009 05:01:29 Check angles 05:01:29 SkyScan query 05:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.75<-13050 Statuses=0008 0009 05:01:30 Msec=4500 True Az=112.995 Ze=-15.75 Az status=0008 Ze status=0009 05:01:30 Check angles 05:01:30 SkyScan query 05:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=5.235<-11651 Statuses=0008 0009 05:01:30 Msec=5250 True Az=112.995 Ze=5.235 Az status=0008 Ze status=0009 05:01:31 Check angles 05:01:31 SkyScan query 05:01:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:01:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:01:31 Message to Master queued w/err=0: serial=40242 error=0 05:01:36 Received message from Master: op=Filter serial=40243 05:01:36 Color wheel filter change from 0 to 0 05:01:36 FLIGetFilterPos err=0 currentPosition=0 05:01:36 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:36 Filter is already there-color wheel unchanged 05:01:36 Received message from Master: op=Shutter serial=40244 05:01:36 Shutter LASER close 05:01:36 Received message from Camera: op=State serial=40246 05:01:36 GetSingleValue result=40 Value=cccccccc 05:01:36 SkyScan query 05:01:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:01:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:37 Parameters OK 05:01:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:37 Set A/D data flow result=40 05:01:37 Set A/D channel type result=40 05:01:37 Set A/D encoding result=40 05:01:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:37 Set channel filter=0.000000e+000 result=40 05:01:37 Config A/D Result=40 05:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:37 Get A/D filter: -9.255963e+061 result=40 05:01:37 Get A/D value=-858993460 result=40 05:01:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:37 Parameters OK 05:01:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:37 Set A/D data flow result=40 05:01:37 Set A/D channel type result=40 05:01:37 Set A/D encoding result=40 05:01:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:37 Set channel filter=0.000000e+000 result=40 05:01:37 Config A/D Result=40 05:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:37 Get A/D filter: -9.255963e+061 result=40 05:01:37 Get A/D value=-858993460 result=40 05:01:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:37 Aux= 05:01:37 Message to Camera, serial 40246 queued 05:02:14 Received message from Master: op=PointingHead serial=40259 05:02:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:02:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:02:14 Point started: ret=0 05:02:14 point_skyscan result=0 05:02:15 Check angles 05:02:15 SkyScan query 05:02:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:02:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:02:16 Message to Master queued w/err=0: serial=40259 error=0 05:02:21 Received message from Master: op=Filter serial=40260 05:02:21 Color wheel filter change from 0 to 0 05:02:21 FLIGetFilterPos err=0 currentPosition=0 05:02:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:02:21 Filter is already there-color wheel unchanged 05:02:21 Received message from Master: op=Shutter serial=40261 05:02:21 Shutter LASER close 05:02:21 Received message from Camera: op=State serial=40263 05:02:21 GetSingleValue result=40 Value=cccccccc 05:02:21 SkyScan query 05:02:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:02:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:21 Parameters OK 05:02:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:21 Set A/D data flow result=40 05:02:21 Set A/D channel type result=40 05:02:21 Set A/D encoding result=40 05:02:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:21 Set channel filter=0.000000e+000 result=40 05:02:21 Config A/D Result=40 05:02:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:21 Get A/D filter: -9.255963e+061 result=40 05:02:21 Get A/D value=-858993460 result=40 05:02:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:21 Parameters OK 05:02:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:21 Set A/D data flow result=40 05:02:21 Set A/D channel type result=40 05:02:21 Set A/D encoding result=40 05:02:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:21 Set channel filter=0.000000e+000 result=40 05:02:21 Config A/D Result=40 05:02:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:21 Get A/D filter: -9.255963e+061 result=40 05:02:21 Get A/D value=-858993460 result=40 05:02:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:02:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:02:21 Aux= 05:02:21 Message to Camera, serial 40263 queued 05:02:58 Received message from Master: op=PointingHead serial=40276 05:02:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:02:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:02:59 Point started: ret=0 05:02:59 point_skyscan result=0 05:02:59 Check angles 05:02:59 SkyScan query 05:03:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:03:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:03:00 Message to Master queued w/err=0: serial=40276 error=0 05:03:05 Received message from Master: op=Filter serial=40277 05:03:05 Color wheel filter change from 0 to 0 05:03:05 FLIGetFilterPos err=0 currentPosition=0 05:03:05 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:05 Filter is already there-color wheel unchanged 05:03:05 Received message from Master: op=Shutter serial=40278 05:03:05 Shutter LASER close 05:03:05 Received message from Camera: op=State serial=40280 05:03:05 GetSingleValue result=40 Value=cccccccc 05:03:05 SkyScan query 05:03:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:03:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:06 Parameters OK 05:03:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:06 Set A/D data flow result=40 05:03:06 Set A/D channel type result=40 05:03:06 Set A/D encoding result=40 05:03:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:06 Set channel filter=0.000000e+000 result=40 05:03:06 Config A/D Result=40 05:03:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:06 Get A/D filter: -9.255963e+061 result=40 05:03:06 Get A/D value=-858993460 result=40 05:03:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:06 Parameters OK 05:03:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:06 Set A/D data flow result=40 05:03:06 Set A/D channel type result=40 05:03:06 Set A/D encoding result=40 05:03:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:06 Set channel filter=0.000000e+000 result=40 05:03:06 Config A/D Result=40 05:03:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:06 Get A/D filter: -9.255963e+061 result=40 05:03:06 Get A/D value=-858993460 result=40 05:03:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:06 Aux= 05:03:06 Message to Camera, serial 40280 queued 05:03:38 Received message from Master: op=Identify serial=40285 05:03:42 Received message from Master: op=PointingHead serial=40296 05:03:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:03:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:03:43 Point started: ret=0 05:03:43 point_skyscan result=0 05:03:44 Check angles 05:03:44 SkyScan query 05:03:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:03:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:03:44 Message to Master queued w/err=0: serial=40296 error=0 05:03:49 Received message from Master: op=Filter serial=40297 05:03:49 Color wheel filter change from 0 to 0 05:03:49 FLIGetFilterPos err=0 currentPosition=0 05:03:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:49 Filter is already there-color wheel unchanged 05:03:49 Received message from Master: op=Shutter serial=40298 05:03:49 Shutter LASER close 05:03:49 Received message from Camera: op=State serial=40300 05:03:49 GetSingleValue result=40 Value=cccccccc 05:03:49 SkyScan query 05:03:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:03:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:50 Parameters OK 05:03:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:50 Set A/D data flow result=40 05:03:50 Set A/D channel type result=40 05:03:50 Set A/D encoding result=40 05:03:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:50 Set channel filter=0.000000e+000 result=40 05:03:50 Config A/D Result=40 05:03:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:50 Get A/D filter: -9.255963e+061 result=40 05:03:50 Get A/D value=-858993460 result=40 05:03:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:50 Parameters OK 05:03:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:50 Set A/D data flow result=40 05:03:50 Set A/D channel type result=40 05:03:50 Set A/D encoding result=40 05:03:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:50 Set channel filter=0.000000e+000 result=40 05:03:50 Config A/D Result=40 05:03:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:50 Get A/D filter: -9.255963e+061 result=40 05:03:50 Get A/D value=-858993460 result=40 05:03:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:50 Aux= 05:03:50 Message to Camera, serial 40300 queued [UTC 2019-3-1 05:03:50] 05:04:27 Received message from Master: op=PointingHead serial=40313 05:04:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:04:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:04:27 Point started: ret=0 05:04:27 point_skyscan result=0 05:04:28 Check angles 05:04:28 SkyScan query 05:04:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 05:04:28 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 05:04:29 Check angles 05:04:29 SkyScan query 05:04:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.98<-14932 Statuses=0008 0009 05:04:29 Msec=750 True Az=112.995 Ze=-43.98 Az status=0008 Ze status=0009 05:04:29 Check angles 05:04:29 SkyScan query 05:04:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 05:04:30 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 05:04:30 Check angles 05:04:30 SkyScan query 05:04:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.905<-17727 Statuses=0008 0009 05:04:31 Msec=2250 True Az=112.995 Ze=-85.905 Az status=0008 Ze status=0009 05:04:31 Check angles 05:04:31 SkyScan query 05:04:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.86<-19124 Statuses=0008 0009 05:04:31 Msec=3000 True Az=112.995 Ze=-106.86 Az status=0008 Ze status=0009 05:04:32 Check angles 05:04:32 SkyScan query 05:04:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.83<-20522 Statuses=0008 0009 05:04:32 Msec=3750 True Az=112.995 Ze=-127.83 Az status=0008 Ze status=0009 05:04:32 Check angles 05:04:32 SkyScan query 05:04:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.77<-21918 Statuses=0008 0009 05:04:33 Msec=4500 True Az=112.995 Ze=-148.77 Az status=0008 Ze status=0009 05:04:33 Check angles 05:04:33 SkyScan query 05:04:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.725<-23315 Statuses=0008 0009 05:04:34 Msec=5250 True Az=112.995 Ze=-169.725 Az status=0008 Ze status=0009 05:04:34 Check angles 05:04:34 SkyScan query 05:04:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:04:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:04:34 Message to Master queued w/err=0: serial=40313 error=0 05:04:39 Received message from Master: op=Filter serial=40314 05:04:39 Color wheel filter change from 0 to 0 05:04:39 FLIGetFilterPos err=0 currentPosition=0 05:04:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:39 Filter is already there-color wheel unchanged 05:04:40 Received message from Master: op=Shutter serial=40315 05:04:40 Shutter LASER open 05:04:40 Received message from Camera: op=State serial=40317 05:04:40 GetSingleValue result=40 Value=cccccccc 05:04:40 SkyScan query 05:04:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:04:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:40 Parameters OK 05:04:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:40 Set A/D data flow result=40 05:04:40 Set A/D channel type result=40 05:04:40 Set A/D encoding result=40 05:04:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:40 Set channel filter=0.000000e+000 result=40 05:04:40 Config A/D Result=40 05:04:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:40 Get A/D filter: -9.255963e+061 result=40 05:04:40 Get A/D value=-858993460 result=40 05:04:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:40 Parameters OK 05:04:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:40 Set A/D data flow result=40 05:04:40 Set A/D channel type result=40 05:04:40 Set A/D encoding result=40 05:04:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:40 Set channel filter=0.000000e+000 result=40 05:04:40 Config A/D Result=40 05:04:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:40 Get A/D filter: -9.255963e+061 result=40 05:04:40 Get A/D value=-858993460 result=40 05:04:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:40 Aux= 05:04:40 Message to Camera, serial 40317 queued 05:04:49 Received message from Master: op=Shutter serial=40327 05:04:49 Shutter LASER close 05:04:49 Received message from Master: op=PointingHead serial=40331 05:04:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:04:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:04:50 Point started: ret=0 05:04:50 point_skyscan result=0 05:04:51 Check angles 05:04:51 SkyScan query 05:04:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 05:04:51 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 05:04:51 Check angles 05:04:51 SkyScan query 05:04:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.665<-20111 Statuses=0008 0009 05:04:52 Msec=750 True Az=112.995 Ze=-121.665 Az status=0008 Ze status=0009 05:04:52 Check angles 05:04:52 SkyScan query 05:04:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.71<-18714 Statuses=0008 0009 05:04:53 Msec=1500 True Az=112.995 Ze=-100.71 Az status=0008 Ze status=0009 05:04:53 Check angles 05:04:53 SkyScan query 05:04:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.77<-17318 Statuses=0008 0009 05:04:53 Msec=2250 True Az=112.995 Ze=-79.77 Az status=0008 Ze status=0009 05:04:54 Check angles 05:04:54 SkyScan query 05:04:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.35<-15890 Statuses=0008 0009 05:04:54 Msec=3000 True Az=112.995 Ze=-58.35 Az status=0008 Ze status=0009 05:04:54 Check angles 05:04:54 SkyScan query 05:04:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.425<-14495 Statuses=0008 0009 05:04:55 Msec=3750 True Az=112.995 Ze=-37.425 Az status=0008 Ze status=0009 05:04:55 Check angles 05:04:55 SkyScan query 05:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.44<-13096 Statuses=0008 0009 05:04:56 Msec=4500 True Az=112.995 Ze=-16.44 Az status=0008 Ze status=0009 05:04:56 Check angles 05:04:56 SkyScan query 05:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.755<-11683 Statuses=0008 0009 05:04:56 Msec=5250 True Az=112.995 Ze=4.755 Az status=0008 Ze status=0009 05:04:57 Check angles 05:04:57 SkyScan query 05:04:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:04:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:04:57 Message to Master queued w/err=0: serial=40331 error=0 05:05:02 Received message from Master: op=Filter serial=40332 05:05:02 Color wheel filter change from 0 to 0 05:05:02 FLIGetFilterPos err=0 currentPosition=0 05:05:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:02 Filter is already there-color wheel unchanged 05:05:02 Received message from Master: op=Shutter serial=40333 05:05:02 Shutter LASER close 05:05:03 Received message from Camera: op=State serial=40335 05:05:03 GetSingleValue result=40 Value=cccccccc 05:05:03 SkyScan query 05:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:05:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:03 Parameters OK 05:05:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:03 Set A/D data flow result=40 05:05:03 Set A/D channel type result=40 05:05:03 Set A/D encoding result=40 05:05:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:03 Set channel filter=0.000000e+000 result=40 05:05:03 Config A/D Result=40 05:05:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:03 Get A/D filter: -9.255963e+061 result=40 05:05:03 Get A/D value=-858993460 result=40 05:05:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:03 Parameters OK 05:05:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:03 Set A/D data flow result=40 05:05:03 Set A/D channel type result=40 05:05:03 Set A/D encoding result=40 05:05:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:03 Set channel filter=0.000000e+000 result=40 05:05:03 Config A/D Result=40 05:05:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:03 Get A/D filter: -9.255963e+061 result=40 05:05:03 Get A/D value=-858993460 result=40 05:05:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:03 Aux= 05:05:03 Message to Camera, serial 40335 queued 05:05:40 Received message from Master: op=PointingHead serial=40348 05:05:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:05:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:05:40 Point started: ret=0 05:05:40 point_skyscan result=0 05:05:41 Check angles 05:05:41 SkyScan query 05:05:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:05:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:05:42 Message to Master queued w/err=0: serial=40348 error=0 05:05:47 Received message from Master: op=Filter serial=40349 05:05:47 Color wheel filter change from 0 to 0 05:05:47 FLIGetFilterPos err=0 currentPosition=0 05:05:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:47 Filter is already there-color wheel unchanged 05:05:47 Received message from Master: op=Shutter serial=40350 05:05:47 Shutter LASER close 05:05:47 Received message from Camera: op=State serial=40352 05:05:47 GetSingleValue result=40 Value=cccccccc 05:05:47 SkyScan query 05:05:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:05:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:47 Parameters OK 05:05:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:47 Set A/D data flow result=40 05:05:47 Set A/D channel type result=40 05:05:47 Set A/D encoding result=40 05:05:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:47 Set channel filter=0.000000e+000 result=40 05:05:47 Config A/D Result=40 05:05:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:47 Get A/D filter: -9.255963e+061 result=40 05:05:47 Get A/D value=-858993460 result=40 05:05:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:47 Parameters OK 05:05:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:47 Set A/D data flow result=40 05:05:47 Set A/D channel type result=40 05:05:47 Set A/D encoding result=40 05:05:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:47 Set channel filter=0.000000e+000 result=40 05:05:47 Config A/D Result=40 05:05:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:47 Get A/D filter: -9.255963e+061 result=40 05:05:47 Get A/D value=-858993460 result=40 05:05:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:47 Aux= 05:05:47 Message to Camera, serial 40352 queued 05:06:24 Received message from Master: op=PointingHead serial=40365 05:06:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:06:24 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:06:25 Point started: ret=0 05:06:25 point_skyscan result=0 05:06:25 Check angles 05:06:25 SkyScan query 05:06:26 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 05:06:26 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 05:06:26 Check angles 05:06:26 SkyScan query 05:06:27 SkyScan query done: ret=0 az=154.095<-10273 ze=-6.495<-12433 Statuses=0009 0008 05:06:27 Msec=750 True Az=154.095 Ze=-6.495 Az status=0009 Ze status=0008 05:06:27 Check angles 05:06:27 SkyScan query 05:06:27 SkyScan query done: ret=0 az=171.54<-11436 ze=-6.495<-12433 Statuses=0009 0008 05:06:27 Msec=1500 True Az=171.54 Ze=-6.495 Az status=0009 Ze status=0008 05:06:28 Check angles 05:06:28 SkyScan query 05:06:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:06:28 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:06:28 Message to Master queued w/err=0: serial=40365 error=0 05:06:33 Received message from Master: op=Filter serial=40366 05:06:33 Color wheel filter change from 0 to 0 05:06:33 FLIGetFilterPos err=0 currentPosition=0 05:06:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:33 Filter is already there-color wheel unchanged 05:06:33 Received message from Master: op=Shutter serial=40367 05:06:33 Shutter LASER close 05:06:33 Received message from Camera: op=State serial=40369 05:06:33 GetSingleValue result=40 Value=cccccccc 05:06:33 SkyScan query 05:06:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:06:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:34 Parameters OK 05:06:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:34 Set A/D data flow result=40 05:06:34 Set A/D channel type result=40 05:06:34 Set A/D encoding result=40 05:06:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:34 Set channel filter=0.000000e+000 result=40 05:06:34 Config A/D Result=40 05:06:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:34 Get A/D filter: -9.255963e+061 result=40 05:06:34 Get A/D value=-858993460 result=40 05:06:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:34 Parameters OK 05:06:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:34 Set A/D data flow result=40 05:06:34 Set A/D channel type result=40 05:06:34 Set A/D encoding result=40 05:06:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:34 Set channel filter=0.000000e+000 result=40 05:06:34 Config A/D Result=40 05:06:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:34 Get A/D filter: -9.255963e+061 result=40 05:06:34 Get A/D value=-858993460 result=40 05:06:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:34 Aux= 05:06:34 Message to Camera, serial 40369 queued 05:07:11 Received message from Master: op=PointingHead serial=40382 05:07:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:07:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:07:11 Point started: ret=0 05:07:11 point_skyscan result=0 05:07:12 Check angles 05:07:12 SkyScan query 05:07:12 SkyScan query done: ret=0 az=153.09<-10206 ze=6.51<-11566 Statuses=0009 0008 05:07:12 Msec=0 True Az=153.09 Ze=6.51 Az status=0009 Ze status=0008 05:07:13 Check angles 05:07:13 SkyScan query 05:07:13 SkyScan query done: ret=0 az=135.63<-9042 ze=6.495<-11567 Statuses=0009 0008 05:07:13 Msec=750 True Az=135.63 Ze=6.495 Az status=0009 Ze status=0008 05:07:13 Check angles 05:07:13 SkyScan query 05:07:14 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 05:07:14 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 05:07:14 Check angles 05:07:14 SkyScan query 05:07:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:07:15 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:07:15 Message to Master queued w/err=0: serial=40382 error=0 05:07:20 Received message from Master: op=Filter serial=40383 05:07:20 Color wheel filter change from 0 to 0 05:07:20 FLIGetFilterPos err=0 currentPosition=0 05:07:20 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:20 Filter is already there-color wheel unchanged 05:07:20 Received message from Master: op=Shutter serial=40384 05:07:20 Shutter LASER close 05:07:20 Received message from Camera: op=State serial=40386 05:07:20 GetSingleValue result=40 Value=cccccccc 05:07:20 SkyScan query 05:07:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:07:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:20 Parameters OK 05:07:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:20 Set A/D data flow result=40 05:07:20 Set A/D channel type result=40 05:07:20 Set A/D encoding result=40 05:07:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:20 Set channel filter=0.000000e+000 result=40 05:07:20 Config A/D Result=40 05:07:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:20 Get A/D filter: -9.255963e+061 result=40 05:07:20 Get A/D value=-858993460 result=40 05:07:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:20 Parameters OK 05:07:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:20 Set A/D data flow result=40 05:07:20 Set A/D channel type result=40 05:07:20 Set A/D encoding result=40 05:07:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:20 Set channel filter=0.000000e+000 result=40 05:07:20 Config A/D Result=40 05:07:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:20 Get A/D filter: -9.255963e+061 result=40 05:07:20 Get A/D value=-858993460 result=40 05:07:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:20 Aux= 05:07:20 Message to Camera, serial 40386 queued 05:07:57 Received message from Master: op=PointingHead serial=40399 05:07:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:07:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:07:58 Point started: ret=0 05:07:58 point_skyscan result=0 05:07:58 Check angles 05:07:58 SkyScan query 05:07:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 05:07:59 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 05:07:59 Check angles 05:07:59 SkyScan query 05:08:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 05:08:00 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 05:08:00 Check angles 05:08:00 SkyScan query 05:08:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.895<-16393 Statuses=0008 0009 05:08:00 Msec=1500 True Az=112.995 Ze=-65.895 Az status=0008 Ze status=0009 05:08:01 Check angles 05:08:01 SkyScan query 05:08:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.85<-17790 Statuses=0008 0009 05:08:01 Msec=2250 True Az=112.995 Ze=-86.85 Az status=0008 Ze status=0009 05:08:01 Check angles 05:08:01 SkyScan query 05:08:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 05:08:02 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 05:08:02 Check angles 05:08:02 SkyScan query 05:08:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 05:08:03 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 05:08:03 Check angles 05:08:03 SkyScan query 05:08:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.7<-21980 Statuses=0008 0009 05:08:03 Msec=4500 True Az=112.995 Ze=-149.7 Az status=0008 Ze status=0009 05:08:04 Check angles 05:08:04 SkyScan query 05:08:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0008 0009 05:08:04 Msec=5250 True Az=112.995 Ze=-170.97 Az status=0008 Ze status=0009 05:08:04 Check angles 05:08:04 SkyScan query 05:08:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:08:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:08:05 Message to Master queued w/err=0: serial=40399 error=0 05:08:10 Received message from Master: op=Filter serial=40400 05:08:10 Color wheel filter change from 0 to 0 05:08:10 FLIGetFilterPos err=0 currentPosition=0 05:08:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:10 Filter is already there-color wheel unchanged 05:08:10 Received message from Master: op=Shutter serial=40401 05:08:10 Shutter LASER open 05:08:10 Received message from Camera: op=State serial=40403 05:08:10 GetSingleValue result=40 Value=cccccccc 05:08:10 SkyScan query 05:08:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:08:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:11 Parameters OK 05:08:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:11 Set A/D data flow result=40 05:08:11 Set A/D channel type result=40 05:08:11 Set A/D encoding result=40 05:08:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:11 Set channel filter=0.000000e+000 result=40 05:08:11 Config A/D Result=40 05:08:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:11 Get A/D filter: -9.255963e+061 result=40 05:08:11 Get A/D value=-858993460 result=40 05:08:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:11 Parameters OK 05:08:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:11 Set A/D data flow result=40 05:08:11 Set A/D channel type result=40 05:08:11 Set A/D encoding result=40 05:08:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:11 Set channel filter=0.000000e+000 result=40 05:08:11 Config A/D Result=40 05:08:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:11 Get A/D filter: -9.255963e+061 result=40 05:08:11 Get A/D value=-858993460 result=40 05:08:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:11 Aux= 05:08:11 Message to Camera, serial 40403 queued 05:08:19 Received message from Master: op=Shutter serial=40413 05:08:19 Shutter LASER close 05:08:20 Received message from Master: op=PointingHead serial=40417 05:08:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:08:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:08:20 Point started: ret=0 05:08:20 point_skyscan result=0 05:08:21 Check angles 05:08:21 SkyScan query 05:08:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 05:08:21 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 05:08:22 Check angles 05:08:22 SkyScan query 05:08:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 05:08:22 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 05:08:22 Check angles 05:08:22 SkyScan query 05:08:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 05:08:23 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 05:08:23 Check angles 05:08:23 SkyScan query 05:08:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 05:08:24 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 05:08:24 Check angles 05:08:24 SkyScan query 05:08:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.61<-15974 Statuses=0008 0009 05:08:24 Msec=3000 True Az=112.995 Ze=-59.61 Az status=0008 Ze status=0009 05:08:25 Check angles 05:08:25 SkyScan query 05:08:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.655<-14577 Statuses=0008 0009 05:08:25 Msec=3750 True Az=112.995 Ze=-38.655 Az status=0008 Ze status=0009 05:08:25 Check angles 05:08:25 SkyScan query 05:08:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.7<-13180 Statuses=0008 0009 05:08:26 Msec=4500 True Az=112.995 Ze=-17.7 Az status=0008 Ze status=0009 05:08:26 Check angles 05:08:26 SkyScan query 05:08:27 SkyScan query done: ret=0 az=112.995<-7533 ze=3.255<-11783 Statuses=0008 0009 05:08:27 Msec=5250 True Az=112.995 Ze=3.255 Az status=0008 Ze status=0009 05:08:27 Check angles 05:08:27 SkyScan query 05:08:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:08:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:08:27 Message to Master queued w/err=0: serial=40417 error=0 05:08:32 Received message from Master: op=Filter serial=40418 05:08:32 Color wheel filter change from 0 to 0 05:08:32 FLIGetFilterPos err=0 currentPosition=0 05:08:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:32 Filter is already there-color wheel unchanged 05:08:33 Received message from Master: op=Shutter serial=40419 05:08:33 Shutter LASER close 05:08:33 Received message from Camera: op=State serial=40421 05:08:33 GetSingleValue result=40 Value=cccccccc 05:08:33 SkyScan query 05:08:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:08:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:33 Parameters OK 05:08:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:33 Set A/D data flow result=40 05:08:33 Set A/D channel type result=40 05:08:33 Set A/D encoding result=40 05:08:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:33 Set channel filter=0.000000e+000 result=40 05:08:33 Config A/D Result=40 05:08:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:33 Get A/D filter: -9.255963e+061 result=40 05:08:33 Get A/D value=-858993460 result=40 05:08:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:33 Parameters OK 05:08:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:33 Set A/D data flow result=40 05:08:33 Set A/D channel type result=40 05:08:33 Set A/D encoding result=40 05:08:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:33 Set channel filter=0.000000e+000 result=40 05:08:33 Config A/D Result=40 05:08:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:33 Get A/D filter: -9.255963e+061 result=40 05:08:33 Get A/D value=-858993460 result=40 05:08:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:33 Aux= 05:08:33 Message to Camera, serial 40421 queued 05:09:10 Received message from Master: op=PointingHead serial=40434 05:09:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:09:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:09:11 Point started: ret=0 05:09:11 point_skyscan result=0 05:09:11 Check angles 05:09:11 SkyScan query 05:09:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:09:12 Message to Master queued w/err=0: serial=40434 error=0 05:09:17 Received message from Master: op=Filter serial=40435 05:09:17 Color wheel filter change from 0 to 0 05:09:17 FLIGetFilterPos err=0 currentPosition=0 05:09:17 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:17 Filter is already there-color wheel unchanged 05:09:17 Received message from Master: op=Shutter serial=40436 05:09:17 Shutter LASER close 05:09:17 Received message from Camera: op=State serial=40438 05:09:17 GetSingleValue result=40 Value=cccccccc 05:09:17 SkyScan query 05:09:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:18 Parameters OK 05:09:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:18 Set A/D data flow result=40 05:09:18 Set A/D channel type result=40 05:09:18 Set A/D encoding result=40 05:09:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:18 Set channel filter=0.000000e+000 result=40 05:09:18 Config A/D Result=40 05:09:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:18 Get A/D filter: -9.255963e+061 result=40 05:09:18 Get A/D value=-858993460 result=40 05:09:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:18 Parameters OK 05:09:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:18 Set A/D data flow result=40 05:09:18 Set A/D channel type result=40 05:09:18 Set A/D encoding result=40 05:09:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:18 Set channel filter=0.000000e+000 result=40 05:09:18 Config A/D Result=40 05:09:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:18 Get A/D filter: -9.255963e+061 result=40 05:09:18 Get A/D value=-858993460 result=40 05:09:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:18 Aux= 05:09:18 Message to Camera, serial 40438 queued 05:09:55 Received message from Master: op=PointingHead serial=40451 05:09:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:09:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:09:55 Point started: ret=0 05:09:55 point_skyscan result=0 05:09:56 Check angles 05:09:56 SkyScan query 05:09:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:09:56 Message to Master queued w/err=0: serial=40451 error=0 05:10:01 Received message from Master: op=Filter serial=40452 05:10:01 Color wheel filter change from 0 to 0 05:10:01 FLIGetFilterPos err=0 currentPosition=0 05:10:01 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:01 Filter is already there-color wheel unchanged 05:10:01 Received message from Master: op=Shutter serial=40453 05:10:01 Shutter LASER close 05:10:01 Received message from Camera: op=State serial=40455 05:10:01 GetSingleValue result=40 Value=cccccccc 05:10:01 SkyScan query 05:10:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:10:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:02 Parameters OK 05:10:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:02 Set A/D data flow result=40 05:10:02 Set A/D channel type result=40 05:10:02 Set A/D encoding result=40 05:10:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:02 Set channel filter=0.000000e+000 result=40 05:10:02 Config A/D Result=40 05:10:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:02 Get A/D filter: -9.255963e+061 result=40 05:10:02 Get A/D value=-858993460 result=40 05:10:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:02 Parameters OK 05:10:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:02 Set A/D data flow result=40 05:10:02 Set A/D channel type result=40 05:10:02 Set A/D encoding result=40 05:10:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:02 Set channel filter=0.000000e+000 result=40 05:10:02 Config A/D Result=40 05:10:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:02 Get A/D filter: -9.255963e+061 result=40 05:10:02 Get A/D value=-858993460 result=40 05:10:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:02 Aux= 05:10:02 Message to Camera, serial 40455 queued 05:10:39 Received message from Master: op=PointingHead serial=40468 05:10:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:10:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:10:39 Point started: ret=0 05:10:39 point_skyscan result=0 05:10:40 Check angles 05:10:40 SkyScan query 05:10:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:10:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:10:41 Message to Master queued w/err=0: serial=40468 error=0 05:10:46 Received message from Master: op=Filter serial=40469 05:10:46 Color wheel filter change from 0 to 0 05:10:46 FLIGetFilterPos err=0 currentPosition=0 05:10:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:46 Filter is already there-color wheel unchanged 05:10:46 Received message from Master: op=Shutter serial=40470 05:10:46 Shutter LASER close 05:10:46 Received message from Camera: op=State serial=40472 05:10:46 GetSingleValue result=40 Value=cccccccc 05:10:46 SkyScan query 05:10:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:10:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:46 Parameters OK 05:10:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:46 Set A/D data flow result=40 05:10:46 Set A/D channel type result=40 05:10:46 Set A/D encoding result=40 05:10:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:46 Set channel filter=0.000000e+000 result=40 05:10:46 Config A/D Result=40 05:10:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:46 Get A/D filter: -9.255963e+061 result=40 05:10:46 Get A/D value=-858993460 result=40 05:10:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:46 Parameters OK 05:10:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:46 Set A/D data flow result=40 05:10:46 Set A/D channel type result=40 05:10:46 Set A/D encoding result=40 05:10:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:46 Set channel filter=0.000000e+000 result=40 05:10:46 Config A/D Result=40 05:10:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:46 Get A/D filter: -9.255963e+061 result=40 05:10:46 Get A/D value=-858993460 result=40 05:10:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:46 Aux= 05:10:46 Message to Camera, serial 40472 queued 05:11:23 Received message from Master: op=PointingHead serial=40485 05:11:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:11:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:11:23 Point started: ret=0 05:11:23 point_skyscan result=0 05:11:24 Check angles 05:11:24 SkyScan query 05:11:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 05:11:25 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 05:11:25 Check angles 05:11:25 SkyScan query 05:11:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 05:11:26 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 05:11:26 Check angles 05:11:26 SkyScan query 05:11:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 05:11:26 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 05:11:26 Check angles 05:11:26 SkyScan query 05:11:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.055<-17737 Statuses=0008 0009 05:11:27 Msec=2250 True Az=112.995 Ze=-86.055 Az status=0008 Ze status=0009 05:11:27 Check angles 05:11:27 SkyScan query 05:11:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.995<-19133 Statuses=0008 0009 05:11:28 Msec=3000 True Az=112.995 Ze=-106.995 Az status=0008 Ze status=0009 05:11:28 Check angles 05:11:28 SkyScan query 05:11:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 05:11:29 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 05:11:29 Check angles 05:11:29 SkyScan query 05:11:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.355<-21957 Statuses=0008 0009 05:11:29 Msec=4500 True Az=112.995 Ze=-149.355 Az status=0008 Ze status=0009 05:11:29 Check angles 05:11:29 SkyScan query 05:11:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.28<-23352 Statuses=0008 0009 05:11:30 Msec=5250 True Az=112.995 Ze=-170.28 Az status=0008 Ze status=0009 05:11:30 Check angles 05:11:30 SkyScan query 05:11:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:11:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:11:31 Message to Master queued w/err=0: serial=40485 error=0 05:11:36 Received message from Master: op=Filter serial=40486 05:11:36 Color wheel filter change from 0 to 0 05:11:36 FLIGetFilterPos err=0 currentPosition=0 05:11:36 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:36 Filter is already there-color wheel unchanged 05:11:36 Received message from Master: op=Shutter serial=40487 05:11:36 Shutter LASER open 05:11:36 Received message from Camera: op=State serial=40489 05:11:36 GetSingleValue result=40 Value=cccccccc 05:11:36 SkyScan query 05:11:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:11:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:37 Parameters OK 05:11:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:37 Set A/D data flow result=40 05:11:37 Set A/D channel type result=40 05:11:37 Set A/D encoding result=40 05:11:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:37 Set channel filter=0.000000e+000 result=40 05:11:37 Config A/D Result=40 05:11:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:37 Get A/D filter: -9.255963e+061 result=40 05:11:37 Get A/D value=-858993460 result=40 05:11:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:37 Parameters OK 05:11:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:37 Set A/D data flow result=40 05:11:37 Set A/D channel type result=40 05:11:37 Set A/D encoding result=40 05:11:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:37 Set channel filter=0.000000e+000 result=40 05:11:37 Config A/D Result=40 05:11:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:37 Get A/D filter: -9.255963e+061 result=40 05:11:37 Get A/D value=-858993460 result=40 05:11:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:37 Aux= 05:11:37 Message to Camera, serial 40489 queued 05:11:45 Received message from Master: op=Shutter serial=40499 05:11:45 Shutter LASER close 05:11:46 Received message from Master: op=PointingHead serial=40503 05:11:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:11:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:11:46 Point started: ret=0 05:11:46 point_skyscan result=0 05:11:47 Check angles 05:11:47 SkyScan query 05:11:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 05:11:47 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 05:11:48 Check angles 05:11:48 SkyScan query 05:11:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.37<-20158 Statuses=0008 0009 05:11:48 Msec=750 True Az=112.995 Ze=-122.37 Az status=0008 Ze status=0009 05:11:48 Check angles 05:11:48 SkyScan query 05:11:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.415<-18761 Statuses=0008 0009 05:11:49 Msec=1500 True Az=112.995 Ze=-101.415 Az status=0008 Ze status=0009 05:11:49 Check angles 05:11:49 SkyScan query 05:11:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 05:11:50 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 05:11:50 Check angles 05:11:50 SkyScan query 05:11:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 05:11:50 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 05:11:51 Check angles 05:11:51 SkyScan query 05:11:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.1<-14540 Statuses=0008 0009 05:11:51 Msec=3750 True Az=112.995 Ze=-38.1 Az status=0008 Ze status=0009 05:11:51 Check angles 05:11:51 SkyScan query 05:11:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.16<-13144 Statuses=0008 0009 05:11:52 Msec=4500 True Az=112.995 Ze=-17.16 Az status=0008 Ze status=0009 05:11:52 Check angles 05:11:52 SkyScan query 05:11:53 SkyScan query done: ret=0 az=112.995<-7533 ze=3.795<-11747 Statuses=0008 0009 05:11:53 Msec=5250 True Az=112.995 Ze=3.795 Az status=0008 Ze status=0009 05:11:53 Check angles 05:11:53 SkyScan query 05:11:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:11:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:11:53 Message to Master queued w/err=0: serial=40503 error=0 05:11:58 Received message from Master: op=Filter serial=40504 05:11:58 Color wheel filter change from 0 to 0 05:11:58 FLIGetFilterPos err=0 currentPosition=0 05:11:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:58 Filter is already there-color wheel unchanged 05:11:59 Received message from Master: op=Shutter serial=40505 05:11:59 Shutter LASER close 05:11:59 Received message from Camera: op=State serial=40507 05:11:59 GetSingleValue result=40 Value=cccccccc 05:11:59 SkyScan query 05:11:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:11:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:59 Parameters OK 05:11:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:59 Set A/D data flow result=40 05:11:59 Set A/D channel type result=40 05:11:59 Set A/D encoding result=40 05:11:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:59 Set channel filter=0.000000e+000 result=40 05:11:59 Config A/D Result=40 05:11:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:59 Get A/D filter: -9.255963e+061 result=40 05:11:59 Get A/D value=-858993460 result=40 05:11:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:59 Parameters OK 05:11:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:59 Set A/D data flow result=40 05:11:59 Set A/D channel type result=40 05:11:59 Set A/D encoding result=40 05:11:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:59 Set channel filter=0.000000e+000 result=40 05:11:59 Config A/D Result=40 05:11:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:59 Get A/D filter: -9.255963e+061 result=40 05:11:59 Get A/D value=-858993460 result=40 05:11:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:59 Aux= 05:11:59 Message to Camera, serial 40507 queued 05:12:36 Received message from Master: op=PointingHead serial=40520 05:12:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:12:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:12:37 Point started: ret=0 05:12:37 point_skyscan result=0 05:12:37 Check angles 05:12:37 SkyScan query 05:12:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:12:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:12:38 Message to Master queued w/err=0: serial=40520 error=0 05:12:43 Received message from Master: op=Filter serial=40521 05:12:43 Color wheel filter change from 0 to 0 05:12:43 FLIGetFilterPos err=0 currentPosition=0 05:12:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:43 Filter is already there-color wheel unchanged 05:12:43 Received message from Master: op=Shutter serial=40522 05:12:43 Shutter LASER close 05:12:43 Received message from Camera: op=State serial=40524 05:12:43 GetSingleValue result=40 Value=cccccccc 05:12:43 SkyScan query 05:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:12:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:44 Parameters OK 05:12:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:44 Set A/D data flow result=40 05:12:44 Set A/D channel type result=40 05:12:44 Set A/D encoding result=40 05:12:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:44 Set channel filter=0.000000e+000 result=40 05:12:44 Config A/D Result=40 05:12:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:44 Get A/D filter: -9.255963e+061 result=40 05:12:44 Get A/D value=-858993460 result=40 05:12:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:44 Parameters OK 05:12:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:44 Set A/D data flow result=40 05:12:44 Set A/D channel type result=40 05:12:44 Set A/D encoding result=40 05:12:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:44 Set channel filter=0.000000e+000 result=40 05:12:44 Config A/D Result=40 05:12:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:44 Get A/D filter: -9.255963e+061 result=40 05:12:44 Get A/D value=-858993460 result=40 05:12:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:44 Aux= 05:12:44 Message to Camera, serial 40524 queued 05:13:21 Received message from Master: op=PointingHead serial=40537 05:13:21 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:13:21 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:13:21 Point started: ret=0 05:13:21 point_skyscan result=0 05:13:22 Check angles 05:13:22 SkyScan query 05:13:22 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.495<-12433 Statuses=0009 0008 05:13:22 Msec=0 True Az=136.305 Ze=-6.495 Az status=0009 Ze status=0008 05:13:22 Check angles 05:13:22 SkyScan query 05:13:23 SkyScan query done: ret=0 az=153.81<-10254 ze=-6.48<-12432 Statuses=0009 0008 05:13:23 Msec=750 True Az=153.81 Ze=-6.48 Az status=0009 Ze status=0008 05:13:23 Check angles 05:13:23 SkyScan query 05:13:24 SkyScan query done: ret=0 az=171.27<-11418 ze=-6.48<-12432 Statuses=0009 0008 05:13:24 Msec=1500 True Az=171.27 Ze=-6.48 Az status=0009 Ze status=0008 05:13:24 Check angles 05:13:24 SkyScan query 05:13:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 05:13:24 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 05:13:24 Message to Master queued w/err=0: serial=40537 error=0 05:13:29 Received message from Master: op=Filter serial=40538 05:13:29 Color wheel filter change from 0 to 0 05:13:29 FLIGetFilterPos err=0 currentPosition=0 05:13:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:29 Filter is already there-color wheel unchanged 05:13:30 Received message from Master: op=Shutter serial=40539 05:13:30 Shutter LASER close 05:13:30 Received message from Camera: op=State serial=40541 05:13:30 GetSingleValue result=40 Value=cccccccc 05:13:30 SkyScan query 05:13:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 05:13:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:30 Parameters OK 05:13:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:30 Set A/D data flow result=40 05:13:30 Set A/D channel type result=40 05:13:30 Set A/D encoding result=40 05:13:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:30 Set channel filter=0.000000e+000 result=40 05:13:30 Config A/D Result=40 05:13:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:30 Get A/D filter: -9.255963e+061 result=40 05:13:30 Get A/D value=-858993460 result=40 05:13:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:30 Parameters OK 05:13:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:30 Set A/D data flow result=40 05:13:30 Set A/D channel type result=40 05:13:30 Set A/D encoding result=40 05:13:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:30 Set channel filter=0.000000e+000 result=40 05:13:30 Config A/D Result=40 05:13:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:30 Get A/D filter: -9.255963e+061 result=40 05:13:30 Get A/D value=-858993460 result=40 05:13:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:30 Aux= 05:13:30 Message to Camera, serial 40541 queued 05:14:07 Received message from Master: op=PointingHead serial=40554 05:14:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:14:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:14:07 Point started: ret=0 05:14:07 point_skyscan result=0 05:14:08 Check angles 05:14:08 SkyScan query 05:14:09 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 05:14:09 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 05:14:09 Check angles 05:14:09 SkyScan query 05:14:09 SkyScan query done: ret=0 az=135.42<-9028 ze=6.495<-11567 Statuses=0009 0008 05:14:09 Msec=750 True Az=135.42 Ze=6.495 Az status=0009 Ze status=0008 05:14:10 Check angles 05:14:10 SkyScan query 05:14:10 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 05:14:10 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 05:14:10 Check angles 05:14:10 SkyScan query 05:14:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:14:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:14:11 Message to Master queued w/err=0: serial=40554 error=0 05:14:16 Received message from Master: op=Filter serial=40555 05:14:16 Color wheel filter change from 0 to 0 05:14:16 FLIGetFilterPos err=0 currentPosition=0 05:14:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:16 Filter is already there-color wheel unchanged 05:14:16 Received message from Master: op=Shutter serial=40556 05:14:16 Shutter LASER close 05:14:16 Received message from Camera: op=State serial=40558 05:14:16 GetSingleValue result=40 Value=cccccccc 05:14:16 SkyScan query 05:14:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:14:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:17 Parameters OK 05:14:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:17 Set A/D data flow result=40 05:14:17 Set A/D channel type result=40 05:14:17 Set A/D encoding result=40 05:14:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:17 Set channel filter=0.000000e+000 result=40 05:14:17 Config A/D Result=40 05:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:17 Get A/D filter: -9.255963e+061 result=40 05:14:17 Get A/D value=-858993460 result=40 05:14:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:17 Parameters OK 05:14:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:17 Set A/D data flow result=40 05:14:17 Set A/D channel type result=40 [UTC 2019-3-1 05:14:17] 05:14:17 Set A/D encoding result=40 05:14:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:17 Set channel filter=0.000000e+000 result=40 05:14:17 Config A/D Result=40 05:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:17 Get A/D filter: -9.255963e+061 result=40 05:14:17 Get A/D value=-858993460 result=40 05:14:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:17 Aux= 05:14:17 Message to Camera, serial 40558 queued 05:14:53 Received message from Master: op=PointingHead serial=40570 05:14:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:14:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:14:53 Point started: ret=0 05:14:53 point_skyscan result=0 05:14:54 Check angles 05:14:54 SkyScan query 05:14:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 05:14:54 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 05:14:55 Check angles 05:14:55 SkyScan query 05:14:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 05:14:55 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 05:14:55 Check angles 05:14:55 SkyScan query 05:14:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 05:14:56 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 05:14:56 Check angles 05:14:56 SkyScan query 05:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.03<-17802 Statuses=0008 0009 05:14:57 Msec=2250 True Az=112.995 Ze=-87.03 Az status=0008 Ze status=0009 05:14:57 Check angles 05:14:57 SkyScan query 05:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 05:14:57 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 05:14:58 Check angles 05:14:58 SkyScan query 05:14:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.925<-20595 Statuses=0008 0009 05:14:58 Msec=3750 True Az=112.995 Ze=-128.925 Az status=0008 Ze status=0009 05:14:58 Check angles 05:14:58 SkyScan query 05:14:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.315<-22021 Statuses=0008 0009 05:14:59 Msec=4500 True Az=112.995 Ze=-150.315 Az status=0008 Ze status=0009 05:14:59 Check angles 05:14:59 SkyScan query 05:15:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0008 0009 05:15:00 Msec=5250 True Az=112.995 Ze=-171.105 Az status=0008 Ze status=0009 05:15:00 Check angles 05:15:00 SkyScan query 05:15:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:15:00 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:15:00 Message to Master queued w/err=0: serial=40570 error=0 05:15:05 Received message from Master: op=Filter serial=40571 05:15:05 Color wheel filter change from 0 to 0 05:15:05 FLIGetFilterPos err=0 currentPosition=0 05:15:05 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:05 Filter is already there-color wheel unchanged 05:15:06 Received message from Master: op=Shutter serial=40572 05:15:06 Shutter LASER open 05:15:06 Received message from Camera: op=State serial=40574 05:15:06 GetSingleValue result=40 Value=cccccccc 05:15:06 SkyScan query 05:15:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:15:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:06 Parameters OK 05:15:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:06 Set A/D data flow result=40 05:15:06 Set A/D channel type result=40 05:15:06 Set A/D encoding result=40 05:15:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:06 Set channel filter=0.000000e+000 result=40 05:15:06 Config A/D Result=40 05:15:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:06 Get A/D filter: -9.255963e+061 result=40 05:15:06 Get A/D value=-858993460 result=40 05:15:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:06 Parameters OK 05:15:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:06 Set A/D data flow result=40 05:15:06 Set A/D channel type result=40 05:15:06 Set A/D encoding result=40 05:15:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:06 Set channel filter=0.000000e+000 result=40 05:15:06 Config A/D Result=40 05:15:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:06 Get A/D filter: -9.255963e+061 result=40 05:15:06 Get A/D value=-858993460 result=40 05:15:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:06 Aux= 05:15:06 Message to Camera, serial 40574 queued 05:15:15 Received message from Master: op=Shutter serial=40584 05:15:15 Shutter LASER close 05:15:15 Received message from Master: op=PointingHead serial=40588 05:15:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:15:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:15:16 Point started: ret=0 05:15:16 point_skyscan result=0 05:15:16 Check angles 05:15:16 SkyScan query 05:15:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 05:15:17 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 05:15:17 Check angles 05:15:17 SkyScan query 05:15:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 05:15:18 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 05:15:18 Check angles 05:15:18 SkyScan query 05:15:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 05:15:18 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 05:15:19 Check angles 05:15:19 SkyScan query 05:15:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 05:15:19 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 05:15:19 Check angles 05:15:19 SkyScan query 05:15:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.995<-15933 Statuses=0008 0009 05:15:20 Msec=3000 True Az=112.995 Ze=-58.995 Az status=0008 Ze status=0009 05:15:20 Check angles 05:15:20 SkyScan query 05:15:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.025<-14535 Statuses=0008 0009 05:15:21 Msec=3750 True Az=112.995 Ze=-38.025 Az status=0008 Ze status=0009 05:15:21 Check angles 05:15:21 SkyScan query 05:15:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.07<-13138 Statuses=0008 0009 05:15:21 Msec=4500 True Az=112.995 Ze=-17.07 Az status=0008 Ze status=0009 05:15:22 Check angles 05:15:22 SkyScan query 05:15:22 SkyScan query done: ret=0 az=112.995<-7533 ze=3.885<-11741 Statuses=0008 0009 05:15:22 Msec=5250 True Az=112.995 Ze=3.885 Az status=0008 Ze status=0009 05:15:22 Check angles 05:15:22 SkyScan query 05:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:15:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:15:23 Message to Master queued w/err=0: serial=40588 error=0 05:15:28 Received message from Master: op=Filter serial=40589 05:15:28 Color wheel filter change from 0 to 0 05:15:28 FLIGetFilterPos err=0 currentPosition=0 05:15:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:28 Filter is already there-color wheel unchanged 05:15:28 Received message from Master: op=Shutter serial=40590 05:15:28 Shutter LASER close 05:15:28 Received message from Camera: op=State serial=40592 05:15:28 GetSingleValue result=40 Value=cccccccc 05:15:28 SkyScan query 05:15:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:15:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:29 Parameters OK 05:15:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:29 Set A/D data flow result=40 05:15:29 Set A/D channel type result=40 05:15:29 Set A/D encoding result=40 05:15:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:29 Set channel filter=0.000000e+000 result=40 05:15:29 Config A/D Result=40 05:15:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:29 Get A/D filter: -9.255963e+061 result=40 05:15:29 Get A/D value=-858993460 result=40 05:15:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:29 Parameters OK 05:15:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:29 Set A/D data flow result=40 05:15:29 Set A/D channel type result=40 05:15:29 Set A/D encoding result=40 05:15:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:29 Set channel filter=0.000000e+000 result=40 05:15:29 Config A/D Result=40 05:15:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:29 Get A/D filter: -9.255963e+061 result=40 05:15:29 Get A/D value=-858993460 result=40 05:15:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:29 Aux= 05:15:29 Message to Camera, serial 40592 queued 05:16:06 Received message from Master: op=PointingHead serial=40605 05:16:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:16:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:16:06 Point started: ret=0 05:16:06 point_skyscan result=0 05:16:07 Check angles 05:16:07 SkyScan query 05:16:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:16:07 Message to Master queued w/err=0: serial=40605 error=0 05:16:12 Received message from Master: op=Filter serial=40606 05:16:12 Color wheel filter change from 0 to 0 05:16:12 FLIGetFilterPos err=0 currentPosition=0 05:16:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:12 Filter is already there-color wheel unchanged 05:16:13 Received message from Master: op=Shutter serial=40607 05:16:13 Shutter LASER close 05:16:13 Received message from Camera: op=State serial=40609 05:16:13 GetSingleValue result=40 Value=cccccccc 05:16:13 SkyScan query 05:16:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:13 Parameters OK 05:16:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:13 Set A/D data flow result=40 05:16:13 Set A/D channel type result=40 05:16:13 Set A/D encoding result=40 05:16:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:13 Set channel filter=0.000000e+000 result=40 05:16:13 Config A/D Result=40 05:16:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:13 Get A/D filter: -9.255963e+061 result=40 05:16:13 Get A/D value=-858993460 result=40 05:16:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:13 Parameters OK 05:16:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:13 Set A/D data flow result=40 05:16:13 Set A/D channel type result=40 05:16:13 Set A/D encoding result=40 05:16:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:13 Set channel filter=0.000000e+000 result=40 05:16:13 Config A/D Result=40 05:16:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:13 Get A/D filter: -9.255963e+061 result=40 05:16:13 Get A/D value=-858993460 result=40 05:16:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:13 Aux= 05:16:13 Message to Camera, serial 40609 queued 05:16:50 Received message from Master: op=PointingHead serial=40622 05:16:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:16:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:16:50 Point started: ret=0 05:16:50 point_skyscan result=0 05:16:51 Check angles 05:16:51 SkyScan query 05:16:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:16:52 Message to Master queued w/err=0: serial=40622 error=0 05:16:57 Received message from Master: op=Filter serial=40623 05:16:57 Color wheel filter change from 0 to 0 05:16:57 FLIGetFilterPos err=0 currentPosition=0 05:16:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:57 Filter is already there-color wheel unchanged 05:16:57 Received message from Master: op=Shutter serial=40624 05:16:57 Shutter LASER close 05:16:57 Received message from Camera: op=State serial=40626 05:16:57 GetSingleValue result=40 Value=cccccccc 05:16:57 SkyScan query 05:16:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:57 Parameters OK 05:16:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:57 Set A/D data flow result=40 05:16:57 Set A/D channel type result=40 05:16:57 Set A/D encoding result=40 05:16:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:57 Set channel filter=0.000000e+000 result=40 05:16:57 Config A/D Result=40 05:16:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:57 Get A/D filter: -9.255963e+061 result=40 05:16:57 Get A/D value=-858993460 result=40 05:16:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:57 Parameters OK 05:16:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:57 Set A/D data flow result=40 05:16:57 Set A/D channel type result=40 05:16:57 Set A/D encoding result=40 05:16:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:57 Set channel filter=0.000000e+000 result=40 05:16:57 Config A/D Result=40 05:16:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:57 Get A/D filter: -9.255963e+061 result=40 05:16:57 Get A/D value=-858993460 result=40 05:16:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:57 Aux= 05:16:57 Message to Camera, serial 40626 queued 05:17:34 Received message from Master: op=PointingHead serial=40639 05:17:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:17:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:17:35 Point started: ret=0 05:17:35 point_skyscan result=0 05:17:35 Check angles 05:17:35 SkyScan query 05:17:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:17:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:17:36 Message to Master queued w/err=0: serial=40639 error=0 05:17:41 Received message from Master: op=Filter serial=40640 05:17:41 Color wheel filter change from 0 to 0 05:17:41 FLIGetFilterPos err=0 currentPosition=0 05:17:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:41 Filter is already there-color wheel unchanged 05:17:41 Received message from Master: op=Shutter serial=40641 05:17:41 Shutter LASER close 05:17:41 Received message from Camera: op=State serial=40643 05:17:41 GetSingleValue result=40 Value=cccccccc 05:17:41 SkyScan query 05:17:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:17:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:42 Parameters OK 05:17:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:42 Set A/D data flow result=40 05:17:42 Set A/D channel type result=40 05:17:42 Set A/D encoding result=40 05:17:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:42 Set channel filter=0.000000e+000 result=40 05:17:42 Config A/D Result=40 05:17:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:42 Get A/D filter: -9.255963e+061 result=40 05:17:42 Get A/D value=-858993460 result=40 05:17:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:42 Parameters OK 05:17:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:42 Set A/D data flow result=40 05:17:42 Set A/D channel type result=40 05:17:42 Set A/D encoding result=40 05:17:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:42 Set channel filter=0.000000e+000 result=40 05:17:42 Config A/D Result=40 05:17:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:42 Get A/D filter: -9.255963e+061 result=40 05:17:42 Get A/D value=-858993460 result=40 05:17:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:42 Aux= 05:17:42 Message to Camera, serial 40643 queued 05:18:19 Received message from Master: op=PointingHead serial=40656 05:18:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:18:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:18:19 Point started: ret=0 05:18:19 point_skyscan result=0 05:18:20 Check angles 05:18:20 SkyScan query 05:18:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 05:18:20 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 05:18:20 Check angles 05:18:20 SkyScan query 05:18:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.115<-14941 Statuses=0008 0009 05:18:21 Msec=750 True Az=112.995 Ze=-44.115 Az status=0008 Ze status=0009 05:18:21 Check angles 05:18:21 SkyScan query 05:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 05:18:22 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 05:18:22 Check angles 05:18:22 SkyScan query 05:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 05:18:22 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 05:18:23 Check angles 05:18:23 SkyScan query 05:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 05:18:23 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 05:18:23 Check angles 05:18:23 SkyScan query 05:18:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 05:18:24 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 05:18:24 Check angles 05:18:24 SkyScan query 05:18:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.18<-22012 Statuses=0008 0009 05:18:25 Msec=4500 True Az=112.995 Ze=-150.18 Az status=0008 Ze status=0009 05:18:25 Check angles 05:18:25 SkyScan query 05:18:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171<-23400 Statuses=0008 0009 05:18:26 Msec=5250 True Az=112.995 Ze=-171 Az status=0008 Ze status=0009 05:18:26 Check angles 05:18:26 SkyScan query 05:18:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:18:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:18:26 Message to Master queued w/err=0: serial=40656 error=0 05:18:31 Received message from Master: op=Filter serial=40657 05:18:31 Color wheel filter change from 0 to 0 05:18:31 FLIGetFilterPos err=0 currentPosition=0 05:18:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:31 Filter is already there-color wheel unchanged 05:18:31 Received message from Master: op=Shutter serial=40658 05:18:31 Shutter LASER open 05:18:32 Received message from Camera: op=State serial=40660 05:18:32 GetSingleValue result=40 Value=cccccccc 05:18:32 SkyScan query 05:18:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:18:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:32 Parameters OK 05:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:32 Set A/D data flow result=40 05:18:32 Set A/D channel type result=40 05:18:32 Set A/D encoding result=40 05:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:32 Set channel filter=0.000000e+000 result=40 05:18:32 Config A/D Result=40 05:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:32 Get A/D filter: -9.255963e+061 result=40 05:18:32 Get A/D value=-858993460 result=40 05:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:32 Parameters OK 05:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:32 Set A/D data flow result=40 05:18:32 Set A/D channel type result=40 05:18:32 Set A/D encoding result=40 05:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:32 Set channel filter=0.000000e+000 result=40 05:18:32 Config A/D Result=40 05:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:32 Get A/D filter: -9.255963e+061 result=40 05:18:32 Get A/D value=-858993460 result=40 05:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:32 Aux= 05:18:32 Message to Camera, serial 40660 queued 05:18:41 Received message from Master: op=Shutter serial=40670 05:18:41 Shutter LASER close 05:18:41 Received message from Master: op=PointingHead serial=40674 05:18:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:18:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:18:42 Point started: ret=0 05:18:42 point_skyscan result=0 05:18:42 Check angles 05:18:42 SkyScan query 05:18:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.755<-21517 Statuses=0008 0009 05:18:43 Msec=0 True Az=112.995 Ze=-142.755 Az status=0008 Ze status=0009 05:18:43 Check angles 05:18:43 SkyScan query 05:18:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 05:18:44 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 05:18:44 Check angles 05:18:44 SkyScan query 05:18:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 05:18:44 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 05:18:45 Check angles 05:18:45 SkyScan query 05:18:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 05:18:45 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 05:18:45 Check angles 05:18:45 SkyScan query 05:18:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.02<-15868 Statuses=0008 0009 05:18:46 Msec=3000 True Az=112.995 Ze=-58.02 Az status=0008 Ze status=0009 05:18:46 Check angles 05:18:46 SkyScan query 05:18:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.11<-14474 Statuses=0008 0009 05:18:47 Msec=3750 True Az=112.995 Ze=-37.11 Az status=0008 Ze status=0009 05:18:47 Check angles 05:18:47 SkyScan query 05:18:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.125<-13075 Statuses=0008 0009 05:18:48 Msec=4500 True Az=112.995 Ze=-16.125 Az status=0008 Ze status=0009 05:18:48 Check angles 05:18:48 SkyScan query 05:18:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 05:18:48 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 05:18:48 Check angles 05:18:48 SkyScan query 05:18:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:18:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:18:49 Message to Master queued w/err=0: serial=40674 error=0 05:18:54 Received message from Master: op=Filter serial=40675 05:18:54 Color wheel filter change from 0 to 0 05:18:54 FLIGetFilterPos err=0 currentPosition=0 05:18:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:54 Filter is already there-color wheel unchanged 05:18:54 Received message from Master: op=Shutter serial=40676 05:18:54 Shutter LASER close 05:18:54 Received message from Camera: op=State serial=40678 05:18:54 GetSingleValue result=40 Value=cccccccc 05:18:54 SkyScan query 05:18:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:18:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:55 Parameters OK 05:18:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:55 Set A/D data flow result=40 05:18:55 Set A/D channel type result=40 05:18:55 Set A/D encoding result=40 05:18:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:55 Set channel filter=0.000000e+000 result=40 05:18:55 Config A/D Result=40 05:18:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:55 Get A/D filter: -9.255963e+061 result=40 05:18:55 Get A/D value=-858993460 result=40 05:18:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:55 Parameters OK 05:18:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:55 Set A/D data flow result=40 05:18:55 Set A/D channel type result=40 05:18:55 Set A/D encoding result=40 05:18:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:55 Set channel filter=0.000000e+000 result=40 05:18:55 Config A/D Result=40 05:18:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:55 Get A/D filter: -9.255963e+061 result=40 05:18:55 Get A/D value=-858993460 result=40 05:18:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:55 Aux= 05:18:55 Message to Camera, serial 40678 queued 05:19:32 Received message from Master: op=PointingHead serial=40691 05:19:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:19:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:19:32 Point started: ret=0 05:19:32 point_skyscan result=0 05:19:33 Check angles 05:19:33 SkyScan query 05:19:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:19:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:19:33 Message to Master queued w/err=0: serial=40691 error=0 05:19:38 Received message from Master: op=Filter serial=40692 05:19:38 Color wheel filter change from 0 to 0 05:19:38 FLIGetFilterPos err=0 currentPosition=0 05:19:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:38 Filter is already there-color wheel unchanged 05:19:39 Received message from Master: op=Shutter serial=40693 05:19:39 Shutter LASER close 05:19:39 Received message from Camera: op=State serial=40695 05:19:39 GetSingleValue result=40 Value=cccccccc 05:19:39 SkyScan query 05:19:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:19:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:39 Parameters OK 05:19:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:39 Set A/D data flow result=40 05:19:39 Set A/D channel type result=40 05:19:39 Set A/D encoding result=40 05:19:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:39 Set channel filter=0.000000e+000 result=40 05:19:39 Config A/D Result=40 05:19:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:39 Get A/D filter: -9.255963e+061 result=40 05:19:39 Get A/D value=-858993460 result=40 05:19:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:39 Parameters OK 05:19:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:39 Set A/D data flow result=40 05:19:39 Set A/D channel type result=40 05:19:39 Set A/D encoding result=40 05:19:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:39 Set channel filter=0.000000e+000 result=40 05:19:39 Config A/D Result=40 05:19:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:39 Get A/D filter: -9.255963e+061 result=40 05:19:39 Get A/D value=-858993460 result=40 05:19:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:39 Aux= 05:19:39 Message to Camera, serial 40695 queued 05:20:16 Received message from Master: op=PointingHead serial=40708 05:20:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:20:16 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:20:16 Point started: ret=0 05:20:16 point_skyscan result=0 05:20:17 Check angles 05:20:17 SkyScan query 05:20:18 SkyScan query done: ret=0 az=136.515<-9101 ze=-6.51<-12434 Statuses=0009 0008 05:20:18 Msec=0 True Az=136.515 Ze=-6.51 Az status=0009 Ze status=0008 05:20:18 Check angles 05:20:18 SkyScan query 05:20:19 SkyScan query done: ret=0 az=154.41<-10294 ze=-6.495<-12433 Statuses=0009 0008 05:20:19 Msec=750 True Az=154.41 Ze=-6.495 Az status=0009 Ze status=0008 05:20:19 Check angles 05:20:19 SkyScan query 05:20:19 SkyScan query done: ret=0 az=171.81<-11454 ze=-6.495<-12433 Statuses=0009 0008 05:20:19 Msec=1500 True Az=171.81 Ze=-6.495 Az status=0009 Ze status=0008 05:20:19 Check angles 05:20:19 SkyScan query 05:20:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:20:20 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:20:20 Message to Master queued w/err=0: serial=40708 error=0 05:20:25 Received message from Master: op=Filter serial=40709 05:20:25 Color wheel filter change from 0 to 0 05:20:25 FLIGetFilterPos err=0 currentPosition=0 05:20:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:25 Filter is already there-color wheel unchanged 05:20:25 Received message from Master: op=Shutter serial=40710 05:20:25 Shutter LASER close 05:20:25 Received message from Camera: op=State serial=40712 05:20:25 GetSingleValue result=40 Value=cccccccc 05:20:25 SkyScan query 05:20:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:20:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:26 Parameters OK 05:20:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:26 Set A/D data flow result=40 05:20:26 Set A/D channel type result=40 05:20:26 Set A/D encoding result=40 05:20:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:26 Set channel filter=0.000000e+000 result=40 05:20:26 Config A/D Result=40 05:20:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:26 Get A/D filter: -9.255963e+061 result=40 05:20:26 Get A/D value=-858993460 result=40 05:20:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:26 Parameters OK 05:20:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:26 Set A/D data flow result=40 05:20:26 Set A/D channel type result=40 05:20:26 Set A/D encoding result=40 05:20:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:26 Set channel filter=0.000000e+000 result=40 05:20:26 Config A/D Result=40 05:20:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:26 Get A/D filter: -9.255963e+061 result=40 05:20:26 Get A/D value=-858993460 result=40 05:20:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:26 Aux= 05:20:26 Message to Camera, serial 40712 queued 05:21:03 Received message from Master: op=PointingHead serial=40725 05:21:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:21:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:21:03 Point started: ret=0 05:21:03 point_skyscan result=0 05:21:04 Check angles 05:21:04 SkyScan query 05:21:04 SkyScan query done: ret=0 az=153.09<-10206 ze=6.51<-11566 Statuses=0009 0008 05:21:04 Msec=0 True Az=153.09 Ze=6.51 Az status=0009 Ze status=0008 05:21:05 Check angles 05:21:05 SkyScan query 05:21:05 SkyScan query done: ret=0 az=135.615<-9041 ze=6.495<-11567 Statuses=0009 0008 05:21:05 Msec=750 True Az=135.615 Ze=6.495 Az status=0009 Ze status=0008 05:21:05 Check angles 05:21:05 SkyScan query 05:21:06 SkyScan query done: ret=0 az=118.11<-7874 ze=6.495<-11567 Statuses=0009 0008 05:21:06 Msec=1500 True Az=118.11 Ze=6.495 Az status=0009 Ze status=0008 05:21:06 Check angles 05:21:06 SkyScan query 05:21:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:21:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:21:07 Message to Master queued w/err=0: serial=40725 error=0 05:21:12 Received message from Master: op=Filter serial=40726 05:21:12 Color wheel filter change from 0 to 0 05:21:12 FLIGetFilterPos err=0 currentPosition=0 05:21:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:12 Filter is already there-color wheel unchanged 05:21:12 Received message from Master: op=Shutter serial=40727 05:21:12 Shutter LASER close 05:21:12 Received message from Camera: op=State serial=40729 05:21:12 GetSingleValue result=40 Value=cccccccc 05:21:12 SkyScan query 05:21:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:21:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:12 Parameters OK 05:21:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:12 Set A/D data flow result=40 05:21:12 Set A/D channel type result=40 05:21:12 Set A/D encoding result=40 05:21:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:12 Set channel filter=0.000000e+000 result=40 05:21:12 Config A/D Result=40 05:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:12 Get A/D filter: -9.255963e+061 result=40 05:21:12 Get A/D value=-858993460 result=40 05:21:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:12 Parameters OK 05:21:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:12 Set A/D data flow result=40 05:21:12 Set A/D channel type result=40 05:21:12 Set A/D encoding result=40 05:21:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:12 Set channel filter=0.000000e+000 result=40 05:21:12 Config A/D Result=40 05:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:12 Get A/D filter: -9.255963e+061 result=40 05:21:12 Get A/D value=-858993460 result=40 05:21:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:12 Aux= 05:21:12 Message to Camera, serial 40729 queued 05:21:49 Received message from Master: op=PointingHead serial=40742 05:21:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:21:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:21:50 Point started: ret=0 05:21:50 point_skyscan result=0 05:21:50 Check angles 05:21:50 SkyScan query 05:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.85<-13590 Statuses=0008 0009 05:21:51 Msec=0 True Az=112.995 Ze=-23.85 Az status=0008 Ze status=0009 05:21:51 Check angles 05:21:51 SkyScan query 05:21:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.24<-15016 Statuses=0008 0009 05:21:52 Msec=750 True Az=112.995 Ze=-45.24 Az status=0008 Ze status=0009 05:21:52 Check angles 05:21:52 SkyScan query 05:21:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.195<-16413 Statuses=0008 0009 05:21:52 Msec=1500 True Az=112.995 Ze=-66.195 Az status=0008 Ze status=0009 05:21:53 Check angles 05:21:53 SkyScan query 05:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.15<-17810 Statuses=0008 0009 05:21:53 Msec=2250 True Az=112.995 Ze=-87.15 Az status=0008 Ze status=0009 05:21:53 Check angles 05:21:53 SkyScan query 05:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.51<-19234 Statuses=0008 0009 05:21:54 Msec=3000 True Az=112.995 Ze=-108.51 Az status=0008 Ze status=0009 05:21:54 Check angles 05:21:54 SkyScan query 05:21:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.48<-20632 Statuses=0008 0009 05:21:55 Msec=3750 True Az=112.995 Ze=-129.48 Az status=0008 Ze status=0009 05:21:55 Check angles 05:21:55 SkyScan query 05:21:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.435<-22029 Statuses=0008 0009 05:21:55 Msec=4500 True Az=112.995 Ze=-150.435 Az status=0008 Ze status=0009 05:21:56 Check angles 05:21:56 SkyScan query 05:21:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0008 0009 05:21:56 Msec=5250 True Az=112.995 Ze=-171.21 Az status=0008 Ze status=0009 05:21:56 Check angles 05:21:56 SkyScan query 05:21:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:21:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:21:57 Message to Master queued w/err=0: serial=40742 error=0 05:22:02 Received message from Master: op=Filter serial=40743 05:22:02 Color wheel filter change from 0 to 0 05:22:02 FLIGetFilterPos err=0 currentPosition=0 05:22:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:02 Filter is already there-color wheel unchanged 05:22:02 Received message from Master: op=Shutter serial=40744 05:22:02 Shutter LASER open 05:22:02 Received message from Camera: op=State serial=40746 05:22:02 GetSingleValue result=40 Value=cccccccc 05:22:02 SkyScan query 05:22:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:22:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:03 Parameters OK 05:22:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:03 Set A/D data flow result=40 05:22:03 Set A/D channel type result=40 05:22:03 Set A/D encoding result=40 05:22:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:03 Set channel filter=0.000000e+000 result=40 05:22:03 Config A/D Result=40 05:22:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:03 Get A/D filter: -9.255963e+061 result=40 05:22:03 Get A/D value=-858993460 result=40 05:22:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:03 Parameters OK 05:22:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:03 Set A/D data flow result=40 05:22:03 Set A/D channel type result=40 05:22:03 Set A/D encoding result=40 05:22:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:03 Set channel filter=0.000000e+000 result=40 05:22:03 Config A/D Result=40 05:22:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:03 Get A/D filter: -9.255963e+061 result=40 05:22:03 Get A/D value=-858993460 result=40 05:22:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:03 Aux= 05:22:03 Message to Camera, serial 40746 queued 05:22:11 Received message from Master: op=Shutter serial=40756 05:22:11 Shutter LASER close 05:22:12 Received message from Master: op=PointingHead serial=40760 05:22:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:22:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:22:12 Point started: ret=0 05:22:12 point_skyscan result=0 05:22:13 Check angles 05:22:13 SkyScan query 05:22:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 05:22:13 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 05:22:14 Check angles 05:22:14 SkyScan query 05:22:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.47<-20098 Statuses=0008 0009 05:22:14 Msec=750 True Az=112.995 Ze=-121.47 Az status=0008 Ze status=0009 05:22:14 Check angles 05:22:14 SkyScan query 05:22:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 05:22:15 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 05:22:15 Check angles 05:22:15 SkyScan query 05:22:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.545<-17303 Statuses=0008 0009 05:22:16 Msec=2250 True Az=112.995 Ze=-79.545 Az status=0008 Ze status=0009 05:22:16 Check angles 05:22:16 SkyScan query 05:22:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.125<-15875 Statuses=0008 0009 05:22:16 Msec=3000 True Az=112.995 Ze=-58.125 Az status=0008 Ze status=0009 05:22:17 Check angles 05:22:17 SkyScan query 05:22:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.2<-14480 Statuses=0008 0009 05:22:17 Msec=3750 True Az=112.995 Ze=-37.2 Az status=0008 Ze status=0009 05:22:17 Check angles 05:22:17 SkyScan query 05:22:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.23<-13082 Statuses=0008 0009 05:22:18 Msec=4500 True Az=112.995 Ze=-16.23 Az status=0008 Ze status=0009 05:22:18 Check angles 05:22:18 SkyScan query 05:22:19 SkyScan query done: ret=0 az=112.995<-7533 ze=4.575<-11695 Statuses=0008 0009 05:22:19 Msec=5250 True Az=112.995 Ze=4.575 Az status=0008 Ze status=0009 05:22:19 Check angles 05:22:19 SkyScan query 05:22:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:22:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:22:19 Message to Master queued w/err=0: serial=40760 error=0 05:22:24 Received message from Master: op=Filter serial=40761 05:22:24 Color wheel filter change from 0 to 0 05:22:24 FLIGetFilterPos err=0 currentPosition=0 05:22:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:24 Filter is already there-color wheel unchanged 05:22:25 Received message from Master: op=Shutter serial=40762 05:22:25 Shutter LASER close 05:22:25 Received message from Camera: op=State serial=40764 05:22:25 GetSingleValue result=40 Value=cccccccc 05:22:25 SkyScan query 05:22:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:22:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:25 Parameters OK 05:22:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:25 Set A/D data flow result=40 05:22:25 Set A/D channel type result=40 05:22:25 Set A/D encoding result=40 05:22:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:25 Set channel filter=0.000000e+000 result=40 05:22:25 Config A/D Result=40 05:22:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:25 Get A/D filter: -9.255963e+061 result=40 05:22:25 Get A/D value=-858993460 result=40 05:22:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:25 Parameters OK 05:22:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:25 Set A/D data flow result=40 05:22:25 Set A/D channel type result=40 05:22:25 Set A/D encoding result=40 05:22:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:25 Set channel filter=0.000000e+000 result=40 05:22:25 Config A/D Result=40 05:22:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:25 Get A/D filter: -9.255963e+061 result=40 05:22:25 Get A/D value=-858993460 result=40 05:22:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:25 Aux= 05:22:25 Message to Camera, serial 40764 queued 05:23:02 Received message from Master: op=PointingHead serial=40777 05:23:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:23:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:23:03 Point started: ret=0 05:23:03 point_skyscan result=0 05:23:03 Check angles 05:23:03 SkyScan query 05:23:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:23:04 Message to Master queued w/err=0: serial=40777 error=0 05:23:09 Received message from Master: op=Filter serial=40778 05:23:09 Color wheel filter change from 0 to 0 05:23:09 FLIGetFilterPos err=0 currentPosition=0 05:23:09 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:09 Filter is already there-color wheel unchanged 05:23:09 Received message from Master: op=Shutter serial=40779 05:23:09 Shutter LASER close 05:23:09 Received message from Camera: op=State serial=40781 05:23:09 GetSingleValue result=40 Value=cccccccc 05:23:09 SkyScan query 05:23:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:10 Parameters OK 05:23:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:10 Set A/D data flow result=40 05:23:10 Set A/D channel type result=40 05:23:10 Set A/D encoding result=40 05:23:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:10 Set channel filter=0.000000e+000 result=40 05:23:10 Config A/D Result=40 05:23:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:10 Get A/D filter: -9.255963e+061 result=40 05:23:10 Get A/D value=-858993460 result=40 05:23:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:10 Parameters OK 05:23:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:10 Set A/D data flow result=40 05:23:10 Set A/D channel type result=40 05:23:10 Set A/D encoding result=40 05:23:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:10 Set channel filter=0.000000e+000 result=40 05:23:10 Config A/D Result=40 05:23:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:10 Get A/D filter: -9.255963e+061 result=40 05:23:10 Get A/D value=-858993460 result=40 05:23:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:10 Aux= 05:23:10 Message to Camera, serial 40781 queued 05:23:47 Received message from Master: op=PointingHead serial=40794 05:23:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:23:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:23:47 Point started: ret=0 05:23:47 point_skyscan result=0 05:23:48 Check angles 05:23:48 SkyScan query 05:23:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:23:48 Message to Master queued w/err=0: serial=40794 error=0 [UTC 2019-3-1 05:23:50] 05:23:53 Received message from Master: op=Filter serial=40795 05:23:53 Color wheel filter change from 0 to 0 05:23:53 FLIGetFilterPos err=0 currentPosition=0 05:23:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:53 Filter is already there-color wheel unchanged 05:23:53 Received message from Master: op=Shutter serial=40796 05:23:53 Shutter LASER close 05:23:53 Received message from Camera: op=State serial=40798 05:23:53 GetSingleValue result=40 Value=cccccccc 05:23:53 SkyScan query 05:23:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:54 Parameters OK 05:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:54 Set A/D data flow result=40 05:23:54 Set A/D channel type result=40 05:23:54 Set A/D encoding result=40 05:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:54 Set channel filter=0.000000e+000 result=40 05:23:54 Config A/D Result=40 05:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:54 Get A/D filter: -9.255963e+061 result=40 05:23:54 Get A/D value=-858993460 result=40 05:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:54 Parameters OK 05:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:54 Set A/D data flow result=40 05:23:54 Set A/D channel type result=40 05:23:54 Set A/D encoding result=40 05:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:54 Set channel filter=0.000000e+000 result=40 05:23:54 Config A/D Result=40 05:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:54 Get A/D filter: -9.255963e+061 result=40 05:23:54 Get A/D value=-858993460 result=40 05:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:54 Aux= 05:23:54 Message to Camera, serial 40798 queued 05:24:31 Received message from Master: op=PointingHead serial=40811 05:24:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:24:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:24:31 Point started: ret=0 05:24:31 point_skyscan result=0 05:24:32 Check angles 05:24:32 SkyScan query 05:24:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:24:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:24:33 Message to Master queued w/err=0: serial=40811 error=0 05:24:38 Received message from Master: op=Filter serial=40812 05:24:38 Color wheel filter change from 0 to 0 05:24:38 FLIGetFilterPos err=0 currentPosition=0 05:24:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:38 Filter is already there-color wheel unchanged 05:24:38 Received message from Master: op=Shutter serial=40813 05:24:38 Shutter LASER close 05:24:38 Received message from Camera: op=State serial=40815 05:24:38 GetSingleValue result=40 Value=cccccccc 05:24:38 SkyScan query 05:24:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:24:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:38 Parameters OK 05:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:38 Set A/D data flow result=40 05:24:38 Set A/D channel type result=40 05:24:38 Set A/D encoding result=40 05:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:38 Set channel filter=0.000000e+000 result=40 05:24:38 Config A/D Result=40 05:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:38 Get A/D filter: -9.255963e+061 result=40 05:24:38 Get A/D value=-858993460 result=40 05:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:38 Parameters OK 05:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:38 Set A/D data flow result=40 05:24:38 Set A/D channel type result=40 05:24:38 Set A/D encoding result=40 05:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:38 Set channel filter=0.000000e+000 result=40 05:24:38 Config A/D Result=40 05:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:38 Get A/D filter: -9.255963e+061 result=40 05:24:38 Get A/D value=-858993460 result=40 05:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:38 Aux= 05:24:38 Message to Camera, serial 40815 queued 05:25:15 Received message from Master: op=PointingHead serial=40828 05:25:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:25:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:25:15 Point started: ret=0 05:25:15 point_skyscan result=0 05:25:16 Check angles 05:25:16 SkyScan query 05:25:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 05:25:17 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 05:25:17 Check angles 05:25:17 SkyScan query 05:25:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 05:25:18 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 05:25:18 Check angles 05:25:18 SkyScan query 05:25:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 05:25:18 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 05:25:18 Check angles 05:25:18 SkyScan query 05:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.175<-17745 Statuses=0008 0009 05:25:19 Msec=2250 True Az=112.995 Ze=-86.175 Az status=0008 Ze status=0009 05:25:19 Check angles 05:25:19 SkyScan query 05:25:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.115<-19141 Statuses=0008 0009 05:25:20 Msec=3000 True Az=112.995 Ze=-107.115 Az status=0008 Ze status=0009 05:25:20 Check angles 05:25:20 SkyScan query 05:25:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.07<-20538 Statuses=0008 0009 05:25:21 Msec=3750 True Az=112.995 Ze=-128.07 Az status=0008 Ze status=0009 05:25:21 Check angles 05:25:21 SkyScan query 05:25:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.04<-21936 Statuses=0008 0009 05:25:21 Msec=4500 True Az=112.995 Ze=-149.04 Az status=0008 Ze status=0009 05:25:21 Check angles 05:25:21 SkyScan query 05:25:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.98<-23332 Statuses=0008 0009 05:25:22 Msec=5250 True Az=112.995 Ze=-169.98 Az status=0008 Ze status=0009 05:25:22 Check angles 05:25:22 SkyScan query 05:25:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:25:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:25:23 Message to Master queued w/err=0: serial=40828 error=0 05:25:28 Received message from Master: op=Filter serial=40829 05:25:28 Color wheel filter change from 0 to 0 05:25:28 FLIGetFilterPos err=0 currentPosition=0 05:25:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:28 Filter is already there-color wheel unchanged 05:25:28 Received message from Master: op=Shutter serial=40830 05:25:28 Shutter LASER open 05:25:28 Received message from Camera: op=State serial=40832 05:25:28 GetSingleValue result=40 Value=cccccccc 05:25:28 SkyScan query 05:25:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:25:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:29 Parameters OK 05:25:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:29 Set A/D data flow result=40 05:25:29 Set A/D channel type result=40 05:25:29 Set A/D encoding result=40 05:25:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:29 Set channel filter=0.000000e+000 result=40 05:25:29 Config A/D Result=40 05:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:29 Get A/D filter: -9.255963e+061 result=40 05:25:29 Get A/D value=-858993460 result=40 05:25:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:29 Parameters OK 05:25:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:29 Set A/D data flow result=40 05:25:29 Set A/D channel type result=40 05:25:29 Set A/D encoding result=40 05:25:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:29 Set channel filter=0.000000e+000 result=40 05:25:29 Config A/D Result=40 05:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:29 Get A/D filter: -9.255963e+061 result=40 05:25:29 Get A/D value=-858993460 result=40 05:25:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:29 Aux= 05:25:29 Message to Camera, serial 40832 queued 05:25:37 Received message from Master: op=Shutter serial=40842 05:25:37 Shutter LASER close 05:25:38 Received message from Master: op=PointingHead serial=40846 05:25:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:25:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:25:38 Point started: ret=0 05:25:38 point_skyscan result=0 05:25:39 Check angles 05:25:39 SkyScan query 05:25:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 05:25:39 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 05:25:40 Check angles 05:25:40 SkyScan query 05:25:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 05:25:40 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 05:25:40 Check angles 05:25:40 SkyScan query 05:25:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 05:25:41 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 05:25:41 Check angles 05:25:41 SkyScan query 05:25:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.49<-17366 Statuses=0008 0009 05:25:42 Msec=2250 True Az=112.995 Ze=-80.49 Az status=0008 Ze status=0009 05:25:42 Check angles 05:25:42 SkyScan query 05:25:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.55<-15970 Statuses=0008 0009 05:25:42 Msec=3000 True Az=112.995 Ze=-59.55 Az status=0008 Ze status=0009 05:25:43 Check angles 05:25:43 SkyScan query 05:25:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.58<-14572 Statuses=0008 0009 05:25:43 Msec=3750 True Az=112.995 Ze=-38.58 Az status=0008 Ze status=0009 05:25:43 Check angles 05:25:43 SkyScan query 05:25:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.625<-13175 Statuses=0008 0009 05:25:44 Msec=4500 True Az=112.995 Ze=-17.625 Az status=0008 Ze status=0009 05:25:44 Check angles 05:25:44 SkyScan query 05:25:45 SkyScan query done: ret=0 az=112.995<-7533 ze=3.315<-11779 Statuses=0008 0009 05:25:45 Msec=5250 True Az=112.995 Ze=3.315 Az status=0008 Ze status=0009 05:25:45 Check angles 05:25:45 SkyScan query 05:25:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:25:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:25:45 Message to Master queued w/err=0: serial=40846 error=0 05:25:50 Received message from Master: op=Filter serial=40847 05:25:50 Color wheel filter change from 0 to 0 05:25:50 FLIGetFilterPos err=0 currentPosition=0 05:25:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:50 Filter is already there-color wheel unchanged 05:25:51 Received message from Master: op=Shutter serial=40848 05:25:51 Shutter LASER close 05:25:51 Received message from Camera: op=State serial=40850 05:25:51 GetSingleValue result=40 Value=cccccccc 05:25:51 SkyScan query 05:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:25:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:51 Parameters OK 05:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:51 Set A/D data flow result=40 05:25:51 Set A/D channel type result=40 05:25:51 Set A/D encoding result=40 05:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:51 Set channel filter=0.000000e+000 result=40 05:25:51 Config A/D Result=40 05:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:51 Get A/D filter: -9.255963e+061 result=40 05:25:51 Get A/D value=-858993460 result=40 05:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:51 Parameters OK 05:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:51 Set A/D data flow result=40 05:25:51 Set A/D channel type result=40 05:25:51 Set A/D encoding result=40 05:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:51 Set channel filter=0.000000e+000 result=40 05:25:51 Config A/D Result=40 05:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:51 Get A/D filter: -9.255963e+061 result=40 05:25:51 Get A/D value=-858993460 result=40 05:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:51 Aux= 05:25:51 Message to Camera, serial 40850 queued 05:26:28 Received message from Master: op=PointingHead serial=40863 05:26:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:26:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:26:29 Point started: ret=0 05:26:29 point_skyscan result=0 05:26:29 Check angles 05:26:29 SkyScan query 05:26:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:26:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:26:30 Message to Master queued w/err=0: serial=40863 error=0 05:26:35 Received message from Master: op=Filter serial=40864 05:26:35 Color wheel filter change from 0 to 0 05:26:35 FLIGetFilterPos err=0 currentPosition=0 05:26:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:35 Filter is already there-color wheel unchanged 05:26:35 Received message from Master: op=Shutter serial=40865 05:26:35 Shutter LASER close 05:26:35 Received message from Camera: op=State serial=40867 05:26:35 GetSingleValue result=40 Value=cccccccc 05:26:35 SkyScan query 05:26:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:26:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:36 Parameters OK 05:26:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:36 Set A/D data flow result=40 05:26:36 Set A/D channel type result=40 05:26:36 Set A/D encoding result=40 05:26:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:36 Set channel filter=0.000000e+000 result=40 05:26:36 Config A/D Result=40 05:26:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:36 Get A/D filter: -9.255963e+061 result=40 05:26:36 Get A/D value=-858993460 result=40 05:26:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:36 Parameters OK 05:26:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:36 Set A/D data flow result=40 05:26:36 Set A/D channel type result=40 05:26:36 Set A/D encoding result=40 05:26:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:36 Set channel filter=0.000000e+000 result=40 05:26:36 Config A/D Result=40 05:26:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:36 Get A/D filter: -9.255963e+061 result=40 05:26:36 Get A/D value=-858993460 result=40 05:26:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:36 Aux= 05:26:36 Message to Camera, serial 40867 queued 05:27:12 Received message from Master: op=PointingHead serial=40880 05:27:12 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:27:12 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:27:13 Point started: ret=0 05:27:13 point_skyscan result=0 05:27:14 Check angles 05:27:14 SkyScan query 05:27:14 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 05:27:14 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 05:27:14 Check angles 05:27:14 SkyScan query 05:27:15 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 05:27:15 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 05:27:15 Check angles 05:27:15 SkyScan query 05:27:16 SkyScan query done: ret=0 az=171.075<-11405 ze=-6.495<-12433 Statuses=0009 0008 05:27:16 Msec=1500 True Az=171.075 Ze=-6.495 Az status=0009 Ze status=0008 05:27:16 Check angles 05:27:16 SkyScan query 05:27:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:27:16 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:27:16 Message to Master queued w/err=0: serial=40880 error=0 05:27:21 Received message from Master: op=Filter serial=40881 05:27:21 Color wheel filter change from 0 to 0 05:27:21 FLIGetFilterPos err=0 currentPosition=0 05:27:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:21 Filter is already there-color wheel unchanged 05:27:22 Received message from Master: op=Shutter serial=40882 05:27:22 Shutter LASER close 05:27:22 Received message from Camera: op=State serial=40884 05:27:22 GetSingleValue result=40 Value=cccccccc 05:27:22 SkyScan query 05:27:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:27:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:22 Parameters OK 05:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:22 Set A/D data flow result=40 05:27:22 Set A/D channel type result=40 05:27:22 Set A/D encoding result=40 05:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:22 Set channel filter=0.000000e+000 result=40 05:27:22 Config A/D Result=40 05:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:22 Get A/D filter: -9.255963e+061 result=40 05:27:22 Get A/D value=-858993460 result=40 05:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:22 Parameters OK 05:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:22 Set A/D data flow result=40 05:27:22 Set A/D channel type result=40 05:27:22 Set A/D encoding result=40 05:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:22 Set channel filter=0.000000e+000 result=40 05:27:22 Config A/D Result=40 05:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:22 Get A/D filter: -9.255963e+061 result=40 05:27:22 Get A/D value=-858993460 result=40 05:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:22 Aux= 05:27:22 Message to Camera, serial 40884 queued 05:27:59 Received message from Master: op=PointingHead serial=40897 05:27:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:27:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:27:59 Point started: ret=0 05:27:59 point_skyscan result=0 05:28:00 Check angles 05:28:00 SkyScan query 05:28:01 SkyScan query done: ret=0 az=153.225<-10215 ze=6.51<-11566 Statuses=0009 0008 05:28:01 Msec=0 True Az=153.225 Ze=6.51 Az status=0009 Ze status=0008 05:28:01 Check angles 05:28:01 SkyScan query 05:28:01 SkyScan query done: ret=0 az=135.405<-9027 ze=6.495<-11567 Statuses=0009 0008 05:28:01 Msec=750 True Az=135.405 Ze=6.495 Az status=0009 Ze status=0008 05:28:02 Check angles 05:28:02 SkyScan query 05:28:02 SkyScan query done: ret=0 az=117.945<-7863 ze=6.495<-11567 Statuses=0009 0008 05:28:02 Msec=1500 True Az=117.945 Ze=6.495 Az status=0009 Ze status=0008 05:28:02 Check angles 05:28:02 SkyScan query 05:28:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:28:03 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:28:03 Message to Master queued w/err=0: serial=40897 error=0 05:28:08 Received message from Master: op=Filter serial=40898 05:28:08 Color wheel filter change from 0 to 0 05:28:08 FLIGetFilterPos err=0 currentPosition=0 05:28:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:08 Filter is already there-color wheel unchanged 05:28:08 Received message from Master: op=Shutter serial=40899 05:28:08 Shutter LASER close 05:28:08 Received message from Camera: op=State serial=40901 05:28:08 GetSingleValue result=40 Value=cccccccc 05:28:08 SkyScan query 05:28:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:28:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:09 Parameters OK 05:28:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:09 Set A/D data flow result=40 05:28:09 Set A/D channel type result=40 05:28:09 Set A/D encoding result=40 05:28:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:09 Set channel filter=0.000000e+000 result=40 05:28:09 Config A/D Result=40 05:28:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:09 Get A/D filter: -9.255963e+061 result=40 05:28:09 Get A/D value=-858993460 result=40 05:28:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:09 Parameters OK 05:28:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:09 Set A/D data flow result=40 05:28:09 Set A/D channel type result=40 05:28:09 Set A/D encoding result=40 05:28:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:09 Set channel filter=0.000000e+000 result=40 05:28:09 Config A/D Result=40 05:28:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:09 Get A/D filter: -9.255963e+061 result=40 05:28:09 Get A/D value=-858993460 result=40 05:28:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:09 Aux= 05:28:09 Message to Camera, serial 40901 queued 05:28:45 Received message from Master: op=PointingHead serial=40913 05:28:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:28:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:28:45 Point started: ret=0 05:28:45 point_skyscan result=0 05:28:46 Check angles 05:28:46 SkyScan query 05:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 05:28:46 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 05:28:46 Check angles 05:28:46 SkyScan query 05:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 05:28:47 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 05:28:47 Check angles 05:28:47 SkyScan query 05:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 05:28:48 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 05:28:48 Check angles 05:28:48 SkyScan query 05:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 05:28:49 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 05:28:49 Check angles 05:28:49 SkyScan query 05:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.445<-19163 Statuses=0008 0009 05:28:49 Msec=3000 True Az=112.995 Ze=-107.445 Az status=0008 Ze status=0009 05:28:49 Check angles 05:28:49 SkyScan query 05:28:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.385<-20559 Statuses=0008 0009 05:28:50 Msec=3750 True Az=112.995 Ze=-128.385 Az status=0008 Ze status=0009 05:28:50 Check angles 05:28:50 SkyScan query 05:28:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.37<-21958 Statuses=0008 0009 05:28:51 Msec=4500 True Az=112.995 Ze=-149.37 Az status=0008 Ze status=0009 05:28:51 Check angles 05:28:51 SkyScan query 05:28:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.31<-23354 Statuses=0008 0009 05:28:52 Msec=5250 True Az=112.995 Ze=-170.31 Az status=0008 Ze status=0009 05:28:52 Check angles 05:28:52 SkyScan query 05:28:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:28:52 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:28:52 Message to Master queued w/err=0: serial=40913 error=0 05:28:57 Received message from Master: op=Filter serial=40914 05:28:57 Color wheel filter change from 0 to 0 05:28:57 FLIGetFilterPos err=0 currentPosition=0 05:28:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:57 Filter is already there-color wheel unchanged 05:28:57 Received message from Master: op=Shutter serial=40915 05:28:57 Shutter LASER open 05:28:58 Received message from Camera: op=State serial=40917 05:28:58 GetSingleValue result=40 Value=cccccccc 05:28:58 SkyScan query 05:28:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:28:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:58 Parameters OK 05:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:58 Set A/D data flow result=40 05:28:58 Set A/D channel type result=40 05:28:58 Set A/D encoding result=40 05:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:58 Set channel filter=0.000000e+000 result=40 05:28:58 Config A/D Result=40 05:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:58 Get A/D filter: -9.255963e+061 result=40 05:28:58 Get A/D value=-858993460 result=40 05:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:58 Parameters OK 05:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:58 Set A/D data flow result=40 05:28:58 Set A/D channel type result=40 05:28:58 Set A/D encoding result=40 05:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:58 Set channel filter=0.000000e+000 result=40 05:28:58 Config A/D Result=40 05:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:58 Get A/D filter: -9.255963e+061 result=40 05:28:58 Get A/D value=-858993460 result=40 05:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:58 Aux= 05:28:58 Message to Camera, serial 40917 queued 05:29:07 Received message from Master: op=Shutter serial=40927 05:29:07 Shutter LASER close 05:29:07 Received message from Master: op=PointingHead serial=40931 05:29:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:29:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:29:07 Point started: ret=0 05:29:07 point_skyscan result=0 05:29:08 Check angles 05:29:08 SkyScan query 05:29:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 05:29:09 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 05:29:09 Check angles 05:29:09 SkyScan query 05:29:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 05:29:10 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 05:29:10 Check angles 05:29:10 SkyScan query 05:29:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 05:29:10 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 05:29:10 Check angles 05:29:10 SkyScan query 05:29:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.95<-17330 Statuses=0008 0009 05:29:11 Msec=2250 True Az=112.995 Ze=-79.95 Az status=0008 Ze status=0009 05:29:11 Check angles 05:29:11 SkyScan query 05:29:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 05:29:12 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 05:29:12 Check angles 05:29:12 SkyScan query 05:29:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 05:29:13 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 05:29:13 Check angles 05:29:13 SkyScan query 05:29:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.07<-13138 Statuses=0008 0009 05:29:13 Msec=4500 True Az=112.995 Ze=-17.07 Az status=0008 Ze status=0009 05:29:13 Check angles 05:29:13 SkyScan query 05:29:14 SkyScan query done: ret=0 az=112.995<-7533 ze=3.9<-11740 Statuses=0008 0009 05:29:14 Msec=5250 True Az=112.995 Ze=3.9 Az status=0008 Ze status=0009 05:29:14 Check angles 05:29:14 SkyScan query 05:29:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:29:15 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:29:15 Message to Master queued w/err=0: serial=40931 error=0 05:29:20 Received message from Master: op=Filter serial=40932 05:29:20 Color wheel filter change from 0 to 0 05:29:20 FLIGetFilterPos err=0 currentPosition=0 05:29:20 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:20 Filter is already there-color wheel unchanged 05:29:20 Received message from Master: op=Shutter serial=40933 05:29:20 Shutter LASER close 05:29:20 Received message from Camera: op=State serial=40935 05:29:20 GetSingleValue result=40 Value=cccccccc 05:29:20 SkyScan query 05:29:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:21 Parameters OK 05:29:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:21 Set A/D data flow result=40 05:29:21 Set A/D channel type result=40 05:29:21 Set A/D encoding result=40 05:29:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:21 Set channel filter=0.000000e+000 result=40 05:29:21 Config A/D Result=40 05:29:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:21 Get A/D filter: -9.255963e+061 result=40 05:29:21 Get A/D value=-858993460 result=40 05:29:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:21 Parameters OK 05:29:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:21 Set A/D data flow result=40 05:29:21 Set A/D channel type result=40 05:29:21 Set A/D encoding result=40 05:29:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:21 Set channel filter=0.000000e+000 result=40 05:29:21 Config A/D Result=40 05:29:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:21 Get A/D filter: -9.255963e+061 result=40 05:29:21 Get A/D value=-858993460 result=40 05:29:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:21 Aux= 05:29:21 Message to Camera, serial 40935 queued 05:29:58 Received message from Master: op=PointingHead serial=40948 05:29:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:29:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:29:58 Point started: ret=0 05:29:58 point_skyscan result=0 05:29:59 Check angles 05:29:59 SkyScan query 05:29:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:29:59 Message to Master queued w/err=0: serial=40948 error=0 05:30:04 Received message from Master: op=Filter serial=40949 05:30:04 Color wheel filter change from 0 to 0 05:30:04 FLIGetFilterPos err=0 currentPosition=0 05:30:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:04 Filter is already there-color wheel unchanged 05:30:04 Received message from Master: op=Shutter serial=40950 05:30:04 Shutter LASER close 05:30:04 Received message from Camera: op=State serial=40952 05:30:04 GetSingleValue result=40 Value=cccccccc 05:30:04 SkyScan query 05:30:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:30:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:05 Parameters OK 05:30:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:05 Set A/D data flow result=40 05:30:05 Set A/D channel type result=40 05:30:05 Set A/D encoding result=40 05:30:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:05 Set channel filter=0.000000e+000 result=40 05:30:05 Config A/D Result=40 05:30:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:05 Get A/D filter: -9.255963e+061 result=40 05:30:05 Get A/D value=-858993460 result=40 05:30:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:05 Parameters OK 05:30:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:05 Set A/D data flow result=40 05:30:05 Set A/D channel type result=40 05:30:05 Set A/D encoding result=40 05:30:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:05 Set channel filter=0.000000e+000 result=40 05:30:05 Config A/D Result=40 05:30:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:05 Get A/D filter: -9.255963e+061 result=40 05:30:05 Get A/D value=-858993460 result=40 05:30:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:05 Aux= 05:30:05 Message to Camera, serial 40952 queued 05:30:42 Received message from Master: op=PointingHead serial=40965 05:30:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:30:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:30:42 Point started: ret=0 05:30:42 point_skyscan result=0 05:30:43 Check angles 05:30:43 SkyScan query 05:30:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:30:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:30:44 Message to Master queued w/err=0: serial=40965 error=0 05:30:49 Received message from Master: op=Filter serial=40966 05:30:49 Color wheel filter change from 0 to 0 05:30:49 FLIGetFilterPos err=0 currentPosition=0 05:30:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:49 Filter is already there-color wheel unchanged 05:30:49 Received message from Master: op=Shutter serial=40967 05:30:49 Shutter LASER close 05:30:49 Received message from Camera: op=State serial=40969 05:30:49 GetSingleValue result=40 Value=cccccccc 05:30:49 SkyScan query 05:30:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:30:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:49 Parameters OK 05:30:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:49 Set A/D data flow result=40 05:30:49 Set A/D channel type result=40 05:30:49 Set A/D encoding result=40 05:30:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:49 Set channel filter=0.000000e+000 result=40 05:30:49 Config A/D Result=40 05:30:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:49 Get A/D filter: -9.255963e+061 result=40 05:30:49 Get A/D value=-858993460 result=40 05:30:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:49 Parameters OK 05:30:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:49 Set A/D data flow result=40 05:30:49 Set A/D channel type result=40 05:30:49 Set A/D encoding result=40 05:30:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:49 Set channel filter=0.000000e+000 result=40 05:30:49 Config A/D Result=40 05:30:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:49 Get A/D filter: -9.255963e+061 result=40 05:30:49 Get A/D value=-858993460 result=40 05:30:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:49 Aux= 05:30:49 Message to Camera, serial 40969 queued 05:31:26 Received message from Master: op=PointingHead serial=40982 05:31:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:31:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:31:26 Point started: ret=0 05:31:26 point_skyscan result=0 05:31:27 Check angles 05:31:27 SkyScan query 05:31:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:31:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:31:28 Message to Master queued w/err=0: serial=40982 error=0 05:31:33 Received message from Master: op=Filter serial=40983 05:31:33 Color wheel filter change from 0 to 0 05:31:33 FLIGetFilterPos err=0 currentPosition=0 05:31:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:33 Filter is already there-color wheel unchanged 05:31:33 Received message from Master: op=Shutter serial=40984 05:31:33 Shutter LASER close 05:31:33 Received message from Camera: op=State serial=40986 05:31:33 GetSingleValue result=40 Value=cccccccc 05:31:33 SkyScan query 05:31:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:31:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:34 Parameters OK 05:31:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:34 Set A/D data flow result=40 05:31:34 Set A/D channel type result=40 05:31:34 Set A/D encoding result=40 05:31:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:34 Set channel filter=0.000000e+000 result=40 05:31:34 Config A/D Result=40 05:31:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:34 Get A/D filter: -9.255963e+061 result=40 05:31:34 Get A/D value=-858993460 result=40 05:31:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:34 Parameters OK 05:31:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:34 Set A/D data flow result=40 05:31:34 Set A/D channel type result=40 05:31:34 Set A/D encoding result=40 05:31:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:34 Set channel filter=0.000000e+000 result=40 05:31:34 Config A/D Result=40 05:31:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:34 Get A/D filter: -9.255963e+061 result=40 05:31:34 Get A/D value=-858993460 result=40 05:31:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:34 Aux= 05:31:34 Message to Camera, serial 40986 queued 05:32:10 Received message from Master: op=PointingHead serial=40999 05:32:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:32:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:32:11 Point started: ret=0 05:32:11 point_skyscan result=0 05:32:12 Check angles 05:32:12 SkyScan query 05:32:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 05:32:12 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 05:32:12 Check angles 05:32:12 SkyScan query 05:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 05:32:13 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 05:32:13 Check angles 05:32:13 SkyScan query 05:32:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 05:32:14 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 05:32:14 Check angles 05:32:14 SkyScan query 05:32:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 05:32:14 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 05:32:15 Check angles 05:32:15 SkyScan query 05:32:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.31<-19154 Statuses=0008 0009 05:32:15 Msec=3000 True Az=112.995 Ze=-107.31 Az status=0008 Ze status=0009 05:32:15 Check angles 05:32:15 SkyScan query 05:32:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.28<-20552 Statuses=0008 0009 05:32:16 Msec=3750 True Az=112.995 Ze=-128.28 Az status=0008 Ze status=0009 05:32:16 Check angles 05:32:16 SkyScan query 05:32:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.25<-21950 Statuses=0008 0009 05:32:17 Msec=4500 True Az=112.995 Ze=-149.25 Az status=0008 Ze status=0009 05:32:17 Check angles 05:32:17 SkyScan query 05:32:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.58<-23372 Statuses=0008 0009 05:32:17 Msec=5250 True Az=112.995 Ze=-170.58 Az status=0008 Ze status=0009 05:32:18 Check angles 05:32:18 SkyScan query 05:32:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:32:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:32:18 Message to Master queued w/err=0: serial=40999 error=0 05:32:23 Received message from Master: op=Filter serial=41000 05:32:23 Color wheel filter change from 0 to 0 05:32:23 FLIGetFilterPos err=0 currentPosition=0 05:32:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:23 Filter is already there-color wheel unchanged 05:32:23 Received message from Master: op=Shutter serial=41001 05:32:23 Shutter LASER open 05:32:23 Received message from Camera: op=State serial=41003 05:32:23 GetSingleValue result=40 Value=cccccccc 05:32:23 SkyScan query 05:32:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:32:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:24 Parameters OK 05:32:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:24 Set A/D data flow result=40 05:32:24 Set A/D channel type result=40 05:32:24 Set A/D encoding result=40 05:32:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:24 Set channel filter=0.000000e+000 result=40 05:32:24 Config A/D Result=40 05:32:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:24 Get A/D filter: -9.255963e+061 result=40 05:32:24 Get A/D value=-858993460 result=40 05:32:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:24 Parameters OK 05:32:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:24 Set A/D data flow result=40 05:32:24 Set A/D channel type result=40 05:32:24 Set A/D encoding result=40 05:32:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:24 Set channel filter=0.000000e+000 result=40 05:32:24 Config A/D Result=40 05:32:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:24 Get A/D filter: -9.255963e+061 result=40 05:32:24 Get A/D value=-858993460 result=40 05:32:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:24 Aux= 05:32:24 Message to Camera, serial 41003 queued 05:32:32 Received message from Master: op=Shutter serial=41012 05:32:32 Shutter LASER close 05:32:32 Received message from Master: op=PointingHead serial=41016 05:32:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:32:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:32:32 Point started: ret=0 05:32:32 point_skyscan result=0 05:32:33 Check angles 05:32:33 SkyScan query 05:32:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 05:32:34 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 05:32:34 Check angles 05:32:34 SkyScan query 05:32:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 05:32:35 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 05:32:35 Check angles 05:32:35 SkyScan query 05:32:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 05:32:35 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 05:32:35 Check angles 05:32:35 SkyScan query 05:32:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 05:32:36 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 05:32:36 Check angles 05:32:36 SkyScan query 05:32:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 05:32:37 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 05:32:37 Check angles 05:32:37 SkyScan query 05:32:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 05:32:38 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 05:32:38 Check angles 05:32:38 SkyScan query 05:32:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 05:32:38 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 05:32:38 Check angles 05:32:38 SkyScan query 05:32:39 SkyScan query done: ret=0 az=112.995<-7533 ze=3.87<-11742 Statuses=0008 0009 05:32:39 Msec=5250 True Az=112.995 Ze=3.87 Az status=0008 Ze status=0009 05:32:39 Check angles 05:32:39 SkyScan query 05:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:32:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:32:40 Message to Master queued w/err=0: serial=41016 error=0 05:32:45 Received message from Master: op=Filter serial=41017 05:32:45 Color wheel filter change from 0 to 0 05:32:45 FLIGetFilterPos err=0 currentPosition=0 05:32:45 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:45 Filter is already there-color wheel unchanged 05:32:45 Received message from Master: op=Shutter serial=41018 05:32:45 Shutter LASER close 05:32:45 Received message from Camera: op=State serial=41020 05:32:45 GetSingleValue result=40 Value=cccccccc 05:32:45 SkyScan query 05:32:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:32:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:46 Parameters OK 05:32:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:46 Set A/D data flow result=40 05:32:46 Set A/D channel type result=40 05:32:46 Set A/D encoding result=40 05:32:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:46 Set channel filter=0.000000e+000 result=40 05:32:46 Config A/D Result=40 05:32:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:46 Get A/D filter: -9.255963e+061 result=40 05:32:46 Get A/D value=-858993460 result=40 05:32:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:46 Parameters OK 05:32:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:46 Set A/D data flow result=40 05:32:46 Set A/D channel type result=40 05:32:46 Set A/D encoding result=40 05:32:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:46 Set channel filter=0.000000e+000 result=40 05:32:46 Config A/D Result=40 05:32:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:46 Get A/D filter: -9.255963e+061 result=40 05:32:46 Get A/D value=-858993460 result=40 05:32:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:46 Aux= 05:32:46 Message to Camera, serial 41020 queued 05:33:23 Received message from Master: op=PointingHead serial=41033 05:33:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:33:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:33:23 Point started: ret=0 05:33:23 point_skyscan result=0 05:33:24 Check angles 05:33:24 SkyScan query 05:33:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:33:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:33:24 Message to Master queued w/err=0: serial=41033 error=0 05:33:29 Received message from Master: op=Filter serial=41034 05:33:29 Color wheel filter change from 0 to 0 05:33:29 FLIGetFilterPos err=0 currentPosition=0 05:33:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:29 Filter is already there-color wheel unchanged 05:33:29 Received message from Master: op=Shutter serial=41035 05:33:29 Shutter LASER close 05:33:30 Received message from Camera: op=State serial=41037 05:33:30 GetSingleValue result=40 Value=cccccccc 05:33:30 SkyScan query 05:33:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:33:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:30 Parameters OK 05:33:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:30 Set A/D data flow result=40 05:33:30 Set A/D channel type result=40 05:33:30 Set A/D encoding result=40 05:33:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:30 Set channel filter=0.000000e+000 result=40 05:33:30 Config A/D Result=40 05:33:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:30 Get A/D filter: -9.255963e+061 result=40 05:33:30 Get A/D value=-858993460 result=40 05:33:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:30 Parameters OK 05:33:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:30 Set A/D data flow result=40 05:33:30 Set A/D channel type result=40 05:33:30 Set A/D encoding result=40 05:33:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:30 Set channel filter=0.000000e+000 result=40 05:33:30 Config A/D Result=40 05:33:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:30 Get A/D filter: -9.255963e+061 result=40 05:33:30 Get A/D value=-858993460 result=40 05:33:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:30 Aux= 05:33:30 Message to Camera, serial 41037 queued 05:33:38 Received message from Master: op=Identify serial=41038 05:34:07 Received message from Master: op=PointingHead serial=41053 05:34:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:34:07 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:34:07 Point started: ret=0 05:34:07 point_skyscan result=0 05:34:08 Check angles 05:34:08 SkyScan query 05:34:09 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 05:34:09 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 05:34:09 Check angles 05:34:09 SkyScan query 05:34:09 SkyScan query done: ret=0 az=153.585<-10239 ze=-6.495<-12433 Statuses=0009 0008 05:34:09 Msec=750 True Az=153.585 Ze=-6.495 Az status=0009 Ze status=0008 05:34:10 Check angles 05:34:10 SkyScan query 05:34:10 SkyScan query done: ret=0 az=171.42<-11428 ze=-6.495<-12433 Statuses=0009 0008 05:34:10 Msec=1500 True Az=171.42 Ze=-6.495 Az status=0009 Ze status=0008 05:34:10 Check angles 05:34:10 SkyScan query 05:34:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:34:11 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 [UTC 2019-3-1 05:34:11] 05:34:11 Message to Master queued w/err=0: serial=41053 error=0 05:34:16 Received message from Master: op=Filter serial=41054 05:34:16 Color wheel filter change from 0 to 0 05:34:16 FLIGetFilterPos err=0 currentPosition=0 05:34:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:16 Filter is already there-color wheel unchanged 05:34:16 Received message from Master: op=Shutter serial=41055 05:34:16 Shutter LASER close 05:34:16 Received message from Camera: op=State serial=41057 05:34:16 GetSingleValue result=40 Value=cccccccc 05:34:16 SkyScan query 05:34:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:34:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:17 Parameters OK 05:34:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:17 Set A/D data flow result=40 05:34:17 Set A/D channel type result=40 05:34:17 Set A/D encoding result=40 05:34:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:17 Set channel filter=0.000000e+000 result=40 05:34:17 Config A/D Result=40 05:34:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:17 Get A/D filter: -9.255963e+061 result=40 05:34:17 Get A/D value=-858993460 result=40 05:34:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:17 Parameters OK 05:34:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:17 Set A/D data flow result=40 05:34:17 Set A/D channel type result=40 05:34:17 Set A/D encoding result=40 05:34:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:17 Set channel filter=0.000000e+000 result=40 05:34:17 Config A/D Result=40 05:34:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:17 Get A/D filter: -9.255963e+061 result=40 05:34:17 Get A/D value=-858993460 result=40 05:34:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:17 Aux= 05:34:17 Message to Camera, serial 41057 queued 05:34:53 Received message from Master: op=PointingHead serial=41070 05:34:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:34:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:34:54 Point started: ret=0 05:34:54 point_skyscan result=0 05:34:55 Check angles 05:34:55 SkyScan query 05:34:55 SkyScan query done: ret=0 az=153.24<-10216 ze=6.51<-11566 Statuses=0009 0008 05:34:55 Msec=0 True Az=153.24 Ze=6.51 Az status=0009 Ze status=0008 05:34:55 Check angles 05:34:55 SkyScan query 05:34:56 SkyScan query done: ret=0 az=135.405<-9027 ze=6.495<-11567 Statuses=0009 0008 05:34:56 Msec=750 True Az=135.405 Ze=6.495 Az status=0009 Ze status=0008 05:34:56 Check angles 05:34:56 SkyScan query 05:34:57 SkyScan query done: ret=0 az=117.555<-7837 ze=6.495<-11567 Statuses=0009 0008 05:34:57 Msec=1500 True Az=117.555 Ze=6.495 Az status=0009 Ze status=0008 05:34:57 Check angles 05:34:57 SkyScan query 05:34:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:34:57 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:34:57 Message to Master queued w/err=0: serial=41070 error=0 05:35:02 Received message from Master: op=Filter serial=41071 05:35:02 Color wheel filter change from 0 to 0 05:35:02 FLIGetFilterPos err=0 currentPosition=0 05:35:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:02 Filter is already there-color wheel unchanged 05:35:03 Received message from Master: op=Shutter serial=41072 05:35:03 Shutter LASER close 05:35:03 Received message from Camera: op=State serial=41074 05:35:03 GetSingleValue result=40 Value=cccccccc 05:35:03 SkyScan query 05:35:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:35:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:03 Parameters OK 05:35:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:03 Set A/D data flow result=40 05:35:03 Set A/D channel type result=40 05:35:03 Set A/D encoding result=40 05:35:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:03 Set channel filter=0.000000e+000 result=40 05:35:03 Config A/D Result=40 05:35:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:03 Get A/D filter: -9.255963e+061 result=40 05:35:03 Get A/D value=-858993460 result=40 05:35:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:03 Parameters OK 05:35:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:03 Set A/D data flow result=40 05:35:03 Set A/D channel type result=40 05:35:03 Set A/D encoding result=40 05:35:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:03 Set channel filter=0.000000e+000 result=40 05:35:03 Config A/D Result=40 05:35:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:03 Get A/D filter: -9.255963e+061 result=40 05:35:03 Get A/D value=-858993460 result=40 05:35:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:03 Aux= 05:35:03 Message to Camera, serial 41074 queued 05:35:40 Received message from Master: op=PointingHead serial=41087 05:35:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:35:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:35:40 Point started: ret=0 05:35:40 point_skyscan result=0 05:35:41 Check angles 05:35:41 SkyScan query 05:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.745<-13583 Statuses=0008 0009 05:35:42 Msec=0 True Az=112.995 Ze=-23.745 Az status=0008 Ze status=0009 05:35:42 Check angles 05:35:42 SkyScan query 05:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 05:35:42 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 05:35:43 Check angles 05:35:43 SkyScan query 05:35:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.09<-16406 Statuses=0008 0009 05:35:43 Msec=1500 True Az=112.995 Ze=-66.09 Az status=0008 Ze status=0009 05:35:43 Check angles 05:35:43 SkyScan query 05:35:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.48<-17832 Statuses=0008 0009 05:35:44 Msec=2250 True Az=112.995 Ze=-87.48 Az status=0008 Ze status=0009 05:35:44 Check angles 05:35:44 SkyScan query 05:35:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.855<-19257 Statuses=0008 0009 05:35:45 Msec=3000 True Az=112.995 Ze=-108.855 Az status=0008 Ze status=0009 05:35:45 Check angles 05:35:45 SkyScan query 05:35:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.825<-20655 Statuses=0008 0009 05:35:46 Msec=3750 True Az=112.995 Ze=-129.825 Az status=0008 Ze status=0009 05:35:46 Check angles 05:35:46 SkyScan query 05:35:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.765<-22051 Statuses=0008 0009 05:35:46 Msec=4500 True Az=112.995 Ze=-150.765 Az status=0008 Ze status=0009 05:35:46 Check angles 05:35:46 SkyScan query 05:35:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0008 0009 05:35:47 Msec=5250 True Az=112.995 Ze=-171.45 Az status=0008 Ze status=0009 05:35:47 Check angles 05:35:47 SkyScan query 05:35:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:35:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:35:48 Message to Master queued w/err=0: serial=41087 error=0 05:35:53 Received message from Master: op=Filter serial=41088 05:35:53 Color wheel filter change from 0 to 0 05:35:53 FLIGetFilterPos err=0 currentPosition=0 05:35:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:53 Filter is already there-color wheel unchanged 05:35:53 Received message from Master: op=Shutter serial=41089 05:35:53 Shutter LASER open 05:35:53 Received message from Camera: op=State serial=41091 05:35:53 GetSingleValue result=40 Value=cccccccc 05:35:53 SkyScan query 05:35:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:35:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:54 Parameters OK 05:35:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:54 Set A/D data flow result=40 05:35:54 Set A/D channel type result=40 05:35:54 Set A/D encoding result=40 05:35:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:54 Set channel filter=0.000000e+000 result=40 05:35:54 Config A/D Result=40 05:35:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:54 Get A/D filter: -9.255963e+061 result=40 05:35:54 Get A/D value=-858993460 result=40 05:35:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:54 Parameters OK 05:35:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:54 Set A/D data flow result=40 05:35:54 Set A/D channel type result=40 05:35:54 Set A/D encoding result=40 05:35:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:54 Set channel filter=0.000000e+000 result=40 05:35:54 Config A/D Result=40 05:35:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:54 Get A/D filter: -9.255963e+061 result=40 05:35:54 Get A/D value=-858993460 result=40 05:35:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:54 Aux= 05:35:54 Message to Camera, serial 41091 queued 05:36:02 Received message from Master: op=Shutter serial=41101 05:36:02 Shutter LASER close 05:36:03 Received message from Master: op=PointingHead serial=41105 05:36:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:36:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:36:03 Point started: ret=0 05:36:03 point_skyscan result=0 05:36:04 Check angles 05:36:04 SkyScan query 05:36:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 05:36:04 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 05:36:04 Check angles 05:36:04 SkyScan query 05:36:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 05:36:05 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 05:36:05 Check angles 05:36:05 SkyScan query 05:36:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 05:36:06 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 05:36:06 Check angles 05:36:06 SkyScan query 05:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 05:36:07 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 05:36:07 Check angles 05:36:07 SkyScan query 05:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.68<-15912 Statuses=0008 0009 05:36:07 Msec=3000 True Az=112.995 Ze=-58.68 Az status=0008 Ze status=0009 05:36:07 Check angles 05:36:07 SkyScan query 05:36:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 05:36:08 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 05:36:08 Check angles 05:36:08 SkyScan query 05:36:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.755<-13117 Statuses=0008 0009 05:36:09 Msec=4500 True Az=112.995 Ze=-16.755 Az status=0008 Ze status=0009 05:36:09 Check angles 05:36:09 SkyScan query 05:36:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.17<-11722 Statuses=0008 0009 05:36:10 Msec=5250 True Az=112.995 Ze=4.17 Az status=0008 Ze status=0009 05:36:10 Check angles 05:36:10 SkyScan query 05:36:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:36:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:36:10 Message to Master queued w/err=0: serial=41105 error=0 05:36:15 Received message from Master: op=Filter serial=41106 05:36:15 Color wheel filter change from 0 to 0 05:36:15 FLIGetFilterPos err=0 currentPosition=0 05:36:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:15 Filter is already there-color wheel unchanged 05:36:15 Received message from Master: op=Shutter serial=41107 05:36:15 Shutter LASER close 05:36:16 Received message from Camera: op=State serial=41109 05:36:16 GetSingleValue result=40 Value=cccccccc 05:36:16 SkyScan query 05:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:16 Parameters OK 05:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:16 Set A/D data flow result=40 05:36:16 Set A/D channel type result=40 05:36:16 Set A/D encoding result=40 05:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:16 Set channel filter=0.000000e+000 result=40 05:36:16 Config A/D Result=40 05:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:16 Get A/D filter: -9.255963e+061 result=40 05:36:16 Get A/D value=-858993460 result=40 05:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:16 Parameters OK 05:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:16 Set A/D data flow result=40 05:36:16 Set A/D channel type result=40 05:36:16 Set A/D encoding result=40 05:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:16 Set channel filter=0.000000e+000 result=40 05:36:16 Config A/D Result=40 05:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:16 Get A/D filter: -9.255963e+061 result=40 05:36:16 Get A/D value=-858993460 result=40 05:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:16 Aux= 05:36:16 Message to Camera, serial 41109 queued 05:36:53 Received message from Master: op=PointingHead serial=41122 05:36:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:36:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:36:53 Point started: ret=0 05:36:53 point_skyscan result=0 05:36:54 Check angles 05:36:54 SkyScan query 05:36:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:36:55 Message to Master queued w/err=0: serial=41122 error=0 05:37:00 Received message from Master: op=Filter serial=41123 05:37:00 Color wheel filter change from 0 to 0 05:37:00 FLIGetFilterPos err=0 currentPosition=0 05:37:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:00 Filter is already there-color wheel unchanged 05:37:00 Received message from Master: op=Shutter serial=41124 05:37:00 Shutter LASER close 05:37:00 Received message from Camera: op=State serial=41126 05:37:00 GetSingleValue result=40 Value=cccccccc 05:37:00 SkyScan query 05:37:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:37:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:01 Parameters OK 05:37:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:01 Set A/D data flow result=40 05:37:01 Set A/D channel type result=40 05:37:01 Set A/D encoding result=40 05:37:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:01 Set channel filter=0.000000e+000 result=40 05:37:01 Config A/D Result=40 05:37:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:01 Get A/D filter: -9.255963e+061 result=40 05:37:01 Get A/D value=-858993460 result=40 05:37:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:01 Parameters OK 05:37:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:01 Set A/D data flow result=40 05:37:01 Set A/D channel type result=40 05:37:01 Set A/D encoding result=40 05:37:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:01 Set channel filter=0.000000e+000 result=40 05:37:01 Config A/D Result=40 05:37:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:01 Get A/D filter: -9.255963e+061 result=40 05:37:01 Get A/D value=-858993460 result=40 05:37:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:01 Aux= 05:37:01 Message to Camera, serial 41126 queued 05:37:37 Received message from Master: op=PointingHead serial=41139 05:37:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:37:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:37:38 Point started: ret=0 05:37:38 point_skyscan result=0 05:37:39 Check angles 05:37:39 SkyScan query 05:37:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:37:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:37:39 Message to Master queued w/err=0: serial=41139 error=0 05:37:44 Received message from Master: op=Filter serial=41140 05:37:44 Color wheel filter change from 0 to 0 05:37:44 FLIGetFilterPos err=0 currentPosition=0 05:37:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:44 Filter is already there-color wheel unchanged 05:37:44 Received message from Master: op=Shutter serial=41141 05:37:44 Shutter LASER close 05:37:44 Received message from Camera: op=State serial=41143 05:37:44 GetSingleValue result=40 Value=cccccccc 05:37:44 SkyScan query 05:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:37:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:45 Parameters OK 05:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:45 Set A/D data flow result=40 05:37:45 Set A/D channel type result=40 05:37:45 Set A/D encoding result=40 05:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:45 Set channel filter=0.000000e+000 result=40 05:37:45 Config A/D Result=40 05:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:45 Get A/D filter: -9.255963e+061 result=40 05:37:45 Get A/D value=-858993460 result=40 05:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:45 Parameters OK 05:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:45 Set A/D data flow result=40 05:37:45 Set A/D channel type result=40 05:37:45 Set A/D encoding result=40 05:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:45 Set channel filter=0.000000e+000 result=40 05:37:45 Config A/D Result=40 05:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:45 Get A/D filter: -9.255963e+061 result=40 05:37:45 Get A/D value=-858993460 result=40 05:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:45 Aux= 05:37:45 Message to Camera, serial 41143 queued 05:38:22 Received message from Master: op=PointingHead serial=41156 05:38:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:38:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:38:22 Point started: ret=0 05:38:22 point_skyscan result=0 05:38:23 Check angles 05:38:23 SkyScan query 05:38:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:38:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:38:23 Message to Master queued w/err=0: serial=41156 error=0 05:38:28 Received message from Master: op=Filter serial=41157 05:38:28 Color wheel filter change from 0 to 0 05:38:28 FLIGetFilterPos err=0 currentPosition=0 05:38:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:28 Filter is already there-color wheel unchanged 05:38:29 Received message from Master: op=Shutter serial=41158 05:38:29 Shutter LASER close 05:38:29 Received message from Camera: op=State serial=41160 05:38:29 GetSingleValue result=40 Value=cccccccc 05:38:29 SkyScan query 05:38:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:38:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:29 Parameters OK 05:38:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:29 Set A/D data flow result=40 05:38:29 Set A/D channel type result=40 05:38:29 Set A/D encoding result=40 05:38:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:29 Set channel filter=0.000000e+000 result=40 05:38:29 Config A/D Result=40 05:38:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:29 Get A/D filter: -9.255963e+061 result=40 05:38:29 Get A/D value=-858993460 result=40 05:38:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:29 Parameters OK 05:38:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:29 Set A/D data flow result=40 05:38:29 Set A/D channel type result=40 05:38:29 Set A/D encoding result=40 05:38:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:29 Set channel filter=0.000000e+000 result=40 05:38:29 Config A/D Result=40 05:38:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:29 Get A/D filter: -9.255963e+061 result=40 05:38:29 Get A/D value=-858993460 result=40 05:38:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:29 Aux= 05:38:29 Message to Camera, serial 41160 queued 05:39:06 Received message from Master: op=PointingHead serial=41173 05:39:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:39:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:39:06 Point started: ret=0 05:39:06 point_skyscan result=0 05:39:07 Check angles 05:39:07 SkyScan query 05:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 05:39:08 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 05:39:08 Check angles 05:39:08 SkyScan query 05:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.1<-14940 Statuses=0008 0009 05:39:08 Msec=750 True Az=112.995 Ze=-44.1 Az status=0008 Ze status=0009 05:39:09 Check angles 05:39:09 SkyScan query 05:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.07<-16338 Statuses=0008 0009 05:39:09 Msec=1500 True Az=112.995 Ze=-65.07 Az status=0008 Ze status=0009 05:39:09 Check angles 05:39:09 SkyScan query 05:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.025<-17735 Statuses=0008 0009 05:39:10 Msec=2250 True Az=112.995 Ze=-86.025 Az status=0008 Ze status=0009 05:39:10 Check angles 05:39:10 SkyScan query 05:39:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 05:39:11 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 05:39:11 Check angles 05:39:11 SkyScan query 05:39:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 05:39:12 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 05:39:12 Check angles 05:39:12 SkyScan query 05:39:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.18<-22012 Statuses=0008 0009 05:39:12 Msec=4500 True Az=112.995 Ze=-150.18 Az status=0008 Ze status=0009 05:39:12 Check angles 05:39:12 SkyScan query 05:39:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-171<-23400 Statuses=0008 0009 05:39:13 Msec=5250 True Az=112.995 Ze=-171 Az status=0008 Ze status=0009 05:39:13 Check angles 05:39:13 SkyScan query 05:39:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:39:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:39:14 Message to Master queued w/err=0: serial=41173 error=0 05:39:19 Received message from Master: op=Filter serial=41174 05:39:19 Color wheel filter change from 0 to 0 05:39:19 FLIGetFilterPos err=0 currentPosition=0 05:39:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:19 Filter is already there-color wheel unchanged 05:39:19 Received message from Master: op=Shutter serial=41175 05:39:19 Shutter LASER open 05:39:19 Received message from Camera: op=State serial=41177 05:39:19 GetSingleValue result=40 Value=cccccccc 05:39:19 SkyScan query 05:39:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:39:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:20 Parameters OK 05:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:20 Set A/D data flow result=40 05:39:20 Set A/D channel type result=40 05:39:20 Set A/D encoding result=40 05:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:20 Set channel filter=0.000000e+000 result=40 05:39:20 Config A/D Result=40 05:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:20 Get A/D filter: -9.255963e+061 result=40 05:39:20 Get A/D value=-858993460 result=40 05:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:20 Parameters OK 05:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:20 Set A/D data flow result=40 05:39:20 Set A/D channel type result=40 05:39:20 Set A/D encoding result=40 05:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:20 Set channel filter=0.000000e+000 result=40 05:39:20 Config A/D Result=40 05:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:20 Get A/D filter: -9.255963e+061 result=40 05:39:20 Get A/D value=-858993460 result=40 05:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:20 Aux= 05:39:20 Message to Camera, serial 41177 queued 05:39:28 Received message from Master: op=Shutter serial=41187 05:39:28 Shutter LASER close 05:39:29 Received message from Master: op=PointingHead serial=41191 05:39:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:39:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:39:29 Point started: ret=0 05:39:29 point_skyscan result=0 05:39:30 Check angles 05:39:30 SkyScan query 05:39:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.905<-21527 Statuses=0008 0009 05:39:30 Msec=0 True Az=112.995 Ze=-142.905 Az status=0008 Ze status=0009 05:39:31 Check angles 05:39:31 SkyScan query 05:39:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 05:39:31 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 05:39:31 Check angles 05:39:31 SkyScan query 05:39:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.575<-18705 Statuses=0008 0009 05:39:32 Msec=1500 True Az=112.995 Ze=-100.575 Az status=0008 Ze status=0009 05:39:32 Check angles 05:39:32 SkyScan query 05:39:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.605<-17307 Statuses=0008 0009 05:39:33 Msec=2250 True Az=112.995 Ze=-79.605 Az status=0008 Ze status=0009 05:39:33 Check angles 05:39:33 SkyScan query 05:39:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.65<-15910 Statuses=0008 0009 05:39:33 Msec=3000 True Az=112.995 Ze=-58.65 Az status=0008 Ze status=0009 05:39:34 Check angles 05:39:34 SkyScan query 05:39:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 05:39:34 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 05:39:34 Check angles 05:39:34 SkyScan query 05:39:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.74<-13116 Statuses=0008 0009 05:39:35 Msec=4500 True Az=112.995 Ze=-16.74 Az status=0008 Ze status=0009 05:39:35 Check angles 05:39:35 SkyScan query 05:39:36 SkyScan query done: ret=0 az=112.995<-7533 ze=4.185<-11721 Statuses=0008 0009 05:39:36 Msec=5250 True Az=112.995 Ze=4.185 Az status=0008 Ze status=0009 05:39:36 Check angles 05:39:36 SkyScan query 05:39:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:39:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:39:36 Message to Master queued w/err=0: serial=41191 error=0 05:39:41 Received message from Master: op=Filter serial=41192 05:39:41 Color wheel filter change from 0 to 0 05:39:41 FLIGetFilterPos err=0 currentPosition=0 05:39:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:41 Filter is already there-color wheel unchanged 05:39:42 Received message from Master: op=Shutter serial=41193 05:39:42 Shutter LASER close 05:39:42 Received message from Camera: op=State serial=41195 05:39:42 GetSingleValue result=40 Value=cccccccc 05:39:42 SkyScan query 05:39:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:39:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:42 Parameters OK 05:39:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:42 Set A/D data flow result=40 05:39:42 Set A/D channel type result=40 05:39:42 Set A/D encoding result=40 05:39:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:42 Set channel filter=0.000000e+000 result=40 05:39:42 Config A/D Result=40 05:39:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:42 Get A/D filter: -9.255963e+061 result=40 05:39:42 Get A/D value=-858993460 result=40 05:39:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:42 Parameters OK 05:39:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:42 Set A/D data flow result=40 05:39:42 Set A/D channel type result=40 05:39:42 Set A/D encoding result=40 05:39:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:42 Set channel filter=0.000000e+000 result=40 05:39:42 Config A/D Result=40 05:39:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:42 Get A/D filter: -9.255963e+061 result=40 05:39:42 Get A/D value=-858993460 result=40 05:39:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:42 Aux= 05:39:42 Message to Camera, serial 41195 queued 05:40:19 Received message from Master: op=PointingHead serial=41208 05:40:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:40:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:40:20 Point started: ret=0 05:40:20 point_skyscan result=0 05:40:20 Check angles 05:40:20 SkyScan query 05:40:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:40:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:40:21 Message to Master queued w/err=0: serial=41208 error=0 05:40:26 Received message from Master: op=Filter serial=41209 05:40:26 Color wheel filter change from 0 to 0 05:40:26 FLIGetFilterPos err=0 currentPosition=0 05:40:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:26 Filter is already there-color wheel unchanged 05:40:26 Received message from Master: op=Shutter serial=41210 05:40:26 Shutter LASER close 05:40:26 Received message from Camera: op=State serial=41212 05:40:26 GetSingleValue result=40 Value=cccccccc 05:40:26 SkyScan query 05:40:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:40:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:27 Parameters OK 05:40:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:27 Set A/D data flow result=40 05:40:27 Set A/D channel type result=40 05:40:27 Set A/D encoding result=40 05:40:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:27 Set channel filter=0.000000e+000 result=40 05:40:27 Config A/D Result=40 05:40:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:27 Get A/D filter: -9.255963e+061 result=40 05:40:27 Get A/D value=-858993460 result=40 05:40:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:27 Parameters OK 05:40:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:27 Set A/D data flow result=40 05:40:27 Set A/D channel type result=40 05:40:27 Set A/D encoding result=40 05:40:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:27 Set channel filter=0.000000e+000 result=40 05:40:27 Config A/D Result=40 05:40:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:27 Get A/D filter: -9.255963e+061 result=40 05:40:27 Get A/D value=-858993460 result=40 05:40:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:27 Aux= 05:40:27 Message to Camera, serial 41212 queued 05:41:03 Received message from Master: op=PointingHead serial=41225 05:41:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:41:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:41:04 Point started: ret=0 05:41:04 point_skyscan result=0 05:41:05 Check angles 05:41:05 SkyScan query 05:41:05 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 05:41:05 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 05:41:05 Check angles 05:41:05 SkyScan query 05:41:06 SkyScan query done: ret=0 az=153.9<-10260 ze=-6.495<-12433 Statuses=0009 0008 05:41:06 Msec=750 True Az=153.9 Ze=-6.495 Az status=0009 Ze status=0008 05:41:06 Check angles 05:41:06 SkyScan query 05:41:07 SkyScan query done: ret=0 az=171.63<-11442 ze=-6.495<-12433 Statuses=0009 0008 05:41:07 Msec=1500 True Az=171.63 Ze=-6.495 Az status=0009 Ze status=0008 05:41:07 Check angles 05:41:07 SkyScan query 05:41:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:41:07 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:41:07 Message to Master queued w/err=0: serial=41225 error=0 05:41:12 Received message from Master: op=Filter serial=41226 05:41:12 Color wheel filter change from 0 to 0 05:41:12 FLIGetFilterPos err=0 currentPosition=0 05:41:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:12 Filter is already there-color wheel unchanged 05:41:13 Received message from Master: op=Shutter serial=41227 05:41:13 Shutter LASER close 05:41:13 Received message from Camera: op=State serial=41229 05:41:13 GetSingleValue result=40 Value=cccccccc 05:41:13 SkyScan query 05:41:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:41:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:13 Parameters OK 05:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:13 Set A/D data flow result=40 05:41:13 Set A/D channel type result=40 05:41:13 Set A/D encoding result=40 05:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:13 Set channel filter=0.000000e+000 result=40 05:41:13 Config A/D Result=40 05:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:13 Get A/D filter: -9.255963e+061 result=40 05:41:13 Get A/D value=-858993460 result=40 05:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:13 Parameters OK 05:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:13 Set A/D data flow result=40 05:41:13 Set A/D channel type result=40 05:41:13 Set A/D encoding result=40 05:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:13 Set channel filter=0.000000e+000 result=40 05:41:13 Config A/D Result=40 05:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:13 Get A/D filter: -9.255963e+061 result=40 05:41:13 Get A/D value=-858993460 result=40 05:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:13 Aux= 05:41:13 Message to Camera, serial 41229 queued 05:41:50 Received message from Master: op=PointingHead serial=41242 05:41:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:41:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:41:50 Point started: ret=0 05:41:50 point_skyscan result=0 05:41:51 Check angles 05:41:51 SkyScan query 05:41:52 SkyScan query done: ret=0 az=152.445<-10163 ze=6.51<-11566 Statuses=0009 0008 05:41:52 Msec=0 True Az=152.445 Ze=6.51 Az status=0009 Ze status=0008 05:41:52 Check angles 05:41:52 SkyScan query 05:41:52 SkyScan query done: ret=0 az=135<-9000 ze=6.495<-11567 Statuses=0009 0008 05:41:52 Msec=750 True Az=135 Ze=6.495 Az status=0009 Ze status=0008 05:41:53 Check angles 05:41:53 SkyScan query 05:41:53 SkyScan query done: ret=0 az=117.09<-7806 ze=6.495<-11567 Statuses=0009 0008 05:41:53 Msec=1500 True Az=117.09 Ze=6.495 Az status=0009 Ze status=0008 05:41:53 Check angles 05:41:53 SkyScan query 05:41:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:41:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:41:54 Message to Master queued w/err=0: serial=41242 error=0 05:41:59 Received message from Master: op=Filter serial=41243 05:41:59 Color wheel filter change from 0 to 0 05:41:59 FLIGetFilterPos err=0 currentPosition=0 05:41:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:59 Filter is already there-color wheel unchanged 05:41:59 Received message from Master: op=Shutter serial=41244 05:41:59 Shutter LASER close 05:41:59 Received message from Camera: op=State serial=41246 05:41:59 GetSingleValue result=40 Value=cccccccc 05:41:59 SkyScan query 05:42:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:42:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:00 Parameters OK 05:42:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:00 Set A/D data flow result=40 05:42:00 Set A/D channel type result=40 05:42:00 Set A/D encoding result=40 05:42:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:00 Set channel filter=0.000000e+000 result=40 05:42:00 Config A/D Result=40 05:42:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:00 Get A/D filter: -9.255963e+061 result=40 05:42:00 Get A/D value=-858993460 result=40 05:42:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:00 Parameters OK 05:42:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:00 Set A/D data flow result=40 05:42:00 Set A/D channel type result=40 05:42:00 Set A/D encoding result=40 05:42:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:00 Set channel filter=0.000000e+000 result=40 05:42:00 Config A/D Result=40 05:42:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:00 Get A/D filter: -9.255963e+061 result=40 05:42:00 Get A/D value=-858993460 result=40 05:42:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:00 Aux= 05:42:00 Message to Camera, serial 41246 queued 05:42:36 Received message from Master: op=PointingHead serial=41258 05:42:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:42:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:42:36 Point started: ret=0 05:42:36 point_skyscan result=0 05:42:37 Check angles 05:42:37 SkyScan query 05:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 05:42:37 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 05:42:38 Check angles 05:42:38 SkyScan query 05:42:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 05:42:38 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 05:42:38 Check angles 05:42:38 SkyScan query 05:42:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 05:42:39 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 05:42:39 Check angles 05:42:39 SkyScan query 05:42:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 05:42:40 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 05:42:40 Check angles 05:42:40 SkyScan query 05:42:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.73<-19182 Statuses=0008 0009 05:42:40 Msec=3000 True Az=112.995 Ze=-107.73 Az status=0008 Ze status=0009 05:42:41 Check angles 05:42:41 SkyScan query 05:42:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 05:42:41 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 05:42:41 Check angles 05:42:41 SkyScan query 05:42:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 05:42:42 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 05:42:42 Check angles 05:42:42 SkyScan query 05:42:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.55<-23370 Statuses=0008 0009 05:42:43 Msec=5250 True Az=112.995 Ze=-170.55 Az status=0008 Ze status=0009 05:42:43 Check angles 05:42:43 SkyScan query 05:42:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:42:43 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:42:43 Message to Master queued w/err=0: serial=41258 error=0 05:42:48 Received message from Master: op=Filter serial=41259 05:42:48 Color wheel filter change from 0 to 0 05:42:48 FLIGetFilterPos err=0 currentPosition=0 05:42:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:48 Filter is already there-color wheel unchanged 05:42:49 Received message from Master: op=Shutter serial=41260 05:42:49 Shutter LASER open 05:42:49 Received message from Camera: op=State serial=41262 05:42:49 GetSingleValue result=40 Value=cccccccc 05:42:49 SkyScan query 05:42:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:42:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:49 Parameters OK 05:42:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:49 Set A/D data flow result=40 05:42:49 Set A/D channel type result=40 05:42:49 Set A/D encoding result=40 05:42:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:49 Set channel filter=0.000000e+000 result=40 05:42:49 Config A/D Result=40 05:42:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:49 Get A/D filter: -9.255963e+061 result=40 05:42:49 Get A/D value=-858993460 result=40 05:42:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:49 Parameters OK 05:42:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:49 Set A/D data flow result=40 05:42:49 Set A/D channel type result=40 05:42:49 Set A/D encoding result=40 05:42:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:49 Set channel filter=0.000000e+000 result=40 05:42:49 Config A/D Result=40 05:42:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:49 Get A/D filter: -9.255963e+061 result=40 05:42:49 Get A/D value=-858993460 result=40 05:42:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:49 Aux= 05:42:49 Message to Camera, serial 41262 queued 05:42:58 Received message from Master: op=Shutter serial=41272 05:42:58 Shutter LASER close 05:42:58 Received message from Master: op=PointingHead serial=41276 05:42:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:42:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:42:58 Point started: ret=0 05:42:58 point_skyscan result=0 05:42:59 Check angles 05:42:59 SkyScan query 05:43:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 05:43:00 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 05:43:00 Check angles 05:43:00 SkyScan query 05:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.4<-20160 Statuses=0008 0009 05:43:01 Msec=750 True Az=112.995 Ze=-122.4 Az status=0008 Ze status=0009 05:43:01 Check angles 05:43:01 SkyScan query 05:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 05:43:01 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 05:43:01 Check angles 05:43:01 SkyScan query 05:43:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 05:43:02 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 05:43:02 Check angles 05:43:02 SkyScan query 05:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.52<-15968 Statuses=0008 0009 05:43:03 Msec=3000 True Az=112.995 Ze=-59.52 Az status=0008 Ze status=0009 05:43:03 Check angles 05:43:03 SkyScan query 05:43:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.565<-14571 Statuses=0008 0009 05:43:04 Msec=3750 True Az=112.995 Ze=-38.565 Az status=0008 Ze status=0009 05:43:04 Check angles 05:43:04 SkyScan query 05:43:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.61<-13174 Statuses=0008 0009 05:43:04 Msec=4500 True Az=112.995 Ze=-17.61 Az status=0008 Ze status=0009 05:43:04 Check angles 05:43:04 SkyScan query 05:43:05 SkyScan query done: ret=0 az=112.995<-7533 ze=3.345<-11777 Statuses=0008 0009 05:43:05 Msec=5250 True Az=112.995 Ze=3.345 Az status=0008 Ze status=0009 05:43:05 Check angles 05:43:05 SkyScan query 05:43:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:43:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:43:06 Message to Master queued w/err=0: serial=41276 error=0 05:43:11 Received message from Master: op=Filter serial=41277 05:43:11 Color wheel filter change from 0 to 0 05:43:11 FLIGetFilterPos err=0 currentPosition=0 05:43:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:11 Filter is already there-color wheel unchanged 05:43:11 Received message from Master: op=Shutter serial=41278 05:43:11 Shutter LASER close 05:43:11 Received message from Camera: op=State serial=41280 05:43:11 GetSingleValue result=40 Value=cccccccc 05:43:11 SkyScan query 05:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:12 Parameters OK 05:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:12 Set A/D data flow result=40 05:43:12 Set A/D channel type result=40 05:43:12 Set A/D encoding result=40 05:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:12 Set channel filter=0.000000e+000 result=40 05:43:12 Config A/D Result=40 05:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:12 Get A/D filter: -9.255963e+061 result=40 05:43:12 Get A/D value=-858993460 result=40 05:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:12 Parameters OK 05:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:12 Set A/D data flow result=40 05:43:12 Set A/D channel type result=40 05:43:12 Set A/D encoding result=40 05:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:12 Set channel filter=0.000000e+000 result=40 05:43:12 Config A/D Result=40 05:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:12 Get A/D filter: -9.255963e+061 result=40 05:43:12 Get A/D value=-858993460 result=40 05:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:12 Aux= 05:43:12 Message to Camera, serial 41280 queued 05:43:49 Received message from Master: op=PointingHead serial=41293 05:43:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:43:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:43:49 Point started: ret=0 05:43:49 point_skyscan result=0 05:43:50 Check angles 05:43:50 SkyScan query 05:43:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:43:50 Message to Master queued w/err=0: serial=41293 error=0 [UTC 2019-3-1 05:43:50] 05:43:55 Received message from Master: op=Filter serial=41294 05:43:55 Color wheel filter change from 0 to 0 05:43:55 FLIGetFilterPos err=0 currentPosition=0 05:43:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:55 Filter is already there-color wheel unchanged 05:43:55 Received message from Master: op=Shutter serial=41295 05:43:55 Shutter LASER close 05:43:55 Received message from Camera: op=State serial=41297 05:43:55 GetSingleValue result=40 Value=cccccccc 05:43:55 SkyScan query 05:43:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:56 Parameters OK 05:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:56 Set A/D data flow result=40 05:43:56 Set A/D channel type result=40 05:43:56 Set A/D encoding result=40 05:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:56 Set channel filter=0.000000e+000 result=40 05:43:56 Config A/D Result=40 05:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:56 Get A/D filter: -9.255963e+061 result=40 05:43:56 Get A/D value=-858993460 result=40 05:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:56 Parameters OK 05:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:56 Set A/D data flow result=40 05:43:56 Set A/D channel type result=40 05:43:56 Set A/D encoding result=40 05:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:56 Set channel filter=0.000000e+000 result=40 05:43:56 Config A/D Result=40 05:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:56 Get A/D filter: -9.255963e+061 result=40 05:43:56 Get A/D value=-858993460 result=40 05:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:56 Aux= 05:43:56 Message to Camera, serial 41297 queued 05:44:33 Received message from Master: op=PointingHead serial=41310 05:44:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:44:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:44:33 Point started: ret=0 05:44:33 point_skyscan result=0 05:44:34 Check angles 05:44:34 SkyScan query 05:44:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:44:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:44:35 Message to Master queued w/err=0: serial=41310 error=0 05:44:40 Received message from Master: op=Filter serial=41311 05:44:40 Color wheel filter change from 0 to 0 05:44:40 FLIGetFilterPos err=0 currentPosition=0 05:44:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:40 Filter is already there-color wheel unchanged 05:44:40 Received message from Master: op=Shutter serial=41312 05:44:40 Shutter LASER close 05:44:40 Received message from Camera: op=State serial=41314 05:44:40 GetSingleValue result=40 Value=cccccccc 05:44:40 SkyScan query 05:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:44:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:40 Parameters OK 05:44:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:40 Set A/D data flow result=40 05:44:40 Set A/D channel type result=40 05:44:40 Set A/D encoding result=40 05:44:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:40 Set channel filter=0.000000e+000 result=40 05:44:40 Config A/D Result=40 05:44:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:40 Get A/D filter: -9.255963e+061 result=40 05:44:40 Get A/D value=-858993460 result=40 05:44:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:40 Parameters OK 05:44:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:40 Set A/D data flow result=40 05:44:40 Set A/D channel type result=40 05:44:40 Set A/D encoding result=40 05:44:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:40 Set channel filter=0.000000e+000 result=40 05:44:40 Config A/D Result=40 05:44:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:40 Get A/D filter: -9.255963e+061 result=40 05:44:40 Get A/D value=-858993460 result=40 05:44:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:40 Aux= 05:44:40 Message to Camera, serial 41314 queued 05:45:17 Received message from Master: op=PointingHead serial=41327 05:45:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:45:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:45:17 Point started: ret=0 05:45:17 point_skyscan result=0 05:45:18 Check angles 05:45:18 SkyScan query 05:45:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:45:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:45:19 Message to Master queued w/err=0: serial=41327 error=0 05:45:24 Received message from Master: op=Filter serial=41328 05:45:24 Color wheel filter change from 0 to 0 05:45:24 FLIGetFilterPos err=0 currentPosition=0 05:45:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:24 Filter is already there-color wheel unchanged 05:45:24 Received message from Master: op=Shutter serial=41329 05:45:24 Shutter LASER close 05:45:24 Received message from Camera: op=State serial=41331 05:45:24 GetSingleValue result=40 Value=cccccccc 05:45:24 SkyScan query 05:45:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:45:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:25 Parameters OK 05:45:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:25 Set A/D data flow result=40 05:45:25 Set A/D channel type result=40 05:45:25 Set A/D encoding result=40 05:45:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:25 Set channel filter=0.000000e+000 result=40 05:45:25 Config A/D Result=40 05:45:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:25 Get A/D filter: -9.255963e+061 result=40 05:45:25 Get A/D value=-858993460 result=40 05:45:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:25 Parameters OK 05:45:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:25 Set A/D data flow result=40 05:45:25 Set A/D channel type result=40 05:45:25 Set A/D encoding result=40 05:45:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:25 Set channel filter=0.000000e+000 result=40 05:45:25 Config A/D Result=40 05:45:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:25 Get A/D filter: -9.255963e+061 result=40 05:45:25 Get A/D value=-858993460 result=40 05:45:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:25 Aux= 05:45:25 Message to Camera, serial 41331 queued 05:46:01 Received message from Master: op=PointingHead serial=41344 05:46:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:46:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:46:02 Point started: ret=0 05:46:02 point_skyscan result=0 05:46:03 Check angles 05:46:03 SkyScan query 05:46:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 05:46:03 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 05:46:03 Check angles 05:46:03 SkyScan query 05:46:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.01<-14934 Statuses=0008 0009 05:46:04 Msec=750 True Az=112.995 Ze=-44.01 Az status=0008 Ze status=0009 05:46:04 Check angles 05:46:04 SkyScan query 05:46:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 05:46:05 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 05:46:05 Check angles 05:46:05 SkyScan query 05:46:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.92<-17728 Statuses=0008 0009 05:46:05 Msec=2250 True Az=112.995 Ze=-85.92 Az status=0008 Ze status=0009 05:46:06 Check angles 05:46:06 SkyScan query 05:46:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 05:46:06 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 05:46:06 Check angles 05:46:06 SkyScan query 05:46:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.235<-20549 Statuses=0008 0009 05:46:07 Msec=3750 True Az=112.995 Ze=-128.235 Az status=0008 Ze status=0009 05:46:07 Check angles 05:46:07 SkyScan query 05:46:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.205<-21947 Statuses=0008 0009 05:46:08 Msec=4500 True Az=112.995 Ze=-149.205 Az status=0008 Ze status=0009 05:46:08 Check angles 05:46:08 SkyScan query 05:46:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.16<-23344 Statuses=0008 0009 05:46:08 Msec=5250 True Az=112.995 Ze=-170.16 Az status=0008 Ze status=0009 05:46:09 Check angles 05:46:09 SkyScan query 05:46:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:46:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:46:09 Message to Master queued w/err=0: serial=41344 error=0 05:46:14 Received message from Master: op=Filter serial=41345 05:46:14 Color wheel filter change from 0 to 0 05:46:14 FLIGetFilterPos err=0 currentPosition=0 05:46:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:14 Filter is already there-color wheel unchanged 05:46:14 Received message from Master: op=Shutter serial=41346 05:46:14 Shutter LASER open 05:46:14 Received message from Camera: op=State serial=41348 05:46:14 GetSingleValue result=40 Value=cccccccc 05:46:14 SkyScan query 05:46:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:46:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:15 Parameters OK 05:46:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:15 Set A/D data flow result=40 05:46:15 Set A/D channel type result=40 05:46:15 Set A/D encoding result=40 05:46:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:15 Set channel filter=0.000000e+000 result=40 05:46:15 Config A/D Result=40 05:46:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:15 Get A/D filter: -9.255963e+061 result=40 05:46:15 Get A/D value=-858993460 result=40 05:46:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:15 Parameters OK 05:46:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:15 Set A/D data flow result=40 05:46:15 Set A/D channel type result=40 05:46:15 Set A/D encoding result=40 05:46:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:15 Set channel filter=0.000000e+000 result=40 05:46:15 Config A/D Result=40 05:46:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:15 Get A/D filter: -9.255963e+061 result=40 05:46:15 Get A/D value=-858993460 result=40 05:46:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:15 Aux= 05:46:15 Message to Camera, serial 41348 queued 05:46:23 Received message from Master: op=Shutter serial=41358 05:46:23 Shutter LASER close 05:46:24 Received message from Master: op=PointingHead serial=41362 05:46:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:46:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:46:24 Point started: ret=0 05:46:24 point_skyscan result=0 05:46:25 Check angles 05:46:25 SkyScan query 05:46:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 05:46:26 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 05:46:26 Check angles 05:46:26 SkyScan query 05:46:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 05:46:26 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 05:46:27 Check angles 05:46:27 SkyScan query 05:46:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 05:46:27 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 05:46:27 Check angles 05:46:27 SkyScan query 05:46:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.83<-17322 Statuses=0008 0009 05:46:28 Msec=2250 True Az=112.995 Ze=-79.83 Az status=0008 Ze status=0009 05:46:28 Check angles 05:46:28 SkyScan query 05:46:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.875<-15925 Statuses=0008 0009 05:46:29 Msec=3000 True Az=112.995 Ze=-58.875 Az status=0008 Ze status=0009 05:46:29 Check angles 05:46:29 SkyScan query 05:46:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 05:46:29 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 05:46:30 Check angles 05:46:30 SkyScan query 05:46:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.935<-13129 Statuses=0008 0009 05:46:30 Msec=4500 True Az=112.995 Ze=-16.935 Az status=0008 Ze status=0009 05:46:30 Check angles 05:46:30 SkyScan query 05:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=4.38<-11708 Statuses=0008 0009 05:46:31 Msec=5250 True Az=112.995 Ze=4.38 Az status=0008 Ze status=0009 05:46:31 Check angles 05:46:31 SkyScan query 05:46:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:46:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:46:32 Message to Master queued w/err=0: serial=41362 error=0 05:46:37 Received message from Master: op=Filter serial=41363 05:46:37 Color wheel filter change from 0 to 0 05:46:37 FLIGetFilterPos err=0 currentPosition=0 05:46:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:37 Filter is already there-color wheel unchanged 05:46:37 Received message from Master: op=Shutter serial=41364 05:46:37 Shutter LASER close 05:46:37 Received message from Camera: op=State serial=41366 05:46:37 GetSingleValue result=40 Value=cccccccc 05:46:37 SkyScan query 05:46:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:46:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:38 Parameters OK 05:46:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:38 Set A/D data flow result=40 05:46:38 Set A/D channel type result=40 05:46:38 Set A/D encoding result=40 05:46:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:38 Set channel filter=0.000000e+000 result=40 05:46:38 Config A/D Result=40 05:46:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:38 Get A/D filter: -9.255963e+061 result=40 05:46:38 Get A/D value=-858993460 result=40 05:46:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:38 Parameters OK 05:46:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:38 Set A/D data flow result=40 05:46:38 Set A/D channel type result=40 05:46:38 Set A/D encoding result=40 05:46:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:38 Set channel filter=0.000000e+000 result=40 05:46:38 Config A/D Result=40 05:46:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:38 Get A/D filter: -9.255963e+061 result=40 05:46:38 Get A/D value=-858993460 result=40 05:46:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:38 Aux= 05:46:38 Message to Camera, serial 41366 queued 05:47:15 Received message from Master: op=PointingHead serial=41379 05:47:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:47:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:47:15 Point started: ret=0 05:47:15 point_skyscan result=0 05:47:16 Check angles 05:47:16 SkyScan query 05:47:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:47:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:47:16 Message to Master queued w/err=0: serial=41379 error=0 05:47:21 Received message from Master: op=Filter serial=41380 05:47:21 Color wheel filter change from 0 to 0 05:47:21 FLIGetFilterPos err=0 currentPosition=0 05:47:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:21 Filter is already there-color wheel unchanged 05:47:21 Received message from Master: op=Shutter serial=41381 05:47:21 Shutter LASER close 05:47:21 Received message from Camera: op=State serial=41383 05:47:21 GetSingleValue result=40 Value=cccccccc 05:47:21 SkyScan query 05:47:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:47:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:22 Parameters OK 05:47:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:22 Set A/D data flow result=40 05:47:22 Set A/D channel type result=40 05:47:22 Set A/D encoding result=40 05:47:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:22 Set channel filter=0.000000e+000 result=40 05:47:22 Config A/D Result=40 05:47:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:22 Get A/D filter: -9.255963e+061 result=40 05:47:22 Get A/D value=-858993460 result=40 05:47:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:22 Parameters OK 05:47:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:22 Set A/D data flow result=40 05:47:22 Set A/D channel type result=40 05:47:22 Set A/D encoding result=40 05:47:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:22 Set channel filter=0.000000e+000 result=40 05:47:22 Config A/D Result=40 05:47:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:22 Get A/D filter: -9.255963e+061 result=40 05:47:22 Get A/D value=-858993460 result=40 05:47:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:22 Aux= 05:47:22 Message to Camera, serial 41383 queued 05:47:59 Received message from Master: op=PointingHead serial=41396 05:47:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:47:59 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:47:59 Point started: ret=0 05:47:59 point_skyscan result=0 05:48:00 Check angles 05:48:00 SkyScan query 05:48:01 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.495<-12433 Statuses=0009 0008 05:48:01 Msec=0 True Az=135.705 Ze=-6.495 Az status=0009 Ze status=0008 05:48:01 Check angles 05:48:01 SkyScan query 05:48:01 SkyScan query done: ret=0 az=153.195<-10213 ze=-6.48<-12432 Statuses=0009 0008 05:48:01 Msec=750 True Az=153.195 Ze=-6.48 Az status=0009 Ze status=0008 05:48:01 Check angles 05:48:01 SkyScan query 05:48:02 SkyScan query done: ret=0 az=171.015<-11401 ze=-6.48<-12432 Statuses=0009 0008 05:48:02 Msec=1500 True Az=171.015 Ze=-6.48 Az status=0009 Ze status=0008 05:48:02 Check angles 05:48:02 SkyScan query 05:48:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 05:48:03 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 05:48:03 Message to Master queued w/err=0: serial=41396 error=0 05:48:08 Received message from Master: op=Filter serial=41397 05:48:08 Color wheel filter change from 0 to 0 05:48:08 FLIGetFilterPos err=0 currentPosition=0 05:48:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:08 Filter is already there-color wheel unchanged 05:48:08 Received message from Master: op=Shutter serial=41398 05:48:08 Shutter LASER close 05:48:08 Received message from Camera: op=State serial=41400 05:48:08 GetSingleValue result=40 Value=cccccccc 05:48:08 SkyScan query 05:48:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 05:48:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:09 Parameters OK 05:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:09 Set A/D data flow result=40 05:48:09 Set A/D channel type result=40 05:48:09 Set A/D encoding result=40 05:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:09 Set channel filter=0.000000e+000 result=40 05:48:09 Config A/D Result=40 05:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:09 Get A/D filter: -9.255963e+061 result=40 05:48:09 Get A/D value=-858993460 result=40 05:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:09 Parameters OK 05:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:09 Set A/D data flow result=40 05:48:09 Set A/D channel type result=40 05:48:09 Set A/D encoding result=40 05:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:09 Set channel filter=0.000000e+000 result=40 05:48:09 Config A/D Result=40 05:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:09 Get A/D filter: -9.255963e+061 result=40 05:48:09 Get A/D value=-858993460 result=40 05:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:09 Aux= 05:48:09 Message to Camera, serial 41400 queued 05:48:45 Received message from Master: op=PointingHead serial=41412 05:48:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:48:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:48:45 Point started: ret=0 05:48:45 point_skyscan result=0 05:48:46 Check angles 05:48:46 SkyScan query 05:48:46 SkyScan query done: ret=0 az=153.09<-10206 ze=6.51<-11566 Statuses=0009 0008 05:48:46 Msec=0 True Az=153.09 Ze=6.51 Az status=0009 Ze status=0008 05:48:46 Check angles 05:48:46 SkyScan query 05:48:47 SkyScan query done: ret=0 az=135.63<-9042 ze=6.495<-11567 Statuses=0009 0008 05:48:47 Msec=750 True Az=135.63 Ze=6.495 Az status=0009 Ze status=0008 05:48:47 Check angles 05:48:47 SkyScan query 05:48:48 SkyScan query done: ret=0 az=117.75<-7850 ze=6.495<-11567 Statuses=0009 0008 05:48:48 Msec=1500 True Az=117.75 Ze=6.495 Az status=0009 Ze status=0008 05:48:48 Check angles 05:48:48 SkyScan query 05:48:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:48:48 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:48:48 Message to Master queued w/err=0: serial=41412 error=0 05:48:53 Received message from Master: op=Filter serial=41413 05:48:53 Color wheel filter change from 0 to 0 05:48:53 FLIGetFilterPos err=0 currentPosition=0 05:48:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:53 Filter is already there-color wheel unchanged 05:48:54 Received message from Master: op=Shutter serial=41414 05:48:54 Shutter LASER close 05:48:54 Received message from Camera: op=State serial=41416 05:48:54 GetSingleValue result=40 Value=cccccccc 05:48:54 SkyScan query 05:48:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:48:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:54 Parameters OK 05:48:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:54 Set A/D data flow result=40 05:48:54 Set A/D channel type result=40 05:48:54 Set A/D encoding result=40 05:48:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:54 Set channel filter=0.000000e+000 result=40 05:48:54 Config A/D Result=40 05:48:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:54 Get A/D filter: -9.255963e+061 result=40 05:48:54 Get A/D value=-858993460 result=40 05:48:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:54 Parameters OK 05:48:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:54 Set A/D data flow result=40 05:48:54 Set A/D channel type result=40 05:48:54 Set A/D encoding result=40 05:48:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:54 Set channel filter=0.000000e+000 result=40 05:48:54 Config A/D Result=40 05:48:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:54 Get A/D filter: -9.255963e+061 result=40 05:48:54 Get A/D value=-858993460 result=40 05:48:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:54 Aux= 05:48:54 Message to Camera, serial 41416 queued 05:49:31 Received message from Master: op=PointingHead serial=41429 05:49:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:49:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:49:31 Point started: ret=0 05:49:31 point_skyscan result=0 05:49:32 Check angles 05:49:32 SkyScan query 05:49:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 05:49:33 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 05:49:33 Check angles 05:49:33 SkyScan query 05:49:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 05:49:33 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 05:49:34 Check angles 05:49:34 SkyScan query 05:49:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.06<-16404 Statuses=0008 0009 05:49:34 Msec=1500 True Az=112.995 Ze=-66.06 Az status=0008 Ze status=0009 05:49:34 Check angles 05:49:34 SkyScan query 05:49:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.015<-17801 Statuses=0008 0009 05:49:35 Msec=2250 True Az=112.995 Ze=-87.015 Az status=0008 Ze status=0009 05:49:35 Check angles 05:49:35 SkyScan query 05:49:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 05:49:36 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 05:49:36 Check angles 05:49:36 SkyScan query 05:49:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.36<-20624 Statuses=0008 0009 05:49:37 Msec=3750 True Az=112.995 Ze=-129.36 Az status=0008 Ze status=0009 05:49:37 Check angles 05:49:37 SkyScan query 05:49:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.72<-22048 Statuses=0008 0009 05:49:37 Msec=4500 True Az=112.995 Ze=-150.72 Az status=0008 Ze status=0009 05:49:37 Check angles 05:49:37 SkyScan query 05:49:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0008 0009 05:49:38 Msec=5250 True Az=112.995 Ze=-171.435 Az status=0008 Ze status=0009 05:49:38 Check angles 05:49:38 SkyScan query 05:49:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:49:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:49:39 Message to Master queued w/err=0: serial=41429 error=0 05:49:44 Received message from Master: op=Filter serial=41430 05:49:44 Color wheel filter change from 0 to 0 05:49:44 FLIGetFilterPos err=0 currentPosition=0 05:49:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:44 Filter is already there-color wheel unchanged 05:49:44 Received message from Master: op=Shutter serial=41431 05:49:44 Shutter LASER open 05:49:44 Received message from Camera: op=State serial=41433 05:49:44 GetSingleValue result=40 Value=cccccccc 05:49:44 SkyScan query 05:49:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:49:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:45 Parameters OK 05:49:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:45 Set A/D data flow result=40 05:49:45 Set A/D channel type result=40 05:49:45 Set A/D encoding result=40 05:49:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:45 Set channel filter=0.000000e+000 result=40 05:49:45 Config A/D Result=40 05:49:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:45 Get A/D filter: -9.255963e+061 result=40 05:49:45 Get A/D value=-858993460 result=40 05:49:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:45 Parameters OK 05:49:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:45 Set A/D data flow result=40 05:49:45 Set A/D channel type result=40 05:49:45 Set A/D encoding result=40 05:49:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:45 Set channel filter=0.000000e+000 result=40 05:49:45 Config A/D Result=40 05:49:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:45 Get A/D filter: -9.255963e+061 result=40 05:49:45 Get A/D value=-858993460 result=40 05:49:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:45 Aux= 05:49:45 Message to Camera, serial 41433 queued 05:49:53 Received message from Master: op=Shutter serial=41443 05:49:53 Shutter LASER close 05:49:54 Received message from Master: op=PointingHead serial=41447 05:49:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:49:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:49:54 Point started: ret=0 05:49:54 point_skyscan result=0 05:49:55 Check angles 05:49:55 SkyScan query 05:49:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 05:49:55 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 05:49:55 Check angles 05:49:55 SkyScan query 05:49:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 05:49:56 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 05:49:56 Check angles 05:49:56 SkyScan query 05:49:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.8<-18720 Statuses=0008 0009 05:49:57 Msec=1500 True Az=112.995 Ze=-100.8 Az status=0008 Ze status=0009 05:49:57 Check angles 05:49:57 SkyScan query 05:49:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.395<-17293 Statuses=0008 0009 05:49:58 Msec=2250 True Az=112.995 Ze=-79.395 Az status=0008 Ze status=0009 05:49:58 Check angles 05:49:58 SkyScan query 05:49:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 05:49:58 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 05:49:58 Check angles 05:49:58 SkyScan query 05:49:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.515<-14501 Statuses=0008 0009 05:49:59 Msec=3750 True Az=112.995 Ze=-37.515 Az status=0008 Ze status=0009 05:49:59 Check angles 05:49:59 SkyScan query 05:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.53<-13102 Statuses=0008 0009 05:50:00 Msec=4500 True Az=112.995 Ze=-16.53 Az status=0008 Ze status=0009 05:50:00 Check angles 05:50:00 SkyScan query 05:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=4.35<-11710 Statuses=0008 0009 05:50:01 Msec=5250 True Az=112.995 Ze=4.35 Az status=0008 Ze status=0009 05:50:01 Check angles 05:50:01 SkyScan query 05:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:50:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:50:01 Message to Master queued w/err=0: serial=41447 error=0 05:50:06 Received message from Master: op=Filter serial=41448 05:50:06 Color wheel filter change from 0 to 0 05:50:06 FLIGetFilterPos err=0 currentPosition=0 05:50:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:06 Filter is already there-color wheel unchanged 05:50:06 Received message from Master: op=Shutter serial=41449 05:50:06 Shutter LASER close 05:50:07 Received message from Camera: op=State serial=41451 05:50:07 GetSingleValue result=40 Value=cccccccc 05:50:07 SkyScan query 05:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:50:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:07 Parameters OK 05:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:07 Set A/D data flow result=40 05:50:07 Set A/D channel type result=40 05:50:07 Set A/D encoding result=40 05:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:07 Set channel filter=0.000000e+000 result=40 05:50:07 Config A/D Result=40 05:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:07 Get A/D filter: -9.255963e+061 result=40 05:50:07 Get A/D value=-858993460 result=40 05:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:07 Parameters OK 05:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:07 Set A/D data flow result=40 05:50:07 Set A/D channel type result=40 05:50:07 Set A/D encoding result=40 05:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:07 Set channel filter=0.000000e+000 result=40 05:50:07 Config A/D Result=40 05:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:07 Get A/D filter: -9.255963e+061 result=40 05:50:07 Get A/D value=-858993460 result=40 05:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:07 Aux= 05:50:07 Message to Camera, serial 41451 queued 05:50:44 Received message from Master: op=PointingHead serial=41464 05:50:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:50:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:50:44 Point started: ret=0 05:50:44 point_skyscan result=0 05:50:45 Check angles 05:50:45 SkyScan query 05:50:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:50:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:50:46 Message to Master queued w/err=0: serial=41464 error=0 05:50:51 Received message from Master: op=Filter serial=41465 05:50:51 Color wheel filter change from 0 to 0 05:50:51 FLIGetFilterPos err=0 currentPosition=0 05:50:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:51 Filter is already there-color wheel unchanged 05:50:51 Received message from Master: op=Shutter serial=41466 05:50:51 Shutter LASER close 05:50:51 Received message from Camera: op=State serial=41468 05:50:51 GetSingleValue result=40 Value=cccccccc 05:50:51 SkyScan query 05:50:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:50:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:51 Parameters OK 05:50:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:51 Set A/D data flow result=40 05:50:51 Set A/D channel type result=40 05:50:51 Set A/D encoding result=40 05:50:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:51 Set channel filter=0.000000e+000 result=40 05:50:51 Config A/D Result=40 05:50:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:51 Get A/D filter: -9.255963e+061 result=40 05:50:51 Get A/D value=-858993460 result=40 05:50:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:51 Parameters OK 05:50:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:51 Set A/D data flow result=40 05:50:51 Set A/D channel type result=40 05:50:51 Set A/D encoding result=40 05:50:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:51 Set channel filter=0.000000e+000 result=40 05:50:51 Config A/D Result=40 05:50:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:51 Get A/D filter: -9.255963e+061 result=40 05:50:51 Get A/D value=-858993460 result=40 05:50:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:51 Aux= 05:50:51 Message to Camera, serial 41468 queued 05:51:28 Received message from Master: op=PointingHead serial=41481 05:51:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:51:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:51:29 Point started: ret=0 05:51:29 point_skyscan result=0 05:51:29 Check angles 05:51:29 SkyScan query 05:51:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:51:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:51:30 Message to Master queued w/err=0: serial=41481 error=0 05:51:35 Received message from Master: op=Filter serial=41482 05:51:35 Color wheel filter change from 0 to 0 05:51:35 FLIGetFilterPos err=0 currentPosition=0 05:51:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:35 Filter is already there-color wheel unchanged 05:51:35 Received message from Master: op=Shutter serial=41483 05:51:35 Shutter LASER close 05:51:35 Received message from Camera: op=State serial=41485 05:51:35 GetSingleValue result=40 Value=cccccccc 05:51:35 SkyScan query 05:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:51:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:36 Parameters OK 05:51:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:36 Set A/D data flow result=40 05:51:36 Set A/D channel type result=40 05:51:36 Set A/D encoding result=40 05:51:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:36 Set channel filter=0.000000e+000 result=40 05:51:36 Config A/D Result=40 05:51:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:36 Get A/D filter: -9.255963e+061 result=40 05:51:36 Get A/D value=-858993460 result=40 05:51:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:36 Parameters OK 05:51:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:36 Set A/D data flow result=40 05:51:36 Set A/D channel type result=40 05:51:36 Set A/D encoding result=40 05:51:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:36 Set channel filter=0.000000e+000 result=40 05:51:36 Config A/D Result=40 05:51:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:36 Get A/D filter: -9.255963e+061 result=40 05:51:36 Get A/D value=-858993460 result=40 05:51:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:36 Aux= 05:51:36 Message to Camera, serial 41485 queued 05:52:13 Received message from Master: op=PointingHead serial=41498 05:52:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:52:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:52:13 Point started: ret=0 05:52:13 point_skyscan result=0 05:52:14 Check angles 05:52:14 SkyScan query 05:52:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:52:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:52:14 Message to Master queued w/err=0: serial=41498 error=0 05:52:19 Received message from Master: op=Filter serial=41499 05:52:19 Color wheel filter change from 0 to 0 05:52:19 FLIGetFilterPos err=0 currentPosition=0 05:52:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:19 Filter is already there-color wheel unchanged 05:52:20 Received message from Master: op=Shutter serial=41500 05:52:20 Shutter LASER close 05:52:20 Received message from Camera: op=State serial=41502 05:52:20 GetSingleValue result=40 Value=cccccccc 05:52:20 SkyScan query 05:52:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:52:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:20 Parameters OK 05:52:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:20 Set A/D data flow result=40 05:52:20 Set A/D channel type result=40 05:52:20 Set A/D encoding result=40 05:52:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:20 Set channel filter=0.000000e+000 result=40 05:52:20 Config A/D Result=40 05:52:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:20 Get A/D filter: -9.255963e+061 result=40 05:52:20 Get A/D value=-858993460 result=40 05:52:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:20 Parameters OK 05:52:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:20 Set A/D data flow result=40 05:52:20 Set A/D channel type result=40 05:52:20 Set A/D encoding result=40 05:52:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:20 Set channel filter=0.000000e+000 result=40 05:52:20 Config A/D Result=40 05:52:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:20 Get A/D filter: -9.255963e+061 result=40 05:52:20 Get A/D value=-858993460 result=40 05:52:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:20 Aux= 05:52:20 Message to Camera, serial 41502 queued 05:52:57 Received message from Master: op=PointingHead serial=41515 05:52:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:52:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:52:57 Point started: ret=0 05:52:57 point_skyscan result=0 05:52:58 Check angles 05:52:58 SkyScan query 05:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 05:52:59 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 05:52:59 Check angles 05:52:59 SkyScan query 05:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.94<-14996 Statuses=0008 0009 05:52:59 Msec=750 True Az=112.995 Ze=-44.94 Az status=0008 Ze status=0009 05:53:00 Check angles 05:53:00 SkyScan query 05:53:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.88<-16392 Statuses=0008 0009 05:53:00 Msec=1500 True Az=112.995 Ze=-65.88 Az status=0008 Ze status=0009 05:53:00 Check angles 05:53:00 SkyScan query 05:53:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.835<-17789 Statuses=0008 0009 05:53:01 Msec=2250 True Az=112.995 Ze=-86.835 Az status=0008 Ze status=0009 05:53:01 Check angles 05:53:01 SkyScan query 05:53:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.225<-19215 Statuses=0008 0009 05:53:02 Msec=3000 True Az=112.995 Ze=-108.225 Az status=0008 Ze status=0009 05:53:02 Check angles 05:53:02 SkyScan query 05:53:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.18<-20612 Statuses=0008 0009 05:53:02 Msec=3750 True Az=112.995 Ze=-129.18 Az status=0008 Ze status=0009 05:53:03 Check angles 05:53:03 SkyScan query 05:53:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.135<-22009 Statuses=0008 0009 05:53:03 Msec=4500 True Az=112.995 Ze=-150.135 Az status=0008 Ze status=0009 05:53:03 Check angles 05:53:03 SkyScan query 05:53:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0008 0009 05:53:04 Msec=5250 True Az=112.995 Ze=-171.3 Az status=0008 Ze status=0009 05:53:04 Check angles 05:53:04 SkyScan query 05:53:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:53:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:53:05 Message to Master queued w/err=0: serial=41515 error=0 05:53:10 Received message from Master: op=Filter serial=41516 05:53:10 Color wheel filter change from 0 to 0 05:53:10 FLIGetFilterPos err=0 currentPosition=0 05:53:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:10 Filter is already there-color wheel unchanged 05:53:10 Received message from Master: op=Shutter serial=41517 05:53:10 Shutter LASER open 05:53:10 Received message from Camera: op=State serial=41519 05:53:10 GetSingleValue result=40 Value=cccccccc 05:53:10 SkyScan query 05:53:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:53:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:11 Parameters OK 05:53:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:11 Set A/D data flow result=40 05:53:11 Set A/D channel type result=40 05:53:11 Set A/D encoding result=40 05:53:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:11 Set channel filter=0.000000e+000 result=40 05:53:11 Config A/D Result=40 05:53:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:11 Get A/D filter: -9.255963e+061 result=40 05:53:11 Get A/D value=-858993460 result=40 05:53:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:11 Parameters OK 05:53:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:11 Set A/D data flow result=40 05:53:11 Set A/D channel type result=40 05:53:11 Set A/D encoding result=40 05:53:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:11 Set channel filter=0.000000e+000 result=40 05:53:11 Config A/D Result=40 05:53:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:11 Get A/D filter: -9.255963e+061 result=40 05:53:11 Get A/D value=-858993460 result=40 05:53:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:11 Aux= 05:53:11 Message to Camera, serial 41519 queued 05:53:19 Received message from Master: op=Shutter serial=41529 05:53:19 Shutter LASER close 05:53:20 Received message from Master: op=PointingHead serial=41533 05:53:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:53:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:53:20 Point started: ret=0 05:53:20 point_skyscan result=0 05:53:21 Check angles 05:53:21 SkyScan query 05:53:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 05:53:21 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 05:53:21 Check angles 05:53:21 SkyScan query 05:53:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 05:53:22 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 05:53:22 Check angles 05:53:22 SkyScan query 05:53:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 05:53:23 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 05:53:23 Check angles 05:53:23 SkyScan query 05:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.475<-17365 Statuses=0008 0009 05:53:24 Msec=2250 True Az=112.995 Ze=-80.475 Az status=0008 Ze status=0009 05:53:24 Check angles 05:53:24 SkyScan query 05:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.52<-15968 Statuses=0008 0009 05:53:24 Msec=3000 True Az=112.995 Ze=-59.52 Az status=0008 Ze status=0009 05:53:24 Check angles 05:53:24 SkyScan query 05:53:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.55<-14570 Statuses=0008 0009 05:53:25 Msec=3750 True Az=112.995 Ze=-38.55 Az status=0008 Ze status=0009 05:53:25 Check angles 05:53:25 SkyScan query 05:53:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.61<-13174 Statuses=0008 0009 05:53:26 Msec=4500 True Az=112.995 Ze=-17.61 Az status=0008 Ze status=0009 05:53:26 Check angles 05:53:26 SkyScan query 05:53:27 SkyScan query done: ret=0 az=112.995<-7533 ze=3.345<-11777 Statuses=0008 0009 05:53:27 Msec=5250 True Az=112.995 Ze=3.345 Az status=0008 Ze status=0009 05:53:27 Check angles 05:53:27 SkyScan query 05:53:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:53:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:53:27 Message to Master queued w/err=0: serial=41533 error=0 05:53:32 Received message from Master: op=Filter serial=41534 05:53:32 Color wheel filter change from 0 to 0 05:53:32 FLIGetFilterPos err=0 currentPosition=0 05:53:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:32 Filter is already there-color wheel unchanged 05:53:32 Received message from Master: op=Shutter serial=41535 05:53:32 Shutter LASER close 05:53:33 Received message from Camera: op=State serial=41537 05:53:33 GetSingleValue result=40 Value=cccccccc 05:53:33 SkyScan query 05:53:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:53:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:33 Parameters OK 05:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:33 Set A/D data flow result=40 05:53:33 Set A/D channel type result=40 05:53:33 Set A/D encoding result=40 05:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:33 Set channel filter=0.000000e+000 result=40 05:53:33 Config A/D Result=40 05:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:33 Get A/D filter: -9.255963e+061 result=40 05:53:33 Get A/D value=-858993460 result=40 05:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:33 Parameters OK 05:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:33 Set A/D data flow result=40 05:53:33 Set A/D channel type result=40 05:53:33 Set A/D encoding result=40 05:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:33 Set channel filter=0.000000e+000 result=40 05:53:33 Config A/D Result=40 05:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:33 Get A/D filter: -9.255963e+061 result=40 05:53:33 Get A/D value=-858993460 result=40 05:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:33 Aux= 05:53:33 Message to Camera, serial 41537 queued 05:54:10 Received message from Master: op=PointingHead serial=41550 05:54:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:54:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:54:10 Point started: ret=0 05:54:10 point_skyscan result=0 05:54:11 Check angles 05:54:11 SkyScan query 05:54:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:54:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:54:12 Message to Master queued w/err=0: serial=41550 error=0 05:54:17 Received message from Master: op=Filter serial=41551 05:54:17 Color wheel filter change from 0 to 0 05:54:17 FLIGetFilterPos err=0 currentPosition=0 05:54:17 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:17 Filter is already there-color wheel unchanged 05:54:17 Received message from Master: op=Shutter serial=41552 05:54:17 Shutter LASER close 05:54:17 Received message from Camera: op=State serial=41554 05:54:17 GetSingleValue result=40 Value=cccccccc 05:54:17 SkyScan query 05:54:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:54:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 [UTC 2019-3-1 05:54:17] 05:54:17 Parameters OK 05:54:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:18 Set A/D data flow result=40 05:54:18 Set A/D channel type result=40 05:54:18 Set A/D encoding result=40 05:54:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:18 Set channel filter=0.000000e+000 result=40 05:54:18 Config A/D Result=40 05:54:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:18 Get A/D filter: -9.255963e+061 result=40 05:54:18 Get A/D value=-858993460 result=40 05:54:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:18 Parameters OK 05:54:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:18 Set A/D data flow result=40 05:54:18 Set A/D channel type result=40 05:54:18 Set A/D encoding result=40 05:54:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:18 Set channel filter=0.000000e+000 result=40 05:54:18 Config A/D Result=40 05:54:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:18 Get A/D filter: -9.255963e+061 result=40 05:54:18 Get A/D value=-858993460 result=40 05:54:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:18 Aux= 05:54:18 Message to Camera, serial 41554 queued 05:54:54 Received message from Master: op=PointingHead serial=41567 05:54:54 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:54:54 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:54:55 Point started: ret=0 05:54:55 point_skyscan result=0 05:54:55 Check angles 05:54:55 SkyScan query 05:54:56 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 05:54:56 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 05:54:56 Check angles 05:54:56 SkyScan query 05:54:57 SkyScan query done: ret=0 az=153.66<-10244 ze=-6.495<-12433 Statuses=0009 0008 05:54:57 Msec=750 True Az=153.66 Ze=-6.495 Az status=0009 Ze status=0008 05:54:57 Check angles 05:54:57 SkyScan query 05:54:58 SkyScan query done: ret=0 az=171.495<-11433 ze=-6.495<-12433 Statuses=0009 0008 05:54:58 Msec=1500 True Az=171.495 Ze=-6.495 Az status=0009 Ze status=0008 05:54:58 Check angles 05:54:58 SkyScan query 05:54:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:54:58 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:54:58 Message to Master queued w/err=0: serial=41567 error=0 05:55:03 Received message from Master: op=Filter serial=41568 05:55:03 Color wheel filter change from 0 to 0 05:55:03 FLIGetFilterPos err=0 currentPosition=0 05:55:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:03 Filter is already there-color wheel unchanged 05:55:03 Received message from Master: op=Shutter serial=41569 05:55:03 Shutter LASER close 05:55:03 Received message from Camera: op=State serial=41571 05:55:03 GetSingleValue result=40 Value=cccccccc 05:55:03 SkyScan query 05:55:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:55:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:04 Parameters OK 05:55:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:04 Set A/D data flow result=40 05:55:04 Set A/D channel type result=40 05:55:04 Set A/D encoding result=40 05:55:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:04 Set channel filter=0.000000e+000 result=40 05:55:04 Config A/D Result=40 05:55:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:04 Get A/D filter: -9.255963e+061 result=40 05:55:04 Get A/D value=-858993460 result=40 05:55:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:04 Parameters OK 05:55:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:04 Set A/D data flow result=40 05:55:04 Set A/D channel type result=40 05:55:04 Set A/D encoding result=40 05:55:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:04 Set channel filter=0.000000e+000 result=40 05:55:04 Config A/D Result=40 05:55:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:04 Get A/D filter: -9.255963e+061 result=40 05:55:04 Get A/D value=-858993460 result=40 05:55:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:04 Aux= 05:55:04 Message to Camera, serial 41571 queued 05:55:41 Received message from Master: op=PointingHead serial=41584 05:55:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:55:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:55:41 Point started: ret=0 05:55:41 point_skyscan result=0 05:55:42 Check angles 05:55:42 SkyScan query 05:55:43 SkyScan query done: ret=0 az=153.03<-10202 ze=6.51<-11566 Statuses=0009 0008 05:55:43 Msec=0 True Az=153.03 Ze=6.51 Az status=0009 Ze status=0008 05:55:43 Check angles 05:55:43 SkyScan query 05:55:43 SkyScan query done: ret=0 az=135.51<-9034 ze=6.495<-11567 Statuses=0009 0008 05:55:43 Msec=750 True Az=135.51 Ze=6.495 Az status=0009 Ze status=0008 05:55:43 Check angles 05:55:43 SkyScan query 05:55:44 SkyScan query done: ret=0 az=117.975<-7865 ze=6.495<-11567 Statuses=0009 0008 05:55:44 Msec=1500 True Az=117.975 Ze=6.495 Az status=0009 Ze status=0008 05:55:44 Check angles 05:55:44 SkyScan query 05:55:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:55:45 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:55:45 Message to Master queued w/err=0: serial=41584 error=0 05:55:50 Received message from Master: op=Filter serial=41585 05:55:50 Color wheel filter change from 0 to 0 05:55:50 FLIGetFilterPos err=0 currentPosition=0 05:55:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:50 Filter is already there-color wheel unchanged 05:55:50 Received message from Master: op=Shutter serial=41586 05:55:50 Shutter LASER close 05:55:50 Received message from Camera: op=State serial=41588 05:55:50 GetSingleValue result=40 Value=cccccccc 05:55:50 SkyScan query 05:55:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:55:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:51 Parameters OK 05:55:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:51 Set A/D data flow result=40 05:55:51 Set A/D channel type result=40 05:55:51 Set A/D encoding result=40 05:55:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:51 Set channel filter=0.000000e+000 result=40 05:55:51 Config A/D Result=40 05:55:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:51 Get A/D filter: -9.255963e+061 result=40 05:55:51 Get A/D value=-858993460 result=40 05:55:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:51 Parameters OK 05:55:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:51 Set A/D data flow result=40 05:55:51 Set A/D channel type result=40 05:55:51 Set A/D encoding result=40 05:55:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:51 Set channel filter=0.000000e+000 result=40 05:55:51 Config A/D Result=40 05:55:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:51 Get A/D filter: -9.255963e+061 result=40 05:55:51 Get A/D value=-858993460 result=40 05:55:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:51 Aux= 05:55:51 Message to Camera, serial 41588 queued 05:56:28 Received message from Master: op=PointingHead serial=41601 05:56:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:56:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:56:28 Point started: ret=0 05:56:28 point_skyscan result=0 05:56:29 Check angles 05:56:29 SkyScan query 05:56:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 05:56:29 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 05:56:29 Check angles 05:56:29 SkyScan query 05:56:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 05:56:30 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 05:56:30 Check angles 05:56:30 SkyScan query 05:56:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.935<-16329 Statuses=0008 0009 05:56:31 Msec=1500 True Az=112.995 Ze=-64.935 Az status=0008 Ze status=0009 05:56:31 Check angles 05:56:31 SkyScan query 05:56:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.905<-17727 Statuses=0008 0009 05:56:31 Msec=2250 True Az=112.995 Ze=-85.905 Az status=0008 Ze status=0009 05:56:32 Check angles 05:56:32 SkyScan query 05:56:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.845<-19123 Statuses=0008 0009 05:56:32 Msec=3000 True Az=112.995 Ze=-106.845 Az status=0008 Ze status=0009 05:56:32 Check angles 05:56:32 SkyScan query 05:56:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.815<-20521 Statuses=0008 0009 05:56:33 Msec=3750 True Az=112.995 Ze=-127.815 Az status=0008 Ze status=0009 05:56:33 Check angles 05:56:33 SkyScan query 05:56:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.755<-21917 Statuses=0008 0009 05:56:34 Msec=4500 True Az=112.995 Ze=-148.755 Az status=0008 Ze status=0009 05:56:34 Check angles 05:56:34 SkyScan query 05:56:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.695<-23313 Statuses=0008 0009 05:56:34 Msec=5250 True Az=112.995 Ze=-169.695 Az status=0008 Ze status=0009 05:56:35 Check angles 05:56:35 SkyScan query 05:56:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:56:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:56:35 Message to Master queued w/err=0: serial=41601 error=0 05:56:40 Received message from Master: op=Filter serial=41602 05:56:40 Color wheel filter change from 0 to 0 05:56:40 FLIGetFilterPos err=0 currentPosition=0 05:56:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:40 Filter is already there-color wheel unchanged 05:56:40 Received message from Master: op=Shutter serial=41603 05:56:40 Shutter LASER open 05:56:41 Received message from Camera: op=State serial=41605 05:56:41 GetSingleValue result=40 Value=cccccccc 05:56:41 SkyScan query 05:56:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:56:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:41 Parameters OK 05:56:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:41 Set A/D data flow result=40 05:56:41 Set A/D channel type result=40 05:56:41 Set A/D encoding result=40 05:56:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:41 Set channel filter=0.000000e+000 result=40 05:56:41 Config A/D Result=40 05:56:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:41 Get A/D filter: -9.255963e+061 result=40 05:56:41 Get A/D value=-858993460 result=40 05:56:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:41 Parameters OK 05:56:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:41 Set A/D data flow result=40 05:56:41 Set A/D channel type result=40 05:56:41 Set A/D encoding result=40 05:56:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:41 Set channel filter=0.000000e+000 result=40 05:56:41 Config A/D Result=40 05:56:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:41 Get A/D filter: -9.255963e+061 result=40 05:56:41 Get A/D value=-858993460 result=40 05:56:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:41 Aux= 05:56:41 Message to Camera, serial 41605 queued 05:56:50 Received message from Master: op=Shutter serial=41615 05:56:50 Shutter LASER close 05:56:50 Received message from Master: op=PointingHead serial=41619 05:56:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:56:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:56:50 Point started: ret=0 05:56:50 point_skyscan result=0 05:56:51 Check angles 05:56:51 SkyScan query 05:56:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 05:56:52 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 05:56:52 Check angles 05:56:52 SkyScan query 05:56:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.22<-20148 Statuses=0008 0009 05:56:52 Msec=750 True Az=112.995 Ze=-122.22 Az status=0008 Ze status=0009 05:56:53 Check angles 05:56:53 SkyScan query 05:56:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 05:56:53 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 05:56:53 Check angles 05:56:53 SkyScan query 05:56:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.89<-17326 Statuses=0008 0009 05:56:54 Msec=2250 True Az=112.995 Ze=-79.89 Az status=0008 Ze status=0009 05:56:54 Check angles 05:56:54 SkyScan query 05:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.95<-15930 Statuses=0008 0009 05:56:55 Msec=3000 True Az=112.995 Ze=-58.95 Az status=0008 Ze status=0009 05:56:55 Check angles 05:56:55 SkyScan query 05:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 05:56:55 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 05:56:56 Check angles 05:56:56 SkyScan query 05:56:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.995<-13133 Statuses=0008 0009 05:56:56 Msec=4500 True Az=112.995 Ze=-16.995 Az status=0008 Ze status=0009 05:56:56 Check angles 05:56:56 SkyScan query 05:56:57 SkyScan query done: ret=0 az=112.995<-7533 ze=3.945<-11737 Statuses=0008 0009 05:56:57 Msec=5250 True Az=112.995 Ze=3.945 Az status=0008 Ze status=0009 05:56:57 Check angles 05:56:57 SkyScan query 05:56:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:56:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:56:58 Message to Master queued w/err=0: serial=41619 error=0 05:57:03 Received message from Master: op=Filter serial=41620 05:57:03 Color wheel filter change from 0 to 0 05:57:03 FLIGetFilterPos err=0 currentPosition=0 05:57:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:03 Filter is already there-color wheel unchanged 05:57:03 Received message from Master: op=Shutter serial=41621 05:57:03 Shutter LASER close 05:57:03 Received message from Camera: op=State serial=41623 05:57:03 GetSingleValue result=40 Value=cccccccc 05:57:03 SkyScan query 05:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:57:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:04 Parameters OK 05:57:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:04 Set A/D data flow result=40 05:57:04 Set A/D channel type result=40 05:57:04 Set A/D encoding result=40 05:57:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:04 Set channel filter=0.000000e+000 result=40 05:57:04 Config A/D Result=40 05:57:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:04 Get A/D filter: -9.255963e+061 result=40 05:57:04 Get A/D value=-858993460 result=40 05:57:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:04 Parameters OK 05:57:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:04 Set A/D data flow result=40 05:57:04 Set A/D channel type result=40 05:57:04 Set A/D encoding result=40 05:57:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:04 Set channel filter=0.000000e+000 result=40 05:57:04 Config A/D Result=40 05:57:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:04 Get A/D filter: -9.255963e+061 result=40 05:57:04 Get A/D value=-858993460 result=40 05:57:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:04 Aux= 05:57:04 Message to Camera, serial 41623 queued 05:57:40 Received message from Master: op=PointingHead serial=41636 05:57:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:57:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:57:41 Point started: ret=0 05:57:41 point_skyscan result=0 05:57:42 Check angles 05:57:42 SkyScan query 05:57:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:57:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:57:42 Message to Master queued w/err=0: serial=41636 error=0 05:57:47 Received message from Master: op=Filter serial=41637 05:57:47 Color wheel filter change from 0 to 0 05:57:47 FLIGetFilterPos err=0 currentPosition=0 05:57:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:47 Filter is already there-color wheel unchanged 05:57:47 Received message from Master: op=Shutter serial=41638 05:57:47 Shutter LASER close 05:57:47 Received message from Camera: op=State serial=41640 05:57:47 GetSingleValue result=40 Value=cccccccc 05:57:47 SkyScan query 05:57:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:57:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:48 Parameters OK 05:57:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:48 Set A/D data flow result=40 05:57:48 Set A/D channel type result=40 05:57:48 Set A/D encoding result=40 05:57:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:48 Set channel filter=0.000000e+000 result=40 05:57:48 Config A/D Result=40 05:57:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:48 Get A/D filter: -9.255963e+061 result=40 05:57:48 Get A/D value=-858993460 result=40 05:57:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:48 Parameters OK 05:57:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:48 Set A/D data flow result=40 05:57:48 Set A/D channel type result=40 05:57:48 Set A/D encoding result=40 05:57:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:48 Set channel filter=0.000000e+000 result=40 05:57:48 Config A/D Result=40 05:57:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:48 Get A/D filter: -9.255963e+061 result=40 05:57:48 Get A/D value=-858993460 result=40 05:57:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:48 Aux= 05:57:48 Message to Camera, serial 41640 queued 05:58:25 Received message from Master: op=PointingHead serial=41653 05:58:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:58:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:58:25 Point started: ret=0 05:58:25 point_skyscan result=0 05:58:26 Check angles 05:58:26 SkyScan query 05:58:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:58:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:58:26 Message to Master queued w/err=0: serial=41653 error=0 05:58:31 Received message from Master: op=Filter serial=41654 05:58:31 Color wheel filter change from 0 to 0 05:58:31 FLIGetFilterPos err=0 currentPosition=0 05:58:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:31 Filter is already there-color wheel unchanged 05:58:32 Received message from Master: op=Shutter serial=41655 05:58:32 Shutter LASER close 05:58:32 Received message from Camera: op=State serial=41657 05:58:32 GetSingleValue result=40 Value=cccccccc 05:58:32 SkyScan query 05:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:58:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:32 Parameters OK 05:58:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:32 Set A/D data flow result=40 05:58:32 Set A/D channel type result=40 05:58:32 Set A/D encoding result=40 05:58:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:32 Set channel filter=0.000000e+000 result=40 05:58:32 Config A/D Result=40 05:58:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:32 Get A/D filter: -9.255963e+061 result=40 05:58:32 Get A/D value=-858993460 result=40 05:58:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:32 Parameters OK 05:58:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:32 Set A/D data flow result=40 05:58:32 Set A/D channel type result=40 05:58:32 Set A/D encoding result=40 05:58:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:32 Set channel filter=0.000000e+000 result=40 05:58:32 Config A/D Result=40 05:58:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:32 Get A/D filter: -9.255963e+061 result=40 05:58:32 Get A/D value=-858993460 result=40 05:58:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:32 Aux= 05:58:32 Message to Camera, serial 41657 queued 05:59:09 Received message from Master: op=PointingHead serial=41670 05:59:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:59:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:59:09 Point started: ret=0 05:59:09 point_skyscan result=0 05:59:10 Check angles 05:59:10 SkyScan query 05:59:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:59:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:59:11 Message to Master queued w/err=0: serial=41670 error=0 05:59:16 Received message from Master: op=Filter serial=41671 05:59:16 Color wheel filter change from 0 to 0 05:59:16 FLIGetFilterPos err=0 currentPosition=0 05:59:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:16 Filter is already there-color wheel unchanged 05:59:16 Received message from Master: op=Shutter serial=41672 05:59:16 Shutter LASER close 05:59:16 Received message from Camera: op=State serial=41674 05:59:16 GetSingleValue result=40 Value=cccccccc 05:59:16 SkyScan query 05:59:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:59:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:16 Parameters OK 05:59:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:16 Set A/D data flow result=40 05:59:16 Set A/D channel type result=40 05:59:16 Set A/D encoding result=40 05:59:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:16 Set channel filter=0.000000e+000 result=40 05:59:16 Config A/D Result=40 05:59:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:16 Get A/D filter: -9.255963e+061 result=40 05:59:16 Get A/D value=-858993460 result=40 05:59:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:16 Parameters OK 05:59:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:16 Set A/D data flow result=40 05:59:16 Set A/D channel type result=40 05:59:16 Set A/D encoding result=40 05:59:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:16 Set channel filter=0.000000e+000 result=40 05:59:16 Config A/D Result=40 05:59:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:16 Get A/D filter: -9.255963e+061 result=40 05:59:16 Get A/D value=-858993460 result=40 05:59:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:16 Aux= 05:59:16 Message to Camera, serial 41674 queued 05:59:53 Received message from Master: op=PointingHead serial=41687 05:59:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:59:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:59:54 Point started: ret=0 05:59:54 point_skyscan result=0 05:59:54 Check angles 05:59:54 SkyScan query 05:59:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 05:59:55 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 05:59:55 Check angles 05:59:55 SkyScan query 05:59:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.835<-14989 Statuses=0008 0009 05:59:56 Msec=750 True Az=112.995 Ze=-44.835 Az status=0008 Ze status=0009 05:59:56 Check angles 05:59:56 SkyScan query 05:59:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.21<-16414 Statuses=0008 0009 05:59:56 Msec=1500 True Az=112.995 Ze=-66.21 Az status=0008 Ze status=0009 05:59:57 Check angles 05:59:57 SkyScan query 05:59:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.165<-17811 Statuses=0008 0009 05:59:57 Msec=2250 True Az=112.995 Ze=-87.165 Az status=0008 Ze status=0009 05:59:57 Check angles 05:59:57 SkyScan query 05:59:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.105<-19207 Statuses=0008 0009 05:59:58 Msec=3000 True Az=112.995 Ze=-108.105 Az status=0008 Ze status=0009 05:59:58 Check angles 05:59:58 SkyScan query 05:59:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.06<-20604 Statuses=0008 0009 05:59:59 Msec=3750 True Az=112.995 Ze=-129.06 Az status=0008 Ze status=0009 05:59:59 Check angles 05:59:59 SkyScan query 05:59:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.015<-22001 Statuses=0008 0009 05:59:59 Msec=4500 True Az=112.995 Ze=-150.015 Az status=0008 Ze status=0009 06:00:00 Check angles 06:00:00 SkyScan query 06:00:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0008 0009 06:00:00 Msec=5250 True Az=112.995 Ze=-170.865 Az status=0008 Ze status=0009 06:00:00 Check angles 06:00:00 SkyScan query 06:00:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:00:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:00:01 Message to Master queued w/err=0: serial=41687 error=0 06:00:06 Received message from Master: op=Filter serial=41688 06:00:06 Color wheel filter change from 0 to 0 06:00:06 FLIGetFilterPos err=0 currentPosition=0 06:00:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:06 Filter is already there-color wheel unchanged 06:00:06 Received message from Master: op=Shutter serial=41689 06:00:06 Shutter LASER open 06:00:06 Received message from Camera: op=State serial=41691 06:00:06 GetSingleValue result=40 Value=cccccccc 06:00:06 SkyScan query 06:00:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:00:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:07 Parameters OK 06:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:07 Set A/D data flow result=40 06:00:07 Set A/D channel type result=40 06:00:07 Set A/D encoding result=40 06:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:07 Set channel filter=0.000000e+000 result=40 06:00:07 Config A/D Result=40 06:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:07 Get A/D filter: -9.255963e+061 result=40 06:00:07 Get A/D value=-858993460 result=40 06:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:07 Parameters OK 06:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:07 Set A/D data flow result=40 06:00:07 Set A/D channel type result=40 06:00:07 Set A/D encoding result=40 06:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:07 Set channel filter=0.000000e+000 result=40 06:00:07 Config A/D Result=40 06:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:07 Get A/D filter: -9.255963e+061 result=40 06:00:07 Get A/D value=-858993460 result=40 06:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:07 Aux= 06:00:07 Message to Camera, serial 41691 queued 06:00:15 Received message from Master: op=Shutter serial=41701 06:00:15 Shutter LASER close 06:00:16 Received message from Master: op=PointingHead serial=41705 06:00:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:00:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:00:16 Point started: ret=0 06:00:16 point_skyscan result=0 06:00:17 Check angles 06:00:17 SkyScan query 06:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.86<-21524 Statuses=0008 0009 06:00:18 Msec=0 True Az=112.995 Ze=-142.86 Az status=0008 Ze status=0009 06:00:18 Check angles 06:00:18 SkyScan query 06:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 06:00:18 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 06:00:19 Check angles 06:00:19 SkyScan query 06:00:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 06:00:19 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 06:00:19 Check angles 06:00:19 SkyScan query 06:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.01<-17334 Statuses=0008 0009 06:00:20 Msec=2250 True Az=112.995 Ze=-80.01 Az status=0008 Ze status=0009 06:00:20 Check angles 06:00:20 SkyScan query 06:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.07<-15938 Statuses=0008 0009 06:00:21 Msec=3000 True Az=112.995 Ze=-59.07 Az status=0008 Ze status=0009 06:00:21 Check angles 06:00:21 SkyScan query 06:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.085<-14539 Statuses=0008 0009 06:00:21 Msec=3750 True Az=112.995 Ze=-38.085 Az status=0008 Ze status=0009 06:00:22 Check angles 06:00:22 SkyScan query 06:00:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.13<-13142 Statuses=0008 0009 06:00:22 Msec=4500 True Az=112.995 Ze=-17.13 Az status=0008 Ze status=0009 06:00:22 Check angles 06:00:22 SkyScan query 06:00:23 SkyScan query done: ret=0 az=112.995<-7533 ze=3.825<-11745 Statuses=0008 0009 06:00:23 Msec=5250 True Az=112.995 Ze=3.825 Az status=0008 Ze status=0009 06:00:23 Check angles 06:00:23 SkyScan query 06:00:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:00:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:00:24 Message to Master queued w/err=0: serial=41705 error=0 06:00:29 Received message from Master: op=Filter serial=41706 06:00:29 Color wheel filter change from 0 to 0 06:00:29 FLIGetFilterPos err=0 currentPosition=0 06:00:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:29 Filter is already there-color wheel unchanged 06:00:29 Received message from Master: op=Shutter serial=41707 06:00:29 Shutter LASER close 06:00:29 Received message from Camera: op=State serial=41709 06:00:29 GetSingleValue result=40 Value=cccccccc 06:00:29 SkyScan query 06:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:00:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:30 Parameters OK 06:00:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:30 Set A/D data flow result=40 06:00:30 Set A/D channel type result=40 06:00:30 Set A/D encoding result=40 06:00:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:30 Set channel filter=0.000000e+000 result=40 06:00:30 Config A/D Result=40 06:00:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:30 Get A/D filter: -9.255963e+061 result=40 06:00:30 Get A/D value=-858993460 result=40 06:00:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:30 Parameters OK 06:00:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:30 Set A/D data flow result=40 06:00:30 Set A/D channel type result=40 06:00:30 Set A/D encoding result=40 06:00:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:30 Set channel filter=0.000000e+000 result=40 06:00:30 Config A/D Result=40 06:00:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:30 Get A/D filter: -9.255963e+061 result=40 06:00:30 Get A/D value=-858993460 result=40 06:00:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:30 Aux= 06:00:30 Message to Camera, serial 41709 queued 06:01:05 Received message from Master: op=PointingHead serial=41721 06:01:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:01:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:01:06 Point started: ret=0 06:01:06 point_skyscan result=0 06:01:07 Check angles 06:01:07 SkyScan query 06:01:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:01:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:01:07 Message to Master queued w/err=0: serial=41721 error=0 06:01:12 Received message from Master: op=Filter serial=41722 06:01:12 Color wheel filter change from 0 to 0 06:01:12 FLIGetFilterPos err=0 currentPosition=0 06:01:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:12 Filter is already there-color wheel unchanged 06:01:12 Received message from Master: op=Shutter serial=41723 06:01:12 Shutter LASER close 06:01:12 Received message from Camera: op=State serial=41725 06:01:12 GetSingleValue result=40 Value=cccccccc 06:01:12 SkyScan query 06:01:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:01:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:13 Parameters OK 06:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:13 Set A/D data flow result=40 06:01:13 Set A/D channel type result=40 06:01:13 Set A/D encoding result=40 06:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:13 Set channel filter=0.000000e+000 result=40 06:01:13 Config A/D Result=40 06:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:13 Get A/D filter: -9.255963e+061 result=40 06:01:13 Get A/D value=-858993460 result=40 06:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:13 Parameters OK 06:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:13 Set A/D data flow result=40 06:01:13 Set A/D channel type result=40 06:01:13 Set A/D encoding result=40 06:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:13 Set channel filter=0.000000e+000 result=40 06:01:13 Config A/D Result=40 06:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:13 Get A/D filter: -9.255963e+061 result=40 06:01:13 Get A/D value=-858993460 result=40 06:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:13 Aux= 06:01:13 Message to Camera, serial 41725 queued 06:01:50 Received message from Master: op=PointingHead serial=41738 06:01:50 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:01:50 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:01:50 Point started: ret=0 06:01:50 point_skyscan result=0 06:01:51 Check angles 06:01:51 SkyScan query 06:01:51 SkyScan query done: ret=0 az=135.72<-9048 ze=-6.51<-12434 Statuses=0009 0008 06:01:51 Msec=0 True Az=135.72 Ze=-6.51 Az status=0009 Ze status=0008 06:01:52 Check angles 06:01:52 SkyScan query 06:01:52 SkyScan query done: ret=0 az=153.225<-10215 ze=-6.495<-12433 Statuses=0009 0008 06:01:52 Msec=750 True Az=153.225 Ze=-6.495 Az status=0009 Ze status=0008 06:01:52 Check angles 06:01:52 SkyScan query 06:01:53 SkyScan query done: ret=0 az=170.715<-11381 ze=-6.495<-12433 Statuses=0009 0008 06:01:53 Msec=1500 True Az=170.715 Ze=-6.495 Az status=0009 Ze status=0008 06:01:53 Check angles 06:01:53 SkyScan query 06:01:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:01:54 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:01:54 Message to Master queued w/err=0: serial=41738 error=0 06:01:59 Received message from Master: op=Filter serial=41739 06:01:59 Color wheel filter change from 0 to 0 06:01:59 FLIGetFilterPos err=0 currentPosition=0 06:01:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:59 Filter is already there-color wheel unchanged 06:01:59 Received message from Master: op=Shutter serial=41740 06:01:59 Shutter LASER close 06:01:59 Received message from Camera: op=State serial=41742 06:01:59 GetSingleValue result=40 Value=cccccccc 06:01:59 SkyScan query 06:01:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:01:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:59 Parameters OK 06:01:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:59 Set A/D data flow result=40 06:01:59 Set A/D channel type result=40 06:01:59 Set A/D encoding result=40 06:01:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:59 Set channel filter=0.000000e+000 result=40 06:01:59 Config A/D Result=40 06:01:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:59 Get A/D filter: -9.255963e+061 result=40 06:01:59 Get A/D value=-858993460 result=40 06:01:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:59 Parameters OK 06:01:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:59 Set A/D data flow result=40 06:01:59 Set A/D channel type result=40 06:01:59 Set A/D encoding result=40 06:01:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:59 Set channel filter=0.000000e+000 result=40 06:01:59 Config A/D Result=40 06:01:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:59 Get A/D filter: -9.255963e+061 result=40 06:01:59 Get A/D value=-858993460 result=40 06:01:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:59 Aux= 06:01:59 Message to Camera, serial 41742 queued 06:02:36 Received message from Master: op=PointingHead serial=41755 06:02:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:02:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:02:37 Point started: ret=0 06:02:37 point_skyscan result=0 06:02:37 Check angles 06:02:37 SkyScan query 06:02:38 SkyScan query done: ret=0 az=153.18<-10212 ze=6.51<-11566 Statuses=0009 0008 06:02:38 Msec=0 True Az=153.18 Ze=6.51 Az status=0009 Ze status=0008 06:02:38 Check angles 06:02:38 SkyScan query 06:02:39 SkyScan query done: ret=0 az=135.72<-9048 ze=6.495<-11567 Statuses=0009 0008 06:02:39 Msec=750 True Az=135.72 Ze=6.495 Az status=0009 Ze status=0008 06:02:39 Check angles 06:02:39 SkyScan query 06:02:39 SkyScan query done: ret=0 az=118.245<-7883 ze=6.495<-11567 Statuses=0009 0008 06:02:39 Msec=1500 True Az=118.245 Ze=6.495 Az status=0009 Ze status=0008 06:02:40 Check angles 06:02:40 SkyScan query 06:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:02:40 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:02:40 Message to Master queued w/err=0: serial=41755 error=0 06:02:45 Received message from Master: op=Filter serial=41756 06:02:45 Color wheel filter change from 0 to 0 06:02:45 FLIGetFilterPos err=0 currentPosition=0 06:02:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:45 Filter is already there-color wheel unchanged 06:02:45 Received message from Master: op=Shutter serial=41757 06:02:45 Shutter LASER close 06:02:45 Received message from Camera: op=State serial=41759 06:02:45 GetSingleValue result=40 Value=cccccccc 06:02:45 SkyScan query 06:02:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:02:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:46 Parameters OK 06:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:46 Set A/D data flow result=40 06:02:46 Set A/D channel type result=40 06:02:46 Set A/D encoding result=40 06:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:46 Set channel filter=0.000000e+000 result=40 06:02:46 Config A/D Result=40 06:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:46 Get A/D filter: -9.255963e+061 result=40 06:02:46 Get A/D value=-858993460 result=40 06:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:46 Parameters OK 06:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:46 Set A/D data flow result=40 06:02:46 Set A/D channel type result=40 06:02:46 Set A/D encoding result=40 06:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:46 Set channel filter=0.000000e+000 result=40 06:02:46 Config A/D Result=40 06:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:46 Get A/D filter: -9.255963e+061 result=40 06:02:46 Get A/D value=-858993460 result=40 06:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:46 Aux= 06:02:46 Message to Camera, serial 41759 queued 06:03:23 Received message from Master: op=PointingHead serial=41772 06:03:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:03:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:03:23 Point started: ret=0 06:03:23 point_skyscan result=0 06:03:24 Check angles 06:03:24 SkyScan query 06:03:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 06:03:24 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 06:03:25 Check angles 06:03:25 SkyScan query 06:03:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.145<-14943 Statuses=0008 0009 06:03:25 Msec=750 True Az=112.995 Ze=-44.145 Az status=0008 Ze status=0009 06:03:25 Check angles 06:03:25 SkyScan query 06:03:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.52<-16368 Statuses=0008 0009 06:03:26 Msec=1500 True Az=112.995 Ze=-65.52 Az status=0008 Ze status=0009 06:03:26 Check angles 06:03:26 SkyScan query 06:03:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 06:03:27 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 06:03:27 Check angles 06:03:27 SkyScan query 06:03:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.43<-19162 Statuses=0008 0009 06:03:28 Msec=3000 True Az=112.995 Ze=-107.43 Az status=0008 Ze status=0009 06:03:28 Check angles 06:03:28 SkyScan query 06:03:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.79<-20586 Statuses=0008 0009 06:03:28 Msec=3750 True Az=112.995 Ze=-128.79 Az status=0008 Ze status=0009 06:03:28 Check angles 06:03:28 SkyScan query 06:03:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 06:03:29 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 06:03:29 Check angles 06:03:29 SkyScan query 06:03:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 06:03:30 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 06:03:30 Check angles 06:03:30 SkyScan query 06:03:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:03:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:03:31 Message to Master queued w/err=0: serial=41772 error=0 06:03:36 Received message from Master: op=Filter serial=41773 06:03:36 Color wheel filter change from 0 to 0 06:03:36 FLIGetFilterPos err=0 currentPosition=0 06:03:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:36 Filter is already there-color wheel unchanged 06:03:36 Received message from Master: op=Shutter serial=41774 06:03:36 Shutter LASER open 06:03:36 Received message from Camera: op=State serial=41776 06:03:36 GetSingleValue result=40 Value=cccccccc 06:03:36 SkyScan query 06:03:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:03:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:36 Parameters OK 06:03:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:36 Set A/D data flow result=40 06:03:36 Set A/D channel type result=40 06:03:36 Set A/D encoding result=40 06:03:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:36 Set channel filter=0.000000e+000 result=40 06:03:36 Config A/D Result=40 06:03:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:36 Get A/D filter: -9.255963e+061 result=40 06:03:36 Get A/D value=-858993460 result=40 06:03:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:36 Parameters OK 06:03:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:36 Set A/D data flow result=40 06:03:36 Set A/D channel type result=40 06:03:36 Set A/D encoding result=40 06:03:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:36 Set channel filter=0.000000e+000 result=40 06:03:36 Config A/D Result=40 06:03:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:36 Get A/D filter: -9.255963e+061 result=40 06:03:36 Get A/D value=-858993460 result=40 06:03:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:36 Aux= 06:03:36 Message to Camera, serial 41776 queued 06:03:38 Received message from Master: op=Identify serial=41778 06:03:45 Received message from Master: op=Shutter serial=41789 06:03:45 Shutter LASER close 06:03:45 Received message from Master: op=PointingHead serial=41793 06:03:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:03:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:03:46 Point started: ret=0 06:03:46 point_skyscan result=0 06:03:46 Check angles 06:03:46 SkyScan query 06:03:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 06:03:47 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 06:03:47 Check angles 06:03:47 SkyScan query 06:03:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 06:03:48 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 06:03:48 Check angles 06:03:48 SkyScan query 06:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.8<-18720 Statuses=0008 0009 06:03:49 Msec=1500 True Az=112.995 Ze=-100.8 Az status=0008 Ze status=0009 06:03:49 Check angles 06:03:49 SkyScan query 06:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 06:03:49 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 06:03:49 Check angles 06:03:49 SkyScan query 06:03:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.44<-15896 Statuses=0008 0009 06:03:50 Msec=3000 True Az=112.995 Ze=-58.44 Az status=0008 Ze status=0009 [UTC 2019-3-1 06:03:50] 06:03:50 Check angles 06:03:50 SkyScan query 06:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.5<-14500 Statuses=0008 0009 06:03:51 Msec=3750 True Az=112.995 Ze=-37.5 Az status=0008 Ze status=0009 06:03:51 Check angles 06:03:51 SkyScan query 06:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.53<-13102 Statuses=0008 0009 06:03:52 Msec=4500 True Az=112.995 Ze=-16.53 Az status=0008 Ze status=0009 06:03:52 Check angles 06:03:52 SkyScan query 06:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=4.68<-11688 Statuses=0008 0009 06:03:52 Msec=5250 True Az=112.995 Ze=4.68 Az status=0008 Ze status=0009 06:03:52 Check angles 06:03:52 SkyScan query 06:03:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:03:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:03:53 Message to Master queued w/err=0: serial=41793 error=0 06:03:58 Received message from Master: op=Filter serial=41794 06:03:58 Color wheel filter change from 0 to 0 06:03:58 FLIGetFilterPos err=0 currentPosition=0 06:03:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:58 Filter is already there-color wheel unchanged 06:03:58 Received message from Master: op=Shutter serial=41795 06:03:58 Shutter LASER close 06:03:58 Received message from Camera: op=State serial=41797 06:03:58 GetSingleValue result=40 Value=cccccccc 06:03:58 SkyScan query 06:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:03:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:59 Parameters OK 06:03:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:59 Set A/D data flow result=40 06:03:59 Set A/D channel type result=40 06:03:59 Set A/D encoding result=40 06:03:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:59 Set channel filter=0.000000e+000 result=40 06:03:59 Config A/D Result=40 06:03:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:59 Get A/D filter: -9.255963e+061 result=40 06:03:59 Get A/D value=-858993460 result=40 06:03:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:59 Parameters OK 06:03:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:59 Set A/D data flow result=40 06:03:59 Set A/D channel type result=40 06:03:59 Set A/D encoding result=40 06:03:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:59 Set channel filter=0.000000e+000 result=40 06:03:59 Config A/D Result=40 06:03:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:59 Get A/D filter: -9.255963e+061 result=40 06:03:59 Get A/D value=-858993460 result=40 06:03:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:59 Aux= 06:03:59 Message to Camera, serial 41797 queued 06:04:35 Received message from Master: op=PointingHead serial=41809 06:04:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:04:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:04:35 Point started: ret=0 06:04:35 point_skyscan result=0 06:04:36 Check angles 06:04:36 SkyScan query 06:04:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:04:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:04:37 Message to Master queued w/err=0: serial=41809 error=0 06:04:42 Received message from Master: op=Filter serial=41810 06:04:42 Color wheel filter change from 0 to 0 06:04:42 FLIGetFilterPos err=0 currentPosition=0 06:04:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:42 Filter is already there-color wheel unchanged 06:04:42 Received message from Master: op=Shutter serial=41811 06:04:42 Shutter LASER close 06:04:42 Received message from Camera: op=State serial=41813 06:04:42 GetSingleValue result=40 Value=cccccccc 06:04:42 SkyScan query 06:04:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:04:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:42 Parameters OK 06:04:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:42 Set A/D data flow result=40 06:04:42 Set A/D channel type result=40 06:04:42 Set A/D encoding result=40 06:04:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:42 Set channel filter=0.000000e+000 result=40 06:04:42 Config A/D Result=40 06:04:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:42 Get A/D filter: -9.255963e+061 result=40 06:04:42 Get A/D value=-858993460 result=40 06:04:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:42 Parameters OK 06:04:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:42 Set A/D data flow result=40 06:04:42 Set A/D channel type result=40 06:04:42 Set A/D encoding result=40 06:04:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:42 Set channel filter=0.000000e+000 result=40 06:04:42 Config A/D Result=40 06:04:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:42 Get A/D filter: -9.255963e+061 result=40 06:04:42 Get A/D value=-858993460 result=40 06:04:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:42 Aux= 06:04:42 Message to Camera, serial 41813 queued 06:05:19 Received message from Master: op=PointingHead serial=41826 06:05:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:05:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:05:19 Point started: ret=0 06:05:19 point_skyscan result=0 06:05:20 Check angles 06:05:20 SkyScan query 06:05:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:05:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:05:21 Message to Master queued w/err=0: serial=41826 error=0 06:05:26 Received message from Master: op=Filter serial=41827 06:05:26 Color wheel filter change from 0 to 0 06:05:26 FLIGetFilterPos err=0 currentPosition=0 06:05:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:26 Filter is already there-color wheel unchanged 06:05:26 Received message from Master: op=Shutter serial=41828 06:05:26 Shutter LASER close 06:05:26 Received message from Camera: op=State serial=41830 06:05:26 GetSingleValue result=40 Value=cccccccc 06:05:26 SkyScan query 06:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:05:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:27 Parameters OK 06:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:27 Set A/D data flow result=40 06:05:27 Set A/D channel type result=40 06:05:27 Set A/D encoding result=40 06:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:27 Set channel filter=0.000000e+000 result=40 06:05:27 Config A/D Result=40 06:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:27 Get A/D filter: -9.255963e+061 result=40 06:05:27 Get A/D value=-858993460 result=40 06:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:27 Parameters OK 06:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:27 Set A/D data flow result=40 06:05:27 Set A/D channel type result=40 06:05:27 Set A/D encoding result=40 06:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:27 Set channel filter=0.000000e+000 result=40 06:05:27 Config A/D Result=40 06:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:27 Get A/D filter: -9.255963e+061 result=40 06:05:27 Get A/D value=-858993460 result=40 06:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:27 Aux= 06:05:27 Message to Camera, serial 41830 queued 06:06:03 Received message from Master: op=PointingHead serial=41842 06:06:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:06:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:06:03 Point started: ret=0 06:06:03 point_skyscan result=0 06:06:04 Check angles 06:06:04 SkyScan query 06:06:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:06:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:06:04 Message to Master queued w/err=0: serial=41842 error=0 06:06:09 Received message from Master: op=Filter serial=41843 06:06:09 Color wheel filter change from 0 to 0 06:06:09 FLIGetFilterPos err=0 currentPosition=0 06:06:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:09 Filter is already there-color wheel unchanged 06:06:09 Received message from Master: op=Shutter serial=41844 06:06:09 Shutter LASER close 06:06:09 Received message from Camera: op=State serial=41846 06:06:09 GetSingleValue result=40 Value=cccccccc 06:06:09 SkyScan query 06:06:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:06:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:10 Parameters OK 06:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:10 Set A/D data flow result=40 06:06:10 Set A/D channel type result=40 06:06:10 Set A/D encoding result=40 06:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:10 Set channel filter=0.000000e+000 result=40 06:06:10 Config A/D Result=40 06:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:10 Get A/D filter: -9.255963e+061 result=40 06:06:10 Get A/D value=-858993460 result=40 06:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:10 Parameters OK 06:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:10 Set A/D data flow result=40 06:06:10 Set A/D channel type result=40 06:06:10 Set A/D encoding result=40 06:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:10 Set channel filter=0.000000e+000 result=40 06:06:10 Config A/D Result=40 06:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:10 Get A/D filter: -9.255963e+061 result=40 06:06:10 Get A/D value=-858993460 result=40 06:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:10 Aux= 06:06:10 Message to Camera, serial 41846 queued 06:06:47 Received message from Master: op=PointingHead serial=41859 06:06:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:06:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:06:47 Point started: ret=0 06:06:47 point_skyscan result=0 06:06:48 Check angles 06:06:48 SkyScan query 06:06:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.61<-13574 Statuses=0008 0009 06:06:49 Msec=0 True Az=112.995 Ze=-23.61 Az status=0008 Ze status=0009 06:06:49 Check angles 06:06:49 SkyScan query 06:06:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 06:06:49 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 06:06:49 Check angles 06:06:49 SkyScan query 06:06:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.955<-16397 Statuses=0008 0009 06:06:50 Msec=1500 True Az=112.995 Ze=-65.955 Az status=0008 Ze status=0009 06:06:50 Check angles 06:06:50 SkyScan query 06:06:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 06:06:51 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 06:06:51 Check angles 06:06:51 SkyScan query 06:06:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 06:06:52 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 06:06:52 Check angles 06:06:52 SkyScan query 06:06:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.805<-20587 Statuses=0008 0009 06:06:52 Msec=3750 True Az=112.995 Ze=-128.805 Az status=0008 Ze status=0009 06:06:52 Check angles 06:06:52 SkyScan query 06:06:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 06:06:53 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 06:06:53 Check angles 06:06:53 SkyScan query 06:06:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.67<-23378 Statuses=0008 0009 06:06:54 Msec=5250 True Az=112.995 Ze=-170.67 Az status=0008 Ze status=0009 06:06:54 Check angles 06:06:54 SkyScan query 06:06:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:06:55 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:06:55 Message to Master queued w/err=0: serial=41859 error=0 06:07:00 Received message from Master: op=Filter serial=41860 06:07:00 Color wheel filter change from 0 to 0 06:07:00 FLIGetFilterPos err=0 currentPosition=0 06:07:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:00 Filter is already there-color wheel unchanged 06:07:00 Received message from Master: op=Shutter serial=41861 06:07:00 Shutter LASER open 06:07:00 Received message from Camera: op=State serial=41863 06:07:00 GetSingleValue result=40 Value=cccccccc 06:07:00 SkyScan query 06:07:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:07:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:00 Parameters OK 06:07:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:00 Set A/D data flow result=40 06:07:00 Set A/D channel type result=40 06:07:00 Set A/D encoding result=40 06:07:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:00 Set channel filter=0.000000e+000 result=40 06:07:00 Config A/D Result=40 06:07:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:00 Get A/D filter: -9.255963e+061 result=40 06:07:00 Get A/D value=-858993460 result=40 06:07:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:00 Parameters OK 06:07:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:00 Set A/D data flow result=40 06:07:00 Set A/D channel type result=40 06:07:00 Set A/D encoding result=40 06:07:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:00 Set channel filter=0.000000e+000 result=40 06:07:00 Config A/D Result=40 06:07:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:00 Get A/D filter: -9.255963e+061 result=40 06:07:00 Get A/D value=-858993460 result=40 06:07:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:00 Aux= 06:07:00 Message to Camera, serial 41863 queued 06:07:09 Received message from Master: op=Shutter serial=41873 06:07:09 Shutter LASER close 06:07:10 Received message from Master: op=PointingHead serial=41877 06:07:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:07:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:07:10 Point started: ret=0 06:07:10 point_skyscan result=0 06:07:11 Check angles 06:07:11 SkyScan query 06:07:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 06:07:11 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 06:07:11 Check angles 06:07:11 SkyScan query 06:07:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 06:07:12 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 06:07:12 Check angles 06:07:12 SkyScan query 06:07:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 06:07:13 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 06:07:13 Check angles 06:07:13 SkyScan query 06:07:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 06:07:13 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 06:07:14 Check angles 06:07:14 SkyScan query 06:07:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 06:07:14 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 06:07:14 Check angles 06:07:14 SkyScan query 06:07:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.95<-14530 Statuses=0008 0009 06:07:15 Msec=3750 True Az=112.995 Ze=-37.95 Az status=0008 Ze status=0009 06:07:15 Check angles 06:07:15 SkyScan query 06:07:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.995<-13133 Statuses=0008 0009 06:07:16 Msec=4500 True Az=112.995 Ze=-16.995 Az status=0008 Ze status=0009 06:07:16 Check angles 06:07:16 SkyScan query 06:07:16 SkyScan query done: ret=0 az=112.995<-7533 ze=3.96<-11736 Statuses=0008 0009 06:07:16 Msec=5250 True Az=112.995 Ze=3.96 Az status=0008 Ze status=0009 06:07:17 Check angles 06:07:17 SkyScan query 06:07:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:07:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:07:17 Message to Master queued w/err=0: serial=41877 error=0 06:07:22 Received message from Master: op=Filter serial=41878 06:07:22 Color wheel filter change from 0 to 0 06:07:22 FLIGetFilterPos err=0 currentPosition=0 06:07:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:22 Filter is already there-color wheel unchanged 06:07:22 Received message from Master: op=Shutter serial=41879 06:07:22 Shutter LASER close 06:07:23 Received message from Camera: op=State serial=41881 06:07:23 GetSingleValue result=40 Value=cccccccc 06:07:23 SkyScan query 06:07:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:07:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:23 Parameters OK 06:07:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:23 Set A/D data flow result=40 06:07:23 Set A/D channel type result=40 06:07:23 Set A/D encoding result=40 06:07:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:23 Set channel filter=0.000000e+000 result=40 06:07:23 Config A/D Result=40 06:07:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:23 Get A/D filter: -9.255963e+061 result=40 06:07:23 Get A/D value=-858993460 result=40 06:07:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:23 Parameters OK 06:07:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:23 Set A/D data flow result=40 06:07:23 Set A/D channel type result=40 06:07:23 Set A/D encoding result=40 06:07:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:23 Set channel filter=0.000000e+000 result=40 06:07:23 Config A/D Result=40 06:07:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:23 Get A/D filter: -9.255963e+061 result=40 06:07:23 Get A/D value=-858993460 result=40 06:07:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:23 Aux= 06:07:23 Message to Camera, serial 41881 queued 06:08:00 Received message from Master: op=PointingHead serial=41894 06:08:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:08:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:08:00 Point started: ret=0 06:08:00 point_skyscan result=0 06:08:01 Check angles 06:08:01 SkyScan query 06:08:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:08:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:08:02 Message to Master queued w/err=0: serial=41894 error=0 06:08:07 Received message from Master: op=Filter serial=41895 06:08:07 Color wheel filter change from 0 to 0 06:08:07 FLIGetFilterPos err=0 currentPosition=0 06:08:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:07 Filter is already there-color wheel unchanged 06:08:07 Received message from Master: op=Shutter serial=41896 06:08:07 Shutter LASER close 06:08:07 Received message from Camera: op=State serial=41898 06:08:07 GetSingleValue result=40 Value=cccccccc 06:08:07 SkyScan query 06:08:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:08:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:07 Parameters OK 06:08:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:07 Set A/D data flow result=40 06:08:07 Set A/D channel type result=40 06:08:07 Set A/D encoding result=40 06:08:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:07 Set channel filter=0.000000e+000 result=40 06:08:07 Config A/D Result=40 06:08:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:07 Get A/D filter: -9.255963e+061 result=40 06:08:07 Get A/D value=-858993460 result=40 06:08:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:07 Parameters OK 06:08:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:07 Set A/D data flow result=40 06:08:07 Set A/D channel type result=40 06:08:07 Set A/D encoding result=40 06:08:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:07 Set channel filter=0.000000e+000 result=40 06:08:07 Config A/D Result=40 06:08:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:07 Get A/D filter: -9.255963e+061 result=40 06:08:07 Get A/D value=-858993460 result=40 06:08:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:07 Aux= 06:08:07 Message to Camera, serial 41898 queued 06:08:44 Received message from Master: op=PointingHead serial=41911 06:08:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:08:44 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:08:45 Point started: ret=0 06:08:45 point_skyscan result=0 06:08:45 Check angles 06:08:45 SkyScan query 06:08:46 SkyScan query done: ret=0 az=136.185<-9079 ze=-6.51<-12434 Statuses=0009 0008 06:08:46 Msec=0 True Az=136.185 Ze=-6.51 Az status=0009 Ze status=0008 06:08:46 Check angles 06:08:46 SkyScan query 06:08:47 SkyScan query done: ret=0 az=154.125<-10275 ze=-6.495<-12433 Statuses=0009 0008 06:08:47 Msec=750 True Az=154.125 Ze=-6.495 Az status=0009 Ze status=0008 06:08:47 Check angles 06:08:47 SkyScan query 06:08:47 SkyScan query done: ret=0 az=171.57<-11438 ze=-6.495<-12433 Statuses=0009 0008 06:08:47 Msec=1500 True Az=171.57 Ze=-6.495 Az status=0009 Ze status=0008 06:08:48 Check angles 06:08:48 SkyScan query 06:08:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:08:48 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:08:48 Message to Master queued w/err=0: serial=41911 error=0 06:08:53 Received message from Master: op=Filter serial=41912 06:08:53 Color wheel filter change from 0 to 0 06:08:53 FLIGetFilterPos err=0 currentPosition=0 06:08:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:53 Filter is already there-color wheel unchanged 06:08:53 Received message from Master: op=Shutter serial=41913 06:08:53 Shutter LASER close 06:08:53 Received message from Camera: op=State serial=41915 06:08:53 GetSingleValue result=40 Value=cccccccc 06:08:53 SkyScan query 06:08:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:08:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:54 Parameters OK 06:08:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:54 Set A/D data flow result=40 06:08:54 Set A/D channel type result=40 06:08:54 Set A/D encoding result=40 06:08:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:54 Set channel filter=0.000000e+000 result=40 06:08:54 Config A/D Result=40 06:08:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:54 Get A/D filter: -9.255963e+061 result=40 06:08:54 Get A/D value=-858993460 result=40 06:08:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:54 Parameters OK 06:08:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:54 Set A/D data flow result=40 06:08:54 Set A/D channel type result=40 06:08:54 Set A/D encoding result=40 06:08:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:54 Set channel filter=0.000000e+000 result=40 06:08:54 Config A/D Result=40 06:08:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:54 Get A/D filter: -9.255963e+061 result=40 06:08:54 Get A/D value=-858993460 result=40 06:08:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:54 Aux= 06:08:54 Message to Camera, serial 41915 queued 06:09:31 Received message from Master: op=PointingHead serial=41928 06:09:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:09:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:09:31 Point started: ret=0 06:09:31 point_skyscan result=0 06:09:32 Check angles 06:09:32 SkyScan query 06:09:32 SkyScan query done: ret=0 az=153.255<-10217 ze=6.51<-11566 Statuses=0009 0008 06:09:32 Msec=0 True Az=153.255 Ze=6.51 Az status=0009 Ze status=0008 06:09:33 Check angles 06:09:33 SkyScan query 06:09:33 SkyScan query done: ret=0 az=135.75<-9050 ze=6.495<-11567 Statuses=0009 0008 06:09:33 Msec=750 True Az=135.75 Ze=6.495 Az status=0009 Ze status=0008 06:09:33 Check angles 06:09:33 SkyScan query 06:09:34 SkyScan query done: ret=0 az=118.335<-7889 ze=6.495<-11567 Statuses=0009 0008 06:09:34 Msec=1500 True Az=118.335 Ze=6.495 Az status=0009 Ze status=0008 06:09:34 Check angles 06:09:34 SkyScan query 06:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:09:35 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:09:35 Message to Master queued w/err=0: serial=41928 error=0 06:09:40 Received message from Master: op=Filter serial=41929 06:09:40 Color wheel filter change from 0 to 0 06:09:40 FLIGetFilterPos err=0 currentPosition=0 06:09:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:40 Filter is already there-color wheel unchanged 06:09:40 Received message from Master: op=Shutter serial=41930 06:09:40 Shutter LASER close 06:09:40 Received message from Camera: op=State serial=41932 06:09:40 GetSingleValue result=40 Value=cccccccc 06:09:40 SkyScan query 06:09:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:09:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:40 Parameters OK 06:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:40 Set A/D data flow result=40 06:09:40 Set A/D channel type result=40 06:09:40 Set A/D encoding result=40 06:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:40 Set channel filter=0.000000e+000 result=40 06:09:40 Config A/D Result=40 06:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:40 Get A/D filter: -9.255963e+061 result=40 06:09:40 Get A/D value=-858993460 result=40 06:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:40 Parameters OK 06:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:40 Set A/D data flow result=40 06:09:40 Set A/D channel type result=40 06:09:40 Set A/D encoding result=40 06:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:40 Set channel filter=0.000000e+000 result=40 06:09:40 Config A/D Result=40 06:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:40 Get A/D filter: -9.255963e+061 result=40 06:09:40 Get A/D value=-858993460 result=40 06:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:40 Aux= 06:09:40 Message to Camera, serial 41932 queued 06:10:17 Received message from Master: op=PointingHead serial=41945 06:10:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:10:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:10:18 Point started: ret=0 06:10:18 point_skyscan result=0 06:10:18 Check angles 06:10:18 SkyScan query 06:10:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.4<-13560 Statuses=0008 0009 06:10:19 Msec=0 True Az=112.995 Ze=-23.4 Az status=0008 Ze status=0009 06:10:19 Check angles 06:10:19 SkyScan query 06:10:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 06:10:20 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 06:10:20 Check angles 06:10:20 SkyScan query 06:10:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.325<-16355 Statuses=0008 0009 06:10:21 Msec=1500 True Az=112.995 Ze=-65.325 Az status=0008 Ze status=0009 06:10:21 Check angles 06:10:21 SkyScan query 06:10:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.295<-17753 Statuses=0008 0009 06:10:21 Msec=2250 True Az=112.995 Ze=-86.295 Az status=0008 Ze status=0009 06:10:21 Check angles 06:10:21 SkyScan query 06:10:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.235<-19149 Statuses=0008 0009 06:10:22 Msec=3000 True Az=112.995 Ze=-107.235 Az status=0008 Ze status=0009 06:10:22 Check angles 06:10:22 SkyScan query 06:10:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.19<-20546 Statuses=0008 0009 06:10:23 Msec=3750 True Az=112.995 Ze=-128.19 Az status=0008 Ze status=0009 06:10:23 Check angles 06:10:23 SkyScan query 06:10:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.16<-21944 Statuses=0008 0009 06:10:24 Msec=4500 True Az=112.995 Ze=-149.16 Az status=0008 Ze status=0009 06:10:24 Check angles 06:10:24 SkyScan query 06:10:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.1<-23340 Statuses=0008 0009 06:10:24 Msec=5250 True Az=112.995 Ze=-170.1 Az status=0008 Ze status=0009 06:10:24 Check angles 06:10:24 SkyScan query 06:10:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:10:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:10:25 Message to Master queued w/err=0: serial=41945 error=0 06:10:30 Received message from Master: op=Filter serial=41946 06:10:30 Color wheel filter change from 0 to 0 06:10:30 FLIGetFilterPos err=0 currentPosition=0 06:10:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:30 Filter is already there-color wheel unchanged 06:10:30 Received message from Master: op=Shutter serial=41947 06:10:30 Shutter LASER open 06:10:30 Received message from Camera: op=State serial=41949 06:10:30 GetSingleValue result=40 Value=cccccccc 06:10:30 SkyScan query 06:10:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:10:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:31 Parameters OK 06:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:31 Set A/D data flow result=40 06:10:31 Set A/D channel type result=40 06:10:31 Set A/D encoding result=40 06:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:31 Set channel filter=0.000000e+000 result=40 06:10:31 Config A/D Result=40 06:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:31 Get A/D filter: -9.255963e+061 result=40 06:10:31 Get A/D value=-858993460 result=40 06:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:31 Parameters OK 06:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:31 Set A/D data flow result=40 06:10:31 Set A/D channel type result=40 06:10:31 Set A/D encoding result=40 06:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:31 Set channel filter=0.000000e+000 result=40 06:10:31 Config A/D Result=40 06:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:31 Get A/D filter: -9.255963e+061 result=40 06:10:31 Get A/D value=-858993460 result=40 06:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:31 Aux= 06:10:31 Message to Camera, serial 41949 queued 06:10:39 Received message from Master: op=Shutter serial=41959 06:10:39 Shutter LASER close 06:10:40 Received message from Master: op=PointingHead serial=41963 06:10:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:10:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:10:40 Point started: ret=0 06:10:40 point_skyscan result=0 06:10:41 Check angles 06:10:41 SkyScan query 06:10:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 06:10:42 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 06:10:42 Check angles 06:10:42 SkyScan query 06:10:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 06:10:42 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 06:10:42 Check angles 06:10:42 SkyScan query 06:10:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 06:10:43 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 06:10:43 Check angles 06:10:43 SkyScan query 06:10:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 06:10:44 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 06:10:44 Check angles 06:10:44 SkyScan query 06:10:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 06:10:45 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 06:10:45 Check angles 06:10:45 SkyScan query 06:10:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.965<-14531 Statuses=0008 0009 06:10:45 Msec=3750 True Az=112.995 Ze=-37.965 Az status=0008 Ze status=0009 06:10:45 Check angles 06:10:45 SkyScan query 06:10:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.995<-13133 Statuses=0008 0009 06:10:46 Msec=4500 True Az=112.995 Ze=-16.995 Az status=0008 Ze status=0009 06:10:46 Check angles 06:10:46 SkyScan query 06:10:47 SkyScan query done: ret=0 az=112.995<-7533 ze=3.945<-11737 Statuses=0008 0009 06:10:47 Msec=5250 True Az=112.995 Ze=3.945 Az status=0008 Ze status=0009 06:10:47 Check angles 06:10:47 SkyScan query 06:10:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:10:48 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:10:48 Message to Master queued w/err=0: serial=41963 error=0 06:10:53 Received message from Master: op=Filter serial=41964 06:10:53 Color wheel filter change from 0 to 0 06:10:53 FLIGetFilterPos err=0 currentPosition=0 06:10:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:53 Filter is already there-color wheel unchanged 06:10:53 Received message from Master: op=Shutter serial=41965 06:10:53 Shutter LASER close 06:10:53 Received message from Camera: op=State serial=41967 06:10:53 GetSingleValue result=40 Value=cccccccc 06:10:53 SkyScan query 06:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:10:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:53 Parameters OK 06:10:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:53 Set A/D data flow result=40 06:10:53 Set A/D channel type result=40 06:10:53 Set A/D encoding result=40 06:10:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:53 Set channel filter=0.000000e+000 result=40 06:10:53 Config A/D Result=40 06:10:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:53 Get A/D filter: -9.255963e+061 result=40 06:10:53 Get A/D value=-858993460 result=40 06:10:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:53 Parameters OK 06:10:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:53 Set A/D data flow result=40 06:10:53 Set A/D channel type result=40 06:10:53 Set A/D encoding result=40 06:10:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:53 Set channel filter=0.000000e+000 result=40 06:10:53 Config A/D Result=40 06:10:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:53 Get A/D filter: -9.255963e+061 result=40 06:10:53 Get A/D value=-858993460 result=40 06:10:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:53 Aux= 06:10:53 Message to Camera, serial 41967 queued 06:11:30 Received message from Master: op=PointingHead serial=41980 06:11:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:11:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:11:31 Point started: ret=0 06:11:31 point_skyscan result=0 06:11:31 Check angles 06:11:31 SkyScan query 06:11:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:11:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:11:32 Message to Master queued w/err=0: serial=41980 error=0 06:11:37 Received message from Master: op=Filter serial=41981 06:11:37 Color wheel filter change from 0 to 0 06:11:37 FLIGetFilterPos err=0 currentPosition=0 06:11:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:11:37 Filter is already there-color wheel unchanged 06:11:37 Received message from Master: op=Shutter serial=41982 06:11:37 Shutter LASER close 06:11:37 Received message from Camera: op=State serial=41984 06:11:37 GetSingleValue result=40 Value=cccccccc 06:11:37 SkyScan query 06:11:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:11:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:38 Parameters OK 06:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:38 Set A/D data flow result=40 06:11:38 Set A/D channel type result=40 06:11:38 Set A/D encoding result=40 06:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:38 Set channel filter=0.000000e+000 result=40 06:11:38 Config A/D Result=40 06:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:38 Get A/D filter: -9.255963e+061 result=40 06:11:38 Get A/D value=-858993460 result=40 06:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:38 Parameters OK 06:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:38 Set A/D data flow result=40 06:11:38 Set A/D channel type result=40 06:11:38 Set A/D encoding result=40 06:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:38 Set channel filter=0.000000e+000 result=40 06:11:38 Config A/D Result=40 06:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:38 Get A/D filter: -9.255963e+061 result=40 06:11:38 Get A/D value=-858993460 result=40 06:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:11:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:11:38 Aux= 06:11:38 Message to Camera, serial 41984 queued 06:12:15 Received message from Master: op=PointingHead serial=41997 06:12:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:12:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:12:15 Point started: ret=0 06:12:15 point_skyscan result=0 06:12:16 Check angles 06:12:16 SkyScan query 06:12:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:12:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:12:16 Message to Master queued w/err=0: serial=41997 error=0 06:12:21 Received message from Master: op=Filter serial=41998 06:12:21 Color wheel filter change from 0 to 0 06:12:21 FLIGetFilterPos err=0 currentPosition=0 06:12:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:21 Filter is already there-color wheel unchanged 06:12:21 Received message from Master: op=Shutter serial=41999 06:12:21 Shutter LASER close 06:12:21 Received message from Camera: op=State serial=42001 06:12:21 GetSingleValue result=40 Value=cccccccc 06:12:21 SkyScan query 06:12:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:12:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:22 Parameters OK 06:12:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:22 Set A/D data flow result=40 06:12:22 Set A/D channel type result=40 06:12:22 Set A/D encoding result=40 06:12:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:22 Set channel filter=0.000000e+000 result=40 06:12:22 Config A/D Result=40 06:12:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:22 Get A/D filter: -9.255963e+061 result=40 06:12:22 Get A/D value=-858993460 result=40 06:12:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:22 Parameters OK 06:12:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:22 Set A/D data flow result=40 06:12:22 Set A/D channel type result=40 06:12:22 Set A/D encoding result=40 06:12:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:22 Set channel filter=0.000000e+000 result=40 06:12:22 Config A/D Result=40 06:12:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:22 Get A/D filter: -9.255963e+061 result=40 06:12:22 Get A/D value=-858993460 result=40 06:12:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:22 Aux= 06:12:22 Message to Camera, serial 42001 queued 06:12:59 Received message from Master: op=PointingHead serial=42014 06:12:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:12:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:12:59 Point started: ret=0 06:12:59 point_skyscan result=0 06:13:00 Check angles 06:13:00 SkyScan query 06:13:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:13:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:13:01 Message to Master queued w/err=0: serial=42014 error=0 06:13:06 Received message from Master: op=Filter serial=42015 06:13:06 Color wheel filter change from 0 to 0 06:13:06 FLIGetFilterPos err=0 currentPosition=0 06:13:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:06 Filter is already there-color wheel unchanged 06:13:06 Received message from Master: op=Shutter serial=42016 06:13:06 Shutter LASER close 06:13:06 Received message from Camera: op=State serial=42018 06:13:06 GetSingleValue result=40 Value=cccccccc 06:13:06 SkyScan query 06:13:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:13:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:06 Parameters OK 06:13:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:06 Set A/D data flow result=40 06:13:06 Set A/D channel type result=40 06:13:06 Set A/D encoding result=40 06:13:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:06 Set channel filter=0.000000e+000 result=40 06:13:06 Config A/D Result=40 06:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:06 Get A/D filter: -9.255963e+061 result=40 06:13:06 Get A/D value=-858993460 result=40 06:13:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:06 Parameters OK 06:13:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:06 Set A/D data flow result=40 06:13:06 Set A/D channel type result=40 06:13:06 Set A/D encoding result=40 06:13:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:06 Set channel filter=0.000000e+000 result=40 06:13:06 Config A/D Result=40 06:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:06 Get A/D filter: -9.255963e+061 result=40 06:13:06 Get A/D value=-858993460 result=40 06:13:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:06 Aux= 06:13:06 Message to Camera, serial 42018 queued 06:13:43 Received message from Master: op=PointingHead serial=42031 06:13:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:13:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:13:43 Point started: ret=0 06:13:43 point_skyscan result=0 06:13:44 Check angles 06:13:44 SkyScan query 06:13:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 06:13:45 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 06:13:45 Check angles 06:13:45 SkyScan query 06:13:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 06:13:46 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 06:13:46 Check angles 06:13:46 SkyScan query 06:13:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.52<-16368 Statuses=0008 0009 06:13:46 Msec=1500 True Az=112.995 Ze=-65.52 Az status=0008 Ze status=0009 06:13:46 Check angles 06:13:46 SkyScan query 06:13:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 06:13:47 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 06:13:47 Check angles 06:13:47 SkyScan query 06:13:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 06:13:48 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 06:13:48 Check angles 06:13:48 SkyScan query 06:13:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.355<-20557 Statuses=0008 0009 06:13:49 Msec=3750 True Az=112.995 Ze=-128.355 Az status=0008 Ze status=0009 06:13:49 Check angles 06:13:49 SkyScan query 06:13:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.355<-21957 Statuses=0008 0009 06:13:49 Msec=4500 True Az=112.995 Ze=-149.355 Az status=0008 Ze status=0009 06:13:49 Check angles 06:13:49 SkyScan query 06:13:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.28<-23352 Statuses=0008 0009 06:13:50 Msec=5250 True Az=112.995 Ze=-170.28 Az status=0008 Ze status=0009 06:13:50 Check angles 06:13:50 SkyScan query 06:13:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:13:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:13:51 Message to Master queued w/err=0: serial=42031 error=0 06:13:56 Received message from Master: op=Filter serial=42032 06:13:56 Color wheel filter change from 0 to 0 06:13:56 FLIGetFilterPos err=0 currentPosition=0 06:13:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:56 Filter is already there-color wheel unchanged 06:13:56 Received message from Master: op=Shutter serial=42033 06:13:56 Shutter LASER open 06:13:56 Received message from Camera: op=State serial=42035 06:13:56 GetSingleValue result=40 Value=cccccccc 06:13:56 SkyScan query 06:13:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:13:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:57 Parameters OK 06:13:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:57 Set A/D data flow result=40 06:13:57 Set A/D channel type result=40 06:13:57 Set A/D encoding result=40 06:13:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:57 Set channel filter=0.000000e+000 result=40 06:13:57 Config A/D Result=40 06:13:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:57 Get A/D filter: -9.255963e+061 result=40 06:13:57 Get A/D value=-858993460 result=40 06:13:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:57 Parameters OK 06:13:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:57 Set A/D data flow result=40 06:13:57 Set A/D channel type result=40 06:13:57 Set A/D encoding result=40 06:13:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:57 Set channel filter=0.000000e+000 result=40 06:13:57 Config A/D Result=40 06:13:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:57 Get A/D filter: -9.255963e+061 result=40 06:13:57 Get A/D value=-858993460 result=40 06:13:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:57 Aux= 06:13:57 Message to Camera, serial 42035 queued 06:14:05 Received message from Master: op=Shutter serial=42045 06:14:05 Shutter LASER close 06:14:06 Received message from Master: op=PointingHead serial=42049 06:14:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:14:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:14:06 Point started: ret=0 06:14:06 point_skyscan result=0 06:14:07 Check angles 06:14:07 SkyScan query 06:14:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 06:14:07 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 06:14:08 Check angles 06:14:08 SkyScan query 06:14:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.43<-20162 Statuses=0008 0009 06:14:08 Msec=750 True Az=112.995 Ze=-122.43 Az status=0008 Ze status=0009 06:14:08 Check angles 06:14:08 SkyScan query 06:14:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.475<-18765 Statuses=0008 0009 06:14:09 Msec=1500 True Az=112.995 Ze=-101.475 Az status=0008 Ze status=0009 06:14:09 Check angles 06:14:09 SkyScan query 06:14:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.52<-17368 Statuses=0008 0009 06:14:10 Msec=2250 True Az=112.995 Ze=-80.52 Az status=0008 Ze status=0009 06:14:10 Check angles 06:14:10 SkyScan query 06:14:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.55<-15970 Statuses=0008 0009 06:14:10 Msec=3000 True Az=112.995 Ze=-59.55 Az status=0008 Ze status=0009 06:14:11 Check angles 06:14:11 SkyScan query 06:14:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.595<-14573 Statuses=0008 0009 06:14:11 Msec=3750 True Az=112.995 Ze=-38.595 Az status=0008 Ze status=0009 06:14:11 Check angles 06:14:11 SkyScan query 06:14:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.64<-13176 Statuses=0008 0009 06:14:12 Msec=4500 True Az=112.995 Ze=-17.64 Az status=0008 Ze status=0009 06:14:12 Check angles 06:14:12 SkyScan query 06:14:13 SkyScan query done: ret=0 az=112.995<-7533 ze=3.315<-11779 Statuses=0008 0009 06:14:13 Msec=5250 True Az=112.995 Ze=3.315 Az status=0008 Ze status=0009 [UTC 2019-3-1 06:14:13] 06:14:13 Check angles 06:14:13 SkyScan query 06:14:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:14:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:14:13 Message to Master queued w/err=0: serial=42049 error=0 06:14:18 Received message from Master: op=Filter serial=42050 06:14:18 Color wheel filter change from 0 to 0 06:14:18 FLIGetFilterPos err=0 currentPosition=0 06:14:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:18 Filter is already there-color wheel unchanged 06:14:19 Received message from Master: op=Shutter serial=42051 06:14:19 Shutter LASER close 06:14:19 Received message from Camera: op=State serial=42053 06:14:19 GetSingleValue result=40 Value=cccccccc 06:14:19 SkyScan query 06:14:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:14:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:19 Parameters OK 06:14:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:19 Set A/D data flow result=40 06:14:19 Set A/D channel type result=40 06:14:19 Set A/D encoding result=40 06:14:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:19 Set channel filter=0.000000e+000 result=40 06:14:19 Config A/D Result=40 06:14:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:19 Get A/D filter: -9.255963e+061 result=40 06:14:19 Get A/D value=-858993460 result=40 06:14:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:19 Parameters OK 06:14:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:19 Set A/D data flow result=40 06:14:19 Set A/D channel type result=40 06:14:19 Set A/D encoding result=40 06:14:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:19 Set channel filter=0.000000e+000 result=40 06:14:19 Config A/D Result=40 06:14:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:19 Get A/D filter: -9.255963e+061 result=40 06:14:19 Get A/D value=-858993460 result=40 06:14:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:19 Aux= 06:14:19 Message to Camera, serial 42053 queued 06:14:55 Received message from Master: op=PointingHead serial=42065 06:14:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:14:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:14:56 Point started: ret=0 06:14:56 point_skyscan result=0 06:14:56 Check angles 06:14:56 SkyScan query 06:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:14:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:14:57 Message to Master queued w/err=0: serial=42065 error=0 06:15:02 Received message from Master: op=Filter serial=42066 06:15:02 Color wheel filter change from 0 to 0 06:15:02 FLIGetFilterPos err=0 currentPosition=0 06:15:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:02 Filter is already there-color wheel unchanged 06:15:02 Received message from Master: op=Shutter serial=42067 06:15:02 Shutter LASER close 06:15:02 Received message from Camera: op=State serial=42069 06:15:02 GetSingleValue result=40 Value=cccccccc 06:15:02 SkyScan query 06:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:15:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:03 Parameters OK 06:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:03 Set A/D data flow result=40 06:15:03 Set A/D channel type result=40 06:15:03 Set A/D encoding result=40 06:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:03 Set channel filter=0.000000e+000 result=40 06:15:03 Config A/D Result=40 06:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:03 Get A/D filter: -9.255963e+061 result=40 06:15:03 Get A/D value=-858993460 result=40 06:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:03 Parameters OK 06:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:03 Set A/D data flow result=40 06:15:03 Set A/D channel type result=40 06:15:03 Set A/D encoding result=40 06:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:03 Set channel filter=0.000000e+000 result=40 06:15:03 Config A/D Result=40 06:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:03 Get A/D filter: -9.255963e+061 result=40 06:15:03 Get A/D value=-858993460 result=40 06:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:03 Aux= 06:15:03 Message to Camera, serial 42069 queued 06:15:40 Received message from Master: op=PointingHead serial=42082 06:15:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:15:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:15:40 Point started: ret=0 06:15:40 point_skyscan result=0 06:15:41 Check angles 06:15:41 SkyScan query 06:15:41 SkyScan query done: ret=0 az=135.72<-9048 ze=-6.51<-12434 Statuses=0009 0008 06:15:41 Msec=0 True Az=135.72 Ze=-6.51 Az status=0009 Ze status=0008 06:15:41 Check angles 06:15:41 SkyScan query 06:15:42 SkyScan query done: ret=0 az=153.33<-10222 ze=-6.495<-12433 Statuses=0009 0008 06:15:42 Msec=750 True Az=153.33 Ze=-6.495 Az status=0009 Ze status=0008 06:15:42 Check angles 06:15:42 SkyScan query 06:15:43 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 06:15:43 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 06:15:43 Check angles 06:15:43 SkyScan query 06:15:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:15:44 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:15:44 Message to Master queued w/err=0: serial=42082 error=0 06:15:49 Received message from Master: op=Filter serial=42083 06:15:49 Color wheel filter change from 0 to 0 06:15:49 FLIGetFilterPos err=0 currentPosition=0 06:15:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:49 Filter is already there-color wheel unchanged 06:15:49 Received message from Master: op=Shutter serial=42084 06:15:49 Shutter LASER close 06:15:49 Received message from Camera: op=State serial=42086 06:15:49 GetSingleValue result=40 Value=cccccccc 06:15:49 SkyScan query 06:15:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:15:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:49 Parameters OK 06:15:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:49 Set A/D data flow result=40 06:15:49 Set A/D channel type result=40 06:15:49 Set A/D encoding result=40 06:15:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:49 Set channel filter=0.000000e+000 result=40 06:15:49 Config A/D Result=40 06:15:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:49 Get A/D filter: -9.255963e+061 result=40 06:15:49 Get A/D value=-858993460 result=40 06:15:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:49 Parameters OK 06:15:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:49 Set A/D data flow result=40 06:15:49 Set A/D channel type result=40 06:15:49 Set A/D encoding result=40 06:15:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:49 Set channel filter=0.000000e+000 result=40 06:15:49 Config A/D Result=40 06:15:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:49 Get A/D filter: -9.255963e+061 result=40 06:15:49 Get A/D value=-858993460 result=40 06:15:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:49 Aux= 06:15:49 Message to Camera, serial 42086 queued 06:16:26 Received message from Master: op=PointingHead serial=42099 06:16:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:16:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:16:26 Point started: ret=0 06:16:26 point_skyscan result=0 06:16:27 Check angles 06:16:27 SkyScan query 06:16:28 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 06:16:28 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 06:16:28 Check angles 06:16:28 SkyScan query 06:16:29 SkyScan query done: ret=0 az=135.63<-9042 ze=6.495<-11567 Statuses=0009 0008 06:16:29 Msec=750 True Az=135.63 Ze=6.495 Az status=0009 Ze status=0008 06:16:29 Check angles 06:16:29 SkyScan query 06:16:29 SkyScan query done: ret=0 az=118.185<-7879 ze=6.495<-11567 Statuses=0009 0008 06:16:29 Msec=1500 True Az=118.185 Ze=6.495 Az status=0009 Ze status=0008 06:16:29 Check angles 06:16:29 SkyScan query 06:16:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:16:30 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:16:30 Message to Master queued w/err=0: serial=42099 error=0 06:16:35 Received message from Master: op=Filter serial=42100 06:16:35 Color wheel filter change from 0 to 0 06:16:35 FLIGetFilterPos err=0 currentPosition=0 06:16:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:35 Filter is already there-color wheel unchanged 06:16:35 Received message from Master: op=Shutter serial=42101 06:16:35 Shutter LASER close 06:16:35 Received message from Camera: op=State serial=42103 06:16:35 GetSingleValue result=40 Value=cccccccc 06:16:35 SkyScan query 06:16:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:16:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:36 Parameters OK 06:16:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:36 Set A/D data flow result=40 06:16:36 Set A/D channel type result=40 06:16:36 Set A/D encoding result=40 06:16:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:36 Set channel filter=0.000000e+000 result=40 06:16:36 Config A/D Result=40 06:16:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:36 Get A/D filter: -9.255963e+061 result=40 06:16:36 Get A/D value=-858993460 result=40 06:16:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:36 Parameters OK 06:16:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:36 Set A/D data flow result=40 06:16:36 Set A/D channel type result=40 06:16:36 Set A/D encoding result=40 06:16:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:36 Set channel filter=0.000000e+000 result=40 06:16:36 Config A/D Result=40 06:16:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:36 Get A/D filter: -9.255963e+061 result=40 06:16:36 Get A/D value=-858993460 result=40 06:16:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:36 Aux= 06:16:36 Message to Camera, serial 42103 queued 06:17:13 Received message from Master: op=PointingHead serial=42116 06:17:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:17:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:17:13 Point started: ret=0 06:17:13 point_skyscan result=0 06:17:14 Check angles 06:17:14 SkyScan query 06:17:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 06:17:14 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 06:17:15 Check angles 06:17:15 SkyScan query 06:17:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 06:17:15 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 06:17:15 Check angles 06:17:15 SkyScan query 06:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.52<-16368 Statuses=0008 0009 06:17:16 Msec=1500 True Az=112.995 Ze=-65.52 Az status=0008 Ze status=0009 06:17:16 Check angles 06:17:16 SkyScan query 06:17:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 06:17:17 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 06:17:17 Check angles 06:17:17 SkyScan query 06:17:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 06:17:17 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 06:17:18 Check angles 06:17:18 SkyScan query 06:17:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 06:17:18 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 06:17:18 Check angles 06:17:18 SkyScan query 06:17:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 06:17:19 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 06:17:19 Check angles 06:17:19 SkyScan query 06:17:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 06:17:20 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 06:17:20 Check angles 06:17:20 SkyScan query 06:17:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:17:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:17:20 Message to Master queued w/err=0: serial=42116 error=0 06:17:25 Received message from Master: op=Filter serial=42117 06:17:25 Color wheel filter change from 0 to 0 06:17:25 FLIGetFilterPos err=0 currentPosition=0 06:17:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:25 Filter is already there-color wheel unchanged 06:17:26 Received message from Master: op=Shutter serial=42118 06:17:26 Shutter LASER open 06:17:26 Received message from Camera: op=State serial=42120 06:17:26 GetSingleValue result=40 Value=cccccccc 06:17:26 SkyScan query 06:17:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:17:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:26 Parameters OK 06:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:26 Set A/D data flow result=40 06:17:26 Set A/D channel type result=40 06:17:26 Set A/D encoding result=40 06:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:26 Set channel filter=0.000000e+000 result=40 06:17:26 Config A/D Result=40 06:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:26 Get A/D filter: -9.255963e+061 result=40 06:17:26 Get A/D value=-858993460 result=40 06:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:26 Parameters OK 06:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:26 Set A/D data flow result=40 06:17:26 Set A/D channel type result=40 06:17:26 Set A/D encoding result=40 06:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:26 Set channel filter=0.000000e+000 result=40 06:17:26 Config A/D Result=40 06:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:26 Get A/D filter: -9.255963e+061 result=40 06:17:26 Get A/D value=-858993460 result=40 06:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:26 Aux= 06:17:26 Message to Camera, serial 42120 queued 06:17:35 Received message from Master: op=Shutter serial=42130 06:17:35 Shutter LASER close 06:17:35 Received message from Master: op=PointingHead serial=42134 06:17:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:17:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:17:36 Point started: ret=0 06:17:36 point_skyscan result=0 06:17:36 Check angles 06:17:36 SkyScan query 06:17:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 06:17:37 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 06:17:37 Check angles 06:17:37 SkyScan query 06:17:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 06:17:38 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 06:17:38 Check angles 06:17:38 SkyScan query 06:17:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 06:17:38 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 06:17:39 Check angles 06:17:39 SkyScan query 06:17:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 06:17:39 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 06:17:39 Check angles 06:17:39 SkyScan query 06:17:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 06:17:40 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 06:17:40 Check angles 06:17:40 SkyScan query 06:17:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.115<-14541 Statuses=0008 0009 06:17:41 Msec=3750 True Az=112.995 Ze=-38.115 Az status=0008 Ze status=0009 06:17:41 Check angles 06:17:41 SkyScan query 06:17:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.175<-13145 Statuses=0008 0009 06:17:41 Msec=4500 True Az=112.995 Ze=-17.175 Az status=0008 Ze status=0009 06:17:42 Check angles 06:17:42 SkyScan query 06:17:42 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 06:17:42 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 06:17:42 Check angles 06:17:42 SkyScan query 06:17:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:17:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:17:43 Message to Master queued w/err=0: serial=42134 error=0 06:17:48 Received message from Master: op=Filter serial=42135 06:17:48 Color wheel filter change from 0 to 0 06:17:48 FLIGetFilterPos err=0 currentPosition=0 06:17:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:48 Filter is already there-color wheel unchanged 06:17:48 Received message from Master: op=Shutter serial=42136 06:17:48 Shutter LASER close 06:17:48 Received message from Camera: op=State serial=42138 06:17:48 GetSingleValue result=40 Value=cccccccc 06:17:48 SkyScan query 06:17:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:17:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:49 Parameters OK 06:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:49 Set A/D data flow result=40 06:17:49 Set A/D channel type result=40 06:17:49 Set A/D encoding result=40 06:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:49 Set channel filter=0.000000e+000 result=40 06:17:49 Config A/D Result=40 06:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:49 Get A/D filter: -9.255963e+061 result=40 06:17:49 Get A/D value=-858993460 result=40 06:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:49 Parameters OK 06:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:49 Set A/D data flow result=40 06:17:49 Set A/D channel type result=40 06:17:49 Set A/D encoding result=40 06:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:49 Set channel filter=0.000000e+000 result=40 06:17:49 Config A/D Result=40 06:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:49 Get A/D filter: -9.255963e+061 result=40 06:17:49 Get A/D value=-858993460 result=40 06:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:49 Aux= 06:17:49 Message to Camera, serial 42138 queued 06:18:26 Received message from Master: op=PointingHead serial=42151 06:18:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:18:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:18:26 Point started: ret=0 06:18:26 point_skyscan result=0 06:18:27 Check angles 06:18:27 SkyScan query 06:18:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:18:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:18:27 Message to Master queued w/err=0: serial=42151 error=0 06:18:32 Received message from Master: op=Filter serial=42152 06:18:32 Color wheel filter change from 0 to 0 06:18:32 FLIGetFilterPos err=0 currentPosition=0 06:18:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:32 Filter is already there-color wheel unchanged 06:18:32 Received message from Master: op=Shutter serial=42153 06:18:32 Shutter LASER close 06:18:33 Received message from Camera: op=State serial=42155 06:18:33 GetSingleValue result=40 Value=cccccccc 06:18:33 SkyScan query 06:18:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:18:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:33 Parameters OK 06:18:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:33 Set A/D data flow result=40 06:18:33 Set A/D channel type result=40 06:18:33 Set A/D encoding result=40 06:18:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:33 Set channel filter=0.000000e+000 result=40 06:18:33 Config A/D Result=40 06:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:33 Get A/D filter: -9.255963e+061 result=40 06:18:33 Get A/D value=-858993460 result=40 06:18:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:33 Parameters OK 06:18:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:33 Set A/D data flow result=40 06:18:33 Set A/D channel type result=40 06:18:33 Set A/D encoding result=40 06:18:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:33 Set channel filter=0.000000e+000 result=40 06:18:33 Config A/D Result=40 06:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:33 Get A/D filter: -9.255963e+061 result=40 06:18:33 Get A/D value=-858993460 result=40 06:18:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:33 Aux= 06:18:33 Message to Camera, serial 42155 queued 06:19:10 Received message from Master: op=PointingHead serial=42168 06:19:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:19:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:19:10 Point started: ret=0 06:19:10 point_skyscan result=0 06:19:11 Check angles 06:19:11 SkyScan query 06:19:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:19:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:19:12 Message to Master queued w/err=0: serial=42168 error=0 06:19:17 Received message from Master: op=Filter serial=42169 06:19:17 Color wheel filter change from 0 to 0 06:19:17 FLIGetFilterPos err=0 currentPosition=0 06:19:17 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:17 Filter is already there-color wheel unchanged 06:19:17 Received message from Master: op=Shutter serial=42170 06:19:17 Shutter LASER close 06:19:17 Received message from Camera: op=State serial=42172 06:19:17 GetSingleValue result=40 Value=cccccccc 06:19:17 SkyScan query 06:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:19:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:17 Parameters OK 06:19:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:17 Set A/D data flow result=40 06:19:17 Set A/D channel type result=40 06:19:17 Set A/D encoding result=40 06:19:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:17 Set channel filter=0.000000e+000 result=40 06:19:17 Config A/D Result=40 06:19:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:17 Get A/D filter: -9.255963e+061 result=40 06:19:17 Get A/D value=-858993460 result=40 06:19:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:17 Parameters OK 06:19:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:17 Set A/D data flow result=40 06:19:17 Set A/D channel type result=40 06:19:17 Set A/D encoding result=40 06:19:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:17 Set channel filter=0.000000e+000 result=40 06:19:17 Config A/D Result=40 06:19:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:17 Get A/D filter: -9.255963e+061 result=40 06:19:17 Get A/D value=-858993460 result=40 06:19:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:17 Aux= 06:19:17 Message to Camera, serial 42172 queued 06:19:53 Received message from Master: op=PointingHead serial=42184 06:19:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:19:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:19:54 Point started: ret=0 06:19:54 point_skyscan result=0 06:19:54 Check angles 06:19:54 SkyScan query 06:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:19:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:19:55 Message to Master queued w/err=0: serial=42184 error=0 06:20:00 Received message from Master: op=Filter serial=42185 06:20:00 Color wheel filter change from 0 to 0 06:20:00 FLIGetFilterPos err=0 currentPosition=0 06:20:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:00 Filter is already there-color wheel unchanged 06:20:00 Received message from Master: op=Shutter serial=42186 06:20:00 Shutter LASER close 06:20:00 Received message from Camera: op=State serial=42188 06:20:00 GetSingleValue result=40 Value=cccccccc 06:20:00 SkyScan query 06:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:20:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:01 Parameters OK 06:20:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:01 Set A/D data flow result=40 06:20:01 Set A/D channel type result=40 06:20:01 Set A/D encoding result=40 06:20:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:01 Set channel filter=0.000000e+000 result=40 06:20:01 Config A/D Result=40 06:20:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:01 Get A/D filter: -9.255963e+061 result=40 06:20:01 Get A/D value=-858993460 result=40 06:20:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:01 Parameters OK 06:20:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:01 Set A/D data flow result=40 06:20:01 Set A/D channel type result=40 06:20:01 Set A/D encoding result=40 06:20:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:01 Set channel filter=0.000000e+000 result=40 06:20:01 Config A/D Result=40 06:20:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:01 Get A/D filter: -9.255963e+061 result=40 06:20:01 Get A/D value=-858993460 result=40 06:20:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:01 Aux= 06:20:01 Message to Camera, serial 42188 queued 06:20:37 Received message from Master: op=PointingHead serial=42200 06:20:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:20:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:20:37 Point started: ret=0 06:20:37 point_skyscan result=0 06:20:38 Check angles 06:20:38 SkyScan query 06:20:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 06:20:38 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 06:20:38 Check angles 06:20:38 SkyScan query 06:20:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 06:20:39 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 06:20:39 Check angles 06:20:39 SkyScan query 06:20:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.28<-16352 Statuses=0008 0009 06:20:40 Msec=1500 True Az=112.995 Ze=-65.28 Az status=0008 Ze status=0009 06:20:40 Check angles 06:20:40 SkyScan query 06:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.235<-17749 Statuses=0008 0009 06:20:41 Msec=2250 True Az=112.995 Ze=-86.235 Az status=0008 Ze status=0009 06:20:41 Check angles 06:20:41 SkyScan query 06:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.175<-19145 Statuses=0008 0009 06:20:41 Msec=3000 True Az=112.995 Ze=-107.175 Az status=0008 Ze status=0009 06:20:41 Check angles 06:20:41 SkyScan query 06:20:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.13<-20542 Statuses=0008 0009 06:20:42 Msec=3750 True Az=112.995 Ze=-128.13 Az status=0008 Ze status=0009 06:20:42 Check angles 06:20:42 SkyScan query 06:20:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.1<-21940 Statuses=0008 0009 06:20:43 Msec=4500 True Az=112.995 Ze=-149.1 Az status=0008 Ze status=0009 06:20:43 Check angles 06:20:43 SkyScan query 06:20:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.04<-23336 Statuses=0008 0009 06:20:44 Msec=5250 True Az=112.995 Ze=-170.04 Az status=0008 Ze status=0009 06:20:44 Check angles 06:20:44 SkyScan query 06:20:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:20:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:20:44 Message to Master queued w/err=0: serial=42200 error=0 06:20:49 Received message from Master: op=Filter serial=42201 06:20:49 Color wheel filter change from 0 to 0 06:20:49 FLIGetFilterPos err=0 currentPosition=0 06:20:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:49 Filter is already there-color wheel unchanged 06:20:49 Received message from Master: op=Shutter serial=42202 06:20:49 Shutter LASER open 06:20:50 Received message from Camera: op=State serial=42204 06:20:50 GetSingleValue result=40 Value=cccccccc 06:20:50 SkyScan query 06:20:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:20:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:50 Parameters OK 06:20:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:50 Set A/D data flow result=40 06:20:50 Set A/D channel type result=40 06:20:50 Set A/D encoding result=40 06:20:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:50 Set channel filter=0.000000e+000 result=40 06:20:50 Config A/D Result=40 06:20:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:50 Get A/D filter: -9.255963e+061 result=40 06:20:50 Get A/D value=-858993460 result=40 06:20:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:50 Parameters OK 06:20:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:50 Set A/D data flow result=40 06:20:50 Set A/D channel type result=40 06:20:50 Set A/D encoding result=40 06:20:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:50 Set channel filter=0.000000e+000 result=40 06:20:50 Config A/D Result=40 06:20:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:50 Get A/D filter: -9.255963e+061 result=40 06:20:50 Get A/D value=-858993460 result=40 06:20:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:50 Aux= 06:20:50 Message to Camera, serial 42204 queued 06:20:59 Received message from Master: op=Shutter serial=42214 06:20:59 Shutter LASER close 06:20:59 Received message from Master: op=PointingHead serial=42218 06:20:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:20:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:21:00 Point started: ret=0 06:21:00 point_skyscan result=0 06:21:00 Check angles 06:21:00 SkyScan query 06:21:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 06:21:01 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 06:21:01 Check angles 06:21:01 SkyScan query 06:21:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 06:21:02 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 06:21:02 Check angles 06:21:02 SkyScan query 06:21:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 06:21:02 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 06:21:03 Check angles 06:21:03 SkyScan query 06:21:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.34<-17356 Statuses=0008 0009 06:21:03 Msec=2250 True Az=112.995 Ze=-80.34 Az status=0008 Ze status=0009 06:21:03 Check angles 06:21:03 SkyScan query 06:21:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.385<-15959 Statuses=0008 0009 06:21:04 Msec=3000 True Az=112.995 Ze=-59.385 Az status=0008 Ze status=0009 06:21:04 Check angles 06:21:04 SkyScan query 06:21:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.415<-14561 Statuses=0008 0009 06:21:05 Msec=3750 True Az=112.995 Ze=-38.415 Az status=0008 Ze status=0009 06:21:05 Check angles 06:21:05 SkyScan query 06:21:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.475<-13165 Statuses=0008 0009 06:21:05 Msec=4500 True Az=112.995 Ze=-17.475 Az status=0008 Ze status=0009 06:21:06 Check angles 06:21:06 SkyScan query 06:21:06 SkyScan query done: ret=0 az=112.995<-7533 ze=3.495<-11767 Statuses=0008 0009 06:21:06 Msec=5250 True Az=112.995 Ze=3.495 Az status=0008 Ze status=0009 06:21:06 Check angles 06:21:06 SkyScan query 06:21:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:21:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:21:07 Message to Master queued w/err=0: serial=42218 error=0 06:21:12 Received message from Master: op=Filter serial=42219 06:21:12 Color wheel filter change from 0 to 0 06:21:12 FLIGetFilterPos err=0 currentPosition=0 06:21:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:12 Filter is already there-color wheel unchanged 06:21:12 Received message from Master: op=Shutter serial=42220 06:21:12 Shutter LASER close 06:21:12 Received message from Camera: op=State serial=42222 06:21:12 GetSingleValue result=40 Value=cccccccc 06:21:12 SkyScan query 06:21:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:13 Parameters OK 06:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:13 Set A/D data flow result=40 06:21:13 Set A/D channel type result=40 06:21:13 Set A/D encoding result=40 06:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:13 Set channel filter=0.000000e+000 result=40 06:21:13 Config A/D Result=40 06:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:13 Get A/D filter: -9.255963e+061 result=40 06:21:13 Get A/D value=-858993460 result=40 06:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:13 Parameters OK 06:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:13 Set A/D data flow result=40 06:21:13 Set A/D channel type result=40 06:21:13 Set A/D encoding result=40 06:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:13 Set channel filter=0.000000e+000 result=40 06:21:13 Config A/D Result=40 06:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:13 Get A/D filter: -9.255963e+061 result=40 06:21:13 Get A/D value=-858993460 result=40 06:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:13 Aux= 06:21:13 Message to Camera, serial 42222 queued 06:21:50 Received message from Master: op=PointingHead serial=42235 06:21:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:21:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:21:50 Point started: ret=0 06:21:50 point_skyscan result=0 06:21:51 Check angles 06:21:51 SkyScan query 06:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:21:51 Message to Master queued w/err=0: serial=42235 error=0 06:21:56 Received message from Master: op=Filter serial=42236 06:21:56 Color wheel filter change from 0 to 0 06:21:56 FLIGetFilterPos err=0 currentPosition=0 06:21:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:56 Filter is already there-color wheel unchanged 06:21:57 Received message from Master: op=Shutter serial=42237 06:21:57 Shutter LASER close 06:21:57 Received message from Camera: op=State serial=42239 06:21:57 GetSingleValue result=40 Value=cccccccc 06:21:57 SkyScan query 06:21:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:57 Parameters OK 06:21:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:57 Set A/D data flow result=40 06:21:57 Set A/D channel type result=40 06:21:57 Set A/D encoding result=40 06:21:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:57 Set channel filter=0.000000e+000 result=40 06:21:57 Config A/D Result=40 06:21:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:57 Get A/D filter: -9.255963e+061 result=40 06:21:57 Get A/D value=-858993460 result=40 06:21:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:57 Parameters OK 06:21:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:57 Set A/D data flow result=40 06:21:57 Set A/D channel type result=40 06:21:57 Set A/D encoding result=40 06:21:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:57 Set channel filter=0.000000e+000 result=40 06:21:57 Config A/D Result=40 06:21:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:57 Get A/D filter: -9.255963e+061 result=40 06:21:57 Get A/D value=-858993460 result=40 06:21:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:57 Aux= 06:21:57 Message to Camera, serial 42239 queued 06:22:34 Received message from Master: op=PointingHead serial=42252 06:22:34 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:22:34 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:22:34 Point started: ret=0 06:22:34 point_skyscan result=0 06:22:35 Check angles 06:22:35 SkyScan query 06:22:36 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 06:22:36 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 06:22:36 Check angles 06:22:36 SkyScan query 06:22:36 SkyScan query done: ret=0 az=153.39<-10226 ze=-6.495<-12433 Statuses=0009 0008 06:22:36 Msec=750 True Az=153.39 Ze=-6.495 Az status=0009 Ze status=0008 06:22:37 Check angles 06:22:37 SkyScan query 06:22:37 SkyScan query done: ret=0 az=171.3<-11420 ze=-6.495<-12433 Statuses=0009 0008 06:22:37 Msec=1500 True Az=171.3 Ze=-6.495 Az status=0009 Ze status=0008 06:22:37 Check angles 06:22:37 SkyScan query 06:22:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:22:38 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:22:38 Message to Master queued w/err=0: serial=42252 error=0 06:22:43 Received message from Master: op=Filter serial=42253 06:22:43 Color wheel filter change from 0 to 0 06:22:43 FLIGetFilterPos err=0 currentPosition=0 06:22:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:43 Filter is already there-color wheel unchanged 06:22:43 Received message from Master: op=Shutter serial=42254 06:22:43 Shutter LASER close 06:22:43 Received message from Camera: op=State serial=42256 06:22:43 GetSingleValue result=40 Value=cccccccc 06:22:43 SkyScan query 06:22:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:22:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:44 Parameters OK 06:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:44 Set A/D data flow result=40 06:22:44 Set A/D channel type result=40 06:22:44 Set A/D encoding result=40 06:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:44 Set channel filter=0.000000e+000 result=40 06:22:44 Config A/D Result=40 06:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:44 Get A/D filter: -9.255963e+061 result=40 06:22:44 Get A/D value=-858993460 result=40 06:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:44 Parameters OK 06:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:44 Set A/D data flow result=40 06:22:44 Set A/D channel type result=40 06:22:44 Set A/D encoding result=40 06:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:44 Set channel filter=0.000000e+000 result=40 06:22:44 Config A/D Result=40 06:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:44 Get A/D filter: -9.255963e+061 result=40 06:22:44 Get A/D value=-858993460 result=40 06:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:44 Aux= 06:22:44 Message to Camera, serial 42256 queued 06:23:21 Received message from Master: op=PointingHead serial=42269 06:23:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:23:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:23:21 Point started: ret=0 06:23:21 point_skyscan result=0 06:23:22 Check angles 06:23:22 SkyScan query 06:23:22 SkyScan query done: ret=0 az=153.27<-10218 ze=6.51<-11566 Statuses=0009 0008 06:23:22 Msec=0 True Az=153.27 Ze=6.51 Az status=0009 Ze status=0008 06:23:22 Check angles 06:23:22 SkyScan query 06:23:23 SkyScan query done: ret=0 az=135.315<-9021 ze=6.495<-11567 Statuses=0009 0008 06:23:23 Msec=750 True Az=135.315 Ze=6.495 Az status=0009 Ze status=0008 06:23:23 Check angles 06:23:23 SkyScan query 06:23:24 SkyScan query done: ret=0 az=117.72<-7848 ze=6.495<-11567 Statuses=0009 0008 06:23:24 Msec=1500 True Az=117.72 Ze=6.495 Az status=0009 Ze status=0008 06:23:24 Check angles 06:23:24 SkyScan query 06:23:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:23:24 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:23:24 Message to Master queued w/err=0: serial=42269 error=0 06:23:29 Received message from Master: op=Filter serial=42270 06:23:29 Color wheel filter change from 0 to 0 06:23:29 FLIGetFilterPos err=0 currentPosition=0 06:23:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:29 Filter is already there-color wheel unchanged 06:23:30 Received message from Master: op=Shutter serial=42271 06:23:30 Shutter LASER close 06:23:30 Received message from Camera: op=State serial=42273 06:23:30 GetSingleValue result=40 Value=cccccccc 06:23:30 SkyScan query 06:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:23:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:30 Parameters OK 06:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:30 Set A/D data flow result=40 06:23:30 Set A/D channel type result=40 06:23:30 Set A/D encoding result=40 06:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:30 Set channel filter=0.000000e+000 result=40 06:23:30 Config A/D Result=40 06:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:30 Get A/D filter: -9.255963e+061 result=40 06:23:30 Get A/D value=-858993460 result=40 06:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:30 Parameters OK 06:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:30 Set A/D data flow result=40 06:23:30 Set A/D channel type result=40 06:23:30 Set A/D encoding result=40 06:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:30 Set channel filter=0.000000e+000 result=40 06:23:30 Config A/D Result=40 06:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:30 Get A/D filter: -9.255963e+061 result=40 06:23:30 Get A/D value=-858993460 result=40 06:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:30 Aux= 06:23:30 Message to Camera, serial 42273 queued [UTC 2019-3-1 06:23:50] 06:24:07 Received message from Master: op=PointingHead serial=42286 06:24:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:24:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:24:07 Point started: ret=0 06:24:07 point_skyscan result=0 06:24:08 Check angles 06:24:08 SkyScan query 06:24:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 06:24:09 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 06:24:09 Check angles 06:24:09 SkyScan query 06:24:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 06:24:10 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 06:24:10 Check angles 06:24:10 SkyScan query 06:24:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.04<-16336 Statuses=0008 0009 06:24:10 Msec=1500 True Az=112.995 Ze=-65.04 Az status=0008 Ze status=0009 06:24:10 Check angles 06:24:10 SkyScan query 06:24:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.995<-17733 Statuses=0008 0009 06:24:11 Msec=2250 True Az=112.995 Ze=-85.995 Az status=0008 Ze status=0009 06:24:11 Check angles 06:24:11 SkyScan query 06:24:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.935<-19129 Statuses=0008 0009 06:24:12 Msec=3000 True Az=112.995 Ze=-106.935 Az status=0008 Ze status=0009 06:24:12 Check angles 06:24:12 SkyScan query 06:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.905<-20527 Statuses=0008 0009 06:24:13 Msec=3750 True Az=112.995 Ze=-127.905 Az status=0008 Ze status=0009 06:24:13 Check angles 06:24:13 SkyScan query 06:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.86<-21924 Statuses=0008 0009 06:24:13 Msec=4500 True Az=112.995 Ze=-148.86 Az status=0008 Ze status=0009 06:24:13 Check angles 06:24:13 SkyScan query 06:24:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.8<-23320 Statuses=0008 0009 06:24:14 Msec=5250 True Az=112.995 Ze=-169.8 Az status=0008 Ze status=0009 06:24:14 Check angles 06:24:14 SkyScan query 06:24:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:24:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:24:15 Message to Master queued w/err=0: serial=42286 error=0 06:24:20 Received message from Master: op=Filter serial=42287 06:24:20 Color wheel filter change from 0 to 0 06:24:20 FLIGetFilterPos err=0 currentPosition=0 06:24:20 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:20 Filter is already there-color wheel unchanged 06:24:20 Received message from Master: op=Shutter serial=42288 06:24:20 Shutter LASER open 06:24:20 Received message from Camera: op=State serial=42290 06:24:20 GetSingleValue result=40 Value=cccccccc 06:24:20 SkyScan query 06:24:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:24:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:21 Parameters OK 06:24:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:21 Set A/D data flow result=40 06:24:21 Set A/D channel type result=40 06:24:21 Set A/D encoding result=40 06:24:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:21 Set channel filter=0.000000e+000 result=40 06:24:21 Config A/D Result=40 06:24:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:21 Get A/D filter: -9.255963e+061 result=40 06:24:21 Get A/D value=-858993460 result=40 06:24:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:21 Parameters OK 06:24:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:21 Set A/D data flow result=40 06:24:21 Set A/D channel type result=40 06:24:21 Set A/D encoding result=40 06:24:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:21 Set channel filter=0.000000e+000 result=40 06:24:21 Config A/D Result=40 06:24:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:21 Get A/D filter: -9.255963e+061 result=40 06:24:21 Get A/D value=-858993460 result=40 06:24:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:21 Aux= 06:24:21 Message to Camera, serial 42290 queued 06:24:29 Received message from Master: op=Shutter serial=42300 06:24:29 Shutter LASER close 06:24:30 Received message from Master: op=PointingHead serial=42304 06:24:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:24:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:24:30 Point started: ret=0 06:24:30 point_skyscan result=0 06:24:31 Check angles 06:24:31 SkyScan query 06:24:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 06:24:31 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 06:24:32 Check angles 06:24:32 SkyScan query 06:24:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 06:24:32 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 06:24:32 Check angles 06:24:32 SkyScan query 06:24:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 06:24:33 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 06:24:33 Check angles 06:24:33 SkyScan query 06:24:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.455<-17297 Statuses=0008 0009 06:24:34 Msec=2250 True Az=112.995 Ze=-79.455 Az status=0008 Ze status=0009 06:24:34 Check angles 06:24:34 SkyScan query 06:24:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 06:24:34 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 06:24:35 Check angles 06:24:35 SkyScan query 06:24:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.575<-14505 Statuses=0008 0009 06:24:35 Msec=3750 True Az=112.995 Ze=-37.575 Az status=0008 Ze status=0009 06:24:35 Check angles 06:24:35 SkyScan query 06:24:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.155<-13077 Statuses=0008 0009 06:24:36 Msec=4500 True Az=112.995 Ze=-16.155 Az status=0008 Ze status=0009 06:24:36 Check angles 06:24:36 SkyScan query 06:24:37 SkyScan query done: ret=0 az=112.995<-7533 ze=4.965<-11669 Statuses=0008 0009 06:24:37 Msec=5250 True Az=112.995 Ze=4.965 Az status=0008 Ze status=0009 06:24:37 Check angles 06:24:37 SkyScan query 06:24:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:24:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:24:37 Message to Master queued w/err=0: serial=42304 error=0 06:24:42 Received message from Master: op=Filter serial=42305 06:24:42 Color wheel filter change from 0 to 0 06:24:42 FLIGetFilterPos err=0 currentPosition=0 06:24:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:42 Filter is already there-color wheel unchanged 06:24:43 Received message from Master: op=Shutter serial=42306 06:24:43 Shutter LASER close 06:24:43 Received message from Camera: op=State serial=42308 06:24:43 GetSingleValue result=40 Value=cccccccc 06:24:43 SkyScan query 06:24:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:24:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:43 Parameters OK 06:24:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:43 Set A/D data flow result=40 06:24:43 Set A/D channel type result=40 06:24:43 Set A/D encoding result=40 06:24:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:43 Set channel filter=0.000000e+000 result=40 06:24:43 Config A/D Result=40 06:24:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:43 Get A/D filter: -9.255963e+061 result=40 06:24:43 Get A/D value=-858993460 result=40 06:24:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:43 Parameters OK 06:24:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:43 Set A/D data flow result=40 06:24:43 Set A/D channel type result=40 06:24:43 Set A/D encoding result=40 06:24:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:43 Set channel filter=0.000000e+000 result=40 06:24:43 Config A/D Result=40 06:24:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:43 Get A/D filter: -9.255963e+061 result=40 06:24:43 Get A/D value=-858993460 result=40 06:24:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:43 Aux= 06:24:43 Message to Camera, serial 42308 queued 06:25:20 Received message from Master: op=PointingHead serial=42321 06:25:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:25:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:25:20 Point started: ret=0 06:25:20 point_skyscan result=0 06:25:21 Check angles 06:25:21 SkyScan query 06:25:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:25:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:25:22 Message to Master queued w/err=0: serial=42321 error=0 06:25:27 Received message from Master: op=Filter serial=42322 06:25:27 Color wheel filter change from 0 to 0 06:25:27 FLIGetFilterPos err=0 currentPosition=0 06:25:27 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:27 Filter is already there-color wheel unchanged 06:25:27 Received message from Master: op=Shutter serial=42323 06:25:27 Shutter LASER close 06:25:27 Received message from Camera: op=State serial=42325 06:25:27 GetSingleValue result=40 Value=cccccccc 06:25:27 SkyScan query 06:25:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:25:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:28 Parameters OK 06:25:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:28 Set A/D data flow result=40 06:25:28 Set A/D channel type result=40 06:25:28 Set A/D encoding result=40 06:25:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:28 Set channel filter=0.000000e+000 result=40 06:25:28 Config A/D Result=40 06:25:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:28 Get A/D filter: -9.255963e+061 result=40 06:25:28 Get A/D value=-858993460 result=40 06:25:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:28 Parameters OK 06:25:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:28 Set A/D data flow result=40 06:25:28 Set A/D channel type result=40 06:25:28 Set A/D encoding result=40 06:25:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:28 Set channel filter=0.000000e+000 result=40 06:25:28 Config A/D Result=40 06:25:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:28 Get A/D filter: -9.255963e+061 result=40 06:25:28 Get A/D value=-858993460 result=40 06:25:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:28 Aux= 06:25:28 Message to Camera, serial 42325 queued 06:26:04 Received message from Master: op=PointingHead serial=42338 06:26:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:26:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:26:05 Point started: ret=0 06:26:05 point_skyscan result=0 06:26:06 Check angles 06:26:06 SkyScan query 06:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:26:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:26:06 Message to Master queued w/err=0: serial=42338 error=0 06:26:11 Received message from Master: op=Filter serial=42339 06:26:11 Color wheel filter change from 0 to 0 06:26:11 FLIGetFilterPos err=0 currentPosition=0 06:26:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:11 Filter is already there-color wheel unchanged 06:26:11 Received message from Master: op=Shutter serial=42340 06:26:11 Shutter LASER close 06:26:11 Received message from Camera: op=State serial=42342 06:26:11 GetSingleValue result=40 Value=cccccccc 06:26:11 SkyScan query 06:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:26:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:12 Parameters OK 06:26:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:12 Set A/D data flow result=40 06:26:12 Set A/D channel type result=40 06:26:12 Set A/D encoding result=40 06:26:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:12 Set channel filter=0.000000e+000 result=40 06:26:12 Config A/D Result=40 06:26:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:12 Get A/D filter: -9.255963e+061 result=40 06:26:12 Get A/D value=-858993460 result=40 06:26:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:12 Parameters OK 06:26:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:12 Set A/D data flow result=40 06:26:12 Set A/D channel type result=40 06:26:12 Set A/D encoding result=40 06:26:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:12 Set channel filter=0.000000e+000 result=40 06:26:12 Config A/D Result=40 06:26:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:12 Get A/D filter: -9.255963e+061 result=40 06:26:12 Get A/D value=-858993460 result=40 06:26:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:12 Aux= 06:26:12 Message to Camera, serial 42342 queued 06:26:49 Received message from Master: op=PointingHead serial=42355 06:26:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:26:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:26:49 Point started: ret=0 06:26:49 point_skyscan result=0 06:26:50 Check angles 06:26:50 SkyScan query 06:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:26:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:26:50 Message to Master queued w/err=0: serial=42355 error=0 06:26:55 Received message from Master: op=Filter serial=42356 06:26:55 Color wheel filter change from 0 to 0 06:26:55 FLIGetFilterPos err=0 currentPosition=0 06:26:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:55 Filter is already there-color wheel unchanged 06:26:56 Received message from Master: op=Shutter serial=42357 06:26:56 Shutter LASER close 06:26:56 Received message from Camera: op=State serial=42359 06:26:56 GetSingleValue result=40 Value=cccccccc 06:26:56 SkyScan query 06:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:26:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:56 Parameters OK 06:26:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:56 Set A/D data flow result=40 06:26:56 Set A/D channel type result=40 06:26:56 Set A/D encoding result=40 06:26:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:56 Set channel filter=0.000000e+000 result=40 06:26:56 Config A/D Result=40 06:26:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:56 Get A/D filter: -9.255963e+061 result=40 06:26:56 Get A/D value=-858993460 result=40 06:26:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:56 Parameters OK 06:26:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:56 Set A/D data flow result=40 06:26:56 Set A/D channel type result=40 06:26:56 Set A/D encoding result=40 06:26:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:56 Set channel filter=0.000000e+000 result=40 06:26:56 Config A/D Result=40 06:26:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:56 Get A/D filter: -9.255963e+061 result=40 06:26:56 Get A/D value=-858993460 result=40 06:26:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:56 Aux= 06:26:56 Message to Camera, serial 42359 queued 06:27:33 Received message from Master: op=PointingHead serial=42372 06:27:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:27:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:27:33 Point started: ret=0 06:27:33 point_skyscan result=0 06:27:34 Check angles 06:27:34 SkyScan query 06:27:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 06:27:35 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 06:27:35 Check angles 06:27:35 SkyScan query 06:27:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 06:27:35 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 06:27:36 Check angles 06:27:36 SkyScan query 06:27:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 06:27:36 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 06:27:36 Check angles 06:27:36 SkyScan query 06:27:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 06:27:37 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 06:27:37 Check angles 06:27:37 SkyScan query 06:27:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.49<-19166 Statuses=0008 0009 06:27:38 Msec=3000 True Az=112.995 Ze=-107.49 Az status=0008 Ze status=0009 06:27:38 Check angles 06:27:38 SkyScan query 06:27:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.43<-20562 Statuses=0008 0009 06:27:38 Msec=3750 True Az=112.995 Ze=-128.43 Az status=0008 Ze status=0009 06:27:39 Check angles 06:27:39 SkyScan query 06:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.4<-21960 Statuses=0008 0009 06:27:39 Msec=4500 True Az=112.995 Ze=-149.4 Az status=0008 Ze status=0009 06:27:39 Check angles 06:27:39 SkyScan query 06:27:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.325<-23355 Statuses=0008 0009 06:27:40 Msec=5250 True Az=112.995 Ze=-170.325 Az status=0008 Ze status=0009 06:27:40 Check angles 06:27:40 SkyScan query 06:27:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:27:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:27:41 Message to Master queued w/err=0: serial=42372 error=0 06:27:46 Received message from Master: op=Filter serial=42373 06:27:46 Color wheel filter change from 0 to 0 06:27:46 FLIGetFilterPos err=0 currentPosition=0 06:27:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:46 Filter is already there-color wheel unchanged 06:27:46 Received message from Master: op=Shutter serial=42374 06:27:46 Shutter LASER open 06:27:46 Received message from Camera: op=State serial=42376 06:27:46 GetSingleValue result=40 Value=cccccccc 06:27:46 SkyScan query 06:27:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:27:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:47 Parameters OK 06:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:47 Set A/D data flow result=40 06:27:47 Set A/D channel type result=40 06:27:47 Set A/D encoding result=40 06:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:47 Set channel filter=0.000000e+000 result=40 06:27:47 Config A/D Result=40 06:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:47 Get A/D filter: -9.255963e+061 result=40 06:27:47 Get A/D value=-858993460 result=40 06:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:47 Parameters OK 06:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:47 Set A/D data flow result=40 06:27:47 Set A/D channel type result=40 06:27:47 Set A/D encoding result=40 06:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:47 Set channel filter=0.000000e+000 result=40 06:27:47 Config A/D Result=40 06:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:47 Get A/D filter: -9.255963e+061 result=40 06:27:47 Get A/D value=-858993460 result=40 06:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:47 Aux= 06:27:47 Message to Camera, serial 42376 queued 06:27:55 Received message from Master: op=Shutter serial=42386 06:27:55 Shutter LASER close 06:27:56 Received message from Master: op=PointingHead serial=42390 06:27:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:27:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:27:56 Point started: ret=0 06:27:56 point_skyscan result=0 06:27:57 Check angles 06:27:57 SkyScan query 06:27:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 06:27:57 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 06:27:57 Check angles 06:27:57 SkyScan query 06:27:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.37<-20158 Statuses=0008 0009 06:27:58 Msec=750 True Az=112.995 Ze=-122.37 Az status=0008 Ze status=0009 06:27:58 Check angles 06:27:58 SkyScan query 06:27:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.415<-18761 Statuses=0008 0009 06:27:59 Msec=1500 True Az=112.995 Ze=-101.415 Az status=0008 Ze status=0009 06:27:59 Check angles 06:27:59 SkyScan query 06:28:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 06:28:00 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 06:28:00 Check angles 06:28:00 SkyScan query 06:28:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 06:28:00 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 06:28:00 Check angles 06:28:00 SkyScan query 06:28:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.115<-14541 Statuses=0008 0009 06:28:01 Msec=3750 True Az=112.995 Ze=-38.115 Az status=0008 Ze status=0009 06:28:01 Check angles 06:28:01 SkyScan query 06:28:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.175<-13145 Statuses=0008 0009 06:28:02 Msec=4500 True Az=112.995 Ze=-17.175 Az status=0008 Ze status=0009 06:28:02 Check angles 06:28:02 SkyScan query 06:28:03 SkyScan query done: ret=0 az=112.995<-7533 ze=3.795<-11747 Statuses=0008 0009 06:28:03 Msec=5250 True Az=112.995 Ze=3.795 Az status=0008 Ze status=0009 06:28:03 Check angles 06:28:03 SkyScan query 06:28:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:28:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:28:03 Message to Master queued w/err=0: serial=42390 error=0 06:28:08 Received message from Master: op=Filter serial=42391 06:28:08 Color wheel filter change from 0 to 0 06:28:08 FLIGetFilterPos err=0 currentPosition=0 06:28:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:08 Filter is already there-color wheel unchanged 06:28:08 Received message from Master: op=Shutter serial=42392 06:28:08 Shutter LASER close 06:28:09 Received message from Camera: op=State serial=42394 06:28:09 GetSingleValue result=40 Value=cccccccc 06:28:09 SkyScan query 06:28:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:09 Parameters OK 06:28:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:09 Set A/D data flow result=40 06:28:09 Set A/D channel type result=40 06:28:09 Set A/D encoding result=40 06:28:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:09 Set channel filter=0.000000e+000 result=40 06:28:09 Config A/D Result=40 06:28:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:09 Get A/D filter: -9.255963e+061 result=40 06:28:09 Get A/D value=-858993460 result=40 06:28:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:09 Parameters OK 06:28:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:09 Set A/D data flow result=40 06:28:09 Set A/D channel type result=40 06:28:09 Set A/D encoding result=40 06:28:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:09 Set channel filter=0.000000e+000 result=40 06:28:09 Config A/D Result=40 06:28:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:09 Get A/D filter: -9.255963e+061 result=40 06:28:09 Get A/D value=-858993460 result=40 06:28:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:09 Aux= 06:28:09 Message to Camera, serial 42394 queued 06:28:46 Received message from Master: op=PointingHead serial=42407 06:28:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:28:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:28:46 Point started: ret=0 06:28:46 point_skyscan result=0 06:28:47 Check angles 06:28:47 SkyScan query 06:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:28:48 Message to Master queued w/err=0: serial=42407 error=0 06:28:53 Received message from Master: op=Filter serial=42408 06:28:53 Color wheel filter change from 0 to 0 06:28:53 FLIGetFilterPos err=0 currentPosition=0 06:28:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:53 Filter is already there-color wheel unchanged 06:28:53 Received message from Master: op=Shutter serial=42409 06:28:53 Shutter LASER close 06:28:53 Received message from Camera: op=State serial=42411 06:28:53 GetSingleValue result=40 Value=cccccccc 06:28:53 SkyScan query 06:28:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:54 Parameters OK 06:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:54 Set A/D data flow result=40 06:28:54 Set A/D channel type result=40 06:28:54 Set A/D encoding result=40 06:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:54 Set channel filter=0.000000e+000 result=40 06:28:54 Config A/D Result=40 06:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:54 Get A/D filter: -9.255963e+061 result=40 06:28:54 Get A/D value=-858993460 result=40 06:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:54 Parameters OK 06:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:54 Set A/D data flow result=40 06:28:54 Set A/D channel type result=40 06:28:54 Set A/D encoding result=40 06:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:54 Set channel filter=0.000000e+000 result=40 06:28:54 Config A/D Result=40 06:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:54 Get A/D filter: -9.255963e+061 result=40 06:28:54 Get A/D value=-858993460 result=40 06:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:54 Aux= 06:28:54 Message to Camera, serial 42411 queued 06:29:30 Received message from Master: op=PointingHead serial=42424 06:29:30 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:29:30 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:29:31 Point started: ret=0 06:29:31 point_skyscan result=0 06:29:32 Check angles 06:29:32 SkyScan query 06:29:32 SkyScan query done: ret=0 az=135.675<-9045 ze=-6.51<-12434 Statuses=0009 0008 06:29:32 Msec=0 True Az=135.675 Ze=-6.51 Az status=0009 Ze status=0008 06:29:32 Check angles 06:29:32 SkyScan query 06:29:33 SkyScan query done: ret=0 az=153.21<-10214 ze=-6.495<-12433 Statuses=0009 0008 06:29:33 Msec=750 True Az=153.21 Ze=-6.495 Az status=0009 Ze status=0008 06:29:33 Check angles 06:29:33 SkyScan query 06:29:34 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 06:29:34 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 06:29:34 Check angles 06:29:34 SkyScan query 06:29:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:29:34 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:29:34 Message to Master queued w/err=0: serial=42424 error=0 06:29:39 Received message from Master: op=Filter serial=42425 06:29:39 Color wheel filter change from 0 to 0 06:29:39 FLIGetFilterPos err=0 currentPosition=0 06:29:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:29:39 Filter is already there-color wheel unchanged 06:29:40 Received message from Master: op=Shutter serial=42426 06:29:40 Shutter LASER close 06:29:40 Received message from Camera: op=State serial=42428 06:29:40 GetSingleValue result=40 Value=cccccccc 06:29:40 SkyScan query 06:29:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:29:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:40 Parameters OK 06:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:40 Set A/D data flow result=40 06:29:40 Set A/D channel type result=40 06:29:40 Set A/D encoding result=40 06:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:40 Set channel filter=0.000000e+000 result=40 06:29:40 Config A/D Result=40 06:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:40 Get A/D filter: -9.255963e+061 result=40 06:29:40 Get A/D value=-858993460 result=40 06:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:40 Parameters OK 06:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:40 Set A/D data flow result=40 06:29:40 Set A/D channel type result=40 06:29:40 Set A/D encoding result=40 06:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:40 Set channel filter=0.000000e+000 result=40 06:29:40 Config A/D Result=40 06:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:40 Get A/D filter: -9.255963e+061 result=40 06:29:40 Get A/D value=-858993460 result=40 06:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:29:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:29:40 Aux= 06:29:40 Message to Camera, serial 42428 queued 06:30:17 Received message from Master: op=PointingHead serial=42441 06:30:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:30:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:30:17 Point started: ret=0 06:30:17 point_skyscan result=0 06:30:18 Check angles 06:30:18 SkyScan query 06:30:19 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 06:30:19 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 06:30:19 Check angles 06:30:19 SkyScan query 06:30:19 SkyScan query done: ret=0 az=135.42<-9028 ze=6.495<-11567 Statuses=0009 0008 06:30:19 Msec=750 True Az=135.42 Ze=6.495 Az status=0009 Ze status=0008 06:30:20 Check angles 06:30:20 SkyScan query 06:30:20 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 06:30:20 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 06:30:20 Check angles 06:30:20 SkyScan query 06:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:30:21 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:30:21 Message to Master queued w/err=0: serial=42441 error=0 06:30:26 Received message from Master: op=Filter serial=42442 06:30:26 Color wheel filter change from 0 to 0 06:30:26 FLIGetFilterPos err=0 currentPosition=0 06:30:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:26 Filter is already there-color wheel unchanged 06:30:26 Received message from Master: op=Shutter serial=42443 06:30:26 Shutter LASER close 06:30:26 Received message from Camera: op=State serial=42445 06:30:26 GetSingleValue result=40 Value=cccccccc 06:30:26 SkyScan query 06:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:30:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:27 Parameters OK 06:30:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:27 Set A/D data flow result=40 06:30:27 Set A/D channel type result=40 06:30:27 Set A/D encoding result=40 06:30:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:27 Set channel filter=0.000000e+000 result=40 06:30:27 Config A/D Result=40 06:30:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:27 Get A/D filter: -9.255963e+061 result=40 06:30:27 Get A/D value=-858993460 result=40 06:30:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:27 Parameters OK 06:30:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:27 Set A/D data flow result=40 06:30:27 Set A/D channel type result=40 06:30:27 Set A/D encoding result=40 06:30:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:27 Set channel filter=0.000000e+000 result=40 06:30:27 Config A/D Result=40 06:30:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:27 Get A/D filter: -9.255963e+061 result=40 06:30:27 Get A/D value=-858993460 result=40 06:30:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:27 Aux= 06:30:27 Message to Camera, serial 42445 queued 06:31:04 Received message from Master: op=PointingHead serial=42458 06:31:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:31:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:31:04 Point started: ret=0 06:31:04 point_skyscan result=0 06:31:05 Check angles 06:31:05 SkyScan query 06:31:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 06:31:05 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 06:31:05 Check angles 06:31:05 SkyScan query 06:31:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 06:31:06 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 06:31:06 Check angles 06:31:06 SkyScan query 06:31:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.955<-16397 Statuses=0008 0009 06:31:07 Msec=1500 True Az=112.995 Ze=-65.955 Az status=0008 Ze status=0009 06:31:07 Check angles 06:31:07 SkyScan query 06:31:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.955<-17797 Statuses=0008 0009 06:31:07 Msec=2250 True Az=112.995 Ze=-86.955 Az status=0008 Ze status=0009 06:31:08 Check angles 06:31:08 SkyScan query 06:31:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.285<-19219 Statuses=0008 0009 06:31:08 Msec=3000 True Az=112.995 Ze=-108.285 Az status=0008 Ze status=0009 06:31:08 Check angles 06:31:08 SkyScan query 06:31:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.675<-20645 Statuses=0008 0009 06:31:09 Msec=3750 True Az=112.995 Ze=-129.675 Az status=0008 Ze status=0009 06:31:09 Check angles 06:31:09 SkyScan query 06:31:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.05<-22070 Statuses=0008 0009 06:31:10 Msec=4500 True Az=112.995 Ze=-151.05 Az status=0008 Ze status=0009 06:31:10 Check angles 06:31:10 SkyScan query 06:31:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.66<-23444 Statuses=0008 0009 06:31:11 Msec=5250 True Az=112.995 Ze=-171.66 Az status=0008 Ze status=0009 06:31:11 Check angles 06:31:11 SkyScan query 06:31:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:31:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:31:11 Message to Master queued w/err=0: serial=42458 error=0 06:31:16 Received message from Master: op=Filter serial=42459 06:31:16 Color wheel filter change from 0 to 0 06:31:16 FLIGetFilterPos err=0 currentPosition=0 06:31:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:16 Filter is already there-color wheel unchanged 06:31:16 Received message from Master: op=Shutter serial=42460 06:31:16 Shutter LASER open 06:31:17 Received message from Camera: op=State serial=42462 06:31:17 GetSingleValue result=40 Value=cccccccc 06:31:17 SkyScan query 06:31:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:31:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:17 Parameters OK 06:31:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:17 Set A/D data flow result=40 06:31:17 Set A/D channel type result=40 06:31:17 Set A/D encoding result=40 06:31:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:17 Set channel filter=0.000000e+000 result=40 06:31:17 Config A/D Result=40 06:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:17 Get A/D filter: -9.255963e+061 result=40 06:31:17 Get A/D value=-858993460 result=40 06:31:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:17 Parameters OK 06:31:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:17 Set A/D data flow result=40 06:31:17 Set A/D channel type result=40 06:31:17 Set A/D encoding result=40 06:31:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:17 Set channel filter=0.000000e+000 result=40 06:31:17 Config A/D Result=40 06:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:17 Get A/D filter: -9.255963e+061 result=40 06:31:17 Get A/D value=-858993460 result=40 06:31:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:17 Aux= 06:31:17 Message to Camera, serial 42462 queued 06:31:26 Received message from Master: op=Shutter serial=42472 06:31:26 Shutter LASER close 06:31:26 Received message from Master: op=PointingHead serial=42476 06:31:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:31:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:31:26 Point started: ret=0 06:31:26 point_skyscan result=0 06:31:27 Check angles 06:31:27 SkyScan query 06:31:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 06:31:28 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 06:31:28 Check angles 06:31:28 SkyScan query 06:31:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.725<-20115 Statuses=0008 0009 06:31:28 Msec=750 True Az=112.995 Ze=-121.725 Az status=0008 Ze status=0009 06:31:29 Check angles 06:31:29 SkyScan query 06:31:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.41<-18694 Statuses=0008 0009 06:31:29 Msec=1500 True Az=112.995 Ze=-100.41 Az status=0008 Ze status=0009 06:31:29 Check angles 06:31:29 SkyScan query 06:31:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 06:31:30 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 06:31:30 Check angles 06:31:30 SkyScan query 06:31:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 06:31:31 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 06:31:31 Check angles 06:31:31 SkyScan query 06:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.11<-14474 Statuses=0008 0009 06:31:32 Msec=3750 True Az=112.995 Ze=-37.11 Az status=0008 Ze status=0009 06:31:32 Check angles 06:31:32 SkyScan query 06:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.69<-13046 Statuses=0008 0009 06:31:32 Msec=4500 True Az=112.995 Ze=-15.69 Az status=0008 Ze status=0009 06:31:32 Check angles 06:31:32 SkyScan query 06:31:33 SkyScan query done: ret=0 az=112.995<-7533 ze=4.98<-11668 Statuses=0008 0009 06:31:33 Msec=5250 True Az=112.995 Ze=4.98 Az status=0008 Ze status=0009 06:31:33 Check angles 06:31:33 SkyScan query 06:31:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:31:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:31:34 Message to Master queued w/err=0: serial=42476 error=0 06:31:39 Received message from Master: op=Filter serial=42477 06:31:39 Color wheel filter change from 0 to 0 06:31:39 FLIGetFilterPos err=0 currentPosition=0 06:31:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:39 Filter is already there-color wheel unchanged 06:31:39 Received message from Master: op=Shutter serial=42478 06:31:39 Shutter LASER close 06:31:39 Received message from Camera: op=State serial=42480 06:31:39 GetSingleValue result=40 Value=cccccccc 06:31:39 SkyScan query 06:31:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:31:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:40 Parameters OK 06:31:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:40 Set A/D data flow result=40 06:31:40 Set A/D channel type result=40 06:31:40 Set A/D encoding result=40 06:31:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:40 Set channel filter=0.000000e+000 result=40 06:31:40 Config A/D Result=40 06:31:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:40 Get A/D filter: -9.255963e+061 result=40 06:31:40 Get A/D value=-858993460 result=40 06:31:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:40 Parameters OK 06:31:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:40 Set A/D data flow result=40 06:31:40 Set A/D channel type result=40 06:31:40 Set A/D encoding result=40 06:31:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:40 Set channel filter=0.000000e+000 result=40 06:31:40 Config A/D Result=40 06:31:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:40 Get A/D filter: -9.255963e+061 result=40 06:31:40 Get A/D value=-858993460 result=40 06:31:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:40 Aux= 06:31:40 Message to Camera, serial 42480 queued 06:32:17 Received message from Master: op=PointingHead serial=42493 06:32:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:32:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:32:17 Point started: ret=0 06:32:17 point_skyscan result=0 06:32:18 Check angles 06:32:18 SkyScan query 06:32:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:32:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:32:18 Message to Master queued w/err=0: serial=42493 error=0 06:32:23 Received message from Master: op=Filter serial=42494 06:32:23 Color wheel filter change from 0 to 0 06:32:23 FLIGetFilterPos err=0 currentPosition=0 06:32:23 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:23 Filter is already there-color wheel unchanged 06:32:23 Received message from Master: op=Shutter serial=42495 06:32:23 Shutter LASER close 06:32:23 Received message from Camera: op=State serial=42497 06:32:23 GetSingleValue result=40 Value=cccccccc 06:32:23 SkyScan query 06:32:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:32:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:24 Parameters OK 06:32:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:24 Set A/D data flow result=40 06:32:24 Set A/D channel type result=40 06:32:24 Set A/D encoding result=40 06:32:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:24 Set channel filter=0.000000e+000 result=40 06:32:24 Config A/D Result=40 06:32:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:24 Get A/D filter: -9.255963e+061 result=40 06:32:24 Get A/D value=-858993460 result=40 06:32:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:24 Parameters OK 06:32:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:24 Set A/D data flow result=40 06:32:24 Set A/D channel type result=40 06:32:24 Set A/D encoding result=40 06:32:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:24 Set channel filter=0.000000e+000 result=40 06:32:24 Config A/D Result=40 06:32:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:24 Get A/D filter: -9.255963e+061 result=40 06:32:24 Get A/D value=-858993460 result=40 06:32:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:24 Aux= 06:32:24 Message to Camera, serial 42497 queued 06:33:01 Received message from Master: op=PointingHead serial=42510 06:33:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:33:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:33:01 Point started: ret=0 06:33:01 point_skyscan result=0 06:33:02 Check angles 06:33:02 SkyScan query 06:33:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:33:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:33:02 Message to Master queued w/err=0: serial=42510 error=0 06:33:07 Received message from Master: op=Filter serial=42511 06:33:07 Color wheel filter change from 0 to 0 06:33:07 FLIGetFilterPos err=0 currentPosition=0 06:33:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:07 Filter is already there-color wheel unchanged 06:33:08 Received message from Master: op=Shutter serial=42512 06:33:08 Shutter LASER close 06:33:08 Received message from Camera: op=State serial=42514 06:33:08 GetSingleValue result=40 Value=cccccccc 06:33:08 SkyScan query 06:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:33:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:08 Parameters OK 06:33:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:08 Set A/D data flow result=40 06:33:08 Set A/D channel type result=40 06:33:08 Set A/D encoding result=40 06:33:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:08 Set channel filter=0.000000e+000 result=40 06:33:08 Config A/D Result=40 06:33:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:08 Get A/D filter: -9.255963e+061 result=40 06:33:08 Get A/D value=-858993460 result=40 06:33:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:08 Parameters OK 06:33:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:08 Set A/D data flow result=40 06:33:08 Set A/D channel type result=40 06:33:08 Set A/D encoding result=40 06:33:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:08 Set channel filter=0.000000e+000 result=40 06:33:08 Config A/D Result=40 06:33:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:08 Get A/D filter: -9.255963e+061 result=40 06:33:08 Get A/D value=-858993460 result=40 06:33:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:08 Aux= 06:33:08 Message to Camera, serial 42514 queued 06:33:38 Received message from Master: op=Identify serial=42516 06:33:45 Received message from Master: op=PointingHead serial=42530 06:33:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:33:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:33:46 Point started: ret=0 06:33:46 point_skyscan result=0 06:33:46 Check angles 06:33:46 SkyScan query 06:33:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:33:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:33:47 Message to Master queued w/err=0: serial=42530 error=0 06:33:52 Received message from Master: op=Filter serial=42531 06:33:52 Color wheel filter change from 0 to 0 06:33:52 FLIGetFilterPos err=0 currentPosition=0 06:33:52 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:52 Filter is already there-color wheel unchanged 06:33:52 Received message from Master: op=Shutter serial=42532 06:33:52 Shutter LASER close 06:33:52 Received message from Camera: op=State serial=42534 06:33:52 GetSingleValue result=40 Value=cccccccc 06:33:52 SkyScan query 06:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:33:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:53 Parameters OK 06:33:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:53 Set A/D data flow result=40 06:33:53 Set A/D channel type result=40 06:33:53 Set A/D encoding result=40 06:33:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:53 Set channel filter=0.000000e+000 result=40 06:33:53 Config A/D Result=40 06:33:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:53 Get A/D filter: -9.255963e+061 result=40 06:33:53 Get A/D value=-858993460 result=40 06:33:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:53 Parameters OK 06:33:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:53 Set A/D data flow result=40 06:33:53 Set A/D channel type result=40 06:33:53 Set A/D encoding result=40 06:33:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:53 Set channel filter=0.000000e+000 result=40 06:33:53 Config A/D Result=40 06:33:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:53 Get A/D filter: -9.255963e+061 result=40 06:33:53 Get A/D value=-858993460 result=40 06:33:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:53 Aux= 06:33:53 Message to Camera, serial 42534 queued 06:34:29 Received message from Master: op=PointingHead serial=42547 06:34:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:34:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:34:30 Point started: ret=0 06:34:30 point_skyscan result=0 06:34:31 Check angles 06:34:31 SkyScan query 06:34:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.745<-13583 Statuses=0008 0009 06:34:31 Msec=0 True Az=112.995 Ze=-23.745 Az status=0008 Ze status=0009 06:34:31 Check angles 06:34:31 SkyScan query [UTC 2019-3-1 06:34:32] 06:34:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.15<-15010 Statuses=0008 0009 06:34:32 Msec=750 True Az=112.995 Ze=-45.15 Az status=0008 Ze status=0009 06:34:32 Check angles 06:34:32 SkyScan query 06:34:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.09<-16406 Statuses=0008 0009 06:34:33 Msec=1500 True Az=112.995 Ze=-66.09 Az status=0008 Ze status=0009 06:34:33 Check angles 06:34:33 SkyScan query 06:34:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 06:34:33 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 06:34:34 Check angles 06:34:34 SkyScan query 06:34:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.42<-19228 Statuses=0008 0009 06:34:34 Msec=3000 True Az=112.995 Ze=-108.42 Az status=0008 Ze status=0009 06:34:34 Check angles 06:34:34 SkyScan query 06:34:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.39<-20626 Statuses=0008 0009 06:34:35 Msec=3750 True Az=112.995 Ze=-129.39 Az status=0008 Ze status=0009 06:34:35 Check angles 06:34:35 SkyScan query 06:34:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.33<-22022 Statuses=0008 0009 06:34:36 Msec=4500 True Az=112.995 Ze=-150.33 Az status=0008 Ze status=0009 06:34:36 Check angles 06:34:36 SkyScan query 06:34:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0008 0009 06:34:36 Msec=5250 True Az=112.995 Ze=-171.45 Az status=0008 Ze status=0009 06:34:37 Check angles 06:34:37 SkyScan query 06:34:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:34:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:34:37 Message to Master queued w/err=0: serial=42547 error=0 06:34:42 Received message from Master: op=Filter serial=42548 06:34:42 Color wheel filter change from 0 to 0 06:34:42 FLIGetFilterPos err=0 currentPosition=0 06:34:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:42 Filter is already there-color wheel unchanged 06:34:42 Received message from Master: op=Shutter serial=42549 06:34:42 Shutter LASER open 06:34:43 Received message from Camera: op=State serial=42551 06:34:43 GetSingleValue result=40 Value=cccccccc 06:34:43 SkyScan query 06:34:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:34:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:43 Parameters OK 06:34:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:43 Set A/D data flow result=40 06:34:43 Set A/D channel type result=40 06:34:43 Set A/D encoding result=40 06:34:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:43 Set channel filter=0.000000e+000 result=40 06:34:43 Config A/D Result=40 06:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:43 Get A/D filter: -9.255963e+061 result=40 06:34:43 Get A/D value=-858993460 result=40 06:34:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:43 Parameters OK 06:34:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:43 Set A/D data flow result=40 06:34:43 Set A/D channel type result=40 06:34:43 Set A/D encoding result=40 06:34:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:43 Set channel filter=0.000000e+000 result=40 06:34:43 Config A/D Result=40 06:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:43 Get A/D filter: -9.255963e+061 result=40 06:34:43 Get A/D value=-858993460 result=40 06:34:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:43 Aux= 06:34:43 Message to Camera, serial 42551 queued 06:34:52 Received message from Master: op=Shutter serial=42561 06:34:52 Shutter LASER close 06:34:52 Received message from Master: op=PointingHead serial=42565 06:34:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:34:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:34:53 Point started: ret=0 06:34:53 point_skyscan result=0 06:34:53 Check angles 06:34:53 SkyScan query 06:34:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 06:34:54 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 06:34:54 Check angles 06:34:54 SkyScan query 06:34:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.425<-20095 Statuses=0008 0009 06:34:55 Msec=750 True Az=112.995 Ze=-121.425 Az status=0008 Ze status=0009 06:34:55 Check angles 06:34:55 SkyScan query 06:34:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 06:34:55 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 06:34:56 Check angles 06:34:56 SkyScan query 06:34:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.5<-17300 Statuses=0008 0009 06:34:56 Msec=2250 True Az=112.995 Ze=-79.5 Az status=0008 Ze status=0009 06:34:56 Check angles 06:34:56 SkyScan query 06:34:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.545<-15903 Statuses=0008 0009 06:34:57 Msec=3000 True Az=112.995 Ze=-58.545 Az status=0008 Ze status=0009 06:34:57 Check angles 06:34:57 SkyScan query 06:34:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 06:34:58 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 06:34:58 Check angles 06:34:58 SkyScan query 06:34:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 06:34:58 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 06:34:59 Check angles 06:34:59 SkyScan query 06:34:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.275<-11715 Statuses=0008 0009 06:34:59 Msec=5250 True Az=112.995 Ze=4.275 Az status=0008 Ze status=0009 06:34:59 Check angles 06:34:59 SkyScan query 06:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:35:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:35:00 Message to Master queued w/err=0: serial=42565 error=0 06:35:05 Received message from Master: op=Filter serial=42566 06:35:05 Color wheel filter change from 0 to 0 06:35:05 FLIGetFilterPos err=0 currentPosition=0 06:35:05 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:05 Filter is already there-color wheel unchanged 06:35:05 Received message from Master: op=Shutter serial=42567 06:35:05 Shutter LASER close 06:35:05 Received message from Camera: op=State serial=42569 06:35:05 GetSingleValue result=40 Value=cccccccc 06:35:05 SkyScan query 06:35:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:35:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:06 Parameters OK 06:35:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:06 Set A/D data flow result=40 06:35:06 Set A/D channel type result=40 06:35:06 Set A/D encoding result=40 06:35:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:06 Set channel filter=0.000000e+000 result=40 06:35:06 Config A/D Result=40 06:35:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:06 Get A/D filter: -9.255963e+061 result=40 06:35:06 Get A/D value=-858993460 result=40 06:35:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:06 Parameters OK 06:35:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:06 Set A/D data flow result=40 06:35:06 Set A/D channel type result=40 06:35:06 Set A/D encoding result=40 06:35:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:06 Set channel filter=0.000000e+000 result=40 06:35:06 Config A/D Result=40 06:35:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:06 Get A/D filter: -9.255963e+061 result=40 06:35:06 Get A/D value=-858993460 result=40 06:35:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:06 Aux= 06:35:06 Message to Camera, serial 42569 queued 06:35:43 Received message from Master: op=PointingHead serial=42582 06:35:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:35:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:35:43 Point started: ret=0 06:35:43 point_skyscan result=0 06:35:44 Check angles 06:35:44 SkyScan query 06:35:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:35:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:35:44 Message to Master queued w/err=0: serial=42582 error=0 06:35:49 Received message from Master: op=Filter serial=42583 06:35:49 Color wheel filter change from 0 to 0 06:35:49 FLIGetFilterPos err=0 currentPosition=0 06:35:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:49 Filter is already there-color wheel unchanged 06:35:50 Received message from Master: op=Shutter serial=42584 06:35:50 Shutter LASER close 06:35:50 Received message from Camera: op=State serial=42586 06:35:50 GetSingleValue result=40 Value=cccccccc 06:35:50 SkyScan query 06:35:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:35:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:50 Parameters OK 06:35:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:50 Set A/D data flow result=40 06:35:50 Set A/D channel type result=40 06:35:50 Set A/D encoding result=40 06:35:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:50 Set channel filter=0.000000e+000 result=40 06:35:50 Config A/D Result=40 06:35:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:50 Get A/D filter: -9.255963e+061 result=40 06:35:50 Get A/D value=-858993460 result=40 06:35:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:50 Parameters OK 06:35:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:50 Set A/D data flow result=40 06:35:50 Set A/D channel type result=40 06:35:50 Set A/D encoding result=40 06:35:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:50 Set channel filter=0.000000e+000 result=40 06:35:50 Config A/D Result=40 06:35:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:50 Get A/D filter: -9.255963e+061 result=40 06:35:50 Get A/D value=-858993460 result=40 06:35:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:50 Aux= 06:35:50 Message to Camera, serial 42586 queued 06:36:27 Received message from Master: op=PointingHead serial=42599 06:36:27 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:36:27 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:36:27 Point started: ret=0 06:36:27 point_skyscan result=0 06:36:28 Check angles 06:36:28 SkyScan query 06:36:29 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 06:36:29 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 06:36:29 Check angles 06:36:29 SkyScan query 06:36:29 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 06:36:29 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 06:36:30 Check angles 06:36:30 SkyScan query 06:36:30 SkyScan query done: ret=0 az=171.09<-11406 ze=-6.495<-12433 Statuses=0009 0008 06:36:30 Msec=1500 True Az=171.09 Ze=-6.495 Az status=0009 Ze status=0008 06:36:30 Check angles 06:36:30 SkyScan query 06:36:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:36:31 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:36:31 Message to Master queued w/err=0: serial=42599 error=0 06:36:36 Received message from Master: op=Filter serial=42600 06:36:36 Color wheel filter change from 0 to 0 06:36:36 FLIGetFilterPos err=0 currentPosition=0 06:36:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:36 Filter is already there-color wheel unchanged 06:36:36 Received message from Master: op=Shutter serial=42601 06:36:36 Shutter LASER close 06:36:36 Received message from Camera: op=State serial=42603 06:36:36 GetSingleValue result=40 Value=cccccccc 06:36:36 SkyScan query 06:36:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:36:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:37 Parameters OK 06:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:37 Set A/D data flow result=40 06:36:37 Set A/D channel type result=40 06:36:37 Set A/D encoding result=40 06:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:37 Set channel filter=0.000000e+000 result=40 06:36:37 Config A/D Result=40 06:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:37 Get A/D filter: -9.255963e+061 result=40 06:36:37 Get A/D value=-858993460 result=40 06:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:37 Parameters OK 06:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:37 Set A/D data flow result=40 06:36:37 Set A/D channel type result=40 06:36:37 Set A/D encoding result=40 06:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:37 Set channel filter=0.000000e+000 result=40 06:36:37 Config A/D Result=40 06:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:37 Get A/D filter: -9.255963e+061 result=40 06:36:37 Get A/D value=-858993460 result=40 06:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:37 Aux= 06:36:37 Message to Camera, serial 42603 queued 06:37:14 Received message from Master: op=PointingHead serial=42616 06:37:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:37:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:37:14 Point started: ret=0 06:37:14 point_skyscan result=0 06:37:15 Check angles 06:37:15 SkyScan query 06:37:15 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 06:37:15 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 06:37:15 Check angles 06:37:15 SkyScan query 06:37:16 SkyScan query done: ret=0 az=135.12<-9008 ze=6.495<-11567 Statuses=0009 0008 06:37:16 Msec=750 True Az=135.12 Ze=6.495 Az status=0009 Ze status=0008 06:37:16 Check angles 06:37:16 SkyScan query 06:37:17 SkyScan query done: ret=0 az=117.135<-7809 ze=6.495<-11567 Statuses=0009 0008 06:37:17 Msec=1500 True Az=117.135 Ze=6.495 Az status=0009 Ze status=0008 06:37:17 Check angles 06:37:17 SkyScan query 06:37:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:37:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:37:17 Message to Master queued w/err=0: serial=42616 error=0 06:37:22 Received message from Master: op=Filter serial=42617 06:37:22 Color wheel filter change from 0 to 0 06:37:22 FLIGetFilterPos err=0 currentPosition=0 06:37:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:22 Filter is already there-color wheel unchanged 06:37:23 Received message from Master: op=Shutter serial=42618 06:37:23 Shutter LASER close 06:37:23 Received message from Camera: op=State serial=42620 06:37:23 GetSingleValue result=40 Value=cccccccc 06:37:23 SkyScan query 06:37:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:37:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:23 Parameters OK 06:37:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:23 Set A/D data flow result=40 06:37:23 Set A/D channel type result=40 06:37:23 Set A/D encoding result=40 06:37:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:23 Set channel filter=0.000000e+000 result=40 06:37:23 Config A/D Result=40 06:37:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:23 Get A/D filter: -9.255963e+061 result=40 06:37:23 Get A/D value=-858993460 result=40 06:37:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:23 Parameters OK 06:37:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:23 Set A/D data flow result=40 06:37:23 Set A/D channel type result=40 06:37:23 Set A/D encoding result=40 06:37:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:23 Set channel filter=0.000000e+000 result=40 06:37:23 Config A/D Result=40 06:37:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:23 Get A/D filter: -9.255963e+061 result=40 06:37:23 Get A/D value=-858993460 result=40 06:37:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:23 Aux= 06:37:23 Message to Camera, serial 42620 queued 06:38:00 Received message from Master: op=PointingHead serial=42633 06:38:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:38:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:38:00 Point started: ret=0 06:38:00 point_skyscan result=0 06:38:01 Check angles 06:38:01 SkyScan query 06:38:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 06:38:02 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 06:38:02 Check angles 06:38:02 SkyScan query 06:38:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.895<-14993 Statuses=0008 0009 06:38:03 Msec=750 True Az=112.995 Ze=-44.895 Az status=0008 Ze status=0009 06:38:03 Check angles 06:38:03 SkyScan query 06:38:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 06:38:03 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 06:38:03 Check angles 06:38:03 SkyScan query 06:38:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.79<-17786 Statuses=0008 0009 06:38:04 Msec=2250 True Az=112.995 Ze=-86.79 Az status=0008 Ze status=0009 06:38:04 Check angles 06:38:04 SkyScan query 06:38:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.745<-19183 Statuses=0008 0009 06:38:05 Msec=3000 True Az=112.995 Ze=-107.745 Az status=0008 Ze status=0009 06:38:05 Check angles 06:38:05 SkyScan query 06:38:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 06:38:06 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 06:38:06 Check angles 06:38:06 SkyScan query 06:38:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.655<-21977 Statuses=0008 0009 06:38:06 Msec=4500 True Az=112.995 Ze=-149.655 Az status=0008 Ze status=0009 06:38:06 Check angles 06:38:06 SkyScan query 06:38:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.58<-23372 Statuses=0008 0009 06:38:07 Msec=5250 True Az=112.995 Ze=-170.58 Az status=0008 Ze status=0009 06:38:07 Check angles 06:38:07 SkyScan query 06:38:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:38:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:38:08 Message to Master queued w/err=0: serial=42633 error=0 06:38:13 Received message from Master: op=Filter serial=42634 06:38:13 Color wheel filter change from 0 to 0 06:38:13 FLIGetFilterPos err=0 currentPosition=0 06:38:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:13 Filter is already there-color wheel unchanged 06:38:13 Received message from Master: op=Shutter serial=42635 06:38:13 Shutter LASER open 06:38:13 Received message from Camera: op=State serial=42637 06:38:13 GetSingleValue result=40 Value=cccccccc 06:38:13 SkyScan query 06:38:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:38:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:14 Parameters OK 06:38:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:14 Set A/D data flow result=40 06:38:14 Set A/D channel type result=40 06:38:14 Set A/D encoding result=40 06:38:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:14 Set channel filter=0.000000e+000 result=40 06:38:14 Config A/D Result=40 06:38:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:14 Get A/D filter: -9.255963e+061 result=40 06:38:14 Get A/D value=-858993460 result=40 06:38:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:14 Parameters OK 06:38:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:14 Set A/D data flow result=40 06:38:14 Set A/D channel type result=40 06:38:14 Set A/D encoding result=40 06:38:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:14 Set channel filter=0.000000e+000 result=40 06:38:14 Config A/D Result=40 06:38:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:14 Get A/D filter: -9.255963e+061 result=40 06:38:14 Get A/D value=-858993460 result=40 06:38:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:14 Aux= 06:38:14 Message to Camera, serial 42637 queued 06:38:22 Received message from Master: op=Shutter serial=42647 06:38:22 Shutter LASER close 06:38:23 Received message from Master: op=PointingHead serial=42651 06:38:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:38:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:38:23 Point started: ret=0 06:38:23 point_skyscan result=0 06:38:24 Check angles 06:38:24 SkyScan query 06:38:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 06:38:24 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 06:38:24 Check angles 06:38:24 SkyScan query 06:38:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 06:38:25 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 06:38:25 Check angles 06:38:25 SkyScan query 06:38:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.475<-18765 Statuses=0008 0009 06:38:26 Msec=1500 True Az=112.995 Ze=-101.475 Az status=0008 Ze status=0009 06:38:26 Check angles 06:38:26 SkyScan query 06:38:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 06:38:27 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 06:38:27 Check angles 06:38:27 SkyScan query 06:38:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 06:38:27 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 06:38:27 Check angles 06:38:27 SkyScan query 06:38:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 06:38:28 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 06:38:28 Check angles 06:38:28 SkyScan query 06:38:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.205<-13147 Statuses=0008 0009 06:38:29 Msec=4500 True Az=112.995 Ze=-17.205 Az status=0008 Ze status=0009 06:38:29 Check angles 06:38:29 SkyScan query 06:38:30 SkyScan query done: ret=0 az=112.995<-7533 ze=3.765<-11749 Statuses=0008 0009 06:38:30 Msec=5250 True Az=112.995 Ze=3.765 Az status=0008 Ze status=0009 06:38:30 Check angles 06:38:30 SkyScan query 06:38:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:38:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:38:30 Message to Master queued w/err=0: serial=42651 error=0 06:38:35 Received message from Master: op=Filter serial=42652 06:38:35 Color wheel filter change from 0 to 0 06:38:35 FLIGetFilterPos err=0 currentPosition=0 06:38:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:35 Filter is already there-color wheel unchanged 06:38:35 Received message from Master: op=Shutter serial=42653 06:38:35 Shutter LASER close 06:38:36 Received message from Camera: op=State serial=42655 06:38:36 GetSingleValue result=40 Value=cccccccc 06:38:36 SkyScan query 06:38:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:38:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:36 Parameters OK 06:38:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:36 Set A/D data flow result=40 06:38:36 Set A/D channel type result=40 06:38:36 Set A/D encoding result=40 06:38:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:36 Set channel filter=0.000000e+000 result=40 06:38:36 Config A/D Result=40 06:38:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:36 Get A/D filter: -9.255963e+061 result=40 06:38:36 Get A/D value=-858993460 result=40 06:38:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:36 Parameters OK 06:38:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:36 Set A/D data flow result=40 06:38:36 Set A/D channel type result=40 06:38:36 Set A/D encoding result=40 06:38:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:36 Set channel filter=0.000000e+000 result=40 06:38:36 Config A/D Result=40 06:38:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:36 Get A/D filter: -9.255963e+061 result=40 06:38:36 Get A/D value=-858993460 result=40 06:38:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:36 Aux= 06:38:36 Message to Camera, serial 42655 queued 06:39:13 Received message from Master: op=PointingHead serial=42668 06:39:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:39:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:39:13 Point started: ret=0 06:39:13 point_skyscan result=0 06:39:14 Check angles 06:39:14 SkyScan query 06:39:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:39:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:39:15 Message to Master queued w/err=0: serial=42668 error=0 06:39:20 Received message from Master: op=Filter serial=42669 06:39:20 Color wheel filter change from 0 to 0 06:39:20 FLIGetFilterPos err=0 currentPosition=0 06:39:20 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:20 Filter is already there-color wheel unchanged 06:39:20 Received message from Master: op=Shutter serial=42670 06:39:20 Shutter LASER close 06:39:20 Received message from Camera: op=State serial=42672 06:39:20 GetSingleValue result=40 Value=cccccccc 06:39:20 SkyScan query 06:39:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:39:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:20 Parameters OK 06:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:20 Set A/D data flow result=40 06:39:20 Set A/D channel type result=40 06:39:20 Set A/D encoding result=40 06:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:20 Set channel filter=0.000000e+000 result=40 06:39:20 Config A/D Result=40 06:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:20 Get A/D filter: -9.255963e+061 result=40 06:39:20 Get A/D value=-858993460 result=40 06:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:20 Parameters OK 06:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:20 Set A/D data flow result=40 06:39:20 Set A/D channel type result=40 06:39:20 Set A/D encoding result=40 06:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:20 Set channel filter=0.000000e+000 result=40 06:39:20 Config A/D Result=40 06:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:20 Get A/D filter: -9.255963e+061 result=40 06:39:20 Get A/D value=-858993460 result=40 06:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:20 Aux= 06:39:20 Message to Camera, serial 42672 queued 06:39:57 Received message from Master: op=PointingHead serial=42685 06:39:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:39:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:39:58 Point started: ret=0 06:39:58 point_skyscan result=0 06:39:58 Check angles 06:39:58 SkyScan query 06:39:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:39:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:39:59 Message to Master queued w/err=0: serial=42685 error=0 06:40:04 Received message from Master: op=Filter serial=42686 06:40:04 Color wheel filter change from 0 to 0 06:40:04 FLIGetFilterPos err=0 currentPosition=0 06:40:04 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:04 Filter is already there-color wheel unchanged 06:40:04 Received message from Master: op=Shutter serial=42687 06:40:04 Shutter LASER close 06:40:04 Received message from Camera: op=State serial=42689 06:40:04 GetSingleValue result=40 Value=cccccccc 06:40:04 SkyScan query 06:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:40:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:05 Parameters OK 06:40:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:05 Set A/D data flow result=40 06:40:05 Set A/D channel type result=40 06:40:05 Set A/D encoding result=40 06:40:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:05 Set channel filter=0.000000e+000 result=40 06:40:05 Config A/D Result=40 06:40:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:05 Get A/D filter: -9.255963e+061 result=40 06:40:05 Get A/D value=-858993460 result=40 06:40:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:05 Parameters OK 06:40:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:05 Set A/D data flow result=40 06:40:05 Set A/D channel type result=40 06:40:05 Set A/D encoding result=40 06:40:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:05 Set channel filter=0.000000e+000 result=40 06:40:05 Config A/D Result=40 06:40:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:05 Get A/D filter: -9.255963e+061 result=40 06:40:05 Get A/D value=-858993460 result=40 06:40:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:05 Aux= 06:40:05 Message to Camera, serial 42689 queued 06:40:42 Received message from Master: op=PointingHead serial=42702 06:40:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:40:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:40:42 Point started: ret=0 06:40:42 point_skyscan result=0 06:40:43 Check angles 06:40:43 SkyScan query 06:40:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:40:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:40:43 Message to Master queued w/err=0: serial=42702 error=0 06:40:48 Received message from Master: op=Filter serial=42703 06:40:48 Color wheel filter change from 0 to 0 06:40:48 FLIGetFilterPos err=0 currentPosition=0 06:40:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:48 Filter is already there-color wheel unchanged 06:40:48 Received message from Master: op=Shutter serial=42704 06:40:48 Shutter LASER close 06:40:49 Received message from Camera: op=State serial=42706 06:40:49 GetSingleValue result=40 Value=cccccccc 06:40:49 SkyScan query 06:40:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:40:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:49 Parameters OK 06:40:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:49 Set A/D data flow result=40 06:40:49 Set A/D channel type result=40 06:40:49 Set A/D encoding result=40 06:40:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:49 Set channel filter=0.000000e+000 result=40 06:40:49 Config A/D Result=40 06:40:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:49 Get A/D filter: -9.255963e+061 result=40 06:40:49 Get A/D value=-858993460 result=40 06:40:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:49 Parameters OK 06:40:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:49 Set A/D data flow result=40 06:40:49 Set A/D channel type result=40 06:40:49 Set A/D encoding result=40 06:40:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:49 Set channel filter=0.000000e+000 result=40 06:40:49 Config A/D Result=40 06:40:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:49 Get A/D filter: -9.255963e+061 result=40 06:40:49 Get A/D value=-858993460 result=40 06:40:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:49 Aux= 06:40:49 Message to Camera, serial 42706 queued 06:41:26 Received message from Master: op=PointingHead serial=42719 06:41:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:41:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:41:26 Point started: ret=0 06:41:26 point_skyscan result=0 06:41:27 Check angles 06:41:27 SkyScan query 06:41:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 06:41:28 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 06:41:28 Check angles 06:41:28 SkyScan query 06:41:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.235<-14949 Statuses=0008 0009 06:41:28 Msec=750 True Az=112.995 Ze=-44.235 Az status=0008 Ze status=0009 06:41:29 Check angles 06:41:29 SkyScan query 06:41:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 06:41:29 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 06:41:29 Check angles 06:41:29 SkyScan query 06:41:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.595<-17773 Statuses=0008 0009 06:41:30 Msec=2250 True Az=112.995 Ze=-86.595 Az status=0008 Ze status=0009 06:41:30 Check angles 06:41:30 SkyScan query 06:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.535<-19169 Statuses=0008 0009 06:41:31 Msec=3000 True Az=112.995 Ze=-107.535 Az status=0008 Ze status=0009 06:41:31 Check angles 06:41:31 SkyScan query 06:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.895<-20593 Statuses=0008 0009 06:41:31 Msec=3750 True Az=112.995 Ze=-128.895 Az status=0008 Ze status=0009 06:41:32 Check angles 06:41:32 SkyScan query 06:41:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.865<-21991 Statuses=0008 0009 06:41:32 Msec=4500 True Az=112.995 Ze=-149.865 Az status=0008 Ze status=0009 06:41:32 Check angles 06:41:32 SkyScan query 06:41:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.745<-23383 Statuses=0008 0009 06:41:33 Msec=5250 True Az=112.995 Ze=-170.745 Az status=0008 Ze status=0009 06:41:33 Check angles 06:41:33 SkyScan query 06:41:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:41:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:41:34 Message to Master queued w/err=0: serial=42719 error=0 06:41:39 Received message from Master: op=Filter serial=42720 06:41:39 Color wheel filter change from 0 to 0 06:41:39 FLIGetFilterPos err=0 currentPosition=0 06:41:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:39 Filter is already there-color wheel unchanged 06:41:39 Received message from Master: op=Shutter serial=42721 06:41:39 Shutter LASER open 06:41:39 Received message from Camera: op=State serial=42723 06:41:39 GetSingleValue result=40 Value=cccccccc 06:41:39 SkyScan query 06:41:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:41:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:40 Parameters OK 06:41:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:40 Set A/D data flow result=40 06:41:40 Set A/D channel type result=40 06:41:40 Set A/D encoding result=40 06:41:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:40 Set channel filter=0.000000e+000 result=40 06:41:40 Config A/D Result=40 06:41:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:40 Get A/D filter: -9.255963e+061 result=40 06:41:40 Get A/D value=-858993460 result=40 06:41:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:40 Parameters OK 06:41:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:40 Set A/D data flow result=40 06:41:40 Set A/D channel type result=40 06:41:40 Set A/D encoding result=40 06:41:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:40 Set channel filter=0.000000e+000 result=40 06:41:40 Config A/D Result=40 06:41:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:40 Get A/D filter: -9.255963e+061 result=40 06:41:40 Get A/D value=-858993460 result=40 06:41:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:40 Aux= 06:41:40 Message to Camera, serial 42723 queued 06:41:48 Received message from Master: op=Shutter serial=42733 06:41:48 Shutter LASER close 06:41:49 Received message from Master: op=PointingHead serial=42737 06:41:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:41:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:41:49 Point started: ret=0 06:41:49 point_skyscan result=0 06:41:50 Check angles 06:41:50 SkyScan query 06:41:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 06:41:50 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 06:41:50 Check angles 06:41:50 SkyScan query 06:41:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 06:41:51 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 06:41:51 Check angles 06:41:51 SkyScan query 06:41:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 06:41:52 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 06:41:52 Check angles 06:41:52 SkyScan query 06:41:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 06:41:53 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 06:41:53 Check angles 06:41:53 SkyScan query 06:41:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 06:41:53 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 06:41:53 Check angles 06:41:53 SkyScan query 06:41:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 06:41:54 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 06:41:54 Check angles 06:41:54 SkyScan query 06:41:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 06:41:55 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 06:41:55 Check angles 06:41:55 SkyScan query 06:41:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 06:41:56 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 06:41:56 Check angles 06:41:56 SkyScan query 06:41:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:41:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:41:56 Message to Master queued w/err=0: serial=42737 error=0 06:42:01 Received message from Master: op=Filter serial=42738 06:42:01 Color wheel filter change from 0 to 0 06:42:01 FLIGetFilterPos err=0 currentPosition=0 06:42:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:01 Filter is already there-color wheel unchanged 06:42:01 Received message from Master: op=Shutter serial=42739 06:42:01 Shutter LASER close 06:42:02 Received message from Camera: op=State serial=42741 06:42:02 GetSingleValue result=40 Value=cccccccc 06:42:02 SkyScan query 06:42:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:42:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:02 Parameters OK 06:42:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:02 Set A/D data flow result=40 06:42:02 Set A/D channel type result=40 06:42:02 Set A/D encoding result=40 06:42:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:02 Set channel filter=0.000000e+000 result=40 06:42:02 Config A/D Result=40 06:42:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:02 Get A/D filter: -9.255963e+061 result=40 06:42:02 Get A/D value=-858993460 result=40 06:42:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:02 Parameters OK 06:42:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:02 Set A/D data flow result=40 06:42:02 Set A/D channel type result=40 06:42:02 Set A/D encoding result=40 06:42:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:02 Set channel filter=0.000000e+000 result=40 06:42:02 Config A/D Result=40 06:42:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:02 Get A/D filter: -9.255963e+061 result=40 06:42:02 Get A/D value=-858993460 result=40 06:42:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:02 Aux= 06:42:02 Message to Camera, serial 42741 queued 06:42:39 Received message from Master: op=PointingHead serial=42754 06:42:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:42:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:42:39 Point started: ret=0 06:42:39 point_skyscan result=0 06:42:40 Check angles 06:42:40 SkyScan query 06:42:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:42:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:42:41 Message to Master queued w/err=0: serial=42754 error=0 06:42:46 Received message from Master: op=Filter serial=42755 06:42:46 Color wheel filter change from 0 to 0 06:42:46 FLIGetFilterPos err=0 currentPosition=0 06:42:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:46 Filter is already there-color wheel unchanged 06:42:46 Received message from Master: op=Shutter serial=42756 06:42:46 Shutter LASER close 06:42:46 Received message from Camera: op=State serial=42758 06:42:46 GetSingleValue result=40 Value=cccccccc 06:42:46 SkyScan query 06:42:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:42:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:47 Parameters OK 06:42:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:47 Set A/D data flow result=40 06:42:47 Set A/D channel type result=40 06:42:47 Set A/D encoding result=40 06:42:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:47 Set channel filter=0.000000e+000 result=40 06:42:47 Config A/D Result=40 06:42:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:47 Get A/D filter: -9.255963e+061 result=40 06:42:47 Get A/D value=-858993460 result=40 06:42:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:47 Parameters OK 06:42:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:47 Set A/D data flow result=40 06:42:47 Set A/D channel type result=40 06:42:47 Set A/D encoding result=40 06:42:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:47 Set channel filter=0.000000e+000 result=40 06:42:47 Config A/D Result=40 06:42:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:47 Get A/D filter: -9.255963e+061 result=40 06:42:47 Get A/D value=-858993460 result=40 06:42:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:47 Aux= 06:42:47 Message to Camera, serial 42758 queued 06:43:23 Received message from Master: op=PointingHead serial=42771 06:43:23 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:43:23 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:43:24 Point started: ret=0 06:43:24 point_skyscan result=0 06:43:25 Check angles 06:43:25 SkyScan query 06:43:25 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 06:43:25 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 06:43:25 Check angles 06:43:25 SkyScan query 06:43:26 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 06:43:26 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 06:43:26 Check angles 06:43:26 SkyScan query 06:43:27 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 06:43:27 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 06:43:27 Check angles 06:43:27 SkyScan query 06:43:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:43:27 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:43:27 Message to Master queued w/err=0: serial=42771 error=0 06:43:32 Received message from Master: op=Filter serial=42772 06:43:32 Color wheel filter change from 0 to 0 06:43:32 FLIGetFilterPos err=0 currentPosition=0 06:43:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:32 Filter is already there-color wheel unchanged 06:43:33 Received message from Master: op=Shutter serial=42773 06:43:33 Shutter LASER close 06:43:33 Received message from Camera: op=State serial=42775 06:43:33 GetSingleValue result=40 Value=cccccccc 06:43:33 SkyScan query 06:43:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:43:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:33 Parameters OK 06:43:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:33 Set A/D data flow result=40 06:43:33 Set A/D channel type result=40 06:43:33 Set A/D encoding result=40 06:43:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:33 Set channel filter=0.000000e+000 result=40 06:43:33 Config A/D Result=40 06:43:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:33 Get A/D filter: -9.255963e+061 result=40 06:43:33 Get A/D value=-858993460 result=40 06:43:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:33 Parameters OK 06:43:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:33 Set A/D data flow result=40 06:43:33 Set A/D channel type result=40 06:43:33 Set A/D encoding result=40 06:43:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:33 Set channel filter=0.000000e+000 result=40 06:43:33 Config A/D Result=40 06:43:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:33 Get A/D filter: -9.255963e+061 result=40 06:43:33 Get A/D value=-858993460 result=40 06:43:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:33 Aux= 06:43:33 Message to Camera, serial 42775 queued [UTC 2019-3-1 06:43:50] 06:44:10 Received message from Master: op=PointingHead serial=42788 06:44:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:44:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:44:10 Point started: ret=0 06:44:10 point_skyscan result=0 06:44:11 Check angles 06:44:11 SkyScan query 06:44:12 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 06:44:12 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 06:44:12 Check angles 06:44:12 SkyScan query 06:44:12 SkyScan query done: ret=0 az=135.12<-9008 ze=6.495<-11567 Statuses=0009 0008 06:44:12 Msec=750 True Az=135.12 Ze=6.495 Az status=0009 Ze status=0008 06:44:13 Check angles 06:44:13 SkyScan query 06:44:13 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 06:44:13 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 06:44:13 Check angles 06:44:13 SkyScan query 06:44:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:44:14 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:44:14 Message to Master queued w/err=0: serial=42788 error=0 06:44:19 Received message from Master: op=Filter serial=42789 06:44:19 Color wheel filter change from 0 to 0 06:44:19 FLIGetFilterPos err=0 currentPosition=0 06:44:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:19 Filter is already there-color wheel unchanged 06:44:19 Received message from Master: op=Shutter serial=42790 06:44:19 Shutter LASER close 06:44:19 Received message from Camera: op=State serial=42792 06:44:19 GetSingleValue result=40 Value=cccccccc 06:44:19 SkyScan query 06:44:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:44:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:20 Parameters OK 06:44:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:20 Set A/D data flow result=40 06:44:20 Set A/D channel type result=40 06:44:20 Set A/D encoding result=40 06:44:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:20 Set channel filter=0.000000e+000 result=40 06:44:20 Config A/D Result=40 06:44:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:20 Get A/D filter: -9.255963e+061 result=40 06:44:20 Get A/D value=-858993460 result=40 06:44:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:20 Parameters OK 06:44:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:20 Set A/D data flow result=40 06:44:20 Set A/D channel type result=40 06:44:20 Set A/D encoding result=40 06:44:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:20 Set channel filter=0.000000e+000 result=40 06:44:20 Config A/D Result=40 06:44:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:20 Get A/D filter: -9.255963e+061 result=40 06:44:20 Get A/D value=-858993460 result=40 06:44:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:20 Aux= 06:44:20 Message to Camera, serial 42792 queued 06:44:57 Received message from Master: op=PointingHead serial=42805 06:44:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:44:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:44:57 Point started: ret=0 06:44:57 point_skyscan result=0 06:44:58 Check angles 06:44:58 SkyScan query 06:44:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 06:44:58 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 06:44:58 Check angles 06:44:58 SkyScan query 06:44:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.98<-14932 Statuses=0008 0009 06:44:59 Msec=750 True Az=112.995 Ze=-43.98 Az status=0008 Ze status=0009 06:44:59 Check angles 06:44:59 SkyScan query 06:45:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 06:45:00 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 06:45:00 Check angles 06:45:00 SkyScan query 06:45:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.76<-17784 Statuses=0008 0009 06:45:00 Msec=2250 True Az=112.995 Ze=-86.76 Az status=0008 Ze status=0009 06:45:01 Check angles 06:45:01 SkyScan query 06:45:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.7<-19180 Statuses=0008 0009 06:45:01 Msec=3000 True Az=112.995 Ze=-107.7 Az status=0008 Ze status=0009 06:45:01 Check angles 06:45:01 SkyScan query 06:45:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 06:45:02 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 06:45:02 Check angles 06:45:02 SkyScan query 06:45:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.61<-21974 Statuses=0008 0009 06:45:03 Msec=4500 True Az=112.995 Ze=-149.61 Az status=0008 Ze status=0009 06:45:03 Check angles 06:45:03 SkyScan query 06:45:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 06:45:03 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 06:45:04 Check angles 06:45:04 SkyScan query 06:45:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:45:04 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:45:04 Message to Master queued w/err=0: serial=42805 error=0 06:45:09 Received message from Master: op=Filter serial=42806 06:45:09 Color wheel filter change from 0 to 0 06:45:09 FLIGetFilterPos err=0 currentPosition=0 06:45:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:09 Filter is already there-color wheel unchanged 06:45:09 Received message from Master: op=Shutter serial=42807 06:45:09 Shutter LASER open 06:45:10 Received message from Camera: op=State serial=42809 06:45:10 GetSingleValue result=40 Value=cccccccc 06:45:10 SkyScan query 06:45:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:45:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:10 Parameters OK 06:45:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:10 Set A/D data flow result=40 06:45:10 Set A/D channel type result=40 06:45:10 Set A/D encoding result=40 06:45:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:10 Set channel filter=0.000000e+000 result=40 06:45:10 Config A/D Result=40 06:45:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:10 Get A/D filter: -9.255963e+061 result=40 06:45:10 Get A/D value=-858993460 result=40 06:45:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:10 Parameters OK 06:45:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:10 Set A/D data flow result=40 06:45:10 Set A/D channel type result=40 06:45:10 Set A/D encoding result=40 06:45:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:10 Set channel filter=0.000000e+000 result=40 06:45:10 Config A/D Result=40 06:45:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:10 Get A/D filter: -9.255963e+061 result=40 06:45:10 Get A/D value=-858993460 result=40 06:45:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:10 Aux= 06:45:10 Message to Camera, serial 42809 queued 06:45:19 Received message from Master: op=Shutter serial=42819 06:45:19 Shutter LASER close 06:45:19 Received message from Master: op=PointingHead serial=42823 06:45:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:45:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:45:19 Point started: ret=0 06:45:19 point_skyscan result=0 06:45:20 Check angles 06:45:20 SkyScan query 06:45:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 06:45:21 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 06:45:21 Check angles 06:45:21 SkyScan query 06:45:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 06:45:21 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 06:45:22 Check angles 06:45:22 SkyScan query 06:45:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 06:45:22 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 06:45:22 Check angles 06:45:22 SkyScan query 06:45:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.34<-17356 Statuses=0008 0009 06:45:23 Msec=2250 True Az=112.995 Ze=-80.34 Az status=0008 Ze status=0009 06:45:23 Check angles 06:45:23 SkyScan query 06:45:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.385<-15959 Statuses=0008 0009 06:45:24 Msec=3000 True Az=112.995 Ze=-59.385 Az status=0008 Ze status=0009 06:45:24 Check angles 06:45:24 SkyScan query 06:45:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.415<-14561 Statuses=0008 0009 06:45:24 Msec=3750 True Az=112.995 Ze=-38.415 Az status=0008 Ze status=0009 06:45:25 Check angles 06:45:25 SkyScan query 06:45:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.46<-13164 Statuses=0008 0009 06:45:25 Msec=4500 True Az=112.995 Ze=-17.46 Az status=0008 Ze status=0009 06:45:25 Check angles 06:45:25 SkyScan query 06:45:26 SkyScan query done: ret=0 az=112.995<-7533 ze=3.495<-11767 Statuses=0008 0009 06:45:26 Msec=5250 True Az=112.995 Ze=3.495 Az status=0008 Ze status=0009 06:45:26 Check angles 06:45:26 SkyScan query 06:45:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:45:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:45:27 Message to Master queued w/err=0: serial=42823 error=0 06:45:32 Received message from Master: op=Filter serial=42824 06:45:32 Color wheel filter change from 0 to 0 06:45:32 FLIGetFilterPos err=0 currentPosition=0 06:45:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:32 Filter is already there-color wheel unchanged 06:45:32 Received message from Master: op=Shutter serial=42825 06:45:32 Shutter LASER close 06:45:32 Received message from Camera: op=State serial=42827 06:45:32 GetSingleValue result=40 Value=cccccccc 06:45:32 SkyScan query 06:45:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:45:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:33 Parameters OK 06:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:33 Set A/D data flow result=40 06:45:33 Set A/D channel type result=40 06:45:33 Set A/D encoding result=40 06:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:33 Set channel filter=0.000000e+000 result=40 06:45:33 Config A/D Result=40 06:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:33 Get A/D filter: -9.255963e+061 result=40 06:45:33 Get A/D value=-858993460 result=40 06:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:33 Parameters OK 06:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:33 Set A/D data flow result=40 06:45:33 Set A/D channel type result=40 06:45:33 Set A/D encoding result=40 06:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:33 Set channel filter=0.000000e+000 result=40 06:45:33 Config A/D Result=40 06:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:33 Get A/D filter: -9.255963e+061 result=40 06:45:33 Get A/D value=-858993460 result=40 06:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:33 Aux= 06:45:33 Message to Camera, serial 42827 queued 06:46:09 Received message from Master: op=PointingHead serial=42840 06:46:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:46:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:46:10 Point started: ret=0 06:46:10 point_skyscan result=0 06:46:11 Check angles 06:46:11 SkyScan query 06:46:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:46:11 Message to Master queued w/err=0: serial=42840 error=0 06:46:16 Received message from Master: op=Filter serial=42841 06:46:16 Color wheel filter change from 0 to 0 06:46:16 FLIGetFilterPos err=0 currentPosition=0 06:46:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:16 Filter is already there-color wheel unchanged 06:46:16 Received message from Master: op=Shutter serial=42842 06:46:16 Shutter LASER close 06:46:16 Received message from Camera: op=State serial=42844 06:46:16 GetSingleValue result=40 Value=cccccccc 06:46:16 SkyScan query 06:46:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:17 Parameters OK 06:46:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:17 Set A/D data flow result=40 06:46:17 Set A/D channel type result=40 06:46:17 Set A/D encoding result=40 06:46:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:17 Set channel filter=0.000000e+000 result=40 06:46:17 Config A/D Result=40 06:46:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:17 Get A/D filter: -9.255963e+061 result=40 06:46:17 Get A/D value=-858993460 result=40 06:46:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:17 Parameters OK 06:46:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:17 Set A/D data flow result=40 06:46:17 Set A/D channel type result=40 06:46:17 Set A/D encoding result=40 06:46:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:17 Set channel filter=0.000000e+000 result=40 06:46:17 Config A/D Result=40 06:46:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:17 Get A/D filter: -9.255963e+061 result=40 06:46:17 Get A/D value=-858993460 result=40 06:46:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:17 Aux= 06:46:17 Message to Camera, serial 42844 queued 06:46:54 Received message from Master: op=PointingHead serial=42857 06:46:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:46:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:46:54 Point started: ret=0 06:46:54 point_skyscan result=0 06:46:55 Check angles 06:46:55 SkyScan query 06:46:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:46:55 Message to Master queued w/err=0: serial=42857 error=0 06:47:00 Received message from Master: op=Filter serial=42858 06:47:00 Color wheel filter change from 0 to 0 06:47:00 FLIGetFilterPos err=0 currentPosition=0 06:47:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:00 Filter is already there-color wheel unchanged 06:47:01 Received message from Master: op=Shutter serial=42859 06:47:01 Shutter LASER close 06:47:01 Received message from Camera: op=State serial=42861 06:47:01 GetSingleValue result=40 Value=cccccccc 06:47:01 SkyScan query 06:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:47:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:01 Parameters OK 06:47:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:01 Set A/D data flow result=40 06:47:01 Set A/D channel type result=40 06:47:01 Set A/D encoding result=40 06:47:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:01 Set channel filter=0.000000e+000 result=40 06:47:01 Config A/D Result=40 06:47:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:01 Get A/D filter: -9.255963e+061 result=40 06:47:01 Get A/D value=-858993460 result=40 06:47:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:01 Parameters OK 06:47:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:01 Set A/D data flow result=40 06:47:01 Set A/D channel type result=40 06:47:01 Set A/D encoding result=40 06:47:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:01 Set channel filter=0.000000e+000 result=40 06:47:01 Config A/D Result=40 06:47:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:01 Get A/D filter: -9.255963e+061 result=40 06:47:01 Get A/D value=-858993460 result=40 06:47:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:01 Aux= 06:47:01 Message to Camera, serial 42861 queued 06:47:38 Received message from Master: op=PointingHead serial=42874 06:47:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:47:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:47:38 Point started: ret=0 06:47:38 point_skyscan result=0 06:47:39 Check angles 06:47:39 SkyScan query 06:47:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:47:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:47:40 Message to Master queued w/err=0: serial=42874 error=0 06:47:45 Received message from Master: op=Filter serial=42875 06:47:45 Color wheel filter change from 0 to 0 06:47:45 FLIGetFilterPos err=0 currentPosition=0 06:47:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:45 Filter is already there-color wheel unchanged 06:47:45 Received message from Master: op=Shutter serial=42876 06:47:45 Shutter LASER close 06:47:45 Received message from Camera: op=State serial=42878 06:47:45 GetSingleValue result=40 Value=cccccccc 06:47:45 SkyScan query 06:47:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:47:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:46 Parameters OK 06:47:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:46 Set A/D data flow result=40 06:47:46 Set A/D channel type result=40 06:47:46 Set A/D encoding result=40 06:47:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:46 Set channel filter=0.000000e+000 result=40 06:47:46 Config A/D Result=40 06:47:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:46 Get A/D filter: -9.255963e+061 result=40 06:47:46 Get A/D value=-858993460 result=40 06:47:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:46 Parameters OK 06:47:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:46 Set A/D data flow result=40 06:47:46 Set A/D channel type result=40 06:47:46 Set A/D encoding result=40 06:47:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:46 Set channel filter=0.000000e+000 result=40 06:47:46 Config A/D Result=40 06:47:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:46 Get A/D filter: -9.255963e+061 result=40 06:47:46 Get A/D value=-858993460 result=40 06:47:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:46 Aux= 06:47:46 Message to Camera, serial 42878 queued 06:48:22 Received message from Master: op=PointingHead serial=42891 06:48:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:48:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:48:23 Point started: ret=0 06:48:23 point_skyscan result=0 06:48:24 Check angles 06:48:24 SkyScan query 06:48:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 06:48:24 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 06:48:24 Check angles 06:48:24 SkyScan query 06:48:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.165<-15011 Statuses=0008 0009 06:48:25 Msec=750 True Az=112.995 Ze=-45.165 Az status=0008 Ze status=0009 06:48:25 Check angles 06:48:25 SkyScan query 06:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.105<-16407 Statuses=0008 0009 06:48:26 Msec=1500 True Az=112.995 Ze=-66.105 Az status=0008 Ze status=0009 06:48:26 Check angles 06:48:26 SkyScan query 06:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.06<-17804 Statuses=0008 0009 06:48:26 Msec=2250 True Az=112.995 Ze=-87.06 Az status=0008 Ze status=0009 06:48:27 Check angles 06:48:27 SkyScan query 06:48:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.435<-19229 Statuses=0008 0009 06:48:27 Msec=3000 True Az=112.995 Ze=-108.435 Az status=0008 Ze status=0009 06:48:27 Check angles 06:48:27 SkyScan query 06:48:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.84<-20656 Statuses=0008 0009 06:48:28 Msec=3750 True Az=112.995 Ze=-129.84 Az status=0008 Ze status=0009 06:48:28 Check angles 06:48:28 SkyScan query 06:48:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.765<-22051 Statuses=0008 0009 06:48:29 Msec=4500 True Az=112.995 Ze=-150.765 Az status=0008 Ze status=0009 06:48:29 Check angles 06:48:29 SkyScan query 06:48:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0008 0009 06:48:29 Msec=5250 True Az=112.995 Ze=-171.465 Az status=0008 Ze status=0009 06:48:30 Check angles 06:48:30 SkyScan query 06:48:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:48:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:48:30 Message to Master queued w/err=0: serial=42891 error=0 06:48:35 Received message from Master: op=Filter serial=42892 06:48:35 Color wheel filter change from 0 to 0 06:48:35 FLIGetFilterPos err=0 currentPosition=0 06:48:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:35 Filter is already there-color wheel unchanged 06:48:35 Received message from Master: op=Shutter serial=42893 06:48:35 Shutter LASER open 06:48:36 Received message from Camera: op=State serial=42895 06:48:36 GetSingleValue result=40 Value=cccccccc 06:48:36 SkyScan query 06:48:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:48:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:36 Parameters OK 06:48:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:36 Set A/D data flow result=40 06:48:36 Set A/D channel type result=40 06:48:36 Set A/D encoding result=40 06:48:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:36 Set channel filter=0.000000e+000 result=40 06:48:36 Config A/D Result=40 06:48:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:36 Get A/D filter: -9.255963e+061 result=40 06:48:36 Get A/D value=-858993460 result=40 06:48:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:36 Parameters OK 06:48:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:36 Set A/D data flow result=40 06:48:36 Set A/D channel type result=40 06:48:36 Set A/D encoding result=40 06:48:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:36 Set channel filter=0.000000e+000 result=40 06:48:36 Config A/D Result=40 06:48:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:36 Get A/D filter: -9.255963e+061 result=40 06:48:36 Get A/D value=-858993460 result=40 06:48:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:36 Aux= 06:48:36 Message to Camera, serial 42895 queued 06:48:45 Received message from Master: op=Shutter serial=42905 06:48:45 Shutter LASER close 06:48:45 Received message from Master: op=PointingHead serial=42909 06:48:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:48:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:48:45 Point started: ret=0 06:48:45 point_skyscan result=0 06:48:46 Check angles 06:48:46 SkyScan query 06:48:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 06:48:47 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 06:48:47 Check angles 06:48:47 SkyScan query 06:48:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 06:48:48 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 06:48:48 Check angles 06:48:48 SkyScan query 06:48:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.995<-18733 Statuses=0008 0009 06:48:48 Msec=1500 True Az=112.995 Ze=-100.995 Az status=0008 Ze status=0009 06:48:48 Check angles 06:48:48 SkyScan query 06:48:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 06:48:49 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 06:48:49 Check angles 06:48:49 SkyScan query 06:48:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 06:48:50 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 06:48:50 Check angles 06:48:50 SkyScan query 06:48:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.115<-14541 Statuses=0008 0009 06:48:51 Msec=3750 True Az=112.995 Ze=-38.115 Az status=0008 Ze status=0009 06:48:51 Check angles 06:48:51 SkyScan query 06:48:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.175<-13145 Statuses=0008 0009 06:48:51 Msec=4500 True Az=112.995 Ze=-17.175 Az status=0008 Ze status=0009 06:48:51 Check angles 06:48:51 SkyScan query 06:48:52 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 06:48:52 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 06:48:52 Check angles 06:48:52 SkyScan query 06:48:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:48:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:48:53 Message to Master queued w/err=0: serial=42909 error=0 06:48:58 Received message from Master: op=Filter serial=42910 06:48:58 Color wheel filter change from 0 to 0 06:48:58 FLIGetFilterPos err=0 currentPosition=0 06:48:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:58 Filter is already there-color wheel unchanged 06:48:58 Received message from Master: op=Shutter serial=42911 06:48:58 Shutter LASER close 06:48:58 Received message from Camera: op=State serial=42913 06:48:58 GetSingleValue result=40 Value=cccccccc 06:48:58 SkyScan query 06:48:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:48:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:59 Parameters OK 06:48:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:59 Set A/D data flow result=40 06:48:59 Set A/D channel type result=40 06:48:59 Set A/D encoding result=40 06:48:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:59 Set channel filter=0.000000e+000 result=40 06:48:59 Config A/D Result=40 06:48:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:59 Get A/D filter: -9.255963e+061 result=40 06:48:59 Get A/D value=-858993460 result=40 06:48:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:59 Parameters OK 06:48:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:59 Set A/D data flow result=40 06:48:59 Set A/D channel type result=40 06:48:59 Set A/D encoding result=40 06:48:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:59 Set channel filter=0.000000e+000 result=40 06:48:59 Config A/D Result=40 06:48:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:59 Get A/D filter: -9.255963e+061 result=40 06:48:59 Get A/D value=-858993460 result=40 06:48:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:59 Aux= 06:48:59 Message to Camera, serial 42913 queued 06:49:36 Received message from Master: op=PointingHead serial=42926 06:49:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:49:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:49:36 Point started: ret=0 06:49:36 point_skyscan result=0 06:49:37 Check angles 06:49:37 SkyScan query 06:49:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:49:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:49:37 Message to Master queued w/err=0: serial=42926 error=0 06:49:42 Received message from Master: op=Filter serial=42927 06:49:42 Color wheel filter change from 0 to 0 06:49:42 FLIGetFilterPos err=0 currentPosition=0 06:49:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:49:42 Filter is already there-color wheel unchanged 06:49:42 Received message from Master: op=Shutter serial=42928 06:49:42 Shutter LASER close 06:49:42 Received message from Camera: op=State serial=42930 06:49:42 GetSingleValue result=40 Value=cccccccc 06:49:42 SkyScan query 06:49:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:49:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:43 Parameters OK 06:49:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:43 Set A/D data flow result=40 06:49:43 Set A/D channel type result=40 06:49:43 Set A/D encoding result=40 06:49:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:43 Set channel filter=0.000000e+000 result=40 06:49:43 Config A/D Result=40 06:49:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:43 Get A/D filter: -9.255963e+061 result=40 06:49:43 Get A/D value=-858993460 result=40 06:49:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:43 Parameters OK 06:49:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:43 Set A/D data flow result=40 06:49:43 Set A/D channel type result=40 06:49:43 Set A/D encoding result=40 06:49:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:43 Set channel filter=0.000000e+000 result=40 06:49:43 Config A/D Result=40 06:49:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:43 Get A/D filter: -9.255963e+061 result=40 06:49:43 Get A/D value=-858993460 result=40 06:49:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:43 Aux= 06:49:43 Message to Camera, serial 42930 queued 06:50:20 Received message from Master: op=PointingHead serial=42943 06:50:20 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:50:20 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:50:20 Point started: ret=0 06:50:20 point_skyscan result=0 06:50:21 Check angles 06:50:21 SkyScan query 06:50:21 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 06:50:21 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 06:50:22 Check angles 06:50:22 SkyScan query 06:50:22 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.495<-12433 Statuses=0009 0008 06:50:22 Msec=750 True Az=153.735 Ze=-6.495 Az status=0009 Ze status=0008 06:50:22 Check angles 06:50:22 SkyScan query 06:50:23 SkyScan query done: ret=0 az=171.57<-11438 ze=-6.495<-12433 Statuses=0009 0008 06:50:23 Msec=1500 True Az=171.57 Ze=-6.495 Az status=0009 Ze status=0008 06:50:23 Check angles 06:50:23 SkyScan query 06:50:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:50:24 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:50:24 Message to Master queued w/err=0: serial=42943 error=0 06:50:29 Received message from Master: op=Filter serial=42944 06:50:29 Color wheel filter change from 0 to 0 06:50:29 FLIGetFilterPos err=0 currentPosition=0 06:50:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:29 Filter is already there-color wheel unchanged 06:50:29 Received message from Master: op=Shutter serial=42945 06:50:29 Shutter LASER close 06:50:29 Received message from Camera: op=State serial=42947 06:50:29 GetSingleValue result=40 Value=cccccccc 06:50:29 SkyScan query 06:50:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:50:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:30 Parameters OK 06:50:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:30 Set A/D data flow result=40 06:50:30 Set A/D channel type result=40 06:50:30 Set A/D encoding result=40 06:50:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:30 Set channel filter=0.000000e+000 result=40 06:50:30 Config A/D Result=40 06:50:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:30 Get A/D filter: -9.255963e+061 result=40 06:50:30 Get A/D value=-858993460 result=40 06:50:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:30 Parameters OK 06:50:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:30 Set A/D data flow result=40 06:50:30 Set A/D channel type result=40 06:50:30 Set A/D encoding result=40 06:50:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:30 Set channel filter=0.000000e+000 result=40 06:50:30 Config A/D Result=40 06:50:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:30 Get A/D filter: -9.255963e+061 result=40 06:50:30 Get A/D value=-858993460 result=40 06:50:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:30 Aux= 06:50:30 Message to Camera, serial 42947 queued 06:51:06 Received message from Master: op=PointingHead serial=42960 06:51:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:51:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:51:07 Point started: ret=0 06:51:07 point_skyscan result=0 06:51:07 Check angles 06:51:07 SkyScan query 06:51:08 SkyScan query done: ret=0 az=153.12<-10208 ze=6.51<-11566 Statuses=0009 0008 06:51:08 Msec=0 True Az=153.12 Ze=6.51 Az status=0009 Ze status=0008 06:51:08 Check angles 06:51:08 SkyScan query 06:51:09 SkyScan query done: ret=0 az=135.495<-9033 ze=6.495<-11567 Statuses=0009 0008 06:51:09 Msec=750 True Az=135.495 Ze=6.495 Az status=0009 Ze status=0008 06:51:09 Check angles 06:51:09 SkyScan query 06:51:10 SkyScan query done: ret=0 az=118.14<-7876 ze=6.495<-11567 Statuses=0009 0008 06:51:10 Msec=1500 True Az=118.14 Ze=6.495 Az status=0009 Ze status=0008 06:51:10 Check angles 06:51:10 SkyScan query 06:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:51:10 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:51:10 Message to Master queued w/err=0: serial=42960 error=0 06:51:15 Received message from Master: op=Filter serial=42961 06:51:15 Color wheel filter change from 0 to 0 06:51:15 FLIGetFilterPos err=0 currentPosition=0 06:51:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:15 Filter is already there-color wheel unchanged 06:51:15 Received message from Master: op=Shutter serial=42962 06:51:15 Shutter LASER close 06:51:15 Received message from Camera: op=State serial=42964 06:51:15 GetSingleValue result=40 Value=cccccccc 06:51:15 SkyScan query 06:51:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:51:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:16 Parameters OK 06:51:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:16 Set A/D data flow result=40 06:51:16 Set A/D channel type result=40 06:51:16 Set A/D encoding result=40 06:51:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:16 Set channel filter=0.000000e+000 result=40 06:51:16 Config A/D Result=40 06:51:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:16 Get A/D filter: -9.255963e+061 result=40 06:51:16 Get A/D value=-858993460 result=40 06:51:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:16 Parameters OK 06:51:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:16 Set A/D data flow result=40 06:51:16 Set A/D channel type result=40 06:51:16 Set A/D encoding result=40 06:51:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:16 Set channel filter=0.000000e+000 result=40 06:51:16 Config A/D Result=40 06:51:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:16 Get A/D filter: -9.255963e+061 result=40 06:51:16 Get A/D value=-858993460 result=40 06:51:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:16 Aux= 06:51:16 Message to Camera, serial 42964 queued 06:51:52 Received message from Master: op=PointingHead serial=42976 06:51:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:51:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:51:52 Point started: ret=0 06:51:52 point_skyscan result=0 06:51:53 Check angles 06:51:53 SkyScan query 06:51:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 06:51:54 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 06:51:54 Check angles 06:51:54 SkyScan query 06:51:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 06:51:54 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 06:51:55 Check angles 06:51:55 SkyScan query 06:51:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 06:51:55 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 06:51:55 Check angles 06:51:55 SkyScan query 06:51:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.25<-17750 Statuses=0008 0009 06:51:56 Msec=2250 True Az=112.995 Ze=-86.25 Az status=0008 Ze status=0009 06:51:56 Check angles 06:51:56 SkyScan query 06:51:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.19<-19146 Statuses=0008 0009 06:51:57 Msec=3000 True Az=112.995 Ze=-107.19 Az status=0008 Ze status=0009 06:51:57 Check angles 06:51:57 SkyScan query 06:51:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.145<-20543 Statuses=0008 0009 06:51:57 Msec=3750 True Az=112.995 Ze=-128.145 Az status=0008 Ze status=0009 06:51:58 Check angles 06:51:58 SkyScan query 06:51:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.1<-21940 Statuses=0008 0009 06:51:58 Msec=4500 True Az=112.995 Ze=-149.1 Az status=0008 Ze status=0009 06:51:58 Check angles 06:51:58 SkyScan query 06:51:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.055<-23337 Statuses=0008 0009 06:51:59 Msec=5250 True Az=112.995 Ze=-170.055 Az status=0008 Ze status=0009 06:51:59 Check angles 06:51:59 SkyScan query 06:52:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:52:00 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:52:00 Message to Master queued w/err=0: serial=42976 error=0 06:52:05 Received message from Master: op=Filter serial=42977 06:52:05 Color wheel filter change from 0 to 0 06:52:05 FLIGetFilterPos err=0 currentPosition=0 06:52:05 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:05 Filter is already there-color wheel unchanged 06:52:05 Received message from Master: op=Shutter serial=42978 06:52:05 Shutter LASER open 06:52:05 Received message from Camera: op=State serial=42980 06:52:05 GetSingleValue result=40 Value=cccccccc 06:52:05 SkyScan query 06:52:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:52:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:06 Parameters OK 06:52:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:06 Set A/D data flow result=40 06:52:06 Set A/D channel type result=40 06:52:06 Set A/D encoding result=40 06:52:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:06 Set channel filter=0.000000e+000 result=40 06:52:06 Config A/D Result=40 06:52:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:06 Get A/D filter: -9.255963e+061 result=40 06:52:06 Get A/D value=-858993460 result=40 06:52:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:06 Parameters OK 06:52:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:06 Set A/D data flow result=40 06:52:06 Set A/D channel type result=40 06:52:06 Set A/D encoding result=40 06:52:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:06 Set channel filter=0.000000e+000 result=40 06:52:06 Config A/D Result=40 06:52:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:06 Get A/D filter: -9.255963e+061 result=40 06:52:06 Get A/D value=-858993460 result=40 06:52:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:06 Aux= 06:52:06 Message to Camera, serial 42980 queued 06:52:13 Received message from Master: op=Shutter serial=42989 06:52:13 Shutter LASER close 06:52:13 Received message from Master: op=PointingHead serial=42993 06:52:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:52:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:52:14 Point started: ret=0 06:52:14 point_skyscan result=0 06:52:15 Check angles 06:52:15 SkyScan query 06:52:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.89<-21526 Statuses=0008 0009 06:52:15 Msec=0 True Az=112.995 Ze=-142.89 Az status=0008 Ze status=0009 06:52:15 Check angles 06:52:15 SkyScan query 06:52:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.37<-20158 Statuses=0008 0009 06:52:16 Msec=750 True Az=112.995 Ze=-122.37 Az status=0008 Ze status=0009 06:52:16 Check angles 06:52:16 SkyScan query 06:52:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 06:52:17 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 06:52:17 Check angles 06:52:17 SkyScan query 06:52:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 06:52:17 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 06:52:18 Check angles 06:52:18 SkyScan query 06:52:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 06:52:18 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 06:52:18 Check angles 06:52:18 SkyScan query 06:52:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.68<-14512 Statuses=0008 0009 06:52:19 Msec=3750 True Az=112.995 Ze=-37.68 Az status=0008 Ze status=0009 06:52:19 Check angles 06:52:19 SkyScan query 06:52:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.725<-13115 Statuses=0008 0009 06:52:20 Msec=4500 True Az=112.995 Ze=-16.725 Az status=0008 Ze status=0009 06:52:20 Check angles 06:52:20 SkyScan query 06:52:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 06:52:20 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 06:52:21 Check angles 06:52:21 SkyScan query 06:52:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:52:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:52:21 Message to Master queued w/err=0: serial=42993 error=0 06:52:26 Received message from Master: op=Filter serial=42994 06:52:26 Color wheel filter change from 0 to 0 06:52:26 FLIGetFilterPos err=0 currentPosition=0 06:52:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:26 Filter is already there-color wheel unchanged 06:52:26 Received message from Master: op=Shutter serial=42995 06:52:26 Shutter LASER close 06:52:27 Received message from Camera: op=State serial=42997 06:52:27 GetSingleValue result=40 Value=cccccccc 06:52:27 SkyScan query 06:52:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:52:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:27 Parameters OK 06:52:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:27 Set A/D data flow result=40 06:52:27 Set A/D channel type result=40 06:52:27 Set A/D encoding result=40 06:52:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:27 Set channel filter=0.000000e+000 result=40 06:52:27 Config A/D Result=40 06:52:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:27 Get A/D filter: -9.255963e+061 result=40 06:52:27 Get A/D value=-858993460 result=40 06:52:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:27 Parameters OK 06:52:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:27 Set A/D data flow result=40 06:52:27 Set A/D channel type result=40 06:52:27 Set A/D encoding result=40 06:52:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:27 Set channel filter=0.000000e+000 result=40 06:52:27 Config A/D Result=40 06:52:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:27 Get A/D filter: -9.255963e+061 result=40 06:52:27 Get A/D value=-858993460 result=40 06:52:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:27 Aux= 06:52:27 Message to Camera, serial 42997 queued 06:53:04 Received message from Master: op=PointingHead serial=43010 06:53:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:53:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:53:04 Point started: ret=0 06:53:04 point_skyscan result=0 06:53:05 Check angles 06:53:05 SkyScan query 06:53:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:53:06 Message to Master queued w/err=0: serial=43010 error=0 06:53:11 Received message from Master: op=Filter serial=43011 06:53:11 Color wheel filter change from 0 to 0 06:53:11 FLIGetFilterPos err=0 currentPosition=0 06:53:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:11 Filter is already there-color wheel unchanged 06:53:11 Received message from Master: op=Shutter serial=43012 06:53:11 Shutter LASER close 06:53:11 Received message from Camera: op=State serial=43014 06:53:11 GetSingleValue result=40 Value=cccccccc 06:53:11 SkyScan query 06:53:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:11 Parameters OK 06:53:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:11 Set A/D data flow result=40 06:53:11 Set A/D channel type result=40 06:53:11 Set A/D encoding result=40 06:53:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:11 Set channel filter=0.000000e+000 result=40 06:53:11 Config A/D Result=40 06:53:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:11 Get A/D filter: -9.255963e+061 result=40 06:53:11 Get A/D value=-858993460 result=40 06:53:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:11 Parameters OK 06:53:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:11 Set A/D data flow result=40 06:53:11 Set A/D channel type result=40 06:53:11 Set A/D encoding result=40 06:53:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:11 Set channel filter=0.000000e+000 result=40 06:53:11 Config A/D Result=40 06:53:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:11 Get A/D filter: -9.255963e+061 result=40 06:53:11 Get A/D value=-858993460 result=40 06:53:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:11 Aux= 06:53:11 Message to Camera, serial 43014 queued 06:53:48 Received message from Master: op=PointingHead serial=43027 06:53:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:53:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:53:49 Point started: ret=0 06:53:49 point_skyscan result=0 06:53:49 Check angles 06:53:49 SkyScan query 06:53:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:53:50 Message to Master queued w/err=0: serial=43027 error=0 06:53:55 Received message from Master: op=Filter serial=43028 06:53:55 Color wheel filter change from 0 to 0 06:53:55 FLIGetFilterPos err=0 currentPosition=0 06:53:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:55 Filter is already there-color wheel unchanged 06:53:55 Received message from Master: op=Shutter serial=43029 06:53:55 Shutter LASER close 06:53:55 Received message from Camera: op=State serial=43031 06:53:55 GetSingleValue result=40 Value=cccccccc 06:53:55 SkyScan query 06:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:56 Parameters OK 06:53:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:56 Set A/D data flow result=40 06:53:56 Set A/D channel type result=40 06:53:56 Set A/D encoding result=40 06:53:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:56 Set channel filter=0.000000e+000 result=40 06:53:56 Config A/D Result=40 06:53:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:56 Get A/D filter: -9.255963e+061 result=40 06:53:56 Get A/D value=-858993460 result=40 06:53:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:56 Parameters OK 06:53:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:56 Set A/D data flow result=40 06:53:56 Set A/D channel type result=40 06:53:56 Set A/D encoding result=40 06:53:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:56 Set channel filter=0.000000e+000 result=40 06:53:56 Config A/D Result=40 06:53:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:56 Get A/D filter: -9.255963e+061 result=40 06:53:56 Get A/D value=-858993460 result=40 06:53:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:56 Aux= 06:53:56 Message to Camera, serial 43031 queued [UTC 2019-3-1 06:54:33] 06:54:33 Received message from Master: op=PointingHead serial=43044 06:54:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:54:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:54:33 Point started: ret=0 06:54:33 point_skyscan result=0 06:54:34 Check angles 06:54:34 SkyScan query 06:54:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:54:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:54:34 Message to Master queued w/err=0: serial=43044 error=0 06:54:39 Received message from Master: op=Filter serial=43045 06:54:39 Color wheel filter change from 0 to 0 06:54:39 FLIGetFilterPos err=0 currentPosition=0 06:54:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:39 Filter is already there-color wheel unchanged 06:54:39 Received message from Master: op=Shutter serial=43046 06:54:39 Shutter LASER close 06:54:39 Received message from Camera: op=State serial=43048 06:54:39 GetSingleValue result=40 Value=cccccccc 06:54:39 SkyScan query 06:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:54:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:40 Parameters OK 06:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:40 Set A/D data flow result=40 06:54:40 Set A/D channel type result=40 06:54:40 Set A/D encoding result=40 06:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:40 Set channel filter=0.000000e+000 result=40 06:54:40 Config A/D Result=40 06:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:40 Get A/D filter: -9.255963e+061 result=40 06:54:40 Get A/D value=-858993460 result=40 06:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:40 Parameters OK 06:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:40 Set A/D data flow result=40 06:54:40 Set A/D channel type result=40 06:54:40 Set A/D encoding result=40 06:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:40 Set channel filter=0.000000e+000 result=40 06:54:40 Config A/D Result=40 06:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:40 Get A/D filter: -9.255963e+061 result=40 06:54:40 Get A/D value=-858993460 result=40 06:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:40 Aux= 06:54:40 Message to Camera, serial 43048 queued 06:55:17 Received message from Master: op=PointingHead serial=43061 06:55:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:55:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:55:17 Point started: ret=0 06:55:17 point_skyscan result=0 06:55:18 Check angles 06:55:18 SkyScan query 06:55:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.55<-13570 Statuses=0008 0009 06:55:19 Msec=0 True Az=112.995 Ze=-23.55 Az status=0008 Ze status=0009 06:55:19 Check angles 06:55:19 SkyScan query 06:55:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 06:55:19 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 06:55:19 Check angles 06:55:19 SkyScan query 06:55:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 06:55:20 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 06:55:20 Check angles 06:55:20 SkyScan query 06:55:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 06:55:21 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 06:55:21 Check angles 06:55:21 SkyScan query 06:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.37<-19158 Statuses=0008 0009 06:55:22 Msec=3000 True Az=112.995 Ze=-107.37 Az status=0008 Ze status=0009 06:55:22 Check angles 06:55:22 SkyScan query 06:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 06:55:22 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 06:55:22 Check angles 06:55:22 SkyScan query 06:55:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.7<-21980 Statuses=0008 0009 06:55:23 Msec=4500 True Az=112.995 Ze=-149.7 Az status=0008 Ze status=0009 06:55:23 Check angles 06:55:23 SkyScan query 06:55:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 06:55:24 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 06:55:24 Check angles 06:55:24 SkyScan query 06:55:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:55:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:55:25 Message to Master queued w/err=0: serial=43061 error=0 06:55:30 Received message from Master: op=Filter serial=43062 06:55:30 Color wheel filter change from 0 to 0 06:55:30 FLIGetFilterPos err=0 currentPosition=0 06:55:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:30 Filter is already there-color wheel unchanged 06:55:30 Received message from Master: op=Shutter serial=43063 06:55:30 Shutter LASER open 06:55:30 Received message from Camera: op=State serial=43065 06:55:30 GetSingleValue result=40 Value=cccccccc 06:55:30 SkyScan query 06:55:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:55:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:30 Parameters OK 06:55:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:30 Set A/D data flow result=40 06:55:30 Set A/D channel type result=40 06:55:30 Set A/D encoding result=40 06:55:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:30 Set channel filter=0.000000e+000 result=40 06:55:30 Config A/D Result=40 06:55:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:30 Get A/D filter: -9.255963e+061 result=40 06:55:30 Get A/D value=-858993460 result=40 06:55:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:30 Parameters OK 06:55:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:30 Set A/D data flow result=40 06:55:30 Set A/D channel type result=40 06:55:30 Set A/D encoding result=40 06:55:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:30 Set channel filter=0.000000e+000 result=40 06:55:30 Config A/D Result=40 06:55:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:30 Get A/D filter: -9.255963e+061 result=40 06:55:30 Get A/D value=-858993460 result=40 06:55:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:30 Aux= 06:55:30 Message to Camera, serial 43065 queued 06:55:39 Received message from Master: op=Shutter serial=43075 06:55:39 Shutter LASER close 06:55:40 Received message from Master: op=PointingHead serial=43079 06:55:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:55:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:55:40 Point started: ret=0 06:55:40 point_skyscan result=0 06:55:41 Check angles 06:55:41 SkyScan query 06:55:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 06:55:41 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 06:55:41 Check angles 06:55:41 SkyScan query 06:55:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 06:55:42 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 06:55:42 Check angles 06:55:42 SkyScan query 06:55:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 06:55:43 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 06:55:43 Check angles 06:55:43 SkyScan query 06:55:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 06:55:43 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 06:55:44 Check angles 06:55:44 SkyScan query 06:55:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 06:55:44 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 06:55:44 Check angles 06:55:44 SkyScan query 06:55:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 06:55:45 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 06:55:45 Check angles 06:55:45 SkyScan query 06:55:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 06:55:46 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 06:55:46 Check angles 06:55:46 SkyScan query 06:55:46 SkyScan query done: ret=0 az=112.995<-7533 ze=3.69<-11754 Statuses=0008 0009 06:55:46 Msec=5250 True Az=112.995 Ze=3.69 Az status=0008 Ze status=0009 06:55:47 Check angles 06:55:47 SkyScan query 06:55:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:55:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:55:47 Message to Master queued w/err=0: serial=43079 error=0 06:55:52 Received message from Master: op=Filter serial=43080 06:55:52 Color wheel filter change from 0 to 0 06:55:52 FLIGetFilterPos err=0 currentPosition=0 06:55:52 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:52 Filter is already there-color wheel unchanged 06:55:52 Received message from Master: op=Shutter serial=43081 06:55:52 Shutter LASER close 06:55:53 Received message from Camera: op=State serial=43083 06:55:53 GetSingleValue result=40 Value=cccccccc 06:55:53 SkyScan query 06:55:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:55:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:53 Parameters OK 06:55:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:53 Set A/D data flow result=40 06:55:53 Set A/D channel type result=40 06:55:53 Set A/D encoding result=40 06:55:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:53 Set channel filter=0.000000e+000 result=40 06:55:53 Config A/D Result=40 06:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:53 Get A/D filter: -9.255963e+061 result=40 06:55:53 Get A/D value=-858993460 result=40 06:55:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:53 Parameters OK 06:55:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:53 Set A/D data flow result=40 06:55:53 Set A/D channel type result=40 06:55:53 Set A/D encoding result=40 06:55:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:53 Set channel filter=0.000000e+000 result=40 06:55:53 Config A/D Result=40 06:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:53 Get A/D filter: -9.255963e+061 result=40 06:55:53 Get A/D value=-858993460 result=40 06:55:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:53 Aux= 06:55:53 Message to Camera, serial 43083 queued 06:56:30 Received message from Master: op=PointingHead serial=43096 06:56:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:56:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:56:30 Point started: ret=0 06:56:30 point_skyscan result=0 06:56:31 Check angles 06:56:31 SkyScan query 06:56:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:56:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:56:32 Message to Master queued w/err=0: serial=43096 error=0 06:56:37 Received message from Master: op=Filter serial=43097 06:56:37 Color wheel filter change from 0 to 0 06:56:37 FLIGetFilterPos err=0 currentPosition=0 06:56:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:37 Filter is already there-color wheel unchanged 06:56:37 Received message from Master: op=Shutter serial=43098 06:56:37 Shutter LASER close 06:56:37 Received message from Camera: op=State serial=43100 06:56:37 GetSingleValue result=40 Value=cccccccc 06:56:37 SkyScan query 06:56:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:56:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:37 Parameters OK 06:56:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:37 Set A/D data flow result=40 06:56:37 Set A/D channel type result=40 06:56:37 Set A/D encoding result=40 06:56:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:37 Set channel filter=0.000000e+000 result=40 06:56:37 Config A/D Result=40 06:56:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:37 Get A/D filter: -9.255963e+061 result=40 06:56:37 Get A/D value=-858993460 result=40 06:56:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:37 Parameters OK 06:56:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:37 Set A/D data flow result=40 06:56:37 Set A/D channel type result=40 06:56:37 Set A/D encoding result=40 06:56:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:37 Set channel filter=0.000000e+000 result=40 06:56:37 Config A/D Result=40 06:56:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:37 Get A/D filter: -9.255963e+061 result=40 06:56:37 Get A/D value=-858993460 result=40 06:56:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:37 Aux= 06:56:37 Message to Camera, serial 43100 queued 06:57:14 Received message from Master: op=PointingHead serial=43113 06:57:14 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:57:14 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:57:15 Point started: ret=0 06:57:15 point_skyscan result=0 06:57:15 Check angles 06:57:15 SkyScan query 06:57:16 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 06:57:16 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 06:57:16 Check angles 06:57:16 SkyScan query 06:57:17 SkyScan query done: ret=0 az=153.84<-10256 ze=-6.495<-12433 Statuses=0009 0008 06:57:17 Msec=750 True Az=153.84 Ze=-6.495 Az status=0009 Ze status=0008 06:57:17 Check angles 06:57:17 SkyScan query 06:57:17 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 06:57:17 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 06:57:18 Check angles 06:57:18 SkyScan query 06:57:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:57:18 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:57:18 Message to Master queued w/err=0: serial=43113 error=0 06:57:23 Received message from Master: op=Filter serial=43114 06:57:23 Color wheel filter change from 0 to 0 06:57:23 FLIGetFilterPos err=0 currentPosition=0 06:57:23 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:23 Filter is already there-color wheel unchanged 06:57:23 Received message from Master: op=Shutter serial=43115 06:57:23 Shutter LASER close 06:57:23 Received message from Camera: op=State serial=43117 06:57:23 GetSingleValue result=40 Value=cccccccc 06:57:23 SkyScan query 06:57:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:57:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:24 Parameters OK 06:57:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:24 Set A/D data flow result=40 06:57:24 Set A/D channel type result=40 06:57:24 Set A/D encoding result=40 06:57:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:24 Set channel filter=0.000000e+000 result=40 06:57:24 Config A/D Result=40 06:57:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:24 Get A/D filter: -9.255963e+061 result=40 06:57:24 Get A/D value=-858993460 result=40 06:57:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:24 Parameters OK 06:57:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:24 Set A/D data flow result=40 06:57:24 Set A/D channel type result=40 06:57:24 Set A/D encoding result=40 06:57:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:24 Set channel filter=0.000000e+000 result=40 06:57:24 Config A/D Result=40 06:57:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:24 Get A/D filter: -9.255963e+061 result=40 06:57:24 Get A/D value=-858993460 result=40 06:57:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:24 Aux= 06:57:24 Message to Camera, serial 43117 queued 06:58:01 Received message from Master: op=PointingHead serial=43130 06:58:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:58:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:58:01 Point started: ret=0 06:58:01 point_skyscan result=0 06:58:02 Check angles 06:58:02 SkyScan query 06:58:02 SkyScan query done: ret=0 az=153.18<-10212 ze=6.51<-11566 Statuses=0009 0008 06:58:02 Msec=0 True Az=153.18 Ze=6.51 Az status=0009 Ze status=0008 06:58:03 Check angles 06:58:03 SkyScan query 06:58:03 SkyScan query done: ret=0 az=135.675<-9045 ze=6.495<-11567 Statuses=0009 0008 06:58:03 Msec=750 True Az=135.675 Ze=6.495 Az status=0009 Ze status=0008 06:58:03 Check angles 06:58:03 SkyScan query 06:58:04 SkyScan query done: ret=0 az=117.795<-7853 ze=6.495<-11567 Statuses=0009 0008 06:58:04 Msec=1500 True Az=117.795 Ze=6.495 Az status=0009 Ze status=0008 06:58:04 Check angles 06:58:04 SkyScan query 06:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:58:05 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:58:05 Message to Master queued w/err=0: serial=43130 error=0 06:58:10 Received message from Master: op=Filter serial=43131 06:58:10 Color wheel filter change from 0 to 0 06:58:10 FLIGetFilterPos err=0 currentPosition=0 06:58:10 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:10 Filter is already there-color wheel unchanged 06:58:10 Received message from Master: op=Shutter serial=43132 06:58:10 Shutter LASER close 06:58:10 Received message from Camera: op=State serial=43134 06:58:10 GetSingleValue result=40 Value=cccccccc 06:58:10 SkyScan query 06:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:58:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:11 Parameters OK 06:58:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:11 Set A/D data flow result=40 06:58:11 Set A/D channel type result=40 06:58:11 Set A/D encoding result=40 06:58:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:11 Set channel filter=0.000000e+000 result=40 06:58:11 Config A/D Result=40 06:58:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:11 Get A/D filter: -9.255963e+061 result=40 06:58:11 Get A/D value=-858993460 result=40 06:58:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:11 Parameters OK 06:58:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:11 Set A/D data flow result=40 06:58:11 Set A/D channel type result=40 06:58:11 Set A/D encoding result=40 06:58:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:11 Set channel filter=0.000000e+000 result=40 06:58:11 Config A/D Result=40 06:58:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:11 Get A/D filter: -9.255963e+061 result=40 06:58:11 Get A/D value=-858993460 result=40 06:58:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:11 Aux= 06:58:11 Message to Camera, serial 43134 queued 06:58:47 Received message from Master: op=PointingHead serial=43147 06:58:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:58:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:58:48 Point started: ret=0 06:58:48 point_skyscan result=0 06:58:48 Check angles 06:58:48 SkyScan query 06:58:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 06:58:49 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 06:58:49 Check angles 06:58:49 SkyScan query 06:58:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.1<-14940 Statuses=0008 0009 06:58:50 Msec=750 True Az=112.995 Ze=-44.1 Az status=0008 Ze status=0009 06:58:50 Check angles 06:58:50 SkyScan query 06:58:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.055<-16337 Statuses=0008 0009 06:58:51 Msec=1500 True Az=112.995 Ze=-65.055 Az status=0008 Ze status=0009 06:58:51 Check angles 06:58:51 SkyScan query 06:58:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.01<-17734 Statuses=0008 0009 06:58:51 Msec=2250 True Az=112.995 Ze=-86.01 Az status=0008 Ze status=0009 06:58:51 Check angles 06:58:51 SkyScan query 06:58:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.95<-19130 Statuses=0008 0009 06:58:52 Msec=3000 True Az=112.995 Ze=-106.95 Az status=0008 Ze status=0009 06:58:52 Check angles 06:58:52 SkyScan query 06:58:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.92<-20528 Statuses=0008 0009 06:58:53 Msec=3750 True Az=112.995 Ze=-127.92 Az status=0008 Ze status=0009 06:58:53 Check angles 06:58:53 SkyScan query 06:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.875<-21925 Statuses=0008 0009 06:58:54 Msec=4500 True Az=112.995 Ze=-148.875 Az status=0008 Ze status=0009 06:58:54 Check angles 06:58:54 SkyScan query 06:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.815<-23321 Statuses=0008 0009 06:58:54 Msec=5250 True Az=112.995 Ze=-169.815 Az status=0008 Ze status=0009 06:58:54 Check angles 06:58:54 SkyScan query 06:58:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:58:55 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:58:55 Message to Master queued w/err=0: serial=43147 error=0 06:59:00 Received message from Master: op=Filter serial=43148 06:59:00 Color wheel filter change from 0 to 0 06:59:00 FLIGetFilterPos err=0 currentPosition=0 06:59:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:00 Filter is already there-color wheel unchanged 06:59:00 Received message from Master: op=Shutter serial=43149 06:59:00 Shutter LASER open 06:59:00 Received message from Camera: op=State serial=43151 06:59:00 GetSingleValue result=40 Value=cccccccc 06:59:00 SkyScan query 06:59:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:59:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:01 Parameters OK 06:59:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:01 Set A/D data flow result=40 06:59:01 Set A/D channel type result=40 06:59:01 Set A/D encoding result=40 06:59:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:01 Set channel filter=0.000000e+000 result=40 06:59:01 Config A/D Result=40 06:59:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:01 Get A/D filter: -9.255963e+061 result=40 06:59:01 Get A/D value=-858993460 result=40 06:59:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:01 Parameters OK 06:59:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:01 Set A/D data flow result=40 06:59:01 Set A/D channel type result=40 06:59:01 Set A/D encoding result=40 06:59:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:01 Set channel filter=0.000000e+000 result=40 06:59:01 Config A/D Result=40 06:59:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:01 Get A/D filter: -9.255963e+061 result=40 06:59:01 Get A/D value=-858993460 result=40 06:59:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:01 Aux= 06:59:01 Message to Camera, serial 43151 queued 06:59:09 Received message from Master: op=Shutter serial=43161 06:59:09 Shutter LASER close 06:59:10 Received message from Master: op=PointingHead serial=43165 06:59:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:59:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:59:10 Point started: ret=0 06:59:10 point_skyscan result=0 06:59:11 Check angles 06:59:11 SkyScan query 06:59:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 06:59:12 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 06:59:12 Check angles 06:59:12 SkyScan query 06:59:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.01<-20134 Statuses=0008 0009 06:59:12 Msec=750 True Az=112.995 Ze=-122.01 Az status=0008 Ze status=0009 06:59:12 Check angles 06:59:12 SkyScan query 06:59:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 06:59:13 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 06:59:13 Check angles 06:59:13 SkyScan query 06:59:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 06:59:14 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 06:59:14 Check angles 06:59:14 SkyScan query 06:59:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 06:59:15 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 06:59:15 Check angles 06:59:15 SkyScan query 06:59:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 06:59:15 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 06:59:15 Check angles 06:59:15 SkyScan query 06:59:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 06:59:16 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 06:59:16 Check angles 06:59:16 SkyScan query 06:59:17 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 06:59:17 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 06:59:17 Check angles 06:59:17 SkyScan query 06:59:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:59:18 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:59:18 Message to Master queued w/err=0: serial=43165 error=0 06:59:23 Received message from Master: op=Filter serial=43166 06:59:23 Color wheel filter change from 0 to 0 06:59:23 FLIGetFilterPos err=0 currentPosition=0 06:59:23 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:23 Filter is already there-color wheel unchanged 06:59:23 Received message from Master: op=Shutter serial=43167 06:59:23 Shutter LASER close 06:59:23 Received message from Camera: op=State serial=43169 06:59:23 GetSingleValue result=40 Value=cccccccc 06:59:23 SkyScan query 06:59:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:59:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:23 Parameters OK 06:59:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:23 Set A/D data flow result=40 06:59:23 Set A/D channel type result=40 06:59:23 Set A/D encoding result=40 06:59:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:23 Set channel filter=0.000000e+000 result=40 06:59:23 Config A/D Result=40 06:59:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:23 Get A/D filter: -9.255963e+061 result=40 06:59:23 Get A/D value=-858993460 result=40 06:59:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:23 Parameters OK 06:59:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:23 Set A/D data flow result=40 06:59:23 Set A/D channel type result=40 06:59:23 Set A/D encoding result=40 06:59:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:23 Set channel filter=0.000000e+000 result=40 06:59:23 Config A/D Result=40 06:59:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:23 Get A/D filter: -9.255963e+061 result=40 06:59:23 Get A/D value=-858993460 result=40 06:59:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:23 Aux= 06:59:23 Message to Camera, serial 43169 queued 07:00:00 Received message from Master: op=PointingHead serial=43182 07:00:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:00:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:00:01 Point started: ret=0 07:00:01 point_skyscan result=0 07:00:01 Check angles 07:00:01 SkyScan query 07:00:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:00:02 Message to Master queued w/err=0: serial=43182 error=0 07:00:07 Received message from Master: op=Filter serial=43183 07:00:07 Color wheel filter change from 0 to 0 07:00:07 FLIGetFilterPos err=0 currentPosition=0 07:00:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:07 Filter is already there-color wheel unchanged 07:00:07 Received message from Master: op=Shutter serial=43184 07:00:07 Shutter LASER close 07:00:07 Received message from Camera: op=State serial=43186 07:00:07 GetSingleValue result=40 Value=cccccccc 07:00:07 SkyScan query 07:00:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:08 Parameters OK 07:00:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:08 Set A/D data flow result=40 07:00:08 Set A/D channel type result=40 07:00:08 Set A/D encoding result=40 07:00:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:08 Set channel filter=0.000000e+000 result=40 07:00:08 Config A/D Result=40 07:00:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:08 Get A/D filter: -9.255963e+061 result=40 07:00:08 Get A/D value=-858993460 result=40 07:00:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:08 Parameters OK 07:00:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:08 Set A/D data flow result=40 07:00:08 Set A/D channel type result=40 07:00:08 Set A/D encoding result=40 07:00:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:08 Set channel filter=0.000000e+000 result=40 07:00:08 Config A/D Result=40 07:00:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:08 Get A/D filter: -9.255963e+061 result=40 07:00:08 Get A/D value=-858993460 result=40 07:00:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:08 Aux= 07:00:08 Message to Camera, serial 43186 queued 07:00:45 Received message from Master: op=PointingHead serial=43199 07:00:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:00:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:00:45 Point started: ret=0 07:00:45 point_skyscan result=0 07:00:46 Check angles 07:00:46 SkyScan query 07:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:00:46 Message to Master queued w/err=0: serial=43199 error=0 07:00:51 Received message from Master: op=Filter serial=43200 07:00:51 Color wheel filter change from 0 to 0 07:00:51 FLIGetFilterPos err=0 currentPosition=0 07:00:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:51 Filter is already there-color wheel unchanged 07:00:51 Received message from Master: op=Shutter serial=43201 07:00:51 Shutter LASER close 07:00:51 Received message from Camera: op=State serial=43203 07:00:51 GetSingleValue result=40 Value=cccccccc 07:00:51 SkyScan query 07:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:52 Parameters OK 07:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:52 Set A/D data flow result=40 07:00:52 Set A/D channel type result=40 07:00:52 Set A/D encoding result=40 07:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:52 Set channel filter=0.000000e+000 result=40 07:00:52 Config A/D Result=40 07:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:52 Get A/D filter: -9.255963e+061 result=40 07:00:52 Get A/D value=-858993460 result=40 07:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:52 Parameters OK 07:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:52 Set A/D data flow result=40 07:00:52 Set A/D channel type result=40 07:00:52 Set A/D encoding result=40 07:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:52 Set channel filter=0.000000e+000 result=40 07:00:52 Config A/D Result=40 07:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:52 Get A/D filter: -9.255963e+061 result=40 07:00:52 Get A/D value=-858993460 result=40 07:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:52 Aux= 07:00:52 Message to Camera, serial 43203 queued 07:01:29 Received message from Master: op=PointingHead serial=43216 07:01:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:01:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:01:29 Point started: ret=0 07:01:29 point_skyscan result=0 07:01:30 Check angles 07:01:30 SkyScan query 07:01:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:01:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:01:31 Message to Master queued w/err=0: serial=43216 error=0 07:01:36 Received message from Master: op=Filter serial=43217 07:01:36 Color wheel filter change from 0 to 0 07:01:36 FLIGetFilterPos err=0 currentPosition=0 07:01:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:36 Filter is already there-color wheel unchanged 07:01:36 Received message from Master: op=Shutter serial=43218 07:01:36 Shutter LASER close 07:01:36 Received message from Camera: op=State serial=43220 07:01:36 GetSingleValue result=40 Value=cccccccc 07:01:36 SkyScan query 07:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:01:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:36 Parameters OK 07:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:36 Set A/D data flow result=40 07:01:36 Set A/D channel type result=40 07:01:36 Set A/D encoding result=40 07:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:36 Set channel filter=0.000000e+000 result=40 07:01:36 Config A/D Result=40 07:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:36 Get A/D filter: -9.255963e+061 result=40 07:01:36 Get A/D value=-858993460 result=40 07:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:36 Parameters OK 07:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:36 Set A/D data flow result=40 07:01:36 Set A/D channel type result=40 07:01:36 Set A/D encoding result=40 07:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:36 Set channel filter=0.000000e+000 result=40 07:01:36 Config A/D Result=40 07:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:36 Get A/D filter: -9.255963e+061 result=40 07:01:36 Get A/D value=-858993460 result=40 07:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:36 Aux= 07:01:36 Message to Camera, serial 43220 queued 07:02:13 Received message from Master: op=PointingHead serial=43233 07:02:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:02:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:02:14 Point started: ret=0 07:02:14 point_skyscan result=0 07:02:14 Check angles 07:02:14 SkyScan query 07:02:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 07:02:15 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 07:02:15 Check angles 07:02:15 SkyScan query 07:02:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 07:02:16 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 07:02:16 Check angles 07:02:16 SkyScan query 07:02:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 07:02:16 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 07:02:17 Check angles 07:02:17 SkyScan query 07:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.965<-17731 Statuses=0008 0009 07:02:17 Msec=2250 True Az=112.995 Ze=-85.965 Az status=0008 Ze status=0009 07:02:17 Check angles 07:02:17 SkyScan query 07:02:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.34<-19156 Statuses=0008 0009 07:02:18 Msec=3000 True Az=112.995 Ze=-107.34 Az status=0008 Ze status=0009 07:02:18 Check angles 07:02:18 SkyScan query 07:02:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.295<-20553 Statuses=0008 0009 07:02:19 Msec=3750 True Az=112.995 Ze=-128.295 Az status=0008 Ze status=0009 07:02:19 Check angles 07:02:19 SkyScan query 07:02:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.265<-21951 Statuses=0008 0009 07:02:19 Msec=4500 True Az=112.995 Ze=-149.265 Az status=0008 Ze status=0009 07:02:20 Check angles 07:02:20 SkyScan query 07:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 07:02:20 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 07:02:20 Check angles 07:02:20 SkyScan query 07:02:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:02:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:02:21 Message to Master queued w/err=0: serial=43233 error=0 07:02:26 Received message from Master: op=Filter serial=43234 07:02:26 Color wheel filter change from 0 to 0 07:02:26 FLIGetFilterPos err=0 currentPosition=0 07:02:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:26 Filter is already there-color wheel unchanged 07:02:26 Received message from Master: op=Shutter serial=43235 07:02:26 Shutter LASER open 07:02:26 Received message from Camera: op=State serial=43237 07:02:26 GetSingleValue result=40 Value=cccccccc 07:02:26 SkyScan query 07:02:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:02:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:27 Parameters OK 07:02:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:27 Set A/D data flow result=40 07:02:27 Set A/D channel type result=40 07:02:27 Set A/D encoding result=40 07:02:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:27 Set channel filter=0.000000e+000 result=40 07:02:27 Config A/D Result=40 07:02:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:27 Get A/D filter: -9.255963e+061 result=40 07:02:27 Get A/D value=-858993460 result=40 07:02:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:27 Parameters OK 07:02:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:27 Set A/D data flow result=40 07:02:27 Set A/D channel type result=40 07:02:27 Set A/D encoding result=40 07:02:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:27 Set channel filter=0.000000e+000 result=40 07:02:27 Config A/D Result=40 07:02:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:27 Get A/D filter: -9.255963e+061 result=40 07:02:27 Get A/D value=-858993460 result=40 07:02:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:27 Aux= 07:02:27 Message to Camera, serial 43237 queued 07:02:35 Received message from Master: op=Shutter serial=43247 07:02:35 Shutter LASER close 07:02:36 Received message from Master: op=PointingHead serial=43251 07:02:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:02:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:02:36 Point started: ret=0 07:02:36 point_skyscan result=0 07:02:37 Check angles 07:02:37 SkyScan query 07:02:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 07:02:38 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 07:02:38 Check angles 07:02:38 SkyScan query 07:02:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.01<-20134 Statuses=0008 0009 07:02:38 Msec=750 True Az=112.995 Ze=-122.01 Az status=0008 Ze status=0009 07:02:38 Check angles 07:02:38 SkyScan query 07:02:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 07:02:39 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 07:02:39 Check angles 07:02:39 SkyScan query 07:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.68<-17312 Statuses=0008 0009 07:02:40 Msec=2250 True Az=112.995 Ze=-79.68 Az status=0008 Ze status=0009 07:02:40 Check angles 07:02:40 SkyScan query 07:02:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 07:02:41 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 07:02:41 Check angles 07:02:41 SkyScan query 07:02:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 07:02:41 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 07:02:41 Check angles 07:02:41 SkyScan query 07:02:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.38<-13092 Statuses=0008 0009 07:02:42 Msec=4500 True Az=112.995 Ze=-16.38 Az status=0008 Ze status=0009 07:02:42 Check angles 07:02:42 SkyScan query 07:02:43 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 07:02:43 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 07:02:43 Check angles 07:02:43 SkyScan query 07:02:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:02:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:02:44 Message to Master queued w/err=0: serial=43251 error=0 07:02:49 Received message from Master: op=Filter serial=43252 07:02:49 Color wheel filter change from 0 to 0 07:02:49 FLIGetFilterPos err=0 currentPosition=0 07:02:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:49 Filter is already there-color wheel unchanged 07:02:49 Received message from Master: op=Shutter serial=43253 07:02:49 Shutter LASER close 07:02:49 Received message from Camera: op=State serial=43255 07:02:49 GetSingleValue result=40 Value=cccccccc 07:02:49 SkyScan query 07:02:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:02:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:49 Parameters OK 07:02:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:49 Set A/D data flow result=40 07:02:49 Set A/D channel type result=40 07:02:49 Set A/D encoding result=40 07:02:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:49 Set channel filter=0.000000e+000 result=40 07:02:49 Config A/D Result=40 07:02:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:49 Get A/D filter: -9.255963e+061 result=40 07:02:49 Get A/D value=-858993460 result=40 07:02:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:49 Parameters OK 07:02:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:49 Set A/D data flow result=40 07:02:49 Set A/D channel type result=40 07:02:49 Set A/D encoding result=40 07:02:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:49 Set channel filter=0.000000e+000 result=40 07:02:49 Config A/D Result=40 07:02:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:49 Get A/D filter: -9.255963e+061 result=40 07:02:49 Get A/D value=-858993460 result=40 07:02:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:49 Aux= 07:02:49 Message to Camera, serial 43255 queued 07:03:26 Received message from Master: op=PointingHead serial=43268 07:03:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:03:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:03:27 Point started: ret=0 07:03:27 point_skyscan result=0 07:03:27 Check angles 07:03:27 SkyScan query 07:03:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:03:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:03:28 Message to Master queued w/err=0: serial=43268 error=0 07:03:33 Received message from Master: op=Filter serial=43269 07:03:33 Color wheel filter change from 0 to 0 07:03:33 FLIGetFilterPos err=0 currentPosition=0 07:03:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:33 Filter is already there-color wheel unchanged 07:03:33 Received message from Master: op=Shutter serial=43270 07:03:33 Shutter LASER close 07:03:33 Received message from Camera: op=State serial=43272 07:03:33 GetSingleValue result=40 Value=cccccccc 07:03:33 SkyScan query 07:03:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:03:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:34 Parameters OK 07:03:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:34 Set A/D data flow result=40 07:03:34 Set A/D channel type result=40 07:03:34 Set A/D encoding result=40 07:03:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:34 Set channel filter=0.000000e+000 result=40 07:03:34 Config A/D Result=40 07:03:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:34 Get A/D filter: -9.255963e+061 result=40 07:03:34 Get A/D value=-858993460 result=40 07:03:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:34 Parameters OK 07:03:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:34 Set A/D data flow result=40 07:03:34 Set A/D channel type result=40 07:03:34 Set A/D encoding result=40 07:03:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:34 Set channel filter=0.000000e+000 result=40 07:03:34 Config A/D Result=40 07:03:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:34 Get A/D filter: -9.255963e+061 result=40 07:03:34 Get A/D value=-858993460 result=40 07:03:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:34 Aux= 07:03:34 Message to Camera, serial 43272 queued 07:03:38 Received message from Master: op=Identify serial=43273 [UTC 2019-3-1 07:03:50] 07:04:11 Received message from Master: op=PointingHead serial=43288 07:04:11 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:04:11 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:04:11 Point started: ret=0 07:04:11 point_skyscan result=0 07:04:12 Check angles 07:04:12 SkyScan query 07:04:12 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 07:04:12 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 07:04:12 Check angles 07:04:12 SkyScan query 07:04:13 SkyScan query done: ret=0 az=153.675<-10245 ze=-6.495<-12433 Statuses=0009 0008 07:04:13 Msec=750 True Az=153.675 Ze=-6.495 Az status=0009 Ze status=0008 07:04:13 Check angles 07:04:13 SkyScan query 07:04:14 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 07:04:14 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 07:04:14 Check angles 07:04:14 SkyScan query 07:04:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:04:15 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:04:15 Message to Master queued w/err=0: serial=43288 error=0 07:04:20 Received message from Master: op=Filter serial=43289 07:04:20 Color wheel filter change from 0 to 0 07:04:20 FLIGetFilterPos err=0 currentPosition=0 07:04:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:20 Filter is already there-color wheel unchanged 07:04:20 Received message from Master: op=Shutter serial=43290 07:04:20 Shutter LASER close 07:04:20 Received message from Camera: op=State serial=43292 07:04:20 GetSingleValue result=40 Value=cccccccc 07:04:20 SkyScan query 07:04:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:04:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:20 Parameters OK 07:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:20 Set A/D data flow result=40 07:04:20 Set A/D channel type result=40 07:04:20 Set A/D encoding result=40 07:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:20 Set channel filter=0.000000e+000 result=40 07:04:20 Config A/D Result=40 07:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:20 Get A/D filter: -9.255963e+061 result=40 07:04:20 Get A/D value=-858993460 result=40 07:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:20 Parameters OK 07:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:20 Set A/D data flow result=40 07:04:20 Set A/D channel type result=40 07:04:20 Set A/D encoding result=40 07:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:20 Set channel filter=0.000000e+000 result=40 07:04:20 Config A/D Result=40 07:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:20 Get A/D filter: -9.255963e+061 result=40 07:04:20 Get A/D value=-858993460 result=40 07:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:20 Aux= 07:04:20 Message to Camera, serial 43292 queued 07:04:57 Received message from Master: op=PointingHead serial=43305 07:04:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:04:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:04:57 Point started: ret=0 07:04:58 point_skyscan result=0 07:04:58 Check angles 07:04:58 SkyScan query 07:04:59 SkyScan query done: ret=0 az=152.52<-10168 ze=6.51<-11566 Statuses=0009 0008 07:04:59 Msec=0 True Az=152.52 Ze=6.51 Az status=0009 Ze status=0008 07:04:59 Check angles 07:04:59 SkyScan query 07:05:00 SkyScan query done: ret=0 az=134.7<-8980 ze=6.495<-11567 Statuses=0009 0008 07:05:00 Msec=750 True Az=134.7 Ze=6.495 Az status=0009 Ze status=0008 07:05:00 Check angles 07:05:00 SkyScan query 07:05:00 SkyScan query done: ret=0 az=117.24<-7816 ze=6.495<-11567 Statuses=0009 0008 07:05:00 Msec=1500 True Az=117.24 Ze=6.495 Az status=0009 Ze status=0008 07:05:01 Check angles 07:05:01 SkyScan query 07:05:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:05:01 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:05:01 Message to Master queued w/err=0: serial=43305 error=0 07:05:06 Received message from Master: op=Filter serial=43306 07:05:06 Color wheel filter change from 0 to 0 07:05:06 FLIGetFilterPos err=0 currentPosition=0 07:05:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:06 Filter is already there-color wheel unchanged 07:05:06 Received message from Master: op=Shutter serial=43307 07:05:06 Shutter LASER close 07:05:06 Received message from Camera: op=State serial=43309 07:05:06 GetSingleValue result=40 Value=cccccccc 07:05:06 SkyScan query 07:05:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:05:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:07 Parameters OK 07:05:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:07 Set A/D data flow result=40 07:05:07 Set A/D channel type result=40 07:05:07 Set A/D encoding result=40 07:05:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:07 Set channel filter=0.000000e+000 result=40 07:05:07 Config A/D Result=40 07:05:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:07 Get A/D filter: -9.255963e+061 result=40 07:05:07 Get A/D value=-858993460 result=40 07:05:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:07 Parameters OK 07:05:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:07 Set A/D data flow result=40 07:05:07 Set A/D channel type result=40 07:05:07 Set A/D encoding result=40 07:05:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:07 Set channel filter=0.000000e+000 result=40 07:05:07 Config A/D Result=40 07:05:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:07 Get A/D filter: -9.255963e+061 result=40 07:05:07 Get A/D value=-858993460 result=40 07:05:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:07 Aux= 07:05:07 Message to Camera, serial 43309 queued 07:05:44 Received message from Master: op=PointingHead serial=43322 07:05:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:05:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:05:44 Point started: ret=0 07:05:44 point_skyscan result=0 07:05:45 Check angles 07:05:45 SkyScan query 07:05:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 07:05:45 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 07:05:46 Check angles 07:05:46 SkyScan query 07:05:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 07:05:46 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 07:05:46 Check angles 07:05:46 SkyScan query 07:05:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 07:05:47 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 07:05:47 Check angles 07:05:47 SkyScan query 07:05:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 07:05:48 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 07:05:48 Check angles 07:05:48 SkyScan query 07:05:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 07:05:48 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 07:05:49 Check angles 07:05:49 SkyScan query 07:05:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.355<-20557 Statuses=0008 0009 07:05:49 Msec=3750 True Az=112.995 Ze=-128.355 Az status=0008 Ze status=0009 07:05:49 Check angles 07:05:49 SkyScan query 07:05:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.325<-21955 Statuses=0008 0009 07:05:50 Msec=4500 True Az=112.995 Ze=-149.325 Az status=0008 Ze status=0009 07:05:50 Check angles 07:05:50 SkyScan query 07:05:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 07:05:51 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 07:05:51 Check angles 07:05:51 SkyScan query 07:05:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:05:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:05:51 Message to Master queued w/err=0: serial=43322 error=0 07:05:56 Received message from Master: op=Filter serial=43323 07:05:56 Color wheel filter change from 0 to 0 07:05:56 FLIGetFilterPos err=0 currentPosition=0 07:05:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:56 Filter is already there-color wheel unchanged 07:05:57 Received message from Master: op=Shutter serial=43324 07:05:57 Shutter LASER open 07:05:57 Received message from Camera: op=State serial=43326 07:05:57 GetSingleValue result=40 Value=cccccccc 07:05:57 SkyScan query 07:05:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:05:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:57 Parameters OK 07:05:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:57 Set A/D data flow result=40 07:05:57 Set A/D channel type result=40 07:05:57 Set A/D encoding result=40 07:05:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:57 Set channel filter=0.000000e+000 result=40 07:05:57 Config A/D Result=40 07:05:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:57 Get A/D filter: -9.255963e+061 result=40 07:05:57 Get A/D value=-858993460 result=40 07:05:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:57 Parameters OK 07:05:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:57 Set A/D data flow result=40 07:05:57 Set A/D channel type result=40 07:05:57 Set A/D encoding result=40 07:05:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:57 Set channel filter=0.000000e+000 result=40 07:05:57 Config A/D Result=40 07:05:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:57 Get A/D filter: -9.255963e+061 result=40 07:05:57 Get A/D value=-858993460 result=40 07:05:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:57 Aux= 07:05:57 Message to Camera, serial 43326 queued 07:06:05 Received message from Master: op=Shutter serial=43335 07:06:05 Shutter LASER close 07:06:05 Received message from Master: op=PointingHead serial=43339 07:06:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:06:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:06:06 Point started: ret=0 07:06:06 point_skyscan result=0 07:06:06 Check angles 07:06:06 SkyScan query 07:06:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 07:06:07 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 07:06:07 Check angles 07:06:07 SkyScan query 07:06:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 07:06:08 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 07:06:08 Check angles 07:06:08 SkyScan query 07:06:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 07:06:08 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 07:06:09 Check angles 07:06:09 SkyScan query 07:06:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.355<-17357 Statuses=0008 0009 07:06:09 Msec=2250 True Az=112.995 Ze=-80.355 Az status=0008 Ze status=0009 07:06:09 Check angles 07:06:09 SkyScan query 07:06:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.4<-15960 Statuses=0008 0009 07:06:10 Msec=3000 True Az=112.995 Ze=-59.4 Az status=0008 Ze status=0009 07:06:10 Check angles 07:06:10 SkyScan query 07:06:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.445<-14563 Statuses=0008 0009 07:06:11 Msec=3750 True Az=112.995 Ze=-38.445 Az status=0008 Ze status=0009 07:06:11 Check angles 07:06:11 SkyScan query 07:06:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.49<-13166 Statuses=0008 0009 07:06:11 Msec=4500 True Az=112.995 Ze=-17.49 Az status=0008 Ze status=0009 07:06:12 Check angles 07:06:12 SkyScan query 07:06:12 SkyScan query done: ret=0 az=112.995<-7533 ze=3.465<-11769 Statuses=0008 0009 07:06:12 Msec=5250 True Az=112.995 Ze=3.465 Az status=0008 Ze status=0009 07:06:12 Check angles 07:06:12 SkyScan query 07:06:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:06:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:06:13 Message to Master queued w/err=0: serial=43339 error=0 07:06:18 Received message from Master: op=Filter serial=43340 07:06:18 Color wheel filter change from 0 to 0 07:06:18 FLIGetFilterPos err=0 currentPosition=0 07:06:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:18 Filter is already there-color wheel unchanged 07:06:18 Received message from Master: op=Shutter serial=43341 07:06:18 Shutter LASER close 07:06:18 Received message from Camera: op=State serial=43343 07:06:18 GetSingleValue result=40 Value=cccccccc 07:06:18 SkyScan query 07:06:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:19 Parameters OK 07:06:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:19 Set A/D data flow result=40 07:06:19 Set A/D channel type result=40 07:06:19 Set A/D encoding result=40 07:06:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:19 Set channel filter=0.000000e+000 result=40 07:06:19 Config A/D Result=40 07:06:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:19 Get A/D filter: -9.255963e+061 result=40 07:06:19 Get A/D value=-858993460 result=40 07:06:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:19 Parameters OK 07:06:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:19 Set A/D data flow result=40 07:06:19 Set A/D channel type result=40 07:06:19 Set A/D encoding result=40 07:06:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:19 Set channel filter=0.000000e+000 result=40 07:06:19 Config A/D Result=40 07:06:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:19 Get A/D filter: -9.255963e+061 result=40 07:06:19 Get A/D value=-858993460 result=40 07:06:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:19 Aux= 07:06:19 Message to Camera, serial 43343 queued 07:06:56 Received message from Master: op=PointingHead serial=43356 07:06:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:06:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:06:56 Point started: ret=0 07:06:56 point_skyscan result=0 07:06:57 Check angles 07:06:57 SkyScan query 07:06:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:06:57 Message to Master queued w/err=0: serial=43356 error=0 07:07:02 Received message from Master: op=Filter serial=43357 07:07:02 Color wheel filter change from 0 to 0 07:07:02 FLIGetFilterPos err=0 currentPosition=0 07:07:02 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:02 Filter is already there-color wheel unchanged 07:07:03 Received message from Master: op=Shutter serial=43358 07:07:03 Shutter LASER close 07:07:03 Received message from Camera: op=State serial=43360 07:07:03 GetSingleValue result=40 Value=cccccccc 07:07:03 SkyScan query 07:07:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:07:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:03 Parameters OK 07:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:03 Set A/D data flow result=40 07:07:03 Set A/D channel type result=40 07:07:03 Set A/D encoding result=40 07:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:03 Set channel filter=0.000000e+000 result=40 07:07:03 Config A/D Result=40 07:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:03 Get A/D filter: -9.255963e+061 result=40 07:07:03 Get A/D value=-858993460 result=40 07:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:03 Parameters OK 07:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:03 Set A/D data flow result=40 07:07:03 Set A/D channel type result=40 07:07:03 Set A/D encoding result=40 07:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:03 Set channel filter=0.000000e+000 result=40 07:07:03 Config A/D Result=40 07:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:03 Get A/D filter: -9.255963e+061 result=40 07:07:03 Get A/D value=-858993460 result=40 07:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:03 Aux= 07:07:03 Message to Camera, serial 43360 queued 07:07:39 Received message from Master: op=PointingHead serial=43372 07:07:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:07:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:07:39 Point started: ret=0 07:07:39 point_skyscan result=0 07:07:40 Check angles 07:07:40 SkyScan query 07:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:07:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:07:41 Message to Master queued w/err=0: serial=43372 error=0 07:07:46 Received message from Master: op=Filter serial=43373 07:07:46 Color wheel filter change from 0 to 0 07:07:46 FLIGetFilterPos err=0 currentPosition=0 07:07:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:46 Filter is already there-color wheel unchanged 07:07:46 Received message from Master: op=Shutter serial=43374 07:07:46 Shutter LASER close 07:07:46 Received message from Camera: op=State serial=43376 07:07:46 GetSingleValue result=40 Value=cccccccc 07:07:46 SkyScan query 07:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:07:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:46 Parameters OK 07:07:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:46 Set A/D data flow result=40 07:07:46 Set A/D channel type result=40 07:07:46 Set A/D encoding result=40 07:07:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:46 Set channel filter=0.000000e+000 result=40 07:07:46 Config A/D Result=40 07:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:46 Get A/D filter: -9.255963e+061 result=40 07:07:46 Get A/D value=-858993460 result=40 07:07:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:46 Parameters OK 07:07:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:46 Set A/D data flow result=40 07:07:46 Set A/D channel type result=40 07:07:46 Set A/D encoding result=40 07:07:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:46 Set channel filter=0.000000e+000 result=40 07:07:46 Config A/D Result=40 07:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:46 Get A/D filter: -9.255963e+061 result=40 07:07:46 Get A/D value=-858993460 result=40 07:07:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:46 Aux= 07:07:46 Message to Camera, serial 43376 queued 07:08:23 Received message from Master: op=PointingHead serial=43389 07:08:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:08:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:08:24 Point started: ret=0 07:08:24 point_skyscan result=0 07:08:24 Check angles 07:08:24 SkyScan query 07:08:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:08:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:08:25 Message to Master queued w/err=0: serial=43389 error=0 07:08:30 Received message from Master: op=Filter serial=43390 07:08:30 Color wheel filter change from 0 to 0 07:08:30 FLIGetFilterPos err=0 currentPosition=0 07:08:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:30 Filter is already there-color wheel unchanged 07:08:30 Received message from Master: op=Shutter serial=43391 07:08:30 Shutter LASER close 07:08:30 Received message from Camera: op=State serial=43393 07:08:30 GetSingleValue result=40 Value=cccccccc 07:08:30 SkyScan query 07:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:08:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:31 Parameters OK 07:08:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:31 Set A/D data flow result=40 07:08:31 Set A/D channel type result=40 07:08:31 Set A/D encoding result=40 07:08:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:31 Set channel filter=0.000000e+000 result=40 07:08:31 Config A/D Result=40 07:08:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:31 Get A/D filter: -9.255963e+061 result=40 07:08:31 Get A/D value=-858993460 result=40 07:08:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:31 Parameters OK 07:08:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:31 Set A/D data flow result=40 07:08:31 Set A/D channel type result=40 07:08:31 Set A/D encoding result=40 07:08:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:31 Set channel filter=0.000000e+000 result=40 07:08:31 Config A/D Result=40 07:08:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:31 Get A/D filter: -9.255963e+061 result=40 07:08:31 Get A/D value=-858993460 result=40 07:08:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:31 Aux= 07:08:31 Message to Camera, serial 43393 queued 07:09:08 Received message from Master: op=PointingHead serial=43406 07:09:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:09:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:09:08 Point started: ret=0 07:09:08 point_skyscan result=0 07:09:09 Check angles 07:09:09 SkyScan query 07:09:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 07:09:09 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 07:09:09 Check angles 07:09:09 SkyScan query 07:09:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.895<-14993 Statuses=0008 0009 07:09:10 Msec=750 True Az=112.995 Ze=-44.895 Az status=0008 Ze status=0009 07:09:10 Check angles 07:09:10 SkyScan query 07:09:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 07:09:11 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 07:09:11 Check angles 07:09:11 SkyScan query 07:09:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 07:09:12 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 07:09:12 Check angles 07:09:12 SkyScan query 07:09:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.165<-19211 Statuses=0008 0009 07:09:12 Msec=3000 True Az=112.995 Ze=-108.165 Az status=0008 Ze status=0009 07:09:12 Check angles 07:09:12 SkyScan query 07:09:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.12<-20608 Statuses=0008 0009 07:09:13 Msec=3750 True Az=112.995 Ze=-129.12 Az status=0008 Ze status=0009 07:09:13 Check angles 07:09:13 SkyScan query 07:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.105<-22007 Statuses=0008 0009 07:09:14 Msec=4500 True Az=112.995 Ze=-150.105 Az status=0008 Ze status=0009 07:09:14 Check angles 07:09:14 SkyScan query 07:09:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.27<-23418 Statuses=0008 0009 07:09:15 Msec=5250 True Az=112.995 Ze=-171.27 Az status=0008 Ze status=0009 07:09:15 Check angles 07:09:15 SkyScan query 07:09:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:09:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:09:15 Message to Master queued w/err=0: serial=43406 error=0 07:09:20 Received message from Master: op=Filter serial=43407 07:09:20 Color wheel filter change from 0 to 0 07:09:20 FLIGetFilterPos err=0 currentPosition=0 07:09:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:20 Filter is already there-color wheel unchanged 07:09:20 Received message from Master: op=Shutter serial=43408 07:09:20 Shutter LASER open 07:09:21 Received message from Camera: op=State serial=43410 07:09:21 GetSingleValue result=40 Value=cccccccc 07:09:21 SkyScan query 07:09:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:09:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:21 Parameters OK 07:09:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:21 Set A/D data flow result=40 07:09:21 Set A/D channel type result=40 07:09:21 Set A/D encoding result=40 07:09:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:21 Set channel filter=0.000000e+000 result=40 07:09:21 Config A/D Result=40 07:09:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:21 Get A/D filter: -9.255963e+061 result=40 07:09:21 Get A/D value=-858993460 result=40 07:09:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:21 Parameters OK 07:09:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:21 Set A/D data flow result=40 07:09:21 Set A/D channel type result=40 07:09:21 Set A/D encoding result=40 07:09:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:21 Set channel filter=0.000000e+000 result=40 07:09:21 Config A/D Result=40 07:09:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:21 Get A/D filter: -9.255963e+061 result=40 07:09:21 Get A/D value=-858993460 result=40 07:09:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:21 Aux= 07:09:21 Message to Camera, serial 43410 queued 07:09:30 Received message from Master: op=Shutter serial=43420 07:09:30 Shutter LASER close 07:09:30 Received message from Master: op=PointingHead serial=43424 07:09:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:09:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:09:31 Point started: ret=0 07:09:31 point_skyscan result=0 07:09:31 Check angles 07:09:31 SkyScan query 07:09:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 07:09:32 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 07:09:32 Check angles 07:09:32 SkyScan query 07:09:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.905<-20127 Statuses=0008 0009 07:09:33 Msec=750 True Az=112.995 Ze=-121.905 Az status=0008 Ze status=0009 07:09:33 Check angles 07:09:33 SkyScan query 07:09:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 07:09:33 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 07:09:34 Check angles 07:09:34 SkyScan query 07:09:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 07:09:34 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 07:09:34 Check angles 07:09:34 SkyScan query 07:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 07:09:35 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 07:09:35 Check angles 07:09:35 SkyScan query 07:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.1<-14540 Statuses=0008 0009 07:09:36 Msec=3750 True Az=112.995 Ze=-38.1 Az status=0008 Ze status=0009 07:09:36 Check angles 07:09:36 SkyScan query 07:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.16<-13144 Statuses=0008 0009 07:09:36 Msec=4500 True Az=112.995 Ze=-17.16 Az status=0008 Ze status=0009 07:09:37 Check angles 07:09:37 SkyScan query 07:09:37 SkyScan query done: ret=0 az=112.995<-7533 ze=3.81<-11746 Statuses=0008 0009 07:09:37 Msec=5250 True Az=112.995 Ze=3.81 Az status=0008 Ze status=0009 07:09:37 Check angles 07:09:37 SkyScan query 07:09:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:09:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:09:38 Message to Master queued w/err=0: serial=43424 error=0 07:09:43 Received message from Master: op=Filter serial=43425 07:09:43 Color wheel filter change from 0 to 0 07:09:43 FLIGetFilterPos err=0 currentPosition=0 07:09:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:43 Filter is already there-color wheel unchanged 07:09:43 Received message from Master: op=Shutter serial=43426 07:09:43 Shutter LASER close 07:09:43 Received message from Camera: op=State serial=43428 07:09:43 GetSingleValue result=40 Value=cccccccc 07:09:43 SkyScan query 07:09:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:09:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:44 Parameters OK 07:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:44 Set A/D data flow result=40 07:09:44 Set A/D channel type result=40 07:09:44 Set A/D encoding result=40 07:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:44 Set channel filter=0.000000e+000 result=40 07:09:44 Config A/D Result=40 07:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:44 Get A/D filter: -9.255963e+061 result=40 07:09:44 Get A/D value=-858993460 result=40 07:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:44 Parameters OK 07:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:44 Set A/D data flow result=40 07:09:44 Set A/D channel type result=40 07:09:44 Set A/D encoding result=40 07:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:44 Set channel filter=0.000000e+000 result=40 07:09:44 Config A/D Result=40 07:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:44 Get A/D filter: -9.255963e+061 result=40 07:09:44 Get A/D value=-858993460 result=40 07:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:44 Aux= 07:09:44 Message to Camera, serial 43428 queued 07:10:21 Received message from Master: op=PointingHead serial=43441 07:10:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:10:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:10:21 Point started: ret=0 07:10:21 point_skyscan result=0 07:10:22 Check angles 07:10:22 SkyScan query 07:10:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:10:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:10:22 Message to Master queued w/err=0: serial=43441 error=0 07:10:27 Received message from Master: op=Filter serial=43442 07:10:27 Color wheel filter change from 0 to 0 07:10:27 FLIGetFilterPos err=0 currentPosition=0 07:10:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:27 Filter is already there-color wheel unchanged 07:10:28 Received message from Master: op=Shutter serial=43443 07:10:28 Shutter LASER close 07:10:28 Received message from Camera: op=State serial=43445 07:10:28 GetSingleValue result=40 Value=cccccccc 07:10:28 SkyScan query 07:10:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:10:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:28 Parameters OK 07:10:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:28 Set A/D data flow result=40 07:10:28 Set A/D channel type result=40 07:10:28 Set A/D encoding result=40 07:10:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:28 Set channel filter=0.000000e+000 result=40 07:10:28 Config A/D Result=40 07:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:28 Get A/D filter: -9.255963e+061 result=40 07:10:28 Get A/D value=-858993460 result=40 07:10:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:28 Parameters OK 07:10:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:28 Set A/D data flow result=40 07:10:28 Set A/D channel type result=40 07:10:28 Set A/D encoding result=40 07:10:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:28 Set channel filter=0.000000e+000 result=40 07:10:28 Config A/D Result=40 07:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:28 Get A/D filter: -9.255963e+061 result=40 07:10:28 Get A/D value=-858993460 result=40 07:10:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:28 Aux= 07:10:28 Message to Camera, serial 43445 queued 07:11:05 Received message from Master: op=PointingHead serial=43458 07:11:05 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:11:05 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:11:05 Point started: ret=0 07:11:05 point_skyscan result=0 07:11:06 Check angles 07:11:06 SkyScan query 07:11:07 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 07:11:07 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 07:11:07 Check angles 07:11:07 SkyScan query 07:11:07 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.495<-12433 Statuses=0009 0008 07:11:07 Msec=750 True Az=153.345 Ze=-6.495 Az status=0009 Ze status=0008 07:11:08 Check angles 07:11:08 SkyScan query 07:11:08 SkyScan query done: ret=0 az=170.835<-11389 ze=-6.495<-12433 Statuses=0009 0008 07:11:08 Msec=1500 True Az=170.835 Ze=-6.495 Az status=0009 Ze status=0008 07:11:08 Check angles 07:11:08 SkyScan query 07:11:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:11:09 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:11:09 Message to Master queued w/err=0: serial=43458 error=0 07:11:14 Received message from Master: op=Filter serial=43459 07:11:14 Color wheel filter change from 0 to 0 07:11:14 FLIGetFilterPos err=0 currentPosition=0 07:11:14 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:14 Filter is already there-color wheel unchanged 07:11:14 Received message from Master: op=Shutter serial=43460 07:11:14 Shutter LASER close 07:11:14 Received message from Camera: op=State serial=43462 07:11:14 GetSingleValue result=40 Value=cccccccc 07:11:14 SkyScan query 07:11:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:11:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:15 Parameters OK 07:11:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:15 Set A/D data flow result=40 07:11:15 Set A/D channel type result=40 07:11:15 Set A/D encoding result=40 07:11:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:15 Set channel filter=0.000000e+000 result=40 07:11:15 Config A/D Result=40 07:11:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:15 Get A/D filter: -9.255963e+061 result=40 07:11:15 Get A/D value=-858993460 result=40 07:11:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:15 Parameters OK 07:11:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:15 Set A/D data flow result=40 07:11:15 Set A/D channel type result=40 07:11:15 Set A/D encoding result=40 07:11:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:15 Set channel filter=0.000000e+000 result=40 07:11:15 Config A/D Result=40 07:11:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:15 Get A/D filter: -9.255963e+061 result=40 07:11:15 Get A/D value=-858993460 result=40 07:11:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:15 Aux= 07:11:15 Message to Camera, serial 43462 queued 07:11:52 Received message from Master: op=PointingHead serial=43475 07:11:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:11:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:11:52 Point started: ret=0 07:11:52 point_skyscan result=0 07:11:53 Check angles 07:11:53 SkyScan query 07:11:53 SkyScan query done: ret=0 az=152.67<-10178 ze=6.51<-11566 Statuses=0009 0008 07:11:53 Msec=0 True Az=152.67 Ze=6.51 Az status=0009 Ze status=0008 07:11:53 Check angles 07:11:53 SkyScan query 07:11:54 SkyScan query done: ret=0 az=134.97<-8998 ze=6.495<-11567 Statuses=0009 0008 07:11:54 Msec=750 True Az=134.97 Ze=6.495 Az status=0009 Ze status=0008 07:11:54 Check angles 07:11:54 SkyScan query 07:11:55 SkyScan query done: ret=0 az=117.345<-7823 ze=6.495<-11567 Statuses=0009 0008 07:11:55 Msec=1500 True Az=117.345 Ze=6.495 Az status=0009 Ze status=0008 07:11:55 Check angles 07:11:55 SkyScan query 07:11:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:11:55 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:11:55 Message to Master queued w/err=0: serial=43475 error=0 07:12:00 Received message from Master: op=Filter serial=43476 07:12:00 Color wheel filter change from 0 to 0 07:12:00 FLIGetFilterPos err=0 currentPosition=0 07:12:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:00 Filter is already there-color wheel unchanged 07:12:01 Received message from Master: op=Shutter serial=43477 07:12:01 Shutter LASER close 07:12:01 Received message from Camera: op=State serial=43479 07:12:01 GetSingleValue result=40 Value=cccccccc 07:12:01 SkyScan query 07:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:12:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:01 Parameters OK 07:12:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:01 Set A/D data flow result=40 07:12:01 Set A/D channel type result=40 07:12:01 Set A/D encoding result=40 07:12:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:01 Set channel filter=0.000000e+000 result=40 07:12:01 Config A/D Result=40 07:12:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:01 Get A/D filter: -9.255963e+061 result=40 07:12:01 Get A/D value=-858993460 result=40 07:12:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:01 Parameters OK 07:12:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:01 Set A/D data flow result=40 07:12:01 Set A/D channel type result=40 07:12:01 Set A/D encoding result=40 07:12:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:01 Set channel filter=0.000000e+000 result=40 07:12:01 Config A/D Result=40 07:12:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:01 Get A/D filter: -9.255963e+061 result=40 07:12:01 Get A/D value=-858993460 result=40 07:12:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:01 Aux= 07:12:01 Message to Camera, serial 43479 queued 07:12:38 Received message from Master: op=PointingHead serial=43492 07:12:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:12:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:12:38 Point started: ret=0 07:12:38 point_skyscan result=0 07:12:39 Check angles 07:12:39 SkyScan query 07:12:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 07:12:40 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 07:12:40 Check angles 07:12:40 SkyScan query 07:12:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 07:12:41 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 07:12:41 Check angles 07:12:41 SkyScan query 07:12:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 07:12:41 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 07:12:41 Check angles 07:12:41 SkyScan query 07:12:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 07:12:42 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 07:12:42 Check angles 07:12:42 SkyScan query 07:12:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.82<-19188 Statuses=0008 0009 07:12:43 Msec=3000 True Az=112.995 Ze=-107.82 Az status=0008 Ze status=0009 07:12:43 Check angles 07:12:43 SkyScan query 07:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.76<-20584 Statuses=0008 0009 07:12:44 Msec=3750 True Az=112.995 Ze=-128.76 Az status=0008 Ze status=0009 07:12:44 Check angles 07:12:44 SkyScan query 07:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 07:12:44 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 07:12:44 Check angles 07:12:44 SkyScan query 07:12:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 07:12:45 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 07:12:45 Check angles 07:12:45 SkyScan query 07:12:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:12:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:12:46 Message to Master queued w/err=0: serial=43492 error=0 07:12:51 Received message from Master: op=Filter serial=43493 07:12:51 Color wheel filter change from 0 to 0 07:12:51 FLIGetFilterPos err=0 currentPosition=0 07:12:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:51 Filter is already there-color wheel unchanged 07:12:51 Received message from Master: op=Shutter serial=43494 07:12:51 Shutter LASER open 07:12:51 Received message from Camera: op=State serial=43496 07:12:51 GetSingleValue result=40 Value=cccccccc 07:12:51 SkyScan query 07:12:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:12:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:52 Parameters OK 07:12:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:52 Set A/D data flow result=40 07:12:52 Set A/D channel type result=40 07:12:52 Set A/D encoding result=40 07:12:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:52 Set channel filter=0.000000e+000 result=40 07:12:52 Config A/D Result=40 07:12:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:52 Get A/D filter: -9.255963e+061 result=40 07:12:52 Get A/D value=-858993460 result=40 07:12:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:52 Parameters OK 07:12:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:52 Set A/D data flow result=40 07:12:52 Set A/D channel type result=40 07:12:52 Set A/D encoding result=40 07:12:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:52 Set channel filter=0.000000e+000 result=40 07:12:52 Config A/D Result=40 07:12:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:52 Get A/D filter: -9.255963e+061 result=40 07:12:52 Get A/D value=-858993460 result=40 07:12:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:52 Aux= 07:12:52 Message to Camera, serial 43496 queued 07:13:00 Received message from Master: op=Shutter serial=43506 07:13:00 Shutter LASER close 07:13:01 Received message from Master: op=PointingHead serial=43510 07:13:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:13:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:13:01 Point started: ret=0 07:13:01 point_skyscan result=0 07:13:02 Check angles 07:13:02 SkyScan query 07:13:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 07:13:02 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 07:13:02 Check angles 07:13:02 SkyScan query 07:13:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 07:13:03 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 07:13:03 Check angles 07:13:03 SkyScan query 07:13:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 07:13:04 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 07:13:04 Check angles 07:13:04 SkyScan query 07:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 07:13:05 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 07:13:05 Check angles 07:13:05 SkyScan query 07:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 07:13:05 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 07:13:05 Check angles 07:13:05 SkyScan query 07:13:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 07:13:06 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 07:13:06 Check angles 07:13:06 SkyScan query 07:13:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.65<-13110 Statuses=0008 0009 07:13:07 Msec=4500 True Az=112.995 Ze=-16.65 Az status=0008 Ze status=0009 07:13:07 Check angles 07:13:07 SkyScan query 07:13:08 SkyScan query done: ret=0 az=112.995<-7533 ze=4.26<-11716 Statuses=0008 0009 07:13:08 Msec=5250 True Az=112.995 Ze=4.26 Az status=0008 Ze status=0009 07:13:08 Check angles 07:13:08 SkyScan query 07:13:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:13:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:13:08 Message to Master queued w/err=0: serial=43510 error=0 07:13:13 Received message from Master: op=Filter serial=43511 07:13:13 Color wheel filter change from 0 to 0 07:13:13 FLIGetFilterPos err=0 currentPosition=0 07:13:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:13 Filter is already there-color wheel unchanged 07:13:13 Received message from Master: op=Shutter serial=43512 07:13:13 Shutter LASER close 07:13:14 Received message from Camera: op=State serial=43514 07:13:14 GetSingleValue result=40 Value=cccccccc 07:13:14 SkyScan query 07:13:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:14 Parameters OK 07:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:14 Set A/D data flow result=40 07:13:14 Set A/D channel type result=40 07:13:14 Set A/D encoding result=40 07:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:14 Set channel filter=0.000000e+000 result=40 07:13:14 Config A/D Result=40 07:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:14 Get A/D filter: -9.255963e+061 result=40 07:13:14 Get A/D value=-858993460 result=40 07:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:14 Parameters OK 07:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:14 Set A/D data flow result=40 07:13:14 Set A/D channel type result=40 07:13:14 Set A/D encoding result=40 07:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:14 Set channel filter=0.000000e+000 result=40 07:13:14 Config A/D Result=40 07:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:14 Get A/D filter: -9.255963e+061 result=40 07:13:14 Get A/D value=-858993460 result=40 07:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:14 Aux= 07:13:14 Message to Camera, serial 43514 queued 07:13:51 Received message from Master: op=PointingHead serial=43527 07:13:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:13:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:13:51 Point started: ret=0 07:13:51 point_skyscan result=0 07:13:52 Check angles 07:13:52 SkyScan query 07:13:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:13:53 Message to Master queued w/err=0: serial=43527 error=0 07:13:58 Received message from Master: op=Filter serial=43528 07:13:58 Color wheel filter change from 0 to 0 07:13:58 FLIGetFilterPos err=0 currentPosition=0 07:13:58 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:58 Filter is already there-color wheel unchanged 07:13:58 Received message from Master: op=Shutter serial=43529 07:13:58 Shutter LASER close 07:13:58 Received message from Camera: op=State serial=43531 07:13:58 GetSingleValue result=40 Value=cccccccc 07:13:58 SkyScan query 07:13:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:58 Parameters OK 07:13:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:58 Set A/D data flow result=40 07:13:58 Set A/D channel type result=40 07:13:58 Set A/D encoding result=40 07:13:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:58 Set channel filter=0.000000e+000 result=40 07:13:58 Config A/D Result=40 07:13:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:58 Get A/D filter: -9.255963e+061 result=40 07:13:58 Get A/D value=-858993460 result=40 07:13:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:58 Parameters OK 07:13:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:58 Set A/D data flow result=40 07:13:58 Set A/D channel type result=40 [UTC 2019-3-1 07:13:58] 07:13:58 Set A/D encoding result=40 07:13:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:59 Set channel filter=0.000000e+000 result=40 07:13:59 Config A/D Result=40 07:13:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:59 Get A/D filter: -9.255963e+061 result=40 07:13:59 Get A/D value=-858993460 result=40 07:13:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:59 Aux= 07:13:59 Message to Camera, serial 43531 queued 07:14:35 Received message from Master: op=PointingHead serial=43544 07:14:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:14:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:14:36 Point started: ret=0 07:14:36 point_skyscan result=0 07:14:36 Check angles 07:14:36 SkyScan query 07:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:14:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:14:37 Message to Master queued w/err=0: serial=43544 error=0 07:14:42 Received message from Master: op=Filter serial=43545 07:14:42 Color wheel filter change from 0 to 0 07:14:42 FLIGetFilterPos err=0 currentPosition=0 07:14:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:42 Filter is already there-color wheel unchanged 07:14:42 Received message from Master: op=Shutter serial=43546 07:14:42 Shutter LASER close 07:14:42 Received message from Camera: op=State serial=43548 07:14:42 GetSingleValue result=40 Value=cccccccc 07:14:42 SkyScan query 07:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:14:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:43 Parameters OK 07:14:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:43 Set A/D data flow result=40 07:14:43 Set A/D channel type result=40 07:14:43 Set A/D encoding result=40 07:14:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:43 Set channel filter=0.000000e+000 result=40 07:14:43 Config A/D Result=40 07:14:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:43 Get A/D filter: -9.255963e+061 result=40 07:14:43 Get A/D value=-858993460 result=40 07:14:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:43 Parameters OK 07:14:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:43 Set A/D data flow result=40 07:14:43 Set A/D channel type result=40 07:14:43 Set A/D encoding result=40 07:14:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:43 Set channel filter=0.000000e+000 result=40 07:14:43 Config A/D Result=40 07:14:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:43 Get A/D filter: -9.255963e+061 result=40 07:14:43 Get A/D value=-858993460 result=40 07:14:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:43 Aux= 07:14:43 Message to Camera, serial 43548 queued 07:15:20 Received message from Master: op=PointingHead serial=43561 07:15:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:15:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:15:20 Point started: ret=0 07:15:20 point_skyscan result=0 07:15:21 Check angles 07:15:21 SkyScan query 07:15:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:15:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:15:21 Message to Master queued w/err=0: serial=43561 error=0 07:15:26 Received message from Master: op=Filter serial=43562 07:15:26 Color wheel filter change from 0 to 0 07:15:26 FLIGetFilterPos err=0 currentPosition=0 07:15:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:26 Filter is already there-color wheel unchanged 07:15:27 Received message from Master: op=Shutter serial=43563 07:15:27 Shutter LASER close 07:15:27 Received message from Camera: op=State serial=43565 07:15:27 GetSingleValue result=40 Value=cccccccc 07:15:27 SkyScan query 07:15:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:15:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:27 Parameters OK 07:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:27 Set A/D data flow result=40 07:15:27 Set A/D channel type result=40 07:15:27 Set A/D encoding result=40 07:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:27 Set channel filter=0.000000e+000 result=40 07:15:27 Config A/D Result=40 07:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:27 Get A/D filter: -9.255963e+061 result=40 07:15:27 Get A/D value=-858993460 result=40 07:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:27 Parameters OK 07:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:27 Set A/D data flow result=40 07:15:27 Set A/D channel type result=40 07:15:27 Set A/D encoding result=40 07:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:27 Set channel filter=0.000000e+000 result=40 07:15:27 Config A/D Result=40 07:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:27 Get A/D filter: -9.255963e+061 result=40 07:15:27 Get A/D value=-858993460 result=40 07:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:27 Aux= 07:15:27 Message to Camera, serial 43565 queued 07:16:04 Received message from Master: op=PointingHead serial=43578 07:16:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:16:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:16:04 Point started: ret=0 07:16:04 point_skyscan result=0 07:16:05 Check angles 07:16:05 SkyScan query 07:16:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 07:16:06 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 07:16:06 Check angles 07:16:06 SkyScan query 07:16:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 07:16:06 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 07:16:07 Check angles 07:16:07 SkyScan query 07:16:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 07:16:07 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 07:16:07 Check angles 07:16:07 SkyScan query 07:16:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 07:16:08 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 07:16:08 Check angles 07:16:08 SkyScan query 07:16:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.58<-19172 Statuses=0008 0009 07:16:09 Msec=3000 True Az=112.995 Ze=-107.58 Az status=0008 Ze status=0009 07:16:09 Check angles 07:16:09 SkyScan query 07:16:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.52<-20568 Statuses=0008 0009 07:16:09 Msec=3750 True Az=112.995 Ze=-128.52 Az status=0008 Ze status=0009 07:16:10 Check angles 07:16:10 SkyScan query 07:16:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.49<-21966 Statuses=0008 0009 07:16:10 Msec=4500 True Az=112.995 Ze=-149.49 Az status=0008 Ze status=0009 07:16:10 Check angles 07:16:10 SkyScan query 07:16:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.43<-23362 Statuses=0008 0009 07:16:11 Msec=5250 True Az=112.995 Ze=-170.43 Az status=0008 Ze status=0009 07:16:11 Check angles 07:16:11 SkyScan query 07:16:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:16:12 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:16:12 Message to Master queued w/err=0: serial=43578 error=0 07:16:17 Received message from Master: op=Filter serial=43579 07:16:17 Color wheel filter change from 0 to 0 07:16:17 FLIGetFilterPos err=0 currentPosition=0 07:16:17 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:17 Filter is already there-color wheel unchanged 07:16:17 Received message from Master: op=Shutter serial=43580 07:16:17 Shutter LASER open 07:16:17 Received message from Camera: op=State serial=43582 07:16:17 GetSingleValue result=40 Value=cccccccc 07:16:17 SkyScan query 07:16:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:16:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:18 Parameters OK 07:16:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:18 Set A/D data flow result=40 07:16:18 Set A/D channel type result=40 07:16:18 Set A/D encoding result=40 07:16:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:18 Set channel filter=0.000000e+000 result=40 07:16:18 Config A/D Result=40 07:16:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:18 Get A/D filter: -9.255963e+061 result=40 07:16:18 Get A/D value=-858993460 result=40 07:16:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:18 Parameters OK 07:16:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:18 Set A/D data flow result=40 07:16:18 Set A/D channel type result=40 07:16:18 Set A/D encoding result=40 07:16:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:18 Set channel filter=0.000000e+000 result=40 07:16:18 Config A/D Result=40 07:16:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:18 Get A/D filter: -9.255963e+061 result=40 07:16:18 Get A/D value=-858993460 result=40 07:16:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:18 Aux= 07:16:18 Message to Camera, serial 43582 queued 07:16:26 Received message from Master: op=Shutter serial=43592 07:16:26 Shutter LASER close 07:16:27 Received message from Master: op=PointingHead serial=43596 07:16:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:16:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:16:27 Point started: ret=0 07:16:27 point_skyscan result=0 07:16:28 Check angles 07:16:28 SkyScan query 07:16:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 07:16:28 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 07:16:28 Check angles 07:16:28 SkyScan query 07:16:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 07:16:29 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 07:16:29 Check angles 07:16:29 SkyScan query 07:16:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 07:16:30 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 07:16:30 Check angles 07:16:30 SkyScan query 07:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 07:16:31 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 07:16:31 Check angles 07:16:31 SkyScan query 07:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 07:16:31 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 07:16:31 Check angles 07:16:31 SkyScan query 07:16:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.235<-14549 Statuses=0008 0009 07:16:32 Msec=3750 True Az=112.995 Ze=-38.235 Az status=0008 Ze status=0009 07:16:32 Check angles 07:16:32 SkyScan query 07:16:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 07:16:33 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 07:16:33 Check angles 07:16:33 SkyScan query 07:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=3.66<-11756 Statuses=0008 0009 07:16:34 Msec=5250 True Az=112.995 Ze=3.66 Az status=0008 Ze status=0009 07:16:34 Check angles 07:16:34 SkyScan query 07:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:16:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:16:34 Message to Master queued w/err=0: serial=43596 error=0 07:16:39 Received message from Master: op=Filter serial=43597 07:16:39 Color wheel filter change from 0 to 0 07:16:39 FLIGetFilterPos err=0 currentPosition=0 07:16:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:39 Filter is already there-color wheel unchanged 07:16:39 Received message from Master: op=Shutter serial=43598 07:16:39 Shutter LASER close 07:16:40 Received message from Camera: op=State serial=43600 07:16:40 GetSingleValue result=40 Value=cccccccc 07:16:40 SkyScan query 07:16:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:16:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:40 Parameters OK 07:16:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:40 Set A/D data flow result=40 07:16:40 Set A/D channel type result=40 07:16:40 Set A/D encoding result=40 07:16:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:40 Set channel filter=0.000000e+000 result=40 07:16:40 Config A/D Result=40 07:16:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:40 Get A/D filter: -9.255963e+061 result=40 07:16:40 Get A/D value=-858993460 result=40 07:16:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:40 Parameters OK 07:16:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:40 Set A/D data flow result=40 07:16:40 Set A/D channel type result=40 07:16:40 Set A/D encoding result=40 07:16:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:40 Set channel filter=0.000000e+000 result=40 07:16:40 Config A/D Result=40 07:16:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:40 Get A/D filter: -9.255963e+061 result=40 07:16:40 Get A/D value=-858993460 result=40 07:16:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:40 Aux= 07:16:40 Message to Camera, serial 43600 queued 07:17:17 Received message from Master: op=PointingHead serial=43613 07:17:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:17:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:17:17 Point started: ret=0 07:17:17 point_skyscan result=0 07:17:18 Check angles 07:17:18 SkyScan query 07:17:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:17:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:17:19 Message to Master queued w/err=0: serial=43613 error=0 07:17:24 Received message from Master: op=Filter serial=43614 07:17:24 Color wheel filter change from 0 to 0 07:17:24 FLIGetFilterPos err=0 currentPosition=0 07:17:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:24 Filter is already there-color wheel unchanged 07:17:24 Received message from Master: op=Shutter serial=43615 07:17:24 Shutter LASER close 07:17:24 Received message from Camera: op=State serial=43617 07:17:24 GetSingleValue result=40 Value=cccccccc 07:17:24 SkyScan query 07:17:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:17:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:25 Parameters OK 07:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:25 Set A/D data flow result=40 07:17:25 Set A/D channel type result=40 07:17:25 Set A/D encoding result=40 07:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:25 Set channel filter=0.000000e+000 result=40 07:17:25 Config A/D Result=40 07:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:25 Get A/D filter: -9.255963e+061 result=40 07:17:25 Get A/D value=-858993460 result=40 07:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:25 Parameters OK 07:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:25 Set A/D data flow result=40 07:17:25 Set A/D channel type result=40 07:17:25 Set A/D encoding result=40 07:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:25 Set channel filter=0.000000e+000 result=40 07:17:25 Config A/D Result=40 07:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:25 Get A/D filter: -9.255963e+061 result=40 07:17:25 Get A/D value=-858993460 result=40 07:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:25 Aux= 07:17:25 Message to Camera, serial 43617 queued 07:18:01 Received message from Master: op=PointingHead serial=43630 07:18:01 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:18:01 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:18:02 Point started: ret=0 07:18:02 point_skyscan result=0 07:18:02 Check angles 07:18:02 SkyScan query 07:18:03 SkyScan query done: ret=0 az=135.795<-9053 ze=-6.51<-12434 Statuses=0009 0008 07:18:03 Msec=0 True Az=135.795 Ze=-6.51 Az status=0009 Ze status=0008 07:18:03 Check angles 07:18:03 SkyScan query 07:18:04 SkyScan query done: ret=0 az=153.36<-10224 ze=-6.495<-12433 Statuses=0009 0008 07:18:04 Msec=750 True Az=153.36 Ze=-6.495 Az status=0009 Ze status=0008 07:18:04 Check angles 07:18:04 SkyScan query 07:18:05 SkyScan query done: ret=0 az=170.775<-11385 ze=-6.495<-12433 Statuses=0009 0008 07:18:05 Msec=1500 True Az=170.775 Ze=-6.495 Az status=0009 Ze status=0008 07:18:05 Check angles 07:18:05 SkyScan query 07:18:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:18:05 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:18:05 Message to Master queued w/err=0: serial=43630 error=0 07:18:10 Received message from Master: op=Filter serial=43631 07:18:10 Color wheel filter change from 0 to 0 07:18:10 FLIGetFilterPos err=0 currentPosition=0 07:18:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:10 Filter is already there-color wheel unchanged 07:18:10 Received message from Master: op=Shutter serial=43632 07:18:10 Shutter LASER close 07:18:11 Received message from Camera: op=State serial=43634 07:18:11 GetSingleValue result=40 Value=cccccccc 07:18:11 SkyScan query 07:18:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:18:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:11 Parameters OK 07:18:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:11 Set A/D data flow result=40 07:18:11 Set A/D channel type result=40 07:18:11 Set A/D encoding result=40 07:18:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:11 Set channel filter=0.000000e+000 result=40 07:18:11 Config A/D Result=40 07:18:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:11 Get A/D filter: -9.255963e+061 result=40 07:18:11 Get A/D value=-858993460 result=40 07:18:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:11 Parameters OK 07:18:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:11 Set A/D data flow result=40 07:18:11 Set A/D channel type result=40 07:18:11 Set A/D encoding result=40 07:18:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:11 Set channel filter=0.000000e+000 result=40 07:18:11 Config A/D Result=40 07:18:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:11 Get A/D filter: -9.255963e+061 result=40 07:18:11 Get A/D value=-858993460 result=40 07:18:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:11 Aux= 07:18:11 Message to Camera, serial 43634 queued 07:18:48 Received message from Master: op=PointingHead serial=43647 07:18:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:18:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:18:48 Point started: ret=0 07:18:48 point_skyscan result=0 07:18:49 Check angles 07:18:49 SkyScan query 07:18:50 SkyScan query done: ret=0 az=153.18<-10212 ze=6.51<-11566 Statuses=0009 0008 07:18:50 Msec=0 True Az=153.18 Ze=6.51 Az status=0009 Ze status=0008 07:18:50 Check angles 07:18:50 SkyScan query 07:18:50 SkyScan query done: ret=0 az=135.255<-9017 ze=6.495<-11567 Statuses=0009 0008 07:18:50 Msec=750 True Az=135.255 Ze=6.495 Az status=0009 Ze status=0008 07:18:51 Check angles 07:18:51 SkyScan query 07:18:51 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 07:18:51 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 07:18:51 Check angles 07:18:51 SkyScan query 07:18:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:18:52 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:18:52 Message to Master queued w/err=0: serial=43647 error=0 07:18:57 Received message from Master: op=Filter serial=43648 07:18:57 Color wheel filter change from 0 to 0 07:18:57 FLIGetFilterPos err=0 currentPosition=0 07:18:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:57 Filter is already there-color wheel unchanged 07:18:57 Received message from Master: op=Shutter serial=43649 07:18:57 Shutter LASER close 07:18:57 Received message from Camera: op=State serial=43651 07:18:57 GetSingleValue result=40 Value=cccccccc 07:18:57 SkyScan query 07:18:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:18:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:58 Parameters OK 07:18:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:58 Set A/D data flow result=40 07:18:58 Set A/D channel type result=40 07:18:58 Set A/D encoding result=40 07:18:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:58 Set channel filter=0.000000e+000 result=40 07:18:58 Config A/D Result=40 07:18:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:58 Get A/D filter: -9.255963e+061 result=40 07:18:58 Get A/D value=-858993460 result=40 07:18:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:58 Parameters OK 07:18:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:58 Set A/D data flow result=40 07:18:58 Set A/D channel type result=40 07:18:58 Set A/D encoding result=40 07:18:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:58 Set channel filter=0.000000e+000 result=40 07:18:58 Config A/D Result=40 07:18:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:58 Get A/D filter: -9.255963e+061 result=40 07:18:58 Get A/D value=-858993460 result=40 07:18:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:58 Aux= 07:18:58 Message to Camera, serial 43651 queued 07:19:35 Received message from Master: op=PointingHead serial=43664 07:19:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:19:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:19:35 Point started: ret=0 07:19:35 point_skyscan result=0 07:19:36 Check angles 07:19:36 SkyScan query 07:19:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 07:19:36 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 07:19:36 Check angles 07:19:36 SkyScan query 07:19:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.175<-14945 Statuses=0008 0009 07:19:37 Msec=750 True Az=112.995 Ze=-44.175 Az status=0008 Ze status=0009 07:19:37 Check angles 07:19:37 SkyScan query 07:19:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.115<-16341 Statuses=0008 0009 07:19:38 Msec=1500 True Az=112.995 Ze=-65.115 Az status=0008 Ze status=0009 07:19:38 Check angles 07:19:38 SkyScan query 07:19:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 07:19:38 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 07:19:39 Check angles 07:19:39 SkyScan query 07:19:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.46<-19164 Statuses=0008 0009 07:19:39 Msec=3000 True Az=112.995 Ze=-107.46 Az status=0008 Ze status=0009 07:19:39 Check angles 07:19:39 SkyScan query 07:19:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.4<-20560 Statuses=0008 0009 07:19:40 Msec=3750 True Az=112.995 Ze=-128.4 Az status=0008 Ze status=0009 07:19:40 Check angles 07:19:40 SkyScan query 07:19:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.37<-21958 Statuses=0008 0009 07:19:41 Msec=4500 True Az=112.995 Ze=-149.37 Az status=0008 Ze status=0009 07:19:41 Check angles 07:19:41 SkyScan query 07:19:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.295<-23353 Statuses=0008 0009 07:19:41 Msec=5250 True Az=112.995 Ze=-170.295 Az status=0008 Ze status=0009 07:19:42 Check angles 07:19:42 SkyScan query 07:19:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:19:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:19:42 Message to Master queued w/err=0: serial=43664 error=0 07:19:47 Received message from Master: op=Filter serial=43665 07:19:47 Color wheel filter change from 0 to 0 07:19:47 FLIGetFilterPos err=0 currentPosition=0 07:19:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:47 Filter is already there-color wheel unchanged 07:19:47 Received message from Master: op=Shutter serial=43666 07:19:47 Shutter LASER open 07:19:48 Received message from Camera: op=State serial=43668 07:19:48 GetSingleValue result=40 Value=cccccccc 07:19:48 SkyScan query 07:19:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:19:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:48 Parameters OK 07:19:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:48 Set A/D data flow result=40 07:19:48 Set A/D channel type result=40 07:19:48 Set A/D encoding result=40 07:19:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:48 Set channel filter=0.000000e+000 result=40 07:19:48 Config A/D Result=40 07:19:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:48 Get A/D filter: -9.255963e+061 result=40 07:19:48 Get A/D value=-858993460 result=40 07:19:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:48 Parameters OK 07:19:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:48 Set A/D data flow result=40 07:19:48 Set A/D channel type result=40 07:19:48 Set A/D encoding result=40 07:19:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:48 Set channel filter=0.000000e+000 result=40 07:19:48 Config A/D Result=40 07:19:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:48 Get A/D filter: -9.255963e+061 result=40 07:19:48 Get A/D value=-858993460 result=40 07:19:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:48 Aux= 07:19:48 Message to Camera, serial 43668 queued 07:19:57 Received message from Master: op=Shutter serial=43678 07:19:57 Shutter LASER close 07:19:57 Received message from Master: op=PointingHead serial=43682 07:19:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:19:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:19:57 Point started: ret=0 07:19:57 point_skyscan result=0 07:19:58 Check angles 07:19:58 SkyScan query 07:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 07:19:59 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 07:19:59 Check angles 07:19:59 SkyScan query 07:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.4<-20160 Statuses=0008 0009 07:19:59 Msec=750 True Az=112.995 Ze=-122.4 Az status=0008 Ze status=0009 07:20:00 Check angles 07:20:00 SkyScan query 07:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 07:20:00 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 07:20:00 Check angles 07:20:00 SkyScan query 07:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 07:20:01 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 07:20:01 Check angles 07:20:01 SkyScan query 07:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.52<-15968 Statuses=0008 0009 07:20:02 Msec=3000 True Az=112.995 Ze=-59.52 Az status=0008 Ze status=0009 07:20:02 Check angles 07:20:02 SkyScan query 07:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.55<-14570 Statuses=0008 0009 07:20:02 Msec=3750 True Az=112.995 Ze=-38.55 Az status=0008 Ze status=0009 07:20:03 Check angles 07:20:03 SkyScan query 07:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.595<-13173 Statuses=0008 0009 07:20:03 Msec=4500 True Az=112.995 Ze=-17.595 Az status=0008 Ze status=0009 07:20:03 Check angles 07:20:03 SkyScan query 07:20:04 SkyScan query done: ret=0 az=112.995<-7533 ze=3.36<-11776 Statuses=0008 0009 07:20:04 Msec=5250 True Az=112.995 Ze=3.36 Az status=0008 Ze status=0009 07:20:04 Check angles 07:20:04 SkyScan query 07:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:20:05 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:20:05 Message to Master queued w/err=0: serial=43682 error=0 07:20:10 Received message from Master: op=Filter serial=43683 07:20:10 Color wheel filter change from 0 to 0 07:20:10 FLIGetFilterPos err=0 currentPosition=0 07:20:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:10 Filter is already there-color wheel unchanged 07:20:10 Received message from Master: op=Shutter serial=43684 07:20:10 Shutter LASER close 07:20:10 Received message from Camera: op=State serial=43686 07:20:10 GetSingleValue result=40 Value=cccccccc 07:20:10 SkyScan query 07:20:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:11 Parameters OK 07:20:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:11 Set A/D data flow result=40 07:20:11 Set A/D channel type result=40 07:20:11 Set A/D encoding result=40 07:20:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:11 Set channel filter=0.000000e+000 result=40 07:20:11 Config A/D Result=40 07:20:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:11 Get A/D filter: -9.255963e+061 result=40 07:20:11 Get A/D value=-858993460 result=40 07:20:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:11 Parameters OK 07:20:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:11 Set A/D data flow result=40 07:20:11 Set A/D channel type result=40 07:20:11 Set A/D encoding result=40 07:20:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:11 Set channel filter=0.000000e+000 result=40 07:20:11 Config A/D Result=40 07:20:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:11 Get A/D filter: -9.255963e+061 result=40 07:20:11 Get A/D value=-858993460 result=40 07:20:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:11 Aux= 07:20:11 Message to Camera, serial 43686 queued 07:20:47 Received message from Master: op=PointingHead serial=43699 07:20:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:20:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:20:48 Point started: ret=0 07:20:48 point_skyscan result=0 07:20:49 Check angles 07:20:49 SkyScan query 07:20:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:20:49 Message to Master queued w/err=0: serial=43699 error=0 07:20:54 Received message from Master: op=Filter serial=43700 07:20:54 Color wheel filter change from 0 to 0 07:20:54 FLIGetFilterPos err=0 currentPosition=0 07:20:54 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:54 Filter is already there-color wheel unchanged 07:20:54 Received message from Master: op=Shutter serial=43701 07:20:54 Shutter LASER close 07:20:54 Received message from Camera: op=State serial=43703 07:20:54 GetSingleValue result=40 Value=cccccccc 07:20:54 SkyScan query 07:20:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:55 Parameters OK 07:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:55 Set A/D data flow result=40 07:20:55 Set A/D channel type result=40 07:20:55 Set A/D encoding result=40 07:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:55 Set channel filter=0.000000e+000 result=40 07:20:55 Config A/D Result=40 07:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:55 Get A/D filter: -9.255963e+061 result=40 07:20:55 Get A/D value=-858993460 result=40 07:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:55 Parameters OK 07:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:55 Set A/D data flow result=40 07:20:55 Set A/D channel type result=40 07:20:55 Set A/D encoding result=40 07:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:55 Set channel filter=0.000000e+000 result=40 07:20:55 Config A/D Result=40 07:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:55 Get A/D filter: -9.255963e+061 result=40 07:20:55 Get A/D value=-858993460 result=40 07:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:55 Aux= 07:20:55 Message to Camera, serial 43703 queued 07:21:32 Received message from Master: op=PointingHead serial=43716 07:21:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:21:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:21:32 Point started: ret=0 07:21:32 point_skyscan result=0 07:21:33 Check angles 07:21:33 SkyScan query 07:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:21:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:21:33 Message to Master queued w/err=0: serial=43716 error=0 07:21:38 Received message from Master: op=Filter serial=43717 07:21:38 Color wheel filter change from 0 to 0 07:21:38 FLIGetFilterPos err=0 currentPosition=0 07:21:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:38 Filter is already there-color wheel unchanged 07:21:39 Received message from Master: op=Shutter serial=43718 07:21:39 Shutter LASER close 07:21:39 Received message from Camera: op=State serial=43720 07:21:39 GetSingleValue result=40 Value=cccccccc 07:21:39 SkyScan query 07:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:21:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:39 Parameters OK 07:21:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:39 Set A/D data flow result=40 07:21:39 Set A/D channel type result=40 07:21:39 Set A/D encoding result=40 07:21:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:39 Set channel filter=0.000000e+000 result=40 07:21:39 Config A/D Result=40 07:21:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:39 Get A/D filter: -9.255963e+061 result=40 07:21:39 Get A/D value=-858993460 result=40 07:21:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:39 Parameters OK 07:21:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:39 Set A/D data flow result=40 07:21:39 Set A/D channel type result=40 07:21:39 Set A/D encoding result=40 07:21:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:39 Set channel filter=0.000000e+000 result=40 07:21:39 Config A/D Result=40 07:21:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:39 Get A/D filter: -9.255963e+061 result=40 07:21:39 Get A/D value=-858993460 result=40 07:21:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:39 Aux= 07:21:39 Message to Camera, serial 43720 queued 07:22:16 Received message from Master: op=PointingHead serial=43733 07:22:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:22:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:22:16 Point started: ret=0 07:22:16 point_skyscan result=0 07:22:17 Check angles 07:22:17 SkyScan query 07:22:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:22:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:22:18 Message to Master queued w/err=0: serial=43733 error=0 07:22:23 Received message from Master: op=Filter serial=43734 07:22:23 Color wheel filter change from 0 to 0 07:22:23 FLIGetFilterPos err=0 currentPosition=0 07:22:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:23 Filter is already there-color wheel unchanged 07:22:23 Received message from Master: op=Shutter serial=43735 07:22:23 Shutter LASER close 07:22:23 Received message from Camera: op=State serial=43737 07:22:23 GetSingleValue result=40 Value=cccccccc 07:22:23 SkyScan query 07:22:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:22:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:24 Parameters OK 07:22:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:24 Set A/D data flow result=40 07:22:24 Set A/D channel type result=40 07:22:24 Set A/D encoding result=40 07:22:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:24 Set channel filter=0.000000e+000 result=40 07:22:24 Config A/D Result=40 07:22:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:24 Get A/D filter: -9.255963e+061 result=40 07:22:24 Get A/D value=-858993460 result=40 07:22:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:24 Parameters OK 07:22:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:24 Set A/D data flow result=40 07:22:24 Set A/D channel type result=40 07:22:24 Set A/D encoding result=40 07:22:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:24 Set channel filter=0.000000e+000 result=40 07:22:24 Config A/D Result=40 07:22:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:24 Get A/D filter: -9.255963e+061 result=40 07:22:24 Get A/D value=-858993460 result=40 07:22:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:24 Aux= 07:22:24 Message to Camera, serial 43737 queued 07:23:00 Received message from Master: op=PointingHead serial=43750 07:23:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:23:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:23:01 Point started: ret=0 07:23:01 point_skyscan result=0 07:23:01 Check angles 07:23:01 SkyScan query 07:23:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.61<-13574 Statuses=0008 0009 07:23:02 Msec=0 True Az=112.995 Ze=-23.61 Az status=0008 Ze status=0009 07:23:02 Check angles 07:23:02 SkyScan query 07:23:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 07:23:03 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 07:23:03 Check angles 07:23:03 SkyScan query 07:23:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.52<-16368 Statuses=0008 0009 07:23:04 Msec=1500 True Az=112.995 Ze=-65.52 Az status=0008 Ze status=0009 07:23:04 Check angles 07:23:04 SkyScan query 07:23:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.49<-17766 Statuses=0008 0009 07:23:04 Msec=2250 True Az=112.995 Ze=-86.49 Az status=0008 Ze status=0009 07:23:04 Check angles 07:23:04 SkyScan query 07:23:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.43<-19162 Statuses=0008 0009 07:23:05 Msec=3000 True Az=112.995 Ze=-107.43 Az status=0008 Ze status=0009 07:23:05 Check angles 07:23:05 SkyScan query 07:23:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.385<-20559 Statuses=0008 0009 07:23:06 Msec=3750 True Az=112.995 Ze=-128.385 Az status=0008 Ze status=0009 07:23:06 Check angles 07:23:06 SkyScan query 07:23:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.355<-21957 Statuses=0008 0009 07:23:07 Msec=4500 True Az=112.995 Ze=-149.355 Az status=0008 Ze status=0009 07:23:07 Check angles 07:23:07 SkyScan query 07:23:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.295<-23353 Statuses=0008 0009 07:23:07 Msec=5250 True Az=112.995 Ze=-170.295 Az status=0008 Ze status=0009 07:23:07 Check angles 07:23:07 SkyScan query 07:23:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:23:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:23:08 Message to Master queued w/err=0: serial=43750 error=0 07:23:13 Received message from Master: op=Filter serial=43751 07:23:13 Color wheel filter change from 0 to 0 07:23:13 FLIGetFilterPos err=0 currentPosition=0 07:23:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:13 Filter is already there-color wheel unchanged 07:23:13 Received message from Master: op=Shutter serial=43752 07:23:13 Shutter LASER open 07:23:13 Received message from Camera: op=State serial=43754 07:23:13 GetSingleValue result=40 Value=cccccccc 07:23:13 SkyScan query 07:23:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:23:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:14 Parameters OK 07:23:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:14 Set A/D data flow result=40 07:23:14 Set A/D channel type result=40 07:23:14 Set A/D encoding result=40 07:23:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:14 Set channel filter=0.000000e+000 result=40 07:23:14 Config A/D Result=40 07:23:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:14 Get A/D filter: -9.255963e+061 result=40 07:23:14 Get A/D value=-858993460 result=40 07:23:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:14 Parameters OK 07:23:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:14 Set A/D data flow result=40 07:23:14 Set A/D channel type result=40 07:23:14 Set A/D encoding result=40 07:23:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:14 Set channel filter=0.000000e+000 result=40 07:23:14 Config A/D Result=40 07:23:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:14 Get A/D filter: -9.255963e+061 result=40 07:23:14 Get A/D value=-858993460 result=40 07:23:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:14 Aux= 07:23:14 Message to Camera, serial 43754 queued 07:23:21 Received message from Master: op=Shutter serial=43763 07:23:21 Shutter LASER close 07:23:22 Received message from Master: op=PointingHead serial=43767 07:23:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:23:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:23:22 Point started: ret=0 07:23:22 point_skyscan result=0 07:23:23 Check angles 07:23:23 SkyScan query 07:23:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 07:23:24 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 07:23:24 Check angles 07:23:24 SkyScan query 07:23:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 07:23:25 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 07:23:25 Check angles 07:23:25 SkyScan query 07:23:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.58<-18772 Statuses=0008 0009 07:23:25 Msec=1500 True Az=112.995 Ze=-101.58 Az status=0008 Ze status=0009 07:23:25 Check angles 07:23:25 SkyScan query 07:23:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.61<-17374 Statuses=0008 0009 07:23:26 Msec=2250 True Az=112.995 Ze=-80.61 Az status=0008 Ze status=0009 07:23:26 Check angles 07:23:26 SkyScan query 07:23:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.67<-15978 Statuses=0008 0009 07:23:27 Msec=3000 True Az=112.995 Ze=-59.67 Az status=0008 Ze status=0009 07:23:27 Check angles 07:23:27 SkyScan query 07:23:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.715<-14581 Statuses=0008 0009 07:23:28 Msec=3750 True Az=112.995 Ze=-38.715 Az status=0008 Ze status=0009 07:23:28 Check angles 07:23:28 SkyScan query 07:23:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.745<-13183 Statuses=0008 0009 07:23:28 Msec=4500 True Az=112.995 Ze=-17.745 Az status=0008 Ze status=0009 07:23:28 Check angles 07:23:28 SkyScan query 07:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=3.21<-11786 Statuses=0008 0009 07:23:29 Msec=5250 True Az=112.995 Ze=3.21 Az status=0008 Ze status=0009 07:23:29 Check angles 07:23:29 SkyScan query 07:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:23:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:23:30 Message to Master queued w/err=0: serial=43767 error=0 07:23:35 Received message from Master: op=Filter serial=43768 07:23:35 Color wheel filter change from 0 to 0 07:23:35 FLIGetFilterPos err=0 currentPosition=0 07:23:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:35 Filter is already there-color wheel unchanged 07:23:35 Received message from Master: op=Shutter serial=43769 07:23:35 Shutter LASER close 07:23:35 Received message from Camera: op=State serial=43771 07:23:35 GetSingleValue result=40 Value=cccccccc 07:23:35 SkyScan query 07:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:23:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:36 Parameters OK 07:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:36 Set A/D data flow result=40 07:23:36 Set A/D channel type result=40 07:23:36 Set A/D encoding result=40 07:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:36 Set channel filter=0.000000e+000 result=40 07:23:36 Config A/D Result=40 07:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:36 Get A/D filter: -9.255963e+061 result=40 07:23:36 Get A/D value=-858993460 result=40 07:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:36 Parameters OK 07:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:36 Set A/D data flow result=40 07:23:36 Set A/D channel type result=40 07:23:36 Set A/D encoding result=40 07:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:36 Set channel filter=0.000000e+000 result=40 07:23:36 Config A/D Result=40 07:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:36 Get A/D filter: -9.255963e+061 result=40 07:23:36 Get A/D value=-858993460 result=40 07:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:36 Aux= 07:23:36 Message to Camera, serial 43771 queued [UTC 2019-3-1 07:23:50] 07:24:13 Received message from Master: op=PointingHead serial=43784 07:24:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:24:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:24:13 Point started: ret=0 07:24:13 point_skyscan result=0 07:24:14 Check angles 07:24:14 SkyScan query 07:24:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:24:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:24:14 Message to Master queued w/err=0: serial=43784 error=0 07:24:19 Received message from Master: op=Filter serial=43785 07:24:19 Color wheel filter change from 0 to 0 07:24:19 FLIGetFilterPos err=0 currentPosition=0 07:24:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:19 Filter is already there-color wheel unchanged 07:24:19 Received message from Master: op=Shutter serial=43786 07:24:19 Shutter LASER close 07:24:19 Received message from Camera: op=State serial=43788 07:24:19 GetSingleValue result=40 Value=cccccccc 07:24:19 SkyScan query 07:24:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:24:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:20 Parameters OK 07:24:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:20 Set A/D data flow result=40 07:24:20 Set A/D channel type result=40 07:24:20 Set A/D encoding result=40 07:24:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:20 Set channel filter=0.000000e+000 result=40 07:24:20 Config A/D Result=40 07:24:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:20 Get A/D filter: -9.255963e+061 result=40 07:24:20 Get A/D value=-858993460 result=40 07:24:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:20 Parameters OK 07:24:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:20 Set A/D data flow result=40 07:24:20 Set A/D channel type result=40 07:24:20 Set A/D encoding result=40 07:24:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:20 Set channel filter=0.000000e+000 result=40 07:24:20 Config A/D Result=40 07:24:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:20 Get A/D filter: -9.255963e+061 result=40 07:24:20 Get A/D value=-858993460 result=40 07:24:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:20 Aux= 07:24:20 Message to Camera, serial 43788 queued 07:24:56 Received message from Master: op=PointingHead serial=43800 07:24:56 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:24:56 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:24:56 Point started: ret=0 07:24:56 point_skyscan result=0 07:24:57 Check angles 07:24:57 SkyScan query 07:24:58 SkyScan query done: ret=0 az=136.455<-9097 ze=-6.51<-12434 Statuses=0009 0008 07:24:58 Msec=0 True Az=136.455 Ze=-6.51 Az status=0009 Ze status=0008 07:24:58 Check angles 07:24:58 SkyScan query 07:24:58 SkyScan query done: ret=0 az=154.275<-10285 ze=-6.495<-12433 Statuses=0009 0008 07:24:58 Msec=750 True Az=154.275 Ze=-6.495 Az status=0009 Ze status=0008 07:24:59 Check angles 07:24:59 SkyScan query 07:24:59 SkyScan query done: ret=0 az=171.795<-11453 ze=-6.495<-12433 Statuses=0009 0008 07:24:59 Msec=1500 True Az=171.795 Ze=-6.495 Az status=0009 Ze status=0008 07:24:59 Check angles 07:24:59 SkyScan query 07:25:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:25:00 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:25:00 Message to Master queued w/err=0: serial=43800 error=0 07:25:05 Received message from Master: op=Filter serial=43801 07:25:05 Color wheel filter change from 0 to 0 07:25:05 FLIGetFilterPos err=0 currentPosition=0 07:25:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:05 Filter is already there-color wheel unchanged 07:25:05 Received message from Master: op=Shutter serial=43802 07:25:05 Shutter LASER close 07:25:05 Received message from Camera: op=State serial=43804 07:25:05 GetSingleValue result=40 Value=cccccccc 07:25:05 SkyScan query 07:25:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:25:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:06 Parameters OK 07:25:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:06 Set A/D data flow result=40 07:25:06 Set A/D channel type result=40 07:25:06 Set A/D encoding result=40 07:25:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:06 Set channel filter=0.000000e+000 result=40 07:25:06 Config A/D Result=40 07:25:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:06 Get A/D filter: -9.255963e+061 result=40 07:25:06 Get A/D value=-858993460 result=40 07:25:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:06 Parameters OK 07:25:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:06 Set A/D data flow result=40 07:25:06 Set A/D channel type result=40 07:25:06 Set A/D encoding result=40 07:25:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:06 Set channel filter=0.000000e+000 result=40 07:25:06 Config A/D Result=40 07:25:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:06 Get A/D filter: -9.255963e+061 result=40 07:25:06 Get A/D value=-858993460 result=40 07:25:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:06 Aux= 07:25:06 Message to Camera, serial 43804 queued 07:25:42 Received message from Master: op=PointingHead serial=43817 07:25:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:25:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:25:43 Point started: ret=0 07:25:43 point_skyscan result=0 07:25:44 Check angles 07:25:44 SkyScan query 07:25:44 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 07:25:44 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 07:25:44 Check angles 07:25:44 SkyScan query 07:25:45 SkyScan query done: ret=0 az=135.495<-9033 ze=6.495<-11567 Statuses=0009 0008 07:25:45 Msec=750 True Az=135.495 Ze=6.495 Az status=0009 Ze status=0008 07:25:45 Check angles 07:25:45 SkyScan query 07:25:46 SkyScan query done: ret=0 az=118.005<-7867 ze=6.495<-11567 Statuses=0009 0008 07:25:46 Msec=1500 True Az=118.005 Ze=6.495 Az status=0009 Ze status=0008 07:25:46 Check angles 07:25:46 SkyScan query 07:25:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:25:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:25:46 Message to Master queued w/err=0: serial=43817 error=0 07:25:51 Received message from Master: op=Filter serial=43818 07:25:51 Color wheel filter change from 0 to 0 07:25:51 FLIGetFilterPos err=0 currentPosition=0 07:25:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:51 Filter is already there-color wheel unchanged 07:25:52 Received message from Master: op=Shutter serial=43819 07:25:52 Shutter LASER close 07:25:52 Received message from Camera: op=State serial=43821 07:25:52 GetSingleValue result=40 Value=cccccccc 07:25:52 SkyScan query 07:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:25:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:52 Parameters OK 07:25:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:52 Set A/D data flow result=40 07:25:52 Set A/D channel type result=40 07:25:52 Set A/D encoding result=40 07:25:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:52 Set channel filter=0.000000e+000 result=40 07:25:52 Config A/D Result=40 07:25:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:52 Get A/D filter: -9.255963e+061 result=40 07:25:52 Get A/D value=-858993460 result=40 07:25:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:52 Parameters OK 07:25:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:52 Set A/D data flow result=40 07:25:52 Set A/D channel type result=40 07:25:52 Set A/D encoding result=40 07:25:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:52 Set channel filter=0.000000e+000 result=40 07:25:52 Config A/D Result=40 07:25:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:52 Get A/D filter: -9.255963e+061 result=40 07:25:52 Get A/D value=-858993460 result=40 07:25:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:52 Aux= 07:25:52 Message to Camera, serial 43821 queued 07:26:29 Received message from Master: op=PointingHead serial=43834 07:26:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:26:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:26:29 Point started: ret=0 07:26:29 point_skyscan result=0 07:26:30 Check angles 07:26:30 SkyScan query 07:26:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 07:26:31 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 07:26:31 Check angles 07:26:31 SkyScan query 07:26:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.255<-15017 Statuses=0008 0009 07:26:31 Msec=750 True Az=112.995 Ze=-45.255 Az status=0008 Ze status=0009 07:26:32 Check angles 07:26:32 SkyScan query 07:26:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.15<-16410 Statuses=0008 0009 07:26:32 Msec=1500 True Az=112.995 Ze=-66.15 Az status=0008 Ze status=0009 07:26:32 Check angles 07:26:32 SkyScan query 07:26:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.54<-17836 Statuses=0008 0009 07:26:33 Msec=2250 True Az=112.995 Ze=-87.54 Az status=0008 Ze status=0009 07:26:33 Check angles 07:26:33 SkyScan query 07:26:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.48<-19232 Statuses=0008 0009 07:26:34 Msec=3000 True Az=112.995 Ze=-108.48 Az status=0008 Ze status=0009 07:26:34 Check angles 07:26:34 SkyScan query 07:26:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.45<-20630 Statuses=0008 0009 07:26:34 Msec=3750 True Az=112.995 Ze=-129.45 Az status=0008 Ze status=0009 07:26:35 Check angles 07:26:35 SkyScan query 07:26:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.81<-22054 Statuses=0008 0009 07:26:35 Msec=4500 True Az=112.995 Ze=-150.81 Az status=0008 Ze status=0009 07:26:35 Check angles 07:26:35 SkyScan query 07:26:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.78<-23452 Statuses=0008 0009 07:26:36 Msec=5250 True Az=112.995 Ze=-171.78 Az status=0008 Ze status=0009 07:26:36 Check angles 07:26:36 SkyScan query 07:26:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:26:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:26:37 Message to Master queued w/err=0: serial=43834 error=0 07:26:42 Received message from Master: op=Filter serial=43835 07:26:42 Color wheel filter change from 0 to 0 07:26:42 FLIGetFilterPos err=0 currentPosition=0 07:26:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:42 Filter is already there-color wheel unchanged 07:26:42 Received message from Master: op=Shutter serial=43836 07:26:42 Shutter LASER open 07:26:42 Received message from Camera: op=State serial=43838 07:26:42 GetSingleValue result=40 Value=cccccccc 07:26:42 SkyScan query 07:26:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:26:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:43 Parameters OK 07:26:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:43 Set A/D data flow result=40 07:26:43 Set A/D channel type result=40 07:26:43 Set A/D encoding result=40 07:26:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:43 Set channel filter=0.000000e+000 result=40 07:26:43 Config A/D Result=40 07:26:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:43 Get A/D filter: -9.255963e+061 result=40 07:26:43 Get A/D value=-858993460 result=40 07:26:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:43 Parameters OK 07:26:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:43 Set A/D data flow result=40 07:26:43 Set A/D channel type result=40 07:26:43 Set A/D encoding result=40 07:26:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:43 Set channel filter=0.000000e+000 result=40 07:26:43 Config A/D Result=40 07:26:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:43 Get A/D filter: -9.255963e+061 result=40 07:26:43 Get A/D value=-858993460 result=40 07:26:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:43 Aux= 07:26:43 Message to Camera, serial 43838 queued 07:26:51 Received message from Master: op=Shutter serial=43848 07:26:51 Shutter LASER close 07:26:52 Received message from Master: op=PointingHead serial=43852 07:26:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:26:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:26:52 Point started: ret=0 07:26:52 point_skyscan result=0 07:26:53 Check angles 07:26:53 SkyScan query 07:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 07:26:53 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 07:26:53 Check angles 07:26:53 SkyScan query 07:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 07:26:54 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 07:26:54 Check angles 07:26:54 SkyScan query 07:26:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.44<-18696 Statuses=0008 0009 07:26:55 Msec=1500 True Az=112.995 Ze=-100.44 Az status=0008 Ze status=0009 07:26:55 Check angles 07:26:55 SkyScan query 07:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.47<-17298 Statuses=0008 0009 07:26:56 Msec=2250 True Az=112.995 Ze=-79.47 Az status=0008 Ze status=0009 07:26:56 Check angles 07:26:56 SkyScan query 07:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.05<-15870 Statuses=0008 0009 07:26:56 Msec=3000 True Az=112.995 Ze=-58.05 Az status=0008 Ze status=0009 07:26:56 Check angles 07:26:56 SkyScan query 07:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.675<-14445 Statuses=0008 0009 07:26:57 Msec=3750 True Az=112.995 Ze=-36.675 Az status=0008 Ze status=0009 07:26:57 Check angles 07:26:57 SkyScan query 07:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.735<-13049 Statuses=0008 0009 07:26:58 Msec=4500 True Az=112.995 Ze=-15.735 Az status=0008 Ze status=0009 07:26:58 Check angles 07:26:58 SkyScan query 07:26:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.95<-11670 Statuses=0008 0009 07:26:59 Msec=5250 True Az=112.995 Ze=4.95 Az status=0008 Ze status=0009 07:26:59 Check angles 07:26:59 SkyScan query 07:26:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:26:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:26:59 Message to Master queued w/err=0: serial=43852 error=0 07:27:04 Received message from Master: op=Filter serial=43853 07:27:04 Color wheel filter change from 0 to 0 07:27:04 FLIGetFilterPos err=0 currentPosition=0 07:27:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:04 Filter is already there-color wheel unchanged 07:27:04 Received message from Master: op=Shutter serial=43854 07:27:04 Shutter LASER close 07:27:05 Received message from Camera: op=State serial=43856 07:27:05 GetSingleValue result=40 Value=cccccccc 07:27:05 SkyScan query 07:27:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:27:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:05 Parameters OK 07:27:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:05 Set A/D data flow result=40 07:27:05 Set A/D channel type result=40 07:27:05 Set A/D encoding result=40 07:27:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:05 Set channel filter=0.000000e+000 result=40 07:27:05 Config A/D Result=40 07:27:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:05 Get A/D filter: -9.255963e+061 result=40 07:27:05 Get A/D value=-858993460 result=40 07:27:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:05 Parameters OK 07:27:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:05 Set A/D data flow result=40 07:27:05 Set A/D channel type result=40 07:27:05 Set A/D encoding result=40 07:27:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:05 Set channel filter=0.000000e+000 result=40 07:27:05 Config A/D Result=40 07:27:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:05 Get A/D filter: -9.255963e+061 result=40 07:27:05 Get A/D value=-858993460 result=40 07:27:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:05 Aux= 07:27:05 Message to Camera, serial 43856 queued 07:27:42 Received message from Master: op=PointingHead serial=43869 07:27:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:27:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:27:42 Point started: ret=0 07:27:42 point_skyscan result=0 07:27:43 Check angles 07:27:43 SkyScan query 07:27:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:27:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:27:44 Message to Master queued w/err=0: serial=43869 error=0 07:27:49 Received message from Master: op=Filter serial=43870 07:27:49 Color wheel filter change from 0 to 0 07:27:49 FLIGetFilterPos err=0 currentPosition=0 07:27:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:49 Filter is already there-color wheel unchanged 07:27:49 Received message from Master: op=Shutter serial=43871 07:27:49 Shutter LASER close 07:27:49 Received message from Camera: op=State serial=43873 07:27:49 GetSingleValue result=40 Value=cccccccc 07:27:49 SkyScan query 07:27:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:27:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:49 Parameters OK 07:27:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:49 Set A/D data flow result=40 07:27:49 Set A/D channel type result=40 07:27:49 Set A/D encoding result=40 07:27:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:49 Set channel filter=0.000000e+000 result=40 07:27:49 Config A/D Result=40 07:27:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:49 Get A/D filter: -9.255963e+061 result=40 07:27:49 Get A/D value=-858993460 result=40 07:27:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:49 Parameters OK 07:27:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:49 Set A/D data flow result=40 07:27:49 Set A/D channel type result=40 07:27:49 Set A/D encoding result=40 07:27:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:49 Set channel filter=0.000000e+000 result=40 07:27:49 Config A/D Result=40 07:27:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:49 Get A/D filter: -9.255963e+061 result=40 07:27:49 Get A/D value=-858993460 result=40 07:27:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:49 Aux= 07:27:49 Message to Camera, serial 43873 queued 07:28:26 Received message from Master: op=PointingHead serial=43886 07:28:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:28:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:28:27 Point started: ret=0 07:28:27 point_skyscan result=0 07:28:27 Check angles 07:28:27 SkyScan query 07:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:28:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:28:28 Message to Master queued w/err=0: serial=43886 error=0 07:28:33 Received message from Master: op=Filter serial=43887 07:28:33 Color wheel filter change from 0 to 0 07:28:33 FLIGetFilterPos err=0 currentPosition=0 07:28:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:33 Filter is already there-color wheel unchanged 07:28:33 Received message from Master: op=Shutter serial=43888 07:28:33 Shutter LASER close 07:28:33 Received message from Camera: op=State serial=43890 07:28:33 GetSingleValue result=40 Value=cccccccc 07:28:33 SkyScan query 07:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:28:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:34 Parameters OK 07:28:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:34 Set A/D data flow result=40 07:28:34 Set A/D channel type result=40 07:28:34 Set A/D encoding result=40 07:28:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:34 Set channel filter=0.000000e+000 result=40 07:28:34 Config A/D Result=40 07:28:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:34 Get A/D filter: -9.255963e+061 result=40 07:28:34 Get A/D value=-858993460 result=40 07:28:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:34 Parameters OK 07:28:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:34 Set A/D data flow result=40 07:28:34 Set A/D channel type result=40 07:28:34 Set A/D encoding result=40 07:28:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:34 Set channel filter=0.000000e+000 result=40 07:28:34 Config A/D Result=40 07:28:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:34 Get A/D filter: -9.255963e+061 result=40 07:28:34 Get A/D value=-858993460 result=40 07:28:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:34 Aux= 07:28:34 Message to Camera, serial 43890 queued 07:29:11 Received message from Master: op=PointingHead serial=43903 07:29:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:29:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:29:11 Point started: ret=0 07:29:11 point_skyscan result=0 07:29:12 Check angles 07:29:12 SkyScan query 07:29:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:29:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:29:12 Message to Master queued w/err=0: serial=43903 error=0 07:29:17 Received message from Master: op=Filter serial=43904 07:29:17 Color wheel filter change from 0 to 0 07:29:17 FLIGetFilterPos err=0 currentPosition=0 07:29:17 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:17 Filter is already there-color wheel unchanged 07:29:18 Received message from Master: op=Shutter serial=43905 07:29:18 Shutter LASER close 07:29:18 Received message from Camera: op=State serial=43907 07:29:18 GetSingleValue result=40 Value=cccccccc 07:29:18 SkyScan query 07:29:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:29:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:18 Parameters OK 07:29:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:18 Set A/D data flow result=40 07:29:18 Set A/D channel type result=40 07:29:18 Set A/D encoding result=40 07:29:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:18 Set channel filter=0.000000e+000 result=40 07:29:18 Config A/D Result=40 07:29:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:18 Get A/D filter: -9.255963e+061 result=40 07:29:18 Get A/D value=-858993460 result=40 07:29:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:18 Parameters OK 07:29:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:18 Set A/D data flow result=40 07:29:18 Set A/D channel type result=40 07:29:18 Set A/D encoding result=40 07:29:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:18 Set channel filter=0.000000e+000 result=40 07:29:18 Config A/D Result=40 07:29:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:18 Get A/D filter: -9.255963e+061 result=40 07:29:18 Get A/D value=-858993460 result=40 07:29:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:18 Aux= 07:29:18 Message to Camera, serial 43907 queued 07:29:55 Received message from Master: op=PointingHead serial=43920 07:29:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:29:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:29:55 Point started: ret=0 07:29:55 point_skyscan result=0 07:29:56 Check angles 07:29:56 SkyScan query 07:29:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 07:29:57 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 07:29:57 Check angles 07:29:57 SkyScan query 07:29:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 07:29:57 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 07:29:58 Check angles 07:29:58 SkyScan query 07:29:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 07:29:58 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 07:29:58 Check angles 07:29:58 SkyScan query 07:29:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 07:29:59 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 07:29:59 Check angles 07:29:59 SkyScan query 07:30:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 07:30:00 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 07:30:00 Check angles 07:30:00 SkyScan query 07:30:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 07:30:00 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 07:30:01 Check angles 07:30:01 SkyScan query 07:30:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.79<-21986 Statuses=0008 0009 07:30:01 Msec=4500 True Az=112.995 Ze=-149.79 Az status=0008 Ze status=0009 07:30:01 Check angles 07:30:01 SkyScan query 07:30:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.685<-23379 Statuses=0008 0009 07:30:02 Msec=5250 True Az=112.995 Ze=-170.685 Az status=0008 Ze status=0009 07:30:02 Check angles 07:30:02 SkyScan query 07:30:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:30:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:30:03 Message to Master queued w/err=0: serial=43920 error=0 07:30:08 Received message from Master: op=Filter serial=43921 07:30:08 Color wheel filter change from 0 to 0 07:30:08 FLIGetFilterPos err=0 currentPosition=0 07:30:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:08 Filter is already there-color wheel unchanged 07:30:08 Received message from Master: op=Shutter serial=43922 07:30:08 Shutter LASER open 07:30:08 Received message from Camera: op=State serial=43924 07:30:08 GetSingleValue result=40 Value=cccccccc 07:30:08 SkyScan query 07:30:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:30:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:09 Parameters OK 07:30:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:09 Set A/D data flow result=40 07:30:09 Set A/D channel type result=40 07:30:09 Set A/D encoding result=40 07:30:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:09 Set channel filter=0.000000e+000 result=40 07:30:09 Config A/D Result=40 07:30:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:09 Get A/D filter: -9.255963e+061 result=40 07:30:09 Get A/D value=-858993460 result=40 07:30:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:09 Parameters OK 07:30:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:09 Set A/D data flow result=40 07:30:09 Set A/D channel type result=40 07:30:09 Set A/D encoding result=40 07:30:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:09 Set channel filter=0.000000e+000 result=40 07:30:09 Config A/D Result=40 07:30:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:09 Get A/D filter: -9.255963e+061 result=40 07:30:09 Get A/D value=-858993460 result=40 07:30:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:09 Aux= 07:30:09 Message to Camera, serial 43924 queued 07:30:17 Received message from Master: op=Shutter serial=43934 07:30:17 Shutter LASER close 07:30:18 Received message from Master: op=PointingHead serial=43938 07:30:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:30:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:30:18 Point started: ret=0 07:30:18 point_skyscan result=0 07:30:19 Check angles 07:30:19 SkyScan query 07:30:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 07:30:19 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 07:30:19 Check angles 07:30:19 SkyScan query 07:30:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.475<-20165 Statuses=0008 0009 07:30:20 Msec=750 True Az=112.995 Ze=-122.475 Az status=0008 Ze status=0009 07:30:20 Check angles 07:30:20 SkyScan query 07:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.505<-18767 Statuses=0008 0009 07:30:21 Msec=1500 True Az=112.995 Ze=-101.505 Az status=0008 Ze status=0009 07:30:21 Check angles 07:30:21 SkyScan query 07:30:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 07:30:22 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 07:30:22 Check angles 07:30:22 SkyScan query 07:30:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 07:30:22 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 07:30:22 Check angles 07:30:22 SkyScan query 07:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 07:30:23 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 07:30:23 Check angles 07:30:23 SkyScan query 07:30:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 07:30:24 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 07:30:24 Check angles 07:30:24 SkyScan query 07:30:25 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 07:30:25 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 07:30:25 Check angles 07:30:25 SkyScan query 07:30:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:30:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:30:25 Message to Master queued w/err=0: serial=43938 error=0 07:30:30 Received message from Master: op=Filter serial=43939 07:30:30 Color wheel filter change from 0 to 0 07:30:30 FLIGetFilterPos err=0 currentPosition=0 07:30:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:30 Filter is already there-color wheel unchanged 07:30:30 Received message from Master: op=Shutter serial=43940 07:30:30 Shutter LASER close 07:30:31 Received message from Camera: op=State serial=43942 07:30:31 GetSingleValue result=40 Value=cccccccc 07:30:31 SkyScan query 07:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:30:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:31 Parameters OK 07:30:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:31 Set A/D data flow result=40 07:30:31 Set A/D channel type result=40 07:30:31 Set A/D encoding result=40 07:30:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:31 Set channel filter=0.000000e+000 result=40 07:30:31 Config A/D Result=40 07:30:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:31 Get A/D filter: -9.255963e+061 result=40 07:30:31 Get A/D value=-858993460 result=40 07:30:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:31 Parameters OK 07:30:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:31 Set A/D data flow result=40 07:30:31 Set A/D channel type result=40 07:30:31 Set A/D encoding result=40 07:30:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:31 Set channel filter=0.000000e+000 result=40 07:30:31 Config A/D Result=40 07:30:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:31 Get A/D filter: -9.255963e+061 result=40 07:30:31 Get A/D value=-858993460 result=40 07:30:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:31 Aux= 07:30:31 Message to Camera, serial 43942 queued 07:31:08 Received message from Master: op=PointingHead serial=43955 07:31:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:31:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:31:08 Point started: ret=0 07:31:08 point_skyscan result=0 07:31:09 Check angles 07:31:09 SkyScan query 07:31:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:31:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:31:10 Message to Master queued w/err=0: serial=43955 error=0 07:31:15 Received message from Master: op=Filter serial=43956 07:31:15 Color wheel filter change from 0 to 0 07:31:15 FLIGetFilterPos err=0 currentPosition=0 07:31:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:15 Filter is already there-color wheel unchanged 07:31:15 Received message from Master: op=Shutter serial=43957 07:31:15 Shutter LASER close 07:31:15 Received message from Camera: op=State serial=43959 07:31:15 GetSingleValue result=40 Value=cccccccc 07:31:15 SkyScan query 07:31:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:31:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:16 Parameters OK 07:31:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:16 Set A/D data flow result=40 07:31:16 Set A/D channel type result=40 07:31:16 Set A/D encoding result=40 07:31:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:16 Set channel filter=0.000000e+000 result=40 07:31:16 Config A/D Result=40 07:31:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:16 Get A/D filter: -9.255963e+061 result=40 07:31:16 Get A/D value=-858993460 result=40 07:31:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:16 Parameters OK 07:31:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:16 Set A/D data flow result=40 07:31:16 Set A/D channel type result=40 07:31:16 Set A/D encoding result=40 07:31:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:16 Set channel filter=0.000000e+000 result=40 07:31:16 Config A/D Result=40 07:31:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:16 Get A/D filter: -9.255963e+061 result=40 07:31:16 Get A/D value=-858993460 result=40 07:31:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:16 Aux= 07:31:16 Message to Camera, serial 43959 queued 07:31:52 Received message from Master: op=PointingHead serial=43972 07:31:52 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:31:52 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:31:53 Point started: ret=0 07:31:53 point_skyscan result=0 07:31:53 Check angles 07:31:53 SkyScan query 07:31:54 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 07:31:54 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 07:31:54 Check angles 07:31:54 SkyScan query 07:31:55 SkyScan query done: ret=0 az=153.99<-10266 ze=-6.495<-12433 Statuses=0009 0008 07:31:55 Msec=750 True Az=153.99 Ze=-6.495 Az status=0009 Ze status=0008 07:31:55 Check angles 07:31:55 SkyScan query 07:31:56 SkyScan query done: ret=0 az=171.435<-11429 ze=-6.495<-12433 Statuses=0009 0008 07:31:56 Msec=1500 True Az=171.435 Ze=-6.495 Az status=0009 Ze status=0008 07:31:56 Check angles 07:31:56 SkyScan query 07:31:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:31:56 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:31:56 Message to Master queued w/err=0: serial=43972 error=0 07:32:01 Received message from Master: op=Filter serial=43973 07:32:01 Color wheel filter change from 0 to 0 07:32:01 FLIGetFilterPos err=0 currentPosition=0 07:32:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:01 Filter is already there-color wheel unchanged 07:32:01 Received message from Master: op=Shutter serial=43974 07:32:01 Shutter LASER close 07:32:02 Received message from Camera: op=State serial=43976 07:32:02 GetSingleValue result=40 Value=cccccccc 07:32:02 SkyScan query 07:32:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:32:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:02 Parameters OK 07:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:02 Set A/D data flow result=40 07:32:02 Set A/D channel type result=40 07:32:02 Set A/D encoding result=40 07:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:02 Set channel filter=0.000000e+000 result=40 07:32:02 Config A/D Result=40 07:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:02 Get A/D filter: -9.255963e+061 result=40 07:32:02 Get A/D value=-858993460 result=40 07:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:02 Parameters OK 07:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:02 Set A/D data flow result=40 07:32:02 Set A/D channel type result=40 07:32:02 Set A/D encoding result=40 07:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:02 Set channel filter=0.000000e+000 result=40 07:32:02 Config A/D Result=40 07:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:02 Get A/D filter: -9.255963e+061 result=40 07:32:02 Get A/D value=-858993460 result=40 07:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:02 Aux= 07:32:02 Message to Camera, serial 43976 queued 07:32:39 Received message from Master: op=PointingHead serial=43989 07:32:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:32:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:32:39 Point started: ret=0 07:32:39 point_skyscan result=0 07:32:40 Check angles 07:32:40 SkyScan query 07:32:41 SkyScan query done: ret=0 az=153.18<-10212 ze=6.51<-11566 Statuses=0009 0008 07:32:41 Msec=0 True Az=153.18 Ze=6.51 Az status=0009 Ze status=0008 07:32:41 Check angles 07:32:41 SkyScan query 07:32:41 SkyScan query done: ret=0 az=135.735<-9049 ze=6.495<-11567 Statuses=0009 0008 07:32:41 Msec=750 True Az=135.735 Ze=6.495 Az status=0009 Ze status=0008 07:32:41 Check angles 07:32:41 SkyScan query 07:32:42 SkyScan query done: ret=0 az=118.305<-7887 ze=6.495<-11567 Statuses=0009 0008 07:32:42 Msec=1500 True Az=118.305 Ze=6.495 Az status=0009 Ze status=0008 07:32:42 Check angles 07:32:42 SkyScan query 07:32:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:32:43 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:32:43 Message to Master queued w/err=0: serial=43989 error=0 07:32:48 Received message from Master: op=Filter serial=43990 07:32:48 Color wheel filter change from 0 to 0 07:32:48 FLIGetFilterPos err=0 currentPosition=0 07:32:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:48 Filter is already there-color wheel unchanged 07:32:48 Received message from Master: op=Shutter serial=43991 07:32:48 Shutter LASER close 07:32:48 Received message from Camera: op=State serial=43993 07:32:48 GetSingleValue result=40 Value=cccccccc 07:32:48 SkyScan query 07:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:32:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:49 Parameters OK 07:32:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:49 Set A/D data flow result=40 07:32:49 Set A/D channel type result=40 07:32:49 Set A/D encoding result=40 07:32:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:49 Set channel filter=0.000000e+000 result=40 07:32:49 Config A/D Result=40 07:32:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:49 Get A/D filter: -9.255963e+061 result=40 07:32:49 Get A/D value=-858993460 result=40 07:32:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:49 Parameters OK 07:32:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:49 Set A/D data flow result=40 07:32:49 Set A/D channel type result=40 07:32:49 Set A/D encoding result=40 07:32:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:49 Set channel filter=0.000000e+000 result=40 07:32:49 Config A/D Result=40 07:32:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:49 Get A/D filter: -9.255963e+061 result=40 07:32:49 Get A/D value=-858993460 result=40 07:32:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:49 Aux= 07:32:49 Message to Camera, serial 43993 queued 07:33:25 Received message from Master: op=PointingHead serial=44006 07:33:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:33:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:33:26 Point started: ret=0 07:33:26 point_skyscan result=0 07:33:27 Check angles 07:33:27 SkyScan query 07:33:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 07:33:27 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 07:33:27 Check angles 07:33:27 SkyScan query 07:33:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 07:33:28 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 07:33:28 Check angles 07:33:28 SkyScan query 07:33:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 07:33:29 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 07:33:29 Check angles 07:33:29 SkyScan query 07:33:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 07:33:29 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 07:33:30 Check angles 07:33:30 SkyScan query 07:33:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.64<-19176 Statuses=0008 0009 07:33:30 Msec=3000 True Az=112.995 Ze=-107.64 Az status=0008 Ze status=0009 07:33:30 Check angles 07:33:30 SkyScan query 07:33:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 07:33:31 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 07:33:31 Check angles 07:33:31 SkyScan query 07:33:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.405<-22027 Statuses=0008 0009 07:33:32 Msec=4500 True Az=112.995 Ze=-150.405 Az status=0008 Ze status=0009 07:33:32 Check angles 07:33:32 SkyScan query 07:33:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0008 0009 07:33:32 Msec=5250 True Az=112.995 Ze=-171.18 Az status=0008 Ze status=0009 07:33:33 Check angles 07:33:33 SkyScan query 07:33:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:33:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:33:33 Message to Master queued w/err=0: serial=44006 error=0 07:33:38 Received message from Master: op=Identify serial=44007 07:33:38 Received message from Master: op=Filter serial=44010 07:33:38 Color wheel filter change from 0 to 0 07:33:38 FLIGetFilterPos err=0 currentPosition=0 07:33:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:38 Filter is already there-color wheel unchanged 07:33:38 Received message from Master: op=Shutter serial=44011 07:33:38 Shutter LASER open 07:33:39 Received message from Camera: op=State serial=44013 07:33:39 GetSingleValue result=40 Value=cccccccc 07:33:39 SkyScan query 07:33:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:33:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:39 Parameters OK 07:33:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:39 Set A/D data flow result=40 07:33:39 Set A/D channel type result=40 07:33:39 Set A/D encoding result=40 07:33:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:39 Set channel filter=0.000000e+000 result=40 07:33:39 Config A/D Result=40 07:33:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:39 Get A/D filter: -9.255963e+061 result=40 07:33:39 Get A/D value=-858993460 result=40 07:33:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:39 Parameters OK 07:33:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:39 Set A/D data flow result=40 07:33:39 Set A/D channel type result=40 07:33:39 Set A/D encoding result=40 07:33:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:39 Set channel filter=0.000000e+000 result=40 07:33:39 Config A/D Result=40 07:33:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:39 Get A/D filter: -9.255963e+061 result=40 07:33:39 Get A/D value=-858993460 result=40 07:33:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:39 Aux= 07:33:39 Message to Camera, serial 44013 queued 07:33:48 Received message from Master: op=Shutter serial=44023 07:33:48 Shutter LASER close 07:33:48 Received message from Master: op=PointingHead serial=44027 07:33:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:33:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:33:48 Point started: ret=0 07:33:48 point_skyscan result=0 07:33:49 Check angles 07:33:49 SkyScan query 07:33:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 07:33:50 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 07:33:50 Check angles 07:33:50 SkyScan query 07:33:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.47<-20098 Statuses=0008 0009 07:33:50 Msec=750 True Az=112.995 Ze=-121.47 Az status=0008 Ze status=0009 07:33:51 Check angles 07:33:51 SkyScan query 07:33:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.515<-18701 Statuses=0008 0009 07:33:51 Msec=1500 True Az=112.995 Ze=-100.515 Az status=0008 Ze status=0009 07:33:51 Check angles 07:33:51 SkyScan query 07:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.545<-17303 Statuses=0008 0009 07:33:52 Msec=2250 True Az=112.995 Ze=-79.545 Az status=0008 Ze status=0009 07:33:52 Check angles 07:33:52 SkyScan query 07:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.59<-15906 Statuses=0008 0009 07:33:53 Msec=3000 True Az=112.995 Ze=-58.59 Az status=0008 Ze status=0009 07:33:53 Check angles 07:33:53 SkyScan query 07:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.65<-14510 Statuses=0008 0009 07:33:53 Msec=3750 True Az=112.995 Ze=-37.65 Az status=0008 Ze status=0009 07:33:54 Check angles 07:33:54 SkyScan query 07:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.23<-13082 Statuses=0008 0009 07:33:54 Msec=4500 True Az=112.995 Ze=-16.23 Az status=0008 Ze status=0009 07:33:54 Check angles 07:33:54 SkyScan query 07:33:55 SkyScan query done: ret=0 az=112.995<-7533 ze=4.575<-11695 Statuses=0008 0009 07:33:55 Msec=5250 True Az=112.995 Ze=4.575 Az status=0008 Ze status=0009 07:33:55 Check angles 07:33:55 SkyScan query 07:33:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:33:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:33:56 Message to Master queued w/err=0: serial=44027 error=0 07:34:01 Received message from Master: op=Filter serial=44028 07:34:01 Color wheel filter change from 0 to 0 07:34:01 FLIGetFilterPos err=0 currentPosition=0 07:34:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:01 Filter is already there-color wheel unchanged 07:34:01 Received message from Master: op=Shutter serial=44029 07:34:01 Shutter LASER close 07:34:01 Received message from Camera: op=State serial=44031 07:34:01 GetSingleValue result=40 Value=cccccccc 07:34:01 SkyScan query 07:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:34:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:02 Parameters OK 07:34:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:02 Set A/D data flow result=40 07:34:02 Set A/D channel type result=40 07:34:02 Set A/D encoding result=40 07:34:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:02 Set channel filter=0.000000e+000 result=40 07:34:02 Config A/D Result=40 07:34:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:02 Get A/D filter: -9.255963e+061 result=40 07:34:02 Get A/D value=-858993460 result=40 07:34:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:02 Parameters OK 07:34:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:02 Set A/D data flow result=40 [UTC 2019-3-1 07:34:02] 07:34:02 Set A/D channel type result=40 07:34:02 Set A/D encoding result=40 07:34:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:02 Set channel filter=0.000000e+000 result=40 07:34:02 Config A/D Result=40 07:34:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:02 Get A/D filter: -9.255963e+061 result=40 07:34:02 Get A/D value=-858993460 result=40 07:34:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:02 Aux= 07:34:02 Message to Camera, serial 44031 queued 07:34:39 Received message from Master: op=PointingHead serial=44044 07:34:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:34:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:34:39 Point started: ret=0 07:34:39 point_skyscan result=0 07:34:40 Check angles 07:34:40 SkyScan query 07:34:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:34:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:34:40 Message to Master queued w/err=0: serial=44044 error=0 07:34:45 Received message from Master: op=Filter serial=44045 07:34:45 Color wheel filter change from 0 to 0 07:34:45 FLIGetFilterPos err=0 currentPosition=0 07:34:45 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:45 Filter is already there-color wheel unchanged 07:34:45 Received message from Master: op=Shutter serial=44046 07:34:45 Shutter LASER close 07:34:45 Received message from Camera: op=State serial=44048 07:34:45 GetSingleValue result=40 Value=cccccccc 07:34:45 SkyScan query 07:34:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:34:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:46 Parameters OK 07:34:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:46 Set A/D data flow result=40 07:34:46 Set A/D channel type result=40 07:34:46 Set A/D encoding result=40 07:34:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:46 Set channel filter=0.000000e+000 result=40 07:34:46 Config A/D Result=40 07:34:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:46 Get A/D filter: -9.255963e+061 result=40 07:34:46 Get A/D value=-858993460 result=40 07:34:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:46 Parameters OK 07:34:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:46 Set A/D data flow result=40 07:34:46 Set A/D channel type result=40 07:34:46 Set A/D encoding result=40 07:34:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:46 Set channel filter=0.000000e+000 result=40 07:34:46 Config A/D Result=40 07:34:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:46 Get A/D filter: -9.255963e+061 result=40 07:34:46 Get A/D value=-858993460 result=40 07:34:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:46 Aux= 07:34:46 Message to Camera, serial 44048 queued 07:35:23 Received message from Master: op=PointingHead serial=44061 07:35:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:35:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:35:23 Point started: ret=0 07:35:23 point_skyscan result=0 07:35:24 Check angles 07:35:24 SkyScan query 07:35:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:35:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:35:24 Message to Master queued w/err=0: serial=44061 error=0 07:35:29 Received message from Master: op=Filter serial=44062 07:35:29 Color wheel filter change from 0 to 0 07:35:29 FLIGetFilterPos err=0 currentPosition=0 07:35:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:29 Filter is already there-color wheel unchanged 07:35:30 Received message from Master: op=Shutter serial=44063 07:35:30 Shutter LASER close 07:35:30 Received message from Camera: op=State serial=44065 07:35:30 GetSingleValue result=40 Value=cccccccc 07:35:30 SkyScan query 07:35:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:35:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:30 Parameters OK 07:35:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:30 Set A/D data flow result=40 07:35:30 Set A/D channel type result=40 07:35:30 Set A/D encoding result=40 07:35:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:30 Set channel filter=0.000000e+000 result=40 07:35:30 Config A/D Result=40 07:35:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:30 Get A/D filter: -9.255963e+061 result=40 07:35:30 Get A/D value=-858993460 result=40 07:35:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:30 Parameters OK 07:35:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:30 Set A/D data flow result=40 07:35:30 Set A/D channel type result=40 07:35:30 Set A/D encoding result=40 07:35:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:30 Set channel filter=0.000000e+000 result=40 07:35:30 Config A/D Result=40 07:35:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:30 Get A/D filter: -9.255963e+061 result=40 07:35:30 Get A/D value=-858993460 result=40 07:35:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:30 Aux= 07:35:30 Message to Camera, serial 44065 queued 07:36:07 Received message from Master: op=PointingHead serial=44078 07:36:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:36:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:36:07 Point started: ret=0 07:36:07 point_skyscan result=0 07:36:08 Check angles 07:36:08 SkyScan query 07:36:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:36:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:36:09 Message to Master queued w/err=0: serial=44078 error=0 07:36:14 Received message from Master: op=Filter serial=44079 07:36:14 Color wheel filter change from 0 to 0 07:36:14 FLIGetFilterPos err=0 currentPosition=0 07:36:14 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:14 Filter is already there-color wheel unchanged 07:36:14 Received message from Master: op=Shutter serial=44080 07:36:14 Shutter LASER close 07:36:14 Received message from Camera: op=State serial=44082 07:36:14 GetSingleValue result=40 Value=cccccccc 07:36:14 SkyScan query 07:36:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:36:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:15 Parameters OK 07:36:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:15 Set A/D data flow result=40 07:36:15 Set A/D channel type result=40 07:36:15 Set A/D encoding result=40 07:36:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:15 Set channel filter=0.000000e+000 result=40 07:36:15 Config A/D Result=40 07:36:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:15 Get A/D filter: -9.255963e+061 result=40 07:36:15 Get A/D value=-858993460 result=40 07:36:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:15 Parameters OK 07:36:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:15 Set A/D data flow result=40 07:36:15 Set A/D channel type result=40 07:36:15 Set A/D encoding result=40 07:36:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:15 Set channel filter=0.000000e+000 result=40 07:36:15 Config A/D Result=40 07:36:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:15 Get A/D filter: -9.255963e+061 result=40 07:36:15 Get A/D value=-858993460 result=40 07:36:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:15 Aux= 07:36:15 Message to Camera, serial 44082 queued 07:36:51 Received message from Master: op=PointingHead serial=44095 07:36:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:36:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:36:52 Point started: ret=0 07:36:52 point_skyscan result=0 07:36:52 Check angles 07:36:52 SkyScan query 07:36:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 07:36:53 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 07:36:53 Check angles 07:36:53 SkyScan query 07:36:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.1<-14940 Statuses=0008 0009 07:36:54 Msec=750 True Az=112.995 Ze=-44.1 Az status=0008 Ze status=0009 07:36:54 Check angles 07:36:54 SkyScan query 07:36:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.055<-16337 Statuses=0008 0009 07:36:55 Msec=1500 True Az=112.995 Ze=-65.055 Az status=0008 Ze status=0009 07:36:55 Check angles 07:36:55 SkyScan query 07:36:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.04<-17736 Statuses=0008 0009 07:36:55 Msec=2250 True Az=112.995 Ze=-86.04 Az status=0008 Ze status=0009 07:36:55 Check angles 07:36:55 SkyScan query 07:36:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.965<-19131 Statuses=0008 0009 07:36:56 Msec=3000 True Az=112.995 Ze=-106.965 Az status=0008 Ze status=0009 07:36:56 Check angles 07:36:56 SkyScan query 07:36:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.935<-20529 Statuses=0008 0009 07:36:57 Msec=3750 True Az=112.995 Ze=-127.935 Az status=0008 Ze status=0009 07:36:57 Check angles 07:36:57 SkyScan query 07:36:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.89<-21926 Statuses=0008 0009 07:36:58 Msec=4500 True Az=112.995 Ze=-148.89 Az status=0008 Ze status=0009 07:36:58 Check angles 07:36:58 SkyScan query 07:36:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.83<-23322 Statuses=0008 0009 07:36:58 Msec=5250 True Az=112.995 Ze=-169.83 Az status=0008 Ze status=0009 07:36:58 Check angles 07:36:58 SkyScan query 07:36:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:36:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:36:59 Message to Master queued w/err=0: serial=44095 error=0 07:37:04 Received message from Master: op=Filter serial=44096 07:37:04 Color wheel filter change from 0 to 0 07:37:04 FLIGetFilterPos err=0 currentPosition=0 07:37:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:04 Filter is already there-color wheel unchanged 07:37:04 Received message from Master: op=Shutter serial=44097 07:37:04 Shutter LASER open 07:37:04 Received message from Camera: op=State serial=44099 07:37:04 GetSingleValue result=40 Value=cccccccc 07:37:04 SkyScan query 07:37:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:37:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:05 Parameters OK 07:37:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:05 Set A/D data flow result=40 07:37:05 Set A/D channel type result=40 07:37:05 Set A/D encoding result=40 07:37:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:05 Set channel filter=0.000000e+000 result=40 07:37:05 Config A/D Result=40 07:37:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:05 Get A/D filter: -9.255963e+061 result=40 07:37:05 Get A/D value=-858993460 result=40 07:37:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:05 Parameters OK 07:37:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:05 Set A/D data flow result=40 07:37:05 Set A/D channel type result=40 07:37:05 Set A/D encoding result=40 07:37:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:05 Set channel filter=0.000000e+000 result=40 07:37:05 Config A/D Result=40 07:37:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:05 Get A/D filter: -9.255963e+061 result=40 07:37:05 Get A/D value=-858993460 result=40 07:37:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:05 Aux= 07:37:05 Message to Camera, serial 44099 queued 07:37:13 Received message from Master: op=Shutter serial=44109 07:37:13 Shutter LASER close 07:37:14 Received message from Master: op=PointingHead serial=44113 07:37:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:37:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:37:14 Point started: ret=0 07:37:14 point_skyscan result=0 07:37:15 Check angles 07:37:15 SkyScan query 07:37:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 07:37:16 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 07:37:16 Check angles 07:37:16 SkyScan query 07:37:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 07:37:16 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 07:37:17 Check angles 07:37:17 SkyScan query 07:37:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.86<-18724 Statuses=0008 0009 07:37:17 Msec=1500 True Az=112.995 Ze=-100.86 Az status=0008 Ze status=0009 07:37:17 Check angles 07:37:17 SkyScan query 07:37:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 07:37:18 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 07:37:18 Check angles 07:37:18 SkyScan query 07:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.965<-15931 Statuses=0008 0009 07:37:19 Msec=3000 True Az=112.995 Ze=-58.965 Az status=0008 Ze status=0009 07:37:19 Check angles 07:37:19 SkyScan query 07:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 07:37:19 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 07:37:20 Check angles 07:37:20 SkyScan query 07:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.025<-13135 Statuses=0008 0009 07:37:20 Msec=4500 True Az=112.995 Ze=-17.025 Az status=0008 Ze status=0009 07:37:20 Check angles 07:37:20 SkyScan query 07:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=3.93<-11738 Statuses=0008 0009 07:37:21 Msec=5250 True Az=112.995 Ze=3.93 Az status=0008 Ze status=0009 07:37:21 Check angles 07:37:21 SkyScan query 07:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:37:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:37:22 Message to Master queued w/err=0: serial=44113 error=0 07:37:27 Received message from Master: op=Filter serial=44114 07:37:27 Color wheel filter change from 0 to 0 07:37:27 FLIGetFilterPos err=0 currentPosition=0 07:37:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:27 Filter is already there-color wheel unchanged 07:37:27 Received message from Master: op=Shutter serial=44115 07:37:27 Shutter LASER close 07:37:27 Received message from Camera: op=State serial=44117 07:37:27 GetSingleValue result=40 Value=cccccccc 07:37:27 SkyScan query 07:37:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:37:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:28 Parameters OK 07:37:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:28 Set A/D data flow result=40 07:37:28 Set A/D channel type result=40 07:37:28 Set A/D encoding result=40 07:37:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:28 Set channel filter=0.000000e+000 result=40 07:37:28 Config A/D Result=40 07:37:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:28 Get A/D filter: -9.255963e+061 result=40 07:37:28 Get A/D value=-858993460 result=40 07:37:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:28 Parameters OK 07:37:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:28 Set A/D data flow result=40 07:37:28 Set A/D channel type result=40 07:37:28 Set A/D encoding result=40 07:37:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:28 Set channel filter=0.000000e+000 result=40 07:37:28 Config A/D Result=40 07:37:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:28 Get A/D filter: -9.255963e+061 result=40 07:37:28 Get A/D value=-858993460 result=40 07:37:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:28 Aux= 07:37:28 Message to Camera, serial 44117 queued 07:38:04 Received message from Master: op=PointingHead serial=44130 07:38:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:38:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:38:05 Point started: ret=0 07:38:05 point_skyscan result=0 07:38:06 Check angles 07:38:06 SkyScan query 07:38:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:38:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:38:06 Message to Master queued w/err=0: serial=44130 error=0 07:38:11 Received message from Master: op=Filter serial=44131 07:38:11 Color wheel filter change from 0 to 0 07:38:11 FLIGetFilterPos err=0 currentPosition=0 07:38:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:11 Filter is already there-color wheel unchanged 07:38:11 Received message from Master: op=Shutter serial=44132 07:38:11 Shutter LASER close 07:38:11 Received message from Camera: op=State serial=44134 07:38:11 GetSingleValue result=40 Value=cccccccc 07:38:11 SkyScan query 07:38:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:38:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:12 Parameters OK 07:38:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:12 Set A/D data flow result=40 07:38:12 Set A/D channel type result=40 07:38:12 Set A/D encoding result=40 07:38:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:12 Set channel filter=0.000000e+000 result=40 07:38:12 Config A/D Result=40 07:38:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:12 Get A/D filter: -9.255963e+061 result=40 07:38:12 Get A/D value=-858993460 result=40 07:38:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:12 Parameters OK 07:38:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:12 Set A/D data flow result=40 07:38:12 Set A/D channel type result=40 07:38:12 Set A/D encoding result=40 07:38:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:12 Set channel filter=0.000000e+000 result=40 07:38:12 Config A/D Result=40 07:38:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:12 Get A/D filter: -9.255963e+061 result=40 07:38:12 Get A/D value=-858993460 result=40 07:38:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:12 Aux= 07:38:12 Message to Camera, serial 44134 queued 07:38:48 Received message from Master: op=PointingHead serial=44146 07:38:48 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:38:48 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:38:48 Point started: ret=0 07:38:48 point_skyscan result=0 07:38:49 Check angles 07:38:49 SkyScan query 07:38:49 SkyScan query done: ret=0 az=135.93<-9062 ze=-6.51<-12434 Statuses=0009 0008 07:38:49 Msec=0 True Az=135.93 Ze=-6.51 Az status=0009 Ze status=0008 07:38:50 Check angles 07:38:50 SkyScan query 07:38:50 SkyScan query done: ret=0 az=153.765<-10251 ze=-6.495<-12433 Statuses=0009 0008 07:38:50 Msec=750 True Az=153.765 Ze=-6.495 Az status=0009 Ze status=0008 07:38:50 Check angles 07:38:50 SkyScan query 07:38:51 SkyScan query done: ret=0 az=171.6<-11440 ze=-6.495<-12433 Statuses=0009 0008 07:38:51 Msec=1500 True Az=171.6 Ze=-6.495 Az status=0009 Ze status=0008 07:38:51 Check angles 07:38:51 SkyScan query 07:38:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:38:52 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:38:52 Message to Master queued w/err=0: serial=44146 error=0 07:38:57 Received message from Master: op=Filter serial=44147 07:38:57 Color wheel filter change from 0 to 0 07:38:57 FLIGetFilterPos err=0 currentPosition=0 07:38:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:57 Filter is already there-color wheel unchanged 07:38:57 Received message from Master: op=Shutter serial=44148 07:38:57 Shutter LASER close 07:38:57 Received message from Camera: op=State serial=44150 07:38:57 GetSingleValue result=40 Value=cccccccc 07:38:57 SkyScan query 07:38:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:38:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:58 Parameters OK 07:38:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:58 Set A/D data flow result=40 07:38:58 Set A/D channel type result=40 07:38:58 Set A/D encoding result=40 07:38:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:58 Set channel filter=0.000000e+000 result=40 07:38:58 Config A/D Result=40 07:38:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:58 Get A/D filter: -9.255963e+061 result=40 07:38:58 Get A/D value=-858993460 result=40 07:38:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:58 Parameters OK 07:38:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:58 Set A/D data flow result=40 07:38:58 Set A/D channel type result=40 07:38:58 Set A/D encoding result=40 07:38:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:58 Set channel filter=0.000000e+000 result=40 07:38:58 Config A/D Result=40 07:38:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:58 Get A/D filter: -9.255963e+061 result=40 07:38:58 Get A/D value=-858993460 result=40 07:38:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:58 Aux= 07:38:58 Message to Camera, serial 44150 queued 07:39:34 Received message from Master: op=PointingHead serial=44163 07:39:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:39:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:39:35 Point started: ret=0 07:39:35 point_skyscan result=0 07:39:36 Check angles 07:39:36 SkyScan query 07:39:36 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 07:39:36 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 07:39:36 Check angles 07:39:36 SkyScan query 07:39:37 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 07:39:37 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 07:39:37 Check angles 07:39:37 SkyScan query 07:39:38 SkyScan query done: ret=0 az=117.6<-7840 ze=6.495<-11567 Statuses=0009 0008 07:39:38 Msec=1500 True Az=117.6 Ze=6.495 Az status=0009 Ze status=0008 07:39:38 Check angles 07:39:38 SkyScan query 07:39:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:39:38 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:39:38 Message to Master queued w/err=0: serial=44163 error=0 07:39:43 Received message from Master: op=Filter serial=44164 07:39:43 Color wheel filter change from 0 to 0 07:39:43 FLIGetFilterPos err=0 currentPosition=0 07:39:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:43 Filter is already there-color wheel unchanged 07:39:44 Received message from Master: op=Shutter serial=44165 07:39:44 Shutter LASER close 07:39:44 Received message from Camera: op=State serial=44167 07:39:44 GetSingleValue result=40 Value=cccccccc 07:39:44 SkyScan query 07:39:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:39:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:44 Parameters OK 07:39:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:44 Set A/D data flow result=40 07:39:44 Set A/D channel type result=40 07:39:44 Set A/D encoding result=40 07:39:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:44 Set channel filter=0.000000e+000 result=40 07:39:44 Config A/D Result=40 07:39:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:44 Get A/D filter: -9.255963e+061 result=40 07:39:44 Get A/D value=-858993460 result=40 07:39:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:44 Parameters OK 07:39:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:44 Set A/D data flow result=40 07:39:44 Set A/D channel type result=40 07:39:44 Set A/D encoding result=40 07:39:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:44 Set channel filter=0.000000e+000 result=40 07:39:44 Config A/D Result=40 07:39:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:44 Get A/D filter: -9.255963e+061 result=40 07:39:44 Get A/D value=-858993460 result=40 07:39:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:44 Aux= 07:39:44 Message to Camera, serial 44167 queued 07:40:21 Received message from Master: op=PointingHead serial=44180 07:40:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:40:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:40:21 Point started: ret=0 07:40:21 point_skyscan result=0 07:40:22 Check angles 07:40:22 SkyScan query 07:40:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 07:40:23 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 07:40:23 Check angles 07:40:23 SkyScan query 07:40:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 07:40:23 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 07:40:24 Check angles 07:40:24 SkyScan query 07:40:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 07:40:24 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 07:40:24 Check angles 07:40:24 SkyScan query 07:40:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 07:40:25 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 07:40:25 Check angles 07:40:25 SkyScan query 07:40:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.265<-19151 Statuses=0008 0009 07:40:26 Msec=3000 True Az=112.995 Ze=-107.265 Az status=0008 Ze status=0009 07:40:26 Check angles 07:40:26 SkyScan query 07:40:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 07:40:26 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 07:40:27 Check angles 07:40:27 SkyScan query 07:40:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 07:40:27 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 07:40:27 Check angles 07:40:27 SkyScan query 07:40:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0008 0009 07:40:28 Msec=5250 True Az=112.995 Ze=-170.895 Az status=0008 Ze status=0009 07:40:28 Check angles 07:40:28 SkyScan query 07:40:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:40:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:40:29 Message to Master queued w/err=0: serial=44180 error=0 07:40:34 Received message from Master: op=Filter serial=44181 07:40:34 Color wheel filter change from 0 to 0 07:40:34 FLIGetFilterPos err=0 currentPosition=0 07:40:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:34 Filter is already there-color wheel unchanged 07:40:34 Received message from Master: op=Shutter serial=44182 07:40:34 Shutter LASER open 07:40:34 Received message from Camera: op=State serial=44184 07:40:34 GetSingleValue result=40 Value=cccccccc 07:40:34 SkyScan query 07:40:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:40:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:35 Parameters OK 07:40:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:35 Set A/D data flow result=40 07:40:35 Set A/D channel type result=40 07:40:35 Set A/D encoding result=40 07:40:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:35 Set channel filter=0.000000e+000 result=40 07:40:35 Config A/D Result=40 07:40:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:35 Get A/D filter: -9.255963e+061 result=40 07:40:35 Get A/D value=-858993460 result=40 07:40:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:35 Parameters OK 07:40:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:35 Set A/D data flow result=40 07:40:35 Set A/D channel type result=40 07:40:35 Set A/D encoding result=40 07:40:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:35 Set channel filter=0.000000e+000 result=40 07:40:35 Config A/D Result=40 07:40:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:35 Get A/D filter: -9.255963e+061 result=40 07:40:35 Get A/D value=-858993460 result=40 07:40:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:35 Aux= 07:40:35 Message to Camera, serial 44184 queued 07:40:43 Received message from Master: op=Shutter serial=44194 07:40:43 Shutter LASER close 07:40:44 Received message from Master: op=PointingHead serial=44198 07:40:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:40:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:40:44 Point started: ret=0 07:40:44 point_skyscan result=0 07:40:45 Check angles 07:40:45 SkyScan query 07:40:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 07:40:45 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 07:40:45 Check angles 07:40:45 SkyScan query 07:40:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 07:40:46 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 07:40:46 Check angles 07:40:46 SkyScan query 07:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 07:40:47 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 07:40:47 Check angles 07:40:47 SkyScan query 07:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.115<-17341 Statuses=0008 0009 07:40:47 Msec=2250 True Az=112.995 Ze=-80.115 Az status=0008 Ze status=0009 07:40:48 Check angles 07:40:48 SkyScan query 07:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.815<-15921 Statuses=0008 0009 07:40:48 Msec=3000 True Az=112.995 Ze=-58.815 Az status=0008 Ze status=0009 07:40:48 Check angles 07:40:48 SkyScan query 07:40:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 07:40:49 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 07:40:49 Check angles 07:40:49 SkyScan query 07:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 07:40:50 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 07:40:50 Check angles 07:40:50 SkyScan query 07:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=4.425<-11705 Statuses=0008 0009 07:40:50 Msec=5250 True Az=112.995 Ze=4.425 Az status=0008 Ze status=0009 07:40:51 Check angles 07:40:51 SkyScan query 07:40:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:40:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:40:51 Message to Master queued w/err=0: serial=44198 error=0 07:40:56 Received message from Master: op=Filter serial=44199 07:40:56 Color wheel filter change from 0 to 0 07:40:56 FLIGetFilterPos err=0 currentPosition=0 07:40:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:56 Filter is already there-color wheel unchanged 07:40:56 Received message from Master: op=Shutter serial=44200 07:40:56 Shutter LASER close 07:40:57 Received message from Camera: op=State serial=44202 07:40:57 GetSingleValue result=40 Value=cccccccc 07:40:57 SkyScan query 07:40:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:40:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:57 Parameters OK 07:40:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:57 Set A/D data flow result=40 07:40:57 Set A/D channel type result=40 07:40:57 Set A/D encoding result=40 07:40:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:57 Set channel filter=0.000000e+000 result=40 07:40:57 Config A/D Result=40 07:40:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:57 Get A/D filter: -9.255963e+061 result=40 07:40:57 Get A/D value=-858993460 result=40 07:40:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:57 Parameters OK 07:40:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:57 Set A/D data flow result=40 07:40:57 Set A/D channel type result=40 07:40:57 Set A/D encoding result=40 07:40:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:57 Set channel filter=0.000000e+000 result=40 07:40:57 Config A/D Result=40 07:40:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:57 Get A/D filter: -9.255963e+061 result=40 07:40:57 Get A/D value=-858993460 result=40 07:40:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:57 Aux= 07:40:57 Message to Camera, serial 44202 queued 07:41:34 Received message from Master: op=PointingHead serial=44215 07:41:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:41:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:41:34 Point started: ret=0 07:41:34 point_skyscan result=0 07:41:35 Check angles 07:41:35 SkyScan query 07:41:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:41:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:41:36 Message to Master queued w/err=0: serial=44215 error=0 07:41:41 Received message from Master: op=Filter serial=44216 07:41:41 Color wheel filter change from 0 to 0 07:41:41 FLIGetFilterPos err=0 currentPosition=0 07:41:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:41 Filter is already there-color wheel unchanged 07:41:41 Received message from Master: op=Shutter serial=44217 07:41:41 Shutter LASER close 07:41:41 Received message from Camera: op=State serial=44219 07:41:41 GetSingleValue result=40 Value=cccccccc 07:41:41 SkyScan query 07:41:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:41:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:41 Parameters OK 07:41:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:41 Set A/D data flow result=40 07:41:41 Set A/D channel type result=40 07:41:41 Set A/D encoding result=40 07:41:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:41 Set channel filter=0.000000e+000 result=40 07:41:41 Config A/D Result=40 07:41:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:41 Get A/D filter: -9.255963e+061 result=40 07:41:41 Get A/D value=-858993460 result=40 07:41:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:41 Parameters OK 07:41:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:41 Set A/D data flow result=40 07:41:41 Set A/D channel type result=40 07:41:41 Set A/D encoding result=40 07:41:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:41 Set channel filter=0.000000e+000 result=40 07:41:41 Config A/D Result=40 07:41:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:41 Get A/D filter: -9.255963e+061 result=40 07:41:41 Get A/D value=-858993460 result=40 07:41:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:41 Aux= 07:41:41 Message to Camera, serial 44219 queued 07:42:18 Received message from Master: op=PointingHead serial=44232 07:42:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:42:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:42:19 Point started: ret=0 07:42:19 point_skyscan result=0 07:42:19 Check angles 07:42:19 SkyScan query 07:42:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:42:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:42:20 Message to Master queued w/err=0: serial=44232 error=0 07:42:25 Received message from Master: op=Filter serial=44233 07:42:25 Color wheel filter change from 0 to 0 07:42:25 FLIGetFilterPos err=0 currentPosition=0 07:42:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:25 Filter is already there-color wheel unchanged 07:42:25 Received message from Master: op=Shutter serial=44234 07:42:25 Shutter LASER close 07:42:25 Received message from Camera: op=State serial=44236 07:42:25 GetSingleValue result=40 Value=cccccccc 07:42:25 SkyScan query 07:42:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:42:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:26 Parameters OK 07:42:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:26 Set A/D data flow result=40 07:42:26 Set A/D channel type result=40 07:42:26 Set A/D encoding result=40 07:42:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:26 Set channel filter=0.000000e+000 result=40 07:42:26 Config A/D Result=40 07:42:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:26 Get A/D filter: -9.255963e+061 result=40 07:42:26 Get A/D value=-858993460 result=40 07:42:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:26 Parameters OK 07:42:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:26 Set A/D data flow result=40 07:42:26 Set A/D channel type result=40 07:42:26 Set A/D encoding result=40 07:42:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:26 Set channel filter=0.000000e+000 result=40 07:42:26 Config A/D Result=40 07:42:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:26 Get A/D filter: -9.255963e+061 result=40 07:42:26 Get A/D value=-858993460 result=40 07:42:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:26 Aux= 07:42:26 Message to Camera, serial 44236 queued 07:43:03 Received message from Master: op=PointingHead serial=44249 07:43:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:43:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:43:03 Point started: ret=0 07:43:03 point_skyscan result=0 07:43:04 Check angles 07:43:04 SkyScan query 07:43:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:43:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:43:04 Message to Master queued w/err=0: serial=44249 error=0 07:43:09 Received message from Master: op=Filter serial=44250 07:43:09 Color wheel filter change from 0 to 0 07:43:09 FLIGetFilterPos err=0 currentPosition=0 07:43:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:09 Filter is already there-color wheel unchanged 07:43:09 Received message from Master: op=Shutter serial=44251 07:43:09 Shutter LASER close 07:43:09 Received message from Camera: op=State serial=44253 07:43:09 GetSingleValue result=40 Value=cccccccc 07:43:09 SkyScan query 07:43:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:43:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:10 Parameters OK 07:43:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:10 Set A/D data flow result=40 07:43:10 Set A/D channel type result=40 07:43:10 Set A/D encoding result=40 07:43:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:10 Set channel filter=0.000000e+000 result=40 07:43:10 Config A/D Result=40 07:43:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:10 Get A/D filter: -9.255963e+061 result=40 07:43:10 Get A/D value=-858993460 result=40 07:43:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:10 Parameters OK 07:43:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:10 Set A/D data flow result=40 07:43:10 Set A/D channel type result=40 07:43:10 Set A/D encoding result=40 07:43:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:10 Set channel filter=0.000000e+000 result=40 07:43:10 Config A/D Result=40 07:43:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:10 Get A/D filter: -9.255963e+061 result=40 07:43:10 Get A/D value=-858993460 result=40 07:43:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:10 Aux= 07:43:10 Message to Camera, serial 44253 queued 07:43:46 Received message from Master: op=PointingHead serial=44265 07:43:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:43:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:43:46 Point started: ret=0 07:43:46 point_skyscan result=0 07:43:47 Check angles 07:43:47 SkyScan query 07:43:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 07:43:48 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 07:43:48 Check angles 07:43:48 SkyScan query 07:43:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 07:43:48 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 07:43:49 Check angles 07:43:49 SkyScan query 07:43:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 07:43:49 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 07:43:49 Check angles 07:43:49 SkyScan query 07:43:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 07:43:50 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 [UTC 2019-3-1 07:43:50] 07:43:50 Check angles 07:43:50 SkyScan query 07:43:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 07:43:51 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 07:43:51 Check angles 07:43:51 SkyScan query 07:43:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.43<-20562 Statuses=0008 0009 07:43:51 Msec=3750 True Az=112.995 Ze=-128.43 Az status=0008 Ze status=0009 07:43:52 Check angles 07:43:52 SkyScan query 07:43:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.4<-21960 Statuses=0008 0009 07:43:52 Msec=4500 True Az=112.995 Ze=-149.4 Az status=0008 Ze status=0009 07:43:52 Check angles 07:43:52 SkyScan query 07:43:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.355<-23357 Statuses=0008 0009 07:43:53 Msec=5250 True Az=112.995 Ze=-170.355 Az status=0008 Ze status=0009 07:43:53 Check angles 07:43:53 SkyScan query 07:43:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:43:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:43:54 Message to Master queued w/err=0: serial=44265 error=0 07:43:59 Received message from Master: op=Filter serial=44266 07:43:59 Color wheel filter change from 0 to 0 07:43:59 FLIGetFilterPos err=0 currentPosition=0 07:43:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:59 Filter is already there-color wheel unchanged 07:43:59 Received message from Master: op=Shutter serial=44267 07:43:59 Shutter LASER open 07:43:59 Received message from Camera: op=State serial=44269 07:43:59 GetSingleValue result=40 Value=cccccccc 07:43:59 SkyScan query 07:44:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:44:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:00 Parameters OK 07:44:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:00 Set A/D data flow result=40 07:44:00 Set A/D channel type result=40 07:44:00 Set A/D encoding result=40 07:44:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:00 Set channel filter=0.000000e+000 result=40 07:44:00 Config A/D Result=40 07:44:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:00 Get A/D filter: -9.255963e+061 result=40 07:44:00 Get A/D value=-858993460 result=40 07:44:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:00 Parameters OK 07:44:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:00 Set A/D data flow result=40 07:44:00 Set A/D channel type result=40 07:44:00 Set A/D encoding result=40 07:44:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:00 Set channel filter=0.000000e+000 result=40 07:44:00 Config A/D Result=40 07:44:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:00 Get A/D filter: -9.255963e+061 result=40 07:44:00 Get A/D value=-858993460 result=40 07:44:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:00 Aux= 07:44:00 Message to Camera, serial 44269 queued 07:44:08 Received message from Master: op=Shutter serial=44279 07:44:08 Shutter LASER close 07:44:09 Received message from Master: op=PointingHead serial=44283 07:44:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:44:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:44:09 Point started: ret=0 07:44:09 point_skyscan result=0 07:44:10 Check angles 07:44:10 SkyScan query 07:44:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 07:44:10 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 07:44:10 Check angles 07:44:10 SkyScan query 07:44:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.56<-20104 Statuses=0008 0009 07:44:11 Msec=750 True Az=112.995 Ze=-121.56 Az status=0008 Ze status=0009 07:44:11 Check angles 07:44:11 SkyScan query 07:44:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.62<-18708 Statuses=0008 0009 07:44:12 Msec=1500 True Az=112.995 Ze=-100.62 Az status=0008 Ze status=0009 07:44:12 Check angles 07:44:12 SkyScan query 07:44:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.665<-17311 Statuses=0008 0009 07:44:13 Msec=2250 True Az=112.995 Ze=-79.665 Az status=0008 Ze status=0009 07:44:13 Check angles 07:44:13 SkyScan query 07:44:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 07:44:13 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 07:44:13 Check angles 07:44:13 SkyScan query 07:44:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 07:44:14 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 07:44:14 Check angles 07:44:14 SkyScan query 07:44:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 07:44:15 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 07:44:15 Check angles 07:44:15 SkyScan query 07:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 07:44:16 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 07:44:16 Check angles 07:44:16 SkyScan query 07:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:44:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:44:16 Message to Master queued w/err=0: serial=44283 error=0 07:44:21 Received message from Master: op=Filter serial=44284 07:44:21 Color wheel filter change from 0 to 0 07:44:21 FLIGetFilterPos err=0 currentPosition=0 07:44:21 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:21 Filter is already there-color wheel unchanged 07:44:21 Received message from Master: op=Shutter serial=44285 07:44:21 Shutter LASER close 07:44:22 Received message from Camera: op=State serial=44287 07:44:22 GetSingleValue result=40 Value=cccccccc 07:44:22 SkyScan query 07:44:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:44:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:22 Parameters OK 07:44:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:22 Set A/D data flow result=40 07:44:22 Set A/D channel type result=40 07:44:22 Set A/D encoding result=40 07:44:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:22 Set channel filter=0.000000e+000 result=40 07:44:22 Config A/D Result=40 07:44:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:22 Get A/D filter: -9.255963e+061 result=40 07:44:22 Get A/D value=-858993460 result=40 07:44:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:22 Parameters OK 07:44:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:22 Set A/D data flow result=40 07:44:22 Set A/D channel type result=40 07:44:22 Set A/D encoding result=40 07:44:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:22 Set channel filter=0.000000e+000 result=40 07:44:22 Config A/D Result=40 07:44:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:22 Get A/D filter: -9.255963e+061 result=40 07:44:22 Get A/D value=-858993460 result=40 07:44:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:22 Aux= 07:44:22 Message to Camera, serial 44287 queued 07:44:59 Received message from Master: op=PointingHead serial=44300 07:44:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:44:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:44:59 Point started: ret=0 07:44:59 point_skyscan result=0 07:45:00 Check angles 07:45:00 SkyScan query 07:45:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:45:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:45:01 Message to Master queued w/err=0: serial=44300 error=0 07:45:06 Received message from Master: op=Filter serial=44301 07:45:06 Color wheel filter change from 0 to 0 07:45:06 FLIGetFilterPos err=0 currentPosition=0 07:45:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:06 Filter is already there-color wheel unchanged 07:45:06 Received message from Master: op=Shutter serial=44302 07:45:06 Shutter LASER close 07:45:06 Received message from Camera: op=State serial=44304 07:45:06 GetSingleValue result=40 Value=cccccccc 07:45:06 SkyScan query 07:45:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:45:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:06 Parameters OK 07:45:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:06 Set A/D data flow result=40 07:45:06 Set A/D channel type result=40 07:45:06 Set A/D encoding result=40 07:45:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:06 Set channel filter=0.000000e+000 result=40 07:45:06 Config A/D Result=40 07:45:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:06 Get A/D filter: -9.255963e+061 result=40 07:45:06 Get A/D value=-858993460 result=40 07:45:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:06 Parameters OK 07:45:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:06 Set A/D data flow result=40 07:45:06 Set A/D channel type result=40 07:45:06 Set A/D encoding result=40 07:45:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:06 Set channel filter=0.000000e+000 result=40 07:45:06 Config A/D Result=40 07:45:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:06 Get A/D filter: -9.255963e+061 result=40 07:45:06 Get A/D value=-858993460 result=40 07:45:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:06 Aux= 07:45:06 Message to Camera, serial 44304 queued 07:45:43 Received message from Master: op=PointingHead serial=44317 07:45:43 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:45:43 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:45:44 Point started: ret=0 07:45:44 point_skyscan result=0 07:45:44 Check angles 07:45:44 SkyScan query 07:45:45 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 07:45:45 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 07:45:45 Check angles 07:45:45 SkyScan query 07:45:46 SkyScan query done: ret=0 az=153.99<-10266 ze=-6.495<-12433 Statuses=0009 0008 07:45:46 Msec=750 True Az=153.99 Ze=-6.495 Az status=0009 Ze status=0008 07:45:46 Check angles 07:45:46 SkyScan query 07:45:47 SkyScan query done: ret=0 az=171.435<-11429 ze=-6.495<-12433 Statuses=0009 0008 07:45:47 Msec=1500 True Az=171.435 Ze=-6.495 Az status=0009 Ze status=0008 07:45:47 Check angles 07:45:47 SkyScan query 07:45:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:45:47 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:45:47 Message to Master queued w/err=0: serial=44317 error=0 07:45:52 Received message from Master: op=Filter serial=44318 07:45:52 Color wheel filter change from 0 to 0 07:45:52 FLIGetFilterPos err=0 currentPosition=0 07:45:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:52 Filter is already there-color wheel unchanged 07:45:52 Received message from Master: op=Shutter serial=44319 07:45:52 Shutter LASER close 07:45:52 Received message from Camera: op=State serial=44321 07:45:52 GetSingleValue result=40 Value=cccccccc 07:45:52 SkyScan query 07:45:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:45:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:53 Parameters OK 07:45:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:53 Set A/D data flow result=40 07:45:53 Set A/D channel type result=40 07:45:53 Set A/D encoding result=40 07:45:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:53 Set channel filter=0.000000e+000 result=40 07:45:53 Config A/D Result=40 07:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:53 Get A/D filter: -9.255963e+061 result=40 07:45:53 Get A/D value=-858993460 result=40 07:45:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:53 Parameters OK 07:45:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:53 Set A/D data flow result=40 07:45:53 Set A/D channel type result=40 07:45:53 Set A/D encoding result=40 07:45:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:53 Set channel filter=0.000000e+000 result=40 07:45:53 Config A/D Result=40 07:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:53 Get A/D filter: -9.255963e+061 result=40 07:45:53 Get A/D value=-858993460 result=40 07:45:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:53 Aux= 07:45:53 Message to Camera, serial 44321 queued 07:46:30 Received message from Master: op=PointingHead serial=44334 07:46:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:46:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:46:30 Point started: ret=0 07:46:30 point_skyscan result=0 07:46:31 Check angles 07:46:31 SkyScan query 07:46:32 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 07:46:32 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 07:46:32 Check angles 07:46:32 SkyScan query 07:46:32 SkyScan query done: ret=0 az=135.27<-9018 ze=6.495<-11567 Statuses=0009 0008 07:46:32 Msec=750 True Az=135.27 Ze=6.495 Az status=0009 Ze status=0008 07:46:32 Check angles 07:46:32 SkyScan query 07:46:33 SkyScan query done: ret=0 az=117.945<-7863 ze=6.495<-11567 Statuses=0009 0008 07:46:33 Msec=1500 True Az=117.945 Ze=6.495 Az status=0009 Ze status=0008 07:46:33 Check angles 07:46:33 SkyScan query 07:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:46:34 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:46:34 Message to Master queued w/err=0: serial=44334 error=0 07:46:39 Received message from Master: op=Filter serial=44335 07:46:39 Color wheel filter change from 0 to 0 07:46:39 FLIGetFilterPos err=0 currentPosition=0 07:46:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:39 Filter is already there-color wheel unchanged 07:46:39 Received message from Master: op=Shutter serial=44336 07:46:39 Shutter LASER close 07:46:39 Received message from Camera: op=State serial=44338 07:46:39 GetSingleValue result=40 Value=cccccccc 07:46:39 SkyScan query 07:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:46:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:40 Parameters OK 07:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:40 Set A/D data flow result=40 07:46:40 Set A/D channel type result=40 07:46:40 Set A/D encoding result=40 07:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:40 Set channel filter=0.000000e+000 result=40 07:46:40 Config A/D Result=40 07:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:40 Get A/D filter: -9.255963e+061 result=40 07:46:40 Get A/D value=-858993460 result=40 07:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:40 Parameters OK 07:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:40 Set A/D data flow result=40 07:46:40 Set A/D channel type result=40 07:46:40 Set A/D encoding result=40 07:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:40 Set channel filter=0.000000e+000 result=40 07:46:40 Config A/D Result=40 07:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:40 Get A/D filter: -9.255963e+061 result=40 07:46:40 Get A/D value=-858993460 result=40 07:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:46:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:46:40 Aux= 07:46:40 Message to Camera, serial 44338 queued 07:47:16 Received message from Master: op=PointingHead serial=44351 07:47:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:47:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:47:17 Point started: ret=0 07:47:17 point_skyscan result=0 07:47:18 Check angles 07:47:18 SkyScan query 07:47:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 07:47:18 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 07:47:18 Check angles 07:47:18 SkyScan query 07:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 07:47:19 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 07:47:19 Check angles 07:47:19 SkyScan query 07:47:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 07:47:20 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 07:47:20 Check angles 07:47:20 SkyScan query 07:47:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.415<-17761 Statuses=0008 0009 07:47:20 Msec=2250 True Az=112.995 Ze=-86.415 Az status=0008 Ze status=0009 07:47:21 Check angles 07:47:21 SkyScan query 07:47:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.355<-19157 Statuses=0008 0009 07:47:21 Msec=3000 True Az=112.995 Ze=-107.355 Az status=0008 Ze status=0009 07:47:21 Check angles 07:47:21 SkyScan query 07:47:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.31<-20554 Statuses=0008 0009 07:47:22 Msec=3750 True Az=112.995 Ze=-128.31 Az status=0008 Ze status=0009 07:47:22 Check angles 07:47:22 SkyScan query 07:47:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.7<-21980 Statuses=0008 0009 07:47:23 Msec=4500 True Az=112.995 Ze=-149.7 Az status=0008 Ze status=0009 07:47:23 Check angles 07:47:23 SkyScan query 07:47:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 07:47:23 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 07:47:24 Check angles 07:47:24 SkyScan query 07:47:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:47:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:47:24 Message to Master queued w/err=0: serial=44351 error=0 07:47:29 Received message from Master: op=Filter serial=44352 07:47:29 Color wheel filter change from 0 to 0 07:47:29 FLIGetFilterPos err=0 currentPosition=0 07:47:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:29 Filter is already there-color wheel unchanged 07:47:29 Received message from Master: op=Shutter serial=44353 07:47:29 Shutter LASER open 07:47:30 Received message from Camera: op=State serial=44355 07:47:30 GetSingleValue result=40 Value=cccccccc 07:47:30 SkyScan query 07:47:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:47:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:30 Parameters OK 07:47:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:30 Set A/D data flow result=40 07:47:30 Set A/D channel type result=40 07:47:30 Set A/D encoding result=40 07:47:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:30 Set channel filter=0.000000e+000 result=40 07:47:30 Config A/D Result=40 07:47:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:30 Get A/D filter: -9.255963e+061 result=40 07:47:30 Get A/D value=-858993460 result=40 07:47:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:30 Parameters OK 07:47:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:30 Set A/D data flow result=40 07:47:30 Set A/D channel type result=40 07:47:30 Set A/D encoding result=40 07:47:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:30 Set channel filter=0.000000e+000 result=40 07:47:30 Config A/D Result=40 07:47:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:30 Get A/D filter: -9.255963e+061 result=40 07:47:30 Get A/D value=-858993460 result=40 07:47:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:30 Aux= 07:47:30 Message to Camera, serial 44355 queued 07:47:39 Received message from Master: op=Shutter serial=44365 07:47:39 Shutter LASER close 07:47:39 Received message from Master: op=PointingHead serial=44369 07:47:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:47:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:47:39 Point started: ret=0 07:47:39 point_skyscan result=0 07:47:40 Check angles 07:47:40 SkyScan query 07:47:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 07:47:41 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 07:47:41 Check angles 07:47:41 SkyScan query 07:47:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 07:47:41 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 07:47:42 Check angles 07:47:42 SkyScan query 07:47:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 07:47:42 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 07:47:42 Check angles 07:47:42 SkyScan query 07:47:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 07:47:43 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 07:47:43 Check angles 07:47:43 SkyScan query 07:47:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.47<-15898 Statuses=0008 0009 07:47:44 Msec=3000 True Az=112.995 Ze=-58.47 Az status=0008 Ze status=0009 07:47:44 Check angles 07:47:44 SkyScan query 07:47:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 07:47:44 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 07:47:45 Check angles 07:47:45 SkyScan query 07:47:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.125<-13075 Statuses=0008 0009 07:47:45 Msec=4500 True Az=112.995 Ze=-16.125 Az status=0008 Ze status=0009 07:47:45 Check angles 07:47:45 SkyScan query 07:47:46 SkyScan query done: ret=0 az=112.995<-7533 ze=4.98<-11668 Statuses=0008 0009 07:47:46 Msec=5250 True Az=112.995 Ze=4.98 Az status=0008 Ze status=0009 07:47:46 Check angles 07:47:46 SkyScan query 07:47:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:47:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:47:47 Message to Master queued w/err=0: serial=44369 error=0 07:47:52 Received message from Master: op=Filter serial=44370 07:47:52 Color wheel filter change from 0 to 0 07:47:52 FLIGetFilterPos err=0 currentPosition=0 07:47:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:52 Filter is already there-color wheel unchanged 07:47:52 Received message from Master: op=Shutter serial=44371 07:47:52 Shutter LASER close 07:47:52 Received message from Camera: op=State serial=44373 07:47:52 GetSingleValue result=40 Value=cccccccc 07:47:52 SkyScan query 07:47:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:53 Parameters OK 07:47:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:53 Set A/D data flow result=40 07:47:53 Set A/D channel type result=40 07:47:53 Set A/D encoding result=40 07:47:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:53 Set channel filter=0.000000e+000 result=40 07:47:53 Config A/D Result=40 07:47:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:53 Get A/D filter: -9.255963e+061 result=40 07:47:53 Get A/D value=-858993460 result=40 07:47:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:53 Parameters OK 07:47:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:53 Set A/D data flow result=40 07:47:53 Set A/D channel type result=40 07:47:53 Set A/D encoding result=40 07:47:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:53 Set channel filter=0.000000e+000 result=40 07:47:53 Config A/D Result=40 07:47:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:53 Get A/D filter: -9.255963e+061 result=40 07:47:53 Get A/D value=-858993460 result=40 07:47:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:53 Aux= 07:47:53 Message to Camera, serial 44373 queued 07:48:30 Received message from Master: op=PointingHead serial=44386 07:48:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:48:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:48:30 Point started: ret=0 07:48:30 point_skyscan result=0 07:48:31 Check angles 07:48:31 SkyScan query 07:48:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:48:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:48:31 Message to Master queued w/err=0: serial=44386 error=0 07:48:36 Received message from Master: op=Filter serial=44387 07:48:36 Color wheel filter change from 0 to 0 07:48:36 FLIGetFilterPos err=0 currentPosition=0 07:48:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:36 Filter is already there-color wheel unchanged 07:48:36 Received message from Master: op=Shutter serial=44388 07:48:36 Shutter LASER close 07:48:36 Received message from Camera: op=State serial=44390 07:48:36 GetSingleValue result=40 Value=cccccccc 07:48:36 SkyScan query 07:48:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:48:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:37 Parameters OK 07:48:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:37 Set A/D data flow result=40 07:48:37 Set A/D channel type result=40 07:48:37 Set A/D encoding result=40 07:48:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:37 Set channel filter=0.000000e+000 result=40 07:48:37 Config A/D Result=40 07:48:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:37 Get A/D filter: -9.255963e+061 result=40 07:48:37 Get A/D value=-858993460 result=40 07:48:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:37 Parameters OK 07:48:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:37 Set A/D data flow result=40 07:48:37 Set A/D channel type result=40 07:48:37 Set A/D encoding result=40 07:48:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:37 Set channel filter=0.000000e+000 result=40 07:48:37 Config A/D Result=40 07:48:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:37 Get A/D filter: -9.255963e+061 result=40 07:48:37 Get A/D value=-858993460 result=40 07:48:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:37 Aux= 07:48:37 Message to Camera, serial 44390 queued 07:49:14 Received message from Master: op=PointingHead serial=44403 07:49:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:49:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:49:14 Point started: ret=0 07:49:14 point_skyscan result=0 07:49:15 Check angles 07:49:15 SkyScan query 07:49:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:49:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:49:16 Message to Master queued w/err=0: serial=44403 error=0 07:49:21 Received message from Master: op=Filter serial=44404 07:49:21 Color wheel filter change from 0 to 0 07:49:21 FLIGetFilterPos err=0 currentPosition=0 07:49:21 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:21 Filter is already there-color wheel unchanged 07:49:21 Received message from Master: op=Shutter serial=44405 07:49:21 Shutter LASER close 07:49:21 Received message from Camera: op=State serial=44407 07:49:21 GetSingleValue result=40 Value=cccccccc 07:49:21 SkyScan query 07:49:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:49:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:21 Parameters OK 07:49:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:21 Set A/D data flow result=40 07:49:21 Set A/D channel type result=40 07:49:21 Set A/D encoding result=40 07:49:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:21 Set channel filter=0.000000e+000 result=40 07:49:21 Config A/D Result=40 07:49:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:21 Get A/D filter: -9.255963e+061 result=40 07:49:21 Get A/D value=-858993460 result=40 07:49:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:21 Parameters OK 07:49:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:21 Set A/D data flow result=40 07:49:21 Set A/D channel type result=40 07:49:21 Set A/D encoding result=40 07:49:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:21 Set channel filter=0.000000e+000 result=40 07:49:21 Config A/D Result=40 07:49:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:21 Get A/D filter: -9.255963e+061 result=40 07:49:21 Get A/D value=-858993460 result=40 07:49:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:21 Aux= 07:49:21 Message to Camera, serial 44407 queued 07:49:58 Received message from Master: op=PointingHead serial=44420 07:49:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:49:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:49:58 Point started: ret=0 07:49:58 point_skyscan result=0 07:49:59 Check angles 07:49:59 SkyScan query 07:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:50:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:50:00 Message to Master queued w/err=0: serial=44420 error=0 07:50:05 Received message from Master: op=Filter serial=44421 07:50:05 Color wheel filter change from 0 to 0 07:50:05 FLIGetFilterPos err=0 currentPosition=0 07:50:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:05 Filter is already there-color wheel unchanged 07:50:05 Received message from Master: op=Shutter serial=44422 07:50:05 Shutter LASER close 07:50:05 Received message from Camera: op=State serial=44424 07:50:05 GetSingleValue result=40 Value=cccccccc 07:50:05 SkyScan query 07:50:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:50:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:06 Parameters OK 07:50:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:06 Set A/D data flow result=40 07:50:06 Set A/D channel type result=40 07:50:06 Set A/D encoding result=40 07:50:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:06 Set channel filter=0.000000e+000 result=40 07:50:06 Config A/D Result=40 07:50:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:06 Get A/D filter: -9.255963e+061 result=40 07:50:06 Get A/D value=-858993460 result=40 07:50:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:06 Parameters OK 07:50:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:06 Set A/D data flow result=40 07:50:06 Set A/D channel type result=40 07:50:06 Set A/D encoding result=40 07:50:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:06 Set channel filter=0.000000e+000 result=40 07:50:06 Config A/D Result=40 07:50:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:06 Get A/D filter: -9.255963e+061 result=40 07:50:06 Get A/D value=-858993460 result=40 07:50:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:06 Aux= 07:50:06 Message to Camera, serial 44424 queued 07:50:42 Received message from Master: op=PointingHead serial=44437 07:50:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:50:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:50:43 Point started: ret=0 07:50:43 point_skyscan result=0 07:50:44 Check angles 07:50:44 SkyScan query 07:50:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 07:50:44 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 07:50:44 Check angles 07:50:44 SkyScan query 07:50:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.61<-14974 Statuses=0008 0009 07:50:45 Msec=750 True Az=112.995 Ze=-44.61 Az status=0008 Ze status=0009 07:50:45 Check angles 07:50:45 SkyScan query 07:50:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 07:50:46 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 07:50:46 Check angles 07:50:46 SkyScan query 07:50:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 07:50:46 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 07:50:47 Check angles 07:50:47 SkyScan query 07:50:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.895<-19193 Statuses=0008 0009 07:50:47 Msec=3000 True Az=112.995 Ze=-107.895 Az status=0008 Ze status=0009 07:50:47 Check angles 07:50:47 SkyScan query 07:50:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.285<-20619 Statuses=0008 0009 07:50:48 Msec=3750 True Az=112.995 Ze=-129.285 Az status=0008 Ze status=0009 07:50:48 Check angles 07:50:48 SkyScan query 07:50:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.24<-22016 Statuses=0008 0009 07:50:49 Msec=4500 True Az=112.995 Ze=-150.24 Az status=0008 Ze status=0009 07:50:49 Check angles 07:50:49 SkyScan query 07:50:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0008 0009 07:50:49 Msec=5250 True Az=112.995 Ze=-171.045 Az status=0008 Ze status=0009 07:50:50 Check angles 07:50:50 SkyScan query 07:50:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:50:50 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:50:50 Message to Master queued w/err=0: serial=44437 error=0 07:50:55 Received message from Master: op=Filter serial=44438 07:50:55 Color wheel filter change from 0 to 0 07:50:55 FLIGetFilterPos err=0 currentPosition=0 07:50:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:55 Filter is already there-color wheel unchanged 07:50:55 Received message from Master: op=Shutter serial=44439 07:50:55 Shutter LASER open 07:50:56 Received message from Camera: op=State serial=44441 07:50:56 GetSingleValue result=40 Value=cccccccc 07:50:56 SkyScan query 07:50:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:50:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:56 Parameters OK 07:50:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:56 Set A/D data flow result=40 07:50:56 Set A/D channel type result=40 07:50:56 Set A/D encoding result=40 07:50:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:56 Set channel filter=0.000000e+000 result=40 07:50:56 Config A/D Result=40 07:50:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:56 Get A/D filter: -9.255963e+061 result=40 07:50:56 Get A/D value=-858993460 result=40 07:50:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:56 Parameters OK 07:50:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:56 Set A/D data flow result=40 07:50:56 Set A/D channel type result=40 07:50:56 Set A/D encoding result=40 07:50:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:56 Set channel filter=0.000000e+000 result=40 07:50:56 Config A/D Result=40 07:50:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:56 Get A/D filter: -9.255963e+061 result=40 07:50:56 Get A/D value=-858993460 result=40 07:50:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:56 Aux= 07:50:56 Message to Camera, serial 44441 queued 07:51:05 Received message from Master: op=Shutter serial=44451 07:51:05 Shutter LASER close 07:51:05 Received message from Master: op=PointingHead serial=44455 07:51:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:51:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:51:05 Point started: ret=0 07:51:05 point_skyscan result=0 07:51:06 Check angles 07:51:06 SkyScan query 07:51:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 07:51:07 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 07:51:07 Check angles 07:51:07 SkyScan query 07:51:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 07:51:08 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 07:51:08 Check angles 07:51:08 SkyScan query 07:51:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 07:51:08 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 07:51:08 Check angles 07:51:08 SkyScan query 07:51:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.89<-17326 Statuses=0008 0009 07:51:09 Msec=2250 True Az=112.995 Ze=-79.89 Az status=0008 Ze status=0009 07:51:09 Check angles 07:51:09 SkyScan query 07:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.47<-15898 Statuses=0008 0009 07:51:10 Msec=3000 True Az=112.995 Ze=-58.47 Az status=0008 Ze status=0009 07:51:10 Check angles 07:51:10 SkyScan query 07:51:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 07:51:11 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 07:51:11 Check angles 07:51:11 SkyScan query 07:51:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.575<-13105 Statuses=0008 0009 07:51:11 Msec=4500 True Az=112.995 Ze=-16.575 Az status=0008 Ze status=0009 07:51:11 Check angles 07:51:11 SkyScan query 07:51:12 SkyScan query done: ret=0 az=112.995<-7533 ze=4.32<-11712 Statuses=0008 0009 07:51:12 Msec=5250 True Az=112.995 Ze=4.32 Az status=0008 Ze status=0009 07:51:12 Check angles 07:51:12 SkyScan query 07:51:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:51:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:51:13 Message to Master queued w/err=0: serial=44455 error=0 07:51:18 Received message from Master: op=Filter serial=44456 07:51:18 Color wheel filter change from 0 to 0 07:51:18 FLIGetFilterPos err=0 currentPosition=0 07:51:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:18 Filter is already there-color wheel unchanged 07:51:18 Received message from Master: op=Shutter serial=44457 07:51:18 Shutter LASER close 07:51:18 Received message from Camera: op=State serial=44459 07:51:18 GetSingleValue result=40 Value=cccccccc 07:51:18 SkyScan query 07:51:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:51:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:19 Parameters OK 07:51:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:19 Set A/D data flow result=40 07:51:19 Set A/D channel type result=40 07:51:19 Set A/D encoding result=40 07:51:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:19 Set channel filter=0.000000e+000 result=40 07:51:19 Config A/D Result=40 07:51:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:19 Get A/D filter: -9.255963e+061 result=40 07:51:19 Get A/D value=-858993460 result=40 07:51:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:19 Parameters OK 07:51:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:19 Set A/D data flow result=40 07:51:19 Set A/D channel type result=40 07:51:19 Set A/D encoding result=40 07:51:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:19 Set channel filter=0.000000e+000 result=40 07:51:19 Config A/D Result=40 07:51:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:19 Get A/D filter: -9.255963e+061 result=40 07:51:19 Get A/D value=-858993460 result=40 07:51:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:19 Aux= 07:51:19 Message to Camera, serial 44459 queued 07:51:56 Received message from Master: op=PointingHead serial=44472 07:51:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:51:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:51:56 Point started: ret=0 07:51:56 point_skyscan result=0 07:51:57 Check angles 07:51:57 SkyScan query 07:51:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:51:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:51:57 Message to Master queued w/err=0: serial=44472 error=0 07:52:02 Received message from Master: op=Filter serial=44473 07:52:02 Color wheel filter change from 0 to 0 07:52:02 FLIGetFilterPos err=0 currentPosition=0 07:52:02 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:02 Filter is already there-color wheel unchanged 07:52:02 Received message from Master: op=Shutter serial=44474 07:52:02 Shutter LASER close 07:52:02 Received message from Camera: op=State serial=44476 07:52:02 GetSingleValue result=40 Value=cccccccc 07:52:02 SkyScan query 07:52:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:52:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:03 Parameters OK 07:52:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:03 Set A/D data flow result=40 07:52:03 Set A/D channel type result=40 07:52:03 Set A/D encoding result=40 07:52:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:03 Set channel filter=0.000000e+000 result=40 07:52:03 Config A/D Result=40 07:52:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:03 Get A/D filter: -9.255963e+061 result=40 07:52:03 Get A/D value=-858993460 result=40 07:52:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:03 Parameters OK 07:52:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:03 Set A/D data flow result=40 07:52:03 Set A/D channel type result=40 07:52:03 Set A/D encoding result=40 07:52:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:03 Set channel filter=0.000000e+000 result=40 07:52:03 Config A/D Result=40 07:52:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:03 Get A/D filter: -9.255963e+061 result=40 07:52:03 Get A/D value=-858993460 result=40 07:52:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:03 Aux= 07:52:03 Message to Camera, serial 44476 queued 07:52:39 Received message from Master: op=PointingHead serial=44488 07:52:39 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:52:39 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:52:39 Point started: ret=0 07:52:39 point_skyscan result=0 07:52:40 Check angles 07:52:40 SkyScan query 07:52:41 SkyScan query done: ret=0 az=135.99<-9066 ze=-6.51<-12434 Statuses=0009 0008 07:52:41 Msec=0 True Az=135.99 Ze=-6.51 Az status=0009 Ze status=0008 07:52:41 Check angles 07:52:41 SkyScan query 07:52:41 SkyScan query done: ret=0 az=153.9<-10260 ze=-6.495<-12433 Statuses=0009 0008 07:52:41 Msec=750 True Az=153.9 Ze=-6.495 Az status=0009 Ze status=0008 07:52:42 Check angles 07:52:42 SkyScan query 07:52:42 SkyScan query done: ret=0 az=171.39<-11426 ze=-6.495<-12433 Statuses=0009 0008 07:52:42 Msec=1500 True Az=171.39 Ze=-6.495 Az status=0009 Ze status=0008 07:52:42 Check angles 07:52:42 SkyScan query 07:52:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:52:43 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:52:43 Message to Master queued w/err=0: serial=44488 error=0 07:52:48 Received message from Master: op=Filter serial=44489 07:52:48 Color wheel filter change from 0 to 0 07:52:48 FLIGetFilterPos err=0 currentPosition=0 07:52:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:48 Filter is already there-color wheel unchanged 07:52:48 Received message from Master: op=Shutter serial=44490 07:52:48 Shutter LASER close 07:52:48 Received message from Camera: op=State serial=44492 07:52:48 GetSingleValue result=40 Value=cccccccc 07:52:48 SkyScan query 07:52:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:52:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:49 Parameters OK 07:52:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:49 Set A/D data flow result=40 07:52:49 Set A/D channel type result=40 07:52:49 Set A/D encoding result=40 07:52:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:49 Set channel filter=0.000000e+000 result=40 07:52:49 Config A/D Result=40 07:52:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:49 Get A/D filter: -9.255963e+061 result=40 07:52:49 Get A/D value=-858993460 result=40 07:52:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:49 Parameters OK 07:52:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:49 Set A/D data flow result=40 07:52:49 Set A/D channel type result=40 07:52:49 Set A/D encoding result=40 07:52:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:49 Set channel filter=0.000000e+000 result=40 07:52:49 Config A/D Result=40 07:52:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:49 Get A/D filter: -9.255963e+061 result=40 07:52:49 Get A/D value=-858993460 result=40 07:52:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:49 Aux= 07:52:49 Message to Camera, serial 44492 queued 07:53:26 Received message from Master: op=PointingHead serial=44505 07:53:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:53:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:53:26 Point started: ret=0 07:53:26 point_skyscan result=0 07:53:27 Check angles 07:53:27 SkyScan query 07:53:27 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 07:53:27 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 07:53:27 Check angles 07:53:27 SkyScan query 07:53:28 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 07:53:28 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 07:53:28 Check angles 07:53:28 SkyScan query 07:53:29 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 07:53:29 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 07:53:29 Check angles 07:53:29 SkyScan query 07:53:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:53:29 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:53:29 Message to Master queued w/err=0: serial=44505 error=0 07:53:34 Received message from Master: op=Filter serial=44506 07:53:34 Color wheel filter change from 0 to 0 07:53:34 FLIGetFilterPos err=0 currentPosition=0 07:53:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:34 Filter is already there-color wheel unchanged 07:53:35 Received message from Master: op=Shutter serial=44507 07:53:35 Shutter LASER close 07:53:35 Received message from Camera: op=State serial=44509 07:53:35 GetSingleValue result=40 Value=cccccccc 07:53:35 SkyScan query 07:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:53:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:35 Parameters OK 07:53:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:35 Set A/D data flow result=40 07:53:35 Set A/D channel type result=40 07:53:35 Set A/D encoding result=40 07:53:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:35 Set channel filter=0.000000e+000 result=40 07:53:35 Config A/D Result=40 07:53:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:35 Get A/D filter: -9.255963e+061 result=40 07:53:35 Get A/D value=-858993460 result=40 07:53:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:35 Parameters OK 07:53:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:35 Set A/D data flow result=40 07:53:35 Set A/D channel type result=40 07:53:35 Set A/D encoding result=40 07:53:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:35 Set channel filter=0.000000e+000 result=40 07:53:35 Config A/D Result=40 07:53:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:35 Get A/D filter: -9.255963e+061 result=40 07:53:35 Get A/D value=-858993460 result=40 07:53:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:35 Aux= 07:53:35 Message to Camera, serial 44509 queued 07:54:12 Received message from Master: op=PointingHead serial=44522 07:54:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:54:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:54:12 Point started: ret=0 07:54:12 point_skyscan result=0 07:54:13 Check angles 07:54:13 SkyScan query 07:54:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 07:54:14 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 [UTC 2019-3-1 07:54:14] 07:54:14 Check angles 07:54:14 SkyScan query 07:54:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.96<-15064 Statuses=0008 0009 07:54:15 Msec=750 True Az=112.995 Ze=-45.96 Az status=0008 Ze status=0009 07:54:15 Check angles 07:54:15 SkyScan query 07:54:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 07:54:15 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 07:54:15 Check angles 07:54:15 SkyScan query 07:54:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.595<-17773 Statuses=0008 0009 07:54:16 Msec=2250 True Az=112.995 Ze=-86.595 Az status=0008 Ze status=0009 07:54:16 Check angles 07:54:16 SkyScan query 07:54:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.535<-19169 Statuses=0008 0009 07:54:17 Msec=3000 True Az=112.995 Ze=-107.535 Az status=0008 Ze status=0009 07:54:17 Check angles 07:54:17 SkyScan query 07:54:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.475<-20565 Statuses=0008 0009 07:54:18 Msec=3750 True Az=112.995 Ze=-128.475 Az status=0008 Ze status=0009 07:54:18 Check angles 07:54:18 SkyScan query 07:54:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.88<-21992 Statuses=0008 0009 07:54:18 Msec=4500 True Az=112.995 Ze=-149.88 Az status=0008 Ze status=0009 07:54:18 Check angles 07:54:18 SkyScan query 07:54:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 07:54:19 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 07:54:19 Check angles 07:54:19 SkyScan query 07:54:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:54:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:54:20 Message to Master queued w/err=0: serial=44522 error=0 07:54:25 Received message from Master: op=Filter serial=44523 07:54:25 Color wheel filter change from 0 to 0 07:54:25 FLIGetFilterPos err=0 currentPosition=0 07:54:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:25 Filter is already there-color wheel unchanged 07:54:25 Received message from Master: op=Shutter serial=44524 07:54:25 Shutter LASER open 07:54:25 Received message from Camera: op=State serial=44526 07:54:25 GetSingleValue result=40 Value=cccccccc 07:54:25 SkyScan query 07:54:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:54:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:26 Parameters OK 07:54:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:26 Set A/D data flow result=40 07:54:26 Set A/D channel type result=40 07:54:26 Set A/D encoding result=40 07:54:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:26 Set channel filter=0.000000e+000 result=40 07:54:26 Config A/D Result=40 07:54:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:26 Get A/D filter: -9.255963e+061 result=40 07:54:26 Get A/D value=-858993460 result=40 07:54:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:26 Parameters OK 07:54:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:26 Set A/D data flow result=40 07:54:26 Set A/D channel type result=40 07:54:26 Set A/D encoding result=40 07:54:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:26 Set channel filter=0.000000e+000 result=40 07:54:26 Config A/D Result=40 07:54:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:26 Get A/D filter: -9.255963e+061 result=40 07:54:26 Get A/D value=-858993460 result=40 07:54:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:26 Aux= 07:54:26 Message to Camera, serial 44526 queued 07:54:34 Received message from Master: op=Shutter serial=44536 07:54:34 Shutter LASER close 07:54:35 Received message from Master: op=PointingHead serial=44540 07:54:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:54:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:54:35 Point started: ret=0 07:54:35 point_skyscan result=0 07:54:36 Check angles 07:54:36 SkyScan query 07:54:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 07:54:36 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 07:54:37 Check angles 07:54:37 SkyScan query 07:54:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 07:54:37 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 07:54:37 Check angles 07:54:37 SkyScan query 07:54:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 07:54:38 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 07:54:38 Check angles 07:54:38 SkyScan query 07:54:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.365<-17291 Statuses=0008 0009 07:54:39 Msec=2250 True Az=112.995 Ze=-79.365 Az status=0008 Ze status=0009 07:54:39 Check angles 07:54:39 SkyScan query 07:54:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.41<-15894 Statuses=0008 0009 07:54:39 Msec=3000 True Az=112.995 Ze=-58.41 Az status=0008 Ze status=0009 07:54:40 Check angles 07:54:40 SkyScan query 07:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.485<-14499 Statuses=0008 0009 07:54:40 Msec=3750 True Az=112.995 Ze=-37.485 Az status=0008 Ze status=0009 07:54:40 Check angles 07:54:40 SkyScan query 07:54:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.515<-13101 Statuses=0008 0009 07:54:41 Msec=4500 True Az=112.995 Ze=-16.515 Az status=0008 Ze status=0009 07:54:41 Check angles 07:54:41 SkyScan query 07:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=4.35<-11710 Statuses=0008 0009 07:54:42 Msec=5250 True Az=112.995 Ze=4.35 Az status=0008 Ze status=0009 07:54:42 Check angles 07:54:42 SkyScan query 07:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:54:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:54:42 Message to Master queued w/err=0: serial=44540 error=0 07:54:47 Received message from Master: op=Filter serial=44541 07:54:47 Color wheel filter change from 0 to 0 07:54:47 FLIGetFilterPos err=0 currentPosition=0 07:54:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:47 Filter is already there-color wheel unchanged 07:54:48 Received message from Master: op=Shutter serial=44542 07:54:48 Shutter LASER close 07:54:48 Received message from Camera: op=State serial=44544 07:54:48 GetSingleValue result=40 Value=cccccccc 07:54:48 SkyScan query 07:54:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:54:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:48 Parameters OK 07:54:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:48 Set A/D data flow result=40 07:54:48 Set A/D channel type result=40 07:54:48 Set A/D encoding result=40 07:54:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:48 Set channel filter=0.000000e+000 result=40 07:54:48 Config A/D Result=40 07:54:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:48 Get A/D filter: -9.255963e+061 result=40 07:54:48 Get A/D value=-858993460 result=40 07:54:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:48 Parameters OK 07:54:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:48 Set A/D data flow result=40 07:54:48 Set A/D channel type result=40 07:54:48 Set A/D encoding result=40 07:54:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:48 Set channel filter=0.000000e+000 result=40 07:54:48 Config A/D Result=40 07:54:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:48 Get A/D filter: -9.255963e+061 result=40 07:54:48 Get A/D value=-858993460 result=40 07:54:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:48 Aux= 07:54:48 Message to Camera, serial 44544 queued 07:55:25 Received message from Master: op=PointingHead serial=44557 07:55:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:55:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:55:25 Point started: ret=0 07:55:25 point_skyscan result=0 07:55:26 Check angles 07:55:26 SkyScan query 07:55:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:55:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:55:27 Message to Master queued w/err=0: serial=44557 error=0 07:55:32 Received message from Master: op=Filter serial=44558 07:55:32 Color wheel filter change from 0 to 0 07:55:32 FLIGetFilterPos err=0 currentPosition=0 07:55:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:55:32 Filter is already there-color wheel unchanged 07:55:32 Received message from Master: op=Shutter serial=44559 07:55:32 Shutter LASER close 07:55:32 Received message from Camera: op=State serial=44561 07:55:32 GetSingleValue result=40 Value=cccccccc 07:55:32 SkyScan query 07:55:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:55:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:33 Parameters OK 07:55:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:33 Set A/D data flow result=40 07:55:33 Set A/D channel type result=40 07:55:33 Set A/D encoding result=40 07:55:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:33 Set channel filter=0.000000e+000 result=40 07:55:33 Config A/D Result=40 07:55:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:33 Get A/D filter: -9.255963e+061 result=40 07:55:33 Get A/D value=-858993460 result=40 07:55:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:33 Parameters OK 07:55:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:33 Set A/D data flow result=40 07:55:33 Set A/D channel type result=40 07:55:33 Set A/D encoding result=40 07:55:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:33 Set channel filter=0.000000e+000 result=40 07:55:33 Config A/D Result=40 07:55:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:33 Get A/D filter: -9.255963e+061 result=40 07:55:33 Get A/D value=-858993460 result=40 07:55:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:55:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:55:33 Aux= 07:55:33 Message to Camera, serial 44561 queued 07:56:09 Received message from Master: op=PointingHead serial=44574 07:56:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:56:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:56:10 Point started: ret=0 07:56:10 point_skyscan result=0 07:56:10 Check angles 07:56:10 SkyScan query 07:56:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:56:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:56:11 Message to Master queued w/err=0: serial=44574 error=0 07:56:16 Received message from Master: op=Filter serial=44575 07:56:16 Color wheel filter change from 0 to 0 07:56:16 FLIGetFilterPos err=0 currentPosition=0 07:56:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:16 Filter is already there-color wheel unchanged 07:56:16 Received message from Master: op=Shutter serial=44576 07:56:16 Shutter LASER close 07:56:16 Received message from Camera: op=State serial=44578 07:56:16 GetSingleValue result=40 Value=cccccccc 07:56:16 SkyScan query 07:56:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:56:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:17 Parameters OK 07:56:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:17 Set A/D data flow result=40 07:56:17 Set A/D channel type result=40 07:56:17 Set A/D encoding result=40 07:56:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:17 Set channel filter=0.000000e+000 result=40 07:56:17 Config A/D Result=40 07:56:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:17 Get A/D filter: -9.255963e+061 result=40 07:56:17 Get A/D value=-858993460 result=40 07:56:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:17 Parameters OK 07:56:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:17 Set A/D data flow result=40 07:56:17 Set A/D channel type result=40 07:56:17 Set A/D encoding result=40 07:56:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:17 Set channel filter=0.000000e+000 result=40 07:56:17 Config A/D Result=40 07:56:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:17 Get A/D filter: -9.255963e+061 result=40 07:56:17 Get A/D value=-858993460 result=40 07:56:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:17 Aux= 07:56:17 Message to Camera, serial 44578 queued 07:56:54 Received message from Master: op=PointingHead serial=44591 07:56:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:56:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:56:54 Point started: ret=0 07:56:54 point_skyscan result=0 07:56:55 Check angles 07:56:55 SkyScan query 07:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:56:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:56:55 Message to Master queued w/err=0: serial=44591 error=0 07:57:00 Received message from Master: op=Filter serial=44592 07:57:00 Color wheel filter change from 0 to 0 07:57:00 FLIGetFilterPos err=0 currentPosition=0 07:57:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:00 Filter is already there-color wheel unchanged 07:57:01 Received message from Master: op=Shutter serial=44593 07:57:01 Shutter LASER close 07:57:01 Received message from Camera: op=State serial=44595 07:57:01 GetSingleValue result=40 Value=cccccccc 07:57:01 SkyScan query 07:57:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:57:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:01 Parameters OK 07:57:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:01 Set A/D data flow result=40 07:57:01 Set A/D channel type result=40 07:57:01 Set A/D encoding result=40 07:57:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:01 Set channel filter=0.000000e+000 result=40 07:57:01 Config A/D Result=40 07:57:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:01 Get A/D filter: -9.255963e+061 result=40 07:57:01 Get A/D value=-858993460 result=40 07:57:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:01 Parameters OK 07:57:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:01 Set A/D data flow result=40 07:57:01 Set A/D channel type result=40 07:57:01 Set A/D encoding result=40 07:57:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:01 Set channel filter=0.000000e+000 result=40 07:57:01 Config A/D Result=40 07:57:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:01 Get A/D filter: -9.255963e+061 result=40 07:57:01 Get A/D value=-858993460 result=40 07:57:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:01 Aux= 07:57:01 Message to Camera, serial 44595 queued 07:57:37 Received message from Master: op=PointingHead serial=44607 07:57:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:57:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:57:37 Point started: ret=0 07:57:37 point_skyscan result=0 07:57:38 Check angles 07:57:38 SkyScan query 07:57:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 07:57:39 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 07:57:39 Check angles 07:57:39 SkyScan query 07:57:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 07:57:39 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 07:57:40 Check angles 07:57:40 SkyScan query 07:57:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 07:57:40 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 07:57:40 Check angles 07:57:40 SkyScan query 07:57:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 07:57:41 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 07:57:41 Check angles 07:57:41 SkyScan query 07:57:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.43<-19162 Statuses=0008 0009 07:57:42 Msec=3000 True Az=112.995 Ze=-107.43 Az status=0008 Ze status=0009 07:57:42 Check angles 07:57:42 SkyScan query 07:57:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 07:57:42 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 07:57:43 Check angles 07:57:43 SkyScan query 07:57:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.745<-21983 Statuses=0008 0009 07:57:43 Msec=4500 True Az=112.995 Ze=-149.745 Az status=0008 Ze status=0009 07:57:43 Check angles 07:57:43 SkyScan query 07:57:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 07:57:44 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 07:57:44 Check angles 07:57:44 SkyScan query 07:57:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:57:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:57:45 Message to Master queued w/err=0: serial=44607 error=0 07:57:50 Received message from Master: op=Filter serial=44608 07:57:50 Color wheel filter change from 0 to 0 07:57:50 FLIGetFilterPos err=0 currentPosition=0 07:57:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:50 Filter is already there-color wheel unchanged 07:57:50 Received message from Master: op=Shutter serial=44609 07:57:50 Shutter LASER open 07:57:50 Received message from Camera: op=State serial=44611 07:57:50 GetSingleValue result=40 Value=cccccccc 07:57:50 SkyScan query 07:57:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:57:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:51 Parameters OK 07:57:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:51 Set A/D data flow result=40 07:57:51 Set A/D channel type result=40 07:57:51 Set A/D encoding result=40 07:57:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:51 Set channel filter=0.000000e+000 result=40 07:57:51 Config A/D Result=40 07:57:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:51 Get A/D filter: -9.255963e+061 result=40 07:57:51 Get A/D value=-858993460 result=40 07:57:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:51 Parameters OK 07:57:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:51 Set A/D data flow result=40 07:57:51 Set A/D channel type result=40 07:57:51 Set A/D encoding result=40 07:57:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:51 Set channel filter=0.000000e+000 result=40 07:57:51 Config A/D Result=40 07:57:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:51 Get A/D filter: -9.255963e+061 result=40 07:57:51 Get A/D value=-858993460 result=40 07:57:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:51 Aux= 07:57:51 Message to Camera, serial 44611 queued 07:57:59 Received message from Master: op=Shutter serial=44621 07:57:59 Shutter LASER close 07:58:00 Received message from Master: op=PointingHead serial=44625 07:58:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:58:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:58:00 Point started: ret=0 07:58:00 point_skyscan result=0 07:58:01 Check angles 07:58:01 SkyScan query 07:58:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 07:58:01 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 07:58:02 Check angles 07:58:02 SkyScan query 07:58:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.01<-20134 Statuses=0008 0009 07:58:02 Msec=750 True Az=112.995 Ze=-122.01 Az status=0008 Ze status=0009 07:58:02 Check angles 07:58:02 SkyScan query 07:58:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.635<-18709 Statuses=0008 0009 07:58:03 Msec=1500 True Az=112.995 Ze=-100.635 Az status=0008 Ze status=0009 07:58:03 Check angles 07:58:03 SkyScan query 07:58:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.665<-17311 Statuses=0008 0009 07:58:04 Msec=2250 True Az=112.995 Ze=-79.665 Az status=0008 Ze status=0009 07:58:04 Check angles 07:58:04 SkyScan query 07:58:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.275<-15885 Statuses=0008 0009 07:58:04 Msec=3000 True Az=112.995 Ze=-58.275 Az status=0008 Ze status=0009 07:58:05 Check angles 07:58:05 SkyScan query 07:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.885<-14459 Statuses=0008 0009 07:58:05 Msec=3750 True Az=112.995 Ze=-36.885 Az status=0008 Ze status=0009 07:58:05 Check angles 07:58:05 SkyScan query 07:58:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.9<-13060 Statuses=0008 0009 07:58:06 Msec=4500 True Az=112.995 Ze=-15.9 Az status=0008 Ze status=0009 07:58:06 Check angles 07:58:06 SkyScan query 07:58:07 SkyScan query done: ret=0 az=112.995<-7533 ze=4.83<-11678 Statuses=0008 0009 07:58:07 Msec=5250 True Az=112.995 Ze=4.83 Az status=0008 Ze status=0009 07:58:07 Check angles 07:58:07 SkyScan query 07:58:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:58:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:58:07 Message to Master queued w/err=0: serial=44625 error=0 07:58:12 Received message from Master: op=Filter serial=44626 07:58:12 Color wheel filter change from 0 to 0 07:58:12 FLIGetFilterPos err=0 currentPosition=0 07:58:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:12 Filter is already there-color wheel unchanged 07:58:13 Received message from Master: op=Shutter serial=44627 07:58:13 Shutter LASER close 07:58:13 Received message from Camera: op=State serial=44629 07:58:13 GetSingleValue result=40 Value=cccccccc 07:58:13 SkyScan query 07:58:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:13 Parameters OK 07:58:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:13 Set A/D data flow result=40 07:58:13 Set A/D channel type result=40 07:58:13 Set A/D encoding result=40 07:58:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:13 Set channel filter=0.000000e+000 result=40 07:58:13 Config A/D Result=40 07:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:13 Get A/D filter: -9.255963e+061 result=40 07:58:13 Get A/D value=-858993460 result=40 07:58:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:13 Parameters OK 07:58:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:13 Set A/D data flow result=40 07:58:13 Set A/D channel type result=40 07:58:13 Set A/D encoding result=40 07:58:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:13 Set channel filter=0.000000e+000 result=40 07:58:13 Config A/D Result=40 07:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:13 Get A/D filter: -9.255963e+061 result=40 07:58:13 Get A/D value=-858993460 result=40 07:58:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:13 Aux= 07:58:13 Message to Camera, serial 44629 queued 07:58:50 Received message from Master: op=PointingHead serial=44642 07:58:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:58:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:58:51 Point started: ret=0 07:58:51 point_skyscan result=0 07:58:51 Check angles 07:58:51 SkyScan query 07:58:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:58:52 Message to Master queued w/err=0: serial=44642 error=0 07:58:57 Received message from Master: op=Filter serial=44643 07:58:57 Color wheel filter change from 0 to 0 07:58:57 FLIGetFilterPos err=0 currentPosition=0 07:58:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:57 Filter is already there-color wheel unchanged 07:58:57 Received message from Master: op=Shutter serial=44644 07:58:57 Shutter LASER close 07:58:57 Received message from Camera: op=State serial=44646 07:58:57 GetSingleValue result=40 Value=cccccccc 07:58:57 SkyScan query 07:58:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:58 Parameters OK 07:58:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:58 Set A/D data flow result=40 07:58:58 Set A/D channel type result=40 07:58:58 Set A/D encoding result=40 07:58:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:58 Set channel filter=0.000000e+000 result=40 07:58:58 Config A/D Result=40 07:58:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:58 Get A/D filter: -9.255963e+061 result=40 07:58:58 Get A/D value=-858993460 result=40 07:58:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:58 Parameters OK 07:58:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:58 Set A/D data flow result=40 07:58:58 Set A/D channel type result=40 07:58:58 Set A/D encoding result=40 07:58:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:58 Set channel filter=0.000000e+000 result=40 07:58:58 Config A/D Result=40 07:58:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:58 Get A/D filter: -9.255963e+061 result=40 07:58:58 Get A/D value=-858993460 result=40 07:58:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:58 Aux= 07:58:58 Message to Camera, serial 44646 queued 07:59:34 Received message from Master: op=PointingHead serial=44659 07:59:34 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:59:34 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:59:35 Point started: ret=0 07:59:35 point_skyscan result=0 07:59:36 Check angles 07:59:36 SkyScan query 07:59:36 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.495<-12433 Statuses=0009 0008 07:59:36 Msec=0 True Az=135.96 Ze=-6.495 Az status=0009 Ze status=0008 07:59:36 Check angles 07:59:36 SkyScan query 07:59:37 SkyScan query done: ret=0 az=153.54<-10236 ze=-6.48<-12432 Statuses=0009 0008 07:59:37 Msec=750 True Az=153.54 Ze=-6.48 Az status=0009 Ze status=0008 07:59:37 Check angles 07:59:37 SkyScan query 07:59:38 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.48<-12432 Statuses=0009 0008 07:59:38 Msec=1500 True Az=171.36 Ze=-6.48 Az status=0009 Ze status=0008 07:59:38 Check angles 07:59:38 SkyScan query 07:59:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 07:59:38 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 07:59:38 Message to Master queued w/err=0: serial=44659 error=0 07:59:43 Received message from Master: op=Filter serial=44660 07:59:43 Color wheel filter change from 0 to 0 07:59:43 FLIGetFilterPos err=0 currentPosition=0 07:59:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:43 Filter is already there-color wheel unchanged 07:59:44 Received message from Master: op=Shutter serial=44661 07:59:44 Shutter LASER close 07:59:44 Received message from Camera: op=State serial=44663 07:59:44 GetSingleValue result=40 Value=cccccccc 07:59:44 SkyScan query 07:59:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 07:59:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:44 Parameters OK 07:59:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:44 Set A/D data flow result=40 07:59:44 Set A/D channel type result=40 07:59:44 Set A/D encoding result=40 07:59:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:44 Set channel filter=0.000000e+000 result=40 07:59:44 Config A/D Result=40 07:59:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:44 Get A/D filter: -9.255963e+061 result=40 07:59:44 Get A/D value=-858993460 result=40 07:59:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:44 Parameters OK 07:59:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:44 Set A/D data flow result=40 07:59:44 Set A/D channel type result=40 07:59:44 Set A/D encoding result=40 07:59:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:44 Set channel filter=0.000000e+000 result=40 07:59:44 Config A/D Result=40 07:59:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:44 Get A/D filter: -9.255963e+061 result=40 07:59:44 Get A/D value=-858993460 result=40 07:59:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:44 Aux= 07:59:44 Message to Camera, serial 44663 queued 08:00:21 Received message from Master: op=PointingHead serial=44676 08:00:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:00:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:00:21 Point started: ret=0 08:00:21 point_skyscan result=0 08:00:22 Check angles 08:00:22 SkyScan query 08:00:23 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 08:00:23 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 08:00:23 Check angles 08:00:23 SkyScan query 08:00:23 SkyScan query done: ret=0 az=134.925<-8995 ze=6.495<-11567 Statuses=0009 0008 08:00:23 Msec=750 True Az=134.925 Ze=6.495 Az status=0009 Ze status=0008 08:00:24 Check angles 08:00:24 SkyScan query 08:00:24 SkyScan query done: ret=0 az=117.06<-7804 ze=6.495<-11567 Statuses=0009 0008 08:00:24 Msec=1500 True Az=117.06 Ze=6.495 Az status=0009 Ze status=0008 08:00:24 Check angles 08:00:24 SkyScan query 08:00:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:00:25 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:00:25 Message to Master queued w/err=0: serial=44676 error=0 08:00:30 Received message from Master: op=Filter serial=44677 08:00:30 Color wheel filter change from 0 to 0 08:00:30 FLIGetFilterPos err=0 currentPosition=0 08:00:30 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:30 Filter is already there-color wheel unchanged 08:00:30 Received message from Master: op=Shutter serial=44678 08:00:30 Shutter LASER close 08:00:30 Received message from Camera: op=State serial=44680 08:00:30 GetSingleValue result=40 Value=cccccccc 08:00:30 SkyScan query 08:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:00:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:31 Parameters OK 08:00:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:31 Set A/D data flow result=40 08:00:31 Set A/D channel type result=40 08:00:31 Set A/D encoding result=40 08:00:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:31 Set channel filter=0.000000e+000 result=40 08:00:31 Config A/D Result=40 08:00:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:31 Get A/D filter: -9.255963e+061 result=40 08:00:31 Get A/D value=-858993460 result=40 08:00:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:31 Parameters OK 08:00:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:31 Set A/D data flow result=40 08:00:31 Set A/D channel type result=40 08:00:31 Set A/D encoding result=40 08:00:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:31 Set channel filter=0.000000e+000 result=40 08:00:31 Config A/D Result=40 08:00:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:31 Get A/D filter: -9.255963e+061 result=40 08:00:31 Get A/D value=-858993460 result=40 08:00:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:31 Aux= 08:00:31 Message to Camera, serial 44680 queued 08:01:08 Received message from Master: op=PointingHead serial=44693 08:01:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:01:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:01:08 Point started: ret=0 08:01:08 point_skyscan result=0 08:01:09 Check angles 08:01:09 SkyScan query 08:01:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 08:01:09 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 08:01:09 Check angles 08:01:09 SkyScan query 08:01:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.85<-14990 Statuses=0008 0009 08:01:10 Msec=750 True Az=112.995 Ze=-44.85 Az status=0008 Ze status=0009 08:01:10 Check angles 08:01:10 SkyScan query 08:01:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.79<-16386 Statuses=0008 0009 08:01:11 Msec=1500 True Az=112.995 Ze=-65.79 Az status=0008 Ze status=0009 08:01:11 Check angles 08:01:11 SkyScan query 08:01:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.73<-17782 Statuses=0008 0009 08:01:12 Msec=2250 True Az=112.995 Ze=-86.73 Az status=0008 Ze status=0009 08:01:12 Check angles 08:01:12 SkyScan query 08:01:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 08:01:12 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 08:01:12 Check angles 08:01:12 SkyScan query 08:01:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 08:01:13 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 08:01:13 Check angles 08:01:13 SkyScan query 08:01:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 08:01:14 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 08:01:14 Check angles 08:01:14 SkyScan query 08:01:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 08:01:15 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 08:01:15 Check angles 08:01:15 SkyScan query 08:01:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:01:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:01:15 Message to Master queued w/err=0: serial=44693 error=0 08:01:20 Received message from Master: op=Filter serial=44694 08:01:20 Color wheel filter change from 0 to 0 08:01:20 FLIGetFilterPos err=0 currentPosition=0 08:01:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:20 Filter is already there-color wheel unchanged 08:01:20 Received message from Master: op=Shutter serial=44695 08:01:20 Shutter LASER open 08:01:21 Received message from Camera: op=State serial=44697 08:01:21 GetSingleValue result=40 Value=cccccccc 08:01:21 SkyScan query 08:01:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:01:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:21 Parameters OK 08:01:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:21 Set A/D data flow result=40 08:01:21 Set A/D channel type result=40 08:01:21 Set A/D encoding result=40 08:01:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:21 Set channel filter=0.000000e+000 result=40 08:01:21 Config A/D Result=40 08:01:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:21 Get A/D filter: -9.255963e+061 result=40 08:01:21 Get A/D value=-858993460 result=40 08:01:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:21 Parameters OK 08:01:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:21 Set A/D data flow result=40 08:01:21 Set A/D channel type result=40 08:01:21 Set A/D encoding result=40 08:01:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:21 Set channel filter=0.000000e+000 result=40 08:01:21 Config A/D Result=40 08:01:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:21 Get A/D filter: -9.255963e+061 result=40 08:01:21 Get A/D value=-858993460 result=40 08:01:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:21 Aux= 08:01:21 Message to Camera, serial 44697 queued 08:01:30 Received message from Master: op=Shutter serial=44707 08:01:30 Shutter LASER close 08:01:30 Received message from Master: op=PointingHead serial=44711 08:01:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:01:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:01:30 Point started: ret=0 08:01:30 point_skyscan result=0 08:01:31 Check angles 08:01:31 SkyScan query 08:01:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.1<-21540 Statuses=0008 0009 08:01:32 Msec=0 True Az=112.995 Ze=-143.1 Az status=0008 Ze status=0009 08:01:32 Check angles 08:01:32 SkyScan query 08:01:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 08:01:32 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 08:01:33 Check angles 08:01:33 SkyScan query 08:01:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.755<-18717 Statuses=0008 0009 08:01:33 Msec=1500 True Az=112.995 Ze=-100.755 Az status=0008 Ze status=0009 08:01:33 Check angles 08:01:33 SkyScan query 08:01:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.35<-17290 Statuses=0008 0009 08:01:34 Msec=2250 True Az=112.995 Ze=-79.35 Az status=0008 Ze status=0009 08:01:34 Check angles 08:01:34 SkyScan query 08:01:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.945<-15863 Statuses=0008 0009 08:01:35 Msec=3000 True Az=112.995 Ze=-57.945 Az status=0008 Ze status=0009 08:01:35 Check angles 08:01:35 SkyScan query 08:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.02<-14468 Statuses=0008 0009 08:01:36 Msec=3750 True Az=112.995 Ze=-37.02 Az status=0008 Ze status=0009 08:01:36 Check angles 08:01:36 SkyScan query 08:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.035<-13069 Statuses=0008 0009 08:01:36 Msec=4500 True Az=112.995 Ze=-16.035 Az status=0008 Ze status=0009 08:01:36 Check angles 08:01:36 SkyScan query 08:01:37 SkyScan query done: ret=0 az=112.995<-7533 ze=4.725<-11685 Statuses=0008 0009 08:01:37 Msec=5250 True Az=112.995 Ze=4.725 Az status=0008 Ze status=0009 08:01:37 Check angles 08:01:37 SkyScan query 08:01:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:01:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:01:38 Message to Master queued w/err=0: serial=44711 error=0 08:01:43 Received message from Master: op=Filter serial=44712 08:01:43 Color wheel filter change from 0 to 0 08:01:43 FLIGetFilterPos err=0 currentPosition=0 08:01:43 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:43 Filter is already there-color wheel unchanged 08:01:43 Received message from Master: op=Shutter serial=44713 08:01:43 Shutter LASER close 08:01:43 Received message from Camera: op=State serial=44715 08:01:43 GetSingleValue result=40 Value=cccccccc 08:01:43 SkyScan query 08:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:01:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:44 Parameters OK 08:01:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:44 Set A/D data flow result=40 08:01:44 Set A/D channel type result=40 08:01:44 Set A/D encoding result=40 08:01:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:44 Set channel filter=0.000000e+000 result=40 08:01:44 Config A/D Result=40 08:01:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:44 Get A/D filter: -9.255963e+061 result=40 08:01:44 Get A/D value=-858993460 result=40 08:01:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:44 Parameters OK 08:01:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:44 Set A/D data flow result=40 08:01:44 Set A/D channel type result=40 08:01:44 Set A/D encoding result=40 08:01:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:44 Set channel filter=0.000000e+000 result=40 08:01:44 Config A/D Result=40 08:01:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:44 Get A/D filter: -9.255963e+061 result=40 08:01:44 Get A/D value=-858993460 result=40 08:01:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:44 Aux= 08:01:44 Message to Camera, serial 44715 queued 08:02:21 Received message from Master: op=PointingHead serial=44728 08:02:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:02:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:02:21 Point started: ret=0 08:02:21 point_skyscan result=0 08:02:22 Check angles 08:02:22 SkyScan query 08:02:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:02:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:02:22 Message to Master queued w/err=0: serial=44728 error=0 08:02:27 Received message from Master: op=Filter serial=44729 08:02:27 Color wheel filter change from 0 to 0 08:02:27 FLIGetFilterPos err=0 currentPosition=0 08:02:27 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:27 Filter is already there-color wheel unchanged 08:02:27 Received message from Master: op=Shutter serial=44730 08:02:27 Shutter LASER close 08:02:27 Received message from Camera: op=State serial=44732 08:02:27 GetSingleValue result=40 Value=cccccccc 08:02:27 SkyScan query 08:02:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:02:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:28 Parameters OK 08:02:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:28 Set A/D data flow result=40 08:02:28 Set A/D channel type result=40 08:02:28 Set A/D encoding result=40 08:02:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:28 Set channel filter=0.000000e+000 result=40 08:02:28 Config A/D Result=40 08:02:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:28 Get A/D filter: -9.255963e+061 result=40 08:02:28 Get A/D value=-858993460 result=40 08:02:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:28 Parameters OK 08:02:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:28 Set A/D data flow result=40 08:02:28 Set A/D channel type result=40 08:02:28 Set A/D encoding result=40 08:02:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:28 Set channel filter=0.000000e+000 result=40 08:02:28 Config A/D Result=40 08:02:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:28 Get A/D filter: -9.255963e+061 result=40 08:02:28 Get A/D value=-858993460 result=40 08:02:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:28 Aux= 08:02:28 Message to Camera, serial 44732 queued 08:03:05 Received message from Master: op=PointingHead serial=44745 08:03:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:03:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:03:05 Point started: ret=0 08:03:05 point_skyscan result=0 08:03:06 Check angles 08:03:06 SkyScan query 08:03:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:03:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:03:07 Message to Master queued w/err=0: serial=44745 error=0 08:03:12 Received message from Master: op=Filter serial=44746 08:03:12 Color wheel filter change from 0 to 0 08:03:12 FLIGetFilterPos err=0 currentPosition=0 08:03:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:12 Filter is already there-color wheel unchanged 08:03:12 Received message from Master: op=Shutter serial=44747 08:03:12 Shutter LASER close 08:03:12 Received message from Camera: op=State serial=44749 08:03:12 GetSingleValue result=40 Value=cccccccc 08:03:12 SkyScan query 08:03:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:03:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:12 Parameters OK 08:03:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:12 Set A/D data flow result=40 08:03:12 Set A/D channel type result=40 08:03:12 Set A/D encoding result=40 08:03:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:12 Set channel filter=0.000000e+000 result=40 08:03:12 Config A/D Result=40 08:03:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:12 Get A/D filter: -9.255963e+061 result=40 08:03:12 Get A/D value=-858993460 result=40 08:03:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:12 Parameters OK 08:03:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:12 Set A/D data flow result=40 08:03:12 Set A/D channel type result=40 08:03:12 Set A/D encoding result=40 08:03:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:12 Set channel filter=0.000000e+000 result=40 08:03:12 Config A/D Result=40 08:03:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:12 Get A/D filter: -9.255963e+061 result=40 08:03:12 Get A/D value=-858993460 result=40 08:03:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:12 Aux= 08:03:12 Message to Camera, serial 44749 queued 08:03:38 Received message from Master: op=Identify serial=44750 08:03:48 Received message from Master: op=PointingHead serial=44764 08:03:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:03:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:03:49 Point started: ret=0 08:03:49 point_skyscan result=0 08:03:49 Check angles 08:03:49 SkyScan query 08:03:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:03:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:03:50 Message to Master queued w/err=0: serial=44764 error=0 [UTC 2019-3-1 08:03:50] 08:03:55 Received message from Master: op=Filter serial=44765 08:03:55 Color wheel filter change from 0 to 0 08:03:55 FLIGetFilterPos err=0 currentPosition=0 08:03:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:55 Filter is already there-color wheel unchanged 08:03:55 Received message from Master: op=Shutter serial=44766 08:03:55 Shutter LASER close 08:03:55 Received message from Camera: op=State serial=44768 08:03:55 GetSingleValue result=40 Value=cccccccc 08:03:55 SkyScan query 08:03:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:03:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:56 Parameters OK 08:03:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:56 Set A/D data flow result=40 08:03:56 Set A/D channel type result=40 08:03:56 Set A/D encoding result=40 08:03:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:56 Set channel filter=0.000000e+000 result=40 08:03:56 Config A/D Result=40 08:03:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:56 Get A/D filter: -9.255963e+061 result=40 08:03:56 Get A/D value=-858993460 result=40 08:03:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:56 Parameters OK 08:03:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:56 Set A/D data flow result=40 08:03:56 Set A/D channel type result=40 08:03:56 Set A/D encoding result=40 08:03:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:56 Set channel filter=0.000000e+000 result=40 08:03:56 Config A/D Result=40 08:03:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:56 Get A/D filter: -9.255963e+061 result=40 08:03:56 Get A/D value=-858993460 result=40 08:03:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:56 Aux= 08:03:56 Message to Camera, serial 44768 queued 08:04:33 Received message from Master: op=PointingHead serial=44781 08:04:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:04:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:04:33 Point started: ret=0 08:04:33 point_skyscan result=0 08:04:34 Check angles 08:04:34 SkyScan query 08:04:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 08:04:34 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 08:04:34 Check angles 08:04:34 SkyScan query 08:04:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.965<-14931 Statuses=0008 0009 08:04:35 Msec=750 True Az=112.995 Ze=-43.965 Az status=0008 Ze status=0009 08:04:35 Check angles 08:04:35 SkyScan query 08:04:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.92<-16328 Statuses=0008 0009 08:04:36 Msec=1500 True Az=112.995 Ze=-64.92 Az status=0008 Ze status=0009 08:04:36 Check angles 08:04:36 SkyScan query 08:04:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 08:04:36 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 08:04:37 Check angles 08:04:37 SkyScan query 08:04:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 08:04:37 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 08:04:37 Check angles 08:04:37 SkyScan query 08:04:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.22<-20548 Statuses=0008 0009 08:04:38 Msec=3750 True Az=112.995 Ze=-128.22 Az status=0008 Ze status=0009 08:04:38 Check angles 08:04:38 SkyScan query 08:04:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.19<-21946 Statuses=0008 0009 08:04:39 Msec=4500 True Az=112.995 Ze=-149.19 Az status=0008 Ze status=0009 08:04:39 Check angles 08:04:39 SkyScan query 08:04:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.13<-23342 Statuses=0008 0009 08:04:39 Msec=5250 True Az=112.995 Ze=-170.13 Az status=0008 Ze status=0009 08:04:40 Check angles 08:04:40 SkyScan query 08:04:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:04:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:04:40 Message to Master queued w/err=0: serial=44781 error=0 08:04:45 Received message from Master: op=Filter serial=44782 08:04:45 Color wheel filter change from 0 to 0 08:04:45 FLIGetFilterPos err=0 currentPosition=0 08:04:45 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:45 Filter is already there-color wheel unchanged 08:04:45 Received message from Master: op=Shutter serial=44783 08:04:45 Shutter LASER open 08:04:46 Received message from Camera: op=State serial=44785 08:04:46 GetSingleValue result=40 Value=cccccccc 08:04:46 SkyScan query 08:04:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:04:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:46 Parameters OK 08:04:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:46 Set A/D data flow result=40 08:04:46 Set A/D channel type result=40 08:04:46 Set A/D encoding result=40 08:04:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:46 Set channel filter=0.000000e+000 result=40 08:04:46 Config A/D Result=40 08:04:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:46 Get A/D filter: -9.255963e+061 result=40 08:04:46 Get A/D value=-858993460 result=40 08:04:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:46 Parameters OK 08:04:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:46 Set A/D data flow result=40 08:04:46 Set A/D channel type result=40 08:04:46 Set A/D encoding result=40 08:04:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:46 Set channel filter=0.000000e+000 result=40 08:04:46 Config A/D Result=40 08:04:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:46 Get A/D filter: -9.255963e+061 result=40 08:04:46 Get A/D value=-858993460 result=40 08:04:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:46 Aux= 08:04:46 Message to Camera, serial 44785 queued 08:04:55 Received message from Master: op=Shutter serial=44795 08:04:55 Shutter LASER close 08:04:55 Received message from Master: op=PointingHead serial=44799 08:04:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:04:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:04:55 Point started: ret=0 08:04:55 point_skyscan result=0 08:04:56 Check angles 08:04:56 SkyScan query 08:04:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 08:04:57 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 08:04:57 Check angles 08:04:57 SkyScan query 08:04:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.295<-20153 Statuses=0008 0009 08:04:58 Msec=750 True Az=112.995 Ze=-122.295 Az status=0008 Ze status=0009 08:04:58 Check angles 08:04:58 SkyScan query 08:04:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 08:04:58 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 08:04:58 Check angles 08:04:58 SkyScan query 08:04:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 08:04:59 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 08:04:59 Check angles 08:04:59 SkyScan query 08:05:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 08:05:00 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 08:05:00 Check angles 08:05:00 SkyScan query 08:05:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.025<-14535 Statuses=0008 0009 08:05:01 Msec=3750 True Az=112.995 Ze=-38.025 Az status=0008 Ze status=0009 08:05:01 Check angles 08:05:01 SkyScan query 08:05:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 08:05:01 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 08:05:01 Check angles 08:05:01 SkyScan query 08:05:02 SkyScan query done: ret=0 az=112.995<-7533 ze=3.885<-11741 Statuses=0008 0009 08:05:02 Msec=5250 True Az=112.995 Ze=3.885 Az status=0008 Ze status=0009 08:05:02 Check angles 08:05:02 SkyScan query 08:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:05:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:05:03 Message to Master queued w/err=0: serial=44799 error=0 08:05:08 Received message from Master: op=Filter serial=44800 08:05:08 Color wheel filter change from 0 to 0 08:05:08 FLIGetFilterPos err=0 currentPosition=0 08:05:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:08 Filter is already there-color wheel unchanged 08:05:08 Received message from Master: op=Shutter serial=44801 08:05:08 Shutter LASER close 08:05:08 Received message from Camera: op=State serial=44803 08:05:08 GetSingleValue result=40 Value=cccccccc 08:05:08 SkyScan query 08:05:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:05:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:09 Parameters OK 08:05:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:09 Set A/D data flow result=40 08:05:09 Set A/D channel type result=40 08:05:09 Set A/D encoding result=40 08:05:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:09 Set channel filter=0.000000e+000 result=40 08:05:09 Config A/D Result=40 08:05:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:09 Get A/D filter: -9.255963e+061 result=40 08:05:09 Get A/D value=-858993460 result=40 08:05:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:09 Parameters OK 08:05:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:09 Set A/D data flow result=40 08:05:09 Set A/D channel type result=40 08:05:09 Set A/D encoding result=40 08:05:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:09 Set channel filter=0.000000e+000 result=40 08:05:09 Config A/D Result=40 08:05:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:09 Get A/D filter: -9.255963e+061 result=40 08:05:09 Get A/D value=-858993460 result=40 08:05:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:09 Aux= 08:05:09 Message to Camera, serial 44803 queued 08:05:46 Received message from Master: op=PointingHead serial=44816 08:05:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:05:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:05:46 Point started: ret=0 08:05:46 point_skyscan result=0 08:05:47 Check angles 08:05:47 SkyScan query 08:05:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:05:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:05:47 Message to Master queued w/err=0: serial=44816 error=0 08:05:52 Received message from Master: op=Filter serial=44817 08:05:52 Color wheel filter change from 0 to 0 08:05:52 FLIGetFilterPos err=0 currentPosition=0 08:05:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:52 Filter is already there-color wheel unchanged 08:05:52 Received message from Master: op=Shutter serial=44818 08:05:52 Shutter LASER close 08:05:52 Received message from Camera: op=State serial=44820 08:05:52 GetSingleValue result=40 Value=cccccccc 08:05:52 SkyScan query 08:05:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:05:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:53 Parameters OK 08:05:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:53 Set A/D data flow result=40 08:05:53 Set A/D channel type result=40 08:05:53 Set A/D encoding result=40 08:05:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:53 Set channel filter=0.000000e+000 result=40 08:05:53 Config A/D Result=40 08:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:53 Get A/D filter: -9.255963e+061 result=40 08:05:53 Get A/D value=-858993460 result=40 08:05:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:53 Parameters OK 08:05:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:53 Set A/D data flow result=40 08:05:53 Set A/D channel type result=40 08:05:53 Set A/D encoding result=40 08:05:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:53 Set channel filter=0.000000e+000 result=40 08:05:53 Config A/D Result=40 08:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:53 Get A/D filter: -9.255963e+061 result=40 08:05:53 Get A/D value=-858993460 result=40 08:05:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:53 Aux= 08:05:53 Message to Camera, serial 44820 queued 08:06:30 Received message from Master: op=PointingHead serial=44833 08:06:30 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:06:30 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:06:30 Point started: ret=0 08:06:30 point_skyscan result=0 08:06:31 Check angles 08:06:31 SkyScan query 08:06:32 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 08:06:32 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 08:06:32 Check angles 08:06:32 SkyScan query 08:06:32 SkyScan query done: ret=0 az=153.99<-10266 ze=-6.495<-12433 Statuses=0009 0008 08:06:32 Msec=750 True Az=153.99 Ze=-6.495 Az status=0009 Ze status=0008 08:06:33 Check angles 08:06:33 SkyScan query 08:06:33 SkyScan query done: ret=0 az=171.435<-11429 ze=-6.495<-12433 Statuses=0009 0008 08:06:33 Msec=1500 True Az=171.435 Ze=-6.495 Az status=0009 Ze status=0008 08:06:33 Check angles 08:06:33 SkyScan query 08:06:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:06:34 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:06:34 Message to Master queued w/err=0: serial=44833 error=0 08:06:39 Received message from Master: op=Filter serial=44834 08:06:39 Color wheel filter change from 0 to 0 08:06:39 FLIGetFilterPos err=0 currentPosition=0 08:06:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:39 Filter is already there-color wheel unchanged 08:06:39 Received message from Master: op=Shutter serial=44835 08:06:39 Shutter LASER close 08:06:39 Received message from Camera: op=State serial=44837 08:06:39 GetSingleValue result=40 Value=cccccccc 08:06:39 SkyScan query 08:06:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:06:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:40 Parameters OK 08:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:40 Set A/D data flow result=40 08:06:40 Set A/D channel type result=40 08:06:40 Set A/D encoding result=40 08:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:40 Set channel filter=0.000000e+000 result=40 08:06:40 Config A/D Result=40 08:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:40 Get A/D filter: -9.255963e+061 result=40 08:06:40 Get A/D value=-858993460 result=40 08:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:40 Parameters OK 08:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:40 Set A/D data flow result=40 08:06:40 Set A/D channel type result=40 08:06:40 Set A/D encoding result=40 08:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:40 Set channel filter=0.000000e+000 result=40 08:06:40 Config A/D Result=40 08:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:40 Get A/D filter: -9.255963e+061 result=40 08:06:40 Get A/D value=-858993460 result=40 08:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:40 Aux= 08:06:40 Message to Camera, serial 44837 queued 08:07:17 Received message from Master: op=PointingHead serial=44850 08:07:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:07:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:07:17 Point started: ret=0 08:07:17 point_skyscan result=0 08:07:18 Check angles 08:07:18 SkyScan query 08:07:18 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 08:07:18 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 08:07:18 Check angles 08:07:18 SkyScan query 08:07:19 SkyScan query done: ret=0 az=135.51<-9034 ze=6.495<-11567 Statuses=0009 0008 08:07:19 Msec=750 True Az=135.51 Ze=6.495 Az status=0009 Ze status=0008 08:07:19 Check angles 08:07:19 SkyScan query 08:07:20 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 08:07:20 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 08:07:20 Check angles 08:07:20 SkyScan query 08:07:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:07:20 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:07:20 Message to Master queued w/err=0: serial=44850 error=0 08:07:25 Received message from Master: op=Filter serial=44851 08:07:25 Color wheel filter change from 0 to 0 08:07:25 FLIGetFilterPos err=0 currentPosition=0 08:07:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:25 Filter is already there-color wheel unchanged 08:07:26 Received message from Master: op=Shutter serial=44852 08:07:26 Shutter LASER close 08:07:26 Received message from Camera: op=State serial=44854 08:07:26 GetSingleValue result=40 Value=cccccccc 08:07:26 SkyScan query 08:07:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:07:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:26 Parameters OK 08:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:26 Set A/D data flow result=40 08:07:26 Set A/D channel type result=40 08:07:26 Set A/D encoding result=40 08:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:26 Set channel filter=0.000000e+000 result=40 08:07:26 Config A/D Result=40 08:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:26 Get A/D filter: -9.255963e+061 result=40 08:07:26 Get A/D value=-858993460 result=40 08:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:26 Parameters OK 08:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:26 Set A/D data flow result=40 08:07:26 Set A/D channel type result=40 08:07:26 Set A/D encoding result=40 08:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:26 Set channel filter=0.000000e+000 result=40 08:07:26 Config A/D Result=40 08:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:26 Get A/D filter: -9.255963e+061 result=40 08:07:26 Get A/D value=-858993460 result=40 08:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:26 Aux= 08:07:26 Message to Camera, serial 44854 queued 08:08:03 Received message from Master: op=PointingHead serial=44867 08:08:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:08:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:08:03 Point started: ret=0 08:08:03 point_skyscan result=0 08:08:04 Check angles 08:08:04 SkyScan query 08:08:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 08:08:05 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 08:08:05 Check angles 08:08:05 SkyScan query 08:08:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 08:08:05 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 08:08:06 Check angles 08:08:06 SkyScan query 08:08:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.25<-16350 Statuses=0008 0009 08:08:06 Msec=1500 True Az=112.995 Ze=-65.25 Az status=0008 Ze status=0009 08:08:06 Check angles 08:08:06 SkyScan query 08:08:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 08:08:07 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 08:08:07 Check angles 08:08:07 SkyScan query 08:08:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.16<-19144 Statuses=0008 0009 08:08:08 Msec=3000 True Az=112.995 Ze=-107.16 Az status=0008 Ze status=0009 08:08:08 Check angles 08:08:08 SkyScan query 08:08:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.115<-20541 Statuses=0008 0009 08:08:08 Msec=3750 True Az=112.995 Ze=-128.115 Az status=0008 Ze status=0009 08:08:09 Check angles 08:08:09 SkyScan query 08:08:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.07<-21938 Statuses=0008 0009 08:08:09 Msec=4500 True Az=112.995 Ze=-149.07 Az status=0008 Ze status=0009 08:08:09 Check angles 08:08:09 SkyScan query 08:08:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.025<-23335 Statuses=0008 0009 08:08:10 Msec=5250 True Az=112.995 Ze=-170.025 Az status=0008 Ze status=0009 08:08:10 Check angles 08:08:10 SkyScan query 08:08:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:08:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:08:11 Message to Master queued w/err=0: serial=44867 error=0 08:08:16 Received message from Master: op=Filter serial=44868 08:08:16 Color wheel filter change from 0 to 0 08:08:16 FLIGetFilterPos err=0 currentPosition=0 08:08:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:16 Filter is already there-color wheel unchanged 08:08:16 Received message from Master: op=Shutter serial=44869 08:08:16 Shutter LASER open 08:08:16 Received message from Camera: op=State serial=44871 08:08:16 GetSingleValue result=40 Value=cccccccc 08:08:16 SkyScan query 08:08:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:08:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:17 Parameters OK 08:08:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:17 Set A/D data flow result=40 08:08:17 Set A/D channel type result=40 08:08:17 Set A/D encoding result=40 08:08:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:17 Set channel filter=0.000000e+000 result=40 08:08:17 Config A/D Result=40 08:08:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:17 Get A/D filter: -9.255963e+061 result=40 08:08:17 Get A/D value=-858993460 result=40 08:08:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:17 Parameters OK 08:08:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:17 Set A/D data flow result=40 08:08:17 Set A/D channel type result=40 08:08:17 Set A/D encoding result=40 08:08:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:17 Set channel filter=0.000000e+000 result=40 08:08:17 Config A/D Result=40 08:08:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:17 Get A/D filter: -9.255963e+061 result=40 08:08:17 Get A/D value=-858993460 result=40 08:08:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:17 Aux= 08:08:17 Message to Camera, serial 44871 queued 08:08:25 Received message from Master: op=Shutter serial=44881 08:08:25 Shutter LASER close 08:08:26 Received message from Master: op=PointingHead serial=44885 08:08:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:08:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:08:26 Point started: ret=0 08:08:26 point_skyscan result=0 08:08:27 Check angles 08:08:27 SkyScan query 08:08:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.71<-21514 Statuses=0008 0009 08:08:27 Msec=0 True Az=112.995 Ze=-142.71 Az status=0008 Ze status=0009 08:08:27 Check angles 08:08:27 SkyScan query 08:08:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.35<-20090 Statuses=0008 0009 08:08:28 Msec=750 True Az=112.995 Ze=-121.35 Az status=0008 Ze status=0009 08:08:28 Check angles 08:08:28 SkyScan query 08:08:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.395<-18693 Statuses=0008 0009 08:08:29 Msec=1500 True Az=112.995 Ze=-100.395 Az status=0008 Ze status=0009 08:08:29 Check angles 08:08:29 SkyScan query 08:08:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-78.945<-17263 Statuses=0008 0009 08:08:29 Msec=2250 True Az=112.995 Ze=-78.945 Az status=0008 Ze status=0009 08:08:30 Check angles 08:08:30 SkyScan query 08:08:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.555<-15837 Statuses=0008 0009 08:08:30 Msec=3000 True Az=112.995 Ze=-57.555 Az status=0008 Ze status=0009 08:08:30 Check angles 08:08:30 SkyScan query 08:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.165<-14411 Statuses=0008 0009 08:08:31 Msec=3750 True Az=112.995 Ze=-36.165 Az status=0008 Ze status=0009 08:08:31 Check angles 08:08:31 SkyScan query 08:08:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.24<-13016 Statuses=0008 0009 08:08:32 Msec=4500 True Az=112.995 Ze=-15.24 Az status=0008 Ze status=0009 08:08:32 Check angles 08:08:32 SkyScan query 08:08:33 SkyScan query done: ret=0 az=112.995<-7533 ze=5.295<-11647 Statuses=0008 0009 08:08:33 Msec=5250 True Az=112.995 Ze=5.295 Az status=0008 Ze status=0009 08:08:33 Check angles 08:08:33 SkyScan query 08:08:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:08:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:08:33 Message to Master queued w/err=0: serial=44885 error=0 08:08:38 Received message from Master: op=Filter serial=44886 08:08:38 Color wheel filter change from 0 to 0 08:08:38 FLIGetFilterPos err=0 currentPosition=0 08:08:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:38 Filter is already there-color wheel unchanged 08:08:38 Received message from Master: op=Shutter serial=44887 08:08:38 Shutter LASER close 08:08:39 Received message from Camera: op=State serial=44889 08:08:39 GetSingleValue result=40 Value=cccccccc 08:08:39 SkyScan query 08:08:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:08:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:39 Parameters OK 08:08:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:39 Set A/D data flow result=40 08:08:39 Set A/D channel type result=40 08:08:39 Set A/D encoding result=40 08:08:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:39 Set channel filter=0.000000e+000 result=40 08:08:39 Config A/D Result=40 08:08:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:39 Get A/D filter: -9.255963e+061 result=40 08:08:39 Get A/D value=-858993460 result=40 08:08:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:39 Parameters OK 08:08:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:39 Set A/D data flow result=40 08:08:39 Set A/D channel type result=40 08:08:39 Set A/D encoding result=40 08:08:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:39 Set channel filter=0.000000e+000 result=40 08:08:39 Config A/D Result=40 08:08:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:39 Get A/D filter: -9.255963e+061 result=40 08:08:39 Get A/D value=-858993460 result=40 08:08:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:39 Aux= 08:08:39 Message to Camera, serial 44889 queued 08:09:16 Received message from Master: op=PointingHead serial=44902 08:09:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:09:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:09:16 Point started: ret=0 08:09:16 point_skyscan result=0 08:09:17 Check angles 08:09:17 SkyScan query 08:09:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:09:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:09:18 Message to Master queued w/err=0: serial=44902 error=0 08:09:23 Received message from Master: op=Filter serial=44903 08:09:23 Color wheel filter change from 0 to 0 08:09:23 FLIGetFilterPos err=0 currentPosition=0 08:09:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:23 Filter is already there-color wheel unchanged 08:09:23 Received message from Master: op=Shutter serial=44904 08:09:23 Shutter LASER close 08:09:23 Received message from Camera: op=State serial=44906 08:09:23 GetSingleValue result=40 Value=cccccccc 08:09:23 SkyScan query 08:09:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:09:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:23 Parameters OK 08:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:23 Set A/D data flow result=40 08:09:23 Set A/D channel type result=40 08:09:23 Set A/D encoding result=40 08:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:23 Set channel filter=0.000000e+000 result=40 08:09:23 Config A/D Result=40 08:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:23 Get A/D filter: -9.255963e+061 result=40 08:09:23 Get A/D value=-858993460 result=40 08:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:23 Parameters OK 08:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:23 Set A/D data flow result=40 08:09:23 Set A/D channel type result=40 08:09:23 Set A/D encoding result=40 08:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:23 Set channel filter=0.000000e+000 result=40 08:09:23 Config A/D Result=40 08:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:23 Get A/D filter: -9.255963e+061 result=40 08:09:23 Get A/D value=-858993460 result=40 08:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:23 Aux= 08:09:23 Message to Camera, serial 44906 queued 08:10:00 Received message from Master: op=PointingHead serial=44919 08:10:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:10:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:10:01 Point started: ret=0 08:10:01 point_skyscan result=0 08:10:01 Check angles 08:10:01 SkyScan query 08:10:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:10:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:10:02 Message to Master queued w/err=0: serial=44919 error=0 08:10:07 Received message from Master: op=Filter serial=44920 08:10:07 Color wheel filter change from 0 to 0 08:10:07 FLIGetFilterPos err=0 currentPosition=0 08:10:07 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:07 Filter is already there-color wheel unchanged 08:10:07 Received message from Master: op=Shutter serial=44921 08:10:07 Shutter LASER close 08:10:07 Received message from Camera: op=State serial=44923 08:10:07 GetSingleValue result=40 Value=cccccccc 08:10:07 SkyScan query 08:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:10:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:08 Parameters OK 08:10:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:08 Set A/D data flow result=40 08:10:08 Set A/D channel type result=40 08:10:08 Set A/D encoding result=40 08:10:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:08 Set channel filter=0.000000e+000 result=40 08:10:08 Config A/D Result=40 08:10:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:08 Get A/D filter: -9.255963e+061 result=40 08:10:08 Get A/D value=-858993460 result=40 08:10:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:08 Parameters OK 08:10:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:08 Set A/D data flow result=40 08:10:08 Set A/D channel type result=40 08:10:08 Set A/D encoding result=40 08:10:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:08 Set channel filter=0.000000e+000 result=40 08:10:08 Config A/D Result=40 08:10:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:08 Get A/D filter: -9.255963e+061 result=40 08:10:08 Get A/D value=-858993460 result=40 08:10:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:08 Aux= 08:10:08 Message to Camera, serial 44923 queued 08:10:45 Received message from Master: op=PointingHead serial=44936 08:10:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:10:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:10:45 Point started: ret=0 08:10:45 point_skyscan result=0 08:10:46 Check angles 08:10:46 SkyScan query 08:10:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:10:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:10:46 Message to Master queued w/err=0: serial=44936 error=0 08:10:51 Received message from Master: op=Filter serial=44937 08:10:51 Color wheel filter change from 0 to 0 08:10:51 FLIGetFilterPos err=0 currentPosition=0 08:10:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:51 Filter is already there-color wheel unchanged 08:10:51 Received message from Master: op=Shutter serial=44938 08:10:51 Shutter LASER close 08:10:52 Received message from Camera: op=State serial=44940 08:10:52 GetSingleValue result=40 Value=cccccccc 08:10:52 SkyScan query 08:10:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:10:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:52 Parameters OK 08:10:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:52 Set A/D data flow result=40 08:10:52 Set A/D channel type result=40 08:10:52 Set A/D encoding result=40 08:10:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:52 Set channel filter=0.000000e+000 result=40 08:10:52 Config A/D Result=40 08:10:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:52 Get A/D filter: -9.255963e+061 result=40 08:10:52 Get A/D value=-858993460 result=40 08:10:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:52 Parameters OK 08:10:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:52 Set A/D data flow result=40 08:10:52 Set A/D channel type result=40 08:10:52 Set A/D encoding result=40 08:10:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:52 Set channel filter=0.000000e+000 result=40 08:10:52 Config A/D Result=40 08:10:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:52 Get A/D filter: -9.255963e+061 result=40 08:10:52 Get A/D value=-858993460 result=40 08:10:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:52 Aux= 08:10:52 Message to Camera, serial 44940 queued 08:11:29 Received message from Master: op=PointingHead serial=44953 08:11:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:11:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:11:29 Point started: ret=0 08:11:29 point_skyscan result=0 08:11:30 Check angles 08:11:30 SkyScan query 08:11:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 08:11:31 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 08:11:31 Check angles 08:11:31 SkyScan query 08:11:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 08:11:31 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 08:11:32 Check angles 08:11:32 SkyScan query 08:11:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 08:11:32 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 08:11:32 Check angles 08:11:32 SkyScan query 08:11:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.385<-17759 Statuses=0008 0009 08:11:33 Msec=2250 True Az=112.995 Ze=-86.385 Az status=0008 Ze status=0009 08:11:33 Check angles 08:11:33 SkyScan query 08:11:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.355<-19157 Statuses=0008 0009 08:11:34 Msec=3000 True Az=112.995 Ze=-107.355 Az status=0008 Ze status=0009 08:11:34 Check angles 08:11:34 SkyScan query 08:11:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.295<-20553 Statuses=0008 0009 08:11:34 Msec=3750 True Az=112.995 Ze=-128.295 Az status=0008 Ze status=0009 08:11:35 Check angles 08:11:35 SkyScan query 08:11:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 08:11:35 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 08:11:35 Check angles 08:11:35 SkyScan query 08:11:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 08:11:36 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 08:11:36 Check angles 08:11:36 SkyScan query 08:11:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:11:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:11:37 Message to Master queued w/err=0: serial=44953 error=0 08:11:42 Received message from Master: op=Filter serial=44954 08:11:42 Color wheel filter change from 0 to 0 08:11:42 FLIGetFilterPos err=0 currentPosition=0 08:11:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:42 Filter is already there-color wheel unchanged 08:11:42 Received message from Master: op=Shutter serial=44955 08:11:42 Shutter LASER open 08:11:42 Received message from Camera: op=State serial=44957 08:11:42 GetSingleValue result=40 Value=cccccccc 08:11:42 SkyScan query 08:11:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:11:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:43 Parameters OK 08:11:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:43 Set A/D data flow result=40 08:11:43 Set A/D channel type result=40 08:11:43 Set A/D encoding result=40 08:11:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:43 Set channel filter=0.000000e+000 result=40 08:11:43 Config A/D Result=40 08:11:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:43 Get A/D filter: -9.255963e+061 result=40 08:11:43 Get A/D value=-858993460 result=40 08:11:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:43 Parameters OK 08:11:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:43 Set A/D data flow result=40 08:11:43 Set A/D channel type result=40 08:11:43 Set A/D encoding result=40 08:11:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:43 Set channel filter=0.000000e+000 result=40 08:11:43 Config A/D Result=40 08:11:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:43 Get A/D filter: -9.255963e+061 result=40 08:11:43 Get A/D value=-858993460 result=40 08:11:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:43 Aux= 08:11:43 Message to Camera, serial 44957 queued 08:11:51 Received message from Master: op=Shutter serial=44967 08:11:51 Shutter LASER close 08:11:52 Received message from Master: op=PointingHead serial=44971 08:11:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:11:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:11:52 Point started: ret=0 08:11:52 point_skyscan result=0 08:11:53 Check angles 08:11:53 SkyScan query 08:11:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 08:11:53 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 08:11:53 Check angles 08:11:53 SkyScan query 08:11:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 08:11:54 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 08:11:54 Check angles 08:11:54 SkyScan query 08:11:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 08:11:55 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 08:11:55 Check angles 08:11:55 SkyScan query 08:11:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 08:11:56 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 08:11:56 Check angles 08:11:56 SkyScan query 08:11:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 08:11:56 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 08:11:56 Check angles 08:11:56 SkyScan query 08:11:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 08:11:57 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 08:11:57 Check angles 08:11:57 SkyScan query 08:11:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 08:11:58 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 08:11:58 Check angles 08:11:58 SkyScan query 08:11:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 08:11:59 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 08:11:59 Check angles 08:11:59 SkyScan query 08:11:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:11:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:11:59 Message to Master queued w/err=0: serial=44971 error=0 08:12:04 Received message from Master: op=Filter serial=44972 08:12:04 Color wheel filter change from 0 to 0 08:12:04 FLIGetFilterPos err=0 currentPosition=0 08:12:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:04 Filter is already there-color wheel unchanged 08:12:04 Received message from Master: op=Shutter serial=44973 08:12:04 Shutter LASER close 08:12:05 Received message from Camera: op=State serial=44975 08:12:05 GetSingleValue result=40 Value=cccccccc 08:12:05 SkyScan query 08:12:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:12:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:05 Parameters OK 08:12:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:05 Set A/D data flow result=40 08:12:05 Set A/D channel type result=40 08:12:05 Set A/D encoding result=40 08:12:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:05 Set channel filter=0.000000e+000 result=40 08:12:05 Config A/D Result=40 08:12:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:05 Get A/D filter: -9.255963e+061 result=40 08:12:05 Get A/D value=-858993460 result=40 08:12:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:05 Parameters OK 08:12:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:05 Set A/D data flow result=40 08:12:05 Set A/D channel type result=40 08:12:05 Set A/D encoding result=40 08:12:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:05 Set channel filter=0.000000e+000 result=40 08:12:05 Config A/D Result=40 08:12:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:05 Get A/D filter: -9.255963e+061 result=40 08:12:05 Get A/D value=-858993460 result=40 08:12:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:05 Aux= 08:12:05 Message to Camera, serial 44975 queued 08:12:42 Received message from Master: op=PointingHead serial=44988 08:12:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:12:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:12:42 Point started: ret=0 08:12:42 point_skyscan result=0 08:12:43 Check angles 08:12:43 SkyScan query 08:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:12:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:12:44 Message to Master queued w/err=0: serial=44988 error=0 08:12:49 Received message from Master: op=Filter serial=44989 08:12:49 Color wheel filter change from 0 to 0 08:12:49 FLIGetFilterPos err=0 currentPosition=0 08:12:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:49 Filter is already there-color wheel unchanged 08:12:49 Received message from Master: op=Shutter serial=44990 08:12:49 Shutter LASER close 08:12:49 Received message from Camera: op=State serial=44992 08:12:49 GetSingleValue result=40 Value=cccccccc 08:12:49 SkyScan query 08:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:12:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:50 Parameters OK 08:12:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:50 Set A/D data flow result=40 08:12:50 Set A/D channel type result=40 08:12:50 Set A/D encoding result=40 08:12:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:50 Set channel filter=0.000000e+000 result=40 08:12:50 Config A/D Result=40 08:12:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:50 Get A/D filter: -9.255963e+061 result=40 08:12:50 Get A/D value=-858993460 result=40 08:12:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:50 Parameters OK 08:12:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:50 Set A/D data flow result=40 08:12:50 Set A/D channel type result=40 08:12:50 Set A/D encoding result=40 08:12:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:50 Set channel filter=0.000000e+000 result=40 08:12:50 Config A/D Result=40 08:12:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:50 Get A/D filter: -9.255963e+061 result=40 08:12:50 Get A/D value=-858993460 result=40 08:12:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:50 Aux= 08:12:50 Message to Camera, serial 44992 queued 08:13:26 Received message from Master: op=PointingHead serial=45005 08:13:26 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:13:26 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:13:27 Point started: ret=0 08:13:27 point_skyscan result=0 08:13:27 Check angles 08:13:27 SkyScan query 08:13:28 SkyScan query done: ret=0 az=135.72<-9048 ze=-6.51<-12434 Statuses=0009 0008 08:13:28 Msec=0 True Az=135.72 Ze=-6.51 Az status=0009 Ze status=0008 08:13:28 Check angles 08:13:28 SkyScan query 08:13:29 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.495<-12433 Statuses=0009 0008 08:13:29 Msec=750 True Az=153.6 Ze=-6.495 Az status=0009 Ze status=0008 08:13:29 Check angles 08:13:29 SkyScan query 08:13:30 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 08:13:30 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 08:13:30 Check angles 08:13:30 SkyScan query 08:13:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:13:30 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:13:30 Message to Master queued w/err=0: serial=45005 error=0 08:13:35 Received message from Master: op=Filter serial=45006 08:13:35 Color wheel filter change from 0 to 0 08:13:35 FLIGetFilterPos err=0 currentPosition=0 08:13:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:35 Filter is already there-color wheel unchanged 08:13:35 Received message from Master: op=Shutter serial=45007 08:13:35 Shutter LASER close 08:13:35 Received message from Camera: op=State serial=45009 08:13:35 GetSingleValue result=40 Value=cccccccc 08:13:35 SkyScan query 08:13:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:13:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:36 Parameters OK 08:13:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:36 Set A/D data flow result=40 08:13:36 Set A/D channel type result=40 08:13:36 Set A/D encoding result=40 08:13:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:36 Set channel filter=0.000000e+000 result=40 08:13:36 Config A/D Result=40 08:13:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:36 Get A/D filter: -9.255963e+061 result=40 08:13:36 Get A/D value=-858993460 result=40 08:13:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:36 Parameters OK 08:13:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:36 Set A/D data flow result=40 08:13:36 Set A/D channel type result=40 08:13:36 Set A/D encoding result=40 08:13:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:36 Set channel filter=0.000000e+000 result=40 08:13:36 Config A/D Result=40 08:13:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:36 Get A/D filter: -9.255963e+061 result=40 08:13:36 Get A/D value=-858993460 result=40 08:13:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:36 Aux= 08:13:36 Message to Camera, serial 45009 queued 08:14:13 Received message from Master: op=PointingHead serial=45022 08:14:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:14:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:14:13 Point started: ret=0 08:14:13 point_skyscan result=0 08:14:14 Check angles 08:14:14 SkyScan query 08:14:15 SkyScan query done: ret=0 az=153.03<-10202 ze=6.51<-11566 Statuses=0009 0008 08:14:15 Msec=0 True Az=153.03 Ze=6.51 Az status=0009 Ze status=0008 08:14:15 Check angles [UTC 2019-3-1 08:14:15] 08:14:15 SkyScan query 08:14:15 SkyScan query done: ret=0 az=133.77<-8918 ze=6.495<-11567 Statuses=0009 0008 08:14:15 Msec=750 True Az=133.77 Ze=6.495 Az status=0009 Ze status=0008 08:14:16 Check angles 08:14:16 SkyScan query 08:14:16 SkyScan query done: ret=0 az=117.285<-7819 ze=6.495<-11567 Statuses=0009 0008 08:14:16 Msec=1500 True Az=117.285 Ze=6.495 Az status=0009 Ze status=0008 08:14:16 Check angles 08:14:16 SkyScan query 08:14:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:14:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:14:17 Message to Master queued w/err=0: serial=45022 error=0 08:14:22 Received message from Master: op=Filter serial=45023 08:14:22 Color wheel filter change from 0 to 0 08:14:22 FLIGetFilterPos err=0 currentPosition=0 08:14:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:22 Filter is already there-color wheel unchanged 08:14:22 Received message from Master: op=Shutter serial=45024 08:14:22 Shutter LASER close 08:14:22 Received message from Camera: op=State serial=45026 08:14:22 GetSingleValue result=40 Value=cccccccc 08:14:22 SkyScan query 08:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:14:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:23 Parameters OK 08:14:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:23 Set A/D data flow result=40 08:14:23 Set A/D channel type result=40 08:14:23 Set A/D encoding result=40 08:14:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:23 Set channel filter=0.000000e+000 result=40 08:14:23 Config A/D Result=40 08:14:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:23 Get A/D filter: -9.255963e+061 result=40 08:14:23 Get A/D value=-858993460 result=40 08:14:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:23 Parameters OK 08:14:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:23 Set A/D data flow result=40 08:14:23 Set A/D channel type result=40 08:14:23 Set A/D encoding result=40 08:14:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:23 Set channel filter=0.000000e+000 result=40 08:14:23 Config A/D Result=40 08:14:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:23 Get A/D filter: -9.255963e+061 result=40 08:14:23 Get A/D value=-858993460 result=40 08:14:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:23 Aux= 08:14:23 Message to Camera, serial 45026 queued 08:14:59 Received message from Master: op=PointingHead serial=45039 08:14:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:14:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:15:00 Point started: ret=0 08:15:00 point_skyscan result=0 08:15:01 Check angles 08:15:01 SkyScan query 08:15:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 08:15:01 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 08:15:01 Check angles 08:15:01 SkyScan query 08:15:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 08:15:02 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 08:15:02 Check angles 08:15:02 SkyScan query 08:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.295<-16353 Statuses=0008 0009 08:15:03 Msec=1500 True Az=112.995 Ze=-65.295 Az status=0008 Ze status=0009 08:15:03 Check angles 08:15:03 SkyScan query 08:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 08:15:03 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 08:15:04 Check angles 08:15:04 SkyScan query 08:15:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 08:15:04 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 08:15:04 Check angles 08:15:04 SkyScan query 08:15:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 08:15:05 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 08:15:05 Check angles 08:15:05 SkyScan query 08:15:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.535<-21969 Statuses=0008 0009 08:15:06 Msec=4500 True Az=112.995 Ze=-149.535 Az status=0008 Ze status=0009 08:15:06 Check angles 08:15:06 SkyScan query 08:15:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.475<-23365 Statuses=0008 0009 08:15:06 Msec=5250 True Az=112.995 Ze=-170.475 Az status=0008 Ze status=0009 08:15:07 Check angles 08:15:07 SkyScan query 08:15:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:15:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:15:07 Message to Master queued w/err=0: serial=45039 error=0 08:15:12 Received message from Master: op=Filter serial=45040 08:15:12 Color wheel filter change from 0 to 0 08:15:12 FLIGetFilterPos err=0 currentPosition=0 08:15:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:12 Filter is already there-color wheel unchanged 08:15:12 Received message from Master: op=Shutter serial=45041 08:15:12 Shutter LASER open 08:15:13 Received message from Camera: op=State serial=45043 08:15:13 GetSingleValue result=40 Value=cccccccc 08:15:13 SkyScan query 08:15:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:15:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:13 Parameters OK 08:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:13 Set A/D data flow result=40 08:15:13 Set A/D channel type result=40 08:15:13 Set A/D encoding result=40 08:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:13 Set channel filter=0.000000e+000 result=40 08:15:13 Config A/D Result=40 08:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:13 Get A/D filter: -9.255963e+061 result=40 08:15:13 Get A/D value=-858993460 result=40 08:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:13 Parameters OK 08:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:13 Set A/D data flow result=40 08:15:13 Set A/D channel type result=40 08:15:13 Set A/D encoding result=40 08:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:13 Set channel filter=0.000000e+000 result=40 08:15:13 Config A/D Result=40 08:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:13 Get A/D filter: -9.255963e+061 result=40 08:15:13 Get A/D value=-858993460 result=40 08:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:13 Aux= 08:15:13 Message to Camera, serial 45043 queued 08:15:22 Received message from Master: op=Shutter serial=45053 08:15:22 Shutter LASER close 08:15:22 Received message from Master: op=PointingHead serial=45057 08:15:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:15:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:15:22 Point started: ret=0 08:15:22 point_skyscan result=0 08:15:23 Check angles 08:15:23 SkyScan query 08:15:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 08:15:24 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 08:15:24 Check angles 08:15:24 SkyScan query 08:15:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 08:15:24 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 08:15:25 Check angles 08:15:25 SkyScan query 08:15:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.83<-18722 Statuses=0008 0009 08:15:25 Msec=1500 True Az=112.995 Ze=-100.83 Az status=0008 Ze status=0009 08:15:25 Check angles 08:15:25 SkyScan query 08:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.89<-17326 Statuses=0008 0009 08:15:26 Msec=2250 True Az=112.995 Ze=-79.89 Az status=0008 Ze status=0009 08:15:26 Check angles 08:15:26 SkyScan query 08:15:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.47<-15898 Statuses=0008 0009 08:15:27 Msec=3000 True Az=112.995 Ze=-58.47 Az status=0008 Ze status=0009 08:15:27 Check angles 08:15:27 SkyScan query 08:15:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.53<-14502 Statuses=0008 0009 08:15:27 Msec=3750 True Az=112.995 Ze=-37.53 Az status=0008 Ze status=0009 08:15:28 Check angles 08:15:28 SkyScan query 08:15:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 08:15:28 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 08:15:28 Check angles 08:15:28 SkyScan query 08:15:29 SkyScan query done: ret=0 az=112.995<-7533 ze=4.32<-11712 Statuses=0008 0009 08:15:29 Msec=5250 True Az=112.995 Ze=4.32 Az status=0008 Ze status=0009 08:15:29 Check angles 08:15:29 SkyScan query 08:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:15:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:15:30 Message to Master queued w/err=0: serial=45057 error=0 08:15:35 Received message from Master: op=Filter serial=45058 08:15:35 Color wheel filter change from 0 to 0 08:15:35 FLIGetFilterPos err=0 currentPosition=0 08:15:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:35 Filter is already there-color wheel unchanged 08:15:35 Received message from Master: op=Shutter serial=45059 08:15:35 Shutter LASER close 08:15:35 Received message from Camera: op=State serial=45061 08:15:35 GetSingleValue result=40 Value=cccccccc 08:15:35 SkyScan query 08:15:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:15:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:36 Parameters OK 08:15:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:36 Set A/D data flow result=40 08:15:36 Set A/D channel type result=40 08:15:36 Set A/D encoding result=40 08:15:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:36 Set channel filter=0.000000e+000 result=40 08:15:36 Config A/D Result=40 08:15:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:36 Get A/D filter: -9.255963e+061 result=40 08:15:36 Get A/D value=-858993460 result=40 08:15:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:36 Parameters OK 08:15:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:36 Set A/D data flow result=40 08:15:36 Set A/D channel type result=40 08:15:36 Set A/D encoding result=40 08:15:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:36 Set channel filter=0.000000e+000 result=40 08:15:36 Config A/D Result=40 08:15:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:36 Get A/D filter: -9.255963e+061 result=40 08:15:36 Get A/D value=-858993460 result=40 08:15:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:36 Aux= 08:15:36 Message to Camera, serial 45061 queued 08:16:13 Received message from Master: op=PointingHead serial=45074 08:16:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:16:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:16:13 Point started: ret=0 08:16:13 point_skyscan result=0 08:16:14 Check angles 08:16:14 SkyScan query 08:16:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:16:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:16:14 Message to Master queued w/err=0: serial=45074 error=0 08:16:19 Received message from Master: op=Filter serial=45075 08:16:19 Color wheel filter change from 0 to 0 08:16:19 FLIGetFilterPos err=0 currentPosition=0 08:16:19 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:19 Filter is already there-color wheel unchanged 08:16:19 Received message from Master: op=Shutter serial=45076 08:16:19 Shutter LASER close 08:16:19 Received message from Camera: op=State serial=45078 08:16:19 GetSingleValue result=40 Value=cccccccc 08:16:19 SkyScan query 08:16:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:16:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:20 Parameters OK 08:16:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:20 Set A/D data flow result=40 08:16:20 Set A/D channel type result=40 08:16:20 Set A/D encoding result=40 08:16:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:20 Set channel filter=0.000000e+000 result=40 08:16:20 Config A/D Result=40 08:16:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:20 Get A/D filter: -9.255963e+061 result=40 08:16:20 Get A/D value=-858993460 result=40 08:16:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:20 Parameters OK 08:16:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:20 Set A/D data flow result=40 08:16:20 Set A/D channel type result=40 08:16:20 Set A/D encoding result=40 08:16:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:20 Set channel filter=0.000000e+000 result=40 08:16:20 Config A/D Result=40 08:16:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:20 Get A/D filter: -9.255963e+061 result=40 08:16:20 Get A/D value=-858993460 result=40 08:16:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:20 Aux= 08:16:20 Message to Camera, serial 45078 queued 08:16:57 Received message from Master: op=PointingHead serial=45091 08:16:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:16:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:16:57 Point started: ret=0 08:16:57 point_skyscan result=0 08:16:58 Check angles 08:16:58 SkyScan query 08:16:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:16:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:16:58 Message to Master queued w/err=0: serial=45091 error=0 08:17:03 Received message from Master: op=Filter serial=45092 08:17:03 Color wheel filter change from 0 to 0 08:17:03 FLIGetFilterPos err=0 currentPosition=0 08:17:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:03 Filter is already there-color wheel unchanged 08:17:04 Received message from Master: op=Shutter serial=45093 08:17:04 Shutter LASER close 08:17:04 Received message from Camera: op=State serial=45095 08:17:04 GetSingleValue result=40 Value=cccccccc 08:17:04 SkyScan query 08:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:17:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:04 Parameters OK 08:17:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:04 Set A/D data flow result=40 08:17:04 Set A/D channel type result=40 08:17:04 Set A/D encoding result=40 08:17:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:04 Set channel filter=0.000000e+000 result=40 08:17:04 Config A/D Result=40 08:17:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:04 Get A/D filter: -9.255963e+061 result=40 08:17:04 Get A/D value=-858993460 result=40 08:17:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:04 Parameters OK 08:17:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:04 Set A/D data flow result=40 08:17:04 Set A/D channel type result=40 08:17:04 Set A/D encoding result=40 08:17:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:04 Set channel filter=0.000000e+000 result=40 08:17:04 Config A/D Result=40 08:17:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:04 Get A/D filter: -9.255963e+061 result=40 08:17:04 Get A/D value=-858993460 result=40 08:17:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:04 Aux= 08:17:04 Message to Camera, serial 45095 queued 08:17:41 Received message from Master: op=PointingHead serial=45108 08:17:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:17:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:17:41 Point started: ret=0 08:17:41 point_skyscan result=0 08:17:42 Check angles 08:17:42 SkyScan query 08:17:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:17:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:17:43 Message to Master queued w/err=0: serial=45108 error=0 08:17:48 Received message from Master: op=Filter serial=45109 08:17:48 Color wheel filter change from 0 to 0 08:17:48 FLIGetFilterPos err=0 currentPosition=0 08:17:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:48 Filter is already there-color wheel unchanged 08:17:48 Received message from Master: op=Shutter serial=45110 08:17:48 Shutter LASER close 08:17:48 Received message from Camera: op=State serial=45112 08:17:48 GetSingleValue result=40 Value=cccccccc 08:17:48 SkyScan query 08:17:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:17:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:49 Parameters OK 08:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:49 Set A/D data flow result=40 08:17:49 Set A/D channel type result=40 08:17:49 Set A/D encoding result=40 08:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:49 Set channel filter=0.000000e+000 result=40 08:17:49 Config A/D Result=40 08:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:49 Get A/D filter: -9.255963e+061 result=40 08:17:49 Get A/D value=-858993460 result=40 08:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:49 Parameters OK 08:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:49 Set A/D data flow result=40 08:17:49 Set A/D channel type result=40 08:17:49 Set A/D encoding result=40 08:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:49 Set channel filter=0.000000e+000 result=40 08:17:49 Config A/D Result=40 08:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:49 Get A/D filter: -9.255963e+061 result=40 08:17:49 Get A/D value=-858993460 result=40 08:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:49 Aux= 08:17:49 Message to Camera, serial 45112 queued 08:18:25 Received message from Master: op=PointingHead serial=45125 08:18:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:18:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:18:26 Point started: ret=0 08:18:26 point_skyscan result=0 08:18:26 Check angles 08:18:26 SkyScan query 08:18:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 08:18:27 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 08:18:27 Check angles 08:18:27 SkyScan query 08:18:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 08:18:28 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 08:18:28 Check angles 08:18:28 SkyScan query 08:18:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.16<-16344 Statuses=0008 0009 08:18:29 Msec=1500 True Az=112.995 Ze=-65.16 Az status=0008 Ze status=0009 08:18:29 Check angles 08:18:29 SkyScan query 08:18:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.13<-17742 Statuses=0008 0009 08:18:29 Msec=2250 True Az=112.995 Ze=-86.13 Az status=0008 Ze status=0009 08:18:29 Check angles 08:18:29 SkyScan query 08:18:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.07<-19138 Statuses=0008 0009 08:18:30 Msec=3000 True Az=112.995 Ze=-107.07 Az status=0008 Ze status=0009 08:18:30 Check angles 08:18:30 SkyScan query 08:18:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.025<-20535 Statuses=0008 0009 08:18:31 Msec=3750 True Az=112.995 Ze=-128.025 Az status=0008 Ze status=0009 08:18:31 Check angles 08:18:31 SkyScan query 08:18:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.98<-21932 Statuses=0008 0009 08:18:32 Msec=4500 True Az=112.995 Ze=-148.98 Az status=0008 Ze status=0009 08:18:32 Check angles 08:18:32 SkyScan query 08:18:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.92<-23328 Statuses=0008 0009 08:18:32 Msec=5250 True Az=112.995 Ze=-169.92 Az status=0008 Ze status=0009 08:18:32 Check angles 08:18:32 SkyScan query 08:18:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:18:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:18:33 Message to Master queued w/err=0: serial=45125 error=0 08:18:38 Received message from Master: op=Filter serial=45126 08:18:38 Color wheel filter change from 0 to 0 08:18:38 FLIGetFilterPos err=0 currentPosition=0 08:18:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:38 Filter is already there-color wheel unchanged 08:18:38 Received message from Master: op=Shutter serial=45127 08:18:38 Shutter LASER open 08:18:38 Received message from Camera: op=State serial=45129 08:18:38 GetSingleValue result=40 Value=cccccccc 08:18:38 SkyScan query 08:18:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:18:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:39 Parameters OK 08:18:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:39 Set A/D data flow result=40 08:18:39 Set A/D channel type result=40 08:18:39 Set A/D encoding result=40 08:18:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:39 Set channel filter=0.000000e+000 result=40 08:18:39 Config A/D Result=40 08:18:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:39 Get A/D filter: -9.255963e+061 result=40 08:18:39 Get A/D value=-858993460 result=40 08:18:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:39 Parameters OK 08:18:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:39 Set A/D data flow result=40 08:18:39 Set A/D channel type result=40 08:18:39 Set A/D encoding result=40 08:18:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:39 Set channel filter=0.000000e+000 result=40 08:18:39 Config A/D Result=40 08:18:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:39 Get A/D filter: -9.255963e+061 result=40 08:18:39 Get A/D value=-858993460 result=40 08:18:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:39 Aux= 08:18:39 Message to Camera, serial 45129 queued 08:18:47 Received message from Master: op=Shutter serial=45139 08:18:47 Shutter LASER close 08:18:48 Received message from Master: op=PointingHead serial=45143 08:18:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:18:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:18:48 Point started: ret=0 08:18:48 point_skyscan result=0 08:18:49 Check angles 08:18:49 SkyScan query 08:18:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 08:18:50 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 08:18:50 Check angles 08:18:50 SkyScan query 08:18:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 08:18:50 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 08:18:51 Check angles 08:18:51 SkyScan query 08:18:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 08:18:51 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 08:18:51 Check angles 08:18:51 SkyScan query 08:18:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 08:18:52 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 08:18:52 Check angles 08:18:52 SkyScan query 08:18:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.845<-15923 Statuses=0008 0009 08:18:53 Msec=3000 True Az=112.995 Ze=-58.845 Az status=0008 Ze status=0009 08:18:53 Check angles 08:18:53 SkyScan query 08:18:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 08:18:53 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 08:18:54 Check angles 08:18:54 SkyScan query 08:18:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.905<-13127 Statuses=0008 0009 08:18:54 Msec=4500 True Az=112.995 Ze=-16.905 Az status=0008 Ze status=0009 08:18:54 Check angles 08:18:54 SkyScan query 08:18:55 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 08:18:55 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 08:18:55 Check angles 08:18:55 SkyScan query 08:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:18:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:18:56 Message to Master queued w/err=0: serial=45143 error=0 08:19:01 Received message from Master: op=Filter serial=45144 08:19:01 Color wheel filter change from 0 to 0 08:19:01 FLIGetFilterPos err=0 currentPosition=0 08:19:01 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:01 Filter is already there-color wheel unchanged 08:19:01 Received message from Master: op=Shutter serial=45145 08:19:01 Shutter LASER close 08:19:01 Received message from Camera: op=State serial=45147 08:19:01 GetSingleValue result=40 Value=cccccccc 08:19:01 SkyScan query 08:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:19:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:02 Parameters OK 08:19:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:02 Set A/D data flow result=40 08:19:02 Set A/D channel type result=40 08:19:02 Set A/D encoding result=40 08:19:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:02 Set channel filter=0.000000e+000 result=40 08:19:02 Config A/D Result=40 08:19:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:02 Get A/D filter: -9.255963e+061 result=40 08:19:02 Get A/D value=-858993460 result=40 08:19:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:02 Parameters OK 08:19:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:02 Set A/D data flow result=40 08:19:02 Set A/D channel type result=40 08:19:02 Set A/D encoding result=40 08:19:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:02 Set channel filter=0.000000e+000 result=40 08:19:02 Config A/D Result=40 08:19:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:02 Get A/D filter: -9.255963e+061 result=40 08:19:02 Get A/D value=-858993460 result=40 08:19:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:02 Aux= 08:19:02 Message to Camera, serial 45147 queued 08:19:38 Received message from Master: op=PointingHead serial=45160 08:19:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:19:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:19:39 Point started: ret=0 08:19:39 point_skyscan result=0 08:19:40 Check angles 08:19:40 SkyScan query 08:19:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:19:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:19:40 Message to Master queued w/err=0: serial=45160 error=0 08:19:45 Received message from Master: op=Filter serial=45161 08:19:45 Color wheel filter change from 0 to 0 08:19:45 FLIGetFilterPos err=0 currentPosition=0 08:19:45 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:45 Filter is already there-color wheel unchanged 08:19:45 Received message from Master: op=Shutter serial=45162 08:19:45 Shutter LASER close 08:19:45 Received message from Camera: op=State serial=45164 08:19:45 GetSingleValue result=40 Value=cccccccc 08:19:45 SkyScan query 08:19:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:19:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:46 Parameters OK 08:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:46 Set A/D data flow result=40 08:19:46 Set A/D channel type result=40 08:19:46 Set A/D encoding result=40 08:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:46 Set channel filter=0.000000e+000 result=40 08:19:46 Config A/D Result=40 08:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:46 Get A/D filter: -9.255963e+061 result=40 08:19:46 Get A/D value=-858993460 result=40 08:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:46 Parameters OK 08:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:46 Set A/D data flow result=40 08:19:46 Set A/D channel type result=40 08:19:46 Set A/D encoding result=40 08:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:46 Set channel filter=0.000000e+000 result=40 08:19:46 Config A/D Result=40 08:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:46 Get A/D filter: -9.255963e+061 result=40 08:19:46 Get A/D value=-858993460 result=40 08:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:46 Aux= 08:19:46 Message to Camera, serial 45164 queued 08:20:23 Received message from Master: op=PointingHead serial=45177 08:20:23 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:20:23 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:20:23 Point started: ret=0 08:20:23 point_skyscan result=0 08:20:24 Check angles 08:20:24 SkyScan query 08:20:24 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 08:20:24 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 08:20:25 Check angles 08:20:25 SkyScan query 08:20:25 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.495<-12433 Statuses=0009 0008 08:20:25 Msec=750 True Az=153.6 Ze=-6.495 Az status=0009 Ze status=0008 08:20:25 Check angles 08:20:25 SkyScan query 08:20:26 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 08:20:26 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 08:20:26 Check angles 08:20:26 SkyScan query 08:20:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:20:27 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:20:27 Message to Master queued w/err=0: serial=45177 error=0 08:20:32 Received message from Master: op=Filter serial=45178 08:20:32 Color wheel filter change from 0 to 0 08:20:32 FLIGetFilterPos err=0 currentPosition=0 08:20:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:32 Filter is already there-color wheel unchanged 08:20:32 Received message from Master: op=Shutter serial=45179 08:20:32 Shutter LASER close 08:20:32 Received message from Camera: op=State serial=45181 08:20:32 GetSingleValue result=40 Value=cccccccc 08:20:32 SkyScan query 08:20:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:20:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:33 Parameters OK 08:20:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:33 Set A/D data flow result=40 08:20:33 Set A/D channel type result=40 08:20:33 Set A/D encoding result=40 08:20:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:33 Set channel filter=0.000000e+000 result=40 08:20:33 Config A/D Result=40 08:20:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:33 Get A/D filter: -9.255963e+061 result=40 08:20:33 Get A/D value=-858993460 result=40 08:20:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:33 Parameters OK 08:20:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:33 Set A/D data flow result=40 08:20:33 Set A/D channel type result=40 08:20:33 Set A/D encoding result=40 08:20:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:33 Set channel filter=0.000000e+000 result=40 08:20:33 Config A/D Result=40 08:20:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:33 Get A/D filter: -9.255963e+061 result=40 08:20:33 Get A/D value=-858993460 result=40 08:20:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:33 Aux= 08:20:33 Message to Camera, serial 45181 queued 08:21:09 Received message from Master: op=PointingHead serial=45194 08:21:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:21:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:21:10 Point started: ret=0 08:21:10 point_skyscan result=0 08:21:10 Check angles 08:21:10 SkyScan query 08:21:11 SkyScan query done: ret=0 az=152.655<-10177 ze=6.51<-11566 Statuses=0009 0008 08:21:11 Msec=0 True Az=152.655 Ze=6.51 Az status=0009 Ze status=0008 08:21:11 Check angles 08:21:11 SkyScan query 08:21:12 SkyScan query done: ret=0 az=135.255<-9017 ze=6.495<-11567 Statuses=0009 0008 08:21:12 Msec=750 True Az=135.255 Ze=6.495 Az status=0009 Ze status=0008 08:21:12 Check angles 08:21:12 SkyScan query 08:21:13 SkyScan query done: ret=0 az=117.45<-7830 ze=6.495<-11567 Statuses=0009 0008 08:21:13 Msec=1500 True Az=117.45 Ze=6.495 Az status=0009 Ze status=0008 08:21:13 Check angles 08:21:13 SkyScan query 08:21:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:21:13 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:21:13 Message to Master queued w/err=0: serial=45194 error=0 08:21:18 Received message from Master: op=Filter serial=45195 08:21:18 Color wheel filter change from 0 to 0 08:21:18 FLIGetFilterPos err=0 currentPosition=0 08:21:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:18 Filter is already there-color wheel unchanged 08:21:18 Received message from Master: op=Shutter serial=45196 08:21:18 Shutter LASER close 08:21:18 Received message from Camera: op=State serial=45198 08:21:18 GetSingleValue result=40 Value=cccccccc 08:21:18 SkyScan query 08:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:21:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:19 Parameters OK 08:21:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:19 Set A/D data flow result=40 08:21:19 Set A/D channel type result=40 08:21:19 Set A/D encoding result=40 08:21:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:19 Set channel filter=0.000000e+000 result=40 08:21:19 Config A/D Result=40 08:21:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:19 Get A/D filter: -9.255963e+061 result=40 08:21:19 Get A/D value=-858993460 result=40 08:21:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:19 Parameters OK 08:21:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:19 Set A/D data flow result=40 08:21:19 Set A/D channel type result=40 08:21:19 Set A/D encoding result=40 08:21:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:19 Set channel filter=0.000000e+000 result=40 08:21:19 Config A/D Result=40 08:21:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:19 Get A/D filter: -9.255963e+061 result=40 08:21:19 Get A/D value=-858993460 result=40 08:21:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:19 Aux= 08:21:19 Message to Camera, serial 45198 queued 08:21:56 Received message from Master: op=PointingHead serial=45211 08:21:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:21:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:21:56 Point started: ret=0 08:21:56 point_skyscan result=0 08:21:57 Check angles 08:21:57 SkyScan query 08:21:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.76<-13584 Statuses=0008 0009 08:21:58 Msec=0 True Az=112.995 Ze=-23.76 Az status=0008 Ze status=0009 08:21:58 Check angles 08:21:58 SkyScan query 08:21:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 08:21:58 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 08:21:59 Check angles 08:21:59 SkyScan query 08:21:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 08:21:59 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 08:21:59 Check angles 08:21:59 SkyScan query 08:22:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 08:22:00 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 08:22:00 Check angles 08:22:00 SkyScan query 08:22:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.985<-19199 Statuses=0008 0009 08:22:01 Msec=3000 True Az=112.995 Ze=-107.985 Az status=0008 Ze status=0009 08:22:01 Check angles 08:22:01 SkyScan query 08:22:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 08:22:01 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 08:22:02 Check angles 08:22:02 SkyScan query 08:22:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.88<-21992 Statuses=0008 0009 08:22:02 Msec=4500 True Az=112.995 Ze=-149.88 Az status=0008 Ze status=0009 08:22:02 Check angles 08:22:02 SkyScan query 08:22:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0008 0009 08:22:03 Msec=5250 True Az=112.995 Ze=-171.12 Az status=0008 Ze status=0009 08:22:03 Check angles 08:22:03 SkyScan query 08:22:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:22:04 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:22:04 Message to Master queued w/err=0: serial=45211 error=0 08:22:09 Received message from Master: op=Filter serial=45212 08:22:09 Color wheel filter change from 0 to 0 08:22:09 FLIGetFilterPos err=0 currentPosition=0 08:22:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:09 Filter is already there-color wheel unchanged 08:22:09 Received message from Master: op=Shutter serial=45213 08:22:09 Shutter LASER open 08:22:09 Received message from Camera: op=State serial=45215 08:22:09 GetSingleValue result=40 Value=cccccccc 08:22:09 SkyScan query 08:22:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:22:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:10 Parameters OK 08:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:10 Set A/D data flow result=40 08:22:10 Set A/D channel type result=40 08:22:10 Set A/D encoding result=40 08:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:10 Set channel filter=0.000000e+000 result=40 08:22:10 Config A/D Result=40 08:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:10 Get A/D filter: -9.255963e+061 result=40 08:22:10 Get A/D value=-858993460 result=40 08:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:10 Parameters OK 08:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:10 Set A/D data flow result=40 08:22:10 Set A/D channel type result=40 08:22:10 Set A/D encoding result=40 08:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:10 Set channel filter=0.000000e+000 result=40 08:22:10 Config A/D Result=40 08:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:10 Get A/D filter: -9.255963e+061 result=40 08:22:10 Get A/D value=-858993460 result=40 08:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:10 Aux= 08:22:10 Message to Camera, serial 45215 queued 08:22:18 Received message from Master: op=Shutter serial=45225 08:22:18 Shutter LASER close 08:22:18 Received message from Master: op=PointingHead serial=45229 08:22:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:22:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:22:19 Point started: ret=0 08:22:19 point_skyscan result=0 08:22:20 Check angles 08:22:20 SkyScan query 08:22:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 08:22:20 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 08:22:20 Check angles 08:22:20 SkyScan query 08:22:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 08:22:21 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 08:22:21 Check angles 08:22:21 SkyScan query 08:22:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.41<-18694 Statuses=0008 0009 08:22:22 Msec=1500 True Az=112.995 Ze=-100.41 Az status=0008 Ze status=0009 08:22:22 Check angles 08:22:22 SkyScan query 08:22:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 08:22:22 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 08:22:23 Check angles 08:22:23 SkyScan query 08:22:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.47<-15898 Statuses=0008 0009 08:22:23 Msec=3000 True Az=112.995 Ze=-58.47 Az status=0008 Ze status=0009 08:22:23 Check angles 08:22:23 SkyScan query 08:22:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 08:22:24 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 08:22:24 Check angles 08:22:24 SkyScan query 08:22:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 08:22:25 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 08:22:25 Check angles 08:22:25 SkyScan query 08:22:25 SkyScan query done: ret=0 az=112.995<-7533 ze=4.335<-11711 Statuses=0008 0009 08:22:25 Msec=5250 True Az=112.995 Ze=4.335 Az status=0008 Ze status=0009 08:22:26 Check angles 08:22:26 SkyScan query 08:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:22:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:22:26 Message to Master queued w/err=0: serial=45229 error=0 08:22:31 Received message from Master: op=Filter serial=45230 08:22:31 Color wheel filter change from 0 to 0 08:22:31 FLIGetFilterPos err=0 currentPosition=0 08:22:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:31 Filter is already there-color wheel unchanged 08:22:31 Received message from Master: op=Shutter serial=45231 08:22:31 Shutter LASER close 08:22:31 Received message from Camera: op=State serial=45233 08:22:31 GetSingleValue result=40 Value=cccccccc 08:22:31 SkyScan query 08:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:22:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:32 Parameters OK 08:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:32 Set A/D data flow result=40 08:22:32 Set A/D channel type result=40 08:22:32 Set A/D encoding result=40 08:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:32 Set channel filter=0.000000e+000 result=40 08:22:32 Config A/D Result=40 08:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:32 Get A/D filter: -9.255963e+061 result=40 08:22:32 Get A/D value=-858993460 result=40 08:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:32 Parameters OK 08:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:32 Set A/D data flow result=40 08:22:32 Set A/D channel type result=40 08:22:32 Set A/D encoding result=40 08:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:32 Set channel filter=0.000000e+000 result=40 08:22:32 Config A/D Result=40 08:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:32 Get A/D filter: -9.255963e+061 result=40 08:22:32 Get A/D value=-858993460 result=40 08:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:32 Aux= 08:22:32 Message to Camera, serial 45233 queued 08:23:09 Received message from Master: op=PointingHead serial=45246 08:23:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:23:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:23:09 Point started: ret=0 08:23:09 point_skyscan result=0 08:23:10 Check angles 08:23:10 SkyScan query 08:23:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:23:11 Message to Master queued w/err=0: serial=45246 error=0 08:23:16 Received message from Master: op=Filter serial=45247 08:23:16 Color wheel filter change from 0 to 0 08:23:16 FLIGetFilterPos err=0 currentPosition=0 08:23:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:16 Filter is already there-color wheel unchanged 08:23:16 Received message from Master: op=Shutter serial=45248 08:23:16 Shutter LASER close 08:23:16 Received message from Camera: op=State serial=45250 08:23:16 GetSingleValue result=40 Value=cccccccc 08:23:16 SkyScan query 08:23:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:16 Parameters OK 08:23:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:16 Set A/D data flow result=40 08:23:16 Set A/D channel type result=40 08:23:16 Set A/D encoding result=40 08:23:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:16 Set channel filter=0.000000e+000 result=40 08:23:16 Config A/D Result=40 08:23:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:16 Get A/D filter: -9.255963e+061 result=40 08:23:16 Get A/D value=-858993460 result=40 08:23:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:16 Parameters OK 08:23:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:16 Set A/D data flow result=40 08:23:16 Set A/D channel type result=40 08:23:16 Set A/D encoding result=40 08:23:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:16 Set channel filter=0.000000e+000 result=40 08:23:16 Config A/D Result=40 08:23:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:16 Get A/D filter: -9.255963e+061 result=40 08:23:16 Get A/D value=-858993460 result=40 08:23:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:16 Aux= 08:23:16 Message to Camera, serial 45250 queued [UTC 2019-3-1 08:23:50] 08:23:53 Received message from Master: op=PointingHead serial=45263 08:23:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:23:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:23:54 Point started: ret=0 08:23:54 point_skyscan result=0 08:23:54 Check angles 08:23:54 SkyScan query 08:23:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:23:55 Message to Master queued w/err=0: serial=45263 error=0 08:24:00 Received message from Master: op=Filter serial=45264 08:24:00 Color wheel filter change from 0 to 0 08:24:00 FLIGetFilterPos err=0 currentPosition=0 08:24:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:00 Filter is already there-color wheel unchanged 08:24:00 Received message from Master: op=Shutter serial=45265 08:24:00 Shutter LASER close 08:24:00 Received message from Camera: op=State serial=45267 08:24:00 GetSingleValue result=40 Value=cccccccc 08:24:00 SkyScan query 08:24:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:24:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:01 Parameters OK 08:24:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:01 Set A/D data flow result=40 08:24:01 Set A/D channel type result=40 08:24:01 Set A/D encoding result=40 08:24:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:01 Set channel filter=0.000000e+000 result=40 08:24:01 Config A/D Result=40 08:24:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:01 Get A/D filter: -9.255963e+061 result=40 08:24:01 Get A/D value=-858993460 result=40 08:24:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:01 Parameters OK 08:24:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:01 Set A/D data flow result=40 08:24:01 Set A/D channel type result=40 08:24:01 Set A/D encoding result=40 08:24:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:01 Set channel filter=0.000000e+000 result=40 08:24:01 Config A/D Result=40 08:24:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:01 Get A/D filter: -9.255963e+061 result=40 08:24:01 Get A/D value=-858993460 result=40 08:24:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:01 Aux= 08:24:01 Message to Camera, serial 45267 queued 08:24:37 Received message from Master: op=PointingHead serial=45280 08:24:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:24:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:24:38 Point started: ret=0 08:24:38 point_skyscan result=0 08:24:39 Check angles 08:24:39 SkyScan query 08:24:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:24:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:24:39 Message to Master queued w/err=0: serial=45280 error=0 08:24:44 Received message from Master: op=Filter serial=45281 08:24:44 Color wheel filter change from 0 to 0 08:24:44 FLIGetFilterPos err=0 currentPosition=0 08:24:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:44 Filter is already there-color wheel unchanged 08:24:44 Received message from Master: op=Shutter serial=45282 08:24:44 Shutter LASER close 08:24:44 Received message from Camera: op=State serial=45284 08:24:44 GetSingleValue result=40 Value=cccccccc 08:24:44 SkyScan query 08:24:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:24:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:45 Parameters OK 08:24:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:45 Set A/D data flow result=40 08:24:45 Set A/D channel type result=40 08:24:45 Set A/D encoding result=40 08:24:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:45 Set channel filter=0.000000e+000 result=40 08:24:45 Config A/D Result=40 08:24:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:45 Get A/D filter: -9.255963e+061 result=40 08:24:45 Get A/D value=-858993460 result=40 08:24:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:45 Parameters OK 08:24:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:45 Set A/D data flow result=40 08:24:45 Set A/D channel type result=40 08:24:45 Set A/D encoding result=40 08:24:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:45 Set channel filter=0.000000e+000 result=40 08:24:45 Config A/D Result=40 08:24:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:45 Get A/D filter: -9.255963e+061 result=40 08:24:45 Get A/D value=-858993460 result=40 08:24:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:45 Aux= 08:24:45 Message to Camera, serial 45284 queued 08:25:22 Received message from Master: op=PointingHead serial=45297 08:25:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:25:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:25:22 Point started: ret=0 08:25:22 point_skyscan result=0 08:25:23 Check angles 08:25:23 SkyScan query 08:25:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 08:25:24 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 08:25:24 Check angles 08:25:24 SkyScan query 08:25:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 08:25:24 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 08:25:24 Check angles 08:25:24 SkyScan query 08:25:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 08:25:25 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 08:25:25 Check angles 08:25:25 SkyScan query 08:25:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.225<-17815 Statuses=0008 0009 08:25:26 Msec=2250 True Az=112.995 Ze=-87.225 Az status=0008 Ze status=0009 08:25:26 Check angles 08:25:26 SkyScan query 08:25:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.165<-19211 Statuses=0008 0009 08:25:27 Msec=3000 True Az=112.995 Ze=-108.165 Az status=0008 Ze status=0009 08:25:27 Check angles 08:25:27 SkyScan query 08:25:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.12<-20608 Statuses=0008 0009 08:25:27 Msec=3750 True Az=112.995 Ze=-129.12 Az status=0008 Ze status=0009 08:25:27 Check angles 08:25:27 SkyScan query 08:25:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.075<-22005 Statuses=0008 0009 08:25:28 Msec=4500 True Az=112.995 Ze=-150.075 Az status=0008 Ze status=0009 08:25:28 Check angles 08:25:28 SkyScan query 08:25:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0008 0009 08:25:29 Msec=5250 True Az=112.995 Ze=-170.925 Az status=0008 Ze status=0009 08:25:29 Check angles 08:25:29 SkyScan query 08:25:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:25:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:25:30 Message to Master queued w/err=0: serial=45297 error=0 08:25:35 Received message from Master: op=Filter serial=45298 08:25:35 Color wheel filter change from 0 to 0 08:25:35 FLIGetFilterPos err=0 currentPosition=0 08:25:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:35 Filter is already there-color wheel unchanged 08:25:35 Received message from Master: op=Shutter serial=45299 08:25:35 Shutter LASER open 08:25:35 Received message from Camera: op=State serial=45301 08:25:35 GetSingleValue result=40 Value=cccccccc 08:25:35 SkyScan query 08:25:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:25:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:35 Parameters OK 08:25:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:35 Set A/D data flow result=40 08:25:35 Set A/D channel type result=40 08:25:35 Set A/D encoding result=40 08:25:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:35 Set channel filter=0.000000e+000 result=40 08:25:35 Config A/D Result=40 08:25:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:35 Get A/D filter: -9.255963e+061 result=40 08:25:35 Get A/D value=-858993460 result=40 08:25:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:35 Parameters OK 08:25:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:35 Set A/D data flow result=40 08:25:35 Set A/D channel type result=40 08:25:35 Set A/D encoding result=40 08:25:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:35 Set channel filter=0.000000e+000 result=40 08:25:35 Config A/D Result=40 08:25:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:35 Get A/D filter: -9.255963e+061 result=40 08:25:35 Get A/D value=-858993460 result=40 08:25:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:35 Aux= 08:25:35 Message to Camera, serial 45301 queued 08:25:44 Received message from Master: op=Shutter serial=45311 08:25:44 Shutter LASER close 08:25:45 Received message from Master: op=PointingHead serial=45315 08:25:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:25:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:25:45 Point started: ret=0 08:25:45 point_skyscan result=0 08:25:46 Check angles 08:25:46 SkyScan query 08:25:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 08:25:46 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 08:25:46 Check angles 08:25:46 SkyScan query 08:25:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 08:25:47 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 08:25:47 Check angles 08:25:47 SkyScan query 08:25:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 08:25:48 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 08:25:48 Check angles 08:25:48 SkyScan query 08:25:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.95<-17330 Statuses=0008 0009 08:25:48 Msec=2250 True Az=112.995 Ze=-79.95 Az status=0008 Ze status=0009 08:25:49 Check angles 08:25:49 SkyScan query 08:25:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.53<-15902 Statuses=0008 0009 08:25:49 Msec=3000 True Az=112.995 Ze=-58.53 Az status=0008 Ze status=0009 08:25:49 Check angles 08:25:49 SkyScan query 08:25:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.59<-14506 Statuses=0008 0009 08:25:50 Msec=3750 True Az=112.995 Ze=-37.59 Az status=0008 Ze status=0009 08:25:50 Check angles 08:25:50 SkyScan query 08:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.605<-13107 Statuses=0008 0009 08:25:51 Msec=4500 True Az=112.995 Ze=-16.605 Az status=0008 Ze status=0009 08:25:51 Check angles 08:25:51 SkyScan query 08:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=4.635<-11691 Statuses=0008 0009 08:25:52 Msec=5250 True Az=112.995 Ze=4.635 Az status=0008 Ze status=0009 08:25:52 Check angles 08:25:52 SkyScan query 08:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:25:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:25:52 Message to Master queued w/err=0: serial=45315 error=0 08:25:57 Received message from Master: op=Filter serial=45316 08:25:57 Color wheel filter change from 0 to 0 08:25:57 FLIGetFilterPos err=0 currentPosition=0 08:25:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:57 Filter is already there-color wheel unchanged 08:25:57 Received message from Master: op=Shutter serial=45317 08:25:57 Shutter LASER close 08:25:58 Received message from Camera: op=State serial=45319 08:25:58 GetSingleValue result=40 Value=cccccccc 08:25:58 SkyScan query 08:25:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:25:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:58 Parameters OK 08:25:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:58 Set A/D data flow result=40 08:25:58 Set A/D channel type result=40 08:25:58 Set A/D encoding result=40 08:25:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:58 Set channel filter=0.000000e+000 result=40 08:25:58 Config A/D Result=40 08:25:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:58 Get A/D filter: -9.255963e+061 result=40 08:25:58 Get A/D value=-858993460 result=40 08:25:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:58 Parameters OK 08:25:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:58 Set A/D data flow result=40 08:25:58 Set A/D channel type result=40 08:25:58 Set A/D encoding result=40 08:25:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:58 Set channel filter=0.000000e+000 result=40 08:25:58 Config A/D Result=40 08:25:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:58 Get A/D filter: -9.255963e+061 result=40 08:25:58 Get A/D value=-858993460 result=40 08:25:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:58 Aux= 08:25:58 Message to Camera, serial 45319 queued 08:26:35 Received message from Master: op=PointingHead serial=45331 08:26:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:26:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:26:35 Point started: ret=0 08:26:35 point_skyscan result=0 08:26:36 Check angles 08:26:36 SkyScan query 08:26:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:26:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:26:36 Message to Master queued w/err=0: serial=45331 error=0 08:26:42 Received message from Master: op=Filter serial=45332 08:26:42 Color wheel filter change from 0 to 0 08:26:42 FLIGetFilterPos err=0 currentPosition=0 08:26:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:42 Filter is already there-color wheel unchanged 08:26:47 Received message from Master: op=Shutter serial=45333 08:26:47 Shutter LASER close 08:26:47 Received message from Camera: op=State serial=45335 08:26:47 GetSingleValue result=40 Value=cccccccc 08:26:47 SkyScan query 08:26:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:26:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:48 Parameters OK 08:26:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:48 Set A/D data flow result=40 08:26:48 Set A/D channel type result=40 08:26:48 Set A/D encoding result=40 08:26:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:48 Set channel filter=0.000000e+000 result=40 08:26:48 Config A/D Result=40 08:26:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:48 Get A/D filter: -9.255963e+061 result=40 08:26:48 Get A/D value=-858993460 result=40 08:26:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:48 Parameters OK 08:26:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:48 Set A/D data flow result=40 08:26:48 Set A/D channel type result=40 08:26:48 Set A/D encoding result=40 08:26:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:48 Set channel filter=0.000000e+000 result=40 08:26:48 Config A/D Result=40 08:26:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:48 Get A/D filter: -9.255963e+061 result=40 08:26:48 Get A/D value=-858993460 result=40 08:26:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:48 Aux= 08:26:48 Message to Camera, serial 45335 queued 08:27:36 Received message from Master: op=PointingHead serial=45346 08:27:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:27:36 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:27:36 Point started: ret=0 08:27:36 point_skyscan result=0 08:27:37 Check angles 08:27:37 SkyScan query 08:27:37 SkyScan query done: ret=0 az=138.48<-9232 ze=-6.51<-12434 Statuses=0009 0008 08:27:37 Msec=0 True Az=138.48 Ze=-6.51 Az status=0009 Ze status=0008 08:27:38 Check angles 08:27:38 SkyScan query 08:27:38 SkyScan query done: ret=0 az=155.85<-10390 ze=-6.495<-12433 Statuses=0009 0008 08:27:38 Msec=750 True Az=155.85 Ze=-6.495 Az status=0009 Ze status=0008 08:27:38 Check angles 08:27:38 SkyScan query 08:27:39 SkyScan query done: ret=0 az=173.295<-11553 ze=-6.495<-12433 Statuses=0009 0008 08:27:39 Msec=1500 True Az=173.295 Ze=-6.495 Az status=0009 Ze status=0008 08:27:39 Check angles 08:27:39 SkyScan query 08:27:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:27:40 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:27:40 Message to Master queued w/err=0: serial=45346 error=0 08:27:45 Received message from Master: op=Filter serial=45347 08:27:45 Color wheel filter change from 0 to 0 08:27:45 FLIGetFilterPos err=0 currentPosition=0 08:27:45 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:46 Filter is already there-color wheel unchanged 08:27:46 Received message from Master: op=Shutter serial=45348 08:27:46 Shutter LASER close 08:27:46 Received message from Camera: op=State serial=45350 08:27:46 GetSingleValue result=40 Value=cccccccc 08:27:46 SkyScan query 08:27:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:27:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:47 Parameters OK 08:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:47 Set A/D data flow result=40 08:27:47 Set A/D channel type result=40 08:27:47 Set A/D encoding result=40 08:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:47 Set channel filter=0.000000e+000 result=40 08:27:47 Config A/D Result=40 08:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:47 Get A/D filter: -9.255963e+061 result=40 08:27:47 Get A/D value=-858993460 result=40 08:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:47 Parameters OK 08:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:47 Set A/D data flow result=40 08:27:47 Set A/D channel type result=40 08:27:47 Set A/D encoding result=40 08:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:47 Set channel filter=0.000000e+000 result=40 08:27:47 Config A/D Result=40 08:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:47 Get A/D filter: -9.255963e+061 result=40 08:27:47 Get A/D value=-858993460 result=40 08:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:47 Aux= 08:27:47 Message to Camera, serial 45350 queued 08:28:23 Received message from Master: op=PointingHead serial=45362 08:28:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:28:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:28:23 Point started: ret=0 08:28:23 point_skyscan result=0 08:28:24 Check angles 08:28:24 SkyScan query 08:28:25 SkyScan query done: ret=0 az=152.535<-10169 ze=6.51<-11566 Statuses=0009 0008 08:28:25 Msec=0 True Az=152.535 Ze=6.51 Az status=0009 Ze status=0008 08:28:25 Check angles 08:28:25 SkyScan query 08:28:25 SkyScan query done: ret=0 az=135.045<-9003 ze=6.495<-11567 Statuses=0009 0008 08:28:25 Msec=750 True Az=135.045 Ze=6.495 Az status=0009 Ze status=0008 08:28:26 Check angles 08:28:26 SkyScan query 08:28:26 SkyScan query done: ret=0 az=117.555<-7837 ze=6.495<-11567 Statuses=0009 0008 08:28:26 Msec=1500 True Az=117.555 Ze=6.495 Az status=0009 Ze status=0008 08:28:26 Check angles 08:28:26 SkyScan query 08:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:28:27 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:28:27 Message to Master queued w/err=0: serial=45362 error=0 08:28:32 Received message from Master: op=Filter serial=45363 08:28:32 Color wheel filter change from 0 to 0 08:28:32 FLIGetFilterPos err=0 currentPosition=0 08:28:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:32 Filter is already there-color wheel unchanged 08:28:32 Received message from Master: op=Shutter serial=45364 08:28:32 Shutter LASER close 08:28:33 Received message from Camera: op=State serial=45366 08:28:33 GetSingleValue result=40 Value=cccccccc 08:28:33 SkyScan query 08:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:28:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:33 Parameters OK 08:28:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:33 Set A/D data flow result=40 08:28:33 Set A/D channel type result=40 08:28:33 Set A/D encoding result=40 08:28:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:33 Set channel filter=0.000000e+000 result=40 08:28:33 Config A/D Result=40 08:28:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:33 Get A/D filter: -9.255963e+061 result=40 08:28:33 Get A/D value=-858993460 result=40 08:28:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:33 Parameters OK 08:28:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:33 Set A/D data flow result=40 08:28:33 Set A/D channel type result=40 08:28:33 Set A/D encoding result=40 08:28:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:33 Set channel filter=0.000000e+000 result=40 08:28:33 Config A/D Result=40 08:28:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:33 Get A/D filter: -9.255963e+061 result=40 08:28:33 Get A/D value=-858993460 result=40 08:28:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:33 Aux= 08:28:33 Message to Camera, serial 45366 queued 08:29:09 Received message from Master: op=PointingHead serial=45378 08:29:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:29:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:29:10 Point started: ret=0 08:29:10 point_skyscan result=0 08:29:10 Check angles 08:29:10 SkyScan query 08:29:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 08:29:11 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 08:29:11 Check angles 08:29:11 SkyScan query 08:29:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 08:29:12 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 08:29:12 Check angles 08:29:12 SkyScan query 08:29:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 08:29:13 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 08:29:13 Check angles 08:29:13 SkyScan query 08:29:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.225<-17815 Statuses=0008 0009 08:29:13 Msec=2250 True Az=112.995 Ze=-87.225 Az status=0008 Ze status=0009 08:29:13 Check angles 08:29:13 SkyScan query 08:29:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.18<-19212 Statuses=0008 0009 08:29:14 Msec=3000 True Az=112.995 Ze=-108.18 Az status=0008 Ze status=0009 08:29:14 Check angles 08:29:14 SkyScan query 08:29:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.12<-20608 Statuses=0008 0009 08:29:15 Msec=3750 True Az=112.995 Ze=-129.12 Az status=0008 Ze status=0009 08:29:15 Check angles 08:29:15 SkyScan query 08:29:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.09<-22006 Statuses=0008 0009 08:29:16 Msec=4500 True Az=112.995 Ze=-150.09 Az status=0008 Ze status=0009 08:29:16 Check angles 08:29:16 SkyScan query 08:29:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0008 0009 08:29:16 Msec=5250 True Az=112.995 Ze=-170.925 Az status=0008 Ze status=0009 08:29:16 Check angles 08:29:16 SkyScan query 08:29:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:29:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:29:17 Message to Master queued w/err=0: serial=45378 error=0 08:29:22 Received message from Master: op=Filter serial=45379 08:29:22 Color wheel filter change from 0 to 0 08:29:22 FLIGetFilterPos err=0 currentPosition=0 08:29:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:22 Filter is already there-color wheel unchanged 08:29:23 Received message from Master: op=Shutter serial=45380 08:29:23 Shutter LASER open 08:29:23 Received message from Camera: op=State serial=45382 08:29:23 GetSingleValue result=40 Value=cccccccc 08:29:23 SkyScan query 08:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:29:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:23 Parameters OK 08:29:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:23 Set A/D data flow result=40 08:29:23 Set A/D channel type result=40 08:29:23 Set A/D encoding result=40 08:29:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:23 Set channel filter=0.000000e+000 result=40 08:29:23 Config A/D Result=40 08:29:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:23 Get A/D filter: -9.255963e+061 result=40 08:29:23 Get A/D value=-858993460 result=40 08:29:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:23 Parameters OK 08:29:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:23 Set A/D data flow result=40 08:29:23 Set A/D channel type result=40 08:29:23 Set A/D encoding result=40 08:29:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:23 Set channel filter=0.000000e+000 result=40 08:29:23 Config A/D Result=40 08:29:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:23 Get A/D filter: -9.255963e+061 result=40 08:29:23 Get A/D value=-858993460 result=40 08:29:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:23 Aux= 08:29:23 Message to Camera, serial 45382 queued 08:29:31 Received message from Master: op=Shutter serial=45391 08:29:31 Shutter LASER close 08:29:32 Received message from Master: op=PointingHead serial=45395 08:29:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:29:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:29:32 Point started: ret=0 08:29:32 point_skyscan result=0 08:29:33 Check angles 08:29:33 SkyScan query 08:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 08:29:33 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 08:29:34 Check angles 08:29:34 SkyScan query 08:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 08:29:34 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 08:29:34 Check angles 08:29:34 SkyScan query 08:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.31<-18754 Statuses=0008 0009 08:29:35 Msec=1500 True Az=112.995 Ze=-101.31 Az status=0008 Ze status=0009 08:29:35 Check angles 08:29:35 SkyScan query 08:29:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.355<-17357 Statuses=0008 0009 08:29:36 Msec=2250 True Az=112.995 Ze=-80.355 Az status=0008 Ze status=0009 08:29:36 Check angles 08:29:36 SkyScan query 08:29:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.4<-15960 Statuses=0008 0009 08:29:36 Msec=3000 True Az=112.995 Ze=-59.4 Az status=0008 Ze status=0009 08:29:37 Check angles 08:29:37 SkyScan query 08:29:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.445<-14563 Statuses=0008 0009 08:29:37 Msec=3750 True Az=112.995 Ze=-38.445 Az status=0008 Ze status=0009 08:29:37 Check angles 08:29:37 SkyScan query 08:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.49<-13166 Statuses=0008 0009 08:29:38 Msec=4500 True Az=112.995 Ze=-17.49 Az status=0008 Ze status=0009 08:29:38 Check angles 08:29:38 SkyScan query 08:29:39 SkyScan query done: ret=0 az=112.995<-7533 ze=3.48<-11768 Statuses=0008 0009 08:29:39 Msec=5250 True Az=112.995 Ze=3.48 Az status=0008 Ze status=0009 08:29:39 Check angles 08:29:39 SkyScan query 08:29:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:29:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:29:39 Message to Master queued w/err=0: serial=45395 error=0 08:29:44 Received message from Master: op=Filter serial=45396 08:29:44 Color wheel filter change from 0 to 0 08:29:44 FLIGetFilterPos err=0 currentPosition=0 08:29:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:44 Filter is already there-color wheel unchanged 08:29:45 Received message from Master: op=Shutter serial=45397 08:29:45 Shutter LASER close 08:29:45 Received message from Camera: op=State serial=45399 08:29:45 GetSingleValue result=40 Value=cccccccc 08:29:45 SkyScan query 08:29:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:29:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:46 Parameters OK 08:29:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:46 Set A/D data flow result=40 08:29:46 Set A/D channel type result=40 08:29:46 Set A/D encoding result=40 08:29:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:46 Set channel filter=0.000000e+000 result=40 08:29:46 Config A/D Result=40 08:29:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:46 Get A/D filter: -9.255963e+061 result=40 08:29:46 Get A/D value=-858993460 result=40 08:29:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:46 Parameters OK 08:29:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:46 Set A/D data flow result=40 08:29:46 Set A/D channel type result=40 08:29:46 Set A/D encoding result=40 08:29:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:46 Set channel filter=0.000000e+000 result=40 08:29:46 Config A/D Result=40 08:29:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:46 Get A/D filter: -9.255963e+061 result=40 08:29:46 Get A/D value=-858993460 result=40 08:29:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:46 Aux= 08:29:46 Message to Camera, serial 45399 queued 08:30:22 Received message from Master: op=PointingHead serial=45411 08:30:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:30:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:30:22 Point started: ret=0 08:30:22 point_skyscan result=0 08:30:23 Check angles 08:30:23 SkyScan query 08:30:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:30:24 Message to Master queued w/err=0: serial=45411 error=0 08:30:29 Received message from Master: op=Filter serial=45412 08:30:29 Color wheel filter change from 0 to 0 08:30:29 FLIGetFilterPos err=0 currentPosition=0 08:30:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:29 Filter is already there-color wheel unchanged 08:30:29 Received message from Master: op=Shutter serial=45413 08:30:29 Shutter LASER close 08:30:29 Received message from Camera: op=State serial=45415 08:30:29 GetSingleValue result=40 Value=cccccccc 08:30:29 SkyScan query 08:30:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:30 Parameters OK 08:30:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:30 Set A/D data flow result=40 08:30:30 Set A/D channel type result=40 08:30:30 Set A/D encoding result=40 08:30:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:30 Set channel filter=0.000000e+000 result=40 08:30:30 Config A/D Result=40 08:30:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:30 Get A/D filter: -9.255963e+061 result=40 08:30:30 Get A/D value=-858993460 result=40 08:30:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:30 Parameters OK 08:30:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:30 Set A/D data flow result=40 08:30:30 Set A/D channel type result=40 08:30:30 Set A/D encoding result=40 08:30:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:30 Set channel filter=0.000000e+000 result=40 08:30:30 Config A/D Result=40 08:30:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:30 Get A/D filter: -9.255963e+061 result=40 08:30:30 Get A/D value=-858993460 result=40 08:30:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:30 Aux= 08:30:30 Message to Camera, serial 45415 queued 08:31:06 Received message from Master: op=PointingHead serial=45427 08:31:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:31:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:31:06 Point started: ret=0 08:31:06 point_skyscan result=0 08:31:07 Check angles 08:31:07 SkyScan query 08:31:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:31:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:31:08 Message to Master queued w/err=0: serial=45427 error=0 08:31:13 Received message from Master: op=Filter serial=45428 08:31:13 Color wheel filter change from 0 to 0 08:31:13 FLIGetFilterPos err=0 currentPosition=0 08:31:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:13 Filter is already there-color wheel unchanged 08:31:13 Received message from Master: op=Shutter serial=45429 08:31:13 Shutter LASER close 08:31:13 Received message from Camera: op=State serial=45431 08:31:13 GetSingleValue result=40 Value=cccccccc 08:31:13 SkyScan query 08:31:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:31:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:14 Parameters OK 08:31:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:14 Set A/D data flow result=40 08:31:14 Set A/D channel type result=40 08:31:14 Set A/D encoding result=40 08:31:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:14 Set channel filter=0.000000e+000 result=40 08:31:14 Config A/D Result=40 08:31:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:14 Get A/D filter: -9.255963e+061 result=40 08:31:14 Get A/D value=-858993460 result=40 08:31:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:14 Parameters OK 08:31:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:14 Set A/D data flow result=40 08:31:14 Set A/D channel type result=40 08:31:14 Set A/D encoding result=40 08:31:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:14 Set channel filter=0.000000e+000 result=40 08:31:14 Config A/D Result=40 08:31:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:14 Get A/D filter: -9.255963e+061 result=40 08:31:14 Get A/D value=-858993460 result=40 08:31:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:14 Aux= 08:31:14 Message to Camera, serial 45431 queued 08:31:50 Received message from Master: op=PointingHead serial=45443 08:31:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:31:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:31:51 Point started: ret=0 08:31:51 point_skyscan result=0 08:31:51 Check angles 08:31:51 SkyScan query 08:31:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:31:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:31:52 Message to Master queued w/err=0: serial=45443 error=0 08:31:57 Received message from Master: op=Filter serial=45444 08:31:57 Color wheel filter change from 0 to 0 08:31:57 FLIGetFilterPos err=0 currentPosition=0 08:31:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:57 Filter is already there-color wheel unchanged 08:31:57 Received message from Master: op=Shutter serial=45445 08:31:57 Shutter LASER close 08:31:57 Received message from Camera: op=State serial=45447 08:31:57 GetSingleValue result=40 Value=cccccccc 08:31:57 SkyScan query 08:31:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:31:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:58 Parameters OK 08:31:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:58 Set A/D data flow result=40 08:31:58 Set A/D channel type result=40 08:31:58 Set A/D encoding result=40 08:31:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:58 Set channel filter=0.000000e+000 result=40 08:31:58 Config A/D Result=40 08:31:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:58 Get A/D filter: -9.255963e+061 result=40 08:31:58 Get A/D value=-858993460 result=40 08:31:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:58 Parameters OK 08:31:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:58 Set A/D data flow result=40 08:31:58 Set A/D channel type result=40 08:31:58 Set A/D encoding result=40 08:31:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:58 Set channel filter=0.000000e+000 result=40 08:31:58 Config A/D Result=40 08:31:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:58 Get A/D filter: -9.255963e+061 result=40 08:31:58 Get A/D value=-858993460 result=40 08:31:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:58 Aux= 08:31:58 Message to Camera, serial 45447 queued 08:32:34 Received message from Master: op=PointingHead serial=45459 08:32:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:32:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:32:34 Point started: ret=0 08:32:34 point_skyscan result=0 08:32:35 Check angles 08:32:35 SkyScan query 08:32:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 08:32:36 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 08:32:36 Check angles 08:32:36 SkyScan query 08:32:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 08:32:37 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 08:32:37 Check angles 08:32:37 SkyScan query 08:32:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 08:32:37 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 08:32:37 Check angles 08:32:37 SkyScan query 08:32:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.565<-17771 Statuses=0008 0009 08:32:38 Msec=2250 True Az=112.995 Ze=-86.565 Az status=0008 Ze status=0009 08:32:38 Check angles 08:32:38 SkyScan query 08:32:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 08:32:39 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 08:32:39 Check angles 08:32:39 SkyScan query 08:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 08:32:40 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 08:32:40 Check angles 08:32:40 SkyScan query 08:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.415<-21961 Statuses=0008 0009 08:32:40 Msec=4500 True Az=112.995 Ze=-149.415 Az status=0008 Ze status=0009 08:32:40 Check angles 08:32:40 SkyScan query 08:32:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.355<-23357 Statuses=0008 0009 08:32:41 Msec=5250 True Az=112.995 Ze=-170.355 Az status=0008 Ze status=0009 08:32:41 Check angles 08:32:41 SkyScan query 08:32:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:32:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:32:42 Message to Master queued w/err=0: serial=45459 error=0 08:32:47 Received message from Master: op=Filter serial=45460 08:32:47 Color wheel filter change from 0 to 0 08:32:47 FLIGetFilterPos err=0 currentPosition=0 08:32:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:47 Filter is already there-color wheel unchanged 08:32:47 Received message from Master: op=Shutter serial=45461 08:32:47 Shutter LASER open 08:32:47 Received message from Camera: op=State serial=45463 08:32:47 GetSingleValue result=40 Value=cccccccc 08:32:47 SkyScan query 08:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:32:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:48 Parameters OK 08:32:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:48 Set A/D data flow result=40 08:32:48 Set A/D channel type result=40 08:32:48 Set A/D encoding result=40 08:32:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:48 Set channel filter=0.000000e+000 result=40 08:32:48 Config A/D Result=40 08:32:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:48 Get A/D filter: -9.255963e+061 result=40 08:32:48 Get A/D value=-858993460 result=40 08:32:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:48 Parameters OK 08:32:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:48 Set A/D data flow result=40 08:32:48 Set A/D channel type result=40 08:32:48 Set A/D encoding result=40 08:32:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:48 Set channel filter=0.000000e+000 result=40 08:32:48 Config A/D Result=40 08:32:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:48 Get A/D filter: -9.255963e+061 result=40 08:32:48 Get A/D value=-858993460 result=40 08:32:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:48 Aux= 08:32:48 Message to Camera, serial 45463 queued 08:32:56 Received message from Master: op=Shutter serial=45472 08:32:56 Shutter LASER close 08:32:57 Received message from Master: op=PointingHead serial=45476 08:32:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:32:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:32:57 Point started: ret=0 08:32:57 point_skyscan result=0 08:32:58 Check angles 08:32:58 SkyScan query 08:32:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 08:32:58 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 08:32:59 Check angles 08:32:59 SkyScan query 08:32:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 08:32:59 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 08:32:59 Check angles 08:32:59 SkyScan query 08:33:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 08:33:00 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 08:33:00 Check angles 08:33:00 SkyScan query 08:33:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 08:33:01 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 08:33:01 Check angles 08:33:01 SkyScan query 08:33:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 08:33:01 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 08:33:02 Check angles 08:33:02 SkyScan query 08:33:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.53<-14502 Statuses=0008 0009 08:33:02 Msec=3750 True Az=112.995 Ze=-37.53 Az status=0008 Ze status=0009 08:33:02 Check angles 08:33:02 SkyScan query 08:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.125<-13075 Statuses=0008 0009 08:33:03 Msec=4500 True Az=112.995 Ze=-16.125 Az status=0008 Ze status=0009 08:33:03 Check angles 08:33:03 SkyScan query 08:33:04 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 08:33:04 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 08:33:04 Check angles 08:33:04 SkyScan query 08:33:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:33:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:33:04 Message to Master queued w/err=0: serial=45476 error=0 08:33:09 Received message from Master: op=Filter serial=45477 08:33:09 Color wheel filter change from 0 to 0 08:33:09 FLIGetFilterPos err=0 currentPosition=0 08:33:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:09 Filter is already there-color wheel unchanged 08:33:10 Received message from Master: op=Shutter serial=45478 08:33:10 Shutter LASER close 08:33:10 Received message from Camera: op=State serial=45480 08:33:10 GetSingleValue result=40 Value=cccccccc 08:33:10 SkyScan query 08:33:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:33:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:11 Parameters OK 08:33:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:11 Set A/D data flow result=40 08:33:11 Set A/D channel type result=40 08:33:11 Set A/D encoding result=40 08:33:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:11 Set channel filter=0.000000e+000 result=40 08:33:11 Config A/D Result=40 08:33:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:11 Get A/D filter: -9.255963e+061 result=40 08:33:11 Get A/D value=-858993460 result=40 08:33:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:11 Parameters OK 08:33:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:11 Set A/D data flow result=40 08:33:11 Set A/D channel type result=40 08:33:11 Set A/D encoding result=40 08:33:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:11 Set channel filter=0.000000e+000 result=40 08:33:11 Config A/D Result=40 08:33:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:11 Get A/D filter: -9.255963e+061 result=40 08:33:11 Get A/D value=-858993460 result=40 08:33:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:11 Aux= 08:33:11 Message to Camera, serial 45480 queued 08:33:38 Received message from Master: op=Identify serial=45481 08:33:47 Received message from Master: op=PointingHead serial=45495 08:33:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:33:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:33:47 Point started: ret=0 08:33:47 point_skyscan result=0 08:33:48 Check angles 08:33:48 SkyScan query 08:33:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:33:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:33:49 Message to Master queued w/err=0: serial=45495 error=0 08:33:54 Received message from Master: op=Filter serial=45496 08:33:54 Color wheel filter change from 0 to 0 08:33:54 FLIGetFilterPos err=0 currentPosition=0 08:33:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:54 Filter is already there-color wheel unchanged 08:33:54 Received message from Master: op=Shutter serial=45497 08:33:54 Shutter LASER close 08:33:54 Received message from Camera: op=State serial=45499 08:33:54 GetSingleValue result=40 Value=cccccccc 08:33:54 SkyScan query 08:33:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:33:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:55 Parameters OK 08:33:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:55 Set A/D data flow result=40 08:33:55 Set A/D channel type result=40 08:33:55 Set A/D encoding result=40 08:33:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:55 Set channel filter=0.000000e+000 result=40 08:33:55 Config A/D Result=40 08:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:55 Get A/D filter: -9.255963e+061 result=40 08:33:55 Get A/D value=-858993460 result=40 08:33:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:55 Parameters OK 08:33:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:55 Set A/D data flow result=40 08:33:55 Set A/D channel type result=40 08:33:55 Set A/D encoding result=40 08:33:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:55 Set channel filter=0.000000e+000 result=40 08:33:55 Config A/D Result=40 08:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:55 Get A/D filter: -9.255963e+061 result=40 08:33:55 Get A/D value=-858993460 result=40 08:33:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:55 Aux= 08:33:55 Message to Camera, serial 45499 queued 08:34:31 Received message from Master: op=PointingHead serial=45511 08:34:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:34:31 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:34:31 Point started: ret=0 08:34:31 point_skyscan result=0 08:34:32 Check angles 08:34:32 SkyScan query 08:34:33 SkyScan query done: ret=0 az=136.38<-9092 ze=-6.51<-12434 Statuses=0009 0008 08:34:33 Msec=0 True Az=136.38 Ze=-6.51 Az status=0009 Ze status=0008 08:34:33 Check angles 08:34:33 SkyScan query [UTC 2019-3-1 08:34:33] 08:34:33 SkyScan query done: ret=0 az=153.855<-10257 ze=-6.495<-12433 Statuses=0009 0008 08:34:33 Msec=750 True Az=153.855 Ze=-6.495 Az status=0009 Ze status=0008 08:34:34 Check angles 08:34:34 SkyScan query 08:34:34 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 08:34:34 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 08:34:34 Check angles 08:34:34 SkyScan query 08:34:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:34:35 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:34:35 Message to Master queued w/err=0: serial=45511 error=0 08:34:40 Received message from Master: op=Filter serial=45512 08:34:40 Color wheel filter change from 0 to 0 08:34:40 FLIGetFilterPos err=0 currentPosition=0 08:34:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:40 Filter is already there-color wheel unchanged 08:34:40 Received message from Master: op=Shutter serial=45513 08:34:40 Shutter LASER close 08:34:40 Received message from Camera: op=State serial=45515 08:34:40 GetSingleValue result=40 Value=cccccccc 08:34:40 SkyScan query 08:34:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:34:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:41 Parameters OK 08:34:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:41 Set A/D data flow result=40 08:34:41 Set A/D channel type result=40 08:34:41 Set A/D encoding result=40 08:34:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:41 Set channel filter=0.000000e+000 result=40 08:34:41 Config A/D Result=40 08:34:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:41 Get A/D filter: -9.255963e+061 result=40 08:34:41 Get A/D value=-858993460 result=40 08:34:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:41 Parameters OK 08:34:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:41 Set A/D data flow result=40 08:34:41 Set A/D channel type result=40 08:34:41 Set A/D encoding result=40 08:34:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:41 Set channel filter=0.000000e+000 result=40 08:34:41 Config A/D Result=40 08:34:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:41 Get A/D filter: -9.255963e+061 result=40 08:34:41 Get A/D value=-858993460 result=40 08:34:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:41 Aux= 08:34:41 Message to Camera, serial 45515 queued 08:35:17 Received message from Master: op=PointingHead serial=45527 08:35:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:35:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:35:18 Point started: ret=0 08:35:18 point_skyscan result=0 08:35:18 Check angles 08:35:18 SkyScan query 08:35:19 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 08:35:19 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 08:35:19 Check angles 08:35:19 SkyScan query 08:35:20 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 08:35:20 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 08:35:20 Check angles 08:35:20 SkyScan query 08:35:20 SkyScan query done: ret=0 az=117.33<-7822 ze=6.495<-11567 Statuses=0009 0008 08:35:20 Msec=1500 True Az=117.33 Ze=6.495 Az status=0009 Ze status=0008 08:35:21 Check angles 08:35:21 SkyScan query 08:35:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:35:21 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:35:21 Message to Master queued w/err=0: serial=45527 error=0 08:35:26 Received message from Master: op=Filter serial=45528 08:35:26 Color wheel filter change from 0 to 0 08:35:26 FLIGetFilterPos err=0 currentPosition=0 08:35:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:26 Filter is already there-color wheel unchanged 08:35:27 Received message from Master: op=Shutter serial=45529 08:35:27 Shutter LASER close 08:35:27 Received message from Camera: op=State serial=45531 08:35:27 GetSingleValue result=40 Value=cccccccc 08:35:27 SkyScan query 08:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:35:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:27 Parameters OK 08:35:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:27 Set A/D data flow result=40 08:35:27 Set A/D channel type result=40 08:35:27 Set A/D encoding result=40 08:35:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:27 Set channel filter=0.000000e+000 result=40 08:35:27 Config A/D Result=40 08:35:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:27 Get A/D filter: -9.255963e+061 result=40 08:35:27 Get A/D value=-858993460 result=40 08:35:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:27 Parameters OK 08:35:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:27 Set A/D data flow result=40 08:35:27 Set A/D channel type result=40 08:35:27 Set A/D encoding result=40 08:35:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:27 Set channel filter=0.000000e+000 result=40 08:35:27 Config A/D Result=40 08:35:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:27 Get A/D filter: -9.255963e+061 result=40 08:35:27 Get A/D value=-858993460 result=40 08:35:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:27 Aux= 08:35:27 Message to Camera, serial 45531 queued 08:36:04 Received message from Master: op=PointingHead serial=45543 08:36:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:36:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:36:04 Point started: ret=0 08:36:04 point_skyscan result=0 08:36:05 Check angles 08:36:05 SkyScan query 08:36:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 08:36:05 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 08:36:05 Check angles 08:36:05 SkyScan query 08:36:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 08:36:06 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 08:36:06 Check angles 08:36:06 SkyScan query 08:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 08:36:07 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 08:36:07 Check angles 08:36:07 SkyScan query 08:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 08:36:07 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 08:36:08 Check angles 08:36:08 SkyScan query 08:36:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.46<-19164 Statuses=0008 0009 08:36:08 Msec=3000 True Az=112.995 Ze=-107.46 Az status=0008 Ze status=0009 08:36:08 Check angles 08:36:08 SkyScan query 08:36:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.835<-20589 Statuses=0008 0009 08:36:09 Msec=3750 True Az=112.995 Ze=-128.835 Az status=0008 Ze status=0009 08:36:09 Check angles 08:36:09 SkyScan query 08:36:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.24<-22016 Statuses=0008 0009 08:36:10 Msec=4500 True Az=112.995 Ze=-150.24 Az status=0008 Ze status=0009 08:36:10 Check angles 08:36:10 SkyScan query 08:36:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0008 0009 08:36:11 Msec=5250 True Az=112.995 Ze=-171.045 Az status=0008 Ze status=0009 08:36:11 Check angles 08:36:11 SkyScan query 08:36:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:36:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:36:11 Message to Master queued w/err=0: serial=45543 error=0 08:36:16 Received message from Master: op=Filter serial=45544 08:36:16 Color wheel filter change from 0 to 0 08:36:16 FLIGetFilterPos err=0 currentPosition=0 08:36:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:16 Filter is already there-color wheel unchanged 08:36:17 Received message from Master: op=Shutter serial=45545 08:36:17 Shutter LASER open 08:36:17 Received message from Camera: op=State serial=45547 08:36:17 GetSingleValue result=40 Value=cccccccc 08:36:17 SkyScan query 08:36:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:36:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:18 Parameters OK 08:36:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:18 Set A/D data flow result=40 08:36:18 Set A/D channel type result=40 08:36:18 Set A/D encoding result=40 08:36:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:18 Set channel filter=0.000000e+000 result=40 08:36:18 Config A/D Result=40 08:36:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:18 Get A/D filter: -9.255963e+061 result=40 08:36:18 Get A/D value=-858993460 result=40 08:36:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:18 Parameters OK 08:36:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:18 Set A/D data flow result=40 08:36:18 Set A/D channel type result=40 08:36:18 Set A/D encoding result=40 08:36:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:18 Set channel filter=0.000000e+000 result=40 08:36:18 Config A/D Result=40 08:36:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:18 Get A/D filter: -9.255963e+061 result=40 08:36:18 Get A/D value=-858993460 result=40 08:36:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:18 Aux= 08:36:18 Message to Camera, serial 45547 queued 08:36:25 Received message from Master: op=Shutter serial=45556 08:36:25 Shutter LASER close 08:36:26 Received message from Master: op=PointingHead serial=45560 08:36:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:36:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:36:26 Point started: ret=0 08:36:26 point_skyscan result=0 08:36:27 Check angles 08:36:27 SkyScan query 08:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 08:36:28 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 08:36:28 Check angles 08:36:28 SkyScan query 08:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.95<-20130 Statuses=0008 0009 08:36:28 Msec=750 True Az=112.995 Ze=-121.95 Az status=0008 Ze status=0009 08:36:29 Check angles 08:36:29 SkyScan query 08:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 08:36:29 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 08:36:29 Check angles 08:36:29 SkyScan query 08:36:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.62<-17308 Statuses=0008 0009 08:36:30 Msec=2250 True Az=112.995 Ze=-79.62 Az status=0008 Ze status=0009 08:36:30 Check angles 08:36:30 SkyScan query 08:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.665<-15911 Statuses=0008 0009 08:36:31 Msec=3000 True Az=112.995 Ze=-58.665 Az status=0008 Ze status=0009 08:36:31 Check angles 08:36:31 SkyScan query 08:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 08:36:31 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 08:36:32 Check angles 08:36:32 SkyScan query 08:36:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.29<-13086 Statuses=0008 0009 08:36:32 Msec=4500 True Az=112.995 Ze=-16.29 Az status=0008 Ze status=0009 08:36:32 Check angles 08:36:32 SkyScan query 08:36:33 SkyScan query done: ret=0 az=112.995<-7533 ze=4.86<-11676 Statuses=0008 0009 08:36:33 Msec=5250 True Az=112.995 Ze=4.86 Az status=0008 Ze status=0009 08:36:33 Check angles 08:36:33 SkyScan query 08:36:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:36:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:36:34 Message to Master queued w/err=0: serial=45560 error=0 08:36:39 Received message from Master: op=Filter serial=45561 08:36:39 Color wheel filter change from 0 to 0 08:36:39 FLIGetFilterPos err=0 currentPosition=0 08:36:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:39 Filter is already there-color wheel unchanged 08:36:39 Received message from Master: op=Shutter serial=45562 08:36:39 Shutter LASER close 08:36:39 Received message from Camera: op=State serial=45564 08:36:39 GetSingleValue result=40 Value=cccccccc 08:36:39 SkyScan query 08:36:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:36:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:40 Parameters OK 08:36:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:40 Set A/D data flow result=40 08:36:40 Set A/D channel type result=40 08:36:40 Set A/D encoding result=40 08:36:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:40 Set channel filter=0.000000e+000 result=40 08:36:40 Config A/D Result=40 08:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:40 Get A/D filter: -9.255963e+061 result=40 08:36:40 Get A/D value=-858993460 result=40 08:36:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:40 Parameters OK 08:36:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:40 Set A/D data flow result=40 08:36:40 Set A/D channel type result=40 08:36:40 Set A/D encoding result=40 08:36:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:40 Set channel filter=0.000000e+000 result=40 08:36:40 Config A/D Result=40 08:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:40 Get A/D filter: -9.255963e+061 result=40 08:36:40 Get A/D value=-858993460 result=40 08:36:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:40 Aux= 08:36:40 Message to Camera, serial 45564 queued 08:37:16 Received message from Master: op=PointingHead serial=45576 08:37:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:37:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:37:17 Point started: ret=0 08:37:17 point_skyscan result=0 08:37:17 Check angles 08:37:17 SkyScan query 08:37:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:37:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:37:18 Message to Master queued w/err=0: serial=45576 error=0 08:37:23 Received message from Master: op=Filter serial=45577 08:37:23 Color wheel filter change from 0 to 0 08:37:23 FLIGetFilterPos err=0 currentPosition=0 08:37:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:23 Filter is already there-color wheel unchanged 08:37:23 Received message from Master: op=Shutter serial=45578 08:37:23 Shutter LASER close 08:37:23 Received message from Camera: op=State serial=45580 08:37:23 GetSingleValue result=40 Value=cccccccc 08:37:23 SkyScan query 08:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:37:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:24 Parameters OK 08:37:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:24 Set A/D data flow result=40 08:37:24 Set A/D channel type result=40 08:37:24 Set A/D encoding result=40 08:37:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:24 Set channel filter=0.000000e+000 result=40 08:37:24 Config A/D Result=40 08:37:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:24 Get A/D filter: -9.255963e+061 result=40 08:37:24 Get A/D value=-858993460 result=40 08:37:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:24 Parameters OK 08:37:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:24 Set A/D data flow result=40 08:37:24 Set A/D channel type result=40 08:37:24 Set A/D encoding result=40 08:37:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:24 Set channel filter=0.000000e+000 result=40 08:37:24 Config A/D Result=40 08:37:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:24 Get A/D filter: -9.255963e+061 result=40 08:37:24 Get A/D value=-858993460 result=40 08:37:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:24 Aux= 08:37:24 Message to Camera, serial 45580 queued 08:38:00 Received message from Master: op=PointingHead serial=45592 08:38:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:38:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:38:00 Point started: ret=0 08:38:00 point_skyscan result=0 08:38:01 Check angles 08:38:01 SkyScan query 08:38:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:38:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:38:01 Message to Master queued w/err=0: serial=45592 error=0 08:38:06 Received message from Master: op=Filter serial=45593 08:38:06 Color wheel filter change from 0 to 0 08:38:06 FLIGetFilterPos err=0 currentPosition=0 08:38:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:06 Filter is already there-color wheel unchanged 08:38:07 Received message from Master: op=Shutter serial=45594 08:38:07 Shutter LASER close 08:38:07 Received message from Camera: op=State serial=45596 08:38:07 GetSingleValue result=40 Value=cccccccc 08:38:07 SkyScan query 08:38:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:38:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:07 Parameters OK 08:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:07 Set A/D data flow result=40 08:38:07 Set A/D channel type result=40 08:38:07 Set A/D encoding result=40 08:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:07 Set channel filter=0.000000e+000 result=40 08:38:07 Config A/D Result=40 08:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:07 Get A/D filter: -9.255963e+061 result=40 08:38:07 Get A/D value=-858993460 result=40 08:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:07 Parameters OK 08:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:07 Set A/D data flow result=40 08:38:07 Set A/D channel type result=40 08:38:07 Set A/D encoding result=40 08:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:07 Set channel filter=0.000000e+000 result=40 08:38:07 Config A/D Result=40 08:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:07 Get A/D filter: -9.255963e+061 result=40 08:38:07 Get A/D value=-858993460 result=40 08:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:07 Aux= 08:38:07 Message to Camera, serial 45596 queued 08:38:44 Received message from Master: op=PointingHead serial=45609 08:38:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:38:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:38:44 Point started: ret=0 08:38:44 point_skyscan result=0 08:38:45 Check angles 08:38:45 SkyScan query 08:38:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:38:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:38:46 Message to Master queued w/err=0: serial=45609 error=0 08:38:51 Received message from Master: op=Filter serial=45610 08:38:51 Color wheel filter change from 0 to 0 08:38:51 FLIGetFilterPos err=0 currentPosition=0 08:38:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:51 Filter is already there-color wheel unchanged 08:38:51 Received message from Master: op=Shutter serial=45611 08:38:51 Shutter LASER close 08:38:51 Received message from Camera: op=State serial=45613 08:38:51 GetSingleValue result=40 Value=cccccccc 08:38:51 SkyScan query 08:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:38:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:52 Parameters OK 08:38:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:52 Set A/D data flow result=40 08:38:52 Set A/D channel type result=40 08:38:52 Set A/D encoding result=40 08:38:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:52 Set channel filter=0.000000e+000 result=40 08:38:52 Config A/D Result=40 08:38:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:52 Get A/D filter: -9.255963e+061 result=40 08:38:52 Get A/D value=-858993460 result=40 08:38:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:52 Parameters OK 08:38:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:52 Set A/D data flow result=40 08:38:52 Set A/D channel type result=40 08:38:52 Set A/D encoding result=40 08:38:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:52 Set channel filter=0.000000e+000 result=40 08:38:52 Config A/D Result=40 08:38:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:52 Get A/D filter: -9.255963e+061 result=40 08:38:52 Get A/D value=-858993460 result=40 08:38:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:52 Aux= 08:38:52 Message to Camera, serial 45613 queued 08:39:28 Received message from Master: op=PointingHead serial=45626 08:39:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:39:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:39:29 Point started: ret=0 08:39:29 point_skyscan result=0 08:39:29 Check angles 08:39:29 SkyScan query 08:39:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 08:39:30 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 08:39:30 Check angles 08:39:30 SkyScan query 08:39:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 08:39:31 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 08:39:31 Check angles 08:39:31 SkyScan query 08:39:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.04<-16336 Statuses=0008 0009 08:39:32 Msec=1500 True Az=112.995 Ze=-65.04 Az status=0008 Ze status=0009 08:39:32 Check angles 08:39:32 SkyScan query 08:39:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.98<-17732 Statuses=0008 0009 08:39:32 Msec=2250 True Az=112.995 Ze=-85.98 Az status=0008 Ze status=0009 08:39:32 Check angles 08:39:32 SkyScan query 08:39:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.95<-19130 Statuses=0008 0009 08:39:33 Msec=3000 True Az=112.995 Ze=-106.95 Az status=0008 Ze status=0009 08:39:33 Check angles 08:39:33 SkyScan query 08:39:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.92<-20528 Statuses=0008 0009 08:39:34 Msec=3750 True Az=112.995 Ze=-127.92 Az status=0008 Ze status=0009 08:39:34 Check angles 08:39:34 SkyScan query 08:39:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.86<-21924 Statuses=0008 0009 08:39:35 Msec=4500 True Az=112.995 Ze=-148.86 Az status=0008 Ze status=0009 08:39:35 Check angles 08:39:35 SkyScan query 08:39:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.8<-23320 Statuses=0008 0009 08:39:35 Msec=5250 True Az=112.995 Ze=-169.8 Az status=0008 Ze status=0009 08:39:35 Check angles 08:39:35 SkyScan query 08:39:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:39:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:39:36 Message to Master queued w/err=0: serial=45626 error=0 08:39:41 Received message from Master: op=Filter serial=45627 08:39:41 Color wheel filter change from 0 to 0 08:39:41 FLIGetFilterPos err=0 currentPosition=0 08:39:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:41 Filter is already there-color wheel unchanged 08:39:41 Received message from Master: op=Shutter serial=45628 08:39:41 Shutter LASER open 08:39:41 Received message from Camera: op=State serial=45630 08:39:41 GetSingleValue result=40 Value=cccccccc 08:39:41 SkyScan query 08:39:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:39:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:42 Parameters OK 08:39:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:42 Set A/D data flow result=40 08:39:42 Set A/D channel type result=40 08:39:42 Set A/D encoding result=40 08:39:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:42 Set channel filter=0.000000e+000 result=40 08:39:42 Config A/D Result=40 08:39:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:42 Get A/D filter: -9.255963e+061 result=40 08:39:42 Get A/D value=-858993460 result=40 08:39:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:42 Parameters OK 08:39:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:42 Set A/D data flow result=40 08:39:42 Set A/D channel type result=40 08:39:42 Set A/D encoding result=40 08:39:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:42 Set channel filter=0.000000e+000 result=40 08:39:42 Config A/D Result=40 08:39:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:42 Get A/D filter: -9.255963e+061 result=40 08:39:42 Get A/D value=-858993460 result=40 08:39:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:42 Aux= 08:39:42 Message to Camera, serial 45630 queued 08:39:49 Received message from Master: op=Shutter serial=45639 08:39:50 Shutter LASER close 08:39:50 Received message from Master: op=PointingHead serial=45643 08:39:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:39:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:39:50 Point started: ret=0 08:39:50 point_skyscan result=0 08:39:51 Check angles 08:39:51 SkyScan query 08:39:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 08:39:52 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 08:39:52 Check angles 08:39:52 SkyScan query 08:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 08:39:53 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 08:39:53 Check angles 08:39:53 SkyScan query 08:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 08:39:53 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 08:39:53 Check angles 08:39:53 SkyScan query 08:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 08:39:54 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 08:39:54 Check angles 08:39:54 SkyScan query 08:39:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 08:39:55 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 08:39:55 Check angles 08:39:55 SkyScan query 08:39:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 08:39:56 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 08:39:56 Check angles 08:39:56 SkyScan query 08:39:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.905<-13127 Statuses=0008 0009 08:39:56 Msec=4500 True Az=112.995 Ze=-16.905 Az status=0008 Ze status=0009 08:39:56 Check angles 08:39:56 SkyScan query 08:39:57 SkyScan query done: ret=0 az=112.995<-7533 ze=4.41<-11706 Statuses=0008 0009 08:39:57 Msec=5250 True Az=112.995 Ze=4.41 Az status=0008 Ze status=0009 08:39:57 Check angles 08:39:57 SkyScan query 08:39:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:39:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:39:58 Message to Master queued w/err=0: serial=45643 error=0 08:40:03 Received message from Master: op=Filter serial=45644 08:40:03 Color wheel filter change from 0 to 0 08:40:03 FLIGetFilterPos err=0 currentPosition=0 08:40:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:03 Filter is already there-color wheel unchanged 08:40:03 Received message from Master: op=Shutter serial=45645 08:40:03 Shutter LASER close 08:40:03 Received message from Camera: op=State serial=45647 08:40:03 GetSingleValue result=40 Value=cccccccc 08:40:03 SkyScan query 08:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:40:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:04 Parameters OK 08:40:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:04 Set A/D data flow result=40 08:40:04 Set A/D channel type result=40 08:40:04 Set A/D encoding result=40 08:40:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:04 Set channel filter=0.000000e+000 result=40 08:40:04 Config A/D Result=40 08:40:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:04 Get A/D filter: -9.255963e+061 result=40 08:40:04 Get A/D value=-858993460 result=40 08:40:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:04 Parameters OK 08:40:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:04 Set A/D data flow result=40 08:40:04 Set A/D channel type result=40 08:40:04 Set A/D encoding result=40 08:40:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:04 Set channel filter=0.000000e+000 result=40 08:40:04 Config A/D Result=40 08:40:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:04 Get A/D filter: -9.255963e+061 result=40 08:40:04 Get A/D value=-858993460 result=40 08:40:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:04 Aux= 08:40:04 Message to Camera, serial 45647 queued 08:40:41 Received message from Master: op=PointingHead serial=45660 08:40:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:40:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:40:41 Point started: ret=0 08:40:41 point_skyscan result=0 08:40:42 Check angles 08:40:42 SkyScan query 08:40:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:40:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:40:42 Message to Master queued w/err=0: serial=45660 error=0 08:40:47 Received message from Master: op=Filter serial=45661 08:40:47 Color wheel filter change from 0 to 0 08:40:47 FLIGetFilterPos err=0 currentPosition=0 08:40:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:47 Filter is already there-color wheel unchanged 08:40:47 Received message from Master: op=Shutter serial=45662 08:40:47 Shutter LASER close 08:40:47 Received message from Camera: op=State serial=45664 08:40:47 GetSingleValue result=40 Value=cccccccc 08:40:47 SkyScan query 08:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:40:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:48 Parameters OK 08:40:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:48 Set A/D data flow result=40 08:40:48 Set A/D channel type result=40 08:40:48 Set A/D encoding result=40 08:40:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:48 Set channel filter=0.000000e+000 result=40 08:40:48 Config A/D Result=40 08:40:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:48 Get A/D filter: -9.255963e+061 result=40 08:40:48 Get A/D value=-858993460 result=40 08:40:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:48 Parameters OK 08:40:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:48 Set A/D data flow result=40 08:40:48 Set A/D channel type result=40 08:40:48 Set A/D encoding result=40 08:40:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:48 Set channel filter=0.000000e+000 result=40 08:40:48 Config A/D Result=40 08:40:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:48 Get A/D filter: -9.255963e+061 result=40 08:40:48 Get A/D value=-858993460 result=40 08:40:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:48 Aux= 08:40:48 Message to Camera, serial 45664 queued 08:41:25 Received message from Master: op=PointingHead serial=45677 08:41:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:41:25 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:41:25 Point started: ret=0 08:41:25 point_skyscan result=0 08:41:26 Check angles 08:41:26 SkyScan query 08:41:26 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 08:41:26 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 08:41:27 Check angles 08:41:27 SkyScan query 08:41:27 SkyScan query done: ret=0 az=153.675<-10245 ze=-6.495<-12433 Statuses=0009 0008 08:41:27 Msec=750 True Az=153.675 Ze=-6.495 Az status=0009 Ze status=0008 08:41:27 Check angles 08:41:27 SkyScan query 08:41:28 SkyScan query done: ret=0 az=171.18<-11412 ze=-6.495<-12433 Statuses=0009 0008 08:41:28 Msec=1500 True Az=171.18 Ze=-6.495 Az status=0009 Ze status=0008 08:41:28 Check angles 08:41:28 SkyScan query 08:41:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:41:29 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:41:29 Message to Master queued w/err=0: serial=45677 error=0 08:41:34 Received message from Master: op=Filter serial=45678 08:41:34 Color wheel filter change from 0 to 0 08:41:34 FLIGetFilterPos err=0 currentPosition=0 08:41:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:41:34 Filter is already there-color wheel unchanged 08:41:34 Received message from Master: op=Shutter serial=45679 08:41:34 Shutter LASER close 08:41:34 Received message from Camera: op=State serial=45681 08:41:34 GetSingleValue result=40 Value=cccccccc 08:41:34 SkyScan query 08:41:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:41:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:35 Parameters OK 08:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:35 Set A/D data flow result=40 08:41:35 Set A/D channel type result=40 08:41:35 Set A/D encoding result=40 08:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:35 Set channel filter=0.000000e+000 result=40 08:41:35 Config A/D Result=40 08:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:35 Get A/D filter: -9.255963e+061 result=40 08:41:35 Get A/D value=-858993460 result=40 08:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:35 Parameters OK 08:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:35 Set A/D data flow result=40 08:41:35 Set A/D channel type result=40 08:41:35 Set A/D encoding result=40 08:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:35 Set channel filter=0.000000e+000 result=40 08:41:35 Config A/D Result=40 08:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:35 Get A/D filter: -9.255963e+061 result=40 08:41:35 Get A/D value=-858993460 result=40 08:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:35 Aux= 08:41:35 Message to Camera, serial 45681 queued 08:42:11 Received message from Master: op=PointingHead serial=45694 08:42:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:42:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:42:12 Point started: ret=0 08:42:12 point_skyscan result=0 08:42:12 Check angles 08:42:12 SkyScan query 08:42:13 SkyScan query done: ret=0 az=152.895<-10193 ze=6.51<-11566 Statuses=0009 0008 08:42:13 Msec=0 True Az=152.895 Ze=6.51 Az status=0009 Ze status=0008 08:42:13 Check angles 08:42:13 SkyScan query 08:42:14 SkyScan query done: ret=0 az=135.45<-9030 ze=6.495<-11567 Statuses=0009 0008 08:42:14 Msec=750 True Az=135.45 Ze=6.495 Az status=0009 Ze status=0008 08:42:14 Check angles 08:42:14 SkyScan query 08:42:15 SkyScan query done: ret=0 az=118.02<-7868 ze=6.495<-11567 Statuses=0009 0008 08:42:15 Msec=1500 True Az=118.02 Ze=6.495 Az status=0009 Ze status=0008 08:42:15 Check angles 08:42:15 SkyScan query 08:42:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:42:15 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:42:15 Message to Master queued w/err=0: serial=45694 error=0 08:42:20 Received message from Master: op=Filter serial=45695 08:42:20 Color wheel filter change from 0 to 0 08:42:20 FLIGetFilterPos err=0 currentPosition=0 08:42:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:20 Filter is already there-color wheel unchanged 08:42:20 Received message from Master: op=Shutter serial=45696 08:42:20 Shutter LASER close 08:42:21 Received message from Camera: op=State serial=45698 08:42:21 GetSingleValue result=40 Value=cccccccc 08:42:21 SkyScan query 08:42:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:42:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:21 Parameters OK 08:42:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:21 Set A/D data flow result=40 08:42:21 Set A/D channel type result=40 08:42:21 Set A/D encoding result=40 08:42:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:21 Set channel filter=0.000000e+000 result=40 08:42:21 Config A/D Result=40 08:42:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:21 Get A/D filter: -9.255963e+061 result=40 08:42:21 Get A/D value=-858993460 result=40 08:42:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:21 Parameters OK 08:42:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:21 Set A/D data flow result=40 08:42:21 Set A/D channel type result=40 08:42:21 Set A/D encoding result=40 08:42:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:21 Set channel filter=0.000000e+000 result=40 08:42:21 Config A/D Result=40 08:42:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:21 Get A/D filter: -9.255963e+061 result=40 08:42:21 Get A/D value=-858993460 result=40 08:42:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:21 Aux= 08:42:21 Message to Camera, serial 45698 queued 08:42:58 Received message from Master: op=PointingHead serial=45711 08:42:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:42:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:42:58 Point started: ret=0 08:42:58 point_skyscan result=0 08:42:59 Check angles 08:42:59 SkyScan query 08:43:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 08:43:00 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 08:43:00 Check angles 08:43:00 SkyScan query 08:43:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 08:43:00 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 08:43:01 Check angles 08:43:01 SkyScan query 08:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.04<-16336 Statuses=0008 0009 08:43:01 Msec=1500 True Az=112.995 Ze=-65.04 Az status=0008 Ze status=0009 08:43:01 Check angles 08:43:01 SkyScan query 08:43:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.995<-17733 Statuses=0008 0009 08:43:02 Msec=2250 True Az=112.995 Ze=-85.995 Az status=0008 Ze status=0009 08:43:02 Check angles 08:43:02 SkyScan query 08:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.935<-19129 Statuses=0008 0009 08:43:03 Msec=3000 True Az=112.995 Ze=-106.935 Az status=0008 Ze status=0009 08:43:03 Check angles 08:43:03 SkyScan query 08:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.905<-20527 Statuses=0008 0009 08:43:03 Msec=3750 True Az=112.995 Ze=-127.905 Az status=0008 Ze status=0009 08:43:04 Check angles 08:43:04 SkyScan query 08:43:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.845<-21923 Statuses=0008 0009 08:43:04 Msec=4500 True Az=112.995 Ze=-148.845 Az status=0008 Ze status=0009 08:43:04 Check angles 08:43:04 SkyScan query 08:43:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.8<-23320 Statuses=0008 0009 08:43:05 Msec=5250 True Az=112.995 Ze=-169.8 Az status=0008 Ze status=0009 08:43:05 Check angles 08:43:05 SkyScan query 08:43:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:43:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:43:06 Message to Master queued w/err=0: serial=45711 error=0 08:43:11 Received message from Master: op=Filter serial=45712 08:43:11 Color wheel filter change from 0 to 0 08:43:11 FLIGetFilterPos err=0 currentPosition=0 08:43:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:11 Filter is already there-color wheel unchanged 08:43:11 Received message from Master: op=Shutter serial=45713 08:43:11 Shutter LASER open 08:43:11 Received message from Camera: op=State serial=45715 08:43:11 GetSingleValue result=40 Value=cccccccc 08:43:11 SkyScan query 08:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:43:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:12 Parameters OK 08:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:12 Set A/D data flow result=40 08:43:12 Set A/D channel type result=40 08:43:12 Set A/D encoding result=40 08:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:12 Set channel filter=0.000000e+000 result=40 08:43:12 Config A/D Result=40 08:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:12 Get A/D filter: -9.255963e+061 result=40 08:43:12 Get A/D value=-858993460 result=40 08:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:12 Parameters OK 08:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:12 Set A/D data flow result=40 08:43:12 Set A/D channel type result=40 08:43:12 Set A/D encoding result=40 08:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:12 Set channel filter=0.000000e+000 result=40 08:43:12 Config A/D Result=40 08:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:12 Get A/D filter: -9.255963e+061 result=40 08:43:12 Get A/D value=-858993460 result=40 08:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:12 Aux= 08:43:12 Message to Camera, serial 45715 queued 08:43:19 Received message from Master: op=Shutter serial=45724 08:43:19 Shutter LASER close 08:43:19 Received message from Master: op=PointingHead serial=45728 08:43:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:43:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:43:20 Point started: ret=0 08:43:20 point_skyscan result=0 08:43:21 Check angles 08:43:21 SkyScan query 08:43:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 08:43:21 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 08:43:21 Check angles 08:43:21 SkyScan query 08:43:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 08:43:22 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 08:43:22 Check angles 08:43:22 SkyScan query 08:43:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.31<-18754 Statuses=0008 0009 08:43:23 Msec=1500 True Az=112.995 Ze=-101.31 Az status=0008 Ze status=0009 08:43:23 Check angles 08:43:23 SkyScan query 08:43:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.92<-17328 Statuses=0008 0009 08:43:23 Msec=2250 True Az=112.995 Ze=-79.92 Az status=0008 Ze status=0009 08:43:24 Check angles 08:43:24 SkyScan query 08:43:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 08:43:24 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 08:43:24 Check angles 08:43:24 SkyScan query 08:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.575<-14505 Statuses=0008 0009 08:43:25 Msec=3750 True Az=112.995 Ze=-37.575 Az status=0008 Ze status=0009 08:43:25 Check angles 08:43:25 SkyScan query 08:43:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.155<-13077 Statuses=0008 0009 08:43:26 Msec=4500 True Az=112.995 Ze=-16.155 Az status=0008 Ze status=0009 08:43:26 Check angles 08:43:26 SkyScan query 08:43:26 SkyScan query done: ret=0 az=112.995<-7533 ze=4.965<-11669 Statuses=0008 0009 08:43:26 Msec=5250 True Az=112.995 Ze=4.965 Az status=0008 Ze status=0009 08:43:27 Check angles 08:43:27 SkyScan query 08:43:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:43:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:43:27 Message to Master queued w/err=0: serial=45728 error=0 08:43:32 Received message from Master: op=Filter serial=45729 08:43:32 Color wheel filter change from 0 to 0 08:43:32 FLIGetFilterPos err=0 currentPosition=0 08:43:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:32 Filter is already there-color wheel unchanged 08:43:32 Received message from Master: op=Shutter serial=45730 08:43:32 Shutter LASER close 08:43:33 Received message from Camera: op=State serial=45732 08:43:33 GetSingleValue result=40 Value=cccccccc 08:43:33 SkyScan query 08:43:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:33 Parameters OK 08:43:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:33 Set A/D data flow result=40 08:43:33 Set A/D channel type result=40 08:43:33 Set A/D encoding result=40 08:43:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:33 Set channel filter=0.000000e+000 result=40 08:43:33 Config A/D Result=40 08:43:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:33 Get A/D filter: -9.255963e+061 result=40 08:43:33 Get A/D value=-858993460 result=40 08:43:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:33 Parameters OK 08:43:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:33 Set A/D data flow result=40 08:43:33 Set A/D channel type result=40 08:43:33 Set A/D encoding result=40 08:43:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:33 Set channel filter=0.000000e+000 result=40 08:43:33 Config A/D Result=40 08:43:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:33 Get A/D filter: -9.255963e+061 result=40 08:43:33 Get A/D value=-858993460 result=40 08:43:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:33 Aux= 08:43:33 Message to Camera, serial 45732 queued [UTC 2019-3-1 08:43:50] 08:44:10 Received message from Master: op=PointingHead serial=45745 08:44:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:44:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:44:10 Point started: ret=0 08:44:10 point_skyscan result=0 08:44:11 Check angles 08:44:11 SkyScan query 08:44:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:44:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:44:12 Message to Master queued w/err=0: serial=45745 error=0 08:44:17 Received message from Master: op=Filter serial=45746 08:44:17 Color wheel filter change from 0 to 0 08:44:17 FLIGetFilterPos err=0 currentPosition=0 08:44:17 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:17 Filter is already there-color wheel unchanged 08:44:17 Received message from Master: op=Shutter serial=45747 08:44:17 Shutter LASER close 08:44:17 Received message from Camera: op=State serial=45749 08:44:17 GetSingleValue result=40 Value=cccccccc 08:44:17 SkyScan query 08:44:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:44:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:17 Parameters OK 08:44:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:17 Set A/D data flow result=40 08:44:17 Set A/D channel type result=40 08:44:17 Set A/D encoding result=40 08:44:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:17 Set channel filter=0.000000e+000 result=40 08:44:17 Config A/D Result=40 08:44:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:17 Get A/D filter: -9.255963e+061 result=40 08:44:17 Get A/D value=-858993460 result=40 08:44:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:17 Parameters OK 08:44:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:17 Set A/D data flow result=40 08:44:17 Set A/D channel type result=40 08:44:17 Set A/D encoding result=40 08:44:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:17 Set channel filter=0.000000e+000 result=40 08:44:17 Config A/D Result=40 08:44:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:17 Get A/D filter: -9.255963e+061 result=40 08:44:17 Get A/D value=-858993460 result=40 08:44:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:17 Aux= 08:44:17 Message to Camera, serial 45749 queued 08:44:54 Received message from Master: op=PointingHead serial=45762 08:44:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:44:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:44:55 Point started: ret=0 08:44:55 point_skyscan result=0 08:44:55 Check angles 08:44:55 SkyScan query 08:44:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:44:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:44:56 Message to Master queued w/err=0: serial=45762 error=0 08:45:01 Received message from Master: op=Filter serial=45763 08:45:01 Color wheel filter change from 0 to 0 08:45:01 FLIGetFilterPos err=0 currentPosition=0 08:45:01 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:01 Filter is already there-color wheel unchanged 08:45:01 Received message from Master: op=Shutter serial=45764 08:45:01 Shutter LASER close 08:45:01 Received message from Camera: op=State serial=45766 08:45:01 GetSingleValue result=40 Value=cccccccc 08:45:01 SkyScan query 08:45:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:45:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:02 Parameters OK 08:45:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:02 Set A/D data flow result=40 08:45:02 Set A/D channel type result=40 08:45:02 Set A/D encoding result=40 08:45:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:02 Set channel filter=0.000000e+000 result=40 08:45:02 Config A/D Result=40 08:45:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:02 Get A/D filter: -9.255963e+061 result=40 08:45:02 Get A/D value=-858993460 result=40 08:45:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:02 Parameters OK 08:45:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:02 Set A/D data flow result=40 08:45:02 Set A/D channel type result=40 08:45:02 Set A/D encoding result=40 08:45:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:02 Set channel filter=0.000000e+000 result=40 08:45:02 Config A/D Result=40 08:45:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:02 Get A/D filter: -9.255963e+061 result=40 08:45:02 Get A/D value=-858993460 result=40 08:45:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:02 Aux= 08:45:02 Message to Camera, serial 45766 queued 08:45:39 Received message from Master: op=PointingHead serial=45779 08:45:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:45:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:45:39 Point started: ret=0 08:45:39 point_skyscan result=0 08:45:40 Check angles 08:45:40 SkyScan query 08:45:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:45:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:45:40 Message to Master queued w/err=0: serial=45779 error=0 08:45:45 Received message from Master: op=Filter serial=45780 08:45:45 Color wheel filter change from 0 to 0 08:45:45 FLIGetFilterPos err=0 currentPosition=0 08:45:45 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:45 Filter is already there-color wheel unchanged 08:45:45 Received message from Master: op=Shutter serial=45781 08:45:45 Shutter LASER close 08:45:45 Received message from Camera: op=State serial=45783 08:45:45 GetSingleValue result=40 Value=cccccccc 08:45:45 SkyScan query 08:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:45:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:46 Parameters OK 08:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:46 Set A/D data flow result=40 08:45:46 Set A/D channel type result=40 08:45:46 Set A/D encoding result=40 08:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:46 Set channel filter=0.000000e+000 result=40 08:45:46 Config A/D Result=40 08:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:46 Get A/D filter: -9.255963e+061 result=40 08:45:46 Get A/D value=-858993460 result=40 08:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:46 Parameters OK 08:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:46 Set A/D data flow result=40 08:45:46 Set A/D channel type result=40 08:45:46 Set A/D encoding result=40 08:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:46 Set channel filter=0.000000e+000 result=40 08:45:46 Config A/D Result=40 08:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:46 Get A/D filter: -9.255963e+061 result=40 08:45:46 Get A/D value=-858993460 result=40 08:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:46 Aux= 08:45:46 Message to Camera, serial 45783 queued 08:46:23 Received message from Master: op=PointingHead serial=45796 08:46:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:46:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:46:23 Point started: ret=0 08:46:23 point_skyscan result=0 08:46:24 Check angles 08:46:24 SkyScan query 08:46:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 08:46:25 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 08:46:25 Check angles 08:46:25 SkyScan query 08:46:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 08:46:25 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 08:46:25 Check angles 08:46:25 SkyScan query 08:46:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.94<-16396 Statuses=0008 0009 08:46:26 Msec=1500 True Az=112.995 Ze=-65.94 Az status=0008 Ze status=0009 08:46:26 Check angles 08:46:26 SkyScan query 08:46:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.895<-17793 Statuses=0008 0009 08:46:27 Msec=2250 True Az=112.995 Ze=-86.895 Az status=0008 Ze status=0009 08:46:27 Check angles 08:46:27 SkyScan query 08:46:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.85<-19190 Statuses=0008 0009 08:46:28 Msec=3000 True Az=112.995 Ze=-107.85 Az status=0008 Ze status=0009 08:46:28 Check angles 08:46:28 SkyScan query 08:46:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.79<-20586 Statuses=0008 0009 08:46:28 Msec=3750 True Az=112.995 Ze=-128.79 Az status=0008 Ze status=0009 08:46:28 Check angles 08:46:28 SkyScan query 08:46:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.195<-22013 Statuses=0008 0009 08:46:29 Msec=4500 True Az=112.995 Ze=-150.195 Az status=0008 Ze status=0009 08:46:29 Check angles 08:46:29 SkyScan query 08:46:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 08:46:30 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 08:46:30 Check angles 08:46:30 SkyScan query 08:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:46:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:46:31 Message to Master queued w/err=0: serial=45796 error=0 08:46:36 Received message from Master: op=Filter serial=45797 08:46:36 Color wheel filter change from 0 to 0 08:46:36 FLIGetFilterPos err=0 currentPosition=0 08:46:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:36 Filter is already there-color wheel unchanged 08:46:36 Received message from Master: op=Shutter serial=45798 08:46:36 Shutter LASER open 08:46:36 Received message from Camera: op=State serial=45800 08:46:36 GetSingleValue result=40 Value=cccccccc 08:46:36 SkyScan query 08:46:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:46:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:36 Parameters OK 08:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:36 Set A/D data flow result=40 08:46:36 Set A/D channel type result=40 08:46:36 Set A/D encoding result=40 08:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:36 Set channel filter=0.000000e+000 result=40 08:46:36 Config A/D Result=40 08:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:36 Get A/D filter: -9.255963e+061 result=40 08:46:36 Get A/D value=-858993460 result=40 08:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:36 Parameters OK 08:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:36 Set A/D data flow result=40 08:46:36 Set A/D channel type result=40 08:46:36 Set A/D encoding result=40 08:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:36 Set channel filter=0.000000e+000 result=40 08:46:36 Config A/D Result=40 08:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:36 Get A/D filter: -9.255963e+061 result=40 08:46:36 Get A/D value=-858993460 result=40 08:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:36 Aux= 08:46:36 Message to Camera, serial 45800 queued 08:46:45 Received message from Master: op=Shutter serial=45810 08:46:45 Shutter LASER close 08:46:46 Received message from Master: op=PointingHead serial=45814 08:46:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:46:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:46:46 Point started: ret=0 08:46:46 point_skyscan result=0 08:46:47 Check angles 08:46:47 SkyScan query 08:46:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 08:46:47 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 08:46:47 Check angles 08:46:47 SkyScan query 08:46:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 08:46:48 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 08:46:48 Check angles 08:46:48 SkyScan query 08:46:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.325<-18755 Statuses=0008 0009 08:46:49 Msec=1500 True Az=112.995 Ze=-101.325 Az status=0008 Ze status=0009 08:46:49 Check angles 08:46:49 SkyScan query 08:46:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.355<-17357 Statuses=0008 0009 08:46:49 Msec=2250 True Az=112.995 Ze=-80.355 Az status=0008 Ze status=0009 08:46:50 Check angles 08:46:50 SkyScan query 08:46:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.4<-15960 Statuses=0008 0009 08:46:50 Msec=3000 True Az=112.995 Ze=-59.4 Az status=0008 Ze status=0009 08:46:50 Check angles 08:46:50 SkyScan query 08:46:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.43<-14562 Statuses=0008 0009 08:46:51 Msec=3750 True Az=112.995 Ze=-38.43 Az status=0008 Ze status=0009 08:46:51 Check angles 08:46:51 SkyScan query 08:46:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.505<-13167 Statuses=0008 0009 08:46:52 Msec=4500 True Az=112.995 Ze=-17.505 Az status=0008 Ze status=0009 08:46:52 Check angles 08:46:52 SkyScan query 08:46:52 SkyScan query done: ret=0 az=112.995<-7533 ze=3.465<-11769 Statuses=0008 0009 08:46:52 Msec=5250 True Az=112.995 Ze=3.465 Az status=0008 Ze status=0009 08:46:53 Check angles 08:46:53 SkyScan query 08:46:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:46:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:46:53 Message to Master queued w/err=0: serial=45814 error=0 08:46:58 Received message from Master: op=Filter serial=45815 08:46:58 Color wheel filter change from 0 to 0 08:46:58 FLIGetFilterPos err=0 currentPosition=0 08:46:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:58 Filter is already there-color wheel unchanged 08:46:58 Received message from Master: op=Shutter serial=45816 08:46:58 Shutter LASER close 08:46:59 Received message from Camera: op=State serial=45818 08:46:59 GetSingleValue result=40 Value=cccccccc 08:46:59 SkyScan query 08:46:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:46:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:59 Parameters OK 08:46:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:59 Set A/D data flow result=40 08:46:59 Set A/D channel type result=40 08:46:59 Set A/D encoding result=40 08:46:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:59 Set channel filter=0.000000e+000 result=40 08:46:59 Config A/D Result=40 08:46:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:59 Get A/D filter: -9.255963e+061 result=40 08:46:59 Get A/D value=-858993460 result=40 08:46:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:59 Parameters OK 08:46:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:59 Set A/D data flow result=40 08:46:59 Set A/D channel type result=40 08:46:59 Set A/D encoding result=40 08:46:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:59 Set channel filter=0.000000e+000 result=40 08:46:59 Config A/D Result=40 08:46:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:59 Get A/D filter: -9.255963e+061 result=40 08:46:59 Get A/D value=-858993460 result=40 08:46:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:59 Aux= 08:46:59 Message to Camera, serial 45818 queued 08:47:36 Received message from Master: op=PointingHead serial=45831 08:47:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:47:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:47:36 Point started: ret=0 08:47:36 point_skyscan result=0 08:47:37 Check angles 08:47:37 SkyScan query 08:47:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:47:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:47:38 Message to Master queued w/err=0: serial=45831 error=0 08:47:43 Received message from Master: op=Filter serial=45832 08:47:43 Color wheel filter change from 0 to 0 08:47:43 FLIGetFilterPos err=0 currentPosition=0 08:47:43 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:43 Filter is already there-color wheel unchanged 08:47:43 Received message from Master: op=Shutter serial=45833 08:47:43 Shutter LASER close 08:47:43 Received message from Camera: op=State serial=45835 08:47:43 GetSingleValue result=40 Value=cccccccc 08:47:43 SkyScan query 08:47:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:47:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:43 Parameters OK 08:47:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:43 Set A/D data flow result=40 08:47:43 Set A/D channel type result=40 08:47:43 Set A/D encoding result=40 08:47:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:43 Set channel filter=0.000000e+000 result=40 08:47:43 Config A/D Result=40 08:47:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:43 Get A/D filter: -9.255963e+061 result=40 08:47:43 Get A/D value=-858993460 result=40 08:47:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:43 Parameters OK 08:47:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:43 Set A/D data flow result=40 08:47:43 Set A/D channel type result=40 08:47:43 Set A/D encoding result=40 08:47:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:43 Set channel filter=0.000000e+000 result=40 08:47:43 Config A/D Result=40 08:47:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:43 Get A/D filter: -9.255963e+061 result=40 08:47:43 Get A/D value=-858993460 result=40 08:47:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:43 Aux= 08:47:43 Message to Camera, serial 45835 queued 08:48:20 Received message from Master: op=PointingHead serial=45848 08:48:20 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:48:20 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:48:21 Point started: ret=0 08:48:21 point_skyscan result=0 08:48:21 Check angles 08:48:21 SkyScan query 08:48:22 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 08:48:22 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 08:48:22 Check angles 08:48:22 SkyScan query 08:48:23 SkyScan query done: ret=0 az=153.315<-10221 ze=-6.495<-12433 Statuses=0009 0008 08:48:23 Msec=750 True Az=153.315 Ze=-6.495 Az status=0009 Ze status=0008 08:48:23 Check angles 08:48:23 SkyScan query 08:48:23 SkyScan query done: ret=0 az=170.835<-11389 ze=-6.495<-12433 Statuses=0009 0008 08:48:23 Msec=1500 True Az=170.835 Ze=-6.495 Az status=0009 Ze status=0008 08:48:24 Check angles 08:48:24 SkyScan query 08:48:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:48:24 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:48:24 Message to Master queued w/err=0: serial=45848 error=0 08:48:29 Received message from Master: op=Filter serial=45849 08:48:29 Color wheel filter change from 0 to 0 08:48:29 FLIGetFilterPos err=0 currentPosition=0 08:48:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:29 Filter is already there-color wheel unchanged 08:48:29 Received message from Master: op=Shutter serial=45850 08:48:29 Shutter LASER close 08:48:29 Received message from Camera: op=State serial=45852 08:48:29 GetSingleValue result=40 Value=cccccccc 08:48:29 SkyScan query 08:48:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:48:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:30 Parameters OK 08:48:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:30 Set A/D data flow result=40 08:48:30 Set A/D channel type result=40 08:48:30 Set A/D encoding result=40 08:48:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:30 Set channel filter=0.000000e+000 result=40 08:48:30 Config A/D Result=40 08:48:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:30 Get A/D filter: -9.255963e+061 result=40 08:48:30 Get A/D value=-858993460 result=40 08:48:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:30 Parameters OK 08:48:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:30 Set A/D data flow result=40 08:48:30 Set A/D channel type result=40 08:48:30 Set A/D encoding result=40 08:48:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:30 Set channel filter=0.000000e+000 result=40 08:48:30 Config A/D Result=40 08:48:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:30 Get A/D filter: -9.255963e+061 result=40 08:48:30 Get A/D value=-858993460 result=40 08:48:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:30 Aux= 08:48:30 Message to Camera, serial 45852 queued 08:49:07 Received message from Master: op=PointingHead serial=45865 08:49:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:49:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:49:07 Point started: ret=0 08:49:07 point_skyscan result=0 08:49:08 Check angles 08:49:08 SkyScan query 08:49:09 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 08:49:09 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 08:49:09 Check angles 08:49:09 SkyScan query 08:49:09 SkyScan query done: ret=0 az=135.195<-9013 ze=6.495<-11567 Statuses=0009 0008 08:49:09 Msec=750 True Az=135.195 Ze=6.495 Az status=0009 Ze status=0008 08:49:09 Check angles 08:49:09 SkyScan query 08:49:10 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 08:49:10 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 08:49:10 Check angles 08:49:10 SkyScan query 08:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:49:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:49:11 Message to Master queued w/err=0: serial=45865 error=0 08:49:16 Received message from Master: op=Filter serial=45866 08:49:16 Color wheel filter change from 0 to 0 08:49:16 FLIGetFilterPos err=0 currentPosition=0 08:49:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:16 Filter is already there-color wheel unchanged 08:49:16 Received message from Master: op=Shutter serial=45867 08:49:16 Shutter LASER close 08:49:16 Received message from Camera: op=State serial=45869 08:49:16 GetSingleValue result=40 Value=cccccccc 08:49:16 SkyScan query 08:49:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:49:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:17 Parameters OK 08:49:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:17 Set A/D data flow result=40 08:49:17 Set A/D channel type result=40 08:49:17 Set A/D encoding result=40 08:49:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:17 Set channel filter=0.000000e+000 result=40 08:49:17 Config A/D Result=40 08:49:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:17 Get A/D filter: -9.255963e+061 result=40 08:49:17 Get A/D value=-858993460 result=40 08:49:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:17 Parameters OK 08:49:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:17 Set A/D data flow result=40 08:49:17 Set A/D channel type result=40 08:49:17 Set A/D encoding result=40 08:49:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:17 Set channel filter=0.000000e+000 result=40 08:49:17 Config A/D Result=40 08:49:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:17 Get A/D filter: -9.255963e+061 result=40 08:49:17 Get A/D value=-858993460 result=40 08:49:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:17 Aux= 08:49:17 Message to Camera, serial 45869 queued 08:49:53 Received message from Master: op=PointingHead serial=45882 08:49:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:49:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:49:54 Point started: ret=0 08:49:54 point_skyscan result=0 08:49:55 Check angles 08:49:55 SkyScan query 08:49:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 08:49:55 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 08:49:55 Check angles 08:49:55 SkyScan query 08:49:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 08:49:56 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 08:49:56 Check angles 08:49:56 SkyScan query 08:49:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.88<-16392 Statuses=0008 0009 08:49:57 Msec=1500 True Az=112.995 Ze=-65.88 Az status=0008 Ze status=0009 08:49:57 Check angles 08:49:57 SkyScan query 08:49:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 08:49:57 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 08:49:58 Check angles 08:49:58 SkyScan query 08:49:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.775<-19185 Statuses=0008 0009 08:49:58 Msec=3000 True Az=112.995 Ze=-107.775 Az status=0008 Ze status=0009 08:49:58 Check angles 08:49:58 SkyScan query 08:49:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 08:49:59 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 08:49:59 Check angles 08:49:59 SkyScan query 08:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.67<-21978 Statuses=0008 0009 08:50:00 Msec=4500 True Az=112.995 Ze=-149.67 Az status=0008 Ze status=0009 08:50:00 Check angles 08:50:00 SkyScan query 08:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.94<-23396 Statuses=0008 0009 08:50:00 Msec=5250 True Az=112.995 Ze=-170.94 Az status=0008 Ze status=0009 08:50:01 Check angles 08:50:01 SkyScan query 08:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:50:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:50:01 Message to Master queued w/err=0: serial=45882 error=0 08:50:06 Received message from Master: op=Filter serial=45883 08:50:06 Color wheel filter change from 0 to 0 08:50:06 FLIGetFilterPos err=0 currentPosition=0 08:50:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:06 Filter is already there-color wheel unchanged 08:50:06 Received message from Master: op=Shutter serial=45884 08:50:06 Shutter LASER open 08:50:07 Received message from Camera: op=State serial=45886 08:50:07 GetSingleValue result=40 Value=cccccccc 08:50:07 SkyScan query 08:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:50:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:07 Parameters OK 08:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:07 Set A/D data flow result=40 08:50:07 Set A/D channel type result=40 08:50:07 Set A/D encoding result=40 08:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:07 Set channel filter=0.000000e+000 result=40 08:50:07 Config A/D Result=40 08:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:07 Get A/D filter: -9.255963e+061 result=40 08:50:07 Get A/D value=-858993460 result=40 08:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:07 Parameters OK 08:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:07 Set A/D data flow result=40 08:50:07 Set A/D channel type result=40 08:50:07 Set A/D encoding result=40 08:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:07 Set channel filter=0.000000e+000 result=40 08:50:07 Config A/D Result=40 08:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:07 Get A/D filter: -9.255963e+061 result=40 08:50:07 Get A/D value=-858993460 result=40 08:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:07 Aux= 08:50:07 Message to Camera, serial 45886 queued 08:50:16 Received message from Master: op=Shutter serial=45896 08:50:16 Shutter LASER close 08:50:16 Received message from Master: op=PointingHead serial=45900 08:50:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:50:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:50:16 Point started: ret=0 08:50:16 point_skyscan result=0 08:50:17 Check angles 08:50:17 SkyScan query 08:50:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 08:50:18 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 08:50:18 Check angles 08:50:18 SkyScan query 08:50:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 08:50:18 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 08:50:19 Check angles 08:50:19 SkyScan query 08:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 08:50:19 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 08:50:19 Check angles 08:50:19 SkyScan query 08:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 08:50:20 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 08:50:20 Check angles 08:50:20 SkyScan query 08:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 08:50:21 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 08:50:21 Check angles 08:50:21 SkyScan query 08:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.31<-14554 Statuses=0008 0009 08:50:21 Msec=3750 True Az=112.995 Ze=-38.31 Az status=0008 Ze status=0009 08:50:22 Check angles 08:50:22 SkyScan query 08:50:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.37<-13158 Statuses=0008 0009 08:50:22 Msec=4500 True Az=112.995 Ze=-17.37 Az status=0008 Ze status=0009 08:50:22 Check angles 08:50:22 SkyScan query 08:50:23 SkyScan query done: ret=0 az=112.995<-7533 ze=3.6<-11760 Statuses=0008 0009 08:50:23 Msec=5250 True Az=112.995 Ze=3.6 Az status=0008 Ze status=0009 08:50:23 Check angles 08:50:23 SkyScan query 08:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:50:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:50:24 Message to Master queued w/err=0: serial=45900 error=0 08:50:29 Received message from Master: op=Filter serial=45901 08:50:29 Color wheel filter change from 0 to 0 08:50:29 FLIGetFilterPos err=0 currentPosition=0 08:50:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:29 Filter is already there-color wheel unchanged 08:50:29 Received message from Master: op=Shutter serial=45902 08:50:29 Shutter LASER close 08:50:29 Received message from Camera: op=State serial=45904 08:50:29 GetSingleValue result=40 Value=cccccccc 08:50:29 SkyScan query 08:50:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:30 Parameters OK 08:50:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:30 Set A/D data flow result=40 08:50:30 Set A/D channel type result=40 08:50:30 Set A/D encoding result=40 08:50:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:30 Set channel filter=0.000000e+000 result=40 08:50:30 Config A/D Result=40 08:50:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:30 Get A/D filter: -9.255963e+061 result=40 08:50:30 Get A/D value=-858993460 result=40 08:50:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:30 Parameters OK 08:50:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:30 Set A/D data flow result=40 08:50:30 Set A/D channel type result=40 08:50:30 Set A/D encoding result=40 08:50:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:30 Set channel filter=0.000000e+000 result=40 08:50:30 Config A/D Result=40 08:50:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:30 Get A/D filter: -9.255963e+061 result=40 08:50:30 Get A/D value=-858993460 result=40 08:50:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:30 Aux= 08:50:30 Message to Camera, serial 45904 queued 08:51:06 Received message from Master: op=PointingHead serial=45917 08:51:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:51:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:51:07 Point started: ret=0 08:51:07 point_skyscan result=0 08:51:08 Check angles 08:51:08 SkyScan query 08:51:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:51:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:51:08 Message to Master queued w/err=0: serial=45917 error=0 08:51:13 Received message from Master: op=Filter serial=45918 08:51:13 Color wheel filter change from 0 to 0 08:51:13 FLIGetFilterPos err=0 currentPosition=0 08:51:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:13 Filter is already there-color wheel unchanged 08:51:13 Received message from Master: op=Shutter serial=45919 08:51:13 Shutter LASER close 08:51:13 Received message from Camera: op=State serial=45921 08:51:13 GetSingleValue result=40 Value=cccccccc 08:51:13 SkyScan query 08:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:51:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:14 Parameters OK 08:51:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:14 Set A/D data flow result=40 08:51:14 Set A/D channel type result=40 08:51:14 Set A/D encoding result=40 08:51:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:14 Set channel filter=0.000000e+000 result=40 08:51:14 Config A/D Result=40 08:51:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:14 Get A/D filter: -9.255963e+061 result=40 08:51:14 Get A/D value=-858993460 result=40 08:51:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:14 Parameters OK 08:51:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:14 Set A/D data flow result=40 08:51:14 Set A/D channel type result=40 08:51:14 Set A/D encoding result=40 08:51:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:14 Set channel filter=0.000000e+000 result=40 08:51:14 Config A/D Result=40 08:51:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:14 Get A/D filter: -9.255963e+061 result=40 08:51:14 Get A/D value=-858993460 result=40 08:51:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:14 Aux= 08:51:14 Message to Camera, serial 45921 queued 08:51:51 Received message from Master: op=PointingHead serial=45934 08:51:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:51:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:51:51 Point started: ret=0 08:51:51 point_skyscan result=0 08:51:52 Check angles 08:51:52 SkyScan query 08:51:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:51:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:51:52 Message to Master queued w/err=0: serial=45934 error=0 08:51:57 Received message from Master: op=Filter serial=45935 08:51:57 Color wheel filter change from 0 to 0 08:51:57 FLIGetFilterPos err=0 currentPosition=0 08:51:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:57 Filter is already there-color wheel unchanged 08:51:58 Received message from Master: op=Shutter serial=45936 08:51:58 Shutter LASER close 08:51:58 Received message from Camera: op=State serial=45938 08:51:58 GetSingleValue result=40 Value=cccccccc 08:51:58 SkyScan query 08:51:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:51:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:58 Parameters OK 08:51:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:58 Set A/D data flow result=40 08:51:58 Set A/D channel type result=40 08:51:58 Set A/D encoding result=40 08:51:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:58 Set channel filter=0.000000e+000 result=40 08:51:58 Config A/D Result=40 08:51:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:58 Get A/D filter: -9.255963e+061 result=40 08:51:58 Get A/D value=-858993460 result=40 08:51:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:58 Parameters OK 08:51:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:58 Set A/D data flow result=40 08:51:58 Set A/D channel type result=40 08:51:58 Set A/D encoding result=40 08:51:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:58 Set channel filter=0.000000e+000 result=40 08:51:58 Config A/D Result=40 08:51:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:58 Get A/D filter: -9.255963e+061 result=40 08:51:58 Get A/D value=-858993460 result=40 08:51:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:58 Aux= 08:51:58 Message to Camera, serial 45938 queued 08:52:35 Received message from Master: op=PointingHead serial=45951 08:52:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:52:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:52:35 Point started: ret=0 08:52:35 point_skyscan result=0 08:52:36 Check angles 08:52:36 SkyScan query 08:52:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:52:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:52:37 Message to Master queued w/err=0: serial=45951 error=0 08:52:42 Received message from Master: op=Filter serial=45952 08:52:42 Color wheel filter change from 0 to 0 08:52:42 FLIGetFilterPos err=0 currentPosition=0 08:52:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:42 Filter is already there-color wheel unchanged 08:52:42 Received message from Master: op=Shutter serial=45953 08:52:42 Shutter LASER close 08:52:42 Received message from Camera: op=State serial=45955 08:52:42 GetSingleValue result=40 Value=cccccccc 08:52:42 SkyScan query 08:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:52:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:42 Parameters OK 08:52:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:42 Set A/D data flow result=40 08:52:42 Set A/D channel type result=40 08:52:42 Set A/D encoding result=40 08:52:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:42 Set channel filter=0.000000e+000 result=40 08:52:42 Config A/D Result=40 08:52:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:42 Get A/D filter: -9.255963e+061 result=40 08:52:42 Get A/D value=-858993460 result=40 08:52:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:42 Parameters OK 08:52:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:42 Set A/D data flow result=40 08:52:42 Set A/D channel type result=40 08:52:42 Set A/D encoding result=40 08:52:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:42 Set channel filter=0.000000e+000 result=40 08:52:42 Config A/D Result=40 08:52:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:42 Get A/D filter: -9.255963e+061 result=40 08:52:42 Get A/D value=-858993460 result=40 08:52:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:42 Aux= 08:52:42 Message to Camera, serial 45955 queued 08:53:19 Received message from Master: op=PointingHead serial=45968 08:53:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:53:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:53:20 Point started: ret=0 08:53:20 point_skyscan result=0 08:53:20 Check angles 08:53:20 SkyScan query 08:53:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.4<-13560 Statuses=0008 0009 08:53:21 Msec=0 True Az=112.995 Ze=-23.4 Az status=0008 Ze status=0009 08:53:21 Check angles 08:53:21 SkyScan query 08:53:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 08:53:22 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 08:53:22 Check angles 08:53:22 SkyScan query 08:53:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 08:53:22 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 08:53:23 Check angles 08:53:23 SkyScan query 08:53:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.28<-17752 Statuses=0008 0009 08:53:23 Msec=2250 True Az=112.995 Ze=-86.28 Az status=0008 Ze status=0009 08:53:23 Check angles 08:53:23 SkyScan query 08:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.22<-19148 Statuses=0008 0009 08:53:24 Msec=3000 True Az=112.995 Ze=-107.22 Az status=0008 Ze status=0009 08:53:24 Check angles 08:53:24 SkyScan query 08:53:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.175<-20545 Statuses=0008 0009 08:53:25 Msec=3750 True Az=112.995 Ze=-128.175 Az status=0008 Ze status=0009 08:53:25 Check angles 08:53:25 SkyScan query 08:53:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.565<-21971 Statuses=0008 0009 08:53:25 Msec=4500 True Az=112.995 Ze=-149.565 Az status=0008 Ze status=0009 08:53:26 Check angles 08:53:26 SkyScan query 08:53:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.49<-23366 Statuses=0008 0009 08:53:26 Msec=5250 True Az=112.995 Ze=-170.49 Az status=0008 Ze status=0009 08:53:26 Check angles 08:53:26 SkyScan query 08:53:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:53:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:53:27 Message to Master queued w/err=0: serial=45968 error=0 08:53:32 Received message from Master: op=Filter serial=45969 08:53:32 Color wheel filter change from 0 to 0 08:53:32 FLIGetFilterPos err=0 currentPosition=0 08:53:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:32 Filter is already there-color wheel unchanged 08:53:32 Received message from Master: op=Shutter serial=45970 08:53:32 Shutter LASER open 08:53:32 Received message from Camera: op=State serial=45972 08:53:32 GetSingleValue result=40 Value=cccccccc 08:53:32 SkyScan query 08:53:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:53:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:33 Parameters OK 08:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:33 Set A/D data flow result=40 08:53:33 Set A/D channel type result=40 08:53:33 Set A/D encoding result=40 08:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:33 Set channel filter=0.000000e+000 result=40 08:53:33 Config A/D Result=40 08:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:33 Get A/D filter: -9.255963e+061 result=40 08:53:33 Get A/D value=-858993460 result=40 08:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:33 Parameters OK 08:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:33 Set A/D data flow result=40 08:53:33 Set A/D channel type result=40 08:53:33 Set A/D encoding result=40 08:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:33 Set channel filter=0.000000e+000 result=40 08:53:33 Config A/D Result=40 08:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:33 Get A/D filter: -9.255963e+061 result=40 08:53:33 Get A/D value=-858993460 result=40 08:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:33 Aux= 08:53:33 Message to Camera, serial 45972 queued 08:53:41 Received message from Master: op=Shutter serial=45982 08:53:41 Shutter LASER close 08:53:42 Received message from Master: op=PointingHead serial=45986 08:53:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:53:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:53:42 Point started: ret=0 08:53:42 point_skyscan result=0 08:53:43 Check angles 08:53:43 SkyScan query 08:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 08:53:44 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 08:53:44 Check angles 08:53:44 SkyScan query 08:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 08:53:44 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 08:53:45 Check angles 08:53:45 SkyScan query 08:53:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 08:53:45 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 08:53:45 Check angles 08:53:45 SkyScan query 08:53:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 08:53:46 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 08:53:46 Check angles 08:53:46 SkyScan query 08:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.52<-15968 Statuses=0008 0009 08:53:47 Msec=3000 True Az=112.995 Ze=-59.52 Az status=0008 Ze status=0009 08:53:47 Check angles 08:53:47 SkyScan query 08:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.55<-14570 Statuses=0008 0009 08:53:47 Msec=3750 True Az=112.995 Ze=-38.55 Az status=0008 Ze status=0009 08:53:48 Check angles 08:53:48 SkyScan query 08:53:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.61<-13174 Statuses=0008 0009 08:53:48 Msec=4500 True Az=112.995 Ze=-17.61 Az status=0008 Ze status=0009 08:53:48 Check angles 08:53:48 SkyScan query 08:53:49 SkyScan query done: ret=0 az=112.995<-7533 ze=3.36<-11776 Statuses=0008 0009 08:53:49 Msec=5250 True Az=112.995 Ze=3.36 Az status=0008 Ze status=0009 08:53:49 Check angles 08:53:49 SkyScan query 08:53:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:53:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:53:50 Message to Master queued w/err=0: serial=45986 error=0 08:53:55 Received message from Master: op=Filter serial=45987 08:53:55 Color wheel filter change from 0 to 0 08:53:55 FLIGetFilterPos err=0 currentPosition=0 08:53:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:55 Filter is already there-color wheel unchanged 08:53:55 Received message from Master: op=Shutter serial=45988 08:53:55 Shutter LASER close 08:53:55 Received message from Camera: op=State serial=45990 08:53:55 GetSingleValue result=40 Value=cccccccc 08:53:55 SkyScan query 08:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:53:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:56 Parameters OK 08:53:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:56 Set A/D data flow result=40 08:53:56 Set A/D channel type result=40 08:53:56 Set A/D encoding result=40 08:53:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:56 Set channel filter=0.000000e+000 result=40 08:53:56 Config A/D Result=40 08:53:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:56 Get A/D filter: -9.255963e+061 result=40 08:53:56 Get A/D value=-858993460 result=40 08:53:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:56 Parameters OK 08:53:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:56 Set A/D data flow result=40 08:53:56 Set A/D channel type result=40 08:53:56 Set A/D encoding result=40 08:53:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:56 Set channel filter=0.000000e+000 result=40 08:53:56 Config A/D Result=40 08:53:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:56 Get A/D filter: -9.255963e+061 result=40 08:53:56 Get A/D value=-858993460 result=40 08:53:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:56 Aux= 08:53:56 Message to Camera, serial 45990 queued 08:54:32 Received message from Master: op=PointingHead serial=46003 08:54:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:54:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:54:33 Point started: ret=0 08:54:33 point_skyscan result=0 08:54:34 Check angles 08:54:34 SkyScan query 08:54:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:54:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:54:34 Message to Master queued w/err=0: serial=46003 error=0 08:54:39 Received message from Master: op=Filter serial=46004 08:54:39 Color wheel filter change from 0 to 0 [UTC 2019-3-1 08:54:39] 08:54:39 FLIGetFilterPos err=0 currentPosition=0 08:54:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:39 Filter is already there-color wheel unchanged 08:54:39 Received message from Master: op=Shutter serial=46005 08:54:39 Shutter LASER close 08:54:39 Received message from Camera: op=State serial=46007 08:54:39 GetSingleValue result=40 Value=cccccccc 08:54:39 SkyScan query 08:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:54:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:40 Parameters OK 08:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:40 Set A/D data flow result=40 08:54:40 Set A/D channel type result=40 08:54:40 Set A/D encoding result=40 08:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:40 Set channel filter=0.000000e+000 result=40 08:54:40 Config A/D Result=40 08:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:40 Get A/D filter: -9.255963e+061 result=40 08:54:40 Get A/D value=-858993460 result=40 08:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:40 Parameters OK 08:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:40 Set A/D data flow result=40 08:54:40 Set A/D channel type result=40 08:54:40 Set A/D encoding result=40 08:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:40 Set channel filter=0.000000e+000 result=40 08:54:40 Config A/D Result=40 08:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:40 Get A/D filter: -9.255963e+061 result=40 08:54:40 Get A/D value=-858993460 result=40 08:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:40 Aux= 08:54:40 Message to Camera, serial 46007 queued 08:55:17 Received message from Master: op=PointingHead serial=46020 08:55:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:55:17 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:55:17 Point started: ret=0 08:55:17 point_skyscan result=0 08:55:18 Check angles 08:55:18 SkyScan query 08:55:18 SkyScan query done: ret=0 az=136.14<-9076 ze=-6.51<-12434 Statuses=0009 0008 08:55:18 Msec=0 True Az=136.14 Ze=-6.51 Az status=0009 Ze status=0008 08:55:19 Check angles 08:55:19 SkyScan query 08:55:19 SkyScan query done: ret=0 az=154.02<-10268 ze=-6.495<-12433 Statuses=0009 0008 08:55:19 Msec=750 True Az=154.02 Ze=-6.495 Az status=0009 Ze status=0008 08:55:19 Check angles 08:55:19 SkyScan query 08:55:20 SkyScan query done: ret=0 az=171.51<-11434 ze=-6.495<-12433 Statuses=0009 0008 08:55:20 Msec=1500 True Az=171.51 Ze=-6.495 Az status=0009 Ze status=0008 08:55:20 Check angles 08:55:20 SkyScan query 08:55:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:55:21 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:55:21 Message to Master queued w/err=0: serial=46020 error=0 08:55:26 Received message from Master: op=Filter serial=46021 08:55:26 Color wheel filter change from 0 to 0 08:55:26 FLIGetFilterPos err=0 currentPosition=0 08:55:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:26 Filter is already there-color wheel unchanged 08:55:26 Received message from Master: op=Shutter serial=46022 08:55:26 Shutter LASER close 08:55:26 Received message from Camera: op=State serial=46024 08:55:26 GetSingleValue result=40 Value=cccccccc 08:55:26 SkyScan query 08:55:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:55:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:27 Parameters OK 08:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:27 Set A/D data flow result=40 08:55:27 Set A/D channel type result=40 08:55:27 Set A/D encoding result=40 08:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:27 Set channel filter=0.000000e+000 result=40 08:55:27 Config A/D Result=40 08:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:27 Get A/D filter: -9.255963e+061 result=40 08:55:27 Get A/D value=-858993460 result=40 08:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:27 Parameters OK 08:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:27 Set A/D data flow result=40 08:55:27 Set A/D channel type result=40 08:55:27 Set A/D encoding result=40 08:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:27 Set channel filter=0.000000e+000 result=40 08:55:27 Config A/D Result=40 08:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:27 Get A/D filter: -9.255963e+061 result=40 08:55:27 Get A/D value=-858993460 result=40 08:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:27 Aux= 08:55:27 Message to Camera, serial 46024 queued 08:56:03 Received message from Master: op=PointingHead serial=46037 08:56:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:56:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:56:04 Point started: ret=0 08:56:04 point_skyscan result=0 08:56:04 Check angles 08:56:04 SkyScan query 08:56:05 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 08:56:05 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 08:56:05 Check angles 08:56:05 SkyScan query 08:56:06 SkyScan query done: ret=0 az=135.45<-9030 ze=6.495<-11567 Statuses=0009 0008 08:56:06 Msec=750 True Az=135.45 Ze=6.495 Az status=0009 Ze status=0008 08:56:06 Check angles 08:56:06 SkyScan query 08:56:07 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 08:56:07 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 08:56:07 Check angles 08:56:07 SkyScan query 08:56:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:56:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:56:07 Message to Master queued w/err=0: serial=46037 error=0 08:56:12 Received message from Master: op=Filter serial=46038 08:56:12 Color wheel filter change from 0 to 0 08:56:12 FLIGetFilterPos err=0 currentPosition=0 08:56:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:12 Filter is already there-color wheel unchanged 08:56:12 Received message from Master: op=Shutter serial=46039 08:56:12 Shutter LASER close 08:56:13 Received message from Camera: op=State serial=46041 08:56:13 GetSingleValue result=40 Value=cccccccc 08:56:13 SkyScan query 08:56:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:56:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:13 Parameters OK 08:56:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:13 Set A/D data flow result=40 08:56:13 Set A/D channel type result=40 08:56:13 Set A/D encoding result=40 08:56:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:13 Set channel filter=0.000000e+000 result=40 08:56:13 Config A/D Result=40 08:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:13 Get A/D filter: -9.255963e+061 result=40 08:56:13 Get A/D value=-858993460 result=40 08:56:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:13 Parameters OK 08:56:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:13 Set A/D data flow result=40 08:56:13 Set A/D channel type result=40 08:56:13 Set A/D encoding result=40 08:56:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:13 Set channel filter=0.000000e+000 result=40 08:56:13 Config A/D Result=40 08:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:13 Get A/D filter: -9.255963e+061 result=40 08:56:13 Get A/D value=-858993460 result=40 08:56:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:13 Aux= 08:56:13 Message to Camera, serial 46041 queued 08:56:50 Received message from Master: op=PointingHead serial=46054 08:56:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:56:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:56:50 Point started: ret=0 08:56:50 point_skyscan result=0 08:56:51 Check angles 08:56:51 SkyScan query 08:56:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 08:56:52 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 08:56:52 Check angles 08:56:52 SkyScan query 08:56:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 08:56:52 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 08:56:52 Check angles 08:56:52 SkyScan query 08:56:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.145<-16343 Statuses=0008 0009 08:56:53 Msec=1500 True Az=112.995 Ze=-65.145 Az status=0008 Ze status=0009 08:56:53 Check angles 08:56:53 SkyScan query 08:56:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.115<-17741 Statuses=0008 0009 08:56:54 Msec=2250 True Az=112.995 Ze=-86.115 Az status=0008 Ze status=0009 08:56:54 Check angles 08:56:54 SkyScan query 08:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.04<-19136 Statuses=0008 0009 08:56:55 Msec=3000 True Az=112.995 Ze=-107.04 Az status=0008 Ze status=0009 08:56:55 Check angles 08:56:55 SkyScan query 08:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.01<-20534 Statuses=0008 0009 08:56:55 Msec=3750 True Az=112.995 Ze=-128.01 Az status=0008 Ze status=0009 08:56:55 Check angles 08:56:55 SkyScan query 08:56:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.965<-21931 Statuses=0008 0009 08:56:56 Msec=4500 True Az=112.995 Ze=-148.965 Az status=0008 Ze status=0009 08:56:56 Check angles 08:56:56 SkyScan query 08:56:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.905<-23327 Statuses=0008 0009 08:56:57 Msec=5250 True Az=112.995 Ze=-169.905 Az status=0008 Ze status=0009 08:56:57 Check angles 08:56:57 SkyScan query 08:56:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:56:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:56:58 Message to Master queued w/err=0: serial=46054 error=0 08:57:03 Received message from Master: op=Filter serial=46055 08:57:03 Color wheel filter change from 0 to 0 08:57:03 FLIGetFilterPos err=0 currentPosition=0 08:57:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:03 Filter is already there-color wheel unchanged 08:57:03 Received message from Master: op=Shutter serial=46056 08:57:03 Shutter LASER open 08:57:03 Received message from Camera: op=State serial=46058 08:57:03 GetSingleValue result=40 Value=cccccccc 08:57:03 SkyScan query 08:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:57:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:03 Parameters OK 08:57:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:03 Set A/D data flow result=40 08:57:03 Set A/D channel type result=40 08:57:03 Set A/D encoding result=40 08:57:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:03 Set channel filter=0.000000e+000 result=40 08:57:03 Config A/D Result=40 08:57:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:03 Get A/D filter: -9.255963e+061 result=40 08:57:03 Get A/D value=-858993460 result=40 08:57:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:03 Parameters OK 08:57:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:03 Set A/D data flow result=40 08:57:03 Set A/D channel type result=40 08:57:03 Set A/D encoding result=40 08:57:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:03 Set channel filter=0.000000e+000 result=40 08:57:03 Config A/D Result=40 08:57:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:03 Get A/D filter: -9.255963e+061 result=40 08:57:03 Get A/D value=-858993460 result=40 08:57:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:03 Aux= 08:57:03 Message to Camera, serial 46058 queued 08:57:12 Received message from Master: op=Shutter serial=46068 08:57:12 Shutter LASER close 08:57:12 Received message from Master: op=PointingHead serial=46072 08:57:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:57:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:57:13 Point started: ret=0 08:57:13 point_skyscan result=0 08:57:13 Check angles 08:57:13 SkyScan query 08:57:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 08:57:14 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 08:57:14 Check angles 08:57:14 SkyScan query 08:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 08:57:15 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 08:57:15 Check angles 08:57:15 SkyScan query 08:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 08:57:16 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 08:57:16 Check angles 08:57:16 SkyScan query 08:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.325<-17355 Statuses=0008 0009 08:57:16 Msec=2250 True Az=112.995 Ze=-80.325 Az status=0008 Ze status=0009 08:57:16 Check angles 08:57:16 SkyScan query 08:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.385<-15959 Statuses=0008 0009 08:57:17 Msec=3000 True Az=112.995 Ze=-59.385 Az status=0008 Ze status=0009 08:57:17 Check angles 08:57:17 SkyScan query 08:57:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.415<-14561 Statuses=0008 0009 08:57:18 Msec=3750 True Az=112.995 Ze=-38.415 Az status=0008 Ze status=0009 08:57:18 Check angles 08:57:18 SkyScan query 08:57:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.475<-13165 Statuses=0008 0009 08:57:19 Msec=4500 True Az=112.995 Ze=-17.475 Az status=0008 Ze status=0009 08:57:19 Check angles 08:57:19 SkyScan query 08:57:19 SkyScan query done: ret=0 az=112.995<-7533 ze=3.48<-11768 Statuses=0008 0009 08:57:19 Msec=5250 True Az=112.995 Ze=3.48 Az status=0008 Ze status=0009 08:57:19 Check angles 08:57:19 SkyScan query 08:57:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:57:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:57:20 Message to Master queued w/err=0: serial=46072 error=0 08:57:25 Received message from Master: op=Filter serial=46073 08:57:25 Color wheel filter change from 0 to 0 08:57:25 FLIGetFilterPos err=0 currentPosition=0 08:57:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:25 Filter is already there-color wheel unchanged 08:57:25 Received message from Master: op=Shutter serial=46074 08:57:25 Shutter LASER close 08:57:25 Received message from Camera: op=State serial=46076 08:57:25 GetSingleValue result=40 Value=cccccccc 08:57:25 SkyScan query 08:57:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:26 Parameters OK 08:57:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:26 Set A/D data flow result=40 08:57:26 Set A/D channel type result=40 08:57:26 Set A/D encoding result=40 08:57:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:26 Set channel filter=0.000000e+000 result=40 08:57:26 Config A/D Result=40 08:57:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:26 Get A/D filter: -9.255963e+061 result=40 08:57:26 Get A/D value=-858993460 result=40 08:57:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:26 Parameters OK 08:57:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:26 Set A/D data flow result=40 08:57:26 Set A/D channel type result=40 08:57:26 Set A/D encoding result=40 08:57:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:26 Set channel filter=0.000000e+000 result=40 08:57:26 Config A/D Result=40 08:57:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:26 Get A/D filter: -9.255963e+061 result=40 08:57:26 Get A/D value=-858993460 result=40 08:57:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:26 Aux= 08:57:26 Message to Camera, serial 46076 queued 08:58:03 Received message from Master: op=PointingHead serial=46089 08:58:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:58:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:58:03 Point started: ret=0 08:58:03 point_skyscan result=0 08:58:04 Check angles 08:58:04 SkyScan query 08:58:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:58:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:58:04 Message to Master queued w/err=0: serial=46089 error=0 08:58:09 Received message from Master: op=Filter serial=46090 08:58:09 Color wheel filter change from 0 to 0 08:58:09 FLIGetFilterPos err=0 currentPosition=0 08:58:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:09 Filter is already there-color wheel unchanged 08:58:10 Received message from Master: op=Shutter serial=46091 08:58:10 Shutter LASER close 08:58:10 Received message from Camera: op=State serial=46093 08:58:10 GetSingleValue result=40 Value=cccccccc 08:58:10 SkyScan query 08:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:58:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:10 Parameters OK 08:58:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:10 Set A/D data flow result=40 08:58:10 Set A/D channel type result=40 08:58:10 Set A/D encoding result=40 08:58:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:10 Set channel filter=0.000000e+000 result=40 08:58:10 Config A/D Result=40 08:58:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:10 Get A/D filter: -9.255963e+061 result=40 08:58:10 Get A/D value=-858993460 result=40 08:58:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:10 Parameters OK 08:58:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:10 Set A/D data flow result=40 08:58:10 Set A/D channel type result=40 08:58:10 Set A/D encoding result=40 08:58:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:10 Set channel filter=0.000000e+000 result=40 08:58:10 Config A/D Result=40 08:58:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:10 Get A/D filter: -9.255963e+061 result=40 08:58:10 Get A/D value=-858993460 result=40 08:58:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:10 Aux= 08:58:10 Message to Camera, serial 46093 queued 08:58:46 Received message from Master: op=PointingHead serial=46105 08:58:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:58:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:58:46 Point started: ret=0 08:58:46 point_skyscan result=0 08:58:47 Check angles 08:58:47 SkyScan query 08:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:58:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:58:48 Message to Master queued w/err=0: serial=46105 error=0 08:58:53 Received message from Master: op=Filter serial=46106 08:58:53 Color wheel filter change from 0 to 0 08:58:53 FLIGetFilterPos err=0 currentPosition=0 08:58:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:53 Filter is already there-color wheel unchanged 08:58:53 Received message from Master: op=Shutter serial=46107 08:58:53 Shutter LASER close 08:58:53 Received message from Camera: op=State serial=46109 08:58:53 GetSingleValue result=40 Value=cccccccc 08:58:53 SkyScan query 08:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:58:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:54 Parameters OK 08:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:54 Set A/D data flow result=40 08:58:54 Set A/D channel type result=40 08:58:54 Set A/D encoding result=40 08:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:54 Set channel filter=0.000000e+000 result=40 08:58:54 Config A/D Result=40 08:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:54 Get A/D filter: -9.255963e+061 result=40 08:58:54 Get A/D value=-858993460 result=40 08:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:54 Parameters OK 08:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:54 Set A/D data flow result=40 08:58:54 Set A/D channel type result=40 08:58:54 Set A/D encoding result=40 08:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:54 Set channel filter=0.000000e+000 result=40 08:58:54 Config A/D Result=40 08:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:54 Get A/D filter: -9.255963e+061 result=40 08:58:54 Get A/D value=-858993460 result=40 08:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:54 Aux= 08:58:54 Message to Camera, serial 46109 queued 08:59:30 Received message from Master: op=PointingHead serial=46121 08:59:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:59:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:59:30 Point started: ret=0 08:59:30 point_skyscan result=0 08:59:31 Check angles 08:59:31 SkyScan query 08:59:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:59:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:59:31 Message to Master queued w/err=0: serial=46121 error=0 08:59:36 Received message from Master: op=Filter serial=46122 08:59:36 Color wheel filter change from 0 to 0 08:59:36 FLIGetFilterPos err=0 currentPosition=0 08:59:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:36 Filter is already there-color wheel unchanged 08:59:36 Received message from Master: op=Shutter serial=46123 08:59:36 Shutter LASER close 08:59:36 Received message from Camera: op=State serial=46125 08:59:36 GetSingleValue result=40 Value=cccccccc 08:59:36 SkyScan query 08:59:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:59:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:37 Parameters OK 08:59:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:37 Set A/D data flow result=40 08:59:37 Set A/D channel type result=40 08:59:37 Set A/D encoding result=40 08:59:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:37 Set channel filter=0.000000e+000 result=40 08:59:37 Config A/D Result=40 08:59:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:37 Get A/D filter: -9.255963e+061 result=40 08:59:37 Get A/D value=-858993460 result=40 08:59:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:37 Parameters OK 08:59:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:37 Set A/D data flow result=40 08:59:37 Set A/D channel type result=40 08:59:37 Set A/D encoding result=40 08:59:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:37 Set channel filter=0.000000e+000 result=40 08:59:37 Config A/D Result=40 08:59:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:37 Get A/D filter: -9.255963e+061 result=40 08:59:37 Get A/D value=-858993460 result=40 08:59:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:37 Aux= 08:59:37 Message to Camera, serial 46125 queued 09:00:14 Received message from Master: op=PointingHead serial=46138 09:00:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:00:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:00:14 Point started: ret=0 09:00:14 point_skyscan result=0 09:00:15 Check angles 09:00:15 SkyScan query 09:00:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 09:00:15 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 09:00:16 Check angles 09:00:16 SkyScan query 09:00:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.965<-14931 Statuses=0008 0009 09:00:16 Msec=750 True Az=112.995 Ze=-43.965 Az status=0008 Ze status=0009 09:00:16 Check angles 09:00:16 SkyScan query 09:00:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.935<-16329 Statuses=0008 0009 09:00:17 Msec=1500 True Az=112.995 Ze=-64.935 Az status=0008 Ze status=0009 09:00:17 Check angles 09:00:17 SkyScan query 09:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.89<-17726 Statuses=0008 0009 09:00:18 Msec=2250 True Az=112.995 Ze=-85.89 Az status=0008 Ze status=0009 09:00:18 Check angles 09:00:18 SkyScan query 09:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.83<-19122 Statuses=0008 0009 09:00:18 Msec=3000 True Az=112.995 Ze=-106.83 Az status=0008 Ze status=0009 09:00:19 Check angles 09:00:19 SkyScan query 09:00:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.8<-20520 Statuses=0008 0009 09:00:19 Msec=3750 True Az=112.995 Ze=-127.8 Az status=0008 Ze status=0009 09:00:19 Check angles 09:00:19 SkyScan query 09:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.74<-21916 Statuses=0008 0009 09:00:20 Msec=4500 True Az=112.995 Ze=-148.74 Az status=0008 Ze status=0009 09:00:20 Check angles 09:00:20 SkyScan query 09:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.695<-23313 Statuses=0008 0009 09:00:21 Msec=5250 True Az=112.995 Ze=-169.695 Az status=0008 Ze status=0009 09:00:21 Check angles 09:00:21 SkyScan query 09:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:00:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:00:21 Message to Master queued w/err=0: serial=46138 error=0 09:00:26 Received message from Master: op=Filter serial=46139 09:00:26 Color wheel filter change from 0 to 0 09:00:26 FLIGetFilterPos err=0 currentPosition=0 09:00:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:26 Filter is already there-color wheel unchanged 09:00:27 Received message from Master: op=Shutter serial=46140 09:00:27 Shutter LASER open 09:00:27 Received message from Camera: op=State serial=46142 09:00:27 GetSingleValue result=40 Value=cccccccc 09:00:27 SkyScan query 09:00:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:00:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:27 Parameters OK 09:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:27 Set A/D data flow result=40 09:00:27 Set A/D channel type result=40 09:00:27 Set A/D encoding result=40 09:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:27 Set channel filter=0.000000e+000 result=40 09:00:27 Config A/D Result=40 09:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:27 Get A/D filter: -9.255963e+061 result=40 09:00:27 Get A/D value=-858993460 result=40 09:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:27 Parameters OK 09:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:27 Set A/D data flow result=40 09:00:27 Set A/D channel type result=40 09:00:27 Set A/D encoding result=40 09:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:27 Set channel filter=0.000000e+000 result=40 09:00:27 Config A/D Result=40 09:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:27 Get A/D filter: -9.255963e+061 result=40 09:00:27 Get A/D value=-858993460 result=40 09:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:27 Aux= 09:00:27 Message to Camera, serial 46142 queued 09:00:36 Received message from Master: op=Shutter serial=46152 09:00:36 Shutter LASER close 09:00:36 Received message from Master: op=PointingHead serial=46156 09:00:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:00:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:00:37 Point started: ret=0 09:00:37 point_skyscan result=0 09:00:37 Check angles 09:00:37 SkyScan query 09:00:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 09:00:38 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 09:00:38 Check angles 09:00:38 SkyScan query 09:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 09:00:39 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 09:00:39 Check angles 09:00:39 SkyScan query 09:00:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 09:00:40 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 09:00:40 Check angles 09:00:40 SkyScan query 09:00:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.92<-17328 Statuses=0008 0009 09:00:40 Msec=2250 True Az=112.995 Ze=-79.92 Az status=0008 Ze status=0009 09:00:40 Check angles 09:00:40 SkyScan query 09:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.965<-15931 Statuses=0008 0009 09:00:41 Msec=3000 True Az=112.995 Ze=-58.965 Az status=0008 Ze status=0009 09:00:41 Check angles 09:00:41 SkyScan query 09:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.995<-14533 Statuses=0008 0009 09:00:42 Msec=3750 True Az=112.995 Ze=-37.995 Az status=0008 Ze status=0009 09:00:42 Check angles 09:00:42 SkyScan query 09:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.04<-13136 Statuses=0008 0009 09:00:43 Msec=4500 True Az=112.995 Ze=-17.04 Az status=0008 Ze status=0009 09:00:43 Check angles 09:00:43 SkyScan query 09:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=3.9<-11740 Statuses=0008 0009 09:00:43 Msec=5250 True Az=112.995 Ze=3.9 Az status=0008 Ze status=0009 09:00:43 Check angles 09:00:43 SkyScan query 09:00:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:00:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:00:44 Message to Master queued w/err=0: serial=46156 error=0 09:00:49 Received message from Master: op=Filter serial=46157 09:00:49 Color wheel filter change from 0 to 0 09:00:49 FLIGetFilterPos err=0 currentPosition=0 09:00:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:49 Filter is already there-color wheel unchanged 09:00:49 Received message from Master: op=Shutter serial=46158 09:00:49 Shutter LASER close 09:00:49 Received message from Camera: op=State serial=46160 09:00:49 GetSingleValue result=40 Value=cccccccc 09:00:49 SkyScan query 09:00:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:00:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:50 Parameters OK 09:00:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:50 Set A/D data flow result=40 09:00:50 Set A/D channel type result=40 09:00:50 Set A/D encoding result=40 09:00:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:50 Set channel filter=0.000000e+000 result=40 09:00:50 Config A/D Result=40 09:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:50 Get A/D filter: -9.255963e+061 result=40 09:00:50 Get A/D value=-858993460 result=40 09:00:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:50 Parameters OK 09:00:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:50 Set A/D data flow result=40 09:00:50 Set A/D channel type result=40 09:00:50 Set A/D encoding result=40 09:00:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:50 Set channel filter=0.000000e+000 result=40 09:00:50 Config A/D Result=40 09:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:50 Get A/D filter: -9.255963e+061 result=40 09:00:50 Get A/D value=-858993460 result=40 09:00:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:50 Aux= 09:00:50 Message to Camera, serial 46160 queued 09:01:27 Received message from Master: op=PointingHead serial=46173 09:01:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:01:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:01:27 Point started: ret=0 09:01:27 point_skyscan result=0 09:01:28 Check angles 09:01:28 SkyScan query 09:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:01:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:01:28 Message to Master queued w/err=0: serial=46173 error=0 09:01:33 Received message from Master: op=Filter serial=46174 09:01:33 Color wheel filter change from 0 to 0 09:01:33 FLIGetFilterPos err=0 currentPosition=0 09:01:33 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:33 Filter is already there-color wheel unchanged 09:01:34 Received message from Master: op=Shutter serial=46175 09:01:34 Shutter LASER close 09:01:34 Received message from Camera: op=State serial=46177 09:01:34 GetSingleValue result=40 Value=cccccccc 09:01:34 SkyScan query 09:01:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:01:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:34 Parameters OK 09:01:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:34 Set A/D data flow result=40 09:01:34 Set A/D channel type result=40 09:01:34 Set A/D encoding result=40 09:01:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:34 Set channel filter=0.000000e+000 result=40 09:01:34 Config A/D Result=40 09:01:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:34 Get A/D filter: -9.255963e+061 result=40 09:01:34 Get A/D value=-858993460 result=40 09:01:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:34 Parameters OK 09:01:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:34 Set A/D data flow result=40 09:01:34 Set A/D channel type result=40 09:01:34 Set A/D encoding result=40 09:01:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:34 Set channel filter=0.000000e+000 result=40 09:01:34 Config A/D Result=40 09:01:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:34 Get A/D filter: -9.255963e+061 result=40 09:01:34 Get A/D value=-858993460 result=40 09:01:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:01:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:01:34 Aux= 09:01:34 Message to Camera, serial 46177 queued 09:02:11 Received message from Master: op=PointingHead serial=46190 09:02:11 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:02:11 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:02:11 Point started: ret=0 09:02:11 point_skyscan result=0 09:02:12 Check angles 09:02:12 SkyScan query 09:02:13 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 09:02:13 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 09:02:13 Check angles 09:02:13 SkyScan query 09:02:14 SkyScan query done: ret=0 az=154.185<-10279 ze=-6.495<-12433 Statuses=0009 0008 09:02:14 Msec=750 True Az=154.185 Ze=-6.495 Az status=0009 Ze status=0008 09:02:14 Check angles 09:02:14 SkyScan query 09:02:14 SkyScan query done: ret=0 az=171.765<-11451 ze=-6.495<-12433 Statuses=0009 0008 09:02:14 Msec=1500 True Az=171.765 Ze=-6.495 Az status=0009 Ze status=0008 09:02:14 Check angles 09:02:14 SkyScan query 09:02:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:02:15 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:02:15 Message to Master queued w/err=0: serial=46190 error=0 09:02:20 Received message from Master: op=Filter serial=46191 09:02:20 Color wheel filter change from 0 to 0 09:02:20 FLIGetFilterPos err=0 currentPosition=0 09:02:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:20 Filter is already there-color wheel unchanged 09:02:20 Received message from Master: op=Shutter serial=46192 09:02:20 Shutter LASER close 09:02:20 Received message from Camera: op=State serial=46194 09:02:20 GetSingleValue result=40 Value=cccccccc 09:02:20 SkyScan query 09:02:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:02:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:21 Parameters OK 09:02:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:21 Set A/D data flow result=40 09:02:21 Set A/D channel type result=40 09:02:21 Set A/D encoding result=40 09:02:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:21 Set channel filter=0.000000e+000 result=40 09:02:21 Config A/D Result=40 09:02:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:21 Get A/D filter: -9.255963e+061 result=40 09:02:21 Get A/D value=-858993460 result=40 09:02:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:21 Parameters OK 09:02:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:21 Set A/D data flow result=40 09:02:21 Set A/D channel type result=40 09:02:21 Set A/D encoding result=40 09:02:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:21 Set channel filter=0.000000e+000 result=40 09:02:21 Config A/D Result=40 09:02:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:21 Get A/D filter: -9.255963e+061 result=40 09:02:21 Get A/D value=-858993460 result=40 09:02:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:21 Aux= 09:02:21 Message to Camera, serial 46194 queued 09:02:58 Received message from Master: op=PointingHead serial=46207 09:02:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:02:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:02:58 Point started: ret=0 09:02:58 point_skyscan result=0 09:02:59 Check angles 09:02:59 SkyScan query 09:02:59 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 09:02:59 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 09:03:00 Check angles 09:03:00 SkyScan query 09:03:00 SkyScan query done: ret=0 az=135.48<-9032 ze=6.495<-11567 Statuses=0009 0008 09:03:00 Msec=750 True Az=135.48 Ze=6.495 Az status=0009 Ze status=0008 09:03:00 Check angles 09:03:00 SkyScan query 09:03:01 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 09:03:01 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 09:03:01 Check angles 09:03:01 SkyScan query 09:03:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:03:02 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:03:02 Message to Master queued w/err=0: serial=46207 error=0 09:03:07 Received message from Master: op=Filter serial=46208 09:03:07 Color wheel filter change from 0 to 0 09:03:07 FLIGetFilterPos err=0 currentPosition=0 09:03:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:07 Filter is already there-color wheel unchanged 09:03:07 Received message from Master: op=Shutter serial=46209 09:03:07 Shutter LASER close 09:03:07 Received message from Camera: op=State serial=46211 09:03:07 GetSingleValue result=40 Value=cccccccc 09:03:07 SkyScan query 09:03:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:03:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:07 Parameters OK 09:03:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:07 Set A/D data flow result=40 09:03:07 Set A/D channel type result=40 09:03:07 Set A/D encoding result=40 09:03:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:07 Set channel filter=0.000000e+000 result=40 09:03:07 Config A/D Result=40 09:03:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:07 Get A/D filter: -9.255963e+061 result=40 09:03:07 Get A/D value=-858993460 result=40 09:03:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:07 Parameters OK 09:03:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:07 Set A/D data flow result=40 09:03:07 Set A/D channel type result=40 09:03:07 Set A/D encoding result=40 09:03:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:07 Set channel filter=0.000000e+000 result=40 09:03:07 Config A/D Result=40 09:03:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:07 Get A/D filter: -9.255963e+061 result=40 09:03:07 Get A/D value=-858993460 result=40 09:03:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:07 Aux= 09:03:07 Message to Camera, serial 46211 queued 09:03:38 Received message from Master: op=Identify serial=46214 09:03:44 Received message from Master: op=PointingHead serial=46227 09:03:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:03:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:03:45 Point started: ret=0 09:03:45 point_skyscan result=0 09:03:45 Check angles 09:03:45 SkyScan query 09:03:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.58<-13572 Statuses=0008 0009 09:03:46 Msec=0 True Az=112.995 Ze=-23.58 Az status=0008 Ze status=0009 09:03:46 Check angles 09:03:46 SkyScan query 09:03:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.985<-14999 Statuses=0008 0009 09:03:47 Msec=750 True Az=112.995 Ze=-44.985 Az status=0008 Ze status=0009 09:03:47 Check angles 09:03:47 SkyScan query 09:03:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.925<-16395 Statuses=0008 0009 09:03:47 Msec=1500 True Az=112.995 Ze=-65.925 Az status=0008 Ze status=0009 09:03:48 Check angles 09:03:48 SkyScan query 09:03:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.88<-17792 Statuses=0008 0009 09:03:48 Msec=2250 True Az=112.995 Ze=-86.88 Az status=0008 Ze status=0009 09:03:48 Check angles 09:03:48 SkyScan query 09:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.835<-19189 Statuses=0008 0009 09:03:49 Msec=3000 True Az=112.995 Ze=-107.835 Az status=0008 Ze status=0009 09:03:49 Check angles 09:03:49 SkyScan query 09:03:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.225<-20615 Statuses=0008 0009 09:03:50 Msec=3750 True Az=112.995 Ze=-129.225 Az status=0008 Ze status=0009 [UTC 2019-3-1 09:03:50] 09:03:50 Check angles 09:03:50 SkyScan query 09:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.18<-22012 Statuses=0008 0009 09:03:51 Msec=4500 True Az=112.995 Ze=-150.18 Az status=0008 Ze status=0009 09:03:51 Check angles 09:03:51 SkyScan query 09:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-171<-23400 Statuses=0008 0009 09:03:51 Msec=5250 True Az=112.995 Ze=-171 Az status=0008 Ze status=0009 09:03:51 Check angles 09:03:51 SkyScan query 09:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:03:52 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:03:52 Message to Master queued w/err=0: serial=46227 error=0 09:03:57 Received message from Master: op=Filter serial=46228 09:03:57 Color wheel filter change from 0 to 0 09:03:57 FLIGetFilterPos err=0 currentPosition=0 09:03:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:57 Filter is already there-color wheel unchanged 09:03:57 Received message from Master: op=Shutter serial=46229 09:03:57 Shutter LASER open 09:03:57 Received message from Camera: op=State serial=46231 09:03:57 GetSingleValue result=40 Value=cccccccc 09:03:57 SkyScan query 09:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:03:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:58 Parameters OK 09:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:58 Set A/D data flow result=40 09:03:58 Set A/D channel type result=40 09:03:58 Set A/D encoding result=40 09:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:58 Set channel filter=0.000000e+000 result=40 09:03:58 Config A/D Result=40 09:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:58 Get A/D filter: -9.255963e+061 result=40 09:03:58 Get A/D value=-858993460 result=40 09:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:58 Parameters OK 09:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:58 Set A/D data flow result=40 09:03:58 Set A/D channel type result=40 09:03:58 Set A/D encoding result=40 09:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:58 Set channel filter=0.000000e+000 result=40 09:03:58 Config A/D Result=40 09:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:58 Get A/D filter: -9.255963e+061 result=40 09:03:58 Get A/D value=-858993460 result=40 09:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:58 Aux= 09:03:58 Message to Camera, serial 46231 queued 09:04:06 Received message from Master: op=Shutter serial=46241 09:04:06 Shutter LASER close 09:04:07 Received message from Master: op=PointingHead serial=46245 09:04:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:04:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:04:07 Point started: ret=0 09:04:07 point_skyscan result=0 09:04:08 Check angles 09:04:08 SkyScan query 09:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 09:04:08 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 09:04:09 Check angles 09:04:09 SkyScan query 09:04:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.665<-20111 Statuses=0008 0009 09:04:09 Msec=750 True Az=112.995 Ze=-121.665 Az status=0008 Ze status=0009 09:04:09 Check angles 09:04:09 SkyScan query 09:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 09:04:10 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 09:04:10 Check angles 09:04:10 SkyScan query 09:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.77<-17318 Statuses=0008 0009 09:04:11 Msec=2250 True Az=112.995 Ze=-79.77 Az status=0008 Ze status=0009 09:04:11 Check angles 09:04:11 SkyScan query 09:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.815<-15921 Statuses=0008 0009 09:04:11 Msec=3000 True Az=112.995 Ze=-58.815 Az status=0008 Ze status=0009 09:04:12 Check angles 09:04:12 SkyScan query 09:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 09:04:12 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 09:04:12 Check angles 09:04:12 SkyScan query 09:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.455<-13097 Statuses=0008 0009 09:04:13 Msec=4500 True Az=112.995 Ze=-16.455 Az status=0008 Ze status=0009 09:04:13 Check angles 09:04:13 SkyScan query 09:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=4.41<-11706 Statuses=0008 0009 09:04:14 Msec=5250 True Az=112.995 Ze=4.41 Az status=0008 Ze status=0009 09:04:14 Check angles 09:04:14 SkyScan query 09:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:04:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:04:14 Message to Master queued w/err=0: serial=46245 error=0 09:04:19 Received message from Master: op=Filter serial=46246 09:04:19 Color wheel filter change from 0 to 0 09:04:19 FLIGetFilterPos err=0 currentPosition=0 09:04:19 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:19 Filter is already there-color wheel unchanged 09:04:20 Received message from Master: op=Shutter serial=46247 09:04:20 Shutter LASER close 09:04:20 Received message from Camera: op=State serial=46249 09:04:20 GetSingleValue result=40 Value=cccccccc 09:04:20 SkyScan query 09:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:04:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:20 Parameters OK 09:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:20 Set A/D data flow result=40 09:04:20 Set A/D channel type result=40 09:04:20 Set A/D encoding result=40 09:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:20 Set channel filter=0.000000e+000 result=40 09:04:20 Config A/D Result=40 09:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:20 Get A/D filter: -9.255963e+061 result=40 09:04:20 Get A/D value=-858993460 result=40 09:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:20 Parameters OK 09:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:20 Set A/D data flow result=40 09:04:20 Set A/D channel type result=40 09:04:20 Set A/D encoding result=40 09:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:20 Set channel filter=0.000000e+000 result=40 09:04:20 Config A/D Result=40 09:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:20 Get A/D filter: -9.255963e+061 result=40 09:04:20 Get A/D value=-858993460 result=40 09:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:20 Aux= 09:04:20 Message to Camera, serial 46249 queued 09:04:57 Received message from Master: op=PointingHead serial=46262 09:04:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:04:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:04:58 Point started: ret=0 09:04:58 point_skyscan result=0 09:04:58 Check angles 09:04:58 SkyScan query 09:04:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:04:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:04:59 Message to Master queued w/err=0: serial=46262 error=0 09:05:04 Received message from Master: op=Filter serial=46263 09:05:04 Color wheel filter change from 0 to 0 09:05:04 FLIGetFilterPos err=0 currentPosition=0 09:05:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:04 Filter is already there-color wheel unchanged 09:05:04 Received message from Master: op=Shutter serial=46264 09:05:04 Shutter LASER close 09:05:04 Received message from Camera: op=State serial=46266 09:05:04 GetSingleValue result=40 Value=cccccccc 09:05:04 SkyScan query 09:05:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:05:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:05 Parameters OK 09:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:05 Set A/D data flow result=40 09:05:05 Set A/D channel type result=40 09:05:05 Set A/D encoding result=40 09:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:05 Set channel filter=0.000000e+000 result=40 09:05:05 Config A/D Result=40 09:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:05 Get A/D filter: -9.255963e+061 result=40 09:05:05 Get A/D value=-858993460 result=40 09:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:05 Parameters OK 09:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:05 Set A/D data flow result=40 09:05:05 Set A/D channel type result=40 09:05:05 Set A/D encoding result=40 09:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:05 Set channel filter=0.000000e+000 result=40 09:05:05 Config A/D Result=40 09:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:05 Get A/D filter: -9.255963e+061 result=40 09:05:05 Get A/D value=-858993460 result=40 09:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:05 Aux= 09:05:05 Message to Camera, serial 46266 queued 09:05:42 Received message from Master: op=PointingHead serial=46279 09:05:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:05:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:05:42 Point started: ret=0 09:05:42 point_skyscan result=0 09:05:43 Check angles 09:05:43 SkyScan query 09:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:05:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:05:43 Message to Master queued w/err=0: serial=46279 error=0 09:05:48 Received message from Master: op=Filter serial=46280 09:05:48 Color wheel filter change from 0 to 0 09:05:48 FLIGetFilterPos err=0 currentPosition=0 09:05:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:48 Filter is already there-color wheel unchanged 09:05:48 Received message from Master: op=Shutter serial=46281 09:05:48 Shutter LASER close 09:05:48 Received message from Camera: op=State serial=46283 09:05:48 GetSingleValue result=40 Value=cccccccc 09:05:48 SkyScan query 09:05:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:05:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:49 Parameters OK 09:05:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:49 Set A/D data flow result=40 09:05:49 Set A/D channel type result=40 09:05:49 Set A/D encoding result=40 09:05:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:49 Set channel filter=0.000000e+000 result=40 09:05:49 Config A/D Result=40 09:05:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:49 Get A/D filter: -9.255963e+061 result=40 09:05:49 Get A/D value=-858993460 result=40 09:05:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:49 Parameters OK 09:05:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:49 Set A/D data flow result=40 09:05:49 Set A/D channel type result=40 09:05:49 Set A/D encoding result=40 09:05:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:49 Set channel filter=0.000000e+000 result=40 09:05:49 Config A/D Result=40 09:05:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:49 Get A/D filter: -9.255963e+061 result=40 09:05:49 Get A/D value=-858993460 result=40 09:05:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:49 Aux= 09:05:49 Message to Camera, serial 46283 queued 09:06:26 Received message from Master: op=PointingHead serial=46296 09:06:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:06:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:06:26 Point started: ret=0 09:06:26 point_skyscan result=0 09:06:27 Check angles 09:06:27 SkyScan query 09:06:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:06:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:06:27 Message to Master queued w/err=0: serial=46296 error=0 09:06:32 Received message from Master: op=Filter serial=46297 09:06:32 Color wheel filter change from 0 to 0 09:06:32 FLIGetFilterPos err=0 currentPosition=0 09:06:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:32 Filter is already there-color wheel unchanged 09:06:33 Received message from Master: op=Shutter serial=46298 09:06:33 Shutter LASER close 09:06:33 Received message from Camera: op=State serial=46300 09:06:33 GetSingleValue result=40 Value=cccccccc 09:06:33 SkyScan query 09:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:06:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:33 Parameters OK 09:06:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:33 Set A/D data flow result=40 09:06:33 Set A/D channel type result=40 09:06:33 Set A/D encoding result=40 09:06:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:33 Set channel filter=0.000000e+000 result=40 09:06:33 Config A/D Result=40 09:06:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:33 Get A/D filter: -9.255963e+061 result=40 09:06:33 Get A/D value=-858993460 result=40 09:06:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:33 Parameters OK 09:06:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:33 Set A/D data flow result=40 09:06:33 Set A/D channel type result=40 09:06:33 Set A/D encoding result=40 09:06:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:33 Set channel filter=0.000000e+000 result=40 09:06:33 Config A/D Result=40 09:06:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:33 Get A/D filter: -9.255963e+061 result=40 09:06:33 Get A/D value=-858993460 result=40 09:06:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:33 Aux= 09:06:33 Message to Camera, serial 46300 queued 09:07:10 Received message from Master: op=PointingHead serial=46313 09:07:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:07:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:07:10 Point started: ret=0 09:07:10 point_skyscan result=0 09:07:11 Check angles 09:07:11 SkyScan query 09:07:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 09:07:12 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 09:07:12 Check angles 09:07:12 SkyScan query 09:07:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 09:07:12 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 09:07:13 Check angles 09:07:13 SkyScan query 09:07:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 09:07:13 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 09:07:13 Check angles 09:07:13 SkyScan query 09:07:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 09:07:14 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 09:07:14 Check angles 09:07:14 SkyScan query 09:07:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.985<-19199 Statuses=0008 0009 09:07:15 Msec=3000 True Az=112.995 Ze=-107.985 Az status=0008 Ze status=0009 09:07:15 Check angles 09:07:15 SkyScan query 09:07:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.925<-20595 Statuses=0008 0009 09:07:16 Msec=3750 True Az=112.995 Ze=-128.925 Az status=0008 Ze status=0009 09:07:16 Check angles 09:07:16 SkyScan query 09:07:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.315<-22021 Statuses=0008 0009 09:07:16 Msec=4500 True Az=112.995 Ze=-150.315 Az status=0008 Ze status=0009 09:07:16 Check angles 09:07:16 SkyScan query 09:07:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0008 0009 09:07:17 Msec=5250 True Az=112.995 Ze=-171.45 Az status=0008 Ze status=0009 09:07:17 Check angles 09:07:17 SkyScan query 09:07:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:07:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:07:18 Message to Master queued w/err=0: serial=46313 error=0 09:07:23 Received message from Master: op=Filter serial=46314 09:07:23 Color wheel filter change from 0 to 0 09:07:23 FLIGetFilterPos err=0 currentPosition=0 09:07:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:23 Filter is already there-color wheel unchanged 09:07:23 Received message from Master: op=Shutter serial=46315 09:07:23 Shutter LASER open 09:07:23 Received message from Camera: op=State serial=46317 09:07:23 GetSingleValue result=40 Value=cccccccc 09:07:23 SkyScan query 09:07:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:07:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:24 Parameters OK 09:07:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:24 Set A/D data flow result=40 09:07:24 Set A/D channel type result=40 09:07:24 Set A/D encoding result=40 09:07:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:24 Set channel filter=0.000000e+000 result=40 09:07:24 Config A/D Result=40 09:07:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:24 Get A/D filter: -9.255963e+061 result=40 09:07:24 Get A/D value=-858993460 result=40 09:07:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:24 Parameters OK 09:07:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:24 Set A/D data flow result=40 09:07:24 Set A/D channel type result=40 09:07:24 Set A/D encoding result=40 09:07:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:24 Set channel filter=0.000000e+000 result=40 09:07:24 Config A/D Result=40 09:07:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:24 Get A/D filter: -9.255963e+061 result=40 09:07:24 Get A/D value=-858993460 result=40 09:07:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:24 Aux= 09:07:24 Message to Camera, serial 46317 queued 09:07:32 Received message from Master: op=Shutter serial=46327 09:07:32 Shutter LASER close 09:07:33 Received message from Master: op=PointingHead serial=46331 09:07:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:07:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:07:33 Point started: ret=0 09:07:33 point_skyscan result=0 09:07:34 Check angles 09:07:34 SkyScan query 09:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 09:07:35 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 09:07:35 Check angles 09:07:35 SkyScan query 09:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 09:07:35 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 09:07:35 Check angles 09:07:35 SkyScan query 09:07:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 09:07:36 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 09:07:36 Check angles 09:07:36 SkyScan query 09:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 09:07:37 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 09:07:37 Check angles 09:07:37 SkyScan query 09:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 09:07:38 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 09:07:38 Check angles 09:07:38 SkyScan query 09:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 09:07:38 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 09:07:38 Check angles 09:07:38 SkyScan query 09:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 09:07:39 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 09:07:39 Check angles 09:07:39 SkyScan query 09:07:40 SkyScan query done: ret=0 az=112.995<-7533 ze=3.69<-11754 Statuses=0008 0009 09:07:40 Msec=5250 True Az=112.995 Ze=3.69 Az status=0008 Ze status=0009 09:07:40 Check angles 09:07:40 SkyScan query 09:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:07:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:07:41 Message to Master queued w/err=0: serial=46331 error=0 09:07:46 Received message from Master: op=Filter serial=46332 09:07:46 Color wheel filter change from 0 to 0 09:07:46 FLIGetFilterPos err=0 currentPosition=0 09:07:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:46 Filter is already there-color wheel unchanged 09:07:46 Received message from Master: op=Shutter serial=46333 09:07:46 Shutter LASER close 09:07:46 Received message from Camera: op=State serial=46335 09:07:46 GetSingleValue result=40 Value=cccccccc 09:07:46 SkyScan query 09:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:07:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:46 Parameters OK 09:07:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:46 Set A/D data flow result=40 09:07:46 Set A/D channel type result=40 09:07:46 Set A/D encoding result=40 09:07:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:46 Set channel filter=0.000000e+000 result=40 09:07:46 Config A/D Result=40 09:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:46 Get A/D filter: -9.255963e+061 result=40 09:07:46 Get A/D value=-858993460 result=40 09:07:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:46 Parameters OK 09:07:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:46 Set A/D data flow result=40 09:07:46 Set A/D channel type result=40 09:07:46 Set A/D encoding result=40 09:07:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:46 Set channel filter=0.000000e+000 result=40 09:07:46 Config A/D Result=40 09:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:46 Get A/D filter: -9.255963e+061 result=40 09:07:46 Get A/D value=-858993460 result=40 09:07:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:46 Aux= 09:07:46 Message to Camera, serial 46335 queued 09:08:23 Received message from Master: op=PointingHead serial=46348 09:08:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:08:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:08:24 Point started: ret=0 09:08:24 point_skyscan result=0 09:08:24 Check angles 09:08:24 SkyScan query 09:08:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:08:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:08:25 Message to Master queued w/err=0: serial=46348 error=0 09:08:30 Received message from Master: op=Filter serial=46349 09:08:30 Color wheel filter change from 0 to 0 09:08:30 FLIGetFilterPos err=0 currentPosition=0 09:08:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:30 Filter is already there-color wheel unchanged 09:08:30 Received message from Master: op=Shutter serial=46350 09:08:30 Shutter LASER close 09:08:30 Received message from Camera: op=State serial=46352 09:08:30 GetSingleValue result=40 Value=cccccccc 09:08:30 SkyScan query 09:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:08:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:31 Parameters OK 09:08:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:31 Set A/D data flow result=40 09:08:31 Set A/D channel type result=40 09:08:31 Set A/D encoding result=40 09:08:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:31 Set channel filter=0.000000e+000 result=40 09:08:31 Config A/D Result=40 09:08:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:31 Get A/D filter: -9.255963e+061 result=40 09:08:31 Get A/D value=-858993460 result=40 09:08:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:31 Parameters OK 09:08:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:31 Set A/D data flow result=40 09:08:31 Set A/D channel type result=40 09:08:31 Set A/D encoding result=40 09:08:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:31 Set channel filter=0.000000e+000 result=40 09:08:31 Config A/D Result=40 09:08:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:31 Get A/D filter: -9.255963e+061 result=40 09:08:31 Get A/D value=-858993460 result=40 09:08:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:31 Aux= 09:08:31 Message to Camera, serial 46352 queued 09:09:08 Received message from Master: op=PointingHead serial=46365 09:09:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:09:08 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:09:08 Point started: ret=0 09:09:08 point_skyscan result=0 09:09:09 Check angles 09:09:09 SkyScan query 09:09:09 SkyScan query done: ret=0 az=135.72<-9048 ze=-6.51<-12434 Statuses=0009 0008 09:09:09 Msec=0 True Az=135.72 Ze=-6.51 Az status=0009 Ze status=0008 09:09:09 Check angles 09:09:09 SkyScan query 09:09:10 SkyScan query done: ret=0 az=153.225<-10215 ze=-6.495<-12433 Statuses=0009 0008 09:09:10 Msec=750 True Az=153.225 Ze=-6.495 Az status=0009 Ze status=0008 09:09:10 Check angles 09:09:10 SkyScan query 09:09:11 SkyScan query done: ret=0 az=171.195<-11413 ze=-6.495<-12433 Statuses=0009 0008 09:09:11 Msec=1500 True Az=171.195 Ze=-6.495 Az status=0009 Ze status=0008 09:09:11 Check angles 09:09:11 SkyScan query 09:09:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:09:12 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:09:12 Message to Master queued w/err=0: serial=46365 error=0 09:09:17 Received message from Master: op=Filter serial=46366 09:09:17 Color wheel filter change from 0 to 0 09:09:17 FLIGetFilterPos err=0 currentPosition=0 09:09:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:17 Filter is already there-color wheel unchanged 09:09:17 Received message from Master: op=Shutter serial=46367 09:09:17 Shutter LASER close 09:09:17 Received message from Camera: op=State serial=46369 09:09:17 GetSingleValue result=40 Value=cccccccc 09:09:17 SkyScan query 09:09:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:09:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:17 Parameters OK 09:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:17 Set A/D data flow result=40 09:09:17 Set A/D channel type result=40 09:09:17 Set A/D encoding result=40 09:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:17 Set channel filter=0.000000e+000 result=40 09:09:17 Config A/D Result=40 09:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:17 Get A/D filter: -9.255963e+061 result=40 09:09:17 Get A/D value=-858993460 result=40 09:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:17 Parameters OK 09:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:17 Set A/D data flow result=40 09:09:17 Set A/D channel type result=40 09:09:17 Set A/D encoding result=40 09:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:17 Set channel filter=0.000000e+000 result=40 09:09:17 Config A/D Result=40 09:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:17 Get A/D filter: -9.255963e+061 result=40 09:09:17 Get A/D value=-858993460 result=40 09:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:17 Aux= 09:09:17 Message to Camera, serial 46369 queued 09:09:54 Received message from Master: op=PointingHead serial=46382 09:09:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:09:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:09:54 Point started: ret=0 09:09:54 point_skyscan result=0 09:09:55 Check angles 09:09:55 SkyScan query 09:09:56 SkyScan query done: ret=0 az=153.195<-10213 ze=6.51<-11566 Statuses=0009 0008 09:09:56 Msec=0 True Az=153.195 Ze=6.51 Az status=0009 Ze status=0008 09:09:56 Check angles 09:09:56 SkyScan query 09:09:57 SkyScan query done: ret=0 az=135.795<-9053 ze=6.495<-11567 Statuses=0009 0008 09:09:57 Msec=750 True Az=135.795 Ze=6.495 Az status=0009 Ze status=0008 09:09:57 Check angles 09:09:57 SkyScan query 09:09:57 SkyScan query done: ret=0 az=118.29<-7886 ze=6.495<-11567 Statuses=0009 0008 09:09:57 Msec=1500 True Az=118.29 Ze=6.495 Az status=0009 Ze status=0008 09:09:57 Check angles 09:09:57 SkyScan query 09:09:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:09:58 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:09:58 Message to Master queued w/err=0: serial=46382 error=0 09:10:03 Received message from Master: op=Filter serial=46383 09:10:03 Color wheel filter change from 0 to 0 09:10:03 FLIGetFilterPos err=0 currentPosition=0 09:10:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:03 Filter is already there-color wheel unchanged 09:10:03 Received message from Master: op=Shutter serial=46384 09:10:03 Shutter LASER close 09:10:03 Received message from Camera: op=State serial=46386 09:10:03 GetSingleValue result=40 Value=cccccccc 09:10:03 SkyScan query 09:10:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:04 Parameters OK 09:10:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:04 Set A/D data flow result=40 09:10:04 Set A/D channel type result=40 09:10:04 Set A/D encoding result=40 09:10:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:04 Set channel filter=0.000000e+000 result=40 09:10:04 Config A/D Result=40 09:10:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:04 Get A/D filter: -9.255963e+061 result=40 09:10:04 Get A/D value=-858993460 result=40 09:10:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:04 Parameters OK 09:10:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:04 Set A/D data flow result=40 09:10:04 Set A/D channel type result=40 09:10:04 Set A/D encoding result=40 09:10:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:04 Set channel filter=0.000000e+000 result=40 09:10:04 Config A/D Result=40 09:10:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:04 Get A/D filter: -9.255963e+061 result=40 09:10:04 Get A/D value=-858993460 result=40 09:10:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:04 Aux= 09:10:04 Message to Camera, serial 46386 queued 09:10:41 Received message from Master: op=PointingHead serial=46399 09:10:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:10:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:10:41 Point started: ret=0 09:10:41 point_skyscan result=0 09:10:42 Check angles 09:10:42 SkyScan query 09:10:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 09:10:42 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 09:10:43 Check angles 09:10:43 SkyScan query 09:10:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 09:10:43 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 09:10:43 Check angles 09:10:43 SkyScan query 09:10:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 09:10:44 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 09:10:44 Check angles 09:10:44 SkyScan query 09:10:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 09:10:45 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 09:10:45 Check angles 09:10:45 SkyScan query 09:10:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.385<-19159 Statuses=0008 0009 09:10:45 Msec=3000 True Az=112.995 Ze=-107.385 Az status=0008 Ze status=0009 09:10:46 Check angles 09:10:46 SkyScan query 09:10:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.76<-20584 Statuses=0008 0009 09:10:46 Msec=3750 True Az=112.995 Ze=-128.76 Az status=0008 Ze status=0009 09:10:46 Check angles 09:10:46 SkyScan query 09:10:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 09:10:47 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 09:10:47 Check angles 09:10:47 SkyScan query 09:10:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 09:10:48 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 09:10:48 Check angles 09:10:48 SkyScan query 09:10:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:10:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:10:48 Message to Master queued w/err=0: serial=46399 error=0 09:10:53 Received message from Master: op=Filter serial=46400 09:10:53 Color wheel filter change from 0 to 0 09:10:53 FLIGetFilterPos err=0 currentPosition=0 09:10:53 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:53 Filter is already there-color wheel unchanged 09:10:54 Received message from Master: op=Shutter serial=46401 09:10:54 Shutter LASER open 09:10:54 Received message from Camera: op=State serial=46403 09:10:54 GetSingleValue result=40 Value=cccccccc 09:10:54 SkyScan query 09:10:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:10:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:54 Parameters OK 09:10:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:54 Set A/D data flow result=40 09:10:54 Set A/D channel type result=40 09:10:54 Set A/D encoding result=40 09:10:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:54 Set channel filter=0.000000e+000 result=40 09:10:54 Config A/D Result=40 09:10:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:54 Get A/D filter: -9.255963e+061 result=40 09:10:54 Get A/D value=-858993460 result=40 09:10:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:54 Parameters OK 09:10:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:54 Set A/D data flow result=40 09:10:54 Set A/D channel type result=40 09:10:54 Set A/D encoding result=40 09:10:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:54 Set channel filter=0.000000e+000 result=40 09:10:54 Config A/D Result=40 09:10:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:54 Get A/D filter: -9.255963e+061 result=40 09:10:54 Get A/D value=-858993460 result=40 09:10:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:54 Aux= 09:10:54 Message to Camera, serial 46403 queued 09:11:03 Received message from Master: op=Shutter serial=46413 09:11:03 Shutter LASER close 09:11:03 Received message from Master: op=PointingHead serial=46417 09:11:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:11:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:11:04 Point started: ret=0 09:11:04 point_skyscan result=0 09:11:04 Check angles 09:11:04 SkyScan query 09:11:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 09:11:05 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 09:11:05 Check angles 09:11:05 SkyScan query 09:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 09:11:06 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 09:11:06 Check angles 09:11:06 SkyScan query 09:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.475<-18765 Statuses=0008 0009 09:11:06 Msec=1500 True Az=112.995 Ze=-101.475 Az status=0008 Ze status=0009 09:11:07 Check angles 09:11:07 SkyScan query 09:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.505<-17367 Statuses=0008 0009 09:11:07 Msec=2250 True Az=112.995 Ze=-80.505 Az status=0008 Ze status=0009 09:11:07 Check angles 09:11:07 SkyScan query 09:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.565<-15971 Statuses=0008 0009 09:11:08 Msec=3000 True Az=112.995 Ze=-59.565 Az status=0008 Ze status=0009 09:11:08 Check angles 09:11:08 SkyScan query 09:11:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 09:11:09 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 09:11:09 Check angles 09:11:09 SkyScan query 09:11:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.22<-13148 Statuses=0008 0009 09:11:09 Msec=4500 True Az=112.995 Ze=-17.22 Az status=0008 Ze status=0009 09:11:10 Check angles 09:11:10 SkyScan query 09:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=3.75<-11750 Statuses=0008 0009 09:11:10 Msec=5250 True Az=112.995 Ze=3.75 Az status=0008 Ze status=0009 09:11:10 Check angles 09:11:10 SkyScan query 09:11:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:11:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:11:11 Message to Master queued w/err=0: serial=46417 error=0 09:11:16 Received message from Master: op=Filter serial=46418 09:11:16 Color wheel filter change from 0 to 0 09:11:16 FLIGetFilterPos err=0 currentPosition=0 09:11:16 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:16 Filter is already there-color wheel unchanged 09:11:16 Received message from Master: op=Shutter serial=46419 09:11:16 Shutter LASER close 09:11:16 Received message from Camera: op=State serial=46421 09:11:16 GetSingleValue result=40 Value=cccccccc 09:11:16 SkyScan query 09:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:11:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:17 Parameters OK 09:11:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:17 Set A/D data flow result=40 09:11:17 Set A/D channel type result=40 09:11:17 Set A/D encoding result=40 09:11:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:17 Set channel filter=0.000000e+000 result=40 09:11:17 Config A/D Result=40 09:11:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:17 Get A/D filter: -9.255963e+061 result=40 09:11:17 Get A/D value=-858993460 result=40 09:11:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:17 Parameters OK 09:11:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:17 Set A/D data flow result=40 09:11:17 Set A/D channel type result=40 09:11:17 Set A/D encoding result=40 09:11:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:17 Set channel filter=0.000000e+000 result=40 09:11:17 Config A/D Result=40 09:11:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:17 Get A/D filter: -9.255963e+061 result=40 09:11:17 Get A/D value=-858993460 result=40 09:11:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:17 Aux= 09:11:17 Message to Camera, serial 46421 queued 09:11:54 Received message from Master: op=PointingHead serial=46434 09:11:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:11:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:11:54 Point started: ret=0 09:11:54 point_skyscan result=0 09:11:55 Check angles 09:11:55 SkyScan query 09:11:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:11:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:11:55 Message to Master queued w/err=0: serial=46434 error=0 09:12:00 Received message from Master: op=Filter serial=46435 09:12:00 Color wheel filter change from 0 to 0 09:12:00 FLIGetFilterPos err=0 currentPosition=0 09:12:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:00 Filter is already there-color wheel unchanged 09:12:00 Received message from Master: op=Shutter serial=46436 09:12:00 Shutter LASER close 09:12:01 Received message from Camera: op=State serial=46438 09:12:01 GetSingleValue result=40 Value=cccccccc 09:12:01 SkyScan query 09:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:12:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:01 Parameters OK 09:12:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:01 Set A/D data flow result=40 09:12:01 Set A/D channel type result=40 09:12:01 Set A/D encoding result=40 09:12:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:01 Set channel filter=0.000000e+000 result=40 09:12:01 Config A/D Result=40 09:12:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:01 Get A/D filter: -9.255963e+061 result=40 09:12:01 Get A/D value=-858993460 result=40 09:12:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:01 Parameters OK 09:12:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:01 Set A/D data flow result=40 09:12:01 Set A/D channel type result=40 09:12:01 Set A/D encoding result=40 09:12:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:01 Set channel filter=0.000000e+000 result=40 09:12:01 Config A/D Result=40 09:12:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:01 Get A/D filter: -9.255963e+061 result=40 09:12:01 Get A/D value=-858993460 result=40 09:12:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:01 Aux= 09:12:01 Message to Camera, serial 46438 queued 09:12:37 Received message from Master: op=PointingHead serial=46450 09:12:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:12:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:12:37 Point started: ret=0 09:12:37 point_skyscan result=0 09:12:38 Check angles 09:12:38 SkyScan query 09:12:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:12:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:12:39 Message to Master queued w/err=0: serial=46450 error=0 09:12:44 Received message from Master: op=Filter serial=46451 09:12:44 Color wheel filter change from 0 to 0 09:12:44 FLIGetFilterPos err=0 currentPosition=0 09:12:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:44 Filter is already there-color wheel unchanged 09:12:44 Received message from Master: op=Shutter serial=46452 09:12:44 Shutter LASER close 09:12:44 Received message from Camera: op=State serial=46454 09:12:44 GetSingleValue result=40 Value=cccccccc 09:12:44 SkyScan query 09:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:12:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:44 Parameters OK 09:12:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:44 Set A/D data flow result=40 09:12:44 Set A/D channel type result=40 09:12:44 Set A/D encoding result=40 09:12:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:44 Set channel filter=0.000000e+000 result=40 09:12:44 Config A/D Result=40 09:12:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:44 Get A/D filter: -9.255963e+061 result=40 09:12:44 Get A/D value=-858993460 result=40 09:12:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:44 Parameters OK 09:12:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:44 Set A/D data flow result=40 09:12:44 Set A/D channel type result=40 09:12:44 Set A/D encoding result=40 09:12:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:44 Set channel filter=0.000000e+000 result=40 09:12:44 Config A/D Result=40 09:12:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:44 Get A/D filter: -9.255963e+061 result=40 09:12:44 Get A/D value=-858993460 result=40 09:12:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:44 Aux= 09:12:44 Message to Camera, serial 46454 queued 09:13:21 Received message from Master: op=PointingHead serial=46467 09:13:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:13:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:13:22 Point started: ret=0 09:13:22 point_skyscan result=0 09:13:22 Check angles 09:13:22 SkyScan query 09:13:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:13:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:13:23 Message to Master queued w/err=0: serial=46467 error=0 09:13:28 Received message from Master: op=Filter serial=46468 09:13:28 Color wheel filter change from 0 to 0 09:13:28 FLIGetFilterPos err=0 currentPosition=0 09:13:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:28 Filter is already there-color wheel unchanged 09:13:28 Received message from Master: op=Shutter serial=46469 09:13:28 Shutter LASER close 09:13:28 Received message from Camera: op=State serial=46471 09:13:28 GetSingleValue result=40 Value=cccccccc 09:13:28 SkyScan query 09:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:13:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:29 Parameters OK 09:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:29 Set A/D data flow result=40 09:13:29 Set A/D channel type result=40 09:13:29 Set A/D encoding result=40 09:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:29 Set channel filter=0.000000e+000 result=40 09:13:29 Config A/D Result=40 09:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:29 Get A/D filter: -9.255963e+061 result=40 09:13:29 Get A/D value=-858993460 result=40 09:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:29 Parameters OK 09:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:29 Set A/D data flow result=40 09:13:29 Set A/D channel type result=40 09:13:29 Set A/D encoding result=40 09:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:29 Set channel filter=0.000000e+000 result=40 09:13:29 Config A/D Result=40 09:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:29 Get A/D filter: -9.255963e+061 result=40 09:13:29 Get A/D value=-858993460 result=40 09:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:29 Aux= 09:13:29 Message to Camera, serial 46471 queued 09:14:06 Received message from Master: op=PointingHead serial=46484 09:14:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:14:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:14:06 Point started: ret=0 09:14:06 point_skyscan result=0 09:14:07 Check angles 09:14:07 SkyScan query 09:14:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 09:14:07 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 09:14:07 Check angles 09:14:07 SkyScan query 09:14:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 09:14:08 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 09:14:08 Check angles 09:14:08 SkyScan query 09:14:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 09:14:09 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 09:14:09 Check angles 09:14:09 SkyScan query 09:14:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 09:14:10 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 09:14:10 Check angles 09:14:10 SkyScan query 09:14:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.49<-19166 Statuses=0008 0009 09:14:10 Msec=3000 True Az=112.995 Ze=-107.49 Az status=0008 Ze status=0009 09:14:10 Check angles 09:14:10 SkyScan query 09:14:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.415<-20561 Statuses=0008 0009 09:14:11 Msec=3750 True Az=112.995 Ze=-128.415 Az status=0008 Ze status=0009 09:14:11 Check angles 09:14:11 SkyScan query 09:14:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.385<-21959 Statuses=0008 0009 09:14:12 Msec=4500 True Az=112.995 Ze=-149.385 Az status=0008 Ze status=0009 09:14:12 Check angles 09:14:12 SkyScan query 09:14:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.31<-23354 Statuses=0008 0009 09:14:13 Msec=5250 True Az=112.995 Ze=-170.31 Az status=0008 Ze status=0009 09:14:13 Check angles 09:14:13 SkyScan query 09:14:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:14:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 [UTC 2019-3-1 09:14:13] 09:14:13 Message to Master queued w/err=0: serial=46484 error=0 09:14:18 Received message from Master: op=Filter serial=46485 09:14:18 Color wheel filter change from 0 to 0 09:14:18 FLIGetFilterPos err=0 currentPosition=0 09:14:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:18 Filter is already there-color wheel unchanged 09:14:18 Received message from Master: op=Shutter serial=46486 09:14:18 Shutter LASER open 09:14:19 Received message from Camera: op=State serial=46488 09:14:19 GetSingleValue result=40 Value=cccccccc 09:14:19 SkyScan query 09:14:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:14:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:19 Parameters OK 09:14:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:19 Set A/D data flow result=40 09:14:19 Set A/D channel type result=40 09:14:19 Set A/D encoding result=40 09:14:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:19 Set channel filter=0.000000e+000 result=40 09:14:19 Config A/D Result=40 09:14:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:19 Get A/D filter: -9.255963e+061 result=40 09:14:19 Get A/D value=-858993460 result=40 09:14:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:19 Parameters OK 09:14:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:19 Set A/D data flow result=40 09:14:19 Set A/D channel type result=40 09:14:19 Set A/D encoding result=40 09:14:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:19 Set channel filter=0.000000e+000 result=40 09:14:19 Config A/D Result=40 09:14:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:19 Get A/D filter: -9.255963e+061 result=40 09:14:19 Get A/D value=-858993460 result=40 09:14:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:19 Aux= 09:14:19 Message to Camera, serial 46488 queued 09:14:28 Received message from Master: op=Shutter serial=46498 09:14:28 Shutter LASER close 09:14:28 Received message from Master: op=PointingHead serial=46502 09:14:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:14:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:14:29 Point started: ret=0 09:14:29 point_skyscan result=0 09:14:29 Check angles 09:14:29 SkyScan query 09:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 09:14:30 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 09:14:30 Check angles 09:14:30 SkyScan query 09:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.68<-20112 Statuses=0008 0009 09:14:31 Msec=750 True Az=112.995 Ze=-121.68 Az status=0008 Ze status=0009 09:14:31 Check angles 09:14:31 SkyScan query 09:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.68<-18712 Statuses=0008 0009 09:14:31 Msec=1500 True Az=112.995 Ze=-100.68 Az status=0008 Ze status=0009 09:14:32 Check angles 09:14:32 SkyScan query 09:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.8<-17320 Statuses=0008 0009 09:14:32 Msec=2250 True Az=112.995 Ze=-79.8 Az status=0008 Ze status=0009 09:14:32 Check angles 09:14:32 SkyScan query 09:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 09:14:33 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 09:14:33 Check angles 09:14:33 SkyScan query 09:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 09:14:34 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 09:14:34 Check angles 09:14:34 SkyScan query 09:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.905<-13127 Statuses=0008 0009 09:14:34 Msec=4500 True Az=112.995 Ze=-16.905 Az status=0008 Ze status=0009 09:14:35 Check angles 09:14:35 SkyScan query 09:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 09:14:35 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 09:14:35 Check angles 09:14:35 SkyScan query 09:14:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:14:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:14:36 Message to Master queued w/err=0: serial=46502 error=0 09:14:41 Received message from Master: op=Filter serial=46503 09:14:41 Color wheel filter change from 0 to 0 09:14:41 FLIGetFilterPos err=0 currentPosition=0 09:14:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:41 Filter is already there-color wheel unchanged 09:14:41 Received message from Master: op=Shutter serial=46504 09:14:41 Shutter LASER close 09:14:41 Received message from Camera: op=State serial=46506 09:14:41 GetSingleValue result=40 Value=cccccccc 09:14:41 SkyScan query 09:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:14:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:42 Parameters OK 09:14:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:42 Set A/D data flow result=40 09:14:42 Set A/D channel type result=40 09:14:42 Set A/D encoding result=40 09:14:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:42 Set channel filter=0.000000e+000 result=40 09:14:42 Config A/D Result=40 09:14:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:42 Get A/D filter: -9.255963e+061 result=40 09:14:42 Get A/D value=-858993460 result=40 09:14:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:42 Parameters OK 09:14:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:42 Set A/D data flow result=40 09:14:42 Set A/D channel type result=40 09:14:42 Set A/D encoding result=40 09:14:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:42 Set channel filter=0.000000e+000 result=40 09:14:42 Config A/D Result=40 09:14:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:42 Get A/D filter: -9.255963e+061 result=40 09:14:42 Get A/D value=-858993460 result=40 09:14:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:42 Aux= 09:14:42 Message to Camera, serial 46506 queued 09:15:19 Received message from Master: op=PointingHead serial=46519 09:15:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:15:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:15:19 Point started: ret=0 09:15:19 point_skyscan result=0 09:15:20 Check angles 09:15:20 SkyScan query 09:15:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:15:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:15:20 Message to Master queued w/err=0: serial=46519 error=0 09:15:25 Received message from Master: op=Filter serial=46520 09:15:25 Color wheel filter change from 0 to 0 09:15:25 FLIGetFilterPos err=0 currentPosition=0 09:15:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:25 Filter is already there-color wheel unchanged 09:15:26 Received message from Master: op=Shutter serial=46521 09:15:26 Shutter LASER close 09:15:26 Received message from Camera: op=State serial=46523 09:15:26 GetSingleValue result=40 Value=cccccccc 09:15:26 SkyScan query 09:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:15:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:26 Parameters OK 09:15:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:26 Set A/D data flow result=40 09:15:26 Set A/D channel type result=40 09:15:26 Set A/D encoding result=40 09:15:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:26 Set channel filter=0.000000e+000 result=40 09:15:26 Config A/D Result=40 09:15:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:26 Get A/D filter: -9.255963e+061 result=40 09:15:26 Get A/D value=-858993460 result=40 09:15:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:26 Parameters OK 09:15:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:26 Set A/D data flow result=40 09:15:26 Set A/D channel type result=40 09:15:26 Set A/D encoding result=40 09:15:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:26 Set channel filter=0.000000e+000 result=40 09:15:26 Config A/D Result=40 09:15:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:26 Get A/D filter: -9.255963e+061 result=40 09:15:26 Get A/D value=-858993460 result=40 09:15:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:26 Aux= 09:15:26 Message to Camera, serial 46523 queued 09:16:03 Received message from Master: op=PointingHead serial=46536 09:16:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:16:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:16:03 Point started: ret=0 09:16:03 point_skyscan result=0 09:16:04 Check angles 09:16:04 SkyScan query 09:16:05 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 09:16:05 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 09:16:05 Check angles 09:16:05 SkyScan query 09:16:05 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 09:16:05 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 09:16:06 Check angles 09:16:06 SkyScan query 09:16:06 SkyScan query done: ret=0 az=170.895<-11393 ze=-6.495<-12433 Statuses=0009 0008 09:16:06 Msec=1500 True Az=170.895 Ze=-6.495 Az status=0009 Ze status=0008 09:16:06 Check angles 09:16:06 SkyScan query 09:16:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:16:07 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:16:07 Message to Master queued w/err=0: serial=46536 error=0 09:16:12 Received message from Master: op=Filter serial=46537 09:16:12 Color wheel filter change from 0 to 0 09:16:12 FLIGetFilterPos err=0 currentPosition=0 09:16:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:12 Filter is already there-color wheel unchanged 09:16:12 Received message from Master: op=Shutter serial=46538 09:16:12 Shutter LASER close 09:16:12 Received message from Camera: op=State serial=46540 09:16:12 GetSingleValue result=40 Value=cccccccc 09:16:12 SkyScan query 09:16:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:16:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:13 Parameters OK 09:16:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:13 Set A/D data flow result=40 09:16:13 Set A/D channel type result=40 09:16:13 Set A/D encoding result=40 09:16:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:13 Set channel filter=0.000000e+000 result=40 09:16:13 Config A/D Result=40 09:16:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:13 Get A/D filter: -9.255963e+061 result=40 09:16:13 Get A/D value=-858993460 result=40 09:16:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:13 Parameters OK 09:16:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:13 Set A/D data flow result=40 09:16:13 Set A/D channel type result=40 09:16:13 Set A/D encoding result=40 09:16:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:13 Set channel filter=0.000000e+000 result=40 09:16:13 Config A/D Result=40 09:16:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:13 Get A/D filter: -9.255963e+061 result=40 09:16:13 Get A/D value=-858993460 result=40 09:16:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:13 Aux= 09:16:13 Message to Camera, serial 46540 queued 09:16:50 Received message from Master: op=PointingHead serial=46553 09:16:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:16:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:16:50 Point started: ret=0 09:16:50 point_skyscan result=0 09:16:51 Check angles 09:16:51 SkyScan query 09:16:51 SkyScan query done: ret=0 az=153.255<-10217 ze=6.51<-11566 Statuses=0009 0008 09:16:51 Msec=0 True Az=153.255 Ze=6.51 Az status=0009 Ze status=0008 09:16:51 Check angles 09:16:51 SkyScan query 09:16:52 SkyScan query done: ret=0 az=135.405<-9027 ze=6.495<-11567 Statuses=0009 0008 09:16:52 Msec=750 True Az=135.405 Ze=6.495 Az status=0009 Ze status=0008 09:16:52 Check angles 09:16:52 SkyScan query 09:16:53 SkyScan query done: ret=0 az=117.855<-7857 ze=6.495<-11567 Statuses=0009 0008 09:16:53 Msec=1500 True Az=117.855 Ze=6.495 Az status=0009 Ze status=0008 09:16:53 Check angles 09:16:53 SkyScan query 09:16:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:16:53 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:16:53 Message to Master queued w/err=0: serial=46553 error=0 09:16:58 Received message from Master: op=Filter serial=46554 09:16:58 Color wheel filter change from 0 to 0 09:16:58 FLIGetFilterPos err=0 currentPosition=0 09:16:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:58 Filter is already there-color wheel unchanged 09:16:59 Received message from Master: op=Shutter serial=46555 09:16:59 Shutter LASER close 09:16:59 Received message from Camera: op=State serial=46557 09:16:59 GetSingleValue result=40 Value=cccccccc 09:16:59 SkyScan query 09:16:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:16:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:59 Parameters OK 09:16:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:59 Set A/D data flow result=40 09:16:59 Set A/D channel type result=40 09:16:59 Set A/D encoding result=40 09:16:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:59 Set channel filter=0.000000e+000 result=40 09:16:59 Config A/D Result=40 09:16:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:59 Get A/D filter: -9.255963e+061 result=40 09:16:59 Get A/D value=-858993460 result=40 09:16:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:59 Parameters OK 09:16:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:59 Set A/D data flow result=40 09:16:59 Set A/D channel type result=40 09:16:59 Set A/D encoding result=40 09:16:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:59 Set channel filter=0.000000e+000 result=40 09:16:59 Config A/D Result=40 09:16:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:59 Get A/D filter: -9.255963e+061 result=40 09:16:59 Get A/D value=-858993460 result=40 09:16:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:59 Aux= 09:16:59 Message to Camera, serial 46557 queued 09:17:36 Received message from Master: op=PointingHead serial=46570 09:17:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:17:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:17:37 Point started: ret=0 09:17:37 point_skyscan result=0 09:17:37 Check angles 09:17:37 SkyScan query 09:17:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 09:17:38 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 09:17:38 Check angles 09:17:38 SkyScan query 09:17:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 09:17:39 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 09:17:39 Check angles 09:17:39 SkyScan query 09:17:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 09:17:39 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 09:17:40 Check angles 09:17:40 SkyScan query 09:17:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 09:17:40 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 09:17:40 Check angles 09:17:40 SkyScan query 09:17:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 09:17:41 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 09:17:41 Check angles 09:17:41 SkyScan query 09:17:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 09:17:42 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 09:17:42 Check angles 09:17:42 SkyScan query 09:17:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.73<-21982 Statuses=0008 0009 09:17:42 Msec=4500 True Az=112.995 Ze=-149.73 Az status=0008 Ze status=0009 09:17:43 Check angles 09:17:43 SkyScan query 09:17:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 09:17:43 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 09:17:43 Check angles 09:17:43 SkyScan query 09:17:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:17:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:17:44 Message to Master queued w/err=0: serial=46570 error=0 09:17:49 Received message from Master: op=Filter serial=46571 09:17:49 Color wheel filter change from 0 to 0 09:17:49 FLIGetFilterPos err=0 currentPosition=0 09:17:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:49 Filter is already there-color wheel unchanged 09:17:49 Received message from Master: op=Shutter serial=46572 09:17:49 Shutter LASER open 09:17:49 Received message from Camera: op=State serial=46574 09:17:49 GetSingleValue result=40 Value=cccccccc 09:17:49 SkyScan query 09:17:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:17:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:50 Parameters OK 09:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:50 Set A/D data flow result=40 09:17:50 Set A/D channel type result=40 09:17:50 Set A/D encoding result=40 09:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:50 Set channel filter=0.000000e+000 result=40 09:17:50 Config A/D Result=40 09:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:50 Get A/D filter: -9.255963e+061 result=40 09:17:50 Get A/D value=-858993460 result=40 09:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:50 Parameters OK 09:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:50 Set A/D data flow result=40 09:17:50 Set A/D channel type result=40 09:17:50 Set A/D encoding result=40 09:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:50 Set channel filter=0.000000e+000 result=40 09:17:50 Config A/D Result=40 09:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:50 Get A/D filter: -9.255963e+061 result=40 09:17:50 Get A/D value=-858993460 result=40 09:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:50 Aux= 09:17:50 Message to Camera, serial 46574 queued 09:17:58 Received message from Master: op=Shutter serial=46584 09:17:58 Shutter LASER close 09:17:59 Received message from Master: op=PointingHead serial=46588 09:17:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:17:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:17:59 Point started: ret=0 09:17:59 point_skyscan result=0 09:18:00 Check angles 09:18:00 SkyScan query 09:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 09:18:00 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 09:18:00 Check angles 09:18:00 SkyScan query 09:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 09:18:01 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 09:18:01 Check angles 09:18:01 SkyScan query 09:18:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.31<-18754 Statuses=0008 0009 09:18:02 Msec=1500 True Az=112.995 Ze=-101.31 Az status=0008 Ze status=0009 09:18:02 Check angles 09:18:02 SkyScan query 09:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.355<-17357 Statuses=0008 0009 09:18:03 Msec=2250 True Az=112.995 Ze=-80.355 Az status=0008 Ze status=0009 09:18:03 Check angles 09:18:03 SkyScan query 09:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.415<-15961 Statuses=0008 0009 09:18:03 Msec=3000 True Az=112.995 Ze=-59.415 Az status=0008 Ze status=0009 09:18:03 Check angles 09:18:03 SkyScan query 09:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.445<-14563 Statuses=0008 0009 09:18:04 Msec=3750 True Az=112.995 Ze=-38.445 Az status=0008 Ze status=0009 09:18:04 Check angles 09:18:04 SkyScan query 09:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.49<-13166 Statuses=0008 0009 09:18:05 Msec=4500 True Az=112.995 Ze=-17.49 Az status=0008 Ze status=0009 09:18:05 Check angles 09:18:05 SkyScan query 09:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=3.465<-11769 Statuses=0008 0009 09:18:06 Msec=5250 True Az=112.995 Ze=3.465 Az status=0008 Ze status=0009 09:18:06 Check angles 09:18:06 SkyScan query 09:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:18:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:18:06 Message to Master queued w/err=0: serial=46588 error=0 09:18:11 Received message from Master: op=Filter serial=46589 09:18:11 Color wheel filter change from 0 to 0 09:18:11 FLIGetFilterPos err=0 currentPosition=0 09:18:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:11 Filter is already there-color wheel unchanged 09:18:11 Received message from Master: op=Shutter serial=46590 09:18:11 Shutter LASER close 09:18:12 Received message from Camera: op=State serial=46592 09:18:12 GetSingleValue result=40 Value=cccccccc 09:18:12 SkyScan query 09:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:18:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:12 Parameters OK 09:18:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:12 Set A/D data flow result=40 09:18:12 Set A/D channel type result=40 09:18:12 Set A/D encoding result=40 09:18:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:12 Set channel filter=0.000000e+000 result=40 09:18:12 Config A/D Result=40 09:18:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:12 Get A/D filter: -9.255963e+061 result=40 09:18:12 Get A/D value=-858993460 result=40 09:18:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:12 Parameters OK 09:18:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:12 Set A/D data flow result=40 09:18:12 Set A/D channel type result=40 09:18:12 Set A/D encoding result=40 09:18:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:12 Set channel filter=0.000000e+000 result=40 09:18:12 Config A/D Result=40 09:18:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:12 Get A/D filter: -9.255963e+061 result=40 09:18:12 Get A/D value=-858993460 result=40 09:18:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:12 Aux= 09:18:12 Message to Camera, serial 46592 queued 09:18:49 Received message from Master: op=PointingHead serial=46605 09:18:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:18:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:18:49 Point started: ret=0 09:18:49 point_skyscan result=0 09:18:50 Check angles 09:18:50 SkyScan query 09:18:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:18:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:18:51 Message to Master queued w/err=0: serial=46605 error=0 09:18:56 Received message from Master: op=Filter serial=46606 09:18:56 Color wheel filter change from 0 to 0 09:18:56 FLIGetFilterPos err=0 currentPosition=0 09:18:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:56 Filter is already there-color wheel unchanged 09:18:56 Received message from Master: op=Shutter serial=46607 09:18:56 Shutter LASER close 09:18:56 Received message from Camera: op=State serial=46609 09:18:56 GetSingleValue result=40 Value=cccccccc 09:18:56 SkyScan query 09:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:18:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:57 Parameters OK 09:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:57 Set A/D data flow result=40 09:18:57 Set A/D channel type result=40 09:18:57 Set A/D encoding result=40 09:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:57 Set channel filter=0.000000e+000 result=40 09:18:57 Config A/D Result=40 09:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:57 Get A/D filter: -9.255963e+061 result=40 09:18:57 Get A/D value=-858993460 result=40 09:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:57 Parameters OK 09:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:57 Set A/D data flow result=40 09:18:57 Set A/D channel type result=40 09:18:57 Set A/D encoding result=40 09:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:57 Set channel filter=0.000000e+000 result=40 09:18:57 Config A/D Result=40 09:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:57 Get A/D filter: -9.255963e+061 result=40 09:18:57 Get A/D value=-858993460 result=40 09:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:57 Aux= 09:18:57 Message to Camera, serial 46609 queued 09:19:33 Received message from Master: op=PointingHead serial=46622 09:19:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:19:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:19:34 Point started: ret=0 09:19:34 point_skyscan result=0 09:19:34 Check angles 09:19:34 SkyScan query 09:19:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:19:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:19:35 Message to Master queued w/err=0: serial=46622 error=0 09:19:40 Received message from Master: op=Filter serial=46623 09:19:40 Color wheel filter change from 0 to 0 09:19:40 FLIGetFilterPos err=0 currentPosition=0 09:19:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:40 Filter is already there-color wheel unchanged 09:19:40 Received message from Master: op=Shutter serial=46624 09:19:40 Shutter LASER close 09:19:40 Received message from Camera: op=State serial=46626 09:19:40 GetSingleValue result=40 Value=cccccccc 09:19:40 SkyScan query 09:19:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:19:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:41 Parameters OK 09:19:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:41 Set A/D data flow result=40 09:19:41 Set A/D channel type result=40 09:19:41 Set A/D encoding result=40 09:19:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:41 Set channel filter=0.000000e+000 result=40 09:19:41 Config A/D Result=40 09:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:41 Get A/D filter: -9.255963e+061 result=40 09:19:41 Get A/D value=-858993460 result=40 09:19:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:41 Parameters OK 09:19:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:41 Set A/D data flow result=40 09:19:41 Set A/D channel type result=40 09:19:41 Set A/D encoding result=40 09:19:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:41 Set channel filter=0.000000e+000 result=40 09:19:41 Config A/D Result=40 09:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:41 Get A/D filter: -9.255963e+061 result=40 09:19:41 Get A/D value=-858993460 result=40 09:19:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:41 Aux= 09:19:41 Message to Camera, serial 46626 queued 09:20:18 Received message from Master: op=PointingHead serial=46639 09:20:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:20:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:20:18 Point started: ret=0 09:20:18 point_skyscan result=0 09:20:19 Check angles 09:20:19 SkyScan query 09:20:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:20:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:20:19 Message to Master queued w/err=0: serial=46639 error=0 09:20:24 Received message from Master: op=Filter serial=46640 09:20:24 Color wheel filter change from 0 to 0 09:20:24 FLIGetFilterPos err=0 currentPosition=0 09:20:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:24 Filter is already there-color wheel unchanged 09:20:24 Received message from Master: op=Shutter serial=46641 09:20:24 Shutter LASER close 09:20:25 Received message from Camera: op=State serial=46643 09:20:25 GetSingleValue result=40 Value=cccccccc 09:20:25 SkyScan query 09:20:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:20:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:25 Parameters OK 09:20:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:25 Set A/D data flow result=40 09:20:25 Set A/D channel type result=40 09:20:25 Set A/D encoding result=40 09:20:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:25 Set channel filter=0.000000e+000 result=40 09:20:25 Config A/D Result=40 09:20:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:25 Get A/D filter: -9.255963e+061 result=40 09:20:25 Get A/D value=-858993460 result=40 09:20:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:25 Parameters OK 09:20:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:25 Set A/D data flow result=40 09:20:25 Set A/D channel type result=40 09:20:25 Set A/D encoding result=40 09:20:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:25 Set channel filter=0.000000e+000 result=40 09:20:25 Config A/D Result=40 09:20:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:25 Get A/D filter: -9.255963e+061 result=40 09:20:25 Get A/D value=-858993460 result=40 09:20:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:25 Aux= 09:20:25 Message to Camera, serial 46643 queued 09:21:02 Received message from Master: op=PointingHead serial=46656 09:21:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:21:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:21:02 Point started: ret=0 09:21:02 point_skyscan result=0 09:21:03 Check angles 09:21:03 SkyScan query 09:21:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 09:21:04 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 09:21:04 Check angles 09:21:04 SkyScan query 09:21:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 09:21:04 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 09:21:05 Check angles 09:21:05 SkyScan query 09:21:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 09:21:05 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 09:21:05 Check angles 09:21:05 SkyScan query 09:21:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 09:21:06 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 09:21:06 Check angles 09:21:06 SkyScan query 09:21:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.595<-19173 Statuses=0008 0009 09:21:07 Msec=3000 True Az=112.995 Ze=-107.595 Az status=0008 Ze status=0009 09:21:07 Check angles 09:21:07 SkyScan query 09:21:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.955<-20597 Statuses=0008 0009 09:21:07 Msec=3750 True Az=112.995 Ze=-128.955 Az status=0008 Ze status=0009 09:21:08 Check angles 09:21:08 SkyScan query 09:21:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.925<-21995 Statuses=0008 0009 09:21:08 Msec=4500 True Az=112.995 Ze=-149.925 Az status=0008 Ze status=0009 09:21:08 Check angles 09:21:08 SkyScan query 09:21:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.805<-23387 Statuses=0008 0009 09:21:09 Msec=5250 True Az=112.995 Ze=-170.805 Az status=0008 Ze status=0009 09:21:09 Check angles 09:21:09 SkyScan query 09:21:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:21:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:21:10 Message to Master queued w/err=0: serial=46656 error=0 09:21:15 Received message from Master: op=Filter serial=46657 09:21:15 Color wheel filter change from 0 to 0 09:21:15 FLIGetFilterPos err=0 currentPosition=0 09:21:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:15 Filter is already there-color wheel unchanged 09:21:15 Received message from Master: op=Shutter serial=46658 09:21:15 Shutter LASER open 09:21:15 Received message from Camera: op=State serial=46660 09:21:15 GetSingleValue result=40 Value=cccccccc 09:21:15 SkyScan query 09:21:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:21:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:16 Parameters OK 09:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:16 Set A/D data flow result=40 09:21:16 Set A/D channel type result=40 09:21:16 Set A/D encoding result=40 09:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:16 Set channel filter=0.000000e+000 result=40 09:21:16 Config A/D Result=40 09:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:16 Get A/D filter: -9.255963e+061 result=40 09:21:16 Get A/D value=-858993460 result=40 09:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:16 Parameters OK 09:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:16 Set A/D data flow result=40 09:21:16 Set A/D channel type result=40 09:21:16 Set A/D encoding result=40 09:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:16 Set channel filter=0.000000e+000 result=40 09:21:16 Config A/D Result=40 09:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:16 Get A/D filter: -9.255963e+061 result=40 09:21:16 Get A/D value=-858993460 result=40 09:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:16 Aux= 09:21:16 Message to Camera, serial 46660 queued 09:21:24 Received message from Master: op=Shutter serial=46670 09:21:24 Shutter LASER close 09:21:25 Received message from Master: op=PointingHead serial=46674 09:21:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:21:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:21:25 Point started: ret=0 09:21:25 point_skyscan result=0 09:21:26 Check angles 09:21:26 SkyScan query 09:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.77<-21518 Statuses=0008 0009 09:21:26 Msec=0 True Az=112.995 Ze=-142.77 Az status=0008 Ze status=0009 09:21:27 Check angles 09:21:27 SkyScan query 09:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.395<-20093 Statuses=0008 0009 09:21:27 Msec=750 True Az=112.995 Ze=-121.395 Az status=0008 Ze status=0009 09:21:27 Check angles 09:21:27 SkyScan query 09:21:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.425<-18695 Statuses=0008 0009 09:21:28 Msec=1500 True Az=112.995 Ze=-100.425 Az status=0008 Ze status=0009 09:21:28 Check angles 09:21:28 SkyScan query 09:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.455<-17297 Statuses=0008 0009 09:21:29 Msec=2250 True Az=112.995 Ze=-79.455 Az status=0008 Ze status=0009 09:21:29 Check angles 09:21:29 SkyScan query 09:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.5<-15900 Statuses=0008 0009 09:21:29 Msec=3000 True Az=112.995 Ze=-58.5 Az status=0008 Ze status=0009 09:21:30 Check angles 09:21:30 SkyScan query 09:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 09:21:30 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 09:21:30 Check angles 09:21:30 SkyScan query 09:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.575<-13105 Statuses=0008 0009 09:21:31 Msec=4500 True Az=112.995 Ze=-16.575 Az status=0008 Ze status=0009 09:21:31 Check angles 09:21:31 SkyScan query 09:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.305<-11713 Statuses=0008 0009 09:21:32 Msec=5250 True Az=112.995 Ze=4.305 Az status=0008 Ze status=0009 09:21:32 Check angles 09:21:32 SkyScan query 09:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:21:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:21:32 Message to Master queued w/err=0: serial=46674 error=0 09:21:37 Received message from Master: op=Filter serial=46675 09:21:37 Color wheel filter change from 0 to 0 09:21:37 FLIGetFilterPos err=0 currentPosition=0 09:21:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:37 Filter is already there-color wheel unchanged 09:21:38 Received message from Master: op=Shutter serial=46676 09:21:38 Shutter LASER close 09:21:38 Received message from Camera: op=State serial=46678 09:21:38 GetSingleValue result=40 Value=cccccccc 09:21:38 SkyScan query 09:21:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:21:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:38 Parameters OK 09:21:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:38 Set A/D data flow result=40 09:21:38 Set A/D channel type result=40 09:21:38 Set A/D encoding result=40 09:21:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:38 Set channel filter=0.000000e+000 result=40 09:21:38 Config A/D Result=40 09:21:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:38 Get A/D filter: -9.255963e+061 result=40 09:21:38 Get A/D value=-858993460 result=40 09:21:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:38 Parameters OK 09:21:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:38 Set A/D data flow result=40 09:21:38 Set A/D channel type result=40 09:21:38 Set A/D encoding result=40 09:21:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:38 Set channel filter=0.000000e+000 result=40 09:21:38 Config A/D Result=40 09:21:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:38 Get A/D filter: -9.255963e+061 result=40 09:21:38 Get A/D value=-858993460 result=40 09:21:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:38 Aux= 09:21:38 Message to Camera, serial 46678 queued 09:22:15 Received message from Master: op=PointingHead serial=46691 09:22:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:22:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:22:15 Point started: ret=0 09:22:15 point_skyscan result=0 09:22:16 Check angles 09:22:16 SkyScan query 09:22:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:22:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:22:17 Message to Master queued w/err=0: serial=46691 error=0 09:22:22 Received message from Master: op=Filter serial=46692 09:22:22 Color wheel filter change from 0 to 0 09:22:22 FLIGetFilterPos err=0 currentPosition=0 09:22:22 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:22 Filter is already there-color wheel unchanged 09:22:22 Received message from Master: op=Shutter serial=46693 09:22:22 Shutter LASER close 09:22:22 Received message from Camera: op=State serial=46695 09:22:22 GetSingleValue result=40 Value=cccccccc 09:22:22 SkyScan query 09:22:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:22:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:23 Parameters OK 09:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:23 Set A/D data flow result=40 09:22:23 Set A/D channel type result=40 09:22:23 Set A/D encoding result=40 09:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:23 Set channel filter=0.000000e+000 result=40 09:22:23 Config A/D Result=40 09:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:23 Get A/D filter: -9.255963e+061 result=40 09:22:23 Get A/D value=-858993460 result=40 09:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:23 Parameters OK 09:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:23 Set A/D data flow result=40 09:22:23 Set A/D channel type result=40 09:22:23 Set A/D encoding result=40 09:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:23 Set channel filter=0.000000e+000 result=40 09:22:23 Config A/D Result=40 09:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:23 Get A/D filter: -9.255963e+061 result=40 09:22:23 Get A/D value=-858993460 result=40 09:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:23 Aux= 09:22:23 Message to Camera, serial 46695 queued 09:22:59 Received message from Master: op=PointingHead serial=46708 09:22:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:22:59 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:23:00 Point started: ret=0 09:23:00 point_skyscan result=0 09:23:01 Check angles 09:23:01 SkyScan query 09:23:01 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 09:23:01 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 09:23:01 Check angles 09:23:01 SkyScan query 09:23:02 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.495<-12433 Statuses=0009 0008 09:23:02 Msec=750 True Az=153.78 Ze=-6.495 Az status=0009 Ze status=0008 09:23:02 Check angles 09:23:02 SkyScan query 09:23:03 SkyScan query done: ret=0 az=171.57<-11438 ze=-6.495<-12433 Statuses=0009 0008 09:23:03 Msec=1500 True Az=171.57 Ze=-6.495 Az status=0009 Ze status=0008 09:23:03 Check angles 09:23:03 SkyScan query 09:23:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:23:03 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:23:03 Message to Master queued w/err=0: serial=46708 error=0 09:23:08 Received message from Master: op=Filter serial=46709 09:23:08 Color wheel filter change from 0 to 0 09:23:08 FLIGetFilterPos err=0 currentPosition=0 09:23:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:08 Filter is already there-color wheel unchanged 09:23:09 Received message from Master: op=Shutter serial=46710 09:23:09 Shutter LASER close 09:23:09 Received message from Camera: op=State serial=46712 09:23:09 GetSingleValue result=40 Value=cccccccc 09:23:09 SkyScan query 09:23:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:23:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:09 Parameters OK 09:23:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:09 Set A/D data flow result=40 09:23:09 Set A/D channel type result=40 09:23:09 Set A/D encoding result=40 09:23:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:09 Set channel filter=0.000000e+000 result=40 09:23:09 Config A/D Result=40 09:23:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:09 Get A/D filter: -9.255963e+061 result=40 09:23:09 Get A/D value=-858993460 result=40 09:23:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:09 Parameters OK 09:23:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:09 Set A/D data flow result=40 09:23:09 Set A/D channel type result=40 09:23:09 Set A/D encoding result=40 09:23:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:09 Set channel filter=0.000000e+000 result=40 09:23:09 Config A/D Result=40 09:23:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:09 Get A/D filter: -9.255963e+061 result=40 09:23:09 Get A/D value=-858993460 result=40 09:23:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:09 Aux= 09:23:09 Message to Camera, serial 46712 queued 09:23:46 Received message from Master: op=PointingHead serial=46725 09:23:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:23:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:23:46 Point started: ret=0 09:23:46 point_skyscan result=0 09:23:47 Check angles 09:23:47 SkyScan query 09:23:48 SkyScan query done: ret=0 az=153.195<-10213 ze=6.51<-11566 Statuses=0009 0008 09:23:48 Msec=0 True Az=153.195 Ze=6.51 Az status=0009 Ze status=0008 09:23:48 Check angles 09:23:48 SkyScan query 09:23:48 SkyScan query done: ret=0 az=135.765<-9051 ze=6.495<-11567 Statuses=0009 0008 09:23:48 Msec=750 True Az=135.765 Ze=6.495 Az status=0009 Ze status=0008 09:23:49 Check angles 09:23:49 SkyScan query 09:23:49 SkyScan query done: ret=0 az=117.915<-7861 ze=6.495<-11567 Statuses=0009 0008 09:23:49 Msec=1500 True Az=117.915 Ze=6.495 Az status=0009 Ze status=0008 09:23:49 Check angles 09:23:49 SkyScan query 09:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:23:50 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:23:50 Message to Master queued w/err=0: serial=46725 error=0 [UTC 2019-3-1 09:23:50] 09:23:55 Received message from Master: op=Filter serial=46726 09:23:55 Color wheel filter change from 0 to 0 09:23:55 FLIGetFilterPos err=0 currentPosition=0 09:23:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:55 Filter is already there-color wheel unchanged 09:23:55 Received message from Master: op=Shutter serial=46727 09:23:55 Shutter LASER close 09:23:55 Received message from Camera: op=State serial=46729 09:23:55 GetSingleValue result=40 Value=cccccccc 09:23:55 SkyScan query 09:23:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:23:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:56 Parameters OK 09:23:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:56 Set A/D data flow result=40 09:23:56 Set A/D channel type result=40 09:23:56 Set A/D encoding result=40 09:23:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:56 Set channel filter=0.000000e+000 result=40 09:23:56 Config A/D Result=40 09:23:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:56 Get A/D filter: -9.255963e+061 result=40 09:23:56 Get A/D value=-858993460 result=40 09:23:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:56 Parameters OK 09:23:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:56 Set A/D data flow result=40 09:23:56 Set A/D channel type result=40 09:23:56 Set A/D encoding result=40 09:23:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:56 Set channel filter=0.000000e+000 result=40 09:23:56 Config A/D Result=40 09:23:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:56 Get A/D filter: -9.255963e+061 result=40 09:23:56 Get A/D value=-858993460 result=40 09:23:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:56 Aux= 09:23:56 Message to Camera, serial 46729 queued 09:24:33 Received message from Master: op=PointingHead serial=46742 09:24:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:24:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:24:33 Point started: ret=0 09:24:33 point_skyscan result=0 09:24:34 Check angles 09:24:34 SkyScan query 09:24:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 09:24:34 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 09:24:34 Check angles 09:24:34 SkyScan query 09:24:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 09:24:35 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 09:24:35 Check angles 09:24:35 SkyScan query 09:24:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 09:24:36 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 09:24:36 Check angles 09:24:36 SkyScan query 09:24:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 09:24:36 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 09:24:37 Check angles 09:24:37 SkyScan query 09:24:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.13<-19142 Statuses=0008 0009 09:24:37 Msec=3000 True Az=112.995 Ze=-107.13 Az status=0008 Ze status=0009 09:24:37 Check angles 09:24:37 SkyScan query 09:24:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.085<-20539 Statuses=0008 0009 09:24:38 Msec=3750 True Az=112.995 Ze=-128.085 Az status=0008 Ze status=0009 09:24:38 Check angles 09:24:38 SkyScan query 09:24:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.04<-21936 Statuses=0008 0009 09:24:39 Msec=4500 True Az=112.995 Ze=-149.04 Az status=0008 Ze status=0009 09:24:39 Check angles 09:24:39 SkyScan query 09:24:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.995<-23333 Statuses=0008 0009 09:24:39 Msec=5250 True Az=112.995 Ze=-169.995 Az status=0008 Ze status=0009 09:24:40 Check angles 09:24:40 SkyScan query 09:24:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:24:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:24:40 Message to Master queued w/err=0: serial=46742 error=0 09:24:45 Received message from Master: op=Filter serial=46743 09:24:45 Color wheel filter change from 0 to 0 09:24:45 FLIGetFilterPos err=0 currentPosition=0 09:24:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:45 Filter is already there-color wheel unchanged 09:24:45 Received message from Master: op=Shutter serial=46744 09:24:45 Shutter LASER open 09:24:46 Received message from Camera: op=State serial=46746 09:24:46 GetSingleValue result=40 Value=cccccccc 09:24:46 SkyScan query 09:24:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:24:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:46 Parameters OK 09:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:46 Set A/D data flow result=40 09:24:46 Set A/D channel type result=40 09:24:46 Set A/D encoding result=40 09:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:46 Set channel filter=0.000000e+000 result=40 09:24:46 Config A/D Result=40 09:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:46 Get A/D filter: -9.255963e+061 result=40 09:24:46 Get A/D value=-858993460 result=40 09:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:46 Parameters OK 09:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:46 Set A/D data flow result=40 09:24:46 Set A/D channel type result=40 09:24:46 Set A/D encoding result=40 09:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:46 Set channel filter=0.000000e+000 result=40 09:24:46 Config A/D Result=40 09:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:46 Get A/D filter: -9.255963e+061 result=40 09:24:46 Get A/D value=-858993460 result=40 09:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:46 Aux= 09:24:46 Message to Camera, serial 46746 queued 09:24:55 Received message from Master: op=Shutter serial=46756 09:24:55 Shutter LASER close 09:24:55 Received message from Master: op=PointingHead serial=46760 09:24:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:24:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:24:55 Point started: ret=0 09:24:55 point_skyscan result=0 09:24:56 Check angles 09:24:56 SkyScan query 09:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 09:24:57 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 09:24:57 Check angles 09:24:57 SkyScan query 09:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 09:24:57 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 09:24:58 Check angles 09:24:58 SkyScan query 09:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 09:24:58 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 09:24:58 Check angles 09:24:58 SkyScan query 09:24:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 09:24:59 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 09:24:59 Check angles 09:24:59 SkyScan query 09:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 09:25:00 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 09:25:00 Check angles 09:25:00 SkyScan query 09:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 09:25:00 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 09:25:01 Check angles 09:25:01 SkyScan query 09:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.77<-13118 Statuses=0008 0009 09:25:01 Msec=4500 True Az=112.995 Ze=-16.77 Az status=0008 Ze status=0009 09:25:01 Check angles 09:25:01 SkyScan query 09:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=4.155<-11723 Statuses=0008 0009 09:25:02 Msec=5250 True Az=112.995 Ze=4.155 Az status=0008 Ze status=0009 09:25:02 Check angles 09:25:02 SkyScan query 09:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:25:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:25:03 Message to Master queued w/err=0: serial=46760 error=0 09:25:08 Received message from Master: op=Filter serial=46761 09:25:08 Color wheel filter change from 0 to 0 09:25:08 FLIGetFilterPos err=0 currentPosition=0 09:25:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:08 Filter is already there-color wheel unchanged 09:25:08 Received message from Master: op=Shutter serial=46762 09:25:08 Shutter LASER close 09:25:08 Received message from Camera: op=State serial=46764 09:25:08 GetSingleValue result=40 Value=cccccccc 09:25:08 SkyScan query 09:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:25:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:09 Parameters OK 09:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:09 Set A/D data flow result=40 09:25:09 Set A/D channel type result=40 09:25:09 Set A/D encoding result=40 09:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:09 Set channel filter=0.000000e+000 result=40 09:25:09 Config A/D Result=40 09:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:09 Get A/D filter: -9.255963e+061 result=40 09:25:09 Get A/D value=-858993460 result=40 09:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:09 Parameters OK 09:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:09 Set A/D data flow result=40 09:25:09 Set A/D channel type result=40 09:25:09 Set A/D encoding result=40 09:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:09 Set channel filter=0.000000e+000 result=40 09:25:09 Config A/D Result=40 09:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:09 Get A/D filter: -9.255963e+061 result=40 09:25:09 Get A/D value=-858993460 result=40 09:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:09 Aux= 09:25:09 Message to Camera, serial 46764 queued 09:25:45 Received message from Master: op=PointingHead serial=46777 09:25:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:25:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:25:46 Point started: ret=0 09:25:46 point_skyscan result=0 09:25:47 Check angles 09:25:47 SkyScan query 09:25:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:25:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:25:47 Message to Master queued w/err=0: serial=46777 error=0 09:25:52 Received message from Master: op=Filter serial=46778 09:25:52 Color wheel filter change from 0 to 0 09:25:52 FLIGetFilterPos err=0 currentPosition=0 09:25:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:52 Filter is already there-color wheel unchanged 09:25:52 Received message from Master: op=Shutter serial=46779 09:25:52 Shutter LASER close 09:25:52 Received message from Camera: op=State serial=46781 09:25:52 GetSingleValue result=40 Value=cccccccc 09:25:52 SkyScan query 09:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:25:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:53 Parameters OK 09:25:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:53 Set A/D data flow result=40 09:25:53 Set A/D channel type result=40 09:25:53 Set A/D encoding result=40 09:25:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:53 Set channel filter=0.000000e+000 result=40 09:25:53 Config A/D Result=40 09:25:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:53 Get A/D filter: -9.255963e+061 result=40 09:25:53 Get A/D value=-858993460 result=40 09:25:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:53 Parameters OK 09:25:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:53 Set A/D data flow result=40 09:25:53 Set A/D channel type result=40 09:25:53 Set A/D encoding result=40 09:25:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:53 Set channel filter=0.000000e+000 result=40 09:25:53 Config A/D Result=40 09:25:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:53 Get A/D filter: -9.255963e+061 result=40 09:25:53 Get A/D value=-858993460 result=40 09:25:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:53 Aux= 09:25:53 Message to Camera, serial 46781 queued 09:26:30 Received message from Master: op=PointingHead serial=46794 09:26:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:26:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:26:30 Point started: ret=0 09:26:30 point_skyscan result=0 09:26:31 Check angles 09:26:31 SkyScan query 09:26:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:26:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:26:31 Message to Master queued w/err=0: serial=46794 error=0 09:26:36 Received message from Master: op=Filter serial=46795 09:26:36 Color wheel filter change from 0 to 0 09:26:36 FLIGetFilterPos err=0 currentPosition=0 09:26:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:36 Filter is already there-color wheel unchanged 09:26:37 Received message from Master: op=Shutter serial=46796 09:26:37 Shutter LASER close 09:26:37 Received message from Camera: op=State serial=46798 09:26:37 GetSingleValue result=40 Value=cccccccc 09:26:37 SkyScan query 09:26:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:26:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:37 Parameters OK 09:26:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:37 Set A/D data flow result=40 09:26:37 Set A/D channel type result=40 09:26:37 Set A/D encoding result=40 09:26:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:37 Set channel filter=0.000000e+000 result=40 09:26:37 Config A/D Result=40 09:26:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:37 Get A/D filter: -9.255963e+061 result=40 09:26:37 Get A/D value=-858993460 result=40 09:26:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:37 Parameters OK 09:26:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:37 Set A/D data flow result=40 09:26:37 Set A/D channel type result=40 09:26:37 Set A/D encoding result=40 09:26:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:37 Set channel filter=0.000000e+000 result=40 09:26:37 Config A/D Result=40 09:26:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:37 Get A/D filter: -9.255963e+061 result=40 09:26:37 Get A/D value=-858993460 result=40 09:26:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:37 Aux= 09:26:37 Message to Camera, serial 46798 queued 09:27:14 Received message from Master: op=PointingHead serial=46811 09:27:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:27:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:27:14 Point started: ret=0 09:27:14 point_skyscan result=0 09:27:15 Check angles 09:27:15 SkyScan query 09:27:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:27:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:27:16 Message to Master queued w/err=0: serial=46811 error=0 09:27:21 Received message from Master: op=Filter serial=46812 09:27:21 Color wheel filter change from 0 to 0 09:27:21 FLIGetFilterPos err=0 currentPosition=0 09:27:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:21 Filter is already there-color wheel unchanged 09:27:21 Received message from Master: op=Shutter serial=46813 09:27:21 Shutter LASER close 09:27:21 Received message from Camera: op=State serial=46815 09:27:21 GetSingleValue result=40 Value=cccccccc 09:27:21 SkyScan query 09:27:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:27:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:22 Parameters OK 09:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:22 Set A/D data flow result=40 09:27:22 Set A/D channel type result=40 09:27:22 Set A/D encoding result=40 09:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:22 Set channel filter=0.000000e+000 result=40 09:27:22 Config A/D Result=40 09:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:22 Get A/D filter: -9.255963e+061 result=40 09:27:22 Get A/D value=-858993460 result=40 09:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:22 Parameters OK 09:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:22 Set A/D data flow result=40 09:27:22 Set A/D channel type result=40 09:27:22 Set A/D encoding result=40 09:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:22 Set channel filter=0.000000e+000 result=40 09:27:22 Config A/D Result=40 09:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:22 Get A/D filter: -9.255963e+061 result=40 09:27:22 Get A/D value=-858993460 result=40 09:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:22 Aux= 09:27:22 Message to Camera, serial 46815 queued 09:27:58 Received message from Master: op=PointingHead serial=46828 09:27:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:27:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:27:59 Point started: ret=0 09:27:59 point_skyscan result=0 09:28:00 Check angles 09:28:00 SkyScan query 09:28:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 09:28:00 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 09:28:00 Check angles 09:28:00 SkyScan query 09:28:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 09:28:01 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 09:28:01 Check angles 09:28:01 SkyScan query 09:28:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 09:28:02 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 09:28:02 Check angles 09:28:02 SkyScan query 09:28:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 09:28:02 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 09:28:03 Check angles 09:28:03 SkyScan query 09:28:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 09:28:03 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 09:28:03 Check angles 09:28:03 SkyScan query 09:28:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.97<-20598 Statuses=0008 0009 09:28:04 Msec=3750 True Az=112.995 Ze=-128.97 Az status=0008 Ze status=0009 09:28:04 Check angles 09:28:04 SkyScan query 09:28:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.94<-21996 Statuses=0008 0009 09:28:05 Msec=4500 True Az=112.995 Ze=-149.94 Az status=0008 Ze status=0009 09:28:05 Check angles 09:28:05 SkyScan query 09:28:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.82<-23388 Statuses=0008 0009 09:28:05 Msec=5250 True Az=112.995 Ze=-170.82 Az status=0008 Ze status=0009 09:28:06 Check angles 09:28:06 SkyScan query 09:28:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:28:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:28:06 Message to Master queued w/err=0: serial=46828 error=0 09:28:11 Received message from Master: op=Filter serial=46829 09:28:11 Color wheel filter change from 0 to 0 09:28:11 FLIGetFilterPos err=0 currentPosition=0 09:28:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:11 Filter is already there-color wheel unchanged 09:28:11 Received message from Master: op=Shutter serial=46830 09:28:11 Shutter LASER open 09:28:11 Received message from Camera: op=State serial=46832 09:28:11 GetSingleValue result=40 Value=cccccccc 09:28:11 SkyScan query 09:28:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:28:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:12 Parameters OK 09:28:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:12 Set A/D data flow result=40 09:28:12 Set A/D channel type result=40 09:28:12 Set A/D encoding result=40 09:28:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:12 Set channel filter=0.000000e+000 result=40 09:28:12 Config A/D Result=40 09:28:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:12 Get A/D filter: -9.255963e+061 result=40 09:28:12 Get A/D value=-858993460 result=40 09:28:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:12 Parameters OK 09:28:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:12 Set A/D data flow result=40 09:28:12 Set A/D channel type result=40 09:28:12 Set A/D encoding result=40 09:28:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:12 Set channel filter=0.000000e+000 result=40 09:28:12 Config A/D Result=40 09:28:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:12 Get A/D filter: -9.255963e+061 result=40 09:28:12 Get A/D value=-858993460 result=40 09:28:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:12 Aux= 09:28:12 Message to Camera, serial 46832 queued 09:28:20 Received message from Master: op=Shutter serial=46842 09:28:20 Shutter LASER close 09:28:21 Received message from Master: op=PointingHead serial=46846 09:28:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:28:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:28:21 Point started: ret=0 09:28:21 point_skyscan result=0 09:28:22 Check angles 09:28:22 SkyScan query 09:28:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 09:28:23 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 09:28:23 Check angles 09:28:23 SkyScan query 09:28:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 09:28:23 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 09:28:24 Check angles 09:28:24 SkyScan query 09:28:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.34<-18756 Statuses=0008 0009 09:28:24 Msec=1500 True Az=112.995 Ze=-101.34 Az status=0008 Ze status=0009 09:28:24 Check angles 09:28:24 SkyScan query 09:28:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.385<-17359 Statuses=0008 0009 09:28:25 Msec=2250 True Az=112.995 Ze=-80.385 Az status=0008 Ze status=0009 09:28:25 Check angles 09:28:25 SkyScan query 09:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 09:28:26 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 09:28:26 Check angles 09:28:26 SkyScan query 09:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 09:28:27 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 09:28:27 Check angles 09:28:27 SkyScan query 09:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.2<-13080 Statuses=0008 0009 09:28:27 Msec=4500 True Az=112.995 Ze=-16.2 Az status=0008 Ze status=0009 09:28:27 Check angles 09:28:27 SkyScan query 09:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 09:28:28 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 09:28:28 Check angles 09:28:28 SkyScan query 09:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:28:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:28:29 Message to Master queued w/err=0: serial=46846 error=0 09:28:34 Received message from Master: op=Filter serial=46847 09:28:34 Color wheel filter change from 0 to 0 09:28:34 FLIGetFilterPos err=0 currentPosition=0 09:28:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:34 Filter is already there-color wheel unchanged 09:28:34 Received message from Master: op=Shutter serial=46848 09:28:34 Shutter LASER close 09:28:34 Received message from Camera: op=State serial=46850 09:28:34 GetSingleValue result=40 Value=cccccccc 09:28:34 SkyScan query 09:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:28:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:35 Parameters OK 09:28:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:35 Set A/D data flow result=40 09:28:35 Set A/D channel type result=40 09:28:35 Set A/D encoding result=40 09:28:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:35 Set channel filter=0.000000e+000 result=40 09:28:35 Config A/D Result=40 09:28:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:35 Get A/D filter: -9.255963e+061 result=40 09:28:35 Get A/D value=-858993460 result=40 09:28:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:35 Parameters OK 09:28:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:35 Set A/D data flow result=40 09:28:35 Set A/D channel type result=40 09:28:35 Set A/D encoding result=40 09:28:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:35 Set channel filter=0.000000e+000 result=40 09:28:35 Config A/D Result=40 09:28:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:35 Get A/D filter: -9.255963e+061 result=40 09:28:35 Get A/D value=-858993460 result=40 09:28:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:35 Aux= 09:28:35 Message to Camera, serial 46850 queued 09:29:12 Received message from Master: op=PointingHead serial=46863 09:29:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:29:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:29:12 Point started: ret=0 09:29:12 point_skyscan result=0 09:29:13 Check angles 09:29:13 SkyScan query 09:29:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:29:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:29:13 Message to Master queued w/err=0: serial=46863 error=0 09:29:18 Received message from Master: op=Filter serial=46864 09:29:18 Color wheel filter change from 0 to 0 09:29:18 FLIGetFilterPos err=0 currentPosition=0 09:29:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:18 Filter is already there-color wheel unchanged 09:29:18 Received message from Master: op=Shutter serial=46865 09:29:18 Shutter LASER close 09:29:18 Received message from Camera: op=State serial=46867 09:29:18 GetSingleValue result=40 Value=cccccccc 09:29:18 SkyScan query 09:29:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:29:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:19 Parameters OK 09:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:19 Set A/D data flow result=40 09:29:19 Set A/D channel type result=40 09:29:19 Set A/D encoding result=40 09:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:19 Set channel filter=0.000000e+000 result=40 09:29:19 Config A/D Result=40 09:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:19 Get A/D filter: -9.255963e+061 result=40 09:29:19 Get A/D value=-858993460 result=40 09:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:19 Parameters OK 09:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:19 Set A/D data flow result=40 09:29:19 Set A/D channel type result=40 09:29:19 Set A/D encoding result=40 09:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:19 Set channel filter=0.000000e+000 result=40 09:29:19 Config A/D Result=40 09:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:19 Get A/D filter: -9.255963e+061 result=40 09:29:19 Get A/D value=-858993460 result=40 09:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:19 Aux= 09:29:19 Message to Camera, serial 46867 queued 09:29:56 Received message from Master: op=PointingHead serial=46880 09:29:56 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:29:56 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:29:56 Point started: ret=0 09:29:56 point_skyscan result=0 09:29:57 Check angles 09:29:57 SkyScan query 09:29:57 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 09:29:57 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 09:29:58 Check angles 09:29:58 SkyScan query 09:29:58 SkyScan query done: ret=0 az=153.675<-10245 ze=-6.495<-12433 Statuses=0009 0008 09:29:58 Msec=750 True Az=153.675 Ze=-6.495 Az status=0009 Ze status=0008 09:29:58 Check angles 09:29:58 SkyScan query 09:29:59 SkyScan query done: ret=0 az=171.195<-11413 ze=-6.495<-12433 Statuses=0009 0008 09:29:59 Msec=1500 True Az=171.195 Ze=-6.495 Az status=0009 Ze status=0008 09:29:59 Check angles 09:29:59 SkyScan query 09:30:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:30:00 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:30:00 Message to Master queued w/err=0: serial=46880 error=0 09:30:05 Received message from Master: op=Filter serial=46881 09:30:05 Color wheel filter change from 0 to 0 09:30:05 FLIGetFilterPos err=0 currentPosition=0 09:30:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:05 Filter is already there-color wheel unchanged 09:30:05 Received message from Master: op=Shutter serial=46882 09:30:05 Shutter LASER close 09:30:05 Received message from Camera: op=State serial=46884 09:30:05 GetSingleValue result=40 Value=cccccccc 09:30:05 SkyScan query 09:30:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:30:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:06 Parameters OK 09:30:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:06 Set A/D data flow result=40 09:30:06 Set A/D channel type result=40 09:30:06 Set A/D encoding result=40 09:30:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:06 Set channel filter=0.000000e+000 result=40 09:30:06 Config A/D Result=40 09:30:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:06 Get A/D filter: -9.255963e+061 result=40 09:30:06 Get A/D value=-858993460 result=40 09:30:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:06 Parameters OK 09:30:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:06 Set A/D data flow result=40 09:30:06 Set A/D channel type result=40 09:30:06 Set A/D encoding result=40 09:30:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:06 Set channel filter=0.000000e+000 result=40 09:30:06 Config A/D Result=40 09:30:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:06 Get A/D filter: -9.255963e+061 result=40 09:30:06 Get A/D value=-858993460 result=40 09:30:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:06 Aux= 09:30:06 Message to Camera, serial 46884 queued 09:30:42 Received message from Master: op=PointingHead serial=46897 09:30:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:30:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:30:43 Point started: ret=0 09:30:43 point_skyscan result=0 09:30:44 Check angles 09:30:44 SkyScan query 09:30:44 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 09:30:44 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 09:30:44 Check angles 09:30:44 SkyScan query 09:30:45 SkyScan query done: ret=0 az=135.195<-9013 ze=6.495<-11567 Statuses=0009 0008 09:30:45 Msec=750 True Az=135.195 Ze=6.495 Az status=0009 Ze status=0008 09:30:45 Check angles 09:30:45 SkyScan query 09:30:46 SkyScan query done: ret=0 az=117.69<-7846 ze=6.495<-11567 Statuses=0009 0008 09:30:46 Msec=1500 True Az=117.69 Ze=6.495 Az status=0009 Ze status=0008 09:30:46 Check angles 09:30:46 SkyScan query 09:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:30:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:30:46 Message to Master queued w/err=0: serial=46897 error=0 09:30:51 Received message from Master: op=Filter serial=46898 09:30:51 Color wheel filter change from 0 to 0 09:30:51 FLIGetFilterPos err=0 currentPosition=0 09:30:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:51 Filter is already there-color wheel unchanged 09:30:52 Received message from Master: op=Shutter serial=46899 09:30:52 Shutter LASER close 09:30:52 Received message from Camera: op=State serial=46901 09:30:52 GetSingleValue result=40 Value=cccccccc 09:30:52 SkyScan query 09:30:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:30:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:52 Parameters OK 09:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:52 Set A/D data flow result=40 09:30:52 Set A/D channel type result=40 09:30:52 Set A/D encoding result=40 09:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:52 Set channel filter=0.000000e+000 result=40 09:30:52 Config A/D Result=40 09:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:52 Get A/D filter: -9.255963e+061 result=40 09:30:52 Get A/D value=-858993460 result=40 09:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:52 Parameters OK 09:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:52 Set A/D data flow result=40 09:30:52 Set A/D channel type result=40 09:30:52 Set A/D encoding result=40 09:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:52 Set channel filter=0.000000e+000 result=40 09:30:52 Config A/D Result=40 09:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:52 Get A/D filter: -9.255963e+061 result=40 09:30:52 Get A/D value=-858993460 result=40 09:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:52 Aux= 09:30:52 Message to Camera, serial 46901 queued 09:31:29 Received message from Master: op=PointingHead serial=46914 09:31:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:31:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:31:29 Point started: ret=0 09:31:29 point_skyscan result=0 09:31:30 Check angles 09:31:30 SkyScan query 09:31:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 09:31:31 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 09:31:31 Check angles 09:31:31 SkyScan query 09:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 09:31:32 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 09:31:32 Check angles 09:31:32 SkyScan query 09:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 09:31:32 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 09:31:32 Check angles 09:31:32 SkyScan query 09:31:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 09:31:33 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 09:31:33 Check angles 09:31:33 SkyScan query 09:31:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.49<-19166 Statuses=0008 0009 09:31:34 Msec=3000 True Az=112.995 Ze=-107.49 Az status=0008 Ze status=0009 09:31:34 Check angles 09:31:34 SkyScan query 09:31:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.85<-20590 Statuses=0008 0009 09:31:35 Msec=3750 True Az=112.995 Ze=-128.85 Az status=0008 Ze status=0009 09:31:35 Check angles 09:31:35 SkyScan query 09:31:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.82<-21988 Statuses=0008 0009 09:31:35 Msec=4500 True Az=112.995 Ze=-149.82 Az status=0008 Ze status=0009 09:31:35 Check angles 09:31:35 SkyScan query 09:31:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.715<-23381 Statuses=0008 0009 09:31:36 Msec=5250 True Az=112.995 Ze=-170.715 Az status=0008 Ze status=0009 09:31:36 Check angles 09:31:36 SkyScan query 09:31:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:31:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:31:37 Message to Master queued w/err=0: serial=46914 error=0 09:31:42 Received message from Master: op=Filter serial=46915 09:31:42 Color wheel filter change from 0 to 0 09:31:42 FLIGetFilterPos err=0 currentPosition=0 09:31:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:42 Filter is already there-color wheel unchanged 09:31:42 Received message from Master: op=Shutter serial=46916 09:31:42 Shutter LASER open 09:31:42 Received message from Camera: op=State serial=46918 09:31:42 GetSingleValue result=40 Value=cccccccc 09:31:42 SkyScan query 09:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:31:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:43 Parameters OK 09:31:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:43 Set A/D data flow result=40 09:31:43 Set A/D channel type result=40 09:31:43 Set A/D encoding result=40 09:31:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:43 Set channel filter=0.000000e+000 result=40 09:31:43 Config A/D Result=40 09:31:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:43 Get A/D filter: -9.255963e+061 result=40 09:31:43 Get A/D value=-858993460 result=40 09:31:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:43 Parameters OK 09:31:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:43 Set A/D data flow result=40 09:31:43 Set A/D channel type result=40 09:31:43 Set A/D encoding result=40 09:31:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:43 Set channel filter=0.000000e+000 result=40 09:31:43 Config A/D Result=40 09:31:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:43 Get A/D filter: -9.255963e+061 result=40 09:31:43 Get A/D value=-858993460 result=40 09:31:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:43 Aux= 09:31:43 Message to Camera, serial 46918 queued 09:31:51 Received message from Master: op=Shutter serial=46928 09:31:51 Shutter LASER close 09:31:52 Received message from Master: op=PointingHead serial=46932 09:31:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:31:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:31:52 Point started: ret=0 09:31:52 point_skyscan result=0 09:31:53 Check angles 09:31:53 SkyScan query 09:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 09:31:53 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 09:31:53 Check angles 09:31:53 SkyScan query 09:31:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 09:31:54 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 09:31:54 Check angles 09:31:54 SkyScan query 09:31:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 09:31:55 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 09:31:55 Check angles 09:31:55 SkyScan query 09:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 09:31:56 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 09:31:56 Check angles 09:31:56 SkyScan query 09:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 09:31:56 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 09:31:56 Check angles 09:31:56 SkyScan query 09:31:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 09:31:57 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 09:31:57 Check angles 09:31:57 SkyScan query 09:31:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 09:31:58 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 09:31:58 Check angles 09:31:58 SkyScan query 09:31:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.26<-11716 Statuses=0008 0009 09:31:59 Msec=5250 True Az=112.995 Ze=4.26 Az status=0008 Ze status=0009 09:31:59 Check angles 09:31:59 SkyScan query 09:31:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:31:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:31:59 Message to Master queued w/err=0: serial=46932 error=0 09:32:04 Received message from Master: op=Filter serial=46933 09:32:04 Color wheel filter change from 0 to 0 09:32:04 FLIGetFilterPos err=0 currentPosition=0 09:32:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:04 Filter is already there-color wheel unchanged 09:32:04 Received message from Master: op=Shutter serial=46934 09:32:04 Shutter LASER close 09:32:05 Received message from Camera: op=State serial=46936 09:32:05 GetSingleValue result=40 Value=cccccccc 09:32:05 SkyScan query 09:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:32:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:05 Parameters OK 09:32:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:05 Set A/D data flow result=40 09:32:05 Set A/D channel type result=40 09:32:05 Set A/D encoding result=40 09:32:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:05 Set channel filter=0.000000e+000 result=40 09:32:05 Config A/D Result=40 09:32:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:05 Get A/D filter: -9.255963e+061 result=40 09:32:05 Get A/D value=-858993460 result=40 09:32:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:05 Parameters OK 09:32:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:05 Set A/D data flow result=40 09:32:05 Set A/D channel type result=40 09:32:05 Set A/D encoding result=40 09:32:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:05 Set channel filter=0.000000e+000 result=40 09:32:05 Config A/D Result=40 09:32:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:05 Get A/D filter: -9.255963e+061 result=40 09:32:05 Get A/D value=-858993460 result=40 09:32:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:05 Aux= 09:32:05 Message to Camera, serial 46936 queued 09:32:42 Received message from Master: op=PointingHead serial=46949 09:32:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:32:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:32:42 Point started: ret=0 09:32:42 point_skyscan result=0 09:32:43 Check angles 09:32:43 SkyScan query 09:32:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:32:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:32:44 Message to Master queued w/err=0: serial=46949 error=0 09:32:49 Received message from Master: op=Filter serial=46950 09:32:49 Color wheel filter change from 0 to 0 09:32:49 FLIGetFilterPos err=0 currentPosition=0 09:32:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:49 Filter is already there-color wheel unchanged 09:32:49 Received message from Master: op=Shutter serial=46951 09:32:49 Shutter LASER close 09:32:49 Received message from Camera: op=State serial=46953 09:32:49 GetSingleValue result=40 Value=cccccccc 09:32:49 SkyScan query 09:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:32:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:49 Parameters OK 09:32:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:49 Set A/D data flow result=40 09:32:49 Set A/D channel type result=40 09:32:49 Set A/D encoding result=40 09:32:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:49 Set channel filter=0.000000e+000 result=40 09:32:49 Config A/D Result=40 09:32:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:49 Get A/D filter: -9.255963e+061 result=40 09:32:49 Get A/D value=-858993460 result=40 09:32:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:49 Parameters OK 09:32:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:49 Set A/D data flow result=40 09:32:49 Set A/D channel type result=40 09:32:49 Set A/D encoding result=40 09:32:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:49 Set channel filter=0.000000e+000 result=40 09:32:49 Config A/D Result=40 09:32:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:49 Get A/D filter: -9.255963e+061 result=40 09:32:49 Get A/D value=-858993460 result=40 09:32:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:49 Aux= 09:32:49 Message to Camera, serial 46953 queued 09:33:26 Received message from Master: op=PointingHead serial=46966 09:33:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:33:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:33:27 Point started: ret=0 09:33:27 point_skyscan result=0 09:33:27 Check angles 09:33:27 SkyScan query 09:33:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:33:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:33:28 Message to Master queued w/err=0: serial=46966 error=0 09:33:33 Received message from Master: op=Filter serial=46967 09:33:33 Color wheel filter change from 0 to 0 09:33:33 FLIGetFilterPos err=0 currentPosition=0 09:33:33 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:33 Filter is already there-color wheel unchanged 09:33:33 Received message from Master: op=Shutter serial=46968 09:33:33 Shutter LASER close 09:33:33 Received message from Camera: op=State serial=46970 09:33:33 GetSingleValue result=40 Value=cccccccc 09:33:33 SkyScan query 09:33:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:33:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:34 Parameters OK 09:33:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:34 Set A/D data flow result=40 09:33:34 Set A/D channel type result=40 09:33:34 Set A/D encoding result=40 09:33:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:34 Set channel filter=0.000000e+000 result=40 09:33:34 Config A/D Result=40 09:33:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:34 Get A/D filter: -9.255963e+061 result=40 09:33:34 Get A/D value=-858993460 result=40 09:33:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:34 Parameters OK 09:33:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:34 Set A/D data flow result=40 09:33:34 Set A/D channel type result=40 09:33:34 Set A/D encoding result=40 09:33:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:34 Set channel filter=0.000000e+000 result=40 09:33:34 Config A/D Result=40 09:33:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:34 Get A/D filter: -9.255963e+061 result=40 09:33:34 Get A/D value=-858993460 result=40 09:33:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:34 Aux= 09:33:34 Message to Camera, serial 46970 queued 09:33:38 Received message from Master: op=Identify serial=46971 09:34:11 Received message from Master: op=PointingHead serial=46986 09:34:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:34:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:34:11 Point started: ret=0 09:34:11 point_skyscan result=0 09:34:12 Check angles 09:34:12 SkyScan query 09:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:34:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:34:12 Message to Master queued w/err=0: serial=46986 error=0 09:34:17 Received message from Master: op=Filter serial=46987 09:34:17 Color wheel filter change from 0 to 0 09:34:17 FLIGetFilterPos err=0 currentPosition=0 09:34:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:17 Filter is already there-color wheel unchanged 09:34:17 Received message from Master: op=Shutter serial=46988 09:34:17 Shutter LASER close 09:34:17 Received message from Camera: op=State serial=46990 09:34:17 GetSingleValue result=40 Value=cccccccc 09:34:17 SkyScan query 09:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 [UTC 2019-3-1 09:34:18] 09:34:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:18 Parameters OK 09:34:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:18 Set A/D data flow result=40 09:34:18 Set A/D channel type result=40 09:34:18 Set A/D encoding result=40 09:34:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:18 Set channel filter=0.000000e+000 result=40 09:34:18 Config A/D Result=40 09:34:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:18 Get A/D filter: -9.255963e+061 result=40 09:34:18 Get A/D value=-858993460 result=40 09:34:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:18 Parameters OK 09:34:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:18 Set A/D data flow result=40 09:34:18 Set A/D channel type result=40 09:34:18 Set A/D encoding result=40 09:34:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:18 Set channel filter=0.000000e+000 result=40 09:34:18 Config A/D Result=40 09:34:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:18 Get A/D filter: -9.255963e+061 result=40 09:34:18 Get A/D value=-858993460 result=40 09:34:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:18 Aux= 09:34:18 Message to Camera, serial 46990 queued 09:34:55 Received message from Master: op=PointingHead serial=47003 09:34:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:34:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:34:55 Point started: ret=0 09:34:55 point_skyscan result=0 09:34:56 Check angles 09:34:56 SkyScan query 09:34:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.55<-13570 Statuses=0008 0009 09:34:57 Msec=0 True Az=112.995 Ze=-23.55 Az status=0008 Ze status=0009 09:34:57 Check angles 09:34:57 SkyScan query 09:34:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.955<-14997 Statuses=0008 0009 09:34:57 Msec=750 True Az=112.995 Ze=-44.955 Az status=0008 Ze status=0009 09:34:58 Check angles 09:34:58 SkyScan query 09:34:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.895<-16393 Statuses=0008 0009 09:34:58 Msec=1500 True Az=112.995 Ze=-65.895 Az status=0008 Ze status=0009 09:34:58 Check angles 09:34:58 SkyScan query 09:34:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.835<-17789 Statuses=0008 0009 09:34:59 Msec=2250 True Az=112.995 Ze=-86.835 Az status=0008 Ze status=0009 09:34:59 Check angles 09:34:59 SkyScan query 09:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.24<-19216 Statuses=0008 0009 09:35:00 Msec=3000 True Az=112.995 Ze=-108.24 Az status=0008 Ze status=0009 09:35:00 Check angles 09:35:00 SkyScan query 09:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.615<-20641 Statuses=0008 0009 09:35:00 Msec=3750 True Az=112.995 Ze=-129.615 Az status=0008 Ze status=0009 09:35:01 Check angles 09:35:01 SkyScan query 09:35:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.555<-22037 Statuses=0008 0009 09:35:01 Msec=4500 True Az=112.995 Ze=-150.555 Az status=0008 Ze status=0009 09:35:01 Check angles 09:35:01 SkyScan query 09:35:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.315<-23421 Statuses=0008 0009 09:35:02 Msec=5250 True Az=112.995 Ze=-171.315 Az status=0008 Ze status=0009 09:35:02 Check angles 09:35:02 SkyScan query 09:35:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:35:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:35:03 Message to Master queued w/err=0: serial=47003 error=0 09:35:08 Received message from Master: op=Filter serial=47004 09:35:08 Color wheel filter change from 0 to 0 09:35:08 FLIGetFilterPos err=0 currentPosition=0 09:35:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:08 Filter is already there-color wheel unchanged 09:35:08 Received message from Master: op=Shutter serial=47005 09:35:08 Shutter LASER open 09:35:08 Received message from Camera: op=State serial=47007 09:35:08 GetSingleValue result=40 Value=cccccccc 09:35:08 SkyScan query 09:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:35:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:09 Parameters OK 09:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:09 Set A/D data flow result=40 09:35:09 Set A/D channel type result=40 09:35:09 Set A/D encoding result=40 09:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:09 Set channel filter=0.000000e+000 result=40 09:35:09 Config A/D Result=40 09:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:09 Get A/D filter: -9.255963e+061 result=40 09:35:09 Get A/D value=-858993460 result=40 09:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:09 Parameters OK 09:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:09 Set A/D data flow result=40 09:35:09 Set A/D channel type result=40 09:35:09 Set A/D encoding result=40 09:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:09 Set channel filter=0.000000e+000 result=40 09:35:09 Config A/D Result=40 09:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:09 Get A/D filter: -9.255963e+061 result=40 09:35:09 Get A/D value=-858993460 result=40 09:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:09 Aux= 09:35:09 Message to Camera, serial 47007 queued 09:35:17 Received message from Master: op=Shutter serial=47017 09:35:17 Shutter LASER close 09:35:18 Received message from Master: op=PointingHead serial=47021 09:35:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:35:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:35:18 Point started: ret=0 09:35:18 point_skyscan result=0 09:35:19 Check angles 09:35:19 SkyScan query 09:35:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 09:35:19 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 09:35:20 Check angles 09:35:20 SkyScan query 09:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 09:35:20 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 09:35:20 Check angles 09:35:20 SkyScan query 09:35:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.425<-18695 Statuses=0008 0009 09:35:21 Msec=1500 True Az=112.995 Ze=-100.425 Az status=0008 Ze status=0009 09:35:21 Check angles 09:35:21 SkyScan query 09:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.02<-17268 Statuses=0008 0009 09:35:22 Msec=2250 True Az=112.995 Ze=-79.02 Az status=0008 Ze status=0009 09:35:22 Check angles 09:35:22 SkyScan query 09:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.065<-15871 Statuses=0008 0009 09:35:22 Msec=3000 True Az=112.995 Ze=-58.065 Az status=0008 Ze status=0009 09:35:23 Check angles 09:35:23 SkyScan query 09:35:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.125<-14475 Statuses=0008 0009 09:35:23 Msec=3750 True Az=112.995 Ze=-37.125 Az status=0008 Ze status=0009 09:35:23 Check angles 09:35:23 SkyScan query 09:35:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.14<-13076 Statuses=0008 0009 09:35:24 Msec=4500 True Az=112.995 Ze=-16.14 Az status=0008 Ze status=0009 09:35:24 Check angles 09:35:24 SkyScan query 09:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=4.65<-11690 Statuses=0008 0009 09:35:25 Msec=5250 True Az=112.995 Ze=4.65 Az status=0008 Ze status=0009 09:35:25 Check angles 09:35:25 SkyScan query 09:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:35:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:35:25 Message to Master queued w/err=0: serial=47021 error=0 09:35:30 Received message from Master: op=Filter serial=47022 09:35:30 Color wheel filter change from 0 to 0 09:35:30 FLIGetFilterPos err=0 currentPosition=0 09:35:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:30 Filter is already there-color wheel unchanged 09:35:31 Received message from Master: op=Shutter serial=47023 09:35:31 Shutter LASER close 09:35:31 Received message from Camera: op=State serial=47025 09:35:31 GetSingleValue result=40 Value=cccccccc 09:35:31 SkyScan query 09:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:35:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:31 Parameters OK 09:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:31 Set A/D data flow result=40 09:35:31 Set A/D channel type result=40 09:35:31 Set A/D encoding result=40 09:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:31 Set channel filter=0.000000e+000 result=40 09:35:31 Config A/D Result=40 09:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:31 Get A/D filter: -9.255963e+061 result=40 09:35:31 Get A/D value=-858993460 result=40 09:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:31 Parameters OK 09:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:31 Set A/D data flow result=40 09:35:31 Set A/D channel type result=40 09:35:31 Set A/D encoding result=40 09:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:31 Set channel filter=0.000000e+000 result=40 09:35:31 Config A/D Result=40 09:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:31 Get A/D filter: -9.255963e+061 result=40 09:35:31 Get A/D value=-858993460 result=40 09:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:31 Aux= 09:35:31 Message to Camera, serial 47025 queued 09:36:08 Received message from Master: op=PointingHead serial=47038 09:36:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:36:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:36:09 Point started: ret=0 09:36:09 point_skyscan result=0 09:36:09 Check angles 09:36:09 SkyScan query 09:36:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:36:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:36:10 Message to Master queued w/err=0: serial=47038 error=0 09:36:15 Received message from Master: op=Filter serial=47039 09:36:15 Color wheel filter change from 0 to 0 09:36:15 FLIGetFilterPos err=0 currentPosition=0 09:36:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:15 Filter is already there-color wheel unchanged 09:36:15 Received message from Master: op=Shutter serial=47040 09:36:15 Shutter LASER close 09:36:15 Received message from Camera: op=State serial=47042 09:36:15 GetSingleValue result=40 Value=cccccccc 09:36:15 SkyScan query 09:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:36:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:16 Parameters OK 09:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:16 Set A/D data flow result=40 09:36:16 Set A/D channel type result=40 09:36:16 Set A/D encoding result=40 09:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:16 Set channel filter=0.000000e+000 result=40 09:36:16 Config A/D Result=40 09:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:16 Get A/D filter: -9.255963e+061 result=40 09:36:16 Get A/D value=-858993460 result=40 09:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:16 Parameters OK 09:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:16 Set A/D data flow result=40 09:36:16 Set A/D channel type result=40 09:36:16 Set A/D encoding result=40 09:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:16 Set channel filter=0.000000e+000 result=40 09:36:16 Config A/D Result=40 09:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:16 Get A/D filter: -9.255963e+061 result=40 09:36:16 Get A/D value=-858993460 result=40 09:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:16 Aux= 09:36:16 Message to Camera, serial 47042 queued 09:36:52 Received message from Master: op=PointingHead serial=47055 09:36:52 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:36:52 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:36:53 Point started: ret=0 09:36:53 point_skyscan result=0 09:36:54 Check angles 09:36:54 SkyScan query 09:36:54 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 09:36:54 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 09:36:54 Check angles 09:36:54 SkyScan query 09:36:55 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 09:36:55 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 09:36:55 Check angles 09:36:55 SkyScan query 09:36:56 SkyScan query done: ret=0 az=171.09<-11406 ze=-6.495<-12433 Statuses=0009 0008 09:36:56 Msec=1500 True Az=171.09 Ze=-6.495 Az status=0009 Ze status=0008 09:36:56 Check angles 09:36:56 SkyScan query 09:36:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:36:56 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:36:56 Message to Master queued w/err=0: serial=47055 error=0 09:37:01 Received message from Master: op=Filter serial=47056 09:37:01 Color wheel filter change from 0 to 0 09:37:01 FLIGetFilterPos err=0 currentPosition=0 09:37:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:01 Filter is already there-color wheel unchanged 09:37:02 Received message from Master: op=Shutter serial=47057 09:37:02 Shutter LASER close 09:37:02 Received message from Camera: op=State serial=47059 09:37:02 GetSingleValue result=40 Value=cccccccc 09:37:02 SkyScan query 09:37:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:37:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:02 Parameters OK 09:37:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:02 Set A/D data flow result=40 09:37:02 Set A/D channel type result=40 09:37:02 Set A/D encoding result=40 09:37:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:02 Set channel filter=0.000000e+000 result=40 09:37:02 Config A/D Result=40 09:37:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:02 Get A/D filter: -9.255963e+061 result=40 09:37:02 Get A/D value=-858993460 result=40 09:37:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:02 Parameters OK 09:37:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:02 Set A/D data flow result=40 09:37:02 Set A/D channel type result=40 09:37:02 Set A/D encoding result=40 09:37:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:02 Set channel filter=0.000000e+000 result=40 09:37:02 Config A/D Result=40 09:37:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:02 Get A/D filter: -9.255963e+061 result=40 09:37:02 Get A/D value=-858993460 result=40 09:37:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:02 Aux= 09:37:02 Message to Camera, serial 47059 queued 09:37:39 Received message from Master: op=PointingHead serial=47072 09:37:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:37:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:37:39 Point started: ret=0 09:37:39 point_skyscan result=0 09:37:40 Check angles 09:37:40 SkyScan query 09:37:41 SkyScan query done: ret=0 az=152.925<-10195 ze=6.51<-11566 Statuses=0009 0008 09:37:41 Msec=0 True Az=152.925 Ze=6.51 Az status=0009 Ze status=0008 09:37:41 Check angles 09:37:41 SkyScan query 09:37:41 SkyScan query done: ret=0 az=135.18<-9012 ze=6.495<-11567 Statuses=0009 0008 09:37:41 Msec=750 True Az=135.18 Ze=6.495 Az status=0009 Ze status=0008 09:37:42 Check angles 09:37:42 SkyScan query 09:37:42 SkyScan query done: ret=0 az=117.75<-7850 ze=6.495<-11567 Statuses=0009 0008 09:37:42 Msec=1500 True Az=117.75 Ze=6.495 Az status=0009 Ze status=0008 09:37:42 Check angles 09:37:42 SkyScan query 09:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:37:43 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:37:43 Message to Master queued w/err=0: serial=47072 error=0 09:37:48 Received message from Master: op=Filter serial=47073 09:37:48 Color wheel filter change from 0 to 0 09:37:48 FLIGetFilterPos err=0 currentPosition=0 09:37:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:48 Filter is already there-color wheel unchanged 09:37:48 Received message from Master: op=Shutter serial=47074 09:37:48 Shutter LASER close 09:37:48 Received message from Camera: op=State serial=47076 09:37:48 GetSingleValue result=40 Value=cccccccc 09:37:48 SkyScan query 09:37:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:37:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:49 Parameters OK 09:37:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:49 Set A/D data flow result=40 09:37:49 Set A/D channel type result=40 09:37:49 Set A/D encoding result=40 09:37:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:49 Set channel filter=0.000000e+000 result=40 09:37:49 Config A/D Result=40 09:37:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:49 Get A/D filter: -9.255963e+061 result=40 09:37:49 Get A/D value=-858993460 result=40 09:37:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:49 Parameters OK 09:37:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:49 Set A/D data flow result=40 09:37:49 Set A/D channel type result=40 09:37:49 Set A/D encoding result=40 09:37:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:49 Set channel filter=0.000000e+000 result=40 09:37:49 Config A/D Result=40 09:37:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:49 Get A/D filter: -9.255963e+061 result=40 09:37:49 Get A/D value=-858993460 result=40 09:37:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:49 Aux= 09:37:49 Message to Camera, serial 47076 queued 09:38:26 Received message from Master: op=PointingHead serial=47089 09:38:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:38:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:38:26 Point started: ret=0 09:38:26 point_skyscan result=0 09:38:27 Check angles 09:38:27 SkyScan query 09:38:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 09:38:27 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 09:38:27 Check angles 09:38:27 SkyScan query 09:38:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.235<-14949 Statuses=0008 0009 09:38:28 Msec=750 True Az=112.995 Ze=-44.235 Az status=0008 Ze status=0009 09:38:28 Check angles 09:38:28 SkyScan query 09:38:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.175<-16345 Statuses=0008 0009 09:38:29 Msec=1500 True Az=112.995 Ze=-65.175 Az status=0008 Ze status=0009 09:38:29 Check angles 09:38:29 SkyScan query 09:38:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 09:38:29 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 09:38:30 Check angles 09:38:30 SkyScan query 09:38:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.085<-19139 Statuses=0008 0009 09:38:30 Msec=3000 True Az=112.995 Ze=-107.085 Az status=0008 Ze status=0009 09:38:30 Check angles 09:38:30 SkyScan query 09:38:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.055<-20537 Statuses=0008 0009 09:38:31 Msec=3750 True Az=112.995 Ze=-128.055 Az status=0008 Ze status=0009 09:38:31 Check angles 09:38:31 SkyScan query 09:38:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.43<-21962 Statuses=0008 0009 09:38:32 Msec=4500 True Az=112.995 Ze=-149.43 Az status=0008 Ze status=0009 09:38:32 Check angles 09:38:32 SkyScan query 09:38:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.37<-23358 Statuses=0008 0009 09:38:32 Msec=5250 True Az=112.995 Ze=-170.37 Az status=0008 Ze status=0009 09:38:33 Check angles 09:38:33 SkyScan query 09:38:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:38:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:38:33 Message to Master queued w/err=0: serial=47089 error=0 09:38:38 Received message from Master: op=Filter serial=47090 09:38:38 Color wheel filter change from 0 to 0 09:38:38 FLIGetFilterPos err=0 currentPosition=0 09:38:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:38 Filter is already there-color wheel unchanged 09:38:38 Received message from Master: op=Shutter serial=47091 09:38:38 Shutter LASER open 09:38:39 Received message from Camera: op=State serial=47093 09:38:39 GetSingleValue result=40 Value=cccccccc 09:38:39 SkyScan query 09:38:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:38:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:39 Parameters OK 09:38:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:39 Set A/D data flow result=40 09:38:39 Set A/D channel type result=40 09:38:39 Set A/D encoding result=40 09:38:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:39 Set channel filter=0.000000e+000 result=40 09:38:39 Config A/D Result=40 09:38:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:39 Get A/D filter: -9.255963e+061 result=40 09:38:39 Get A/D value=-858993460 result=40 09:38:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:39 Parameters OK 09:38:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:39 Set A/D data flow result=40 09:38:39 Set A/D channel type result=40 09:38:39 Set A/D encoding result=40 09:38:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:39 Set channel filter=0.000000e+000 result=40 09:38:39 Config A/D Result=40 09:38:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:39 Get A/D filter: -9.255963e+061 result=40 09:38:39 Get A/D value=-858993460 result=40 09:38:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:39 Aux= 09:38:39 Message to Camera, serial 47093 queued 09:38:48 Received message from Master: op=Shutter serial=47103 09:38:48 Shutter LASER close 09:38:48 Received message from Master: op=PointingHead serial=47107 09:38:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:38:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:38:48 Point started: ret=0 09:38:48 point_skyscan result=0 09:38:49 Check angles 09:38:49 SkyScan query 09:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 09:38:50 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 09:38:50 Check angles 09:38:50 SkyScan query 09:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.455<-20097 Statuses=0008 0009 09:38:50 Msec=750 True Az=112.995 Ze=-121.455 Az status=0008 Ze status=0009 09:38:51 Check angles 09:38:51 SkyScan query 09:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 09:38:51 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 09:38:51 Check angles 09:38:51 SkyScan query 09:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.53<-17302 Statuses=0008 0009 09:38:52 Msec=2250 True Az=112.995 Ze=-79.53 Az status=0008 Ze status=0009 09:38:52 Check angles 09:38:52 SkyScan query 09:38:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.11<-15874 Statuses=0008 0009 09:38:53 Msec=3000 True Az=112.995 Ze=-58.11 Az status=0008 Ze status=0009 09:38:53 Check angles 09:38:53 SkyScan query 09:38:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.75<-14450 Statuses=0008 0009 09:38:54 Msec=3750 True Az=112.995 Ze=-36.75 Az status=0008 Ze status=0009 09:38:54 Check angles 09:38:54 SkyScan query 09:38:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.78<-13052 Statuses=0008 0009 09:38:54 Msec=4500 True Az=112.995 Ze=-15.78 Az status=0008 Ze status=0009 09:38:54 Check angles 09:38:54 SkyScan query 09:38:55 SkyScan query done: ret=0 az=112.995<-7533 ze=5.205<-11653 Statuses=0008 0009 09:38:55 Msec=5250 True Az=112.995 Ze=5.205 Az status=0008 Ze status=0009 09:38:55 Check angles 09:38:55 SkyScan query 09:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:38:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:38:56 Message to Master queued w/err=0: serial=47107 error=0 09:39:01 Received message from Master: op=Filter serial=47108 09:39:01 Color wheel filter change from 0 to 0 09:39:01 FLIGetFilterPos err=0 currentPosition=0 09:39:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:01 Filter is already there-color wheel unchanged 09:39:01 Received message from Master: op=Shutter serial=47109 09:39:01 Shutter LASER close 09:39:01 Received message from Camera: op=State serial=47111 09:39:01 GetSingleValue result=40 Value=cccccccc 09:39:01 SkyScan query 09:39:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:39:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:02 Parameters OK 09:39:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:02 Set A/D data flow result=40 09:39:02 Set A/D channel type result=40 09:39:02 Set A/D encoding result=40 09:39:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:02 Set channel filter=0.000000e+000 result=40 09:39:02 Config A/D Result=40 09:39:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:02 Get A/D filter: -9.255963e+061 result=40 09:39:02 Get A/D value=-858993460 result=40 09:39:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:02 Parameters OK 09:39:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:02 Set A/D data flow result=40 09:39:02 Set A/D channel type result=40 09:39:02 Set A/D encoding result=40 09:39:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:02 Set channel filter=0.000000e+000 result=40 09:39:02 Config A/D Result=40 09:39:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:02 Get A/D filter: -9.255963e+061 result=40 09:39:02 Get A/D value=-858993460 result=40 09:39:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:02 Aux= 09:39:02 Message to Camera, serial 47111 queued 09:39:39 Received message from Master: op=PointingHead serial=47124 09:39:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:39:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:39:39 Point started: ret=0 09:39:39 point_skyscan result=0 09:39:40 Check angles 09:39:40 SkyScan query 09:39:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:39:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:39:40 Message to Master queued w/err=0: serial=47124 error=0 09:39:45 Received message from Master: op=Filter serial=47125 09:39:45 Color wheel filter change from 0 to 0 09:39:45 FLIGetFilterPos err=0 currentPosition=0 09:39:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:45 Filter is already there-color wheel unchanged 09:39:45 Received message from Master: op=Shutter serial=47126 09:39:45 Shutter LASER close 09:39:45 Received message from Camera: op=State serial=47128 09:39:45 GetSingleValue result=40 Value=cccccccc 09:39:45 SkyScan query 09:39:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:39:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:46 Parameters OK 09:39:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:46 Set A/D data flow result=40 09:39:46 Set A/D channel type result=40 09:39:46 Set A/D encoding result=40 09:39:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:46 Set channel filter=0.000000e+000 result=40 09:39:46 Config A/D Result=40 09:39:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:46 Get A/D filter: -9.255963e+061 result=40 09:39:46 Get A/D value=-858993460 result=40 09:39:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:46 Parameters OK 09:39:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:46 Set A/D data flow result=40 09:39:46 Set A/D channel type result=40 09:39:46 Set A/D encoding result=40 09:39:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:46 Set channel filter=0.000000e+000 result=40 09:39:46 Config A/D Result=40 09:39:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:46 Get A/D filter: -9.255963e+061 result=40 09:39:46 Get A/D value=-858993460 result=40 09:39:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:46 Aux= 09:39:46 Message to Camera, serial 47128 queued 09:40:23 Received message from Master: op=PointingHead serial=47141 09:40:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:40:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:40:23 Point started: ret=0 09:40:23 point_skyscan result=0 09:40:24 Check angles 09:40:24 SkyScan query 09:40:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:40:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:40:25 Message to Master queued w/err=0: serial=47141 error=0 09:40:30 Received message from Master: op=Filter serial=47142 09:40:30 Color wheel filter change from 0 to 0 09:40:30 FLIGetFilterPos err=0 currentPosition=0 09:40:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:30 Filter is already there-color wheel unchanged 09:40:30 Received message from Master: op=Shutter serial=47143 09:40:30 Shutter LASER close 09:40:30 Received message from Camera: op=State serial=47145 09:40:30 GetSingleValue result=40 Value=cccccccc 09:40:30 SkyScan query 09:40:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:40:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:30 Parameters OK 09:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:30 Set A/D data flow result=40 09:40:30 Set A/D channel type result=40 09:40:30 Set A/D encoding result=40 09:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:30 Set channel filter=0.000000e+000 result=40 09:40:30 Config A/D Result=40 09:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:30 Get A/D filter: -9.255963e+061 result=40 09:40:30 Get A/D value=-858993460 result=40 09:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:30 Parameters OK 09:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:30 Set A/D data flow result=40 09:40:30 Set A/D channel type result=40 09:40:30 Set A/D encoding result=40 09:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:30 Set channel filter=0.000000e+000 result=40 09:40:30 Config A/D Result=40 09:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:30 Get A/D filter: -9.255963e+061 result=40 09:40:30 Get A/D value=-858993460 result=40 09:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:30 Aux= 09:40:30 Message to Camera, serial 47145 queued 09:41:07 Received message from Master: op=PointingHead serial=47158 09:41:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:41:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:41:08 Point started: ret=0 09:41:08 point_skyscan result=0 09:41:08 Check angles 09:41:08 SkyScan query 09:41:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:41:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:41:09 Message to Master queued w/err=0: serial=47158 error=0 09:41:14 Received message from Master: op=Filter serial=47159 09:41:14 Color wheel filter change from 0 to 0 09:41:14 FLIGetFilterPos err=0 currentPosition=0 09:41:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:14 Filter is already there-color wheel unchanged 09:41:14 Received message from Master: op=Shutter serial=47160 09:41:14 Shutter LASER close 09:41:14 Received message from Camera: op=State serial=47162 09:41:14 GetSingleValue result=40 Value=cccccccc 09:41:14 SkyScan query 09:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:41:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:15 Parameters OK 09:41:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:15 Set A/D data flow result=40 09:41:15 Set A/D channel type result=40 09:41:15 Set A/D encoding result=40 09:41:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:15 Set channel filter=0.000000e+000 result=40 09:41:15 Config A/D Result=40 09:41:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:15 Get A/D filter: -9.255963e+061 result=40 09:41:15 Get A/D value=-858993460 result=40 09:41:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:15 Parameters OK 09:41:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:15 Set A/D data flow result=40 09:41:15 Set A/D channel type result=40 09:41:15 Set A/D encoding result=40 09:41:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:15 Set channel filter=0.000000e+000 result=40 09:41:15 Config A/D Result=40 09:41:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:15 Get A/D filter: -9.255963e+061 result=40 09:41:15 Get A/D value=-858993460 result=40 09:41:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:15 Aux= 09:41:15 Message to Camera, serial 47162 queued 09:41:52 Received message from Master: op=PointingHead serial=47175 09:41:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:41:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:41:52 Point started: ret=0 09:41:52 point_skyscan result=0 09:41:53 Check angles 09:41:53 SkyScan query 09:41:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 09:41:53 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 09:41:53 Check angles 09:41:53 SkyScan query 09:41:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.965<-14931 Statuses=0008 0009 09:41:54 Msec=750 True Az=112.995 Ze=-43.965 Az status=0008 Ze status=0009 09:41:54 Check angles 09:41:54 SkyScan query 09:41:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 09:41:55 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 09:41:55 Check angles 09:41:55 SkyScan query 09:41:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 09:41:55 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 09:41:56 Check angles 09:41:56 SkyScan query 09:41:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 09:41:56 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 09:41:56 Check angles 09:41:56 SkyScan query 09:41:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.22<-20548 Statuses=0008 0009 09:41:57 Msec=3750 True Az=112.995 Ze=-128.22 Az status=0008 Ze status=0009 09:41:57 Check angles 09:41:57 SkyScan query 09:41:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.19<-21946 Statuses=0008 0009 09:41:58 Msec=4500 True Az=112.995 Ze=-149.19 Az status=0008 Ze status=0009 09:41:58 Check angles 09:41:58 SkyScan query 09:41:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.13<-23342 Statuses=0008 0009 09:41:58 Msec=5250 True Az=112.995 Ze=-170.13 Az status=0008 Ze status=0009 09:41:59 Check angles 09:41:59 SkyScan query 09:41:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:41:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:41:59 Message to Master queued w/err=0: serial=47175 error=0 09:42:04 Received message from Master: op=Filter serial=47176 09:42:04 Color wheel filter change from 0 to 0 09:42:04 FLIGetFilterPos err=0 currentPosition=0 09:42:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:04 Filter is already there-color wheel unchanged 09:42:04 Received message from Master: op=Shutter serial=47177 09:42:04 Shutter LASER open 09:42:05 Received message from Camera: op=State serial=47179 09:42:05 GetSingleValue result=40 Value=cccccccc 09:42:05 SkyScan query 09:42:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:42:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:05 Parameters OK 09:42:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:05 Set A/D data flow result=40 09:42:05 Set A/D channel type result=40 09:42:05 Set A/D encoding result=40 09:42:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:05 Set channel filter=0.000000e+000 result=40 09:42:05 Config A/D Result=40 09:42:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:05 Get A/D filter: -9.255963e+061 result=40 09:42:05 Get A/D value=-858993460 result=40 09:42:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:05 Parameters OK 09:42:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:05 Set A/D data flow result=40 09:42:05 Set A/D channel type result=40 09:42:05 Set A/D encoding result=40 09:42:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:05 Set channel filter=0.000000e+000 result=40 09:42:05 Config A/D Result=40 09:42:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:05 Get A/D filter: -9.255963e+061 result=40 09:42:05 Get A/D value=-858993460 result=40 09:42:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:05 Aux= 09:42:05 Message to Camera, serial 47179 queued 09:42:14 Received message from Master: op=Shutter serial=47189 09:42:14 Shutter LASER close 09:42:14 Received message from Master: op=PointingHead serial=47193 09:42:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:42:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:42:14 Point started: ret=0 09:42:14 point_skyscan result=0 09:42:15 Check angles 09:42:15 SkyScan query 09:42:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 09:42:16 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 09:42:16 Check angles 09:42:16 SkyScan query 09:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 09:42:17 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 09:42:17 Check angles 09:42:17 SkyScan query 09:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.25<-18750 Statuses=0008 0009 09:42:17 Msec=1500 True Az=112.995 Ze=-101.25 Az status=0008 Ze status=0009 09:42:17 Check angles 09:42:17 SkyScan query 09:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 09:42:18 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 09:42:18 Check angles 09:42:18 SkyScan query 09:42:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.34<-15956 Statuses=0008 0009 09:42:19 Msec=3000 True Az=112.995 Ze=-59.34 Az status=0008 Ze status=0009 09:42:19 Check angles 09:42:19 SkyScan query 09:42:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.37<-14558 Statuses=0008 0009 09:42:20 Msec=3750 True Az=112.995 Ze=-38.37 Az status=0008 Ze status=0009 09:42:20 Check angles 09:42:20 SkyScan query 09:42:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.43<-13162 Statuses=0008 0009 09:42:20 Msec=4500 True Az=112.995 Ze=-17.43 Az status=0008 Ze status=0009 09:42:20 Check angles 09:42:20 SkyScan query 09:42:21 SkyScan query done: ret=0 az=112.995<-7533 ze=3.54<-11764 Statuses=0008 0009 09:42:21 Msec=5250 True Az=112.995 Ze=3.54 Az status=0008 Ze status=0009 09:42:21 Check angles 09:42:21 SkyScan query 09:42:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:42:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:42:22 Message to Master queued w/err=0: serial=47193 error=0 09:42:27 Received message from Master: op=Filter serial=47194 09:42:27 Color wheel filter change from 0 to 0 09:42:27 FLIGetFilterPos err=0 currentPosition=0 09:42:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:27 Filter is already there-color wheel unchanged 09:42:27 Received message from Master: op=Shutter serial=47195 09:42:27 Shutter LASER close 09:42:27 Received message from Camera: op=State serial=47197 09:42:27 GetSingleValue result=40 Value=cccccccc 09:42:27 SkyScan query 09:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:42:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:28 Parameters OK 09:42:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:28 Set A/D data flow result=40 09:42:28 Set A/D channel type result=40 09:42:28 Set A/D encoding result=40 09:42:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:28 Set channel filter=0.000000e+000 result=40 09:42:28 Config A/D Result=40 09:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:28 Get A/D filter: -9.255963e+061 result=40 09:42:28 Get A/D value=-858993460 result=40 09:42:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:28 Parameters OK 09:42:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:28 Set A/D data flow result=40 09:42:28 Set A/D channel type result=40 09:42:28 Set A/D encoding result=40 09:42:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:28 Set channel filter=0.000000e+000 result=40 09:42:28 Config A/D Result=40 09:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:28 Get A/D filter: -9.255963e+061 result=40 09:42:28 Get A/D value=-858993460 result=40 09:42:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:28 Aux= 09:42:28 Message to Camera, serial 47197 queued 09:43:05 Received message from Master: op=PointingHead serial=47210 09:43:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:43:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:43:05 Point started: ret=0 09:43:05 point_skyscan result=0 09:43:06 Check angles 09:43:06 SkyScan query 09:43:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:43:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:43:06 Message to Master queued w/err=0: serial=47210 error=0 09:43:11 Received message from Master: op=Filter serial=47211 09:43:11 Color wheel filter change from 0 to 0 09:43:11 FLIGetFilterPos err=0 currentPosition=0 09:43:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:11 Filter is already there-color wheel unchanged 09:43:11 Received message from Master: op=Shutter serial=47212 09:43:11 Shutter LASER close 09:43:11 Received message from Camera: op=State serial=47214 09:43:11 GetSingleValue result=40 Value=cccccccc 09:43:11 SkyScan query 09:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:43:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:12 Parameters OK 09:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:12 Set A/D data flow result=40 09:43:12 Set A/D channel type result=40 09:43:12 Set A/D encoding result=40 09:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:12 Set channel filter=0.000000e+000 result=40 09:43:12 Config A/D Result=40 09:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:12 Get A/D filter: -9.255963e+061 result=40 09:43:12 Get A/D value=-858993460 result=40 09:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:12 Parameters OK 09:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:12 Set A/D data flow result=40 09:43:12 Set A/D channel type result=40 09:43:12 Set A/D encoding result=40 09:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:12 Set channel filter=0.000000e+000 result=40 09:43:12 Config A/D Result=40 09:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:12 Get A/D filter: -9.255963e+061 result=40 09:43:12 Get A/D value=-858993460 result=40 09:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:12 Aux= 09:43:12 Message to Camera, serial 47214 queued 09:43:49 Received message from Master: op=PointingHead serial=47227 09:43:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:43:49 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:43:49 Point started: ret=0 09:43:49 point_skyscan result=0 [UTC 2019-3-1 09:43:50] 09:43:50 Check angles 09:43:50 SkyScan query 09:43:51 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 09:43:51 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 09:43:51 Check angles 09:43:51 SkyScan query 09:43:51 SkyScan query done: ret=0 az=154.215<-10281 ze=-6.495<-12433 Statuses=0009 0008 09:43:51 Msec=750 True Az=154.215 Ze=-6.495 Az status=0009 Ze status=0008 09:43:51 Check angles 09:43:51 SkyScan query 09:43:52 SkyScan query done: ret=0 az=171.66<-11444 ze=-6.495<-12433 Statuses=0009 0008 09:43:52 Msec=1500 True Az=171.66 Ze=-6.495 Az status=0009 Ze status=0008 09:43:52 Check angles 09:43:52 SkyScan query 09:43:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:43:53 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:43:53 Message to Master queued w/err=0: serial=47227 error=0 09:43:58 Received message from Master: op=Filter serial=47228 09:43:58 Color wheel filter change from 0 to 0 09:43:58 FLIGetFilterPos err=0 currentPosition=0 09:43:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:58 Filter is already there-color wheel unchanged 09:43:58 Received message from Master: op=Shutter serial=47229 09:43:58 Shutter LASER close 09:43:58 Received message from Camera: op=State serial=47231 09:43:58 GetSingleValue result=40 Value=cccccccc 09:43:58 SkyScan query 09:43:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:43:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:59 Parameters OK 09:43:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:59 Set A/D data flow result=40 09:43:59 Set A/D channel type result=40 09:43:59 Set A/D encoding result=40 09:43:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:59 Set channel filter=0.000000e+000 result=40 09:43:59 Config A/D Result=40 09:43:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:59 Get A/D filter: -9.255963e+061 result=40 09:43:59 Get A/D value=-858993460 result=40 09:43:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:59 Parameters OK 09:43:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:59 Set A/D data flow result=40 09:43:59 Set A/D channel type result=40 09:43:59 Set A/D encoding result=40 09:43:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:59 Set channel filter=0.000000e+000 result=40 09:43:59 Config A/D Result=40 09:43:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:59 Get A/D filter: -9.255963e+061 result=40 09:43:59 Get A/D value=-858993460 result=40 09:43:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:59 Aux= 09:43:59 Message to Camera, serial 47231 queued 09:44:35 Received message from Master: op=PointingHead serial=47244 09:44:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:44:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:44:36 Point started: ret=0 09:44:36 point_skyscan result=0 09:44:37 Check angles 09:44:37 SkyScan query 09:44:37 SkyScan query done: ret=0 az=153.195<-10213 ze=6.51<-11566 Statuses=0009 0008 09:44:37 Msec=0 True Az=153.195 Ze=6.51 Az status=0009 Ze status=0008 09:44:37 Check angles 09:44:37 SkyScan query 09:44:38 SkyScan query done: ret=0 az=135.255<-9017 ze=6.495<-11567 Statuses=0009 0008 09:44:38 Msec=750 True Az=135.255 Ze=6.495 Az status=0009 Ze status=0008 09:44:38 Check angles 09:44:38 SkyScan query 09:44:39 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 09:44:39 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 09:44:39 Check angles 09:44:39 SkyScan query 09:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:44:39 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:44:39 Message to Master queued w/err=0: serial=47244 error=0 09:44:44 Received message from Master: op=Filter serial=47245 09:44:44 Color wheel filter change from 0 to 0 09:44:44 FLIGetFilterPos err=0 currentPosition=0 09:44:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:44 Filter is already there-color wheel unchanged 09:44:45 Received message from Master: op=Shutter serial=47246 09:44:45 Shutter LASER close 09:44:45 Received message from Camera: op=State serial=47248 09:44:45 GetSingleValue result=40 Value=cccccccc 09:44:45 SkyScan query 09:44:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:44:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:45 Parameters OK 09:44:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:45 Set A/D data flow result=40 09:44:45 Set A/D channel type result=40 09:44:45 Set A/D encoding result=40 09:44:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:45 Set channel filter=0.000000e+000 result=40 09:44:45 Config A/D Result=40 09:44:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:45 Get A/D filter: -9.255963e+061 result=40 09:44:45 Get A/D value=-858993460 result=40 09:44:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:45 Parameters OK 09:44:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:45 Set A/D data flow result=40 09:44:45 Set A/D channel type result=40 09:44:45 Set A/D encoding result=40 09:44:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:45 Set channel filter=0.000000e+000 result=40 09:44:45 Config A/D Result=40 09:44:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:45 Get A/D filter: -9.255963e+061 result=40 09:44:45 Get A/D value=-858993460 result=40 09:44:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:45 Aux= 09:44:45 Message to Camera, serial 47248 queued 09:45:21 Received message from Master: op=PointingHead serial=47260 09:45:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:45:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:45:21 Point started: ret=0 09:45:21 point_skyscan result=0 09:45:22 Check angles 09:45:22 SkyScan query 09:45:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 09:45:23 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 09:45:23 Check angles 09:45:23 SkyScan query 09:45:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 09:45:24 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 09:45:24 Check angles 09:45:24 SkyScan query 09:45:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 09:45:24 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 09:45:24 Check angles 09:45:24 SkyScan query 09:45:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 09:45:25 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 09:45:25 Check angles 09:45:25 SkyScan query 09:45:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.835<-19189 Statuses=0008 0009 09:45:26 Msec=3000 True Az=112.995 Ze=-107.835 Az status=0008 Ze status=0009 09:45:26 Check angles 09:45:26 SkyScan query 09:45:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.76<-20584 Statuses=0008 0009 09:45:27 Msec=3750 True Az=112.995 Ze=-128.76 Az status=0008 Ze status=0009 09:45:27 Check angles 09:45:27 SkyScan query 09:45:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.165<-22011 Statuses=0008 0009 09:45:27 Msec=4500 True Az=112.995 Ze=-150.165 Az status=0008 Ze status=0009 09:45:27 Check angles 09:45:27 SkyScan query 09:45:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0008 0009 09:45:28 Msec=5250 True Az=112.995 Ze=-170.985 Az status=0008 Ze status=0009 09:45:28 Check angles 09:45:28 SkyScan query 09:45:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:45:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:45:29 Message to Master queued w/err=0: serial=47260 error=0 09:45:34 Received message from Master: op=Filter serial=47261 09:45:34 Color wheel filter change from 0 to 0 09:45:34 FLIGetFilterPos err=0 currentPosition=0 09:45:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:34 Filter is already there-color wheel unchanged 09:45:34 Received message from Master: op=Shutter serial=47262 09:45:34 Shutter LASER open 09:45:34 Received message from Camera: op=State serial=47264 09:45:34 GetSingleValue result=40 Value=cccccccc 09:45:34 SkyScan query 09:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:45:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:35 Parameters OK 09:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:35 Set A/D data flow result=40 09:45:35 Set A/D channel type result=40 09:45:35 Set A/D encoding result=40 09:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:35 Set channel filter=0.000000e+000 result=40 09:45:35 Config A/D Result=40 09:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:35 Get A/D filter: -9.255963e+061 result=40 09:45:35 Get A/D value=-858993460 result=40 09:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:35 Parameters OK 09:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:35 Set A/D data flow result=40 09:45:35 Set A/D channel type result=40 09:45:35 Set A/D encoding result=40 09:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:35 Set channel filter=0.000000e+000 result=40 09:45:35 Config A/D Result=40 09:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:35 Get A/D filter: -9.255963e+061 result=40 09:45:35 Get A/D value=-858993460 result=40 09:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:35 Aux= 09:45:35 Message to Camera, serial 47264 queued 09:45:43 Received message from Master: op=Shutter serial=47274 09:45:43 Shutter LASER close 09:45:44 Received message from Master: op=PointingHead serial=47278 09:45:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:45:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:45:44 Point started: ret=0 09:45:44 point_skyscan result=0 09:45:45 Check angles 09:45:45 SkyScan query 09:45:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.535<-21569 Statuses=0008 0009 09:45:45 Msec=0 True Az=112.995 Ze=-143.535 Az status=0008 Ze status=0009 09:45:45 Check angles 09:45:45 SkyScan query 09:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 09:45:46 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 09:45:46 Check angles 09:45:46 SkyScan query 09:45:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.74<-18716 Statuses=0008 0009 09:45:47 Msec=1500 True Az=112.995 Ze=-100.74 Az status=0008 Ze status=0009 09:45:47 Check angles 09:45:47 SkyScan query 09:45:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.8<-17320 Statuses=0008 0009 09:45:47 Msec=2250 True Az=112.995 Ze=-79.8 Az status=0008 Ze status=0009 09:45:48 Check angles 09:45:48 SkyScan query 09:45:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.86<-15924 Statuses=0008 0009 09:45:48 Msec=3000 True Az=112.995 Ze=-58.86 Az status=0008 Ze status=0009 09:45:48 Check angles 09:45:48 SkyScan query 09:45:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.89<-14526 Statuses=0008 0009 09:45:49 Msec=3750 True Az=112.995 Ze=-37.89 Az status=0008 Ze status=0009 09:45:49 Check angles 09:45:49 SkyScan query 09:45:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.47<-13098 Statuses=0008 0009 09:45:50 Msec=4500 True Az=112.995 Ze=-16.47 Az status=0008 Ze status=0009 09:45:50 Check angles 09:45:50 SkyScan query 09:45:51 SkyScan query done: ret=0 az=112.995<-7533 ze=4.395<-11707 Statuses=0008 0009 09:45:51 Msec=5250 True Az=112.995 Ze=4.395 Az status=0008 Ze status=0009 09:45:51 Check angles 09:45:51 SkyScan query 09:45:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:45:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:45:51 Message to Master queued w/err=0: serial=47278 error=0 09:45:56 Received message from Master: op=Filter serial=47279 09:45:56 Color wheel filter change from 0 to 0 09:45:56 FLIGetFilterPos err=0 currentPosition=0 09:45:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:56 Filter is already there-color wheel unchanged 09:45:56 Received message from Master: op=Shutter serial=47280 09:45:56 Shutter LASER close 09:45:57 Received message from Camera: op=State serial=47282 09:45:57 GetSingleValue result=40 Value=cccccccc 09:45:57 SkyScan query 09:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:45:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:57 Parameters OK 09:45:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:57 Set A/D data flow result=40 09:45:57 Set A/D channel type result=40 09:45:57 Set A/D encoding result=40 09:45:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:57 Set channel filter=0.000000e+000 result=40 09:45:57 Config A/D Result=40 09:45:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:57 Get A/D filter: -9.255963e+061 result=40 09:45:57 Get A/D value=-858993460 result=40 09:45:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:57 Parameters OK 09:45:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:57 Set A/D data flow result=40 09:45:57 Set A/D channel type result=40 09:45:57 Set A/D encoding result=40 09:45:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:57 Set channel filter=0.000000e+000 result=40 09:45:57 Config A/D Result=40 09:45:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:57 Get A/D filter: -9.255963e+061 result=40 09:45:57 Get A/D value=-858993460 result=40 09:45:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:57 Aux= 09:45:57 Message to Camera, serial 47282 queued 09:46:33 Received message from Master: op=PointingHead serial=47294 09:46:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:46:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:46:33 Point started: ret=0 09:46:33 point_skyscan result=0 09:46:34 Check angles 09:46:34 SkyScan query 09:46:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:46:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:46:35 Message to Master queued w/err=0: serial=47294 error=0 09:46:40 Received message from Master: op=Filter serial=47295 09:46:40 Color wheel filter change from 0 to 0 09:46:40 FLIGetFilterPos err=0 currentPosition=0 09:46:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:40 Filter is already there-color wheel unchanged 09:46:40 Received message from Master: op=Shutter serial=47296 09:46:40 Shutter LASER close 09:46:40 Received message from Camera: op=State serial=47298 09:46:40 GetSingleValue result=40 Value=cccccccc 09:46:40 SkyScan query 09:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:46:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:41 Parameters OK 09:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:41 Set A/D data flow result=40 09:46:41 Set A/D channel type result=40 09:46:41 Set A/D encoding result=40 09:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:41 Set channel filter=0.000000e+000 result=40 09:46:41 Config A/D Result=40 09:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:41 Get A/D filter: -9.255963e+061 result=40 09:46:41 Get A/D value=-858993460 result=40 09:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:41 Parameters OK 09:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:41 Set A/D data flow result=40 09:46:41 Set A/D channel type result=40 09:46:41 Set A/D encoding result=40 09:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:41 Set channel filter=0.000000e+000 result=40 09:46:41 Config A/D Result=40 09:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:41 Get A/D filter: -9.255963e+061 result=40 09:46:41 Get A/D value=-858993460 result=40 09:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:41 Aux= 09:46:41 Message to Camera, serial 47298 queued 09:47:17 Received message from Master: op=PointingHead serial=47311 09:47:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:47:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:47:18 Point started: ret=0 09:47:18 point_skyscan result=0 09:47:18 Check angles 09:47:18 SkyScan query 09:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:47:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:47:19 Message to Master queued w/err=0: serial=47311 error=0 09:47:24 Received message from Master: op=Filter serial=47312 09:47:24 Color wheel filter change from 0 to 0 09:47:24 FLIGetFilterPos err=0 currentPosition=0 09:47:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:24 Filter is already there-color wheel unchanged 09:47:24 Received message from Master: op=Shutter serial=47313 09:47:24 Shutter LASER close 09:47:24 Received message from Camera: op=State serial=47315 09:47:24 GetSingleValue result=40 Value=cccccccc 09:47:24 SkyScan query 09:47:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:47:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:25 Parameters OK 09:47:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:25 Set A/D data flow result=40 09:47:25 Set A/D channel type result=40 09:47:25 Set A/D encoding result=40 09:47:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:25 Set channel filter=0.000000e+000 result=40 09:47:25 Config A/D Result=40 09:47:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:25 Get A/D filter: -9.255963e+061 result=40 09:47:25 Get A/D value=-858993460 result=40 09:47:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:25 Parameters OK 09:47:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:25 Set A/D data flow result=40 09:47:25 Set A/D channel type result=40 09:47:25 Set A/D encoding result=40 09:47:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:25 Set channel filter=0.000000e+000 result=40 09:47:25 Config A/D Result=40 09:47:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:25 Get A/D filter: -9.255963e+061 result=40 09:47:25 Get A/D value=-858993460 result=40 09:47:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:25 Aux= 09:47:25 Message to Camera, serial 47315 queued 09:48:02 Received message from Master: op=PointingHead serial=47328 09:48:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:48:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:48:02 Point started: ret=0 09:48:02 point_skyscan result=0 09:48:03 Check angles 09:48:03 SkyScan query 09:48:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:48:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:48:03 Message to Master queued w/err=0: serial=47328 error=0 09:48:08 Received message from Master: op=Filter serial=47329 09:48:08 Color wheel filter change from 0 to 0 09:48:08 FLIGetFilterPos err=0 currentPosition=0 09:48:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:08 Filter is already there-color wheel unchanged 09:48:09 Received message from Master: op=Shutter serial=47330 09:48:09 Shutter LASER close 09:48:09 Received message from Camera: op=State serial=47332 09:48:09 GetSingleValue result=40 Value=cccccccc 09:48:09 SkyScan query 09:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:48:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:09 Parameters OK 09:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:09 Set A/D data flow result=40 09:48:09 Set A/D channel type result=40 09:48:09 Set A/D encoding result=40 09:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:09 Set channel filter=0.000000e+000 result=40 09:48:09 Config A/D Result=40 09:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:09 Get A/D filter: -9.255963e+061 result=40 09:48:09 Get A/D value=-858993460 result=40 09:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:09 Parameters OK 09:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:09 Set A/D data flow result=40 09:48:09 Set A/D channel type result=40 09:48:09 Set A/D encoding result=40 09:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:09 Set channel filter=0.000000e+000 result=40 09:48:09 Config A/D Result=40 09:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:09 Get A/D filter: -9.255963e+061 result=40 09:48:09 Get A/D value=-858993460 result=40 09:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:09 Aux= 09:48:09 Message to Camera, serial 47332 queued 09:48:46 Received message from Master: op=PointingHead serial=47345 09:48:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:48:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:48:46 Point started: ret=0 09:48:46 point_skyscan result=0 09:48:47 Check angles 09:48:47 SkyScan query 09:48:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 09:48:48 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 09:48:48 Check angles 09:48:48 SkyScan query 09:48:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 09:48:48 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 09:48:49 Check angles 09:48:49 SkyScan query 09:48:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 09:48:49 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 09:48:49 Check angles 09:48:49 SkyScan query 09:48:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.565<-17771 Statuses=0008 0009 09:48:50 Msec=2250 True Az=112.995 Ze=-86.565 Az status=0008 Ze status=0009 09:48:50 Check angles 09:48:50 SkyScan query 09:48:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 09:48:51 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 09:48:51 Check angles 09:48:51 SkyScan query 09:48:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.88<-20592 Statuses=0008 0009 09:48:51 Msec=3750 True Az=112.995 Ze=-128.88 Az status=0008 Ze status=0009 09:48:52 Check angles 09:48:52 SkyScan query 09:48:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.85<-21990 Statuses=0008 0009 09:48:52 Msec=4500 True Az=112.995 Ze=-149.85 Az status=0008 Ze status=0009 09:48:52 Check angles 09:48:52 SkyScan query 09:48:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.09<-23406 Statuses=0008 0009 09:48:53 Msec=5250 True Az=112.995 Ze=-171.09 Az status=0008 Ze status=0009 09:48:53 Check angles 09:48:53 SkyScan query 09:48:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:48:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:48:54 Message to Master queued w/err=0: serial=47345 error=0 09:48:59 Received message from Master: op=Filter serial=47346 09:48:59 Color wheel filter change from 0 to 0 09:48:59 FLIGetFilterPos err=0 currentPosition=0 09:48:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:59 Filter is already there-color wheel unchanged 09:48:59 Received message from Master: op=Shutter serial=47347 09:48:59 Shutter LASER open 09:48:59 Received message from Camera: op=State serial=47349 09:48:59 GetSingleValue result=40 Value=cccccccc 09:48:59 SkyScan query 09:49:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:49:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:00 Parameters OK 09:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:00 Set A/D data flow result=40 09:49:00 Set A/D channel type result=40 09:49:00 Set A/D encoding result=40 09:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:00 Set channel filter=0.000000e+000 result=40 09:49:00 Config A/D Result=40 09:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:00 Get A/D filter: -9.255963e+061 result=40 09:49:00 Get A/D value=-858993460 result=40 09:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:00 Parameters OK 09:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:00 Set A/D data flow result=40 09:49:00 Set A/D channel type result=40 09:49:00 Set A/D encoding result=40 09:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:00 Set channel filter=0.000000e+000 result=40 09:49:00 Config A/D Result=40 09:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:00 Get A/D filter: -9.255963e+061 result=40 09:49:00 Get A/D value=-858993460 result=40 09:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:00 Aux= 09:49:00 Message to Camera, serial 47349 queued 09:49:08 Received message from Master: op=Shutter serial=47359 09:49:08 Shutter LASER close 09:49:09 Received message from Master: op=PointingHead serial=47363 09:49:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:49:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:49:09 Point started: ret=0 09:49:09 point_skyscan result=0 09:49:10 Check angles 09:49:10 SkyScan query 09:49:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 09:49:10 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 09:49:11 Check angles 09:49:11 SkyScan query 09:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 09:49:11 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 09:49:11 Check angles 09:49:11 SkyScan query 09:49:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.485<-18699 Statuses=0008 0009 09:49:12 Msec=1500 True Az=112.995 Ze=-100.485 Az status=0008 Ze status=0009 09:49:12 Check angles 09:49:12 SkyScan query 09:49:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.08<-17272 Statuses=0008 0009 09:49:13 Msec=2250 True Az=112.995 Ze=-79.08 Az status=0008 Ze status=0009 09:49:13 Check angles 09:49:13 SkyScan query 09:49:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.095<-15873 Statuses=0008 0009 09:49:13 Msec=3000 True Az=112.995 Ze=-58.095 Az status=0008 Ze status=0009 09:49:14 Check angles 09:49:14 SkyScan query 09:49:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.17<-14478 Statuses=0008 0009 09:49:14 Msec=3750 True Az=112.995 Ze=-37.17 Az status=0008 Ze status=0009 09:49:14 Check angles 09:49:14 SkyScan query 09:49:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.2<-13080 Statuses=0008 0009 09:49:15 Msec=4500 True Az=112.995 Ze=-16.2 Az status=0008 Ze status=0009 09:49:15 Check angles 09:49:15 SkyScan query 09:49:16 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 09:49:16 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 09:49:16 Check angles 09:49:16 SkyScan query 09:49:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:49:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:49:16 Message to Master queued w/err=0: serial=47363 error=0 09:49:21 Received message from Master: op=Filter serial=47364 09:49:21 Color wheel filter change from 0 to 0 09:49:21 FLIGetFilterPos err=0 currentPosition=0 09:49:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:21 Filter is already there-color wheel unchanged 09:49:22 Received message from Master: op=Shutter serial=47365 09:49:22 Shutter LASER close 09:49:22 Received message from Camera: op=State serial=47367 09:49:22 GetSingleValue result=40 Value=cccccccc 09:49:22 SkyScan query 09:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:49:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:22 Parameters OK 09:49:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:22 Set A/D data flow result=40 09:49:22 Set A/D channel type result=40 09:49:22 Set A/D encoding result=40 09:49:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:22 Set channel filter=0.000000e+000 result=40 09:49:22 Config A/D Result=40 09:49:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:22 Get A/D filter: -9.255963e+061 result=40 09:49:22 Get A/D value=-858993460 result=40 09:49:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:22 Parameters OK 09:49:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:22 Set A/D data flow result=40 09:49:22 Set A/D channel type result=40 09:49:22 Set A/D encoding result=40 09:49:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:22 Set channel filter=0.000000e+000 result=40 09:49:22 Config A/D Result=40 09:49:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:22 Get A/D filter: -9.255963e+061 result=40 09:49:22 Get A/D value=-858993460 result=40 09:49:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:22 Aux= 09:49:22 Message to Camera, serial 47367 queued 09:49:59 Received message from Master: op=PointingHead serial=47380 09:49:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:49:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:50:00 Point started: ret=0 09:50:00 point_skyscan result=0 09:50:00 Check angles 09:50:00 SkyScan query 09:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:50:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:50:01 Message to Master queued w/err=0: serial=47380 error=0 09:50:06 Received message from Master: op=Filter serial=47381 09:50:06 Color wheel filter change from 0 to 0 09:50:06 FLIGetFilterPos err=0 currentPosition=0 09:50:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:06 Filter is already there-color wheel unchanged 09:50:06 Received message from Master: op=Shutter serial=47382 09:50:06 Shutter LASER close 09:50:06 Received message from Camera: op=State serial=47384 09:50:06 GetSingleValue result=40 Value=cccccccc 09:50:06 SkyScan query 09:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:50:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:07 Parameters OK 09:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:07 Set A/D data flow result=40 09:50:07 Set A/D channel type result=40 09:50:07 Set A/D encoding result=40 09:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:07 Set channel filter=0.000000e+000 result=40 09:50:07 Config A/D Result=40 09:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:07 Get A/D filter: -9.255963e+061 result=40 09:50:07 Get A/D value=-858993460 result=40 09:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:07 Parameters OK 09:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:07 Set A/D data flow result=40 09:50:07 Set A/D channel type result=40 09:50:07 Set A/D encoding result=40 09:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:07 Set channel filter=0.000000e+000 result=40 09:50:07 Config A/D Result=40 09:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:07 Get A/D filter: -9.255963e+061 result=40 09:50:07 Get A/D value=-858993460 result=40 09:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:07 Aux= 09:50:07 Message to Camera, serial 47384 queued 09:50:44 Received message from Master: op=PointingHead serial=47397 09:50:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:50:44 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:50:44 Point started: ret=0 09:50:44 point_skyscan result=0 09:50:45 Check angles 09:50:45 SkyScan query 09:50:45 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 09:50:45 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 09:50:45 Check angles 09:50:45 SkyScan query 09:50:46 SkyScan query done: ret=0 az=153.645<-10243 ze=-6.495<-12433 Statuses=0009 0008 09:50:46 Msec=750 True Az=153.645 Ze=-6.495 Az status=0009 Ze status=0008 09:50:46 Check angles 09:50:46 SkyScan query 09:50:47 SkyScan query done: ret=0 az=171.09<-11406 ze=-6.495<-12433 Statuses=0009 0008 09:50:47 Msec=1500 True Az=171.09 Ze=-6.495 Az status=0009 Ze status=0008 09:50:47 Check angles 09:50:47 SkyScan query 09:50:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:50:47 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:50:47 Message to Master queued w/err=0: serial=47397 error=0 09:50:52 Received message from Master: op=Filter serial=47398 09:50:52 Color wheel filter change from 0 to 0 09:50:52 FLIGetFilterPos err=0 currentPosition=0 09:50:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:52 Filter is already there-color wheel unchanged 09:50:53 Received message from Master: op=Shutter serial=47399 09:50:53 Shutter LASER close 09:50:53 Received message from Camera: op=State serial=47401 09:50:53 GetSingleValue result=40 Value=cccccccc 09:50:53 SkyScan query 09:50:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:50:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:53 Parameters OK 09:50:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:53 Set A/D data flow result=40 09:50:53 Set A/D channel type result=40 09:50:53 Set A/D encoding result=40 09:50:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:53 Set channel filter=0.000000e+000 result=40 09:50:53 Config A/D Result=40 09:50:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:53 Get A/D filter: -9.255963e+061 result=40 09:50:53 Get A/D value=-858993460 result=40 09:50:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:53 Parameters OK 09:50:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:53 Set A/D data flow result=40 09:50:53 Set A/D channel type result=40 09:50:53 Set A/D encoding result=40 09:50:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:53 Set channel filter=0.000000e+000 result=40 09:50:53 Config A/D Result=40 09:50:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:53 Get A/D filter: -9.255963e+061 result=40 09:50:53 Get A/D value=-858993460 result=40 09:50:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:53 Aux= 09:50:53 Message to Camera, serial 47401 queued 09:51:30 Received message from Master: op=PointingHead serial=47414 09:51:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:51:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:51:30 Point started: ret=0 09:51:30 point_skyscan result=0 09:51:31 Check angles 09:51:31 SkyScan query 09:51:32 SkyScan query done: ret=0 az=152.535<-10169 ze=6.51<-11566 Statuses=0009 0008 09:51:32 Msec=0 True Az=152.535 Ze=6.51 Az status=0009 Ze status=0008 09:51:32 Check angles 09:51:32 SkyScan query 09:51:32 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 09:51:32 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 09:51:33 Check angles 09:51:33 SkyScan query 09:51:33 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 09:51:33 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 09:51:33 Check angles 09:51:33 SkyScan query 09:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:51:34 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:51:34 Message to Master queued w/err=0: serial=47414 error=0 09:51:39 Received message from Master: op=Filter serial=47415 09:51:39 Color wheel filter change from 0 to 0 09:51:39 FLIGetFilterPos err=0 currentPosition=0 09:51:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:39 Filter is already there-color wheel unchanged 09:51:39 Received message from Master: op=Shutter serial=47416 09:51:39 Shutter LASER close 09:51:39 Received message from Camera: op=State serial=47418 09:51:39 GetSingleValue result=40 Value=cccccccc 09:51:39 SkyScan query 09:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:51:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:40 Parameters OK 09:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:40 Set A/D data flow result=40 09:51:40 Set A/D channel type result=40 09:51:40 Set A/D encoding result=40 09:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:40 Set channel filter=0.000000e+000 result=40 09:51:40 Config A/D Result=40 09:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:40 Get A/D filter: -9.255963e+061 result=40 09:51:40 Get A/D value=-858993460 result=40 09:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:40 Parameters OK 09:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:40 Set A/D data flow result=40 09:51:40 Set A/D channel type result=40 09:51:40 Set A/D encoding result=40 09:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:40 Set channel filter=0.000000e+000 result=40 09:51:40 Config A/D Result=40 09:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:40 Get A/D filter: -9.255963e+061 result=40 09:51:40 Get A/D value=-858993460 result=40 09:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:40 Aux= 09:51:40 Message to Camera, serial 47418 queued 09:52:17 Received message from Master: op=PointingHead serial=47431 09:52:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:52:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:52:17 Point started: ret=0 09:52:17 point_skyscan result=0 09:52:18 Check angles 09:52:18 SkyScan query 09:52:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 09:52:18 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 09:52:18 Check angles 09:52:18 SkyScan query 09:52:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 09:52:19 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 09:52:19 Check angles 09:52:19 SkyScan query 09:52:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 09:52:20 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 09:52:20 Check angles 09:52:20 SkyScan query 09:52:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 09:52:21 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 09:52:21 Check angles 09:52:21 SkyScan query 09:52:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.265<-19151 Statuses=0008 0009 09:52:21 Msec=3000 True Az=112.995 Ze=-107.265 Az status=0008 Ze status=0009 09:52:21 Check angles 09:52:21 SkyScan query 09:52:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.22<-20548 Statuses=0008 0009 09:52:22 Msec=3750 True Az=112.995 Ze=-128.22 Az status=0008 Ze status=0009 09:52:22 Check angles 09:52:22 SkyScan query 09:52:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.19<-21946 Statuses=0008 0009 09:52:23 Msec=4500 True Az=112.995 Ze=-149.19 Az status=0008 Ze status=0009 09:52:23 Check angles 09:52:23 SkyScan query 09:52:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.13<-23342 Statuses=0008 0009 09:52:24 Msec=5250 True Az=112.995 Ze=-170.13 Az status=0008 Ze status=0009 09:52:24 Check angles 09:52:24 SkyScan query 09:52:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:52:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:52:24 Message to Master queued w/err=0: serial=47431 error=0 09:52:29 Received message from Master: op=Filter serial=47432 09:52:29 Color wheel filter change from 0 to 0 09:52:29 FLIGetFilterPos err=0 currentPosition=0 09:52:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:29 Filter is already there-color wheel unchanged 09:52:29 Received message from Master: op=Shutter serial=47433 09:52:29 Shutter LASER open 09:52:30 Received message from Camera: op=State serial=47435 09:52:30 GetSingleValue result=40 Value=cccccccc 09:52:30 SkyScan query 09:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:52:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:30 Parameters OK 09:52:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:30 Set A/D data flow result=40 09:52:30 Set A/D channel type result=40 09:52:30 Set A/D encoding result=40 09:52:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:30 Set channel filter=0.000000e+000 result=40 09:52:30 Config A/D Result=40 09:52:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:30 Get A/D filter: -9.255963e+061 result=40 09:52:30 Get A/D value=-858993460 result=40 09:52:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:30 Parameters OK 09:52:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:30 Set A/D data flow result=40 09:52:30 Set A/D channel type result=40 09:52:30 Set A/D encoding result=40 09:52:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:30 Set channel filter=0.000000e+000 result=40 09:52:30 Config A/D Result=40 09:52:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:30 Get A/D filter: -9.255963e+061 result=40 09:52:30 Get A/D value=-858993460 result=40 09:52:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:30 Aux= 09:52:30 Message to Camera, serial 47435 queued 09:52:39 Received message from Master: op=Shutter serial=47445 09:52:39 Shutter LASER close 09:52:39 Received message from Master: op=PointingHead serial=47449 09:52:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:52:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:52:39 Point started: ret=0 09:52:39 point_skyscan result=0 09:52:40 Check angles 09:52:40 SkyScan query 09:52:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 09:52:41 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 09:52:41 Check angles 09:52:41 SkyScan query 09:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.71<-20114 Statuses=0008 0009 09:52:42 Msec=750 True Az=112.995 Ze=-121.71 Az status=0008 Ze status=0009 09:52:42 Check angles 09:52:42 SkyScan query 09:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 09:52:42 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 09:52:42 Check angles 09:52:42 SkyScan query 09:52:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.83<-17322 Statuses=0008 0009 09:52:43 Msec=2250 True Az=112.995 Ze=-79.83 Az status=0008 Ze status=0009 09:52:43 Check angles 09:52:43 SkyScan query 09:52:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.875<-15925 Statuses=0008 0009 09:52:44 Msec=3000 True Az=112.995 Ze=-58.875 Az status=0008 Ze status=0009 09:52:44 Check angles 09:52:44 SkyScan query 09:52:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 09:52:45 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 09:52:45 Check angles 09:52:45 SkyScan query 09:52:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.95<-13130 Statuses=0008 0009 09:52:45 Msec=4500 True Az=112.995 Ze=-16.95 Az status=0008 Ze status=0009 09:52:45 Check angles 09:52:45 SkyScan query 09:52:46 SkyScan query done: ret=0 az=112.995<-7533 ze=4.005<-11733 Statuses=0008 0009 09:52:46 Msec=5250 True Az=112.995 Ze=4.005 Az status=0008 Ze status=0009 09:52:46 Check angles 09:52:46 SkyScan query 09:52:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:52:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:52:47 Message to Master queued w/err=0: serial=47449 error=0 09:52:52 Received message from Master: op=Filter serial=47450 09:52:52 Color wheel filter change from 0 to 0 09:52:52 FLIGetFilterPos err=0 currentPosition=0 09:52:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:52 Filter is already there-color wheel unchanged 09:52:52 Received message from Master: op=Shutter serial=47451 09:52:52 Shutter LASER close 09:52:52 Received message from Camera: op=State serial=47453 09:52:52 GetSingleValue result=40 Value=cccccccc 09:52:52 SkyScan query 09:52:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:52:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:53 Parameters OK 09:52:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:53 Set A/D data flow result=40 09:52:53 Set A/D channel type result=40 09:52:53 Set A/D encoding result=40 09:52:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:53 Set channel filter=0.000000e+000 result=40 09:52:53 Config A/D Result=40 09:52:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:53 Get A/D filter: -9.255963e+061 result=40 09:52:53 Get A/D value=-858993460 result=40 09:52:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:53 Parameters OK 09:52:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:53 Set A/D data flow result=40 09:52:53 Set A/D channel type result=40 09:52:53 Set A/D encoding result=40 09:52:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:53 Set channel filter=0.000000e+000 result=40 09:52:53 Config A/D Result=40 09:52:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:53 Get A/D filter: -9.255963e+061 result=40 09:52:53 Get A/D value=-858993460 result=40 09:52:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:53 Aux= 09:52:53 Message to Camera, serial 47453 queued 09:53:30 Received message from Master: op=PointingHead serial=47466 09:53:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:53:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:53:30 Point started: ret=0 09:53:30 point_skyscan result=0 09:53:31 Check angles 09:53:31 SkyScan query 09:53:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:53:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:53:31 Message to Master queued w/err=0: serial=47466 error=0 09:53:36 Received message from Master: op=Filter serial=47467 09:53:36 Color wheel filter change from 0 to 0 09:53:36 FLIGetFilterPos err=0 currentPosition=0 09:53:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:36 Filter is already there-color wheel unchanged 09:53:36 Received message from Master: op=Shutter serial=47468 09:53:36 Shutter LASER close 09:53:36 Received message from Camera: op=State serial=47470 09:53:36 GetSingleValue result=40 Value=cccccccc 09:53:36 SkyScan query 09:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:53:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:37 Parameters OK 09:53:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:37 Set A/D data flow result=40 09:53:37 Set A/D channel type result=40 09:53:37 Set A/D encoding result=40 09:53:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:37 Set channel filter=0.000000e+000 result=40 09:53:37 Config A/D Result=40 09:53:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:37 Get A/D filter: -9.255963e+061 result=40 09:53:37 Get A/D value=-858993460 result=40 09:53:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:37 Parameters OK 09:53:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:37 Set A/D data flow result=40 09:53:37 Set A/D channel type result=40 09:53:37 Set A/D encoding result=40 09:53:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:37 Set channel filter=0.000000e+000 result=40 09:53:37 Config A/D Result=40 09:53:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2019-3-1 09:53:37] 09:53:37 Get A/D filter: -9.255963e+061 result=40 09:53:37 Get A/D value=-858993460 result=40 09:53:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:37 Aux= 09:53:37 Message to Camera, serial 47470 queued 09:54:14 Received message from Master: op=PointingHead serial=47483 09:54:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:54:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:54:14 Point started: ret=0 09:54:14 point_skyscan result=0 09:54:15 Check angles 09:54:15 SkyScan query 09:54:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:54:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:54:16 Message to Master queued w/err=0: serial=47483 error=0 09:54:21 Received message from Master: op=Filter serial=47484 09:54:21 Color wheel filter change from 0 to 0 09:54:21 FLIGetFilterPos err=0 currentPosition=0 09:54:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:21 Filter is already there-color wheel unchanged 09:54:21 Received message from Master: op=Shutter serial=47485 09:54:21 Shutter LASER close 09:54:21 Received message from Camera: op=State serial=47487 09:54:21 GetSingleValue result=40 Value=cccccccc 09:54:21 SkyScan query 09:54:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:54:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:21 Parameters OK 09:54:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:21 Set A/D data flow result=40 09:54:21 Set A/D channel type result=40 09:54:21 Set A/D encoding result=40 09:54:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:21 Set channel filter=0.000000e+000 result=40 09:54:21 Config A/D Result=40 09:54:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:21 Get A/D filter: -9.255963e+061 result=40 09:54:21 Get A/D value=-858993460 result=40 09:54:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:21 Parameters OK 09:54:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:21 Set A/D data flow result=40 09:54:21 Set A/D channel type result=40 09:54:21 Set A/D encoding result=40 09:54:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:21 Set channel filter=0.000000e+000 result=40 09:54:21 Config A/D Result=40 09:54:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:21 Get A/D filter: -9.255963e+061 result=40 09:54:21 Get A/D value=-858993460 result=40 09:54:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:21 Aux= 09:54:21 Message to Camera, serial 47487 queued 09:54:58 Received message from Master: op=PointingHead serial=47500 09:54:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:54:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:54:59 Point started: ret=0 09:54:59 point_skyscan result=0 09:54:59 Check angles 09:54:59 SkyScan query 09:55:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:55:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:55:00 Message to Master queued w/err=0: serial=47500 error=0 09:55:05 Received message from Master: op=Filter serial=47501 09:55:05 Color wheel filter change from 0 to 0 09:55:05 FLIGetFilterPos err=0 currentPosition=0 09:55:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:05 Filter is already there-color wheel unchanged 09:55:05 Received message from Master: op=Shutter serial=47502 09:55:05 Shutter LASER close 09:55:05 Received message from Camera: op=State serial=47504 09:55:05 GetSingleValue result=40 Value=cccccccc 09:55:05 SkyScan query 09:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:55:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:06 Parameters OK 09:55:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:06 Set A/D data flow result=40 09:55:06 Set A/D channel type result=40 09:55:06 Set A/D encoding result=40 09:55:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:06 Set channel filter=0.000000e+000 result=40 09:55:06 Config A/D Result=40 09:55:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:06 Get A/D filter: -9.255963e+061 result=40 09:55:06 Get A/D value=-858993460 result=40 09:55:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:06 Parameters OK 09:55:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:06 Set A/D data flow result=40 09:55:06 Set A/D channel type result=40 09:55:06 Set A/D encoding result=40 09:55:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:06 Set channel filter=0.000000e+000 result=40 09:55:06 Config A/D Result=40 09:55:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:06 Get A/D filter: -9.255963e+061 result=40 09:55:06 Get A/D value=-858993460 result=40 09:55:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:06 Aux= 09:55:06 Message to Camera, serial 47504 queued 09:55:43 Received message from Master: op=PointingHead serial=47517 09:55:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:55:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:55:43 Point started: ret=0 09:55:43 point_skyscan result=0 09:55:44 Check angles 09:55:44 SkyScan query 09:55:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 09:55:44 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 09:55:44 Check angles 09:55:44 SkyScan query 09:55:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 09:55:45 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 09:55:45 Check angles 09:55:45 SkyScan query 09:55:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 09:55:46 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 09:55:46 Check angles 09:55:46 SkyScan query 09:55:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 09:55:46 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 09:55:47 Check angles 09:55:47 SkyScan query 09:55:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.445<-19163 Statuses=0008 0009 09:55:47 Msec=3000 True Az=112.995 Ze=-107.445 Az status=0008 Ze status=0009 09:55:47 Check angles 09:55:47 SkyScan query 09:55:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 09:55:48 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 09:55:48 Check angles 09:55:48 SkyScan query 09:55:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.775<-21985 Statuses=0008 0009 09:55:49 Msec=4500 True Az=112.995 Ze=-149.775 Az status=0008 Ze status=0009 09:55:49 Check angles 09:55:49 SkyScan query 09:55:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.685<-23379 Statuses=0008 0009 09:55:49 Msec=5250 True Az=112.995 Ze=-170.685 Az status=0008 Ze status=0009 09:55:50 Check angles 09:55:50 SkyScan query 09:55:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:55:50 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:55:50 Message to Master queued w/err=0: serial=47517 error=0 09:55:55 Received message from Master: op=Filter serial=47518 09:55:55 Color wheel filter change from 0 to 0 09:55:55 FLIGetFilterPos err=0 currentPosition=0 09:55:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:55 Filter is already there-color wheel unchanged 09:55:55 Received message from Master: op=Shutter serial=47519 09:55:55 Shutter LASER open 09:55:56 Received message from Camera: op=State serial=47521 09:55:56 GetSingleValue result=40 Value=cccccccc 09:55:56 SkyScan query 09:55:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:55:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:56 Parameters OK 09:55:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:56 Set A/D data flow result=40 09:55:56 Set A/D channel type result=40 09:55:56 Set A/D encoding result=40 09:55:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:56 Set channel filter=0.000000e+000 result=40 09:55:56 Config A/D Result=40 09:55:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:56 Get A/D filter: -9.255963e+061 result=40 09:55:56 Get A/D value=-858993460 result=40 09:55:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:56 Parameters OK 09:55:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:56 Set A/D data flow result=40 09:55:56 Set A/D channel type result=40 09:55:56 Set A/D encoding result=40 09:55:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:56 Set channel filter=0.000000e+000 result=40 09:55:56 Config A/D Result=40 09:55:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:56 Get A/D filter: -9.255963e+061 result=40 09:55:56 Get A/D value=-858993460 result=40 09:55:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:56 Aux= 09:55:56 Message to Camera, serial 47521 queued 09:56:05 Received message from Master: op=Shutter serial=47531 09:56:05 Shutter LASER close 09:56:05 Received message from Master: op=PointingHead serial=47535 09:56:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:56:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:56:06 Point started: ret=0 09:56:06 point_skyscan result=0 09:56:06 Check angles 09:56:06 SkyScan query 09:56:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.535<-21569 Statuses=0008 0009 09:56:07 Msec=0 True Az=112.995 Ze=-143.535 Az status=0008 Ze status=0009 09:56:07 Check angles 09:56:07 SkyScan query 09:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.61<-20174 Statuses=0008 0009 09:56:08 Msec=750 True Az=112.995 Ze=-122.61 Az status=0008 Ze status=0009 09:56:08 Check angles 09:56:08 SkyScan query 09:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 09:56:08 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 09:56:09 Check angles 09:56:09 SkyScan query 09:56:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.815<-17321 Statuses=0008 0009 09:56:09 Msec=2250 True Az=112.995 Ze=-79.815 Az status=0008 Ze status=0009 09:56:09 Check angles 09:56:09 SkyScan query 09:56:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.86<-15924 Statuses=0008 0009 09:56:10 Msec=3000 True Az=112.995 Ze=-58.86 Az status=0008 Ze status=0009 09:56:10 Check angles 09:56:10 SkyScan query 09:56:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.89<-14526 Statuses=0008 0009 09:56:11 Msec=3750 True Az=112.995 Ze=-37.89 Az status=0008 Ze status=0009 09:56:11 Check angles 09:56:11 SkyScan query 09:56:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 09:56:11 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 09:56:12 Check angles 09:56:12 SkyScan query 09:56:12 SkyScan query done: ret=0 az=112.995<-7533 ze=4.005<-11733 Statuses=0008 0009 09:56:12 Msec=5250 True Az=112.995 Ze=4.005 Az status=0008 Ze status=0009 09:56:12 Check angles 09:56:12 SkyScan query 09:56:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:56:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:56:13 Message to Master queued w/err=0: serial=47535 error=0 09:56:18 Received message from Master: op=Filter serial=47536 09:56:18 Color wheel filter change from 0 to 0 09:56:18 FLIGetFilterPos err=0 currentPosition=0 09:56:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:18 Filter is already there-color wheel unchanged 09:56:18 Received message from Master: op=Shutter serial=47537 09:56:18 Shutter LASER close 09:56:18 Received message from Camera: op=State serial=47539 09:56:18 GetSingleValue result=40 Value=cccccccc 09:56:18 SkyScan query 09:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:56:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:19 Parameters OK 09:56:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:19 Set A/D data flow result=40 09:56:19 Set A/D channel type result=40 09:56:19 Set A/D encoding result=40 09:56:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:19 Set channel filter=0.000000e+000 result=40 09:56:19 Config A/D Result=40 09:56:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:19 Get A/D filter: -9.255963e+061 result=40 09:56:19 Get A/D value=-858993460 result=40 09:56:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:19 Parameters OK 09:56:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:19 Set A/D data flow result=40 09:56:19 Set A/D channel type result=40 09:56:19 Set A/D encoding result=40 09:56:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:19 Set channel filter=0.000000e+000 result=40 09:56:19 Config A/D Result=40 09:56:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:19 Get A/D filter: -9.255963e+061 result=40 09:56:19 Get A/D value=-858993460 result=40 09:56:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:19 Aux= 09:56:19 Message to Camera, serial 47539 queued 09:56:56 Received message from Master: op=PointingHead serial=47552 09:56:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:56:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:56:56 Point started: ret=0 09:56:56 point_skyscan result=0 09:56:57 Check angles 09:56:57 SkyScan query 09:56:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:56:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:56:57 Message to Master queued w/err=0: serial=47552 error=0 09:57:02 Received message from Master: op=Filter serial=47553 09:57:02 Color wheel filter change from 0 to 0 09:57:02 FLIGetFilterPos err=0 currentPosition=0 09:57:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:02 Filter is already there-color wheel unchanged 09:57:03 Received message from Master: op=Shutter serial=47554 09:57:03 Shutter LASER close 09:57:03 Received message from Camera: op=State serial=47556 09:57:03 GetSingleValue result=40 Value=cccccccc 09:57:03 SkyScan query 09:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:57:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:03 Parameters OK 09:57:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:03 Set A/D data flow result=40 09:57:03 Set A/D channel type result=40 09:57:03 Set A/D encoding result=40 09:57:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:03 Set channel filter=0.000000e+000 result=40 09:57:03 Config A/D Result=40 09:57:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:03 Get A/D filter: -9.255963e+061 result=40 09:57:03 Get A/D value=-858993460 result=40 09:57:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:03 Parameters OK 09:57:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:03 Set A/D data flow result=40 09:57:03 Set A/D channel type result=40 09:57:03 Set A/D encoding result=40 09:57:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:03 Set channel filter=0.000000e+000 result=40 09:57:03 Config A/D Result=40 09:57:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:03 Get A/D filter: -9.255963e+061 result=40 09:57:03 Get A/D value=-858993460 result=40 09:57:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:03 Aux= 09:57:03 Message to Camera, serial 47556 queued 09:57:40 Received message from Master: op=PointingHead serial=47569 09:57:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:57:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:57:40 Point started: ret=0 09:57:40 point_skyscan result=0 09:57:41 Check angles 09:57:41 SkyScan query 09:57:42 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 09:57:42 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 09:57:42 Check angles 09:57:42 SkyScan query 09:57:42 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 09:57:42 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 09:57:43 Check angles 09:57:43 SkyScan query 09:57:43 SkyScan query done: ret=0 az=171.435<-11429 ze=-6.495<-12433 Statuses=0009 0008 09:57:43 Msec=1500 True Az=171.435 Ze=-6.495 Az status=0009 Ze status=0008 09:57:43 Check angles 09:57:43 SkyScan query 09:57:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:57:44 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:57:44 Message to Master queued w/err=0: serial=47569 error=0 09:57:49 Received message from Master: op=Filter serial=47570 09:57:49 Color wheel filter change from 0 to 0 09:57:49 FLIGetFilterPos err=0 currentPosition=0 09:57:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:49 Filter is already there-color wheel unchanged 09:57:49 Received message from Master: op=Shutter serial=47571 09:57:49 Shutter LASER close 09:57:49 Received message from Camera: op=State serial=47573 09:57:49 GetSingleValue result=40 Value=cccccccc 09:57:49 SkyScan query 09:57:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:57:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:50 Parameters OK 09:57:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:50 Set A/D data flow result=40 09:57:50 Set A/D channel type result=40 09:57:50 Set A/D encoding result=40 09:57:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:50 Set channel filter=0.000000e+000 result=40 09:57:50 Config A/D Result=40 09:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:50 Get A/D filter: -9.255963e+061 result=40 09:57:50 Get A/D value=-858993460 result=40 09:57:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:50 Parameters OK 09:57:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:50 Set A/D data flow result=40 09:57:50 Set A/D channel type result=40 09:57:50 Set A/D encoding result=40 09:57:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:50 Set channel filter=0.000000e+000 result=40 09:57:50 Config A/D Result=40 09:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:50 Get A/D filter: -9.255963e+061 result=40 09:57:50 Get A/D value=-858993460 result=40 09:57:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:50 Aux= 09:57:50 Message to Camera, serial 47573 queued 09:58:27 Received message from Master: op=PointingHead serial=47586 09:58:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:58:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:58:27 Point started: ret=0 09:58:27 point_skyscan result=0 09:58:28 Check angles 09:58:28 SkyScan query 09:58:28 SkyScan query done: ret=0 az=152.82<-10188 ze=6.51<-11566 Statuses=0009 0008 09:58:28 Msec=0 True Az=152.82 Ze=6.51 Az status=0009 Ze status=0008 09:58:28 Check angles 09:58:28 SkyScan query 09:58:29 SkyScan query done: ret=0 az=135.045<-9003 ze=6.495<-11567 Statuses=0009 0008 09:58:29 Msec=750 True Az=135.045 Ze=6.495 Az status=0009 Ze status=0008 09:58:29 Check angles 09:58:29 SkyScan query 09:58:30 SkyScan query done: ret=0 az=117.57<-7838 ze=6.495<-11567 Statuses=0009 0008 09:58:30 Msec=1500 True Az=117.57 Ze=6.495 Az status=0009 Ze status=0008 09:58:30 Check angles 09:58:30 SkyScan query 09:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:58:30 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:58:30 Message to Master queued w/err=0: serial=47586 error=0 09:58:35 Received message from Master: op=Filter serial=47587 09:58:35 Color wheel filter change from 0 to 0 09:58:35 FLIGetFilterPos err=0 currentPosition=0 09:58:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:35 Filter is already there-color wheel unchanged 09:58:36 Received message from Master: op=Shutter serial=47588 09:58:36 Shutter LASER close 09:58:36 Received message from Camera: op=State serial=47590 09:58:36 GetSingleValue result=40 Value=cccccccc 09:58:36 SkyScan query 09:58:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:58:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:36 Parameters OK 09:58:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:36 Set A/D data flow result=40 09:58:36 Set A/D channel type result=40 09:58:36 Set A/D encoding result=40 09:58:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:36 Set channel filter=0.000000e+000 result=40 09:58:36 Config A/D Result=40 09:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:36 Get A/D filter: -9.255963e+061 result=40 09:58:36 Get A/D value=-858993460 result=40 09:58:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:36 Parameters OK 09:58:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:36 Set A/D data flow result=40 09:58:36 Set A/D channel type result=40 09:58:36 Set A/D encoding result=40 09:58:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:36 Set channel filter=0.000000e+000 result=40 09:58:36 Config A/D Result=40 09:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:36 Get A/D filter: -9.255963e+061 result=40 09:58:36 Get A/D value=-858993460 result=40 09:58:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:36 Aux= 09:58:36 Message to Camera, serial 47590 queued 09:59:12 Received message from Master: op=PointingHead serial=47602 09:59:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:59:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:59:13 Point started: ret=0 09:59:13 point_skyscan result=0 09:59:13 Check angles 09:59:13 SkyScan query 09:59:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 09:59:14 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 09:59:14 Check angles 09:59:14 SkyScan query 09:59:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.055<-14937 Statuses=0008 0009 09:59:15 Msec=750 True Az=112.995 Ze=-44.055 Az status=0008 Ze status=0009 09:59:15 Check angles 09:59:15 SkyScan query 09:59:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 09:59:15 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 09:59:16 Check angles 09:59:16 SkyScan query 09:59:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.415<-17761 Statuses=0008 0009 09:59:16 Msec=2250 True Az=112.995 Ze=-86.415 Az status=0008 Ze status=0009 09:59:16 Check angles 09:59:16 SkyScan query 09:59:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.355<-19157 Statuses=0008 0009 09:59:17 Msec=3000 True Az=112.995 Ze=-107.355 Az status=0008 Ze status=0009 09:59:17 Check angles 09:59:17 SkyScan query 09:59:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.295<-20553 Statuses=0008 0009 09:59:18 Msec=3750 True Az=112.995 Ze=-128.295 Az status=0008 Ze status=0009 09:59:18 Check angles 09:59:18 SkyScan query 09:59:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.25<-21950 Statuses=0008 0009 09:59:18 Msec=4500 True Az=112.995 Ze=-149.25 Az status=0008 Ze status=0009 09:59:19 Check angles 09:59:19 SkyScan query 09:59:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 09:59:19 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 09:59:19 Check angles 09:59:19 SkyScan query 09:59:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:59:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:59:20 Message to Master queued w/err=0: serial=47602 error=0 09:59:25 Received message from Master: op=Filter serial=47603 09:59:25 Color wheel filter change from 0 to 0 09:59:25 FLIGetFilterPos err=0 currentPosition=0 09:59:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:59:25 Filter is already there-color wheel unchanged 09:59:25 Received message from Master: op=Shutter serial=47604 09:59:25 Shutter LASER open 09:59:25 Received message from Camera: op=State serial=47606 09:59:25 GetSingleValue result=40 Value=cccccccc 09:59:25 SkyScan query 09:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:59:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:26 Parameters OK 09:59:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:26 Set A/D data flow result=40 09:59:26 Set A/D channel type result=40 09:59:26 Set A/D encoding result=40 09:59:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:26 Set channel filter=0.000000e+000 result=40 09:59:26 Config A/D Result=40 09:59:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:26 Get A/D filter: -9.255963e+061 result=40 09:59:26 Get A/D value=-858993460 result=40 09:59:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:26 Parameters OK 09:59:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:26 Set A/D data flow result=40 09:59:26 Set A/D channel type result=40 09:59:26 Set A/D encoding result=40 09:59:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:26 Set channel filter=0.000000e+000 result=40 09:59:26 Config A/D Result=40 09:59:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:26 Get A/D filter: -9.255963e+061 result=40 09:59:26 Get A/D value=-858993460 result=40 09:59:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:26 Aux= 09:59:26 Message to Camera, serial 47606 queued 09:59:34 Received message from Master: op=Shutter serial=47616 09:59:34 Shutter LASER close 09:59:35 Received message from Master: op=PointingHead serial=47620 09:59:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:59:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:59:35 Point started: ret=0 09:59:35 point_skyscan result=0 09:59:36 Check angles 09:59:36 SkyScan query 09:59:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 09:59:36 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 09:59:37 Check angles 09:59:37 SkyScan query 09:59:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 09:59:37 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 09:59:37 Check angles 09:59:37 SkyScan query 09:59:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 09:59:38 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 09:59:38 Check angles 09:59:38 SkyScan query 09:59:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 09:59:39 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 09:59:39 Check angles 09:59:39 SkyScan query 09:59:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 09:59:39 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 09:59:40 Check angles 09:59:40 SkyScan query 09:59:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 09:59:40 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 09:59:40 Check angles 09:59:40 SkyScan query 09:59:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 09:59:41 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 09:59:41 Check angles 09:59:41 SkyScan query 09:59:42 SkyScan query done: ret=0 az=112.995<-7533 ze=3.69<-11754 Statuses=0008 0009 09:59:42 Msec=5250 True Az=112.995 Ze=3.69 Az status=0008 Ze status=0009 09:59:42 Check angles 09:59:42 SkyScan query 09:59:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:59:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:59:42 Message to Master queued w/err=0: serial=47620 error=0 09:59:47 Received message from Master: op=Filter serial=47621 09:59:47 Color wheel filter change from 0 to 0 09:59:47 FLIGetFilterPos err=0 currentPosition=0 09:59:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:59:47 Filter is already there-color wheel unchanged 09:59:48 Received message from Master: op=Shutter serial=47622 09:59:48 Shutter LASER close 09:59:48 Received message from Camera: op=State serial=47624 09:59:48 GetSingleValue result=40 Value=cccccccc 09:59:48 SkyScan query 09:59:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:59:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:48 Parameters OK 09:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:48 Set A/D data flow result=40 09:59:48 Set A/D channel type result=40 09:59:48 Set A/D encoding result=40 09:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:48 Set channel filter=0.000000e+000 result=40 09:59:48 Config A/D Result=40 09:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:48 Get A/D filter: -9.255963e+061 result=40 09:59:48 Get A/D value=-858993460 result=40 09:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:48 Parameters OK 09:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:48 Set A/D data flow result=40 09:59:48 Set A/D channel type result=40 09:59:48 Set A/D encoding result=40 09:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:48 Set channel filter=0.000000e+000 result=40 09:59:48 Config A/D Result=40 09:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:48 Get A/D filter: -9.255963e+061 result=40 09:59:48 Get A/D value=-858993460 result=40 09:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:48 Aux= 09:59:48 Message to Camera, serial 47624 queued 10:00:25 Received message from Master: op=PointingHead serial=47637 10:00:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:00:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:00:25 Point started: ret=0 10:00:25 point_skyscan result=0 10:00:26 Check angles 10:00:26 SkyScan query 10:00:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:00:27 Message to Master queued w/err=0: serial=47637 error=0 10:00:32 Received message from Master: op=Filter serial=47638 10:00:32 Color wheel filter change from 0 to 0 10:00:32 FLIGetFilterPos err=0 currentPosition=0 10:00:32 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:32 Filter is already there-color wheel unchanged 10:00:32 Received message from Master: op=Shutter serial=47639 10:00:32 Shutter LASER close 10:00:32 Received message from Camera: op=State serial=47641 10:00:32 GetSingleValue result=40 Value=cccccccc 10:00:32 SkyScan query 10:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:33 Parameters OK 10:00:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:33 Set A/D data flow result=40 10:00:33 Set A/D channel type result=40 10:00:33 Set A/D encoding result=40 10:00:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:33 Set channel filter=0.000000e+000 result=40 10:00:33 Config A/D Result=40 10:00:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:33 Get A/D filter: -9.255963e+061 result=40 10:00:33 Get A/D value=-858993460 result=40 10:00:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:33 Parameters OK 10:00:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:33 Set A/D data flow result=40 10:00:33 Set A/D channel type result=40 10:00:33 Set A/D encoding result=40 10:00:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:33 Set channel filter=0.000000e+000 result=40 10:00:33 Config A/D Result=40 10:00:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:33 Get A/D filter: -9.255963e+061 result=40 10:00:33 Get A/D value=-858993460 result=40 10:00:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:33 Aux= 10:00:33 Message to Camera, serial 47641 queued 10:01:09 Received message from Master: op=PointingHead serial=47654 10:01:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:01:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:01:10 Point started: ret=0 10:01:10 point_skyscan result=0 10:01:11 Check angles 10:01:11 SkyScan query 10:01:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:01:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:01:11 Message to Master queued w/err=0: serial=47654 error=0 10:01:16 Received message from Master: op=Filter serial=47655 10:01:16 Color wheel filter change from 0 to 0 10:01:16 FLIGetFilterPos err=0 currentPosition=0 10:01:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:16 Filter is already there-color wheel unchanged 10:01:16 Received message from Master: op=Shutter serial=47656 10:01:16 Shutter LASER close 10:01:16 Received message from Camera: op=State serial=47658 10:01:16 GetSingleValue result=40 Value=cccccccc 10:01:16 SkyScan query 10:01:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:01:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:17 Parameters OK 10:01:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:17 Set A/D data flow result=40 10:01:17 Set A/D channel type result=40 10:01:17 Set A/D encoding result=40 10:01:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:17 Set channel filter=0.000000e+000 result=40 10:01:17 Config A/D Result=40 10:01:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:17 Get A/D filter: -9.255963e+061 result=40 10:01:17 Get A/D value=-858993460 result=40 10:01:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:17 Parameters OK 10:01:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:17 Set A/D data flow result=40 10:01:17 Set A/D channel type result=40 10:01:17 Set A/D encoding result=40 10:01:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:17 Set channel filter=0.000000e+000 result=40 10:01:17 Config A/D Result=40 10:01:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:17 Get A/D filter: -9.255963e+061 result=40 10:01:17 Get A/D value=-858993460 result=40 10:01:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:17 Aux= 10:01:17 Message to Camera, serial 47658 queued 10:01:54 Received message from Master: op=PointingHead serial=47671 10:01:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:01:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:01:54 Point started: ret=0 10:01:54 point_skyscan result=0 10:01:55 Check angles 10:01:55 SkyScan query 10:01:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:01:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:01:55 Message to Master queued w/err=0: serial=47671 error=0 10:02:00 Received message from Master: op=Filter serial=47672 10:02:00 Color wheel filter change from 0 to 0 10:02:00 FLIGetFilterPos err=0 currentPosition=0 10:02:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:00 Filter is already there-color wheel unchanged 10:02:01 Received message from Master: op=Shutter serial=47673 10:02:01 Shutter LASER close 10:02:01 Received message from Camera: op=State serial=47675 10:02:01 GetSingleValue result=40 Value=cccccccc 10:02:01 SkyScan query 10:02:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:02:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:01 Parameters OK 10:02:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:01 Set A/D data flow result=40 10:02:01 Set A/D channel type result=40 10:02:01 Set A/D encoding result=40 10:02:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:01 Set channel filter=0.000000e+000 result=40 10:02:01 Config A/D Result=40 10:02:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:01 Get A/D filter: -9.255963e+061 result=40 10:02:01 Get A/D value=-858993460 result=40 10:02:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:01 Parameters OK 10:02:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:01 Set A/D data flow result=40 10:02:01 Set A/D channel type result=40 10:02:01 Set A/D encoding result=40 10:02:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:01 Set channel filter=0.000000e+000 result=40 10:02:01 Config A/D Result=40 10:02:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:01 Get A/D filter: -9.255963e+061 result=40 10:02:01 Get A/D value=-858993460 result=40 10:02:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:01 Aux= 10:02:01 Message to Camera, serial 47675 queued 10:02:37 Received message from Master: op=PointingHead serial=47687 10:02:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:02:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:02:37 Point started: ret=0 10:02:37 point_skyscan result=0 10:02:38 Check angles 10:02:38 SkyScan query 10:02:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 10:02:39 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 10:02:39 Check angles 10:02:39 SkyScan query 10:02:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 10:02:39 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 10:02:40 Check angles 10:02:40 SkyScan query 10:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 10:02:40 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 10:02:40 Check angles 10:02:40 SkyScan query 10:02:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.73<-17782 Statuses=0008 0009 10:02:41 Msec=2250 True Az=112.995 Ze=-86.73 Az status=0008 Ze status=0009 10:02:41 Check angles 10:02:41 SkyScan query 10:02:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 10:02:42 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 10:02:42 Check angles 10:02:42 SkyScan query 10:02:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.06<-20604 Statuses=0008 0009 10:02:43 Msec=3750 True Az=112.995 Ze=-129.06 Az status=0008 Ze status=0009 10:02:43 Check angles 10:02:43 SkyScan query 10:02:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.015<-22001 Statuses=0008 0009 10:02:43 Msec=4500 True Az=112.995 Ze=-150.015 Az status=0008 Ze status=0009 10:02:43 Check angles 10:02:43 SkyScan query 10:02:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0008 0009 10:02:44 Msec=5250 True Az=112.995 Ze=-170.865 Az status=0008 Ze status=0009 10:02:44 Check angles 10:02:44 SkyScan query 10:02:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:02:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:02:45 Message to Master queued w/err=0: serial=47687 error=0 10:02:50 Received message from Master: op=Filter serial=47688 10:02:50 Color wheel filter change from 0 to 0 10:02:50 FLIGetFilterPos err=0 currentPosition=0 10:02:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:50 Filter is already there-color wheel unchanged 10:02:50 Received message from Master: op=Shutter serial=47689 10:02:50 Shutter LASER open 10:02:50 Received message from Camera: op=State serial=47691 10:02:50 GetSingleValue result=40 Value=cccccccc 10:02:50 SkyScan query 10:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:02:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:51 Parameters OK 10:02:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:51 Set A/D data flow result=40 10:02:51 Set A/D channel type result=40 10:02:51 Set A/D encoding result=40 10:02:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:51 Set channel filter=0.000000e+000 result=40 10:02:51 Config A/D Result=40 10:02:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:51 Get A/D filter: -9.255963e+061 result=40 10:02:51 Get A/D value=-858993460 result=40 10:02:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:51 Parameters OK 10:02:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:51 Set A/D data flow result=40 10:02:51 Set A/D channel type result=40 10:02:51 Set A/D encoding result=40 10:02:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:51 Set channel filter=0.000000e+000 result=40 10:02:51 Config A/D Result=40 10:02:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:51 Get A/D filter: -9.255963e+061 result=40 10:02:51 Get A/D value=-858993460 result=40 10:02:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:51 Aux= 10:02:51 Message to Camera, serial 47691 queued 10:02:59 Received message from Master: op=Shutter serial=47701 10:02:59 Shutter LASER close 10:03:00 Received message from Master: op=PointingHead serial=47705 10:03:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:03:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:03:00 Point started: ret=0 10:03:00 point_skyscan result=0 10:03:01 Check angles 10:03:01 SkyScan query 10:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.13<-21542 Statuses=0008 0009 10:03:01 Msec=0 True Az=112.995 Ze=-143.13 Az status=0008 Ze status=0009 10:03:02 Check angles 10:03:02 SkyScan query 10:03:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 10:03:02 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 10:03:02 Check angles 10:03:02 SkyScan query 10:03:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 10:03:03 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 10:03:03 Check angles 10:03:03 SkyScan query 10:03:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 10:03:04 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 10:03:04 Check angles 10:03:04 SkyScan query 10:03:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.325<-15955 Statuses=0008 0009 10:03:04 Msec=3000 True Az=112.995 Ze=-59.325 Az status=0008 Ze status=0009 10:03:05 Check angles 10:03:05 SkyScan query 10:03:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.355<-14557 Statuses=0008 0009 10:03:05 Msec=3750 True Az=112.995 Ze=-38.355 Az status=0008 Ze status=0009 10:03:05 Check angles 10:03:05 SkyScan query 10:03:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.415<-13161 Statuses=0008 0009 10:03:06 Msec=4500 True Az=112.995 Ze=-17.415 Az status=0008 Ze status=0009 10:03:06 Check angles 10:03:06 SkyScan query 10:03:07 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 10:03:07 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 10:03:07 Check angles 10:03:07 SkyScan query 10:03:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:03:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:03:07 Message to Master queued w/err=0: serial=47705 error=0 10:03:12 Received message from Master: op=Filter serial=47706 10:03:12 Color wheel filter change from 0 to 0 10:03:12 FLIGetFilterPos err=0 currentPosition=0 10:03:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:12 Filter is already there-color wheel unchanged 10:03:13 Received message from Master: op=Shutter serial=47707 10:03:13 Shutter LASER close 10:03:13 Received message from Camera: op=State serial=47709 10:03:13 GetSingleValue result=40 Value=cccccccc 10:03:13 SkyScan query 10:03:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:03:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:13 Parameters OK 10:03:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:13 Set A/D data flow result=40 10:03:13 Set A/D channel type result=40 10:03:13 Set A/D encoding result=40 10:03:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:13 Set channel filter=0.000000e+000 result=40 10:03:13 Config A/D Result=40 10:03:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:13 Get A/D filter: -9.255963e+061 result=40 10:03:13 Get A/D value=-858993460 result=40 10:03:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:13 Parameters OK 10:03:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:13 Set A/D data flow result=40 10:03:13 Set A/D channel type result=40 10:03:13 Set A/D encoding result=40 10:03:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:13 Set channel filter=0.000000e+000 result=40 10:03:13 Config A/D Result=40 10:03:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:13 Get A/D filter: -9.255963e+061 result=40 10:03:13 Get A/D value=-858993460 result=40 10:03:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:13 Aux= 10:03:13 Message to Camera, serial 47709 queued 10:03:38 Received message from Master: op=Identify serial=47710 [UTC 2019-3-1 10:03:50] 10:03:50 Received message from Master: op=PointingHead serial=47725 10:03:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:03:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:03:51 Point started: ret=0 10:03:51 point_skyscan result=0 10:03:51 Check angles 10:03:51 SkyScan query 10:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:03:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:03:52 Message to Master queued w/err=0: serial=47725 error=0 10:03:57 Received message from Master: op=Filter serial=47726 10:03:57 Color wheel filter change from 0 to 0 10:03:57 FLIGetFilterPos err=0 currentPosition=0 10:03:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:57 Filter is already there-color wheel unchanged 10:03:57 Received message from Master: op=Shutter serial=47727 10:03:57 Shutter LASER close 10:03:57 Received message from Camera: op=State serial=47729 10:03:57 GetSingleValue result=40 Value=cccccccc 10:03:57 SkyScan query 10:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:03:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:58 Parameters OK 10:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:58 Set A/D data flow result=40 10:03:58 Set A/D channel type result=40 10:03:58 Set A/D encoding result=40 10:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:58 Set channel filter=0.000000e+000 result=40 10:03:58 Config A/D Result=40 10:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:58 Get A/D filter: -9.255963e+061 result=40 10:03:58 Get A/D value=-858993460 result=40 10:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:58 Parameters OK 10:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:58 Set A/D data flow result=40 10:03:58 Set A/D channel type result=40 10:03:58 Set A/D encoding result=40 10:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:58 Set channel filter=0.000000e+000 result=40 10:03:58 Config A/D Result=40 10:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:58 Get A/D filter: -9.255963e+061 result=40 10:03:58 Get A/D value=-858993460 result=40 10:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:58 Aux= 10:03:58 Message to Camera, serial 47729 queued 10:04:35 Received message from Master: op=PointingHead serial=47742 10:04:35 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:04:35 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:04:35 Point started: ret=0 10:04:35 point_skyscan result=0 10:04:36 Check angles 10:04:36 SkyScan query 10:04:36 SkyScan query done: ret=0 az=135.975<-9065 ze=-6.51<-12434 Statuses=0009 0008 10:04:36 Msec=0 True Az=135.975 Ze=-6.51 Az status=0009 Ze status=0008 10:04:36 Check angles 10:04:36 SkyScan query 10:04:37 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 10:04:37 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 10:04:37 Check angles 10:04:37 SkyScan query 10:04:38 SkyScan query done: ret=0 az=170.91<-11394 ze=-6.495<-12433 Statuses=0009 0008 10:04:38 Msec=1500 True Az=170.91 Ze=-6.495 Az status=0009 Ze status=0008 10:04:38 Check angles 10:04:38 SkyScan query 10:04:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:04:38 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:04:38 Message to Master queued w/err=0: serial=47742 error=0 10:04:43 Received message from Master: op=Filter serial=47743 10:04:43 Color wheel filter change from 0 to 0 10:04:43 FLIGetFilterPos err=0 currentPosition=0 10:04:43 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:43 Filter is already there-color wheel unchanged 10:04:44 Received message from Master: op=Shutter serial=47744 10:04:44 Shutter LASER close 10:04:44 Received message from Camera: op=State serial=47746 10:04:44 GetSingleValue result=40 Value=cccccccc 10:04:44 SkyScan query 10:04:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:04:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:44 Parameters OK 10:04:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:44 Set A/D data flow result=40 10:04:44 Set A/D channel type result=40 10:04:44 Set A/D encoding result=40 10:04:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:44 Set channel filter=0.000000e+000 result=40 10:04:44 Config A/D Result=40 10:04:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:44 Get A/D filter: -9.255963e+061 result=40 10:04:44 Get A/D value=-858993460 result=40 10:04:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:44 Parameters OK 10:04:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:44 Set A/D data flow result=40 10:04:44 Set A/D channel type result=40 10:04:44 Set A/D encoding result=40 10:04:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:44 Set channel filter=0.000000e+000 result=40 10:04:44 Config A/D Result=40 10:04:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:44 Get A/D filter: -9.255963e+061 result=40 10:04:44 Get A/D value=-858993460 result=40 10:04:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:44 Aux= 10:04:44 Message to Camera, serial 47746 queued 10:05:21 Received message from Master: op=PointingHead serial=47759 10:05:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:05:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:05:21 Point started: ret=0 10:05:21 point_skyscan result=0 10:05:22 Check angles 10:05:22 SkyScan query 10:05:23 SkyScan query done: ret=0 az=152.67<-10178 ze=6.51<-11566 Statuses=0009 0008 10:05:23 Msec=0 True Az=152.67 Ze=6.51 Az status=0009 Ze status=0008 10:05:23 Check angles 10:05:23 SkyScan query 10:05:24 SkyScan query done: ret=0 az=134.79<-8986 ze=6.495<-11567 Statuses=0009 0008 10:05:24 Msec=750 True Az=134.79 Ze=6.495 Az status=0009 Ze status=0008 10:05:24 Check angles 10:05:24 SkyScan query 10:05:24 SkyScan query done: ret=0 az=117.315<-7821 ze=6.495<-11567 Statuses=0009 0008 10:05:24 Msec=1500 True Az=117.315 Ze=6.495 Az status=0009 Ze status=0008 10:05:24 Check angles 10:05:24 SkyScan query 10:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:05:25 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:05:25 Message to Master queued w/err=0: serial=47759 error=0 10:05:30 Received message from Master: op=Filter serial=47760 10:05:30 Color wheel filter change from 0 to 0 10:05:30 FLIGetFilterPos err=0 currentPosition=0 10:05:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:30 Filter is already there-color wheel unchanged 10:05:30 Received message from Master: op=Shutter serial=47761 10:05:30 Shutter LASER close 10:05:30 Received message from Camera: op=State serial=47763 10:05:30 GetSingleValue result=40 Value=cccccccc 10:05:30 SkyScan query 10:05:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:05:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:31 Parameters OK 10:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:31 Set A/D data flow result=40 10:05:31 Set A/D channel type result=40 10:05:31 Set A/D encoding result=40 10:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:31 Set channel filter=0.000000e+000 result=40 10:05:31 Config A/D Result=40 10:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:31 Get A/D filter: -9.255963e+061 result=40 10:05:31 Get A/D value=-858993460 result=40 10:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:31 Parameters OK 10:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:31 Set A/D data flow result=40 10:05:31 Set A/D channel type result=40 10:05:31 Set A/D encoding result=40 10:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:31 Set channel filter=0.000000e+000 result=40 10:05:31 Config A/D Result=40 10:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:31 Get A/D filter: -9.255963e+061 result=40 10:05:31 Get A/D value=-858993460 result=40 10:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:31 Aux= 10:05:31 Message to Camera, serial 47763 queued 10:06:08 Received message from Master: op=PointingHead serial=47776 10:06:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:06:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:06:08 Point started: ret=0 10:06:08 point_skyscan result=0 10:06:09 Check angles 10:06:09 SkyScan query 10:06:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 10:06:09 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 10:06:09 Check angles 10:06:09 SkyScan query 10:06:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 10:06:10 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 10:06:10 Check angles 10:06:10 SkyScan query 10:06:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 10:06:11 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 10:06:11 Check angles 10:06:11 SkyScan query 10:06:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.935<-17729 Statuses=0008 0009 10:06:12 Msec=2250 True Az=112.995 Ze=-85.935 Az status=0008 Ze status=0009 10:06:12 Check angles 10:06:12 SkyScan query 10:06:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 10:06:12 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 10:06:12 Check angles 10:06:12 SkyScan query 10:06:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.83<-20522 Statuses=0008 0009 10:06:13 Msec=3750 True Az=112.995 Ze=-127.83 Az status=0008 Ze status=0009 10:06:13 Check angles 10:06:13 SkyScan query 10:06:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.785<-21919 Statuses=0008 0009 10:06:14 Msec=4500 True Az=112.995 Ze=-148.785 Az status=0008 Ze status=0009 10:06:14 Check angles 10:06:14 SkyScan query 10:06:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.725<-23315 Statuses=0008 0009 10:06:15 Msec=5250 True Az=112.995 Ze=-169.725 Az status=0008 Ze status=0009 10:06:15 Check angles 10:06:15 SkyScan query 10:06:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:06:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:06:15 Message to Master queued w/err=0: serial=47776 error=0 10:06:20 Received message from Master: op=Filter serial=47777 10:06:20 Color wheel filter change from 0 to 0 10:06:20 FLIGetFilterPos err=0 currentPosition=0 10:06:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:20 Filter is already there-color wheel unchanged 10:06:20 Received message from Master: op=Shutter serial=47778 10:06:20 Shutter LASER open 10:06:21 Received message from Camera: op=State serial=47780 10:06:21 GetSingleValue result=40 Value=cccccccc 10:06:21 SkyScan query 10:06:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:06:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:21 Parameters OK 10:06:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:21 Set A/D data flow result=40 10:06:21 Set A/D channel type result=40 10:06:21 Set A/D encoding result=40 10:06:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:21 Set channel filter=0.000000e+000 result=40 10:06:21 Config A/D Result=40 10:06:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:21 Get A/D filter: -9.255963e+061 result=40 10:06:21 Get A/D value=-858993460 result=40 10:06:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:21 Parameters OK 10:06:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:21 Set A/D data flow result=40 10:06:21 Set A/D channel type result=40 10:06:21 Set A/D encoding result=40 10:06:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:21 Set channel filter=0.000000e+000 result=40 10:06:21 Config A/D Result=40 10:06:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:21 Get A/D filter: -9.255963e+061 result=40 10:06:21 Get A/D value=-858993460 result=40 10:06:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:21 Aux= 10:06:21 Message to Camera, serial 47780 queued 10:06:30 Received message from Master: op=Shutter serial=47790 10:06:30 Shutter LASER close 10:06:30 Received message from Master: op=PointingHead serial=47794 10:06:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:06:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:06:30 Point started: ret=0 10:06:30 point_skyscan result=0 10:06:31 Check angles 10:06:31 SkyScan query 10:06:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 10:06:32 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 10:06:32 Check angles 10:06:32 SkyScan query 10:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 10:06:33 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 10:06:33 Check angles 10:06:33 SkyScan query 10:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 10:06:33 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 10:06:33 Check angles 10:06:33 SkyScan query 10:06:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.07<-17338 Statuses=0008 0009 10:06:34 Msec=2250 True Az=112.995 Ze=-80.07 Az status=0008 Ze status=0009 10:06:34 Check angles 10:06:34 SkyScan query 10:06:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.115<-15941 Statuses=0008 0009 10:06:35 Msec=3000 True Az=112.995 Ze=-59.115 Az status=0008 Ze status=0009 10:06:35 Check angles 10:06:35 SkyScan query 10:06:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.13<-14542 Statuses=0008 0009 10:06:36 Msec=3750 True Az=112.995 Ze=-38.13 Az status=0008 Ze status=0009 10:06:36 Check angles 10:06:36 SkyScan query 10:06:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 10:06:36 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 10:06:36 Check angles 10:06:36 SkyScan query 10:06:37 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 10:06:37 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 10:06:37 Check angles 10:06:37 SkyScan query 10:06:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:06:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:06:38 Message to Master queued w/err=0: serial=47794 error=0 10:06:43 Received message from Master: op=Filter serial=47795 10:06:43 Color wheel filter change from 0 to 0 10:06:43 FLIGetFilterPos err=0 currentPosition=0 10:06:43 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:43 Filter is already there-color wheel unchanged 10:06:43 Received message from Master: op=Shutter serial=47796 10:06:43 Shutter LASER close 10:06:43 Received message from Camera: op=State serial=47798 10:06:43 GetSingleValue result=40 Value=cccccccc 10:06:43 SkyScan query 10:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:06:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:44 Parameters OK 10:06:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:44 Set A/D data flow result=40 10:06:44 Set A/D channel type result=40 10:06:44 Set A/D encoding result=40 10:06:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:44 Set channel filter=0.000000e+000 result=40 10:06:44 Config A/D Result=40 10:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:44 Get A/D filter: -9.255963e+061 result=40 10:06:44 Get A/D value=-858993460 result=40 10:06:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:44 Parameters OK 10:06:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:44 Set A/D data flow result=40 10:06:44 Set A/D channel type result=40 10:06:44 Set A/D encoding result=40 10:06:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:44 Set channel filter=0.000000e+000 result=40 10:06:44 Config A/D Result=40 10:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:44 Get A/D filter: -9.255963e+061 result=40 10:06:44 Get A/D value=-858993460 result=40 10:06:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:44 Aux= 10:06:44 Message to Camera, serial 47798 queued 10:07:21 Received message from Master: op=PointingHead serial=47811 10:07:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:07:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:07:21 Point started: ret=0 10:07:21 point_skyscan result=0 10:07:22 Check angles 10:07:22 SkyScan query 10:07:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:07:22 Message to Master queued w/err=0: serial=47811 error=0 10:07:27 Received message from Master: op=Filter serial=47812 10:07:27 Color wheel filter change from 0 to 0 10:07:27 FLIGetFilterPos err=0 currentPosition=0 10:07:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:27 Filter is already there-color wheel unchanged 10:07:27 Received message from Master: op=Shutter serial=47813 10:07:27 Shutter LASER close 10:07:27 Received message from Camera: op=State serial=47815 10:07:27 GetSingleValue result=40 Value=cccccccc 10:07:27 SkyScan query 10:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:28 Parameters OK 10:07:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:28 Set A/D data flow result=40 10:07:28 Set A/D channel type result=40 10:07:28 Set A/D encoding result=40 10:07:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:28 Set channel filter=0.000000e+000 result=40 10:07:28 Config A/D Result=40 10:07:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:28 Get A/D filter: -9.255963e+061 result=40 10:07:28 Get A/D value=-858993460 result=40 10:07:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:28 Parameters OK 10:07:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:28 Set A/D data flow result=40 10:07:28 Set A/D channel type result=40 10:07:28 Set A/D encoding result=40 10:07:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:28 Set channel filter=0.000000e+000 result=40 10:07:28 Config A/D Result=40 10:07:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:28 Get A/D filter: -9.255963e+061 result=40 10:07:28 Get A/D value=-858993460 result=40 10:07:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:28 Aux= 10:07:28 Message to Camera, serial 47815 queued 10:08:05 Received message from Master: op=PointingHead serial=47828 10:08:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:08:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:08:05 Point started: ret=0 10:08:05 point_skyscan result=0 10:08:06 Check angles 10:08:06 SkyScan query 10:08:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:08:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:08:07 Message to Master queued w/err=0: serial=47828 error=0 10:08:12 Received message from Master: op=Filter serial=47829 10:08:12 Color wheel filter change from 0 to 0 10:08:12 FLIGetFilterPos err=0 currentPosition=0 10:08:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:12 Filter is already there-color wheel unchanged 10:08:12 Received message from Master: op=Shutter serial=47830 10:08:12 Shutter LASER close 10:08:12 Received message from Camera: op=State serial=47832 10:08:12 GetSingleValue result=40 Value=cccccccc 10:08:12 SkyScan query 10:08:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:08:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:12 Parameters OK 10:08:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:12 Set A/D data flow result=40 10:08:12 Set A/D channel type result=40 10:08:12 Set A/D encoding result=40 10:08:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:12 Set channel filter=0.000000e+000 result=40 10:08:12 Config A/D Result=40 10:08:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:12 Get A/D filter: -9.255963e+061 result=40 10:08:12 Get A/D value=-858993460 result=40 10:08:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:12 Parameters OK 10:08:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:12 Set A/D data flow result=40 10:08:12 Set A/D channel type result=40 10:08:12 Set A/D encoding result=40 10:08:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:12 Set channel filter=0.000000e+000 result=40 10:08:12 Config A/D Result=40 10:08:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:12 Get A/D filter: -9.255963e+061 result=40 10:08:12 Get A/D value=-858993460 result=40 10:08:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:12 Aux= 10:08:12 Message to Camera, serial 47832 queued 10:08:49 Received message from Master: op=PointingHead serial=47845 10:08:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:08:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:08:50 Point started: ret=0 10:08:50 point_skyscan result=0 10:08:50 Check angles 10:08:50 SkyScan query 10:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:08:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:08:51 Message to Master queued w/err=0: serial=47845 error=0 10:08:56 Received message from Master: op=Filter serial=47846 10:08:56 Color wheel filter change from 0 to 0 10:08:56 FLIGetFilterPos err=0 currentPosition=0 10:08:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:56 Filter is already there-color wheel unchanged 10:08:56 Received message from Master: op=Shutter serial=47847 10:08:56 Shutter LASER close 10:08:56 Received message from Camera: op=State serial=47849 10:08:56 GetSingleValue result=40 Value=cccccccc 10:08:56 SkyScan query 10:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:08:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:57 Parameters OK 10:08:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:57 Set A/D data flow result=40 10:08:57 Set A/D channel type result=40 10:08:57 Set A/D encoding result=40 10:08:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:57 Set channel filter=0.000000e+000 result=40 10:08:57 Config A/D Result=40 10:08:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:57 Get A/D filter: -9.255963e+061 result=40 10:08:57 Get A/D value=-858993460 result=40 10:08:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:57 Parameters OK 10:08:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:57 Set A/D data flow result=40 10:08:57 Set A/D channel type result=40 10:08:57 Set A/D encoding result=40 10:08:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:57 Set channel filter=0.000000e+000 result=40 10:08:57 Config A/D Result=40 10:08:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:57 Get A/D filter: -9.255963e+061 result=40 10:08:57 Get A/D value=-858993460 result=40 10:08:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:57 Aux= 10:08:57 Message to Camera, serial 47849 queued 10:09:33 Received message from Master: op=PointingHead serial=47861 10:09:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:09:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:09:33 Point started: ret=0 10:09:33 point_skyscan result=0 10:09:34 Check angles 10:09:34 SkyScan query 10:09:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 10:09:34 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 10:09:34 Check angles 10:09:34 SkyScan query 10:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 10:09:35 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 10:09:35 Check angles 10:09:35 SkyScan query 10:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.98<-16332 Statuses=0008 0009 10:09:36 Msec=1500 True Az=112.995 Ze=-64.98 Az status=0008 Ze status=0009 10:09:36 Check angles 10:09:36 SkyScan query 10:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.935<-17729 Statuses=0008 0009 10:09:36 Msec=2250 True Az=112.995 Ze=-85.935 Az status=0008 Ze status=0009 10:09:37 Check angles 10:09:37 SkyScan query 10:09:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 10:09:37 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 10:09:37 Check angles 10:09:37 SkyScan query 10:09:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.845<-20523 Statuses=0008 0009 10:09:38 Msec=3750 True Az=112.995 Ze=-127.845 Az status=0008 Ze status=0009 10:09:38 Check angles 10:09:38 SkyScan query 10:09:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.8<-21920 Statuses=0008 0009 10:09:39 Msec=4500 True Az=112.995 Ze=-148.8 Az status=0008 Ze status=0009 10:09:39 Check angles 10:09:39 SkyScan query 10:09:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.74<-23316 Statuses=0008 0009 10:09:39 Msec=5250 True Az=112.995 Ze=-169.74 Az status=0008 Ze status=0009 10:09:40 Check angles 10:09:40 SkyScan query 10:09:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:09:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:09:40 Message to Master queued w/err=0: serial=47861 error=0 10:09:45 Received message from Master: op=Filter serial=47862 10:09:45 Color wheel filter change from 0 to 0 10:09:45 FLIGetFilterPos err=0 currentPosition=0 10:09:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:45 Filter is already there-color wheel unchanged 10:09:45 Received message from Master: op=Shutter serial=47863 10:09:45 Shutter LASER open 10:09:46 Received message from Camera: op=State serial=47865 10:09:46 GetSingleValue result=40 Value=cccccccc 10:09:46 SkyScan query 10:09:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:09:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:46 Parameters OK 10:09:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:46 Set A/D data flow result=40 10:09:46 Set A/D channel type result=40 10:09:46 Set A/D encoding result=40 10:09:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:46 Set channel filter=0.000000e+000 result=40 10:09:46 Config A/D Result=40 10:09:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:46 Get A/D filter: -9.255963e+061 result=40 10:09:46 Get A/D value=-858993460 result=40 10:09:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:46 Parameters OK 10:09:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:46 Set A/D data flow result=40 10:09:46 Set A/D channel type result=40 10:09:46 Set A/D encoding result=40 10:09:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:46 Set channel filter=0.000000e+000 result=40 10:09:46 Config A/D Result=40 10:09:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:46 Get A/D filter: -9.255963e+061 result=40 10:09:46 Get A/D value=-858993460 result=40 10:09:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:46 Aux= 10:09:46 Message to Camera, serial 47865 queued 10:09:55 Received message from Master: op=Shutter serial=47875 10:09:55 Shutter LASER close 10:09:55 Received message from Master: op=PointingHead serial=47879 10:09:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:09:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:09:55 Point started: ret=0 10:09:55 point_skyscan result=0 10:09:56 Check angles 10:09:56 SkyScan query 10:09:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.535<-21569 Statuses=0008 0009 10:09:57 Msec=0 True Az=112.995 Ze=-143.535 Az status=0008 Ze status=0009 10:09:57 Check angles 10:09:57 SkyScan query 10:09:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 10:09:58 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 10:09:58 Check angles 10:09:58 SkyScan query 10:09:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 10:09:58 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 10:09:58 Check angles 10:09:58 SkyScan query 10:09:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 10:09:59 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 10:09:59 Check angles 10:09:59 SkyScan query 10:10:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.845<-15923 Statuses=0008 0009 10:10:00 Msec=3000 True Az=112.995 Ze=-58.845 Az status=0008 Ze status=0009 10:10:00 Check angles 10:10:00 SkyScan query 10:10:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 10:10:01 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 10:10:01 Check angles 10:10:01 SkyScan query 10:10:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 10:10:01 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 10:10:01 Check angles 10:10:01 SkyScan query 10:10:02 SkyScan query done: ret=0 az=112.995<-7533 ze=4.02<-11732 Statuses=0008 0009 10:10:02 Msec=5250 True Az=112.995 Ze=4.02 Az status=0008 Ze status=0009 10:10:02 Check angles 10:10:02 SkyScan query 10:10:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:10:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:10:03 Message to Master queued w/err=0: serial=47879 error=0 10:10:08 Received message from Master: op=Filter serial=47880 10:10:08 Color wheel filter change from 0 to 0 10:10:08 FLIGetFilterPos err=0 currentPosition=0 10:10:08 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:08 Filter is already there-color wheel unchanged 10:10:08 Received message from Master: op=Shutter serial=47881 10:10:08 Shutter LASER close 10:10:08 Received message from Camera: op=State serial=47883 10:10:08 GetSingleValue result=40 Value=cccccccc 10:10:08 SkyScan query 10:10:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:10:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:09 Parameters OK 10:10:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:09 Set A/D data flow result=40 10:10:09 Set A/D channel type result=40 10:10:09 Set A/D encoding result=40 10:10:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:09 Set channel filter=0.000000e+000 result=40 10:10:09 Config A/D Result=40 10:10:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:09 Get A/D filter: -9.255963e+061 result=40 10:10:09 Get A/D value=-858993460 result=40 10:10:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:09 Parameters OK 10:10:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:09 Set A/D data flow result=40 10:10:09 Set A/D channel type result=40 10:10:09 Set A/D encoding result=40 10:10:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:09 Set channel filter=0.000000e+000 result=40 10:10:09 Config A/D Result=40 10:10:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:09 Get A/D filter: -9.255963e+061 result=40 10:10:09 Get A/D value=-858993460 result=40 10:10:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:09 Aux= 10:10:09 Message to Camera, serial 47883 queued 10:10:46 Received message from Master: op=PointingHead serial=47896 10:10:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:10:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:10:46 Point started: ret=0 10:10:46 point_skyscan result=0 10:10:47 Check angles 10:10:47 SkyScan query 10:10:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:10:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:10:47 Message to Master queued w/err=0: serial=47896 error=0 10:10:52 Received message from Master: op=Filter serial=47897 10:10:52 Color wheel filter change from 0 to 0 10:10:52 FLIGetFilterPos err=0 currentPosition=0 10:10:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:52 Filter is already there-color wheel unchanged 10:10:52 Received message from Master: op=Shutter serial=47898 10:10:52 Shutter LASER close 10:10:52 Received message from Camera: op=State serial=47900 10:10:52 GetSingleValue result=40 Value=cccccccc 10:10:52 SkyScan query 10:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:10:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:53 Parameters OK 10:10:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:53 Set A/D data flow result=40 10:10:53 Set A/D channel type result=40 10:10:53 Set A/D encoding result=40 10:10:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:53 Set channel filter=0.000000e+000 result=40 10:10:53 Config A/D Result=40 10:10:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:53 Get A/D filter: -9.255963e+061 result=40 10:10:53 Get A/D value=-858993460 result=40 10:10:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:53 Parameters OK 10:10:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:53 Set A/D data flow result=40 10:10:53 Set A/D channel type result=40 10:10:53 Set A/D encoding result=40 10:10:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:53 Set channel filter=0.000000e+000 result=40 10:10:53 Config A/D Result=40 10:10:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:53 Get A/D filter: -9.255963e+061 result=40 10:10:53 Get A/D value=-858993460 result=40 10:10:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:53 Aux= 10:10:53 Message to Camera, serial 47900 queued 10:11:30 Received message from Master: op=PointingHead serial=47913 10:11:30 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:11:30 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:11:30 Point started: ret=0 10:11:30 point_skyscan result=0 10:11:31 Check angles 10:11:31 SkyScan query 10:11:32 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 10:11:32 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 10:11:32 Check angles 10:11:32 SkyScan query 10:11:32 SkyScan query done: ret=0 az=154.05<-10270 ze=-6.495<-12433 Statuses=0009 0008 10:11:32 Msec=750 True Az=154.05 Ze=-6.495 Az status=0009 Ze status=0008 10:11:32 Check angles 10:11:32 SkyScan query 10:11:33 SkyScan query done: ret=0 az=171.525<-11435 ze=-6.495<-12433 Statuses=0009 0008 10:11:33 Msec=1500 True Az=171.525 Ze=-6.495 Az status=0009 Ze status=0008 10:11:33 Check angles 10:11:33 SkyScan query 10:11:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:11:34 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:11:34 Message to Master queued w/err=0: serial=47913 error=0 10:11:39 Received message from Master: op=Filter serial=47914 10:11:39 Color wheel filter change from 0 to 0 10:11:39 FLIGetFilterPos err=0 currentPosition=0 10:11:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:39 Filter is already there-color wheel unchanged 10:11:39 Received message from Master: op=Shutter serial=47915 10:11:39 Shutter LASER close 10:11:39 Received message from Camera: op=State serial=47917 10:11:39 GetSingleValue result=40 Value=cccccccc 10:11:39 SkyScan query 10:11:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:11:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:40 Parameters OK 10:11:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:40 Set A/D data flow result=40 10:11:40 Set A/D channel type result=40 10:11:40 Set A/D encoding result=40 10:11:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:40 Set channel filter=0.000000e+000 result=40 10:11:40 Config A/D Result=40 10:11:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:40 Get A/D filter: -9.255963e+061 result=40 10:11:40 Get A/D value=-858993460 result=40 10:11:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:40 Parameters OK 10:11:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:40 Set A/D data flow result=40 10:11:40 Set A/D channel type result=40 10:11:40 Set A/D encoding result=40 10:11:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:40 Set channel filter=0.000000e+000 result=40 10:11:40 Config A/D Result=40 10:11:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:40 Get A/D filter: -9.255963e+061 result=40 10:11:40 Get A/D value=-858993460 result=40 10:11:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:40 Aux= 10:11:40 Message to Camera, serial 47917 queued 10:12:16 Received message from Master: op=PointingHead serial=47930 10:12:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:12:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:12:17 Point started: ret=0 10:12:17 point_skyscan result=0 10:12:17 Check angles 10:12:17 SkyScan query 10:12:18 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 10:12:18 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 10:12:18 Check angles 10:12:18 SkyScan query 10:12:19 SkyScan query done: ret=0 az=135.63<-9042 ze=6.495<-11567 Statuses=0009 0008 10:12:19 Msec=750 True Az=135.63 Ze=6.495 Az status=0009 Ze status=0008 10:12:19 Check angles 10:12:19 SkyScan query 10:12:20 SkyScan query done: ret=0 az=118.11<-7874 ze=6.495<-11567 Statuses=0009 0008 10:12:20 Msec=1500 True Az=118.11 Ze=6.495 Az status=0009 Ze status=0008 10:12:20 Check angles 10:12:20 SkyScan query 10:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:12:20 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:12:20 Message to Master queued w/err=0: serial=47930 error=0 10:12:25 Received message from Master: op=Filter serial=47931 10:12:25 Color wheel filter change from 0 to 0 10:12:25 FLIGetFilterPos err=0 currentPosition=0 10:12:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:25 Filter is already there-color wheel unchanged 10:12:25 Received message from Master: op=Shutter serial=47932 10:12:25 Shutter LASER close 10:12:26 Received message from Camera: op=State serial=47934 10:12:26 GetSingleValue result=40 Value=cccccccc 10:12:26 SkyScan query 10:12:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:12:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:26 Parameters OK 10:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:26 Set A/D data flow result=40 10:12:26 Set A/D channel type result=40 10:12:26 Set A/D encoding result=40 10:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:26 Set channel filter=0.000000e+000 result=40 10:12:26 Config A/D Result=40 10:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:26 Get A/D filter: -9.255963e+061 result=40 10:12:26 Get A/D value=-858993460 result=40 10:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:26 Parameters OK 10:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:26 Set A/D data flow result=40 10:12:26 Set A/D channel type result=40 10:12:26 Set A/D encoding result=40 10:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:26 Set channel filter=0.000000e+000 result=40 10:12:26 Config A/D Result=40 10:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:26 Get A/D filter: -9.255963e+061 result=40 10:12:26 Get A/D value=-858993460 result=40 10:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:26 Aux= 10:12:26 Message to Camera, serial 47934 queued 10:13:03 Received message from Master: op=PointingHead serial=47947 10:13:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:13:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:13:03 Point started: ret=0 10:13:03 point_skyscan result=0 10:13:04 Check angles 10:13:04 SkyScan query 10:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 10:13:05 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 10:13:05 Check angles 10:13:05 SkyScan query 10:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 10:13:05 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 10:13:06 Check angles 10:13:06 SkyScan query 10:13:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 10:13:06 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 10:13:06 Check angles 10:13:06 SkyScan query 10:13:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 10:13:07 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 10:13:07 Check angles 10:13:07 SkyScan query 10:13:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 10:13:08 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 10:13:08 Check angles 10:13:08 SkyScan query 10:13:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.845<-20523 Statuses=0008 0009 10:13:08 Msec=3750 True Az=112.995 Ze=-127.845 Az status=0008 Ze status=0009 10:13:09 Check angles 10:13:09 SkyScan query 10:13:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.785<-21919 Statuses=0008 0009 10:13:09 Msec=4500 True Az=112.995 Ze=-148.785 Az status=0008 Ze status=0009 10:13:09 Check angles 10:13:09 SkyScan query 10:13:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.725<-23315 Statuses=0008 0009 10:13:10 Msec=5250 True Az=112.995 Ze=-169.725 Az status=0008 Ze status=0009 10:13:10 Check angles 10:13:10 SkyScan query 10:13:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:13:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:13:11 Message to Master queued w/err=0: serial=47947 error=0 10:13:16 Received message from Master: op=Filter serial=47948 10:13:16 Color wheel filter change from 0 to 0 10:13:16 FLIGetFilterPos err=0 currentPosition=0 10:13:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:16 Filter is already there-color wheel unchanged 10:13:16 Received message from Master: op=Shutter serial=47949 10:13:16 Shutter LASER open 10:13:16 Received message from Camera: op=State serial=47951 10:13:16 GetSingleValue result=40 Value=cccccccc 10:13:16 SkyScan query 10:13:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:13:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:17 Parameters OK 10:13:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:17 Set A/D data flow result=40 10:13:17 Set A/D channel type result=40 10:13:17 Set A/D encoding result=40 10:13:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:17 Set channel filter=0.000000e+000 result=40 10:13:17 Config A/D Result=40 10:13:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:17 Get A/D filter: -9.255963e+061 result=40 10:13:17 Get A/D value=-858993460 result=40 10:13:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:17 Parameters OK 10:13:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:17 Set A/D data flow result=40 10:13:17 Set A/D channel type result=40 10:13:17 Set A/D encoding result=40 10:13:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:17 Set channel filter=0.000000e+000 result=40 10:13:17 Config A/D Result=40 10:13:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:17 Get A/D filter: -9.255963e+061 result=40 10:13:17 Get A/D value=-858993460 result=40 10:13:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:17 Aux= 10:13:17 Message to Camera, serial 47951 queued 10:13:25 Received message from Master: op=Shutter serial=47961 10:13:25 Shutter LASER close 10:13:25 Received message from Master: op=PointingHead serial=47965 10:13:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:13:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:13:26 Point started: ret=0 10:13:26 point_skyscan result=0 10:13:27 Check angles 10:13:27 SkyScan query 10:13:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.755<-21517 Statuses=0008 0009 10:13:27 Msec=0 True Az=112.995 Ze=-142.755 Az status=0008 Ze status=0009 10:13:27 Check angles 10:13:27 SkyScan query 10:13:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.395<-20093 Statuses=0008 0009 10:13:28 Msec=750 True Az=112.995 Ze=-121.395 Az status=0008 Ze status=0009 10:13:28 Check angles 10:13:28 SkyScan query 10:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.41<-18694 Statuses=0008 0009 10:13:29 Msec=1500 True Az=112.995 Ze=-100.41 Az status=0008 Ze status=0009 10:13:29 Check angles 10:13:29 SkyScan query 10:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 10:13:29 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 10:13:30 Check angles 10:13:30 SkyScan query 10:13:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.035<-15869 Statuses=0008 0009 10:13:30 Msec=3000 True Az=112.995 Ze=-58.035 Az status=0008 Ze status=0009 10:13:30 Check angles 10:13:30 SkyScan query 10:13:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.11<-14474 Statuses=0008 0009 10:13:31 Msec=3750 True Az=112.995 Ze=-37.11 Az status=0008 Ze status=0009 10:13:31 Check angles 10:13:31 SkyScan query 10:13:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.14<-13076 Statuses=0008 0009 10:13:32 Msec=4500 True Az=112.995 Ze=-16.14 Az status=0008 Ze status=0009 10:13:32 Check angles 10:13:32 SkyScan query 10:13:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.65<-11690 Statuses=0008 0009 10:13:32 Msec=5250 True Az=112.995 Ze=4.65 Az status=0008 Ze status=0009 10:13:33 Check angles 10:13:33 SkyScan query 10:13:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:13:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:13:33 Message to Master queued w/err=0: serial=47965 error=0 10:13:38 Received message from Master: op=Filter serial=47966 10:13:38 Color wheel filter change from 0 to 0 10:13:38 FLIGetFilterPos err=0 currentPosition=0 10:13:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:38 Filter is already there-color wheel unchanged 10:13:38 Received message from Master: op=Shutter serial=47967 10:13:38 Shutter LASER close 10:13:39 Received message from Camera: op=State serial=47969 10:13:39 GetSingleValue result=40 Value=cccccccc 10:13:39 SkyScan query 10:13:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:13:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:39 Parameters OK 10:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:39 Set A/D data flow result=40 10:13:39 Set A/D channel type result=40 10:13:39 Set A/D encoding result=40 10:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:39 Set channel filter=0.000000e+000 result=40 10:13:39 Config A/D Result=40 10:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:39 Get A/D filter: -9.255963e+061 result=40 10:13:39 Get A/D value=-858993460 result=40 10:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:39 Parameters OK 10:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:39 Set A/D data flow result=40 10:13:39 Set A/D channel type result=40 [UTC 2019-3-1 10:13:39] 10:13:39 Set A/D encoding result=40 10:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:39 Set channel filter=0.000000e+000 result=40 10:13:39 Config A/D Result=40 10:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:39 Get A/D filter: -9.255963e+061 result=40 10:13:39 Get A/D value=-858993460 result=40 10:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:39 Aux= 10:13:39 Message to Camera, serial 47969 queued 10:14:16 Received message from Master: op=PointingHead serial=47982 10:14:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:14:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:14:16 Point started: ret=0 10:14:16 point_skyscan result=0 10:14:17 Check angles 10:14:17 SkyScan query 10:14:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:14:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:14:18 Message to Master queued w/err=0: serial=47982 error=0 10:14:23 Received message from Master: op=Filter serial=47983 10:14:23 Color wheel filter change from 0 to 0 10:14:23 FLIGetFilterPos err=0 currentPosition=0 10:14:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:23 Filter is already there-color wheel unchanged 10:14:23 Received message from Master: op=Shutter serial=47984 10:14:23 Shutter LASER close 10:14:23 Received message from Camera: op=State serial=47986 10:14:23 GetSingleValue result=40 Value=cccccccc 10:14:23 SkyScan query 10:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:14:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:23 Parameters OK 10:14:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:23 Set A/D data flow result=40 10:14:23 Set A/D channel type result=40 10:14:23 Set A/D encoding result=40 10:14:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:23 Set channel filter=0.000000e+000 result=40 10:14:23 Config A/D Result=40 10:14:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:23 Get A/D filter: -9.255963e+061 result=40 10:14:23 Get A/D value=-858993460 result=40 10:14:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:23 Parameters OK 10:14:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:23 Set A/D data flow result=40 10:14:23 Set A/D channel type result=40 10:14:23 Set A/D encoding result=40 10:14:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:23 Set channel filter=0.000000e+000 result=40 10:14:23 Config A/D Result=40 10:14:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:23 Get A/D filter: -9.255963e+061 result=40 10:14:23 Get A/D value=-858993460 result=40 10:14:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:23 Aux= 10:14:23 Message to Camera, serial 47986 queued 10:15:00 Received message from Master: op=PointingHead serial=47999 10:15:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:15:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:15:01 Point started: ret=0 10:15:01 point_skyscan result=0 10:15:01 Check angles 10:15:01 SkyScan query 10:15:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:15:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:15:02 Message to Master queued w/err=0: serial=47999 error=0 10:15:07 Received message from Master: op=Filter serial=48000 10:15:07 Color wheel filter change from 0 to 0 10:15:07 FLIGetFilterPos err=0 currentPosition=0 10:15:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:07 Filter is already there-color wheel unchanged 10:15:07 Received message from Master: op=Shutter serial=48001 10:15:07 Shutter LASER close 10:15:07 Received message from Camera: op=State serial=48003 10:15:07 GetSingleValue result=40 Value=cccccccc 10:15:07 SkyScan query 10:15:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:15:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:08 Parameters OK 10:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:08 Set A/D data flow result=40 10:15:08 Set A/D channel type result=40 10:15:08 Set A/D encoding result=40 10:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:08 Set channel filter=0.000000e+000 result=40 10:15:08 Config A/D Result=40 10:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:08 Get A/D filter: -9.255963e+061 result=40 10:15:08 Get A/D value=-858993460 result=40 10:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:08 Parameters OK 10:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:08 Set A/D data flow result=40 10:15:08 Set A/D channel type result=40 10:15:08 Set A/D encoding result=40 10:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:08 Set channel filter=0.000000e+000 result=40 10:15:08 Config A/D Result=40 10:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:08 Get A/D filter: -9.255963e+061 result=40 10:15:08 Get A/D value=-858993460 result=40 10:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:08 Aux= 10:15:08 Message to Camera, serial 48003 queued 10:15:45 Received message from Master: op=PointingHead serial=48016 10:15:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:15:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:15:45 Point started: ret=0 10:15:45 point_skyscan result=0 10:15:46 Check angles 10:15:46 SkyScan query 10:15:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:15:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:15:46 Message to Master queued w/err=0: serial=48016 error=0 10:15:51 Received message from Master: op=Filter serial=48017 10:15:51 Color wheel filter change from 0 to 0 10:15:51 FLIGetFilterPos err=0 currentPosition=0 10:15:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:51 Filter is already there-color wheel unchanged 10:15:51 Received message from Master: op=Shutter serial=48018 10:15:51 Shutter LASER close 10:15:51 Received message from Camera: op=State serial=48020 10:15:51 GetSingleValue result=40 Value=cccccccc 10:15:51 SkyScan query 10:15:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:15:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:52 Parameters OK 10:15:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:52 Set A/D data flow result=40 10:15:52 Set A/D channel type result=40 10:15:52 Set A/D encoding result=40 10:15:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:52 Set channel filter=0.000000e+000 result=40 10:15:52 Config A/D Result=40 10:15:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:52 Get A/D filter: -9.255963e+061 result=40 10:15:52 Get A/D value=-858993460 result=40 10:15:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:52 Parameters OK 10:15:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:52 Set A/D data flow result=40 10:15:52 Set A/D channel type result=40 10:15:52 Set A/D encoding result=40 10:15:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:52 Set channel filter=0.000000e+000 result=40 10:15:52 Config A/D Result=40 10:15:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:52 Get A/D filter: -9.255963e+061 result=40 10:15:52 Get A/D value=-858993460 result=40 10:15:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:52 Aux= 10:15:52 Message to Camera, serial 48020 queued 10:16:29 Received message from Master: op=PointingHead serial=48033 10:16:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:16:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:16:29 Point started: ret=0 10:16:29 point_skyscan result=0 10:16:30 Check angles 10:16:30 SkyScan query 10:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 10:16:31 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 10:16:31 Check angles 10:16:31 SkyScan query 10:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 10:16:31 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 10:16:31 Check angles 10:16:31 SkyScan query 10:16:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 10:16:32 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 10:16:32 Check angles 10:16:32 SkyScan query 10:16:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 10:16:33 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 10:16:33 Check angles 10:16:33 SkyScan query 10:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.91<-19194 Statuses=0008 0009 10:16:34 Msec=3000 True Az=112.995 Ze=-107.91 Az status=0008 Ze status=0009 10:16:34 Check angles 10:16:34 SkyScan query 10:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.865<-20591 Statuses=0008 0009 10:16:34 Msec=3750 True Az=112.995 Ze=-128.865 Az status=0008 Ze status=0009 10:16:34 Check angles 10:16:34 SkyScan query 10:16:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 10:16:35 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 10:16:35 Check angles 10:16:35 SkyScan query 10:16:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 10:16:36 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 10:16:36 Check angles 10:16:36 SkyScan query 10:16:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:16:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:16:37 Message to Master queued w/err=0: serial=48033 error=0 10:16:42 Received message from Master: op=Filter serial=48034 10:16:42 Color wheel filter change from 0 to 0 10:16:42 FLIGetFilterPos err=0 currentPosition=0 10:16:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:42 Filter is already there-color wheel unchanged 10:16:42 Received message from Master: op=Shutter serial=48035 10:16:42 Shutter LASER open 10:16:42 Received message from Camera: op=State serial=48037 10:16:42 GetSingleValue result=40 Value=cccccccc 10:16:42 SkyScan query 10:16:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:16:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:42 Parameters OK 10:16:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:42 Set A/D data flow result=40 10:16:42 Set A/D channel type result=40 10:16:42 Set A/D encoding result=40 10:16:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:42 Set channel filter=0.000000e+000 result=40 10:16:42 Config A/D Result=40 10:16:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:42 Get A/D filter: -9.255963e+061 result=40 10:16:42 Get A/D value=-858993460 result=40 10:16:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:42 Parameters OK 10:16:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:42 Set A/D data flow result=40 10:16:42 Set A/D channel type result=40 10:16:42 Set A/D encoding result=40 10:16:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:42 Set channel filter=0.000000e+000 result=40 10:16:42 Config A/D Result=40 10:16:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:42 Get A/D filter: -9.255963e+061 result=40 10:16:42 Get A/D value=-858993460 result=40 10:16:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:42 Aux= 10:16:42 Message to Camera, serial 48037 queued 10:16:51 Received message from Master: op=Shutter serial=48047 10:16:51 Shutter LASER close 10:16:52 Received message from Master: op=PointingHead serial=48051 10:16:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:16:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:16:52 Point started: ret=0 10:16:52 point_skyscan result=0 10:16:53 Check angles 10:16:53 SkyScan query 10:16:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 10:16:53 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 10:16:53 Check angles 10:16:53 SkyScan query 10:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 10:16:54 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 10:16:54 Check angles 10:16:54 SkyScan query 10:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.37<-18758 Statuses=0008 0009 10:16:55 Msec=1500 True Az=112.995 Ze=-101.37 Az status=0008 Ze status=0009 10:16:55 Check angles 10:16:55 SkyScan query 10:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.415<-17361 Statuses=0008 0009 10:16:55 Msec=2250 True Az=112.995 Ze=-80.415 Az status=0008 Ze status=0009 10:16:56 Check angles 10:16:56 SkyScan query 10:16:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.46<-15964 Statuses=0008 0009 10:16:56 Msec=3000 True Az=112.995 Ze=-59.46 Az status=0008 Ze status=0009 10:16:56 Check angles 10:16:56 SkyScan query 10:16:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.49<-14566 Statuses=0008 0009 10:16:57 Msec=3750 True Az=112.995 Ze=-38.49 Az status=0008 Ze status=0009 10:16:57 Check angles 10:16:57 SkyScan query 10:16:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.55<-13170 Statuses=0008 0009 10:16:58 Msec=4500 True Az=112.995 Ze=-17.55 Az status=0008 Ze status=0009 10:16:58 Check angles 10:16:58 SkyScan query 10:16:58 SkyScan query done: ret=0 az=112.995<-7533 ze=3.42<-11772 Statuses=0008 0009 10:16:58 Msec=5250 True Az=112.995 Ze=3.42 Az status=0008 Ze status=0009 10:16:59 Check angles 10:16:59 SkyScan query 10:16:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:16:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:16:59 Message to Master queued w/err=0: serial=48051 error=0 10:17:04 Received message from Master: op=Filter serial=48052 10:17:04 Color wheel filter change from 0 to 0 10:17:04 FLIGetFilterPos err=0 currentPosition=0 10:17:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:04 Filter is already there-color wheel unchanged 10:17:04 Received message from Master: op=Shutter serial=48053 10:17:04 Shutter LASER close 10:17:05 Received message from Camera: op=State serial=48055 10:17:05 GetSingleValue result=40 Value=cccccccc 10:17:05 SkyScan query 10:17:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:17:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:05 Parameters OK 10:17:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:05 Set A/D data flow result=40 10:17:05 Set A/D channel type result=40 10:17:05 Set A/D encoding result=40 10:17:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:05 Set channel filter=0.000000e+000 result=40 10:17:05 Config A/D Result=40 10:17:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:05 Get A/D filter: -9.255963e+061 result=40 10:17:05 Get A/D value=-858993460 result=40 10:17:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:05 Parameters OK 10:17:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:05 Set A/D data flow result=40 10:17:05 Set A/D channel type result=40 10:17:05 Set A/D encoding result=40 10:17:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:05 Set channel filter=0.000000e+000 result=40 10:17:05 Config A/D Result=40 10:17:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:05 Get A/D filter: -9.255963e+061 result=40 10:17:05 Get A/D value=-858993460 result=40 10:17:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:05 Aux= 10:17:05 Message to Camera, serial 48055 queued 10:17:42 Received message from Master: op=PointingHead serial=48068 10:17:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:17:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:17:42 Point started: ret=0 10:17:42 point_skyscan result=0 10:17:43 Check angles 10:17:43 SkyScan query 10:17:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:17:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:17:44 Message to Master queued w/err=0: serial=48068 error=0 10:17:49 Received message from Master: op=Filter serial=48069 10:17:49 Color wheel filter change from 0 to 0 10:17:49 FLIGetFilterPos err=0 currentPosition=0 10:17:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:49 Filter is already there-color wheel unchanged 10:17:49 Received message from Master: op=Shutter serial=48070 10:17:49 Shutter LASER close 10:17:49 Received message from Camera: op=State serial=48072 10:17:49 GetSingleValue result=40 Value=cccccccc 10:17:49 SkyScan query 10:17:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:17:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:50 Parameters OK 10:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:50 Set A/D data flow result=40 10:17:50 Set A/D channel type result=40 10:17:50 Set A/D encoding result=40 10:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:50 Set channel filter=0.000000e+000 result=40 10:17:50 Config A/D Result=40 10:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:50 Get A/D filter: -9.255963e+061 result=40 10:17:50 Get A/D value=-858993460 result=40 10:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:50 Parameters OK 10:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:50 Set A/D data flow result=40 10:17:50 Set A/D channel type result=40 10:17:50 Set A/D encoding result=40 10:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:50 Set channel filter=0.000000e+000 result=40 10:17:50 Config A/D Result=40 10:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:50 Get A/D filter: -9.255963e+061 result=40 10:17:50 Get A/D value=-858993460 result=40 10:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:50 Aux= 10:17:50 Message to Camera, serial 48072 queued 10:18:26 Received message from Master: op=PointingHead serial=48085 10:18:26 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:18:26 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:18:27 Point started: ret=0 10:18:27 point_skyscan result=0 10:18:27 Check angles 10:18:27 SkyScan query 10:18:28 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 10:18:28 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 10:18:28 Check angles 10:18:28 SkyScan query 10:18:29 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.495<-12433 Statuses=0009 0008 10:18:29 Msec=750 True Az=153.6 Ze=-6.495 Az status=0009 Ze status=0008 10:18:29 Check angles 10:18:29 SkyScan query 10:18:30 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 10:18:30 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 10:18:30 Check angles 10:18:30 SkyScan query 10:18:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:18:30 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:18:30 Message to Master queued w/err=0: serial=48085 error=0 10:18:35 Received message from Master: op=Filter serial=48086 10:18:35 Color wheel filter change from 0 to 0 10:18:35 FLIGetFilterPos err=0 currentPosition=0 10:18:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:35 Filter is already there-color wheel unchanged 10:18:35 Received message from Master: op=Shutter serial=48087 10:18:35 Shutter LASER close 10:18:35 Received message from Camera: op=State serial=48089 10:18:35 GetSingleValue result=40 Value=cccccccc 10:18:35 SkyScan query 10:18:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:18:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:36 Parameters OK 10:18:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:36 Set A/D data flow result=40 10:18:36 Set A/D channel type result=40 10:18:36 Set A/D encoding result=40 10:18:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:36 Set channel filter=0.000000e+000 result=40 10:18:36 Config A/D Result=40 10:18:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:36 Get A/D filter: -9.255963e+061 result=40 10:18:36 Get A/D value=-858993460 result=40 10:18:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:36 Parameters OK 10:18:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:36 Set A/D data flow result=40 10:18:36 Set A/D channel type result=40 10:18:36 Set A/D encoding result=40 10:18:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:36 Set channel filter=0.000000e+000 result=40 10:18:36 Config A/D Result=40 10:18:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:36 Get A/D filter: -9.255963e+061 result=40 10:18:36 Get A/D value=-858993460 result=40 10:18:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:36 Aux= 10:18:36 Message to Camera, serial 48089 queued 10:19:13 Received message from Master: op=PointingHead serial=48102 10:19:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:19:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:19:13 Point started: ret=0 10:19:13 point_skyscan result=0 10:19:14 Check angles 10:19:14 SkyScan query 10:19:15 SkyScan query done: ret=0 az=152.895<-10193 ze=6.51<-11566 Statuses=0009 0008 10:19:15 Msec=0 True Az=152.895 Ze=6.51 Az status=0009 Ze status=0008 10:19:15 Check angles 10:19:15 SkyScan query 10:19:15 SkyScan query done: ret=0 az=135.45<-9030 ze=6.495<-11567 Statuses=0009 0008 10:19:15 Msec=750 True Az=135.45 Ze=6.495 Az status=0009 Ze status=0008 10:19:15 Check angles 10:19:15 SkyScan query 10:19:16 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 10:19:16 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 10:19:16 Check angles 10:19:16 SkyScan query 10:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:19:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:19:17 Message to Master queued w/err=0: serial=48102 error=0 10:19:22 Received message from Master: op=Filter serial=48103 10:19:22 Color wheel filter change from 0 to 0 10:19:22 FLIGetFilterPos err=0 currentPosition=0 10:19:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:22 Filter is already there-color wheel unchanged 10:19:22 Received message from Master: op=Shutter serial=48104 10:19:22 Shutter LASER close 10:19:22 Received message from Camera: op=State serial=48106 10:19:22 GetSingleValue result=40 Value=cccccccc 10:19:22 SkyScan query 10:19:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:19:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:23 Parameters OK 10:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:23 Set A/D data flow result=40 10:19:23 Set A/D channel type result=40 10:19:23 Set A/D encoding result=40 10:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:23 Set channel filter=0.000000e+000 result=40 10:19:23 Config A/D Result=40 10:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:23 Get A/D filter: -9.255963e+061 result=40 10:19:23 Get A/D value=-858993460 result=40 10:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:23 Parameters OK 10:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:23 Set A/D data flow result=40 10:19:23 Set A/D channel type result=40 10:19:23 Set A/D encoding result=40 10:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:23 Set channel filter=0.000000e+000 result=40 10:19:23 Config A/D Result=40 10:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:23 Get A/D filter: -9.255963e+061 result=40 10:19:23 Get A/D value=-858993460 result=40 10:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:23 Aux= 10:19:23 Message to Camera, serial 48106 queued 10:19:59 Received message from Master: op=PointingHead serial=48119 10:19:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:19:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:20:00 Point started: ret=0 10:20:00 point_skyscan result=0 10:20:01 Check angles 10:20:01 SkyScan query 10:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 10:20:01 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 10:20:01 Check angles 10:20:01 SkyScan query 10:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.12<-15008 Statuses=0008 0009 10:20:02 Msec=750 True Az=112.995 Ze=-45.12 Az status=0008 Ze status=0009 10:20:02 Check angles 10:20:02 SkyScan query 10:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.075<-16405 Statuses=0008 0009 10:20:03 Msec=1500 True Az=112.995 Ze=-66.075 Az status=0008 Ze status=0009 10:20:03 Check angles 10:20:03 SkyScan query 10:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.03<-17802 Statuses=0008 0009 10:20:03 Msec=2250 True Az=112.995 Ze=-87.03 Az status=0008 Ze status=0009 10:20:04 Check angles 10:20:04 SkyScan query 10:20:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.985<-19199 Statuses=0008 0009 10:20:04 Msec=3000 True Az=112.995 Ze=-107.985 Az status=0008 Ze status=0009 10:20:04 Check angles 10:20:04 SkyScan query 10:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.925<-20595 Statuses=0008 0009 10:20:05 Msec=3750 True Az=112.995 Ze=-128.925 Az status=0008 Ze status=0009 10:20:05 Check angles 10:20:05 SkyScan query 10:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.88<-21992 Statuses=0008 0009 10:20:06 Msec=4500 True Az=112.995 Ze=-149.88 Az status=0008 Ze status=0009 10:20:06 Check angles 10:20:06 SkyScan query 10:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 10:20:06 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 10:20:07 Check angles 10:20:07 SkyScan query 10:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:20:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:20:07 Message to Master queued w/err=0: serial=48119 error=0 10:20:12 Received message from Master: op=Filter serial=48120 10:20:12 Color wheel filter change from 0 to 0 10:20:12 FLIGetFilterPos err=0 currentPosition=0 10:20:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:12 Filter is already there-color wheel unchanged 10:20:12 Received message from Master: op=Shutter serial=48121 10:20:12 Shutter LASER open 10:20:13 Received message from Camera: op=State serial=48123 10:20:13 GetSingleValue result=40 Value=cccccccc 10:20:13 SkyScan query 10:20:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:20:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:13 Parameters OK 10:20:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:13 Set A/D data flow result=40 10:20:13 Set A/D channel type result=40 10:20:13 Set A/D encoding result=40 10:20:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:13 Set channel filter=0.000000e+000 result=40 10:20:13 Config A/D Result=40 10:20:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:13 Get A/D filter: -9.255963e+061 result=40 10:20:13 Get A/D value=-858993460 result=40 10:20:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:13 Parameters OK 10:20:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:13 Set A/D data flow result=40 10:20:13 Set A/D channel type result=40 10:20:13 Set A/D encoding result=40 10:20:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:13 Set channel filter=0.000000e+000 result=40 10:20:13 Config A/D Result=40 10:20:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:13 Get A/D filter: -9.255963e+061 result=40 10:20:13 Get A/D value=-858993460 result=40 10:20:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:13 Aux= 10:20:13 Message to Camera, serial 48123 queued 10:20:22 Received message from Master: op=Shutter serial=48133 10:20:22 Shutter LASER close 10:20:22 Received message from Master: op=PointingHead serial=48137 10:20:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:20:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:20:22 Point started: ret=0 10:20:22 point_skyscan result=0 10:20:23 Check angles 10:20:23 SkyScan query 10:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 10:20:24 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 10:20:24 Check angles 10:20:24 SkyScan query 10:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 10:20:24 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 10:20:25 Check angles 10:20:25 SkyScan query 10:20:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 10:20:25 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 10:20:25 Check angles 10:20:25 SkyScan query 10:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.5<-17300 Statuses=0008 0009 10:20:26 Msec=2250 True Az=112.995 Ze=-79.5 Az status=0008 Ze status=0009 10:20:26 Check angles 10:20:26 SkyScan query 10:20:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 10:20:27 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 10:20:27 Check angles 10:20:27 SkyScan query 10:20:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 10:20:27 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 10:20:28 Check angles 10:20:28 SkyScan query 10:20:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 10:20:28 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 10:20:28 Check angles 10:20:28 SkyScan query 10:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=4.275<-11715 Statuses=0008 0009 10:20:29 Msec=5250 True Az=112.995 Ze=4.275 Az status=0008 Ze status=0009 10:20:29 Check angles 10:20:29 SkyScan query 10:20:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:20:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:20:30 Message to Master queued w/err=0: serial=48137 error=0 10:20:35 Received message from Master: op=Filter serial=48138 10:20:35 Color wheel filter change from 0 to 0 10:20:35 FLIGetFilterPos err=0 currentPosition=0 10:20:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:35 Filter is already there-color wheel unchanged 10:20:35 Received message from Master: op=Shutter serial=48139 10:20:35 Shutter LASER close 10:20:35 Received message from Camera: op=State serial=48141 10:20:35 GetSingleValue result=40 Value=cccccccc 10:20:35 SkyScan query 10:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:36 Parameters OK 10:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:36 Set A/D data flow result=40 10:20:36 Set A/D channel type result=40 10:20:36 Set A/D encoding result=40 10:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:36 Set channel filter=0.000000e+000 result=40 10:20:36 Config A/D Result=40 10:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:36 Get A/D filter: -9.255963e+061 result=40 10:20:36 Get A/D value=-858993460 result=40 10:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:36 Parameters OK 10:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:36 Set A/D data flow result=40 10:20:36 Set A/D channel type result=40 10:20:36 Set A/D encoding result=40 10:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:36 Set channel filter=0.000000e+000 result=40 10:20:36 Config A/D Result=40 10:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:36 Get A/D filter: -9.255963e+061 result=40 10:20:36 Get A/D value=-858993460 result=40 10:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:36 Aux= 10:20:36 Message to Camera, serial 48141 queued 10:21:12 Received message from Master: op=PointingHead serial=48154 10:21:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:21:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:21:13 Point started: ret=0 10:21:13 point_skyscan result=0 10:21:14 Check angles 10:21:14 SkyScan query 10:21:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:21:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:21:14 Message to Master queued w/err=0: serial=48154 error=0 10:21:19 Received message from Master: op=Filter serial=48155 10:21:19 Color wheel filter change from 0 to 0 10:21:19 FLIGetFilterPos err=0 currentPosition=0 10:21:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:19 Filter is already there-color wheel unchanged 10:21:19 Received message from Master: op=Shutter serial=48156 10:21:19 Shutter LASER close 10:21:19 Received message from Camera: op=State serial=48158 10:21:19 GetSingleValue result=40 Value=cccccccc 10:21:19 SkyScan query 10:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:21:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:20 Parameters OK 10:21:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:20 Set A/D data flow result=40 10:21:20 Set A/D channel type result=40 10:21:20 Set A/D encoding result=40 10:21:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:20 Set channel filter=0.000000e+000 result=40 10:21:20 Config A/D Result=40 10:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:20 Get A/D filter: -9.255963e+061 result=40 10:21:20 Get A/D value=-858993460 result=40 10:21:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:20 Parameters OK 10:21:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:20 Set A/D data flow result=40 10:21:20 Set A/D channel type result=40 10:21:20 Set A/D encoding result=40 10:21:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:20 Set channel filter=0.000000e+000 result=40 10:21:20 Config A/D Result=40 10:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:20 Get A/D filter: -9.255963e+061 result=40 10:21:20 Get A/D value=-858993460 result=40 10:21:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:20 Aux= 10:21:20 Message to Camera, serial 48158 queued 10:21:57 Received message from Master: op=PointingHead serial=48171 10:21:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:21:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:21:57 Point started: ret=0 10:21:57 point_skyscan result=0 10:21:58 Check angles 10:21:58 SkyScan query 10:21:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:21:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:21:58 Message to Master queued w/err=0: serial=48171 error=0 10:22:03 Received message from Master: op=Filter serial=48172 10:22:03 Color wheel filter change from 0 to 0 10:22:03 FLIGetFilterPos err=0 currentPosition=0 10:22:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:03 Filter is already there-color wheel unchanged 10:22:04 Received message from Master: op=Shutter serial=48173 10:22:04 Shutter LASER close 10:22:04 Received message from Camera: op=State serial=48175 10:22:04 GetSingleValue result=40 Value=cccccccc 10:22:04 SkyScan query 10:22:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:22:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:04 Parameters OK 10:22:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:04 Set A/D data flow result=40 10:22:04 Set A/D channel type result=40 10:22:04 Set A/D encoding result=40 10:22:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:04 Set channel filter=0.000000e+000 result=40 10:22:04 Config A/D Result=40 10:22:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:04 Get A/D filter: -9.255963e+061 result=40 10:22:04 Get A/D value=-858993460 result=40 10:22:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:04 Parameters OK 10:22:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:04 Set A/D data flow result=40 10:22:04 Set A/D channel type result=40 10:22:04 Set A/D encoding result=40 10:22:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:04 Set channel filter=0.000000e+000 result=40 10:22:04 Config A/D Result=40 10:22:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:04 Get A/D filter: -9.255963e+061 result=40 10:22:04 Get A/D value=-858993460 result=40 10:22:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:04 Aux= 10:22:04 Message to Camera, serial 48175 queued 10:22:41 Received message from Master: op=PointingHead serial=48188 10:22:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:22:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:22:41 Point started: ret=0 10:22:41 point_skyscan result=0 10:22:42 Check angles 10:22:42 SkyScan query 10:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:22:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:22:43 Message to Master queued w/err=0: serial=48188 error=0 10:22:48 Received message from Master: op=Filter serial=48189 10:22:48 Color wheel filter change from 0 to 0 10:22:48 FLIGetFilterPos err=0 currentPosition=0 10:22:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:48 Filter is already there-color wheel unchanged 10:22:48 Received message from Master: op=Shutter serial=48190 10:22:48 Shutter LASER close 10:22:48 Received message from Camera: op=State serial=48192 10:22:48 GetSingleValue result=40 Value=cccccccc 10:22:48 SkyScan query 10:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:22:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:49 Parameters OK 10:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:49 Set A/D data flow result=40 10:22:49 Set A/D channel type result=40 10:22:49 Set A/D encoding result=40 10:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:49 Set channel filter=0.000000e+000 result=40 10:22:49 Config A/D Result=40 10:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:49 Get A/D filter: -9.255963e+061 result=40 10:22:49 Get A/D value=-858993460 result=40 10:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:49 Parameters OK 10:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:49 Set A/D data flow result=40 10:22:49 Set A/D channel type result=40 10:22:49 Set A/D encoding result=40 10:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:49 Set channel filter=0.000000e+000 result=40 10:22:49 Config A/D Result=40 10:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:49 Get A/D filter: -9.255963e+061 result=40 10:22:49 Get A/D value=-858993460 result=40 10:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:49 Aux= 10:22:49 Message to Camera, serial 48192 queued 10:23:25 Received message from Master: op=PointingHead serial=48205 10:23:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:23:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:23:26 Point started: ret=0 10:23:26 point_skyscan result=0 10:23:27 Check angles 10:23:27 SkyScan query 10:23:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 10:23:27 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 10:23:27 Check angles 10:23:27 SkyScan query 10:23:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 10:23:28 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 10:23:28 Check angles 10:23:28 SkyScan query 10:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.61<-16374 Statuses=0008 0009 10:23:29 Msec=1500 True Az=112.995 Ze=-65.61 Az status=0008 Ze status=0009 10:23:29 Check angles 10:23:29 SkyScan query 10:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.565<-17771 Statuses=0008 0009 10:23:29 Msec=2250 True Az=112.995 Ze=-86.565 Az status=0008 Ze status=0009 10:23:30 Check angles 10:23:30 SkyScan query 10:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 10:23:30 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 10:23:30 Check angles 10:23:30 SkyScan query 10:23:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 10:23:31 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 10:23:31 Check angles 10:23:31 SkyScan query 10:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.85<-21990 Statuses=0008 0009 10:23:32 Msec=4500 True Az=112.995 Ze=-149.85 Az status=0008 Ze status=0009 10:23:32 Check angles 10:23:32 SkyScan query 10:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.745<-23383 Statuses=0008 0009 10:23:32 Msec=5250 True Az=112.995 Ze=-170.745 Az status=0008 Ze status=0009 10:23:33 Check angles 10:23:33 SkyScan query 10:23:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:23:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:23:33 Message to Master queued w/err=0: serial=48205 error=0 10:23:38 Received message from Master: op=Filter serial=48206 10:23:38 Color wheel filter change from 0 to 0 10:23:38 FLIGetFilterPos err=0 currentPosition=0 10:23:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:38 Filter is already there-color wheel unchanged 10:23:38 Received message from Master: op=Shutter serial=48207 10:23:38 Shutter LASER open 10:23:38 Received message from Camera: op=State serial=48209 10:23:38 GetSingleValue result=40 Value=cccccccc 10:23:38 SkyScan query 10:23:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:23:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:39 Parameters OK 10:23:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:39 Set A/D data flow result=40 10:23:39 Set A/D channel type result=40 10:23:39 Set A/D encoding result=40 10:23:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:39 Set channel filter=0.000000e+000 result=40 10:23:39 Config A/D Result=40 10:23:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:39 Get A/D filter: -9.255963e+061 result=40 10:23:39 Get A/D value=-858993460 result=40 10:23:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:39 Parameters OK 10:23:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:39 Set A/D data flow result=40 10:23:39 Set A/D channel type result=40 10:23:39 Set A/D encoding result=40 10:23:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:39 Set channel filter=0.000000e+000 result=40 10:23:39 Config A/D Result=40 10:23:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:39 Get A/D filter: -9.255963e+061 result=40 10:23:39 Get A/D value=-858993460 result=40 10:23:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:39 Aux= 10:23:39 Message to Camera, serial 48209 queued 10:23:47 Received message from Master: op=Shutter serial=48219 10:23:48 Shutter LASER close 10:23:48 Received message from Master: op=PointingHead serial=48223 10:23:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:23:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:23:48 Point started: ret=0 10:23:48 point_skyscan result=0 10:23:49 Check angles 10:23:49 SkyScan query 10:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 10:23:50 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 [UTC 2019-3-1 10:23:50] 10:23:50 Check angles 10:23:50 SkyScan query 10:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 10:23:50 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 10:23:51 Check angles 10:23:51 SkyScan query 10:23:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 10:23:51 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 10:23:51 Check angles 10:23:51 SkyScan query 10:23:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 10:23:52 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 10:23:52 Check angles 10:23:52 SkyScan query 10:23:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 10:23:53 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 10:23:53 Check angles 10:23:53 SkyScan query 10:23:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 10:23:54 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 10:23:54 Check angles 10:23:54 SkyScan query 10:23:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.905<-13127 Statuses=0008 0009 10:23:54 Msec=4500 True Az=112.995 Ze=-16.905 Az status=0008 Ze status=0009 10:23:54 Check angles 10:23:54 SkyScan query 10:23:55 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 10:23:55 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 10:23:55 Check angles 10:23:55 SkyScan query 10:23:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:23:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:23:56 Message to Master queued w/err=0: serial=48223 error=0 10:24:01 Received message from Master: op=Filter serial=48224 10:24:01 Color wheel filter change from 0 to 0 10:24:01 FLIGetFilterPos err=0 currentPosition=0 10:24:01 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:01 Filter is already there-color wheel unchanged 10:24:01 Received message from Master: op=Shutter serial=48225 10:24:01 Shutter LASER close 10:24:01 Received message from Camera: op=State serial=48227 10:24:01 GetSingleValue result=40 Value=cccccccc 10:24:01 SkyScan query 10:24:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:24:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:02 Parameters OK 10:24:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:02 Set A/D data flow result=40 10:24:02 Set A/D channel type result=40 10:24:02 Set A/D encoding result=40 10:24:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:02 Set channel filter=0.000000e+000 result=40 10:24:02 Config A/D Result=40 10:24:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:02 Get A/D filter: -9.255963e+061 result=40 10:24:02 Get A/D value=-858993460 result=40 10:24:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:02 Parameters OK 10:24:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:02 Set A/D data flow result=40 10:24:02 Set A/D channel type result=40 10:24:02 Set A/D encoding result=40 10:24:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:02 Set channel filter=0.000000e+000 result=40 10:24:02 Config A/D Result=40 10:24:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:02 Get A/D filter: -9.255963e+061 result=40 10:24:02 Get A/D value=-858993460 result=40 10:24:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:02 Aux= 10:24:02 Message to Camera, serial 48227 queued 10:24:39 Received message from Master: op=PointingHead serial=48240 10:24:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:24:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:24:39 Point started: ret=0 10:24:39 point_skyscan result=0 10:24:40 Check angles 10:24:40 SkyScan query 10:24:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:24:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:24:40 Message to Master queued w/err=0: serial=48240 error=0 10:24:45 Received message from Master: op=Filter serial=48241 10:24:45 Color wheel filter change from 0 to 0 10:24:45 FLIGetFilterPos err=0 currentPosition=0 10:24:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:45 Filter is already there-color wheel unchanged 10:24:45 Received message from Master: op=Shutter serial=48242 10:24:45 Shutter LASER close 10:24:45 Received message from Camera: op=State serial=48244 10:24:45 GetSingleValue result=40 Value=cccccccc 10:24:45 SkyScan query 10:24:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:24:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:46 Parameters OK 10:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:46 Set A/D data flow result=40 10:24:46 Set A/D channel type result=40 10:24:46 Set A/D encoding result=40 10:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:46 Set channel filter=0.000000e+000 result=40 10:24:46 Config A/D Result=40 10:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:46 Get A/D filter: -9.255963e+061 result=40 10:24:46 Get A/D value=-858993460 result=40 10:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:46 Parameters OK 10:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:46 Set A/D data flow result=40 10:24:46 Set A/D channel type result=40 10:24:46 Set A/D encoding result=40 10:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:46 Set channel filter=0.000000e+000 result=40 10:24:46 Config A/D Result=40 10:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:46 Get A/D filter: -9.255963e+061 result=40 10:24:46 Get A/D value=-858993460 result=40 10:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:46 Aux= 10:24:46 Message to Camera, serial 48244 queued 10:25:23 Received message from Master: op=PointingHead serial=48257 10:25:23 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:25:23 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:25:23 Point started: ret=0 10:25:23 point_skyscan result=0 10:25:24 Check angles 10:25:24 SkyScan query 10:25:24 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 10:25:24 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 10:25:25 Check angles 10:25:25 SkyScan query 10:25:25 SkyScan query done: ret=0 az=153.54<-10236 ze=-6.495<-12433 Statuses=0009 0008 10:25:25 Msec=750 True Az=153.54 Ze=-6.495 Az status=0009 Ze status=0008 10:25:25 Check angles 10:25:25 SkyScan query 10:25:26 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 10:25:26 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 10:25:26 Check angles 10:25:26 SkyScan query 10:25:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:25:27 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:25:27 Message to Master queued w/err=0: serial=48257 error=0 10:25:32 Received message from Master: op=Filter serial=48258 10:25:32 Color wheel filter change from 0 to 0 10:25:32 FLIGetFilterPos err=0 currentPosition=0 10:25:32 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:32 Filter is already there-color wheel unchanged 10:25:32 Received message from Master: op=Shutter serial=48259 10:25:32 Shutter LASER close 10:25:32 Received message from Camera: op=State serial=48261 10:25:32 GetSingleValue result=40 Value=cccccccc 10:25:32 SkyScan query 10:25:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:25:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:33 Parameters OK 10:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:33 Set A/D data flow result=40 10:25:33 Set A/D channel type result=40 10:25:33 Set A/D encoding result=40 10:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:33 Set channel filter=0.000000e+000 result=40 10:25:33 Config A/D Result=40 10:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:33 Get A/D filter: -9.255963e+061 result=40 10:25:33 Get A/D value=-858993460 result=40 10:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:33 Parameters OK 10:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:33 Set A/D data flow result=40 10:25:33 Set A/D channel type result=40 10:25:33 Set A/D encoding result=40 10:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:33 Set channel filter=0.000000e+000 result=40 10:25:33 Config A/D Result=40 10:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:33 Get A/D filter: -9.255963e+061 result=40 10:25:33 Get A/D value=-858993460 result=40 10:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:33 Aux= 10:25:33 Message to Camera, serial 48261 queued 10:26:09 Received message from Master: op=PointingHead serial=48274 10:26:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:26:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:26:10 Point started: ret=0 10:26:10 point_skyscan result=0 10:26:11 Check angles 10:26:11 SkyScan query 10:26:11 SkyScan query done: ret=0 az=153.24<-10216 ze=6.51<-11566 Statuses=0009 0008 10:26:11 Msec=0 True Az=153.24 Ze=6.51 Az status=0009 Ze status=0008 10:26:11 Check angles 10:26:11 SkyScan query 10:26:12 SkyScan query done: ret=0 az=135.405<-9027 ze=6.495<-11567 Statuses=0009 0008 10:26:12 Msec=750 True Az=135.405 Ze=6.495 Az status=0009 Ze status=0008 10:26:12 Check angles 10:26:12 SkyScan query 10:26:13 SkyScan query done: ret=0 az=117.6<-7840 ze=6.495<-11567 Statuses=0009 0008 10:26:13 Msec=1500 True Az=117.6 Ze=6.495 Az status=0009 Ze status=0008 10:26:13 Check angles 10:26:13 SkyScan query 10:26:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:26:13 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:26:13 Message to Master queued w/err=0: serial=48274 error=0 10:26:18 Received message from Master: op=Filter serial=48275 10:26:18 Color wheel filter change from 0 to 0 10:26:18 FLIGetFilterPos err=0 currentPosition=0 10:26:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:18 Filter is already there-color wheel unchanged 10:26:19 Received message from Master: op=Shutter serial=48276 10:26:19 Shutter LASER close 10:26:19 Received message from Camera: op=State serial=48278 10:26:19 GetSingleValue result=40 Value=cccccccc 10:26:19 SkyScan query 10:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:26:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:19 Parameters OK 10:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:19 Set A/D data flow result=40 10:26:19 Set A/D channel type result=40 10:26:19 Set A/D encoding result=40 10:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:19 Set channel filter=0.000000e+000 result=40 10:26:19 Config A/D Result=40 10:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:19 Get A/D filter: -9.255963e+061 result=40 10:26:19 Get A/D value=-858993460 result=40 10:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:19 Parameters OK 10:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:19 Set A/D data flow result=40 10:26:19 Set A/D channel type result=40 10:26:19 Set A/D encoding result=40 10:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:19 Set channel filter=0.000000e+000 result=40 10:26:19 Config A/D Result=40 10:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:19 Get A/D filter: -9.255963e+061 result=40 10:26:19 Get A/D value=-858993460 result=40 10:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:19 Aux= 10:26:19 Message to Camera, serial 48278 queued 10:26:56 Received message from Master: op=PointingHead serial=48291 10:26:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:26:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:26:56 Point started: ret=0 10:26:56 point_skyscan result=0 10:26:57 Check angles 10:26:57 SkyScan query 10:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 10:26:58 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 10:26:58 Check angles 10:26:58 SkyScan query 10:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 10:26:58 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 10:26:59 Check angles 10:26:59 SkyScan query 10:26:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.07<-16338 Statuses=0008 0009 10:26:59 Msec=1500 True Az=112.995 Ze=-65.07 Az status=0008 Ze status=0009 10:26:59 Check angles 10:26:59 SkyScan query 10:27:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.025<-17735 Statuses=0008 0009 10:27:00 Msec=2250 True Az=112.995 Ze=-86.025 Az status=0008 Ze status=0009 10:27:00 Check angles 10:27:00 SkyScan query 10:27:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.95<-19130 Statuses=0008 0009 10:27:01 Msec=3000 True Az=112.995 Ze=-106.95 Az status=0008 Ze status=0009 10:27:01 Check angles 10:27:01 SkyScan query 10:27:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.935<-20529 Statuses=0008 0009 10:27:01 Msec=3750 True Az=112.995 Ze=-127.935 Az status=0008 Ze status=0009 10:27:02 Check angles 10:27:02 SkyScan query 10:27:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.875<-21925 Statuses=0008 0009 10:27:02 Msec=4500 True Az=112.995 Ze=-148.875 Az status=0008 Ze status=0009 10:27:02 Check angles 10:27:02 SkyScan query 10:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.25<-23350 Statuses=0008 0009 10:27:03 Msec=5250 True Az=112.995 Ze=-170.25 Az status=0008 Ze status=0009 10:27:03 Check angles 10:27:03 SkyScan query 10:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:27:04 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:27:04 Message to Master queued w/err=0: serial=48291 error=0 10:27:09 Received message from Master: op=Filter serial=48292 10:27:09 Color wheel filter change from 0 to 0 10:27:09 FLIGetFilterPos err=0 currentPosition=0 10:27:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:09 Filter is already there-color wheel unchanged 10:27:09 Received message from Master: op=Shutter serial=48293 10:27:09 Shutter LASER open 10:27:09 Received message from Camera: op=State serial=48295 10:27:09 GetSingleValue result=40 Value=cccccccc 10:27:09 SkyScan query 10:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:27:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:10 Parameters OK 10:27:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:10 Set A/D data flow result=40 10:27:10 Set A/D channel type result=40 10:27:10 Set A/D encoding result=40 10:27:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:10 Set channel filter=0.000000e+000 result=40 10:27:10 Config A/D Result=40 10:27:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:10 Get A/D filter: -9.255963e+061 result=40 10:27:10 Get A/D value=-858993460 result=40 10:27:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:10 Parameters OK 10:27:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:10 Set A/D data flow result=40 10:27:10 Set A/D channel type result=40 10:27:10 Set A/D encoding result=40 10:27:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:10 Set channel filter=0.000000e+000 result=40 10:27:10 Config A/D Result=40 10:27:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:10 Get A/D filter: -9.255963e+061 result=40 10:27:10 Get A/D value=-858993460 result=40 10:27:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:10 Aux= 10:27:10 Message to Camera, serial 48295 queued 10:27:18 Received message from Master: op=Shutter serial=48305 10:27:18 Shutter LASER close 10:27:19 Received message from Master: op=PointingHead serial=48309 10:27:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:27:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:27:19 Point started: ret=0 10:27:19 point_skyscan result=0 10:27:20 Check angles 10:27:20 SkyScan query 10:27:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 10:27:20 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 10:27:20 Check angles 10:27:20 SkyScan query 10:27:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 10:27:21 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 10:27:21 Check angles 10:27:21 SkyScan query 10:27:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.395<-18693 Statuses=0008 0009 10:27:22 Msec=1500 True Az=112.995 Ze=-100.395 Az status=0008 Ze status=0009 10:27:22 Check angles 10:27:22 SkyScan query 10:27:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 10:27:22 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 10:27:23 Check angles 10:27:23 SkyScan query 10:27:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.02<-15868 Statuses=0008 0009 10:27:23 Msec=3000 True Az=112.995 Ze=-58.02 Az status=0008 Ze status=0009 10:27:23 Check angles 10:27:23 SkyScan query 10:27:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.645<-14443 Statuses=0008 0009 10:27:24 Msec=3750 True Az=112.995 Ze=-36.645 Az status=0008 Ze status=0009 10:27:24 Check angles 10:27:24 SkyScan query 10:27:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.255<-13017 Statuses=0008 0009 10:27:25 Msec=4500 True Az=112.995 Ze=-15.255 Az status=0008 Ze status=0009 10:27:25 Check angles 10:27:25 SkyScan query 10:27:26 SkyScan query done: ret=0 az=112.995<-7533 ze=5.28<-11648 Statuses=0008 0009 10:27:26 Msec=5250 True Az=112.995 Ze=5.28 Az status=0008 Ze status=0009 10:27:26 Check angles 10:27:26 SkyScan query 10:27:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:27:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:27:26 Message to Master queued w/err=0: serial=48309 error=0 10:27:31 Received message from Master: op=Filter serial=48310 10:27:31 Color wheel filter change from 0 to 0 10:27:31 FLIGetFilterPos err=0 currentPosition=0 10:27:31 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:31 Filter is already there-color wheel unchanged 10:27:31 Received message from Master: op=Shutter serial=48311 10:27:31 Shutter LASER close 10:27:32 Received message from Camera: op=State serial=48313 10:27:32 GetSingleValue result=40 Value=cccccccc 10:27:32 SkyScan query 10:27:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:32 Parameters OK 10:27:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:32 Set A/D data flow result=40 10:27:32 Set A/D channel type result=40 10:27:32 Set A/D encoding result=40 10:27:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:32 Set channel filter=0.000000e+000 result=40 10:27:32 Config A/D Result=40 10:27:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:32 Get A/D filter: -9.255963e+061 result=40 10:27:32 Get A/D value=-858993460 result=40 10:27:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:32 Parameters OK 10:27:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:32 Set A/D data flow result=40 10:27:32 Set A/D channel type result=40 10:27:32 Set A/D encoding result=40 10:27:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:32 Set channel filter=0.000000e+000 result=40 10:27:32 Config A/D Result=40 10:27:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:32 Get A/D filter: -9.255963e+061 result=40 10:27:32 Get A/D value=-858993460 result=40 10:27:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:32 Aux= 10:27:32 Message to Camera, serial 48313 queued 10:28:09 Received message from Master: op=PointingHead serial=48326 10:28:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:28:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:28:09 Point started: ret=0 10:28:09 point_skyscan result=0 10:28:10 Check angles 10:28:10 SkyScan query 10:28:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:28:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:28:11 Message to Master queued w/err=0: serial=48326 error=0 10:28:16 Received message from Master: op=Filter serial=48327 10:28:16 Color wheel filter change from 0 to 0 10:28:16 FLIGetFilterPos err=0 currentPosition=0 10:28:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:16 Filter is already there-color wheel unchanged 10:28:16 Received message from Master: op=Shutter serial=48328 10:28:16 Shutter LASER close 10:28:16 Received message from Camera: op=State serial=48330 10:28:16 GetSingleValue result=40 Value=cccccccc 10:28:16 SkyScan query 10:28:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:28:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:17 Parameters OK 10:28:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:17 Set A/D data flow result=40 10:28:17 Set A/D channel type result=40 10:28:17 Set A/D encoding result=40 10:28:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:17 Set channel filter=0.000000e+000 result=40 10:28:17 Config A/D Result=40 10:28:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:17 Get A/D filter: -9.255963e+061 result=40 10:28:17 Get A/D value=-858993460 result=40 10:28:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:17 Parameters OK 10:28:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:17 Set A/D data flow result=40 10:28:17 Set A/D channel type result=40 10:28:17 Set A/D encoding result=40 10:28:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:17 Set channel filter=0.000000e+000 result=40 10:28:17 Config A/D Result=40 10:28:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:17 Get A/D filter: -9.255963e+061 result=40 10:28:17 Get A/D value=-858993460 result=40 10:28:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:17 Aux= 10:28:17 Message to Camera, serial 48330 queued 10:28:53 Received message from Master: op=PointingHead serial=48343 10:28:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:28:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:28:54 Point started: ret=0 10:28:54 point_skyscan result=0 10:28:54 Check angles 10:28:54 SkyScan query 10:28:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:28:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:28:55 Message to Master queued w/err=0: serial=48343 error=0 10:29:00 Received message from Master: op=Filter serial=48344 10:29:00 Color wheel filter change from 0 to 0 10:29:00 FLIGetFilterPos err=0 currentPosition=0 10:29:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:00 Filter is already there-color wheel unchanged 10:29:00 Received message from Master: op=Shutter serial=48345 10:29:00 Shutter LASER close 10:29:00 Received message from Camera: op=State serial=48347 10:29:00 GetSingleValue result=40 Value=cccccccc 10:29:00 SkyScan query 10:29:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:29:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:01 Parameters OK 10:29:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:01 Set A/D data flow result=40 10:29:01 Set A/D channel type result=40 10:29:01 Set A/D encoding result=40 10:29:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:01 Set channel filter=0.000000e+000 result=40 10:29:01 Config A/D Result=40 10:29:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:01 Get A/D filter: -9.255963e+061 result=40 10:29:01 Get A/D value=-858993460 result=40 10:29:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:01 Parameters OK 10:29:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:01 Set A/D data flow result=40 10:29:01 Set A/D channel type result=40 10:29:01 Set A/D encoding result=40 10:29:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:01 Set channel filter=0.000000e+000 result=40 10:29:01 Config A/D Result=40 10:29:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:01 Get A/D filter: -9.255963e+061 result=40 10:29:01 Get A/D value=-858993460 result=40 10:29:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:01 Aux= 10:29:01 Message to Camera, serial 48347 queued 10:29:38 Received message from Master: op=PointingHead serial=48360 10:29:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:29:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:29:38 Point started: ret=0 10:29:38 point_skyscan result=0 10:29:39 Check angles 10:29:39 SkyScan query 10:29:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:29:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:29:39 Message to Master queued w/err=0: serial=48360 error=0 10:29:44 Received message from Master: op=Filter serial=48361 10:29:44 Color wheel filter change from 0 to 0 10:29:44 FLIGetFilterPos err=0 currentPosition=0 10:29:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:44 Filter is already there-color wheel unchanged 10:29:44 Received message from Master: op=Shutter serial=48362 10:29:44 Shutter LASER close 10:29:45 Received message from Camera: op=State serial=48364 10:29:45 GetSingleValue result=40 Value=cccccccc 10:29:45 SkyScan query 10:29:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:29:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:45 Parameters OK 10:29:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:45 Set A/D data flow result=40 10:29:45 Set A/D channel type result=40 10:29:45 Set A/D encoding result=40 10:29:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:45 Set channel filter=0.000000e+000 result=40 10:29:45 Config A/D Result=40 10:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:45 Get A/D filter: -9.255963e+061 result=40 10:29:45 Get A/D value=-858993460 result=40 10:29:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:45 Parameters OK 10:29:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:45 Set A/D data flow result=40 10:29:45 Set A/D channel type result=40 10:29:45 Set A/D encoding result=40 10:29:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:45 Set channel filter=0.000000e+000 result=40 10:29:45 Config A/D Result=40 10:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:45 Get A/D filter: -9.255963e+061 result=40 10:29:45 Get A/D value=-858993460 result=40 10:29:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:45 Aux= 10:29:45 Message to Camera, serial 48364 queued 10:30:22 Received message from Master: op=PointingHead serial=48377 10:30:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:30:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:30:22 Point started: ret=0 10:30:22 point_skyscan result=0 10:30:23 Check angles 10:30:23 SkyScan query 10:30:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 10:30:24 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 10:30:24 Check angles 10:30:24 SkyScan query 10:30:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 10:30:24 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 10:30:25 Check angles 10:30:25 SkyScan query 10:30:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.79<-16386 Statuses=0008 0009 10:30:25 Msec=1500 True Az=112.995 Ze=-65.79 Az status=0008 Ze status=0009 10:30:25 Check angles 10:30:25 SkyScan query 10:30:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.18<-17812 Statuses=0008 0009 10:30:26 Msec=2250 True Az=112.995 Ze=-87.18 Az status=0008 Ze status=0009 10:30:26 Check angles 10:30:26 SkyScan query 10:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.555<-19237 Statuses=0008 0009 10:30:27 Msec=3000 True Az=112.995 Ze=-108.555 Az status=0008 Ze status=0009 10:30:27 Check angles 10:30:27 SkyScan query 10:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.525<-20635 Statuses=0008 0009 10:30:27 Msec=3750 True Az=112.995 Ze=-129.525 Az status=0008 Ze status=0009 10:30:28 Check angles 10:30:28 SkyScan query 10:30:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.885<-22059 Statuses=0008 0009 10:30:28 Msec=4500 True Az=112.995 Ze=-150.885 Az status=0008 Ze status=0009 10:30:28 Check angles 10:30:28 SkyScan query 10:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.825<-23455 Statuses=0008 0009 10:30:29 Msec=5250 True Az=112.995 Ze=-171.825 Az status=0008 Ze status=0009 10:30:29 Check angles 10:30:29 SkyScan query 10:30:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:30:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:30:30 Message to Master queued w/err=0: serial=48377 error=0 10:30:35 Received message from Master: op=Filter serial=48378 10:30:35 Color wheel filter change from 0 to 0 10:30:35 FLIGetFilterPos err=0 currentPosition=0 10:30:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:35 Filter is already there-color wheel unchanged 10:30:35 Received message from Master: op=Shutter serial=48379 10:30:35 Shutter LASER open 10:30:35 Received message from Camera: op=State serial=48381 10:30:35 GetSingleValue result=40 Value=cccccccc 10:30:35 SkyScan query 10:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:30:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:36 Parameters OK 10:30:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:36 Set A/D data flow result=40 10:30:36 Set A/D channel type result=40 10:30:36 Set A/D encoding result=40 10:30:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:36 Set channel filter=0.000000e+000 result=40 10:30:36 Config A/D Result=40 10:30:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:36 Get A/D filter: -9.255963e+061 result=40 10:30:36 Get A/D value=-858993460 result=40 10:30:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:36 Parameters OK 10:30:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:36 Set A/D data flow result=40 10:30:36 Set A/D channel type result=40 10:30:36 Set A/D encoding result=40 10:30:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:36 Set channel filter=0.000000e+000 result=40 10:30:36 Config A/D Result=40 10:30:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:36 Get A/D filter: -9.255963e+061 result=40 10:30:36 Get A/D value=-858993460 result=40 10:30:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:36 Aux= 10:30:36 Message to Camera, serial 48381 queued 10:30:44 Received message from Master: op=Shutter serial=48391 10:30:44 Shutter LASER close 10:30:45 Received message from Master: op=PointingHead serial=48395 10:30:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:30:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:30:45 Point started: ret=0 10:30:45 point_skyscan result=0 10:30:46 Check angles 10:30:46 SkyScan query 10:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 10:30:46 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 10:30:46 Check angles 10:30:46 SkyScan query 10:30:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 10:30:47 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 10:30:47 Check angles 10:30:47 SkyScan query 10:30:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.385<-18759 Statuses=0008 0009 10:30:48 Msec=1500 True Az=112.995 Ze=-101.385 Az status=0008 Ze status=0009 10:30:48 Check angles 10:30:48 SkyScan query 10:30:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.415<-17361 Statuses=0008 0009 10:30:49 Msec=2250 True Az=112.995 Ze=-80.415 Az status=0008 Ze status=0009 10:30:49 Check angles 10:30:49 SkyScan query 10:30:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.475<-15965 Statuses=0008 0009 10:30:49 Msec=3000 True Az=112.995 Ze=-59.475 Az status=0008 Ze status=0009 10:30:49 Check angles 10:30:49 SkyScan query 10:30:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.505<-14567 Statuses=0008 0009 10:30:50 Msec=3750 True Az=112.995 Ze=-38.505 Az status=0008 Ze status=0009 10:30:50 Check angles 10:30:50 SkyScan query 10:30:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.55<-13170 Statuses=0008 0009 10:30:51 Msec=4500 True Az=112.995 Ze=-17.55 Az status=0008 Ze status=0009 10:30:51 Check angles 10:30:51 SkyScan query 10:30:52 SkyScan query done: ret=0 az=112.995<-7533 ze=3.405<-11773 Statuses=0008 0009 10:30:52 Msec=5250 True Az=112.995 Ze=3.405 Az status=0008 Ze status=0009 10:30:52 Check angles 10:30:52 SkyScan query 10:30:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:30:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:30:52 Message to Master queued w/err=0: serial=48395 error=0 10:30:57 Received message from Master: op=Filter serial=48396 10:30:57 Color wheel filter change from 0 to 0 10:30:57 FLIGetFilterPos err=0 currentPosition=0 10:30:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:57 Filter is already there-color wheel unchanged 10:30:57 Received message from Master: op=Shutter serial=48397 10:30:57 Shutter LASER close 10:30:58 Received message from Camera: op=State serial=48399 10:30:58 GetSingleValue result=40 Value=cccccccc 10:30:58 SkyScan query 10:30:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:30:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:58 Parameters OK 10:30:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:58 Set A/D data flow result=40 10:30:58 Set A/D channel type result=40 10:30:58 Set A/D encoding result=40 10:30:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:58 Set channel filter=0.000000e+000 result=40 10:30:58 Config A/D Result=40 10:30:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:58 Get A/D filter: -9.255963e+061 result=40 10:30:58 Get A/D value=-858993460 result=40 10:30:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:58 Parameters OK 10:30:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:58 Set A/D data flow result=40 10:30:58 Set A/D channel type result=40 10:30:58 Set A/D encoding result=40 10:30:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:58 Set channel filter=0.000000e+000 result=40 10:30:58 Config A/D Result=40 10:30:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:58 Get A/D filter: -9.255963e+061 result=40 10:30:58 Get A/D value=-858993460 result=40 10:30:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:58 Aux= 10:30:58 Message to Camera, serial 48399 queued 10:31:34 Received message from Master: op=PointingHead serial=48411 10:31:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:31:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:31:34 Point started: ret=0 10:31:34 point_skyscan result=0 10:31:35 Check angles 10:31:35 SkyScan query 10:31:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:31:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:31:36 Message to Master queued w/err=0: serial=48411 error=0 10:31:41 Received message from Master: op=Filter serial=48412 10:31:41 Color wheel filter change from 0 to 0 10:31:41 FLIGetFilterPos err=0 currentPosition=0 10:31:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:31:41 Filter is already there-color wheel unchanged 10:31:41 Received message from Master: op=Shutter serial=48413 10:31:41 Shutter LASER close 10:31:41 Received message from Camera: op=State serial=48415 10:31:41 GetSingleValue result=40 Value=cccccccc 10:31:41 SkyScan query 10:31:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:31:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:42 Parameters OK 10:31:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:42 Set A/D data flow result=40 10:31:42 Set A/D channel type result=40 10:31:42 Set A/D encoding result=40 10:31:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:42 Set channel filter=0.000000e+000 result=40 10:31:42 Config A/D Result=40 10:31:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:42 Get A/D filter: -9.255963e+061 result=40 10:31:42 Get A/D value=-858993460 result=40 10:31:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:42 Parameters OK 10:31:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:42 Set A/D data flow result=40 10:31:42 Set A/D channel type result=40 10:31:42 Set A/D encoding result=40 10:31:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:42 Set channel filter=0.000000e+000 result=40 10:31:42 Config A/D Result=40 10:31:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:42 Get A/D filter: -9.255963e+061 result=40 10:31:42 Get A/D value=-858993460 result=40 10:31:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:31:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:31:42 Aux= 10:31:42 Message to Camera, serial 48415 queued 10:32:18 Received message from Master: op=PointingHead serial=48428 10:32:18 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:32:18 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:32:19 Point started: ret=0 10:32:19 point_skyscan result=0 10:32:20 Check angles 10:32:20 SkyScan query 10:32:20 SkyScan query done: ret=0 az=135.945<-9063 ze=-6.51<-12434 Statuses=0009 0008 10:32:20 Msec=0 True Az=135.945 Ze=-6.51 Az status=0009 Ze status=0008 10:32:20 Check angles 10:32:20 SkyScan query 10:32:21 SkyScan query done: ret=0 az=153.435<-10229 ze=-6.495<-12433 Statuses=0009 0008 10:32:21 Msec=750 True Az=153.435 Ze=-6.495 Az status=0009 Ze status=0008 10:32:21 Check angles 10:32:21 SkyScan query 10:32:22 SkyScan query done: ret=0 az=171.27<-11418 ze=-6.495<-12433 Statuses=0009 0008 10:32:22 Msec=1500 True Az=171.27 Ze=-6.495 Az status=0009 Ze status=0008 10:32:22 Check angles 10:32:22 SkyScan query 10:32:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:32:22 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:32:22 Message to Master queued w/err=0: serial=48428 error=0 10:32:27 Received message from Master: op=Filter serial=48429 10:32:27 Color wheel filter change from 0 to 0 10:32:27 FLIGetFilterPos err=0 currentPosition=0 10:32:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:27 Filter is already there-color wheel unchanged 10:32:28 Received message from Master: op=Shutter serial=48430 10:32:28 Shutter LASER close 10:32:28 Received message from Camera: op=State serial=48432 10:32:28 GetSingleValue result=40 Value=cccccccc 10:32:28 SkyScan query 10:32:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:32:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:28 Parameters OK 10:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:28 Set A/D data flow result=40 10:32:28 Set A/D channel type result=40 10:32:28 Set A/D encoding result=40 10:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:28 Set channel filter=0.000000e+000 result=40 10:32:28 Config A/D Result=40 10:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:28 Get A/D filter: -9.255963e+061 result=40 10:32:28 Get A/D value=-858993460 result=40 10:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:28 Parameters OK 10:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:28 Set A/D data flow result=40 10:32:28 Set A/D channel type result=40 10:32:28 Set A/D encoding result=40 10:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:28 Set channel filter=0.000000e+000 result=40 10:32:28 Config A/D Result=40 10:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:28 Get A/D filter: -9.255963e+061 result=40 10:32:28 Get A/D value=-858993460 result=40 10:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:28 Aux= 10:32:28 Message to Camera, serial 48432 queued 10:33:05 Received message from Master: op=PointingHead serial=48445 10:33:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:33:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:33:05 Point started: ret=0 10:33:05 point_skyscan result=0 10:33:06 Check angles 10:33:06 SkyScan query 10:33:07 SkyScan query done: ret=0 az=152.4<-10160 ze=6.51<-11566 Statuses=0009 0008 10:33:07 Msec=0 True Az=152.4 Ze=6.51 Az status=0009 Ze status=0008 10:33:07 Check angles 10:33:07 SkyScan query 10:33:07 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 10:33:07 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 10:33:08 Check angles 10:33:08 SkyScan query 10:33:08 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 10:33:08 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 10:33:08 Check angles 10:33:08 SkyScan query 10:33:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:33:09 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:33:09 Message to Master queued w/err=0: serial=48445 error=0 10:33:14 Received message from Master: op=Filter serial=48446 10:33:14 Color wheel filter change from 0 to 0 10:33:14 FLIGetFilterPos err=0 currentPosition=0 10:33:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:14 Filter is already there-color wheel unchanged 10:33:14 Received message from Master: op=Shutter serial=48447 10:33:14 Shutter LASER close 10:33:14 Received message from Camera: op=State serial=48449 10:33:14 GetSingleValue result=40 Value=cccccccc 10:33:14 SkyScan query 10:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:33:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:15 Parameters OK 10:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:15 Set A/D data flow result=40 10:33:15 Set A/D channel type result=40 10:33:15 Set A/D encoding result=40 10:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:15 Set channel filter=0.000000e+000 result=40 10:33:15 Config A/D Result=40 10:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:15 Get A/D filter: -9.255963e+061 result=40 10:33:15 Get A/D value=-858993460 result=40 10:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:15 Parameters OK 10:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:15 Set A/D data flow result=40 10:33:15 Set A/D channel type result=40 10:33:15 Set A/D encoding result=40 10:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:15 Set channel filter=0.000000e+000 result=40 10:33:15 Config A/D Result=40 10:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:15 Get A/D filter: -9.255963e+061 result=40 10:33:15 Get A/D value=-858993460 result=40 10:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:15 Aux= 10:33:15 Message to Camera, serial 48449 queued 10:33:38 Received message from Master: op=Identify serial=48450 10:33:52 Received message from Master: op=PointingHead serial=48465 10:33:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:33:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:33:52 Point started: ret=0 10:33:52 point_skyscan result=0 10:33:53 Check angles 10:33:53 SkyScan query 10:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 10:33:53 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 10:33:54 Check angles 10:33:54 SkyScan query 10:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 10:33:54 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 10:33:54 Check angles 10:33:54 SkyScan query 10:33:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 10:33:55 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 10:33:55 Check angles 10:33:55 SkyScan query 10:33:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 10:33:56 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 10:33:56 Check angles 10:33:56 SkyScan query 10:33:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.49<-19166 Statuses=0008 0009 10:33:56 Msec=3000 True Az=112.995 Ze=-107.49 Az status=0008 Ze status=0009 10:33:57 Check angles 10:33:57 SkyScan query 10:33:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.43<-20562 Statuses=0008 0009 10:33:57 Msec=3750 True Az=112.995 Ze=-128.43 Az status=0008 Ze status=0009 10:33:57 Check angles 10:33:57 SkyScan query 10:33:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.4<-21960 Statuses=0008 0009 10:33:58 Msec=4500 True Az=112.995 Ze=-149.4 Az status=0008 Ze status=0009 10:33:58 Check angles 10:33:58 SkyScan query 10:33:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.715<-23381 Statuses=0008 0009 10:33:59 Msec=5250 True Az=112.995 Ze=-170.715 Az status=0008 Ze status=0009 10:33:59 Check angles 10:33:59 SkyScan query 10:33:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:33:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:33:59 Message to Master queued w/err=0: serial=48465 error=0 10:34:04 Received message from Master: op=Filter serial=48466 10:34:04 Color wheel filter change from 0 to 0 10:34:04 FLIGetFilterPos err=0 currentPosition=0 10:34:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:04 Filter is already there-color wheel unchanged 10:34:05 Received message from Master: op=Shutter serial=48467 10:34:05 Shutter LASER open 10:34:05 Received message from Camera: op=State serial=48469 10:34:05 GetSingleValue result=40 Value=cccccccc 10:34:05 SkyScan query 10:34:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:34:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:05 Parameters OK 10:34:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:05 Set A/D data flow result=40 10:34:05 Set A/D channel type result=40 10:34:05 Set A/D encoding result=40 10:34:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:05 Set channel filter=0.000000e+000 result=40 10:34:05 Config A/D Result=40 10:34:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:05 Get A/D filter: -9.255963e+061 result=40 10:34:05 Get A/D value=-858993460 result=40 10:34:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:05 Parameters OK 10:34:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:05 Set A/D data flow result=40 10:34:05 Set A/D channel type result=40 10:34:05 Set A/D encoding result=40 10:34:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:05 Set channel filter=0.000000e+000 result=40 10:34:05 Config A/D Result=40 10:34:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:05 Get A/D filter: -9.255963e+061 result=40 10:34:05 Get A/D value=-858993460 result=40 10:34:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 [UTC 2019-3-1 10:34:05] 10:34:05 Aux= 10:34:05 Message to Camera, serial 48469 queued 10:34:14 Received message from Master: op=Shutter serial=48479 10:34:14 Shutter LASER close 10:34:14 Received message from Master: op=PointingHead serial=48483 10:34:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:34:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:34:14 Point started: ret=0 10:34:14 point_skyscan result=0 10:34:15 Check angles 10:34:15 SkyScan query 10:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 10:34:16 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 10:34:16 Check angles 10:34:16 SkyScan query 10:34:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 10:34:17 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 10:34:17 Check angles 10:34:17 SkyScan query 10:34:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 10:34:17 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 10:34:17 Check angles 10:34:17 SkyScan query 10:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.535<-17369 Statuses=0008 0009 10:34:18 Msec=2250 True Az=112.995 Ze=-80.535 Az status=0008 Ze status=0009 10:34:18 Check angles 10:34:18 SkyScan query 10:34:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.595<-15973 Statuses=0008 0009 10:34:19 Msec=3000 True Az=112.995 Ze=-59.595 Az status=0008 Ze status=0009 10:34:19 Check angles 10:34:19 SkyScan query 10:34:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.64<-14576 Statuses=0008 0009 10:34:20 Msec=3750 True Az=112.995 Ze=-38.64 Az status=0008 Ze status=0009 10:34:20 Check angles 10:34:20 SkyScan query 10:34:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.67<-13178 Statuses=0008 0009 10:34:20 Msec=4500 True Az=112.995 Ze=-17.67 Az status=0008 Ze status=0009 10:34:20 Check angles 10:34:20 SkyScan query 10:34:21 SkyScan query done: ret=0 az=112.995<-7533 ze=3.285<-11781 Statuses=0008 0009 10:34:21 Msec=5250 True Az=112.995 Ze=3.285 Az status=0008 Ze status=0009 10:34:21 Check angles 10:34:21 SkyScan query 10:34:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:34:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:34:22 Message to Master queued w/err=0: serial=48483 error=0 10:34:27 Received message from Master: op=Filter serial=48484 10:34:27 Color wheel filter change from 0 to 0 10:34:27 FLIGetFilterPos err=0 currentPosition=0 10:34:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:27 Filter is already there-color wheel unchanged 10:34:27 Received message from Master: op=Shutter serial=48485 10:34:27 Shutter LASER close 10:34:27 Received message from Camera: op=State serial=48487 10:34:27 GetSingleValue result=40 Value=cccccccc 10:34:27 SkyScan query 10:34:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:28 Parameters OK 10:34:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:28 Set A/D data flow result=40 10:34:28 Set A/D channel type result=40 10:34:28 Set A/D encoding result=40 10:34:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:28 Set channel filter=0.000000e+000 result=40 10:34:28 Config A/D Result=40 10:34:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:28 Get A/D filter: -9.255963e+061 result=40 10:34:28 Get A/D value=-858993460 result=40 10:34:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:28 Parameters OK 10:34:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:28 Set A/D data flow result=40 10:34:28 Set A/D channel type result=40 10:34:28 Set A/D encoding result=40 10:34:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:28 Set channel filter=0.000000e+000 result=40 10:34:28 Config A/D Result=40 10:34:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:28 Get A/D filter: -9.255963e+061 result=40 10:34:28 Get A/D value=-858993460 result=40 10:34:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:28 Aux= 10:34:28 Message to Camera, serial 48487 queued 10:35:05 Received message from Master: op=PointingHead serial=48500 10:35:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:35:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:35:05 Point started: ret=0 10:35:05 point_skyscan result=0 10:35:06 Check angles 10:35:06 SkyScan query 10:35:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:35:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:35:06 Message to Master queued w/err=0: serial=48500 error=0 10:35:11 Received message from Master: op=Filter serial=48501 10:35:11 Color wheel filter change from 0 to 0 10:35:11 FLIGetFilterPos err=0 currentPosition=0 10:35:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:11 Filter is already there-color wheel unchanged 10:35:11 Received message from Master: op=Shutter serial=48502 10:35:11 Shutter LASER close 10:35:11 Received message from Camera: op=State serial=48504 10:35:11 GetSingleValue result=40 Value=cccccccc 10:35:11 SkyScan query 10:35:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:35:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:12 Parameters OK 10:35:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:12 Set A/D data flow result=40 10:35:12 Set A/D channel type result=40 10:35:12 Set A/D encoding result=40 10:35:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:12 Set channel filter=0.000000e+000 result=40 10:35:12 Config A/D Result=40 10:35:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:12 Get A/D filter: -9.255963e+061 result=40 10:35:12 Get A/D value=-858993460 result=40 10:35:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:12 Parameters OK 10:35:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:12 Set A/D data flow result=40 10:35:12 Set A/D channel type result=40 10:35:12 Set A/D encoding result=40 10:35:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:12 Set channel filter=0.000000e+000 result=40 10:35:12 Config A/D Result=40 10:35:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:12 Get A/D filter: -9.255963e+061 result=40 10:35:12 Get A/D value=-858993460 result=40 10:35:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:12 Aux= 10:35:12 Message to Camera, serial 48504 queued 10:35:49 Received message from Master: op=PointingHead serial=48517 10:35:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:35:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:35:49 Point started: ret=0 10:35:49 point_skyscan result=0 10:35:50 Check angles 10:35:50 SkyScan query 10:35:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:35:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:35:51 Message to Master queued w/err=0: serial=48517 error=0 10:35:56 Received message from Master: op=Filter serial=48518 10:35:56 Color wheel filter change from 0 to 0 10:35:56 FLIGetFilterPos err=0 currentPosition=0 10:35:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:56 Filter is already there-color wheel unchanged 10:35:56 Received message from Master: op=Shutter serial=48519 10:35:56 Shutter LASER close 10:35:56 Received message from Camera: op=State serial=48521 10:35:56 GetSingleValue result=40 Value=cccccccc 10:35:56 SkyScan query 10:35:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:35:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:56 Parameters OK 10:35:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:56 Set A/D data flow result=40 10:35:56 Set A/D channel type result=40 10:35:56 Set A/D encoding result=40 10:35:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:56 Set channel filter=0.000000e+000 result=40 10:35:56 Config A/D Result=40 10:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:56 Get A/D filter: -9.255963e+061 result=40 10:35:56 Get A/D value=-858993460 result=40 10:35:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:56 Parameters OK 10:35:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:56 Set A/D data flow result=40 10:35:56 Set A/D channel type result=40 10:35:56 Set A/D encoding result=40 10:35:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:56 Set channel filter=0.000000e+000 result=40 10:35:56 Config A/D Result=40 10:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:56 Get A/D filter: -9.255963e+061 result=40 10:35:56 Get A/D value=-858993460 result=40 10:35:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:56 Aux= 10:35:56 Message to Camera, serial 48521 queued 10:36:33 Received message from Master: op=PointingHead serial=48534 10:36:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:36:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:36:34 Point started: ret=0 10:36:34 point_skyscan result=0 10:36:34 Check angles 10:36:34 SkyScan query 10:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:36:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:36:35 Message to Master queued w/err=0: serial=48534 error=0 10:36:40 Received message from Master: op=Filter serial=48535 10:36:40 Color wheel filter change from 0 to 0 10:36:40 FLIGetFilterPos err=0 currentPosition=0 10:36:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:40 Filter is already there-color wheel unchanged 10:36:40 Received message from Master: op=Shutter serial=48536 10:36:40 Shutter LASER close 10:36:40 Received message from Camera: op=State serial=48538 10:36:40 GetSingleValue result=40 Value=cccccccc 10:36:40 SkyScan query 10:36:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:36:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:41 Parameters OK 10:36:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:41 Set A/D data flow result=40 10:36:41 Set A/D channel type result=40 10:36:41 Set A/D encoding result=40 10:36:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:41 Set channel filter=0.000000e+000 result=40 10:36:41 Config A/D Result=40 10:36:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:41 Get A/D filter: -9.255963e+061 result=40 10:36:41 Get A/D value=-858993460 result=40 10:36:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:41 Parameters OK 10:36:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:41 Set A/D data flow result=40 10:36:41 Set A/D channel type result=40 10:36:41 Set A/D encoding result=40 10:36:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:41 Set channel filter=0.000000e+000 result=40 10:36:41 Config A/D Result=40 10:36:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:41 Get A/D filter: -9.255963e+061 result=40 10:36:41 Get A/D value=-858993460 result=40 10:36:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:41 Aux= 10:36:41 Message to Camera, serial 48538 queued 10:37:18 Received message from Master: op=PointingHead serial=48551 10:37:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:37:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:37:18 Point started: ret=0 10:37:18 point_skyscan result=0 10:37:19 Check angles 10:37:19 SkyScan query 10:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 10:37:19 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 10:37:19 Check angles 10:37:19 SkyScan query 10:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 10:37:20 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 10:37:20 Check angles 10:37:20 SkyScan query 10:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 10:37:21 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 10:37:21 Check angles 10:37:21 SkyScan query 10:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.92<-17728 Statuses=0008 0009 10:37:21 Msec=2250 True Az=112.995 Ze=-85.92 Az status=0008 Ze status=0009 10:37:22 Check angles 10:37:22 SkyScan query 10:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.845<-19123 Statuses=0008 0009 10:37:22 Msec=3000 True Az=112.995 Ze=-106.845 Az status=0008 Ze status=0009 10:37:22 Check angles 10:37:22 SkyScan query 10:37:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.815<-20521 Statuses=0008 0009 10:37:23 Msec=3750 True Az=112.995 Ze=-127.815 Az status=0008 Ze status=0009 10:37:23 Check angles 10:37:23 SkyScan query 10:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.755<-21917 Statuses=0008 0009 10:37:24 Msec=4500 True Az=112.995 Ze=-148.755 Az status=0008 Ze status=0009 10:37:24 Check angles 10:37:24 SkyScan query 10:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.725<-23315 Statuses=0008 0009 10:37:24 Msec=5250 True Az=112.995 Ze=-169.725 Az status=0008 Ze status=0009 10:37:25 Check angles 10:37:25 SkyScan query 10:37:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:37:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:37:25 Message to Master queued w/err=0: serial=48551 error=0 10:37:30 Received message from Master: op=Filter serial=48552 10:37:30 Color wheel filter change from 0 to 0 10:37:30 FLIGetFilterPos err=0 currentPosition=0 10:37:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:30 Filter is already there-color wheel unchanged 10:37:30 Received message from Master: op=Shutter serial=48553 10:37:30 Shutter LASER open 10:37:31 Received message from Camera: op=State serial=48555 10:37:31 GetSingleValue result=40 Value=cccccccc 10:37:31 SkyScan query 10:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:37:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:31 Parameters OK 10:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:31 Set A/D data flow result=40 10:37:31 Set A/D channel type result=40 10:37:31 Set A/D encoding result=40 10:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:31 Set channel filter=0.000000e+000 result=40 10:37:31 Config A/D Result=40 10:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:31 Get A/D filter: -9.255963e+061 result=40 10:37:31 Get A/D value=-858993460 result=40 10:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:31 Parameters OK 10:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:31 Set A/D data flow result=40 10:37:31 Set A/D channel type result=40 10:37:31 Set A/D encoding result=40 10:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:31 Set channel filter=0.000000e+000 result=40 10:37:31 Config A/D Result=40 10:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:31 Get A/D filter: -9.255963e+061 result=40 10:37:31 Get A/D value=-858993460 result=40 10:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:31 Aux= 10:37:31 Message to Camera, serial 48555 queued 10:37:40 Received message from Master: op=Shutter serial=48565 10:37:40 Shutter LASER close 10:37:40 Received message from Master: op=PointingHead serial=48569 10:37:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:37:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:37:40 Point started: ret=0 10:37:40 point_skyscan result=0 10:37:41 Check angles 10:37:41 SkyScan query 10:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 10:37:42 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 10:37:42 Check angles 10:37:42 SkyScan query 10:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 10:37:43 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 10:37:43 Check angles 10:37:43 SkyScan query 10:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.37<-18758 Statuses=0008 0009 10:37:43 Msec=1500 True Az=112.995 Ze=-101.37 Az status=0008 Ze status=0009 10:37:43 Check angles 10:37:43 SkyScan query 10:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.43<-17362 Statuses=0008 0009 10:37:44 Msec=2250 True Az=112.995 Ze=-80.43 Az status=0008 Ze status=0009 10:37:44 Check angles 10:37:44 SkyScan query 10:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.475<-15965 Statuses=0008 0009 10:37:45 Msec=3000 True Az=112.995 Ze=-59.475 Az status=0008 Ze status=0009 10:37:45 Check angles 10:37:45 SkyScan query 10:37:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.505<-14567 Statuses=0008 0009 10:37:46 Msec=3750 True Az=112.995 Ze=-38.505 Az status=0008 Ze status=0009 10:37:46 Check angles 10:37:46 SkyScan query 10:37:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.565<-13171 Statuses=0008 0009 10:37:46 Msec=4500 True Az=112.995 Ze=-17.565 Az status=0008 Ze status=0009 10:37:46 Check angles 10:37:46 SkyScan query 10:37:47 SkyScan query done: ret=0 az=112.995<-7533 ze=3.405<-11773 Statuses=0008 0009 10:37:47 Msec=5250 True Az=112.995 Ze=3.405 Az status=0008 Ze status=0009 10:37:47 Check angles 10:37:47 SkyScan query 10:37:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:37:48 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:37:48 Message to Master queued w/err=0: serial=48569 error=0 10:37:53 Received message from Master: op=Filter serial=48570 10:37:53 Color wheel filter change from 0 to 0 10:37:53 FLIGetFilterPos err=0 currentPosition=0 10:37:53 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:53 Filter is already there-color wheel unchanged 10:37:53 Received message from Master: op=Shutter serial=48571 10:37:53 Shutter LASER close 10:37:53 Received message from Camera: op=State serial=48573 10:37:53 GetSingleValue result=40 Value=cccccccc 10:37:53 SkyScan query 10:37:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:37:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:54 Parameters OK 10:37:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:54 Set A/D data flow result=40 10:37:54 Set A/D channel type result=40 10:37:54 Set A/D encoding result=40 10:37:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:54 Set channel filter=0.000000e+000 result=40 10:37:54 Config A/D Result=40 10:37:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:54 Get A/D filter: -9.255963e+061 result=40 10:37:54 Get A/D value=-858993460 result=40 10:37:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:54 Parameters OK 10:37:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:54 Set A/D data flow result=40 10:37:54 Set A/D channel type result=40 10:37:54 Set A/D encoding result=40 10:37:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:54 Set channel filter=0.000000e+000 result=40 10:37:54 Config A/D Result=40 10:37:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:54 Get A/D filter: -9.255963e+061 result=40 10:37:54 Get A/D value=-858993460 result=40 10:37:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:54 Aux= 10:37:54 Message to Camera, serial 48573 queued 10:38:31 Received message from Master: op=PointingHead serial=48586 10:38:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:38:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:38:31 Point started: ret=0 10:38:31 point_skyscan result=0 10:38:32 Check angles 10:38:32 SkyScan query 10:38:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:38:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:38:32 Message to Master queued w/err=0: serial=48586 error=0 10:38:37 Received message from Master: op=Filter serial=48587 10:38:37 Color wheel filter change from 0 to 0 10:38:37 FLIGetFilterPos err=0 currentPosition=0 10:38:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:38:37 Filter is already there-color wheel unchanged 10:38:37 Received message from Master: op=Shutter serial=48588 10:38:37 Shutter LASER close 10:38:37 Received message from Camera: op=State serial=48590 10:38:37 GetSingleValue result=40 Value=cccccccc 10:38:37 SkyScan query 10:38:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:38:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:38 Parameters OK 10:38:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:38 Set A/D data flow result=40 10:38:38 Set A/D channel type result=40 10:38:38 Set A/D encoding result=40 10:38:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:38 Set channel filter=0.000000e+000 result=40 10:38:38 Config A/D Result=40 10:38:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:38 Get A/D filter: -9.255963e+061 result=40 10:38:38 Get A/D value=-858993460 result=40 10:38:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:38 Parameters OK 10:38:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:38 Set A/D data flow result=40 10:38:38 Set A/D channel type result=40 10:38:38 Set A/D encoding result=40 10:38:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:38 Set channel filter=0.000000e+000 result=40 10:38:38 Config A/D Result=40 10:38:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:38 Get A/D filter: -9.255963e+061 result=40 10:38:38 Get A/D value=-858993460 result=40 10:38:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:38:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:38:38 Aux= 10:38:38 Message to Camera, serial 48590 queued 10:39:15 Received message from Master: op=PointingHead serial=48603 10:39:15 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:39:15 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:39:15 Point started: ret=0 10:39:15 point_skyscan result=0 10:39:16 Check angles 10:39:16 SkyScan query 10:39:16 SkyScan query done: ret=0 az=135.945<-9063 ze=-6.51<-12434 Statuses=0009 0008 10:39:16 Msec=0 True Az=135.945 Ze=-6.51 Az status=0009 Ze status=0008 10:39:17 Check angles 10:39:17 SkyScan query 10:39:17 SkyScan query done: ret=0 az=153.84<-10256 ze=-6.495<-12433 Statuses=0009 0008 10:39:17 Msec=750 True Az=153.84 Ze=-6.495 Az status=0009 Ze status=0008 10:39:17 Check angles 10:39:17 SkyScan query 10:39:18 SkyScan query done: ret=0 az=171.3<-11420 ze=-6.495<-12433 Statuses=0009 0008 10:39:18 Msec=1500 True Az=171.3 Ze=-6.495 Az status=0009 Ze status=0008 10:39:18 Check angles 10:39:18 SkyScan query 10:39:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:39:19 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:39:19 Message to Master queued w/err=0: serial=48603 error=0 10:39:24 Received message from Master: op=Filter serial=48604 10:39:24 Color wheel filter change from 0 to 0 10:39:24 FLIGetFilterPos err=0 currentPosition=0 10:39:24 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:24 Filter is already there-color wheel unchanged 10:39:24 Received message from Master: op=Shutter serial=48605 10:39:24 Shutter LASER close 10:39:24 Received message from Camera: op=State serial=48607 10:39:24 GetSingleValue result=40 Value=cccccccc 10:39:24 SkyScan query 10:39:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:39:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:25 Parameters OK 10:39:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:25 Set A/D data flow result=40 10:39:25 Set A/D channel type result=40 10:39:25 Set A/D encoding result=40 10:39:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:25 Set channel filter=0.000000e+000 result=40 10:39:25 Config A/D Result=40 10:39:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:25 Get A/D filter: -9.255963e+061 result=40 10:39:25 Get A/D value=-858993460 result=40 10:39:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:25 Parameters OK 10:39:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:25 Set A/D data flow result=40 10:39:25 Set A/D channel type result=40 10:39:25 Set A/D encoding result=40 10:39:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:25 Set channel filter=0.000000e+000 result=40 10:39:25 Config A/D Result=40 10:39:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:25 Get A/D filter: -9.255963e+061 result=40 10:39:25 Get A/D value=-858993460 result=40 10:39:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:25 Aux= 10:39:25 Message to Camera, serial 48607 queued 10:40:01 Received message from Master: op=PointingHead serial=48620 10:40:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:40:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:40:02 Point started: ret=0 10:40:02 point_skyscan result=0 10:40:03 Check angles 10:40:03 SkyScan query 10:40:03 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 10:40:03 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 10:40:03 Check angles 10:40:03 SkyScan query 10:40:04 SkyScan query done: ret=0 az=135.24<-9016 ze=6.495<-11567 Statuses=0009 0008 10:40:04 Msec=750 True Az=135.24 Ze=6.495 Az status=0009 Ze status=0008 10:40:04 Check angles 10:40:04 SkyScan query 10:40:05 SkyScan query done: ret=0 az=117.45<-7830 ze=6.495<-11567 Statuses=0009 0008 10:40:05 Msec=1500 True Az=117.45 Ze=6.495 Az status=0009 Ze status=0008 10:40:05 Check angles 10:40:05 SkyScan query 10:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:40:05 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:40:05 Message to Master queued w/err=0: serial=48620 error=0 10:40:10 Received message from Master: op=Filter serial=48621 10:40:10 Color wheel filter change from 0 to 0 10:40:10 FLIGetFilterPos err=0 currentPosition=0 10:40:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:10 Filter is already there-color wheel unchanged 10:40:11 Received message from Master: op=Shutter serial=48622 10:40:11 Shutter LASER close 10:40:11 Received message from Camera: op=State serial=48624 10:40:11 GetSingleValue result=40 Value=cccccccc 10:40:11 SkyScan query 10:40:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:40:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:11 Parameters OK 10:40:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:11 Set A/D data flow result=40 10:40:11 Set A/D channel type result=40 10:40:11 Set A/D encoding result=40 10:40:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:11 Set channel filter=0.000000e+000 result=40 10:40:11 Config A/D Result=40 10:40:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:11 Get A/D filter: -9.255963e+061 result=40 10:40:11 Get A/D value=-858993460 result=40 10:40:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:11 Parameters OK 10:40:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:11 Set A/D data flow result=40 10:40:11 Set A/D channel type result=40 10:40:11 Set A/D encoding result=40 10:40:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:11 Set channel filter=0.000000e+000 result=40 10:40:11 Config A/D Result=40 10:40:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:11 Get A/D filter: -9.255963e+061 result=40 10:40:11 Get A/D value=-858993460 result=40 10:40:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:11 Aux= 10:40:11 Message to Camera, serial 48624 queued 10:40:48 Received message from Master: op=PointingHead serial=48637 10:40:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:40:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:40:48 Point started: ret=0 10:40:48 point_skyscan result=0 10:40:49 Check angles 10:40:49 SkyScan query 10:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 10:40:50 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 10:40:50 Check angles 10:40:50 SkyScan query 10:40:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 10:40:51 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 10:40:51 Check angles 10:40:51 SkyScan query 10:40:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 10:40:51 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 10:40:51 Check angles 10:40:51 SkyScan query 10:40:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 10:40:52 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 10:40:52 Check angles 10:40:52 SkyScan query 10:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.715<-19181 Statuses=0008 0009 10:40:53 Msec=3000 True Az=112.995 Ze=-107.715 Az status=0008 Ze status=0009 10:40:53 Check angles 10:40:53 SkyScan query 10:40:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 10:40:54 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 10:40:54 Check angles 10:40:54 SkyScan query 10:40:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 10:40:54 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 10:40:54 Check angles 10:40:54 SkyScan query 10:40:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.55<-23370 Statuses=0008 0009 10:40:55 Msec=5250 True Az=112.995 Ze=-170.55 Az status=0008 Ze status=0009 10:40:55 Check angles 10:40:55 SkyScan query 10:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:40:56 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:40:56 Message to Master queued w/err=0: serial=48637 error=0 10:41:01 Received message from Master: op=Filter serial=48638 10:41:01 Color wheel filter change from 0 to 0 10:41:01 FLIGetFilterPos err=0 currentPosition=0 10:41:01 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:01 Filter is already there-color wheel unchanged 10:41:01 Received message from Master: op=Shutter serial=48639 10:41:01 Shutter LASER open 10:41:01 Received message from Camera: op=State serial=48641 10:41:01 GetSingleValue result=40 Value=cccccccc 10:41:01 SkyScan query 10:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:41:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:02 Parameters OK 10:41:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:02 Set A/D data flow result=40 10:41:02 Set A/D channel type result=40 10:41:02 Set A/D encoding result=40 10:41:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:02 Set channel filter=0.000000e+000 result=40 10:41:02 Config A/D Result=40 10:41:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:02 Get A/D filter: -9.255963e+061 result=40 10:41:02 Get A/D value=-858993460 result=40 10:41:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:02 Parameters OK 10:41:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:02 Set A/D data flow result=40 10:41:02 Set A/D channel type result=40 10:41:02 Set A/D encoding result=40 10:41:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:02 Set channel filter=0.000000e+000 result=40 10:41:02 Config A/D Result=40 10:41:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:02 Get A/D filter: -9.255963e+061 result=40 10:41:02 Get A/D value=-858993460 result=40 10:41:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:02 Aux= 10:41:02 Message to Camera, serial 48641 queued 10:41:10 Received message from Master: op=Shutter serial=48651 10:41:10 Shutter LASER close 10:41:11 Received message from Master: op=PointingHead serial=48655 10:41:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:41:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:41:11 Point started: ret=0 10:41:11 point_skyscan result=0 10:41:12 Check angles 10:41:12 SkyScan query 10:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 10:41:12 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 10:41:12 Check angles 10:41:12 SkyScan query 10:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 10:41:13 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 10:41:13 Check angles 10:41:13 SkyScan query 10:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 10:41:14 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 10:41:14 Check angles 10:41:14 SkyScan query 10:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.43<-17362 Statuses=0008 0009 10:41:14 Msec=2250 True Az=112.995 Ze=-80.43 Az status=0008 Ze status=0009 10:41:15 Check angles 10:41:15 SkyScan query 10:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.535<-15969 Statuses=0008 0009 10:41:15 Msec=3000 True Az=112.995 Ze=-59.535 Az status=0008 Ze status=0009 10:41:15 Check angles 10:41:15 SkyScan query 10:41:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.58<-14572 Statuses=0008 0009 10:41:16 Msec=3750 True Az=112.995 Ze=-38.58 Az status=0008 Ze status=0009 10:41:16 Check angles 10:41:16 SkyScan query 10:41:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.625<-13175 Statuses=0008 0009 10:41:17 Msec=4500 True Az=112.995 Ze=-17.625 Az status=0008 Ze status=0009 10:41:17 Check angles 10:41:17 SkyScan query 10:41:17 SkyScan query done: ret=0 az=112.995<-7533 ze=3.33<-11778 Statuses=0008 0009 10:41:17 Msec=5250 True Az=112.995 Ze=3.33 Az status=0008 Ze status=0009 10:41:18 Check angles 10:41:18 SkyScan query 10:41:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:41:18 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:41:18 Message to Master queued w/err=0: serial=48655 error=0 10:41:23 Received message from Master: op=Filter serial=48656 10:41:23 Color wheel filter change from 0 to 0 10:41:23 FLIGetFilterPos err=0 currentPosition=0 10:41:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:23 Filter is already there-color wheel unchanged 10:41:23 Received message from Master: op=Shutter serial=48657 10:41:23 Shutter LASER close 10:41:24 Received message from Camera: op=State serial=48659 10:41:24 GetSingleValue result=40 Value=cccccccc 10:41:24 SkyScan query 10:41:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:41:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:24 Parameters OK 10:41:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:24 Set A/D data flow result=40 10:41:24 Set A/D channel type result=40 10:41:24 Set A/D encoding result=40 10:41:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:24 Set channel filter=0.000000e+000 result=40 10:41:24 Config A/D Result=40 10:41:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:24 Get A/D filter: -9.255963e+061 result=40 10:41:24 Get A/D value=-858993460 result=40 10:41:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:24 Parameters OK 10:41:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:24 Set A/D data flow result=40 10:41:24 Set A/D channel type result=40 10:41:24 Set A/D encoding result=40 10:41:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:24 Set channel filter=0.000000e+000 result=40 10:41:24 Config A/D Result=40 10:41:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:24 Get A/D filter: -9.255963e+061 result=40 10:41:24 Get A/D value=-858993460 result=40 10:41:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:24 Aux= 10:41:24 Message to Camera, serial 48659 queued 10:42:01 Received message from Master: op=PointingHead serial=48672 10:42:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:42:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:42:01 Point started: ret=0 10:42:01 point_skyscan result=0 10:42:02 Check angles 10:42:02 SkyScan query 10:42:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:42:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:42:03 Message to Master queued w/err=0: serial=48672 error=0 10:42:08 Received message from Master: op=Filter serial=48673 10:42:08 Color wheel filter change from 0 to 0 10:42:08 FLIGetFilterPos err=0 currentPosition=0 10:42:08 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:08 Filter is already there-color wheel unchanged 10:42:08 Received message from Master: op=Shutter serial=48674 10:42:08 Shutter LASER close 10:42:08 Received message from Camera: op=State serial=48676 10:42:08 GetSingleValue result=40 Value=cccccccc 10:42:08 SkyScan query 10:42:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:42:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:08 Parameters OK 10:42:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:08 Set A/D data flow result=40 10:42:08 Set A/D channel type result=40 10:42:08 Set A/D encoding result=40 10:42:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:08 Set channel filter=0.000000e+000 result=40 10:42:08 Config A/D Result=40 10:42:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:08 Get A/D filter: -9.255963e+061 result=40 10:42:08 Get A/D value=-858993460 result=40 10:42:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:08 Parameters OK 10:42:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:08 Set A/D data flow result=40 10:42:08 Set A/D channel type result=40 10:42:08 Set A/D encoding result=40 10:42:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:08 Set channel filter=0.000000e+000 result=40 10:42:08 Config A/D Result=40 10:42:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:08 Get A/D filter: -9.255963e+061 result=40 10:42:08 Get A/D value=-858993460 result=40 10:42:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:08 Aux= 10:42:08 Message to Camera, serial 48676 queued 10:42:45 Received message from Master: op=PointingHead serial=48689 10:42:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:42:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:42:46 Point started: ret=0 10:42:46 point_skyscan result=0 10:42:46 Check angles 10:42:46 SkyScan query 10:42:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:42:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:42:47 Message to Master queued w/err=0: serial=48689 error=0 10:42:52 Received message from Master: op=Filter serial=48690 10:42:52 Color wheel filter change from 0 to 0 10:42:52 FLIGetFilterPos err=0 currentPosition=0 10:42:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:52 Filter is already there-color wheel unchanged 10:42:52 Received message from Master: op=Shutter serial=48691 10:42:52 Shutter LASER close 10:42:52 Received message from Camera: op=State serial=48693 10:42:52 GetSingleValue result=40 Value=cccccccc 10:42:52 SkyScan query 10:42:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:42:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:53 Parameters OK 10:42:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:53 Set A/D data flow result=40 10:42:53 Set A/D channel type result=40 10:42:53 Set A/D encoding result=40 10:42:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:53 Set channel filter=0.000000e+000 result=40 10:42:53 Config A/D Result=40 10:42:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:53 Get A/D filter: -9.255963e+061 result=40 10:42:53 Get A/D value=-858993460 result=40 10:42:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:53 Parameters OK 10:42:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:53 Set A/D data flow result=40 10:42:53 Set A/D channel type result=40 10:42:53 Set A/D encoding result=40 10:42:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:53 Set channel filter=0.000000e+000 result=40 10:42:53 Config A/D Result=40 10:42:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:53 Get A/D filter: -9.255963e+061 result=40 10:42:53 Get A/D value=-858993460 result=40 10:42:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:53 Aux= 10:42:53 Message to Camera, serial 48693 queued 10:43:30 Received message from Master: op=PointingHead serial=48706 10:43:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:43:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:43:30 Point started: ret=0 10:43:30 point_skyscan result=0 10:43:31 Check angles 10:43:31 SkyScan query 10:43:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:43:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:43:31 Message to Master queued w/err=0: serial=48706 error=0 10:43:36 Received message from Master: op=Filter serial=48707 10:43:36 Color wheel filter change from 0 to 0 10:43:36 FLIGetFilterPos err=0 currentPosition=0 10:43:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:36 Filter is already there-color wheel unchanged 10:43:36 Received message from Master: op=Shutter serial=48708 10:43:36 Shutter LASER close 10:43:36 Received message from Camera: op=State serial=48710 10:43:36 GetSingleValue result=40 Value=cccccccc 10:43:36 SkyScan query 10:43:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:43:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:37 Parameters OK 10:43:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:37 Set A/D data flow result=40 10:43:37 Set A/D channel type result=40 10:43:37 Set A/D encoding result=40 10:43:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:37 Set channel filter=0.000000e+000 result=40 10:43:37 Config A/D Result=40 10:43:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:37 Get A/D filter: -9.255963e+061 result=40 10:43:37 Get A/D value=-858993460 result=40 10:43:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:37 Parameters OK 10:43:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:37 Set A/D data flow result=40 10:43:37 Set A/D channel type result=40 10:43:37 Set A/D encoding result=40 10:43:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:37 Set channel filter=0.000000e+000 result=40 10:43:37 Config A/D Result=40 10:43:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:37 Get A/D filter: -9.255963e+061 result=40 10:43:37 Get A/D value=-858993460 result=40 10:43:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:37 Aux= 10:43:37 Message to Camera, serial 48710 queued [UTC 2019-3-1 10:43:50] 10:44:14 Received message from Master: op=PointingHead serial=48723 10:44:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:44:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:44:14 Point started: ret=0 10:44:14 point_skyscan result=0 10:44:15 Check angles 10:44:15 SkyScan query 10:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 10:44:16 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 10:44:16 Check angles 10:44:16 SkyScan query 10:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 10:44:16 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 10:44:16 Check angles 10:44:16 SkyScan query 10:44:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 10:44:17 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 10:44:17 Check angles 10:44:17 SkyScan query 10:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.175<-17745 Statuses=0008 0009 10:44:18 Msec=2250 True Az=112.995 Ze=-86.175 Az status=0008 Ze status=0009 10:44:18 Check angles 10:44:18 SkyScan query 10:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.115<-19141 Statuses=0008 0009 10:44:19 Msec=3000 True Az=112.995 Ze=-107.115 Az status=0008 Ze status=0009 10:44:19 Check angles 10:44:19 SkyScan query 10:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.07<-20538 Statuses=0008 0009 10:44:19 Msec=3750 True Az=112.995 Ze=-128.07 Az status=0008 Ze status=0009 10:44:19 Check angles 10:44:19 SkyScan query 10:44:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.04<-21936 Statuses=0008 0009 10:44:20 Msec=4500 True Az=112.995 Ze=-149.04 Az status=0008 Ze status=0009 10:44:20 Check angles 10:44:20 SkyScan query 10:44:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.98<-23332 Statuses=0008 0009 10:44:21 Msec=5250 True Az=112.995 Ze=-169.98 Az status=0008 Ze status=0009 10:44:21 Check angles 10:44:21 SkyScan query 10:44:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:44:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:44:22 Message to Master queued w/err=0: serial=48723 error=0 10:44:27 Received message from Master: op=Filter serial=48724 10:44:27 Color wheel filter change from 0 to 0 10:44:27 FLIGetFilterPos err=0 currentPosition=0 10:44:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:27 Filter is already there-color wheel unchanged 10:44:27 Received message from Master: op=Shutter serial=48725 10:44:27 Shutter LASER open 10:44:27 Received message from Camera: op=State serial=48727 10:44:27 GetSingleValue result=40 Value=cccccccc 10:44:27 SkyScan query 10:44:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:44:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:27 Parameters OK 10:44:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:27 Set A/D data flow result=40 10:44:27 Set A/D channel type result=40 10:44:27 Set A/D encoding result=40 10:44:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:27 Set channel filter=0.000000e+000 result=40 10:44:27 Config A/D Result=40 10:44:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:27 Get A/D filter: -9.255963e+061 result=40 10:44:27 Get A/D value=-858993460 result=40 10:44:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:27 Parameters OK 10:44:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:27 Set A/D data flow result=40 10:44:27 Set A/D channel type result=40 10:44:27 Set A/D encoding result=40 10:44:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:27 Set channel filter=0.000000e+000 result=40 10:44:27 Config A/D Result=40 10:44:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:27 Get A/D filter: -9.255963e+061 result=40 10:44:27 Get A/D value=-858993460 result=40 10:44:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:27 Aux= 10:44:27 Message to Camera, serial 48727 queued 10:44:36 Received message from Master: op=Shutter serial=48737 10:44:36 Shutter LASER close 10:44:37 Received message from Master: op=PointingHead serial=48741 10:44:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:44:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:44:37 Point started: ret=0 10:44:37 point_skyscan result=0 10:44:38 Check angles 10:44:38 SkyScan query 10:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 10:44:38 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 10:44:38 Check angles 10:44:38 SkyScan query 10:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.46<-20164 Statuses=0008 0009 10:44:39 Msec=750 True Az=112.995 Ze=-122.46 Az status=0008 Ze status=0009 10:44:39 Check angles 10:44:39 SkyScan query 10:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.505<-18767 Statuses=0008 0009 10:44:40 Msec=1500 True Az=112.995 Ze=-101.505 Az status=0008 Ze status=0009 10:44:40 Check angles 10:44:40 SkyScan query 10:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.535<-17369 Statuses=0008 0009 10:44:40 Msec=2250 True Az=112.995 Ze=-80.535 Az status=0008 Ze status=0009 10:44:41 Check angles 10:44:41 SkyScan query 10:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.58<-15972 Statuses=0008 0009 10:44:41 Msec=3000 True Az=112.995 Ze=-59.58 Az status=0008 Ze status=0009 10:44:41 Check angles 10:44:41 SkyScan query 10:44:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.625<-14575 Statuses=0008 0009 10:44:42 Msec=3750 True Az=112.995 Ze=-38.625 Az status=0008 Ze status=0009 10:44:42 Check angles 10:44:42 SkyScan query 10:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.67<-13178 Statuses=0008 0009 10:44:43 Msec=4500 True Az=112.995 Ze=-17.67 Az status=0008 Ze status=0009 10:44:43 Check angles 10:44:43 SkyScan query 10:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=3.285<-11781 Statuses=0008 0009 10:44:43 Msec=5250 True Az=112.995 Ze=3.285 Az status=0008 Ze status=0009 10:44:44 Check angles 10:44:44 SkyScan query 10:44:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:44:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:44:44 Message to Master queued w/err=0: serial=48741 error=0 10:44:49 Received message from Master: op=Filter serial=48742 10:44:49 Color wheel filter change from 0 to 0 10:44:49 FLIGetFilterPos err=0 currentPosition=0 10:44:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:49 Filter is already there-color wheel unchanged 10:44:49 Received message from Master: op=Shutter serial=48743 10:44:49 Shutter LASER close 10:44:50 Received message from Camera: op=State serial=48745 10:44:50 GetSingleValue result=40 Value=cccccccc 10:44:50 SkyScan query 10:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:44:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:50 Parameters OK 10:44:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:50 Set A/D data flow result=40 10:44:50 Set A/D channel type result=40 10:44:50 Set A/D encoding result=40 10:44:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:50 Set channel filter=0.000000e+000 result=40 10:44:50 Config A/D Result=40 10:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:50 Get A/D filter: -9.255963e+061 result=40 10:44:50 Get A/D value=-858993460 result=40 10:44:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:50 Parameters OK 10:44:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:50 Set A/D data flow result=40 10:44:50 Set A/D channel type result=40 10:44:50 Set A/D encoding result=40 10:44:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:50 Set channel filter=0.000000e+000 result=40 10:44:50 Config A/D Result=40 10:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:50 Get A/D filter: -9.255963e+061 result=40 10:44:50 Get A/D value=-858993460 result=40 10:44:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:50 Aux= 10:44:50 Message to Camera, serial 48745 queued 10:45:26 Received message from Master: op=PointingHead serial=48757 10:45:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:45:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:45:26 Point started: ret=0 10:45:26 point_skyscan result=0 10:45:27 Check angles 10:45:27 SkyScan query 10:45:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:45:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:45:28 Message to Master queued w/err=0: serial=48757 error=0 10:45:33 Received message from Master: op=Filter serial=48758 10:45:33 Color wheel filter change from 0 to 0 10:45:33 FLIGetFilterPos err=0 currentPosition=0 10:45:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:33 Filter is already there-color wheel unchanged 10:45:33 Received message from Master: op=Shutter serial=48759 10:45:33 Shutter LASER close 10:45:33 Received message from Camera: op=State serial=48761 10:45:33 GetSingleValue result=40 Value=cccccccc 10:45:33 SkyScan query 10:45:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:45:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:33 Parameters OK 10:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:33 Set A/D data flow result=40 10:45:33 Set A/D channel type result=40 10:45:33 Set A/D encoding result=40 10:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:33 Set channel filter=0.000000e+000 result=40 10:45:33 Config A/D Result=40 10:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:33 Get A/D filter: -9.255963e+061 result=40 10:45:33 Get A/D value=-858993460 result=40 10:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:33 Parameters OK 10:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:33 Set A/D data flow result=40 10:45:33 Set A/D channel type result=40 10:45:33 Set A/D encoding result=40 10:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:33 Set channel filter=0.000000e+000 result=40 10:45:33 Config A/D Result=40 10:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:33 Get A/D filter: -9.255963e+061 result=40 10:45:33 Get A/D value=-858993460 result=40 10:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:45:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:45:33 Aux= 10:45:33 Message to Camera, serial 48761 queued 10:46:10 Received message from Master: op=PointingHead serial=48774 10:46:10 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:46:10 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:46:11 Point started: ret=0 10:46:11 point_skyscan result=0 10:46:11 Check angles 10:46:11 SkyScan query 10:46:12 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 10:46:12 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 10:46:12 Check angles 10:46:12 SkyScan query 10:46:13 SkyScan query done: ret=0 az=153.54<-10236 ze=-6.495<-12433 Statuses=0009 0008 10:46:13 Msec=750 True Az=153.54 Ze=-6.495 Az status=0009 Ze status=0008 10:46:13 Check angles 10:46:13 SkyScan query 10:46:13 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 10:46:13 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 10:46:14 Check angles 10:46:14 SkyScan query 10:46:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:46:14 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:46:14 Message to Master queued w/err=0: serial=48774 error=0 10:46:19 Received message from Master: op=Filter serial=48775 10:46:19 Color wheel filter change from 0 to 0 10:46:19 FLIGetFilterPos err=0 currentPosition=0 10:46:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:19 Filter is already there-color wheel unchanged 10:46:19 Received message from Master: op=Shutter serial=48776 10:46:19 Shutter LASER close 10:46:19 Received message from Camera: op=State serial=48778 10:46:19 GetSingleValue result=40 Value=cccccccc 10:46:19 SkyScan query 10:46:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:46:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:20 Parameters OK 10:46:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:20 Set A/D data flow result=40 10:46:20 Set A/D channel type result=40 10:46:20 Set A/D encoding result=40 10:46:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:20 Set channel filter=0.000000e+000 result=40 10:46:20 Config A/D Result=40 10:46:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:20 Get A/D filter: -9.255963e+061 result=40 10:46:20 Get A/D value=-858993460 result=40 10:46:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:20 Parameters OK 10:46:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:20 Set A/D data flow result=40 10:46:20 Set A/D channel type result=40 10:46:20 Set A/D encoding result=40 10:46:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:20 Set channel filter=0.000000e+000 result=40 10:46:20 Config A/D Result=40 10:46:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:20 Get A/D filter: -9.255963e+061 result=40 10:46:20 Get A/D value=-858993460 result=40 10:46:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:20 Aux= 10:46:20 Message to Camera, serial 48778 queued 10:46:57 Received message from Master: op=PointingHead serial=48791 10:46:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:46:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:46:57 Point started: ret=0 10:46:57 point_skyscan result=0 10:46:58 Check angles 10:46:58 SkyScan query 10:46:58 SkyScan query done: ret=0 az=153.195<-10213 ze=6.51<-11566 Statuses=0009 0008 10:46:58 Msec=0 True Az=153.195 Ze=6.51 Az status=0009 Ze status=0008 10:46:59 Check angles 10:46:59 SkyScan query 10:46:59 SkyScan query done: ret=0 az=135.24<-9016 ze=6.495<-11567 Statuses=0009 0008 10:46:59 Msec=750 True Az=135.24 Ze=6.495 Az status=0009 Ze status=0008 10:46:59 Check angles 10:46:59 SkyScan query 10:47:00 SkyScan query done: ret=0 az=117.51<-7834 ze=6.495<-11567 Statuses=0009 0008 10:47:00 Msec=1500 True Az=117.51 Ze=6.495 Az status=0009 Ze status=0008 10:47:00 Check angles 10:47:00 SkyScan query 10:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:01 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:47:01 Message to Master queued w/err=0: serial=48791 error=0 10:47:06 Received message from Master: op=Filter serial=48792 10:47:06 Color wheel filter change from 0 to 0 10:47:06 FLIGetFilterPos err=0 currentPosition=0 10:47:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:06 Filter is already there-color wheel unchanged 10:47:06 Received message from Master: op=Shutter serial=48793 10:47:06 Shutter LASER close 10:47:06 Received message from Camera: op=State serial=48795 10:47:06 GetSingleValue result=40 Value=cccccccc 10:47:06 SkyScan query 10:47:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:07 Parameters OK 10:47:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:07 Set A/D data flow result=40 10:47:07 Set A/D channel type result=40 10:47:07 Set A/D encoding result=40 10:47:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:07 Set channel filter=0.000000e+000 result=40 10:47:07 Config A/D Result=40 10:47:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:07 Get A/D filter: -9.255963e+061 result=40 10:47:07 Get A/D value=-858993460 result=40 10:47:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:07 Parameters OK 10:47:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:07 Set A/D data flow result=40 10:47:07 Set A/D channel type result=40 10:47:07 Set A/D encoding result=40 10:47:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:07 Set channel filter=0.000000e+000 result=40 10:47:07 Config A/D Result=40 10:47:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:07 Get A/D filter: -9.255963e+061 result=40 10:47:07 Get A/D value=-858993460 result=40 10:47:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:07 Aux= 10:47:07 Message to Camera, serial 48795 queued 10:47:43 Received message from Master: op=PointingHead serial=48808 10:47:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:47:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:47:44 Point started: ret=0 10:47:44 point_skyscan result=0 10:47:45 Check angles 10:47:45 SkyScan query 10:47:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 10:47:45 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 10:47:45 Check angles 10:47:45 SkyScan query 10:47:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.19<-14946 Statuses=0008 0009 10:47:46 Msec=750 True Az=112.995 Ze=-44.19 Az status=0008 Ze status=0009 10:47:46 Check angles 10:47:46 SkyScan query 10:47:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 10:47:47 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 10:47:47 Check angles 10:47:47 SkyScan query 10:47:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.955<-17797 Statuses=0008 0009 10:47:47 Msec=2250 True Az=112.995 Ze=-86.955 Az status=0008 Ze status=0009 10:47:48 Check angles 10:47:48 SkyScan query 10:47:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.91<-19194 Statuses=0008 0009 10:47:48 Msec=3000 True Az=112.995 Ze=-107.91 Az status=0008 Ze status=0009 10:47:48 Check angles 10:47:48 SkyScan query 10:47:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.3<-20620 Statuses=0008 0009 10:47:49 Msec=3750 True Az=112.995 Ze=-129.3 Az status=0008 Ze status=0009 10:47:49 Check angles 10:47:49 SkyScan query 10:47:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.675<-22045 Statuses=0008 0009 10:47:50 Msec=4500 True Az=112.995 Ze=-150.675 Az status=0008 Ze status=0009 10:47:50 Check angles 10:47:50 SkyScan query 10:47:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.69<-23446 Statuses=0008 0009 10:47:50 Msec=5250 True Az=112.995 Ze=-171.69 Az status=0008 Ze status=0009 10:47:51 Check angles 10:47:51 SkyScan query 10:47:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:47:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:47:51 Message to Master queued w/err=0: serial=48808 error=0 10:47:56 Received message from Master: op=Filter serial=48809 10:47:56 Color wheel filter change from 0 to 0 10:47:56 FLIGetFilterPos err=0 currentPosition=0 10:47:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:56 Filter is already there-color wheel unchanged 10:47:56 Received message from Master: op=Shutter serial=48810 10:47:56 Shutter LASER open 10:47:57 Received message from Camera: op=State serial=48812 10:47:57 GetSingleValue result=40 Value=cccccccc 10:47:57 SkyScan query 10:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:47:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:57 Parameters OK 10:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:57 Set A/D data flow result=40 10:47:57 Set A/D channel type result=40 10:47:57 Set A/D encoding result=40 10:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:57 Set channel filter=0.000000e+000 result=40 10:47:57 Config A/D Result=40 10:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:57 Get A/D filter: -9.255963e+061 result=40 10:47:57 Get A/D value=-858993460 result=40 10:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:57 Parameters OK 10:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:57 Set A/D data flow result=40 10:47:57 Set A/D channel type result=40 10:47:57 Set A/D encoding result=40 10:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:57 Set channel filter=0.000000e+000 result=40 10:47:57 Config A/D Result=40 10:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:57 Get A/D filter: -9.255963e+061 result=40 10:47:57 Get A/D value=-858993460 result=40 10:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:57 Aux= 10:47:57 Message to Camera, serial 48812 queued 10:48:06 Received message from Master: op=Shutter serial=48822 10:48:06 Shutter LASER close 10:48:06 Received message from Master: op=PointingHead serial=48826 10:48:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:48:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:48:06 Point started: ret=0 10:48:06 point_skyscan result=0 10:48:07 Check angles 10:48:07 SkyScan query 10:48:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 10:48:08 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 10:48:08 Check angles 10:48:08 SkyScan query 10:48:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.4<-20160 Statuses=0008 0009 10:48:08 Msec=750 True Az=112.995 Ze=-122.4 Az status=0008 Ze status=0009 10:48:09 Check angles 10:48:09 SkyScan query 10:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 10:48:09 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 10:48:09 Check angles 10:48:09 SkyScan query 10:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 10:48:10 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 10:48:10 Check angles 10:48:10 SkyScan query 10:48:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 10:48:11 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 10:48:11 Check angles 10:48:11 SkyScan query 10:48:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.115<-14541 Statuses=0008 0009 10:48:11 Msec=3750 True Az=112.995 Ze=-38.115 Az status=0008 Ze status=0009 10:48:12 Check angles 10:48:12 SkyScan query 10:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.725<-13115 Statuses=0008 0009 10:48:12 Msec=4500 True Az=112.995 Ze=-16.725 Az status=0008 Ze status=0009 10:48:12 Check angles 10:48:12 SkyScan query 10:48:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.545<-11697 Statuses=0008 0009 10:48:13 Msec=5250 True Az=112.995 Ze=4.545 Az status=0008 Ze status=0009 10:48:13 Check angles 10:48:13 SkyScan query 10:48:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:48:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:48:14 Message to Master queued w/err=0: serial=48826 error=0 10:48:19 Received message from Master: op=Filter serial=48827 10:48:19 Color wheel filter change from 0 to 0 10:48:19 FLIGetFilterPos err=0 currentPosition=0 10:48:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:19 Filter is already there-color wheel unchanged 10:48:19 Received message from Master: op=Shutter serial=48828 10:48:19 Shutter LASER close 10:48:19 Received message from Camera: op=State serial=48830 10:48:19 GetSingleValue result=40 Value=cccccccc 10:48:19 SkyScan query 10:48:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:48:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:20 Parameters OK 10:48:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:20 Set A/D data flow result=40 10:48:20 Set A/D channel type result=40 10:48:20 Set A/D encoding result=40 10:48:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:20 Set channel filter=0.000000e+000 result=40 10:48:20 Config A/D Result=40 10:48:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:20 Get A/D filter: -9.255963e+061 result=40 10:48:20 Get A/D value=-858993460 result=40 10:48:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:20 Parameters OK 10:48:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:20 Set A/D data flow result=40 10:48:20 Set A/D channel type result=40 10:48:20 Set A/D encoding result=40 10:48:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:20 Set channel filter=0.000000e+000 result=40 10:48:20 Config A/D Result=40 10:48:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:20 Get A/D filter: -9.255963e+061 result=40 10:48:20 Get A/D value=-858993460 result=40 10:48:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:20 Aux= 10:48:20 Message to Camera, serial 48830 queued 10:48:56 Received message from Master: op=PointingHead serial=48843 10:48:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:48:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:48:57 Point started: ret=0 10:48:57 point_skyscan result=0 10:48:58 Check angles 10:48:58 SkyScan query 10:48:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:48:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:48:58 Message to Master queued w/err=0: serial=48843 error=0 10:49:03 Received message from Master: op=Filter serial=48844 10:49:03 Color wheel filter change from 0 to 0 10:49:03 FLIGetFilterPos err=0 currentPosition=0 10:49:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:03 Filter is already there-color wheel unchanged 10:49:03 Received message from Master: op=Shutter serial=48845 10:49:03 Shutter LASER close 10:49:03 Received message from Camera: op=State serial=48847 10:49:03 GetSingleValue result=40 Value=cccccccc 10:49:03 SkyScan query 10:49:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:49:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:04 Parameters OK 10:49:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:04 Set A/D data flow result=40 10:49:04 Set A/D channel type result=40 10:49:04 Set A/D encoding result=40 10:49:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:04 Set channel filter=0.000000e+000 result=40 10:49:04 Config A/D Result=40 10:49:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:04 Get A/D filter: -9.255963e+061 result=40 10:49:04 Get A/D value=-858993460 result=40 10:49:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:04 Parameters OK 10:49:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:04 Set A/D data flow result=40 10:49:04 Set A/D channel type result=40 10:49:04 Set A/D encoding result=40 10:49:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:04 Set channel filter=0.000000e+000 result=40 10:49:04 Config A/D Result=40 10:49:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:04 Get A/D filter: -9.255963e+061 result=40 10:49:04 Get A/D value=-858993460 result=40 10:49:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:04 Aux= 10:49:04 Message to Camera, serial 48847 queued 10:49:40 Received message from Master: op=PointingHead serial=48859 10:49:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:49:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:49:40 Point started: ret=0 10:49:40 point_skyscan result=0 10:49:41 Check angles 10:49:41 SkyScan query 10:49:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:49:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:49:41 Message to Master queued w/err=0: serial=48859 error=0 10:49:46 Received message from Master: op=Filter serial=48860 10:49:46 Color wheel filter change from 0 to 0 10:49:46 FLIGetFilterPos err=0 currentPosition=0 10:49:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:46 Filter is already there-color wheel unchanged 10:49:47 Received message from Master: op=Shutter serial=48861 10:49:47 Shutter LASER close 10:49:47 Received message from Camera: op=State serial=48863 10:49:47 GetSingleValue result=40 Value=cccccccc 10:49:47 SkyScan query 10:49:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:49:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:47 Parameters OK 10:49:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:47 Set A/D data flow result=40 10:49:47 Set A/D channel type result=40 10:49:47 Set A/D encoding result=40 10:49:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:47 Set channel filter=0.000000e+000 result=40 10:49:47 Config A/D Result=40 10:49:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:47 Get A/D filter: -9.255963e+061 result=40 10:49:47 Get A/D value=-858993460 result=40 10:49:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:47 Parameters OK 10:49:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:47 Set A/D data flow result=40 10:49:47 Set A/D channel type result=40 10:49:47 Set A/D encoding result=40 10:49:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:47 Set channel filter=0.000000e+000 result=40 10:49:47 Config A/D Result=40 10:49:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:47 Get A/D filter: -9.255963e+061 result=40 10:49:47 Get A/D value=-858993460 result=40 10:49:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:47 Aux= 10:49:47 Message to Camera, serial 48863 queued 10:50:23 Received message from Master: op=PointingHead serial=48875 10:50:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:50:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:50:23 Point started: ret=0 10:50:23 point_skyscan result=0 10:50:24 Check angles 10:50:24 SkyScan query 10:50:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:50:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:50:25 Message to Master queued w/err=0: serial=48875 error=0 10:50:30 Received message from Master: op=Filter serial=48876 10:50:30 Color wheel filter change from 0 to 0 10:50:30 FLIGetFilterPos err=0 currentPosition=0 10:50:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:30 Filter is already there-color wheel unchanged 10:50:30 Received message from Master: op=Shutter serial=48877 10:50:30 Shutter LASER close 10:50:30 Received message from Camera: op=State serial=48879 10:50:30 GetSingleValue result=40 Value=cccccccc 10:50:30 SkyScan query 10:50:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:50:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:31 Parameters OK 10:50:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:31 Set A/D data flow result=40 10:50:31 Set A/D channel type result=40 10:50:31 Set A/D encoding result=40 10:50:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:31 Set channel filter=0.000000e+000 result=40 10:50:31 Config A/D Result=40 10:50:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:31 Get A/D filter: -9.255963e+061 result=40 10:50:31 Get A/D value=-858993460 result=40 10:50:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:31 Parameters OK 10:50:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:31 Set A/D data flow result=40 10:50:31 Set A/D channel type result=40 10:50:31 Set A/D encoding result=40 10:50:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:31 Set channel filter=0.000000e+000 result=40 10:50:31 Config A/D Result=40 10:50:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:31 Get A/D filter: -9.255963e+061 result=40 10:50:31 Get A/D value=-858993460 result=40 10:50:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:31 Aux= 10:50:31 Message to Camera, serial 48879 queued 10:51:07 Received message from Master: op=PointingHead serial=48892 10:51:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:51:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:51:08 Point started: ret=0 10:51:08 point_skyscan result=0 10:51:09 Check angles 10:51:09 SkyScan query 10:51:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 10:51:09 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 10:51:09 Check angles 10:51:09 SkyScan query 10:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 10:51:10 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 10:51:10 Check angles 10:51:10 SkyScan query 10:51:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 10:51:11 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 10:51:11 Check angles 10:51:11 SkyScan query 10:51:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 10:51:11 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 10:51:12 Check angles 10:51:12 SkyScan query 10:51:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.775<-19185 Statuses=0008 0009 10:51:12 Msec=3000 True Az=112.995 Ze=-107.775 Az status=0008 Ze status=0009 10:51:12 Check angles 10:51:12 SkyScan query 10:51:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.165<-20611 Statuses=0008 0009 10:51:13 Msec=3750 True Az=112.995 Ze=-129.165 Az status=0008 Ze status=0009 10:51:13 Check angles 10:51:13 SkyScan query 10:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.09<-22006 Statuses=0008 0009 10:51:14 Msec=4500 True Az=112.995 Ze=-150.09 Az status=0008 Ze status=0009 10:51:14 Check angles 10:51:14 SkyScan query 10:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.94<-23396 Statuses=0008 0009 10:51:14 Msec=5250 True Az=112.995 Ze=-170.94 Az status=0008 Ze status=0009 10:51:15 Check angles 10:51:15 SkyScan query 10:51:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:51:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:51:15 Message to Master queued w/err=0: serial=48892 error=0 10:51:20 Received message from Master: op=Filter serial=48893 10:51:20 Color wheel filter change from 0 to 0 10:51:20 FLIGetFilterPos err=0 currentPosition=0 10:51:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:20 Filter is already there-color wheel unchanged 10:51:20 Received message from Master: op=Shutter serial=48894 10:51:20 Shutter LASER open 10:51:21 Received message from Camera: op=State serial=48896 10:51:21 GetSingleValue result=40 Value=cccccccc 10:51:21 SkyScan query 10:51:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:51:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:21 Parameters OK 10:51:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:21 Set A/D data flow result=40 10:51:21 Set A/D channel type result=40 10:51:21 Set A/D encoding result=40 10:51:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:21 Set channel filter=0.000000e+000 result=40 10:51:21 Config A/D Result=40 10:51:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:21 Get A/D filter: -9.255963e+061 result=40 10:51:21 Get A/D value=-858993460 result=40 10:51:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:21 Parameters OK 10:51:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:21 Set A/D data flow result=40 10:51:21 Set A/D channel type result=40 10:51:21 Set A/D encoding result=40 10:51:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:21 Set channel filter=0.000000e+000 result=40 10:51:21 Config A/D Result=40 10:51:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:21 Get A/D filter: -9.255963e+061 result=40 10:51:21 Get A/D value=-858993460 result=40 10:51:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:21 Aux= 10:51:21 Message to Camera, serial 48896 queued 10:51:30 Received message from Master: op=Shutter serial=48906 10:51:30 Shutter LASER close 10:51:30 Received message from Master: op=PointingHead serial=48910 10:51:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:51:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:51:30 Point started: ret=0 10:51:30 point_skyscan result=0 10:51:31 Check angles 10:51:31 SkyScan query 10:51:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 10:51:32 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 10:51:32 Check angles 10:51:32 SkyScan query 10:51:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 10:51:32 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 10:51:33 Check angles 10:51:33 SkyScan query 10:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 10:51:33 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 10:51:33 Check angles 10:51:33 SkyScan query 10:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.71<-17314 Statuses=0008 0009 10:51:34 Msec=2250 True Az=112.995 Ze=-79.71 Az status=0008 Ze status=0009 10:51:34 Check angles 10:51:34 SkyScan query 10:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.29<-15886 Statuses=0008 0009 10:51:35 Msec=3000 True Az=112.995 Ze=-58.29 Az status=0008 Ze status=0009 10:51:35 Check angles 10:51:35 SkyScan query 10:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.365<-14491 Statuses=0008 0009 10:51:36 Msec=3750 True Az=112.995 Ze=-37.365 Az status=0008 Ze status=0009 10:51:36 Check angles 10:51:36 SkyScan query 10:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.395<-13093 Statuses=0008 0009 10:51:36 Msec=4500 True Az=112.995 Ze=-16.395 Az status=0008 Ze status=0009 10:51:36 Check angles 10:51:36 SkyScan query 10:51:37 SkyScan query done: ret=0 az=112.995<-7533 ze=4.455<-11703 Statuses=0008 0009 10:51:37 Msec=5250 True Az=112.995 Ze=4.455 Az status=0008 Ze status=0009 10:51:37 Check angles 10:51:37 SkyScan query 10:51:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:51:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:51:38 Message to Master queued w/err=0: serial=48910 error=0 10:51:43 Received message from Master: op=Filter serial=48911 10:51:43 Color wheel filter change from 0 to 0 10:51:43 FLIGetFilterPos err=0 currentPosition=0 10:51:43 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:43 Filter is already there-color wheel unchanged 10:51:43 Received message from Master: op=Shutter serial=48912 10:51:43 Shutter LASER close 10:51:43 Received message from Camera: op=State serial=48914 10:51:43 GetSingleValue result=40 Value=cccccccc 10:51:43 SkyScan query 10:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:51:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:44 Parameters OK 10:51:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:44 Set A/D data flow result=40 10:51:44 Set A/D channel type result=40 10:51:44 Set A/D encoding result=40 10:51:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:44 Set channel filter=0.000000e+000 result=40 10:51:44 Config A/D Result=40 10:51:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:44 Get A/D filter: -9.255963e+061 result=40 10:51:44 Get A/D value=-858993460 result=40 10:51:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:44 Parameters OK 10:51:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:44 Set A/D data flow result=40 10:51:44 Set A/D channel type result=40 10:51:44 Set A/D encoding result=40 10:51:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:44 Set channel filter=0.000000e+000 result=40 10:51:44 Config A/D Result=40 10:51:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:44 Get A/D filter: -9.255963e+061 result=40 10:51:44 Get A/D value=-858993460 result=40 10:51:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:44 Aux= 10:51:44 Message to Camera, serial 48914 queued 10:52:21 Received message from Master: op=PointingHead serial=48927 10:52:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:52:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:52:21 Point started: ret=0 10:52:21 point_skyscan result=0 10:52:22 Check angles 10:52:22 SkyScan query 10:52:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:52:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:52:22 Message to Master queued w/err=0: serial=48927 error=0 10:52:27 Received message from Master: op=Filter serial=48928 10:52:27 Color wheel filter change from 0 to 0 10:52:27 FLIGetFilterPos err=0 currentPosition=0 10:52:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:27 Filter is already there-color wheel unchanged 10:52:27 Received message from Master: op=Shutter serial=48929 10:52:27 Shutter LASER close 10:52:27 Received message from Camera: op=State serial=48931 10:52:27 GetSingleValue result=40 Value=cccccccc 10:52:27 SkyScan query 10:52:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:52:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:28 Parameters OK 10:52:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:28 Set A/D data flow result=40 10:52:28 Set A/D channel type result=40 10:52:28 Set A/D encoding result=40 10:52:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:28 Set channel filter=0.000000e+000 result=40 10:52:28 Config A/D Result=40 10:52:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:28 Get A/D filter: -9.255963e+061 result=40 10:52:28 Get A/D value=-858993460 result=40 10:52:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:28 Parameters OK 10:52:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:28 Set A/D data flow result=40 10:52:28 Set A/D channel type result=40 10:52:28 Set A/D encoding result=40 10:52:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:28 Set channel filter=0.000000e+000 result=40 10:52:28 Config A/D Result=40 10:52:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:28 Get A/D filter: -9.255963e+061 result=40 10:52:28 Get A/D value=-858993460 result=40 10:52:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:28 Aux= 10:52:28 Message to Camera, serial 48931 queued 10:53:05 Received message from Master: op=PointingHead serial=48944 10:53:05 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:53:05 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:53:05 Point started: ret=0 10:53:05 point_skyscan result=0 10:53:06 Check angles 10:53:06 SkyScan query 10:53:07 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 10:53:07 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 10:53:07 Check angles 10:53:07 SkyScan query 10:53:07 SkyScan query done: ret=0 az=154.17<-10278 ze=-6.495<-12433 Statuses=0009 0008 10:53:07 Msec=750 True Az=154.17 Ze=-6.495 Az status=0009 Ze status=0008 10:53:07 Check angles 10:53:07 SkyScan query 10:53:08 SkyScan query done: ret=0 az=171.63<-11442 ze=-6.495<-12433 Statuses=0009 0008 10:53:08 Msec=1500 True Az=171.63 Ze=-6.495 Az status=0009 Ze status=0008 10:53:08 Check angles 10:53:08 SkyScan query 10:53:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:53:09 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:53:09 Message to Master queued w/err=0: serial=48944 error=0 10:53:14 Received message from Master: op=Filter serial=48945 10:53:14 Color wheel filter change from 0 to 0 10:53:14 FLIGetFilterPos err=0 currentPosition=0 10:53:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:14 Filter is already there-color wheel unchanged 10:53:14 Received message from Master: op=Shutter serial=48946 10:53:14 Shutter LASER close 10:53:14 Received message from Camera: op=State serial=48948 10:53:14 GetSingleValue result=40 Value=cccccccc 10:53:14 SkyScan query 10:53:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:53:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:15 Parameters OK 10:53:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:15 Set A/D data flow result=40 10:53:15 Set A/D channel type result=40 10:53:15 Set A/D encoding result=40 10:53:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:15 Set channel filter=0.000000e+000 result=40 10:53:15 Config A/D Result=40 10:53:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:15 Get A/D filter: -9.255963e+061 result=40 10:53:15 Get A/D value=-858993460 result=40 10:53:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:15 Parameters OK 10:53:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:15 Set A/D data flow result=40 10:53:15 Set A/D channel type result=40 10:53:15 Set A/D encoding result=40 10:53:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:15 Set channel filter=0.000000e+000 result=40 10:53:15 Config A/D Result=40 10:53:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:15 Get A/D filter: -9.255963e+061 result=40 10:53:15 Get A/D value=-858993460 result=40 10:53:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:15 Aux= 10:53:15 Message to Camera, serial 48948 queued 10:53:51 Received message from Master: op=PointingHead serial=48961 10:53:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:53:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:53:52 Point started: ret=0 10:53:52 point_skyscan result=0 10:53:53 Check angles 10:53:53 SkyScan query 10:53:53 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 10:53:53 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 10:53:53 Check angles 10:53:53 SkyScan query 10:53:54 SkyScan query done: ret=0 az=135.21<-9014 ze=6.495<-11567 Statuses=0009 0008 10:53:54 Msec=750 True Az=135.21 Ze=6.495 Az status=0009 Ze status=0008 10:53:54 Check angles 10:53:54 SkyScan query 10:53:55 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 10:53:55 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 10:53:55 Check angles 10:53:55 SkyScan query 10:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:53:55 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:53:55 Message to Master queued w/err=0: serial=48961 error=0 10:54:00 Received message from Master: op=Filter serial=48962 10:54:00 Color wheel filter change from 0 to 0 10:54:00 FLIGetFilterPos err=0 currentPosition=0 10:54:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:00 Filter is already there-color wheel unchanged 10:54:01 Received message from Master: op=Shutter serial=48963 10:54:01 Shutter LASER close 10:54:01 Received message from Camera: op=State serial=48965 10:54:01 GetSingleValue result=40 Value=cccccccc 10:54:01 SkyScan query 10:54:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:01 Parameters OK 10:54:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:01 Set A/D data flow result=40 10:54:01 Set A/D channel type result=40 10:54:01 Set A/D encoding result=40 10:54:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:01 Set channel filter=0.000000e+000 result=40 10:54:01 Config A/D Result=40 10:54:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:01 Get A/D filter: -9.255963e+061 result=40 10:54:01 Get A/D value=-858993460 result=40 10:54:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:01 Parameters OK 10:54:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:01 Set A/D data flow result=40 10:54:01 Set A/D channel type result=40 [UTC 2019-3-1 10:54:01] 10:54:01 Set A/D encoding result=40 10:54:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:01 Set channel filter=0.000000e+000 result=40 10:54:01 Config A/D Result=40 10:54:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:01 Get A/D filter: -9.255963e+061 result=40 10:54:01 Get A/D value=-858993460 result=40 10:54:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:01 Aux= 10:54:01 Message to Camera, serial 48965 queued 10:54:38 Received message from Master: op=PointingHead serial=48978 10:54:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:54:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:54:38 Point started: ret=0 10:54:38 point_skyscan result=0 10:54:39 Check angles 10:54:39 SkyScan query 10:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 10:54:40 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 10:54:40 Check angles 10:54:40 SkyScan query 10:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 10:54:40 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 10:54:41 Check angles 10:54:41 SkyScan query 10:54:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 10:54:41 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 10:54:41 Check angles 10:54:41 SkyScan query 10:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.76<-17784 Statuses=0008 0009 10:54:42 Msec=2250 True Az=112.995 Ze=-86.76 Az status=0008 Ze status=0009 10:54:42 Check angles 10:54:42 SkyScan query 10:54:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.715<-19181 Statuses=0008 0009 10:54:43 Msec=3000 True Az=112.995 Ze=-107.715 Az status=0008 Ze status=0009 10:54:43 Check angles 10:54:43 SkyScan query 10:54:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 10:54:43 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 10:54:44 Check angles 10:54:44 SkyScan query 10:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.045<-22003 Statuses=0008 0009 10:54:44 Msec=4500 True Az=112.995 Ze=-150.045 Az status=0008 Ze status=0009 10:54:44 Check angles 10:54:44 SkyScan query 10:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0008 0009 10:54:45 Msec=5250 True Az=112.995 Ze=-170.895 Az status=0008 Ze status=0009 10:54:45 Check angles 10:54:45 SkyScan query 10:54:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:54:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:54:46 Message to Master queued w/err=0: serial=48978 error=0 10:54:51 Received message from Master: op=Filter serial=48979 10:54:51 Color wheel filter change from 0 to 0 10:54:51 FLIGetFilterPos err=0 currentPosition=0 10:54:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:51 Filter is already there-color wheel unchanged 10:54:51 Received message from Master: op=Shutter serial=48980 10:54:51 Shutter LASER open 10:54:51 Received message from Camera: op=State serial=48982 10:54:51 GetSingleValue result=40 Value=cccccccc 10:54:51 SkyScan query 10:54:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:54:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:52 Parameters OK 10:54:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:52 Set A/D data flow result=40 10:54:52 Set A/D channel type result=40 10:54:52 Set A/D encoding result=40 10:54:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:52 Set channel filter=0.000000e+000 result=40 10:54:52 Config A/D Result=40 10:54:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:52 Get A/D filter: -9.255963e+061 result=40 10:54:52 Get A/D value=-858993460 result=40 10:54:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:52 Parameters OK 10:54:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:52 Set A/D data flow result=40 10:54:52 Set A/D channel type result=40 10:54:52 Set A/D encoding result=40 10:54:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:52 Set channel filter=0.000000e+000 result=40 10:54:52 Config A/D Result=40 10:54:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:52 Get A/D filter: -9.255963e+061 result=40 10:54:52 Get A/D value=-858993460 result=40 10:54:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:52 Aux= 10:54:52 Message to Camera, serial 48982 queued 10:55:00 Received message from Master: op=Shutter serial=48992 10:55:00 Shutter LASER close 10:55:01 Received message from Master: op=PointingHead serial=48996 10:55:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:55:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:55:01 Point started: ret=0 10:55:01 point_skyscan result=0 10:55:02 Check angles 10:55:02 SkyScan query 10:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 10:55:02 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 10:55:02 Check angles 10:55:02 SkyScan query 10:55:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 10:55:03 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 10:55:03 Check angles 10:55:03 SkyScan query 10:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 10:55:04 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 10:55:04 Check angles 10:55:04 SkyScan query 10:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.49<-17366 Statuses=0008 0009 10:55:04 Msec=2250 True Az=112.995 Ze=-80.49 Az status=0008 Ze status=0009 10:55:05 Check angles 10:55:05 SkyScan query 10:55:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.535<-15969 Statuses=0008 0009 10:55:05 Msec=3000 True Az=112.995 Ze=-59.535 Az status=0008 Ze status=0009 10:55:05 Check angles 10:55:05 SkyScan query 10:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.595<-14573 Statuses=0008 0009 10:55:06 Msec=3750 True Az=112.995 Ze=-38.595 Az status=0008 Ze status=0009 10:55:06 Check angles 10:55:06 SkyScan query 10:55:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.64<-13176 Statuses=0008 0009 10:55:07 Msec=4500 True Az=112.995 Ze=-17.64 Az status=0008 Ze status=0009 10:55:07 Check angles 10:55:07 SkyScan query 10:55:07 SkyScan query done: ret=0 az=112.995<-7533 ze=3.315<-11779 Statuses=0008 0009 10:55:07 Msec=5250 True Az=112.995 Ze=3.315 Az status=0008 Ze status=0009 10:55:08 Check angles 10:55:08 SkyScan query 10:55:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:55:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:55:08 Message to Master queued w/err=0: serial=48996 error=0 10:55:13 Received message from Master: op=Filter serial=48997 10:55:13 Color wheel filter change from 0 to 0 10:55:13 FLIGetFilterPos err=0 currentPosition=0 10:55:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:13 Filter is already there-color wheel unchanged 10:55:13 Received message from Master: op=Shutter serial=48998 10:55:13 Shutter LASER close 10:55:14 Received message from Camera: op=State serial=49000 10:55:14 GetSingleValue result=40 Value=cccccccc 10:55:14 SkyScan query 10:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:55:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:14 Parameters OK 10:55:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:14 Set A/D data flow result=40 10:55:14 Set A/D channel type result=40 10:55:14 Set A/D encoding result=40 10:55:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:14 Set channel filter=0.000000e+000 result=40 10:55:14 Config A/D Result=40 10:55:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:14 Get A/D filter: -9.255963e+061 result=40 10:55:14 Get A/D value=-858993460 result=40 10:55:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:14 Parameters OK 10:55:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:14 Set A/D data flow result=40 10:55:14 Set A/D channel type result=40 10:55:14 Set A/D encoding result=40 10:55:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:14 Set channel filter=0.000000e+000 result=40 10:55:14 Config A/D Result=40 10:55:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:14 Get A/D filter: -9.255963e+061 result=40 10:55:14 Get A/D value=-858993460 result=40 10:55:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:14 Aux= 10:55:14 Message to Camera, serial 49000 queued 10:55:51 Received message from Master: op=PointingHead serial=49013 10:55:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:55:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:55:51 Point started: ret=0 10:55:51 point_skyscan result=0 10:55:52 Check angles 10:55:52 SkyScan query 10:55:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:55:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:55:53 Message to Master queued w/err=0: serial=49013 error=0 10:55:58 Received message from Master: op=Filter serial=49014 10:55:58 Color wheel filter change from 0 to 0 10:55:58 FLIGetFilterPos err=0 currentPosition=0 10:55:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:58 Filter is already there-color wheel unchanged 10:55:58 Received message from Master: op=Shutter serial=49015 10:55:58 Shutter LASER close 10:55:58 Received message from Camera: op=State serial=49017 10:55:58 GetSingleValue result=40 Value=cccccccc 10:55:58 SkyScan query 10:55:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:55:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:58 Parameters OK 10:55:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:58 Set A/D data flow result=40 10:55:58 Set A/D channel type result=40 10:55:58 Set A/D encoding result=40 10:55:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:58 Set channel filter=0.000000e+000 result=40 10:55:58 Config A/D Result=40 10:55:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:58 Get A/D filter: -9.255963e+061 result=40 10:55:58 Get A/D value=-858993460 result=40 10:55:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:58 Parameters OK 10:55:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:58 Set A/D data flow result=40 10:55:58 Set A/D channel type result=40 10:55:58 Set A/D encoding result=40 10:55:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:58 Set channel filter=0.000000e+000 result=40 10:55:58 Config A/D Result=40 10:55:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:58 Get A/D filter: -9.255963e+061 result=40 10:55:58 Get A/D value=-858993460 result=40 10:55:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:58 Aux= 10:55:58 Message to Camera, serial 49017 queued 10:56:35 Received message from Master: op=PointingHead serial=49030 10:56:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:56:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:56:36 Point started: ret=0 10:56:36 point_skyscan result=0 10:56:36 Check angles 10:56:36 SkyScan query 10:56:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:56:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:56:37 Message to Master queued w/err=0: serial=49030 error=0 10:56:42 Received message from Master: op=Filter serial=49031 10:56:42 Color wheel filter change from 0 to 0 10:56:42 FLIGetFilterPos err=0 currentPosition=0 10:56:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:42 Filter is already there-color wheel unchanged 10:56:42 Received message from Master: op=Shutter serial=49032 10:56:42 Shutter LASER close 10:56:42 Received message from Camera: op=State serial=49034 10:56:42 GetSingleValue result=40 Value=cccccccc 10:56:42 SkyScan query 10:56:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:56:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:43 Parameters OK 10:56:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:43 Set A/D data flow result=40 10:56:43 Set A/D channel type result=40 10:56:43 Set A/D encoding result=40 10:56:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:43 Set channel filter=0.000000e+000 result=40 10:56:43 Config A/D Result=40 10:56:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:43 Get A/D filter: -9.255963e+061 result=40 10:56:43 Get A/D value=-858993460 result=40 10:56:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:43 Parameters OK 10:56:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:43 Set A/D data flow result=40 10:56:43 Set A/D channel type result=40 10:56:43 Set A/D encoding result=40 10:56:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:43 Set channel filter=0.000000e+000 result=40 10:56:43 Config A/D Result=40 10:56:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:43 Get A/D filter: -9.255963e+061 result=40 10:56:43 Get A/D value=-858993460 result=40 10:56:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:43 Aux= 10:56:43 Message to Camera, serial 49034 queued 10:57:19 Received message from Master: op=PointingHead serial=49047 10:57:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:57:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:57:20 Point started: ret=0 10:57:20 point_skyscan result=0 10:57:21 Check angles 10:57:21 SkyScan query 10:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:57:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:57:21 Message to Master queued w/err=0: serial=49047 error=0 10:57:26 Received message from Master: op=Filter serial=49048 10:57:26 Color wheel filter change from 0 to 0 10:57:26 FLIGetFilterPos err=0 currentPosition=0 10:57:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:26 Filter is already there-color wheel unchanged 10:57:26 Received message from Master: op=Shutter serial=49049 10:57:26 Shutter LASER close 10:57:26 Received message from Camera: op=State serial=49051 10:57:26 GetSingleValue result=40 Value=cccccccc 10:57:26 SkyScan query 10:57:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:57:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:27 Parameters OK 10:57:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:27 Set A/D data flow result=40 10:57:27 Set A/D channel type result=40 10:57:27 Set A/D encoding result=40 10:57:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:27 Set channel filter=0.000000e+000 result=40 10:57:27 Config A/D Result=40 10:57:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:27 Get A/D filter: -9.255963e+061 result=40 10:57:27 Get A/D value=-858993460 result=40 10:57:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:27 Parameters OK 10:57:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:27 Set A/D data flow result=40 10:57:27 Set A/D channel type result=40 10:57:27 Set A/D encoding result=40 10:57:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:27 Set channel filter=0.000000e+000 result=40 10:57:27 Config A/D Result=40 10:57:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:27 Get A/D filter: -9.255963e+061 result=40 10:57:27 Get A/D value=-858993460 result=40 10:57:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:27 Aux= 10:57:27 Message to Camera, serial 49051 queued 10:58:04 Received message from Master: op=PointingHead serial=49064 10:58:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:58:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:58:04 Point started: ret=0 10:58:04 point_skyscan result=0 10:58:05 Check angles 10:58:05 SkyScan query 10:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 10:58:05 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 10:58:06 Check angles 10:58:06 SkyScan query 10:58:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.145<-14943 Statuses=0008 0009 10:58:06 Msec=750 True Az=112.995 Ze=-44.145 Az status=0008 Ze status=0009 10:58:06 Check angles 10:58:06 SkyScan query 10:58:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.115<-16341 Statuses=0008 0009 10:58:07 Msec=1500 True Az=112.995 Ze=-65.115 Az status=0008 Ze status=0009 10:58:07 Check angles 10:58:07 SkyScan query 10:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.07<-17738 Statuses=0008 0009 10:58:08 Msec=2250 True Az=112.995 Ze=-86.07 Az status=0008 Ze status=0009 10:58:08 Check angles 10:58:08 SkyScan query 10:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.01<-19134 Statuses=0008 0009 10:58:08 Msec=3000 True Az=112.995 Ze=-107.01 Az status=0008 Ze status=0009 10:58:09 Check angles 10:58:09 SkyScan query 10:58:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.965<-20531 Statuses=0008 0009 10:58:09 Msec=3750 True Az=112.995 Ze=-127.965 Az status=0008 Ze status=0009 10:58:09 Check angles 10:58:09 SkyScan query 10:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.92<-21928 Statuses=0008 0009 10:58:10 Msec=4500 True Az=112.995 Ze=-148.92 Az status=0008 Ze status=0009 10:58:10 Check angles 10:58:10 SkyScan query 10:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.86<-23324 Statuses=0008 0009 10:58:11 Msec=5250 True Az=112.995 Ze=-169.86 Az status=0008 Ze status=0009 10:58:11 Check angles 10:58:11 SkyScan query 10:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:58:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:58:11 Message to Master queued w/err=0: serial=49064 error=0 10:58:16 Received message from Master: op=Filter serial=49065 10:58:16 Color wheel filter change from 0 to 0 10:58:16 FLIGetFilterPos err=0 currentPosition=0 10:58:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:16 Filter is already there-color wheel unchanged 10:58:17 Received message from Master: op=Shutter serial=49066 10:58:17 Shutter LASER open 10:58:17 Received message from Camera: op=State serial=49068 10:58:17 GetSingleValue result=40 Value=cccccccc 10:58:17 SkyScan query 10:58:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:58:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:17 Parameters OK 10:58:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:17 Set A/D data flow result=40 10:58:17 Set A/D channel type result=40 10:58:17 Set A/D encoding result=40 10:58:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:17 Set channel filter=0.000000e+000 result=40 10:58:17 Config A/D Result=40 10:58:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:17 Get A/D filter: -9.255963e+061 result=40 10:58:17 Get A/D value=-858993460 result=40 10:58:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:17 Parameters OK 10:58:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:17 Set A/D data flow result=40 10:58:17 Set A/D channel type result=40 10:58:17 Set A/D encoding result=40 10:58:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:17 Set channel filter=0.000000e+000 result=40 10:58:17 Config A/D Result=40 10:58:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:17 Get A/D filter: -9.255963e+061 result=40 10:58:17 Get A/D value=-858993460 result=40 10:58:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:17 Aux= 10:58:17 Message to Camera, serial 49068 queued 10:58:26 Received message from Master: op=Shutter serial=49078 10:58:26 Shutter LASER close 10:58:26 Received message from Master: op=PointingHead serial=49082 10:58:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:58:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:58:27 Point started: ret=0 10:58:27 point_skyscan result=0 10:58:28 Check angles 10:58:28 SkyScan query 10:58:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 10:58:28 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 10:58:28 Check angles 10:58:28 SkyScan query 10:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 10:58:29 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 10:58:29 Check angles 10:58:29 SkyScan query 10:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.83<-18722 Statuses=0008 0009 10:58:30 Msec=1500 True Az=112.995 Ze=-100.83 Az status=0008 Ze status=0009 10:58:30 Check angles 10:58:30 SkyScan query 10:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 10:58:30 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 10:58:31 Check angles 10:58:31 SkyScan query 10:58:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 10:58:31 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 10:58:31 Check angles 10:58:31 SkyScan query 10:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 10:58:32 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 10:58:32 Check angles 10:58:32 SkyScan query 10:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.545<-13103 Statuses=0008 0009 10:58:33 Msec=4500 True Az=112.995 Ze=-16.545 Az status=0008 Ze status=0009 10:58:33 Check angles 10:58:33 SkyScan query 10:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=4.68<-11688 Statuses=0008 0009 10:58:33 Msec=5250 True Az=112.995 Ze=4.68 Az status=0008 Ze status=0009 10:58:34 Check angles 10:58:34 SkyScan query 10:58:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:58:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:58:34 Message to Master queued w/err=0: serial=49082 error=0 10:58:39 Received message from Master: op=Filter serial=49083 10:58:39 Color wheel filter change from 0 to 0 10:58:39 FLIGetFilterPos err=0 currentPosition=0 10:58:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:39 Filter is already there-color wheel unchanged 10:58:39 Received message from Master: op=Shutter serial=49084 10:58:39 Shutter LASER close 10:58:39 Received message from Camera: op=State serial=49086 10:58:39 GetSingleValue result=40 Value=cccccccc 10:58:39 SkyScan query 10:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:58:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:40 Parameters OK 10:58:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:40 Set A/D data flow result=40 10:58:40 Set A/D channel type result=40 10:58:40 Set A/D encoding result=40 10:58:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:40 Set channel filter=0.000000e+000 result=40 10:58:40 Config A/D Result=40 10:58:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:40 Get A/D filter: -9.255963e+061 result=40 10:58:40 Get A/D value=-858993460 result=40 10:58:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:40 Parameters OK 10:58:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:40 Set A/D data flow result=40 10:58:40 Set A/D channel type result=40 10:58:40 Set A/D encoding result=40 10:58:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:40 Set channel filter=0.000000e+000 result=40 10:58:40 Config A/D Result=40 10:58:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:40 Get A/D filter: -9.255963e+061 result=40 10:58:40 Get A/D value=-858993460 result=40 10:58:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:40 Aux= 10:58:40 Message to Camera, serial 49086 queued 10:59:17 Received message from Master: op=PointingHead serial=49099 10:59:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:59:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:59:17 Point started: ret=0 10:59:17 point_skyscan result=0 10:59:18 Check angles 10:59:18 SkyScan query 10:59:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:59:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:59:19 Message to Master queued w/err=0: serial=49099 error=0 10:59:24 Received message from Master: op=Filter serial=49100 10:59:24 Color wheel filter change from 0 to 0 10:59:24 FLIGetFilterPos err=0 currentPosition=0 10:59:24 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:24 Filter is already there-color wheel unchanged 10:59:24 Received message from Master: op=Shutter serial=49101 10:59:24 Shutter LASER close 10:59:24 Received message from Camera: op=State serial=49103 10:59:24 GetSingleValue result=40 Value=cccccccc 10:59:24 SkyScan query 10:59:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:59:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:24 Parameters OK 10:59:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:24 Set A/D data flow result=40 10:59:24 Set A/D channel type result=40 10:59:24 Set A/D encoding result=40 10:59:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:24 Set channel filter=0.000000e+000 result=40 10:59:24 Config A/D Result=40 10:59:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:24 Get A/D filter: -9.255963e+061 result=40 10:59:24 Get A/D value=-858993460 result=40 10:59:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:24 Parameters OK 10:59:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:24 Set A/D data flow result=40 10:59:24 Set A/D channel type result=40 10:59:24 Set A/D encoding result=40 10:59:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:24 Set channel filter=0.000000e+000 result=40 10:59:24 Config A/D Result=40 10:59:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:24 Get A/D filter: -9.255963e+061 result=40 10:59:24 Get A/D value=-858993460 result=40 10:59:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:24 Aux= 10:59:24 Message to Camera, serial 49103 queued 11:00:01 Received message from Master: op=PointingHead serial=49116 11:00:01 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:00:01 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:00:02 Point started: ret=0 11:00:02 point_skyscan result=0 11:00:02 Check angles 11:00:02 SkyScan query 11:00:03 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 11:00:03 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 11:00:03 Check angles 11:00:03 SkyScan query 11:00:04 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 11:00:04 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 11:00:04 Check angles 11:00:04 SkyScan query 11:00:04 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 11:00:04 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 11:00:05 Check angles 11:00:05 SkyScan query 11:00:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:00:05 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:00:05 Message to Master queued w/err=0: serial=49116 error=0 11:00:10 Received message from Master: op=Filter serial=49117 11:00:10 Color wheel filter change from 0 to 0 11:00:10 FLIGetFilterPos err=0 currentPosition=0 11:00:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:10 Filter is already there-color wheel unchanged 11:00:10 Received message from Master: op=Shutter serial=49118 11:00:10 Shutter LASER close 11:00:10 Received message from Camera: op=State serial=49120 11:00:10 GetSingleValue result=40 Value=cccccccc 11:00:10 SkyScan query 11:00:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:00:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:11 Parameters OK 11:00:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:11 Set A/D data flow result=40 11:00:11 Set A/D channel type result=40 11:00:11 Set A/D encoding result=40 11:00:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:11 Set channel filter=0.000000e+000 result=40 11:00:11 Config A/D Result=40 11:00:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:11 Get A/D filter: -9.255963e+061 result=40 11:00:11 Get A/D value=-858993460 result=40 11:00:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:11 Parameters OK 11:00:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:11 Set A/D data flow result=40 11:00:11 Set A/D channel type result=40 11:00:11 Set A/D encoding result=40 11:00:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:11 Set channel filter=0.000000e+000 result=40 11:00:11 Config A/D Result=40 11:00:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:11 Get A/D filter: -9.255963e+061 result=40 11:00:11 Get A/D value=-858993460 result=40 11:00:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:11 Aux= 11:00:11 Message to Camera, serial 49120 queued 11:00:48 Received message from Master: op=PointingHead serial=49133 11:00:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:00:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:00:48 Point started: ret=0 11:00:48 point_skyscan result=0 11:00:49 Check angles 11:00:49 SkyScan query 11:00:50 SkyScan query done: ret=0 az=152.67<-10178 ze=6.51<-11566 Statuses=0009 0008 11:00:50 Msec=0 True Az=152.67 Ze=6.51 Az status=0009 Ze status=0008 11:00:50 Check angles 11:00:50 SkyScan query 11:00:50 SkyScan query done: ret=0 az=135.21<-9014 ze=6.495<-11567 Statuses=0009 0008 11:00:50 Msec=750 True Az=135.21 Ze=6.495 Az status=0009 Ze status=0008 11:00:50 Check angles 11:00:50 SkyScan query 11:00:51 SkyScan query done: ret=0 az=117.315<-7821 ze=6.495<-11567 Statuses=0009 0008 11:00:51 Msec=1500 True Az=117.315 Ze=6.495 Az status=0009 Ze status=0008 11:00:51 Check angles 11:00:51 SkyScan query 11:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:00:52 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:00:52 Message to Master queued w/err=0: serial=49133 error=0 11:00:57 Received message from Master: op=Filter serial=49134 11:00:57 Color wheel filter change from 0 to 0 11:00:57 FLIGetFilterPos err=0 currentPosition=0 11:00:57 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:57 Filter is already there-color wheel unchanged 11:00:57 Received message from Master: op=Shutter serial=49135 11:00:57 Shutter LASER close 11:00:57 Received message from Camera: op=State serial=49137 11:00:57 GetSingleValue result=40 Value=cccccccc 11:00:57 SkyScan query 11:00:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:00:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:58 Parameters OK 11:00:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:58 Set A/D data flow result=40 11:00:58 Set A/D channel type result=40 11:00:58 Set A/D encoding result=40 11:00:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:58 Set channel filter=0.000000e+000 result=40 11:00:58 Config A/D Result=40 11:00:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:58 Get A/D filter: -9.255963e+061 result=40 11:00:58 Get A/D value=-858993460 result=40 11:00:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:58 Parameters OK 11:00:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:58 Set A/D data flow result=40 11:00:58 Set A/D channel type result=40 11:00:58 Set A/D encoding result=40 11:00:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:58 Set channel filter=0.000000e+000 result=40 11:00:58 Config A/D Result=40 11:00:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:58 Get A/D filter: -9.255963e+061 result=40 11:00:58 Get A/D value=-858993460 result=40 11:00:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:58 Aux= 11:00:58 Message to Camera, serial 49137 queued 11:01:34 Received message from Master: op=PointingHead serial=49150 11:01:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:01:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:01:35 Point started: ret=0 11:01:35 point_skyscan result=0 11:01:36 Check angles 11:01:36 SkyScan query 11:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.61<-13574 Statuses=0008 0009 11:01:36 Msec=0 True Az=112.995 Ze=-23.61 Az status=0008 Ze status=0009 11:01:36 Check angles 11:01:36 SkyScan query 11:01:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 11:01:37 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 11:01:37 Check angles 11:01:37 SkyScan query 11:01:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 11:01:38 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 11:01:38 Check angles 11:01:38 SkyScan query 11:01:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 11:01:38 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 11:01:39 Check angles 11:01:39 SkyScan query 11:01:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.285<-19219 Statuses=0008 0009 11:01:39 Msec=3000 True Az=112.995 Ze=-108.285 Az status=0008 Ze status=0009 11:01:39 Check angles 11:01:39 SkyScan query 11:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.24<-20616 Statuses=0008 0009 11:01:40 Msec=3750 True Az=112.995 Ze=-129.24 Az status=0008 Ze status=0009 11:01:40 Check angles 11:01:40 SkyScan query 11:01:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.615<-22041 Statuses=0008 0009 11:01:41 Msec=4500 True Az=112.995 Ze=-150.615 Az status=0008 Ze status=0009 11:01:41 Check angles 11:01:41 SkyScan query 11:01:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.66<-23444 Statuses=0008 0009 11:01:41 Msec=5250 True Az=112.995 Ze=-171.66 Az status=0008 Ze status=0009 11:01:42 Check angles 11:01:42 SkyScan query 11:01:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:01:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:01:42 Message to Master queued w/err=0: serial=49150 error=0 11:01:47 Received message from Master: op=Filter serial=49151 11:01:47 Color wheel filter change from 0 to 0 11:01:47 FLIGetFilterPos err=0 currentPosition=0 11:01:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:47 Filter is already there-color wheel unchanged 11:01:47 Received message from Master: op=Shutter serial=49152 11:01:47 Shutter LASER open 11:01:48 Received message from Camera: op=State serial=49154 11:01:48 GetSingleValue result=40 Value=cccccccc 11:01:48 SkyScan query 11:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:01:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:48 Parameters OK 11:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:48 Set A/D data flow result=40 11:01:48 Set A/D channel type result=40 11:01:48 Set A/D encoding result=40 11:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:48 Set channel filter=0.000000e+000 result=40 11:01:48 Config A/D Result=40 11:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:48 Get A/D filter: -9.255963e+061 result=40 11:01:48 Get A/D value=-858993460 result=40 11:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:48 Parameters OK 11:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:48 Set A/D data flow result=40 11:01:48 Set A/D channel type result=40 11:01:48 Set A/D encoding result=40 11:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:48 Set channel filter=0.000000e+000 result=40 11:01:48 Config A/D Result=40 11:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:48 Get A/D filter: -9.255963e+061 result=40 11:01:48 Get A/D value=-858993460 result=40 11:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:48 Aux= 11:01:48 Message to Camera, serial 49154 queued 11:01:57 Received message from Master: op=Shutter serial=49164 11:01:57 Shutter LASER close 11:01:57 Received message from Master: op=PointingHead serial=49168 11:01:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:01:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:01:57 Point started: ret=0 11:01:57 point_skyscan result=0 11:01:58 Check angles 11:01:58 SkyScan query 11:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.86<-21524 Statuses=0008 0009 11:01:59 Msec=0 True Az=112.995 Ze=-142.86 Az status=0008 Ze status=0009 11:01:59 Check angles 11:01:59 SkyScan query 11:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.5<-20100 Statuses=0008 0009 11:01:59 Msec=750 True Az=112.995 Ze=-121.5 Az status=0008 Ze status=0009 11:02:00 Check angles 11:02:00 SkyScan query 11:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.545<-18703 Statuses=0008 0009 11:02:00 Msec=1500 True Az=112.995 Ze=-100.545 Az status=0008 Ze status=0009 11:02:00 Check angles 11:02:00 SkyScan query 11:02:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.575<-17305 Statuses=0008 0009 11:02:01 Msec=2250 True Az=112.995 Ze=-79.575 Az status=0008 Ze status=0009 11:02:01 Check angles 11:02:01 SkyScan query 11:02:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.155<-15877 Statuses=0008 0009 11:02:02 Msec=3000 True Az=112.995 Ze=-58.155 Az status=0008 Ze status=0009 11:02:02 Check angles 11:02:02 SkyScan query 11:02:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.23<-14482 Statuses=0008 0009 11:02:02 Msec=3750 True Az=112.995 Ze=-37.23 Az status=0008 Ze status=0009 11:02:03 Check angles 11:02:03 SkyScan query 11:02:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.245<-13083 Statuses=0008 0009 11:02:03 Msec=4500 True Az=112.995 Ze=-16.245 Az status=0008 Ze status=0009 11:02:03 Check angles 11:02:03 SkyScan query 11:02:04 SkyScan query done: ret=0 az=112.995<-7533 ze=4.89<-11674 Statuses=0008 0009 11:02:04 Msec=5250 True Az=112.995 Ze=4.89 Az status=0008 Ze status=0009 11:02:04 Check angles 11:02:04 SkyScan query 11:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:02:05 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:02:05 Message to Master queued w/err=0: serial=49168 error=0 11:02:10 Received message from Master: op=Filter serial=49169 11:02:10 Color wheel filter change from 0 to 0 11:02:10 FLIGetFilterPos err=0 currentPosition=0 11:02:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:10 Filter is already there-color wheel unchanged 11:02:10 Received message from Master: op=Shutter serial=49170 11:02:10 Shutter LASER close 11:02:10 Received message from Camera: op=State serial=49172 11:02:10 GetSingleValue result=40 Value=cccccccc 11:02:10 SkyScan query 11:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:02:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:11 Parameters OK 11:02:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:11 Set A/D data flow result=40 11:02:11 Set A/D channel type result=40 11:02:11 Set A/D encoding result=40 11:02:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:11 Set channel filter=0.000000e+000 result=40 11:02:11 Config A/D Result=40 11:02:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:11 Get A/D filter: -9.255963e+061 result=40 11:02:11 Get A/D value=-858993460 result=40 11:02:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:11 Parameters OK 11:02:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:11 Set A/D data flow result=40 11:02:11 Set A/D channel type result=40 11:02:11 Set A/D encoding result=40 11:02:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:11 Set channel filter=0.000000e+000 result=40 11:02:11 Config A/D Result=40 11:02:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:11 Get A/D filter: -9.255963e+061 result=40 11:02:11 Get A/D value=-858993460 result=40 11:02:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:11 Aux= 11:02:11 Message to Camera, serial 49172 queued 11:02:47 Received message from Master: op=PointingHead serial=49185 11:02:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:02:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:02:48 Point started: ret=0 11:02:48 point_skyscan result=0 11:02:49 Check angles 11:02:49 SkyScan query 11:02:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:02:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:02:49 Message to Master queued w/err=0: serial=49185 error=0 11:02:54 Received message from Master: op=Filter serial=49186 11:02:54 Color wheel filter change from 0 to 0 11:02:54 FLIGetFilterPos err=0 currentPosition=0 11:02:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:54 Filter is already there-color wheel unchanged 11:02:54 Received message from Master: op=Shutter serial=49187 11:02:54 Shutter LASER close 11:02:54 Received message from Camera: op=State serial=49189 11:02:54 GetSingleValue result=40 Value=cccccccc 11:02:54 SkyScan query 11:02:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:02:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:55 Parameters OK 11:02:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:55 Set A/D data flow result=40 11:02:55 Set A/D channel type result=40 11:02:55 Set A/D encoding result=40 11:02:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:55 Set channel filter=0.000000e+000 result=40 11:02:55 Config A/D Result=40 11:02:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:55 Get A/D filter: -9.255963e+061 result=40 11:02:55 Get A/D value=-858993460 result=40 11:02:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:55 Parameters OK 11:02:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:55 Set A/D data flow result=40 11:02:55 Set A/D channel type result=40 11:02:55 Set A/D encoding result=40 11:02:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:55 Set channel filter=0.000000e+000 result=40 11:02:55 Config A/D Result=40 11:02:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:55 Get A/D filter: -9.255963e+061 result=40 11:02:55 Get A/D value=-858993460 result=40 11:02:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:55 Aux= 11:02:55 Message to Camera, serial 49189 queued 11:03:32 Received message from Master: op=PointingHead serial=49202 11:03:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:03:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:03:32 Point started: ret=0 11:03:32 point_skyscan result=0 11:03:33 Check angles 11:03:33 SkyScan query 11:03:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:03:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:03:33 Message to Master queued w/err=0: serial=49202 error=0 11:03:38 Received message from Master: op=Identify serial=49203 11:03:38 Received message from Master: op=Filter serial=49206 11:03:38 Color wheel filter change from 0 to 0 11:03:38 FLIGetFilterPos err=0 currentPosition=0 11:03:38 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:38 Filter is already there-color wheel unchanged 11:03:39 Received message from Master: op=Shutter serial=49207 11:03:39 Shutter LASER close 11:03:39 Received message from Camera: op=State serial=49209 11:03:39 GetSingleValue result=40 Value=cccccccc 11:03:39 SkyScan query 11:03:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:03:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:39 Parameters OK 11:03:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:39 Set A/D data flow result=40 11:03:39 Set A/D channel type result=40 11:03:39 Set A/D encoding result=40 11:03:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:39 Set channel filter=0.000000e+000 result=40 11:03:39 Config A/D Result=40 11:03:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:39 Get A/D filter: -9.255963e+061 result=40 11:03:39 Get A/D value=-858993460 result=40 11:03:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:39 Parameters OK 11:03:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:39 Set A/D data flow result=40 11:03:39 Set A/D channel type result=40 11:03:39 Set A/D encoding result=40 11:03:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:39 Set channel filter=0.000000e+000 result=40 11:03:39 Config A/D Result=40 11:03:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:39 Get A/D filter: -9.255963e+061 result=40 11:03:39 Get A/D value=-858993460 result=40 11:03:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:39 Aux= 11:03:39 Message to Camera, serial 49209 queued [UTC 2019-3-1 11:03:50] 11:04:15 Received message from Master: op=PointingHead serial=49221 11:04:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:04:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:04:15 Point started: ret=0 11:04:15 point_skyscan result=0 11:04:16 Check angles 11:04:16 SkyScan query 11:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:04:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:04:17 Message to Master queued w/err=0: serial=49221 error=0 11:04:22 Received message from Master: op=Filter serial=49222 11:04:22 Color wheel filter change from 0 to 0 11:04:22 FLIGetFilterPos err=0 currentPosition=0 11:04:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:22 Filter is already there-color wheel unchanged 11:04:22 Received message from Master: op=Shutter serial=49223 11:04:22 Shutter LASER close 11:04:22 Received message from Camera: op=State serial=49225 11:04:22 GetSingleValue result=40 Value=cccccccc 11:04:22 SkyScan query 11:04:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:04:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:23 Parameters OK 11:04:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:23 Set A/D data flow result=40 11:04:23 Set A/D channel type result=40 11:04:23 Set A/D encoding result=40 11:04:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:23 Set channel filter=0.000000e+000 result=40 11:04:23 Config A/D Result=40 11:04:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:23 Get A/D filter: -9.255963e+061 result=40 11:04:23 Get A/D value=-858993460 result=40 11:04:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:23 Parameters OK 11:04:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:23 Set A/D data flow result=40 11:04:23 Set A/D channel type result=40 11:04:23 Set A/D encoding result=40 11:04:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:23 Set channel filter=0.000000e+000 result=40 11:04:23 Config A/D Result=40 11:04:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:23 Get A/D filter: -9.255963e+061 result=40 11:04:23 Get A/D value=-858993460 result=40 11:04:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:23 Aux= 11:04:23 Message to Camera, serial 49225 queued 11:04:59 Received message from Master: op=PointingHead serial=49238 11:04:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:04:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:05:00 Point started: ret=0 11:05:00 point_skyscan result=0 11:05:01 Check angles 11:05:01 SkyScan query 11:05:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 11:05:01 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 11:05:01 Check angles 11:05:01 SkyScan query 11:05:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 11:05:02 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 11:05:02 Check angles 11:05:02 SkyScan query 11:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 11:05:03 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 11:05:03 Check angles 11:05:03 SkyScan query 11:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 11:05:03 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 11:05:04 Check angles 11:05:04 SkyScan query 11:05:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.58<-19172 Statuses=0008 0009 11:05:04 Msec=3000 True Az=112.995 Ze=-107.58 Az status=0008 Ze status=0009 11:05:04 Check angles 11:05:04 SkyScan query 11:05:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 11:05:05 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 11:05:05 Check angles 11:05:05 SkyScan query 11:05:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.895<-21993 Statuses=0008 0009 11:05:06 Msec=4500 True Az=112.995 Ze=-149.895 Az status=0008 Ze status=0009 11:05:06 Check angles 11:05:06 SkyScan query 11:05:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.79<-23386 Statuses=0008 0009 11:05:06 Msec=5250 True Az=112.995 Ze=-170.79 Az status=0008 Ze status=0009 11:05:07 Check angles 11:05:07 SkyScan query 11:05:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:05:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:05:07 Message to Master queued w/err=0: serial=49238 error=0 11:05:12 Received message from Master: op=Filter serial=49239 11:05:12 Color wheel filter change from 0 to 0 11:05:12 FLIGetFilterPos err=0 currentPosition=0 11:05:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:12 Filter is already there-color wheel unchanged 11:05:12 Received message from Master: op=Shutter serial=49240 11:05:12 Shutter LASER open 11:05:12 Received message from Camera: op=State serial=49242 11:05:12 GetSingleValue result=40 Value=cccccccc 11:05:12 SkyScan query 11:05:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:05:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:13 Parameters OK 11:05:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:13 Set A/D data flow result=40 11:05:13 Set A/D channel type result=40 11:05:13 Set A/D encoding result=40 11:05:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:13 Set channel filter=0.000000e+000 result=40 11:05:13 Config A/D Result=40 11:05:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:13 Get A/D filter: -9.255963e+061 result=40 11:05:13 Get A/D value=-858993460 result=40 11:05:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:13 Parameters OK 11:05:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:13 Set A/D data flow result=40 11:05:13 Set A/D channel type result=40 11:05:13 Set A/D encoding result=40 11:05:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:13 Set channel filter=0.000000e+000 result=40 11:05:13 Config A/D Result=40 11:05:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:13 Get A/D filter: -9.255963e+061 result=40 11:05:13 Get A/D value=-858993460 result=40 11:05:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:13 Aux= 11:05:13 Message to Camera, serial 49242 queued 11:05:21 Received message from Master: op=Shutter serial=49251 11:05:21 Shutter LASER close 11:05:21 Received message from Master: op=PointingHead serial=49255 11:05:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:05:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:05:21 Point started: ret=0 11:05:21 point_skyscan result=0 11:05:22 Check angles 11:05:22 SkyScan query 11:05:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 11:05:23 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 11:05:23 Check angles 11:05:23 SkyScan query 11:05:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 11:05:24 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 11:05:24 Check angles 11:05:24 SkyScan query 11:05:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 11:05:24 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 11:05:24 Check angles 11:05:24 SkyScan query 11:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 11:05:25 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 11:05:25 Check angles 11:05:25 SkyScan query 11:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.61<-15974 Statuses=0008 0009 11:05:26 Msec=3000 True Az=112.995 Ze=-59.61 Az status=0008 Ze status=0009 11:05:26 Check angles 11:05:26 SkyScan query 11:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.655<-14577 Statuses=0008 0009 11:05:27 Msec=3750 True Az=112.995 Ze=-38.655 Az status=0008 Ze status=0009 11:05:27 Check angles 11:05:27 SkyScan query 11:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.7<-13180 Statuses=0008 0009 11:05:27 Msec=4500 True Az=112.995 Ze=-17.7 Az status=0008 Ze status=0009 11:05:27 Check angles 11:05:27 SkyScan query 11:05:28 SkyScan query done: ret=0 az=112.995<-7533 ze=3.255<-11783 Statuses=0008 0009 11:05:28 Msec=5250 True Az=112.995 Ze=3.255 Az status=0008 Ze status=0009 11:05:28 Check angles 11:05:28 SkyScan query 11:05:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:05:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:05:29 Message to Master queued w/err=0: serial=49255 error=0 11:05:34 Received message from Master: op=Filter serial=49256 11:05:34 Color wheel filter change from 0 to 0 11:05:34 FLIGetFilterPos err=0 currentPosition=0 11:05:34 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:34 Filter is already there-color wheel unchanged 11:05:34 Received message from Master: op=Shutter serial=49257 11:05:34 Shutter LASER close 11:05:34 Received message from Camera: op=State serial=49259 11:05:34 GetSingleValue result=40 Value=cccccccc 11:05:34 SkyScan query 11:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:05:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:35 Parameters OK 11:05:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:35 Set A/D data flow result=40 11:05:35 Set A/D channel type result=40 11:05:35 Set A/D encoding result=40 11:05:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:35 Set channel filter=0.000000e+000 result=40 11:05:35 Config A/D Result=40 11:05:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:35 Get A/D filter: -9.255963e+061 result=40 11:05:35 Get A/D value=-858993460 result=40 11:05:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:35 Parameters OK 11:05:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:35 Set A/D data flow result=40 11:05:35 Set A/D channel type result=40 11:05:35 Set A/D encoding result=40 11:05:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:35 Set channel filter=0.000000e+000 result=40 11:05:35 Config A/D Result=40 11:05:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:35 Get A/D filter: -9.255963e+061 result=40 11:05:35 Get A/D value=-858993460 result=40 11:05:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:35 Aux= 11:05:35 Message to Camera, serial 49259 queued 11:06:12 Received message from Master: op=PointingHead serial=49272 11:06:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:06:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:06:12 Point started: ret=0 11:06:12 point_skyscan result=0 11:06:13 Check angles 11:06:13 SkyScan query 11:06:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:06:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:06:13 Message to Master queued w/err=0: serial=49272 error=0 11:06:18 Received message from Master: op=Filter serial=49273 11:06:18 Color wheel filter change from 0 to 0 11:06:18 FLIGetFilterPos err=0 currentPosition=0 11:06:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:18 Filter is already there-color wheel unchanged 11:06:18 Received message from Master: op=Shutter serial=49274 11:06:18 Shutter LASER close 11:06:18 Received message from Camera: op=State serial=49276 11:06:18 GetSingleValue result=40 Value=cccccccc 11:06:18 SkyScan query 11:06:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:06:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:19 Parameters OK 11:06:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:19 Set A/D data flow result=40 11:06:19 Set A/D channel type result=40 11:06:19 Set A/D encoding result=40 11:06:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:19 Set channel filter=0.000000e+000 result=40 11:06:19 Config A/D Result=40 11:06:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:19 Get A/D filter: -9.255963e+061 result=40 11:06:19 Get A/D value=-858993460 result=40 11:06:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:19 Parameters OK 11:06:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:19 Set A/D data flow result=40 11:06:19 Set A/D channel type result=40 11:06:19 Set A/D encoding result=40 11:06:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:19 Set channel filter=0.000000e+000 result=40 11:06:19 Config A/D Result=40 11:06:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:19 Get A/D filter: -9.255963e+061 result=40 11:06:19 Get A/D value=-858993460 result=40 11:06:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:19 Aux= 11:06:19 Message to Camera, serial 49276 queued 11:06:56 Received message from Master: op=PointingHead serial=49289 11:06:56 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:06:56 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:06:56 Point started: ret=0 11:06:56 point_skyscan result=0 11:06:57 Check angles 11:06:57 SkyScan query 11:06:57 SkyScan query done: ret=0 az=135.66<-9044 ze=-6.51<-12434 Statuses=0009 0008 11:06:57 Msec=0 True Az=135.66 Ze=-6.51 Az status=0009 Ze status=0008 11:06:58 Check angles 11:06:58 SkyScan query 11:06:58 SkyScan query done: ret=0 az=153.195<-10213 ze=-6.495<-12433 Statuses=0009 0008 11:06:58 Msec=750 True Az=153.195 Ze=-6.495 Az status=0009 Ze status=0008 11:06:58 Check angles 11:06:58 SkyScan query 11:06:59 SkyScan query done: ret=0 az=170.685<-11379 ze=-6.495<-12433 Statuses=0009 0008 11:06:59 Msec=1500 True Az=170.685 Ze=-6.495 Az status=0009 Ze status=0008 11:06:59 Check angles 11:06:59 SkyScan query 11:07:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:07:00 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:07:00 Message to Master queued w/err=0: serial=49289 error=0 11:07:05 Received message from Master: op=Filter serial=49290 11:07:05 Color wheel filter change from 0 to 0 11:07:05 FLIGetFilterPos err=0 currentPosition=0 11:07:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:05 Filter is already there-color wheel unchanged 11:07:05 Received message from Master: op=Shutter serial=49291 11:07:05 Shutter LASER close 11:07:05 Received message from Camera: op=State serial=49293 11:07:05 GetSingleValue result=40 Value=cccccccc 11:07:05 SkyScan query 11:07:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:07:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:06 Parameters OK 11:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:06 Set A/D data flow result=40 11:07:06 Set A/D channel type result=40 11:07:06 Set A/D encoding result=40 11:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:06 Set channel filter=0.000000e+000 result=40 11:07:06 Config A/D Result=40 11:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:06 Get A/D filter: -9.255963e+061 result=40 11:07:06 Get A/D value=-858993460 result=40 11:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:06 Parameters OK 11:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:06 Set A/D data flow result=40 11:07:06 Set A/D channel type result=40 11:07:06 Set A/D encoding result=40 11:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:06 Set channel filter=0.000000e+000 result=40 11:07:06 Config A/D Result=40 11:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:06 Get A/D filter: -9.255963e+061 result=40 11:07:06 Get A/D value=-858993460 result=40 11:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:06 Aux= 11:07:06 Message to Camera, serial 49293 queued 11:07:42 Received message from Master: op=PointingHead serial=49306 11:07:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:07:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:07:43 Point started: ret=0 11:07:43 point_skyscan result=0 11:07:44 Check angles 11:07:44 SkyScan query 11:07:44 SkyScan query done: ret=0 az=152.535<-10169 ze=6.51<-11566 Statuses=0009 0008 11:07:44 Msec=0 True Az=152.535 Ze=6.51 Az status=0009 Ze status=0008 11:07:44 Check angles 11:07:44 SkyScan query 11:07:45 SkyScan query done: ret=0 az=135.015<-9001 ze=6.495<-11567 Statuses=0009 0008 11:07:45 Msec=750 True Az=135.015 Ze=6.495 Az status=0009 Ze status=0008 11:07:45 Check angles 11:07:45 SkyScan query 11:07:46 SkyScan query done: ret=0 az=117.54<-7836 ze=6.495<-11567 Statuses=0009 0008 11:07:46 Msec=1500 True Az=117.54 Ze=6.495 Az status=0009 Ze status=0008 11:07:46 Check angles 11:07:46 SkyScan query 11:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:07:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:07:46 Message to Master queued w/err=0: serial=49306 error=0 11:07:51 Received message from Master: op=Filter serial=49307 11:07:51 Color wheel filter change from 0 to 0 11:07:51 FLIGetFilterPos err=0 currentPosition=0 11:07:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:51 Filter is already there-color wheel unchanged 11:07:52 Received message from Master: op=Shutter serial=49308 11:07:52 Shutter LASER close 11:07:52 Received message from Camera: op=State serial=49310 11:07:52 GetSingleValue result=40 Value=cccccccc 11:07:52 SkyScan query 11:07:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:07:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:52 Parameters OK 11:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:52 Set A/D data flow result=40 11:07:52 Set A/D channel type result=40 11:07:52 Set A/D encoding result=40 11:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:52 Set channel filter=0.000000e+000 result=40 11:07:52 Config A/D Result=40 11:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:52 Get A/D filter: -9.255963e+061 result=40 11:07:52 Get A/D value=-858993460 result=40 11:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:52 Parameters OK 11:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:52 Set A/D data flow result=40 11:07:52 Set A/D channel type result=40 11:07:52 Set A/D encoding result=40 11:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:52 Set channel filter=0.000000e+000 result=40 11:07:52 Config A/D Result=40 11:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:52 Get A/D filter: -9.255963e+061 result=40 11:07:52 Get A/D value=-858993460 result=40 11:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:52 Aux= 11:07:52 Message to Camera, serial 49310 queued 11:08:29 Received message from Master: op=PointingHead serial=49323 11:08:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:08:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:08:29 Point started: ret=0 11:08:29 point_skyscan result=0 11:08:30 Check angles 11:08:30 SkyScan query 11:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 11:08:31 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 11:08:31 Check angles 11:08:31 SkyScan query 11:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.175<-14945 Statuses=0008 0009 11:08:31 Msec=750 True Az=112.995 Ze=-44.175 Az status=0008 Ze status=0009 11:08:32 Check angles 11:08:32 SkyScan query 11:08:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 11:08:32 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 11:08:32 Check angles 11:08:32 SkyScan query 11:08:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.925<-17795 Statuses=0008 0009 11:08:33 Msec=2250 True Az=112.995 Ze=-86.925 Az status=0008 Ze status=0009 11:08:33 Check angles 11:08:33 SkyScan query 11:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 11:08:34 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 11:08:34 Check angles 11:08:34 SkyScan query 11:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 11:08:34 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 11:08:35 Check angles 11:08:35 SkyScan query 11:08:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.775<-21985 Statuses=0008 0009 11:08:35 Msec=4500 True Az=112.995 Ze=-149.775 Az status=0008 Ze status=0009 11:08:35 Check angles 11:08:35 SkyScan query 11:08:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.685<-23379 Statuses=0008 0009 11:08:36 Msec=5250 True Az=112.995 Ze=-170.685 Az status=0008 Ze status=0009 11:08:36 Check angles 11:08:36 SkyScan query 11:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:08:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:08:37 Message to Master queued w/err=0: serial=49323 error=0 11:08:42 Received message from Master: op=Filter serial=49324 11:08:42 Color wheel filter change from 0 to 0 11:08:42 FLIGetFilterPos err=0 currentPosition=0 11:08:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:42 Filter is already there-color wheel unchanged 11:08:42 Received message from Master: op=Shutter serial=49325 11:08:42 Shutter LASER open 11:08:42 Received message from Camera: op=State serial=49327 11:08:42 GetSingleValue result=40 Value=cccccccc 11:08:42 SkyScan query 11:08:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:08:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:43 Parameters OK 11:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:43 Set A/D data flow result=40 11:08:43 Set A/D channel type result=40 11:08:43 Set A/D encoding result=40 11:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:43 Set channel filter=0.000000e+000 result=40 11:08:43 Config A/D Result=40 11:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:43 Get A/D filter: -9.255963e+061 result=40 11:08:43 Get A/D value=-858993460 result=40 11:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:43 Parameters OK 11:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:43 Set A/D data flow result=40 11:08:43 Set A/D channel type result=40 11:08:43 Set A/D encoding result=40 11:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:43 Set channel filter=0.000000e+000 result=40 11:08:43 Config A/D Result=40 11:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:43 Get A/D filter: -9.255963e+061 result=40 11:08:43 Get A/D value=-858993460 result=40 11:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:43 Aux= 11:08:43 Message to Camera, serial 49327 queued 11:08:51 Received message from Master: op=Shutter serial=49337 11:08:51 Shutter LASER close 11:08:52 Received message from Master: op=PointingHead serial=49341 11:08:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:08:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:08:52 Point started: ret=0 11:08:52 point_skyscan result=0 11:08:53 Check angles 11:08:53 SkyScan query 11:08:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 11:08:53 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 11:08:53 Check angles 11:08:53 SkyScan query 11:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 11:08:54 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 11:08:54 Check angles 11:08:54 SkyScan query 11:08:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 11:08:55 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 11:08:55 Check angles 11:08:55 SkyScan query 11:08:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 11:08:55 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 11:08:56 Check angles 11:08:56 SkyScan query 11:08:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 11:08:56 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 11:08:56 Check angles 11:08:56 SkyScan query 11:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 11:08:57 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 11:08:57 Check angles 11:08:57 SkyScan query 11:08:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.31<-13154 Statuses=0008 0009 11:08:58 Msec=4500 True Az=112.995 Ze=-17.31 Az status=0008 Ze status=0009 11:08:58 Check angles 11:08:58 SkyScan query 11:08:58 SkyScan query done: ret=0 az=112.995<-7533 ze=3.66<-11756 Statuses=0008 0009 11:08:58 Msec=5250 True Az=112.995 Ze=3.66 Az status=0008 Ze status=0009 11:08:59 Check angles 11:08:59 SkyScan query 11:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:08:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:08:59 Message to Master queued w/err=0: serial=49341 error=0 11:09:04 Received message from Master: op=Filter serial=49342 11:09:04 Color wheel filter change from 0 to 0 11:09:04 FLIGetFilterPos err=0 currentPosition=0 11:09:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:04 Filter is already there-color wheel unchanged 11:09:04 Received message from Master: op=Shutter serial=49343 11:09:04 Shutter LASER close 11:09:05 Received message from Camera: op=State serial=49345 11:09:05 GetSingleValue result=40 Value=cccccccc 11:09:05 SkyScan query 11:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:09:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:05 Parameters OK 11:09:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:05 Set A/D data flow result=40 11:09:05 Set A/D channel type result=40 11:09:05 Set A/D encoding result=40 11:09:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:05 Set channel filter=0.000000e+000 result=40 11:09:05 Config A/D Result=40 11:09:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:05 Get A/D filter: -9.255963e+061 result=40 11:09:05 Get A/D value=-858993460 result=40 11:09:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:05 Parameters OK 11:09:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:05 Set A/D data flow result=40 11:09:05 Set A/D channel type result=40 11:09:05 Set A/D encoding result=40 11:09:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:05 Set channel filter=0.000000e+000 result=40 11:09:05 Config A/D Result=40 11:09:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:05 Get A/D filter: -9.255963e+061 result=40 11:09:05 Get A/D value=-858993460 result=40 11:09:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:05 Aux= 11:09:05 Message to Camera, serial 49345 queued 11:09:42 Received message from Master: op=PointingHead serial=49358 11:09:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:09:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:09:42 Point started: ret=0 11:09:42 point_skyscan result=0 11:09:43 Check angles 11:09:43 SkyScan query 11:09:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:09:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:09:44 Message to Master queued w/err=0: serial=49358 error=0 11:09:49 Received message from Master: op=Filter serial=49359 11:09:49 Color wheel filter change from 0 to 0 11:09:49 FLIGetFilterPos err=0 currentPosition=0 11:09:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:49 Filter is already there-color wheel unchanged 11:09:49 Received message from Master: op=Shutter serial=49360 11:09:49 Shutter LASER close 11:09:49 Received message from Camera: op=State serial=49362 11:09:49 GetSingleValue result=40 Value=cccccccc 11:09:49 SkyScan query 11:09:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:09:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:49 Parameters OK 11:09:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:49 Set A/D data flow result=40 11:09:49 Set A/D channel type result=40 11:09:49 Set A/D encoding result=40 11:09:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:49 Set channel filter=0.000000e+000 result=40 11:09:49 Config A/D Result=40 11:09:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:49 Get A/D filter: -9.255963e+061 result=40 11:09:49 Get A/D value=-858993460 result=40 11:09:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:49 Parameters OK 11:09:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:49 Set A/D data flow result=40 11:09:49 Set A/D channel type result=40 11:09:49 Set A/D encoding result=40 11:09:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:49 Set channel filter=0.000000e+000 result=40 11:09:49 Config A/D Result=40 11:09:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:49 Get A/D filter: -9.255963e+061 result=40 11:09:49 Get A/D value=-858993460 result=40 11:09:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:49 Aux= 11:09:49 Message to Camera, serial 49362 queued 11:10:26 Received message from Master: op=PointingHead serial=49375 11:10:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:10:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:10:27 Point started: ret=0 11:10:27 point_skyscan result=0 11:10:27 Check angles 11:10:27 SkyScan query 11:10:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:10:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:10:28 Message to Master queued w/err=0: serial=49375 error=0 11:10:33 Received message from Master: op=Filter serial=49376 11:10:33 Color wheel filter change from 0 to 0 11:10:33 FLIGetFilterPos err=0 currentPosition=0 11:10:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:10:33 Filter is already there-color wheel unchanged 11:10:33 Received message from Master: op=Shutter serial=49377 11:10:33 Shutter LASER close 11:10:33 Received message from Camera: op=State serial=49379 11:10:33 GetSingleValue result=40 Value=cccccccc 11:10:33 SkyScan query 11:10:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:10:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:34 Parameters OK 11:10:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:34 Set A/D data flow result=40 11:10:34 Set A/D channel type result=40 11:10:34 Set A/D encoding result=40 11:10:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:34 Set channel filter=0.000000e+000 result=40 11:10:34 Config A/D Result=40 11:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:34 Get A/D filter: -9.255963e+061 result=40 11:10:34 Get A/D value=-858993460 result=40 11:10:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:34 Parameters OK 11:10:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:34 Set A/D data flow result=40 11:10:34 Set A/D channel type result=40 11:10:34 Set A/D encoding result=40 11:10:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:34 Set channel filter=0.000000e+000 result=40 11:10:34 Config A/D Result=40 11:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:34 Get A/D filter: -9.255963e+061 result=40 11:10:34 Get A/D value=-858993460 result=40 11:10:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:10:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:10:34 Aux= 11:10:34 Message to Camera, serial 49379 queued 11:11:11 Received message from Master: op=PointingHead serial=49392 11:11:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:11:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:11:11 Point started: ret=0 11:11:11 point_skyscan result=0 11:11:12 Check angles 11:11:12 SkyScan query 11:11:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:11:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:11:12 Message to Master queued w/err=0: serial=49392 error=0 11:11:17 Received message from Master: op=Filter serial=49393 11:11:17 Color wheel filter change from 0 to 0 11:11:17 FLIGetFilterPos err=0 currentPosition=0 11:11:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:17 Filter is already there-color wheel unchanged 11:11:17 Received message from Master: op=Shutter serial=49394 11:11:17 Shutter LASER close 11:11:17 Received message from Camera: op=State serial=49396 11:11:17 GetSingleValue result=40 Value=cccccccc 11:11:17 SkyScan query 11:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:11:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:18 Parameters OK 11:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:18 Set A/D data flow result=40 11:11:18 Set A/D channel type result=40 11:11:18 Set A/D encoding result=40 11:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:18 Set channel filter=0.000000e+000 result=40 11:11:18 Config A/D Result=40 11:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:18 Get A/D filter: -9.255963e+061 result=40 11:11:18 Get A/D value=-858993460 result=40 11:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:18 Parameters OK 11:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:18 Set A/D data flow result=40 11:11:18 Set A/D channel type result=40 11:11:18 Set A/D encoding result=40 11:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:18 Set channel filter=0.000000e+000 result=40 11:11:18 Config A/D Result=40 11:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:18 Get A/D filter: -9.255963e+061 result=40 11:11:18 Get A/D value=-858993460 result=40 11:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:18 Aux= 11:11:18 Message to Camera, serial 49396 queued 11:11:55 Received message from Master: op=PointingHead serial=49409 11:11:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:11:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:11:55 Point started: ret=0 11:11:55 point_skyscan result=0 11:11:56 Check angles 11:11:56 SkyScan query 11:11:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 11:11:56 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 11:11:57 Check angles 11:11:57 SkyScan query 11:11:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 11:11:57 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 11:11:57 Check angles 11:11:57 SkyScan query 11:11:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.43<-16362 Statuses=0008 0009 11:11:58 Msec=1500 True Az=112.995 Ze=-65.43 Az status=0008 Ze status=0009 11:11:58 Check angles 11:11:58 SkyScan query 11:11:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.385<-17759 Statuses=0008 0009 11:11:59 Msec=2250 True Az=112.995 Ze=-86.385 Az status=0008 Ze status=0009 11:11:59 Check angles 11:11:59 SkyScan query 11:11:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.34<-19156 Statuses=0008 0009 11:11:59 Msec=3000 True Az=112.995 Ze=-107.34 Az status=0008 Ze status=0009 11:12:00 Check angles 11:12:00 SkyScan query 11:12:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.28<-20552 Statuses=0008 0009 11:12:00 Msec=3750 True Az=112.995 Ze=-128.28 Az status=0008 Ze status=0009 11:12:00 Check angles 11:12:00 SkyScan query 11:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.67<-21978 Statuses=0008 0009 11:12:01 Msec=4500 True Az=112.995 Ze=-149.67 Az status=0008 Ze status=0009 11:12:01 Check angles 11:12:01 SkyScan query 11:12:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 11:12:02 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 11:12:02 Check angles 11:12:02 SkyScan query 11:12:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:12:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:12:03 Message to Master queued w/err=0: serial=49409 error=0 11:12:08 Received message from Master: op=Filter serial=49410 11:12:08 Color wheel filter change from 0 to 0 11:12:08 FLIGetFilterPos err=0 currentPosition=0 11:12:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:08 Filter is already there-color wheel unchanged 11:12:08 Received message from Master: op=Shutter serial=49411 11:12:08 Shutter LASER open 11:12:08 Received message from Camera: op=State serial=49413 11:12:08 GetSingleValue result=40 Value=cccccccc 11:12:08 SkyScan query 11:12:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:12:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:08 Parameters OK 11:12:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:08 Set A/D data flow result=40 11:12:08 Set A/D channel type result=40 11:12:08 Set A/D encoding result=40 11:12:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:08 Set channel filter=0.000000e+000 result=40 11:12:08 Config A/D Result=40 11:12:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:08 Get A/D filter: -9.255963e+061 result=40 11:12:08 Get A/D value=-858993460 result=40 11:12:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:08 Parameters OK 11:12:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:08 Set A/D data flow result=40 11:12:08 Set A/D channel type result=40 11:12:08 Set A/D encoding result=40 11:12:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:08 Set channel filter=0.000000e+000 result=40 11:12:08 Config A/D Result=40 11:12:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:08 Get A/D filter: -9.255963e+061 result=40 11:12:08 Get A/D value=-858993460 result=40 11:12:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:08 Aux= 11:12:08 Message to Camera, serial 49413 queued 11:12:17 Received message from Master: op=Shutter serial=49423 11:12:17 Shutter LASER close 11:12:17 Received message from Master: op=PointingHead serial=49427 11:12:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:12:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:12:18 Point started: ret=0 11:12:18 point_skyscan result=0 11:12:19 Check angles 11:12:19 SkyScan query 11:12:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 11:12:19 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 11:12:19 Check angles 11:12:19 SkyScan query 11:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.01<-20134 Statuses=0008 0009 11:12:20 Msec=750 True Az=112.995 Ze=-122.01 Az status=0008 Ze status=0009 11:12:20 Check angles 11:12:20 SkyScan query 11:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 11:12:21 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 11:12:21 Check angles 11:12:21 SkyScan query 11:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 11:12:21 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 11:12:22 Check angles 11:12:22 SkyScan query 11:12:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.755<-15917 Statuses=0008 0009 11:12:22 Msec=3000 True Az=112.995 Ze=-58.755 Az status=0008 Ze status=0009 11:12:22 Check angles 11:12:22 SkyScan query 11:12:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.35<-14490 Statuses=0008 0009 11:12:23 Msec=3750 True Az=112.995 Ze=-37.35 Az status=0008 Ze status=0009 11:12:23 Check angles 11:12:23 SkyScan query 11:12:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.35<-13090 Statuses=0008 0009 11:12:24 Msec=4500 True Az=112.995 Ze=-16.35 Az status=0008 Ze status=0009 11:12:24 Check angles 11:12:24 SkyScan query 11:12:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 11:12:24 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 11:12:25 Check angles 11:12:25 SkyScan query 11:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:12:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:12:25 Message to Master queued w/err=0: serial=49427 error=0 11:12:30 Received message from Master: op=Filter serial=49428 11:12:30 Color wheel filter change from 0 to 0 11:12:30 FLIGetFilterPos err=0 currentPosition=0 11:12:30 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:30 Filter is already there-color wheel unchanged 11:12:30 Received message from Master: op=Shutter serial=49429 11:12:30 Shutter LASER close 11:12:31 Received message from Camera: op=State serial=49431 11:12:31 GetSingleValue result=40 Value=cccccccc 11:12:31 SkyScan query 11:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:12:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:31 Parameters OK 11:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:31 Set A/D data flow result=40 11:12:31 Set A/D channel type result=40 11:12:31 Set A/D encoding result=40 11:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:31 Set channel filter=0.000000e+000 result=40 11:12:31 Config A/D Result=40 11:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:31 Get A/D filter: -9.255963e+061 result=40 11:12:31 Get A/D value=-858993460 result=40 11:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:31 Parameters OK 11:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:31 Set A/D data flow result=40 11:12:31 Set A/D channel type result=40 11:12:31 Set A/D encoding result=40 11:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:31 Set channel filter=0.000000e+000 result=40 11:12:31 Config A/D Result=40 11:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:31 Get A/D filter: -9.255963e+061 result=40 11:12:31 Get A/D value=-858993460 result=40 11:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:31 Aux= 11:12:31 Message to Camera, serial 49431 queued 11:13:08 Received message from Master: op=PointingHead serial=49444 11:13:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:13:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:13:08 Point started: ret=0 11:13:08 point_skyscan result=0 11:13:09 Check angles 11:13:09 SkyScan query 11:13:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:13:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:13:10 Message to Master queued w/err=0: serial=49444 error=0 11:13:15 Received message from Master: op=Filter serial=49445 11:13:15 Color wheel filter change from 0 to 0 11:13:15 FLIGetFilterPos err=0 currentPosition=0 11:13:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:15 Filter is already there-color wheel unchanged 11:13:15 Received message from Master: op=Shutter serial=49446 11:13:15 Shutter LASER close 11:13:15 Received message from Camera: op=State serial=49448 11:13:15 GetSingleValue result=40 Value=cccccccc 11:13:15 SkyScan query 11:13:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:13:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:15 Parameters OK 11:13:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:15 Set A/D data flow result=40 11:13:15 Set A/D channel type result=40 11:13:15 Set A/D encoding result=40 11:13:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:15 Set channel filter=0.000000e+000 result=40 11:13:15 Config A/D Result=40 11:13:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:15 Get A/D filter: -9.255963e+061 result=40 11:13:15 Get A/D value=-858993460 result=40 11:13:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:15 Parameters OK 11:13:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:15 Set A/D data flow result=40 11:13:15 Set A/D channel type result=40 11:13:15 Set A/D encoding result=40 11:13:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:15 Set channel filter=0.000000e+000 result=40 11:13:15 Config A/D Result=40 11:13:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:15 Get A/D filter: -9.255963e+061 result=40 11:13:15 Get A/D value=-858993460 result=40 11:13:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:15 Aux= 11:13:15 Message to Camera, serial 49448 queued 11:13:52 Received message from Master: op=PointingHead serial=49461 11:13:52 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:13:52 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:13:53 Point started: ret=0 11:13:53 point_skyscan result=0 11:13:53 Check angles 11:13:53 SkyScan query 11:13:54 SkyScan query done: ret=0 az=135.69<-9046 ze=-6.51<-12434 Statuses=0009 0008 11:13:54 Msec=0 True Az=135.69 Ze=-6.51 Az status=0009 Ze status=0008 11:13:54 Check angles 11:13:54 SkyScan query 11:13:55 SkyScan query done: ret=0 az=153.315<-10221 ze=-6.495<-12433 Statuses=0009 0008 11:13:55 Msec=750 True Az=153.315 Ze=-6.495 Az status=0009 Ze status=0008 11:13:55 Check angles 11:13:55 SkyScan query 11:13:55 SkyScan query done: ret=0 az=171.015<-11401 ze=-6.495<-12433 Statuses=0009 0008 11:13:55 Msec=1500 True Az=171.015 Ze=-6.495 Az status=0009 Ze status=0008 11:13:56 Check angles 11:13:56 SkyScan query 11:13:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:13:56 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:13:56 Message to Master queued w/err=0: serial=49461 error=0 11:14:01 Received message from Master: op=Filter serial=49462 11:14:01 Color wheel filter change from 0 to 0 11:14:01 FLIGetFilterPos err=0 currentPosition=0 11:14:01 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:01 Filter is already there-color wheel unchanged 11:14:01 Received message from Master: op=Shutter serial=49463 11:14:01 Shutter LASER close 11:14:01 Received message from Camera: op=State serial=49465 11:14:01 GetSingleValue result=40 Value=cccccccc 11:14:01 SkyScan query 11:14:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:14:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:02 Parameters OK 11:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:02 Set A/D data flow result=40 11:14:02 Set A/D channel type result=40 11:14:02 Set A/D encoding result=40 11:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:02 Set channel filter=0.000000e+000 result=40 11:14:02 Config A/D Result=40 11:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:02 Get A/D filter: -9.255963e+061 result=40 11:14:02 Get A/D value=-858993460 result=40 11:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:02 Parameters OK 11:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:02 Set A/D data flow result=40 11:14:02 Set A/D channel type result=40 11:14:02 Set A/D encoding result=40 11:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:02 Set channel filter=0.000000e+000 result=40 11:14:02 Config A/D Result=40 11:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:02 Get A/D filter: -9.255963e+061 result=40 11:14:02 Get A/D value=-858993460 result=40 11:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:02 Aux= 11:14:02 Message to Camera, serial 49465 queued [UTC 2019-3-1 11:14:39] 11:14:39 Received message from Master: op=PointingHead serial=49478 11:14:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:14:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:14:39 Point started: ret=0 11:14:39 point_skyscan result=0 11:14:40 Check angles 11:14:40 SkyScan query 11:14:41 SkyScan query done: ret=0 az=152.925<-10195 ze=6.51<-11566 Statuses=0009 0008 11:14:41 Msec=0 True Az=152.925 Ze=6.51 Az status=0009 Ze status=0008 11:14:41 Check angles 11:14:41 SkyScan query 11:14:41 SkyScan query done: ret=0 az=135.495<-9033 ze=6.495<-11567 Statuses=0009 0008 11:14:41 Msec=750 True Az=135.495 Ze=6.495 Az status=0009 Ze status=0008 11:14:42 Check angles 11:14:42 SkyScan query 11:14:42 SkyScan query done: ret=0 az=117.975<-7865 ze=6.495<-11567 Statuses=0009 0008 11:14:42 Msec=1500 True Az=117.975 Ze=6.495 Az status=0009 Ze status=0008 11:14:42 Check angles 11:14:42 SkyScan query 11:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:14:43 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:14:43 Message to Master queued w/err=0: serial=49478 error=0 11:14:48 Received message from Master: op=Filter serial=49479 11:14:48 Color wheel filter change from 0 to 0 11:14:48 FLIGetFilterPos err=0 currentPosition=0 11:14:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:48 Filter is already there-color wheel unchanged 11:14:48 Received message from Master: op=Shutter serial=49480 11:14:48 Shutter LASER close 11:14:48 Received message from Camera: op=State serial=49482 11:14:48 GetSingleValue result=40 Value=cccccccc 11:14:48 SkyScan query 11:14:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:14:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:49 Parameters OK 11:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:49 Set A/D data flow result=40 11:14:49 Set A/D channel type result=40 11:14:49 Set A/D encoding result=40 11:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:49 Set channel filter=0.000000e+000 result=40 11:14:49 Config A/D Result=40 11:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:49 Get A/D filter: -9.255963e+061 result=40 11:14:49 Get A/D value=-858993460 result=40 11:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:49 Parameters OK 11:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:49 Set A/D data flow result=40 11:14:49 Set A/D channel type result=40 11:14:49 Set A/D encoding result=40 11:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:49 Set channel filter=0.000000e+000 result=40 11:14:49 Config A/D Result=40 11:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:49 Get A/D filter: -9.255963e+061 result=40 11:14:49 Get A/D value=-858993460 result=40 11:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:49 Aux= 11:14:49 Message to Camera, serial 49482 queued 11:15:25 Received message from Master: op=PointingHead serial=49495 11:15:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:15:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:15:26 Point started: ret=0 11:15:26 point_skyscan result=0 11:15:27 Check angles 11:15:27 SkyScan query 11:15:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 11:15:27 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 11:15:27 Check angles 11:15:27 SkyScan query 11:15:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.03<-15002 Statuses=0008 0009 11:15:28 Msec=750 True Az=112.995 Ze=-45.03 Az status=0008 Ze status=0009 11:15:28 Check angles 11:15:28 SkyScan query 11:15:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.97<-16398 Statuses=0008 0009 11:15:29 Msec=1500 True Az=112.995 Ze=-65.97 Az status=0008 Ze status=0009 11:15:29 Check angles 11:15:29 SkyScan query 11:15:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.925<-17795 Statuses=0008 0009 11:15:29 Msec=2250 True Az=112.995 Ze=-86.925 Az status=0008 Ze status=0009 11:15:30 Check angles 11:15:30 SkyScan query 11:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.315<-19221 Statuses=0008 0009 11:15:30 Msec=3000 True Az=112.995 Ze=-108.315 Az status=0008 Ze status=0009 11:15:30 Check angles 11:15:30 SkyScan query 11:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.27<-20618 Statuses=0008 0009 11:15:31 Msec=3750 True Az=112.995 Ze=-129.27 Az status=0008 Ze status=0009 11:15:31 Check angles 11:15:31 SkyScan query 11:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.225<-22015 Statuses=0008 0009 11:15:32 Msec=4500 True Az=112.995 Ze=-150.225 Az status=0008 Ze status=0009 11:15:32 Check angles 11:15:32 SkyScan query 11:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.03<-23402 Statuses=0008 0009 11:15:32 Msec=5250 True Az=112.995 Ze=-171.03 Az status=0008 Ze status=0009 11:15:33 Check angles 11:15:33 SkyScan query 11:15:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:15:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:15:33 Message to Master queued w/err=0: serial=49495 error=0 11:15:38 Received message from Master: op=Filter serial=49496 11:15:38 Color wheel filter change from 0 to 0 11:15:38 FLIGetFilterPos err=0 currentPosition=0 11:15:38 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:38 Filter is already there-color wheel unchanged 11:15:38 Received message from Master: op=Shutter serial=49497 11:15:38 Shutter LASER open 11:15:39 Received message from Camera: op=State serial=49499 11:15:39 GetSingleValue result=40 Value=cccccccc 11:15:39 SkyScan query 11:15:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:15:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:39 Parameters OK 11:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:39 Set A/D data flow result=40 11:15:39 Set A/D channel type result=40 11:15:39 Set A/D encoding result=40 11:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:39 Set channel filter=0.000000e+000 result=40 11:15:39 Config A/D Result=40 11:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:39 Get A/D filter: -9.255963e+061 result=40 11:15:39 Get A/D value=-858993460 result=40 11:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:39 Parameters OK 11:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:39 Set A/D data flow result=40 11:15:39 Set A/D channel type result=40 11:15:39 Set A/D encoding result=40 11:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:39 Set channel filter=0.000000e+000 result=40 11:15:39 Config A/D Result=40 11:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:39 Get A/D filter: -9.255963e+061 result=40 11:15:39 Get A/D value=-858993460 result=40 11:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:39 Aux= 11:15:39 Message to Camera, serial 49499 queued 11:15:48 Received message from Master: op=Shutter serial=49509 11:15:48 Shutter LASER close 11:15:48 Received message from Master: op=PointingHead serial=49513 11:15:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:15:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:15:48 Point started: ret=0 11:15:48 point_skyscan result=0 11:15:49 Check angles 11:15:49 SkyScan query 11:15:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 11:15:50 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 11:15:50 Check angles 11:15:50 SkyScan query 11:15:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.58<-20172 Statuses=0008 0009 11:15:50 Msec=750 True Az=112.995 Ze=-122.58 Az status=0008 Ze status=0009 11:15:51 Check angles 11:15:51 SkyScan query 11:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.595<-18773 Statuses=0008 0009 11:15:51 Msec=1500 True Az=112.995 Ze=-101.595 Az status=0008 Ze status=0009 11:15:51 Check angles 11:15:51 SkyScan query 11:15:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.64<-17376 Statuses=0008 0009 11:15:52 Msec=2250 True Az=112.995 Ze=-80.64 Az status=0008 Ze status=0009 11:15:52 Check angles 11:15:52 SkyScan query 11:15:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.685<-15979 Statuses=0008 0009 11:15:53 Msec=3000 True Az=112.995 Ze=-59.685 Az status=0008 Ze status=0009 11:15:53 Check angles 11:15:53 SkyScan query 11:15:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.73<-14582 Statuses=0008 0009 11:15:53 Msec=3750 True Az=112.995 Ze=-38.73 Az status=0008 Ze status=0009 11:15:54 Check angles 11:15:54 SkyScan query 11:15:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.775<-13185 Statuses=0008 0009 11:15:54 Msec=4500 True Az=112.995 Ze=-17.775 Az status=0008 Ze status=0009 11:15:54 Check angles 11:15:54 SkyScan query 11:15:55 SkyScan query done: ret=0 az=112.995<-7533 ze=3.18<-11788 Statuses=0008 0009 11:15:55 Msec=5250 True Az=112.995 Ze=3.18 Az status=0008 Ze status=0009 11:15:55 Check angles 11:15:55 SkyScan query 11:15:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:15:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:15:56 Message to Master queued w/err=0: serial=49513 error=0 11:16:01 Received message from Master: op=Filter serial=49514 11:16:01 Color wheel filter change from 0 to 0 11:16:01 FLIGetFilterPos err=0 currentPosition=0 11:16:01 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:01 Filter is already there-color wheel unchanged 11:16:01 Received message from Master: op=Shutter serial=49515 11:16:01 Shutter LASER close 11:16:01 Received message from Camera: op=State serial=49517 11:16:01 GetSingleValue result=40 Value=cccccccc 11:16:01 SkyScan query 11:16:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:16:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:02 Parameters OK 11:16:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:02 Set A/D data flow result=40 11:16:02 Set A/D channel type result=40 11:16:02 Set A/D encoding result=40 11:16:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:02 Set channel filter=0.000000e+000 result=40 11:16:02 Config A/D Result=40 11:16:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:02 Get A/D filter: -9.255963e+061 result=40 11:16:02 Get A/D value=-858993460 result=40 11:16:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:02 Parameters OK 11:16:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:02 Set A/D data flow result=40 11:16:02 Set A/D channel type result=40 11:16:02 Set A/D encoding result=40 11:16:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:02 Set channel filter=0.000000e+000 result=40 11:16:02 Config A/D Result=40 11:16:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:02 Get A/D filter: -9.255963e+061 result=40 11:16:02 Get A/D value=-858993460 result=40 11:16:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:02 Aux= 11:16:02 Message to Camera, serial 49517 queued 11:16:38 Received message from Master: op=PointingHead serial=49530 11:16:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:16:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:16:39 Point started: ret=0 11:16:39 point_skyscan result=0 11:16:39 Check angles 11:16:39 SkyScan query 11:16:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:16:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:16:40 Message to Master queued w/err=0: serial=49530 error=0 11:16:45 Received message from Master: op=Filter serial=49531 11:16:45 Color wheel filter change from 0 to 0 11:16:45 FLIGetFilterPos err=0 currentPosition=0 11:16:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:45 Filter is already there-color wheel unchanged 11:16:45 Received message from Master: op=Shutter serial=49532 11:16:45 Shutter LASER close 11:16:45 Received message from Camera: op=State serial=49534 11:16:45 GetSingleValue result=40 Value=cccccccc 11:16:45 SkyScan query 11:16:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:16:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:46 Parameters OK 11:16:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:46 Set A/D data flow result=40 11:16:46 Set A/D channel type result=40 11:16:46 Set A/D encoding result=40 11:16:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:46 Set channel filter=0.000000e+000 result=40 11:16:46 Config A/D Result=40 11:16:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:46 Get A/D filter: -9.255963e+061 result=40 11:16:46 Get A/D value=-858993460 result=40 11:16:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:46 Parameters OK 11:16:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:46 Set A/D data flow result=40 11:16:46 Set A/D channel type result=40 11:16:46 Set A/D encoding result=40 11:16:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:46 Set channel filter=0.000000e+000 result=40 11:16:46 Config A/D Result=40 11:16:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:46 Get A/D filter: -9.255963e+061 result=40 11:16:46 Get A/D value=-858993460 result=40 11:16:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:46 Aux= 11:16:46 Message to Camera, serial 49534 queued 11:17:23 Received message from Master: op=PointingHead serial=49547 11:17:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:17:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:17:23 Point started: ret=0 11:17:23 point_skyscan result=0 11:17:24 Check angles 11:17:24 SkyScan query 11:17:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:17:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:17:24 Message to Master queued w/err=0: serial=49547 error=0 11:17:29 Received message from Master: op=Filter serial=49548 11:17:29 Color wheel filter change from 0 to 0 11:17:29 FLIGetFilterPos err=0 currentPosition=0 11:17:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:29 Filter is already there-color wheel unchanged 11:17:30 Received message from Master: op=Shutter serial=49549 11:17:30 Shutter LASER close 11:17:30 Received message from Camera: op=State serial=49551 11:17:30 GetSingleValue result=40 Value=cccccccc 11:17:30 SkyScan query 11:17:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:17:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:30 Parameters OK 11:17:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:30 Set A/D data flow result=40 11:17:30 Set A/D channel type result=40 11:17:30 Set A/D encoding result=40 11:17:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:30 Set channel filter=0.000000e+000 result=40 11:17:30 Config A/D Result=40 11:17:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:30 Get A/D filter: -9.255963e+061 result=40 11:17:30 Get A/D value=-858993460 result=40 11:17:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:30 Parameters OK 11:17:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:30 Set A/D data flow result=40 11:17:30 Set A/D channel type result=40 11:17:30 Set A/D encoding result=40 11:17:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:30 Set channel filter=0.000000e+000 result=40 11:17:30 Config A/D Result=40 11:17:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:30 Get A/D filter: -9.255963e+061 result=40 11:17:30 Get A/D value=-858993460 result=40 11:17:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:30 Aux= 11:17:30 Message to Camera, serial 49551 queued 11:18:07 Received message from Master: op=PointingHead serial=49564 11:18:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:18:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:18:07 Point started: ret=0 11:18:07 point_skyscan result=0 11:18:08 Check angles 11:18:08 SkyScan query 11:18:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:18:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:18:09 Message to Master queued w/err=0: serial=49564 error=0 11:18:14 Received message from Master: op=Filter serial=49565 11:18:14 Color wheel filter change from 0 to 0 11:18:14 FLIGetFilterPos err=0 currentPosition=0 11:18:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:14 Filter is already there-color wheel unchanged 11:18:14 Received message from Master: op=Shutter serial=49566 11:18:14 Shutter LASER close 11:18:14 Received message from Camera: op=State serial=49568 11:18:14 GetSingleValue result=40 Value=cccccccc 11:18:14 SkyScan query 11:18:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:18:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:14 Parameters OK 11:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:14 Set A/D data flow result=40 11:18:14 Set A/D channel type result=40 11:18:14 Set A/D encoding result=40 11:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:14 Set channel filter=0.000000e+000 result=40 11:18:14 Config A/D Result=40 11:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:14 Get A/D filter: -9.255963e+061 result=40 11:18:14 Get A/D value=-858993460 result=40 11:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:14 Parameters OK 11:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:14 Set A/D data flow result=40 11:18:14 Set A/D channel type result=40 11:18:14 Set A/D encoding result=40 11:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:14 Set channel filter=0.000000e+000 result=40 11:18:14 Config A/D Result=40 11:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:14 Get A/D filter: -9.255963e+061 result=40 11:18:14 Get A/D value=-858993460 result=40 11:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:14 Aux= 11:18:14 Message to Camera, serial 49568 queued 11:18:51 Received message from Master: op=PointingHead serial=49581 11:18:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:18:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:18:52 Point started: ret=0 11:18:52 point_skyscan result=0 11:18:52 Check angles 11:18:52 SkyScan query 11:18:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 11:18:53 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 11:18:53 Check angles 11:18:53 SkyScan query 11:18:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 11:18:54 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 11:18:54 Check angles 11:18:54 SkyScan query 11:18:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 11:18:55 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 11:18:55 Check angles 11:18:55 SkyScan query 11:18:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 11:18:55 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 11:18:55 Check angles 11:18:55 SkyScan query 11:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.015<-19201 Statuses=0008 0009 11:18:56 Msec=3000 True Az=112.995 Ze=-108.015 Az status=0008 Ze status=0009 11:18:56 Check angles 11:18:56 SkyScan query 11:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 11:18:57 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 11:18:57 Check angles 11:18:57 SkyScan query 11:18:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.91<-21994 Statuses=0008 0009 11:18:58 Msec=4500 True Az=112.995 Ze=-149.91 Az status=0008 Ze status=0009 11:18:58 Check angles 11:18:58 SkyScan query 11:18:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 11:18:58 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 11:18:58 Check angles 11:18:58 SkyScan query 11:18:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:18:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:18:59 Message to Master queued w/err=0: serial=49581 error=0 11:19:04 Received message from Master: op=Filter serial=49582 11:19:04 Color wheel filter change from 0 to 0 11:19:04 FLIGetFilterPos err=0 currentPosition=0 11:19:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:04 Filter is already there-color wheel unchanged 11:19:04 Received message from Master: op=Shutter serial=49583 11:19:04 Shutter LASER open 11:19:04 Received message from Camera: op=State serial=49585 11:19:04 GetSingleValue result=40 Value=cccccccc 11:19:04 SkyScan query 11:19:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:19:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:05 Parameters OK 11:19:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:05 Set A/D data flow result=40 11:19:05 Set A/D channel type result=40 11:19:05 Set A/D encoding result=40 11:19:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:05 Set channel filter=0.000000e+000 result=40 11:19:05 Config A/D Result=40 11:19:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:05 Get A/D filter: -9.255963e+061 result=40 11:19:05 Get A/D value=-858993460 result=40 11:19:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:05 Parameters OK 11:19:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:05 Set A/D data flow result=40 11:19:05 Set A/D channel type result=40 11:19:05 Set A/D encoding result=40 11:19:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:05 Set channel filter=0.000000e+000 result=40 11:19:05 Config A/D Result=40 11:19:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:05 Get A/D filter: -9.255963e+061 result=40 11:19:05 Get A/D value=-858993460 result=40 11:19:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:05 Aux= 11:19:05 Message to Camera, serial 49585 queued 11:19:13 Received message from Master: op=Shutter serial=49595 11:19:13 Shutter LASER close 11:19:14 Received message from Master: op=PointingHead serial=49599 11:19:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:19:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:19:14 Point started: ret=0 11:19:14 point_skyscan result=0 11:19:15 Check angles 11:19:15 SkyScan query 11:19:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 11:19:16 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 11:19:16 Check angles 11:19:16 SkyScan query 11:19:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 11:19:16 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 11:19:17 Check angles 11:19:17 SkyScan query 11:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.28<-18752 Statuses=0008 0009 11:19:17 Msec=1500 True Az=112.995 Ze=-101.28 Az status=0008 Ze status=0009 11:19:17 Check angles 11:19:17 SkyScan query 11:19:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.34<-17356 Statuses=0008 0009 11:19:18 Msec=2250 True Az=112.995 Ze=-80.34 Az status=0008 Ze status=0009 11:19:18 Check angles 11:19:18 SkyScan query 11:19:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.385<-15959 Statuses=0008 0009 11:19:19 Msec=3000 True Az=112.995 Ze=-59.385 Az status=0008 Ze status=0009 11:19:19 Check angles 11:19:19 SkyScan query 11:19:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.415<-14561 Statuses=0008 0009 11:19:19 Msec=3750 True Az=112.995 Ze=-38.415 Az status=0008 Ze status=0009 11:19:20 Check angles 11:19:20 SkyScan query 11:19:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.46<-13164 Statuses=0008 0009 11:19:20 Msec=4500 True Az=112.995 Ze=-17.46 Az status=0008 Ze status=0009 11:19:20 Check angles 11:19:20 SkyScan query 11:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=3.495<-11767 Statuses=0008 0009 11:19:21 Msec=5250 True Az=112.995 Ze=3.495 Az status=0008 Ze status=0009 11:19:21 Check angles 11:19:21 SkyScan query 11:19:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:19:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:19:22 Message to Master queued w/err=0: serial=49599 error=0 11:19:27 Received message from Master: op=Filter serial=49600 11:19:27 Color wheel filter change from 0 to 0 11:19:27 FLIGetFilterPos err=0 currentPosition=0 11:19:27 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:27 Filter is already there-color wheel unchanged 11:19:27 Received message from Master: op=Shutter serial=49601 11:19:27 Shutter LASER close 11:19:27 Received message from Camera: op=State serial=49603 11:19:27 GetSingleValue result=40 Value=cccccccc 11:19:27 SkyScan query 11:19:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:19:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:28 Parameters OK 11:19:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:28 Set A/D data flow result=40 11:19:28 Set A/D channel type result=40 11:19:28 Set A/D encoding result=40 11:19:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:28 Set channel filter=0.000000e+000 result=40 11:19:28 Config A/D Result=40 11:19:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:28 Get A/D filter: -9.255963e+061 result=40 11:19:28 Get A/D value=-858993460 result=40 11:19:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:28 Parameters OK 11:19:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:28 Set A/D data flow result=40 11:19:28 Set A/D channel type result=40 11:19:28 Set A/D encoding result=40 11:19:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:28 Set channel filter=0.000000e+000 result=40 11:19:28 Config A/D Result=40 11:19:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:28 Get A/D filter: -9.255963e+061 result=40 11:19:28 Get A/D value=-858993460 result=40 11:19:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:28 Aux= 11:19:28 Message to Camera, serial 49603 queued 11:20:04 Received message from Master: op=PointingHead serial=49616 11:20:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:20:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:20:05 Point started: ret=0 11:20:05 point_skyscan result=0 11:20:06 Check angles 11:20:06 SkyScan query 11:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:20:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:20:06 Message to Master queued w/err=0: serial=49616 error=0 11:20:11 Received message from Master: op=Filter serial=49617 11:20:11 Color wheel filter change from 0 to 0 11:20:11 FLIGetFilterPos err=0 currentPosition=0 11:20:11 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:11 Filter is already there-color wheel unchanged 11:20:11 Received message from Master: op=Shutter serial=49618 11:20:11 Shutter LASER close 11:20:11 Received message from Camera: op=State serial=49620 11:20:11 GetSingleValue result=40 Value=cccccccc 11:20:11 SkyScan query 11:20:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:20:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:12 Parameters OK 11:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:12 Set A/D data flow result=40 11:20:12 Set A/D channel type result=40 11:20:12 Set A/D encoding result=40 11:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:12 Set channel filter=0.000000e+000 result=40 11:20:12 Config A/D Result=40 11:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:12 Get A/D filter: -9.255963e+061 result=40 11:20:12 Get A/D value=-858993460 result=40 11:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:12 Parameters OK 11:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:12 Set A/D data flow result=40 11:20:12 Set A/D channel type result=40 11:20:12 Set A/D encoding result=40 11:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:12 Set channel filter=0.000000e+000 result=40 11:20:12 Config A/D Result=40 11:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:12 Get A/D filter: -9.255963e+061 result=40 11:20:12 Get A/D value=-858993460 result=40 11:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:12 Aux= 11:20:12 Message to Camera, serial 49620 queued 11:20:49 Received message from Master: op=PointingHead serial=49633 11:20:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:20:49 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:20:49 Point started: ret=0 11:20:49 point_skyscan result=0 11:20:50 Check angles 11:20:50 SkyScan query 11:20:50 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 11:20:50 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 11:20:51 Check angles 11:20:51 SkyScan query 11:20:51 SkyScan query done: ret=0 az=153.57<-10238 ze=-6.495<-12433 Statuses=0009 0008 11:20:51 Msec=750 True Az=153.57 Ze=-6.495 Az status=0009 Ze status=0008 11:20:51 Check angles 11:20:51 SkyScan query 11:20:52 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 11:20:52 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 11:20:52 Check angles 11:20:52 SkyScan query 11:20:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:20:53 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:20:53 Message to Master queued w/err=0: serial=49633 error=0 11:20:58 Received message from Master: op=Filter serial=49634 11:20:58 Color wheel filter change from 0 to 0 11:20:58 FLIGetFilterPos err=0 currentPosition=0 11:20:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:58 Filter is already there-color wheel unchanged 11:20:58 Received message from Master: op=Shutter serial=49635 11:20:58 Shutter LASER close 11:20:58 Received message from Camera: op=State serial=49637 11:20:58 GetSingleValue result=40 Value=cccccccc 11:20:58 SkyScan query 11:20:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:20:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:58 Parameters OK 11:20:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:58 Set A/D data flow result=40 11:20:58 Set A/D channel type result=40 11:20:58 Set A/D encoding result=40 11:20:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:58 Set channel filter=0.000000e+000 result=40 11:20:58 Config A/D Result=40 11:20:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:58 Get A/D filter: -9.255963e+061 result=40 11:20:58 Get A/D value=-858993460 result=40 11:20:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:58 Parameters OK 11:20:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:58 Set A/D data flow result=40 11:20:58 Set A/D channel type result=40 11:20:58 Set A/D encoding result=40 11:20:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:58 Set channel filter=0.000000e+000 result=40 11:20:58 Config A/D Result=40 11:20:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:58 Get A/D filter: -9.255963e+061 result=40 11:20:58 Get A/D value=-858993460 result=40 11:20:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:58 Aux= 11:20:58 Message to Camera, serial 49637 queued 11:21:34 Received message from Master: op=PointingHead serial=49649 11:21:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:21:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:21:35 Point started: ret=0 11:21:35 point_skyscan result=0 11:21:35 Check angles 11:21:35 SkyScan query 11:21:36 SkyScan query done: ret=0 az=152.85<-10190 ze=6.51<-11566 Statuses=0009 0008 11:21:36 Msec=0 True Az=152.85 Ze=6.51 Az status=0009 Ze status=0008 11:21:36 Check angles 11:21:36 SkyScan query 11:21:37 SkyScan query done: ret=0 az=135.27<-9018 ze=6.495<-11567 Statuses=0009 0008 11:21:37 Msec=750 True Az=135.27 Ze=6.495 Az status=0009 Ze status=0008 11:21:37 Check angles 11:21:37 SkyScan query 11:21:38 SkyScan query done: ret=0 az=117.51<-7834 ze=6.495<-11567 Statuses=0009 0008 11:21:38 Msec=1500 True Az=117.51 Ze=6.495 Az status=0009 Ze status=0008 11:21:38 Check angles 11:21:38 SkyScan query 11:21:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:21:38 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:21:38 Message to Master queued w/err=0: serial=49649 error=0 11:21:43 Received message from Master: op=Filter serial=49650 11:21:43 Color wheel filter change from 0 to 0 11:21:43 FLIGetFilterPos err=0 currentPosition=0 11:21:43 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:43 Filter is already there-color wheel unchanged 11:21:43 Received message from Master: op=Shutter serial=49651 11:21:43 Shutter LASER close 11:21:43 Received message from Camera: op=State serial=49653 11:21:43 GetSingleValue result=40 Value=cccccccc 11:21:43 SkyScan query 11:21:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:21:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:44 Parameters OK 11:21:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:44 Set A/D data flow result=40 11:21:44 Set A/D channel type result=40 11:21:44 Set A/D encoding result=40 11:21:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:44 Set channel filter=0.000000e+000 result=40 11:21:44 Config A/D Result=40 11:21:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:44 Get A/D filter: -9.255963e+061 result=40 11:21:44 Get A/D value=-858993460 result=40 11:21:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:44 Parameters OK 11:21:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:44 Set A/D data flow result=40 11:21:44 Set A/D channel type result=40 11:21:44 Set A/D encoding result=40 11:21:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:44 Set channel filter=0.000000e+000 result=40 11:21:44 Config A/D Result=40 11:21:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:44 Get A/D filter: -9.255963e+061 result=40 11:21:44 Get A/D value=-858993460 result=40 11:21:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:44 Aux= 11:21:44 Message to Camera, serial 49653 queued 11:22:21 Received message from Master: op=PointingHead serial=49666 11:22:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:22:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:22:21 Point started: ret=0 11:22:21 point_skyscan result=0 11:22:22 Check angles 11:22:22 SkyScan query 11:22:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.76<-13584 Statuses=0008 0009 11:22:23 Msec=0 True Az=112.995 Ze=-23.76 Az status=0008 Ze status=0009 11:22:23 Check angles 11:22:23 SkyScan query 11:22:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.15<-15010 Statuses=0008 0009 11:22:23 Msec=750 True Az=112.995 Ze=-45.15 Az status=0008 Ze status=0009 11:22:24 Check angles 11:22:24 SkyScan query 11:22:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.105<-16407 Statuses=0008 0009 11:22:24 Msec=1500 True Az=112.995 Ze=-66.105 Az status=0008 Ze status=0009 11:22:24 Check angles 11:22:24 SkyScan query 11:22:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 11:22:25 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 11:22:25 Check angles 11:22:25 SkyScan query 11:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-108<-19200 Statuses=0008 0009 11:22:26 Msec=3000 True Az=112.995 Ze=-108 Az status=0008 Ze status=0009 11:22:26 Check angles 11:22:26 SkyScan query 11:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.39<-20626 Statuses=0008 0009 11:22:26 Msec=3750 True Az=112.995 Ze=-129.39 Az status=0008 Ze status=0009 11:22:27 Check angles 11:22:27 SkyScan query 11:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.765<-22051 Statuses=0008 0009 11:22:27 Msec=4500 True Az=112.995 Ze=-150.765 Az status=0008 Ze status=0009 11:22:27 Check angles 11:22:27 SkyScan query 11:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.75<-23450 Statuses=0008 0009 11:22:28 Msec=5250 True Az=112.995 Ze=-171.75 Az status=0008 Ze status=0009 11:22:28 Check angles 11:22:28 SkyScan query 11:22:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:22:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:22:29 Message to Master queued w/err=0: serial=49666 error=0 11:22:34 Received message from Master: op=Filter serial=49667 11:22:34 Color wheel filter change from 0 to 0 11:22:34 FLIGetFilterPos err=0 currentPosition=0 11:22:34 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:34 Filter is already there-color wheel unchanged 11:22:34 Received message from Master: op=Shutter serial=49668 11:22:34 Shutter LASER open 11:22:34 Received message from Camera: op=State serial=49670 11:22:34 GetSingleValue result=40 Value=cccccccc 11:22:34 SkyScan query 11:22:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:22:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:35 Parameters OK 11:22:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:35 Set A/D data flow result=40 11:22:35 Set A/D channel type result=40 11:22:35 Set A/D encoding result=40 11:22:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:35 Set channel filter=0.000000e+000 result=40 11:22:35 Config A/D Result=40 11:22:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:35 Get A/D filter: -9.255963e+061 result=40 11:22:35 Get A/D value=-858993460 result=40 11:22:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:35 Parameters OK 11:22:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:35 Set A/D data flow result=40 11:22:35 Set A/D channel type result=40 11:22:35 Set A/D encoding result=40 11:22:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:35 Set channel filter=0.000000e+000 result=40 11:22:35 Config A/D Result=40 11:22:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:35 Get A/D filter: -9.255963e+061 result=40 11:22:35 Get A/D value=-858993460 result=40 11:22:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:35 Aux= 11:22:35 Message to Camera, serial 49670 queued 11:22:42 Received message from Master: op=Shutter serial=49679 11:22:42 Shutter LASER close 11:22:43 Received message from Master: op=PointingHead serial=49683 11:22:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:22:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:22:43 Point started: ret=0 11:22:43 point_skyscan result=0 11:22:44 Check angles 11:22:44 SkyScan query 11:22:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 11:22:44 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 11:22:44 Check angles 11:22:44 SkyScan query 11:22:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 11:22:45 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 11:22:45 Check angles 11:22:45 SkyScan query 11:22:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 11:22:46 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 11:22:46 Check angles 11:22:46 SkyScan query 11:22:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.265<-17351 Statuses=0008 0009 11:22:46 Msec=2250 True Az=112.995 Ze=-80.265 Az status=0008 Ze status=0009 11:22:47 Check angles 11:22:47 SkyScan query 11:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.31<-15954 Statuses=0008 0009 11:22:47 Msec=3000 True Az=112.995 Ze=-59.31 Az status=0008 Ze status=0009 11:22:47 Check angles 11:22:47 SkyScan query 11:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.34<-14556 Statuses=0008 0009 11:22:48 Msec=3750 True Az=112.995 Ze=-38.34 Az status=0008 Ze status=0009 11:22:48 Check angles 11:22:48 SkyScan query 11:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.4<-13160 Statuses=0008 0009 11:22:49 Msec=4500 True Az=112.995 Ze=-17.4 Az status=0008 Ze status=0009 11:22:49 Check angles 11:22:49 SkyScan query 11:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=3.555<-11763 Statuses=0008 0009 11:22:49 Msec=5250 True Az=112.995 Ze=3.555 Az status=0008 Ze status=0009 11:22:50 Check angles 11:22:50 SkyScan query 11:22:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:22:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:22:50 Message to Master queued w/err=0: serial=49683 error=0 11:22:55 Received message from Master: op=Filter serial=49684 11:22:55 Color wheel filter change from 0 to 0 11:22:55 FLIGetFilterPos err=0 currentPosition=0 11:22:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:55 Filter is already there-color wheel unchanged 11:22:55 Received message from Master: op=Shutter serial=49685 11:22:55 Shutter LASER close 11:22:56 Received message from Camera: op=State serial=49687 11:22:56 GetSingleValue result=40 Value=cccccccc 11:22:56 SkyScan query 11:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:22:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:56 Parameters OK 11:22:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:56 Set A/D data flow result=40 11:22:56 Set A/D channel type result=40 11:22:56 Set A/D encoding result=40 11:22:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:56 Set channel filter=0.000000e+000 result=40 11:22:56 Config A/D Result=40 11:22:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:56 Get A/D filter: -9.255963e+061 result=40 11:22:56 Get A/D value=-858993460 result=40 11:22:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:56 Parameters OK 11:22:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:56 Set A/D data flow result=40 11:22:56 Set A/D channel type result=40 11:22:56 Set A/D encoding result=40 11:22:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:56 Set channel filter=0.000000e+000 result=40 11:22:56 Config A/D Result=40 11:22:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:56 Get A/D filter: -9.255963e+061 result=40 11:22:56 Get A/D value=-858993460 result=40 11:22:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:56 Aux= 11:22:56 Message to Camera, serial 49687 queued 11:23:33 Received message from Master: op=PointingHead serial=49700 11:23:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:23:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:23:33 Point started: ret=0 11:23:33 point_skyscan result=0 11:23:34 Check angles 11:23:34 SkyScan query 11:23:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:23:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:23:35 Message to Master queued w/err=0: serial=49700 error=0 11:23:40 Received message from Master: op=Filter serial=49701 11:23:40 Color wheel filter change from 0 to 0 11:23:40 FLIGetFilterPos err=0 currentPosition=0 11:23:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:40 Filter is already there-color wheel unchanged 11:23:40 Received message from Master: op=Shutter serial=49702 11:23:40 Shutter LASER close 11:23:40 Received message from Camera: op=State serial=49704 11:23:40 GetSingleValue result=40 Value=cccccccc 11:23:40 SkyScan query 11:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:23:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:40 Parameters OK 11:23:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:40 Set A/D data flow result=40 11:23:40 Set A/D channel type result=40 11:23:40 Set A/D encoding result=40 11:23:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:40 Set channel filter=0.000000e+000 result=40 11:23:40 Config A/D Result=40 11:23:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:40 Get A/D filter: -9.255963e+061 result=40 11:23:40 Get A/D value=-858993460 result=40 11:23:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:40 Parameters OK 11:23:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:40 Set A/D data flow result=40 11:23:40 Set A/D channel type result=40 11:23:40 Set A/D encoding result=40 11:23:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:40 Set channel filter=0.000000e+000 result=40 11:23:40 Config A/D Result=40 11:23:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:40 Get A/D filter: -9.255963e+061 result=40 11:23:40 Get A/D value=-858993460 result=40 11:23:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:40 Aux= 11:23:40 Message to Camera, serial 49704 queued [UTC 2019-3-1 11:23:50] 11:24:17 Received message from Master: op=PointingHead serial=49717 11:24:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:24:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:24:18 Point started: ret=0 11:24:18 point_skyscan result=0 11:24:18 Check angles 11:24:18 SkyScan query 11:24:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:24:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:24:19 Message to Master queued w/err=0: serial=49717 error=0 11:24:24 Received message from Master: op=Filter serial=49718 11:24:24 Color wheel filter change from 0 to 0 11:24:24 FLIGetFilterPos err=0 currentPosition=0 11:24:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:24 Filter is already there-color wheel unchanged 11:24:24 Received message from Master: op=Shutter serial=49719 11:24:24 Shutter LASER close 11:24:24 Received message from Camera: op=State serial=49721 11:24:24 GetSingleValue result=40 Value=cccccccc 11:24:24 SkyScan query 11:24:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:24:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:25 Parameters OK 11:24:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:25 Set A/D data flow result=40 11:24:25 Set A/D channel type result=40 11:24:25 Set A/D encoding result=40 11:24:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:25 Set channel filter=0.000000e+000 result=40 11:24:25 Config A/D Result=40 11:24:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:25 Get A/D filter: -9.255963e+061 result=40 11:24:25 Get A/D value=-858993460 result=40 11:24:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:25 Parameters OK 11:24:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:25 Set A/D data flow result=40 11:24:25 Set A/D channel type result=40 11:24:25 Set A/D encoding result=40 11:24:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:25 Set channel filter=0.000000e+000 result=40 11:24:25 Config A/D Result=40 11:24:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:25 Get A/D filter: -9.255963e+061 result=40 11:24:25 Get A/D value=-858993460 result=40 11:24:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:25 Aux= 11:24:25 Message to Camera, serial 49721 queued 11:25:01 Received message from Master: op=PointingHead serial=49734 11:25:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:25:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:25:02 Point started: ret=0 11:25:02 point_skyscan result=0 11:25:03 Check angles 11:25:03 SkyScan query 11:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:25:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:25:03 Message to Master queued w/err=0: serial=49734 error=0 11:25:08 Received message from Master: op=Filter serial=49735 11:25:08 Color wheel filter change from 0 to 0 11:25:08 FLIGetFilterPos err=0 currentPosition=0 11:25:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:08 Filter is already there-color wheel unchanged 11:25:08 Received message from Master: op=Shutter serial=49736 11:25:08 Shutter LASER close 11:25:08 Received message from Camera: op=State serial=49738 11:25:08 GetSingleValue result=40 Value=cccccccc 11:25:08 SkyScan query 11:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:25:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:09 Parameters OK 11:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:09 Set A/D data flow result=40 11:25:09 Set A/D channel type result=40 11:25:09 Set A/D encoding result=40 11:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:09 Set channel filter=0.000000e+000 result=40 11:25:09 Config A/D Result=40 11:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:09 Get A/D filter: -9.255963e+061 result=40 11:25:09 Get A/D value=-858993460 result=40 11:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:09 Parameters OK 11:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:09 Set A/D data flow result=40 11:25:09 Set A/D channel type result=40 11:25:09 Set A/D encoding result=40 11:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:09 Set channel filter=0.000000e+000 result=40 11:25:09 Config A/D Result=40 11:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:09 Get A/D filter: -9.255963e+061 result=40 11:25:09 Get A/D value=-858993460 result=40 11:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:09 Aux= 11:25:09 Message to Camera, serial 49738 queued 11:25:46 Received message from Master: op=PointingHead serial=49751 11:25:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:25:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:25:46 Point started: ret=0 11:25:46 point_skyscan result=0 11:25:47 Check angles 11:25:47 SkyScan query 11:25:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 11:25:47 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 11:25:48 Check angles 11:25:48 SkyScan query 11:25:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 11:25:48 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 11:25:48 Check angles 11:25:48 SkyScan query 11:25:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 11:25:49 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 11:25:49 Check angles 11:25:49 SkyScan query 11:25:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 11:25:50 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 11:25:50 Check angles 11:25:50 SkyScan query 11:25:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 11:25:50 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 11:25:51 Check angles 11:25:51 SkyScan query 11:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.235<-20549 Statuses=0008 0009 11:25:51 Msec=3750 True Az=112.995 Ze=-128.235 Az status=0008 Ze status=0009 11:25:51 Check angles 11:25:51 SkyScan query 11:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.19<-21946 Statuses=0008 0009 11:25:52 Msec=4500 True Az=112.995 Ze=-149.19 Az status=0008 Ze status=0009 11:25:52 Check angles 11:25:52 SkyScan query 11:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.16<-23344 Statuses=0008 0009 11:25:53 Msec=5250 True Az=112.995 Ze=-170.16 Az status=0008 Ze status=0009 11:25:53 Check angles 11:25:53 SkyScan query 11:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:25:53 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:25:53 Message to Master queued w/err=0: serial=49751 error=0 11:25:58 Received message from Master: op=Filter serial=49752 11:25:58 Color wheel filter change from 0 to 0 11:25:58 FLIGetFilterPos err=0 currentPosition=0 11:25:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:58 Filter is already there-color wheel unchanged 11:25:59 Received message from Master: op=Shutter serial=49753 11:25:59 Shutter LASER open 11:25:59 Received message from Camera: op=State serial=49755 11:25:59 GetSingleValue result=40 Value=cccccccc 11:25:59 SkyScan query 11:25:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:25:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:59 Parameters OK 11:25:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:59 Set A/D data flow result=40 11:25:59 Set A/D channel type result=40 11:25:59 Set A/D encoding result=40 11:25:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:59 Set channel filter=0.000000e+000 result=40 11:25:59 Config A/D Result=40 11:25:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:59 Get A/D filter: -9.255963e+061 result=40 11:25:59 Get A/D value=-858993460 result=40 11:25:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:59 Parameters OK 11:25:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:59 Set A/D data flow result=40 11:25:59 Set A/D channel type result=40 11:25:59 Set A/D encoding result=40 11:25:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:59 Set channel filter=0.000000e+000 result=40 11:25:59 Config A/D Result=40 11:25:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:59 Get A/D filter: -9.255963e+061 result=40 11:25:59 Get A/D value=-858993460 result=40 11:25:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:59 Aux= 11:25:59 Message to Camera, serial 49755 queued 11:26:08 Received message from Master: op=Shutter serial=49765 11:26:08 Shutter LASER close 11:26:08 Received message from Master: op=PointingHead serial=49769 11:26:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:26:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:26:09 Point started: ret=0 11:26:09 point_skyscan result=0 11:26:10 Check angles 11:26:10 SkyScan query 11:26:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.86<-21524 Statuses=0008 0009 11:26:10 Msec=0 True Az=112.995 Ze=-142.86 Az status=0008 Ze status=0009 11:26:10 Check angles 11:26:10 SkyScan query 11:26:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.485<-20099 Statuses=0008 0009 11:26:11 Msec=750 True Az=112.995 Ze=-121.485 Az status=0008 Ze status=0009 11:26:11 Check angles 11:26:11 SkyScan query 11:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.095<-18673 Statuses=0008 0009 11:26:12 Msec=1500 True Az=112.995 Ze=-100.095 Az status=0008 Ze status=0009 11:26:12 Check angles 11:26:12 SkyScan query 11:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.14<-17276 Statuses=0008 0009 11:26:12 Msec=2250 True Az=112.995 Ze=-79.14 Az status=0008 Ze status=0009 11:26:13 Check angles 11:26:13 SkyScan query 11:26:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.17<-15878 Statuses=0008 0009 11:26:13 Msec=3000 True Az=112.995 Ze=-58.17 Az status=0008 Ze status=0009 11:26:13 Check angles 11:26:13 SkyScan query 11:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.23<-14482 Statuses=0008 0009 11:26:14 Msec=3750 True Az=112.995 Ze=-37.23 Az status=0008 Ze status=0009 11:26:14 Check angles 11:26:14 SkyScan query 11:26:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.26<-13084 Statuses=0008 0009 11:26:15 Msec=4500 True Az=112.995 Ze=-16.26 Az status=0008 Ze status=0009 11:26:15 Check angles 11:26:15 SkyScan query 11:26:15 SkyScan query done: ret=0 az=112.995<-7533 ze=4.89<-11674 Statuses=0008 0009 11:26:15 Msec=5250 True Az=112.995 Ze=4.89 Az status=0008 Ze status=0009 11:26:16 Check angles 11:26:16 SkyScan query 11:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:26:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:26:16 Message to Master queued w/err=0: serial=49769 error=0 11:26:21 Received message from Master: op=Filter serial=49770 11:26:21 Color wheel filter change from 0 to 0 11:26:21 FLIGetFilterPos err=0 currentPosition=0 11:26:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:21 Filter is already there-color wheel unchanged 11:26:21 Received message from Master: op=Shutter serial=49771 11:26:21 Shutter LASER close 11:26:22 Received message from Camera: op=State serial=49773 11:26:22 GetSingleValue result=40 Value=cccccccc 11:26:22 SkyScan query 11:26:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:26:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:22 Parameters OK 11:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:22 Set A/D data flow result=40 11:26:22 Set A/D channel type result=40 11:26:22 Set A/D encoding result=40 11:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:22 Set channel filter=0.000000e+000 result=40 11:26:22 Config A/D Result=40 11:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:22 Get A/D filter: -9.255963e+061 result=40 11:26:22 Get A/D value=-858993460 result=40 11:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:22 Parameters OK 11:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:22 Set A/D data flow result=40 11:26:22 Set A/D channel type result=40 11:26:22 Set A/D encoding result=40 11:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:22 Set channel filter=0.000000e+000 result=40 11:26:22 Config A/D Result=40 11:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:22 Get A/D filter: -9.255963e+061 result=40 11:26:22 Get A/D value=-858993460 result=40 11:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:22 Aux= 11:26:22 Message to Camera, serial 49773 queued 11:26:59 Received message from Master: op=PointingHead serial=49786 11:26:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:26:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:26:59 Point started: ret=0 11:26:59 point_skyscan result=0 11:27:00 Check angles 11:27:00 SkyScan query 11:27:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:27:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:27:01 Message to Master queued w/err=0: serial=49786 error=0 11:27:06 Received message from Master: op=Filter serial=49787 11:27:06 Color wheel filter change from 0 to 0 11:27:06 FLIGetFilterPos err=0 currentPosition=0 11:27:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:06 Filter is already there-color wheel unchanged 11:27:06 Received message from Master: op=Shutter serial=49788 11:27:06 Shutter LASER close 11:27:06 Received message from Camera: op=State serial=49790 11:27:06 GetSingleValue result=40 Value=cccccccc 11:27:06 SkyScan query 11:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:27:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:06 Parameters OK 11:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:06 Set A/D data flow result=40 11:27:06 Set A/D channel type result=40 11:27:06 Set A/D encoding result=40 11:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:06 Set channel filter=0.000000e+000 result=40 11:27:06 Config A/D Result=40 11:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:06 Get A/D filter: -9.255963e+061 result=40 11:27:06 Get A/D value=-858993460 result=40 11:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:06 Parameters OK 11:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:06 Set A/D data flow result=40 11:27:06 Set A/D channel type result=40 11:27:06 Set A/D encoding result=40 11:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:06 Set channel filter=0.000000e+000 result=40 11:27:06 Config A/D Result=40 11:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:06 Get A/D filter: -9.255963e+061 result=40 11:27:06 Get A/D value=-858993460 result=40 11:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:06 Aux= 11:27:06 Message to Camera, serial 49790 queued 11:27:43 Received message from Master: op=PointingHead serial=49803 11:27:43 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:27:43 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:27:44 Point started: ret=0 11:27:44 point_skyscan result=0 11:27:44 Check angles 11:27:44 SkyScan query 11:27:45 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 11:27:45 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 11:27:45 Check angles 11:27:45 SkyScan query 11:27:46 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 11:27:46 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 11:27:46 Check angles 11:27:46 SkyScan query 11:27:46 SkyScan query done: ret=0 az=171.51<-11434 ze=-6.495<-12433 Statuses=0009 0008 11:27:46 Msec=1500 True Az=171.51 Ze=-6.495 Az status=0009 Ze status=0008 11:27:47 Check angles 11:27:47 SkyScan query 11:27:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:27:47 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:27:47 Message to Master queued w/err=0: serial=49803 error=0 11:27:52 Received message from Master: op=Filter serial=49804 11:27:52 Color wheel filter change from 0 to 0 11:27:52 FLIGetFilterPos err=0 currentPosition=0 11:27:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:52 Filter is already there-color wheel unchanged 11:27:52 Received message from Master: op=Shutter serial=49805 11:27:52 Shutter LASER close 11:27:52 Received message from Camera: op=State serial=49807 11:27:52 GetSingleValue result=40 Value=cccccccc 11:27:52 SkyScan query 11:27:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:27:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:53 Parameters OK 11:27:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:53 Set A/D data flow result=40 11:27:53 Set A/D channel type result=40 11:27:53 Set A/D encoding result=40 11:27:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:53 Set channel filter=0.000000e+000 result=40 11:27:53 Config A/D Result=40 11:27:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:53 Get A/D filter: -9.255963e+061 result=40 11:27:53 Get A/D value=-858993460 result=40 11:27:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:53 Parameters OK 11:27:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:53 Set A/D data flow result=40 11:27:53 Set A/D channel type result=40 11:27:53 Set A/D encoding result=40 11:27:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:53 Set channel filter=0.000000e+000 result=40 11:27:53 Config A/D Result=40 11:27:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:53 Get A/D filter: -9.255963e+061 result=40 11:27:53 Get A/D value=-858993460 result=40 11:27:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:53 Aux= 11:27:53 Message to Camera, serial 49807 queued 11:28:30 Received message from Master: op=PointingHead serial=49820 11:28:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:28:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:28:30 Point started: ret=0 11:28:30 point_skyscan result=0 11:28:31 Check angles 11:28:31 SkyScan query 11:28:32 SkyScan query done: ret=0 az=152.805<-10187 ze=6.51<-11566 Statuses=0009 0008 11:28:32 Msec=0 True Az=152.805 Ze=6.51 Az status=0009 Ze status=0008 11:28:32 Check angles 11:28:32 SkyScan query 11:28:32 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 11:28:32 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 11:28:32 Check angles 11:28:32 SkyScan query 11:28:33 SkyScan query done: ret=0 az=117.885<-7859 ze=6.495<-11567 Statuses=0009 0008 11:28:33 Msec=1500 True Az=117.885 Ze=6.495 Az status=0009 Ze status=0008 11:28:33 Check angles 11:28:33 SkyScan query 11:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:28:34 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:28:34 Message to Master queued w/err=0: serial=49820 error=0 11:28:39 Received message from Master: op=Filter serial=49821 11:28:39 Color wheel filter change from 0 to 0 11:28:39 FLIGetFilterPos err=0 currentPosition=0 11:28:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:39 Filter is already there-color wheel unchanged 11:28:39 Received message from Master: op=Shutter serial=49822 11:28:39 Shutter LASER close 11:28:39 Received message from Camera: op=State serial=49824 11:28:39 GetSingleValue result=40 Value=cccccccc 11:28:39 SkyScan query 11:28:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:28:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:40 Parameters OK 11:28:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:40 Set A/D data flow result=40 11:28:40 Set A/D channel type result=40 11:28:40 Set A/D encoding result=40 11:28:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:40 Set channel filter=0.000000e+000 result=40 11:28:40 Config A/D Result=40 11:28:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:40 Get A/D filter: -9.255963e+061 result=40 11:28:40 Get A/D value=-858993460 result=40 11:28:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:40 Parameters OK 11:28:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:40 Set A/D data flow result=40 11:28:40 Set A/D channel type result=40 11:28:40 Set A/D encoding result=40 11:28:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:40 Set channel filter=0.000000e+000 result=40 11:28:40 Config A/D Result=40 11:28:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:40 Get A/D filter: -9.255963e+061 result=40 11:28:40 Get A/D value=-858993460 result=40 11:28:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:40 Aux= 11:28:40 Message to Camera, serial 49824 queued 11:29:16 Received message from Master: op=PointingHead serial=49837 11:29:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:29:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:29:17 Point started: ret=0 11:29:17 point_skyscan result=0 11:29:18 Check angles 11:29:18 SkyScan query 11:29:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 11:29:18 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 11:29:18 Check angles 11:29:18 SkyScan query 11:29:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.01<-14934 Statuses=0008 0009 11:29:19 Msec=750 True Az=112.995 Ze=-44.01 Az status=0008 Ze status=0009 11:29:19 Check angles 11:29:19 SkyScan query 11:29:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 11:29:20 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 11:29:20 Check angles 11:29:20 SkyScan query 11:29:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.355<-17757 Statuses=0008 0009 11:29:20 Msec=2250 True Az=112.995 Ze=-86.355 Az status=0008 Ze status=0009 11:29:21 Check angles 11:29:21 SkyScan query 11:29:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.745<-19183 Statuses=0008 0009 11:29:21 Msec=3000 True Az=112.995 Ze=-107.745 Az status=0008 Ze status=0009 11:29:21 Check angles 11:29:21 SkyScan query 11:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.685<-20579 Statuses=0008 0009 11:29:22 Msec=3750 True Az=112.995 Ze=-128.685 Az status=0008 Ze status=0009 11:29:22 Check angles 11:29:22 SkyScan query 11:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 11:29:23 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 11:29:23 Check angles 11:29:23 SkyScan query 11:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0008 0009 11:29:23 Msec=5250 True Az=112.995 Ze=-170.925 Az status=0008 Ze status=0009 11:29:24 Check angles 11:29:24 SkyScan query 11:29:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:29:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:29:24 Message to Master queued w/err=0: serial=49837 error=0 11:29:29 Received message from Master: op=Filter serial=49838 11:29:29 Color wheel filter change from 0 to 0 11:29:29 FLIGetFilterPos err=0 currentPosition=0 11:29:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:29 Filter is already there-color wheel unchanged 11:29:29 Received message from Master: op=Shutter serial=49839 11:29:29 Shutter LASER open 11:29:30 Received message from Camera: op=State serial=49841 11:29:30 GetSingleValue result=40 Value=cccccccc 11:29:30 SkyScan query 11:29:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:29:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:30 Parameters OK 11:29:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:30 Set A/D data flow result=40 11:29:30 Set A/D channel type result=40 11:29:30 Set A/D encoding result=40 11:29:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:30 Set channel filter=0.000000e+000 result=40 11:29:30 Config A/D Result=40 11:29:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:30 Get A/D filter: -9.255963e+061 result=40 11:29:30 Get A/D value=-858993460 result=40 11:29:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:30 Parameters OK 11:29:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:30 Set A/D data flow result=40 11:29:30 Set A/D channel type result=40 11:29:30 Set A/D encoding result=40 11:29:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:30 Set channel filter=0.000000e+000 result=40 11:29:30 Config A/D Result=40 11:29:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:30 Get A/D filter: -9.255963e+061 result=40 11:29:30 Get A/D value=-858993460 result=40 11:29:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:30 Aux= 11:29:30 Message to Camera, serial 49841 queued 11:29:39 Received message from Master: op=Shutter serial=49851 11:29:39 Shutter LASER close 11:29:39 Received message from Master: op=PointingHead serial=49855 11:29:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:29:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:29:39 Point started: ret=0 11:29:39 point_skyscan result=0 11:29:40 Check angles 11:29:40 SkyScan query 11:29:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.695<-21513 Statuses=0008 0009 11:29:41 Msec=0 True Az=112.995 Ze=-142.695 Az status=0008 Ze status=0009 11:29:41 Check angles 11:29:41 SkyScan query 11:29:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.32<-20088 Statuses=0008 0009 11:29:41 Msec=750 True Az=112.995 Ze=-121.32 Az status=0008 Ze status=0009 11:29:42 Check angles 11:29:42 SkyScan query 11:29:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.365<-18691 Statuses=0008 0009 11:29:42 Msec=1500 True Az=112.995 Ze=-100.365 Az status=0008 Ze status=0009 11:29:42 Check angles 11:29:42 SkyScan query 11:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.395<-17293 Statuses=0008 0009 11:29:43 Msec=2250 True Az=112.995 Ze=-79.395 Az status=0008 Ze status=0009 11:29:43 Check angles 11:29:43 SkyScan query 11:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.425<-15895 Statuses=0008 0009 11:29:44 Msec=3000 True Az=112.995 Ze=-58.425 Az status=0008 Ze status=0009 11:29:44 Check angles 11:29:44 SkyScan query 11:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.5<-14500 Statuses=0008 0009 11:29:44 Msec=3750 True Az=112.995 Ze=-37.5 Az status=0008 Ze status=0009 11:29:45 Check angles 11:29:45 SkyScan query 11:29:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.515<-13101 Statuses=0008 0009 11:29:45 Msec=4500 True Az=112.995 Ze=-16.515 Az status=0008 Ze status=0009 11:29:45 Check angles 11:29:45 SkyScan query 11:29:46 SkyScan query done: ret=0 az=112.995<-7533 ze=4.365<-11709 Statuses=0008 0009 11:29:46 Msec=5250 True Az=112.995 Ze=4.365 Az status=0008 Ze status=0009 11:29:46 Check angles 11:29:46 SkyScan query 11:29:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:29:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:29:47 Message to Master queued w/err=0: serial=49855 error=0 11:29:52 Received message from Master: op=Filter serial=49856 11:29:52 Color wheel filter change from 0 to 0 11:29:52 FLIGetFilterPos err=0 currentPosition=0 11:29:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:52 Filter is already there-color wheel unchanged 11:29:52 Received message from Master: op=Shutter serial=49857 11:29:52 Shutter LASER close 11:29:52 Received message from Camera: op=State serial=49859 11:29:52 GetSingleValue result=40 Value=cccccccc 11:29:52 SkyScan query 11:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:29:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:53 Parameters OK 11:29:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:53 Set A/D data flow result=40 11:29:53 Set A/D channel type result=40 11:29:53 Set A/D encoding result=40 11:29:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:53 Set channel filter=0.000000e+000 result=40 11:29:53 Config A/D Result=40 11:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:53 Get A/D filter: -9.255963e+061 result=40 11:29:53 Get A/D value=-858993460 result=40 11:29:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:53 Parameters OK 11:29:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:53 Set A/D data flow result=40 11:29:53 Set A/D channel type result=40 11:29:53 Set A/D encoding result=40 11:29:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:53 Set channel filter=0.000000e+000 result=40 11:29:53 Config A/D Result=40 11:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:53 Get A/D filter: -9.255963e+061 result=40 11:29:53 Get A/D value=-858993460 result=40 11:29:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:53 Aux= 11:29:53 Message to Camera, serial 49859 queued 11:30:29 Received message from Master: op=PointingHead serial=49872 11:30:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:30:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:30:30 Point started: ret=0 11:30:30 point_skyscan result=0 11:30:31 Check angles 11:30:31 SkyScan query 11:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:30:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:30:31 Message to Master queued w/err=0: serial=49872 error=0 11:30:36 Received message from Master: op=Filter serial=49873 11:30:36 Color wheel filter change from 0 to 0 11:30:36 FLIGetFilterPos err=0 currentPosition=0 11:30:36 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:36 Filter is already there-color wheel unchanged 11:30:36 Received message from Master: op=Shutter serial=49874 11:30:36 Shutter LASER close 11:30:36 Received message from Camera: op=State serial=49876 11:30:36 GetSingleValue result=40 Value=cccccccc 11:30:36 SkyScan query 11:30:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:30:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:37 Parameters OK 11:30:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:37 Set A/D data flow result=40 11:30:37 Set A/D channel type result=40 11:30:37 Set A/D encoding result=40 11:30:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:37 Set channel filter=0.000000e+000 result=40 11:30:37 Config A/D Result=40 11:30:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:37 Get A/D filter: -9.255963e+061 result=40 11:30:37 Get A/D value=-858993460 result=40 11:30:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:37 Parameters OK 11:30:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:37 Set A/D data flow result=40 11:30:37 Set A/D channel type result=40 11:30:37 Set A/D encoding result=40 11:30:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:37 Set channel filter=0.000000e+000 result=40 11:30:37 Config A/D Result=40 11:30:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:37 Get A/D filter: -9.255963e+061 result=40 11:30:37 Get A/D value=-858993460 result=40 11:30:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:37 Aux= 11:30:37 Message to Camera, serial 49876 queued 11:31:14 Received message from Master: op=PointingHead serial=49889 11:31:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:31:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:31:14 Point started: ret=0 11:31:14 point_skyscan result=0 11:31:15 Check angles 11:31:15 SkyScan query 11:31:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:31:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:31:15 Message to Master queued w/err=0: serial=49889 error=0 11:31:20 Received message from Master: op=Filter serial=49890 11:31:20 Color wheel filter change from 0 to 0 11:31:20 FLIGetFilterPos err=0 currentPosition=0 11:31:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:20 Filter is already there-color wheel unchanged 11:31:21 Received message from Master: op=Shutter serial=49891 11:31:21 Shutter LASER close 11:31:21 Received message from Camera: op=State serial=49893 11:31:21 GetSingleValue result=40 Value=cccccccc 11:31:21 SkyScan query 11:31:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:31:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:21 Parameters OK 11:31:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:21 Set A/D data flow result=40 11:31:21 Set A/D channel type result=40 11:31:21 Set A/D encoding result=40 11:31:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:21 Set channel filter=0.000000e+000 result=40 11:31:21 Config A/D Result=40 11:31:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:21 Get A/D filter: -9.255963e+061 result=40 11:31:21 Get A/D value=-858993460 result=40 11:31:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:21 Parameters OK 11:31:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:21 Set A/D data flow result=40 11:31:21 Set A/D channel type result=40 11:31:21 Set A/D encoding result=40 11:31:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:21 Set channel filter=0.000000e+000 result=40 11:31:21 Config A/D Result=40 11:31:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:21 Get A/D filter: -9.255963e+061 result=40 11:31:21 Get A/D value=-858993460 result=40 11:31:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:21 Aux= 11:31:21 Message to Camera, serial 49893 queued 11:31:58 Received message from Master: op=PointingHead serial=49906 11:31:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:31:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:31:58 Point started: ret=0 11:31:58 point_skyscan result=0 11:31:59 Check angles 11:31:59 SkyScan query 11:32:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:32:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:32:00 Message to Master queued w/err=0: serial=49906 error=0 11:32:05 Received message from Master: op=Filter serial=49907 11:32:05 Color wheel filter change from 0 to 0 11:32:05 FLIGetFilterPos err=0 currentPosition=0 11:32:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:05 Filter is already there-color wheel unchanged 11:32:05 Received message from Master: op=Shutter serial=49908 11:32:05 Shutter LASER close 11:32:05 Received message from Camera: op=State serial=49910 11:32:05 GetSingleValue result=40 Value=cccccccc 11:32:05 SkyScan query 11:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:32:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:06 Parameters OK 11:32:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:06 Set A/D data flow result=40 11:32:06 Set A/D channel type result=40 11:32:06 Set A/D encoding result=40 11:32:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:06 Set channel filter=0.000000e+000 result=40 11:32:06 Config A/D Result=40 11:32:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:06 Get A/D filter: -9.255963e+061 result=40 11:32:06 Get A/D value=-858993460 result=40 11:32:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:06 Parameters OK 11:32:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:06 Set A/D data flow result=40 11:32:06 Set A/D channel type result=40 11:32:06 Set A/D encoding result=40 11:32:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:06 Set channel filter=0.000000e+000 result=40 11:32:06 Config A/D Result=40 11:32:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:06 Get A/D filter: -9.255963e+061 result=40 11:32:06 Get A/D value=-858993460 result=40 11:32:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:06 Aux= 11:32:06 Message to Camera, serial 49910 queued 11:32:42 Received message from Master: op=PointingHead serial=49923 11:32:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:32:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:32:43 Point started: ret=0 11:32:43 point_skyscan result=0 11:32:43 Check angles 11:32:43 SkyScan query 11:32:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 11:32:44 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 11:32:44 Check angles 11:32:44 SkyScan query 11:32:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.94<-14996 Statuses=0008 0009 11:32:45 Msec=750 True Az=112.995 Ze=-44.94 Az status=0008 Ze status=0009 11:32:45 Check angles 11:32:45 SkyScan query 11:32:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.88<-16392 Statuses=0008 0009 11:32:46 Msec=1500 True Az=112.995 Ze=-65.88 Az status=0008 Ze status=0009 11:32:46 Check angles 11:32:46 SkyScan query 11:32:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 11:32:46 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 11:32:46 Check angles 11:32:46 SkyScan query 11:32:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.21<-19214 Statuses=0008 0009 11:32:47 Msec=3000 True Az=112.995 Ze=-108.21 Az status=0008 Ze status=0009 11:32:47 Check angles 11:32:47 SkyScan query 11:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.165<-20611 Statuses=0008 0009 11:32:48 Msec=3750 True Az=112.995 Ze=-129.165 Az status=0008 Ze status=0009 11:32:48 Check angles 11:32:48 SkyScan query 11:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.12<-22008 Statuses=0008 0009 11:32:49 Msec=4500 True Az=112.995 Ze=-150.12 Az status=0008 Ze status=0009 11:32:49 Check angles 11:32:49 SkyScan query 11:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0008 0009 11:32:49 Msec=5250 True Az=112.995 Ze=-170.955 Az status=0008 Ze status=0009 11:32:49 Check angles 11:32:49 SkyScan query 11:32:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:32:50 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:32:50 Message to Master queued w/err=0: serial=49923 error=0 11:32:55 Received message from Master: op=Filter serial=49924 11:32:55 Color wheel filter change from 0 to 0 11:32:55 FLIGetFilterPos err=0 currentPosition=0 11:32:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:55 Filter is already there-color wheel unchanged 11:32:55 Received message from Master: op=Shutter serial=49925 11:32:55 Shutter LASER open 11:32:55 Received message from Camera: op=State serial=49927 11:32:55 GetSingleValue result=40 Value=cccccccc 11:32:55 SkyScan query 11:32:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:32:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:56 Parameters OK 11:32:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:56 Set A/D data flow result=40 11:32:56 Set A/D channel type result=40 11:32:56 Set A/D encoding result=40 11:32:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:56 Set channel filter=0.000000e+000 result=40 11:32:56 Config A/D Result=40 11:32:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:56 Get A/D filter: -9.255963e+061 result=40 11:32:56 Get A/D value=-858993460 result=40 11:32:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:56 Parameters OK 11:32:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:56 Set A/D data flow result=40 11:32:56 Set A/D channel type result=40 11:32:56 Set A/D encoding result=40 11:32:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:56 Set channel filter=0.000000e+000 result=40 11:32:56 Config A/D Result=40 11:32:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:56 Get A/D filter: -9.255963e+061 result=40 11:32:56 Get A/D value=-858993460 result=40 11:32:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:56 Aux= 11:32:56 Message to Camera, serial 49927 queued 11:33:04 Received message from Master: op=Shutter serial=49937 11:33:04 Shutter LASER close 11:33:05 Received message from Master: op=PointingHead serial=49941 11:33:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:33:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:33:05 Point started: ret=0 11:33:05 point_skyscan result=0 11:33:06 Check angles 11:33:06 SkyScan query 11:33:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 11:33:07 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 11:33:07 Check angles 11:33:07 SkyScan query 11:33:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.43<-20162 Statuses=0008 0009 11:33:07 Msec=750 True Az=112.995 Ze=-122.43 Az status=0008 Ze status=0009 11:33:08 Check angles 11:33:08 SkyScan query 11:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 11:33:08 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 11:33:08 Check angles 11:33:08 SkyScan query 11:33:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.505<-17367 Statuses=0008 0009 11:33:09 Msec=2250 True Az=112.995 Ze=-80.505 Az status=0008 Ze status=0009 11:33:09 Check angles 11:33:09 SkyScan query 11:33:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.55<-15970 Statuses=0008 0009 11:33:10 Msec=3000 True Az=112.995 Ze=-59.55 Az status=0008 Ze status=0009 11:33:10 Check angles 11:33:10 SkyScan query 11:33:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.595<-14573 Statuses=0008 0009 11:33:10 Msec=3750 True Az=112.995 Ze=-38.595 Az status=0008 Ze status=0009 11:33:11 Check angles 11:33:11 SkyScan query 11:33:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.655<-13177 Statuses=0008 0009 11:33:11 Msec=4500 True Az=112.995 Ze=-17.655 Az status=0008 Ze status=0009 11:33:11 Check angles 11:33:11 SkyScan query 11:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=3.315<-11779 Statuses=0008 0009 11:33:12 Msec=5250 True Az=112.995 Ze=3.315 Az status=0008 Ze status=0009 11:33:12 Check angles 11:33:12 SkyScan query 11:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:33:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:33:13 Message to Master queued w/err=0: serial=49941 error=0 11:33:18 Received message from Master: op=Filter serial=49942 11:33:18 Color wheel filter change from 0 to 0 11:33:18 FLIGetFilterPos err=0 currentPosition=0 11:33:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:18 Filter is already there-color wheel unchanged 11:33:18 Received message from Master: op=Shutter serial=49943 11:33:18 Shutter LASER close 11:33:18 Received message from Camera: op=State serial=49945 11:33:18 GetSingleValue result=40 Value=cccccccc 11:33:18 SkyScan query 11:33:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:33:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:19 Parameters OK 11:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:19 Set A/D data flow result=40 11:33:19 Set A/D channel type result=40 11:33:19 Set A/D encoding result=40 11:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:19 Set channel filter=0.000000e+000 result=40 11:33:19 Config A/D Result=40 11:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:19 Get A/D filter: -9.255963e+061 result=40 11:33:19 Get A/D value=-858993460 result=40 11:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:19 Parameters OK 11:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:19 Set A/D data flow result=40 11:33:19 Set A/D channel type result=40 11:33:19 Set A/D encoding result=40 11:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:19 Set channel filter=0.000000e+000 result=40 11:33:19 Config A/D Result=40 11:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:19 Get A/D filter: -9.255963e+061 result=40 11:33:19 Get A/D value=-858993460 result=40 11:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:19 Aux= 11:33:19 Message to Camera, serial 49945 queued 11:33:38 Received message from Master: op=Identify serial=49946 11:33:55 Received message from Master: op=PointingHead serial=49961 11:33:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:33:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:33:56 Point started: ret=0 11:33:56 point_skyscan result=0 11:33:57 Check angles 11:33:57 SkyScan query 11:33:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:33:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:33:57 Message to Master queued w/err=0: serial=49961 error=0 11:34:02 Received message from Master: op=Filter serial=49962 11:34:02 Color wheel filter change from 0 to 0 11:34:02 FLIGetFilterPos err=0 currentPosition=0 11:34:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:02 Filter is already there-color wheel unchanged 11:34:02 Received message from Master: op=Shutter serial=49963 11:34:02 Shutter LASER close 11:34:02 Received message from Camera: op=State serial=49965 11:34:02 GetSingleValue result=40 Value=cccccccc 11:34:02 SkyScan query 11:34:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:34:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:03 Parameters OK 11:34:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:03 Set A/D data flow result=40 11:34:03 Set A/D channel type result=40 11:34:03 Set A/D encoding result=40 11:34:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:03 Set channel filter=0.000000e+000 result=40 11:34:03 Config A/D Result=40 11:34:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:03 Get A/D filter: -9.255963e+061 result=40 11:34:03 Get A/D value=-858993460 result=40 11:34:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:03 Parameters OK 11:34:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:03 Set A/D data flow result=40 11:34:03 Set A/D channel type result=40 11:34:03 Set A/D encoding result=40 11:34:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:03 Set channel filter=0.000000e+000 result=40 11:34:03 Config A/D Result=40 11:34:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:03 Get A/D filter: -9.255963e+061 result=40 11:34:03 Get A/D value=-858993460 result=40 11:34:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:03 Aux= 11:34:03 Message to Camera, serial 49965 queued 11:34:40 Received message from Master: op=PointingHead serial=49978 11:34:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:34:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:34:40 Point started: ret=0 11:34:40 point_skyscan result=0 11:34:41 Check angles 11:34:41 SkyScan query 11:34:41 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 11:34:41 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 11:34:42 Check angles 11:34:42 SkyScan query [UTC 2019-3-1 11:34:42] 11:34:42 SkyScan query done: ret=0 az=153.315<-10221 ze=-6.495<-12433 Statuses=0009 0008 11:34:42 Msec=750 True Az=153.315 Ze=-6.495 Az status=0009 Ze status=0008 11:34:42 Check angles 11:34:42 SkyScan query 11:34:43 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 11:34:43 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 11:34:43 Check angles 11:34:43 SkyScan query 11:34:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:34:44 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:34:44 Message to Master queued w/err=0: serial=49978 error=0 11:34:49 Received message from Master: op=Filter serial=49979 11:34:49 Color wheel filter change from 0 to 0 11:34:49 FLIGetFilterPos err=0 currentPosition=0 11:34:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:49 Filter is already there-color wheel unchanged 11:34:49 Received message from Master: op=Shutter serial=49980 11:34:49 Shutter LASER close 11:34:49 Received message from Camera: op=State serial=49982 11:34:49 GetSingleValue result=40 Value=cccccccc 11:34:49 SkyScan query 11:34:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:34:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:49 Parameters OK 11:34:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:49 Set A/D data flow result=40 11:34:49 Set A/D channel type result=40 11:34:49 Set A/D encoding result=40 11:34:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:49 Set channel filter=0.000000e+000 result=40 11:34:49 Config A/D Result=40 11:34:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:49 Get A/D filter: -9.255963e+061 result=40 11:34:49 Get A/D value=-858993460 result=40 11:34:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:49 Parameters OK 11:34:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:49 Set A/D data flow result=40 11:34:49 Set A/D channel type result=40 11:34:49 Set A/D encoding result=40 11:34:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:49 Set channel filter=0.000000e+000 result=40 11:34:49 Config A/D Result=40 11:34:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:49 Get A/D filter: -9.255963e+061 result=40 11:34:49 Get A/D value=-858993460 result=40 11:34:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:49 Aux= 11:34:49 Message to Camera, serial 49982 queued 11:35:26 Received message from Master: op=PointingHead serial=49995 11:35:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:35:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:35:27 Point started: ret=0 11:35:27 point_skyscan result=0 11:35:27 Check angles 11:35:27 SkyScan query 11:35:28 SkyScan query done: ret=0 az=152.67<-10178 ze=6.51<-11566 Statuses=0009 0008 11:35:28 Msec=0 True Az=152.67 Ze=6.51 Az status=0009 Ze status=0008 11:35:28 Check angles 11:35:28 SkyScan query 11:35:29 SkyScan query done: ret=0 az=135.24<-9016 ze=6.495<-11567 Statuses=0009 0008 11:35:29 Msec=750 True Az=135.24 Ze=6.495 Az status=0009 Ze status=0008 11:35:29 Check angles 11:35:29 SkyScan query 11:35:29 SkyScan query done: ret=0 az=117.75<-7850 ze=6.495<-11567 Statuses=0009 0008 11:35:29 Msec=1500 True Az=117.75 Ze=6.495 Az status=0009 Ze status=0008 11:35:30 Check angles 11:35:30 SkyScan query 11:35:30 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 11:35:30 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 11:35:30 Message to Master queued w/err=0: serial=49995 error=0 11:35:35 Received message from Master: op=Filter serial=49996 11:35:35 Color wheel filter change from 0 to 0 11:35:35 FLIGetFilterPos err=0 currentPosition=0 11:35:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:35 Filter is already there-color wheel unchanged 11:35:35 Received message from Master: op=Shutter serial=49997 11:35:35 Shutter LASER close 11:35:35 Received message from Camera: op=State serial=49999 11:35:35 GetSingleValue result=40 Value=cccccccc 11:35:35 SkyScan query 11:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:35:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:36 Parameters OK 11:35:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:36 Set A/D data flow result=40 11:35:36 Set A/D channel type result=40 11:35:36 Set A/D encoding result=40 11:35:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:36 Set channel filter=0.000000e+000 result=40 11:35:36 Config A/D Result=40 11:35:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:36 Get A/D filter: -9.255963e+061 result=40 11:35:36 Get A/D value=-858993460 result=40 11:35:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:36 Parameters OK 11:35:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:36 Set A/D data flow result=40 11:35:36 Set A/D channel type result=40 11:35:36 Set A/D encoding result=40 11:35:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:36 Set channel filter=0.000000e+000 result=40 11:35:36 Config A/D Result=40 11:35:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:36 Get A/D filter: -9.255963e+061 result=40 11:35:36 Get A/D value=-858993460 result=40 11:35:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:36 Aux= 11:35:36 Message to Camera, serial 49999 queued 11:36:13 Received message from Master: op=PointingHead serial=50012 11:36:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:36:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:36:13 Point started: ret=0 11:36:13 point_skyscan result=0 11:36:14 Check angles 11:36:14 SkyScan query 11:36:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 11:36:15 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 11:36:15 Check angles 11:36:15 SkyScan query 11:36:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 11:36:15 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 11:36:15 Check angles 11:36:15 SkyScan query 11:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 11:36:16 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 11:36:16 Check angles 11:36:16 SkyScan query 11:36:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.355<-17757 Statuses=0008 0009 11:36:17 Msec=2250 True Az=112.995 Ze=-86.355 Az status=0008 Ze status=0009 11:36:17 Check angles 11:36:17 SkyScan query 11:36:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 11:36:18 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 11:36:18 Check angles 11:36:18 SkyScan query 11:36:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.25<-20550 Statuses=0008 0009 11:36:18 Msec=3750 True Az=112.995 Ze=-128.25 Az status=0008 Ze status=0009 11:36:18 Check angles 11:36:18 SkyScan query 11:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.205<-21947 Statuses=0008 0009 11:36:19 Msec=4500 True Az=112.995 Ze=-149.205 Az status=0008 Ze status=0009 11:36:19 Check angles 11:36:19 SkyScan query 11:36:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 11:36:20 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 11:36:20 Check angles 11:36:20 SkyScan query 11:36:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:36:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:36:21 Message to Master queued w/err=0: serial=50012 error=0 11:36:26 Received message from Master: op=Filter serial=50013 11:36:26 Color wheel filter change from 0 to 0 11:36:26 FLIGetFilterPos err=0 currentPosition=0 11:36:26 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:26 Filter is already there-color wheel unchanged 11:36:26 Received message from Master: op=Shutter serial=50014 11:36:26 Shutter LASER open 11:36:26 Received message from Camera: op=State serial=50016 11:36:26 GetSingleValue result=40 Value=cccccccc 11:36:26 SkyScan query 11:36:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:36:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:26 Parameters OK 11:36:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:26 Set A/D data flow result=40 11:36:26 Set A/D channel type result=40 11:36:26 Set A/D encoding result=40 11:36:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:26 Set channel filter=0.000000e+000 result=40 11:36:26 Config A/D Result=40 11:36:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:26 Get A/D filter: -9.255963e+061 result=40 11:36:26 Get A/D value=-858993460 result=40 11:36:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:26 Parameters OK 11:36:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:26 Set A/D data flow result=40 11:36:26 Set A/D channel type result=40 11:36:26 Set A/D encoding result=40 11:36:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:26 Set channel filter=0.000000e+000 result=40 11:36:26 Config A/D Result=40 11:36:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:26 Get A/D filter: -9.255963e+061 result=40 11:36:26 Get A/D value=-858993460 result=40 11:36:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:26 Aux= 11:36:26 Message to Camera, serial 50016 queued 11:36:34 Received message from Master: op=Shutter serial=50025 11:36:34 Shutter LASER close 11:36:34 Received message from Master: op=PointingHead serial=50029 11:36:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:36:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:36:35 Point started: ret=0 11:36:35 point_skyscan result=0 11:36:36 Check angles 11:36:36 SkyScan query 11:36:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.905<-21527 Statuses=0008 0009 11:36:36 Msec=0 True Az=112.995 Ze=-142.905 Az status=0008 Ze status=0009 11:36:36 Check angles 11:36:36 SkyScan query 11:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.92<-20128 Statuses=0008 0009 11:36:37 Msec=750 True Az=112.995 Ze=-121.92 Az status=0008 Ze status=0009 11:36:37 Check angles 11:36:37 SkyScan query 11:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.995<-18733 Statuses=0008 0009 11:36:38 Msec=1500 True Az=112.995 Ze=-100.995 Az status=0008 Ze status=0009 11:36:38 Check angles 11:36:38 SkyScan query 11:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.62<-17308 Statuses=0008 0009 11:36:38 Msec=2250 True Az=112.995 Ze=-79.62 Az status=0008 Ze status=0009 11:36:39 Check angles 11:36:39 SkyScan query 11:36:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.17<-15878 Statuses=0008 0009 11:36:39 Msec=3000 True Az=112.995 Ze=-58.17 Az status=0008 Ze status=0009 11:36:39 Check angles 11:36:39 SkyScan query 11:36:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.26<-14484 Statuses=0008 0009 11:36:40 Msec=3750 True Az=112.995 Ze=-37.26 Az status=0008 Ze status=0009 11:36:40 Check angles 11:36:40 SkyScan query 11:36:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.855<-13057 Statuses=0008 0009 11:36:41 Msec=4500 True Az=112.995 Ze=-15.855 Az status=0008 Ze status=0009 11:36:41 Check angles 11:36:41 SkyScan query 11:36:41 SkyScan query done: ret=0 az=112.995<-7533 ze=5.16<-11656 Statuses=0008 0009 11:36:41 Msec=5250 True Az=112.995 Ze=5.16 Az status=0008 Ze status=0009 11:36:42 Check angles 11:36:42 SkyScan query 11:36:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:36:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:36:42 Message to Master queued w/err=0: serial=50029 error=0 11:36:47 Received message from Master: op=Filter serial=50030 11:36:47 Color wheel filter change from 0 to 0 11:36:47 FLIGetFilterPos err=0 currentPosition=0 11:36:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:47 Filter is already there-color wheel unchanged 11:36:47 Received message from Master: op=Shutter serial=50031 11:36:47 Shutter LASER close 11:36:48 Received message from Camera: op=State serial=50033 11:36:48 GetSingleValue result=40 Value=cccccccc 11:36:48 SkyScan query 11:36:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:36:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:48 Parameters OK 11:36:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:48 Set A/D data flow result=40 11:36:48 Set A/D channel type result=40 11:36:48 Set A/D encoding result=40 11:36:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:48 Set channel filter=0.000000e+000 result=40 11:36:48 Config A/D Result=40 11:36:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:48 Get A/D filter: -9.255963e+061 result=40 11:36:48 Get A/D value=-858993460 result=40 11:36:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:48 Parameters OK 11:36:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:48 Set A/D data flow result=40 11:36:48 Set A/D channel type result=40 11:36:48 Set A/D encoding result=40 11:36:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:48 Set channel filter=0.000000e+000 result=40 11:36:48 Config A/D Result=40 11:36:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:48 Get A/D filter: -9.255963e+061 result=40 11:36:48 Get A/D value=-858993460 result=40 11:36:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:48 Aux= 11:36:48 Message to Camera, serial 50033 queued 11:37:25 Received message from Master: op=PointingHead serial=50046 11:37:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:37:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:37:25 Point started: ret=0 11:37:25 point_skyscan result=0 11:37:26 Check angles 11:37:26 SkyScan query 11:37:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:37:27 Message to Master queued w/err=0: serial=50046 error=0 11:37:32 Received message from Master: op=Filter serial=50047 11:37:32 Color wheel filter change from 0 to 0 11:37:32 FLIGetFilterPos err=0 currentPosition=0 11:37:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:32 Filter is already there-color wheel unchanged 11:37:32 Received message from Master: op=Shutter serial=50048 11:37:32 Shutter LASER close 11:37:32 Received message from Camera: op=State serial=50050 11:37:32 GetSingleValue result=40 Value=cccccccc 11:37:32 SkyScan query 11:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:32 Parameters OK 11:37:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:32 Set A/D data flow result=40 11:37:32 Set A/D channel type result=40 11:37:32 Set A/D encoding result=40 11:37:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:32 Set channel filter=0.000000e+000 result=40 11:37:32 Config A/D Result=40 11:37:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:32 Get A/D filter: -9.255963e+061 result=40 11:37:32 Get A/D value=-858993460 result=40 11:37:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:32 Parameters OK 11:37:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:32 Set A/D data flow result=40 11:37:32 Set A/D channel type result=40 11:37:32 Set A/D encoding result=40 11:37:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:32 Set channel filter=0.000000e+000 result=40 11:37:32 Config A/D Result=40 11:37:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:32 Get A/D filter: -9.255963e+061 result=40 11:37:32 Get A/D value=-858993460 result=40 11:37:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:32 Aux= 11:37:32 Message to Camera, serial 50050 queued 11:38:09 Received message from Master: op=PointingHead serial=50063 11:38:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:38:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:38:10 Point started: ret=0 11:38:10 point_skyscan result=0 11:38:10 Check angles 11:38:10 SkyScan query 11:38:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:38:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:38:11 Message to Master queued w/err=0: serial=50063 error=0 11:38:16 Received message from Master: op=Filter serial=50064 11:38:16 Color wheel filter change from 0 to 0 11:38:16 FLIGetFilterPos err=0 currentPosition=0 11:38:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:16 Filter is already there-color wheel unchanged 11:38:16 Received message from Master: op=Shutter serial=50065 11:38:16 Shutter LASER close 11:38:16 Received message from Camera: op=State serial=50067 11:38:16 GetSingleValue result=40 Value=cccccccc 11:38:16 SkyScan query 11:38:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:38:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:17 Parameters OK 11:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:17 Set A/D data flow result=40 11:38:17 Set A/D channel type result=40 11:38:17 Set A/D encoding result=40 11:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:17 Set channel filter=0.000000e+000 result=40 11:38:17 Config A/D Result=40 11:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:17 Get A/D filter: -9.255963e+061 result=40 11:38:17 Get A/D value=-858993460 result=40 11:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:17 Parameters OK 11:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:17 Set A/D data flow result=40 11:38:17 Set A/D channel type result=40 11:38:17 Set A/D encoding result=40 11:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:17 Set channel filter=0.000000e+000 result=40 11:38:17 Config A/D Result=40 11:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:17 Get A/D filter: -9.255963e+061 result=40 11:38:17 Get A/D value=-858993460 result=40 11:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:17 Aux= 11:38:17 Message to Camera, serial 50067 queued 11:38:54 Received message from Master: op=PointingHead serial=50080 11:38:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:38:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:38:54 Point started: ret=0 11:38:54 point_skyscan result=0 11:38:55 Check angles 11:38:55 SkyScan query 11:38:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:38:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:38:55 Message to Master queued w/err=0: serial=50080 error=0 11:39:00 Received message from Master: op=Filter serial=50081 11:39:00 Color wheel filter change from 0 to 0 11:39:00 FLIGetFilterPos err=0 currentPosition=0 11:39:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:00 Filter is already there-color wheel unchanged 11:39:01 Received message from Master: op=Shutter serial=50082 11:39:01 Shutter LASER close 11:39:01 Received message from Camera: op=State serial=50084 11:39:01 GetSingleValue result=40 Value=cccccccc 11:39:01 SkyScan query 11:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:39:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:01 Parameters OK 11:39:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:01 Set A/D data flow result=40 11:39:01 Set A/D channel type result=40 11:39:01 Set A/D encoding result=40 11:39:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:01 Set channel filter=0.000000e+000 result=40 11:39:01 Config A/D Result=40 11:39:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:01 Get A/D filter: -9.255963e+061 result=40 11:39:01 Get A/D value=-858993460 result=40 11:39:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:01 Parameters OK 11:39:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:01 Set A/D data flow result=40 11:39:01 Set A/D channel type result=40 11:39:01 Set A/D encoding result=40 11:39:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:01 Set channel filter=0.000000e+000 result=40 11:39:01 Config A/D Result=40 11:39:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:01 Get A/D filter: -9.255963e+061 result=40 11:39:01 Get A/D value=-858993460 result=40 11:39:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:01 Aux= 11:39:01 Message to Camera, serial 50084 queued 11:39:38 Received message from Master: op=PointingHead serial=50097 11:39:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:39:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:39:38 Point started: ret=0 11:39:38 point_skyscan result=0 11:39:39 Check angles 11:39:39 SkyScan query 11:39:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 11:39:40 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 11:39:40 Check angles 11:39:40 SkyScan query 11:39:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.135<-15009 Statuses=0008 0009 11:39:40 Msec=750 True Az=112.995 Ze=-45.135 Az status=0008 Ze status=0009 11:39:41 Check angles 11:39:41 SkyScan query 11:39:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.075<-16405 Statuses=0008 0009 11:39:41 Msec=1500 True Az=112.995 Ze=-66.075 Az status=0008 Ze status=0009 11:39:41 Check angles 11:39:41 SkyScan query 11:39:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.03<-17802 Statuses=0008 0009 11:39:42 Msec=2250 True Az=112.995 Ze=-87.03 Az status=0008 Ze status=0009 11:39:42 Check angles 11:39:42 SkyScan query 11:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 11:39:43 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 11:39:43 Check angles 11:39:43 SkyScan query 11:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 11:39:43 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 11:39:44 Check angles 11:39:44 SkyScan query 11:39:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.88<-21992 Statuses=0008 0009 11:39:44 Msec=4500 True Az=112.995 Ze=-149.88 Az status=0008 Ze status=0009 11:39:44 Check angles 11:39:44 SkyScan query 11:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.76<-23384 Statuses=0008 0009 11:39:45 Msec=5250 True Az=112.995 Ze=-170.76 Az status=0008 Ze status=0009 11:39:45 Check angles 11:39:45 SkyScan query 11:39:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:39:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:39:46 Message to Master queued w/err=0: serial=50097 error=0 11:39:51 Received message from Master: op=Filter serial=50098 11:39:51 Color wheel filter change from 0 to 0 11:39:51 FLIGetFilterPos err=0 currentPosition=0 11:39:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:51 Filter is already there-color wheel unchanged 11:39:51 Received message from Master: op=Shutter serial=50099 11:39:51 Shutter LASER open 11:39:51 Received message from Camera: op=State serial=50101 11:39:51 GetSingleValue result=40 Value=cccccccc 11:39:51 SkyScan query 11:39:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:39:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:52 Parameters OK 11:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:52 Set A/D data flow result=40 11:39:52 Set A/D channel type result=40 11:39:52 Set A/D encoding result=40 11:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:52 Set channel filter=0.000000e+000 result=40 11:39:52 Config A/D Result=40 11:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:52 Get A/D filter: -9.255963e+061 result=40 11:39:52 Get A/D value=-858993460 result=40 11:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:52 Parameters OK 11:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:52 Set A/D data flow result=40 11:39:52 Set A/D channel type result=40 11:39:52 Set A/D encoding result=40 11:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:52 Set channel filter=0.000000e+000 result=40 11:39:52 Config A/D Result=40 11:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:52 Get A/D filter: -9.255963e+061 result=40 11:39:52 Get A/D value=-858993460 result=40 11:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:52 Aux= 11:39:52 Message to Camera, serial 50101 queued 11:40:00 Received message from Master: op=Shutter serial=50111 11:40:00 Shutter LASER close 11:40:01 Received message from Master: op=PointingHead serial=50115 11:40:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:40:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:40:01 Point started: ret=0 11:40:01 point_skyscan result=0 11:40:02 Check angles 11:40:02 SkyScan query 11:40:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 11:40:02 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 11:40:02 Check angles 11:40:02 SkyScan query 11:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 11:40:03 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 11:40:03 Check angles 11:40:03 SkyScan query 11:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 11:40:04 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 11:40:04 Check angles 11:40:04 SkyScan query 11:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.25<-17350 Statuses=0008 0009 11:40:05 Msec=2250 True Az=112.995 Ze=-80.25 Az status=0008 Ze status=0009 11:40:05 Check angles 11:40:05 SkyScan query 11:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 11:40:05 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 11:40:05 Check angles 11:40:05 SkyScan query 11:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.31<-14554 Statuses=0008 0009 11:40:06 Msec=3750 True Az=112.995 Ze=-38.31 Az status=0008 Ze status=0009 11:40:06 Check angles 11:40:06 SkyScan query 11:40:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.37<-13158 Statuses=0008 0009 11:40:07 Msec=4500 True Az=112.995 Ze=-17.37 Az status=0008 Ze status=0009 11:40:07 Check angles 11:40:07 SkyScan query 11:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=3.585<-11761 Statuses=0008 0009 11:40:08 Msec=5250 True Az=112.995 Ze=3.585 Az status=0008 Ze status=0009 11:40:08 Check angles 11:40:08 SkyScan query 11:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:40:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:40:08 Message to Master queued w/err=0: serial=50115 error=0 11:40:13 Received message from Master: op=Filter serial=50116 11:40:13 Color wheel filter change from 0 to 0 11:40:13 FLIGetFilterPos err=0 currentPosition=0 11:40:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:13 Filter is already there-color wheel unchanged 11:40:13 Received message from Master: op=Shutter serial=50117 11:40:13 Shutter LASER close 11:40:14 Received message from Camera: op=State serial=50119 11:40:14 GetSingleValue result=40 Value=cccccccc 11:40:14 SkyScan query 11:40:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:40:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:14 Parameters OK 11:40:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:14 Set A/D data flow result=40 11:40:14 Set A/D channel type result=40 11:40:14 Set A/D encoding result=40 11:40:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:14 Set channel filter=0.000000e+000 result=40 11:40:14 Config A/D Result=40 11:40:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:14 Get A/D filter: -9.255963e+061 result=40 11:40:14 Get A/D value=-858993460 result=40 11:40:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:14 Parameters OK 11:40:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:14 Set A/D data flow result=40 11:40:14 Set A/D channel type result=40 11:40:14 Set A/D encoding result=40 11:40:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:14 Set channel filter=0.000000e+000 result=40 11:40:14 Config A/D Result=40 11:40:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:14 Get A/D filter: -9.255963e+061 result=40 11:40:14 Get A/D value=-858993460 result=40 11:40:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:14 Aux= 11:40:14 Message to Camera, serial 50119 queued 11:40:51 Received message from Master: op=PointingHead serial=50132 11:40:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:40:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:40:51 Point started: ret=0 11:40:51 point_skyscan result=0 11:40:52 Check angles 11:40:52 SkyScan query 11:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:40:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:40:53 Message to Master queued w/err=0: serial=50132 error=0 11:40:58 Received message from Master: op=Filter serial=50133 11:40:58 Color wheel filter change from 0 to 0 11:40:58 FLIGetFilterPos err=0 currentPosition=0 11:40:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:58 Filter is already there-color wheel unchanged 11:40:58 Received message from Master: op=Shutter serial=50134 11:40:58 Shutter LASER close 11:40:58 Received message from Camera: op=State serial=50136 11:40:58 GetSingleValue result=40 Value=cccccccc 11:40:58 SkyScan query 11:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:40:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:59 Parameters OK 11:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:59 Set A/D data flow result=40 11:40:59 Set A/D channel type result=40 11:40:59 Set A/D encoding result=40 11:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:59 Set channel filter=0.000000e+000 result=40 11:40:59 Config A/D Result=40 11:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:59 Get A/D filter: -9.255963e+061 result=40 11:40:59 Get A/D value=-858993460 result=40 11:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:59 Parameters OK 11:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:59 Set A/D data flow result=40 11:40:59 Set A/D channel type result=40 11:40:59 Set A/D encoding result=40 11:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:59 Set channel filter=0.000000e+000 result=40 11:40:59 Config A/D Result=40 11:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:59 Get A/D filter: -9.255963e+061 result=40 11:40:59 Get A/D value=-858993460 result=40 11:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:59 Aux= 11:40:59 Message to Camera, serial 50136 queued 11:41:35 Received message from Master: op=PointingHead serial=50149 11:41:35 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:41:35 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:41:36 Point started: ret=0 11:41:36 point_skyscan result=0 11:41:36 Check angles 11:41:36 SkyScan query 11:41:37 SkyScan query done: ret=0 az=135.72<-9048 ze=-6.51<-12434 Statuses=0009 0008 11:41:37 Msec=0 True Az=135.72 Ze=-6.51 Az status=0009 Ze status=0008 11:41:37 Check angles 11:41:37 SkyScan query 11:41:38 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.495<-12433 Statuses=0009 0008 11:41:38 Msec=750 True Az=153.6 Ze=-6.495 Az status=0009 Ze status=0008 11:41:38 Check angles 11:41:38 SkyScan query 11:41:39 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 11:41:39 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 11:41:39 Check angles 11:41:39 SkyScan query 11:41:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:41:39 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:41:39 Message to Master queued w/err=0: serial=50149 error=0 11:41:44 Received message from Master: op=Filter serial=50150 11:41:44 Color wheel filter change from 0 to 0 11:41:44 FLIGetFilterPos err=0 currentPosition=0 11:41:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:44 Filter is already there-color wheel unchanged 11:41:44 Received message from Master: op=Shutter serial=50151 11:41:44 Shutter LASER close 11:41:45 Received message from Camera: op=State serial=50153 11:41:45 GetSingleValue result=40 Value=cccccccc 11:41:45 SkyScan query 11:41:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:41:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:45 Parameters OK 11:41:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:45 Set A/D data flow result=40 11:41:45 Set A/D channel type result=40 11:41:45 Set A/D encoding result=40 11:41:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:45 Set channel filter=0.000000e+000 result=40 11:41:45 Config A/D Result=40 11:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:45 Get A/D filter: -9.255963e+061 result=40 11:41:45 Get A/D value=-858993460 result=40 11:41:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:45 Parameters OK 11:41:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:45 Set A/D data flow result=40 11:41:45 Set A/D channel type result=40 11:41:45 Set A/D encoding result=40 11:41:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:45 Set channel filter=0.000000e+000 result=40 11:41:45 Config A/D Result=40 11:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:45 Get A/D filter: -9.255963e+061 result=40 11:41:45 Get A/D value=-858993460 result=40 11:41:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:45 Aux= 11:41:45 Message to Camera, serial 50153 queued 11:42:22 Received message from Master: op=PointingHead serial=50166 11:42:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:42:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:42:22 Point started: ret=0 11:42:22 point_skyscan result=0 11:42:23 Check angles 11:42:23 SkyScan query 11:42:24 SkyScan query done: ret=0 az=152.67<-10178 ze=6.51<-11566 Statuses=0009 0008 11:42:24 Msec=0 True Az=152.67 Ze=6.51 Az status=0009 Ze status=0008 11:42:24 Check angles 11:42:24 SkyScan query 11:42:24 SkyScan query done: ret=0 az=135.21<-9014 ze=6.495<-11567 Statuses=0009 0008 11:42:24 Msec=750 True Az=135.21 Ze=6.495 Az status=0009 Ze status=0008 11:42:25 Check angles 11:42:25 SkyScan query 11:42:25 SkyScan query done: ret=0 az=117.315<-7821 ze=6.495<-11567 Statuses=0009 0008 11:42:25 Msec=1500 True Az=117.315 Ze=6.495 Az status=0009 Ze status=0008 11:42:25 Check angles 11:42:25 SkyScan query 11:42:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:42:26 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:42:26 Message to Master queued w/err=0: serial=50166 error=0 11:42:31 Received message from Master: op=Filter serial=50167 11:42:31 Color wheel filter change from 0 to 0 11:42:31 FLIGetFilterPos err=0 currentPosition=0 11:42:31 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:31 Filter is already there-color wheel unchanged 11:42:31 Received message from Master: op=Shutter serial=50168 11:42:31 Shutter LASER close 11:42:31 Received message from Camera: op=State serial=50170 11:42:31 GetSingleValue result=40 Value=cccccccc 11:42:31 SkyScan query 11:42:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:42:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:32 Parameters OK 11:42:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:32 Set A/D data flow result=40 11:42:32 Set A/D channel type result=40 11:42:32 Set A/D encoding result=40 11:42:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:32 Set channel filter=0.000000e+000 result=40 11:42:32 Config A/D Result=40 11:42:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:32 Get A/D filter: -9.255963e+061 result=40 11:42:32 Get A/D value=-858993460 result=40 11:42:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:32 Parameters OK 11:42:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:32 Set A/D data flow result=40 11:42:32 Set A/D channel type result=40 11:42:32 Set A/D encoding result=40 11:42:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:32 Set channel filter=0.000000e+000 result=40 11:42:32 Config A/D Result=40 11:42:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:32 Get A/D filter: -9.255963e+061 result=40 11:42:32 Get A/D value=-858993460 result=40 11:42:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:32 Aux= 11:42:32 Message to Camera, serial 50170 queued 11:43:08 Received message from Master: op=PointingHead serial=50183 11:43:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:43:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:43:09 Point started: ret=0 11:43:09 point_skyscan result=0 11:43:10 Check angles 11:43:10 SkyScan query 11:43:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 11:43:10 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 11:43:10 Check angles 11:43:10 SkyScan query 11:43:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.61<-14974 Statuses=0008 0009 11:43:11 Msec=750 True Az=112.995 Ze=-44.61 Az status=0008 Ze status=0009 11:43:11 Check angles 11:43:11 SkyScan query 11:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 11:43:12 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 11:43:12 Check angles 11:43:12 SkyScan query 11:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 11:43:12 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 11:43:13 Check angles 11:43:13 SkyScan query 11:43:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.46<-19164 Statuses=0008 0009 11:43:13 Msec=3000 True Az=112.995 Ze=-107.46 Az status=0008 Ze status=0009 11:43:13 Check angles 11:43:13 SkyScan query 11:43:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.4<-20560 Statuses=0008 0009 11:43:14 Msec=3750 True Az=112.995 Ze=-128.4 Az status=0008 Ze status=0009 11:43:14 Check angles 11:43:14 SkyScan query 11:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.37<-21958 Statuses=0008 0009 11:43:15 Msec=4500 True Az=112.995 Ze=-149.37 Az status=0008 Ze status=0009 11:43:15 Check angles 11:43:15 SkyScan query 11:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.7<-23380 Statuses=0008 0009 11:43:15 Msec=5250 True Az=112.995 Ze=-170.7 Az status=0008 Ze status=0009 11:43:16 Check angles 11:43:16 SkyScan query 11:43:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:43:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:43:16 Message to Master queued w/err=0: serial=50183 error=0 11:43:21 Received message from Master: op=Filter serial=50184 11:43:21 Color wheel filter change from 0 to 0 11:43:21 FLIGetFilterPos err=0 currentPosition=0 11:43:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:21 Filter is already there-color wheel unchanged 11:43:21 Received message from Master: op=Shutter serial=50185 11:43:21 Shutter LASER open 11:43:22 Received message from Camera: op=State serial=50187 11:43:22 GetSingleValue result=40 Value=cccccccc 11:43:22 SkyScan query 11:43:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:43:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:22 Parameters OK 11:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:22 Set A/D data flow result=40 11:43:22 Set A/D channel type result=40 11:43:22 Set A/D encoding result=40 11:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:22 Set channel filter=0.000000e+000 result=40 11:43:22 Config A/D Result=40 11:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:22 Get A/D filter: -9.255963e+061 result=40 11:43:22 Get A/D value=-858993460 result=40 11:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:22 Parameters OK 11:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:22 Set A/D data flow result=40 11:43:22 Set A/D channel type result=40 11:43:22 Set A/D encoding result=40 11:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:22 Set channel filter=0.000000e+000 result=40 11:43:22 Config A/D Result=40 11:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:22 Get A/D filter: -9.255963e+061 result=40 11:43:22 Get A/D value=-858993460 result=40 11:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:22 Aux= 11:43:22 Message to Camera, serial 50187 queued 11:43:31 Received message from Master: op=Shutter serial=50197 11:43:31 Shutter LASER close 11:43:31 Received message from Master: op=PointingHead serial=50201 11:43:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:43:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:43:31 Point started: ret=0 11:43:31 point_skyscan result=0 11:43:32 Check angles 11:43:32 SkyScan query 11:43:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 11:43:33 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 11:43:33 Check angles 11:43:33 SkyScan query 11:43:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 11:43:33 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 11:43:34 Check angles 11:43:34 SkyScan query 11:43:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 11:43:34 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 11:43:34 Check angles 11:43:34 SkyScan query 11:43:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 11:43:35 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 11:43:35 Check angles 11:43:35 SkyScan query 11:43:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 11:43:36 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 11:43:36 Check angles 11:43:36 SkyScan query 11:43:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 11:43:36 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 11:43:37 Check angles 11:43:37 SkyScan query 11:43:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 11:43:37 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 11:43:37 Check angles 11:43:37 SkyScan query 11:43:38 SkyScan query done: ret=0 az=112.995<-7533 ze=4.455<-11703 Statuses=0008 0009 11:43:38 Msec=5250 True Az=112.995 Ze=4.455 Az status=0008 Ze status=0009 11:43:38 Check angles 11:43:38 SkyScan query 11:43:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:43:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:43:39 Message to Master queued w/err=0: serial=50201 error=0 11:43:44 Received message from Master: op=Filter serial=50202 11:43:44 Color wheel filter change from 0 to 0 11:43:44 FLIGetFilterPos err=0 currentPosition=0 11:43:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:44 Filter is already there-color wheel unchanged 11:43:44 Received message from Master: op=Shutter serial=50203 11:43:44 Shutter LASER close 11:43:44 Received message from Camera: op=State serial=50205 11:43:44 GetSingleValue result=40 Value=cccccccc 11:43:44 SkyScan query 11:43:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:43:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:45 Parameters OK 11:43:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:45 Set A/D data flow result=40 11:43:45 Set A/D channel type result=40 11:43:45 Set A/D encoding result=40 11:43:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:45 Set channel filter=0.000000e+000 result=40 11:43:45 Config A/D Result=40 11:43:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:45 Get A/D filter: -9.255963e+061 result=40 11:43:45 Get A/D value=-858993460 result=40 11:43:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:45 Parameters OK 11:43:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:45 Set A/D data flow result=40 11:43:45 Set A/D channel type result=40 11:43:45 Set A/D encoding result=40 11:43:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:45 Set channel filter=0.000000e+000 result=40 11:43:45 Config A/D Result=40 11:43:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:45 Get A/D filter: -9.255963e+061 result=40 11:43:45 Get A/D value=-858993460 result=40 11:43:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:45 Aux= 11:43:45 Message to Camera, serial 50205 queued [UTC 2019-3-1 11:43:50] 11:44:21 Received message from Master: op=PointingHead serial=50218 11:44:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:44:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:44:22 Point started: ret=0 11:44:22 point_skyscan result=0 11:44:22 Check angles 11:44:22 SkyScan query 11:44:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:44:23 Message to Master queued w/err=0: serial=50218 error=0 11:44:28 Received message from Master: op=Filter serial=50219 11:44:28 Color wheel filter change from 0 to 0 11:44:28 FLIGetFilterPos err=0 currentPosition=0 11:44:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:28 Filter is already there-color wheel unchanged 11:44:28 Received message from Master: op=Shutter serial=50220 11:44:28 Shutter LASER close 11:44:28 Received message from Camera: op=State serial=50222 11:44:28 GetSingleValue result=40 Value=cccccccc 11:44:28 SkyScan query 11:44:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:29 Parameters OK 11:44:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:29 Set A/D data flow result=40 11:44:29 Set A/D channel type result=40 11:44:29 Set A/D encoding result=40 11:44:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:29 Set channel filter=0.000000e+000 result=40 11:44:29 Config A/D Result=40 11:44:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:29 Get A/D filter: -9.255963e+061 result=40 11:44:29 Get A/D value=-858993460 result=40 11:44:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:29 Parameters OK 11:44:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:29 Set A/D data flow result=40 11:44:29 Set A/D channel type result=40 11:44:29 Set A/D encoding result=40 11:44:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:29 Set channel filter=0.000000e+000 result=40 11:44:29 Config A/D Result=40 11:44:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:29 Get A/D filter: -9.255963e+061 result=40 11:44:29 Get A/D value=-858993460 result=40 11:44:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:29 Aux= 11:44:29 Message to Camera, serial 50222 queued 11:45:06 Received message from Master: op=PointingHead serial=50235 11:45:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:45:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:45:06 Point started: ret=0 11:45:06 point_skyscan result=0 11:45:07 Check angles 11:45:07 SkyScan query 11:45:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:45:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:45:07 Message to Master queued w/err=0: serial=50235 error=0 11:45:12 Received message from Master: op=Filter serial=50236 11:45:12 Color wheel filter change from 0 to 0 11:45:12 FLIGetFilterPos err=0 currentPosition=0 11:45:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:12 Filter is already there-color wheel unchanged 11:45:13 Received message from Master: op=Shutter serial=50237 11:45:13 Shutter LASER close 11:45:13 Received message from Camera: op=State serial=50239 11:45:13 GetSingleValue result=40 Value=cccccccc 11:45:13 SkyScan query 11:45:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:45:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:13 Parameters OK 11:45:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:13 Set A/D data flow result=40 11:45:13 Set A/D channel type result=40 11:45:13 Set A/D encoding result=40 11:45:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:13 Set channel filter=0.000000e+000 result=40 11:45:13 Config A/D Result=40 11:45:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:13 Get A/D filter: -9.255963e+061 result=40 11:45:13 Get A/D value=-858993460 result=40 11:45:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:13 Parameters OK 11:45:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:13 Set A/D data flow result=40 11:45:13 Set A/D channel type result=40 11:45:13 Set A/D encoding result=40 11:45:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:13 Set channel filter=0.000000e+000 result=40 11:45:13 Config A/D Result=40 11:45:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:13 Get A/D filter: -9.255963e+061 result=40 11:45:13 Get A/D value=-858993460 result=40 11:45:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:13 Aux= 11:45:13 Message to Camera, serial 50239 queued 11:45:50 Received message from Master: op=PointingHead serial=50252 11:45:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:45:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:45:50 Point started: ret=0 11:45:50 point_skyscan result=0 11:45:51 Check angles 11:45:51 SkyScan query 11:45:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:45:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:45:52 Message to Master queued w/err=0: serial=50252 error=0 11:45:57 Received message from Master: op=Filter serial=50253 11:45:57 Color wheel filter change from 0 to 0 11:45:57 FLIGetFilterPos err=0 currentPosition=0 11:45:57 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:57 Filter is already there-color wheel unchanged 11:45:57 Received message from Master: op=Shutter serial=50254 11:45:57 Shutter LASER close 11:45:57 Received message from Camera: op=State serial=50256 11:45:57 GetSingleValue result=40 Value=cccccccc 11:45:57 SkyScan query 11:45:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:45:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:58 Parameters OK 11:45:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:58 Set A/D data flow result=40 11:45:58 Set A/D channel type result=40 11:45:58 Set A/D encoding result=40 11:45:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:58 Set channel filter=0.000000e+000 result=40 11:45:58 Config A/D Result=40 11:45:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:58 Get A/D filter: -9.255963e+061 result=40 11:45:58 Get A/D value=-858993460 result=40 11:45:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:58 Parameters OK 11:45:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:58 Set A/D data flow result=40 11:45:58 Set A/D channel type result=40 11:45:58 Set A/D encoding result=40 11:45:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:58 Set channel filter=0.000000e+000 result=40 11:45:58 Config A/D Result=40 11:45:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:58 Get A/D filter: -9.255963e+061 result=40 11:45:58 Get A/D value=-858993460 result=40 11:45:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:58 Aux= 11:45:58 Message to Camera, serial 50256 queued 11:46:34 Received message from Master: op=PointingHead serial=50269 11:46:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:46:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:46:35 Point started: ret=0 11:46:35 point_skyscan result=0 11:46:35 Check angles 11:46:35 SkyScan query 11:46:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 11:46:36 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 11:46:36 Check angles 11:46:36 SkyScan query 11:46:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 11:46:37 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 11:46:37 Check angles 11:46:37 SkyScan query 11:46:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 11:46:38 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 11:46:38 Check angles 11:46:38 SkyScan query 11:46:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 11:46:38 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 11:46:38 Check angles 11:46:38 SkyScan query 11:46:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 11:46:39 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 11:46:39 Check angles 11:46:39 SkyScan query 11:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.355<-20557 Statuses=0008 0009 11:46:40 Msec=3750 True Az=112.995 Ze=-128.355 Az status=0008 Ze status=0009 11:46:40 Check angles 11:46:40 SkyScan query 11:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.325<-21955 Statuses=0008 0009 11:46:41 Msec=4500 True Az=112.995 Ze=-149.325 Az status=0008 Ze status=0009 11:46:41 Check angles 11:46:41 SkyScan query 11:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 11:46:41 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 11:46:41 Check angles 11:46:41 SkyScan query 11:46:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:46:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:46:42 Message to Master queued w/err=0: serial=50269 error=0 11:46:47 Received message from Master: op=Filter serial=50270 11:46:47 Color wheel filter change from 0 to 0 11:46:47 FLIGetFilterPos err=0 currentPosition=0 11:46:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:47 Filter is already there-color wheel unchanged 11:46:47 Received message from Master: op=Shutter serial=50271 11:46:47 Shutter LASER open 11:46:47 Received message from Camera: op=State serial=50273 11:46:47 GetSingleValue result=40 Value=cccccccc 11:46:47 SkyScan query 11:46:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:46:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:48 Parameters OK 11:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:48 Set A/D data flow result=40 11:46:48 Set A/D channel type result=40 11:46:48 Set A/D encoding result=40 11:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:48 Set channel filter=0.000000e+000 result=40 11:46:48 Config A/D Result=40 11:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:48 Get A/D filter: -9.255963e+061 result=40 11:46:48 Get A/D value=-858993460 result=40 11:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:48 Parameters OK 11:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:48 Set A/D data flow result=40 11:46:48 Set A/D channel type result=40 11:46:48 Set A/D encoding result=40 11:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:48 Set channel filter=0.000000e+000 result=40 11:46:48 Config A/D Result=40 11:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:48 Get A/D filter: -9.255963e+061 result=40 11:46:48 Get A/D value=-858993460 result=40 11:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:48 Aux= 11:46:48 Message to Camera, serial 50273 queued 11:46:56 Received message from Master: op=Shutter serial=50283 11:46:56 Shutter LASER close 11:46:57 Received message from Master: op=PointingHead serial=50287 11:46:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:46:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:46:57 Point started: ret=0 11:46:57 point_skyscan result=0 11:46:58 Check angles 11:46:58 SkyScan query 11:46:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 11:46:59 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 11:46:59 Check angles 11:46:59 SkyScan query 11:46:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 11:46:59 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 11:47:00 Check angles 11:47:00 SkyScan query 11:47:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 11:47:00 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 11:47:00 Check angles 11:47:00 SkyScan query 11:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.34<-17356 Statuses=0008 0009 11:47:01 Msec=2250 True Az=112.995 Ze=-80.34 Az status=0008 Ze status=0009 11:47:01 Check angles 11:47:01 SkyScan query 11:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.4<-15960 Statuses=0008 0009 11:47:02 Msec=3000 True Az=112.995 Ze=-59.4 Az status=0008 Ze status=0009 11:47:02 Check angles 11:47:02 SkyScan query 11:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 11:47:02 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 11:47:03 Check angles 11:47:03 SkyScan query 11:47:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.055<-13137 Statuses=0008 0009 11:47:03 Msec=4500 True Az=112.995 Ze=-17.055 Az status=0008 Ze status=0009 11:47:03 Check angles 11:47:03 SkyScan query 11:47:04 SkyScan query done: ret=0 az=112.995<-7533 ze=3.915<-11739 Statuses=0008 0009 11:47:04 Msec=5250 True Az=112.995 Ze=3.915 Az status=0008 Ze status=0009 11:47:04 Check angles 11:47:04 SkyScan query 11:47:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:47:05 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:47:05 Message to Master queued w/err=0: serial=50287 error=0 11:47:10 Received message from Master: op=Filter serial=50288 11:47:10 Color wheel filter change from 0 to 0 11:47:10 FLIGetFilterPos err=0 currentPosition=0 11:47:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:47:10 Filter is already there-color wheel unchanged 11:47:10 Received message from Master: op=Shutter serial=50289 11:47:10 Shutter LASER close 11:47:10 Received message from Camera: op=State serial=50291 11:47:10 GetSingleValue result=40 Value=cccccccc 11:47:10 SkyScan query 11:47:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:47:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:11 Parameters OK 11:47:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:11 Set A/D data flow result=40 11:47:11 Set A/D channel type result=40 11:47:11 Set A/D encoding result=40 11:47:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:11 Set channel filter=0.000000e+000 result=40 11:47:11 Config A/D Result=40 11:47:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:11 Get A/D filter: -9.255963e+061 result=40 11:47:11 Get A/D value=-858993460 result=40 11:47:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:11 Parameters OK 11:47:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:11 Set A/D data flow result=40 11:47:11 Set A/D channel type result=40 11:47:11 Set A/D encoding result=40 11:47:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:11 Set channel filter=0.000000e+000 result=40 11:47:11 Config A/D Result=40 11:47:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:11 Get A/D filter: -9.255963e+061 result=40 11:47:11 Get A/D value=-858993460 result=40 11:47:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:47:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:47:11 Aux= 11:47:11 Message to Camera, serial 50291 queued 11:47:47 Received message from Master: op=PointingHead serial=50304 11:47:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:47:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:47:48 Point started: ret=0 11:47:48 point_skyscan result=0 11:47:48 Check angles 11:47:48 SkyScan query 11:47:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:47:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:47:49 Message to Master queued w/err=0: serial=50304 error=0 11:47:54 Received message from Master: op=Filter serial=50305 11:47:54 Color wheel filter change from 0 to 0 11:47:54 FLIGetFilterPos err=0 currentPosition=0 11:47:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:47:54 Filter is already there-color wheel unchanged 11:47:54 Received message from Master: op=Shutter serial=50306 11:47:54 Shutter LASER close 11:47:54 Received message from Camera: op=State serial=50308 11:47:54 GetSingleValue result=40 Value=cccccccc 11:47:54 SkyScan query 11:47:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:47:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:55 Parameters OK 11:47:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:55 Set A/D data flow result=40 11:47:55 Set A/D channel type result=40 11:47:55 Set A/D encoding result=40 11:47:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:55 Set channel filter=0.000000e+000 result=40 11:47:55 Config A/D Result=40 11:47:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:55 Get A/D filter: -9.255963e+061 result=40 11:47:55 Get A/D value=-858993460 result=40 11:47:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:55 Parameters OK 11:47:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:55 Set A/D data flow result=40 11:47:55 Set A/D channel type result=40 11:47:55 Set A/D encoding result=40 11:47:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:55 Set channel filter=0.000000e+000 result=40 11:47:55 Config A/D Result=40 11:47:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:55 Get A/D filter: -9.255963e+061 result=40 11:47:55 Get A/D value=-858993460 result=40 11:47:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:47:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:47:55 Aux= 11:47:55 Message to Camera, serial 50308 queued 11:48:32 Received message from Master: op=PointingHead serial=50321 11:48:32 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:48:32 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:48:32 Point started: ret=0 11:48:32 point_skyscan result=0 11:48:33 Check angles 11:48:33 SkyScan query 11:48:33 SkyScan query done: ret=0 az=135.69<-9046 ze=-6.495<-12433 Statuses=0009 0008 11:48:33 Msec=0 True Az=135.69 Ze=-6.495 Az status=0009 Ze status=0008 11:48:34 Check angles 11:48:34 SkyScan query 11:48:34 SkyScan query done: ret=0 az=153.54<-10236 ze=-6.48<-12432 Statuses=0009 0008 11:48:34 Msec=750 True Az=153.54 Ze=-6.48 Az status=0009 Ze status=0008 11:48:34 Check angles 11:48:34 SkyScan query 11:48:35 SkyScan query done: ret=0 az=171.39<-11426 ze=-6.48<-12432 Statuses=0009 0008 11:48:35 Msec=1500 True Az=171.39 Ze=-6.48 Az status=0009 Ze status=0008 11:48:35 Check angles 11:48:35 SkyScan query 11:48:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 11:48:36 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 11:48:36 Message to Master queued w/err=0: serial=50321 error=0 11:48:41 Received message from Master: op=Filter serial=50322 11:48:41 Color wheel filter change from 0 to 0 11:48:41 FLIGetFilterPos err=0 currentPosition=0 11:48:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:41 Filter is already there-color wheel unchanged 11:48:41 Received message from Master: op=Shutter serial=50323 11:48:41 Shutter LASER close 11:48:41 Received message from Camera: op=State serial=50325 11:48:41 GetSingleValue result=40 Value=cccccccc 11:48:41 SkyScan query 11:48:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 11:48:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:41 Parameters OK 11:48:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:41 Set A/D data flow result=40 11:48:41 Set A/D channel type result=40 11:48:41 Set A/D encoding result=40 11:48:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:41 Set channel filter=0.000000e+000 result=40 11:48:41 Config A/D Result=40 11:48:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:41 Get A/D filter: -9.255963e+061 result=40 11:48:41 Get A/D value=-858993460 result=40 11:48:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:41 Parameters OK 11:48:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:41 Set A/D data flow result=40 11:48:41 Set A/D channel type result=40 11:48:41 Set A/D encoding result=40 11:48:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:41 Set channel filter=0.000000e+000 result=40 11:48:41 Config A/D Result=40 11:48:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:41 Get A/D filter: -9.255963e+061 result=40 11:48:41 Get A/D value=-858993460 result=40 11:48:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:41 Aux= 11:48:41 Message to Camera, serial 50325 queued 11:49:18 Received message from Master: op=PointingHead serial=50338 11:49:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:49:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:49:19 Point started: ret=0 11:49:19 point_skyscan result=0 11:49:19 Check angles 11:49:19 SkyScan query 11:49:20 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 11:49:20 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 11:49:20 Check angles 11:49:20 SkyScan query 11:49:21 SkyScan query done: ret=0 az=135.06<-9004 ze=6.495<-11567 Statuses=0009 0008 11:49:21 Msec=750 True Az=135.06 Ze=6.495 Az status=0009 Ze status=0008 11:49:21 Check angles 11:49:21 SkyScan query 11:49:21 SkyScan query done: ret=0 az=117.585<-7839 ze=6.495<-11567 Statuses=0009 0008 11:49:21 Msec=1500 True Az=117.585 Ze=6.495 Az status=0009 Ze status=0008 11:49:22 Check angles 11:49:22 SkyScan query 11:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:49:22 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:49:22 Message to Master queued w/err=0: serial=50338 error=0 11:49:27 Received message from Master: op=Filter serial=50339 11:49:27 Color wheel filter change from 0 to 0 11:49:27 FLIGetFilterPos err=0 currentPosition=0 11:49:27 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:27 Filter is already there-color wheel unchanged 11:49:27 Received message from Master: op=Shutter serial=50340 11:49:27 Shutter LASER close 11:49:27 Received message from Camera: op=State serial=50342 11:49:27 GetSingleValue result=40 Value=cccccccc 11:49:27 SkyScan query 11:49:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:49:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:28 Parameters OK 11:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:28 Set A/D data flow result=40 11:49:28 Set A/D channel type result=40 11:49:28 Set A/D encoding result=40 11:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:28 Set channel filter=0.000000e+000 result=40 11:49:28 Config A/D Result=40 11:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:28 Get A/D filter: -9.255963e+061 result=40 11:49:28 Get A/D value=-858993460 result=40 11:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:28 Parameters OK 11:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:28 Set A/D data flow result=40 11:49:28 Set A/D channel type result=40 11:49:28 Set A/D encoding result=40 11:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:28 Set channel filter=0.000000e+000 result=40 11:49:28 Config A/D Result=40 11:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:28 Get A/D filter: -9.255963e+061 result=40 11:49:28 Get A/D value=-858993460 result=40 11:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:28 Aux= 11:49:28 Message to Camera, serial 50342 queued 11:50:05 Received message from Master: op=PointingHead serial=50355 11:50:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:50:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:50:05 Point started: ret=0 11:50:05 point_skyscan result=0 11:50:06 Check angles 11:50:06 SkyScan query 11:50:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 11:50:06 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 11:50:07 Check angles 11:50:07 SkyScan query 11:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 11:50:07 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 11:50:07 Check angles 11:50:07 SkyScan query 11:50:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 11:50:08 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 11:50:08 Check angles 11:50:08 SkyScan query 11:50:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 11:50:09 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 11:50:09 Check angles 11:50:09 SkyScan query 11:50:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 11:50:09 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 11:50:10 Check angles 11:50:10 SkyScan query 11:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 11:50:10 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 11:50:10 Check angles 11:50:10 SkyScan query 11:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.43<-21962 Statuses=0008 0009 11:50:11 Msec=4500 True Az=112.995 Ze=-149.43 Az status=0008 Ze status=0009 11:50:11 Check angles 11:50:11 SkyScan query 11:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.37<-23358 Statuses=0008 0009 11:50:12 Msec=5250 True Az=112.995 Ze=-170.37 Az status=0008 Ze status=0009 11:50:12 Check angles 11:50:12 SkyScan query 11:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:50:12 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:50:12 Message to Master queued w/err=0: serial=50355 error=0 11:50:17 Received message from Master: op=Filter serial=50356 11:50:17 Color wheel filter change from 0 to 0 11:50:17 FLIGetFilterPos err=0 currentPosition=0 11:50:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:17 Filter is already there-color wheel unchanged 11:50:18 Received message from Master: op=Shutter serial=50357 11:50:18 Shutter LASER open 11:50:18 Received message from Camera: op=State serial=50359 11:50:18 GetSingleValue result=40 Value=cccccccc 11:50:18 SkyScan query 11:50:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:50:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:18 Parameters OK 11:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:18 Set A/D data flow result=40 11:50:18 Set A/D channel type result=40 11:50:18 Set A/D encoding result=40 11:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:18 Set channel filter=0.000000e+000 result=40 11:50:18 Config A/D Result=40 11:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:18 Get A/D filter: -9.255963e+061 result=40 11:50:18 Get A/D value=-858993460 result=40 11:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:18 Parameters OK 11:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:18 Set A/D data flow result=40 11:50:18 Set A/D channel type result=40 11:50:18 Set A/D encoding result=40 11:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:18 Set channel filter=0.000000e+000 result=40 11:50:18 Config A/D Result=40 11:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:18 Get A/D filter: -9.255963e+061 result=40 11:50:18 Get A/D value=-858993460 result=40 11:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:18 Aux= 11:50:18 Message to Camera, serial 50359 queued 11:50:27 Received message from Master: op=Shutter serial=50369 11:50:27 Shutter LASER close 11:50:27 Received message from Master: op=PointingHead serial=50373 11:50:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:50:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:50:28 Point started: ret=0 11:50:28 point_skyscan result=0 11:50:28 Check angles 11:50:28 SkyScan query 11:50:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 11:50:29 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 11:50:29 Check angles 11:50:29 SkyScan query 11:50:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 11:50:30 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 11:50:30 Check angles 11:50:30 SkyScan query 11:50:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.425<-18695 Statuses=0008 0009 11:50:30 Msec=1500 True Az=112.995 Ze=-100.425 Az status=0008 Ze status=0009 11:50:31 Check angles 11:50:31 SkyScan query 11:50:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 11:50:31 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 11:50:31 Check angles 11:50:31 SkyScan query 11:50:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 11:50:32 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 11:50:32 Check angles 11:50:32 SkyScan query 11:50:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 11:50:33 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 11:50:33 Check angles 11:50:33 SkyScan query 11:50:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.65<-13110 Statuses=0008 0009 11:50:33 Msec=4500 True Az=112.995 Ze=-16.65 Az status=0008 Ze status=0009 11:50:34 Check angles 11:50:34 SkyScan query 11:50:34 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 11:50:34 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 11:50:34 Check angles 11:50:34 SkyScan query 11:50:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:50:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:50:35 Message to Master queued w/err=0: serial=50373 error=0 11:50:40 Received message from Master: op=Filter serial=50374 11:50:40 Color wheel filter change from 0 to 0 11:50:40 FLIGetFilterPos err=0 currentPosition=0 11:50:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:40 Filter is already there-color wheel unchanged 11:50:40 Received message from Master: op=Shutter serial=50375 11:50:40 Shutter LASER close 11:50:40 Received message from Camera: op=State serial=50377 11:50:40 GetSingleValue result=40 Value=cccccccc 11:50:40 SkyScan query 11:50:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:50:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:41 Parameters OK 11:50:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:41 Set A/D data flow result=40 11:50:41 Set A/D channel type result=40 11:50:41 Set A/D encoding result=40 11:50:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:41 Set channel filter=0.000000e+000 result=40 11:50:41 Config A/D Result=40 11:50:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:41 Get A/D filter: -9.255963e+061 result=40 11:50:41 Get A/D value=-858993460 result=40 11:50:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:41 Parameters OK 11:50:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:41 Set A/D data flow result=40 11:50:41 Set A/D channel type result=40 11:50:41 Set A/D encoding result=40 11:50:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:41 Set channel filter=0.000000e+000 result=40 11:50:41 Config A/D Result=40 11:50:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:41 Get A/D filter: -9.255963e+061 result=40 11:50:41 Get A/D value=-858993460 result=40 11:50:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:41 Aux= 11:50:41 Message to Camera, serial 50377 queued 11:51:18 Received message from Master: op=PointingHead serial=50390 11:51:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:51:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:51:18 Point started: ret=0 11:51:18 point_skyscan result=0 11:51:19 Check angles 11:51:19 SkyScan query 11:51:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:51:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:51:19 Message to Master queued w/err=0: serial=50390 error=0 11:51:24 Received message from Master: op=Filter serial=50391 11:51:24 Color wheel filter change from 0 to 0 11:51:24 FLIGetFilterPos err=0 currentPosition=0 11:51:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:24 Filter is already there-color wheel unchanged 11:51:25 Received message from Master: op=Shutter serial=50392 11:51:25 Shutter LASER close 11:51:25 Received message from Camera: op=State serial=50394 11:51:25 GetSingleValue result=40 Value=cccccccc 11:51:25 SkyScan query 11:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:51:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:25 Parameters OK 11:51:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:25 Set A/D data flow result=40 11:51:25 Set A/D channel type result=40 11:51:25 Set A/D encoding result=40 11:51:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:25 Set channel filter=0.000000e+000 result=40 11:51:25 Config A/D Result=40 11:51:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:25 Get A/D filter: -9.255963e+061 result=40 11:51:25 Get A/D value=-858993460 result=40 11:51:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:25 Parameters OK 11:51:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:25 Set A/D data flow result=40 11:51:25 Set A/D channel type result=40 11:51:25 Set A/D encoding result=40 11:51:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:25 Set channel filter=0.000000e+000 result=40 11:51:25 Config A/D Result=40 11:51:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:25 Get A/D filter: -9.255963e+061 result=40 11:51:25 Get A/D value=-858993460 result=40 11:51:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:25 Aux= 11:51:25 Message to Camera, serial 50394 queued 11:52:02 Received message from Master: op=PointingHead serial=50407 11:52:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:52:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:52:02 Point started: ret=0 11:52:02 point_skyscan result=0 11:52:03 Check angles 11:52:03 SkyScan query 11:52:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:52:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:52:04 Message to Master queued w/err=0: serial=50407 error=0 11:52:09 Received message from Master: op=Filter serial=50408 11:52:09 Color wheel filter change from 0 to 0 11:52:09 FLIGetFilterPos err=0 currentPosition=0 11:52:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:09 Filter is already there-color wheel unchanged 11:52:09 Received message from Master: op=Shutter serial=50409 11:52:09 Shutter LASER close 11:52:09 Received message from Camera: op=State serial=50411 11:52:09 GetSingleValue result=40 Value=cccccccc 11:52:09 SkyScan query 11:52:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:52:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:09 Parameters OK 11:52:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:09 Set A/D data flow result=40 11:52:09 Set A/D channel type result=40 11:52:09 Set A/D encoding result=40 11:52:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:09 Set channel filter=0.000000e+000 result=40 11:52:09 Config A/D Result=40 11:52:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:09 Get A/D filter: -9.255963e+061 result=40 11:52:09 Get A/D value=-858993460 result=40 11:52:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:09 Parameters OK 11:52:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:09 Set A/D data flow result=40 11:52:09 Set A/D channel type result=40 11:52:09 Set A/D encoding result=40 11:52:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:09 Set channel filter=0.000000e+000 result=40 11:52:09 Config A/D Result=40 11:52:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:09 Get A/D filter: -9.255963e+061 result=40 11:52:09 Get A/D value=-858993460 result=40 11:52:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:09 Aux= 11:52:09 Message to Camera, serial 50411 queued 11:52:46 Received message from Master: op=PointingHead serial=50424 11:52:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:52:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:52:47 Point started: ret=0 11:52:47 point_skyscan result=0 11:52:47 Check angles 11:52:47 SkyScan query 11:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:52:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:52:48 Message to Master queued w/err=0: serial=50424 error=0 11:52:53 Received message from Master: op=Filter serial=50425 11:52:53 Color wheel filter change from 0 to 0 11:52:53 FLIGetFilterPos err=0 currentPosition=0 11:52:53 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:53 Filter is already there-color wheel unchanged 11:52:53 Received message from Master: op=Shutter serial=50426 11:52:53 Shutter LASER close 11:52:53 Received message from Camera: op=State serial=50428 11:52:53 GetSingleValue result=40 Value=cccccccc 11:52:53 SkyScan query 11:52:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:52:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:54 Parameters OK 11:52:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:54 Set A/D data flow result=40 11:52:54 Set A/D channel type result=40 11:52:54 Set A/D encoding result=40 11:52:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:54 Set channel filter=0.000000e+000 result=40 11:52:54 Config A/D Result=40 11:52:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:54 Get A/D filter: -9.255963e+061 result=40 11:52:54 Get A/D value=-858993460 result=40 11:52:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:54 Parameters OK 11:52:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:54 Set A/D data flow result=40 11:52:54 Set A/D channel type result=40 11:52:54 Set A/D encoding result=40 11:52:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:54 Set channel filter=0.000000e+000 result=40 11:52:54 Config A/D Result=40 11:52:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:54 Get A/D filter: -9.255963e+061 result=40 11:52:54 Get A/D value=-858993460 result=40 11:52:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:54 Aux= 11:52:54 Message to Camera, serial 50428 queued 11:53:31 Received message from Master: op=PointingHead serial=50441 11:53:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:53:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:53:31 Point started: ret=0 11:53:31 point_skyscan result=0 11:53:32 Check angles 11:53:32 SkyScan query 11:53:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 11:53:32 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 11:53:32 Check angles 11:53:32 SkyScan query 11:53:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.055<-14937 Statuses=0008 0009 11:53:33 Msec=750 True Az=112.995 Ze=-44.055 Az status=0008 Ze status=0009 11:53:33 Check angles 11:53:33 SkyScan query 11:53:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.025<-16335 Statuses=0008 0009 11:53:34 Msec=1500 True Az=112.995 Ze=-65.025 Az status=0008 Ze status=0009 11:53:34 Check angles 11:53:34 SkyScan query 11:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.98<-17732 Statuses=0008 0009 11:53:35 Msec=2250 True Az=112.995 Ze=-85.98 Az status=0008 Ze status=0009 11:53:35 Check angles 11:53:35 SkyScan query 11:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.92<-19128 Statuses=0008 0009 11:53:35 Msec=3000 True Az=112.995 Ze=-106.92 Az status=0008 Ze status=0009 11:53:35 Check angles 11:53:35 SkyScan query 11:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.89<-20526 Statuses=0008 0009 11:53:36 Msec=3750 True Az=112.995 Ze=-127.89 Az status=0008 Ze status=0009 11:53:36 Check angles 11:53:36 SkyScan query 11:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.83<-21922 Statuses=0008 0009 11:53:37 Msec=4500 True Az=112.995 Ze=-148.83 Az status=0008 Ze status=0009 11:53:37 Check angles 11:53:37 SkyScan query 11:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.785<-23319 Statuses=0008 0009 11:53:38 Msec=5250 True Az=112.995 Ze=-169.785 Az status=0008 Ze status=0009 11:53:38 Check angles 11:53:38 SkyScan query 11:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:53:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:53:38 Message to Master queued w/err=0: serial=50441 error=0 11:53:43 Received message from Master: op=Filter serial=50442 11:53:43 Color wheel filter change from 0 to 0 11:53:43 FLIGetFilterPos err=0 currentPosition=0 11:53:43 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:43 Filter is already there-color wheel unchanged 11:53:43 Received message from Master: op=Shutter serial=50443 11:53:43 Shutter LASER open 11:53:44 Received message from Camera: op=State serial=50445 11:53:44 GetSingleValue result=40 Value=cccccccc 11:53:44 SkyScan query 11:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:53:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:44 Parameters OK 11:53:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:44 Set A/D data flow result=40 11:53:44 Set A/D channel type result=40 11:53:44 Set A/D encoding result=40 11:53:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:44 Set channel filter=0.000000e+000 result=40 11:53:44 Config A/D Result=40 11:53:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:44 Get A/D filter: -9.255963e+061 result=40 11:53:44 Get A/D value=-858993460 result=40 11:53:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:44 Parameters OK 11:53:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:44 Set A/D data flow result=40 11:53:44 Set A/D channel type result=40 11:53:44 Set A/D encoding result=40 11:53:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:44 Set channel filter=0.000000e+000 result=40 11:53:44 Config A/D Result=40 11:53:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:44 Get A/D filter: -9.255963e+061 result=40 11:53:44 Get A/D value=-858993460 result=40 11:53:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:44 Aux= 11:53:44 Message to Camera, serial 50445 queued 11:53:53 Received message from Master: op=Shutter serial=50455 11:53:53 Shutter LASER close 11:53:53 Received message from Master: op=PointingHead serial=50459 11:53:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:53:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:53:54 Point started: ret=0 11:53:54 point_skyscan result=0 11:53:54 Check angles 11:53:54 SkyScan query 11:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.1<-21540 Statuses=0008 0009 11:53:55 Msec=0 True Az=112.995 Ze=-143.1 Az status=0008 Ze status=0009 11:53:55 Check angles 11:53:55 SkyScan query 11:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 11:53:56 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 11:53:56 Check angles 11:53:56 SkyScan query 11:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 11:53:56 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 11:53:57 Check angles 11:53:57 SkyScan query 11:53:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.83<-17322 Statuses=0008 0009 11:53:57 Msec=2250 True Az=112.995 Ze=-79.83 Az status=0008 Ze status=0009 11:53:57 Check angles 11:53:57 SkyScan query 11:53:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.875<-15925 Statuses=0008 0009 11:53:58 Msec=3000 True Az=112.995 Ze=-58.875 Az status=0008 Ze status=0009 11:53:58 Check angles 11:53:58 SkyScan query 11:53:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.89<-14526 Statuses=0008 0009 11:53:59 Msec=3750 True Az=112.995 Ze=-37.89 Az status=0008 Ze status=0009 11:53:59 Check angles 11:53:59 SkyScan query 11:53:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.935<-13129 Statuses=0008 0009 11:53:59 Msec=4500 True Az=112.995 Ze=-16.935 Az status=0008 Ze status=0009 11:54:00 Check angles 11:54:00 SkyScan query 11:54:00 SkyScan query done: ret=0 az=112.995<-7533 ze=4.005<-11733 Statuses=0008 0009 11:54:00 Msec=5250 True Az=112.995 Ze=4.005 Az status=0008 Ze status=0009 11:54:00 Check angles 11:54:00 SkyScan query 11:54:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:54:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:54:01 Message to Master queued w/err=0: serial=50459 error=0 11:54:06 Received message from Master: op=Filter serial=50460 11:54:06 Color wheel filter change from 0 to 0 11:54:06 FLIGetFilterPos err=0 currentPosition=0 11:54:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:06 Filter is already there-color wheel unchanged 11:54:06 Received message from Master: op=Shutter serial=50461 11:54:06 Shutter LASER close 11:54:06 Received message from Camera: op=State serial=50463 11:54:06 GetSingleValue result=40 Value=cccccccc 11:54:06 SkyScan query 11:54:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:54:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:07 Parameters OK 11:54:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:07 Set A/D data flow result=40 11:54:07 Set A/D channel type result=40 11:54:07 Set A/D encoding result=40 11:54:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:07 Set channel filter=0.000000e+000 result=40 11:54:07 Config A/D Result=40 11:54:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:07 Get A/D filter: -9.255963e+061 result=40 11:54:07 Get A/D value=-858993460 result=40 11:54:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:07 Parameters OK 11:54:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:07 Set A/D data flow result=40 11:54:07 Set A/D channel type result=40 11:54:07 Set A/D encoding result=40 11:54:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:07 Set channel filter=0.000000e+000 result=40 11:54:07 Config A/D Result=40 11:54:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:07 Get A/D filter: -9.255963e+061 result=40 11:54:07 Get A/D value=-858993460 result=40 11:54:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:07 Aux= 11:54:07 Message to Camera, serial 50463 queued 11:54:44 Received message from Master: op=PointingHead serial=50476 11:54:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:54:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:54:44 Point started: ret=0 11:54:44 point_skyscan result=0 11:54:45 Check angles 11:54:45 SkyScan query 11:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:54:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:54:45 Message to Master queued w/err=0: serial=50476 error=0 11:54:50 Received message from Master: op=Filter serial=50477 11:54:50 Color wheel filter change from 0 to 0 [UTC 2019-3-1 11:54:50] 11:54:50 FLIGetFilterPos err=0 currentPosition=0 11:54:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:50 Filter is already there-color wheel unchanged 11:54:51 Received message from Master: op=Shutter serial=50478 11:54:51 Shutter LASER close 11:54:51 Received message from Camera: op=State serial=50480 11:54:51 GetSingleValue result=40 Value=cccccccc 11:54:51 SkyScan query 11:54:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:54:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:51 Parameters OK 11:54:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:51 Set A/D data flow result=40 11:54:51 Set A/D channel type result=40 11:54:51 Set A/D encoding result=40 11:54:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:51 Set channel filter=0.000000e+000 result=40 11:54:51 Config A/D Result=40 11:54:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:51 Get A/D filter: -9.255963e+061 result=40 11:54:51 Get A/D value=-858993460 result=40 11:54:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:51 Parameters OK 11:54:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:51 Set A/D data flow result=40 11:54:51 Set A/D channel type result=40 11:54:51 Set A/D encoding result=40 11:54:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:51 Set channel filter=0.000000e+000 result=40 11:54:51 Config A/D Result=40 11:54:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:51 Get A/D filter: -9.255963e+061 result=40 11:54:51 Get A/D value=-858993460 result=40 11:54:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:51 Aux= 11:54:51 Message to Camera, serial 50480 queued 11:55:28 Received message from Master: op=PointingHead serial=50493 11:55:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:55:28 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:55:29 Point started: ret=0 11:55:29 point_skyscan result=0 11:55:29 Check angles 11:55:29 SkyScan query 11:55:30 SkyScan query done: ret=0 az=136.185<-9079 ze=-6.51<-12434 Statuses=0009 0008 11:55:30 Msec=0 True Az=136.185 Ze=-6.51 Az status=0009 Ze status=0008 11:55:30 Check angles 11:55:30 SkyScan query 11:55:31 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.495<-12433 Statuses=0009 0008 11:55:31 Msec=750 True Az=153.795 Ze=-6.495 Az status=0009 Ze status=0008 11:55:31 Check angles 11:55:31 SkyScan query 11:55:31 SkyScan query done: ret=0 az=171.6<-11440 ze=-6.495<-12433 Statuses=0009 0008 11:55:31 Msec=1500 True Az=171.6 Ze=-6.495 Az status=0009 Ze status=0008 11:55:32 Check angles 11:55:32 SkyScan query 11:55:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:55:32 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:55:32 Message to Master queued w/err=0: serial=50493 error=0 11:55:37 Received message from Master: op=Filter serial=50494 11:55:37 Color wheel filter change from 0 to 0 11:55:37 FLIGetFilterPos err=0 currentPosition=0 11:55:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:37 Filter is already there-color wheel unchanged 11:55:37 Received message from Master: op=Shutter serial=50495 11:55:37 Shutter LASER close 11:55:37 Received message from Camera: op=State serial=50497 11:55:37 GetSingleValue result=40 Value=cccccccc 11:55:37 SkyScan query 11:55:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:55:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:38 Parameters OK 11:55:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:38 Set A/D data flow result=40 11:55:38 Set A/D channel type result=40 11:55:38 Set A/D encoding result=40 11:55:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:38 Set channel filter=0.000000e+000 result=40 11:55:38 Config A/D Result=40 11:55:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:38 Get A/D filter: -9.255963e+061 result=40 11:55:38 Get A/D value=-858993460 result=40 11:55:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:38 Parameters OK 11:55:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:38 Set A/D data flow result=40 11:55:38 Set A/D channel type result=40 11:55:38 Set A/D encoding result=40 11:55:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:38 Set channel filter=0.000000e+000 result=40 11:55:38 Config A/D Result=40 11:55:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:38 Get A/D filter: -9.255963e+061 result=40 11:55:38 Get A/D value=-858993460 result=40 11:55:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:38 Aux= 11:55:38 Message to Camera, serial 50497 queued 11:56:15 Received message from Master: op=PointingHead serial=50510 11:56:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:56:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:56:15 Point started: ret=0 11:56:15 point_skyscan result=0 11:56:16 Check angles 11:56:16 SkyScan query 11:56:16 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 11:56:16 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 11:56:17 Check angles 11:56:17 SkyScan query 11:56:17 SkyScan query done: ret=0 az=135.465<-9031 ze=6.495<-11567 Statuses=0009 0008 11:56:17 Msec=750 True Az=135.465 Ze=6.495 Az status=0009 Ze status=0008 11:56:17 Check angles 11:56:17 SkyScan query 11:56:18 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 11:56:18 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 11:56:18 Check angles 11:56:18 SkyScan query 11:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:56:19 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:56:19 Message to Master queued w/err=0: serial=50510 error=0 11:56:24 Received message from Master: op=Filter serial=50511 11:56:24 Color wheel filter change from 0 to 0 11:56:24 FLIGetFilterPos err=0 currentPosition=0 11:56:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:24 Filter is already there-color wheel unchanged 11:56:24 Received message from Master: op=Shutter serial=50512 11:56:24 Shutter LASER close 11:56:24 Received message from Camera: op=State serial=50514 11:56:24 GetSingleValue result=40 Value=cccccccc 11:56:24 SkyScan query 11:56:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:56:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:24 Parameters OK 11:56:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:24 Set A/D data flow result=40 11:56:24 Set A/D channel type result=40 11:56:24 Set A/D encoding result=40 11:56:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:24 Set channel filter=0.000000e+000 result=40 11:56:24 Config A/D Result=40 11:56:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:24 Get A/D filter: -9.255963e+061 result=40 11:56:24 Get A/D value=-858993460 result=40 11:56:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:24 Parameters OK 11:56:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:24 Set A/D data flow result=40 11:56:24 Set A/D channel type result=40 11:56:24 Set A/D encoding result=40 11:56:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:24 Set channel filter=0.000000e+000 result=40 11:56:24 Config A/D Result=40 11:56:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:24 Get A/D filter: -9.255963e+061 result=40 11:56:24 Get A/D value=-858993460 result=40 11:56:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:24 Aux= 11:56:24 Message to Camera, serial 50514 queued 11:57:01 Received message from Master: op=PointingHead serial=50527 11:57:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:57:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:57:02 Point started: ret=0 11:57:02 point_skyscan result=0 11:57:02 Check angles 11:57:02 SkyScan query 11:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 11:57:03 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 11:57:03 Check angles 11:57:03 SkyScan query 11:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 11:57:04 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 11:57:04 Check angles 11:57:04 SkyScan query 11:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-66<-16400 Statuses=0008 0009 11:57:04 Msec=1500 True Az=112.995 Ze=-66 Az status=0008 Ze status=0009 11:57:05 Check angles 11:57:05 SkyScan query 11:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.895<-17793 Statuses=0008 0009 11:57:05 Msec=2250 True Az=112.995 Ze=-86.895 Az status=0008 Ze status=0009 11:57:05 Check angles 11:57:05 SkyScan query 11:57:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.85<-19190 Statuses=0008 0009 11:57:06 Msec=3000 True Az=112.995 Ze=-107.85 Az status=0008 Ze status=0009 11:57:06 Check angles 11:57:06 SkyScan query 11:57:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.79<-20586 Statuses=0008 0009 11:57:07 Msec=3750 True Az=112.995 Ze=-128.79 Az status=0008 Ze status=0009 11:57:07 Check angles 11:57:07 SkyScan query 11:57:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.745<-21983 Statuses=0008 0009 11:57:07 Msec=4500 True Az=112.995 Ze=-149.745 Az status=0008 Ze status=0009 11:57:08 Check angles 11:57:08 SkyScan query 11:57:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.67<-23378 Statuses=0008 0009 11:57:08 Msec=5250 True Az=112.995 Ze=-170.67 Az status=0008 Ze status=0009 11:57:08 Check angles 11:57:08 SkyScan query 11:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:57:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:57:09 Message to Master queued w/err=0: serial=50527 error=0 11:57:14 Received message from Master: op=Filter serial=50528 11:57:14 Color wheel filter change from 0 to 0 11:57:14 FLIGetFilterPos err=0 currentPosition=0 11:57:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:14 Filter is already there-color wheel unchanged 11:57:14 Received message from Master: op=Shutter serial=50529 11:57:14 Shutter LASER open 11:57:14 Received message from Camera: op=State serial=50531 11:57:14 GetSingleValue result=40 Value=cccccccc 11:57:14 SkyScan query 11:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:57:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:15 Parameters OK 11:57:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:15 Set A/D data flow result=40 11:57:15 Set A/D channel type result=40 11:57:15 Set A/D encoding result=40 11:57:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:15 Set channel filter=0.000000e+000 result=40 11:57:15 Config A/D Result=40 11:57:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:15 Get A/D filter: -9.255963e+061 result=40 11:57:15 Get A/D value=-858993460 result=40 11:57:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:15 Parameters OK 11:57:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:15 Set A/D data flow result=40 11:57:15 Set A/D channel type result=40 11:57:15 Set A/D encoding result=40 11:57:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:15 Set channel filter=0.000000e+000 result=40 11:57:15 Config A/D Result=40 11:57:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:15 Get A/D filter: -9.255963e+061 result=40 11:57:15 Get A/D value=-858993460 result=40 11:57:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:15 Aux= 11:57:15 Message to Camera, serial 50531 queued 11:57:23 Received message from Master: op=Shutter serial=50541 11:57:23 Shutter LASER close 11:57:24 Received message from Master: op=PointingHead serial=50545 11:57:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:57:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:57:24 Point started: ret=0 11:57:24 point_skyscan result=0 11:57:25 Check angles 11:57:25 SkyScan query 11:57:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 11:57:25 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 11:57:26 Check angles 11:57:26 SkyScan query 11:57:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 11:57:26 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 11:57:26 Check angles 11:57:26 SkyScan query 11:57:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 11:57:27 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 11:57:27 Check angles 11:57:27 SkyScan query 11:57:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.31<-17354 Statuses=0008 0009 11:57:28 Msec=2250 True Az=112.995 Ze=-80.31 Az status=0008 Ze status=0009 11:57:28 Check angles 11:57:28 SkyScan query 11:57:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.355<-15957 Statuses=0008 0009 11:57:28 Msec=3000 True Az=112.995 Ze=-59.355 Az status=0008 Ze status=0009 11:57:29 Check angles 11:57:29 SkyScan query 11:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.385<-14559 Statuses=0008 0009 11:57:29 Msec=3750 True Az=112.995 Ze=-38.385 Az status=0008 Ze status=0009 11:57:29 Check angles 11:57:29 SkyScan query 11:57:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.46<-13164 Statuses=0008 0009 11:57:30 Msec=4500 True Az=112.995 Ze=-17.46 Az status=0008 Ze status=0009 11:57:30 Check angles 11:57:30 SkyScan query 11:57:31 SkyScan query done: ret=0 az=112.995<-7533 ze=3.51<-11766 Statuses=0008 0009 11:57:31 Msec=5250 True Az=112.995 Ze=3.51 Az status=0008 Ze status=0009 11:57:31 Check angles 11:57:31 SkyScan query 11:57:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:57:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:57:31 Message to Master queued w/err=0: serial=50545 error=0 11:57:36 Received message from Master: op=Filter serial=50546 11:57:36 Color wheel filter change from 0 to 0 11:57:36 FLIGetFilterPos err=0 currentPosition=0 11:57:36 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:36 Filter is already there-color wheel unchanged 11:57:37 Received message from Master: op=Shutter serial=50547 11:57:37 Shutter LASER close 11:57:37 Received message from Camera: op=State serial=50549 11:57:37 GetSingleValue result=40 Value=cccccccc 11:57:37 SkyScan query 11:57:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:37 Parameters OK 11:57:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:37 Set A/D data flow result=40 11:57:37 Set A/D channel type result=40 11:57:37 Set A/D encoding result=40 11:57:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:37 Set channel filter=0.000000e+000 result=40 11:57:37 Config A/D Result=40 11:57:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:37 Get A/D filter: -9.255963e+061 result=40 11:57:37 Get A/D value=-858993460 result=40 11:57:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:37 Parameters OK 11:57:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:37 Set A/D data flow result=40 11:57:37 Set A/D channel type result=40 11:57:37 Set A/D encoding result=40 11:57:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:37 Set channel filter=0.000000e+000 result=40 11:57:37 Config A/D Result=40 11:57:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:37 Get A/D filter: -9.255963e+061 result=40 11:57:37 Get A/D value=-858993460 result=40 11:57:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:37 Aux= 11:57:37 Message to Camera, serial 50549 queued 11:58:14 Received message from Master: op=PointingHead serial=50562 11:58:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:58:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:58:15 Point started: ret=0 11:58:15 point_skyscan result=0 11:58:15 Check angles 11:58:15 SkyScan query 11:58:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:58:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:58:16 Message to Master queued w/err=0: serial=50562 error=0 11:58:21 Received message from Master: op=Filter serial=50563 11:58:21 Color wheel filter change from 0 to 0 11:58:21 FLIGetFilterPos err=0 currentPosition=0 11:58:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:21 Filter is already there-color wheel unchanged 11:58:21 Received message from Master: op=Shutter serial=50564 11:58:21 Shutter LASER close 11:58:21 Received message from Camera: op=State serial=50566 11:58:21 GetSingleValue result=40 Value=cccccccc 11:58:21 SkyScan query 11:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:58:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:22 Parameters OK 11:58:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:22 Set A/D data flow result=40 11:58:22 Set A/D channel type result=40 11:58:22 Set A/D encoding result=40 11:58:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:22 Set channel filter=0.000000e+000 result=40 11:58:22 Config A/D Result=40 11:58:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:22 Get A/D filter: -9.255963e+061 result=40 11:58:22 Get A/D value=-858993460 result=40 11:58:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:22 Parameters OK 11:58:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:22 Set A/D data flow result=40 11:58:22 Set A/D channel type result=40 11:58:22 Set A/D encoding result=40 11:58:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:22 Set channel filter=0.000000e+000 result=40 11:58:22 Config A/D Result=40 11:58:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:22 Get A/D filter: -9.255963e+061 result=40 11:58:22 Get A/D value=-858993460 result=40 11:58:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:22 Aux= 11:58:22 Message to Camera, serial 50566 queued 11:58:58 Received message from Master: op=PointingHead serial=50579 11:58:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:58:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:58:59 Point started: ret=0 11:58:59 point_skyscan result=0 11:59:00 Check angles 11:59:00 SkyScan query 11:59:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:59:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:59:00 Message to Master queued w/err=0: serial=50579 error=0 11:59:05 Received message from Master: op=Filter serial=50580 11:59:05 Color wheel filter change from 0 to 0 11:59:05 FLIGetFilterPos err=0 currentPosition=0 11:59:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:05 Filter is already there-color wheel unchanged 11:59:05 Received message from Master: op=Shutter serial=50581 11:59:05 Shutter LASER close 11:59:05 Received message from Camera: op=State serial=50583 11:59:05 GetSingleValue result=40 Value=cccccccc 11:59:05 SkyScan query 11:59:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:59:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:06 Parameters OK 11:59:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:06 Set A/D data flow result=40 11:59:06 Set A/D channel type result=40 11:59:06 Set A/D encoding result=40 11:59:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:06 Set channel filter=0.000000e+000 result=40 11:59:06 Config A/D Result=40 11:59:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:06 Get A/D filter: -9.255963e+061 result=40 11:59:06 Get A/D value=-858993460 result=40 11:59:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:06 Parameters OK 11:59:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:06 Set A/D data flow result=40 11:59:06 Set A/D channel type result=40 11:59:06 Set A/D encoding result=40 11:59:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:06 Set channel filter=0.000000e+000 result=40 11:59:06 Config A/D Result=40 11:59:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:06 Get A/D filter: -9.255963e+061 result=40 11:59:06 Get A/D value=-858993460 result=40 11:59:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:06 Aux= 11:59:06 Message to Camera, serial 50583 queued 11:59:43 Received message from Master: op=PointingHead serial=50596 11:59:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:59:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:59:43 Point started: ret=0 11:59:43 point_skyscan result=0 11:59:44 Check angles 11:59:44 SkyScan query 11:59:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:59:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:59:44 Message to Master queued w/err=0: serial=50596 error=0 11:59:50 Received message from Master: op=Filter serial=50597 11:59:50 Color wheel filter change from 0 to 0 11:59:50 FLIGetFilterPos err=0 currentPosition=0 11:59:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:50 Filter is already there-color wheel unchanged 11:59:50 Received message from Master: op=Shutter serial=50598 11:59:50 Shutter LASER close 11:59:50 Received message from Camera: op=State serial=50600 11:59:50 GetSingleValue result=40 Value=cccccccc 11:59:50 SkyScan query 11:59:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:59:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:50 Parameters OK 11:59:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:50 Set A/D data flow result=40 11:59:50 Set A/D channel type result=40 11:59:50 Set A/D encoding result=40 11:59:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:50 Set channel filter=0.000000e+000 result=40 11:59:50 Config A/D Result=40 11:59:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:50 Get A/D filter: -9.255963e+061 result=40 11:59:50 Get A/D value=-858993460 result=40 11:59:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:50 Parameters OK 11:59:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:50 Set A/D data flow result=40 11:59:50 Set A/D channel type result=40 11:59:50 Set A/D encoding result=40 11:59:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:50 Set channel filter=0.000000e+000 result=40 11:59:50 Config A/D Result=40 11:59:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:50 Get A/D filter: -9.255963e+061 result=40 11:59:50 Get A/D value=-858993460 result=40 11:59:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:50 Aux= 11:59:50 Message to Camera, serial 50600 queued 12:00:27 Received message from Master: op=PointingHead serial=50613 12:00:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:00:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:00:28 Point started: ret=0 12:00:28 point_skyscan result=0 12:00:28 Check angles 12:00:28 SkyScan query 12:00:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 12:00:29 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 12:00:29 Check angles 12:00:29 SkyScan query 12:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 12:00:30 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 12:00:30 Check angles 12:00:30 SkyScan query 12:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.52<-16368 Statuses=0008 0009 12:00:30 Msec=1500 True Az=112.995 Ze=-65.52 Az status=0008 Ze status=0009 12:00:31 Check angles 12:00:31 SkyScan query 12:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 12:00:31 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 12:00:31 Check angles 12:00:31 SkyScan query 12:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 12:00:32 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 12:00:32 Check angles 12:00:32 SkyScan query 12:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.79<-20586 Statuses=0008 0009 12:00:33 Msec=3750 True Az=112.995 Ze=-128.79 Az status=0008 Ze status=0009 12:00:33 Check angles 12:00:33 SkyScan query 12:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.775<-21985 Statuses=0008 0009 12:00:33 Msec=4500 True Az=112.995 Ze=-149.775 Az status=0008 Ze status=0009 12:00:34 Check angles 12:00:34 SkyScan query 12:00:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.685<-23379 Statuses=0008 0009 12:00:34 Msec=5250 True Az=112.995 Ze=-170.685 Az status=0008 Ze status=0009 12:00:34 Check angles 12:00:34 SkyScan query 12:00:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:00:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:00:35 Message to Master queued w/err=0: serial=50613 error=0 12:00:40 Received message from Master: op=Filter serial=50614 12:00:40 Color wheel filter change from 0 to 0 12:00:40 FLIGetFilterPos err=0 currentPosition=0 12:00:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:40 Filter is already there-color wheel unchanged 12:00:40 Received message from Master: op=Shutter serial=50615 12:00:40 Shutter LASER open 12:00:40 Received message from Camera: op=State serial=50617 12:00:40 GetSingleValue result=40 Value=cccccccc 12:00:40 SkyScan query 12:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:00:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:41 Parameters OK 12:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:41 Set A/D data flow result=40 12:00:41 Set A/D channel type result=40 12:00:41 Set A/D encoding result=40 12:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:41 Set channel filter=0.000000e+000 result=40 12:00:41 Config A/D Result=40 12:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:41 Get A/D filter: -9.255963e+061 result=40 12:00:41 Get A/D value=-858993460 result=40 12:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:41 Parameters OK 12:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:41 Set A/D data flow result=40 12:00:41 Set A/D channel type result=40 12:00:41 Set A/D encoding result=40 12:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:41 Set channel filter=0.000000e+000 result=40 12:00:41 Config A/D Result=40 12:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:41 Get A/D filter: -9.255963e+061 result=40 12:00:41 Get A/D value=-858993460 result=40 12:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:41 Aux= 12:00:41 Message to Camera, serial 50617 queued 12:00:49 Received message from Master: op=Shutter serial=50627 12:00:49 Shutter LASER close 12:00:50 Received message from Master: op=PointingHead serial=50631 12:00:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:00:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:00:50 Point started: ret=0 12:00:50 point_skyscan result=0 12:00:51 Check angles 12:00:51 SkyScan query 12:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 12:00:51 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 12:00:52 Check angles 12:00:52 SkyScan query 12:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.16<-20144 Statuses=0008 0009 12:00:52 Msec=750 True Az=112.995 Ze=-122.16 Az status=0008 Ze status=0009 12:00:52 Check angles 12:00:52 SkyScan query 12:00:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.77<-18718 Statuses=0008 0009 12:00:53 Msec=1500 True Az=112.995 Ze=-100.77 Az status=0008 Ze status=0009 12:00:53 Check angles 12:00:53 SkyScan query 12:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.83<-17322 Statuses=0008 0009 12:00:54 Msec=2250 True Az=112.995 Ze=-79.83 Az status=0008 Ze status=0009 12:00:54 Check angles 12:00:54 SkyScan query 12:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.86<-15924 Statuses=0008 0009 12:00:54 Msec=3000 True Az=112.995 Ze=-58.86 Az status=0008 Ze status=0009 12:00:55 Check angles 12:00:55 SkyScan query 12:00:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.89<-14526 Statuses=0008 0009 12:00:55 Msec=3750 True Az=112.995 Ze=-37.89 Az status=0008 Ze status=0009 12:00:55 Check angles 12:00:55 SkyScan query 12:00:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.935<-13129 Statuses=0008 0009 12:00:56 Msec=4500 True Az=112.995 Ze=-16.935 Az status=0008 Ze status=0009 12:00:56 Check angles 12:00:56 SkyScan query 12:00:57 SkyScan query done: ret=0 az=112.995<-7533 ze=4.005<-11733 Statuses=0008 0009 12:00:57 Msec=5250 True Az=112.995 Ze=4.005 Az status=0008 Ze status=0009 12:00:57 Check angles 12:00:57 SkyScan query 12:00:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:00:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:00:57 Message to Master queued w/err=0: serial=50631 error=0 12:01:02 Received message from Master: op=Filter serial=50632 12:01:02 Color wheel filter change from 0 to 0 12:01:02 FLIGetFilterPos err=0 currentPosition=0 12:01:02 FLIGetStepsRemaining err=0 RemainingSteps=0 12:01:02 Filter is already there-color wheel unchanged 12:01:03 Received message from Master: op=Shutter serial=50633 12:01:03 Shutter LASER close 12:01:03 Received message from Camera: op=State serial=50635 12:01:03 GetSingleValue result=40 Value=cccccccc 12:01:03 SkyScan query 12:01:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:01:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:03 Parameters OK 12:01:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:03 Set A/D data flow result=40 12:01:03 Set A/D channel type result=40 12:01:03 Set A/D encoding result=40 12:01:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:03 Set channel filter=0.000000e+000 result=40 12:01:03 Config A/D Result=40 12:01:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:03 Get A/D filter: -9.255963e+061 result=40 12:01:03 Get A/D value=-858993460 result=40 12:01:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:03 Parameters OK 12:01:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:03 Set A/D data flow result=40 12:01:03 Set A/D channel type result=40 12:01:03 Set A/D encoding result=40 12:01:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:03 Set channel filter=0.000000e+000 result=40 12:01:03 Config A/D Result=40 12:01:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:03 Get A/D filter: -9.255963e+061 result=40 12:01:03 Get A/D value=-858993460 result=40 12:01:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:01:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:01:03 Aux= 12:01:03 Message to Camera, serial 50635 queued 12:01:40 Received message from Master: op=PointingHead serial=50648 12:01:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:01:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:01:41 Point started: ret=0 12:01:41 point_skyscan result=0 12:01:41 Check angles 12:01:41 SkyScan query 12:01:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:01:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:01:42 Message to Master queued w/err=0: serial=50648 error=0 12:01:47 Received message from Master: op=Filter serial=50649 12:01:47 Color wheel filter change from 0 to 0 12:01:47 FLIGetFilterPos err=0 currentPosition=0 12:01:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:01:47 Filter is already there-color wheel unchanged 12:01:47 Received message from Master: op=Shutter serial=50650 12:01:47 Shutter LASER close 12:01:47 Received message from Camera: op=State serial=50652 12:01:47 GetSingleValue result=40 Value=cccccccc 12:01:47 SkyScan query 12:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:01:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:48 Parameters OK 12:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:48 Set A/D data flow result=40 12:01:48 Set A/D channel type result=40 12:01:48 Set A/D encoding result=40 12:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:48 Set channel filter=0.000000e+000 result=40 12:01:48 Config A/D Result=40 12:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:48 Get A/D filter: -9.255963e+061 result=40 12:01:48 Get A/D value=-858993460 result=40 12:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:48 Parameters OK 12:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:48 Set A/D data flow result=40 12:01:48 Set A/D channel type result=40 12:01:48 Set A/D encoding result=40 12:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:48 Set channel filter=0.000000e+000 result=40 12:01:48 Config A/D Result=40 12:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:48 Get A/D filter: -9.255963e+061 result=40 12:01:48 Get A/D value=-858993460 result=40 12:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:01:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:01:48 Aux= 12:01:48 Message to Camera, serial 50652 queued 12:02:25 Received message from Master: op=PointingHead serial=50665 12:02:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:02:25 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:02:25 Point started: ret=0 12:02:25 point_skyscan result=0 12:02:26 Check angles 12:02:26 SkyScan query 12:02:26 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 12:02:26 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 12:02:26 Check angles 12:02:26 SkyScan query 12:02:27 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 12:02:27 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 12:02:27 Check angles 12:02:27 SkyScan query 12:02:28 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 12:02:28 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 12:02:28 Check angles 12:02:28 SkyScan query 12:02:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:02:28 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:02:28 Message to Master queued w/err=0: serial=50665 error=0 12:02:33 Received message from Master: op=Filter serial=50666 12:02:33 Color wheel filter change from 0 to 0 12:02:33 FLIGetFilterPos err=0 currentPosition=0 12:02:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:33 Filter is already there-color wheel unchanged 12:02:34 Received message from Master: op=Shutter serial=50667 12:02:34 Shutter LASER close 12:02:34 Received message from Camera: op=State serial=50669 12:02:34 GetSingleValue result=40 Value=cccccccc 12:02:34 SkyScan query 12:02:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:02:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:34 Parameters OK 12:02:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:34 Set A/D data flow result=40 12:02:34 Set A/D channel type result=40 12:02:34 Set A/D encoding result=40 12:02:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:34 Set channel filter=0.000000e+000 result=40 12:02:34 Config A/D Result=40 12:02:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:34 Get A/D filter: -9.255963e+061 result=40 12:02:34 Get A/D value=-858993460 result=40 12:02:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:34 Parameters OK 12:02:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:34 Set A/D data flow result=40 12:02:34 Set A/D channel type result=40 12:02:34 Set A/D encoding result=40 12:02:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:34 Set channel filter=0.000000e+000 result=40 12:02:34 Config A/D Result=40 12:02:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:34 Get A/D filter: -9.255963e+061 result=40 12:02:34 Get A/D value=-858993460 result=40 12:02:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:34 Aux= 12:02:34 Message to Camera, serial 50669 queued 12:03:11 Received message from Master: op=PointingHead serial=50682 12:03:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:03:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:03:11 Point started: ret=0 12:03:11 point_skyscan result=0 12:03:12 Check angles 12:03:12 SkyScan query 12:03:13 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 12:03:13 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 12:03:13 Check angles 12:03:13 SkyScan query 12:03:13 SkyScan query done: ret=0 az=135.21<-9014 ze=6.495<-11567 Statuses=0009 0008 12:03:13 Msec=750 True Az=135.21 Ze=6.495 Az status=0009 Ze status=0008 12:03:14 Check angles 12:03:14 SkyScan query 12:03:14 SkyScan query done: ret=0 az=117.48<-7832 ze=6.495<-11567 Statuses=0009 0008 12:03:14 Msec=1500 True Az=117.48 Ze=6.495 Az status=0009 Ze status=0008 12:03:14 Check angles 12:03:14 SkyScan query 12:03:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:03:15 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:03:15 Message to Master queued w/err=0: serial=50682 error=0 12:03:20 Received message from Master: op=Filter serial=50683 12:03:20 Color wheel filter change from 0 to 0 12:03:20 FLIGetFilterPos err=0 currentPosition=0 12:03:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:20 Filter is already there-color wheel unchanged 12:03:20 Received message from Master: op=Shutter serial=50684 12:03:20 Shutter LASER close 12:03:20 Received message from Camera: op=State serial=50686 12:03:20 GetSingleValue result=40 Value=cccccccc 12:03:20 SkyScan query 12:03:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:03:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:21 Parameters OK 12:03:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:21 Set A/D data flow result=40 12:03:21 Set A/D channel type result=40 12:03:21 Set A/D encoding result=40 12:03:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:21 Set channel filter=0.000000e+000 result=40 12:03:21 Config A/D Result=40 12:03:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:21 Get A/D filter: -9.255963e+061 result=40 12:03:21 Get A/D value=-858993460 result=40 12:03:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:21 Parameters OK 12:03:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:21 Set A/D data flow result=40 12:03:21 Set A/D channel type result=40 12:03:21 Set A/D encoding result=40 12:03:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:21 Set channel filter=0.000000e+000 result=40 12:03:21 Config A/D Result=40 12:03:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:21 Get A/D filter: -9.255963e+061 result=40 12:03:21 Get A/D value=-858993460 result=40 12:03:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:21 Aux= 12:03:21 Message to Camera, serial 50686 queued 12:03:38 Received message from Master: op=Identify serial=50687 [UTC 2019-3-1 12:03:50] 12:03:58 Received message from Master: op=PointingHead serial=50702 12:03:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:03:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:03:58 Point started: ret=0 12:03:58 point_skyscan result=0 12:03:59 Check angles 12:03:59 SkyScan query 12:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.58<-13572 Statuses=0008 0009 12:03:59 Msec=0 True Az=112.995 Ze=-23.58 Az status=0008 Ze status=0009 12:03:59 Check angles 12:03:59 SkyScan query 12:04:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.985<-14999 Statuses=0008 0009 12:04:00 Msec=750 True Az=112.995 Ze=-44.985 Az status=0008 Ze status=0009 12:04:00 Check angles 12:04:00 SkyScan query 12:04:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.925<-16395 Statuses=0008 0009 12:04:01 Msec=1500 True Az=112.995 Ze=-65.925 Az status=0008 Ze status=0009 12:04:01 Check angles 12:04:01 SkyScan query 12:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.895<-17793 Statuses=0008 0009 12:04:02 Msec=2250 True Az=112.995 Ze=-86.895 Az status=0008 Ze status=0009 12:04:02 Check angles 12:04:02 SkyScan query 12:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.27<-19218 Statuses=0008 0009 12:04:02 Msec=3000 True Az=112.995 Ze=-108.27 Az status=0008 Ze status=0009 12:04:02 Check angles 12:04:02 SkyScan query 12:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.225<-20615 Statuses=0008 0009 12:04:03 Msec=3750 True Az=112.995 Ze=-129.225 Az status=0008 Ze status=0009 12:04:03 Check angles 12:04:03 SkyScan query 12:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.18<-22012 Statuses=0008 0009 12:04:04 Msec=4500 True Az=112.995 Ze=-150.18 Az status=0008 Ze status=0009 12:04:04 Check angles 12:04:04 SkyScan query 12:04:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-171<-23400 Statuses=0008 0009 12:04:05 Msec=5250 True Az=112.995 Ze=-171 Az status=0008 Ze status=0009 12:04:05 Check angles 12:04:05 SkyScan query 12:04:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:04:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:04:05 Message to Master queued w/err=0: serial=50702 error=0 12:04:10 Received message from Master: op=Filter serial=50703 12:04:10 Color wheel filter change from 0 to 0 12:04:10 FLIGetFilterPos err=0 currentPosition=0 12:04:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:10 Filter is already there-color wheel unchanged 12:04:10 Received message from Master: op=Shutter serial=50704 12:04:10 Shutter LASER open 12:04:11 Received message from Camera: op=State serial=50706 12:04:11 GetSingleValue result=40 Value=cccccccc 12:04:11 SkyScan query 12:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:04:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:11 Parameters OK 12:04:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:11 Set A/D data flow result=40 12:04:11 Set A/D channel type result=40 12:04:11 Set A/D encoding result=40 12:04:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:11 Set channel filter=0.000000e+000 result=40 12:04:11 Config A/D Result=40 12:04:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:11 Get A/D filter: -9.255963e+061 result=40 12:04:11 Get A/D value=-858993460 result=40 12:04:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:11 Parameters OK 12:04:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:11 Set A/D data flow result=40 12:04:11 Set A/D channel type result=40 12:04:11 Set A/D encoding result=40 12:04:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:11 Set channel filter=0.000000e+000 result=40 12:04:11 Config A/D Result=40 12:04:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:11 Get A/D filter: -9.255963e+061 result=40 12:04:11 Get A/D value=-858993460 result=40 12:04:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:11 Aux= 12:04:11 Message to Camera, serial 50706 queued 12:04:20 Received message from Master: op=Shutter serial=50716 12:04:20 Shutter LASER close 12:04:20 Received message from Master: op=PointingHead serial=50720 12:04:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:04:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:04:21 Point started: ret=0 12:04:21 point_skyscan result=0 12:04:21 Check angles 12:04:21 SkyScan query 12:04:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 12:04:22 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 12:04:22 Check angles 12:04:22 SkyScan query 12:04:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 12:04:23 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 12:04:23 Check angles 12:04:23 SkyScan query 12:04:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 12:04:23 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 12:04:24 Check angles 12:04:24 SkyScan query 12:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 12:04:24 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 12:04:24 Check angles 12:04:24 SkyScan query 12:04:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.95<-15930 Statuses=0008 0009 12:04:25 Msec=3000 True Az=112.995 Ze=-58.95 Az status=0008 Ze status=0009 12:04:25 Check angles 12:04:25 SkyScan query 12:04:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 12:04:26 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 12:04:26 Check angles 12:04:26 SkyScan query 12:04:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.575<-13105 Statuses=0008 0009 12:04:26 Msec=4500 True Az=112.995 Ze=-16.575 Az status=0008 Ze status=0009 12:04:27 Check angles 12:04:27 SkyScan query 12:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=4.65<-11690 Statuses=0008 0009 12:04:27 Msec=5250 True Az=112.995 Ze=4.65 Az status=0008 Ze status=0009 12:04:27 Check angles 12:04:27 SkyScan query 12:04:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:04:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:04:28 Message to Master queued w/err=0: serial=50720 error=0 12:04:33 Received message from Master: op=Filter serial=50721 12:04:33 Color wheel filter change from 0 to 0 12:04:33 FLIGetFilterPos err=0 currentPosition=0 12:04:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:33 Filter is already there-color wheel unchanged 12:04:33 Received message from Master: op=Shutter serial=50722 12:04:33 Shutter LASER close 12:04:33 Received message from Camera: op=State serial=50724 12:04:33 GetSingleValue result=40 Value=cccccccc 12:04:33 SkyScan query 12:04:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:34 Parameters OK 12:04:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:34 Set A/D data flow result=40 12:04:34 Set A/D channel type result=40 12:04:34 Set A/D encoding result=40 12:04:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:34 Set channel filter=0.000000e+000 result=40 12:04:34 Config A/D Result=40 12:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:34 Get A/D filter: -9.255963e+061 result=40 12:04:34 Get A/D value=-858993460 result=40 12:04:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:34 Parameters OK 12:04:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:34 Set A/D data flow result=40 12:04:34 Set A/D channel type result=40 12:04:34 Set A/D encoding result=40 12:04:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:34 Set channel filter=0.000000e+000 result=40 12:04:34 Config A/D Result=40 12:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:34 Get A/D filter: -9.255963e+061 result=40 12:04:34 Get A/D value=-858993460 result=40 12:04:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:34 Aux= 12:04:34 Message to Camera, serial 50724 queued 12:05:11 Received message from Master: op=PointingHead serial=50737 12:05:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:05:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:05:11 Point started: ret=0 12:05:11 point_skyscan result=0 12:05:12 Check angles 12:05:12 SkyScan query 12:05:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:05:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:05:12 Message to Master queued w/err=0: serial=50737 error=0 12:05:17 Received message from Master: op=Filter serial=50738 12:05:17 Color wheel filter change from 0 to 0 12:05:17 FLIGetFilterPos err=0 currentPosition=0 12:05:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:17 Filter is already there-color wheel unchanged 12:05:17 Received message from Master: op=Shutter serial=50739 12:05:17 Shutter LASER close 12:05:18 Received message from Camera: op=State serial=50741 12:05:18 GetSingleValue result=40 Value=cccccccc 12:05:18 SkyScan query 12:05:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:05:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:18 Parameters OK 12:05:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:18 Set A/D data flow result=40 12:05:18 Set A/D channel type result=40 12:05:18 Set A/D encoding result=40 12:05:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:18 Set channel filter=0.000000e+000 result=40 12:05:18 Config A/D Result=40 12:05:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:18 Get A/D filter: -9.255963e+061 result=40 12:05:18 Get A/D value=-858993460 result=40 12:05:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:18 Parameters OK 12:05:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:18 Set A/D data flow result=40 12:05:18 Set A/D channel type result=40 12:05:18 Set A/D encoding result=40 12:05:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:18 Set channel filter=0.000000e+000 result=40 12:05:18 Config A/D Result=40 12:05:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:18 Get A/D filter: -9.255963e+061 result=40 12:05:18 Get A/D value=-858993460 result=40 12:05:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:18 Aux= 12:05:18 Message to Camera, serial 50741 queued 12:05:55 Received message from Master: op=PointingHead serial=50754 12:05:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:05:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:05:55 Point started: ret=0 12:05:55 point_skyscan result=0 12:05:56 Check angles 12:05:56 SkyScan query 12:05:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:05:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:05:57 Message to Master queued w/err=0: serial=50754 error=0 12:06:02 Received message from Master: op=Filter serial=50755 12:06:02 Color wheel filter change from 0 to 0 12:06:02 FLIGetFilterPos err=0 currentPosition=0 12:06:02 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:02 Filter is already there-color wheel unchanged 12:06:02 Received message from Master: op=Shutter serial=50756 12:06:02 Shutter LASER close 12:06:02 Received message from Camera: op=State serial=50758 12:06:02 GetSingleValue result=40 Value=cccccccc 12:06:02 SkyScan query 12:06:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:06:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:02 Parameters OK 12:06:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:02 Set A/D data flow result=40 12:06:02 Set A/D channel type result=40 12:06:02 Set A/D encoding result=40 12:06:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:02 Set channel filter=0.000000e+000 result=40 12:06:02 Config A/D Result=40 12:06:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:02 Get A/D filter: -9.255963e+061 result=40 12:06:02 Get A/D value=-858993460 result=40 12:06:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:02 Parameters OK 12:06:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:02 Set A/D data flow result=40 12:06:02 Set A/D channel type result=40 12:06:02 Set A/D encoding result=40 12:06:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:02 Set channel filter=0.000000e+000 result=40 12:06:02 Config A/D Result=40 12:06:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:02 Get A/D filter: -9.255963e+061 result=40 12:06:02 Get A/D value=-858993460 result=40 12:06:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:02 Aux= 12:06:02 Message to Camera, serial 50758 queued 12:06:39 Received message from Master: op=PointingHead serial=50771 12:06:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:06:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:06:40 Point started: ret=0 12:06:40 point_skyscan result=0 12:06:40 Check angles 12:06:40 SkyScan query 12:06:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:06:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:06:41 Message to Master queued w/err=0: serial=50771 error=0 12:06:46 Received message from Master: op=Filter serial=50772 12:06:46 Color wheel filter change from 0 to 0 12:06:46 FLIGetFilterPos err=0 currentPosition=0 12:06:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:46 Filter is already there-color wheel unchanged 12:06:46 Received message from Master: op=Shutter serial=50773 12:06:46 Shutter LASER close 12:06:46 Received message from Camera: op=State serial=50775 12:06:46 GetSingleValue result=40 Value=cccccccc 12:06:46 SkyScan query 12:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:06:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:47 Parameters OK 12:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:47 Set A/D data flow result=40 12:06:47 Set A/D channel type result=40 12:06:47 Set A/D encoding result=40 12:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:47 Set channel filter=0.000000e+000 result=40 12:06:47 Config A/D Result=40 12:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:47 Get A/D filter: -9.255963e+061 result=40 12:06:47 Get A/D value=-858993460 result=40 12:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:47 Parameters OK 12:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:47 Set A/D data flow result=40 12:06:47 Set A/D channel type result=40 12:06:47 Set A/D encoding result=40 12:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:47 Set channel filter=0.000000e+000 result=40 12:06:47 Config A/D Result=40 12:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:47 Get A/D filter: -9.255963e+061 result=40 12:06:47 Get A/D value=-858993460 result=40 12:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:47 Aux= 12:06:47 Message to Camera, serial 50775 queued 12:07:24 Received message from Master: op=PointingHead serial=50788 12:07:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:07:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:07:24 Point started: ret=0 12:07:24 point_skyscan result=0 12:07:25 Check angles 12:07:25 SkyScan query 12:07:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 12:07:25 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 12:07:25 Check angles 12:07:25 SkyScan query 12:07:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 12:07:26 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 12:07:26 Check angles 12:07:26 SkyScan query 12:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 12:07:27 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 12:07:27 Check angles 12:07:27 SkyScan query 12:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 12:07:27 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 12:07:28 Check angles 12:07:28 SkyScan query 12:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.89<-19126 Statuses=0008 0009 12:07:28 Msec=3000 True Az=112.995 Ze=-106.89 Az status=0008 Ze status=0009 12:07:28 Check angles 12:07:28 SkyScan query 12:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.86<-20524 Statuses=0008 0009 12:07:29 Msec=3750 True Az=112.995 Ze=-127.86 Az status=0008 Ze status=0009 12:07:29 Check angles 12:07:29 SkyScan query 12:07:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.815<-21921 Statuses=0008 0009 12:07:30 Msec=4500 True Az=112.995 Ze=-148.815 Az status=0008 Ze status=0009 12:07:30 Check angles 12:07:30 SkyScan query 12:07:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.755<-23317 Statuses=0008 0009 12:07:30 Msec=5250 True Az=112.995 Ze=-169.755 Az status=0008 Ze status=0009 12:07:31 Check angles 12:07:31 SkyScan query 12:07:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:07:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:07:31 Message to Master queued w/err=0: serial=50788 error=0 12:07:36 Received message from Master: op=Filter serial=50789 12:07:36 Color wheel filter change from 0 to 0 12:07:36 FLIGetFilterPos err=0 currentPosition=0 12:07:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:36 Filter is already there-color wheel unchanged 12:07:36 Received message from Master: op=Shutter serial=50790 12:07:36 Shutter LASER open 12:07:37 Received message from Camera: op=State serial=50792 12:07:37 GetSingleValue result=40 Value=cccccccc 12:07:37 SkyScan query 12:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:07:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:37 Parameters OK 12:07:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:37 Set A/D data flow result=40 12:07:37 Set A/D channel type result=40 12:07:37 Set A/D encoding result=40 12:07:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:37 Set channel filter=0.000000e+000 result=40 12:07:37 Config A/D Result=40 12:07:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:37 Get A/D filter: -9.255963e+061 result=40 12:07:37 Get A/D value=-858993460 result=40 12:07:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:37 Parameters OK 12:07:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:37 Set A/D data flow result=40 12:07:37 Set A/D channel type result=40 12:07:37 Set A/D encoding result=40 12:07:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:37 Set channel filter=0.000000e+000 result=40 12:07:37 Config A/D Result=40 12:07:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:37 Get A/D filter: -9.255963e+061 result=40 12:07:37 Get A/D value=-858993460 result=40 12:07:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:37 Aux= 12:07:37 Message to Camera, serial 50792 queued 12:07:46 Received message from Master: op=Shutter serial=50802 12:07:46 Shutter LASER close 12:07:46 Received message from Master: op=PointingHead serial=50806 12:07:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:07:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:07:46 Point started: ret=0 12:07:46 point_skyscan result=0 12:07:47 Check angles 12:07:47 SkyScan query 12:07:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 12:07:48 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 12:07:48 Check angles 12:07:48 SkyScan query 12:07:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 12:07:49 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 12:07:49 Check angles 12:07:49 SkyScan query 12:07:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 12:07:49 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 12:07:49 Check angles 12:07:49 SkyScan query 12:07:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.115<-17341 Statuses=0008 0009 12:07:50 Msec=2250 True Az=112.995 Ze=-80.115 Az status=0008 Ze status=0009 12:07:50 Check angles 12:07:50 SkyScan query 12:07:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.13<-15942 Statuses=0008 0009 12:07:51 Msec=3000 True Az=112.995 Ze=-59.13 Az status=0008 Ze status=0009 12:07:51 Check angles 12:07:51 SkyScan query 12:07:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.175<-14545 Statuses=0008 0009 12:07:52 Msec=3750 True Az=112.995 Ze=-38.175 Az status=0008 Ze status=0009 12:07:52 Check angles 12:07:52 SkyScan query 12:07:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.25<-13150 Statuses=0008 0009 12:07:52 Msec=4500 True Az=112.995 Ze=-17.25 Az status=0008 Ze status=0009 12:07:52 Check angles 12:07:52 SkyScan query 12:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=3.735<-11751 Statuses=0008 0009 12:07:53 Msec=5250 True Az=112.995 Ze=3.735 Az status=0008 Ze status=0009 12:07:53 Check angles 12:07:53 SkyScan query 12:07:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:07:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:07:54 Message to Master queued w/err=0: serial=50806 error=0 12:07:59 Received message from Master: op=Filter serial=50807 12:07:59 Color wheel filter change from 0 to 0 12:07:59 FLIGetFilterPos err=0 currentPosition=0 12:07:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:59 Filter is already there-color wheel unchanged 12:07:59 Received message from Master: op=Shutter serial=50808 12:07:59 Shutter LASER close 12:07:59 Received message from Camera: op=State serial=50810 12:07:59 GetSingleValue result=40 Value=cccccccc 12:07:59 SkyScan query 12:08:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:08:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:00 Parameters OK 12:08:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:00 Set A/D data flow result=40 12:08:00 Set A/D channel type result=40 12:08:00 Set A/D encoding result=40 12:08:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:00 Set channel filter=0.000000e+000 result=40 12:08:00 Config A/D Result=40 12:08:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:00 Get A/D filter: -9.255963e+061 result=40 12:08:00 Get A/D value=-858993460 result=40 12:08:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:00 Parameters OK 12:08:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:00 Set A/D data flow result=40 12:08:00 Set A/D channel type result=40 12:08:00 Set A/D encoding result=40 12:08:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:00 Set channel filter=0.000000e+000 result=40 12:08:00 Config A/D Result=40 12:08:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:00 Get A/D filter: -9.255963e+061 result=40 12:08:00 Get A/D value=-858993460 result=40 12:08:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:00 Aux= 12:08:00 Message to Camera, serial 50810 queued 12:08:36 Received message from Master: op=PointingHead serial=50822 12:08:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:08:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:08:36 Point started: ret=0 12:08:36 point_skyscan result=0 12:08:37 Check angles 12:08:37 SkyScan query 12:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:08:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:08:37 Message to Master queued w/err=0: serial=50822 error=0 12:08:42 Received message from Master: op=Filter serial=50823 12:08:42 Color wheel filter change from 0 to 0 12:08:42 FLIGetFilterPos err=0 currentPosition=0 12:08:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:42 Filter is already there-color wheel unchanged 12:08:42 Received message from Master: op=Shutter serial=50824 12:08:42 Shutter LASER close 12:08:43 Received message from Camera: op=State serial=50826 12:08:43 GetSingleValue result=40 Value=cccccccc 12:08:43 SkyScan query 12:08:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:08:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:43 Parameters OK 12:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:43 Set A/D data flow result=40 12:08:43 Set A/D channel type result=40 12:08:43 Set A/D encoding result=40 12:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:43 Set channel filter=0.000000e+000 result=40 12:08:43 Config A/D Result=40 12:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:43 Get A/D filter: -9.255963e+061 result=40 12:08:43 Get A/D value=-858993460 result=40 12:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:43 Parameters OK 12:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:43 Set A/D data flow result=40 12:08:43 Set A/D channel type result=40 12:08:43 Set A/D encoding result=40 12:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:43 Set channel filter=0.000000e+000 result=40 12:08:43 Config A/D Result=40 12:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:43 Get A/D filter: -9.255963e+061 result=40 12:08:43 Get A/D value=-858993460 result=40 12:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:43 Aux= 12:08:43 Message to Camera, serial 50826 queued 12:09:19 Received message from Master: op=PointingHead serial=50838 12:09:19 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:09:19 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:09:19 Point started: ret=0 12:09:19 point_skyscan result=0 12:09:20 Check angles 12:09:20 SkyScan query 12:09:21 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 12:09:21 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 12:09:21 Check angles 12:09:21 SkyScan query 12:09:21 SkyScan query done: ret=0 az=154.005<-10267 ze=-6.51<-12434 Statuses=0009 0008 12:09:21 Msec=750 True Az=154.005 Ze=-6.51 Az status=0009 Ze status=0008 12:09:22 Check angles 12:09:22 SkyScan query 12:09:22 SkyScan query done: ret=0 az=171.555<-11437 ze=-6.495<-12433 Statuses=0009 0008 12:09:22 Msec=1500 True Az=171.555 Ze=-6.495 Az status=0009 Ze status=0008 12:09:22 Check angles 12:09:22 SkyScan query 12:09:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:09:23 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:09:23 Message to Master queued w/err=0: serial=50838 error=0 12:09:28 Received message from Master: op=Filter serial=50839 12:09:28 Color wheel filter change from 0 to 0 12:09:28 FLIGetFilterPos err=0 currentPosition=0 12:09:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:28 Filter is already there-color wheel unchanged 12:09:28 Received message from Master: op=Shutter serial=50840 12:09:28 Shutter LASER close 12:09:28 Received message from Camera: op=State serial=50842 12:09:28 GetSingleValue result=40 Value=cccccccc 12:09:28 SkyScan query 12:09:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:09:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:29 Parameters OK 12:09:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:29 Set A/D data flow result=40 12:09:29 Set A/D channel type result=40 12:09:29 Set A/D encoding result=40 12:09:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:29 Set channel filter=0.000000e+000 result=40 12:09:29 Config A/D Result=40 12:09:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:29 Get A/D filter: -9.255963e+061 result=40 12:09:29 Get A/D value=-858993460 result=40 12:09:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:29 Parameters OK 12:09:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:29 Set A/D data flow result=40 12:09:29 Set A/D channel type result=40 12:09:29 Set A/D encoding result=40 12:09:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:29 Set channel filter=0.000000e+000 result=40 12:09:29 Config A/D Result=40 12:09:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:29 Get A/D filter: -9.255963e+061 result=40 12:09:29 Get A/D value=-858993460 result=40 12:09:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:29 Aux= 12:09:29 Message to Camera, serial 50842 queued 12:10:06 Received message from Master: op=PointingHead serial=50855 12:10:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:10:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:10:06 Point started: ret=0 12:10:06 point_skyscan result=0 12:10:07 Check angles 12:10:07 SkyScan query 12:10:07 SkyScan query done: ret=0 az=152.58<-10172 ze=6.51<-11566 Statuses=0009 0008 12:10:07 Msec=0 True Az=152.58 Ze=6.51 Az status=0009 Ze status=0008 12:10:07 Check angles 12:10:07 SkyScan query 12:10:08 SkyScan query done: ret=0 az=135.165<-9011 ze=6.495<-11567 Statuses=0009 0008 12:10:08 Msec=750 True Az=135.165 Ze=6.495 Az status=0009 Ze status=0008 12:10:08 Check angles 12:10:08 SkyScan query 12:10:09 SkyScan query done: ret=0 az=117.51<-7834 ze=6.495<-11567 Statuses=0009 0008 12:10:09 Msec=1500 True Az=117.51 Ze=6.495 Az status=0009 Ze status=0008 12:10:09 Check angles 12:10:09 SkyScan query 12:10:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:10:09 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:10:09 Message to Master queued w/err=0: serial=50855 error=0 12:10:14 Received message from Master: op=Filter serial=50856 12:10:14 Color wheel filter change from 0 to 0 12:10:14 FLIGetFilterPos err=0 currentPosition=0 12:10:14 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:14 Filter is already there-color wheel unchanged 12:10:15 Received message from Master: op=Shutter serial=50857 12:10:15 Shutter LASER close 12:10:15 Received message from Camera: op=State serial=50859 12:10:15 GetSingleValue result=40 Value=cccccccc 12:10:15 SkyScan query 12:10:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:10:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:15 Parameters OK 12:10:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:15 Set A/D data flow result=40 12:10:15 Set A/D channel type result=40 12:10:15 Set A/D encoding result=40 12:10:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:15 Set channel filter=0.000000e+000 result=40 12:10:15 Config A/D Result=40 12:10:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:15 Get A/D filter: -9.255963e+061 result=40 12:10:15 Get A/D value=-858993460 result=40 12:10:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:15 Parameters OK 12:10:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:15 Set A/D data flow result=40 12:10:15 Set A/D channel type result=40 12:10:15 Set A/D encoding result=40 12:10:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:15 Set channel filter=0.000000e+000 result=40 12:10:15 Config A/D Result=40 12:10:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:15 Get A/D filter: -9.255963e+061 result=40 12:10:15 Get A/D value=-858993460 result=40 12:10:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:10:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:10:15 Aux= 12:10:15 Message to Camera, serial 50859 queued 12:10:51 Received message from Master: op=PointingHead serial=50871 12:10:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:10:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:10:51 Point started: ret=0 12:10:51 point_skyscan result=0 12:10:52 Check angles 12:10:52 SkyScan query 12:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 12:10:53 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 12:10:53 Check angles 12:10:53 SkyScan query 12:10:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 12:10:54 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 12:10:54 Check angles 12:10:54 SkyScan query 12:10:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 12:10:54 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 12:10:54 Check angles 12:10:54 SkyScan query 12:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 12:10:55 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 12:10:55 Check angles 12:10:55 SkyScan query 12:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.325<-19155 Statuses=0008 0009 12:10:56 Msec=3000 True Az=112.995 Ze=-107.325 Az status=0008 Ze status=0009 12:10:56 Check angles 12:10:56 SkyScan query 12:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.28<-20552 Statuses=0008 0009 12:10:57 Msec=3750 True Az=112.995 Ze=-128.28 Az status=0008 Ze status=0009 12:10:57 Check angles 12:10:57 SkyScan query 12:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.235<-21949 Statuses=0008 0009 12:10:57 Msec=4500 True Az=112.995 Ze=-149.235 Az status=0008 Ze status=0009 12:10:57 Check angles 12:10:57 SkyScan query 12:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.175<-23345 Statuses=0008 0009 12:10:58 Msec=5250 True Az=112.995 Ze=-170.175 Az status=0008 Ze status=0009 12:10:58 Check angles 12:10:58 SkyScan query 12:10:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:10:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:10:59 Message to Master queued w/err=0: serial=50871 error=0 12:11:04 Received message from Master: op=Filter serial=50872 12:11:04 Color wheel filter change from 0 to 0 12:11:04 FLIGetFilterPos err=0 currentPosition=0 12:11:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:04 Filter is already there-color wheel unchanged 12:11:04 Received message from Master: op=Shutter serial=50873 12:11:04 Shutter LASER open 12:11:04 Received message from Camera: op=State serial=50875 12:11:04 GetSingleValue result=40 Value=cccccccc 12:11:04 SkyScan query 12:11:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:11:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:05 Parameters OK 12:11:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:05 Set A/D data flow result=40 12:11:05 Set A/D channel type result=40 12:11:05 Set A/D encoding result=40 12:11:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:05 Set channel filter=0.000000e+000 result=40 12:11:05 Config A/D Result=40 12:11:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:05 Get A/D filter: -9.255963e+061 result=40 12:11:05 Get A/D value=-858993460 result=40 12:11:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:05 Parameters OK 12:11:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:05 Set A/D data flow result=40 12:11:05 Set A/D channel type result=40 12:11:05 Set A/D encoding result=40 12:11:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:05 Set channel filter=0.000000e+000 result=40 12:11:05 Config A/D Result=40 12:11:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:05 Get A/D filter: -9.255963e+061 result=40 12:11:05 Get A/D value=-858993460 result=40 12:11:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:05 Aux= 12:11:05 Message to Camera, serial 50875 queued 12:11:13 Received message from Master: op=Shutter serial=50885 12:11:13 Shutter LASER close 12:11:14 Received message from Master: op=PointingHead serial=50889 12:11:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:11:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:11:14 Point started: ret=0 12:11:14 point_skyscan result=0 12:11:15 Check angles 12:11:15 SkyScan query 12:11:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.77<-21518 Statuses=0008 0009 12:11:15 Msec=0 True Az=112.995 Ze=-142.77 Az status=0008 Ze status=0009 12:11:15 Check angles 12:11:15 SkyScan query 12:11:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 12:11:16 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 12:11:16 Check angles 12:11:16 SkyScan query 12:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.86<-18724 Statuses=0008 0009 12:11:17 Msec=1500 True Az=112.995 Ze=-100.86 Az status=0008 Ze status=0009 12:11:17 Check angles 12:11:17 SkyScan query 12:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 12:11:18 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 12:11:18 Check angles 12:11:18 SkyScan query 12:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.95<-15930 Statuses=0008 0009 12:11:18 Msec=3000 True Az=112.995 Ze=-58.95 Az status=0008 Ze status=0009 12:11:18 Check angles 12:11:18 SkyScan query 12:11:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 12:11:19 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 12:11:19 Check angles 12:11:19 SkyScan query 12:11:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.575<-13105 Statuses=0008 0009 12:11:20 Msec=4500 True Az=112.995 Ze=-16.575 Az status=0008 Ze status=0009 12:11:20 Check angles 12:11:20 SkyScan query 12:11:21 SkyScan query done: ret=0 az=112.995<-7533 ze=4.305<-11713 Statuses=0008 0009 12:11:21 Msec=5250 True Az=112.995 Ze=4.305 Az status=0008 Ze status=0009 12:11:21 Check angles 12:11:21 SkyScan query 12:11:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:11:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:11:21 Message to Master queued w/err=0: serial=50889 error=0 12:11:26 Received message from Master: op=Filter serial=50890 12:11:26 Color wheel filter change from 0 to 0 12:11:26 FLIGetFilterPos err=0 currentPosition=0 12:11:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:26 Filter is already there-color wheel unchanged 12:11:26 Received message from Master: op=Shutter serial=50891 12:11:26 Shutter LASER close 12:11:27 Received message from Camera: op=State serial=50893 12:11:27 GetSingleValue result=40 Value=cccccccc 12:11:27 SkyScan query 12:11:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:27 Parameters OK 12:11:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:27 Set A/D data flow result=40 12:11:27 Set A/D channel type result=40 12:11:27 Set A/D encoding result=40 12:11:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:27 Set channel filter=0.000000e+000 result=40 12:11:27 Config A/D Result=40 12:11:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:27 Get A/D filter: -9.255963e+061 result=40 12:11:27 Get A/D value=-858993460 result=40 12:11:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:27 Parameters OK 12:11:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:27 Set A/D data flow result=40 12:11:27 Set A/D channel type result=40 12:11:27 Set A/D encoding result=40 12:11:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:27 Set channel filter=0.000000e+000 result=40 12:11:27 Config A/D Result=40 12:11:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:27 Get A/D filter: -9.255963e+061 result=40 12:11:27 Get A/D value=-858993460 result=40 12:11:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:27 Aux= 12:11:27 Message to Camera, serial 50893 queued 12:12:04 Received message from Master: op=PointingHead serial=50906 12:12:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:12:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:12:04 Point started: ret=0 12:12:04 point_skyscan result=0 12:12:05 Check angles 12:12:05 SkyScan query 12:12:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:12:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:12:06 Message to Master queued w/err=0: serial=50906 error=0 12:12:11 Received message from Master: op=Filter serial=50907 12:12:11 Color wheel filter change from 0 to 0 12:12:11 FLIGetFilterPos err=0 currentPosition=0 12:12:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:11 Filter is already there-color wheel unchanged 12:12:11 Received message from Master: op=Shutter serial=50908 12:12:11 Shutter LASER close 12:12:11 Received message from Camera: op=State serial=50910 12:12:11 GetSingleValue result=40 Value=cccccccc 12:12:11 SkyScan query 12:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:12:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:11 Parameters OK 12:12:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:11 Set A/D data flow result=40 12:12:11 Set A/D channel type result=40 12:12:11 Set A/D encoding result=40 12:12:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:11 Set channel filter=0.000000e+000 result=40 12:12:11 Config A/D Result=40 12:12:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:11 Get A/D filter: -9.255963e+061 result=40 12:12:11 Get A/D value=-858993460 result=40 12:12:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:11 Parameters OK 12:12:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:11 Set A/D data flow result=40 12:12:11 Set A/D channel type result=40 12:12:11 Set A/D encoding result=40 12:12:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:11 Set channel filter=0.000000e+000 result=40 12:12:11 Config A/D Result=40 12:12:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:11 Get A/D filter: -9.255963e+061 result=40 12:12:11 Get A/D value=-858993460 result=40 12:12:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:11 Aux= 12:12:11 Message to Camera, serial 50910 queued 12:12:48 Received message from Master: op=PointingHead serial=50923 12:12:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:12:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:12:49 Point started: ret=0 12:12:49 point_skyscan result=0 12:12:49 Check angles 12:12:49 SkyScan query 12:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:12:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:12:50 Message to Master queued w/err=0: serial=50923 error=0 12:12:55 Received message from Master: op=Filter serial=50924 12:12:55 Color wheel filter change from 0 to 0 12:12:55 FLIGetFilterPos err=0 currentPosition=0 12:12:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:55 Filter is already there-color wheel unchanged 12:12:55 Received message from Master: op=Shutter serial=50925 12:12:55 Shutter LASER close 12:12:55 Received message from Camera: op=State serial=50927 12:12:55 GetSingleValue result=40 Value=cccccccc 12:12:55 SkyScan query 12:12:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:12:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:56 Parameters OK 12:12:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:56 Set A/D data flow result=40 12:12:56 Set A/D channel type result=40 12:12:56 Set A/D encoding result=40 12:12:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:56 Set channel filter=0.000000e+000 result=40 12:12:56 Config A/D Result=40 12:12:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:56 Get A/D filter: -9.255963e+061 result=40 12:12:56 Get A/D value=-858993460 result=40 12:12:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:56 Parameters OK 12:12:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:56 Set A/D data flow result=40 12:12:56 Set A/D channel type result=40 12:12:56 Set A/D encoding result=40 12:12:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:56 Set channel filter=0.000000e+000 result=40 12:12:56 Config A/D Result=40 12:12:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:56 Get A/D filter: -9.255963e+061 result=40 12:12:56 Get A/D value=-858993460 result=40 12:12:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:56 Aux= 12:12:56 Message to Camera, serial 50927 queued 12:13:33 Received message from Master: op=PointingHead serial=50940 12:13:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:13:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:13:33 Point started: ret=0 12:13:33 point_skyscan result=0 12:13:34 Check angles 12:13:34 SkyScan query 12:13:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:13:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:13:34 Message to Master queued w/err=0: serial=50940 error=0 12:13:39 Received message from Master: op=Filter serial=50941 12:13:39 Color wheel filter change from 0 to 0 12:13:39 FLIGetFilterPos err=0 currentPosition=0 12:13:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:39 Filter is already there-color wheel unchanged 12:13:39 Received message from Master: op=Shutter serial=50942 12:13:39 Shutter LASER close 12:13:39 Received message from Camera: op=State serial=50944 12:13:39 GetSingleValue result=40 Value=cccccccc 12:13:39 SkyScan query 12:13:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:13:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:40 Parameters OK 12:13:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:40 Set A/D data flow result=40 12:13:40 Set A/D channel type result=40 12:13:40 Set A/D encoding result=40 12:13:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:40 Set channel filter=0.000000e+000 result=40 12:13:40 Config A/D Result=40 12:13:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:40 Get A/D filter: -9.255963e+061 result=40 12:13:40 Get A/D value=-858993460 result=40 12:13:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:40 Parameters OK 12:13:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:40 Set A/D data flow result=40 12:13:40 Set A/D channel type result=40 12:13:40 Set A/D encoding result=40 12:13:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:40 Set channel filter=0.000000e+000 result=40 12:13:40 Config A/D Result=40 12:13:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:40 Get A/D filter: -9.255963e+061 result=40 12:13:40 Get A/D value=-858993460 result=40 12:13:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:40 Aux= 12:13:40 Message to Camera, serial 50944 queued 12:14:16 Received message from Master: op=PointingHead serial=50956 12:14:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:14:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:14:16 Point started: ret=0 12:14:16 point_skyscan result=0 12:14:17 Check angles 12:14:17 SkyScan query 12:14:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 12:14:18 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 12:14:18 Check angles 12:14:18 SkyScan query 12:14:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 [UTC 2019-3-1 12:14:18] 12:14:18 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 12:14:19 Check angles 12:14:19 SkyScan query 12:14:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 12:14:19 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 12:14:19 Check angles 12:14:19 SkyScan query 12:14:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 12:14:20 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 12:14:20 Check angles 12:14:20 SkyScan query 12:14:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.73<-19182 Statuses=0008 0009 12:14:21 Msec=3000 True Az=112.995 Ze=-107.73 Az status=0008 Ze status=0009 12:14:21 Check angles 12:14:21 SkyScan query 12:14:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 12:14:21 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 12:14:22 Check angles 12:14:22 SkyScan query 12:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.075<-22005 Statuses=0008 0009 12:14:22 Msec=4500 True Az=112.995 Ze=-150.075 Az status=0008 Ze status=0009 12:14:22 Check angles 12:14:22 SkyScan query 12:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 12:14:23 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 12:14:23 Check angles 12:14:23 SkyScan query 12:14:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:14:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:14:24 Message to Master queued w/err=0: serial=50956 error=0 12:14:29 Received message from Master: op=Filter serial=50957 12:14:29 Color wheel filter change from 0 to 0 12:14:29 FLIGetFilterPos err=0 currentPosition=0 12:14:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:29 Filter is already there-color wheel unchanged 12:14:29 Received message from Master: op=Shutter serial=50958 12:14:29 Shutter LASER open 12:14:29 Received message from Camera: op=State serial=50960 12:14:29 GetSingleValue result=40 Value=cccccccc 12:14:29 SkyScan query 12:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:14:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:30 Parameters OK 12:14:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:30 Set A/D data flow result=40 12:14:30 Set A/D channel type result=40 12:14:30 Set A/D encoding result=40 12:14:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:30 Set channel filter=0.000000e+000 result=40 12:14:30 Config A/D Result=40 12:14:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:30 Get A/D filter: -9.255963e+061 result=40 12:14:30 Get A/D value=-858993460 result=40 12:14:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:30 Parameters OK 12:14:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:30 Set A/D data flow result=40 12:14:30 Set A/D channel type result=40 12:14:30 Set A/D encoding result=40 12:14:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:30 Set channel filter=0.000000e+000 result=40 12:14:30 Config A/D Result=40 12:14:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:30 Get A/D filter: -9.255963e+061 result=40 12:14:30 Get A/D value=-858993460 result=40 12:14:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:30 Aux= 12:14:30 Message to Camera, serial 50960 queued 12:14:38 Received message from Master: op=Shutter serial=50970 12:14:38 Shutter LASER close 12:14:39 Received message from Master: op=PointingHead serial=50974 12:14:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:14:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:14:39 Point started: ret=0 12:14:39 point_skyscan result=0 12:14:40 Check angles 12:14:40 SkyScan query 12:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.86<-21524 Statuses=0008 0009 12:14:40 Msec=0 True Az=112.995 Ze=-142.86 Az status=0008 Ze status=0009 12:14:40 Check angles 12:14:40 SkyScan query 12:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 12:14:41 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 12:14:41 Check angles 12:14:41 SkyScan query 12:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 12:14:42 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 12:14:42 Check angles 12:14:42 SkyScan query 12:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 12:14:43 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 12:14:43 Check angles 12:14:43 SkyScan query 12:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 12:14:43 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 12:14:43 Check angles 12:14:43 SkyScan query 12:14:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.1<-14540 Statuses=0008 0009 12:14:44 Msec=3750 True Az=112.995 Ze=-38.1 Az status=0008 Ze status=0009 12:14:44 Check angles 12:14:44 SkyScan query 12:14:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.16<-13144 Statuses=0008 0009 12:14:45 Msec=4500 True Az=112.995 Ze=-17.16 Az status=0008 Ze status=0009 12:14:45 Check angles 12:14:45 SkyScan query 12:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=3.81<-11746 Statuses=0008 0009 12:14:46 Msec=5250 True Az=112.995 Ze=3.81 Az status=0008 Ze status=0009 12:14:46 Check angles 12:14:46 SkyScan query 12:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:14:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:14:46 Message to Master queued w/err=0: serial=50974 error=0 12:14:51 Received message from Master: op=Filter serial=50975 12:14:51 Color wheel filter change from 0 to 0 12:14:51 FLIGetFilterPos err=0 currentPosition=0 12:14:51 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:51 Filter is already there-color wheel unchanged 12:14:51 Received message from Master: op=Shutter serial=50976 12:14:51 Shutter LASER close 12:14:52 Received message from Camera: op=State serial=50978 12:14:52 GetSingleValue result=40 Value=cccccccc 12:14:52 SkyScan query 12:14:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:14:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:52 Parameters OK 12:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:52 Set A/D data flow result=40 12:14:52 Set A/D channel type result=40 12:14:52 Set A/D encoding result=40 12:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:52 Set channel filter=0.000000e+000 result=40 12:14:52 Config A/D Result=40 12:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:52 Get A/D filter: -9.255963e+061 result=40 12:14:52 Get A/D value=-858993460 result=40 12:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:52 Parameters OK 12:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:52 Set A/D data flow result=40 12:14:52 Set A/D channel type result=40 12:14:52 Set A/D encoding result=40 12:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:52 Set channel filter=0.000000e+000 result=40 12:14:52 Config A/D Result=40 12:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:52 Get A/D filter: -9.255963e+061 result=40 12:14:52 Get A/D value=-858993460 result=40 12:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:52 Aux= 12:14:52 Message to Camera, serial 50978 queued 12:15:29 Received message from Master: op=PointingHead serial=50991 12:15:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:15:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:15:29 Point started: ret=0 12:15:29 point_skyscan result=0 12:15:30 Check angles 12:15:30 SkyScan query 12:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:15:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:15:31 Message to Master queued w/err=0: serial=50991 error=0 12:15:36 Received message from Master: op=Filter serial=50992 12:15:36 Color wheel filter change from 0 to 0 12:15:36 FLIGetFilterPos err=0 currentPosition=0 12:15:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:36 Filter is already there-color wheel unchanged 12:15:36 Received message from Master: op=Shutter serial=50993 12:15:36 Shutter LASER close 12:15:36 Received message from Camera: op=State serial=50995 12:15:36 GetSingleValue result=40 Value=cccccccc 12:15:36 SkyScan query 12:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:15:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:37 Parameters OK 12:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:37 Set A/D data flow result=40 12:15:37 Set A/D channel type result=40 12:15:37 Set A/D encoding result=40 12:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:37 Set channel filter=0.000000e+000 result=40 12:15:37 Config A/D Result=40 12:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:37 Get A/D filter: -9.255963e+061 result=40 12:15:37 Get A/D value=-858993460 result=40 12:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:37 Parameters OK 12:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:37 Set A/D data flow result=40 12:15:37 Set A/D channel type result=40 12:15:37 Set A/D encoding result=40 12:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:37 Set channel filter=0.000000e+000 result=40 12:15:37 Config A/D Result=40 12:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:37 Get A/D filter: -9.255963e+061 result=40 12:15:37 Get A/D value=-858993460 result=40 12:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:37 Aux= 12:15:37 Message to Camera, serial 50995 queued 12:16:13 Received message from Master: op=PointingHead serial=51008 12:16:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:16:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:16:14 Point started: ret=0 12:16:14 point_skyscan result=0 12:16:14 Check angles 12:16:14 SkyScan query 12:16:15 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 12:16:15 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 12:16:15 Check angles 12:16:15 SkyScan query 12:16:16 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.495<-12433 Statuses=0009 0008 12:16:16 Msec=750 True Az=153.51 Ze=-6.495 Az status=0009 Ze status=0008 12:16:16 Check angles 12:16:16 SkyScan query 12:16:17 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 12:16:17 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 12:16:17 Check angles 12:16:17 SkyScan query 12:16:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:16:17 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:16:17 Message to Master queued w/err=0: serial=51008 error=0 12:16:22 Received message from Master: op=Filter serial=51009 12:16:22 Color wheel filter change from 0 to 0 12:16:22 FLIGetFilterPos err=0 currentPosition=0 12:16:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:22 Filter is already there-color wheel unchanged 12:16:22 Received message from Master: op=Shutter serial=51010 12:16:22 Shutter LASER close 12:16:23 Received message from Camera: op=State serial=51012 12:16:23 GetSingleValue result=40 Value=cccccccc 12:16:23 SkyScan query 12:16:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:16:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:23 Parameters OK 12:16:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:23 Set A/D data flow result=40 12:16:23 Set A/D channel type result=40 12:16:23 Set A/D encoding result=40 12:16:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:23 Set channel filter=0.000000e+000 result=40 12:16:23 Config A/D Result=40 12:16:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:23 Get A/D filter: -9.255963e+061 result=40 12:16:23 Get A/D value=-858993460 result=40 12:16:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:23 Parameters OK 12:16:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:23 Set A/D data flow result=40 12:16:23 Set A/D channel type result=40 12:16:23 Set A/D encoding result=40 12:16:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:23 Set channel filter=0.000000e+000 result=40 12:16:23 Config A/D Result=40 12:16:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:23 Get A/D filter: -9.255963e+061 result=40 12:16:23 Get A/D value=-858993460 result=40 12:16:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:23 Aux= 12:16:23 Message to Camera, serial 51012 queued 12:17:00 Received message from Master: op=PointingHead serial=51025 12:17:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:17:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:17:00 Point started: ret=0 12:17:00 point_skyscan result=0 12:17:01 Check angles 12:17:01 SkyScan query 12:17:02 SkyScan query done: ret=0 az=152.64<-10176 ze=6.51<-11566 Statuses=0009 0008 12:17:02 Msec=0 True Az=152.64 Ze=6.51 Az status=0009 Ze status=0008 12:17:02 Check angles 12:17:02 SkyScan query 12:17:02 SkyScan query done: ret=0 az=134.955<-8997 ze=6.495<-11567 Statuses=0009 0008 12:17:02 Msec=750 True Az=134.955 Ze=6.495 Az status=0009 Ze status=0008 12:17:03 Check angles 12:17:03 SkyScan query 12:17:03 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 12:17:03 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 12:17:03 Check angles 12:17:03 SkyScan query 12:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:17:04 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:17:04 Message to Master queued w/err=0: serial=51025 error=0 12:17:09 Received message from Master: op=Filter serial=51026 12:17:09 Color wheel filter change from 0 to 0 12:17:09 FLIGetFilterPos err=0 currentPosition=0 12:17:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:09 Filter is already there-color wheel unchanged 12:17:09 Received message from Master: op=Shutter serial=51027 12:17:09 Shutter LASER close 12:17:09 Received message from Camera: op=State serial=51029 12:17:09 GetSingleValue result=40 Value=cccccccc 12:17:09 SkyScan query 12:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:17:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:10 Parameters OK 12:17:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:10 Set A/D data flow result=40 12:17:10 Set A/D channel type result=40 12:17:10 Set A/D encoding result=40 12:17:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:10 Set channel filter=0.000000e+000 result=40 12:17:10 Config A/D Result=40 12:17:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:10 Get A/D filter: -9.255963e+061 result=40 12:17:10 Get A/D value=-858993460 result=40 12:17:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:10 Parameters OK 12:17:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:10 Set A/D data flow result=40 12:17:10 Set A/D channel type result=40 12:17:10 Set A/D encoding result=40 12:17:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:10 Set channel filter=0.000000e+000 result=40 12:17:10 Config A/D Result=40 12:17:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:10 Get A/D filter: -9.255963e+061 result=40 12:17:10 Get A/D value=-858993460 result=40 12:17:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:10 Aux= 12:17:10 Message to Camera, serial 51029 queued 12:17:46 Received message from Master: op=PointingHead serial=51042 12:17:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:17:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:17:47 Point started: ret=0 12:17:47 point_skyscan result=0 12:17:48 Check angles 12:17:48 SkyScan query 12:17:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.655<-13577 Statuses=0008 0009 12:17:48 Msec=0 True Az=112.995 Ze=-23.655 Az status=0008 Ze status=0009 12:17:48 Check angles 12:17:48 SkyScan query 12:17:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.03<-15002 Statuses=0008 0009 12:17:49 Msec=750 True Az=112.995 Ze=-45.03 Az status=0008 Ze status=0009 12:17:49 Check angles 12:17:49 SkyScan query 12:17:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.985<-16399 Statuses=0008 0009 12:17:50 Msec=1500 True Az=112.995 Ze=-65.985 Az status=0008 Ze status=0009 12:17:50 Check angles 12:17:50 SkyScan query 12:17:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.925<-17795 Statuses=0008 0009 12:17:50 Msec=2250 True Az=112.995 Ze=-86.925 Az status=0008 Ze status=0009 12:17:51 Check angles 12:17:51 SkyScan query 12:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.895<-19193 Statuses=0008 0009 12:17:51 Msec=3000 True Az=112.995 Ze=-107.895 Az status=0008 Ze status=0009 12:17:51 Check angles 12:17:51 SkyScan query 12:17:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 12:17:52 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 12:17:52 Check angles 12:17:52 SkyScan query 12:17:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.79<-21986 Statuses=0008 0009 12:17:53 Msec=4500 True Az=112.995 Ze=-149.79 Az status=0008 Ze status=0009 12:17:53 Check angles 12:17:53 SkyScan query 12:17:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.7<-23380 Statuses=0008 0009 12:17:53 Msec=5250 True Az=112.995 Ze=-170.7 Az status=0008 Ze status=0009 12:17:54 Check angles 12:17:54 SkyScan query 12:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:17:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:17:54 Message to Master queued w/err=0: serial=51042 error=0 12:17:59 Received message from Master: op=Filter serial=51043 12:17:59 Color wheel filter change from 0 to 0 12:17:59 FLIGetFilterPos err=0 currentPosition=0 12:17:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:59 Filter is already there-color wheel unchanged 12:17:59 Received message from Master: op=Shutter serial=51044 12:17:59 Shutter LASER open 12:18:00 Received message from Camera: op=State serial=51046 12:18:00 GetSingleValue result=40 Value=cccccccc 12:18:00 SkyScan query 12:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:18:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:00 Parameters OK 12:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:00 Set A/D data flow result=40 12:18:00 Set A/D channel type result=40 12:18:00 Set A/D encoding result=40 12:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:00 Set channel filter=0.000000e+000 result=40 12:18:00 Config A/D Result=40 12:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:00 Get A/D filter: -9.255963e+061 result=40 12:18:00 Get A/D value=-858993460 result=40 12:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:00 Parameters OK 12:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:00 Set A/D data flow result=40 12:18:00 Set A/D channel type result=40 12:18:00 Set A/D encoding result=40 12:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:00 Set channel filter=0.000000e+000 result=40 12:18:00 Config A/D Result=40 12:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:00 Get A/D filter: -9.255963e+061 result=40 12:18:00 Get A/D value=-858993460 result=40 12:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:00 Aux= 12:18:00 Message to Camera, serial 51046 queued 12:18:09 Received message from Master: op=Shutter serial=51056 12:18:09 Shutter LASER close 12:18:09 Received message from Master: op=PointingHead serial=51060 12:18:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:18:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:18:09 Point started: ret=0 12:18:09 point_skyscan result=0 12:18:10 Check angles 12:18:10 SkyScan query 12:18:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 12:18:11 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 12:18:11 Check angles 12:18:11 SkyScan query 12:18:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.295<-20153 Statuses=0008 0009 12:18:11 Msec=750 True Az=112.995 Ze=-122.295 Az status=0008 Ze status=0009 12:18:12 Check angles 12:18:12 SkyScan query 12:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.325<-18755 Statuses=0008 0009 12:18:12 Msec=1500 True Az=112.995 Ze=-101.325 Az status=0008 Ze status=0009 12:18:12 Check angles 12:18:12 SkyScan query 12:18:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 12:18:13 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 12:18:13 Check angles 12:18:13 SkyScan query 12:18:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 12:18:14 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 12:18:14 Check angles 12:18:14 SkyScan query 12:18:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.025<-14535 Statuses=0008 0009 12:18:14 Msec=3750 True Az=112.995 Ze=-38.025 Az status=0008 Ze status=0009 12:18:15 Check angles 12:18:15 SkyScan query 12:18:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 12:18:15 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 12:18:15 Check angles 12:18:15 SkyScan query 12:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 12:18:16 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 12:18:16 Check angles 12:18:16 SkyScan query 12:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:18:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:18:17 Message to Master queued w/err=0: serial=51060 error=0 12:18:22 Received message from Master: op=Filter serial=51061 12:18:22 Color wheel filter change from 0 to 0 12:18:22 FLIGetFilterPos err=0 currentPosition=0 12:18:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:22 Filter is already there-color wheel unchanged 12:18:22 Received message from Master: op=Shutter serial=51062 12:18:22 Shutter LASER close 12:18:22 Received message from Camera: op=State serial=51064 12:18:22 GetSingleValue result=40 Value=cccccccc 12:18:22 SkyScan query 12:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:18:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:23 Parameters OK 12:18:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:23 Set A/D data flow result=40 12:18:23 Set A/D channel type result=40 12:18:23 Set A/D encoding result=40 12:18:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:23 Set channel filter=0.000000e+000 result=40 12:18:23 Config A/D Result=40 12:18:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:23 Get A/D filter: -9.255963e+061 result=40 12:18:23 Get A/D value=-858993460 result=40 12:18:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:23 Parameters OK 12:18:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:23 Set A/D data flow result=40 12:18:23 Set A/D channel type result=40 12:18:23 Set A/D encoding result=40 12:18:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:23 Set channel filter=0.000000e+000 result=40 12:18:23 Config A/D Result=40 12:18:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:23 Get A/D filter: -9.255963e+061 result=40 12:18:23 Get A/D value=-858993460 result=40 12:18:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:23 Aux= 12:18:23 Message to Camera, serial 51064 queued 12:19:00 Received message from Master: op=PointingHead serial=51077 12:19:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:19:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:19:00 Point started: ret=0 12:19:00 point_skyscan result=0 12:19:01 Check angles 12:19:01 SkyScan query 12:19:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:19:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:19:01 Message to Master queued w/err=0: serial=51077 error=0 12:19:06 Received message from Master: op=Filter serial=51078 12:19:06 Color wheel filter change from 0 to 0 12:19:06 FLIGetFilterPos err=0 currentPosition=0 12:19:06 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:06 Filter is already there-color wheel unchanged 12:19:06 Received message from Master: op=Shutter serial=51079 12:19:06 Shutter LASER close 12:19:06 Received message from Camera: op=State serial=51081 12:19:06 GetSingleValue result=40 Value=cccccccc 12:19:06 SkyScan query 12:19:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:19:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:07 Parameters OK 12:19:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:07 Set A/D data flow result=40 12:19:07 Set A/D channel type result=40 12:19:07 Set A/D encoding result=40 12:19:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:07 Set channel filter=0.000000e+000 result=40 12:19:07 Config A/D Result=40 12:19:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:07 Get A/D filter: -9.255963e+061 result=40 12:19:07 Get A/D value=-858993460 result=40 12:19:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:07 Parameters OK 12:19:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:07 Set A/D data flow result=40 12:19:07 Set A/D channel type result=40 12:19:07 Set A/D encoding result=40 12:19:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:07 Set channel filter=0.000000e+000 result=40 12:19:07 Config A/D Result=40 12:19:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:07 Get A/D filter: -9.255963e+061 result=40 12:19:07 Get A/D value=-858993460 result=40 12:19:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:07 Aux= 12:19:07 Message to Camera, serial 51081 queued 12:19:44 Received message from Master: op=PointingHead serial=51094 12:19:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:19:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:19:44 Point started: ret=0 12:19:44 point_skyscan result=0 12:19:45 Check angles 12:19:45 SkyScan query 12:19:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:19:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:19:45 Message to Master queued w/err=0: serial=51094 error=0 12:19:50 Received message from Master: op=Filter serial=51095 12:19:50 Color wheel filter change from 0 to 0 12:19:50 FLIGetFilterPos err=0 currentPosition=0 12:19:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:50 Filter is already there-color wheel unchanged 12:19:51 Received message from Master: op=Shutter serial=51096 12:19:51 Shutter LASER close 12:19:51 Received message from Camera: op=State serial=51098 12:19:51 GetSingleValue result=40 Value=cccccccc 12:19:51 SkyScan query 12:19:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:19:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:51 Parameters OK 12:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:51 Set A/D data flow result=40 12:19:51 Set A/D channel type result=40 12:19:51 Set A/D encoding result=40 12:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:51 Set channel filter=0.000000e+000 result=40 12:19:51 Config A/D Result=40 12:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:51 Get A/D filter: -9.255963e+061 result=40 12:19:51 Get A/D value=-858993460 result=40 12:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:51 Parameters OK 12:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:51 Set A/D data flow result=40 12:19:51 Set A/D channel type result=40 12:19:51 Set A/D encoding result=40 12:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:51 Set channel filter=0.000000e+000 result=40 12:19:51 Config A/D Result=40 12:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:51 Get A/D filter: -9.255963e+061 result=40 12:19:51 Get A/D value=-858993460 result=40 12:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:51 Aux= 12:19:51 Message to Camera, serial 51098 queued 12:20:28 Received message from Master: op=PointingHead serial=51111 12:20:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:20:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:20:28 Point started: ret=0 12:20:28 point_skyscan result=0 12:20:29 Check angles 12:20:29 SkyScan query 12:20:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:20:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:20:30 Message to Master queued w/err=0: serial=51111 error=0 12:20:35 Received message from Master: op=Filter serial=51112 12:20:35 Color wheel filter change from 0 to 0 12:20:35 FLIGetFilterPos err=0 currentPosition=0 12:20:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:35 Filter is already there-color wheel unchanged 12:20:35 Received message from Master: op=Shutter serial=51113 12:20:35 Shutter LASER close 12:20:35 Received message from Camera: op=State serial=51115 12:20:35 GetSingleValue result=40 Value=cccccccc 12:20:35 SkyScan query 12:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:20:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:36 Parameters OK 12:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:36 Set A/D data flow result=40 12:20:36 Set A/D channel type result=40 12:20:36 Set A/D encoding result=40 12:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:36 Set channel filter=0.000000e+000 result=40 12:20:36 Config A/D Result=40 12:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:36 Get A/D filter: -9.255963e+061 result=40 12:20:36 Get A/D value=-858993460 result=40 12:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:36 Parameters OK 12:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:36 Set A/D data flow result=40 12:20:36 Set A/D channel type result=40 12:20:36 Set A/D encoding result=40 12:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:36 Set channel filter=0.000000e+000 result=40 12:20:36 Config A/D Result=40 12:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:36 Get A/D filter: -9.255963e+061 result=40 12:20:36 Get A/D value=-858993460 result=40 12:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:36 Aux= 12:20:36 Message to Camera, serial 51115 queued 12:21:12 Received message from Master: op=PointingHead serial=51128 12:21:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:21:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:21:13 Point started: ret=0 12:21:13 point_skyscan result=0 12:21:14 Check angles 12:21:14 SkyScan query 12:21:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.85<-13590 Statuses=0008 0009 12:21:14 Msec=0 True Az=112.995 Ze=-23.85 Az status=0008 Ze status=0009 12:21:14 Check angles 12:21:14 SkyScan query 12:21:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.225<-15015 Statuses=0008 0009 12:21:15 Msec=750 True Az=112.995 Ze=-45.225 Az status=0008 Ze status=0009 12:21:15 Check angles 12:21:15 SkyScan query 12:21:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.18<-16412 Statuses=0008 0009 12:21:16 Msec=1500 True Az=112.995 Ze=-66.18 Az status=0008 Ze status=0009 12:21:16 Check angles 12:21:16 SkyScan query 12:21:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.135<-17809 Statuses=0008 0009 12:21:16 Msec=2250 True Az=112.995 Ze=-87.135 Az status=0008 Ze status=0009 12:21:17 Check angles 12:21:17 SkyScan query 12:21:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.075<-19205 Statuses=0008 0009 12:21:17 Msec=3000 True Az=112.995 Ze=-108.075 Az status=0008 Ze status=0009 12:21:17 Check angles 12:21:17 SkyScan query 12:21:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 12:21:18 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 12:21:18 Check angles 12:21:18 SkyScan query 12:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.42<-22028 Statuses=0008 0009 12:21:19 Msec=4500 True Az=112.995 Ze=-150.42 Az status=0008 Ze status=0009 12:21:19 Check angles 12:21:19 SkyScan query 12:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 12:21:19 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 12:21:20 Check angles 12:21:20 SkyScan query 12:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:21:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:21:20 Message to Master queued w/err=0: serial=51128 error=0 12:21:25 Received message from Master: op=Filter serial=51129 12:21:25 Color wheel filter change from 0 to 0 12:21:25 FLIGetFilterPos err=0 currentPosition=0 12:21:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:25 Filter is already there-color wheel unchanged 12:21:25 Received message from Master: op=Shutter serial=51130 12:21:25 Shutter LASER open 12:21:25 Received message from Camera: op=State serial=51132 12:21:25 GetSingleValue result=40 Value=cccccccc 12:21:25 SkyScan query 12:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:21:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:26 Parameters OK 12:21:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:26 Set A/D data flow result=40 12:21:26 Set A/D channel type result=40 12:21:26 Set A/D encoding result=40 12:21:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:26 Set channel filter=0.000000e+000 result=40 12:21:26 Config A/D Result=40 12:21:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:26 Get A/D filter: -9.255963e+061 result=40 12:21:26 Get A/D value=-858993460 result=40 12:21:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:26 Parameters OK 12:21:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:26 Set A/D data flow result=40 12:21:26 Set A/D channel type result=40 12:21:26 Set A/D encoding result=40 12:21:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:26 Set channel filter=0.000000e+000 result=40 12:21:26 Config A/D Result=40 12:21:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:26 Get A/D filter: -9.255963e+061 result=40 12:21:26 Get A/D value=-858993460 result=40 12:21:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:26 Aux= 12:21:26 Message to Camera, serial 51132 queued 12:21:34 Received message from Master: op=Shutter serial=51142 12:21:34 Shutter LASER close 12:21:35 Received message from Master: op=PointingHead serial=51146 12:21:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:21:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:21:35 Point started: ret=0 12:21:35 point_skyscan result=0 12:21:36 Check angles 12:21:36 SkyScan query 12:21:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 12:21:37 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 12:21:37 Check angles 12:21:37 SkyScan query 12:21:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 12:21:37 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 12:21:38 Check angles 12:21:38 SkyScan query 12:21:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.31<-18754 Statuses=0008 0009 12:21:38 Msec=1500 True Az=112.995 Ze=-101.31 Az status=0008 Ze status=0009 12:21:38 Check angles 12:21:38 SkyScan query 12:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.355<-17357 Statuses=0008 0009 12:21:39 Msec=2250 True Az=112.995 Ze=-80.355 Az status=0008 Ze status=0009 12:21:39 Check angles 12:21:39 SkyScan query 12:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.415<-15961 Statuses=0008 0009 12:21:40 Msec=3000 True Az=112.995 Ze=-59.415 Az status=0008 Ze status=0009 12:21:40 Check angles 12:21:40 SkyScan query 12:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.995<-14533 Statuses=0008 0009 12:21:40 Msec=3750 True Az=112.995 Ze=-37.995 Az status=0008 Ze status=0009 12:21:41 Check angles 12:21:41 SkyScan query 12:21:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.055<-13137 Statuses=0008 0009 12:21:41 Msec=4500 True Az=112.995 Ze=-17.055 Az status=0008 Ze status=0009 12:21:41 Check angles 12:21:41 SkyScan query 12:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=3.9<-11740 Statuses=0008 0009 12:21:42 Msec=5250 True Az=112.995 Ze=3.9 Az status=0008 Ze status=0009 12:21:42 Check angles 12:21:42 SkyScan query 12:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:21:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:21:43 Message to Master queued w/err=0: serial=51146 error=0 12:21:48 Received message from Master: op=Filter serial=51147 12:21:48 Color wheel filter change from 0 to 0 12:21:48 FLIGetFilterPos err=0 currentPosition=0 12:21:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:48 Filter is already there-color wheel unchanged 12:21:48 Received message from Master: op=Shutter serial=51148 12:21:48 Shutter LASER close 12:21:48 Received message from Camera: op=State serial=51150 12:21:48 GetSingleValue result=40 Value=cccccccc 12:21:48 SkyScan query 12:21:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:21:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:49 Parameters OK 12:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:49 Set A/D data flow result=40 12:21:49 Set A/D channel type result=40 12:21:49 Set A/D encoding result=40 12:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:49 Set channel filter=0.000000e+000 result=40 12:21:49 Config A/D Result=40 12:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:49 Get A/D filter: -9.255963e+061 result=40 12:21:49 Get A/D value=-858993460 result=40 12:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:49 Parameters OK 12:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:49 Set A/D data flow result=40 12:21:49 Set A/D channel type result=40 12:21:49 Set A/D encoding result=40 12:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:49 Set channel filter=0.000000e+000 result=40 12:21:49 Config A/D Result=40 12:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:49 Get A/D filter: -9.255963e+061 result=40 12:21:49 Get A/D value=-858993460 result=40 12:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:49 Aux= 12:21:49 Message to Camera, serial 51150 queued 12:22:26 Received message from Master: op=PointingHead serial=51163 12:22:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:22:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:22:26 Point started: ret=0 12:22:26 point_skyscan result=0 12:22:27 Check angles 12:22:27 SkyScan query 12:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:22:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:22:27 Message to Master queued w/err=0: serial=51163 error=0 12:22:32 Received message from Master: op=Filter serial=51164 12:22:32 Color wheel filter change from 0 to 0 12:22:32 FLIGetFilterPos err=0 currentPosition=0 12:22:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:32 Filter is already there-color wheel unchanged 12:22:32 Received message from Master: op=Shutter serial=51165 12:22:32 Shutter LASER close 12:22:32 Received message from Camera: op=State serial=51167 12:22:32 GetSingleValue result=40 Value=cccccccc 12:22:32 SkyScan query 12:22:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:22:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:33 Parameters OK 12:22:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:33 Set A/D data flow result=40 12:22:33 Set A/D channel type result=40 12:22:33 Set A/D encoding result=40 12:22:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:33 Set channel filter=0.000000e+000 result=40 12:22:33 Config A/D Result=40 12:22:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:33 Get A/D filter: -9.255963e+061 result=40 12:22:33 Get A/D value=-858993460 result=40 12:22:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:33 Parameters OK 12:22:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:33 Set A/D data flow result=40 12:22:33 Set A/D channel type result=40 12:22:33 Set A/D encoding result=40 12:22:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:33 Set channel filter=0.000000e+000 result=40 12:22:33 Config A/D Result=40 12:22:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:33 Get A/D filter: -9.255963e+061 result=40 12:22:33 Get A/D value=-858993460 result=40 12:22:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:33 Aux= 12:22:33 Message to Camera, serial 51167 queued 12:23:09 Received message from Master: op=PointingHead serial=51179 12:23:09 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:23:09 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:23:09 Point started: ret=0 12:23:09 point_skyscan result=0 12:23:10 Check angles 12:23:10 SkyScan query 12:23:11 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 12:23:11 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 12:23:11 Check angles 12:23:11 SkyScan query 12:23:11 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 12:23:11 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 12:23:11 Check angles 12:23:11 SkyScan query 12:23:12 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 12:23:12 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 12:23:12 Check angles 12:23:12 SkyScan query 12:23:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:23:13 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:23:13 Message to Master queued w/err=0: serial=51179 error=0 12:23:18 Received message from Master: op=Filter serial=51180 12:23:18 Color wheel filter change from 0 to 0 12:23:18 FLIGetFilterPos err=0 currentPosition=0 12:23:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:18 Filter is already there-color wheel unchanged 12:23:18 Received message from Master: op=Shutter serial=51181 12:23:18 Shutter LASER close 12:23:18 Received message from Camera: op=State serial=51183 12:23:18 GetSingleValue result=40 Value=cccccccc 12:23:18 SkyScan query 12:23:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:23:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:19 Parameters OK 12:23:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:19 Set A/D data flow result=40 12:23:19 Set A/D channel type result=40 12:23:19 Set A/D encoding result=40 12:23:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:19 Set channel filter=0.000000e+000 result=40 12:23:19 Config A/D Result=40 12:23:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:19 Get A/D filter: -9.255963e+061 result=40 12:23:19 Get A/D value=-858993460 result=40 12:23:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:19 Parameters OK 12:23:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:19 Set A/D data flow result=40 12:23:19 Set A/D channel type result=40 12:23:19 Set A/D encoding result=40 12:23:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:19 Set channel filter=0.000000e+000 result=40 12:23:19 Config A/D Result=40 12:23:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:19 Get A/D filter: -9.255963e+061 result=40 12:23:19 Get A/D value=-858993460 result=40 12:23:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:19 Aux= 12:23:19 Message to Camera, serial 51183 queued [UTC 2019-3-1 12:23:50] 12:23:55 Received message from Master: op=PointingHead serial=51196 12:23:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:23:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:23:56 Point started: ret=0 12:23:56 point_skyscan result=0 12:23:57 Check angles 12:23:57 SkyScan query 12:23:57 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 12:23:57 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 12:23:57 Check angles 12:23:57 SkyScan query 12:23:58 SkyScan query done: ret=0 az=134.76<-8984 ze=6.495<-11567 Statuses=0009 0008 12:23:58 Msec=750 True Az=134.76 Ze=6.495 Az status=0009 Ze status=0008 12:23:58 Check angles 12:23:58 SkyScan query 12:23:59 SkyScan query done: ret=0 az=117.315<-7821 ze=6.495<-11567 Statuses=0009 0008 12:23:59 Msec=1500 True Az=117.315 Ze=6.495 Az status=0009 Ze status=0008 12:23:59 Check angles 12:23:59 SkyScan query 12:23:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:23:59 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:23:59 Message to Master queued w/err=0: serial=51196 error=0 12:24:04 Received message from Master: op=Filter serial=51197 12:24:04 Color wheel filter change from 0 to 0 12:24:04 FLIGetFilterPos err=0 currentPosition=0 12:24:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:04 Filter is already there-color wheel unchanged 12:24:05 Received message from Master: op=Shutter serial=51198 12:24:05 Shutter LASER close 12:24:05 Received message from Camera: op=State serial=51200 12:24:05 GetSingleValue result=40 Value=cccccccc 12:24:05 SkyScan query 12:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:24:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:05 Parameters OK 12:24:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:05 Set A/D data flow result=40 12:24:05 Set A/D channel type result=40 12:24:05 Set A/D encoding result=40 12:24:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:05 Set channel filter=0.000000e+000 result=40 12:24:05 Config A/D Result=40 12:24:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:05 Get A/D filter: -9.255963e+061 result=40 12:24:05 Get A/D value=-858993460 result=40 12:24:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:05 Parameters OK 12:24:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:05 Set A/D data flow result=40 12:24:05 Set A/D channel type result=40 12:24:05 Set A/D encoding result=40 12:24:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:05 Set channel filter=0.000000e+000 result=40 12:24:05 Config A/D Result=40 12:24:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:05 Get A/D filter: -9.255963e+061 result=40 12:24:05 Get A/D value=-858993460 result=40 12:24:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:05 Aux= 12:24:05 Message to Camera, serial 51200 queued 12:24:41 Received message from Master: op=PointingHead serial=51212 12:24:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:24:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:24:41 Point started: ret=0 12:24:41 point_skyscan result=0 12:24:42 Check angles 12:24:42 SkyScan query 12:24:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 12:24:43 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 12:24:43 Check angles 12:24:43 SkyScan query 12:24:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 12:24:44 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 12:24:44 Check angles 12:24:44 SkyScan query 12:24:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 12:24:44 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 12:24:44 Check angles 12:24:44 SkyScan query 12:24:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 12:24:45 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 12:24:45 Check angles 12:24:45 SkyScan query 12:24:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 12:24:46 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 12:24:46 Check angles 12:24:46 SkyScan query 12:24:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.805<-20587 Statuses=0008 0009 12:24:47 Msec=3750 True Az=112.995 Ze=-128.805 Az status=0008 Ze status=0009 12:24:47 Check angles 12:24:47 SkyScan query 12:24:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.21<-22014 Statuses=0008 0009 12:24:47 Msec=4500 True Az=112.995 Ze=-150.21 Az status=0008 Ze status=0009 12:24:47 Check angles 12:24:47 SkyScan query 12:24:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.03<-23402 Statuses=0008 0009 12:24:48 Msec=5250 True Az=112.995 Ze=-171.03 Az status=0008 Ze status=0009 12:24:48 Check angles 12:24:48 SkyScan query 12:24:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:24:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:24:49 Message to Master queued w/err=0: serial=51212 error=0 12:24:54 Received message from Master: op=Filter serial=51213 12:24:54 Color wheel filter change from 0 to 0 12:24:54 FLIGetFilterPos err=0 currentPosition=0 12:24:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:54 Filter is already there-color wheel unchanged 12:24:54 Received message from Master: op=Shutter serial=51214 12:24:54 Shutter LASER open 12:24:54 Received message from Camera: op=State serial=51216 12:24:54 GetSingleValue result=40 Value=cccccccc 12:24:54 SkyScan query 12:24:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:24:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:55 Parameters OK 12:24:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:55 Set A/D data flow result=40 12:24:55 Set A/D channel type result=40 12:24:55 Set A/D encoding result=40 12:24:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:55 Set channel filter=0.000000e+000 result=40 12:24:55 Config A/D Result=40 12:24:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:55 Get A/D filter: -9.255963e+061 result=40 12:24:55 Get A/D value=-858993460 result=40 12:24:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:55 Parameters OK 12:24:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:55 Set A/D data flow result=40 12:24:55 Set A/D channel type result=40 12:24:55 Set A/D encoding result=40 12:24:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:55 Set channel filter=0.000000e+000 result=40 12:24:55 Config A/D Result=40 12:24:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:55 Get A/D filter: -9.255963e+061 result=40 12:24:55 Get A/D value=-858993460 result=40 12:24:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:55 Aux= 12:24:55 Message to Camera, serial 51216 queued 12:25:03 Received message from Master: op=Shutter serial=51226 12:25:03 Shutter LASER close 12:25:04 Received message from Master: op=PointingHead serial=51230 12:25:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:25:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:25:04 Point started: ret=0 12:25:04 point_skyscan result=0 12:25:05 Check angles 12:25:05 SkyScan query 12:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 12:25:05 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 12:25:05 Check angles 12:25:05 SkyScan query 12:25:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 12:25:06 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 12:25:06 Check angles 12:25:06 SkyScan query 12:25:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.55<-18770 Statuses=0008 0009 12:25:07 Msec=1500 True Az=112.995 Ze=-101.55 Az status=0008 Ze status=0009 12:25:07 Check angles 12:25:07 SkyScan query 12:25:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 12:25:07 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 12:25:08 Check angles 12:25:08 SkyScan query 12:25:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.625<-15975 Statuses=0008 0009 12:25:08 Msec=3000 True Az=112.995 Ze=-59.625 Az status=0008 Ze status=0009 12:25:08 Check angles 12:25:08 SkyScan query 12:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.67<-14578 Statuses=0008 0009 12:25:09 Msec=3750 True Az=112.995 Ze=-38.67 Az status=0008 Ze status=0009 12:25:09 Check angles 12:25:09 SkyScan query 12:25:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.715<-13181 Statuses=0008 0009 12:25:10 Msec=4500 True Az=112.995 Ze=-17.715 Az status=0008 Ze status=0009 12:25:10 Check angles 12:25:10 SkyScan query 12:25:10 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 12:25:10 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 12:25:11 Check angles 12:25:11 SkyScan query 12:25:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:25:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:25:11 Message to Master queued w/err=0: serial=51230 error=0 12:25:16 Received message from Master: op=Filter serial=51231 12:25:16 Color wheel filter change from 0 to 0 12:25:16 FLIGetFilterPos err=0 currentPosition=0 12:25:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:16 Filter is already there-color wheel unchanged 12:25:16 Received message from Master: op=Shutter serial=51232 12:25:16 Shutter LASER close 12:25:17 Received message from Camera: op=State serial=51234 12:25:17 GetSingleValue result=40 Value=cccccccc 12:25:17 SkyScan query 12:25:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:25:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:17 Parameters OK 12:25:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:17 Set A/D data flow result=40 12:25:17 Set A/D channel type result=40 12:25:17 Set A/D encoding result=40 12:25:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:17 Set channel filter=0.000000e+000 result=40 12:25:17 Config A/D Result=40 12:25:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:17 Get A/D filter: -9.255963e+061 result=40 12:25:17 Get A/D value=-858993460 result=40 12:25:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:17 Parameters OK 12:25:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:17 Set A/D data flow result=40 12:25:17 Set A/D channel type result=40 12:25:17 Set A/D encoding result=40 12:25:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:17 Set channel filter=0.000000e+000 result=40 12:25:17 Config A/D Result=40 12:25:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:17 Get A/D filter: -9.255963e+061 result=40 12:25:17 Get A/D value=-858993460 result=40 12:25:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:17 Aux= 12:25:17 Message to Camera, serial 51234 queued 12:25:54 Received message from Master: op=PointingHead serial=51247 12:25:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:25:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:25:54 Point started: ret=0 12:25:54 point_skyscan result=0 12:25:55 Check angles 12:25:55 SkyScan query 12:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:25:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:25:56 Message to Master queued w/err=0: serial=51247 error=0 12:26:01 Received message from Master: op=Filter serial=51248 12:26:01 Color wheel filter change from 0 to 0 12:26:01 FLIGetFilterPos err=0 currentPosition=0 12:26:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:01 Filter is already there-color wheel unchanged 12:26:01 Received message from Master: op=Shutter serial=51249 12:26:01 Shutter LASER close 12:26:01 Received message from Camera: op=State serial=51251 12:26:01 GetSingleValue result=40 Value=cccccccc 12:26:01 SkyScan query 12:26:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:26:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:01 Parameters OK 12:26:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:01 Set A/D data flow result=40 12:26:01 Set A/D channel type result=40 12:26:01 Set A/D encoding result=40 12:26:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:01 Set channel filter=0.000000e+000 result=40 12:26:01 Config A/D Result=40 12:26:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:01 Get A/D filter: -9.255963e+061 result=40 12:26:01 Get A/D value=-858993460 result=40 12:26:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:01 Parameters OK 12:26:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:01 Set A/D data flow result=40 12:26:01 Set A/D channel type result=40 12:26:01 Set A/D encoding result=40 12:26:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:01 Set channel filter=0.000000e+000 result=40 12:26:01 Config A/D Result=40 12:26:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:01 Get A/D filter: -9.255963e+061 result=40 12:26:01 Get A/D value=-858993460 result=40 12:26:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:01 Aux= 12:26:01 Message to Camera, serial 51251 queued 12:26:38 Received message from Master: op=PointingHead serial=51264 12:26:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:26:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:26:39 Point started: ret=0 12:26:39 point_skyscan result=0 12:26:39 Check angles 12:26:39 SkyScan query 12:26:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:26:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:26:40 Message to Master queued w/err=0: serial=51264 error=0 12:26:45 Received message from Master: op=Filter serial=51265 12:26:45 Color wheel filter change from 0 to 0 12:26:45 FLIGetFilterPos err=0 currentPosition=0 12:26:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:45 Filter is already there-color wheel unchanged 12:26:45 Received message from Master: op=Shutter serial=51266 12:26:45 Shutter LASER close 12:26:45 Received message from Camera: op=State serial=51268 12:26:45 GetSingleValue result=40 Value=cccccccc 12:26:45 SkyScan query 12:26:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:26:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:46 Parameters OK 12:26:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:46 Set A/D data flow result=40 12:26:46 Set A/D channel type result=40 12:26:46 Set A/D encoding result=40 12:26:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:46 Set channel filter=0.000000e+000 result=40 12:26:46 Config A/D Result=40 12:26:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:46 Get A/D filter: -9.255963e+061 result=40 12:26:46 Get A/D value=-858993460 result=40 12:26:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:46 Parameters OK 12:26:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:46 Set A/D data flow result=40 12:26:46 Set A/D channel type result=40 12:26:46 Set A/D encoding result=40 12:26:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:46 Set channel filter=0.000000e+000 result=40 12:26:46 Config A/D Result=40 12:26:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:46 Get A/D filter: -9.255963e+061 result=40 12:26:46 Get A/D value=-858993460 result=40 12:26:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:46 Aux= 12:26:46 Message to Camera, serial 51268 queued 12:27:23 Received message from Master: op=PointingHead serial=51281 12:27:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:27:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:27:23 Point started: ret=0 12:27:23 point_skyscan result=0 12:27:24 Check angles 12:27:24 SkyScan query 12:27:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:27:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:27:24 Message to Master queued w/err=0: serial=51281 error=0 12:27:29 Received message from Master: op=Filter serial=51282 12:27:29 Color wheel filter change from 0 to 0 12:27:29 FLIGetFilterPos err=0 currentPosition=0 12:27:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:29 Filter is already there-color wheel unchanged 12:27:29 Received message from Master: op=Shutter serial=51283 12:27:29 Shutter LASER close 12:27:29 Received message from Camera: op=State serial=51285 12:27:29 GetSingleValue result=40 Value=cccccccc 12:27:29 SkyScan query 12:27:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:27:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:30 Parameters OK 12:27:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:30 Set A/D data flow result=40 12:27:30 Set A/D channel type result=40 12:27:30 Set A/D encoding result=40 12:27:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:30 Set channel filter=0.000000e+000 result=40 12:27:30 Config A/D Result=40 12:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:30 Get A/D filter: -9.255963e+061 result=40 12:27:30 Get A/D value=-858993460 result=40 12:27:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:30 Parameters OK 12:27:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:30 Set A/D data flow result=40 12:27:30 Set A/D channel type result=40 12:27:30 Set A/D encoding result=40 12:27:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:30 Set channel filter=0.000000e+000 result=40 12:27:30 Config A/D Result=40 12:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:30 Get A/D filter: -9.255963e+061 result=40 12:27:30 Get A/D value=-858993460 result=40 12:27:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:30 Aux= 12:27:30 Message to Camera, serial 51285 queued 12:28:06 Received message from Master: op=PointingHead serial=51297 12:28:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:28:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:28:06 Point started: ret=0 12:28:06 point_skyscan result=0 12:28:07 Check angles 12:28:07 SkyScan query 12:28:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.685<-13579 Statuses=0008 0009 12:28:08 Msec=0 True Az=112.995 Ze=-23.685 Az status=0008 Ze status=0009 12:28:08 Check angles 12:28:08 SkyScan query 12:28:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 12:28:08 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 12:28:09 Check angles 12:28:09 SkyScan query 12:28:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 12:28:09 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 12:28:09 Check angles 12:28:09 SkyScan query 12:28:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 12:28:10 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 12:28:10 Check angles 12:28:10 SkyScan query 12:28:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.49<-19166 Statuses=0008 0009 12:28:11 Msec=3000 True Az=112.995 Ze=-107.49 Az status=0008 Ze status=0009 12:28:11 Check angles 12:28:11 SkyScan query 12:28:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 12:28:11 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 12:28:12 Check angles 12:28:12 SkyScan query 12:28:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.415<-21961 Statuses=0008 0009 12:28:12 Msec=4500 True Az=112.995 Ze=-149.415 Az status=0008 Ze status=0009 12:28:12 Check angles 12:28:12 SkyScan query 12:28:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 12:28:13 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 12:28:13 Check angles 12:28:13 SkyScan query 12:28:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:28:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:28:14 Message to Master queued w/err=0: serial=51297 error=0 12:28:19 Received message from Master: op=Filter serial=51298 12:28:19 Color wheel filter change from 0 to 0 12:28:19 FLIGetFilterPos err=0 currentPosition=0 12:28:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:19 Filter is already there-color wheel unchanged 12:28:19 Received message from Master: op=Shutter serial=51299 12:28:19 Shutter LASER open 12:28:19 Received message from Camera: op=State serial=51301 12:28:19 GetSingleValue result=40 Value=cccccccc 12:28:19 SkyScan query 12:28:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:28:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:20 Parameters OK 12:28:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:20 Set A/D data flow result=40 12:28:20 Set A/D channel type result=40 12:28:20 Set A/D encoding result=40 12:28:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:20 Set channel filter=0.000000e+000 result=40 12:28:20 Config A/D Result=40 12:28:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:20 Get A/D filter: -9.255963e+061 result=40 12:28:20 Get A/D value=-858993460 result=40 12:28:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:20 Parameters OK 12:28:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:20 Set A/D data flow result=40 12:28:20 Set A/D channel type result=40 12:28:20 Set A/D encoding result=40 12:28:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:20 Set channel filter=0.000000e+000 result=40 12:28:20 Config A/D Result=40 12:28:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:20 Get A/D filter: -9.255963e+061 result=40 12:28:20 Get A/D value=-858993460 result=40 12:28:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:20 Aux= 12:28:20 Message to Camera, serial 51301 queued 12:28:28 Received message from Master: op=Shutter serial=51311 12:28:28 Shutter LASER close 12:28:29 Received message from Master: op=PointingHead serial=51315 12:28:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:28:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:28:29 Point started: ret=0 12:28:29 point_skyscan result=0 12:28:30 Check angles 12:28:30 SkyScan query 12:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 12:28:30 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 12:28:30 Check angles 12:28:30 SkyScan query 12:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 12:28:31 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 12:28:31 Check angles 12:28:31 SkyScan query 12:28:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.505<-18767 Statuses=0008 0009 12:28:32 Msec=1500 True Az=112.995 Ze=-101.505 Az status=0008 Ze status=0009 12:28:32 Check angles 12:28:32 SkyScan query 12:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.55<-17370 Statuses=0008 0009 12:28:33 Msec=2250 True Az=112.995 Ze=-80.55 Az status=0008 Ze status=0009 12:28:33 Check angles 12:28:33 SkyScan query 12:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.61<-15974 Statuses=0008 0009 12:28:33 Msec=3000 True Az=112.995 Ze=-59.61 Az status=0008 Ze status=0009 12:28:33 Check angles 12:28:33 SkyScan query 12:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.64<-14576 Statuses=0008 0009 12:28:34 Msec=3750 True Az=112.995 Ze=-38.64 Az status=0008 Ze status=0009 12:28:34 Check angles 12:28:34 SkyScan query 12:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.7<-13180 Statuses=0008 0009 12:28:35 Msec=4500 True Az=112.995 Ze=-17.7 Az status=0008 Ze status=0009 12:28:35 Check angles 12:28:35 SkyScan query 12:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=3.27<-11782 Statuses=0008 0009 12:28:36 Msec=5250 True Az=112.995 Ze=3.27 Az status=0008 Ze status=0009 12:28:36 Check angles 12:28:36 SkyScan query 12:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:28:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:28:36 Message to Master queued w/err=0: serial=51315 error=0 12:28:41 Received message from Master: op=Filter serial=51316 12:28:41 Color wheel filter change from 0 to 0 12:28:41 FLIGetFilterPos err=0 currentPosition=0 12:28:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:41 Filter is already there-color wheel unchanged 12:28:41 Received message from Master: op=Shutter serial=51317 12:28:41 Shutter LASER close 12:28:42 Received message from Camera: op=State serial=51319 12:28:42 GetSingleValue result=40 Value=cccccccc 12:28:42 SkyScan query 12:28:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:28:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:42 Parameters OK 12:28:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:42 Set A/D data flow result=40 12:28:42 Set A/D channel type result=40 12:28:42 Set A/D encoding result=40 12:28:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:42 Set channel filter=0.000000e+000 result=40 12:28:42 Config A/D Result=40 12:28:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:42 Get A/D filter: -9.255963e+061 result=40 12:28:42 Get A/D value=-858993460 result=40 12:28:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:42 Parameters OK 12:28:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:42 Set A/D data flow result=40 12:28:42 Set A/D channel type result=40 12:28:42 Set A/D encoding result=40 12:28:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:42 Set channel filter=0.000000e+000 result=40 12:28:42 Config A/D Result=40 12:28:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:42 Get A/D filter: -9.255963e+061 result=40 12:28:42 Get A/D value=-858993460 result=40 12:28:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:42 Aux= 12:28:42 Message to Camera, serial 51319 queued 12:29:19 Received message from Master: op=PointingHead serial=51332 12:29:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:29:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:29:19 Point started: ret=0 12:29:19 point_skyscan result=0 12:29:20 Check angles 12:29:20 SkyScan query 12:29:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:29:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:29:21 Message to Master queued w/err=0: serial=51332 error=0 12:29:26 Received message from Master: op=Filter serial=51333 12:29:26 Color wheel filter change from 0 to 0 12:29:26 FLIGetFilterPos err=0 currentPosition=0 12:29:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:26 Filter is already there-color wheel unchanged 12:29:26 Received message from Master: op=Shutter serial=51334 12:29:26 Shutter LASER close 12:29:26 Received message from Camera: op=State serial=51336 12:29:26 GetSingleValue result=40 Value=cccccccc 12:29:26 SkyScan query 12:29:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:29:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:27 Parameters OK 12:29:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:27 Set A/D data flow result=40 12:29:27 Set A/D channel type result=40 12:29:27 Set A/D encoding result=40 12:29:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:27 Set channel filter=0.000000e+000 result=40 12:29:27 Config A/D Result=40 12:29:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:27 Get A/D filter: -9.255963e+061 result=40 12:29:27 Get A/D value=-858993460 result=40 12:29:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:27 Parameters OK 12:29:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:27 Set A/D data flow result=40 12:29:27 Set A/D channel type result=40 12:29:27 Set A/D encoding result=40 12:29:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:27 Set channel filter=0.000000e+000 result=40 12:29:27 Config A/D Result=40 12:29:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:27 Get A/D filter: -9.255963e+061 result=40 12:29:27 Get A/D value=-858993460 result=40 12:29:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:27 Aux= 12:29:27 Message to Camera, serial 51336 queued 12:30:03 Received message from Master: op=PointingHead serial=51349 12:30:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:30:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:30:04 Point started: ret=0 12:30:04 point_skyscan result=0 12:30:04 Check angles 12:30:04 SkyScan query 12:30:05 SkyScan query done: ret=0 az=135.69<-9046 ze=-6.51<-12434 Statuses=0009 0008 12:30:05 Msec=0 True Az=135.69 Ze=-6.51 Az status=0009 Ze status=0008 12:30:05 Check angles 12:30:05 SkyScan query 12:30:06 SkyScan query done: ret=0 az=153.18<-10212 ze=-6.495<-12433 Statuses=0009 0008 12:30:06 Msec=750 True Az=153.18 Ze=-6.495 Az status=0009 Ze status=0008 12:30:06 Check angles 12:30:06 SkyScan query 12:30:07 SkyScan query done: ret=0 az=170.64<-11376 ze=-6.495<-12433 Statuses=0009 0008 12:30:07 Msec=1500 True Az=170.64 Ze=-6.495 Az status=0009 Ze status=0008 12:30:07 Check angles 12:30:07 SkyScan query 12:30:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:30:07 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:30:07 Message to Master queued w/err=0: serial=51349 error=0 12:30:12 Received message from Master: op=Filter serial=51350 12:30:12 Color wheel filter change from 0 to 0 12:30:12 FLIGetFilterPos err=0 currentPosition=0 12:30:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:12 Filter is already there-color wheel unchanged 12:30:12 Received message from Master: op=Shutter serial=51351 12:30:12 Shutter LASER close 12:30:13 Received message from Camera: op=State serial=51353 12:30:13 GetSingleValue result=40 Value=cccccccc 12:30:13 SkyScan query 12:30:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:30:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:13 Parameters OK 12:30:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:13 Set A/D data flow result=40 12:30:13 Set A/D channel type result=40 12:30:13 Set A/D encoding result=40 12:30:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:13 Set channel filter=0.000000e+000 result=40 12:30:13 Config A/D Result=40 12:30:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:13 Get A/D filter: -9.255963e+061 result=40 12:30:13 Get A/D value=-858993460 result=40 12:30:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:13 Parameters OK 12:30:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:13 Set A/D data flow result=40 12:30:13 Set A/D channel type result=40 12:30:13 Set A/D encoding result=40 12:30:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:13 Set channel filter=0.000000e+000 result=40 12:30:13 Config A/D Result=40 12:30:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:13 Get A/D filter: -9.255963e+061 result=40 12:30:13 Get A/D value=-858993460 result=40 12:30:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:13 Aux= 12:30:13 Message to Camera, serial 51353 queued 12:30:50 Received message from Master: op=PointingHead serial=51366 12:30:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:30:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:30:50 Point started: ret=0 12:30:50 point_skyscan result=0 12:30:51 Check angles 12:30:51 SkyScan query 12:30:52 SkyScan query done: ret=0 az=152.76<-10184 ze=6.51<-11566 Statuses=0009 0008 12:30:52 Msec=0 True Az=152.76 Ze=6.51 Az status=0009 Ze status=0008 12:30:52 Check angles 12:30:52 SkyScan query 12:30:52 SkyScan query done: ret=0 az=135.24<-9016 ze=6.495<-11567 Statuses=0009 0008 12:30:52 Msec=750 True Az=135.24 Ze=6.495 Az status=0009 Ze status=0008 12:30:53 Check angles 12:30:53 SkyScan query 12:30:53 SkyScan query done: ret=0 az=117.75<-7850 ze=6.495<-11567 Statuses=0009 0008 12:30:53 Msec=1500 True Az=117.75 Ze=6.495 Az status=0009 Ze status=0008 12:30:53 Check angles 12:30:53 SkyScan query 12:30:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:30:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:30:54 Message to Master queued w/err=0: serial=51366 error=0 12:30:59 Received message from Master: op=Filter serial=51367 12:30:59 Color wheel filter change from 0 to 0 12:30:59 FLIGetFilterPos err=0 currentPosition=0 12:30:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:59 Filter is already there-color wheel unchanged 12:30:59 Received message from Master: op=Shutter serial=51368 12:30:59 Shutter LASER close 12:30:59 Received message from Camera: op=State serial=51370 12:30:59 GetSingleValue result=40 Value=cccccccc 12:30:59 SkyScan query 12:31:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:00 Parameters OK 12:31:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:00 Set A/D data flow result=40 12:31:00 Set A/D channel type result=40 12:31:00 Set A/D encoding result=40 12:31:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:00 Set channel filter=0.000000e+000 result=40 12:31:00 Config A/D Result=40 12:31:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:00 Get A/D filter: -9.255963e+061 result=40 12:31:00 Get A/D value=-858993460 result=40 12:31:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:00 Parameters OK 12:31:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:00 Set A/D data flow result=40 12:31:00 Set A/D channel type result=40 12:31:00 Set A/D encoding result=40 12:31:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:00 Set channel filter=0.000000e+000 result=40 12:31:00 Config A/D Result=40 12:31:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:00 Get A/D filter: -9.255963e+061 result=40 12:31:00 Get A/D value=-858993460 result=40 12:31:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:00 Aux= 12:31:00 Message to Camera, serial 51370 queued 12:31:36 Received message from Master: op=PointingHead serial=51383 12:31:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:31:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:31:37 Point started: ret=0 12:31:37 point_skyscan result=0 12:31:38 Check angles 12:31:38 SkyScan query 12:31:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 12:31:38 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 12:31:38 Check angles 12:31:38 SkyScan query 12:31:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 12:31:39 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 12:31:39 Check angles 12:31:39 SkyScan query 12:31:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 12:31:40 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 12:31:40 Check angles 12:31:40 SkyScan query 12:31:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.745<-17783 Statuses=0008 0009 12:31:40 Msec=2250 True Az=112.995 Ze=-86.745 Az status=0008 Ze status=0009 12:31:41 Check angles 12:31:41 SkyScan query 12:31:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.7<-19180 Statuses=0008 0009 12:31:41 Msec=3000 True Az=112.995 Ze=-107.7 Az status=0008 Ze status=0009 12:31:41 Check angles 12:31:41 SkyScan query 12:31:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 12:31:42 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 12:31:42 Check angles 12:31:42 SkyScan query 12:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.61<-21974 Statuses=0008 0009 12:31:43 Msec=4500 True Az=112.995 Ze=-149.61 Az status=0008 Ze status=0009 12:31:43 Check angles 12:31:43 SkyScan query 12:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0008 0009 12:31:43 Msec=5250 True Az=112.995 Ze=-170.895 Az status=0008 Ze status=0009 12:31:44 Check angles 12:31:44 SkyScan query 12:31:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:31:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:31:44 Message to Master queued w/err=0: serial=51383 error=0 12:31:49 Received message from Master: op=Filter serial=51384 12:31:49 Color wheel filter change from 0 to 0 12:31:49 FLIGetFilterPos err=0 currentPosition=0 12:31:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:49 Filter is already there-color wheel unchanged 12:31:49 Received message from Master: op=Shutter serial=51385 12:31:49 Shutter LASER open 12:31:50 Received message from Camera: op=State serial=51387 12:31:50 GetSingleValue result=40 Value=cccccccc 12:31:50 SkyScan query 12:31:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:31:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:50 Parameters OK 12:31:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:50 Set A/D data flow result=40 12:31:50 Set A/D channel type result=40 12:31:50 Set A/D encoding result=40 12:31:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:50 Set channel filter=0.000000e+000 result=40 12:31:50 Config A/D Result=40 12:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:50 Get A/D filter: -9.255963e+061 result=40 12:31:50 Get A/D value=-858993460 result=40 12:31:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:50 Parameters OK 12:31:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:50 Set A/D data flow result=40 12:31:50 Set A/D channel type result=40 12:31:50 Set A/D encoding result=40 12:31:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:50 Set channel filter=0.000000e+000 result=40 12:31:50 Config A/D Result=40 12:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:50 Get A/D filter: -9.255963e+061 result=40 12:31:50 Get A/D value=-858993460 result=40 12:31:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:50 Aux= 12:31:50 Message to Camera, serial 51387 queued 12:31:59 Received message from Master: op=Shutter serial=51397 12:31:59 Shutter LASER close 12:31:59 Received message from Master: op=PointingHead serial=51401 12:31:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:31:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:31:59 Point started: ret=0 12:31:59 point_skyscan result=0 12:32:00 Check angles 12:32:00 SkyScan query 12:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 12:32:01 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 12:32:01 Check angles 12:32:01 SkyScan query 12:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 12:32:01 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 12:32:02 Check angles 12:32:02 SkyScan query 12:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 12:32:02 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 12:32:02 Check angles 12:32:02 SkyScan query 12:32:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.68<-17312 Statuses=0008 0009 12:32:03 Msec=2250 True Az=112.995 Ze=-79.68 Az status=0008 Ze status=0009 12:32:03 Check angles 12:32:03 SkyScan query 12:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.74<-15916 Statuses=0008 0009 12:32:04 Msec=3000 True Az=112.995 Ze=-58.74 Az status=0008 Ze status=0009 12:32:04 Check angles 12:32:04 SkyScan query 12:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 12:32:04 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 12:32:05 Check angles 12:32:05 SkyScan query 12:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.815<-13121 Statuses=0008 0009 12:32:05 Msec=4500 True Az=112.995 Ze=-16.815 Az status=0008 Ze status=0009 12:32:05 Check angles 12:32:05 SkyScan query 12:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=4.11<-11726 Statuses=0008 0009 12:32:06 Msec=5250 True Az=112.995 Ze=4.11 Az status=0008 Ze status=0009 12:32:06 Check angles 12:32:06 SkyScan query 12:32:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:32:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:32:07 Message to Master queued w/err=0: serial=51401 error=0 12:32:12 Received message from Master: op=Filter serial=51402 12:32:12 Color wheel filter change from 0 to 0 12:32:12 FLIGetFilterPos err=0 currentPosition=0 12:32:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:12 Filter is already there-color wheel unchanged 12:32:12 Received message from Master: op=Shutter serial=51403 12:32:12 Shutter LASER close 12:32:12 Received message from Camera: op=State serial=51405 12:32:12 GetSingleValue result=40 Value=cccccccc 12:32:12 SkyScan query 12:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:32:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:13 Parameters OK 12:32:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:13 Set A/D data flow result=40 12:32:13 Set A/D channel type result=40 12:32:13 Set A/D encoding result=40 12:32:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:13 Set channel filter=0.000000e+000 result=40 12:32:13 Config A/D Result=40 12:32:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:13 Get A/D filter: -9.255963e+061 result=40 12:32:13 Get A/D value=-858993460 result=40 12:32:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:13 Parameters OK 12:32:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:13 Set A/D data flow result=40 12:32:13 Set A/D channel type result=40 12:32:13 Set A/D encoding result=40 12:32:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:13 Set channel filter=0.000000e+000 result=40 12:32:13 Config A/D Result=40 12:32:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:13 Get A/D filter: -9.255963e+061 result=40 12:32:13 Get A/D value=-858993460 result=40 12:32:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:13 Aux= 12:32:13 Message to Camera, serial 51405 queued 12:32:50 Received message from Master: op=PointingHead serial=51418 12:32:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:32:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:32:50 Point started: ret=0 12:32:50 point_skyscan result=0 12:32:51 Check angles 12:32:51 SkyScan query 12:32:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:32:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:32:51 Message to Master queued w/err=0: serial=51418 error=0 12:32:56 Received message from Master: op=Filter serial=51419 12:32:56 Color wheel filter change from 0 to 0 12:32:56 FLIGetFilterPos err=0 currentPosition=0 12:32:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:56 Filter is already there-color wheel unchanged 12:32:56 Received message from Master: op=Shutter serial=51420 12:32:56 Shutter LASER close 12:32:56 Received message from Camera: op=State serial=51422 12:32:56 GetSingleValue result=40 Value=cccccccc 12:32:56 SkyScan query 12:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:32:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:57 Parameters OK 12:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:57 Set A/D data flow result=40 12:32:57 Set A/D channel type result=40 12:32:57 Set A/D encoding result=40 12:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:57 Set channel filter=0.000000e+000 result=40 12:32:57 Config A/D Result=40 12:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:57 Get A/D filter: -9.255963e+061 result=40 12:32:57 Get A/D value=-858993460 result=40 12:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:57 Parameters OK 12:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:57 Set A/D data flow result=40 12:32:57 Set A/D channel type result=40 12:32:57 Set A/D encoding result=40 12:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:57 Set channel filter=0.000000e+000 result=40 12:32:57 Config A/D Result=40 12:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:57 Get A/D filter: -9.255963e+061 result=40 12:32:57 Get A/D value=-858993460 result=40 12:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:57 Aux= 12:32:57 Message to Camera, serial 51422 queued 12:33:34 Received message from Master: op=PointingHead serial=51435 12:33:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:33:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:33:34 Point started: ret=0 12:33:34 point_skyscan result=0 12:33:35 Check angles 12:33:35 SkyScan query 12:33:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:33:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:33:36 Message to Master queued w/err=0: serial=51435 error=0 12:33:38 Received message from Master: op=Identify serial=51436 12:33:41 Received message from Master: op=Filter serial=51439 12:33:41 Color wheel filter change from 0 to 0 12:33:41 FLIGetFilterPos err=0 currentPosition=0 12:33:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:41 Filter is already there-color wheel unchanged 12:33:41 Received message from Master: op=Shutter serial=51440 12:33:41 Shutter LASER close 12:33:41 Received message from Camera: op=State serial=51442 12:33:41 GetSingleValue result=40 Value=cccccccc 12:33:41 SkyScan query 12:33:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:33:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:41 Parameters OK 12:33:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:41 Set A/D data flow result=40 12:33:41 Set A/D channel type result=40 12:33:41 Set A/D encoding result=40 12:33:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:41 Set channel filter=0.000000e+000 result=40 12:33:41 Config A/D Result=40 12:33:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:41 Get A/D filter: -9.255963e+061 result=40 12:33:41 Get A/D value=-858993460 result=40 12:33:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:41 Parameters OK 12:33:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:41 Set A/D data flow result=40 12:33:41 Set A/D channel type result=40 12:33:41 Set A/D encoding result=40 12:33:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:41 Set channel filter=0.000000e+000 result=40 12:33:41 Config A/D Result=40 12:33:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:41 Get A/D filter: -9.255963e+061 result=40 12:33:41 Get A/D value=-858993460 result=40 12:33:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:41 Aux= [UTC 2019-3-1 12:33:41] 12:33:41 Message to Camera, serial 51442 queued 12:34:18 Received message from Master: op=PointingHead serial=51455 12:34:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:34:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:34:18 Point started: ret=0 12:34:18 point_skyscan result=0 12:34:19 Check angles 12:34:19 SkyScan query 12:34:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:34:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:34:20 Message to Master queued w/err=0: serial=51455 error=0 12:34:25 Received message from Master: op=Filter serial=51456 12:34:25 Color wheel filter change from 0 to 0 12:34:25 FLIGetFilterPos err=0 currentPosition=0 12:34:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:25 Filter is already there-color wheel unchanged 12:34:25 Received message from Master: op=Shutter serial=51457 12:34:25 Shutter LASER close 12:34:25 Received message from Camera: op=State serial=51459 12:34:25 GetSingleValue result=40 Value=cccccccc 12:34:25 SkyScan query 12:34:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:34:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:26 Parameters OK 12:34:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:26 Set A/D data flow result=40 12:34:26 Set A/D channel type result=40 12:34:26 Set A/D encoding result=40 12:34:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:26 Set channel filter=0.000000e+000 result=40 12:34:26 Config A/D Result=40 12:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:26 Get A/D filter: -9.255963e+061 result=40 12:34:26 Get A/D value=-858993460 result=40 12:34:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:26 Parameters OK 12:34:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:26 Set A/D data flow result=40 12:34:26 Set A/D channel type result=40 12:34:26 Set A/D encoding result=40 12:34:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:26 Set channel filter=0.000000e+000 result=40 12:34:26 Config A/D Result=40 12:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:26 Get A/D filter: -9.255963e+061 result=40 12:34:26 Get A/D value=-858993460 result=40 12:34:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:26 Aux= 12:34:26 Message to Camera, serial 51459 queued 12:35:02 Received message from Master: op=PointingHead serial=51472 12:35:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:35:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:35:03 Point started: ret=0 12:35:03 point_skyscan result=0 12:35:04 Check angles 12:35:04 SkyScan query 12:35:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 12:35:04 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 12:35:04 Check angles 12:35:04 SkyScan query 12:35:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.85<-14990 Statuses=0008 0009 12:35:05 Msec=750 True Az=112.995 Ze=-44.85 Az status=0008 Ze status=0009 12:35:05 Check angles 12:35:05 SkyScan query 12:35:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.805<-16387 Statuses=0008 0009 12:35:06 Msec=1500 True Az=112.995 Ze=-65.805 Az status=0008 Ze status=0009 12:35:06 Check angles 12:35:06 SkyScan query 12:35:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.745<-17783 Statuses=0008 0009 12:35:06 Msec=2250 True Az=112.995 Ze=-86.745 Az status=0008 Ze status=0009 12:35:07 Check angles 12:35:07 SkyScan query 12:35:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.135<-19209 Statuses=0008 0009 12:35:07 Msec=3000 True Az=112.995 Ze=-108.135 Az status=0008 Ze status=0009 12:35:07 Check angles 12:35:07 SkyScan query 12:35:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.525<-20635 Statuses=0008 0009 12:35:08 Msec=3750 True Az=112.995 Ze=-129.525 Az status=0008 Ze status=0009 12:35:08 Check angles 12:35:08 SkyScan query 12:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.465<-22031 Statuses=0008 0009 12:35:09 Msec=4500 True Az=112.995 Ze=-150.465 Az status=0008 Ze status=0009 12:35:09 Check angles 12:35:09 SkyScan query 12:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.555<-23437 Statuses=0008 0009 12:35:09 Msec=5250 True Az=112.995 Ze=-171.555 Az status=0008 Ze status=0009 12:35:10 Check angles 12:35:10 SkyScan query 12:35:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:35:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:35:10 Message to Master queued w/err=0: serial=51472 error=0 12:35:15 Received message from Master: op=Filter serial=51473 12:35:15 Color wheel filter change from 0 to 0 12:35:15 FLIGetFilterPos err=0 currentPosition=0 12:35:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:15 Filter is already there-color wheel unchanged 12:35:15 Received message from Master: op=Shutter serial=51474 12:35:15 Shutter LASER open 12:35:16 Received message from Camera: op=State serial=51476 12:35:16 GetSingleValue result=40 Value=cccccccc 12:35:16 SkyScan query 12:35:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:35:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:16 Parameters OK 12:35:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:16 Set A/D data flow result=40 12:35:16 Set A/D channel type result=40 12:35:16 Set A/D encoding result=40 12:35:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:16 Set channel filter=0.000000e+000 result=40 12:35:16 Config A/D Result=40 12:35:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:16 Get A/D filter: -9.255963e+061 result=40 12:35:16 Get A/D value=-858993460 result=40 12:35:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:16 Parameters OK 12:35:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:16 Set A/D data flow result=40 12:35:16 Set A/D channel type result=40 12:35:16 Set A/D encoding result=40 12:35:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:16 Set channel filter=0.000000e+000 result=40 12:35:16 Config A/D Result=40 12:35:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:16 Get A/D filter: -9.255963e+061 result=40 12:35:16 Get A/D value=-858993460 result=40 12:35:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:16 Aux= 12:35:16 Message to Camera, serial 51476 queued 12:35:25 Received message from Master: op=Shutter serial=51486 12:35:25 Shutter LASER close 12:35:25 Received message from Master: op=PointingHead serial=51490 12:35:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:35:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:35:25 Point started: ret=0 12:35:25 point_skyscan result=0 12:35:26 Check angles 12:35:26 SkyScan query 12:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 12:35:27 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 12:35:27 Check angles 12:35:27 SkyScan query 12:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 12:35:28 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 12:35:28 Check angles 12:35:28 SkyScan query 12:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.55<-18770 Statuses=0008 0009 12:35:28 Msec=1500 True Az=112.995 Ze=-101.55 Az status=0008 Ze status=0009 12:35:28 Check angles 12:35:28 SkyScan query 12:35:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.58<-17372 Statuses=0008 0009 12:35:29 Msec=2250 True Az=112.995 Ze=-80.58 Az status=0008 Ze status=0009 12:35:29 Check angles 12:35:29 SkyScan query 12:35:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 12:35:30 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 12:35:30 Check angles 12:35:30 SkyScan query 12:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.25<-14550 Statuses=0008 0009 12:35:31 Msec=3750 True Az=112.995 Ze=-38.25 Az status=0008 Ze status=0009 12:35:31 Check angles 12:35:31 SkyScan query 12:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.31<-13154 Statuses=0008 0009 12:35:31 Msec=4500 True Az=112.995 Ze=-17.31 Az status=0008 Ze status=0009 12:35:31 Check angles 12:35:31 SkyScan query 12:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 12:35:32 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 12:35:32 Check angles 12:35:32 SkyScan query 12:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:35:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:35:33 Message to Master queued w/err=0: serial=51490 error=0 12:35:38 Received message from Master: op=Filter serial=51491 12:35:38 Color wheel filter change from 0 to 0 12:35:38 FLIGetFilterPos err=0 currentPosition=0 12:35:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:38 Filter is already there-color wheel unchanged 12:35:38 Received message from Master: op=Shutter serial=51492 12:35:38 Shutter LASER close 12:35:38 Received message from Camera: op=State serial=51494 12:35:38 GetSingleValue result=40 Value=cccccccc 12:35:38 SkyScan query 12:35:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:35:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:39 Parameters OK 12:35:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:39 Set A/D data flow result=40 12:35:39 Set A/D channel type result=40 12:35:39 Set A/D encoding result=40 12:35:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:39 Set channel filter=0.000000e+000 result=40 12:35:39 Config A/D Result=40 12:35:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:39 Get A/D filter: -9.255963e+061 result=40 12:35:39 Get A/D value=-858993460 result=40 12:35:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:39 Parameters OK 12:35:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:39 Set A/D data flow result=40 12:35:39 Set A/D channel type result=40 12:35:39 Set A/D encoding result=40 12:35:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:39 Set channel filter=0.000000e+000 result=40 12:35:39 Config A/D Result=40 12:35:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:39 Get A/D filter: -9.255963e+061 result=40 12:35:39 Get A/D value=-858993460 result=40 12:35:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:39 Aux= 12:35:39 Message to Camera, serial 51494 queued 12:36:16 Received message from Master: op=PointingHead serial=51507 12:36:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:36:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:36:16 Point started: ret=0 12:36:16 point_skyscan result=0 12:36:17 Check angles 12:36:17 SkyScan query 12:36:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:36:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:36:17 Message to Master queued w/err=0: serial=51507 error=0 12:36:22 Received message from Master: op=Filter serial=51508 12:36:22 Color wheel filter change from 0 to 0 12:36:22 FLIGetFilterPos err=0 currentPosition=0 12:36:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:22 Filter is already there-color wheel unchanged 12:36:22 Received message from Master: op=Shutter serial=51509 12:36:22 Shutter LASER close 12:36:22 Received message from Camera: op=State serial=51511 12:36:22 GetSingleValue result=40 Value=cccccccc 12:36:22 SkyScan query 12:36:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:36:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:23 Parameters OK 12:36:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:23 Set A/D data flow result=40 12:36:23 Set A/D channel type result=40 12:36:23 Set A/D encoding result=40 12:36:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:23 Set channel filter=0.000000e+000 result=40 12:36:23 Config A/D Result=40 12:36:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:23 Get A/D filter: -9.255963e+061 result=40 12:36:23 Get A/D value=-858993460 result=40 12:36:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:23 Parameters OK 12:36:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:23 Set A/D data flow result=40 12:36:23 Set A/D channel type result=40 12:36:23 Set A/D encoding result=40 12:36:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:23 Set channel filter=0.000000e+000 result=40 12:36:23 Config A/D Result=40 12:36:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:23 Get A/D filter: -9.255963e+061 result=40 12:36:23 Get A/D value=-858993460 result=40 12:36:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:23 Aux= 12:36:23 Message to Camera, serial 51511 queued 12:37:00 Received message from Master: op=PointingHead serial=51524 12:37:00 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:37:00 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:37:00 Point started: ret=0 12:37:00 point_skyscan result=0 12:37:01 Check angles 12:37:01 SkyScan query 12:37:02 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 12:37:02 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 12:37:02 Check angles 12:37:02 SkyScan query 12:37:02 SkyScan query done: ret=0 az=153.69<-10246 ze=-6.495<-12433 Statuses=0009 0008 12:37:02 Msec=750 True Az=153.69 Ze=-6.495 Az status=0009 Ze status=0008 12:37:03 Check angles 12:37:03 SkyScan query 12:37:03 SkyScan query done: ret=0 az=171.555<-11437 ze=-6.495<-12433 Statuses=0009 0008 12:37:03 Msec=1500 True Az=171.555 Ze=-6.495 Az status=0009 Ze status=0008 12:37:03 Check angles 12:37:03 SkyScan query 12:37:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:37:04 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:37:04 Message to Master queued w/err=0: serial=51524 error=0 12:37:09 Received message from Master: op=Filter serial=51525 12:37:09 Color wheel filter change from 0 to 0 12:37:09 FLIGetFilterPos err=0 currentPosition=0 12:37:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:09 Filter is already there-color wheel unchanged 12:37:09 Received message from Master: op=Shutter serial=51526 12:37:09 Shutter LASER close 12:37:09 Received message from Camera: op=State serial=51528 12:37:09 GetSingleValue result=40 Value=cccccccc 12:37:09 SkyScan query 12:37:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:37:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:10 Parameters OK 12:37:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:10 Set A/D data flow result=40 12:37:10 Set A/D channel type result=40 12:37:10 Set A/D encoding result=40 12:37:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:10 Set channel filter=0.000000e+000 result=40 12:37:10 Config A/D Result=40 12:37:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:10 Get A/D filter: -9.255963e+061 result=40 12:37:10 Get A/D value=-858993460 result=40 12:37:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:10 Parameters OK 12:37:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:10 Set A/D data flow result=40 12:37:10 Set A/D channel type result=40 12:37:10 Set A/D encoding result=40 12:37:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:10 Set channel filter=0.000000e+000 result=40 12:37:10 Config A/D Result=40 12:37:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:10 Get A/D filter: -9.255963e+061 result=40 12:37:10 Get A/D value=-858993460 result=40 12:37:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:10 Aux= 12:37:10 Message to Camera, serial 51528 queued 12:37:47 Received message from Master: op=PointingHead serial=51541 12:37:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:37:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:37:47 Point started: ret=0 12:37:47 point_skyscan result=0 12:37:48 Check angles 12:37:48 SkyScan query 12:37:48 SkyScan query done: ret=0 az=152.805<-10187 ze=6.51<-11566 Statuses=0009 0008 12:37:48 Msec=0 True Az=152.805 Ze=6.51 Az status=0009 Ze status=0008 12:37:48 Check angles 12:37:48 SkyScan query 12:37:49 SkyScan query done: ret=0 az=134.94<-8996 ze=6.495<-11567 Statuses=0009 0008 12:37:49 Msec=750 True Az=134.94 Ze=6.495 Az status=0009 Ze status=0008 12:37:49 Check angles 12:37:49 SkyScan query 12:37:50 SkyScan query done: ret=0 az=117.48<-7832 ze=6.495<-11567 Statuses=0009 0008 12:37:50 Msec=1500 True Az=117.48 Ze=6.495 Az status=0009 Ze status=0008 12:37:50 Check angles 12:37:50 SkyScan query 12:37:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:37:50 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:37:50 Message to Master queued w/err=0: serial=51541 error=0 12:37:55 Received message from Master: op=Filter serial=51542 12:37:55 Color wheel filter change from 0 to 0 12:37:55 FLIGetFilterPos err=0 currentPosition=0 12:37:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:55 Filter is already there-color wheel unchanged 12:37:56 Received message from Master: op=Shutter serial=51543 12:37:56 Shutter LASER close 12:37:56 Received message from Camera: op=State serial=51545 12:37:56 GetSingleValue result=40 Value=cccccccc 12:37:56 SkyScan query 12:37:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:37:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:56 Parameters OK 12:37:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:56 Set A/D data flow result=40 12:37:56 Set A/D channel type result=40 12:37:56 Set A/D encoding result=40 12:37:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:56 Set channel filter=0.000000e+000 result=40 12:37:56 Config A/D Result=40 12:37:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:56 Get A/D filter: -9.255963e+061 result=40 12:37:56 Get A/D value=-858993460 result=40 12:37:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:56 Parameters OK 12:37:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:56 Set A/D data flow result=40 12:37:56 Set A/D channel type result=40 12:37:56 Set A/D encoding result=40 12:37:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:56 Set channel filter=0.000000e+000 result=40 12:37:56 Config A/D Result=40 12:37:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:56 Get A/D filter: -9.255963e+061 result=40 12:37:56 Get A/D value=-858993460 result=40 12:37:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:56 Aux= 12:37:56 Message to Camera, serial 51545 queued 12:38:33 Received message from Master: op=PointingHead serial=51558 12:38:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:38:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:38:33 Point started: ret=0 12:38:33 point_skyscan result=0 12:38:34 Check angles 12:38:34 SkyScan query 12:38:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 12:38:35 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 12:38:35 Check angles 12:38:35 SkyScan query 12:38:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 12:38:36 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 12:38:36 Check angles 12:38:36 SkyScan query 12:38:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 12:38:36 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 12:38:36 Check angles 12:38:36 SkyScan query 12:38:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.745<-17783 Statuses=0008 0009 12:38:37 Msec=2250 True Az=112.995 Ze=-86.745 Az status=0008 Ze status=0009 12:38:37 Check angles 12:38:37 SkyScan query 12:38:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.715<-19181 Statuses=0008 0009 12:38:38 Msec=3000 True Az=112.995 Ze=-107.715 Az status=0008 Ze status=0009 12:38:38 Check angles 12:38:38 SkyScan query 12:38:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.075<-20605 Statuses=0008 0009 12:38:39 Msec=3750 True Az=112.995 Ze=-129.075 Az status=0008 Ze status=0009 12:38:39 Check angles 12:38:39 SkyScan query 12:38:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.03<-22002 Statuses=0008 0009 12:38:39 Msec=4500 True Az=112.995 Ze=-150.03 Az status=0008 Ze status=0009 12:38:39 Check angles 12:38:39 SkyScan query 12:38:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0008 0009 12:38:40 Msec=5250 True Az=112.995 Ze=-170.895 Az status=0008 Ze status=0009 12:38:40 Check angles 12:38:40 SkyScan query 12:38:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:38:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:38:41 Message to Master queued w/err=0: serial=51558 error=0 12:38:46 Received message from Master: op=Filter serial=51559 12:38:46 Color wheel filter change from 0 to 0 12:38:46 FLIGetFilterPos err=0 currentPosition=0 12:38:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:46 Filter is already there-color wheel unchanged 12:38:46 Received message from Master: op=Shutter serial=51560 12:38:46 Shutter LASER open 12:38:46 Received message from Camera: op=State serial=51562 12:38:46 GetSingleValue result=40 Value=cccccccc 12:38:46 SkyScan query 12:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:38:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:47 Parameters OK 12:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:47 Set A/D data flow result=40 12:38:47 Set A/D channel type result=40 12:38:47 Set A/D encoding result=40 12:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:47 Set channel filter=0.000000e+000 result=40 12:38:47 Config A/D Result=40 12:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:47 Get A/D filter: -9.255963e+061 result=40 12:38:47 Get A/D value=-858993460 result=40 12:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:47 Parameters OK 12:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:47 Set A/D data flow result=40 12:38:47 Set A/D channel type result=40 12:38:47 Set A/D encoding result=40 12:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:47 Set channel filter=0.000000e+000 result=40 12:38:47 Config A/D Result=40 12:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:47 Get A/D filter: -9.255963e+061 result=40 12:38:47 Get A/D value=-858993460 result=40 12:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:47 Aux= 12:38:47 Message to Camera, serial 51562 queued 12:38:55 Received message from Master: op=Shutter serial=51572 12:38:55 Shutter LASER close 12:38:56 Received message from Master: op=PointingHead serial=51576 12:38:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:38:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:38:56 Point started: ret=0 12:38:56 point_skyscan result=0 12:38:57 Check angles 12:38:57 SkyScan query 12:38:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.89<-21526 Statuses=0008 0009 12:38:57 Msec=0 True Az=112.995 Ze=-142.89 Az status=0008 Ze status=0009 12:38:57 Check angles 12:38:57 SkyScan query 12:38:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 12:38:58 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 12:38:58 Check angles 12:38:58 SkyScan query 12:38:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.995<-18733 Statuses=0008 0009 12:38:59 Msec=1500 True Az=112.995 Ze=-100.995 Az status=0008 Ze status=0009 12:38:59 Check angles 12:38:59 SkyScan query 12:39:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 12:39:00 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 12:39:00 Check angles 12:39:00 SkyScan query 12:39:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 12:39:00 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 12:39:00 Check angles 12:39:00 SkyScan query 12:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.115<-14541 Statuses=0008 0009 12:39:01 Msec=3750 True Az=112.995 Ze=-38.115 Az status=0008 Ze status=0009 12:39:01 Check angles 12:39:01 SkyScan query 12:39:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.175<-13145 Statuses=0008 0009 12:39:02 Msec=4500 True Az=112.995 Ze=-17.175 Az status=0008 Ze status=0009 12:39:02 Check angles 12:39:02 SkyScan query 12:39:03 SkyScan query done: ret=0 az=112.995<-7533 ze=3.795<-11747 Statuses=0008 0009 12:39:03 Msec=5250 True Az=112.995 Ze=3.795 Az status=0008 Ze status=0009 12:39:03 Check angles 12:39:03 SkyScan query 12:39:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:39:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:39:03 Message to Master queued w/err=0: serial=51576 error=0 12:39:08 Received message from Master: op=Filter serial=51577 12:39:08 Color wheel filter change from 0 to 0 12:39:08 FLIGetFilterPos err=0 currentPosition=0 12:39:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:08 Filter is already there-color wheel unchanged 12:39:08 Received message from Master: op=Shutter serial=51578 12:39:08 Shutter LASER close 12:39:09 Received message from Camera: op=State serial=51580 12:39:09 GetSingleValue result=40 Value=cccccccc 12:39:09 SkyScan query 12:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:39:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:09 Parameters OK 12:39:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:09 Set A/D data flow result=40 12:39:09 Set A/D channel type result=40 12:39:09 Set A/D encoding result=40 12:39:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:09 Set channel filter=0.000000e+000 result=40 12:39:09 Config A/D Result=40 12:39:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:09 Get A/D filter: -9.255963e+061 result=40 12:39:09 Get A/D value=-858993460 result=40 12:39:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:09 Parameters OK 12:39:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:09 Set A/D data flow result=40 12:39:09 Set A/D channel type result=40 12:39:09 Set A/D encoding result=40 12:39:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:09 Set channel filter=0.000000e+000 result=40 12:39:09 Config A/D Result=40 12:39:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:09 Get A/D filter: -9.255963e+061 result=40 12:39:09 Get A/D value=-858993460 result=40 12:39:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:09 Aux= 12:39:09 Message to Camera, serial 51580 queued 12:39:46 Received message from Master: op=PointingHead serial=51593 12:39:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:39:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:39:46 Point started: ret=0 12:39:46 point_skyscan result=0 12:39:47 Check angles 12:39:47 SkyScan query 12:39:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:39:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:39:48 Message to Master queued w/err=0: serial=51593 error=0 12:39:53 Received message from Master: op=Filter serial=51594 12:39:53 Color wheel filter change from 0 to 0 12:39:53 FLIGetFilterPos err=0 currentPosition=0 12:39:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:53 Filter is already there-color wheel unchanged 12:39:53 Received message from Master: op=Shutter serial=51595 12:39:53 Shutter LASER close 12:39:53 Received message from Camera: op=State serial=51597 12:39:53 GetSingleValue result=40 Value=cccccccc 12:39:53 SkyScan query 12:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:39:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:53 Parameters OK 12:39:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:53 Set A/D data flow result=40 12:39:53 Set A/D channel type result=40 12:39:53 Set A/D encoding result=40 12:39:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:53 Set channel filter=0.000000e+000 result=40 12:39:53 Config A/D Result=40 12:39:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:53 Get A/D filter: -9.255963e+061 result=40 12:39:53 Get A/D value=-858993460 result=40 12:39:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:53 Parameters OK 12:39:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:53 Set A/D data flow result=40 12:39:53 Set A/D channel type result=40 12:39:53 Set A/D encoding result=40 12:39:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:53 Set channel filter=0.000000e+000 result=40 12:39:53 Config A/D Result=40 12:39:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:53 Get A/D filter: -9.255963e+061 result=40 12:39:53 Get A/D value=-858993460 result=40 12:39:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:53 Aux= 12:39:53 Message to Camera, serial 51597 queued 12:40:29 Received message from Master: op=PointingHead serial=51609 12:40:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:40:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:40:30 Point started: ret=0 12:40:30 point_skyscan result=0 12:40:30 Check angles 12:40:30 SkyScan query 12:40:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:40:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:40:31 Message to Master queued w/err=0: serial=51609 error=0 12:40:36 Received message from Master: op=Filter serial=51610 12:40:36 Color wheel filter change from 0 to 0 12:40:36 FLIGetFilterPos err=0 currentPosition=0 12:40:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:36 Filter is already there-color wheel unchanged 12:40:36 Received message from Master: op=Shutter serial=51611 12:40:36 Shutter LASER close 12:40:36 Received message from Camera: op=State serial=51613 12:40:36 GetSingleValue result=40 Value=cccccccc 12:40:36 SkyScan query 12:40:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:40:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:37 Parameters OK 12:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:37 Set A/D data flow result=40 12:40:37 Set A/D channel type result=40 12:40:37 Set A/D encoding result=40 12:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:37 Set channel filter=0.000000e+000 result=40 12:40:37 Config A/D Result=40 12:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:37 Get A/D filter: -9.255963e+061 result=40 12:40:37 Get A/D value=-858993460 result=40 12:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:37 Parameters OK 12:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:37 Set A/D data flow result=40 12:40:37 Set A/D channel type result=40 12:40:37 Set A/D encoding result=40 12:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:37 Set channel filter=0.000000e+000 result=40 12:40:37 Config A/D Result=40 12:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:37 Get A/D filter: -9.255963e+061 result=40 12:40:37 Get A/D value=-858993460 result=40 12:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:37 Aux= 12:40:37 Message to Camera, serial 51613 queued 12:41:14 Received message from Master: op=PointingHead serial=51626 12:41:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:41:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:41:14 Point started: ret=0 12:41:14 point_skyscan result=0 12:41:15 Check angles 12:41:15 SkyScan query 12:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:41:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:41:15 Message to Master queued w/err=0: serial=51626 error=0 12:41:20 Received message from Master: op=Filter serial=51627 12:41:20 Color wheel filter change from 0 to 0 12:41:20 FLIGetFilterPos err=0 currentPosition=0 12:41:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:20 Filter is already there-color wheel unchanged 12:41:21 Received message from Master: op=Shutter serial=51628 12:41:21 Shutter LASER close 12:41:21 Received message from Camera: op=State serial=51630 12:41:21 GetSingleValue result=40 Value=cccccccc 12:41:21 SkyScan query 12:41:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:41:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:21 Parameters OK 12:41:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:21 Set A/D data flow result=40 12:41:21 Set A/D channel type result=40 12:41:21 Set A/D encoding result=40 12:41:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:21 Set channel filter=0.000000e+000 result=40 12:41:21 Config A/D Result=40 12:41:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:21 Get A/D filter: -9.255963e+061 result=40 12:41:21 Get A/D value=-858993460 result=40 12:41:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:21 Parameters OK 12:41:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:21 Set A/D data flow result=40 12:41:21 Set A/D channel type result=40 12:41:21 Set A/D encoding result=40 12:41:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:21 Set channel filter=0.000000e+000 result=40 12:41:21 Config A/D Result=40 12:41:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:21 Get A/D filter: -9.255963e+061 result=40 12:41:21 Get A/D value=-858993460 result=40 12:41:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:21 Aux= 12:41:21 Message to Camera, serial 51630 queued 12:41:58 Received message from Master: op=PointingHead serial=51643 12:41:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:41:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:41:58 Point started: ret=0 12:41:58 point_skyscan result=0 12:41:59 Check angles 12:41:59 SkyScan query 12:42:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 12:42:00 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 12:42:00 Check angles 12:42:00 SkyScan query 12:42:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 12:42:00 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 12:42:01 Check angles 12:42:01 SkyScan query 12:42:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 12:42:01 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 12:42:01 Check angles 12:42:01 SkyScan query 12:42:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 12:42:02 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 12:42:02 Check angles 12:42:02 SkyScan query 12:42:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.895<-19193 Statuses=0008 0009 12:42:03 Msec=3000 True Az=112.995 Ze=-107.895 Az status=0008 Ze status=0009 12:42:03 Check angles 12:42:03 SkyScan query 12:42:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.27<-20618 Statuses=0008 0009 12:42:04 Msec=3750 True Az=112.995 Ze=-129.27 Az status=0008 Ze status=0009 12:42:04 Check angles 12:42:04 SkyScan query 12:42:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.225<-22015 Statuses=0008 0009 12:42:04 Msec=4500 True Az=112.995 Ze=-150.225 Az status=0008 Ze status=0009 12:42:04 Check angles 12:42:04 SkyScan query 12:42:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.375<-23425 Statuses=0008 0009 12:42:05 Msec=5250 True Az=112.995 Ze=-171.375 Az status=0008 Ze status=0009 12:42:05 Check angles 12:42:05 SkyScan query 12:42:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:42:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:42:06 Message to Master queued w/err=0: serial=51643 error=0 12:42:11 Received message from Master: op=Filter serial=51644 12:42:11 Color wheel filter change from 0 to 0 12:42:11 FLIGetFilterPos err=0 currentPosition=0 12:42:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:11 Filter is already there-color wheel unchanged 12:42:11 Received message from Master: op=Shutter serial=51645 12:42:11 Shutter LASER open 12:42:11 Received message from Camera: op=State serial=51647 12:42:11 GetSingleValue result=40 Value=cccccccc 12:42:11 SkyScan query 12:42:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:42:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:12 Parameters OK 12:42:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:12 Set A/D data flow result=40 12:42:12 Set A/D channel type result=40 12:42:12 Set A/D encoding result=40 12:42:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:12 Set channel filter=0.000000e+000 result=40 12:42:12 Config A/D Result=40 12:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:12 Get A/D filter: -9.255963e+061 result=40 12:42:12 Get A/D value=-858993460 result=40 12:42:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:12 Parameters OK 12:42:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:12 Set A/D data flow result=40 12:42:12 Set A/D channel type result=40 12:42:12 Set A/D encoding result=40 12:42:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:12 Set channel filter=0.000000e+000 result=40 12:42:12 Config A/D Result=40 12:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:12 Get A/D filter: -9.255963e+061 result=40 12:42:12 Get A/D value=-858993460 result=40 12:42:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:12 Aux= 12:42:12 Message to Camera, serial 51647 queued 12:42:20 Received message from Master: op=Shutter serial=51657 12:42:20 Shutter LASER close 12:42:21 Received message from Master: op=PointingHead serial=51661 12:42:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:42:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:42:21 Point started: ret=0 12:42:21 point_skyscan result=0 12:42:22 Check angles 12:42:22 SkyScan query 12:42:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 12:42:22 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 12:42:23 Check angles 12:42:23 SkyScan query 12:42:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.4<-20160 Statuses=0008 0009 12:42:23 Msec=750 True Az=112.995 Ze=-122.4 Az status=0008 Ze status=0009 12:42:23 Check angles 12:42:23 SkyScan query 12:42:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 12:42:24 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 12:42:24 Check angles 12:42:24 SkyScan query 12:42:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 12:42:25 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 12:42:25 Check angles 12:42:25 SkyScan query 12:42:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.115<-15941 Statuses=0008 0009 12:42:25 Msec=3000 True Az=112.995 Ze=-59.115 Az status=0008 Ze status=0009 12:42:26 Check angles 12:42:26 SkyScan query 12:42:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.13<-14542 Statuses=0008 0009 12:42:26 Msec=3750 True Az=112.995 Ze=-38.13 Az status=0008 Ze status=0009 12:42:26 Check angles 12:42:26 SkyScan query 12:42:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 12:42:27 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 12:42:27 Check angles 12:42:27 SkyScan query 12:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 12:42:28 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 12:42:28 Check angles 12:42:28 SkyScan query 12:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:42:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:42:28 Message to Master queued w/err=0: serial=51661 error=0 12:42:33 Received message from Master: op=Filter serial=51662 12:42:33 Color wheel filter change from 0 to 0 12:42:33 FLIGetFilterPos err=0 currentPosition=0 12:42:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:33 Filter is already there-color wheel unchanged 12:42:34 Received message from Master: op=Shutter serial=51663 12:42:34 Shutter LASER close 12:42:34 Received message from Camera: op=State serial=51665 12:42:34 GetSingleValue result=40 Value=cccccccc 12:42:34 SkyScan query 12:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:42:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:34 Parameters OK 12:42:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:34 Set A/D data flow result=40 12:42:34 Set A/D channel type result=40 12:42:34 Set A/D encoding result=40 12:42:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:34 Set channel filter=0.000000e+000 result=40 12:42:34 Config A/D Result=40 12:42:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:34 Get A/D filter: -9.255963e+061 result=40 12:42:34 Get A/D value=-858993460 result=40 12:42:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:34 Parameters OK 12:42:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:34 Set A/D data flow result=40 12:42:34 Set A/D channel type result=40 12:42:34 Set A/D encoding result=40 12:42:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:34 Set channel filter=0.000000e+000 result=40 12:42:34 Config A/D Result=40 12:42:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:34 Get A/D filter: -9.255963e+061 result=40 12:42:34 Get A/D value=-858993460 result=40 12:42:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:34 Aux= 12:42:34 Message to Camera, serial 51665 queued 12:43:11 Received message from Master: op=PointingHead serial=51678 12:43:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:43:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:43:12 Point started: ret=0 12:43:12 point_skyscan result=0 12:43:12 Check angles 12:43:12 SkyScan query 12:43:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:43:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:43:13 Message to Master queued w/err=0: serial=51678 error=0 12:43:18 Received message from Master: op=Filter serial=51679 12:43:18 Color wheel filter change from 0 to 0 12:43:18 FLIGetFilterPos err=0 currentPosition=0 12:43:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:18 Filter is already there-color wheel unchanged 12:43:18 Received message from Master: op=Shutter serial=51680 12:43:18 Shutter LASER close 12:43:18 Received message from Camera: op=State serial=51682 12:43:18 GetSingleValue result=40 Value=cccccccc 12:43:18 SkyScan query 12:43:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:43:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:19 Parameters OK 12:43:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:19 Set A/D data flow result=40 12:43:19 Set A/D channel type result=40 12:43:19 Set A/D encoding result=40 12:43:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:19 Set channel filter=0.000000e+000 result=40 12:43:19 Config A/D Result=40 12:43:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:19 Get A/D filter: -9.255963e+061 result=40 12:43:19 Get A/D value=-858993460 result=40 12:43:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:19 Parameters OK 12:43:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:19 Set A/D data flow result=40 12:43:19 Set A/D channel type result=40 12:43:19 Set A/D encoding result=40 12:43:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:19 Set channel filter=0.000000e+000 result=40 12:43:19 Config A/D Result=40 12:43:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:19 Get A/D filter: -9.255963e+061 result=40 12:43:19 Get A/D value=-858993460 result=40 12:43:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:19 Aux= 12:43:19 Message to Camera, serial 51682 queued [UTC 2019-3-1 12:43:50] 12:43:55 Received message from Master: op=PointingHead serial=51695 12:43:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:43:55 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:43:56 Point started: ret=0 12:43:56 point_skyscan result=0 12:43:57 Check angles 12:43:57 SkyScan query 12:43:57 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 12:43:57 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 12:43:57 Check angles 12:43:57 SkyScan query 12:43:58 SkyScan query done: ret=0 az=153.645<-10243 ze=-6.495<-12433 Statuses=0009 0008 12:43:58 Msec=750 True Az=153.645 Ze=-6.495 Az status=0009 Ze status=0008 12:43:58 Check angles 12:43:58 SkyScan query 12:43:59 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 12:43:59 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 12:43:59 Check angles 12:43:59 SkyScan query 12:43:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:43:59 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:43:59 Message to Master queued w/err=0: serial=51695 error=0 12:44:04 Received message from Master: op=Filter serial=51696 12:44:04 Color wheel filter change from 0 to 0 12:44:04 FLIGetFilterPos err=0 currentPosition=0 12:44:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:04 Filter is already there-color wheel unchanged 12:44:05 Received message from Master: op=Shutter serial=51697 12:44:05 Shutter LASER close 12:44:05 Received message from Camera: op=State serial=51699 12:44:05 GetSingleValue result=40 Value=cccccccc 12:44:05 SkyScan query 12:44:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:44:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:05 Parameters OK 12:44:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:05 Set A/D data flow result=40 12:44:05 Set A/D channel type result=40 12:44:05 Set A/D encoding result=40 12:44:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:05 Set channel filter=0.000000e+000 result=40 12:44:05 Config A/D Result=40 12:44:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:05 Get A/D filter: -9.255963e+061 result=40 12:44:05 Get A/D value=-858993460 result=40 12:44:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:05 Parameters OK 12:44:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:05 Set A/D data flow result=40 12:44:05 Set A/D channel type result=40 12:44:05 Set A/D encoding result=40 12:44:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:05 Set channel filter=0.000000e+000 result=40 12:44:05 Config A/D Result=40 12:44:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:05 Get A/D filter: -9.255963e+061 result=40 12:44:05 Get A/D value=-858993460 result=40 12:44:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:05 Aux= 12:44:05 Message to Camera, serial 51699 queued 12:44:42 Received message from Master: op=PointingHead serial=51712 12:44:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:44:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:44:42 Point started: ret=0 12:44:42 point_skyscan result=0 12:44:43 Check angles 12:44:43 SkyScan query 12:44:44 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 12:44:44 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 12:44:44 Check angles 12:44:44 SkyScan query 12:44:44 SkyScan query done: ret=0 az=135.435<-9029 ze=6.495<-11567 Statuses=0009 0008 12:44:44 Msec=750 True Az=135.435 Ze=6.495 Az status=0009 Ze status=0008 12:44:45 Check angles 12:44:45 SkyScan query 12:44:45 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 12:44:45 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 12:44:45 Check angles 12:44:45 SkyScan query 12:44:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:44:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:44:46 Message to Master queued w/err=0: serial=51712 error=0 12:44:51 Received message from Master: op=Filter serial=51713 12:44:51 Color wheel filter change from 0 to 0 12:44:51 FLIGetFilterPos err=0 currentPosition=0 12:44:51 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:51 Filter is already there-color wheel unchanged 12:44:51 Received message from Master: op=Shutter serial=51714 12:44:51 Shutter LASER close 12:44:51 Received message from Camera: op=State serial=51716 12:44:51 GetSingleValue result=40 Value=cccccccc 12:44:51 SkyScan query 12:44:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:44:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:52 Parameters OK 12:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:52 Set A/D data flow result=40 12:44:52 Set A/D channel type result=40 12:44:52 Set A/D encoding result=40 12:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:52 Set channel filter=0.000000e+000 result=40 12:44:52 Config A/D Result=40 12:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:52 Get A/D filter: -9.255963e+061 result=40 12:44:52 Get A/D value=-858993460 result=40 12:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:52 Parameters OK 12:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:52 Set A/D data flow result=40 12:44:52 Set A/D channel type result=40 12:44:52 Set A/D encoding result=40 12:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:52 Set channel filter=0.000000e+000 result=40 12:44:52 Config A/D Result=40 12:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:52 Get A/D filter: -9.255963e+061 result=40 12:44:52 Get A/D value=-858993460 result=40 12:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:52 Aux= 12:44:52 Message to Camera, serial 51716 queued 12:45:29 Received message from Master: op=PointingHead serial=51729 12:45:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:45:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:45:29 Point started: ret=0 12:45:29 point_skyscan result=0 12:45:30 Check angles 12:45:30 SkyScan query 12:45:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 12:45:30 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 12:45:30 Check angles 12:45:30 SkyScan query 12:45:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.175<-14945 Statuses=0008 0009 12:45:31 Msec=750 True Az=112.995 Ze=-44.175 Az status=0008 Ze status=0009 12:45:31 Check angles 12:45:31 SkyScan query 12:45:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.115<-16341 Statuses=0008 0009 12:45:32 Msec=1500 True Az=112.995 Ze=-65.115 Az status=0008 Ze status=0009 12:45:32 Check angles 12:45:32 SkyScan query 12:45:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.145<-17743 Statuses=0008 0009 12:45:32 Msec=2250 True Az=112.995 Ze=-86.145 Az status=0008 Ze status=0009 12:45:33 Check angles 12:45:33 SkyScan query 12:45:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.025<-19135 Statuses=0008 0009 12:45:33 Msec=3000 True Az=112.995 Ze=-107.025 Az status=0008 Ze status=0009 12:45:33 Check angles 12:45:33 SkyScan query 12:45:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.995<-20533 Statuses=0008 0009 12:45:34 Msec=3750 True Az=112.995 Ze=-127.995 Az status=0008 Ze status=0009 12:45:34 Check angles 12:45:34 SkyScan query 12:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.95<-21930 Statuses=0008 0009 12:45:35 Msec=4500 True Az=112.995 Ze=-148.95 Az status=0008 Ze status=0009 12:45:35 Check angles 12:45:35 SkyScan query 12:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.325<-23355 Statuses=0008 0009 12:45:35 Msec=5250 True Az=112.995 Ze=-170.325 Az status=0008 Ze status=0009 12:45:36 Check angles 12:45:36 SkyScan query 12:45:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:45:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:45:36 Message to Master queued w/err=0: serial=51729 error=0 12:45:41 Received message from Master: op=Filter serial=51730 12:45:41 Color wheel filter change from 0 to 0 12:45:41 FLIGetFilterPos err=0 currentPosition=0 12:45:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:41 Filter is already there-color wheel unchanged 12:45:41 Received message from Master: op=Shutter serial=51731 12:45:41 Shutter LASER open 12:45:42 Received message from Camera: op=State serial=51733 12:45:42 GetSingleValue result=40 Value=cccccccc 12:45:42 SkyScan query 12:45:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:45:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:42 Parameters OK 12:45:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:42 Set A/D data flow result=40 12:45:42 Set A/D channel type result=40 12:45:42 Set A/D encoding result=40 12:45:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:42 Set channel filter=0.000000e+000 result=40 12:45:42 Config A/D Result=40 12:45:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:42 Get A/D filter: -9.255963e+061 result=40 12:45:42 Get A/D value=-858993460 result=40 12:45:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:42 Parameters OK 12:45:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:42 Set A/D data flow result=40 12:45:42 Set A/D channel type result=40 12:45:42 Set A/D encoding result=40 12:45:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:42 Set channel filter=0.000000e+000 result=40 12:45:42 Config A/D Result=40 12:45:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:42 Get A/D filter: -9.255963e+061 result=40 12:45:42 Get A/D value=-858993460 result=40 12:45:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:42 Aux= 12:45:42 Message to Camera, serial 51733 queued 12:45:51 Received message from Master: op=Shutter serial=51743 12:45:51 Shutter LASER close 12:45:51 Received message from Master: op=PointingHead serial=51747 12:45:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:45:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:45:51 Point started: ret=0 12:45:51 point_skyscan result=0 12:45:52 Check angles 12:45:52 SkyScan query 12:45:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 12:45:53 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 12:45:53 Check angles 12:45:53 SkyScan query 12:45:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 12:45:53 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 12:45:54 Check angles 12:45:54 SkyScan query 12:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.56<-18704 Statuses=0008 0009 12:45:54 Msec=1500 True Az=112.995 Ze=-100.56 Az status=0008 Ze status=0009 12:45:54 Check angles 12:45:54 SkyScan query 12:45:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.605<-17307 Statuses=0008 0009 12:45:55 Msec=2250 True Az=112.995 Ze=-79.605 Az status=0008 Ze status=0009 12:45:55 Check angles 12:45:55 SkyScan query 12:45:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.2<-15880 Statuses=0008 0009 12:45:56 Msec=3000 True Az=112.995 Ze=-58.2 Az status=0008 Ze status=0009 12:45:56 Check angles 12:45:56 SkyScan query 12:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.795<-14453 Statuses=0008 0009 12:45:57 Msec=3750 True Az=112.995 Ze=-36.795 Az status=0008 Ze status=0009 12:45:57 Check angles 12:45:57 SkyScan query 12:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.42<-13028 Statuses=0008 0009 12:45:57 Msec=4500 True Az=112.995 Ze=-15.42 Az status=0008 Ze status=0009 12:45:57 Check angles 12:45:57 SkyScan query 12:45:58 SkyScan query done: ret=0 az=112.995<-7533 ze=5.19<-11654 Statuses=0008 0009 12:45:58 Msec=5250 True Az=112.995 Ze=5.19 Az status=0008 Ze status=0009 12:45:58 Check angles 12:45:58 SkyScan query 12:45:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:45:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:45:59 Message to Master queued w/err=0: serial=51747 error=0 12:46:04 Received message from Master: op=Filter serial=51748 12:46:04 Color wheel filter change from 0 to 0 12:46:04 FLIGetFilterPos err=0 currentPosition=0 12:46:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:04 Filter is already there-color wheel unchanged 12:46:04 Received message from Master: op=Shutter serial=51749 12:46:04 Shutter LASER close 12:46:04 Received message from Camera: op=State serial=51751 12:46:04 GetSingleValue result=40 Value=cccccccc 12:46:04 SkyScan query 12:46:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:46:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:05 Parameters OK 12:46:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:05 Set A/D data flow result=40 12:46:05 Set A/D channel type result=40 12:46:05 Set A/D encoding result=40 12:46:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:05 Set channel filter=0.000000e+000 result=40 12:46:05 Config A/D Result=40 12:46:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:05 Get A/D filter: -9.255963e+061 result=40 12:46:05 Get A/D value=-858993460 result=40 12:46:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:05 Parameters OK 12:46:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:05 Set A/D data flow result=40 12:46:05 Set A/D channel type result=40 12:46:05 Set A/D encoding result=40 12:46:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:05 Set channel filter=0.000000e+000 result=40 12:46:05 Config A/D Result=40 12:46:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:05 Get A/D filter: -9.255963e+061 result=40 12:46:05 Get A/D value=-858993460 result=40 12:46:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:05 Aux= 12:46:05 Message to Camera, serial 51751 queued 12:46:42 Received message from Master: op=PointingHead serial=51764 12:46:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:46:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:46:42 Point started: ret=0 12:46:42 point_skyscan result=0 12:46:43 Check angles 12:46:43 SkyScan query 12:46:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:46:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:46:43 Message to Master queued w/err=0: serial=51764 error=0 12:46:48 Received message from Master: op=Filter serial=51765 12:46:48 Color wheel filter change from 0 to 0 12:46:48 FLIGetFilterPos err=0 currentPosition=0 12:46:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:48 Filter is already there-color wheel unchanged 12:46:48 Received message from Master: op=Shutter serial=51766 12:46:48 Shutter LASER close 12:46:48 Received message from Camera: op=State serial=51768 12:46:48 GetSingleValue result=40 Value=cccccccc 12:46:48 SkyScan query 12:46:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:46:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:49 Parameters OK 12:46:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:49 Set A/D data flow result=40 12:46:49 Set A/D channel type result=40 12:46:49 Set A/D encoding result=40 12:46:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:49 Set channel filter=0.000000e+000 result=40 12:46:49 Config A/D Result=40 12:46:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:49 Get A/D filter: -9.255963e+061 result=40 12:46:49 Get A/D value=-858993460 result=40 12:46:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:49 Parameters OK 12:46:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:49 Set A/D data flow result=40 12:46:49 Set A/D channel type result=40 12:46:49 Set A/D encoding result=40 12:46:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:49 Set channel filter=0.000000e+000 result=40 12:46:49 Config A/D Result=40 12:46:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:49 Get A/D filter: -9.255963e+061 result=40 12:46:49 Get A/D value=-858993460 result=40 12:46:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:49 Aux= 12:46:49 Message to Camera, serial 51768 queued 12:47:26 Received message from Master: op=PointingHead serial=51781 12:47:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:47:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:47:26 Point started: ret=0 12:47:26 point_skyscan result=0 12:47:27 Check angles 12:47:27 SkyScan query 12:47:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:47:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:47:28 Message to Master queued w/err=0: serial=51781 error=0 12:47:33 Received message from Master: op=Filter serial=51782 12:47:33 Color wheel filter change from 0 to 0 12:47:33 FLIGetFilterPos err=0 currentPosition=0 12:47:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:33 Filter is already there-color wheel unchanged 12:47:33 Received message from Master: op=Shutter serial=51783 12:47:33 Shutter LASER close 12:47:33 Received message from Camera: op=State serial=51785 12:47:33 GetSingleValue result=40 Value=cccccccc 12:47:33 SkyScan query 12:47:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:47:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:33 Parameters OK 12:47:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:33 Set A/D data flow result=40 12:47:33 Set A/D channel type result=40 12:47:33 Set A/D encoding result=40 12:47:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:33 Set channel filter=0.000000e+000 result=40 12:47:33 Config A/D Result=40 12:47:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:33 Get A/D filter: -9.255963e+061 result=40 12:47:33 Get A/D value=-858993460 result=40 12:47:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:33 Parameters OK 12:47:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:33 Set A/D data flow result=40 12:47:33 Set A/D channel type result=40 12:47:33 Set A/D encoding result=40 12:47:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:33 Set channel filter=0.000000e+000 result=40 12:47:33 Config A/D Result=40 12:47:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:33 Get A/D filter: -9.255963e+061 result=40 12:47:33 Get A/D value=-858993460 result=40 12:47:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:33 Aux= 12:47:33 Message to Camera, serial 51785 queued 12:48:10 Received message from Master: op=PointingHead serial=51798 12:48:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:48:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:48:11 Point started: ret=0 12:48:11 point_skyscan result=0 12:48:11 Check angles 12:48:11 SkyScan query 12:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:48:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:48:12 Message to Master queued w/err=0: serial=51798 error=0 12:48:17 Received message from Master: op=Filter serial=51799 12:48:17 Color wheel filter change from 0 to 0 12:48:17 FLIGetFilterPos err=0 currentPosition=0 12:48:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:17 Filter is already there-color wheel unchanged 12:48:17 Received message from Master: op=Shutter serial=51800 12:48:17 Shutter LASER close 12:48:17 Received message from Camera: op=State serial=51802 12:48:17 GetSingleValue result=40 Value=cccccccc 12:48:17 SkyScan query 12:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:48:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:18 Parameters OK 12:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:18 Set A/D data flow result=40 12:48:18 Set A/D channel type result=40 12:48:18 Set A/D encoding result=40 12:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:18 Set channel filter=0.000000e+000 result=40 12:48:18 Config A/D Result=40 12:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:18 Get A/D filter: -9.255963e+061 result=40 12:48:18 Get A/D value=-858993460 result=40 12:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:18 Parameters OK 12:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:18 Set A/D data flow result=40 12:48:18 Set A/D channel type result=40 12:48:18 Set A/D encoding result=40 12:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:18 Set channel filter=0.000000e+000 result=40 12:48:18 Config A/D Result=40 12:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:18 Get A/D filter: -9.255963e+061 result=40 12:48:18 Get A/D value=-858993460 result=40 12:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:18 Aux= 12:48:18 Message to Camera, serial 51802 queued 12:48:54 Received message from Master: op=PointingHead serial=51815 12:48:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:48:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:48:55 Point started: ret=0 12:48:55 point_skyscan result=0 12:48:56 Check angles 12:48:56 SkyScan query 12:48:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 12:48:56 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 12:48:56 Check angles 12:48:56 SkyScan query 12:48:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 12:48:57 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 12:48:57 Check angles 12:48:57 SkyScan query 12:48:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.04<-16336 Statuses=0008 0009 12:48:58 Msec=1500 True Az=112.995 Ze=-65.04 Az status=0008 Ze status=0009 12:48:58 Check angles 12:48:58 SkyScan query 12:48:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 12:48:58 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 12:48:59 Check angles 12:48:59 SkyScan query 12:48:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.805<-19187 Statuses=0008 0009 12:48:59 Msec=3000 True Az=112.995 Ze=-107.805 Az status=0008 Ze status=0009 12:48:59 Check angles 12:48:59 SkyScan query 12:49:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 12:49:00 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 12:49:00 Check angles 12:49:00 SkyScan query 12:49:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.15<-22010 Statuses=0008 0009 12:49:01 Msec=4500 True Az=112.995 Ze=-150.15 Az status=0008 Ze status=0009 12:49:01 Check angles 12:49:01 SkyScan query 12:49:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.33<-23422 Statuses=0008 0009 12:49:01 Msec=5250 True Az=112.995 Ze=-171.33 Az status=0008 Ze status=0009 12:49:02 Check angles 12:49:02 SkyScan query 12:49:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:49:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:49:02 Message to Master queued w/err=0: serial=51815 error=0 12:49:07 Received message from Master: op=Filter serial=51816 12:49:07 Color wheel filter change from 0 to 0 12:49:07 FLIGetFilterPos err=0 currentPosition=0 12:49:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:07 Filter is already there-color wheel unchanged 12:49:07 Received message from Master: op=Shutter serial=51817 12:49:07 Shutter LASER open 12:49:08 Received message from Camera: op=State serial=51819 12:49:08 GetSingleValue result=40 Value=cccccccc 12:49:08 SkyScan query 12:49:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:49:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:08 Parameters OK 12:49:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:08 Set A/D data flow result=40 12:49:08 Set A/D channel type result=40 12:49:08 Set A/D encoding result=40 12:49:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:08 Set channel filter=0.000000e+000 result=40 12:49:08 Config A/D Result=40 12:49:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:08 Get A/D filter: -9.255963e+061 result=40 12:49:08 Get A/D value=-858993460 result=40 12:49:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:08 Parameters OK 12:49:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:08 Set A/D data flow result=40 12:49:08 Set A/D channel type result=40 12:49:08 Set A/D encoding result=40 12:49:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:08 Set channel filter=0.000000e+000 result=40 12:49:08 Config A/D Result=40 12:49:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:08 Get A/D filter: -9.255963e+061 result=40 12:49:08 Get A/D value=-858993460 result=40 12:49:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:08 Aux= 12:49:08 Message to Camera, serial 51819 queued 12:49:17 Received message from Master: op=Shutter serial=51829 12:49:17 Shutter LASER close 12:49:17 Received message from Master: op=PointingHead serial=51833 12:49:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:49:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:49:18 Point started: ret=0 12:49:18 point_skyscan result=0 12:49:18 Check angles 12:49:18 SkyScan query 12:49:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 12:49:19 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 12:49:19 Check angles 12:49:19 SkyScan query 12:49:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 12:49:20 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 12:49:20 Check angles 12:49:20 SkyScan query 12:49:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 12:49:20 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 12:49:21 Check angles 12:49:21 SkyScan query 12:49:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.53<-17302 Statuses=0008 0009 12:49:21 Msec=2250 True Az=112.995 Ze=-79.53 Az status=0008 Ze status=0009 12:49:21 Check angles 12:49:21 SkyScan query 12:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 12:49:22 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 12:49:22 Check angles 12:49:22 SkyScan query 12:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 12:49:23 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 12:49:23 Check angles 12:49:23 SkyScan query 12:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.23<-13082 Statuses=0008 0009 12:49:23 Msec=4500 True Az=112.995 Ze=-16.23 Az status=0008 Ze status=0009 12:49:24 Check angles 12:49:24 SkyScan query 12:49:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.905<-11673 Statuses=0008 0009 12:49:24 Msec=5250 True Az=112.995 Ze=4.905 Az status=0008 Ze status=0009 12:49:24 Check angles 12:49:24 SkyScan query 12:49:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:49:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:49:25 Message to Master queued w/err=0: serial=51833 error=0 12:49:30 Received message from Master: op=Filter serial=51834 12:49:30 Color wheel filter change from 0 to 0 12:49:30 FLIGetFilterPos err=0 currentPosition=0 12:49:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:30 Filter is already there-color wheel unchanged 12:49:30 Received message from Master: op=Shutter serial=51835 12:49:30 Shutter LASER close 12:49:30 Received message from Camera: op=State serial=51837 12:49:30 GetSingleValue result=40 Value=cccccccc 12:49:30 SkyScan query 12:49:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:49:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:31 Parameters OK 12:49:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:31 Set A/D data flow result=40 12:49:31 Set A/D channel type result=40 12:49:31 Set A/D encoding result=40 12:49:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:31 Set channel filter=0.000000e+000 result=40 12:49:31 Config A/D Result=40 12:49:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:31 Get A/D filter: -9.255963e+061 result=40 12:49:31 Get A/D value=-858993460 result=40 12:49:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:31 Parameters OK 12:49:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:31 Set A/D data flow result=40 12:49:31 Set A/D channel type result=40 12:49:31 Set A/D encoding result=40 12:49:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:31 Set channel filter=0.000000e+000 result=40 12:49:31 Config A/D Result=40 12:49:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:31 Get A/D filter: -9.255963e+061 result=40 12:49:31 Get A/D value=-858993460 result=40 12:49:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:31 Aux= 12:49:31 Message to Camera, serial 51837 queued 12:50:08 Received message from Master: op=PointingHead serial=51850 12:50:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:50:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:50:08 Point started: ret=0 12:50:08 point_skyscan result=0 12:50:09 Check angles 12:50:09 SkyScan query 12:50:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:50:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:50:09 Message to Master queued w/err=0: serial=51850 error=0 12:50:14 Received message from Master: op=Filter serial=51851 12:50:14 Color wheel filter change from 0 to 0 12:50:14 FLIGetFilterPos err=0 currentPosition=0 12:50:14 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:14 Filter is already there-color wheel unchanged 12:50:15 Received message from Master: op=Shutter serial=51852 12:50:15 Shutter LASER close 12:50:15 Received message from Camera: op=State serial=51854 12:50:15 GetSingleValue result=40 Value=cccccccc 12:50:15 SkyScan query 12:50:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:50:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:15 Parameters OK 12:50:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:15 Set A/D data flow result=40 12:50:15 Set A/D channel type result=40 12:50:15 Set A/D encoding result=40 12:50:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:15 Set channel filter=0.000000e+000 result=40 12:50:15 Config A/D Result=40 12:50:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:15 Get A/D filter: -9.255963e+061 result=40 12:50:15 Get A/D value=-858993460 result=40 12:50:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:15 Parameters OK 12:50:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:15 Set A/D data flow result=40 12:50:15 Set A/D channel type result=40 12:50:15 Set A/D encoding result=40 12:50:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:15 Set channel filter=0.000000e+000 result=40 12:50:15 Config A/D Result=40 12:50:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:15 Get A/D filter: -9.255963e+061 result=40 12:50:15 Get A/D value=-858993460 result=40 12:50:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:15 Aux= 12:50:15 Message to Camera, serial 51854 queued 12:50:52 Received message from Master: op=PointingHead serial=51867 12:50:52 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:50:52 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:50:52 Point started: ret=0 12:50:52 point_skyscan result=0 12:50:53 Check angles 12:50:53 SkyScan query 12:50:54 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 12:50:54 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 12:50:54 Check angles 12:50:54 SkyScan query 12:50:54 SkyScan query done: ret=0 az=153.3<-10220 ze=-6.495<-12433 Statuses=0009 0008 12:50:54 Msec=750 True Az=153.3 Ze=-6.495 Az status=0009 Ze status=0008 12:50:55 Check angles 12:50:55 SkyScan query 12:50:55 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.495<-12433 Statuses=0009 0008 12:50:55 Msec=1500 True Az=171.15 Ze=-6.495 Az status=0009 Ze status=0008 12:50:55 Check angles 12:50:55 SkyScan query 12:50:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:50:56 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:50:56 Message to Master queued w/err=0: serial=51867 error=0 12:51:01 Received message from Master: op=Filter serial=51868 12:51:01 Color wheel filter change from 0 to 0 12:51:01 FLIGetFilterPos err=0 currentPosition=0 12:51:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:01 Filter is already there-color wheel unchanged 12:51:01 Received message from Master: op=Shutter serial=51869 12:51:01 Shutter LASER close 12:51:01 Received message from Camera: op=State serial=51871 12:51:01 GetSingleValue result=40 Value=cccccccc 12:51:01 SkyScan query 12:51:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:51:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:02 Parameters OK 12:51:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:02 Set A/D data flow result=40 12:51:02 Set A/D channel type result=40 12:51:02 Set A/D encoding result=40 12:51:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:02 Set channel filter=0.000000e+000 result=40 12:51:02 Config A/D Result=40 12:51:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:02 Get A/D filter: -9.255963e+061 result=40 12:51:02 Get A/D value=-858993460 result=40 12:51:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:02 Parameters OK 12:51:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:02 Set A/D data flow result=40 12:51:02 Set A/D channel type result=40 12:51:02 Set A/D encoding result=40 12:51:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:02 Set channel filter=0.000000e+000 result=40 12:51:02 Config A/D Result=40 12:51:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:02 Get A/D filter: -9.255963e+061 result=40 12:51:02 Get A/D value=-858993460 result=40 12:51:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:02 Aux= 12:51:02 Message to Camera, serial 51871 queued 12:51:39 Received message from Master: op=PointingHead serial=51884 12:51:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:51:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:51:39 Point started: ret=0 12:51:39 point_skyscan result=0 12:51:40 Check angles 12:51:40 SkyScan query 12:51:40 SkyScan query done: ret=0 az=153.09<-10206 ze=6.51<-11566 Statuses=0009 0008 12:51:40 Msec=0 True Az=153.09 Ze=6.51 Az status=0009 Ze status=0008 12:51:40 Check angles 12:51:40 SkyScan query 12:51:41 SkyScan query done: ret=0 az=135.21<-9014 ze=6.495<-11567 Statuses=0009 0008 12:51:41 Msec=750 True Az=135.21 Ze=6.495 Az status=0009 Ze status=0008 12:51:41 Check angles 12:51:41 SkyScan query 12:51:42 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 12:51:42 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 12:51:42 Check angles 12:51:42 SkyScan query 12:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:51:43 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:51:43 Message to Master queued w/err=0: serial=51884 error=0 12:51:48 Received message from Master: op=Filter serial=51885 12:51:48 Color wheel filter change from 0 to 0 12:51:48 FLIGetFilterPos err=0 currentPosition=0 12:51:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:48 Filter is already there-color wheel unchanged 12:51:48 Received message from Master: op=Shutter serial=51886 12:51:48 Shutter LASER close 12:51:48 Received message from Camera: op=State serial=51888 12:51:48 GetSingleValue result=40 Value=cccccccc 12:51:48 SkyScan query 12:51:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:51:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:48 Parameters OK 12:51:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:48 Set A/D data flow result=40 12:51:48 Set A/D channel type result=40 12:51:48 Set A/D encoding result=40 12:51:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:48 Set channel filter=0.000000e+000 result=40 12:51:48 Config A/D Result=40 12:51:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:48 Get A/D filter: -9.255963e+061 result=40 12:51:48 Get A/D value=-858993460 result=40 12:51:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:48 Parameters OK 12:51:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:48 Set A/D data flow result=40 12:51:48 Set A/D channel type result=40 12:51:48 Set A/D encoding result=40 12:51:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:48 Set channel filter=0.000000e+000 result=40 12:51:48 Config A/D Result=40 12:51:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:48 Get A/D filter: -9.255963e+061 result=40 12:51:48 Get A/D value=-858993460 result=40 12:51:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:48 Aux= 12:51:48 Message to Camera, serial 51888 queued 12:52:25 Received message from Master: op=PointingHead serial=51901 12:52:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:52:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:52:26 Point started: ret=0 12:52:26 point_skyscan result=0 12:52:26 Check angles 12:52:26 SkyScan query 12:52:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 12:52:27 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 12:52:27 Check angles 12:52:27 SkyScan query 12:52:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 12:52:28 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 12:52:28 Check angles 12:52:28 SkyScan query 12:52:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 12:52:28 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 12:52:29 Check angles 12:52:29 SkyScan query 12:52:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 12:52:29 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 12:52:29 Check angles 12:52:29 SkyScan query 12:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.13<-19142 Statuses=0008 0009 12:52:30 Msec=3000 True Az=112.995 Ze=-107.13 Az status=0008 Ze status=0009 12:52:30 Check angles 12:52:30 SkyScan query 12:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.1<-20540 Statuses=0008 0009 12:52:31 Msec=3750 True Az=112.995 Ze=-128.1 Az status=0008 Ze status=0009 12:52:31 Check angles 12:52:31 SkyScan query 12:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.475<-21965 Statuses=0008 0009 12:52:31 Msec=4500 True Az=112.995 Ze=-149.475 Az status=0008 Ze status=0009 12:52:32 Check angles 12:52:32 SkyScan query 12:52:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.79<-23386 Statuses=0008 0009 12:52:32 Msec=5250 True Az=112.995 Ze=-170.79 Az status=0008 Ze status=0009 12:52:32 Check angles 12:52:32 SkyScan query 12:52:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:52:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:52:33 Message to Master queued w/err=0: serial=51901 error=0 12:52:38 Received message from Master: op=Filter serial=51902 12:52:38 Color wheel filter change from 0 to 0 12:52:38 FLIGetFilterPos err=0 currentPosition=0 12:52:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:38 Filter is already there-color wheel unchanged 12:52:38 Received message from Master: op=Shutter serial=51903 12:52:38 Shutter LASER open 12:52:38 Received message from Camera: op=State serial=51905 12:52:38 GetSingleValue result=40 Value=cccccccc 12:52:38 SkyScan query 12:52:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:52:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:39 Parameters OK 12:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:39 Set A/D data flow result=40 12:52:39 Set A/D channel type result=40 12:52:39 Set A/D encoding result=40 12:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:39 Set channel filter=0.000000e+000 result=40 12:52:39 Config A/D Result=40 12:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:39 Get A/D filter: -9.255963e+061 result=40 12:52:39 Get A/D value=-858993460 result=40 12:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:39 Parameters OK 12:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:39 Set A/D data flow result=40 12:52:39 Set A/D channel type result=40 12:52:39 Set A/D encoding result=40 12:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:39 Set channel filter=0.000000e+000 result=40 12:52:39 Config A/D Result=40 12:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:39 Get A/D filter: -9.255963e+061 result=40 12:52:39 Get A/D value=-858993460 result=40 12:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:39 Aux= 12:52:39 Message to Camera, serial 51905 queued 12:52:47 Received message from Master: op=Shutter serial=51915 12:52:47 Shutter LASER close 12:52:48 Received message from Master: op=PointingHead serial=51919 12:52:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:52:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:52:48 Point started: ret=0 12:52:48 point_skyscan result=0 12:52:49 Check angles 12:52:49 SkyScan query 12:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 12:52:49 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 12:52:50 Check angles 12:52:50 SkyScan query 12:52:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 12:52:50 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 12:52:50 Check angles 12:52:50 SkyScan query 12:52:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.235<-18749 Statuses=0008 0009 12:52:51 Msec=1500 True Az=112.995 Ze=-101.235 Az status=0008 Ze status=0009 12:52:51 Check angles 12:52:51 SkyScan query 12:52:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 12:52:52 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 12:52:52 Check angles 12:52:52 SkyScan query 12:52:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 12:52:52 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 12:52:53 Check angles 12:52:53 SkyScan query 12:52:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.935<-14529 Statuses=0008 0009 12:52:53 Msec=3750 True Az=112.995 Ze=-37.935 Az status=0008 Ze status=0009 12:52:53 Check angles 12:52:53 SkyScan query 12:52:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.98<-13132 Statuses=0008 0009 12:52:54 Msec=4500 True Az=112.995 Ze=-16.98 Az status=0008 Ze status=0009 12:52:54 Check angles 12:52:54 SkyScan query 12:52:55 SkyScan query done: ret=0 az=112.995<-7533 ze=4.35<-11710 Statuses=0008 0009 12:52:55 Msec=5250 True Az=112.995 Ze=4.35 Az status=0008 Ze status=0009 12:52:55 Check angles 12:52:55 SkyScan query 12:52:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:52:55 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:52:55 Message to Master queued w/err=0: serial=51919 error=0 12:53:00 Received message from Master: op=Filter serial=51920 12:53:00 Color wheel filter change from 0 to 0 12:53:00 FLIGetFilterPos err=0 currentPosition=0 12:53:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:00 Filter is already there-color wheel unchanged 12:53:01 Received message from Master: op=Shutter serial=51921 12:53:01 Shutter LASER close 12:53:01 Received message from Camera: op=State serial=51923 12:53:01 GetSingleValue result=40 Value=cccccccc 12:53:01 SkyScan query 12:53:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:53:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:01 Parameters OK 12:53:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:01 Set A/D data flow result=40 12:53:01 Set A/D channel type result=40 12:53:01 Set A/D encoding result=40 12:53:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:01 Set channel filter=0.000000e+000 result=40 12:53:01 Config A/D Result=40 12:53:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:01 Get A/D filter: -9.255963e+061 result=40 12:53:01 Get A/D value=-858993460 result=40 12:53:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:01 Parameters OK 12:53:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:01 Set A/D data flow result=40 12:53:01 Set A/D channel type result=40 12:53:01 Set A/D encoding result=40 12:53:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:01 Set channel filter=0.000000e+000 result=40 12:53:01 Config A/D Result=40 12:53:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:01 Get A/D filter: -9.255963e+061 result=40 12:53:01 Get A/D value=-858993460 result=40 12:53:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:01 Aux= 12:53:01 Message to Camera, serial 51923 queued 12:53:38 Received message from Master: op=PointingHead serial=51936 12:53:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:53:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:53:39 Point started: ret=0 12:53:39 point_skyscan result=0 12:53:39 Check angles 12:53:39 SkyScan query 12:53:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:53:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:53:40 Message to Master queued w/err=0: serial=51936 error=0 12:53:45 Received message from Master: op=Filter serial=51937 12:53:45 Color wheel filter change from 0 to 0 12:53:45 FLIGetFilterPos err=0 currentPosition=0 12:53:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:45 Filter is already there-color wheel unchanged 12:53:45 Received message from Master: op=Shutter serial=51938 12:53:45 Shutter LASER close 12:53:45 Received message from Camera: op=State serial=51940 12:53:45 GetSingleValue result=40 Value=cccccccc 12:53:45 SkyScan query 12:53:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:53:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:46 Parameters OK 12:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:46 Set A/D data flow result=40 12:53:46 Set A/D channel type result=40 12:53:46 Set A/D encoding result=40 12:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:46 Set channel filter=0.000000e+000 result=40 12:53:46 Config A/D Result=40 12:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:46 Get A/D filter: -9.255963e+061 result=40 12:53:46 Get A/D value=-858993460 result=40 12:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:46 Parameters OK 12:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:46 Set A/D data flow result=40 12:53:46 Set A/D channel type result=40 [UTC 2019-3-1 12:53:46] 12:53:46 Set A/D encoding result=40 12:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:46 Set channel filter=0.000000e+000 result=40 12:53:46 Config A/D Result=40 12:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:46 Get A/D filter: -9.255963e+061 result=40 12:53:46 Get A/D value=-858993460 result=40 12:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:46 Aux= 12:53:46 Message to Camera, serial 51940 queued 12:54:23 Received message from Master: op=PointingHead serial=51953 12:54:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:54:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:54:23 Point started: ret=0 12:54:23 point_skyscan result=0 12:54:24 Check angles 12:54:24 SkyScan query 12:54:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:54:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:54:24 Message to Master queued w/err=0: serial=51953 error=0 12:54:29 Received message from Master: op=Filter serial=51954 12:54:29 Color wheel filter change from 0 to 0 12:54:29 FLIGetFilterPos err=0 currentPosition=0 12:54:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:29 Filter is already there-color wheel unchanged 12:54:29 Received message from Master: op=Shutter serial=51955 12:54:29 Shutter LASER close 12:54:29 Received message from Camera: op=State serial=51957 12:54:29 GetSingleValue result=40 Value=cccccccc 12:54:29 SkyScan query 12:54:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:54:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:30 Parameters OK 12:54:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:30 Set A/D data flow result=40 12:54:30 Set A/D channel type result=40 12:54:30 Set A/D encoding result=40 12:54:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:30 Set channel filter=0.000000e+000 result=40 12:54:30 Config A/D Result=40 12:54:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:30 Get A/D filter: -9.255963e+061 result=40 12:54:30 Get A/D value=-858993460 result=40 12:54:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:30 Parameters OK 12:54:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:30 Set A/D data flow result=40 12:54:30 Set A/D channel type result=40 12:54:30 Set A/D encoding result=40 12:54:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:30 Set channel filter=0.000000e+000 result=40 12:54:30 Config A/D Result=40 12:54:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:30 Get A/D filter: -9.255963e+061 result=40 12:54:30 Get A/D value=-858993460 result=40 12:54:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:30 Aux= 12:54:30 Message to Camera, serial 51957 queued 12:55:07 Received message from Master: op=PointingHead serial=51970 12:55:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:55:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:55:07 Point started: ret=0 12:55:07 point_skyscan result=0 12:55:08 Check angles 12:55:08 SkyScan query 12:55:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:55:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:55:08 Message to Master queued w/err=0: serial=51970 error=0 12:55:13 Received message from Master: op=Filter serial=51971 12:55:13 Color wheel filter change from 0 to 0 12:55:13 FLIGetFilterPos err=0 currentPosition=0 12:55:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:13 Filter is already there-color wheel unchanged 12:55:14 Received message from Master: op=Shutter serial=51972 12:55:14 Shutter LASER close 12:55:14 Received message from Camera: op=State serial=51974 12:55:14 GetSingleValue result=40 Value=cccccccc 12:55:14 SkyScan query 12:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:55:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:14 Parameters OK 12:55:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:14 Set A/D data flow result=40 12:55:14 Set A/D channel type result=40 12:55:14 Set A/D encoding result=40 12:55:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:14 Set channel filter=0.000000e+000 result=40 12:55:14 Config A/D Result=40 12:55:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:14 Get A/D filter: -9.255963e+061 result=40 12:55:14 Get A/D value=-858993460 result=40 12:55:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:14 Parameters OK 12:55:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:14 Set A/D data flow result=40 12:55:14 Set A/D channel type result=40 12:55:14 Set A/D encoding result=40 12:55:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:14 Set channel filter=0.000000e+000 result=40 12:55:14 Config A/D Result=40 12:55:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:14 Get A/D filter: -9.255963e+061 result=40 12:55:14 Get A/D value=-858993460 result=40 12:55:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:14 Aux= 12:55:14 Message to Camera, serial 51974 queued 12:55:51 Received message from Master: op=PointingHead serial=51987 12:55:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:55:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:55:52 Point started: ret=0 12:55:52 point_skyscan result=0 12:55:52 Check angles 12:55:52 SkyScan query 12:55:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 12:55:53 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 12:55:53 Check angles 12:55:53 SkyScan query 12:55:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 12:55:54 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 12:55:54 Check angles 12:55:54 SkyScan query 12:55:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 12:55:54 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 12:55:55 Check angles 12:55:55 SkyScan query 12:55:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 12:55:55 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 12:55:55 Check angles 12:55:55 SkyScan query 12:55:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.655<-19177 Statuses=0008 0009 12:55:56 Msec=3000 True Az=112.995 Ze=-107.655 Az status=0008 Ze status=0009 12:55:56 Check angles 12:55:56 SkyScan query 12:55:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 12:55:57 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 12:55:57 Check angles 12:55:57 SkyScan query 12:55:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.55<-21970 Statuses=0008 0009 12:55:57 Msec=4500 True Az=112.995 Ze=-149.55 Az status=0008 Ze status=0009 12:55:58 Check angles 12:55:58 SkyScan query 12:55:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.49<-23366 Statuses=0008 0009 12:55:58 Msec=5250 True Az=112.995 Ze=-170.49 Az status=0008 Ze status=0009 12:55:58 Check angles 12:55:58 SkyScan query 12:55:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:55:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:55:59 Message to Master queued w/err=0: serial=51987 error=0 12:56:04 Received message from Master: op=Filter serial=51988 12:56:04 Color wheel filter change from 0 to 0 12:56:04 FLIGetFilterPos err=0 currentPosition=0 12:56:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:04 Filter is already there-color wheel unchanged 12:56:04 Received message from Master: op=Shutter serial=51989 12:56:04 Shutter LASER open 12:56:04 Received message from Camera: op=State serial=51991 12:56:04 GetSingleValue result=40 Value=cccccccc 12:56:04 SkyScan query 12:56:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:56:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:05 Parameters OK 12:56:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:05 Set A/D data flow result=40 12:56:05 Set A/D channel type result=40 12:56:05 Set A/D encoding result=40 12:56:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:05 Set channel filter=0.000000e+000 result=40 12:56:05 Config A/D Result=40 12:56:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:05 Get A/D filter: -9.255963e+061 result=40 12:56:05 Get A/D value=-858993460 result=40 12:56:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:05 Parameters OK 12:56:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:05 Set A/D data flow result=40 12:56:05 Set A/D channel type result=40 12:56:05 Set A/D encoding result=40 12:56:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:05 Set channel filter=0.000000e+000 result=40 12:56:05 Config A/D Result=40 12:56:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:05 Get A/D filter: -9.255963e+061 result=40 12:56:05 Get A/D value=-858993460 result=40 12:56:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:05 Aux= 12:56:05 Message to Camera, serial 51991 queued 12:56:13 Received message from Master: op=Shutter serial=52001 12:56:13 Shutter LASER close 12:56:14 Received message from Master: op=PointingHead serial=52005 12:56:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:56:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:56:14 Point started: ret=0 12:56:14 point_skyscan result=0 12:56:15 Check angles 12:56:15 SkyScan query 12:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 12:56:16 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 12:56:16 Check angles 12:56:16 SkyScan query 12:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.475<-20165 Statuses=0008 0009 12:56:16 Msec=750 True Az=112.995 Ze=-122.475 Az status=0008 Ze status=0009 12:56:16 Check angles 12:56:16 SkyScan query 12:56:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.49<-18766 Statuses=0008 0009 12:56:17 Msec=1500 True Az=112.995 Ze=-101.49 Az status=0008 Ze status=0009 12:56:17 Check angles 12:56:17 SkyScan query 12:56:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.115<-17341 Statuses=0008 0009 12:56:18 Msec=2250 True Az=112.995 Ze=-80.115 Az status=0008 Ze status=0009 12:56:18 Check angles 12:56:18 SkyScan query 12:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 12:56:19 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 12:56:19 Check angles 12:56:19 SkyScan query 12:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 12:56:19 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 12:56:19 Check angles 12:56:19 SkyScan query 12:56:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.25<-13150 Statuses=0008 0009 12:56:20 Msec=4500 True Az=112.995 Ze=-17.25 Az status=0008 Ze status=0009 12:56:20 Check angles 12:56:20 SkyScan query 12:56:21 SkyScan query done: ret=0 az=112.995<-7533 ze=3.735<-11751 Statuses=0008 0009 12:56:21 Msec=5250 True Az=112.995 Ze=3.735 Az status=0008 Ze status=0009 12:56:21 Check angles 12:56:21 SkyScan query 12:56:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:56:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:56:22 Message to Master queued w/err=0: serial=52005 error=0 12:56:27 Received message from Master: op=Filter serial=52006 12:56:27 Color wheel filter change from 0 to 0 12:56:27 FLIGetFilterPos err=0 currentPosition=0 12:56:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:27 Filter is already there-color wheel unchanged 12:56:27 Received message from Master: op=Shutter serial=52007 12:56:27 Shutter LASER close 12:56:27 Received message from Camera: op=State serial=52009 12:56:27 GetSingleValue result=40 Value=cccccccc 12:56:27 SkyScan query 12:56:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:56:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:27 Parameters OK 12:56:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:27 Set A/D data flow result=40 12:56:27 Set A/D channel type result=40 12:56:27 Set A/D encoding result=40 12:56:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:27 Set channel filter=0.000000e+000 result=40 12:56:27 Config A/D Result=40 12:56:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:27 Get A/D filter: -9.255963e+061 result=40 12:56:27 Get A/D value=-858993460 result=40 12:56:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:27 Parameters OK 12:56:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:27 Set A/D data flow result=40 12:56:27 Set A/D channel type result=40 12:56:27 Set A/D encoding result=40 12:56:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:27 Set channel filter=0.000000e+000 result=40 12:56:27 Config A/D Result=40 12:56:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:27 Get A/D filter: -9.255963e+061 result=40 12:56:27 Get A/D value=-858993460 result=40 12:56:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:27 Aux= 12:56:27 Message to Camera, serial 52009 queued 12:57:04 Received message from Master: op=PointingHead serial=52022 12:57:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:57:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:57:05 Point started: ret=0 12:57:05 point_skyscan result=0 12:57:05 Check angles 12:57:05 SkyScan query 12:57:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:57:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:57:06 Message to Master queued w/err=0: serial=52022 error=0 12:57:11 Received message from Master: op=Filter serial=52023 12:57:11 Color wheel filter change from 0 to 0 12:57:11 FLIGetFilterPos err=0 currentPosition=0 12:57:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:11 Filter is already there-color wheel unchanged 12:57:11 Received message from Master: op=Shutter serial=52024 12:57:11 Shutter LASER close 12:57:11 Received message from Camera: op=State serial=52026 12:57:11 GetSingleValue result=40 Value=cccccccc 12:57:11 SkyScan query 12:57:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:57:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:12 Parameters OK 12:57:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:12 Set A/D data flow result=40 12:57:12 Set A/D channel type result=40 12:57:12 Set A/D encoding result=40 12:57:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:12 Set channel filter=0.000000e+000 result=40 12:57:12 Config A/D Result=40 12:57:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:12 Get A/D filter: -9.255963e+061 result=40 12:57:12 Get A/D value=-858993460 result=40 12:57:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:12 Parameters OK 12:57:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:12 Set A/D data flow result=40 12:57:12 Set A/D channel type result=40 12:57:12 Set A/D encoding result=40 12:57:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:12 Set channel filter=0.000000e+000 result=40 12:57:12 Config A/D Result=40 12:57:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:12 Get A/D filter: -9.255963e+061 result=40 12:57:12 Get A/D value=-858993460 result=40 12:57:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:12 Aux= 12:57:12 Message to Camera, serial 52026 queued 12:57:49 Received message from Master: op=PointingHead serial=52039 12:57:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:57:49 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:57:49 Point started: ret=0 12:57:49 point_skyscan result=0 12:57:50 Check angles 12:57:50 SkyScan query 12:57:50 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 12:57:50 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 12:57:50 Check angles 12:57:50 SkyScan query 12:57:51 SkyScan query done: ret=0 az=154.005<-10267 ze=-6.495<-12433 Statuses=0009 0008 12:57:51 Msec=750 True Az=154.005 Ze=-6.495 Az status=0009 Ze status=0008 12:57:51 Check angles 12:57:51 SkyScan query 12:57:52 SkyScan query done: ret=0 az=171.42<-11428 ze=-6.495<-12433 Statuses=0009 0008 12:57:52 Msec=1500 True Az=171.42 Ze=-6.495 Az status=0009 Ze status=0008 12:57:52 Check angles 12:57:52 SkyScan query 12:57:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:57:53 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:57:53 Message to Master queued w/err=0: serial=52039 error=0 12:57:58 Received message from Master: op=Filter serial=52040 12:57:58 Color wheel filter change from 0 to 0 12:57:58 FLIGetFilterPos err=0 currentPosition=0 12:57:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:58 Filter is already there-color wheel unchanged 12:57:58 Received message from Master: op=Shutter serial=52041 12:57:58 Shutter LASER close 12:57:58 Received message from Camera: op=State serial=52043 12:57:58 GetSingleValue result=40 Value=cccccccc 12:57:58 SkyScan query 12:57:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:57:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:58 Parameters OK 12:57:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:58 Set A/D data flow result=40 12:57:58 Set A/D channel type result=40 12:57:58 Set A/D encoding result=40 12:57:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:58 Set channel filter=0.000000e+000 result=40 12:57:58 Config A/D Result=40 12:57:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:58 Get A/D filter: -9.255963e+061 result=40 12:57:58 Get A/D value=-858993460 result=40 12:57:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:58 Parameters OK 12:57:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:58 Set A/D data flow result=40 12:57:58 Set A/D channel type result=40 12:57:58 Set A/D encoding result=40 12:57:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:58 Set channel filter=0.000000e+000 result=40 12:57:58 Config A/D Result=40 12:57:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:58 Get A/D filter: -9.255963e+061 result=40 12:57:58 Get A/D value=-858993460 result=40 12:57:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:58 Aux= 12:57:58 Message to Camera, serial 52043 queued 12:58:35 Received message from Master: op=PointingHead serial=52056 12:58:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:58:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:58:35 Point started: ret=0 12:58:35 point_skyscan result=0 12:58:36 Check angles 12:58:36 SkyScan query 12:58:37 SkyScan query done: ret=0 az=153.165<-10211 ze=6.51<-11566 Statuses=0009 0008 12:58:37 Msec=0 True Az=153.165 Ze=6.51 Az status=0009 Ze status=0008 12:58:37 Check angles 12:58:37 SkyScan query 12:58:38 SkyScan query done: ret=0 az=135.615<-9041 ze=6.495<-11567 Statuses=0009 0008 12:58:38 Msec=750 True Az=135.615 Ze=6.495 Az status=0009 Ze status=0008 12:58:38 Check angles 12:58:38 SkyScan query 12:58:38 SkyScan query done: ret=0 az=118.185<-7879 ze=6.495<-11567 Statuses=0009 0008 12:58:38 Msec=1500 True Az=118.185 Ze=6.495 Az status=0009 Ze status=0008 12:58:38 Check angles 12:58:38 SkyScan query 12:58:39 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 12:58:39 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 12:58:39 Message to Master queued w/err=0: serial=52056 error=0 12:58:44 Received message from Master: op=Filter serial=52057 12:58:44 Color wheel filter change from 0 to 0 12:58:44 FLIGetFilterPos err=0 currentPosition=0 12:58:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:44 Filter is already there-color wheel unchanged 12:58:44 Received message from Master: op=Shutter serial=52058 12:58:44 Shutter LASER close 12:58:44 Received message from Camera: op=State serial=52060 12:58:44 GetSingleValue result=40 Value=cccccccc 12:58:44 SkyScan query 12:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:58:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:45 Parameters OK 12:58:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:45 Set A/D data flow result=40 12:58:45 Set A/D channel type result=40 12:58:45 Set A/D encoding result=40 12:58:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:45 Set channel filter=0.000000e+000 result=40 12:58:45 Config A/D Result=40 12:58:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:45 Get A/D filter: -9.255963e+061 result=40 12:58:45 Get A/D value=-858993460 result=40 12:58:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:45 Parameters OK 12:58:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:45 Set A/D data flow result=40 12:58:45 Set A/D channel type result=40 12:58:45 Set A/D encoding result=40 12:58:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:45 Set channel filter=0.000000e+000 result=40 12:58:45 Config A/D Result=40 12:58:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:45 Get A/D filter: -9.255963e+061 result=40 12:58:45 Get A/D value=-858993460 result=40 12:58:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:45 Aux= 12:58:45 Message to Camera, serial 52060 queued 12:59:22 Received message from Master: op=PointingHead serial=52073 12:59:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:59:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:59:22 Point started: ret=0 12:59:22 point_skyscan result=0 12:59:23 Check angles 12:59:23 SkyScan query 12:59:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 12:59:23 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 12:59:24 Check angles 12:59:24 SkyScan query 12:59:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.98<-14932 Statuses=0008 0009 12:59:24 Msec=750 True Az=112.995 Ze=-43.98 Az status=0008 Ze status=0009 12:59:24 Check angles 12:59:24 SkyScan query 12:59:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 12:59:25 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 12:59:25 Check angles 12:59:25 SkyScan query 12:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 12:59:26 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 12:59:26 Check angles 12:59:26 SkyScan query 12:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.265<-19151 Statuses=0008 0009 12:59:26 Msec=3000 True Az=112.995 Ze=-107.265 Az status=0008 Ze status=0009 12:59:27 Check angles 12:59:27 SkyScan query 12:59:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 12:59:27 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 12:59:27 Check angles 12:59:27 SkyScan query 12:59:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.015<-22001 Statuses=0008 0009 12:59:28 Msec=4500 True Az=112.995 Ze=-150.015 Az status=0008 Ze status=0009 12:59:28 Check angles 12:59:28 SkyScan query 12:59:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.88<-23392 Statuses=0008 0009 12:59:29 Msec=5250 True Az=112.995 Ze=-170.88 Az status=0008 Ze status=0009 12:59:29 Check angles 12:59:29 SkyScan query 12:59:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:59:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:59:29 Message to Master queued w/err=0: serial=52073 error=0 12:59:34 Received message from Master: op=Filter serial=52074 12:59:34 Color wheel filter change from 0 to 0 12:59:34 FLIGetFilterPos err=0 currentPosition=0 12:59:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:34 Filter is already there-color wheel unchanged 12:59:35 Received message from Master: op=Shutter serial=52075 12:59:35 Shutter LASER open 12:59:35 Received message from Camera: op=State serial=52077 12:59:35 GetSingleValue result=40 Value=cccccccc 12:59:35 SkyScan query 12:59:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:59:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:35 Parameters OK 12:59:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:35 Set A/D data flow result=40 12:59:35 Set A/D channel type result=40 12:59:35 Set A/D encoding result=40 12:59:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:35 Set channel filter=0.000000e+000 result=40 12:59:35 Config A/D Result=40 12:59:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:35 Get A/D filter: -9.255963e+061 result=40 12:59:35 Get A/D value=-858993460 result=40 12:59:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:35 Parameters OK 12:59:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:35 Set A/D data flow result=40 12:59:35 Set A/D channel type result=40 12:59:35 Set A/D encoding result=40 12:59:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:35 Set channel filter=0.000000e+000 result=40 12:59:35 Config A/D Result=40 12:59:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:35 Get A/D filter: -9.255963e+061 result=40 12:59:35 Get A/D value=-858993460 result=40 12:59:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:35 Aux= 12:59:35 Message to Camera, serial 52077 queued 12:59:44 Received message from Master: op=Shutter serial=52087 12:59:44 Shutter LASER close 12:59:44 Received message from Master: op=PointingHead serial=52091 12:59:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:59:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:59:45 Point started: ret=0 12:59:45 point_skyscan result=0 12:59:45 Check angles 12:59:45 SkyScan query 12:59:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.905<-21527 Statuses=0008 0009 12:59:46 Msec=0 True Az=112.995 Ze=-142.905 Az status=0008 Ze status=0009 12:59:46 Check angles 12:59:46 SkyScan query 12:59:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 12:59:47 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 12:59:47 Check angles 12:59:47 SkyScan query 12:59:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 12:59:47 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 12:59:48 Check angles 12:59:48 SkyScan query 12:59:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 12:59:48 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 12:59:48 Check angles 12:59:48 SkyScan query 12:59:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.635<-15909 Statuses=0008 0009 12:59:49 Msec=3000 True Az=112.995 Ze=-58.635 Az status=0008 Ze status=0009 12:59:49 Check angles 12:59:49 SkyScan query 12:59:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.245<-14483 Statuses=0008 0009 12:59:50 Msec=3750 True Az=112.995 Ze=-37.245 Az status=0008 Ze status=0009 12:59:50 Check angles 12:59:50 SkyScan query 12:59:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.825<-13055 Statuses=0008 0009 12:59:50 Msec=4500 True Az=112.995 Ze=-15.825 Az status=0008 Ze status=0009 12:59:51 Check angles 12:59:51 SkyScan query 12:59:51 SkyScan query done: ret=0 az=112.995<-7533 ze=4.875<-11675 Statuses=0008 0009 12:59:51 Msec=5250 True Az=112.995 Ze=4.875 Az status=0008 Ze status=0009 12:59:51 Check angles 12:59:51 SkyScan query 12:59:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:59:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:59:52 Message to Master queued w/err=0: serial=52091 error=0 12:59:57 Received message from Master: op=Filter serial=52092 12:59:57 Color wheel filter change from 0 to 0 12:59:57 FLIGetFilterPos err=0 currentPosition=0 12:59:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:57 Filter is already there-color wheel unchanged 12:59:57 Received message from Master: op=Shutter serial=52093 12:59:57 Shutter LASER close 12:59:57 Received message from Camera: op=State serial=52095 12:59:57 GetSingleValue result=40 Value=cccccccc 12:59:57 SkyScan query 12:59:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:59:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:58 Parameters OK 12:59:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:58 Set A/D data flow result=40 12:59:58 Set A/D channel type result=40 12:59:58 Set A/D encoding result=40 12:59:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:58 Set channel filter=0.000000e+000 result=40 12:59:58 Config A/D Result=40 12:59:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:58 Get A/D filter: -9.255963e+061 result=40 12:59:58 Get A/D value=-858993460 result=40 12:59:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:58 Parameters OK 12:59:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:58 Set A/D data flow result=40 12:59:58 Set A/D channel type result=40 12:59:58 Set A/D encoding result=40 12:59:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:58 Set channel filter=0.000000e+000 result=40 12:59:58 Config A/D Result=40 12:59:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:58 Get A/D filter: -9.255963e+061 result=40 12:59:58 Get A/D value=-858993460 result=40 12:59:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:58 Aux= 12:59:58 Message to Camera, serial 52095 queued 13:00:34 Received message from Master: op=PointingHead serial=52107 13:00:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:00:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:00:34 Point started: ret=0 13:00:34 point_skyscan result=0 13:00:35 Check angles 13:00:35 SkyScan query 13:00:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:00:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:00:35 Message to Master queued w/err=0: serial=52107 error=0 13:00:40 Received message from Master: op=Filter serial=52108 13:00:40 Color wheel filter change from 0 to 0 13:00:40 FLIGetFilterPos err=0 currentPosition=0 13:00:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:40 Filter is already there-color wheel unchanged 13:00:41 Received message from Master: op=Shutter serial=52109 13:00:41 Shutter LASER close 13:00:41 Received message from Camera: op=State serial=52111 13:00:41 GetSingleValue result=40 Value=cccccccc 13:00:41 SkyScan query 13:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:00:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:41 Parameters OK 13:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:41 Set A/D data flow result=40 13:00:41 Set A/D channel type result=40 13:00:41 Set A/D encoding result=40 13:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:41 Set channel filter=0.000000e+000 result=40 13:00:41 Config A/D Result=40 13:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:41 Get A/D filter: -9.255963e+061 result=40 13:00:41 Get A/D value=-858993460 result=40 13:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:41 Parameters OK 13:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:41 Set A/D data flow result=40 13:00:41 Set A/D channel type result=40 13:00:41 Set A/D encoding result=40 13:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:41 Set channel filter=0.000000e+000 result=40 13:00:41 Config A/D Result=40 13:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:41 Get A/D filter: -9.255963e+061 result=40 13:00:41 Get A/D value=-858993460 result=40 13:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:41 Aux= 13:00:41 Message to Camera, serial 52111 queued 13:01:18 Received message from Master: op=PointingHead serial=52124 13:01:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:01:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:01:18 Point started: ret=0 13:01:18 point_skyscan result=0 13:01:19 Check angles 13:01:19 SkyScan query 13:01:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:01:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:01:20 Message to Master queued w/err=0: serial=52124 error=0 13:01:25 Received message from Master: op=Filter serial=52125 13:01:25 Color wheel filter change from 0 to 0 13:01:25 FLIGetFilterPos err=0 currentPosition=0 13:01:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:25 Filter is already there-color wheel unchanged 13:01:25 Received message from Master: op=Shutter serial=52126 13:01:25 Shutter LASER close 13:01:25 Received message from Camera: op=State serial=52128 13:01:25 GetSingleValue result=40 Value=cccccccc 13:01:25 SkyScan query 13:01:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:01:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:25 Parameters OK 13:01:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:25 Set A/D data flow result=40 13:01:25 Set A/D channel type result=40 13:01:25 Set A/D encoding result=40 13:01:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:25 Set channel filter=0.000000e+000 result=40 13:01:25 Config A/D Result=40 13:01:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:25 Get A/D filter: -9.255963e+061 result=40 13:01:25 Get A/D value=-858993460 result=40 13:01:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:25 Parameters OK 13:01:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:25 Set A/D data flow result=40 13:01:25 Set A/D channel type result=40 13:01:25 Set A/D encoding result=40 13:01:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:25 Set channel filter=0.000000e+000 result=40 13:01:25 Config A/D Result=40 13:01:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:25 Get A/D filter: -9.255963e+061 result=40 13:01:25 Get A/D value=-858993460 result=40 13:01:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:25 Aux= 13:01:25 Message to Camera, serial 52128 queued 13:02:02 Received message from Master: op=PointingHead serial=52141 13:02:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:02:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:02:03 Point started: ret=0 13:02:03 point_skyscan result=0 13:02:03 Check angles 13:02:03 SkyScan query 13:02:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:02:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:02:04 Message to Master queued w/err=0: serial=52141 error=0 13:02:09 Received message from Master: op=Filter serial=52142 13:02:09 Color wheel filter change from 0 to 0 13:02:09 FLIGetFilterPos err=0 currentPosition=0 13:02:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:09 Filter is already there-color wheel unchanged 13:02:09 Received message from Master: op=Shutter serial=52143 13:02:09 Shutter LASER close 13:02:09 Received message from Camera: op=State serial=52145 13:02:09 GetSingleValue result=40 Value=cccccccc 13:02:09 SkyScan query 13:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:02:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:10 Parameters OK 13:02:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:10 Set A/D data flow result=40 13:02:10 Set A/D channel type result=40 13:02:10 Set A/D encoding result=40 13:02:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:10 Set channel filter=0.000000e+000 result=40 13:02:10 Config A/D Result=40 13:02:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:10 Get A/D filter: -9.255963e+061 result=40 13:02:10 Get A/D value=-858993460 result=40 13:02:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:10 Parameters OK 13:02:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:10 Set A/D data flow result=40 13:02:10 Set A/D channel type result=40 13:02:10 Set A/D encoding result=40 13:02:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:10 Set channel filter=0.000000e+000 result=40 13:02:10 Config A/D Result=40 13:02:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:10 Get A/D filter: -9.255963e+061 result=40 13:02:10 Get A/D value=-858993460 result=40 13:02:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:10 Aux= 13:02:10 Message to Camera, serial 52145 queued 13:02:47 Received message from Master: op=PointingHead serial=52158 13:02:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:02:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:02:47 Point started: ret=0 13:02:47 point_skyscan result=0 13:02:48 Check angles 13:02:48 SkyScan query 13:02:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 13:02:48 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 13:02:48 Check angles 13:02:48 SkyScan query 13:02:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 13:02:49 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 13:02:49 Check angles 13:02:49 SkyScan query 13:02:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 13:02:50 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 13:02:50 Check angles 13:02:50 SkyScan query 13:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.835<-17789 Statuses=0008 0009 13:02:51 Msec=2250 True Az=112.995 Ze=-86.835 Az status=0008 Ze status=0009 13:02:51 Check angles 13:02:51 SkyScan query 13:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 13:02:51 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 13:02:51 Check angles 13:02:51 SkyScan query 13:02:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.7<-20580 Statuses=0008 0009 13:02:52 Msec=3750 True Az=112.995 Ze=-128.7 Az status=0008 Ze status=0009 13:02:52 Check angles 13:02:52 SkyScan query 13:02:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 13:02:53 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 13:02:53 Check angles 13:02:53 SkyScan query 13:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 13:02:54 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 13:02:54 Check angles 13:02:54 SkyScan query 13:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:02:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:02:54 Message to Master queued w/err=0: serial=52158 error=0 13:02:59 Received message from Master: op=Filter serial=52159 13:02:59 Color wheel filter change from 0 to 0 13:02:59 FLIGetFilterPos err=0 currentPosition=0 13:02:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:59 Filter is already there-color wheel unchanged 13:02:59 Received message from Master: op=Shutter serial=52160 13:02:59 Shutter LASER open 13:03:00 Received message from Camera: op=State serial=52162 13:03:00 GetSingleValue result=40 Value=cccccccc 13:03:00 SkyScan query 13:03:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:03:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:00 Parameters OK 13:03:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:00 Set A/D data flow result=40 13:03:00 Set A/D channel type result=40 13:03:00 Set A/D encoding result=40 13:03:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:00 Set channel filter=0.000000e+000 result=40 13:03:00 Config A/D Result=40 13:03:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:00 Get A/D filter: -9.255963e+061 result=40 13:03:00 Get A/D value=-858993460 result=40 13:03:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:00 Parameters OK 13:03:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:00 Set A/D data flow result=40 13:03:00 Set A/D channel type result=40 13:03:00 Set A/D encoding result=40 13:03:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:00 Set channel filter=0.000000e+000 result=40 13:03:00 Config A/D Result=40 13:03:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:00 Get A/D filter: -9.255963e+061 result=40 13:03:00 Get A/D value=-858993460 result=40 13:03:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:00 Aux= 13:03:00 Message to Camera, serial 52162 queued 13:03:09 Received message from Master: op=Shutter serial=52172 13:03:09 Shutter LASER close 13:03:09 Received message from Master: op=PointingHead serial=52176 13:03:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:03:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:03:10 Point started: ret=0 13:03:10 point_skyscan result=0 13:03:10 Check angles 13:03:10 SkyScan query 13:03:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.905<-21527 Statuses=0008 0009 13:03:11 Msec=0 True Az=112.995 Ze=-142.905 Az status=0008 Ze status=0009 13:03:11 Check angles 13:03:11 SkyScan query 13:03:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 13:03:12 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 13:03:12 Check angles 13:03:12 SkyScan query 13:03:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 13:03:12 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 13:03:13 Check angles 13:03:13 SkyScan query 13:03:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 13:03:13 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 13:03:13 Check angles 13:03:13 SkyScan query 13:03:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.115<-15941 Statuses=0008 0009 13:03:14 Msec=3000 True Az=112.995 Ze=-59.115 Az status=0008 Ze status=0009 13:03:14 Check angles 13:03:14 SkyScan query 13:03:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.13<-14542 Statuses=0008 0009 13:03:15 Msec=3750 True Az=112.995 Ze=-38.13 Az status=0008 Ze status=0009 13:03:15 Check angles 13:03:15 SkyScan query 13:03:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 13:03:15 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 13:03:16 Check angles 13:03:16 SkyScan query 13:03:16 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 13:03:16 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 13:03:16 Check angles 13:03:16 SkyScan query 13:03:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:03:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:03:17 Message to Master queued w/err=0: serial=52176 error=0 13:03:22 Received message from Master: op=Filter serial=52177 13:03:22 Color wheel filter change from 0 to 0 13:03:22 FLIGetFilterPos err=0 currentPosition=0 13:03:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:22 Filter is already there-color wheel unchanged 13:03:22 Received message from Master: op=Shutter serial=52178 13:03:22 Shutter LASER close 13:03:22 Received message from Camera: op=State serial=52180 13:03:22 GetSingleValue result=40 Value=cccccccc 13:03:22 SkyScan query 13:03:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:03:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:23 Parameters OK 13:03:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:23 Set A/D data flow result=40 13:03:23 Set A/D channel type result=40 13:03:23 Set A/D encoding result=40 13:03:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:23 Set channel filter=0.000000e+000 result=40 13:03:23 Config A/D Result=40 13:03:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:23 Get A/D filter: -9.255963e+061 result=40 13:03:23 Get A/D value=-858993460 result=40 13:03:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:23 Parameters OK 13:03:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:23 Set A/D data flow result=40 13:03:23 Set A/D channel type result=40 13:03:23 Set A/D encoding result=40 13:03:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:23 Set channel filter=0.000000e+000 result=40 13:03:23 Config A/D Result=40 13:03:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:23 Get A/D filter: -9.255963e+061 result=40 13:03:23 Get A/D value=-858993460 result=40 13:03:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:23 Aux= 13:03:23 Message to Camera, serial 52180 queued 13:03:38 Received message from Master: op=Identify serial=52181 [UTC 2019-3-1 13:03:50] 13:04:00 Received message from Master: op=PointingHead serial=52196 13:04:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:04:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:04:00 Point started: ret=0 13:04:00 point_skyscan result=0 13:04:01 Check angles 13:04:01 SkyScan query 13:04:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:04:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:04:01 Message to Master queued w/err=0: serial=52196 error=0 13:04:06 Received message from Master: op=Filter serial=52197 13:04:06 Color wheel filter change from 0 to 0 13:04:06 FLIGetFilterPos err=0 currentPosition=0 13:04:06 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:06 Filter is already there-color wheel unchanged 13:04:07 Received message from Master: op=Shutter serial=52198 13:04:07 Shutter LASER close 13:04:07 Received message from Camera: op=State serial=52200 13:04:07 GetSingleValue result=40 Value=cccccccc 13:04:07 SkyScan query 13:04:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:04:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:07 Parameters OK 13:04:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:07 Set A/D data flow result=40 13:04:07 Set A/D channel type result=40 13:04:07 Set A/D encoding result=40 13:04:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:07 Set channel filter=0.000000e+000 result=40 13:04:07 Config A/D Result=40 13:04:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:07 Get A/D filter: -9.255963e+061 result=40 13:04:07 Get A/D value=-858993460 result=40 13:04:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:07 Parameters OK 13:04:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:07 Set A/D data flow result=40 13:04:07 Set A/D channel type result=40 13:04:07 Set A/D encoding result=40 13:04:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:07 Set channel filter=0.000000e+000 result=40 13:04:07 Config A/D Result=40 13:04:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:07 Get A/D filter: -9.255963e+061 result=40 13:04:07 Get A/D value=-858993460 result=40 13:04:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:07 Aux= 13:04:07 Message to Camera, serial 52200 queued 13:04:44 Received message from Master: op=PointingHead serial=52213 13:04:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:04:44 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:04:44 Point started: ret=0 13:04:44 point_skyscan result=0 13:04:45 Check angles 13:04:45 SkyScan query 13:04:46 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 13:04:46 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 13:04:46 Check angles 13:04:46 SkyScan query 13:04:46 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 13:04:46 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 13:04:47 Check angles 13:04:47 SkyScan query 13:04:47 SkyScan query done: ret=0 az=170.925<-11395 ze=-6.495<-12433 Statuses=0009 0008 13:04:47 Msec=1500 True Az=170.925 Ze=-6.495 Az status=0009 Ze status=0008 13:04:47 Check angles 13:04:47 SkyScan query 13:04:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:04:48 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:04:48 Message to Master queued w/err=0: serial=52213 error=0 13:04:53 Received message from Master: op=Filter serial=52214 13:04:53 Color wheel filter change from 0 to 0 13:04:53 FLIGetFilterPos err=0 currentPosition=0 13:04:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:53 Filter is already there-color wheel unchanged 13:04:53 Received message from Master: op=Shutter serial=52215 13:04:53 Shutter LASER close 13:04:53 Received message from Camera: op=State serial=52217 13:04:53 GetSingleValue result=40 Value=cccccccc 13:04:53 SkyScan query 13:04:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:04:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:54 Parameters OK 13:04:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:54 Set A/D data flow result=40 13:04:54 Set A/D channel type result=40 13:04:54 Set A/D encoding result=40 13:04:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:54 Set channel filter=0.000000e+000 result=40 13:04:54 Config A/D Result=40 13:04:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:54 Get A/D filter: -9.255963e+061 result=40 13:04:54 Get A/D value=-858993460 result=40 13:04:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:54 Parameters OK 13:04:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:54 Set A/D data flow result=40 13:04:54 Set A/D channel type result=40 13:04:54 Set A/D encoding result=40 13:04:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:54 Set channel filter=0.000000e+000 result=40 13:04:54 Config A/D Result=40 13:04:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:54 Get A/D filter: -9.255963e+061 result=40 13:04:54 Get A/D value=-858993460 result=40 13:04:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:54 Aux= 13:04:54 Message to Camera, serial 52217 queued 13:05:31 Received message from Master: op=PointingHead serial=52230 13:05:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:05:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:05:31 Point started: ret=0 13:05:31 point_skyscan result=0 13:05:32 Check angles 13:05:32 SkyScan query 13:05:32 SkyScan query done: ret=0 az=152.82<-10188 ze=6.51<-11566 Statuses=0009 0008 13:05:32 Msec=0 True Az=152.82 Ze=6.51 Az status=0009 Ze status=0008 13:05:32 Check angles 13:05:32 SkyScan query 13:05:33 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 13:05:33 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 13:05:33 Check angles 13:05:33 SkyScan query 13:05:34 SkyScan query done: ret=0 az=117.9<-7860 ze=6.495<-11567 Statuses=0009 0008 13:05:34 Msec=1500 True Az=117.9 Ze=6.495 Az status=0009 Ze status=0008 13:05:34 Check angles 13:05:34 SkyScan query 13:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:05:35 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:05:35 Message to Master queued w/err=0: serial=52230 error=0 13:05:40 Received message from Master: op=Filter serial=52231 13:05:40 Color wheel filter change from 0 to 0 13:05:40 FLIGetFilterPos err=0 currentPosition=0 13:05:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:40 Filter is already there-color wheel unchanged 13:05:40 Received message from Master: op=Shutter serial=52232 13:05:40 Shutter LASER close 13:05:40 Received message from Camera: op=State serial=52234 13:05:40 GetSingleValue result=40 Value=cccccccc 13:05:40 SkyScan query 13:05:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:05:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:40 Parameters OK 13:05:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:40 Set A/D data flow result=40 13:05:40 Set A/D channel type result=40 13:05:40 Set A/D encoding result=40 13:05:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:40 Set channel filter=0.000000e+000 result=40 13:05:40 Config A/D Result=40 13:05:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:40 Get A/D filter: -9.255963e+061 result=40 13:05:40 Get A/D value=-858993460 result=40 13:05:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:40 Parameters OK 13:05:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:40 Set A/D data flow result=40 13:05:40 Set A/D channel type result=40 13:05:40 Set A/D encoding result=40 13:05:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:40 Set channel filter=0.000000e+000 result=40 13:05:40 Config A/D Result=40 13:05:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:40 Get A/D filter: -9.255963e+061 result=40 13:05:40 Get A/D value=-858993460 result=40 13:05:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:40 Aux= 13:05:40 Message to Camera, serial 52234 queued 13:06:17 Received message from Master: op=PointingHead serial=52247 13:06:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:06:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:06:18 Point started: ret=0 13:06:18 point_skyscan result=0 13:06:18 Check angles 13:06:18 SkyScan query 13:06:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 13:06:19 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 13:06:19 Check angles 13:06:19 SkyScan query 13:06:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.15<-15010 Statuses=0008 0009 13:06:20 Msec=750 True Az=112.995 Ze=-45.15 Az status=0008 Ze status=0009 13:06:20 Check angles 13:06:20 SkyScan query 13:06:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.54<-16436 Statuses=0008 0009 13:06:20 Msec=1500 True Az=112.995 Ze=-66.54 Az status=0008 Ze status=0009 13:06:21 Check angles 13:06:21 SkyScan query 13:06:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.495<-17833 Statuses=0008 0009 13:06:21 Msec=2250 True Az=112.995 Ze=-87.495 Az status=0008 Ze status=0009 13:06:21 Check angles 13:06:21 SkyScan query 13:06:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.87<-19258 Statuses=0008 0009 13:06:22 Msec=3000 True Az=112.995 Ze=-108.87 Az status=0008 Ze status=0009 13:06:22 Check angles 13:06:22 SkyScan query 13:06:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-130.29<-20686 Statuses=0008 0009 13:06:23 Msec=3750 True Az=112.995 Ze=-130.29 Az status=0008 Ze status=0009 13:06:23 Check angles 13:06:23 SkyScan query 13:06:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.215<-22081 Statuses=0008 0009 13:06:23 Msec=4500 True Az=112.995 Ze=-151.215 Az status=0008 Ze status=0009 13:06:24 Check angles 13:06:24 SkyScan query 13:06:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.765<-23451 Statuses=0008 0009 13:06:24 Msec=5250 True Az=112.995 Ze=-171.765 Az status=0008 Ze status=0009 13:06:24 Check angles 13:06:24 SkyScan query 13:06:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:06:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:06:25 Message to Master queued w/err=0: serial=52247 error=0 13:06:30 Received message from Master: op=Filter serial=52248 13:06:30 Color wheel filter change from 0 to 0 13:06:30 FLIGetFilterPos err=0 currentPosition=0 13:06:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:30 Filter is already there-color wheel unchanged 13:06:30 Received message from Master: op=Shutter serial=52249 13:06:30 Shutter LASER open 13:06:30 Received message from Camera: op=State serial=52251 13:06:30 GetSingleValue result=40 Value=cccccccc 13:06:30 SkyScan query 13:06:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:06:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:31 Parameters OK 13:06:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:31 Set A/D data flow result=40 13:06:31 Set A/D channel type result=40 13:06:31 Set A/D encoding result=40 13:06:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:31 Set channel filter=0.000000e+000 result=40 13:06:31 Config A/D Result=40 13:06:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:31 Get A/D filter: -9.255963e+061 result=40 13:06:31 Get A/D value=-858993460 result=40 13:06:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:31 Parameters OK 13:06:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:31 Set A/D data flow result=40 13:06:31 Set A/D channel type result=40 13:06:31 Set A/D encoding result=40 13:06:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:31 Set channel filter=0.000000e+000 result=40 13:06:31 Config A/D Result=40 13:06:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:31 Get A/D filter: -9.255963e+061 result=40 13:06:31 Get A/D value=-858993460 result=40 13:06:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:31 Aux= 13:06:31 Message to Camera, serial 52251 queued 13:06:39 Received message from Master: op=Shutter serial=52261 13:06:39 Shutter LASER close 13:06:40 Received message from Master: op=PointingHead serial=52265 13:06:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:06:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:06:40 Point started: ret=0 13:06:40 point_skyscan result=0 13:06:41 Check angles 13:06:41 SkyScan query 13:06:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 13:06:41 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 13:06:42 Check angles 13:06:42 SkyScan query 13:06:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 13:06:42 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 13:06:42 Check angles 13:06:42 SkyScan query 13:06:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 13:06:43 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 13:06:43 Check angles 13:06:43 SkyScan query 13:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 13:06:44 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 13:06:44 Check angles 13:06:44 SkyScan query 13:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 13:06:44 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 13:06:45 Check angles 13:06:45 SkyScan query 13:06:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.53<-14502 Statuses=0008 0009 13:06:45 Msec=3750 True Az=112.995 Ze=-37.53 Az status=0008 Ze status=0009 13:06:45 Check angles 13:06:45 SkyScan query 13:06:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.545<-13103 Statuses=0008 0009 13:06:46 Msec=4500 True Az=112.995 Ze=-16.545 Az status=0008 Ze status=0009 13:06:46 Check angles 13:06:46 SkyScan query 13:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 13:06:47 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 13:06:47 Check angles 13:06:47 SkyScan query 13:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:06:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:06:47 Message to Master queued w/err=0: serial=52265 error=0 13:06:52 Received message from Master: op=Filter serial=52266 13:06:52 Color wheel filter change from 0 to 0 13:06:52 FLIGetFilterPos err=0 currentPosition=0 13:06:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:52 Filter is already there-color wheel unchanged 13:06:53 Received message from Master: op=Shutter serial=52267 13:06:53 Shutter LASER close 13:06:53 Received message from Camera: op=State serial=52269 13:06:53 GetSingleValue result=40 Value=cccccccc 13:06:53 SkyScan query 13:06:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:06:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:53 Parameters OK 13:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:53 Set A/D data flow result=40 13:06:53 Set A/D channel type result=40 13:06:53 Set A/D encoding result=40 13:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:53 Set channel filter=0.000000e+000 result=40 13:06:53 Config A/D Result=40 13:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:53 Get A/D filter: -9.255963e+061 result=40 13:06:53 Get A/D value=-858993460 result=40 13:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:53 Parameters OK 13:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:53 Set A/D data flow result=40 13:06:53 Set A/D channel type result=40 13:06:53 Set A/D encoding result=40 13:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:53 Set channel filter=0.000000e+000 result=40 13:06:53 Config A/D Result=40 13:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:53 Get A/D filter: -9.255963e+061 result=40 13:06:53 Get A/D value=-858993460 result=40 13:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:53 Aux= 13:06:53 Message to Camera, serial 52269 queued 13:07:30 Received message from Master: op=PointingHead serial=52282 13:07:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:07:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:07:31 Point started: ret=0 13:07:31 point_skyscan result=0 13:07:31 Check angles 13:07:31 SkyScan query 13:07:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:07:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:07:32 Message to Master queued w/err=0: serial=52282 error=0 13:07:37 Received message from Master: op=Filter serial=52283 13:07:37 Color wheel filter change from 0 to 0 13:07:37 FLIGetFilterPos err=0 currentPosition=0 13:07:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:37 Filter is already there-color wheel unchanged 13:07:37 Received message from Master: op=Shutter serial=52284 13:07:37 Shutter LASER close 13:07:37 Received message from Camera: op=State serial=52286 13:07:37 GetSingleValue result=40 Value=cccccccc 13:07:37 SkyScan query 13:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:07:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:38 Parameters OK 13:07:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:38 Set A/D data flow result=40 13:07:38 Set A/D channel type result=40 13:07:38 Set A/D encoding result=40 13:07:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:38 Set channel filter=0.000000e+000 result=40 13:07:38 Config A/D Result=40 13:07:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:38 Get A/D filter: -9.255963e+061 result=40 13:07:38 Get A/D value=-858993460 result=40 13:07:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:38 Parameters OK 13:07:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:38 Set A/D data flow result=40 13:07:38 Set A/D channel type result=40 13:07:38 Set A/D encoding result=40 13:07:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:38 Set channel filter=0.000000e+000 result=40 13:07:38 Config A/D Result=40 13:07:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:38 Get A/D filter: -9.255963e+061 result=40 13:07:38 Get A/D value=-858993460 result=40 13:07:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:38 Aux= 13:07:38 Message to Camera, serial 52286 queued 13:08:14 Received message from Master: op=PointingHead serial=52299 13:08:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:08:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:08:15 Point started: ret=0 13:08:15 point_skyscan result=0 13:08:16 Check angles 13:08:16 SkyScan query 13:08:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:08:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:08:16 Message to Master queued w/err=0: serial=52299 error=0 13:08:21 Received message from Master: op=Filter serial=52300 13:08:21 Color wheel filter change from 0 to 0 13:08:21 FLIGetFilterPos err=0 currentPosition=0 13:08:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:21 Filter is already there-color wheel unchanged 13:08:21 Received message from Master: op=Shutter serial=52301 13:08:21 Shutter LASER close 13:08:21 Received message from Camera: op=State serial=52303 13:08:21 GetSingleValue result=40 Value=cccccccc 13:08:21 SkyScan query 13:08:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:08:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:22 Parameters OK 13:08:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:22 Set A/D data flow result=40 13:08:22 Set A/D channel type result=40 13:08:22 Set A/D encoding result=40 13:08:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:22 Set channel filter=0.000000e+000 result=40 13:08:22 Config A/D Result=40 13:08:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:22 Get A/D filter: -9.255963e+061 result=40 13:08:22 Get A/D value=-858993460 result=40 13:08:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:22 Parameters OK 13:08:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:22 Set A/D data flow result=40 13:08:22 Set A/D channel type result=40 13:08:22 Set A/D encoding result=40 13:08:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:22 Set channel filter=0.000000e+000 result=40 13:08:22 Config A/D Result=40 13:08:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:22 Get A/D filter: -9.255963e+061 result=40 13:08:22 Get A/D value=-858993460 result=40 13:08:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:22 Aux= 13:08:22 Message to Camera, serial 52303 queued 13:08:59 Received message from Master: op=PointingHead serial=52316 13:08:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:08:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:08:59 Point started: ret=0 13:08:59 point_skyscan result=0 13:09:00 Check angles 13:09:00 SkyScan query 13:09:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:09:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:09:00 Message to Master queued w/err=0: serial=52316 error=0 13:09:05 Received message from Master: op=Filter serial=52317 13:09:05 Color wheel filter change from 0 to 0 13:09:05 FLIGetFilterPos err=0 currentPosition=0 13:09:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:05 Filter is already there-color wheel unchanged 13:09:06 Received message from Master: op=Shutter serial=52318 13:09:06 Shutter LASER close 13:09:06 Received message from Camera: op=State serial=52320 13:09:06 GetSingleValue result=40 Value=cccccccc 13:09:06 SkyScan query 13:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:09:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:06 Parameters OK 13:09:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:06 Set A/D data flow result=40 13:09:06 Set A/D channel type result=40 13:09:06 Set A/D encoding result=40 13:09:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:06 Set channel filter=0.000000e+000 result=40 13:09:06 Config A/D Result=40 13:09:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:06 Get A/D filter: -9.255963e+061 result=40 13:09:06 Get A/D value=-858993460 result=40 13:09:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:06 Parameters OK 13:09:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:06 Set A/D data flow result=40 13:09:06 Set A/D channel type result=40 13:09:06 Set A/D encoding result=40 13:09:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:06 Set channel filter=0.000000e+000 result=40 13:09:06 Config A/D Result=40 13:09:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:06 Get A/D filter: -9.255963e+061 result=40 13:09:06 Get A/D value=-858993460 result=40 13:09:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:06 Aux= 13:09:06 Message to Camera, serial 52320 queued 13:09:43 Received message from Master: op=PointingHead serial=52333 13:09:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:09:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:09:43 Point started: ret=0 13:09:43 point_skyscan result=0 13:09:44 Check angles 13:09:44 SkyScan query 13:09:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 13:09:45 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 13:09:45 Check angles 13:09:45 SkyScan query 13:09:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 13:09:46 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 13:09:46 Check angles 13:09:46 SkyScan query 13:09:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.685<-16379 Statuses=0008 0009 13:09:46 Msec=1500 True Az=112.995 Ze=-65.685 Az status=0008 Ze status=0009 13:09:46 Check angles 13:09:46 SkyScan query 13:09:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 13:09:47 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 13:09:47 Check angles 13:09:47 SkyScan query 13:09:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.595<-19173 Statuses=0008 0009 13:09:48 Msec=3000 True Az=112.995 Ze=-107.595 Az status=0008 Ze status=0009 13:09:48 Check angles 13:09:48 SkyScan query 13:09:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.52<-20568 Statuses=0008 0009 13:09:49 Msec=3750 True Az=112.995 Ze=-128.52 Az status=0008 Ze status=0009 13:09:49 Check angles 13:09:49 SkyScan query 13:09:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.505<-21967 Statuses=0008 0009 13:09:49 Msec=4500 True Az=112.995 Ze=-149.505 Az status=0008 Ze status=0009 13:09:49 Check angles 13:09:49 SkyScan query 13:09:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.43<-23362 Statuses=0008 0009 13:09:50 Msec=5250 True Az=112.995 Ze=-170.43 Az status=0008 Ze status=0009 13:09:50 Check angles 13:09:50 SkyScan query 13:09:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:09:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:09:51 Message to Master queued w/err=0: serial=52333 error=0 13:09:56 Received message from Master: op=Filter serial=52334 13:09:56 Color wheel filter change from 0 to 0 13:09:56 FLIGetFilterPos err=0 currentPosition=0 13:09:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:56 Filter is already there-color wheel unchanged 13:09:56 Received message from Master: op=Shutter serial=52335 13:09:56 Shutter LASER open 13:09:56 Received message from Camera: op=State serial=52337 13:09:56 GetSingleValue result=40 Value=cccccccc 13:09:56 SkyScan query 13:09:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:09:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:57 Parameters OK 13:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:57 Set A/D data flow result=40 13:09:57 Set A/D channel type result=40 13:09:57 Set A/D encoding result=40 13:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:57 Set channel filter=0.000000e+000 result=40 13:09:57 Config A/D Result=40 13:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:57 Get A/D filter: -9.255963e+061 result=40 13:09:57 Get A/D value=-858993460 result=40 13:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:57 Parameters OK 13:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:57 Set A/D data flow result=40 13:09:57 Set A/D channel type result=40 13:09:57 Set A/D encoding result=40 13:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:57 Set channel filter=0.000000e+000 result=40 13:09:57 Config A/D Result=40 13:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:57 Get A/D filter: -9.255963e+061 result=40 13:09:57 Get A/D value=-858993460 result=40 13:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:57 Aux= 13:09:57 Message to Camera, serial 52337 queued 13:10:05 Received message from Master: op=Shutter serial=52347 13:10:05 Shutter LASER close 13:10:06 Received message from Master: op=PointingHead serial=52351 13:10:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:10:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:10:06 Point started: ret=0 13:10:06 point_skyscan result=0 13:10:07 Check angles 13:10:07 SkyScan query 13:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 13:10:07 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 13:10:08 Check angles 13:10:08 SkyScan query 13:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 13:10:08 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 13:10:08 Check angles 13:10:08 SkyScan query 13:10:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 13:10:09 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 13:10:09 Check angles 13:10:09 SkyScan query 13:10:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 13:10:10 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 13:10:10 Check angles 13:10:10 SkyScan query 13:10:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 13:10:10 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 13:10:11 Check angles 13:10:11 SkyScan query 13:10:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.965<-14531 Statuses=0008 0009 13:10:11 Msec=3750 True Az=112.995 Ze=-37.965 Az status=0008 Ze status=0009 13:10:11 Check angles 13:10:11 SkyScan query 13:10:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.01<-13134 Statuses=0008 0009 13:10:12 Msec=4500 True Az=112.995 Ze=-17.01 Az status=0008 Ze status=0009 13:10:12 Check angles 13:10:12 SkyScan query 13:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=3.93<-11738 Statuses=0008 0009 13:10:13 Msec=5250 True Az=112.995 Ze=3.93 Az status=0008 Ze status=0009 13:10:13 Check angles 13:10:13 SkyScan query 13:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:10:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:10:13 Message to Master queued w/err=0: serial=52351 error=0 13:10:18 Received message from Master: op=Filter serial=52352 13:10:18 Color wheel filter change from 0 to 0 13:10:18 FLIGetFilterPos err=0 currentPosition=0 13:10:18 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:18 Filter is already there-color wheel unchanged 13:10:19 Received message from Master: op=Shutter serial=52353 13:10:19 Shutter LASER close 13:10:19 Received message from Camera: op=State serial=52355 13:10:19 GetSingleValue result=40 Value=cccccccc 13:10:19 SkyScan query 13:10:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:10:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:19 Parameters OK 13:10:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:19 Set A/D data flow result=40 13:10:19 Set A/D channel type result=40 13:10:19 Set A/D encoding result=40 13:10:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:19 Set channel filter=0.000000e+000 result=40 13:10:19 Config A/D Result=40 13:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:19 Get A/D filter: -9.255963e+061 result=40 13:10:19 Get A/D value=-858993460 result=40 13:10:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:19 Parameters OK 13:10:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:19 Set A/D data flow result=40 13:10:19 Set A/D channel type result=40 13:10:19 Set A/D encoding result=40 13:10:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:19 Set channel filter=0.000000e+000 result=40 13:10:19 Config A/D Result=40 13:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:19 Get A/D filter: -9.255963e+061 result=40 13:10:19 Get A/D value=-858993460 result=40 13:10:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:19 Aux= 13:10:19 Message to Camera, serial 52355 queued 13:10:56 Received message from Master: op=PointingHead serial=52368 13:10:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:10:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:10:57 Point started: ret=0 13:10:57 point_skyscan result=0 13:10:57 Check angles 13:10:57 SkyScan query 13:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:10:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:10:58 Message to Master queued w/err=0: serial=52368 error=0 13:11:03 Received message from Master: op=Filter serial=52369 13:11:03 Color wheel filter change from 0 to 0 13:11:03 FLIGetFilterPos err=0 currentPosition=0 13:11:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:03 Filter is already there-color wheel unchanged 13:11:03 Received message from Master: op=Shutter serial=52370 13:11:03 Shutter LASER close 13:11:03 Received message from Camera: op=State serial=52372 13:11:03 GetSingleValue result=40 Value=cccccccc 13:11:03 SkyScan query 13:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:11:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:04 Parameters OK 13:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:04 Set A/D data flow result=40 13:11:04 Set A/D channel type result=40 13:11:04 Set A/D encoding result=40 13:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:04 Set channel filter=0.000000e+000 result=40 13:11:04 Config A/D Result=40 13:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:04 Get A/D filter: -9.255963e+061 result=40 13:11:04 Get A/D value=-858993460 result=40 13:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:04 Parameters OK 13:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:04 Set A/D data flow result=40 13:11:04 Set A/D channel type result=40 13:11:04 Set A/D encoding result=40 13:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:04 Set channel filter=0.000000e+000 result=40 13:11:04 Config A/D Result=40 13:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:04 Get A/D filter: -9.255963e+061 result=40 13:11:04 Get A/D value=-858993460 result=40 13:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:04 Aux= 13:11:04 Message to Camera, serial 52372 queued 13:11:41 Received message from Master: op=PointingHead serial=52385 13:11:41 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:11:41 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:11:41 Point started: ret=0 13:11:41 point_skyscan result=0 13:11:42 Check angles 13:11:42 SkyScan query 13:11:42 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.495<-12433 Statuses=0009 0008 13:11:42 Msec=0 True Az=135.915 Ze=-6.495 Az status=0009 Ze status=0008 13:11:42 Check angles 13:11:42 SkyScan query 13:11:43 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.48<-12432 Statuses=0009 0008 13:11:43 Msec=750 True Az=153.78 Ze=-6.48 Az status=0009 Ze status=0008 13:11:43 Check angles 13:11:43 SkyScan query 13:11:44 SkyScan query done: ret=0 az=171.435<-11429 ze=-6.48<-12432 Statuses=0009 0008 13:11:44 Msec=1500 True Az=171.435 Ze=-6.48 Az status=0009 Ze status=0008 13:11:44 Check angles 13:11:44 SkyScan query 13:11:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 13:11:44 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 13:11:44 Message to Master queued w/err=0: serial=52385 error=0 13:11:49 Received message from Master: op=Filter serial=52386 13:11:49 Color wheel filter change from 0 to 0 13:11:49 FLIGetFilterPos err=0 currentPosition=0 13:11:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:49 Filter is already there-color wheel unchanged 13:11:50 Received message from Master: op=Shutter serial=52387 13:11:50 Shutter LASER close 13:11:50 Received message from Camera: op=State serial=52389 13:11:50 GetSingleValue result=40 Value=cccccccc 13:11:50 SkyScan query 13:11:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 13:11:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:50 Parameters OK 13:11:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:50 Set A/D data flow result=40 13:11:50 Set A/D channel type result=40 13:11:50 Set A/D encoding result=40 13:11:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:50 Set channel filter=0.000000e+000 result=40 13:11:50 Config A/D Result=40 13:11:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:50 Get A/D filter: -9.255963e+061 result=40 13:11:50 Get A/D value=-858993460 result=40 13:11:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:50 Parameters OK 13:11:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:50 Set A/D data flow result=40 13:11:50 Set A/D channel type result=40 13:11:50 Set A/D encoding result=40 13:11:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:50 Set channel filter=0.000000e+000 result=40 13:11:50 Config A/D Result=40 13:11:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:50 Get A/D filter: -9.255963e+061 result=40 13:11:50 Get A/D value=-858993460 result=40 13:11:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:50 Aux= 13:11:50 Message to Camera, serial 52389 queued 13:12:27 Received message from Master: op=PointingHead serial=52402 13:12:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:12:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:12:27 Point started: ret=0 13:12:27 point_skyscan result=0 13:12:28 Check angles 13:12:28 SkyScan query 13:12:29 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 13:12:29 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 13:12:29 Check angles 13:12:29 SkyScan query 13:12:30 SkyScan query done: ret=0 az=135.48<-9032 ze=6.495<-11567 Statuses=0009 0008 13:12:30 Msec=750 True Az=135.48 Ze=6.495 Az status=0009 Ze status=0008 13:12:30 Check angles 13:12:30 SkyScan query 13:12:30 SkyScan query done: ret=0 az=117.975<-7865 ze=6.495<-11567 Statuses=0009 0008 13:12:30 Msec=1500 True Az=117.975 Ze=6.495 Az status=0009 Ze status=0008 13:12:30 Check angles 13:12:30 SkyScan query 13:12:31 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 13:12:31 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 13:12:31 Message to Master queued w/err=0: serial=52402 error=0 13:12:36 Received message from Master: op=Filter serial=52403 13:12:36 Color wheel filter change from 0 to 0 13:12:36 FLIGetFilterPos err=0 currentPosition=0 13:12:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:36 Filter is already there-color wheel unchanged 13:12:36 Received message from Master: op=Shutter serial=52404 13:12:36 Shutter LASER close 13:12:36 Received message from Camera: op=State serial=52406 13:12:36 GetSingleValue result=40 Value=cccccccc 13:12:36 SkyScan query 13:12:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:12:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:37 Parameters OK 13:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:37 Set A/D data flow result=40 13:12:37 Set A/D channel type result=40 13:12:37 Set A/D encoding result=40 13:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:37 Set channel filter=0.000000e+000 result=40 13:12:37 Config A/D Result=40 13:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:37 Get A/D filter: -9.255963e+061 result=40 13:12:37 Get A/D value=-858993460 result=40 13:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:37 Parameters OK 13:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:37 Set A/D data flow result=40 13:12:37 Set A/D channel type result=40 13:12:37 Set A/D encoding result=40 13:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:37 Set channel filter=0.000000e+000 result=40 13:12:37 Config A/D Result=40 13:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:37 Get A/D filter: -9.255963e+061 result=40 13:12:37 Get A/D value=-858993460 result=40 13:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:37 Aux= 13:12:37 Message to Camera, serial 52406 queued 13:13:14 Received message from Master: op=PointingHead serial=52419 13:13:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:13:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:13:14 Point started: ret=0 13:13:14 point_skyscan result=0 13:13:15 Check angles 13:13:15 SkyScan query 13:13:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 13:13:15 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 13:13:16 Check angles 13:13:16 SkyScan query 13:13:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 13:13:16 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 13:13:16 Check angles 13:13:16 SkyScan query 13:13:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.685<-16379 Statuses=0008 0009 13:13:17 Msec=1500 True Az=112.995 Ze=-65.685 Az status=0008 Ze status=0009 13:13:17 Check angles 13:13:17 SkyScan query 13:13:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 13:13:18 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 13:13:18 Check angles 13:13:18 SkyScan query 13:13:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.015<-19201 Statuses=0008 0009 13:13:18 Msec=3000 True Az=112.995 Ze=-108.015 Az status=0008 Ze status=0009 13:13:19 Check angles 13:13:19 SkyScan query 13:13:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.39<-20626 Statuses=0008 0009 13:13:19 Msec=3750 True Az=112.995 Ze=-129.39 Az status=0008 Ze status=0009 13:13:19 Check angles 13:13:19 SkyScan query 13:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.345<-22023 Statuses=0008 0009 13:13:20 Msec=4500 True Az=112.995 Ze=-150.345 Az status=0008 Ze status=0009 13:13:20 Check angles 13:13:20 SkyScan query 13:13:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 13:13:21 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 13:13:21 Check angles 13:13:21 SkyScan query 13:13:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:13:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:13:21 Message to Master queued w/err=0: serial=52419 error=0 13:13:26 Received message from Master: op=Filter serial=52420 13:13:26 Color wheel filter change from 0 to 0 13:13:26 FLIGetFilterPos err=0 currentPosition=0 13:13:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:26 Filter is already there-color wheel unchanged 13:13:27 Received message from Master: op=Shutter serial=52421 13:13:27 Shutter LASER open 13:13:27 Received message from Camera: op=State serial=52423 13:13:27 GetSingleValue result=40 Value=cccccccc 13:13:27 SkyScan query 13:13:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:13:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:27 Parameters OK 13:13:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:27 Set A/D data flow result=40 13:13:27 Set A/D channel type result=40 13:13:27 Set A/D encoding result=40 13:13:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:27 Set channel filter=0.000000e+000 result=40 13:13:27 Config A/D Result=40 13:13:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:27 Get A/D filter: -9.255963e+061 result=40 13:13:27 Get A/D value=-858993460 result=40 13:13:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:27 Parameters OK 13:13:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:27 Set A/D data flow result=40 13:13:27 Set A/D channel type result=40 13:13:27 Set A/D encoding result=40 13:13:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:27 Set channel filter=0.000000e+000 result=40 13:13:27 Config A/D Result=40 13:13:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:27 Get A/D filter: -9.255963e+061 result=40 13:13:27 Get A/D value=-858993460 result=40 13:13:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:27 Aux= 13:13:27 Message to Camera, serial 52423 queued 13:13:36 Received message from Master: op=Shutter serial=52433 13:13:36 Shutter LASER close 13:13:36 Received message from Master: op=PointingHead serial=52437 13:13:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:13:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:13:37 Point started: ret=0 13:13:37 point_skyscan result=0 13:13:37 Check angles 13:13:37 SkyScan query 13:13:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.875<-21525 Statuses=0008 0009 13:13:38 Msec=0 True Az=112.995 Ze=-142.875 Az status=0008 Ze status=0009 13:13:38 Check angles 13:13:38 SkyScan query 13:13:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.905<-20127 Statuses=0008 0009 13:13:39 Msec=750 True Az=112.995 Ze=-121.905 Az status=0008 Ze status=0009 13:13:39 Check angles 13:13:39 SkyScan query 13:13:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 13:13:39 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 13:13:40 Check angles 13:13:40 SkyScan query 13:13:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.025<-17335 Statuses=0008 0009 13:13:40 Msec=2250 True Az=112.995 Ze=-80.025 Az status=0008 Ze status=0009 13:13:40 Check angles 13:13:40 SkyScan query 13:13:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.07<-15938 Statuses=0008 0009 13:13:41 Msec=3000 True Az=112.995 Ze=-59.07 Az status=0008 Ze status=0009 13:13:41 Check angles 13:13:41 SkyScan query 13:13:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.085<-14539 Statuses=0008 0009 13:13:42 Msec=3750 True Az=112.995 Ze=-38.085 Az status=0008 Ze status=0009 13:13:42 Check angles 13:13:42 SkyScan query 13:13:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.71<-13114 Statuses=0008 0009 13:13:42 Msec=4500 True Az=112.995 Ze=-16.71 Az status=0008 Ze status=0009 13:13:43 Check angles 13:13:43 SkyScan query 13:13:43 SkyScan query done: ret=0 az=112.995<-7533 ze=4.215<-11719 Statuses=0008 0009 13:13:43 Msec=5250 True Az=112.995 Ze=4.215 Az status=0008 Ze status=0009 13:13:43 Check angles 13:13:43 SkyScan query 13:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:13:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:13:44 Message to Master queued w/err=0: serial=52437 error=0 13:13:49 Received message from Master: op=Filter serial=52438 13:13:49 Color wheel filter change from 0 to 0 13:13:49 FLIGetFilterPos err=0 currentPosition=0 13:13:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:49 Filter is already there-color wheel unchanged 13:13:49 Received message from Master: op=Shutter serial=52439 13:13:49 Shutter LASER close 13:13:49 Received message from Camera: op=State serial=52441 13:13:49 GetSingleValue result=40 Value=cccccccc 13:13:49 SkyScan query 13:13:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:13:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:50 Parameters OK 13:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:50 Set A/D data flow result=40 13:13:50 Set A/D channel type result=40 13:13:50 Set A/D encoding result=40 13:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:50 Set channel filter=0.000000e+000 result=40 13:13:50 Config A/D Result=40 13:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:50 Get A/D filter: -9.255963e+061 result=40 13:13:50 Get A/D value=-858993460 result=40 13:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:50 Parameters OK 13:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:50 Set A/D data flow result=40 13:13:50 Set A/D channel type result=40 [UTC 2019-3-1 13:13:50] 13:13:50 Set A/D encoding result=40 13:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:50 Set channel filter=0.000000e+000 result=40 13:13:50 Config A/D Result=40 13:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:50 Get A/D filter: -9.255963e+061 result=40 13:13:50 Get A/D value=-858993460 result=40 13:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:50 Aux= 13:13:50 Message to Camera, serial 52441 queued 13:14:26 Received message from Master: op=PointingHead serial=52453 13:14:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:14:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:14:26 Point started: ret=0 13:14:26 point_skyscan result=0 13:14:27 Check angles 13:14:27 SkyScan query 13:14:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:14:27 Message to Master queued w/err=0: serial=52453 error=0 13:14:32 Received message from Master: op=Filter serial=52454 13:14:32 Color wheel filter change from 0 to 0 13:14:32 FLIGetFilterPos err=0 currentPosition=0 13:14:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:32 Filter is already there-color wheel unchanged 13:14:33 Received message from Master: op=Shutter serial=52455 13:14:33 Shutter LASER close 13:14:33 Received message from Camera: op=State serial=52457 13:14:33 GetSingleValue result=40 Value=cccccccc 13:14:33 SkyScan query 13:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:33 Parameters OK 13:14:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:33 Set A/D data flow result=40 13:14:33 Set A/D channel type result=40 13:14:33 Set A/D encoding result=40 13:14:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:33 Set channel filter=0.000000e+000 result=40 13:14:33 Config A/D Result=40 13:14:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:33 Get A/D filter: -9.255963e+061 result=40 13:14:33 Get A/D value=-858993460 result=40 13:14:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:33 Parameters OK 13:14:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:33 Set A/D data flow result=40 13:14:33 Set A/D channel type result=40 13:14:33 Set A/D encoding result=40 13:14:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:33 Set channel filter=0.000000e+000 result=40 13:14:33 Config A/D Result=40 13:14:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:33 Get A/D filter: -9.255963e+061 result=40 13:14:33 Get A/D value=-858993460 result=40 13:14:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:33 Aux= 13:14:33 Message to Camera, serial 52457 queued 13:15:10 Received message from Master: op=PointingHead serial=52470 13:15:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:15:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:15:10 Point started: ret=0 13:15:10 point_skyscan result=0 13:15:11 Check angles 13:15:11 SkyScan query 13:15:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:15:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:15:12 Message to Master queued w/err=0: serial=52470 error=0 13:15:17 Received message from Master: op=Filter serial=52471 13:15:17 Color wheel filter change from 0 to 0 13:15:17 FLIGetFilterPos err=0 currentPosition=0 13:15:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:17 Filter is already there-color wheel unchanged 13:15:17 Received message from Master: op=Shutter serial=52472 13:15:17 Shutter LASER close 13:15:17 Received message from Camera: op=State serial=52474 13:15:17 GetSingleValue result=40 Value=cccccccc 13:15:17 SkyScan query 13:15:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:15:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:17 Parameters OK 13:15:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:17 Set A/D data flow result=40 13:15:17 Set A/D channel type result=40 13:15:17 Set A/D encoding result=40 13:15:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:17 Set channel filter=0.000000e+000 result=40 13:15:17 Config A/D Result=40 13:15:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:17 Get A/D filter: -9.255963e+061 result=40 13:15:17 Get A/D value=-858993460 result=40 13:15:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:17 Parameters OK 13:15:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:17 Set A/D data flow result=40 13:15:17 Set A/D channel type result=40 13:15:17 Set A/D encoding result=40 13:15:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:17 Set channel filter=0.000000e+000 result=40 13:15:17 Config A/D Result=40 13:15:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:17 Get A/D filter: -9.255963e+061 result=40 13:15:17 Get A/D value=-858993460 result=40 13:15:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:17 Aux= 13:15:17 Message to Camera, serial 52474 queued 13:15:54 Received message from Master: op=PointingHead serial=52487 13:15:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:15:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:15:55 Point started: ret=0 13:15:55 point_skyscan result=0 13:15:55 Check angles 13:15:55 SkyScan query 13:15:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:15:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:15:56 Message to Master queued w/err=0: serial=52487 error=0 13:16:01 Received message from Master: op=Filter serial=52488 13:16:01 Color wheel filter change from 0 to 0 13:16:01 FLIGetFilterPos err=0 currentPosition=0 13:16:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:01 Filter is already there-color wheel unchanged 13:16:01 Received message from Master: op=Shutter serial=52489 13:16:01 Shutter LASER close 13:16:01 Received message from Camera: op=State serial=52491 13:16:01 GetSingleValue result=40 Value=cccccccc 13:16:01 SkyScan query 13:16:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:16:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:02 Parameters OK 13:16:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:02 Set A/D data flow result=40 13:16:02 Set A/D channel type result=40 13:16:02 Set A/D encoding result=40 13:16:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:02 Set channel filter=0.000000e+000 result=40 13:16:02 Config A/D Result=40 13:16:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:02 Get A/D filter: -9.255963e+061 result=40 13:16:02 Get A/D value=-858993460 result=40 13:16:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:02 Parameters OK 13:16:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:02 Set A/D data flow result=40 13:16:02 Set A/D channel type result=40 13:16:02 Set A/D encoding result=40 13:16:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:02 Set channel filter=0.000000e+000 result=40 13:16:02 Config A/D Result=40 13:16:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:02 Get A/D filter: -9.255963e+061 result=40 13:16:02 Get A/D value=-858993460 result=40 13:16:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:02 Aux= 13:16:02 Message to Camera, serial 52491 queued 13:16:39 Received message from Master: op=PointingHead serial=52504 13:16:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:16:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:16:39 Point started: ret=0 13:16:39 point_skyscan result=0 13:16:40 Check angles 13:16:40 SkyScan query 13:16:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 13:16:40 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 13:16:40 Check angles 13:16:40 SkyScan query 13:16:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 13:16:41 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 13:16:41 Check angles 13:16:41 SkyScan query 13:16:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.31<-16354 Statuses=0008 0009 13:16:42 Msec=1500 True Az=112.995 Ze=-65.31 Az status=0008 Ze status=0009 13:16:42 Check angles 13:16:42 SkyScan query 13:16:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.265<-17751 Statuses=0008 0009 13:16:43 Msec=2250 True Az=112.995 Ze=-86.265 Az status=0008 Ze status=0009 13:16:43 Check angles 13:16:43 SkyScan query 13:16:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.205<-19147 Statuses=0008 0009 13:16:43 Msec=3000 True Az=112.995 Ze=-107.205 Az status=0008 Ze status=0009 13:16:43 Check angles 13:16:43 SkyScan query 13:16:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.16<-20544 Statuses=0008 0009 13:16:44 Msec=3750 True Az=112.995 Ze=-128.16 Az status=0008 Ze status=0009 13:16:44 Check angles 13:16:44 SkyScan query 13:16:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.13<-21942 Statuses=0008 0009 13:16:45 Msec=4500 True Az=112.995 Ze=-149.13 Az status=0008 Ze status=0009 13:16:45 Check angles 13:16:45 SkyScan query 13:16:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.07<-23338 Statuses=0008 0009 13:16:46 Msec=5250 True Az=112.995 Ze=-170.07 Az status=0008 Ze status=0009 13:16:46 Check angles 13:16:46 SkyScan query 13:16:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:16:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:16:46 Message to Master queued w/err=0: serial=52504 error=0 13:16:51 Received message from Master: op=Filter serial=52505 13:16:51 Color wheel filter change from 0 to 0 13:16:51 FLIGetFilterPos err=0 currentPosition=0 13:16:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:51 Filter is already there-color wheel unchanged 13:16:51 Received message from Master: op=Shutter serial=52506 13:16:51 Shutter LASER open 13:16:52 Received message from Camera: op=State serial=52508 13:16:52 GetSingleValue result=40 Value=cccccccc 13:16:52 SkyScan query 13:16:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:16:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:52 Parameters OK 13:16:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:52 Set A/D data flow result=40 13:16:52 Set A/D channel type result=40 13:16:52 Set A/D encoding result=40 13:16:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:52 Set channel filter=0.000000e+000 result=40 13:16:52 Config A/D Result=40 13:16:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:52 Get A/D filter: -9.255963e+061 result=40 13:16:52 Get A/D value=-858993460 result=40 13:16:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:52 Parameters OK 13:16:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:52 Set A/D data flow result=40 13:16:52 Set A/D channel type result=40 13:16:52 Set A/D encoding result=40 13:16:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:52 Set channel filter=0.000000e+000 result=40 13:16:52 Config A/D Result=40 13:16:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:52 Get A/D filter: -9.255963e+061 result=40 13:16:52 Get A/D value=-858993460 result=40 13:16:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:52 Aux= 13:16:52 Message to Camera, serial 52508 queued 13:17:01 Received message from Master: op=Shutter serial=52518 13:17:01 Shutter LASER close 13:17:01 Received message from Master: op=PointingHead serial=52522 13:17:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:17:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:17:02 Point started: ret=0 13:17:02 point_skyscan result=0 13:17:02 Check angles 13:17:02 SkyScan query 13:17:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 13:17:03 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 13:17:03 Check angles 13:17:03 SkyScan query 13:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 13:17:04 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 13:17:04 Check angles 13:17:04 SkyScan query 13:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 13:17:04 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 13:17:05 Check angles 13:17:05 SkyScan query 13:17:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 13:17:05 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 13:17:05 Check angles 13:17:05 SkyScan query 13:17:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.785<-15919 Statuses=0008 0009 13:17:06 Msec=3000 True Az=112.995 Ze=-58.785 Az status=0008 Ze status=0009 13:17:06 Check angles 13:17:06 SkyScan query 13:17:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.395<-14493 Statuses=0008 0009 13:17:07 Msec=3750 True Az=112.995 Ze=-37.395 Az status=0008 Ze status=0009 13:17:07 Check angles 13:17:07 SkyScan query 13:17:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.425<-13095 Statuses=0008 0009 13:17:07 Msec=4500 True Az=112.995 Ze=-16.425 Az status=0008 Ze status=0009 13:17:08 Check angles 13:17:08 SkyScan query 13:17:08 SkyScan query done: ret=0 az=112.995<-7533 ze=4.44<-11704 Statuses=0008 0009 13:17:08 Msec=5250 True Az=112.995 Ze=4.44 Az status=0008 Ze status=0009 13:17:08 Check angles 13:17:08 SkyScan query 13:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:17:09 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:17:09 Message to Master queued w/err=0: serial=52522 error=0 13:17:14 Received message from Master: op=Filter serial=52523 13:17:14 Color wheel filter change from 0 to 0 13:17:14 FLIGetFilterPos err=0 currentPosition=0 13:17:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:14 Filter is already there-color wheel unchanged 13:17:14 Received message from Master: op=Shutter serial=52524 13:17:14 Shutter LASER close 13:17:14 Received message from Camera: op=State serial=52526 13:17:14 GetSingleValue result=40 Value=cccccccc 13:17:14 SkyScan query 13:17:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:17:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:15 Parameters OK 13:17:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:15 Set A/D data flow result=40 13:17:15 Set A/D channel type result=40 13:17:15 Set A/D encoding result=40 13:17:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:15 Set channel filter=0.000000e+000 result=40 13:17:15 Config A/D Result=40 13:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:15 Get A/D filter: -9.255963e+061 result=40 13:17:15 Get A/D value=-858993460 result=40 13:17:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:15 Parameters OK 13:17:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:15 Set A/D data flow result=40 13:17:15 Set A/D channel type result=40 13:17:15 Set A/D encoding result=40 13:17:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:15 Set channel filter=0.000000e+000 result=40 13:17:15 Config A/D Result=40 13:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:15 Get A/D filter: -9.255963e+061 result=40 13:17:15 Get A/D value=-858993460 result=40 13:17:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:15 Aux= 13:17:15 Message to Camera, serial 52526 queued 13:17:52 Received message from Master: op=PointingHead serial=52539 13:17:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:17:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:17:52 Point started: ret=0 13:17:52 point_skyscan result=0 13:17:53 Check angles 13:17:53 SkyScan query 13:17:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:17:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:17:53 Message to Master queued w/err=0: serial=52539 error=0 13:17:58 Received message from Master: op=Filter serial=52540 13:17:58 Color wheel filter change from 0 to 0 13:17:58 FLIGetFilterPos err=0 currentPosition=0 13:17:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:58 Filter is already there-color wheel unchanged 13:17:59 Received message from Master: op=Shutter serial=52541 13:17:59 Shutter LASER close 13:17:59 Received message from Camera: op=State serial=52543 13:17:59 GetSingleValue result=40 Value=cccccccc 13:17:59 SkyScan query 13:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:17:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:59 Parameters OK 13:17:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:59 Set A/D data flow result=40 13:17:59 Set A/D channel type result=40 13:17:59 Set A/D encoding result=40 13:17:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:59 Set channel filter=0.000000e+000 result=40 13:17:59 Config A/D Result=40 13:17:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:59 Get A/D filter: -9.255963e+061 result=40 13:17:59 Get A/D value=-858993460 result=40 13:17:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:59 Parameters OK 13:17:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:59 Set A/D data flow result=40 13:17:59 Set A/D channel type result=40 13:17:59 Set A/D encoding result=40 13:17:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:59 Set channel filter=0.000000e+000 result=40 13:17:59 Config A/D Result=40 13:17:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:59 Get A/D filter: -9.255963e+061 result=40 13:17:59 Get A/D value=-858993460 result=40 13:17:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:59 Aux= 13:17:59 Message to Camera, serial 52543 queued 13:18:36 Received message from Master: op=PointingHead serial=52556 13:18:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:18:36 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:18:36 Point started: ret=0 13:18:36 point_skyscan result=0 13:18:37 Check angles 13:18:37 SkyScan query 13:18:38 SkyScan query done: ret=0 az=135.885<-9059 ze=-6.51<-12434 Statuses=0009 0008 13:18:38 Msec=0 True Az=135.885 Ze=-6.51 Az status=0009 Ze status=0008 13:18:38 Check angles 13:18:38 SkyScan query 13:18:38 SkyScan query done: ret=0 az=153.36<-10224 ze=-6.495<-12433 Statuses=0009 0008 13:18:38 Msec=750 True Az=153.36 Ze=-6.495 Az status=0009 Ze status=0008 13:18:39 Check angles 13:18:39 SkyScan query 13:18:39 SkyScan query done: ret=0 az=170.955<-11397 ze=-6.495<-12433 Statuses=0009 0008 13:18:39 Msec=1500 True Az=170.955 Ze=-6.495 Az status=0009 Ze status=0008 13:18:39 Check angles 13:18:39 SkyScan query 13:18:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:18:40 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:18:40 Message to Master queued w/err=0: serial=52556 error=0 13:18:45 Received message from Master: op=Filter serial=52557 13:18:45 Color wheel filter change from 0 to 0 13:18:45 FLIGetFilterPos err=0 currentPosition=0 13:18:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:45 Filter is already there-color wheel unchanged 13:18:45 Received message from Master: op=Shutter serial=52558 13:18:45 Shutter LASER close 13:18:45 Received message from Camera: op=State serial=52560 13:18:45 GetSingleValue result=40 Value=cccccccc 13:18:45 SkyScan query 13:18:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:18:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:46 Parameters OK 13:18:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:46 Set A/D data flow result=40 13:18:46 Set A/D channel type result=40 13:18:46 Set A/D encoding result=40 13:18:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:46 Set channel filter=0.000000e+000 result=40 13:18:46 Config A/D Result=40 13:18:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:46 Get A/D filter: -9.255963e+061 result=40 13:18:46 Get A/D value=-858993460 result=40 13:18:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:46 Parameters OK 13:18:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:46 Set A/D data flow result=40 13:18:46 Set A/D channel type result=40 13:18:46 Set A/D encoding result=40 13:18:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:46 Set channel filter=0.000000e+000 result=40 13:18:46 Config A/D Result=40 13:18:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:46 Get A/D filter: -9.255963e+061 result=40 13:18:46 Get A/D value=-858993460 result=40 13:18:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:46 Aux= 13:18:46 Message to Camera, serial 52560 queued 13:19:23 Received message from Master: op=PointingHead serial=52573 13:19:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:19:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:19:23 Point started: ret=0 13:19:23 point_skyscan result=0 13:19:24 Check angles 13:19:24 SkyScan query 13:19:24 SkyScan query done: ret=0 az=153.06<-10204 ze=6.51<-11566 Statuses=0009 0008 13:19:24 Msec=0 True Az=153.06 Ze=6.51 Az status=0009 Ze status=0008 13:19:24 Check angles 13:19:24 SkyScan query 13:19:25 SkyScan query done: ret=0 az=135.645<-9043 ze=6.495<-11567 Statuses=0009 0008 13:19:25 Msec=750 True Az=135.645 Ze=6.495 Az status=0009 Ze status=0008 13:19:25 Check angles 13:19:25 SkyScan query 13:19:26 SkyScan query done: ret=0 az=117.72<-7848 ze=6.495<-11567 Statuses=0009 0008 13:19:26 Msec=1500 True Az=117.72 Ze=6.495 Az status=0009 Ze status=0008 13:19:26 Check angles 13:19:26 SkyScan query 13:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:19:27 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:19:27 Message to Master queued w/err=0: serial=52573 error=0 13:19:32 Received message from Master: op=Filter serial=52574 13:19:32 Color wheel filter change from 0 to 0 13:19:32 FLIGetFilterPos err=0 currentPosition=0 13:19:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:32 Filter is already there-color wheel unchanged 13:19:32 Received message from Master: op=Shutter serial=52575 13:19:32 Shutter LASER close 13:19:32 Received message from Camera: op=State serial=52577 13:19:32 GetSingleValue result=40 Value=cccccccc 13:19:32 SkyScan query 13:19:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:19:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:32 Parameters OK 13:19:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:32 Set A/D data flow result=40 13:19:32 Set A/D channel type result=40 13:19:32 Set A/D encoding result=40 13:19:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:32 Set channel filter=0.000000e+000 result=40 13:19:32 Config A/D Result=40 13:19:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:32 Get A/D filter: -9.255963e+061 result=40 13:19:32 Get A/D value=-858993460 result=40 13:19:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:32 Parameters OK 13:19:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:32 Set A/D data flow result=40 13:19:32 Set A/D channel type result=40 13:19:32 Set A/D encoding result=40 13:19:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:32 Set channel filter=0.000000e+000 result=40 13:19:32 Config A/D Result=40 13:19:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:32 Get A/D filter: -9.255963e+061 result=40 13:19:32 Get A/D value=-858993460 result=40 13:19:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:32 Aux= 13:19:32 Message to Camera, serial 52577 queued 13:20:09 Received message from Master: op=PointingHead serial=52590 13:20:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:20:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:20:09 Point started: ret=0 13:20:09 point_skyscan result=0 13:20:10 Check angles 13:20:10 SkyScan query 13:20:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 13:20:11 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 13:20:11 Check angles 13:20:11 SkyScan query 13:20:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 13:20:12 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 13:20:12 Check angles 13:20:12 SkyScan query 13:20:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.25<-16350 Statuses=0008 0009 13:20:12 Msec=1500 True Az=112.995 Ze=-65.25 Az status=0008 Ze status=0009 13:20:12 Check angles 13:20:12 SkyScan query 13:20:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 13:20:13 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 13:20:13 Check angles 13:20:13 SkyScan query 13:20:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.145<-19143 Statuses=0008 0009 13:20:14 Msec=3000 True Az=112.995 Ze=-107.145 Az status=0008 Ze status=0009 13:20:14 Check angles 13:20:14 SkyScan query 13:20:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.115<-20541 Statuses=0008 0009 13:20:15 Msec=3750 True Az=112.995 Ze=-128.115 Az status=0008 Ze status=0009 13:20:15 Check angles 13:20:15 SkyScan query 13:20:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.07<-21938 Statuses=0008 0009 13:20:15 Msec=4500 True Az=112.995 Ze=-149.07 Az status=0008 Ze status=0009 13:20:15 Check angles 13:20:15 SkyScan query 13:20:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.01<-23334 Statuses=0008 0009 13:20:16 Msec=5250 True Az=112.995 Ze=-170.01 Az status=0008 Ze status=0009 13:20:16 Check angles 13:20:16 SkyScan query 13:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:20:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:20:17 Message to Master queued w/err=0: serial=52590 error=0 13:20:22 Received message from Master: op=Filter serial=52591 13:20:22 Color wheel filter change from 0 to 0 13:20:22 FLIGetFilterPos err=0 currentPosition=0 13:20:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:22 Filter is already there-color wheel unchanged 13:20:22 Received message from Master: op=Shutter serial=52592 13:20:22 Shutter LASER open 13:20:22 Received message from Camera: op=State serial=52594 13:20:22 GetSingleValue result=40 Value=cccccccc 13:20:22 SkyScan query 13:20:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:20:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:23 Parameters OK 13:20:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:23 Set A/D data flow result=40 13:20:23 Set A/D channel type result=40 13:20:23 Set A/D encoding result=40 13:20:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:23 Set channel filter=0.000000e+000 result=40 13:20:23 Config A/D Result=40 13:20:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:23 Get A/D filter: -9.255963e+061 result=40 13:20:23 Get A/D value=-858993460 result=40 13:20:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:23 Parameters OK 13:20:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:23 Set A/D data flow result=40 13:20:23 Set A/D channel type result=40 13:20:23 Set A/D encoding result=40 13:20:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:23 Set channel filter=0.000000e+000 result=40 13:20:23 Config A/D Result=40 13:20:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:23 Get A/D filter: -9.255963e+061 result=40 13:20:23 Get A/D value=-858993460 result=40 13:20:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:23 Aux= 13:20:23 Message to Camera, serial 52594 queued 13:20:31 Received message from Master: op=Shutter serial=52604 13:20:31 Shutter LASER close 13:20:32 Received message from Master: op=PointingHead serial=52608 13:20:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:20:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:20:32 Point started: ret=0 13:20:32 point_skyscan result=0 13:20:33 Check angles 13:20:33 SkyScan query 13:20:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 13:20:33 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 13:20:33 Check angles 13:20:33 SkyScan query 13:20:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 13:20:34 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 13:20:34 Check angles 13:20:34 SkyScan query 13:20:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 13:20:35 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 13:20:35 Check angles 13:20:35 SkyScan query 13:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 13:20:36 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 13:20:36 Check angles 13:20:36 SkyScan query 13:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 13:20:36 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 13:20:36 Check angles 13:20:36 SkyScan query 13:20:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.025<-14535 Statuses=0008 0009 13:20:37 Msec=3750 True Az=112.995 Ze=-38.025 Az status=0008 Ze status=0009 13:20:37 Check angles 13:20:37 SkyScan query 13:20:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 13:20:38 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 13:20:38 Check angles 13:20:38 SkyScan query 13:20:39 SkyScan query done: ret=0 az=112.995<-7533 ze=4.26<-11716 Statuses=0008 0009 13:20:39 Msec=5250 True Az=112.995 Ze=4.26 Az status=0008 Ze status=0009 13:20:39 Check angles 13:20:39 SkyScan query 13:20:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:20:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:20:39 Message to Master queued w/err=0: serial=52608 error=0 13:20:44 Received message from Master: op=Filter serial=52609 13:20:44 Color wheel filter change from 0 to 0 13:20:44 FLIGetFilterPos err=0 currentPosition=0 13:20:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:44 Filter is already there-color wheel unchanged 13:20:44 Received message from Master: op=Shutter serial=52610 13:20:44 Shutter LASER close 13:20:45 Received message from Camera: op=State serial=52612 13:20:45 GetSingleValue result=40 Value=cccccccc 13:20:45 SkyScan query 13:20:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:20:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:45 Parameters OK 13:20:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:45 Set A/D data flow result=40 13:20:45 Set A/D channel type result=40 13:20:45 Set A/D encoding result=40 13:20:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:45 Set channel filter=0.000000e+000 result=40 13:20:45 Config A/D Result=40 13:20:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:45 Get A/D filter: -9.255963e+061 result=40 13:20:45 Get A/D value=-858993460 result=40 13:20:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:45 Parameters OK 13:20:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:45 Set A/D data flow result=40 13:20:45 Set A/D channel type result=40 13:20:45 Set A/D encoding result=40 13:20:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:45 Set channel filter=0.000000e+000 result=40 13:20:45 Config A/D Result=40 13:20:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:45 Get A/D filter: -9.255963e+061 result=40 13:20:45 Get A/D value=-858993460 result=40 13:20:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:45 Aux= 13:20:45 Message to Camera, serial 52612 queued 13:21:22 Received message from Master: op=PointingHead serial=52625 13:21:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:21:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:21:22 Point started: ret=0 13:21:22 point_skyscan result=0 13:21:23 Check angles 13:21:23 SkyScan query 13:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:21:24 Message to Master queued w/err=0: serial=52625 error=0 13:21:29 Received message from Master: op=Filter serial=52626 13:21:29 Color wheel filter change from 0 to 0 13:21:29 FLIGetFilterPos err=0 currentPosition=0 13:21:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:29 Filter is already there-color wheel unchanged 13:21:29 Received message from Master: op=Shutter serial=52627 13:21:29 Shutter LASER close 13:21:29 Received message from Camera: op=State serial=52629 13:21:29 GetSingleValue result=40 Value=cccccccc 13:21:29 SkyScan query 13:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:29 Parameters OK 13:21:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:29 Set A/D data flow result=40 13:21:29 Set A/D channel type result=40 13:21:29 Set A/D encoding result=40 13:21:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:29 Set channel filter=0.000000e+000 result=40 13:21:29 Config A/D Result=40 13:21:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:29 Get A/D filter: -9.255963e+061 result=40 13:21:29 Get A/D value=-858993460 result=40 13:21:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:29 Parameters OK 13:21:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:29 Set A/D data flow result=40 13:21:29 Set A/D channel type result=40 13:21:29 Set A/D encoding result=40 13:21:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:29 Set channel filter=0.000000e+000 result=40 13:21:29 Config A/D Result=40 13:21:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:29 Get A/D filter: -9.255963e+061 result=40 13:21:29 Get A/D value=-858993460 result=40 13:21:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:29 Aux= 13:21:29 Message to Camera, serial 52629 queued 13:22:06 Received message from Master: op=PointingHead serial=52642 13:22:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:22:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:22:07 Point started: ret=0 13:22:07 point_skyscan result=0 13:22:07 Check angles 13:22:07 SkyScan query 13:22:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:22:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:22:08 Message to Master queued w/err=0: serial=52642 error=0 13:22:13 Received message from Master: op=Filter serial=52643 13:22:13 Color wheel filter change from 0 to 0 13:22:13 FLIGetFilterPos err=0 currentPosition=0 13:22:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:13 Filter is already there-color wheel unchanged 13:22:13 Received message from Master: op=Shutter serial=52644 13:22:13 Shutter LASER close 13:22:13 Received message from Camera: op=State serial=52646 13:22:13 GetSingleValue result=40 Value=cccccccc 13:22:13 SkyScan query 13:22:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:22:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:14 Parameters OK 13:22:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:14 Set A/D data flow result=40 13:22:14 Set A/D channel type result=40 13:22:14 Set A/D encoding result=40 13:22:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:14 Set channel filter=0.000000e+000 result=40 13:22:14 Config A/D Result=40 13:22:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:14 Get A/D filter: -9.255963e+061 result=40 13:22:14 Get A/D value=-858993460 result=40 13:22:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:14 Parameters OK 13:22:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:14 Set A/D data flow result=40 13:22:14 Set A/D channel type result=40 13:22:14 Set A/D encoding result=40 13:22:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:14 Set channel filter=0.000000e+000 result=40 13:22:14 Config A/D Result=40 13:22:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:14 Get A/D filter: -9.255963e+061 result=40 13:22:14 Get A/D value=-858993460 result=40 13:22:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:14 Aux= 13:22:14 Message to Camera, serial 52646 queued 13:22:51 Received message from Master: op=PointingHead serial=52659 13:22:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:22:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:22:51 Point started: ret=0 13:22:51 point_skyscan result=0 13:22:52 Check angles 13:22:52 SkyScan query 13:22:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:22:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:22:52 Message to Master queued w/err=0: serial=52659 error=0 13:22:57 Received message from Master: op=Filter serial=52660 13:22:57 Color wheel filter change from 0 to 0 13:22:57 FLIGetFilterPos err=0 currentPosition=0 13:22:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:57 Filter is already there-color wheel unchanged 13:22:58 Received message from Master: op=Shutter serial=52661 13:22:58 Shutter LASER close 13:22:58 Received message from Camera: op=State serial=52663 13:22:58 GetSingleValue result=40 Value=cccccccc 13:22:58 SkyScan query 13:22:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:22:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:58 Parameters OK 13:22:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:58 Set A/D data flow result=40 13:22:58 Set A/D channel type result=40 13:22:58 Set A/D encoding result=40 13:22:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:58 Set channel filter=0.000000e+000 result=40 13:22:58 Config A/D Result=40 13:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:58 Get A/D filter: -9.255963e+061 result=40 13:22:58 Get A/D value=-858993460 result=40 13:22:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:58 Parameters OK 13:22:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:58 Set A/D data flow result=40 13:22:58 Set A/D channel type result=40 13:22:58 Set A/D encoding result=40 13:22:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:58 Set channel filter=0.000000e+000 result=40 13:22:58 Config A/D Result=40 13:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:58 Get A/D filter: -9.255963e+061 result=40 13:22:58 Get A/D value=-858993460 result=40 13:22:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:58 Aux= 13:22:58 Message to Camera, serial 52663 queued 13:23:35 Received message from Master: op=PointingHead serial=52676 13:23:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:23:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:23:35 Point started: ret=0 13:23:35 point_skyscan result=0 13:23:36 Check angles 13:23:36 SkyScan query 13:23:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.88<-13592 Statuses=0008 0009 13:23:37 Msec=0 True Az=112.995 Ze=-23.88 Az status=0008 Ze status=0009 13:23:37 Check angles 13:23:37 SkyScan query 13:23:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.835<-14989 Statuses=0008 0009 13:23:37 Msec=750 True Az=112.995 Ze=-44.835 Az status=0008 Ze status=0009 13:23:38 Check angles 13:23:38 SkyScan query 13:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.21<-16414 Statuses=0008 0009 13:23:38 Msec=1500 True Az=112.995 Ze=-66.21 Az status=0008 Ze status=0009 13:23:38 Check angles 13:23:38 SkyScan query 13:23:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.585<-17839 Statuses=0008 0009 13:23:39 Msec=2250 True Az=112.995 Ze=-87.585 Az status=0008 Ze status=0009 13:23:39 Check angles 13:23:39 SkyScan query 13:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.945<-19263 Statuses=0008 0009 13:23:40 Msec=3000 True Az=112.995 Ze=-108.945 Az status=0008 Ze status=0009 13:23:40 Check angles 13:23:40 SkyScan query 13:23:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.915<-20661 Statuses=0008 0009 13:23:41 Msec=3750 True Az=112.995 Ze=-129.915 Az status=0008 Ze status=0009 13:23:41 Check angles 13:23:41 SkyScan query 13:23:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.855<-22057 Statuses=0008 0009 13:23:41 Msec=4500 True Az=112.995 Ze=-150.855 Az status=0008 Ze status=0009 13:23:41 Check angles 13:23:41 SkyScan query 13:23:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0008 0009 13:23:42 Msec=5250 True Az=112.995 Ze=-171.525 Az status=0008 Ze status=0009 13:23:42 Check angles 13:23:42 SkyScan query 13:23:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:23:43 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:23:43 Message to Master queued w/err=0: serial=52676 error=0 13:23:48 Received message from Master: op=Filter serial=52677 13:23:48 Color wheel filter change from 0 to 0 13:23:48 FLIGetFilterPos err=0 currentPosition=0 13:23:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:48 Filter is already there-color wheel unchanged 13:23:48 Received message from Master: op=Shutter serial=52678 13:23:48 Shutter LASER open 13:23:48 Received message from Camera: op=State serial=52680 13:23:48 GetSingleValue result=40 Value=cccccccc 13:23:48 SkyScan query 13:23:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:23:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:49 Parameters OK 13:23:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:49 Set A/D data flow result=40 13:23:49 Set A/D channel type result=40 13:23:49 Set A/D encoding result=40 13:23:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:49 Set channel filter=0.000000e+000 result=40 13:23:49 Config A/D Result=40 13:23:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:49 Get A/D filter: -9.255963e+061 result=40 13:23:49 Get A/D value=-858993460 result=40 13:23:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:49 Parameters OK 13:23:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:49 Set A/D data flow result=40 13:23:49 Set A/D channel type result=40 13:23:49 Set A/D encoding result=40 13:23:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:49 Set channel filter=0.000000e+000 result=40 13:23:49 Config A/D Result=40 13:23:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:49 Get A/D filter: -9.255963e+061 result=40 13:23:49 Get A/D value=-858993460 result=40 13:23:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:49 Aux= 13:23:49 Message to Camera, serial 52680 queued [UTC 2019-3-1 13:23:50] 13:23:57 Received message from Master: op=Shutter serial=52690 13:23:57 Shutter LASER close 13:23:58 Received message from Master: op=PointingHead serial=52694 13:23:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:23:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:23:58 Point started: ret=0 13:23:58 point_skyscan result=0 13:23:59 Check angles 13:23:59 SkyScan query 13:23:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 13:23:59 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 13:24:00 Check angles 13:24:00 SkyScan query 13:24:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 13:24:00 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 13:24:00 Check angles 13:24:00 SkyScan query 13:24:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.665<-18711 Statuses=0008 0009 13:24:01 Msec=1500 True Az=112.995 Ze=-100.665 Az status=0008 Ze status=0009 13:24:01 Check angles 13:24:01 SkyScan query 13:24:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.275<-17285 Statuses=0008 0009 13:24:02 Msec=2250 True Az=112.995 Ze=-79.275 Az status=0008 Ze status=0009 13:24:02 Check angles 13:24:02 SkyScan query 13:24:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.305<-15887 Statuses=0008 0009 13:24:02 Msec=3000 True Az=112.995 Ze=-58.305 Az status=0008 Ze status=0009 13:24:03 Check angles 13:24:03 SkyScan query 13:24:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.38<-14492 Statuses=0008 0009 13:24:03 Msec=3750 True Az=112.995 Ze=-37.38 Az status=0008 Ze status=0009 13:24:03 Check angles 13:24:03 SkyScan query 13:24:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.41<-13094 Statuses=0008 0009 13:24:04 Msec=4500 True Az=112.995 Ze=-16.41 Az status=0008 Ze status=0009 13:24:04 Check angles 13:24:04 SkyScan query 13:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=4.44<-11704 Statuses=0008 0009 13:24:05 Msec=5250 True Az=112.995 Ze=4.44 Az status=0008 Ze status=0009 13:24:05 Check angles 13:24:05 SkyScan query 13:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:24:05 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:24:05 Message to Master queued w/err=0: serial=52694 error=0 13:24:10 Received message from Master: op=Filter serial=52695 13:24:10 Color wheel filter change from 0 to 0 13:24:10 FLIGetFilterPos err=0 currentPosition=0 13:24:10 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:10 Filter is already there-color wheel unchanged 13:24:11 Received message from Master: op=Shutter serial=52696 13:24:11 Shutter LASER close 13:24:11 Received message from Camera: op=State serial=52698 13:24:11 GetSingleValue result=40 Value=cccccccc 13:24:11 SkyScan query 13:24:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:24:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:11 Parameters OK 13:24:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:11 Set A/D data flow result=40 13:24:11 Set A/D channel type result=40 13:24:11 Set A/D encoding result=40 13:24:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:11 Set channel filter=0.000000e+000 result=40 13:24:11 Config A/D Result=40 13:24:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:11 Get A/D filter: -9.255963e+061 result=40 13:24:11 Get A/D value=-858993460 result=40 13:24:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:11 Parameters OK 13:24:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:11 Set A/D data flow result=40 13:24:11 Set A/D channel type result=40 13:24:11 Set A/D encoding result=40 13:24:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:11 Set channel filter=0.000000e+000 result=40 13:24:11 Config A/D Result=40 13:24:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:11 Get A/D filter: -9.255963e+061 result=40 13:24:11 Get A/D value=-858993460 result=40 13:24:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:11 Aux= 13:24:11 Message to Camera, serial 52698 queued 13:24:48 Received message from Master: op=PointingHead serial=52711 13:24:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:24:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:24:49 Point started: ret=0 13:24:49 point_skyscan result=0 13:24:49 Check angles 13:24:49 SkyScan query 13:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:24:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:24:50 Message to Master queued w/err=0: serial=52711 error=0 13:24:55 Received message from Master: op=Filter serial=52712 13:24:55 Color wheel filter change from 0 to 0 13:24:55 FLIGetFilterPos err=0 currentPosition=0 13:24:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:55 Filter is already there-color wheel unchanged 13:24:55 Received message from Master: op=Shutter serial=52713 13:24:55 Shutter LASER close 13:24:55 Received message from Camera: op=State serial=52715 13:24:55 GetSingleValue result=40 Value=cccccccc 13:24:55 SkyScan query 13:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:24:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:56 Parameters OK 13:24:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:56 Set A/D data flow result=40 13:24:56 Set A/D channel type result=40 13:24:56 Set A/D encoding result=40 13:24:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:56 Set channel filter=0.000000e+000 result=40 13:24:56 Config A/D Result=40 13:24:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:56 Get A/D filter: -9.255963e+061 result=40 13:24:56 Get A/D value=-858993460 result=40 13:24:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:56 Parameters OK 13:24:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:56 Set A/D data flow result=40 13:24:56 Set A/D channel type result=40 13:24:56 Set A/D encoding result=40 13:24:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:56 Set channel filter=0.000000e+000 result=40 13:24:56 Config A/D Result=40 13:24:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:56 Get A/D filter: -9.255963e+061 result=40 13:24:56 Get A/D value=-858993460 result=40 13:24:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:56 Aux= 13:24:56 Message to Camera, serial 52715 queued 13:25:32 Received message from Master: op=PointingHead serial=52728 13:25:32 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:25:32 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:25:33 Point started: ret=0 13:25:33 point_skyscan result=0 13:25:34 Check angles 13:25:34 SkyScan query 13:25:34 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 13:25:34 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 13:25:34 Check angles 13:25:34 SkyScan query 13:25:35 SkyScan query done: ret=0 az=153.69<-10246 ze=-6.495<-12433 Statuses=0009 0008 13:25:35 Msec=750 True Az=153.69 Ze=-6.495 Az status=0009 Ze status=0008 13:25:35 Check angles 13:25:35 SkyScan query 13:25:36 SkyScan query done: ret=0 az=171.54<-11436 ze=-6.495<-12433 Statuses=0009 0008 13:25:36 Msec=1500 True Az=171.54 Ze=-6.495 Az status=0009 Ze status=0008 13:25:36 Check angles 13:25:36 SkyScan query 13:25:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:25:36 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:25:36 Message to Master queued w/err=0: serial=52728 error=0 13:25:41 Received message from Master: op=Filter serial=52729 13:25:41 Color wheel filter change from 0 to 0 13:25:41 FLIGetFilterPos err=0 currentPosition=0 13:25:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:41 Filter is already there-color wheel unchanged 13:25:42 Received message from Master: op=Shutter serial=52730 13:25:42 Shutter LASER close 13:25:42 Received message from Camera: op=State serial=52732 13:25:42 GetSingleValue result=40 Value=cccccccc 13:25:42 SkyScan query 13:25:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:25:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:42 Parameters OK 13:25:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:42 Set A/D data flow result=40 13:25:42 Set A/D channel type result=40 13:25:42 Set A/D encoding result=40 13:25:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:42 Set channel filter=0.000000e+000 result=40 13:25:42 Config A/D Result=40 13:25:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:42 Get A/D filter: -9.255963e+061 result=40 13:25:42 Get A/D value=-858993460 result=40 13:25:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:42 Parameters OK 13:25:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:42 Set A/D data flow result=40 13:25:42 Set A/D channel type result=40 13:25:42 Set A/D encoding result=40 13:25:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:42 Set channel filter=0.000000e+000 result=40 13:25:42 Config A/D Result=40 13:25:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:42 Get A/D filter: -9.255963e+061 result=40 13:25:42 Get A/D value=-858993460 result=40 13:25:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:42 Aux= 13:25:42 Message to Camera, serial 52732 queued 13:26:19 Received message from Master: op=PointingHead serial=52745 13:26:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:26:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:26:19 Point started: ret=0 13:26:19 point_skyscan result=0 13:26:20 Check angles 13:26:20 SkyScan query 13:26:21 SkyScan query done: ret=0 az=152.55<-10170 ze=6.51<-11566 Statuses=0009 0008 13:26:21 Msec=0 True Az=152.55 Ze=6.51 Az status=0009 Ze status=0008 13:26:21 Check angles 13:26:21 SkyScan query 13:26:21 SkyScan query done: ret=0 az=135.285<-9019 ze=6.495<-11567 Statuses=0009 0008 13:26:21 Msec=750 True Az=135.285 Ze=6.495 Az status=0009 Ze status=0008 13:26:22 Check angles 13:26:22 SkyScan query 13:26:22 SkyScan query done: ret=0 az=117.825<-7855 ze=6.495<-11567 Statuses=0009 0008 13:26:22 Msec=1500 True Az=117.825 Ze=6.495 Az status=0009 Ze status=0008 13:26:22 Check angles 13:26:22 SkyScan query 13:26:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:26:23 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:26:23 Message to Master queued w/err=0: serial=52745 error=0 13:26:28 Received message from Master: op=Filter serial=52746 13:26:28 Color wheel filter change from 0 to 0 13:26:28 FLIGetFilterPos err=0 currentPosition=0 13:26:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:28 Filter is already there-color wheel unchanged 13:26:28 Received message from Master: op=Shutter serial=52747 13:26:28 Shutter LASER close 13:26:28 Received message from Camera: op=State serial=52749 13:26:28 GetSingleValue result=40 Value=cccccccc 13:26:28 SkyScan query 13:26:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:26:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:29 Parameters OK 13:26:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:29 Set A/D data flow result=40 13:26:29 Set A/D channel type result=40 13:26:29 Set A/D encoding result=40 13:26:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:29 Set channel filter=0.000000e+000 result=40 13:26:29 Config A/D Result=40 13:26:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:29 Get A/D filter: -9.255963e+061 result=40 13:26:29 Get A/D value=-858993460 result=40 13:26:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:29 Parameters OK 13:26:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:29 Set A/D data flow result=40 13:26:29 Set A/D channel type result=40 13:26:29 Set A/D encoding result=40 13:26:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:29 Set channel filter=0.000000e+000 result=40 13:26:29 Config A/D Result=40 13:26:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:29 Get A/D filter: -9.255963e+061 result=40 13:26:29 Get A/D value=-858993460 result=40 13:26:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:29 Aux= 13:26:29 Message to Camera, serial 52749 queued 13:27:05 Received message from Master: op=PointingHead serial=52761 13:27:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:27:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:27:05 Point started: ret=0 13:27:05 point_skyscan result=0 13:27:06 Check angles 13:27:06 SkyScan query 13:27:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.52<-13568 Statuses=0008 0009 13:27:07 Msec=0 True Az=112.995 Ze=-23.52 Az status=0008 Ze status=0009 13:27:07 Check angles 13:27:07 SkyScan query 13:27:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.925<-14995 Statuses=0008 0009 13:27:07 Msec=750 True Az=112.995 Ze=-44.925 Az status=0008 Ze status=0009 13:27:07 Check angles 13:27:07 SkyScan query 13:27:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.865<-16391 Statuses=0008 0009 13:27:08 Msec=1500 True Az=112.995 Ze=-65.865 Az status=0008 Ze status=0009 13:27:08 Check angles 13:27:08 SkyScan query 13:27:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 13:27:09 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 13:27:09 Check angles 13:27:09 SkyScan query 13:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.21<-19214 Statuses=0008 0009 13:27:10 Msec=3000 True Az=112.995 Ze=-108.21 Az status=0008 Ze status=0009 13:27:10 Check angles 13:27:10 SkyScan query 13:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.165<-20611 Statuses=0008 0009 13:27:10 Msec=3750 True Az=112.995 Ze=-129.165 Az status=0008 Ze status=0009 13:27:10 Check angles 13:27:10 SkyScan query 13:27:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.105<-22007 Statuses=0008 0009 13:27:11 Msec=4500 True Az=112.995 Ze=-150.105 Az status=0008 Ze status=0009 13:27:11 Check angles 13:27:11 SkyScan query 13:27:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0008 0009 13:27:12 Msec=5250 True Az=112.995 Ze=-170.955 Az status=0008 Ze status=0009 13:27:12 Check angles 13:27:12 SkyScan query 13:27:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:27:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:27:13 Message to Master queued w/err=0: serial=52761 error=0 13:27:18 Received message from Master: op=Filter serial=52762 13:27:18 Color wheel filter change from 0 to 0 13:27:18 FLIGetFilterPos err=0 currentPosition=0 13:27:18 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:18 Filter is already there-color wheel unchanged 13:27:18 Received message from Master: op=Shutter serial=52763 13:27:18 Shutter LASER open 13:27:18 Received message from Camera: op=State serial=52765 13:27:18 GetSingleValue result=40 Value=cccccccc 13:27:18 SkyScan query 13:27:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:27:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:18 Parameters OK 13:27:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:18 Set A/D data flow result=40 13:27:18 Set A/D channel type result=40 13:27:18 Set A/D encoding result=40 13:27:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:18 Set channel filter=0.000000e+000 result=40 13:27:18 Config A/D Result=40 13:27:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:18 Get A/D filter: -9.255963e+061 result=40 13:27:18 Get A/D value=-858993460 result=40 13:27:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:18 Parameters OK 13:27:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:18 Set A/D data flow result=40 13:27:18 Set A/D channel type result=40 13:27:18 Set A/D encoding result=40 13:27:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:18 Set channel filter=0.000000e+000 result=40 13:27:18 Config A/D Result=40 13:27:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:18 Get A/D filter: -9.255963e+061 result=40 13:27:18 Get A/D value=-858993460 result=40 13:27:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:18 Aux= 13:27:18 Message to Camera, serial 52765 queued 13:27:26 Received message from Master: op=Shutter serial=52774 13:27:26 Shutter LASER close 13:27:26 Received message from Master: op=PointingHead serial=52778 13:27:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:27:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:27:27 Point started: ret=0 13:27:27 point_skyscan result=0 13:27:28 Check angles 13:27:28 SkyScan query 13:27:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 13:27:28 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 13:27:28 Check angles 13:27:28 SkyScan query 13:27:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.755<-20117 Statuses=0008 0009 13:27:29 Msec=750 True Az=112.995 Ze=-121.755 Az status=0008 Ze status=0009 13:27:29 Check angles 13:27:29 SkyScan query 13:27:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 13:27:30 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 13:27:30 Check angles 13:27:30 SkyScan query 13:27:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 13:27:30 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 13:27:31 Check angles 13:27:31 SkyScan query 13:27:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 13:27:31 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 13:27:31 Check angles 13:27:31 SkyScan query 13:27:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.53<-14502 Statuses=0008 0009 13:27:32 Msec=3750 True Az=112.995 Ze=-37.53 Az status=0008 Ze status=0009 13:27:32 Check angles 13:27:32 SkyScan query 13:27:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.545<-13103 Statuses=0008 0009 13:27:33 Msec=4500 True Az=112.995 Ze=-16.545 Az status=0008 Ze status=0009 13:27:33 Check angles 13:27:33 SkyScan query 13:27:33 SkyScan query done: ret=0 az=112.995<-7533 ze=4.335<-11711 Statuses=0008 0009 13:27:33 Msec=5250 True Az=112.995 Ze=4.335 Az status=0008 Ze status=0009 13:27:34 Check angles 13:27:34 SkyScan query 13:27:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:27:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:27:34 Message to Master queued w/err=0: serial=52778 error=0 13:27:39 Received message from Master: op=Filter serial=52779 13:27:39 Color wheel filter change from 0 to 0 13:27:39 FLIGetFilterPos err=0 currentPosition=0 13:27:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:39 Filter is already there-color wheel unchanged 13:27:39 Received message from Master: op=Shutter serial=52780 13:27:39 Shutter LASER close 13:27:39 Received message from Camera: op=State serial=52782 13:27:39 GetSingleValue result=40 Value=cccccccc 13:27:39 SkyScan query 13:27:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:27:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:40 Parameters OK 13:27:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:40 Set A/D data flow result=40 13:27:40 Set A/D channel type result=40 13:27:40 Set A/D encoding result=40 13:27:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:40 Set channel filter=0.000000e+000 result=40 13:27:40 Config A/D Result=40 13:27:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:40 Get A/D filter: -9.255963e+061 result=40 13:27:40 Get A/D value=-858993460 result=40 13:27:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:40 Parameters OK 13:27:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:40 Set A/D data flow result=40 13:27:40 Set A/D channel type result=40 13:27:40 Set A/D encoding result=40 13:27:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:40 Set channel filter=0.000000e+000 result=40 13:27:40 Config A/D Result=40 13:27:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:40 Get A/D filter: -9.255963e+061 result=40 13:27:40 Get A/D value=-858993460 result=40 13:27:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:40 Aux= 13:27:40 Message to Camera, serial 52782 queued 13:28:17 Received message from Master: op=PointingHead serial=52795 13:28:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:28:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:28:17 Point started: ret=0 13:28:17 point_skyscan result=0 13:28:18 Check angles 13:28:18 SkyScan query 13:28:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:28:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:28:19 Message to Master queued w/err=0: serial=52795 error=0 13:28:24 Received message from Master: op=Filter serial=52796 13:28:24 Color wheel filter change from 0 to 0 13:28:24 FLIGetFilterPos err=0 currentPosition=0 13:28:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:24 Filter is already there-color wheel unchanged 13:28:24 Received message from Master: op=Shutter serial=52797 13:28:24 Shutter LASER close 13:28:24 Received message from Camera: op=State serial=52799 13:28:24 GetSingleValue result=40 Value=cccccccc 13:28:24 SkyScan query 13:28:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:28:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:24 Parameters OK 13:28:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:24 Set A/D data flow result=40 13:28:24 Set A/D channel type result=40 13:28:24 Set A/D encoding result=40 13:28:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:24 Set channel filter=0.000000e+000 result=40 13:28:24 Config A/D Result=40 13:28:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:24 Get A/D filter: -9.255963e+061 result=40 13:28:24 Get A/D value=-858993460 result=40 13:28:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:24 Parameters OK 13:28:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:24 Set A/D data flow result=40 13:28:24 Set A/D channel type result=40 13:28:24 Set A/D encoding result=40 13:28:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:24 Set channel filter=0.000000e+000 result=40 13:28:24 Config A/D Result=40 13:28:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:24 Get A/D filter: -9.255963e+061 result=40 13:28:24 Get A/D value=-858993460 result=40 13:28:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:24 Aux= 13:28:24 Message to Camera, serial 52799 queued 13:29:01 Received message from Master: op=PointingHead serial=52812 13:29:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:29:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:29:02 Point started: ret=0 13:29:02 point_skyscan result=0 13:29:02 Check angles 13:29:02 SkyScan query 13:29:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:29:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:29:03 Message to Master queued w/err=0: serial=52812 error=0 13:29:08 Received message from Master: op=Filter serial=52813 13:29:08 Color wheel filter change from 0 to 0 13:29:08 FLIGetFilterPos err=0 currentPosition=0 13:29:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:08 Filter is already there-color wheel unchanged 13:29:08 Received message from Master: op=Shutter serial=52814 13:29:08 Shutter LASER close 13:29:08 Received message from Camera: op=State serial=52816 13:29:08 GetSingleValue result=40 Value=cccccccc 13:29:08 SkyScan query 13:29:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:29:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:09 Parameters OK 13:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:09 Set A/D data flow result=40 13:29:09 Set A/D channel type result=40 13:29:09 Set A/D encoding result=40 13:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:09 Set channel filter=0.000000e+000 result=40 13:29:09 Config A/D Result=40 13:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:09 Get A/D filter: -9.255963e+061 result=40 13:29:09 Get A/D value=-858993460 result=40 13:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:09 Parameters OK 13:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:09 Set A/D data flow result=40 13:29:09 Set A/D channel type result=40 13:29:09 Set A/D encoding result=40 13:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:09 Set channel filter=0.000000e+000 result=40 13:29:09 Config A/D Result=40 13:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:09 Get A/D filter: -9.255963e+061 result=40 13:29:09 Get A/D value=-858993460 result=40 13:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:09 Aux= 13:29:09 Message to Camera, serial 52816 queued 13:29:46 Received message from Master: op=PointingHead serial=52829 13:29:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:29:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:29:46 Point started: ret=0 13:29:46 point_skyscan result=0 13:29:47 Check angles 13:29:47 SkyScan query 13:29:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:29:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:29:47 Message to Master queued w/err=0: serial=52829 error=0 13:29:52 Received message from Master: op=Filter serial=52830 13:29:52 Color wheel filter change from 0 to 0 13:29:52 FLIGetFilterPos err=0 currentPosition=0 13:29:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:52 Filter is already there-color wheel unchanged 13:29:52 Received message from Master: op=Shutter serial=52831 13:29:52 Shutter LASER close 13:29:53 Received message from Camera: op=State serial=52833 13:29:53 GetSingleValue result=40 Value=cccccccc 13:29:53 SkyScan query 13:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:29:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:53 Parameters OK 13:29:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:53 Set A/D data flow result=40 13:29:53 Set A/D channel type result=40 13:29:53 Set A/D encoding result=40 13:29:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:53 Set channel filter=0.000000e+000 result=40 13:29:53 Config A/D Result=40 13:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:53 Get A/D filter: -9.255963e+061 result=40 13:29:53 Get A/D value=-858993460 result=40 13:29:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:53 Parameters OK 13:29:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:53 Set A/D data flow result=40 13:29:53 Set A/D channel type result=40 13:29:53 Set A/D encoding result=40 13:29:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:53 Set channel filter=0.000000e+000 result=40 13:29:53 Config A/D Result=40 13:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:53 Get A/D filter: -9.255963e+061 result=40 13:29:53 Get A/D value=-858993460 result=40 13:29:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:53 Aux= 13:29:53 Message to Camera, serial 52833 queued 13:30:30 Received message from Master: op=PointingHead serial=52846 13:30:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:30:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:30:30 Point started: ret=0 13:30:30 point_skyscan result=0 13:30:31 Check angles 13:30:31 SkyScan query 13:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 13:30:32 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 13:30:32 Check angles 13:30:32 SkyScan query 13:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.105<-15007 Statuses=0008 0009 13:30:32 Msec=750 True Az=112.995 Ze=-45.105 Az status=0008 Ze status=0009 13:30:33 Check angles 13:30:33 SkyScan query 13:30:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.06<-16404 Statuses=0008 0009 13:30:33 Msec=1500 True Az=112.995 Ze=-66.06 Az status=0008 Ze status=0009 13:30:33 Check angles 13:30:33 SkyScan query 13:30:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.45<-17830 Statuses=0008 0009 13:30:34 Msec=2250 True Az=112.995 Ze=-87.45 Az status=0008 Ze status=0009 13:30:34 Check angles 13:30:34 SkyScan query 13:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.81<-19254 Statuses=0008 0009 13:30:35 Msec=3000 True Az=112.995 Ze=-108.81 Az status=0008 Ze status=0009 13:30:35 Check angles 13:30:35 SkyScan query 13:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-130.23<-20682 Statuses=0008 0009 13:30:35 Msec=3750 True Az=112.995 Ze=-130.23 Az status=0008 Ze status=0009 13:30:36 Check angles 13:30:36 SkyScan query 13:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.155<-22077 Statuses=0008 0009 13:30:36 Msec=4500 True Az=112.995 Ze=-151.155 Az status=0008 Ze status=0009 13:30:36 Check angles 13:30:36 SkyScan query 13:30:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.72<-23448 Statuses=0008 0009 13:30:37 Msec=5250 True Az=112.995 Ze=-171.72 Az status=0008 Ze status=0009 13:30:37 Check angles 13:30:37 SkyScan query 13:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:30:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:30:38 Message to Master queued w/err=0: serial=52846 error=0 13:30:43 Received message from Master: op=Filter serial=52847 13:30:43 Color wheel filter change from 0 to 0 13:30:43 FLIGetFilterPos err=0 currentPosition=0 13:30:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:43 Filter is already there-color wheel unchanged 13:30:43 Received message from Master: op=Shutter serial=52848 13:30:43 Shutter LASER open 13:30:43 Received message from Camera: op=State serial=52850 13:30:43 GetSingleValue result=40 Value=cccccccc 13:30:43 SkyScan query 13:30:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:30:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:44 Parameters OK 13:30:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:44 Set A/D data flow result=40 13:30:44 Set A/D channel type result=40 13:30:44 Set A/D encoding result=40 13:30:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:44 Set channel filter=0.000000e+000 result=40 13:30:44 Config A/D Result=40 13:30:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:44 Get A/D filter: -9.255963e+061 result=40 13:30:44 Get A/D value=-858993460 result=40 13:30:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:44 Parameters OK 13:30:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:44 Set A/D data flow result=40 13:30:44 Set A/D channel type result=40 13:30:44 Set A/D encoding result=40 13:30:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:44 Set channel filter=0.000000e+000 result=40 13:30:44 Config A/D Result=40 13:30:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:44 Get A/D filter: -9.255963e+061 result=40 13:30:44 Get A/D value=-858993460 result=40 13:30:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:44 Aux= 13:30:44 Message to Camera, serial 52850 queued 13:30:52 Received message from Master: op=Shutter serial=52860 13:30:52 Shutter LASER close 13:30:53 Received message from Master: op=PointingHead serial=52864 13:30:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:30:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:30:53 Point started: ret=0 13:30:53 point_skyscan result=0 13:30:54 Check angles 13:30:54 SkyScan query 13:30:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 13:30:54 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 13:30:54 Check angles 13:30:54 SkyScan query 13:30:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 13:30:55 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 13:30:55 Check angles 13:30:55 SkyScan query 13:30:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.31<-18754 Statuses=0008 0009 13:30:56 Msec=1500 True Az=112.995 Ze=-101.31 Az status=0008 Ze status=0009 13:30:56 Check angles 13:30:56 SkyScan query 13:30:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 13:30:57 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 13:30:57 Check angles 13:30:57 SkyScan query 13:30:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.98<-15932 Statuses=0008 0009 13:30:57 Msec=3000 True Az=112.995 Ze=-58.98 Az status=0008 Ze status=0009 13:30:57 Check angles 13:30:57 SkyScan query 13:30:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.995<-14533 Statuses=0008 0009 13:30:58 Msec=3750 True Az=112.995 Ze=-37.995 Az status=0008 Ze status=0009 13:30:58 Check angles 13:30:58 SkyScan query 13:30:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.055<-13137 Statuses=0008 0009 13:30:59 Msec=4500 True Az=112.995 Ze=-17.055 Az status=0008 Ze status=0009 13:30:59 Check angles 13:30:59 SkyScan query 13:31:00 SkyScan query done: ret=0 az=112.995<-7533 ze=3.915<-11739 Statuses=0008 0009 13:31:00 Msec=5250 True Az=112.995 Ze=3.915 Az status=0008 Ze status=0009 13:31:00 Check angles 13:31:00 SkyScan query 13:31:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:31:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:31:00 Message to Master queued w/err=0: serial=52864 error=0 13:31:05 Received message from Master: op=Filter serial=52865 13:31:05 Color wheel filter change from 0 to 0 13:31:05 FLIGetFilterPos err=0 currentPosition=0 13:31:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:05 Filter is already there-color wheel unchanged 13:31:05 Received message from Master: op=Shutter serial=52866 13:31:05 Shutter LASER close 13:31:06 Received message from Camera: op=State serial=52868 13:31:06 GetSingleValue result=40 Value=cccccccc 13:31:06 SkyScan query 13:31:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:31:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:06 Parameters OK 13:31:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:06 Set A/D data flow result=40 13:31:06 Set A/D channel type result=40 13:31:06 Set A/D encoding result=40 13:31:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:06 Set channel filter=0.000000e+000 result=40 13:31:06 Config A/D Result=40 13:31:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:06 Get A/D filter: -9.255963e+061 result=40 13:31:06 Get A/D value=-858993460 result=40 13:31:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:06 Parameters OK 13:31:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:06 Set A/D data flow result=40 13:31:06 Set A/D channel type result=40 13:31:06 Set A/D encoding result=40 13:31:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:06 Set channel filter=0.000000e+000 result=40 13:31:06 Config A/D Result=40 13:31:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:06 Get A/D filter: -9.255963e+061 result=40 13:31:06 Get A/D value=-858993460 result=40 13:31:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:06 Aux= 13:31:06 Message to Camera, serial 52868 queued 13:31:43 Received message from Master: op=PointingHead serial=52881 13:31:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:31:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:31:43 Point started: ret=0 13:31:43 point_skyscan result=0 13:31:44 Check angles 13:31:44 SkyScan query 13:31:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:31:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:31:45 Message to Master queued w/err=0: serial=52881 error=0 13:31:50 Received message from Master: op=Filter serial=52882 13:31:50 Color wheel filter change from 0 to 0 13:31:50 FLIGetFilterPos err=0 currentPosition=0 13:31:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:50 Filter is already there-color wheel unchanged 13:31:50 Received message from Master: op=Shutter serial=52883 13:31:50 Shutter LASER close 13:31:50 Received message from Camera: op=State serial=52885 13:31:50 GetSingleValue result=40 Value=cccccccc 13:31:50 SkyScan query 13:31:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:31:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:50 Parameters OK 13:31:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:50 Set A/D data flow result=40 13:31:50 Set A/D channel type result=40 13:31:50 Set A/D encoding result=40 13:31:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:50 Set channel filter=0.000000e+000 result=40 13:31:50 Config A/D Result=40 13:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:50 Get A/D filter: -9.255963e+061 result=40 13:31:50 Get A/D value=-858993460 result=40 13:31:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:50 Parameters OK 13:31:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:50 Set A/D data flow result=40 13:31:50 Set A/D channel type result=40 13:31:50 Set A/D encoding result=40 13:31:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:50 Set channel filter=0.000000e+000 result=40 13:31:50 Config A/D Result=40 13:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:50 Get A/D filter: -9.255963e+061 result=40 13:31:50 Get A/D value=-858993460 result=40 13:31:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:50 Aux= 13:31:50 Message to Camera, serial 52885 queued 13:32:27 Received message from Master: op=PointingHead serial=52898 13:32:27 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:32:27 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:32:28 Point started: ret=0 13:32:28 point_skyscan result=0 13:32:28 Check angles 13:32:28 SkyScan query 13:32:29 SkyScan query done: ret=0 az=136.44<-9096 ze=-6.51<-12434 Statuses=0009 0008 13:32:29 Msec=0 True Az=136.44 Ze=-6.51 Az status=0009 Ze status=0008 13:32:29 Check angles 13:32:29 SkyScan query 13:32:30 SkyScan query done: ret=0 az=153.96<-10264 ze=-6.495<-12433 Statuses=0009 0008 13:32:30 Msec=750 True Az=153.96 Ze=-6.495 Az status=0009 Ze status=0008 13:32:30 Check angles 13:32:30 SkyScan query 13:32:31 SkyScan query done: ret=0 az=171.375<-11425 ze=-6.495<-12433 Statuses=0009 0008 13:32:31 Msec=1500 True Az=171.375 Ze=-6.495 Az status=0009 Ze status=0008 13:32:31 Check angles 13:32:31 SkyScan query 13:32:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:32:31 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:32:31 Message to Master queued w/err=0: serial=52898 error=0 13:32:36 Received message from Master: op=Filter serial=52899 13:32:36 Color wheel filter change from 0 to 0 13:32:36 FLIGetFilterPos err=0 currentPosition=0 13:32:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:36 Filter is already there-color wheel unchanged 13:32:36 Received message from Master: op=Shutter serial=52900 13:32:36 Shutter LASER close 13:32:36 Received message from Camera: op=State serial=52902 13:32:36 GetSingleValue result=40 Value=cccccccc 13:32:36 SkyScan query 13:32:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:32:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:37 Parameters OK 13:32:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:37 Set A/D data flow result=40 13:32:37 Set A/D channel type result=40 13:32:37 Set A/D encoding result=40 13:32:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:37 Set channel filter=0.000000e+000 result=40 13:32:37 Config A/D Result=40 13:32:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:37 Get A/D filter: -9.255963e+061 result=40 13:32:37 Get A/D value=-858993460 result=40 13:32:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:37 Parameters OK 13:32:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:37 Set A/D data flow result=40 13:32:37 Set A/D channel type result=40 13:32:37 Set A/D encoding result=40 13:32:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:37 Set channel filter=0.000000e+000 result=40 13:32:37 Config A/D Result=40 13:32:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:37 Get A/D filter: -9.255963e+061 result=40 13:32:37 Get A/D value=-858993460 result=40 13:32:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:37 Aux= 13:32:37 Message to Camera, serial 52902 queued 13:33:13 Received message from Master: op=PointingHead serial=52914 13:33:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:33:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:33:13 Point started: ret=0 13:33:13 point_skyscan result=0 13:33:14 Check angles 13:33:14 SkyScan query 13:33:15 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 13:33:15 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 13:33:15 Check angles 13:33:15 SkyScan query 13:33:15 SkyScan query done: ret=0 az=135.405<-9027 ze=6.495<-11567 Statuses=0009 0008 13:33:15 Msec=750 True Az=135.405 Ze=6.495 Az status=0009 Ze status=0008 13:33:16 Check angles 13:33:16 SkyScan query 13:33:16 SkyScan query done: ret=0 az=117.93<-7862 ze=6.495<-11567 Statuses=0009 0008 13:33:16 Msec=1500 True Az=117.93 Ze=6.495 Az status=0009 Ze status=0008 13:33:16 Check angles 13:33:16 SkyScan query 13:33:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:33:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:33:17 Message to Master queued w/err=0: serial=52914 error=0 13:33:22 Received message from Master: op=Filter serial=52915 13:33:22 Color wheel filter change from 0 to 0 13:33:22 FLIGetFilterPos err=0 currentPosition=0 13:33:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:22 Filter is already there-color wheel unchanged 13:33:22 Received message from Master: op=Shutter serial=52916 13:33:22 Shutter LASER close 13:33:22 Received message from Camera: op=State serial=52918 13:33:22 GetSingleValue result=40 Value=cccccccc 13:33:22 SkyScan query 13:33:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:33:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:23 Parameters OK 13:33:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:23 Set A/D data flow result=40 13:33:23 Set A/D channel type result=40 13:33:23 Set A/D encoding result=40 13:33:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:23 Set channel filter=0.000000e+000 result=40 13:33:23 Config A/D Result=40 13:33:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:23 Get A/D filter: -9.255963e+061 result=40 13:33:23 Get A/D value=-858993460 result=40 13:33:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:23 Parameters OK 13:33:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:23 Set A/D data flow result=40 13:33:23 Set A/D channel type result=40 13:33:23 Set A/D encoding result=40 13:33:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:23 Set channel filter=0.000000e+000 result=40 13:33:23 Config A/D Result=40 13:33:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:23 Get A/D filter: -9.255963e+061 result=40 13:33:23 Get A/D value=-858993460 result=40 13:33:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:33:23 Aux= 13:33:23 Message to Camera, serial 52918 queued 13:33:38 Received message from Master: op=Identify serial=52919 13:34:00 Received message from Master: op=PointingHead serial=52934 13:34:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:34:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:34:00 Point started: ret=0 13:34:00 point_skyscan result=0 13:34:01 Check angles 13:34:01 SkyScan query 13:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.655<-13577 Statuses=0008 0009 13:34:01 Msec=0 True Az=112.995 Ze=-23.655 Az status=0008 Ze status=0009 13:34:01 Check angles 13:34:01 SkyScan query 13:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 13:34:02 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 13:34:02 Check angles 13:34:02 SkyScan query 13:34:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 13:34:03 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 13:34:03 Check angles 13:34:03 SkyScan query 13:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.94<-17796 Statuses=0008 0009 13:34:04 Msec=2250 True Az=112.995 Ze=-86.94 Az status=0008 Ze status=0009 13:34:04 Check angles 13:34:04 SkyScan query 13:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.895<-19193 Statuses=0008 0009 13:34:04 Msec=3000 True Az=112.995 Ze=-107.895 Az status=0008 Ze status=0009 13:34:04 Check angles 13:34:04 SkyScan query 13:34:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 13:34:05 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 13:34:05 Check angles 13:34:05 SkyScan query 13:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.24<-22016 Statuses=0008 0009 13:34:06 Msec=4500 True Az=112.995 Ze=-150.24 Az status=0008 Ze status=0009 13:34:06 Check angles 13:34:06 SkyScan query 13:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0008 0009 13:34:07 Msec=5250 True Az=112.995 Ze=-171.045 Az status=0008 Ze status=0009 13:34:07 Check angles 13:34:07 SkyScan query 13:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:34:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:34:07 Message to Master queued w/err=0: serial=52934 error=0 13:34:12 Received message from Master: op=Filter serial=52935 13:34:12 Color wheel filter change from 0 to 0 13:34:12 FLIGetFilterPos err=0 currentPosition=0 13:34:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:12 Filter is already there-color wheel unchanged 13:34:12 Received message from Master: op=Shutter serial=52936 13:34:12 Shutter LASER open 13:34:13 Received message from Camera: op=State serial=52938 13:34:13 GetSingleValue result=40 Value=cccccccc 13:34:13 SkyScan query 13:34:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:34:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:13 Parameters OK 13:34:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:13 Set A/D data flow result=40 13:34:13 Set A/D channel type result=40 13:34:13 Set A/D encoding result=40 13:34:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:13 Set channel filter=0.000000e+000 result=40 13:34:13 Config A/D Result=40 13:34:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:13 Get A/D filter: -9.255963e+061 result=40 13:34:13 Get A/D value=-858993460 result=40 13:34:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:13 Parameters OK 13:34:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:13 Set A/D data flow result=40 [UTC 2019-3-1 13:34:13] 13:34:13 Set A/D channel type result=40 13:34:13 Set A/D encoding result=40 13:34:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:13 Set channel filter=0.000000e+000 result=40 13:34:13 Config A/D Result=40 13:34:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:13 Get A/D filter: -9.255963e+061 result=40 13:34:13 Get A/D value=-858993460 result=40 13:34:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:13 Aux= 13:34:13 Message to Camera, serial 52938 queued 13:34:22 Received message from Master: op=Shutter serial=52948 13:34:22 Shutter LASER close 13:34:22 Received message from Master: op=PointingHead serial=52952 13:34:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:34:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:34:22 Point started: ret=0 13:34:22 point_skyscan result=0 13:34:23 Check angles 13:34:23 SkyScan query 13:34:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 13:34:24 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 13:34:24 Check angles 13:34:24 SkyScan query 13:34:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 13:34:25 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 13:34:25 Check angles 13:34:25 SkyScan query 13:34:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 13:34:25 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 13:34:25 Check angles 13:34:25 SkyScan query 13:34:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 13:34:26 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 13:34:26 Check angles 13:34:26 SkyScan query 13:34:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 13:34:27 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 13:34:27 Check angles 13:34:27 SkyScan query 13:34:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.25<-14550 Statuses=0008 0009 13:34:28 Msec=3750 True Az=112.995 Ze=-38.25 Az status=0008 Ze status=0009 13:34:28 Check angles 13:34:28 SkyScan query 13:34:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.295<-13153 Statuses=0008 0009 13:34:28 Msec=4500 True Az=112.995 Ze=-17.295 Az status=0008 Ze status=0009 13:34:28 Check angles 13:34:28 SkyScan query 13:34:29 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 13:34:29 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 13:34:29 Check angles 13:34:29 SkyScan query 13:34:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:34:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:34:30 Message to Master queued w/err=0: serial=52952 error=0 13:34:35 Received message from Master: op=Filter serial=52953 13:34:35 Color wheel filter change from 0 to 0 13:34:35 FLIGetFilterPos err=0 currentPosition=0 13:34:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:35 Filter is already there-color wheel unchanged 13:34:35 Received message from Master: op=Shutter serial=52954 13:34:35 Shutter LASER close 13:34:35 Received message from Camera: op=State serial=52956 13:34:35 GetSingleValue result=40 Value=cccccccc 13:34:35 SkyScan query 13:34:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:34:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:36 Parameters OK 13:34:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:36 Set A/D data flow result=40 13:34:36 Set A/D channel type result=40 13:34:36 Set A/D encoding result=40 13:34:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:36 Set channel filter=0.000000e+000 result=40 13:34:36 Config A/D Result=40 13:34:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:36 Get A/D filter: -9.255963e+061 result=40 13:34:36 Get A/D value=-858993460 result=40 13:34:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:36 Parameters OK 13:34:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:36 Set A/D data flow result=40 13:34:36 Set A/D channel type result=40 13:34:36 Set A/D encoding result=40 13:34:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:36 Set channel filter=0.000000e+000 result=40 13:34:36 Config A/D Result=40 13:34:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:36 Get A/D filter: -9.255963e+061 result=40 13:34:36 Get A/D value=-858993460 result=40 13:34:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:36 Aux= 13:34:36 Message to Camera, serial 52956 queued 13:35:13 Received message from Master: op=PointingHead serial=52969 13:35:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:35:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:35:13 Point started: ret=0 13:35:13 point_skyscan result=0 13:35:14 Check angles 13:35:14 SkyScan query 13:35:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:35:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:35:14 Message to Master queued w/err=0: serial=52969 error=0 13:35:19 Received message from Master: op=Filter serial=52970 13:35:19 Color wheel filter change from 0 to 0 13:35:19 FLIGetFilterPos err=0 currentPosition=0 13:35:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:19 Filter is already there-color wheel unchanged 13:35:19 Received message from Master: op=Shutter serial=52971 13:35:19 Shutter LASER close 13:35:19 Received message from Camera: op=State serial=52973 13:35:19 GetSingleValue result=40 Value=cccccccc 13:35:19 SkyScan query 13:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:35:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:20 Parameters OK 13:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:20 Set A/D data flow result=40 13:35:20 Set A/D channel type result=40 13:35:20 Set A/D encoding result=40 13:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:20 Set channel filter=0.000000e+000 result=40 13:35:20 Config A/D Result=40 13:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:20 Get A/D filter: -9.255963e+061 result=40 13:35:20 Get A/D value=-858993460 result=40 13:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:20 Parameters OK 13:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:20 Set A/D data flow result=40 13:35:20 Set A/D channel type result=40 13:35:20 Set A/D encoding result=40 13:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:20 Set channel filter=0.000000e+000 result=40 13:35:20 Config A/D Result=40 13:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:20 Get A/D filter: -9.255963e+061 result=40 13:35:20 Get A/D value=-858993460 result=40 13:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:20 Aux= 13:35:20 Message to Camera, serial 52973 queued 13:35:57 Received message from Master: op=PointingHead serial=52986 13:35:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:35:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:35:57 Point started: ret=0 13:35:57 point_skyscan result=0 13:35:58 Check angles 13:35:58 SkyScan query 13:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:35:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:35:59 Message to Master queued w/err=0: serial=52986 error=0 13:36:04 Received message from Master: op=Filter serial=52987 13:36:04 Color wheel filter change from 0 to 0 13:36:04 FLIGetFilterPos err=0 currentPosition=0 13:36:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:04 Filter is already there-color wheel unchanged 13:36:04 Received message from Master: op=Shutter serial=52988 13:36:04 Shutter LASER close 13:36:04 Received message from Camera: op=State serial=52990 13:36:04 GetSingleValue result=40 Value=cccccccc 13:36:04 SkyScan query 13:36:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:36:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:04 Parameters OK 13:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:04 Set A/D data flow result=40 13:36:04 Set A/D channel type result=40 13:36:04 Set A/D encoding result=40 13:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:04 Set channel filter=0.000000e+000 result=40 13:36:04 Config A/D Result=40 13:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:04 Get A/D filter: -9.255963e+061 result=40 13:36:04 Get A/D value=-858993460 result=40 13:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:04 Parameters OK 13:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:04 Set A/D data flow result=40 13:36:04 Set A/D channel type result=40 13:36:04 Set A/D encoding result=40 13:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:04 Set channel filter=0.000000e+000 result=40 13:36:04 Config A/D Result=40 13:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:04 Get A/D filter: -9.255963e+061 result=40 13:36:04 Get A/D value=-858993460 result=40 13:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:04 Aux= 13:36:04 Message to Camera, serial 52990 queued 13:36:41 Received message from Master: op=PointingHead serial=53003 13:36:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:36:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:36:42 Point started: ret=0 13:36:42 point_skyscan result=0 13:36:42 Check angles 13:36:42 SkyScan query 13:36:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:36:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:36:43 Message to Master queued w/err=0: serial=53003 error=0 13:36:48 Received message from Master: op=Filter serial=53004 13:36:48 Color wheel filter change from 0 to 0 13:36:48 FLIGetFilterPos err=0 currentPosition=0 13:36:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:48 Filter is already there-color wheel unchanged 13:36:48 Received message from Master: op=Shutter serial=53005 13:36:48 Shutter LASER close 13:36:48 Received message from Camera: op=State serial=53007 13:36:48 GetSingleValue result=40 Value=cccccccc 13:36:48 SkyScan query 13:36:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:36:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:49 Parameters OK 13:36:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:49 Set A/D data flow result=40 13:36:49 Set A/D channel type result=40 13:36:49 Set A/D encoding result=40 13:36:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:49 Set channel filter=0.000000e+000 result=40 13:36:49 Config A/D Result=40 13:36:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:49 Get A/D filter: -9.255963e+061 result=40 13:36:49 Get A/D value=-858993460 result=40 13:36:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:49 Parameters OK 13:36:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:49 Set A/D data flow result=40 13:36:49 Set A/D channel type result=40 13:36:49 Set A/D encoding result=40 13:36:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:49 Set channel filter=0.000000e+000 result=40 13:36:49 Config A/D Result=40 13:36:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:49 Get A/D filter: -9.255963e+061 result=40 13:36:49 Get A/D value=-858993460 result=40 13:36:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:49 Aux= 13:36:49 Message to Camera, serial 53007 queued 13:37:25 Received message from Master: op=PointingHead serial=53020 13:37:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:37:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:37:26 Point started: ret=0 13:37:26 point_skyscan result=0 13:37:27 Check angles 13:37:27 SkyScan query 13:37:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 13:37:27 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 13:37:27 Check angles 13:37:27 SkyScan query 13:37:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 13:37:28 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 13:37:28 Check angles 13:37:28 SkyScan query 13:37:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 13:37:29 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 13:37:29 Check angles 13:37:29 SkyScan query 13:37:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 13:37:29 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 13:37:30 Check angles 13:37:30 SkyScan query 13:37:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.61<-19174 Statuses=0008 0009 13:37:30 Msec=3000 True Az=112.995 Ze=-107.61 Az status=0008 Ze status=0009 13:37:30 Check angles 13:37:30 SkyScan query 13:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.535<-20569 Statuses=0008 0009 13:37:31 Msec=3750 True Az=112.995 Ze=-128.535 Az status=0008 Ze status=0009 13:37:31 Check angles 13:37:31 SkyScan query 13:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.52<-21968 Statuses=0008 0009 13:37:32 Msec=4500 True Az=112.995 Ze=-149.52 Az status=0008 Ze status=0009 13:37:32 Check angles 13:37:32 SkyScan query 13:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.445<-23363 Statuses=0008 0009 13:37:32 Msec=5250 True Az=112.995 Ze=-170.445 Az status=0008 Ze status=0009 13:37:33 Check angles 13:37:33 SkyScan query 13:37:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:37:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:37:33 Message to Master queued w/err=0: serial=53020 error=0 13:37:38 Received message from Master: op=Filter serial=53021 13:37:38 Color wheel filter change from 0 to 0 13:37:38 FLIGetFilterPos err=0 currentPosition=0 13:37:38 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:38 Filter is already there-color wheel unchanged 13:37:38 Received message from Master: op=Shutter serial=53022 13:37:38 Shutter LASER open 13:37:39 Received message from Camera: op=State serial=53024 13:37:39 GetSingleValue result=40 Value=cccccccc 13:37:39 SkyScan query 13:37:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:37:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:39 Parameters OK 13:37:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:39 Set A/D data flow result=40 13:37:39 Set A/D channel type result=40 13:37:39 Set A/D encoding result=40 13:37:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:39 Set channel filter=0.000000e+000 result=40 13:37:39 Config A/D Result=40 13:37:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:39 Get A/D filter: -9.255963e+061 result=40 13:37:39 Get A/D value=-858993460 result=40 13:37:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:39 Parameters OK 13:37:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:39 Set A/D data flow result=40 13:37:39 Set A/D channel type result=40 13:37:39 Set A/D encoding result=40 13:37:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:39 Set channel filter=0.000000e+000 result=40 13:37:39 Config A/D Result=40 13:37:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:39 Get A/D filter: -9.255963e+061 result=40 13:37:39 Get A/D value=-858993460 result=40 13:37:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:39 Aux= 13:37:39 Message to Camera, serial 53024 queued 13:37:48 Received message from Master: op=Shutter serial=53034 13:37:48 Shutter LASER close 13:37:48 Received message from Master: op=PointingHead serial=53038 13:37:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:37:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:37:49 Point started: ret=0 13:37:49 point_skyscan result=0 13:37:49 Check angles 13:37:49 SkyScan query 13:37:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 13:37:50 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 13:37:50 Check angles 13:37:50 SkyScan query 13:37:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 13:37:51 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 13:37:51 Check angles 13:37:51 SkyScan query 13:37:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.74<-18716 Statuses=0008 0009 13:37:51 Msec=1500 True Az=112.995 Ze=-100.74 Az status=0008 Ze status=0009 13:37:52 Check angles 13:37:52 SkyScan query 13:37:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.785<-17319 Statuses=0008 0009 13:37:52 Msec=2250 True Az=112.995 Ze=-79.785 Az status=0008 Ze status=0009 13:37:52 Check angles 13:37:52 SkyScan query 13:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.845<-15923 Statuses=0008 0009 13:37:53 Msec=3000 True Az=112.995 Ze=-58.845 Az status=0008 Ze status=0009 13:37:53 Check angles 13:37:53 SkyScan query 13:37:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 13:37:54 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 13:37:54 Check angles 13:37:54 SkyScan query 13:37:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.905<-13127 Statuses=0008 0009 13:37:54 Msec=4500 True Az=112.995 Ze=-16.905 Az status=0008 Ze status=0009 13:37:55 Check angles 13:37:55 SkyScan query 13:37:55 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 13:37:55 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 13:37:55 Check angles 13:37:55 SkyScan query 13:37:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:37:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:37:56 Message to Master queued w/err=0: serial=53038 error=0 13:38:01 Received message from Master: op=Filter serial=53039 13:38:01 Color wheel filter change from 0 to 0 13:38:01 FLIGetFilterPos err=0 currentPosition=0 13:38:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:01 Filter is already there-color wheel unchanged 13:38:01 Received message from Master: op=Shutter serial=53040 13:38:01 Shutter LASER close 13:38:01 Received message from Camera: op=State serial=53042 13:38:01 GetSingleValue result=40 Value=cccccccc 13:38:01 SkyScan query 13:38:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:38:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:02 Parameters OK 13:38:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:02 Set A/D data flow result=40 13:38:02 Set A/D channel type result=40 13:38:02 Set A/D encoding result=40 13:38:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:02 Set channel filter=0.000000e+000 result=40 13:38:02 Config A/D Result=40 13:38:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:02 Get A/D filter: -9.255963e+061 result=40 13:38:02 Get A/D value=-858993460 result=40 13:38:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:02 Parameters OK 13:38:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:02 Set A/D data flow result=40 13:38:02 Set A/D channel type result=40 13:38:02 Set A/D encoding result=40 13:38:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:02 Set channel filter=0.000000e+000 result=40 13:38:02 Config A/D Result=40 13:38:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:02 Get A/D filter: -9.255963e+061 result=40 13:38:02 Get A/D value=-858993460 result=40 13:38:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:02 Aux= 13:38:02 Message to Camera, serial 53042 queued 13:38:39 Received message from Master: op=PointingHead serial=53055 13:38:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:38:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:38:39 Point started: ret=0 13:38:39 point_skyscan result=0 13:38:40 Check angles 13:38:40 SkyScan query 13:38:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:38:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:38:40 Message to Master queued w/err=0: serial=53055 error=0 13:38:45 Received message from Master: op=Filter serial=53056 13:38:45 Color wheel filter change from 0 to 0 13:38:45 FLIGetFilterPos err=0 currentPosition=0 13:38:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:45 Filter is already there-color wheel unchanged 13:38:45 Received message from Master: op=Shutter serial=53057 13:38:45 Shutter LASER close 13:38:45 Received message from Camera: op=State serial=53059 13:38:45 GetSingleValue result=40 Value=cccccccc 13:38:45 SkyScan query 13:38:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:38:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:46 Parameters OK 13:38:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:46 Set A/D data flow result=40 13:38:46 Set A/D channel type result=40 13:38:46 Set A/D encoding result=40 13:38:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:46 Set channel filter=0.000000e+000 result=40 13:38:46 Config A/D Result=40 13:38:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:46 Get A/D filter: -9.255963e+061 result=40 13:38:46 Get A/D value=-858993460 result=40 13:38:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:46 Parameters OK 13:38:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:46 Set A/D data flow result=40 13:38:46 Set A/D channel type result=40 13:38:46 Set A/D encoding result=40 13:38:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:46 Set channel filter=0.000000e+000 result=40 13:38:46 Config A/D Result=40 13:38:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:46 Get A/D filter: -9.255963e+061 result=40 13:38:46 Get A/D value=-858993460 result=40 13:38:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:46 Aux= 13:38:46 Message to Camera, serial 53059 queued 13:39:23 Received message from Master: op=PointingHead serial=53072 13:39:23 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:39:23 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:39:23 Point started: ret=0 13:39:23 point_skyscan result=0 13:39:24 Check angles 13:39:24 SkyScan query 13:39:25 SkyScan query done: ret=0 az=135.69<-9046 ze=-6.51<-12434 Statuses=0009 0008 13:39:25 Msec=0 True Az=135.69 Ze=-6.51 Az status=0009 Ze status=0008 13:39:25 Check angles 13:39:25 SkyScan query 13:39:25 SkyScan query done: ret=0 az=153.21<-10214 ze=-6.495<-12433 Statuses=0009 0008 13:39:25 Msec=750 True Az=153.21 Ze=-6.495 Az status=0009 Ze status=0008 13:39:25 Check angles 13:39:25 SkyScan query 13:39:26 SkyScan query done: ret=0 az=170.685<-11379 ze=-6.495<-12433 Statuses=0009 0008 13:39:26 Msec=1500 True Az=170.685 Ze=-6.495 Az status=0009 Ze status=0008 13:39:26 Check angles 13:39:26 SkyScan query 13:39:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:39:27 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:39:27 Message to Master queued w/err=0: serial=53072 error=0 13:39:32 Received message from Master: op=Filter serial=53073 13:39:32 Color wheel filter change from 0 to 0 13:39:32 FLIGetFilterPos err=0 currentPosition=0 13:39:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:32 Filter is already there-color wheel unchanged 13:39:32 Received message from Master: op=Shutter serial=53074 13:39:32 Shutter LASER close 13:39:32 Received message from Camera: op=State serial=53076 13:39:32 GetSingleValue result=40 Value=cccccccc 13:39:32 SkyScan query 13:39:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:39:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:33 Parameters OK 13:39:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:33 Set A/D data flow result=40 13:39:33 Set A/D channel type result=40 13:39:33 Set A/D encoding result=40 13:39:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:33 Set channel filter=0.000000e+000 result=40 13:39:33 Config A/D Result=40 13:39:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:33 Get A/D filter: -9.255963e+061 result=40 13:39:33 Get A/D value=-858993460 result=40 13:39:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:33 Parameters OK 13:39:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:33 Set A/D data flow result=40 13:39:33 Set A/D channel type result=40 13:39:33 Set A/D encoding result=40 13:39:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:33 Set channel filter=0.000000e+000 result=40 13:39:33 Config A/D Result=40 13:39:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:33 Get A/D filter: -9.255963e+061 result=40 13:39:33 Get A/D value=-858993460 result=40 13:39:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:33 Aux= 13:39:33 Message to Camera, serial 53076 queued 13:40:09 Received message from Master: op=PointingHead serial=53089 13:40:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:40:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:40:10 Point started: ret=0 13:40:10 point_skyscan result=0 13:40:11 Check angles 13:40:11 SkyScan query 13:40:11 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 13:40:11 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 13:40:11 Check angles 13:40:11 SkyScan query 13:40:12 SkyScan query done: ret=0 az=135.6<-9040 ze=6.495<-11567 Statuses=0009 0008 13:40:12 Msec=750 True Az=135.6 Ze=6.495 Az status=0009 Ze status=0008 13:40:12 Check angles 13:40:12 SkyScan query 13:40:13 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 13:40:13 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 13:40:13 Check angles 13:40:13 SkyScan query 13:40:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:40:13 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:40:13 Message to Master queued w/err=0: serial=53089 error=0 13:40:18 Received message from Master: op=Filter serial=53090 13:40:18 Color wheel filter change from 0 to 0 13:40:18 FLIGetFilterPos err=0 currentPosition=0 13:40:18 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:18 Filter is already there-color wheel unchanged 13:40:19 Received message from Master: op=Shutter serial=53091 13:40:19 Shutter LASER close 13:40:19 Received message from Camera: op=State serial=53093 13:40:19 GetSingleValue result=40 Value=cccccccc 13:40:19 SkyScan query 13:40:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:40:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:19 Parameters OK 13:40:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:19 Set A/D data flow result=40 13:40:19 Set A/D channel type result=40 13:40:19 Set A/D encoding result=40 13:40:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:19 Set channel filter=0.000000e+000 result=40 13:40:19 Config A/D Result=40 13:40:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:19 Get A/D filter: -9.255963e+061 result=40 13:40:19 Get A/D value=-858993460 result=40 13:40:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:19 Parameters OK 13:40:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:19 Set A/D data flow result=40 13:40:19 Set A/D channel type result=40 13:40:19 Set A/D encoding result=40 13:40:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:19 Set channel filter=0.000000e+000 result=40 13:40:19 Config A/D Result=40 13:40:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:19 Get A/D filter: -9.255963e+061 result=40 13:40:19 Get A/D value=-858993460 result=40 13:40:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:19 Aux= 13:40:19 Message to Camera, serial 53093 queued 13:40:56 Received message from Master: op=PointingHead serial=53106 13:40:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:40:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:40:56 Point started: ret=0 13:40:56 point_skyscan result=0 13:40:57 Check angles 13:40:57 SkyScan query 13:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 13:40:58 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 13:40:58 Check angles 13:40:58 SkyScan query 13:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 13:40:58 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 13:40:59 Check angles 13:40:59 SkyScan query 13:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 13:40:59 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 13:40:59 Check angles 13:40:59 SkyScan query 13:41:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 13:41:00 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 13:41:00 Check angles 13:41:00 SkyScan query 13:41:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.58<-19172 Statuses=0008 0009 13:41:01 Msec=3000 True Az=112.995 Ze=-107.58 Az status=0008 Ze status=0009 13:41:01 Check angles 13:41:01 SkyScan query 13:41:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 13:41:01 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 13:41:02 Check angles 13:41:02 SkyScan query 13:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.91<-21994 Statuses=0008 0009 13:41:02 Msec=4500 True Az=112.995 Ze=-149.91 Az status=0008 Ze status=0009 13:41:02 Check angles 13:41:02 SkyScan query 13:41:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 13:41:03 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 13:41:03 Check angles 13:41:03 SkyScan query 13:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:41:04 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:41:04 Message to Master queued w/err=0: serial=53106 error=0 13:41:09 Received message from Master: op=Filter serial=53107 13:41:09 Color wheel filter change from 0 to 0 13:41:09 FLIGetFilterPos err=0 currentPosition=0 13:41:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:09 Filter is already there-color wheel unchanged 13:41:09 Received message from Master: op=Shutter serial=53108 13:41:09 Shutter LASER open 13:41:09 Received message from Camera: op=State serial=53110 13:41:09 GetSingleValue result=40 Value=cccccccc 13:41:09 SkyScan query 13:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:41:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:10 Parameters OK 13:41:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:10 Set A/D data flow result=40 13:41:10 Set A/D channel type result=40 13:41:10 Set A/D encoding result=40 13:41:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:10 Set channel filter=0.000000e+000 result=40 13:41:10 Config A/D Result=40 13:41:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:10 Get A/D filter: -9.255963e+061 result=40 13:41:10 Get A/D value=-858993460 result=40 13:41:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:10 Parameters OK 13:41:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:10 Set A/D data flow result=40 13:41:10 Set A/D channel type result=40 13:41:10 Set A/D encoding result=40 13:41:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:10 Set channel filter=0.000000e+000 result=40 13:41:10 Config A/D Result=40 13:41:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:10 Get A/D filter: -9.255963e+061 result=40 13:41:10 Get A/D value=-858993460 result=40 13:41:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:10 Aux= 13:41:10 Message to Camera, serial 53110 queued 13:41:18 Received message from Master: op=Shutter serial=53120 13:41:18 Shutter LASER close 13:41:18 Received message from Master: op=PointingHead serial=53124 13:41:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:41:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:41:19 Point started: ret=0 13:41:19 point_skyscan result=0 13:41:20 Check angles 13:41:20 SkyScan query 13:41:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 13:41:20 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 13:41:20 Check angles 13:41:20 SkyScan query 13:41:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.58<-20172 Statuses=0008 0009 13:41:21 Msec=750 True Az=112.995 Ze=-122.58 Az status=0008 Ze status=0009 13:41:21 Check angles 13:41:21 SkyScan query 13:41:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 13:41:22 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 13:41:22 Check angles 13:41:22 SkyScan query 13:41:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 13:41:22 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 13:41:23 Check angles 13:41:23 SkyScan query 13:41:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 13:41:23 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 13:41:23 Check angles 13:41:23 SkyScan query 13:41:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 13:41:24 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 13:41:24 Check angles 13:41:24 SkyScan query 13:41:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.905<-13127 Statuses=0008 0009 13:41:25 Msec=4500 True Az=112.995 Ze=-16.905 Az status=0008 Ze status=0009 13:41:25 Check angles 13:41:25 SkyScan query 13:41:25 SkyScan query done: ret=0 az=112.995<-7533 ze=4.395<-11707 Statuses=0008 0009 13:41:25 Msec=5250 True Az=112.995 Ze=4.395 Az status=0008 Ze status=0009 13:41:26 Check angles 13:41:26 SkyScan query 13:41:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:41:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:41:26 Message to Master queued w/err=0: serial=53124 error=0 13:41:31 Received message from Master: op=Filter serial=53125 13:41:31 Color wheel filter change from 0 to 0 13:41:31 FLIGetFilterPos err=0 currentPosition=0 13:41:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:31 Filter is already there-color wheel unchanged 13:41:31 Received message from Master: op=Shutter serial=53126 13:41:31 Shutter LASER close 13:41:32 Received message from Camera: op=State serial=53128 13:41:32 GetSingleValue result=40 Value=cccccccc 13:41:32 SkyScan query 13:41:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:32 Parameters OK 13:41:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:32 Set A/D data flow result=40 13:41:32 Set A/D channel type result=40 13:41:32 Set A/D encoding result=40 13:41:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:32 Set channel filter=0.000000e+000 result=40 13:41:32 Config A/D Result=40 13:41:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:32 Get A/D filter: -9.255963e+061 result=40 13:41:32 Get A/D value=-858993460 result=40 13:41:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:32 Parameters OK 13:41:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:32 Set A/D data flow result=40 13:41:32 Set A/D channel type result=40 13:41:32 Set A/D encoding result=40 13:41:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:32 Set channel filter=0.000000e+000 result=40 13:41:32 Config A/D Result=40 13:41:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:32 Get A/D filter: -9.255963e+061 result=40 13:41:32 Get A/D value=-858993460 result=40 13:41:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:32 Aux= 13:41:32 Message to Camera, serial 53128 queued 13:42:09 Received message from Master: op=PointingHead serial=53141 13:42:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:42:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:42:09 Point started: ret=0 13:42:09 point_skyscan result=0 13:42:10 Check angles 13:42:10 SkyScan query 13:42:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:42:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:42:11 Message to Master queued w/err=0: serial=53141 error=0 13:42:16 Received message from Master: op=Filter serial=53142 13:42:16 Color wheel filter change from 0 to 0 13:42:16 FLIGetFilterPos err=0 currentPosition=0 13:42:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:16 Filter is already there-color wheel unchanged 13:42:16 Received message from Master: op=Shutter serial=53143 13:42:16 Shutter LASER close 13:42:16 Received message from Camera: op=State serial=53145 13:42:16 GetSingleValue result=40 Value=cccccccc 13:42:16 SkyScan query 13:42:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:42:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:16 Parameters OK 13:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:16 Set A/D data flow result=40 13:42:16 Set A/D channel type result=40 13:42:16 Set A/D encoding result=40 13:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:16 Set channel filter=0.000000e+000 result=40 13:42:16 Config A/D Result=40 13:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:16 Get A/D filter: -9.255963e+061 result=40 13:42:16 Get A/D value=-858993460 result=40 13:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:16 Parameters OK 13:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:16 Set A/D data flow result=40 13:42:16 Set A/D channel type result=40 13:42:16 Set A/D encoding result=40 13:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:16 Set channel filter=0.000000e+000 result=40 13:42:16 Config A/D Result=40 13:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:16 Get A/D filter: -9.255963e+061 result=40 13:42:16 Get A/D value=-858993460 result=40 13:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:16 Aux= 13:42:16 Message to Camera, serial 53145 queued 13:42:53 Received message from Master: op=PointingHead serial=53158 13:42:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:42:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:42:54 Point started: ret=0 13:42:54 point_skyscan result=0 13:42:54 Check angles 13:42:54 SkyScan query 13:42:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:42:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:42:55 Message to Master queued w/err=0: serial=53158 error=0 13:43:00 Received message from Master: op=Filter serial=53159 13:43:00 Color wheel filter change from 0 to 0 13:43:00 FLIGetFilterPos err=0 currentPosition=0 13:43:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:00 Filter is already there-color wheel unchanged 13:43:00 Received message from Master: op=Shutter serial=53160 13:43:00 Shutter LASER close 13:43:00 Received message from Camera: op=State serial=53162 13:43:00 GetSingleValue result=40 Value=cccccccc 13:43:00 SkyScan query 13:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:43:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:01 Parameters OK 13:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:01 Set A/D data flow result=40 13:43:01 Set A/D channel type result=40 13:43:01 Set A/D encoding result=40 13:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:01 Set channel filter=0.000000e+000 result=40 13:43:01 Config A/D Result=40 13:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:01 Get A/D filter: -9.255963e+061 result=40 13:43:01 Get A/D value=-858993460 result=40 13:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:01 Parameters OK 13:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:01 Set A/D data flow result=40 13:43:01 Set A/D channel type result=40 13:43:01 Set A/D encoding result=40 13:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:01 Set channel filter=0.000000e+000 result=40 13:43:01 Config A/D Result=40 13:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:01 Get A/D filter: -9.255963e+061 result=40 13:43:01 Get A/D value=-858993460 result=40 13:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:01 Aux= 13:43:01 Message to Camera, serial 53162 queued 13:43:37 Received message from Master: op=PointingHead serial=53174 13:43:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:43:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:43:37 Point started: ret=0 13:43:37 point_skyscan result=0 13:43:38 Check angles 13:43:38 SkyScan query 13:43:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:43:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:43:38 Message to Master queued w/err=0: serial=53174 error=0 13:43:43 Received message from Master: op=Filter serial=53175 13:43:43 Color wheel filter change from 0 to 0 13:43:43 FLIGetFilterPos err=0 currentPosition=0 13:43:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:43 Filter is already there-color wheel unchanged 13:43:43 Received message from Master: op=Shutter serial=53176 13:43:43 Shutter LASER close 13:43:44 Received message from Camera: op=State serial=53178 13:43:44 GetSingleValue result=40 Value=cccccccc 13:43:44 SkyScan query 13:43:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:43:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:44 Parameters OK 13:43:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:44 Set A/D data flow result=40 13:43:44 Set A/D channel type result=40 13:43:44 Set A/D encoding result=40 13:43:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:44 Set channel filter=0.000000e+000 result=40 13:43:44 Config A/D Result=40 13:43:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:44 Get A/D filter: -9.255963e+061 result=40 13:43:44 Get A/D value=-858993460 result=40 13:43:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:44 Parameters OK 13:43:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:44 Set A/D data flow result=40 13:43:44 Set A/D channel type result=40 13:43:44 Set A/D encoding result=40 13:43:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:44 Set channel filter=0.000000e+000 result=40 13:43:44 Config A/D Result=40 13:43:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:44 Get A/D filter: -9.255963e+061 result=40 13:43:44 Get A/D value=-858993460 result=40 13:43:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:44 Aux= 13:43:44 Message to Camera, serial 53178 queued [UTC 2019-3-1 13:43:50] 13:44:21 Received message from Master: op=PointingHead serial=53191 13:44:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:44:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:44:21 Point started: ret=0 13:44:21 point_skyscan result=0 13:44:22 Check angles 13:44:22 SkyScan query 13:44:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 13:44:23 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 13:44:23 Check angles 13:44:23 SkyScan query 13:44:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.1<-14940 Statuses=0008 0009 13:44:23 Msec=750 True Az=112.995 Ze=-44.1 Az status=0008 Ze status=0009 13:44:24 Check angles 13:44:24 SkyScan query 13:44:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.07<-16338 Statuses=0008 0009 13:44:24 Msec=1500 True Az=112.995 Ze=-65.07 Az status=0008 Ze status=0009 13:44:24 Check angles 13:44:24 SkyScan query 13:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 13:44:25 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 13:44:25 Check angles 13:44:25 SkyScan query 13:44:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 13:44:26 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 13:44:26 Check angles 13:44:26 SkyScan query 13:44:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 13:44:26 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 13:44:27 Check angles 13:44:27 SkyScan query 13:44:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.73<-21982 Statuses=0008 0009 13:44:27 Msec=4500 True Az=112.995 Ze=-149.73 Az status=0008 Ze status=0009 13:44:27 Check angles 13:44:27 SkyScan query 13:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 13:44:28 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 13:44:28 Check angles 13:44:28 SkyScan query 13:44:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:44:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:44:29 Message to Master queued w/err=0: serial=53191 error=0 13:44:34 Received message from Master: op=Filter serial=53192 13:44:34 Color wheel filter change from 0 to 0 13:44:34 FLIGetFilterPos err=0 currentPosition=0 13:44:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:34 Filter is already there-color wheel unchanged 13:44:34 Received message from Master: op=Shutter serial=53193 13:44:34 Shutter LASER open 13:44:34 Received message from Camera: op=State serial=53195 13:44:34 GetSingleValue result=40 Value=cccccccc 13:44:34 SkyScan query 13:44:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:44:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:35 Parameters OK 13:44:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:35 Set A/D data flow result=40 13:44:35 Set A/D channel type result=40 13:44:35 Set A/D encoding result=40 13:44:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:35 Set channel filter=0.000000e+000 result=40 13:44:35 Config A/D Result=40 13:44:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:35 Get A/D filter: -9.255963e+061 result=40 13:44:35 Get A/D value=-858993460 result=40 13:44:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:35 Parameters OK 13:44:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:35 Set A/D data flow result=40 13:44:35 Set A/D channel type result=40 13:44:35 Set A/D encoding result=40 13:44:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:35 Set channel filter=0.000000e+000 result=40 13:44:35 Config A/D Result=40 13:44:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:35 Get A/D filter: -9.255963e+061 result=40 13:44:35 Get A/D value=-858993460 result=40 13:44:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:35 Aux= 13:44:35 Message to Camera, serial 53195 queued 13:44:43 Received message from Master: op=Shutter serial=53205 13:44:43 Shutter LASER close 13:44:44 Received message from Master: op=PointingHead serial=53209 13:44:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:44:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:44:44 Point started: ret=0 13:44:44 point_skyscan result=0 13:44:45 Check angles 13:44:45 SkyScan query 13:44:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 13:44:45 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 13:44:45 Check angles 13:44:45 SkyScan query 13:44:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 13:44:46 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 13:44:46 Check angles 13:44:46 SkyScan query 13:44:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 13:44:47 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 13:44:47 Check angles 13:44:47 SkyScan query 13:44:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 13:44:47 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 13:44:48 Check angles 13:44:48 SkyScan query 13:44:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.815<-15921 Statuses=0008 0009 13:44:48 Msec=3000 True Az=112.995 Ze=-58.815 Az status=0008 Ze status=0009 13:44:48 Check angles 13:44:48 SkyScan query 13:44:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.41<-14494 Statuses=0008 0009 13:44:49 Msec=3750 True Az=112.995 Ze=-37.41 Az status=0008 Ze status=0009 13:44:49 Check angles 13:44:49 SkyScan query 13:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.99<-13066 Statuses=0008 0009 13:44:50 Msec=4500 True Az=112.995 Ze=-15.99 Az status=0008 Ze status=0009 13:44:50 Check angles 13:44:50 SkyScan query 13:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=4.755<-11683 Statuses=0008 0009 13:44:51 Msec=5250 True Az=112.995 Ze=4.755 Az status=0008 Ze status=0009 13:44:51 Check angles 13:44:51 SkyScan query 13:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:44:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:44:51 Message to Master queued w/err=0: serial=53209 error=0 13:44:56 Received message from Master: op=Filter serial=53210 13:44:56 Color wheel filter change from 0 to 0 13:44:56 FLIGetFilterPos err=0 currentPosition=0 13:44:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:56 Filter is already there-color wheel unchanged 13:44:56 Received message from Master: op=Shutter serial=53211 13:44:56 Shutter LASER close 13:44:57 Received message from Camera: op=State serial=53213 13:44:57 GetSingleValue result=40 Value=cccccccc 13:44:57 SkyScan query 13:44:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:44:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:57 Parameters OK 13:44:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:57 Set A/D data flow result=40 13:44:57 Set A/D channel type result=40 13:44:57 Set A/D encoding result=40 13:44:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:57 Set channel filter=0.000000e+000 result=40 13:44:57 Config A/D Result=40 13:44:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:57 Get A/D filter: -9.255963e+061 result=40 13:44:57 Get A/D value=-858993460 result=40 13:44:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:57 Parameters OK 13:44:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:57 Set A/D data flow result=40 13:44:57 Set A/D channel type result=40 13:44:57 Set A/D encoding result=40 13:44:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:57 Set channel filter=0.000000e+000 result=40 13:44:57 Config A/D Result=40 13:44:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:57 Get A/D filter: -9.255963e+061 result=40 13:44:57 Get A/D value=-858993460 result=40 13:44:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:57 Aux= 13:44:57 Message to Camera, serial 53213 queued 13:45:34 Received message from Master: op=PointingHead serial=53226 13:45:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:45:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:45:34 Point started: ret=0 13:45:34 point_skyscan result=0 13:45:35 Check angles 13:45:35 SkyScan query 13:45:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:45:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:45:36 Message to Master queued w/err=0: serial=53226 error=0 13:45:41 Received message from Master: op=Filter serial=53227 13:45:41 Color wheel filter change from 0 to 0 13:45:41 FLIGetFilterPos err=0 currentPosition=0 13:45:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:41 Filter is already there-color wheel unchanged 13:45:41 Received message from Master: op=Shutter serial=53228 13:45:41 Shutter LASER close 13:45:41 Received message from Camera: op=State serial=53230 13:45:41 GetSingleValue result=40 Value=cccccccc 13:45:41 SkyScan query 13:45:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:45:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:41 Parameters OK 13:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:41 Set A/D data flow result=40 13:45:41 Set A/D channel type result=40 13:45:41 Set A/D encoding result=40 13:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:41 Set channel filter=0.000000e+000 result=40 13:45:41 Config A/D Result=40 13:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:41 Get A/D filter: -9.255963e+061 result=40 13:45:41 Get A/D value=-858993460 result=40 13:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:41 Parameters OK 13:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:41 Set A/D data flow result=40 13:45:41 Set A/D channel type result=40 13:45:41 Set A/D encoding result=40 13:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:41 Set channel filter=0.000000e+000 result=40 13:45:41 Config A/D Result=40 13:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:41 Get A/D filter: -9.255963e+061 result=40 13:45:41 Get A/D value=-858993460 result=40 13:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:41 Aux= 13:45:41 Message to Camera, serial 53230 queued 13:46:18 Received message from Master: op=PointingHead serial=53243 13:46:18 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:46:18 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:46:19 Point started: ret=0 13:46:19 point_skyscan result=0 13:46:19 Check angles 13:46:19 SkyScan query 13:46:20 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 13:46:20 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 13:46:20 Check angles 13:46:20 SkyScan query 13:46:21 SkyScan query done: ret=0 az=153.645<-10243 ze=-6.495<-12433 Statuses=0009 0008 13:46:21 Msec=750 True Az=153.645 Ze=-6.495 Az status=0009 Ze status=0008 13:46:21 Check angles 13:46:21 SkyScan query 13:46:21 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 13:46:21 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 13:46:22 Check angles 13:46:22 SkyScan query 13:46:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:46:22 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:46:22 Message to Master queued w/err=0: serial=53243 error=0 13:46:27 Received message from Master: op=Filter serial=53244 13:46:27 Color wheel filter change from 0 to 0 13:46:27 FLIGetFilterPos err=0 currentPosition=0 13:46:27 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:27 Filter is already there-color wheel unchanged 13:46:27 Received message from Master: op=Shutter serial=53245 13:46:27 Shutter LASER close 13:46:27 Received message from Camera: op=State serial=53247 13:46:27 GetSingleValue result=40 Value=cccccccc 13:46:27 SkyScan query 13:46:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:46:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:28 Parameters OK 13:46:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:28 Set A/D data flow result=40 13:46:28 Set A/D channel type result=40 13:46:28 Set A/D encoding result=40 13:46:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:28 Set channel filter=0.000000e+000 result=40 13:46:28 Config A/D Result=40 13:46:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:28 Get A/D filter: -9.255963e+061 result=40 13:46:28 Get A/D value=-858993460 result=40 13:46:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:28 Parameters OK 13:46:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:28 Set A/D data flow result=40 13:46:28 Set A/D channel type result=40 13:46:28 Set A/D encoding result=40 13:46:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:28 Set channel filter=0.000000e+000 result=40 13:46:28 Config A/D Result=40 13:46:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:28 Get A/D filter: -9.255963e+061 result=40 13:46:28 Get A/D value=-858993460 result=40 13:46:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:28 Aux= 13:46:28 Message to Camera, serial 53247 queued 13:47:04 Received message from Master: op=PointingHead serial=53259 13:47:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:47:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:47:04 Point started: ret=0 13:47:04 point_skyscan result=0 13:47:05 Check angles 13:47:05 SkyScan query 13:47:06 SkyScan query done: ret=0 az=153.135<-10209 ze=6.51<-11566 Statuses=0009 0008 13:47:06 Msec=0 True Az=153.135 Ze=6.51 Az status=0009 Ze status=0008 13:47:06 Check angles 13:47:06 SkyScan query 13:47:06 SkyScan query done: ret=0 az=135.18<-9012 ze=6.495<-11567 Statuses=0009 0008 13:47:06 Msec=750 True Az=135.18 Ze=6.495 Az status=0009 Ze status=0008 13:47:07 Check angles 13:47:07 SkyScan query 13:47:07 SkyScan query done: ret=0 az=117.405<-7827 ze=6.495<-11567 Statuses=0009 0008 13:47:07 Msec=1500 True Az=117.405 Ze=6.495 Az status=0009 Ze status=0008 13:47:07 Check angles 13:47:07 SkyScan query 13:47:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:47:08 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:47:08 Message to Master queued w/err=0: serial=53259 error=0 13:47:13 Received message from Master: op=Filter serial=53260 13:47:13 Color wheel filter change from 0 to 0 13:47:13 FLIGetFilterPos err=0 currentPosition=0 13:47:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:13 Filter is already there-color wheel unchanged 13:47:13 Received message from Master: op=Shutter serial=53261 13:47:13 Shutter LASER close 13:47:13 Received message from Camera: op=State serial=53263 13:47:13 GetSingleValue result=40 Value=cccccccc 13:47:13 SkyScan query 13:47:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:47:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:14 Parameters OK 13:47:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:14 Set A/D data flow result=40 13:47:14 Set A/D channel type result=40 13:47:14 Set A/D encoding result=40 13:47:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:14 Set channel filter=0.000000e+000 result=40 13:47:14 Config A/D Result=40 13:47:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:14 Get A/D filter: -9.255963e+061 result=40 13:47:14 Get A/D value=-858993460 result=40 13:47:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:14 Parameters OK 13:47:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:14 Set A/D data flow result=40 13:47:14 Set A/D channel type result=40 13:47:14 Set A/D encoding result=40 13:47:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:14 Set channel filter=0.000000e+000 result=40 13:47:14 Config A/D Result=40 13:47:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:14 Get A/D filter: -9.255963e+061 result=40 13:47:14 Get A/D value=-858993460 result=40 13:47:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:14 Aux= 13:47:14 Message to Camera, serial 53263 queued 13:47:51 Received message from Master: op=PointingHead serial=53276 13:47:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:47:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:47:51 Point started: ret=0 13:47:51 point_skyscan result=0 13:47:52 Check angles 13:47:52 SkyScan query 13:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 13:47:52 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 13:47:52 Check angles 13:47:52 SkyScan query 13:47:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.01<-14934 Statuses=0008 0009 13:47:53 Msec=750 True Az=112.995 Ze=-44.01 Az status=0008 Ze status=0009 13:47:53 Check angles 13:47:53 SkyScan query 13:47:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 13:47:54 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 13:47:54 Check angles 13:47:54 SkyScan query 13:47:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.935<-17729 Statuses=0008 0009 13:47:54 Msec=2250 True Az=112.995 Ze=-85.935 Az status=0008 Ze status=0009 13:47:55 Check angles 13:47:55 SkyScan query 13:47:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.86<-19124 Statuses=0008 0009 13:47:55 Msec=3000 True Az=112.995 Ze=-106.86 Az status=0008 Ze status=0009 13:47:55 Check angles 13:47:55 SkyScan query 13:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.83<-20522 Statuses=0008 0009 13:47:56 Msec=3750 True Az=112.995 Ze=-127.83 Az status=0008 Ze status=0009 13:47:56 Check angles 13:47:56 SkyScan query 13:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.785<-21919 Statuses=0008 0009 13:47:57 Msec=4500 True Az=112.995 Ze=-148.785 Az status=0008 Ze status=0009 13:47:57 Check angles 13:47:57 SkyScan query 13:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.71<-23314 Statuses=0008 0009 13:47:57 Msec=5250 True Az=112.995 Ze=-169.71 Az status=0008 Ze status=0009 13:47:58 Check angles 13:47:58 SkyScan query 13:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:47:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:47:58 Message to Master queued w/err=0: serial=53276 error=0 13:48:03 Received message from Master: op=Filter serial=53277 13:48:03 Color wheel filter change from 0 to 0 13:48:03 FLIGetFilterPos err=0 currentPosition=0 13:48:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:03 Filter is already there-color wheel unchanged 13:48:03 Received message from Master: op=Shutter serial=53278 13:48:03 Shutter LASER open 13:48:04 Received message from Camera: op=State serial=53280 13:48:04 GetSingleValue result=40 Value=cccccccc 13:48:04 SkyScan query 13:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:48:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:04 Parameters OK 13:48:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:04 Set A/D data flow result=40 13:48:04 Set A/D channel type result=40 13:48:04 Set A/D encoding result=40 13:48:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:04 Set channel filter=0.000000e+000 result=40 13:48:04 Config A/D Result=40 13:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:04 Get A/D filter: -9.255963e+061 result=40 13:48:04 Get A/D value=-858993460 result=40 13:48:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:04 Parameters OK 13:48:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:04 Set A/D data flow result=40 13:48:04 Set A/D channel type result=40 13:48:04 Set A/D encoding result=40 13:48:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:04 Set channel filter=0.000000e+000 result=40 13:48:04 Config A/D Result=40 13:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:04 Get A/D filter: -9.255963e+061 result=40 13:48:04 Get A/D value=-858993460 result=40 13:48:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:04 Aux= 13:48:04 Message to Camera, serial 53280 queued 13:48:13 Received message from Master: op=Shutter serial=53290 13:48:13 Shutter LASER close 13:48:13 Received message from Master: op=PointingHead serial=53294 13:48:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:48:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:48:13 Point started: ret=0 13:48:13 point_skyscan result=0 13:48:14 Check angles 13:48:14 SkyScan query 13:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 13:48:15 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 13:48:15 Check angles 13:48:15 SkyScan query 13:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 13:48:15 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 13:48:16 Check angles 13:48:16 SkyScan query 13:48:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.34<-18756 Statuses=0008 0009 13:48:16 Msec=1500 True Az=112.995 Ze=-101.34 Az status=0008 Ze status=0009 13:48:16 Check angles 13:48:16 SkyScan query 13:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.37<-17358 Statuses=0008 0009 13:48:17 Msec=2250 True Az=112.995 Ze=-80.37 Az status=0008 Ze status=0009 13:48:17 Check angles 13:48:17 SkyScan query 13:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.43<-15962 Statuses=0008 0009 13:48:18 Msec=3000 True Az=112.995 Ze=-59.43 Az status=0008 Ze status=0009 13:48:18 Check angles 13:48:18 SkyScan query 13:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.46<-14564 Statuses=0008 0009 13:48:18 Msec=3750 True Az=112.995 Ze=-38.46 Az status=0008 Ze status=0009 13:48:19 Check angles 13:48:19 SkyScan query 13:48:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.52<-13168 Statuses=0008 0009 13:48:19 Msec=4500 True Az=112.995 Ze=-17.52 Az status=0008 Ze status=0009 13:48:19 Check angles 13:48:19 SkyScan query 13:48:20 SkyScan query done: ret=0 az=112.995<-7533 ze=3.45<-11770 Statuses=0008 0009 13:48:20 Msec=5250 True Az=112.995 Ze=3.45 Az status=0008 Ze status=0009 13:48:20 Check angles 13:48:20 SkyScan query 13:48:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:48:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:48:21 Message to Master queued w/err=0: serial=53294 error=0 13:48:26 Received message from Master: op=Filter serial=53295 13:48:26 Color wheel filter change from 0 to 0 13:48:26 FLIGetFilterPos err=0 currentPosition=0 13:48:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:26 Filter is already there-color wheel unchanged 13:48:26 Received message from Master: op=Shutter serial=53296 13:48:26 Shutter LASER close 13:48:26 Received message from Camera: op=State serial=53298 13:48:26 GetSingleValue result=40 Value=cccccccc 13:48:26 SkyScan query 13:48:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:48:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:27 Parameters OK 13:48:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:27 Set A/D data flow result=40 13:48:27 Set A/D channel type result=40 13:48:27 Set A/D encoding result=40 13:48:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:27 Set channel filter=0.000000e+000 result=40 13:48:27 Config A/D Result=40 13:48:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:27 Get A/D filter: -9.255963e+061 result=40 13:48:27 Get A/D value=-858993460 result=40 13:48:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:27 Parameters OK 13:48:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:27 Set A/D data flow result=40 13:48:27 Set A/D channel type result=40 13:48:27 Set A/D encoding result=40 13:48:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:27 Set channel filter=0.000000e+000 result=40 13:48:27 Config A/D Result=40 13:48:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:27 Get A/D filter: -9.255963e+061 result=40 13:48:27 Get A/D value=-858993460 result=40 13:48:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:27 Aux= 13:48:27 Message to Camera, serial 53298 queued 13:49:03 Received message from Master: op=PointingHead serial=53311 13:49:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:49:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:49:04 Point started: ret=0 13:49:04 point_skyscan result=0 13:49:05 Check angles 13:49:05 SkyScan query 13:49:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:49:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:49:05 Message to Master queued w/err=0: serial=53311 error=0 13:49:10 Received message from Master: op=Filter serial=53312 13:49:10 Color wheel filter change from 0 to 0 13:49:10 FLIGetFilterPos err=0 currentPosition=0 13:49:10 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:10 Filter is already there-color wheel unchanged 13:49:10 Received message from Master: op=Shutter serial=53313 13:49:10 Shutter LASER close 13:49:10 Received message from Camera: op=State serial=53315 13:49:10 GetSingleValue result=40 Value=cccccccc 13:49:10 SkyScan query 13:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:49:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:11 Parameters OK 13:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:11 Set A/D data flow result=40 13:49:11 Set A/D channel type result=40 13:49:11 Set A/D encoding result=40 13:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:11 Set channel filter=0.000000e+000 result=40 13:49:11 Config A/D Result=40 13:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:11 Get A/D filter: -9.255963e+061 result=40 13:49:11 Get A/D value=-858993460 result=40 13:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:11 Parameters OK 13:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:11 Set A/D data flow result=40 13:49:11 Set A/D channel type result=40 13:49:11 Set A/D encoding result=40 13:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:11 Set channel filter=0.000000e+000 result=40 13:49:11 Config A/D Result=40 13:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:11 Get A/D filter: -9.255963e+061 result=40 13:49:11 Get A/D value=-858993460 result=40 13:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:11 Aux= 13:49:11 Message to Camera, serial 53315 queued 13:49:48 Received message from Master: op=PointingHead serial=53328 13:49:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:49:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:49:48 Point started: ret=0 13:49:48 point_skyscan result=0 13:49:49 Check angles 13:49:49 SkyScan query 13:49:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:49:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:49:49 Message to Master queued w/err=0: serial=53328 error=0 13:49:54 Received message from Master: op=Filter serial=53329 13:49:54 Color wheel filter change from 0 to 0 13:49:54 FLIGetFilterPos err=0 currentPosition=0 13:49:54 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:54 Filter is already there-color wheel unchanged 13:49:55 Received message from Master: op=Shutter serial=53330 13:49:55 Shutter LASER close 13:49:55 Received message from Camera: op=State serial=53332 13:49:55 GetSingleValue result=40 Value=cccccccc 13:49:55 SkyScan query 13:49:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:49:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:55 Parameters OK 13:49:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:55 Set A/D data flow result=40 13:49:55 Set A/D channel type result=40 13:49:55 Set A/D encoding result=40 13:49:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:55 Set channel filter=0.000000e+000 result=40 13:49:55 Config A/D Result=40 13:49:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:55 Get A/D filter: -9.255963e+061 result=40 13:49:55 Get A/D value=-858993460 result=40 13:49:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:55 Parameters OK 13:49:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:55 Set A/D data flow result=40 13:49:55 Set A/D channel type result=40 13:49:55 Set A/D encoding result=40 13:49:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:55 Set channel filter=0.000000e+000 result=40 13:49:55 Config A/D Result=40 13:49:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:55 Get A/D filter: -9.255963e+061 result=40 13:49:55 Get A/D value=-858993460 result=40 13:49:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:55 Aux= 13:49:55 Message to Camera, serial 53332 queued 13:50:32 Received message from Master: op=PointingHead serial=53345 13:50:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:50:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:50:32 Point started: ret=0 13:50:32 point_skyscan result=0 13:50:33 Check angles 13:50:33 SkyScan query 13:50:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:50:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:50:34 Message to Master queued w/err=0: serial=53345 error=0 13:50:39 Received message from Master: op=Filter serial=53346 13:50:39 Color wheel filter change from 0 to 0 13:50:39 FLIGetFilterPos err=0 currentPosition=0 13:50:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:39 Filter is already there-color wheel unchanged 13:50:39 Received message from Master: op=Shutter serial=53347 13:50:39 Shutter LASER close 13:50:39 Received message from Camera: op=State serial=53349 13:50:39 GetSingleValue result=40 Value=cccccccc 13:50:39 SkyScan query 13:50:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:50:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:39 Parameters OK 13:50:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:39 Set A/D data flow result=40 13:50:39 Set A/D channel type result=40 13:50:39 Set A/D encoding result=40 13:50:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:39 Set channel filter=0.000000e+000 result=40 13:50:39 Config A/D Result=40 13:50:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:39 Get A/D filter: -9.255963e+061 result=40 13:50:39 Get A/D value=-858993460 result=40 13:50:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:39 Parameters OK 13:50:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:39 Set A/D data flow result=40 13:50:39 Set A/D channel type result=40 13:50:39 Set A/D encoding result=40 13:50:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:39 Set channel filter=0.000000e+000 result=40 13:50:39 Config A/D Result=40 13:50:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:39 Get A/D filter: -9.255963e+061 result=40 13:50:39 Get A/D value=-858993460 result=40 13:50:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:39 Aux= 13:50:39 Message to Camera, serial 53349 queued 13:51:16 Received message from Master: op=PointingHead serial=53362 13:51:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:51:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:51:17 Point started: ret=0 13:51:17 point_skyscan result=0 13:51:17 Check angles 13:51:17 SkyScan query 13:51:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 13:51:18 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 13:51:18 Check angles 13:51:18 SkyScan query 13:51:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 13:51:19 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 13:51:19 Check angles 13:51:19 SkyScan query 13:51:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 13:51:19 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 13:51:20 Check angles 13:51:20 SkyScan query 13:51:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 13:51:20 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 13:51:20 Check angles 13:51:20 SkyScan query 13:51:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 13:51:21 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 13:51:21 Check angles 13:51:21 SkyScan query 13:51:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.235<-20549 Statuses=0008 0009 13:51:22 Msec=3750 True Az=112.995 Ze=-128.235 Az status=0008 Ze status=0009 13:51:22 Check angles 13:51:22 SkyScan query 13:51:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.205<-21947 Statuses=0008 0009 13:51:22 Msec=4500 True Az=112.995 Ze=-149.205 Az status=0008 Ze status=0009 13:51:23 Check angles 13:51:23 SkyScan query 13:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.145<-23343 Statuses=0008 0009 13:51:23 Msec=5250 True Az=112.995 Ze=-170.145 Az status=0008 Ze status=0009 13:51:23 Check angles 13:51:23 SkyScan query 13:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:51:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:51:24 Message to Master queued w/err=0: serial=53362 error=0 13:51:29 Received message from Master: op=Filter serial=53363 13:51:29 Color wheel filter change from 0 to 0 13:51:29 FLIGetFilterPos err=0 currentPosition=0 13:51:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:29 Filter is already there-color wheel unchanged 13:51:29 Received message from Master: op=Shutter serial=53364 13:51:29 Shutter LASER open 13:51:29 Received message from Camera: op=State serial=53366 13:51:29 GetSingleValue result=40 Value=cccccccc 13:51:29 SkyScan query 13:51:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:51:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:30 Parameters OK 13:51:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:30 Set A/D data flow result=40 13:51:30 Set A/D channel type result=40 13:51:30 Set A/D encoding result=40 13:51:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:30 Set channel filter=0.000000e+000 result=40 13:51:30 Config A/D Result=40 13:51:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:30 Get A/D filter: -9.255963e+061 result=40 13:51:30 Get A/D value=-858993460 result=40 13:51:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:30 Parameters OK 13:51:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:30 Set A/D data flow result=40 13:51:30 Set A/D channel type result=40 13:51:30 Set A/D encoding result=40 13:51:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:30 Set channel filter=0.000000e+000 result=40 13:51:30 Config A/D Result=40 13:51:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:30 Get A/D filter: -9.255963e+061 result=40 13:51:30 Get A/D value=-858993460 result=40 13:51:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:30 Aux= 13:51:30 Message to Camera, serial 53366 queued 13:51:37 Received message from Master: op=Shutter serial=53375 13:51:37 Shutter LASER close 13:51:38 Received message from Master: op=PointingHead serial=53379 13:51:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:51:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:51:38 Point started: ret=0 13:51:38 point_skyscan result=0 13:51:39 Check angles 13:51:39 SkyScan query 13:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 13:51:40 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 13:51:40 Check angles 13:51:40 SkyScan query 13:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 13:51:40 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 13:51:41 Check angles 13:51:41 SkyScan query 13:51:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.86<-18724 Statuses=0008 0009 13:51:41 Msec=1500 True Az=112.995 Ze=-100.86 Az status=0008 Ze status=0009 13:51:41 Check angles 13:51:41 SkyScan query 13:51:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.92<-17328 Statuses=0008 0009 13:51:42 Msec=2250 True Az=112.995 Ze=-79.92 Az status=0008 Ze status=0009 13:51:42 Check angles 13:51:42 SkyScan query 13:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.965<-15931 Statuses=0008 0009 13:51:43 Msec=3000 True Az=112.995 Ze=-58.965 Az status=0008 Ze status=0009 13:51:43 Check angles 13:51:43 SkyScan query 13:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 13:51:43 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 13:51:44 Check angles 13:51:44 SkyScan query 13:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.155<-13077 Statuses=0008 0009 13:51:44 Msec=4500 True Az=112.995 Ze=-16.155 Az status=0008 Ze status=0009 13:51:44 Check angles 13:51:44 SkyScan query 13:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=4.65<-11690 Statuses=0008 0009 13:51:45 Msec=5250 True Az=112.995 Ze=4.65 Az status=0008 Ze status=0009 13:51:45 Check angles 13:51:45 SkyScan query 13:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:51:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:51:46 Message to Master queued w/err=0: serial=53379 error=0 13:51:51 Received message from Master: op=Filter serial=53380 13:51:51 Color wheel filter change from 0 to 0 13:51:51 FLIGetFilterPos err=0 currentPosition=0 13:51:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:51 Filter is already there-color wheel unchanged 13:51:51 Received message from Master: op=Shutter serial=53381 13:51:51 Shutter LASER close 13:51:51 Received message from Camera: op=State serial=53383 13:51:51 GetSingleValue result=40 Value=cccccccc 13:51:51 SkyScan query 13:51:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:51:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:52 Parameters OK 13:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:52 Set A/D data flow result=40 13:51:52 Set A/D channel type result=40 13:51:52 Set A/D encoding result=40 13:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:52 Set channel filter=0.000000e+000 result=40 13:51:52 Config A/D Result=40 13:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:52 Get A/D filter: -9.255963e+061 result=40 13:51:52 Get A/D value=-858993460 result=40 13:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:52 Parameters OK 13:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:52 Set A/D data flow result=40 13:51:52 Set A/D channel type result=40 13:51:52 Set A/D encoding result=40 13:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:52 Set channel filter=0.000000e+000 result=40 13:51:52 Config A/D Result=40 13:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:52 Get A/D filter: -9.255963e+061 result=40 13:51:52 Get A/D value=-858993460 result=40 13:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:52 Aux= 13:51:52 Message to Camera, serial 53383 queued 13:52:28 Received message from Master: op=PointingHead serial=53396 13:52:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:52:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:52:29 Point started: ret=0 13:52:29 point_skyscan result=0 13:52:29 Check angles 13:52:29 SkyScan query 13:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:52:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:52:30 Message to Master queued w/err=0: serial=53396 error=0 13:52:35 Received message from Master: op=Filter serial=53397 13:52:35 Color wheel filter change from 0 to 0 13:52:35 FLIGetFilterPos err=0 currentPosition=0 13:52:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:35 Filter is already there-color wheel unchanged 13:52:35 Received message from Master: op=Shutter serial=53398 13:52:35 Shutter LASER close 13:52:35 Received message from Camera: op=State serial=53400 13:52:35 GetSingleValue result=40 Value=cccccccc 13:52:35 SkyScan query 13:52:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:52:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:36 Parameters OK 13:52:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:36 Set A/D data flow result=40 13:52:36 Set A/D channel type result=40 13:52:36 Set A/D encoding result=40 13:52:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:36 Set channel filter=0.000000e+000 result=40 13:52:36 Config A/D Result=40 13:52:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:36 Get A/D filter: -9.255963e+061 result=40 13:52:36 Get A/D value=-858993460 result=40 13:52:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:36 Parameters OK 13:52:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:36 Set A/D data flow result=40 13:52:36 Set A/D channel type result=40 13:52:36 Set A/D encoding result=40 13:52:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:36 Set channel filter=0.000000e+000 result=40 13:52:36 Config A/D Result=40 13:52:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:36 Get A/D filter: -9.255963e+061 result=40 13:52:36 Get A/D value=-858993460 result=40 13:52:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:36 Aux= 13:52:36 Message to Camera, serial 53400 queued 13:53:13 Received message from Master: op=PointingHead serial=53413 13:53:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:53:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:53:13 Point started: ret=0 13:53:13 point_skyscan result=0 13:53:14 Check angles 13:53:14 SkyScan query 13:53:14 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 13:53:14 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 13:53:15 Check angles 13:53:15 SkyScan query 13:53:15 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 13:53:15 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 13:53:15 Check angles 13:53:15 SkyScan query 13:53:16 SkyScan query done: ret=0 az=171.285<-11419 ze=-6.495<-12433 Statuses=0009 0008 13:53:16 Msec=1500 True Az=171.285 Ze=-6.495 Az status=0009 Ze status=0008 13:53:16 Check angles 13:53:16 SkyScan query 13:53:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:53:17 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:53:17 Message to Master queued w/err=0: serial=53413 error=0 13:53:22 Received message from Master: op=Filter serial=53414 13:53:22 Color wheel filter change from 0 to 0 13:53:22 FLIGetFilterPos err=0 currentPosition=0 13:53:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:22 Filter is already there-color wheel unchanged 13:53:22 Received message from Master: op=Shutter serial=53415 13:53:22 Shutter LASER close 13:53:22 Received message from Camera: op=State serial=53417 13:53:22 GetSingleValue result=40 Value=cccccccc 13:53:22 SkyScan query 13:53:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:53:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:22 Parameters OK 13:53:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:22 Set A/D data flow result=40 13:53:22 Set A/D channel type result=40 13:53:22 Set A/D encoding result=40 13:53:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:22 Set channel filter=0.000000e+000 result=40 13:53:22 Config A/D Result=40 13:53:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:22 Get A/D filter: -9.255963e+061 result=40 13:53:22 Get A/D value=-858993460 result=40 13:53:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:22 Parameters OK 13:53:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:22 Set A/D data flow result=40 13:53:22 Set A/D channel type result=40 13:53:22 Set A/D encoding result=40 13:53:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:22 Set channel filter=0.000000e+000 result=40 13:53:22 Config A/D Result=40 13:53:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:22 Get A/D filter: -9.255963e+061 result=40 13:53:22 Get A/D value=-858993460 result=40 13:53:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:22 Aux= 13:53:22 Message to Camera, serial 53417 queued 13:53:59 Received message from Master: op=PointingHead serial=53430 13:53:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:53:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:54:00 Point started: ret=0 13:54:00 point_skyscan result=0 13:54:00 Check angles 13:54:00 SkyScan query 13:54:01 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 13:54:01 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 13:54:01 Check angles 13:54:01 SkyScan query 13:54:02 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 13:54:02 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 13:54:02 Check angles 13:54:02 SkyScan query 13:54:02 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 13:54:02 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 13:54:03 Check angles 13:54:03 SkyScan query 13:54:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:54:03 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:54:03 Message to Master queued w/err=0: serial=53430 error=0 13:54:08 Received message from Master: op=Filter serial=53431 13:54:08 Color wheel filter change from 0 to 0 13:54:08 FLIGetFilterPos err=0 currentPosition=0 13:54:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:08 Filter is already there-color wheel unchanged 13:54:08 Received message from Master: op=Shutter serial=53432 13:54:08 Shutter LASER close 13:54:08 Received message from Camera: op=State serial=53434 13:54:08 GetSingleValue result=40 Value=cccccccc 13:54:08 SkyScan query 13:54:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:54:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:09 Parameters OK 13:54:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:09 Set A/D data flow result=40 13:54:09 Set A/D channel type result=40 13:54:09 Set A/D encoding result=40 13:54:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:09 Set channel filter=0.000000e+000 result=40 13:54:09 Config A/D Result=40 13:54:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:09 Get A/D filter: -9.255963e+061 result=40 13:54:09 Get A/D value=-858993460 result=40 13:54:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:09 Parameters OK 13:54:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:09 Set A/D data flow result=40 13:54:09 Set A/D channel type result=40 [UTC 2019-3-1 13:54:09] 13:54:09 Set A/D encoding result=40 13:54:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:09 Set channel filter=0.000000e+000 result=40 13:54:09 Config A/D Result=40 13:54:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:09 Get A/D filter: -9.255963e+061 result=40 13:54:09 Get A/D value=-858993460 result=40 13:54:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:09 Aux= 13:54:09 Message to Camera, serial 53434 queued 13:54:46 Received message from Master: op=PointingHead serial=53447 13:54:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:54:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:54:46 Point started: ret=0 13:54:46 point_skyscan result=0 13:54:47 Check angles 13:54:47 SkyScan query 13:54:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 13:54:47 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 13:54:48 Check angles 13:54:48 SkyScan query 13:54:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 13:54:48 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 13:54:48 Check angles 13:54:48 SkyScan query 13:54:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.79<-16386 Statuses=0008 0009 13:54:49 Msec=1500 True Az=112.995 Ze=-65.79 Az status=0008 Ze status=0009 13:54:49 Check angles 13:54:49 SkyScan query 13:54:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.165<-17811 Statuses=0008 0009 13:54:50 Msec=2250 True Az=112.995 Ze=-87.165 Az status=0008 Ze status=0009 13:54:50 Check angles 13:54:50 SkyScan query 13:54:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.12<-19208 Statuses=0008 0009 13:54:51 Msec=3000 True Az=112.995 Ze=-108.12 Az status=0008 Ze status=0009 13:54:51 Check angles 13:54:51 SkyScan query 13:54:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.51<-20634 Statuses=0008 0009 13:54:51 Msec=3750 True Az=112.995 Ze=-129.51 Az status=0008 Ze status=0009 13:54:51 Check angles 13:54:51 SkyScan query 13:54:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.885<-22059 Statuses=0008 0009 13:54:52 Msec=4500 True Az=112.995 Ze=-150.885 Az status=0008 Ze status=0009 13:54:52 Check angles 13:54:52 SkyScan query 13:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.54<-23436 Statuses=0008 0009 13:54:53 Msec=5250 True Az=112.995 Ze=-171.54 Az status=0008 Ze status=0009 13:54:53 Check angles 13:54:53 SkyScan query 13:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:54:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:54:54 Message to Master queued w/err=0: serial=53447 error=0 13:54:59 Received message from Master: op=Filter serial=53448 13:54:59 Color wheel filter change from 0 to 0 13:54:59 FLIGetFilterPos err=0 currentPosition=0 13:54:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:59 Filter is already there-color wheel unchanged 13:54:59 Received message from Master: op=Shutter serial=53449 13:54:59 Shutter LASER open 13:54:59 Received message from Camera: op=State serial=53451 13:54:59 GetSingleValue result=40 Value=cccccccc 13:54:59 SkyScan query 13:54:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:54:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:59 Parameters OK 13:54:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:59 Set A/D data flow result=40 13:54:59 Set A/D channel type result=40 13:54:59 Set A/D encoding result=40 13:54:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:59 Set channel filter=0.000000e+000 result=40 13:54:59 Config A/D Result=40 13:54:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:59 Get A/D filter: -9.255963e+061 result=40 13:54:59 Get A/D value=-858993460 result=40 13:54:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:59 Parameters OK 13:54:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:59 Set A/D data flow result=40 13:54:59 Set A/D channel type result=40 13:54:59 Set A/D encoding result=40 13:54:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:59 Set channel filter=0.000000e+000 result=40 13:54:59 Config A/D Result=40 13:54:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:59 Get A/D filter: -9.255963e+061 result=40 13:54:59 Get A/D value=-858993460 result=40 13:54:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:59 Aux= 13:54:59 Message to Camera, serial 53451 queued 13:55:08 Received message from Master: op=Shutter serial=53461 13:55:08 Shutter LASER close 13:55:08 Received message from Master: op=PointingHead serial=53465 13:55:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:55:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:55:09 Point started: ret=0 13:55:09 point_skyscan result=0 13:55:09 Check angles 13:55:09 SkyScan query 13:55:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 13:55:10 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 13:55:10 Check angles 13:55:10 SkyScan query 13:55:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 13:55:11 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 13:55:11 Check angles 13:55:11 SkyScan query 13:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 13:55:12 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 13:55:12 Check angles 13:55:12 SkyScan query 13:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.995<-17333 Statuses=0008 0009 13:55:12 Msec=2250 True Az=112.995 Ze=-79.995 Az status=0008 Ze status=0009 13:55:12 Check angles 13:55:12 SkyScan query 13:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 13:55:13 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 13:55:13 Check angles 13:55:13 SkyScan query 13:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.07<-14538 Statuses=0008 0009 13:55:14 Msec=3750 True Az=112.995 Ze=-38.07 Az status=0008 Ze status=0009 13:55:14 Check angles 13:55:14 SkyScan query 13:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.68<-13112 Statuses=0008 0009 13:55:15 Msec=4500 True Az=112.995 Ze=-16.68 Az status=0008 Ze status=0009 13:55:15 Check angles 13:55:15 SkyScan query 13:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=4.23<-11718 Statuses=0008 0009 13:55:15 Msec=5250 True Az=112.995 Ze=4.23 Az status=0008 Ze status=0009 13:55:15 Check angles 13:55:15 SkyScan query 13:55:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:55:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:55:16 Message to Master queued w/err=0: serial=53465 error=0 13:55:21 Received message from Master: op=Filter serial=53466 13:55:21 Color wheel filter change from 0 to 0 13:55:21 FLIGetFilterPos err=0 currentPosition=0 13:55:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:21 Filter is already there-color wheel unchanged 13:55:21 Received message from Master: op=Shutter serial=53467 13:55:21 Shutter LASER close 13:55:21 Received message from Camera: op=State serial=53469 13:55:21 GetSingleValue result=40 Value=cccccccc 13:55:21 SkyScan query 13:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:55:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:22 Parameters OK 13:55:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:22 Set A/D data flow result=40 13:55:22 Set A/D channel type result=40 13:55:22 Set A/D encoding result=40 13:55:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:22 Set channel filter=0.000000e+000 result=40 13:55:22 Config A/D Result=40 13:55:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:22 Get A/D filter: -9.255963e+061 result=40 13:55:22 Get A/D value=-858993460 result=40 13:55:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:22 Parameters OK 13:55:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:22 Set A/D data flow result=40 13:55:22 Set A/D channel type result=40 13:55:22 Set A/D encoding result=40 13:55:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:22 Set channel filter=0.000000e+000 result=40 13:55:22 Config A/D Result=40 13:55:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:22 Get A/D filter: -9.255963e+061 result=40 13:55:22 Get A/D value=-858993460 result=40 13:55:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:22 Aux= 13:55:22 Message to Camera, serial 53469 queued 13:55:59 Received message from Master: op=PointingHead serial=53482 13:55:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:55:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:55:59 Point started: ret=0 13:55:59 point_skyscan result=0 13:56:00 Check angles 13:56:00 SkyScan query 13:56:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:56:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:56:01 Message to Master queued w/err=0: serial=53482 error=0 13:56:06 Received message from Master: op=Filter serial=53483 13:56:06 Color wheel filter change from 0 to 0 13:56:06 FLIGetFilterPos err=0 currentPosition=0 13:56:06 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:06 Filter is already there-color wheel unchanged 13:56:06 Received message from Master: op=Shutter serial=53484 13:56:06 Shutter LASER close 13:56:06 Received message from Camera: op=State serial=53486 13:56:06 GetSingleValue result=40 Value=cccccccc 13:56:06 SkyScan query 13:56:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:56:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:06 Parameters OK 13:56:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:06 Set A/D data flow result=40 13:56:06 Set A/D channel type result=40 13:56:06 Set A/D encoding result=40 13:56:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:06 Set channel filter=0.000000e+000 result=40 13:56:06 Config A/D Result=40 13:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:06 Get A/D filter: -9.255963e+061 result=40 13:56:06 Get A/D value=-858993460 result=40 13:56:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:06 Parameters OK 13:56:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:06 Set A/D data flow result=40 13:56:06 Set A/D channel type result=40 13:56:06 Set A/D encoding result=40 13:56:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:06 Set channel filter=0.000000e+000 result=40 13:56:06 Config A/D Result=40 13:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:06 Get A/D filter: -9.255963e+061 result=40 13:56:06 Get A/D value=-858993460 result=40 13:56:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:06 Aux= 13:56:06 Message to Camera, serial 53486 queued 13:56:43 Received message from Master: op=PointingHead serial=53499 13:56:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:56:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:56:44 Point started: ret=0 13:56:44 point_skyscan result=0 13:56:44 Check angles 13:56:44 SkyScan query 13:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:56:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:56:45 Message to Master queued w/err=0: serial=53499 error=0 13:56:50 Received message from Master: op=Filter serial=53500 13:56:50 Color wheel filter change from 0 to 0 13:56:50 FLIGetFilterPos err=0 currentPosition=0 13:56:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:50 Filter is already there-color wheel unchanged 13:56:50 Received message from Master: op=Shutter serial=53501 13:56:50 Shutter LASER close 13:56:50 Received message from Camera: op=State serial=53503 13:56:50 GetSingleValue result=40 Value=cccccccc 13:56:50 SkyScan query 13:56:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:56:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:51 Parameters OK 13:56:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:51 Set A/D data flow result=40 13:56:51 Set A/D channel type result=40 13:56:51 Set A/D encoding result=40 13:56:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:51 Set channel filter=0.000000e+000 result=40 13:56:51 Config A/D Result=40 13:56:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:51 Get A/D filter: -9.255963e+061 result=40 13:56:51 Get A/D value=-858993460 result=40 13:56:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:51 Parameters OK 13:56:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:51 Set A/D data flow result=40 13:56:51 Set A/D channel type result=40 13:56:51 Set A/D encoding result=40 13:56:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:51 Set channel filter=0.000000e+000 result=40 13:56:51 Config A/D Result=40 13:56:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:51 Get A/D filter: -9.255963e+061 result=40 13:56:51 Get A/D value=-858993460 result=40 13:56:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:51 Aux= 13:56:51 Message to Camera, serial 53503 queued 13:57:27 Received message from Master: op=PointingHead serial=53516 13:57:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:57:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:57:28 Point started: ret=0 13:57:28 point_skyscan result=0 13:57:29 Check angles 13:57:29 SkyScan query 13:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:57:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:57:29 Message to Master queued w/err=0: serial=53516 error=0 13:57:34 Received message from Master: op=Filter serial=53517 13:57:34 Color wheel filter change from 0 to 0 13:57:34 FLIGetFilterPos err=0 currentPosition=0 13:57:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:34 Filter is already there-color wheel unchanged 13:57:34 Received message from Master: op=Shutter serial=53518 13:57:34 Shutter LASER close 13:57:34 Received message from Camera: op=State serial=53520 13:57:34 GetSingleValue result=40 Value=cccccccc 13:57:34 SkyScan query 13:57:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:57:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:35 Parameters OK 13:57:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:35 Set A/D data flow result=40 13:57:35 Set A/D channel type result=40 13:57:35 Set A/D encoding result=40 13:57:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:35 Set channel filter=0.000000e+000 result=40 13:57:35 Config A/D Result=40 13:57:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:35 Get A/D filter: -9.255963e+061 result=40 13:57:35 Get A/D value=-858993460 result=40 13:57:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:35 Parameters OK 13:57:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:35 Set A/D data flow result=40 13:57:35 Set A/D channel type result=40 13:57:35 Set A/D encoding result=40 13:57:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:35 Set channel filter=0.000000e+000 result=40 13:57:35 Config A/D Result=40 13:57:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:35 Get A/D filter: -9.255963e+061 result=40 13:57:35 Get A/D value=-858993460 result=40 13:57:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:35 Aux= 13:57:35 Message to Camera, serial 53520 queued 13:58:12 Received message from Master: op=PointingHead serial=53533 13:58:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:58:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:58:12 Point started: ret=0 13:58:12 point_skyscan result=0 13:58:13 Check angles 13:58:13 SkyScan query 13:58:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 13:58:13 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 13:58:14 Check angles 13:58:14 SkyScan query 13:58:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 13:58:14 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 13:58:14 Check angles 13:58:14 SkyScan query 13:58:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 13:58:15 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 13:58:15 Check angles 13:58:15 SkyScan query 13:58:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.76<-17784 Statuses=0008 0009 13:58:16 Msec=2250 True Az=112.995 Ze=-86.76 Az status=0008 Ze status=0009 13:58:16 Check angles 13:58:16 SkyScan query 13:58:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.15<-19210 Statuses=0008 0009 13:58:17 Msec=3000 True Az=112.995 Ze=-108.15 Az status=0008 Ze status=0009 13:58:17 Check angles 13:58:17 SkyScan query 13:58:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.54<-20636 Statuses=0008 0009 13:58:17 Msec=3750 True Az=112.995 Ze=-129.54 Az status=0008 Ze status=0009 13:58:17 Check angles 13:58:17 SkyScan query 13:58:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.48<-22032 Statuses=0008 0009 13:58:18 Msec=4500 True Az=112.995 Ze=-150.48 Az status=0008 Ze status=0009 13:58:18 Check angles 13:58:18 SkyScan query 13:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.225<-23415 Statuses=0008 0009 13:58:19 Msec=5250 True Az=112.995 Ze=-171.225 Az status=0008 Ze status=0009 13:58:19 Check angles 13:58:19 SkyScan query 13:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:58:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:58:20 Message to Master queued w/err=0: serial=53533 error=0 13:58:25 Received message from Master: op=Filter serial=53534 13:58:25 Color wheel filter change from 0 to 0 13:58:25 FLIGetFilterPos err=0 currentPosition=0 13:58:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:25 Filter is already there-color wheel unchanged 13:58:25 Received message from Master: op=Shutter serial=53535 13:58:25 Shutter LASER open 13:58:25 Received message from Camera: op=State serial=53537 13:58:25 GetSingleValue result=40 Value=cccccccc 13:58:25 SkyScan query 13:58:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:58:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:25 Parameters OK 13:58:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:25 Set A/D data flow result=40 13:58:25 Set A/D channel type result=40 13:58:25 Set A/D encoding result=40 13:58:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:25 Set channel filter=0.000000e+000 result=40 13:58:25 Config A/D Result=40 13:58:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:25 Get A/D filter: -9.255963e+061 result=40 13:58:25 Get A/D value=-858993460 result=40 13:58:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:25 Parameters OK 13:58:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:25 Set A/D data flow result=40 13:58:25 Set A/D channel type result=40 13:58:25 Set A/D encoding result=40 13:58:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:25 Set channel filter=0.000000e+000 result=40 13:58:25 Config A/D Result=40 13:58:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:25 Get A/D filter: -9.255963e+061 result=40 13:58:25 Get A/D value=-858993460 result=40 13:58:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:25 Aux= 13:58:25 Message to Camera, serial 53537 queued 13:58:34 Received message from Master: op=Shutter serial=53547 13:58:34 Shutter LASER close 13:58:34 Received message from Master: op=PointingHead serial=53551 13:58:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:58:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:58:35 Point started: ret=0 13:58:35 point_skyscan result=0 13:58:36 Check angles 13:58:36 SkyScan query 13:58:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.86<-21524 Statuses=0008 0009 13:58:36 Msec=0 True Az=112.995 Ze=-142.86 Az status=0008 Ze status=0009 13:58:36 Check angles 13:58:36 SkyScan query 13:58:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.5<-20100 Statuses=0008 0009 13:58:37 Msec=750 True Az=112.995 Ze=-121.5 Az status=0008 Ze status=0009 13:58:37 Check angles 13:58:37 SkyScan query 13:58:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.53<-18702 Statuses=0008 0009 13:58:38 Msec=1500 True Az=112.995 Ze=-100.53 Az status=0008 Ze status=0009 13:58:38 Check angles 13:58:38 SkyScan query 13:58:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.575<-17305 Statuses=0008 0009 13:58:38 Msec=2250 True Az=112.995 Ze=-79.575 Az status=0008 Ze status=0009 13:58:39 Check angles 13:58:39 SkyScan query 13:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.14<-15876 Statuses=0008 0009 13:58:39 Msec=3000 True Az=112.995 Ze=-58.14 Az status=0008 Ze status=0009 13:58:39 Check angles 13:58:39 SkyScan query 13:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.215<-14481 Statuses=0008 0009 13:58:40 Msec=3750 True Az=112.995 Ze=-37.215 Az status=0008 Ze status=0009 13:58:40 Check angles 13:58:40 SkyScan query 13:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.245<-13083 Statuses=0008 0009 13:58:41 Msec=4500 True Az=112.995 Ze=-16.245 Az status=0008 Ze status=0009 13:58:41 Check angles 13:58:41 SkyScan query 13:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=4.89<-11674 Statuses=0008 0009 13:58:41 Msec=5250 True Az=112.995 Ze=4.89 Az status=0008 Ze status=0009 13:58:42 Check angles 13:58:42 SkyScan query 13:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:58:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:58:42 Message to Master queued w/err=0: serial=53551 error=0 13:58:47 Received message from Master: op=Filter serial=53552 13:58:47 Color wheel filter change from 0 to 0 13:58:47 FLIGetFilterPos err=0 currentPosition=0 13:58:47 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:47 Filter is already there-color wheel unchanged 13:58:47 Received message from Master: op=Shutter serial=53553 13:58:47 Shutter LASER close 13:58:48 Received message from Camera: op=State serial=53555 13:58:48 GetSingleValue result=40 Value=cccccccc 13:58:48 SkyScan query 13:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:58:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:48 Parameters OK 13:58:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:48 Set A/D data flow result=40 13:58:48 Set A/D channel type result=40 13:58:48 Set A/D encoding result=40 13:58:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:48 Set channel filter=0.000000e+000 result=40 13:58:48 Config A/D Result=40 13:58:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:48 Get A/D filter: -9.255963e+061 result=40 13:58:48 Get A/D value=-858993460 result=40 13:58:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:48 Parameters OK 13:58:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:48 Set A/D data flow result=40 13:58:48 Set A/D channel type result=40 13:58:48 Set A/D encoding result=40 13:58:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:48 Set channel filter=0.000000e+000 result=40 13:58:48 Config A/D Result=40 13:58:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:48 Get A/D filter: -9.255963e+061 result=40 13:58:48 Get A/D value=-858993460 result=40 13:58:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:48 Aux= 13:58:48 Message to Camera, serial 53555 queued 13:59:24 Received message from Master: op=PointingHead serial=53567 13:59:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:59:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:59:24 Point started: ret=0 13:59:24 point_skyscan result=0 13:59:25 Check angles 13:59:25 SkyScan query 13:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:59:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:59:26 Message to Master queued w/err=0: serial=53567 error=0 13:59:31 Received message from Master: op=Filter serial=53568 13:59:31 Color wheel filter change from 0 to 0 13:59:31 FLIGetFilterPos err=0 currentPosition=0 13:59:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:31 Filter is already there-color wheel unchanged 13:59:31 Received message from Master: op=Shutter serial=53569 13:59:31 Shutter LASER close 13:59:31 Received message from Camera: op=State serial=53571 13:59:31 GetSingleValue result=40 Value=cccccccc 13:59:31 SkyScan query 13:59:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:59:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:31 Parameters OK 13:59:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:31 Set A/D data flow result=40 13:59:31 Set A/D channel type result=40 13:59:31 Set A/D encoding result=40 13:59:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:31 Set channel filter=0.000000e+000 result=40 13:59:31 Config A/D Result=40 13:59:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:31 Get A/D filter: -9.255963e+061 result=40 13:59:31 Get A/D value=-858993460 result=40 13:59:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:31 Parameters OK 13:59:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:31 Set A/D data flow result=40 13:59:31 Set A/D channel type result=40 13:59:31 Set A/D encoding result=40 13:59:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:31 Set channel filter=0.000000e+000 result=40 13:59:31 Config A/D Result=40 13:59:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:31 Get A/D filter: -9.255963e+061 result=40 13:59:31 Get A/D value=-858993460 result=40 13:59:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:31 Aux= 13:59:31 Message to Camera, serial 53571 queued 14:00:08 Received message from Master: op=PointingHead serial=53584 14:00:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:00:08 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:00:09 Point started: ret=0 14:00:09 point_skyscan result=0 14:00:09 Check angles 14:00:09 SkyScan query 14:00:10 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 14:00:10 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 14:00:10 Check angles 14:00:10 SkyScan query 14:00:11 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.495<-12433 Statuses=0009 0008 14:00:11 Msec=750 True Az=153.345 Ze=-6.495 Az status=0009 Ze status=0008 14:00:11 Check angles 14:00:11 SkyScan query 14:00:11 SkyScan query done: ret=0 az=170.82<-11388 ze=-6.495<-12433 Statuses=0009 0008 14:00:11 Msec=1500 True Az=170.82 Ze=-6.495 Az status=0009 Ze status=0008 14:00:12 Check angles 14:00:12 SkyScan query 14:00:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:00:12 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:00:12 Message to Master queued w/err=0: serial=53584 error=0 14:00:17 Received message from Master: op=Filter serial=53585 14:00:17 Color wheel filter change from 0 to 0 14:00:17 FLIGetFilterPos err=0 currentPosition=0 14:00:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:17 Filter is already there-color wheel unchanged 14:00:17 Received message from Master: op=Shutter serial=53586 14:00:17 Shutter LASER close 14:00:17 Received message from Camera: op=State serial=53588 14:00:17 GetSingleValue result=40 Value=cccccccc 14:00:17 SkyScan query 14:00:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:00:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:18 Parameters OK 14:00:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:18 Set A/D data flow result=40 14:00:18 Set A/D channel type result=40 14:00:18 Set A/D encoding result=40 14:00:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:18 Set channel filter=0.000000e+000 result=40 14:00:18 Config A/D Result=40 14:00:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:18 Get A/D filter: -9.255963e+061 result=40 14:00:18 Get A/D value=-858993460 result=40 14:00:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:18 Parameters OK 14:00:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:18 Set A/D data flow result=40 14:00:18 Set A/D channel type result=40 14:00:18 Set A/D encoding result=40 14:00:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:18 Set channel filter=0.000000e+000 result=40 14:00:18 Config A/D Result=40 14:00:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:18 Get A/D filter: -9.255963e+061 result=40 14:00:18 Get A/D value=-858993460 result=40 14:00:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:18 Aux= 14:00:18 Message to Camera, serial 53588 queued 14:00:55 Received message from Master: op=PointingHead serial=53601 14:00:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:00:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:00:55 Point started: ret=0 14:00:55 point_skyscan result=0 14:00:56 Check angles 14:00:56 SkyScan query 14:00:57 SkyScan query done: ret=0 az=153.195<-10213 ze=6.51<-11566 Statuses=0009 0008 14:00:57 Msec=0 True Az=153.195 Ze=6.51 Az status=0009 Ze status=0008 14:00:57 Check angles 14:00:57 SkyScan query 14:00:57 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 14:00:57 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 14:00:57 Check angles 14:00:57 SkyScan query 14:00:58 SkyScan query done: ret=0 az=117.9<-7860 ze=6.495<-11567 Statuses=0009 0008 14:00:58 Msec=1500 True Az=117.9 Ze=6.495 Az status=0009 Ze status=0008 14:00:58 Check angles 14:00:58 SkyScan query 14:00:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:00:59 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:00:59 Message to Master queued w/err=0: serial=53601 error=0 14:01:04 Received message from Master: op=Filter serial=53602 14:01:04 Color wheel filter change from 0 to 0 14:01:04 FLIGetFilterPos err=0 currentPosition=0 14:01:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:04 Filter is already there-color wheel unchanged 14:01:04 Received message from Master: op=Shutter serial=53603 14:01:04 Shutter LASER close 14:01:04 Received message from Camera: op=State serial=53605 14:01:04 GetSingleValue result=40 Value=cccccccc 14:01:04 SkyScan query 14:01:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:01:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:05 Parameters OK 14:01:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:05 Set A/D data flow result=40 14:01:05 Set A/D channel type result=40 14:01:05 Set A/D encoding result=40 14:01:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:05 Set channel filter=0.000000e+000 result=40 14:01:05 Config A/D Result=40 14:01:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:05 Get A/D filter: -9.255963e+061 result=40 14:01:05 Get A/D value=-858993460 result=40 14:01:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:05 Parameters OK 14:01:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:05 Set A/D data flow result=40 14:01:05 Set A/D channel type result=40 14:01:05 Set A/D encoding result=40 14:01:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:05 Set channel filter=0.000000e+000 result=40 14:01:05 Config A/D Result=40 14:01:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:05 Get A/D filter: -9.255963e+061 result=40 14:01:05 Get A/D value=-858993460 result=40 14:01:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:05 Aux= 14:01:05 Message to Camera, serial 53605 queued 14:01:41 Received message from Master: op=PointingHead serial=53618 14:01:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:01:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:01:42 Point started: ret=0 14:01:42 point_skyscan result=0 14:01:43 Check angles 14:01:43 SkyScan query 14:01:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 14:01:43 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 14:01:43 Check angles 14:01:43 SkyScan query 14:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 14:01:44 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 14:01:44 Check angles 14:01:44 SkyScan query 14:01:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 14:01:45 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 14:01:45 Check angles 14:01:45 SkyScan query 14:01:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 14:01:45 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 14:01:46 Check angles 14:01:46 SkyScan query 14:01:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 14:01:46 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 14:01:46 Check angles 14:01:46 SkyScan query 14:01:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.165<-20611 Statuses=0008 0009 14:01:47 Msec=3750 True Az=112.995 Ze=-129.165 Az status=0008 Ze status=0009 14:01:47 Check angles 14:01:47 SkyScan query 14:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.555<-22037 Statuses=0008 0009 14:01:48 Msec=4500 True Az=112.995 Ze=-150.555 Az status=0008 Ze status=0009 14:01:48 Check angles 14:01:48 SkyScan query 14:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0008 0009 14:01:48 Msec=5250 True Az=112.995 Ze=-171.3 Az status=0008 Ze status=0009 14:01:49 Check angles 14:01:49 SkyScan query 14:01:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:01:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:01:49 Message to Master queued w/err=0: serial=53618 error=0 14:01:54 Received message from Master: op=Filter serial=53619 14:01:54 Color wheel filter change from 0 to 0 14:01:54 FLIGetFilterPos err=0 currentPosition=0 14:01:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:54 Filter is already there-color wheel unchanged 14:01:54 Received message from Master: op=Shutter serial=53620 14:01:54 Shutter LASER open 14:01:55 Received message from Camera: op=State serial=53622 14:01:55 GetSingleValue result=40 Value=cccccccc 14:01:55 SkyScan query 14:01:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:01:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:55 Parameters OK 14:01:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:55 Set A/D data flow result=40 14:01:55 Set A/D channel type result=40 14:01:55 Set A/D encoding result=40 14:01:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:55 Set channel filter=0.000000e+000 result=40 14:01:55 Config A/D Result=40 14:01:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:55 Get A/D filter: -9.255963e+061 result=40 14:01:55 Get A/D value=-858993460 result=40 14:01:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:55 Parameters OK 14:01:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:55 Set A/D data flow result=40 14:01:55 Set A/D channel type result=40 14:01:55 Set A/D encoding result=40 14:01:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:55 Set channel filter=0.000000e+000 result=40 14:01:55 Config A/D Result=40 14:01:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:55 Get A/D filter: -9.255963e+061 result=40 14:01:55 Get A/D value=-858993460 result=40 14:01:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:55 Aux= 14:01:55 Message to Camera, serial 53622 queued 14:02:04 Received message from Master: op=Shutter serial=53632 14:02:04 Shutter LASER close 14:02:04 Received message from Master: op=PointingHead serial=53636 14:02:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:02:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:02:04 Point started: ret=0 14:02:04 point_skyscan result=0 14:02:05 Check angles 14:02:05 SkyScan query 14:02:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 14:02:06 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 14:02:06 Check angles 14:02:06 SkyScan query 14:02:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 14:02:06 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 14:02:07 Check angles 14:02:07 SkyScan query 14:02:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.58<-18772 Statuses=0008 0009 14:02:07 Msec=1500 True Az=112.995 Ze=-101.58 Az status=0008 Ze status=0009 14:02:07 Check angles 14:02:07 SkyScan query 14:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 14:02:08 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 14:02:08 Check angles 14:02:08 SkyScan query 14:02:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 14:02:09 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 14:02:09 Check angles 14:02:09 SkyScan query 14:02:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 14:02:09 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 14:02:10 Check angles 14:02:10 SkyScan query 14:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 14:02:10 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 14:02:10 Check angles 14:02:10 SkyScan query 14:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 14:02:11 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 14:02:11 Check angles 14:02:11 SkyScan query 14:02:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:02:12 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:02:12 Message to Master queued w/err=0: serial=53636 error=0 14:02:17 Received message from Master: op=Filter serial=53637 14:02:17 Color wheel filter change from 0 to 0 14:02:17 FLIGetFilterPos err=0 currentPosition=0 14:02:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:17 Filter is already there-color wheel unchanged 14:02:17 Received message from Master: op=Shutter serial=53638 14:02:17 Shutter LASER close 14:02:17 Received message from Camera: op=State serial=53640 14:02:17 GetSingleValue result=40 Value=cccccccc 14:02:17 SkyScan query 14:02:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:02:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:18 Parameters OK 14:02:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:18 Set A/D data flow result=40 14:02:18 Set A/D channel type result=40 14:02:18 Set A/D encoding result=40 14:02:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:18 Set channel filter=0.000000e+000 result=40 14:02:18 Config A/D Result=40 14:02:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:18 Get A/D filter: -9.255963e+061 result=40 14:02:18 Get A/D value=-858993460 result=40 14:02:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:18 Parameters OK 14:02:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:18 Set A/D data flow result=40 14:02:18 Set A/D channel type result=40 14:02:18 Set A/D encoding result=40 14:02:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:18 Set channel filter=0.000000e+000 result=40 14:02:18 Config A/D Result=40 14:02:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:18 Get A/D filter: -9.255963e+061 result=40 14:02:18 Get A/D value=-858993460 result=40 14:02:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:18 Aux= 14:02:18 Message to Camera, serial 53640 queued 14:02:54 Received message from Master: op=PointingHead serial=53653 14:02:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:02:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:02:55 Point started: ret=0 14:02:55 point_skyscan result=0 14:02:56 Check angles 14:02:56 SkyScan query 14:02:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:02:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:02:56 Message to Master queued w/err=0: serial=53653 error=0 14:03:01 Received message from Master: op=Filter serial=53654 14:03:01 Color wheel filter change from 0 to 0 14:03:01 FLIGetFilterPos err=0 currentPosition=0 14:03:01 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:01 Filter is already there-color wheel unchanged 14:03:01 Received message from Master: op=Shutter serial=53655 14:03:01 Shutter LASER close 14:03:01 Received message from Camera: op=State serial=53657 14:03:01 GetSingleValue result=40 Value=cccccccc 14:03:01 SkyScan query 14:03:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:03:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:02 Parameters OK 14:03:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:02 Set A/D data flow result=40 14:03:02 Set A/D channel type result=40 14:03:02 Set A/D encoding result=40 14:03:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:02 Set channel filter=0.000000e+000 result=40 14:03:02 Config A/D Result=40 14:03:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:02 Get A/D filter: -9.255963e+061 result=40 14:03:02 Get A/D value=-858993460 result=40 14:03:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:02 Parameters OK 14:03:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:02 Set A/D data flow result=40 14:03:02 Set A/D channel type result=40 14:03:02 Set A/D encoding result=40 14:03:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:02 Set channel filter=0.000000e+000 result=40 14:03:02 Config A/D Result=40 14:03:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:02 Get A/D filter: -9.255963e+061 result=40 14:03:02 Get A/D value=-858993460 result=40 14:03:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:02 Aux= 14:03:02 Message to Camera, serial 53657 queued 14:03:38 Received message from Master: op=Identify serial=53666 14:03:39 Received message from Master: op=PointingHead serial=53673 14:03:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:03:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:03:39 Point started: ret=0 14:03:39 point_skyscan result=0 14:03:40 Check angles 14:03:40 SkyScan query 14:03:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:03:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:03:40 Message to Master queued w/err=0: serial=53673 error=0 14:03:45 Received message from Master: op=Filter serial=53674 14:03:45 Color wheel filter change from 0 to 0 14:03:45 FLIGetFilterPos err=0 currentPosition=0 14:03:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:45 Filter is already there-color wheel unchanged 14:03:46 Received message from Master: op=Shutter serial=53675 14:03:46 Shutter LASER close 14:03:46 Received message from Camera: op=State serial=53677 14:03:46 GetSingleValue result=40 Value=cccccccc 14:03:46 SkyScan query 14:03:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:03:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:46 Parameters OK 14:03:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:46 Set A/D data flow result=40 14:03:46 Set A/D channel type result=40 14:03:46 Set A/D encoding result=40 14:03:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:46 Set channel filter=0.000000e+000 result=40 14:03:46 Config A/D Result=40 14:03:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:46 Get A/D filter: -9.255963e+061 result=40 14:03:46 Get A/D value=-858993460 result=40 14:03:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:46 Parameters OK 14:03:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:46 Set A/D data flow result=40 14:03:46 Set A/D channel type result=40 14:03:46 Set A/D encoding result=40 14:03:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:46 Set channel filter=0.000000e+000 result=40 14:03:46 Config A/D Result=40 14:03:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:46 Get A/D filter: -9.255963e+061 result=40 14:03:46 Get A/D value=-858993460 result=40 14:03:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:46 Aux= 14:03:46 Message to Camera, serial 53677 queued [UTC 2019-3-1 14:03:50] 14:04:23 Received message from Master: op=PointingHead serial=53690 14:04:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:04:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:04:23 Point started: ret=0 14:04:23 point_skyscan result=0 14:04:24 Check angles 14:04:24 SkyScan query 14:04:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:04:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:04:25 Message to Master queued w/err=0: serial=53690 error=0 14:04:30 Received message from Master: op=Filter serial=53691 14:04:30 Color wheel filter change from 0 to 0 14:04:30 FLIGetFilterPos err=0 currentPosition=0 14:04:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:30 Filter is already there-color wheel unchanged 14:04:30 Received message from Master: op=Shutter serial=53692 14:04:30 Shutter LASER close 14:04:30 Received message from Camera: op=State serial=53694 14:04:30 GetSingleValue result=40 Value=cccccccc 14:04:30 SkyScan query 14:04:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:04:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:30 Parameters OK 14:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:30 Set A/D data flow result=40 14:04:30 Set A/D channel type result=40 14:04:30 Set A/D encoding result=40 14:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:30 Set channel filter=0.000000e+000 result=40 14:04:30 Config A/D Result=40 14:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:30 Get A/D filter: -9.255963e+061 result=40 14:04:30 Get A/D value=-858993460 result=40 14:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:30 Parameters OK 14:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:30 Set A/D data flow result=40 14:04:30 Set A/D channel type result=40 14:04:30 Set A/D encoding result=40 14:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:30 Set channel filter=0.000000e+000 result=40 14:04:30 Config A/D Result=40 14:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:30 Get A/D filter: -9.255963e+061 result=40 14:04:30 Get A/D value=-858993460 result=40 14:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:30 Aux= 14:04:30 Message to Camera, serial 53694 queued 14:05:07 Received message from Master: op=PointingHead serial=53707 14:05:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:05:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:05:08 Point started: ret=0 14:05:08 point_skyscan result=0 14:05:08 Check angles 14:05:08 SkyScan query 14:05:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.85<-13590 Statuses=0008 0009 14:05:09 Msec=0 True Az=112.995 Ze=-23.85 Az status=0008 Ze status=0009 14:05:09 Check angles 14:05:09 SkyScan query 14:05:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.805<-14987 Statuses=0008 0009 14:05:10 Msec=750 True Az=112.995 Ze=-44.805 Az status=0008 Ze status=0009 14:05:10 Check angles 14:05:10 SkyScan query 14:05:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.18<-16412 Statuses=0008 0009 14:05:10 Msec=1500 True Az=112.995 Ze=-66.18 Az status=0008 Ze status=0009 14:05:11 Check angles 14:05:11 SkyScan query 14:05:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.12<-17808 Statuses=0008 0009 14:05:11 Msec=2250 True Az=112.995 Ze=-87.12 Az status=0008 Ze status=0009 14:05:11 Check angles 14:05:11 SkyScan query 14:05:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.075<-19205 Statuses=0008 0009 14:05:12 Msec=3000 True Az=112.995 Ze=-108.075 Az status=0008 Ze status=0009 14:05:12 Check angles 14:05:12 SkyScan query 14:05:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.465<-20631 Statuses=0008 0009 14:05:13 Msec=3750 True Az=112.995 Ze=-129.465 Az status=0008 Ze status=0009 14:05:13 Check angles 14:05:13 SkyScan query 14:05:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.84<-22056 Statuses=0008 0009 14:05:14 Msec=4500 True Az=112.995 Ze=-150.84 Az status=0008 Ze status=0009 14:05:14 Check angles 14:05:14 SkyScan query 14:05:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0008 0009 14:05:14 Msec=5250 True Az=112.995 Ze=-171.51 Az status=0008 Ze status=0009 14:05:14 Check angles 14:05:14 SkyScan query 14:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:05:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:05:15 Message to Master queued w/err=0: serial=53707 error=0 14:05:20 Received message from Master: op=Filter serial=53708 14:05:20 Color wheel filter change from 0 to 0 14:05:20 FLIGetFilterPos err=0 currentPosition=0 14:05:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:20 Filter is already there-color wheel unchanged 14:05:20 Received message from Master: op=Shutter serial=53709 14:05:20 Shutter LASER open 14:05:20 Received message from Camera: op=State serial=53711 14:05:20 GetSingleValue result=40 Value=cccccccc 14:05:20 SkyScan query 14:05:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:05:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:21 Parameters OK 14:05:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:21 Set A/D data flow result=40 14:05:21 Set A/D channel type result=40 14:05:21 Set A/D encoding result=40 14:05:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:21 Set channel filter=0.000000e+000 result=40 14:05:21 Config A/D Result=40 14:05:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:21 Get A/D filter: -9.255963e+061 result=40 14:05:21 Get A/D value=-858993460 result=40 14:05:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:21 Parameters OK 14:05:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:21 Set A/D data flow result=40 14:05:21 Set A/D channel type result=40 14:05:21 Set A/D encoding result=40 14:05:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:21 Set channel filter=0.000000e+000 result=40 14:05:21 Config A/D Result=40 14:05:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:21 Get A/D filter: -9.255963e+061 result=40 14:05:21 Get A/D value=-858993460 result=40 14:05:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:21 Aux= 14:05:21 Message to Camera, serial 53711 queued 14:05:28 Received message from Master: op=Shutter serial=53720 14:05:28 Shutter LASER close 14:05:29 Received message from Master: op=PointingHead serial=53724 14:05:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:05:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:05:29 Point started: ret=0 14:05:29 point_skyscan result=0 14:05:30 Check angles 14:05:30 SkyScan query 14:05:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 14:05:31 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 14:05:31 Check angles 14:05:31 SkyScan query 14:05:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 14:05:32 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 14:05:32 Check angles 14:05:32 SkyScan query 14:05:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 14:05:32 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 14:05:32 Check angles 14:05:32 SkyScan query 14:05:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.785<-17319 Statuses=0008 0009 14:05:33 Msec=2250 True Az=112.995 Ze=-79.785 Az status=0008 Ze status=0009 14:05:33 Check angles 14:05:33 SkyScan query 14:05:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 14:05:34 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 14:05:34 Check angles 14:05:34 SkyScan query 14:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 14:05:35 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 14:05:35 Check angles 14:05:35 SkyScan query 14:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.905<-13127 Statuses=0008 0009 14:05:35 Msec=4500 True Az=112.995 Ze=-16.905 Az status=0008 Ze status=0009 14:05:35 Check angles 14:05:35 SkyScan query 14:05:36 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 14:05:36 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 14:05:36 Check angles 14:05:36 SkyScan query 14:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:05:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:05:37 Message to Master queued w/err=0: serial=53724 error=0 14:05:42 Received message from Master: op=Filter serial=53725 14:05:42 Color wheel filter change from 0 to 0 14:05:42 FLIGetFilterPos err=0 currentPosition=0 14:05:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:42 Filter is already there-color wheel unchanged 14:05:42 Received message from Master: op=Shutter serial=53726 14:05:42 Shutter LASER close 14:05:42 Received message from Camera: op=State serial=53728 14:05:42 GetSingleValue result=40 Value=cccccccc 14:05:42 SkyScan query 14:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:05:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:43 Parameters OK 14:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:43 Set A/D data flow result=40 14:05:43 Set A/D channel type result=40 14:05:43 Set A/D encoding result=40 14:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:43 Set channel filter=0.000000e+000 result=40 14:05:43 Config A/D Result=40 14:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:43 Get A/D filter: -9.255963e+061 result=40 14:05:43 Get A/D value=-858993460 result=40 14:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:43 Parameters OK 14:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:43 Set A/D data flow result=40 14:05:43 Set A/D channel type result=40 14:05:43 Set A/D encoding result=40 14:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:43 Set channel filter=0.000000e+000 result=40 14:05:43 Config A/D Result=40 14:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:43 Get A/D filter: -9.255963e+061 result=40 14:05:43 Get A/D value=-858993460 result=40 14:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:43 Aux= 14:05:43 Message to Camera, serial 53728 queued 14:06:20 Received message from Master: op=PointingHead serial=53741 14:06:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:06:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:06:20 Point started: ret=0 14:06:20 point_skyscan result=0 14:06:21 Check angles 14:06:21 SkyScan query 14:06:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:06:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:06:21 Message to Master queued w/err=0: serial=53741 error=0 14:06:26 Received message from Master: op=Filter serial=53742 14:06:26 Color wheel filter change from 0 to 0 14:06:26 FLIGetFilterPos err=0 currentPosition=0 14:06:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:26 Filter is already there-color wheel unchanged 14:06:26 Received message from Master: op=Shutter serial=53743 14:06:26 Shutter LASER close 14:06:26 Received message from Camera: op=State serial=53745 14:06:26 GetSingleValue result=40 Value=cccccccc 14:06:26 SkyScan query 14:06:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:06:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:27 Parameters OK 14:06:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:27 Set A/D data flow result=40 14:06:27 Set A/D channel type result=40 14:06:27 Set A/D encoding result=40 14:06:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:27 Set channel filter=0.000000e+000 result=40 14:06:27 Config A/D Result=40 14:06:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:27 Get A/D filter: -9.255963e+061 result=40 14:06:27 Get A/D value=-858993460 result=40 14:06:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:27 Parameters OK 14:06:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:27 Set A/D data flow result=40 14:06:27 Set A/D channel type result=40 14:06:27 Set A/D encoding result=40 14:06:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:27 Set channel filter=0.000000e+000 result=40 14:06:27 Config A/D Result=40 14:06:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:27 Get A/D filter: -9.255963e+061 result=40 14:06:27 Get A/D value=-858993460 result=40 14:06:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:27 Aux= 14:06:27 Message to Camera, serial 53745 queued 14:07:04 Received message from Master: op=PointingHead serial=53758 14:07:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:07:04 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:07:04 Point started: ret=0 14:07:04 point_skyscan result=0 14:07:05 Check angles 14:07:05 SkyScan query 14:07:05 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 14:07:05 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 14:07:06 Check angles 14:07:06 SkyScan query 14:07:06 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.495<-12433 Statuses=0009 0008 14:07:06 Msec=750 True Az=153.51 Ze=-6.495 Az status=0009 Ze status=0008 14:07:06 Check angles 14:07:06 SkyScan query 14:07:07 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 14:07:07 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 14:07:07 Check angles 14:07:07 SkyScan query 14:07:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:07:08 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:07:08 Message to Master queued w/err=0: serial=53758 error=0 14:07:13 Received message from Master: op=Filter serial=53759 14:07:13 Color wheel filter change from 0 to 0 14:07:13 FLIGetFilterPos err=0 currentPosition=0 14:07:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:13 Filter is already there-color wheel unchanged 14:07:13 Received message from Master: op=Shutter serial=53760 14:07:13 Shutter LASER close 14:07:13 Received message from Camera: op=State serial=53762 14:07:13 GetSingleValue result=40 Value=cccccccc 14:07:13 SkyScan query 14:07:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:07:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:14 Parameters OK 14:07:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:14 Set A/D data flow result=40 14:07:14 Set A/D channel type result=40 14:07:14 Set A/D encoding result=40 14:07:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:14 Set channel filter=0.000000e+000 result=40 14:07:14 Config A/D Result=40 14:07:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:14 Get A/D filter: -9.255963e+061 result=40 14:07:14 Get A/D value=-858993460 result=40 14:07:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:14 Parameters OK 14:07:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:14 Set A/D data flow result=40 14:07:14 Set A/D channel type result=40 14:07:14 Set A/D encoding result=40 14:07:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:14 Set channel filter=0.000000e+000 result=40 14:07:14 Config A/D Result=40 14:07:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:14 Get A/D filter: -9.255963e+061 result=40 14:07:14 Get A/D value=-858993460 result=40 14:07:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:14 Aux= 14:07:14 Message to Camera, serial 53762 queued 14:07:50 Received message from Master: op=PointingHead serial=53775 14:07:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:07:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:07:51 Point started: ret=0 14:07:51 point_skyscan result=0 14:07:51 Check angles 14:07:51 SkyScan query 14:07:52 SkyScan query done: ret=0 az=152.82<-10188 ze=6.51<-11566 Statuses=0009 0008 14:07:52 Msec=0 True Az=152.82 Ze=6.51 Az status=0009 Ze status=0008 14:07:52 Check angles 14:07:52 SkyScan query 14:07:53 SkyScan query done: ret=0 az=135.225<-9015 ze=6.495<-11567 Statuses=0009 0008 14:07:53 Msec=750 True Az=135.225 Ze=6.495 Az status=0009 Ze status=0008 14:07:53 Check angles 14:07:53 SkyScan query 14:07:54 SkyScan query done: ret=0 az=117.51<-7834 ze=6.495<-11567 Statuses=0009 0008 14:07:54 Msec=1500 True Az=117.51 Ze=6.495 Az status=0009 Ze status=0008 14:07:54 Check angles 14:07:54 SkyScan query 14:07:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:07:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:07:54 Message to Master queued w/err=0: serial=53775 error=0 14:07:59 Received message from Master: op=Filter serial=53776 14:07:59 Color wheel filter change from 0 to 0 14:07:59 FLIGetFilterPos err=0 currentPosition=0 14:07:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:59 Filter is already there-color wheel unchanged 14:07:59 Received message from Master: op=Shutter serial=53777 14:07:59 Shutter LASER close 14:08:00 Received message from Camera: op=State serial=53779 14:08:00 GetSingleValue result=40 Value=cccccccc 14:08:00 SkyScan query 14:08:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:00 Parameters OK 14:08:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:00 Set A/D data flow result=40 14:08:00 Set A/D channel type result=40 14:08:00 Set A/D encoding result=40 14:08:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:00 Set channel filter=0.000000e+000 result=40 14:08:00 Config A/D Result=40 14:08:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:00 Get A/D filter: -9.255963e+061 result=40 14:08:00 Get A/D value=-858993460 result=40 14:08:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:00 Parameters OK 14:08:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:00 Set A/D data flow result=40 14:08:00 Set A/D channel type result=40 14:08:00 Set A/D encoding result=40 14:08:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:00 Set channel filter=0.000000e+000 result=40 14:08:00 Config A/D Result=40 14:08:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:00 Get A/D filter: -9.255963e+061 result=40 14:08:00 Get A/D value=-858993460 result=40 14:08:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:00 Aux= 14:08:00 Message to Camera, serial 53779 queued 14:08:37 Received message from Master: op=PointingHead serial=53792 14:08:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:08:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:08:37 Point started: ret=0 14:08:37 point_skyscan result=0 14:08:38 Check angles 14:08:38 SkyScan query 14:08:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 14:08:39 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 14:08:39 Check angles 14:08:39 SkyScan query 14:08:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 14:08:39 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 14:08:40 Check angles 14:08:40 SkyScan query 14:08:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.43<-16362 Statuses=0008 0009 14:08:40 Msec=1500 True Az=112.995 Ze=-65.43 Az status=0008 Ze status=0009 14:08:40 Check angles 14:08:40 SkyScan query 14:08:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 14:08:41 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 14:08:41 Check angles 14:08:41 SkyScan query 14:08:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.34<-19156 Statuses=0008 0009 14:08:42 Msec=3000 True Az=112.995 Ze=-107.34 Az status=0008 Ze status=0009 14:08:42 Check angles 14:08:42 SkyScan query 14:08:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.7<-20580 Statuses=0008 0009 14:08:42 Msec=3750 True Az=112.995 Ze=-128.7 Az status=0008 Ze status=0009 14:08:43 Check angles 14:08:43 SkyScan query 14:08:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.67<-21978 Statuses=0008 0009 14:08:43 Msec=4500 True Az=112.995 Ze=-149.67 Az status=0008 Ze status=0009 14:08:43 Check angles 14:08:43 SkyScan query 14:08:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 14:08:44 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 14:08:44 Check angles 14:08:44 SkyScan query 14:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:08:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:08:45 Message to Master queued w/err=0: serial=53792 error=0 14:08:50 Received message from Master: op=Filter serial=53793 14:08:50 Color wheel filter change from 0 to 0 14:08:50 FLIGetFilterPos err=0 currentPosition=0 14:08:50 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:50 Filter is already there-color wheel unchanged 14:08:50 Received message from Master: op=Shutter serial=53794 14:08:50 Shutter LASER open 14:08:50 Received message from Camera: op=State serial=53796 14:08:50 GetSingleValue result=40 Value=cccccccc 14:08:50 SkyScan query 14:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:08:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:51 Parameters OK 14:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:51 Set A/D data flow result=40 14:08:51 Set A/D channel type result=40 14:08:51 Set A/D encoding result=40 14:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:51 Set channel filter=0.000000e+000 result=40 14:08:51 Config A/D Result=40 14:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:51 Get A/D filter: -9.255963e+061 result=40 14:08:51 Get A/D value=-858993460 result=40 14:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:51 Parameters OK 14:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:51 Set A/D data flow result=40 14:08:51 Set A/D channel type result=40 14:08:51 Set A/D encoding result=40 14:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:51 Set channel filter=0.000000e+000 result=40 14:08:51 Config A/D Result=40 14:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:51 Get A/D filter: -9.255963e+061 result=40 14:08:51 Get A/D value=-858993460 result=40 14:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:51 Aux= 14:08:51 Message to Camera, serial 53796 queued 14:08:59 Received message from Master: op=Shutter serial=53806 14:08:59 Shutter LASER close 14:08:59 Received message from Master: op=PointingHead serial=53810 14:08:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:08:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:09:00 Point started: ret=0 14:09:00 point_skyscan result=0 14:09:01 Check angles 14:09:01 SkyScan query 14:09:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 14:09:01 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 14:09:01 Check angles 14:09:01 SkyScan query 14:09:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 14:09:02 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 14:09:02 Check angles 14:09:02 SkyScan query 14:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.235<-18749 Statuses=0008 0009 14:09:03 Msec=1500 True Az=112.995 Ze=-101.235 Az status=0008 Ze status=0009 14:09:03 Check angles 14:09:03 SkyScan query 14:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 14:09:03 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 14:09:04 Check angles 14:09:04 SkyScan query 14:09:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.34<-15956 Statuses=0008 0009 14:09:04 Msec=3000 True Az=112.995 Ze=-59.34 Az status=0008 Ze status=0009 14:09:04 Check angles 14:09:04 SkyScan query 14:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.935<-14529 Statuses=0008 0009 14:09:05 Msec=3750 True Az=112.995 Ze=-37.935 Az status=0008 Ze status=0009 14:09:05 Check angles 14:09:05 SkyScan query 14:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.98<-13132 Statuses=0008 0009 14:09:06 Msec=4500 True Az=112.995 Ze=-16.98 Az status=0008 Ze status=0009 14:09:06 Check angles 14:09:06 SkyScan query 14:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=3.96<-11736 Statuses=0008 0009 14:09:06 Msec=5250 True Az=112.995 Ze=3.96 Az status=0008 Ze status=0009 14:09:07 Check angles 14:09:07 SkyScan query 14:09:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:09:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:09:07 Message to Master queued w/err=0: serial=53810 error=0 14:09:12 Received message from Master: op=Filter serial=53811 14:09:12 Color wheel filter change from 0 to 0 14:09:12 FLIGetFilterPos err=0 currentPosition=0 14:09:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:12 Filter is already there-color wheel unchanged 14:09:12 Received message from Master: op=Shutter serial=53812 14:09:12 Shutter LASER close 14:09:12 Received message from Camera: op=State serial=53814 14:09:12 GetSingleValue result=40 Value=cccccccc 14:09:12 SkyScan query 14:09:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:09:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:13 Parameters OK 14:09:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:13 Set A/D data flow result=40 14:09:13 Set A/D channel type result=40 14:09:13 Set A/D encoding result=40 14:09:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:13 Set channel filter=0.000000e+000 result=40 14:09:13 Config A/D Result=40 14:09:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:13 Get A/D filter: -9.255963e+061 result=40 14:09:13 Get A/D value=-858993460 result=40 14:09:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:13 Parameters OK 14:09:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:13 Set A/D data flow result=40 14:09:13 Set A/D channel type result=40 14:09:13 Set A/D encoding result=40 14:09:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:13 Set channel filter=0.000000e+000 result=40 14:09:13 Config A/D Result=40 14:09:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:13 Get A/D filter: -9.255963e+061 result=40 14:09:13 Get A/D value=-858993460 result=40 14:09:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:13 Aux= 14:09:13 Message to Camera, serial 53814 queued 14:09:50 Received message from Master: op=PointingHead serial=53827 14:09:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:09:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:09:50 Point started: ret=0 14:09:50 point_skyscan result=0 14:09:51 Check angles 14:09:51 SkyScan query 14:09:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:09:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:09:52 Message to Master queued w/err=0: serial=53827 error=0 14:09:57 Received message from Master: op=Filter serial=53828 14:09:57 Color wheel filter change from 0 to 0 14:09:57 FLIGetFilterPos err=0 currentPosition=0 14:09:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:57 Filter is already there-color wheel unchanged 14:09:57 Received message from Master: op=Shutter serial=53829 14:09:57 Shutter LASER close 14:09:57 Received message from Camera: op=State serial=53831 14:09:57 GetSingleValue result=40 Value=cccccccc 14:09:57 SkyScan query 14:09:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:09:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:57 Parameters OK 14:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:57 Set A/D data flow result=40 14:09:57 Set A/D channel type result=40 14:09:57 Set A/D encoding result=40 14:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:57 Set channel filter=0.000000e+000 result=40 14:09:57 Config A/D Result=40 14:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:57 Get A/D filter: -9.255963e+061 result=40 14:09:57 Get A/D value=-858993460 result=40 14:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:57 Parameters OK 14:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:57 Set A/D data flow result=40 14:09:57 Set A/D channel type result=40 14:09:57 Set A/D encoding result=40 14:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:57 Set channel filter=0.000000e+000 result=40 14:09:57 Config A/D Result=40 14:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:57 Get A/D filter: -9.255963e+061 result=40 14:09:57 Get A/D value=-858993460 result=40 14:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:57 Aux= 14:09:57 Message to Camera, serial 53831 queued 14:10:34 Received message from Master: op=PointingHead serial=53844 14:10:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:10:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:10:35 Point started: ret=0 14:10:35 point_skyscan result=0 14:10:35 Check angles 14:10:35 SkyScan query 14:10:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:10:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:10:36 Message to Master queued w/err=0: serial=53844 error=0 14:10:41 Received message from Master: op=Filter serial=53845 14:10:41 Color wheel filter change from 0 to 0 14:10:41 FLIGetFilterPos err=0 currentPosition=0 14:10:41 FLIGetStepsRemaining err=0 RemainingSteps=0 14:10:41 Filter is already there-color wheel unchanged 14:10:41 Received message from Master: op=Shutter serial=53846 14:10:41 Shutter LASER close 14:10:41 Received message from Camera: op=State serial=53848 14:10:41 GetSingleValue result=40 Value=cccccccc 14:10:41 SkyScan query 14:10:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:10:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:42 Parameters OK 14:10:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:42 Set A/D data flow result=40 14:10:42 Set A/D channel type result=40 14:10:42 Set A/D encoding result=40 14:10:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:42 Set channel filter=0.000000e+000 result=40 14:10:42 Config A/D Result=40 14:10:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:42 Get A/D filter: -9.255963e+061 result=40 14:10:42 Get A/D value=-858993460 result=40 14:10:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:42 Parameters OK 14:10:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:42 Set A/D data flow result=40 14:10:42 Set A/D channel type result=40 14:10:42 Set A/D encoding result=40 14:10:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:42 Set channel filter=0.000000e+000 result=40 14:10:42 Config A/D Result=40 14:10:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:42 Get A/D filter: -9.255963e+061 result=40 14:10:42 Get A/D value=-858993460 result=40 14:10:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:10:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:10:42 Aux= 14:10:42 Message to Camera, serial 53848 queued 14:11:19 Received message from Master: op=PointingHead serial=53861 14:11:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:11:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:11:19 Point started: ret=0 14:11:19 point_skyscan result=0 14:11:20 Check angles 14:11:20 SkyScan query 14:11:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:11:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:11:20 Message to Master queued w/err=0: serial=53861 error=0 14:11:25 Received message from Master: op=Filter serial=53862 14:11:25 Color wheel filter change from 0 to 0 14:11:25 FLIGetFilterPos err=0 currentPosition=0 14:11:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:25 Filter is already there-color wheel unchanged 14:11:25 Received message from Master: op=Shutter serial=53863 14:11:25 Shutter LASER close 14:11:25 Received message from Camera: op=State serial=53865 14:11:25 GetSingleValue result=40 Value=cccccccc 14:11:25 SkyScan query 14:11:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:11:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:26 Parameters OK 14:11:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:26 Set A/D data flow result=40 14:11:26 Set A/D channel type result=40 14:11:26 Set A/D encoding result=40 14:11:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:26 Set channel filter=0.000000e+000 result=40 14:11:26 Config A/D Result=40 14:11:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:26 Get A/D filter: -9.255963e+061 result=40 14:11:26 Get A/D value=-858993460 result=40 14:11:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:26 Parameters OK 14:11:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:26 Set A/D data flow result=40 14:11:26 Set A/D channel type result=40 14:11:26 Set A/D encoding result=40 14:11:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:26 Set channel filter=0.000000e+000 result=40 14:11:26 Config A/D Result=40 14:11:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:26 Get A/D filter: -9.255963e+061 result=40 14:11:26 Get A/D value=-858993460 result=40 14:11:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:26 Aux= 14:11:26 Message to Camera, serial 53865 queued 14:12:03 Received message from Master: op=PointingHead serial=53878 14:12:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:12:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:12:03 Point started: ret=0 14:12:03 point_skyscan result=0 14:12:04 Check angles 14:12:04 SkyScan query 14:12:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 14:12:04 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 14:12:05 Check angles 14:12:05 SkyScan query 14:12:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 14:12:05 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 14:12:05 Check angles 14:12:05 SkyScan query 14:12:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.16<-16344 Statuses=0008 0009 14:12:06 Msec=1500 True Az=112.995 Ze=-65.16 Az status=0008 Ze status=0009 14:12:06 Check angles 14:12:06 SkyScan query 14:12:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.565<-17771 Statuses=0008 0009 14:12:07 Msec=2250 True Az=112.995 Ze=-86.565 Az status=0008 Ze status=0009 14:12:07 Check angles 14:12:07 SkyScan query 14:12:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 14:12:07 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 14:12:08 Check angles 14:12:08 SkyScan query 14:12:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 14:12:08 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 14:12:08 Check angles 14:12:08 SkyScan query 14:12:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 14:12:09 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 14:12:09 Check angles 14:12:09 SkyScan query 14:12:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.075<-23405 Statuses=0008 0009 14:12:10 Msec=5250 True Az=112.995 Ze=-171.075 Az status=0008 Ze status=0009 14:12:10 Check angles 14:12:10 SkyScan query 14:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:12:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:12:11 Message to Master queued w/err=0: serial=53878 error=0 14:12:16 Received message from Master: op=Filter serial=53879 14:12:16 Color wheel filter change from 0 to 0 14:12:16 FLIGetFilterPos err=0 currentPosition=0 14:12:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:16 Filter is already there-color wheel unchanged 14:12:16 Received message from Master: op=Shutter serial=53880 14:12:16 Shutter LASER open 14:12:16 Received message from Camera: op=State serial=53882 14:12:16 GetSingleValue result=40 Value=cccccccc 14:12:16 SkyScan query 14:12:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:12:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:16 Parameters OK 14:12:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:16 Set A/D data flow result=40 14:12:16 Set A/D channel type result=40 14:12:16 Set A/D encoding result=40 14:12:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:16 Set channel filter=0.000000e+000 result=40 14:12:16 Config A/D Result=40 14:12:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:16 Get A/D filter: -9.255963e+061 result=40 14:12:16 Get A/D value=-858993460 result=40 14:12:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:16 Parameters OK 14:12:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:16 Set A/D data flow result=40 14:12:16 Set A/D channel type result=40 14:12:16 Set A/D encoding result=40 14:12:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:16 Set channel filter=0.000000e+000 result=40 14:12:16 Config A/D Result=40 14:12:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:16 Get A/D filter: -9.255963e+061 result=40 14:12:16 Get A/D value=-858993460 result=40 14:12:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:16 Aux= 14:12:16 Message to Camera, serial 53882 queued 14:12:25 Received message from Master: op=Shutter serial=53892 14:12:25 Shutter LASER close 14:12:25 Received message from Master: op=PointingHead serial=53896 14:12:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:12:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:12:26 Point started: ret=0 14:12:26 point_skyscan result=0 14:12:27 Check angles 14:12:27 SkyScan query 14:12:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 14:12:27 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 14:12:27 Check angles 14:12:27 SkyScan query 14:12:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.65<-20110 Statuses=0008 0009 14:12:28 Msec=750 True Az=112.995 Ze=-121.65 Az status=0008 Ze status=0009 14:12:28 Check angles 14:12:28 SkyScan query 14:12:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.71<-18714 Statuses=0008 0009 14:12:29 Msec=1500 True Az=112.995 Ze=-100.71 Az status=0008 Ze status=0009 14:12:29 Check angles 14:12:29 SkyScan query 14:12:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.755<-17317 Statuses=0008 0009 14:12:29 Msec=2250 True Az=112.995 Ze=-79.755 Az status=0008 Ze status=0009 14:12:30 Check angles 14:12:30 SkyScan query 14:12:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 14:12:30 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 14:12:30 Check angles 14:12:30 SkyScan query 14:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 14:12:31 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 14:12:31 Check angles 14:12:31 SkyScan query 14:12:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 14:12:32 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 14:12:32 Check angles 14:12:32 SkyScan query 14:12:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 14:12:32 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 14:12:33 Check angles 14:12:33 SkyScan query 14:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:12:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:12:33 Message to Master queued w/err=0: serial=53896 error=0 14:12:38 Received message from Master: op=Filter serial=53897 14:12:38 Color wheel filter change from 0 to 0 14:12:38 FLIGetFilterPos err=0 currentPosition=0 14:12:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:38 Filter is already there-color wheel unchanged 14:12:38 Received message from Master: op=Shutter serial=53898 14:12:38 Shutter LASER close 14:12:38 Received message from Camera: op=State serial=53900 14:12:38 GetSingleValue result=40 Value=cccccccc 14:12:38 SkyScan query 14:12:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:12:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:39 Parameters OK 14:12:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:39 Set A/D data flow result=40 14:12:39 Set A/D channel type result=40 14:12:39 Set A/D encoding result=40 14:12:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:39 Set channel filter=0.000000e+000 result=40 14:12:39 Config A/D Result=40 14:12:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:39 Get A/D filter: -9.255963e+061 result=40 14:12:39 Get A/D value=-858993460 result=40 14:12:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:39 Parameters OK 14:12:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:39 Set A/D data flow result=40 14:12:39 Set A/D channel type result=40 14:12:39 Set A/D encoding result=40 14:12:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:39 Set channel filter=0.000000e+000 result=40 14:12:39 Config A/D Result=40 14:12:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:39 Get A/D filter: -9.255963e+061 result=40 14:12:39 Get A/D value=-858993460 result=40 14:12:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:39 Aux= 14:12:39 Message to Camera, serial 53900 queued 14:13:16 Received message from Master: op=PointingHead serial=53913 14:13:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:13:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:13:16 Point started: ret=0 14:13:16 point_skyscan result=0 14:13:17 Check angles 14:13:17 SkyScan query 14:13:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:13:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:13:18 Message to Master queued w/err=0: serial=53913 error=0 14:13:23 Received message from Master: op=Filter serial=53914 14:13:23 Color wheel filter change from 0 to 0 14:13:23 FLIGetFilterPos err=0 currentPosition=0 14:13:23 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:23 Filter is already there-color wheel unchanged 14:13:23 Received message from Master: op=Shutter serial=53915 14:13:23 Shutter LASER close 14:13:23 Received message from Camera: op=State serial=53917 14:13:23 GetSingleValue result=40 Value=cccccccc 14:13:23 SkyScan query 14:13:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:13:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:23 Parameters OK 14:13:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:23 Set A/D data flow result=40 14:13:23 Set A/D channel type result=40 14:13:23 Set A/D encoding result=40 14:13:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:23 Set channel filter=0.000000e+000 result=40 14:13:23 Config A/D Result=40 14:13:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:23 Get A/D filter: -9.255963e+061 result=40 14:13:23 Get A/D value=-858993460 result=40 14:13:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:23 Parameters OK 14:13:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:23 Set A/D data flow result=40 14:13:23 Set A/D channel type result=40 14:13:23 Set A/D encoding result=40 14:13:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:23 Set channel filter=0.000000e+000 result=40 14:13:23 Config A/D Result=40 14:13:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:23 Get A/D filter: -9.255963e+061 result=40 14:13:23 Get A/D value=-858993460 result=40 14:13:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:23 Aux= 14:13:23 Message to Camera, serial 53917 queued 14:14:00 Received message from Master: op=PointingHead serial=53930 14:14:00 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:14:00 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:14:01 Point started: ret=0 14:14:01 point_skyscan result=0 14:14:01 Check angles 14:14:01 SkyScan query 14:14:02 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 14:14:02 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 14:14:02 Check angles 14:14:02 SkyScan query 14:14:03 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.495<-12433 Statuses=0009 0008 14:14:03 Msec=750 True Az=153.495 Ze=-6.495 Az status=0009 Ze status=0008 14:14:03 Check angles 14:14:03 SkyScan query 14:14:03 SkyScan query done: ret=0 az=170.97<-11398 ze=-6.495<-12433 Statuses=0009 0008 14:14:03 Msec=1500 True Az=170.97 Ze=-6.495 Az status=0009 Ze status=0008 14:14:04 Check angles 14:14:04 SkyScan query 14:14:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:14:04 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:14:04 Message to Master queued w/err=0: serial=53930 error=0 14:14:09 Received message from Master: op=Filter serial=53931 14:14:09 Color wheel filter change from 0 to 0 14:14:09 FLIGetFilterPos err=0 currentPosition=0 14:14:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:09 Filter is already there-color wheel unchanged 14:14:09 Received message from Master: op=Shutter serial=53932 14:14:09 Shutter LASER close 14:14:09 Received message from Camera: op=State serial=53934 14:14:09 GetSingleValue result=40 Value=cccccccc 14:14:09 SkyScan query 14:14:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:14:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:10 Parameters OK 14:14:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:10 Set A/D data flow result=40 14:14:10 Set A/D channel type result=40 14:14:10 Set A/D encoding result=40 14:14:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:10 Set channel filter=0.000000e+000 result=40 14:14:10 Config A/D Result=40 14:14:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:10 Get A/D filter: -9.255963e+061 result=40 14:14:10 Get A/D value=-858993460 result=40 14:14:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:10 Parameters OK 14:14:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:10 Set A/D data flow result=40 14:14:10 Set A/D channel type result=40 14:14:10 Set A/D encoding result=40 14:14:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:10 Set channel filter=0.000000e+000 result=40 14:14:10 Config A/D Result=40 14:14:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:10 Get A/D filter: -9.255963e+061 result=40 14:14:10 Get A/D value=-858993460 result=40 14:14:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:10 Aux= 14:14:10 Message to Camera, serial 53934 queued [UTC 2019-3-1 14:14:47] 14:14:47 Received message from Master: op=PointingHead serial=53947 14:14:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:14:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:14:47 Point started: ret=0 14:14:47 point_skyscan result=0 14:14:48 Check angles 14:14:48 SkyScan query 14:14:49 SkyScan query done: ret=0 az=152.655<-10177 ze=6.51<-11566 Statuses=0009 0008 14:14:49 Msec=0 True Az=152.655 Ze=6.51 Az status=0009 Ze status=0008 14:14:49 Check angles 14:14:49 SkyScan query 14:14:49 SkyScan query done: ret=0 az=135.195<-9013 ze=6.495<-11567 Statuses=0009 0008 14:14:49 Msec=750 True Az=135.195 Ze=6.495 Az status=0009 Ze status=0008 14:14:49 Check angles 14:14:49 SkyScan query 14:14:50 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 14:14:50 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 14:14:50 Check angles 14:14:50 SkyScan query 14:14:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:14:51 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:14:51 Message to Master queued w/err=0: serial=53947 error=0 14:14:56 Received message from Master: op=Filter serial=53948 14:14:56 Color wheel filter change from 0 to 0 14:14:56 FLIGetFilterPos err=0 currentPosition=0 14:14:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:56 Filter is already there-color wheel unchanged 14:14:56 Received message from Master: op=Shutter serial=53949 14:14:56 Shutter LASER close 14:14:56 Received message from Camera: op=State serial=53951 14:14:56 GetSingleValue result=40 Value=cccccccc 14:14:56 SkyScan query 14:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:14:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:57 Parameters OK 14:14:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:57 Set A/D data flow result=40 14:14:57 Set A/D channel type result=40 14:14:57 Set A/D encoding result=40 14:14:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:57 Set channel filter=0.000000e+000 result=40 14:14:57 Config A/D Result=40 14:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:57 Get A/D filter: -9.255963e+061 result=40 14:14:57 Get A/D value=-858993460 result=40 14:14:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:57 Parameters OK 14:14:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:57 Set A/D data flow result=40 14:14:57 Set A/D channel type result=40 14:14:57 Set A/D encoding result=40 14:14:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:57 Set channel filter=0.000000e+000 result=40 14:14:57 Config A/D Result=40 14:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:57 Get A/D filter: -9.255963e+061 result=40 14:14:57 Get A/D value=-858993460 result=40 14:14:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:57 Aux= 14:14:57 Message to Camera, serial 53951 queued 14:15:33 Received message from Master: op=PointingHead serial=53964 14:15:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:15:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:15:34 Point started: ret=0 14:15:34 point_skyscan result=0 14:15:35 Check angles 14:15:35 SkyScan query 14:15:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 14:15:35 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 14:15:35 Check angles 14:15:35 SkyScan query 14:15:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 14:15:36 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 14:15:36 Check angles 14:15:36 SkyScan query 14:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 14:15:37 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 14:15:37 Check angles 14:15:37 SkyScan query 14:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 14:15:37 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 14:15:38 Check angles 14:15:38 SkyScan query 14:15:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 14:15:38 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 14:15:38 Check angles 14:15:38 SkyScan query 14:15:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 14:15:39 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 14:15:39 Check angles 14:15:39 SkyScan query 14:15:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.61<-21974 Statuses=0008 0009 14:15:40 Msec=4500 True Az=112.995 Ze=-149.61 Az status=0008 Ze status=0009 14:15:40 Check angles 14:15:40 SkyScan query 14:15:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.55<-23370 Statuses=0008 0009 14:15:40 Msec=5250 True Az=112.995 Ze=-170.55 Az status=0008 Ze status=0009 14:15:41 Check angles 14:15:41 SkyScan query 14:15:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:15:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:15:41 Message to Master queued w/err=0: serial=53964 error=0 14:15:46 Received message from Master: op=Filter serial=53965 14:15:46 Color wheel filter change from 0 to 0 14:15:46 FLIGetFilterPos err=0 currentPosition=0 14:15:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:46 Filter is already there-color wheel unchanged 14:15:46 Received message from Master: op=Shutter serial=53966 14:15:46 Shutter LASER open 14:15:47 Received message from Camera: op=State serial=53968 14:15:47 GetSingleValue result=40 Value=cccccccc 14:15:47 SkyScan query 14:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:15:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:47 Parameters OK 14:15:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:47 Set A/D data flow result=40 14:15:47 Set A/D channel type result=40 14:15:47 Set A/D encoding result=40 14:15:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:47 Set channel filter=0.000000e+000 result=40 14:15:47 Config A/D Result=40 14:15:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:47 Get A/D filter: -9.255963e+061 result=40 14:15:47 Get A/D value=-858993460 result=40 14:15:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:47 Parameters OK 14:15:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:47 Set A/D data flow result=40 14:15:47 Set A/D channel type result=40 14:15:47 Set A/D encoding result=40 14:15:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:47 Set channel filter=0.000000e+000 result=40 14:15:47 Config A/D Result=40 14:15:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:47 Get A/D filter: -9.255963e+061 result=40 14:15:47 Get A/D value=-858993460 result=40 14:15:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:47 Aux= 14:15:47 Message to Camera, serial 53968 queued 14:15:56 Received message from Master: op=Shutter serial=53978 14:15:56 Shutter LASER close 14:15:56 Received message from Master: op=PointingHead serial=53982 14:15:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:15:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:15:56 Point started: ret=0 14:15:56 point_skyscan result=0 14:15:57 Check angles 14:15:57 SkyScan query 14:15:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.905<-21527 Statuses=0008 0009 14:15:58 Msec=0 True Az=112.995 Ze=-142.905 Az status=0008 Ze status=0009 14:15:58 Check angles 14:15:58 SkyScan query 14:15:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 14:15:58 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 14:15:59 Check angles 14:15:59 SkyScan query 14:15:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 14:15:59 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 14:15:59 Check angles 14:15:59 SkyScan query 14:16:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.07<-17338 Statuses=0008 0009 14:16:00 Msec=2250 True Az=112.995 Ze=-80.07 Az status=0008 Ze status=0009 14:16:00 Check angles 14:16:00 SkyScan query 14:16:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.115<-15941 Statuses=0008 0009 14:16:01 Msec=3000 True Az=112.995 Ze=-59.115 Az status=0008 Ze status=0009 14:16:01 Check angles 14:16:01 SkyScan query 14:16:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.13<-14542 Statuses=0008 0009 14:16:01 Msec=3750 True Az=112.995 Ze=-38.13 Az status=0008 Ze status=0009 14:16:02 Check angles 14:16:02 SkyScan query 14:16:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 14:16:02 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 14:16:02 Check angles 14:16:02 SkyScan query 14:16:03 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 14:16:03 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 14:16:03 Check angles 14:16:03 SkyScan query 14:16:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:16:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:16:04 Message to Master queued w/err=0: serial=53982 error=0 14:16:09 Received message from Master: op=Filter serial=53983 14:16:09 Color wheel filter change from 0 to 0 14:16:09 FLIGetFilterPos err=0 currentPosition=0 14:16:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:09 Filter is already there-color wheel unchanged 14:16:09 Received message from Master: op=Shutter serial=53984 14:16:09 Shutter LASER close 14:16:09 Received message from Camera: op=State serial=53986 14:16:09 GetSingleValue result=40 Value=cccccccc 14:16:09 SkyScan query 14:16:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:16:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:10 Parameters OK 14:16:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:10 Set A/D data flow result=40 14:16:10 Set A/D channel type result=40 14:16:10 Set A/D encoding result=40 14:16:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:10 Set channel filter=0.000000e+000 result=40 14:16:10 Config A/D Result=40 14:16:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:10 Get A/D filter: -9.255963e+061 result=40 14:16:10 Get A/D value=-858993460 result=40 14:16:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:10 Parameters OK 14:16:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:10 Set A/D data flow result=40 14:16:10 Set A/D channel type result=40 14:16:10 Set A/D encoding result=40 14:16:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:10 Set channel filter=0.000000e+000 result=40 14:16:10 Config A/D Result=40 14:16:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:10 Get A/D filter: -9.255963e+061 result=40 14:16:10 Get A/D value=-858993460 result=40 14:16:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:10 Aux= 14:16:10 Message to Camera, serial 53986 queued 14:16:46 Received message from Master: op=PointingHead serial=53999 14:16:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:16:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:16:47 Point started: ret=0 14:16:47 point_skyscan result=0 14:16:48 Check angles 14:16:48 SkyScan query 14:16:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:16:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:16:48 Message to Master queued w/err=0: serial=53999 error=0 14:16:53 Received message from Master: op=Filter serial=54000 14:16:53 Color wheel filter change from 0 to 0 14:16:53 FLIGetFilterPos err=0 currentPosition=0 14:16:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:53 Filter is already there-color wheel unchanged 14:16:53 Received message from Master: op=Shutter serial=54001 14:16:53 Shutter LASER close 14:16:53 Received message from Camera: op=State serial=54003 14:16:53 GetSingleValue result=40 Value=cccccccc 14:16:53 SkyScan query 14:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:16:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:54 Parameters OK 14:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:54 Set A/D data flow result=40 14:16:54 Set A/D channel type result=40 14:16:54 Set A/D encoding result=40 14:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:54 Set channel filter=0.000000e+000 result=40 14:16:54 Config A/D Result=40 14:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:54 Get A/D filter: -9.255963e+061 result=40 14:16:54 Get A/D value=-858993460 result=40 14:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:54 Parameters OK 14:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:54 Set A/D data flow result=40 14:16:54 Set A/D channel type result=40 14:16:54 Set A/D encoding result=40 14:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:54 Set channel filter=0.000000e+000 result=40 14:16:54 Config A/D Result=40 14:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:54 Get A/D filter: -9.255963e+061 result=40 14:16:54 Get A/D value=-858993460 result=40 14:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:54 Aux= 14:16:54 Message to Camera, serial 54003 queued 14:17:31 Received message from Master: op=PointingHead serial=54016 14:17:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:17:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:17:31 Point started: ret=0 14:17:31 point_skyscan result=0 14:17:32 Check angles 14:17:32 SkyScan query 14:17:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:17:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:17:32 Message to Master queued w/err=0: serial=54016 error=0 14:17:37 Received message from Master: op=Filter serial=54017 14:17:37 Color wheel filter change from 0 to 0 14:17:37 FLIGetFilterPos err=0 currentPosition=0 14:17:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:37 Filter is already there-color wheel unchanged 14:17:38 Received message from Master: op=Shutter serial=54018 14:17:38 Shutter LASER close 14:17:38 Received message from Camera: op=State serial=54020 14:17:38 GetSingleValue result=40 Value=cccccccc 14:17:38 SkyScan query 14:17:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:17:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:38 Parameters OK 14:17:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:38 Set A/D data flow result=40 14:17:38 Set A/D channel type result=40 14:17:38 Set A/D encoding result=40 14:17:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:38 Set channel filter=0.000000e+000 result=40 14:17:38 Config A/D Result=40 14:17:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:38 Get A/D filter: -9.255963e+061 result=40 14:17:38 Get A/D value=-858993460 result=40 14:17:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:38 Parameters OK 14:17:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:38 Set A/D data flow result=40 14:17:38 Set A/D channel type result=40 14:17:38 Set A/D encoding result=40 14:17:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:38 Set channel filter=0.000000e+000 result=40 14:17:38 Config A/D Result=40 14:17:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:38 Get A/D filter: -9.255963e+061 result=40 14:17:38 Get A/D value=-858993460 result=40 14:17:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:38 Aux= 14:17:38 Message to Camera, serial 54020 queued 14:18:15 Received message from Master: op=PointingHead serial=54033 14:18:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:18:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:18:15 Point started: ret=0 14:18:15 point_skyscan result=0 14:18:16 Check angles 14:18:16 SkyScan query 14:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:18:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:18:17 Message to Master queued w/err=0: serial=54033 error=0 14:18:22 Received message from Master: op=Filter serial=54034 14:18:22 Color wheel filter change from 0 to 0 14:18:22 FLIGetFilterPos err=0 currentPosition=0 14:18:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:22 Filter is already there-color wheel unchanged 14:18:22 Received message from Master: op=Shutter serial=54035 14:18:22 Shutter LASER close 14:18:22 Received message from Camera: op=State serial=54037 14:18:22 GetSingleValue result=40 Value=cccccccc 14:18:22 SkyScan query 14:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:18:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:22 Parameters OK 14:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:22 Set A/D data flow result=40 14:18:22 Set A/D channel type result=40 14:18:22 Set A/D encoding result=40 14:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:22 Set channel filter=0.000000e+000 result=40 14:18:22 Config A/D Result=40 14:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:22 Get A/D filter: -9.255963e+061 result=40 14:18:22 Get A/D value=-858993460 result=40 14:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:22 Parameters OK 14:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:22 Set A/D data flow result=40 14:18:22 Set A/D channel type result=40 14:18:22 Set A/D encoding result=40 14:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:22 Set channel filter=0.000000e+000 result=40 14:18:22 Config A/D Result=40 14:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:22 Get A/D filter: -9.255963e+061 result=40 14:18:22 Get A/D value=-858993460 result=40 14:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:22 Aux= 14:18:22 Message to Camera, serial 54037 queued 14:18:59 Received message from Master: op=PointingHead serial=54050 14:18:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:18:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:19:00 Point started: ret=0 14:19:00 point_skyscan result=0 14:19:00 Check angles 14:19:00 SkyScan query 14:19:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 14:19:01 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 14:19:01 Check angles 14:19:01 SkyScan query 14:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.195<-15013 Statuses=0008 0009 14:19:02 Msec=750 True Az=112.995 Ze=-45.195 Az status=0008 Ze status=0009 14:19:02 Check angles 14:19:02 SkyScan query 14:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.21<-16414 Statuses=0008 0009 14:19:02 Msec=1500 True Az=112.995 Ze=-66.21 Az status=0008 Ze status=0009 14:19:03 Check angles 14:19:03 SkyScan query 14:19:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.54<-17836 Statuses=0008 0009 14:19:03 Msec=2250 True Az=112.995 Ze=-87.54 Az status=0008 Ze status=0009 14:19:03 Check angles 14:19:03 SkyScan query 14:19:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.915<-19261 Statuses=0008 0009 14:19:04 Msec=3000 True Az=112.995 Ze=-108.915 Az status=0008 Ze status=0009 14:19:04 Check angles 14:19:04 SkyScan query 14:19:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-130.335<-20689 Statuses=0008 0009 14:19:05 Msec=3750 True Az=112.995 Ze=-130.335 Az status=0008 Ze status=0009 14:19:05 Check angles 14:19:05 SkyScan query 14:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.26<-22084 Statuses=0008 0009 14:19:06 Msec=4500 True Az=112.995 Ze=-151.26 Az status=0008 Ze status=0009 14:19:06 Check angles 14:19:06 SkyScan query 14:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.78<-23452 Statuses=0008 0009 14:19:06 Msec=5250 True Az=112.995 Ze=-171.78 Az status=0008 Ze status=0009 14:19:06 Check angles 14:19:06 SkyScan query 14:19:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:19:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:19:07 Message to Master queued w/err=0: serial=54050 error=0 14:19:12 Received message from Master: op=Filter serial=54051 14:19:12 Color wheel filter change from 0 to 0 14:19:12 FLIGetFilterPos err=0 currentPosition=0 14:19:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:12 Filter is already there-color wheel unchanged 14:19:12 Received message from Master: op=Shutter serial=54052 14:19:12 Shutter LASER open 14:19:12 Received message from Camera: op=State serial=54054 14:19:12 GetSingleValue result=40 Value=cccccccc 14:19:12 SkyScan query 14:19:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:19:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:13 Parameters OK 14:19:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:13 Set A/D data flow result=40 14:19:13 Set A/D channel type result=40 14:19:13 Set A/D encoding result=40 14:19:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:13 Set channel filter=0.000000e+000 result=40 14:19:13 Config A/D Result=40 14:19:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:13 Get A/D filter: -9.255963e+061 result=40 14:19:13 Get A/D value=-858993460 result=40 14:19:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:13 Parameters OK 14:19:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:13 Set A/D data flow result=40 14:19:13 Set A/D channel type result=40 14:19:13 Set A/D encoding result=40 14:19:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:13 Set channel filter=0.000000e+000 result=40 14:19:13 Config A/D Result=40 14:19:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:13 Get A/D filter: -9.255963e+061 result=40 14:19:13 Get A/D value=-858993460 result=40 14:19:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:13 Aux= 14:19:13 Message to Camera, serial 54054 queued 14:19:21 Received message from Master: op=Shutter serial=54064 14:19:21 Shutter LASER close 14:19:22 Received message from Master: op=PointingHead serial=54068 14:19:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:19:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:19:22 Point started: ret=0 14:19:22 point_skyscan result=0 14:19:23 Check angles 14:19:23 SkyScan query 14:19:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 14:19:24 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 14:19:24 Check angles 14:19:24 SkyScan query 14:19:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 14:19:24 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 14:19:25 Check angles 14:19:25 SkyScan query 14:19:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 14:19:25 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 14:19:25 Check angles 14:19:25 SkyScan query 14:19:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 14:19:26 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 14:19:26 Check angles 14:19:26 SkyScan query 14:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 14:19:27 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 14:19:27 Check angles 14:19:27 SkyScan query 14:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.13<-14542 Statuses=0008 0009 14:19:27 Msec=3750 True Az=112.995 Ze=-38.13 Az status=0008 Ze status=0009 14:19:28 Check angles 14:19:28 SkyScan query 14:19:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.16<-13144 Statuses=0008 0009 14:19:28 Msec=4500 True Az=112.995 Ze=-17.16 Az status=0008 Ze status=0009 14:19:28 Check angles 14:19:28 SkyScan query 14:19:29 SkyScan query done: ret=0 az=112.995<-7533 ze=3.795<-11747 Statuses=0008 0009 14:19:29 Msec=5250 True Az=112.995 Ze=3.795 Az status=0008 Ze status=0009 14:19:29 Check angles 14:19:29 SkyScan query 14:19:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:19:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:19:30 Message to Master queued w/err=0: serial=54068 error=0 14:19:35 Received message from Master: op=Filter serial=54069 14:19:35 Color wheel filter change from 0 to 0 14:19:35 FLIGetFilterPos err=0 currentPosition=0 14:19:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:35 Filter is already there-color wheel unchanged 14:19:35 Received message from Master: op=Shutter serial=54070 14:19:35 Shutter LASER close 14:19:35 Received message from Camera: op=State serial=54072 14:19:35 GetSingleValue result=40 Value=cccccccc 14:19:35 SkyScan query 14:19:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:19:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:36 Parameters OK 14:19:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:36 Set A/D data flow result=40 14:19:36 Set A/D channel type result=40 14:19:36 Set A/D encoding result=40 14:19:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:36 Set channel filter=0.000000e+000 result=40 14:19:36 Config A/D Result=40 14:19:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:36 Get A/D filter: -9.255963e+061 result=40 14:19:36 Get A/D value=-858993460 result=40 14:19:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:36 Parameters OK 14:19:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:36 Set A/D data flow result=40 14:19:36 Set A/D channel type result=40 14:19:36 Set A/D encoding result=40 14:19:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:36 Set channel filter=0.000000e+000 result=40 14:19:36 Config A/D Result=40 14:19:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:36 Get A/D filter: -9.255963e+061 result=40 14:19:36 Get A/D value=-858993460 result=40 14:19:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:36 Aux= 14:19:36 Message to Camera, serial 54072 queued 14:20:12 Received message from Master: op=PointingHead serial=54085 14:20:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:20:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:20:13 Point started: ret=0 14:20:13 point_skyscan result=0 14:20:14 Check angles 14:20:14 SkyScan query 14:20:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:20:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:20:14 Message to Master queued w/err=0: serial=54085 error=0 14:20:19 Received message from Master: op=Filter serial=54086 14:20:19 Color wheel filter change from 0 to 0 14:20:19 FLIGetFilterPos err=0 currentPosition=0 14:20:19 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:19 Filter is already there-color wheel unchanged 14:20:19 Received message from Master: op=Shutter serial=54087 14:20:19 Shutter LASER close 14:20:19 Received message from Camera: op=State serial=54089 14:20:19 GetSingleValue result=40 Value=cccccccc 14:20:19 SkyScan query 14:20:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:20:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:20 Parameters OK 14:20:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:20 Set A/D data flow result=40 14:20:20 Set A/D channel type result=40 14:20:20 Set A/D encoding result=40 14:20:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:20 Set channel filter=0.000000e+000 result=40 14:20:20 Config A/D Result=40 14:20:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:20 Get A/D filter: -9.255963e+061 result=40 14:20:20 Get A/D value=-858993460 result=40 14:20:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:20 Parameters OK 14:20:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:20 Set A/D data flow result=40 14:20:20 Set A/D channel type result=40 14:20:20 Set A/D encoding result=40 14:20:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:20 Set channel filter=0.000000e+000 result=40 14:20:20 Config A/D Result=40 14:20:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:20 Get A/D filter: -9.255963e+061 result=40 14:20:20 Get A/D value=-858993460 result=40 14:20:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:20 Aux= 14:20:20 Message to Camera, serial 54089 queued 14:20:57 Received message from Master: op=PointingHead serial=54102 14:20:57 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:20:57 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:20:57 Point started: ret=0 14:20:57 point_skyscan result=0 14:20:58 Check angles 14:20:58 SkyScan query 14:20:58 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 14:20:58 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 14:20:59 Check angles 14:20:59 SkyScan query 14:20:59 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 14:20:59 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 14:20:59 Check angles 14:20:59 SkyScan query 14:21:00 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 14:21:00 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 14:21:00 Check angles 14:21:00 SkyScan query 14:21:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:21:01 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:21:01 Message to Master queued w/err=0: serial=54102 error=0 14:21:06 Received message from Master: op=Filter serial=54103 14:21:06 Color wheel filter change from 0 to 0 14:21:06 FLIGetFilterPos err=0 currentPosition=0 14:21:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:06 Filter is already there-color wheel unchanged 14:21:06 Received message from Master: op=Shutter serial=54104 14:21:06 Shutter LASER close 14:21:06 Received message from Camera: op=State serial=54106 14:21:06 GetSingleValue result=40 Value=cccccccc 14:21:06 SkyScan query 14:21:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:21:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:07 Parameters OK 14:21:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:07 Set A/D data flow result=40 14:21:07 Set A/D channel type result=40 14:21:07 Set A/D encoding result=40 14:21:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:07 Set channel filter=0.000000e+000 result=40 14:21:07 Config A/D Result=40 14:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:07 Get A/D filter: -9.255963e+061 result=40 14:21:07 Get A/D value=-858993460 result=40 14:21:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:07 Parameters OK 14:21:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:07 Set A/D data flow result=40 14:21:07 Set A/D channel type result=40 14:21:07 Set A/D encoding result=40 14:21:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:07 Set channel filter=0.000000e+000 result=40 14:21:07 Config A/D Result=40 14:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:07 Get A/D filter: -9.255963e+061 result=40 14:21:07 Get A/D value=-858993460 result=40 14:21:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:07 Aux= 14:21:07 Message to Camera, serial 54106 queued 14:21:43 Received message from Master: op=PointingHead serial=54119 14:21:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:21:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:21:44 Point started: ret=0 14:21:44 point_skyscan result=0 14:21:44 Check angles 14:21:44 SkyScan query 14:21:45 SkyScan query done: ret=0 az=153.195<-10213 ze=6.51<-11566 Statuses=0009 0008 14:21:45 Msec=0 True Az=153.195 Ze=6.51 Az status=0009 Ze status=0008 14:21:45 Check angles 14:21:45 SkyScan query 14:21:46 SkyScan query done: ret=0 az=135.675<-9045 ze=6.495<-11567 Statuses=0009 0008 14:21:46 Msec=750 True Az=135.675 Ze=6.495 Az status=0009 Ze status=0008 14:21:46 Check angles 14:21:46 SkyScan query 14:21:47 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 14:21:47 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 14:21:47 Check angles 14:21:47 SkyScan query 14:21:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:21:47 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:21:47 Message to Master queued w/err=0: serial=54119 error=0 14:21:52 Received message from Master: op=Filter serial=54120 14:21:52 Color wheel filter change from 0 to 0 14:21:52 FLIGetFilterPos err=0 currentPosition=0 14:21:52 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:52 Filter is already there-color wheel unchanged 14:21:52 Received message from Master: op=Shutter serial=54121 14:21:52 Shutter LASER close 14:21:52 Received message from Camera: op=State serial=54123 14:21:52 GetSingleValue result=40 Value=cccccccc 14:21:52 SkyScan query 14:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:21:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:53 Parameters OK 14:21:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:53 Set A/D data flow result=40 14:21:53 Set A/D channel type result=40 14:21:53 Set A/D encoding result=40 14:21:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:53 Set channel filter=0.000000e+000 result=40 14:21:53 Config A/D Result=40 14:21:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:53 Get A/D filter: -9.255963e+061 result=40 14:21:53 Get A/D value=-858993460 result=40 14:21:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:53 Parameters OK 14:21:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:53 Set A/D data flow result=40 14:21:53 Set A/D channel type result=40 14:21:53 Set A/D encoding result=40 14:21:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:53 Set channel filter=0.000000e+000 result=40 14:21:53 Config A/D Result=40 14:21:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:53 Get A/D filter: -9.255963e+061 result=40 14:21:53 Get A/D value=-858993460 result=40 14:21:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:53 Aux= 14:21:53 Message to Camera, serial 54123 queued 14:22:30 Received message from Master: op=PointingHead serial=54136 14:22:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:22:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:22:30 Point started: ret=0 14:22:30 point_skyscan result=0 14:22:31 Check angles 14:22:31 SkyScan query 14:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 14:22:32 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 14:22:32 Check angles 14:22:32 SkyScan query 14:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 14:22:32 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 14:22:32 Check angles 14:22:32 SkyScan query 14:22:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 14:22:33 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 14:22:33 Check angles 14:22:33 SkyScan query 14:22:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.92<-17728 Statuses=0008 0009 14:22:34 Msec=2250 True Az=112.995 Ze=-85.92 Az status=0008 Ze status=0009 14:22:34 Check angles 14:22:34 SkyScan query 14:22:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.86<-19124 Statuses=0008 0009 14:22:35 Msec=3000 True Az=112.995 Ze=-106.86 Az status=0008 Ze status=0009 14:22:35 Check angles 14:22:35 SkyScan query 14:22:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.845<-20523 Statuses=0008 0009 14:22:35 Msec=3750 True Az=112.995 Ze=-127.845 Az status=0008 Ze status=0009 14:22:35 Check angles 14:22:35 SkyScan query 14:22:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.785<-21919 Statuses=0008 0009 14:22:36 Msec=4500 True Az=112.995 Ze=-148.785 Az status=0008 Ze status=0009 14:22:36 Check angles 14:22:36 SkyScan query 14:22:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.725<-23315 Statuses=0008 0009 14:22:37 Msec=5250 True Az=112.995 Ze=-169.725 Az status=0008 Ze status=0009 14:22:37 Check angles 14:22:37 SkyScan query 14:22:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:22:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:22:38 Message to Master queued w/err=0: serial=54136 error=0 14:22:43 Received message from Master: op=Filter serial=54137 14:22:43 Color wheel filter change from 0 to 0 14:22:43 FLIGetFilterPos err=0 currentPosition=0 14:22:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:43 Filter is already there-color wheel unchanged 14:22:43 Received message from Master: op=Shutter serial=54138 14:22:43 Shutter LASER open 14:22:43 Received message from Camera: op=State serial=54140 14:22:43 GetSingleValue result=40 Value=cccccccc 14:22:43 SkyScan query 14:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:22:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:43 Parameters OK 14:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:43 Set A/D data flow result=40 14:22:43 Set A/D channel type result=40 14:22:43 Set A/D encoding result=40 14:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:43 Set channel filter=0.000000e+000 result=40 14:22:43 Config A/D Result=40 14:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:43 Get A/D filter: -9.255963e+061 result=40 14:22:43 Get A/D value=-858993460 result=40 14:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:43 Parameters OK 14:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:43 Set A/D data flow result=40 14:22:43 Set A/D channel type result=40 14:22:43 Set A/D encoding result=40 14:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:43 Set channel filter=0.000000e+000 result=40 14:22:43 Config A/D Result=40 14:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:43 Get A/D filter: -9.255963e+061 result=40 14:22:43 Get A/D value=-858993460 result=40 14:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:43 Aux= 14:22:43 Message to Camera, serial 54140 queued 14:22:52 Received message from Master: op=Shutter serial=54150 14:22:52 Shutter LASER close 14:22:52 Received message from Master: op=PointingHead serial=54154 14:22:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:22:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:22:53 Point started: ret=0 14:22:53 point_skyscan result=0 14:22:53 Check angles 14:22:53 SkyScan query 14:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 14:22:54 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 14:22:54 Check angles 14:22:54 SkyScan query 14:22:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.545<-20103 Statuses=0008 0009 14:22:55 Msec=750 True Az=112.995 Ze=-121.545 Az status=0008 Ze status=0009 14:22:55 Check angles 14:22:55 SkyScan query 14:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.59<-18706 Statuses=0008 0009 14:22:56 Msec=1500 True Az=112.995 Ze=-100.59 Az status=0008 Ze status=0009 14:22:56 Check angles 14:22:56 SkyScan query 14:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.62<-17308 Statuses=0008 0009 14:22:56 Msec=2250 True Az=112.995 Ze=-79.62 Az status=0008 Ze status=0009 14:22:56 Check angles 14:22:56 SkyScan query 14:22:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.215<-15881 Statuses=0008 0009 14:22:57 Msec=3000 True Az=112.995 Ze=-58.215 Az status=0008 Ze status=0009 14:22:57 Check angles 14:22:57 SkyScan query 14:22:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.29<-14486 Statuses=0008 0009 14:22:58 Msec=3750 True Az=112.995 Ze=-37.29 Az status=0008 Ze status=0009 14:22:58 Check angles 14:22:58 SkyScan query 14:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.305<-13087 Statuses=0008 0009 14:22:59 Msec=4500 True Az=112.995 Ze=-16.305 Az status=0008 Ze status=0009 14:22:59 Check angles 14:22:59 SkyScan query 14:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.515<-11699 Statuses=0008 0009 14:22:59 Msec=5250 True Az=112.995 Ze=4.515 Az status=0008 Ze status=0009 14:22:59 Check angles 14:22:59 SkyScan query 14:23:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:23:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:23:00 Message to Master queued w/err=0: serial=54154 error=0 14:23:05 Received message from Master: op=Filter serial=54155 14:23:05 Color wheel filter change from 0 to 0 14:23:05 FLIGetFilterPos err=0 currentPosition=0 14:23:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:05 Filter is already there-color wheel unchanged 14:23:05 Received message from Master: op=Shutter serial=54156 14:23:05 Shutter LASER close 14:23:05 Received message from Camera: op=State serial=54158 14:23:05 GetSingleValue result=40 Value=cccccccc 14:23:05 SkyScan query 14:23:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:23:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:06 Parameters OK 14:23:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:06 Set A/D data flow result=40 14:23:06 Set A/D channel type result=40 14:23:06 Set A/D encoding result=40 14:23:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:06 Set channel filter=0.000000e+000 result=40 14:23:06 Config A/D Result=40 14:23:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:06 Get A/D filter: -9.255963e+061 result=40 14:23:06 Get A/D value=-858993460 result=40 14:23:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:06 Parameters OK 14:23:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:06 Set A/D data flow result=40 14:23:06 Set A/D channel type result=40 14:23:06 Set A/D encoding result=40 14:23:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:06 Set channel filter=0.000000e+000 result=40 14:23:06 Config A/D Result=40 14:23:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:06 Get A/D filter: -9.255963e+061 result=40 14:23:06 Get A/D value=-858993460 result=40 14:23:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:06 Aux= 14:23:06 Message to Camera, serial 54158 queued 14:23:43 Received message from Master: op=PointingHead serial=54171 14:23:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:23:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:23:43 Point started: ret=0 14:23:43 point_skyscan result=0 14:23:44 Check angles 14:23:44 SkyScan query 14:23:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:23:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:23:44 Message to Master queued w/err=0: serial=54171 error=0 14:23:49 Received message from Master: op=Filter serial=54172 14:23:49 Color wheel filter change from 0 to 0 14:23:49 FLIGetFilterPos err=0 currentPosition=0 14:23:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:49 Filter is already there-color wheel unchanged 14:23:50 Received message from Master: op=Shutter serial=54173 14:23:50 Shutter LASER close 14:23:50 Received message from Camera: op=State serial=54175 14:23:50 GetSingleValue result=40 Value=cccccccc 14:23:50 SkyScan query 14:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:23:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:50 Parameters OK 14:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:50 Set A/D data flow result=40 14:23:50 Set A/D channel type result=40 14:23:50 Set A/D encoding result=40 14:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:50 Set channel filter=0.000000e+000 result=40 14:23:50 Config A/D Result=40 14:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:50 Get A/D filter: -9.255963e+061 result=40 14:23:50 Get A/D value=-858993460 result=40 14:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:50 Parameters OK 14:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:50 Set A/D data flow result=40 14:23:50 Set A/D channel type result=40 14:23:50 Set A/D encoding result=40 14:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:50 Set channel filter=0.000000e+000 result=40 14:23:50 Config A/D Result=40 14:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:50 Get A/D filter: -9.255963e+061 result=40 14:23:50 Get A/D value=-858993460 result=40 14:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:50 Aux= 14:23:50 Message to Camera, serial 54175 queued [UTC 2019-3-1 14:23:50] 14:24:27 Received message from Master: op=PointingHead serial=54188 14:24:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:24:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:24:28 Point started: ret=0 14:24:28 point_skyscan result=0 14:24:28 Check angles 14:24:28 SkyScan query 14:24:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:24:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:24:29 Message to Master queued w/err=0: serial=54188 error=0 14:24:34 Received message from Master: op=Filter serial=54189 14:24:34 Color wheel filter change from 0 to 0 14:24:34 FLIGetFilterPos err=0 currentPosition=0 14:24:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:34 Filter is already there-color wheel unchanged 14:24:34 Received message from Master: op=Shutter serial=54190 14:24:34 Shutter LASER close 14:24:34 Received message from Camera: op=State serial=54192 14:24:34 GetSingleValue result=40 Value=cccccccc 14:24:34 SkyScan query 14:24:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:24:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:35 Parameters OK 14:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:35 Set A/D data flow result=40 14:24:35 Set A/D channel type result=40 14:24:35 Set A/D encoding result=40 14:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:35 Set channel filter=0.000000e+000 result=40 14:24:35 Config A/D Result=40 14:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:35 Get A/D filter: -9.255963e+061 result=40 14:24:35 Get A/D value=-858993460 result=40 14:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:35 Parameters OK 14:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:35 Set A/D data flow result=40 14:24:35 Set A/D channel type result=40 14:24:35 Set A/D encoding result=40 14:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:35 Set channel filter=0.000000e+000 result=40 14:24:35 Config A/D Result=40 14:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:35 Get A/D filter: -9.255963e+061 result=40 14:24:35 Get A/D value=-858993460 result=40 14:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:35 Aux= 14:24:35 Message to Camera, serial 54192 queued 14:25:11 Received message from Master: op=PointingHead serial=54205 14:25:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:25:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:25:12 Point started: ret=0 14:25:12 point_skyscan result=0 14:25:13 Check angles 14:25:13 SkyScan query 14:25:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:25:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:25:13 Message to Master queued w/err=0: serial=54205 error=0 14:25:18 Received message from Master: op=Filter serial=54206 14:25:18 Color wheel filter change from 0 to 0 14:25:18 FLIGetFilterPos err=0 currentPosition=0 14:25:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:18 Filter is already there-color wheel unchanged 14:25:18 Received message from Master: op=Shutter serial=54207 14:25:18 Shutter LASER close 14:25:18 Received message from Camera: op=State serial=54209 14:25:18 GetSingleValue result=40 Value=cccccccc 14:25:18 SkyScan query 14:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:25:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:19 Parameters OK 14:25:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:19 Set A/D data flow result=40 14:25:19 Set A/D channel type result=40 14:25:19 Set A/D encoding result=40 14:25:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:19 Set channel filter=0.000000e+000 result=40 14:25:19 Config A/D Result=40 14:25:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:19 Get A/D filter: -9.255963e+061 result=40 14:25:19 Get A/D value=-858993460 result=40 14:25:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:19 Parameters OK 14:25:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:19 Set A/D data flow result=40 14:25:19 Set A/D channel type result=40 14:25:19 Set A/D encoding result=40 14:25:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:19 Set channel filter=0.000000e+000 result=40 14:25:19 Config A/D Result=40 14:25:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:19 Get A/D filter: -9.255963e+061 result=40 14:25:19 Get A/D value=-858993460 result=40 14:25:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:19 Aux= 14:25:19 Message to Camera, serial 54209 queued 14:25:56 Received message from Master: op=PointingHead serial=54222 14:25:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:25:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:25:56 Point started: ret=0 14:25:56 point_skyscan result=0 14:25:57 Check angles 14:25:57 SkyScan query 14:25:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 14:25:57 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 14:25:58 Check angles 14:25:58 SkyScan query 14:25:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 14:25:58 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 14:25:58 Check angles 14:25:58 SkyScan query 14:25:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 14:25:59 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 14:25:59 Check angles 14:25:59 SkyScan query 14:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.385<-17759 Statuses=0008 0009 14:26:00 Msec=2250 True Az=112.995 Ze=-86.385 Az status=0008 Ze status=0009 14:26:00 Check angles 14:26:00 SkyScan query 14:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.34<-19156 Statuses=0008 0009 14:26:00 Msec=3000 True Az=112.995 Ze=-107.34 Az status=0008 Ze status=0009 14:26:01 Check angles 14:26:01 SkyScan query 14:26:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.28<-20552 Statuses=0008 0009 14:26:01 Msec=3750 True Az=112.995 Ze=-128.28 Az status=0008 Ze status=0009 14:26:01 Check angles 14:26:01 SkyScan query 14:26:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.25<-21950 Statuses=0008 0009 14:26:02 Msec=4500 True Az=112.995 Ze=-149.25 Az status=0008 Ze status=0009 14:26:02 Check angles 14:26:02 SkyScan query 14:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.19<-23346 Statuses=0008 0009 14:26:03 Msec=5250 True Az=112.995 Ze=-170.19 Az status=0008 Ze status=0009 14:26:03 Check angles 14:26:03 SkyScan query 14:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:26:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:26:03 Message to Master queued w/err=0: serial=54222 error=0 14:26:08 Received message from Master: op=Filter serial=54223 14:26:08 Color wheel filter change from 0 to 0 14:26:08 FLIGetFilterPos err=0 currentPosition=0 14:26:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:08 Filter is already there-color wheel unchanged 14:26:09 Received message from Master: op=Shutter serial=54224 14:26:09 Shutter LASER open 14:26:09 Received message from Camera: op=State serial=54226 14:26:09 GetSingleValue result=40 Value=cccccccc 14:26:09 SkyScan query 14:26:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:26:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:09 Parameters OK 14:26:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:09 Set A/D data flow result=40 14:26:09 Set A/D channel type result=40 14:26:09 Set A/D encoding result=40 14:26:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:09 Set channel filter=0.000000e+000 result=40 14:26:09 Config A/D Result=40 14:26:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:09 Get A/D filter: -9.255963e+061 result=40 14:26:09 Get A/D value=-858993460 result=40 14:26:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:09 Parameters OK 14:26:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:09 Set A/D data flow result=40 14:26:09 Set A/D channel type result=40 14:26:09 Set A/D encoding result=40 14:26:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:09 Set channel filter=0.000000e+000 result=40 14:26:09 Config A/D Result=40 14:26:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:09 Get A/D filter: -9.255963e+061 result=40 14:26:09 Get A/D value=-858993460 result=40 14:26:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:09 Aux= 14:26:09 Message to Camera, serial 54226 queued 14:26:18 Received message from Master: op=Shutter serial=54236 14:26:18 Shutter LASER close 14:26:18 Received message from Master: op=PointingHead serial=54240 14:26:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:26:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:26:19 Point started: ret=0 14:26:19 point_skyscan result=0 14:26:19 Check angles 14:26:19 SkyScan query 14:26:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 14:26:20 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 14:26:20 Check angles 14:26:20 SkyScan query 14:26:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 14:26:21 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 14:26:21 Check angles 14:26:21 SkyScan query 14:26:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 14:26:22 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 14:26:22 Check angles 14:26:22 SkyScan query 14:26:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 14:26:22 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 14:26:22 Check angles 14:26:22 SkyScan query 14:26:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.98<-15932 Statuses=0008 0009 14:26:23 Msec=3000 True Az=112.995 Ze=-58.98 Az status=0008 Ze status=0009 14:26:23 Check angles 14:26:23 SkyScan query 14:26:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 14:26:24 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 14:26:24 Check angles 14:26:24 SkyScan query 14:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.055<-13137 Statuses=0008 0009 14:26:25 Msec=4500 True Az=112.995 Ze=-17.055 Az status=0008 Ze status=0009 14:26:25 Check angles 14:26:25 SkyScan query 14:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=3.915<-11739 Statuses=0008 0009 14:26:25 Msec=5250 True Az=112.995 Ze=3.915 Az status=0008 Ze status=0009 14:26:25 Check angles 14:26:25 SkyScan query 14:26:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:26:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:26:26 Message to Master queued w/err=0: serial=54240 error=0 14:26:31 Received message from Master: op=Filter serial=54241 14:26:31 Color wheel filter change from 0 to 0 14:26:31 FLIGetFilterPos err=0 currentPosition=0 14:26:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:31 Filter is already there-color wheel unchanged 14:26:31 Received message from Master: op=Shutter serial=54242 14:26:31 Shutter LASER close 14:26:31 Received message from Camera: op=State serial=54244 14:26:31 GetSingleValue result=40 Value=cccccccc 14:26:31 SkyScan query 14:26:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:26:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:32 Parameters OK 14:26:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:32 Set A/D data flow result=40 14:26:32 Set A/D channel type result=40 14:26:32 Set A/D encoding result=40 14:26:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:32 Set channel filter=0.000000e+000 result=40 14:26:32 Config A/D Result=40 14:26:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:32 Get A/D filter: -9.255963e+061 result=40 14:26:32 Get A/D value=-858993460 result=40 14:26:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:32 Parameters OK 14:26:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:32 Set A/D data flow result=40 14:26:32 Set A/D channel type result=40 14:26:32 Set A/D encoding result=40 14:26:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:32 Set channel filter=0.000000e+000 result=40 14:26:32 Config A/D Result=40 14:26:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:32 Get A/D filter: -9.255963e+061 result=40 14:26:32 Get A/D value=-858993460 result=40 14:26:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:32 Aux= 14:26:32 Message to Camera, serial 54244 queued 14:27:08 Received message from Master: op=PointingHead serial=54256 14:27:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:27:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:27:08 Point started: ret=0 14:27:08 point_skyscan result=0 14:27:09 Check angles 14:27:09 SkyScan query 14:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:27:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:27:10 Message to Master queued w/err=0: serial=54256 error=0 14:27:15 Received message from Master: op=Filter serial=54257 14:27:15 Color wheel filter change from 0 to 0 14:27:15 FLIGetFilterPos err=0 currentPosition=0 14:27:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:15 Filter is already there-color wheel unchanged 14:27:15 Received message from Master: op=Shutter serial=54258 14:27:15 Shutter LASER close 14:27:15 Received message from Camera: op=State serial=54260 14:27:15 GetSingleValue result=40 Value=cccccccc 14:27:15 SkyScan query 14:27:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:27:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:15 Parameters OK 14:27:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:15 Set A/D data flow result=40 14:27:15 Set A/D channel type result=40 14:27:15 Set A/D encoding result=40 14:27:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:15 Set channel filter=0.000000e+000 result=40 14:27:15 Config A/D Result=40 14:27:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:15 Get A/D filter: -9.255963e+061 result=40 14:27:15 Get A/D value=-858993460 result=40 14:27:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:15 Parameters OK 14:27:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:15 Set A/D data flow result=40 14:27:15 Set A/D channel type result=40 14:27:15 Set A/D encoding result=40 14:27:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:15 Set channel filter=0.000000e+000 result=40 14:27:15 Config A/D Result=40 14:27:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:15 Get A/D filter: -9.255963e+061 result=40 14:27:15 Get A/D value=-858993460 result=40 14:27:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:15 Aux= 14:27:15 Message to Camera, serial 54260 queued 14:27:51 Received message from Master: op=PointingHead serial=54272 14:27:51 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:27:51 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:27:52 Point started: ret=0 14:27:52 point_skyscan result=0 14:27:52 Check angles 14:27:52 SkyScan query 14:27:53 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 14:27:53 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 14:27:53 Check angles 14:27:53 SkyScan query 14:27:54 SkyScan query done: ret=0 az=153.99<-10266 ze=-6.495<-12433 Statuses=0009 0008 14:27:54 Msec=750 True Az=153.99 Ze=-6.495 Az status=0009 Ze status=0008 14:27:54 Check angles 14:27:54 SkyScan query 14:27:54 SkyScan query done: ret=0 az=171.285<-11419 ze=-6.495<-12433 Statuses=0009 0008 14:27:54 Msec=1500 True Az=171.285 Ze=-6.495 Az status=0009 Ze status=0008 14:27:55 Check angles 14:27:55 SkyScan query 14:27:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:27:55 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:27:55 Message to Master queued w/err=0: serial=54272 error=0 14:28:00 Received message from Master: op=Filter serial=54273 14:28:00 Color wheel filter change from 0 to 0 14:28:00 FLIGetFilterPos err=0 currentPosition=0 14:28:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:00 Filter is already there-color wheel unchanged 14:28:00 Received message from Master: op=Shutter serial=54274 14:28:00 Shutter LASER close 14:28:00 Received message from Camera: op=State serial=54276 14:28:00 GetSingleValue result=40 Value=cccccccc 14:28:00 SkyScan query 14:28:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:28:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:01 Parameters OK 14:28:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:01 Set A/D data flow result=40 14:28:01 Set A/D channel type result=40 14:28:01 Set A/D encoding result=40 14:28:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:01 Set channel filter=0.000000e+000 result=40 14:28:01 Config A/D Result=40 14:28:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:01 Get A/D filter: -9.255963e+061 result=40 14:28:01 Get A/D value=-858993460 result=40 14:28:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:01 Parameters OK 14:28:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:01 Set A/D data flow result=40 14:28:01 Set A/D channel type result=40 14:28:01 Set A/D encoding result=40 14:28:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:01 Set channel filter=0.000000e+000 result=40 14:28:01 Config A/D Result=40 14:28:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:01 Get A/D filter: -9.255963e+061 result=40 14:28:01 Get A/D value=-858993460 result=40 14:28:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:01 Aux= 14:28:01 Message to Camera, serial 54276 queued 14:28:38 Received message from Master: op=PointingHead serial=54289 14:28:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:28:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:28:38 Point started: ret=0 14:28:38 point_skyscan result=0 14:28:39 Check angles 14:28:39 SkyScan query 14:28:40 SkyScan query done: ret=0 az=153.045<-10203 ze=6.51<-11566 Statuses=0009 0008 14:28:40 Msec=0 True Az=153.045 Ze=6.51 Az status=0009 Ze status=0008 14:28:40 Check angles 14:28:40 SkyScan query 14:28:40 SkyScan query done: ret=0 az=135.465<-9031 ze=6.495<-11567 Statuses=0009 0008 14:28:40 Msec=750 True Az=135.465 Ze=6.495 Az status=0009 Ze status=0008 14:28:41 Check angles 14:28:41 SkyScan query 14:28:41 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 14:28:41 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 14:28:41 Check angles 14:28:41 SkyScan query 14:28:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:28:42 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:28:42 Message to Master queued w/err=0: serial=54289 error=0 14:28:47 Received message from Master: op=Filter serial=54290 14:28:47 Color wheel filter change from 0 to 0 14:28:47 FLIGetFilterPos err=0 currentPosition=0 14:28:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:47 Filter is already there-color wheel unchanged 14:28:47 Received message from Master: op=Shutter serial=54291 14:28:47 Shutter LASER close 14:28:47 Received message from Camera: op=State serial=54293 14:28:47 GetSingleValue result=40 Value=cccccccc 14:28:47 SkyScan query 14:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:28:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:48 Parameters OK 14:28:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:48 Set A/D data flow result=40 14:28:48 Set A/D channel type result=40 14:28:48 Set A/D encoding result=40 14:28:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:48 Set channel filter=0.000000e+000 result=40 14:28:48 Config A/D Result=40 14:28:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:48 Get A/D filter: -9.255963e+061 result=40 14:28:48 Get A/D value=-858993460 result=40 14:28:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:48 Parameters OK 14:28:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:48 Set A/D data flow result=40 14:28:48 Set A/D channel type result=40 14:28:48 Set A/D encoding result=40 14:28:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:48 Set channel filter=0.000000e+000 result=40 14:28:48 Config A/D Result=40 14:28:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:48 Get A/D filter: -9.255963e+061 result=40 14:28:48 Get A/D value=-858993460 result=40 14:28:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:48 Aux= 14:28:48 Message to Camera, serial 54293 queued 14:29:24 Received message from Master: op=PointingHead serial=54306 14:29:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:29:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:29:25 Point started: ret=0 14:29:25 point_skyscan result=0 14:29:26 Check angles 14:29:26 SkyScan query 14:29:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.98<-13532 Statuses=0008 0009 14:29:26 Msec=0 True Az=112.995 Ze=-22.98 Az status=0008 Ze status=0009 14:29:26 Check angles 14:29:26 SkyScan query 14:29:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.965<-14931 Statuses=0008 0009 14:29:27 Msec=750 True Az=112.995 Ze=-43.965 Az status=0008 Ze status=0009 14:29:27 Check angles 14:29:27 SkyScan query 14:29:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.92<-16328 Statuses=0008 0009 14:29:28 Msec=1500 True Az=112.995 Ze=-64.92 Az status=0008 Ze status=0009 14:29:28 Check angles 14:29:28 SkyScan query 14:29:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.875<-17725 Statuses=0008 0009 14:29:28 Msec=2250 True Az=112.995 Ze=-85.875 Az status=0008 Ze status=0009 14:29:29 Check angles 14:29:29 SkyScan query 14:29:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.815<-19121 Statuses=0008 0009 14:29:29 Msec=3000 True Az=112.995 Ze=-106.815 Az status=0008 Ze status=0009 14:29:29 Check angles 14:29:29 SkyScan query 14:29:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.785<-20519 Statuses=0008 0009 14:29:30 Msec=3750 True Az=112.995 Ze=-127.785 Az status=0008 Ze status=0009 14:29:30 Check angles 14:29:30 SkyScan query 14:29:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.725<-21915 Statuses=0008 0009 14:29:31 Msec=4500 True Az=112.995 Ze=-148.725 Az status=0008 Ze status=0009 14:29:31 Check angles 14:29:31 SkyScan query 14:29:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.665<-23311 Statuses=0008 0009 14:29:31 Msec=5250 True Az=112.995 Ze=-169.665 Az status=0008 Ze status=0009 14:29:32 Check angles 14:29:32 SkyScan query 14:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:29:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:29:32 Message to Master queued w/err=0: serial=54306 error=0 14:29:37 Received message from Master: op=Filter serial=54307 14:29:37 Color wheel filter change from 0 to 0 14:29:37 FLIGetFilterPos err=0 currentPosition=0 14:29:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:37 Filter is already there-color wheel unchanged 14:29:37 Received message from Master: op=Shutter serial=54308 14:29:37 Shutter LASER open 14:29:38 Received message from Camera: op=State serial=54310 14:29:38 GetSingleValue result=40 Value=cccccccc 14:29:38 SkyScan query 14:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:29:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:38 Parameters OK 14:29:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:38 Set A/D data flow result=40 14:29:38 Set A/D channel type result=40 14:29:38 Set A/D encoding result=40 14:29:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:38 Set channel filter=0.000000e+000 result=40 14:29:38 Config A/D Result=40 14:29:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:38 Get A/D filter: -9.255963e+061 result=40 14:29:38 Get A/D value=-858993460 result=40 14:29:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:38 Parameters OK 14:29:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:38 Set A/D data flow result=40 14:29:38 Set A/D channel type result=40 14:29:38 Set A/D encoding result=40 14:29:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:38 Set channel filter=0.000000e+000 result=40 14:29:38 Config A/D Result=40 14:29:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:38 Get A/D filter: -9.255963e+061 result=40 14:29:38 Get A/D value=-858993460 result=40 14:29:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:38 Aux= 14:29:38 Message to Camera, serial 54310 queued 14:29:47 Received message from Master: op=Shutter serial=54320 14:29:47 Shutter LASER close 14:29:47 Received message from Master: op=PointingHead serial=54324 14:29:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:29:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:29:47 Point started: ret=0 14:29:47 point_skyscan result=0 14:29:48 Check angles 14:29:48 SkyScan query 14:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 14:29:49 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 14:29:49 Check angles 14:29:49 SkyScan query 14:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.46<-20164 Statuses=0008 0009 14:29:49 Msec=750 True Az=112.995 Ze=-122.46 Az status=0008 Ze status=0009 14:29:50 Check angles 14:29:50 SkyScan query 14:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.475<-18765 Statuses=0008 0009 14:29:50 Msec=1500 True Az=112.995 Ze=-101.475 Az status=0008 Ze status=0009 14:29:50 Check angles 14:29:50 SkyScan query 14:29:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.52<-17368 Statuses=0008 0009 14:29:51 Msec=2250 True Az=112.995 Ze=-80.52 Az status=0008 Ze status=0009 14:29:51 Check angles 14:29:51 SkyScan query 14:29:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.595<-15973 Statuses=0008 0009 14:29:52 Msec=3000 True Az=112.995 Ze=-59.595 Az status=0008 Ze status=0009 14:29:52 Check angles 14:29:52 SkyScan query 14:29:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.655<-14577 Statuses=0008 0009 14:29:52 Msec=3750 True Az=112.995 Ze=-38.655 Az status=0008 Ze status=0009 14:29:53 Check angles 14:29:53 SkyScan query 14:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.685<-13179 Statuses=0008 0009 14:29:53 Msec=4500 True Az=112.995 Ze=-17.685 Az status=0008 Ze status=0009 14:29:53 Check angles 14:29:53 SkyScan query 14:29:54 SkyScan query done: ret=0 az=112.995<-7533 ze=3.255<-11783 Statuses=0008 0009 14:29:54 Msec=5250 True Az=112.995 Ze=3.255 Az status=0008 Ze status=0009 14:29:54 Check angles 14:29:54 SkyScan query 14:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:29:55 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:29:55 Message to Master queued w/err=0: serial=54324 error=0 14:30:00 Received message from Master: op=Filter serial=54325 14:30:00 Color wheel filter change from 0 to 0 14:30:00 FLIGetFilterPos err=0 currentPosition=0 14:30:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:00 Filter is already there-color wheel unchanged 14:30:00 Received message from Master: op=Shutter serial=54326 14:30:00 Shutter LASER close 14:30:00 Received message from Camera: op=State serial=54328 14:30:00 GetSingleValue result=40 Value=cccccccc 14:30:00 SkyScan query 14:30:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:30:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:01 Parameters OK 14:30:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:01 Set A/D data flow result=40 14:30:01 Set A/D channel type result=40 14:30:01 Set A/D encoding result=40 14:30:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:01 Set channel filter=0.000000e+000 result=40 14:30:01 Config A/D Result=40 14:30:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:01 Get A/D filter: -9.255963e+061 result=40 14:30:01 Get A/D value=-858993460 result=40 14:30:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:01 Parameters OK 14:30:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:01 Set A/D data flow result=40 14:30:01 Set A/D channel type result=40 14:30:01 Set A/D encoding result=40 14:30:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:01 Set channel filter=0.000000e+000 result=40 14:30:01 Config A/D Result=40 14:30:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:01 Get A/D filter: -9.255963e+061 result=40 14:30:01 Get A/D value=-858993460 result=40 14:30:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:01 Aux= 14:30:01 Message to Camera, serial 54328 queued 14:30:37 Received message from Master: op=PointingHead serial=54341 14:30:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:30:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:30:38 Point started: ret=0 14:30:38 point_skyscan result=0 14:30:39 Check angles 14:30:39 SkyScan query 14:30:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:30:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:30:39 Message to Master queued w/err=0: serial=54341 error=0 14:30:44 Received message from Master: op=Filter serial=54342 14:30:44 Color wheel filter change from 0 to 0 14:30:44 FLIGetFilterPos err=0 currentPosition=0 14:30:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:44 Filter is already there-color wheel unchanged 14:30:45 Received message from Master: op=Shutter serial=54343 14:30:45 Shutter LASER close 14:30:46 Received message from Camera: op=State serial=54345 14:30:46 GetSingleValue result=40 Value=cccccccc 14:30:46 SkyScan query 14:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:30:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:46 Parameters OK 14:30:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:46 Set A/D data flow result=40 14:30:46 Set A/D channel type result=40 14:30:46 Set A/D encoding result=40 14:30:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:46 Set channel filter=0.000000e+000 result=40 14:30:46 Config A/D Result=40 14:30:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:46 Get A/D filter: -9.255963e+061 result=40 14:30:46 Get A/D value=-858993460 result=40 14:30:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:46 Parameters OK 14:30:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:46 Set A/D data flow result=40 14:30:46 Set A/D channel type result=40 14:30:46 Set A/D encoding result=40 14:30:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:46 Set channel filter=0.000000e+000 result=40 14:30:46 Config A/D Result=40 14:30:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:46 Get A/D filter: -9.255963e+061 result=40 14:30:46 Get A/D value=-858993460 result=40 14:30:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:46 Aux= 14:30:46 Message to Camera, serial 54345 queued 14:31:23 Received message from Master: op=PointingHead serial=54357 14:31:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:31:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:31:24 Point started: ret=0 14:31:24 point_skyscan result=0 14:31:24 Check angles 14:31:24 SkyScan query 14:31:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:31:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:31:25 Message to Master queued w/err=0: serial=54357 error=0 14:31:30 Received message from Master: op=Filter serial=54358 14:31:30 Color wheel filter change from 0 to 0 14:31:30 FLIGetFilterPos err=0 currentPosition=0 14:31:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:30 Filter is already there-color wheel unchanged 14:31:31 Received message from Master: op=Shutter serial=54359 14:31:31 Shutter LASER close 14:31:31 Received message from Camera: op=State serial=54361 14:31:31 GetSingleValue result=40 Value=cccccccc 14:31:31 SkyScan query 14:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:31:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:32 Parameters OK 14:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:32 Set A/D data flow result=40 14:31:32 Set A/D channel type result=40 14:31:32 Set A/D encoding result=40 14:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:32 Set channel filter=0.000000e+000 result=40 14:31:32 Config A/D Result=40 14:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:32 Get A/D filter: -9.255963e+061 result=40 14:31:32 Get A/D value=-858993460 result=40 14:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:32 Parameters OK 14:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:32 Set A/D data flow result=40 14:31:32 Set A/D channel type result=40 14:31:32 Set A/D encoding result=40 14:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:32 Set channel filter=0.000000e+000 result=40 14:31:32 Config A/D Result=40 14:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:32 Get A/D filter: -9.255963e+061 result=40 14:31:32 Get A/D value=-858993460 result=40 14:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:32 Aux= 14:31:32 Message to Camera, serial 54361 queued 14:32:09 Received message from Master: op=PointingHead serial=54373 14:32:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:32:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:32:10 Point started: ret=0 14:32:10 point_skyscan result=0 14:32:10 Check angles 14:32:10 SkyScan query 14:32:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:32:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:32:11 Message to Master queued w/err=0: serial=54373 error=0 14:32:16 Received message from Master: op=Filter serial=54374 14:32:16 Color wheel filter change from 0 to 0 14:32:16 FLIGetFilterPos err=0 currentPosition=0 14:32:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:16 Filter is already there-color wheel unchanged 14:32:17 Received message from Master: op=Shutter serial=54375 14:32:17 Shutter LASER close 14:32:17 Received message from Camera: op=State serial=54377 14:32:17 GetSingleValue result=40 Value=cccccccc 14:32:17 SkyScan query 14:32:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:32:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:18 Parameters OK 14:32:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:18 Set A/D data flow result=40 14:32:18 Set A/D channel type result=40 14:32:18 Set A/D encoding result=40 14:32:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:18 Set channel filter=0.000000e+000 result=40 14:32:18 Config A/D Result=40 14:32:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:18 Get A/D filter: -9.255963e+061 result=40 14:32:18 Get A/D value=-858993460 result=40 14:32:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:18 Parameters OK 14:32:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:18 Set A/D data flow result=40 14:32:18 Set A/D channel type result=40 14:32:18 Set A/D encoding result=40 14:32:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:18 Set channel filter=0.000000e+000 result=40 14:32:18 Config A/D Result=40 14:32:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:18 Get A/D filter: -9.255963e+061 result=40 14:32:18 Get A/D value=-858993460 result=40 14:32:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:18 Aux= 14:32:18 Message to Camera, serial 54377 queued 14:32:54 Received message from Master: op=PointingHead serial=54389 14:32:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:32:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:32:54 Point started: ret=0 14:32:54 point_skyscan result=0 14:32:55 Check angles 14:32:55 SkyScan query 14:32:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 14:32:56 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 14:32:56 Check angles 14:32:56 SkyScan query 14:32:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 14:32:56 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 14:32:57 Check angles 14:32:57 SkyScan query 14:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 14:32:57 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 14:32:57 Check angles 14:32:57 SkyScan query 14:32:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 14:32:58 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 14:32:58 Check angles 14:32:58 SkyScan query 14:32:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.19<-19146 Statuses=0008 0009 14:32:59 Msec=3000 True Az=112.995 Ze=-107.19 Az status=0008 Ze status=0009 14:32:59 Check angles 14:32:59 SkyScan query 14:32:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.085<-20539 Statuses=0008 0009 14:32:59 Msec=3750 True Az=112.995 Ze=-128.085 Az status=0008 Ze status=0009 14:33:00 Check angles 14:33:00 SkyScan query 14:33:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.055<-21937 Statuses=0008 0009 14:33:00 Msec=4500 True Az=112.995 Ze=-149.055 Az status=0008 Ze status=0009 14:33:00 Check angles 14:33:00 SkyScan query 14:33:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.01<-23334 Statuses=0008 0009 14:33:01 Msec=5250 True Az=112.995 Ze=-170.01 Az status=0008 Ze status=0009 14:33:01 Check angles 14:33:01 SkyScan query 14:33:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:33:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:33:02 Message to Master queued w/err=0: serial=54389 error=0 14:33:07 Received message from Master: op=Filter serial=54390 14:33:07 Color wheel filter change from 0 to 0 14:33:07 FLIGetFilterPos err=0 currentPosition=0 14:33:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:07 Filter is already there-color wheel unchanged 14:33:07 Received message from Master: op=Shutter serial=54391 14:33:07 Shutter LASER open 14:33:07 Received message from Camera: op=State serial=54393 14:33:07 GetSingleValue result=40 Value=cccccccc 14:33:07 SkyScan query 14:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:33:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:08 Parameters OK 14:33:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:08 Set A/D data flow result=40 14:33:08 Set A/D channel type result=40 14:33:08 Set A/D encoding result=40 14:33:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:08 Set channel filter=0.000000e+000 result=40 14:33:08 Config A/D Result=40 14:33:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:08 Get A/D filter: -9.255963e+061 result=40 14:33:08 Get A/D value=-858993460 result=40 14:33:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:08 Parameters OK 14:33:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:08 Set A/D data flow result=40 14:33:08 Set A/D channel type result=40 14:33:08 Set A/D encoding result=40 14:33:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:08 Set channel filter=0.000000e+000 result=40 14:33:08 Config A/D Result=40 14:33:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:08 Get A/D filter: -9.255963e+061 result=40 14:33:08 Get A/D value=-858993460 result=40 14:33:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:08 Aux= 14:33:08 Message to Camera, serial 54393 queued 14:33:16 Received message from Master: op=Shutter serial=54403 14:33:16 Shutter LASER close 14:33:17 Received message from Master: op=PointingHead serial=54407 14:33:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:33:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:33:18 Point started: ret=0 14:33:18 point_skyscan result=0 14:33:18 Check angles 14:33:18 SkyScan query 14:33:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 14:33:19 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 14:33:19 Check angles 14:33:19 SkyScan query 14:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 14:33:20 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 14:33:20 Check angles 14:33:20 SkyScan query 14:33:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.08<-18672 Statuses=0008 0009 14:33:21 Msec=1500 True Az=112.995 Ze=-100.08 Az status=0008 Ze status=0009 14:33:21 Check angles 14:33:21 SkyScan query 14:33:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.725<-17315 Statuses=0008 0009 14:33:21 Msec=2250 True Az=112.995 Ze=-79.725 Az status=0008 Ze status=0009 14:33:21 Check angles 14:33:21 SkyScan query 14:33:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.695<-15913 Statuses=0008 0009 14:33:22 Msec=3000 True Az=112.995 Ze=-58.695 Az status=0008 Ze status=0009 14:33:22 Check angles 14:33:22 SkyScan query 14:33:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.815<-14521 Statuses=0008 0009 14:33:23 Msec=3750 True Az=112.995 Ze=-37.815 Az status=0008 Ze status=0009 14:33:23 Check angles 14:33:23 SkyScan query 14:33:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.77<-13118 Statuses=0008 0009 14:33:24 Msec=4500 True Az=112.995 Ze=-16.77 Az status=0008 Ze status=0009 14:33:24 Check angles 14:33:24 SkyScan query 14:33:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.08<-11728 Statuses=0008 0009 14:33:24 Msec=5250 True Az=112.995 Ze=4.08 Az status=0008 Ze status=0009 14:33:24 Check angles 14:33:24 SkyScan query 14:33:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:33:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:33:25 Message to Master queued w/err=0: serial=54407 error=0 14:33:30 Received message from Master: op=Filter serial=54408 14:33:30 Color wheel filter change from 0 to 0 14:33:30 FLIGetFilterPos err=0 currentPosition=0 14:33:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:30 Filter is already there-color wheel unchanged 14:33:31 Received message from Master: op=Shutter serial=54409 14:33:31 Shutter LASER close 14:33:31 Received message from Camera: op=State serial=54411 14:33:31 GetSingleValue result=40 Value=cccccccc 14:33:31 SkyScan query 14:33:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:33:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:32 Parameters OK 14:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:32 Set A/D data flow result=40 14:33:32 Set A/D channel type result=40 14:33:32 Set A/D encoding result=40 14:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:32 Set channel filter=0.000000e+000 result=40 14:33:32 Config A/D Result=40 14:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:32 Get A/D filter: -9.255963e+061 result=40 14:33:32 Get A/D value=-858993460 result=40 14:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:32 Parameters OK 14:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:32 Set A/D data flow result=40 14:33:32 Set A/D channel type result=40 14:33:32 Set A/D encoding result=40 14:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:32 Set channel filter=0.000000e+000 result=40 14:33:32 Config A/D Result=40 14:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:32 Get A/D filter: -9.255963e+061 result=40 14:33:32 Get A/D value=-858993460 result=40 14:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:32 Aux= 14:33:32 Message to Camera, serial 54411 queued 14:33:38 Received message from Master: op=Identify serial=54412 14:34:08 Received message from Master: op=PointingHead serial=54426 14:34:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:34:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:34:09 Point started: ret=0 14:34:09 point_skyscan result=0 14:34:10 Check angles 14:34:10 SkyScan query 14:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:34:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:34:10 Message to Master queued w/err=0: serial=54426 error=0 14:34:15 Received message from Master: op=Filter serial=54427 14:34:15 Color wheel filter change from 0 to 0 14:34:15 FLIGetFilterPos err=0 currentPosition=0 14:34:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:15 Filter is already there-color wheel unchanged 14:34:16 Received message from Master: op=Shutter serial=54428 14:34:16 Shutter LASER close 14:34:16 Received message from Camera: op=State serial=54430 14:34:16 GetSingleValue result=40 Value=cccccccc 14:34:16 SkyScan query 14:34:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:34:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:17 Parameters OK 14:34:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:17 Set A/D data flow result=40 14:34:17 Set A/D channel type result=40 14:34:17 Set A/D encoding result=40 14:34:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:17 Set channel filter=0.000000e+000 result=40 14:34:17 Config A/D Result=40 14:34:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:17 Get A/D filter: -9.255963e+061 result=40 14:34:17 Get A/D value=-858993460 result=40 14:34:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:17 Parameters OK 14:34:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:17 Set A/D data flow result=40 14:34:17 Set A/D channel type result=40 14:34:17 Set A/D encoding result=40 14:34:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:17 Set channel filter=0.000000e+000 result=40 14:34:17 Config A/D Result=40 14:34:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:17 Get A/D filter: -9.255963e+061 result=40 14:34:17 Get A/D value=-858993460 result=40 14:34:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:17 Aux= 14:34:17 Message to Camera, serial 54430 queued 14:34:53 Received message from Master: op=PointingHead serial=54442 14:34:53 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:34:53 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:34:54 Point started: ret=0 14:34:54 point_skyscan result=0 14:34:54 Check angles 14:34:54 SkyScan query 14:34:55 SkyScan query done: ret=0 az=136.71<-9114 ze=-6.51<-12434 Statuses=0009 0008 14:34:55 Msec=0 True Az=136.71 Ze=-6.51 Az status=0009 Ze status=0008 14:34:55 Check angles 14:34:55 SkyScan query [UTC 2019-3-1 14:34:56] 14:34:56 SkyScan query done: ret=0 az=154.395<-10293 ze=-6.495<-12433 Statuses=0009 0008 14:34:56 Msec=750 True Az=154.395 Ze=-6.495 Az status=0009 Ze status=0008 14:34:56 Check angles 14:34:56 SkyScan query 14:34:57 SkyScan query done: ret=0 az=173.49<-11566 ze=-6.495<-12433 Statuses=0009 0008 14:34:57 Msec=1500 True Az=173.49 Ze=-6.495 Az status=0009 Ze status=0008 14:34:57 Check angles 14:34:57 SkyScan query 14:34:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:34:57 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:34:57 Message to Master queued w/err=0: serial=54442 error=0 14:35:02 Received message from Master: op=Filter serial=54443 14:35:02 Color wheel filter change from 0 to 0 14:35:02 FLIGetFilterPos err=0 currentPosition=0 14:35:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:02 Filter is already there-color wheel unchanged 14:35:03 Received message from Master: op=Shutter serial=54444 14:35:03 Shutter LASER close 14:35:03 Received message from Camera: op=State serial=54446 14:35:03 GetSingleValue result=40 Value=cccccccc 14:35:03 SkyScan query 14:35:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:35:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:03 Parameters OK 14:35:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:03 Set A/D data flow result=40 14:35:03 Set A/D channel type result=40 14:35:03 Set A/D encoding result=40 14:35:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:03 Set channel filter=0.000000e+000 result=40 14:35:03 Config A/D Result=40 14:35:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:03 Get A/D filter: -9.255963e+061 result=40 14:35:03 Get A/D value=-858993460 result=40 14:35:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:03 Parameters OK 14:35:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:03 Set A/D data flow result=40 14:35:03 Set A/D channel type result=40 14:35:03 Set A/D encoding result=40 14:35:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:03 Set channel filter=0.000000e+000 result=40 14:35:03 Config A/D Result=40 14:35:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:03 Get A/D filter: -9.255963e+061 result=40 14:35:03 Get A/D value=-858993460 result=40 14:35:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:03 Aux= 14:35:03 Message to Camera, serial 54446 queued 14:35:40 Received message from Master: op=PointingHead serial=54459 14:35:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:35:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:35:41 Point started: ret=0 14:35:41 point_skyscan result=0 14:35:41 Check angles 14:35:41 SkyScan query 14:35:42 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 14:35:42 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 14:35:42 Check angles 14:35:42 SkyScan query 14:35:43 SkyScan query done: ret=0 az=135.66<-9044 ze=6.495<-11567 Statuses=0009 0008 14:35:43 Msec=750 True Az=135.66 Ze=6.495 Az status=0009 Ze status=0008 14:35:43 Check angles 14:35:43 SkyScan query 14:35:43 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 14:35:43 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 14:35:44 Check angles 14:35:44 SkyScan query 14:35:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:35:44 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:35:44 Message to Master queued w/err=0: serial=54459 error=0 14:35:49 Received message from Master: op=Filter serial=54460 14:35:49 Color wheel filter change from 0 to 0 14:35:49 FLIGetFilterPos err=0 currentPosition=0 14:35:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:49 Filter is already there-color wheel unchanged 14:35:49 Received message from Master: op=Shutter serial=54461 14:35:49 Shutter LASER close 14:35:49 Received message from Camera: op=State serial=54463 14:35:49 GetSingleValue result=40 Value=cccccccc 14:35:49 SkyScan query 14:35:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:35:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:50 Parameters OK 14:35:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:50 Set A/D data flow result=40 14:35:50 Set A/D channel type result=40 14:35:50 Set A/D encoding result=40 14:35:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:50 Set channel filter=0.000000e+000 result=40 14:35:50 Config A/D Result=40 14:35:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:50 Get A/D filter: -9.255963e+061 result=40 14:35:50 Get A/D value=-858993460 result=40 14:35:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:50 Parameters OK 14:35:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:50 Set A/D data flow result=40 14:35:50 Set A/D channel type result=40 14:35:50 Set A/D encoding result=40 14:35:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:50 Set channel filter=0.000000e+000 result=40 14:35:50 Config A/D Result=40 14:35:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:50 Get A/D filter: -9.255963e+061 result=40 14:35:50 Get A/D value=-858993460 result=40 14:35:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:50 Aux= 14:35:50 Message to Camera, serial 54463 queued 14:36:27 Received message from Master: op=PointingHead serial=54476 14:36:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:36:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:36:27 Point started: ret=0 14:36:27 point_skyscan result=0 14:36:28 Check angles 14:36:28 SkyScan query 14:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 14:36:29 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 14:36:29 Check angles 14:36:29 SkyScan query 14:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 14:36:29 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 14:36:29 Check angles 14:36:29 SkyScan query 14:36:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 14:36:30 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 14:36:30 Check angles 14:36:30 SkyScan query 14:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.355<-17757 Statuses=0008 0009 14:36:31 Msec=2250 True Az=112.995 Ze=-86.355 Az status=0008 Ze status=0009 14:36:31 Check angles 14:36:31 SkyScan query 14:36:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.31<-19154 Statuses=0008 0009 14:36:32 Msec=3000 True Az=112.995 Ze=-107.31 Az status=0008 Ze status=0009 14:36:32 Check angles 14:36:32 SkyScan query 14:36:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 14:36:32 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 14:36:32 Check angles 14:36:32 SkyScan query 14:36:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 14:36:33 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 14:36:33 Check angles 14:36:33 SkyScan query 14:36:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.58<-23372 Statuses=0008 0009 14:36:34 Msec=5250 True Az=112.995 Ze=-170.58 Az status=0008 Ze status=0009 14:36:34 Check angles 14:36:34 SkyScan query 14:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:36:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:36:35 Message to Master queued w/err=0: serial=54476 error=0 14:36:40 Received message from Master: op=Filter serial=54477 14:36:40 Color wheel filter change from 0 to 0 14:36:40 FLIGetFilterPos err=0 currentPosition=0 14:36:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:40 Filter is already there-color wheel unchanged 14:36:40 Received message from Master: op=Shutter serial=54478 14:36:40 Shutter LASER open 14:36:40 Received message from Camera: op=State serial=54480 14:36:40 GetSingleValue result=40 Value=cccccccc 14:36:40 SkyScan query 14:36:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:36:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:40 Parameters OK 14:36:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:40 Set A/D data flow result=40 14:36:40 Set A/D channel type result=40 14:36:40 Set A/D encoding result=40 14:36:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:40 Set channel filter=0.000000e+000 result=40 14:36:40 Config A/D Result=40 14:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:40 Get A/D filter: -9.255963e+061 result=40 14:36:40 Get A/D value=-858993460 result=40 14:36:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:40 Parameters OK 14:36:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:40 Set A/D data flow result=40 14:36:40 Set A/D channel type result=40 14:36:40 Set A/D encoding result=40 14:36:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:40 Set channel filter=0.000000e+000 result=40 14:36:40 Config A/D Result=40 14:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:40 Get A/D filter: -9.255963e+061 result=40 14:36:40 Get A/D value=-858993460 result=40 14:36:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:40 Aux= 14:36:40 Message to Camera, serial 54480 queued 14:36:49 Received message from Master: op=Shutter serial=54490 14:36:49 Shutter LASER close 14:36:49 Received message from Master: op=PointingHead serial=54494 14:36:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:36:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:36:50 Point started: ret=0 14:36:50 point_skyscan result=0 14:36:50 Check angles 14:36:50 SkyScan query 14:36:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 14:36:51 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 14:36:51 Check angles 14:36:51 SkyScan query 14:36:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 14:36:52 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 14:36:52 Check angles 14:36:52 SkyScan query 14:36:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 14:36:53 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 14:36:53 Check angles 14:36:53 SkyScan query 14:36:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.95<-17330 Statuses=0008 0009 14:36:53 Msec=2250 True Az=112.995 Ze=-79.95 Az status=0008 Ze status=0009 14:36:53 Check angles 14:36:53 SkyScan query 14:36:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 14:36:54 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 14:36:54 Check angles 14:36:54 SkyScan query 14:36:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.025<-14535 Statuses=0008 0009 14:36:55 Msec=3750 True Az=112.995 Ze=-38.025 Az status=0008 Ze status=0009 14:36:55 Check angles 14:36:55 SkyScan query 14:36:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 14:36:56 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 14:36:56 Check angles 14:36:56 SkyScan query 14:36:56 SkyScan query done: ret=0 az=112.995<-7533 ze=3.9<-11740 Statuses=0008 0009 14:36:56 Msec=5250 True Az=112.995 Ze=3.9 Az status=0008 Ze status=0009 14:36:56 Check angles 14:36:56 SkyScan query 14:36:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:36:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:36:57 Message to Master queued w/err=0: serial=54494 error=0 14:37:02 Received message from Master: op=Filter serial=54495 14:37:02 Color wheel filter change from 0 to 0 14:37:02 FLIGetFilterPos err=0 currentPosition=0 14:37:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:02 Filter is already there-color wheel unchanged 14:37:02 Received message from Master: op=Shutter serial=54496 14:37:02 Shutter LASER close 14:37:02 Received message from Camera: op=State serial=54498 14:37:02 GetSingleValue result=40 Value=cccccccc 14:37:02 SkyScan query 14:37:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:37:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:03 Parameters OK 14:37:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:03 Set A/D data flow result=40 14:37:03 Set A/D channel type result=40 14:37:03 Set A/D encoding result=40 14:37:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:03 Set channel filter=0.000000e+000 result=40 14:37:03 Config A/D Result=40 14:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:03 Get A/D filter: -9.255963e+061 result=40 14:37:03 Get A/D value=-858993460 result=40 14:37:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:03 Parameters OK 14:37:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:03 Set A/D data flow result=40 14:37:03 Set A/D channel type result=40 14:37:03 Set A/D encoding result=40 14:37:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:03 Set channel filter=0.000000e+000 result=40 14:37:03 Config A/D Result=40 14:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:03 Get A/D filter: -9.255963e+061 result=40 14:37:03 Get A/D value=-858993460 result=40 14:37:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:03 Aux= 14:37:03 Message to Camera, serial 54498 queued 14:37:40 Received message from Master: op=PointingHead serial=54511 14:37:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:37:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:37:40 Point started: ret=0 14:37:40 point_skyscan result=0 14:37:41 Check angles 14:37:41 SkyScan query 14:37:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:37:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:37:41 Message to Master queued w/err=0: serial=54511 error=0 14:37:46 Received message from Master: op=Filter serial=54512 14:37:46 Color wheel filter change from 0 to 0 14:37:46 FLIGetFilterPos err=0 currentPosition=0 14:37:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:46 Filter is already there-color wheel unchanged 14:37:47 Received message from Master: op=Shutter serial=54513 14:37:47 Shutter LASER close 14:37:47 Received message from Camera: op=State serial=54515 14:37:47 GetSingleValue result=40 Value=cccccccc 14:37:47 SkyScan query 14:37:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:37:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:47 Parameters OK 14:37:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:47 Set A/D data flow result=40 14:37:47 Set A/D channel type result=40 14:37:47 Set A/D encoding result=40 14:37:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:47 Set channel filter=0.000000e+000 result=40 14:37:47 Config A/D Result=40 14:37:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:47 Get A/D filter: -9.255963e+061 result=40 14:37:47 Get A/D value=-858993460 result=40 14:37:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:47 Parameters OK 14:37:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:47 Set A/D data flow result=40 14:37:47 Set A/D channel type result=40 14:37:47 Set A/D encoding result=40 14:37:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:47 Set channel filter=0.000000e+000 result=40 14:37:47 Config A/D Result=40 14:37:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:47 Get A/D filter: -9.255963e+061 result=40 14:37:47 Get A/D value=-858993460 result=40 14:37:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:47 Aux= 14:37:47 Message to Camera, serial 54515 queued 14:38:23 Received message from Master: op=PointingHead serial=54527 14:38:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:38:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:38:24 Point started: ret=0 14:38:24 point_skyscan result=0 14:38:24 Check angles 14:38:24 SkyScan query 14:38:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:38:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:38:25 Message to Master queued w/err=0: serial=54527 error=0 14:38:30 Received message from Master: op=Filter serial=54528 14:38:30 Color wheel filter change from 0 to 0 14:38:30 FLIGetFilterPos err=0 currentPosition=0 14:38:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:30 Filter is already there-color wheel unchanged 14:38:30 Received message from Master: op=Shutter serial=54529 14:38:30 Shutter LASER close 14:38:30 Received message from Camera: op=State serial=54531 14:38:30 GetSingleValue result=40 Value=cccccccc 14:38:30 SkyScan query 14:38:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:38:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:31 Parameters OK 14:38:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:31 Set A/D data flow result=40 14:38:31 Set A/D channel type result=40 14:38:31 Set A/D encoding result=40 14:38:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:31 Set channel filter=0.000000e+000 result=40 14:38:31 Config A/D Result=40 14:38:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:31 Get A/D filter: -9.255963e+061 result=40 14:38:31 Get A/D value=-858993460 result=40 14:38:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:31 Parameters OK 14:38:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:31 Set A/D data flow result=40 14:38:31 Set A/D channel type result=40 14:38:31 Set A/D encoding result=40 14:38:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:31 Set channel filter=0.000000e+000 result=40 14:38:31 Config A/D Result=40 14:38:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:31 Get A/D filter: -9.255963e+061 result=40 14:38:31 Get A/D value=-858993460 result=40 14:38:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:31 Aux= 14:38:31 Message to Camera, serial 54531 queued 14:39:07 Received message from Master: op=PointingHead serial=54544 14:39:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:39:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:39:08 Point started: ret=0 14:39:08 point_skyscan result=0 14:39:09 Check angles 14:39:09 SkyScan query 14:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:39:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:39:09 Message to Master queued w/err=0: serial=54544 error=0 14:39:14 Received message from Master: op=Filter serial=54545 14:39:14 Color wheel filter change from 0 to 0 14:39:14 FLIGetFilterPos err=0 currentPosition=0 14:39:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:14 Filter is already there-color wheel unchanged 14:39:14 Received message from Master: op=Shutter serial=54546 14:39:14 Shutter LASER close 14:39:14 Received message from Camera: op=State serial=54548 14:39:14 GetSingleValue result=40 Value=cccccccc 14:39:14 SkyScan query 14:39:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:39:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:15 Parameters OK 14:39:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:15 Set A/D data flow result=40 14:39:15 Set A/D channel type result=40 14:39:15 Set A/D encoding result=40 14:39:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:15 Set channel filter=0.000000e+000 result=40 14:39:15 Config A/D Result=40 14:39:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:15 Get A/D filter: -9.255963e+061 result=40 14:39:15 Get A/D value=-858993460 result=40 14:39:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:15 Parameters OK 14:39:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:15 Set A/D data flow result=40 14:39:15 Set A/D channel type result=40 14:39:15 Set A/D encoding result=40 14:39:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:15 Set channel filter=0.000000e+000 result=40 14:39:15 Config A/D Result=40 14:39:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:15 Get A/D filter: -9.255963e+061 result=40 14:39:15 Get A/D value=-858993460 result=40 14:39:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:15 Aux= 14:39:15 Message to Camera, serial 54548 queued 14:39:52 Received message from Master: op=PointingHead serial=54561 14:39:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:39:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:39:52 Point started: ret=0 14:39:52 point_skyscan result=0 14:39:53 Check angles 14:39:53 SkyScan query 14:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 14:39:53 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 14:39:54 Check angles 14:39:54 SkyScan query 14:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 14:39:54 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 14:39:54 Check angles 14:39:54 SkyScan query 14:39:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.235<-16349 Statuses=0008 0009 14:39:55 Msec=1500 True Az=112.995 Ze=-65.235 Az status=0008 Ze status=0009 14:39:55 Check angles 14:39:55 SkyScan query 14:39:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 14:39:56 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 14:39:56 Check angles 14:39:56 SkyScan query 14:39:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.145<-19143 Statuses=0008 0009 14:39:56 Msec=3000 True Az=112.995 Ze=-107.145 Az status=0008 Ze status=0009 14:39:57 Check angles 14:39:57 SkyScan query 14:39:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.115<-20541 Statuses=0008 0009 14:39:57 Msec=3750 True Az=112.995 Ze=-128.115 Az status=0008 Ze status=0009 14:39:57 Check angles 14:39:57 SkyScan query 14:39:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.07<-21938 Statuses=0008 0009 14:39:58 Msec=4500 True Az=112.995 Ze=-149.07 Az status=0008 Ze status=0009 14:39:58 Check angles 14:39:58 SkyScan query 14:39:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.98<-23332 Statuses=0008 0009 14:39:59 Msec=5250 True Az=112.995 Ze=-169.98 Az status=0008 Ze status=0009 14:39:59 Check angles 14:39:59 SkyScan query 14:39:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:39:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:39:59 Message to Master queued w/err=0: serial=54561 error=0 14:40:04 Received message from Master: op=Filter serial=54562 14:40:04 Color wheel filter change from 0 to 0 14:40:04 FLIGetFilterPos err=0 currentPosition=0 14:40:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:04 Filter is already there-color wheel unchanged 14:40:05 Received message from Master: op=Shutter serial=54563 14:40:05 Shutter LASER open 14:40:05 Received message from Camera: op=State serial=54565 14:40:05 GetSingleValue result=40 Value=cccccccc 14:40:05 SkyScan query 14:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:40:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:05 Parameters OK 14:40:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:05 Set A/D data flow result=40 14:40:05 Set A/D channel type result=40 14:40:05 Set A/D encoding result=40 14:40:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:05 Set channel filter=0.000000e+000 result=40 14:40:05 Config A/D Result=40 14:40:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:05 Get A/D filter: -9.255963e+061 result=40 14:40:05 Get A/D value=-858993460 result=40 14:40:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:05 Parameters OK 14:40:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:05 Set A/D data flow result=40 14:40:05 Set A/D channel type result=40 14:40:05 Set A/D encoding result=40 14:40:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:05 Set channel filter=0.000000e+000 result=40 14:40:05 Config A/D Result=40 14:40:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:05 Get A/D filter: -9.255963e+061 result=40 14:40:05 Get A/D value=-858993460 result=40 14:40:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:05 Aux= 14:40:05 Message to Camera, serial 54565 queued 14:40:14 Received message from Master: op=Shutter serial=54575 14:40:14 Shutter LASER close 14:40:14 Received message from Master: op=PointingHead serial=54579 14:40:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:40:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:40:15 Point started: ret=0 14:40:15 point_skyscan result=0 14:40:16 Check angles 14:40:16 SkyScan query 14:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 14:40:16 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 14:40:16 Check angles 14:40:16 SkyScan query 14:40:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 14:40:17 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 14:40:17 Check angles 14:40:17 SkyScan query 14:40:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.455<-18697 Statuses=0008 0009 14:40:18 Msec=1500 True Az=112.995 Ze=-100.455 Az status=0008 Ze status=0009 14:40:18 Check angles 14:40:18 SkyScan query 14:40:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.485<-17299 Statuses=0008 0009 14:40:18 Msec=2250 True Az=112.995 Ze=-79.485 Az status=0008 Ze status=0009 14:40:19 Check angles 14:40:19 SkyScan query 14:40:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.5<-15900 Statuses=0008 0009 14:40:19 Msec=3000 True Az=112.995 Ze=-58.5 Az status=0008 Ze status=0009 14:40:19 Check angles 14:40:19 SkyScan query 14:40:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.14<-14476 Statuses=0008 0009 14:40:20 Msec=3750 True Az=112.995 Ze=-37.14 Az status=0008 Ze status=0009 14:40:20 Check angles 14:40:20 SkyScan query 14:40:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.17<-13078 Statuses=0008 0009 14:40:21 Msec=4500 True Az=112.995 Ze=-16.17 Az status=0008 Ze status=0009 14:40:21 Check angles 14:40:21 SkyScan query 14:40:21 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 14:40:21 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 14:40:22 Check angles 14:40:22 SkyScan query 14:40:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:40:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:40:22 Message to Master queued w/err=0: serial=54579 error=0 14:40:27 Received message from Master: op=Filter serial=54580 14:40:27 Color wheel filter change from 0 to 0 14:40:27 FLIGetFilterPos err=0 currentPosition=0 14:40:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:27 Filter is already there-color wheel unchanged 14:40:27 Received message from Master: op=Shutter serial=54581 14:40:27 Shutter LASER close 14:40:27 Received message from Camera: op=State serial=54583 14:40:27 GetSingleValue result=40 Value=cccccccc 14:40:27 SkyScan query 14:40:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:40:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:28 Parameters OK 14:40:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:28 Set A/D data flow result=40 14:40:28 Set A/D channel type result=40 14:40:28 Set A/D encoding result=40 14:40:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:28 Set channel filter=0.000000e+000 result=40 14:40:28 Config A/D Result=40 14:40:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:28 Get A/D filter: -9.255963e+061 result=40 14:40:28 Get A/D value=-858993460 result=40 14:40:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:28 Parameters OK 14:40:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:28 Set A/D data flow result=40 14:40:28 Set A/D channel type result=40 14:40:28 Set A/D encoding result=40 14:40:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:28 Set channel filter=0.000000e+000 result=40 14:40:28 Config A/D Result=40 14:40:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:28 Get A/D filter: -9.255963e+061 result=40 14:40:28 Get A/D value=-858993460 result=40 14:40:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:28 Aux= 14:40:28 Message to Camera, serial 54583 queued 14:41:05 Received message from Master: op=PointingHead serial=54596 14:41:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:41:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:41:05 Point started: ret=0 14:41:05 point_skyscan result=0 14:41:06 Check angles 14:41:06 SkyScan query 14:41:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:41:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:41:07 Message to Master queued w/err=0: serial=54596 error=0 14:41:12 Received message from Master: op=Filter serial=54597 14:41:12 Color wheel filter change from 0 to 0 14:41:12 FLIGetFilterPos err=0 currentPosition=0 14:41:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:12 Filter is already there-color wheel unchanged 14:41:12 Received message from Master: op=Shutter serial=54598 14:41:12 Shutter LASER close 14:41:12 Received message from Camera: op=State serial=54600 14:41:12 GetSingleValue result=40 Value=cccccccc 14:41:12 SkyScan query 14:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:41:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:12 Parameters OK 14:41:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:12 Set A/D data flow result=40 14:41:12 Set A/D channel type result=40 14:41:12 Set A/D encoding result=40 14:41:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:12 Set channel filter=0.000000e+000 result=40 14:41:12 Config A/D Result=40 14:41:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:12 Get A/D filter: -9.255963e+061 result=40 14:41:12 Get A/D value=-858993460 result=40 14:41:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:12 Parameters OK 14:41:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:12 Set A/D data flow result=40 14:41:12 Set A/D channel type result=40 14:41:12 Set A/D encoding result=40 14:41:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:12 Set channel filter=0.000000e+000 result=40 14:41:12 Config A/D Result=40 14:41:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:12 Get A/D filter: -9.255963e+061 result=40 14:41:12 Get A/D value=-858993460 result=40 14:41:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:12 Aux= 14:41:12 Message to Camera, serial 54600 queued 14:41:49 Received message from Master: op=PointingHead serial=54613 14:41:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:41:49 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:41:50 Point started: ret=0 14:41:50 point_skyscan result=0 14:41:50 Check angles 14:41:50 SkyScan query 14:41:51 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 14:41:51 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 14:41:51 Check angles 14:41:51 SkyScan query 14:41:52 SkyScan query done: ret=0 az=153.3<-10220 ze=-6.495<-12433 Statuses=0009 0008 14:41:52 Msec=750 True Az=153.3 Ze=-6.495 Az status=0009 Ze status=0008 14:41:52 Check angles 14:41:52 SkyScan query 14:41:52 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 14:41:52 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 14:41:53 Check angles 14:41:53 SkyScan query 14:41:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:41:53 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:41:53 Message to Master queued w/err=0: serial=54613 error=0 14:41:58 Received message from Master: op=Filter serial=54614 14:41:58 Color wheel filter change from 0 to 0 14:41:58 FLIGetFilterPos err=0 currentPosition=0 14:41:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:58 Filter is already there-color wheel unchanged 14:41:58 Received message from Master: op=Shutter serial=54615 14:41:58 Shutter LASER close 14:41:58 Received message from Camera: op=State serial=54617 14:41:58 GetSingleValue result=40 Value=cccccccc 14:41:58 SkyScan query 14:41:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:41:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:59 Parameters OK 14:41:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:59 Set A/D data flow result=40 14:41:59 Set A/D channel type result=40 14:41:59 Set A/D encoding result=40 14:41:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:59 Set channel filter=0.000000e+000 result=40 14:41:59 Config A/D Result=40 14:41:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:59 Get A/D filter: -9.255963e+061 result=40 14:41:59 Get A/D value=-858993460 result=40 14:41:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:59 Parameters OK 14:41:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:59 Set A/D data flow result=40 14:41:59 Set A/D channel type result=40 14:41:59 Set A/D encoding result=40 14:41:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:59 Set channel filter=0.000000e+000 result=40 14:41:59 Config A/D Result=40 14:41:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:59 Get A/D filter: -9.255963e+061 result=40 14:41:59 Get A/D value=-858993460 result=40 14:41:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:59 Aux= 14:41:59 Message to Camera, serial 54617 queued 14:42:36 Received message from Master: op=PointingHead serial=54630 14:42:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:42:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:42:36 Point started: ret=0 14:42:36 point_skyscan result=0 14:42:37 Check angles 14:42:37 SkyScan query 14:42:37 SkyScan query done: ret=0 az=152.655<-10177 ze=6.51<-11566 Statuses=0009 0008 14:42:37 Msec=0 True Az=152.655 Ze=6.51 Az status=0009 Ze status=0008 14:42:38 Check angles 14:42:38 SkyScan query 14:42:38 SkyScan query done: ret=0 az=134.955<-8997 ze=6.495<-11567 Statuses=0009 0008 14:42:38 Msec=750 True Az=134.955 Ze=6.495 Az status=0009 Ze status=0008 14:42:38 Check angles 14:42:38 SkyScan query 14:42:39 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 14:42:39 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 14:42:39 Check angles 14:42:39 SkyScan query 14:42:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:42:40 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:42:40 Message to Master queued w/err=0: serial=54630 error=0 14:42:45 Received message from Master: op=Filter serial=54631 14:42:45 Color wheel filter change from 0 to 0 14:42:45 FLIGetFilterPos err=0 currentPosition=0 14:42:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:45 Filter is already there-color wheel unchanged 14:42:45 Received message from Master: op=Shutter serial=54632 14:42:45 Shutter LASER close 14:42:45 Received message from Camera: op=State serial=54634 14:42:45 GetSingleValue result=40 Value=cccccccc 14:42:45 SkyScan query 14:42:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:42:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:46 Parameters OK 14:42:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:46 Set A/D data flow result=40 14:42:46 Set A/D channel type result=40 14:42:46 Set A/D encoding result=40 14:42:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:46 Set channel filter=0.000000e+000 result=40 14:42:46 Config A/D Result=40 14:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:46 Get A/D filter: -9.255963e+061 result=40 14:42:46 Get A/D value=-858993460 result=40 14:42:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:46 Parameters OK 14:42:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:46 Set A/D data flow result=40 14:42:46 Set A/D channel type result=40 14:42:46 Set A/D encoding result=40 14:42:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:46 Set channel filter=0.000000e+000 result=40 14:42:46 Config A/D Result=40 14:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:46 Get A/D filter: -9.255963e+061 result=40 14:42:46 Get A/D value=-858993460 result=40 14:42:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:46 Aux= 14:42:46 Message to Camera, serial 54634 queued 14:43:22 Received message from Master: op=PointingHead serial=54647 14:43:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:43:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:43:23 Point started: ret=0 14:43:23 point_skyscan result=0 14:43:23 Check angles 14:43:23 SkyScan query 14:43:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 14:43:24 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 14:43:24 Check angles 14:43:24 SkyScan query 14:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 14:43:25 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 14:43:25 Check angles 14:43:25 SkyScan query 14:43:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 14:43:26 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 14:43:26 Check angles 14:43:26 SkyScan query 14:43:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 14:43:26 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 14:43:26 Check angles 14:43:26 SkyScan query 14:43:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.31<-19154 Statuses=0008 0009 14:43:27 Msec=3000 True Az=112.995 Ze=-107.31 Az status=0008 Ze status=0009 14:43:27 Check angles 14:43:27 SkyScan query 14:43:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.265<-20551 Statuses=0008 0009 14:43:28 Msec=3750 True Az=112.995 Ze=-128.265 Az status=0008 Ze status=0009 14:43:28 Check angles 14:43:28 SkyScan query 14:43:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 14:43:29 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 14:43:29 Check angles 14:43:29 SkyScan query 14:43:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.58<-23372 Statuses=0008 0009 14:43:29 Msec=5250 True Az=112.995 Ze=-170.58 Az status=0008 Ze status=0009 14:43:29 Check angles 14:43:29 SkyScan query 14:43:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:43:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:43:30 Message to Master queued w/err=0: serial=54647 error=0 14:43:35 Received message from Master: op=Filter serial=54648 14:43:35 Color wheel filter change from 0 to 0 14:43:35 FLIGetFilterPos err=0 currentPosition=0 14:43:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:35 Filter is already there-color wheel unchanged 14:43:35 Received message from Master: op=Shutter serial=54649 14:43:35 Shutter LASER open 14:43:35 Received message from Camera: op=State serial=54651 14:43:35 GetSingleValue result=40 Value=cccccccc 14:43:35 SkyScan query 14:43:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:43:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:36 Parameters OK 14:43:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:36 Set A/D data flow result=40 14:43:36 Set A/D channel type result=40 14:43:36 Set A/D encoding result=40 14:43:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:36 Set channel filter=0.000000e+000 result=40 14:43:36 Config A/D Result=40 14:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:36 Get A/D filter: -9.255963e+061 result=40 14:43:36 Get A/D value=-858993460 result=40 14:43:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:36 Parameters OK 14:43:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:36 Set A/D data flow result=40 14:43:36 Set A/D channel type result=40 14:43:36 Set A/D encoding result=40 14:43:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:36 Set channel filter=0.000000e+000 result=40 14:43:36 Config A/D Result=40 14:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:36 Get A/D filter: -9.255963e+061 result=40 14:43:36 Get A/D value=-858993460 result=40 14:43:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:36 Aux= 14:43:36 Message to Camera, serial 54651 queued 14:43:44 Received message from Master: op=Shutter serial=54661 14:43:44 Shutter LASER close 14:43:45 Received message from Master: op=PointingHead serial=54665 14:43:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:43:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:43:45 Point started: ret=0 14:43:45 point_skyscan result=0 14:43:46 Check angles 14:43:46 SkyScan query 14:43:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 14:43:46 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 14:43:47 Check angles 14:43:47 SkyScan query 14:43:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 14:43:47 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 14:43:47 Check angles 14:43:47 SkyScan query 14:43:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.595<-18773 Statuses=0008 0009 14:43:48 Msec=1500 True Az=112.995 Ze=-101.595 Az status=0008 Ze status=0009 14:43:48 Check angles 14:43:48 SkyScan query 14:43:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.625<-17375 Statuses=0008 0009 14:43:49 Msec=2250 True Az=112.995 Ze=-80.625 Az status=0008 Ze status=0009 14:43:49 Check angles 14:43:49 SkyScan query 14:43:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.685<-15979 Statuses=0008 0009 14:43:49 Msec=3000 True Az=112.995 Ze=-59.685 Az status=0008 Ze status=0009 14:43:50 Check angles 14:43:50 SkyScan query 14:43:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.73<-14582 Statuses=0008 0009 14:43:50 Msec=3750 True Az=112.995 Ze=-38.73 Az status=0008 Ze status=0009 [UTC 2019-3-1 14:43:50] 14:43:50 Check angles 14:43:50 SkyScan query 14:43:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.76<-13184 Statuses=0008 0009 14:43:51 Msec=4500 True Az=112.995 Ze=-17.76 Az status=0008 Ze status=0009 14:43:51 Check angles 14:43:51 SkyScan query 14:43:52 SkyScan query done: ret=0 az=112.995<-7533 ze=3.63<-11758 Statuses=0008 0009 14:43:52 Msec=5250 True Az=112.995 Ze=3.63 Az status=0008 Ze status=0009 14:43:52 Check angles 14:43:52 SkyScan query 14:43:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:43:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:43:52 Message to Master queued w/err=0: serial=54665 error=0 14:43:57 Received message from Master: op=Filter serial=54666 14:43:57 Color wheel filter change from 0 to 0 14:43:57 FLIGetFilterPos err=0 currentPosition=0 14:43:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:57 Filter is already there-color wheel unchanged 14:43:58 Received message from Master: op=Shutter serial=54667 14:43:58 Shutter LASER close 14:43:58 Received message from Camera: op=State serial=54669 14:43:58 GetSingleValue result=40 Value=cccccccc 14:43:58 SkyScan query 14:43:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:43:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:58 Parameters OK 14:43:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:58 Set A/D data flow result=40 14:43:58 Set A/D channel type result=40 14:43:58 Set A/D encoding result=40 14:43:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:58 Set channel filter=0.000000e+000 result=40 14:43:58 Config A/D Result=40 14:43:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:58 Get A/D filter: -9.255963e+061 result=40 14:43:58 Get A/D value=-858993460 result=40 14:43:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:58 Parameters OK 14:43:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:58 Set A/D data flow result=40 14:43:58 Set A/D channel type result=40 14:43:58 Set A/D encoding result=40 14:43:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:58 Set channel filter=0.000000e+000 result=40 14:43:58 Config A/D Result=40 14:43:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:58 Get A/D filter: -9.255963e+061 result=40 14:43:58 Get A/D value=-858993460 result=40 14:43:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:58 Aux= 14:43:58 Message to Camera, serial 54669 queued 14:44:35 Received message from Master: op=PointingHead serial=54682 14:44:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:44:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:44:36 Point started: ret=0 14:44:36 point_skyscan result=0 14:44:36 Check angles 14:44:36 SkyScan query 14:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:44:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:44:37 Message to Master queued w/err=0: serial=54682 error=0 14:44:42 Received message from Master: op=Filter serial=54683 14:44:42 Color wheel filter change from 0 to 0 14:44:42 FLIGetFilterPos err=0 currentPosition=0 14:44:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:42 Filter is already there-color wheel unchanged 14:44:42 Received message from Master: op=Shutter serial=54684 14:44:42 Shutter LASER close 14:44:42 Received message from Camera: op=State serial=54686 14:44:42 GetSingleValue result=40 Value=cccccccc 14:44:42 SkyScan query 14:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:44:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:43 Parameters OK 14:44:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:43 Set A/D data flow result=40 14:44:43 Set A/D channel type result=40 14:44:43 Set A/D encoding result=40 14:44:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:43 Set channel filter=0.000000e+000 result=40 14:44:43 Config A/D Result=40 14:44:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:43 Get A/D filter: -9.255963e+061 result=40 14:44:43 Get A/D value=-858993460 result=40 14:44:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:43 Parameters OK 14:44:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:43 Set A/D data flow result=40 14:44:43 Set A/D channel type result=40 14:44:43 Set A/D encoding result=40 14:44:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:43 Set channel filter=0.000000e+000 result=40 14:44:43 Config A/D Result=40 14:44:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:43 Get A/D filter: -9.255963e+061 result=40 14:44:43 Get A/D value=-858993460 result=40 14:44:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:43 Aux= 14:44:43 Message to Camera, serial 54686 queued 14:45:20 Received message from Master: op=PointingHead serial=54699 14:45:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:45:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:45:20 Point started: ret=0 14:45:20 point_skyscan result=0 14:45:21 Check angles 14:45:21 SkyScan query 14:45:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:45:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:45:21 Message to Master queued w/err=0: serial=54699 error=0 14:45:26 Received message from Master: op=Filter serial=54700 14:45:26 Color wheel filter change from 0 to 0 14:45:26 FLIGetFilterPos err=0 currentPosition=0 14:45:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:26 Filter is already there-color wheel unchanged 14:45:26 Received message from Master: op=Shutter serial=54701 14:45:26 Shutter LASER close 14:45:26 Received message from Camera: op=State serial=54703 14:45:26 GetSingleValue result=40 Value=cccccccc 14:45:26 SkyScan query 14:45:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:45:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:27 Parameters OK 14:45:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:27 Set A/D data flow result=40 14:45:27 Set A/D channel type result=40 14:45:27 Set A/D encoding result=40 14:45:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:27 Set channel filter=0.000000e+000 result=40 14:45:27 Config A/D Result=40 14:45:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:27 Get A/D filter: -9.255963e+061 result=40 14:45:27 Get A/D value=-858993460 result=40 14:45:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:27 Parameters OK 14:45:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:27 Set A/D data flow result=40 14:45:27 Set A/D channel type result=40 14:45:27 Set A/D encoding result=40 14:45:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:27 Set channel filter=0.000000e+000 result=40 14:45:27 Config A/D Result=40 14:45:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:27 Get A/D filter: -9.255963e+061 result=40 14:45:27 Get A/D value=-858993460 result=40 14:45:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:27 Aux= 14:45:27 Message to Camera, serial 54703 queued 14:46:04 Received message from Master: op=PointingHead serial=54716 14:46:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:46:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:46:04 Point started: ret=0 14:46:04 point_skyscan result=0 14:46:05 Check angles 14:46:05 SkyScan query 14:46:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:46:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:46:06 Message to Master queued w/err=0: serial=54716 error=0 14:46:11 Received message from Master: op=Filter serial=54717 14:46:11 Color wheel filter change from 0 to 0 14:46:11 FLIGetFilterPos err=0 currentPosition=0 14:46:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:11 Filter is already there-color wheel unchanged 14:46:11 Received message from Master: op=Shutter serial=54718 14:46:11 Shutter LASER close 14:46:11 Received message from Camera: op=State serial=54720 14:46:11 GetSingleValue result=40 Value=cccccccc 14:46:11 SkyScan query 14:46:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:46:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:11 Parameters OK 14:46:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:11 Set A/D data flow result=40 14:46:11 Set A/D channel type result=40 14:46:11 Set A/D encoding result=40 14:46:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:11 Set channel filter=0.000000e+000 result=40 14:46:11 Config A/D Result=40 14:46:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:11 Get A/D filter: -9.255963e+061 result=40 14:46:11 Get A/D value=-858993460 result=40 14:46:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:11 Parameters OK 14:46:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:11 Set A/D data flow result=40 14:46:11 Set A/D channel type result=40 14:46:11 Set A/D encoding result=40 14:46:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:11 Set channel filter=0.000000e+000 result=40 14:46:11 Config A/D Result=40 14:46:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:11 Get A/D filter: -9.255963e+061 result=40 14:46:11 Get A/D value=-858993460 result=40 14:46:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:11 Aux= 14:46:11 Message to Camera, serial 54720 queued 14:46:48 Received message from Master: op=PointingHead serial=54733 14:46:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:46:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:46:49 Point started: ret=0 14:46:49 point_skyscan result=0 14:46:49 Check angles 14:46:49 SkyScan query 14:46:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 14:46:50 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 14:46:50 Check angles 14:46:50 SkyScan query 14:46:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 14:46:51 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 14:46:51 Check angles 14:46:51 SkyScan query 14:46:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.165<-16411 Statuses=0008 0009 14:46:51 Msec=1500 True Az=112.995 Ze=-66.165 Az status=0008 Ze status=0009 14:46:52 Check angles 14:46:52 SkyScan query 14:46:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.12<-17808 Statuses=0008 0009 14:46:52 Msec=2250 True Az=112.995 Ze=-87.12 Az status=0008 Ze status=0009 14:46:52 Check angles 14:46:52 SkyScan query 14:46:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.075<-19205 Statuses=0008 0009 14:46:53 Msec=3000 True Az=112.995 Ze=-108.075 Az status=0008 Ze status=0009 14:46:53 Check angles 14:46:53 SkyScan query 14:46:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.015<-20601 Statuses=0008 0009 14:46:54 Msec=3750 True Az=112.995 Ze=-129.015 Az status=0008 Ze status=0009 14:46:54 Check angles 14:46:54 SkyScan query 14:46:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.985<-21999 Statuses=0008 0009 14:46:54 Msec=4500 True Az=112.995 Ze=-149.985 Az status=0008 Ze status=0009 14:46:55 Check angles 14:46:55 SkyScan query 14:46:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.85<-23390 Statuses=0008 0009 14:46:55 Msec=5250 True Az=112.995 Ze=-170.85 Az status=0008 Ze status=0009 14:46:55 Check angles 14:46:55 SkyScan query 14:46:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:46:56 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:46:56 Message to Master queued w/err=0: serial=54733 error=0 14:47:01 Received message from Master: op=Filter serial=54734 14:47:01 Color wheel filter change from 0 to 0 14:47:01 FLIGetFilterPos err=0 currentPosition=0 14:47:01 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:01 Filter is already there-color wheel unchanged 14:47:01 Received message from Master: op=Shutter serial=54735 14:47:01 Shutter LASER open 14:47:01 Received message from Camera: op=State serial=54737 14:47:01 GetSingleValue result=40 Value=cccccccc 14:47:01 SkyScan query 14:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:47:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:02 Parameters OK 14:47:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:02 Set A/D data flow result=40 14:47:02 Set A/D channel type result=40 14:47:02 Set A/D encoding result=40 14:47:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:02 Set channel filter=0.000000e+000 result=40 14:47:02 Config A/D Result=40 14:47:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:02 Get A/D filter: -9.255963e+061 result=40 14:47:02 Get A/D value=-858993460 result=40 14:47:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:02 Parameters OK 14:47:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:02 Set A/D data flow result=40 14:47:02 Set A/D channel type result=40 14:47:02 Set A/D encoding result=40 14:47:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:02 Set channel filter=0.000000e+000 result=40 14:47:02 Config A/D Result=40 14:47:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:02 Get A/D filter: -9.255963e+061 result=40 14:47:02 Get A/D value=-858993460 result=40 14:47:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:02 Aux= 14:47:02 Message to Camera, serial 54737 queued 14:47:10 Received message from Master: op=Shutter serial=54747 14:47:10 Shutter LASER close 14:47:11 Received message from Master: op=PointingHead serial=54751 14:47:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:47:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:47:11 Point started: ret=0 14:47:11 point_skyscan result=0 14:47:12 Check angles 14:47:12 SkyScan query 14:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 14:47:13 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 14:47:13 Check angles 14:47:13 SkyScan query 14:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 14:47:13 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 14:47:14 Check angles 14:47:14 SkyScan query 14:47:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 14:47:14 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 14:47:14 Check angles 14:47:14 SkyScan query 14:47:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 14:47:15 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 14:47:15 Check angles 14:47:15 SkyScan query 14:47:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 14:47:16 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 14:47:16 Check angles 14:47:16 SkyScan query 14:47:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 14:47:16 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 14:47:17 Check angles 14:47:17 SkyScan query 14:47:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.325<-13155 Statuses=0008 0009 14:47:17 Msec=4500 True Az=112.995 Ze=-17.325 Az status=0008 Ze status=0009 14:47:17 Check angles 14:47:17 SkyScan query 14:47:18 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 14:47:18 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 14:47:18 Check angles 14:47:18 SkyScan query 14:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:47:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:47:19 Message to Master queued w/err=0: serial=54751 error=0 14:47:24 Received message from Master: op=Filter serial=54752 14:47:24 Color wheel filter change from 0 to 0 14:47:24 FLIGetFilterPos err=0 currentPosition=0 14:47:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:24 Filter is already there-color wheel unchanged 14:47:24 Received message from Master: op=Shutter serial=54753 14:47:24 Shutter LASER close 14:47:24 Received message from Camera: op=State serial=54755 14:47:24 GetSingleValue result=40 Value=cccccccc 14:47:24 SkyScan query 14:47:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:47:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:25 Parameters OK 14:47:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:25 Set A/D data flow result=40 14:47:25 Set A/D channel type result=40 14:47:25 Set A/D encoding result=40 14:47:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:25 Set channel filter=0.000000e+000 result=40 14:47:25 Config A/D Result=40 14:47:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:25 Get A/D filter: -9.255963e+061 result=40 14:47:25 Get A/D value=-858993460 result=40 14:47:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:25 Parameters OK 14:47:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:25 Set A/D data flow result=40 14:47:25 Set A/D channel type result=40 14:47:25 Set A/D encoding result=40 14:47:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:25 Set channel filter=0.000000e+000 result=40 14:47:25 Config A/D Result=40 14:47:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:25 Get A/D filter: -9.255963e+061 result=40 14:47:25 Get A/D value=-858993460 result=40 14:47:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:25 Aux= 14:47:25 Message to Camera, serial 54755 queued 14:48:01 Received message from Master: op=PointingHead serial=54768 14:48:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:48:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:48:02 Point started: ret=0 14:48:02 point_skyscan result=0 14:48:03 Check angles 14:48:03 SkyScan query 14:48:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:48:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:48:03 Message to Master queued w/err=0: serial=54768 error=0 14:48:08 Received message from Master: op=Filter serial=54769 14:48:08 Color wheel filter change from 0 to 0 14:48:08 FLIGetFilterPos err=0 currentPosition=0 14:48:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:08 Filter is already there-color wheel unchanged 14:48:08 Received message from Master: op=Shutter serial=54770 14:48:08 Shutter LASER close 14:48:08 Received message from Camera: op=State serial=54772 14:48:08 GetSingleValue result=40 Value=cccccccc 14:48:08 SkyScan query 14:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:48:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:09 Parameters OK 14:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:09 Set A/D data flow result=40 14:48:09 Set A/D channel type result=40 14:48:09 Set A/D encoding result=40 14:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:09 Set channel filter=0.000000e+000 result=40 14:48:09 Config A/D Result=40 14:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:09 Get A/D filter: -9.255963e+061 result=40 14:48:09 Get A/D value=-858993460 result=40 14:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:09 Parameters OK 14:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:09 Set A/D data flow result=40 14:48:09 Set A/D channel type result=40 14:48:09 Set A/D encoding result=40 14:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:09 Set channel filter=0.000000e+000 result=40 14:48:09 Config A/D Result=40 14:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:09 Get A/D filter: -9.255963e+061 result=40 14:48:09 Get A/D value=-858993460 result=40 14:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:09 Aux= 14:48:09 Message to Camera, serial 54772 queued 14:48:46 Received message from Master: op=PointingHead serial=54785 14:48:46 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:48:46 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:48:46 Point started: ret=0 14:48:46 point_skyscan result=0 14:48:47 Check angles 14:48:47 SkyScan query 14:48:47 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 14:48:47 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 14:48:48 Check angles 14:48:48 SkyScan query 14:48:48 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.495<-12433 Statuses=0009 0008 14:48:48 Msec=750 True Az=153.735 Ze=-6.495 Az status=0009 Ze status=0008 14:48:48 Check angles 14:48:48 SkyScan query 14:48:49 SkyScan query done: ret=0 az=171.3<-11420 ze=-6.495<-12433 Statuses=0009 0008 14:48:49 Msec=1500 True Az=171.3 Ze=-6.495 Az status=0009 Ze status=0008 14:48:49 Check angles 14:48:49 SkyScan query 14:48:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:48:50 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:48:50 Message to Master queued w/err=0: serial=54785 error=0 14:48:55 Received message from Master: op=Filter serial=54786 14:48:55 Color wheel filter change from 0 to 0 14:48:55 FLIGetFilterPos err=0 currentPosition=0 14:48:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:55 Filter is already there-color wheel unchanged 14:48:55 Received message from Master: op=Shutter serial=54787 14:48:55 Shutter LASER close 14:48:55 Received message from Camera: op=State serial=54789 14:48:55 GetSingleValue result=40 Value=cccccccc 14:48:55 SkyScan query 14:48:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:48:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:55 Parameters OK 14:48:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:55 Set A/D data flow result=40 14:48:55 Set A/D channel type result=40 14:48:55 Set A/D encoding result=40 14:48:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:55 Set channel filter=0.000000e+000 result=40 14:48:55 Config A/D Result=40 14:48:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:55 Get A/D filter: -9.255963e+061 result=40 14:48:55 Get A/D value=-858993460 result=40 14:48:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:55 Parameters OK 14:48:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:55 Set A/D data flow result=40 14:48:55 Set A/D channel type result=40 14:48:55 Set A/D encoding result=40 14:48:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:55 Set channel filter=0.000000e+000 result=40 14:48:55 Config A/D Result=40 14:48:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:55 Get A/D filter: -9.255963e+061 result=40 14:48:55 Get A/D value=-858993460 result=40 14:48:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:55 Aux= 14:48:55 Message to Camera, serial 54789 queued 14:49:32 Received message from Master: op=PointingHead serial=54802 14:49:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:49:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:49:33 Point started: ret=0 14:49:33 point_skyscan result=0 14:49:33 Check angles 14:49:33 SkyScan query 14:49:34 SkyScan query done: ret=0 az=152.82<-10188 ze=6.51<-11566 Statuses=0009 0008 14:49:34 Msec=0 True Az=152.82 Ze=6.51 Az status=0009 Ze status=0008 14:49:34 Check angles 14:49:34 SkyScan query 14:49:35 SkyScan query done: ret=0 az=135.225<-9015 ze=6.495<-11567 Statuses=0009 0008 14:49:35 Msec=750 True Az=135.225 Ze=6.495 Az status=0009 Ze status=0008 14:49:35 Check angles 14:49:35 SkyScan query 14:49:35 SkyScan query done: ret=0 az=117.9<-7860 ze=6.495<-11567 Statuses=0009 0008 14:49:35 Msec=1500 True Az=117.9 Ze=6.495 Az status=0009 Ze status=0008 14:49:36 Check angles 14:49:36 SkyScan query 14:49:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:49:36 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:49:36 Message to Master queued w/err=0: serial=54802 error=0 14:49:41 Received message from Master: op=Filter serial=54803 14:49:41 Color wheel filter change from 0 to 0 14:49:41 FLIGetFilterPos err=0 currentPosition=0 14:49:41 FLIGetStepsRemaining err=0 RemainingSteps=0 14:49:41 Filter is already there-color wheel unchanged 14:49:41 Received message from Master: op=Shutter serial=54804 14:49:41 Shutter LASER close 14:49:41 Received message from Camera: op=State serial=54806 14:49:41 GetSingleValue result=40 Value=cccccccc 14:49:41 SkyScan query 14:49:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:49:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:42 Parameters OK 14:49:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:42 Set A/D data flow result=40 14:49:42 Set A/D channel type result=40 14:49:42 Set A/D encoding result=40 14:49:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:42 Set channel filter=0.000000e+000 result=40 14:49:42 Config A/D Result=40 14:49:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:42 Get A/D filter: -9.255963e+061 result=40 14:49:42 Get A/D value=-858993460 result=40 14:49:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:42 Parameters OK 14:49:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:42 Set A/D data flow result=40 14:49:42 Set A/D channel type result=40 14:49:42 Set A/D encoding result=40 14:49:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:42 Set channel filter=0.000000e+000 result=40 14:49:42 Config A/D Result=40 14:49:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:42 Get A/D filter: -9.255963e+061 result=40 14:49:42 Get A/D value=-858993460 result=40 14:49:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:49:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:49:42 Aux= 14:49:42 Message to Camera, serial 54806 queued 14:50:19 Received message from Master: op=PointingHead serial=54819 14:50:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:50:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:50:19 Point started: ret=0 14:50:19 point_skyscan result=0 14:50:20 Check angles 14:50:20 SkyScan query 14:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 14:50:20 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 14:50:21 Check angles 14:50:21 SkyScan query 14:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 14:50:21 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 14:50:21 Check angles 14:50:21 SkyScan query 14:50:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 14:50:22 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 14:50:22 Check angles 14:50:22 SkyScan query 14:50:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.985<-17799 Statuses=0008 0009 14:50:23 Msec=2250 True Az=112.995 Ze=-86.985 Az status=0008 Ze status=0009 14:50:23 Check angles 14:50:23 SkyScan query 14:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.375<-19225 Statuses=0008 0009 14:50:24 Msec=3000 True Az=112.995 Ze=-108.375 Az status=0008 Ze status=0009 14:50:24 Check angles 14:50:24 SkyScan query 14:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.33<-20622 Statuses=0008 0009 14:50:24 Msec=3750 True Az=112.995 Ze=-129.33 Az status=0008 Ze status=0009 14:50:24 Check angles 14:50:24 SkyScan query 14:50:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.72<-22048 Statuses=0008 0009 14:50:25 Msec=4500 True Az=112.995 Ze=-150.72 Az status=0008 Ze status=0009 14:50:25 Check angles 14:50:25 SkyScan query 14:50:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.72<-23448 Statuses=0008 0009 14:50:26 Msec=5250 True Az=112.995 Ze=-171.72 Az status=0008 Ze status=0009 14:50:26 Check angles 14:50:26 SkyScan query 14:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:50:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:50:27 Message to Master queued w/err=0: serial=54819 error=0 14:50:32 Received message from Master: op=Filter serial=54820 14:50:32 Color wheel filter change from 0 to 0 14:50:32 FLIGetFilterPos err=0 currentPosition=0 14:50:32 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:32 Filter is already there-color wheel unchanged 14:50:32 Received message from Master: op=Shutter serial=54821 14:50:32 Shutter LASER open 14:50:32 Received message from Camera: op=State serial=54823 14:50:32 GetSingleValue result=40 Value=cccccccc 14:50:32 SkyScan query 14:50:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:50:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:32 Parameters OK 14:50:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:32 Set A/D data flow result=40 14:50:32 Set A/D channel type result=40 14:50:32 Set A/D encoding result=40 14:50:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:32 Set channel filter=0.000000e+000 result=40 14:50:32 Config A/D Result=40 14:50:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:32 Get A/D filter: -9.255963e+061 result=40 14:50:32 Get A/D value=-858993460 result=40 14:50:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:32 Parameters OK 14:50:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:32 Set A/D data flow result=40 14:50:32 Set A/D channel type result=40 14:50:32 Set A/D encoding result=40 14:50:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:32 Set channel filter=0.000000e+000 result=40 14:50:32 Config A/D Result=40 14:50:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:32 Get A/D filter: -9.255963e+061 result=40 14:50:32 Get A/D value=-858993460 result=40 14:50:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:32 Aux= 14:50:32 Message to Camera, serial 54823 queued 14:50:41 Received message from Master: op=Shutter serial=54833 14:50:41 Shutter LASER close 14:50:41 Received message from Master: op=PointingHead serial=54837 14:50:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:50:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:50:42 Point started: ret=0 14:50:42 point_skyscan result=0 14:50:42 Check angles 14:50:42 SkyScan query 14:50:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 14:50:43 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 14:50:43 Check angles 14:50:43 SkyScan query 14:50:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 14:50:44 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 14:50:44 Check angles 14:50:44 SkyScan query 14:50:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 14:50:45 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 14:50:45 Check angles 14:50:45 SkyScan query 14:50:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.115<-17341 Statuses=0008 0009 14:50:45 Msec=2250 True Az=112.995 Ze=-80.115 Az status=0008 Ze status=0009 14:50:45 Check angles 14:50:45 SkyScan query 14:50:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.71<-15914 Statuses=0008 0009 14:50:46 Msec=3000 True Az=112.995 Ze=-58.71 Az status=0008 Ze status=0009 14:50:46 Check angles 14:50:46 SkyScan query 14:50:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 14:50:47 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 14:50:47 Check angles 14:50:47 SkyScan query 14:50:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 14:50:48 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 14:50:48 Check angles 14:50:48 SkyScan query 14:50:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.5<-11700 Statuses=0008 0009 14:50:48 Msec=5250 True Az=112.995 Ze=4.5 Az status=0008 Ze status=0009 14:50:48 Check angles 14:50:48 SkyScan query 14:50:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:50:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:50:49 Message to Master queued w/err=0: serial=54837 error=0 14:50:54 Received message from Master: op=Filter serial=54838 14:50:54 Color wheel filter change from 0 to 0 14:50:54 FLIGetFilterPos err=0 currentPosition=0 14:50:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:54 Filter is already there-color wheel unchanged 14:50:54 Received message from Master: op=Shutter serial=54839 14:50:54 Shutter LASER close 14:50:54 Received message from Camera: op=State serial=54841 14:50:54 GetSingleValue result=40 Value=cccccccc 14:50:54 SkyScan query 14:50:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:50:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:55 Parameters OK 14:50:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:55 Set A/D data flow result=40 14:50:55 Set A/D channel type result=40 14:50:55 Set A/D encoding result=40 14:50:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:55 Set channel filter=0.000000e+000 result=40 14:50:55 Config A/D Result=40 14:50:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:55 Get A/D filter: -9.255963e+061 result=40 14:50:55 Get A/D value=-858993460 result=40 14:50:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:55 Parameters OK 14:50:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:55 Set A/D data flow result=40 14:50:55 Set A/D channel type result=40 14:50:55 Set A/D encoding result=40 14:50:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:55 Set channel filter=0.000000e+000 result=40 14:50:55 Config A/D Result=40 14:50:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:55 Get A/D filter: -9.255963e+061 result=40 14:50:55 Get A/D value=-858993460 result=40 14:50:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:55 Aux= 14:50:55 Message to Camera, serial 54841 queued 14:51:32 Received message from Master: op=PointingHead serial=54854 14:51:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:51:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:51:32 Point started: ret=0 14:51:32 point_skyscan result=0 14:51:33 Check angles 14:51:33 SkyScan query 14:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:51:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:51:33 Message to Master queued w/err=0: serial=54854 error=0 14:51:38 Received message from Master: op=Filter serial=54855 14:51:38 Color wheel filter change from 0 to 0 14:51:38 FLIGetFilterPos err=0 currentPosition=0 14:51:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:38 Filter is already there-color wheel unchanged 14:51:39 Received message from Master: op=Shutter serial=54856 14:51:39 Shutter LASER close 14:51:39 Received message from Camera: op=State serial=54858 14:51:39 GetSingleValue result=40 Value=cccccccc 14:51:39 SkyScan query 14:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:51:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:39 Parameters OK 14:51:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:39 Set A/D data flow result=40 14:51:39 Set A/D channel type result=40 14:51:39 Set A/D encoding result=40 14:51:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:39 Set channel filter=0.000000e+000 result=40 14:51:39 Config A/D Result=40 14:51:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:39 Get A/D filter: -9.255963e+061 result=40 14:51:39 Get A/D value=-858993460 result=40 14:51:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:39 Parameters OK 14:51:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:39 Set A/D data flow result=40 14:51:39 Set A/D channel type result=40 14:51:39 Set A/D encoding result=40 14:51:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:39 Set channel filter=0.000000e+000 result=40 14:51:39 Config A/D Result=40 14:51:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:39 Get A/D filter: -9.255963e+061 result=40 14:51:39 Get A/D value=-858993460 result=40 14:51:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:51:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:51:39 Aux= 14:51:39 Message to Camera, serial 54858 queued 14:52:16 Received message from Master: op=PointingHead serial=54871 14:52:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:52:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:52:17 Point started: ret=0 14:52:17 point_skyscan result=0 14:52:17 Check angles 14:52:17 SkyScan query 14:52:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:52:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:52:18 Message to Master queued w/err=0: serial=54871 error=0 14:52:23 Received message from Master: op=Filter serial=54872 14:52:23 Color wheel filter change from 0 to 0 14:52:23 FLIGetFilterPos err=0 currentPosition=0 14:52:23 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:23 Filter is already there-color wheel unchanged 14:52:23 Received message from Master: op=Shutter serial=54873 14:52:23 Shutter LASER close 14:52:23 Received message from Camera: op=State serial=54875 14:52:23 GetSingleValue result=40 Value=cccccccc 14:52:23 SkyScan query 14:52:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:52:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:24 Parameters OK 14:52:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:24 Set A/D data flow result=40 14:52:24 Set A/D channel type result=40 14:52:24 Set A/D encoding result=40 14:52:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:24 Set channel filter=0.000000e+000 result=40 14:52:24 Config A/D Result=40 14:52:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:24 Get A/D filter: -9.255963e+061 result=40 14:52:24 Get A/D value=-858993460 result=40 14:52:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:24 Parameters OK 14:52:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:24 Set A/D data flow result=40 14:52:24 Set A/D channel type result=40 14:52:24 Set A/D encoding result=40 14:52:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:24 Set channel filter=0.000000e+000 result=40 14:52:24 Config A/D Result=40 14:52:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:24 Get A/D filter: -9.255963e+061 result=40 14:52:24 Get A/D value=-858993460 result=40 14:52:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:24 Aux= 14:52:24 Message to Camera, serial 54875 queued 14:53:00 Received message from Master: op=PointingHead serial=54888 14:53:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:53:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:53:01 Point started: ret=0 14:53:01 point_skyscan result=0 14:53:02 Check angles 14:53:02 SkyScan query 14:53:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:53:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:53:02 Message to Master queued w/err=0: serial=54888 error=0 14:53:07 Received message from Master: op=Filter serial=54889 14:53:07 Color wheel filter change from 0 to 0 14:53:07 FLIGetFilterPos err=0 currentPosition=0 14:53:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:07 Filter is already there-color wheel unchanged 14:53:07 Received message from Master: op=Shutter serial=54890 14:53:07 Shutter LASER close 14:53:07 Received message from Camera: op=State serial=54892 14:53:07 GetSingleValue result=40 Value=cccccccc 14:53:07 SkyScan query 14:53:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:53:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:08 Parameters OK 14:53:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:08 Set A/D data flow result=40 14:53:08 Set A/D channel type result=40 14:53:08 Set A/D encoding result=40 14:53:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:08 Set channel filter=0.000000e+000 result=40 14:53:08 Config A/D Result=40 14:53:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:08 Get A/D filter: -9.255963e+061 result=40 14:53:08 Get A/D value=-858993460 result=40 14:53:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:08 Parameters OK 14:53:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:08 Set A/D data flow result=40 14:53:08 Set A/D channel type result=40 14:53:08 Set A/D encoding result=40 14:53:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:08 Set channel filter=0.000000e+000 result=40 14:53:08 Config A/D Result=40 14:53:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:08 Get A/D filter: -9.255963e+061 result=40 14:53:08 Get A/D value=-858993460 result=40 14:53:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:08 Aux= 14:53:08 Message to Camera, serial 54892 queued 14:53:45 Received message from Master: op=PointingHead serial=54905 14:53:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:53:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:53:45 Point started: ret=0 14:53:45 point_skyscan result=0 14:53:46 Check angles 14:53:46 SkyScan query 14:53:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.835<-13589 Statuses=0008 0009 14:53:46 Msec=0 True Az=112.995 Ze=-23.835 Az status=0008 Ze status=0009 14:53:47 Check angles 14:53:47 SkyScan query 14:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.82<-14988 Statuses=0008 0009 14:53:47 Msec=750 True Az=112.995 Ze=-44.82 Az status=0008 Ze status=0009 14:53:47 Check angles 14:53:47 SkyScan query 14:53:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 14:53:48 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 14:53:48 Check angles 14:53:48 SkyScan query 14:53:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 14:53:49 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 14:53:49 Check angles 14:53:49 SkyScan query 14:53:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 14:53:49 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 14:53:50 Check angles 14:53:50 SkyScan query 14:53:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 14:53:50 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 14:53:50 Check angles 14:53:50 SkyScan query 14:53:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.55<-21970 Statuses=0008 0009 14:53:51 Msec=4500 True Az=112.995 Ze=-149.55 Az status=0008 Ze status=0009 14:53:51 Check angles 14:53:51 SkyScan query 14:53:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.49<-23366 Statuses=0008 0009 14:53:52 Msec=5250 True Az=112.995 Ze=-170.49 Az status=0008 Ze status=0009 14:53:52 Check angles 14:53:52 SkyScan query 14:53:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:53:52 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:53:52 Message to Master queued w/err=0: serial=54905 error=0 14:53:57 Received message from Master: op=Filter serial=54906 14:53:57 Color wheel filter change from 0 to 0 14:53:57 FLIGetFilterPos err=0 currentPosition=0 14:53:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:57 Filter is already there-color wheel unchanged 14:53:58 Received message from Master: op=Shutter serial=54907 14:53:58 Shutter LASER open 14:53:58 Received message from Camera: op=State serial=54909 14:53:58 GetSingleValue result=40 Value=cccccccc 14:53:58 SkyScan query 14:53:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:53:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:58 Parameters OK 14:53:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:58 Set A/D data flow result=40 14:53:58 Set A/D channel type result=40 14:53:58 Set A/D encoding result=40 14:53:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:58 Set channel filter=0.000000e+000 result=40 14:53:58 Config A/D Result=40 14:53:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:58 Get A/D filter: -9.255963e+061 result=40 14:53:58 Get A/D value=-858993460 result=40 14:53:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:58 Parameters OK 14:53:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:58 Set A/D data flow result=40 14:53:58 Set A/D channel type result=40 14:53:58 Set A/D encoding result=40 14:53:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:58 Set channel filter=0.000000e+000 result=40 14:53:58 Config A/D Result=40 14:53:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:58 Get A/D filter: -9.255963e+061 result=40 14:53:58 Get A/D value=-858993460 result=40 14:53:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:58 Aux= 14:53:58 Message to Camera, serial 54909 queued 14:54:07 Received message from Master: op=Shutter serial=54919 14:54:07 Shutter LASER close 14:54:07 Received message from Master: op=PointingHead serial=54923 14:54:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:54:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:54:08 Point started: ret=0 14:54:08 point_skyscan result=0 14:54:08 Check angles 14:54:08 SkyScan query 14:54:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 14:54:09 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 14:54:09 Check angles 14:54:09 SkyScan query 14:54:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 14:54:10 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 14:54:10 Check angles 14:54:10 SkyScan query 14:54:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.34<-18756 Statuses=0008 0009 14:54:11 Msec=1500 True Az=112.995 Ze=-101.34 Az status=0008 Ze status=0009 14:54:11 Check angles 14:54:11 SkyScan query 14:54:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.37<-17358 Statuses=0008 0009 14:54:11 Msec=2250 True Az=112.995 Ze=-80.37 Az status=0008 Ze status=0009 14:54:11 Check angles 14:54:11 SkyScan query 14:54:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.43<-15962 Statuses=0008 0009 14:54:12 Msec=3000 True Az=112.995 Ze=-59.43 Az status=0008 Ze status=0009 14:54:12 Check angles 14:54:12 SkyScan query 14:54:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.46<-14564 Statuses=0008 0009 14:54:13 Msec=3750 True Az=112.995 Ze=-38.46 Az status=0008 Ze status=0009 14:54:13 Check angles 14:54:13 SkyScan query 14:54:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 14:54:14 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 14:54:14 Check angles 14:54:14 SkyScan query 14:54:14 SkyScan query done: ret=0 az=112.995<-7533 ze=3.885<-11741 Statuses=0008 0009 14:54:14 Msec=5250 True Az=112.995 Ze=3.885 Az status=0008 Ze status=0009 14:54:14 Check angles 14:54:14 SkyScan query 14:54:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:54:15 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 [UTC 2019-3-1 14:54:15] 14:54:15 Message to Master queued w/err=0: serial=54923 error=0 14:54:20 Received message from Master: op=Filter serial=54924 14:54:20 Color wheel filter change from 0 to 0 14:54:20 FLIGetFilterPos err=0 currentPosition=0 14:54:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:54:20 Filter is already there-color wheel unchanged 14:54:20 Received message from Master: op=Shutter serial=54925 14:54:20 Shutter LASER close 14:54:20 Received message from Camera: op=State serial=54927 14:54:20 GetSingleValue result=40 Value=cccccccc 14:54:20 SkyScan query 14:54:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:54:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:21 Parameters OK 14:54:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:21 Set A/D data flow result=40 14:54:21 Set A/D channel type result=40 14:54:21 Set A/D encoding result=40 14:54:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:21 Set channel filter=0.000000e+000 result=40 14:54:21 Config A/D Result=40 14:54:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:21 Get A/D filter: -9.255963e+061 result=40 14:54:21 Get A/D value=-858993460 result=40 14:54:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:21 Parameters OK 14:54:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:21 Set A/D data flow result=40 14:54:21 Set A/D channel type result=40 14:54:21 Set A/D encoding result=40 14:54:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:21 Set channel filter=0.000000e+000 result=40 14:54:21 Config A/D Result=40 14:54:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:21 Get A/D filter: -9.255963e+061 result=40 14:54:21 Get A/D value=-858993460 result=40 14:54:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:21 Aux= 14:54:21 Message to Camera, serial 54927 queued 14:54:58 Received message from Master: op=PointingHead serial=54940 14:54:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:54:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:54:58 Point started: ret=0 14:54:58 point_skyscan result=0 14:54:59 Check angles 14:54:59 SkyScan query 14:54:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:54:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:54:59 Message to Master queued w/err=0: serial=54940 error=0 14:55:04 Received message from Master: op=Filter serial=54941 14:55:04 Color wheel filter change from 0 to 0 14:55:04 FLIGetFilterPos err=0 currentPosition=0 14:55:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:04 Filter is already there-color wheel unchanged 14:55:05 Received message from Master: op=Shutter serial=54942 14:55:05 Shutter LASER close 14:55:05 Received message from Camera: op=State serial=54944 14:55:05 GetSingleValue result=40 Value=cccccccc 14:55:05 SkyScan query 14:55:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:55:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:05 Parameters OK 14:55:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:05 Set A/D data flow result=40 14:55:05 Set A/D channel type result=40 14:55:05 Set A/D encoding result=40 14:55:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:05 Set channel filter=0.000000e+000 result=40 14:55:05 Config A/D Result=40 14:55:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:05 Get A/D filter: -9.255963e+061 result=40 14:55:05 Get A/D value=-858993460 result=40 14:55:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:05 Parameters OK 14:55:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:05 Set A/D data flow result=40 14:55:05 Set A/D channel type result=40 14:55:05 Set A/D encoding result=40 14:55:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:05 Set channel filter=0.000000e+000 result=40 14:55:05 Config A/D Result=40 14:55:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:05 Get A/D filter: -9.255963e+061 result=40 14:55:05 Get A/D value=-858993460 result=40 14:55:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:05 Aux= 14:55:05 Message to Camera, serial 54944 queued 14:55:42 Received message from Master: op=PointingHead serial=54957 14:55:42 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:55:42 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:55:42 Point started: ret=0 14:55:42 point_skyscan result=0 14:55:43 Check angles 14:55:43 SkyScan query 14:55:44 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 14:55:44 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 14:55:44 Check angles 14:55:44 SkyScan query 14:55:44 SkyScan query done: ret=0 az=153.57<-10238 ze=-6.495<-12433 Statuses=0009 0008 14:55:44 Msec=750 True Az=153.57 Ze=-6.495 Az status=0009 Ze status=0008 14:55:45 Check angles 14:55:45 SkyScan query 14:55:45 SkyScan query done: ret=0 az=171.375<-11425 ze=-6.495<-12433 Statuses=0009 0008 14:55:45 Msec=1500 True Az=171.375 Ze=-6.495 Az status=0009 Ze status=0008 14:55:45 Check angles 14:55:45 SkyScan query 14:55:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:55:46 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:55:46 Message to Master queued w/err=0: serial=54957 error=0 14:55:51 Received message from Master: op=Filter serial=54958 14:55:51 Color wheel filter change from 0 to 0 14:55:51 FLIGetFilterPos err=0 currentPosition=0 14:55:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:51 Filter is already there-color wheel unchanged 14:55:51 Received message from Master: op=Shutter serial=54959 14:55:51 Shutter LASER close 14:55:51 Received message from Camera: op=State serial=54961 14:55:51 GetSingleValue result=40 Value=cccccccc 14:55:51 SkyScan query 14:55:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:55:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:52 Parameters OK 14:55:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:52 Set A/D data flow result=40 14:55:52 Set A/D channel type result=40 14:55:52 Set A/D encoding result=40 14:55:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:52 Set channel filter=0.000000e+000 result=40 14:55:52 Config A/D Result=40 14:55:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:52 Get A/D filter: -9.255963e+061 result=40 14:55:52 Get A/D value=-858993460 result=40 14:55:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:52 Parameters OK 14:55:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:52 Set A/D data flow result=40 14:55:52 Set A/D channel type result=40 14:55:52 Set A/D encoding result=40 14:55:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:52 Set channel filter=0.000000e+000 result=40 14:55:52 Config A/D Result=40 14:55:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:52 Get A/D filter: -9.255963e+061 result=40 14:55:52 Get A/D value=-858993460 result=40 14:55:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:52 Aux= 14:55:52 Message to Camera, serial 54961 queued 14:56:29 Received message from Master: op=PointingHead serial=54974 14:56:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:56:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:56:29 Point started: ret=0 14:56:29 point_skyscan result=0 14:56:30 Check angles 14:56:30 SkyScan query 14:56:30 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 14:56:30 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 14:56:30 Check angles 14:56:30 SkyScan query 14:56:31 SkyScan query done: ret=0 az=135.435<-9029 ze=6.495<-11567 Statuses=0009 0008 14:56:31 Msec=750 True Az=135.435 Ze=6.495 Az status=0009 Ze status=0008 14:56:31 Check angles 14:56:31 SkyScan query 14:56:32 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 14:56:32 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 14:56:32 Check angles 14:56:32 SkyScan query 14:56:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:56:33 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:56:33 Message to Master queued w/err=0: serial=54974 error=0 14:56:38 Received message from Master: op=Filter serial=54975 14:56:38 Color wheel filter change from 0 to 0 14:56:38 FLIGetFilterPos err=0 currentPosition=0 14:56:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:38 Filter is already there-color wheel unchanged 14:56:38 Received message from Master: op=Shutter serial=54976 14:56:38 Shutter LASER close 14:56:38 Received message from Camera: op=State serial=54978 14:56:38 GetSingleValue result=40 Value=cccccccc 14:56:38 SkyScan query 14:56:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:56:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:38 Parameters OK 14:56:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:38 Set A/D data flow result=40 14:56:38 Set A/D channel type result=40 14:56:38 Set A/D encoding result=40 14:56:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:38 Set channel filter=0.000000e+000 result=40 14:56:38 Config A/D Result=40 14:56:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:38 Get A/D filter: -9.255963e+061 result=40 14:56:38 Get A/D value=-858993460 result=40 14:56:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:38 Parameters OK 14:56:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:38 Set A/D data flow result=40 14:56:38 Set A/D channel type result=40 14:56:38 Set A/D encoding result=40 14:56:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:38 Set channel filter=0.000000e+000 result=40 14:56:38 Config A/D Result=40 14:56:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:38 Get A/D filter: -9.255963e+061 result=40 14:56:38 Get A/D value=-858993460 result=40 14:56:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:38 Aux= 14:56:38 Message to Camera, serial 54978 queued 14:57:14 Received message from Master: op=PointingHead serial=54990 14:57:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:57:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:57:15 Point started: ret=0 14:57:15 point_skyscan result=0 14:57:15 Check angles 14:57:15 SkyScan query 14:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 14:57:16 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 14:57:16 Check angles 14:57:16 SkyScan query 14:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.115<-14941 Statuses=0008 0009 14:57:17 Msec=750 True Az=112.995 Ze=-44.115 Az status=0008 Ze status=0009 14:57:17 Check angles 14:57:17 SkyScan query 14:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.055<-16337 Statuses=0008 0009 14:57:17 Msec=1500 True Az=112.995 Ze=-65.055 Az status=0008 Ze status=0009 14:57:18 Check angles 14:57:18 SkyScan query 14:57:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.025<-17735 Statuses=0008 0009 14:57:18 Msec=2250 True Az=112.995 Ze=-86.025 Az status=0008 Ze status=0009 14:57:18 Check angles 14:57:18 SkyScan query 14:57:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.965<-19131 Statuses=0008 0009 14:57:19 Msec=3000 True Az=112.995 Ze=-106.965 Az status=0008 Ze status=0009 14:57:19 Check angles 14:57:19 SkyScan query 14:57:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.935<-20529 Statuses=0008 0009 14:57:20 Msec=3750 True Az=112.995 Ze=-127.935 Az status=0008 Ze status=0009 14:57:20 Check angles 14:57:20 SkyScan query 14:57:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.875<-21925 Statuses=0008 0009 14:57:20 Msec=4500 True Az=112.995 Ze=-148.875 Az status=0008 Ze status=0009 14:57:21 Check angles 14:57:21 SkyScan query 14:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.815<-23321 Statuses=0008 0009 14:57:21 Msec=5250 True Az=112.995 Ze=-169.815 Az status=0008 Ze status=0009 14:57:21 Check angles 14:57:21 SkyScan query 14:57:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:57:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:57:22 Message to Master queued w/err=0: serial=54990 error=0 14:57:27 Received message from Master: op=Filter serial=54991 14:57:27 Color wheel filter change from 0 to 0 14:57:27 FLIGetFilterPos err=0 currentPosition=0 14:57:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:27 Filter is already there-color wheel unchanged 14:57:27 Received message from Master: op=Shutter serial=54992 14:57:27 Shutter LASER open 14:57:27 Received message from Camera: op=State serial=54994 14:57:27 GetSingleValue result=40 Value=cccccccc 14:57:27 SkyScan query 14:57:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:57:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:28 Parameters OK 14:57:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:28 Set A/D data flow result=40 14:57:28 Set A/D channel type result=40 14:57:28 Set A/D encoding result=40 14:57:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:28 Set channel filter=0.000000e+000 result=40 14:57:28 Config A/D Result=40 14:57:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:28 Get A/D filter: -9.255963e+061 result=40 14:57:28 Get A/D value=-858993460 result=40 14:57:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:28 Parameters OK 14:57:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:28 Set A/D data flow result=40 14:57:28 Set A/D channel type result=40 14:57:28 Set A/D encoding result=40 14:57:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:28 Set channel filter=0.000000e+000 result=40 14:57:28 Config A/D Result=40 14:57:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:28 Get A/D filter: -9.255963e+061 result=40 14:57:28 Get A/D value=-858993460 result=40 14:57:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:28 Aux= 14:57:28 Message to Camera, serial 54994 queued 14:57:36 Received message from Master: op=Shutter serial=55004 14:57:36 Shutter LASER close 14:57:37 Received message from Master: op=PointingHead serial=55008 14:57:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:57:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:57:37 Point started: ret=0 14:57:37 point_skyscan result=0 14:57:38 Check angles 14:57:38 SkyScan query 14:57:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 14:57:38 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 14:57:39 Check angles 14:57:39 SkyScan query 14:57:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.365<-20091 Statuses=0008 0009 14:57:39 Msec=750 True Az=112.995 Ze=-121.365 Az status=0008 Ze status=0009 14:57:39 Check angles 14:57:39 SkyScan query 14:57:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.41<-18694 Statuses=0008 0009 14:57:40 Msec=1500 True Az=112.995 Ze=-100.41 Az status=0008 Ze status=0009 14:57:40 Check angles 14:57:40 SkyScan query 14:57:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 14:57:41 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 14:57:41 Check angles 14:57:41 SkyScan query 14:57:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.47<-15898 Statuses=0008 0009 14:57:41 Msec=3000 True Az=112.995 Ze=-58.47 Az status=0008 Ze status=0009 14:57:42 Check angles 14:57:42 SkyScan query 14:57:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.095<-14473 Statuses=0008 0009 14:57:42 Msec=3750 True Az=112.995 Ze=-37.095 Az status=0008 Ze status=0009 14:57:42 Check angles 14:57:42 SkyScan query 14:57:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.125<-13075 Statuses=0008 0009 14:57:43 Msec=4500 True Az=112.995 Ze=-16.125 Az status=0008 Ze status=0009 14:57:43 Check angles 14:57:43 SkyScan query 14:57:44 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 14:57:44 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 14:57:44 Check angles 14:57:44 SkyScan query 14:57:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:57:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:57:44 Message to Master queued w/err=0: serial=55008 error=0 14:57:49 Received message from Master: op=Filter serial=55009 14:57:49 Color wheel filter change from 0 to 0 14:57:49 FLIGetFilterPos err=0 currentPosition=0 14:57:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:49 Filter is already there-color wheel unchanged 14:57:50 Received message from Master: op=Shutter serial=55010 14:57:50 Shutter LASER close 14:57:50 Received message from Camera: op=State serial=55012 14:57:50 GetSingleValue result=40 Value=cccccccc 14:57:50 SkyScan query 14:57:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:57:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:50 Parameters OK 14:57:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:50 Set A/D data flow result=40 14:57:50 Set A/D channel type result=40 14:57:50 Set A/D encoding result=40 14:57:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:50 Set channel filter=0.000000e+000 result=40 14:57:50 Config A/D Result=40 14:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:50 Get A/D filter: -9.255963e+061 result=40 14:57:50 Get A/D value=-858993460 result=40 14:57:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:50 Parameters OK 14:57:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:50 Set A/D data flow result=40 14:57:50 Set A/D channel type result=40 14:57:50 Set A/D encoding result=40 14:57:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:50 Set channel filter=0.000000e+000 result=40 14:57:50 Config A/D Result=40 14:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:50 Get A/D filter: -9.255963e+061 result=40 14:57:50 Get A/D value=-858993460 result=40 14:57:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:50 Aux= 14:57:50 Message to Camera, serial 55012 queued 14:58:27 Received message from Master: op=PointingHead serial=55025 14:58:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:58:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:58:28 Point started: ret=0 14:58:28 point_skyscan result=0 14:58:28 Check angles 14:58:28 SkyScan query 14:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:58:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:58:29 Message to Master queued w/err=0: serial=55025 error=0 14:58:34 Received message from Master: op=Filter serial=55026 14:58:34 Color wheel filter change from 0 to 0 14:58:34 FLIGetFilterPos err=0 currentPosition=0 14:58:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:34 Filter is already there-color wheel unchanged 14:58:34 Received message from Master: op=Shutter serial=55027 14:58:34 Shutter LASER close 14:58:34 Received message from Camera: op=State serial=55029 14:58:34 GetSingleValue result=40 Value=cccccccc 14:58:34 SkyScan query 14:58:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:58:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:35 Parameters OK 14:58:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:35 Set A/D data flow result=40 14:58:35 Set A/D channel type result=40 14:58:35 Set A/D encoding result=40 14:58:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:35 Set channel filter=0.000000e+000 result=40 14:58:35 Config A/D Result=40 14:58:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:35 Get A/D filter: -9.255963e+061 result=40 14:58:35 Get A/D value=-858993460 result=40 14:58:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:35 Parameters OK 14:58:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:35 Set A/D data flow result=40 14:58:35 Set A/D channel type result=40 14:58:35 Set A/D encoding result=40 14:58:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:35 Set channel filter=0.000000e+000 result=40 14:58:35 Config A/D Result=40 14:58:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:35 Get A/D filter: -9.255963e+061 result=40 14:58:35 Get A/D value=-858993460 result=40 14:58:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:35 Aux= 14:58:35 Message to Camera, serial 55029 queued 14:59:11 Received message from Master: op=PointingHead serial=55042 14:59:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:59:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:59:12 Point started: ret=0 14:59:12 point_skyscan result=0 14:59:13 Check angles 14:59:13 SkyScan query 14:59:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:59:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:59:13 Message to Master queued w/err=0: serial=55042 error=0 14:59:18 Received message from Master: op=Filter serial=55043 14:59:18 Color wheel filter change from 0 to 0 14:59:18 FLIGetFilterPos err=0 currentPosition=0 14:59:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:18 Filter is already there-color wheel unchanged 14:59:18 Received message from Master: op=Shutter serial=55044 14:59:18 Shutter LASER close 14:59:18 Received message from Camera: op=State serial=55046 14:59:18 GetSingleValue result=40 Value=cccccccc 14:59:18 SkyScan query 14:59:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:59:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:19 Parameters OK 14:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:19 Set A/D data flow result=40 14:59:19 Set A/D channel type result=40 14:59:19 Set A/D encoding result=40 14:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:19 Set channel filter=0.000000e+000 result=40 14:59:19 Config A/D Result=40 14:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:19 Get A/D filter: -9.255963e+061 result=40 14:59:19 Get A/D value=-858993460 result=40 14:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:19 Parameters OK 14:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:19 Set A/D data flow result=40 14:59:19 Set A/D channel type result=40 14:59:19 Set A/D encoding result=40 14:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:19 Set channel filter=0.000000e+000 result=40 14:59:19 Config A/D Result=40 14:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:19 Get A/D filter: -9.255963e+061 result=40 14:59:19 Get A/D value=-858993460 result=40 14:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:19 Aux= 14:59:19 Message to Camera, serial 55046 queued 14:59:56 Received message from Master: op=PointingHead serial=55059 14:59:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:59:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:59:56 Point started: ret=0 14:59:56 point_skyscan result=0 14:59:57 Check angles 14:59:57 SkyScan query 14:59:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:59:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:59:57 Message to Master queued w/err=0: serial=55059 error=0 15:00:02 Received message from Master: op=Filter serial=55060 15:00:02 Color wheel filter change from 0 to 0 15:00:02 FLIGetFilterPos err=0 currentPosition=0 15:00:02 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:02 Filter is already there-color wheel unchanged 15:00:03 Received message from Master: op=Shutter serial=55061 15:00:03 Shutter LASER close 15:00:03 Received message from Camera: op=State serial=55063 15:00:03 GetSingleValue result=40 Value=cccccccc 15:00:03 SkyScan query 15:00:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:00:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:03 Parameters OK 15:00:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:03 Set A/D data flow result=40 15:00:03 Set A/D channel type result=40 15:00:03 Set A/D encoding result=40 15:00:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:03 Set channel filter=0.000000e+000 result=40 15:00:03 Config A/D Result=40 15:00:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:03 Get A/D filter: -9.255963e+061 result=40 15:00:03 Get A/D value=-858993460 result=40 15:00:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:03 Parameters OK 15:00:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:03 Set A/D data flow result=40 15:00:03 Set A/D channel type result=40 15:00:03 Set A/D encoding result=40 15:00:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:03 Set channel filter=0.000000e+000 result=40 15:00:03 Config A/D Result=40 15:00:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:03 Get A/D filter: -9.255963e+061 result=40 15:00:03 Get A/D value=-858993460 result=40 15:00:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:03 Aux= 15:00:03 Message to Camera, serial 55063 queued 15:00:40 Received message from Master: op=PointingHead serial=55076 15:00:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:00:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:00:40 Point started: ret=0 15:00:40 point_skyscan result=0 15:00:41 Check angles 15:00:41 SkyScan query 15:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.55<-13570 Statuses=0008 0009 15:00:42 Msec=0 True Az=112.995 Ze=-23.55 Az status=0008 Ze status=0009 15:00:42 Check angles 15:00:42 SkyScan query 15:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 15:00:42 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 15:00:43 Check angles 15:00:43 SkyScan query 15:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 15:00:43 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 15:00:43 Check angles 15:00:43 SkyScan query 15:00:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.85<-17790 Statuses=0008 0009 15:00:44 Msec=2250 True Az=112.995 Ze=-86.85 Az status=0008 Ze status=0009 15:00:44 Check angles 15:00:44 SkyScan query 15:00:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.225<-19215 Statuses=0008 0009 15:00:45 Msec=3000 True Az=112.995 Ze=-108.225 Az status=0008 Ze status=0009 15:00:45 Check angles 15:00:45 SkyScan query 15:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.195<-20613 Statuses=0008 0009 15:00:46 Msec=3750 True Az=112.995 Ze=-129.195 Az status=0008 Ze status=0009 15:00:46 Check angles 15:00:46 SkyScan query 15:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.57<-22038 Statuses=0008 0009 15:00:46 Msec=4500 True Az=112.995 Ze=-150.57 Az status=0008 Ze status=0009 15:00:46 Check angles 15:00:46 SkyScan query 15:00:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.615<-23441 Statuses=0008 0009 15:00:47 Msec=5250 True Az=112.995 Ze=-171.615 Az status=0008 Ze status=0009 15:00:47 Check angles 15:00:47 SkyScan query 15:00:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:00:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:00:48 Message to Master queued w/err=0: serial=55076 error=0 15:00:53 Received message from Master: op=Filter serial=55077 15:00:53 Color wheel filter change from 0 to 0 15:00:53 FLIGetFilterPos err=0 currentPosition=0 15:00:53 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:53 Filter is already there-color wheel unchanged 15:00:53 Received message from Master: op=Shutter serial=55078 15:00:53 Shutter LASER open 15:00:53 Received message from Camera: op=State serial=55080 15:00:53 GetSingleValue result=40 Value=cccccccc 15:00:53 SkyScan query 15:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:00:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:54 Parameters OK 15:00:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:54 Set A/D data flow result=40 15:00:54 Set A/D channel type result=40 15:00:54 Set A/D encoding result=40 15:00:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:54 Set channel filter=0.000000e+000 result=40 15:00:54 Config A/D Result=40 15:00:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:54 Get A/D filter: -9.255963e+061 result=40 15:00:54 Get A/D value=-858993460 result=40 15:00:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:54 Parameters OK 15:00:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:54 Set A/D data flow result=40 15:00:54 Set A/D channel type result=40 15:00:54 Set A/D encoding result=40 15:00:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:54 Set channel filter=0.000000e+000 result=40 15:00:54 Config A/D Result=40 15:00:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:54 Get A/D filter: -9.255963e+061 result=40 15:00:54 Get A/D value=-858993460 result=40 15:00:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:54 Aux= 15:00:54 Message to Camera, serial 55080 queued 15:01:02 Received message from Master: op=Shutter serial=55090 15:01:02 Shutter LASER close 15:01:03 Received message from Master: op=PointingHead serial=55094 15:01:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:01:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:01:03 Point started: ret=0 15:01:03 point_skyscan result=0 15:01:04 Check angles 15:01:04 SkyScan query 15:01:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 15:01:04 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 15:01:05 Check angles 15:01:05 SkyScan query 15:01:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 15:01:05 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 15:01:05 Check angles 15:01:05 SkyScan query 15:01:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.58<-18772 Statuses=0008 0009 15:01:06 Msec=1500 True Az=112.995 Ze=-101.58 Az status=0008 Ze status=0009 15:01:06 Check angles 15:01:06 SkyScan query 15:01:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 15:01:07 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 15:01:07 Check angles 15:01:07 SkyScan query 15:01:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.28<-15952 Statuses=0008 0009 15:01:07 Msec=3000 True Az=112.995 Ze=-59.28 Az status=0008 Ze status=0009 15:01:08 Check angles 15:01:08 SkyScan query 15:01:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 15:01:08 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 15:01:08 Check angles 15:01:08 SkyScan query 15:01:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 15:01:09 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 15:01:09 Check angles 15:01:09 SkyScan query 15:01:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.41<-11706 Statuses=0008 0009 15:01:10 Msec=5250 True Az=112.995 Ze=4.41 Az status=0008 Ze status=0009 15:01:10 Check angles 15:01:10 SkyScan query 15:01:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:01:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:01:11 Message to Master queued w/err=0: serial=55094 error=0 15:01:16 Received message from Master: op=Filter serial=55095 15:01:16 Color wheel filter change from 0 to 0 15:01:16 FLIGetFilterPos err=0 currentPosition=0 15:01:16 FLIGetStepsRemaining err=0 RemainingSteps=0 15:01:16 Filter is already there-color wheel unchanged 15:01:16 Received message from Master: op=Shutter serial=55096 15:01:16 Shutter LASER close 15:01:16 Received message from Camera: op=State serial=55098 15:01:16 GetSingleValue result=40 Value=cccccccc 15:01:16 SkyScan query 15:01:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:01:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:16 Parameters OK 15:01:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:16 Set A/D data flow result=40 15:01:16 Set A/D channel type result=40 15:01:16 Set A/D encoding result=40 15:01:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:16 Set channel filter=0.000000e+000 result=40 15:01:16 Config A/D Result=40 15:01:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:16 Get A/D filter: -9.255963e+061 result=40 15:01:16 Get A/D value=-858993460 result=40 15:01:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:16 Parameters OK 15:01:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:16 Set A/D data flow result=40 15:01:16 Set A/D channel type result=40 15:01:16 Set A/D encoding result=40 15:01:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:16 Set channel filter=0.000000e+000 result=40 15:01:16 Config A/D Result=40 15:01:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:16 Get A/D filter: -9.255963e+061 result=40 15:01:16 Get A/D value=-858993460 result=40 15:01:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:01:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:01:16 Aux= 15:01:16 Message to Camera, serial 55098 queued 15:01:53 Received message from Master: op=PointingHead serial=55111 15:01:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:01:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:01:54 Point started: ret=0 15:01:54 point_skyscan result=0 15:01:54 Check angles 15:01:54 SkyScan query 15:01:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:01:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:01:55 Message to Master queued w/err=0: serial=55111 error=0 15:02:00 Received message from Master: op=Filter serial=55112 15:02:00 Color wheel filter change from 0 to 0 15:02:00 FLIGetFilterPos err=0 currentPosition=0 15:02:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:00 Filter is already there-color wheel unchanged 15:02:00 Received message from Master: op=Shutter serial=55113 15:02:00 Shutter LASER close 15:02:00 Received message from Camera: op=State serial=55115 15:02:00 GetSingleValue result=40 Value=cccccccc 15:02:00 SkyScan query 15:02:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:02:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:01 Parameters OK 15:02:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:01 Set A/D data flow result=40 15:02:01 Set A/D channel type result=40 15:02:01 Set A/D encoding result=40 15:02:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:01 Set channel filter=0.000000e+000 result=40 15:02:01 Config A/D Result=40 15:02:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:01 Get A/D filter: -9.255963e+061 result=40 15:02:01 Get A/D value=-858993460 result=40 15:02:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:01 Parameters OK 15:02:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:01 Set A/D data flow result=40 15:02:01 Set A/D channel type result=40 15:02:01 Set A/D encoding result=40 15:02:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:01 Set channel filter=0.000000e+000 result=40 15:02:01 Config A/D Result=40 15:02:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:01 Get A/D filter: -9.255963e+061 result=40 15:02:01 Get A/D value=-858993460 result=40 15:02:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:01 Aux= 15:02:01 Message to Camera, serial 55115 queued 15:02:38 Received message from Master: op=PointingHead serial=55128 15:02:38 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:02:38 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:02:38 Point started: ret=0 15:02:38 point_skyscan result=0 15:02:39 Check angles 15:02:39 SkyScan query 15:02:39 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 15:02:39 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 15:02:39 Check angles 15:02:39 SkyScan query 15:02:40 SkyScan query done: ret=0 az=153.3<-10220 ze=-6.495<-12433 Statuses=0009 0008 15:02:40 Msec=750 True Az=153.3 Ze=-6.495 Az status=0009 Ze status=0008 15:02:40 Check angles 15:02:40 SkyScan query 15:02:41 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 15:02:41 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 15:02:41 Check angles 15:02:41 SkyScan query 15:02:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:02:42 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:02:42 Message to Master queued w/err=0: serial=55128 error=0 15:02:47 Received message from Master: op=Filter serial=55129 15:02:47 Color wheel filter change from 0 to 0 15:02:47 FLIGetFilterPos err=0 currentPosition=0 15:02:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:47 Filter is already there-color wheel unchanged 15:02:47 Received message from Master: op=Shutter serial=55130 15:02:47 Shutter LASER close 15:02:47 Received message from Camera: op=State serial=55132 15:02:47 GetSingleValue result=40 Value=cccccccc 15:02:47 SkyScan query 15:02:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:02:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:47 Parameters OK 15:02:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:47 Set A/D data flow result=40 15:02:47 Set A/D channel type result=40 15:02:47 Set A/D encoding result=40 15:02:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:47 Set channel filter=0.000000e+000 result=40 15:02:47 Config A/D Result=40 15:02:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:47 Get A/D filter: -9.255963e+061 result=40 15:02:47 Get A/D value=-858993460 result=40 15:02:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:47 Parameters OK 15:02:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:47 Set A/D data flow result=40 15:02:47 Set A/D channel type result=40 15:02:47 Set A/D encoding result=40 15:02:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:47 Set channel filter=0.000000e+000 result=40 15:02:47 Config A/D Result=40 15:02:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:47 Get A/D filter: -9.255963e+061 result=40 15:02:47 Get A/D value=-858993460 result=40 15:02:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:47 Aux= 15:02:47 Message to Camera, serial 55132 queued 15:03:24 Received message from Master: op=PointingHead serial=55145 15:03:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:03:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:03:25 Point started: ret=0 15:03:25 point_skyscan result=0 15:03:25 Check angles 15:03:25 SkyScan query 15:03:26 SkyScan query done: ret=0 az=152.595<-10173 ze=6.51<-11566 Statuses=0009 0008 15:03:26 Msec=0 True Az=152.595 Ze=6.51 Az status=0009 Ze status=0008 15:03:26 Check angles 15:03:26 SkyScan query 15:03:27 SkyScan query done: ret=0 az=135.18<-9012 ze=6.495<-11567 Statuses=0009 0008 15:03:27 Msec=750 True Az=135.18 Ze=6.495 Az status=0009 Ze status=0008 15:03:27 Check angles 15:03:27 SkyScan query 15:03:27 SkyScan query done: ret=0 az=117.69<-7846 ze=6.495<-11567 Statuses=0009 0008 15:03:27 Msec=1500 True Az=117.69 Ze=6.495 Az status=0009 Ze status=0008 15:03:28 Check angles 15:03:28 SkyScan query 15:03:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:03:28 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:03:28 Message to Master queued w/err=0: serial=55145 error=0 15:03:33 Received message from Master: op=Filter serial=55146 15:03:33 Color wheel filter change from 0 to 0 15:03:33 FLIGetFilterPos err=0 currentPosition=0 15:03:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:33 Filter is already there-color wheel unchanged 15:03:33 Received message from Master: op=Shutter serial=55147 15:03:33 Shutter LASER close 15:03:33 Received message from Camera: op=State serial=55149 15:03:33 GetSingleValue result=40 Value=cccccccc 15:03:33 SkyScan query 15:03:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:03:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:34 Parameters OK 15:03:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:34 Set A/D data flow result=40 15:03:34 Set A/D channel type result=40 15:03:34 Set A/D encoding result=40 15:03:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:34 Set channel filter=0.000000e+000 result=40 15:03:34 Config A/D Result=40 15:03:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:34 Get A/D filter: -9.255963e+061 result=40 15:03:34 Get A/D value=-858993460 result=40 15:03:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:34 Parameters OK 15:03:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:34 Set A/D data flow result=40 15:03:34 Set A/D channel type result=40 15:03:34 Set A/D encoding result=40 15:03:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:34 Set channel filter=0.000000e+000 result=40 15:03:34 Config A/D Result=40 15:03:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:34 Get A/D filter: -9.255963e+061 result=40 15:03:34 Get A/D value=-858993460 result=40 15:03:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:34 Aux= 15:03:34 Message to Camera, serial 55149 queued 15:03:38 Received message from Master: op=Identify serial=55150 [UTC 2019-3-1 15:03:50] 15:04:11 Received message from Master: op=PointingHead serial=55165 15:04:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:04:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:04:11 Point started: ret=0 15:04:11 point_skyscan result=0 15:04:12 Check angles 15:04:12 SkyScan query 15:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.805<-13587 Statuses=0008 0009 15:04:12 Msec=0 True Az=112.995 Ze=-23.805 Az status=0008 Ze status=0009 15:04:13 Check angles 15:04:13 SkyScan query 15:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.18<-15012 Statuses=0008 0009 15:04:13 Msec=750 True Az=112.995 Ze=-45.18 Az status=0008 Ze status=0009 15:04:13 Check angles 15:04:13 SkyScan query 15:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.135<-16409 Statuses=0008 0009 15:04:14 Msec=1500 True Az=112.995 Ze=-66.135 Az status=0008 Ze status=0009 15:04:14 Check angles 15:04:14 SkyScan query 15:04:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 15:04:15 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 15:04:15 Check angles 15:04:15 SkyScan query 15:04:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.465<-19231 Statuses=0008 0009 15:04:15 Msec=3000 True Az=112.995 Ze=-108.465 Az status=0008 Ze status=0009 15:04:16 Check angles 15:04:16 SkyScan query 15:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.405<-20627 Statuses=0008 0009 15:04:16 Msec=3750 True Az=112.995 Ze=-129.405 Az status=0008 Ze status=0009 15:04:16 Check angles 15:04:16 SkyScan query 15:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.375<-22025 Statuses=0008 0009 15:04:17 Msec=4500 True Az=112.995 Ze=-150.375 Az status=0008 Ze status=0009 15:04:17 Check angles 15:04:17 SkyScan query 15:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0008 0009 15:04:18 Msec=5250 True Az=112.995 Ze=-171.465 Az status=0008 Ze status=0009 15:04:18 Check angles 15:04:18 SkyScan query 15:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:04:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:04:18 Message to Master queued w/err=0: serial=55165 error=0 15:04:23 Received message from Master: op=Filter serial=55166 15:04:23 Color wheel filter change from 0 to 0 15:04:23 FLIGetFilterPos err=0 currentPosition=0 15:04:23 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:23 Filter is already there-color wheel unchanged 15:04:24 Received message from Master: op=Shutter serial=55167 15:04:24 Shutter LASER open 15:04:24 Received message from Camera: op=State serial=55169 15:04:24 GetSingleValue result=40 Value=cccccccc 15:04:24 SkyScan query 15:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:04:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:24 Parameters OK 15:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:24 Set A/D data flow result=40 15:04:24 Set A/D channel type result=40 15:04:24 Set A/D encoding result=40 15:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:24 Set channel filter=0.000000e+000 result=40 15:04:24 Config A/D Result=40 15:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:24 Get A/D filter: -9.255963e+061 result=40 15:04:24 Get A/D value=-858993460 result=40 15:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:24 Parameters OK 15:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:24 Set A/D data flow result=40 15:04:24 Set A/D channel type result=40 15:04:24 Set A/D encoding result=40 15:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:24 Set channel filter=0.000000e+000 result=40 15:04:24 Config A/D Result=40 15:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:24 Get A/D filter: -9.255963e+061 result=40 15:04:24 Get A/D value=-858993460 result=40 15:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:24 Aux= 15:04:24 Message to Camera, serial 55169 queued 15:04:33 Received message from Master: op=Shutter serial=55179 15:04:33 Shutter LASER close 15:04:33 Received message from Master: op=PointingHead serial=55183 15:04:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:04:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:04:34 Point started: ret=0 15:04:34 point_skyscan result=0 15:04:34 Check angles 15:04:34 SkyScan query 15:04:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 15:04:35 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 15:04:35 Check angles 15:04:35 SkyScan query 15:04:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.335<-20089 Statuses=0008 0009 15:04:36 Msec=750 True Az=112.995 Ze=-121.335 Az status=0008 Ze status=0009 15:04:36 Check angles 15:04:36 SkyScan query 15:04:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.38<-18692 Statuses=0008 0009 15:04:36 Msec=1500 True Az=112.995 Ze=-100.38 Az status=0008 Ze status=0009 15:04:37 Check angles 15:04:37 SkyScan query 15:04:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 15:04:37 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 15:04:37 Check angles 15:04:37 SkyScan query 15:04:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 15:04:38 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 15:04:38 Check angles 15:04:38 SkyScan query 15:04:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.515<-14501 Statuses=0008 0009 15:04:39 Msec=3750 True Az=112.995 Ze=-37.515 Az status=0008 Ze status=0009 15:04:39 Check angles 15:04:39 SkyScan query 15:04:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.53<-13102 Statuses=0008 0009 15:04:39 Msec=4500 True Az=112.995 Ze=-16.53 Az status=0008 Ze status=0009 15:04:40 Check angles 15:04:40 SkyScan query 15:04:40 SkyScan query done: ret=0 az=112.995<-7533 ze=4.335<-11711 Statuses=0008 0009 15:04:40 Msec=5250 True Az=112.995 Ze=4.335 Az status=0008 Ze status=0009 15:04:40 Check angles 15:04:40 SkyScan query 15:04:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:04:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:04:41 Message to Master queued w/err=0: serial=55183 error=0 15:04:46 Received message from Master: op=Filter serial=55184 15:04:46 Color wheel filter change from 0 to 0 15:04:46 FLIGetFilterPos err=0 currentPosition=0 15:04:46 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:46 Filter is already there-color wheel unchanged 15:04:46 Received message from Master: op=Shutter serial=55185 15:04:46 Shutter LASER close 15:04:46 Received message from Camera: op=State serial=55187 15:04:46 GetSingleValue result=40 Value=cccccccc 15:04:46 SkyScan query 15:04:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:04:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:47 Parameters OK 15:04:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:47 Set A/D data flow result=40 15:04:47 Set A/D channel type result=40 15:04:47 Set A/D encoding result=40 15:04:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:47 Set channel filter=0.000000e+000 result=40 15:04:47 Config A/D Result=40 15:04:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:47 Get A/D filter: -9.255963e+061 result=40 15:04:47 Get A/D value=-858993460 result=40 15:04:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:47 Parameters OK 15:04:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:47 Set A/D data flow result=40 15:04:47 Set A/D channel type result=40 15:04:47 Set A/D encoding result=40 15:04:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:47 Set channel filter=0.000000e+000 result=40 15:04:47 Config A/D Result=40 15:04:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:47 Get A/D filter: -9.255963e+061 result=40 15:04:47 Get A/D value=-858993460 result=40 15:04:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:47 Aux= 15:04:47 Message to Camera, serial 55187 queued 15:05:24 Received message from Master: op=PointingHead serial=55200 15:05:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:05:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:05:24 Point started: ret=0 15:05:24 point_skyscan result=0 15:05:25 Check angles 15:05:25 SkyScan query 15:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:05:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:05:25 Message to Master queued w/err=0: serial=55200 error=0 15:05:30 Received message from Master: op=Filter serial=55201 15:05:30 Color wheel filter change from 0 to 0 15:05:30 FLIGetFilterPos err=0 currentPosition=0 15:05:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:30 Filter is already there-color wheel unchanged 15:05:30 Received message from Master: op=Shutter serial=55202 15:05:30 Shutter LASER close 15:05:31 Received message from Camera: op=State serial=55204 15:05:31 GetSingleValue result=40 Value=cccccccc 15:05:31 SkyScan query 15:05:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:05:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:31 Parameters OK 15:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:31 Set A/D data flow result=40 15:05:31 Set A/D channel type result=40 15:05:31 Set A/D encoding result=40 15:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:31 Set channel filter=0.000000e+000 result=40 15:05:31 Config A/D Result=40 15:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:31 Get A/D filter: -9.255963e+061 result=40 15:05:31 Get A/D value=-858993460 result=40 15:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:31 Parameters OK 15:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:31 Set A/D data flow result=40 15:05:31 Set A/D channel type result=40 15:05:31 Set A/D encoding result=40 15:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:31 Set channel filter=0.000000e+000 result=40 15:05:31 Config A/D Result=40 15:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:31 Get A/D filter: -9.255963e+061 result=40 15:05:31 Get A/D value=-858993460 result=40 15:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:31 Aux= 15:05:31 Message to Camera, serial 55204 queued 15:06:08 Received message from Master: op=PointingHead serial=55217 15:06:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:06:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:06:08 Point started: ret=0 15:06:08 point_skyscan result=0 15:06:09 Check angles 15:06:09 SkyScan query 15:06:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:06:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:06:10 Message to Master queued w/err=0: serial=55217 error=0 15:06:15 Received message from Master: op=Filter serial=55218 15:06:15 Color wheel filter change from 0 to 0 15:06:15 FLIGetFilterPos err=0 currentPosition=0 15:06:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:15 Filter is already there-color wheel unchanged 15:06:15 Received message from Master: op=Shutter serial=55219 15:06:15 Shutter LASER close 15:06:15 Received message from Camera: op=State serial=55221 15:06:15 GetSingleValue result=40 Value=cccccccc 15:06:15 SkyScan query 15:06:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:06:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:15 Parameters OK 15:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:15 Set A/D data flow result=40 15:06:15 Set A/D channel type result=40 15:06:15 Set A/D encoding result=40 15:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:15 Set channel filter=0.000000e+000 result=40 15:06:15 Config A/D Result=40 15:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:15 Get A/D filter: -9.255963e+061 result=40 15:06:15 Get A/D value=-858993460 result=40 15:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:15 Parameters OK 15:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:15 Set A/D data flow result=40 15:06:15 Set A/D channel type result=40 15:06:15 Set A/D encoding result=40 15:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:15 Set channel filter=0.000000e+000 result=40 15:06:15 Config A/D Result=40 15:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:15 Get A/D filter: -9.255963e+061 result=40 15:06:15 Get A/D value=-858993460 result=40 15:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:15 Aux= 15:06:15 Message to Camera, serial 55221 queued 15:06:52 Received message from Master: op=PointingHead serial=55234 15:06:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:06:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:06:53 Point started: ret=0 15:06:53 point_skyscan result=0 15:06:53 Check angles 15:06:53 SkyScan query 15:06:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:06:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:06:54 Message to Master queued w/err=0: serial=55234 error=0 15:06:59 Received message from Master: op=Filter serial=55235 15:06:59 Color wheel filter change from 0 to 0 15:06:59 FLIGetFilterPos err=0 currentPosition=0 15:06:59 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:59 Filter is already there-color wheel unchanged 15:06:59 Received message from Master: op=Shutter serial=55236 15:06:59 Shutter LASER close 15:06:59 Received message from Camera: op=State serial=55238 15:06:59 GetSingleValue result=40 Value=cccccccc 15:06:59 SkyScan query 15:07:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:07:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:00 Parameters OK 15:07:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:00 Set A/D data flow result=40 15:07:00 Set A/D channel type result=40 15:07:00 Set A/D encoding result=40 15:07:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:00 Set channel filter=0.000000e+000 result=40 15:07:00 Config A/D Result=40 15:07:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:00 Get A/D filter: -9.255963e+061 result=40 15:07:00 Get A/D value=-858993460 result=40 15:07:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:00 Parameters OK 15:07:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:00 Set A/D data flow result=40 15:07:00 Set A/D channel type result=40 15:07:00 Set A/D encoding result=40 15:07:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:00 Set channel filter=0.000000e+000 result=40 15:07:00 Config A/D Result=40 15:07:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:00 Get A/D filter: -9.255963e+061 result=40 15:07:00 Get A/D value=-858993460 result=40 15:07:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:00 Aux= 15:07:00 Message to Camera, serial 55238 queued 15:07:37 Received message from Master: op=PointingHead serial=55251 15:07:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:07:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:07:37 Point started: ret=0 15:07:37 point_skyscan result=0 15:07:38 Check angles 15:07:38 SkyScan query 15:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 15:07:38 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 15:07:38 Check angles 15:07:38 SkyScan query 15:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.835<-14989 Statuses=0008 0009 15:07:39 Msec=750 True Az=112.995 Ze=-44.835 Az status=0008 Ze status=0009 15:07:39 Check angles 15:07:39 SkyScan query 15:07:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.225<-16415 Statuses=0008 0009 15:07:40 Msec=1500 True Az=112.995 Ze=-66.225 Az status=0008 Ze status=0009 15:07:40 Check angles 15:07:40 SkyScan query 15:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.18<-17812 Statuses=0008 0009 15:07:41 Msec=2250 True Az=112.995 Ze=-87.18 Az status=0008 Ze status=0009 15:07:41 Check angles 15:07:41 SkyScan query 15:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.135<-19209 Statuses=0008 0009 15:07:41 Msec=3000 True Az=112.995 Ze=-108.135 Az status=0008 Ze status=0009 15:07:41 Check angles 15:07:41 SkyScan query 15:07:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.075<-20605 Statuses=0008 0009 15:07:42 Msec=3750 True Az=112.995 Ze=-129.075 Az status=0008 Ze status=0009 15:07:42 Check angles 15:07:42 SkyScan query 15:07:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.045<-22003 Statuses=0008 0009 15:07:43 Msec=4500 True Az=112.995 Ze=-150.045 Az status=0008 Ze status=0009 15:07:43 Check angles 15:07:43 SkyScan query 15:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0008 0009 15:07:44 Msec=5250 True Az=112.995 Ze=-170.895 Az status=0008 Ze status=0009 15:07:44 Check angles 15:07:44 SkyScan query 15:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:07:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:07:44 Message to Master queued w/err=0: serial=55251 error=0 15:07:49 Received message from Master: op=Filter serial=55252 15:07:49 Color wheel filter change from 0 to 0 15:07:49 FLIGetFilterPos err=0 currentPosition=0 15:07:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:49 Filter is already there-color wheel unchanged 15:07:49 Received message from Master: op=Shutter serial=55253 15:07:49 Shutter LASER open 15:07:50 Received message from Camera: op=State serial=55255 15:07:50 GetSingleValue result=40 Value=cccccccc 15:07:50 SkyScan query 15:07:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:07:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:50 Parameters OK 15:07:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:50 Set A/D data flow result=40 15:07:50 Set A/D channel type result=40 15:07:50 Set A/D encoding result=40 15:07:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:50 Set channel filter=0.000000e+000 result=40 15:07:50 Config A/D Result=40 15:07:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:50 Get A/D filter: -9.255963e+061 result=40 15:07:50 Get A/D value=-858993460 result=40 15:07:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:50 Parameters OK 15:07:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:50 Set A/D data flow result=40 15:07:50 Set A/D channel type result=40 15:07:50 Set A/D encoding result=40 15:07:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:50 Set channel filter=0.000000e+000 result=40 15:07:50 Config A/D Result=40 15:07:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:50 Get A/D filter: -9.255963e+061 result=40 15:07:50 Get A/D value=-858993460 result=40 15:07:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:50 Aux= 15:07:50 Message to Camera, serial 55255 queued 15:07:59 Received message from Master: op=Shutter serial=55265 15:07:59 Shutter LASER close 15:07:59 Received message from Master: op=PointingHead serial=55269 15:07:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:07:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:08:00 Point started: ret=0 15:08:00 point_skyscan result=0 15:08:00 Check angles 15:08:00 SkyScan query 15:08:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.13<-21542 Statuses=0008 0009 15:08:01 Msec=0 True Az=112.995 Ze=-143.13 Az status=0008 Ze status=0009 15:08:01 Check angles 15:08:01 SkyScan query 15:08:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.725<-20115 Statuses=0008 0009 15:08:02 Msec=750 True Az=112.995 Ze=-121.725 Az status=0008 Ze status=0009 15:08:02 Check angles 15:08:02 SkyScan query 15:08:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 15:08:02 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 15:08:03 Check angles 15:08:03 SkyScan query 15:08:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.83<-17322 Statuses=0008 0009 15:08:03 Msec=2250 True Az=112.995 Ze=-79.83 Az status=0008 Ze status=0009 15:08:03 Check angles 15:08:03 SkyScan query 15:08:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.89<-15926 Statuses=0008 0009 15:08:04 Msec=3000 True Az=112.995 Ze=-58.89 Az status=0008 Ze status=0009 15:08:04 Check angles 15:08:04 SkyScan query 15:08:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.92<-14528 Statuses=0008 0009 15:08:05 Msec=3750 True Az=112.995 Ze=-37.92 Az status=0008 Ze status=0009 15:08:05 Check angles 15:08:05 SkyScan query 15:08:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.95<-13130 Statuses=0008 0009 15:08:05 Msec=4500 True Az=112.995 Ze=-16.95 Az status=0008 Ze status=0009 15:08:06 Check angles 15:08:06 SkyScan query 15:08:06 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 15:08:06 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 15:08:06 Check angles 15:08:06 SkyScan query 15:08:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:08:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:08:07 Message to Master queued w/err=0: serial=55269 error=0 15:08:12 Received message from Master: op=Filter serial=55270 15:08:12 Color wheel filter change from 0 to 0 15:08:12 FLIGetFilterPos err=0 currentPosition=0 15:08:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:12 Filter is already there-color wheel unchanged 15:08:12 Received message from Master: op=Shutter serial=55271 15:08:12 Shutter LASER close 15:08:12 Received message from Camera: op=State serial=55273 15:08:12 GetSingleValue result=40 Value=cccccccc 15:08:12 SkyScan query 15:08:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:08:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:13 Parameters OK 15:08:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:13 Set A/D data flow result=40 15:08:13 Set A/D channel type result=40 15:08:13 Set A/D encoding result=40 15:08:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:13 Set channel filter=0.000000e+000 result=40 15:08:13 Config A/D Result=40 15:08:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:13 Get A/D filter: -9.255963e+061 result=40 15:08:13 Get A/D value=-858993460 result=40 15:08:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:13 Parameters OK 15:08:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:13 Set A/D data flow result=40 15:08:13 Set A/D channel type result=40 15:08:13 Set A/D encoding result=40 15:08:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:13 Set channel filter=0.000000e+000 result=40 15:08:13 Config A/D Result=40 15:08:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:13 Get A/D filter: -9.255963e+061 result=40 15:08:13 Get A/D value=-858993460 result=40 15:08:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:13 Aux= 15:08:13 Message to Camera, serial 55273 queued 15:08:50 Received message from Master: op=PointingHead serial=55286 15:08:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:08:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:08:50 Point started: ret=0 15:08:50 point_skyscan result=0 15:08:51 Check angles 15:08:51 SkyScan query 15:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:08:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:08:51 Message to Master queued w/err=0: serial=55286 error=0 15:08:56 Received message from Master: op=Filter serial=55287 15:08:56 Color wheel filter change from 0 to 0 15:08:56 FLIGetFilterPos err=0 currentPosition=0 15:08:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:56 Filter is already there-color wheel unchanged 15:08:56 Received message from Master: op=Shutter serial=55288 15:08:56 Shutter LASER close 15:08:57 Received message from Camera: op=State serial=55290 15:08:57 GetSingleValue result=40 Value=cccccccc 15:08:57 SkyScan query 15:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:08:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:57 Parameters OK 15:08:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:57 Set A/D data flow result=40 15:08:57 Set A/D channel type result=40 15:08:57 Set A/D encoding result=40 15:08:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:57 Set channel filter=0.000000e+000 result=40 15:08:57 Config A/D Result=40 15:08:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:57 Get A/D filter: -9.255963e+061 result=40 15:08:57 Get A/D value=-858993460 result=40 15:08:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:57 Parameters OK 15:08:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:57 Set A/D data flow result=40 15:08:57 Set A/D channel type result=40 15:08:57 Set A/D encoding result=40 15:08:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:57 Set channel filter=0.000000e+000 result=40 15:08:57 Config A/D Result=40 15:08:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:57 Get A/D filter: -9.255963e+061 result=40 15:08:57 Get A/D value=-858993460 result=40 15:08:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:57 Aux= 15:08:57 Message to Camera, serial 55290 queued 15:09:34 Received message from Master: op=PointingHead serial=55303 15:09:34 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:09:34 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:09:34 Point started: ret=0 15:09:34 point_skyscan result=0 15:09:35 Check angles 15:09:35 SkyScan query 15:09:36 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 15:09:36 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 15:09:36 Check angles 15:09:36 SkyScan query 15:09:36 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 15:09:36 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 15:09:37 Check angles 15:09:37 SkyScan query 15:09:37 SkyScan query done: ret=0 az=171.18<-11412 ze=-6.495<-12433 Statuses=0009 0008 15:09:37 Msec=1500 True Az=171.18 Ze=-6.495 Az status=0009 Ze status=0008 15:09:37 Check angles 15:09:37 SkyScan query 15:09:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:09:38 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:09:38 Message to Master queued w/err=0: serial=55303 error=0 15:09:43 Received message from Master: op=Filter serial=55304 15:09:43 Color wheel filter change from 0 to 0 15:09:43 FLIGetFilterPos err=0 currentPosition=0 15:09:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:43 Filter is already there-color wheel unchanged 15:09:43 Received message from Master: op=Shutter serial=55305 15:09:43 Shutter LASER close 15:09:43 Received message from Camera: op=State serial=55307 15:09:43 GetSingleValue result=40 Value=cccccccc 15:09:43 SkyScan query 15:09:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:09:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:44 Parameters OK 15:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:44 Set A/D data flow result=40 15:09:44 Set A/D channel type result=40 15:09:44 Set A/D encoding result=40 15:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:44 Set channel filter=0.000000e+000 result=40 15:09:44 Config A/D Result=40 15:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:44 Get A/D filter: -9.255963e+061 result=40 15:09:44 Get A/D value=-858993460 result=40 15:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:44 Parameters OK 15:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:44 Set A/D data flow result=40 15:09:44 Set A/D channel type result=40 15:09:44 Set A/D encoding result=40 15:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:44 Set channel filter=0.000000e+000 result=40 15:09:44 Config A/D Result=40 15:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:44 Get A/D filter: -9.255963e+061 result=40 15:09:44 Get A/D value=-858993460 result=40 15:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:44 Aux= 15:09:44 Message to Camera, serial 55307 queued 15:10:20 Received message from Master: op=PointingHead serial=55320 15:10:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:10:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:10:21 Point started: ret=0 15:10:21 point_skyscan result=0 15:10:22 Check angles 15:10:22 SkyScan query 15:10:22 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 15:10:22 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 15:10:22 Check angles 15:10:22 SkyScan query 15:10:23 SkyScan query done: ret=0 az=135.24<-9016 ze=6.495<-11567 Statuses=0009 0008 15:10:23 Msec=750 True Az=135.24 Ze=6.495 Az status=0009 Ze status=0008 15:10:23 Check angles 15:10:23 SkyScan query 15:10:24 SkyScan query done: ret=0 az=117.75<-7850 ze=6.495<-11567 Statuses=0009 0008 15:10:24 Msec=1500 True Az=117.75 Ze=6.495 Az status=0009 Ze status=0008 15:10:24 Check angles 15:10:24 SkyScan query 15:10:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:10:24 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:10:24 Message to Master queued w/err=0: serial=55320 error=0 15:10:29 Received message from Master: op=Filter serial=55321 15:10:29 Color wheel filter change from 0 to 0 15:10:29 FLIGetFilterPos err=0 currentPosition=0 15:10:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:10:29 Filter is already there-color wheel unchanged 15:10:30 Received message from Master: op=Shutter serial=55322 15:10:30 Shutter LASER close 15:10:30 Received message from Camera: op=State serial=55324 15:10:30 GetSingleValue result=40 Value=cccccccc 15:10:30 SkyScan query 15:10:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:10:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:30 Parameters OK 15:10:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:30 Set A/D data flow result=40 15:10:30 Set A/D channel type result=40 15:10:30 Set A/D encoding result=40 15:10:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:30 Set channel filter=0.000000e+000 result=40 15:10:30 Config A/D Result=40 15:10:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:30 Get A/D filter: -9.255963e+061 result=40 15:10:30 Get A/D value=-858993460 result=40 15:10:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:30 Parameters OK 15:10:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:30 Set A/D data flow result=40 15:10:30 Set A/D channel type result=40 15:10:30 Set A/D encoding result=40 15:10:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:30 Set channel filter=0.000000e+000 result=40 15:10:30 Config A/D Result=40 15:10:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:30 Get A/D filter: -9.255963e+061 result=40 15:10:30 Get A/D value=-858993460 result=40 15:10:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:10:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:10:30 Aux= 15:10:30 Message to Camera, serial 55324 queued 15:11:06 Received message from Master: op=PointingHead serial=55336 15:11:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:11:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:11:06 Point started: ret=0 15:11:06 point_skyscan result=0 15:11:07 Check angles 15:11:07 SkyScan query 15:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 15:11:08 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 15:11:08 Check angles 15:11:08 SkyScan query 15:11:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 15:11:09 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 15:11:09 Check angles 15:11:09 SkyScan query 15:11:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 15:11:09 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 15:11:09 Check angles 15:11:09 SkyScan query 15:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 15:11:10 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 15:11:10 Check angles 15:11:10 SkyScan query 15:11:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.355<-19157 Statuses=0008 0009 15:11:11 Msec=3000 True Az=112.995 Ze=-107.355 Az status=0008 Ze status=0009 15:11:11 Check angles 15:11:11 SkyScan query 15:11:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.295<-20553 Statuses=0008 0009 15:11:12 Msec=3750 True Az=112.995 Ze=-128.295 Az status=0008 Ze status=0009 15:11:12 Check angles 15:11:12 SkyScan query 15:11:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.265<-21951 Statuses=0008 0009 15:11:12 Msec=4500 True Az=112.995 Ze=-149.265 Az status=0008 Ze status=0009 15:11:12 Check angles 15:11:12 SkyScan query 15:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.22<-23348 Statuses=0008 0009 15:11:13 Msec=5250 True Az=112.995 Ze=-170.22 Az status=0008 Ze status=0009 15:11:13 Check angles 15:11:13 SkyScan query 15:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:11:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:11:14 Message to Master queued w/err=0: serial=55336 error=0 15:11:19 Received message from Master: op=Filter serial=55337 15:11:19 Color wheel filter change from 0 to 0 15:11:19 FLIGetFilterPos err=0 currentPosition=0 15:11:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:19 Filter is already there-color wheel unchanged 15:11:19 Received message from Master: op=Shutter serial=55338 15:11:19 Shutter LASER open 15:11:19 Received message from Camera: op=State serial=55340 15:11:19 GetSingleValue result=40 Value=cccccccc 15:11:19 SkyScan query 15:11:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:11:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:20 Parameters OK 15:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:20 Set A/D data flow result=40 15:11:20 Set A/D channel type result=40 15:11:20 Set A/D encoding result=40 15:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:20 Set channel filter=0.000000e+000 result=40 15:11:20 Config A/D Result=40 15:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:20 Get A/D filter: -9.255963e+061 result=40 15:11:20 Get A/D value=-858993460 result=40 15:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:20 Parameters OK 15:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:20 Set A/D data flow result=40 15:11:20 Set A/D channel type result=40 15:11:20 Set A/D encoding result=40 15:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:20 Set channel filter=0.000000e+000 result=40 15:11:20 Config A/D Result=40 15:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:20 Get A/D filter: -9.255963e+061 result=40 15:11:20 Get A/D value=-858993460 result=40 15:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:20 Aux= 15:11:20 Message to Camera, serial 55340 queued 15:11:28 Received message from Master: op=Shutter serial=55350 15:11:28 Shutter LASER close 15:11:29 Received message from Master: op=PointingHead serial=55354 15:11:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:11:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:11:29 Point started: ret=0 15:11:29 point_skyscan result=0 15:11:30 Check angles 15:11:30 SkyScan query 15:11:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.1<-21540 Statuses=0008 0009 15:11:30 Msec=0 True Az=112.995 Ze=-143.1 Az status=0008 Ze status=0009 15:11:30 Check angles 15:11:30 SkyScan query 15:11:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 15:11:31 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 15:11:31 Check angles 15:11:31 SkyScan query 15:11:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 15:11:32 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 15:11:32 Check angles 15:11:32 SkyScan query 15:11:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.265<-17351 Statuses=0008 0009 15:11:33 Msec=2250 True Az=112.995 Ze=-80.265 Az status=0008 Ze status=0009 15:11:33 Check angles 15:11:33 SkyScan query 15:11:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.325<-15955 Statuses=0008 0009 15:11:33 Msec=3000 True Az=112.995 Ze=-59.325 Az status=0008 Ze status=0009 15:11:33 Check angles 15:11:33 SkyScan query 15:11:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.355<-14557 Statuses=0008 0009 15:11:34 Msec=3750 True Az=112.995 Ze=-38.355 Az status=0008 Ze status=0009 15:11:34 Check angles 15:11:34 SkyScan query 15:11:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.935<-13129 Statuses=0008 0009 15:11:35 Msec=4500 True Az=112.995 Ze=-16.935 Az status=0008 Ze status=0009 15:11:35 Check angles 15:11:35 SkyScan query 15:11:36 SkyScan query done: ret=0 az=112.995<-7533 ze=4.02<-11732 Statuses=0008 0009 15:11:36 Msec=5250 True Az=112.995 Ze=4.02 Az status=0008 Ze status=0009 15:11:36 Check angles 15:11:36 SkyScan query 15:11:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:11:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:11:36 Message to Master queued w/err=0: serial=55354 error=0 15:11:41 Received message from Master: op=Filter serial=55355 15:11:41 Color wheel filter change from 0 to 0 15:11:41 FLIGetFilterPos err=0 currentPosition=0 15:11:41 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:41 Filter is already there-color wheel unchanged 15:11:41 Received message from Master: op=Shutter serial=55356 15:11:41 Shutter LASER close 15:11:42 Received message from Camera: op=State serial=55358 15:11:42 GetSingleValue result=40 Value=cccccccc 15:11:42 SkyScan query 15:11:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:11:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:42 Parameters OK 15:11:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:42 Set A/D data flow result=40 15:11:42 Set A/D channel type result=40 15:11:42 Set A/D encoding result=40 15:11:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:42 Set channel filter=0.000000e+000 result=40 15:11:42 Config A/D Result=40 15:11:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:42 Get A/D filter: -9.255963e+061 result=40 15:11:42 Get A/D value=-858993460 result=40 15:11:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:42 Parameters OK 15:11:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:42 Set A/D data flow result=40 15:11:42 Set A/D channel type result=40 15:11:42 Set A/D encoding result=40 15:11:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:42 Set channel filter=0.000000e+000 result=40 15:11:42 Config A/D Result=40 15:11:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:42 Get A/D filter: -9.255963e+061 result=40 15:11:42 Get A/D value=-858993460 result=40 15:11:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:42 Aux= 15:11:42 Message to Camera, serial 55358 queued 15:12:19 Received message from Master: op=PointingHead serial=55371 15:12:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:12:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:12:19 Point started: ret=0 15:12:19 point_skyscan result=0 15:12:20 Check angles 15:12:20 SkyScan query 15:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:12:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:12:21 Message to Master queued w/err=0: serial=55371 error=0 15:12:26 Received message from Master: op=Filter serial=55372 15:12:26 Color wheel filter change from 0 to 0 15:12:26 FLIGetFilterPos err=0 currentPosition=0 15:12:26 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:26 Filter is already there-color wheel unchanged 15:12:26 Received message from Master: op=Shutter serial=55373 15:12:26 Shutter LASER close 15:12:26 Received message from Camera: op=State serial=55375 15:12:26 GetSingleValue result=40 Value=cccccccc 15:12:26 SkyScan query 15:12:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:12:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:26 Parameters OK 15:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:26 Set A/D data flow result=40 15:12:26 Set A/D channel type result=40 15:12:26 Set A/D encoding result=40 15:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:26 Set channel filter=0.000000e+000 result=40 15:12:26 Config A/D Result=40 15:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:26 Get A/D filter: -9.255963e+061 result=40 15:12:26 Get A/D value=-858993460 result=40 15:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:26 Parameters OK 15:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:26 Set A/D data flow result=40 15:12:26 Set A/D channel type result=40 15:12:26 Set A/D encoding result=40 15:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:26 Set channel filter=0.000000e+000 result=40 15:12:26 Config A/D Result=40 15:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:26 Get A/D filter: -9.255963e+061 result=40 15:12:26 Get A/D value=-858993460 result=40 15:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:26 Aux= 15:12:26 Message to Camera, serial 55375 queued 15:13:03 Received message from Master: op=PointingHead serial=55388 15:13:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:13:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:13:04 Point started: ret=0 15:13:04 point_skyscan result=0 15:13:04 Check angles 15:13:04 SkyScan query 15:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:13:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:13:05 Message to Master queued w/err=0: serial=55388 error=0 15:13:10 Received message from Master: op=Filter serial=55389 15:13:10 Color wheel filter change from 0 to 0 15:13:10 FLIGetFilterPos err=0 currentPosition=0 15:13:10 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:10 Filter is already there-color wheel unchanged 15:13:10 Received message from Master: op=Shutter serial=55390 15:13:10 Shutter LASER close 15:13:10 Received message from Camera: op=State serial=55392 15:13:10 GetSingleValue result=40 Value=cccccccc 15:13:10 SkyScan query 15:13:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:13:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:11 Parameters OK 15:13:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:11 Set A/D data flow result=40 15:13:11 Set A/D channel type result=40 15:13:11 Set A/D encoding result=40 15:13:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:11 Set channel filter=0.000000e+000 result=40 15:13:11 Config A/D Result=40 15:13:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:11 Get A/D filter: -9.255963e+061 result=40 15:13:11 Get A/D value=-858993460 result=40 15:13:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:11 Parameters OK 15:13:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:11 Set A/D data flow result=40 15:13:11 Set A/D channel type result=40 15:13:11 Set A/D encoding result=40 15:13:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:11 Set channel filter=0.000000e+000 result=40 15:13:11 Config A/D Result=40 15:13:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:11 Get A/D filter: -9.255963e+061 result=40 15:13:11 Get A/D value=-858993460 result=40 15:13:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:11 Aux= 15:13:11 Message to Camera, serial 55392 queued 15:13:48 Received message from Master: op=PointingHead serial=55405 15:13:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:13:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:13:48 Point started: ret=0 15:13:48 point_skyscan result=0 15:13:49 Check angles 15:13:49 SkyScan query 15:13:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:13:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:13:49 Message to Master queued w/err=0: serial=55405 error=0 15:13:54 Received message from Master: op=Filter serial=55406 15:13:54 Color wheel filter change from 0 to 0 15:13:54 FLIGetFilterPos err=0 currentPosition=0 15:13:54 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:54 Filter is already there-color wheel unchanged 15:13:55 Received message from Master: op=Shutter serial=55407 15:13:55 Shutter LASER close 15:13:55 Received message from Camera: op=State serial=55409 15:13:55 GetSingleValue result=40 Value=cccccccc 15:13:55 SkyScan query 15:13:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:13:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:55 Parameters OK 15:13:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:55 Set A/D data flow result=40 15:13:55 Set A/D channel type result=40 15:13:55 Set A/D encoding result=40 15:13:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:55 Set channel filter=0.000000e+000 result=40 15:13:55 Config A/D Result=40 15:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:55 Get A/D filter: -9.255963e+061 result=40 15:13:55 Get A/D value=-858993460 result=40 15:13:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:55 Parameters OK 15:13:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:55 Set A/D data flow result=40 15:13:55 Set A/D channel type result=40 15:13:55 Set A/D encoding result=40 15:13:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:55 Set channel filter=0.000000e+000 result=40 15:13:55 Config A/D Result=40 15:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:55 Get A/D filter: -9.255963e+061 result=40 15:13:55 Get A/D value=-858993460 result=40 15:13:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:55 Aux= 15:13:55 Message to Camera, serial 55409 queued 15:14:32 Received message from Master: op=PointingHead serial=55422 15:14:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:14:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:14:32 Point started: ret=0 15:14:32 point_skyscan result=0 15:14:33 Check angles 15:14:33 SkyScan query 15:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 15:14:34 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 15:14:34 Check angles 15:14:34 SkyScan query 15:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 [UTC 2019-3-1 15:14:34] 15:14:34 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 15:14:35 Check angles 15:14:35 SkyScan query 15:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 15:14:35 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 15:14:35 Check angles 15:14:35 SkyScan query 15:14:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 15:14:36 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 15:14:36 Check angles 15:14:36 SkyScan query 15:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 15:14:37 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 15:14:37 Check angles 15:14:37 SkyScan query 15:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.43<-20562 Statuses=0008 0009 15:14:37 Msec=3750 True Az=112.995 Ze=-128.43 Az status=0008 Ze status=0009 15:14:38 Check angles 15:14:38 SkyScan query 15:14:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 15:14:38 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 15:14:38 Check angles 15:14:38 SkyScan query 15:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 15:14:39 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 15:14:39 Check angles 15:14:39 SkyScan query 15:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:14:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:14:40 Message to Master queued w/err=0: serial=55422 error=0 15:14:45 Received message from Master: op=Filter serial=55423 15:14:45 Color wheel filter change from 0 to 0 15:14:45 FLIGetFilterPos err=0 currentPosition=0 15:14:45 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:45 Filter is already there-color wheel unchanged 15:14:45 Received message from Master: op=Shutter serial=55424 15:14:45 Shutter LASER open 15:14:45 Received message from Camera: op=State serial=55426 15:14:45 GetSingleValue result=40 Value=cccccccc 15:14:45 SkyScan query 15:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:14:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:46 Parameters OK 15:14:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:46 Set A/D data flow result=40 15:14:46 Set A/D channel type result=40 15:14:46 Set A/D encoding result=40 15:14:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:46 Set channel filter=0.000000e+000 result=40 15:14:46 Config A/D Result=40 15:14:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:46 Get A/D filter: -9.255963e+061 result=40 15:14:46 Get A/D value=-858993460 result=40 15:14:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:46 Parameters OK 15:14:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:46 Set A/D data flow result=40 15:14:46 Set A/D channel type result=40 15:14:46 Set A/D encoding result=40 15:14:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:46 Set channel filter=0.000000e+000 result=40 15:14:46 Config A/D Result=40 15:14:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:46 Get A/D filter: -9.255963e+061 result=40 15:14:46 Get A/D value=-858993460 result=40 15:14:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:46 Aux= 15:14:46 Message to Camera, serial 55426 queued 15:14:54 Received message from Master: op=Shutter serial=55436 15:14:54 Shutter LASER close 15:14:55 Received message from Master: op=PointingHead serial=55440 15:14:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:14:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:14:55 Point started: ret=0 15:14:55 point_skyscan result=0 15:14:56 Check angles 15:14:56 SkyScan query 15:14:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 15:14:56 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 15:14:57 Check angles 15:14:57 SkyScan query 15:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 15:14:57 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 15:14:57 Check angles 15:14:57 SkyScan query 15:14:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 15:14:58 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 15:14:58 Check angles 15:14:58 SkyScan query 15:14:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.025<-17335 Statuses=0008 0009 15:14:59 Msec=2250 True Az=112.995 Ze=-80.025 Az status=0008 Ze status=0009 15:14:59 Check angles 15:14:59 SkyScan query 15:14:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 15:14:59 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 15:15:00 Check angles 15:15:00 SkyScan query 15:15:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.68<-14512 Statuses=0008 0009 15:15:00 Msec=3750 True Az=112.995 Ze=-37.68 Az status=0008 Ze status=0009 15:15:00 Check angles 15:15:00 SkyScan query 15:15:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.26<-13084 Statuses=0008 0009 15:15:01 Msec=4500 True Az=112.995 Ze=-16.26 Az status=0008 Ze status=0009 15:15:01 Check angles 15:15:01 SkyScan query 15:15:02 SkyScan query done: ret=0 az=112.995<-7533 ze=4.56<-11696 Statuses=0008 0009 15:15:02 Msec=5250 True Az=112.995 Ze=4.56 Az status=0008 Ze status=0009 15:15:02 Check angles 15:15:02 SkyScan query 15:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:15:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:15:03 Message to Master queued w/err=0: serial=55440 error=0 15:15:08 Received message from Master: op=Filter serial=55441 15:15:08 Color wheel filter change from 0 to 0 15:15:08 FLIGetFilterPos err=0 currentPosition=0 15:15:08 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:08 Filter is already there-color wheel unchanged 15:15:08 Received message from Master: op=Shutter serial=55442 15:15:08 Shutter LASER close 15:15:08 Received message from Camera: op=State serial=55444 15:15:08 GetSingleValue result=40 Value=cccccccc 15:15:08 SkyScan query 15:15:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:15:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:08 Parameters OK 15:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:08 Set A/D data flow result=40 15:15:08 Set A/D channel type result=40 15:15:08 Set A/D encoding result=40 15:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:08 Set channel filter=0.000000e+000 result=40 15:15:08 Config A/D Result=40 15:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:08 Get A/D filter: -9.255963e+061 result=40 15:15:08 Get A/D value=-858993460 result=40 15:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:08 Parameters OK 15:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:08 Set A/D data flow result=40 15:15:08 Set A/D channel type result=40 15:15:08 Set A/D encoding result=40 15:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:08 Set channel filter=0.000000e+000 result=40 15:15:08 Config A/D Result=40 15:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:08 Get A/D filter: -9.255963e+061 result=40 15:15:08 Get A/D value=-858993460 result=40 15:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:08 Aux= 15:15:08 Message to Camera, serial 55444 queued 15:15:45 Received message from Master: op=PointingHead serial=55457 15:15:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:15:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:15:46 Point started: ret=0 15:15:46 point_skyscan result=0 15:15:46 Check angles 15:15:46 SkyScan query 15:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:15:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:15:47 Message to Master queued w/err=0: serial=55457 error=0 15:15:52 Received message from Master: op=Filter serial=55458 15:15:52 Color wheel filter change from 0 to 0 15:15:52 FLIGetFilterPos err=0 currentPosition=0 15:15:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:52 Filter is already there-color wheel unchanged 15:15:52 Received message from Master: op=Shutter serial=55459 15:15:52 Shutter LASER close 15:15:52 Received message from Camera: op=State serial=55461 15:15:52 GetSingleValue result=40 Value=cccccccc 15:15:52 SkyScan query 15:15:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:15:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:53 Parameters OK 15:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:53 Set A/D data flow result=40 15:15:53 Set A/D channel type result=40 15:15:53 Set A/D encoding result=40 15:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:53 Set channel filter=0.000000e+000 result=40 15:15:53 Config A/D Result=40 15:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:53 Get A/D filter: -9.255963e+061 result=40 15:15:53 Get A/D value=-858993460 result=40 15:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:53 Parameters OK 15:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:53 Set A/D data flow result=40 15:15:53 Set A/D channel type result=40 15:15:53 Set A/D encoding result=40 15:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:53 Set channel filter=0.000000e+000 result=40 15:15:53 Config A/D Result=40 15:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:53 Get A/D filter: -9.255963e+061 result=40 15:15:53 Get A/D value=-858993460 result=40 15:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:53 Aux= 15:15:53 Message to Camera, serial 55461 queued 15:16:30 Received message from Master: op=PointingHead serial=55474 15:16:30 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:16:30 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:16:30 Point started: ret=0 15:16:30 point_skyscan result=0 15:16:31 Check angles 15:16:31 SkyScan query 15:16:31 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 15:16:31 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 15:16:31 Check angles 15:16:31 SkyScan query 15:16:32 SkyScan query done: ret=0 az=153.99<-10266 ze=-6.495<-12433 Statuses=0009 0008 15:16:32 Msec=750 True Az=153.99 Ze=-6.495 Az status=0009 Ze status=0008 15:16:32 Check angles 15:16:32 SkyScan query 15:16:33 SkyScan query done: ret=0 az=171.57<-11438 ze=-6.495<-12433 Statuses=0009 0008 15:16:33 Msec=1500 True Az=171.57 Ze=-6.495 Az status=0009 Ze status=0008 15:16:33 Check angles 15:16:33 SkyScan query 15:16:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:16:33 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:16:33 Message to Master queued w/err=0: serial=55474 error=0 15:16:38 Received message from Master: op=Filter serial=55475 15:16:38 Color wheel filter change from 0 to 0 15:16:38 FLIGetFilterPos err=0 currentPosition=0 15:16:38 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:38 Filter is already there-color wheel unchanged 15:16:39 Received message from Master: op=Shutter serial=55476 15:16:39 Shutter LASER close 15:16:39 Received message from Camera: op=State serial=55478 15:16:39 GetSingleValue result=40 Value=cccccccc 15:16:39 SkyScan query 15:16:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:16:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:39 Parameters OK 15:16:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:39 Set A/D data flow result=40 15:16:39 Set A/D channel type result=40 15:16:39 Set A/D encoding result=40 15:16:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:39 Set channel filter=0.000000e+000 result=40 15:16:39 Config A/D Result=40 15:16:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:39 Get A/D filter: -9.255963e+061 result=40 15:16:39 Get A/D value=-858993460 result=40 15:16:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:39 Parameters OK 15:16:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:39 Set A/D data flow result=40 15:16:39 Set A/D channel type result=40 15:16:39 Set A/D encoding result=40 15:16:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:39 Set channel filter=0.000000e+000 result=40 15:16:39 Config A/D Result=40 15:16:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:39 Get A/D filter: -9.255963e+061 result=40 15:16:39 Get A/D value=-858993460 result=40 15:16:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:39 Aux= 15:16:39 Message to Camera, serial 55478 queued 15:17:16 Received message from Master: op=PointingHead serial=55491 15:17:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:17:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:17:16 Point started: ret=0 15:17:16 point_skyscan result=0 15:17:17 Check angles 15:17:17 SkyScan query 15:17:18 SkyScan query done: ret=0 az=152.595<-10173 ze=6.51<-11566 Statuses=0009 0008 15:17:18 Msec=0 True Az=152.595 Ze=6.51 Az status=0009 Ze status=0008 15:17:18 Check angles 15:17:18 SkyScan query 15:17:19 SkyScan query done: ret=0 az=134.7<-8980 ze=6.495<-11567 Statuses=0009 0008 15:17:19 Msec=750 True Az=134.7 Ze=6.495 Az status=0009 Ze status=0008 15:17:19 Check angles 15:17:19 SkyScan query 15:17:19 SkyScan query done: ret=0 az=117.225<-7815 ze=6.495<-11567 Statuses=0009 0008 15:17:19 Msec=1500 True Az=117.225 Ze=6.495 Az status=0009 Ze status=0008 15:17:19 Check angles 15:17:19 SkyScan query 15:17:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:17:20 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:17:20 Message to Master queued w/err=0: serial=55491 error=0 15:17:25 Received message from Master: op=Filter serial=55492 15:17:25 Color wheel filter change from 0 to 0 15:17:25 FLIGetFilterPos err=0 currentPosition=0 15:17:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:17:25 Filter is already there-color wheel unchanged 15:17:25 Received message from Master: op=Shutter serial=55493 15:17:25 Shutter LASER close 15:17:25 Received message from Camera: op=State serial=55495 15:17:25 GetSingleValue result=40 Value=cccccccc 15:17:25 SkyScan query 15:17:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:17:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:26 Parameters OK 15:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:26 Set A/D data flow result=40 15:17:26 Set A/D channel type result=40 15:17:26 Set A/D encoding result=40 15:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:26 Set channel filter=0.000000e+000 result=40 15:17:26 Config A/D Result=40 15:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:26 Get A/D filter: -9.255963e+061 result=40 15:17:26 Get A/D value=-858993460 result=40 15:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:26 Parameters OK 15:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:26 Set A/D data flow result=40 15:17:26 Set A/D channel type result=40 15:17:26 Set A/D encoding result=40 15:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:26 Set channel filter=0.000000e+000 result=40 15:17:26 Config A/D Result=40 15:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:26 Get A/D filter: -9.255963e+061 result=40 15:17:26 Get A/D value=-858993460 result=40 15:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:17:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:17:26 Aux= 15:17:26 Message to Camera, serial 55495 queued 15:18:03 Received message from Master: op=PointingHead serial=55508 15:18:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:18:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:18:03 Point started: ret=0 15:18:03 point_skyscan result=0 15:18:04 Check angles 15:18:04 SkyScan query 15:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 15:18:04 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 15:18:05 Check angles 15:18:05 SkyScan query 15:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.82<-14988 Statuses=0008 0009 15:18:05 Msec=750 True Az=112.995 Ze=-44.82 Az status=0008 Ze status=0009 15:18:05 Check angles 15:18:05 SkyScan query 15:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 15:18:06 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 15:18:06 Check angles 15:18:06 SkyScan query 15:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 15:18:07 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 15:18:07 Check angles 15:18:07 SkyScan query 15:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 15:18:07 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 15:18:08 Check angles 15:18:08 SkyScan query 15:18:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.045<-20603 Statuses=0008 0009 15:18:08 Msec=3750 True Az=112.995 Ze=-129.045 Az status=0008 Ze status=0009 15:18:08 Check angles 15:18:08 SkyScan query 15:18:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-150<-22000 Statuses=0008 0009 15:18:09 Msec=4500 True Az=112.995 Ze=-150 Az status=0008 Ze status=0009 15:18:09 Check angles 15:18:09 SkyScan query 15:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0008 0009 15:18:10 Msec=5250 True Az=112.995 Ze=-171.21 Az status=0008 Ze status=0009 15:18:10 Check angles 15:18:10 SkyScan query 15:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:18:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:18:10 Message to Master queued w/err=0: serial=55508 error=0 15:18:15 Received message from Master: op=Filter serial=55509 15:18:15 Color wheel filter change from 0 to 0 15:18:15 FLIGetFilterPos err=0 currentPosition=0 15:18:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:15 Filter is already there-color wheel unchanged 15:18:16 Received message from Master: op=Shutter serial=55510 15:18:16 Shutter LASER open 15:18:16 Received message from Camera: op=State serial=55512 15:18:16 GetSingleValue result=40 Value=cccccccc 15:18:16 SkyScan query 15:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:18:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:16 Parameters OK 15:18:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:16 Set A/D data flow result=40 15:18:16 Set A/D channel type result=40 15:18:16 Set A/D encoding result=40 15:18:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:16 Set channel filter=0.000000e+000 result=40 15:18:16 Config A/D Result=40 15:18:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:16 Get A/D filter: -9.255963e+061 result=40 15:18:16 Get A/D value=-858993460 result=40 15:18:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:16 Parameters OK 15:18:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:16 Set A/D data flow result=40 15:18:16 Set A/D channel type result=40 15:18:16 Set A/D encoding result=40 15:18:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:16 Set channel filter=0.000000e+000 result=40 15:18:16 Config A/D Result=40 15:18:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:16 Get A/D filter: -9.255963e+061 result=40 15:18:16 Get A/D value=-858993460 result=40 15:18:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:16 Aux= 15:18:16 Message to Camera, serial 55512 queued 15:18:24 Received message from Master: op=Shutter serial=55521 15:18:24 Shutter LASER close 15:18:24 Received message from Master: op=PointingHead serial=55525 15:18:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:18:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:18:25 Point started: ret=0 15:18:25 point_skyscan result=0 15:18:25 Check angles 15:18:25 SkyScan query 15:18:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 15:18:26 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 15:18:26 Check angles 15:18:26 SkyScan query 15:18:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 15:18:27 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 15:18:27 Check angles 15:18:27 SkyScan query 15:18:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.28<-18752 Statuses=0008 0009 15:18:27 Msec=1500 True Az=112.995 Ze=-101.28 Az status=0008 Ze status=0009 15:18:28 Check angles 15:18:28 SkyScan query 15:18:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.325<-17355 Statuses=0008 0009 15:18:28 Msec=2250 True Az=112.995 Ze=-80.325 Az status=0008 Ze status=0009 15:18:28 Check angles 15:18:28 SkyScan query 15:18:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.385<-15959 Statuses=0008 0009 15:18:29 Msec=3000 True Az=112.995 Ze=-59.385 Az status=0008 Ze status=0009 15:18:29 Check angles 15:18:29 SkyScan query 15:18:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.415<-14561 Statuses=0008 0009 15:18:30 Msec=3750 True Az=112.995 Ze=-38.415 Az status=0008 Ze status=0009 15:18:30 Check angles 15:18:30 SkyScan query 15:18:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.46<-13164 Statuses=0008 0009 15:18:30 Msec=4500 True Az=112.995 Ze=-17.46 Az status=0008 Ze status=0009 15:18:31 Check angles 15:18:31 SkyScan query 15:18:31 SkyScan query done: ret=0 az=112.995<-7533 ze=3.51<-11766 Statuses=0008 0009 15:18:31 Msec=5250 True Az=112.995 Ze=3.51 Az status=0008 Ze status=0009 15:18:31 Check angles 15:18:31 SkyScan query 15:18:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:18:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:18:32 Message to Master queued w/err=0: serial=55525 error=0 15:18:37 Received message from Master: op=Filter serial=55526 15:18:37 Color wheel filter change from 0 to 0 15:18:37 FLIGetFilterPos err=0 currentPosition=0 15:18:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:37 Filter is already there-color wheel unchanged 15:18:37 Received message from Master: op=Shutter serial=55527 15:18:37 Shutter LASER close 15:18:37 Received message from Camera: op=State serial=55529 15:18:37 GetSingleValue result=40 Value=cccccccc 15:18:37 SkyScan query 15:18:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:18:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:38 Parameters OK 15:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:38 Set A/D data flow result=40 15:18:38 Set A/D channel type result=40 15:18:38 Set A/D encoding result=40 15:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:38 Set channel filter=0.000000e+000 result=40 15:18:38 Config A/D Result=40 15:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:38 Get A/D filter: -9.255963e+061 result=40 15:18:38 Get A/D value=-858993460 result=40 15:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:38 Parameters OK 15:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:38 Set A/D data flow result=40 15:18:38 Set A/D channel type result=40 15:18:38 Set A/D encoding result=40 15:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:38 Set channel filter=0.000000e+000 result=40 15:18:38 Config A/D Result=40 15:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:38 Get A/D filter: -9.255963e+061 result=40 15:18:38 Get A/D value=-858993460 result=40 15:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:38 Aux= 15:18:38 Message to Camera, serial 55529 queued 15:19:15 Received message from Master: op=PointingHead serial=55542 15:19:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:19:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:19:15 Point started: ret=0 15:19:15 point_skyscan result=0 15:19:16 Check angles 15:19:16 SkyScan query 15:19:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:19:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:19:16 Message to Master queued w/err=0: serial=55542 error=0 15:19:21 Received message from Master: op=Filter serial=55543 15:19:21 Color wheel filter change from 0 to 0 15:19:21 FLIGetFilterPos err=0 currentPosition=0 15:19:21 FLIGetStepsRemaining err=0 RemainingSteps=0 15:19:21 Filter is already there-color wheel unchanged 15:19:22 Received message from Master: op=Shutter serial=55544 15:19:22 Shutter LASER close 15:19:22 Received message from Camera: op=State serial=55546 15:19:22 GetSingleValue result=40 Value=cccccccc 15:19:22 SkyScan query 15:19:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:19:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:22 Parameters OK 15:19:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:22 Set A/D data flow result=40 15:19:22 Set A/D channel type result=40 15:19:22 Set A/D encoding result=40 15:19:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:22 Set channel filter=0.000000e+000 result=40 15:19:22 Config A/D Result=40 15:19:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:22 Get A/D filter: -9.255963e+061 result=40 15:19:22 Get A/D value=-858993460 result=40 15:19:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:22 Parameters OK 15:19:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:22 Set A/D data flow result=40 15:19:22 Set A/D channel type result=40 15:19:22 Set A/D encoding result=40 15:19:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:22 Set channel filter=0.000000e+000 result=40 15:19:22 Config A/D Result=40 15:19:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:22 Get A/D filter: -9.255963e+061 result=40 15:19:22 Get A/D value=-858993460 result=40 15:19:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:19:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:19:22 Aux= 15:19:22 Message to Camera, serial 55546 queued 15:19:59 Received message from Master: op=PointingHead serial=55559 15:19:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:19:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:19:59 Point started: ret=0 15:19:59 point_skyscan result=0 15:20:00 Check angles 15:20:00 SkyScan query 15:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:20:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:20:01 Message to Master queued w/err=0: serial=55559 error=0 15:20:06 Received message from Master: op=Filter serial=55560 15:20:06 Color wheel filter change from 0 to 0 15:20:06 FLIGetFilterPos err=0 currentPosition=0 15:20:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:06 Filter is already there-color wheel unchanged 15:20:06 Received message from Master: op=Shutter serial=55561 15:20:06 Shutter LASER close 15:20:06 Received message from Camera: op=State serial=55563 15:20:06 GetSingleValue result=40 Value=cccccccc 15:20:06 SkyScan query 15:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:20:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:07 Parameters OK 15:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:07 Set A/D data flow result=40 15:20:07 Set A/D channel type result=40 15:20:07 Set A/D encoding result=40 15:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:07 Set channel filter=0.000000e+000 result=40 15:20:07 Config A/D Result=40 15:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:07 Get A/D filter: -9.255963e+061 result=40 15:20:07 Get A/D value=-858993460 result=40 15:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:07 Parameters OK 15:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:07 Set A/D data flow result=40 15:20:07 Set A/D channel type result=40 15:20:07 Set A/D encoding result=40 15:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:07 Set channel filter=0.000000e+000 result=40 15:20:07 Config A/D Result=40 15:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:07 Get A/D filter: -9.255963e+061 result=40 15:20:07 Get A/D value=-858993460 result=40 15:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:07 Aux= 15:20:07 Message to Camera, serial 55563 queued 15:20:43 Received message from Master: op=PointingHead serial=55576 15:20:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:20:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:20:44 Point started: ret=0 15:20:44 point_skyscan result=0 15:20:44 Check angles 15:20:44 SkyScan query 15:20:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:20:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:20:45 Message to Master queued w/err=0: serial=55576 error=0 15:20:50 Received message from Master: op=Filter serial=55577 15:20:50 Color wheel filter change from 0 to 0 15:20:50 FLIGetFilterPos err=0 currentPosition=0 15:20:50 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:50 Filter is already there-color wheel unchanged 15:20:50 Received message from Master: op=Shutter serial=55578 15:20:50 Shutter LASER close 15:20:50 Received message from Camera: op=State serial=55580 15:20:50 GetSingleValue result=40 Value=cccccccc 15:20:50 SkyScan query 15:20:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:20:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:51 Parameters OK 15:20:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:51 Set A/D data flow result=40 15:20:51 Set A/D channel type result=40 15:20:51 Set A/D encoding result=40 15:20:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:51 Set channel filter=0.000000e+000 result=40 15:20:51 Config A/D Result=40 15:20:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:51 Get A/D filter: -9.255963e+061 result=40 15:20:51 Get A/D value=-858993460 result=40 15:20:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:51 Parameters OK 15:20:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:51 Set A/D data flow result=40 15:20:51 Set A/D channel type result=40 15:20:51 Set A/D encoding result=40 15:20:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:51 Set channel filter=0.000000e+000 result=40 15:20:51 Config A/D Result=40 15:20:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:51 Get A/D filter: -9.255963e+061 result=40 15:20:51 Get A/D value=-858993460 result=40 15:20:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:51 Aux= 15:20:51 Message to Camera, serial 55580 queued 15:21:28 Received message from Master: op=PointingHead serial=55593 15:21:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:21:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:21:28 Point started: ret=0 15:21:28 point_skyscan result=0 15:21:29 Check angles 15:21:29 SkyScan query 15:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.895<-13593 Statuses=0008 0009 15:21:29 Msec=0 True Az=112.995 Ze=-23.895 Az status=0008 Ze status=0009 15:21:30 Check angles 15:21:30 SkyScan query 15:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.27<-15018 Statuses=0008 0009 15:21:30 Msec=750 True Az=112.995 Ze=-45.27 Az status=0008 Ze status=0009 15:21:30 Check angles 15:21:30 SkyScan query 15:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.225<-16415 Statuses=0008 0009 15:21:31 Msec=1500 True Az=112.995 Ze=-66.225 Az status=0008 Ze status=0009 15:21:31 Check angles 15:21:31 SkyScan query 15:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.165<-17811 Statuses=0008 0009 15:21:32 Msec=2250 True Az=112.995 Ze=-87.165 Az status=0008 Ze status=0009 15:21:32 Check angles 15:21:32 SkyScan query 15:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.12<-19208 Statuses=0008 0009 15:21:32 Msec=3000 True Az=112.995 Ze=-108.12 Az status=0008 Ze status=0009 15:21:33 Check angles 15:21:33 SkyScan query 15:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.075<-20605 Statuses=0008 0009 15:21:33 Msec=3750 True Az=112.995 Ze=-129.075 Az status=0008 Ze status=0009 15:21:33 Check angles 15:21:33 SkyScan query 15:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.465<-22031 Statuses=0008 0009 15:21:34 Msec=4500 True Az=112.995 Ze=-150.465 Az status=0008 Ze status=0009 15:21:34 Check angles 15:21:34 SkyScan query 15:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.54<-23436 Statuses=0008 0009 15:21:35 Msec=5250 True Az=112.995 Ze=-171.54 Az status=0008 Ze status=0009 15:21:35 Check angles 15:21:35 SkyScan query 15:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:21:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:21:35 Message to Master queued w/err=0: serial=55593 error=0 15:21:40 Received message from Master: op=Filter serial=55594 15:21:40 Color wheel filter change from 0 to 0 15:21:40 FLIGetFilterPos err=0 currentPosition=0 15:21:40 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:40 Filter is already there-color wheel unchanged 15:21:41 Received message from Master: op=Shutter serial=55595 15:21:41 Shutter LASER open 15:21:41 Received message from Camera: op=State serial=55597 15:21:41 GetSingleValue result=40 Value=cccccccc 15:21:41 SkyScan query 15:21:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:21:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:41 Parameters OK 15:21:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:41 Set A/D data flow result=40 15:21:41 Set A/D channel type result=40 15:21:41 Set A/D encoding result=40 15:21:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:41 Set channel filter=0.000000e+000 result=40 15:21:41 Config A/D Result=40 15:21:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:41 Get A/D filter: -9.255963e+061 result=40 15:21:41 Get A/D value=-858993460 result=40 15:21:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:41 Parameters OK 15:21:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:41 Set A/D data flow result=40 15:21:41 Set A/D channel type result=40 15:21:41 Set A/D encoding result=40 15:21:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:41 Set channel filter=0.000000e+000 result=40 15:21:41 Config A/D Result=40 15:21:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:41 Get A/D filter: -9.255963e+061 result=40 15:21:41 Get A/D value=-858993460 result=40 15:21:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:41 Aux= 15:21:41 Message to Camera, serial 55597 queued 15:21:50 Received message from Master: op=Shutter serial=55607 15:21:50 Shutter LASER close 15:21:50 Received message from Master: op=PointingHead serial=55611 15:21:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:21:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:21:51 Point started: ret=0 15:21:51 point_skyscan result=0 15:21:51 Check angles 15:21:51 SkyScan query 15:21:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.755<-21517 Statuses=0008 0009 15:21:52 Msec=0 True Az=112.995 Ze=-142.755 Az status=0008 Ze status=0009 15:21:52 Check angles 15:21:52 SkyScan query 15:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 15:21:53 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 15:21:53 Check angles 15:21:53 SkyScan query 15:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.41<-18694 Statuses=0008 0009 15:21:54 Msec=1500 True Az=112.995 Ze=-100.41 Az status=0008 Ze status=0009 15:21:54 Check angles 15:21:54 SkyScan query 15:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 15:21:54 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 15:21:54 Check angles 15:21:54 SkyScan query 15:21:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 15:21:55 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 15:21:55 Check angles 15:21:55 SkyScan query 15:21:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.095<-14473 Statuses=0008 0009 15:21:56 Msec=3750 True Az=112.995 Ze=-37.095 Az status=0008 Ze status=0009 15:21:56 Check angles 15:21:56 SkyScan query 15:21:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.14<-13076 Statuses=0008 0009 15:21:57 Msec=4500 True Az=112.995 Ze=-16.14 Az status=0008 Ze status=0009 15:21:57 Check angles 15:21:57 SkyScan query 15:21:57 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 15:21:57 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 15:21:57 Check angles 15:21:57 SkyScan query 15:21:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:21:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:21:58 Message to Master queued w/err=0: serial=55611 error=0 15:22:03 Received message from Master: op=Filter serial=55612 15:22:03 Color wheel filter change from 0 to 0 15:22:03 FLIGetFilterPos err=0 currentPosition=0 15:22:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:03 Filter is already there-color wheel unchanged 15:22:03 Received message from Master: op=Shutter serial=55613 15:22:03 Shutter LASER close 15:22:03 Received message from Camera: op=State serial=55615 15:22:03 GetSingleValue result=40 Value=cccccccc 15:22:03 SkyScan query 15:22:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:22:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:04 Parameters OK 15:22:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:04 Set A/D data flow result=40 15:22:04 Set A/D channel type result=40 15:22:04 Set A/D encoding result=40 15:22:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:04 Set channel filter=0.000000e+000 result=40 15:22:04 Config A/D Result=40 15:22:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:04 Get A/D filter: -9.255963e+061 result=40 15:22:04 Get A/D value=-858993460 result=40 15:22:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:04 Parameters OK 15:22:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:04 Set A/D data flow result=40 15:22:04 Set A/D channel type result=40 15:22:04 Set A/D encoding result=40 15:22:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:04 Set channel filter=0.000000e+000 result=40 15:22:04 Config A/D Result=40 15:22:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:04 Get A/D filter: -9.255963e+061 result=40 15:22:04 Get A/D value=-858993460 result=40 15:22:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:04 Aux= 15:22:04 Message to Camera, serial 55615 queued 15:22:41 Received message from Master: op=PointingHead serial=55628 15:22:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:22:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:22:41 Point started: ret=0 15:22:41 point_skyscan result=0 15:22:42 Check angles 15:22:42 SkyScan query 15:22:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:22:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:22:42 Message to Master queued w/err=0: serial=55628 error=0 15:22:47 Received message from Master: op=Filter serial=55629 15:22:47 Color wheel filter change from 0 to 0 15:22:47 FLIGetFilterPos err=0 currentPosition=0 15:22:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:47 Filter is already there-color wheel unchanged 15:22:48 Received message from Master: op=Shutter serial=55630 15:22:48 Shutter LASER close 15:22:48 Received message from Camera: op=State serial=55632 15:22:48 GetSingleValue result=40 Value=cccccccc 15:22:48 SkyScan query 15:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:22:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:48 Parameters OK 15:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:48 Set A/D data flow result=40 15:22:48 Set A/D channel type result=40 15:22:48 Set A/D encoding result=40 15:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:48 Set channel filter=0.000000e+000 result=40 15:22:48 Config A/D Result=40 15:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:48 Get A/D filter: -9.255963e+061 result=40 15:22:48 Get A/D value=-858993460 result=40 15:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:48 Parameters OK 15:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:48 Set A/D data flow result=40 15:22:48 Set A/D channel type result=40 15:22:48 Set A/D encoding result=40 15:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:48 Set channel filter=0.000000e+000 result=40 15:22:48 Config A/D Result=40 15:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:48 Get A/D filter: -9.255963e+061 result=40 15:22:48 Get A/D value=-858993460 result=40 15:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:48 Aux= 15:22:48 Message to Camera, serial 55632 queued 15:23:25 Received message from Master: op=PointingHead serial=55645 15:23:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:23:25 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:23:25 Point started: ret=0 15:23:25 point_skyscan result=0 15:23:26 Check angles 15:23:26 SkyScan query 15:23:27 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 15:23:27 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 15:23:27 Check angles 15:23:27 SkyScan query 15:23:27 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.495<-12433 Statuses=0009 0008 15:23:27 Msec=750 True Az=153.735 Ze=-6.495 Az status=0009 Ze status=0008 15:23:28 Check angles 15:23:28 SkyScan query 15:23:28 SkyScan query done: ret=0 az=171.285<-11419 ze=-6.495<-12433 Statuses=0009 0008 15:23:28 Msec=1500 True Az=171.285 Ze=-6.495 Az status=0009 Ze status=0008 15:23:28 Check angles 15:23:28 SkyScan query 15:23:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:23:29 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:23:29 Message to Master queued w/err=0: serial=55645 error=0 15:23:34 Received message from Master: op=Filter serial=55646 15:23:34 Color wheel filter change from 0 to 0 15:23:34 FLIGetFilterPos err=0 currentPosition=0 15:23:34 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:34 Filter is already there-color wheel unchanged 15:23:34 Received message from Master: op=Shutter serial=55647 15:23:34 Shutter LASER close 15:23:34 Received message from Camera: op=State serial=55649 15:23:34 GetSingleValue result=40 Value=cccccccc 15:23:34 SkyScan query 15:23:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:23:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:35 Parameters OK 15:23:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:35 Set A/D data flow result=40 15:23:35 Set A/D channel type result=40 15:23:35 Set A/D encoding result=40 15:23:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:35 Set channel filter=0.000000e+000 result=40 15:23:35 Config A/D Result=40 15:23:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:35 Get A/D filter: -9.255963e+061 result=40 15:23:35 Get A/D value=-858993460 result=40 15:23:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:35 Parameters OK 15:23:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:35 Set A/D data flow result=40 15:23:35 Set A/D channel type result=40 15:23:35 Set A/D encoding result=40 15:23:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:35 Set channel filter=0.000000e+000 result=40 15:23:35 Config A/D Result=40 15:23:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:35 Get A/D filter: -9.255963e+061 result=40 15:23:35 Get A/D value=-858993460 result=40 15:23:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:35 Aux= 15:23:35 Message to Camera, serial 55649 queued [UTC 2019-3-1 15:23:50] 15:24:12 Received message from Master: op=PointingHead serial=55662 15:24:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:24:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:24:12 Point started: ret=0 15:24:12 point_skyscan result=0 15:24:13 Check angles 15:24:13 SkyScan query 15:24:13 SkyScan query done: ret=0 az=152.67<-10178 ze=6.51<-11566 Statuses=0009 0008 15:24:13 Msec=0 True Az=152.67 Ze=6.51 Az status=0009 Ze status=0008 15:24:13 Check angles 15:24:13 SkyScan query 15:24:14 SkyScan query done: ret=0 az=135.255<-9017 ze=6.495<-11567 Statuses=0009 0008 15:24:14 Msec=750 True Az=135.255 Ze=6.495 Az status=0009 Ze status=0008 15:24:14 Check angles 15:24:14 SkyScan query 15:24:15 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 15:24:15 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 15:24:15 Check angles 15:24:15 SkyScan query 15:24:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:24:16 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:24:16 Message to Master queued w/err=0: serial=55662 error=0 15:24:21 Received message from Master: op=Filter serial=55663 15:24:21 Color wheel filter change from 0 to 0 15:24:21 FLIGetFilterPos err=0 currentPosition=0 15:24:21 FLIGetStepsRemaining err=0 RemainingSteps=0 15:24:21 Filter is already there-color wheel unchanged 15:24:21 Received message from Master: op=Shutter serial=55664 15:24:21 Shutter LASER close 15:24:21 Received message from Camera: op=State serial=55666 15:24:21 GetSingleValue result=40 Value=cccccccc 15:24:21 SkyScan query 15:24:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:24:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:21 Parameters OK 15:24:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:21 Set A/D data flow result=40 15:24:21 Set A/D channel type result=40 15:24:21 Set A/D encoding result=40 15:24:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:21 Set channel filter=0.000000e+000 result=40 15:24:21 Config A/D Result=40 15:24:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:21 Get A/D filter: -9.255963e+061 result=40 15:24:21 Get A/D value=-858993460 result=40 15:24:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:21 Parameters OK 15:24:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:21 Set A/D data flow result=40 15:24:21 Set A/D channel type result=40 15:24:21 Set A/D encoding result=40 15:24:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:21 Set channel filter=0.000000e+000 result=40 15:24:21 Config A/D Result=40 15:24:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:21 Get A/D filter: -9.255963e+061 result=40 15:24:21 Get A/D value=-858993460 result=40 15:24:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:24:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:24:21 Aux= 15:24:21 Message to Camera, serial 55666 queued 15:24:58 Received message from Master: op=PointingHead serial=55679 15:24:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:24:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:24:59 Point started: ret=0 15:24:59 point_skyscan result=0 15:24:59 Check angles 15:24:59 SkyScan query 15:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 15:25:00 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 15:25:00 Check angles 15:25:00 SkyScan query 15:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 15:25:01 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 15:25:01 Check angles 15:25:01 SkyScan query 15:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 15:25:01 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 15:25:02 Check angles 15:25:02 SkyScan query 15:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 15:25:02 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 15:25:02 Check angles 15:25:02 SkyScan query 15:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 15:25:03 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 15:25:03 Check angles 15:25:03 SkyScan query 15:25:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.25<-20550 Statuses=0008 0009 15:25:04 Msec=3750 True Az=112.995 Ze=-128.25 Az status=0008 Ze status=0009 15:25:04 Check angles 15:25:04 SkyScan query 15:25:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.205<-21947 Statuses=0008 0009 15:25:04 Msec=4500 True Az=112.995 Ze=-149.205 Az status=0008 Ze status=0009 15:25:05 Check angles 15:25:05 SkyScan query 15:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.145<-23343 Statuses=0008 0009 15:25:05 Msec=5250 True Az=112.995 Ze=-170.145 Az status=0008 Ze status=0009 15:25:05 Check angles 15:25:05 SkyScan query 15:25:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:25:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:25:06 Message to Master queued w/err=0: serial=55679 error=0 15:25:11 Received message from Master: op=Filter serial=55680 15:25:11 Color wheel filter change from 0 to 0 15:25:11 FLIGetFilterPos err=0 currentPosition=0 15:25:11 FLIGetStepsRemaining err=0 RemainingSteps=0 15:25:11 Filter is already there-color wheel unchanged 15:25:11 Received message from Master: op=Shutter serial=55681 15:25:11 Shutter LASER open 15:25:11 Received message from Camera: op=State serial=55683 15:25:11 GetSingleValue result=40 Value=cccccccc 15:25:11 SkyScan query 15:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:25:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:12 Parameters OK 15:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:12 Set A/D data flow result=40 15:25:12 Set A/D channel type result=40 15:25:12 Set A/D encoding result=40 15:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:12 Set channel filter=0.000000e+000 result=40 15:25:12 Config A/D Result=40 15:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:12 Get A/D filter: -9.255963e+061 result=40 15:25:12 Get A/D value=-858993460 result=40 15:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:12 Parameters OK 15:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:12 Set A/D data flow result=40 15:25:12 Set A/D channel type result=40 15:25:12 Set A/D encoding result=40 15:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:12 Set channel filter=0.000000e+000 result=40 15:25:12 Config A/D Result=40 15:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:12 Get A/D filter: -9.255963e+061 result=40 15:25:12 Get A/D value=-858993460 result=40 15:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:25:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:25:12 Aux= 15:25:12 Message to Camera, serial 55683 queued 15:25:20 Received message from Master: op=Shutter serial=55693 15:25:20 Shutter LASER close 15:25:21 Received message from Master: op=PointingHead serial=55697 15:25:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:25:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:25:21 Point started: ret=0 15:25:21 point_skyscan result=0 15:25:22 Check angles 15:25:22 SkyScan query 15:25:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 15:25:22 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 15:25:23 Check angles 15:25:23 SkyScan query 15:25:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 15:25:23 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 15:25:23 Check angles 15:25:23 SkyScan query 15:25:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 15:25:24 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 15:25:24 Check angles 15:25:24 SkyScan query 15:25:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 15:25:25 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 15:25:25 Check angles 15:25:25 SkyScan query 15:25:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 15:25:25 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 15:25:26 Check angles 15:25:26 SkyScan query 15:25:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 15:25:26 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 15:25:26 Check angles 15:25:26 SkyScan query 15:25:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.815<-13121 Statuses=0008 0009 15:25:27 Msec=4500 True Az=112.995 Ze=-16.815 Az status=0008 Ze status=0009 15:25:27 Check angles 15:25:27 SkyScan query 15:25:28 SkyScan query done: ret=0 az=112.995<-7533 ze=4.47<-11702 Statuses=0008 0009 15:25:28 Msec=5250 True Az=112.995 Ze=4.47 Az status=0008 Ze status=0009 15:25:28 Check angles 15:25:28 SkyScan query 15:25:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:25:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:25:28 Message to Master queued w/err=0: serial=55697 error=0 15:25:33 Received message from Master: op=Filter serial=55698 15:25:33 Color wheel filter change from 0 to 0 15:25:33 FLIGetFilterPos err=0 currentPosition=0 15:25:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:25:33 Filter is already there-color wheel unchanged 15:25:34 Received message from Master: op=Shutter serial=55699 15:25:34 Shutter LASER close 15:25:34 Received message from Camera: op=State serial=55701 15:25:34 GetSingleValue result=40 Value=cccccccc 15:25:34 SkyScan query 15:25:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:25:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:34 Parameters OK 15:25:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:34 Set A/D data flow result=40 15:25:34 Set A/D channel type result=40 15:25:34 Set A/D encoding result=40 15:25:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:34 Set channel filter=0.000000e+000 result=40 15:25:34 Config A/D Result=40 15:25:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:34 Get A/D filter: -9.255963e+061 result=40 15:25:34 Get A/D value=-858993460 result=40 15:25:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:34 Parameters OK 15:25:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:34 Set A/D data flow result=40 15:25:34 Set A/D channel type result=40 15:25:34 Set A/D encoding result=40 15:25:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:34 Set channel filter=0.000000e+000 result=40 15:25:34 Config A/D Result=40 15:25:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:34 Get A/D filter: -9.255963e+061 result=40 15:25:34 Get A/D value=-858993460 result=40 15:25:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:25:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:25:34 Aux= 15:25:34 Message to Camera, serial 55701 queued 15:26:11 Received message from Master: op=PointingHead serial=55714 15:26:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:26:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:26:12 Point started: ret=0 15:26:12 point_skyscan result=0 15:26:12 Check angles 15:26:12 SkyScan query 15:26:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:26:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:26:13 Message to Master queued w/err=0: serial=55714 error=0 15:26:18 Received message from Master: op=Filter serial=55715 15:26:18 Color wheel filter change from 0 to 0 15:26:18 FLIGetFilterPos err=0 currentPosition=0 15:26:18 FLIGetStepsRemaining err=0 RemainingSteps=0 15:26:18 Filter is already there-color wheel unchanged 15:26:18 Received message from Master: op=Shutter serial=55716 15:26:18 Shutter LASER close 15:26:18 Received message from Camera: op=State serial=55718 15:26:18 GetSingleValue result=40 Value=cccccccc 15:26:18 SkyScan query 15:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:26:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:19 Parameters OK 15:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:19 Set A/D data flow result=40 15:26:19 Set A/D channel type result=40 15:26:19 Set A/D encoding result=40 15:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:19 Set channel filter=0.000000e+000 result=40 15:26:19 Config A/D Result=40 15:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:19 Get A/D filter: -9.255963e+061 result=40 15:26:19 Get A/D value=-858993460 result=40 15:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:19 Parameters OK 15:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:19 Set A/D data flow result=40 15:26:19 Set A/D channel type result=40 15:26:19 Set A/D encoding result=40 15:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:19 Set channel filter=0.000000e+000 result=40 15:26:19 Config A/D Result=40 15:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:19 Get A/D filter: -9.255963e+061 result=40 15:26:19 Get A/D value=-858993460 result=40 15:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:26:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:26:19 Aux= 15:26:19 Message to Camera, serial 55718 queued 15:26:55 Received message from Master: op=PointingHead serial=55731 15:26:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:26:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:26:56 Point started: ret=0 15:26:56 point_skyscan result=0 15:26:57 Check angles 15:26:57 SkyScan query 15:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:26:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:26:57 Message to Master queued w/err=0: serial=55731 error=0 15:27:02 Received message from Master: op=Filter serial=55732 15:27:02 Color wheel filter change from 0 to 0 15:27:02 FLIGetFilterPos err=0 currentPosition=0 15:27:02 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:02 Filter is already there-color wheel unchanged 15:27:02 Received message from Master: op=Shutter serial=55733 15:27:02 Shutter LASER close 15:27:02 Received message from Camera: op=State serial=55735 15:27:02 GetSingleValue result=40 Value=cccccccc 15:27:02 SkyScan query 15:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:27:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:03 Parameters OK 15:27:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:03 Set A/D data flow result=40 15:27:03 Set A/D channel type result=40 15:27:03 Set A/D encoding result=40 15:27:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:03 Set channel filter=0.000000e+000 result=40 15:27:03 Config A/D Result=40 15:27:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:03 Get A/D filter: -9.255963e+061 result=40 15:27:03 Get A/D value=-858993460 result=40 15:27:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:03 Parameters OK 15:27:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:03 Set A/D data flow result=40 15:27:03 Set A/D channel type result=40 15:27:03 Set A/D encoding result=40 15:27:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:03 Set channel filter=0.000000e+000 result=40 15:27:03 Config A/D Result=40 15:27:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:03 Get A/D filter: -9.255963e+061 result=40 15:27:03 Get A/D value=-858993460 result=40 15:27:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:03 Aux= 15:27:03 Message to Camera, serial 55735 queued 15:27:40 Received message from Master: op=PointingHead serial=55748 15:27:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:27:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:27:40 Point started: ret=0 15:27:40 point_skyscan result=0 15:27:41 Check angles 15:27:41 SkyScan query 15:27:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:27:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:27:41 Message to Master queued w/err=0: serial=55748 error=0 15:27:46 Received message from Master: op=Filter serial=55749 15:27:46 Color wheel filter change from 0 to 0 15:27:46 FLIGetFilterPos err=0 currentPosition=0 15:27:46 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:46 Filter is already there-color wheel unchanged 15:27:47 Received message from Master: op=Shutter serial=55750 15:27:47 Shutter LASER close 15:27:47 Received message from Camera: op=State serial=55752 15:27:47 GetSingleValue result=40 Value=cccccccc 15:27:47 SkyScan query 15:27:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:27:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:47 Parameters OK 15:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:47 Set A/D data flow result=40 15:27:47 Set A/D channel type result=40 15:27:47 Set A/D encoding result=40 15:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:47 Set channel filter=0.000000e+000 result=40 15:27:47 Config A/D Result=40 15:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:47 Get A/D filter: -9.255963e+061 result=40 15:27:47 Get A/D value=-858993460 result=40 15:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:47 Parameters OK 15:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:47 Set A/D data flow result=40 15:27:47 Set A/D channel type result=40 15:27:47 Set A/D encoding result=40 15:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:47 Set channel filter=0.000000e+000 result=40 15:27:47 Config A/D Result=40 15:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:47 Get A/D filter: -9.255963e+061 result=40 15:27:47 Get A/D value=-858993460 result=40 15:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:47 Aux= 15:27:47 Message to Camera, serial 55752 queued 15:28:24 Received message from Master: op=PointingHead serial=55765 15:28:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:28:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:28:24 Point started: ret=0 15:28:24 point_skyscan result=0 15:28:25 Check angles 15:28:25 SkyScan query 15:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 15:28:26 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 15:28:26 Check angles 15:28:26 SkyScan query 15:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 15:28:27 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 15:28:27 Check angles 15:28:27 SkyScan query 15:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-66<-16400 Statuses=0008 0009 15:28:27 Msec=1500 True Az=112.995 Ze=-66 Az status=0008 Ze status=0009 15:28:27 Check angles 15:28:27 SkyScan query 15:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.94<-17796 Statuses=0008 0009 15:28:28 Msec=2250 True Az=112.995 Ze=-86.94 Az status=0008 Ze status=0009 15:28:28 Check angles 15:28:28 SkyScan query 15:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.33<-19222 Statuses=0008 0009 15:28:29 Msec=3000 True Az=112.995 Ze=-108.33 Az status=0008 Ze status=0009 15:28:29 Check angles 15:28:29 SkyScan query 15:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.72<-20648 Statuses=0008 0009 15:28:30 Msec=3750 True Az=112.995 Ze=-129.72 Az status=0008 Ze status=0009 15:28:30 Check angles 15:28:30 SkyScan query 15:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.66<-22044 Statuses=0008 0009 15:28:30 Msec=4500 True Az=112.995 Ze=-150.66 Az status=0008 Ze status=0009 15:28:30 Check angles 15:28:30 SkyScan query 15:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.375<-23425 Statuses=0008 0009 15:28:31 Msec=5250 True Az=112.995 Ze=-171.375 Az status=0008 Ze status=0009 15:28:31 Check angles 15:28:31 SkyScan query 15:28:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:28:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:28:32 Message to Master queued w/err=0: serial=55765 error=0 15:28:37 Received message from Master: op=Filter serial=55766 15:28:37 Color wheel filter change from 0 to 0 15:28:37 FLIGetFilterPos err=0 currentPosition=0 15:28:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:28:37 Filter is already there-color wheel unchanged 15:28:37 Received message from Master: op=Shutter serial=55767 15:28:37 Shutter LASER open 15:28:37 Received message from Camera: op=State serial=55769 15:28:37 GetSingleValue result=40 Value=cccccccc 15:28:37 SkyScan query 15:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:28:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:38 Parameters OK 15:28:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:38 Set A/D data flow result=40 15:28:38 Set A/D channel type result=40 15:28:38 Set A/D encoding result=40 15:28:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:38 Set channel filter=0.000000e+000 result=40 15:28:38 Config A/D Result=40 15:28:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:38 Get A/D filter: -9.255963e+061 result=40 15:28:38 Get A/D value=-858993460 result=40 15:28:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:38 Parameters OK 15:28:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:38 Set A/D data flow result=40 15:28:38 Set A/D channel type result=40 15:28:38 Set A/D encoding result=40 15:28:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:38 Set channel filter=0.000000e+000 result=40 15:28:38 Config A/D Result=40 15:28:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:38 Get A/D filter: -9.255963e+061 result=40 15:28:38 Get A/D value=-858993460 result=40 15:28:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:28:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:28:38 Aux= 15:28:38 Message to Camera, serial 55769 queued 15:28:46 Received message from Master: op=Shutter serial=55779 15:28:46 Shutter LASER close 15:28:47 Received message from Master: op=PointingHead serial=55783 15:28:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:28:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:28:47 Point started: ret=0 15:28:47 point_skyscan result=0 15:28:48 Check angles 15:28:48 SkyScan query 15:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 15:28:48 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 15:28:49 Check angles 15:28:49 SkyScan query 15:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 15:28:49 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 15:28:49 Check angles 15:28:49 SkyScan query 15:28:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 15:28:50 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 15:28:50 Check angles 15:28:50 SkyScan query 15:28:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 15:28:51 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 15:28:51 Check angles 15:28:51 SkyScan query 15:28:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 15:28:51 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 15:28:52 Check angles 15:28:52 SkyScan query 15:28:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 15:28:52 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 15:28:52 Check angles 15:28:52 SkyScan query 15:28:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.65<-13110 Statuses=0008 0009 15:28:53 Msec=4500 True Az=112.995 Ze=-16.65 Az status=0008 Ze status=0009 15:28:53 Check angles 15:28:53 SkyScan query 15:28:54 SkyScan query done: ret=0 az=112.995<-7533 ze=4.26<-11716 Statuses=0008 0009 15:28:54 Msec=5250 True Az=112.995 Ze=4.26 Az status=0008 Ze status=0009 15:28:54 Check angles 15:28:54 SkyScan query 15:28:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:28:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:28:54 Message to Master queued w/err=0: serial=55783 error=0 15:28:59 Received message from Master: op=Filter serial=55784 15:28:59 Color wheel filter change from 0 to 0 15:28:59 FLIGetFilterPos err=0 currentPosition=0 15:28:59 FLIGetStepsRemaining err=0 RemainingSteps=0 15:28:59 Filter is already there-color wheel unchanged 15:29:00 Received message from Master: op=Shutter serial=55785 15:29:00 Shutter LASER close 15:29:00 Received message from Camera: op=State serial=55787 15:29:00 GetSingleValue result=40 Value=cccccccc 15:29:00 SkyScan query 15:29:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:29:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:00 Parameters OK 15:29:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:00 Set A/D data flow result=40 15:29:00 Set A/D channel type result=40 15:29:00 Set A/D encoding result=40 15:29:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:00 Set channel filter=0.000000e+000 result=40 15:29:00 Config A/D Result=40 15:29:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:00 Get A/D filter: -9.255963e+061 result=40 15:29:00 Get A/D value=-858993460 result=40 15:29:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:00 Parameters OK 15:29:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:00 Set A/D data flow result=40 15:29:00 Set A/D channel type result=40 15:29:00 Set A/D encoding result=40 15:29:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:00 Set channel filter=0.000000e+000 result=40 15:29:00 Config A/D Result=40 15:29:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:00 Get A/D filter: -9.255963e+061 result=40 15:29:00 Get A/D value=-858993460 result=40 15:29:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:29:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:29:00 Aux= 15:29:00 Message to Camera, serial 55787 queued 15:29:37 Received message from Master: op=PointingHead serial=55800 15:29:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:29:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:29:38 Point started: ret=0 15:29:38 point_skyscan result=0 15:29:38 Check angles 15:29:38 SkyScan query 15:29:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:29:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:29:39 Message to Master queued w/err=0: serial=55800 error=0 15:29:44 Received message from Master: op=Filter serial=55801 15:29:44 Color wheel filter change from 0 to 0 15:29:44 FLIGetFilterPos err=0 currentPosition=0 15:29:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:29:44 Filter is already there-color wheel unchanged 15:29:44 Received message from Master: op=Shutter serial=55802 15:29:44 Shutter LASER close 15:29:44 Received message from Camera: op=State serial=55804 15:29:44 GetSingleValue result=40 Value=cccccccc 15:29:44 SkyScan query 15:29:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:29:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:45 Parameters OK 15:29:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:45 Set A/D data flow result=40 15:29:45 Set A/D channel type result=40 15:29:45 Set A/D encoding result=40 15:29:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:45 Set channel filter=0.000000e+000 result=40 15:29:45 Config A/D Result=40 15:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:45 Get A/D filter: -9.255963e+061 result=40 15:29:45 Get A/D value=-858993460 result=40 15:29:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:45 Parameters OK 15:29:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:45 Set A/D data flow result=40 15:29:45 Set A/D channel type result=40 15:29:45 Set A/D encoding result=40 15:29:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:45 Set channel filter=0.000000e+000 result=40 15:29:45 Config A/D Result=40 15:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:45 Get A/D filter: -9.255963e+061 result=40 15:29:45 Get A/D value=-858993460 result=40 15:29:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:29:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:29:45 Aux= 15:29:45 Message to Camera, serial 55804 queued 15:30:22 Received message from Master: op=PointingHead serial=55817 15:30:22 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:30:22 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:30:22 Point started: ret=0 15:30:22 point_skyscan result=0 15:30:23 Check angles 15:30:23 SkyScan query 15:30:23 SkyScan query done: ret=0 az=136.365<-9091 ze=-6.51<-12434 Statuses=0009 0008 15:30:23 Msec=0 True Az=136.365 Ze=-6.51 Az status=0009 Ze status=0008 15:30:23 Check angles 15:30:23 SkyScan query 15:30:24 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 15:30:24 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 15:30:24 Check angles 15:30:24 SkyScan query 15:30:25 SkyScan query done: ret=0 az=171.48<-11432 ze=-6.495<-12433 Statuses=0009 0008 15:30:25 Msec=1500 True Az=171.48 Ze=-6.495 Az status=0009 Ze status=0008 15:30:25 Check angles 15:30:25 SkyScan query 15:30:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:30:25 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:30:25 Message to Master queued w/err=0: serial=55817 error=0 15:30:30 Received message from Master: op=Filter serial=55818 15:30:30 Color wheel filter change from 0 to 0 15:30:30 FLIGetFilterPos err=0 currentPosition=0 15:30:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:30:30 Filter is already there-color wheel unchanged 15:30:31 Received message from Master: op=Shutter serial=55819 15:30:31 Shutter LASER close 15:30:31 Received message from Camera: op=State serial=55821 15:30:31 GetSingleValue result=40 Value=cccccccc 15:30:31 SkyScan query 15:30:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:30:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:31 Parameters OK 15:30:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:31 Set A/D data flow result=40 15:30:31 Set A/D channel type result=40 15:30:31 Set A/D encoding result=40 15:30:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:31 Set channel filter=0.000000e+000 result=40 15:30:31 Config A/D Result=40 15:30:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:31 Get A/D filter: -9.255963e+061 result=40 15:30:31 Get A/D value=-858993460 result=40 15:30:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:31 Parameters OK 15:30:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:31 Set A/D data flow result=40 15:30:31 Set A/D channel type result=40 15:30:31 Set A/D encoding result=40 15:30:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:31 Set channel filter=0.000000e+000 result=40 15:30:31 Config A/D Result=40 15:30:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:31 Get A/D filter: -9.255963e+061 result=40 15:30:31 Get A/D value=-858993460 result=40 15:30:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:30:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:30:31 Aux= 15:30:31 Message to Camera, serial 55821 queued 15:31:08 Received message from Master: op=PointingHead serial=55834 15:31:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:31:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:31:08 Point started: ret=0 15:31:08 point_skyscan result=0 15:31:09 Check angles 15:31:09 SkyScan query 15:31:10 SkyScan query done: ret=0 az=152.445<-10163 ze=6.51<-11566 Statuses=0009 0008 15:31:10 Msec=0 True Az=152.445 Ze=6.51 Az status=0009 Ze status=0008 15:31:10 Check angles 15:31:10 SkyScan query 15:31:11 SkyScan query done: ret=0 az=134.94<-8996 ze=6.495<-11567 Statuses=0009 0008 15:31:11 Msec=750 True Az=134.94 Ze=6.495 Az status=0009 Ze status=0008 15:31:11 Check angles 15:31:11 SkyScan query 15:31:11 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 15:31:11 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 15:31:11 Check angles 15:31:11 SkyScan query 15:31:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:31:12 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:31:12 Message to Master queued w/err=0: serial=55834 error=0 15:31:17 Received message from Master: op=Filter serial=55835 15:31:17 Color wheel filter change from 0 to 0 15:31:17 FLIGetFilterPos err=0 currentPosition=0 15:31:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:31:17 Filter is already there-color wheel unchanged 15:31:17 Received message from Master: op=Shutter serial=55836 15:31:17 Shutter LASER close 15:31:17 Received message from Camera: op=State serial=55838 15:31:17 GetSingleValue result=40 Value=cccccccc 15:31:17 SkyScan query 15:31:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:31:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:18 Parameters OK 15:31:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:18 Set A/D data flow result=40 15:31:18 Set A/D channel type result=40 15:31:18 Set A/D encoding result=40 15:31:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:18 Set channel filter=0.000000e+000 result=40 15:31:18 Config A/D Result=40 15:31:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:18 Get A/D filter: -9.255963e+061 result=40 15:31:18 Get A/D value=-858993460 result=40 15:31:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:18 Parameters OK 15:31:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:18 Set A/D data flow result=40 15:31:18 Set A/D channel type result=40 15:31:18 Set A/D encoding result=40 15:31:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:18 Set channel filter=0.000000e+000 result=40 15:31:18 Config A/D Result=40 15:31:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:18 Get A/D filter: -9.255963e+061 result=40 15:31:18 Get A/D value=-858993460 result=40 15:31:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:31:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:31:18 Aux= 15:31:18 Message to Camera, serial 55838 queued 15:31:55 Received message from Master: op=PointingHead serial=55851 15:31:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:31:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:31:55 Point started: ret=0 15:31:55 point_skyscan result=0 15:31:56 Check angles 15:31:56 SkyScan query 15:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 15:31:56 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 15:31:57 Check angles 15:31:57 SkyScan query 15:31:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 15:31:57 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 15:31:57 Check angles 15:31:57 SkyScan query 15:31:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 15:31:58 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 15:31:58 Check angles 15:31:58 SkyScan query 15:31:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.015<-17801 Statuses=0008 0009 15:31:59 Msec=2250 True Az=112.995 Ze=-87.015 Az status=0008 Ze status=0009 15:31:59 Check angles 15:31:59 SkyScan query 15:31:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 15:31:59 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 15:32:00 Check angles 15:32:00 SkyScan query 15:32:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.895<-20593 Statuses=0008 0009 15:32:00 Msec=3750 True Az=112.995 Ze=-128.895 Az status=0008 Ze status=0009 15:32:00 Check angles 15:32:00 SkyScan query 15:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.865<-21991 Statuses=0008 0009 15:32:01 Msec=4500 True Az=112.995 Ze=-149.865 Az status=0008 Ze status=0009 15:32:01 Check angles 15:32:01 SkyScan query 15:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.76<-23384 Statuses=0008 0009 15:32:02 Msec=5250 True Az=112.995 Ze=-170.76 Az status=0008 Ze status=0009 15:32:02 Check angles 15:32:02 SkyScan query 15:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:32:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:32:02 Message to Master queued w/err=0: serial=55851 error=0 15:32:07 Received message from Master: op=Filter serial=55852 15:32:07 Color wheel filter change from 0 to 0 15:32:07 FLIGetFilterPos err=0 currentPosition=0 15:32:07 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:07 Filter is already there-color wheel unchanged 15:32:08 Received message from Master: op=Shutter serial=55853 15:32:08 Shutter LASER open 15:32:08 Received message from Camera: op=State serial=55855 15:32:08 GetSingleValue result=40 Value=cccccccc 15:32:08 SkyScan query 15:32:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:32:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:08 Parameters OK 15:32:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:08 Set A/D data flow result=40 15:32:08 Set A/D channel type result=40 15:32:08 Set A/D encoding result=40 15:32:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:08 Set channel filter=0.000000e+000 result=40 15:32:08 Config A/D Result=40 15:32:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:08 Get A/D filter: -9.255963e+061 result=40 15:32:08 Get A/D value=-858993460 result=40 15:32:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:08 Parameters OK 15:32:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:08 Set A/D data flow result=40 15:32:08 Set A/D channel type result=40 15:32:08 Set A/D encoding result=40 15:32:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:08 Set channel filter=0.000000e+000 result=40 15:32:08 Config A/D Result=40 15:32:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:08 Get A/D filter: -9.255963e+061 result=40 15:32:08 Get A/D value=-858993460 result=40 15:32:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:32:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:32:08 Aux= 15:32:08 Message to Camera, serial 55855 queued 15:32:17 Received message from Master: op=Shutter serial=55865 15:32:17 Shutter LASER close 15:32:18 Received message from Master: op=PointingHead serial=55869 15:32:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:32:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:32:18 Point started: ret=0 15:32:18 point_skyscan result=0 15:32:19 Check angles 15:32:19 SkyScan query 15:32:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:32:20 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 15:32:20 Message to Master queued w/err=0: serial=55869 error=0 15:32:25 Received message from Master: op=Filter serial=55870 15:32:25 Color wheel filter change from 0 to 2 15:32:25 FLIGetFilterPos err=0 currentPosition=0 15:32:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:28 FLISetFilterPos err=0 rqPosition=2 15:32:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:28 Check after 0.00 sec for filter wheel DIn/CWh=0 15:32:28 FLIGetFilterPos err=0 currentPosition=2 15:32:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:28 Received message from Master: op=Shutter serial=55871 15:32:28 Shutter LASER close 15:32:28 Received message from Camera: op=State serial=55873 15:32:28 GetSingleValue result=40 Value=cccccccc 15:32:28 SkyScan query 15:32:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:32:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:29 Parameters OK 15:32:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:29 Set A/D data flow result=40 15:32:29 Set A/D channel type result=40 15:32:29 Set A/D encoding result=40 15:32:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:29 Set channel filter=0.000000e+000 result=40 15:32:29 Config A/D Result=40 15:32:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:29 Get A/D filter: -9.255963e+061 result=40 15:32:29 Get A/D value=-858993460 result=40 15:32:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:29 Parameters OK 15:32:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:29 Set A/D data flow result=40 15:32:29 Set A/D channel type result=40 15:32:29 Set A/D encoding result=40 15:32:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:29 Set channel filter=0.000000e+000 result=40 15:32:29 Config A/D Result=40 15:32:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:29 Get A/D filter: -9.255963e+061 result=40 15:32:29 Get A/D value=-858993460 result=40 15:32:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:32:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:32:29 Aux= 15:32:29 Message to Camera, serial 55873 queued 15:32:34 Received message from Master: op=PointingHead serial=55884 15:32:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:32:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:32:35 Point started: ret=0 15:32:35 point_skyscan result=0 15:32:36 Check angles 15:32:36 SkyScan query 15:32:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:32:36 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 15:32:36 Message to Master queued w/err=0: serial=55884 error=0 15:32:41 Received message from Master: op=Filter serial=55885 15:32:41 Color wheel filter change from 2 to 2 15:32:41 FLIGetFilterPos err=0 currentPosition=2 15:32:41 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:41 Filter is already there-color wheel unchanged 15:32:41 Received message from Master: op=Shutter serial=55886 15:32:41 Shutter LASER close 15:32:42 Received message from Camera: op=State serial=55888 15:32:42 GetSingleValue result=40 Value=cccccccc 15:32:42 SkyScan query 15:32:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:32:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:42 Parameters OK 15:32:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:42 Set A/D data flow result=40 15:32:42 Set A/D channel type result=40 15:32:42 Set A/D encoding result=40 15:32:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:42 Set channel filter=0.000000e+000 result=40 15:32:42 Config A/D Result=40 15:32:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:42 Get A/D filter: -9.255963e+061 result=40 15:32:42 Get A/D value=-858993460 result=40 15:32:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:42 Parameters OK 15:32:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:42 Set A/D data flow result=40 15:32:42 Set A/D channel type result=40 15:32:42 Set A/D encoding result=40 15:32:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:42 Set channel filter=0.000000e+000 result=40 15:32:42 Config A/D Result=40 15:32:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:42 Get A/D filter: -9.255963e+061 result=40 15:32:42 Get A/D value=-858993460 result=40 15:32:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:32:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:32:42 Aux= 15:32:42 Message to Camera, serial 55888 queued 15:33:18 Received message from Master: op=PointingHead serial=55900 15:33:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:33:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:33:18 Point started: ret=0 15:33:18 point_skyscan result=0 15:33:19 Check angles 15:33:19 SkyScan query 15:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:33:20 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 15:33:20 Message to Master queued w/err=0: serial=55900 error=0 15:33:25 Received message from Master: op=Filter serial=55901 15:33:25 Color wheel filter change from 2 to 2 15:33:25 FLIGetFilterPos err=0 currentPosition=2 15:33:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:33:25 Filter is already there-color wheel unchanged 15:33:25 Received message from Master: op=Shutter serial=55902 15:33:25 Shutter LASER close 15:33:25 Received message from Camera: op=State serial=55904 15:33:25 GetSingleValue result=40 Value=cccccccc 15:33:25 SkyScan query 15:33:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:33:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:26 Parameters OK 15:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:26 Set A/D data flow result=40 15:33:26 Set A/D channel type result=40 15:33:26 Set A/D encoding result=40 15:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:26 Set channel filter=0.000000e+000 result=40 15:33:26 Config A/D Result=40 15:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:26 Get A/D filter: -9.255963e+061 result=40 15:33:26 Get A/D value=-858993460 result=40 15:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:26 Parameters OK 15:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:26 Set A/D data flow result=40 15:33:26 Set A/D channel type result=40 15:33:26 Set A/D encoding result=40 15:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:26 Set channel filter=0.000000e+000 result=40 15:33:26 Config A/D Result=40 15:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:26 Get A/D filter: -9.255963e+061 result=40 15:33:26 Get A/D value=-858993460 result=40 15:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:33:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:33:26 Aux= 15:33:26 Message to Camera, serial 55904 queued 15:33:34 Received message from Master: op=Log close serial=55918 15:33:34 Log file close 15:33:34 * END OF LOG *